blob: d3c087f59f1a9fa4d7f9a69dcad346f3aabe3b9a [file] [log] [blame]
Manuel Lauss64cd04d2011-11-10 12:03:26 +00001/*
2 * DBAu1300 init and platform device setup.
3 *
4 * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
5 */
6
Manuel Lauss415e0fe2014-07-23 16:36:52 +02007#include <linux/clk.h>
Manuel Lauss64cd04d2011-11-10 12:03:26 +00008#include <linux/dma-mapping.h>
9#include <linux/gpio.h>
10#include <linux/gpio_keys.h>
11#include <linux/init.h>
12#include <linux/input.h> /* KEY_* codes */
13#include <linux/i2c.h>
14#include <linux/io.h>
15#include <linux/leds.h>
16#include <linux/ata_platform.h>
17#include <linux/mmc/host.h>
18#include <linux/module.h>
19#include <linux/mtd/mtd.h>
20#include <linux/mtd/nand.h>
21#include <linux/mtd/partitions.h>
22#include <linux/platform_device.h>
23#include <linux/smsc911x.h>
Manuel Laussc64bb5f2014-08-20 21:36:33 +020024#include <linux/wm97xx.h>
Manuel Lauss64cd04d2011-11-10 12:03:26 +000025
26#include <asm/mach-au1x00/au1000.h>
Alban Bedel832f5da2015-08-02 18:30:11 +020027#include <asm/mach-au1x00/gpio-au1300.h>
Manuel Lauss64cd04d2011-11-10 12:03:26 +000028#include <asm/mach-au1x00/au1100_mmc.h>
Manuel Laussa9b71a82011-11-10 12:06:21 +000029#include <asm/mach-au1x00/au1200fb.h>
Manuel Lauss64cd04d2011-11-10 12:03:26 +000030#include <asm/mach-au1x00/au1xxx_dbdma.h>
31#include <asm/mach-au1x00/au1xxx_psc.h>
Manuel Lauss64cd04d2011-11-10 12:03:26 +000032#include <asm/mach-db1x00/bcsr.h>
33#include <asm/mach-au1x00/prom.h>
34
35#include "platform.h"
36
Manuel Laussa16afa52014-03-26 10:41:48 +010037/* FPGA (external mux) interrupt sources */
38#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1)
39#define DB1300_IDE_INT (DB1300_FIRST_INT + 0)
40#define DB1300_ETH_INT (DB1300_FIRST_INT + 1)
41#define DB1300_CF_INT (DB1300_FIRST_INT + 2)
42#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4)
43#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5)
44#define DB1300_DC_INT (DB1300_FIRST_INT + 6)
45#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7)
46#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8)
47#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9)
48#define DB1300_AC97_INT (DB1300_FIRST_INT + 10)
49#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11)
50#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12)
51#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13)
52#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14)
53#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
54#define DB1300_LAST_INT (DB1300_FIRST_INT + 15)
55
56/* SMSC9210 CS */
57#define DB1300_ETH_PHYS_ADDR 0x19000000
58#define DB1300_ETH_PHYS_END 0x197fffff
59
60/* ATA CS */
61#define DB1300_IDE_PHYS_ADDR 0x18800000
62#define DB1300_IDE_REG_SHIFT 5
63#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT)
64
65/* NAND CS */
66#define DB1300_NAND_PHYS_ADDR 0x20000000
67#define DB1300_NAND_PHYS_END 0x20000fff
68
69
Manuel Lauss64cd04d2011-11-10 12:03:26 +000070static struct i2c_board_info db1300_i2c_devs[] __initdata = {
71 { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */
72 { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
73};
74
75/* multifunction pins to assign to GPIO controller */
76static int db1300_gpio_pins[] __initdata = {
77 AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
78 AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
79 AU1300_PIN_EXTCLK1,
80 -1, /* terminator */
81};
82
83/* multifunction pins to assign to device functions */
84static int db1300_dev_pins[] __initdata = {
85 /* wake-from-str pins 0-3 */
86 AU1300_PIN_WAKE0,
87 /* external clock sources for PSC0 */
88 AU1300_PIN_EXTCLK0,
89 /* 8bit MMC interface on SD0: 6-9 */
90 AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
91 AU1300_PIN_SD0DAT7,
92 /* UART1 pins: 11-18 */
93 AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
94 AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
95 AU1300_PIN_U1RX, AU1300_PIN_U1TX,
96 /* UART0 pins: 19-24 */
97 AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
98 AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
99 /* UART2: 25-26 */
100 AU1300_PIN_U2RX, AU1300_PIN_U2TX,
101 /* UART3: 27-28 */
102 AU1300_PIN_U3RX, AU1300_PIN_U3TX,
103 /* LCD controller PWMs, ext pixclock: 30-31 */
104 AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
105 /* SD1 interface: 32-37 */
106 AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
107 AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
108 /* SD2 interface: 38-43 */
109 AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
110 AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
111 /* PSC0/1 clocks: 44-45 */
112 AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
113 /* PSCs: 46-49/50-53/54-57/58-61 */
114 AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
115 AU1300_PIN_PSC0D1,
116 AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
117 AU1300_PIN_PSC1D1,
Ralf Baechle70342282013-01-22 12:59:30 +0100118 AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000119 AU1300_PIN_PSC2D1,
120 AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
121 AU1300_PIN_PSC3D1,
122 /* PCMCIA interface: 62-70 */
123 AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
124 AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
125 AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
126 /* camera interface H/V sync inputs: 71-72 */
127 AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
128 /* PSC2/3 clocks: 73-74 */
129 AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
130 -1, /* terminator */
131};
132
133static void __init db1300_gpio_config(void)
134{
135 int *i;
136
137 i = &db1300_dev_pins[0];
138 while (*i != -1)
139 au1300_pinfunc_to_dev(*i++);
140
141 i = &db1300_gpio_pins[0];
142 while (*i != -1)
143 au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
144
145 au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
146}
147
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000148/**********************************************************************/
149
150static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
151 unsigned int ctrl)
152{
Boris BREZILLONb1afda02015-12-01 12:03:01 +0100153 struct nand_chip *this = mtd_to_nand(mtd);
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000154 unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
155
156 ioaddr &= 0xffffff00;
157
158 if (ctrl & NAND_CLE) {
159 ioaddr += MEM_STNAND_CMD;
160 } else if (ctrl & NAND_ALE) {
161 ioaddr += MEM_STNAND_ADDR;
162 } else {
163 /* assume we want to r/w real data by default */
164 ioaddr += MEM_STNAND_DATA;
165 }
166 this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
167 if (cmd != NAND_CMD_NONE) {
168 __raw_writeb(cmd, this->IO_ADDR_W);
169 wmb();
170 }
171}
172
173static int au1300_nand_device_ready(struct mtd_info *mtd)
174{
Manuel Lauss9cf12162014-07-23 16:36:25 +0200175 return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000176}
177
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000178static struct mtd_partition db1300_nand_parts[] = {
179 {
180 .name = "NAND FS 0",
Ralf Baechle70342282013-01-22 12:59:30 +0100181 .offset = 0,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000182 .size = 8 * 1024 * 1024,
183 },
184 {
185 .name = "NAND FS 1",
Ralf Baechle70342282013-01-22 12:59:30 +0100186 .offset = MTDPART_OFS_APPEND,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000187 .size = MTDPART_SIZ_FULL
188 },
189};
190
191struct platform_nand_data db1300_nand_platdata = {
192 .chip = {
193 .nr_chips = 1,
194 .chip_offset = 0,
195 .nr_partitions = ARRAY_SIZE(db1300_nand_parts),
196 .partitions = db1300_nand_parts,
197 .chip_delay = 20,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000198 },
199 .ctrl = {
200 .dev_ready = au1300_nand_device_ready,
201 .cmd_ctrl = au1300_nand_cmd_ctrl,
202 },
203};
204
205static struct resource db1300_nand_res[] = {
206 [0] = {
207 .start = DB1300_NAND_PHYS_ADDR,
208 .end = DB1300_NAND_PHYS_ADDR + 0xff,
209 .flags = IORESOURCE_MEM,
210 },
211};
212
213static struct platform_device db1300_nand_dev = {
214 .name = "gen_nand",
215 .num_resources = ARRAY_SIZE(db1300_nand_res),
216 .resource = db1300_nand_res,
217 .id = -1,
218 .dev = {
219 .platform_data = &db1300_nand_platdata,
220 }
221};
222
223/**********************************************************************/
224
225static struct resource db1300_eth_res[] = {
226 [0] = {
227 .start = DB1300_ETH_PHYS_ADDR,
228 .end = DB1300_ETH_PHYS_END,
229 .flags = IORESOURCE_MEM,
230 },
231 [1] = {
232 .start = DB1300_ETH_INT,
233 .end = DB1300_ETH_INT,
234 .flags = IORESOURCE_IRQ,
235 },
236};
237
238static struct smsc911x_platform_config db1300_eth_config = {
239 .phy_interface = PHY_INTERFACE_MODE_MII,
240 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
241 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
242 .flags = SMSC911X_USE_32BIT,
243};
244
245static struct platform_device db1300_eth_dev = {
246 .name = "smsc911x",
247 .id = -1,
248 .num_resources = ARRAY_SIZE(db1300_eth_res),
249 .resource = db1300_eth_res,
250 .dev = {
251 .platform_data = &db1300_eth_config,
252 },
253};
254
255/**********************************************************************/
256
257static struct resource au1300_psc1_res[] = {
258 [0] = {
259 .start = AU1300_PSC1_PHYS_ADDR,
260 .end = AU1300_PSC1_PHYS_ADDR + 0x0fff,
261 .flags = IORESOURCE_MEM,
262 },
263 [1] = {
264 .start = AU1300_PSC1_INT,
265 .end = AU1300_PSC1_INT,
266 .flags = IORESOURCE_IRQ,
267 },
268 [2] = {
269 .start = AU1300_DSCR_CMD0_PSC1_TX,
270 .end = AU1300_DSCR_CMD0_PSC1_TX,
271 .flags = IORESOURCE_DMA,
272 },
273 [3] = {
274 .start = AU1300_DSCR_CMD0_PSC1_RX,
275 .end = AU1300_DSCR_CMD0_PSC1_RX,
276 .flags = IORESOURCE_DMA,
277 },
278};
279
280static struct platform_device db1300_ac97_dev = {
281 .name = "au1xpsc_ac97",
282 .id = 1, /* PSC ID. match with AC97 codec ID! */
283 .num_resources = ARRAY_SIZE(au1300_psc1_res),
284 .resource = au1300_psc1_res,
285};
286
287/**********************************************************************/
288
289static struct resource au1300_psc2_res[] = {
290 [0] = {
291 .start = AU1300_PSC2_PHYS_ADDR,
292 .end = AU1300_PSC2_PHYS_ADDR + 0x0fff,
293 .flags = IORESOURCE_MEM,
294 },
295 [1] = {
296 .start = AU1300_PSC2_INT,
297 .end = AU1300_PSC2_INT,
298 .flags = IORESOURCE_IRQ,
299 },
300 [2] = {
301 .start = AU1300_DSCR_CMD0_PSC2_TX,
302 .end = AU1300_DSCR_CMD0_PSC2_TX,
303 .flags = IORESOURCE_DMA,
304 },
305 [3] = {
306 .start = AU1300_DSCR_CMD0_PSC2_RX,
307 .end = AU1300_DSCR_CMD0_PSC2_RX,
308 .flags = IORESOURCE_DMA,
309 },
310};
311
312static struct platform_device db1300_i2s_dev = {
313 .name = "au1xpsc_i2s",
314 .id = 2, /* PSC ID */
315 .num_resources = ARRAY_SIZE(au1300_psc2_res),
316 .resource = au1300_psc2_res,
317};
318
319/**********************************************************************/
320
321static struct resource au1300_psc3_res[] = {
322 [0] = {
323 .start = AU1300_PSC3_PHYS_ADDR,
324 .end = AU1300_PSC3_PHYS_ADDR + 0x0fff,
325 .flags = IORESOURCE_MEM,
326 },
327 [1] = {
328 .start = AU1300_PSC3_INT,
329 .end = AU1300_PSC3_INT,
330 .flags = IORESOURCE_IRQ,
331 },
332 [2] = {
333 .start = AU1300_DSCR_CMD0_PSC3_TX,
334 .end = AU1300_DSCR_CMD0_PSC3_TX,
335 .flags = IORESOURCE_DMA,
336 },
337 [3] = {
338 .start = AU1300_DSCR_CMD0_PSC3_RX,
339 .end = AU1300_DSCR_CMD0_PSC3_RX,
340 .flags = IORESOURCE_DMA,
341 },
342};
343
344static struct platform_device db1300_i2c_dev = {
345 .name = "au1xpsc_smbus",
346 .id = 0, /* bus number */
347 .num_resources = ARRAY_SIZE(au1300_psc3_res),
348 .resource = au1300_psc3_res,
349};
350
351/**********************************************************************/
352
353/* proper key assignments when facing the LCD panel. For key assignments
354 * according to the schematics swap up with down and left with right.
355 * I chose to use it to emulate the arrow keys of a keyboard.
356 */
357static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
358 {
359 .code = KEY_DOWN,
360 .gpio = AU1300_PIN_LCDPWM0,
361 .type = EV_KEY,
362 .debounce_interval = 1,
363 .active_low = 1,
364 .desc = "5waysw-down",
365 },
366 {
367 .code = KEY_UP,
368 .gpio = AU1300_PIN_PSC2SYNC1,
369 .type = EV_KEY,
370 .debounce_interval = 1,
371 .active_low = 1,
372 .desc = "5waysw-up",
373 },
374 {
375 .code = KEY_RIGHT,
376 .gpio = AU1300_PIN_WAKE3,
377 .type = EV_KEY,
378 .debounce_interval = 1,
379 .active_low = 1,
380 .desc = "5waysw-right",
381 },
382 {
383 .code = KEY_LEFT,
384 .gpio = AU1300_PIN_WAKE2,
385 .type = EV_KEY,
386 .debounce_interval = 1,
387 .active_low = 1,
388 .desc = "5waysw-left",
389 },
390 {
391 .code = KEY_ENTER,
392 .gpio = AU1300_PIN_WAKE1,
393 .type = EV_KEY,
394 .debounce_interval = 1,
395 .active_low = 1,
396 .desc = "5waysw-push",
397 },
398};
399
400static struct gpio_keys_platform_data db1300_5waysw_data = {
401 .buttons = db1300_5waysw_arrowkeys,
402 .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys),
403 .rep = 1,
404 .name = "db1300-5wayswitch",
405};
406
407static struct platform_device db1300_5waysw_dev = {
408 .name = "gpio-keys",
409 .dev = {
410 .platform_data = &db1300_5waysw_data,
411 },
412};
413
414/**********************************************************************/
415
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000416static struct pata_platform_info db1300_ide_info = {
417 .ioport_shift = DB1300_IDE_REG_SHIFT,
418};
419
420#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT)
421static struct resource db1300_ide_res[] = {
422 [0] = {
423 .start = DB1300_IDE_PHYS_ADDR,
424 .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
425 .flags = IORESOURCE_MEM,
426 },
427 [1] = {
428 .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
429 .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
430 .flags = IORESOURCE_MEM,
431 },
432 [2] = {
433 .start = DB1300_IDE_INT,
434 .end = DB1300_IDE_INT,
435 .flags = IORESOURCE_IRQ,
436 },
437};
438
439static struct platform_device db1300_ide_dev = {
440 .dev = {
441 .platform_data = &db1300_ide_info,
442 },
443 .name = "pata_platform",
444 .resource = db1300_ide_res,
445 .num_resources = ARRAY_SIZE(db1300_ide_res),
446};
447
448/**********************************************************************/
449
450static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
451{
452 void(*mmc_cd)(struct mmc_host *, unsigned long);
453
454 /* disable the one currently screaming. No other way to shut it up */
455 if (irq == DB1300_SD1_INSERT_INT) {
456 disable_irq_nosync(DB1300_SD1_INSERT_INT);
457 enable_irq(DB1300_SD1_EJECT_INT);
458 } else {
459 disable_irq_nosync(DB1300_SD1_EJECT_INT);
460 enable_irq(DB1300_SD1_INSERT_INT);
461 }
462
463 /* link against CONFIG_MMC=m. We can only be called once MMC core has
464 * initialized the controller, so symbol_get() should always succeed.
465 */
466 mmc_cd = symbol_get(mmc_detect_change);
467 mmc_cd(ptr, msecs_to_jiffies(500));
468 symbol_put(mmc_detect_change);
469
470 return IRQ_HANDLED;
471}
472
473static int db1300_mmc_card_readonly(void *mmc_host)
474{
475 /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
476 return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
477}
478
479static int db1300_mmc_card_inserted(void *mmc_host)
480{
481 return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
482}
483
484static int db1300_mmc_cd_setup(void *mmc_host, int en)
485{
486 int ret;
487
488 if (en) {
489 ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
490 "sd_insert", mmc_host);
491 if (ret)
492 goto out;
493
494 ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
495 "sd_eject", mmc_host);
496 if (ret) {
497 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
498 goto out;
499 }
500
501 if (db1300_mmc_card_inserted(mmc_host))
502 enable_irq(DB1300_SD1_EJECT_INT);
503 else
504 enable_irq(DB1300_SD1_INSERT_INT);
505
506 } else {
507 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
508 free_irq(DB1300_SD1_EJECT_INT, mmc_host);
509 }
510 ret = 0;
511out:
512 return ret;
513}
514
515static void db1300_mmcled_set(struct led_classdev *led,
516 enum led_brightness brightness)
517{
518 if (brightness != LED_OFF)
519 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
520 else
521 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
522}
523
524static struct led_classdev db1300_mmc_led = {
Ralf Baechle70342282013-01-22 12:59:30 +0100525 .brightness_set = db1300_mmcled_set,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000526};
527
528struct au1xmmc_platform_data db1300_sd1_platdata = {
529 .cd_setup = db1300_mmc_cd_setup,
530 .card_inserted = db1300_mmc_card_inserted,
531 .card_readonly = db1300_mmc_card_readonly,
532 .led = &db1300_mmc_led,
533};
534
535static struct resource au1300_sd1_res[] = {
536 [0] = {
537 .start = AU1300_SD1_PHYS_ADDR,
538 .end = AU1300_SD1_PHYS_ADDR,
539 .flags = IORESOURCE_MEM,
540 },
541 [1] = {
542 .start = AU1300_SD1_INT,
543 .end = AU1300_SD1_INT,
544 .flags = IORESOURCE_IRQ,
545 },
546 [2] = {
547 .start = AU1300_DSCR_CMD0_SDMS_TX1,
548 .end = AU1300_DSCR_CMD0_SDMS_TX1,
549 .flags = IORESOURCE_DMA,
550 },
551 [3] = {
552 .start = AU1300_DSCR_CMD0_SDMS_RX1,
553 .end = AU1300_DSCR_CMD0_SDMS_RX1,
554 .flags = IORESOURCE_DMA,
555 },
556};
557
558static struct platform_device db1300_sd1_dev = {
559 .dev = {
560 .platform_data = &db1300_sd1_platdata,
561 },
562 .name = "au1xxx-mmc",
563 .id = 1,
564 .resource = au1300_sd1_res,
565 .num_resources = ARRAY_SIZE(au1300_sd1_res),
566};
567
568/**********************************************************************/
569
570static int db1300_movinand_inserted(void *mmc_host)
571{
572 return 0; /* disable for now, it doesn't work yet */
573}
574
575static int db1300_movinand_readonly(void *mmc_host)
576{
577 return 0;
578}
579
580static void db1300_movinand_led_set(struct led_classdev *led,
581 enum led_brightness brightness)
582{
583 if (brightness != LED_OFF)
584 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
585 else
586 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
587}
588
589static struct led_classdev db1300_movinand_led = {
590 .brightness_set = db1300_movinand_led_set,
591};
592
593struct au1xmmc_platform_data db1300_sd0_platdata = {
594 .card_inserted = db1300_movinand_inserted,
595 .card_readonly = db1300_movinand_readonly,
596 .led = &db1300_movinand_led,
597 .mask_host_caps = MMC_CAP_NEEDS_POLL,
598};
599
600static struct resource au1300_sd0_res[] = {
601 [0] = {
602 .start = AU1100_SD0_PHYS_ADDR,
603 .end = AU1100_SD0_PHYS_ADDR,
604 .flags = IORESOURCE_MEM,
605 },
606 [1] = {
607 .start = AU1300_SD0_INT,
608 .end = AU1300_SD0_INT,
609 .flags = IORESOURCE_IRQ,
610 },
611 [2] = {
612 .start = AU1300_DSCR_CMD0_SDMS_TX0,
613 .end = AU1300_DSCR_CMD0_SDMS_TX0,
614 .flags = IORESOURCE_DMA,
615 },
616 [3] = {
617 .start = AU1300_DSCR_CMD0_SDMS_RX0,
618 .end = AU1300_DSCR_CMD0_SDMS_RX0,
619 .flags = IORESOURCE_DMA,
620 },
621};
622
623static struct platform_device db1300_sd0_dev = {
624 .dev = {
625 .platform_data = &db1300_sd0_platdata,
626 },
627 .name = "au1xxx-mmc",
628 .id = 0,
629 .resource = au1300_sd0_res,
630 .num_resources = ARRAY_SIZE(au1300_sd0_res),
631};
632
633/**********************************************************************/
634
635static struct platform_device db1300_wm9715_dev = {
636 .name = "wm9712-codec",
637 .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */
638};
639
640static struct platform_device db1300_ac97dma_dev = {
641 .name = "au1xpsc-pcm",
642 .id = 1, /* PSC ID */
643};
644
645static struct platform_device db1300_i2sdma_dev = {
646 .name = "au1xpsc-pcm",
647 .id = 2, /* PSC ID */
648};
649
650static struct platform_device db1300_sndac97_dev = {
651 .name = "db1300-ac97",
652};
653
654static struct platform_device db1300_sndi2s_dev = {
655 .name = "db1300-i2s",
656};
657
658/**********************************************************************/
659
Manuel Laussa9b71a82011-11-10 12:06:21 +0000660static int db1300fb_panel_index(void)
661{
662 return 9; /* DB1300_800x480 */
663}
664
665static int db1300fb_panel_init(void)
666{
667 /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
668 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
669 BCSR_BOARD_LCDBL);
670 return 0;
671}
672
673static int db1300fb_panel_shutdown(void)
674{
675 /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
676 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
677 BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
678 return 0;
679}
680
681static struct au1200fb_platdata db1300fb_pd = {
682 .panel_index = db1300fb_panel_index,
683 .panel_init = db1300fb_panel_init,
Ralf Baechle70342282013-01-22 12:59:30 +0100684 .panel_shutdown = db1300fb_panel_shutdown,
Manuel Laussa9b71a82011-11-10 12:06:21 +0000685};
686
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000687static struct resource au1300_lcd_res[] = {
688 [0] = {
689 .start = AU1200_LCD_PHYS_ADDR,
690 .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
691 .flags = IORESOURCE_MEM,
692 },
693 [1] = {
694 .start = AU1300_LCD_INT,
695 .end = AU1300_LCD_INT,
696 .flags = IORESOURCE_IRQ,
697 }
698};
699
700static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
701
702static struct platform_device db1300_lcd_dev = {
703 .name = "au1200-lcd",
704 .id = 0,
705 .dev = {
706 .dma_mask = &au1300_lcd_dmamask,
707 .coherent_dma_mask = DMA_BIT_MASK(32),
Manuel Laussa9b71a82011-11-10 12:06:21 +0000708 .platform_data = &db1300fb_pd,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000709 },
710 .num_resources = ARRAY_SIZE(au1300_lcd_res),
711 .resource = au1300_lcd_res,
712};
713
714/**********************************************************************/
715
Manuel Laussc64bb5f2014-08-20 21:36:33 +0200716static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable)
717{
718 if (enable)
719 enable_irq(DB1300_AC97_PEN_INT);
720 else
721 disable_irq_nosync(DB1300_AC97_PEN_INT);
722}
723
724static struct wm97xx_mach_ops db1300_wm97xx_ops = {
725 .irq_enable = db1300_wm97xx_irqen,
726 .irq_gpio = WM97XX_GPIO_3,
727};
728
729static int db1300_wm97xx_probe(struct platform_device *pdev)
730{
731 struct wm97xx *wm = platform_get_drvdata(pdev);
732
733 /* external pendown indicator */
734 wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
735 WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY,
736 WM97XX_GPIO_WAKE);
737
738 /* internal "virtual" pendown gpio */
739 wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
740 WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY,
741 WM97XX_GPIO_NOWAKE);
742
743 wm->pen_irq = DB1300_AC97_PEN_INT;
744
745 return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
746}
747
748static struct platform_driver db1300_wm97xx_driver = {
749 .driver.name = "wm97xx-touch",
750 .driver.owner = THIS_MODULE,
751 .probe = db1300_wm97xx_probe,
752};
753
754/**********************************************************************/
755
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000756static struct platform_device *db1300_dev[] __initdata = {
757 &db1300_eth_dev,
758 &db1300_i2c_dev,
759 &db1300_5waysw_dev,
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000760 &db1300_nand_dev,
761 &db1300_ide_dev,
762 &db1300_sd0_dev,
763 &db1300_sd1_dev,
764 &db1300_lcd_dev,
765 &db1300_ac97_dev,
766 &db1300_i2s_dev,
767 &db1300_wm9715_dev,
768 &db1300_ac97dma_dev,
769 &db1300_i2sdma_dev,
770 &db1300_sndac97_dev,
771 &db1300_sndi2s_dev,
772};
773
Manuel Laussbd8510d2012-09-13 17:44:39 +0200774int __init db1300_dev_setup(void)
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000775{
776 int swapped, cpldirq;
Manuel Lauss415e0fe2014-07-23 16:36:52 +0200777 struct clk *c;
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000778
779 /* setup CPLD IRQ muxer */
780 cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
781 irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
782 bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
783
784 /* insert/eject IRQs: one always triggers so don't enable them
785 * when doing request_irq() on them. DB1200 has this bug too.
786 */
787 irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
788 irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
789 irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
790 irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
791
792 /*
793 * setup board
794 */
795 prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
796
797 i2c_register_board_info(0, db1300_i2c_devs,
798 ARRAY_SIZE(db1300_i2c_devs));
799
Manuel Laussc64bb5f2014-08-20 21:36:33 +0200800 if (platform_driver_register(&db1300_wm97xx_driver))
801 pr_warn("DB1300: failed to init touch pen irq support!\n");
802
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000803 /* Audio PSC clock is supplied by codecs (PSC1, 2) */
804 __raw_writel(PSC_SEL_CLK_SERCLK,
805 (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
806 wmb();
807 __raw_writel(PSC_SEL_CLK_SERCLK,
808 (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
809 wmb();
Manuel Laussc02a5052014-08-20 21:36:32 +0200810 /* I2C driver wants 50MHz, get as close as possible */
Manuel Lauss415e0fe2014-07-23 16:36:52 +0200811 c = clk_get(NULL, "psc3_intclk");
812 if (!IS_ERR(c)) {
Manuel Laussc02a5052014-08-20 21:36:32 +0200813 clk_set_rate(c, 50000000);
Manuel Lauss415e0fe2014-07-23 16:36:52 +0200814 clk_prepare_enable(c);
815 clk_put(c);
816 }
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000817 __raw_writel(PSC_SEL_CLK_INTCLK,
818 (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
819 wmb();
820
821 /* enable power to USB ports */
822 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
823
824 /* although it is socket #0, it uses the CPLD bits which previous boards
825 * have used for socket #1.
826 */
827 db1x_register_pcmcia_socket(
828 AU1000_PCMCIA_ATTR_PHYS_ADDR,
829 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
830 AU1000_PCMCIA_MEM_PHYS_ADDR,
831 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1,
832 AU1000_PCMCIA_IO_PHYS_ADDR,
833 AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1,
834 DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
835
836 swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
837 db1x_register_norflash(64 << 20, 2, swapped);
838
839 return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
840}
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000841
842
Manuel Laussbd8510d2012-09-13 17:44:39 +0200843int __init db1300_board_setup(void)
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000844{
845 unsigned short whoami;
846
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000847 bcsr_init(DB1300_BCSR_PHYS_ADDR,
848 DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
849
850 whoami = bcsr_read(BCSR_WHOAMI);
Manuel Lauss970e2682014-02-20 14:59:24 +0100851 if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300)
852 return -ENODEV;
853
854 db1300_gpio_config();
855
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000856 printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
857 "BoardID %d CPLD Rev %d DaughtercardID %d\n",
858 BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
859 BCSR_WHOAMI_DCID(whoami));
860
861 /* enable UARTs, YAMON only enables #2 */
862 alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
863 alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
864 alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
Manuel Laussbd8510d2012-09-13 17:44:39 +0200865
866 return 0;
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000867}