blob: 58a0e0a4a325b2ef33fee3425cb6d373254cb180 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* smc-mca.c: A SMC Ultra ethernet driver for linux. */
2/*
3 Most of this driver, except for ultramca_probe is nearly
4 verbatim from smc-ultra.c by Donald Becker. The rest is
5 written and copyright 1996 by David Weis, weisd3458@uni.edu
6
7 This is a driver for the SMC Ultra and SMC EtherEZ ethercards.
8
9 This driver uses the cards in the 8390-compatible, shared memory mode.
10 Most of the run-time complexity is handled by the generic code in
11 8390.c.
12
13 This driver enables the shared memory only when doing the actual data
14 transfers to avoid a bug in early version of the card that corrupted
15 data transferred by a AHA1542.
16
17 This driver does not support the programmed-I/O data transfer mode of
18 the EtherEZ. That support (if available) is smc-ez.c. Nor does it
19 use the non-8390-compatible "Altego" mode. (No support currently planned.)
20
21 Changelog:
22
23 Paul Gortmaker : multiple card support for module users.
24 David Weis : Micro Channel-ized it.
25 Tom Sightler : Added support for IBM PS/2 Ethernet Adapter/A
26 Christopher Turcksin : Changed MCA-probe so that multiple adapters are
27 found correctly (Jul 16, 1997)
28 Chris Beauregard : Tried to merge the two changes above (Dec 15, 1997)
29 Tom Sightler : Fixed minor detection bug caused by above merge
30 Tom Sightler : Added support for three more Western Digital
31 MCA-adapters
32 Tom Sightler : Added support for 2.2.x mca_find_unused_adapter
33 Hartmut Schmidt : - Modified parameter detection to handle each
34 card differently depending on a switch-list
35 - 'card_ver' removed from the adapter list
36 - Some minor bug fixes
37*/
38
39#include <linux/mca.h>
40#include <linux/module.h>
41#include <linux/kernel.h>
42#include <linux/errno.h>
43#include <linux/string.h>
44#include <linux/init.h>
45#include <linux/netdevice.h>
46#include <linux/etherdevice.h>
47
48#include <asm/io.h>
49#include <asm/system.h>
50
51#include "8390.h"
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53#define DRV_NAME "smc-mca"
54
55static int ultramca_open(struct net_device *dev);
56static void ultramca_reset_8390(struct net_device *dev);
57static void ultramca_get_8390_hdr(struct net_device *dev,
58 struct e8390_pkt_hdr *hdr,
59 int ring_page);
60static void ultramca_block_input(struct net_device *dev, int count,
61 struct sk_buff *skb,
62 int ring_offset);
63static void ultramca_block_output(struct net_device *dev, int count,
64 const unsigned char *buf,
65 const int start_page);
66static int ultramca_close_card(struct net_device *dev);
67
68#define START_PG 0x00 /* First page of TX buffer */
69
70#define ULTRA_CMDREG 0 /* Offset to ASIC command register. */
71#define ULTRA_RESET 0x80 /* Board reset, in ULTRA_CMDREG. */
72#define ULTRA_MEMENB 0x40 /* Enable the shared memory. */
73#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */
74#define ULTRA_IO_EXTENT 32
75#define EN0_ERWCNT 0x08 /* Early receive warning count. */
76
77#define _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A 0
78#define _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A 1
79#define _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A 2
80#define _6fc1_WD_Starcard_PLUS_A_WD8003ST_A 3
81#define _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A 4
82#define _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A 5
83#define _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A 6
84#define _efe5_IBM_PS2_Adapter_A_for_Ethernet 7
85
86struct smc_mca_adapters_t {
87 unsigned int id;
88 char *name;
89};
90
91#define MAX_ULTRAMCA_CARDS 4 /* Max number of Ultra cards per module */
92
93static int ultra_io[MAX_ULTRAMCA_CARDS];
94static int ultra_irq[MAX_ULTRAMCA_CARDS];
95MODULE_LICENSE("GPL");
96
97module_param_array(ultra_io, int, NULL, 0);
98module_param_array(ultra_irq, int, NULL, 0);
99MODULE_PARM_DESC(ultra_io, "SMC Ultra/EtherEZ MCA I/O base address(es)");
100MODULE_PARM_DESC(ultra_irq, "SMC Ultra/EtherEZ MCA IRQ number(s)");
101
Adrian Bunk725c0f92005-05-12 22:24:39 -0400102static const struct {
103 unsigned int base_addr;
104} addr_table[] = {
105 { 0x0800 },
106 { 0x1800 },
107 { 0x2800 },
108 { 0x3800 },
109 { 0x4800 },
110 { 0x5800 },
111 { 0x6800 },
112 { 0x7800 },
113 { 0x8800 },
114 { 0x9800 },
115 { 0xa800 },
116 { 0xb800 },
117 { 0xc800 },
118 { 0xd800 },
119 { 0xe800 },
120 { 0xf800 }
121};
122
123#define MEM_MASK 64
124
125static const struct {
126 unsigned char mem_index;
127 unsigned long mem_start;
128 unsigned char num_pages;
129} mem_table[] = {
130 { 16, 0x0c0000, 40 },
131 { 18, 0x0c4000, 40 },
132 { 20, 0x0c8000, 40 },
133 { 22, 0x0cc000, 40 },
134 { 24, 0x0d0000, 40 },
135 { 26, 0x0d4000, 40 },
136 { 28, 0x0d8000, 40 },
137 { 30, 0x0dc000, 40 },
138 {144, 0xfc0000, 40 },
139 {148, 0xfc8000, 40 },
140 {154, 0xfd0000, 40 },
141 {156, 0xfd8000, 40 },
142 { 0, 0x0c0000, 20 },
143 { 1, 0x0c2000, 20 },
144 { 2, 0x0c4000, 20 },
145 { 3, 0x0c6000, 20 }
146};
147
148#define IRQ_MASK 243
149static const struct {
150 unsigned char new_irq;
151 unsigned char old_irq;
152} irq_table[] = {
153 { 3, 3 },
154 { 4, 4 },
155 { 10, 10 },
156 { 14, 15 }
157};
158
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159static short smc_mca_adapter_ids[] __initdata = {
160 0x61c8,
161 0x61c9,
162 0x6fc0,
163 0x6fc1,
164 0x6fc2,
165 0xefd4,
166 0xefd5,
167 0xefe5,
168 0x0000
169};
170
171static char *smc_mca_adapter_names[] __initdata = {
172 "SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)",
173 "SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)",
174 "WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)",
175 "WD Starcard PLUS/A (WD8003ST/A)",
176 "WD Ethercard PLUS 10T/A (WD8003W/A)",
177 "IBM PS/2 Adapter/A for Ethernet UTP/AUI (WD8013WP/A)",
178 "IBM PS/2 Adapter/A for Ethernet BNC/AUI (WD8013EP/A)",
179 "IBM PS/2 Adapter/A for Ethernet",
180 NULL
181};
182
183static int ultra_found = 0;
184
Adrian Bunk725c0f92005-05-12 22:24:39 -0400185static int __init ultramca_probe(struct device *gen_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186{
187 unsigned short ioaddr;
188 struct net_device *dev;
189 unsigned char reg4, num_pages;
190 struct mca_device *mca_dev = to_mca_device(gen_dev);
191 char slot = mca_dev->slot;
192 unsigned char pos2 = 0xff, pos3 = 0xff, pos4 = 0xff, pos5 = 0xff;
193 int i, rc;
194 int adapter = mca_dev->index;
195 int tbase = 0;
196 int tirq = 0;
197 int base_addr = ultra_io[ultra_found];
198 int irq = ultra_irq[ultra_found];
199
200 if (base_addr || irq) {
201 printk(KERN_INFO "Probing for SMC MCA adapter");
202 if (base_addr) {
203 printk(KERN_INFO " at I/O address 0x%04x%c",
204 base_addr, irq ? ' ' : '\n');
205 }
206 if (irq) {
207 printk(KERN_INFO "using irq %d\n", irq);
208 }
209 }
210
211 tirq = 0;
212 tbase = 0;
213
214 /* If we're trying to match a specificied irq or io address,
215 * we'll reject the adapter found unless it's the one we're
216 * looking for */
217
218 pos2 = mca_device_read_stored_pos(mca_dev, 2); /* io_addr */
219 pos3 = mca_device_read_stored_pos(mca_dev, 3); /* shared mem */
220 pos4 = mca_device_read_stored_pos(mca_dev, 4); /* ROM bios addr range */
221 pos5 = mca_device_read_stored_pos(mca_dev, 5); /* irq, media and RIPL */
222
223 /* Test the following conditions:
224 * - If an irq parameter is supplied, compare it
225 * with the irq of the adapter we found
226 * - If a base_addr paramater is given, compare it
227 * with the base_addr of the adapter we found
228 * - Check that the irq and the base_addr of the
229 * adapter we found is not already in use by
230 * this driver
231 */
232
233 switch (mca_dev->index) {
234 case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
235 case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
236 case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
237 case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
238 {
239 tbase = addr_table[(pos2 & 0xf0) >> 4].base_addr;
240 tirq = irq_table[(pos5 & 0xc) >> 2].new_irq;
241 break;
242 }
243 case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
244 case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
245 case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
246 case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
247 {
248 tbase = ((pos2 & 0x0fe) * 0x10);
249 tirq = irq_table[(pos5 & 3)].old_irq;
250 break;
251 }
252 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400253
254 if(!tirq || !tbase
255 || (irq && irq != tirq)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256 || (base_addr && tbase != base_addr))
257 /* FIXME: we're trying to force the ordering of the
258 * devices here, there should be a way of getting this
259 * to happen */
260 return -ENXIO;
261
262 /* Adapter found. */
263 dev = alloc_ei_netdev();
264 if(!dev)
265 return -ENODEV;
266
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267 SET_NETDEV_DEV(dev, gen_dev);
268 mca_device_set_name(mca_dev, smc_mca_adapter_names[adapter]);
269 mca_device_set_claim(mca_dev, 1);
270
271 printk(KERN_INFO "smc_mca: %s found in slot %d\n",
272 smc_mca_adapter_names[adapter], slot + 1);
273
274 ultra_found++;
275
276 dev->base_addr = ioaddr = mca_device_transform_ioport(mca_dev, tbase);
277 dev->irq = mca_device_transform_irq(mca_dev, tirq);
278 dev->mem_start = 0;
279 num_pages = 40;
280
281 switch (adapter) { /* card-# in const array above [hs] */
282 case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
283 case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
284 {
285 for (i = 0; i < 16; i++) { /* taking 16 counts
286 * up to 15 [hs] */
287 if (mem_table[i].mem_index == (pos3 & ~MEM_MASK)) {
288 dev->mem_start = (unsigned long)
289 mca_device_transform_memory(mca_dev, (void *)mem_table[i].mem_start);
290 num_pages = mem_table[i].num_pages;
291 }
292 }
293 break;
294 }
295 case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
296 case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
297 case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
298 case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
299 {
300 dev->mem_start = (unsigned long)
301 mca_device_transform_memory(mca_dev, (void *)((pos3 & 0xfc) * 0x1000));
302 num_pages = 0x40;
303 break;
304 }
305 case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
306 case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
307 {
308 /* courtesy of gamera@quartz.ocn.ne.jp, pos3 indicates
309 * the index of the 0x2000 step.
310 * beware different number of pages [hs]
311 */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400312 dev->mem_start = (unsigned long)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313 mca_device_transform_memory(mca_dev, (void *)(0xc0000 + (0x2000 * (pos3 & 0xf))));
314 num_pages = 0x20 + (2 * (pos3 & 0x10));
315 break;
316 }
317 }
318
319 /* sanity check, shouldn't happen */
320 if (dev->mem_start == 0) {
321 rc = -ENODEV;
322 goto err_unclaim;
323 }
324
325 if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) {
326 rc = -ENODEV;
327 goto err_unclaim;
328 }
329
330 reg4 = inb(ioaddr + 4) & 0x7f;
331 outb(reg4, ioaddr + 4);
332
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333 for (i = 0; i < 6; i++)
Joe Perches0795af52007-10-03 17:59:30 -0700334 dev->dev_addr[i] = inb(ioaddr + 8 + i);
335
Johannes Berge1749612008-10-27 15:59:26 -0700336 printk(KERN_INFO "smc_mca[%d]: Parameters: %#3x, %pM",
337 slot + 1, ioaddr, dev->dev_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700338
339 /* Switch from the station address to the alternate register set
340 * and read the useful registers there.
341 */
342
343 outb(0x80 | reg4, ioaddr + 4);
344
345 /* Enable FINE16 mode to avoid BIOS ROM width mismatches @ reboot.
346 */
347
348 outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
349
350 /* Switch back to the station address register set so that
351 * the MS-DOS driver can find the card after a warm boot.
352 */
353
354 outb(reg4, ioaddr + 4);
355
356 gen_dev->driver_data = dev;
357
358 /* The 8390 isn't at the base address, so fake the offset
359 */
360
361 dev->base_addr = ioaddr + ULTRA_NIC_OFFSET;
362
363 ei_status.name = "SMC Ultra MCA";
364 ei_status.word16 = 1;
365 ei_status.tx_start_page = START_PG;
366 ei_status.rx_start_page = START_PG + TX_PAGES;
367 ei_status.stop_page = num_pages;
368
369 ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG) * 256);
370 if (!ei_status.mem) {
371 rc = -ENOMEM;
372 goto err_release_region;
373 }
374
375 dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG) * 256;
376
377 printk(", IRQ %d memory %#lx-%#lx.\n",
378 dev->irq, dev->mem_start, dev->mem_end - 1);
379
380 ei_status.reset_8390 = &ultramca_reset_8390;
381 ei_status.block_input = &ultramca_block_input;
382 ei_status.block_output = &ultramca_block_output;
383 ei_status.get_8390_hdr = &ultramca_get_8390_hdr;
384
385 ei_status.priv = slot;
386
387 dev->open = &ultramca_open;
388 dev->stop = &ultramca_close_card;
389#ifdef CONFIG_NET_POLL_CONTROLLER
390 dev->poll_controller = ei_poll;
391#endif
392
393 NS8390_init(dev, 0);
394
395 rc = register_netdev(dev);
396 if (rc)
397 goto err_unmap;
398
399 return 0;
400
401err_unmap:
402 iounmap(ei_status.mem);
403err_release_region:
404 release_region(ioaddr, ULTRA_IO_EXTENT);
405err_unclaim:
406 mca_device_set_claim(mca_dev, 0);
407 free_netdev(dev);
408 return rc;
409}
410
411static int ultramca_open(struct net_device *dev)
412{
413 int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
414 int retval;
415
416 if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
417 return retval;
418
419 outb(ULTRA_MEMENB, ioaddr); /* Enable memory */
420 outb(0x80, ioaddr + 5); /* ??? */
421 outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */
422 outb(0x04, ioaddr + 5); /* ??? */
423
424 /* Set the early receive warning level in window 0 high enough not
425 * to receive ERW interrupts.
426 */
427
428 /* outb_p(E8390_NODMA + E8390_PAGE0, dev->base_addr);
429 * outb(0xff, dev->base_addr + EN0_ERWCNT);
430 */
431
432 ei_open(dev);
433 return 0;
434}
435
436static void ultramca_reset_8390(struct net_device *dev)
437{
438 int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
439
440 outb(ULTRA_RESET, ioaddr);
441 if (ei_debug > 1)
442 printk("resetting Ultra, t=%ld...", jiffies);
443 ei_status.txing = 0;
444
445 outb(0x80, ioaddr + 5); /* ??? */
446 outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */
447
448 if (ei_debug > 1)
449 printk("reset done\n");
450 return;
451}
452
453/* Grab the 8390 specific header. Similar to the block_input routine, but
454 * we don't need to be concerned with ring wrap as the header will be at
455 * the start of a page, so we optimize accordingly.
456 */
457
458static void ultramca_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
459{
460 void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG) << 8);
461
462#ifdef notdef
463 /* Officially this is what we are doing, but the readl() is faster */
464 memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
465#else
466 ((unsigned int*)hdr)[0] = readl(hdr_start);
467#endif
468}
469
470/* Block input and output are easy on shared memory ethercards, the only
471 * complication is when the ring buffer wraps.
472 */
473
474static void ultramca_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
475{
476 void __iomem *xfer_start = ei_status.mem + ring_offset - START_PG * 256;
477
478 if (ring_offset + count > ei_status.stop_page * 256) {
479 /* We must wrap the input move. */
480 int semi_count = ei_status.stop_page * 256 - ring_offset;
481 memcpy_fromio(skb->data, xfer_start, semi_count);
482 count -= semi_count;
483 memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
484 } else {
Al Viro4ec03112007-02-09 16:38:30 +0000485 memcpy_fromio(skb->data, xfer_start, count);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700486 }
487
488}
489
490static void ultramca_block_output(struct net_device *dev, int count, const unsigned char *buf,
491 int start_page)
492{
493 void __iomem *shmem = ei_status.mem + ((start_page - START_PG) << 8);
494
495 memcpy_toio(shmem, buf, count);
496}
497
498static int ultramca_close_card(struct net_device *dev)
499{
500 int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
501
502 netif_stop_queue(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400503
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504 if (ei_debug > 1)
505 printk("%s: Shutting down ethercard.\n", dev->name);
506
507 outb(0x00, ioaddr + 6); /* Disable interrupts. */
508 free_irq(dev->irq, dev);
509
510 NS8390_init(dev, 0);
511 /* We should someday disable shared memory and change to 8-bit mode
512 * "just in case"...
513 */
514
515 return 0;
516}
517
518static int ultramca_remove(struct device *gen_dev)
519{
520 struct mca_device *mca_dev = to_mca_device(gen_dev);
521 struct net_device *dev = (struct net_device *)gen_dev->driver_data;
522
523 if (dev) {
524 /* NB: ultra_close_card() does free_irq */
525 int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET;
526
527 unregister_netdev(dev);
528 mca_device_set_claim(mca_dev, 0);
529 release_region(ioaddr, ULTRA_IO_EXTENT);
530 iounmap(ei_status.mem);
531 free_netdev(dev);
532 }
533 return 0;
534}
535
536
537static struct mca_driver ultra_driver = {
538 .id_table = smc_mca_adapter_ids,
539 .driver = {
540 .name = "smc-mca",
541 .bus = &mca_bus_type,
542 .probe = ultramca_probe,
543 .remove = ultramca_remove,
544 }
545};
546
547static int __init ultramca_init_module(void)
548{
549 if(!MCA_bus)
550 return -ENXIO;
551
552 mca_register_driver(&ultra_driver);
553
554 return ultra_found ? 0 : -ENXIO;
555}
556
557static void __exit ultramca_cleanup_module(void)
558{
559 mca_unregister_driver(&ultra_driver);
560}
561module_init(ultramca_init_module);
562module_exit(ultramca_cleanup_module);
563