| Sebastian Hesselbarth | 80a8b54 | 2012-08-15 19:07:34 +0200 | [diff] [blame] | 1 | /include/ "skeleton.dtsi" |
| 2 | |
| 3 | / { |
| 4 | compatible = "marvell,dove"; |
| 5 | model = "Marvell Armada 88AP510 SoC"; |
| 6 | |
| 7 | interrupt-parent = <&intc>; |
| 8 | |
| 9 | intc: interrupt-controller { |
| 10 | compatible = "marvell,orion-intc"; |
| 11 | interrupt-controller; |
| 12 | #interrupt-cells = <1>; |
| 13 | reg = <0xf1020204 0x04>, |
| 14 | <0xf1020214 0x04>; |
| 15 | }; |
| 16 | |
| 17 | mbus@f1000000 { |
| 18 | compatible = "simple-bus"; |
| 19 | ranges = <0 0xf1000000 0x4000000>; |
| 20 | #address-cells = <1>; |
| 21 | #size-cells = <1>; |
| 22 | |
| 23 | uart0: serial@12000 { |
| 24 | compatible = "ns16550a"; |
| 25 | reg = <0x12000 0x100>; |
| 26 | reg-shift = <2>; |
| 27 | interrupts = <7>; |
| 28 | clock-frequency = <166666667>; |
| 29 | status = "disabled"; |
| 30 | }; |
| 31 | |
| 32 | uart1: serial@12100 { |
| 33 | compatible = "ns16550a"; |
| 34 | reg = <0x12100 0x100>; |
| 35 | reg-shift = <2>; |
| 36 | interrupts = <8>; |
| 37 | clock-frequency = <166666667>; |
| 38 | status = "disabled"; |
| 39 | }; |
| 40 | |
| 41 | uart2: serial@12200 { |
| 42 | compatible = "ns16550a"; |
| 43 | reg = <0x12000 0x100>; |
| 44 | reg-shift = <2>; |
| 45 | interrupts = <9>; |
| 46 | clock-frequency = <166666667>; |
| 47 | status = "disabled"; |
| 48 | }; |
| 49 | |
| 50 | uart3: serial@12300 { |
| 51 | compatible = "ns16550a"; |
| 52 | reg = <0x12100 0x100>; |
| 53 | reg-shift = <2>; |
| 54 | interrupts = <10>; |
| 55 | clock-frequency = <166666667>; |
| 56 | status = "disabled"; |
| 57 | }; |
| 58 | |
| 59 | wdt: wdt@20300 { |
| 60 | compatible = "marvell,orion-wdt"; |
| 61 | reg = <0x20300 0x28>; |
| 62 | }; |
| 63 | |
| 64 | gpio0: gpio@d0400 { |
| 65 | compatible = "marvell,orion-gpio"; |
| 66 | #gpio-cells = <2>; |
| 67 | gpio-controller; |
| 68 | reg = <0xd0400 0x20>; |
| 69 | ngpio = <32>; |
| 70 | interrupts = <12>, <13>, <14>, <60>; |
| 71 | }; |
| 72 | |
| 73 | gpio1: gpio@d0420 { |
| 74 | compatible = "marvell,orion-gpio"; |
| 75 | #gpio-cells = <2>; |
| 76 | gpio-controller; |
| 77 | reg = <0xd0420 0x20>; |
| 78 | ngpio = <32>; |
| 79 | interrupts = <61>; |
| 80 | }; |
| 81 | |
| 82 | gpio2: gpio@e8400 { |
| 83 | compatible = "marvell,orion-gpio"; |
| 84 | #gpio-cells = <2>; |
| 85 | gpio-controller; |
| 86 | reg = <0xe8400 0x0c>; |
| 87 | ngpio = <8>; |
| 88 | }; |
| 89 | |
| 90 | spi0: spi@10600 { |
| 91 | compatible = "marvell,orion-spi"; |
| 92 | #address-cells = <1>; |
| 93 | #size-cells = <0>; |
| 94 | cell-index = <0>; |
| 95 | interrupts = <6>; |
| 96 | reg = <0x10600 0x28>; |
| 97 | status = "disabled"; |
| 98 | }; |
| 99 | |
| 100 | spi1: spi@14600 { |
| 101 | compatible = "marvell,orion-spi"; |
| 102 | #address-cells = <1>; |
| 103 | #size-cells = <0>; |
| 104 | cell-index = <1>; |
| 105 | interrupts = <5>; |
| 106 | reg = <0x14600 0x28>; |
| 107 | status = "disabled"; |
| 108 | }; |
| 109 | |
| 110 | i2c0: i2c@11000 { |
| 111 | compatible = "marvell,mv64xxx-i2c"; |
| 112 | reg = <0x11000 0x20>; |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <0>; |
| 115 | interrupts = <11>; |
| 116 | clock-frequency = <400000>; |
| 117 | timeout-ms = <1000>; |
| 118 | status = "disabled"; |
| 119 | }; |
| 120 | |
| 121 | sdio0: sdio@92000 { |
| 122 | compatible = "marvell,dove-sdhci"; |
| 123 | reg = <0x92000 0x100>; |
| 124 | interrupts = <35>, <37>; |
| 125 | status = "disabled"; |
| 126 | }; |
| 127 | |
| 128 | sdio1: sdio@90000 { |
| 129 | compatible = "marvell,dove-sdhci"; |
| 130 | reg = <0x90000 0x100>; |
| 131 | interrupts = <36>, <38>; |
| 132 | status = "disabled"; |
| 133 | }; |
| 134 | |
| 135 | sata0: sata@a0000 { |
| 136 | compatible = "marvell,orion-sata"; |
| 137 | reg = <0xa0000 0x2400>; |
| 138 | interrupts = <62>; |
| 139 | nr-ports = <1>; |
| 140 | status = "disabled"; |
| 141 | }; |
| 142 | }; |
| 143 | }; |