arch/powerpc/boot/dts/mpc8572ds.dts

/*
 * MPC8572 DS Device Tree Source
 *
 * Copyright 2007, 2008 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;
/ {
	model = "fsl,MPC8572DS";
	compatible = "fsl,MPC8572DS";
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8572@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <32>;	// 32 bytes
			i-cache-line-size = <32>;	// 32 bytes
			d-cache-size = <0x8000>;		// L1, 32K
			i-cache-size = <0x8000>;		// L1, 32K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
			next-level-cache = <&L2>;
		};

		PowerPC,8572@1 {
			device_type = "cpu";
			reg = <0x1>;
			d-cache-line-size = <32>;	// 32 bytes
			i-cache-line-size = <32>;	// 32 bytes
			d-cache-size = <0x8000>;		// L1, 32K
			i-cache-size = <0x8000>;		// L1, 32K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
			next-level-cache = <&L2>;
		};
	};

	memory {
		device_type = "memory";
	};

	localbus@ffe05000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
		reg = <0xffe05000 0x1000>;
		interrupts = <19 2>;
		interrupt-parent = <&mpic>;

		ranges = <0x0 0x0 0xe8000000 0x08000000
			  0x1 0x0 0xe0000000 0x08000000
			  0x2 0x0 0xffa00000 0x00040000
			  0x3 0x0 0xffdf0000 0x00008000
			  0x4 0x0 0xffa40000 0x00040000
			  0x5 0x0 0xffa80000 0x00040000
			  0x6 0x0 0xffac0000 0x00040000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;
			bank-width = <2>;
			device-width = <1>;

			ramdisk@0 {
				reg = <0x0 0x03000000>;
				readl-only;
			};

			diagnostic@3000000 {
				reg = <0x03000000 0x00e00000>;
				read-only;
			};

			dink@3e00000 {
				reg = <0x03e00000 0x00200000>;
				read-only;
			};

			kernel@4000000 {
				reg = <0x04000000 0x00400000>;
				read-only;
			};

			jffs2@4400000 {
				reg = <0x04400000 0x03b00000>;
			};

			dtb@7f00000 {
				reg = <0x07f00000 0x00080000>;
				read-only;
			};

			u-boot@7f80000 {
				reg = <0x07f80000 0x00080000>;
				read-only;
			};
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8572-fcm-nand",
				     "fsl,elbc-fcm-nand";
			reg = <0x2 0x0 0x40000>;

			u-boot@0 {
				reg = <0x0 0x02000000>;
				read-only;
			};

			jffs2@2000000 {
				reg = <0x02000000 0x10000000>;
			};

			ramdisk@12000000 {
				reg = <0x12000000 0x08000000>;
				read-only;
			};

			kernel@1a000000 {
				reg = <0x1a000000 0x04000000>;
			};

			dtb@1e000000 {
				reg = <0x1e000000 0x01000000>;
				read-only;
			};

			empty@1f000000 {
				reg = <0x1f000000 0x21000000>;
			};
		};

		nand@4,0 {
			compatible = "fsl,mpc8572-fcm-nand",
				     "fsl,elbc-fcm-nand";
			reg = <0x4 0x0 0x40000>;
		};

		nand@5,0 {
			compatible = "fsl,mpc8572-fcm-nand",
				     "fsl,elbc-fcm-nand";
			reg = <0x5 0x0 0x40000>;
		};

		nand@6,0 {
			compatible = "fsl,mpc8572-fcm-nand",
				     "fsl,elbc-fcm-nand";
			reg = <0x6 0x0 0x40000>;
		};
	};

	soc8572@ffe00000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x0 0 0xffe00000 0x100000>;
		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
		bus-frequency = <0>;		// Filled out by uboot.

		memory-controller@2000 {
			compatible = "fsl,mpc8572-memory-controller";
			reg = <0x2000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <18 2>;
		};

		memory-controller@6000 {
			compatible = "fsl,mpc8572-memory-controller";
			reg = <0x6000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <18 2>;
		};

		L2: l2-cache-controller@20000 {
			compatible = "fsl,mpc8572-l2-cache-controller";
			reg = <0x20000 0x1000>;
			cache-line-size = <32>;	// 32 bytes
			cache-size = <0x100000>; // L2, 1M
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		dma@c300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
			reg = <0xc300 0x4>;
			ranges = <0x0 0xc100 0x200>;
			cell-index = <1>;
			dma-channel@0 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&mpic>;
				interrupts = <76 2>;
			};
			dma-channel@80 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&mpic>;
				interrupts = <77 2>;
			};
			dma-channel@100 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&mpic>;
				interrupts = <78 2>;
			};
			dma-channel@180 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupt-parent = <&mpic>;
				interrupts = <79 2>;
			};
		};

		dma@21300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
			reg = <0x21300 0x4>;
			ranges = <0x0 0x21100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&mpic>;
				interrupts = <20 2>;
			};
			dma-channel@80 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&mpic>;
				interrupts = <21 2>;
			};
			dma-channel@100 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&mpic>;
				interrupts = <22 2>;
			};
			dma-channel@180 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupt-parent = <&mpic>;
				interrupts = <23 2>;
			};
		};

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,gianfar-mdio";
			reg = <0x24520 0x20>;

			phy0: ethernet-phy@0 {
				interrupt-parent = <&mpic>;
				interrupts = <10 1>;
				reg = <0x0>;
			};
			phy1: ethernet-phy@1 {
				interrupt-parent = <&mpic>;
				interrupts = <10 1>;
				reg = <0x1>;
			};
			phy2: ethernet-phy@2 {
				interrupt-parent = <&mpic>;
				interrupts = <10 1>;
				reg = <0x2>;
			};
			phy3: ethernet-phy@3 {
				interrupt-parent = <&mpic>;
				interrupts = <10 1>;
				reg = <0x3>;
			};
		};

		enet0: ethernet@24000 {
			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <29 2 30 2 34 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <35 2 36 2 40 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};

		enet2: ethernet@26000 {
			cell-index = <2>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x26000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <31 2 32 2 33 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy2>;
			phy-connection-type = "rgmii-id";
		};

		enet3: ethernet@27000 {
			cell-index = <3>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x27000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <37 2 38 2 39 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy3>;
			phy-connection-type = "rgmii-id";
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <0>;
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		global-utilities@e0000 {	//global utilities block
			compatible = "fsl,mpc8572-guts";
			reg = <0xe0000 0x1000>;
			fsl,has-rstcr;
		};

		msi@41600 {
			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
			reg = <0x41600 0x80>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe0 0
				0xe1 0
				0xe2 0
				0xe3 0
				0xe4 0
				0xe5 0
				0xe6 0
				0xe7 0>;
			interrupt-parent = <&mpic>;
		};

		crypto@30000 {
			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
				     "fsl,sec2.1", "fsl,sec2.0";
			reg = <0x30000 0x10000>;
			interrupts = <45 2 58 2>;
			interrupt-parent = <&mpic>;
			fsl,num-channels = <4>;
			fsl,channel-fifo-len = <24>;
			fsl,exec-units-mask = <0x9fe>;
			fsl,descriptor-types-mask = <0x3ab0ebf>;
		};

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
		};
	};

	pci0: pcie@ffe08000 {
		cell-index = <0>;
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe08000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <24 2>;
		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x11 func 0 - PCI slot 1 */
			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 1 - PCI slot 1 */
			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 2 - PCI slot 1 */
			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 3 - PCI slot 1 */
			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 4 - PCI slot 1 */
			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 5 - PCI slot 1 */
			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 6 - PCI slot 1 */
			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 7 - PCI slot 1 */
			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x12 func 0 - PCI slot 2 */
			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 1 - PCI slot 2 */
			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 2 - PCI slot 2 */
			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 3 - PCI slot 2 */
			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 4 - PCI slot 2 */
			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 5 - PCI slot 2 */
			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 6 - PCI slot 2 */
			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 7 - PCI slot 2 */
			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1

			// IDSEL 0x1c  USB
			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2

			// IDSEL 0x1d  Audio
			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2

			// IDSEL 0x1e Legacy
			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2

			// IDSEL 0x1f IDE/SATA
			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2

			>;

		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0x80000000
				  0x2000000 0x0 0x80000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
			uli1575@0 {
				reg = <0x0 0x0 0x0 0x0 0x0>;
				#size-cells = <2>;
				#address-cells = <3>;
				ranges = <0x2000000 0x0 0x80000000
					  0x2000000 0x0 0x80000000
					  0x0 0x20000000

					  0x1000000 0x0 0x0
					  0x1000000 0x0 0x0
					  0x0 0x100000>;
				isa@1e {
					device_type = "isa";
					#interrupt-cells = <2>;
					#size-cells = <1>;
					#address-cells = <2>;
					reg = <0xf000 0x0 0x0 0x0 0x0>;
					ranges = <0x1 0x0 0x1000000 0x0 0x0
						  0x1000>;
					interrupt-parent = <&i8259>;

					i8259: interrupt-controller@20 {
						reg = <0x1 0x20 0x2
						       0x1 0xa0 0x2
						       0x1 0x4d0 0x2>;
						interrupt-controller;
						device_type = "interrupt-controller";
						#address-cells = <0>;
						#interrupt-cells = <2>;
						compatible = "chrp,iic";
						interrupts = <9 2>;
						interrupt-parent = <&mpic>;
					};

					i8042@60 {
						#size-cells = <0>;
						#address-cells = <1>;
						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
						interrupts = <1 3 12 3>;
						interrupt-parent =
							<&i8259>;

						keyboard@0 {
							reg = <0x0>;
							compatible = "pnpPNP,303";
						};

						mouse@1 {
							reg = <0x1>;
							compatible = "pnpPNP,f03";
						};
					};

					rtc@70 {
						compatible = "pnpPNP,b00";
						reg = <0x1 0x70 0x2>;
					};

					gpio@400 {
						reg = <0x1 0x400 0x80>;
					};
				};
			};
		};

	};

	pci1: pcie@ffe09000 {
		cell-index = <1>;
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe09000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <26 2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x4 0x1
			0000 0x0 0x0 0x2 &mpic 0x5 0x1
			0000 0x0 0x0 0x3 &mpic 0x6 0x1
			0000 0x0 0x0 0x4 &mpic 0x7 0x1
			>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};

	pci2: pcie@ffe0a000 {
		cell-index = <2>;
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe0a000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <27 2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x0 0x1
			0000 0x0 0x0 0x2 &mpic 0x1 0x1
			0000 0x0 0x0 0x3 &mpic 0x2 0x1
			0000 0x0 0x0 0x4 &mpic 0x3 0x1
			>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0xc0000000
				  0x2000000 0x0 0xc0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};
};