arch/arm/boot/dts/dove.dtsi

/include/ "skeleton.dtsi"

/ {
	compatible = "marvell,dove";
	model = "Marvell Armada 88AP510 SoC";

	interrupt-parent = <&intc>;

	intc: interrupt-controller {
		compatible = "marvell,orion-intc";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0xf1020204 0x04>,
		      <0xf1020214 0x04>;
	};

	mbus@f1000000 {
		compatible = "simple-bus";
		ranges = <0 0xf1000000 0x4000000>;
		#address-cells = <1>;
		#size-cells = <1>;

		uart0: serial@12000 {
			compatible = "ns16550a";
			reg = <0x12000 0x100>;
			reg-shift = <2>;
			interrupts = <7>;
			clock-frequency = <166666667>;
			status = "disabled";
		};

		uart1: serial@12100 {
			compatible = "ns16550a";
			reg = <0x12100 0x100>;
			reg-shift = <2>;
			interrupts = <8>;
			clock-frequency = <166666667>;
			status = "disabled";
		};

		uart2: serial@12200 {
			compatible = "ns16550a";
			reg = <0x12000 0x100>;
			reg-shift = <2>;
			interrupts = <9>;
			clock-frequency = <166666667>;
			status = "disabled";
		};

		uart3: serial@12300 {
			compatible = "ns16550a";
			reg = <0x12100 0x100>;
			reg-shift = <2>;
			interrupts = <10>;
			clock-frequency = <166666667>;
			status = "disabled";
		};

		wdt: wdt@20300 {
			compatible = "marvell,orion-wdt";
			reg = <0x20300 0x28>;
		};

		gpio0: gpio@d0400 {
			compatible = "marvell,orion-gpio";
			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xd0400 0x20>;
			ngpio = <32>;
			interrupts = <12>, <13>, <14>, <60>;
		};

		gpio1: gpio@d0420 {
			compatible = "marvell,orion-gpio";
			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xd0420 0x20>;
			ngpio = <32>;
			interrupts = <61>;
		};

		gpio2: gpio@e8400 {
			compatible = "marvell,orion-gpio";
			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xe8400 0x0c>;
			ngpio = <8>;
		};

		spi0: spi@10600 {
			compatible = "marvell,orion-spi";
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			interrupts = <6>;
			reg = <0x10600 0x28>;
			status = "disabled";
		};

		spi1: spi@14600 {
			compatible = "marvell,orion-spi";
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			interrupts = <5>;
			reg = <0x14600 0x28>;
			status = "disabled";
		};

		i2c0: i2c@11000 {
			compatible = "marvell,mv64xxx-i2c";
			reg = <0x11000 0x20>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <11>;
			clock-frequency = <400000>;
			timeout-ms = <1000>;
			status = "disabled";
		};

		sdio0: sdio@92000 {
			compatible = "marvell,dove-sdhci";
			reg = <0x92000 0x100>;
			interrupts = <35>, <37>;
			status = "disabled";
		};

		sdio1: sdio@90000 {
			compatible = "marvell,dove-sdhci";
			reg = <0x90000 0x100>;
			interrupts = <36>, <38>;
			status = "disabled";
		};

		sata0: sata@a0000 {
			compatible = "marvell,orion-sata";
			reg = <0xa0000 0x2400>;
			interrupts = <62>;
			nr-ports = <1>;
			status = "disabled";
		};
	};
};