Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking update from David Miller:
1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
timestamp offset. From Andrey Vagin.
2) VMWARE VM VSOCK layer, from Andy King.
3) Much improved support for virtual functions and SR-IOV in bnx2x,
from Ariel ELior.
4) All protocols on ipv4 and ipv6 are now network namespace aware, and
all the compatability checks for initial-namespace-only protocols is
removed. Thanks to Tom Parkin for helping deal with the last major
holdout, L2TP.
5) IPV6 support in netpoll and network namespace support in pktgen,
from Cong Wang.
6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
Protocol (MVRP) support, from David Ward.
7) Compute packet lengths more accurately in the packet scheduler, from
Eric Dumazet.
8) Use per-task page fragment allocator in skb_append_datato_frags(),
also from Eric Dumazet.
9) Add support for connection tracking labels in netfilter, from
Florian Westphal.
10) Fix default multicast group joining on ipv6, and add anti-spoofing
checks to 6to4 and 6rd. From Hannes Frederic Sowa.
11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
times, rearrange inet frag datastructures for better cacheline
locality, and move more operations outside of locking. From Jesper
Dangaard Brouer.
12) Instead of strict master <--> slave relationships, allow arbitrary
scenerios with "upper device lists". From Jiri Pirko.
13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
Pirko.
14) Add a BPF filter netfilter match target, from Willem de Bruijn.
15) Orphan and delete a bunch of pre-historic networking drivers from
Paul Gortmaker.
16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although
this still needs some minor bug fixing before it's %100 correct in
all cases.
17) Handle unresolved IPSEC states like ARP, with a resolution packet
queue. From Steffen Klassert.
18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
Hemminger. This was long overdue.
19) Support SO_REUSEPORT, from Tom Herbert.
20) Allow locking a socket BPF filter, so that it cannot change after a
process drops capabilities.
21) Add VLAN filtering to bridge, from Vlad Yasevich.
22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
the ipv6 routes, from YOSHIFUJI Hideaki.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
ipv6: fix race condition regarding dst->expires and dst->from.
net: fix a wrong assignment in skb_split()
ip_gre: remove an extra dst_release()
ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
atl1c: restore buffer state
net: fix a build failure when !CONFIG_PROC_FS
net: ipv4: fix waring -Wunused-variable
net: proc: fix build failed when procfs is not configured
Revert "xen: netback: remove redundant xenvif_put"
net: move procfs code to net/core/net-procfs.c
qmi_wwan, cdc-ether: add ADU960S
bonding: set sysfs device_type to 'bond'
bonding: fix bond_release_all inconsistencies
b44: use netdev_alloc_skb_ip_align()
xen: netback: remove redundant xenvif_put
net: fec: Do a sanity check on the gpio number
ip_gre: propogate target device GSO capability to the tunnel device
ip_gre: allow CSUM capable devices to handle packets
bonding: Fix initialize after use for 3ad machine state spinlock
bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
...
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
new file mode 100644
index 0000000..0adeb52
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -0,0 +1,62 @@
+What: /sys/devices/cpu/events/
+ /sys/devices/cpu/events/branch-misses
+ /sys/devices/cpu/events/cache-references
+ /sys/devices/cpu/events/cache-misses
+ /sys/devices/cpu/events/stalled-cycles-frontend
+ /sys/devices/cpu/events/branch-instructions
+ /sys/devices/cpu/events/stalled-cycles-backend
+ /sys/devices/cpu/events/instructions
+ /sys/devices/cpu/events/cpu-cycles
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description: Generic performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by many/most CPUs. These events can be monitored
+ using the 'perf(1)' tool.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit and the number '0xNNNN' shows the
+ "raw code" for the perf event identified by the file's
+ "basename".
+
+
+What: /sys/devices/cpu/events/PM_LD_MISS_L1
+ /sys/devices/cpu/events/PM_LD_REF_L1
+ /sys/devices/cpu/events/PM_CYC
+ /sys/devices/cpu/events/PM_BRU_FIN
+ /sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+ /sys/devices/cpu/events/PM_BRU_MPRED
+ /sys/devices/cpu/events/PM_INST_CMPL
+ /sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+ Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description: POWER-systems specific performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by the POWER CPU. These events can be monitored
+ using the 'perf(1)' tool.
+
+ These events may not be supported by other CPUs.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit and the number '0xNNNN' shows the
+ "raw code" for the perf event identified by the file's
+ "basename".
+
+ Further, multiple terms like 'event=0xNNNN' can be specified
+ and separated with comma. All available terms are defined in
+ the /sys/bus/event_source/devices/<dev>/format file.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
new file mode 100644
index 0000000..73b77a6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
@@ -0,0 +1,13 @@
+What: /sys/devices/.../power_resources_D0/
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../power_resources_D0/ directory is only
+ present for device objects representing ACPI device nodes that
+ use ACPI power resources for power management.
+
+ If present, it contains symbolic links to device directories
+ representing ACPI power resources that need to be turned on for
+ the given device node to be in ACPI power state D0. The names
+ of the links are the same as the names of the directories they
+ point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
new file mode 100644
index 0000000..30c2070
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
@@ -0,0 +1,14 @@
+What: /sys/devices/.../power_resources_D1/
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../power_resources_D1/ directory is only
+ present for device objects representing ACPI device nodes that
+ use ACPI power resources for power management and support ACPI
+ power state D1.
+
+ If present, it contains symbolic links to device directories
+ representing ACPI power resources that need to be turned on for
+ the given device node to be in ACPI power state D1. The names
+ of the links are the same as the names of the directories they
+ point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
new file mode 100644
index 0000000..fd9d84b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
@@ -0,0 +1,14 @@
+What: /sys/devices/.../power_resources_D2/
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../power_resources_D2/ directory is only
+ present for device objects representing ACPI device nodes that
+ use ACPI power resources for power management and support ACPI
+ power state D2.
+
+ If present, it contains symbolic links to device directories
+ representing ACPI power resources that need to be turned on for
+ the given device node to be in ACPI power state D2. The names
+ of the links are the same as the names of the directories they
+ point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
new file mode 100644
index 0000000..3df32c2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
@@ -0,0 +1,14 @@
+What: /sys/devices/.../power_resources_D3hot/
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../power_resources_D3hot/ directory is only
+ present for device objects representing ACPI device nodes that
+ use ACPI power resources for power management and support ACPI
+ power state D3hot.
+
+ If present, it contains symbolic links to device directories
+ representing ACPI power resources that need to be turned on for
+ the given device node to be in ACPI power state D3hot. The
+ names of the links are the same as the names of the directories
+ they point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_state b/Documentation/ABI/testing/sysfs-devices-power_state
new file mode 100644
index 0000000..7ad9546
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_state
@@ -0,0 +1,20 @@
+What: /sys/devices/.../power_state
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../power_state attribute is only present for
+ device objects representing ACPI device nodes that provide power
+ management methods.
+
+ If present, it contains a string representing the current ACPI
+ power state of the given device node. Its possible values,
+ "D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+ names defined by the ACPI specification (ACPI 4 and above).
+
+ If the device node uses shared ACPI power resources, this state
+ determines a list of power resources required not to be turned
+ off. However, some power resources needed by the device node in
+ higher-power (lower-number) states may also be ON because of
+ some other devices using them at the moment.
+
+ This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-real_power_state b/Documentation/ABI/testing/sysfs-devices-real_power_state
new file mode 100644
index 0000000..8b3527c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-real_power_state
@@ -0,0 +1,23 @@
+What: /sys/devices/.../real_power_state
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../real_power_state attribute is only present
+ for device objects representing ACPI device nodes that provide
+ power management methods and use ACPI power resources for power
+ management.
+
+ If present, it contains a string representing the real ACPI
+ power state of the given device node as returned by the _PSC
+ control method or inferred from the configuration of power
+ resources. Its possible values, "D0", "D1", "D2", "D3hot", and
+ "D3cold", reflect the power state names defined by the ACPI
+ specification (ACPI 4 and above).
+
+ In some situations the value of this attribute may be different
+ from the value of the /sys/devices/.../power_state attribute for
+ the same device object. If that happens, some shared power
+ resources used by the device node are only ON because of some
+ other devices using them at the moment.
+
+ This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-resource_in_use b/Documentation/ABI/testing/sysfs-devices-resource_in_use
new file mode 100644
index 0000000..b4a3bc5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-resource_in_use
@@ -0,0 +1,12 @@
+What: /sys/devices/.../resource_in_use
+Date: January 2013
+Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+ The /sys/devices/.../resource_in_use attribute is only present
+ for device objects representing ACPI power resources.
+
+ If present, it contains a number (0 or 1) representing the
+ current status of the given power resource (0 means that the
+ resource is not in use and therefore it has been turned off).
+
+ This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-platform-ts5500 b/Documentation/ABI/testing/sysfs-platform-ts5500
new file mode 100644
index 0000000..c88375a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-ts5500
@@ -0,0 +1,47 @@
+What: /sys/devices/platform/ts5500/adc
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Indicates the presence of an A/D Converter. If it is present,
+ it will display "1", otherwise "0".
+
+What: /sys/devices/platform/ts5500/ereset
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Indicates the presence of an external reset. If it is present,
+ it will display "1", otherwise "0".
+
+What: /sys/devices/platform/ts5500/id
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Product ID of the TS board. TS-5500 ID is 0x60.
+
+What: /sys/devices/platform/ts5500/jumpers
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Bitfield showing the jumpers' state. If a jumper is present,
+ the corresponding bit is set. For instance, 0x0e means jumpers
+ 2, 3 and 4 are set.
+
+What: /sys/devices/platform/ts5500/rs485
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Indicates the presence of the RS485 option. If it is present,
+ it will display "1", otherwise "0".
+
+What: /sys/devices/platform/ts5500/sram
+Date: January 2013
+KernelVersion: 3.7
+Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+ Indicates the presence of the SRAM option. If it is present,
+ it will display "1", otherwise "0".
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 53e6fca..a091780 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -127,15 +127,42 @@
returns as soon as it finds any constraint that doesn't allow the
call to succeed.
-4.2.3 pci_disable_msi
+4.2.3 pci_enable_msi_block_auto
+
+int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
+
+This variation on pci_enable_msi() call allows a device driver to request
+the maximum possible number of MSIs. The MSI specification only allows
+interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
+
+If this function returns a positive number, it indicates that it has
+succeeded and the returned value is the number of allocated interrupts. In
+this case, the function enables MSI on this device and updates dev->irq to
+be the lowest of the new interrupts assigned to it. The other interrupts
+assigned to the device are in the range dev->irq to dev->irq + returned
+value - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+If the device driver needs to know the number of interrupts the device
+supports it can pass the pointer count where that number is stored. The
+device driver must decide what action to take if pci_enable_msi_block_auto()
+succeeds, but returns a value less than the number of interrupts supported.
+If the device driver does not need to know the number of interrupts
+supported, it can set the pointer count to NULL.
+
+4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block(). Calling it restores dev->irq to the pin-based
-interrupt number and frees the previously allocated message signaled
-interrupt(s). The interrupt may subsequently be assigned to another
-device, so drivers should not cache the value of dev->irq.
+pci_enable_msi_block() or pci_enable_msi_block_auto(). Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s). The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
Before calling this function, a device driver must always call free_irq()
on any interrupt for which it previously called request_irq().
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 54469bc..94a6561 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -63,8 +63,8 @@
Currently the kernel is not able to automatically determine from which ACPI
device it should make the corresponding platform device so we need to add
the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
-and I2C devices are created automatically as described below.
+drivers/acpi/acpi_platform.c. This limitation is only for the platform
+devices, SPI and I2C devices are created automatically as described below.
SPI serial bus support
~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/acpi/scan_handlers.txt b/Documentation/acpi/scan_handlers.txt
new file mode 100644
index 0000000..3246ccf
--- /dev/null
+++ b/Documentation/acpi/scan_handlers.txt
@@ -0,0 +1,77 @@
+ACPI Scan Handlers
+
+Copyright (C) 2012, Intel Corporation
+Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+During system initialization and ACPI-based device hot-add, the ACPI namespace
+is scanned in search of device objects that generally represent various pieces
+of hardware. This causes a struct acpi_device object to be created and
+registered with the driver core for every device object in the ACPI namespace
+and the hierarchy of those struct acpi_device objects reflects the namespace
+layout (i.e. parent device objects in the namespace are represented by parent
+struct acpi_device objects and analogously for their children). Those struct
+acpi_device objects are referred to as "device nodes" in what follows, but they
+should not be confused with struct device_node objects used by the Device Trees
+parsing code (although their role is analogous to the role of those objects).
+
+During ACPI-based device hot-remove device nodes representing pieces of hardware
+being removed are unregistered and deleted.
+
+The core ACPI namespace scanning code in drivers/acpi/scan.c carries out basic
+initialization of device nodes, such as retrieving common configuration
+information from the device objects represented by them and populating them with
+appropriate data, but some of them require additional handling after they have
+been registered. For example, if the given device node represents a PCI host
+bridge, its registration should cause the PCI bus under that bridge to be
+enumerated and PCI devices on that bus to be registered with the driver core.
+Similarly, if the device node represents a PCI interrupt link, it is necessary
+to configure that link so that the kernel can use it.
+
+Those additional configuration tasks usually depend on the type of the hardware
+component represented by the given device node which can be determined on the
+basis of the device node's hardware ID (HID). They are performed by objects
+called ACPI scan handlers represented by the following structure:
+
+struct acpi_scan_handler {
+ const struct acpi_device_id *ids;
+ struct list_head list_node;
+ int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
+ void (*detach)(struct acpi_device *dev);
+};
+
+where ids is the list of IDs of device nodes the given handler is supposed to
+take care of, list_node is the hook to the global list of ACPI scan handlers
+maintained by the ACPI core and the .attach() and .detach() callbacks are
+executed, respectively, after registration of new device nodes and before
+unregistration of device nodes the handler attached to previously.
+
+The namespace scanning function, acpi_bus_scan(), first registers all of the
+device nodes in the given namespace scope with the driver core. Then, it tries
+to match a scan handler against each of them using the ids arrays of the
+available scan handlers. If a matching scan handler is found, its .attach()
+callback is executed for the given device node. If that callback returns 1,
+that means that the handler has claimed the device node and is now responsible
+for carrying out any additional configuration tasks related to it. It also will
+be responsible for preparing the device node for unregistration in that case.
+The device node's handler field is then populated with the address of the scan
+handler that has claimed it.
+
+If the .attach() callback returns 0, it means that the device node is not
+interesting to the given scan handler and may be matched against the next scan
+handler in the list. If it returns a (negative) error code, that means that
+the namespace scan should be terminated due to a serious error. The error code
+returned should then reflect the type of the error.
+
+The namespace trimming function, acpi_bus_trim(), first executes .detach()
+callbacks from the scan handlers of all device nodes in the given namespace
+scope (if they have scan handlers). Next, it unregisters all of the device
+nodes in that scope.
+
+ACPI scan handlers can be added to the list maintained by the ACPI core with the
+help of the acpi_scan_add_handler() function taking a pointer to the new scan
+handler as an argument. The order in which scan handlers are added to the list
+is the order in which they are matched against device nodes during namespace
+scans.
+
+All scan handles must be added to the list before acpi_bus_scan() is run for the
+first time and they cannot be removed from it.
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
index d758702..5f583af 100644
--- a/Documentation/arm64/memory.txt
+++ b/Documentation/arm64/memory.txt
@@ -35,6 +35,8 @@
ffffffbe00000000 ffffffbffbbfffff ~8GB [guard, future vmmemap]
+ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk device
+
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O space
ffffffbbffff0000 ffffffbcffffffff ~2MB [guard]
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 27f2b21..d9ca5be 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -253,6 +253,8 @@
the given new value. It returns the old value that the atomic variable v had
just before the operation.
+atomic_xchg requires explicit memory barriers around the operation.
+
int atomic_cmpxchg(atomic_t *v, int old, int new);
This performs an atomic compare exchange operation on the atomic value v,
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
index f78b90a..f5635a0 100644
--- a/Documentation/cgroups/00-INDEX
+++ b/Documentation/cgroups/00-INDEX
@@ -4,8 +4,6 @@
- Description for Block IO Controller, implementation and usage details.
cgroups.txt
- Control Groups definition, implementation details, examples and API.
-cgroup_event_listener.c
- - A user program for cgroup listener.
cpuacct.txt
- CPU Accounting Controller; account CPU usage for groups of tasks.
cpusets.txt
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
deleted file mode 100644
index 3e082f9..0000000
--- a/Documentation/cgroups/cgroup_event_listener.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * cgroup_event_listener.c - Simple listener of cgroup events
- *
- * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
- */
-
-#include <assert.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <libgen.h>
-#include <limits.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#include <sys/eventfd.h>
-
-#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>\n"
-
-int main(int argc, char **argv)
-{
- int efd = -1;
- int cfd = -1;
- int event_control = -1;
- char event_control_path[PATH_MAX];
- char line[LINE_MAX];
- int ret;
-
- if (argc != 3) {
- fputs(USAGE_STR, stderr);
- return 1;
- }
-
- cfd = open(argv[1], O_RDONLY);
- if (cfd == -1) {
- fprintf(stderr, "Cannot open %s: %s\n", argv[1],
- strerror(errno));
- goto out;
- }
-
- ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
- dirname(argv[1]));
- if (ret >= PATH_MAX) {
- fputs("Path to cgroup.event_control is too long\n", stderr);
- goto out;
- }
-
- event_control = open(event_control_path, O_WRONLY);
- if (event_control == -1) {
- fprintf(stderr, "Cannot open %s: %s\n", event_control_path,
- strerror(errno));
- goto out;
- }
-
- efd = eventfd(0, 0);
- if (efd == -1) {
- perror("eventfd() failed");
- goto out;
- }
-
- ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
- if (ret >= LINE_MAX) {
- fputs("Arguments string is too long\n", stderr);
- goto out;
- }
-
- ret = write(event_control, line, strlen(line) + 1);
- if (ret == -1) {
- perror("Cannot write to cgroup.event_control");
- goto out;
- }
-
- while (1) {
- uint64_t result;
-
- ret = read(efd, &result, sizeof(result));
- if (ret == -1) {
- if (errno == EINTR)
- continue;
- perror("Cannot read from eventfd");
- break;
- }
- assert(ret == sizeof(result));
-
- ret = access(event_control_path, W_OK);
- if ((ret == -1) && (errno == ENOENT)) {
- puts("The cgroup seems to have removed.");
- ret = 0;
- break;
- }
-
- if (ret == -1) {
- perror("cgroup.event_control "
- "is not accessible any more");
- break;
- }
-
- printf("%s %s: crossed\n", argv[1], argv[2]);
- }
-
-out:
- if (efd >= 0)
- close(efd);
- if (event_control >= 0)
- close(event_control);
- if (cfd >= 0)
- close(cfd);
-
- return (ret != 0);
-}
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index fc8fa97..ce94a83 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -399,8 +399,7 @@
9.10 Memory thresholds
Memory controller implements memory thresholds using cgroups notification
- API. You can use Documentation/cgroups/cgroup_event_listener.c to test
- it.
+ API. You can use tools/cgroup/cgroup_event_listener.c to test it.
(Shell-A) Create cgroup and run event listener
# mkdir /cgroup/A
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index c436096..72f70b1 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -111,6 +111,12 @@
For setting some of these values, the frequency table helpers might be
helpful. See the section 2 for more information on them.
+SMP systems normally have same clock source for a group of cpus. For these the
+.init() would be called only once for the first online cpu. Here the .init()
+routine must initialize policy->cpus with mask of all possible cpus (Online +
+Offline) that share the clock. Then the core would copy this mask onto
+policy->related_cpus and will reset policy->cpus to carry only online cpus.
+
1.3 verify
------------
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 04f6b32..ff2f283 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -190,11 +190,11 @@
first set scaling_max_freq, then
scaling_min_freq.
-affected_cpus : List of CPUs that require software coordination
- of frequency.
+affected_cpus : List of Online CPUs that require software
+ coordination of frequency.
-related_cpus : List of CPUs that need some sort of frequency
- coordination, whether software or hardware.
+related_cpus : List of Online + Offline CPUs that need software
+ coordination of frequency.
scaling_driver : Hardware driver for cpufreq.
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
index 19078bf..ad03121 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -4,7 +4,7 @@
- compatible: Should be "atmel,<chip>-aic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 62eb8df..3dfb0c0 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -42,7 +42,7 @@
Optional
- interrupts : Interrupt source of the parent interrupt controller on
- secondary GICs, or VGIC maintainance interrupt on primary GIC (see
+ secondary GICs, or VGIC maintenance interrupt on primary GIC (see
below).
- cpu-offset : per-cpu offset within the distributor and cpu interface
@@ -74,7 +74,7 @@
virtual interface control register base and size. The 2nd additional
region is the GIC virtual cpu interface register base and size.
-- interrupts : VGIC maintainance interrupt.
+- interrupts : VGIC maintenance interrupt.
Example:
diff --git a/Documentation/devicetree/bindings/arm/kirkwood.txt b/Documentation/devicetree/bindings/arm/kirkwood.txt
new file mode 100644
index 0000000..98cce9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/kirkwood.txt
@@ -0,0 +1,27 @@
+Marvell Kirkwood Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwood
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,kirkwood";
+
+In order to support the kirkwood cpufreq driver, there must be a node
+cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
+where the "powersave" clock is a gating clock used to switch the CPU
+between the "cpu_clk" and the "ddrclk".
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-88SV131";
+ clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+ clock-names = "cpu_clk", "ddrclk", "powersave";
+ };
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index d0051a7..f8288ea 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -39,16 +39,16 @@
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
-- OMAP4 SDP : Software Developement Board
+- OMAP4 SDP : Software Development Board
compatible = "ti,omap4-sdp", "ti,omap4430"
- OMAP4 PandaBoard : Low cost community board
compatible = "ti,omap4-panda", "ti,omap4430"
-- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x
+- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
compatible = "ti,omap3-evm", "ti,omap3"
-- AM335X EVM : Software Developement Board for AM335x
+- AM335X EVM : Software Development Board for AM335x
compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
- AM335X Bone : Low cost community board
diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
new file mode 100644
index 0000000..433afe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/psci.txt
@@ -0,0 +1,55 @@
+* Power State Coordination Interface (PSCI)
+
+Firmware implementing the PSCI functions described in ARM document number
+ARM DEN 0022A ("Power State Coordination Interface System Software on ARM
+processors") can be used by Linux to initiate various CPU-centric power
+operations.
+
+Issue A of the specification describes functions for CPU suspend, hotplug
+and migration of secure software.
+
+Functions are invoked by trapping to the privilege level of the PSCI
+firmware (specified as part of the binding below) and passing arguments
+in a manner similar to that specified by AAPCS:
+
+ r0 => 32-bit Function ID / return value
+ {r1 - r3} => Parameters
+
+Note that the immediate field of the trapping instruction must be set
+to #0.
+
+
+Main node required properties:
+
+ - compatible : Must be "arm,psci"
+
+ - method : The method of calling the PSCI firmware. Permitted
+ values are:
+
+ "smc" : SMC #0, with the register assignments specified
+ in this binding.
+
+ "hvc" : HVC #0, with the register assignments specified
+ in this binding.
+
+Main node optional properties:
+
+ - cpu_suspend : Function ID for CPU_SUSPEND operation
+
+ - cpu_off : Function ID for CPU_OFF operation
+
+ - cpu_on : Function ID for CPU_ON operation
+
+ - migrate : Function ID for MIGRATE operation
+
+
+Example:
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x95c10000>;
+ cpu_off = <0x95c10001>;
+ cpu_on = <0x95c10002>;
+ migrate = <0x95c10003>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
new file mode 100644
index 0000000..5016979
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/prima2-clock.txt
@@ -0,0 +1,73 @@
+* Clock bindings for CSR SiRFprimaII
+
+Required properties:
+- compatible: Should be "sirf,prima2-clkc"
+- reg: Address and length of the register set
+- interrupts: Should contain clock controller interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of prima2
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ rtc 0
+ osc 1
+ pll1 2
+ pll2 3
+ pll3 4
+ mem 5
+ sys 6
+ security 7
+ dsp 8
+ gps 9
+ mf 10
+ io 11
+ cpu 12
+ uart0 13
+ uart1 14
+ uart2 15
+ tsc 16
+ i2c0 17
+ i2c1 18
+ spi0 19
+ spi1 20
+ pwmc 21
+ efuse 22
+ pulse 23
+ dmac0 24
+ dmac1 25
+ nand 26
+ audio 27
+ usp0 28
+ usp1 29
+ usp2 30
+ vip 31
+ gfx 32
+ mm 33
+ lcd 34
+ vpp 35
+ mmc01 36
+ mmc23 37
+ mmc45 38
+ usbpll 39
+ usb0 40
+ usb1 41
+
+Examples:
+
+clks: clock-controller@88000000 {
+ compatible = "sirf,prima2-clkc";
+ reg = <0x88000000 0x1000>;
+ interrupts = <3>;
+ #clock-cells = <1>;
+};
+
+i2c0: i2c@b00e0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+ clocks = <&clks 17>;
+};
diff --git a/Documentation/devicetree/bindings/drm/exynos/g2d.txt b/Documentation/devicetree/bindings/drm/exynos/g2d.txt
new file mode 100644
index 0000000..1eb124d
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/g2d.txt
@@ -0,0 +1,22 @@
+Samsung 2D Graphic Accelerator using DRM frame work
+
+Samsung FIMG2D is a graphics 2D accelerator which supports Bit Block Transfer.
+We set the drawing-context registers for configuring rendering parameters and
+then start rendering.
+This driver is for SOCs which contain G2D IPs with version 4.1.
+
+Required properties:
+ -compatible:
+ should be "samsung,exynos-g2d-41".
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+
+Example:
+ g2d {
+ compatible = "samsung,exynos-g2d-41";
+ reg = <0x10850000 0x1000>;
+ interrupts = <0 91 0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/ina209.txt b/Documentation/devicetree/bindings/i2c/ina209.txt
new file mode 100644
index 0000000..9dd2bee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ina209.txt
@@ -0,0 +1,18 @@
+ina209 properties
+
+Required properties:
+- compatible: Must be "ti,ina209"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+temp-sensor@4c {
+ compatible = "ti,ina209";
+ reg = <0x4c>;
+ shunt-resistor = <5000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/max6697.txt b/Documentation/devicetree/bindings/i2c/max6697.txt
new file mode 100644
index 0000000..5f79399
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/max6697.txt
@@ -0,0 +1,64 @@
+max6697 properties
+
+Required properties:
+- compatible:
+ Should be one of
+ maxim,max6581
+ maxim,max6602
+ maxim,max6622
+ maxim,max6636
+ maxim,max6689
+ maxim,max6693
+ maxim,max6694
+ maxim,max6697
+ maxim,max6698
+ maxim,max6699
+- reg: I2C address
+
+Optional properties:
+
+- smbus-timeout-disable
+ Set to disable SMBus timeout. If not specified, SMBus timeout will be
+ enabled.
+- extended-range-enable
+ Only valid for MAX6581. Set to enable extended temperature range.
+ Extended temperature will be disabled if not specified.
+- beta-compensation-enable
+ Only valid for MAX6693 and MX6694. Set to enable beta compensation on
+ remote temperature channel 1.
+ Beta compensation will be disabled if not specified.
+- alert-mask
+ Alert bit mask. Alert disabled for bits set.
+ Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+ If not specified, alert will be enabled for all channels.
+- over-temperature-mask
+ Over-temperature bit mask. Over-temperature reporting disabled for
+ bits set.
+ Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+ If not specified, over-temperature reporting will be enabled for all
+ channels.
+- resistance-cancellation
+ Boolean for all chips other than MAX6581. Set to enable resistance
+ cancellation on remote temperature channel 1.
+ For MAX6581, resistance cancellation enabled for all channels if
+ specified as boolean, otherwise as per bit mask specified.
+ Only supported for remote temperatures (bit 1..7).
+ If not specified, resistance cancellation will be disabled for all
+ channels.
+- transistor-ideality
+ For MAX6581 only. Two values; first is bit mask, second is ideality
+ select value as per MAX6581 data sheet. Select bit 1..7 for remote
+ channels.
+ Transistor ideality will be initialized to default (1.008) if not
+ specified.
+
+Example:
+
+temp-sensor@1a {
+ compatible = "maxim,max6697";
+ reg = <0x1a>;
+ smbus-timeout-disable;
+ resistance-cancellation;
+ alert-mask = <0x72>;
+ over-temperature-mask = <0x7f>;
+};
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.txt b/Documentation/devicetree/bindings/input/imx-keypad.txt
new file mode 100644
index 0000000..2ebaf7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/imx-keypad.txt
@@ -0,0 +1,53 @@
+* Freescale i.MX Keypad Port(KPP) device tree bindings
+
+The KPP is designed to interface with a keypad matrix with 2-point contact
+or 3-point contact keys. The KPP is designed to simplify the software task
+of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+and decoding one or multiple keys pressed simultaneously on a keypad.
+
+Required SoC Specific Properties:
+- compatible: Should be "fsl,<soc>-kpp".
+
+- reg: Physical base address of the KPP and length of memory mapped
+ region.
+
+- interrupts: The KPP interrupt number to the CPU(s).
+
+- clocks: The clock provided by the SoC to the KPP. Some SoCs use dummy
+clock(The clock for the KPP is provided by the SoCs automatically).
+
+Required Board Specific Properties:
+- pinctrl-names: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- pinctrl-0: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- linux,keymap: The definition can be found at
+bindings/input/matrix-keymap.txt.
+
+Example:
+kpp: kpp@73f94000 {
+ compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+ reg = <0x73f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <0x00000067 /* KEY_UP */
+ 0x0001006c /* KEY_DOWN */
+ 0x00020072 /* KEY_VOLUMEDOWN */
+ 0x00030066 /* KEY_HOME */
+ 0x0100006a /* KEY_RIGHT */
+ 0x01010069 /* KEY_LEFT */
+ 0x0102001c /* KEY_ENTER */
+ 0x01030073 /* KEY_VOLUMEUP */
+ 0x02000040 /* KEY_F6 */
+ 0x02010042 /* KEY_F8 */
+ 0x02020043 /* KEY_F9 */
+ 0x02030044 /* KEY_F10 */
+ 0x0300003b /* KEY_F1 */
+ 0x0301003c /* KEY_F2 */
+ 0x0302003d /* KEY_F3 */
+ 0x03030074>; /* KEY_POWER */
+};
diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
index 31afd50..bcf62f8 100644
--- a/Documentation/devicetree/bindings/input/lpc32xx-key.txt
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@@ -1,19 +1,22 @@
NXP LPC32xx Key Scan Interface
+This binding is based on the matrix-keymap binding with the following
+changes:
+
Required Properties:
- compatible: Should be "nxp,lpc3220-key"
- reg: Physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number to the cpu.
-- keypad,num-rows: Number of rows and columns, e.g. 1: 1x1, 6: 6x6
-- keypad,num-columns: Must be equal to keypad,num-rows since LPC32xx only
- supports square matrices
- nxp,debounce-delay-ms: Debounce delay in ms
- nxp,scan-delay-ms: Repeated scan period in ms
- linux,keymap: the key-code to be reported when the key is pressed
and released, see also
Documentation/devicetree/bindings/input/matrix-keymap.txt
+Note: keypad,num-rows and keypad,num-columns are required, and must be equal
+since LPC32xx only supports square matrices
+
Example:
key@40050000 {
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt
index 3cd8b98..c54919f 100644
--- a/Documentation/devicetree/bindings/input/matrix-keymap.txt
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt
@@ -9,6 +9,12 @@
row << 24 | column << 16 | key-code
Optional properties:
+Properties for the number of rows and columns are optional because some
+drivers will use fixed values for these.
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+- keypad,num-columns: Number of column lines connected to the keypad
+ controller.
+
Some users of this binding might choose to specify secondary keymaps for
cases where there is a modifier key such as a Fn key. Proposed names
for said properties are "linux,fn-keymap" or with another descriptive
@@ -17,3 +23,5 @@
Example:
linux,keymap = < 0x00030012
0x0102003a >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <8>;
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 72683be..2995fae 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -1,7 +1,18 @@
* Tegra keyboard controller
+The key controller has maximum 24 pins to make matrix keypad. Any pin
+can be configured as row or column. The maximum column pin can be 8
+and maximum row pins can be 16 for Tegra20/Tegra30.
Required properties:
- compatible: "nvidia,tegra20-kbc"
+- reg: Register base address of KBC.
+- interrupts: Interrupt number for the KBC.
+- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an
+ array of pin numbers which is used as rows.
+- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
+ array of pin numbers which is used as column.
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
Optional properties, in addition to those specified by the shared
matrix-keyboard bindings:
@@ -19,5 +30,16 @@
keyboard: keyboard {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
+ interrupts = <0 85 0x04>;
nvidia,ghost-filter;
+ nvidia,debounce-delay-ms = <640>;
+ nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
+ nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
+ linux,keymap = <0x00000074
+ 0x00010067
+ 0x00020066
+ 0x01010068
+ 0x02000069
+ 0x02010070
+ 0x02020071>;
};
diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt
index f2fa5e1..34ed1c6 100644
--- a/Documentation/devicetree/bindings/input/omap-keypad.txt
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@@ -6,19 +6,16 @@
The keypad controller can sense a key-press and key-release and report the
event using a interrupt to the cpu.
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
Required SoC Specific Properties:
- compatible: should be one of the following
- "ti,omap4-keypad": For controllers compatible with omap4 keypad
controller.
-Required Board Specific Properties, in addition to those specified by
-the shared matrix-keyboard bindings:
-- keypad,num-rows: Number of row lines connected to the keypad
- controller.
-
-- keypad,num-columns: Number of column lines connected to the
- keypad controller.
-
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
index 2a1538f..2551850 100644
--- a/Documentation/devicetree/bindings/input/tca8418_keypad.txt
+++ b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
@@ -1,8 +1,10 @@
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
Required properties:
- compatible: "ti,tca8418"
- reg: the I2C address
- interrupts: IRQ line number, should trigger on falling edge
-- keypad,num-rows: The number of rows
-- keypad,num-columns: The number of columns
- linux,keymap: Keys definitions, see keypad-matrix.
diff --git a/Documentation/devicetree/bindings/gpio/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
similarity index 100%
rename from Documentation/devicetree/bindings/gpio/leds-ns2.txt
rename to Documentation/devicetree/bindings/leds/leds-ns2.txt
diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100755
index 0000000..8fffa3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the
+ given device need to be present. The definition for each of these nodes
+ is defined using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+ These entries are required if regulators are enabled for a device.
+ Missing of these properties can cause the regulator registration
+ fails.
+ If some of input supply is powered through battery or always-on
+ supply then also it is require to have these parameters with proper
+ node handle of always on power supply.
+ tps6507x:
+ vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+ vindcdc3-supply : VDCDC3 input.
+ vldo1_2-supply : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+ 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+ 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps6507x@48 {
+ compatible = "ti,tps6507x";
+ reg = <0x48>;
+
+ vindcdc1_2-supply = <&vbat>;
+ vindcdc3-supply = <...>;
+ vinldo1_2-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdcdc1_reg: regulator@0 {
+ regulator-compatible = "VDCDC1";
+ reg = <0>;
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdcdc2_reg: regulator@1 {
+ regulator-compatible = "VDCDC2";
+ reg = <1>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ vdcdc3_reg: regulator@2 {
+ regulator-compatible = "VDCDC3";
+ reg = <2>;
+ regulator-min-microvolt = <950000>
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ ldo1_reg: regulator@3 {
+ regulator-compatible = "LDO1";
+ reg = <3>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2_reg: regulator@4 {
+ regulator-compatible = "LDO2";
+ reg = <4>;
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ };
diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
index cb4291e..a5bdff4 100644
--- a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
+++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
@@ -1,7 +1,7 @@
* DMA Engine.
The Octeon DMA Engine transfers between the Boot Bus and main memory.
-The DMA Engine will be refered to by phandle by any device that is
+The DMA Engine will be referred to by phandle by any device that is
connected to it.
Properties:
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 7927689..6d1c098 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -4,18 +4,18 @@
The Synopsis designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsis dw mshc controller properties described
-by synposis-dw-mshc.txt and the properties used by the Samsung Exynos specific
+by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific
extensions to the Synopsis Designware Mobile Storage Host Controller.
Required Properties:
* compatible: should be
- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
- specific extentions.
+ specific extensions.
- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
- specific extentions.
+ specific extensions.
- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
- specific extentions.
+ specific extensions.
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
index 97e9e31..3b3a1ee 100644
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -55,5 +55,5 @@
};
Note: This example shows both SoC specific and board specific properties
- in a single device node. The properties can be actually be seperated
+ in a single device node. The properties can be actually be separated
into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
new file mode 100644
index 0000000..dff0e5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -0,0 +1,60 @@
+* Allwinner A1X Pin Controller
+
+The pins controlled by sunXi pin controller are organized in banks,
+each bank has 32 pins. Each pin has 7 multiplexing functions, with
+the first two functions being GPIO in and out. The configuration on
+the pins includes drive strength and pull-up.
+
+Required properties:
+- compatible: "allwinner,<soc>-pinctrl". Supported SoCs for now are:
+ sun5i-a13.
+- reg: Should contain the register physical address and length for the
+ pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+A pinctrl node should contain at least one subnodes representing the
+pinctrl groups available on the machine. Each subnode will list the
+pins it needs, and how they should be configured, with regard to muxer
+configuration, drive strength and pullups. If one of these options is
+not set, its actual value will be unspecified.
+
+Required subnode-properties:
+
+- allwinner,pins: List of strings containing the pin name.
+- allwinner,function: Function to mux the pins listed above to.
+
+Optional subnode-properties:
+- allwinner,drive: Integer. Represents the current sent to the pin
+ 0: 10 mA
+ 1: 20 mA
+ 2: 30 mA
+ 3: 40 mA
+- allwinner,pull: Integer.
+ 0: No resistor
+ 1: Pull-up resistor
+ 2: Pull-down resistor
+
+Examples:
+
+pinctrl@01c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
new file mode 100644
index 0000000..e204d00
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
@@ -0,0 +1,120 @@
+NVIDIA Tegra114 pinmux controller
+
+The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
+pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
+nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
+a baseline, and only documents the differences between the two bindings.
+
+Required properties:
+- compatible: "nvidia,tegra114-pinmux"
+- reg: Should contain the register physical address and length for each of
+ the pad control and mux registers. The first bank of address must be the
+ driver strength pad control register address and second bank address must
+ be pinmux register address.
+
+Tegra114 adds the following optional properties for pin configuration subnodes:
+- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
+- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
+- nvidia,lock: Integer. Lock the pin configuration against further changes
+ until reset. 0: no, 1: yes.
+- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
+- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
+- nvidia,drive-type: Integer. Valid range 0...3.
+
+As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
+which groups support which functionality.
+
+Valid values for pin and group names are:
+
+ per-pin mux groups:
+
+ These all support nvidia,function, nvidia,tristate, nvidia,pull,
+ nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
+ nvidia,io-reset and nvidia,rcv-sel.
+
+ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
+ ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
+ ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
+ dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+ sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
+ sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
+ ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+ uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
+ uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
+ gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
+ clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+ gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
+ gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
+ gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
+ gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+ gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
+ gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
+ gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
+ gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+ sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+ sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
+ pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
+ kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
+ kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
+ kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+ kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
+ cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+ dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
+ dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+ gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
+ gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
+ sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+ sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+ gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
+ sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
+
+ drive groups:
+
+ These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
+ nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
+ support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
+ and nvidia,drive-type.
+
+ ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
+ dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
+ gmh, owr, uda.
+
+Example:
+
+ pinmux: pinmux {
+ compatible = "nvidia,tegra114-pinmux";
+ reg = <0x70000868 0x148 /* Pad control registers */
+ 0x70003000 0x40c>; /* PinMux registers */
+ };
+
+Example board file extract:
+
+ pinctrl {
+ sdmmc4_default: pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+
+ sdhci@78000400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc4_default>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
new file mode 100644
index 0000000..9a2f3f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -0,0 +1,140 @@
+ST Ericsson Nomadik pinmux controller
+
+Required properties:
+- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540",
+ "stericsson,nmk-pinctrl-stn8815"
+- reg: Should contain the register physical address and length of the PRCMU.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as input, output, pull up, pull down...
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- ste,pins : An array of strings. Each string contains the name of a pin or
+ group.
+
+Optional subnode-properties:
+- ste,function: A string containing the name of the function to mux to the
+ pin or group.
+
+- ste,config: Handle of pin configuration node (e.g. ste,config = <&slpm_in_wkup_pdis>)
+
+- ste,input : <0/1/2>
+ 0: input with no pull
+ 1: input with pull up,
+ 2: input with pull down,
+
+- ste,output: <0/1/2>
+ 0: output low,
+ 1: output high,
+ 2: output (value is not specified).
+
+- ste,sleep: <0/1>
+ 0: sleep mode disable,
+ 1: sleep mode enable.
+
+- ste,sleep-input: <0/1/2/3>
+ 0: sleep input with no pull,
+ 1: sleep input with pull up,
+ 2: sleep input with pull down.
+ 3: sleep input and keep last input configuration (no pull, pull up or pull down).
+
+- ste,sleep-output: <0/1/2>
+ 0: sleep output low,
+ 1: sleep output high,
+ 2: sleep output (value is not specified).
+
+- ste,sleep-gpio: <0/1>
+ 0: disable sleep gpio mode,
+ 1: enable sleep gpio mode.
+
+- ste,sleep-wakeup: <0/1>
+ 0: wake-up detection enabled,
+ 1: wake-up detection disabled.
+
+- ste,sleep-pull-disable: <0/1>
+ 0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
+ 1: GPIO pull-up and pull-down resistor are disabled.
+
+Example board file extract:
+
+ pinctrl@80157000 {
+ compatible = "stericsson,nmk-pinctrl";
+ reg = <0x80157000 0x2000>;
+
+ pinctrl-names = "default";
+
+ slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-input = <3>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <1>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <2>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ u0_default_mux {
+ ste,function = "u0";
+ ste,pins = "u0_a_1";
+ };
+ };
+ uart0_default_mode: uart0_default {
+ uart0_default_cfg1 {
+ ste,pins = "GPIO0", "GPIO2";
+ ste,input = <1>;
+ };
+
+ uart0_default_cfg2 {
+ ste,pins = "GPIO1", "GPIO3";
+ ste,output = <1>;
+ };
+ };
+ uart0_sleep_mode: uart0_sleep {
+ uart0_sleep_cfg1 {
+ ste,pins = "GPIO0", "GPIO2";
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ uart0_sleep_cfg2 {
+ ste,pins = "GPIO1";
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ uart0_sleep_cfg3 {
+ ste,pins = "GPIO3";
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+ };
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
+ };
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
new file mode 100644
index 0000000..9a599d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -0,0 +1,13 @@
+* QNAP Power Off
+
+QNAP NAS devices have a microcontroller controlling the main power
+supply. This microcontroller is connected to UART1 of the Kirkwood and
+Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
+microcontroller to turn the power off. This driver adds a handler to
+pm_power_off which is called to turn the power off.
+
+Required Properties:
+- compatible: Should be "qnap,power-off"
+
+- reg: Address and length of the register set for UART1
+- clocks: tclk clock
diff --git a/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt b/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt
new file mode 100644
index 0000000..5776e68
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt
@@ -0,0 +1,8 @@
+* Restart Power Off
+
+Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off
+by restarting and letting u-boot keep hold of the machine until the
+user presses a button.
+
+Required Properties:
+- compatible: Should be "restart-poweroff"
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
index b039bcb..07abf0f 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -8,9 +8,9 @@
Definition: Must include "fsl,srio" for IP blocks with IP Block
Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
- Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
+ Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
version in IP Block Revision Register and Y is Minor version. If this
- compatiable is provided it should be ordered before "fsl,srio".
+ compatible is provided it should be ordered before "fsl,srio".
- reg
Usage: required
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 357758c..758eae2 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -9,6 +9,11 @@
- anatop-min-voltage: Minimum voltage of this regulator
- anatop-max-voltage: Maximum voltage of this regulator
+Optional properties:
+- anatop-delay-reg-offset: Anatop MFD step time register offset
+- anatop-delay-bit-shift: Bit shift for the step time register
+- anatop-delay-bit-width: Number of bits used in the step time register
+
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -23,6 +28,9 @@
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1300000>;
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
new file mode 100644
index 0000000..a35ff99
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -0,0 +1,152 @@
+* Samsung S5M8767 Voltage and Current Regulator
+
+The Samsung S5M8767 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of s5m8767.
+
+Required properties:
+- compatible: Should be "samsung,s5m8767-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s5m8767 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for 'irq1' interrupt.
+ - Second interrupt specifier is for 'alert' interrupt.
+- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of s5m8767 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+The above regulator entries are defined in regulator bindings documentation
+except op_mode description.
+ - op_mode: describes the different operating modes of the LDO's with
+ power mode change in SOC. The different possible values are,
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
+The following are the names of the regulators that the s5m8767 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s5m8767.
+
+ - LDOn
+ - valid values for n are 1 to 28
+ - Example: LDO0, LD01, LDO28
+ - BUCKn
+ - valid values for n are 1 to 9.
+ - Example: BUCK1, BUCK2, BUCK9
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+ s5m8767,pmic-buck3-uses-gpio-dvs;
+ s5m8767,pmic-buck4-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
+ <&gpx0 1 1 0 0>, /* DVS2 */
+ <&gpx0 2 1 0 0>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
+ <&gpx2 4 1 0 0>, /* SET2 */
+ <&gpx2 5 1 0 0>; /* SET3 */
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
new file mode 100644
index 0000000..2f7e44a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
@@ -0,0 +1,27 @@
+TPS51632 Voltage regulators
+
+Required properties:
+- compatible: Must be "ti,tps51632"
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
+- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
+ will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
+ step is 10mV as per datasheet.
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+ tps51632 {
+ compatible = "ti,tps51632";
+ reg = <0x43>;
+ regulator-name = "tps51632-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,enable-pwm-dvfs;
+ ti,dvfs-step-20mV;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
index c8ca6b8..1b20c3d 100644
--- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
@@ -17,9 +17,9 @@
- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
If this property is missing, then assume that there is no GPIO
for vsel1 control.
-- ti,vsel0-state-high: Inital state of vsel0 input is high.
+- ti,vsel0-state-high: Initial state of vsel0 input is high.
If this property is missing, then assume the state as low (0).
-- ti,vsel1-state-high: Inital state of vsel1 input is high.
+- ti,vsel1-state-high: Initial state of vsel1 input is high.
If this property is missing, then assume the state as low (0).
Any property defined as part of the core regulator binding, defined in
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index 90ec45f..7ac7259 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -7,7 +7,7 @@
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: Two interrupt numbers to the cpu should be specified. First
- interrupt number is the rtc alarm interupt and second interrupt number
+ interrupt number is the rtc alarm interrupt and second interrupt number
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
new file mode 100644
index 0000000..e622210
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -0,0 +1,12 @@
+Renesas MSIOF spi controller
+
+Required properties:
+- compatible : "renesas,sh-msiof" for SuperH or
+ "renesas,sh-mobile-msiof" for SH Mobile series
+- reg : Offset and length of the register set for the device
+- interrupts : interrupt line used by MSIOF
+
+Optional properties:
+- num-cs : total number of chip-selects
+- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
+- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 902b1b1..19e1ef73 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -14,6 +14,7 @@
brcm Broadcom Corporation
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
+cirrus Cirrus Logic, Inc.
cortina Cortina Systems, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
denx Denx Software Engineering
@@ -42,6 +43,7 @@
qcom Qualcomm, Inc.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
+renesas Renesas Electronics Corporation
samsung Samsung Semiconductor
sbs Smart Battery System
schindler Schindler
@@ -50,8 +52,10 @@
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
st STMicroelectronics
+ste ST-Ericsson
stericsson ST-Ericsson
ti Texas Instruments
+toshiba Toshiba Corporation
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 79ead82..ce0d8e7 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -2,7 +2,7 @@
The Samsung's Watchdog controller is used for resuming system operation
after a preset amount of time during which the WDT reset event has not
-occured.
+occurred.
Required properties:
- compatible : should be "samsung,s3c2410-wdt"
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 3374c08..fec5a9b 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -66,6 +66,7 @@
i5 3470T 91
32nm Core i3/i5/i7 Processors
+ i7 2600 98
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
i3 330E, 370M/350/330 90 rPGA, 105 BGA
@@ -79,7 +80,10 @@
P4505/P4500 90
32nm Atom Processors
+ S1260/1220 95
+ S1240 102
Z2460 90
+ Z2760 90
D2700/2550/2500 100
N2850/2800/2650/2600 100
@@ -98,6 +102,7 @@
45nm Atom Processors
D525/510/425/410 100
+ K525/510/425/410 100
Z670/650 90
Z560/550/540/530P/530/520PT/520/515/510PT/510P 90
Z510/500 90
@@ -107,7 +112,11 @@
330/230 125
E680/660/640/620 90
E680T/660T/640T/620T 110
+ E665C/645C 90
+ E665CT/645CT 110
CE4170/4150/4110 110
+ CE4200 series unknown
+ CE5300 series unknown
45nm Core2 Processors
Solo ULV SU3500/3300 100
diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209
new file mode 100644
index 0000000..672501d
--- /dev/null
+++ b/Documentation/hwmon/ina209
@@ -0,0 +1,93 @@
+Kernel driver ina209
+=====================
+
+Supported chips:
+ * Burr-Brown / Texas Instruments INA209
+ Prefix: 'ina209'
+ Addresses scanned: -
+ Datasheet:
+ http://www.ti.com/lit/gpn/ina209
+
+Author: Paul Hays <Paul.Hays@cattail.ca>
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side
+of a D.C. power supply. It can perform measurements and calculations in the
+background to supply readings at any time. It includes a programmable
+calibration multiplier to scale the displayed current and power values.
+
+
+Sysfs entries
+-------------
+
+The INA209 chip is highly configurable both via hardwiring and via
+the I2C bus. See the datasheet for details.
+
+This tries to expose most monitoring features of the hardware via
+sysfs. It does not support every feature of this chip.
+
+
+in0_input shunt voltage (mV)
+in0_input_highest shunt voltage historical maximum reading (mV)
+in0_input_lowest shunt voltage historical minimum reading (mV)
+in0_reset_history reset shunt voltage history
+in0_max shunt voltage max alarm limit (mV)
+in0_min shunt voltage min alarm limit (mV)
+in0_crit_max shunt voltage crit max alarm limit (mV)
+in0_crit_min shunt voltage crit min alarm limit (mV)
+in0_max_alarm shunt voltage max alarm limit exceeded
+in0_min_alarm shunt voltage min alarm limit exceeded
+in0_crit_max_alarm shunt voltage crit max alarm limit exceeded
+in0_crit_min_alarm shunt voltage crit min alarm limit exceeded
+
+in1_input bus voltage (mV)
+in1_input_highest bus voltage historical maximum reading (mV)
+in1_input_lowest bus voltage historical minimum reading (mV)
+in1_reset_history reset bus voltage history
+in1_max bus voltage max alarm limit (mV)
+in1_min bus voltage min alarm limit (mV)
+in1_crit_max bus voltage crit max alarm limit (mV)
+in1_crit_min bus voltage crit min alarm limit (mV)
+in1_max_alarm bus voltage max alarm limit exceeded
+in1_min_alarm bus voltage min alarm limit exceeded
+in1_crit_max_alarm bus voltage crit max alarm limit exceeded
+in1_crit_min_alarm bus voltage crit min alarm limit exceeded
+
+power1_input power measurement (uW)
+power1_input_highest power historical maximum reading (uW)
+power1_reset_history reset power history
+power1_max power max alarm limit (uW)
+power1_crit power crit alarm limit (uW)
+power1_max_alarm power max alarm limit exceeded
+power1_crit_alarm power crit alarm limit exceeded
+
+curr1_input current measurement (mA)
+
+update_interval data conversion time; affects number of samples used
+ to average results for shunt and bus voltages.
+
+General Remarks
+---------------
+
+The power and current registers in this chip require that the calibration
+register is programmed correctly before they are used. Normally this is expected
+to be done in the BIOS. In the absence of BIOS programming, the shunt resistor
+voltage can be provided using platform data. The driver uses platform data from
+the ina2xx driver for this purpose. If calibration register data is not provided
+via platform data, the driver checks if the calibration register has been
+programmed (ie has a value not equal to zero). If so, this value is retained.
+Otherwise, a default value reflecting a shunt resistor value of 10 mOhm is
+programmed into the calibration register.
+
+
+Output Pins
+-----------
+
+Output pin programming is a board feature which depends on the BIOS. It is
+outside the scope of a hardware monitoring driver to enable or disable output
+pins.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8386aad..c263740 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -30,6 +30,14 @@
Prefix: 'it8728'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
+ * IT8771E
+ Prefix: 'it8771'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
+ * IT8772E
+ Prefix: 'it8772'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* IT8782F
Prefix: 'it8782'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -83,8 +91,8 @@
-----------
This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F,
-IT8783E/F, and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, IT8772E,
+IT8782F, IT8783E/F, and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -118,8 +126,8 @@
for AMD power sequencing. Therefore the chip will appear as IT8716F
to userspace applications.
-The IT8728F is considered compatible with the IT8721F, until a datasheet
-becomes available (hopefully.)
+The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
+until a datasheet becomes available (hopefully.)
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 66ecb9f..1650771 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -17,12 +17,13 @@
* Maxim MAX6604
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
- * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+ * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
* NXP Semiconductors SE97, SE97B, SE98, SE98A
Datasheets:
http://www.nxp.com/documents/data_sheet/SE97.pdf
diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73
new file mode 100644
index 0000000..8af059d
--- /dev/null
+++ b/Documentation/hwmon/lm73
@@ -0,0 +1,90 @@
+Kernel driver lm73
+==================
+
+Supported chips:
+ * Texas Instruments LM73
+ Prefix: 'lm73'
+ Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/product/lm73
+
+Author: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+Documentation: Chris Verges <kg4ysn@gmail.com>
+
+
+Description
+-----------
+
+The LM73 is a digital temperature sensor. All temperature values are
+given in degrees Celsius.
+
+Measurement Resolution Support
+------------------------------
+
+The LM73 supports four resolutions, defined in terms of degrees C per
+LSB: 0.25, 0.125, 0.0625, and 0.3125. Changing the resolution mode
+affects the conversion time of the LM73's analog-to-digital converter.
+From userspace, the desired resolution can be specified as a function of
+conversion time via the 'update_interval' sysfs attribute for the
+device. This attribute will normalize ranges of input values to the
+maximum times defined for the resolution in the datasheet.
+
+ Resolution Conv. Time Input Range
+ (C/LSB) (msec) (msec)
+ --------------------------------------
+ 0.25 14 0..14
+ 0.125 28 15..28
+ 0.0625 56 29..56
+ 0.03125 112 57..infinity
+ --------------------------------------
+
+The following examples show how the 'update_interval' attribute can be
+used to change the conversion time:
+
+ $ echo 0 > update_interval
+ $ cat update_interval
+ 14
+ $ cat temp1_input
+ 24250
+
+ $ echo 22 > update_interval
+ $ cat update_interval
+ 28
+ $ cat temp1_input
+ 24125
+
+ $ echo 56 > update_interval
+ $ cat update_interval
+ 56
+ $ cat temp1_input
+ 24062
+
+ $ echo 85 > update_interval
+ $ cat update_interval
+ 112
+ $ cat temp1_input
+ 24031
+
+As shown here, the lm73 driver automatically adjusts any user input for
+'update_interval' via a step function. Reading back the
+'update_interval' value after a write operation will confirm the
+conversion time actively in use.
+
+Mathematically, the resolution can be derived from the conversion time
+via the following function:
+
+ g(x) = 0.250 * [log(x/14) / log(2)]
+
+where 'x' is the output from 'update_interval' and 'g(x)' is the
+resolution in degrees C per LSB.
+
+Alarm Support
+-------------
+
+The LM73 features a simple over-temperature alarm mechanism. This
+feature is exposed via the sysfs attributes.
+
+The attributes 'temp1_max_alarm' and 'temp1_min_alarm' are flags
+provided by the LM73 that indicate whether the measured temperature has
+passed the 'temp1_max' and 'temp1_min' thresholds, respectively. These
+values _must_ be read to clear the registers on the LM73.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 0448222..47651ff 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -16,6 +16,16 @@
Prefixes: 'max34446'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
+ * Maxim MAX34460
+ PMBus 12-Channel Voltage Monitor & Sequencer
+ Prefix: 'max34460'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf
+ * Maxim MAX34461
+ PMBus 16-Channel Voltage Monitor & Sequencer
+ Prefix: 'max34461'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
@@ -26,6 +36,9 @@
This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
+It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & Sequencers.
+The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage
+channels.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -109,3 +122,6 @@
temp7 and temp8 attributes only exist for MAX34440.
MAX34446 only supports temp[1-3].
+
+MAX34460 supports attribute groups in[1-12] and temp[1-5].
+MAX34461 supports attribute groups in[1-16] and temp[1-5].
diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697
new file mode 100644
index 0000000..6594177
--- /dev/null
+++ b/Documentation/hwmon/max6697
@@ -0,0 +1,58 @@
+Kernel driver max6697
+=====================
+
+Supported chips:
+ * Maxim MAX6581
+ Prefix: 'max6581'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
+ * Maxim MAX6602
+ Prefix: 'max6602'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf
+ * Maxim MAX6622
+ Prefix: 'max6622'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf
+ * Maxim MAX6636
+ Prefix: 'max6636'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf
+ * Maxim MAX6689
+ Prefix: 'max6689'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf
+ * Maxim MAX6693
+ Prefix: 'max6693'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf
+ * Maxim MAX6694
+ Prefix: 'max6694'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf
+ * Maxim MAX6697
+ Prefix: 'max6697'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
+ * Maxim MAX6698
+ Prefix: 'max6698'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf
+ * Maxim MAX6699
+ Prefix: 'max6699'
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf
+
+Author:
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for several MAX6697 compatible temperature sensor
+chips. The chips support one local temperature sensor plus four, six, or seven
+remote temperature sensors. Remote temperature sensors are diode-connected
+thermal transitors, except for MAX6698 which supports three diode-connected
+thermal transistors plus three thermistors in addition to the local temperature
+sensor.
+
+The driver provides the following sysfs attributes. temp1 is the local (chip)
+temperature, temp[2..n] are remote temperatures. The actually supported
+per-channel attributes are chip type and channel dependent.
+
+tempX_input RO temperature
+tempX_max RW temperature maximum threshold
+tempX_max_alarm RO temperature maximum threshold alarm
+tempX_crit RW temperature critical threshold
+tempX_crit_alarm RO temperature critical threshold alarm
+tempX_fault RO temperature diode fault (remote sensors only)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 1f4dd85..79f8257 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -722,14 +722,14 @@
What to do if a value is found to be invalid, depends on the type of the
sysfs attribute that is being set. If it is a continuous setting like a
tempX_max or inX_max attribute, then the value should be clamped to its
-limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not
-continuous like for example a tempX_type, then when an invalid value is
-written, -EINVAL should be returned.
+limits using clamp_val(value, min_limit, max_limit). If it is not continuous
+like for example a tempX_type, then when an invalid value is written,
+-EINVAL should be returned.
Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):
long v = simple_strtol(buf, NULL, 10) / 1000;
- v = SENSORS_LIMIT(v, -128, 127);
+ v = clamp_val(v, -128, 127);
/* write v to register */
Example2, fan divider setting, valid values 2, 4 and 8:
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index a995b41..3d924b6 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -121,12 +121,26 @@
in1_lcrit_alarm Input voltage critical low alarm.
in1_crit_alarm Input voltage critical high alarm.
-in2_label "vout1"
-in2_input Measured output voltage.
-in2_lcrit Critical minimum output Voltage.
-in2_crit Critical maximum output voltage.
-in2_lcrit_alarm Critical output voltage critical low alarm.
-in2_crit_alarm Critical output voltage critical high alarm.
+in2_label "vmon"
+in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M,
+ ZL9117M) pin. Reported voltage is 16x the voltage on the
+ pin (adjusted internally by the chip).
+in2_lcrit Critical minumum VMON/VDRV Voltage.
+in2_crit Critical maximum VMON/VDRV voltage.
+in2_lcrit_alarm VMON/VDRV voltage critical low alarm.
+in2_crit_alarm VMON/VDRV voltage critical high alarm.
+
+ vmon attributes are supported on ZL2004, ZL9101M,
+ and ZL9117M only.
+
+inX_label "vout1"
+inX_input Measured output voltage.
+inX_lcrit Critical minimum output Voltage.
+inX_crit Critical maximum output voltage.
+inX_lcrit_alarm Critical output voltage critical low alarm.
+inX_crit_alarm Critical output voltage critical high alarm.
+
+ X is 3 for ZL2004, ZL9101M, and ZL9117M, 2 otherwise.
curr1_label "iout1"
curr1_input Measured output current.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 14c3f4f..5198b74 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1186,6 +1186,29 @@
clean-files += *.dtb
DTC_FLAGS ?= -p 1024
+ dtc_cpp
+ This is just like dtc as describe above, except that the C pre-
+ processor is invoked upon the .dtsp file before compiling the result
+ with dtc.
+
+ In order for build dependencies to work, all files compiled using
+ dtc_cpp must use the C pre-processor's #include functionality and not
+ dtc's /include/ functionality.
+
+ Using the C pre-processor allows use of #define to create named
+ constants. In turn, the #defines will typically appear in a header
+ file, which may be shared with regular C code. Since the dtc language
+ represents a data structure rather than code in C syntax, similar
+ restrictions are placed on a header file included by a device tree
+ file as for a header file included by an assembly language file.
+ In particular, the C pre-processor is passed -x assembler-with-cpp,
+ which sets macro __ASSEMBLY__. __DTS__ is also set. These allow header
+ files to restrict their content to that compatible with device tree
+ source.
+
+ A central rule exists to create $(obj)/%.dtb from $(src)/%.dtsp;
+ architecture Makefiles do no need to explicitly write out that rule.
+
--- 6.8 Custom kbuild commands
When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6c72381..4c5b3f9 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1039,16 +1039,11 @@
Claim all unknown PCI IDE storage controllers.
idle= [X86]
- Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
+ Format: idle=poll, idle=halt, idle=nomwait
Poll forces a polling idle loop that can slightly
improve the performance of waking up a idle CPU, but
will use a lot of power and make the system run hot.
Not recommended.
- idle=mwait: On systems which support MONITOR/MWAIT but
- the kernel chose to not use it because it doesn't save
- as much power as a normal idle loop, use the
- MONITOR/MWAIT idle loop anyways. Performance should be
- the same as idle=poll.
idle=halt: Halt is forced to be used for CPU idle.
In such case C2/C3 won't be used again.
idle=nomwait: Disable mwait for CPU C-states
@@ -1131,6 +1126,11 @@
0 disables intel_idle and fall back on acpi_idle.
1 to 6 specify maximum depth of C-state.
+ intel_pstate= [X86]
+ disable
+ Do not enable intel_pstate as the default
+ scaling driver for the supported processors
+
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
off disable Interrupt Remapping
@@ -1886,10 +1886,6 @@
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.
- no-hlt [BUGS=X86-32] Tells the kernel that the hlt
- instruction doesn't work correctly and not to
- use it.
-
no_file_caps Tells the kernel not to honor file capabilities. The
only way then for a file to be executed with privilege
is to be setuid root or executed by root.
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 3c4e1b3..fa5d8a9 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1685,6 +1685,7 @@
xchg();
cmpxchg();
+ atomic_xchg();
atomic_cmpxchg();
atomic_inc_return();
atomic_dec_return();
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index da40efb..a2b57e0 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -972,6 +972,18 @@
Pin control requests from drivers
=================================
+When a device driver is about to probe the device core will automatically
+attempt to issue pinctrl_get_select_default() on these devices.
+This way driver writers do not need to add any of the boilerplate code
+of the type found below. However when doing fine-grained state selection
+and not using the "default" state, you may have to do some device driver
+handling of the pinctrl handles and states.
+
+So if you just want to put the pins for a certain device into the default
+state and be done with it, there is nothing you need to do besides
+providing the proper mapping table. The device core will take care of
+the rest.
+
Generally it is discouraged to let individual drivers get and enable pin
control. So if possible, handle the pin control in platform code or some other
place where you have access to all the affected struct device * pointers. In
@@ -1097,9 +1109,9 @@
mux in and bias pins in a certain way before the GPIO subsystems starts to
deal with them.
-The above can be hidden: using pinctrl hogs, the pin control driver may be
-setting up the config and muxing for the pins when it is probing,
-nevertheless orthogonal to the GPIO subsystem.
+The above can be hidden: using the device core, the pinctrl core may be
+setting up the config and muxing for the pins right before the device is
+probing, nevertheless orthogonal to the GPIO subsystem.
But there are also situations where it makes sense for the GPIO subsystem
to communicate directly with with the pinctrl subsystem, using the latter
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 6ec291e..85894d8 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -223,3 +223,8 @@
only after the entire suspend/hibernation sequence is complete.
So, to summarize, use [un]lock_system_sleep() instead of directly using
mutex_[un]lock(&pm_mutex). That would prevent freezing failures.
+
+V. Miscellaneous
+/sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
+all user space processes or all freezable kernel threads, in unit of millisecond.
+The default value is 20000, with range of unsigned integer.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 03591a7..6c9f5d9 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -426,6 +426,10 @@
'power.runtime_error' is set or 'power.disable_depth' is greater than
zero)
+ bool pm_runtime_active(struct device *dev);
+ - return true if the device's runtime PM status is 'active' or its
+ 'power.disable_depth' field is not equal to zero, or false otherwise
+
bool pm_runtime_suspended(struct device *dev);
- return true if the device's runtime PM status is 'suspended' and its
'power.disable_depth' field is equal to zero, or false otherwise
diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt
index cf794af..e1498ff 100644
--- a/Documentation/trace/events-power.txt
+++ b/Documentation/trace/events-power.txt
@@ -17,7 +17,7 @@
1. Power state switch events
============================
-1.1 New trace API
+1.1 Trace API
-----------------
A 'cpu' event class gathers the CPU-related events: cpuidle and
@@ -41,31 +41,6 @@
space tools which are using it to detect the end of the current state, and so to
correctly draw the states diagrams and to calculate accurate statistics etc.
-1.2 DEPRECATED trace API
-------------------------
-
-A new Kconfig option CONFIG_EVENT_POWER_TRACING_DEPRECATED with the default value of
-'y' has been created. This allows the legacy trace power API to be used conjointly
-with the new trace API.
-The Kconfig option, the old trace API (in include/trace/events/power.h) and the
-old trace points will disappear in a future release (namely 2.6.41).
-
-power_start "type=%lu state=%lu cpu_id=%lu"
-power_frequency "type=%lu state=%lu cpu_id=%lu"
-power_end "cpu_id=%lu"
-
-The 'type' parameter takes one of those macros:
- . POWER_NONE = 0,
- . POWER_CSTATE = 1, /* C-State */
- . POWER_PSTATE = 2, /* Frequency change or DVFS */
-
-The 'state' parameter is set depending on the type:
- . Target C-state for type=POWER_CSTATE,
- . Target frequency for type=POWER_PSTATE,
-
-power_end is used to indicate the exit of a state, corresponding to the latest
-power_start event.
-
2. Clocks events
================
The clock events are used for clock enable/disable and for
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 6f51fed..53d6a3c 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1842,6 +1842,89 @@
# cat buffer_size_kb
85
+Snapshot
+--------
+CONFIG_TRACER_SNAPSHOT makes a generic snapshot feature
+available to all non latency tracers. (Latency tracers which
+record max latency, such as "irqsoff" or "wakeup", can't use
+this feature, since those are already using the snapshot
+mechanism internally.)
+
+Snapshot preserves a current trace buffer at a particular point
+in time without stopping tracing. Ftrace swaps the current
+buffer with a spare buffer, and tracing continues in the new
+current (=previous spare) buffer.
+
+The following debugfs files in "tracing" are related to this
+feature:
+
+ snapshot:
+
+ This is used to take a snapshot and to read the output
+ of the snapshot. Echo 1 into this file to allocate a
+ spare buffer and to take a snapshot (swap), then read
+ the snapshot from this file in the same format as
+ "trace" (described above in the section "The File
+ System"). Both reads snapshot and tracing are executable
+ in parallel. When the spare buffer is allocated, echoing
+ 0 frees it, and echoing else (positive) values clear the
+ snapshot contents.
+ More details are shown in the table below.
+
+ status\input | 0 | 1 | else |
+ --------------+------------+------------+------------+
+ not allocated |(do nothing)| alloc+swap | EINVAL |
+ --------------+------------+------------+------------+
+ allocated | free | swap | clear |
+ --------------+------------+------------+------------+
+
+Here is an example of using the snapshot feature.
+
+ # echo 1 > events/sched/enable
+ # echo 1 > snapshot
+ # cat snapshot
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 71/71 #P:8
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ <idle>-0 [005] d... 2440.603828: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2242 next_prio=120
+ sleep-2242 [005] d... 2440.603846: sched_switch: prev_comm=snapshot-test-2 prev_pid=2242 prev_prio=120 prev_state=R ==> next_comm=kworker/5:1 next_pid=60 next_prio=120
+[...]
+ <idle>-0 [002] d... 2440.707230: sched_switch: prev_comm=swapper/2 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2229 next_prio=120
+
+ # cat trace
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 77/77 #P:8
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ <idle>-0 [007] d... 2440.707395: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2243 next_prio=120
+ snapshot-test-2-2229 [002] d... 2440.707438: sched_switch: prev_comm=snapshot-test-2 prev_pid=2229 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
+[...]
+
+
+If you try to use this snapshot feature when current tracer is
+one of the latency tracers, you will get the following results.
+
+ # echo wakeup > current_tracer
+ # echo 1 > snapshot
+bash: echo: write error: Device or resource busy
+ # cat snapshot
+cat: snapshot: Device or resource busy
+
-----------
More details can be found in the source code, in the
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index a4df553..c25439a 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -293,7 +293,7 @@
4.11 KVM_GET_REGS
Capability: basic
-Architectures: all
+Architectures: all except ARM
Type: vcpu ioctl
Parameters: struct kvm_regs (out)
Returns: 0 on success, -1 on error
@@ -314,7 +314,7 @@
4.12 KVM_SET_REGS
Capability: basic
-Architectures: all
+Architectures: all except ARM
Type: vcpu ioctl
Parameters: struct kvm_regs (in)
Returns: 0 on success, -1 on error
@@ -600,7 +600,7 @@
4.24 KVM_CREATE_IRQCHIP
Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86, ia64, ARM
Type: vm ioctl
Parameters: none
Returns: 0 on success, -1 on error
@@ -608,21 +608,39 @@
Creates an interrupt controller model in the kernel. On x86, creates a virtual
ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC. On ia64, a IOSAPIC is created.
+only go to the IOAPIC. On ia64, a IOSAPIC is created. On ARM, a GIC is
+created.
4.25 KVM_IRQ_LINE
Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86, ia64, arm
Type: vm ioctl
Parameters: struct kvm_irq_level
Returns: 0 on success, -1 on error
Sets the level of a GSI input to the interrupt controller model in the kernel.
-Requires that an interrupt controller model has been previously created with
-KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level
-to be set to 1 and then back to 0.
+On some architectures it is required that an interrupt controller model has
+been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered
+interrupts require the level to be set to 1 and then back to 0.
+
+ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip
+(GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for
+specific cpus. The irq field is interpreted like this:
+
+ bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 |
+ field: | irq_type | vcpu_index | irq_id |
+
+The irq_type field has the following values:
+- irq_type[0]: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ
+- irq_type[1]: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.)
+ (the vcpu_index field is ignored)
+- irq_type[2]: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.)
+
+(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs)
+
+In both cases, level is used to raise/lower the line.
struct kvm_irq_level {
union {
@@ -1775,6 +1793,27 @@
PPC | KVM_REG_PPC_VPA_DTL | 128
PPC | KVM_REG_PPC_EPCR | 32
+ARM registers are mapped using the lower 32 bits. The upper 16 of that
+is the register group type, or coprocessor number:
+
+ARM core registers have the following id bit patterns:
+ 0x4002 0000 0010 <index into the kvm_regs struct:16>
+
+ARM 32-bit CP15 registers have the following id bit patterns:
+ 0x4002 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3>
+
+ARM 64-bit CP15 registers have the following id bit patterns:
+ 0x4003 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3>
+
+ARM CCSIDR registers are demultiplexed by CSSELR value:
+ 0x4002 0000 0011 00 <csselr:8>
+
+ARM 32-bit VFP control registers have the following id bit patterns:
+ 0x4002 0000 0012 1 <regno:12>
+
+ARM 64-bit FP registers have the following id bit patterns:
+ 0x4002 0000 0012 0 <regno:12>
+
4.69 KVM_GET_ONE_REG
Capability: KVM_CAP_ONE_REG
@@ -2127,6 +2166,50 @@
valid entries found.
+4.77 KVM_ARM_VCPU_INIT
+
+Capability: basic
+Architectures: arm
+Type: vcpu ioctl
+Parameters: struct struct kvm_vcpu_init (in)
+Returns: 0 on success; -1 on error
+Errors:
+ EINVAL: the target is unknown, or the combination of features is invalid.
+ ENOENT: a features bit specified is unknown.
+
+This tells KVM what type of CPU to present to the guest, and what
+optional features it should have. This will cause a reset of the cpu
+registers to their initial values. If this is not called, KVM_RUN will
+return ENOEXEC for that vcpu.
+
+Note that because some registers reflect machine topology, all vcpus
+should be created before this ioctl is invoked.
+
+Possible features:
+ - KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state.
+ Depends on KVM_CAP_ARM_PSCI.
+
+
+4.78 KVM_GET_REG_LIST
+
+Capability: basic
+Architectures: arm
+Type: vcpu ioctl
+Parameters: struct kvm_reg_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+ E2BIG: the reg index list is too big to fit in the array specified by
+ the user (the number required will be written into n).
+
+struct kvm_reg_list {
+ __u64 n; /* number of registers in reg[] */
+ __u64 reg[0];
+};
+
+This ioctl returns the guest registers that are supported for the
+KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
+
+
5. The kvm_run structure
------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 8bbd949..cdb8fe8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -670,8 +670,16 @@
F: include/linux/amba/kmi.h
ARM PRIMECELL MMCI PL180/1 DRIVER
-S: Orphan
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
F: drivers/mmc/host/mmci.*
+F: include/linux/amba/mmci.h
+
+ARM PRIMECELL UART PL010 AND PL011 DRIVERS
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
+F: drivers/tty/serial/amba-pl01*.c
+F: include/linux/amba/serial.h
ARM PRIMECELL BUS SUPPORT
M: Russell King <linux@arm.linux.org.uk>
@@ -1303,7 +1311,7 @@
F: include/linux/async_tx.h
AT24 EEPROM DRIVER
-M: Wolfram Sang <w.sang@pengutronix.de>
+M: Wolfram Sang <wsa@the-dreams.de>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/misc/eeprom/at24.c
@@ -2140,10 +2148,10 @@
F: tools/power/cpupower
CPUSETS
-M: Paul Menage <paul@paulmenage.org>
+M: Li Zefan <lizefan@huawei.com>
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
-S: Supported
+S: Maintained
F: Documentation/cgroups/cpusets.txt
F: include/linux/cpuset.h
F: kernel/cpuset.c
@@ -3752,12 +3760,11 @@
F: drivers/i2c/i2c-stub.c
I2C SUBSYSTEM
-M: Wolfram Sang <w.sang@pengutronix.de>
+M: Wolfram Sang <wsa@the-dreams.de>
M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
-T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.pengutronix.de/git/wsa/linux.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
@@ -4476,6 +4483,15 @@
F: arch/s390/kvm/
F: drivers/s390/kvm/
+KERNEL VIRTUAL MACHINE (KVM) FOR ARM
+M: Christoffer Dall <cdall@cs.columbia.edu>
+L: kvmarm@lists.cs.columbia.edu
+W: http://systems.cs.columbia.edu/projects/kvm-arm
+S: Maintained
+F: arch/arm/include/uapi/asm/kvm*
+F: arch/arm/include/asm/kvm*
+F: arch/arm/kvm/
+
KEXEC
M: Eric Biederman <ebiederm@xmission.com>
W: http://kernel.org/pub/linux/utils/kernel/kexec/
@@ -5766,15 +5782,6 @@
S: Maintained
F: drivers/i2c/muxes/i2c-mux-pca9541.c
-PCA9564/PCA9665 I2C BUS DRIVER
-M: Wolfram Sang <w.sang@pengutronix.de>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: drivers/i2c/algos/i2c-algo-pca.c
-F: drivers/i2c/busses/i2c-pca-*
-F: include/linux/i2c-algo-pca.h
-F: include/linux/i2c-pca-platform.h
-
PCDP - PRIMARY CONSOLE AND DEBUG PORT
M: Khalid Aziz <khalid@gonehiking.org>
S: Maintained
@@ -6586,7 +6593,7 @@
F: drivers/dma/dw_dmac.c
TIMEKEEPING, NTP
-M: John Stultz <johnstul@us.ibm.com>
+M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
@@ -7166,6 +7173,7 @@
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
T: git git://git.secretlab.ca/git/linux-2.6.git
@@ -7531,6 +7539,11 @@
F: include/linux/if_team.h
F: include/uapi/linux/if_team.h
+TECHNOLOGIC SYSTEMS TS-5500 PLATFORM SUPPORT
+M: Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>
+S: Maintained
+F: arch/x86/platform/ts5500/
+
TECHNOTREND USB IR RECEIVER
M: Sean Young <sean@mess.org>
L: linux-media@vger.kernel.org
@@ -7605,6 +7618,22 @@
F: drivers/video/backlight/lp855x_bl.c
F: include/linux/platform_data/lp855x.h
+TI LP8727 CHARGER DRIVER
+M: Milo Kim <milo.kim@ti.com>
+S: Maintained
+F: drivers/power/lp8727_charger.c
+F: include/linux/platform_data/lp8727.h
+
+TI LP8788 MFD DRIVER
+M: Milo Kim <milo.kim@ti.com>
+S: Maintained
+F: drivers/iio/adc/lp8788_adc.c
+F: drivers/leds/leds-lp8788.c
+F: drivers/mfd/lp8788*.c
+F: drivers/power/lp8788-charger.c
+F: drivers/regulator/lp8788-*.c
+F: include/linux/mfd/lp8788*.h
+
TI TWL4030 SERIES SOC CODEC DRIVER
M: Peter Ujfalusi <peter.ujfalusi@ti.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
diff --git a/Makefile b/Makefile
index 08ef9bd..6fccf65 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Unicycling Gorilla
# *DOCUMENTATION*
@@ -165,7 +165,8 @@
# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
-SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
diff --git a/arch/Kconfig b/arch/Kconfig
index 7f8f281..97fb7d0 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -76,6 +76,15 @@
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
+config KPROBES_ON_FTRACE
+ def_bool y
+ depends on KPROBES && HAVE_KPROBES_ON_FTRACE
+ depends on DYNAMIC_FTRACE_WITH_REGS
+ help
+ If function tracer is enabled and the arch supports full
+ passing of pt_regs to function tracing, then kprobes can
+ optimize on top of function tracing.
+
config UPROBES
bool "Transparent user-space probes (EXPERIMENTAL)"
depends on UPROBE_EVENT && PERF_EVENTS
@@ -158,6 +167,9 @@
config HAVE_OPTPROBES
bool
+config HAVE_KPROBES_ON_FTRACE
+ bool
+
config HAVE_NMI_WATCHDOG
bool
#
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9d5904c..9b504af 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -5,7 +5,6 @@
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_SYSCALL_WRAPPERS
- select HAVE_IRQ_WORK
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 14db93e..dbc1760 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1139,6 +1139,7 @@
SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
{
struct rusage32 r;
+ cputime_t utime, stime;
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
return -EINVAL;
@@ -1146,8 +1147,9 @@
memset(&r, 0, sizeof(r));
switch (who) {
case RUSAGE_SELF:
- jiffies_to_timeval32(current->utime, &r.ru_utime);
- jiffies_to_timeval32(current->stime, &r.ru_stime);
+ task_cputime(current, &utime, &stime);
+ jiffies_to_timeval32(utime, &r.ru_utime);
+ jiffies_to_timeval32(stime, &r.ru_stime);
r.ru_minflt = current->min_flt;
r.ru_majflt = current->maj_flt;
break;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67874b8..2f66b2e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -36,7 +36,6 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_IDE if PCI || ISA || PCMCIA
- select HAVE_IRQ_WORK
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
@@ -1620,6 +1619,16 @@
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
+config ARM_PSCI
+ bool "Support for the ARM Power State Coordination Interface (PSCI)"
+ depends on CPU_V7
+ help
+ Say Y here if you want Linux to communicate with system firmware
+ implementing the PSCI specification for CPU-centric power
+ management operations described in ARM document number ARM DEN
+ 0022A ("Power State Coordination Interface System Software on
+ ARM processors").
+
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP
@@ -1637,7 +1646,7 @@
default 355 if ARCH_U8500
default 264 if MACH_H4700
default 512 if SOC_OMAP5
- default 288 if ARCH_VT8500
+ default 288 if ARCH_VT8500 || ARCH_SUNXI
default 0
help
Maximum number of GPIOs in the system.
@@ -1655,6 +1664,9 @@
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
default 100
+config SCHED_HRTICK
+ def_bool HIGH_RES_TIMERS
+
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
depends on CPU_V7 && !CPU_V6 && !CPU_V6K
@@ -2322,3 +2334,5 @@
source "crypto/Kconfig"
source "lib/Kconfig"
+
+source "arch/arm/kvm/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30c443c..4bcd2d6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -252,6 +252,7 @@
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
core-$(CONFIG_XEN) += arch/arm/xen/
+core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 63f2fbc..69140ba 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,10 +170,9 @@
gpio-bank = <8>;
};
- pinctrl@80157000 {
- // This is actually the PRCMU base address
- reg = <0x80157000 0x2000>;
- compatible = "stericsson,nmk_pinctrl";
+ pinctrl {
+ compatible = "stericsson,nmk-pinctrl";
+ prcm = <&prcmu>;
};
usb@a03e0000 {
@@ -190,9 +189,10 @@
interrupts = <0 25 0x4>;
};
- prcmu@80157000 {
+ prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x1000>;
+ reg-names = "prcmu";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 5927a8d..6aad34a 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -37,6 +37,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu@901 {
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 055fca5..3329719 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -58,10 +58,11 @@
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
- clock-controller@88000000 {
+ clks: clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
+ #clock-cells = <1>;
};
reset-controller@88010000 {
@@ -85,6 +86,7 @@
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x10000>;
interrupts = <27>;
+ clocks = <&clks 5>;
};
};
@@ -104,6 +106,7 @@
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
+ clocks = <&clks 35>;
};
};
@@ -117,6 +120,7 @@
compatible = "powervr,sgx531";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
+ clocks = <&clks 32>;
};
};
@@ -130,6 +134,7 @@
compatible = "sirf,prima2-video-codec";
reg = <0xa0000000 0x8000000>;
interrupts = <5>;
+ clocks = <&clks 33>;
};
};
@@ -149,12 +154,14 @@
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
+ clocks = <&clks 9>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
+ clocks = <&clks 8>;
};
};
@@ -174,12 +181,14 @@
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
+ clocks = <&clks 26>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
+ clocks = <&clks 27>;
};
uart0: uart@b0050000 {
@@ -187,6 +196,7 @@
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
interrupts = <17>;
+ clocks = <&clks 13>;
};
uart1: uart@b0060000 {
@@ -194,6 +204,7 @@
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
interrupts = <18>;
+ clocks = <&clks 14>;
};
uart2: uart@b0070000 {
@@ -201,6 +212,7 @@
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
interrupts = <19>;
+ clocks = <&clks 15>;
};
usp0: usp@b0080000 {
@@ -208,6 +220,7 @@
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
+ clocks = <&clks 28>;
};
usp1: usp@b0090000 {
@@ -215,6 +228,7 @@
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
+ clocks = <&clks 29>;
};
usp2: usp@b00a0000 {
@@ -222,6 +236,7 @@
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
+ clocks = <&clks 30>;
};
dmac0: dma-controller@b00b0000 {
@@ -229,6 +244,7 @@
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
+ clocks = <&clks 24>;
};
dmac1: dma-controller@b0160000 {
@@ -236,11 +252,13 @@
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
+ clocks = <&clks 25>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
+ clocks = <&clks 31>;
};
spi0: spi@b00d0000 {
@@ -248,6 +266,7 @@
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
+ clocks = <&clks 19>;
};
spi1: spi@b0170000 {
@@ -255,6 +274,7 @@
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
+ clocks = <&clks 20>;
};
i2c0: i2c@b00e0000 {
@@ -262,6 +282,7 @@
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
+ clocks = <&clks 17>;
};
i2c1: i2c@b00f0000 {
@@ -269,12 +290,14 @@
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
+ clocks = <&clks 18>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
+ clocks = <&clks 16>;
};
gpio: pinctrl@b0120000 {
@@ -507,17 +530,20 @@
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
+ clocks = <&clks 21>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
+ clocks = <&clks 22>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
+ clocks = <&clks 23>;
};
pci-iobg {
@@ -616,12 +642,14 @@
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
+ clocks = <&clks 40>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
+ clocks = <&clks 41>;
};
sata@b00f0000 {
@@ -634,6 +662,7 @@
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
+ clocks = <&clks 7>;
};
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index e61fdd4..f99f60d 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -16,4 +16,34 @@
memory {
reg = <0x40000000 0x80000000>;
};
+
+ soc {
+ pinctrl@01c20800 {
+ compatible = "allwinner,sun4i-a10-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB22", "PB23";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart0_pins_b: uart0@1 {
+ allwinner,pins = "PF2", "PF4";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PA10", "PA11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 498a091..4a1e45d 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -24,6 +24,8 @@
soc {
uart1: uart@01c28400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 59a2d26..e112189 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -17,4 +17,27 @@
memory {
reg = <0x40000000 0x20000000>;
};
+
+ soc {
+ pinctrl@01c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S
index e59b1d5..19d6cd6 100644
--- a/arch/arm/crypto/aes-armv4.S
+++ b/arch/arm/crypto/aes-armv4.S
@@ -34,8 +34,9 @@
@ A little glue here to select the correct code below for the ARM CPU
@ that is being targetted.
+#include <linux/linkage.h>
+
.text
-.code 32
.type AES_Te,%object
.align 5
@@ -145,10 +146,8 @@
@ void AES_encrypt(const unsigned char *in, unsigned char *out,
@ const AES_KEY *key) {
-.global AES_encrypt
-.type AES_encrypt,%function
.align 5
-AES_encrypt:
+ENTRY(AES_encrypt)
sub r3,pc,#8 @ AES_encrypt
stmdb sp!,{r1,r4-r12,lr}
mov r12,r0 @ inp
@@ -239,15 +238,8 @@
strb r6,[r12,#14]
strb r3,[r12,#15]
#endif
-#if __ARM_ARCH__>=5
ldmia sp!,{r4-r12,pc}
-#else
- ldmia sp!,{r4-r12,lr}
- tst lr,#1
- moveq pc,lr @ be binary compatible with V4, yet
- .word 0xe12fff1e @ interoperable with Thumb ISA:-)
-#endif
-.size AES_encrypt,.-AES_encrypt
+ENDPROC(AES_encrypt)
.type _armv4_AES_encrypt,%function
.align 2
@@ -386,10 +378,8 @@
ldr pc,[sp],#4 @ pop and return
.size _armv4_AES_encrypt,.-_armv4_AES_encrypt
-.global private_AES_set_encrypt_key
-.type private_AES_set_encrypt_key,%function
.align 5
-private_AES_set_encrypt_key:
+ENTRY(private_AES_set_encrypt_key)
_armv4_AES_set_encrypt_key:
sub r3,pc,#8 @ AES_set_encrypt_key
teq r0,#0
@@ -658,15 +648,11 @@
.Ldone: mov r0,#0
ldmia sp!,{r4-r12,lr}
-.Labrt: tst lr,#1
- moveq pc,lr @ be binary compatible with V4, yet
- .word 0xe12fff1e @ interoperable with Thumb ISA:-)
-.size private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
+.Labrt: mov pc,lr
+ENDPROC(private_AES_set_encrypt_key)
-.global private_AES_set_decrypt_key
-.type private_AES_set_decrypt_key,%function
.align 5
-private_AES_set_decrypt_key:
+ENTRY(private_AES_set_decrypt_key)
str lr,[sp,#-4]! @ push lr
#if 0
@ kernel does both of these in setkey so optimise this bit out by
@@ -748,15 +734,8 @@
bne .Lmix
mov r0,#0
-#if __ARM_ARCH__>=5
ldmia sp!,{r4-r12,pc}
-#else
- ldmia sp!,{r4-r12,lr}
- tst lr,#1
- moveq pc,lr @ be binary compatible with V4, yet
- .word 0xe12fff1e @ interoperable with Thumb ISA:-)
-#endif
-.size private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
+ENDPROC(private_AES_set_decrypt_key)
.type AES_Td,%object
.align 5
@@ -862,10 +841,8 @@
@ void AES_decrypt(const unsigned char *in, unsigned char *out,
@ const AES_KEY *key) {
-.global AES_decrypt
-.type AES_decrypt,%function
.align 5
-AES_decrypt:
+ENTRY(AES_decrypt)
sub r3,pc,#8 @ AES_decrypt
stmdb sp!,{r1,r4-r12,lr}
mov r12,r0 @ inp
@@ -956,15 +933,8 @@
strb r6,[r12,#14]
strb r3,[r12,#15]
#endif
-#if __ARM_ARCH__>=5
ldmia sp!,{r4-r12,pc}
-#else
- ldmia sp!,{r4-r12,lr}
- tst lr,#1
- moveq pc,lr @ be binary compatible with V4, yet
- .word 0xe12fff1e @ interoperable with Thumb ISA:-)
-#endif
-.size AES_decrypt,.-AES_decrypt
+ENDPROC(AES_decrypt)
.type _armv4_AES_decrypt,%function
.align 2
@@ -1064,7 +1034,9 @@
and r9,lr,r1,lsr#8
ldrb r7,[r10,r7] @ Td4[s1>>0]
- ldrb r1,[r10,r1,lsr#24] @ Td4[s1>>24]
+ ARM( ldrb r1,[r10,r1,lsr#24] ) @ Td4[s1>>24]
+ THUMB( add r1,r10,r1,lsr#24 ) @ Td4[s1>>24]
+ THUMB( ldrb r1,[r1] )
ldrb r8,[r10,r8] @ Td4[s1>>16]
eor r0,r7,r0,lsl#24
ldrb r9,[r10,r9] @ Td4[s1>>8]
@@ -1077,7 +1049,9 @@
ldrb r8,[r10,r8] @ Td4[s2>>0]
and r9,lr,r2,lsr#16
- ldrb r2,[r10,r2,lsr#24] @ Td4[s2>>24]
+ ARM( ldrb r2,[r10,r2,lsr#24] ) @ Td4[s2>>24]
+ THUMB( add r2,r10,r2,lsr#24 ) @ Td4[s2>>24]
+ THUMB( ldrb r2,[r2] )
eor r0,r0,r7,lsl#8
ldrb r9,[r10,r9] @ Td4[s2>>16]
eor r1,r8,r1,lsl#16
@@ -1090,7 +1064,9 @@
and r9,lr,r3 @ i2
ldrb r9,[r10,r9] @ Td4[s3>>0]
- ldrb r3,[r10,r3,lsr#24] @ Td4[s3>>24]
+ ARM( ldrb r3,[r10,r3,lsr#24] ) @ Td4[s3>>24]
+ THUMB( add r3,r10,r3,lsr#24 ) @ Td4[s3>>24]
+ THUMB( ldrb r3,[r3] )
eor r0,r0,r7,lsl#16
ldr r7,[r11,#0]
eor r1,r1,r8,lsl#8
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index 7050ab1..92c6eed 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -51,13 +51,12 @@
@ Profiler-assisted and platform-specific optimization resulted in 10%
@ improvement on Cortex A8 core and 12.2 cycles per byte.
+#include <linux/linkage.h>
+
.text
-.global sha1_block_data_order
-.type sha1_block_data_order,%function
-
.align 2
-sha1_block_data_order:
+ENTRY(sha1_block_data_order)
stmdb sp!,{r4-r12,lr}
add r2,r1,r2,lsl#6 @ r2 to point at the end of r1
ldmia r0,{r3,r4,r5,r6,r7}
@@ -194,7 +193,7 @@
eor r10,r10,r7,ror#2 @ F_00_19(B,C,D)
str r9,[r14,#-4]!
add r3,r3,r10 @ E+=F_00_19(B,C,D)
- teq r14,sp
+ cmp r14,sp
bne .L_00_15 @ [((11+4)*5+2)*3]
#if __ARM_ARCH__<7
ldrb r10,[r1,#2]
@@ -374,7 +373,9 @@
@ F_xx_xx
add r3,r3,r9 @ E+=X[i]
add r3,r3,r10 @ E+=F_20_39(B,C,D)
- teq r14,sp @ preserve carry
+ ARM( teq r14,sp ) @ preserve carry
+ THUMB( mov r11,sp )
+ THUMB( teq r14,r11 ) @ preserve carry
bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4]
bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes
@@ -466,7 +467,7 @@
add r3,r3,r9 @ E+=X[i]
add r3,r3,r10 @ E+=F_40_59(B,C,D)
add r3,r3,r11,ror#2
- teq r14,sp
+ cmp r14,sp
bne .L_40_59 @ [+((12+5)*5+2)*4]
ldr r8,.LK_60_79
@@ -485,19 +486,12 @@
teq r1,r2
bne .Lloop @ [+18], total 1307
-#if __ARM_ARCH__>=5
ldmia sp!,{r4-r12,pc}
-#else
- ldmia sp!,{r4-r12,lr}
- tst lr,#1
- moveq pc,lr @ be binary compatible with V4, yet
- .word 0xe12fff1e @ interoperable with Thumb ISA:-)
-#endif
.align 2
.LK_00_19: .word 0x5a827999
.LK_20_39: .word 0x6ed9eba1
.LK_40_59: .word 0x8f1bbcdc
.LK_60_79: .word 0xca62c1d6
-.size sha1_block_data_order,.-sha1_block_data_order
+ENDPROC(sha1_block_data_order)
.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
.align 2
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index eb87200..05ee9ee 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -246,18 +246,14 @@
*
* This macro is intended for forcing the CPU into SVC mode at boot time.
* you cannot return to the original mode.
- *
- * Beware, it also clobers LR.
*/
.macro safe_svcmode_maskall reg:req
#if __LINUX_ARM_ARCH__ >= 6
mrs \reg , cpsr
- mov lr , \reg
- and lr , lr , #MODE_MASK
- cmp lr , #HYP_MODE
- orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT
+ eor \reg, \reg, #HYP_MODE
+ tst \reg, #MODE_MASK
bic \reg , \reg , #MODE_MASK
- orr \reg , \reg , #SVC_MODE
+ orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
orr \reg, \reg, #PSR_A_BIT
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index a59dcb5..ad41ec2 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -64,6 +64,24 @@
#define read_cpuid_ext(reg) 0
#endif
+#define ARM_CPU_IMP_ARM 0x41
+#define ARM_CPU_IMP_INTEL 0x69
+
+#define ARM_CPU_PART_ARM1136 0xB360
+#define ARM_CPU_PART_ARM1156 0xB560
+#define ARM_CPU_PART_ARM1176 0xB760
+#define ARM_CPU_PART_ARM11MPCORE 0xB020
+#define ARM_CPU_PART_CORTEX_A8 0xC080
+#define ARM_CPU_PART_CORTEX_A9 0xC090
+#define ARM_CPU_PART_CORTEX_A5 0xC050
+#define ARM_CPU_PART_CORTEX_A15 0xC0F0
+#define ARM_CPU_PART_CORTEX_A7 0xC070
+
+#define ARM_CPU_XSCALE_ARCH_MASK 0xe000
+#define ARM_CPU_XSCALE_ARCH_V1 0x2000
+#define ARM_CPU_XSCALE_ARCH_V2 0x4000
+#define ARM_CPU_XSCALE_ARCH_V3 0x6000
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
@@ -74,6 +92,21 @@
return read_cpuid(CPUID_ID);
}
+static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
+{
+ return (read_cpuid_id() & 0xFF000000) >> 24;
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_part_number(void)
+{
+ return read_cpuid_id() & 0xFFF0;
+}
+
+static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void)
+{
+ return read_cpuid_part_number() & ARM_CPU_XSCALE_ARCH_MASK;
+}
+
static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
{
return read_cpuid(CPUID_CACHETYPE);
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
index f2e5cad..2381199 100644
--- a/arch/arm/include/asm/cti.h
+++ b/arch/arm/include/asm/cti.h
@@ -2,6 +2,7 @@
#define __ASMARM_CTI_H
#include <asm/io.h>
+#include <asm/hardware/coresight.h>
/* The registers' definition is from section 3.2 of
* Embedded Cross Trigger Revision: r0p0
@@ -35,11 +36,6 @@
#define LOCKACCESS 0xFB0
#define LOCKSTATUS 0xFB4
-/* write this value to LOCKACCESS will unlock the module, and
- * other value will lock the module
- */
-#define LOCKCODE 0xC5ACCE55
-
/**
* struct cti - cross trigger interface struct
* @base: mapped virtual address for the cti base
@@ -146,7 +142,7 @@
*/
static inline void cti_unlock(struct cti *cti)
{
- __raw_writel(LOCKCODE, cti->base + LOCKACCESS);
+ __raw_writel(CS_LAR_KEY, cti->base + LOCKACCESS);
}
/**
@@ -158,6 +154,6 @@
*/
static inline void cti_lock(struct cti *cti)
{
- __raw_writel(~LOCKCODE, cti->base + LOCKACCESS);
+ __raw_writel(~CS_LAR_KEY, cti->base + LOCKACCESS);
}
#endif
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
index 7ecd793..0cf7a6b 100644
--- a/arch/arm/include/asm/hardware/coresight.h
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -36,7 +36,7 @@
/* CoreSight Component Registers */
#define CSCR_CLASS 0xff4
-#define UNLOCK_MAGIC 0xc5acce55
+#define CS_LAR_KEY 0xc5acce55
/* ETM control register, "ETM Architecture", 3.3.1 */
#define ETMR_CTRL 0
@@ -147,11 +147,11 @@
#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
#define etm_unlock(t) \
- do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+ do { etm_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0)
#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
#define etb_unlock(t) \
- do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+ do { etb_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0)
#endif /* __ASM_HARDWARE_CORESIGHT_H */
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 01169dd..eef55ea 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -85,6 +85,9 @@
#define ARM_DSCR_HDBGEN (1 << 14)
#define ARM_DSCR_MDBGEN (1 << 15)
+/* OSLSR os lock model bits */
+#define ARM_OSLSR_OSLM0 (1 << 0)
+
/* opcode2 numbers for the co-processor instructions. */
#define ARM_OP2_BVR 4
#define ARM_OP2_BCR 5
diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h
index bf863ed..1a66f907 100644
--- a/arch/arm/include/asm/idmap.h
+++ b/arch/arm/include/asm/idmap.h
@@ -8,6 +8,7 @@
#define __idmap __section(.idmap.text) noinline notrace
extern pgd_t *idmap_pgd;
+extern pgd_t *hyp_pgd;
void setup_mm_for_reboot(void);
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
new file mode 100644
index 0000000..7c3d813
--- /dev/null
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_ARM_H__
+#define __ARM_KVM_ARM_H__
+
+#include <linux/types.h>
+
+/* Hyp Configuration Register (HCR) bits */
+#define HCR_TGE (1 << 27)
+#define HCR_TVM (1 << 26)
+#define HCR_TTLB (1 << 25)
+#define HCR_TPU (1 << 24)
+#define HCR_TPC (1 << 23)
+#define HCR_TSW (1 << 22)
+#define HCR_TAC (1 << 21)
+#define HCR_TIDCP (1 << 20)
+#define HCR_TSC (1 << 19)
+#define HCR_TID3 (1 << 18)
+#define HCR_TID2 (1 << 17)
+#define HCR_TID1 (1 << 16)
+#define HCR_TID0 (1 << 15)
+#define HCR_TWE (1 << 14)
+#define HCR_TWI (1 << 13)
+#define HCR_DC (1 << 12)
+#define HCR_BSU (3 << 10)
+#define HCR_BSU_IS (1 << 10)
+#define HCR_FB (1 << 9)
+#define HCR_VA (1 << 8)
+#define HCR_VI (1 << 7)
+#define HCR_VF (1 << 6)
+#define HCR_AMO (1 << 5)
+#define HCR_IMO (1 << 4)
+#define HCR_FMO (1 << 3)
+#define HCR_PTW (1 << 2)
+#define HCR_SWIO (1 << 1)
+#define HCR_VM 1
+
+/*
+ * The bits we set in HCR:
+ * TAC: Trap ACTLR
+ * TSC: Trap SMC
+ * TSW: Trap cache operations by set/way
+ * TWI: Trap WFI
+ * TIDCP: Trap L2CTLR/L2ECTLR
+ * BSU_IS: Upgrade barriers to the inner shareable domain
+ * FB: Force broadcast of all maintainance operations
+ * AMO: Override CPSR.A and enable signaling with VA
+ * IMO: Override CPSR.I and enable signaling with VI
+ * FMO: Override CPSR.F and enable signaling with VF
+ * SWIO: Turn set/way invalidates into set/way clean+invalidate
+ */
+#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
+ HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
+ HCR_SWIO | HCR_TIDCP)
+#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
+
+/* System Control Register (SCTLR) bits */
+#define SCTLR_TE (1 << 30)
+#define SCTLR_EE (1 << 25)
+#define SCTLR_V (1 << 13)
+
+/* Hyp System Control Register (HSCTLR) bits */
+#define HSCTLR_TE (1 << 30)
+#define HSCTLR_EE (1 << 25)
+#define HSCTLR_FI (1 << 21)
+#define HSCTLR_WXN (1 << 19)
+#define HSCTLR_I (1 << 12)
+#define HSCTLR_C (1 << 2)
+#define HSCTLR_A (1 << 1)
+#define HSCTLR_M 1
+#define HSCTLR_MASK (HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I | \
+ HSCTLR_WXN | HSCTLR_FI | HSCTLR_EE | HSCTLR_TE)
+
+/* TTBCR and HTCR Registers bits */
+#define TTBCR_EAE (1 << 31)
+#define TTBCR_IMP (1 << 30)
+#define TTBCR_SH1 (3 << 28)
+#define TTBCR_ORGN1 (3 << 26)
+#define TTBCR_IRGN1 (3 << 24)
+#define TTBCR_EPD1 (1 << 23)
+#define TTBCR_A1 (1 << 22)
+#define TTBCR_T1SZ (3 << 16)
+#define TTBCR_SH0 (3 << 12)
+#define TTBCR_ORGN0 (3 << 10)
+#define TTBCR_IRGN0 (3 << 8)
+#define TTBCR_EPD0 (1 << 7)
+#define TTBCR_T0SZ 3
+#define HTCR_MASK (TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0)
+
+/* Hyp System Trap Register */
+#define HSTR_T(x) (1 << x)
+#define HSTR_TTEE (1 << 16)
+#define HSTR_TJDBX (1 << 17)
+
+/* Hyp Coprocessor Trap Register */
+#define HCPTR_TCP(x) (1 << x)
+#define HCPTR_TCP_MASK (0x3fff)
+#define HCPTR_TASE (1 << 15)
+#define HCPTR_TTA (1 << 20)
+#define HCPTR_TCPAC (1 << 31)
+
+/* Hyp Debug Configuration Register bits */
+#define HDCR_TDRA (1 << 11)
+#define HDCR_TDOSA (1 << 10)
+#define HDCR_TDA (1 << 9)
+#define HDCR_TDE (1 << 8)
+#define HDCR_HPME (1 << 7)
+#define HDCR_TPM (1 << 6)
+#define HDCR_TPMCR (1 << 5)
+#define HDCR_HPMN_MASK (0x1F)
+
+/*
+ * The architecture supports 40-bit IPA as input to the 2nd stage translations
+ * and PTRS_PER_S2_PGD becomes 1024, because each entry covers 1GB of address
+ * space.
+ */
+#define KVM_PHYS_SHIFT (40)
+#define KVM_PHYS_SIZE (1ULL << KVM_PHYS_SHIFT)
+#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1ULL)
+#define PTRS_PER_S2_PGD (1ULL << (KVM_PHYS_SHIFT - 30))
+#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
+#define S2_PGD_SIZE (1 << S2_PGD_ORDER)
+
+/* Virtualization Translation Control Register (VTCR) bits */
+#define VTCR_SH0 (3 << 12)
+#define VTCR_ORGN0 (3 << 10)
+#define VTCR_IRGN0 (3 << 8)
+#define VTCR_SL0 (3 << 6)
+#define VTCR_S (1 << 4)
+#define VTCR_T0SZ (0xf)
+#define VTCR_MASK (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0 | VTCR_SL0 | \
+ VTCR_S | VTCR_T0SZ)
+#define VTCR_HTCR_SH (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0)
+#define VTCR_SL_L2 (0 << 6) /* Starting-level: 2 */
+#define VTCR_SL_L1 (1 << 6) /* Starting-level: 1 */
+#define KVM_VTCR_SL0 VTCR_SL_L1
+/* stage-2 input address range defined as 2^(32-T0SZ) */
+#define KVM_T0SZ (32 - KVM_PHYS_SHIFT)
+#define KVM_VTCR_T0SZ (KVM_T0SZ & VTCR_T0SZ)
+#define KVM_VTCR_S ((KVM_VTCR_T0SZ << 1) & VTCR_S)
+
+/* Virtualization Translation Table Base Register (VTTBR) bits */
+#if KVM_VTCR_SL0 == VTCR_SL_L2 /* see ARM DDI 0406C: B4-1720 */
+#define VTTBR_X (14 - KVM_T0SZ)
+#else
+#define VTTBR_X (5 - KVM_T0SZ)
+#endif
+#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
+#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_VMID_SHIFT (48LLU)
+#define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
+
+/* Hyp Syndrome Register (HSR) bits */
+#define HSR_EC_SHIFT (26)
+#define HSR_EC (0x3fU << HSR_EC_SHIFT)
+#define HSR_IL (1U << 25)
+#define HSR_ISS (HSR_IL - 1)
+#define HSR_ISV_SHIFT (24)
+#define HSR_ISV (1U << HSR_ISV_SHIFT)
+#define HSR_SRT_SHIFT (16)
+#define HSR_SRT_MASK (0xf << HSR_SRT_SHIFT)
+#define HSR_FSC (0x3f)
+#define HSR_FSC_TYPE (0x3c)
+#define HSR_SSE (1 << 21)
+#define HSR_WNR (1 << 6)
+#define HSR_CV_SHIFT (24)
+#define HSR_CV (1U << HSR_CV_SHIFT)
+#define HSR_COND_SHIFT (20)
+#define HSR_COND (0xfU << HSR_COND_SHIFT)
+
+#define FSC_FAULT (0x04)
+#define FSC_PERM (0x0c)
+
+/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
+#define HPFAR_MASK (~0xf)
+
+#define HSR_EC_UNKNOWN (0x00)
+#define HSR_EC_WFI (0x01)
+#define HSR_EC_CP15_32 (0x03)
+#define HSR_EC_CP15_64 (0x04)
+#define HSR_EC_CP14_MR (0x05)
+#define HSR_EC_CP14_LS (0x06)
+#define HSR_EC_CP_0_13 (0x07)
+#define HSR_EC_CP10_ID (0x08)
+#define HSR_EC_JAZELLE (0x09)
+#define HSR_EC_BXJ (0x0A)
+#define HSR_EC_CP14_64 (0x0C)
+#define HSR_EC_SVC_HYP (0x11)
+#define HSR_EC_HVC (0x12)
+#define HSR_EC_SMC (0x13)
+#define HSR_EC_IABT (0x20)
+#define HSR_EC_IABT_HYP (0x21)
+#define HSR_EC_DABT (0x24)
+#define HSR_EC_DABT_HYP (0x25)
+
+#define HSR_HVC_IMM_MASK ((1UL << 16) - 1)
+
+#endif /* __ARM_KVM_ARM_H__ */
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
new file mode 100644
index 0000000..5e06e81
--- /dev/null
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_ASM_H__
+#define __ARM_KVM_ASM_H__
+
+/* 0 is reserved as an invalid value. */
+#define c0_MPIDR 1 /* MultiProcessor ID Register */
+#define c0_CSSELR 2 /* Cache Size Selection Register */
+#define c1_SCTLR 3 /* System Control Register */
+#define c1_ACTLR 4 /* Auxilliary Control Register */
+#define c1_CPACR 5 /* Coprocessor Access Control */
+#define c2_TTBR0 6 /* Translation Table Base Register 0 */
+#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */
+#define c2_TTBR1 8 /* Translation Table Base Register 1 */
+#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */
+#define c2_TTBCR 10 /* Translation Table Base Control R. */
+#define c3_DACR 11 /* Domain Access Control Register */
+#define c5_DFSR 12 /* Data Fault Status Register */
+#define c5_IFSR 13 /* Instruction Fault Status Register */
+#define c5_ADFSR 14 /* Auxilary Data Fault Status R */
+#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */
+#define c6_DFAR 16 /* Data Fault Address Register */
+#define c6_IFAR 17 /* Instruction Fault Address Register */
+#define c9_L2CTLR 18 /* Cortex A15 L2 Control Register */
+#define c10_PRRR 19 /* Primary Region Remap Register */
+#define c10_NMRR 20 /* Normal Memory Remap Register */
+#define c12_VBAR 21 /* Vector Base Address Register */
+#define c13_CID 22 /* Context ID Register */
+#define c13_TID_URW 23 /* Thread ID, User R/W */
+#define c13_TID_URO 24 /* Thread ID, User R/O */
+#define c13_TID_PRIV 25 /* Thread ID, Privileged */
+#define NR_CP15_REGS 26 /* Number of regs (incl. invalid) */
+
+#define ARM_EXCEPTION_RESET 0
+#define ARM_EXCEPTION_UNDEFINED 1
+#define ARM_EXCEPTION_SOFTWARE 2
+#define ARM_EXCEPTION_PREF_ABORT 3
+#define ARM_EXCEPTION_DATA_ABORT 4
+#define ARM_EXCEPTION_IRQ 5
+#define ARM_EXCEPTION_FIQ 6
+#define ARM_EXCEPTION_HVC 7
+
+#ifndef __ASSEMBLY__
+struct kvm;
+struct kvm_vcpu;
+
+extern char __kvm_hyp_init[];
+extern char __kvm_hyp_init_end[];
+
+extern char __kvm_hyp_exit[];
+extern char __kvm_hyp_exit_end[];
+
+extern char __kvm_hyp_vector[];
+
+extern char __kvm_hyp_code_start[];
+extern char __kvm_hyp_code_end[];
+
+extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
+
+extern void __kvm_flush_vm_context(void);
+extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
+
+extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+#endif
+
+#endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm/include/asm/kvm_coproc.h b/arch/arm/include/asm/kvm_coproc.h
new file mode 100644
index 0000000..4917c2f
--- /dev/null
+++ b/arch/arm/include/asm/kvm_coproc.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2012 Rusty Russell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_COPROC_H__
+#define __ARM_KVM_COPROC_H__
+#include <linux/kvm_host.h>
+
+void kvm_reset_coprocs(struct kvm_vcpu *vcpu);
+
+struct kvm_coproc_target_table {
+ unsigned target;
+ const struct coproc_reg *table;
+ size_t num;
+};
+void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table);
+
+int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
+
+unsigned long kvm_arm_num_guest_msrs(struct kvm_vcpu *vcpu);
+int kvm_arm_copy_msrindices(struct kvm_vcpu *vcpu, u64 __user *uindices);
+void kvm_coproc_table_init(void);
+
+struct kvm_one_reg;
+int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices);
+int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
+int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
+unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu);
+#endif /* __ARM_KVM_COPROC_H__ */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
new file mode 100644
index 0000000..fd61199
--- /dev/null
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_EMULATE_H__
+#define __ARM_KVM_EMULATE_H__
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmio.h>
+
+u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
+u32 *vcpu_spsr(struct kvm_vcpu *vcpu);
+
+int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run);
+void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr);
+void kvm_inject_undefined(struct kvm_vcpu *vcpu);
+void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
+void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
+
+static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu)
+{
+ return 1;
+}
+
+static inline u32 *vcpu_pc(struct kvm_vcpu *vcpu)
+{
+ return (u32 *)&vcpu->arch.regs.usr_regs.ARM_pc;
+}
+
+static inline u32 *vcpu_cpsr(struct kvm_vcpu *vcpu)
+{
+ return (u32 *)&vcpu->arch.regs.usr_regs.ARM_cpsr;
+}
+
+static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
+{
+ *vcpu_cpsr(vcpu) |= PSR_T_BIT;
+}
+
+static inline bool mode_has_spsr(struct kvm_vcpu *vcpu)
+{
+ unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+ return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE);
+}
+
+static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu)
+{
+ unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+ return cpsr_mode > USR_MODE;;
+}
+
+static inline bool kvm_vcpu_reg_is_pc(struct kvm_vcpu *vcpu, int reg)
+{
+ return reg == 15;
+}
+
+#endif /* __ARM_KVM_EMULATE_H__ */
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
new file mode 100644
index 0000000..98b4d1a
--- /dev/null
+++ b/arch/arm/include/asm/kvm_host.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_HOST_H__
+#define __ARM_KVM_HOST_H__
+
+#include <asm/kvm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmio.h>
+#include <asm/fpstate.h>
+
+#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
+#define KVM_MEMORY_SLOTS 32
+#define KVM_PRIVATE_MEM_SLOTS 4
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_HAVE_ONE_REG
+
+#define KVM_VCPU_MAX_FEATURES 1
+
+/* We don't currently support large pages. */
+#define KVM_HPAGE_GFN_SHIFT(x) 0
+#define KVM_NR_PAGE_SIZES 1
+#define KVM_PAGES_PER_HPAGE(x) (1UL<<31)
+
+struct kvm_vcpu;
+u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
+int kvm_target_cpu(void);
+int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
+void kvm_reset_coprocs(struct kvm_vcpu *vcpu);
+
+struct kvm_arch {
+ /* VTTBR value associated with below pgd and vmid */
+ u64 vttbr;
+
+ /*
+ * Anything that is not used directly from assembly code goes
+ * here.
+ */
+
+ /* The VMID generation used for the virt. memory system */
+ u64 vmid_gen;
+ u32 vmid;
+
+ /* Stage-2 page table */
+ pgd_t *pgd;
+};
+
+#define KVM_NR_MEM_OBJS 40
+
+/*
+ * We don't want allocation failures within the mmu code, so we preallocate
+ * enough memory for a single page fault in a cache.
+ */
+struct kvm_mmu_memory_cache {
+ int nobjs;
+ void *objects[KVM_NR_MEM_OBJS];
+};
+
+struct kvm_vcpu_arch {
+ struct kvm_regs regs;
+
+ int target; /* Processor target */
+ DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
+
+ /* System control coprocessor (cp15) */
+ u32 cp15[NR_CP15_REGS];
+
+ /* The CPU type we expose to the VM */
+ u32 midr;
+
+ /* Exception Information */
+ u32 hsr; /* Hyp Syndrome Register */
+ u32 hxfar; /* Hyp Data/Inst Fault Address Register */
+ u32 hpfar; /* Hyp IPA Fault Address Register */
+
+ /* Floating point registers (VFP and Advanced SIMD/NEON) */
+ struct vfp_hard_struct vfp_guest;
+ struct vfp_hard_struct *vfp_host;
+
+ /*
+ * Anything that is not used directly from assembly code goes
+ * here.
+ */
+ /* dcache set/way operation pending */
+ int last_pcpu;
+ cpumask_t require_dcache_flush;
+
+ /* Don't run the guest on this vcpu */
+ bool pause;
+
+ /* IO related fields */
+ struct kvm_decode mmio_decode;
+
+ /* Interrupt related fields */
+ u32 irq_lines; /* IRQ and FIQ levels */
+
+ /* Hyp exception information */
+ u32 hyp_pc; /* PC when exception was taken from Hyp mode */
+
+ /* Cache some mmu pages needed inside spinlock regions */
+ struct kvm_mmu_memory_cache mmu_page_cache;
+
+ /* Detect first run of a vcpu */
+ bool has_run_once;
+};
+
+struct kvm_vm_stat {
+ u32 remote_tlb_flush;
+};
+
+struct kvm_vcpu_stat {
+ u32 halt_wakeup;
+};
+
+struct kvm_vcpu_init;
+int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
+ const struct kvm_vcpu_init *init);
+unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
+int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
+struct kvm_one_reg;
+int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
+int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
+u64 kvm_call_hyp(void *hypfn, ...);
+void force_vm_exit(const cpumask_t *mask);
+
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+struct kvm;
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_unmap_hva_range(struct kvm *kvm,
+ unsigned long start, unsigned long end);
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
+
+unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
+int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
+
+/* We do not have shadow page tables, hence the empty hooks */
+static inline int kvm_age_hva(struct kvm *kvm, unsigned long hva)
+{
+ return 0;
+}
+
+static inline int kvm_test_age_hva(struct kvm *kvm, unsigned long hva)
+{
+ return 0;
+}
+#endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h
new file mode 100644
index 0000000..adcc0d7
--- /dev/null
+++ b/arch/arm/include/asm/kvm_mmio.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_MMIO_H__
+#define __ARM_KVM_MMIO_H__
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_arm.h>
+
+struct kvm_decode {
+ unsigned long rt;
+ bool sign_extend;
+};
+
+/*
+ * The in-kernel MMIO emulation code wants to use a copy of run->mmio,
+ * which is an anonymous type. Use our own type instead.
+ */
+struct kvm_exit_mmio {
+ phys_addr_t phys_addr;
+ u8 data[8];
+ u32 len;
+ bool is_write;
+};
+
+static inline void kvm_prepare_mmio(struct kvm_run *run,
+ struct kvm_exit_mmio *mmio)
+{
+ run->mmio.phys_addr = mmio->phys_addr;
+ run->mmio.len = mmio->len;
+ run->mmio.is_write = mmio->is_write;
+ memcpy(run->mmio.data, mmio->data, mmio->len);
+ run->exit_reason = KVM_EXIT_MMIO;
+}
+
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ phys_addr_t fault_ipa);
+
+#endif /* __ARM_KVM_MMIO_H__ */
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
new file mode 100644
index 0000000..421a20b
--- /dev/null
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_MMU_H__
+#define __ARM_KVM_MMU_H__
+
+int create_hyp_mappings(void *from, void *to);
+int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
+void free_hyp_pmds(void);
+
+int kvm_alloc_stage2_pgd(struct kvm *kvm);
+void kvm_free_stage2_pgd(struct kvm *kvm);
+int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
+ phys_addr_t pa, unsigned long size);
+
+int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
+
+void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
+
+phys_addr_t kvm_mmu_get_httbr(void);
+int kvm_mmu_init(void);
+void kvm_clear_hyp_idmap(void);
+
+static inline bool kvm_is_write_fault(unsigned long hsr)
+{
+ unsigned long hsr_ec = hsr >> HSR_EC_SHIFT;
+ if (hsr_ec == HSR_EC_IABT)
+ return false;
+ else if ((hsr & HSR_ISV) && !(hsr & HSR_WNR))
+ return false;
+ else
+ return true;
+}
+
+#endif /* __ARM_KVM_MMU_H__ */
diff --git a/arch/arm/include/asm/kvm_psci.h b/arch/arm/include/asm/kvm_psci.h
new file mode 100644
index 0000000..9a83d98
--- /dev/null
+++ b/arch/arm/include/asm/kvm_psci.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KVM_PSCI_H__
+#define __ARM_KVM_PSCI_H__
+
+bool kvm_psci_call(struct kvm_vcpu *vcpu);
+
+#endif /* __ARM_KVM_PSCI_H__ */
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index db9fedb..5cf2e97 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -23,6 +23,7 @@
#endif
struct pci_ops *ops;
int nr_controllers;
+ void **private_data;
int (*setup)(int nr, struct pci_sys_data *);
struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
void (*preinit)(void);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 1c4df27..64c770d 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -36,23 +36,23 @@
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
-#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
+#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)
/*
* The maximum size of a 26-bit user space task.
*/
-#define TASK_SIZE_26 UL(0x04000000)
+#define TASK_SIZE_26 (UL(1) << 26)
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
#ifndef CONFIG_THUMB2_KERNEL
-#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
+#define MODULES_VADDR (PAGE_OFFSET - SZ_16M)
#else
/* smaller range for Thumb-2 symbols relocation (2^24)*/
-#define MODULES_VADDR (PAGE_OFFSET - 8*1024*1024)
+#define MODULES_VADDR (PAGE_OFFSET - SZ_8M)
#endif
#if TASK_SIZE > MODULES_VADDR
diff --git a/arch/arm/include/asm/opcodes-sec.h b/arch/arm/include/asm/opcodes-sec.h
new file mode 100644
index 0000000..bc3a917
--- /dev/null
+++ b/arch/arm/include/asm/opcodes-sec.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#ifndef __ASM_ARM_OPCODES_SEC_H
+#define __ASM_ARM_OPCODES_SEC_H
+
+#include <asm/opcodes.h>
+
+#define __SMC(imm4) __inst_arm_thumb32( \
+ 0xE1600070 | (((imm4) & 0xF) << 0), \
+ 0xF7F08000 | (((imm4) & 0xF) << 16) \
+)
+
+#endif /* __ASM_ARM_OPCODES_SEC_H */
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
index 74e211a..e796c59 100644
--- a/arch/arm/include/asm/opcodes.h
+++ b/arch/arm/include/asm/opcodes.h
@@ -10,6 +10,7 @@
#define __ASM_ARM_OPCODES_H
#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
#endif
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 53426c6..12f71a1 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -92,6 +92,7 @@
static inline void outer_flush_all(void) { }
static inline void outer_inv_all(void) { }
static inline void outer_disable(void) { }
+static inline void outer_resume(void) { }
#endif
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index d795282..18f5cef 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -32,6 +32,9 @@
#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0)
#define PMD_BIT4 (_AT(pmdval_t, 0))
#define PMD_DOMAIN(x) (_AT(pmdval_t, 0))
+#define PMD_APTABLE_SHIFT (61)
+#define PMD_APTABLE (_AT(pgdval_t, 3) << PGD_APTABLE_SHIFT)
+#define PMD_PXNTABLE (_AT(pgdval_t, 1) << 59)
/*
* - section
@@ -41,9 +44,11 @@
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53)
#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0))
#define PMD_SECT_AP_READ (_AT(pmdval_t, 0))
+#define PMD_SECT_AP1 (_AT(pmdval_t, 1) << 6)
#define PMD_SECT_TEX(x) (_AT(pmdval_t, 0))
/*
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index a3f3792..6ef8afd 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -104,11 +104,29 @@
*/
#define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */
+/*
+ * 2nd stage PTE definitions for LPAE.
+ */
+#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
+#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */
+
+/*
+ * Hyp-mode PL2 PTE definitions for LPAE.
+ */
+#define L_PTE_HYP L_PTE_USER
+
#ifndef __ASSEMBLY__
#define pud_none(pud) (!pud_val(pud))
#define pud_bad(pud) (!(pud_val(pud) & 2))
#define pud_present(pud) (pud_val(pud))
+#define pmd_table(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \
+ PMD_TYPE_TABLE)
+#define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \
+ PMD_TYPE_SECT)
#define pud_clear(pudp) \
do { \
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9c82f988..f30ac3b 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -70,6 +70,9 @@
extern pgprot_t pgprot_user;
extern pgprot_t pgprot_kernel;
+extern pgprot_t pgprot_hyp_device;
+extern pgprot_t pgprot_s2;
+extern pgprot_t pgprot_s2_device;
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
@@ -82,6 +85,10 @@
#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
#define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN)
#define PAGE_KERNEL_EXEC pgprot_kernel
+#define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP)
+#define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP)
+#define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY)
+#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_USER | L_PTE_S2_RDONLY)
#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE)
#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
new file mode 100644
index 0000000..ce0dbe7
--- /dev/null
+++ b/arch/arm/include/asm/psci.h
@@ -0,0 +1,36 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#ifndef __ASM_ARM_PSCI_H
+#define __ASM_ARM_PSCI_H
+
+#define PSCI_POWER_STATE_TYPE_STANDBY 0
+#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1
+
+struct psci_power_state {
+ u16 id;
+ u8 type;
+ u8 affinity_level;
+};
+
+struct psci_operations {
+ int (*cpu_suspend)(struct psci_power_state state,
+ unsigned long entry_point);
+ int (*cpu_off)(struct psci_power_state state);
+ int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
+ int (*migrate)(unsigned long cpuid);
+};
+
+extern struct psci_operations psci_ops;
+
+#endif /* __ASM_ARM_PSCI_H */
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index b4ca707..6220e9f 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -119,22 +119,8 @@
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
- unsigned long tmp;
- u32 slock;
-
smp_mb();
-
- __asm__ __volatile__(
-" mov %1, #1\n"
-"1: ldrex %0, [%2]\n"
-" uadd16 %0, %0, %1\n"
-" strex %1, %0, [%2]\n"
-" teq %1, #0\n"
-" bne 1b"
- : "=&r" (slock), "=&r" (tmp)
- : "r" (&lock->slock)
- : "cc");
-
+ lock->tickets.owner++;
dsb_sev();
}
diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
index 86164df..50af92b 100644
--- a/arch/arm/include/asm/virt.h
+++ b/arch/arm/include/asm/virt.h
@@ -24,9 +24,9 @@
/*
* Flag indicating that the kernel was not entered in the same mode on every
* CPU. The zImage loader stashes this value in an SPSR, so we need an
- * architecturally defined flag bit here (the N flag, as it happens)
+ * architecturally defined flag bit here.
*/
-#define BOOT_CPU_MODE_MISMATCH (1<<31)
+#define BOOT_CPU_MODE_MISMATCH PSR_N_BIT
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
new file mode 100644
index 0000000..3303ff5
--- /dev/null
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_H__
+#define __ARM_KVM_H__
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
+
+#define KVM_REG_SIZE(id) \
+ (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+/* Valid for svc_regs, abt_regs, und_regs, irq_regs in struct kvm_regs */
+#define KVM_ARM_SVC_sp svc_regs[0]
+#define KVM_ARM_SVC_lr svc_regs[1]
+#define KVM_ARM_SVC_spsr svc_regs[2]
+#define KVM_ARM_ABT_sp abt_regs[0]
+#define KVM_ARM_ABT_lr abt_regs[1]
+#define KVM_ARM_ABT_spsr abt_regs[2]
+#define KVM_ARM_UND_sp und_regs[0]
+#define KVM_ARM_UND_lr und_regs[1]
+#define KVM_ARM_UND_spsr und_regs[2]
+#define KVM_ARM_IRQ_sp irq_regs[0]
+#define KVM_ARM_IRQ_lr irq_regs[1]
+#define KVM_ARM_IRQ_spsr irq_regs[2]
+
+/* Valid only for fiq_regs in struct kvm_regs */
+#define KVM_ARM_FIQ_r8 fiq_regs[0]
+#define KVM_ARM_FIQ_r9 fiq_regs[1]
+#define KVM_ARM_FIQ_r10 fiq_regs[2]
+#define KVM_ARM_FIQ_fp fiq_regs[3]
+#define KVM_ARM_FIQ_ip fiq_regs[4]
+#define KVM_ARM_FIQ_sp fiq_regs[5]
+#define KVM_ARM_FIQ_lr fiq_regs[6]
+#define KVM_ARM_FIQ_spsr fiq_regs[7]
+
+struct kvm_regs {
+ struct pt_regs usr_regs;/* R0_usr - R14_usr, PC, CPSR */
+ __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */
+ __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */
+ __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */
+ __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */
+ __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */
+};
+
+/* Supported Processor Types */
+#define KVM_ARM_TARGET_CORTEX_A15 0
+#define KVM_ARM_NUM_TARGETS 1
+
+#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
+
+struct kvm_vcpu_init {
+ __u32 target;
+ __u32 features[7];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+struct kvm_guest_debug_arch {
+};
+
+struct kvm_debug_exit_arch {
+};
+
+struct kvm_sync_regs {
+};
+
+struct kvm_arch_memory_slot {
+};
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000
+#define KVM_REG_ARM_COPROC_SHIFT 16
+#define KVM_REG_ARM_32_OPC2_MASK 0x0000000000000007
+#define KVM_REG_ARM_32_OPC2_SHIFT 0
+#define KVM_REG_ARM_OPC1_MASK 0x0000000000000078
+#define KVM_REG_ARM_OPC1_SHIFT 3
+#define KVM_REG_ARM_CRM_MASK 0x0000000000000780
+#define KVM_REG_ARM_CRM_SHIFT 7
+#define KVM_REG_ARM_32_CRN_MASK 0x0000000000007800
+#define KVM_REG_ARM_32_CRN_SHIFT 11
+
+/* Normal registers are mapped as coprocessor 16. */
+#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4)
+
+/* Some registers need more space to represent values. */
+#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00
+#define KVM_REG_ARM_DEMUX_ID_SHIFT 8
+#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
+#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF
+#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0
+
+/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */
+#define KVM_REG_ARM_VFP (0x0012 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_VFP_MASK 0x000000000000FFFF
+#define KVM_REG_ARM_VFP_BASE_REG 0x0
+#define KVM_REG_ARM_VFP_FPSID 0x1000
+#define KVM_REG_ARM_VFP_FPSCR 0x1001
+#define KVM_REG_ARM_VFP_MVFR1 0x1006
+#define KVM_REG_ARM_VFP_MVFR0 0x1007
+#define KVM_REG_ARM_VFP_FPEXC 0x1008
+#define KVM_REG_ARM_VFP_FPINST 0x1009
+#define KVM_REG_ARM_VFP_FPINST2 0x100A
+
+
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_TYPE_SHIFT 24
+#define KVM_ARM_IRQ_TYPE_MASK 0xff
+#define KVM_ARM_IRQ_VCPU_SHIFT 16
+#define KVM_ARM_IRQ_VCPU_MASK 0xff
+#define KVM_ARM_IRQ_NUM_SHIFT 0
+#define KVM_ARM_IRQ_NUM_MASK 0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU 0
+#define KVM_ARM_IRQ_TYPE_SPI 1
+#define KVM_ARM_IRQ_TYPE_PPI 2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ 0
+#define KVM_ARM_IRQ_CPU_FIQ 1
+
+/* Highest supported SPI, from VGIC_NR_IRQS */
+#define KVM_ARM_IRQ_GIC_MAX 127
+
+/* PSCI interface */
+#define KVM_PSCI_FN_BASE 0x95c1ba5e
+#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n))
+
+#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0)
+#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1)
+#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2)
+#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3)
+
+#define KVM_PSCI_RET_SUCCESS 0
+#define KVM_PSCI_RET_NI ((unsigned long)-1)
+#define KVM_PSCI_RET_INVAL ((unsigned long)-2)
+#define KVM_PSCI_RET_DENIED ((unsigned long)-3)
+
+#endif /* __ARM_KVM_H__ */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5bbec7b..5f3338e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -82,5 +82,6 @@
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o
+obj-$(CONFIG_ARM_PSCI) += psci.o
extra-y := $(head-y) vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index c985b48..c8b3272 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -13,6 +13,9 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#ifdef CONFIG_KVM_ARM_HOST
+#include <linux/kvm_host.h>
+#endif
#include <asm/cacheflush.h>
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
@@ -146,5 +149,27 @@
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
+#ifdef CONFIG_KVM_ARM_HOST
+ DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm));
+ DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr));
+ DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15));
+ DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest));
+ DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.vfp_host));
+ DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs));
+ DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs));
+ DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs));
+ DEFINE(VCPU_ABT_REGS, offsetof(struct kvm_vcpu, arch.regs.abt_regs));
+ DEFINE(VCPU_UND_REGS, offsetof(struct kvm_vcpu, arch.regs.und_regs));
+ DEFINE(VCPU_IRQ_REGS, offsetof(struct kvm_vcpu, arch.regs.irq_regs));
+ DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu, arch.regs.fiq_regs));
+ DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc));
+ DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr));
+ DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines));
+ DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.hsr));
+ DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.hxfar));
+ DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.hpfar));
+ DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.hyp_pc));
+ DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr));
+#endif
return 0;
}
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 379cf32..a1f73b5 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -413,7 +413,7 @@
return irq;
}
-static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
{
int ret;
struct pci_host_bridge_window *window;
@@ -445,7 +445,7 @@
return 0;
}
-static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
+static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
{
struct pci_sys_data *sys = NULL;
int ret;
@@ -464,6 +464,9 @@
sys->map_irq = hw->map_irq;
INIT_LIST_HEAD(&sys->resources);
+ if (hw->private_data)
+ sys->private_data = hw->private_data[nr];
+
ret = hw->setup(nr, sys);
if (ret > 0) {
@@ -493,7 +496,7 @@
}
}
-void __init pci_common_init(struct hw_pci *hw)
+void pci_common_init(struct hw_pci *hw)
{
struct pci_sys_data *sys;
LIST_HEAD(head);
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 5ff2e77..5eae53e 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -28,6 +28,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
@@ -35,6 +36,7 @@
#include <asm/hw_breakpoint.h>
#include <asm/kdebug.h>
#include <asm/traps.h>
+#include <asm/hardware/coresight.h>
/* Breakpoint currently in use for each BRP. */
static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
@@ -49,6 +51,9 @@
/* Debug architecture version. */
static u8 debug_arch;
+/* Does debug architecture support OS Save and Restore? */
+static bool has_ossr;
+
/* Maximum supported watchpoint length. */
static u8 max_watchpoint_len;
@@ -903,6 +908,23 @@
.fn = debug_reg_trap,
};
+/* Does this core support OS Save and Restore? */
+static bool core_has_os_save_restore(void)
+{
+ u32 oslsr;
+
+ switch (get_debug_arch()) {
+ case ARM_DEBUG_ARCH_V7_1:
+ return true;
+ case ARM_DEBUG_ARCH_V7_ECP14:
+ ARM_DBG_READ(c1, c1, 4, oslsr);
+ if (oslsr & ARM_OSLSR_OSLM0)
+ return true;
+ default:
+ return false;
+ }
+}
+
static void reset_ctrl_regs(void *unused)
{
int i, raw_num_brps, err = 0, cpu = smp_processor_id();
@@ -930,11 +952,7 @@
if ((val & 0x1) == 0)
err = -EPERM;
- /*
- * Check whether we implement OS save and restore.
- */
- ARM_DBG_READ(c1, c1, 4, val);
- if ((val & 0x9) == 0)
+ if (!has_ossr)
goto clear_vcr;
break;
case ARM_DEBUG_ARCH_V7_1:
@@ -955,9 +973,9 @@
/*
* Unconditionally clear the OS lock by writing a value
- * other than 0xC5ACCE55 to the access register.
+ * other than CS_LAR_KEY to the access register.
*/
- ARM_DBG_WRITE(c1, c0, 4, 0);
+ ARM_DBG_WRITE(c1, c0, 4, ~CS_LAR_KEY);
isb();
/*
@@ -1015,6 +1033,30 @@
.notifier_call = dbg_reset_notify,
};
+#ifdef CONFIG_CPU_PM
+static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action,
+ void *v)
+{
+ if (action == CPU_PM_EXIT)
+ reset_ctrl_regs(NULL);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = {
+ .notifier_call = dbg_cpu_pm_notify,
+};
+
+static void __init pm_init(void)
+{
+ cpu_pm_register_notifier(&dbg_cpu_pm_nb);
+}
+#else
+static inline void pm_init(void)
+{
+}
+#endif
+
static int __init arch_hw_breakpoint_init(void)
{
debug_arch = get_debug_arch();
@@ -1024,6 +1066,8 @@
return 0;
}
+ has_ossr = core_has_os_save_restore();
+
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
core_num_wrps = get_num_wrps();
@@ -1062,8 +1106,9 @@
hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
TRAP_HWBKPT, "breakpoint debug exception");
- /* Register hotplug notifier. */
+ /* Register hotplug and PM notifiers. */
register_cpu_notifier(&dbg_reset_nb);
+ pm_init();
return 0;
}
arch_initcall(arch_hw_breakpoint_init);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index f9e8657..31e0eb3 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -149,12 +149,6 @@
static void
armpmu_read(struct perf_event *event)
{
- struct hw_perf_event *hwc = &event->hw;
-
- /* Don't read disabled counters! */
- if (hwc->idx < 0)
- return;
-
armpmu_event_update(event);
}
@@ -207,8 +201,6 @@
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
- WARN_ON(idx < 0);
-
armpmu_stop(event, PERF_EF_UPDATE);
hw_events->events[idx] = NULL;
clear_bit(idx, hw_events->used_mask);
@@ -358,7 +350,7 @@
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- int mapping, err;
+ int mapping;
mapping = armpmu->map_event(event);
@@ -407,14 +399,12 @@
local64_set(&hwc->period_left, hwc->sample_period);
}
- err = 0;
if (event->group_leader != event) {
- err = validate_group(event);
- if (err)
+ if (validate_group(event) != 0);
return -EINVAL;
}
- return err;
+ return 0;
}
static int armpmu_event_init(struct perf_event *event)
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 5f66206..1f2740e 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -147,7 +147,7 @@
cpu_pmu->free_irq = cpu_pmu_free_irq;
/* Ensure the PMU has sane values out of reset. */
- if (cpu_pmu && cpu_pmu->reset)
+ if (cpu_pmu->reset)
on_each_cpu(cpu_pmu->reset, cpu_pmu, 1);
}
@@ -201,48 +201,46 @@
static int probe_current_pmu(struct arm_pmu *pmu)
{
int cpu = get_cpu();
- unsigned long cpuid = read_cpuid_id();
- unsigned long implementor = (cpuid & 0xFF000000) >> 24;
- unsigned long part_number = (cpuid & 0xFFF0);
+ unsigned long implementor = read_cpuid_implementor();
+ unsigned long part_number = read_cpuid_part_number();
int ret = -ENODEV;
pr_info("probing PMU on CPU %d\n", cpu);
/* ARM Ltd CPUs. */
- if (0x41 == implementor) {
+ if (implementor == ARM_CPU_IMP_ARM) {
switch (part_number) {
- case 0xB360: /* ARM1136 */
- case 0xB560: /* ARM1156 */
- case 0xB760: /* ARM1176 */
+ case ARM_CPU_PART_ARM1136:
+ case ARM_CPU_PART_ARM1156:
+ case ARM_CPU_PART_ARM1176:
ret = armv6pmu_init(pmu);
break;
- case 0xB020: /* ARM11mpcore */
+ case ARM_CPU_PART_ARM11MPCORE:
ret = armv6mpcore_pmu_init(pmu);
break;
- case 0xC080: /* Cortex-A8 */
+ case ARM_CPU_PART_CORTEX_A8:
ret = armv7_a8_pmu_init(pmu);
break;
- case 0xC090: /* Cortex-A9 */
+ case ARM_CPU_PART_CORTEX_A9:
ret = armv7_a9_pmu_init(pmu);
break;
- case 0xC050: /* Cortex-A5 */
+ case ARM_CPU_PART_CORTEX_A5:
ret = armv7_a5_pmu_init(pmu);
break;
- case 0xC0F0: /* Cortex-A15 */
+ case ARM_CPU_PART_CORTEX_A15:
ret = armv7_a15_pmu_init(pmu);
break;
- case 0xC070: /* Cortex-A7 */
+ case ARM_CPU_PART_CORTEX_A7:
ret = armv7_a7_pmu_init(pmu);
break;
}
/* Intel CPUs [xscale]. */
- } else if (0x69 == implementor) {
- part_number = (cpuid >> 13) & 0x7;
- switch (part_number) {
- case 1:
+ } else if (implementor == ARM_CPU_IMP_INTEL) {
+ switch (xscale_cpu_arch_version()) {
+ case ARM_CPU_XSCALE_ARCH_V1:
ret = xscale1pmu_init(pmu);
break;
- case 2:
+ case ARM_CPU_XSCALE_ARCH_V2:
ret = xscale2pmu_init(pmu);
break;
}
@@ -279,17 +277,22 @@
}
if (ret) {
- pr_info("failed to register PMU devices!");
- kfree(pmu);
- return ret;
+ pr_info("failed to probe PMU!");
+ goto out_free;
}
cpu_pmu = pmu;
cpu_pmu->plat_device = pdev;
cpu_pmu_init(cpu_pmu);
- armpmu_register(cpu_pmu, PERF_TYPE_RAW);
+ ret = armpmu_register(cpu_pmu, PERF_TYPE_RAW);
- return 0;
+ if (!ret)
+ return 0;
+
+out_free:
+ pr_info("failed to register PMU devices!");
+ kfree(pmu);
+ return ret;
}
static struct platform_driver cpu_pmu_driver = {
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 041d052..03664b0 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -106,7 +106,7 @@
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -259,7 +259,7 @@
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4fbc757..8c79a9e 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -157,8 +157,8 @@
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -282,7 +282,7 @@
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -399,8 +399,8 @@
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
/*
* The prefetch counters don't differentiate between the I
@@ -527,8 +527,8 @@
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -651,8 +651,8 @@
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 2b0fe30..63990c4 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -83,7 +83,7 @@
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c6dec5f..047d3e4 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -172,14 +172,9 @@
local_irq_enable();
}
-void (*pm_idle)(void) = default_idle;
-EXPORT_SYMBOL(pm_idle);
-
/*
- * The idle thread, has rather strange semantics for calling pm_idle,
- * but this is what x86 does and we need to do the same, so that
- * things like cpuidle get called in the same way. The only difference
- * is that we always respect 'hlt_counter' to prevent low power idle.
+ * The idle thread.
+ * We always respect 'hlt_counter' to prevent low power idle.
*/
void cpu_idle(void)
{
@@ -210,10 +205,10 @@
} else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
- pm_idle();
+ default_idle();
start_critical_timings();
/*
- * pm_idle functions must always
+ * default_idle functions must always
* return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
new file mode 100644
index 0000000..3653164
--- /dev/null
+++ b/arch/arm/kernel/psci.c
@@ -0,0 +1,211 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define pr_fmt(fmt) "psci: " fmt
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+#include <asm/compiler.h>
+#include <asm/errno.h>
+#include <asm/opcodes-sec.h>
+#include <asm/opcodes-virt.h>
+#include <asm/psci.h>
+
+struct psci_operations psci_ops;
+
+static int (*invoke_psci_fn)(u32, u32, u32, u32);
+
+enum psci_function {
+ PSCI_FN_CPU_SUSPEND,
+ PSCI_FN_CPU_ON,
+ PSCI_FN_CPU_OFF,
+ PSCI_FN_MIGRATE,
+ PSCI_FN_MAX,
+};
+
+static u32 psci_function_id[PSCI_FN_MAX];
+
+#define PSCI_RET_SUCCESS 0
+#define PSCI_RET_EOPNOTSUPP -1
+#define PSCI_RET_EINVAL -2
+#define PSCI_RET_EPERM -3
+
+static int psci_to_linux_errno(int errno)
+{
+ switch (errno) {
+ case PSCI_RET_SUCCESS:
+ return 0;
+ case PSCI_RET_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case PSCI_RET_EINVAL:
+ return -EINVAL;
+ case PSCI_RET_EPERM:
+ return -EPERM;
+ };
+
+ return -EINVAL;
+}
+
+#define PSCI_POWER_STATE_ID_MASK 0xffff
+#define PSCI_POWER_STATE_ID_SHIFT 0
+#define PSCI_POWER_STATE_TYPE_MASK 0x1
+#define PSCI_POWER_STATE_TYPE_SHIFT 16
+#define PSCI_POWER_STATE_AFFL_MASK 0x3
+#define PSCI_POWER_STATE_AFFL_SHIFT 24
+
+static u32 psci_power_state_pack(struct psci_power_state state)
+{
+ return ((state.id & PSCI_POWER_STATE_ID_MASK)
+ << PSCI_POWER_STATE_ID_SHIFT) |
+ ((state.type & PSCI_POWER_STATE_TYPE_MASK)
+ << PSCI_POWER_STATE_TYPE_SHIFT) |
+ ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK)
+ << PSCI_POWER_STATE_AFFL_SHIFT);
+}
+
+/*
+ * The following two functions are invoked via the invoke_psci_fn pointer
+ * and will not be inlined, allowing us to piggyback on the AAPCS.
+ */
+static noinline int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1,
+ u32 arg2)
+{
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r2")
+ __asmeq("%3", "r3")
+ __HVC(0)
+ : "+r" (function_id)
+ : "r" (arg0), "r" (arg1), "r" (arg2));
+
+ return function_id;
+}
+
+static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1,
+ u32 arg2)
+{
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r2")
+ __asmeq("%3", "r3")
+ __SMC(0)
+ : "+r" (function_id)
+ : "r" (arg0), "r" (arg1), "r" (arg2));
+
+ return function_id;
+}
+
+static int psci_cpu_suspend(struct psci_power_state state,
+ unsigned long entry_point)
+{
+ int err;
+ u32 fn, power_state;
+
+ fn = psci_function_id[PSCI_FN_CPU_SUSPEND];
+ power_state = psci_power_state_pack(state);
+ err = invoke_psci_fn(fn, power_state, entry_point, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_off(struct psci_power_state state)
+{
+ int err;
+ u32 fn, power_state;
+
+ fn = psci_function_id[PSCI_FN_CPU_OFF];
+ power_state = psci_power_state_pack(state);
+ err = invoke_psci_fn(fn, power_state, 0, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point)
+{
+ int err;
+ u32 fn;
+
+ fn = psci_function_id[PSCI_FN_CPU_ON];
+ err = invoke_psci_fn(fn, cpuid, entry_point, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_migrate(unsigned long cpuid)
+{
+ int err;
+ u32 fn;
+
+ fn = psci_function_id[PSCI_FN_MIGRATE];
+ err = invoke_psci_fn(fn, cpuid, 0, 0);
+ return psci_to_linux_errno(err);
+}
+
+static const struct of_device_id psci_of_match[] __initconst = {
+ { .compatible = "arm,psci", },
+ {},
+};
+
+static int __init psci_init(void)
+{
+ struct device_node *np;
+ const char *method;
+ u32 id;
+
+ np = of_find_matching_node(NULL, psci_of_match);
+ if (!np)
+ return 0;
+
+ pr_info("probing function IDs from device-tree\n");
+
+ if (of_property_read_string(np, "method", &method)) {
+ pr_warning("missing \"method\" property\n");
+ goto out_put_node;
+ }
+
+ if (!strcmp("hvc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_hvc;
+ } else if (!strcmp("smc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_smc;
+ } else {
+ pr_warning("invalid \"method\" property: %s\n", method);
+ goto out_put_node;
+ }
+
+ if (!of_property_read_u32(np, "cpu_suspend", &id)) {
+ psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
+ psci_ops.cpu_suspend = psci_cpu_suspend;
+ }
+
+ if (!of_property_read_u32(np, "cpu_off", &id)) {
+ psci_function_id[PSCI_FN_CPU_OFF] = id;
+ psci_ops.cpu_off = psci_cpu_off;
+ }
+
+ if (!of_property_read_u32(np, "cpu_on", &id)) {
+ psci_function_id[PSCI_FN_CPU_ON] = id;
+ psci_ops.cpu_on = psci_cpu_on;
+ }
+
+ if (!of_property_read_u32(np, "migrate", &id)) {
+ psci_function_id[PSCI_FN_MIGRATE] = id;
+ psci_ops.migrate = psci_migrate;
+ }
+
+out_put_node:
+ of_node_put(np);
+ return 0;
+}
+early_initcall(psci_init);
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index fc6692e..bd6f56b 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -93,11 +93,11 @@
* detectable in cyc_to_fixed_sched_clock().
*/
raw_local_irq_save(flags);
- cd.epoch_cyc = cyc;
+ cd.epoch_cyc_copy = cyc;
smp_wmb();
cd.epoch_ns = ns;
smp_wmb();
- cd.epoch_cyc_copy = cyc;
+ cd.epoch_cyc = cyc;
raw_local_irq_restore(flags);
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 84f4cbf..365c8d9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -125,18 +125,6 @@
smp_ops.smp_init_cpus();
}
-static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
- if (smp_ops.smp_prepare_cpus)
- smp_ops.smp_prepare_cpus(max_cpus);
-}
-
-static void __cpuinit platform_secondary_init(unsigned int cpu)
-{
- if (smp_ops.smp_secondary_init)
- smp_ops.smp_secondary_init(cpu);
-}
-
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
if (smp_ops.smp_boot_secondary)
@@ -154,12 +142,6 @@
return 1;
}
-static void platform_cpu_die(unsigned int cpu)
-{
- if (smp_ops.cpu_die)
- smp_ops.cpu_die(cpu);
-}
-
static int platform_cpu_disable(unsigned int cpu)
{
if (smp_ops.cpu_disable)
@@ -257,7 +239,8 @@
* actual CPU shutdown procedure is at least platform (if not
* CPU) specific.
*/
- platform_cpu_die(cpu);
+ if (smp_ops.cpu_die)
+ smp_ops.cpu_die(cpu);
/*
* Do not return to the idle loop - jump back to the secondary
@@ -324,7 +307,8 @@
/*
* Give the platform a chance to do its own initialisation.
*/
- platform_secondary_init(cpu);
+ if (smp_ops.smp_secondary_init)
+ smp_ops.smp_secondary_init(cpu);
notify_cpu_starting(cpu);
@@ -399,8 +383,8 @@
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time. A platform should
- * re-initialize the map in platform_smp_prepare_cpus() if
- * present != possible (e.g. physical hotplug).
+ * re-initialize the map in the platforms smp_prepare_cpus()
+ * if present != possible (e.g. physical hotplug).
*/
init_cpu_present(cpu_possible_mask);
@@ -408,7 +392,8 @@
* Initialise the SCU if there are more than one CPU
* and let them know where to start.
*/
- platform_smp_prepare_cpus(max_cpus);
+ if (smp_ops.smp_prepare_cpus)
+ smp_ops.smp_prepare_cpus(max_cpus);
}
}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 49f335d..ae0c7bb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -31,7 +31,6 @@
static struct clk *twd_clk;
static unsigned long twd_timer_rate;
-static bool common_setup_called;
static DEFINE_PER_CPU(bool, percpu_setup_called);
static struct clock_event_device __percpu **twd_evt;
@@ -239,25 +238,28 @@
return IRQ_NONE;
}
-static struct clk *twd_get_clock(void)
+static void twd_get_clock(struct device_node *np)
{
- struct clk *clk;
int err;
- clk = clk_get_sys("smp_twd", NULL);
- if (IS_ERR(clk)) {
- pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
- return clk;
+ if (np)
+ twd_clk = of_clk_get(np, 0);
+ else
+ twd_clk = clk_get_sys("smp_twd", NULL);
+
+ if (IS_ERR(twd_clk)) {
+ pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk));
+ return;
}
- err = clk_prepare_enable(clk);
+ err = clk_prepare_enable(twd_clk);
if (err) {
pr_err("smp_twd: clock failed to prepare+enable: %d\n", err);
- clk_put(clk);
- return ERR_PTR(err);
+ clk_put(twd_clk);
+ return;
}
- return clk;
+ twd_timer_rate = clk_get_rate(twd_clk);
}
/*
@@ -280,26 +282,7 @@
}
per_cpu(percpu_setup_called, cpu) = true;
- /*
- * This stuff only need to be done once for the entire TWD cluster
- * during the runtime of the system.
- */
- if (!common_setup_called) {
- twd_clk = twd_get_clock();
-
- /*
- * We use IS_ERR_OR_NULL() here, because if the clock stubs
- * are active we will get a valid clk reference which is
- * however NULL and will return the rate 0. In that case we
- * need to calibrate the rate instead.
- */
- if (!IS_ERR_OR_NULL(twd_clk))
- twd_timer_rate = clk_get_rate(twd_clk);
- else
- twd_calibrate_rate();
-
- common_setup_called = true;
- }
+ twd_calibrate_rate();
/*
* The following is done once per CPU the first time .setup() is
@@ -330,7 +313,7 @@
.stop = twd_timer_stop,
};
-static int __init twd_local_timer_common_register(void)
+static int __init twd_local_timer_common_register(struct device_node *np)
{
int err;
@@ -350,6 +333,8 @@
if (err)
goto out_irq;
+ twd_get_clock(np);
+
return 0;
out_irq:
@@ -373,7 +358,7 @@
if (!twd_base)
return -ENOMEM;
- return twd_local_timer_common_register();
+ return twd_local_timer_common_register(NULL);
}
#ifdef CONFIG_OF
@@ -405,7 +390,7 @@
goto out;
}
- err = twd_local_timer_common_register();
+ err = twd_local_timer_common_register(np);
out:
WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 11c1785..b571484 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -19,7 +19,11 @@
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__idmap_text_start) = .; \
*(.idmap.text) \
- VMLINUX_SYMBOL(__idmap_text_end) = .;
+ VMLINUX_SYMBOL(__idmap_text_end) = .; \
+ ALIGN_FUNCTION(); \
+ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
+ *(.hyp.idmap.text) \
+ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .;
#ifdef CONFIG_HOTPLUG_CPU
#define ARM_CPU_DISCARD(x)
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
new file mode 100644
index 0000000..05227cb
--- /dev/null
+++ b/arch/arm/kvm/Kconfig
@@ -0,0 +1,56 @@
+#
+# KVM configuration
+#
+
+source "virt/kvm/Kconfig"
+
+menuconfig VIRTUALIZATION
+ bool "Virtualization"
+ ---help---
+ Say Y here to get to see options for using your Linux host to run
+ other operating systems inside virtual machines (guests).
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled.
+
+if VIRTUALIZATION
+
+config KVM
+ bool "Kernel-based Virtual Machine (KVM) support"
+ select PREEMPT_NOTIFIERS
+ select ANON_INODES
+ select KVM_MMIO
+ select KVM_ARM_HOST
+ depends on ARM_VIRT_EXT && ARM_LPAE
+ ---help---
+ Support hosting virtualized guest machines. You will also
+ need to select one or more of the processor modules below.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ If unsure, say N.
+
+config KVM_ARM_HOST
+ bool "KVM host support for ARM cpus."
+ depends on KVM
+ depends on MMU
+ select MMU_NOTIFIER
+ ---help---
+ Provides host support for ARM processors.
+
+config KVM_ARM_MAX_VCPUS
+ int "Number maximum supported virtual CPUs per VM"
+ depends on KVM_ARM_HOST
+ default 4
+ help
+ Static number of max supported virtual CPUs per VM.
+
+ If you choose a high number, the vcpu structures will be quite
+ large, so only choose a reasonable number that you expect to
+ actually use.
+
+source drivers/virtio/Kconfig
+
+endif # VIRTUALIZATION
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
new file mode 100644
index 0000000..ea27987
--- /dev/null
+++ b/arch/arm/kvm/Makefile
@@ -0,0 +1,21 @@
+#
+# Makefile for Kernel-based Virtual Machine module
+#
+
+plus_virt := $(call as-instr,.arch_extension virt,+virt)
+ifeq ($(plus_virt),+virt)
+ plus_virt_def := -DREQUIRES_VIRT=1
+endif
+
+ccflags-y += -Ivirt/kvm -Iarch/arm/kvm
+CFLAGS_arm.o := -I. $(plus_virt_def)
+CFLAGS_mmu.o := -I.
+
+AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt)
+AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)
+
+kvm-arm-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
+
+obj-y += kvm-arm.o init.o interrupts.o
+obj-y += arm.o guest.o mmu.o emulate.o reset.o
+obj-y += coproc.o coproc_a15.o mmio.o psci.o
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
new file mode 100644
index 0000000..2d30e3a
--- /dev/null
+++ b/arch/arm/kvm/arm.c
@@ -0,0 +1,1015 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kvm_host.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/mman.h>
+#include <linux/sched.h>
+#include <linux/kvm.h>
+#include <trace/events/kvm.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+#include <asm/unified.h>
+#include <asm/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/mman.h>
+#include <asm/cputype.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/virt.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_coproc.h>
+#include <asm/kvm_psci.h>
+#include <asm/opcodes.h>
+
+#ifdef REQUIRES_VIRT
+__asm__(".arch_extension virt");
+#endif
+
+static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
+static struct vfp_hard_struct __percpu *kvm_host_vfp_state;
+static unsigned long hyp_default_vectors;
+
+/* The VMID used in the VTTBR */
+static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
+static u8 kvm_next_vmid;
+static DEFINE_SPINLOCK(kvm_vmid_lock);
+
+int kvm_arch_hardware_enable(void *garbage)
+{
+ return 0;
+}
+
+int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
+{
+ return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
+}
+
+void kvm_arch_hardware_disable(void *garbage)
+{
+}
+
+int kvm_arch_hardware_setup(void)
+{
+ return 0;
+}
+
+void kvm_arch_hardware_unsetup(void)
+{
+}
+
+void kvm_arch_check_processor_compat(void *rtn)
+{
+ *(int *)rtn = 0;
+}
+
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
+/**
+ * kvm_arch_init_vm - initializes a VM data structure
+ * @kvm: pointer to the KVM struct
+ */
+int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
+{
+ int ret = 0;
+
+ if (type)
+ return -EINVAL;
+
+ ret = kvm_alloc_stage2_pgd(kvm);
+ if (ret)
+ goto out_fail_alloc;
+
+ ret = create_hyp_mappings(kvm, kvm + 1);
+ if (ret)
+ goto out_free_stage2_pgd;
+
+ /* Mark the initial VMID generation invalid */
+ kvm->arch.vmid_gen = 0;
+
+ return ret;
+out_free_stage2_pgd:
+ kvm_free_stage2_pgd(kvm);
+out_fail_alloc:
+ return ret;
+}
+
+int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
+{
+ return VM_FAULT_SIGBUS;
+}
+
+void kvm_arch_free_memslot(struct kvm_memory_slot *free,
+ struct kvm_memory_slot *dont)
+{
+}
+
+int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
+{
+ return 0;
+}
+
+/**
+ * kvm_arch_destroy_vm - destroy the VM data structure
+ * @kvm: pointer to the KVM struct
+ */
+void kvm_arch_destroy_vm(struct kvm *kvm)
+{
+ int i;
+
+ kvm_free_stage2_pgd(kvm);
+
+ for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+ if (kvm->vcpus[i]) {
+ kvm_arch_vcpu_free(kvm->vcpus[i]);
+ kvm->vcpus[i] = NULL;
+ }
+ }
+}
+
+int kvm_dev_ioctl_check_extension(long ext)
+{
+ int r;
+ switch (ext) {
+ case KVM_CAP_USER_MEMORY:
+ case KVM_CAP_SYNC_MMU:
+ case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+ case KVM_CAP_ONE_REG:
+ case KVM_CAP_ARM_PSCI:
+ r = 1;
+ break;
+ case KVM_CAP_COALESCED_MMIO:
+ r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+ break;
+ case KVM_CAP_NR_VCPUS:
+ r = num_online_cpus();
+ break;
+ case KVM_CAP_MAX_VCPUS:
+ r = KVM_MAX_VCPUS;
+ break;
+ default:
+ r = 0;
+ break;
+ }
+ return r;
+}
+
+long kvm_arch_dev_ioctl(struct file *filp,
+ unsigned int ioctl, unsigned long arg)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_set_memory_region(struct kvm *kvm,
+ struct kvm_userspace_memory_region *mem,
+ struct kvm_memory_slot old,
+ int user_alloc)
+{
+ return 0;
+}
+
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+ struct kvm_memory_slot *memslot,
+ struct kvm_memory_slot old,
+ struct kvm_userspace_memory_region *mem,
+ int user_alloc)
+{
+ return 0;
+}
+
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+ struct kvm_userspace_memory_region *mem,
+ struct kvm_memory_slot old,
+ int user_alloc)
+{
+}
+
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
+{
+}
+
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+ struct kvm_memory_slot *slot)
+{
+}
+
+struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
+{
+ int err;
+ struct kvm_vcpu *vcpu;
+
+ vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
+ if (!vcpu) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = kvm_vcpu_init(vcpu, kvm, id);
+ if (err)
+ goto free_vcpu;
+
+ err = create_hyp_mappings(vcpu, vcpu + 1);
+ if (err)
+ goto vcpu_uninit;
+
+ return vcpu;
+vcpu_uninit:
+ kvm_vcpu_uninit(vcpu);
+free_vcpu:
+ kmem_cache_free(kvm_vcpu_cache, vcpu);
+out:
+ return ERR_PTR(err);
+}
+
+int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
+{
+ kvm_mmu_free_memory_caches(vcpu);
+ kmem_cache_free(kvm_vcpu_cache, vcpu);
+}
+
+void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+ kvm_arch_vcpu_free(vcpu);
+}
+
+int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+int __attribute_const__ kvm_target_cpu(void)
+{
+ unsigned long implementor = read_cpuid_implementor();
+ unsigned long part_number = read_cpuid_part_number();
+
+ if (implementor != ARM_CPU_IMP_ARM)
+ return -EINVAL;
+
+ switch (part_number) {
+ case ARM_CPU_PART_CORTEX_A15:
+ return KVM_ARM_TARGET_CORTEX_A15;
+ default:
+ return -EINVAL;
+ }
+}
+
+int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
+{
+ /* Force users to call KVM_ARM_VCPU_INIT */
+ vcpu->arch.target = -1;
+ return 0;
+}
+
+void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+ vcpu->cpu = cpu;
+ vcpu->arch.vfp_host = this_cpu_ptr(kvm_host_vfp_state);
+
+ /*
+ * Check whether this vcpu requires the cache to be flushed on
+ * this physical CPU. This is a consequence of doing dcache
+ * operations by set/way on this vcpu. We do it here to be in
+ * a non-preemptible section.
+ */
+ if (cpumask_test_and_clear_cpu(cpu, &vcpu->arch.require_dcache_flush))
+ flush_cache_all(); /* We'd really want v7_flush_dcache_all() */
+}
+
+void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
+{
+}
+
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+ struct kvm_guest_debug *dbg)
+{
+ return -EINVAL;
+}
+
+
+int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
+ struct kvm_mp_state *mp_state)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
+ struct kvm_mp_state *mp_state)
+{
+ return -EINVAL;
+}
+
+/**
+ * kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled
+ * @v: The VCPU pointer
+ *
+ * If the guest CPU is not waiting for interrupts or an interrupt line is
+ * asserted, the CPU is by definition runnable.
+ */
+int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
+{
+ return !!v->arch.irq_lines;
+}
+
+/* Just ensure a guest exit from a particular CPU */
+static void exit_vm_noop(void *info)
+{
+}
+
+void force_vm_exit(const cpumask_t *mask)
+{
+ smp_call_function_many(mask, exit_vm_noop, NULL, true);
+}
+
+/**
+ * need_new_vmid_gen - check that the VMID is still valid
+ * @kvm: The VM's VMID to checkt
+ *
+ * return true if there is a new generation of VMIDs being used
+ *
+ * The hardware supports only 256 values with the value zero reserved for the
+ * host, so we check if an assigned value belongs to a previous generation,
+ * which which requires us to assign a new value. If we're the first to use a
+ * VMID for the new generation, we must flush necessary caches and TLBs on all
+ * CPUs.
+ */
+static bool need_new_vmid_gen(struct kvm *kvm)
+{
+ return unlikely(kvm->arch.vmid_gen != atomic64_read(&kvm_vmid_gen));
+}
+
+/**
+ * update_vttbr - Update the VTTBR with a valid VMID before the guest runs
+ * @kvm The guest that we are about to run
+ *
+ * Called from kvm_arch_vcpu_ioctl_run before entering the guest to ensure the
+ * VM has a valid VMID, otherwise assigns a new one and flushes corresponding
+ * caches and TLBs.
+ */
+static void update_vttbr(struct kvm *kvm)
+{
+ phys_addr_t pgd_phys;
+ u64 vmid;
+
+ if (!need_new_vmid_gen(kvm))
+ return;
+
+ spin_lock(&kvm_vmid_lock);
+
+ /*
+ * We need to re-check the vmid_gen here to ensure that if another vcpu
+ * already allocated a valid vmid for this vm, then this vcpu should
+ * use the same vmid.
+ */
+ if (!need_new_vmid_gen(kvm)) {
+ spin_unlock(&kvm_vmid_lock);
+ return;
+ }
+
+ /* First user of a new VMID generation? */
+ if (unlikely(kvm_next_vmid == 0)) {
+ atomic64_inc(&kvm_vmid_gen);
+ kvm_next_vmid = 1;
+
+ /*
+ * On SMP we know no other CPUs can use this CPU's or each
+ * other's VMID after force_vm_exit returns since the
+ * kvm_vmid_lock blocks them from reentry to the guest.
+ */
+ force_vm_exit(cpu_all_mask);
+ /*
+ * Now broadcast TLB + ICACHE invalidation over the inner
+ * shareable domain to make sure all data structures are
+ * clean.
+ */
+ kvm_call_hyp(__kvm_flush_vm_context);
+ }
+
+ kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen);
+ kvm->arch.vmid = kvm_next_vmid;
+ kvm_next_vmid++;
+
+ /* update vttbr to be used with the new vmid */
+ pgd_phys = virt_to_phys(kvm->arch.pgd);
+ vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
+ kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK;
+ kvm->arch.vttbr |= vmid;
+
+ spin_unlock(&kvm_vmid_lock);
+}
+
+static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /* SVC called from Hyp mode should never get here */
+ kvm_debug("SVC called from Hyp mode shouldn't go here\n");
+ BUG();
+ return -EINVAL; /* Squash warning */
+}
+
+static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
+ vcpu->arch.hsr & HSR_HVC_IMM_MASK);
+
+ if (kvm_psci_call(vcpu))
+ return 1;
+
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ if (kvm_psci_call(vcpu))
+ return 1;
+
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /* The hypervisor should never cause aborts */
+ kvm_err("Prefetch Abort taken from Hyp mode at %#08x (HSR: %#08x)\n",
+ vcpu->arch.hxfar, vcpu->arch.hsr);
+ return -EFAULT;
+}
+
+static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /* This is either an error in the ws. code or an external abort */
+ kvm_err("Data Abort taken from Hyp mode at %#08x (HSR: %#08x)\n",
+ vcpu->arch.hxfar, vcpu->arch.hsr);
+ return -EFAULT;
+}
+
+typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *);
+static exit_handle_fn arm_exit_handlers[] = {
+ [HSR_EC_WFI] = kvm_handle_wfi,
+ [HSR_EC_CP15_32] = kvm_handle_cp15_32,
+ [HSR_EC_CP15_64] = kvm_handle_cp15_64,
+ [HSR_EC_CP14_MR] = kvm_handle_cp14_access,
+ [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store,
+ [HSR_EC_CP14_64] = kvm_handle_cp14_access,
+ [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access,
+ [HSR_EC_CP10_ID] = kvm_handle_cp10_id,
+ [HSR_EC_SVC_HYP] = handle_svc_hyp,
+ [HSR_EC_HVC] = handle_hvc,
+ [HSR_EC_SMC] = handle_smc,
+ [HSR_EC_IABT] = kvm_handle_guest_abort,
+ [HSR_EC_IABT_HYP] = handle_pabt_hyp,
+ [HSR_EC_DABT] = kvm_handle_guest_abort,
+ [HSR_EC_DABT_HYP] = handle_dabt_hyp,
+};
+
+/*
+ * A conditional instruction is allowed to trap, even though it
+ * wouldn't be executed. So let's re-implement the hardware, in
+ * software!
+ */
+static bool kvm_condition_valid(struct kvm_vcpu *vcpu)
+{
+ unsigned long cpsr, cond, insn;
+
+ /*
+ * Exception Code 0 can only happen if we set HCR.TGE to 1, to
+ * catch undefined instructions, and then we won't get past
+ * the arm_exit_handlers test anyway.
+ */
+ BUG_ON(((vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT) == 0);
+
+ /* Top two bits non-zero? Unconditional. */
+ if (vcpu->arch.hsr >> 30)
+ return true;
+
+ cpsr = *vcpu_cpsr(vcpu);
+
+ /* Is condition field valid? */
+ if ((vcpu->arch.hsr & HSR_CV) >> HSR_CV_SHIFT)
+ cond = (vcpu->arch.hsr & HSR_COND) >> HSR_COND_SHIFT;
+ else {
+ /* This can happen in Thumb mode: examine IT state. */
+ unsigned long it;
+
+ it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3);
+
+ /* it == 0 => unconditional. */
+ if (it == 0)
+ return true;
+
+ /* The cond for this insn works out as the top 4 bits. */
+ cond = (it >> 4);
+ }
+
+ /* Shift makes it look like an ARM-mode instruction */
+ insn = cond << 28;
+ return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL;
+}
+
+/*
+ * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on
+ * proper exit to QEMU.
+ */
+static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ int exception_index)
+{
+ unsigned long hsr_ec;
+
+ switch (exception_index) {
+ case ARM_EXCEPTION_IRQ:
+ return 1;
+ case ARM_EXCEPTION_UNDEFINED:
+ kvm_err("Undefined exception in Hyp mode at: %#08x\n",
+ vcpu->arch.hyp_pc);
+ BUG();
+ panic("KVM: Hypervisor undefined exception!\n");
+ case ARM_EXCEPTION_DATA_ABORT:
+ case ARM_EXCEPTION_PREF_ABORT:
+ case ARM_EXCEPTION_HVC:
+ hsr_ec = (vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT;
+
+ if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers)
+ || !arm_exit_handlers[hsr_ec]) {
+ kvm_err("Unkown exception class: %#08lx, "
+ "hsr: %#08x\n", hsr_ec,
+ (unsigned int)vcpu->arch.hsr);
+ BUG();
+ }
+
+ /*
+ * See ARM ARM B1.14.1: "Hyp traps on instructions
+ * that fail their condition code check"
+ */
+ if (!kvm_condition_valid(vcpu)) {
+ bool is_wide = vcpu->arch.hsr & HSR_IL;
+ kvm_skip_instr(vcpu, is_wide);
+ return 1;
+ }
+
+ return arm_exit_handlers[hsr_ec](vcpu, run);
+ default:
+ kvm_pr_unimpl("Unsupported exception type: %d",
+ exception_index);
+ run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ return 0;
+ }
+}
+
+static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
+{
+ if (likely(vcpu->arch.has_run_once))
+ return 0;
+
+ vcpu->arch.has_run_once = true;
+
+ /*
+ * Handle the "start in power-off" case by calling into the
+ * PSCI code.
+ */
+ if (test_and_clear_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features)) {
+ *vcpu_reg(vcpu, 0) = KVM_PSCI_FN_CPU_OFF;
+ kvm_psci_call(vcpu);
+ }
+
+ return 0;
+}
+
+static void vcpu_pause(struct kvm_vcpu *vcpu)
+{
+ wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+
+ wait_event_interruptible(*wq, !vcpu->arch.pause);
+}
+
+/**
+ * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run structure pointer used for userspace state exchange
+ *
+ * This function is called through the VCPU_RUN ioctl called from user space. It
+ * will execute VM code in a loop until the time slice for the process is used
+ * or some emulation is needed from user space in which case the function will
+ * return with return value 0 and with the kvm_run structure filled in with the
+ * required data for the requested emulation.
+ */
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ int ret;
+ sigset_t sigsaved;
+
+ /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
+ if (unlikely(vcpu->arch.target < 0))
+ return -ENOEXEC;
+
+ ret = kvm_vcpu_first_run_init(vcpu);
+ if (ret)
+ return ret;
+
+ if (run->exit_reason == KVM_EXIT_MMIO) {
+ ret = kvm_handle_mmio_return(vcpu, vcpu->run);
+ if (ret)
+ return ret;
+ }
+
+ if (vcpu->sigset_active)
+ sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
+
+ ret = 1;
+ run->exit_reason = KVM_EXIT_UNKNOWN;
+ while (ret > 0) {
+ /*
+ * Check conditions before entering the guest
+ */
+ cond_resched();
+
+ update_vttbr(vcpu->kvm);
+
+ if (vcpu->arch.pause)
+ vcpu_pause(vcpu);
+
+ local_irq_disable();
+
+ /*
+ * Re-check atomic conditions
+ */
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ run->exit_reason = KVM_EXIT_INTR;
+ }
+
+ if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) {
+ local_irq_enable();
+ continue;
+ }
+
+ /**************************************************************
+ * Enter the guest
+ */
+ trace_kvm_entry(*vcpu_pc(vcpu));
+ kvm_guest_enter();
+ vcpu->mode = IN_GUEST_MODE;
+
+ ret = kvm_call_hyp(__kvm_vcpu_run, vcpu);
+
+ vcpu->mode = OUTSIDE_GUEST_MODE;
+ vcpu->arch.last_pcpu = smp_processor_id();
+ kvm_guest_exit();
+ trace_kvm_exit(*vcpu_pc(vcpu));
+ /*
+ * We may have taken a host interrupt in HYP mode (ie
+ * while executing the guest). This interrupt is still
+ * pending, as we haven't serviced it yet!
+ *
+ * We're now back in SVC mode, with interrupts
+ * disabled. Enabling the interrupts now will have
+ * the effect of taking the interrupt again, in SVC
+ * mode this time.
+ */
+ local_irq_enable();
+
+ /*
+ * Back from guest
+ *************************************************************/
+
+ ret = handle_exit(vcpu, run, ret);
+ }
+
+ if (vcpu->sigset_active)
+ sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+ return ret;
+}
+
+static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level)
+{
+ int bit_index;
+ bool set;
+ unsigned long *ptr;
+
+ if (number == KVM_ARM_IRQ_CPU_IRQ)
+ bit_index = __ffs(HCR_VI);
+ else /* KVM_ARM_IRQ_CPU_FIQ */
+ bit_index = __ffs(HCR_VF);
+
+ ptr = (unsigned long *)&vcpu->arch.irq_lines;
+ if (level)
+ set = test_and_set_bit(bit_index, ptr);
+ else
+ set = test_and_clear_bit(bit_index, ptr);
+
+ /*
+ * If we didn't change anything, no need to wake up or kick other CPUs
+ */
+ if (set == level)
+ return 0;
+
+ /*
+ * The vcpu irq_lines field was updated, wake up sleeping VCPUs and
+ * trigger a world-switch round on the running physical CPU to set the
+ * virtual IRQ/FIQ fields in the HCR appropriately.
+ */
+ kvm_vcpu_kick(vcpu);
+
+ return 0;
+}
+
+int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level)
+{
+ u32 irq = irq_level->irq;
+ unsigned int irq_type, vcpu_idx, irq_num;
+ int nrcpus = atomic_read(&kvm->online_vcpus);
+ struct kvm_vcpu *vcpu = NULL;
+ bool level = irq_level->level;
+
+ irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
+ vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
+ irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
+
+ trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
+
+ if (irq_type != KVM_ARM_IRQ_TYPE_CPU)
+ return -EINVAL;
+
+ if (vcpu_idx >= nrcpus)
+ return -EINVAL;
+
+ vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+ if (!vcpu)
+ return -EINVAL;
+
+ if (irq_num > KVM_ARM_IRQ_CPU_FIQ)
+ return -EINVAL;
+
+ return vcpu_interrupt_line(vcpu, irq_num, level);
+}
+
+long kvm_arch_vcpu_ioctl(struct file *filp,
+ unsigned int ioctl, unsigned long arg)
+{
+ struct kvm_vcpu *vcpu = filp->private_data;
+ void __user *argp = (void __user *)arg;
+
+ switch (ioctl) {
+ case KVM_ARM_VCPU_INIT: {
+ struct kvm_vcpu_init init;
+
+ if (copy_from_user(&init, argp, sizeof(init)))
+ return -EFAULT;
+
+ return kvm_vcpu_set_target(vcpu, &init);
+
+ }
+ case KVM_SET_ONE_REG:
+ case KVM_GET_ONE_REG: {
+ struct kvm_one_reg reg;
+ if (copy_from_user(®, argp, sizeof(reg)))
+ return -EFAULT;
+ if (ioctl == KVM_SET_ONE_REG)
+ return kvm_arm_set_reg(vcpu, ®);
+ else
+ return kvm_arm_get_reg(vcpu, ®);
+ }
+ case KVM_GET_REG_LIST: {
+ struct kvm_reg_list __user *user_list = argp;
+ struct kvm_reg_list reg_list;
+ unsigned n;
+
+ if (copy_from_user(®_list, user_list, sizeof(reg_list)))
+ return -EFAULT;
+ n = reg_list.n;
+ reg_list.n = kvm_arm_num_regs(vcpu);
+ if (copy_to_user(user_list, ®_list, sizeof(reg_list)))
+ return -EFAULT;
+ if (n < reg_list.n)
+ return -E2BIG;
+ return kvm_arm_copy_reg_indices(vcpu, user_list->reg);
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
+{
+ return -EINVAL;
+}
+
+long kvm_arch_vm_ioctl(struct file *filp,
+ unsigned int ioctl, unsigned long arg)
+{
+ return -EINVAL;
+}
+
+static void cpu_init_hyp_mode(void *vector)
+{
+ unsigned long long pgd_ptr;
+ unsigned long pgd_low, pgd_high;
+ unsigned long hyp_stack_ptr;
+ unsigned long stack_page;
+ unsigned long vector_ptr;
+
+ /* Switch from the HYP stub to our own HYP init vector */
+ __hyp_set_vectors((unsigned long)vector);
+
+ pgd_ptr = (unsigned long long)kvm_mmu_get_httbr();
+ pgd_low = (pgd_ptr & ((1ULL << 32) - 1));
+ pgd_high = (pgd_ptr >> 32ULL);
+ stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
+ hyp_stack_ptr = stack_page + PAGE_SIZE;
+ vector_ptr = (unsigned long)__kvm_hyp_vector;
+
+ /*
+ * Call initialization code, and switch to the full blown
+ * HYP code. The init code doesn't need to preserve these registers as
+ * r1-r3 and r12 are already callee save according to the AAPCS.
+ * Note that we slightly misuse the prototype by casing the pgd_low to
+ * a void *.
+ */
+ kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr);
+}
+
+/**
+ * Inits Hyp-mode on all online CPUs
+ */
+static int init_hyp_mode(void)
+{
+ phys_addr_t init_phys_addr;
+ int cpu;
+ int err = 0;
+
+ /*
+ * Allocate Hyp PGD and setup Hyp identity mapping
+ */
+ err = kvm_mmu_init();
+ if (err)
+ goto out_err;
+
+ /*
+ * It is probably enough to obtain the default on one
+ * CPU. It's unlikely to be different on the others.
+ */
+ hyp_default_vectors = __hyp_get_vectors();
+
+ /*
+ * Allocate stack pages for Hypervisor-mode
+ */
+ for_each_possible_cpu(cpu) {
+ unsigned long stack_page;
+
+ stack_page = __get_free_page(GFP_KERNEL);
+ if (!stack_page) {
+ err = -ENOMEM;
+ goto out_free_stack_pages;
+ }
+
+ per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
+ }
+
+ /*
+ * Execute the init code on each CPU.
+ *
+ * Note: The stack is not mapped yet, so don't do anything else than
+ * initializing the hypervisor mode on each CPU using a local stack
+ * space for temporary storage.
+ */
+ init_phys_addr = virt_to_phys(__kvm_hyp_init);
+ for_each_online_cpu(cpu) {
+ smp_call_function_single(cpu, cpu_init_hyp_mode,
+ (void *)(long)init_phys_addr, 1);
+ }
+
+ /*
+ * Unmap the identity mapping
+ */
+ kvm_clear_hyp_idmap();
+
+ /*
+ * Map the Hyp-code called directly from the host
+ */
+ err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
+ if (err) {
+ kvm_err("Cannot map world-switch code\n");
+ goto out_free_mappings;
+ }
+
+ /*
+ * Map the Hyp stack pages
+ */
+ for_each_possible_cpu(cpu) {
+ char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
+ err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE);
+
+ if (err) {
+ kvm_err("Cannot map hyp stack\n");
+ goto out_free_mappings;
+ }
+ }
+
+ /*
+ * Map the host VFP structures
+ */
+ kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct);
+ if (!kvm_host_vfp_state) {
+ err = -ENOMEM;
+ kvm_err("Cannot allocate host VFP state\n");
+ goto out_free_mappings;
+ }
+
+ for_each_possible_cpu(cpu) {
+ struct vfp_hard_struct *vfp;
+
+ vfp = per_cpu_ptr(kvm_host_vfp_state, cpu);
+ err = create_hyp_mappings(vfp, vfp + 1);
+
+ if (err) {
+ kvm_err("Cannot map host VFP state: %d\n", err);
+ goto out_free_vfp;
+ }
+ }
+
+ kvm_info("Hyp mode initialized successfully\n");
+ return 0;
+out_free_vfp:
+ free_percpu(kvm_host_vfp_state);
+out_free_mappings:
+ free_hyp_pmds();
+out_free_stack_pages:
+ for_each_possible_cpu(cpu)
+ free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+out_err:
+ kvm_err("error initializing Hyp mode: %d\n", err);
+ return err;
+}
+
+/**
+ * Initialize Hyp-mode and memory mappings on all CPUs.
+ */
+int kvm_arch_init(void *opaque)
+{
+ int err;
+
+ if (!is_hyp_mode_available()) {
+ kvm_err("HYP mode not available\n");
+ return -ENODEV;
+ }
+
+ if (kvm_target_cpu() < 0) {
+ kvm_err("Target CPU not supported!\n");
+ return -ENODEV;
+ }
+
+ err = init_hyp_mode();
+ if (err)
+ goto out_err;
+
+ kvm_coproc_table_init();
+ return 0;
+out_err:
+ return err;
+}
+
+/* NOP: Compiling as a module not supported */
+void kvm_arch_exit(void)
+{
+}
+
+static int arm_init(void)
+{
+ int rc = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
+ return rc;
+}
+
+module_init(arm_init);
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
new file mode 100644
index 0000000..d782638
--- /dev/null
+++ b/arch/arm/kvm/coproc.c
@@ -0,0 +1,1046 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Authors: Rusty Russell <rusty@rustcorp.com.au>
+ * Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <linux/mm.h>
+#include <linux/kvm_host.h>
+#include <linux/uaccess.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_coproc.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <trace/events/kvm.h>
+#include <asm/vfp.h>
+#include "../vfp/vfpinstr.h"
+
+#include "trace.h"
+#include "coproc.h"
+
+
+/******************************************************************************
+ * Co-processor emulation
+ *****************************************************************************/
+
+/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */
+static u32 cache_levels;
+
+/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
+#define CSSELR_MAX 12
+
+int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /*
+ * We can get here, if the host has been built without VFPv3 support,
+ * but the guest attempted a floating point operation.
+ */
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+/* See note at ARM ARM B1.14.4 */
+static bool access_dcsw(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ u32 val;
+ int cpu;
+
+ cpu = get_cpu();
+
+ if (!p->is_write)
+ return read_from_write_only(vcpu, p);
+
+ cpumask_setall(&vcpu->arch.require_dcache_flush);
+ cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush);
+
+ /* If we were already preempted, take the long way around */
+ if (cpu != vcpu->arch.last_pcpu) {
+ flush_cache_all();
+ goto done;
+ }
+
+ val = *vcpu_reg(vcpu, p->Rt1);
+
+ switch (p->CRm) {
+ case 6: /* Upgrade DCISW to DCCISW, as per HCR.SWIO */
+ case 14: /* DCCISW */
+ asm volatile("mcr p15, 0, %0, c7, c14, 2" : : "r" (val));
+ break;
+
+ case 10: /* DCCSW */
+ asm volatile("mcr p15, 0, %0, c7, c10, 2" : : "r" (val));
+ break;
+ }
+
+done:
+ put_cpu();
+
+ return true;
+}
+
+/*
+ * We could trap ID_DFR0 and tell the guest we don't support performance
+ * monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was
+ * NAKed, so it will read the PMCR anyway.
+ *
+ * Therefore we tell the guest we have 0 counters. Unfortunately, we
+ * must always support PMCCNTR (the cycle counter): we just RAZ/WI for
+ * all PM registers, which doesn't crash the guest kernel at least.
+ */
+static bool pm_fake(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+ else
+ return read_zero(vcpu, p);
+}
+
+#define access_pmcr pm_fake
+#define access_pmcntenset pm_fake
+#define access_pmcntenclr pm_fake
+#define access_pmovsr pm_fake
+#define access_pmselr pm_fake
+#define access_pmceid0 pm_fake
+#define access_pmceid1 pm_fake
+#define access_pmccntr pm_fake
+#define access_pmxevtyper pm_fake
+#define access_pmxevcntr pm_fake
+#define access_pmuserenr pm_fake
+#define access_pmintenset pm_fake
+#define access_pmintenclr pm_fake
+
+/* Architected CP15 registers.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2
+ */
+static const struct coproc_reg cp15_regs[] = {
+ /* CSSELR: swapped by interrupt.S. */
+ { CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
+ NULL, reset_unknown, c0_CSSELR },
+
+ /* TTBR0/TTBR1: swapped by interrupt.S. */
+ { CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
+ { CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
+
+ /* TTBCR: swapped by interrupt.S. */
+ { CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32,
+ NULL, reset_val, c2_TTBCR, 0x00000000 },
+
+ /* DACR: swapped by interrupt.S. */
+ { CRn( 3), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_unknown, c3_DACR },
+
+ /* DFSR/IFSR/ADFSR/AIFSR: swapped by interrupt.S. */
+ { CRn( 5), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_unknown, c5_DFSR },
+ { CRn( 5), CRm( 0), Op1( 0), Op2( 1), is32,
+ NULL, reset_unknown, c5_IFSR },
+ { CRn( 5), CRm( 1), Op1( 0), Op2( 0), is32,
+ NULL, reset_unknown, c5_ADFSR },
+ { CRn( 5), CRm( 1), Op1( 0), Op2( 1), is32,
+ NULL, reset_unknown, c5_AIFSR },
+
+ /* DFAR/IFAR: swapped by interrupt.S. */
+ { CRn( 6), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_unknown, c6_DFAR },
+ { CRn( 6), CRm( 0), Op1( 0), Op2( 2), is32,
+ NULL, reset_unknown, c6_IFAR },
+ /*
+ * DC{C,I,CI}SW operations:
+ */
+ { CRn( 7), CRm( 6), Op1( 0), Op2( 2), is32, access_dcsw},
+ { CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw},
+ { CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw},
+ /*
+ * Dummy performance monitor implementation.
+ */
+ { CRn( 9), CRm(12), Op1( 0), Op2( 0), is32, access_pmcr},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 1), is32, access_pmcntenset},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 2), is32, access_pmcntenclr},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 3), is32, access_pmovsr},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 5), is32, access_pmselr},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 6), is32, access_pmceid0},
+ { CRn( 9), CRm(12), Op1( 0), Op2( 7), is32, access_pmceid1},
+ { CRn( 9), CRm(13), Op1( 0), Op2( 0), is32, access_pmccntr},
+ { CRn( 9), CRm(13), Op1( 0), Op2( 1), is32, access_pmxevtyper},
+ { CRn( 9), CRm(13), Op1( 0), Op2( 2), is32, access_pmxevcntr},
+ { CRn( 9), CRm(14), Op1( 0), Op2( 0), is32, access_pmuserenr},
+ { CRn( 9), CRm(14), Op1( 0), Op2( 1), is32, access_pmintenset},
+ { CRn( 9), CRm(14), Op1( 0), Op2( 2), is32, access_pmintenclr},
+
+ /* PRRR/NMRR (aka MAIR0/MAIR1): swapped by interrupt.S. */
+ { CRn(10), CRm( 2), Op1( 0), Op2( 0), is32,
+ NULL, reset_unknown, c10_PRRR},
+ { CRn(10), CRm( 2), Op1( 0), Op2( 1), is32,
+ NULL, reset_unknown, c10_NMRR},
+
+ /* VBAR: swapped by interrupt.S. */
+ { CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_val, c12_VBAR, 0x00000000 },
+
+ /* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */
+ { CRn(13), CRm( 0), Op1( 0), Op2( 1), is32,
+ NULL, reset_val, c13_CID, 0x00000000 },
+ { CRn(13), CRm( 0), Op1( 0), Op2( 2), is32,
+ NULL, reset_unknown, c13_TID_URW },
+ { CRn(13), CRm( 0), Op1( 0), Op2( 3), is32,
+ NULL, reset_unknown, c13_TID_URO },
+ { CRn(13), CRm( 0), Op1( 0), Op2( 4), is32,
+ NULL, reset_unknown, c13_TID_PRIV },
+};
+
+/* Target specific emulation tables */
+static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
+
+void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
+{
+ target_tables[table->target] = table;
+}
+
+/* Get specific register table for this target. */
+static const struct coproc_reg *get_target_table(unsigned target, size_t *num)
+{
+ struct kvm_coproc_target_table *table;
+
+ table = target_tables[target];
+ *num = table->num;
+ return table->table;
+}
+
+static const struct coproc_reg *find_reg(const struct coproc_params *params,
+ const struct coproc_reg table[],
+ unsigned int num)
+{
+ unsigned int i;
+
+ for (i = 0; i < num; i++) {
+ const struct coproc_reg *r = &table[i];
+
+ if (params->is_64bit != r->is_64)
+ continue;
+ if (params->CRn != r->CRn)
+ continue;
+ if (params->CRm != r->CRm)
+ continue;
+ if (params->Op1 != r->Op1)
+ continue;
+ if (params->Op2 != r->Op2)
+ continue;
+
+ return r;
+ }
+ return NULL;
+}
+
+static int emulate_cp15(struct kvm_vcpu *vcpu,
+ const struct coproc_params *params)
+{
+ size_t num;
+ const struct coproc_reg *table, *r;
+
+ trace_kvm_emulate_cp15_imp(params->Op1, params->Rt1, params->CRn,
+ params->CRm, params->Op2, params->is_write);
+
+ table = get_target_table(vcpu->arch.target, &num);
+
+ /* Search target-specific then generic table. */
+ r = find_reg(params, table, num);
+ if (!r)
+ r = find_reg(params, cp15_regs, ARRAY_SIZE(cp15_regs));
+
+ if (likely(r)) {
+ /* If we don't have an accessor, we should never get here! */
+ BUG_ON(!r->access);
+
+ if (likely(r->access(vcpu, params, r))) {
+ /* Skip instruction, since it was emulated */
+ kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1);
+ return 1;
+ }
+ /* If access function fails, it should complain. */
+ } else {
+ kvm_err("Unsupported guest CP15 access at: %08x\n",
+ *vcpu_pc(vcpu));
+ print_cp_instr(params);
+ }
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
+/**
+ * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params;
+
+ params.CRm = (vcpu->arch.hsr >> 1) & 0xf;
+ params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf;
+ params.is_write = ((vcpu->arch.hsr & 1) == 0);
+ params.is_64bit = true;
+
+ params.Op1 = (vcpu->arch.hsr >> 16) & 0xf;
+ params.Op2 = 0;
+ params.Rt2 = (vcpu->arch.hsr >> 10) & 0xf;
+ params.CRn = 0;
+
+ return emulate_cp15(vcpu, ¶ms);
+}
+
+static void reset_coproc_regs(struct kvm_vcpu *vcpu,
+ const struct coproc_reg *table, size_t num)
+{
+ unsigned long i;
+
+ for (i = 0; i < num; i++)
+ if (table[i].reset)
+ table[i].reset(vcpu, &table[i]);
+}
+
+/**
+ * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params;
+
+ params.CRm = (vcpu->arch.hsr >> 1) & 0xf;
+ params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf;
+ params.is_write = ((vcpu->arch.hsr & 1) == 0);
+ params.is_64bit = false;
+
+ params.CRn = (vcpu->arch.hsr >> 10) & 0xf;
+ params.Op1 = (vcpu->arch.hsr >> 14) & 0x7;
+ params.Op2 = (vcpu->arch.hsr >> 17) & 0x7;
+ params.Rt2 = 0;
+
+ return emulate_cp15(vcpu, ¶ms);
+}
+
+/******************************************************************************
+ * Userspace API
+ *****************************************************************************/
+
+static bool index_to_params(u64 id, struct coproc_params *params)
+{
+ switch (id & KVM_REG_SIZE_MASK) {
+ case KVM_REG_SIZE_U32:
+ /* Any unused index bits means it's not valid. */
+ if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK
+ | KVM_REG_ARM_COPROC_MASK
+ | KVM_REG_ARM_32_CRN_MASK
+ | KVM_REG_ARM_CRM_MASK
+ | KVM_REG_ARM_OPC1_MASK
+ | KVM_REG_ARM_32_OPC2_MASK))
+ return false;
+
+ params->is_64bit = false;
+ params->CRn = ((id & KVM_REG_ARM_32_CRN_MASK)
+ >> KVM_REG_ARM_32_CRN_SHIFT);
+ params->CRm = ((id & KVM_REG_ARM_CRM_MASK)
+ >> KVM_REG_ARM_CRM_SHIFT);
+ params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK)
+ >> KVM_REG_ARM_OPC1_SHIFT);
+ params->Op2 = ((id & KVM_REG_ARM_32_OPC2_MASK)
+ >> KVM_REG_ARM_32_OPC2_SHIFT);
+ return true;
+ case KVM_REG_SIZE_U64:
+ /* Any unused index bits means it's not valid. */
+ if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK
+ | KVM_REG_ARM_COPROC_MASK
+ | KVM_REG_ARM_CRM_MASK
+ | KVM_REG_ARM_OPC1_MASK))
+ return false;
+ params->is_64bit = true;
+ params->CRm = ((id & KVM_REG_ARM_CRM_MASK)
+ >> KVM_REG_ARM_CRM_SHIFT);
+ params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK)
+ >> KVM_REG_ARM_OPC1_SHIFT);
+ params->Op2 = 0;
+ params->CRn = 0;
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* Decode an index value, and find the cp15 coproc_reg entry. */
+static const struct coproc_reg *index_to_coproc_reg(struct kvm_vcpu *vcpu,
+ u64 id)
+{
+ size_t num;
+ const struct coproc_reg *table, *r;
+ struct coproc_params params;
+
+ /* We only do cp15 for now. */
+ if ((id & KVM_REG_ARM_COPROC_MASK) >> KVM_REG_ARM_COPROC_SHIFT != 15)
+ return NULL;
+
+ if (!index_to_params(id, ¶ms))
+ return NULL;
+
+ table = get_target_table(vcpu->arch.target, &num);
+ r = find_reg(¶ms, table, num);
+ if (!r)
+ r = find_reg(¶ms, cp15_regs, ARRAY_SIZE(cp15_regs));
+
+ /* Not saved in the cp15 array? */
+ if (r && !r->reg)
+ r = NULL;
+
+ return r;
+}
+
+/*
+ * These are the invariant cp15 registers: we let the guest see the host
+ * versions of these, so they're part of the guest state.
+ *
+ * A future CPU may provide a mechanism to present different values to
+ * the guest, or a future kvm may trap them.
+ */
+/* Unfortunately, there's no register-argument for mrc, so generate. */
+#define FUNCTION_FOR32(crn, crm, op1, op2, name) \
+ static void get_##name(struct kvm_vcpu *v, \
+ const struct coproc_reg *r) \
+ { \
+ u32 val; \
+ \
+ asm volatile("mrc p15, " __stringify(op1) \
+ ", %0, c" __stringify(crn) \
+ ", c" __stringify(crm) \
+ ", " __stringify(op2) "\n" : "=r" (val)); \
+ ((struct coproc_reg *)r)->val = val; \
+ }
+
+FUNCTION_FOR32(0, 0, 0, 0, MIDR)
+FUNCTION_FOR32(0, 0, 0, 1, CTR)
+FUNCTION_FOR32(0, 0, 0, 2, TCMTR)
+FUNCTION_FOR32(0, 0, 0, 3, TLBTR)
+FUNCTION_FOR32(0, 0, 0, 6, REVIDR)
+FUNCTION_FOR32(0, 1, 0, 0, ID_PFR0)
+FUNCTION_FOR32(0, 1, 0, 1, ID_PFR1)
+FUNCTION_FOR32(0, 1, 0, 2, ID_DFR0)
+FUNCTION_FOR32(0, 1, 0, 3, ID_AFR0)
+FUNCTION_FOR32(0, 1, 0, 4, ID_MMFR0)
+FUNCTION_FOR32(0, 1, 0, 5, ID_MMFR1)
+FUNCTION_FOR32(0, 1, 0, 6, ID_MMFR2)
+FUNCTION_FOR32(0, 1, 0, 7, ID_MMFR3)
+FUNCTION_FOR32(0, 2, 0, 0, ID_ISAR0)
+FUNCTION_FOR32(0, 2, 0, 1, ID_ISAR1)
+FUNCTION_FOR32(0, 2, 0, 2, ID_ISAR2)
+FUNCTION_FOR32(0, 2, 0, 3, ID_ISAR3)
+FUNCTION_FOR32(0, 2, 0, 4, ID_ISAR4)
+FUNCTION_FOR32(0, 2, 0, 5, ID_ISAR5)
+FUNCTION_FOR32(0, 0, 1, 1, CLIDR)
+FUNCTION_FOR32(0, 0, 1, 7, AIDR)
+
+/* ->val is filled in by kvm_invariant_coproc_table_init() */
+static struct coproc_reg invariant_cp15[] = {
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 0), is32, NULL, get_MIDR },
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 1), is32, NULL, get_CTR },
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 2), is32, NULL, get_TCMTR },
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR },
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR },
+
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 3), is32, NULL, get_ID_AFR0 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 4), is32, NULL, get_ID_MMFR0 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 5), is32, NULL, get_ID_MMFR1 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 6), is32, NULL, get_ID_MMFR2 },
+ { CRn( 0), CRm( 1), Op1( 0), Op2( 7), is32, NULL, get_ID_MMFR3 },
+
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 0), is32, NULL, get_ID_ISAR0 },
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 1), is32, NULL, get_ID_ISAR1 },
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 2), is32, NULL, get_ID_ISAR2 },
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 },
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 },
+ { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 },
+
+ { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR },
+ { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
+};
+
+static int reg_from_user(void *val, const void __user *uaddr, u64 id)
+{
+ /* This Just Works because we are little endian. */
+ if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0)
+ return -EFAULT;
+ return 0;
+}
+
+static int reg_to_user(void __user *uaddr, const void *val, u64 id)
+{
+ /* This Just Works because we are little endian. */
+ if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0)
+ return -EFAULT;
+ return 0;
+}
+
+static int get_invariant_cp15(u64 id, void __user *uaddr)
+{
+ struct coproc_params params;
+ const struct coproc_reg *r;
+
+ if (!index_to_params(id, ¶ms))
+ return -ENOENT;
+
+ r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15));
+ if (!r)
+ return -ENOENT;
+
+ return reg_to_user(uaddr, &r->val, id);
+}
+
+static int set_invariant_cp15(u64 id, void __user *uaddr)
+{
+ struct coproc_params params;
+ const struct coproc_reg *r;
+ int err;
+ u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */
+
+ if (!index_to_params(id, ¶ms))
+ return -ENOENT;
+ r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15));
+ if (!r)
+ return -ENOENT;
+
+ err = reg_from_user(&val, uaddr, id);
+ if (err)
+ return err;
+
+ /* This is what we mean by invariant: you can't change it. */
+ if (r->val != val)
+ return -EINVAL;
+
+ return 0;
+}
+
+static bool is_valid_cache(u32 val)
+{
+ u32 level, ctype;
+
+ if (val >= CSSELR_MAX)
+ return -ENOENT;
+
+ /* Bottom bit is Instruction or Data bit. Next 3 bits are level. */
+ level = (val >> 1);
+ ctype = (cache_levels >> (level * 3)) & 7;
+
+ switch (ctype) {
+ case 0: /* No cache */
+ return false;
+ case 1: /* Instruction cache only */
+ return (val & 1);
+ case 2: /* Data cache only */
+ case 4: /* Unified cache */
+ return !(val & 1);
+ case 3: /* Separate instruction and data caches */
+ return true;
+ default: /* Reserved: we can't know instruction or data. */
+ return false;
+ }
+}
+
+/* Which cache CCSIDR represents depends on CSSELR value. */
+static u32 get_ccsidr(u32 csselr)
+{
+ u32 ccsidr;
+
+ /* Make sure noone else changes CSSELR during this! */
+ local_irq_disable();
+ /* Put value into CSSELR */
+ asm volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr));
+ isb();
+ /* Read result out of CCSIDR */
+ asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr));
+ local_irq_enable();
+
+ return ccsidr;
+}
+
+static int demux_c15_get(u64 id, void __user *uaddr)
+{
+ u32 val;
+ u32 __user *uval = uaddr;
+
+ /* Fail if we have unknown bits set. */
+ if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+ | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+ return -ENOENT;
+
+ switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
+ case KVM_REG_ARM_DEMUX_ID_CCSIDR:
+ if (KVM_REG_SIZE(id) != 4)
+ return -ENOENT;
+ val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
+ >> KVM_REG_ARM_DEMUX_VAL_SHIFT;
+ if (!is_valid_cache(val))
+ return -ENOENT;
+
+ return put_user(get_ccsidr(val), uval);
+ default:
+ return -ENOENT;
+ }
+}
+
+static int demux_c15_set(u64 id, void __user *uaddr)
+{
+ u32 val, newval;
+ u32 __user *uval = uaddr;
+
+ /* Fail if we have unknown bits set. */
+ if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+ | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+ return -ENOENT;
+
+ switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
+ case KVM_REG_ARM_DEMUX_ID_CCSIDR:
+ if (KVM_REG_SIZE(id) != 4)
+ return -ENOENT;
+ val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
+ >> KVM_REG_ARM_DEMUX_VAL_SHIFT;
+ if (!is_valid_cache(val))
+ return -ENOENT;
+
+ if (get_user(newval, uval))
+ return -EFAULT;
+
+ /* This is also invariant: you can't change it. */
+ if (newval != get_ccsidr(val))
+ return -EINVAL;
+ return 0;
+ default:
+ return -ENOENT;
+ }
+}
+
+#ifdef CONFIG_VFPv3
+static const int vfp_sysregs[] = { KVM_REG_ARM_VFP_FPEXC,
+ KVM_REG_ARM_VFP_FPSCR,
+ KVM_REG_ARM_VFP_FPINST,
+ KVM_REG_ARM_VFP_FPINST2,
+ KVM_REG_ARM_VFP_MVFR0,
+ KVM_REG_ARM_VFP_MVFR1,
+ KVM_REG_ARM_VFP_FPSID };
+
+static unsigned int num_fp_regs(void)
+{
+ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK) >> MVFR0_A_SIMD_BIT) == 2)
+ return 32;
+ else
+ return 16;
+}
+
+static unsigned int num_vfp_regs(void)
+{
+ /* Normal FP regs + control regs. */
+ return num_fp_regs() + ARRAY_SIZE(vfp_sysregs);
+}
+
+static int copy_vfp_regids(u64 __user *uindices)
+{
+ unsigned int i;
+ const u64 u32reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP;
+ const u64 u64reg = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
+
+ for (i = 0; i < num_fp_regs(); i++) {
+ if (put_user((u64reg | KVM_REG_ARM_VFP_BASE_REG) + i,
+ uindices))
+ return -EFAULT;
+ uindices++;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(vfp_sysregs); i++) {
+ if (put_user(u32reg | vfp_sysregs[i], uindices))
+ return -EFAULT;
+ uindices++;
+ }
+
+ return num_vfp_regs();
+}
+
+static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
+{
+ u32 vfpid = (id & KVM_REG_ARM_VFP_MASK);
+ u32 val;
+
+ /* Fail if we have unknown bits set. */
+ if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+ | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+ return -ENOENT;
+
+ if (vfpid < num_fp_regs()) {
+ if (KVM_REG_SIZE(id) != 8)
+ return -ENOENT;
+ return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid],
+ id);
+ }
+
+ /* FP control registers are all 32 bit. */
+ if (KVM_REG_SIZE(id) != 4)
+ return -ENOENT;
+
+ switch (vfpid) {
+ case KVM_REG_ARM_VFP_FPEXC:
+ return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id);
+ case KVM_REG_ARM_VFP_FPSCR:
+ return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id);
+ case KVM_REG_ARM_VFP_FPINST:
+ return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id);
+ case KVM_REG_ARM_VFP_FPINST2:
+ return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id);
+ case KVM_REG_ARM_VFP_MVFR0:
+ val = fmrx(MVFR0);
+ return reg_to_user(uaddr, &val, id);
+ case KVM_REG_ARM_VFP_MVFR1:
+ val = fmrx(MVFR1);
+ return reg_to_user(uaddr, &val, id);
+ case KVM_REG_ARM_VFP_FPSID:
+ val = fmrx(FPSID);
+ return reg_to_user(uaddr, &val, id);
+ default:
+ return -ENOENT;
+ }
+}
+
+static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
+{
+ u32 vfpid = (id & KVM_REG_ARM_VFP_MASK);
+ u32 val;
+
+ /* Fail if we have unknown bits set. */
+ if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+ | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+ return -ENOENT;
+
+ if (vfpid < num_fp_regs()) {
+ if (KVM_REG_SIZE(id) != 8)
+ return -ENOENT;
+ return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid],
+ uaddr, id);
+ }
+
+ /* FP control registers are all 32 bit. */
+ if (KVM_REG_SIZE(id) != 4)
+ return -ENOENT;
+
+ switch (vfpid) {
+ case KVM_REG_ARM_VFP_FPEXC:
+ return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id);
+ case KVM_REG_ARM_VFP_FPSCR:
+ return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id);
+ case KVM_REG_ARM_VFP_FPINST:
+ return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id);
+ case KVM_REG_ARM_VFP_FPINST2:
+ return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id);
+ /* These are invariant. */
+ case KVM_REG_ARM_VFP_MVFR0:
+ if (reg_from_user(&val, uaddr, id))
+ return -EFAULT;
+ if (val != fmrx(MVFR0))
+ return -EINVAL;
+ return 0;
+ case KVM_REG_ARM_VFP_MVFR1:
+ if (reg_from_user(&val, uaddr, id))
+ return -EFAULT;
+ if (val != fmrx(MVFR1))
+ return -EINVAL;
+ return 0;
+ case KVM_REG_ARM_VFP_FPSID:
+ if (reg_from_user(&val, uaddr, id))
+ return -EFAULT;
+ if (val != fmrx(FPSID))
+ return -EINVAL;
+ return 0;
+ default:
+ return -ENOENT;
+ }
+}
+#else /* !CONFIG_VFPv3 */
+static unsigned int num_vfp_regs(void)
+{
+ return 0;
+}
+
+static int copy_vfp_regids(u64 __user *uindices)
+{
+ return 0;
+}
+
+static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
+{
+ return -ENOENT;
+}
+
+static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
+{
+ return -ENOENT;
+}
+#endif /* !CONFIG_VFPv3 */
+
+int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ const struct coproc_reg *r;
+ void __user *uaddr = (void __user *)(long)reg->addr;
+
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
+ return demux_c15_get(reg->id, uaddr);
+
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP)
+ return vfp_get_reg(vcpu, reg->id, uaddr);
+
+ r = index_to_coproc_reg(vcpu, reg->id);
+ if (!r)
+ return get_invariant_cp15(reg->id, uaddr);
+
+ /* Note: copies two regs if size is 64 bit. */
+ return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id);
+}
+
+int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ const struct coproc_reg *r;
+ void __user *uaddr = (void __user *)(long)reg->addr;
+
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
+ return demux_c15_set(reg->id, uaddr);
+
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP)
+ return vfp_set_reg(vcpu, reg->id, uaddr);
+
+ r = index_to_coproc_reg(vcpu, reg->id);
+ if (!r)
+ return set_invariant_cp15(reg->id, uaddr);
+
+ /* Note: copies two regs if size is 64 bit */
+ return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id);
+}
+
+static unsigned int num_demux_regs(void)
+{
+ unsigned int i, count = 0;
+
+ for (i = 0; i < CSSELR_MAX; i++)
+ if (is_valid_cache(i))
+ count++;
+
+ return count;
+}
+
+static int write_demux_regids(u64 __user *uindices)
+{
+ u64 val = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX;
+ unsigned int i;
+
+ val |= KVM_REG_ARM_DEMUX_ID_CCSIDR;
+ for (i = 0; i < CSSELR_MAX; i++) {
+ if (!is_valid_cache(i))
+ continue;
+ if (put_user(val | i, uindices))
+ return -EFAULT;
+ uindices++;
+ }
+ return 0;
+}
+
+static u64 cp15_to_index(const struct coproc_reg *reg)
+{
+ u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT);
+ if (reg->is_64) {
+ val |= KVM_REG_SIZE_U64;
+ val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
+ val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT);
+ } else {
+ val |= KVM_REG_SIZE_U32;
+ val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
+ val |= (reg->Op2 << KVM_REG_ARM_32_OPC2_SHIFT);
+ val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT);
+ val |= (reg->CRn << KVM_REG_ARM_32_CRN_SHIFT);
+ }
+ return val;
+}
+
+static bool copy_reg_to_user(const struct coproc_reg *reg, u64 __user **uind)
+{
+ if (!*uind)
+ return true;
+
+ if (put_user(cp15_to_index(reg), *uind))
+ return false;
+
+ (*uind)++;
+ return true;
+}
+
+/* Assumed ordered tables, see kvm_coproc_table_init. */
+static int walk_cp15(struct kvm_vcpu *vcpu, u64 __user *uind)
+{
+ const struct coproc_reg *i1, *i2, *end1, *end2;
+ unsigned int total = 0;
+ size_t num;
+
+ /* We check for duplicates here, to allow arch-specific overrides. */
+ i1 = get_target_table(vcpu->arch.target, &num);
+ end1 = i1 + num;
+ i2 = cp15_regs;
+ end2 = cp15_regs + ARRAY_SIZE(cp15_regs);
+
+ BUG_ON(i1 == end1 || i2 == end2);
+
+ /* Walk carefully, as both tables may refer to the same register. */
+ while (i1 || i2) {
+ int cmp = cmp_reg(i1, i2);
+ /* target-specific overrides generic entry. */
+ if (cmp <= 0) {
+ /* Ignore registers we trap but don't save. */
+ if (i1->reg) {
+ if (!copy_reg_to_user(i1, &uind))
+ return -EFAULT;
+ total++;
+ }
+ } else {
+ /* Ignore registers we trap but don't save. */
+ if (i2->reg) {
+ if (!copy_reg_to_user(i2, &uind))
+ return -EFAULT;
+ total++;
+ }
+ }
+
+ if (cmp <= 0 && ++i1 == end1)
+ i1 = NULL;
+ if (cmp >= 0 && ++i2 == end2)
+ i2 = NULL;
+ }
+ return total;
+}
+
+unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu)
+{
+ return ARRAY_SIZE(invariant_cp15)
+ + num_demux_regs()
+ + num_vfp_regs()
+ + walk_cp15(vcpu, (u64 __user *)NULL);
+}
+
+int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+ unsigned int i;
+ int err;
+
+ /* Then give them all the invariant registers' indices. */
+ for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) {
+ if (put_user(cp15_to_index(&invariant_cp15[i]), uindices))
+ return -EFAULT;
+ uindices++;
+ }
+
+ err = walk_cp15(vcpu, uindices);
+ if (err < 0)
+ return err;
+ uindices += err;
+
+ err = copy_vfp_regids(uindices);
+ if (err < 0)
+ return err;
+ uindices += err;
+
+ return write_demux_regids(uindices);
+}
+
+void kvm_coproc_table_init(void)
+{
+ unsigned int i;
+
+ /* Make sure tables are unique and in order. */
+ for (i = 1; i < ARRAY_SIZE(cp15_regs); i++)
+ BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0);
+
+ /* We abuse the reset function to overwrite the table itself. */
+ for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++)
+ invariant_cp15[i].reset(NULL, &invariant_cp15[i]);
+
+ /*
+ * CLIDR format is awkward, so clean it up. See ARM B4.1.20:
+ *
+ * If software reads the Cache Type fields from Ctype1
+ * upwards, once it has seen a value of 0b000, no caches
+ * exist at further-out levels of the hierarchy. So, for
+ * example, if Ctype3 is the first Cache Type field with a
+ * value of 0b000, the values of Ctype4 to Ctype7 must be
+ * ignored.
+ */
+ asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (cache_levels));
+ for (i = 0; i < 7; i++)
+ if (((cache_levels >> (i*3)) & 7) == 0)
+ break;
+ /* Clear all higher bits. */
+ cache_levels &= (1 << (i*3))-1;
+}
+
+/**
+ * kvm_reset_coprocs - sets cp15 registers to reset value
+ * @vcpu: The VCPU pointer
+ *
+ * This function finds the right table above and sets the registers on the
+ * virtual CPU struct to their architecturally defined reset values.
+ */
+void kvm_reset_coprocs(struct kvm_vcpu *vcpu)
+{
+ size_t num;
+ const struct coproc_reg *table;
+
+ /* Catch someone adding a register without putting in reset entry. */
+ memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15));
+
+ /* Generic chip reset first (so target could override). */
+ reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs));
+
+ table = get_target_table(vcpu->arch.target, &num);
+ reset_coproc_regs(vcpu, table, num);
+
+ for (num = 1; num < NR_CP15_REGS; num++)
+ if (vcpu->arch.cp15[num] == 0x42424242)
+ panic("Didn't reset vcpu->arch.cp15[%zi]", num);
+}
diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h
new file mode 100644
index 0000000..992adfa
--- /dev/null
+++ b/arch/arm/kvm/coproc.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Authors: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_COPROC_LOCAL_H__
+#define __ARM_KVM_COPROC_LOCAL_H__
+
+struct coproc_params {
+ unsigned long CRn;
+ unsigned long CRm;
+ unsigned long Op1;
+ unsigned long Op2;
+ unsigned long Rt1;
+ unsigned long Rt2;
+ bool is_64bit;
+ bool is_write;
+};
+
+struct coproc_reg {
+ /* MRC/MCR/MRRC/MCRR instruction which accesses it. */
+ unsigned long CRn;
+ unsigned long CRm;
+ unsigned long Op1;
+ unsigned long Op2;
+
+ bool is_64;
+
+ /* Trapped access from guest, if non-NULL. */
+ bool (*access)(struct kvm_vcpu *,
+ const struct coproc_params *,
+ const struct coproc_reg *);
+
+ /* Initialization for vcpu. */
+ void (*reset)(struct kvm_vcpu *, const struct coproc_reg *);
+
+ /* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */
+ unsigned long reg;
+
+ /* Value (usually reset value) */
+ u64 val;
+};
+
+static inline void print_cp_instr(const struct coproc_params *p)
+{
+ /* Look, we even formatted it for you to paste into the table! */
+ if (p->is_64bit) {
+ kvm_pr_unimpl(" { CRm(%2lu), Op1(%2lu), is64, func_%s },\n",
+ p->CRm, p->Op1, p->is_write ? "write" : "read");
+ } else {
+ kvm_pr_unimpl(" { CRn(%2lu), CRm(%2lu), Op1(%2lu), Op2(%2lu), is32,"
+ " func_%s },\n",
+ p->CRn, p->CRm, p->Op1, p->Op2,
+ p->is_write ? "write" : "read");
+ }
+}
+
+static inline bool ignore_write(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p)
+{
+ return true;
+}
+
+static inline bool read_zero(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p)
+{
+ *vcpu_reg(vcpu, p->Rt1) = 0;
+ return true;
+}
+
+static inline bool write_to_read_only(struct kvm_vcpu *vcpu,
+ const struct coproc_params *params)
+{
+ kvm_debug("CP15 write to read-only register at: %08x\n",
+ *vcpu_pc(vcpu));
+ print_cp_instr(params);
+ return false;
+}
+
+static inline bool read_from_write_only(struct kvm_vcpu *vcpu,
+ const struct coproc_params *params)
+{
+ kvm_debug("CP15 read to write-only register at: %08x\n",
+ *vcpu_pc(vcpu));
+ print_cp_instr(params);
+ return false;
+}
+
+/* Reset functions */
+static inline void reset_unknown(struct kvm_vcpu *vcpu,
+ const struct coproc_reg *r)
+{
+ BUG_ON(!r->reg);
+ BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
+ vcpu->arch.cp15[r->reg] = 0xdecafbad;
+}
+
+static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ BUG_ON(!r->reg);
+ BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
+ vcpu->arch.cp15[r->reg] = r->val;
+}
+
+static inline void reset_unknown64(struct kvm_vcpu *vcpu,
+ const struct coproc_reg *r)
+{
+ BUG_ON(!r->reg);
+ BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15));
+
+ vcpu->arch.cp15[r->reg] = 0xdecafbad;
+ vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee;
+}
+
+static inline int cmp_reg(const struct coproc_reg *i1,
+ const struct coproc_reg *i2)
+{
+ BUG_ON(i1 == i2);
+ if (!i1)
+ return 1;
+ else if (!i2)
+ return -1;
+ if (i1->CRn != i2->CRn)
+ return i1->CRn - i2->CRn;
+ if (i1->CRm != i2->CRm)
+ return i1->CRm - i2->CRm;
+ if (i1->Op1 != i2->Op1)
+ return i1->Op1 - i2->Op1;
+ return i1->Op2 - i2->Op2;
+}
+
+
+#define CRn(_x) .CRn = _x
+#define CRm(_x) .CRm = _x
+#define Op1(_x) .Op1 = _x
+#define Op2(_x) .Op2 = _x
+#define is64 .is_64 = true
+#define is32 .is_64 = false
+
+#endif /* __ARM_KVM_COPROC_LOCAL_H__ */
diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c
new file mode 100644
index 0000000..685063a
--- /dev/null
+++ b/arch/arm/kvm/coproc_a15.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Authors: Rusty Russell <rusty@rustcorp.au>
+ * Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <linux/kvm_host.h>
+#include <asm/cputype.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_coproc.h>
+#include <linux/init.h>
+
+static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ /*
+ * Compute guest MPIDR:
+ * (Even if we present only one VCPU to the guest on an SMP
+ * host we don't set the U bit in the MPIDR, or vice versa, as
+ * revealing the underlying hardware properties is likely to
+ * be the best choice).
+ */
+ vcpu->arch.cp15[c0_MPIDR] = (read_cpuid_mpidr() & ~MPIDR_LEVEL_MASK)
+ | (vcpu->vcpu_id & MPIDR_LEVEL_MASK);
+}
+
+#include "coproc.h"
+
+/* A15 TRM 4.3.28: RO WI */
+static bool access_actlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
+ return true;
+}
+
+/* A15 TRM 4.3.60: R/O. */
+static bool access_cbar(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return write_to_read_only(vcpu, p);
+ return read_zero(vcpu, p);
+}
+
+/* A15 TRM 4.3.48: R/O WI. */
+static bool access_l2ctlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
+ return true;
+}
+
+static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ u32 l2ctlr, ncores;
+
+ asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
+ l2ctlr &= ~(3 << 24);
+ ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
+ l2ctlr |= (ncores & 3) << 24;
+
+ vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
+}
+
+static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ u32 actlr;
+
+ /* ACTLR contains SMP bit: make sure you create all cpus first! */
+ asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+ /* Make the SMP bit consistent with the guest configuration */
+ if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
+ actlr |= 1U << 6;
+ else
+ actlr &= ~(1U << 6);
+
+ vcpu->arch.cp15[c1_ACTLR] = actlr;
+}
+
+/* A15 TRM 4.3.49: R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored). */
+static bool access_l2ectlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = 0;
+ return true;
+}
+
+/*
+ * A15-specific CP15 registers.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2
+ */
+static const struct coproc_reg a15_regs[] = {
+ /* MPIDR: we use VMPIDR for guest access. */
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
+ NULL, reset_mpidr, c0_MPIDR },
+
+ /* SCTLR: swapped by interrupt.S. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_val, c1_SCTLR, 0x00C50078 },
+ /* ACTLR: trapped by HCR.TAC bit. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
+ access_actlr, reset_actlr, c1_ACTLR },
+ /* CPACR: swapped by interrupt.S. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
+ NULL, reset_val, c1_CPACR, 0x00000000 },
+
+ /*
+ * L2CTLR access (guest wants to know #CPUs).
+ */
+ { CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
+ access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
+ { CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
+
+ /* The Configuration Base Address Register. */
+ { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
+};
+
+static struct kvm_coproc_target_table a15_target_table = {
+ .target = KVM_ARM_TARGET_CORTEX_A15,
+ .table = a15_regs,
+ .num = ARRAY_SIZE(a15_regs),
+};
+
+static int __init coproc_a15_init(void)
+{
+ unsigned int i;
+
+ for (i = 1; i < ARRAY_SIZE(a15_regs); i++)
+ BUG_ON(cmp_reg(&a15_regs[i-1],
+ &a15_regs[i]) >= 0);
+
+ kvm_register_target_coproc_table(&a15_target_table);
+ return 0;
+}
+late_initcall(coproc_a15_init);
diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c
new file mode 100644
index 0000000..d61450a
--- /dev/null
+++ b/arch/arm/kvm/emulate.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_emulate.h>
+#include <trace/events/kvm.h>
+
+#include "trace.h"
+
+#define VCPU_NR_MODES 6
+#define VCPU_REG_OFFSET_USR 0
+#define VCPU_REG_OFFSET_FIQ 1
+#define VCPU_REG_OFFSET_IRQ 2
+#define VCPU_REG_OFFSET_SVC 3
+#define VCPU_REG_OFFSET_ABT 4
+#define VCPU_REG_OFFSET_UND 5
+#define REG_OFFSET(_reg) \
+ (offsetof(struct kvm_regs, _reg) / sizeof(u32))
+
+#define USR_REG_OFFSET(_num) REG_OFFSET(usr_regs.uregs[_num])
+
+static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = {
+ /* USR/SYS Registers */
+ [VCPU_REG_OFFSET_USR] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8),
+ USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11),
+ USR_REG_OFFSET(12), USR_REG_OFFSET(13), USR_REG_OFFSET(14),
+ },
+
+ /* FIQ Registers */
+ [VCPU_REG_OFFSET_FIQ] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7),
+ REG_OFFSET(fiq_regs[0]), /* r8 */
+ REG_OFFSET(fiq_regs[1]), /* r9 */
+ REG_OFFSET(fiq_regs[2]), /* r10 */
+ REG_OFFSET(fiq_regs[3]), /* r11 */
+ REG_OFFSET(fiq_regs[4]), /* r12 */
+ REG_OFFSET(fiq_regs[5]), /* r13 */
+ REG_OFFSET(fiq_regs[6]), /* r14 */
+ },
+
+ /* IRQ Registers */
+ [VCPU_REG_OFFSET_IRQ] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8),
+ USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11),
+ USR_REG_OFFSET(12),
+ REG_OFFSET(irq_regs[0]), /* r13 */
+ REG_OFFSET(irq_regs[1]), /* r14 */
+ },
+
+ /* SVC Registers */
+ [VCPU_REG_OFFSET_SVC] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8),
+ USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11),
+ USR_REG_OFFSET(12),
+ REG_OFFSET(svc_regs[0]), /* r13 */
+ REG_OFFSET(svc_regs[1]), /* r14 */
+ },
+
+ /* ABT Registers */
+ [VCPU_REG_OFFSET_ABT] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8),
+ USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11),
+ USR_REG_OFFSET(12),
+ REG_OFFSET(abt_regs[0]), /* r13 */
+ REG_OFFSET(abt_regs[1]), /* r14 */
+ },
+
+ /* UND Registers */
+ [VCPU_REG_OFFSET_UND] = {
+ USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2),
+ USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5),
+ USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8),
+ USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11),
+ USR_REG_OFFSET(12),
+ REG_OFFSET(und_regs[0]), /* r13 */
+ REG_OFFSET(und_regs[1]), /* r14 */
+ },
+};
+
+/*
+ * Return a pointer to the register number valid in the current mode of
+ * the virtual CPU.
+ */
+u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num)
+{
+ u32 *reg_array = (u32 *)&vcpu->arch.regs;
+ u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK;
+
+ switch (mode) {
+ case USR_MODE...SVC_MODE:
+ mode &= ~MODE32_BIT; /* 0 ... 3 */
+ break;
+
+ case ABT_MODE:
+ mode = VCPU_REG_OFFSET_ABT;
+ break;
+
+ case UND_MODE:
+ mode = VCPU_REG_OFFSET_UND;
+ break;
+
+ case SYSTEM_MODE:
+ mode = VCPU_REG_OFFSET_USR;
+ break;
+
+ default:
+ BUG();
+ }
+
+ return reg_array + vcpu_reg_offsets[mode][reg_num];
+}
+
+/*
+ * Return the SPSR for the current mode of the virtual CPU.
+ */
+u32 *vcpu_spsr(struct kvm_vcpu *vcpu)
+{
+ u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK;
+ switch (mode) {
+ case SVC_MODE:
+ return &vcpu->arch.regs.KVM_ARM_SVC_spsr;
+ case ABT_MODE:
+ return &vcpu->arch.regs.KVM_ARM_ABT_spsr;
+ case UND_MODE:
+ return &vcpu->arch.regs.KVM_ARM_UND_spsr;
+ case IRQ_MODE:
+ return &vcpu->arch.regs.KVM_ARM_IRQ_spsr;
+ case FIQ_MODE:
+ return &vcpu->arch.regs.KVM_ARM_FIQ_spsr;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest
+ * @vcpu: the vcpu pointer
+ * @run: the kvm_run structure pointer
+ *
+ * Simply sets the wait_for_interrupts flag on the vcpu structure, which will
+ * halt execution of world-switches and schedule other host processes until
+ * there is an incoming IRQ or FIQ to the VM.
+ */
+int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ trace_kvm_wfi(*vcpu_pc(vcpu));
+ kvm_vcpu_block(vcpu);
+ return 1;
+}
+
+/**
+ * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block
+ * @vcpu: The VCPU pointer
+ *
+ * When exceptions occur while instructions are executed in Thumb IF-THEN
+ * blocks, the ITSTATE field of the CPSR is not advanved (updated), so we have
+ * to do this little bit of work manually. The fields map like this:
+ *
+ * IT[7:0] -> CPSR[26:25],CPSR[15:10]
+ */
+static void kvm_adjust_itstate(struct kvm_vcpu *vcpu)
+{
+ unsigned long itbits, cond;
+ unsigned long cpsr = *vcpu_cpsr(vcpu);
+ bool is_arm = !(cpsr & PSR_T_BIT);
+
+ BUG_ON(is_arm && (cpsr & PSR_IT_MASK));
+
+ if (!(cpsr & PSR_IT_MASK))
+ return;
+
+ cond = (cpsr & 0xe000) >> 13;
+ itbits = (cpsr & 0x1c00) >> (10 - 2);
+ itbits |= (cpsr & (0x3 << 25)) >> 25;
+
+ /* Perform ITAdvance (see page A-52 in ARM DDI 0406C) */
+ if ((itbits & 0x7) == 0)
+ itbits = cond = 0;
+ else
+ itbits = (itbits << 1) & 0x1f;
+
+ cpsr &= ~PSR_IT_MASK;
+ cpsr |= cond << 13;
+ cpsr |= (itbits & 0x1c) << (10 - 2);
+ cpsr |= (itbits & 0x3) << 25;
+ *vcpu_cpsr(vcpu) = cpsr;
+}
+
+/**
+ * kvm_skip_instr - skip a trapped instruction and proceed to the next
+ * @vcpu: The vcpu pointer
+ */
+void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
+{
+ bool is_thumb;
+
+ is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_T_BIT);
+ if (is_thumb && !is_wide_instr)
+ *vcpu_pc(vcpu) += 2;
+ else
+ *vcpu_pc(vcpu) += 4;
+ kvm_adjust_itstate(vcpu);
+}
+
+
+/******************************************************************************
+ * Inject exceptions into the guest
+ */
+
+static u32 exc_vector_base(struct kvm_vcpu *vcpu)
+{
+ u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
+ u32 vbar = vcpu->arch.cp15[c12_VBAR];
+
+ if (sctlr & SCTLR_V)
+ return 0xffff0000;
+ else /* always have security exceptions */
+ return vbar;
+}
+
+/**
+ * kvm_inject_undefined - inject an undefined exception into the guest
+ * @vcpu: The VCPU to receive the undefined exception
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ *
+ * Modelled after TakeUndefInstrException() pseudocode.
+ */
+void kvm_inject_undefined(struct kvm_vcpu *vcpu)
+{
+ u32 new_lr_value;
+ u32 new_spsr_value;
+ u32 cpsr = *vcpu_cpsr(vcpu);
+ u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
+ bool is_thumb = (cpsr & PSR_T_BIT);
+ u32 vect_offset = 4;
+ u32 return_offset = (is_thumb) ? 2 : 4;
+
+ new_spsr_value = cpsr;
+ new_lr_value = *vcpu_pc(vcpu) - return_offset;
+
+ *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | UND_MODE;
+ *vcpu_cpsr(vcpu) |= PSR_I_BIT;
+ *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
+
+ if (sctlr & SCTLR_TE)
+ *vcpu_cpsr(vcpu) |= PSR_T_BIT;
+ if (sctlr & SCTLR_EE)
+ *vcpu_cpsr(vcpu) |= PSR_E_BIT;
+
+ /* Note: These now point to UND banked copies */
+ *vcpu_spsr(vcpu) = cpsr;
+ *vcpu_reg(vcpu, 14) = new_lr_value;
+
+ /* Branch to exception vector */
+ *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset;
+}
+
+/*
+ * Modelled after TakeDataAbortException() and TakePrefetchAbortException
+ * pseudocode.
+ */
+static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
+{
+ u32 new_lr_value;
+ u32 new_spsr_value;
+ u32 cpsr = *vcpu_cpsr(vcpu);
+ u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
+ bool is_thumb = (cpsr & PSR_T_BIT);
+ u32 vect_offset;
+ u32 return_offset = (is_thumb) ? 4 : 0;
+ bool is_lpae;
+
+ new_spsr_value = cpsr;
+ new_lr_value = *vcpu_pc(vcpu) + return_offset;
+
+ *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | ABT_MODE;
+ *vcpu_cpsr(vcpu) |= PSR_I_BIT | PSR_A_BIT;
+ *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
+
+ if (sctlr & SCTLR_TE)
+ *vcpu_cpsr(vcpu) |= PSR_T_BIT;
+ if (sctlr & SCTLR_EE)
+ *vcpu_cpsr(vcpu) |= PSR_E_BIT;
+
+ /* Note: These now point to ABT banked copies */
+ *vcpu_spsr(vcpu) = cpsr;
+ *vcpu_reg(vcpu, 14) = new_lr_value;
+
+ if (is_pabt)
+ vect_offset = 12;
+ else
+ vect_offset = 16;
+
+ /* Branch to exception vector */
+ *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset;
+
+ if (is_pabt) {
+ /* Set DFAR and DFSR */
+ vcpu->arch.cp15[c6_IFAR] = addr;
+ is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+ /* Always give debug fault for now - should give guest a clue */
+ if (is_lpae)
+ vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22;
+ else
+ vcpu->arch.cp15[c5_IFSR] = 2;
+ } else { /* !iabt */
+ /* Set DFAR and DFSR */
+ vcpu->arch.cp15[c6_DFAR] = addr;
+ is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+ /* Always give debug fault for now - should give guest a clue */
+ if (is_lpae)
+ vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22;
+ else
+ vcpu->arch.cp15[c5_DFSR] = 2;
+ }
+
+}
+
+/**
+ * kvm_inject_dabt - inject a data abort into the guest
+ * @vcpu: The VCPU to receive the undefined exception
+ * @addr: The address to report in the DFAR
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr)
+{
+ inject_abt(vcpu, false, addr);
+}
+
+/**
+ * kvm_inject_pabt - inject a prefetch abort into the guest
+ * @vcpu: The VCPU to receive the undefined exception
+ * @addr: The address to report in the DFAR
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr)
+{
+ inject_abt(vcpu, true, addr);
+}
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
new file mode 100644
index 0000000..2339d96
--- /dev/null
+++ b/arch/arm/kvm/guest.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kvm_host.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/kvm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_coproc.h>
+
+#define VM_STAT(x) { #x, offsetof(struct kvm, stat.x), KVM_STAT_VM }
+#define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU }
+
+struct kvm_stats_debugfs_item debugfs_entries[] = {
+ { NULL }
+};
+
+int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+static u64 core_reg_offset_from_id(u64 id)
+{
+ return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE);
+}
+
+static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ u32 __user *uaddr = (u32 __user *)(long)reg->addr;
+ struct kvm_regs *regs = &vcpu->arch.regs;
+ u64 off;
+
+ if (KVM_REG_SIZE(reg->id) != 4)
+ return -ENOENT;
+
+ /* Our ID is an index into the kvm_regs struct. */
+ off = core_reg_offset_from_id(reg->id);
+ if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id))
+ return -ENOENT;
+
+ return put_user(((u32 *)regs)[off], uaddr);
+}
+
+static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ u32 __user *uaddr = (u32 __user *)(long)reg->addr;
+ struct kvm_regs *regs = &vcpu->arch.regs;
+ u64 off, val;
+
+ if (KVM_REG_SIZE(reg->id) != 4)
+ return -ENOENT;
+
+ /* Our ID is an index into the kvm_regs struct. */
+ off = core_reg_offset_from_id(reg->id);
+ if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id))
+ return -ENOENT;
+
+ if (get_user(val, uaddr) != 0)
+ return -EFAULT;
+
+ if (off == KVM_REG_ARM_CORE_REG(usr_regs.ARM_cpsr)) {
+ unsigned long mode = val & MODE_MASK;
+ switch (mode) {
+ case USR_MODE:
+ case FIQ_MODE:
+ case IRQ_MODE:
+ case SVC_MODE:
+ case ABT_MODE:
+ case UND_MODE:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ ((u32 *)regs)[off] = val;
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ return -EINVAL;
+}
+
+static unsigned long num_core_regs(void)
+{
+ return sizeof(struct kvm_regs) / sizeof(u32);
+}
+
+/**
+ * kvm_arm_num_regs - how many registers do we present via KVM_GET_ONE_REG
+ *
+ * This is for all registers.
+ */
+unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
+{
+ return num_core_regs() + kvm_arm_num_coproc_regs(vcpu);
+}
+
+/**
+ * kvm_arm_copy_reg_indices - get indices of all registers.
+ *
+ * We do core registers right here, then we apppend coproc regs.
+ */
+int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+ unsigned int i;
+ const u64 core_reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_CORE;
+
+ for (i = 0; i < sizeof(struct kvm_regs)/sizeof(u32); i++) {
+ if (put_user(core_reg | i, uindices))
+ return -EFAULT;
+ uindices++;
+ }
+
+ return kvm_arm_copy_coproc_indices(vcpu, uindices);
+}
+
+int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ /* We currently use nothing arch-specific in upper 32 bits */
+ if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32)
+ return -EINVAL;
+
+ /* Register group 16 means we want a core register. */
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
+ return get_core_reg(vcpu, reg);
+
+ return kvm_arm_coproc_get_reg(vcpu, reg);
+}
+
+int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+ /* We currently use nothing arch-specific in upper 32 bits */
+ if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32)
+ return -EINVAL;
+
+ /* Register group 16 means we set a core register. */
+ if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
+ return set_core_reg(vcpu, reg);
+
+ return kvm_arm_coproc_set_reg(vcpu, reg);
+}
+
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ return -EINVAL;
+}
+
+int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
+ const struct kvm_vcpu_init *init)
+{
+ unsigned int i;
+
+ /* We can only do a cortex A15 for now. */
+ if (init->target != kvm_target_cpu())
+ return -EINVAL;
+
+ vcpu->arch.target = init->target;
+ bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
+
+ /* -ENOENT for unknown features, -EINVAL for invalid combinations. */
+ for (i = 0; i < sizeof(init->features) * 8; i++) {
+ if (test_bit(i, (void *)init->features)) {
+ if (i >= KVM_VCPU_MAX_FEATURES)
+ return -ENOENT;
+ set_bit(i, vcpu->arch.features);
+ }
+ }
+
+ /* Now we know what it is, we can reset it. */
+ return kvm_reset_vcpu(vcpu);
+}
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+ struct kvm_translation *tr)
+{
+ return -EINVAL;
+}
diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
new file mode 100644
index 0000000..9f37a79
--- /dev/null
+++ b/arch/arm/kvm/init.S
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <asm/unified.h>
+#include <asm/asm-offsets.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_arm.h>
+
+/********************************************************************
+ * Hypervisor initialization
+ * - should be called with:
+ * r0,r1 = Hypervisor pgd pointer
+ * r2 = top of Hyp stack (kernel VA)
+ * r3 = pointer to hyp vectors
+ */
+
+ .text
+ .pushsection .hyp.idmap.text,"ax"
+ .align 5
+__kvm_hyp_init:
+ .globl __kvm_hyp_init
+
+ @ Hyp-mode exception vector
+ W(b) .
+ W(b) .
+ W(b) .
+ W(b) .
+ W(b) .
+ W(b) __do_hyp_init
+ W(b) .
+ W(b) .
+
+__do_hyp_init:
+ @ Set the HTTBR to point to the hypervisor PGD pointer passed
+ mcrr p15, 4, r0, r1, c2
+
+ @ Set the HTCR and VTCR to the same shareability and cacheability
+ @ settings as the non-secure TTBCR and with T0SZ == 0.
+ mrc p15, 4, r0, c2, c0, 2 @ HTCR
+ ldr r12, =HTCR_MASK
+ bic r0, r0, r12
+ mrc p15, 0, r1, c2, c0, 2 @ TTBCR
+ and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ)
+ orr r0, r0, r1
+ mcr p15, 4, r0, c2, c0, 2 @ HTCR
+
+ mrc p15, 4, r1, c2, c1, 2 @ VTCR
+ ldr r12, =VTCR_MASK
+ bic r1, r1, r12
+ bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits
+ orr r1, r0, r1
+ orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S)
+ mcr p15, 4, r1, c2, c1, 2 @ VTCR
+
+ @ Use the same memory attributes for hyp. accesses as the kernel
+ @ (copy MAIRx ro HMAIRx).
+ mrc p15, 0, r0, c10, c2, 0
+ mcr p15, 4, r0, c10, c2, 0
+ mrc p15, 0, r0, c10, c2, 1
+ mcr p15, 4, r0, c10, c2, 1
+
+ @ Set the HSCTLR to:
+ @ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel)
+ @ - Endianness: Kernel config
+ @ - Fast Interrupt Features: Kernel config
+ @ - Write permission implies XN: disabled
+ @ - Instruction cache: enabled
+ @ - Data/Unified cache: enabled
+ @ - Memory alignment checks: enabled
+ @ - MMU: enabled (this code must be run from an identity mapping)
+ mrc p15, 4, r0, c1, c0, 0 @ HSCR
+ ldr r12, =HSCTLR_MASK
+ bic r0, r0, r12
+ mrc p15, 0, r1, c1, c0, 0 @ SCTLR
+ ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
+ and r1, r1, r12
+ ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) )
+ THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
+ orr r1, r1, r12
+ orr r0, r0, r1
+ isb
+ mcr p15, 4, r0, c1, c0, 0 @ HSCR
+ isb
+
+ @ Set stack pointer and return to the kernel
+ mov sp, r2
+
+ @ Set HVBAR to point to the HYP vectors
+ mcr p15, 4, r3, c12, c0, 0 @ HVBAR
+
+ eret
+
+ .ltorg
+
+ .globl __kvm_hyp_init_end
+__kvm_hyp_init_end:
+
+ .popsection
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
new file mode 100644
index 0000000..c5400d2
--- /dev/null
+++ b/arch/arm/kvm/interrupts.S
@@ -0,0 +1,478 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/unified.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_arm.h>
+#include <asm/vfpmacros.h>
+#include "interrupts_head.S"
+
+ .text
+
+__kvm_hyp_code_start:
+ .globl __kvm_hyp_code_start
+
+/********************************************************************
+ * Flush per-VMID TLBs
+ *
+ * void __kvm_tlb_flush_vmid(struct kvm *kvm);
+ *
+ * We rely on the hardware to broadcast the TLB invalidation to all CPUs
+ * inside the inner-shareable domain (which is the case for all v7
+ * implementations). If we come across a non-IS SMP implementation, we'll
+ * have to use an IPI based mechanism. Until then, we stick to the simple
+ * hardware assisted version.
+ */
+ENTRY(__kvm_tlb_flush_vmid)
+ push {r2, r3}
+
+ add r0, r0, #KVM_VTTBR
+ ldrd r2, r3, [r0]
+ mcrr p15, 6, r2, r3, c2 @ Write VTTBR
+ isb
+ mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored)
+ dsb
+ isb
+ mov r2, #0
+ mov r3, #0
+ mcrr p15, 6, r2, r3, c2 @ Back to VMID #0
+ isb @ Not necessary if followed by eret
+
+ pop {r2, r3}
+ bx lr
+ENDPROC(__kvm_tlb_flush_vmid)
+
+/********************************************************************
+ * Flush TLBs and instruction caches of all CPUs inside the inner-shareable
+ * domain, for all VMIDs
+ *
+ * void __kvm_flush_vm_context(void);
+ */
+ENTRY(__kvm_flush_vm_context)
+ mov r0, #0 @ rn parameter for c15 flushes is SBZ
+
+ /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */
+ mcr p15, 4, r0, c8, c3, 4
+ /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
+ mcr p15, 0, r0, c7, c1, 0
+ dsb
+ isb @ Not necessary if followed by eret
+
+ bx lr
+ENDPROC(__kvm_flush_vm_context)
+
+
+/********************************************************************
+ * Hypervisor world-switch code
+ *
+ *
+ * int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
+ */
+ENTRY(__kvm_vcpu_run)
+ @ Save the vcpu pointer
+ mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR
+
+ save_host_regs
+
+ @ Store hardware CP15 state and load guest state
+ read_cp15_state store_to_vcpu = 0
+ write_cp15_state read_from_vcpu = 1
+
+ @ If the host kernel has not been configured with VFPv3 support,
+ @ then it is safer if we deny guests from using it as well.
+#ifdef CONFIG_VFPv3
+ @ Set FPEXC_EN so the guest doesn't trap floating point instructions
+ VFPFMRX r2, FPEXC @ VMRS
+ push {r2}
+ orr r2, r2, #FPEXC_EN
+ VFPFMXR FPEXC, r2 @ VMSR
+#endif
+
+ @ Configure Hyp-role
+ configure_hyp_role vmentry
+
+ @ Trap coprocessor CRx accesses
+ set_hstr vmentry
+ set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
+ set_hdcr vmentry
+
+ @ Write configured ID register into MIDR alias
+ ldr r1, [vcpu, #VCPU_MIDR]
+ mcr p15, 4, r1, c0, c0, 0
+
+ @ Write guest view of MPIDR into VMPIDR
+ ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)]
+ mcr p15, 4, r1, c0, c0, 5
+
+ @ Set up guest memory translation
+ ldr r1, [vcpu, #VCPU_KVM]
+ add r1, r1, #KVM_VTTBR
+ ldrd r2, r3, [r1]
+ mcrr p15, 6, r2, r3, c2 @ Write VTTBR
+
+ @ We're all done, just restore the GPRs and go to the guest
+ restore_guest_regs
+ clrex @ Clear exclusive monitor
+ eret
+
+__kvm_vcpu_return:
+ /*
+ * return convention:
+ * guest r0, r1, r2 saved on the stack
+ * r0: vcpu pointer
+ * r1: exception code
+ */
+ save_guest_regs
+
+ @ Set VMID == 0
+ mov r2, #0
+ mov r3, #0
+ mcrr p15, 6, r2, r3, c2 @ Write VTTBR
+
+ @ Don't trap coprocessor accesses for host kernel
+ set_hstr vmexit
+ set_hdcr vmexit
+ set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
+
+#ifdef CONFIG_VFPv3
+ @ Save floating point registers we if let guest use them.
+ tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
+ bne after_vfp_restore
+
+ @ Switch VFP/NEON hardware state to the host's
+ add r7, vcpu, #VCPU_VFP_GUEST
+ store_vfp_state r7
+ add r7, vcpu, #VCPU_VFP_HOST
+ ldr r7, [r7]
+ restore_vfp_state r7
+
+after_vfp_restore:
+ @ Restore FPEXC_EN which we clobbered on entry
+ pop {r2}
+ VFPFMXR FPEXC, r2
+#endif
+
+ @ Reset Hyp-role
+ configure_hyp_role vmexit
+
+ @ Let host read hardware MIDR
+ mrc p15, 0, r2, c0, c0, 0
+ mcr p15, 4, r2, c0, c0, 0
+
+ @ Back to hardware MPIDR
+ mrc p15, 0, r2, c0, c0, 5
+ mcr p15, 4, r2, c0, c0, 5
+
+ @ Store guest CP15 state and restore host state
+ read_cp15_state store_to_vcpu = 1
+ write_cp15_state read_from_vcpu = 0
+
+ restore_host_regs
+ clrex @ Clear exclusive monitor
+ mov r0, r1 @ Return the return code
+ mov r1, #0 @ Clear upper bits in return value
+ bx lr @ return to IOCTL
+
+/********************************************************************
+ * Call function in Hyp mode
+ *
+ *
+ * u64 kvm_call_hyp(void *hypfn, ...);
+ *
+ * This is not really a variadic function in the classic C-way and care must
+ * be taken when calling this to ensure parameters are passed in registers
+ * only, since the stack will change between the caller and the callee.
+ *
+ * Call the function with the first argument containing a pointer to the
+ * function you wish to call in Hyp mode, and subsequent arguments will be
+ * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the
+ * function pointer can be passed). The function being called must be mapped
+ * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are
+ * passed in r0 and r1.
+ *
+ * The calling convention follows the standard AAPCS:
+ * r0 - r3: caller save
+ * r12: caller save
+ * rest: callee save
+ */
+ENTRY(kvm_call_hyp)
+ hvc #0
+ bx lr
+
+/********************************************************************
+ * Hypervisor exception vector and handlers
+ *
+ *
+ * The KVM/ARM Hypervisor ABI is defined as follows:
+ *
+ * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
+ * instruction is issued since all traps are disabled when running the host
+ * kernel as per the Hyp-mode initialization at boot time.
+ *
+ * HVC instructions cause a trap to the vector page + offset 0x18 (see hyp_hvc
+ * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
+ * host kernel) and they cause a trap to the vector page + offset 0xc when HVC
+ * instructions are called from within Hyp-mode.
+ *
+ * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
+ * Switching to Hyp mode is done through a simple HVC #0 instruction. The
+ * exception vector code will check that the HVC comes from VMID==0 and if
+ * so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
+ * - r0 contains a pointer to a HYP function
+ * - r1, r2, and r3 contain arguments to the above function.
+ * - The HYP function will be called with its arguments in r0, r1 and r2.
+ * On HYP function return, we return directly to SVC.
+ *
+ * Note that the above is used to execute code in Hyp-mode from a host-kernel
+ * point of view, and is a different concept from performing a world-switch and
+ * executing guest code SVC mode (with a VMID != 0).
+ */
+
+/* Handle undef, svc, pabt, or dabt by crashing with a user notice */
+.macro bad_exception exception_code, panic_str
+ push {r0-r2}
+ mrrc p15, 6, r0, r1, c2 @ Read VTTBR
+ lsr r1, r1, #16
+ ands r1, r1, #0xff
+ beq 99f
+
+ load_vcpu @ Load VCPU pointer
+ .if \exception_code == ARM_EXCEPTION_DATA_ABORT
+ mrc p15, 4, r2, c5, c2, 0 @ HSR
+ mrc p15, 4, r1, c6, c0, 0 @ HDFAR
+ str r2, [vcpu, #VCPU_HSR]
+ str r1, [vcpu, #VCPU_HxFAR]
+ .endif
+ .if \exception_code == ARM_EXCEPTION_PREF_ABORT
+ mrc p15, 4, r2, c5, c2, 0 @ HSR
+ mrc p15, 4, r1, c6, c0, 2 @ HIFAR
+ str r2, [vcpu, #VCPU_HSR]
+ str r1, [vcpu, #VCPU_HxFAR]
+ .endif
+ mov r1, #\exception_code
+ b __kvm_vcpu_return
+
+ @ We were in the host already. Let's craft a panic-ing return to SVC.
+99: mrs r2, cpsr
+ bic r2, r2, #MODE_MASK
+ orr r2, r2, #SVC_MODE
+THUMB( orr r2, r2, #PSR_T_BIT )
+ msr spsr_cxsf, r2
+ mrs r1, ELR_hyp
+ ldr r2, =BSYM(panic)
+ msr ELR_hyp, r2
+ ldr r0, =\panic_str
+ eret
+.endm
+
+ .text
+
+ .align 5
+__kvm_hyp_vector:
+ .globl __kvm_hyp_vector
+
+ @ Hyp-mode exception vector
+ W(b) hyp_reset
+ W(b) hyp_undef
+ W(b) hyp_svc
+ W(b) hyp_pabt
+ W(b) hyp_dabt
+ W(b) hyp_hvc
+ W(b) hyp_irq
+ W(b) hyp_fiq
+
+ .align
+hyp_reset:
+ b hyp_reset
+
+ .align
+hyp_undef:
+ bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str
+
+ .align
+hyp_svc:
+ bad_exception ARM_EXCEPTION_HVC, svc_die_str
+
+ .align
+hyp_pabt:
+ bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str
+
+ .align
+hyp_dabt:
+ bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str
+
+ .align
+hyp_hvc:
+ /*
+ * Getting here is either becuase of a trap from a guest or from calling
+ * HVC from the host kernel, which means "switch to Hyp mode".
+ */
+ push {r0, r1, r2}
+
+ @ Check syndrome register
+ mrc p15, 4, r1, c5, c2, 0 @ HSR
+ lsr r0, r1, #HSR_EC_SHIFT
+#ifdef CONFIG_VFPv3
+ cmp r0, #HSR_EC_CP_0_13
+ beq switch_to_guest_vfp
+#endif
+ cmp r0, #HSR_EC_HVC
+ bne guest_trap @ Not HVC instr.
+
+ /*
+ * Let's check if the HVC came from VMID 0 and allow simple
+ * switch to Hyp mode
+ */
+ mrrc p15, 6, r0, r2, c2
+ lsr r2, r2, #16
+ and r2, r2, #0xff
+ cmp r2, #0
+ bne guest_trap @ Guest called HVC
+
+host_switch_to_hyp:
+ pop {r0, r1, r2}
+
+ push {lr}
+ mrs lr, SPSR
+ push {lr}
+
+ mov lr, r0
+ mov r0, r1
+ mov r1, r2
+ mov r2, r3
+
+THUMB( orr lr, #1)
+ blx lr @ Call the HYP function
+
+ pop {lr}
+ msr SPSR_csxf, lr
+ pop {lr}
+ eret
+
+guest_trap:
+ load_vcpu @ Load VCPU pointer to r0
+ str r1, [vcpu, #VCPU_HSR]
+
+ @ Check if we need the fault information
+ lsr r1, r1, #HSR_EC_SHIFT
+ cmp r1, #HSR_EC_IABT
+ mrceq p15, 4, r2, c6, c0, 2 @ HIFAR
+ beq 2f
+ cmp r1, #HSR_EC_DABT
+ bne 1f
+ mrc p15, 4, r2, c6, c0, 0 @ HDFAR
+
+2: str r2, [vcpu, #VCPU_HxFAR]
+
+ /*
+ * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
+ *
+ * Abort on the stage 2 translation for a memory access from a
+ * Non-secure PL1 or PL0 mode:
+ *
+ * For any Access flag fault or Translation fault, and also for any
+ * Permission fault on the stage 2 translation of a memory access
+ * made as part of a translation table walk for a stage 1 translation,
+ * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
+ * is UNKNOWN.
+ */
+
+ /* Check for permission fault, and S1PTW */
+ mrc p15, 4, r1, c5, c2, 0 @ HSR
+ and r0, r1, #HSR_FSC_TYPE
+ cmp r0, #FSC_PERM
+ tsteq r1, #(1 << 7) @ S1PTW
+ mrcne p15, 4, r2, c6, c0, 4 @ HPFAR
+ bne 3f
+
+ /* Resolve IPA using the xFAR */
+ mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR
+ isb
+ mrrc p15, 0, r0, r1, c7 @ PAR
+ tst r0, #1
+ bne 4f @ Failed translation
+ ubfx r2, r0, #12, #20
+ lsl r2, r2, #4
+ orr r2, r2, r1, lsl #24
+
+3: load_vcpu @ Load VCPU pointer to r0
+ str r2, [r0, #VCPU_HPFAR]
+
+1: mov r1, #ARM_EXCEPTION_HVC
+ b __kvm_vcpu_return
+
+4: pop {r0, r1, r2} @ Failed translation, return to guest
+ eret
+
+/*
+ * If VFPv3 support is not available, then we will not switch the VFP
+ * registers; however cp10 and cp11 accesses will still trap and fallback
+ * to the regular coprocessor emulation code, which currently will
+ * inject an undefined exception to the guest.
+ */
+#ifdef CONFIG_VFPv3
+switch_to_guest_vfp:
+ load_vcpu @ Load VCPU pointer to r0
+ push {r3-r7}
+
+ @ NEON/VFP used. Turn on VFP access.
+ set_hcptr vmexit, (HCPTR_TCP(10) | HCPTR_TCP(11))
+
+ @ Switch VFP/NEON hardware state to the guest's
+ add r7, r0, #VCPU_VFP_HOST
+ ldr r7, [r7]
+ store_vfp_state r7
+ add r7, r0, #VCPU_VFP_GUEST
+ restore_vfp_state r7
+
+ pop {r3-r7}
+ pop {r0-r2}
+ eret
+#endif
+
+ .align
+hyp_irq:
+ push {r0, r1, r2}
+ mov r1, #ARM_EXCEPTION_IRQ
+ load_vcpu @ Load VCPU pointer to r0
+ b __kvm_vcpu_return
+
+ .align
+hyp_fiq:
+ b hyp_fiq
+
+ .ltorg
+
+__kvm_hyp_code_end:
+ .globl __kvm_hyp_code_end
+
+ .section ".rodata"
+
+und_die_str:
+ .ascii "unexpected undefined exception in Hyp mode at: %#08x"
+pabt_die_str:
+ .ascii "unexpected prefetch abort in Hyp mode at: %#08x"
+dabt_die_str:
+ .ascii "unexpected data abort in Hyp mode at: %#08x"
+svc_die_str:
+ .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x"
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
new file mode 100644
index 0000000..6a95d34
--- /dev/null
+++ b/arch/arm/kvm/interrupts_head.S
@@ -0,0 +1,441 @@
+#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4))
+#define VCPU_USR_SP (VCPU_USR_REG(13))
+#define VCPU_USR_LR (VCPU_USR_REG(14))
+#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4))
+
+/*
+ * Many of these macros need to access the VCPU structure, which is always
+ * held in r0. These macros should never clobber r1, as it is used to hold the
+ * exception code on the return path (except of course the macro that switches
+ * all the registers before the final jump to the VM).
+ */
+vcpu .req r0 @ vcpu pointer always in r0
+
+/* Clobbers {r2-r6} */
+.macro store_vfp_state vfp_base
+ @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
+ VFPFMRX r2, FPEXC
+ @ Make sure VFP is enabled so we can touch the registers.
+ orr r6, r2, #FPEXC_EN
+ VFPFMXR FPEXC, r6
+
+ VFPFMRX r3, FPSCR
+ tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
+ beq 1f
+ @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
+ @ we only need to save them if FPEXC_EX is set.
+ VFPFMRX r4, FPINST
+ tst r2, #FPEXC_FP2V
+ VFPFMRX r5, FPINST2, ne @ vmrsne
+ bic r6, r2, #FPEXC_EX @ FPEXC_EX disable
+ VFPFMXR FPEXC, r6
+1:
+ VFPFSTMIA \vfp_base, r6 @ Save VFP registers
+ stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2
+.endm
+
+/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
+.macro restore_vfp_state vfp_base
+ VFPFLDMIA \vfp_base, r6 @ Load VFP registers
+ ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2
+
+ VFPFMXR FPSCR, r3
+ tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
+ beq 1f
+ VFPFMXR FPINST, r4
+ tst r2, #FPEXC_FP2V
+ VFPFMXR FPINST2, r5, ne
+1:
+ VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN)
+.endm
+
+/* These are simply for the macros to work - value don't have meaning */
+.equ usr, 0
+.equ svc, 1
+.equ abt, 2
+.equ und, 3
+.equ irq, 4
+.equ fiq, 5
+
+.macro push_host_regs_mode mode
+ mrs r2, SP_\mode
+ mrs r3, LR_\mode
+ mrs r4, SPSR_\mode
+ push {r2, r3, r4}
+.endm
+
+/*
+ * Store all host persistent registers on the stack.
+ * Clobbers all registers, in all modes, except r0 and r1.
+ */
+.macro save_host_regs
+ /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
+ mrs r2, ELR_hyp
+ push {r2}
+
+ /* usr regs */
+ push {r4-r12} @ r0-r3 are always clobbered
+ mrs r2, SP_usr
+ mov r3, lr
+ push {r2, r3}
+
+ push_host_regs_mode svc
+ push_host_regs_mode abt
+ push_host_regs_mode und
+ push_host_regs_mode irq
+
+ /* fiq regs */
+ mrs r2, r8_fiq
+ mrs r3, r9_fiq
+ mrs r4, r10_fiq
+ mrs r5, r11_fiq
+ mrs r6, r12_fiq
+ mrs r7, SP_fiq
+ mrs r8, LR_fiq
+ mrs r9, SPSR_fiq
+ push {r2-r9}
+.endm
+
+.macro pop_host_regs_mode mode
+ pop {r2, r3, r4}
+ msr SP_\mode, r2
+ msr LR_\mode, r3
+ msr SPSR_\mode, r4
+.endm
+
+/*
+ * Restore all host registers from the stack.
+ * Clobbers all registers, in all modes, except r0 and r1.
+ */
+.macro restore_host_regs
+ pop {r2-r9}
+ msr r8_fiq, r2
+ msr r9_fiq, r3
+ msr r10_fiq, r4
+ msr r11_fiq, r5
+ msr r12_fiq, r6
+ msr SP_fiq, r7
+ msr LR_fiq, r8
+ msr SPSR_fiq, r9
+
+ pop_host_regs_mode irq
+ pop_host_regs_mode und
+ pop_host_regs_mode abt
+ pop_host_regs_mode svc
+
+ pop {r2, r3}
+ msr SP_usr, r2
+ mov lr, r3
+ pop {r4-r12}
+
+ pop {r2}
+ msr ELR_hyp, r2
+.endm
+
+/*
+ * Restore SP, LR and SPSR for a given mode. offset is the offset of
+ * this mode's registers from the VCPU base.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r1, r2, r3, r4.
+ */
+.macro restore_guest_regs_mode mode, offset
+ add r1, vcpu, \offset
+ ldm r1, {r2, r3, r4}
+ msr SP_\mode, r2
+ msr LR_\mode, r3
+ msr SPSR_\mode, r4
+.endm
+
+/*
+ * Restore all guest registers from the vcpu struct.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers *all* registers.
+ */
+.macro restore_guest_regs
+ restore_guest_regs_mode svc, #VCPU_SVC_REGS
+ restore_guest_regs_mode abt, #VCPU_ABT_REGS
+ restore_guest_regs_mode und, #VCPU_UND_REGS
+ restore_guest_regs_mode irq, #VCPU_IRQ_REGS
+
+ add r1, vcpu, #VCPU_FIQ_REGS
+ ldm r1, {r2-r9}
+ msr r8_fiq, r2
+ msr r9_fiq, r3
+ msr r10_fiq, r4
+ msr r11_fiq, r5
+ msr r12_fiq, r6
+ msr SP_fiq, r7
+ msr LR_fiq, r8
+ msr SPSR_fiq, r9
+
+ @ Load return state
+ ldr r2, [vcpu, #VCPU_PC]
+ ldr r3, [vcpu, #VCPU_CPSR]
+ msr ELR_hyp, r2
+ msr SPSR_cxsf, r3
+
+ @ Load user registers
+ ldr r2, [vcpu, #VCPU_USR_SP]
+ ldr r3, [vcpu, #VCPU_USR_LR]
+ msr SP_usr, r2
+ mov lr, r3
+ add vcpu, vcpu, #(VCPU_USR_REGS)
+ ldm vcpu, {r0-r12}
+.endm
+
+/*
+ * Save SP, LR and SPSR for a given mode. offset is the offset of
+ * this mode's registers from the VCPU base.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2, r3, r4, r5.
+ */
+.macro save_guest_regs_mode mode, offset
+ add r2, vcpu, \offset
+ mrs r3, SP_\mode
+ mrs r4, LR_\mode
+ mrs r5, SPSR_\mode
+ stm r2, {r3, r4, r5}
+.endm
+
+/*
+ * Save all guest registers to the vcpu struct
+ * Expects guest's r0, r1, r2 on the stack.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2, r3, r4, r5.
+ */
+.macro save_guest_regs
+ @ Store usr registers
+ add r2, vcpu, #VCPU_USR_REG(3)
+ stm r2, {r3-r12}
+ add r2, vcpu, #VCPU_USR_REG(0)
+ pop {r3, r4, r5} @ r0, r1, r2
+ stm r2, {r3, r4, r5}
+ mrs r2, SP_usr
+ mov r3, lr
+ str r2, [vcpu, #VCPU_USR_SP]
+ str r3, [vcpu, #VCPU_USR_LR]
+
+ @ Store return state
+ mrs r2, ELR_hyp
+ mrs r3, spsr
+ str r2, [vcpu, #VCPU_PC]
+ str r3, [vcpu, #VCPU_CPSR]
+
+ @ Store other guest registers
+ save_guest_regs_mode svc, #VCPU_SVC_REGS
+ save_guest_regs_mode abt, #VCPU_ABT_REGS
+ save_guest_regs_mode und, #VCPU_UND_REGS
+ save_guest_regs_mode irq, #VCPU_IRQ_REGS
+.endm
+
+/* Reads cp15 registers from hardware and stores them in memory
+ * @store_to_vcpu: If 0, registers are written in-order to the stack,
+ * otherwise to the VCPU struct pointed to by vcpup
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2 - r12
+ */
+.macro read_cp15_state store_to_vcpu
+ mrc p15, 0, r2, c1, c0, 0 @ SCTLR
+ mrc p15, 0, r3, c1, c0, 2 @ CPACR
+ mrc p15, 0, r4, c2, c0, 2 @ TTBCR
+ mrc p15, 0, r5, c3, c0, 0 @ DACR
+ mrrc p15, 0, r6, r7, c2 @ TTBR 0
+ mrrc p15, 1, r8, r9, c2 @ TTBR 1
+ mrc p15, 0, r10, c10, c2, 0 @ PRRR
+ mrc p15, 0, r11, c10, c2, 1 @ NMRR
+ mrc p15, 2, r12, c0, c0, 0 @ CSSELR
+
+ .if \store_to_vcpu == 0
+ push {r2-r12} @ Push CP15 registers
+ .else
+ str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
+ str r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
+ str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
+ str r5, [vcpu, #CP15_OFFSET(c3_DACR)]
+ add r2, vcpu, #CP15_OFFSET(c2_TTBR0)
+ strd r6, r7, [r2]
+ add r2, vcpu, #CP15_OFFSET(c2_TTBR1)
+ strd r8, r9, [r2]
+ str r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
+ str r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
+ str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
+ .endif
+
+ mrc p15, 0, r2, c13, c0, 1 @ CID
+ mrc p15, 0, r3, c13, c0, 2 @ TID_URW
+ mrc p15, 0, r4, c13, c0, 3 @ TID_URO
+ mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV
+ mrc p15, 0, r6, c5, c0, 0 @ DFSR
+ mrc p15, 0, r7, c5, c0, 1 @ IFSR
+ mrc p15, 0, r8, c5, c1, 0 @ ADFSR
+ mrc p15, 0, r9, c5, c1, 1 @ AIFSR
+ mrc p15, 0, r10, c6, c0, 0 @ DFAR
+ mrc p15, 0, r11, c6, c0, 2 @ IFAR
+ mrc p15, 0, r12, c12, c0, 0 @ VBAR
+
+ .if \store_to_vcpu == 0
+ push {r2-r12} @ Push CP15 registers
+ .else
+ str r2, [vcpu, #CP15_OFFSET(c13_CID)]
+ str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
+ str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
+ str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
+ str r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
+ str r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
+ str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
+ str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
+ str r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
+ str r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
+ str r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
+ .endif
+.endm
+
+/*
+ * Reads cp15 registers from memory and writes them to hardware
+ * @read_from_vcpu: If 0, registers are read in-order from the stack,
+ * otherwise from the VCPU struct pointed to by vcpup
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro write_cp15_state read_from_vcpu
+ .if \read_from_vcpu == 0
+ pop {r2-r12}
+ .else
+ ldr r2, [vcpu, #CP15_OFFSET(c13_CID)]
+ ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
+ ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
+ ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
+ ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
+ ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
+ ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
+ ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
+ ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
+ ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
+ ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
+ .endif
+
+ mcr p15, 0, r2, c13, c0, 1 @ CID
+ mcr p15, 0, r3, c13, c0, 2 @ TID_URW
+ mcr p15, 0, r4, c13, c0, 3 @ TID_URO
+ mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV
+ mcr p15, 0, r6, c5, c0, 0 @ DFSR
+ mcr p15, 0, r7, c5, c0, 1 @ IFSR
+ mcr p15, 0, r8, c5, c1, 0 @ ADFSR
+ mcr p15, 0, r9, c5, c1, 1 @ AIFSR
+ mcr p15, 0, r10, c6, c0, 0 @ DFAR
+ mcr p15, 0, r11, c6, c0, 2 @ IFAR
+ mcr p15, 0, r12, c12, c0, 0 @ VBAR
+
+ .if \read_from_vcpu == 0
+ pop {r2-r12}
+ .else
+ ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
+ ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
+ ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
+ ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)]
+ add r12, vcpu, #CP15_OFFSET(c2_TTBR0)
+ ldrd r6, r7, [r12]
+ add r12, vcpu, #CP15_OFFSET(c2_TTBR1)
+ ldrd r8, r9, [r12]
+ ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
+ ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
+ ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
+ .endif
+
+ mcr p15, 0, r2, c1, c0, 0 @ SCTLR
+ mcr p15, 0, r3, c1, c0, 2 @ CPACR
+ mcr p15, 0, r4, c2, c0, 2 @ TTBCR
+ mcr p15, 0, r5, c3, c0, 0 @ DACR
+ mcrr p15, 0, r6, r7, c2 @ TTBR 0
+ mcrr p15, 1, r8, r9, c2 @ TTBR 1
+ mcr p15, 0, r10, c10, c2, 0 @ PRRR
+ mcr p15, 0, r11, c10, c2, 1 @ NMRR
+ mcr p15, 2, r12, c0, c0, 0 @ CSSELR
+.endm
+
+/*
+ * Save the VGIC CPU state into memory
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro save_vgic_state
+.endm
+
+/*
+ * Restore the VGIC CPU state from memory
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro restore_vgic_state
+.endm
+
+.equ vmentry, 0
+.equ vmexit, 1
+
+/* Configures the HSTR (Hyp System Trap Register) on entry/return
+ * (hardware reset value is 0) */
+.macro set_hstr operation
+ mrc p15, 4, r2, c1, c1, 3
+ ldr r3, =HSTR_T(15)
+ .if \operation == vmentry
+ orr r2, r2, r3 @ Trap CR{15}
+ .else
+ bic r2, r2, r3 @ Don't trap any CRx accesses
+ .endif
+ mcr p15, 4, r2, c1, c1, 3
+.endm
+
+/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
+ * (hardware reset value is 0). Keep previous value in r2. */
+.macro set_hcptr operation, mask
+ mrc p15, 4, r2, c1, c1, 2
+ ldr r3, =\mask
+ .if \operation == vmentry
+ orr r3, r2, r3 @ Trap coproc-accesses defined in mask
+ .else
+ bic r3, r2, r3 @ Don't trap defined coproc-accesses
+ .endif
+ mcr p15, 4, r3, c1, c1, 2
+.endm
+
+/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
+ * (hardware reset value is 0) */
+.macro set_hdcr operation
+ mrc p15, 4, r2, c1, c1, 1
+ ldr r3, =(HDCR_TPM|HDCR_TPMCR)
+ .if \operation == vmentry
+ orr r2, r2, r3 @ Trap some perfmon accesses
+ .else
+ bic r2, r2, r3 @ Don't trap any perfmon accesses
+ .endif
+ mcr p15, 4, r2, c1, c1, 1
+.endm
+
+/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
+.macro configure_hyp_role operation
+ mrc p15, 4, r2, c1, c1, 0 @ HCR
+ bic r2, r2, #HCR_VIRT_EXCP_MASK
+ ldr r3, =HCR_GUEST_MASK
+ .if \operation == vmentry
+ orr r2, r2, r3
+ ldr r3, [vcpu, #VCPU_IRQ_LINES]
+ orr r2, r2, r3
+ .else
+ bic r2, r2, r3
+ .endif
+ mcr p15, 4, r2, c1, c1, 0
+.endm
+
+.macro load_vcpu
+ mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR
+.endm
diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
new file mode 100644
index 0000000..0144baf
--- /dev/null
+++ b/arch/arm/kvm/mmio.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_mmio.h>
+#include <asm/kvm_emulate.h>
+#include <trace/events/kvm.h>
+
+#include "trace.h"
+
+/**
+ * kvm_handle_mmio_return -- Handle MMIO loads after user space emulation
+ * @vcpu: The VCPU pointer
+ * @run: The VCPU run struct containing the mmio data
+ *
+ * This should only be called after returning from userspace for MMIO load
+ * emulation.
+ */
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ __u32 *dest;
+ unsigned int len;
+ int mask;
+
+ if (!run->mmio.is_write) {
+ dest = vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt);
+ memset(dest, 0, sizeof(int));
+
+ len = run->mmio.len;
+ if (len > 4)
+ return -EINVAL;
+
+ memcpy(dest, run->mmio.data, len);
+
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
+ *((u64 *)run->mmio.data));
+
+ if (vcpu->arch.mmio_decode.sign_extend && len < 4) {
+ mask = 1U << ((len * 8) - 1);
+ *dest = (*dest ^ mask) - mask;
+ }
+ }
+
+ return 0;
+}
+
+static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
+ struct kvm_exit_mmio *mmio)
+{
+ unsigned long rt, len;
+ bool is_write, sign_extend;
+
+ if ((vcpu->arch.hsr >> 8) & 1) {
+ /* cache operation on I/O addr, tell guest unsupported */
+ kvm_inject_dabt(vcpu, vcpu->arch.hxfar);
+ return 1;
+ }
+
+ if ((vcpu->arch.hsr >> 7) & 1) {
+ /* page table accesses IO mem: tell guest to fix its TTBR */
+ kvm_inject_dabt(vcpu, vcpu->arch.hxfar);
+ return 1;
+ }
+
+ switch ((vcpu->arch.hsr >> 22) & 0x3) {
+ case 0:
+ len = 1;
+ break;
+ case 1:
+ len = 2;
+ break;
+ case 2:
+ len = 4;
+ break;
+ default:
+ kvm_err("Hardware is weird: SAS 0b11 is reserved\n");
+ return -EFAULT;
+ }
+
+ is_write = vcpu->arch.hsr & HSR_WNR;
+ sign_extend = vcpu->arch.hsr & HSR_SSE;
+ rt = (vcpu->arch.hsr & HSR_SRT_MASK) >> HSR_SRT_SHIFT;
+
+ if (kvm_vcpu_reg_is_pc(vcpu, rt)) {
+ /* IO memory trying to read/write pc */
+ kvm_inject_pabt(vcpu, vcpu->arch.hxfar);
+ return 1;
+ }
+
+ mmio->is_write = is_write;
+ mmio->phys_addr = fault_ipa;
+ mmio->len = len;
+ vcpu->arch.mmio_decode.sign_extend = sign_extend;
+ vcpu->arch.mmio_decode.rt = rt;
+
+ /*
+ * The MMIO instruction is emulated and should not be re-executed
+ * in the guest.
+ */
+ kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1);
+ return 0;
+}
+
+int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ phys_addr_t fault_ipa)
+{
+ struct kvm_exit_mmio mmio;
+ unsigned long rt;
+ int ret;
+
+ /*
+ * Prepare MMIO operation. First stash it in a private
+ * structure that we can use for in-kernel emulation. If the
+ * kernel can't handle it, copy it into run->mmio and let user
+ * space do its magic.
+ */
+
+ if (vcpu->arch.hsr & HSR_ISV) {
+ ret = decode_hsr(vcpu, fault_ipa, &mmio);
+ if (ret)
+ return ret;
+ } else {
+ kvm_err("load/store instruction decoding not implemented\n");
+ return -ENOSYS;
+ }
+
+ rt = vcpu->arch.mmio_decode.rt;
+ trace_kvm_mmio((mmio.is_write) ? KVM_TRACE_MMIO_WRITE :
+ KVM_TRACE_MMIO_READ_UNSATISFIED,
+ mmio.len, fault_ipa,
+ (mmio.is_write) ? *vcpu_reg(vcpu, rt) : 0);
+
+ if (mmio.is_write)
+ memcpy(mmio.data, vcpu_reg(vcpu, rt), mmio.len);
+
+ kvm_prepare_mmio(run, &mmio);
+ return 0;
+}
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
new file mode 100644
index 0000000..f30e131
--- /dev/null
+++ b/arch/arm/kvm/mmu.c
@@ -0,0 +1,787 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/mman.h>
+#include <linux/kvm_host.h>
+#include <linux/io.h>
+#include <trace/events/kvm.h>
+#include <asm/idmap.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_mmio.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/mach/map.h>
+#include <trace/events/kvm.h>
+
+#include "trace.h"
+
+extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
+
+static DEFINE_MUTEX(kvm_hyp_pgd_mutex);
+
+static void kvm_tlb_flush_vmid(struct kvm *kvm)
+{
+ kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
+}
+
+static void kvm_set_pte(pte_t *pte, pte_t new_pte)
+{
+ pte_val(*pte) = new_pte;
+ /*
+ * flush_pmd_entry just takes a void pointer and cleans the necessary
+ * cache entries, so we can reuse the function for ptes.
+ */
+ flush_pmd_entry(pte);
+}
+
+static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
+ int min, int max)
+{
+ void *page;
+
+ BUG_ON(max > KVM_NR_MEM_OBJS);
+ if (cache->nobjs >= min)
+ return 0;
+ while (cache->nobjs < max) {
+ page = (void *)__get_free_page(PGALLOC_GFP);
+ if (!page)
+ return -ENOMEM;
+ cache->objects[cache->nobjs++] = page;
+ }
+ return 0;
+}
+
+static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc)
+{
+ while (mc->nobjs)
+ free_page((unsigned long)mc->objects[--mc->nobjs]);
+}
+
+static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
+{
+ void *p;
+
+ BUG_ON(!mc || !mc->nobjs);
+ p = mc->objects[--mc->nobjs];
+ return p;
+}
+
+static void free_ptes(pmd_t *pmd, unsigned long addr)
+{
+ pte_t *pte;
+ unsigned int i;
+
+ for (i = 0; i < PTRS_PER_PMD; i++, addr += PMD_SIZE) {
+ if (!pmd_none(*pmd) && pmd_table(*pmd)) {
+ pte = pte_offset_kernel(pmd, addr);
+ pte_free_kernel(NULL, pte);
+ }
+ pmd++;
+ }
+}
+
+/**
+ * free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables
+ *
+ * Assumes this is a page table used strictly in Hyp-mode and therefore contains
+ * only mappings in the kernel memory area, which is above PAGE_OFFSET.
+ */
+void free_hyp_pmds(void)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ unsigned long addr;
+
+ mutex_lock(&kvm_hyp_pgd_mutex);
+ for (addr = PAGE_OFFSET; addr != 0; addr += PGDIR_SIZE) {
+ pgd = hyp_pgd + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+
+ if (pud_none(*pud))
+ continue;
+ BUG_ON(pud_bad(*pud));
+
+ pmd = pmd_offset(pud, addr);
+ free_ptes(pmd, addr);
+ pmd_free(NULL, pmd);
+ pud_clear(pud);
+ }
+ mutex_unlock(&kvm_hyp_pgd_mutex);
+}
+
+static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start,
+ unsigned long end)
+{
+ pte_t *pte;
+ unsigned long addr;
+ struct page *page;
+
+ for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
+ pte = pte_offset_kernel(pmd, addr);
+ BUG_ON(!virt_addr_valid(addr));
+ page = virt_to_page(addr);
+ kvm_set_pte(pte, mk_pte(page, PAGE_HYP));
+ }
+}
+
+static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start,
+ unsigned long end,
+ unsigned long *pfn_base)
+{
+ pte_t *pte;
+ unsigned long addr;
+
+ for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
+ pte = pte_offset_kernel(pmd, addr);
+ BUG_ON(pfn_valid(*pfn_base));
+ kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE));
+ (*pfn_base)++;
+ }
+}
+
+static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
+ unsigned long end, unsigned long *pfn_base)
+{
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long addr, next;
+
+ for (addr = start; addr < end; addr = next) {
+ pmd = pmd_offset(pud, addr);
+
+ BUG_ON(pmd_sect(*pmd));
+
+ if (pmd_none(*pmd)) {
+ pte = pte_alloc_one_kernel(NULL, addr);
+ if (!pte) {
+ kvm_err("Cannot allocate Hyp pte\n");
+ return -ENOMEM;
+ }
+ pmd_populate_kernel(NULL, pmd, pte);
+ }
+
+ next = pmd_addr_end(addr, end);
+
+ /*
+ * If pfn_base is NULL, we map kernel pages into HYP with the
+ * virtual address. Otherwise, this is considered an I/O
+ * mapping and we map the physical region starting at
+ * *pfn_base to [start, end[.
+ */
+ if (!pfn_base)
+ create_hyp_pte_mappings(pmd, addr, next);
+ else
+ create_hyp_io_pte_mappings(pmd, addr, next, pfn_base);
+ }
+
+ return 0;
+}
+
+static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base)
+{
+ unsigned long start = (unsigned long)from;
+ unsigned long end = (unsigned long)to;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ unsigned long addr, next;
+ int err = 0;
+
+ BUG_ON(start > end);
+ if (start < PAGE_OFFSET)
+ return -EINVAL;
+
+ mutex_lock(&kvm_hyp_pgd_mutex);
+ for (addr = start; addr < end; addr = next) {
+ pgd = hyp_pgd + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+
+ if (pud_none_or_clear_bad(pud)) {
+ pmd = pmd_alloc_one(NULL, addr);
+ if (!pmd) {
+ kvm_err("Cannot allocate Hyp pmd\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ pud_populate(NULL, pud, pmd);
+ }
+
+ next = pgd_addr_end(addr, end);
+ err = create_hyp_pmd_mappings(pud, addr, next, pfn_base);
+ if (err)
+ goto out;
+ }
+out:
+ mutex_unlock(&kvm_hyp_pgd_mutex);
+ return err;
+}
+
+/**
+ * create_hyp_mappings - map a kernel virtual address range in Hyp mode
+ * @from: The virtual kernel start address of the range
+ * @to: The virtual kernel end address of the range (exclusive)
+ *
+ * The same virtual address as the kernel virtual address is also used in
+ * Hyp-mode mapping to the same underlying physical pages.
+ *
+ * Note: Wrapping around zero in the "to" address is not supported.
+ */
+int create_hyp_mappings(void *from, void *to)
+{
+ return __create_hyp_mappings(from, to, NULL);
+}
+
+/**
+ * create_hyp_io_mappings - map a physical IO range in Hyp mode
+ * @from: The virtual HYP start address of the range
+ * @to: The virtual HYP end address of the range (exclusive)
+ * @addr: The physical start address which gets mapped
+ */
+int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr)
+{
+ unsigned long pfn = __phys_to_pfn(addr);
+ return __create_hyp_mappings(from, to, &pfn);
+}
+
+/**
+ * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation.
+ * @kvm: The KVM struct pointer for the VM.
+ *
+ * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can
+ * support either full 40-bit input addresses or limited to 32-bit input
+ * addresses). Clears the allocated pages.
+ *
+ * Note we don't need locking here as this is only called when the VM is
+ * created, which can only be done once.
+ */
+int kvm_alloc_stage2_pgd(struct kvm *kvm)
+{
+ pgd_t *pgd;
+
+ if (kvm->arch.pgd != NULL) {
+ kvm_err("kvm_arch already initialized?\n");
+ return -EINVAL;
+ }
+
+ pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, S2_PGD_ORDER);
+ if (!pgd)
+ return -ENOMEM;
+
+ /* stage-2 pgd must be aligned to its size */
+ VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1));
+
+ memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t));
+ clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t));
+ kvm->arch.pgd = pgd;
+
+ return 0;
+}
+
+static void clear_pud_entry(pud_t *pud)
+{
+ pmd_t *pmd_table = pmd_offset(pud, 0);
+ pud_clear(pud);
+ pmd_free(NULL, pmd_table);
+ put_page(virt_to_page(pud));
+}
+
+static void clear_pmd_entry(pmd_t *pmd)
+{
+ pte_t *pte_table = pte_offset_kernel(pmd, 0);
+ pmd_clear(pmd);
+ pte_free_kernel(NULL, pte_table);
+ put_page(virt_to_page(pmd));
+}
+
+static bool pmd_empty(pmd_t *pmd)
+{
+ struct page *pmd_page = virt_to_page(pmd);
+ return page_count(pmd_page) == 1;
+}
+
+static void clear_pte_entry(pte_t *pte)
+{
+ if (pte_present(*pte)) {
+ kvm_set_pte(pte, __pte(0));
+ put_page(virt_to_page(pte));
+ }
+}
+
+static bool pte_empty(pte_t *pte)
+{
+ struct page *pte_page = virt_to_page(pte);
+ return page_count(pte_page) == 1;
+}
+
+/**
+ * unmap_stage2_range -- Clear stage2 page table entries to unmap a range
+ * @kvm: The VM pointer
+ * @start: The intermediate physical base address of the range to unmap
+ * @size: The size of the area to unmap
+ *
+ * Clear a range of stage-2 mappings, lowering the various ref-counts. Must
+ * be called while holding mmu_lock (unless for freeing the stage2 pgd before
+ * destroying the VM), otherwise another faulting VCPU may come in and mess
+ * with things behind our backs.
+ */
+static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ phys_addr_t addr = start, end = start + size;
+ u64 range;
+
+ while (addr < end) {
+ pgd = kvm->arch.pgd + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+ if (pud_none(*pud)) {
+ addr += PUD_SIZE;
+ continue;
+ }
+
+ pmd = pmd_offset(pud, addr);
+ if (pmd_none(*pmd)) {
+ addr += PMD_SIZE;
+ continue;
+ }
+
+ pte = pte_offset_kernel(pmd, addr);
+ clear_pte_entry(pte);
+ range = PAGE_SIZE;
+
+ /* If we emptied the pte, walk back up the ladder */
+ if (pte_empty(pte)) {
+ clear_pmd_entry(pmd);
+ range = PMD_SIZE;
+ if (pmd_empty(pmd)) {
+ clear_pud_entry(pud);
+ range = PUD_SIZE;
+ }
+ }
+
+ addr += range;
+ }
+}
+
+/**
+ * kvm_free_stage2_pgd - free all stage-2 tables
+ * @kvm: The KVM struct pointer for the VM.
+ *
+ * Walks the level-1 page table pointed to by kvm->arch.pgd and frees all
+ * underlying level-2 and level-3 tables before freeing the actual level-1 table
+ * and setting the struct pointer to NULL.
+ *
+ * Note we don't need locking here as this is only called when the VM is
+ * destroyed, which can only be done once.
+ */
+void kvm_free_stage2_pgd(struct kvm *kvm)
+{
+ if (kvm->arch.pgd == NULL)
+ return;
+
+ unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+ free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER);
+ kvm->arch.pgd = NULL;
+}
+
+
+static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
+ phys_addr_t addr, const pte_t *new_pte, bool iomap)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte, old_pte;
+
+ /* Create 2nd stage page table mapping - Level 1 */
+ pgd = kvm->arch.pgd + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+ if (pud_none(*pud)) {
+ if (!cache)
+ return 0; /* ignore calls from kvm_set_spte_hva */
+ pmd = mmu_memory_cache_alloc(cache);
+ pud_populate(NULL, pud, pmd);
+ pmd += pmd_index(addr);
+ get_page(virt_to_page(pud));
+ } else
+ pmd = pmd_offset(pud, addr);
+
+ /* Create 2nd stage page table mapping - Level 2 */
+ if (pmd_none(*pmd)) {
+ if (!cache)
+ return 0; /* ignore calls from kvm_set_spte_hva */
+ pte = mmu_memory_cache_alloc(cache);
+ clean_pte_table(pte);
+ pmd_populate_kernel(NULL, pmd, pte);
+ pte += pte_index(addr);
+ get_page(virt_to_page(pmd));
+ } else
+ pte = pte_offset_kernel(pmd, addr);
+
+ if (iomap && pte_present(*pte))
+ return -EFAULT;
+
+ /* Create 2nd stage page table mapping - Level 3 */
+ old_pte = *pte;
+ kvm_set_pte(pte, *new_pte);
+ if (pte_present(old_pte))
+ kvm_tlb_flush_vmid(kvm);
+ else
+ get_page(virt_to_page(pte));
+
+ return 0;
+}
+
+/**
+ * kvm_phys_addr_ioremap - map a device range to guest IPA
+ *
+ * @kvm: The KVM pointer
+ * @guest_ipa: The IPA at which to insert the mapping
+ * @pa: The physical address of the device
+ * @size: The size of the mapping
+ */
+int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
+ phys_addr_t pa, unsigned long size)
+{
+ phys_addr_t addr, end;
+ int ret = 0;
+ unsigned long pfn;
+ struct kvm_mmu_memory_cache cache = { 0, };
+
+ end = (guest_ipa + size + PAGE_SIZE - 1) & PAGE_MASK;
+ pfn = __phys_to_pfn(pa);
+
+ for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) {
+ pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE | L_PTE_S2_RDWR);
+
+ ret = mmu_topup_memory_cache(&cache, 2, 2);
+ if (ret)
+ goto out;
+ spin_lock(&kvm->mmu_lock);
+ ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
+ spin_unlock(&kvm->mmu_lock);
+ if (ret)
+ goto out;
+
+ pfn++;
+ }
+
+out:
+ mmu_free_memory_cache(&cache);
+ return ret;
+}
+
+static void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
+{
+ /*
+ * If we are going to insert an instruction page and the icache is
+ * either VIPT or PIPT, there is a potential problem where the host
+ * (or another VM) may have used the same page as this guest, and we
+ * read incorrect data from the icache. If we're using a PIPT cache,
+ * we can invalidate just that page, but if we are using a VIPT cache
+ * we need to invalidate the entire icache - damn shame - as written
+ * in the ARM ARM (DDI 0406C.b - Page B3-1393).
+ *
+ * VIVT caches are tagged using both the ASID and the VMID and doesn't
+ * need any kind of flushing (DDI 0406C.b - Page B3-1392).
+ */
+ if (icache_is_pipt()) {
+ unsigned long hva = gfn_to_hva(kvm, gfn);
+ __cpuc_coherent_user_range(hva, hva + PAGE_SIZE);
+ } else if (!icache_is_vivt_asid_tagged()) {
+ /* any kind of VIPT cache */
+ __flush_icache_all();
+ }
+}
+
+static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
+ gfn_t gfn, struct kvm_memory_slot *memslot,
+ unsigned long fault_status)
+{
+ pte_t new_pte;
+ pfn_t pfn;
+ int ret;
+ bool write_fault, writable;
+ unsigned long mmu_seq;
+ struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
+
+ write_fault = kvm_is_write_fault(vcpu->arch.hsr);
+ if (fault_status == FSC_PERM && !write_fault) {
+ kvm_err("Unexpected L2 read permission error\n");
+ return -EFAULT;
+ }
+
+ /* We need minimum second+third level pages */
+ ret = mmu_topup_memory_cache(memcache, 2, KVM_NR_MEM_OBJS);
+ if (ret)
+ return ret;
+
+ mmu_seq = vcpu->kvm->mmu_notifier_seq;
+ /*
+ * Ensure the read of mmu_notifier_seq happens before we call
+ * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
+ * the page we just got a reference to gets unmapped before we have a
+ * chance to grab the mmu_lock, which ensure that if the page gets
+ * unmapped afterwards, the call to kvm_unmap_hva will take it away
+ * from us again properly. This smp_rmb() interacts with the smp_wmb()
+ * in kvm_mmu_notifier_invalidate_<page|range_end>.
+ */
+ smp_rmb();
+
+ pfn = gfn_to_pfn_prot(vcpu->kvm, gfn, write_fault, &writable);
+ if (is_error_pfn(pfn))
+ return -EFAULT;
+
+ new_pte = pfn_pte(pfn, PAGE_S2);
+ coherent_icache_guest_page(vcpu->kvm, gfn);
+
+ spin_lock(&vcpu->kvm->mmu_lock);
+ if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
+ goto out_unlock;
+ if (writable) {
+ pte_val(new_pte) |= L_PTE_S2_RDWR;
+ kvm_set_pfn_dirty(pfn);
+ }
+ stage2_set_pte(vcpu->kvm, memcache, fault_ipa, &new_pte, false);
+
+out_unlock:
+ spin_unlock(&vcpu->kvm->mmu_lock);
+ kvm_release_pfn_clean(pfn);
+ return 0;
+}
+
+/**
+ * kvm_handle_guest_abort - handles all 2nd stage aborts
+ * @vcpu: the VCPU pointer
+ * @run: the kvm_run structure
+ *
+ * Any abort that gets to the host is almost guaranteed to be caused by a
+ * missing second stage translation table entry, which can mean that either the
+ * guest simply needs more memory and we must allocate an appropriate page or it
+ * can mean that the guest tried to access I/O memory, which is emulated by user
+ * space. The distinction is based on the IPA causing the fault and whether this
+ * memory region has been registered as standard RAM by user space.
+ */
+int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ unsigned long hsr_ec;
+ unsigned long fault_status;
+ phys_addr_t fault_ipa;
+ struct kvm_memory_slot *memslot;
+ bool is_iabt;
+ gfn_t gfn;
+ int ret, idx;
+
+ hsr_ec = vcpu->arch.hsr >> HSR_EC_SHIFT;
+ is_iabt = (hsr_ec == HSR_EC_IABT);
+ fault_ipa = ((phys_addr_t)vcpu->arch.hpfar & HPFAR_MASK) << 8;
+
+ trace_kvm_guest_fault(*vcpu_pc(vcpu), vcpu->arch.hsr,
+ vcpu->arch.hxfar, fault_ipa);
+
+ /* Check the stage-2 fault is trans. fault or write fault */
+ fault_status = (vcpu->arch.hsr & HSR_FSC_TYPE);
+ if (fault_status != FSC_FAULT && fault_status != FSC_PERM) {
+ kvm_err("Unsupported fault status: EC=%#lx DFCS=%#lx\n",
+ hsr_ec, fault_status);
+ return -EFAULT;
+ }
+
+ idx = srcu_read_lock(&vcpu->kvm->srcu);
+
+ gfn = fault_ipa >> PAGE_SHIFT;
+ if (!kvm_is_visible_gfn(vcpu->kvm, gfn)) {
+ if (is_iabt) {
+ /* Prefetch Abort on I/O address */
+ kvm_inject_pabt(vcpu, vcpu->arch.hxfar);
+ ret = 1;
+ goto out_unlock;
+ }
+
+ if (fault_status != FSC_FAULT) {
+ kvm_err("Unsupported fault status on io memory: %#lx\n",
+ fault_status);
+ ret = -EFAULT;
+ goto out_unlock;
+ }
+
+ /* Adjust page offset */
+ fault_ipa |= vcpu->arch.hxfar & ~PAGE_MASK;
+ ret = io_mem_abort(vcpu, run, fault_ipa);
+ goto out_unlock;
+ }
+
+ memslot = gfn_to_memslot(vcpu->kvm, gfn);
+ if (!memslot->user_alloc) {
+ kvm_err("non user-alloc memslots not supported\n");
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ ret = user_mem_abort(vcpu, fault_ipa, gfn, memslot, fault_status);
+ if (ret == 0)
+ ret = 1;
+out_unlock:
+ srcu_read_unlock(&vcpu->kvm->srcu, idx);
+ return ret;
+}
+
+static void handle_hva_to_gpa(struct kvm *kvm,
+ unsigned long start,
+ unsigned long end,
+ void (*handler)(struct kvm *kvm,
+ gpa_t gpa, void *data),
+ void *data)
+{
+ struct kvm_memslots *slots;
+ struct kvm_memory_slot *memslot;
+
+ slots = kvm_memslots(kvm);
+
+ /* we only care about the pages that the guest sees */
+ kvm_for_each_memslot(memslot, slots) {
+ unsigned long hva_start, hva_end;
+ gfn_t gfn, gfn_end;
+
+ hva_start = max(start, memslot->userspace_addr);
+ hva_end = min(end, memslot->userspace_addr +
+ (memslot->npages << PAGE_SHIFT));
+ if (hva_start >= hva_end)
+ continue;
+
+ /*
+ * {gfn(page) | page intersects with [hva_start, hva_end)} =
+ * {gfn_start, gfn_start+1, ..., gfn_end-1}.
+ */
+ gfn = hva_to_gfn_memslot(hva_start, memslot);
+ gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
+
+ for (; gfn < gfn_end; ++gfn) {
+ gpa_t gpa = gfn << PAGE_SHIFT;
+ handler(kvm, gpa, data);
+ }
+ }
+}
+
+static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
+{
+ unmap_stage2_range(kvm, gpa, PAGE_SIZE);
+ kvm_tlb_flush_vmid(kvm);
+}
+
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
+{
+ unsigned long end = hva + PAGE_SIZE;
+
+ if (!kvm->arch.pgd)
+ return 0;
+
+ trace_kvm_unmap_hva(hva);
+ handle_hva_to_gpa(kvm, hva, end, &kvm_unmap_hva_handler, NULL);
+ return 0;
+}
+
+int kvm_unmap_hva_range(struct kvm *kvm,
+ unsigned long start, unsigned long end)
+{
+ if (!kvm->arch.pgd)
+ return 0;
+
+ trace_kvm_unmap_hva_range(start, end);
+ handle_hva_to_gpa(kvm, start, end, &kvm_unmap_hva_handler, NULL);
+ return 0;
+}
+
+static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
+{
+ pte_t *pte = (pte_t *)data;
+
+ stage2_set_pte(kvm, NULL, gpa, pte, false);
+}
+
+
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
+{
+ unsigned long end = hva + PAGE_SIZE;
+ pte_t stage2_pte;
+
+ if (!kvm->arch.pgd)
+ return;
+
+ trace_kvm_set_spte_hva(hva);
+ stage2_pte = pfn_pte(pte_pfn(pte), PAGE_S2);
+ handle_hva_to_gpa(kvm, hva, end, &kvm_set_spte_handler, &stage2_pte);
+}
+
+void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu)
+{
+ mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
+}
+
+phys_addr_t kvm_mmu_get_httbr(void)
+{
+ VM_BUG_ON(!virt_addr_valid(hyp_pgd));
+ return virt_to_phys(hyp_pgd);
+}
+
+int kvm_mmu_init(void)
+{
+ if (!hyp_pgd) {
+ kvm_err("Hyp mode PGD not allocated\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * kvm_clear_idmap - remove all idmaps from the hyp pgd
+ *
+ * Free the underlying pmds for all pgds in range and clear the pgds (but
+ * don't free them) afterwards.
+ */
+void kvm_clear_hyp_idmap(void)
+{
+ unsigned long addr, end;
+ unsigned long next;
+ pgd_t *pgd = hyp_pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ addr = virt_to_phys(__hyp_idmap_text_start);
+ end = virt_to_phys(__hyp_idmap_text_end);
+
+ pgd += pgd_index(addr);
+ do {
+ next = pgd_addr_end(addr, end);
+ if (pgd_none_or_clear_bad(pgd))
+ continue;
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
+
+ pud_clear(pud);
+ clean_pmd_entry(pmd);
+ pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK));
+ } while (pgd++, addr = next, addr < end);
+}
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
new file mode 100644
index 0000000..7ee5bb7
--- /dev/null
+++ b/arch/arm/kvm/psci.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2012 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/wait.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_psci.h>
+
+/*
+ * This is an implementation of the Power State Coordination Interface
+ * as described in ARM document number ARM DEN 0022A.
+ */
+
+static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
+{
+ vcpu->arch.pause = true;
+}
+
+static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
+{
+ struct kvm *kvm = source_vcpu->kvm;
+ struct kvm_vcpu *vcpu;
+ wait_queue_head_t *wq;
+ unsigned long cpu_id;
+ phys_addr_t target_pc;
+
+ cpu_id = *vcpu_reg(source_vcpu, 1);
+ if (vcpu_mode_is_32bit(source_vcpu))
+ cpu_id &= ~((u32) 0);
+
+ if (cpu_id >= atomic_read(&kvm->online_vcpus))
+ return KVM_PSCI_RET_INVAL;
+
+ target_pc = *vcpu_reg(source_vcpu, 2);
+
+ vcpu = kvm_get_vcpu(kvm, cpu_id);
+
+ wq = kvm_arch_vcpu_wq(vcpu);
+ if (!waitqueue_active(wq))
+ return KVM_PSCI_RET_INVAL;
+
+ kvm_reset_vcpu(vcpu);
+
+ /* Gracefully handle Thumb2 entry point */
+ if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) {
+ target_pc &= ~((phys_addr_t) 1);
+ vcpu_set_thumb(vcpu);
+ }
+
+ *vcpu_pc(vcpu) = target_pc;
+ vcpu->arch.pause = false;
+ smp_mb(); /* Make sure the above is visible */
+
+ wake_up_interruptible(wq);
+
+ return KVM_PSCI_RET_SUCCESS;
+}
+
+/**
+ * kvm_psci_call - handle PSCI call if r0 value is in range
+ * @vcpu: Pointer to the VCPU struct
+ *
+ * Handle PSCI calls from guests through traps from HVC or SMC instructions.
+ * The calling convention is similar to SMC calls to the secure world where
+ * the function number is placed in r0 and this function returns true if the
+ * function number specified in r0 is withing the PSCI range, and false
+ * otherwise.
+ */
+bool kvm_psci_call(struct kvm_vcpu *vcpu)
+{
+ unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+ unsigned long val;
+
+ switch (psci_fn) {
+ case KVM_PSCI_FN_CPU_OFF:
+ kvm_psci_vcpu_off(vcpu);
+ val = KVM_PSCI_RET_SUCCESS;
+ break;
+ case KVM_PSCI_FN_CPU_ON:
+ val = kvm_psci_vcpu_on(vcpu);
+ break;
+ case KVM_PSCI_FN_CPU_SUSPEND:
+ case KVM_PSCI_FN_MIGRATE:
+ val = KVM_PSCI_RET_NI;
+ break;
+
+ default:
+ return false;
+ }
+
+ *vcpu_reg(vcpu, 0) = val;
+ return true;
+}
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
new file mode 100644
index 0000000..b80256b
--- /dev/null
+++ b/arch/arm/kvm/reset.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kvm_host.h>
+#include <linux/kvm.h>
+
+#include <asm/unified.h>
+#include <asm/ptrace.h>
+#include <asm/cputype.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_coproc.h>
+
+/******************************************************************************
+ * Cortex-A15 Reset Values
+ */
+
+static const int a15_max_cpu_idx = 3;
+
+static struct kvm_regs a15_regs_reset = {
+ .usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT,
+};
+
+
+/*******************************************************************************
+ * Exported reset function
+ */
+
+/**
+ * kvm_reset_vcpu - sets core registers and cp15 registers to reset value
+ * @vcpu: The VCPU pointer
+ *
+ * This function finds the right table above and sets the registers on the
+ * virtual CPU struct to their architectually defined reset values.
+ */
+int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
+{
+ struct kvm_regs *cpu_reset;
+
+ switch (vcpu->arch.target) {
+ case KVM_ARM_TARGET_CORTEX_A15:
+ if (vcpu->vcpu_id > a15_max_cpu_idx)
+ return -EINVAL;
+ cpu_reset = &a15_regs_reset;
+ vcpu->arch.midr = read_cpuid_id();
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /* Reset core registers */
+ memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+
+ /* Reset CP15 registers */
+ kvm_reset_coprocs(vcpu);
+
+ return 0;
+}
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
new file mode 100644
index 0000000..a8e73ed
--- /dev/null
+++ b/arch/arm/kvm/trace.h
@@ -0,0 +1,235 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+/*
+ * Tracepoints for entry/exit to guest
+ */
+TRACE_EVENT(kvm_entry,
+ TP_PROTO(unsigned long vcpu_pc),
+ TP_ARGS(vcpu_pc),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ ),
+
+ TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_exit,
+ TP_PROTO(unsigned long vcpu_pc),
+ TP_ARGS(vcpu_pc),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ ),
+
+ TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_guest_fault,
+ TP_PROTO(unsigned long vcpu_pc, unsigned long hsr,
+ unsigned long hxfar,
+ unsigned long long ipa),
+ TP_ARGS(vcpu_pc, hsr, hxfar, ipa),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ __field( unsigned long, hsr )
+ __field( unsigned long, hxfar )
+ __field( unsigned long long, ipa )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ __entry->hsr = hsr;
+ __entry->hxfar = hxfar;
+ __entry->ipa = ipa;
+ ),
+
+ TP_printk("guest fault at PC %#08lx (hxfar %#08lx, "
+ "ipa %#16llx, hsr %#08lx",
+ __entry->vcpu_pc, __entry->hxfar,
+ __entry->ipa, __entry->hsr)
+);
+
+TRACE_EVENT(kvm_irq_line,
+ TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level),
+ TP_ARGS(type, vcpu_idx, irq_num, level),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, type )
+ __field( int, vcpu_idx )
+ __field( int, irq_num )
+ __field( int, level )
+ ),
+
+ TP_fast_assign(
+ __entry->type = type;
+ __entry->vcpu_idx = vcpu_idx;
+ __entry->irq_num = irq_num;
+ __entry->level = level;
+ ),
+
+ TP_printk("Inject %s interrupt (%d), vcpu->idx: %d, num: %d, level: %d",
+ (__entry->type == KVM_ARM_IRQ_TYPE_CPU) ? "CPU" :
+ (__entry->type == KVM_ARM_IRQ_TYPE_PPI) ? "VGIC PPI" :
+ (__entry->type == KVM_ARM_IRQ_TYPE_SPI) ? "VGIC SPI" : "UNKNOWN",
+ __entry->type, __entry->vcpu_idx, __entry->irq_num, __entry->level)
+);
+
+TRACE_EVENT(kvm_mmio_emulate,
+ TP_PROTO(unsigned long vcpu_pc, unsigned long instr,
+ unsigned long cpsr),
+ TP_ARGS(vcpu_pc, instr, cpsr),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ __field( unsigned long, instr )
+ __field( unsigned long, cpsr )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ __entry->instr = instr;
+ __entry->cpsr = cpsr;
+ ),
+
+ TP_printk("Emulate MMIO at: 0x%08lx (instr: %08lx, cpsr: %08lx)",
+ __entry->vcpu_pc, __entry->instr, __entry->cpsr)
+);
+
+/* Architecturally implementation defined CP15 register access */
+TRACE_EVENT(kvm_emulate_cp15_imp,
+ TP_PROTO(unsigned long Op1, unsigned long Rt1, unsigned long CRn,
+ unsigned long CRm, unsigned long Op2, bool is_write),
+ TP_ARGS(Op1, Rt1, CRn, CRm, Op2, is_write),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, Op1 )
+ __field( unsigned int, Rt1 )
+ __field( unsigned int, CRn )
+ __field( unsigned int, CRm )
+ __field( unsigned int, Op2 )
+ __field( bool, is_write )
+ ),
+
+ TP_fast_assign(
+ __entry->is_write = is_write;
+ __entry->Op1 = Op1;
+ __entry->Rt1 = Rt1;
+ __entry->CRn = CRn;
+ __entry->CRm = CRm;
+ __entry->Op2 = Op2;
+ ),
+
+ TP_printk("Implementation defined CP15: %s\tp15, %u, r%u, c%u, c%u, %u",
+ (__entry->is_write) ? "mcr" : "mrc",
+ __entry->Op1, __entry->Rt1, __entry->CRn,
+ __entry->CRm, __entry->Op2)
+);
+
+TRACE_EVENT(kvm_wfi,
+ TP_PROTO(unsigned long vcpu_pc),
+ TP_ARGS(vcpu_pc),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ ),
+
+ TP_printk("guest executed wfi at: 0x%08lx", __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_unmap_hva,
+ TP_PROTO(unsigned long hva),
+ TP_ARGS(hva),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, hva )
+ ),
+
+ TP_fast_assign(
+ __entry->hva = hva;
+ ),
+
+ TP_printk("mmu notifier unmap hva: %#08lx", __entry->hva)
+);
+
+TRACE_EVENT(kvm_unmap_hva_range,
+ TP_PROTO(unsigned long start, unsigned long end),
+ TP_ARGS(start, end),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, start )
+ __field( unsigned long, end )
+ ),
+
+ TP_fast_assign(
+ __entry->start = start;
+ __entry->end = end;
+ ),
+
+ TP_printk("mmu notifier unmap range: %#08lx -- %#08lx",
+ __entry->start, __entry->end)
+);
+
+TRACE_EVENT(kvm_set_spte_hva,
+ TP_PROTO(unsigned long hva),
+ TP_ARGS(hva),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, hva )
+ ),
+
+ TP_fast_assign(
+ __entry->hva = hva;
+ ),
+
+ TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva)
+);
+
+TRACE_EVENT(kvm_hvc,
+ TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm),
+ TP_ARGS(vcpu_pc, r0, imm),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, vcpu_pc )
+ __field( unsigned long, r0 )
+ __field( unsigned long, imm )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_pc = vcpu_pc;
+ __entry->r0 = r0;
+ __entry->imm = imm;
+ ),
+
+ TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx",
+ __entry->vcpu_pc, __entry->r0, __entry->imm)
+);
+
+#endif /* _TRACE_KVM_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH arch/arm/kvm
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 9107691..5ac9e93 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -25,53 +25,9 @@
#define DAVINCI_CPUIDLE_MAX_STATES 2
-struct davinci_ops {
- void (*enter) (u32 flags);
- void (*exit) (u32 flags);
- u32 flags;
-};
-
-/* Actual code that puts the SoC in different idle states */
-static int davinci_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
-
- if (ops && ops->enter)
- ops->enter(ops->flags);
-
- index = cpuidle_wrap_enter(dev, drv, index,
- arm_cpuidle_simple_enter);
-
- if (ops && ops->exit)
- ops->exit(ops->flags);
-
- return index;
-}
-
-/* fields in davinci_ops.flags */
-#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0)
-
-static struct cpuidle_driver davinci_idle_driver = {
- .name = "cpuidle-davinci",
- .owner = THIS_MODULE,
- .en_core_tk_irqen = 1,
- .states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .enter = davinci_enter_idle,
- .exit_latency = 10,
- .target_residency = 100000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .name = "DDR SR",
- .desc = "WFI and DDR Self Refresh",
- },
- .state_count = DAVINCI_CPUIDLE_MAX_STATES,
-};
-
static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
static void __iomem *ddr2_reg_base;
+static bool ddr2_pdown;
static void davinci_save_ddr_power(int enter, bool pdown)
{
@@ -92,21 +48,35 @@
__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
}
-static void davinci_c2state_enter(u32 flags)
+/* Actual code that puts the SoC in different idle states */
+static int davinci_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
{
- davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+ davinci_save_ddr_power(1, ddr2_pdown);
+
+ index = cpuidle_wrap_enter(dev, drv, index,
+ arm_cpuidle_simple_enter);
+
+ davinci_save_ddr_power(0, ddr2_pdown);
+
+ return index;
}
-static void davinci_c2state_exit(u32 flags)
-{
- davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
-}
-
-static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
- [1] = {
- .enter = davinci_c2state_enter,
- .exit = davinci_c2state_exit,
+static struct cpuidle_driver davinci_idle_driver = {
+ .name = "cpuidle-davinci",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = davinci_enter_idle,
+ .exit_latency = 10,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "DDR SR",
+ .desc = "WFI and DDR Self Refresh",
},
+ .state_count = DAVINCI_CPUIDLE_MAX_STATES,
};
static int __init davinci_cpuidle_probe(struct platform_device *pdev)
@@ -124,11 +94,7 @@
ddr2_reg_base = pdata->ddr2_ctlr_base;
- if (pdata->ddr2_pdown)
- davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
- cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
-
- device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+ ddr2_pdown = pdata->ddr2_pdown;
ret = cpuidle_register_driver(&davinci_idle_driver);
if (ret) {
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h
index 7517c3f..b5d39dd 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/arch/arm/mach-exynos/include/mach/cpufreq.h
@@ -18,12 +18,25 @@
L20,
};
+#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
+ { \
+ .freq = (f) * 1000, \
+ .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
+ (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
+ .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
+ .mps = ((m) << 16 | (p) << 8 | (s)), \
+ }
+
+struct apll_freq {
+ unsigned int freq;
+ u32 clk_div_cpu0;
+ u32 clk_div_cpu1;
+ u32 mps;
+};
+
struct exynos_dvfs_info {
unsigned long mpll_freq_khz;
unsigned int pll_safe_idx;
- unsigned int pm_lock_idx;
- unsigned int max_support_idx;
- unsigned int min_support_idx;
struct clk *cpu_clk;
unsigned int *volt_table;
struct cpufreq_frequency_table *freq_table;
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 551c97e..44b12f9 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,7 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
@@ -11,5 +13,7 @@
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_SMP
+ select MAILBOX
+ select PL320_MBOX
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 80235b4..3f65206 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -2,7 +2,6 @@
#define __HIGHBANK_CORE_H
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
-extern void highbank_clocks_init(void);
extern void highbank_restart(char, const char *);
extern void __iomem *scu_base_addr;
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index e6c0612..65656ff 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -25,6 +25,7 @@
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/amba/bus.h>
+#include <linux/clk-provider.h>
#include <asm/arch_timer.h>
#include <asm/cacheflush.h>
@@ -117,7 +118,7 @@
WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
- highbank_clocks_init();
+ of_clk_init(NULL);
lookup.clk = of_clk_get(np, 0);
clkdev_add(&lookup);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7be3622..2d93d8b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -351,12 +351,10 @@
if (omap_irq_pending())
goto out;
- trace_power_start(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle(1, smp_processor_id());
omap_sram_idle();
- trace_power_end(smp_processor_id());
trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
out:
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3fdd008..8709a39 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -7,3 +7,4 @@
select PINCTRL
select SPARSE_IRQ
select SUNXI_TIMER
+ select PINCTRL_SUNXI
\ No newline at end of file
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index a74d3c7..a36a03d 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -243,8 +243,7 @@
/* FIXME: what's the actual transition time? */
policy->cpuinfo.transition_latency = 300 * 1000;
- policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
- cpumask_copy(policy->related_cpus, cpu_possible_mask);
+ cpumask_copy(policy->cpus, cpu_possible_mask);
if (policy->cpu == 0)
register_pm_notifier(&tegra_cpu_pm_notifier);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5dea906..3e5bbd0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@
select COMMON_CLK
select PINCTRL
select PINCTRL_NOMADIK
+ select PINCTRL_ABX500
select PL310_ERRATA_753970 if CACHE_PL310
config UX500_SOC_DB8500
@@ -18,6 +19,11 @@
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_DB8540
+ select PINCTRL_AB8500
+ select PINCTRL_AB8505
+ select PINCTRL_AB9540
+ select PINCTRL_AB8540
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522..b8781ca 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -90,26 +90,8 @@
},
};
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_PIN_GPIO(1),
- .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
- /* config_reg is the initial configuration of ab8500 pins.
- * The pins can be configured as GPIO or alt functions based
- * on value present in GpioSel1 to GpioSel6 and AlternatFunction
- * register. This is the array of 7 configuration settings.
- * One has to compile time decide these settings. Below is the
- * explanation of these setting
- * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
- * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
- * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
- * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
- * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
- * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
- * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
- * as GPIO then this register selectes the alternate fucntions
- */
- .config_reg = {0x00, 0x1E, 0x80, 0x01,
- 0x7A, 0x00, 0x00},
};
/* ab8500-codec */
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 5b286e0..b80ad96 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -285,7 +285,7 @@
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7d34c52..d526dd8 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -38,15 +38,7 @@
#define MOP500_STMPE1601_IRQ_END \
MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-/* AB8500 virtual gpio IRQ */
-#define AB8500_VIR_GPIO_NR_IRQS 16
-
-#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \
- MOP500_STMPE1601_IRQ_END
-#define MOP500_AB8500_VIR_GPIO_IRQ_END \
- (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
-
-#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END
#define MOP500_IRQ_END MOP500_NR_IRQS
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 5d59294..a78827b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -36,6 +36,7 @@
#include <linux/gfp.h>
#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
+#include <linux/bitops.h>
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
@@ -65,16 +66,28 @@
#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE)
#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE)
+/* These PIC IRQs are valid in each configuration */
+#define PIC_VALID_ALL BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \
+ BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \
+ BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \
+ BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \
+ BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \
+ BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \
+ BIT(SIC_INT_PCI3)
#if 1
#define IRQ_MMCI0A IRQ_VICSOURCE22
#define IRQ_AACI IRQ_VICSOURCE24
#define IRQ_ETH IRQ_VICSOURCE25
#define PIC_MASK 0xFFD00000
+#define PIC_VALID PIC_VALID_ALL
#else
#define IRQ_MMCI0A IRQ_SIC_MMCI0A
#define IRQ_AACI IRQ_SIC_AACI
#define IRQ_ETH IRQ_SIC_ETH
#define PIC_MASK 0
+#define PIC_VALID PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \
+ BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \
+ BIT(SIC_INT_ETH)
#endif
/* Lookup table for finding a DT node that represents the vic instance */
@@ -102,7 +115,7 @@
VERSATILE_SIC_BASE);
fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
- IRQ_VICSOURCE31, ~PIC_MASK, np);
+ IRQ_VICSOURCE31, PIC_VALID, np);
/*
* Interrupts on secondary controller from 0 to 8 are routed to
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 2f84f40..e92e5e0 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
@@ -327,12 +328,12 @@
int irq;
/* slot, pin, irq
- * 24 1 27
- * 25 1 28
- * 26 1 29
- * 27 1 30
+ * 24 1 IRQ_SIC_PCI0
+ * 25 1 IRQ_SIC_PCI1
+ * 26 1 IRQ_SIC_PCI2
+ * 27 1 IRQ_SIC_PCI3
*/
- irq = 27 + ((slot - 24 + pin - 1) & 3);
+ irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
return irq;
}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3fd629d..025d173 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -629,8 +629,9 @@
make use of it. Say N for code that can run on CPUs without ThumbEE.
config ARM_VIRT_EXT
- bool "Native support for the ARM Virtualization Extensions"
- depends on MMU && CPU_V7
+ bool
+ depends on MMU
+ default y if CPU_V7
help
Enable the kernel to make use of the ARM Virtualization
Extensions to install hypervisors without run-time firmware
@@ -640,11 +641,6 @@
use of this feature. Refer to Documentation/arm/Booting for
details.
- It is safe to enable this option even if the kernel may not be
- booted in HYP mode, may not have support for the
- virtualization extensions, or may be booted with a
- non-compliant bootloader.
-
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
depends on !CPU_USE_DOMAINS && CPU_V7
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 8a9c4cb..4e333fa 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \
- mmap.o pgd.o mmu.o vmregion.o
+ mmap.o pgd.o mmu.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index bc4a5e9..7a05111 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -34,6 +34,9 @@
* The ASID is used to tag entries in the CPU caches and TLBs.
* The context ID is used by debuggers and trace logic, and
* should be unique within all running processes.
+ *
+ * In big endian operation, the two 32 bit words are swapped if accesed by
+ * non 64-bit operations.
*/
#define ASID_FIRST_VERSION (1ULL << ASID_BITS)
#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1)
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 99db769..2dffc01 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -1,4 +1,6 @@
+#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/cputype.h>
#include <asm/idmap.h>
@@ -6,6 +8,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <asm/system_info.h>
+#include <asm/virt.h>
pgd_t *idmap_pgd;
@@ -59,11 +62,17 @@
} while (pud++, addr = next, addr != end);
}
-static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+static void identity_mapping_add(pgd_t *pgd, const char *text_start,
+ const char *text_end, unsigned long prot)
{
- unsigned long prot, next;
+ unsigned long addr, end;
+ unsigned long next;
- prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
+ addr = virt_to_phys(text_start);
+ end = virt_to_phys(text_end);
+
+ prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
+
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
prot |= PMD_BIT4;
@@ -74,28 +83,52 @@
} while (pgd++, addr = next, addr != end);
}
+#if defined(CONFIG_ARM_VIRT_EXT) && defined(CONFIG_ARM_LPAE)
+pgd_t *hyp_pgd;
+
+extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
+
+static int __init init_static_idmap_hyp(void)
+{
+ hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
+ if (!hyp_pgd)
+ return -ENOMEM;
+
+ pr_info("Setting up static HYP identity map for 0x%p - 0x%p\n",
+ __hyp_idmap_text_start, __hyp_idmap_text_end);
+ identity_mapping_add(hyp_pgd, __hyp_idmap_text_start,
+ __hyp_idmap_text_end, PMD_SECT_AP1);
+
+ return 0;
+}
+#else
+static int __init init_static_idmap_hyp(void)
+{
+ return 0;
+}
+#endif
+
extern char __idmap_text_start[], __idmap_text_end[];
static int __init init_static_idmap(void)
{
- phys_addr_t idmap_start, idmap_end;
+ int ret;
idmap_pgd = pgd_alloc(&init_mm);
if (!idmap_pgd)
return -ENOMEM;
- /* Add an identity mapping for the physical address of the section. */
- idmap_start = virt_to_phys((void *)__idmap_text_start);
- idmap_end = virt_to_phys((void *)__idmap_text_end);
+ pr_info("Setting up static identity map for 0x%p - 0x%p\n",
+ __idmap_text_start, __idmap_text_end);
+ identity_mapping_add(idmap_pgd, __idmap_text_start,
+ __idmap_text_end, 0);
- pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
- (long long)idmap_start, (long long)idmap_end);
- identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
+ ret = init_static_idmap_hyp();
/* Flush L1 for the hardware to see this page table content */
flush_cache_louis();
- return 0;
+ return ret;
}
early_initcall(init_static_idmap);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 88fd86c..04d9006 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -39,6 +39,70 @@
#include <asm/mach/pci.h>
#include "mm.h"
+
+LIST_HEAD(static_vmlist);
+
+static struct static_vm *find_static_vm_paddr(phys_addr_t paddr,
+ size_t size, unsigned int mtype)
+{
+ struct static_vm *svm;
+ struct vm_struct *vm;
+
+ list_for_each_entry(svm, &static_vmlist, list) {
+ vm = &svm->vm;
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ if ((vm->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
+ continue;
+
+ if (vm->phys_addr > paddr ||
+ paddr + size - 1 > vm->phys_addr + vm->size - 1)
+ continue;
+
+ return svm;
+ }
+
+ return NULL;
+}
+
+struct static_vm *find_static_vm_vaddr(void *vaddr)
+{
+ struct static_vm *svm;
+ struct vm_struct *vm;
+
+ list_for_each_entry(svm, &static_vmlist, list) {
+ vm = &svm->vm;
+
+ /* static_vmlist is ascending order */
+ if (vm->addr > vaddr)
+ break;
+
+ if (vm->addr <= vaddr && vm->addr + vm->size > vaddr)
+ return svm;
+ }
+
+ return NULL;
+}
+
+void __init add_static_vm_early(struct static_vm *svm)
+{
+ struct static_vm *curr_svm;
+ struct vm_struct *vm;
+ void *vaddr;
+
+ vm = &svm->vm;
+ vm_area_add_early(vm);
+ vaddr = vm->addr;
+
+ list_for_each_entry(curr_svm, &static_vmlist, list) {
+ vm = &curr_svm->vm;
+
+ if (vm->addr > vaddr)
+ break;
+ }
+ list_add_tail(&svm->list, &curr_svm->list);
+}
+
int ioremap_page(unsigned long virt, unsigned long phys,
const struct mem_type *mtype)
{
@@ -197,13 +261,14 @@
const struct mem_type *type;
int err;
unsigned long addr;
- struct vm_struct * area;
+ struct vm_struct *area;
+ phys_addr_t paddr = __pfn_to_phys(pfn);
#ifndef CONFIG_ARM_LPAE
/*
* High mappings must be supersection aligned
*/
- if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
+ if (pfn >= 0x100000 && (paddr & ~SUPERSECTION_MASK))
return NULL;
#endif
@@ -219,24 +284,16 @@
/*
* Try to reuse one of the static mapping whenever possible.
*/
- read_lock(&vmlist_lock);
- for (area = vmlist; area; area = area->next) {
- if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
- break;
- if (!(area->flags & VM_ARM_STATIC_MAPPING))
- continue;
- if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
- continue;
- if (__phys_to_pfn(area->phys_addr) > pfn ||
- __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
- continue;
- /* we can drop the lock here as we know *area is static */
- read_unlock(&vmlist_lock);
- addr = (unsigned long)area->addr;
- addr += __pfn_to_phys(pfn) - area->phys_addr;
- return (void __iomem *) (offset + addr);
+ if (size && !(sizeof(phys_addr_t) == 4 && pfn >= 0x100000)) {
+ struct static_vm *svm;
+
+ svm = find_static_vm_paddr(paddr, size, mtype);
+ if (svm) {
+ addr = (unsigned long)svm->vm.addr;
+ addr += paddr - svm->vm.phys_addr;
+ return (void __iomem *) (offset + addr);
+ }
}
- read_unlock(&vmlist_lock);
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
@@ -248,21 +305,21 @@
if (!area)
return NULL;
addr = (unsigned long)area->addr;
- area->phys_addr = __pfn_to_phys(pfn);
+ area->phys_addr = paddr;
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
if (DOMAIN_IO == 0 &&
(((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) && pfn >= 0x100000 &&
- !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
+ !((paddr | size | addr) & ~SUPERSECTION_MASK)) {
area->flags |= VM_ARM_SECTION_MAPPING;
err = remap_area_supersections(addr, pfn, size, type);
- } else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+ } else if (!((paddr | size | addr) & ~PMD_MASK)) {
area->flags |= VM_ARM_SECTION_MAPPING;
err = remap_area_sections(addr, pfn, size, type);
} else
#endif
- err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+ err = ioremap_page_range(addr, addr + size, paddr,
__pgprot(type->prot_pte));
if (err) {
@@ -346,34 +403,28 @@
void __iounmap(volatile void __iomem *io_addr)
{
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
- struct vm_struct *vm;
+ struct static_vm *svm;
- read_lock(&vmlist_lock);
- for (vm = vmlist; vm; vm = vm->next) {
- if (vm->addr > addr)
- break;
- if (!(vm->flags & VM_IOREMAP))
- continue;
- /* If this is a static mapping we must leave it alone */
- if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
- (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
- read_unlock(&vmlist_lock);
- return;
- }
+ /* If this is a static mapping, we must leave it alone */
+ svm = find_static_vm_vaddr(addr);
+ if (svm)
+ return;
+
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
+ {
+ struct vm_struct *vm;
+
+ vm = find_vm_area(addr);
+
/*
* If this is a section based mapping we need to handle it
* specially as the VM subsystem does not know how to handle
* such a beast.
*/
- if ((vm->addr == addr) &&
- (vm->flags & VM_ARM_SECTION_MAPPING)) {
+ if (vm && (vm->flags & VM_ARM_SECTION_MAPPING))
unmap_area_sections((unsigned long)vm->addr, vm->size);
- break;
- }
-#endif
}
- read_unlock(&vmlist_lock);
+#endif
vunmap(addr);
}
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index a8ee92d..d5a4e9a 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -1,4 +1,6 @@
#ifdef CONFIG_MMU
+#include <linux/list.h>
+#include <linux/vmalloc.h>
/* the upper-most page table pointer */
extern pmd_t *top_pmd;
@@ -65,6 +67,16 @@
/* consistent regions used by dma_alloc_attrs() */
#define VM_ARM_DMA_CONSISTENT 0x20000000
+
+struct static_vm {
+ struct vm_struct vm;
+ struct list_head list;
+};
+
+extern struct list_head static_vmlist;
+extern struct static_vm *find_static_vm_vaddr(void *vaddr);
+extern __init void add_static_vm_early(struct static_vm *svm);
+
#endif
#ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ce328c7..e95a996 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -57,6 +57,9 @@
static unsigned int ecc_mask __initdata = 0;
pgprot_t pgprot_user;
pgprot_t pgprot_kernel;
+pgprot_t pgprot_hyp_device;
+pgprot_t pgprot_s2;
+pgprot_t pgprot_s2_device;
EXPORT_SYMBOL(pgprot_user);
EXPORT_SYMBOL(pgprot_kernel);
@@ -66,34 +69,46 @@
unsigned int cr_mask;
pmdval_t pmd;
pteval_t pte;
+ pteval_t pte_s2;
};
+#ifdef CONFIG_ARM_LPAE
+#define s2_policy(policy) policy
+#else
+#define s2_policy(policy) 0
+#endif
+
static struct cachepolicy cache_policies[] __initdata = {
{
.policy = "uncached",
.cr_mask = CR_W|CR_C,
.pmd = PMD_SECT_UNCACHED,
.pte = L_PTE_MT_UNCACHED,
+ .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED),
}, {
.policy = "buffered",
.cr_mask = CR_C,
.pmd = PMD_SECT_BUFFERED,
.pte = L_PTE_MT_BUFFERABLE,
+ .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED),
}, {
.policy = "writethrough",
.cr_mask = 0,
.pmd = PMD_SECT_WT,
.pte = L_PTE_MT_WRITETHROUGH,
+ .pte_s2 = s2_policy(L_PTE_S2_MT_WRITETHROUGH),
}, {
.policy = "writeback",
.cr_mask = 0,
.pmd = PMD_SECT_WB,
.pte = L_PTE_MT_WRITEBACK,
+ .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK),
}, {
.policy = "writealloc",
.cr_mask = 0,
.pmd = PMD_SECT_WBWA,
.pte = L_PTE_MT_WRITEALLOC,
+ .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK),
}
};
@@ -310,6 +325,7 @@
struct cachepolicy *cp;
unsigned int cr = get_cr();
pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
+ pteval_t hyp_device_pgprot, s2_pgprot, s2_device_pgprot;
int cpu_arch = cpu_architecture();
int i;
@@ -421,6 +437,8 @@
*/
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
+ s2_pgprot = cp->pte_s2;
+ hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
/*
* ARMv6 and above have extended page tables.
@@ -444,6 +462,7 @@
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
+ s2_pgprot |= L_PTE_SHARED;
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
@@ -498,6 +517,9 @@
pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
L_PTE_DIRTY | kern_pgprot);
+ pgprot_s2 = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | s2_pgprot);
+ pgprot_s2_device = __pgprot(s2_device_pgprot);
+ pgprot_hyp_device = __pgprot(hyp_device_pgprot);
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
@@ -757,21 +779,24 @@
{
struct map_desc *md;
struct vm_struct *vm;
+ struct static_vm *svm;
if (!nr)
return;
- vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
+ svm = early_alloc_aligned(sizeof(*svm) * nr, __alignof__(*svm));
for (md = io_desc; nr; md++, nr--) {
create_mapping(md);
+
+ vm = &svm->vm;
vm->addr = (void *)(md->virtual & PAGE_MASK);
vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
vm->phys_addr = __pfn_to_phys(md->pfn);
vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
vm->flags |= VM_ARM_MTYPE(md->type);
vm->caller = iotable_init;
- vm_area_add_early(vm++);
+ add_static_vm_early(svm++);
}
}
@@ -779,13 +804,16 @@
void *caller)
{
struct vm_struct *vm;
+ struct static_vm *svm;
- vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ svm = early_alloc_aligned(sizeof(*svm), __alignof__(*svm));
+
+ vm = &svm->vm;
vm->addr = (void *)addr;
vm->size = size;
vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
vm->caller = caller;
- vm_area_add_early(vm);
+ add_static_vm_early(svm);
}
#ifndef CONFIG_ARM_LPAE
@@ -810,14 +838,13 @@
static void __init fill_pmd_gaps(void)
{
+ struct static_vm *svm;
struct vm_struct *vm;
unsigned long addr, next = 0;
pmd_t *pmd;
- /* we're still single threaded hence no lock needed here */
- for (vm = vmlist; vm; vm = vm->next) {
- if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
- continue;
+ list_for_each_entry(svm, &static_vmlist, list) {
+ vm = &svm->vm;
addr = (unsigned long)vm->addr;
if (addr < next)
continue;
@@ -857,19 +884,12 @@
#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
static void __init pci_reserve_io(void)
{
- struct vm_struct *vm;
- unsigned long addr;
+ struct static_vm *svm;
- /* we're still single threaded hence no lock needed here */
- for (vm = vmlist; vm; vm = vm->next) {
- if (!(vm->flags & VM_ARM_STATIC_MAPPING))
- continue;
- addr = (unsigned long)vm->addr;
- addr &= ~(SZ_2M - 1);
- if (addr == PCI_IO_VIRT_BASE)
- return;
+ svm = find_static_vm_vaddr((void *)PCI_IO_VIRT_BASE);
+ if (svm)
+ return;
- }
vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
}
#else
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index eb6aa73..f9a0aa7 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -38,9 +38,14 @@
/*
* mmid - get context id from mm pointer (mm->context.id)
+ * note, this field is 64bit, so in big-endian the two words are swapped too.
*/
.macro mmid, rd, rn
+#ifdef __ARMEB__
+ ldr \rd, [\rn, #MM_CONTEXT_ID + 4 ]
+#else
ldr \rd, [\rn, #MM_CONTEXT_ID]
+#endif
.endm
/*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 09c5233..bcaaa8d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -101,7 +101,7 @@
ENTRY(cpu_v6_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ mmid r1, r1 @ get mm->context.id
ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 6d98c13..78f520b 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -40,7 +40,7 @@
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ mmid r1, r1 @ get mm->context.id
ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
#ifdef CONFIG_ARM_ERRATA_430973
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 7b56386..50bf1da 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -47,7 +47,7 @@
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ mmid r1, r1 @ get mm->context.id
and r3, r1, #0xff
mov r3, r3, lsl #(48 - 32) @ ASID
mcrr p15, 0, r0, r3, c2 @ set TTB 0
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
deleted file mode 100644
index a631016..0000000
--- a/arch/arm/mm/vmregion.c
+++ /dev/null
@@ -1,205 +0,0 @@
-#include <linux/fs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-
-#include "vmregion.h"
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- * struct vm_struct {
- * struct vmregion region;
- * unsigned long flags;
- * struct page **pages;
- * unsigned int nr_pages;
- * unsigned long phys_addr;
- * };
- *
- * get_vm_area() would then call vmregion_alloc with an appropriate
- * struct vmregion head (eg):
- *
- * struct vmregion vmalloc_head = {
- * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
- * .vm_start = VMALLOC_START,
- * .vm_end = VMALLOC_END,
- * };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.) I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vmregion_alloc().
- */
-
-struct arm_vmregion *
-arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
- size_t size, gfp_t gfp, const void *caller)
-{
- unsigned long start = head->vm_start, addr = head->vm_end;
- unsigned long flags;
- struct arm_vmregion *c, *new;
-
- if (head->vm_end - head->vm_start < size) {
- printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
- __func__, size);
- goto out;
- }
-
- new = kmalloc(sizeof(struct arm_vmregion), gfp);
- if (!new)
- goto out;
-
- new->caller = caller;
-
- spin_lock_irqsave(&head->vm_lock, flags);
-
- addr = rounddown(addr - size, align);
- list_for_each_entry_reverse(c, &head->vm_list, vm_list) {
- if (addr >= c->vm_end)
- goto found;
- addr = rounddown(c->vm_start - size, align);
- if (addr < start)
- goto nospc;
- }
-
- found:
- /*
- * Insert this entry after the one we found.
- */
- list_add(&new->vm_list, &c->vm_list);
- new->vm_start = addr;
- new->vm_end = addr + size;
- new->vm_active = 1;
-
- spin_unlock_irqrestore(&head->vm_lock, flags);
- return new;
-
- nospc:
- spin_unlock_irqrestore(&head->vm_lock, flags);
- kfree(new);
- out:
- return NULL;
-}
-
-static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
-{
- struct arm_vmregion *c;
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_active && c->vm_start == addr)
- goto out;
- }
- c = NULL;
- out:
- return c;
-}
-
-struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
-{
- struct arm_vmregion *c;
- unsigned long flags;
-
- spin_lock_irqsave(&head->vm_lock, flags);
- c = __arm_vmregion_find(head, addr);
- spin_unlock_irqrestore(&head->vm_lock, flags);
- return c;
-}
-
-struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
-{
- struct arm_vmregion *c;
- unsigned long flags;
-
- spin_lock_irqsave(&head->vm_lock, flags);
- c = __arm_vmregion_find(head, addr);
- if (c)
- c->vm_active = 0;
- spin_unlock_irqrestore(&head->vm_lock, flags);
- return c;
-}
-
-void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&head->vm_lock, flags);
- list_del(&c->vm_list);
- spin_unlock_irqrestore(&head->vm_lock, flags);
-
- kfree(c);
-}
-
-#ifdef CONFIG_PROC_FS
-static int arm_vmregion_show(struct seq_file *m, void *p)
-{
- struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list);
-
- seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end,
- c->vm_end - c->vm_start);
- if (c->caller)
- seq_printf(m, " %pS", (void *)c->caller);
- seq_putc(m, '\n');
- return 0;
-}
-
-static void *arm_vmregion_start(struct seq_file *m, loff_t *pos)
-{
- struct arm_vmregion_head *h = m->private;
- spin_lock_irq(&h->vm_lock);
- return seq_list_start(&h->vm_list, *pos);
-}
-
-static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos)
-{
- struct arm_vmregion_head *h = m->private;
- return seq_list_next(p, &h->vm_list, pos);
-}
-
-static void arm_vmregion_stop(struct seq_file *m, void *p)
-{
- struct arm_vmregion_head *h = m->private;
- spin_unlock_irq(&h->vm_lock);
-}
-
-static const struct seq_operations arm_vmregion_ops = {
- .start = arm_vmregion_start,
- .stop = arm_vmregion_stop,
- .next = arm_vmregion_next,
- .show = arm_vmregion_show,
-};
-
-static int arm_vmregion_open(struct inode *inode, struct file *file)
-{
- struct arm_vmregion_head *h = PDE(inode)->data;
- int ret = seq_open(file, &arm_vmregion_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = h;
- }
- return ret;
-}
-
-static const struct file_operations arm_vmregion_fops = {
- .open = arm_vmregion_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
-{
- proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h);
- return 0;
-}
-#else
-int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
-{
- return 0;
-}
-#endif
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
deleted file mode 100644
index 0f5a5f2..0000000
--- a/arch/arm/mm/vmregion.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef VMREGION_H
-#define VMREGION_H
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-struct page;
-
-struct arm_vmregion_head {
- spinlock_t vm_lock;
- struct list_head vm_list;
- unsigned long vm_start;
- unsigned long vm_end;
-};
-
-struct arm_vmregion {
- struct list_head vm_list;
- unsigned long vm_start;
- unsigned long vm_end;
- int vm_active;
- const void *caller;
-};
-
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *);
-struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
-struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
-void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
-
-int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *);
-
-#endif
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f8f362a..7c43569 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2,6 +2,7 @@
def_bool y
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
+ select ARCH_WANT_FRAME_POINTERS
select ARM_AMBA
select CLONE_BACKWARDS
select COMMON_CLK
@@ -21,7 +22,6 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if PERF_EVENTS
- select HAVE_IRQ_WORK
select HAVE_MEMBLOCK
select HAVE_PERF_EVENTS
select IRQ_DOMAIN
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index d7553f2..5149343 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -24,4 +24,21 @@
Enables the display of the minimum amount of free stack which each
task has ever had available in the sysrq-T output.
+config EARLY_PRINTK
+ bool "Early printk support"
+ default y
+ help
+ Say Y here if you want to have an early console using the
+ earlyprintk=<name>[,<addr>][,<options>] kernel parameter. It
+ is assumed that the early console device has been initialised
+ by the boot loader prior to starting the Linux kernel.
+
+config PID_IN_CONTEXTIDR
+ bool "Write the current PID to the CONTEXTIDR register"
+ help
+ Enabling this option causes the kernel to write the current PID to
+ the CONTEXTIDR register, at the expense of some additional
+ instructions during context switch. Say Y here only if you are
+ planning to use hardware trace tools with this kernel.
+
endmenu
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 14a9d5a..e5fe4f9 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -19,6 +19,7 @@
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
+generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mman.h
@@ -48,3 +49,4 @@
generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
+generic-y += xor.h
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h
index 407717b..8363644 100644
--- a/arch/arm64/include/asm/atomic.h
+++ b/arch/arm64/include/asm/atomic.h
@@ -49,12 +49,12 @@
int result;
asm volatile("// atomic_add\n"
-"1: ldxr %w0, [%3]\n"
-" add %w0, %w0, %w4\n"
-" stxr %w1, %w0, [%3]\n"
+"1: ldxr %w0, %2\n"
+" add %w0, %w0, %w3\n"
+" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
: "cc");
}
@@ -64,13 +64,13 @@
int result;
asm volatile("// atomic_add_return\n"
-"1: ldaxr %w0, [%3]\n"
-" add %w0, %w0, %w4\n"
-" stlxr %w1, %w0, [%3]\n"
+"1: ldaxr %w0, %2\n"
+" add %w0, %w0, %w3\n"
+" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
- : "cc");
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
+ : "cc", "memory");
return result;
}
@@ -81,12 +81,12 @@
int result;
asm volatile("// atomic_sub\n"
-"1: ldxr %w0, [%3]\n"
-" sub %w0, %w0, %w4\n"
-" stxr %w1, %w0, [%3]\n"
+"1: ldxr %w0, %2\n"
+" sub %w0, %w0, %w3\n"
+" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
: "cc");
}
@@ -96,13 +96,13 @@
int result;
asm volatile("// atomic_sub_return\n"
-"1: ldaxr %w0, [%3]\n"
-" sub %w0, %w0, %w4\n"
-" stlxr %w1, %w0, [%3]\n"
+"1: ldaxr %w0, %2\n"
+" sub %w0, %w0, %w3\n"
+" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
- : "cc");
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
+ : "cc", "memory");
return result;
}
@@ -113,15 +113,15 @@
int oldval;
asm volatile("// atomic_cmpxchg\n"
-"1: ldaxr %w1, [%3]\n"
-" cmp %w1, %w4\n"
+"1: ldaxr %w1, %2\n"
+" cmp %w1, %w3\n"
" b.ne 2f\n"
-" stlxr %w0, %w5, [%3]\n"
+" stlxr %w0, %w4, %2\n"
" cbnz %w0, 1b\n"
"2:"
- : "=&r" (tmp), "=&r" (oldval), "+o" (ptr->counter)
- : "r" (&ptr->counter), "Ir" (old), "r" (new)
- : "cc");
+ : "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
+ : "Ir" (old), "r" (new)
+ : "cc", "memory");
return oldval;
}
@@ -131,12 +131,12 @@
unsigned long tmp, tmp2;
asm volatile("// atomic_clear_mask\n"
-"1: ldxr %0, [%3]\n"
-" bic %0, %0, %4\n"
-" stxr %w1, %0, [%3]\n"
+"1: ldxr %0, %2\n"
+" bic %0, %0, %3\n"
+" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (tmp), "=&r" (tmp2), "+o" (*addr)
- : "r" (addr), "Ir" (mask)
+ : "=&r" (tmp), "=&r" (tmp2), "+Q" (*addr)
+ : "Ir" (mask)
: "cc");
}
@@ -182,12 +182,12 @@
unsigned long tmp;
asm volatile("// atomic64_add\n"
-"1: ldxr %0, [%3]\n"
-" add %0, %0, %4\n"
-" stxr %w1, %0, [%3]\n"
+"1: ldxr %0, %2\n"
+" add %0, %0, %3\n"
+" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
: "cc");
}
@@ -197,13 +197,13 @@
unsigned long tmp;
asm volatile("// atomic64_add_return\n"
-"1: ldaxr %0, [%3]\n"
-" add %0, %0, %4\n"
-" stlxr %w1, %0, [%3]\n"
+"1: ldaxr %0, %2\n"
+" add %0, %0, %3\n"
+" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
- : "cc");
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
+ : "cc", "memory");
return result;
}
@@ -214,12 +214,12 @@
unsigned long tmp;
asm volatile("// atomic64_sub\n"
-"1: ldxr %0, [%3]\n"
-" sub %0, %0, %4\n"
-" stxr %w1, %0, [%3]\n"
+"1: ldxr %0, %2\n"
+" sub %0, %0, %3\n"
+" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
: "cc");
}
@@ -229,13 +229,13 @@
unsigned long tmp;
asm volatile("// atomic64_sub_return\n"
-"1: ldaxr %0, [%3]\n"
-" sub %0, %0, %4\n"
-" stlxr %w1, %0, [%3]\n"
+"1: ldaxr %0, %2\n"
+" sub %0, %0, %3\n"
+" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter), "Ir" (i)
- : "cc");
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ : "Ir" (i)
+ : "cc", "memory");
return result;
}
@@ -246,15 +246,15 @@
unsigned long res;
asm volatile("// atomic64_cmpxchg\n"
-"1: ldaxr %1, [%3]\n"
-" cmp %1, %4\n"
+"1: ldaxr %1, %2\n"
+" cmp %1, %3\n"
" b.ne 2f\n"
-" stlxr %w0, %5, [%3]\n"
+" stlxr %w0, %4, %2\n"
" cbnz %w0, 1b\n"
"2:"
- : "=&r" (res), "=&r" (oldval), "+o" (ptr->counter)
- : "r" (&ptr->counter), "Ir" (old), "r" (new)
- : "cc");
+ : "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter)
+ : "Ir" (old), "r" (new)
+ : "cc", "memory");
return oldval;
}
@@ -267,15 +267,15 @@
unsigned long tmp;
asm volatile("// atomic64_dec_if_positive\n"
-"1: ldaxr %0, [%3]\n"
+"1: ldaxr %0, %2\n"
" subs %0, %0, #1\n"
" b.mi 2f\n"
-" stlxr %w1, %0, [%3]\n"
+" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
"2:"
- : "=&r" (result), "=&r" (tmp), "+o" (v->counter)
- : "r" (&v->counter)
- : "cc");
+ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+ :
+ : "cc", "memory");
return result;
}
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index e0e65b0..968b5cb 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -29,39 +29,39 @@
switch (size) {
case 1:
asm volatile("// __xchg1\n"
- "1: ldaxrb %w0, [%3]\n"
- " stlxrb %w1, %w2, [%3]\n"
+ "1: ldaxrb %w0, %2\n"
+ " stlxrb %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
- : "=&r" (ret), "=&r" (tmp)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
+ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
+ : "r" (x)
+ : "cc", "memory");
break;
case 2:
asm volatile("// __xchg2\n"
- "1: ldaxrh %w0, [%3]\n"
- " stlxrh %w1, %w2, [%3]\n"
+ "1: ldaxrh %w0, %2\n"
+ " stlxrh %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
- : "=&r" (ret), "=&r" (tmp)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
+ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
+ : "r" (x)
+ : "cc", "memory");
break;
case 4:
asm volatile("// __xchg4\n"
- "1: ldaxr %w0, [%3]\n"
- " stlxr %w1, %w2, [%3]\n"
+ "1: ldaxr %w0, %2\n"
+ " stlxr %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
- : "=&r" (ret), "=&r" (tmp)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
+ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
+ : "r" (x)
+ : "cc", "memory");
break;
case 8:
asm volatile("// __xchg8\n"
- "1: ldaxr %0, [%3]\n"
- " stlxr %w1, %2, [%3]\n"
+ "1: ldaxr %0, %2\n"
+ " stlxr %w1, %3, %2\n"
" cbnz %w1, 1b\n"
- : "=&r" (ret), "=&r" (tmp)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
+ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
+ : "r" (x)
+ : "cc", "memory");
break;
default:
BUILD_BUG();
@@ -82,14 +82,14 @@
case 1:
do {
asm volatile("// __cmpxchg1\n"
- " ldxrb %w1, [%2]\n"
+ " ldxrb %w1, %2\n"
" mov %w0, #0\n"
" cmp %w1, %w3\n"
" b.ne 1f\n"
- " stxrb %w0, %w4, [%2]\n"
+ " stxrb %w0, %w4, %2\n"
"1:\n"
- : "=&r" (res), "=&r" (oldval)
- : "r" (ptr), "Ir" (old), "r" (new)
+ : "=&r" (res), "=&r" (oldval), "+Q" (*(u8 *)ptr)
+ : "Ir" (old), "r" (new)
: "cc");
} while (res);
break;
@@ -97,29 +97,29 @@
case 2:
do {
asm volatile("// __cmpxchg2\n"
- " ldxrh %w1, [%2]\n"
+ " ldxrh %w1, %2\n"
" mov %w0, #0\n"
" cmp %w1, %w3\n"
" b.ne 1f\n"
- " stxrh %w0, %w4, [%2]\n"
+ " stxrh %w0, %w4, %2\n"
"1:\n"
- : "=&r" (res), "=&r" (oldval)
- : "r" (ptr), "Ir" (old), "r" (new)
- : "memory", "cc");
+ : "=&r" (res), "=&r" (oldval), "+Q" (*(u16 *)ptr)
+ : "Ir" (old), "r" (new)
+ : "cc");
} while (res);
break;
case 4:
do {
asm volatile("// __cmpxchg4\n"
- " ldxr %w1, [%2]\n"
+ " ldxr %w1, %2\n"
" mov %w0, #0\n"
" cmp %w1, %w3\n"
" b.ne 1f\n"
- " stxr %w0, %w4, [%2]\n"
+ " stxr %w0, %w4, %2\n"
"1:\n"
- : "=&r" (res), "=&r" (oldval)
- : "r" (ptr), "Ir" (old), "r" (new)
+ : "=&r" (res), "=&r" (oldval), "+Q" (*(u32 *)ptr)
+ : "Ir" (old), "r" (new)
: "cc");
} while (res);
break;
@@ -127,14 +127,14 @@
case 8:
do {
asm volatile("// __cmpxchg8\n"
- " ldxr %1, [%2]\n"
+ " ldxr %1, %2\n"
" mov %w0, #0\n"
" cmp %1, %3\n"
" b.ne 1f\n"
- " stxr %w0, %4, [%2]\n"
+ " stxr %w0, %4, %2\n"
"1:\n"
- : "=&r" (res), "=&r" (oldval)
- : "r" (ptr), "Ir" (old), "r" (new)
+ : "=&r" (res), "=&r" (oldval), "+Q" (*(u64 *)ptr)
+ : "Ir" (old), "r" (new)
: "cc");
} while (res);
break;
diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
index 3468ae8..c582fa3 100644
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@@ -39,7 +39,7 @@
" .popsection\n" \
: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp) \
: "r" (oparg), "Ir" (-EFAULT) \
- : "cc")
+ : "cc", "memory")
static inline int
futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index d2f05a6..57f12c9 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -230,6 +230,9 @@
#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
#define iounmap __iounmap
+#define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF)
+#define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PTE_PXN | PTE_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
+
#define ARCH_HAS_IOREMAP_WC
#include <asm-generic/iomap.h>
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 1cac16a..381f556 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -43,6 +43,7 @@
#define PAGE_OFFSET UL(0xffffffc000000000)
#define MODULES_END (PAGE_OFFSET)
#define MODULES_VADDR (MODULES_END - SZ_64M)
+#define EARLYCON_IOBASE (MODULES_VADDR - SZ_4M)
#define VA_BITS (39)
#define TASK_SIZE_64 (UL(1) << VA_BITS)
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index d4f7fd5..2494fc0 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -26,5 +26,6 @@
extern void paging_init(void);
extern void setup_mm_for_reboot(void);
+extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
#endif
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index f68465d..e2bc385 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -35,6 +35,21 @@
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
void __new_context(struct mm_struct *mm);
+#ifdef CONFIG_PID_IN_CONTEXTIDR
+static inline void contextidr_thread_switch(struct task_struct *next)
+{
+ asm(
+ " msr contextidr_el1, %0\n"
+ " isb"
+ :
+ : "r" (task_pid_nr(next)));
+}
+#else
+static inline void contextidr_thread_switch(struct task_struct *next)
+{
+}
+#endif
+
/*
* Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0.
*/
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index a6fffd5..d26d1d5 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -17,6 +17,11 @@
#ifndef __ASM_PERF_EVENT_H
#define __ASM_PERF_EVENT_H
-/* It's quiet around here... */
+#ifdef CONFIG_HW_PERF_EVENTS
+struct pt_regs;
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+#define perf_misc_flags(regs) perf_misc_flags(regs)
+#endif
#endif
diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h
new file mode 100644
index 0000000..0604237
--- /dev/null
+++ b/arch/arm64/include/asm/psci.h
@@ -0,0 +1,38 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 ARM Limited
+ */
+
+#ifndef __ASM_PSCI_H
+#define __ASM_PSCI_H
+
+#define PSCI_POWER_STATE_TYPE_STANDBY 0
+#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1
+
+struct psci_power_state {
+ u16 id;
+ u8 type;
+ u8 affinity_level;
+};
+
+struct psci_operations {
+ int (*cpu_suspend)(struct psci_power_state state,
+ unsigned long entry_point);
+ int (*cpu_off)(struct psci_power_state state);
+ int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
+ int (*migrate)(unsigned long cpuid);
+};
+
+extern struct psci_operations psci_ops;
+
+int psci_init(void);
+
+#endif /* __ASM_PSCI_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 4ce845f..41a71ee 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -42,6 +42,16 @@
#define COMPAT_PSR_MODE_UND 0x0000001b
#define COMPAT_PSR_MODE_SYS 0x0000001f
#define COMPAT_PSR_T_BIT 0x00000020
+#define COMPAT_PSR_F_BIT 0x00000040
+#define COMPAT_PSR_I_BIT 0x00000080
+#define COMPAT_PSR_A_BIT 0x00000100
+#define COMPAT_PSR_E_BIT 0x00000200
+#define COMPAT_PSR_J_BIT 0x01000000
+#define COMPAT_PSR_Q_BIT 0x08000000
+#define COMPAT_PSR_V_BIT 0x10000000
+#define COMPAT_PSR_C_BIT 0x20000000
+#define COMPAT_PSR_Z_BIT 0x40000000
+#define COMPAT_PSR_N_BIT 0x80000000
#define COMPAT_PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
/*
* These are 'magic' values for PTRACE_PEEKUSR that return info about where a
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 7e34295..4b8023c 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -66,4 +66,15 @@
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+struct device_node;
+
+struct smp_enable_ops {
+ const char *name;
+ int (*init_cpu)(struct device_node *, int);
+ int (*prepare_cpu)(int);
+};
+
+extern const struct smp_enable_ops smp_spin_table_ops;
+extern const struct smp_enable_ops smp_psci_ops;
+
#endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index 41112fe..7065e92 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -45,13 +45,13 @@
asm volatile(
" sevl\n"
"1: wfe\n"
- "2: ldaxr %w0, [%1]\n"
+ "2: ldaxr %w0, %1\n"
" cbnz %w0, 1b\n"
- " stxr %w0, %w2, [%1]\n"
+ " stxr %w0, %w2, %1\n"
" cbnz %w0, 2b\n"
- : "=&r" (tmp)
- : "r" (&lock->lock), "r" (1)
- : "memory");
+ : "=&r" (tmp), "+Q" (lock->lock)
+ : "r" (1)
+ : "cc", "memory");
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
@@ -59,13 +59,13 @@
unsigned int tmp;
asm volatile(
- " ldaxr %w0, [%1]\n"
+ " ldaxr %w0, %1\n"
" cbnz %w0, 1f\n"
- " stxr %w0, %w2, [%1]\n"
+ " stxr %w0, %w2, %1\n"
"1:\n"
- : "=&r" (tmp)
- : "r" (&lock->lock), "r" (1)
- : "memory");
+ : "=&r" (tmp), "+Q" (lock->lock)
+ : "r" (1)
+ : "cc", "memory");
return !tmp;
}
@@ -73,8 +73,8 @@
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(
- " stlr %w1, [%0]\n"
- : : "r" (&lock->lock), "r" (0) : "memory");
+ " stlr %w1, %0\n"
+ : "=Q" (lock->lock) : "r" (0) : "memory");
}
/*
@@ -94,13 +94,13 @@
asm volatile(
" sevl\n"
"1: wfe\n"
- "2: ldaxr %w0, [%1]\n"
+ "2: ldaxr %w0, %1\n"
" cbnz %w0, 1b\n"
- " stxr %w0, %w2, [%1]\n"
+ " stxr %w0, %w2, %1\n"
" cbnz %w0, 2b\n"
- : "=&r" (tmp)
- : "r" (&rw->lock), "r" (0x80000000)
- : "memory");
+ : "=&r" (tmp), "+Q" (rw->lock)
+ : "r" (0x80000000)
+ : "cc", "memory");
}
static inline int arch_write_trylock(arch_rwlock_t *rw)
@@ -108,13 +108,13 @@
unsigned int tmp;
asm volatile(
- " ldaxr %w0, [%1]\n"
+ " ldaxr %w0, %1\n"
" cbnz %w0, 1f\n"
- " stxr %w0, %w2, [%1]\n"
+ " stxr %w0, %w2, %1\n"
"1:\n"
- : "=&r" (tmp)
- : "r" (&rw->lock), "r" (0x80000000)
- : "memory");
+ : "=&r" (tmp), "+Q" (rw->lock)
+ : "r" (0x80000000)
+ : "cc", "memory");
return !tmp;
}
@@ -122,8 +122,8 @@
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
asm volatile(
- " stlr %w1, [%0]\n"
- : : "r" (&rw->lock), "r" (0) : "memory");
+ " stlr %w1, %0\n"
+ : "=Q" (rw->lock) : "r" (0) : "memory");
}
/* write_can_lock - would write_trylock() succeed? */
@@ -148,14 +148,14 @@
asm volatile(
" sevl\n"
"1: wfe\n"
- "2: ldaxr %w0, [%2]\n"
+ "2: ldaxr %w0, %2\n"
" add %w0, %w0, #1\n"
" tbnz %w0, #31, 1b\n"
- " stxr %w1, %w0, [%2]\n"
+ " stxr %w1, %w0, %2\n"
" cbnz %w1, 2b\n"
- : "=&r" (tmp), "=&r" (tmp2)
- : "r" (&rw->lock)
- : "memory");
+ : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
+ :
+ : "cc", "memory");
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
@@ -163,13 +163,13 @@
unsigned int tmp, tmp2;
asm volatile(
- "1: ldxr %w0, [%2]\n"
+ "1: ldxr %w0, %2\n"
" sub %w0, %w0, #1\n"
- " stlxr %w1, %w0, [%2]\n"
+ " stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b\n"
- : "=&r" (tmp), "=&r" (tmp2)
- : "r" (&rw->lock)
- : "memory");
+ : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
+ :
+ : "cc", "memory");
}
static inline int arch_read_trylock(arch_rwlock_t *rw)
@@ -177,14 +177,14 @@
unsigned int tmp, tmp2 = 1;
asm volatile(
- " ldaxr %w0, [%2]\n"
+ " ldaxr %w0, %2\n"
" add %w0, %w0, #1\n"
" tbnz %w0, #31, 1f\n"
- " stxr %w1, %w0, [%2]\n"
+ " stxr %w1, %w0, %2\n"
"1:\n"
- : "=&r" (tmp), "+r" (tmp2)
- : "r" (&rw->lock)
- : "memory");
+ : "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock)
+ :
+ : "cc", "memory");
return !tmp2;
}
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index ca5b65f..e4b78bd 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -1,11 +1,14 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += kvm_para.h
+
header-y += auxvec.h
header-y += bitsperlong.h
header-y += byteorder.h
header-y += fcntl.h
header-y += hwcap.h
+header-y += kvm_para.h
header-y += param.h
header-y += ptrace.h
header-y += setup.h
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 74239c3..7b4b564 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -9,14 +9,15 @@
arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
- hyp-stub.o
+ hyp-stub.o psci.o
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
sys_compat.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
-arm64-obj-$(CONFIG_SMP) += smp.o
+arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o smp_psci.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
+arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c
new file mode 100644
index 0000000..7e320a2
--- /dev/null
+++ b/arch/arm64/kernel/early_printk.c
@@ -0,0 +1,118 @@
+/*
+ * Earlyprintk support.
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <linux/amba/serial.h>
+
+static void __iomem *early_base;
+static void (*printch)(char ch);
+
+/*
+ * PL011 single character TX.
+ */
+static void pl011_printch(char ch)
+{
+ while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_TXFF)
+ ;
+ writeb_relaxed(ch, early_base + UART01x_DR);
+ while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_BUSY)
+ ;
+}
+
+struct earlycon_match {
+ const char *name;
+ void (*printch)(char ch);
+};
+
+static const struct earlycon_match earlycon_match[] __initconst = {
+ { .name = "pl011", .printch = pl011_printch, },
+ {}
+};
+
+static void early_write(struct console *con, const char *s, unsigned n)
+{
+ while (n-- > 0) {
+ if (*s == '\n')
+ printch('\r');
+ printch(*s);
+ s++;
+ }
+}
+
+static struct console early_console = {
+ .name = "earlycon",
+ .write = early_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+/*
+ * Parse earlyprintk=... parameter in the format:
+ *
+ * <name>[,<addr>][,<options>]
+ *
+ * and register the early console. It is assumed that the UART has been
+ * initialised by the bootloader already.
+ */
+static int __init setup_early_printk(char *buf)
+{
+ const struct earlycon_match *match = earlycon_match;
+ phys_addr_t paddr = 0;
+
+ if (!buf) {
+ pr_warning("No earlyprintk arguments passed.\n");
+ return 0;
+ }
+
+ while (match->name) {
+ size_t len = strlen(match->name);
+ if (!strncmp(buf, match->name, len)) {
+ buf += len;
+ break;
+ }
+ match++;
+ }
+ if (!match->name) {
+ pr_warning("Unknown earlyprintk arguments: %s\n", buf);
+ return 0;
+ }
+
+ /* I/O address */
+ if (!strncmp(buf, ",0x", 3)) {
+ char *e;
+ paddr = simple_strtoul(buf + 1, &e, 16);
+ buf = e;
+ }
+ /* no options parsing yet */
+
+ if (paddr)
+ early_base = early_io_map(paddr, EARLYCON_IOBASE);
+
+ printch = match->printch;
+ register_console(&early_console);
+
+ return 0;
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 368ad1f..0a0a497 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -82,10 +82,8 @@
#ifdef CONFIG_ARM64_64K_PAGES
#define MM_MMUFLAGS PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
-#define IO_MMUFLAGS PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_XN | PTE_FLAGS
#else
#define MM_MMUFLAGS PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
-#define IO_MMUFLAGS PMD_ATTRINDX(MT_DEVICE_nGnRE) | PMD_SECT_XN | PMD_FLAGS
#endif
/*
@@ -368,6 +366,7 @@
* - identity mapping to enable the MMU (low address, TTBR0)
* - first few MB of the kernel linear mapping to jump to once the MMU has
* been enabled, including the FDT blob (TTBR1)
+ * - UART mapping if CONFIG_EARLY_PRINTK is enabled (TTBR1)
*/
__create_page_tables:
pgtbl x25, x26, x24 // idmap_pg_dir and swapper_pg_dir addresses
@@ -420,6 +419,15 @@
sub x6, x6, #1 // inclusive range
create_block_map x0, x7, x3, x5, x6
1:
+#ifdef CONFIG_EARLY_PRINTK
+ /*
+ * Create the pgd entry for the UART mapping. The full mapping is done
+ * later based earlyprintk kernel parameter.
+ */
+ ldr x5, =EARLYCON_IOBASE // UART virtual address
+ add x0, x26, #2 * PAGE_SIZE // section table address
+ create_pgd_entry x26, x0, x5, x6, x7
+#endif
ret
ENDPROC(__create_page_tables)
.ltorg
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index f7073c7..1e49e5eb 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1331,6 +1331,11 @@
{
struct frame_tail __user *tail;
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ /* We don't support guest os callchain now */
+ return;
+ }
+
tail = (struct frame_tail __user *)regs->regs[29];
while (entry->nr < PERF_MAX_STACK_DEPTH &&
@@ -1355,8 +1360,40 @@
{
struct stackframe frame;
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ /* We don't support guest os callchain now */
+ return;
+ }
+
frame.fp = regs->regs[29];
frame.sp = regs->sp;
frame.pc = regs->pc;
walk_stackframe(&frame, callchain_trace, entry);
}
+
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
+ return perf_guest_cbs->get_guest_ip();
+
+ return instruction_pointer(regs);
+}
+
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+ int misc = 0;
+
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ if (perf_guest_cbs->is_user_mode())
+ misc |= PERF_RECORD_MISC_GUEST_USER;
+ else
+ misc |= PERF_RECORD_MISC_GUEST_KERNEL;
+ } else {
+ if (user_mode(regs))
+ misc |= PERF_RECORD_MISC_USER;
+ else
+ misc |= PERF_RECORD_MISC_KERNEL;
+ }
+
+ return misc;
+}
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index cb0956b..0337cdb 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -45,9 +45,10 @@
#include <asm/compat.h>
#include <asm/cacheflush.h>
+#include <asm/fpsimd.h>
+#include <asm/mmu_context.h>
#include <asm/processor.h>
#include <asm/stacktrace.h>
-#include <asm/fpsimd.h>
static void setup_restart(void)
{
@@ -97,14 +98,9 @@
local_irq_enable();
}
-void (*pm_idle)(void) = default_idle;
-EXPORT_SYMBOL_GPL(pm_idle);
-
/*
- * The idle thread, has rather strange semantics for calling pm_idle,
- * but this is what x86 does and we need to do the same, so that
- * things like cpuidle get called in the same way. The only difference
- * is that we always respect 'hlt_counter' to prevent low power idle.
+ * The idle thread.
+ * We always respect 'hlt_counter' to prevent low power idle.
*/
void cpu_idle(void)
{
@@ -122,10 +118,10 @@
local_irq_disable();
if (!need_resched()) {
stop_critical_timings();
- pm_idle();
+ default_idle();
start_critical_timings();
/*
- * pm_idle functions should always return
+ * default_idle functions should always return
* with IRQs enabled.
*/
WARN_ON(irqs_disabled());
@@ -319,6 +315,7 @@
/* the actual thread switch */
last = cpu_switch_to(prev, next);
+ contextidr_thread_switch(next);
return last;
}
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
new file mode 100644
index 0000000..14f73c4
--- /dev/null
+++ b/arch/arm64/kernel/psci.c
@@ -0,0 +1,211 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define pr_fmt(fmt) "psci: " fmt
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+#include <asm/compiler.h>
+#include <asm/errno.h>
+#include <asm/psci.h>
+
+struct psci_operations psci_ops;
+
+static int (*invoke_psci_fn)(u64, u64, u64, u64);
+
+enum psci_function {
+ PSCI_FN_CPU_SUSPEND,
+ PSCI_FN_CPU_ON,
+ PSCI_FN_CPU_OFF,
+ PSCI_FN_MIGRATE,
+ PSCI_FN_MAX,
+};
+
+static u32 psci_function_id[PSCI_FN_MAX];
+
+#define PSCI_RET_SUCCESS 0
+#define PSCI_RET_EOPNOTSUPP -1
+#define PSCI_RET_EINVAL -2
+#define PSCI_RET_EPERM -3
+
+static int psci_to_linux_errno(int errno)
+{
+ switch (errno) {
+ case PSCI_RET_SUCCESS:
+ return 0;
+ case PSCI_RET_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case PSCI_RET_EINVAL:
+ return -EINVAL;
+ case PSCI_RET_EPERM:
+ return -EPERM;
+ };
+
+ return -EINVAL;
+}
+
+#define PSCI_POWER_STATE_ID_MASK 0xffff
+#define PSCI_POWER_STATE_ID_SHIFT 0
+#define PSCI_POWER_STATE_TYPE_MASK 0x1
+#define PSCI_POWER_STATE_TYPE_SHIFT 16
+#define PSCI_POWER_STATE_AFFL_MASK 0x3
+#define PSCI_POWER_STATE_AFFL_SHIFT 24
+
+static u32 psci_power_state_pack(struct psci_power_state state)
+{
+ return ((state.id & PSCI_POWER_STATE_ID_MASK)
+ << PSCI_POWER_STATE_ID_SHIFT) |
+ ((state.type & PSCI_POWER_STATE_TYPE_MASK)
+ << PSCI_POWER_STATE_TYPE_SHIFT) |
+ ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK)
+ << PSCI_POWER_STATE_AFFL_SHIFT);
+}
+
+/*
+ * The following two functions are invoked via the invoke_psci_fn pointer
+ * and will not be inlined, allowing us to piggyback on the AAPCS.
+ */
+static noinline int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1,
+ u64 arg2)
+{
+ asm volatile(
+ __asmeq("%0", "x0")
+ __asmeq("%1", "x1")
+ __asmeq("%2", "x2")
+ __asmeq("%3", "x3")
+ "hvc #0\n"
+ : "+r" (function_id)
+ : "r" (arg0), "r" (arg1), "r" (arg2));
+
+ return function_id;
+}
+
+static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
+ u64 arg2)
+{
+ asm volatile(
+ __asmeq("%0", "x0")
+ __asmeq("%1", "x1")
+ __asmeq("%2", "x2")
+ __asmeq("%3", "x3")
+ "smc #0\n"
+ : "+r" (function_id)
+ : "r" (arg0), "r" (arg1), "r" (arg2));
+
+ return function_id;
+}
+
+static int psci_cpu_suspend(struct psci_power_state state,
+ unsigned long entry_point)
+{
+ int err;
+ u32 fn, power_state;
+
+ fn = psci_function_id[PSCI_FN_CPU_SUSPEND];
+ power_state = psci_power_state_pack(state);
+ err = invoke_psci_fn(fn, power_state, entry_point, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_off(struct psci_power_state state)
+{
+ int err;
+ u32 fn, power_state;
+
+ fn = psci_function_id[PSCI_FN_CPU_OFF];
+ power_state = psci_power_state_pack(state);
+ err = invoke_psci_fn(fn, power_state, 0, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point)
+{
+ int err;
+ u32 fn;
+
+ fn = psci_function_id[PSCI_FN_CPU_ON];
+ err = invoke_psci_fn(fn, cpuid, entry_point, 0);
+ return psci_to_linux_errno(err);
+}
+
+static int psci_migrate(unsigned long cpuid)
+{
+ int err;
+ u32 fn;
+
+ fn = psci_function_id[PSCI_FN_MIGRATE];
+ err = invoke_psci_fn(fn, cpuid, 0, 0);
+ return psci_to_linux_errno(err);
+}
+
+static const struct of_device_id psci_of_match[] __initconst = {
+ { .compatible = "arm,psci", },
+ {},
+};
+
+int __init psci_init(void)
+{
+ struct device_node *np;
+ const char *method;
+ u32 id;
+ int err = 0;
+
+ np = of_find_matching_node(NULL, psci_of_match);
+ if (!np)
+ return -ENODEV;
+
+ pr_info("probing function IDs from device-tree\n");
+
+ if (of_property_read_string(np, "method", &method)) {
+ pr_warning("missing \"method\" property\n");
+ err = -ENXIO;
+ goto out_put_node;
+ }
+
+ if (!strcmp("hvc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_hvc;
+ } else if (!strcmp("smc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_smc;
+ } else {
+ pr_warning("invalid \"method\" property: %s\n", method);
+ err = -EINVAL;
+ goto out_put_node;
+ }
+
+ if (!of_property_read_u32(np, "cpu_suspend", &id)) {
+ psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
+ psci_ops.cpu_suspend = psci_cpu_suspend;
+ }
+
+ if (!of_property_read_u32(np, "cpu_off", &id)) {
+ psci_function_id[PSCI_FN_CPU_OFF] = id;
+ psci_ops.cpu_off = psci_cpu_off;
+ }
+
+ if (!of_property_read_u32(np, "cpu_on", &id)) {
+ psci_function_id[PSCI_FN_CPU_ON] = id;
+ psci_ops.cpu_on = psci_cpu_on;
+ }
+
+ if (!of_property_read_u32(np, "migrate", &id)) {
+ psci_function_id[PSCI_FN_MIGRATE] = id;
+ psci_ops.migrate = psci_migrate;
+ }
+
+out_put_node:
+ of_node_put(np);
+ return err;
+}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 7665a9b..113db86 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -39,6 +39,7 @@
#include <linux/proc_fs.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
#include <asm/cputype.h>
#include <asm/elf.h>
@@ -49,6 +50,7 @@
#include <asm/tlbflush.h>
#include <asm/traps.h>
#include <asm/memblock.h>
+#include <asm/psci.h>
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
@@ -260,6 +262,8 @@
unflatten_device_tree();
+ psci_init();
+
#ifdef CONFIG_SMP
smp_init_cpus();
#endif
@@ -289,6 +293,13 @@
}
subsys_initcall(topology_init);
+static int __init arm64_device_probe(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ return 0;
+}
+device_initcall(arm64_device_probe);
+
static const char *hwcap_str[] = {
"fp",
"asimd",
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index a4db3d2..41db148 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -76,7 +76,7 @@
struct compat_ucontext {
compat_ulong_t uc_flags;
- struct compat_ucontext *uc_link;
+ compat_uptr_t uc_link;
compat_stack_t uc_stack;
struct compat_sigcontext uc_mcontext;
compat_sigset_t uc_sigmask;
@@ -703,7 +703,7 @@
err |= copy_siginfo_to_user32(&frame->info, info);
__put_user_error(0, &frame->sig.uc.uc_flags, err);
- __put_user_error(NULL, &frame->sig.uc.uc_link, err);
+ __put_user_error(0, &frame->sig.uc.uc_link, err);
memset(&stack, 0, sizeof(stack));
stack.ss_sp = (compat_uptr_t)current->sas_ss_sp;
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 538300f..bdd3459 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -233,7 +233,28 @@
}
static void (*smp_cross_call)(const struct cpumask *, unsigned int);
-static phys_addr_t cpu_release_addr[NR_CPUS];
+
+static const struct smp_enable_ops *enable_ops[] __initconst = {
+ &smp_spin_table_ops,
+ &smp_psci_ops,
+ NULL,
+};
+
+static const struct smp_enable_ops *smp_enable_ops[NR_CPUS];
+
+static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name)
+{
+ const struct smp_enable_ops *ops = enable_ops[0];
+
+ while (ops) {
+ if (!strcmp(name, ops->name))
+ return ops;
+
+ ops++;
+ }
+
+ return NULL;
+}
/*
* Enumerate the possible CPU set from the device tree.
@@ -252,21 +273,21 @@
* We currently support only the "spin-table" enable-method.
*/
enable_method = of_get_property(dn, "enable-method", NULL);
- if (!enable_method || strcmp(enable_method, "spin-table")) {
- pr_err("CPU %d: missing or invalid enable-method property: %s\n",
+ if (!enable_method) {
+ pr_err("CPU %d: missing enable-method property\n", cpu);
+ goto next;
+ }
+
+ smp_enable_ops[cpu] = smp_get_enable_ops(enable_method);
+
+ if (!smp_enable_ops[cpu]) {
+ pr_err("CPU %d: invalid enable-method property: %s\n",
cpu, enable_method);
goto next;
}
- /*
- * Determine the address from which the CPU is polling.
- */
- if (of_property_read_u64(dn, "cpu-release-addr",
- &cpu_release_addr[cpu])) {
- pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
- cpu);
+ if (smp_enable_ops[cpu]->init_cpu(dn, cpu))
goto next;
- }
set_cpu_possible(cpu, true);
next:
@@ -281,8 +302,7 @@
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- int cpu;
- void **release_addr;
+ int cpu, err;
unsigned int ncores = num_possible_cpus();
/*
@@ -291,30 +311,35 @@
if (max_cpus > ncores)
max_cpus = ncores;
+ /* Don't bother if we're effectively UP */
+ if (max_cpus <= 1)
+ return;
+
/*
* Initialise the present map (which describes the set of CPUs
* actually populated at the present time) and release the
* secondaries from the bootloader.
+ *
+ * Make sure we online at most (max_cpus - 1) additional CPUs.
*/
+ max_cpus--;
for_each_possible_cpu(cpu) {
if (max_cpus == 0)
break;
- if (!cpu_release_addr[cpu])
+ if (cpu == smp_processor_id())
continue;
- release_addr = __va(cpu_release_addr[cpu]);
- release_addr[0] = (void *)__pa(secondary_holding_pen);
- __flush_dcache_area(release_addr, sizeof(release_addr[0]));
+ if (!smp_enable_ops[cpu])
+ continue;
+
+ err = smp_enable_ops[cpu]->prepare_cpu(cpu);
+ if (err)
+ continue;
set_cpu_present(cpu, true);
max_cpus--;
}
-
- /*
- * Send an event to wake up the secondaries.
- */
- sev();
}
diff --git a/arch/arm64/kernel/smp_psci.c b/arch/arm64/kernel/smp_psci.c
new file mode 100644
index 0000000..1120916
--- /dev/null
+++ b/arch/arm64/kernel/smp_psci.c
@@ -0,0 +1,52 @@
+/*
+ * PSCI SMP initialisation
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/psci.h>
+
+static int __init smp_psci_init_cpu(struct device_node *dn, int cpu)
+{
+ return 0;
+}
+
+static int __init smp_psci_prepare_cpu(int cpu)
+{
+ int err;
+
+ if (!psci_ops.cpu_on) {
+ pr_err("psci: no cpu_on method, not booting CPU%d\n", cpu);
+ return -ENODEV;
+ }
+
+ err = psci_ops.cpu_on(cpu, __pa(secondary_holding_pen));
+ if (err) {
+ pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
+ return err;
+ }
+
+ return 0;
+}
+
+const struct smp_enable_ops smp_psci_ops __initconst = {
+ .name = "psci",
+ .init_cpu = smp_psci_init_cpu,
+ .prepare_cpu = smp_psci_prepare_cpu,
+};
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
new file mode 100644
index 0000000..7c35fa6
--- /dev/null
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -0,0 +1,66 @@
+/*
+ * Spin Table SMP initialisation
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+
+static phys_addr_t cpu_release_addr[NR_CPUS];
+
+static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
+{
+ /*
+ * Determine the address from which the CPU is polling.
+ */
+ if (of_property_read_u64(dn, "cpu-release-addr",
+ &cpu_release_addr[cpu])) {
+ pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
+ cpu);
+
+ return -1;
+ }
+
+ return 0;
+}
+
+static int __init smp_spin_table_prepare_cpu(int cpu)
+{
+ void **release_addr;
+
+ if (!cpu_release_addr[cpu])
+ return -ENODEV;
+
+ release_addr = __va(cpu_release_addr[cpu]);
+ release_addr[0] = (void *)__pa(secondary_holding_pen);
+ __flush_dcache_area(release_addr, sizeof(release_addr[0]));
+
+ /*
+ * Send an event to wake up the secondary CPU.
+ */
+ sev();
+
+ return 0;
+}
+
+const struct smp_enable_ops smp_spin_table_ops __initconst = {
+ .name = "spin-table",
+ .init_cpu = smp_spin_table_init_cpu,
+ .prepare_cpu = smp_spin_table_prepare_cpu,
+};
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index a6885d8..f4dd585 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -25,6 +25,7 @@
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
+#include <linux/io.h>
#include <asm/cputype.h>
#include <asm/sections.h>
@@ -251,6 +252,47 @@
} while (pgd++, addr = next, addr != end);
}
+#ifdef CONFIG_EARLY_PRINTK
+/*
+ * Create an early I/O mapping using the pgd/pmd entries already populated
+ * in head.S as this function is called too early to allocated any memory. The
+ * mapping size is 2MB with 4KB pages or 64KB or 64KB pages.
+ */
+void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
+{
+ unsigned long size, mask;
+ bool page64k = IS_ENABLED(ARM64_64K_PAGES);
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ /*
+ * No early pte entries with !ARM64_64K_PAGES configuration, so using
+ * sections (pmd).
+ */
+ size = page64k ? PAGE_SIZE : SECTION_SIZE;
+ mask = ~(size - 1);
+
+ pgd = pgd_offset_k(virt);
+ pud = pud_offset(pgd, virt);
+ if (pud_none(*pud))
+ return NULL;
+ pmd = pmd_offset(pud, virt);
+
+ if (page64k) {
+ if (pmd_none(*pmd))
+ return NULL;
+ pte = pte_offset_kernel(pmd, virt);
+ set_pte(pte, __pte((phys & mask) | PROT_DEVICE_nGnRE));
+ } else {
+ set_pmd(pmd, __pmd((phys & mask) | PROT_SECT_DEVICE_nGnRE));
+ }
+
+ return (void __iomem *)((virt & mask) + (phys & ~mask));
+}
+#endif
+
static void __init map_mem(void)
{
struct memblock_region *reg;
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b6f3ad5..67e4aaa 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -24,7 +24,6 @@
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_IDE
- select HAVE_IRQ_WORK
select HAVE_KERNEL_GZIP if RAMKERNEL
select HAVE_KERNEL_BZIP2 if RAMKERNEL
select HAVE_KERNEL_LZMA if RAMKERNEL
@@ -38,7 +37,6 @@
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
- select IRQ_PER_CPU if SMP
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 3e16ad9..8061426 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -39,12 +39,6 @@
void *l1_stack_base;
unsigned long l1_stack_len;
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
-
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
@@ -81,7 +75,6 @@
{
/* endless idle loop with no priority at all */
while (1) {
- void (*idle)(void) = pm_idle;
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 7f65be6..104ff4d 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -54,11 +54,6 @@
EXPORT_SYMBOL(enable_hlt);
-/*
- * The following aren't currently used.
- */
-void (*pm_idle)(void);
-
extern void default_idle(void);
void (*pm_power_off)(void);
@@ -77,16 +72,12 @@
while (1) {
rcu_idle_enter();
while (!need_resched()) {
- void (*idle)(void);
/*
* Mark this as an RCU critical section so that
* synchronize_kernel() in the unload path waits
* for our completion.
*/
- idle = pm_idle;
- if (!idle)
- idle = default_idle;
- idle();
+ default_idle();
}
rcu_idle_exit();
schedule_preempt_disabled();
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 9d26264..17df48f 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -3,7 +3,6 @@
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 0744f7d..e4decc6 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -12,9 +12,7 @@
# select ARCH_WANT_OPTIONAL_GPIOLIB
# select ARCH_REQUIRE_GPIOLIB
# select HAVE_CLK
- # select IRQ_PER_CPU
# select GENERIC_PENDING_IRQ if SMP
- select HAVE_IRQ_WORK
select GENERIC_ATOMIC64
select HAVE_PERF_EVENTS
select HAVE_GENERIC_HARDIRQS
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3279646..00c2e88 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -29,7 +29,6 @@
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
- select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c
index 6192f71..916ffe7 100644
--- a/arch/ia64/hp/common/aml_nfw.c
+++ b/arch/ia64/hp/common/aml_nfw.c
@@ -191,7 +191,7 @@
return aml_nfw_add_global_handler();
}
-static int aml_nfw_remove(struct acpi_device *device, int type)
+static int aml_nfw_remove(struct acpi_device *device)
{
return aml_nfw_remove_global_handler();
}
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 359e68a..faa1bf0 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -52,10 +52,6 @@
/* Asm macros */
-#define ACPI_ASM_MACROS
-#define BREAKPOINT3
-#define ACPI_DISABLE_IRQS() local_irq_disable()
-#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE()
static inline int
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
index 7fcf7f0..e2d3f5b 100644
--- a/arch/ia64/include/asm/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -11,99 +11,19 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING_NATIVE, we measure cpu time in nsec.
* Otherwise we measure cpu time in jiffies using the generic definitions.
*/
#ifndef __IA64_CPUTIME_H
#define __IA64_CPUTIME_H
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+# include <asm-generic/cputime.h>
#else
-
-#include <linux/time.h>
-#include <linux/jiffies.h>
-#include <asm/processor.h>
-
-typedef u64 __nocast cputime_t;
-typedef u64 __nocast cputime64_t;
-
-#define cputime_one_jiffy jiffies_to_cputime(1)
-
-/*
- * Convert cputime <-> jiffies (HZ)
- */
-#define cputime_to_jiffies(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif) \
- (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif) \
- (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
-
-/*
- * Convert cputime <-> microseconds
- */
-#define cputime_to_usecs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_USEC)
-#define usecs_to_cputime(__usecs) \
- (__force cputime_t)((__usecs) * NSEC_PER_USEC)
-#define usecs_to_cputime64(__usecs) \
- (__force cputime64_t)((__usecs) * NSEC_PER_USEC)
-
-/*
- * Convert cputime <-> seconds
- */
-#define cputime_to_secs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs) \
- (__force cputime_t)((__secs) * NSEC_PER_SEC)
-
-/*
- * Convert cputime <-> timespec (nsec)
- */
-static inline cputime_t timespec_to_cputime(const struct timespec *val)
-{
- u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
- return (__force cputime_t) ret;
-}
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
-{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
-}
-
-/*
- * Convert cputime <-> timeval (msec)
- */
-static inline cputime_t timeval_to_cputime(struct timeval *val)
-{
- u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
- return (__force cputime_t) ret;
-}
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
-{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
-}
-
-/*
- * Convert cputime <-> clock (USER_HZ)
- */
-#define cputime_to_clock_t(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x) \
- (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
-
-/*
- * Convert cputime64 to clock.
- */
-#define cputime64_to_clock_t(__ct) \
- cputime_to_clock_t((__force cputime_t)__ct)
-
+# include <asm/processor.h>
+# include <asm-generic/cputime_nsecs.h>
extern void arch_vtime_task_switch(struct task_struct *tsk);
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#endif /* __IA64_CPUTIME_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ff2ae41..020d655 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -31,7 +31,7 @@
mm_segment_t addr_limit; /* user-level address space limit */
int preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */
struct restart_block restart_block;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
__u64 ac_stamp;
__u64 ac_leave;
__u64 ac_stime;
@@ -69,7 +69,7 @@
#define task_stack_page(tsk) ((void *)(tsk))
#define __HAVE_THREAD_FUNCTIONS
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#define setup_thread_stack(p, org) \
*task_thread_info(p) = *task_thread_info(org); \
task_thread_info(p)->ac_stime = 0; \
diff --git a/arch/ia64/include/asm/xen/minstate.h b/arch/ia64/include/asm/xen/minstate.h
index c57fa91..00cf03e 100644
--- a/arch/ia64/include/asm/xen/minstate.h
+++ b/arch/ia64/include/asm/xen/minstate.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/* read ar.itc in advance, and use it before leaving bank 0 */
#define XEN_ACCOUNT_GET_STAMP \
MOV_FROM_ITC(pUStk, p6, r20, r2);
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index a48bd9a..46c9e30 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -41,7 +41,7 @@
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
DEFINE(TI_AC_STAMP, offsetof(struct thread_info, ac_stamp));
DEFINE(TI_AC_LEAVE, offsetof(struct thread_info, ac_leave));
DEFINE(TI_AC_STIME, offsetof(struct thread_info, ac_stime));
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 6bfd842..7a53530 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -724,7 +724,7 @@
#endif
.global __paravirt_work_processed_syscall;
__paravirt_work_processed_syscall:
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
adds r2=PT(LOADRS)+16,r12
MOV_FROM_ITC(pUStk, p9, r22, r19) // fetch time at leave
adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
@@ -762,7 +762,7 @@
ld8 r29=[r2],16 // M0|1 load cr.ipsr
ld8 r28=[r3],16 // M0|1 load cr.iip
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) add r14=TI_AC_LEAVE+IA64_TASK_SIZE,r13
;;
ld8 r30=[r2],16 // M0|1 load cr.ifs
@@ -793,7 +793,7 @@
ld8.fill r1=[r3],16 // M0|1 load r1
(pUStk) mov r17=1 // A
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) st1 [r15]=r17 // M2|3
#else
(pUStk) st1 [r14]=r17 // M2|3
@@ -813,7 +813,7 @@
shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
COVER // B add current frame into dirty partition & set cr.ifs
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
mov r19=ar.bsp // M2 get new backing store pointer
st8 [r14]=r22 // M save time at leave
mov f10=f0 // F clear f10
@@ -948,7 +948,7 @@
adds r16=PT(CR_IPSR)+16,r12
adds r17=PT(CR_IIP)+16,r12
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
.pred.rel.mutex pUStk,pKStk
MOV_FROM_PSR(pKStk, r22, r29) // M2 read PSR now that interrupts are disabled
MOV_FROM_ITC(pUStk, p9, r22, r29) // M fetch time at leave
@@ -981,7 +981,7 @@
;;
ld8.fill r12=[r16],16
ld8.fill r13=[r17],16
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) adds r3=TI_AC_LEAVE+IA64_TASK_SIZE,r18
#else
(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
@@ -989,7 +989,7 @@
;;
ld8 r20=[r16],16 // ar.fpsr
ld8.fill r15=[r17],16
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18 // deferred
#endif
;;
@@ -997,7 +997,7 @@
ld8.fill r2=[r17]
(pUStk) mov r17=1
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mmi_ : ld8 st1 shr;; mmi_ : st8 st1 shr;;
// mib : mov add br -> mib : ld8 add br
// bbb_ : br nop cover;; mbb_ : mov br cover;;
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index e662f17..c4cd45d 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -529,7 +529,7 @@
nop.i 0
;;
mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
MOV_FROM_ITC(p0, p6, r30, r23) // M get cycle for accounting
#else
nop.m 0
@@ -555,7 +555,7 @@
cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1
br.call.sptk.many b7=ia64_syscall_setup // B
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mov.m r30=ar.itc is called in advance
add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2
add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 4738ff7..9be4e49 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1073,7 +1073,7 @@
sched_clock = ia64_native_sched_clock
#endif
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
GLOBAL_ENTRY(cycle_to_cputime)
alloc r16=ar.pfs,1,0,0,0
addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
@@ -1091,7 +1091,7 @@
shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
br.ret.sptk.many rp
END(cycle_to_cputime)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#ifdef CONFIG_IA64_BRL_EMU
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index fa25689..689ffca 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -784,7 +784,7 @@
(p8) adds r28=16,r28 // A switch cr.iip to next bundle
(p9) adds r8=1,r8 // A increment ei to next slot
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
;;
mov b6=r30 // I0 setup syscall handler branch reg early
#else
@@ -801,7 +801,7 @@
//
///////////////////////////////////////////////////////////////////////
st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
MOV_FROM_ITC(p0, p14, r30, r18) // M get cycle for accounting
#else
mov b6=r30 // I0 setup syscall handler branch reg early
@@ -817,7 +817,7 @@
cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited?
br.call.sptk.many b7=ia64_syscall_setup // B
1:
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mov.m r30=ar.itc is called in advance, and r13 is current
add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13 // A
add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13 // A
@@ -1043,7 +1043,7 @@
DBG_FAULT(16)
FAULT(16)
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
/*
* There is no particular reason for this code to be here, other than
* that there happens to be space here that would go unused otherwise.
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index d56753a1..cc82a7d 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -4,7 +4,7 @@
#include "entry.h"
#include "paravirt_inst.h"
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/* read ar.itc in advance, and use it before leaving bank 0 */
#define ACCOUNT_GET_STAMP \
(pUStk) mov.m r20=ar.itc;
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 31360cb..e34f565 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -57,8 +57,6 @@
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
-void (*pm_idle) (void);
-EXPORT_SYMBOL(pm_idle);
void (*pm_power_off) (void);
EXPORT_SYMBOL(pm_power_off);
@@ -301,7 +299,6 @@
if (mark_idle)
(*mark_idle)(1);
- idle = pm_idle;
if (!idle)
idle = default_idle;
(*idle)();
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index aaefd9b..2029cc0 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -1051,7 +1051,6 @@
max_num_phys_stacked = num_phys_stacked;
}
platform_cpu_init();
- pm_idle = default_idle;
}
void __init
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 88a7945..fbaac1a 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -77,7 +77,7 @@
};
static struct clocksource *itc_clocksource;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#include <linux/kernel_stat.h>
@@ -136,13 +136,14 @@
account_system_time(tsk, 0, delta, delta);
}
+EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
account_idle_time(vtime_delta(tsk));
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 765d0f5..bde899e 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -44,36 +44,10 @@
return tsk->thread.lr;
}
-/*
- * Powermanagement idle function, if any..
- */
-static void (*pm_idle)(void) = NULL;
-
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
/*
- * We use this is we don't have any better
- * idle routine..
- */
-static void default_idle(void)
-{
- /* M32R_FIXME: Please use "cpu_sleep" mode. */
- cpu_relax();
-}
-
-/*
- * On SMP it's slightly faster (but much more power-consuming!)
- * to poll the ->work.need_resched flag instead of waiting for the
- * cross-CPU IPI to arrive. Use this option with caution.
- */
-static void poll_idle (void)
-{
- /* M32R_FIXME */
- cpu_relax();
-}
-
-/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
@@ -84,14 +58,8 @@
/* endless idle loop with no priority at all */
while (1) {
rcu_idle_enter();
- while (!need_resched()) {
- void (*idle)(void) = pm_idle;
-
- if (!idle)
- idle = default_idle;
-
- idle();
- }
+ while (!need_resched())
+ cpu_relax();
rcu_idle_exit();
schedule_preempt_disabled();
}
@@ -120,21 +88,6 @@
/* M32R_FIXME */
}
-static int __init idle_setup (char *str)
-{
- if (!strncmp(str, "poll", 4)) {
- printk("using poll in idle threads.\n");
- pm_idle = poll_idle;
- } else if (!strncmp(str, "sleep", 4)) {
- printk("using sleep in idle threads.\n");
- pm_idle = default_idle;
- }
-
- return 1;
-}
-
-__setup("idle=", idle_setup);
-
void show_regs(struct pt_regs * regs)
{
printk("\n");
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
index 292805f..05aa535 100644
--- a/arch/m68k/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -5,7 +5,6 @@
struct scatterlist;
-#ifndef CONFIG_MMU_SUN3
static inline int dma_supported(struct device *dev, u64 mask)
{
return 1;
@@ -111,10 +110,6 @@
return 0;
}
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
/* drivers/base/dma-mapping.c */
extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size);
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 068ad49..655347d 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -20,7 +20,5 @@
obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
obj-$(CONFIG_PCI) += pcibios.o
-ifndef CONFIG_MMU_SUN3
-obj-y += dma.o
-endif
+obj-$(CONFIG_HAS_DMA) += dma.o
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index a5b74f7..6ff2dcf 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -41,7 +41,6 @@
regs->msr, regs->ear, regs->esr, regs->fsr);
}
-void (*pm_idle)(void);
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
@@ -98,8 +97,6 @@
/* endless idle loop with no priority at all */
while (1) {
- void (*idle)(void) = pm_idle;
-
if (!idle)
idle = default_idle;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2ac626a..9becc44 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,7 +4,6 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
@@ -2161,7 +2160,6 @@
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
- select IRQ_PER_CPU
select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index eb09f5a..84f4e97 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -37,12 +37,6 @@
#include "internal.h"
/*
- * power management idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
-/*
* return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
@@ -113,7 +107,6 @@
void (*idle)(void);
smp_rmb();
- idle = pm_idle;
if (!idle) {
#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU)
idle = poll_idle;
diff --git a/arch/openrisc/kernel/idle.c b/arch/openrisc/kernel/idle.c
index 7d618fe..5e8a3b6 100644
--- a/arch/openrisc/kernel/idle.c
+++ b/arch/openrisc/kernel/idle.c
@@ -39,11 +39,6 @@
void (*powersave) (void) = NULL;
-static inline void pm_idle(void)
-{
- barrier();
-}
-
void cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b77feff..a32e34e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -9,14 +9,12 @@
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
select HAVE_GENERIC_HARDIRQS
select BROKEN_RODATA
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP
- select IRQ_PER_CPU
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 17903f1..561ccca 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -118,14 +118,12 @@
select HAVE_SYSCALL_WRAPPERS if PPC64
select GENERIC_ATOMIC64 if PPC32
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
select HAVE_GENERIC_HARDIRQS
select ARCH_WANT_IPC_PARSE_VERSION
select SPARSE_IRQ
- select IRQ_PER_CPU
select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
index 29bb11e..4f35fc4 100644
--- a/arch/powerpc/configs/chroma_defconfig
+++ b/arch/powerpc/configs/chroma_defconfig
@@ -1,6 +1,6 @@
CONFIG_PPC64=y
CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=256
CONFIG_EXPERIMENTAL=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 88fa5c4..f7df836 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -1,6 +1,6 @@
CONFIG_PPC64=y
CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 840a2c2..bcedeea 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,6 +1,6 @@
CONFIG_PPC64=y
CONFIG_ALTIVEC=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 483733b..607559a 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING_NATIVE, we measure cpu time in
* the same units as the timebase. Otherwise we measure cpu time
* in jiffies using the generic definitions.
*/
@@ -16,7 +16,7 @@
#ifndef __POWERPC_CPUTIME_H
#define __POWERPC_CPUTIME_H
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#include <asm-generic/cputime.h>
#ifdef __KERNEL__
static inline void setup_cputime_one_jiffy(void) { }
@@ -231,5 +231,5 @@
static inline void arch_vtime_task_switch(struct task_struct *tsk) { }
#endif /* __KERNEL__ */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 531fe0c..b1e7f2a 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -145,7 +145,7 @@
extern struct kmem_cache *dtl_cache;
/*
- * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
+ * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
* reading from the dispatch trace log. If other code wants to consume
* DTL entries, it can set this pointer to a function that will get
* called once for each DTL entry that gets processed.
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 9710be3..136bba6 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <asm/hw_irq.h>
+#include <linux/device.h>
#define MAX_HWEVENTS 8
#define MAX_EVENT_ALTERNATIVES 8
@@ -35,6 +36,7 @@
void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
int (*limited_pmc_event)(u64 event_id);
u32 flags;
+ const struct attribute_group **attr_groups;
int n_generic;
int *generic_events;
int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
@@ -109,3 +111,27 @@
* If an event_id is not subject to the constraint expressed by a particular
* field, then it will have 0 in both the mask and value for that field.
*/
+
+extern ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page);
+
+/*
+ * EVENT_VAR() is same as PMU_EVENT_VAR with a suffix.
+ *
+ * Having a suffix allows us to have aliases in sysfs - eg: the generic
+ * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and
+ * 'PM_CYC' where the latter is the name by which the event is known in
+ * POWER CPU specification.
+ */
+#define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix
+#define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix).attr.attr
+
+#define EVENT_ATTR(_name, _id, _suffix) \
+ PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_PM_##_id, \
+ power_events_sysfs_show)
+
+#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
+#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+
+#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
+#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index ea2a86e..2d0e1f5 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -24,7 +24,7 @@
* user_time and system_time fields in the paca.
*/
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
#define ACCOUNT_CPU_USER_EXIT(ra, rb)
#define ACCOUNT_STOLEN_TIME
@@ -70,7 +70,7 @@
#endif /* CONFIG_PPC_SPLPAR */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
/*
* Macros for storing registers into and loading registers from
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 3d990d3..ac05701 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -94,7 +94,7 @@
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR)
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
beq 33f
/* if from user, see if there are any DTL entries to process */
@@ -110,7 +110,7 @@
addi r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
/*
* A syscall should always be called with interrupts enabled
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 127361e..f77fa22 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -143,7 +143,7 @@
unsigned long ppc_tb_freq;
EXPORT_SYMBOL_GPL(ppc_tb_freq);
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Factors for converting from cputime_t (timebase ticks) to
* jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
@@ -347,6 +347,7 @@
if (stolen)
account_steal_time(stolen);
}
+EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
@@ -377,7 +378,7 @@
account_user_time(tsk, utime, utimescaled);
}
-#else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#define calc_cputime_factors()
#endif
@@ -668,7 +669,7 @@
struct rtc_time tm;
if (!ppc_md.set_rtc_time)
- return 0;
+ return -ENODEV;
to_tm(now.tv_sec + 1 + timezone_offset, &tm);
tm.tm_year -= 1900;
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index aa2465e..fa476d5 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1305,6 +1305,16 @@
return event->hw.idx;
}
+ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+
+ return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
struct pmu power_pmu = {
.pmu_enable = power_pmu_enable,
.pmu_disable = power_pmu_disable,
@@ -1537,6 +1547,8 @@
pr_info("%s performance monitor hardware support registered\n",
pmu->name);
+ power_pmu.attr_groups = ppmu->attr_groups;
+
#ifdef MSR_HV
/*
* Use FCHV to ignore kernel events if MSR.HV is set.
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 2ee01e3..b554879 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -51,6 +51,18 @@
#define MMCR1_PMCSEL_MSK 0xff
/*
+ * Power7 event codes.
+ */
+#define PME_PM_CYC 0x1e
+#define PME_PM_GCT_NOSLOT_CYC 0x100f8
+#define PME_PM_CMPLU_STALL 0x4000a
+#define PME_PM_INST_CMPL 0x2
+#define PME_PM_LD_REF_L1 0xc880
+#define PME_PM_LD_MISS_L1 0x400f0
+#define PME_PM_BRU_FIN 0x10068
+#define PME_PM_BRU_MPRED 0x400f6
+
+/*
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
@@ -307,14 +319,14 @@
}
static int power7_generic_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
- [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
- [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a, /* CMPLU_STALL */
- [PERF_COUNT_HW_INSTRUCTIONS] = 2,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/
- [PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068, /* BRU_FIN */
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6, /* BR_MPRED */
+ [PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PME_PM_CMPLU_STALL,
+ [PERF_COUNT_HW_INSTRUCTIONS] = PME_PM_INST_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PME_PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PME_PM_LD_MISS_L1,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PME_PM_BRU_FIN,
+ [PERF_COUNT_HW_BRANCH_MISSES] = PME_PM_BRU_MPRED,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
@@ -362,6 +374,57 @@
},
};
+
+GENERIC_EVENT_ATTR(cpu-cycles, CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-frontend, GCT_NOSLOT_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-backend, CMPLU_STALL);
+GENERIC_EVENT_ATTR(instructions, INST_CMPL);
+GENERIC_EVENT_ATTR(cache-references, LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
+GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
+GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+
+POWER_EVENT_ATTR(CYC, CYC);
+POWER_EVENT_ATTR(GCT_NOSLOT_CYC, GCT_NOSLOT_CYC);
+POWER_EVENT_ATTR(CMPLU_STALL, CMPLU_STALL);
+POWER_EVENT_ATTR(INST_CMPL, INST_CMPL);
+POWER_EVENT_ATTR(LD_REF_L1, LD_REF_L1);
+POWER_EVENT_ATTR(LD_MISS_L1, LD_MISS_L1);
+POWER_EVENT_ATTR(BRU_FIN, BRU_FIN)
+POWER_EVENT_ATTR(BRU_MPRED, BRU_MPRED);
+
+static struct attribute *power7_events_attr[] = {
+ GENERIC_EVENT_PTR(CYC),
+ GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
+ GENERIC_EVENT_PTR(CMPLU_STALL),
+ GENERIC_EVENT_PTR(INST_CMPL),
+ GENERIC_EVENT_PTR(LD_REF_L1),
+ GENERIC_EVENT_PTR(LD_MISS_L1),
+ GENERIC_EVENT_PTR(BRU_FIN),
+ GENERIC_EVENT_PTR(BRU_MPRED),
+
+ POWER_EVENT_PTR(CYC),
+ POWER_EVENT_PTR(GCT_NOSLOT_CYC),
+ POWER_EVENT_PTR(CMPLU_STALL),
+ POWER_EVENT_PTR(INST_CMPL),
+ POWER_EVENT_PTR(LD_REF_L1),
+ POWER_EVENT_PTR(LD_MISS_L1),
+ POWER_EVENT_PTR(BRU_FIN),
+ POWER_EVENT_PTR(BRU_MPRED),
+ NULL
+};
+
+
+static struct attribute_group power7_pmu_events_group = {
+ .name = "events",
+ .attrs = power7_events_attr,
+};
+
+static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power7_pmu_events_group,
+ NULL,
+};
+
static struct power_pmu power7_pmu = {
.name = "POWER7",
.n_counter = 6,
@@ -373,6 +436,7 @@
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
.flags = PPMU_ALT_SIPR,
+ .attr_groups = power7_pmu_attr_groups,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 25db92a..4931838 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -24,6 +24,7 @@
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index a764854..0cc0ac0 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -57,7 +57,7 @@
*/
static int dtl_buf_entries = N_DISPATCH_LOG;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
struct dtl_ring {
u64 write_index;
struct dtl_entry *write_ptr;
@@ -142,7 +142,7 @@
return per_cpu(dtl_rings, dtl->cpu).write_index;
}
-#else /* CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int dtl_start(struct dtl *dtl)
{
@@ -188,7 +188,7 @@
{
return lppaca_of(dtl->cpu).dtl_idx;
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int dtl_enable(struct dtl *dtl)
{
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ca55882..527e12c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -281,7 +281,7 @@
struct kmem_cache *dtl_cache;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Allocate space for the dispatch trace log for all possible cpus
* and register the buffers with the hypervisor. This is used for
@@ -332,12 +332,12 @@
return 0;
}
-#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static inline int alloc_dispatch_logs(void)
{
return 0;
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int alloc_dispatch_log_kmem_cache(void)
{
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index d913063..81c3314 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -414,7 +414,7 @@
goto error_sramclean;
}
- if (!request_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma),
+ if (!request_mem_region(res_bcom.start, resource_size(&res_bcom),
DRIVER_NAME)) {
printk(KERN_ERR DRIVER_NAME ": "
"Can't request registers region\n");
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b5ea38c..c15ba7d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -78,7 +78,6 @@
select HAVE_KVM if 64BIT
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index e84b8b6..ce9cc5a 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -127,7 +127,7 @@
* Update process times based on virtual cpu times stored by entry.S
* to the lowcore fields user_timer, system_timer & steal_clock.
*/
-void vtime_account(struct task_struct *tsk)
+void vtime_account_irq_enter(struct task_struct *tsk)
{
struct thread_info *ti = task_thread_info(tsk);
u64 timer, system;
@@ -145,10 +145,10 @@
virt_timer_forward(system);
}
-EXPORT_SYMBOL_GPL(vtime_account);
+EXPORT_SYMBOL_GPL(vtime_account_irq_enter);
void vtime_account_system(struct task_struct *tsk)
-__attribute__((alias("vtime_account")));
+__attribute__((alias("vtime_account_irq_enter")));
EXPORT_SYMBOL_GPL(vtime_account_system);
void __kprobes vtime_stop_cpu(void)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index babc2b8..9c833c5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -11,7 +11,6 @@
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_CUSTOM_GPIO_H
@@ -91,9 +90,6 @@
config GENERIC_HWEIGHT
def_bool y
-config IRQ_PER_CPU
- def_bool y
-
config GENERIC_GPIO
def_bool n
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 0c91016..3d5a1b3 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -22,7 +22,7 @@
#include <asm/smp.h>
#include <asm/bl_bit.h>
-void (*pm_idle)(void);
+static void (*sh_idle)(void);
static int hlt_counter;
@@ -103,9 +103,9 @@
/* Don't trace irqs off for idle */
stop_critical_timings();
if (cpuidle_idle_call())
- pm_idle();
+ sh_idle();
/*
- * Sanity check to ensure that pm_idle() returns
+ * Sanity check to ensure that sh_idle() returns
* with IRQs enabled
*/
WARN_ON(irqs_disabled());
@@ -123,13 +123,13 @@
/*
* If a platform has set its own idle routine, leave it alone.
*/
- if (pm_idle)
+ if (sh_idle)
return;
if (hlt_works())
- pm_idle = default_idle;
+ sh_idle = default_idle;
else
- pm_idle = poll_idle;
+ sh_idle = poll_idle;
}
void stop_this_cpu(void *unused)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9f2edb5..9bff3db 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -23,7 +23,6 @@
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select RTC_CLASS
select RTC_DRV_M48T59
- select HAVE_IRQ_WORK
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
@@ -61,6 +60,7 @@
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_SYSCALL_WRAPPERS
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_SYSCALL_TRACEPOINTS
diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
index 9661e9b..7eb57d2 100644
--- a/arch/sparc/include/asm/hugetlb.h
+++ b/arch/sparc/include/asm/hugetlb.h
@@ -12,7 +12,6 @@
static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
{
- hugetlb_setup(mm);
}
static inline int is_hugepage_only_range(struct mm_struct *mm,
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index 4b39f74..e155388 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -27,8 +27,8 @@
#ifndef __ASSEMBLY__
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
-struct mm_struct;
-extern void hugetlb_setup(struct mm_struct *mm);
+struct pt_regs;
+extern void hugetlb_setup(struct pt_regs *regs);
#endif
#define WANT_PAGE_VIRTUAL
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 7870be0..08fcce90 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -71,7 +71,6 @@
#define PMD_PADDR _AC(0xfffffffe,UL)
#define PMD_PADDR_SHIFT _AC(11,UL)
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define PMD_ISHUGE _AC(0x00000001,UL)
/* This is the PMD layout when PMD_ISHUGE is set. With 4MB huge
@@ -86,7 +85,6 @@
#define PMD_HUGE_ACCESSED _AC(0x00000080,UL)
#define PMD_HUGE_EXEC _AC(0x00000040,UL)
#define PMD_HUGE_SPLITTING _AC(0x00000020,UL)
-#endif
/* PGDs point to PMD tables which are 8K aligned. */
#define PGD_PADDR _AC(0xfffffffc,UL)
@@ -628,6 +626,12 @@
return pte_val(pte) & _PAGE_SPECIAL;
}
+static inline int pmd_large(pmd_t pmd)
+{
+ return (pmd_val(pmd) & (PMD_ISHUGE | PMD_HUGE_PRESENT)) ==
+ (PMD_ISHUGE | PMD_HUGE_PRESENT);
+}
+
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
static inline int pmd_young(pmd_t pmd)
{
@@ -646,12 +650,6 @@
return val >> (PAGE_SHIFT - PMD_PADDR_SHIFT);
}
-static inline int pmd_large(pmd_t pmd)
-{
- return (pmd_val(pmd) & (PMD_ISHUGE | PMD_HUGE_PRESENT)) ==
- (PMD_ISHUGE | PMD_HUGE_PRESENT);
-}
-
static inline int pmd_trans_splitting(pmd_t pmd)
{
return (pmd_val(pmd) & (PMD_ISHUGE|PMD_HUGE_SPLITTING)) ==
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
index c1e0191..2c7baa4 100644
--- a/arch/sparc/include/asm/processor_32.h
+++ b/arch/sparc/include/asm/processor_32.h
@@ -118,6 +118,7 @@
extern struct task_struct *last_task_used_math;
#define cpu_relax() barrier()
+extern void (*sparc_idle)(void);
#endif
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
index b4c258d..e696432 100644
--- a/arch/sparc/include/asm/tsb.h
+++ b/arch/sparc/include/asm/tsb.h
@@ -157,17 +157,26 @@
andn REG2, 0x7, REG2; \
add REG1, REG2, REG1;
- /* This macro exists only to make the PMD translator below easier
- * to read. It hides the ELF section switch for the sun4v code
- * patching.
+ /* These macros exists only to make the PMD translator below
+ * easier to read. It hides the ELF section switch for the
+ * sun4v code patching.
*/
-#define OR_PTE_BIT(REG, NAME) \
+#define OR_PTE_BIT_1INSN(REG, NAME) \
661: or REG, _PAGE_##NAME##_4U, REG; \
.section .sun4v_1insn_patch, "ax"; \
.word 661b; \
or REG, _PAGE_##NAME##_4V, REG; \
.previous;
+#define OR_PTE_BIT_2INSN(REG, TMP, NAME) \
+661: sethi %hi(_PAGE_##NAME##_4U), TMP; \
+ or REG, TMP, REG; \
+ .section .sun4v_2insn_patch, "ax"; \
+ .word 661b; \
+ mov -1, TMP; \
+ or REG, _PAGE_##NAME##_4V, REG; \
+ .previous;
+
/* Load into REG the PTE value for VALID, CACHE, and SZHUGE. */
#define BUILD_PTE_VALID_SZHUGE_CACHE(REG) \
661: sethi %uhi(_PAGE_VALID|_PAGE_SZHUGE_4U), REG; \
@@ -214,12 +223,13 @@
andn REG1, PMD_HUGE_PROTBITS, REG2; \
sllx REG2, PMD_PADDR_SHIFT, REG2; \
/* REG2 now holds PFN << PAGE_SHIFT */ \
- andcc REG1, PMD_HUGE_EXEC, %g0; \
+ andcc REG1, PMD_HUGE_WRITE, %g0; \
bne,a,pt %xcc, 1f; \
- OR_PTE_BIT(REG2, EXEC); \
-1: andcc REG1, PMD_HUGE_WRITE, %g0; \
- bne,a,pt %xcc, 1f; \
- OR_PTE_BIT(REG2, W); \
+ OR_PTE_BIT_1INSN(REG2, W); \
+1: andcc REG1, PMD_HUGE_EXEC, %g0; \
+ be,pt %xcc, 1f; \
+ nop; \
+ OR_PTE_BIT_2INSN(REG2, REG1, EXEC); \
/* REG1 can now be clobbered, build final PTE */ \
1: BUILD_PTE_VALID_SZHUGE_CACHE(REG1); \
ba,pt %xcc, PTE_LABEL; \
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 348fa1a..eefda32 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -20,6 +20,7 @@
#include <asm/uaccess.h>
#include <asm/auxio.h>
#include <asm/apc.h>
+#include <asm/processor.h>
/* Debugging
*
@@ -158,7 +159,7 @@
/* Assign power management IDLE handler */
if (!apc_no_idle)
- pm_idle = apc_swift_idle;
+ sparc_idle = apc_swift_idle;
printk(KERN_INFO "%s: power management initialized%s\n",
APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index 291bb5d..a702d9a 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -48,6 +48,10 @@
extern void sun4m_unmask_profile_irq(void);
extern void sun4m_clear_profile_irq(int cpu);
+/* sun4m_smp.c */
+void sun4m_cpu_pre_starting(void *arg);
+void sun4m_cpu_pre_online(void *arg);
+
/* sun4d_irq.c */
extern spinlock_t sun4d_imsk_lock;
@@ -60,6 +64,14 @@
extern void sun4d_distribute_irqs(void);
extern void sun4d_free_irq(unsigned int irq, void *dev_id);
+/* sun4d_smp.c */
+void sun4d_cpu_pre_starting(void *arg);
+void sun4d_cpu_pre_online(void *arg);
+
+/* leon_smp.c */
+void leon_cpu_pre_starting(void *arg);
+void leon_cpu_pre_online(void *arg);
+
/* head_32.S */
extern unsigned int t_nmi[];
extern unsigned int linux_trap_ipi15_sun4d[];
diff --git a/arch/sparc/kernel/leon_pmc.c b/arch/sparc/kernel/leon_pmc.c
index 4e17432..708bca4 100644
--- a/arch/sparc/kernel/leon_pmc.c
+++ b/arch/sparc/kernel/leon_pmc.c
@@ -9,6 +9,7 @@
#include <asm/leon_amba.h>
#include <asm/cpu_type.h>
#include <asm/leon.h>
+#include <asm/processor.h>
/* List of Systems that need fixup instructions around power-down instruction */
unsigned int pmc_leon_fixup_ids[] = {
@@ -69,9 +70,9 @@
if (sparc_cpu_model == sparc_leon) {
/* Assign power management IDLE handler */
if (pmc_leon_need_fixup())
- pm_idle = pmc_leon_idle_fixup;
+ sparc_idle = pmc_leon_idle_fixup;
else
- pm_idle = pmc_leon_idle;
+ sparc_idle = pmc_leon_idle;
printk(KERN_INFO "leon: power management initialized\n");
}
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 0f3fb6d..9b40c9c 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -69,31 +69,19 @@
return val;
}
-void __cpuinit leon_callin(void)
+void __cpuinit leon_cpu_pre_starting(void *arg)
+{
+ leon_configure_cache_smp();
+}
+
+void __cpuinit leon_cpu_pre_online(void *arg)
{
int cpuid = hard_smp_processor_id();
- local_ops->cache_all();
- local_ops->tlb_all();
- leon_configure_cache_smp();
-
- notify_cpu_starting(cpuid);
-
- /* Get our local ticker going. */
- register_percpu_ce(cpuid);
-
- calibrate_delay();
- smp_store_cpu_info(cpuid);
-
- local_ops->cache_all();
- local_ops->tlb_all();
-
- /*
- * Unblock the master CPU _only_ when the scheduler state
- * of all secondary CPUs will be up-to-date, so after
- * the SMP initialization the master will be just allowed
- * to call the scheduler code.
- * Allow master to continue.
+ /* Allow master to continue. The master will then give us the
+ * go-ahead by setting the smp_commenced_mask and will wait without
+ * timeouts until our setup is completed fully (signified by
+ * our bit being set in the cpu_online_mask).
*/
do_swap(&cpu_callin_map[cpuid], 1);
@@ -110,9 +98,6 @@
while (!cpumask_test_cpu(cpuid, &smp_commenced_mask))
mb();
-
- local_irq_enable();
- set_cpu_online(cpuid, true);
}
/*
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index dcbb62f..8b7297f 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -17,6 +17,7 @@
#include <asm/oplib.h>
#include <asm/uaccess.h>
#include <asm/auxio.h>
+#include <asm/processor.h>
/* Debug
*
@@ -63,7 +64,7 @@
#ifndef PMC_NO_IDLE
/* Assign power management IDLE handler */
- pm_idle = pmc_swift_idle;
+ sparc_idle = pmc_swift_idle;
#endif
printk(KERN_INFO "%s: power management initialized\n", PMC_DEVNAME);
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index be8e862..62eede1 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -43,8 +43,7 @@
* Power management idle function
* Set in pm platform drivers (apc.c and pmc.c)
*/
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
+void (*sparc_idle)(void);
/*
* Power-off handler instantiation for pm.h compliance
@@ -75,8 +74,8 @@
/* endless idle loop with no priority at all */
for (;;) {
while (!need_resched()) {
- if (pm_idle)
- (*pm_idle)();
+ if (sparc_idle)
+ (*sparc_idle)();
else
cpu_relax();
}
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 1303021..9f20566 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -64,7 +64,7 @@
err = -ENODEV;
mutex_lock(&of_set_property_mutex);
- write_lock(&devtree_lock);
+ raw_spin_lock(&devtree_lock);
prevp = &dp->properties;
while (*prevp) {
struct property *prop = *prevp;
@@ -91,7 +91,7 @@
}
prevp = &(*prevp)->next;
}
- write_unlock(&devtree_lock);
+ raw_spin_unlock(&devtree_lock);
mutex_unlock(&of_set_property_mutex);
/* XXX Upate procfs if necessary... */
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index 1271b3a..be5bdf9 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -554,10 +554,8 @@
regs = pr->phys_addr;
iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC);
- if (!iommu)
- goto fatal_memory_error;
strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC);
- if (!strbuf)
+ if (!iommu || !strbuf)
goto fatal_memory_error;
op->dev.archdata.iommu = iommu;
@@ -656,6 +654,8 @@
return;
fatal_memory_error:
+ kfree(iommu);
+ kfree(strbuf);
prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
}
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 79db45e..9e7e6d7 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -20,6 +20,7 @@
#include <linux/seq_file.h>
#include <linux/cache.h>
#include <linux/delay.h>
+#include <linux/cpu.h>
#include <asm/ptrace.h>
#include <linux/atomic.h>
@@ -32,8 +33,10 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/cpudata.h>
+#include <asm/timer.h>
#include <asm/leon.h>
+#include "kernel.h"
#include "irq.h"
volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
@@ -294,6 +297,89 @@
return ret;
}
+void __cpuinit arch_cpu_pre_starting(void *arg)
+{
+ local_ops->cache_all();
+ local_ops->tlb_all();
+
+ switch(sparc_cpu_model) {
+ case sun4m:
+ sun4m_cpu_pre_starting(arg);
+ break;
+ case sun4d:
+ sun4d_cpu_pre_starting(arg);
+ break;
+ case sparc_leon:
+ leon_cpu_pre_starting(arg);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __cpuinit arch_cpu_pre_online(void *arg)
+{
+ unsigned int cpuid = hard_smp_processor_id();
+
+ register_percpu_ce(cpuid);
+
+ calibrate_delay();
+ smp_store_cpu_info(cpuid);
+
+ local_ops->cache_all();
+ local_ops->tlb_all();
+
+ switch(sparc_cpu_model) {
+ case sun4m:
+ sun4m_cpu_pre_online(arg);
+ break;
+ case sun4d:
+ sun4d_cpu_pre_online(arg);
+ break;
+ case sparc_leon:
+ leon_cpu_pre_online(arg);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __cpuinit sparc_start_secondary(void *arg)
+{
+ unsigned int cpu;
+
+ /*
+ * SMP booting is extremely fragile in some architectures. So run
+ * the cpu initialization code first before anything else.
+ */
+ arch_cpu_pre_starting(arg);
+
+ preempt_disable();
+ cpu = smp_processor_id();
+
+ /* Invoke the CPU_STARTING notifier callbacks */
+ notify_cpu_starting(cpu);
+
+ arch_cpu_pre_online(arg);
+
+ /* Set the CPU in the cpu_online_mask */
+ set_cpu_online(cpu, true);
+
+ /* Enable local interrupts now */
+ local_irq_enable();
+
+ wmb();
+ cpu_idle();
+
+ /* We should never reach here! */
+ BUG();
+}
+
+void __cpuinit smp_callin(void)
+{
+ sparc_start_secondary(NULL);
+}
+
void smp_bogo(struct seq_file *m)
{
int i;
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index ddaea31..c9eb82f 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -50,10 +50,9 @@
"i" (ASI_M_CTL));
}
-void __cpuinit smp4d_callin(void)
+void __cpuinit sun4d_cpu_pre_starting(void *arg)
{
int cpuid = hard_smp_processor_id();
- unsigned long flags;
/* Show we are alive */
cpu_leds[cpuid] = 0x6;
@@ -61,26 +60,20 @@
/* Enable level15 interrupt, disable level14 interrupt for now */
cc_set_imsk((cc_get_imsk() & ~0x8000) | 0x4000);
+}
- local_ops->cache_all();
- local_ops->tlb_all();
+void __cpuinit sun4d_cpu_pre_online(void *arg)
+{
+ unsigned long flags;
+ int cpuid;
- notify_cpu_starting(cpuid);
- /*
- * Unblock the master CPU _only_ when the scheduler state
+ cpuid = hard_smp_processor_id();
+
+ /* Unblock the master CPU _only_ when the scheduler state
* of all secondary CPUs will be up-to-date, so after
* the SMP initialization the master will be just allowed
* to call the scheduler code.
*/
- /* Get our local ticker going. */
- register_percpu_ce(cpuid);
-
- calibrate_delay();
- smp_store_cpu_info(cpuid);
- local_ops->cache_all();
- local_ops->tlb_all();
-
- /* Allow master to continue. */
sun4d_swap((unsigned long *)&cpu_callin_map[cpuid], 1);
local_ops->cache_all();
local_ops->tlb_all();
@@ -106,16 +99,12 @@
local_ops->cache_all();
local_ops->tlb_all();
- local_irq_enable(); /* We don't allow PIL 14 yet */
-
while (!cpumask_test_cpu(cpuid, &smp_commenced_mask))
barrier();
spin_lock_irqsave(&sun4d_imsk_lock, flags);
cc_set_imsk(cc_get_imsk() & ~0x4000); /* Allow PIL 14 as well */
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
- set_cpu_online(cpuid, true);
-
}
/*
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 128af73..8a65f15 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -34,30 +34,19 @@
return val;
}
-void __cpuinit smp4m_callin(void)
+void __cpuinit sun4m_cpu_pre_starting(void *arg)
+{
+}
+
+void __cpuinit sun4m_cpu_pre_online(void *arg)
{
int cpuid = hard_smp_processor_id();
- local_ops->cache_all();
- local_ops->tlb_all();
-
- notify_cpu_starting(cpuid);
-
- register_percpu_ce(cpuid);
-
- calibrate_delay();
- smp_store_cpu_info(cpuid);
-
- local_ops->cache_all();
- local_ops->tlb_all();
-
- /*
- * Unblock the master CPU _only_ when the scheduler state
- * of all secondary CPUs will be up-to-date, so after
- * the SMP initialization the master will be just allowed
- * to call the scheduler code.
+ /* Allow master to continue. The master will then give us the
+ * go-ahead by setting the smp_commenced_mask and will wait without
+ * timeouts until our setup is completed fully (signified by
+ * our bit being set in the cpu_online_mask).
*/
- /* Allow master to continue. */
swap_ulong(&cpu_callin_map[cpuid], 1);
/* XXX: What's up with all the flushes? */
@@ -75,10 +64,6 @@
while (!cpumask_test_cpu(cpuid, &smp_commenced_mask))
mb();
-
- local_irq_enable();
-
- set_cpu_online(cpuid, true);
}
/*
diff --git a/arch/sparc/kernel/trampoline_32.S b/arch/sparc/kernel/trampoline_32.S
index af27aca..6cdb08c 100644
--- a/arch/sparc/kernel/trampoline_32.S
+++ b/arch/sparc/kernel/trampoline_32.S
@@ -79,18 +79,15 @@
nop
/* Start this processor. */
- call smp4m_callin
+ call smp_callin
nop
- b,a smp_do_cpu_idle
+ b,a smp_panic
.text
.align 4
-smp_do_cpu_idle:
- call cpu_idle
- mov 0, %o0
-
+smp_panic:
call cpu_panic
nop
@@ -144,10 +141,10 @@
nop
/* Start this processor. */
- call smp4d_callin
+ call smp_callin
nop
- b,a smp_do_cpu_idle
+ b,a smp_panic
__CPUINIT
.align 4
@@ -201,7 +198,7 @@
nop
/* Start this processor. */
- call leon_callin
+ call smp_callin
nop
- b,a smp_do_cpu_idle
+ b,a smp_panic
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index d4bdc7a..a313e4a 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -136,12 +136,43 @@
nop
/* It is a huge page, use huge page TSB entry address we
- * calculated above.
+ * calculated above. If the huge page TSB has not been
+ * allocated, setup a trap stack and call hugetlb_setup()
+ * to do so, then return from the trap to replay the TLB
+ * miss.
+ *
+ * This is necessary to handle the case of transparent huge
+ * pages where we don't really have a non-atomic context
+ * in which to allocate the hugepage TSB hash table. When
+ * the 'mm' faults in the hugepage for the first time, we
+ * thus handle it here. This also makes sure that we can
+ * allocate the TSB hash table on the correct NUMA node.
*/
TRAP_LOAD_TRAP_BLOCK(%g7, %g2)
- ldx [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP], %g2
- cmp %g2, -1
- movne %xcc, %g2, %g1
+ ldx [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP], %g1
+ cmp %g1, -1
+ bne,pt %xcc, 60f
+ nop
+
+661: rdpr %pstate, %g5
+ wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate
+ .section .sun4v_2insn_patch, "ax"
+ .word 661b
+ SET_GL(1)
+ nop
+ .previous
+
+ rdpr %tl, %g3
+ cmp %g3, 1
+ bne,pn %xcc, winfix_trampoline
+ nop
+ ba,pt %xcc, etrap
+ rd %pc, %g7
+ call hugetlb_setup
+ add %sp, PTREGS_OFF, %o0
+ ba,pt %xcc, rtrap
+ nop
+
60:
#endif
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 097aee7..5062ff3 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -472,8 +472,13 @@
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
mm_rss = mm->context.huge_pte_count;
if (unlikely(mm_rss >
- mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit))
- tsb_grow(mm, MM_TSB_HUGE, mm_rss);
+ mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) {
+ if (mm->context.tsb_block[MM_TSB_HUGE].tsb)
+ tsb_grow(mm, MM_TSB_HUGE, mm_rss);
+ else
+ hugetlb_setup(regs);
+
+ }
#endif
return;
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 42c55df..01ee23d 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -66,6 +66,56 @@
return 1;
}
+static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
+ unsigned long end, int write, struct page **pages,
+ int *nr)
+{
+ struct page *head, *page, *tail;
+ u32 mask;
+ int refs;
+
+ mask = PMD_HUGE_PRESENT;
+ if (write)
+ mask |= PMD_HUGE_WRITE;
+ if ((pmd_val(pmd) & mask) != mask)
+ return 0;
+
+ refs = 0;
+ head = pmd_page(pmd);
+ page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+ tail = page;
+ do {
+ VM_BUG_ON(compound_head(page) != head);
+ pages[*nr] = page;
+ (*nr)++;
+ page++;
+ refs++;
+ } while (addr += PAGE_SIZE, addr != end);
+
+ if (!page_cache_add_speculative(head, refs)) {
+ *nr -= refs;
+ return 0;
+ }
+
+ if (unlikely(pmd_val(pmd) != pmd_val(*pmdp))) {
+ *nr -= refs;
+ while (refs--)
+ put_page(head);
+ return 0;
+ }
+
+ /* Any tail page need their mapcount reference taken before we
+ * return.
+ */
+ while (refs--) {
+ if (PageTail(tail))
+ get_huge_page_tail(tail);
+ tail++;
+ }
+
+ return 1;
+}
+
static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
int write, struct page **pages, int *nr)
{
@@ -77,9 +127,14 @@
pmd_t pmd = *pmdp;
next = pmd_addr_end(addr, end);
- if (pmd_none(pmd))
+ if (pmd_none(pmd) || pmd_trans_splitting(pmd))
return 0;
- if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ if (unlikely(pmd_large(pmd))) {
+ if (!gup_huge_pmd(pmdp, pmd, addr, next,
+ write, pages, nr))
+ return 0;
+ } else if (!gup_pte_range(pmd, addr, next, write,
+ pages, nr))
return 0;
} while (pmdp++, addr = next, addr != end);
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index c3b7242..82bbf04 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -314,16 +314,31 @@
struct tsb *tsb = mm->context.tsb_block[tsb_index].tsb;
unsigned long tag;
+ if (unlikely(!tsb))
+ return;
+
tsb += ((address >> tsb_hash_shift) &
(mm->context.tsb_block[tsb_index].tsb_nentries - 1UL));
tag = (address >> 22UL);
tsb_insert(tsb, tag, tte);
}
+#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
+static inline bool is_hugetlb_pte(pte_t pte)
+{
+ if ((tlb_type == hypervisor &&
+ (pte_val(pte) & _PAGE_SZALL_4V) == _PAGE_SZHUGE_4V) ||
+ (tlb_type != hypervisor &&
+ (pte_val(pte) & _PAGE_SZALL_4U) == _PAGE_SZHUGE_4U))
+ return true;
+ return false;
+}
+#endif
+
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
- unsigned long tsb_index, tsb_hash_shift, flags;
struct mm_struct *mm;
+ unsigned long flags;
pte_t pte = *ptep;
if (tlb_type != hypervisor) {
@@ -335,25 +350,16 @@
mm = vma->vm_mm;
- tsb_index = MM_TSB_BASE;
- tsb_hash_shift = PAGE_SHIFT;
-
spin_lock_irqsave(&mm->context.lock, flags);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
- if (mm->context.tsb_block[MM_TSB_HUGE].tsb != NULL) {
- if ((tlb_type == hypervisor &&
- (pte_val(pte) & _PAGE_SZALL_4V) == _PAGE_SZHUGE_4V) ||
- (tlb_type != hypervisor &&
- (pte_val(pte) & _PAGE_SZALL_4U) == _PAGE_SZHUGE_4U)) {
- tsb_index = MM_TSB_HUGE;
- tsb_hash_shift = HPAGE_SHIFT;
- }
- }
+ if (mm->context.huge_pte_count && is_hugetlb_pte(pte))
+ __update_mmu_tsb_insert(mm, MM_TSB_HUGE, HPAGE_SHIFT,
+ address, pte_val(pte));
+ else
#endif
-
- __update_mmu_tsb_insert(mm, tsb_index, tsb_hash_shift,
- address, pte_val(pte));
+ __update_mmu_tsb_insert(mm, MM_TSB_BASE, PAGE_SHIFT,
+ address, pte_val(pte));
spin_unlock_irqrestore(&mm->context.lock, flags);
}
@@ -2712,14 +2718,28 @@
load_secondary_context(mm);
}
-void hugetlb_setup(struct mm_struct *mm)
+void hugetlb_setup(struct pt_regs *regs)
{
- struct tsb_config *tp = &mm->context.tsb_block[MM_TSB_HUGE];
+ struct mm_struct *mm = current->mm;
+ struct tsb_config *tp;
- if (likely(tp->tsb != NULL))
- return;
+ if (in_atomic() || !mm) {
+ const struct exception_table_entry *entry;
- tsb_grow(mm, MM_TSB_HUGE, 0);
+ entry = search_exception_tables(regs->tpc);
+ if (entry) {
+ regs->tpc = entry->fixup;
+ regs->tnpc = regs->tpc + 4;
+ return;
+ }
+ pr_alert("Unexpected HugeTLB setup in atomic context.\n");
+ die_if_kernel("HugeTSB in atomic", regs);
+ }
+
+ tp = &mm->context.tsb_block[MM_TSB_HUGE];
+ if (likely(tp->tsb == NULL))
+ tsb_grow(mm, MM_TSB_HUGE, 0);
+
tsb_context_switch(mm);
smp_tsb_sync(mm);
diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c
index 3e8fec3..ba6ae7f 100644
--- a/arch/sparc/mm/tlb.c
+++ b/arch/sparc/mm/tlb.c
@@ -135,8 +135,15 @@
mm->context.huge_pte_count++;
else
mm->context.huge_pte_count--;
- if (mm->context.huge_pte_count == 1)
- hugetlb_setup(mm);
+
+ /* Do not try to allocate the TSB hash table if we
+ * don't have one already. We have various locks held
+ * and thus we'll end up doing a GFP_KERNEL allocation
+ * in an atomic context.
+ *
+ * Instead, we let the first TLB miss on a hugepage
+ * take care of this.
+ */
}
if (!pmd_none(orig)) {
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 7f64743..428982b 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -314,7 +314,7 @@
retry_tsb_alloc:
gfp_flags = GFP_KERNEL;
if (new_size > (PAGE_SIZE * 2))
- gfp_flags = __GFP_NOWARN | __GFP_NORETRY;
+ gfp_flags |= __GFP_NOWARN | __GFP_NORETRY;
new_tsb = kmem_cache_alloc_node(tsb_caches[new_cache_index],
gfp_flags, numa_node_id());
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index 62bad9f..872d7e2 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -45,11 +45,6 @@
"UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
};
-/*
- * The idle thread, has rather strange semantics for calling pm_idle,
- * but this is what x86 does and we need to do the same, so that
- * things like cpuidle get called in the same way.
- */
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 225543b..f7a27fd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1,7 +1,7 @@
# Select 32 or 64 bit
config 64BIT
bool "64-bit kernel" if ARCH = "x86"
- default ARCH = "x86_64"
+ default ARCH != "i386"
---help---
Say yes to build a 64-bit kernel - formerly known as x86_64
Say no to build a 32-bit kernel - formerly known as i386
@@ -28,7 +28,6 @@
select HAVE_OPROFILE
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
- select HAVE_IRQ_WORK
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_MEMBLOCK
@@ -40,10 +39,12 @@
select HAVE_DMA_CONTIGUOUS if !SWIOTLB
select HAVE_KRETPROBES
select HAVE_OPTPROBES
+ select HAVE_KPROBES_ON_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FENTRY if X86_64
select HAVE_C_RECORDMCOUNT
select HAVE_DYNAMIC_FTRACE
+ select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_GRAPH_FP_TEST
@@ -106,6 +107,7 @@
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_TIME_VSYSCALL if X86_64
select KTIME_SCALAR if X86_32
+ select ALWAYS_USE_PERSISTENT_CLOCK
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_CONTEXT_TRACKING if X86_64
@@ -114,6 +116,7 @@
select MODULES_USE_ELF_RELA if X86_64
select CLONE_BACKWARDS if X86_32
select GENERIC_SIGALTSTACK
+ select ARCH_USE_BUILTIN_BSWAP
config INSTRUCTION_DECODER
def_bool y
@@ -320,6 +323,10 @@
---help---
This option is needed for the systems that have more than 8 CPUs
+config GOLDFISH
+ def_bool y
+ depends on X86_GOLDFISH
+
if X86_32
config X86_EXTENDED_PLATFORM
bool "Support for extended (non-PC) x86 platforms"
@@ -402,6 +409,14 @@
# Following is an alphabetically sorted list of 32 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
+config X86_GOLDFISH
+ bool "Goldfish (Virtual Platform)"
+ depends on X86_32
+ ---help---
+ Enable support for the Goldfish virtual platform used primarily
+ for Android development. Unless you are building for the Android
+ Goldfish emulator say N here.
+
config X86_INTEL_CE
bool "CE4100 TV platform"
depends on PCI
@@ -454,6 +469,16 @@
endif
+config X86_INTEL_LPSS
+ bool "Intel Low Power Subsystem Support"
+ depends on ACPI
+ select COMMON_CLK
+ ---help---
+ Select to build support for Intel Low Power Subsystem such as
+ found on Intel Lynxpoint PCH. Selecting this option enables
+ things like clock tree (common clock framework) which are needed
+ by the LPSS peripheral drivers.
+
config X86_RDC321X
bool "RDC R-321x SoC"
depends on X86_32
@@ -1912,6 +1937,7 @@
this feature.
config APM_CPU_IDLE
+ depends on CPU_IDLE
bool "Make CPU Idle calls when idle"
---help---
Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
@@ -2188,6 +2214,15 @@
---help---
This option enables system support for the Traverse Technologies GEOS.
+config TS5500
+ bool "Technologic Systems TS-5500 platform support"
+ depends on MELAN
+ select CHECK_SIGNATURE
+ select NEW_LEDS
+ select LEDS_CLASS
+ ---help---
+ This option enables system support for the Technologic Systems TS-5500.
+
endif # X86_32
config AMD_NB
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index e71fc42..5c47726 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -2,7 +2,11 @@
# select defconfig based on actual architecture
ifeq ($(ARCH),x86)
+ ifeq ($(shell uname -m),x86_64)
+ KBUILD_DEFCONFIG := x86_64_defconfig
+ else
KBUILD_DEFCONFIG := i386_defconfig
+ endif
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 88f7ff6..7cb56c6 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -325,6 +325,8 @@
{
real_mode = rmode;
+ sanitize_boot_params(real_mode);
+
if (real_mode->screen_info.orig_video_mode == 7) {
vidmem = (char *) 0xb0000;
vidport = 0x3b4;
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index 0e6dc0e..674019d 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -18,6 +18,7 @@
#include <asm/page.h>
#include <asm/boot.h>
#include <asm/bootparam.h>
+#include <asm/bootparam_utils.h>
#define BOOT_BOOT_H
#include "../ctype.h"
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 5598547..9444708 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,3 +1,4 @@
+# CONFIG_64BIT is not set
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 0c44630..b31bf97 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -49,10 +49,6 @@
/* Asm macros */
-#define ACPI_ASM_MACROS
-#define BREAKPOINT3
-#define ACPI_DISABLE_IRQS() local_irq_disable()
-#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
int __acpi_acquire_global_lock(unsigned int *lock);
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index b3341e9..a54ee1d 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -81,6 +81,23 @@
return (node < amd_northbridges.num) ? &amd_northbridges.nb[node] : NULL;
}
+static inline u16 amd_get_node_id(struct pci_dev *pdev)
+{
+ struct pci_dev *misc;
+ int i;
+
+ for (i = 0; i != amd_nb_num(); i++) {
+ misc = node_to_amd_nb(i)->misc;
+
+ if (pci_domain_nr(misc->bus) == pci_domain_nr(pdev->bus) &&
+ PCI_SLOT(misc->devfn) == PCI_SLOT(pdev->devfn))
+ return i;
+ }
+
+ WARN(1, "Unable to find AMD Northbridge id for %s\n", pci_name(pdev));
+ return 0;
+}
+
#else
#define amd_nb_num(x) 0
diff --git a/arch/x86/include/asm/bootparam_utils.h b/arch/x86/include/asm/bootparam_utils.h
new file mode 100644
index 0000000..5b5e9cb
--- /dev/null
+++ b/arch/x86/include/asm/bootparam_utils.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_X86_BOOTPARAM_UTILS_H
+#define _ASM_X86_BOOTPARAM_UTILS_H
+
+#include <asm/bootparam.h>
+
+/*
+ * This file is included from multiple environments. Do not
+ * add completing #includes to make it standalone.
+ */
+
+/*
+ * Deal with bootloaders which fail to initialize unknown fields in
+ * boot_params to zero. The list fields in this list are taken from
+ * analysis of kexec-tools; if other broken bootloaders initialize a
+ * different set of fields we will need to figure out how to disambiguate.
+ *
+ */
+static void sanitize_boot_params(struct boot_params *boot_params)
+{
+ if (boot_params->sentinel) {
+ /*fields in boot_params are not valid, clear them */
+ memset(&boot_params->olpc_ofw_header, 0,
+ (char *)&boot_params->alt_mem_k -
+ (char *)&boot_params->olpc_ofw_header);
+ memset(&boot_params->kbd_status, 0,
+ (char *)&boot_params->hdr -
+ (char *)&boot_params->kbd_status);
+ memset(&boot_params->_pad7[0], 0,
+ (char *)&boot_params->edd_mbr_sig_buffer[0] -
+ (char *)&boot_params->_pad7[0]);
+ memset(&boot_params->_pad8[0], 0,
+ (char *)&boot_params->eddbuf[0] -
+ (char *)&boot_params->_pad8[0]);
+ memset(&boot_params->_pad9[0], 0, sizeof(boot_params->_pad9));
+ }
+}
+
+#endif /* _ASM_X86_BOOTPARAM_UTILS_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 2d9075e..93fe929 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -167,6 +167,7 @@
#define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */
#define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */
#define X86_FEATURE_PERFCTR_CORE (6*32+23) /* core performance counter extensions */
+#define X86_FEATURE_PERFCTR_NB (6*32+24) /* NB performance counter extensions */
/*
* Auxiliary flags: Linux defined - For features scattered in various
@@ -309,6 +310,7 @@
#define cpu_has_hypervisor boot_cpu_has(X86_FEATURE_HYPERVISOR)
#define cpu_has_pclmulqdq boot_cpu_has(X86_FEATURE_PCLMULQDQ)
#define cpu_has_perfctr_core boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
+#define cpu_has_perfctr_nb boot_cpu_has(X86_FEATURE_PERFCTR_NB)
#define cpu_has_cx8 boot_cpu_has(X86_FEATURE_CX8)
#define cpu_has_cx16 boot_cpu_has(X86_FEATURE_CX16)
#define cpu_has_eager_fpu boot_cpu_has(X86_FEATURE_EAGER_FPU)
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 9a25b52..86cb51e 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -44,7 +44,6 @@
#ifdef CONFIG_DYNAMIC_FTRACE
#define ARCH_SUPPORTS_FTRACE_OPS 1
-#define ARCH_SUPPORTS_FTRACE_SAVE_REGS
#endif
#ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 434e210..b18df57 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -80,9 +80,9 @@
extern void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg);
#ifdef CONFIG_PCI_MSI
-extern int arch_setup_hpet_msi(unsigned int irq, unsigned int id);
+extern int default_setup_hpet_msi(unsigned int irq, unsigned int id);
#else
-static inline int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
+static inline int default_setup_hpet_msi(unsigned int irq, unsigned int id)
{
return -EINVAL;
}
@@ -111,6 +111,7 @@
static inline int hpet_enable(void) { return 0; }
static inline int is_hpet_enabled(void) { return 0; }
#define hpet_readl(a) 0
+#define default_setup_hpet_msi NULL
#endif
#endif /* _ASM_X86_HPET_H */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index eb92a6e..10a78c3 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -101,6 +101,7 @@
irq_attr->polarity = polarity;
}
+/* Intel specific interrupt remapping information */
struct irq_2_iommu {
struct intel_iommu *iommu;
u16 irte_index;
@@ -108,6 +109,12 @@
u8 irte_mask;
};
+/* AMD specific interrupt remapping information */
+struct irq_2_irte {
+ u16 devid; /* Device ID for IRTE table */
+ u16 index; /* Index into IRTE table*/
+};
+
/*
* This is performance-critical, we want to do it O(1)
*
@@ -120,7 +127,11 @@
u8 vector;
u8 move_in_progress : 1;
#ifdef CONFIG_IRQ_REMAP
- struct irq_2_iommu irq_2_iommu;
+ u8 remapped : 1;
+ union {
+ struct irq_2_iommu irq_2_iommu;
+ struct irq_2_irte irq_2_irte;
+ };
#endif
};
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index b518c75..86095ed 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -25,6 +25,7 @@
extern void init_hypervisor(struct cpuinfo_x86 *c);
extern void init_hypervisor_platform(void);
+extern bool hypervisor_x2apic_available(void);
/*
* x86 hypervisor information
@@ -41,6 +42,9 @@
/* Platform setup (run once per boot) */
void (*init_platform)(void);
+
+ /* X2APIC detection (run once per boot) */
+ bool (*x2apic_available)(void);
};
extern const struct hypervisor_x86 *x86_hyper;
@@ -51,13 +55,4 @@
extern const struct hypervisor_x86 x86_hyper_xen_hvm;
extern const struct hypervisor_x86 x86_hyper_kvm;
-static inline bool hypervisor_x2apic_available(void)
-{
- if (kvm_para_available())
- return true;
- if (xen_x2apic_para_available())
- return true;
- return false;
-}
-
#endif
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 73d8c53..459e50a 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -144,11 +144,24 @@
(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
struct io_apic_irq_attr;
+struct irq_cfg;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
void setup_IO_APIC_irq_extra(u32 gsi);
extern void ioapic_insert_resources(void);
+extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
+ unsigned int, int,
+ struct io_apic_irq_attr *);
+extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
+ unsigned int, int,
+ struct io_apic_irq_attr *);
+extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
+
+extern void native_compose_msi_msg(struct pci_dev *pdev,
+ unsigned int irq, unsigned int dest,
+ struct msi_msg *msg, u8 hpet_id);
+extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
extern int save_ioapic_entries(void);
@@ -179,6 +192,12 @@
extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);
extern void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int val);
extern void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val);
+extern void native_disable_io_apic(void);
+extern void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries);
+extern void intel_ir_io_apic_print_entries(unsigned int apic, unsigned int nr_entries);
+extern int native_ioapic_set_affinity(struct irq_data *,
+ const struct cpumask *,
+ bool);
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
@@ -193,6 +212,9 @@
{
x86_io_apic_ops.modify(apic, reg, value);
}
+
+extern void io_apic_eoi(unsigned int apic, unsigned int vector);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
@@ -223,6 +245,12 @@
#define native_io_apic_read NULL
#define native_io_apic_write NULL
#define native_io_apic_modify NULL
+#define native_disable_io_apic NULL
+#define native_io_apic_print_entries NULL
+#define native_ioapic_set_affinity NULL
+#define native_setup_ioapic_entry NULL
+#define native_compose_msi_msg NULL
+#define native_eoi_ioapic_pin NULL
#endif
#endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 5fb9bbbd..95fd352 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -26,8 +26,6 @@
#ifdef CONFIG_IRQ_REMAP
-extern int irq_remapping_enabled;
-
extern void setup_irq_remapping_ops(void);
extern int irq_remapping_supported(void);
extern int irq_remapping_prepare(void);
@@ -40,22 +38,20 @@
unsigned int destination,
int vector,
struct io_apic_irq_attr *attr);
-extern int set_remapped_irq_affinity(struct irq_data *data,
- const struct cpumask *mask,
- bool force);
extern void free_remapped_irq(int irq);
extern void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id);
-extern int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
-extern int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle);
extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
+extern void panic_if_irq_remap(const char *msg);
+extern bool setup_remapped_irq(int irq,
+ struct irq_cfg *cfg,
+ struct irq_chip *chip);
+
+void irq_remap_modify_chip_defaults(struct irq_chip *chip);
#else /* CONFIG_IRQ_REMAP */
-#define irq_remapping_enabled 0
-
static inline void setup_irq_remapping_ops(void) { }
static inline int irq_remapping_supported(void) { return 0; }
static inline int irq_remapping_prepare(void) { return -ENODEV; }
@@ -71,31 +67,31 @@
{
return -ENODEV;
}
-static inline int set_remapped_irq_affinity(struct irq_data *data,
- const struct cpumask *mask,
- bool force)
-{
- return 0;
-}
static inline void free_remapped_irq(int irq) { }
static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id)
{
}
-static inline int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
-{
- return -ENODEV;
-}
-static inline int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
-{
- return -ENODEV;
-}
static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
{
return -ENODEV;
}
+
+static inline void panic_if_irq_remap(const char *msg)
+{
+}
+
+static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+}
+
+static inline bool setup_remapped_irq(int irq,
+ struct irq_cfg *cfg,
+ struct irq_chip *chip)
+{
+ return false;
+}
#endif /* CONFIG_IRQ_REMAP */
#endif /* __X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 1508e51..aac5fa6 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -109,8 +109,8 @@
#define UV_BAU_MESSAGE 0xf5
-/* Xen vector callback to receive events in a HVM domain */
-#define XEN_HVM_EVTCHN_CALLBACK 0xf3
+/* Vector on which hypervisor callbacks will be delivered */
+#define HYPERVISOR_CALLBACK_VECTOR 0xf3
/*
* Local APIC timer IRQ vector is on a different priority level,
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index 5ed1f161..65231e1 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -85,13 +85,13 @@
return ret;
}
-static inline int kvm_para_available(void)
+static inline bool kvm_para_available(void)
{
unsigned int eax, ebx, ecx, edx;
char signature[13];
if (boot_cpu_data.cpuid_level < 0)
- return 0; /* So we don't blow up on old processors */
+ return false; /* So we don't blow up on old processors */
if (cpu_has_hypervisor) {
cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
@@ -101,10 +101,10 @@
signature[12] = 0;
if (strcmp(signature, "KVMKVMKVM") == 0)
- return 1;
+ return true;
}
- return 0;
+ return false;
}
static inline unsigned int kvm_arch_para_features(void)
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index 4814297..79327e9 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -27,20 +27,20 @@
#define __asmlinkage_protect0(ret) \
__asmlinkage_protect_n(ret)
#define __asmlinkage_protect1(ret, arg1) \
- __asmlinkage_protect_n(ret, "g" (arg1))
+ __asmlinkage_protect_n(ret, "m" (arg1))
#define __asmlinkage_protect2(ret, arg1, arg2) \
- __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+ __asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
- __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+ __asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
- __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
- "g" (arg4))
+ __asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+ "m" (arg4))
#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
- __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
- "g" (arg4), "g" (arg5))
+ __asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+ "m" (arg4), "m" (arg5))
#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
- __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
- "g" (arg4), "g" (arg5), "g" (arg6))
+ __asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+ "m" (arg4), "m" (arg5), "m" (arg6))
#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 79ce568..c2934be 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -11,4 +11,8 @@
extern struct ms_hyperv_info ms_hyperv;
+void hyperv_callback_vector(void);
+void hyperv_vector_handler(struct pt_regs *regs);
+void hv_register_vmbus_handler(int irq, irq_handler_t handler);
+
#endif
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index bcdff99..2f366d0 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -4,7 +4,8 @@
#define MWAIT_SUBSTATE_MASK 0xf
#define MWAIT_CSTATE_MASK 0xf
#define MWAIT_SUBSTATE_SIZE 4
-#define MWAIT_MAX_NUM_CSTATES 8
+#define MWAIT_HINT2CSTATE(hint) (((hint) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK)
+#define MWAIT_HINT2SUBSTATE(hint) ((hint) & MWAIT_CSTATE_MASK)
#define CPUID_MWAIT_LEAF 5
#define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index dba7805..c28fd02 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -121,9 +121,12 @@
#define arch_teardown_msi_irq x86_teardown_msi_irq
#define arch_restore_msi_irqs x86_restore_msi_irqs
/* implemented in arch/x86/kernel/apic/io_apic. */
+struct msi_desc;
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void native_teardown_msi_irq(unsigned int irq);
void native_restore_msi_irqs(struct pci_dev *dev, int irq);
+int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
+ unsigned int irq_base, unsigned int irq_offset);
/* default to the implementation in drivers/lib/msi.c */
#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS
#define HAVE_DEFAULT_MSI_RESTORE_IRQS
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 4fabcdf..57cb634 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -29,8 +29,13 @@
#define ARCH_PERFMON_EVENTSEL_INV (1ULL << 23)
#define ARCH_PERFMON_EVENTSEL_CMASK 0xFF000000ULL
-#define AMD_PERFMON_EVENTSEL_GUESTONLY (1ULL << 40)
-#define AMD_PERFMON_EVENTSEL_HOSTONLY (1ULL << 41)
+#define AMD64_EVENTSEL_INT_CORE_ENABLE (1ULL << 36)
+#define AMD64_EVENTSEL_GUESTONLY (1ULL << 40)
+#define AMD64_EVENTSEL_HOSTONLY (1ULL << 41)
+
+#define AMD64_EVENTSEL_INT_CORE_SEL_SHIFT 37
+#define AMD64_EVENTSEL_INT_CORE_SEL_MASK \
+ (0xFULL << AMD64_EVENTSEL_INT_CORE_SEL_SHIFT)
#define AMD64_EVENTSEL_EVENT \
(ARCH_PERFMON_EVENTSEL_EVENT | (0x0FULL << 32))
@@ -46,8 +51,12 @@
#define AMD64_RAW_EVENT_MASK \
(X86_RAW_EVENT_MASK | \
AMD64_EVENTSEL_EVENT)
+#define AMD64_RAW_EVENT_MASK_NB \
+ (AMD64_EVENTSEL_EVENT | \
+ ARCH_PERFMON_EVENTSEL_UMASK)
#define AMD64_NUM_COUNTERS 4
#define AMD64_NUM_COUNTERS_CORE 6
+#define AMD64_NUM_COUNTERS_NB 4
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 1c1a955..fc30427 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -786,6 +786,18 @@
memcpy(dst, src, count * sizeof(pgd_t));
}
+/*
+ * The x86 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+}
+static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
+ unsigned long addr, pmd_t *pmd)
+{
+}
#include <asm-generic/pgtable.h>
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 8faa215..9ee3221 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -66,13 +66,6 @@
__flush_tlb_one((vaddr)); \
} while (0)
-/*
- * The i386 doesn't have any external MMU info: the kernel page
- * tables contain all the necessary information.
- */
-#define update_mmu_cache(vma, address, ptep) do { } while (0)
-#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
-
#endif /* !__ASSEMBLY__ */
/*
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 47356f9..615b0c7 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -142,9 +142,6 @@
#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
#define pte_unmap(pte) ((void)(pte))/* NOP */
-#define update_mmu_cache(vma, address, ptep) do { } while (0)
-#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
-
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 888184b..d172588 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -89,7 +89,6 @@
char wp_works_ok; /* It doesn't on 386's */
/* Problems on some 486Dx4's and old 386's: */
- char hlt_works_ok;
char hard_math;
char rfu;
char fdiv_bug;
@@ -165,15 +164,6 @@
extern const struct seq_operations cpuinfo_op;
-static inline int hlt_works(int cpu)
-{
-#ifdef CONFIG_X86_32
- return cpu_data(cpu).hlt_works_ok;
-#else
- return 1;
-#endif
-}
-
#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
extern void cpu_detect(struct cpuinfo_x86 *c);
@@ -725,7 +715,7 @@
extern bool amd_e400_c1e_detected;
enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_NOMWAIT,
- IDLE_POLL, IDLE_FORCE_MWAIT};
+ IDLE_POLL};
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
@@ -943,7 +933,7 @@
extern int get_tsc_mode(unsigned long adr);
extern int set_tsc_mode(unsigned int val);
-extern int amd_get_nb_id(int cpu);
+extern u16 amd_get_nb_id(int cpu);
struct aperfmperf {
u64 aperf, mperf;
@@ -998,7 +988,11 @@
extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
void default_idle(void);
-bool set_pm_idle_to_default(void);
+#ifdef CONFIG_XEN
+bool xen_set_default_idle(void);
+#else
+#define xen_set_default_idle 0
+#endif
void stop_this_cpu(void *dummy);
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index 6c7fc25..5c6e4fb 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -47,6 +47,12 @@
# define NEED_NOPL 0
#endif
+#ifdef CONFIG_MATOM
+# define NEED_MOVBE (1<<(X86_FEATURE_MOVBE & 31))
+#else
+# define NEED_MOVBE 0
+#endif
+
#ifdef CONFIG_X86_64
#ifdef CONFIG_PARAVIRT
/* Paravirtualized systems may not have PSE or PGE available */
@@ -80,7 +86,7 @@
#define REQUIRED_MASK2 0
#define REQUIRED_MASK3 (NEED_NOPL)
-#define REQUIRED_MASK4 0
+#define REQUIRED_MASK4 (NEED_MOVBE)
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
#define REQUIRED_MASK7 0
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 21f7385..2c32df9 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -5,7 +5,7 @@
*
* SGI UV architectural definitions
*
- * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_HUB_H
@@ -175,6 +175,7 @@
*/
#define UV1_HUB_REVISION_BASE 1
#define UV2_HUB_REVISION_BASE 3
+#define UV3_HUB_REVISION_BASE 5
static inline int is_uv1_hub(void)
{
@@ -183,6 +184,23 @@
static inline int is_uv2_hub(void)
{
+ return ((uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE) &&
+ (uv_hub_info->hub_revision < UV3_HUB_REVISION_BASE));
+}
+
+static inline int is_uv3_hub(void)
+{
+ return uv_hub_info->hub_revision >= UV3_HUB_REVISION_BASE;
+}
+
+static inline int is_uv_hub(void)
+{
+ return uv_hub_info->hub_revision;
+}
+
+/* code common to uv2 and uv3 only */
+static inline int is_uvx_hub(void)
+{
return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE;
}
@@ -230,14 +248,23 @@
#define UV2_LOCAL_MMR_SIZE (32UL * 1024 * 1024)
#define UV2_GLOBAL_MMR32_SIZE (32UL * 1024 * 1024)
-#define UV_LOCAL_MMR_BASE (is_uv1_hub() ? UV1_LOCAL_MMR_BASE \
- : UV2_LOCAL_MMR_BASE)
-#define UV_GLOBAL_MMR32_BASE (is_uv1_hub() ? UV1_GLOBAL_MMR32_BASE \
- : UV2_GLOBAL_MMR32_BASE)
-#define UV_LOCAL_MMR_SIZE (is_uv1_hub() ? UV1_LOCAL_MMR_SIZE : \
- UV2_LOCAL_MMR_SIZE)
+#define UV3_LOCAL_MMR_BASE 0xfa000000UL
+#define UV3_GLOBAL_MMR32_BASE 0xfc000000UL
+#define UV3_LOCAL_MMR_SIZE (32UL * 1024 * 1024)
+#define UV3_GLOBAL_MMR32_SIZE (32UL * 1024 * 1024)
+
+#define UV_LOCAL_MMR_BASE (is_uv1_hub() ? UV1_LOCAL_MMR_BASE : \
+ (is_uv2_hub() ? UV2_LOCAL_MMR_BASE : \
+ UV3_LOCAL_MMR_BASE))
+#define UV_GLOBAL_MMR32_BASE (is_uv1_hub() ? UV1_GLOBAL_MMR32_BASE :\
+ (is_uv2_hub() ? UV2_GLOBAL_MMR32_BASE :\
+ UV3_GLOBAL_MMR32_BASE))
+#define UV_LOCAL_MMR_SIZE (is_uv1_hub() ? UV1_LOCAL_MMR_SIZE : \
+ (is_uv2_hub() ? UV2_LOCAL_MMR_SIZE : \
+ UV3_LOCAL_MMR_SIZE))
#define UV_GLOBAL_MMR32_SIZE (is_uv1_hub() ? UV1_GLOBAL_MMR32_SIZE :\
- UV2_GLOBAL_MMR32_SIZE)
+ (is_uv2_hub() ? UV2_GLOBAL_MMR32_SIZE :\
+ UV3_GLOBAL_MMR32_SIZE))
#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base)
#define UV_GLOBAL_GRU_MMR_BASE 0x4000000
@@ -599,6 +626,7 @@
* 1 - UV1 rev 1.0 initial silicon
* 2 - UV1 rev 2.0 production silicon
* 3 - UV2 rev 1.0 initial silicon
+ * 5 - UV3 rev 1.0 initial silicon
*/
static inline int uv_get_min_hub_revision_id(void)
{
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index cf1d736..bd5f80e 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,16 +5,25 @@
*
* SGI UV MMR definitions
*
- * Copyright (C) 2007-2011 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_MMRS_H
#define _ASM_X86_UV_UV_MMRS_H
/*
- * This file contains MMR definitions for both UV1 & UV2 hubs.
+ * This file contains MMR definitions for all UV hubs types.
*
- * In general, MMR addresses and structures are identical on both hubs.
+ * To minimize coding differences between hub types, the symbols are
+ * grouped by architecture types.
+ *
+ * UVH - definitions common to all UV hub types.
+ * UVXH - definitions common to all UV eXtended hub types (currently 2 & 3).
+ * UV1H - definitions specific to UV type 1 hub.
+ * UV2H - definitions specific to UV type 2 hub.
+ * UV3H - definitions specific to UV type 3 hub.
+ *
+ * So in general, MMR addresses and structures are identical on all hubs types.
* These MMRs are identified as:
* #define UVH_xxx <address>
* union uvh_xxx {
@@ -23,24 +32,36 @@
* } s;
* };
*
- * If the MMR exists on both hub type but has different addresses or
- * contents, the MMR definition is similar to:
- * #define UV1H_xxx <uv1 address>
- * #define UV2H_xxx <uv2address>
- * #define UVH_xxx (is_uv1_hub() ? UV1H_xxx : UV2H_xxx)
+ * If the MMR exists on all hub types but have different addresses:
+ * #define UV1Hxxx a
+ * #define UV2Hxxx b
+ * #define UV3Hxxx c
+ * #define UVHxxx (is_uv1_hub() ? UV1Hxxx :
+ * (is_uv2_hub() ? UV2Hxxx :
+ * UV3Hxxx))
+ *
+ * If the MMR exists on all hub types > 1 but have different addresses:
+ * #define UV2Hxxx b
+ * #define UV3Hxxx c
+ * #define UVXHxxx (is_uv2_hub() ? UV2Hxxx :
+ * UV3Hxxx))
+ *
* union uvh_xxx {
* unsigned long v;
- * struct uv1h_int_cmpd_s { (Common fields only)
+ * struct uvh_xxx_s { # Common fields only
* } s;
- * struct uv1h_int_cmpd_s { (Full UV1 definition)
+ * struct uv1h_xxx_s { # Full UV1 definition (*)
* } s1;
- * struct uv2h_int_cmpd_s { (Full UV2 definition)
+ * struct uv2h_xxx_s { # Full UV2 definition (*)
* } s2;
+ * struct uv3h_xxx_s { # Full UV3 definition (*)
+ * } s3;
* };
+ * (* - if present and different than the common struct)
*
- * Only essential difference are enumerated. For example, if the address is
- * the same for both UV1 & UV2, only a single #define is generated. Likewise,
- * if the contents is the same for both hubs, only the "s" structure is
+ * Only essential differences are enumerated. For example, if the address is
+ * the same for all UV's, only a single #define is generated. Likewise,
+ * if the contents is the same for all hubs, only the "s" structure is
* generated.
*
* If the MMR exists on ONLY 1 type of hub, no generic definition is
@@ -51,6 +72,8 @@
* struct uvh_int_cmpd_s {
* } sn;
* };
+ *
+ * (GEN Flags: mflags_opt= undefs=0 UV23=UVXH)
*/
#define UV_MMR_ENABLE (1UL << 63)
@@ -58,15 +81,18 @@
#define UV1_HUB_PART_NUMBER 0x88a5
#define UV2_HUB_PART_NUMBER 0x8eb8
#define UV2_HUB_PART_NUMBER_X 0x1111
+#define UV3_HUB_PART_NUMBER 0x9578
+#define UV3_HUB_PART_NUMBER_X 0x4321
-/* Compat: if this #define is present, UV headers support UV2 */
+/* Compat: Indicate which UV Hubs are supported. */
#define UV2_HUB_IS_SUPPORTED 1
+#define UV3_HUB_IS_SUPPORTED 1
/* ========================================================================= */
/* UVH_BAU_DATA_BROADCAST */
/* ========================================================================= */
-#define UVH_BAU_DATA_BROADCAST 0x61688UL
-#define UVH_BAU_DATA_BROADCAST_32 0x440
+#define UVH_BAU_DATA_BROADCAST 0x61688UL
+#define UVH_BAU_DATA_BROADCAST_32 0x440
#define UVH_BAU_DATA_BROADCAST_ENABLE_SHFT 0
#define UVH_BAU_DATA_BROADCAST_ENABLE_MASK 0x0000000000000001UL
@@ -82,8 +108,8 @@
/* ========================================================================= */
/* UVH_BAU_DATA_CONFIG */
/* ========================================================================= */
-#define UVH_BAU_DATA_CONFIG 0x61680UL
-#define UVH_BAU_DATA_CONFIG_32 0x438
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x438
#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
@@ -121,10 +147,14 @@
/* ========================================================================= */
/* UVH_EVENT_OCCURRED0 */
/* ========================================================================= */
-#define UVH_EVENT_OCCURRED0 0x70000UL
-#define UVH_EVENT_OCCURRED0_32 0x5e8
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x5e8
-#define UV1H_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+
#define UV1H_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
#define UV1H_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
#define UV1H_EVENT_OCCURRED0_LH_HCERR_SHFT 3
@@ -135,7 +165,6 @@
#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
#define UV1H_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
-#define UV1H_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
#define UV1H_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
#define UV1H_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
#define UV1H_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
@@ -181,7 +210,6 @@
#define UV1H_EVENT_OCCURRED0_RTC3_SHFT 54
#define UV1H_EVENT_OCCURRED0_BAU_DATA_SHFT 55
#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
-#define UV1H_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
#define UV1H_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
#define UV1H_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
#define UV1H_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
@@ -192,7 +220,6 @@
#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
#define UV1H_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
-#define UV1H_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
#define UV1H_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
#define UV1H_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
#define UV1H_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
@@ -239,188 +266,130 @@
#define UV1H_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_HCERR_SHFT 0
-#define UV2H_EVENT_OCCURRED0_QP_HCERR_SHFT 1
-#define UV2H_EVENT_OCCURRED0_RH_HCERR_SHFT 2
-#define UV2H_EVENT_OCCURRED0_LH0_HCERR_SHFT 3
-#define UV2H_EVENT_OCCURRED0_LH1_HCERR_SHFT 4
-#define UV2H_EVENT_OCCURRED0_GR0_HCERR_SHFT 5
-#define UV2H_EVENT_OCCURRED0_GR1_HCERR_SHFT 6
-#define UV2H_EVENT_OCCURRED0_NI0_HCERR_SHFT 7
-#define UV2H_EVENT_OCCURRED0_NI1_HCERR_SHFT 8
-#define UV2H_EVENT_OCCURRED0_LB_AOERR0_SHFT 9
-#define UV2H_EVENT_OCCURRED0_QP_AOERR0_SHFT 10
-#define UV2H_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
-#define UV2H_EVENT_OCCURRED0_LH0_AOERR0_SHFT 12
-#define UV2H_EVENT_OCCURRED0_LH1_AOERR0_SHFT 13
-#define UV2H_EVENT_OCCURRED0_GR0_AOERR0_SHFT 14
-#define UV2H_EVENT_OCCURRED0_GR1_AOERR0_SHFT 15
-#define UV2H_EVENT_OCCURRED0_XB_AOERR0_SHFT 16
-#define UV2H_EVENT_OCCURRED0_RT_AOERR0_SHFT 17
-#define UV2H_EVENT_OCCURRED0_NI0_AOERR0_SHFT 18
-#define UV2H_EVENT_OCCURRED0_NI1_AOERR0_SHFT 19
-#define UV2H_EVENT_OCCURRED0_LB_AOERR1_SHFT 20
-#define UV2H_EVENT_OCCURRED0_QP_AOERR1_SHFT 21
-#define UV2H_EVENT_OCCURRED0_RH_AOERR1_SHFT 22
-#define UV2H_EVENT_OCCURRED0_LH0_AOERR1_SHFT 23
-#define UV2H_EVENT_OCCURRED0_LH1_AOERR1_SHFT 24
-#define UV2H_EVENT_OCCURRED0_GR0_AOERR1_SHFT 25
-#define UV2H_EVENT_OCCURRED0_GR1_AOERR1_SHFT 26
-#define UV2H_EVENT_OCCURRED0_XB_AOERR1_SHFT 27
-#define UV2H_EVENT_OCCURRED0_RT_AOERR1_SHFT 28
-#define UV2H_EVENT_OCCURRED0_NI0_AOERR1_SHFT 29
-#define UV2H_EVENT_OCCURRED0_NI1_AOERR1_SHFT 30
-#define UV2H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 31
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 32
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 33
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 34
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 35
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 36
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 37
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 38
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 39
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 40
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 41
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 42
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 43
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 44
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 45
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 46
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 47
-#define UV2H_EVENT_OCCURRED0_L1_NMI_INT_SHFT 48
-#define UV2H_EVENT_OCCURRED0_STOP_CLOCK_SHFT 49
-#define UV2H_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 50
-#define UV2H_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 51
-#define UV2H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 52
-#define UV2H_EVENT_OCCURRED0_IPI_INT_SHFT 53
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT0_SHFT 54
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT1_SHFT 55
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT2_SHFT 56
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT3_SHFT 57
-#define UV2H_EVENT_OCCURRED0_PROFILE_INT_SHFT 58
-#define UV2H_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
-#define UV2H_EVENT_OCCURRED0_QP_HCERR_MASK 0x0000000000000002UL
-#define UV2H_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000004UL
-#define UV2H_EVENT_OCCURRED0_LH0_HCERR_MASK 0x0000000000000008UL
-#define UV2H_EVENT_OCCURRED0_LH1_HCERR_MASK 0x0000000000000010UL
-#define UV2H_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000020UL
-#define UV2H_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000040UL
-#define UV2H_EVENT_OCCURRED0_NI0_HCERR_MASK 0x0000000000000080UL
-#define UV2H_EVENT_OCCURRED0_NI1_HCERR_MASK 0x0000000000000100UL
-#define UV2H_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000200UL
-#define UV2H_EVENT_OCCURRED0_QP_AOERR0_MASK 0x0000000000000400UL
-#define UV2H_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
-#define UV2H_EVENT_OCCURRED0_LH0_AOERR0_MASK 0x0000000000001000UL
-#define UV2H_EVENT_OCCURRED0_LH1_AOERR0_MASK 0x0000000000002000UL
-#define UV2H_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000004000UL
-#define UV2H_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000008000UL
-#define UV2H_EVENT_OCCURRED0_XB_AOERR0_MASK 0x0000000000010000UL
-#define UV2H_EVENT_OCCURRED0_RT_AOERR0_MASK 0x0000000000020000UL
-#define UV2H_EVENT_OCCURRED0_NI0_AOERR0_MASK 0x0000000000040000UL
-#define UV2H_EVENT_OCCURRED0_NI1_AOERR0_MASK 0x0000000000080000UL
-#define UV2H_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000100000UL
-#define UV2H_EVENT_OCCURRED0_QP_AOERR1_MASK 0x0000000000200000UL
-#define UV2H_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000400000UL
-#define UV2H_EVENT_OCCURRED0_LH0_AOERR1_MASK 0x0000000000800000UL
-#define UV2H_EVENT_OCCURRED0_LH1_AOERR1_MASK 0x0000000001000000UL
-#define UV2H_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000002000000UL
-#define UV2H_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000004000000UL
-#define UV2H_EVENT_OCCURRED0_XB_AOERR1_MASK 0x0000000008000000UL
-#define UV2H_EVENT_OCCURRED0_RT_AOERR1_MASK 0x0000000010000000UL
-#define UV2H_EVENT_OCCURRED0_NI0_AOERR1_MASK 0x0000000020000000UL
-#define UV2H_EVENT_OCCURRED0_NI1_AOERR1_MASK 0x0000000040000000UL
-#define UV2H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000080000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000100000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000200000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000400000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000800000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000001000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000002000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000004000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000008000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000010000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000020000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000040000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000080000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000100000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000200000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000400000000000UL
-#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000800000000000UL
-#define UV2H_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0001000000000000UL
-#define UV2H_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0002000000000000UL
-#define UV2H_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0004000000000000UL
-#define UV2H_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0008000000000000UL
-#define UV2H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0010000000000000UL
-#define UV2H_EVENT_OCCURRED0_IPI_INT_MASK 0x0020000000000000UL
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0040000000000000UL
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0080000000000000UL
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0100000000000000UL
-#define UV2H_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0200000000000000UL
-#define UV2H_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0400000000000000UL
+#define UVXH_EVENT_OCCURRED0_QP_HCERR_SHFT 1
+#define UVXH_EVENT_OCCURRED0_RH_HCERR_SHFT 2
+#define UVXH_EVENT_OCCURRED0_LH0_HCERR_SHFT 3
+#define UVXH_EVENT_OCCURRED0_LH1_HCERR_SHFT 4
+#define UVXH_EVENT_OCCURRED0_GR0_HCERR_SHFT 5
+#define UVXH_EVENT_OCCURRED0_GR1_HCERR_SHFT 6
+#define UVXH_EVENT_OCCURRED0_NI0_HCERR_SHFT 7
+#define UVXH_EVENT_OCCURRED0_NI1_HCERR_SHFT 8
+#define UVXH_EVENT_OCCURRED0_LB_AOERR0_SHFT 9
+#define UVXH_EVENT_OCCURRED0_QP_AOERR0_SHFT 10
+#define UVXH_EVENT_OCCURRED0_LH0_AOERR0_SHFT 12
+#define UVXH_EVENT_OCCURRED0_LH1_AOERR0_SHFT 13
+#define UVXH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 14
+#define UVXH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 15
+#define UVXH_EVENT_OCCURRED0_XB_AOERR0_SHFT 16
+#define UVXH_EVENT_OCCURRED0_RT_AOERR0_SHFT 17
+#define UVXH_EVENT_OCCURRED0_NI0_AOERR0_SHFT 18
+#define UVXH_EVENT_OCCURRED0_NI1_AOERR0_SHFT 19
+#define UVXH_EVENT_OCCURRED0_LB_AOERR1_SHFT 20
+#define UVXH_EVENT_OCCURRED0_QP_AOERR1_SHFT 21
+#define UVXH_EVENT_OCCURRED0_RH_AOERR1_SHFT 22
+#define UVXH_EVENT_OCCURRED0_LH0_AOERR1_SHFT 23
+#define UVXH_EVENT_OCCURRED0_LH1_AOERR1_SHFT 24
+#define UVXH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 25
+#define UVXH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 26
+#define UVXH_EVENT_OCCURRED0_XB_AOERR1_SHFT 27
+#define UVXH_EVENT_OCCURRED0_RT_AOERR1_SHFT 28
+#define UVXH_EVENT_OCCURRED0_NI0_AOERR1_SHFT 29
+#define UVXH_EVENT_OCCURRED0_NI1_AOERR1_SHFT 30
+#define UVXH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 31
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 32
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 33
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 34
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 35
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 36
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 37
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 38
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 39
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 40
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 41
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 42
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 43
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 44
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 45
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 46
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 47
+#define UVXH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 48
+#define UVXH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 49
+#define UVXH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 50
+#define UVXH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 51
+#define UVXH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 52
+#define UVXH_EVENT_OCCURRED0_IPI_INT_SHFT 53
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 54
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 55
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 56
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 57
+#define UVXH_EVENT_OCCURRED0_PROFILE_INT_SHFT 58
+#define UVXH_EVENT_OCCURRED0_QP_HCERR_MASK 0x0000000000000002UL
+#define UVXH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000004UL
+#define UVXH_EVENT_OCCURRED0_LH0_HCERR_MASK 0x0000000000000008UL
+#define UVXH_EVENT_OCCURRED0_LH1_HCERR_MASK 0x0000000000000010UL
+#define UVXH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000020UL
+#define UVXH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000040UL
+#define UVXH_EVENT_OCCURRED0_NI0_HCERR_MASK 0x0000000000000080UL
+#define UVXH_EVENT_OCCURRED0_NI1_HCERR_MASK 0x0000000000000100UL
+#define UVXH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000200UL
+#define UVXH_EVENT_OCCURRED0_QP_AOERR0_MASK 0x0000000000000400UL
+#define UVXH_EVENT_OCCURRED0_LH0_AOERR0_MASK 0x0000000000001000UL
+#define UVXH_EVENT_OCCURRED0_LH1_AOERR0_MASK 0x0000000000002000UL
+#define UVXH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000004000UL
+#define UVXH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000008000UL
+#define UVXH_EVENT_OCCURRED0_XB_AOERR0_MASK 0x0000000000010000UL
+#define UVXH_EVENT_OCCURRED0_RT_AOERR0_MASK 0x0000000000020000UL
+#define UVXH_EVENT_OCCURRED0_NI0_AOERR0_MASK 0x0000000000040000UL
+#define UVXH_EVENT_OCCURRED0_NI1_AOERR0_MASK 0x0000000000080000UL
+#define UVXH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000100000UL
+#define UVXH_EVENT_OCCURRED0_QP_AOERR1_MASK 0x0000000000200000UL
+#define UVXH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000400000UL
+#define UVXH_EVENT_OCCURRED0_LH0_AOERR1_MASK 0x0000000000800000UL
+#define UVXH_EVENT_OCCURRED0_LH1_AOERR1_MASK 0x0000000001000000UL
+#define UVXH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000002000000UL
+#define UVXH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000004000000UL
+#define UVXH_EVENT_OCCURRED0_XB_AOERR1_MASK 0x0000000008000000UL
+#define UVXH_EVENT_OCCURRED0_RT_AOERR1_MASK 0x0000000010000000UL
+#define UVXH_EVENT_OCCURRED0_NI0_AOERR1_MASK 0x0000000020000000UL
+#define UVXH_EVENT_OCCURRED0_NI1_AOERR1_MASK 0x0000000040000000UL
+#define UVXH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000080000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000100000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000200000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000400000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000800000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000001000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000002000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000004000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000008000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000010000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000020000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000040000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000080000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000100000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000200000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000400000000000UL
+#define UVXH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000800000000000UL
+#define UVXH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0001000000000000UL
+#define UVXH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0002000000000000UL
+#define UVXH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0004000000000000UL
+#define UVXH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0008000000000000UL
+#define UVXH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0010000000000000UL
+#define UVXH_EVENT_OCCURRED0_IPI_INT_MASK 0x0020000000000000UL
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0040000000000000UL
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0080000000000000UL
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0100000000000000UL
+#define UVXH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0200000000000000UL
+#define UVXH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0400000000000000UL
union uvh_event_occurred0_u {
unsigned long v;
- struct uv1h_event_occurred0_s {
+ struct uvh_event_occurred0_s {
unsigned long lb_hcerr:1; /* RW, W1C */
- unsigned long gr0_hcerr:1; /* RW, W1C */
- unsigned long gr1_hcerr:1; /* RW, W1C */
- unsigned long lh_hcerr:1; /* RW, W1C */
- unsigned long rh_hcerr:1; /* RW, W1C */
- unsigned long xn_hcerr:1; /* RW, W1C */
- unsigned long si_hcerr:1; /* RW, W1C */
- unsigned long lb_aoerr0:1; /* RW, W1C */
- unsigned long gr0_aoerr0:1; /* RW, W1C */
- unsigned long gr1_aoerr0:1; /* RW, W1C */
- unsigned long lh_aoerr0:1; /* RW, W1C */
+ unsigned long rsvd_1_10:10;
unsigned long rh_aoerr0:1; /* RW, W1C */
- unsigned long xn_aoerr0:1; /* RW, W1C */
- unsigned long si_aoerr0:1; /* RW, W1C */
- unsigned long lb_aoerr1:1; /* RW, W1C */
- unsigned long gr0_aoerr1:1; /* RW, W1C */
- unsigned long gr1_aoerr1:1; /* RW, W1C */
- unsigned long lh_aoerr1:1; /* RW, W1C */
- unsigned long rh_aoerr1:1; /* RW, W1C */
- unsigned long xn_aoerr1:1; /* RW, W1C */
- unsigned long si_aoerr1:1; /* RW, W1C */
- unsigned long rh_vpi_int:1; /* RW, W1C */
- unsigned long system_shutdown_int:1; /* RW, W1C */
- unsigned long lb_irq_int_0:1; /* RW, W1C */
- unsigned long lb_irq_int_1:1; /* RW, W1C */
- unsigned long lb_irq_int_2:1; /* RW, W1C */
- unsigned long lb_irq_int_3:1; /* RW, W1C */
- unsigned long lb_irq_int_4:1; /* RW, W1C */
- unsigned long lb_irq_int_5:1; /* RW, W1C */
- unsigned long lb_irq_int_6:1; /* RW, W1C */
- unsigned long lb_irq_int_7:1; /* RW, W1C */
- unsigned long lb_irq_int_8:1; /* RW, W1C */
- unsigned long lb_irq_int_9:1; /* RW, W1C */
- unsigned long lb_irq_int_10:1; /* RW, W1C */
- unsigned long lb_irq_int_11:1; /* RW, W1C */
- unsigned long lb_irq_int_12:1; /* RW, W1C */
- unsigned long lb_irq_int_13:1; /* RW, W1C */
- unsigned long lb_irq_int_14:1; /* RW, W1C */
- unsigned long lb_irq_int_15:1; /* RW, W1C */
- unsigned long l1_nmi_int:1; /* RW, W1C */
- unsigned long stop_clock:1; /* RW, W1C */
- unsigned long asic_to_l1:1; /* RW, W1C */
- unsigned long l1_to_asic:1; /* RW, W1C */
- unsigned long ltc_int:1; /* RW, W1C */
- unsigned long la_seq_trigger:1; /* RW, W1C */
- unsigned long ipi_int:1; /* RW, W1C */
- unsigned long extio_int0:1; /* RW, W1C */
- unsigned long extio_int1:1; /* RW, W1C */
- unsigned long extio_int2:1; /* RW, W1C */
- unsigned long extio_int3:1; /* RW, W1C */
- unsigned long profile_int:1; /* RW, W1C */
- unsigned long rtc0:1; /* RW, W1C */
- unsigned long rtc1:1; /* RW, W1C */
- unsigned long rtc2:1; /* RW, W1C */
- unsigned long rtc3:1; /* RW, W1C */
- unsigned long bau_data:1; /* RW, W1C */
- unsigned long power_management_req:1; /* RW, W1C */
- unsigned long rsvd_57_63:7;
- } s1;
- struct uv2h_event_occurred0_s {
+ unsigned long rsvd_12_63:52;
+ } s;
+ struct uvxh_event_occurred0_s {
unsigned long lb_hcerr:1; /* RW */
unsigned long qp_hcerr:1; /* RW */
unsigned long rh_hcerr:1; /* RW */
@@ -481,19 +450,20 @@
unsigned long extio_int3:1; /* RW */
unsigned long profile_int:1; /* RW */
unsigned long rsvd_59_63:5;
- } s2;
+ } sx;
};
/* ========================================================================= */
/* UVH_EVENT_OCCURRED0_ALIAS */
/* ========================================================================= */
-#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
-#define UVH_EVENT_OCCURRED0_ALIAS_32 0x5f0
+#define UVH_EVENT_OCCURRED0_ALIAS 0x70008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x5f0
+
/* ========================================================================= */
/* UVH_GR0_TLB_INT0_CONFIG */
/* ========================================================================= */
-#define UVH_GR0_TLB_INT0_CONFIG 0x61b00UL
+#define UVH_GR0_TLB_INT0_CONFIG 0x61b00UL
#define UVH_GR0_TLB_INT0_CONFIG_VECTOR_SHFT 0
#define UVH_GR0_TLB_INT0_CONFIG_DM_SHFT 8
@@ -531,7 +501,7 @@
/* ========================================================================= */
/* UVH_GR0_TLB_INT1_CONFIG */
/* ========================================================================= */
-#define UVH_GR0_TLB_INT1_CONFIG 0x61b40UL
+#define UVH_GR0_TLB_INT1_CONFIG 0x61b40UL
#define UVH_GR0_TLB_INT1_CONFIG_VECTOR_SHFT 0
#define UVH_GR0_TLB_INT1_CONFIG_DM_SHFT 8
@@ -571,9 +541,11 @@
/* ========================================================================= */
#define UV1H_GR0_TLB_MMR_CONTROL 0x401080UL
#define UV2H_GR0_TLB_MMR_CONTROL 0xc01080UL
-#define UVH_GR0_TLB_MMR_CONTROL (is_uv1_hub() ? \
- UV1H_GR0_TLB_MMR_CONTROL : \
- UV2H_GR0_TLB_MMR_CONTROL)
+#define UV3H_GR0_TLB_MMR_CONTROL 0xc01080UL
+#define UVH_GR0_TLB_MMR_CONTROL \
+ (is_uv1_hub() ? UV1H_GR0_TLB_MMR_CONTROL : \
+ (is_uv2_hub() ? UV2H_GR0_TLB_MMR_CONTROL : \
+ UV3H_GR0_TLB_MMR_CONTROL))
#define UVH_GR0_TLB_MMR_CONTROL_INDEX_SHFT 0
#define UVH_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
@@ -611,6 +583,21 @@
#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_MASK 0x0100000000000000UL
#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_MASK 0x1000000000000000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_INDEX_SHFT 0
+#define UVXH_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
+#define UVXH_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT 20
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_WRITE_SHFT 30
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_READ_SHFT 31
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_OP_DONE_SHFT 32
+#define UVXH_GR0_TLB_MMR_CONTROL_INDEX_MASK 0x0000000000000fffUL
+#define UVXH_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK 0x0000000000003000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK 0x0000000000010000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK 0x0000000000100000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_WRITE_MASK 0x0000000040000000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_READ_MASK 0x0000000080000000UL
+#define UVXH_GR0_TLB_MMR_CONTROL_MMR_OP_DONE_MASK 0x0000000100000000UL
+
#define UV2H_GR0_TLB_MMR_CONTROL_INDEX_SHFT 0
#define UV2H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
#define UV2H_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
@@ -630,6 +617,23 @@
#define UV2H_GR0_TLB_MMR_CONTROL_MMR_INJ_CON_MASK 0x0001000000000000UL
#define UV2H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_MASK 0x0010000000000000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_INDEX_SHFT 0
+#define UV3H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
+#define UV3H_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT 20
+#define UV3H_GR0_TLB_MMR_CONTROL_ECC_SEL_SHFT 21
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_WRITE_SHFT 30
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_READ_SHFT 31
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_OP_DONE_SHFT 32
+#define UV3H_GR0_TLB_MMR_CONTROL_INDEX_MASK 0x0000000000000fffUL
+#define UV3H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK 0x0000000000003000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK 0x0000000000010000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK 0x0000000000100000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_ECC_SEL_MASK 0x0000000000200000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_WRITE_MASK 0x0000000040000000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_READ_MASK 0x0000000080000000UL
+#define UV3H_GR0_TLB_MMR_CONTROL_MMR_OP_DONE_MASK 0x0000000100000000UL
+
union uvh_gr0_tlb_mmr_control_u {
unsigned long v;
struct uvh_gr0_tlb_mmr_control_s {
@@ -642,7 +646,9 @@
unsigned long rsvd_21_29:9;
unsigned long mmr_write:1; /* WP */
unsigned long mmr_read:1; /* WP */
- unsigned long rsvd_32_63:32;
+ unsigned long rsvd_32_48:17;
+ unsigned long rsvd_49_51:3;
+ unsigned long rsvd_52_63:12;
} s;
struct uv1h_gr0_tlb_mmr_control_s {
unsigned long index:12; /* RW */
@@ -666,6 +672,23 @@
unsigned long mmr_inj_tlblruv:1; /* RW */
unsigned long rsvd_61_63:3;
} s1;
+ struct uvxh_gr0_tlb_mmr_control_s {
+ unsigned long index:12; /* RW */
+ unsigned long mem_sel:2; /* RW */
+ unsigned long rsvd_14_15:2;
+ unsigned long auto_valid_en:1; /* RW */
+ unsigned long rsvd_17_19:3;
+ unsigned long mmr_hash_index_en:1; /* RW */
+ unsigned long rsvd_21_29:9;
+ unsigned long mmr_write:1; /* WP */
+ unsigned long mmr_read:1; /* WP */
+ unsigned long mmr_op_done:1; /* RW */
+ unsigned long rsvd_33_47:15;
+ unsigned long rsvd_48:1;
+ unsigned long rsvd_49_51:3;
+ unsigned long rsvd_52:1;
+ unsigned long rsvd_53_63:11;
+ } sx;
struct uv2h_gr0_tlb_mmr_control_s {
unsigned long index:12; /* RW */
unsigned long mem_sel:2; /* RW */
@@ -683,6 +706,24 @@
unsigned long mmr_inj_tlbram:1; /* RW */
unsigned long rsvd_53_63:11;
} s2;
+ struct uv3h_gr0_tlb_mmr_control_s {
+ unsigned long index:12; /* RW */
+ unsigned long mem_sel:2; /* RW */
+ unsigned long rsvd_14_15:2;
+ unsigned long auto_valid_en:1; /* RW */
+ unsigned long rsvd_17_19:3;
+ unsigned long mmr_hash_index_en:1; /* RW */
+ unsigned long ecc_sel:1; /* RW */
+ unsigned long rsvd_22_29:8;
+ unsigned long mmr_write:1; /* WP */
+ unsigned long mmr_read:1; /* WP */
+ unsigned long mmr_op_done:1; /* RW */
+ unsigned long rsvd_33_47:15;
+ unsigned long undef_48:1; /* Undefined */
+ unsigned long rsvd_49_51:3;
+ unsigned long undef_52:1; /* Undefined */
+ unsigned long rsvd_53_63:11;
+ } s3;
};
/* ========================================================================= */
@@ -690,9 +731,11 @@
/* ========================================================================= */
#define UV1H_GR0_TLB_MMR_READ_DATA_HI 0x4010a0UL
#define UV2H_GR0_TLB_MMR_READ_DATA_HI 0xc010a0UL
-#define UVH_GR0_TLB_MMR_READ_DATA_HI (is_uv1_hub() ? \
- UV1H_GR0_TLB_MMR_READ_DATA_HI : \
- UV2H_GR0_TLB_MMR_READ_DATA_HI)
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI 0xc010a0UL
+#define UVH_GR0_TLB_MMR_READ_DATA_HI \
+ (is_uv1_hub() ? UV1H_GR0_TLB_MMR_READ_DATA_HI : \
+ (is_uv2_hub() ? UV2H_GR0_TLB_MMR_READ_DATA_HI : \
+ UV3H_GR0_TLB_MMR_READ_DATA_HI))
#define UVH_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
#define UVH_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
@@ -703,6 +746,46 @@
#define UVH_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
#define UVH_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV1H_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UVXH_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV2H_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_AA_EXT_SHFT 45
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_WAY_ECC_SHFT 55
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_AA_EXT_MASK 0x0000200000000000UL
+#define UV3H_GR0_TLB_MMR_READ_DATA_HI_WAY_ECC_MASK 0xff80000000000000UL
+
union uvh_gr0_tlb_mmr_read_data_hi_u {
unsigned long v;
struct uvh_gr0_tlb_mmr_read_data_hi_s {
@@ -712,6 +795,36 @@
unsigned long larger:1; /* RO */
unsigned long rsvd_45_63:19;
} s;
+ struct uv1h_gr0_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } s1;
+ struct uvxh_gr0_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } sx;
+ struct uv2h_gr0_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } s2;
+ struct uv3h_gr0_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long aa_ext:1; /* RO */
+ unsigned long undef_46_54:9; /* Undefined */
+ unsigned long way_ecc:9; /* RO */
+ } s3;
};
/* ========================================================================= */
@@ -719,9 +832,11 @@
/* ========================================================================= */
#define UV1H_GR0_TLB_MMR_READ_DATA_LO 0x4010a8UL
#define UV2H_GR0_TLB_MMR_READ_DATA_LO 0xc010a8UL
-#define UVH_GR0_TLB_MMR_READ_DATA_LO (is_uv1_hub() ? \
- UV1H_GR0_TLB_MMR_READ_DATA_LO : \
- UV2H_GR0_TLB_MMR_READ_DATA_LO)
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO 0xc010a8UL
+#define UVH_GR0_TLB_MMR_READ_DATA_LO \
+ (is_uv1_hub() ? UV1H_GR0_TLB_MMR_READ_DATA_LO : \
+ (is_uv2_hub() ? UV2H_GR0_TLB_MMR_READ_DATA_LO : \
+ UV3H_GR0_TLB_MMR_READ_DATA_LO))
#define UVH_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
#define UVH_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
@@ -730,6 +845,34 @@
#define UVH_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
#define UVH_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UVXH_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV2H_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV3H_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
union uvh_gr0_tlb_mmr_read_data_lo_u {
unsigned long v;
struct uvh_gr0_tlb_mmr_read_data_lo_s {
@@ -737,12 +880,32 @@
unsigned long asid:24; /* RO */
unsigned long valid:1; /* RO */
} s;
+ struct uv1h_gr0_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s1;
+ struct uvxh_gr0_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } sx;
+ struct uv2h_gr0_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s2;
+ struct uv3h_gr0_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s3;
};
/* ========================================================================= */
/* UVH_GR1_TLB_INT0_CONFIG */
/* ========================================================================= */
-#define UVH_GR1_TLB_INT0_CONFIG 0x61f00UL
+#define UVH_GR1_TLB_INT0_CONFIG 0x61f00UL
#define UVH_GR1_TLB_INT0_CONFIG_VECTOR_SHFT 0
#define UVH_GR1_TLB_INT0_CONFIG_DM_SHFT 8
@@ -780,7 +943,7 @@
/* ========================================================================= */
/* UVH_GR1_TLB_INT1_CONFIG */
/* ========================================================================= */
-#define UVH_GR1_TLB_INT1_CONFIG 0x61f40UL
+#define UVH_GR1_TLB_INT1_CONFIG 0x61f40UL
#define UVH_GR1_TLB_INT1_CONFIG_VECTOR_SHFT 0
#define UVH_GR1_TLB_INT1_CONFIG_DM_SHFT 8
@@ -820,9 +983,11 @@
/* ========================================================================= */
#define UV1H_GR1_TLB_MMR_CONTROL 0x801080UL
#define UV2H_GR1_TLB_MMR_CONTROL 0x1001080UL
-#define UVH_GR1_TLB_MMR_CONTROL (is_uv1_hub() ? \
- UV1H_GR1_TLB_MMR_CONTROL : \
- UV2H_GR1_TLB_MMR_CONTROL)
+#define UV3H_GR1_TLB_MMR_CONTROL 0x1001080UL
+#define UVH_GR1_TLB_MMR_CONTROL \
+ (is_uv1_hub() ? UV1H_GR1_TLB_MMR_CONTROL : \
+ (is_uv2_hub() ? UV2H_GR1_TLB_MMR_CONTROL : \
+ UV3H_GR1_TLB_MMR_CONTROL))
#define UVH_GR1_TLB_MMR_CONTROL_INDEX_SHFT 0
#define UVH_GR1_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
@@ -860,6 +1025,21 @@
#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_MASK 0x0100000000000000UL
#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_MASK 0x1000000000000000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_INDEX_SHFT 0
+#define UVXH_GR1_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
+#define UVXH_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT 20
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_WRITE_SHFT 30
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_READ_SHFT 31
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_OP_DONE_SHFT 32
+#define UVXH_GR1_TLB_MMR_CONTROL_INDEX_MASK 0x0000000000000fffUL
+#define UVXH_GR1_TLB_MMR_CONTROL_MEM_SEL_MASK 0x0000000000003000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK 0x0000000000010000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK 0x0000000000100000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_WRITE_MASK 0x0000000040000000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_READ_MASK 0x0000000080000000UL
+#define UVXH_GR1_TLB_MMR_CONTROL_MMR_OP_DONE_MASK 0x0000000100000000UL
+
#define UV2H_GR1_TLB_MMR_CONTROL_INDEX_SHFT 0
#define UV2H_GR1_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
#define UV2H_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
@@ -879,6 +1059,23 @@
#define UV2H_GR1_TLB_MMR_CONTROL_MMR_INJ_CON_MASK 0x0001000000000000UL
#define UV2H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_MASK 0x0010000000000000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_INDEX_SHFT 0
+#define UV3H_GR1_TLB_MMR_CONTROL_MEM_SEL_SHFT 12
+#define UV3H_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT 16
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT 20
+#define UV3H_GR1_TLB_MMR_CONTROL_ECC_SEL_SHFT 21
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_WRITE_SHFT 30
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_READ_SHFT 31
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_OP_DONE_SHFT 32
+#define UV3H_GR1_TLB_MMR_CONTROL_INDEX_MASK 0x0000000000000fffUL
+#define UV3H_GR1_TLB_MMR_CONTROL_MEM_SEL_MASK 0x0000000000003000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK 0x0000000000010000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK 0x0000000000100000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_ECC_SEL_MASK 0x0000000000200000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_WRITE_MASK 0x0000000040000000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_READ_MASK 0x0000000080000000UL
+#define UV3H_GR1_TLB_MMR_CONTROL_MMR_OP_DONE_MASK 0x0000000100000000UL
+
union uvh_gr1_tlb_mmr_control_u {
unsigned long v;
struct uvh_gr1_tlb_mmr_control_s {
@@ -891,7 +1088,9 @@
unsigned long rsvd_21_29:9;
unsigned long mmr_write:1; /* WP */
unsigned long mmr_read:1; /* WP */
- unsigned long rsvd_32_63:32;
+ unsigned long rsvd_32_48:17;
+ unsigned long rsvd_49_51:3;
+ unsigned long rsvd_52_63:12;
} s;
struct uv1h_gr1_tlb_mmr_control_s {
unsigned long index:12; /* RW */
@@ -915,6 +1114,23 @@
unsigned long mmr_inj_tlblruv:1; /* RW */
unsigned long rsvd_61_63:3;
} s1;
+ struct uvxh_gr1_tlb_mmr_control_s {
+ unsigned long index:12; /* RW */
+ unsigned long mem_sel:2; /* RW */
+ unsigned long rsvd_14_15:2;
+ unsigned long auto_valid_en:1; /* RW */
+ unsigned long rsvd_17_19:3;
+ unsigned long mmr_hash_index_en:1; /* RW */
+ unsigned long rsvd_21_29:9;
+ unsigned long mmr_write:1; /* WP */
+ unsigned long mmr_read:1; /* WP */
+ unsigned long mmr_op_done:1; /* RW */
+ unsigned long rsvd_33_47:15;
+ unsigned long rsvd_48:1;
+ unsigned long rsvd_49_51:3;
+ unsigned long rsvd_52:1;
+ unsigned long rsvd_53_63:11;
+ } sx;
struct uv2h_gr1_tlb_mmr_control_s {
unsigned long index:12; /* RW */
unsigned long mem_sel:2; /* RW */
@@ -932,6 +1148,24 @@
unsigned long mmr_inj_tlbram:1; /* RW */
unsigned long rsvd_53_63:11;
} s2;
+ struct uv3h_gr1_tlb_mmr_control_s {
+ unsigned long index:12; /* RW */
+ unsigned long mem_sel:2; /* RW */
+ unsigned long rsvd_14_15:2;
+ unsigned long auto_valid_en:1; /* RW */
+ unsigned long rsvd_17_19:3;
+ unsigned long mmr_hash_index_en:1; /* RW */
+ unsigned long ecc_sel:1; /* RW */
+ unsigned long rsvd_22_29:8;
+ unsigned long mmr_write:1; /* WP */
+ unsigned long mmr_read:1; /* WP */
+ unsigned long mmr_op_done:1; /* RW */
+ unsigned long rsvd_33_47:15;
+ unsigned long undef_48:1; /* Undefined */
+ unsigned long rsvd_49_51:3;
+ unsigned long undef_52:1; /* Undefined */
+ unsigned long rsvd_53_63:11;
+ } s3;
};
/* ========================================================================= */
@@ -939,9 +1173,11 @@
/* ========================================================================= */
#define UV1H_GR1_TLB_MMR_READ_DATA_HI 0x8010a0UL
#define UV2H_GR1_TLB_MMR_READ_DATA_HI 0x10010a0UL
-#define UVH_GR1_TLB_MMR_READ_DATA_HI (is_uv1_hub() ? \
- UV1H_GR1_TLB_MMR_READ_DATA_HI : \
- UV2H_GR1_TLB_MMR_READ_DATA_HI)
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI 0x10010a0UL
+#define UVH_GR1_TLB_MMR_READ_DATA_HI \
+ (is_uv1_hub() ? UV1H_GR1_TLB_MMR_READ_DATA_HI : \
+ (is_uv2_hub() ? UV2H_GR1_TLB_MMR_READ_DATA_HI : \
+ UV3H_GR1_TLB_MMR_READ_DATA_HI))
#define UVH_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
#define UVH_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
@@ -952,6 +1188,46 @@
#define UVH_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
#define UVH_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV1H_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UVXH_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV2H_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT 0
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT 41
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_SHFT 43
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_LARGER_SHFT 44
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_AA_EXT_SHFT 45
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_WAY_ECC_SHFT 55
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_PFN_MASK 0x000001ffffffffffUL
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_GAA_MASK 0x0000060000000000UL
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK 0x0000080000000000UL
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK 0x0000100000000000UL
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_AA_EXT_MASK 0x0000200000000000UL
+#define UV3H_GR1_TLB_MMR_READ_DATA_HI_WAY_ECC_MASK 0xff80000000000000UL
+
union uvh_gr1_tlb_mmr_read_data_hi_u {
unsigned long v;
struct uvh_gr1_tlb_mmr_read_data_hi_s {
@@ -961,6 +1237,36 @@
unsigned long larger:1; /* RO */
unsigned long rsvd_45_63:19;
} s;
+ struct uv1h_gr1_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } s1;
+ struct uvxh_gr1_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } sx;
+ struct uv2h_gr1_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long rsvd_45_63:19;
+ } s2;
+ struct uv3h_gr1_tlb_mmr_read_data_hi_s {
+ unsigned long pfn:41; /* RO */
+ unsigned long gaa:2; /* RO */
+ unsigned long dirty:1; /* RO */
+ unsigned long larger:1; /* RO */
+ unsigned long aa_ext:1; /* RO */
+ unsigned long undef_46_54:9; /* Undefined */
+ unsigned long way_ecc:9; /* RO */
+ } s3;
};
/* ========================================================================= */
@@ -968,9 +1274,11 @@
/* ========================================================================= */
#define UV1H_GR1_TLB_MMR_READ_DATA_LO 0x8010a8UL
#define UV2H_GR1_TLB_MMR_READ_DATA_LO 0x10010a8UL
-#define UVH_GR1_TLB_MMR_READ_DATA_LO (is_uv1_hub() ? \
- UV1H_GR1_TLB_MMR_READ_DATA_LO : \
- UV2H_GR1_TLB_MMR_READ_DATA_LO)
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO 0x10010a8UL
+#define UVH_GR1_TLB_MMR_READ_DATA_LO \
+ (is_uv1_hub() ? UV1H_GR1_TLB_MMR_READ_DATA_LO : \
+ (is_uv2_hub() ? UV2H_GR1_TLB_MMR_READ_DATA_LO : \
+ UV3H_GR1_TLB_MMR_READ_DATA_LO))
#define UVH_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
#define UVH_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
@@ -979,6 +1287,34 @@
#define UVH_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
#define UVH_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UVXH_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV2H_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT 0
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT 39
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT 63
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_VPN_MASK 0x0000007fffffffffUL
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK 0x7fffff8000000000UL
+#define UV3H_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK 0x8000000000000000UL
+
union uvh_gr1_tlb_mmr_read_data_lo_u {
unsigned long v;
struct uvh_gr1_tlb_mmr_read_data_lo_s {
@@ -986,12 +1322,32 @@
unsigned long asid:24; /* RO */
unsigned long valid:1; /* RO */
} s;
+ struct uv1h_gr1_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s1;
+ struct uvxh_gr1_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } sx;
+ struct uv2h_gr1_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s2;
+ struct uv3h_gr1_tlb_mmr_read_data_lo_s {
+ unsigned long vpn:39; /* RO */
+ unsigned long asid:24; /* RO */
+ unsigned long valid:1; /* RO */
+ } s3;
};
/* ========================================================================= */
/* UVH_INT_CMPB */
/* ========================================================================= */
-#define UVH_INT_CMPB 0x22080UL
+#define UVH_INT_CMPB 0x22080UL
#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
@@ -1007,10 +1363,13 @@
/* ========================================================================= */
/* UVH_INT_CMPC */
/* ========================================================================= */
-#define UVH_INT_CMPC 0x22100UL
+#define UVH_INT_CMPC 0x22100UL
-#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
-#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0xffffffffffffffUL
+#define UV1H_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UV1H_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+#define UVXH_INT_CMPC_REAL_TIME_CMP_2_SHFT 0
+#define UVXH_INT_CMPC_REAL_TIME_CMP_2_MASK 0x00ffffffffffffffUL
union uvh_int_cmpc_u {
unsigned long v;
@@ -1023,10 +1382,13 @@
/* ========================================================================= */
/* UVH_INT_CMPD */
/* ========================================================================= */
-#define UVH_INT_CMPD 0x22180UL
+#define UVH_INT_CMPD 0x22180UL
-#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
-#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0xffffffffffffffUL
+#define UV1H_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UV1H_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+#define UVXH_INT_CMPD_REAL_TIME_CMP_3_SHFT 0
+#define UVXH_INT_CMPD_REAL_TIME_CMP_3_MASK 0x00ffffffffffffffUL
union uvh_int_cmpd_u {
unsigned long v;
@@ -1039,8 +1401,8 @@
/* ========================================================================= */
/* UVH_IPI_INT */
/* ========================================================================= */
-#define UVH_IPI_INT 0x60500UL
-#define UVH_IPI_INT_32 0x348
+#define UVH_IPI_INT 0x60500UL
+#define UVH_IPI_INT_32 0x348
#define UVH_IPI_INT_VECTOR_SHFT 0
#define UVH_IPI_INT_DELIVERY_MODE_SHFT 8
@@ -1069,8 +1431,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST */
/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x9c0
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x9c0
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
@@ -1091,8 +1453,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST */
/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x9c8
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x9c8
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
@@ -1109,8 +1471,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL */
/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x9d0
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x9d0
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
@@ -1127,8 +1489,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */
/* ========================================================================= */
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0xa68
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0xa68
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
@@ -1189,14 +1551,21 @@
/* ========================================================================= */
/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */
/* ========================================================================= */
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0xa70
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x320088UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0xa70
+
/* ========================================================================= */
/* UVH_LB_BAU_MISC_CONTROL */
/* ========================================================================= */
-#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
-#define UVH_LB_BAU_MISC_CONTROL_32 0xa10
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV1H_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV2H_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV3H_LB_BAU_MISC_CONTROL 0x320170UL
+#define UVH_LB_BAU_MISC_CONTROL_32 0xa10
+#define UV1H_LB_BAU_MISC_CONTROL_32 0x320170UL
+#define UV2H_LB_BAU_MISC_CONTROL_32 0x320170UL
+#define UV3H_LB_BAU_MISC_CONTROL_32 0x320170UL
#define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
#define UVH_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
@@ -1213,6 +1582,7 @@
#define UVH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24
#define UVH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27
#define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28
+#define UVH_LB_BAU_MISC_CONTROL_FUN_SHFT 48
#define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL
#define UVH_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL
#define UVH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL
@@ -1228,6 +1598,7 @@
#define UVH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL
#define UVH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL
#define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
+#define UVH_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
#define UV1H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
#define UV1H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
@@ -1262,6 +1633,53 @@
#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
#define UV1H_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
+#define UVXH_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
+#define UVXH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9
+#define UVXH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10
+#define UVXH_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11
+#define UVXH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15
+#define UVXH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20
+#define UVXH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21
+#define UVXH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23
+#define UVXH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24
+#define UVXH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_SHFT 29
+#define UVXH_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_SHFT 30
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_SHFT 31
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_SHFT 32
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT 33
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_SHFT 34
+#define UVXH_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT 35
+#define UVXH_LB_BAU_MISC_CONTROL_FUN_SHFT 48
+#define UVXH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL
+#define UVXH_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL
+#define UVXH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL
+#define UVXH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL
+#define UVXH_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL
+#define UVXH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL
+#define UVXH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL
+#define UVXH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL
+#define UVXH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL
+#define UVXH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_MASK 0x0000000020000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_MASK 0x0000000040000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_MASK 0x0000000080000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_MASK 0x0000000100000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_MASK 0x0000000200000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_MASK 0x0000000400000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_MASK 0x0000000800000000UL
+#define UVXH_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
+
#define UV2H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
#define UV2H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
#define UV2H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9
@@ -1309,6 +1727,59 @@
#define UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_MASK 0x0000000800000000UL
#define UV2H_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
+#define UV3H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
+#define UV3H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9
+#define UV3H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10
+#define UV3H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11
+#define UV3H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15
+#define UV3H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20
+#define UV3H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21
+#define UV3H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23
+#define UV3H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24
+#define UV3H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_SHFT 29
+#define UV3H_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_SHFT 30
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_SHFT 31
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_SHFT 32
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT 33
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_SHFT 34
+#define UV3H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT 35
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_QUIESCE_MSGS_TO_QPI_SHFT 36
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_PREFETCH_HINT_SHFT 37
+#define UV3H_LB_BAU_MISC_CONTROL_THREAD_KILL_TIMEBASE_SHFT 38
+#define UV3H_LB_BAU_MISC_CONTROL_FUN_SHFT 48
+#define UV3H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL
+#define UV3H_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL
+#define UV3H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL
+#define UV3H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL
+#define UV3H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL
+#define UV3H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL
+#define UV3H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL
+#define UV3H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL
+#define UV3H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL
+#define UV3H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_MASK 0x0000000020000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_MASK 0x0000000040000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_MASK 0x0000000080000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_MASK 0x0000000100000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_MASK 0x0000000200000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_MASK 0x0000000400000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_MASK 0x0000000800000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_SUPPRESS_QUIESCE_MSGS_TO_QPI_MASK 0x0000001000000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_PREFETCH_HINT_MASK 0x0000002000000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_THREAD_KILL_TIMEBASE_MASK 0x00003fc000000000UL
+#define UV3H_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
+
union uvh_lb_bau_misc_control_u {
unsigned long v;
struct uvh_lb_bau_misc_control_s {
@@ -1327,7 +1798,8 @@
unsigned long programmed_initial_priority:3; /* RW */
unsigned long use_incoming_priority:1; /* RW */
unsigned long enable_programmed_initial_priority:1;/* RW */
- unsigned long rsvd_29_63:35;
+ unsigned long rsvd_29_47:19;
+ unsigned long fun:16; /* RW */
} s;
struct uv1h_lb_bau_misc_control_s {
unsigned long rejection_delay:8; /* RW */
@@ -1348,6 +1820,32 @@
unsigned long rsvd_29_47:19;
unsigned long fun:16; /* RW */
} s1;
+ struct uvxh_lb_bau_misc_control_s {
+ unsigned long rejection_delay:8; /* RW */
+ unsigned long apic_mode:1; /* RW */
+ unsigned long force_broadcast:1; /* RW */
+ unsigned long force_lock_nop:1; /* RW */
+ unsigned long qpi_agent_presence_vector:3; /* RW */
+ unsigned long descriptor_fetch_mode:1; /* RW */
+ unsigned long enable_intd_soft_ack_mode:1; /* RW */
+ unsigned long intd_soft_ack_timeout_period:4; /* RW */
+ unsigned long enable_dual_mapping_mode:1; /* RW */
+ unsigned long vga_io_port_decode_enable:1; /* RW */
+ unsigned long vga_io_port_16_bit_decode:1; /* RW */
+ unsigned long suppress_dest_registration:1; /* RW */
+ unsigned long programmed_initial_priority:3; /* RW */
+ unsigned long use_incoming_priority:1; /* RW */
+ unsigned long enable_programmed_initial_priority:1;/* RW */
+ unsigned long enable_automatic_apic_mode_selection:1;/* RW */
+ unsigned long apic_mode_status:1; /* RO */
+ unsigned long suppress_interrupts_to_self:1; /* RW */
+ unsigned long enable_lock_based_system_flush:1;/* RW */
+ unsigned long enable_extended_sb_status:1; /* RW */
+ unsigned long suppress_int_prio_udt_to_self:1;/* RW */
+ unsigned long use_legacy_descriptor_formats:1;/* RW */
+ unsigned long rsvd_36_47:12;
+ unsigned long fun:16; /* RW */
+ } sx;
struct uv2h_lb_bau_misc_control_s {
unsigned long rejection_delay:8; /* RW */
unsigned long apic_mode:1; /* RW */
@@ -1374,13 +1872,42 @@
unsigned long rsvd_36_47:12;
unsigned long fun:16; /* RW */
} s2;
+ struct uv3h_lb_bau_misc_control_s {
+ unsigned long rejection_delay:8; /* RW */
+ unsigned long apic_mode:1; /* RW */
+ unsigned long force_broadcast:1; /* RW */
+ unsigned long force_lock_nop:1; /* RW */
+ unsigned long qpi_agent_presence_vector:3; /* RW */
+ unsigned long descriptor_fetch_mode:1; /* RW */
+ unsigned long enable_intd_soft_ack_mode:1; /* RW */
+ unsigned long intd_soft_ack_timeout_period:4; /* RW */
+ unsigned long enable_dual_mapping_mode:1; /* RW */
+ unsigned long vga_io_port_decode_enable:1; /* RW */
+ unsigned long vga_io_port_16_bit_decode:1; /* RW */
+ unsigned long suppress_dest_registration:1; /* RW */
+ unsigned long programmed_initial_priority:3; /* RW */
+ unsigned long use_incoming_priority:1; /* RW */
+ unsigned long enable_programmed_initial_priority:1;/* RW */
+ unsigned long enable_automatic_apic_mode_selection:1;/* RW */
+ unsigned long apic_mode_status:1; /* RO */
+ unsigned long suppress_interrupts_to_self:1; /* RW */
+ unsigned long enable_lock_based_system_flush:1;/* RW */
+ unsigned long enable_extended_sb_status:1; /* RW */
+ unsigned long suppress_int_prio_udt_to_self:1;/* RW */
+ unsigned long use_legacy_descriptor_formats:1;/* RW */
+ unsigned long suppress_quiesce_msgs_to_qpi:1; /* RW */
+ unsigned long enable_intd_prefetch_hint:1; /* RW */
+ unsigned long thread_kill_timebase:8; /* RW */
+ unsigned long rsvd_46_47:2;
+ unsigned long fun:16; /* RW */
+ } s3;
};
/* ========================================================================= */
/* UVH_LB_BAU_SB_ACTIVATION_CONTROL */
/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8
#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT 62
@@ -1402,8 +1929,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_SB_ACTIVATION_STATUS_0 */
/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
@@ -1418,8 +1945,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_SB_ACTIVATION_STATUS_1 */
/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
@@ -1434,8 +1961,8 @@
/* ========================================================================= */
/* UVH_LB_BAU_SB_DESCRIPTOR_BASE */
/* ========================================================================= */
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0
#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT 49
@@ -1456,7 +1983,10 @@
/* ========================================================================= */
/* UVH_NODE_ID */
/* ========================================================================= */
-#define UVH_NODE_ID 0x0UL
+#define UVH_NODE_ID 0x0UL
+#define UV1H_NODE_ID 0x0UL
+#define UV2H_NODE_ID 0x0UL
+#define UV3H_NODE_ID 0x0UL
#define UVH_NODE_ID_FORCE1_SHFT 0
#define UVH_NODE_ID_MANUFACTURER_SHFT 1
@@ -1484,6 +2014,21 @@
#define UV1H_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
#define UV1H_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+#define UVXH_NODE_ID_FORCE1_SHFT 0
+#define UVXH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVXH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVXH_NODE_ID_REVISION_SHFT 28
+#define UVXH_NODE_ID_NODE_ID_SHFT 32
+#define UVXH_NODE_ID_NODES_PER_BIT_SHFT 50
+#define UVXH_NODE_ID_NI_PORT_SHFT 57
+#define UVXH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVXH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVXH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVXH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVXH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVXH_NODE_ID_NODES_PER_BIT_MASK 0x01fc000000000000UL
+#define UVXH_NODE_ID_NI_PORT_MASK 0x3e00000000000000UL
+
#define UV2H_NODE_ID_FORCE1_SHFT 0
#define UV2H_NODE_ID_MANUFACTURER_SHFT 1
#define UV2H_NODE_ID_PART_NUMBER_SHFT 12
@@ -1499,6 +2044,25 @@
#define UV2H_NODE_ID_NODES_PER_BIT_MASK 0x01fc000000000000UL
#define UV2H_NODE_ID_NI_PORT_MASK 0x3e00000000000000UL
+#define UV3H_NODE_ID_FORCE1_SHFT 0
+#define UV3H_NODE_ID_MANUFACTURER_SHFT 1
+#define UV3H_NODE_ID_PART_NUMBER_SHFT 12
+#define UV3H_NODE_ID_REVISION_SHFT 28
+#define UV3H_NODE_ID_NODE_ID_SHFT 32
+#define UV3H_NODE_ID_ROUTER_SELECT_SHFT 48
+#define UV3H_NODE_ID_RESERVED_2_SHFT 49
+#define UV3H_NODE_ID_NODES_PER_BIT_SHFT 50
+#define UV3H_NODE_ID_NI_PORT_SHFT 57
+#define UV3H_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UV3H_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UV3H_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UV3H_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UV3H_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UV3H_NODE_ID_ROUTER_SELECT_MASK 0x0001000000000000UL
+#define UV3H_NODE_ID_RESERVED_2_MASK 0x0002000000000000UL
+#define UV3H_NODE_ID_NODES_PER_BIT_MASK 0x01fc000000000000UL
+#define UV3H_NODE_ID_NI_PORT_MASK 0x3e00000000000000UL
+
union uvh_node_id_u {
unsigned long v;
struct uvh_node_id_s {
@@ -1521,6 +2085,17 @@
unsigned long ni_port:4; /* RO */
unsigned long rsvd_60_63:4;
} s1;
+ struct uvxh_node_id_s {
+ unsigned long force1:1; /* RO */
+ unsigned long manufacturer:11; /* RO */
+ unsigned long part_number:16; /* RO */
+ unsigned long revision:4; /* RO */
+ unsigned long node_id:15; /* RW */
+ unsigned long rsvd_47_49:3;
+ unsigned long nodes_per_bit:7; /* RO */
+ unsigned long ni_port:5; /* RO */
+ unsigned long rsvd_62_63:2;
+ } sx;
struct uv2h_node_id_s {
unsigned long force1:1; /* RO */
unsigned long manufacturer:11; /* RO */
@@ -1532,13 +2107,26 @@
unsigned long ni_port:5; /* RO */
unsigned long rsvd_62_63:2;
} s2;
+ struct uv3h_node_id_s {
+ unsigned long force1:1; /* RO */
+ unsigned long manufacturer:11; /* RO */
+ unsigned long part_number:16; /* RO */
+ unsigned long revision:4; /* RO */
+ unsigned long node_id:15; /* RW */
+ unsigned long rsvd_47:1;
+ unsigned long router_select:1; /* RO */
+ unsigned long rsvd_49:1;
+ unsigned long nodes_per_bit:7; /* RO */
+ unsigned long ni_port:5; /* RO */
+ unsigned long rsvd_62_63:2;
+ } s3;
};
/* ========================================================================= */
/* UVH_NODE_PRESENT_TABLE */
/* ========================================================================= */
-#define UVH_NODE_PRESENT_TABLE 0x1400UL
-#define UVH_NODE_PRESENT_TABLE_DEPTH 16
+#define UVH_NODE_PRESENT_TABLE 0x1400UL
+#define UVH_NODE_PRESENT_TABLE_DEPTH 16
#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0
#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL
@@ -1553,7 +2141,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
@@ -1577,7 +2165,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
@@ -1601,7 +2189,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
@@ -1625,7 +2213,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
@@ -1642,7 +2230,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
@@ -1659,7 +2247,7 @@
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
@@ -1676,7 +2264,10 @@
/* ========================================================================= */
/* UVH_RH_GAM_CONFIG_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+#define UV1H_RH_GAM_CONFIG_MMR 0x1600000UL
+#define UV2H_RH_GAM_CONFIG_MMR 0x1600000UL
+#define UV3H_RH_GAM_CONFIG_MMR 0x1600000UL
#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
@@ -1690,11 +2281,21 @@
#define UV1H_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
#define UV1H_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+#define UVXH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVXH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVXH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVXH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+
#define UV2H_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
#define UV2H_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
#define UV2H_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
#define UV2H_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UV3H_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UV3H_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UV3H_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UV3H_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+
union uvh_rh_gam_config_mmr_u {
unsigned long v;
struct uvh_rh_gam_config_mmr_s {
@@ -1709,20 +2310,37 @@
unsigned long mmiol_cfg:1; /* RW */
unsigned long rsvd_13_63:51;
} s1;
+ struct uvxh_rh_gam_config_mmr_s {
+ unsigned long m_skt:6; /* RW */
+ unsigned long n_skt:4; /* RW */
+ unsigned long rsvd_10_63:54;
+ } sx;
struct uv2h_rh_gam_config_mmr_s {
unsigned long m_skt:6; /* RW */
unsigned long n_skt:4; /* RW */
unsigned long rsvd_10_63:54;
} s2;
+ struct uv3h_rh_gam_config_mmr_s {
+ unsigned long m_skt:6; /* RW */
+ unsigned long n_skt:4; /* RW */
+ unsigned long rsvd_10_63:54;
+ } s3;
};
/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
@@ -1733,6 +2351,13 @@
#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
@@ -1740,12 +2365,23 @@
#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_MODE_SHFT 62
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_MODE_MASK 0x4000000000000000UL
+#define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
union uvh_rh_gam_gru_overlay_config_mmr_u {
unsigned long v;
struct uvh_rh_gam_gru_overlay_config_mmr_s {
unsigned long rsvd_0_27:28;
unsigned long base:18; /* RW */
- unsigned long rsvd_46_62:17;
+ unsigned long rsvd_46_51:6;
+ unsigned long n_gru:4; /* RW */
+ unsigned long rsvd_56_62:7;
unsigned long enable:1; /* RW */
} s;
struct uv1h_rh_gam_gru_overlay_config_mmr_s {
@@ -1758,6 +2394,14 @@
unsigned long rsvd_56_62:7;
unsigned long enable:1; /* RW */
} s1;
+ struct uvxh_rh_gam_gru_overlay_config_mmr_s {
+ unsigned long rsvd_0_27:28;
+ unsigned long base:18; /* RW */
+ unsigned long rsvd_46_51:6;
+ unsigned long n_gru:4; /* RW */
+ unsigned long rsvd_56_62:7;
+ unsigned long enable:1; /* RW */
+ } sx;
struct uv2h_rh_gam_gru_overlay_config_mmr_s {
unsigned long rsvd_0_27:28;
unsigned long base:18; /* RW */
@@ -1766,12 +2410,22 @@
unsigned long rsvd_56_62:7;
unsigned long enable:1; /* RW */
} s2;
+ struct uv3h_rh_gam_gru_overlay_config_mmr_s {
+ unsigned long rsvd_0_27:28;
+ unsigned long base:18; /* RW */
+ unsigned long rsvd_46_51:6;
+ unsigned long n_gru:4; /* RW */
+ unsigned long rsvd_56_61:6;
+ unsigned long mode:1; /* RW */
+ unsigned long enable:1; /* RW */
+ } s3;
};
/* ========================================================================= */
/* UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
+#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
+#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30
#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46
@@ -1814,10 +2468,15 @@
/* ========================================================================= */
/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+#define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
@@ -1826,11 +2485,21 @@
#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+#define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+#define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
union uvh_rh_gam_mmr_overlay_config_mmr_u {
unsigned long v;
struct uvh_rh_gam_mmr_overlay_config_mmr_s {
@@ -1846,18 +2515,30 @@
unsigned long rsvd_47_62:16;
unsigned long enable:1; /* RW */
} s1;
+ struct uvxh_rh_gam_mmr_overlay_config_mmr_s {
+ unsigned long rsvd_0_25:26;
+ unsigned long base:20; /* RW */
+ unsigned long rsvd_46_62:17;
+ unsigned long enable:1; /* RW */
+ } sx;
struct uv2h_rh_gam_mmr_overlay_config_mmr_s {
unsigned long rsvd_0_25:26;
unsigned long base:20; /* RW */
unsigned long rsvd_46_62:17;
unsigned long enable:1; /* RW */
} s2;
+ struct uv3h_rh_gam_mmr_overlay_config_mmr_s {
+ unsigned long rsvd_0_25:26;
+ unsigned long base:20; /* RW */
+ unsigned long rsvd_46_62:17;
+ unsigned long enable:1; /* RW */
+ } s3;
};
/* ========================================================================= */
/* UVH_RTC */
/* ========================================================================= */
-#define UVH_RTC 0x340000UL
+#define UVH_RTC 0x340000UL
#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
@@ -1873,7 +2554,7 @@
/* ========================================================================= */
/* UVH_RTC1_INT_CONFIG */
/* ========================================================================= */
-#define UVH_RTC1_INT_CONFIG 0x615c0UL
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
@@ -1911,8 +2592,8 @@
/* ========================================================================= */
/* UVH_SCRATCH5 */
/* ========================================================================= */
-#define UVH_SCRATCH5 0x2d0200UL
-#define UVH_SCRATCH5_32 0x778
+#define UVH_SCRATCH5 0x2d0200UL
+#define UVH_SCRATCH5_32 0x778
#define UVH_SCRATCH5_SCRATCH5_SHFT 0
#define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL
@@ -1925,79 +2606,79 @@
};
/* ========================================================================= */
-/* UV2H_EVENT_OCCURRED2 */
+/* UVXH_EVENT_OCCURRED2 */
/* ========================================================================= */
-#define UV2H_EVENT_OCCURRED2 0x70100UL
-#define UV2H_EVENT_OCCURRED2_32 0xb68
+#define UVXH_EVENT_OCCURRED2 0x70100UL
+#define UVXH_EVENT_OCCURRED2_32 0xb68
-#define UV2H_EVENT_OCCURRED2_RTC_0_SHFT 0
-#define UV2H_EVENT_OCCURRED2_RTC_1_SHFT 1
-#define UV2H_EVENT_OCCURRED2_RTC_2_SHFT 2
-#define UV2H_EVENT_OCCURRED2_RTC_3_SHFT 3
-#define UV2H_EVENT_OCCURRED2_RTC_4_SHFT 4
-#define UV2H_EVENT_OCCURRED2_RTC_5_SHFT 5
-#define UV2H_EVENT_OCCURRED2_RTC_6_SHFT 6
-#define UV2H_EVENT_OCCURRED2_RTC_7_SHFT 7
-#define UV2H_EVENT_OCCURRED2_RTC_8_SHFT 8
-#define UV2H_EVENT_OCCURRED2_RTC_9_SHFT 9
-#define UV2H_EVENT_OCCURRED2_RTC_10_SHFT 10
-#define UV2H_EVENT_OCCURRED2_RTC_11_SHFT 11
-#define UV2H_EVENT_OCCURRED2_RTC_12_SHFT 12
-#define UV2H_EVENT_OCCURRED2_RTC_13_SHFT 13
-#define UV2H_EVENT_OCCURRED2_RTC_14_SHFT 14
-#define UV2H_EVENT_OCCURRED2_RTC_15_SHFT 15
-#define UV2H_EVENT_OCCURRED2_RTC_16_SHFT 16
-#define UV2H_EVENT_OCCURRED2_RTC_17_SHFT 17
-#define UV2H_EVENT_OCCURRED2_RTC_18_SHFT 18
-#define UV2H_EVENT_OCCURRED2_RTC_19_SHFT 19
-#define UV2H_EVENT_OCCURRED2_RTC_20_SHFT 20
-#define UV2H_EVENT_OCCURRED2_RTC_21_SHFT 21
-#define UV2H_EVENT_OCCURRED2_RTC_22_SHFT 22
-#define UV2H_EVENT_OCCURRED2_RTC_23_SHFT 23
-#define UV2H_EVENT_OCCURRED2_RTC_24_SHFT 24
-#define UV2H_EVENT_OCCURRED2_RTC_25_SHFT 25
-#define UV2H_EVENT_OCCURRED2_RTC_26_SHFT 26
-#define UV2H_EVENT_OCCURRED2_RTC_27_SHFT 27
-#define UV2H_EVENT_OCCURRED2_RTC_28_SHFT 28
-#define UV2H_EVENT_OCCURRED2_RTC_29_SHFT 29
-#define UV2H_EVENT_OCCURRED2_RTC_30_SHFT 30
-#define UV2H_EVENT_OCCURRED2_RTC_31_SHFT 31
-#define UV2H_EVENT_OCCURRED2_RTC_0_MASK 0x0000000000000001UL
-#define UV2H_EVENT_OCCURRED2_RTC_1_MASK 0x0000000000000002UL
-#define UV2H_EVENT_OCCURRED2_RTC_2_MASK 0x0000000000000004UL
-#define UV2H_EVENT_OCCURRED2_RTC_3_MASK 0x0000000000000008UL
-#define UV2H_EVENT_OCCURRED2_RTC_4_MASK 0x0000000000000010UL
-#define UV2H_EVENT_OCCURRED2_RTC_5_MASK 0x0000000000000020UL
-#define UV2H_EVENT_OCCURRED2_RTC_6_MASK 0x0000000000000040UL
-#define UV2H_EVENT_OCCURRED2_RTC_7_MASK 0x0000000000000080UL
-#define UV2H_EVENT_OCCURRED2_RTC_8_MASK 0x0000000000000100UL
-#define UV2H_EVENT_OCCURRED2_RTC_9_MASK 0x0000000000000200UL
-#define UV2H_EVENT_OCCURRED2_RTC_10_MASK 0x0000000000000400UL
-#define UV2H_EVENT_OCCURRED2_RTC_11_MASK 0x0000000000000800UL
-#define UV2H_EVENT_OCCURRED2_RTC_12_MASK 0x0000000000001000UL
-#define UV2H_EVENT_OCCURRED2_RTC_13_MASK 0x0000000000002000UL
-#define UV2H_EVENT_OCCURRED2_RTC_14_MASK 0x0000000000004000UL
-#define UV2H_EVENT_OCCURRED2_RTC_15_MASK 0x0000000000008000UL
-#define UV2H_EVENT_OCCURRED2_RTC_16_MASK 0x0000000000010000UL
-#define UV2H_EVENT_OCCURRED2_RTC_17_MASK 0x0000000000020000UL
-#define UV2H_EVENT_OCCURRED2_RTC_18_MASK 0x0000000000040000UL
-#define UV2H_EVENT_OCCURRED2_RTC_19_MASK 0x0000000000080000UL
-#define UV2H_EVENT_OCCURRED2_RTC_20_MASK 0x0000000000100000UL
-#define UV2H_EVENT_OCCURRED2_RTC_21_MASK 0x0000000000200000UL
-#define UV2H_EVENT_OCCURRED2_RTC_22_MASK 0x0000000000400000UL
-#define UV2H_EVENT_OCCURRED2_RTC_23_MASK 0x0000000000800000UL
-#define UV2H_EVENT_OCCURRED2_RTC_24_MASK 0x0000000001000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_25_MASK 0x0000000002000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_26_MASK 0x0000000004000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_27_MASK 0x0000000008000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_28_MASK 0x0000000010000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_29_MASK 0x0000000020000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_30_MASK 0x0000000040000000UL
-#define UV2H_EVENT_OCCURRED2_RTC_31_MASK 0x0000000080000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_0_SHFT 0
+#define UVXH_EVENT_OCCURRED2_RTC_1_SHFT 1
+#define UVXH_EVENT_OCCURRED2_RTC_2_SHFT 2
+#define UVXH_EVENT_OCCURRED2_RTC_3_SHFT 3
+#define UVXH_EVENT_OCCURRED2_RTC_4_SHFT 4
+#define UVXH_EVENT_OCCURRED2_RTC_5_SHFT 5
+#define UVXH_EVENT_OCCURRED2_RTC_6_SHFT 6
+#define UVXH_EVENT_OCCURRED2_RTC_7_SHFT 7
+#define UVXH_EVENT_OCCURRED2_RTC_8_SHFT 8
+#define UVXH_EVENT_OCCURRED2_RTC_9_SHFT 9
+#define UVXH_EVENT_OCCURRED2_RTC_10_SHFT 10
+#define UVXH_EVENT_OCCURRED2_RTC_11_SHFT 11
+#define UVXH_EVENT_OCCURRED2_RTC_12_SHFT 12
+#define UVXH_EVENT_OCCURRED2_RTC_13_SHFT 13
+#define UVXH_EVENT_OCCURRED2_RTC_14_SHFT 14
+#define UVXH_EVENT_OCCURRED2_RTC_15_SHFT 15
+#define UVXH_EVENT_OCCURRED2_RTC_16_SHFT 16
+#define UVXH_EVENT_OCCURRED2_RTC_17_SHFT 17
+#define UVXH_EVENT_OCCURRED2_RTC_18_SHFT 18
+#define UVXH_EVENT_OCCURRED2_RTC_19_SHFT 19
+#define UVXH_EVENT_OCCURRED2_RTC_20_SHFT 20
+#define UVXH_EVENT_OCCURRED2_RTC_21_SHFT 21
+#define UVXH_EVENT_OCCURRED2_RTC_22_SHFT 22
+#define UVXH_EVENT_OCCURRED2_RTC_23_SHFT 23
+#define UVXH_EVENT_OCCURRED2_RTC_24_SHFT 24
+#define UVXH_EVENT_OCCURRED2_RTC_25_SHFT 25
+#define UVXH_EVENT_OCCURRED2_RTC_26_SHFT 26
+#define UVXH_EVENT_OCCURRED2_RTC_27_SHFT 27
+#define UVXH_EVENT_OCCURRED2_RTC_28_SHFT 28
+#define UVXH_EVENT_OCCURRED2_RTC_29_SHFT 29
+#define UVXH_EVENT_OCCURRED2_RTC_30_SHFT 30
+#define UVXH_EVENT_OCCURRED2_RTC_31_SHFT 31
+#define UVXH_EVENT_OCCURRED2_RTC_0_MASK 0x0000000000000001UL
+#define UVXH_EVENT_OCCURRED2_RTC_1_MASK 0x0000000000000002UL
+#define UVXH_EVENT_OCCURRED2_RTC_2_MASK 0x0000000000000004UL
+#define UVXH_EVENT_OCCURRED2_RTC_3_MASK 0x0000000000000008UL
+#define UVXH_EVENT_OCCURRED2_RTC_4_MASK 0x0000000000000010UL
+#define UVXH_EVENT_OCCURRED2_RTC_5_MASK 0x0000000000000020UL
+#define UVXH_EVENT_OCCURRED2_RTC_6_MASK 0x0000000000000040UL
+#define UVXH_EVENT_OCCURRED2_RTC_7_MASK 0x0000000000000080UL
+#define UVXH_EVENT_OCCURRED2_RTC_8_MASK 0x0000000000000100UL
+#define UVXH_EVENT_OCCURRED2_RTC_9_MASK 0x0000000000000200UL
+#define UVXH_EVENT_OCCURRED2_RTC_10_MASK 0x0000000000000400UL
+#define UVXH_EVENT_OCCURRED2_RTC_11_MASK 0x0000000000000800UL
+#define UVXH_EVENT_OCCURRED2_RTC_12_MASK 0x0000000000001000UL
+#define UVXH_EVENT_OCCURRED2_RTC_13_MASK 0x0000000000002000UL
+#define UVXH_EVENT_OCCURRED2_RTC_14_MASK 0x0000000000004000UL
+#define UVXH_EVENT_OCCURRED2_RTC_15_MASK 0x0000000000008000UL
+#define UVXH_EVENT_OCCURRED2_RTC_16_MASK 0x0000000000010000UL
+#define UVXH_EVENT_OCCURRED2_RTC_17_MASK 0x0000000000020000UL
+#define UVXH_EVENT_OCCURRED2_RTC_18_MASK 0x0000000000040000UL
+#define UVXH_EVENT_OCCURRED2_RTC_19_MASK 0x0000000000080000UL
+#define UVXH_EVENT_OCCURRED2_RTC_20_MASK 0x0000000000100000UL
+#define UVXH_EVENT_OCCURRED2_RTC_21_MASK 0x0000000000200000UL
+#define UVXH_EVENT_OCCURRED2_RTC_22_MASK 0x0000000000400000UL
+#define UVXH_EVENT_OCCURRED2_RTC_23_MASK 0x0000000000800000UL
+#define UVXH_EVENT_OCCURRED2_RTC_24_MASK 0x0000000001000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_25_MASK 0x0000000002000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_26_MASK 0x0000000004000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_27_MASK 0x0000000008000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_28_MASK 0x0000000010000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_29_MASK 0x0000000020000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_30_MASK 0x0000000040000000UL
+#define UVXH_EVENT_OCCURRED2_RTC_31_MASK 0x0000000080000000UL
-union uv2h_event_occurred2_u {
+union uvxh_event_occurred2_u {
unsigned long v;
- struct uv2h_event_occurred2_s {
+ struct uvxh_event_occurred2_s {
unsigned long rtc_0:1; /* RW */
unsigned long rtc_1:1; /* RW */
unsigned long rtc_2:1; /* RW */
@@ -2031,29 +2712,46 @@
unsigned long rtc_30:1; /* RW */
unsigned long rtc_31:1; /* RW */
unsigned long rsvd_32_63:32;
- } s1;
+ } sx;
};
/* ========================================================================= */
-/* UV2H_EVENT_OCCURRED2_ALIAS */
+/* UVXH_EVENT_OCCURRED2_ALIAS */
/* ========================================================================= */
-#define UV2H_EVENT_OCCURRED2_ALIAS 0x70108UL
-#define UV2H_EVENT_OCCURRED2_ALIAS_32 0xb70
+#define UVXH_EVENT_OCCURRED2_ALIAS 0x70108UL
+#define UVXH_EVENT_OCCURRED2_ALIAS_32 0xb70
+
/* ========================================================================= */
-/* UV2H_LB_BAU_SB_ACTIVATION_STATUS_2 */
+/* UVXH_LB_BAU_SB_ACTIVATION_STATUS_2 */
/* ========================================================================= */
-#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2 0x320130UL
-#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_32 0x9f0
+#define UVXH_LB_BAU_SB_ACTIVATION_STATUS_2 0x320130UL
+#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2 0x320130UL
+#define UV3H_LB_BAU_SB_ACTIVATION_STATUS_2 0x320130UL
+#define UVXH_LB_BAU_SB_ACTIVATION_STATUS_2_32 0x9f0
+#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_32 0x320130UL
+#define UV3H_LB_BAU_SB_ACTIVATION_STATUS_2_32 0x320130UL
+
+#define UVXH_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_SHFT 0
+#define UVXH_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_MASK 0xffffffffffffffffUL
#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_SHFT 0
#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_MASK 0xffffffffffffffffUL
-union uv2h_lb_bau_sb_activation_status_2_u {
+#define UV3H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_SHFT 0
+#define UV3H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_MASK 0xffffffffffffffffUL
+
+union uvxh_lb_bau_sb_activation_status_2_u {
unsigned long v;
+ struct uvxh_lb_bau_sb_activation_status_2_s {
+ unsigned long aux_error:64; /* RW */
+ } sx;
struct uv2h_lb_bau_sb_activation_status_2_s {
unsigned long aux_error:64; /* RW */
- } s1;
+ } s2;
+ struct uv3h_lb_bau_sb_activation_status_2_s {
+ unsigned long aux_error:64; /* RW */
+ } s3;
};
/* ========================================================================= */
@@ -2073,5 +2771,87 @@
} s1;
};
+/* ========================================================================= */
+/* UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR */
+/* ========================================================================= */
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR 0x1603000UL
+
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_BASE_SHFT 26
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_M_IO_SHFT 46
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_ENABLE_SHFT 63
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_M_IO_MASK 0x000fc00000000000UL
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uv3h_rh_gam_mmioh_overlay_config0_mmr_u {
+ unsigned long v;
+ struct uv3h_rh_gam_mmioh_overlay_config0_mmr_s {
+ unsigned long rsvd_0_25:26;
+ unsigned long base:20; /* RW */
+ unsigned long m_io:6; /* RW */
+ unsigned long n_io:4;
+ unsigned long rsvd_56_62:7;
+ unsigned long enable:1; /* RW */
+ } s3;
+};
+
+/* ========================================================================= */
+/* UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR */
+/* ========================================================================= */
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x1604000UL
+
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_BASE_SHFT 26
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_M_IO_SHFT 46
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_ENABLE_SHFT 63
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_M_IO_MASK 0x000fc00000000000UL
+#define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uv3h_rh_gam_mmioh_overlay_config1_mmr_u {
+ unsigned long v;
+ struct uv3h_rh_gam_mmioh_overlay_config1_mmr_s {
+ unsigned long rsvd_0_25:26;
+ unsigned long base:20; /* RW */
+ unsigned long m_io:6; /* RW */
+ unsigned long n_io:4;
+ unsigned long rsvd_56_62:7;
+ unsigned long enable:1; /* RW */
+ } s3;
+};
+
+/* ========================================================================= */
+/* UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR */
+/* ========================================================================= */
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR 0x1603800UL
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH 128
+
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_NASID_SHFT 0
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_NASID_MASK 0x0000000000007fffUL
+
+union uv3h_rh_gam_mmioh_redirect_config0_mmr_u {
+ unsigned long v;
+ struct uv3h_rh_gam_mmioh_redirect_config0_mmr_s {
+ unsigned long nasid:15; /* RW */
+ unsigned long rsvd_15_63:49;
+ } s3;
+};
+
+/* ========================================================================= */
+/* UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR */
+/* ========================================================================= */
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR 0x1604800UL
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH 128
+
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_NASID_SHFT 0
+#define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_NASID_MASK 0x0000000000007fffUL
+
+union uv3h_rh_gam_mmioh_redirect_config1_mmr_u {
+ unsigned long v;
+ struct uv3h_rh_gam_mmioh_redirect_config1_mmr_s {
+ unsigned long nasid:15; /* RW */
+ unsigned long rsvd_15_63:49;
+ } s3;
+};
+
#endif /* _ASM_X86_UV_UV_MMRS_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 5769349..7669941 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -181,19 +181,38 @@
};
struct pci_dev;
+struct msi_msg;
struct x86_msi_ops {
int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
+ void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
+ unsigned int dest, struct msi_msg *msg,
+ u8 hpet_id);
void (*teardown_msi_irq)(unsigned int irq);
void (*teardown_msi_irqs)(struct pci_dev *dev);
void (*restore_msi_irqs)(struct pci_dev *dev, int irq);
+ int (*setup_hpet_msi)(unsigned int irq, unsigned int id);
};
+struct IO_APIC_route_entry;
+struct io_apic_irq_attr;
+struct irq_data;
+struct cpumask;
+
struct x86_io_apic_ops {
- void (*init) (void);
- unsigned int (*read) (unsigned int apic, unsigned int reg);
- void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
- void (*modify)(unsigned int apic, unsigned int reg, unsigned int value);
+ void (*init) (void);
+ unsigned int (*read) (unsigned int apic, unsigned int reg);
+ void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
+ void (*modify) (unsigned int apic, unsigned int reg, unsigned int value);
+ void (*disable)(void);
+ void (*print_entries)(unsigned int apic, unsigned int nr_entries);
+ int (*set_affinity)(struct irq_data *data,
+ const struct cpumask *mask,
+ bool force);
+ int (*setup_entry)(int irq, struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr);
+ void (*eoi_ioapic_pin)(int apic, int pin, int vector);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
index f8fde90..d882975 100644
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -1,10 +1,499 @@
#ifdef CONFIG_KMEMCHECK
/* kmemcheck doesn't handle MMX/SSE/SSE2 instructions */
# include <asm-generic/xor.h>
+#elif !defined(_ASM_X86_XOR_H)
+#define _ASM_X86_XOR_H
+
+/*
+ * Optimized RAID-5 checksumming functions for SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+/*
+ * Based on
+ * High-speed RAID5 checksumming functions utilizing SSE instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+/*
+ * x86-64 changes / gcc fixes from Andi Kleen.
+ * Copyright 2002 Andi Kleen, SuSE Labs.
+ *
+ * This hasn't been optimized for the hammer yet, but there are likely
+ * no advantages to be gotten from x86-64 here anyways.
+ */
+
+#include <asm/i387.h>
+
+#ifdef CONFIG_X86_32
+/* reduce register pressure */
+# define XOR_CONSTANT_CONSTRAINT "i"
#else
+# define XOR_CONSTANT_CONSTRAINT "re"
+#endif
+
+#define OFFS(x) "16*("#x")"
+#define PF_OFFS(x) "256+16*("#x")"
+#define PF0(x) " prefetchnta "PF_OFFS(x)"(%[p1]) ;\n"
+#define LD(x, y) " movaps "OFFS(x)"(%[p1]), %%xmm"#y" ;\n"
+#define ST(x, y) " movaps %%xmm"#y", "OFFS(x)"(%[p1]) ;\n"
+#define PF1(x) " prefetchnta "PF_OFFS(x)"(%[p2]) ;\n"
+#define PF2(x) " prefetchnta "PF_OFFS(x)"(%[p3]) ;\n"
+#define PF3(x) " prefetchnta "PF_OFFS(x)"(%[p4]) ;\n"
+#define PF4(x) " prefetchnta "PF_OFFS(x)"(%[p5]) ;\n"
+#define XO1(x, y) " xorps "OFFS(x)"(%[p2]), %%xmm"#y" ;\n"
+#define XO2(x, y) " xorps "OFFS(x)"(%[p3]), %%xmm"#y" ;\n"
+#define XO3(x, y) " xorps "OFFS(x)"(%[p4]), %%xmm"#y" ;\n"
+#define XO4(x, y) " xorps "OFFS(x)"(%[p5]), %%xmm"#y" ;\n"
+#define NOP(x)
+
+#define BLK64(pf, op, i) \
+ pf(i) \
+ op(i, 0) \
+ op(i + 1, 1) \
+ op(i + 2, 2) \
+ op(i + 3, 3)
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ PF1(i) \
+ PF1(i + 2) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
+
+
+ PF0(0)
+ PF0(2)
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines),
+ [p1] "+r" (p1), [p2] "+r" (p2)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_2_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ BLK64(PF0, LD, i) \
+ BLK64(PF1, XO1, i) \
+ BLK64(NOP, ST, i) \
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines),
+ [p1] "+r" (p1), [p2] "+r" (p2)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ PF1(i) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF2(i) \
+ PF2(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
+
+
+ PF0(0)
+ PF0(2)
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines),
+ [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_3_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ BLK64(PF0, LD, i) \
+ BLK64(PF1, XO1, i) \
+ BLK64(PF2, XO2, i) \
+ BLK64(NOP, ST, i) \
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines),
+ [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ PF1(i) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF2(i) \
+ PF2(i + 2) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ PF3(i) \
+ PF3(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ XO3(i, 0) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
+
+
+ PF0(0)
+ PF0(2)
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " add %[inc], %[p4] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines), [p1] "+r" (p1),
+ [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_4_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ BLK64(PF0, LD, i) \
+ BLK64(PF1, XO1, i) \
+ BLK64(PF2, XO2, i) \
+ BLK64(PF3, XO3, i) \
+ BLK64(NOP, ST, i) \
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " add %[inc], %[p4] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines), [p1] "+r" (p1),
+ [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ PF1(i) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF2(i) \
+ PF2(i + 2) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ PF3(i) \
+ PF3(i + 2) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ PF4(i) \
+ PF4(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO3(i, 0) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
+ XO4(i, 0) \
+ XO4(i + 1, 1) \
+ XO4(i + 2, 2) \
+ XO4(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
+
+
+ PF0(0)
+ PF0(2)
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " add %[inc], %[p4] ;\n"
+ " add %[inc], %[p5] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines), [p1] "+r" (p1), [p2] "+r" (p2),
+ [p3] "+r" (p3), [p4] "+r" (p4), [p5] "+r" (p5)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static void
+xor_sse_5_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+ unsigned long lines = bytes >> 8;
+
+ kernel_fpu_begin();
+
+ asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+ BLK64(PF0, LD, i) \
+ BLK64(PF1, XO1, i) \
+ BLK64(PF2, XO2, i) \
+ BLK64(PF3, XO3, i) \
+ BLK64(PF4, XO4, i) \
+ BLK64(NOP, ST, i) \
+
+ " .align 32 ;\n"
+ " 1: ;\n"
+
+ BLOCK(0)
+ BLOCK(4)
+ BLOCK(8)
+ BLOCK(12)
+
+ " add %[inc], %[p1] ;\n"
+ " add %[inc], %[p2] ;\n"
+ " add %[inc], %[p3] ;\n"
+ " add %[inc], %[p4] ;\n"
+ " add %[inc], %[p5] ;\n"
+ " dec %[cnt] ;\n"
+ " jnz 1b ;\n"
+ : [cnt] "+r" (lines), [p1] "+r" (p1), [p2] "+r" (p2),
+ [p3] "+r" (p3), [p4] "+r" (p4), [p5] "+r" (p5)
+ : [inc] XOR_CONSTANT_CONSTRAINT (256UL)
+ : "memory");
+
+ kernel_fpu_end();
+}
+
+static struct xor_block_template xor_block_sse_pf64 = {
+ .name = "prefetch64-sse",
+ .do_2 = xor_sse_2_pf64,
+ .do_3 = xor_sse_3_pf64,
+ .do_4 = xor_sse_4_pf64,
+ .do_5 = xor_sse_5_pf64,
+};
+
+#undef LD
+#undef XO1
+#undef XO2
+#undef XO3
+#undef XO4
+#undef ST
+#undef NOP
+#undef BLK64
+#undef BLOCK
+
+#undef XOR_CONSTANT_CONSTRAINT
+
#ifdef CONFIG_X86_32
# include <asm/xor_32.h>
#else
# include <asm/xor_64.h>
#endif
-#endif
+
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+ AVX_SELECT(FASTEST)
+
+#endif /* _ASM_X86_XOR_H */
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
index f79cb7e..ce05722 100644
--- a/arch/x86/include/asm/xor_32.h
+++ b/arch/x86/include/asm/xor_32.h
@@ -2,7 +2,7 @@
#define _ASM_X86_XOR_32_H
/*
- * Optimized RAID-5 checksumming functions for MMX and SSE.
+ * Optimized RAID-5 checksumming functions for MMX.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -529,290 +529,6 @@
.do_5 = xor_p5_mmx_5,
};
-/*
- * Cache avoiding checksumming functions utilizing KNI instructions
- * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
- */
-
-#define OFFS(x) "16*("#x")"
-#define PF_OFFS(x) "256+16*("#x")"
-#define PF0(x) " prefetchnta "PF_OFFS(x)"(%1) ;\n"
-#define LD(x, y) " movaps "OFFS(x)"(%1), %%xmm"#y" ;\n"
-#define ST(x, y) " movaps %%xmm"#y", "OFFS(x)"(%1) ;\n"
-#define PF1(x) " prefetchnta "PF_OFFS(x)"(%2) ;\n"
-#define PF2(x) " prefetchnta "PF_OFFS(x)"(%3) ;\n"
-#define PF3(x) " prefetchnta "PF_OFFS(x)"(%4) ;\n"
-#define PF4(x) " prefetchnta "PF_OFFS(x)"(%5) ;\n"
-#define PF5(x) " prefetchnta "PF_OFFS(x)"(%6) ;\n"
-#define XO1(x, y) " xorps "OFFS(x)"(%2), %%xmm"#y" ;\n"
-#define XO2(x, y) " xorps "OFFS(x)"(%3), %%xmm"#y" ;\n"
-#define XO3(x, y) " xorps "OFFS(x)"(%4), %%xmm"#y" ;\n"
-#define XO4(x, y) " xorps "OFFS(x)"(%5), %%xmm"#y" ;\n"
-#define XO5(x, y) " xorps "OFFS(x)"(%6), %%xmm"#y" ;\n"
-
-
-static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
- unsigned long lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- LD(i, 0) \
- LD(i + 1, 1) \
- PF1(i) \
- PF1(i + 2) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO1(i, 0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- ST(i, 0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2)
- :
- : "memory");
-
- kernel_fpu_end();
-}
-
-static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3)
-{
- unsigned long lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i,0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO1(i,0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- XO2(i,0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- ST(i,0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r"(p2), "+r"(p3)
- :
- : "memory" );
-
- kernel_fpu_end();
-}
-
-static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4)
-{
- unsigned long lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i,0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- XO1(i,0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- PF3(i) \
- PF3(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO2(i,0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- XO3(i,0) \
- XO3(i + 1, 1) \
- XO3(i + 2, 2) \
- XO3(i + 3, 3) \
- ST(i,0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
- :
- : "memory" );
-
- kernel_fpu_end();
-}
-
-static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
- unsigned long lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- /* Make sure GCC forgets anything it knows about p4 or p5,
- such that it won't pass to the asm volatile below a
- register that is shared with any other variable. That's
- because we modify p4 and p5 there, but we can't mark them
- as read/write, otherwise we'd overflow the 10-asm-operands
- limit of GCC < 3.1. */
- asm("" : "+r" (p4), "+r" (p5));
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i,0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- XO1(i,0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- PF3(i) \
- PF3(i + 2) \
- XO2(i,0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- PF4(i) \
- PF4(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO3(i,0) \
- XO3(i + 1, 1) \
- XO3(i + 2, 2) \
- XO3(i + 3, 3) \
- XO4(i,0) \
- XO4(i + 1, 1) \
- XO4(i + 2, 2) \
- XO4(i + 3, 3) \
- ST(i,0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " addl $256, %5 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- : "r" (p4), "r" (p5)
- : "memory");
-
- /* p4 and p5 were modified, and now the variables are dead.
- Clobber them just to be sure nobody does something stupid
- like assuming they have some legal value. */
- asm("" : "=r" (p4), "=r" (p5));
-
- kernel_fpu_end();
-}
-
static struct xor_block_template xor_block_pIII_sse = {
.name = "pIII_sse",
.do_2 = xor_sse_2,
@@ -827,26 +543,25 @@
/* Also try the generic routines. */
#include <asm-generic/xor.h>
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES \
-do { \
- xor_speed(&xor_block_8regs); \
- xor_speed(&xor_block_8regs_p); \
- xor_speed(&xor_block_32regs); \
- xor_speed(&xor_block_32regs_p); \
- AVX_XOR_SPEED; \
- if (cpu_has_xmm) \
- xor_speed(&xor_block_pIII_sse); \
- if (cpu_has_mmx) { \
- xor_speed(&xor_block_pII_mmx); \
- xor_speed(&xor_block_p5_mmx); \
- } \
-} while (0)
-
/* We force the use of the SSE xor block because it can write around L2.
We may also be able to load into the L1 only depending on how the cpu
deals with a load to a line that is being prefetched. */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
- AVX_SELECT(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES \
+do { \
+ AVX_XOR_SPEED; \
+ if (cpu_has_xmm) { \
+ xor_speed(&xor_block_pIII_sse); \
+ xor_speed(&xor_block_sse_pf64); \
+ } else if (cpu_has_mmx) { \
+ xor_speed(&xor_block_pII_mmx); \
+ xor_speed(&xor_block_p5_mmx); \
+ } else { \
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_8regs_p); \
+ xor_speed(&xor_block_32regs); \
+ xor_speed(&xor_block_32regs_p); \
+ } \
+} while (0)
#endif /* _ASM_X86_XOR_32_H */
diff --git a/arch/x86/include/asm/xor_64.h b/arch/x86/include/asm/xor_64.h
index 87ac522..546f1e3 100644
--- a/arch/x86/include/asm/xor_64.h
+++ b/arch/x86/include/asm/xor_64.h
@@ -1,301 +1,6 @@
#ifndef _ASM_X86_XOR_64_H
#define _ASM_X86_XOR_64_H
-/*
- * Optimized RAID-5 checksumming functions for MMX and SSE.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
- * Cache avoiding checksumming functions utilizing KNI instructions
- * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
- */
-
-/*
- * Based on
- * High-speed RAID5 checksumming functions utilizing SSE instructions.
- * Copyright (C) 1998 Ingo Molnar.
- */
-
-/*
- * x86-64 changes / gcc fixes from Andi Kleen.
- * Copyright 2002 Andi Kleen, SuSE Labs.
- *
- * This hasn't been optimized for the hammer yet, but there are likely
- * no advantages to be gotten from x86-64 here anyways.
- */
-
-#include <asm/i387.h>
-
-#define OFFS(x) "16*("#x")"
-#define PF_OFFS(x) "256+16*("#x")"
-#define PF0(x) " prefetchnta "PF_OFFS(x)"(%[p1]) ;\n"
-#define LD(x, y) " movaps "OFFS(x)"(%[p1]), %%xmm"#y" ;\n"
-#define ST(x, y) " movaps %%xmm"#y", "OFFS(x)"(%[p1]) ;\n"
-#define PF1(x) " prefetchnta "PF_OFFS(x)"(%[p2]) ;\n"
-#define PF2(x) " prefetchnta "PF_OFFS(x)"(%[p3]) ;\n"
-#define PF3(x) " prefetchnta "PF_OFFS(x)"(%[p4]) ;\n"
-#define PF4(x) " prefetchnta "PF_OFFS(x)"(%[p5]) ;\n"
-#define PF5(x) " prefetchnta "PF_OFFS(x)"(%[p6]) ;\n"
-#define XO1(x, y) " xorps "OFFS(x)"(%[p2]), %%xmm"#y" ;\n"
-#define XO2(x, y) " xorps "OFFS(x)"(%[p3]), %%xmm"#y" ;\n"
-#define XO3(x, y) " xorps "OFFS(x)"(%[p4]), %%xmm"#y" ;\n"
-#define XO4(x, y) " xorps "OFFS(x)"(%[p5]), %%xmm"#y" ;\n"
-#define XO5(x, y) " xorps "OFFS(x)"(%[p6]), %%xmm"#y" ;\n"
-
-
-static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
- unsigned int lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- LD(i, 0) \
- LD(i + 1, 1) \
- PF1(i) \
- PF1(i + 2) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO1(i, 0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- ST(i, 0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " decl %[cnt] ; jnz 1b"
- : [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
- : [inc] "r" (256UL)
- : "memory");
-
- kernel_fpu_end();
-}
-
-static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3)
-{
- unsigned int lines = bytes >> 8;
-
- kernel_fpu_begin();
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i, 0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO1(i, 0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- XO2(i, 0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- ST(i, 0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
- " decl %[cnt] ; jnz 1b"
- : [cnt] "+r" (lines),
- [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
- : [inc] "r" (256UL)
- : "memory");
- kernel_fpu_end();
-}
-
-static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4)
-{
- unsigned int lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i, 0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- XO1(i, 0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- PF3(i) \
- PF3(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO2(i, 0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- XO3(i, 0) \
- XO3(i + 1, 1) \
- XO3(i + 2, 2) \
- XO3(i + 3, 3) \
- ST(i, 0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
- " addq %[inc], %[p4] ;\n"
- " decl %[cnt] ; jnz 1b"
- : [cnt] "+c" (lines),
- [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
- : [inc] "r" (256UL)
- : "memory" );
-
- kernel_fpu_end();
-}
-
-static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
- unsigned int lines = bytes >> 8;
-
- kernel_fpu_begin();
-
- asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i + 2) \
- LD(i, 0) \
- LD(i + 1, 1) \
- LD(i + 2, 2) \
- LD(i + 3, 3) \
- PF2(i) \
- PF2(i + 2) \
- XO1(i, 0) \
- XO1(i + 1, 1) \
- XO1(i + 2, 2) \
- XO1(i + 3, 3) \
- PF3(i) \
- PF3(i + 2) \
- XO2(i, 0) \
- XO2(i + 1, 1) \
- XO2(i + 2, 2) \
- XO2(i + 3, 3) \
- PF4(i) \
- PF4(i + 2) \
- PF0(i + 4) \
- PF0(i + 6) \
- XO3(i, 0) \
- XO3(i + 1, 1) \
- XO3(i + 2, 2) \
- XO3(i + 3, 3) \
- XO4(i, 0) \
- XO4(i + 1, 1) \
- XO4(i + 2, 2) \
- XO4(i + 3, 3) \
- ST(i, 0) \
- ST(i + 1, 1) \
- ST(i + 2, 2) \
- ST(i + 3, 3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
- " addq %[inc], %[p4] ;\n"
- " addq %[inc], %[p5] ;\n"
- " decl %[cnt] ; jnz 1b"
- : [cnt] "+c" (lines),
- [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
- [p5] "+r" (p5)
- : [inc] "r" (256UL)
- : "memory");
-
- kernel_fpu_end();
-}
-
static struct xor_block_template xor_block_sse = {
.name = "generic_sse",
.do_2 = xor_sse_2,
@@ -308,17 +13,15 @@
/* Also try the AVX routines */
#include <asm/xor_avx.h>
+/* We force the use of the SSE xor block because it can write around L2.
+ We may also be able to load into the L1 only depending on how the cpu
+ deals with a load to a line that is being prefetched. */
#undef XOR_TRY_TEMPLATES
#define XOR_TRY_TEMPLATES \
do { \
AVX_XOR_SPEED; \
+ xor_speed(&xor_block_sse_pf64); \
xor_speed(&xor_block_sse); \
} while (0)
-/* We force the use of the SSE xor block because it can write around L2.
- We may also be able to load into the L1 only depending on how the cpu
- deals with a load to a line that is being prefetched. */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
- AVX_SELECT(&xor_block_sse)
-
#endif /* _ASM_X86_XOR_64_H */
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
index 433a59f..f26d277 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -103,6 +103,8 @@
#define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10)
#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11)
+#define MSR_IA32_POWER_CTL 0x000001fc
+
#define MSR_IA32_MC0_CTL 0x00000400
#define MSR_IA32_MC0_STATUS 0x00000401
#define MSR_IA32_MC0_ADDR 0x00000402
@@ -194,6 +196,8 @@
/* Fam 15h MSRs */
#define MSR_F15H_PERF_CTL 0xc0010200
#define MSR_F15H_PERF_CTR 0xc0010201
+#define MSR_F15H_NB_PERF_CTL 0xc0010240
+#define MSR_F15H_NB_PERF_CTR 0xc0010241
/* Fam 10h MSRs */
#define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058
@@ -272,6 +276,7 @@
#define MSR_IA32_PLATFORM_ID 0x00000017
#define MSR_IA32_EBL_CR_POWERON 0x0000002a
#define MSR_EBC_FREQUENCY_ID 0x0000002c
+#define MSR_SMI_COUNT 0x00000034
#define MSR_IA32_FEATURE_CONTROL 0x0000003a
#define MSR_IA32_TSC_ADJUST 0x0000003b
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 34e923a..ac3b3d0 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -65,8 +65,7 @@
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_OPTPROBES) += kprobes-opt.o
+obj-y += kprobes/
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index afdc3f75..c9876efe 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -240,7 +240,7 @@
dw_apb_clockevent_pause(adev->timer);
if (system_state == SYSTEM_RUNNING) {
pr_debug("skipping APBT CPU %lu offline\n", cpu);
- } else if (adev) {
+ } else {
pr_debug("APBT clockevent for cpu %lu offline\n", cpu);
dw_apb_clockevent_stop(adev->timer);
}
@@ -311,7 +311,6 @@
#ifdef CONFIG_SMP
int i;
struct sfi_timer_table_entry *p_mtmr;
- unsigned int percpu_timer;
struct apbt_dev *adev;
#endif
@@ -346,13 +345,10 @@
return;
}
pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus());
- if (num_possible_cpus() <= sfi_mtimer_num) {
- percpu_timer = 1;
+ if (num_possible_cpus() <= sfi_mtimer_num)
apbt_num_timers_used = num_possible_cpus();
- } else {
- percpu_timer = 0;
+ else
apbt_num_timers_used = 1;
- }
pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used);
/* here we set up per CPU timer data structure */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b994cc8..a5b4dce 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1477,8 +1477,7 @@
* Now that local APIC setup is completed for BP, configure the fault
* handling for interrupt remapping.
*/
- if (irq_remapping_enabled)
- irq_remap_enable_fault_handling();
+ irq_remap_enable_fault_handling();
}
@@ -2251,8 +2250,7 @@
local_irq_save(flags);
disable_local_APIC();
- if (irq_remapping_enabled)
- irq_remapping_disable();
+ irq_remapping_disable();
local_irq_restore(flags);
return 0;
@@ -2268,16 +2266,15 @@
return;
local_irq_save(flags);
- if (irq_remapping_enabled) {
- /*
- * IO-APIC and PIC have their own resume routines.
- * We just mask them here to make sure the interrupt
- * subsystem is completely quiet while we enable x2apic
- * and interrupt-remapping.
- */
- mask_ioapic_entries();
- legacy_pic->mask_all();
- }
+
+ /*
+ * IO-APIC and PIC have their own resume routines.
+ * We just mask them here to make sure the interrupt
+ * subsystem is completely quiet while we enable x2apic
+ * and interrupt-remapping.
+ */
+ mask_ioapic_entries();
+ legacy_pic->mask_all();
if (x2apic_mode)
enable_x2apic();
@@ -2320,8 +2317,7 @@
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
- if (irq_remapping_enabled)
- irq_remapping_reenable(x2apic_mode);
+ irq_remapping_reenable(x2apic_mode);
local_irq_restore(flags);
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b739d39..9ed796c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -68,22 +68,6 @@
#define for_each_irq_pin(entry, head) \
for (entry = head; entry; entry = entry->next)
-#ifdef CONFIG_IRQ_REMAP
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
-static inline bool irq_remapped(struct irq_cfg *cfg)
-{
- return cfg->irq_2_iommu.iommu != NULL;
-}
-#else
-static inline bool irq_remapped(struct irq_cfg *cfg)
-{
- return false;
-}
-static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
-{
-}
-#endif
-
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
@@ -300,9 +284,9 @@
return cfg;
}
-static int alloc_irq_from(unsigned int from, int node)
+static int alloc_irqs_from(unsigned int from, unsigned int count, int node)
{
- return irq_alloc_desc_from(from, node);
+ return irq_alloc_descs_from(from, count, node);
}
static void free_irq_at(unsigned int at, struct irq_cfg *cfg)
@@ -326,7 +310,7 @@
+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
}
-static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
+void io_apic_eoi(unsigned int apic, unsigned int vector)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
writel(vector, &io_apic->eoi);
@@ -573,19 +557,10 @@
* Otherwise, we simulate the EOI message manually by changing the trigger
* mode to edge and then back to level, with RTE being masked during this.
*/
-static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg)
+void native_eoi_ioapic_pin(int apic, int pin, int vector)
{
if (mpc_ioapic_ver(apic) >= 0x20) {
- /*
- * Intr-remapping uses pin number as the virtual vector
- * in the RTE. Actual vector is programmed in
- * intr-remapping table entry. Hence for the io-apic
- * EOI we use the pin number.
- */
- if (cfg && irq_remapped(cfg))
- io_apic_eoi(apic, pin);
- else
- io_apic_eoi(apic, vector);
+ io_apic_eoi(apic, vector);
} else {
struct IO_APIC_route_entry entry, entry1;
@@ -606,14 +581,15 @@
}
}
-static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
{
struct irq_pin_list *entry;
unsigned long flags;
raw_spin_lock_irqsave(&ioapic_lock, flags);
for_each_irq_pin(entry, cfg->irq_2_pin)
- __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg);
+ x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
+ cfg->vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -650,7 +626,7 @@
}
raw_spin_lock_irqsave(&ioapic_lock, flags);
- __eoi_ioapic_pin(apic, pin, entry.vector, NULL);
+ x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -1304,25 +1280,18 @@
fasteoi = false;
}
- if (irq_remapped(cfg)) {
- irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- irq_remap_modify_chip_defaults(chip);
+ if (setup_remapped_irq(irq, cfg, chip))
fasteoi = trigger != 0;
- }
hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
irq_set_chip_and_handler_name(irq, chip, hdl,
fasteoi ? "fasteoi" : "edge");
}
-static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
+int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
{
- if (irq_remapping_enabled)
- return setup_ioapic_remapped_entry(irq, entry, destination,
- vector, attr);
-
memset(entry, 0, sizeof(*entry));
entry->delivery_mode = apic->irq_delivery_mode;
@@ -1370,8 +1339,8 @@
attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin,
cfg->vector, irq, attr->trigger, attr->polarity, dest);
- if (setup_ioapic_entry(irq, &entry, dest, cfg->vector, attr)) {
- pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
+ if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) {
+ pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
__clear_irq_vector(irq, cfg);
@@ -1479,9 +1448,6 @@
struct IO_APIC_route_entry entry;
unsigned int dest;
- if (irq_remapping_enabled)
- return;
-
memset(&entry, 0, sizeof(entry));
/*
@@ -1513,9 +1479,63 @@
ioapic_write_entry(ioapic_idx, pin, entry);
}
-__apicdebuginit(void) print_IO_APIC(int ioapic_idx)
+void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
{
int i;
+
+ pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n");
+
+ for (i = 0; i <= nr_entries; i++) {
+ struct IO_APIC_route_entry entry;
+
+ entry = ioapic_read_entry(apic, i);
+
+ pr_debug(" %02x %02X ", i, entry.dest);
+ pr_cont("%1d %1d %1d %1d %1d "
+ "%1d %1d %02X\n",
+ entry.mask,
+ entry.trigger,
+ entry.irr,
+ entry.polarity,
+ entry.delivery_status,
+ entry.dest_mode,
+ entry.delivery_mode,
+ entry.vector);
+ }
+}
+
+void intel_ir_io_apic_print_entries(unsigned int apic,
+ unsigned int nr_entries)
+{
+ int i;
+
+ pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n");
+
+ for (i = 0; i <= nr_entries; i++) {
+ struct IR_IO_APIC_route_entry *ir_entry;
+ struct IO_APIC_route_entry entry;
+
+ entry = ioapic_read_entry(apic, i);
+
+ ir_entry = (struct IR_IO_APIC_route_entry *)&entry;
+
+ pr_debug(" %02x %04X ", i, ir_entry->index);
+ pr_cont("%1d %1d %1d %1d %1d "
+ "%1d %1d %X %02X\n",
+ ir_entry->format,
+ ir_entry->mask,
+ ir_entry->trigger,
+ ir_entry->irr,
+ ir_entry->polarity,
+ ir_entry->delivery_status,
+ ir_entry->index2,
+ ir_entry->zero,
+ ir_entry->vector);
+ }
+}
+
+__apicdebuginit(void) print_IO_APIC(int ioapic_idx)
+{
union IO_APIC_reg_00 reg_00;
union IO_APIC_reg_01 reg_01;
union IO_APIC_reg_02 reg_02;
@@ -1568,58 +1588,7 @@
printk(KERN_DEBUG ".... IRQ redirection table:\n");
- if (irq_remapping_enabled) {
- printk(KERN_DEBUG " NR Indx Fmt Mask Trig IRR"
- " Pol Stat Indx2 Zero Vect:\n");
- } else {
- printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
- " Stat Dmod Deli Vect:\n");
- }
-
- for (i = 0; i <= reg_01.bits.entries; i++) {
- if (irq_remapping_enabled) {
- struct IO_APIC_route_entry entry;
- struct IR_IO_APIC_route_entry *ir_entry;
-
- entry = ioapic_read_entry(ioapic_idx, i);
- ir_entry = (struct IR_IO_APIC_route_entry *) &entry;
- printk(KERN_DEBUG " %02x %04X ",
- i,
- ir_entry->index
- );
- pr_cont("%1d %1d %1d %1d %1d "
- "%1d %1d %X %02X\n",
- ir_entry->format,
- ir_entry->mask,
- ir_entry->trigger,
- ir_entry->irr,
- ir_entry->polarity,
- ir_entry->delivery_status,
- ir_entry->index2,
- ir_entry->zero,
- ir_entry->vector
- );
- } else {
- struct IO_APIC_route_entry entry;
-
- entry = ioapic_read_entry(ioapic_idx, i);
- printk(KERN_DEBUG " %02x %02X ",
- i,
- entry.dest
- );
- pr_cont("%1d %1d %1d %1d %1d "
- "%1d %1d %02X\n",
- entry.mask,
- entry.trigger,
- entry.irr,
- entry.polarity,
- entry.delivery_status,
- entry.dest_mode,
- entry.delivery_mode,
- entry.vector
- );
- }
- }
+ x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries);
}
__apicdebuginit(void) print_IO_APICs(void)
@@ -1921,30 +1890,14 @@
clear_IO_APIC();
}
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
+void native_disable_io_apic(void)
{
/*
- * Clear the IO-APIC before rebooting:
- */
- clear_IO_APIC();
-
- if (!legacy_pic->nr_legacy_irqs)
- return;
-
- /*
* If the i8259 is routed through an IOAPIC
* Put that IOAPIC in virtual wire mode
* so legacy interrupts can be delivered.
- *
- * With interrupt-remapping, for now we will use virtual wire A mode,
- * as virtual wire B is little complex (need to configure both
- * IOAPIC RTE as well as interrupt-remapping table entry).
- * As this gets called during crash dump, keep this simple for now.
*/
- if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) {
+ if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
memset(&entry, 0, sizeof(entry));
@@ -1964,12 +1917,25 @@
ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
}
- /*
- * Use virtual wire A mode when interrupt remapping is enabled.
- */
if (cpu_has_apic || apic_from_smp_config())
- disconnect_bsp_APIC(!irq_remapping_enabled &&
- ioapic_i8259.pin != -1);
+ disconnect_bsp_APIC(ioapic_i8259.pin != -1);
+
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
+ /*
+ * Clear the IO-APIC before rebooting:
+ */
+ clear_IO_APIC();
+
+ if (!legacy_pic->nr_legacy_irqs)
+ return;
+
+ x86_io_apic_ops.disable();
}
#ifdef CONFIG_X86_32
@@ -2322,12 +2288,8 @@
apic = entry->apic;
pin = entry->pin;
- /*
- * With interrupt-remapping, destination information comes
- * from interrupt-remapping table entry.
- */
- if (!irq_remapped(cfg))
- io_apic_write(apic, 0x11 + pin*2, dest);
+
+ io_apic_write(apic, 0x11 + pin*2, dest);
reg = io_apic_read(apic, 0x10 + pin*2);
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
@@ -2369,9 +2331,10 @@
return 0;
}
-static int
-ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
+
+int native_ioapic_set_affinity(struct irq_data *data,
+ const struct cpumask *mask,
+ bool force)
{
unsigned int dest, irq = data->irq;
unsigned long flags;
@@ -2548,33 +2511,6 @@
ioapic_irqd_unmask(data, cfg, masked);
}
-#ifdef CONFIG_IRQ_REMAP
-static void ir_ack_apic_edge(struct irq_data *data)
-{
- ack_APIC_irq();
-}
-
-static void ir_ack_apic_level(struct irq_data *data)
-{
- ack_APIC_irq();
- eoi_ioapic_irq(data->irq, data->chip_data);
-}
-
-static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
-{
- seq_printf(p, " IR-%s", data->chip->name);
-}
-
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
-{
- chip->irq_print_chip = ir_print_prefix;
- chip->irq_ack = ir_ack_apic_edge;
- chip->irq_eoi = ir_ack_apic_level;
-
- chip->irq_set_affinity = set_remapped_irq_affinity;
-}
-#endif /* CONFIG_IRQ_REMAP */
-
static struct irq_chip ioapic_chip __read_mostly = {
.name = "IO-APIC",
.irq_startup = startup_ioapic_irq,
@@ -2582,7 +2518,7 @@
.irq_unmask = unmask_ioapic_irq,
.irq_ack = ack_apic_edge,
.irq_eoi = ack_apic_level,
- .irq_set_affinity = ioapic_set_affinity,
+ .irq_set_affinity = native_ioapic_set_affinity,
.irq_retrigger = ioapic_retrigger_irq,
};
@@ -2781,8 +2717,7 @@
* 8259A.
*/
if (pin1 == -1) {
- if (irq_remapping_enabled)
- panic("BIOS bug: timer not connected to IO-APIC");
+ panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
@@ -2814,8 +2749,7 @@
clear_IO_APIC_pin(0, pin1);
goto out;
}
- if (irq_remapping_enabled)
- panic("timer doesn't work through Interrupt-remapped IO-APIC");
+ panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC");
local_irq_disable();
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
@@ -2982,37 +2916,58 @@
/*
* Dynamic irq allocate and deallocation
*/
-unsigned int create_irq_nr(unsigned int from, int node)
+unsigned int __create_irqs(unsigned int from, unsigned int count, int node)
{
- struct irq_cfg *cfg;
+ struct irq_cfg **cfg;
unsigned long flags;
- unsigned int ret = 0;
- int irq;
+ int irq, i;
if (from < nr_irqs_gsi)
from = nr_irqs_gsi;
- irq = alloc_irq_from(from, node);
+ cfg = kzalloc_node(count * sizeof(cfg[0]), GFP_KERNEL, node);
+ if (!cfg)
+ return 0;
+
+ irq = alloc_irqs_from(from, count, node);
if (irq < 0)
- return 0;
- cfg = alloc_irq_cfg(irq, node);
- if (!cfg) {
- free_irq_at(irq, NULL);
- return 0;
+ goto out_cfgs;
+
+ for (i = 0; i < count; i++) {
+ cfg[i] = alloc_irq_cfg(irq + i, node);
+ if (!cfg[i])
+ goto out_irqs;
}
raw_spin_lock_irqsave(&vector_lock, flags);
- if (!__assign_irq_vector(irq, cfg, apic->target_cpus()))
- ret = irq;
+ for (i = 0; i < count; i++)
+ if (__assign_irq_vector(irq + i, cfg[i], apic->target_cpus()))
+ goto out_vecs;
raw_spin_unlock_irqrestore(&vector_lock, flags);
- if (ret) {
- irq_set_chip_data(irq, cfg);
- irq_clear_status_flags(irq, IRQ_NOREQUEST);
- } else {
- free_irq_at(irq, cfg);
+ for (i = 0; i < count; i++) {
+ irq_set_chip_data(irq + i, cfg[i]);
+ irq_clear_status_flags(irq + i, IRQ_NOREQUEST);
}
- return ret;
+
+ kfree(cfg);
+ return irq;
+
+out_vecs:
+ for (i--; i >= 0; i--)
+ __clear_irq_vector(irq + i, cfg[i]);
+ raw_spin_unlock_irqrestore(&vector_lock, flags);
+out_irqs:
+ for (i = 0; i < count; i++)
+ free_irq_at(irq + i, cfg[i]);
+out_cfgs:
+ kfree(cfg);
+ return 0;
+}
+
+unsigned int create_irq_nr(unsigned int from, int node)
+{
+ return __create_irqs(from, 1, node);
}
int create_irq(void)
@@ -3037,17 +2992,55 @@
irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE);
- if (irq_remapped(cfg))
- free_remapped_irq(irq);
+ free_remapped_irq(irq);
+
raw_spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq, cfg);
raw_spin_unlock_irqrestore(&vector_lock, flags);
free_irq_at(irq, cfg);
}
+void destroy_irqs(unsigned int irq, unsigned int count)
+{
+ unsigned int i;
+
+ for (i = 0; i < count; i++)
+ destroy_irq(irq + i);
+}
+
/*
* MSI message composition
*/
+void native_compose_msi_msg(struct pci_dev *pdev,
+ unsigned int irq, unsigned int dest,
+ struct msi_msg *msg, u8 hpet_id)
+{
+ struct irq_cfg *cfg = irq_cfg(irq);
+
+ msg->address_hi = MSI_ADDR_BASE_HI;
+
+ if (x2apic_enabled())
+ msg->address_hi |= MSI_ADDR_EXT_DEST_ID(dest);
+
+ msg->address_lo =
+ MSI_ADDR_BASE_LO |
+ ((apic->irq_dest_mode == 0) ?
+ MSI_ADDR_DEST_MODE_PHYSICAL:
+ MSI_ADDR_DEST_MODE_LOGICAL) |
+ ((apic->irq_delivery_mode != dest_LowestPrio) ?
+ MSI_ADDR_REDIRECTION_CPU:
+ MSI_ADDR_REDIRECTION_LOWPRI) |
+ MSI_ADDR_DEST_ID(dest);
+
+ msg->data =
+ MSI_DATA_TRIGGER_EDGE |
+ MSI_DATA_LEVEL_ASSERT |
+ ((apic->irq_delivery_mode != dest_LowestPrio) ?
+ MSI_DATA_DELIVERY_FIXED:
+ MSI_DATA_DELIVERY_LOWPRI) |
+ MSI_DATA_VECTOR(cfg->vector);
+}
+
#ifdef CONFIG_PCI_MSI
static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
struct msi_msg *msg, u8 hpet_id)
@@ -3069,36 +3062,9 @@
if (err)
return err;
- if (irq_remapped(cfg)) {
- compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id);
- return err;
- }
+ x86_msi.compose_msi_msg(pdev, irq, dest, msg, hpet_id);
- if (x2apic_enabled())
- msg->address_hi = MSI_ADDR_BASE_HI |
- MSI_ADDR_EXT_DEST_ID(dest);
- else
- msg->address_hi = MSI_ADDR_BASE_HI;
-
- msg->address_lo =
- MSI_ADDR_BASE_LO |
- ((apic->irq_dest_mode == 0) ?
- MSI_ADDR_DEST_MODE_PHYSICAL:
- MSI_ADDR_DEST_MODE_LOGICAL) |
- ((apic->irq_delivery_mode != dest_LowestPrio) ?
- MSI_ADDR_REDIRECTION_CPU:
- MSI_ADDR_REDIRECTION_LOWPRI) |
- MSI_ADDR_DEST_ID(dest);
-
- msg->data =
- MSI_DATA_TRIGGER_EDGE |
- MSI_DATA_LEVEL_ASSERT |
- ((apic->irq_delivery_mode != dest_LowestPrio) ?
- MSI_DATA_DELIVERY_FIXED:
- MSI_DATA_DELIVERY_LOWPRI) |
- MSI_DATA_VECTOR(cfg->vector);
-
- return err;
+ return 0;
}
static int
@@ -3136,23 +3102,28 @@
.irq_retrigger = ioapic_retrigger_irq,
};
-static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
+int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
+ unsigned int irq_base, unsigned int irq_offset)
{
struct irq_chip *chip = &msi_chip;
struct msi_msg msg;
+ unsigned int irq = irq_base + irq_offset;
int ret;
ret = msi_compose_msg(dev, irq, &msg, -1);
if (ret < 0)
return ret;
- irq_set_msi_desc(irq, msidesc);
- write_msi_msg(irq, &msg);
+ irq_set_msi_desc_off(irq_base, irq_offset, msidesc);
- if (irq_remapped(irq_get_chip_data(irq))) {
- irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- irq_remap_modify_chip_defaults(chip);
- }
+ /*
+ * MSI-X message is written per-IRQ, the offset is always 0.
+ * MSI message denotes a contiguous group of IRQs, written for 0th IRQ.
+ */
+ if (!irq_offset)
+ write_msi_msg(irq, &msg);
+
+ setup_remapped_irq(irq, irq_get_chip_data(irq), chip);
irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
@@ -3163,46 +3134,26 @@
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
- int node, ret, sub_handle, index = 0;
unsigned int irq, irq_want;
struct msi_desc *msidesc;
+ int node, ret;
- /* x86 doesn't support multiple MSI yet */
+ /* Multiple MSI vectors only supported with interrupt remapping */
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
node = dev_to_node(&dev->dev);
irq_want = nr_irqs_gsi;
- sub_handle = 0;
list_for_each_entry(msidesc, &dev->msi_list, list) {
irq = create_irq_nr(irq_want, node);
if (irq == 0)
- return -1;
- irq_want = irq + 1;
- if (!irq_remapping_enabled)
- goto no_ir;
+ return -ENOSPC;
- if (!sub_handle) {
- /*
- * allocate the consecutive block of IRTE's
- * for 'nvec'
- */
- index = msi_alloc_remapped_irq(dev, irq, nvec);
- if (index < 0) {
- ret = index;
- goto error;
- }
- } else {
- ret = msi_setup_remapped_irq(dev, irq, index,
- sub_handle);
- if (ret < 0)
- goto error;
- }
-no_ir:
- ret = setup_msi_irq(dev, msidesc, irq);
+ irq_want = irq + 1;
+
+ ret = setup_msi_irq(dev, msidesc, irq, 0);
if (ret < 0)
goto error;
- sub_handle++;
}
return 0;
@@ -3298,26 +3249,19 @@
.irq_retrigger = ioapic_retrigger_irq,
};
-int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
+int default_setup_hpet_msi(unsigned int irq, unsigned int id)
{
struct irq_chip *chip = &hpet_msi_type;
struct msi_msg msg;
int ret;
- if (irq_remapping_enabled) {
- ret = setup_hpet_msi_remapped(irq, id);
- if (ret)
- return ret;
- }
-
ret = msi_compose_msg(NULL, irq, &msg, id);
if (ret < 0)
return ret;
hpet_msi_write(irq_get_handler_data(irq), &msg);
irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- if (irq_remapped(irq_get_chip_data(irq)))
- irq_remap_modify_chip_defaults(chip);
+ setup_remapped_irq(irq, irq_get_chip_data(irq), chip);
irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
return 0;
@@ -3683,10 +3627,7 @@
else
mask = apic->target_cpus();
- if (irq_remapping_enabled)
- set_remapped_irq_affinity(idata, mask, false);
- else
- ioapic_set_affinity(idata, mask, false);
+ x86_io_apic_ops.set_affinity(idata, mask, false);
}
}
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index cce91bf..7434d85 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -106,7 +106,7 @@
unsigned long mask = cpumask_bits(cpumask)[0];
unsigned long flags;
- if (WARN_ONCE(!mask, "empty IPI mask"))
+ if (!mask)
return;
local_irq_save(flags);
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 8cfade9..794f6eb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -5,7 +5,7 @@
*
* SGI UV APIC functions (note: not an Intel compatible APIC)
*
- * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/cpumask.h>
#include <linux/hardirq.h>
@@ -91,10 +91,16 @@
m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR);
uv_min_hub_revision_id = node_id.s.revision;
- if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
+ switch (node_id.s.part_number) {
+ case UV2_HUB_PART_NUMBER:
+ case UV2_HUB_PART_NUMBER_X:
uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
- if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X)
- uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+ break;
+ case UV3_HUB_PART_NUMBER:
+ case UV3_HUB_PART_NUMBER_X:
+ uv_min_hub_revision_id += UV3_HUB_REVISION_BASE - 1;
+ break;
+ }
uv_hub_info->hub_revision = uv_min_hub_revision_id;
pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
@@ -130,13 +136,16 @@
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- int pnodeid, is_uv1, is_uv2;
+ int pnodeid, is_uv1, is_uv2, is_uv3;
is_uv1 = !strcmp(oem_id, "SGI");
is_uv2 = !strcmp(oem_id, "SGI2");
- if (is_uv1 || is_uv2) {
+ is_uv3 = !strncmp(oem_id, "SGI3", 4); /* there are varieties of UV3 */
+ if (is_uv1 || is_uv2 || is_uv3) {
uv_hub_info->hub_revision =
- is_uv1 ? UV1_HUB_REVISION_BASE : UV2_HUB_REVISION_BASE;
+ (is_uv1 ? UV1_HUB_REVISION_BASE :
+ (is_uv2 ? UV2_HUB_REVISION_BASE :
+ UV3_HUB_REVISION_BASE));
pnodeid = early_get_pnodeid();
early_get_apic_pnode_shift();
x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range;
@@ -450,14 +459,17 @@
paddr = base << pshift;
bytes = (1UL << bshift) * (max_pnode + 1);
- printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
- paddr + bytes);
+ if (!paddr) {
+ pr_info("UV: Map %s_HI base address NULL\n", id);
+ return;
+ }
+ pr_info("UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, paddr + bytes);
if (map_type == map_uc)
init_extra_mapping_uc(paddr, bytes);
else
init_extra_mapping_wb(paddr, bytes);
-
}
+
static __init void map_gru_high(int max_pnode)
{
union uvh_rh_gam_gru_overlay_config_mmr_u gru;
@@ -468,7 +480,8 @@
map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
-
+ } else {
+ pr_info("UV: GRU disabled\n");
}
}
@@ -480,23 +493,146 @@
mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
if (mmr.s.enable)
map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
+ else
+ pr_info("UV: MMR disabled\n");
}
-static __init void map_mmioh_high(int max_pnode)
+/*
+ * This commonality works because both 0 & 1 versions of the MMIOH OVERLAY
+ * and REDIRECT MMR regs are exactly the same on UV3.
+ */
+struct mmioh_config {
+ unsigned long overlay;
+ unsigned long redirect;
+ char *id;
+};
+
+static __initdata struct mmioh_config mmiohs[] = {
+ {
+ UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR,
+ UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR,
+ "MMIOH0"
+ },
+ {
+ UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR,
+ UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR,
+ "MMIOH1"
+ },
+};
+
+static __init void map_mmioh_high_uv3(int index, int min_pnode, int max_pnode)
+{
+ union uv3h_rh_gam_mmioh_overlay_config0_mmr_u overlay;
+ unsigned long mmr;
+ unsigned long base;
+ int i, n, shift, m_io, max_io;
+ int nasid, lnasid, fi, li;
+ char *id;
+
+ id = mmiohs[index].id;
+ overlay.v = uv_read_local_mmr(mmiohs[index].overlay);
+ pr_info("UV: %s overlay 0x%lx base:0x%x m_io:%d\n",
+ id, overlay.v, overlay.s3.base, overlay.s3.m_io);
+ if (!overlay.s3.enable) {
+ pr_info("UV: %s disabled\n", id);
+ return;
+ }
+
+ shift = UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR_BASE_SHFT;
+ base = (unsigned long)overlay.s3.base;
+ m_io = overlay.s3.m_io;
+ mmr = mmiohs[index].redirect;
+ n = UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH;
+ min_pnode *= 2; /* convert to NASID */
+ max_pnode *= 2;
+ max_io = lnasid = fi = li = -1;
+
+ for (i = 0; i < n; i++) {
+ union uv3h_rh_gam_mmioh_redirect_config0_mmr_u redirect;
+
+ redirect.v = uv_read_local_mmr(mmr + i * 8);
+ nasid = redirect.s3.nasid;
+ if (nasid < min_pnode || max_pnode < nasid)
+ nasid = -1; /* invalid NASID */
+
+ if (nasid == lnasid) {
+ li = i;
+ if (i != n-1) /* last entry check */
+ continue;
+ }
+
+ /* check if we have a cached (or last) redirect to print */
+ if (lnasid != -1 || (i == n-1 && nasid != -1)) {
+ unsigned long addr1, addr2;
+ int f, l;
+
+ if (lnasid == -1) {
+ f = l = i;
+ lnasid = nasid;
+ } else {
+ f = fi;
+ l = li;
+ }
+ addr1 = (base << shift) +
+ f * (unsigned long)(1 << m_io);
+ addr2 = (base << shift) +
+ (l + 1) * (unsigned long)(1 << m_io);
+ pr_info("UV: %s[%03d..%03d] NASID 0x%04x ADDR 0x%016lx - 0x%016lx\n",
+ id, fi, li, lnasid, addr1, addr2);
+ if (max_io < l)
+ max_io = l;
+ }
+ fi = li = i;
+ lnasid = nasid;
+ }
+
+ pr_info("UV: %s base:0x%lx shift:%d M_IO:%d MAX_IO:%d\n",
+ id, base, shift, m_io, max_io);
+
+ if (max_io >= 0)
+ map_high(id, base, shift, m_io, max_io, map_uc);
+}
+
+static __init void map_mmioh_high(int min_pnode, int max_pnode)
{
union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
- int shift;
+ unsigned long mmr, base;
+ int shift, enable, m_io, n_io;
- mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
- if (is_uv1_hub() && mmioh.s1.enable) {
- shift = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
- map_high("MMIOH", mmioh.s1.base, shift, mmioh.s1.m_io,
- max_pnode, map_uc);
+ if (is_uv3_hub()) {
+ /* Map both MMIOH Regions */
+ map_mmioh_high_uv3(0, min_pnode, max_pnode);
+ map_mmioh_high_uv3(1, min_pnode, max_pnode);
+ return;
}
- if (is_uv2_hub() && mmioh.s2.enable) {
+
+ if (is_uv1_hub()) {
+ mmr = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR;
+ shift = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+ mmioh.v = uv_read_local_mmr(mmr);
+ enable = !!mmioh.s1.enable;
+ base = mmioh.s1.base;
+ m_io = mmioh.s1.m_io;
+ n_io = mmioh.s1.n_io;
+ } else if (is_uv2_hub()) {
+ mmr = UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR;
shift = UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
- map_high("MMIOH", mmioh.s2.base, shift, mmioh.s2.m_io,
- max_pnode, map_uc);
+ mmioh.v = uv_read_local_mmr(mmr);
+ enable = !!mmioh.s2.enable;
+ base = mmioh.s2.base;
+ m_io = mmioh.s2.m_io;
+ n_io = mmioh.s2.n_io;
+ } else
+ return;
+
+ if (enable) {
+ max_pnode &= (1 << n_io) - 1;
+ pr_info(
+ "UV: base:0x%lx shift:%d N_IO:%d M_IO:%d max_pnode:0x%x\n",
+ base, shift, m_io, n_io, max_pnode);
+ map_high("MMIOH", base, shift, m_io, max_pnode, map_uc);
+ } else {
+ pr_info("UV: MMIOH disabled\n");
}
}
@@ -724,42 +860,41 @@
void __init uv_system_init(void)
{
union uvh_rh_gam_config_mmr_u m_n_config;
- union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
- int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io;
- int gnode_extra, max_pnode = 0;
+ int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+ int gnode_extra, min_pnode = 999999, max_pnode = -1;
unsigned long mmr_base, present, paddr;
- unsigned short pnode_mask, pnode_io_mask;
+ unsigned short pnode_mask;
+ char *hub = (is_uv1_hub() ? "UV1" :
+ (is_uv2_hub() ? "UV2" :
+ "UV3"));
- printk(KERN_INFO "UV: Found %s hub\n", is_uv1_hub() ? "UV1" : "UV2");
+ pr_info("UV: Found %s hub\n", hub);
map_low_mmrs();
m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
- mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
- n_io = is_uv1_hub() ? mmioh.s1.n_io : mmioh.s2.n_io;
+ pnode_mask = (1 << n_val) - 1;
mmr_base =
uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
~UV_MMR_ENABLE;
- pnode_mask = (1 << n_val) - 1;
- pnode_io_mask = (1 << n_io) - 1;
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1;
gnode_upper = ((unsigned long)gnode_extra << m_val);
- printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n",
- n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask);
+ pr_info("UV: N:%d M:%d pnode_mask:0x%x gnode_upper/extra:0x%lx/0x%x\n",
+ n_val, m_val, pnode_mask, gnode_upper, gnode_extra);
- printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+ pr_info("UV: global MMR base 0x%lx\n", mmr_base);
for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
uv_possible_blades +=
hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
/* uv_num_possible_blades() is really the hub count */
- printk(KERN_INFO "UV: Found %d blades, %d hubs\n",
+ pr_info("UV: Found %d blades, %d hubs\n",
is_uv1_hub() ? uv_num_possible_blades() :
(uv_num_possible_blades() + 1) / 2,
uv_num_possible_blades());
@@ -794,6 +929,7 @@
uv_blade_info[blade].nr_possible_cpus = 0;
uv_blade_info[blade].nr_online_cpus = 0;
spin_lock_init(&uv_blade_info[blade].nmi_lock);
+ min_pnode = min(pnode, min_pnode);
max_pnode = max(pnode, max_pnode);
blade++;
}
@@ -856,7 +992,7 @@
map_gru_high(max_pnode);
map_mmr_high(max_pnode);
- map_mmioh_high(max_pnode & pnode_io_mask);
+ map_mmioh_high(min_pnode, max_pnode);
uv_cpu_init();
uv_scir_register_cpu_notifier();
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index d65464e..66b5faf 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -232,6 +232,7 @@
#include <linux/acpi.h>
#include <linux/syscore_ops.h>
#include <linux/i8253.h>
+#include <linux/cpuidle.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
@@ -360,13 +361,35 @@
* idle percentage above which bios idle calls are done
*/
#ifdef CONFIG_APM_CPU_IDLE
-#warning deprecated CONFIG_APM_CPU_IDLE will be deleted in 2012
#define DEFAULT_IDLE_THRESHOLD 95
#else
#define DEFAULT_IDLE_THRESHOLD 100
#endif
#define DEFAULT_IDLE_PERIOD (100 / 3)
+static int apm_cpu_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index);
+
+static struct cpuidle_driver apm_idle_driver = {
+ .name = "apm_idle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states = {
+ { /* entry 0 is for polling */ },
+ { /* entry 1 is for APM idle */
+ .name = "APM",
+ .desc = "APM idle",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 250, /* WAG */
+ .target_residency = 500, /* WAG */
+ .enter = &apm_cpu_idle
+ },
+ },
+ .state_count = 2,
+};
+
+static struct cpuidle_device apm_cpuidle_device;
+
/*
* Local variables
*/
@@ -377,7 +400,6 @@
static int clock_slowed;
static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD;
static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD;
-static int set_pm_idle;
static int suspends_pending;
static int standbys_pending;
static int ignore_sys_suspend;
@@ -884,8 +906,6 @@
#define IDLE_CALC_LIMIT (HZ * 100)
#define IDLE_LEAKY_MAX 16
-static void (*original_pm_idle)(void) __read_mostly;
-
/**
* apm_cpu_idle - cpu idling for APM capable Linux
*
@@ -894,35 +914,36 @@
* Furthermore it calls the system default idle routine.
*/
-static void apm_cpu_idle(void)
+static int apm_cpu_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
{
static int use_apm_idle; /* = 0 */
static unsigned int last_jiffies; /* = 0 */
static unsigned int last_stime; /* = 0 */
+ cputime_t stime;
int apm_idle_done = 0;
unsigned int jiffies_since_last_check = jiffies - last_jiffies;
unsigned int bucket;
- WARN_ONCE(1, "deprecated apm_cpu_idle will be deleted in 2012");
recalc:
+ task_cputime(current, NULL, &stime);
if (jiffies_since_last_check > IDLE_CALC_LIMIT) {
use_apm_idle = 0;
- last_jiffies = jiffies;
- last_stime = current->stime;
} else if (jiffies_since_last_check > idle_period) {
unsigned int idle_percentage;
- idle_percentage = current->stime - last_stime;
+ idle_percentage = stime - last_stime;
idle_percentage *= 100;
idle_percentage /= jiffies_since_last_check;
use_apm_idle = (idle_percentage > idle_threshold);
if (apm_info.forbid_idle)
use_apm_idle = 0;
- last_jiffies = jiffies;
- last_stime = current->stime;
}
+ last_jiffies = jiffies;
+ last_stime = stime;
+
bucket = IDLE_LEAKY_MAX;
while (!need_resched()) {
@@ -950,10 +971,7 @@
break;
}
}
- if (original_pm_idle)
- original_pm_idle();
- else
- default_idle();
+ default_idle();
local_irq_disable();
jiffies_since_last_check = jiffies - last_jiffies;
if (jiffies_since_last_check > idle_period)
@@ -963,7 +981,7 @@
if (apm_idle_done)
apm_do_busy();
- local_irq_enable();
+ return index;
}
/**
@@ -2381,9 +2399,9 @@
if (HZ != 100)
idle_period = (idle_period * HZ) / 100;
if (idle_threshold < 100) {
- original_pm_idle = pm_idle;
- pm_idle = apm_cpu_idle;
- set_pm_idle = 1;
+ if (!cpuidle_register_driver(&apm_idle_driver))
+ if (cpuidle_register_device(&apm_cpuidle_device))
+ cpuidle_unregister_driver(&apm_idle_driver);
}
return 0;
@@ -2393,15 +2411,9 @@
{
int error;
- if (set_pm_idle) {
- pm_idle = original_pm_idle;
- /*
- * We are about to unload the current idle thread pm callback
- * (pm_idle), Wait for all processors to update cached/local
- * copies of pm_idle before proceeding.
- */
- kick_all_cpus_sync();
- }
+ cpuidle_unregister_device(&apm_cpuidle_device);
+ cpuidle_unregister_driver(&apm_idle_driver);
+
if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
&& (apm_info.connection_version > 0x0100)) {
error = apm_engage_power_management(APM_DEVICE_ALL, 0);
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 15239ff..782c456 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -364,9 +364,9 @@
#endif
}
-int amd_get_nb_id(int cpu)
+u16 amd_get_nb_id(int cpu)
{
- int id = 0;
+ u16 id = 0;
#ifdef CONFIG_SMP
id = per_cpu(cpu_llc_id, cpu);
#endif
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 92dfec9..af6455e 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -17,15 +17,6 @@
#include <asm/paravirt.h>
#include <asm/alternative.h>
-static int __init no_halt(char *s)
-{
- WARN_ONCE(1, "\"no-hlt\" is deprecated, please use \"idle=poll\"\n");
- boot_cpu_data.hlt_works_ok = 0;
- return 1;
-}
-
-__setup("no-hlt", no_halt);
-
static int __init no_387(char *s)
{
boot_cpu_data.hard_math = 0;
@@ -89,23 +80,6 @@
pr_warn("Hmm, FPU with FDIV bug\n");
}
-static void __init check_hlt(void)
-{
- if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
- return;
-
- pr_info("Checking 'hlt' instruction... ");
- if (!boot_cpu_data.hlt_works_ok) {
- pr_cont("disabled\n");
- return;
- }
- halt();
- halt();
- halt();
- halt();
- pr_cont("OK\n");
-}
-
/*
* Check whether we are able to run this kernel safely on SMP.
*
@@ -129,7 +103,6 @@
print_cpu_info(&boot_cpu_data);
#endif
check_config();
- check_hlt();
init_utsname()->machine[1] =
'0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
alternative_instructions();
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index a8f8fa9..1e7e84a 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -79,3 +79,10 @@
if (x86_hyper->init_platform)
x86_hyper->init_platform();
}
+
+bool __init hypervisor_x2apic_available(void)
+{
+ return x86_hyper &&
+ x86_hyper->x2apic_available &&
+ x86_hyper->x2apic_available();
+}
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 84c1309c..7c6f7d5 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -1226,7 +1226,7 @@
.notifier_call = cacheinfo_cpu_callback,
};
-static int __cpuinit cache_sysfs_init(void)
+static int __init cache_sysfs_init(void)
{
int i;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 80dbda8..fc7608a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -512,11 +512,8 @@
static void mce_schedule_work(void)
{
- if (!mce_ring_empty()) {
- struct work_struct *work = &__get_cpu_var(mce_work);
- if (!work_pending(work))
- schedule_work(work);
- }
+ if (!mce_ring_empty())
+ schedule_work(&__get_cpu_var(mce_work));
}
DEFINE_PER_CPU(struct irq_work, mce_irq_work);
@@ -1351,12 +1348,7 @@
/* wake processes polling /dev/mcelog */
wake_up_interruptible(&mce_chrdev_wait);
- /*
- * There is no risk of missing notifications because
- * work_pending is always cleared before the function is
- * executed.
- */
- if (mce_helper[0] && !work_pending(&mce_trigger_work))
+ if (mce_helper[0])
schedule_work(&mce_trigger_work);
if (__ratelimit(&ratelimit))
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 0a630dd..a7d26d8 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -14,10 +14,15 @@
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
#include <asm/hyperv.h>
#include <asm/mshyperv.h>
+#include <asm/desc.h>
+#include <asm/idle.h>
+#include <asm/irq_regs.h>
struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);
@@ -30,6 +35,13 @@
if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))
return false;
+ /*
+ * Xen emulates Hyper-V to support enlightened Windows.
+ * Check to see first if we are on a Xen Hypervisor.
+ */
+ if (xen_cpuid_base())
+ return false;
+
cpuid(HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS,
&eax, &hyp_signature[0], &hyp_signature[1], &hyp_signature[2]);
@@ -68,7 +80,14 @@
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
- clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
+ if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
+ clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
+#if IS_ENABLED(CONFIG_HYPERV)
+ /*
+ * Setup the IDT for hypervisor callback.
+ */
+ alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, hyperv_callback_vector);
+#endif
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
@@ -77,3 +96,36 @@
.init_platform = ms_hyperv_init_platform,
};
EXPORT_SYMBOL(x86_hyper_ms_hyperv);
+
+#if IS_ENABLED(CONFIG_HYPERV)
+static int vmbus_irq = -1;
+static irq_handler_t vmbus_isr;
+
+void hv_register_vmbus_handler(int irq, irq_handler_t handler)
+{
+ vmbus_irq = irq;
+ vmbus_isr = handler;
+}
+
+void hyperv_vector_handler(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ struct irq_desc *desc;
+
+ irq_enter();
+ exit_idle();
+
+ desc = irq_to_desc(vmbus_irq);
+
+ if (desc)
+ generic_handle_irq_desc(vmbus_irq, desc);
+
+ irq_exit();
+ set_irq_regs(old_regs);
+}
+#else
+void hv_register_vmbus_handler(int irq, irq_handler_t handler)
+{
+}
+#endif
+EXPORT_SYMBOL_GPL(hv_register_vmbus_handler);
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 6774c17..bf0f01a 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -829,7 +829,7 @@
} else {
hwc->config_base = x86_pmu_config_addr(hwc->idx);
hwc->event_base = x86_pmu_event_addr(hwc->idx);
- hwc->event_base_rdpmc = hwc->idx;
+ hwc->event_base_rdpmc = x86_pmu_rdpmc_index(hwc->idx);
}
}
@@ -1310,11 +1310,6 @@
.attrs = NULL,
};
-struct perf_pmu_events_attr {
- struct device_attribute attr;
- u64 id;
-};
-
/*
* Remove all undefined events (x86_pmu.event_map(id) == 0)
* out of events_attr attributes.
@@ -1348,11 +1343,9 @@
#define EVENT_VAR(_id) event_attr_##_id
#define EVENT_PTR(_id) &event_attr_##_id.attr.attr
-#define EVENT_ATTR(_name, _id) \
-static struct perf_pmu_events_attr EVENT_VAR(_id) = { \
- .attr = __ATTR(_name, 0444, events_sysfs_show, NULL), \
- .id = PERF_COUNT_HW_##_id, \
-};
+#define EVENT_ATTR(_name, _id) \
+ PMU_EVENT_ATTR(_name, EVENT_VAR(_id), PERF_COUNT_HW_##_id, \
+ events_sysfs_show)
EVENT_ATTR(cpu-cycles, CPU_CYCLES );
EVENT_ATTR(instructions, INSTRUCTIONS );
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 115c1ea..7f5c75c 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -325,6 +325,8 @@
int (*schedule_events)(struct cpu_hw_events *cpuc, int n, int *assign);
unsigned eventsel;
unsigned perfctr;
+ int (*addr_offset)(int index, bool eventsel);
+ int (*rdpmc_index)(int index);
u64 (*event_map)(int);
int max_events;
int num_counters;
@@ -446,28 +448,21 @@
u64 x86_perf_event_update(struct perf_event *event);
-static inline int x86_pmu_addr_offset(int index)
-{
- int offset;
-
- /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */
- alternative_io(ASM_NOP2,
- "shll $1, %%eax",
- X86_FEATURE_PERFCTR_CORE,
- "=a" (offset),
- "a" (index));
-
- return offset;
-}
-
static inline unsigned int x86_pmu_config_addr(int index)
{
- return x86_pmu.eventsel + x86_pmu_addr_offset(index);
+ return x86_pmu.eventsel + (x86_pmu.addr_offset ?
+ x86_pmu.addr_offset(index, true) : index);
}
static inline unsigned int x86_pmu_event_addr(int index)
{
- return x86_pmu.perfctr + x86_pmu_addr_offset(index);
+ return x86_pmu.perfctr + (x86_pmu.addr_offset ?
+ x86_pmu.addr_offset(index, false) : index);
+}
+
+static inline int x86_pmu_rdpmc_index(int index)
+{
+ return x86_pmu.rdpmc_index ? x86_pmu.rdpmc_index(index) : index;
}
int x86_setup_perfctr(struct perf_event *event);
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index c93bc4e..dfdab42 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -132,21 +132,102 @@
return amd_perfmon_event_map[hw_event];
}
-static int amd_pmu_hw_config(struct perf_event *event)
+static struct event_constraint *amd_nb_event_constraint;
+
+/*
+ * Previously calculated offsets
+ */
+static unsigned int event_offsets[X86_PMC_IDX_MAX] __read_mostly;
+static unsigned int count_offsets[X86_PMC_IDX_MAX] __read_mostly;
+static unsigned int rdpmc_indexes[X86_PMC_IDX_MAX] __read_mostly;
+
+/*
+ * Legacy CPUs:
+ * 4 counters starting at 0xc0010000 each offset by 1
+ *
+ * CPUs with core performance counter extensions:
+ * 6 counters starting at 0xc0010200 each offset by 2
+ *
+ * CPUs with north bridge performance counter extensions:
+ * 4 additional counters starting at 0xc0010240 each offset by 2
+ * (indexed right above either one of the above core counters)
+ */
+static inline int amd_pmu_addr_offset(int index, bool eventsel)
{
- int ret;
+ int offset, first, base;
- /* pass precise event sampling to ibs: */
- if (event->attr.precise_ip && get_ibs_caps())
- return -ENOENT;
+ if (!index)
+ return index;
- ret = x86_pmu_hw_config(event);
+ if (eventsel)
+ offset = event_offsets[index];
+ else
+ offset = count_offsets[index];
+
+ if (offset)
+ return offset;
+
+ if (amd_nb_event_constraint &&
+ test_bit(index, amd_nb_event_constraint->idxmsk)) {
+ /*
+ * calculate the offset of NB counters with respect to
+ * base eventsel or perfctr
+ */
+
+ first = find_first_bit(amd_nb_event_constraint->idxmsk,
+ X86_PMC_IDX_MAX);
+
+ if (eventsel)
+ base = MSR_F15H_NB_PERF_CTL - x86_pmu.eventsel;
+ else
+ base = MSR_F15H_NB_PERF_CTR - x86_pmu.perfctr;
+
+ offset = base + ((index - first) << 1);
+ } else if (!cpu_has_perfctr_core)
+ offset = index;
+ else
+ offset = index << 1;
+
+ if (eventsel)
+ event_offsets[index] = offset;
+ else
+ count_offsets[index] = offset;
+
+ return offset;
+}
+
+static inline int amd_pmu_rdpmc_index(int index)
+{
+ int ret, first;
+
+ if (!index)
+ return index;
+
+ ret = rdpmc_indexes[index];
+
if (ret)
return ret;
- if (has_branch_stack(event))
- return -EOPNOTSUPP;
+ if (amd_nb_event_constraint &&
+ test_bit(index, amd_nb_event_constraint->idxmsk)) {
+ /*
+ * according to the mnual, ECX value of the NB counters is
+ * the index of the NB counter (0, 1, 2 or 3) plus 6
+ */
+ first = find_first_bit(amd_nb_event_constraint->idxmsk,
+ X86_PMC_IDX_MAX);
+ ret = index - first + 6;
+ } else
+ ret = index;
+
+ rdpmc_indexes[index] = ret;
+
+ return ret;
+}
+
+static int amd_core_hw_config(struct perf_event *event)
+{
if (event->attr.exclude_host && event->attr.exclude_guest)
/*
* When HO == GO == 1 the hardware treats that as GO == HO == 0
@@ -156,14 +237,37 @@
event->hw.config &= ~(ARCH_PERFMON_EVENTSEL_USR |
ARCH_PERFMON_EVENTSEL_OS);
else if (event->attr.exclude_host)
- event->hw.config |= AMD_PERFMON_EVENTSEL_GUESTONLY;
+ event->hw.config |= AMD64_EVENTSEL_GUESTONLY;
else if (event->attr.exclude_guest)
- event->hw.config |= AMD_PERFMON_EVENTSEL_HOSTONLY;
+ event->hw.config |= AMD64_EVENTSEL_HOSTONLY;
- if (event->attr.type != PERF_TYPE_RAW)
- return 0;
+ return 0;
+}
- event->hw.config |= event->attr.config & AMD64_RAW_EVENT_MASK;
+/*
+ * NB counters do not support the following event select bits:
+ * Host/Guest only
+ * Counter mask
+ * Invert counter mask
+ * Edge detect
+ * OS/User mode
+ */
+static int amd_nb_hw_config(struct perf_event *event)
+{
+ /* for NB, we only allow system wide counting mode */
+ if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+ return -EINVAL;
+
+ if (event->attr.exclude_user || event->attr.exclude_kernel ||
+ event->attr.exclude_host || event->attr.exclude_guest)
+ return -EINVAL;
+
+ event->hw.config &= ~(ARCH_PERFMON_EVENTSEL_USR |
+ ARCH_PERFMON_EVENTSEL_OS);
+
+ if (event->hw.config & ~(AMD64_RAW_EVENT_MASK_NB |
+ ARCH_PERFMON_EVENTSEL_INT))
+ return -EINVAL;
return 0;
}
@@ -181,6 +285,11 @@
return (hwc->config & 0xe0) == 0xe0;
}
+static inline int amd_is_perfctr_nb_event(struct hw_perf_event *hwc)
+{
+ return amd_nb_event_constraint && amd_is_nb_event(hwc);
+}
+
static inline int amd_has_nb(struct cpu_hw_events *cpuc)
{
struct amd_nb *nb = cpuc->amd_nb;
@@ -188,20 +297,37 @@
return nb && nb->nb_id != -1;
}
-static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
- struct perf_event *event)
+static int amd_pmu_hw_config(struct perf_event *event)
{
- struct hw_perf_event *hwc = &event->hw;
+ int ret;
+
+ /* pass precise event sampling to ibs: */
+ if (event->attr.precise_ip && get_ibs_caps())
+ return -ENOENT;
+
+ if (has_branch_stack(event))
+ return -EOPNOTSUPP;
+
+ ret = x86_pmu_hw_config(event);
+ if (ret)
+ return ret;
+
+ if (event->attr.type == PERF_TYPE_RAW)
+ event->hw.config |= event->attr.config & AMD64_RAW_EVENT_MASK;
+
+ if (amd_is_perfctr_nb_event(&event->hw))
+ return amd_nb_hw_config(event);
+
+ return amd_core_hw_config(event);
+}
+
+static void __amd_put_nb_event_constraints(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
struct amd_nb *nb = cpuc->amd_nb;
int i;
/*
- * only care about NB events
- */
- if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
- return;
-
- /*
* need to scan whole list because event may not have
* been assigned during scheduling
*
@@ -215,6 +341,19 @@
}
}
+static void amd_nb_interrupt_hw_config(struct hw_perf_event *hwc)
+{
+ int core_id = cpu_data(smp_processor_id()).cpu_core_id;
+
+ /* deliver interrupts only to this core */
+ if (hwc->config & ARCH_PERFMON_EVENTSEL_INT) {
+ hwc->config |= AMD64_EVENTSEL_INT_CORE_ENABLE;
+ hwc->config &= ~AMD64_EVENTSEL_INT_CORE_SEL_MASK;
+ hwc->config |= (u64)(core_id) <<
+ AMD64_EVENTSEL_INT_CORE_SEL_SHIFT;
+ }
+}
+
/*
* AMD64 NorthBridge events need special treatment because
* counter access needs to be synchronized across all cores
@@ -247,24 +386,24 @@
*
* Given that resources are allocated (cmpxchg), they must be
* eventually freed for others to use. This is accomplished by
- * calling amd_put_event_constraints().
+ * calling __amd_put_nb_event_constraints()
*
* Non NB events are not impacted by this restriction.
*/
static struct event_constraint *
-amd_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
+__amd_get_nb_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event,
+ struct event_constraint *c)
{
struct hw_perf_event *hwc = &event->hw;
struct amd_nb *nb = cpuc->amd_nb;
- struct perf_event *old = NULL;
- int max = x86_pmu.num_counters;
- int i, j, k = -1;
+ struct perf_event *old;
+ int idx, new = -1;
- /*
- * if not NB event or no NB, then no constraints
- */
- if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
- return &unconstrained;
+ if (!c)
+ c = &unconstrained;
+
+ if (cpuc->is_fake)
+ return c;
/*
* detect if already present, if so reuse
@@ -276,48 +415,36 @@
* because of successive calls to x86_schedule_events() from
* hw_perf_group_sched_in() without hw_perf_enable()
*/
- for (i = 0; i < max; i++) {
- /*
- * keep track of first free slot
- */
- if (k == -1 && !nb->owners[i])
- k = i;
+ for_each_set_bit(idx, c->idxmsk, x86_pmu.num_counters) {
+ if (new == -1 || hwc->idx == idx)
+ /* assign free slot, prefer hwc->idx */
+ old = cmpxchg(nb->owners + idx, NULL, event);
+ else if (nb->owners[idx] == event)
+ /* event already present */
+ old = event;
+ else
+ continue;
+
+ if (old && old != event)
+ continue;
+
+ /* reassign to this slot */
+ if (new != -1)
+ cmpxchg(nb->owners + new, event, NULL);
+ new = idx;
/* already present, reuse */
- if (nb->owners[i] == event)
- goto done;
- }
- /*
- * not present, so grab a new slot
- * starting either at:
- */
- if (hwc->idx != -1) {
- /* previous assignment */
- i = hwc->idx;
- } else if (k != -1) {
- /* start from free slot found */
- i = k;
- } else {
- /*
- * event not found, no slot found in
- * first pass, try again from the
- * beginning
- */
- i = 0;
- }
- j = i;
- do {
- old = cmpxchg(nb->owners+i, NULL, event);
- if (!old)
+ if (old == event)
break;
- if (++i == max)
- i = 0;
- } while (i != j);
-done:
- if (!old)
- return &nb->event_constraints[i];
+ }
- return &emptyconstraint;
+ if (new == -1)
+ return &emptyconstraint;
+
+ if (amd_is_perfctr_nb_event(hwc))
+ amd_nb_interrupt_hw_config(hwc);
+
+ return &nb->event_constraints[new];
}
static struct amd_nb *amd_alloc_nb(int cpu)
@@ -364,7 +491,7 @@
struct amd_nb *nb;
int i, nb_id;
- cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+ cpuc->perf_ctr_virt_mask = AMD64_EVENTSEL_HOSTONLY;
if (boot_cpu_data.x86_max_cores < 2)
return;
@@ -407,6 +534,26 @@
}
}
+static struct event_constraint *
+amd_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
+{
+ /*
+ * if not NB event or no NB, then no constraints
+ */
+ if (!(amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)))
+ return &unconstrained;
+
+ return __amd_get_nb_event_constraints(cpuc, event,
+ amd_nb_event_constraint);
+}
+
+static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw))
+ __amd_put_nb_event_constraints(cpuc, event);
+}
+
PMU_FORMAT_ATTR(event, "config:0-7,32-35");
PMU_FORMAT_ATTR(umask, "config:8-15" );
PMU_FORMAT_ATTR(edge, "config:18" );
@@ -496,6 +643,9 @@
static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0);
static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
+static struct event_constraint amd_NBPMC96 = EVENT_CONSTRAINT(0, 0x3C0, 0);
+static struct event_constraint amd_NBPMC74 = EVENT_CONSTRAINT(0, 0xF0, 0);
+
static struct event_constraint *
amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event)
{
@@ -561,8 +711,8 @@
return &amd_f15_PMC20;
}
case AMD_EVENT_NB:
- /* not yet implemented */
- return &emptyconstraint;
+ return __amd_get_nb_event_constraints(cpuc, event,
+ amd_nb_event_constraint);
default:
return &emptyconstraint;
}
@@ -587,6 +737,8 @@
.schedule_events = x86_schedule_events,
.eventsel = MSR_K7_EVNTSEL0,
.perfctr = MSR_K7_PERFCTR0,
+ .addr_offset = amd_pmu_addr_offset,
+ .rdpmc_index = amd_pmu_rdpmc_index,
.event_map = amd_pmu_event_map,
.max_events = ARRAY_SIZE(amd_perfmon_event_map),
.num_counters = AMD64_NUM_COUNTERS,
@@ -608,7 +760,7 @@
static int setup_event_constraints(void)
{
- if (boot_cpu_data.x86 >= 0x15)
+ if (boot_cpu_data.x86 == 0x15)
x86_pmu.get_event_constraints = amd_get_event_constraints_f15h;
return 0;
}
@@ -638,6 +790,23 @@
return 0;
}
+static int setup_perfctr_nb(void)
+{
+ if (!cpu_has_perfctr_nb)
+ return -ENODEV;
+
+ x86_pmu.num_counters += AMD64_NUM_COUNTERS_NB;
+
+ if (cpu_has_perfctr_core)
+ amd_nb_event_constraint = &amd_NBPMC96;
+ else
+ amd_nb_event_constraint = &amd_NBPMC74;
+
+ printk(KERN_INFO "perf: AMD northbridge performance counters detected\n");
+
+ return 0;
+}
+
__init int amd_pmu_init(void)
{
/* Performance-monitoring supported from K7 and later: */
@@ -648,6 +817,7 @@
setup_event_constraints();
setup_perfctr_core();
+ setup_perfctr_nb();
/* Events are common for all AMDs */
memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
@@ -678,7 +848,7 @@
* SVM is disabled the Guest-only bits still gets set and the counter
* will not count anything.
*/
- cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+ cpuc->perf_ctr_virt_mask = AMD64_EVENTSEL_HOSTONLY;
/* Reload all events */
x86_pmu_disable_all();
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 3286a92..e280253 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -28,7 +28,6 @@
{
seq_printf(m,
"fdiv_bug\t: %s\n"
- "hlt_bug\t\t: %s\n"
"f00f_bug\t: %s\n"
"coma_bug\t: %s\n"
"fpu\t\t: %s\n"
@@ -36,7 +35,6 @@
"cpuid level\t: %d\n"
"wp\t\t: %s\n",
c->fdiv_bug ? "yes" : "no",
- c->hlt_works_ok ? "no" : "yes",
c->f00f_bug ? "yes" : "no",
c->coma_bug ? "yes" : "no",
c->hard_math ? "yes" : "no",
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index d22d0c4..03a3632 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -33,6 +33,9 @@
#define VMWARE_PORT_CMD_GETVERSION 10
#define VMWARE_PORT_CMD_GETHZ 45
+#define VMWARE_PORT_CMD_GETVCPU_INFO 68
+#define VMWARE_PORT_CMD_LEGACY_X2APIC 3
+#define VMWARE_PORT_CMD_VCPU_RESERVED 31
#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
__asm__("inl (%%dx)" : \
@@ -125,10 +128,20 @@
set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE);
}
+/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
+static bool __init vmware_legacy_x2apic_available(void)
+{
+ uint32_t eax, ebx, ecx, edx;
+ VMWARE_PORT(GETVCPU_INFO, eax, ebx, ecx, edx);
+ return (eax & (1 << VMWARE_PORT_CMD_VCPU_RESERVED)) == 0 &&
+ (eax & (1 << VMWARE_PORT_CMD_LEGACY_X2APIC)) != 0;
+}
+
const __refconst struct hypervisor_x86 x86_hyper_vmware = {
.name = "VMware",
.detect = vmware_platform,
.set_cpu_features = vmware_set_cpu_features,
.init_platform = vmware_platform_setup,
+ .x2apic_available = vmware_legacy_x2apic_available,
};
EXPORT_SYMBOL(x86_hyper_vmware);
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 6ed91d9..8831176 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1091,11 +1091,18 @@
_ASM_EXTABLE(4b,9b)
ENDPROC(xen_failsafe_callback)
-BUILD_INTERRUPT3(xen_hvm_callback_vector, XEN_HVM_EVTCHN_CALLBACK,
+BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
xen_evtchn_do_upcall)
#endif /* CONFIG_XEN */
+#if IS_ENABLED(CONFIG_HYPERV)
+
+BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
+ hyperv_vector_handler)
+
+#endif /* CONFIG_HYPERV */
+
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index cb3c591..048f224 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1454,11 +1454,16 @@
CFI_ENDPROC
END(xen_failsafe_callback)
-apicinterrupt XEN_HVM_EVTCHN_CALLBACK \
+apicinterrupt HYPERVISOR_CALLBACK_VECTOR \
xen_hvm_callback_vector xen_evtchn_do_upcall
#endif /* CONFIG_XEN */
+#if IS_ENABLED(CONFIG_HYPERV)
+apicinterrupt HYPERVISOR_CALLBACK_VECTOR \
+ hyperv_callback_vector hyperv_vector_handler
+#endif /* CONFIG_HYPERV */
+
/*
* Some functions should be protected against kprobes
*/
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index c18f59d..6773c91 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -18,6 +18,7 @@
#include <asm/io_apic.h>
#include <asm/bios_ebda.h>
#include <asm/tlbflush.h>
+#include <asm/bootparam_utils.h>
static void __init i386_default_early_setup(void)
{
@@ -30,6 +31,8 @@
void __init i386_start_kernel(void)
{
+ sanitize_boot_params(&boot_params);
+
memblock_reserve(__pa_symbol(&_text),
__pa_symbol(&__bss_stop) - __pa_symbol(&_text));
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 037df57..849fc9e 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -25,6 +25,7 @@
#include <asm/kdebug.h>
#include <asm/e820.h>
#include <asm/bios_ebda.h>
+#include <asm/bootparam_utils.h>
static void __init zap_identity_mappings(void)
{
@@ -46,6 +47,7 @@
char * command_line;
memcpy(&boot_params, real_mode_data, sizeof boot_params);
+ sanitize_boot_params(&boot_params);
if (boot_params.hdr.cmd_line_ptr) {
command_line = __va(boot_params.hdr.cmd_line_ptr);
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index c8932c7..3c3f58a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -307,36 +307,45 @@
movl %eax,%cr0
/*
- * New page tables may be in 4Mbyte page mode and may
- * be using the global pages.
- *
- * NOTE! If we are on a 486 we may have no cr4 at all!
- * Specifically, cr4 exists if and only if CPUID exists
- * and has flags other than the FPU flag set.
+ * We want to start out with EFLAGS unambiguously cleared. Some BIOSes leave
+ * bits like NT set. This would confuse the debugger if this code is traced. So
+ * initialize them properly now before switching to protected mode. That means
+ * DF in particular (even though we have cleared it earlier after copying the
+ * command line) because GCC expects it.
*/
- movl $X86_EFLAGS_ID,%ecx
- pushl %ecx
- popfl
- pushfl
- popl %eax
pushl $0
popfl
+
+/*
+ * New page tables may be in 4Mbyte page mode and may be using the global pages.
+ *
+ * NOTE! If we are on a 486 we may have no cr4 at all! Specifically, cr4 exists
+ * if and only if CPUID exists and has flags other than the FPU flag set.
+ */
+ movl $-1,pa(X86_CPUID) # preset CPUID level
+ movl $X86_EFLAGS_ID,%ecx
+ pushl %ecx
+ popfl # set EFLAGS=ID
pushfl
- popl %edx
- xorl %edx,%eax
- testl %ecx,%eax
- jz 6f # No ID flag = no CPUID = no CR4
+ popl %eax # get EFLAGS
+ testl $X86_EFLAGS_ID,%eax # did EFLAGS.ID remained set?
+ jz enable_paging # hw disallowed setting of ID bit
+ # which means no CPUID and no CR4
+
+ xorl %eax,%eax
+ cpuid
+ movl %eax,pa(X86_CPUID) # save largest std CPUID function
movl $1,%eax
cpuid
- andl $~1,%edx # Ignore CPUID.FPU
- jz 6f # No flags or only CPUID.FPU = no CR4
+ andl $~1,%edx # Ignore CPUID.FPU
+ jz enable_paging # No flags or only CPUID.FPU = no CR4
movl pa(mmu_cr4_features),%eax
movl %eax,%cr4
testb $X86_CR4_PAE, %al # check if PAE is enabled
- jz 6f
+ jz enable_paging
/* Check if extended functions are implemented */
movl $0x80000000, %eax
@@ -344,7 +353,7 @@
/* Value must be in the range 0x80000001 to 0x8000ffff */
subl $0x80000001, %eax
cmpl $(0x8000ffff-0x80000001), %eax
- ja 6f
+ ja enable_paging
/* Clear bogus XD_DISABLE bits */
call verify_cpu
@@ -353,7 +362,7 @@
cpuid
/* Execute Disable bit supported? */
btl $(X86_FEATURE_NX & 31), %edx
- jnc 6f
+ jnc enable_paging
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
@@ -363,7 +372,7 @@
/* Make changes effective */
wrmsr
-6:
+enable_paging:
/*
* Enable paging
@@ -378,14 +387,6 @@
addl $__PAGE_OFFSET, %esp
/*
- * Initialize eflags. Some BIOS's leave bits like NT set. This would
- * confuse the debugger if this code is traced.
- * XXX - best to initialize before switching to protected mode.
- */
- pushl $0
- popfl
-
-/*
* start system 32-bit setup. We need to re-do some of the things done
* in 16-bit mode for the "real" operations.
*/
@@ -394,31 +395,11 @@
jz 1f # Did we do this already?
call *%eax
1:
-
-/* check if it is 486 or 386. */
-/*
- * XXX - this does a lot of unnecessary setup. Alignment checks don't
- * apply at our cpl of 0 and the stack ought to be aligned already, and
- * we don't need to preserve eflags.
- */
- movl $-1,X86_CPUID # -1 for no CPUID initially
- movb $3,X86 # at least 386
- pushfl # push EFLAGS
- popl %eax # get EFLAGS
- movl %eax,%ecx # save original EFLAGS
- xorl $0x240000,%eax # flip AC and ID bits in EFLAGS
- pushl %eax # copy to EFLAGS
- popfl # set EFLAGS
- pushfl # get new EFLAGS
- popl %eax # put it in eax
- xorl %ecx,%eax # change in flags
- pushl %ecx # restore original EFLAGS
- popfl
- testl $0x40000,%eax # check if AC bit changed
- je is386
- movb $4,X86 # at least 486
- testl $0x200000,%eax # check if ID bit changed
+/*
+ * Check if it is 486
+ */
+ cmpl $-1,X86_CPUID
je is486
/* get vendor info */
@@ -444,11 +425,10 @@
movb %cl,X86_MASK
movl %edx,X86_CAPABILITY
-is486: movl $0x50022,%ecx # set AM, WP, NE and MP
- jmp 2f
-
-is386: movl $2,%ecx # set MP
-2: movl %cr0,%eax
+is486:
+ movb $4,X86
+ movl $0x50022,%ecx # set AM, WP, NE and MP
+ movl %cr0,%eax
andl $0x80000011,%eax # Save PG,PE,ET
orl %ecx,%eax
movl %eax,%cr0
@@ -473,7 +453,6 @@
xorl %eax,%eax # Clear LDT
lldt %ax
- cld # gcc2 wants the direction flag cleared at all times
pushl $0 # fake return address for unwinder
jmp *(initial_code)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index e28670f..da85a8e 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -478,7 +478,7 @@
static int hpet_setup_msi_irq(unsigned int irq)
{
- if (arch_setup_hpet_msi(irq, hpet_blockid)) {
+ if (x86_msi.setup_hpet_msi(irq, hpet_blockid)) {
destroy_irq(irq);
return -EINVAL;
}
diff --git a/arch/x86/kernel/kprobes/Makefile b/arch/x86/kernel/kprobes/Makefile
new file mode 100644
index 0000000..0d33169
--- /dev/null
+++ b/arch/x86/kernel/kprobes/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for kernel probes
+#
+
+obj-$(CONFIG_KPROBES) += core.o
+obj-$(CONFIG_OPTPROBES) += opt.o
+obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o
diff --git a/arch/x86/kernel/kprobes-common.h b/arch/x86/kernel/kprobes/common.h
similarity index 90%
rename from arch/x86/kernel/kprobes-common.h
rename to arch/x86/kernel/kprobes/common.h
index 3230b68..2e9d4b5 100644
--- a/arch/x86/kernel/kprobes-common.h
+++ b/arch/x86/kernel/kprobes/common.h
@@ -99,4 +99,15 @@
return addr;
}
#endif
+
+#ifdef CONFIG_KPROBES_ON_FTRACE
+extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb);
+#else
+static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ return 0;
+}
+#endif
#endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes/core.c
similarity index 93%
rename from arch/x86/kernel/kprobes.c
rename to arch/x86/kernel/kprobes/core.c
index 57916c0..e124554 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -58,7 +58,7 @@
#include <asm/insn.h>
#include <asm/debugreg.h>
-#include "kprobes-common.h"
+#include "common.h"
void jprobe_return_end(void);
@@ -78,7 +78,7 @@
* Groups, and some special opcodes can not boost.
* This is non-const and volatile to keep gcc from statically
* optimizing it out, as variable_test_bit makes gcc think only
- * *(unsigned long*) is used.
+ * *(unsigned long*) is used.
*/
static volatile u32 twobyte_is_boostable[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
@@ -117,7 +117,7 @@
struct __arch_relative_insn {
u8 op;
s32 raddr;
- } __attribute__((packed)) *insn;
+ } __packed *insn;
insn = (struct __arch_relative_insn *)from;
insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
@@ -541,23 +541,6 @@
return 1;
}
-#ifdef KPROBES_CAN_USE_FTRACE
-static void __kprobes skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- /*
- * Emulate singlestep (and also recover regs->ip)
- * as if there is a 5byte nop
- */
- regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
- if (unlikely(p->post_handler)) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- p->post_handler(p, regs, 0);
- }
- __this_cpu_write(current_kprobe, NULL);
-}
-#endif
-
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate and they
* remain disabled throughout this function.
@@ -616,13 +599,8 @@
} else if (kprobe_running()) {
p = __this_cpu_read(current_kprobe);
if (p->break_handler && p->break_handler(p, regs)) {
-#ifdef KPROBES_CAN_USE_FTRACE
- if (kprobe_ftrace(p)) {
- skip_singlestep(p, regs, kcb);
- return 1;
- }
-#endif
- setup_singlestep(p, regs, kcb, 0);
+ if (!skip_singlestep(p, regs, kcb))
+ setup_singlestep(p, regs, kcb, 0);
return 1;
}
} /* else: not a kprobe fault; let the kernel handle it */
@@ -1075,50 +1053,6 @@
return 0;
}
-#ifdef KPROBES_CAN_USE_FTRACE
-/* Ftrace callback handler for kprobes */
-void __kprobes kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
- struct ftrace_ops *ops, struct pt_regs *regs)
-{
- struct kprobe *p;
- struct kprobe_ctlblk *kcb;
- unsigned long flags;
-
- /* Disable irq for emulating a breakpoint and avoiding preempt */
- local_irq_save(flags);
-
- p = get_kprobe((kprobe_opcode_t *)ip);
- if (unlikely(!p) || kprobe_disabled(p))
- goto end;
-
- kcb = get_kprobe_ctlblk();
- if (kprobe_running()) {
- kprobes_inc_nmissed_count(p);
- } else {
- /* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
- regs->ip = ip + sizeof(kprobe_opcode_t);
-
- __this_cpu_write(current_kprobe, p);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
- if (!p->pre_handler || !p->pre_handler(p, regs))
- skip_singlestep(p, regs, kcb);
- /*
- * If pre_handler returns !0, it sets regs->ip and
- * resets current kprobe.
- */
- }
-end:
- local_irq_restore(flags);
-}
-
-int __kprobes arch_prepare_kprobe_ftrace(struct kprobe *p)
-{
- p->ainsn.insn = NULL;
- p->ainsn.boostable = -1;
- return 0;
-}
-#endif
-
int __init arch_init_kprobes(void)
{
return arch_init_optprobes();
diff --git a/arch/x86/kernel/kprobes/ftrace.c b/arch/x86/kernel/kprobes/ftrace.c
new file mode 100644
index 0000000..23ef5c5
--- /dev/null
+++ b/arch/x86/kernel/kprobes/ftrace.c
@@ -0,0 +1,93 @@
+/*
+ * Dynamic Ftrace based Kprobes Optimization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) Hitachi Ltd., 2012
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/preempt.h>
+#include <linux/ftrace.h>
+
+#include "common.h"
+
+static int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ /*
+ * Emulate singlestep (and also recover regs->ip)
+ * as if there is a 5byte nop
+ */
+ regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
+ if (unlikely(p->post_handler)) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ p->post_handler(p, regs, 0);
+ }
+ __this_cpu_write(current_kprobe, NULL);
+ return 1;
+}
+
+int __kprobes skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ if (kprobe_ftrace(p))
+ return __skip_singlestep(p, regs, kcb);
+ else
+ return 0;
+}
+
+/* Ftrace callback handler for kprobes */
+void __kprobes kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+ struct ftrace_ops *ops, struct pt_regs *regs)
+{
+ struct kprobe *p;
+ struct kprobe_ctlblk *kcb;
+ unsigned long flags;
+
+ /* Disable irq for emulating a breakpoint and avoiding preempt */
+ local_irq_save(flags);
+
+ p = get_kprobe((kprobe_opcode_t *)ip);
+ if (unlikely(!p) || kprobe_disabled(p))
+ goto end;
+
+ kcb = get_kprobe_ctlblk();
+ if (kprobe_running()) {
+ kprobes_inc_nmissed_count(p);
+ } else {
+ /* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
+ regs->ip = ip + sizeof(kprobe_opcode_t);
+
+ __this_cpu_write(current_kprobe, p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+ if (!p->pre_handler || !p->pre_handler(p, regs))
+ __skip_singlestep(p, regs, kcb);
+ /*
+ * If pre_handler returns !0, it sets regs->ip and
+ * resets current kprobe.
+ */
+ }
+end:
+ local_irq_restore(flags);
+}
+
+int __kprobes arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+ p->ainsn.insn = NULL;
+ p->ainsn.boostable = -1;
+ return 0;
+}
diff --git a/arch/x86/kernel/kprobes-opt.c b/arch/x86/kernel/kprobes/opt.c
similarity index 99%
rename from arch/x86/kernel/kprobes-opt.c
rename to arch/x86/kernel/kprobes/opt.c
index c5e410e..76dc6f0 100644
--- a/arch/x86/kernel/kprobes-opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -37,7 +37,7 @@
#include <asm/insn.h>
#include <asm/debugreg.h>
-#include "kprobes-common.h"
+#include "common.h"
unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr)
{
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 9c2bd8b..2b44ea5 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -505,6 +505,7 @@
const struct hypervisor_x86 x86_hyper_kvm __refconst = {
.name = "KVM",
.detect = kvm_detect,
+ .x2apic_available = kvm_para_available,
};
EXPORT_SYMBOL_GPL(x86_hyper_kvm);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 2ed787f..14ae100 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -268,13 +268,7 @@
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-#ifdef CONFIG_APM_MODULE
-EXPORT_SYMBOL(pm_idle);
-#endif
+static void (*x86_idle)(void);
#ifndef CONFIG_SMP
static inline void play_dead(void)
@@ -351,7 +345,7 @@
rcu_idle_enter();
if (cpuidle_idle_call())
- pm_idle();
+ x86_idle();
rcu_idle_exit();
start_critical_timings();
@@ -375,7 +369,6 @@
*/
void default_idle(void)
{
- trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle_rcuidle(1, smp_processor_id());
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -389,21 +382,22 @@
else
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
- trace_power_end_rcuidle(smp_processor_id());
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
#endif
-bool set_pm_idle_to_default(void)
+#ifdef CONFIG_XEN
+bool xen_set_default_idle(void)
{
- bool ret = !!pm_idle;
+ bool ret = !!x86_idle;
- pm_idle = default_idle;
+ x86_idle = default_idle;
return ret;
}
+#endif
void stop_this_cpu(void *dummy)
{
local_irq_disable();
@@ -413,31 +407,8 @@
set_cpu_online(smp_processor_id(), false);
disable_local_APIC();
- for (;;) {
- if (hlt_works(smp_processor_id()))
- halt();
- }
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
- if (!need_resched()) {
- trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
- trace_cpu_idle_rcuidle(1, smp_processor_id());
- if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
- clflush((void *)¤t_thread_info()->flags);
-
- __monitor((void *)¤t_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __sti_mwait(0, 0);
- else
- local_irq_enable();
- trace_power_end_rcuidle(smp_processor_id());
- trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
- } else
- local_irq_enable();
+ for (;;)
+ halt();
}
/*
@@ -447,62 +418,13 @@
*/
static void poll_idle(void)
{
- trace_power_start_rcuidle(POWER_CSTATE, 0, smp_processor_id());
trace_cpu_idle_rcuidle(0, smp_processor_id());
local_irq_enable();
while (!need_resched())
cpu_relax();
- trace_power_end_rcuidle(smp_processor_id());
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
-/*
- * mwait selection logic:
- *
- * It depends on the CPU. For AMD CPUs that support MWAIT this is
- * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings
- * then depend on a clock divisor and current Pstate of the core. If
- * all cores of a processor are in halt state (C1) the processor can
- * enter the C1E (C1 enhanced) state. If mwait is used this will never
- * happen.
- *
- * idle=mwait overrides this decision and forces the usage of mwait.
- */
-
-#define MWAIT_INFO 0x05
-#define MWAIT_ECX_EXTENDED_INFO 0x01
-#define MWAIT_EDX_C1 0xf0
-
-int mwait_usable(const struct cpuinfo_x86 *c)
-{
- u32 eax, ebx, ecx, edx;
-
- /* Use mwait if idle=mwait boot option is given */
- if (boot_option_idle_override == IDLE_FORCE_MWAIT)
- return 1;
-
- /*
- * Any idle= boot option other than idle=mwait means that we must not
- * use mwait. Eg: idle=halt or idle=poll or idle=nomwait
- */
- if (boot_option_idle_override != IDLE_NO_OVERRIDE)
- return 0;
-
- if (c->cpuid_level < MWAIT_INFO)
- return 0;
-
- cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx);
- /* Check, whether EDX has extended info about MWAIT */
- if (!(ecx & MWAIT_ECX_EXTENDED_INFO))
- return 1;
-
- /*
- * edx enumeratios MONITOR/MWAIT extensions. Check, whether
- * C1 supports MWAIT
- */
- return (edx & MWAIT_EDX_C1);
-}
-
bool amd_e400_c1e_detected;
EXPORT_SYMBOL(amd_e400_c1e_detected);
@@ -567,31 +489,24 @@
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
- if (pm_idle == poll_idle && smp_num_siblings > 1) {
+ if (x86_idle == poll_idle && smp_num_siblings > 1)
pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
- }
#endif
- if (pm_idle)
+ if (x86_idle)
return;
- if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
- /*
- * One CPU supports mwait => All CPUs supports mwait
- */
- pr_info("using mwait in idle threads\n");
- pm_idle = mwait_idle;
- } else if (cpu_has_amd_erratum(amd_erratum_400)) {
+ if (cpu_has_amd_erratum(amd_erratum_400)) {
/* E400: APIC timer interrupt does not wake up CPU from C1e */
pr_info("using AMD E400 aware idle routine\n");
- pm_idle = amd_e400_idle;
+ x86_idle = amd_e400_idle;
} else
- pm_idle = default_idle;
+ x86_idle = default_idle;
}
void __init init_amd_e400_c1e_mask(void)
{
/* If we're using amd_e400_idle, we need to allocate amd_e400_c1e_mask. */
- if (pm_idle == amd_e400_idle)
+ if (x86_idle == amd_e400_idle)
zalloc_cpumask_var(&amd_e400_c1e_mask, GFP_KERNEL);
}
@@ -602,11 +517,8 @@
if (!strcmp(str, "poll")) {
pr_info("using polling idle threads\n");
- pm_idle = poll_idle;
+ x86_idle = poll_idle;
boot_option_idle_override = IDLE_POLL;
- } else if (!strcmp(str, "mwait")) {
- boot_option_idle_override = IDLE_FORCE_MWAIT;
- WARN_ONCE(1, "\"idle=mwait\" will be removed in 2012\n");
} else if (!strcmp(str, "halt")) {
/*
* When the boot option of idle=halt is added, halt is
@@ -615,7 +527,7 @@
* To continue to load the CPU idle driver, don't touch
* the boot_option_idle_override.
*/
- pm_idle = default_idle;
+ x86_idle = default_idle;
boot_option_idle_override = IDLE_HALT;
} else if (!strcmp(str, "nomwait")) {
/*
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index b629bbe..29a8120 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,7 +22,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/rcupdate.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/context_tracking.h>
#include <asm/uaccess.h>
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 801602b..2e8f3d3 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -149,7 +149,6 @@
if (century) {
century = bcd2bin(century);
year += century * 100;
- printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
} else
year += CMOS_YEARS_OFFS;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index ed0fe38..a6ceaed 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1369,7 +1369,7 @@
void *mwait_ptr;
struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
- if (!(this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c)))
+ if (!this_cpu_has(X86_FEATURE_MWAIT))
return;
if (!this_cpu_has(X86_FEATURE_CLFLSH))
return;
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 97ef74b..dbded5a 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -157,7 +157,7 @@
if (flags & MAP_FIXED)
return addr;
- /* for MAP_32BIT mappings we force the legact mmap base */
+ /* for MAP_32BIT mappings we force the legacy mmap base */
if (!test_thread_flag(TIF_ADDR32) && (flags & MAP_32BIT))
goto bottomup;
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 06ccb50..4b9ea10 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -623,7 +623,8 @@
ns_now = __cycles_2_ns(tsc_now);
if (cpu_khz) {
- *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+ *scale = ((NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR) +
+ cpu_khz / 2) / cpu_khz;
*offset = ns_now - mult_frac(tsc_now, *scale,
(1UL << CYC2NS_SCALE_FACTOR));
}
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index c71025b..0ba4cfb 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -680,8 +680,10 @@
if (auprobe->insn[i] == 0x66)
continue;
- if (auprobe->insn[i] == 0x90)
+ if (auprobe->insn[i] == 0x90) {
+ regs->ip += i + 1;
return true;
+ }
break;
}
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 7a3d075..d065d67 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -19,6 +19,7 @@
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/io_apic.h>
+#include <asm/hpet.h>
#include <asm/pat.h>
#include <asm/tsc.h>
#include <asm/iommu.h>
@@ -111,15 +112,22 @@
EXPORT_SYMBOL_GPL(x86_platform);
struct x86_msi_ops x86_msi = {
- .setup_msi_irqs = native_setup_msi_irqs,
- .teardown_msi_irq = native_teardown_msi_irq,
- .teardown_msi_irqs = default_teardown_msi_irqs,
- .restore_msi_irqs = default_restore_msi_irqs,
+ .setup_msi_irqs = native_setup_msi_irqs,
+ .compose_msi_msg = native_compose_msi_msg,
+ .teardown_msi_irq = native_teardown_msi_irq,
+ .teardown_msi_irqs = default_teardown_msi_irqs,
+ .restore_msi_irqs = default_restore_msi_irqs,
+ .setup_hpet_msi = default_setup_hpet_msi,
};
struct x86_io_apic_ops x86_io_apic_ops = {
- .init = native_io_apic_init_mappings,
- .read = native_io_apic_read,
- .write = native_io_apic_write,
- .modify = native_io_apic_modify,
+ .init = native_io_apic_init_mappings,
+ .read = native_io_apic_read,
+ .write = native_io_apic_write,
+ .modify = native_io_apic_modify,
+ .disable = native_disable_io_apic,
+ .print_entries = native_io_apic_print_entries,
+ .set_affinity = native_ioapic_set_affinity,
+ .setup_entry = native_setup_ioapic_entry,
+ .eoi_ioapic_pin = native_eoi_ioapic_pin,
};
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 75c9a6a..d6eeead 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -605,7 +605,7 @@
}
if (pgd_changed)
- sync_global_pgds(addr, end);
+ sync_global_pgds(addr, end - 1);
__flush_tlb_all();
@@ -984,7 +984,7 @@
}
}
- sync_global_pgds((unsigned long)start_page, end);
+ sync_global_pgds((unsigned long)start_page, end - 1);
return 0;
}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index c80b9fb..8dabbed 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -9,6 +9,7 @@
#include <linux/memblock.h>
static u64 patterns[] __initdata = {
+ /* The first entry has to be 0 to leave memtest with zeroed memory */
0,
0xffffffffffffffffULL,
0x5555555555555555ULL,
@@ -110,15 +111,8 @@
return;
printk(KERN_INFO "early_memtest: # of tests: %d\n", memtest_pattern);
- for (i = 0; i < memtest_pattern; i++) {
+ for (i = memtest_pattern-1; i < UINT_MAX; --i) {
idx = i % ARRAY_SIZE(patterns);
do_one_pass(patterns[idx], start, end);
}
-
- if (idx > 0) {
- printk(KERN_INFO "early_memtest: wipe out "
- "test pattern from memory\n");
- /* additional test with pattern 0 will do this */
- do_one_pass(0, start, end);
- }
}
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 4ddf497..cdd0da9 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -149,39 +149,40 @@
int node, pxm;
if (srat_disabled())
- return -1;
- if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
- bad_srat();
- return -1;
- }
+ goto out_err;
+ if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
+ goto out_err_bad_srat;
if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- return -1;
-
+ goto out_err;
if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
- return -1;
+ goto out_err;
+
start = ma->base_address;
end = start + ma->length;
pxm = ma->proximity_domain;
if (acpi_srat_revision <= 1)
pxm &= 0xff;
+
node = setup_node(pxm);
if (node < 0) {
printk(KERN_ERR "SRAT: Too many proximity domains.\n");
- bad_srat();
- return -1;
+ goto out_err_bad_srat;
}
- if (numa_add_memblk(node, start, end) < 0) {
- bad_srat();
- return -1;
- }
+ if (numa_add_memblk(node, start, end) < 0)
+ goto out_err_bad_srat;
node_set(node, numa_nodes_parsed);
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1);
+
return 0;
+out_err_bad_srat:
+ bad_srat();
+out_err:
+ return -1;
}
void __init acpi_numa_arch_fixup(void) {}
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 13a6b29..282375f 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -335,7 +335,7 @@
.llseek = default_llseek,
};
-static int __cpuinit create_tlb_flushall_shift(void)
+static int __init create_tlb_flushall_shift(void)
{
debugfs_create_file("tlb_flushall_shift", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlbflush);
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index fb29968..082e881 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -548,8 +548,7 @@
if (cfg->address < 0xFFFFFFFF)
return 0;
- if (!strcmp(mcfg->header.oem_id, "SGI") ||
- !strcmp(mcfg->header.oem_id, "SGI2"))
+ if (!strncmp(mcfg->header.oem_id, "SGI", 3))
return 0;
if (mcfg->header.revision >= 1) {
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 8d87439..01e0231 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -2,10 +2,12 @@
obj-y += ce4100/
obj-y += efi/
obj-y += geode/
+obj-y += goldfish/
obj-y += iris/
obj-y += mrst/
obj-y += olpc/
obj-y += scx200/
obj-y += sfi/
+obj-y += ts5500/
obj-y += visws/
obj-y += uv/
diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c
index d9c1b95..7145ec6 100644
--- a/arch/x86/platform/efi/efi-bgrt.c
+++ b/arch/x86/platform/efi/efi-bgrt.c
@@ -11,20 +11,21 @@
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/efi-bgrt.h>
struct acpi_table_bgrt *bgrt_tab;
-void *bgrt_image;
-size_t bgrt_image_size;
+void *__initdata bgrt_image;
+size_t __initdata bgrt_image_size;
struct bmp_header {
u16 id;
u32 size;
} __packed;
-void efi_bgrt_init(void)
+void __init efi_bgrt_init(void)
{
acpi_status status;
void __iomem *image;
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 77cf009..928bf83 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -87,7 +87,7 @@
static int __init setup_noefi(char *arg)
{
- clear_bit(EFI_BOOT, &x86_efi_facility);
+ clear_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
return 0;
}
early_param("noefi", setup_noefi);
diff --git a/arch/x86/platform/goldfish/Makefile b/arch/x86/platform/goldfish/Makefile
new file mode 100644
index 0000000..f030b53
--- /dev/null
+++ b/arch/x86/platform/goldfish/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_GOLDFISH) += goldfish.o
diff --git a/arch/x86/platform/goldfish/goldfish.c b/arch/x86/platform/goldfish/goldfish.c
new file mode 100644
index 0000000..1693107
--- /dev/null
+++ b/arch/x86/platform/goldfish/goldfish.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2011 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+/*
+ * Where in virtual device memory the IO devices (timers, system controllers
+ * and so on)
+ */
+
+#define GOLDFISH_PDEV_BUS_BASE (0xff001000)
+#define GOLDFISH_PDEV_BUS_END (0xff7fffff)
+#define GOLDFISH_PDEV_BUS_IRQ (4)
+
+#define GOLDFISH_TTY_BASE (0x2000)
+
+static struct resource goldfish_pdev_bus_resources[] = {
+ {
+ .start = GOLDFISH_PDEV_BUS_BASE,
+ .end = GOLDFISH_PDEV_BUS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = GOLDFISH_PDEV_BUS_IRQ,
+ .end = GOLDFISH_PDEV_BUS_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static int __init goldfish_init(void)
+{
+ platform_device_register_simple("goldfish_pdev_bus", -1,
+ goldfish_pdev_bus_resources, 2);
+ return 0;
+}
+device_initcall(goldfish_init);
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index 2fdca25..fef7d0b 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -195,7 +195,7 @@
return r;
}
-static int xo15_sci_remove(struct acpi_device *device, int type)
+static int xo15_sci_remove(struct acpi_device *device)
{
acpi_disable_gpe(NULL, xo15_sci_gpe);
acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index 7785b72..bcd1a70 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -35,7 +35,7 @@
static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
/* All CPUs enumerated by SFI must be present and enabled */
-static void __cpuinit mp_sfi_register_lapic(u8 id)
+static void __init mp_sfi_register_lapic(u8 id)
{
if (MAX_LOCAL_APIC - id <= 0) {
pr_warning("Processor #%d invalid (max %d)\n",
diff --git a/arch/x86/platform/ts5500/Makefile b/arch/x86/platform/ts5500/Makefile
new file mode 100644
index 0000000..c54e348
--- /dev/null
+++ b/arch/x86/platform/ts5500/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_TS5500) += ts5500.o
diff --git a/arch/x86/platform/ts5500/ts5500.c b/arch/x86/platform/ts5500/ts5500.c
new file mode 100644
index 0000000..39febb2
--- /dev/null
+++ b/arch/x86/platform/ts5500/ts5500.c
@@ -0,0 +1,339 @@
+/*
+ * Technologic Systems TS-5500 Single Board Computer support
+ *
+ * Copyright (C) 2013 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ *
+ * This driver registers the Technologic Systems TS-5500 Single Board Computer
+ * (SBC) and its devices, and exposes information to userspace such as jumpers'
+ * state or available options. For further information about sysfs entries, see
+ * Documentation/ABI/testing/sysfs-platform-ts5500.
+ *
+ * This code actually supports the TS-5500 platform, but it may be extended to
+ * support similar Technologic Systems x86-based platforms, such as the TS-5600.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio-ts5500.h>
+#include <linux/platform_data/max197.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Product code register */
+#define TS5500_PRODUCT_CODE_ADDR 0x74
+#define TS5500_PRODUCT_CODE 0x60 /* TS-5500 product code */
+
+/* SRAM/RS-485/ADC options, and RS-485 RTS/Automatic RS-485 flags register */
+#define TS5500_SRAM_RS485_ADC_ADDR 0x75
+#define TS5500_SRAM BIT(0) /* SRAM option */
+#define TS5500_RS485 BIT(1) /* RS-485 option */
+#define TS5500_ADC BIT(2) /* A/D converter option */
+#define TS5500_RS485_RTS BIT(6) /* RTS for RS-485 */
+#define TS5500_RS485_AUTO BIT(7) /* Automatic RS-485 */
+
+/* External Reset/Industrial Temperature Range options register */
+#define TS5500_ERESET_ITR_ADDR 0x76
+#define TS5500_ERESET BIT(0) /* External Reset option */
+#define TS5500_ITR BIT(1) /* Indust. Temp. Range option */
+
+/* LED/Jumpers register */
+#define TS5500_LED_JP_ADDR 0x77
+#define TS5500_LED BIT(0) /* LED flag */
+#define TS5500_JP1 BIT(1) /* Automatic CMOS */
+#define TS5500_JP2 BIT(2) /* Enable Serial Console */
+#define TS5500_JP3 BIT(3) /* Write Enable Drive A */
+#define TS5500_JP4 BIT(4) /* Fast Console (115K baud) */
+#define TS5500_JP5 BIT(5) /* User Jumper */
+#define TS5500_JP6 BIT(6) /* Console on COM1 (req. JP2) */
+#define TS5500_JP7 BIT(7) /* Undocumented (Unused) */
+
+/* A/D Converter registers */
+#define TS5500_ADC_CONV_BUSY_ADDR 0x195 /* Conversion state register */
+#define TS5500_ADC_CONV_BUSY BIT(0)
+#define TS5500_ADC_CONV_INIT_LSB_ADDR 0x196 /* Start conv. / LSB register */
+#define TS5500_ADC_CONV_MSB_ADDR 0x197 /* MSB register */
+#define TS5500_ADC_CONV_DELAY 12 /* usec */
+
+/**
+ * struct ts5500_sbc - TS-5500 board description
+ * @id: Board product ID.
+ * @sram: Flag for SRAM option.
+ * @rs485: Flag for RS-485 option.
+ * @adc: Flag for Analog/Digital converter option.
+ * @ereset: Flag for External Reset option.
+ * @itr: Flag for Industrial Temperature Range option.
+ * @jumpers: Bitfield for jumpers' state.
+ */
+struct ts5500_sbc {
+ int id;
+ bool sram;
+ bool rs485;
+ bool adc;
+ bool ereset;
+ bool itr;
+ u8 jumpers;
+};
+
+/* Board signatures in BIOS shadow RAM */
+static const struct {
+ const char * const string;
+ const ssize_t offset;
+} ts5500_signatures[] __initdata = {
+ { "TS-5x00 AMD Elan", 0xb14 },
+};
+
+static int __init ts5500_check_signature(void)
+{
+ void __iomem *bios;
+ int i, ret = -ENODEV;
+
+ bios = ioremap(0xf0000, 0x10000);
+ if (!bios)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(ts5500_signatures); i++) {
+ if (check_signature(bios + ts5500_signatures[i].offset,
+ ts5500_signatures[i].string,
+ strlen(ts5500_signatures[i].string))) {
+ ret = 0;
+ break;
+ }
+ }
+
+ iounmap(bios);
+ return ret;
+}
+
+static int __init ts5500_detect_config(struct ts5500_sbc *sbc)
+{
+ u8 tmp;
+ int ret = 0;
+
+ if (!request_region(TS5500_PRODUCT_CODE_ADDR, 4, "ts5500"))
+ return -EBUSY;
+
+ tmp = inb(TS5500_PRODUCT_CODE_ADDR);
+ if (tmp != TS5500_PRODUCT_CODE) {
+ pr_err("This platform is not a TS-5500 (found ID 0x%x)\n", tmp);
+ ret = -ENODEV;
+ goto cleanup;
+ }
+ sbc->id = tmp;
+
+ tmp = inb(TS5500_SRAM_RS485_ADC_ADDR);
+ sbc->sram = tmp & TS5500_SRAM;
+ sbc->rs485 = tmp & TS5500_RS485;
+ sbc->adc = tmp & TS5500_ADC;
+
+ tmp = inb(TS5500_ERESET_ITR_ADDR);
+ sbc->ereset = tmp & TS5500_ERESET;
+ sbc->itr = tmp & TS5500_ITR;
+
+ tmp = inb(TS5500_LED_JP_ADDR);
+ sbc->jumpers = tmp & ~TS5500_LED;
+
+cleanup:
+ release_region(TS5500_PRODUCT_CODE_ADDR, 4);
+ return ret;
+}
+
+static ssize_t ts5500_show_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ts5500_sbc *sbc = dev_get_drvdata(dev);
+
+ return sprintf(buf, "0x%.2x\n", sbc->id);
+}
+
+static ssize_t ts5500_show_jumpers(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ts5500_sbc *sbc = dev_get_drvdata(dev);
+
+ return sprintf(buf, "0x%.2x\n", sbc->jumpers >> 1);
+}
+
+#define TS5500_SHOW(field) \
+ static ssize_t ts5500_show_##field(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+ { \
+ struct ts5500_sbc *sbc = dev_get_drvdata(dev); \
+ return sprintf(buf, "%d\n", sbc->field); \
+ }
+
+TS5500_SHOW(sram)
+TS5500_SHOW(rs485)
+TS5500_SHOW(adc)
+TS5500_SHOW(ereset)
+TS5500_SHOW(itr)
+
+static DEVICE_ATTR(id, S_IRUGO, ts5500_show_id, NULL);
+static DEVICE_ATTR(jumpers, S_IRUGO, ts5500_show_jumpers, NULL);
+static DEVICE_ATTR(sram, S_IRUGO, ts5500_show_sram, NULL);
+static DEVICE_ATTR(rs485, S_IRUGO, ts5500_show_rs485, NULL);
+static DEVICE_ATTR(adc, S_IRUGO, ts5500_show_adc, NULL);
+static DEVICE_ATTR(ereset, S_IRUGO, ts5500_show_ereset, NULL);
+static DEVICE_ATTR(itr, S_IRUGO, ts5500_show_itr, NULL);
+
+static struct attribute *ts5500_attributes[] = {
+ &dev_attr_id.attr,
+ &dev_attr_jumpers.attr,
+ &dev_attr_sram.attr,
+ &dev_attr_rs485.attr,
+ &dev_attr_adc.attr,
+ &dev_attr_ereset.attr,
+ &dev_attr_itr.attr,
+ NULL
+};
+
+static const struct attribute_group ts5500_attr_group = {
+ .attrs = ts5500_attributes,
+};
+
+static struct resource ts5500_dio1_resource[] = {
+ DEFINE_RES_IRQ_NAMED(7, "DIO1 interrupt"),
+};
+
+static struct platform_device ts5500_dio1_pdev = {
+ .name = "ts5500-dio1",
+ .id = -1,
+ .resource = ts5500_dio1_resource,
+ .num_resources = 1,
+};
+
+static struct resource ts5500_dio2_resource[] = {
+ DEFINE_RES_IRQ_NAMED(6, "DIO2 interrupt"),
+};
+
+static struct platform_device ts5500_dio2_pdev = {
+ .name = "ts5500-dio2",
+ .id = -1,
+ .resource = ts5500_dio2_resource,
+ .num_resources = 1,
+};
+
+static void ts5500_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ outb(!!brightness, TS5500_LED_JP_ADDR);
+}
+
+static enum led_brightness ts5500_led_get(struct led_classdev *led_cdev)
+{
+ return (inb(TS5500_LED_JP_ADDR) & TS5500_LED) ? LED_FULL : LED_OFF;
+}
+
+static struct led_classdev ts5500_led_cdev = {
+ .name = "ts5500:green:",
+ .brightness_set = ts5500_led_set,
+ .brightness_get = ts5500_led_get,
+};
+
+static int ts5500_adc_convert(u8 ctrl)
+{
+ u8 lsb, msb;
+
+ /* Start conversion (ensure the 3 MSB are set to 0) */
+ outb(ctrl & 0x1f, TS5500_ADC_CONV_INIT_LSB_ADDR);
+
+ /*
+ * The platform has CPLD logic driving the A/D converter.
+ * The conversion must complete within 11 microseconds,
+ * otherwise we have to re-initiate a conversion.
+ */
+ udelay(TS5500_ADC_CONV_DELAY);
+ if (inb(TS5500_ADC_CONV_BUSY_ADDR) & TS5500_ADC_CONV_BUSY)
+ return -EBUSY;
+
+ /* Read the raw data */
+ lsb = inb(TS5500_ADC_CONV_INIT_LSB_ADDR);
+ msb = inb(TS5500_ADC_CONV_MSB_ADDR);
+
+ return (msb << 8) | lsb;
+}
+
+static struct max197_platform_data ts5500_adc_pdata = {
+ .convert = ts5500_adc_convert,
+};
+
+static struct platform_device ts5500_adc_pdev = {
+ .name = "max197",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts5500_adc_pdata,
+ },
+};
+
+static int __init ts5500_init(void)
+{
+ struct platform_device *pdev;
+ struct ts5500_sbc *sbc;
+ int err;
+
+ /*
+ * There is no DMI available or PCI bridge subvendor info,
+ * only the BIOS provides a 16-bit identification call.
+ * It is safer to find a signature in the BIOS shadow RAM.
+ */
+ err = ts5500_check_signature();
+ if (err)
+ return err;
+
+ pdev = platform_device_register_simple("ts5500", -1, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ sbc = devm_kzalloc(&pdev->dev, sizeof(struct ts5500_sbc), GFP_KERNEL);
+ if (!sbc) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ err = ts5500_detect_config(sbc);
+ if (err)
+ goto error;
+
+ platform_set_drvdata(pdev, sbc);
+
+ err = sysfs_create_group(&pdev->dev.kobj, &ts5500_attr_group);
+ if (err)
+ goto error;
+
+ ts5500_dio1_pdev.dev.parent = &pdev->dev;
+ if (platform_device_register(&ts5500_dio1_pdev))
+ dev_warn(&pdev->dev, "DIO1 block registration failed\n");
+ ts5500_dio2_pdev.dev.parent = &pdev->dev;
+ if (platform_device_register(&ts5500_dio2_pdev))
+ dev_warn(&pdev->dev, "DIO2 block registration failed\n");
+
+ if (led_classdev_register(&pdev->dev, &ts5500_led_cdev))
+ dev_warn(&pdev->dev, "LED registration failed\n");
+
+ if (sbc->adc) {
+ ts5500_adc_pdev.dev.parent = &pdev->dev;
+ if (platform_device_register(&ts5500_adc_pdev))
+ dev_warn(&pdev->dev, "ADC registration failed\n");
+ }
+
+ return 0;
+error:
+ platform_device_unregister(pdev);
+ return err;
+}
+device_initcall(ts5500_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 platform driver");
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index dbbdca5..0f92173 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1467,7 +1467,7 @@
}
if (input_arg == 0) {
- elements = sizeof(stat_description)/sizeof(*stat_description);
+ elements = ARRAY_SIZE(stat_description);
printk(KERN_DEBUG "# cpu: cpu number\n");
printk(KERN_DEBUG "Sender statistics:\n");
for (i = 0; i < elements; i++)
@@ -1508,7 +1508,7 @@
char *q;
int cnt = 0;
int val;
- int e = sizeof(tunables) / sizeof(*tunables);
+ int e = ARRAY_SIZE(tunables);
p = instr + strspn(instr, WHITESPACE);
q = p;
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 5032e0d..98718f6 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -15,7 +15,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Copyright (c) 2009 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2009-2013 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) Dimitri Sivanich
*/
#include <linux/clockchips.h>
@@ -102,9 +102,10 @@
if (is_uv1_hub())
return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) &
UV1H_EVENT_OCCURRED0_RTC1_MASK;
- else
- return uv_read_global_mmr64(pnode, UV2H_EVENT_OCCURRED2) &
- UV2H_EVENT_OCCURRED2_RTC_1_MASK;
+ else if (is_uvx_hub())
+ return uv_read_global_mmr64(pnode, UVXH_EVENT_OCCURRED2) &
+ UVXH_EVENT_OCCURRED2_RTC_1_MASK;
+ return 0;
}
/* Setup interrupt and return non-zero if early expiration occurred. */
@@ -122,8 +123,8 @@
uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
UV1H_EVENT_OCCURRED0_RTC1_MASK);
else
- uv_write_global_mmr64(pnode, UV2H_EVENT_OCCURRED2_ALIAS,
- UV2H_EVENT_OCCURRED2_RTC_1_MASK);
+ uv_write_global_mmr64(pnode, UVXH_EVENT_OCCURRED2_ALIAS,
+ UVXH_EVENT_OCCURRED2_RTC_1_MASK);
val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
diff --git a/arch/x86/um/fault.c b/arch/x86/um/fault.c
index 8784ab3..84ac7f7 100644
--- a/arch/x86/um/fault.c
+++ b/arch/x86/um/fault.c
@@ -20,7 +20,7 @@
const struct exception_table_entry *fixup;
fixup = search_exception_tables(address);
- if (fixup != 0) {
+ if (fixup) {
UPT_IP(regs) = fixup->fixup;
return 1;
}
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 205ad32..c74436e 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -60,7 +60,7 @@
static notrace cycle_t vread_hpet(void)
{
- return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
+ return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + HPET_COUNTER);
}
#ifdef CONFIG_PARAVIRT_CLOCK
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 138e566..39928d1 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1517,72 +1517,51 @@
#endif
}
-#ifdef CONFIG_XEN_PVHVM
-#define HVM_SHARED_INFO_ADDR 0xFE700000UL
-static struct shared_info *xen_hvm_shared_info;
-static unsigned long xen_hvm_sip_phys;
-static int xen_major, xen_minor;
-
-static void xen_hvm_connect_shared_info(unsigned long pfn)
+void __ref xen_hvm_init_shared_info(void)
{
+ int cpu;
struct xen_add_to_physmap xatp;
+ static struct shared_info *shared_info_page = 0;
+ if (!shared_info_page)
+ shared_info_page = (struct shared_info *)
+ extend_brk(PAGE_SIZE, PAGE_SIZE);
xatp.domid = DOMID_SELF;
xatp.idx = 0;
xatp.space = XENMAPSPACE_shared_info;
- xatp.gpfn = pfn;
+ xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
BUG();
-}
-static void __init xen_hvm_set_shared_info(struct shared_info *sip)
-{
- int cpu;
-
- HYPERVISOR_shared_info = sip;
+ HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
* page, we use it in the event channel upcall and in some pvclock
* related functions. We don't need the vcpu_info placement
* optimizations because we don't use any pv_mmu or pv_irq op on
- * HVM. */
- for_each_online_cpu(cpu)
+ * HVM.
+ * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is
+ * online but xen_hvm_init_shared_info is run at resume time too and
+ * in that case multiple vcpus might be online. */
+ for_each_online_cpu(cpu) {
per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
-}
-
-/* Reconnect the shared_info pfn to a (new) mfn */
-void xen_hvm_resume_shared_info(void)
-{
- xen_hvm_connect_shared_info(xen_hvm_sip_phys >> PAGE_SHIFT);
-}
-
-/* Xen tools prior to Xen 4 do not provide a E820_Reserved area for guest usage.
- * On these old tools the shared info page will be placed in E820_Ram.
- * Xen 4 provides a E820_Reserved area at 0xFC000000, and this code expects
- * that nothing is mapped up to HVM_SHARED_INFO_ADDR.
- * Xen 4.3+ provides an explicit 1MB area at HVM_SHARED_INFO_ADDR which is used
- * here for the shared info page. */
-static void __init xen_hvm_init_shared_info(void)
-{
- if (xen_major < 4) {
- xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE);
- xen_hvm_sip_phys = __pa(xen_hvm_shared_info);
- } else {
- xen_hvm_sip_phys = HVM_SHARED_INFO_ADDR;
- set_fixmap(FIX_PARAVIRT_BOOTMAP, xen_hvm_sip_phys);
- xen_hvm_shared_info =
- (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
}
- xen_hvm_connect_shared_info(xen_hvm_sip_phys >> PAGE_SHIFT);
- xen_hvm_set_shared_info(xen_hvm_shared_info);
}
+#ifdef CONFIG_XEN_PVHVM
static void __init init_hvm_pv_info(void)
{
- uint32_t ecx, edx, pages, msr, base;
+ int major, minor;
+ uint32_t eax, ebx, ecx, edx, pages, msr, base;
u64 pfn;
base = xen_cpuid_base();
+ cpuid(base + 1, &eax, &ebx, &ecx, &edx);
+
+ major = eax >> 16;
+ minor = eax & 0xffff;
+ printk(KERN_INFO "Xen version %d.%d.\n", major, minor);
+
cpuid(base + 2, &pages, &msr, &ecx, &edx);
pfn = __pa(hypercall_page);
@@ -1633,22 +1612,12 @@
static bool __init xen_hvm_platform(void)
{
- uint32_t eax, ebx, ecx, edx, base;
-
if (xen_pv_domain())
return false;
- base = xen_cpuid_base();
- if (!base)
+ if (!xen_cpuid_base())
return false;
- cpuid(base + 1, &eax, &ebx, &ecx, &edx);
-
- xen_major = eax >> 16;
- xen_minor = eax & 0xffff;
-
- printk(KERN_INFO "Xen version %d.%d.\n", xen_major, xen_minor);
-
return true;
}
@@ -1668,6 +1637,7 @@
.name = "Xen HVM",
.detect = xen_hvm_platform,
.init_platform = xen_hvm_guest_init,
+ .x2apic_available = xen_x2apic_para_available,
};
EXPORT_SYMBOL(x86_hyper_xen_hvm);
#endif
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 8971a26..94eac5c 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -556,12 +556,9 @@
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
/* Set up idle, making sure it calls safe_halt() pvop */
-#ifdef CONFIG_X86_32
- boot_cpu_data.hlt_works_ok = 1;
-#endif
disable_cpuidle();
disable_cpufreq();
- WARN_ON(set_pm_idle_to_default());
+ WARN_ON(xen_set_default_idle());
fiddle_vdso();
#ifdef CONFIG_NUMA
numa_off = 1;
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index ae8a00c..45329c8 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -30,7 +30,7 @@
{
#ifdef CONFIG_XEN_PVHVM
int cpu;
- xen_hvm_resume_shared_info();
+ xen_hvm_init_shared_info();
xen_callback_vector();
xen_unplug_emulated_devices();
if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index f9643fc..33ca6e4 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -89,11 +89,11 @@
*/
#ifdef CONFIG_SMP
GET_THREAD_INFO(%eax)
- movl TI_cpu(%eax), %eax
- movl __per_cpu_offset(,%eax,4), %eax
- mov xen_vcpu(%eax), %eax
+ movl %ss:TI_cpu(%eax), %eax
+ movl %ss:__per_cpu_offset(,%eax,4), %eax
+ mov %ss:xen_vcpu(%eax), %eax
#else
- movl xen_vcpu, %eax
+ movl %ss:xen_vcpu, %eax
#endif
/* check IF state we're restoring */
@@ -106,11 +106,11 @@
* resuming the code, so we don't have to be worried about
* being preempted to another CPU.
*/
- setz XEN_vcpu_info_mask(%eax)
+ setz %ss:XEN_vcpu_info_mask(%eax)
xen_iret_start_crit:
/* check for unmasked and pending */
- cmpw $0x0001, XEN_vcpu_info_pending(%eax)
+ cmpw $0x0001, %ss:XEN_vcpu_info_pending(%eax)
/*
* If there's something pending, mask events again so we can
@@ -118,7 +118,7 @@
* touch XEN_vcpu_info_mask.
*/
jne 1f
- movb $1, XEN_vcpu_info_mask(%eax)
+ movb $1, %ss:XEN_vcpu_info_mask(%eax)
1: popl %eax
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index d2e73d1..a95b417 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -40,7 +40,7 @@
void xen_vcpu_restore(void);
void xen_callback_vector(void);
-void xen_hvm_resume_shared_info(void);
+void xen_hvm_init_shared_info(void);
void xen_unplug_emulated_devices(void);
void __init xen_build_dynamic_phys_to_machine(void);
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 74638ec..c88202f 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -5,6 +5,7 @@
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/sched/sysctl.h>
#include "blk.h"
diff --git a/block/elevator.c b/block/elevator.c
index 9edba1b..603b2c1 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -100,14 +100,14 @@
module_put(e->elevator_owner);
}
-static struct elevator_type *elevator_get(const char *name)
+static struct elevator_type *elevator_get(const char *name, bool try_loading)
{
struct elevator_type *e;
spin_lock(&elv_list_lock);
e = elevator_find(name);
- if (!e) {
+ if (!e && try_loading) {
spin_unlock(&elv_list_lock);
request_module("%s-iosched", name);
spin_lock(&elv_list_lock);
@@ -136,6 +136,22 @@
__setup("elevator=", elevator_setup);
+/* called during boot to load the elevator chosen by the elevator param */
+void __init load_default_elevator_module(void)
+{
+ struct elevator_type *e;
+
+ if (!chosen_elevator[0])
+ return;
+
+ spin_lock(&elv_list_lock);
+ e = elevator_find(chosen_elevator);
+ spin_unlock(&elv_list_lock);
+
+ if (!e)
+ request_module("%s-iosched", chosen_elevator);
+}
+
static struct kobj_type elv_ktype;
static struct elevator_queue *elevator_alloc(struct request_queue *q,
@@ -191,25 +207,30 @@
q->boundary_rq = NULL;
if (name) {
- e = elevator_get(name);
+ e = elevator_get(name, true);
if (!e)
return -EINVAL;
}
+ /*
+ * Use the default elevator specified by config boot param or
+ * config option. Don't try to load modules as we could be running
+ * off async and request_module() isn't allowed from async.
+ */
if (!e && *chosen_elevator) {
- e = elevator_get(chosen_elevator);
+ e = elevator_get(chosen_elevator, false);
if (!e)
printk(KERN_ERR "I/O scheduler %s not found\n",
chosen_elevator);
}
if (!e) {
- e = elevator_get(CONFIG_DEFAULT_IOSCHED);
+ e = elevator_get(CONFIG_DEFAULT_IOSCHED, false);
if (!e) {
printk(KERN_ERR
"Default I/O scheduler not found. " \
"Using noop.\n");
- e = elevator_get("noop");
+ e = elevator_get("noop", false);
}
}
@@ -951,7 +972,7 @@
return -ENXIO;
strlcpy(elevator_name, name, sizeof(elevator_name));
- e = elevator_get(strstrip(elevator_name));
+ e = elevator_get(strstrip(elevator_name), true);
if (!e) {
printk(KERN_ERR "elevator: type %s not found\n", elevator_name);
return -EINVAL;
diff --git a/drivers/Kconfig b/drivers/Kconfig
index f5fb072..2b4e89b 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -134,6 +134,8 @@
source "drivers/clocksource/Kconfig"
+source "drivers/mailbox/Kconfig"
+
source "drivers/iommu/Kconfig"
source "drivers/remoteproc/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 7863b9f..a8d32f1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -130,6 +130,7 @@
#common clk code
obj-y += clk/
+obj-$(CONFIG_MAILBOX) += mailbox/
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
obj-$(CONFIG_NFC) += nfc/
obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 38c5078..78105b3 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -337,7 +337,7 @@
systems require this timer.
config ACPI_CONTAINER
- tristate "Container and Module Devices (EXPERIMENTAL)"
+ bool "Container and Module Devices (EXPERIMENTAL)"
depends on EXPERIMENTAL
default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
help
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 2a4502b..474fcfeb 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -37,7 +37,8 @@
acpi-y += processor_core.o
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
-acpi-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
+acpi-y += pci_root.o pci_link.o pci_irq.o
+acpi-y += csrt.o
acpi-y += acpi_platform.o
acpi-y += power.o
acpi-y += event.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index d5fdd36..6d5bf64 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -60,7 +60,7 @@
#endif
static int acpi_ac_add(struct acpi_device *device);
-static int acpi_ac_remove(struct acpi_device *device, int type);
+static int acpi_ac_remove(struct acpi_device *device);
static void acpi_ac_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id ac_device_ids[] = {
@@ -337,7 +337,7 @@
}
#endif
-static int acpi_ac_remove(struct acpi_device *device, int type)
+static int acpi_ac_remove(struct acpi_device *device)
{
struct acpi_ac *ac = NULL;
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index b679bf8..034d3e7 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -54,7 +54,7 @@
#define MEMORY_POWER_OFF_STATE 2
static int acpi_memory_device_add(struct acpi_device *device);
-static int acpi_memory_device_remove(struct acpi_device *device, int type);
+static int acpi_memory_device_remove(struct acpi_device *device);
static const struct acpi_device_id memory_device_ids[] = {
{ACPI_MEMORY_DEVICE_HID, 0},
@@ -153,51 +153,46 @@
return 0;
}
-static int
-acpi_memory_get_device(acpi_handle handle,
- struct acpi_memory_device **mem_device)
+static int acpi_memory_get_device(acpi_handle handle,
+ struct acpi_memory_device **mem_device)
{
- acpi_status status;
- acpi_handle phandle;
struct acpi_device *device = NULL;
- struct acpi_device *pdevice = NULL;
- int result;
+ int result = 0;
+ acpi_scan_lock_acquire();
- if (!acpi_bus_get_device(handle, &device) && device)
+ acpi_bus_get_device(handle, &device);
+ if (device)
goto end;
- status = acpi_get_parent(handle, &phandle);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot find acpi parent"));
- return -EINVAL;
- }
-
- /* Get the parent device */
- result = acpi_bus_get_device(phandle, &pdevice);
- if (result) {
- acpi_handle_warn(phandle, "Cannot get acpi bus device\n");
- return -EINVAL;
- }
-
/*
* Now add the notified device. This creates the acpi_device
* and invokes .add function
*/
- result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
+ result = acpi_bus_scan(handle);
if (result) {
- acpi_handle_warn(handle, "Cannot add acpi bus\n");
- return -EINVAL;
+ acpi_handle_warn(handle, "ACPI namespace scan failed\n");
+ result = -EINVAL;
+ goto out;
+ }
+ result = acpi_bus_get_device(handle, &device);
+ if (result) {
+ acpi_handle_warn(handle, "Missing device object\n");
+ result = -EINVAL;
+ goto out;
}
- end:
+ end:
*mem_device = acpi_driver_data(device);
if (!(*mem_device)) {
dev_err(&device->dev, "driver data not found\n");
- return -ENODEV;
+ result = -ENODEV;
+ goto out;
}
- return 0;
+ out:
+ acpi_scan_lock_release();
+ return result;
}
static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
@@ -317,6 +312,7 @@
struct acpi_device *device;
struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
+ acpi_status status;
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
@@ -339,29 +335,40 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived EJECT REQUEST notification for device\n"));
+ status = AE_ERROR;
+ acpi_scan_lock_acquire();
+
if (acpi_bus_get_device(handle, &device)) {
acpi_handle_err(handle, "Device doesn't exist\n");
- break;
+ goto unlock;
}
mem_device = acpi_driver_data(device);
if (!mem_device) {
acpi_handle_err(handle, "Driver Data is NULL\n");
- break;
+ goto unlock;
}
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
if (!ej_event) {
pr_err(PREFIX "No memory, dropping EJECT\n");
- break;
+ goto unlock;
}
- ej_event->handle = handle;
+ get_device(&device->dev);
+ ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
- (void *)ej_event);
+ /* The eject is carried out asynchronously. */
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ ej_event);
+ if (ACPI_FAILURE(status)) {
+ put_device(&device->dev);
+ kfree(ej_event);
+ }
- /* eject is performed asynchronously */
- return;
+ unlock:
+ acpi_scan_lock_release();
+ if (ACPI_SUCCESS(status))
+ return;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
@@ -372,7 +379,6 @@
/* Inform firmware that the hotplug operation has completed */
(void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
- return;
}
static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
@@ -427,7 +433,7 @@
return result;
}
-static int acpi_memory_device_remove(struct acpi_device *device, int type)
+static int acpi_memory_device_remove(struct acpi_device *device)
{
struct acpi_memory_device *mem_device = NULL;
int result;
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index 16fa979..31de104 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -482,8 +482,7 @@
return 0;
}
-static int acpi_pad_remove(struct acpi_device *device,
- int type)
+static int acpi_pad_remove(struct acpi_device *device)
{
mutex_lock(&isolated_cpus_lock);
acpi_pad_idle_cpus(0);
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index db129b9..26fce4b 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -13,6 +13,7 @@
#include <linux/acpi.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -21,18 +22,59 @@
ACPI_MODULE_NAME("platform");
+/* Flags for acpi_create_platform_device */
+#define ACPI_PLATFORM_CLK BIT(0)
+
+/*
+ * The following ACPI IDs are known to be suitable for representing as
+ * platform devices.
+ */
+static const struct acpi_device_id acpi_platform_device_ids[] = {
+
+ { "PNP0D40" },
+
+ /* Haswell LPSS devices */
+ { "INT33C0", ACPI_PLATFORM_CLK },
+ { "INT33C1", ACPI_PLATFORM_CLK },
+ { "INT33C2", ACPI_PLATFORM_CLK },
+ { "INT33C3", ACPI_PLATFORM_CLK },
+ { "INT33C4", ACPI_PLATFORM_CLK },
+ { "INT33C5", ACPI_PLATFORM_CLK },
+ { "INT33C6", ACPI_PLATFORM_CLK },
+ { "INT33C7", ACPI_PLATFORM_CLK },
+
+ { }
+};
+
+static int acpi_create_platform_clks(struct acpi_device *adev)
+{
+ static struct platform_device *pdev;
+
+ /* Create Lynxpoint LPSS clocks */
+ if (!pdev && !strncmp(acpi_device_hid(adev), "INT33C", 6)) {
+ pdev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ }
+
+ return 0;
+}
+
/**
* acpi_create_platform_device - Create platform device for ACPI device node
* @adev: ACPI device node to create a platform device for.
+ * @id: ACPI device ID used to match @adev.
*
* Check if the given @adev can be represented as a platform device and, if
* that's the case, create and register a platform device, populate its common
* resources and returns a pointer to it. Otherwise, return %NULL.
*
- * The platform device's name will be taken from the @adev's _HID and _UID.
+ * Name of the platform device will be the same as @adev's.
*/
-struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
+static int acpi_create_platform_device(struct acpi_device *adev,
+ const struct acpi_device_id *id)
{
+ unsigned long flags = id->driver_data;
struct platform_device *pdev = NULL;
struct acpi_device *acpi_parent;
struct platform_device_info pdevinfo;
@@ -41,20 +83,28 @@
struct resource *resources;
int count;
+ if (flags & ACPI_PLATFORM_CLK) {
+ int ret = acpi_create_platform_clks(adev);
+ if (ret) {
+ dev_err(&adev->dev, "failed to create clocks\n");
+ return ret;
+ }
+ }
+
/* If the ACPI node already has a physical device attached, skip it. */
if (adev->physical_node_count)
- return NULL;
+ return 0;
INIT_LIST_HEAD(&resource_list);
count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (count <= 0)
- return NULL;
+ return 0;
resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
if (!resources) {
dev_err(&adev->dev, "No memory for resources\n");
acpi_dev_free_resource_list(&resource_list);
- return NULL;
+ return -ENOMEM;
}
count = 0;
list_for_each_entry(rentry, &resource_list, node)
@@ -100,5 +150,15 @@
}
kfree(resources);
- return pdev;
+ return 1;
+}
+
+static struct acpi_scan_handler platform_handler = {
+ .ids = acpi_platform_device_ids,
+ .attach = acpi_create_platform_device,
+};
+
+void __init acpi_platform_init(void)
+{
+ acpi_scan_add_handler(&platform_handler);
}
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index bc7a03d..a1b9bf5 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -31,6 +31,7 @@
evgpeinit.o \
evgpeutil.o \
evglock.o \
+ evhandler.o \
evmisc.o \
evregion.o \
evrgnini.o \
@@ -90,6 +91,7 @@
nsobject.o \
nsparse.o \
nspredef.o \
+ nsprepkg.o \
nsrepair.o \
nsrepair2.o \
nssearch.o \
@@ -104,7 +106,9 @@
acpi-y += \
psargs.o \
psloop.o \
+ psobject.o \
psopcode.o \
+ psopinfo.o \
psparse.o \
psscope.o \
pstree.o \
@@ -126,7 +130,7 @@
rsutils.o \
rsxface.o
-acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o rsdumpinfo.o
acpi-y += \
tbfadt.o \
@@ -155,8 +159,10 @@
utmutex.o \
utobject.o \
utosi.o \
+ utownerid.o \
utresrc.o \
utstate.o \
+ utstring.o \
utxface.o \
utxfinit.o \
utxferror.o \
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 8a7d51b..8a6c4a0 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,7 @@
*
* Note: The order of these include files is important.
*/
+#include <acpi/acconfig.h> /* Global configuration constants */
#include "acmacros.h" /* C macros */
#include "aclocal.h" /* Internal data types */
#include "acobject.h" /* ACPI internal object */
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index 432a318..9feba08 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -115,6 +115,21 @@
char *block_arg))
/*
+ * dbconvert - miscellaneous conversion routines
+ */
+ acpi_status acpi_db_hex_char_to_value(int hex_char, u8 *return_value);
+
+acpi_status acpi_db_convert_to_package(char *string, union acpi_object *object);
+
+acpi_status
+acpi_db_convert_to_object(acpi_object_type type,
+ char *string, union acpi_object *object);
+
+u8 *acpi_db_encode_pld_buffer(struct acpi_pld_info *pld_info);
+
+void acpi_db_dump_pld_buffer(union acpi_object *obj_desc);
+
+/*
* dbmethod - control method commands
*/
void
@@ -191,6 +206,8 @@
acpi_db_create_execution_threads(char *num_threads_arg,
char *num_loops_arg, char *method_name_arg);
+void acpi_db_delete_objects(u32 count, union acpi_object *objects);
+
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
u32 acpi_db_get_cache_info(struct acpi_memory_list *cache);
#endif
diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h
index ed33ebc..427db72 100644
--- a/drivers/acpi/acpica/acdispat.h
+++ b/drivers/acpi/acpica/acdispat.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index e975c67..ab0e977 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -158,10 +158,23 @@
void *context);
/*
- * evregion - Address Space handling
+ * evhandler - Address space handling
*/
+u8
+acpi_ev_has_default_handler(struct acpi_namespace_node *node,
+ acpi_adr_space_type space_id);
+
acpi_status acpi_ev_install_region_handlers(void);
+acpi_status
+acpi_ev_install_space_handler(struct acpi_namespace_node *node,
+ acpi_adr_space_type space_id,
+ acpi_adr_space_handler handler,
+ acpi_adr_space_setup setup, void *context);
+
+/*
+ * evregion - Operation region support
+ */
acpi_status acpi_ev_initialize_op_regions(void);
acpi_status
@@ -180,12 +193,6 @@
u8 acpi_ns_is_locked);
acpi_status
-acpi_ev_install_space_handler(struct acpi_namespace_node *node,
- acpi_adr_space_type space_id,
- acpi_adr_space_handler handler,
- acpi_adr_space_setup setup, void *context);
-
-acpi_status
acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
acpi_adr_space_type space_id);
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 64472e4..ecb4992 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -192,14 +192,6 @@
ACPI_EXTERN u8 acpi_gbl_integer_byte_width;
ACPI_EXTERN u8 acpi_gbl_integer_nybble_width;
-/* Mutex for _OSI support */
-
-ACPI_EXTERN acpi_mutex acpi_gbl_osi_mutex;
-
-/* Reader/Writer lock is used for namespace walk and dynamic table unload */
-
-ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock;
-
/*****************************************************************************
*
* Mutual exclusion within ACPICA subsystem
@@ -233,6 +225,14 @@
ACPI_EXTERN acpi_spinlock acpi_gbl_gpe_lock; /* For GPE data structs and registers */
ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */
+/* Mutex for _OSI support */
+
+ACPI_EXTERN acpi_mutex acpi_gbl_osi_mutex;
+
+/* Reader/Writer lock is used for namespace walk and dynamic table unload */
+
+ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock;
+
/*****************************************************************************
*
* Miscellaneous globals
@@ -252,7 +252,7 @@
ACPI_EXTERN struct acpi_global_notify_handler acpi_gbl_global_notify[2];
ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler;
ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler;
-ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler;
+ACPI_EXTERN acpi_table_handler acpi_gbl_table_handler;
ACPI_EXTERN void *acpi_gbl_table_handler_context;
ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk;
ACPI_EXTERN acpi_interface_handler acpi_gbl_interface_handler;
@@ -304,6 +304,7 @@
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
+ACPI_EXTERN u8 acpi_gbl_disable_mem_tracking;
#endif
/*****************************************************************************
@@ -365,19 +366,18 @@
*
****************************************************************************/
-extern struct acpi_fixed_event_info
- acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS];
-ACPI_EXTERN struct acpi_fixed_event_handler
- acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS];
-ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
-ACPI_EXTERN struct acpi_gpe_block_info
-*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
-
#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
+ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
+ACPI_EXTERN struct acpi_gpe_block_info
+ *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
+ACPI_EXTERN struct acpi_fixed_event_handler
+ acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS];
+extern struct acpi_fixed_event_info
+ acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS];
#endif /* !ACPI_REDUCED_HARDWARE */
@@ -405,7 +405,7 @@
/*****************************************************************************
*
- * Debugger globals
+ * Debugger and Disassembler globals
*
****************************************************************************/
@@ -413,8 +413,12 @@
#ifdef ACPI_DISASSEMBLER
+u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
+
ACPI_EXTERN u8 acpi_gbl_db_opt_disasm;
ACPI_EXTERN u8 acpi_gbl_db_opt_verbose;
+ACPI_EXTERN struct acpi_external_list *acpi_gbl_external_list;
+ACPI_EXTERN struct acpi_external_file *acpi_gbl_external_file_list;
#endif
#ifdef ACPI_DEBUGGER
@@ -426,6 +430,7 @@
ACPI_EXTERN u8 acpi_gbl_db_opt_tables;
ACPI_EXTERN u8 acpi_gbl_db_opt_stats;
ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
+ACPI_EXTERN u8 acpi_gbl_db_opt_no_region_support;
ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index d902d31..6357e93 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h
index eb30863..8af8c9b 100644
--- a/drivers/acpi/acpica/acinterp.h
+++ b/drivers/acpi/acpica/acinterp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -458,7 +458,7 @@
void acpi_ex_relinquish_interpreter(void);
-void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
+u8 acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
void acpi_ex_acquire_global_lock(u32 rule);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index ff8bd00..805f419 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -189,11 +189,10 @@
#define ANOBJ_EVALUATED 0x20 /* Set on first evaluation of node */
#define ANOBJ_ALLOCATED_BUFFER 0x40 /* Method AML buffer is dynamic (install_method) */
-#define ANOBJ_IS_EXTERNAL 0x08 /* i_aSL only: This object created via External() */
-#define ANOBJ_METHOD_NO_RETVAL 0x10 /* i_aSL only: Method has no return value */
-#define ANOBJ_METHOD_SOME_NO_RETVAL 0x20 /* i_aSL only: Method has at least one return value */
-#define ANOBJ_IS_BIT_OFFSET 0x40 /* i_aSL only: Reference is a bit offset */
-#define ANOBJ_IS_REFERENCED 0x80 /* i_aSL only: Object was referenced */
+#define ANOBJ_IS_EXTERNAL 0x08 /* iASL only: This object created via External() */
+#define ANOBJ_METHOD_NO_RETVAL 0x10 /* iASL only: Method has no return value */
+#define ANOBJ_METHOD_SOME_NO_RETVAL 0x20 /* iASL only: Method has at least one return value */
+#define ANOBJ_IS_REFERENCED 0x80 /* iASL only: Object was referenced */
/* Internal ACPI table management - master table list */
@@ -411,11 +410,10 @@
struct acpi_gpe_notify_info *next;
};
-struct acpi_gpe_notify_object {
- struct acpi_namespace_node *node;
- struct acpi_gpe_notify_object *next;
-};
-
+/*
+ * GPE dispatch info. At any time, the GPE can have at most one type
+ * of dispatch - Method, Handler, or Implicit Notify.
+ */
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
@@ -679,6 +677,8 @@
u8 type; /* Opcode type */
};
+/* Value associated with the parse object */
+
union acpi_parse_value {
u64 integer; /* Integer constant (Up to 64 bits) */
u32 size; /* bytelist or field size */
@@ -1025,6 +1025,31 @@
/*****************************************************************************
*
+ * Disassembler
+ *
+ ****************************************************************************/
+
+struct acpi_external_list {
+ char *path;
+ char *internal_path;
+ struct acpi_external_list *next;
+ u32 value;
+ u16 length;
+ u8 type;
+ u8 flags;
+};
+
+/* Values for Flags field above */
+
+#define ACPI_IPATH_ALLOCATED 0x01
+
+struct acpi_external_file {
+ char *path;
+ struct acpi_external_file *next;
+};
+
+/*****************************************************************************
+ *
* Debugger
*
****************************************************************************/
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index 5efad99..ed7943b 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,14 +49,18 @@
* get into potential aligment issues -- see the STORE macros below.
* Use with care.
*/
-#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr)
-#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr)
-#define ACPI_GET32(ptr) *ACPI_CAST_PTR (u32, ptr)
-#define ACPI_GET64(ptr) *ACPI_CAST_PTR (u64, ptr)
-#define ACPI_SET8(ptr) *ACPI_CAST_PTR (u8, ptr)
-#define ACPI_SET16(ptr) *ACPI_CAST_PTR (u16, ptr)
-#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr)
-#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr)
+#define ACPI_CAST8(ptr) ACPI_CAST_PTR (u8, (ptr))
+#define ACPI_CAST16(ptr) ACPI_CAST_PTR (u16, (ptr))
+#define ACPI_CAST32(ptr) ACPI_CAST_PTR (u32, (ptr))
+#define ACPI_CAST64(ptr) ACPI_CAST_PTR (u64, (ptr))
+#define ACPI_GET8(ptr) (*ACPI_CAST8 (ptr))
+#define ACPI_GET16(ptr) (*ACPI_CAST16 (ptr))
+#define ACPI_GET32(ptr) (*ACPI_CAST32 (ptr))
+#define ACPI_GET64(ptr) (*ACPI_CAST64 (ptr))
+#define ACPI_SET8(ptr, val) (*ACPI_CAST8 (ptr) = (u8) (val))
+#define ACPI_SET16(ptr, val) (*ACPI_CAST16 (ptr) = (u16) (val))
+#define ACPI_SET32(ptr, val) (*ACPI_CAST32 (ptr) = (u32) (val))
+#define ACPI_SET64(ptr, val) (*ACPI_CAST64 (ptr) = (u64) (val))
/*
* printf() format helpers
@@ -293,6 +297,26 @@
#define ACPI_16BIT_MASK 0x0000FFFF
#define ACPI_24BIT_MASK 0x00FFFFFF
+/* Macros to extract flag bits from position zero */
+
+#define ACPI_GET_1BIT_FLAG(value) ((value) & ACPI_1BIT_MASK)
+#define ACPI_GET_2BIT_FLAG(value) ((value) & ACPI_2BIT_MASK)
+#define ACPI_GET_3BIT_FLAG(value) ((value) & ACPI_3BIT_MASK)
+#define ACPI_GET_4BIT_FLAG(value) ((value) & ACPI_4BIT_MASK)
+
+/* Macros to extract flag bits from position one and above */
+
+#define ACPI_EXTRACT_1BIT_FLAG(field, position) (ACPI_GET_1BIT_FLAG ((field) >> position))
+#define ACPI_EXTRACT_2BIT_FLAG(field, position) (ACPI_GET_2BIT_FLAG ((field) >> position))
+#define ACPI_EXTRACT_3BIT_FLAG(field, position) (ACPI_GET_3BIT_FLAG ((field) >> position))
+#define ACPI_EXTRACT_4BIT_FLAG(field, position) (ACPI_GET_4BIT_FLAG ((field) >> position))
+
+/* ACPI Pathname helpers */
+
+#define ACPI_IS_ROOT_PREFIX(c) ((c) == (u8) 0x5C) /* Backslash */
+#define ACPI_IS_PARENT_PREFIX(c) ((c) == (u8) 0x5E) /* Carat */
+#define ACPI_IS_PATH_SEPARATOR(c) ((c) == (u8) 0x2E) /* Period (dot) */
+
/*
* An object of type struct acpi_namespace_node can appear in some contexts
* where a pointer to an object of type union acpi_operand_object can also
@@ -364,137 +388,6 @@
#endif /* ACPI_NO_ERROR_MESSAGES */
-/*
- * Debug macros that are conditionally compiled
- */
-#ifdef ACPI_DEBUG_OUTPUT
-/*
- * Function entry tracing
- */
-#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
-#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS, (void *)b)
-#define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS, (u32)b)
-#define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS, (char *)b)
-
-#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr()
-
-/*
- * Function exit tracing.
- * WARNING: These macros include a return statement. This is usually considered
- * bad form, but having a separate exit macro is very ugly and difficult to maintain.
- * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
- * so that "_AcpiFunctionName" is defined.
- *
- * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
- * about these constructs.
- */
-#ifdef ACPI_USE_DO_WHILE_0
-#define ACPI_DO_WHILE0(a) do a while(0)
-#else
-#define ACPI_DO_WHILE0(a) a
-#endif
-
-#define return_VOID ACPI_DO_WHILE0 ({ \
- acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
- return;})
-/*
- * There are two versions of most of the return macros. The default version is
- * safer, since it avoids side-effects by guaranteeing that the argument will
- * not be evaluated twice.
- *
- * A less-safe version of the macros is provided for optional use if the
- * compiler uses excessive CPU stack (for example, this may happen in the
- * debug case if code optimzation is disabled.)
- */
-#ifndef ACPI_SIMPLE_RETURN_MACROS
-
-#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
- register acpi_status _s = (s); \
- acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
- return (_s); })
-#define return_PTR(s) ACPI_DO_WHILE0 ({ \
- register void *_s = (void *) (s); \
- acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
- return (_s); })
-#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
- register u64 _s = (s); \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
- return (_s); })
-#define return_UINT8(s) ACPI_DO_WHILE0 ({ \
- register u8 _s = (u8) (s); \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
- return (_s); })
-#define return_UINT32(s) ACPI_DO_WHILE0 ({ \
- register u32 _s = (u32) (s); \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
- return (_s); })
-#else /* Use original less-safe macros */
-
-#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
- acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
- return((s)); })
-#define return_PTR(s) ACPI_DO_WHILE0 ({ \
- acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
- return((s)); })
-#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) (s)); \
- return((s)); })
-#define return_UINT8(s) return_VALUE(s)
-#define return_UINT32(s) return_VALUE(s)
-
-#endif /* ACPI_SIMPLE_RETURN_MACROS */
-
-/* Conditional execution */
-
-#define ACPI_DEBUG_EXEC(a) a
-#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
-#define _VERBOSE_STRUCTURES
-
-/* Various object display routines for debug */
-
-#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0)
-#define ACPI_DUMP_OPERANDS(a, b ,c) acpi_ex_dump_operands(a, b, c)
-#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b)
-#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d)
-#define ACPI_DUMP_BUFFER(a, b) acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
-
-#else
-/*
- * This is the non-debug case -- make everything go away,
- * leaving no executable debug code!
- */
-#define ACPI_DEBUG_EXEC(a)
-#define ACPI_DEBUG_ONLY_MEMBERS(a)
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_TRACE_PTR(a, b)
-#define ACPI_FUNCTION_TRACE_U32(a, b)
-#define ACPI_FUNCTION_TRACE_STR(a, b)
-#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_ENTRY()
-#define ACPI_DUMP_STACK_ENTRY(a)
-#define ACPI_DUMP_OPERANDS(a, b, c)
-#define ACPI_DUMP_ENTRY(a, b)
-#define ACPI_DUMP_TABLES(a, b)
-#define ACPI_DUMP_PATHNAME(a, b, c, d)
-#define ACPI_DUMP_BUFFER(a, b)
-#define ACPI_DEBUG_PRINT(pl)
-#define ACPI_DEBUG_PRINT_RAW(pl)
-
-#define return_VOID return
-#define return_ACPI_STATUS(s) return(s)
-#define return_VALUE(s) return(s)
-#define return_UINT8(s) return(s)
-#define return_UINT32(s) return(s)
-#define return_PTR(s) return(s)
-
-#endif /* ACPI_DEBUG_OUTPUT */
-
#if (!ACPI_REDUCED_HARDWARE)
#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr
#else
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 9b19d4b..02cd548 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -218,6 +218,18 @@
u32 user_param_count,
const union acpi_predefined_info *info);
+acpi_status
+acpi_ns_check_object_type(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr,
+ u32 expected_btypes, u32 package_index);
+
+/*
+ * nsprepkg - Validation of predefined name packages
+ */
+acpi_status
+acpi_ns_check_package(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
/*
* nsnames - Name and Scope manipulation
*/
@@ -333,8 +345,6 @@
/*
* nsutils - Utility functions
*/
-u8 acpi_ns_valid_root_prefix(char prefix);
-
acpi_object_type acpi_ns_get_type(struct acpi_namespace_node *node);
u32 acpi_ns_local(acpi_object_type type);
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 24eb9ea..cc7ab6d 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -307,7 +307,7 @@
struct acpi_namespace_node *node; /* Parent device */
void *context;
acpi_adr_space_setup setup;
- union acpi_operand_object *region_list; /* regions using this handler */
+ union acpi_operand_object *region_list; /* Regions using this handler */
union acpi_operand_object *next;
};
diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h
index d786a51..3fc9ca7 100644
--- a/drivers/acpi/acpica/acopcode.h
+++ b/drivers/acpi/acpica/acopcode.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h
index eefcf47..aed3193 100644
--- a/drivers/acpi/acpica/acparser.h
+++ b/drivers/acpi/acpica/acparser.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -105,7 +105,28 @@
union acpi_parse_object *acpi_ps_get_parent(union acpi_parse_object *op);
/*
- * psopcode - AML Opcode information
+ * psobject - support for parse object processing
+ */
+acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start,
+ union acpi_parse_object *unnamed_op,
+ union acpi_parse_object **op);
+
+acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start, union acpi_parse_object **new_op);
+
+acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **op, acpi_status status);
+
+acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, acpi_status status);
+
+/*
+ * psopinfo - AML Opcode information
*/
const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode);
@@ -211,8 +232,6 @@
u8 acpi_ps_is_leading_char(u32 c);
-u8 acpi_ps_is_prefix_char(u32 c);
-
#ifdef ACPI_FUTURE_USAGE
u32 acpi_ps_get_name(union acpi_parse_object *op);
#endif /* ACPI_FUTURE_USAGE */
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 9dfa1c8..752cc40 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -1,12 +1,11 @@
/******************************************************************************
*
* Name: acpredef - Information table for ACPI predefined methods and objects
- * $Revision: 1.1 $
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,13 +50,13 @@
*
* 1) PTYPE1 packages do not contain sub-packages.
*
- * ACPI_PTYPE1_FIXED: Fixed length, 1 or 2 object types:
+ * ACPI_PTYPE1_FIXED: Fixed-length length, 1 or 2 object types:
* object type
* count
* object type
* count
*
- * ACPI_PTYPE1_VAR: Variable length:
+ * ACPI_PTYPE1_VAR: Variable-length length:
* object type (Int/Buf/Ref)
*
* ACPI_PTYPE1_OPTION: Package has some required and some optional elements
@@ -85,10 +84,10 @@
* count
* (Used for _CST)
*
- * ACPI_PTYPE2_FIXED: Each subpackage is of fixed length
+ * ACPI_PTYPE2_FIXED: Each subpackage is of Fixed-length
* (Used for _PRT)
*
- * ACPI_PTYPE2_MIN: Each subpackage has a variable but minimum length
+ * ACPI_PTYPE2_MIN: Each subpackage has a Variable-length but minimum length
* (Used for _HPX)
*
* ACPI_PTYPE2_REV_FIXED: Revision at start, each subpackage is Fixed-length
@@ -124,7 +123,8 @@
* These are the names that can actually be evaluated via acpi_evaluate_object.
* Not present in this table are the following:
*
- * 1) Predefined/Reserved names that are never evaluated via acpi_evaluate_object:
+ * 1) Predefined/Reserved names that are never evaluated via
+ * acpi_evaluate_object:
* _Lxx and _Exx GPE methods
* _Qxx EC methods
* _T_x compiler temporary variables
@@ -149,6 +149,8 @@
* information about the expected structure of the package. This information
* is saved here (rather than in a separate table) in order to minimize the
* overall size of the stored data.
+ *
+ * Note: The additional braces are intended to promote portability.
*/
static const union acpi_predefined_info predefined_names[] = {
{{"_AC0", 0, ACPI_RTYPE_INTEGER}},
@@ -212,9 +214,8 @@
{{"_BCT", 1, ACPI_RTYPE_INTEGER}},
{{"_BDN", 0, ACPI_RTYPE_INTEGER}},
{{"_BFS", 1, 0}},
- {{"_BIF", 0, ACPI_RTYPE_PACKAGE} }, /* Fixed-length (9 Int),(4 Str/Buf) */
- {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9,
- ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER}, 4, 0} },
+ {{"_BIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (9 Int),(4 Str) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, ACPI_RTYPE_STRING}, 4, 0}},
{{"_BIX", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (16 Int),(4 Str) */
{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, ACPI_RTYPE_STRING}, 4,
@@ -236,7 +237,8 @@
{{"_CBA", 0, ACPI_RTYPE_INTEGER}}, /* See PCI firmware spec 3.0 */
{{"_CDM", 0, ACPI_RTYPE_INTEGER}},
{{"_CID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_PACKAGE}}, /* Variable-length (Ints/Strs) */
- {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0,0}, 0,0}},
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0, 0}, 0,
+ 0}},
{{"_CLS", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (3 Int) */
{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 3, 0}, 0, 0}},
@@ -251,7 +253,8 @@
{{{ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0,0}, 0,0}},
{{"_CST", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (1 Int(n), n Pkg (1 Buf/3 Int) */
- {{{ACPI_PTYPE2_PKG_COUNT,ACPI_RTYPE_BUFFER, 1, ACPI_RTYPE_INTEGER}, 3,0}},
+ {{{ACPI_PTYPE2_PKG_COUNT, ACPI_RTYPE_BUFFER, 1, ACPI_RTYPE_INTEGER}, 3,
+ 0}},
{{"_CWS", 1, ACPI_RTYPE_INTEGER}},
{{"_DCK", 1, ACPI_RTYPE_INTEGER}},
@@ -342,8 +345,8 @@
{{"_MBM", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (8 Int) */
{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 8, 0}, 0, 0}},
- {{"_MLS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (2 Str) */
- {{{ACPI_PTYPE2, ACPI_RTYPE_STRING, 2,0}, 0,0}},
+ {{"_MLS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (1 Str/1 Buf) */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_STRING, 1, ACPI_RTYPE_BUFFER}, 1, 0}},
{{"_MSG", 1, 0}},
{{"_MSM", 4, ACPI_RTYPE_INTEGER}},
diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h
index 0347d09..f691d0e 100644
--- a/drivers/acpi/acpica/acresrc.h
+++ b/drivers/acpi/acpica/acresrc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -347,18 +347,21 @@
extern struct acpi_rsdump_info *acpi_gbl_dump_serial_bus_dispatch[];
/*
- * rsdump
+ * rsdumpinfo
*/
extern struct acpi_rsdump_info acpi_rs_dump_irq[];
+extern struct acpi_rsdump_info acpi_rs_dump_prt[];
extern struct acpi_rsdump_info acpi_rs_dump_dma[];
extern struct acpi_rsdump_info acpi_rs_dump_start_dpf[];
extern struct acpi_rsdump_info acpi_rs_dump_end_dpf[];
extern struct acpi_rsdump_info acpi_rs_dump_io[];
+extern struct acpi_rsdump_info acpi_rs_dump_io_flags[];
extern struct acpi_rsdump_info acpi_rs_dump_fixed_io[];
extern struct acpi_rsdump_info acpi_rs_dump_vendor[];
extern struct acpi_rsdump_info acpi_rs_dump_end_tag[];
extern struct acpi_rsdump_info acpi_rs_dump_memory24[];
extern struct acpi_rsdump_info acpi_rs_dump_memory32[];
+extern struct acpi_rsdump_info acpi_rs_dump_memory_flags[];
extern struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[];
extern struct acpi_rsdump_info acpi_rs_dump_address16[];
extern struct acpi_rsdump_info acpi_rs_dump_address32[];
@@ -372,6 +375,7 @@
extern struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[];
extern struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[];
extern struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[];
+extern struct acpi_rsdump_info acpi_rs_dump_general_flags[];
#endif
#endif /* __ACRESRC_H__ */
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index 937e66c..7896d85 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h
index 6712965..7755e91 100644
--- a/drivers/acpi/acpica/actables.h
+++ b/drivers/acpi/acpica/actables.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index b0f5f92..0082fa0 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -483,39 +483,17 @@
/*
* utmisc
*/
-void ut_convert_backslashes(char *pathname);
-
const char *acpi_ut_validate_exception(acpi_status status);
u8 acpi_ut_is_pci_root_bridge(char *id);
u8 acpi_ut_is_aml_table(struct acpi_table_header *table);
-acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id);
-
-void acpi_ut_release_owner_id(acpi_owner_id * owner_id);
-
acpi_status
acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
void *target_object,
acpi_pkg_callback walk_callback, void *context);
-void acpi_ut_strupr(char *src_string);
-
-void acpi_ut_strlwr(char *src_string);
-
-int acpi_ut_stricmp(char *string1, char *string2);
-
-void acpi_ut_print_string(char *string, u8 max_length);
-
-u8 acpi_ut_valid_acpi_name(u32 name);
-
-void acpi_ut_repair_name(char *name);
-
-u8 acpi_ut_valid_acpi_char(char character, u32 position);
-
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
-
/* Values for Base above (16=Hex, 10=Decimal) */
#define ACPI_ANY_BASE 0
@@ -532,15 +510,25 @@
#endif
/*
+ * utownerid - Support for Table/Method Owner IDs
+ */
+acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id);
+
+void acpi_ut_release_owner_id(acpi_owner_id * owner_id);
+
+/*
* utresrc
*/
acpi_status
-acpi_ut_walk_aml_resources(u8 *aml,
+acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state,
+ u8 *aml,
acpi_size aml_length,
acpi_walk_aml_callback user_function,
void **context);
-acpi_status acpi_ut_validate_resource(void *aml, u8 *return_index);
+acpi_status
+acpi_ut_validate_resource(struct acpi_walk_state *walk_state,
+ void *aml, u8 *return_index);
u32 acpi_ut_get_descriptor_length(void *aml);
@@ -554,6 +542,27 @@
acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
/*
+ * utstring - String and character utilities
+ */
+void acpi_ut_strupr(char *src_string);
+
+void acpi_ut_strlwr(char *src_string);
+
+int acpi_ut_stricmp(char *string1, char *string2);
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
+
+void acpi_ut_print_string(char *string, u8 max_length);
+
+void ut_convert_backslashes(char *pathname);
+
+u8 acpi_ut_valid_acpi_name(u32 name);
+
+u8 acpi_ut_valid_acpi_char(char character, u32 position);
+
+void acpi_ut_repair_name(char *name);
+
+/*
* utmutex - mutex support
*/
acpi_status acpi_ut_mutex_initialize(void);
diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h
index c26f8ff..48a3e33 100644
--- a/drivers/acpi/acpica/amlcode.h
+++ b/drivers/acpi/acpica/amlcode.h
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h
index 9684496..87c2636 100644
--- a/drivers/acpi/acpica/amlresrc.h
+++ b/drivers/acpi/acpica/amlresrc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -199,6 +199,12 @@
struct aml_resource_large_header {
AML_RESOURCE_LARGE_HEADER_COMMON};
+/* General Flags for address space resource descriptors */
+
+#define ACPI_RESOURCE_FLAG_DEC 2
+#define ACPI_RESOURCE_FLAG_MIF 4
+#define ACPI_RESOURCE_FLAG_MAF 8
+
struct aml_resource_memory24 {
AML_RESOURCE_LARGE_HEADER_COMMON u8 flags;
u16 minimum;
diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c
index c8b5e25..fb09b08 100644
--- a/drivers/acpi/acpica/dsargs.c
+++ b/drivers/acpi/acpica/dsargs.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
index 57895db..7ea0f16 100644
--- a/drivers/acpi/acpica/dscontrol.c
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index b5b904e..feadeed 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
index 87eff70..bc8e63f 100644
--- a/drivers/acpi/acpica/dsinit.c
+++ b/drivers/acpi/acpica/dsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index 52eb4e0..a9ffd44 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,7 +47,7 @@
#include "acinterp.h"
#include "acnamesp.h"
#ifdef ACPI_DISASSEMBLER
-#include <acpi/acdisasm.h>
+#include "acdisasm.h"
#endif
#define _COMPONENT ACPI_DISPATCHER
@@ -151,6 +151,7 @@
status = acpi_os_create_mutex(&mutex_desc->mutex.os_mutex);
if (ACPI_FAILURE(status)) {
+ acpi_ut_delete_object_desc(mutex_desc);
return_ACPI_STATUS(status);
}
@@ -378,7 +379,8 @@
*/
info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
if (!info) {
- return_ACPI_STATUS(AE_NO_MEMORY);
+ status = AE_NO_MEMORY;
+ goto cleanup;
}
info->parameters = &this_walk_state->operands[0];
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index 9a83b7e..3da8046 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index c9f15d3..e20e9f8 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -388,7 +388,7 @@
union acpi_parse_object *parent;
union acpi_operand_object *obj_desc = NULL;
acpi_status status = AE_OK;
- unsigned i;
+ u32 i;
u16 index;
u16 reference_count;
@@ -525,7 +525,7 @@
}
ACPI_INFO((AE_INFO,
- "Actual Package length (%u) is larger than NumElements field (%u), truncated\n",
+ "Actual Package length (%u) is larger than NumElements field (%u), truncated",
i, element_count));
} else if (i < element_count) {
/*
@@ -703,7 +703,7 @@
/* Truncate value if we are executing from a 32-bit ACPI table */
#ifndef ACPI_NO_METHOD_EXECUTION
- acpi_ex_truncate_for32bit_table(obj_desc);
+ (void)acpi_ex_truncate_for32bit_table(obj_desc);
#endif
break;
@@ -725,8 +725,18 @@
case AML_TYPE_LITERAL:
obj_desc->integer.value = op->common.value.integer;
+
#ifndef ACPI_NO_METHOD_EXECUTION
- acpi_ex_truncate_for32bit_table(obj_desc);
+ if (acpi_ex_truncate_for32bit_table(obj_desc)) {
+
+ /* Warn if we found a 64-bit constant in a 32-bit table */
+
+ ACPI_WARNING((AE_INFO,
+ "Truncated 64-bit constant found in 32-bit table: %8.8X%8.8X => %8.8X",
+ ACPI_FORMAT_UINT64(op->common.
+ value.integer),
+ (u32)obj_desc->integer.value));
+ }
#endif
break;
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index d09c6b4..ee6367b 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -486,18 +486,18 @@
ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
/*
- * This is where we evaluate the signature_string and oem_iDString
- * and oem_table_iDString of the data_table_region declaration
+ * This is where we evaluate the Signature string, oem_id string,
+ * and oem_table_id string of the Data Table Region declaration
*/
node = op->common.node;
- /* next_op points to signature_string op */
+ /* next_op points to Signature string op */
next_op = op->common.value.arg;
/*
- * Evaluate/create the signature_string and oem_iDString
- * and oem_table_iDString operands
+ * Evaluate/create the Signature string, oem_id string,
+ * and oem_table_id string operands
*/
status = acpi_ds_create_operands(walk_state, next_op);
if (ACPI_FAILURE(status)) {
@@ -505,8 +505,8 @@
}
/*
- * Resolve the signature_string and oem_iDString
- * and oem_table_iDString operands
+ * Resolve the Signature string, oem_id string,
+ * and oem_table_id string operands
*/
status = acpi_ex_resolve_operands(op->common.aml_opcode,
ACPI_WALK_OPERANDS, walk_state);
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index afeb99f..4d8c992 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -178,7 +178,7 @@
if (!op) {
ACPI_ERROR((AE_INFO, "Null Op"));
- return_UINT8(TRUE);
+ return_VALUE(TRUE);
}
/*
@@ -210,7 +210,7 @@
"At Method level, result of [%s] not used\n",
acpi_ps_get_opcode_name(op->common.
aml_opcode)));
- return_UINT8(FALSE);
+ return_VALUE(FALSE);
}
/* Get info on the parent. The root_op is AML_SCOPE */
@@ -219,7 +219,7 @@
acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode);
if (parent_info->class == AML_CLASS_UNKNOWN) {
ACPI_ERROR((AE_INFO, "Unknown parent opcode Op=%p", op));
- return_UINT8(FALSE);
+ return_VALUE(FALSE);
}
/*
@@ -307,7 +307,7 @@
acpi_ps_get_opcode_name(op->common.parent->common.
aml_opcode), op));
- return_UINT8(TRUE);
+ return_VALUE(TRUE);
result_not_used:
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -316,7 +316,7 @@
acpi_ps_get_opcode_name(op->common.parent->common.
aml_opcode), op));
- return_UINT8(FALSE);
+ return_VALUE(FALSE);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 5859393..44f8325 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -149,7 +149,7 @@
/* Truncate the predicate to 32-bits if necessary */
- acpi_ex_truncate_for32bit_table(local_obj_desc);
+ (void)acpi_ex_truncate_for32bit_table(local_obj_desc);
/*
* Save the result of the predicate evaluation on
@@ -706,7 +706,7 @@
* ACPI 2.0 support for 64-bit integers: Truncate numeric
* result value if we are executing from a 32-bit ACPI table
*/
- acpi_ex_truncate_for32bit_table(walk_state->result_obj);
+ (void)acpi_ex_truncate_for32bit_table(walk_state->result_obj);
/*
* Check if we just completed the evaluation of a
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index 5575100..6e17c0e 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,7 +50,7 @@
#include "acnamesp.h"
#ifdef ACPI_ASL_COMPILER
-#include <acpi/acdisasm.h>
+#include "acdisasm.h"
#endif
#define _COMPONENT ACPI_DISPATCHER
@@ -178,7 +178,8 @@
* Target of Scope() not found. Generate an External for it, and
* insert the name into the namespace.
*/
- acpi_dm_add_to_external_list(path, ACPI_TYPE_DEVICE, 0);
+ acpi_dm_add_to_external_list(op, path, ACPI_TYPE_DEVICE,
+ 0);
status =
acpi_ns_lookup(walk_state->scope_info, path,
object_type, ACPI_IMODE_LOAD_PASS1,
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
index 3798357..4407ff2 100644
--- a/drivers/acpi/acpica/dswload2.c
+++ b/drivers/acpi/acpica/dswload2.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -222,7 +222,7 @@
*/
ACPI_WARNING((AE_INFO,
"Type override - [%4.4s] had invalid type (%s) "
- "for Scope operator, changed to type ANY\n",
+ "for Scope operator, changed to type ANY",
acpi_ut_get_node_name(node),
acpi_ut_get_type_name(node->type)));
diff --git a/drivers/acpi/acpica/dswscope.c b/drivers/acpi/acpica/dswscope.c
index f6c4295..d67891d 100644
--- a/drivers/acpi/acpica/dswscope.c
+++ b/drivers/acpi/acpica/dswscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index 3e65a15..ecb12e2 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index d4acfbb..b8ea0b2 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c
index af14a71..a621481 100644
--- a/drivers/acpi/acpica/evglock.c
+++ b/drivers/acpi/acpica/evglock.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 36d1205..b9adb9a 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -561,8 +561,8 @@
status = AE_NO_MEMORY;
} else {
/*
- * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
- * control method that corresponds to this GPE
+ * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the
+ * _Lxx/_Exx control method that corresponds to this GPE
*/
info->prefix_node =
local_gpe_event_info->dispatch.method_node;
@@ -707,7 +707,7 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to clear GPE%02X", gpe_number));
- return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
+ return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
}
}
@@ -724,7 +724,7 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE%02X", gpe_number));
- return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
+ return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
}
/*
@@ -765,7 +765,7 @@
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to queue handler for GPE%2X - event disabled",
+ "Unable to queue handler for GPE%02X - event disabled",
gpe_number));
}
break;
@@ -784,7 +784,7 @@
break;
}
- return_UINT32(ACPI_INTERRUPT_HANDLED);
+ return_VALUE(ACPI_INTERRUPT_HANDLED);
}
#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 1571a61..a2d688b 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -405,13 +405,13 @@
(*return_gpe_block) = gpe_block;
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
- (u32) gpe_block->block_base_number,
- (u32) (gpe_block->block_base_number +
- (gpe_block->gpe_count - 1)),
- gpe_device->name.ascii, gpe_block->register_count,
- interrupt_number));
+ ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+ " Initialized GPE %02X to %02X [%4.4s] %u regs on interrupt 0x%X\n",
+ (u32)gpe_block->block_base_number,
+ (u32)(gpe_block->block_base_number +
+ (gpe_block->gpe_count - 1)),
+ gpe_device->name.ascii, gpe_block->register_count,
+ interrupt_number));
/* Update global count of currently available GPEs */
@@ -496,9 +496,11 @@
}
if (gpe_enabled_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "Enabled %u GPEs in this block\n",
- gpe_enabled_count));
+ ACPI_INFO((AE_INFO,
+ "Enabled %u GPEs in block %02X to %02X",
+ gpe_enabled_count, (u32)gpe_block->block_base_number,
+ (u32)(gpe_block->block_base_number +
+ (gpe_block->gpe_count - 1))));
}
gpe_block->initialized = TRUE;
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index da0add8..72b8f6b 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -86,6 +86,9 @@
ACPI_FUNCTION_TRACE(ev_gpe_initialize);
+ ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+ "Initializing General Purpose Events (GPEs):\n"));
+
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
index 228a0c3..b24dbb8 100644
--- a/drivers/acpi/acpica/evgpeutil.c
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evhandler.c b/drivers/acpi/acpica/evhandler.c
new file mode 100644
index 0000000..d4f8311
--- /dev/null
+++ b/drivers/acpi/acpica/evhandler.c
@@ -0,0 +1,529 @@
+/******************************************************************************
+ *
+ * Module Name: evhandler - Support for Address Space handlers
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+#include "acnamesp.h"
+#include "acinterp.h"
+
+#define _COMPONENT ACPI_EVENTS
+ACPI_MODULE_NAME("evhandler")
+
+/* Local prototypes */
+static acpi_status
+acpi_ev_install_handler(acpi_handle obj_handle,
+ u32 level, void *context, void **return_value);
+
+/* These are the address spaces that will get default handlers */
+
+u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
+ ACPI_ADR_SPACE_SYSTEM_MEMORY,
+ ACPI_ADR_SPACE_SYSTEM_IO,
+ ACPI_ADR_SPACE_PCI_CONFIG,
+ ACPI_ADR_SPACE_DATA_TABLE
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_install_region_handlers
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Installs the core subsystem default address space handlers.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_install_region_handlers(void)
+{
+ acpi_status status;
+ u32 i;
+
+ ACPI_FUNCTION_TRACE(ev_install_region_handlers);
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * All address spaces (PCI Config, EC, SMBus) are scope dependent and
+ * registration must occur for a specific device.
+ *
+ * In the case of the system memory and IO address spaces there is
+ * currently no device associated with the address space. For these we
+ * use the root.
+ *
+ * We install the default PCI config space handler at the root so that
+ * this space is immediately available even though the we have not
+ * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
+ * specification which states that the PCI config space must be always
+ * available -- even though we are nowhere near ready to find the PCI root
+ * buses at this point.
+ *
+ * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
+ * has already been installed (via acpi_install_address_space_handler).
+ * Similar for AE_SAME_HANDLER.
+ */
+ for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
+ status = acpi_ev_install_space_handler(acpi_gbl_root_node,
+ acpi_gbl_default_address_spaces
+ [i],
+ ACPI_DEFAULT_HANDLER,
+ NULL, NULL);
+ switch (status) {
+ case AE_OK:
+ case AE_SAME_HANDLER:
+ case AE_ALREADY_EXISTS:
+
+ /* These exceptions are all OK */
+
+ status = AE_OK;
+ break;
+
+ default:
+
+ goto unlock_and_exit;
+ }
+ }
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_has_default_handler
+ *
+ * PARAMETERS: node - Namespace node for the device
+ * space_id - The address space ID
+ *
+ * RETURN: TRUE if default handler is installed, FALSE otherwise
+ *
+ * DESCRIPTION: Check if the default handler is installed for the requested
+ * space ID.
+ *
+ ******************************************************************************/
+
+u8
+acpi_ev_has_default_handler(struct acpi_namespace_node *node,
+ acpi_adr_space_type space_id)
+{
+ union acpi_operand_object *obj_desc;
+ union acpi_operand_object *handler_obj;
+
+ /* Must have an existing internal object */
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (obj_desc) {
+ handler_obj = obj_desc->device.handler;
+
+ /* Walk the linked list of handlers for this object */
+
+ while (handler_obj) {
+ if (handler_obj->address_space.space_id == space_id) {
+ if (handler_obj->address_space.handler_flags &
+ ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
+ return (TRUE);
+ }
+ }
+
+ handler_obj = handler_obj->address_space.next;
+ }
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_install_handler
+ *
+ * PARAMETERS: walk_namespace callback
+ *
+ * DESCRIPTION: This routine installs an address handler into objects that are
+ * of type Region or Device.
+ *
+ * If the Object is a Device, and the device has a handler of
+ * the same type then the search is terminated in that branch.
+ *
+ * This is because the existing handler is closer in proximity
+ * to any more regions than the one we are trying to install.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_install_handler(acpi_handle obj_handle,
+ u32 level, void *context, void **return_value)
+{
+ union acpi_operand_object *handler_obj;
+ union acpi_operand_object *next_handler_obj;
+ union acpi_operand_object *obj_desc;
+ struct acpi_namespace_node *node;
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(ev_install_handler);
+
+ handler_obj = (union acpi_operand_object *)context;
+
+ /* Parameter validation */
+
+ if (!handler_obj) {
+ return (AE_OK);
+ }
+
+ /* Convert and validate the device handle */
+
+ node = acpi_ns_validate_handle(obj_handle);
+ if (!node) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /*
+ * We only care about regions and objects that are allowed to have
+ * address space handlers
+ */
+ if ((node->type != ACPI_TYPE_DEVICE) &&
+ (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
+ return (AE_OK);
+ }
+
+ /* Check for an existing internal object */
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
+
+ /* No object, just exit */
+
+ return (AE_OK);
+ }
+
+ /* Devices are handled different than regions */
+
+ if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
+
+ /* Check if this Device already has a handler for this address space */
+
+ next_handler_obj = obj_desc->device.handler;
+ while (next_handler_obj) {
+
+ /* Found a handler, is it for the same address space? */
+
+ if (next_handler_obj->address_space.space_id ==
+ handler_obj->address_space.space_id) {
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Found handler for region [%s] in device %p(%p) "
+ "handler %p\n",
+ acpi_ut_get_region_name
+ (handler_obj->address_space.
+ space_id), obj_desc,
+ next_handler_obj,
+ handler_obj));
+
+ /*
+ * Since the object we found it on was a device, then it
+ * means that someone has already installed a handler for
+ * the branch of the namespace from this device on. Just
+ * bail out telling the walk routine to not traverse this
+ * branch. This preserves the scoping rule for handlers.
+ */
+ return (AE_CTRL_DEPTH);
+ }
+
+ /* Walk the linked list of handlers attached to this device */
+
+ next_handler_obj = next_handler_obj->address_space.next;
+ }
+
+ /*
+ * As long as the device didn't have a handler for this space we
+ * don't care about it. We just ignore it and proceed.
+ */
+ return (AE_OK);
+ }
+
+ /* Object is a Region */
+
+ if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
+
+ /* This region is for a different address space, just ignore it */
+
+ return (AE_OK);
+ }
+
+ /*
+ * Now we have a region and it is for the handler's address space type.
+ *
+ * First disconnect region for any previous handler (if any)
+ */
+ acpi_ev_detach_region(obj_desc, FALSE);
+
+ /* Connect the region to the new handler */
+
+ status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_install_space_handler
+ *
+ * PARAMETERS: node - Namespace node for the device
+ * space_id - The address space ID
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install a handler for all op_regions of a given space_id.
+ * Assumes namespace is locked
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_install_space_handler(struct acpi_namespace_node * node,
+ acpi_adr_space_type space_id,
+ acpi_adr_space_handler handler,
+ acpi_adr_space_setup setup, void *context)
+{
+ union acpi_operand_object *obj_desc;
+ union acpi_operand_object *handler_obj;
+ acpi_status status;
+ acpi_object_type type;
+ u8 flags = 0;
+
+ ACPI_FUNCTION_TRACE(ev_install_space_handler);
+
+ /*
+ * This registration is valid for only the types below and the root. This
+ * is where the default handlers get placed.
+ */
+ if ((node->type != ACPI_TYPE_DEVICE) &&
+ (node->type != ACPI_TYPE_PROCESSOR) &&
+ (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
+ status = AE_BAD_PARAMETER;
+ goto unlock_and_exit;
+ }
+
+ if (handler == ACPI_DEFAULT_HANDLER) {
+ flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
+
+ switch (space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ handler = acpi_ex_system_memory_space_handler;
+ setup = acpi_ev_system_memory_region_setup;
+ break;
+
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ handler = acpi_ex_system_io_space_handler;
+ setup = acpi_ev_io_space_region_setup;
+ break;
+
+ case ACPI_ADR_SPACE_PCI_CONFIG:
+ handler = acpi_ex_pci_config_space_handler;
+ setup = acpi_ev_pci_config_region_setup;
+ break;
+
+ case ACPI_ADR_SPACE_CMOS:
+ handler = acpi_ex_cmos_space_handler;
+ setup = acpi_ev_cmos_region_setup;
+ break;
+
+ case ACPI_ADR_SPACE_PCI_BAR_TARGET:
+ handler = acpi_ex_pci_bar_space_handler;
+ setup = acpi_ev_pci_bar_region_setup;
+ break;
+
+ case ACPI_ADR_SPACE_DATA_TABLE:
+ handler = acpi_ex_data_table_space_handler;
+ setup = NULL;
+ break;
+
+ default:
+ status = AE_BAD_PARAMETER;
+ goto unlock_and_exit;
+ }
+ }
+
+ /* If the caller hasn't specified a setup routine, use the default */
+
+ if (!setup) {
+ setup = acpi_ev_default_region_setup;
+ }
+
+ /* Check for an existing internal object */
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (obj_desc) {
+ /*
+ * The attached device object already exists. Make sure the handler
+ * is not already installed.
+ */
+ handler_obj = obj_desc->device.handler;
+
+ /* Walk the handler list for this device */
+
+ while (handler_obj) {
+
+ /* Same space_id indicates a handler already installed */
+
+ if (handler_obj->address_space.space_id == space_id) {
+ if (handler_obj->address_space.handler ==
+ handler) {
+ /*
+ * It is (relatively) OK to attempt to install the SAME
+ * handler twice. This can easily happen with the
+ * PCI_Config space.
+ */
+ status = AE_SAME_HANDLER;
+ goto unlock_and_exit;
+ } else {
+ /* A handler is already installed */
+
+ status = AE_ALREADY_EXISTS;
+ }
+ goto unlock_and_exit;
+ }
+
+ /* Walk the linked list of handlers */
+
+ handler_obj = handler_obj->address_space.next;
+ }
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Creating object on Device %p while installing handler\n",
+ node));
+
+ /* obj_desc does not exist, create one */
+
+ if (node->type == ACPI_TYPE_ANY) {
+ type = ACPI_TYPE_DEVICE;
+ } else {
+ type = node->type;
+ }
+
+ obj_desc = acpi_ut_create_internal_object(type);
+ if (!obj_desc) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ /* Init new descriptor */
+
+ obj_desc->common.type = (u8)type;
+
+ /* Attach the new object to the Node */
+
+ status = acpi_ns_attach_object(node, obj_desc, type);
+
+ /* Remove local reference to the object */
+
+ acpi_ut_remove_reference(obj_desc);
+
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
+ acpi_ut_get_region_name(space_id), space_id,
+ acpi_ut_get_node_name(node), node, obj_desc));
+
+ /*
+ * Install the handler
+ *
+ * At this point there is no existing handler. Just allocate the object
+ * for the handler and link it into the list.
+ */
+ handler_obj =
+ acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
+ if (!handler_obj) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ /* Init handler obj */
+
+ handler_obj->address_space.space_id = (u8)space_id;
+ handler_obj->address_space.handler_flags = flags;
+ handler_obj->address_space.region_list = NULL;
+ handler_obj->address_space.node = node;
+ handler_obj->address_space.handler = handler;
+ handler_obj->address_space.context = context;
+ handler_obj->address_space.setup = setup;
+
+ /* Install at head of Device.address_space list */
+
+ handler_obj->address_space.next = obj_desc->device.handler;
+
+ /*
+ * The Device object is the first reference on the handler_obj.
+ * Each region that uses the handler adds a reference.
+ */
+ obj_desc->device.handler = handler_obj;
+
+ /*
+ * Walk the namespace finding all of the regions this
+ * handler will manage.
+ *
+ * Start at the device and search the branch toward
+ * the leaf nodes until either the leaf is encountered or
+ * a device is detected that has an address handler of the
+ * same type.
+ *
+ * In either case, back up and search down the remainder
+ * of the branch
+ */
+ status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
+ ACPI_NS_WALK_UNLOCK,
+ acpi_ev_install_handler, NULL,
+ handler_obj, NULL);
+
+ unlock_and_exit:
+ return_ACPI_STATUS(status);
+}
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index 51f5379..c986b23 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 0cc6a16..6555e35 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -1,11 +1,11 @@
/******************************************************************************
*
- * Module Name: evregion - ACPI address_space (op_region) handler dispatch
+ * Module Name: evregion - Operation Region support
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,10 +50,9 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evregion")
+extern u8 acpi_gbl_default_address_spaces[];
+
/* Local prototypes */
-static u8
-acpi_ev_has_default_handler(struct acpi_namespace_node *node,
- acpi_adr_space_type space_id);
static void acpi_ev_orphan_ec_reg_method(void);
@@ -61,135 +60,6 @@
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
-static acpi_status
-acpi_ev_install_handler(acpi_handle obj_handle,
- u32 level, void *context, void **return_value);
-
-/* These are the address spaces that will get default handlers */
-
-#define ACPI_NUM_DEFAULT_SPACES 4
-
-static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
- ACPI_ADR_SPACE_SYSTEM_MEMORY,
- ACPI_ADR_SPACE_SYSTEM_IO,
- ACPI_ADR_SPACE_PCI_CONFIG,
- ACPI_ADR_SPACE_DATA_TABLE
-};
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_install_region_handlers
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Installs the core subsystem default address space handlers.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_install_region_handlers(void)
-{
- acpi_status status;
- u32 i;
-
- ACPI_FUNCTION_TRACE(ev_install_region_handlers);
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * All address spaces (PCI Config, EC, SMBus) are scope dependent and
- * registration must occur for a specific device.
- *
- * In the case of the system memory and IO address spaces there is
- * currently no device associated with the address space. For these we
- * use the root.
- *
- * We install the default PCI config space handler at the root so that
- * this space is immediately available even though the we have not
- * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
- * specification which states that the PCI config space must be always
- * available -- even though we are nowhere near ready to find the PCI root
- * buses at this point.
- *
- * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
- * has already been installed (via acpi_install_address_space_handler).
- * Similar for AE_SAME_HANDLER.
- */
- for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
- status = acpi_ev_install_space_handler(acpi_gbl_root_node,
- acpi_gbl_default_address_spaces
- [i],
- ACPI_DEFAULT_HANDLER,
- NULL, NULL);
- switch (status) {
- case AE_OK:
- case AE_SAME_HANDLER:
- case AE_ALREADY_EXISTS:
-
- /* These exceptions are all OK */
-
- status = AE_OK;
- break;
-
- default:
-
- goto unlock_and_exit;
- }
- }
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_has_default_handler
- *
- * PARAMETERS: node - Namespace node for the device
- * space_id - The address space ID
- *
- * RETURN: TRUE if default handler is installed, FALSE otherwise
- *
- * DESCRIPTION: Check if the default handler is installed for the requested
- * space ID.
- *
- ******************************************************************************/
-
-static u8
-acpi_ev_has_default_handler(struct acpi_namespace_node *node,
- acpi_adr_space_type space_id)
-{
- union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj;
-
- /* Must have an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
- handler_obj = obj_desc->device.handler;
-
- /* Walk the linked list of handlers for this object */
-
- while (handler_obj) {
- if (handler_obj->address_space.space_id == space_id) {
- if (handler_obj->address_space.handler_flags &
- ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
- return (TRUE);
- }
- }
-
- handler_obj = handler_obj->address_space.next;
- }
- }
-
- return (FALSE);
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ev_initialize_op_regions
@@ -241,91 +111,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ev_execute_reg_method
- *
- * PARAMETERS: region_obj - Region object
- * function - Passed to _REG: On (1) or Off (0)
- *
- * RETURN: Status
- *
- * DESCRIPTION: Execute _REG method for a region
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
-{
- struct acpi_evaluate_info *info;
- union acpi_operand_object *args[3];
- union acpi_operand_object *region_obj2;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_execute_reg_method);
-
- region_obj2 = acpi_ns_get_secondary_object(region_obj);
- if (!region_obj2) {
- return_ACPI_STATUS(AE_NOT_EXIST);
- }
-
- if (region_obj2->extra.method_REG == NULL) {
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Allocate and initialize the evaluation information block */
-
- info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
- if (!info) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- info->prefix_node = region_obj2->extra.method_REG;
- info->pathname = NULL;
- info->parameters = args;
- info->flags = ACPI_IGNORE_RETURN_VALUE;
-
- /*
- * The _REG method has two arguments:
- *
- * arg0 - Integer:
- * Operation region space ID Same value as region_obj->Region.space_id
- *
- * arg1 - Integer:
- * connection status 1 for connecting the handler, 0 for disconnecting
- * the handler (Passed as a parameter)
- */
- args[0] =
- acpi_ut_create_integer_object((u64) region_obj->region.space_id);
- if (!args[0]) {
- status = AE_NO_MEMORY;
- goto cleanup1;
- }
-
- args[1] = acpi_ut_create_integer_object((u64) function);
- if (!args[1]) {
- status = AE_NO_MEMORY;
- goto cleanup2;
- }
-
- args[2] = NULL; /* Terminate list */
-
- /* Execute the method, no return value */
-
- ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
- (ACPI_TYPE_METHOD, info->prefix_node, NULL));
-
- status = acpi_ns_evaluate(info);
- acpi_ut_remove_reference(args[1]);
-
- cleanup2:
- acpi_ut_remove_reference(args[0]);
-
- cleanup1:
- ACPI_FREE(info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_address_space_dispatch
*
* PARAMETERS: region_obj - Internal region object
@@ -709,351 +494,86 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ev_install_handler
+ * FUNCTION: acpi_ev_execute_reg_method
*
- * PARAMETERS: walk_namespace callback
- *
- * DESCRIPTION: This routine installs an address handler into objects that are
- * of type Region or Device.
- *
- * If the Object is a Device, and the device has a handler of
- * the same type then the search is terminated in that branch.
- *
- * This is because the existing handler is closer in proximity
- * to any more regions than the one we are trying to install.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ev_install_handler(acpi_handle obj_handle,
- u32 level, void *context, void **return_value)
-{
- union acpi_operand_object *handler_obj;
- union acpi_operand_object *next_handler_obj;
- union acpi_operand_object *obj_desc;
- struct acpi_namespace_node *node;
- acpi_status status;
-
- ACPI_FUNCTION_NAME(ev_install_handler);
-
- handler_obj = (union acpi_operand_object *)context;
-
- /* Parameter validation */
-
- if (!handler_obj) {
- return (AE_OK);
- }
-
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(obj_handle);
- if (!node) {
- return (AE_BAD_PARAMETER);
- }
-
- /*
- * We only care about regions and objects that are allowed to have
- * address space handlers
- */
- if ((node->type != ACPI_TYPE_DEVICE) &&
- (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
- return (AE_OK);
- }
-
- /* Check for an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (!obj_desc) {
-
- /* No object, just exit */
-
- return (AE_OK);
- }
-
- /* Devices are handled different than regions */
-
- if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
-
- /* Check if this Device already has a handler for this address space */
-
- next_handler_obj = obj_desc->device.handler;
- while (next_handler_obj) {
-
- /* Found a handler, is it for the same address space? */
-
- if (next_handler_obj->address_space.space_id ==
- handler_obj->address_space.space_id) {
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Found handler for region [%s] in device %p(%p) "
- "handler %p\n",
- acpi_ut_get_region_name
- (handler_obj->address_space.
- space_id), obj_desc,
- next_handler_obj,
- handler_obj));
-
- /*
- * Since the object we found it on was a device, then it
- * means that someone has already installed a handler for
- * the branch of the namespace from this device on. Just
- * bail out telling the walk routine to not traverse this
- * branch. This preserves the scoping rule for handlers.
- */
- return (AE_CTRL_DEPTH);
- }
-
- /* Walk the linked list of handlers attached to this device */
-
- next_handler_obj = next_handler_obj->address_space.next;
- }
-
- /*
- * As long as the device didn't have a handler for this space we
- * don't care about it. We just ignore it and proceed.
- */
- return (AE_OK);
- }
-
- /* Object is a Region */
-
- if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
-
- /* This region is for a different address space, just ignore it */
-
- return (AE_OK);
- }
-
- /*
- * Now we have a region and it is for the handler's address space type.
- *
- * First disconnect region for any previous handler (if any)
- */
- acpi_ev_detach_region(obj_desc, FALSE);
-
- /* Connect the region to the new handler */
-
- status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
- return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_install_space_handler
- *
- * PARAMETERS: node - Namespace node for the device
- * space_id - The address space ID
- * handler - Address of the handler
- * setup - Address of the setup function
- * context - Value passed to the handler on each access
+ * PARAMETERS: region_obj - Region object
+ * function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
- * DESCRIPTION: Install a handler for all op_regions of a given space_id.
- * Assumes namespace is locked
+ * DESCRIPTION: Execute _REG method for a region
*
******************************************************************************/
acpi_status
-acpi_ev_install_space_handler(struct acpi_namespace_node * node,
- acpi_adr_space_type space_id,
- acpi_adr_space_handler handler,
- acpi_adr_space_setup setup, void *context)
+acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
{
- union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj;
+ struct acpi_evaluate_info *info;
+ union acpi_operand_object *args[3];
+ union acpi_operand_object *region_obj2;
acpi_status status;
- acpi_object_type type;
- u8 flags = 0;
- ACPI_FUNCTION_TRACE(ev_install_space_handler);
+ ACPI_FUNCTION_TRACE(ev_execute_reg_method);
+
+ region_obj2 = acpi_ns_get_secondary_object(region_obj);
+ if (!region_obj2) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
+ }
+
+ if (region_obj2->extra.method_REG == NULL) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Allocate and initialize the evaluation information block */
+
+ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+ if (!info) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ info->prefix_node = region_obj2->extra.method_REG;
+ info->pathname = NULL;
+ info->parameters = args;
+ info->flags = ACPI_IGNORE_RETURN_VALUE;
/*
- * This registration is valid for only the types below and the root. This
- * is where the default handlers get placed.
- */
- if ((node->type != ACPI_TYPE_DEVICE) &&
- (node->type != ACPI_TYPE_PROCESSOR) &&
- (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- if (handler == ACPI_DEFAULT_HANDLER) {
- flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
-
- switch (space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- handler = acpi_ex_system_memory_space_handler;
- setup = acpi_ev_system_memory_region_setup;
- break;
-
- case ACPI_ADR_SPACE_SYSTEM_IO:
- handler = acpi_ex_system_io_space_handler;
- setup = acpi_ev_io_space_region_setup;
- break;
-
- case ACPI_ADR_SPACE_PCI_CONFIG:
- handler = acpi_ex_pci_config_space_handler;
- setup = acpi_ev_pci_config_region_setup;
- break;
-
- case ACPI_ADR_SPACE_CMOS:
- handler = acpi_ex_cmos_space_handler;
- setup = acpi_ev_cmos_region_setup;
- break;
-
- case ACPI_ADR_SPACE_PCI_BAR_TARGET:
- handler = acpi_ex_pci_bar_space_handler;
- setup = acpi_ev_pci_bar_region_setup;
- break;
-
- case ACPI_ADR_SPACE_DATA_TABLE:
- handler = acpi_ex_data_table_space_handler;
- setup = NULL;
- break;
-
- default:
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
- }
-
- /* If the caller hasn't specified a setup routine, use the default */
-
- if (!setup) {
- setup = acpi_ev_default_region_setup;
- }
-
- /* Check for an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
- /*
- * The attached device object already exists. Make sure the handler
- * is not already installed.
- */
- handler_obj = obj_desc->device.handler;
-
- /* Walk the handler list for this device */
-
- while (handler_obj) {
-
- /* Same space_id indicates a handler already installed */
-
- if (handler_obj->address_space.space_id == space_id) {
- if (handler_obj->address_space.handler ==
- handler) {
- /*
- * It is (relatively) OK to attempt to install the SAME
- * handler twice. This can easily happen with the
- * PCI_Config space.
- */
- status = AE_SAME_HANDLER;
- goto unlock_and_exit;
- } else {
- /* A handler is already installed */
-
- status = AE_ALREADY_EXISTS;
- }
- goto unlock_and_exit;
- }
-
- /* Walk the linked list of handlers */
-
- handler_obj = handler_obj->address_space.next;
- }
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Creating object on Device %p while installing handler\n",
- node));
-
- /* obj_desc does not exist, create one */
-
- if (node->type == ACPI_TYPE_ANY) {
- type = ACPI_TYPE_DEVICE;
- } else {
- type = node->type;
- }
-
- obj_desc = acpi_ut_create_internal_object(type);
- if (!obj_desc) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
- /* Init new descriptor */
-
- obj_desc->common.type = (u8) type;
-
- /* Attach the new object to the Node */
-
- status = acpi_ns_attach_object(node, obj_desc, type);
-
- /* Remove local reference to the object */
-
- acpi_ut_remove_reference(obj_desc);
-
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
- acpi_ut_get_region_name(space_id), space_id,
- acpi_ut_get_node_name(node), node, obj_desc));
-
- /*
- * Install the handler
+ * The _REG method has two arguments:
*
- * At this point there is no existing handler. Just allocate the object
- * for the handler and link it into the list.
+ * arg0 - Integer:
+ * Operation region space ID Same value as region_obj->Region.space_id
+ *
+ * arg1 - Integer:
+ * connection status 1 for connecting the handler, 0 for disconnecting
+ * the handler (Passed as a parameter)
*/
- handler_obj =
- acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
- if (!handler_obj) {
+ args[0] =
+ acpi_ut_create_integer_object((u64)region_obj->region.space_id);
+ if (!args[0]) {
status = AE_NO_MEMORY;
- goto unlock_and_exit;
+ goto cleanup1;
}
- /* Init handler obj */
+ args[1] = acpi_ut_create_integer_object((u64)function);
+ if (!args[1]) {
+ status = AE_NO_MEMORY;
+ goto cleanup2;
+ }
- handler_obj->address_space.space_id = (u8) space_id;
- handler_obj->address_space.handler_flags = flags;
- handler_obj->address_space.region_list = NULL;
- handler_obj->address_space.node = node;
- handler_obj->address_space.handler = handler;
- handler_obj->address_space.context = context;
- handler_obj->address_space.setup = setup;
+ args[2] = NULL; /* Terminate list */
- /* Install at head of Device.address_space list */
+ /* Execute the method, no return value */
- handler_obj->address_space.next = obj_desc->device.handler;
+ ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+ (ACPI_TYPE_METHOD, info->prefix_node, NULL));
- /*
- * The Device object is the first reference on the handler_obj.
- * Each region that uses the handler adds a reference.
- */
- obj_desc->device.handler = handler_obj;
+ status = acpi_ns_evaluate(info);
+ acpi_ut_remove_reference(args[1]);
- /*
- * Walk the namespace finding all of the regions this
- * handler will manage.
- *
- * Start at the device and search the branch toward
- * the leaf nodes until either the leaf is encountered or
- * a device is detected that has an address handler of the
- * same type.
- *
- * In either case, back up and search down the remainder
- * of the branch
- */
- status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
- ACPI_NS_WALK_UNLOCK,
- acpi_ev_install_handler, NULL,
- handler_obj, NULL);
+ cleanup2:
+ acpi_ut_remove_reference(args[0]);
- unlock_and_exit:
+ cleanup1:
+ ACPI_FREE(info);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 1474241..3bb6167 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c
index f9661e2..f4b43be 100644
--- a/drivers/acpi/acpica/evsci.c
+++ b/drivers/acpi/acpica/evsci.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -89,7 +89,7 @@
*/
interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
- return_UINT32(interrupt_handled);
+ return_VALUE(interrupt_handled);
}
/*******************************************************************************
@@ -120,7 +120,7 @@
interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
- return_UINT32(interrupt_handled);
+ return_VALUE(interrupt_handled);
}
/******************************************************************************
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index ae668f3..ddffd68 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -56,13 +56,13 @@
*
* FUNCTION: acpi_install_notify_handler
*
- * PARAMETERS: Device - The device for which notifies will be handled
+ * PARAMETERS: device - The device for which notifies will be handled
* handler_type - The type of handler:
* ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
* ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
* ACPI_ALL_NOTIFY: Both System and Device
- * Handler - Address of the handler
- * Context - Value passed to the handler on each GPE
+ * handler - Address of the handler
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
@@ -217,12 +217,12 @@
*
* FUNCTION: acpi_remove_notify_handler
*
- * PARAMETERS: Device - The device for which the handler is installed
+ * PARAMETERS: device - The device for which the handler is installed
* handler_type - The type of handler:
* ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
* ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
* ACPI_ALL_NOTIFY: Both System and Device
- * Handler - Address of the handler
+ * handler - Address of the handler
*
* RETURN: Status
*
@@ -249,7 +249,8 @@
(handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Make sure all deferred tasks are completed */
+
+ /* Make sure all deferred notify tasks are completed */
acpi_os_wait_events_complete();
@@ -596,7 +597,7 @@
return_ACPI_STATUS(status);
}
- /* Allocate memory for the handler object */
+ /* Allocate and init handler object (before lock) */
handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_handler_info));
if (!handler) {
@@ -622,16 +623,15 @@
goto free_and_exit;
}
- /* Allocate and init handler object */
-
handler->address = address;
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
- handler->original_flags = gpe_event_info->flags &
- (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+ handler->original_flags = (u8)(gpe_event_info->flags &
+ (ACPI_GPE_XRUPT_TYPE_MASK |
+ ACPI_GPE_DISPATCH_MASK));
/*
- * If the GPE is associated with a method, it might have been enabled
+ * If the GPE is associated with a method, it may have been enabled
* automatically during initialization, in which case it has to be
* disabled now to avoid spurious execution of the handler.
*/
@@ -646,7 +646,7 @@
gpe_event_info->dispatch.handler = handler;
- /* Setup up dispatch flags to indicate handler (vs. method) */
+ /* Setup up dispatch flags to indicate handler (vs. method/notify) */
gpe_event_info->flags &=
~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
@@ -697,7 +697,7 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Make sure all deferred tasks are completed */
+ /* Make sure all deferred GPE tasks are completed */
acpi_os_wait_events_complete();
@@ -747,10 +747,10 @@
* enabled, it should be enabled at this point to restore the
* post-initialization configuration.
*/
-
- if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
- && handler->originally_enabled)
+ if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) &&
+ handler->originally_enabled) {
(void)acpi_ev_add_gpe_reference(gpe_event_info);
+ }
/* Now we can free the handler object */
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 35520c6..d6e4e42 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -61,7 +61,6 @@
* DESCRIPTION: Transfers the system into ACPI mode.
*
******************************************************************************/
-
acpi_status acpi_enable(void)
{
acpi_status status;
@@ -210,8 +209,8 @@
*
* FUNCTION: acpi_disable_event
*
- * PARAMETERS: Event - The fixed eventto be enabled
- * Flags - Reserved
+ * PARAMETERS: event - The fixed event to be disabled
+ * flags - Reserved
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 3f30e75..aff4cc2 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,7 +51,7 @@
ACPI_MODULE_NAME("evxfgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
-/******************************************************************************
+/*******************************************************************************
*
* FUNCTION: acpi_update_all_gpes
*
@@ -172,6 +172,7 @@
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
+
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
@@ -225,7 +226,7 @@
ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
}
- /* Validate WakeDevice is of type Device */
+ /* Validate wake_device is of type Device */
if (device_node->type != ACPI_TYPE_DEVICE) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
@@ -432,8 +433,8 @@
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
- * event_status - Where the current status of the event will
- * be returned
+ * event_status - Where the current status of the event
+ * will be returned
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index 96b412d..96c9e5f 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 16219bd..d93b70b 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -48,6 +48,7 @@
#include "actables.h"
#include "acdispat.h"
#include "acevents.h"
+#include "amlcode.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exconfig")
@@ -120,8 +121,11 @@
acpi_ns_exec_module_code_list();
acpi_ex_enter_interpreter();
- /* Update GPEs for any new _Lxx/_Exx methods. Ignore errors */
-
+ /*
+ * Update GPEs for any new _Lxx/_Exx methods. Ignore errors. The host is
+ * responsible for discovering any new wake GPEs by running _PRW methods
+ * that may have been loaded by this table.
+ */
status = acpi_tb_get_owner_id(table_index, &owner_id);
if (ACPI_SUCCESS(status)) {
acpi_ev_update_gpes(owner_id);
@@ -158,12 +162,12 @@
ACPI_FUNCTION_TRACE(ex_load_table_op);
- /* Validate lengths for the signature_string, OEMIDString, OEMtable_iD */
+ /* Validate lengths for the Signature, oem_id, and oem_table_id strings */
if ((operand[0]->string.length > ACPI_NAME_SIZE) ||
(operand[1]->string.length > ACPI_OEM_ID_SIZE) ||
(operand[2]->string.length > ACPI_OEM_TABLE_ID_SIZE)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ return_ACPI_STATUS(AE_AML_STRING_LIMIT);
}
/* Find the ACPI table in the RSDT/XSDT */
@@ -210,8 +214,8 @@
/* parameter_path (optional parameter) */
if (operand[4]->string.length > 0) {
- if ((operand[4]->string.pointer[0] != '\\') &&
- (operand[4]->string.pointer[0] != '^')) {
+ if ((operand[4]->string.pointer[0] != AML_ROOT_PREFIX) &&
+ (operand[4]->string.pointer[0] != AML_PARENT_PREFIX)) {
/*
* Path is not absolute, so it will be relative to the node
* referenced by the root_path_string (or the NS root if omitted)
@@ -301,7 +305,7 @@
acpi_ev_address_space_dispatch(obj_desc, NULL, ACPI_READ,
region_offset, 8, &value);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
*buffer = (u8)value;
@@ -309,7 +313,7 @@
region_offset++;
}
- return AE_OK;
+ return (AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index 4492a4e..d2b9613 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -176,7 +176,7 @@
/* Save the Result */
- acpi_ex_truncate_for32bit_table(return_desc);
+ (void)acpi_ex_truncate_for32bit_table(return_desc);
*result_desc = return_desc;
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 66554bc..26a13f6 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c
index d7c9f516..7eb853c 100644
--- a/drivers/acpi/acpica/exdebug.c
+++ b/drivers/acpi/acpica/exdebug.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 858b43a..e5a3c24 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -464,9 +464,8 @@
ACPI_FUNCTION_NAME(ex_dump_operand)
- if (!
- ((ACPI_LV_EXEC & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+ /* Check if debug output enabled */
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_EXEC, _COMPONENT)) {
return;
}
@@ -811,9 +810,10 @@
ACPI_FUNCTION_ENTRY();
if (!flags) {
- if (!
- ((ACPI_LV_OBJECTS & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_OBJECTS, _COMPONENT)) {
return;
}
}
@@ -999,9 +999,10 @@
}
if (!flags) {
- if (!
- ((ACPI_LV_OBJECTS & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_OBJECTS, _COMPONENT)) {
return_VOID;
}
}
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index ebc55fb..7d4bae7 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index aa2ccfb..ec7f569 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -329,7 +329,6 @@
static u8
acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value)
{
- ACPI_FUNCTION_NAME(ex_register_overflow);
if (obj_desc->common_field.bit_length >= ACPI_INTEGER_BIT_SIZE) {
/*
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 8405870..72a2a13 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index d1f449d..7be0205 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -377,7 +377,8 @@
return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
}
- /* Must have a valid thread. */
+ /* Must have a valid thread ID */
+
if (!walk_state->thread) {
ACPI_ERROR((AE_INFO,
"Cannot release Mutex [%4.4s], null thread info",
diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c
index 2ff578a..14689de 100644
--- a/drivers/acpi/acpica/exnames.c
+++ b/drivers/acpi/acpica/exnames.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index bbf01e9..b60c877 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -948,13 +948,7 @@
*/
return_desc =
acpi_ut_create_integer_object((u64)
- temp_desc->
- buffer.
- pointer
- [operand
- [0]->
- reference.
- value]);
+ temp_desc->buffer.pointer[operand[0]->reference.value]);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c
index ee5634a..e491e46 100644
--- a/drivers/acpi/acpica/exoparg2.c
+++ b/drivers/acpi/acpica/exoparg2.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c
index 2c89b46..2d7491f 100644
--- a/drivers/acpi/acpica/exoparg3.c
+++ b/drivers/acpi/acpica/exoparg3.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index 3e08695..b76b970 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index ba9db4d..d6eab81 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -276,7 +276,7 @@
/* Invalid field access type */
ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access));
- return_UINT32(0);
+ return_VALUE(0);
}
if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
@@ -289,7 +289,7 @@
}
*return_byte_alignment = byte_alignment;
- return_UINT32(bit_length);
+ return_VALUE(bit_length);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 1db2c0b..182abaf 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -142,9 +142,9 @@
}
/*
- * Attempt to map from the requested address to the end of the region.
- * However, we will never map more than one page, nor will we cross
- * a page boundary.
+ * October 2009: Attempt to map from the requested address to the
+ * end of the region. However, we will never map more than one
+ * page, nor will we cross a page boundary.
*/
map_length = (acpi_size)
((mem_info->address + mem_info->length) - address);
@@ -154,12 +154,15 @@
* a page boundary, just map up to the page boundary, do not cross.
* On some systems, crossing a page boundary while mapping regions
* can cause warnings if the pages have different attributes
- * due to resource management
+ * due to resource management.
+ *
+ * This has the added benefit of constraining a single mapping to
+ * one page, which is similar to the original code that used a 4k
+ * maximum window.
*/
page_boundary_map_length =
ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
-
- if (!page_boundary_map_length) {
+ if (page_boundary_map_length == 0) {
page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
}
@@ -236,19 +239,19 @@
switch (bit_width) {
case 8:
- ACPI_SET8(logical_addr_ptr) = (u8) * value;
+ ACPI_SET8(logical_addr_ptr, *value);
break;
case 16:
- ACPI_SET16(logical_addr_ptr) = (u16) * value;
+ ACPI_SET16(logical_addr_ptr, *value);
break;
case 32:
- ACPI_SET32(logical_addr_ptr) = (u32) * value;
+ ACPI_SET32(logical_addr_ptr, *value);
break;
case 64:
- ACPI_SET64(logical_addr_ptr) = (u64) * value;
+ ACPI_SET64(logical_addr_ptr, *value);
break;
default:
diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c
index 6239956..8565b6b 100644
--- a/drivers/acpi/acpica/exresnte.c
+++ b/drivers/acpi/acpica/exresnte.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index cc176b2..e4f9dfb 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index b9ebff2..9fb9f5e 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 90431f1..93c6049 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -487,14 +487,33 @@
default:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "Storing %s (%p) directly into node (%p) with no implicit conversion\n",
+ "Storing [%s] (%p) directly into node [%s] (%p)"
+ " with no implicit conversion\n",
acpi_ut_get_object_type_name(source_desc),
- source_desc, node));
+ source_desc,
+ acpi_ut_get_object_type_name(target_desc),
+ node));
- /* No conversions for all other types. Just attach the source object */
+ /*
+ * No conversions for all other types. Directly store a copy of
+ * the source object. NOTE: This is a departure from the ACPI
+ * spec, which states "If conversion is impossible, abort the
+ * running control method".
+ *
+ * This code implements "If conversion is impossible, treat the
+ * Store operation as a CopyObject".
+ */
+ status =
+ acpi_ut_copy_iobject_to_iobject(source_desc, &new_desc,
+ walk_state);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
- status = acpi_ns_attach_object(node, source_desc,
- source_desc->common.type);
+ status =
+ acpi_ns_attach_object(node, new_desc,
+ new_desc->common.type);
+ acpi_ut_remove_reference(new_desc);
break;
}
diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c
index 87153bb..1cefe77 100644
--- a/drivers/acpi/acpica/exstoren.c
+++ b/drivers/acpi/acpica/exstoren.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -253,7 +253,7 @@
/* Truncate value if we are executing from a 32-bit ACPI table */
- acpi_ex_truncate_for32bit_table(dest_desc);
+ (void)acpi_ex_truncate_for32bit_table(dest_desc);
break;
case ACPI_TYPE_STRING:
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index b5f339c..26e3710 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index c8a0ad5..6578dee 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index 264d22d..b205cbb 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -202,35 +202,39 @@
*
* PARAMETERS: obj_desc - Object to be truncated
*
- * RETURN: none
+ * RETURN: TRUE if a truncation was performed, FALSE otherwise.
*
* DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
* 32-bit, as determined by the revision of the DSDT.
*
******************************************************************************/
-void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc)
+u8 acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc)
{
ACPI_FUNCTION_ENTRY();
/*
* Object must be a valid number and we must be executing
- * a control method. NS node could be there for AML_INT_NAMEPATH_OP.
+ * a control method. Object could be NS node for AML_INT_NAMEPATH_OP.
*/
if ((!obj_desc) ||
(ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) ||
(obj_desc->common.type != ACPI_TYPE_INTEGER)) {
- return;
+ return (FALSE);
}
- if (acpi_gbl_integer_byte_width == 4) {
+ if ((acpi_gbl_integer_byte_width == 4) &&
+ (obj_desc->integer.value > (u64)ACPI_UINT32_MAX)) {
/*
- * We are running a method that exists in a 32-bit ACPI table.
+ * We are executing in a 32-bit ACPI table.
* Truncate the value to 32 bits by zeroing out the upper 32-bit field
*/
- obj_desc->integer.value &= (u64) ACPI_UINT32_MAX;
+ obj_desc->integer.value &= (u64)ACPI_UINT32_MAX;
+ return (TRUE);
}
+
+ return (FALSE);
}
/*******************************************************************************
@@ -336,7 +340,7 @@
/* u64 is unsigned, so we don't worry about a '-' prefix */
if (value == 0) {
- return_UINT32(1);
+ return_VALUE(1);
}
current_value = value;
@@ -350,7 +354,7 @@
num_digits++;
}
- return_UINT32(num_digits);
+ return_VALUE(num_digits);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index 90a9aea..deb3f61 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -108,8 +108,7 @@
* enable bits to default
*/
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
- (u32) acpi_gbl_FADT.acpi_disable,
- 8);
+ (u32)acpi_gbl_FADT.acpi_disable, 8);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Attempting to enable Legacy (non-ACPI) mode\n"));
break;
@@ -152,18 +151,18 @@
* system does not support mode transition.
*/
if (!acpi_gbl_FADT.smi_command) {
- return_UINT32(ACPI_SYS_MODE_ACPI);
+ return_VALUE(ACPI_SYS_MODE_ACPI);
}
status = acpi_read_bit_register(ACPI_BITREG_SCI_ENABLE, &value);
if (ACPI_FAILURE(status)) {
- return_UINT32(ACPI_SYS_MODE_LEGACY);
+ return_VALUE(ACPI_SYS_MODE_LEGACY);
}
if (value) {
- return_UINT32(ACPI_SYS_MODE_ACPI);
+ return_VALUE(ACPI_SYS_MODE_ACPI);
} else {
- return_UINT32(ACPI_SYS_MODE_LEGACY);
+ return_VALUE(ACPI_SYS_MODE_LEGACY);
}
}
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 94996f9..5e5f762 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -200,7 +200,6 @@
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * flags - Reserved, set to zero
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 6456004..20d02e9 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -69,8 +69,10 @@
u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info)
{
- return (u32)1 << (gpe_event_info->gpe_number -
- gpe_event_info->register_info->base_gpe_number);
+
+ return ((u32)1 <<
+ (gpe_event_info->gpe_number -
+ gpe_event_info->register_info->base_gpe_number));
}
/******************************************************************************
@@ -133,7 +135,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u\n", action));
+ ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action));
return (AE_BAD_PARAMETER);
}
diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c
index 65bc345..0889a62 100644
--- a/drivers/acpi/acpica/hwpci.c
+++ b/drivers/acpi/acpica/hwpci.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index f4e5750..083d655 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,7 +44,6 @@
#include <acpi/acpi.h>
#include "accommon.h"
-#include "acnamesp.h"
#include "acevents.h"
#define _COMPONENT ACPI_HARDWARE
@@ -364,8 +363,7 @@
* DESCRIPTION: Read from the specified ACPI register
*
******************************************************************************/
-acpi_status
-acpi_hw_register_read(u32 register_id, u32 * return_value)
+acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value)
{
u32 value = 0;
acpi_status status;
@@ -485,7 +483,7 @@
&acpi_gbl_xpm1b_status);
break;
- case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access */
+ case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access each */
status = acpi_hw_write_multiple(value,
&acpi_gbl_xpm1a_enable,
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 3fddde0..e3828cc 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,7 +45,6 @@
#include <acpi/acpi.h>
#include <linux/acpi.h>
#include "accommon.h"
-#include <linux/module.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
@@ -178,7 +177,7 @@
* to still read the right value. Ideally, this block would go
* away entirely.
*/
- acpi_os_stall(10000000);
+ acpi_os_stall(10 * ACPI_USEC_PER_SEC);
status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL,
sleep_enable_reg_info->
@@ -323,7 +322,8 @@
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
- acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1);
+ (void)acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS,
+ ACPI_CLEAR_STATUS);
acpi_gbl_system_awake_and_running = TRUE;
/* Enable power button */
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index bfdce22..0c1a8bb 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -176,10 +176,11 @@
/*
* Compute Duration (Requires a 64-bit multiply and divide):
*
- * time_elapsed = (delta_ticks * 1000000) / PM_TIMER_FREQUENCY;
+ * time_elapsed (microseconds) =
+ * (delta_ticks * ACPI_USEC_PER_SEC) / ACPI_PM_TIMER_FREQUENCY;
*/
- status = acpi_ut_short_divide(((u64) delta_ticks) * 1000000,
- PM_TIMER_FREQUENCY, "ient, NULL);
+ status = acpi_ut_short_divide(((u64)delta_ticks) * ACPI_USEC_PER_SEC,
+ ACPI_PM_TIMER_FREQUENCY, "ient, NULL);
*time_elapsed = (u32) quotient;
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index b6aae58..eab70d5 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -135,7 +135,7 @@
if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) {
ACPI_ERROR((AE_INFO,
"Bad BitWidth parameter: %8.8X", bit_width));
- return AE_BAD_PARAMETER;
+ return (AE_BAD_PARAMETER);
}
port_info = acpi_protected_ports;
@@ -234,11 +234,11 @@
status = acpi_hw_validate_io_request(address, width);
if (ACPI_SUCCESS(status)) {
status = acpi_os_read_port(address, value, width);
- return status;
+ return (status);
}
if (status != AE_AML_ILLEGAL_ADDRESS) {
- return status;
+ return (status);
}
/*
@@ -253,7 +253,7 @@
if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
status = acpi_os_read_port(address, &one_byte, 8);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
*value |= (one_byte << i);
@@ -262,7 +262,7 @@
address++;
}
- return AE_OK;
+ return (AE_OK);
}
/******************************************************************************
@@ -297,11 +297,11 @@
status = acpi_hw_validate_io_request(address, width);
if (ACPI_SUCCESS(status)) {
status = acpi_os_write_port(address, value, width);
- return status;
+ return (status);
}
if (status != AE_AML_ILLEGAL_ADDRESS) {
- return status;
+ return (status);
}
/*
@@ -317,12 +317,12 @@
status =
acpi_os_write_port(address, (value >> i) & 0xFF, 8);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
}
address++;
}
- return AE_OK;
+ return (AE_OK);
}
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 05a154c..04c2e16 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -80,10 +80,10 @@
if (reset_reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
/*
- * For I/O space, write directly to the OSL. This
- * bypasses the port validation mechanism, which may
- * block a valid write to the reset register. Spec
- * section 4.7.3.6 requires register width to be 8.
+ * For I/O space, write directly to the OSL. This bypasses the port
+ * validation mechanism, which may block a valid write to the reset
+ * register.
+ * Spec section 4.7.3.6 requires register width to be 8.
*/
status =
acpi_os_write_port((acpi_io_address) reset_reg->address,
@@ -333,7 +333,7 @@
* FUNCTION: acpi_write_bit_register
*
* PARAMETERS: register_id - ID of ACPI Bit Register to access
- * Value - Value to write to the register, in bit
+ * value - Value to write to the register, in bit
* position zero. The bit is automatically
* shifted to the correct position.
*
@@ -440,17 +440,41 @@
* *sleep_type_a - Where SLP_TYPa is returned
* *sleep_type_b - Where SLP_TYPb is returned
*
- * RETURN: status - ACPI status
+ * RETURN: Status
*
- * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
- * state.
+ * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested
+ * sleep state via the appropriate \_Sx object.
+ *
+ * The sleep state package returned from the corresponding \_Sx_ object
+ * must contain at least one integer.
+ *
+ * March 2005:
+ * Added support for a package that contains two integers. This
+ * goes against the ACPI specification which defines this object as a
+ * package with one encoded DWORD integer. However, existing practice
+ * by many BIOS vendors is to return a package with 2 or more integer
+ * elements, at least one per sleep type (A/B).
+ *
+ * January 2013:
+ * Therefore, we must be prepared to accept a package with either a
+ * single integer or multiple integers.
+ *
+ * The single integer DWORD format is as follows:
+ * BYTE 0 - Value for the PM1A SLP_TYP register
+ * BYTE 1 - Value for the PM1B SLP_TYP register
+ * BYTE 2-3 - Reserved
+ *
+ * The dual integer format is as follows:
+ * Integer 0 - Value for the PM1A SLP_TYP register
+ * Integer 1 - Value for the PM1A SLP_TYP register
*
******************************************************************************/
acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
{
- acpi_status status = AE_OK;
+ acpi_status status;
struct acpi_evaluate_info *info;
+ union acpi_operand_object **elements;
ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
@@ -467,18 +491,14 @@
return_ACPI_STATUS(AE_NO_MEMORY);
}
+ /*
+ * Evaluate the \_Sx namespace object containing the register values
+ * for this state
+ */
info->pathname =
ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
-
- /* Evaluate the namespace object containing the values for this state */
-
status = acpi_ns_evaluate(info);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "%s while evaluating SleepState [%s]\n",
- acpi_format_exception(status),
- info->pathname));
-
goto cleanup;
}
@@ -487,64 +507,67 @@
if (!info->return_object) {
ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
info->pathname));
- status = AE_NOT_EXIST;
+ status = AE_AML_NO_RETURN_VALUE;
+ goto cleanup;
}
- /* It must be of type Package */
+ /* Return object must be of type Package */
- else if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
+ if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
ACPI_ERROR((AE_INFO,
"Sleep State return object is not a Package"));
status = AE_AML_OPERAND_TYPE;
+ goto cleanup1;
}
/*
- * The package must have at least two elements. NOTE (March 2005): This
- * goes against the current ACPI spec which defines this object as a
- * package with one encoded DWORD element. However, existing practice
- * by BIOS vendors seems to be to have 2 or more elements, at least
- * one per sleep type (A/B).
+ * Any warnings about the package length or the object types have
+ * already been issued by the predefined name module -- there is no
+ * need to repeat them here.
*/
- else if (info->return_object->package.count < 2) {
- ACPI_ERROR((AE_INFO,
- "Sleep State return package does not have at least two elements"));
- status = AE_AML_NO_OPERAND;
+ elements = info->return_object->package.elements;
+ switch (info->return_object->package.count) {
+ case 0:
+ status = AE_AML_PACKAGE_LIMIT;
+ break;
+
+ case 1:
+ if (elements[0]->common.type != ACPI_TYPE_INTEGER) {
+ status = AE_AML_OPERAND_TYPE;
+ break;
+ }
+
+ /* A valid _Sx_ package with one integer */
+
+ *sleep_type_a = (u8)elements[0]->integer.value;
+ *sleep_type_b = (u8)(elements[0]->integer.value >> 8);
+ break;
+
+ case 2:
+ default:
+ if ((elements[0]->common.type != ACPI_TYPE_INTEGER) ||
+ (elements[1]->common.type != ACPI_TYPE_INTEGER)) {
+ status = AE_AML_OPERAND_TYPE;
+ break;
+ }
+
+ /* A valid _Sx_ package with two integers */
+
+ *sleep_type_a = (u8)elements[0]->integer.value;
+ *sleep_type_b = (u8)elements[1]->integer.value;
+ break;
}
- /* The first two elements must both be of type Integer */
-
- else if (((info->return_object->package.elements[0])->common.type
- != ACPI_TYPE_INTEGER) ||
- ((info->return_object->package.elements[1])->common.type
- != ACPI_TYPE_INTEGER)) {
- ACPI_ERROR((AE_INFO,
- "Sleep State return package elements are not both Integers "
- "(%s, %s)",
- acpi_ut_get_object_type_name(info->return_object->
- package.elements[0]),
- acpi_ut_get_object_type_name(info->return_object->
- package.elements[1])));
- status = AE_AML_OPERAND_TYPE;
- } else {
- /* Valid _Sx_ package size, type, and value */
-
- *sleep_type_a = (u8)
- (info->return_object->package.elements[0])->integer.value;
- *sleep_type_b = (u8)
- (info->return_object->package.elements[1])->integer.value;
- }
-
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "While evaluating SleepState [%s], bad Sleep object %p type %s",
- info->pathname, info->return_object,
- acpi_ut_get_object_type_name(info->
- return_object)));
- }
-
+ cleanup1:
acpi_ut_remove_reference(info->return_object);
cleanup:
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While evaluating Sleep State [%s]",
+ info->pathname));
+ }
+
ACPI_FREE(info);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index ae443fe2..35eebda 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -41,9 +41,9 @@
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
-#include <linux/module.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwxfsleep")
@@ -207,7 +207,7 @@
(u32)acpi_gbl_FADT.s4_bios_request, 8);
do {
- acpi_os_stall(1000);
+ acpi_os_stall(ACPI_USEC_PER_MSEC);
status =
acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
if (ACPI_FAILURE(status)) {
@@ -350,7 +350,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
+ * DESCRIPTION: Enter a system sleep state
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
@@ -382,8 +382,9 @@
* RETURN: Status
*
* DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
- * sleep.
- * Called with interrupts DISABLED.
+ * sleep. Called with interrupts DISABLED.
+ * We break wake/resume into 2 stages so that OSPM can handle
+ * various OS-specific tasks between the two steps.
*
******************************************************************************/
acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index d70eaf3..8769cf8 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 15143c4..2437373 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 924b3c7..ce6e973 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,6 +44,7 @@
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
+#include <acpi/acoutput.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsdump")
@@ -77,8 +78,9 @@
ACPI_FUNCTION_NAME(ns_print_pathname);
- if (!(acpi_dbg_level & ACPI_LV_NAMES)
- || !(acpi_dbg_layer & ACPI_NAMESPACE)) {
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_NAMES, ACPI_NAMESPACE)) {
return;
}
@@ -127,7 +129,7 @@
/* Do this only if the requested debug level and component are enabled */
- if (!(acpi_dbg_level & level) || !(acpi_dbg_layer & component)) {
+ if (!ACPI_IS_DEBUG_ENABLED(level, component)) {
return_VOID;
}
@@ -729,5 +731,5 @@
ACPI_OWNER_ID_MAX, search_handle);
return_VOID;
}
-#endif /* _ACPI_ASL_COMPILER */
-#endif /* defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER) */
+#endif
+#endif
diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c
index 944d4c8..409ae80 100644
--- a/drivers/acpi/acpica/nsdumpdv.c
+++ b/drivers/acpi/acpica/nsdumpdv.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -42,7 +42,6 @@
*/
#include <acpi/acpi.h>
-#include "accommon.h"
/* TBD: This entire module is apparently obsolete and should be removed */
diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c
index 69074be..1538f3eb 100644
--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 4328e2a..2a431ec 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -46,7 +46,6 @@
#include "acnamesp.h"
#include "acdispat.h"
#include "acinterp.h"
-#include <linux/nmi.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsinit")
@@ -87,7 +86,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"**** Starting initialization of namespace objects ****\n"));
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
- "Completing Region/Field/Buffer/Package initialization:"));
+ "Completing Region/Field/Buffer/Package initialization:\n"));
/* Set all init info to zero */
@@ -103,7 +102,7 @@
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
- "\nInitialized %u/%u Regions %u/%u Fields %u/%u "
+ " Initialized %u/%u Regions %u/%u Fields %u/%u "
"Buffers %u/%u Packages (%u nodes)\n",
info.op_region_init, info.op_region_count,
info.field_init, info.field_count,
@@ -150,7 +149,7 @@
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"Initializing Device/Processor/Thermal objects "
- "by executing _INI methods:"));
+ "and executing _INI/_STA methods:\n"));
/* Tree analysis: find all subtrees that contain _INI methods */
@@ -208,7 +207,7 @@
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
- "\nExecuted %u _INI methods requiring %u _STA executions "
+ " Executed %u _INI methods requiring %u _STA executions "
"(examined %u objects)\n",
info.num_INI, info.num_STA, info.device_count));
@@ -350,14 +349,6 @@
}
/*
- * Print a dot for each object unless we are going to print the entire
- * pathname
- */
- if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
- }
-
- /*
* We ignore errors from above, and always return OK, since we don't want
* to abort the walk on any single error.
*/
@@ -572,20 +563,10 @@
info->parameters = NULL;
info->flags = ACPI_IGNORE_RETURN_VALUE;
- /*
- * Some hardware relies on this being executed as atomically
- * as possible (without an NMI being received in the middle of
- * this) - so disable NMIs and initialize the device:
- */
status = acpi_ns_evaluate(info);
if (ACPI_SUCCESS(status)) {
walk_info->num_INI++;
-
- if ((acpi_dbg_level <= ACPI_LV_ALL_EXCEPTIONS) &&
- (!(acpi_dbg_level & ACPI_LV_INFO))) {
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
- }
}
#ifdef ACPI_DEBUG_OUTPUT
else if (status != AE_NOT_FOUND) {
diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c
index 911f991..0a7badc 100644
--- a/drivers/acpi/acpica/nsload.c
+++ b/drivers/acpi/acpica/nsload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 55a175e..90a0380 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -126,7 +126,8 @@
* the node, In external format (name segments separated by path
* separators.)
*
- * DESCRIPTION: Used for debug printing in acpi_ns_search_table().
+ * DESCRIPTION: Used to obtain the full pathname to a namespace node, usually
+ * for error and debug statements.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index e69f7fa..7a736f4 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c
index 233f756..35dde81 100644
--- a/drivers/acpi/acpica/nsparse.c
+++ b/drivers/acpi/acpica/nsparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index 2419f41..224c300 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -1,12 +1,11 @@
/******************************************************************************
*
* Module Name: nspredef - Validation of ACPI predefined methods and objects
- * $Revision: 1.1 $
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -74,27 +73,6 @@
******************************************************************************/
/* Local prototypes */
static acpi_status
-acpi_ns_check_package(struct acpi_predefined_data *data,
- union acpi_operand_object **return_object_ptr);
-
-static acpi_status
-acpi_ns_check_package_list(struct acpi_predefined_data *data,
- const union acpi_predefined_info *package,
- union acpi_operand_object **elements, u32 count);
-
-static acpi_status
-acpi_ns_check_package_elements(struct acpi_predefined_data *data,
- union acpi_operand_object **elements,
- u8 type1,
- u32 count1,
- u8 type2, u32 count2, u32 start_index);
-
-static acpi_status
-acpi_ns_check_object_type(struct acpi_predefined_data *data,
- union acpi_operand_object **return_object_ptr,
- u32 expected_btypes, u32 package_index);
-
-static acpi_status
acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object);
@@ -148,7 +126,7 @@
pathname = acpi_ns_get_external_pathname(node);
if (!pathname) {
- return AE_OK; /* Could not get pathname, ignore */
+ return (AE_OK); /* Could not get pathname, ignore */
}
/*
@@ -408,564 +386,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ns_check_package
- *
- * PARAMETERS: data - Pointer to validation data structure
- * return_object_ptr - Pointer to the object returned from the
- * evaluation of a method or object
- *
- * RETURN: Status
- *
- * DESCRIPTION: Check a returned package object for the correct count and
- * correct type of all sub-objects.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ns_check_package(struct acpi_predefined_data *data,
- union acpi_operand_object **return_object_ptr)
-{
- union acpi_operand_object *return_object = *return_object_ptr;
- const union acpi_predefined_info *package;
- union acpi_operand_object **elements;
- acpi_status status = AE_OK;
- u32 expected_count;
- u32 count;
- u32 i;
-
- ACPI_FUNCTION_NAME(ns_check_package);
-
- /* The package info for this name is in the next table entry */
-
- package = data->predefined + 1;
-
- ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "%s Validating return Package of Type %X, Count %X\n",
- data->pathname, package->ret_info.type,
- return_object->package.count));
-
- /*
- * For variable-length Packages, we can safely remove all embedded
- * and trailing NULL package elements
- */
- acpi_ns_remove_null_elements(data, package->ret_info.type,
- return_object);
-
- /* Extract package count and elements array */
-
- elements = return_object->package.elements;
- count = return_object->package.count;
-
- /* The package must have at least one element, else invalid */
-
- if (!count) {
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
- "Return Package has no elements (empty)"));
-
- return (AE_AML_OPERAND_VALUE);
- }
-
- /*
- * Decode the type of the expected package contents
- *
- * PTYPE1 packages contain no subpackages
- * PTYPE2 packages contain sub-packages
- */
- switch (package->ret_info.type) {
- case ACPI_PTYPE1_FIXED:
-
- /*
- * The package count is fixed and there are no sub-packages
- *
- * If package is too small, exit.
- * If package is larger than expected, issue warning but continue
- */
- expected_count =
- package->ret_info.count1 + package->ret_info.count2;
- if (count < expected_count) {
- goto package_too_small;
- } else if (count > expected_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
- "%s: Return Package is larger than needed - "
- "found %u, expected %u\n",
- data->pathname, count,
- expected_count));
- }
-
- /* Validate all elements of the returned package */
-
- status = acpi_ns_check_package_elements(data, elements,
- package->ret_info.
- object_type1,
- package->ret_info.
- count1,
- package->ret_info.
- object_type2,
- package->ret_info.
- count2, 0);
- break;
-
- case ACPI_PTYPE1_VAR:
-
- /*
- * The package count is variable, there are no sub-packages, and all
- * elements must be of the same type
- */
- for (i = 0; i < count; i++) {
- status = acpi_ns_check_object_type(data, elements,
- package->ret_info.
- object_type1, i);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- elements++;
- }
- break;
-
- case ACPI_PTYPE1_OPTION:
-
- /*
- * The package count is variable, there are no sub-packages. There are
- * a fixed number of required elements, and a variable number of
- * optional elements.
- *
- * Check if package is at least as large as the minimum required
- */
- expected_count = package->ret_info3.count;
- if (count < expected_count) {
- goto package_too_small;
- }
-
- /* Variable number of sub-objects */
-
- for (i = 0; i < count; i++) {
- if (i < package->ret_info3.count) {
-
- /* These are the required package elements (0, 1, or 2) */
-
- status =
- acpi_ns_check_object_type(data, elements,
- package->
- ret_info3.
- object_type[i],
- i);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- } else {
- /* These are the optional package elements */
-
- status =
- acpi_ns_check_object_type(data, elements,
- package->
- ret_info3.
- tail_object_type,
- i);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
- elements++;
- }
- break;
-
- case ACPI_PTYPE2_REV_FIXED:
-
- /* First element is the (Integer) revision */
-
- status = acpi_ns_check_object_type(data, elements,
- ACPI_RTYPE_INTEGER, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- elements++;
- count--;
-
- /* Examine the sub-packages */
-
- status =
- acpi_ns_check_package_list(data, package, elements, count);
- break;
-
- case ACPI_PTYPE2_PKG_COUNT:
-
- /* First element is the (Integer) count of sub-packages to follow */
-
- status = acpi_ns_check_object_type(data, elements,
- ACPI_RTYPE_INTEGER, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /*
- * Count cannot be larger than the parent package length, but allow it
- * to be smaller. The >= accounts for the Integer above.
- */
- expected_count = (u32) (*elements)->integer.value;
- if (expected_count >= count) {
- goto package_too_small;
- }
-
- count = expected_count;
- elements++;
-
- /* Examine the sub-packages */
-
- status =
- acpi_ns_check_package_list(data, package, elements, count);
- break;
-
- case ACPI_PTYPE2:
- case ACPI_PTYPE2_FIXED:
- case ACPI_PTYPE2_MIN:
- case ACPI_PTYPE2_COUNT:
- case ACPI_PTYPE2_FIX_VAR:
-
- /*
- * These types all return a single Package that consists of a
- * variable number of sub-Packages.
- *
- * First, ensure that the first element is a sub-Package. If not,
- * the BIOS may have incorrectly returned the object as a single
- * package instead of a Package of Packages (a common error if
- * there is only one entry). We may be able to repair this by
- * wrapping the returned Package with a new outer Package.
- */
- if (*elements
- && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
-
- /* Create the new outer package and populate it */
-
- status =
- acpi_ns_wrap_with_package(data, return_object,
- return_object_ptr);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /* Update locals to point to the new package (of 1 element) */
-
- return_object = *return_object_ptr;
- elements = return_object->package.elements;
- count = 1;
- }
-
- /* Examine the sub-packages */
-
- status =
- acpi_ns_check_package_list(data, package, elements, count);
- break;
-
- default:
-
- /* Should not get here if predefined info table is correct */
-
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
- "Invalid internal return type in table entry: %X",
- package->ret_info.type));
-
- return (AE_AML_INTERNAL);
- }
-
- return (status);
-
-package_too_small:
-
- /* Error exit for the case with an incorrect package count */
-
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
- "Return Package is too small - found %u elements, expected %u",
- count, expected_count));
-
- return (AE_AML_OPERAND_VALUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_check_package_list
- *
- * PARAMETERS: data - Pointer to validation data structure
- * package - Pointer to package-specific info for method
- * elements - Element list of parent package. All elements
- * of this list should be of type Package.
- * count - Count of subpackages
- *
- * RETURN: Status
- *
- * DESCRIPTION: Examine a list of subpackages
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ns_check_package_list(struct acpi_predefined_data *data,
- const union acpi_predefined_info *package,
- union acpi_operand_object **elements, u32 count)
-{
- union acpi_operand_object *sub_package;
- union acpi_operand_object **sub_elements;
- acpi_status status;
- u32 expected_count;
- u32 i;
- u32 j;
-
- /*
- * Validate each sub-Package in the parent Package
- *
- * NOTE: assumes list of sub-packages contains no NULL elements.
- * Any NULL elements should have been removed by earlier call
- * to acpi_ns_remove_null_elements.
- */
- for (i = 0; i < count; i++) {
- sub_package = *elements;
- sub_elements = sub_package->package.elements;
- data->parent_package = sub_package;
-
- /* Each sub-object must be of type Package */
-
- status = acpi_ns_check_object_type(data, &sub_package,
- ACPI_RTYPE_PACKAGE, i);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /* Examine the different types of expected sub-packages */
-
- data->parent_package = sub_package;
- switch (package->ret_info.type) {
- case ACPI_PTYPE2:
- case ACPI_PTYPE2_PKG_COUNT:
- case ACPI_PTYPE2_REV_FIXED:
-
- /* Each subpackage has a fixed number of elements */
-
- expected_count =
- package->ret_info.count1 + package->ret_info.count2;
- if (sub_package->package.count < expected_count) {
- goto package_too_small;
- }
-
- status =
- acpi_ns_check_package_elements(data, sub_elements,
- package->ret_info.
- object_type1,
- package->ret_info.
- count1,
- package->ret_info.
- object_type2,
- package->ret_info.
- count2, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
-
- case ACPI_PTYPE2_FIX_VAR:
- /*
- * Each subpackage has a fixed number of elements and an
- * optional element
- */
- expected_count =
- package->ret_info.count1 + package->ret_info.count2;
- if (sub_package->package.count < expected_count) {
- goto package_too_small;
- }
-
- status =
- acpi_ns_check_package_elements(data, sub_elements,
- package->ret_info.
- object_type1,
- package->ret_info.
- count1,
- package->ret_info.
- object_type2,
- sub_package->package.
- count -
- package->ret_info.
- count1, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
-
- case ACPI_PTYPE2_FIXED:
-
- /* Each sub-package has a fixed length */
-
- expected_count = package->ret_info2.count;
- if (sub_package->package.count < expected_count) {
- goto package_too_small;
- }
-
- /* Check the type of each sub-package element */
-
- for (j = 0; j < expected_count; j++) {
- status =
- acpi_ns_check_object_type(data,
- &sub_elements[j],
- package->
- ret_info2.
- object_type[j],
- j);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
- break;
-
- case ACPI_PTYPE2_MIN:
-
- /* Each sub-package has a variable but minimum length */
-
- expected_count = package->ret_info.count1;
- if (sub_package->package.count < expected_count) {
- goto package_too_small;
- }
-
- /* Check the type of each sub-package element */
-
- status =
- acpi_ns_check_package_elements(data, sub_elements,
- package->ret_info.
- object_type1,
- sub_package->package.
- count, 0, 0, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
-
- case ACPI_PTYPE2_COUNT:
-
- /*
- * First element is the (Integer) count of elements, including
- * the count field (the ACPI name is num_elements)
- */
- status = acpi_ns_check_object_type(data, sub_elements,
- ACPI_RTYPE_INTEGER,
- 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /*
- * Make sure package is large enough for the Count and is
- * is as large as the minimum size
- */
- expected_count = (u32)(*sub_elements)->integer.value;
- if (sub_package->package.count < expected_count) {
- goto package_too_small;
- }
- if (sub_package->package.count <
- package->ret_info.count1) {
- expected_count = package->ret_info.count1;
- goto package_too_small;
- }
- if (expected_count == 0) {
- /*
- * Either the num_entries element was originally zero or it was
- * a NULL element and repaired to an Integer of value zero.
- * In either case, repair it by setting num_entries to be the
- * actual size of the subpackage.
- */
- expected_count = sub_package->package.count;
- (*sub_elements)->integer.value = expected_count;
- }
-
- /* Check the type of each sub-package element */
-
- status =
- acpi_ns_check_package_elements(data,
- (sub_elements + 1),
- package->ret_info.
- object_type1,
- (expected_count - 1),
- 0, 0, 1);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
-
- default: /* Should not get here, type was validated by caller */
-
- return (AE_AML_INTERNAL);
- }
-
- elements++;
- }
-
- return (AE_OK);
-
-package_too_small:
-
- /* The sub-package count was smaller than required */
-
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
- "Return Sub-Package[%u] is too small - found %u elements, expected %u",
- i, sub_package->package.count, expected_count));
-
- return (AE_AML_OPERAND_VALUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_check_package_elements
- *
- * PARAMETERS: data - Pointer to validation data structure
- * elements - Pointer to the package elements array
- * type1 - Object type for first group
- * count1 - Count for first group
- * type2 - Object type for second group
- * count2 - Count for second group
- * start_index - Start of the first group of elements
- *
- * RETURN: Status
- *
- * DESCRIPTION: Check that all elements of a package are of the correct object
- * type. Supports up to two groups of different object types.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ns_check_package_elements(struct acpi_predefined_data *data,
- union acpi_operand_object **elements,
- u8 type1,
- u32 count1,
- u8 type2, u32 count2, u32 start_index)
-{
- union acpi_operand_object **this_element = elements;
- acpi_status status;
- u32 i;
-
- /*
- * Up to two groups of package elements are supported by the data
- * structure. All elements in each group must be of the same type.
- * The second group can have a count of zero.
- */
- for (i = 0; i < count1; i++) {
- status = acpi_ns_check_object_type(data, this_element,
- type1, i + start_index);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- this_element++;
- }
-
- for (i = 0; i < count2; i++) {
- status = acpi_ns_check_object_type(data, this_element,
- type2,
- (i + count1 + start_index));
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- this_element++;
- }
-
- return (AE_OK);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ns_check_object_type
*
* PARAMETERS: data - Pointer to validation data structure
@@ -983,7 +403,7 @@
*
******************************************************************************/
-static acpi_status
+acpi_status
acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index)
diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c
new file mode 100644
index 0000000..a401554
--- /dev/null
+++ b/drivers/acpi/acpica/nsprepkg.c
@@ -0,0 +1,621 @@
+/******************************************************************************
+ *
+ * Module Name: nsprepkg - Validation of package objects for predefined names
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "acpredef.h"
+
+#define _COMPONENT ACPI_NAMESPACE
+ACPI_MODULE_NAME("nsprepkg")
+
+/* Local prototypes */
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count);
+
+static acpi_status
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
+ union acpi_operand_object **elements,
+ u8 type1,
+ u32 count1,
+ u8 type2, u32 count2, u32 start_index);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Check a returned package object for the correct count and
+ * correct type of all sub-objects.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_check_package(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ const union acpi_predefined_info *package;
+ union acpi_operand_object **elements;
+ acpi_status status = AE_OK;
+ u32 expected_count;
+ u32 count;
+ u32 i;
+
+ ACPI_FUNCTION_NAME(ns_check_package);
+
+ /* The package info for this name is in the next table entry */
+
+ package = data->predefined + 1;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
+ "%s Validating return Package of Type %X, Count %X\n",
+ data->pathname, package->ret_info.type,
+ return_object->package.count));
+
+ /*
+ * For variable-length Packages, we can safely remove all embedded
+ * and trailing NULL package elements
+ */
+ acpi_ns_remove_null_elements(data, package->ret_info.type,
+ return_object);
+
+ /* Extract package count and elements array */
+
+ elements = return_object->package.elements;
+ count = return_object->package.count;
+
+ /* The package must have at least one element, else invalid */
+
+ if (!count) {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package has no elements (empty)"));
+
+ return (AE_AML_OPERAND_VALUE);
+ }
+
+ /*
+ * Decode the type of the expected package contents
+ *
+ * PTYPE1 packages contain no subpackages
+ * PTYPE2 packages contain sub-packages
+ */
+ switch (package->ret_info.type) {
+ case ACPI_PTYPE1_FIXED:
+
+ /*
+ * The package count is fixed and there are no sub-packages
+ *
+ * If package is too small, exit.
+ * If package is larger than expected, issue warning but continue
+ */
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (count < expected_count) {
+ goto package_too_small;
+ } else if (count > expected_count) {
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Return Package is larger than needed - "
+ "found %u, expected %u\n",
+ data->pathname, count,
+ expected_count));
+ }
+
+ /* Validate all elements of the returned package */
+
+ status = acpi_ns_check_package_elements(data, elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ package->ret_info.
+ count2, 0);
+ break;
+
+ case ACPI_PTYPE1_VAR:
+
+ /*
+ * The package count is variable, there are no sub-packages, and all
+ * elements must be of the same type
+ */
+ for (i = 0; i < count; i++) {
+ status = acpi_ns_check_object_type(data, elements,
+ package->ret_info.
+ object_type1, i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ elements++;
+ }
+ break;
+
+ case ACPI_PTYPE1_OPTION:
+
+ /*
+ * The package count is variable, there are no sub-packages. There are
+ * a fixed number of required elements, and a variable number of
+ * optional elements.
+ *
+ * Check if package is at least as large as the minimum required
+ */
+ expected_count = package->ret_info3.count;
+ if (count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Variable number of sub-objects */
+
+ for (i = 0; i < count; i++) {
+ if (i < package->ret_info3.count) {
+
+ /* These are the required package elements (0, 1, or 2) */
+
+ status =
+ acpi_ns_check_object_type(data, elements,
+ package->
+ ret_info3.
+ object_type[i],
+ i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ } else {
+ /* These are the optional package elements */
+
+ status =
+ acpi_ns_check_object_type(data, elements,
+ package->
+ ret_info3.
+ tail_object_type,
+ i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ elements++;
+ }
+ break;
+
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* First element is the (Integer) revision */
+
+ status = acpi_ns_check_object_type(data, elements,
+ ACPI_RTYPE_INTEGER, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ elements++;
+ count--;
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ case ACPI_PTYPE2_PKG_COUNT:
+
+ /* First element is the (Integer) count of sub-packages to follow */
+
+ status = acpi_ns_check_object_type(data, elements,
+ ACPI_RTYPE_INTEGER, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Count cannot be larger than the parent package length, but allow it
+ * to be smaller. The >= accounts for the Integer above.
+ */
+ expected_count = (u32)(*elements)->integer.value;
+ if (expected_count >= count) {
+ goto package_too_small;
+ }
+
+ count = expected_count;
+ elements++;
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_FIXED:
+ case ACPI_PTYPE2_MIN:
+ case ACPI_PTYPE2_COUNT:
+ case ACPI_PTYPE2_FIX_VAR:
+
+ /*
+ * These types all return a single Package that consists of a
+ * variable number of sub-Packages.
+ *
+ * First, ensure that the first element is a sub-Package. If not,
+ * the BIOS may have incorrectly returned the object as a single
+ * package instead of a Package of Packages (a common error if
+ * there is only one entry). We may be able to repair this by
+ * wrapping the returned Package with a new outer Package.
+ */
+ if (*elements
+ && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
+
+ /* Create the new outer package and populate it */
+
+ status =
+ acpi_ns_wrap_with_package(data, return_object,
+ return_object_ptr);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Update locals to point to the new package (of 1 element) */
+
+ return_object = *return_object_ptr;
+ elements = return_object->package.elements;
+ count = 1;
+ }
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ default:
+
+ /* Should not get here if predefined info table is correct */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Invalid internal return type in table entry: %X",
+ package->ret_info.type));
+
+ return (AE_AML_INTERNAL);
+ }
+
+ return (status);
+
+ package_too_small:
+
+ /* Error exit for the case with an incorrect package count */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package is too small - found %u elements, expected %u",
+ count, expected_count));
+
+ return (AE_AML_OPERAND_VALUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package_list
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * package - Pointer to package-specific info for method
+ * elements - Element list of parent package. All elements
+ * of this list should be of type Package.
+ * count - Count of subpackages
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Examine a list of subpackages
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count)
+{
+ union acpi_operand_object *sub_package;
+ union acpi_operand_object **sub_elements;
+ acpi_status status;
+ u32 expected_count;
+ u32 i;
+ u32 j;
+
+ /*
+ * Validate each sub-Package in the parent Package
+ *
+ * NOTE: assumes list of sub-packages contains no NULL elements.
+ * Any NULL elements should have been removed by earlier call
+ * to acpi_ns_remove_null_elements.
+ */
+ for (i = 0; i < count; i++) {
+ sub_package = *elements;
+ sub_elements = sub_package->package.elements;
+ data->parent_package = sub_package;
+
+ /* Each sub-object must be of type Package */
+
+ status = acpi_ns_check_object_type(data, &sub_package,
+ ACPI_RTYPE_PACKAGE, i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Examine the different types of expected sub-packages */
+
+ data->parent_package = sub_package;
+ switch (package->ret_info.type) {
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_PKG_COUNT:
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* Each subpackage has a fixed number of elements */
+
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ package->ret_info.
+ count2, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_FIX_VAR:
+ /*
+ * Each subpackage has a fixed number of elements and an
+ * optional element
+ */
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ sub_package->package.
+ count -
+ package->ret_info.
+ count1, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_FIXED:
+
+ /* Each sub-package has a fixed length */
+
+ expected_count = package->ret_info2.count;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Check the type of each sub-package element */
+
+ for (j = 0; j < expected_count; j++) {
+ status =
+ acpi_ns_check_object_type(data,
+ &sub_elements[j],
+ package->
+ ret_info2.
+ object_type[j],
+ j);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ break;
+
+ case ACPI_PTYPE2_MIN:
+
+ /* Each sub-package has a variable but minimum length */
+
+ expected_count = package->ret_info.count1;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Check the type of each sub-package element */
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ sub_package->package.
+ count, 0, 0, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_COUNT:
+
+ /*
+ * First element is the (Integer) count of elements, including
+ * the count field (the ACPI name is num_elements)
+ */
+ status = acpi_ns_check_object_type(data, sub_elements,
+ ACPI_RTYPE_INTEGER,
+ 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Make sure package is large enough for the Count and is
+ * is as large as the minimum size
+ */
+ expected_count = (u32)(*sub_elements)->integer.value;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+ if (sub_package->package.count <
+ package->ret_info.count1) {
+ expected_count = package->ret_info.count1;
+ goto package_too_small;
+ }
+ if (expected_count == 0) {
+ /*
+ * Either the num_entries element was originally zero or it was
+ * a NULL element and repaired to an Integer of value zero.
+ * In either case, repair it by setting num_entries to be the
+ * actual size of the subpackage.
+ */
+ expected_count = sub_package->package.count;
+ (*sub_elements)->integer.value = expected_count;
+ }
+
+ /* Check the type of each sub-package element */
+
+ status =
+ acpi_ns_check_package_elements(data,
+ (sub_elements + 1),
+ package->ret_info.
+ object_type1,
+ (expected_count - 1),
+ 0, 0, 1);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ default: /* Should not get here, type was validated by caller */
+
+ return (AE_AML_INTERNAL);
+ }
+
+ elements++;
+ }
+
+ return (AE_OK);
+
+ package_too_small:
+
+ /* The sub-package count was smaller than required */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Sub-Package[%u] is too small - found %u elements, expected %u",
+ i, sub_package->package.count, expected_count));
+
+ return (AE_AML_OPERAND_VALUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package_elements
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * elements - Pointer to the package elements array
+ * type1 - Object type for first group
+ * count1 - Count for first group
+ * type2 - Object type for second group
+ * count2 - Count for second group
+ * start_index - Start of the first group of elements
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Check that all elements of a package are of the correct object
+ * type. Supports up to two groups of different object types.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
+ union acpi_operand_object **elements,
+ u8 type1,
+ u32 count1,
+ u8 type2, u32 count2, u32 start_index)
+{
+ union acpi_operand_object **this_element = elements;
+ acpi_status status;
+ u32 i;
+
+ /*
+ * Up to two groups of package elements are supported by the data
+ * structure. All elements in each group must be of the same type.
+ * The second group can have a count of zero.
+ */
+ for (i = 0; i < count1; i++) {
+ status = acpi_ns_check_object_type(data, this_element,
+ type1, i + start_index);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ this_element++;
+ }
+
+ for (i = 0; i < count2; i++) {
+ status = acpi_ns_check_object_type(data, this_element,
+ type2,
+ (i + count1 + start_index));
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ this_element++;
+ }
+
+ return (AE_OK);
+}
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index 8c5f292..9e83335 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
index 9018925..ba4d982 100644
--- a/drivers/acpi/acpica/nsrepair2.c
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -55,7 +55,8 @@
*/
typedef
acpi_status(*acpi_repair_function) (struct acpi_predefined_data *data,
- union acpi_operand_object **return_object_ptr);
+ union acpi_operand_object
+ **return_object_ptr);
typedef struct acpi_repair_info {
char name[ACPI_NAME_SIZE];
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 1d2d8ff..5d43efc 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -328,6 +328,11 @@
if ((status == AE_OK) && (flags & ACPI_NS_ERROR_IF_FOUND)) {
status = AE_ALREADY_EXISTS;
}
+#ifdef ACPI_ASL_COMPILER
+ if (*return_node && (*return_node)->type == ACPI_TYPE_ANY) {
+ (*return_node)->flags |= ANOBJ_IS_EXTERNAL;
+ }
+#endif
/* Either found it or there was an error: finished either way */
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index b5b4cb7..686420d 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -46,14 +46,11 @@
#include "accommon.h"
#include "acnamesp.h"
#include "amlcode.h"
-#include "actables.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsutils")
/* Local prototypes */
-static u8 acpi_ns_valid_path_separator(char sep);
-
#ifdef ACPI_OBSOLETE_FUNCTIONS
acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
#endif
@@ -99,42 +96,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ns_valid_root_prefix
- *
- * PARAMETERS: prefix - Character to be checked
- *
- * RETURN: TRUE if a valid prefix
- *
- * DESCRIPTION: Check if a character is a valid ACPI Root prefix
- *
- ******************************************************************************/
-
-u8 acpi_ns_valid_root_prefix(char prefix)
-{
-
- return ((u8) (prefix == '\\'));
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_valid_path_separator
- *
- * PARAMETERS: sep - Character to be checked
- *
- * RETURN: TRUE if a valid path separator
- *
- * DESCRIPTION: Check if a character is a valid ACPI path separator
- *
- ******************************************************************************/
-
-static u8 acpi_ns_valid_path_separator(char sep)
-{
-
- return ((u8) (sep == '.'));
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ns_get_type
*
* PARAMETERS: node - Parent Node to be examined
@@ -151,10 +112,10 @@
if (!node) {
ACPI_WARNING((AE_INFO, "Null Node parameter"));
- return_UINT32(ACPI_TYPE_ANY);
+ return_VALUE(ACPI_TYPE_ANY);
}
- return_UINT32((acpi_object_type) node->type);
+ return_VALUE(node->type);
}
/*******************************************************************************
@@ -179,10 +140,10 @@
/* Type code out of range */
ACPI_WARNING((AE_INFO, "Invalid Object Type 0x%X", type));
- return_UINT32(ACPI_NS_NORMAL);
+ return_VALUE(ACPI_NS_NORMAL);
}
- return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
+ return_VALUE(acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
}
/*******************************************************************************
@@ -218,19 +179,19 @@
*
* strlen() + 1 covers the first name_seg, which has no path separator
*/
- if (acpi_ns_valid_root_prefix(*next_external_char)) {
+ if (ACPI_IS_ROOT_PREFIX(*next_external_char)) {
info->fully_qualified = TRUE;
next_external_char++;
/* Skip redundant root_prefix, like \\_SB.PCI0.SBRG.EC0 */
- while (acpi_ns_valid_root_prefix(*next_external_char)) {
+ while (ACPI_IS_ROOT_PREFIX(*next_external_char)) {
next_external_char++;
}
} else {
/* Handle Carat prefixes */
- while (*next_external_char == '^') {
+ while (ACPI_IS_PARENT_PREFIX(*next_external_char)) {
info->num_carats++;
next_external_char++;
}
@@ -244,7 +205,7 @@
if (*next_external_char) {
info->num_segments = 1;
for (i = 0; next_external_char[i]; i++) {
- if (acpi_ns_valid_path_separator(next_external_char[i])) {
+ if (ACPI_IS_PATH_SEPARATOR(next_external_char[i])) {
info->num_segments++;
}
}
@@ -282,7 +243,7 @@
/* Setup the correct prefixes, counts, and pointers */
if (info->fully_qualified) {
- internal_name[0] = '\\';
+ internal_name[0] = AML_ROOT_PREFIX;
if (num_segments <= 1) {
result = &internal_name[1];
@@ -302,7 +263,7 @@
i = 0;
if (info->num_carats) {
for (i = 0; i < info->num_carats; i++) {
- internal_name[i] = '^';
+ internal_name[i] = AML_PARENT_PREFIX;
}
}
@@ -322,7 +283,7 @@
for (; num_segments; num_segments--) {
for (i = 0; i < ACPI_NAME_SIZE; i++) {
- if (acpi_ns_valid_path_separator(*external_name) ||
+ if (ACPI_IS_PATH_SEPARATOR(*external_name) ||
(*external_name == 0)) {
/* Pad the segment with underscore(s) if segment is short */
@@ -339,7 +300,7 @@
/* Now we must have a path separator, or the pathname is bad */
- if (!acpi_ns_valid_path_separator(*external_name) &&
+ if (!ACPI_IS_PATH_SEPARATOR(*external_name) &&
(*external_name != 0)) {
return_ACPI_STATUS(AE_BAD_PATHNAME);
}
@@ -457,13 +418,13 @@
/* Check for a prefix (one '\' | one or more '^') */
switch (internal_name[0]) {
- case '\\':
+ case AML_ROOT_PREFIX:
prefix_length = 1;
break;
- case '^':
+ case AML_PARENT_PREFIX:
for (i = 0; i < internal_name_length; i++) {
- if (internal_name[i] == '^') {
+ if (ACPI_IS_PARENT_PREFIX(internal_name[i])) {
prefix_length = i + 1;
} else {
break;
@@ -664,17 +625,17 @@
u32 acpi_ns_opens_scope(acpi_object_type type)
{
- ACPI_FUNCTION_TRACE_STR(ns_opens_scope, acpi_ut_get_type_name(type));
+ ACPI_FUNCTION_ENTRY();
- if (!acpi_ut_valid_object_type(type)) {
+ if (type > ACPI_TYPE_LOCAL_MAX) {
/* type code out of range */
ACPI_WARNING((AE_INFO, "Invalid Object Type 0x%X", type));
- return_UINT32(ACPI_NS_NORMAL);
+ return (ACPI_NS_NORMAL);
}
- return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
+ return (((u32)acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
}
/*******************************************************************************
@@ -710,6 +671,8 @@
ACPI_FUNCTION_TRACE_PTR(ns_get_node, ACPI_CAST_PTR(char, pathname));
+ /* Simplest case is a null pathname */
+
if (!pathname) {
*return_node = prefix_node;
if (!prefix_node) {
@@ -718,6 +681,13 @@
return_ACPI_STATUS(AE_OK);
}
+ /* Quick check for a reference to the root */
+
+ if (ACPI_IS_ROOT_PREFIX(pathname[0]) && (!pathname[1])) {
+ *return_node = acpi_gbl_root_node;
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* Convert path to internal representation */
status = acpi_ns_internalize_name(pathname, &internal_path);
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 0483877..e70911a 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -76,12 +76,12 @@
/* It's really the parent's _scope_ that we want */
- return parent_node->child;
+ return (parent_node->child);
}
/* Otherwise just return the next peer */
- return child_node->peer;
+ return (child_node->peer);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index d6a9f77..fc69949 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -236,7 +236,7 @@
* 2) No handle, not fully qualified pathname (error)
* 3) Valid handle
*/
- if ((pathname) && (acpi_ns_valid_root_prefix(pathname[0]))) {
+ if ((pathname) && (ACPI_IS_ROOT_PREFIX(pathname[0]))) {
/* The path is fully qualified, just evaluate by name */
@@ -492,7 +492,7 @@
*/
status = acpi_ut_acquire_read_lock(&acpi_gbl_namespace_rw_lock);
if (ACPI_FAILURE(status)) {
- return status;
+ return_ACPI_STATUS(status);
}
/*
@@ -550,7 +550,7 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ return (status);
}
node = acpi_ns_validate_handle(obj_handle);
@@ -602,17 +602,22 @@
/* Walk the CID list */
- found = 0;
+ found = FALSE;
for (i = 0; i < cid->count; i++) {
if (ACPI_STRCMP(cid->ids[i].string, info->hid)
== 0) {
- found = 1;
+
+ /* Found a matching CID */
+
+ found = TRUE;
break;
}
}
+
ACPI_FREE(cid);
- if (!found)
+ if (!found) {
return (AE_OK);
+ }
}
}
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 811c6f1..f3a4d95 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -107,7 +107,7 @@
*
* Error for <null Parent + relative path>
*/
- if (acpi_ns_valid_root_prefix(pathname[0])) {
+ if (ACPI_IS_ROOT_PREFIX(pathname[0])) {
/* Pathname is fully qualified (starts with '\') */
@@ -290,7 +290,7 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ return (status);
}
node = acpi_ns_validate_handle(handle);
@@ -539,14 +539,14 @@
/* Parameter validation */
if (!buffer) {
- return AE_BAD_PARAMETER;
+ return (AE_BAD_PARAMETER);
}
/* Table must be a DSDT or SSDT */
if (!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) &&
!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
- return AE_BAD_HEADER;
+ return (AE_BAD_HEADER);
}
/* First AML opcode in the table must be a control method */
@@ -554,7 +554,7 @@
parser_state.aml = buffer + sizeof(struct acpi_table_header);
opcode = acpi_ps_peek_opcode(&parser_state);
if (opcode != AML_METHOD_OP) {
- return AE_BAD_PARAMETER;
+ return (AE_BAD_PARAMETER);
}
/* Extract method information from the raw AML */
@@ -572,13 +572,13 @@
*/
aml_buffer = ACPI_ALLOCATE(aml_length);
if (!aml_buffer) {
- return AE_NO_MEMORY;
+ return (AE_NO_MEMORY);
}
method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
if (!method_obj) {
ACPI_FREE(aml_buffer);
- return AE_NO_MEMORY;
+ return (AE_NO_MEMORY);
}
/* Lock namespace for acpi_ns_lookup, we may be creating a new node */
@@ -644,12 +644,12 @@
/* Remove local reference to the method object */
acpi_ut_remove_reference(method_obj);
- return status;
+ return (status);
error_exit:
ACPI_FREE(aml_buffer);
ACPI_FREE(method_obj);
- return status;
+ return (status);
}
ACPI_EXPORT_SYMBOL(acpi_install_method)
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 9d029da..c0853ef 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index cb79e2d..f51308c 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -108,7 +108,7 @@
/* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
package_length |= (aml[0] & byte_zero_mask);
- return_UINT32(package_length);
+ return_VALUE(package_length);
}
/*******************************************************************************
@@ -162,7 +162,7 @@
/* Point past any namestring prefix characters (backslash or carat) */
- while (acpi_ps_is_prefix_char(*end)) {
+ while (ACPI_IS_ROOT_PREFIX(*end) || ACPI_IS_PARENT_PREFIX(*end)) {
end++;
}
@@ -798,7 +798,8 @@
subop = acpi_ps_peek_opcode(parser_state);
if (subop == 0 ||
acpi_ps_is_leading_char(subop) ||
- acpi_ps_is_prefix_char(subop)) {
+ ACPI_IS_ROOT_PREFIX(subop) ||
+ ACPI_IS_PARENT_PREFIX(subop)) {
/* null_name or name_string */
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 5607805..63c4554 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -58,352 +58,17 @@
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psloop")
-static u32 acpi_gbl_depth = 0;
-
/* Local prototypes */
-
-static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
-
-static acpi_status
-acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
- u8 * aml_op_start,
- union acpi_parse_object *unnamed_op,
- union acpi_parse_object **op);
-
-static acpi_status
-acpi_ps_create_op(struct acpi_walk_state *walk_state,
- u8 * aml_op_start, union acpi_parse_object **new_op);
-
static acpi_status
acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object *op);
-static acpi_status
-acpi_ps_complete_op(struct acpi_walk_state *walk_state,
- union acpi_parse_object **op, acpi_status status);
-
-static acpi_status
-acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
- union acpi_parse_object *op, acpi_status status);
-
static void
acpi_ps_link_module_code(union acpi_parse_object *parent_op,
u8 *aml_start, u32 aml_length, acpi_owner_id owner_id);
/*******************************************************************************
*
- * FUNCTION: acpi_ps_get_aml_opcode
- *
- * PARAMETERS: walk_state - Current state
- *
- * RETURN: Status
- *
- * DESCRIPTION: Extract the next AML opcode from the input stream.
- *
- ******************************************************************************/
-
-static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
-{
-
- ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
-
- walk_state->aml_offset =
- (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
- walk_state->parser_state.aml_start);
- walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
-
- /*
- * First cut to determine what we have found:
- * 1) A valid AML opcode
- * 2) A name string
- * 3) An unknown/invalid opcode
- */
- walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
-
- switch (walk_state->op_info->class) {
- case AML_CLASS_ASCII:
- case AML_CLASS_PREFIX:
- /*
- * Starts with a valid prefix or ASCII char, this is a name
- * string. Convert the bare name string to a namepath.
- */
- walk_state->opcode = AML_INT_NAMEPATH_OP;
- walk_state->arg_types = ARGP_NAMESTRING;
- break;
-
- case AML_CLASS_UNKNOWN:
-
- /* The opcode is unrecognized. Complain and skip unknown opcodes */
-
- if (walk_state->pass_number == 2) {
- ACPI_ERROR((AE_INFO,
- "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
- walk_state->opcode,
- (u32)(walk_state->aml_offset +
- sizeof(struct acpi_table_header))));
-
- ACPI_DUMP_BUFFER(walk_state->parser_state.aml - 16, 48);
-
-#ifdef ACPI_ASL_COMPILER
- /*
- * This is executed for the disassembler only. Output goes
- * to the disassembled ASL output file.
- */
- acpi_os_printf
- ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
- walk_state->opcode,
- (u32)(walk_state->aml_offset +
- sizeof(struct acpi_table_header)));
-
- /* Dump the context surrounding the invalid opcode */
-
- acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
- aml - 16), 48, DB_BYTE_DISPLAY,
- walk_state->aml_offset +
- sizeof(struct acpi_table_header) -
- 16);
- acpi_os_printf(" */\n");
-#endif
- }
-
- /* Increment past one-byte or two-byte opcode */
-
- walk_state->parser_state.aml++;
- if (walk_state->opcode > 0xFF) { /* Can only happen if first byte is 0x5B */
- walk_state->parser_state.aml++;
- }
-
- return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
-
- default:
-
- /* Found opcode info, this is a normal opcode */
-
- walk_state->parser_state.aml +=
- acpi_ps_get_opcode_size(walk_state->opcode);
- walk_state->arg_types = walk_state->op_info->parse_args;
- break;
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_build_named_op
- *
- * PARAMETERS: walk_state - Current state
- * aml_op_start - Begin of named Op in AML
- * unnamed_op - Early Op (not a named Op)
- * op - Returned Op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Parse a named Op
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
- u8 * aml_op_start,
- union acpi_parse_object *unnamed_op,
- union acpi_parse_object **op)
-{
- acpi_status status = AE_OK;
- union acpi_parse_object *arg = NULL;
-
- ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
-
- unnamed_op->common.value.arg = NULL;
- unnamed_op->common.arg_list_length = 0;
- unnamed_op->common.aml_opcode = walk_state->opcode;
-
- /*
- * Get and append arguments until we find the node that contains
- * the name (the type ARGP_NAME).
- */
- while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
- (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
- status =
- acpi_ps_get_next_arg(walk_state,
- &(walk_state->parser_state),
- GET_CURRENT_ARG_TYPE(walk_state->
- arg_types), &arg);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- acpi_ps_append_arg(unnamed_op, arg);
- INCREMENT_ARG_LIST(walk_state->arg_types);
- }
-
- /*
- * Make sure that we found a NAME and didn't run out of arguments
- */
- if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
- return_ACPI_STATUS(AE_AML_NO_OPERAND);
- }
-
- /* We know that this arg is a name, move to next arg */
-
- INCREMENT_ARG_LIST(walk_state->arg_types);
-
- /*
- * Find the object. This will either insert the object into
- * the namespace or simply look it up
- */
- walk_state->op = NULL;
-
- status = walk_state->descending_callback(walk_state, op);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
- return_ACPI_STATUS(status);
- }
-
- if (!*op) {
- return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
- }
-
- status = acpi_ps_next_parse_state(walk_state, *op, status);
- if (ACPI_FAILURE(status)) {
- if (status == AE_CTRL_PENDING) {
- return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
- }
- return_ACPI_STATUS(status);
- }
-
- acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
- acpi_gbl_depth++;
-
- if ((*op)->common.aml_opcode == AML_REGION_OP ||
- (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
- /*
- * Defer final parsing of an operation_region body, because we don't
- * have enough info in the first pass to parse it correctly (i.e.,
- * there may be method calls within the term_arg elements of the body.)
- *
- * However, we must continue parsing because the opregion is not a
- * standalone package -- we don't know where the end is at this point.
- *
- * (Length is unknown until parse of the body complete)
- */
- (*op)->named.data = aml_op_start;
- (*op)->named.length = 0;
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_create_op
- *
- * PARAMETERS: walk_state - Current state
- * aml_op_start - Op start in AML
- * new_op - Returned Op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Get Op from AML
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ps_create_op(struct acpi_walk_state *walk_state,
- u8 * aml_op_start, union acpi_parse_object **new_op)
-{
- acpi_status status = AE_OK;
- union acpi_parse_object *op;
- union acpi_parse_object *named_op = NULL;
- union acpi_parse_object *parent_scope;
- u8 argument_count;
- const struct acpi_opcode_info *op_info;
-
- ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
-
- status = acpi_ps_get_aml_opcode(walk_state);
- if (status == AE_CTRL_PARSE_CONTINUE) {
- return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
- }
-
- /* Create Op structure and append to parent's argument list */
-
- walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
- op = acpi_ps_alloc_op(walk_state->opcode);
- if (!op) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- if (walk_state->op_info->flags & AML_NAMED) {
- status =
- acpi_ps_build_named_op(walk_state, aml_op_start, op,
- &named_op);
- acpi_ps_free_op(op);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- *new_op = named_op;
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Not a named opcode, just allocate Op and append to parent */
-
- if (walk_state->op_info->flags & AML_CREATE) {
- /*
- * Backup to beginning of create_XXXfield declaration
- * body_length is unknown until we parse the body
- */
- op->named.data = aml_op_start;
- op->named.length = 0;
- }
-
- if (walk_state->opcode == AML_BANK_FIELD_OP) {
- /*
- * Backup to beginning of bank_field declaration
- * body_length is unknown until we parse the body
- */
- op->named.data = aml_op_start;
- op->named.length = 0;
- }
-
- parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
- acpi_ps_append_arg(parent_scope, op);
-
- if (parent_scope) {
- op_info =
- acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
- if (op_info->flags & AML_HAS_TARGET) {
- argument_count =
- acpi_ps_get_argument_count(op_info->type);
- if (parent_scope->common.arg_list_length >
- argument_count) {
- op->common.flags |= ACPI_PARSEOP_TARGET;
- }
- } else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
- op->common.flags |= ACPI_PARSEOP_TARGET;
- }
- }
-
- if (walk_state->descending_callback != NULL) {
- /*
- * Find the object. This will either insert the object into
- * the namespace or simply look it up
- */
- walk_state->op = *new_op = op;
-
- status = walk_state->descending_callback(walk_state, &op);
- status = acpi_ps_next_parse_state(walk_state, op, status);
- if (status == AE_CTRL_PENDING) {
- status = AE_CTRL_PARSE_PENDING;
- }
- }
-
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ps_get_arguments
*
* PARAMETERS: walk_state - Current state
@@ -711,288 +376,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ps_complete_op
- *
- * PARAMETERS: walk_state - Current state
- * op - Returned Op
- * status - Parse status before complete Op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Complete Op
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ps_complete_op(struct acpi_walk_state *walk_state,
- union acpi_parse_object **op, acpi_status status)
-{
- acpi_status status2;
-
- ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
-
- /*
- * Finished one argument of the containing scope
- */
- walk_state->parser_state.scope->parse_scope.arg_count--;
-
- /* Close this Op (will result in parse subtree deletion) */
-
- status2 = acpi_ps_complete_this_op(walk_state, *op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
-
- *op = NULL;
-
- switch (status) {
- case AE_OK:
- break;
-
- case AE_CTRL_TRANSFER:
-
- /* We are about to transfer to a called method */
-
- walk_state->prev_op = NULL;
- walk_state->prev_arg_types = walk_state->arg_types;
- return_ACPI_STATUS(status);
-
- case AE_CTRL_END:
-
- acpi_ps_pop_scope(&(walk_state->parser_state), op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- if (*op) {
- walk_state->op = *op;
- walk_state->op_info =
- acpi_ps_get_opcode_info((*op)->common.aml_opcode);
- walk_state->opcode = (*op)->common.aml_opcode;
-
- status = walk_state->ascending_callback(walk_state);
- status =
- acpi_ps_next_parse_state(walk_state, *op, status);
-
- status2 = acpi_ps_complete_this_op(walk_state, *op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
-
- status = AE_OK;
- break;
-
- case AE_CTRL_BREAK:
- case AE_CTRL_CONTINUE:
-
- /* Pop off scopes until we find the While */
-
- while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
- acpi_ps_pop_scope(&(walk_state->parser_state), op,
- &walk_state->arg_types,
- &walk_state->arg_count);
- }
-
- /* Close this iteration of the While loop */
-
- walk_state->op = *op;
- walk_state->op_info =
- acpi_ps_get_opcode_info((*op)->common.aml_opcode);
- walk_state->opcode = (*op)->common.aml_opcode;
-
- status = walk_state->ascending_callback(walk_state);
- status = acpi_ps_next_parse_state(walk_state, *op, status);
-
- status2 = acpi_ps_complete_this_op(walk_state, *op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
-
- status = AE_OK;
- break;
-
- case AE_CTRL_TERMINATE:
-
- /* Clean up */
- do {
- if (*op) {
- status2 =
- acpi_ps_complete_this_op(walk_state, *op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
-
- acpi_ut_delete_generic_state
- (acpi_ut_pop_generic_state
- (&walk_state->control_state));
- }
-
- acpi_ps_pop_scope(&(walk_state->parser_state), op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (*op);
-
- return_ACPI_STATUS(AE_OK);
-
- default: /* All other non-AE_OK status */
-
- do {
- if (*op) {
- status2 =
- acpi_ps_complete_this_op(walk_state, *op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
-
- acpi_ps_pop_scope(&(walk_state->parser_state), op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (*op);
-
-#if 0
- /*
- * TBD: Cleanup parse ops on error
- */
- if (*op == NULL) {
- acpi_ps_pop_scope(parser_state, op,
- &walk_state->arg_types,
- &walk_state->arg_count);
- }
-#endif
- walk_state->prev_op = NULL;
- walk_state->prev_arg_types = walk_state->arg_types;
- return_ACPI_STATUS(status);
- }
-
- /* This scope complete? */
-
- if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
- acpi_ps_pop_scope(&(walk_state->parser_state), op,
- &walk_state->arg_types,
- &walk_state->arg_count);
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
- } else {
- *op = NULL;
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_complete_final_op
- *
- * PARAMETERS: walk_state - Current state
- * op - Current Op
- * status - Current parse status before complete last
- * Op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Complete last Op.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
- union acpi_parse_object *op, acpi_status status)
-{
- acpi_status status2;
-
- ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
-
- /*
- * Complete the last Op (if not completed), and clear the scope stack.
- * It is easily possible to end an AML "package" with an unbounded number
- * of open scopes (such as when several ASL blocks are closed with
- * sequential closing braces). We want to terminate each one cleanly.
- */
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
- op));
- do {
- if (op) {
- if (walk_state->ascending_callback != NULL) {
- walk_state->op = op;
- walk_state->op_info =
- acpi_ps_get_opcode_info(op->common.
- aml_opcode);
- walk_state->opcode = op->common.aml_opcode;
-
- status =
- walk_state->ascending_callback(walk_state);
- status =
- acpi_ps_next_parse_state(walk_state, op,
- status);
- if (status == AE_CTRL_PENDING) {
- status =
- acpi_ps_complete_op(walk_state, &op,
- AE_OK);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- if (status == AE_CTRL_TERMINATE) {
- status = AE_OK;
-
- /* Clean up */
- do {
- if (op) {
- status2 =
- acpi_ps_complete_this_op
- (walk_state, op);
- if (ACPI_FAILURE
- (status2)) {
- return_ACPI_STATUS
- (status2);
- }
- }
-
- acpi_ps_pop_scope(&
- (walk_state->
- parser_state),
- &op,
- &walk_state->
- arg_types,
- &walk_state->
- arg_count);
-
- } while (op);
-
- return_ACPI_STATUS(status);
- }
-
- else if (ACPI_FAILURE(status)) {
-
- /* First error is most important */
-
- (void)
- acpi_ps_complete_this_op(walk_state,
- op);
- return_ACPI_STATUS(status);
- }
- }
-
- status2 = acpi_ps_complete_this_op(walk_state, op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
-
- acpi_ps_pop_scope(&(walk_state->parser_state), &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (op);
-
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ps_parse_loop
*
* PARAMETERS: walk_state - Current state
@@ -1177,10 +560,6 @@
walk_state->op_info =
acpi_ps_get_opcode_info(op->common.aml_opcode);
if (walk_state->op_info->flags & AML_NAMED) {
- if (acpi_gbl_depth) {
- acpi_gbl_depth--;
- }
-
if (op->common.aml_opcode == AML_REGION_OP ||
op->common.aml_opcode == AML_DATA_REGION_OP) {
/*
diff --git a/drivers/acpi/acpica/psobject.c b/drivers/acpi/acpica/psobject.c
new file mode 100644
index 0000000..12c4028
--- /dev/null
+++ b/drivers/acpi/acpica/psobject.c
@@ -0,0 +1,647 @@
+/******************************************************************************
+ *
+ * Module Name: psobject - Support for parse objects
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+
+#define _COMPONENT ACPI_PARSER
+ACPI_MODULE_NAME("psobject")
+
+/* Local prototypes */
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_aml_opcode
+ *
+ * PARAMETERS: walk_state - Current state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Extract the next AML opcode from the input stream.
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
+{
+
+ ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
+
+ walk_state->aml_offset =
+ (u32)ACPI_PTR_DIFF(walk_state->parser_state.aml,
+ walk_state->parser_state.aml_start);
+ walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
+
+ /*
+ * First cut to determine what we have found:
+ * 1) A valid AML opcode
+ * 2) A name string
+ * 3) An unknown/invalid opcode
+ */
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+
+ switch (walk_state->op_info->class) {
+ case AML_CLASS_ASCII:
+ case AML_CLASS_PREFIX:
+ /*
+ * Starts with a valid prefix or ASCII char, this is a name
+ * string. Convert the bare name string to a namepath.
+ */
+ walk_state->opcode = AML_INT_NAMEPATH_OP;
+ walk_state->arg_types = ARGP_NAMESTRING;
+ break;
+
+ case AML_CLASS_UNKNOWN:
+
+ /* The opcode is unrecognized. Complain and skip unknown opcodes */
+
+ if (walk_state->pass_number == 2) {
+ ACPI_ERROR((AE_INFO,
+ "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header))));
+
+ ACPI_DUMP_BUFFER((walk_state->parser_state.aml - 16),
+ 48);
+
+#ifdef ACPI_ASL_COMPILER
+ /*
+ * This is executed for the disassembler only. Output goes
+ * to the disassembled ASL output file.
+ */
+ acpi_os_printf
+ ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header)));
+
+ /* Dump the context surrounding the invalid opcode */
+
+ acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+ aml - 16), 48, DB_BYTE_DISPLAY,
+ (walk_state->aml_offset +
+ sizeof(struct acpi_table_header) -
+ 16));
+ acpi_os_printf(" */\n");
+#endif
+ }
+
+ /* Increment past one-byte or two-byte opcode */
+
+ walk_state->parser_state.aml++;
+ if (walk_state->opcode > 0xFF) { /* Can only happen if first byte is 0x5B */
+ walk_state->parser_state.aml++;
+ }
+
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+
+ default:
+
+ /* Found opcode info, this is a normal opcode */
+
+ walk_state->parser_state.aml +=
+ acpi_ps_get_opcode_size(walk_state->opcode);
+ walk_state->arg_types = walk_state->op_info->parse_args;
+ break;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_build_named_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Begin of named Op in AML
+ * unnamed_op - Early Op (not a named Op)
+ * op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Parse a named Op
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start,
+ union acpi_parse_object *unnamed_op,
+ union acpi_parse_object **op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *arg = NULL;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
+
+ unnamed_op->common.value.arg = NULL;
+ unnamed_op->common.arg_list_length = 0;
+ unnamed_op->common.aml_opcode = walk_state->opcode;
+
+ /*
+ * Get and append arguments until we find the node that contains
+ * the name (the type ARGP_NAME).
+ */
+ while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
+ (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
+ status =
+ acpi_ps_get_next_arg(walk_state,
+ &(walk_state->parser_state),
+ GET_CURRENT_ARG_TYPE(walk_state->
+ arg_types), &arg);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(unnamed_op, arg);
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+ }
+
+ /*
+ * Make sure that we found a NAME and didn't run out of arguments
+ */
+ if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+
+ /* We know that this arg is a name, move to next arg */
+
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = NULL;
+
+ status = walk_state->descending_callback(walk_state, op);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
+ return_ACPI_STATUS(status);
+ }
+
+ if (!*op) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_CTRL_PENDING) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
+
+ if ((*op)->common.aml_opcode == AML_REGION_OP ||
+ (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
+ /*
+ * Defer final parsing of an operation_region body, because we don't
+ * have enough info in the first pass to parse it correctly (i.e.,
+ * there may be method calls within the term_arg elements of the body.)
+ *
+ * However, we must continue parsing because the opregion is not a
+ * standalone package -- we don't know where the end is at this point.
+ *
+ * (Length is unknown until parse of the body complete)
+ */
+ (*op)->named.data = aml_op_start;
+ (*op)->named.length = 0;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_create_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Op start in AML
+ * new_op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Get Op from AML
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start, union acpi_parse_object **new_op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *op;
+ union acpi_parse_object *named_op = NULL;
+ union acpi_parse_object *parent_scope;
+ u8 argument_count;
+ const struct acpi_opcode_info *op_info;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
+
+ status = acpi_ps_get_aml_opcode(walk_state);
+ if (status == AE_CTRL_PARSE_CONTINUE) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+
+ /* Create Op structure and append to parent's argument list */
+
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+ op = acpi_ps_alloc_op(walk_state->opcode);
+ if (!op) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ if (walk_state->op_info->flags & AML_NAMED) {
+ status =
+ acpi_ps_build_named_op(walk_state, aml_op_start, op,
+ &named_op);
+ acpi_ps_free_op(op);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ *new_op = named_op;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Not a named opcode, just allocate Op and append to parent */
+
+ if (walk_state->op_info->flags & AML_CREATE) {
+ /*
+ * Backup to beginning of create_XXXfield declaration
+ * body_length is unknown until we parse the body
+ */
+ op->named.data = aml_op_start;
+ op->named.length = 0;
+ }
+
+ if (walk_state->opcode == AML_BANK_FIELD_OP) {
+ /*
+ * Backup to beginning of bank_field declaration
+ * body_length is unknown until we parse the body
+ */
+ op->named.data = aml_op_start;
+ op->named.length = 0;
+ }
+
+ parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
+ acpi_ps_append_arg(parent_scope, op);
+
+ if (parent_scope) {
+ op_info =
+ acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
+ if (op_info->flags & AML_HAS_TARGET) {
+ argument_count =
+ acpi_ps_get_argument_count(op_info->type);
+ if (parent_scope->common.arg_list_length >
+ argument_count) {
+ op->common.flags |= ACPI_PARSEOP_TARGET;
+ }
+ } else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
+ op->common.flags |= ACPI_PARSEOP_TARGET;
+ }
+ }
+
+ if (walk_state->descending_callback != NULL) {
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = *new_op = op;
+
+ status = walk_state->descending_callback(walk_state, &op);
+ status = acpi_ps_next_parse_state(walk_state, op, status);
+ if (status == AE_CTRL_PENDING) {
+ status = AE_CTRL_PARSE_PENDING;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * op - Returned Op
+ * status - Parse status before complete Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete Op
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
+
+ /*
+ * Finished one argument of the containing scope
+ */
+ walk_state->parser_state.scope->parse_scope.arg_count--;
+
+ /* Close this Op (will result in parse subtree deletion) */
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ *op = NULL;
+
+ switch (status) {
+ case AE_OK:
+ break;
+
+ case AE_CTRL_TRANSFER:
+
+ /* We are about to transfer to a called method */
+
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+ return_ACPI_STATUS(status);
+
+ case AE_CTRL_END:
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ if (*op) {
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_BREAK:
+ case AE_CTRL_CONTINUE:
+
+ /* Pop off scopes until we find the While */
+
+ while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ }
+
+ /* Close this iteration of the While loop */
+
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_TERMINATE:
+
+ /* Clean up */
+ do {
+ if (*op) {
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ acpi_ut_delete_generic_state
+ (acpi_ut_pop_generic_state
+ (&walk_state->control_state));
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+ return_ACPI_STATUS(AE_OK);
+
+ default: /* All other non-AE_OK status */
+
+ do {
+ if (*op) {
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+#if 0
+ /*
+ * TBD: Cleanup parse ops on error
+ */
+ if (*op == NULL) {
+ acpi_ps_pop_scope(parser_state, op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ }
+#endif
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+ return_ACPI_STATUS(status);
+ }
+
+ /* This scope complete? */
+
+ if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
+ } else {
+ *op = NULL;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_final_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * op - Current Op
+ * status - Current parse status before complete last
+ * Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete last Op.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
+
+ /*
+ * Complete the last Op (if not completed), and clear the scope stack.
+ * It is easily possible to end an AML "package" with an unbounded number
+ * of open scopes (such as when several ASL blocks are closed with
+ * sequential closing braces). We want to terminate each one cleanly.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
+ op));
+ do {
+ if (op) {
+ if (walk_state->ascending_callback != NULL) {
+ walk_state->op = op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info(op->common.
+ aml_opcode);
+ walk_state->opcode = op->common.aml_opcode;
+
+ status =
+ walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, op,
+ status);
+ if (status == AE_CTRL_PENDING) {
+ status =
+ acpi_ps_complete_op(walk_state, &op,
+ AE_OK);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ if (status == AE_CTRL_TERMINATE) {
+ status = AE_OK;
+
+ /* Clean up */
+ do {
+ if (op) {
+ status2 =
+ acpi_ps_complete_this_op
+ (walk_state, op);
+ if (ACPI_FAILURE
+ (status2)) {
+ return_ACPI_STATUS
+ (status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&
+ (walk_state->
+ parser_state),
+ &op,
+ &walk_state->
+ arg_types,
+ &walk_state->
+ arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+ }
+
+ else if (ACPI_FAILURE(status)) {
+
+ /* First error is most important */
+
+ (void)
+ acpi_ps_complete_this_op(walk_state,
+ op);
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ status2 = acpi_ps_complete_this_op(walk_state, op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), &op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+}
diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c
index 1793d93..1b659e59 100644
--- a/drivers/acpi/acpica/psopcode.c
+++ b/drivers/acpi/acpica/psopcode.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -43,16 +43,12 @@
#include <acpi/acpi.h>
#include "accommon.h"
-#include "acparser.h"
#include "acopcode.h"
#include "amlcode.h"
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psopcode")
-static const u8 acpi_gbl_argument_count[] =
- { 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 6 };
-
/*******************************************************************************
*
* NAME: acpi_gbl_aml_op_info
@@ -63,7 +59,6 @@
* the operand type.
*
******************************************************************************/
-
/*
* Summary of opcode types/flags
*
@@ -181,7 +176,6 @@
AML_CREATE_QWORD_FIELD_OP
******************************************************************************/
-
/*
* Master Opcode information table. A summary of everything we know about each
* opcode, all in one place.
@@ -656,169 +650,3 @@
/*! [End] no source code translation !*/
};
-
-/*
- * This table is directly indexed by the opcodes, and returns an
- * index into the table above
- */
-static const u8 acpi_gbl_short_op_index[256] = {
-/* 0 1 2 3 4 5 6 7 */
-/* 8 9 A B C D E F */
-/* 0x00 */ 0x00, 0x01, _UNK, _UNK, _UNK, _UNK, 0x02, _UNK,
-/* 0x08 */ 0x03, _UNK, 0x04, 0x05, 0x06, 0x07, 0x6E, _UNK,
-/* 0x10 */ 0x08, 0x09, 0x0a, 0x6F, 0x0b, _UNK, _UNK, _UNK,
-/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x20 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x28 */ _UNK, _UNK, _UNK, _UNK, _UNK, 0x63, _PFX, _PFX,
-/* 0x30 */ 0x67, 0x66, 0x68, 0x65, 0x69, 0x64, 0x6A, 0x7D,
-/* 0x38 */ 0x7F, 0x80, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x40 */ _UNK, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
-/* 0x48 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
-/* 0x50 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
-/* 0x58 */ _ASC, _ASC, _ASC, _UNK, _PFX, _UNK, _PFX, _ASC,
-/* 0x60 */ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
-/* 0x68 */ 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, _UNK,
-/* 0x70 */ 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22,
-/* 0x78 */ 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
-/* 0x80 */ 0x2b, 0x2c, 0x2d, 0x2e, 0x70, 0x71, 0x2f, 0x30,
-/* 0x88 */ 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x72,
-/* 0x90 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x73, 0x74,
-/* 0x98 */ 0x75, 0x76, _UNK, _UNK, 0x77, 0x78, 0x79, 0x7A,
-/* 0xA0 */ 0x3e, 0x3f, 0x40, 0x41, 0x42, 0x43, 0x60, 0x61,
-/* 0xA8 */ 0x62, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xB0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xB8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xC0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xC8 */ _UNK, _UNK, _UNK, _UNK, 0x44, _UNK, _UNK, _UNK,
-/* 0xD0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xD8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xE0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xE8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xF0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0xF8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x45,
-};
-
-/*
- * This table is indexed by the second opcode of the extended opcode
- * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
- */
-static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
-/* 0 1 2 3 4 5 6 7 */
-/* 8 9 A B C D E F */
-/* 0x00 */ _UNK, 0x46, 0x47, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x08 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x10 */ _UNK, _UNK, 0x48, 0x49, _UNK, _UNK, _UNK, _UNK,
-/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x7B,
-/* 0x20 */ 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, 0x51,
-/* 0x28 */ 0x52, 0x53, 0x54, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x30 */ 0x55, 0x56, 0x57, 0x7e, _UNK, _UNK, _UNK, _UNK,
-/* 0x38 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x40 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x48 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x50 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x58 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x60 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x68 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x70 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x78 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
-/* 0x80 */ 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
-/* 0x88 */ 0x7C,
-};
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_get_opcode_info
- *
- * PARAMETERS: opcode - The AML opcode
- *
- * RETURN: A pointer to the info about the opcode.
- *
- * DESCRIPTION: Find AML opcode description based on the opcode.
- * NOTE: This procedure must ALWAYS return a valid pointer!
- *
- ******************************************************************************/
-
-const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
-{
- ACPI_FUNCTION_NAME(ps_get_opcode_info);
-
- /*
- * Detect normal 8-bit opcode or extended 16-bit opcode
- */
- if (!(opcode & 0xFF00)) {
-
- /* Simple (8-bit) opcode: 0-255, can't index beyond table */
-
- return (&acpi_gbl_aml_op_info
- [acpi_gbl_short_op_index[(u8) opcode]]);
- }
-
- if (((opcode & 0xFF00) == AML_EXTENDED_OPCODE) &&
- (((u8) opcode) <= MAX_EXTENDED_OPCODE)) {
-
- /* Valid extended (16-bit) opcode */
-
- return (&acpi_gbl_aml_op_info
- [acpi_gbl_long_op_index[(u8) opcode]]);
- }
-
- /* Unknown AML opcode */
-
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "Unknown AML opcode [%4.4X]\n", opcode));
-
- return (&acpi_gbl_aml_op_info[_UNK]);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_get_opcode_name
- *
- * PARAMETERS: opcode - The AML opcode
- *
- * RETURN: A pointer to the name of the opcode (ASCII String)
- * Note: Never returns NULL.
- *
- * DESCRIPTION: Translate an opcode into a human-readable string
- *
- ******************************************************************************/
-
-char *acpi_ps_get_opcode_name(u16 opcode)
-{
-#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
-
- const struct acpi_opcode_info *op;
-
- op = acpi_ps_get_opcode_info(opcode);
-
- /* Always guaranteed to return a valid pointer */
-
- return (op->name);
-
-#else
- return ("OpcodeName unavailable");
-
-#endif
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_get_argument_count
- *
- * PARAMETERS: op_type - Type associated with the AML opcode
- *
- * RETURN: Argument count
- *
- * DESCRIPTION: Obtain the number of expected arguments for an AML opcode
- *
- ******************************************************************************/
-
-u8 acpi_ps_get_argument_count(u32 op_type)
-{
-
- if (op_type <= AML_TYPE_EXEC_6A_0T_1R) {
- return (acpi_gbl_argument_count[op_type]);
- }
-
- return (0);
-}
diff --git a/drivers/acpi/acpica/psopinfo.c b/drivers/acpi/acpica/psopinfo.c
new file mode 100644
index 0000000..9ba5301
--- /dev/null
+++ b/drivers/acpi/acpica/psopinfo.c
@@ -0,0 +1,223 @@
+/******************************************************************************
+ *
+ * Module Name: psopinfo - AML opcode information functions and dispatch tables
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "acopcode.h"
+#include "amlcode.h"
+
+#define _COMPONENT ACPI_PARSER
+ACPI_MODULE_NAME("psopinfo")
+
+extern const u8 acpi_gbl_short_op_index[];
+extern const u8 acpi_gbl_long_op_index[];
+
+static const u8 acpi_gbl_argument_count[] =
+ { 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 6 };
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_opcode_info
+ *
+ * PARAMETERS: opcode - The AML opcode
+ *
+ * RETURN: A pointer to the info about the opcode.
+ *
+ * DESCRIPTION: Find AML opcode description based on the opcode.
+ * NOTE: This procedure must ALWAYS return a valid pointer!
+ *
+ ******************************************************************************/
+
+const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
+{
+ ACPI_FUNCTION_NAME(ps_get_opcode_info);
+
+ /*
+ * Detect normal 8-bit opcode or extended 16-bit opcode
+ */
+ if (!(opcode & 0xFF00)) {
+
+ /* Simple (8-bit) opcode: 0-255, can't index beyond table */
+
+ return (&acpi_gbl_aml_op_info
+ [acpi_gbl_short_op_index[(u8)opcode]]);
+ }
+
+ if (((opcode & 0xFF00) == AML_EXTENDED_OPCODE) &&
+ (((u8)opcode) <= MAX_EXTENDED_OPCODE)) {
+
+ /* Valid extended (16-bit) opcode */
+
+ return (&acpi_gbl_aml_op_info
+ [acpi_gbl_long_op_index[(u8)opcode]]);
+ }
+
+ /* Unknown AML opcode */
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Unknown AML opcode [%4.4X]\n", opcode));
+
+ return (&acpi_gbl_aml_op_info[_UNK]);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_opcode_name
+ *
+ * PARAMETERS: opcode - The AML opcode
+ *
+ * RETURN: A pointer to the name of the opcode (ASCII String)
+ * Note: Never returns NULL.
+ *
+ * DESCRIPTION: Translate an opcode into a human-readable string
+ *
+ ******************************************************************************/
+
+char *acpi_ps_get_opcode_name(u16 opcode)
+{
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
+
+ const struct acpi_opcode_info *op;
+
+ op = acpi_ps_get_opcode_info(opcode);
+
+ /* Always guaranteed to return a valid pointer */
+
+ return (op->name);
+
+#else
+ return ("OpcodeName unavailable");
+
+#endif
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_argument_count
+ *
+ * PARAMETERS: op_type - Type associated with the AML opcode
+ *
+ * RETURN: Argument count
+ *
+ * DESCRIPTION: Obtain the number of expected arguments for an AML opcode
+ *
+ ******************************************************************************/
+
+u8 acpi_ps_get_argument_count(u32 op_type)
+{
+
+ if (op_type <= AML_TYPE_EXEC_6A_0T_1R) {
+ return (acpi_gbl_argument_count[op_type]);
+ }
+
+ return (0);
+}
+
+/*
+ * This table is directly indexed by the opcodes It returns
+ * an index into the opcode table (acpi_gbl_aml_op_info)
+ */
+const u8 acpi_gbl_short_op_index[256] = {
+/* 0 1 2 3 4 5 6 7 */
+/* 8 9 A B C D E F */
+/* 0x00 */ 0x00, 0x01, _UNK, _UNK, _UNK, _UNK, 0x02, _UNK,
+/* 0x08 */ 0x03, _UNK, 0x04, 0x05, 0x06, 0x07, 0x6E, _UNK,
+/* 0x10 */ 0x08, 0x09, 0x0a, 0x6F, 0x0b, _UNK, _UNK, _UNK,
+/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x20 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x28 */ _UNK, _UNK, _UNK, _UNK, _UNK, 0x63, _PFX, _PFX,
+/* 0x30 */ 0x67, 0x66, 0x68, 0x65, 0x69, 0x64, 0x6A, 0x7D,
+/* 0x38 */ 0x7F, 0x80, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x40 */ _UNK, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
+/* 0x48 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
+/* 0x50 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
+/* 0x58 */ _ASC, _ASC, _ASC, _UNK, _PFX, _UNK, _PFX, _ASC,
+/* 0x60 */ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
+/* 0x68 */ 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, _UNK,
+/* 0x70 */ 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22,
+/* 0x78 */ 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
+/* 0x80 */ 0x2b, 0x2c, 0x2d, 0x2e, 0x70, 0x71, 0x2f, 0x30,
+/* 0x88 */ 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x72,
+/* 0x90 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x73, 0x74,
+/* 0x98 */ 0x75, 0x76, _UNK, _UNK, 0x77, 0x78, 0x79, 0x7A,
+/* 0xA0 */ 0x3e, 0x3f, 0x40, 0x41, 0x42, 0x43, 0x60, 0x61,
+/* 0xA8 */ 0x62, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xB0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xB8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xC0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xC8 */ _UNK, _UNK, _UNK, _UNK, 0x44, _UNK, _UNK, _UNK,
+/* 0xD0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xD8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xE0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xE8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xF0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0xF8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x45,
+};
+
+/*
+ * This table is indexed by the second opcode of the extended opcode
+ * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
+ */
+const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
+/* 0 1 2 3 4 5 6 7 */
+/* 8 9 A B C D E F */
+/* 0x00 */ _UNK, 0x46, 0x47, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x08 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x10 */ _UNK, _UNK, 0x48, 0x49, _UNK, _UNK, _UNK, _UNK,
+/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x7B,
+/* 0x20 */ 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, 0x51,
+/* 0x28 */ 0x52, 0x53, 0x54, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x30 */ 0x55, 0x56, 0x57, 0x7e, _UNK, _UNK, _UNK, _UNK,
+/* 0x38 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x40 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x48 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x50 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x58 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x60 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x68 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x70 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x78 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
+/* 0x80 */ 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+/* 0x88 */ 0x7C,
+};
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 2494caf4..abc4c48 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psscope.c b/drivers/acpi/acpica/psscope.c
index 608dc20..6a4b6fb 100644
--- a/drivers/acpi/acpica/psscope.c
+++ b/drivers/acpi/acpica/psscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c
index fdb2e71..c1934bf 100644
--- a/drivers/acpi/acpica/pstree.c
+++ b/drivers/acpi/acpica/pstree.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c
index 4137dcb..91fa73a 100644
--- a/drivers/acpi/acpica/psutils.c
+++ b/drivers/acpi/acpica/psutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -202,14 +202,6 @@
}
/*
- * Is "c" a namestring prefix character?
- */
-u8 acpi_ps_is_prefix_char(u32 c)
-{
- return ((u8) (c == '\\' || c == '^'));
-}
-
-/*
* Get op's name (4-byte name segment) or 0 if unnamed
*/
#ifdef ACPI_FUTURE_USAGE
diff --git a/drivers/acpi/acpica/pswalk.c b/drivers/acpi/acpica/pswalk.c
index ab96cf4..abd6562 100644
--- a/drivers/acpi/acpica/pswalk.c
+++ b/drivers/acpi/acpica/pswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c
index 963e162..f682542 100644
--- a/drivers/acpi/acpica/psxface.c
+++ b/drivers/acpi/acpica/psxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsaddr.c b/drivers/acpi/acpica/rsaddr.c
index 856ff07..f3a9276 100644
--- a/drivers/acpi/acpica/rsaddr.c
+++ b/drivers/acpi/acpica/rsaddr.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index 147feb6..7816d4ee 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -84,7 +84,7 @@
bit_field &= (u16) (bit_field - 1);
}
- return bits_set;
+ return (bits_set);
}
/*******************************************************************************
@@ -407,7 +407,9 @@
/* Validate the Resource Type and Resource Length */
- status = acpi_ut_validate_resource(aml_buffer, &resource_index);
+ status =
+ acpi_ut_validate_resource(NULL, aml_buffer,
+ &resource_index);
if (ACPI_FAILURE(status)) {
/*
* Exit on failure. Cannot continue because the descriptor length
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 311cbc4..f8b55b4 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -98,7 +98,7 @@
/* Perform the AML-to-Resource conversion */
- status = acpi_ut_walk_aml_resources(aml_buffer, aml_buffer_length,
+ status = acpi_ut_walk_aml_resources(NULL, aml_buffer, aml_buffer_length,
acpi_rs_convert_aml_to_resources,
¤t_resource_ptr);
if (status == AE_AML_NO_RESOURCE_END_TAG) {
@@ -174,7 +174,7 @@
/* Do the conversion */
resource = output_buffer->pointer;
- status = acpi_ut_walk_aml_resources(aml_start, aml_buffer_length,
+ status = acpi_ut_walk_aml_resources(NULL, aml_start, aml_buffer_length,
acpi_rs_convert_aml_to_resources,
&resource);
if (ACPI_FAILURE(status)) {
@@ -480,8 +480,7 @@
status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
- (u32) aml_size_needed,
- acpi_format_exception(status)));
+ (u32)aml_size_needed, acpi_format_exception(status)));
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c
index 4d11b072..cab5144 100644
--- a/drivers/acpi/acpica/rsdump.c
+++ b/drivers/acpi/acpica/rsdump.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -77,419 +77,16 @@
static void
acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table);
-#define ACPI_RSD_OFFSET(f) (u8) ACPI_OFFSET (union acpi_resource_data,f)
-#define ACPI_PRT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_pci_routing_table,f)
-#define ACPI_RSD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_rsdump_info))
-
-/*******************************************************************************
- *
- * Resource Descriptor info tables
- *
- * Note: The first table entry must be a Title or Literal and must contain
- * the table length (number of table entries)
- *
- ******************************************************************************/
-
-struct acpi_rsdump_info acpi_rs_dump_irq[7] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_irq), "IRQ", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.descriptor_length),
- "Descriptor Length", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.triggering), "Triggering",
- acpi_gbl_he_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.polarity), "Polarity",
- acpi_gbl_ll_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.sharable), "Sharing",
- acpi_gbl_shr_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.interrupt_count),
- "Interrupt Count", NULL},
- {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(irq.interrupts[0]),
- "Interrupt List", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_dma[6] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_dma), "DMA", NULL},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.type), "Speed",
- acpi_gbl_typ_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(dma.bus_master), "Mastering",
- acpi_gbl_bm_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.transfer), "Transfer Type",
- acpi_gbl_siz_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(dma.channel_count), "Channel Count",
- NULL},
- {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(dma.channels[0]), "Channel List",
- NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_start_dpf[4] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_start_dpf),
- "Start-Dependent-Functions", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(start_dpf.descriptor_length),
- "Descriptor Length", NULL},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.compatibility_priority),
- "Compatibility Priority", acpi_gbl_config_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.performance_robustness),
- "Performance/Robustness", acpi_gbl_config_decode}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_end_dpf[1] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_dpf),
- "End-Dependent-Functions", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_io[6] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io), "I/O", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(io.io_decode), "Address Decoding",
- acpi_gbl_io_decode},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.minimum), "Address Minimum", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.maximum), "Address Maximum", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.alignment), "Alignment", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.address_length), "Address Length",
- NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_fixed_io[3] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_io),
- "Fixed I/O", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_io.address), "Address", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_io.address_length),
- "Address Length", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_vendor[3] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_vendor),
- "Vendor Specific", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(vendor.byte_length), "Length", NULL},
- {ACPI_RSD_LONGLIST, ACPI_RSD_OFFSET(vendor.byte_data[0]), "Vendor Data",
- NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_end_tag[1] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_tag), "EndTag",
- NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_memory24[6] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory24),
- "24-Bit Memory Range", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory24.write_protect),
- "Write Protect", acpi_gbl_rw_decode},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.minimum), "Address Minimum",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.maximum), "Address Maximum",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.alignment), "Alignment",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.address_length),
- "Address Length", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_memory32[6] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory32),
- "32-Bit Memory Range", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory32.write_protect),
- "Write Protect", acpi_gbl_rw_decode},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.minimum), "Address Minimum",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.maximum), "Address Maximum",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.alignment), "Alignment",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.address_length),
- "Address Length", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[4] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_memory32),
- "32-Bit Fixed Memory Range", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(fixed_memory32.write_protect),
- "Write Protect", acpi_gbl_rw_decode},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address), "Address",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address_length),
- "Address Length", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_address16[8] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address16),
- "16-Bit WORD Address Space", NULL},
- {ACPI_RSD_ADDRESS, 0, NULL, NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.granularity), "Granularity",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.minimum), "Address Minimum",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.maximum), "Address Maximum",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.translation_offset),
- "Translation Offset", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.address_length),
- "Address Length", NULL},
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address16.resource_source), NULL, NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_address32[8] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address32),
- "32-Bit DWORD Address Space", NULL},
- {ACPI_RSD_ADDRESS, 0, NULL, NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.granularity), "Granularity",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.minimum), "Address Minimum",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.maximum), "Address Maximum",
- NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.translation_offset),
- "Translation Offset", NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.address_length),
- "Address Length", NULL},
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address32.resource_source), NULL, NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_address64[8] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address64),
- "64-Bit QWORD Address Space", NULL},
- {ACPI_RSD_ADDRESS, 0, NULL, NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.granularity), "Granularity",
- NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.minimum), "Address Minimum",
- NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.maximum), "Address Maximum",
- NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.translation_offset),
- "Translation Offset", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.address_length),
- "Address Length", NULL},
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address64.resource_source), NULL, NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_ext_address64[8] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_address64),
- "64-Bit Extended Address Space", NULL},
- {ACPI_RSD_ADDRESS, 0, NULL, NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.granularity),
- "Granularity", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.minimum),
- "Address Minimum", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.maximum),
- "Address Maximum", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.translation_offset),
- "Translation Offset", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.address_length),
- "Address Length", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.type_specific),
- "Type-Specific Attribute", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_ext_irq[8] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_irq),
- "Extended IRQ", NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.producer_consumer),
- "Type", acpi_gbl_consume_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.triggering),
- "Triggering", acpi_gbl_he_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.polarity), "Polarity",
- acpi_gbl_ll_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.sharable), "Sharing",
- acpi_gbl_shr_decode},
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(extended_irq.resource_source), NULL,
- NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(extended_irq.interrupt_count),
- "Interrupt Count", NULL},
- {ACPI_RSD_DWORDLIST, ACPI_RSD_OFFSET(extended_irq.interrupts[0]),
- "Interrupt List", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_generic_reg[6] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_generic_reg),
- "Generic Register", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.space_id), "Space ID",
- NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_width), "Bit Width",
- NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_offset), "Bit Offset",
- NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.access_size),
- "Access Size", NULL},
- {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(generic_reg.address), "Address", NULL}
-};
-
-struct acpi_rsdump_info acpi_rs_dump_gpio[16] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_gpio), "GPIO", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.revision_id), "RevisionId", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.connection_type),
- "ConnectionType", acpi_gbl_ct_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.producer_consumer),
- "ProducerConsumer", acpi_gbl_consume_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.pin_config), "PinConfig",
- acpi_gbl_ppc_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.sharable), "Sharable",
- acpi_gbl_shr_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.io_restriction),
- "IoRestriction", acpi_gbl_ior_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.triggering), "Triggering",
- acpi_gbl_he_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.polarity), "Polarity",
- acpi_gbl_ll_decode},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.drive_strength), "DriveStrength",
- NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.debounce_timeout),
- "DebounceTimeout", NULL},
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(gpio.resource_source),
- "ResourceSource", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.pin_table_length),
- "PinTableLength", NULL},
- {ACPI_RSD_WORDLIST, ACPI_RSD_OFFSET(gpio.pin_table), "PinTable", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.vendor_length), "VendorLength",
- NULL},
- {ACPI_RSD_SHORTLISTX, ACPI_RSD_OFFSET(gpio.vendor_data), "VendorData",
- NULL},
-};
-
-struct acpi_rsdump_info acpi_rs_dump_fixed_dma[4] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_dma),
- "FixedDma", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.request_lines),
- "RequestLines", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.channels), "Channels",
- NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_dma.width), "TransferWidth",
- acpi_gbl_dts_decode},
-};
-
-#define ACPI_RS_DUMP_COMMON_SERIAL_BUS \
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.revision_id), "RevisionId", NULL}, \
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type), "Type", acpi_gbl_sbt_decode}, \
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.producer_consumer), "ProducerConsumer", acpi_gbl_consume_decode}, \
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.slave_mode), "SlaveMode", acpi_gbl_sm_decode}, \
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type_revision_id), "TypeRevisionId", NULL}, \
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.type_data_length), "TypeDataLength", NULL}, \
- {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET (common_serial_bus.resource_source), "ResourceSource", NULL}, \
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.vendor_length), "VendorLength", NULL}, \
- {ACPI_RSD_SHORTLISTX,ACPI_RSD_OFFSET (common_serial_bus.vendor_data), "VendorData", NULL},
-
-struct acpi_rsdump_info acpi_rs_dump_common_serial_bus[10] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_common_serial_bus),
- "Common Serial Bus", NULL},
- ACPI_RS_DUMP_COMMON_SERIAL_BUS
-};
-
-struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[13] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_i2c_serial_bus),
- "I2C Serial Bus", NULL},
- ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG,
- ACPI_RSD_OFFSET(i2c_serial_bus.
- access_mode),
- "AccessMode", acpi_gbl_am_decode},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(i2c_serial_bus.connection_speed),
- "ConnectionSpeed", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(i2c_serial_bus.slave_address),
- "SlaveAddress", NULL},
-};
-
-struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[17] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_spi_serial_bus),
- "Spi Serial Bus", NULL},
- ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG,
- ACPI_RSD_OFFSET(spi_serial_bus.
- wire_mode), "WireMode",
- acpi_gbl_wm_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(spi_serial_bus.device_polarity),
- "DevicePolarity", acpi_gbl_dp_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.data_bit_length),
- "DataBitLength", NULL},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_phase),
- "ClockPhase", acpi_gbl_cph_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_polarity),
- "ClockPolarity", acpi_gbl_cpo_decode},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(spi_serial_bus.device_selection),
- "DeviceSelection", NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(spi_serial_bus.connection_speed),
- "ConnectionSpeed", NULL},
-};
-
-struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[19] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_uart_serial_bus),
- "Uart Serial Bus", NULL},
- ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_2BITFLAG,
- ACPI_RSD_OFFSET(uart_serial_bus.
- flow_control),
- "FlowControl", acpi_gbl_fc_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.stop_bits),
- "StopBits", acpi_gbl_sb_decode},
- {ACPI_RSD_3BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.data_bits),
- "DataBits", acpi_gbl_bpb_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.endian), "Endian",
- acpi_gbl_ed_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.parity), "Parity",
- acpi_gbl_pt_decode},
- {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.lines_enabled),
- "LinesEnabled", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.rx_fifo_size),
- "RxFifoSize", NULL},
- {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.tx_fifo_size),
- "TxFifoSize", NULL},
- {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(uart_serial_bus.default_baud_rate),
- "ConnectionSpeed", NULL},
-};
-
-/*
- * Tables used for common address descriptor flag fields
- */
-static struct acpi_rsdump_info acpi_rs_dump_general_flags[5] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_general_flags), NULL,
- NULL},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.producer_consumer),
- "Consumer/Producer", acpi_gbl_consume_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.decode), "Address Decode",
- acpi_gbl_dec_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.min_address_fixed),
- "Min Relocatability", acpi_gbl_min_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.max_address_fixed),
- "Max Relocatability", acpi_gbl_max_decode}
-};
-
-static struct acpi_rsdump_info acpi_rs_dump_memory_flags[5] = {
- {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory_flags),
- "Resource Type", (void *)"Memory Range"},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.write_protect),
- "Write Protect", acpi_gbl_rw_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.caching),
- "Caching", acpi_gbl_mem_decode},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.range_type),
- "Range Type", acpi_gbl_mtp_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.translation),
- "Translation", acpi_gbl_ttp_decode}
-};
-
-static struct acpi_rsdump_info acpi_rs_dump_io_flags[4] = {
- {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io_flags),
- "Resource Type", (void *)"I/O Range"},
- {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.io.range_type),
- "Range Type", acpi_gbl_rng_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation),
- "Translation", acpi_gbl_ttp_decode},
- {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation_type),
- "Translation Type", acpi_gbl_trs_decode}
-};
-
-/*
- * Table used to dump _PRT contents
- */
-static struct acpi_rsdump_info acpi_rs_dump_prt[5] = {
- {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_prt), NULL, NULL},
- {ACPI_RSD_UINT64, ACPI_PRT_OFFSET(address), "Address", NULL},
- {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(pin), "Pin", NULL},
- {ACPI_RSD_STRING, ACPI_PRT_OFFSET(source[0]), "Source", NULL},
- {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(source_index), "Source Index", NULL}
-};
-
/*******************************************************************************
*
* FUNCTION: acpi_rs_dump_descriptor
*
- * PARAMETERS: Resource
+ * PARAMETERS: resource - Buffer containing the resource
+ * table - Table entry to decode the resource
*
* RETURN: None
*
- * DESCRIPTION:
+ * DESCRIPTION: Dump a resource descriptor based on a dump table entry.
*
******************************************************************************/
@@ -654,7 +251,8 @@
/*
* Optional resource_source for Address resources
*/
- acpi_rs_dump_resource_source(ACPI_CAST_PTR(struct
+ acpi_rs_dump_resource_source(ACPI_CAST_PTR
+ (struct
acpi_resource_source,
target));
break;
@@ -765,8 +363,9 @@
ACPI_FUNCTION_ENTRY();
- if (!(acpi_dbg_level & ACPI_LV_RESOURCES)
- || !(_COMPONENT & acpi_dbg_layer)) {
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_RESOURCES, _COMPONENT)) {
return;
}
@@ -827,8 +426,9 @@
ACPI_FUNCTION_ENTRY();
- if (!(acpi_dbg_level & ACPI_LV_RESOURCES)
- || !(_COMPONENT & acpi_dbg_layer)) {
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(ACPI_LV_RESOURCES, _COMPONENT)) {
return;
}
diff --git a/drivers/acpi/acpica/rsdumpinfo.c b/drivers/acpi/acpica/rsdumpinfo.c
new file mode 100644
index 0000000..46192bd
--- /dev/null
+++ b/drivers/acpi/acpica/rsdumpinfo.c
@@ -0,0 +1,454 @@
+/*******************************************************************************
+ *
+ * Module Name: rsdumpinfo - Tables used to display resource descriptors.
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acresrc.h"
+
+#define _COMPONENT ACPI_RESOURCES
+ACPI_MODULE_NAME("rsdumpinfo")
+
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+#define ACPI_RSD_OFFSET(f) (u8) ACPI_OFFSET (union acpi_resource_data,f)
+#define ACPI_PRT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_pci_routing_table,f)
+#define ACPI_RSD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_rsdump_info))
+/*******************************************************************************
+ *
+ * Resource Descriptor info tables
+ *
+ * Note: The first table entry must be a Title or Literal and must contain
+ * the table length (number of table entries)
+ *
+ ******************************************************************************/
+struct acpi_rsdump_info acpi_rs_dump_irq[7] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_irq), "IRQ", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.descriptor_length),
+ "Descriptor Length", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.triggering), "Triggering",
+ acpi_gbl_he_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.polarity), "Polarity",
+ acpi_gbl_ll_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(irq.sharable), "Sharing",
+ acpi_gbl_shr_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.interrupt_count),
+ "Interrupt Count", NULL},
+ {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(irq.interrupts[0]),
+ "Interrupt List", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_dma[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_dma), "DMA", NULL},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.type), "Speed",
+ acpi_gbl_typ_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(dma.bus_master), "Mastering",
+ acpi_gbl_bm_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.transfer), "Transfer Type",
+ acpi_gbl_siz_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(dma.channel_count), "Channel Count",
+ NULL},
+ {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(dma.channels[0]), "Channel List",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_start_dpf[4] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_start_dpf),
+ "Start-Dependent-Functions", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(start_dpf.descriptor_length),
+ "Descriptor Length", NULL},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.compatibility_priority),
+ "Compatibility Priority", acpi_gbl_config_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.performance_robustness),
+ "Performance/Robustness", acpi_gbl_config_decode}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_end_dpf[1] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_dpf),
+ "End-Dependent-Functions", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_io[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io), "I/O", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(io.io_decode), "Address Decoding",
+ acpi_gbl_io_decode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.minimum), "Address Minimum", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.maximum), "Address Maximum", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.alignment), "Alignment", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.address_length), "Address Length",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_fixed_io[3] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_io),
+ "Fixed I/O", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_io.address), "Address", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_io.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_vendor[3] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_vendor),
+ "Vendor Specific", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(vendor.byte_length), "Length", NULL},
+ {ACPI_RSD_LONGLIST, ACPI_RSD_OFFSET(vendor.byte_data[0]), "Vendor Data",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_end_tag[1] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_tag), "EndTag",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_memory24[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory24),
+ "24-Bit Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory24.write_protect),
+ "Write Protect", acpi_gbl_rw_decode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.alignment), "Alignment",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_memory32[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory32),
+ "32-Bit Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory32.write_protect),
+ "Write Protect", acpi_gbl_rw_decode},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.alignment), "Alignment",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[4] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_memory32),
+ "32-Bit Fixed Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(fixed_memory32.write_protect),
+ "Write Protect", acpi_gbl_rw_decode},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address), "Address",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address16[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address16),
+ "16-Bit WORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address16.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address32[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address32),
+ "32-Bit DWORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address32.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address64[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address64),
+ "64-Bit QWORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address64.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_ext_address64[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_address64),
+ "64-Bit Extended Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.granularity),
+ "Granularity", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.minimum),
+ "Address Minimum", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.maximum),
+ "Address Maximum", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.type_specific),
+ "Type-Specific Attribute", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_ext_irq[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_irq),
+ "Extended IRQ", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.producer_consumer),
+ "Type", acpi_gbl_consume_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.triggering),
+ "Triggering", acpi_gbl_he_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.polarity), "Polarity",
+ acpi_gbl_ll_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(extended_irq.sharable), "Sharing",
+ acpi_gbl_shr_decode},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(extended_irq.resource_source), NULL,
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(extended_irq.interrupt_count),
+ "Interrupt Count", NULL},
+ {ACPI_RSD_DWORDLIST, ACPI_RSD_OFFSET(extended_irq.interrupts[0]),
+ "Interrupt List", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_generic_reg[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_generic_reg),
+ "Generic Register", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.space_id), "Space ID",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_width), "Bit Width",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_offset), "Bit Offset",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.access_size),
+ "Access Size", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(generic_reg.address), "Address", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_gpio[16] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_gpio), "GPIO", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.revision_id), "RevisionId", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.connection_type),
+ "ConnectionType", acpi_gbl_ct_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.producer_consumer),
+ "ProducerConsumer", acpi_gbl_consume_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.pin_config), "PinConfig",
+ acpi_gbl_ppc_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.sharable), "Sharing",
+ acpi_gbl_shr_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.io_restriction),
+ "IoRestriction", acpi_gbl_ior_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.triggering), "Triggering",
+ acpi_gbl_he_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.polarity), "Polarity",
+ acpi_gbl_ll_decode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.drive_strength), "DriveStrength",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.debounce_timeout),
+ "DebounceTimeout", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(gpio.resource_source),
+ "ResourceSource", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.pin_table_length),
+ "PinTableLength", NULL},
+ {ACPI_RSD_WORDLIST, ACPI_RSD_OFFSET(gpio.pin_table), "PinTable", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.vendor_length), "VendorLength",
+ NULL},
+ {ACPI_RSD_SHORTLISTX, ACPI_RSD_OFFSET(gpio.vendor_data), "VendorData",
+ NULL},
+};
+
+struct acpi_rsdump_info acpi_rs_dump_fixed_dma[4] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_dma),
+ "FixedDma", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.request_lines),
+ "RequestLines", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.channels), "Channels",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_dma.width), "TransferWidth",
+ acpi_gbl_dts_decode},
+};
+
+#define ACPI_RS_DUMP_COMMON_SERIAL_BUS \
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.revision_id), "RevisionId", NULL}, \
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type), "Type", acpi_gbl_sbt_decode}, \
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.producer_consumer), "ProducerConsumer", acpi_gbl_consume_decode}, \
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.slave_mode), "SlaveMode", acpi_gbl_sm_decode}, \
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type_revision_id), "TypeRevisionId", NULL}, \
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.type_data_length), "TypeDataLength", NULL}, \
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET (common_serial_bus.resource_source), "ResourceSource", NULL}, \
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.vendor_length), "VendorLength", NULL}, \
+ {ACPI_RSD_SHORTLISTX,ACPI_RSD_OFFSET (common_serial_bus.vendor_data), "VendorData", NULL},
+
+struct acpi_rsdump_info acpi_rs_dump_common_serial_bus[10] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_common_serial_bus),
+ "Common Serial Bus", NULL},
+ ACPI_RS_DUMP_COMMON_SERIAL_BUS
+};
+
+struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[13] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_i2c_serial_bus),
+ "I2C Serial Bus", NULL},
+ ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG,
+ ACPI_RSD_OFFSET(i2c_serial_bus.
+ access_mode),
+ "AccessMode", acpi_gbl_am_decode},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(i2c_serial_bus.connection_speed),
+ "ConnectionSpeed", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(i2c_serial_bus.slave_address),
+ "SlaveAddress", NULL},
+};
+
+struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[17] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_spi_serial_bus),
+ "Spi Serial Bus", NULL},
+ ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG,
+ ACPI_RSD_OFFSET(spi_serial_bus.
+ wire_mode), "WireMode",
+ acpi_gbl_wm_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(spi_serial_bus.device_polarity),
+ "DevicePolarity", acpi_gbl_dp_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.data_bit_length),
+ "DataBitLength", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_phase),
+ "ClockPhase", acpi_gbl_cph_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_polarity),
+ "ClockPolarity", acpi_gbl_cpo_decode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(spi_serial_bus.device_selection),
+ "DeviceSelection", NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(spi_serial_bus.connection_speed),
+ "ConnectionSpeed", NULL},
+};
+
+struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[19] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_uart_serial_bus),
+ "Uart Serial Bus", NULL},
+ ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_2BITFLAG,
+ ACPI_RSD_OFFSET(uart_serial_bus.
+ flow_control),
+ "FlowControl", acpi_gbl_fc_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.stop_bits),
+ "StopBits", acpi_gbl_sb_decode},
+ {ACPI_RSD_3BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.data_bits),
+ "DataBits", acpi_gbl_bpb_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.endian), "Endian",
+ acpi_gbl_ed_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.parity), "Parity",
+ acpi_gbl_pt_decode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.lines_enabled),
+ "LinesEnabled", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.rx_fifo_size),
+ "RxFifoSize", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.tx_fifo_size),
+ "TxFifoSize", NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(uart_serial_bus.default_baud_rate),
+ "ConnectionSpeed", NULL},
+};
+
+/*
+ * Tables used for common address descriptor flag fields
+ */
+struct acpi_rsdump_info acpi_rs_dump_general_flags[5] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_general_flags), NULL,
+ NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.producer_consumer),
+ "Consumer/Producer", acpi_gbl_consume_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.decode), "Address Decode",
+ acpi_gbl_dec_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.min_address_fixed),
+ "Min Relocatability", acpi_gbl_min_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.max_address_fixed),
+ "Max Relocatability", acpi_gbl_max_decode}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_memory_flags[5] = {
+ {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory_flags),
+ "Resource Type", (void *)"Memory Range"},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.write_protect),
+ "Write Protect", acpi_gbl_rw_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.caching),
+ "Caching", acpi_gbl_mem_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.range_type),
+ "Range Type", acpi_gbl_mtp_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.translation),
+ "Translation", acpi_gbl_ttp_decode}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_io_flags[4] = {
+ {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io_flags),
+ "Resource Type", (void *)"I/O Range"},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.io.range_type),
+ "Range Type", acpi_gbl_rng_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation),
+ "Translation", acpi_gbl_ttp_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation_type),
+ "Translation Type", acpi_gbl_trs_decode}
+};
+
+/*
+ * Table used to dump _PRT contents
+ */
+struct acpi_rsdump_info acpi_rs_dump_prt[5] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_prt), NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_PRT_OFFSET(address), "Address", NULL},
+ {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(pin), "Pin", NULL},
+ {ACPI_RSD_STRING, ACPI_PRT_OFFSET(source[0]), "Source", NULL},
+ {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(source_index), "Source Index", NULL}
+};
+
+#endif
diff --git a/drivers/acpi/acpica/rsinfo.c b/drivers/acpi/acpica/rsinfo.c
index a9fa515..41fed78 100644
--- a/drivers/acpi/acpica/rsinfo.c
+++ b/drivers/acpi/acpica/rsinfo.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsio.c b/drivers/acpi/acpica/rsio.c
index f6a0810..ca18375 100644
--- a/drivers/acpi/acpica/rsio.c
+++ b/drivers/acpi/acpica/rsio.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsirq.c b/drivers/acpi/acpica/rsirq.c
index e23a9ec..364decc 100644
--- a/drivers/acpi/acpica/rsirq.c
+++ b/drivers/acpi/acpica/rsirq.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -53,7 +53,7 @@
* acpi_rs_get_irq
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_get_irq[8] = {
+struct acpi_rsconvert_info acpi_rs_get_irq[9] = {
{ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_IRQ,
ACPI_RS_SIZE(struct acpi_resource_irq),
ACPI_RSC_TABLE_SIZE(acpi_rs_get_irq)},
@@ -80,41 +80,7 @@
{ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 3},
- /* Get flags: Triggering[0], Polarity[3], Sharing[4] */
-
- {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
- AML_OFFSET(irq.flags),
- 0},
-
- {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity),
- AML_OFFSET(irq.flags),
- 3},
-
- {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable),
- AML_OFFSET(irq.flags),
- 4}
-};
-
-/*******************************************************************************
- *
- * acpi_rs_set_irq
- *
- ******************************************************************************/
-
-struct acpi_rsconvert_info acpi_rs_set_irq[13] = {
- /* Start with a default descriptor of length 3 */
-
- {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IRQ,
- sizeof(struct aml_resource_irq),
- ACPI_RSC_TABLE_SIZE(acpi_rs_set_irq)},
-
- /* Convert interrupt list to 16-bit IRQ bitmask */
-
- {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]),
- AML_OFFSET(irq.irq_mask),
- ACPI_RS_OFFSET(data.irq.interrupt_count)},
-
- /* Set the flags byte */
+ /* Get flags: Triggering[0], Polarity[3], Sharing[4], Wake[5] */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
AML_OFFSET(irq.flags),
@@ -128,6 +94,48 @@
AML_OFFSET(irq.flags),
4},
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.wake_capable),
+ AML_OFFSET(irq.flags),
+ 5}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_set_irq
+ *
+ ******************************************************************************/
+
+struct acpi_rsconvert_info acpi_rs_set_irq[14] = {
+ /* Start with a default descriptor of length 3 */
+
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IRQ,
+ sizeof(struct aml_resource_irq),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_set_irq)},
+
+ /* Convert interrupt list to 16-bit IRQ bitmask */
+
+ {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]),
+ AML_OFFSET(irq.irq_mask),
+ ACPI_RS_OFFSET(data.irq.interrupt_count)},
+
+ /* Set flags: Triggering[0], Polarity[3], Sharing[4], Wake[5] */
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
+ AML_OFFSET(irq.flags),
+ 0},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity),
+ AML_OFFSET(irq.flags),
+ 3},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable),
+ AML_OFFSET(irq.flags),
+ 4},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.wake_capable),
+ AML_OFFSET(irq.flags),
+ 5},
+
/*
* All done if the output descriptor length is required to be 3
* (i.e., optimization to 2 bytes cannot be attempted)
@@ -181,7 +189,7 @@
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_convert_ext_irq[9] = {
+struct acpi_rsconvert_info acpi_rs_convert_ext_irq[10] = {
{ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_EXTENDED_IRQ,
ACPI_RS_SIZE(struct acpi_resource_extended_irq),
ACPI_RSC_TABLE_SIZE(acpi_rs_convert_ext_irq)},
@@ -190,8 +198,10 @@
sizeof(struct aml_resource_extended_irq),
0},
- /* Flag bits */
-
+ /*
+ * Flags: Producer/Consumer[0], Triggering[1], Polarity[2],
+ * Sharing[3], Wake[4]
+ */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.producer_consumer),
AML_OFFSET(extended_irq.flags),
0},
@@ -208,19 +218,21 @@
AML_OFFSET(extended_irq.flags),
3},
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.wake_capable),
+ AML_OFFSET(extended_irq.flags),
+ 4},
+
/* IRQ Table length (Byte4) */
{ACPI_RSC_COUNT, ACPI_RS_OFFSET(data.extended_irq.interrupt_count),
AML_OFFSET(extended_irq.interrupt_count),
- sizeof(u32)}
- ,
+ sizeof(u32)},
/* Copy every IRQ in the table, each is 32 bits */
{ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.extended_irq.interrupts[0]),
AML_OFFSET(extended_irq.interrupts[0]),
- 0}
- ,
+ 0},
/* Optional resource_source (Index and String) */
@@ -285,7 +297,6 @@
* request_lines
* Channels
*/
-
{ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.fixed_dma.request_lines),
AML_OFFSET(fixed_dma.request_lines),
2},
@@ -293,5 +304,4 @@
{ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.fixed_dma.width),
AML_OFFSET(fixed_dma.width),
1},
-
};
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index 8b64db9..ee2e206 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -217,9 +217,10 @@
/* Perform final sanity check on the new AML resource descriptor */
- status =
- acpi_ut_validate_resource(ACPI_CAST_PTR
- (union aml_resource, aml), NULL);
+ status = acpi_ut_validate_resource(NULL,
+ ACPI_CAST_PTR(union
+ aml_resource,
+ aml), NULL);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/rsmemory.c b/drivers/acpi/acpica/rsmemory.c
index 4fd611a..ebc773a 100644
--- a/drivers/acpi/acpica/rsmemory.c
+++ b/drivers/acpi/acpica/rsmemory.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -156,8 +156,7 @@
{ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
0,
- sizeof(u8)}
- ,
+ sizeof(u8)},
/* Vendor data */
@@ -181,8 +180,7 @@
{ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
0,
- sizeof(u8)}
- ,
+ sizeof(u8)},
/* Vendor data */
diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c
index c6f291c..d5bf05a 100644
--- a/drivers/acpi/acpica/rsmisc.c
+++ b/drivers/acpi/acpica/rsmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -136,30 +136,30 @@
/*
* Mask and shift the flag bit
*/
- ACPI_SET8(destination) = (u8)
- ((ACPI_GET8(source) >> info->value) & 0x01);
+ ACPI_SET8(destination,
+ ((ACPI_GET8(source) >> info->value) & 0x01));
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
- ACPI_SET8(destination) = (u8)
- ((ACPI_GET8(source) >> info->value) & 0x03);
+ ACPI_SET8(destination,
+ ((ACPI_GET8(source) >> info->value) & 0x03));
break;
case ACPI_RSC_3BITFLAG:
/*
* Mask and shift the flag bits
*/
- ACPI_SET8(destination) = (u8)
- ((ACPI_GET8(source) >> info->value) & 0x07);
+ ACPI_SET8(destination,
+ ((ACPI_GET8(source) >> info->value) & 0x07));
break;
case ACPI_RSC_COUNT:
item_count = ACPI_GET8(source);
- ACPI_SET8(destination) = (u8) item_count;
+ ACPI_SET8(destination, item_count);
resource->length = resource->length +
(info->value * (item_count - 1));
@@ -168,7 +168,7 @@
case ACPI_RSC_COUNT16:
item_count = aml_resource_length;
- ACPI_SET16(destination) = item_count;
+ ACPI_SET16(destination, item_count);
resource->length = resource->length +
(info->value * (item_count - 1));
@@ -181,13 +181,13 @@
resource->length = resource->length + item_count;
item_count = item_count / 2;
- ACPI_SET16(destination) = item_count;
+ ACPI_SET16(destination, item_count);
break;
case ACPI_RSC_COUNT_GPIO_VEN:
item_count = ACPI_GET8(source);
- ACPI_SET8(destination) = (u8)item_count;
+ ACPI_SET8(destination, item_count);
resource->length = resource->length +
(info->value * item_count);
@@ -216,7 +216,7 @@
}
resource->length = resource->length + item_count;
- ACPI_SET16(destination) = item_count;
+ ACPI_SET16(destination, item_count);
break;
case ACPI_RSC_COUNT_SERIAL_VEN:
@@ -224,7 +224,7 @@
item_count = ACPI_GET16(source) - info->value;
resource->length = resource->length + item_count;
- ACPI_SET16(destination) = item_count;
+ ACPI_SET16(destination, item_count);
break;
case ACPI_RSC_COUNT_SERIAL_RES:
@@ -234,7 +234,7 @@
- ACPI_GET16(source) - info->value;
resource->length = resource->length + item_count;
- ACPI_SET16(destination) = item_count;
+ ACPI_SET16(destination, item_count);
break;
case ACPI_RSC_LENGTH:
@@ -385,7 +385,7 @@
}
target = ACPI_ADD_PTR(char, resource, info->value);
- ACPI_SET8(target) = (u8) item_count;
+ ACPI_SET8(target, item_count);
break;
case ACPI_RSC_BITMASK16:
@@ -401,7 +401,7 @@
}
target = ACPI_ADD_PTR(char, resource, info->value);
- ACPI_SET8(target) = (u8) item_count;
+ ACPI_SET8(target, item_count);
break;
case ACPI_RSC_EXIT_NE:
@@ -514,37 +514,40 @@
/*
* Clear the flag byte
*/
- ACPI_SET8(destination) = 0;
+ ACPI_SET8(destination, 0);
break;
case ACPI_RSC_1BITFLAG:
/*
* Mask and shift the flag bit
*/
- ACPI_SET8(destination) |= (u8)
- ((ACPI_GET8(source) & 0x01) << info->value);
+ ACPI_SET_BIT(*ACPI_CAST8(destination), (u8)
+ ((ACPI_GET8(source) & 0x01) << info->
+ value));
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
- ACPI_SET8(destination) |= (u8)
- ((ACPI_GET8(source) & 0x03) << info->value);
+ ACPI_SET_BIT(*ACPI_CAST8(destination), (u8)
+ ((ACPI_GET8(source) & 0x03) << info->
+ value));
break;
case ACPI_RSC_3BITFLAG:
/*
* Mask and shift the flag bits
*/
- ACPI_SET8(destination) |= (u8)
- ((ACPI_GET8(source) & 0x07) << info->value);
+ ACPI_SET_BIT(*ACPI_CAST8(destination), (u8)
+ ((ACPI_GET8(source) & 0x07) << info->
+ value));
break;
case ACPI_RSC_COUNT:
item_count = ACPI_GET8(source);
- ACPI_SET8(destination) = (u8) item_count;
+ ACPI_SET8(destination, item_count);
aml_length =
(u16) (aml_length +
@@ -561,18 +564,18 @@
case ACPI_RSC_COUNT_GPIO_PIN:
item_count = ACPI_GET16(source);
- ACPI_SET16(destination) = (u16)aml_length;
+ ACPI_SET16(destination, aml_length);
aml_length = (u16)(aml_length + item_count * 2);
target = ACPI_ADD_PTR(void, aml, info->value);
- ACPI_SET16(target) = (u16)aml_length;
+ ACPI_SET16(target, aml_length);
acpi_rs_set_resource_length(aml_length, aml);
break;
case ACPI_RSC_COUNT_GPIO_VEN:
item_count = ACPI_GET16(source);
- ACPI_SET16(destination) = (u16)item_count;
+ ACPI_SET16(destination, item_count);
aml_length =
(u16)(aml_length + (info->value * item_count));
@@ -584,7 +587,7 @@
/* Set resource source string length */
item_count = ACPI_GET16(source);
- ACPI_SET16(destination) = (u16)aml_length;
+ ACPI_SET16(destination, aml_length);
/* Compute offset for the Vendor Data */
@@ -594,7 +597,7 @@
/* Set vendor offset only if there is vendor data */
if (resource->data.gpio.vendor_length) {
- ACPI_SET16(target) = (u16)aml_length;
+ ACPI_SET16(target, aml_length);
}
acpi_rs_set_resource_length(aml_length, aml);
@@ -603,7 +606,7 @@
case ACPI_RSC_COUNT_SERIAL_VEN:
item_count = ACPI_GET16(source);
- ACPI_SET16(destination) = item_count + info->value;
+ ACPI_SET16(destination, item_count + info->value);
aml_length = (u16)(aml_length + item_count);
acpi_rs_set_resource_length(aml_length, aml);
break;
@@ -686,7 +689,8 @@
* Optional resource_source (Index and String)
*/
aml_length =
- acpi_rs_set_resource_source(aml, (acpi_rs_length)
+ acpi_rs_set_resource_source(aml,
+ (acpi_rs_length)
aml_length, source);
acpi_rs_set_resource_length(aml_length, aml);
break;
@@ -706,10 +710,12 @@
/*
* 8-bit encoded bitmask (DMA macro)
*/
- ACPI_SET8(destination) = (u8)
- acpi_rs_encode_bitmask(source,
- *ACPI_ADD_PTR(u8, resource,
- info->value));
+ ACPI_SET8(destination,
+ acpi_rs_encode_bitmask(source,
+ *ACPI_ADD_PTR(u8,
+ resource,
+ info->
+ value)));
break;
case ACPI_RSC_BITMASK16:
diff --git a/drivers/acpi/acpica/rsserial.c b/drivers/acpi/acpica/rsserial.c
index 9aa5e68..fe49fc4 100644
--- a/drivers/acpi/acpica/rsserial.c
+++ b/drivers/acpi/acpica/rsserial.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -53,7 +53,7 @@
* acpi_rs_convert_gpio
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_convert_gpio[17] = {
+struct acpi_rsconvert_info acpi_rs_convert_gpio[18] = {
{ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_GPIO,
ACPI_RS_SIZE(struct acpi_resource_gpio),
ACPI_RSC_TABLE_SIZE(acpi_rs_convert_gpio)},
@@ -75,10 +75,14 @@
AML_OFFSET(gpio.flags),
0},
- {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.gpio.sharable),
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.gpio.sharable),
AML_OFFSET(gpio.int_flags),
3},
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.gpio.wake_capable),
+ AML_OFFSET(gpio.int_flags),
+ 4},
+
{ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.gpio.io_restriction),
AML_OFFSET(gpio.int_flags),
0},
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index 37d5241..a44953c 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -108,7 +108,7 @@
mask |= (0x1 << list[i]);
}
- return mask;
+ return (mask);
}
/*******************************************************************************
@@ -358,8 +358,10 @@
*
* Zero the entire area of the buffer.
*/
- total_length = (u32)
- ACPI_STRLEN(ACPI_CAST_PTR(char, &aml_resource_source[1])) + 1;
+ total_length =
+ (u32)
+ ACPI_STRLEN(ACPI_CAST_PTR(char, &aml_resource_source[1])) +
+ 1;
total_length = (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(total_length);
ACPI_MEMSET(resource_source->string_ptr, 0, total_length);
@@ -675,7 +677,9 @@
/* Execute the method, no parameters */
status =
- acpi_ut_evaluate_object(handle, path, ACPI_BTYPE_BUFFER, &obj_desc);
+ acpi_ut_evaluate_object(ACPI_CAST_PTR
+ (struct acpi_namespace_node, handle), path,
+ ACPI_BTYPE_BUFFER, &obj_desc);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index 5aad744..15d6eae 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -423,7 +423,7 @@
*
* RETURN: Status
*
- * DESCRIPTION: Walk a resource template for the specified evice to find a
+ * DESCRIPTION: Walk a resource template for the specified device to find a
* vendor-defined resource that matches the supplied UUID and
* UUID subtype. Returns a struct acpi_resource of type Vendor.
*
@@ -522,57 +522,42 @@
/*******************************************************************************
*
- * FUNCTION: acpi_walk_resources
+ * FUNCTION: acpi_walk_resource_buffer
*
- * PARAMETERS: device_handle - Handle to the device object for the
- * device we are querying
- * name - Method name of the resources we want.
- * (METHOD_NAME__CRS, METHOD_NAME__PRS, or
- * METHOD_NAME__AEI)
+ * PARAMETERS: buffer - Formatted buffer returned by one of the
+ * various Get*Resource functions
* user_function - Called for each resource
* context - Passed to user_function
*
* RETURN: Status
*
- * DESCRIPTION: Retrieves the current or possible resource list for the
- * specified device. The user_function is called once for
- * each resource in the list.
+ * DESCRIPTION: Walks the input resource template. The user_function is called
+ * once for each resource in the list.
*
******************************************************************************/
+
acpi_status
-acpi_walk_resources(acpi_handle device_handle,
- char *name,
- acpi_walk_resource_callback user_function, void *context)
+acpi_walk_resource_buffer(struct acpi_buffer * buffer,
+ acpi_walk_resource_callback user_function,
+ void *context)
{
- acpi_status status;
- struct acpi_buffer buffer;
+ acpi_status status = AE_OK;
struct acpi_resource *resource;
struct acpi_resource *resource_end;
- ACPI_FUNCTION_TRACE(acpi_walk_resources);
+ ACPI_FUNCTION_TRACE(acpi_walk_resource_buffer);
/* Parameter validation */
- if (!device_handle || !user_function || !name ||
- (!ACPI_COMPARE_NAME(name, METHOD_NAME__CRS) &&
- !ACPI_COMPARE_NAME(name, METHOD_NAME__PRS) &&
- !ACPI_COMPARE_NAME(name, METHOD_NAME__AEI))) {
+ if (!buffer || !buffer->pointer || !user_function) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Get the _CRS/_PRS/_AEI resource list */
+ /* Buffer contains the resource list and length */
- buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_rs_get_method_data(device_handle, name, &buffer);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Buffer now contains the resource list */
-
- resource = ACPI_CAST_PTR(struct acpi_resource, buffer.pointer);
+ resource = ACPI_CAST_PTR(struct acpi_resource, buffer->pointer);
resource_end =
- ACPI_ADD_PTR(struct acpi_resource, buffer.pointer, buffer.length);
+ ACPI_ADD_PTR(struct acpi_resource, buffer->pointer, buffer->length);
/* Walk the resource list until the end_tag is found (or buffer end) */
@@ -606,11 +591,63 @@
/* Get the next resource descriptor */
- resource =
- ACPI_ADD_PTR(struct acpi_resource, resource,
- resource->length);
+ resource = ACPI_NEXT_RESOURCE(resource);
}
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_walk_resource_buffer)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_walk_resources
+ *
+ * PARAMETERS: device_handle - Handle to the device object for the
+ * device we are querying
+ * name - Method name of the resources we want.
+ * (METHOD_NAME__CRS, METHOD_NAME__PRS, or
+ * METHOD_NAME__AEI)
+ * user_function - Called for each resource
+ * context - Passed to user_function
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Retrieves the current or possible resource list for the
+ * specified device. The user_function is called once for
+ * each resource in the list.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_walk_resources(acpi_handle device_handle,
+ char *name,
+ acpi_walk_resource_callback user_function, void *context)
+{
+ acpi_status status;
+ struct acpi_buffer buffer;
+
+ ACPI_FUNCTION_TRACE(acpi_walk_resources);
+
+ /* Parameter validation */
+
+ if (!device_handle || !user_function || !name ||
+ (!ACPI_COMPARE_NAME(name, METHOD_NAME__CRS) &&
+ !ACPI_COMPARE_NAME(name, METHOD_NAME__PRS) &&
+ !ACPI_COMPARE_NAME(name, METHOD_NAME__AEI))) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Get the _CRS/_PRS/_AEI resource list */
+
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ status = acpi_rs_get_method_data(device_handle, name, &buffer);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Walk the resource list and cleanup */
+
+ status = acpi_walk_resource_buffer(&buffer, user_function, context);
ACPI_FREE(buffer.pointer);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 3906518..74181bf 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -172,6 +172,7 @@
* FUNCTION: acpi_tb_init_generic_address
*
* PARAMETERS: generic_address - GAS struct to be initialized
+ * space_id - ACPI Space ID for this register
* byte_width - Width of this register
* address - Address of the register
*
@@ -407,8 +408,8 @@
* should be zero are indeed zero. This will workaround BIOSs that
* inadvertently place values in these fields.
*
- * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
- * offset 45, 55, 95, and the word located at offset 109, 110.
+ * The ACPI 1.0 reserved fields that will be zeroed are the bytes located
+ * at offset 45, 55, 95, and the word located at offset 109, 110.
*
* Note: The FADT revision value is unreliable. Only the length can be
* trusted.
diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c
index 77d1db2..e4f4f02 100644
--- a/drivers/acpi/acpica/tbfind.c
+++ b/drivers/acpi/acpica/tbfind.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index f540ae4..e57cd38 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 285e24b..ce3d5db 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -147,7 +147,7 @@
ACPI_CAST_INDIRECT_PTR(struct
acpi_table_header,
&acpi_gbl_FACS));
- return status;
+ return (status);
}
#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index f5632780..b35a5e6 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,7 +44,6 @@
#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
-#include "acnamesp.h"
#include "actables.h"
#define _COMPONENT ACPI_TABLES
@@ -437,7 +436,7 @@
*
******************************************************************************/
acpi_status
-acpi_install_table_handler(acpi_tbl_handler handler, void *context)
+acpi_install_table_handler(acpi_table_handler handler, void *context)
{
acpi_status status;
@@ -483,7 +482,7 @@
* DESCRIPTION: Remove table event handler
*
******************************************************************************/
-acpi_status acpi_remove_table_handler(acpi_tbl_handler handler)
+acpi_status acpi_remove_table_handler(acpi_table_handler handler)
{
acpi_status status;
diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c
index a5e1e4e..67e046e 100644
--- a/drivers/acpi/acpica/tbxfload.c
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -192,7 +192,7 @@
(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
+ ACPI_INFO((AE_INFO, "All ACPI Tables successfully acquired"));
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 28f3302..7c2ecfb 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c
index 6488030..698b9d3 100644
--- a/drivers/acpi/acpica/utaddress.c
+++ b/drivers/acpi/acpica/utaddress.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -214,7 +214,7 @@
if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
(space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
- return_UINT32(0);
+ return_VALUE(0);
}
range_info = acpi_gbl_address_range_list[space_id];
@@ -256,7 +256,7 @@
range_info = range_info->next;
}
- return_UINT32(overlap_count);
+ return_VALUE(overlap_count);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c
index ed29d47..e0ffb58 100644
--- a/drivers/acpi/acpica/utalloc.c
+++ b/drivers/acpi/acpica/utalloc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utcache.c b/drivers/acpi/acpica/utcache.c
index e1d40ed..e0e8579 100644
--- a/drivers/acpi/acpica/utcache.c
+++ b/drivers/acpi/acpica/utcache.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index 294692a..e4c9291 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -785,7 +785,7 @@
status = acpi_os_create_mutex(&dest_desc->mutex.os_mutex);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
break;
@@ -795,7 +795,7 @@
&dest_desc->event.
os_semaphore);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
break;
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 5d95166..c57d9cc 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -166,11 +166,9 @@
acpi_thread_id thread_id;
va_list args;
- /*
- * Stay silent if the debug level or component ID is disabled
- */
- if (!(requested_debug_level & acpi_dbg_level) ||
- !(component_id & acpi_dbg_layer)) {
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(requested_debug_level, component_id)) {
return;
}
@@ -236,8 +234,9 @@
{
va_list args;
- if (!(requested_debug_level & acpi_dbg_level) ||
- !(component_id & acpi_dbg_layer)) {
+ /* Check if debug output enabled */
+
+ if (!ACPI_IS_DEBUG_ENABLED(requested_debug_level, component_id)) {
return;
}
@@ -272,9 +271,13 @@
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s\n", acpi_gbl_fn_entry_str);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s\n", acpi_gbl_fn_entry_str);
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_trace)
@@ -304,9 +307,14 @@
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s %p\n", acpi_gbl_fn_entry_str, pointer);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s %p\n", acpi_gbl_fn_entry_str,
+ pointer);
+ }
}
/*******************************************************************************
@@ -335,9 +343,14 @@
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s %s\n", acpi_gbl_fn_entry_str, string);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s %s\n", acpi_gbl_fn_entry_str,
+ string);
+ }
}
/*******************************************************************************
@@ -366,9 +379,14 @@
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s %08X\n", acpi_gbl_fn_entry_str, integer);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s %08X\n",
+ acpi_gbl_fn_entry_str, integer);
+ }
}
/*******************************************************************************
@@ -393,9 +411,13 @@
const char *module_name, u32 component_id)
{
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s\n", acpi_gbl_fn_exit_str);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s\n", acpi_gbl_fn_exit_str);
+ }
acpi_gbl_nesting_level--;
}
@@ -425,17 +447,23 @@
u32 component_id, acpi_status status)
{
- if (ACPI_SUCCESS(status)) {
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name,
- component_id, "%s %s\n", acpi_gbl_fn_exit_str,
- acpi_format_exception(status));
- } else {
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name,
- component_id, "%s ****Exception****: %s\n",
- acpi_gbl_fn_exit_str,
- acpi_format_exception(status));
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ if (ACPI_SUCCESS(status)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name,
+ module_name, component_id, "%s %s\n",
+ acpi_gbl_fn_exit_str,
+ acpi_format_exception(status));
+ } else {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name,
+ module_name, component_id,
+ "%s ****Exception****: %s\n",
+ acpi_gbl_fn_exit_str,
+ acpi_format_exception(status));
+ }
}
acpi_gbl_nesting_level--;
@@ -465,10 +493,15 @@
const char *module_name, u32 component_id, u64 value)
{
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s %8.8X%8.8X\n", acpi_gbl_fn_exit_str,
- ACPI_FORMAT_UINT64(value));
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s %8.8X%8.8X\n",
+ acpi_gbl_fn_exit_str,
+ ACPI_FORMAT_UINT64(value));
+ }
acpi_gbl_nesting_level--;
}
@@ -497,9 +530,14 @@
const char *module_name, u32 component_id, u8 *ptr)
{
- acpi_debug_print(ACPI_LV_FUNCTIONS,
- line_number, function_name, module_name, component_id,
- "%s %p\n", acpi_gbl_fn_exit_str, ptr);
+ /* Check if enabled up-front for performance */
+
+ if (ACPI_IS_DEBUG_ENABLED(ACPI_LV_FUNCTIONS, component_id)) {
+ acpi_debug_print(ACPI_LV_FUNCTIONS,
+ line_number, function_name, module_name,
+ component_id, "%s %p\n", acpi_gbl_fn_exit_str,
+ ptr);
+ }
acpi_gbl_nesting_level--;
}
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index 60a1584..11e2e02 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 7981054..2541de4 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -340,7 +340,7 @@
{
union acpi_operand_object **internal_obj;
- ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
+ ACPI_FUNCTION_ENTRY();
/* Walk the null-terminated internal list */
@@ -351,7 +351,7 @@
/* Free the combined parameter pointer list and object array */
ACPI_FREE(obj_list);
- return_VOID;
+ return;
}
/*******************************************************************************
@@ -484,7 +484,7 @@
union acpi_generic_state *state;
u32 i;
- ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
+ ACPI_FUNCTION_NAME(ut_update_object_reference);
while (object) {
@@ -493,7 +493,7 @@
if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
"Object %p is NS handle\n", object));
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
}
/*
@@ -530,18 +530,42 @@
*/
for (i = 0; i < object->package.count; i++) {
/*
- * Push each element onto the stack for later processing.
- * Note: There can be null elements within the package,
- * these are simply ignored
+ * Null package elements are legal and can be simply
+ * ignored.
*/
- status =
- acpi_ut_create_update_state_and_push
- (object->package.elements[i], action,
- &state_list);
- if (ACPI_FAILURE(status)) {
- goto error_exit;
+ next_object = object->package.elements[i];
+ if (!next_object) {
+ continue;
+ }
+
+ switch (next_object->common.type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_BUFFER:
+ /*
+ * For these very simple sub-objects, we can just
+ * update the reference count here and continue.
+ * Greatly increases performance of this operation.
+ */
+ acpi_ut_update_ref_count(next_object,
+ action);
+ break;
+
+ default:
+ /*
+ * For complex sub-objects, push them onto the stack
+ * for later processing (this eliminates recursion.)
+ */
+ status =
+ acpi_ut_create_update_state_and_push
+ (next_object, action, &state_list);
+ if (ACPI_FAILURE(status)) {
+ goto error_exit;
+ }
+ break;
}
}
+ next_object = NULL;
break;
case ACPI_TYPE_BUFFER_FIELD:
@@ -619,7 +643,7 @@
}
}
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
error_exit:
@@ -633,7 +657,7 @@
acpi_ut_delete_generic_state(state);
}
- return_ACPI_STATUS(status);
+ return (status);
}
/*******************************************************************************
@@ -652,12 +676,12 @@
void acpi_ut_add_reference(union acpi_operand_object *object)
{
- ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
+ ACPI_FUNCTION_NAME(ut_add_reference);
/* Ensure that we have a valid object */
if (!acpi_ut_valid_internal_object(object)) {
- return_VOID;
+ return;
}
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
@@ -667,7 +691,7 @@
/* Increment the reference count */
(void)acpi_ut_update_object_reference(object, REF_INCREMENT);
- return_VOID;
+ return;
}
/*******************************************************************************
@@ -685,7 +709,7 @@
void acpi_ut_remove_reference(union acpi_operand_object *object)
{
- ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
+ ACPI_FUNCTION_NAME(ut_remove_reference);
/*
* Allow a NULL pointer to be passed in, just ignore it. This saves
@@ -694,13 +718,13 @@
*/
if (!object ||
(ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
- return_VOID;
+ return;
}
/* Ensure that we have a valid object */
if (!acpi_ut_valid_internal_object(object)) {
- return_VOID;
+ return;
}
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
@@ -713,5 +737,5 @@
* of all subobjects!)
*/
(void)acpi_ut_update_object_reference(object, REF_DECREMENT);
- return_VOID;
+ return;
}
diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c
index a9c65fb..c3f3a7e 100644
--- a/drivers/acpi/acpica/uteval.c
+++ b/drivers/acpi/acpica/uteval.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -68,7 +68,7 @@
******************************************************************************/
acpi_status
-acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
+acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node,
char *path,
u32 expected_return_btypes,
union acpi_operand_object **return_desc)
diff --git a/drivers/acpi/acpica/utexcep.c b/drivers/acpi/acpica/utexcep.c
index 23b9894..a0ab7c0 100644
--- a/drivers/acpi/acpica/utexcep.c
+++ b/drivers/acpi/acpica/utexcep.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index ed18931..ffecf4b 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -293,11 +293,11 @@
/* GPE support */
+ acpi_gbl_all_gpes_initialized = FALSE;
acpi_gbl_gpe_xrupt_list_head = NULL;
acpi_gbl_gpe_fadt_blocks[0] = NULL;
acpi_gbl_gpe_fadt_blocks[1] = NULL;
acpi_current_gpe_count = 0;
- acpi_gbl_all_gpes_initialized = FALSE;
acpi_gbl_global_event_handler = NULL;
@@ -357,17 +357,24 @@
acpi_gbl_root_node_struct.peer = NULL;
acpi_gbl_root_node_struct.object = NULL;
+#ifdef ACPI_DISASSEMBLER
+ acpi_gbl_external_list = NULL;
+#endif
+
#ifdef ACPI_DEBUG_OUTPUT
acpi_gbl_lowest_stack_pointer = ACPI_CAST_PTR(acpi_size, ACPI_SIZE_MAX);
#endif
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
acpi_gbl_display_final_mem_stats = FALSE;
+ acpi_gbl_disable_mem_tracking = FALSE;
#endif
return_ACPI_STATUS(AE_OK);
}
+/* Public globals */
+
ACPI_EXPORT_SYMBOL(acpi_gbl_FADT)
ACPI_EXPORT_SYMBOL(acpi_dbg_level)
ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c
index 774c3ae..43a170a 100644
--- a/drivers/acpi/acpica/utids.c
+++ b/drivers/acpi/acpica/utids.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c
index 246798e..c5d1ac4 100644
--- a/drivers/acpi/acpica/utinit.c
+++ b/drivers/acpi/acpica/utinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c
index b1eb7f1..5c26ad4 100644
--- a/drivers/acpi/acpica/utlock.c
+++ b/drivers/acpi/acpica/utlock.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -66,11 +66,11 @@
lock->num_readers = 0;
status = acpi_os_create_mutex(&lock->reader_mutex);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
status = acpi_os_create_mutex(&lock->writer_mutex);
- return status;
+ return (status);
}
void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock)
@@ -108,7 +108,7 @@
status = acpi_os_acquire_mutex(lock->reader_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
/* Acquire the write lock only for the first reader */
@@ -121,7 +121,7 @@
}
acpi_os_release_mutex(lock->reader_mutex);
- return status;
+ return (status);
}
acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock)
@@ -130,7 +130,7 @@
status = acpi_os_acquire_mutex(lock->reader_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
- return status;
+ return (status);
}
/* Release the write lock only for the very last reader */
@@ -141,7 +141,7 @@
}
acpi_os_release_mutex(lock->reader_mutex);
- return status;
+ return (status);
}
/*******************************************************************************
@@ -165,7 +165,7 @@
acpi_status status;
status = acpi_os_acquire_mutex(lock->writer_mutex, ACPI_WAIT_FOREVER);
- return status;
+ return (status);
}
void acpi_ut_release_write_lock(struct acpi_rw_lock *lock)
diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c
index 4956367..909fe66 100644
--- a/drivers/acpi/acpica/utmath.c
+++ b/drivers/acpi/acpica/utmath.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 9286a69..785fdd0 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -48,36 +48,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
-#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
-/*******************************************************************************
- *
- * FUNCTION: ut_convert_backslashes
- *
- * PARAMETERS: pathname - File pathname string to be converted
- *
- * RETURN: Modifies the input Pathname
- *
- * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
- * the entire input file pathname string.
- *
- ******************************************************************************/
-void ut_convert_backslashes(char *pathname)
-{
-
- if (!pathname) {
- return;
- }
-
- while (*pathname) {
- if (*pathname == '\\') {
- *pathname = '/';
- }
-
- pathname++;
- }
-}
-#endif
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_pci_root_bridge
@@ -89,7 +59,6 @@
* DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
*
******************************************************************************/
-
u8 acpi_ut_is_pci_root_bridge(char *id)
{
@@ -136,362 +105,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ut_allocate_owner_id
- *
- * PARAMETERS: owner_id - Where the new owner ID is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
- * track objects created by the table or method, to be deleted
- * when the method exits or the table is unloaded.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
-{
- u32 i;
- u32 j;
- u32 k;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
-
- /* Guard against multiple allocations of ID to the same location */
-
- if (*owner_id) {
- ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
- *owner_id));
- return_ACPI_STATUS(AE_ALREADY_EXISTS);
- }
-
- /* Mutex for the global ID mask */
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * Find a free owner ID, cycle through all possible IDs on repeated
- * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
- * to be scanned twice.
- */
- for (i = 0, j = acpi_gbl_last_owner_id_index;
- i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
- if (j >= ACPI_NUM_OWNERID_MASKS) {
- j = 0; /* Wraparound to start of mask array */
- }
-
- for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
- if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
-
- /* There are no free IDs in this mask */
-
- break;
- }
-
- if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
- /*
- * Found a free ID. The actual ID is the bit index plus one,
- * making zero an invalid Owner ID. Save this as the last ID
- * allocated and update the global ID mask.
- */
- acpi_gbl_owner_id_mask[j] |= (1 << k);
-
- acpi_gbl_last_owner_id_index = (u8)j;
- acpi_gbl_next_owner_id_offset = (u8)(k + 1);
-
- /*
- * Construct encoded ID from the index and bit position
- *
- * Note: Last [j].k (bit 255) is never used and is marked
- * permanently allocated (prevents +1 overflow)
- */
- *owner_id =
- (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
-
- ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
- "Allocated OwnerId: %2.2X\n",
- (unsigned int)*owner_id));
- goto exit;
- }
- }
-
- acpi_gbl_next_owner_id_offset = 0;
- }
-
- /*
- * All owner_ids have been allocated. This typically should
- * not happen since the IDs are reused after deallocation. The IDs are
- * allocated upon table load (one per table) and method execution, and
- * they are released when a table is unloaded or a method completes
- * execution.
- *
- * If this error happens, there may be very deep nesting of invoked control
- * methods, or there may be a bug where the IDs are not released.
- */
- status = AE_OWNER_ID_LIMIT;
- ACPI_ERROR((AE_INFO,
- "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
-
- exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_release_owner_id
- *
- * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID
- *
- * RETURN: None. No error is returned because we are either exiting a
- * control method or unloading a table. Either way, we would
- * ignore any error anyway.
- *
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
- *
- ******************************************************************************/
-
-void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
-{
- acpi_owner_id owner_id = *owner_id_ptr;
- acpi_status status;
- u32 index;
- u32 bit;
-
- ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
-
- /* Always clear the input owner_id (zero is an invalid ID) */
-
- *owner_id_ptr = 0;
-
- /* Zero is not a valid owner_ID */
-
- if (owner_id == 0) {
- ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
- return_VOID;
- }
-
- /* Mutex for the global ID mask */
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
- if (ACPI_FAILURE(status)) {
- return_VOID;
- }
-
- /* Normalize the ID to zero */
-
- owner_id--;
-
- /* Decode ID to index/offset pair */
-
- index = ACPI_DIV_32(owner_id);
- bit = 1 << ACPI_MOD_32(owner_id);
-
- /* Free the owner ID only if it is valid */
-
- if (acpi_gbl_owner_id_mask[index] & bit) {
- acpi_gbl_owner_id_mask[index] ^= bit;
- } else {
- ACPI_ERROR((AE_INFO,
- "Release of non-allocated OwnerId: 0x%2.2X",
- owner_id + 1));
- }
-
- (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
- return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_strupr (strupr)
- *
- * PARAMETERS: src_string - The source string to convert
- *
- * RETURN: None
- *
- * DESCRIPTION: Convert string to uppercase
- *
- * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
- *
- ******************************************************************************/
-
-void acpi_ut_strupr(char *src_string)
-{
- char *string;
-
- ACPI_FUNCTION_ENTRY();
-
- if (!src_string) {
- return;
- }
-
- /* Walk entire string, uppercasing the letters */
-
- for (string = src_string; *string; string++) {
- *string = (char)ACPI_TOUPPER(*string);
- }
-
- return;
-}
-
-#ifdef ACPI_ASL_COMPILER
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_strlwr (strlwr)
- *
- * PARAMETERS: src_string - The source string to convert
- *
- * RETURN: None
- *
- * DESCRIPTION: Convert string to lowercase
- *
- * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
- *
- ******************************************************************************/
-
-void acpi_ut_strlwr(char *src_string)
-{
- char *string;
-
- ACPI_FUNCTION_ENTRY();
-
- if (!src_string) {
- return;
- }
-
- /* Walk entire string, lowercasing the letters */
-
- for (string = src_string; *string; string++) {
- *string = (char)ACPI_TOLOWER(*string);
- }
-
- return;
-}
-
-/******************************************************************************
- *
- * FUNCTION: acpi_ut_stricmp
- *
- * PARAMETERS: string1 - first string to compare
- * string2 - second string to compare
- *
- * RETURN: int that signifies string relationship. Zero means strings
- * are equal.
- *
- * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
- * strings with no case sensitivity)
- *
- ******************************************************************************/
-
-int acpi_ut_stricmp(char *string1, char *string2)
-{
- int c1;
- int c2;
-
- do {
- c1 = tolower((int)*string1);
- c2 = tolower((int)*string2);
-
- string1++;
- string2++;
- }
- while ((c1 == c2) && (c1));
-
- return (c1 - c2);
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_print_string
- *
- * PARAMETERS: string - Null terminated ASCII string
- * max_length - Maximum output length
- *
- * RETURN: None
- *
- * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
- * sequences.
- *
- ******************************************************************************/
-
-void acpi_ut_print_string(char *string, u8 max_length)
-{
- u32 i;
-
- if (!string) {
- acpi_os_printf("<\"NULL STRING PTR\">");
- return;
- }
-
- acpi_os_printf("\"");
- for (i = 0; string[i] && (i < max_length); i++) {
-
- /* Escape sequences */
-
- switch (string[i]) {
- case 0x07:
- acpi_os_printf("\\a"); /* BELL */
- break;
-
- case 0x08:
- acpi_os_printf("\\b"); /* BACKSPACE */
- break;
-
- case 0x0C:
- acpi_os_printf("\\f"); /* FORMFEED */
- break;
-
- case 0x0A:
- acpi_os_printf("\\n"); /* LINEFEED */
- break;
-
- case 0x0D:
- acpi_os_printf("\\r"); /* CARRIAGE RETURN */
- break;
-
- case 0x09:
- acpi_os_printf("\\t"); /* HORIZONTAL TAB */
- break;
-
- case 0x0B:
- acpi_os_printf("\\v"); /* VERTICAL TAB */
- break;
-
- case '\'': /* Single Quote */
- case '\"': /* Double Quote */
- case '\\': /* Backslash */
- acpi_os_printf("\\%c", (int)string[i]);
- break;
-
- default:
-
- /* Check for printable character or hex escape */
-
- if (ACPI_IS_PRINT(string[i])) {
- /* This is a normal character */
-
- acpi_os_printf("%c", (int)string[i]);
- } else {
- /* All others will be Hex escapes */
-
- acpi_os_printf("\\x%2.2X", (s32) string[i]);
- }
- break;
- }
- }
- acpi_os_printf("\"");
-
- if (i == max_length && string[i]) {
- acpi_os_printf("...");
- }
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ut_dword_byte_swap
*
* PARAMETERS: value - Value to be converted
@@ -559,379 +172,6 @@
}
}
-#ifdef ACPI_DEBUG_OUTPUT
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_display_init_pathname
- *
- * PARAMETERS: type - Object type of the node
- * obj_handle - Handle whose pathname will be displayed
- * path - Additional path string to be appended.
- * (NULL if no extra path)
- *
- * RETURN: acpi_status
- *
- * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
- *
- ******************************************************************************/
-
-void
-acpi_ut_display_init_pathname(u8 type,
- struct acpi_namespace_node *obj_handle,
- char *path)
-{
- acpi_status status;
- struct acpi_buffer buffer;
-
- ACPI_FUNCTION_ENTRY();
-
- /* Only print the path if the appropriate debug level is enabled */
-
- if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
- return;
- }
-
- /* Get the full pathname to the node */
-
- buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
- if (ACPI_FAILURE(status)) {
- return;
- }
-
- /* Print what we're doing */
-
- switch (type) {
- case ACPI_TYPE_METHOD:
- acpi_os_printf("Executing ");
- break;
-
- default:
- acpi_os_printf("Initializing ");
- break;
- }
-
- /* Print the object type and pathname */
-
- acpi_os_printf("%-12s %s",
- acpi_ut_get_type_name(type), (char *)buffer.pointer);
-
- /* Extra path is used to append names like _STA, _INI, etc. */
-
- if (path) {
- acpi_os_printf(".%s", path);
- }
- acpi_os_printf("\n");
-
- ACPI_FREE(buffer.pointer);
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_valid_acpi_char
- *
- * PARAMETERS: char - The character to be examined
- * position - Byte position (0-3)
- *
- * RETURN: TRUE if the character is valid, FALSE otherwise
- *
- * DESCRIPTION: Check for a valid ACPI character. Must be one of:
- * 1) Upper case alpha
- * 2) numeric
- * 3) underscore
- *
- * We allow a '!' as the last character because of the ASF! table
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_acpi_char(char character, u32 position)
-{
-
- if (!((character >= 'A' && character <= 'Z') ||
- (character >= '0' && character <= '9') || (character == '_'))) {
-
- /* Allow a '!' in the last position */
-
- if (character == '!' && position == 3) {
- return (TRUE);
- }
-
- return (FALSE);
- }
-
- return (TRUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_valid_acpi_name
- *
- * PARAMETERS: name - The name to be examined
- *
- * RETURN: TRUE if the name is valid, FALSE otherwise
- *
- * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
- * 1) Upper case alpha
- * 2) numeric
- * 3) underscore
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_acpi_name(u32 name)
-{
- u32 i;
-
- ACPI_FUNCTION_ENTRY();
-
- for (i = 0; i < ACPI_NAME_SIZE; i++) {
- if (!acpi_ut_valid_acpi_char
- ((ACPI_CAST_PTR(char, &name))[i], i)) {
- return (FALSE);
- }
- }
-
- return (TRUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_repair_name
- *
- * PARAMETERS: name - The ACPI name to be repaired
- *
- * RETURN: Repaired version of the name
- *
- * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- * return the new name. NOTE: the Name parameter must reside in
- * read/write memory, cannot be a const.
- *
- * An ACPI Name must consist of valid ACPI characters. We will repair the name
- * if necessary because we don't want to abort because of this, but we want
- * all namespace names to be printable. A warning message is appropriate.
- *
- * This issue came up because there are in fact machines that exhibit
- * this problem, and we want to be able to enable ACPI support for them,
- * even though there are a few bad names.
- *
- ******************************************************************************/
-
-void acpi_ut_repair_name(char *name)
-{
- u32 i;
- u8 found_bad_char = FALSE;
- u32 original_name;
-
- ACPI_FUNCTION_NAME(ut_repair_name);
-
- ACPI_MOVE_NAME(&original_name, name);
-
- /* Check each character in the name */
-
- for (i = 0; i < ACPI_NAME_SIZE; i++) {
- if (acpi_ut_valid_acpi_char(name[i], i)) {
- continue;
- }
-
- /*
- * Replace a bad character with something printable, yet technically
- * still invalid. This prevents any collisions with existing "good"
- * names in the namespace.
- */
- name[i] = '*';
- found_bad_char = TRUE;
- }
-
- if (found_bad_char) {
-
- /* Report warning only if in strict mode or debug mode */
-
- if (!acpi_gbl_enable_interpreter_slack) {
- ACPI_WARNING((AE_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- name));
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- name));
- }
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_strtoul64
- *
- * PARAMETERS: string - Null terminated string
- * base - Radix of the string: 16 or ACPI_ANY_BASE;
- * ACPI_ANY_BASE means 'in behalf of to_integer'
- * ret_integer - Where the converted integer is returned
- *
- * RETURN: Status and Converted value
- *
- * DESCRIPTION: Convert a string into an unsigned value. Performs either a
- * 32-bit or 64-bit conversion, depending on the current mode
- * of the interpreter.
- * NOTE: Does not support Octal strings, not needed.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
-{
- u32 this_digit = 0;
- u64 return_value = 0;
- u64 quotient;
- u64 dividend;
- u32 to_integer_op = (base == ACPI_ANY_BASE);
- u32 mode32 = (acpi_gbl_integer_byte_width == 4);
- u8 valid_digits = 0;
- u8 sign_of0x = 0;
- u8 term = 0;
-
- ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
-
- switch (base) {
- case ACPI_ANY_BASE:
- case 16:
- break;
-
- default:
- /* Invalid Base */
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- if (!string) {
- goto error_exit;
- }
-
- /* Skip over any white space in the buffer */
-
- while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
- string++;
- }
-
- if (to_integer_op) {
- /*
- * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
- * We need to determine if it is decimal or hexadecimal.
- */
- if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
- sign_of0x = 1;
- base = 16;
-
- /* Skip over the leading '0x' */
- string += 2;
- } else {
- base = 10;
- }
- }
-
- /* Any string left? Check that '0x' is not followed by white space. */
-
- if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
- if (to_integer_op) {
- goto error_exit;
- } else {
- goto all_done;
- }
- }
-
- /*
- * Perform a 32-bit or 64-bit conversion, depending upon the current
- * execution mode of the interpreter
- */
- dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
-
- /* Main loop: convert the string to a 32- or 64-bit integer */
-
- while (*string) {
- if (ACPI_IS_DIGIT(*string)) {
-
- /* Convert ASCII 0-9 to Decimal value */
-
- this_digit = ((u8)*string) - '0';
- } else if (base == 10) {
-
- /* Digit is out of range; possible in to_integer case only */
-
- term = 1;
- } else {
- this_digit = (u8)ACPI_TOUPPER(*string);
- if (ACPI_IS_XDIGIT((char)this_digit)) {
-
- /* Convert ASCII Hex char to value */
-
- this_digit = this_digit - 'A' + 10;
- } else {
- term = 1;
- }
- }
-
- if (term) {
- if (to_integer_op) {
- goto error_exit;
- } else {
- break;
- }
- } else if ((valid_digits == 0) && (this_digit == 0)
- && !sign_of0x) {
-
- /* Skip zeros */
- string++;
- continue;
- }
-
- valid_digits++;
-
- if (sign_of0x
- && ((valid_digits > 16)
- || ((valid_digits > 8) && mode32))) {
- /*
- * This is to_integer operation case.
- * No any restrictions for string-to-integer conversion,
- * see ACPI spec.
- */
- goto error_exit;
- }
-
- /* Divide the digit into the correct position */
-
- (void)acpi_ut_short_divide((dividend - (u64)this_digit),
- base, "ient, NULL);
-
- if (return_value > quotient) {
- if (to_integer_op) {
- goto error_exit;
- } else {
- break;
- }
- }
-
- return_value *= base;
- return_value += this_digit;
- string++;
- }
-
- /* All done, normal exit */
-
- all_done:
-
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(return_value)));
-
- *ret_integer = return_value;
- return_ACPI_STATUS(AE_OK);
-
- error_exit:
- /* Base was set/validated above */
-
- if (base == 10) {
- return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
- } else {
- return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
- }
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_create_update_state_and_push
@@ -1097,3 +337,71 @@
return_ACPI_STATUS(AE_AML_INTERNAL);
}
+
+#ifdef ACPI_DEBUG_OUTPUT
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_display_init_pathname
+ *
+ * PARAMETERS: type - Object type of the node
+ * obj_handle - Handle whose pathname will be displayed
+ * path - Additional path string to be appended.
+ * (NULL if no extra path)
+ *
+ * RETURN: acpi_status
+ *
+ * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_display_init_pathname(u8 type,
+ struct acpi_namespace_node *obj_handle,
+ char *path)
+{
+ acpi_status status;
+ struct acpi_buffer buffer;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Only print the path if the appropriate debug level is enabled */
+
+ if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+ return;
+ }
+
+ /* Get the full pathname to the node */
+
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
+ if (ACPI_FAILURE(status)) {
+ return;
+ }
+
+ /* Print what we're doing */
+
+ switch (type) {
+ case ACPI_TYPE_METHOD:
+ acpi_os_printf("Executing ");
+ break;
+
+ default:
+ acpi_os_printf("Initializing ");
+ break;
+ }
+
+ /* Print the object type and pathname */
+
+ acpi_os_printf("%-12s %s",
+ acpi_ut_get_type_name(type), (char *)buffer.pointer);
+
+ /* Extra path is used to append names like _STA, _INI, etc. */
+
+ if (path) {
+ acpi_os_printf(".%s", path);
+ }
+ acpi_os_printf("\n");
+
+ ACPI_FREE(buffer.pointer);
+}
+#endif
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 5ccf57c..22feb99 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 5c52ca7..1099f5c 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -419,7 +419,7 @@
{
ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
- /* Object must be a union acpi_operand_object */
+ /* Object must be of type union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
ACPI_ERROR((AE_INFO,
diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c
index 676285d..36a7d36 100644
--- a/drivers/acpi/acpica/utosi.c
+++ b/drivers/acpi/acpica/utosi.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utownerid.c b/drivers/acpi/acpica/utownerid.c
new file mode 100644
index 0000000..835340b
--- /dev/null
+++ b/drivers/acpi/acpica/utownerid.c
@@ -0,0 +1,218 @@
+/*******************************************************************************
+ *
+ * Module Name: utownerid - Support for Table/Method Owner IDs
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utownerid")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_owner_id
+ *
+ * PARAMETERS: owner_id - Where the new owner ID is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
+ * track objects created by the table or method, to be deleted
+ * when the method exits or the table is unloaded.
+ *
+ ******************************************************************************/
+acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
+{
+ u32 i;
+ u32 j;
+ u32 k;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
+
+ /* Guard against multiple allocations of ID to the same location */
+
+ if (*owner_id) {
+ ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
+ *owner_id));
+ return_ACPI_STATUS(AE_ALREADY_EXISTS);
+ }
+
+ /* Mutex for the global ID mask */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Find a free owner ID, cycle through all possible IDs on repeated
+ * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
+ * to be scanned twice.
+ */
+ for (i = 0, j = acpi_gbl_last_owner_id_index;
+ i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
+ if (j >= ACPI_NUM_OWNERID_MASKS) {
+ j = 0; /* Wraparound to start of mask array */
+ }
+
+ for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
+ if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
+
+ /* There are no free IDs in this mask */
+
+ break;
+ }
+
+ if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
+ /*
+ * Found a free ID. The actual ID is the bit index plus one,
+ * making zero an invalid Owner ID. Save this as the last ID
+ * allocated and update the global ID mask.
+ */
+ acpi_gbl_owner_id_mask[j] |= (1 << k);
+
+ acpi_gbl_last_owner_id_index = (u8)j;
+ acpi_gbl_next_owner_id_offset = (u8)(k + 1);
+
+ /*
+ * Construct encoded ID from the index and bit position
+ *
+ * Note: Last [j].k (bit 255) is never used and is marked
+ * permanently allocated (prevents +1 overflow)
+ */
+ *owner_id =
+ (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
+ "Allocated OwnerId: %2.2X\n",
+ (unsigned int)*owner_id));
+ goto exit;
+ }
+ }
+
+ acpi_gbl_next_owner_id_offset = 0;
+ }
+
+ /*
+ * All owner_ids have been allocated. This typically should
+ * not happen since the IDs are reused after deallocation. The IDs are
+ * allocated upon table load (one per table) and method execution, and
+ * they are released when a table is unloaded or a method completes
+ * execution.
+ *
+ * If this error happens, there may be very deep nesting of invoked control
+ * methods, or there may be a bug where the IDs are not released.
+ */
+ status = AE_OWNER_ID_LIMIT;
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
+
+ exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_release_owner_id
+ *
+ * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID
+ *
+ * RETURN: None. No error is returned because we are either exiting a
+ * control method or unloading a table. Either way, we would
+ * ignore any error anyway.
+ *
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ *
+ ******************************************************************************/
+
+void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
+{
+ acpi_owner_id owner_id = *owner_id_ptr;
+ acpi_status status;
+ u32 index;
+ u32 bit;
+
+ ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
+
+ /* Always clear the input owner_id (zero is an invalid ID) */
+
+ *owner_id_ptr = 0;
+
+ /* Zero is not a valid owner_ID */
+
+ if (owner_id == 0) {
+ ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
+ return_VOID;
+ }
+
+ /* Mutex for the global ID mask */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return_VOID;
+ }
+
+ /* Normalize the ID to zero */
+
+ owner_id--;
+
+ /* Decode ID to index/offset pair */
+
+ index = ACPI_DIV_32(owner_id);
+ bit = 1 << ACPI_MOD_32(owner_id);
+
+ /* Free the owner ID only if it is valid */
+
+ if (acpi_gbl_owner_id_mask[index] & bit) {
+ acpi_gbl_owner_id_mask[index] ^= bit;
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "Release of non-allocated OwnerId: 0x%2.2X",
+ owner_id + 1));
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return_VOID;
+}
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index e38bef4..cb7fa49 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -127,7 +127,9 @@
const char *acpi_gbl_shr_decode[] = {
"Exclusive",
- "Shared"
+ "Shared",
+ "ExclusiveAndWake", /* ACPI 5.0 */
+ "SharedAndWake" /* ACPI 5.0 */
};
const char *acpi_gbl_siz_decode[] = {
@@ -383,26 +385,16 @@
ACPI_VARIABLE_LENGTH /* 0E *serial_bus */
};
-/*
- * For the iASL compiler/disassembler, we don't want any error messages
- * because the disassembler uses the resource validation code to determine
- * if Buffer objects are actually Resource Templates.
- */
-#ifdef ACPI_ASL_COMPILER
-#define ACPI_RESOURCE_ERROR(plist)
-#else
-#define ACPI_RESOURCE_ERROR(plist) ACPI_ERROR(plist)
-#endif
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_walk_aml_resources
*
- * PARAMETERS: aml - Pointer to the raw AML resource template
- * aml_length - Length of the entire template
- * user_function - Called once for each descriptor found. If
- * NULL, a pointer to the end_tag is returned
- * context - Passed to user_function
+ * PARAMETERS: walk_state - Current walk info
+ * PARAMETERS: aml - Pointer to the raw AML resource template
+ * aml_length - Length of the entire template
+ * user_function - Called once for each descriptor found. If
+ * NULL, a pointer to the end_tag is returned
+ * context - Passed to user_function
*
* RETURN: Status
*
@@ -412,7 +404,8 @@
******************************************************************************/
acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
+acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state,
+ u8 *aml,
acpi_size aml_length,
acpi_walk_aml_callback user_function, void **context)
{
@@ -441,7 +434,8 @@
/* Validate the Resource Type and Resource Length */
- status = acpi_ut_validate_resource(aml, &resource_index);
+ status =
+ acpi_ut_validate_resource(walk_state, aml, &resource_index);
if (ACPI_FAILURE(status)) {
/*
* Exit on failure. Cannot continue because the descriptor length
@@ -498,7 +492,8 @@
/* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */
- (void)acpi_ut_validate_resource(end_tag, &resource_index);
+ (void)acpi_ut_validate_resource(walk_state, end_tag,
+ &resource_index);
status =
user_function(end_tag, 2, offset, resource_index, context);
if (ACPI_FAILURE(status)) {
@@ -513,9 +508,10 @@
*
* FUNCTION: acpi_ut_validate_resource
*
- * PARAMETERS: aml - Pointer to the raw AML resource descriptor
- * return_index - Where the resource index is returned. NULL
- * if the index is not required.
+ * PARAMETERS: walk_state - Current walk info
+ * aml - Pointer to the raw AML resource descriptor
+ * return_index - Where the resource index is returned. NULL
+ * if the index is not required.
*
* RETURN: Status, and optionally the Index into the global resource tables
*
@@ -525,7 +521,9 @@
*
******************************************************************************/
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
+acpi_status
+acpi_ut_validate_resource(struct acpi_walk_state *walk_state,
+ void *aml, u8 *return_index)
{
union aml_resource *aml_resource;
u8 resource_type;
@@ -627,10 +625,12 @@
if ((aml_resource->common_serial_bus.type == 0) ||
(aml_resource->common_serial_bus.type >
AML_RESOURCE_MAX_SERIALBUSTYPE)) {
- ACPI_RESOURCE_ERROR((AE_INFO,
- "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
- aml_resource->common_serial_bus.
- type));
+ if (walk_state) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
+ aml_resource->common_serial_bus.
+ type));
+ }
return (AE_AML_INVALID_RESOURCE_TYPE);
}
}
@@ -645,18 +645,22 @@
invalid_resource:
- ACPI_RESOURCE_ERROR((AE_INFO,
- "Invalid/unsupported resource descriptor: Type 0x%2.2X",
- resource_type));
+ if (walk_state) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid/unsupported resource descriptor: Type 0x%2.2X",
+ resource_type));
+ }
return (AE_AML_INVALID_RESOURCE_TYPE);
bad_resource_length:
- ACPI_RESOURCE_ERROR((AE_INFO,
- "Invalid resource descriptor length: Type "
- "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
- resource_type, resource_length,
- minimum_resource_length));
+ if (walk_state) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid resource descriptor length: Type "
+ "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
+ resource_type, resource_length,
+ minimum_resource_length));
+ }
return (AE_AML_BAD_RESOURCE_LENGTH);
}
@@ -800,8 +804,7 @@
******************************************************************************/
acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc,
- u8 ** end_tag)
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag)
{
acpi_status status;
@@ -816,7 +819,7 @@
/* Validate the template and get a pointer to the end_tag */
- status = acpi_ut_walk_aml_resources(obj_desc->buffer.pointer,
+ status = acpi_ut_walk_aml_resources(NULL, obj_desc->buffer.pointer,
obj_desc->buffer.length, NULL,
(void **)end_tag);
diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c
index cee0473..a6b729d 100644
--- a/drivers/acpi/acpica/utstate.c
+++ b/drivers/acpi/acpica/utstate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -97,14 +97,13 @@
acpi_ut_push_generic_state(union acpi_generic_state **list_head,
union acpi_generic_state *state)
{
- ACPI_FUNCTION_TRACE(ut_push_generic_state);
+ ACPI_FUNCTION_ENTRY();
/* Push the state object onto the front of the list (stack) */
state->common.next = *list_head;
*list_head = state;
-
- return_VOID;
+ return;
}
/*******************************************************************************
@@ -124,7 +123,7 @@
{
union acpi_generic_state *state;
- ACPI_FUNCTION_TRACE(ut_pop_generic_state);
+ ACPI_FUNCTION_ENTRY();
/* Remove the state object at the head of the list (stack) */
@@ -136,7 +135,7 @@
*list_head = state->common.next;
}
- return_PTR(state);
+ return (state);
}
/*******************************************************************************
@@ -186,13 +185,13 @@
{
union acpi_generic_state *state;
- ACPI_FUNCTION_TRACE(ut_create_thread_state);
+ ACPI_FUNCTION_ENTRY();
/* Create the generic state object */
state = acpi_ut_create_generic_state();
if (!state) {
- return_PTR(NULL);
+ return (NULL);
}
/* Init fields specific to the update struct */
@@ -207,7 +206,7 @@
state->thread.thread_id = (acpi_thread_id) 1;
}
- return_PTR((struct acpi_thread_state *)state);
+ return ((struct acpi_thread_state *)state);
}
/*******************************************************************************
@@ -230,13 +229,13 @@
{
union acpi_generic_state *state;
- ACPI_FUNCTION_TRACE_PTR(ut_create_update_state, object);
+ ACPI_FUNCTION_ENTRY();
/* Create the generic state object */
state = acpi_ut_create_generic_state();
if (!state) {
- return_PTR(NULL);
+ return (NULL);
}
/* Init fields specific to the update struct */
@@ -244,8 +243,7 @@
state->common.descriptor_type = ACPI_DESC_TYPE_STATE_UPDATE;
state->update.object = object;
state->update.value = action;
-
- return_PTR(state);
+ return (state);
}
/*******************************************************************************
@@ -267,13 +265,13 @@
{
union acpi_generic_state *state;
- ACPI_FUNCTION_TRACE_PTR(ut_create_pkg_state, internal_object);
+ ACPI_FUNCTION_ENTRY();
/* Create the generic state object */
state = acpi_ut_create_generic_state();
if (!state) {
- return_PTR(NULL);
+ return (NULL);
}
/* Init fields specific to the update struct */
@@ -283,8 +281,7 @@
state->pkg.dest_object = external_object;
state->pkg.index = index;
state->pkg.num_packages = 1;
-
- return_PTR(state);
+ return (state);
}
/*******************************************************************************
@@ -304,21 +301,20 @@
{
union acpi_generic_state *state;
- ACPI_FUNCTION_TRACE(ut_create_control_state);
+ ACPI_FUNCTION_ENTRY();
/* Create the generic state object */
state = acpi_ut_create_generic_state();
if (!state) {
- return_PTR(NULL);
+ return (NULL);
}
/* Init fields specific to the control struct */
state->common.descriptor_type = ACPI_DESC_TYPE_STATE_CONTROL;
state->common.state = ACPI_CONTROL_CONDITIONAL_EXECUTING;
-
- return_PTR(state);
+ return (state);
}
/*******************************************************************************
@@ -336,12 +332,12 @@
void acpi_ut_delete_generic_state(union acpi_generic_state *state)
{
- ACPI_FUNCTION_TRACE(ut_delete_generic_state);
+ ACPI_FUNCTION_ENTRY();
/* Ignore null state */
if (state) {
(void)acpi_os_release_object(acpi_gbl_state_cache, state);
}
- return_VOID;
+ return;
}
diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c
new file mode 100644
index 0000000..b3e36a8
--- /dev/null
+++ b/drivers/acpi/acpica/utstring.c
@@ -0,0 +1,574 @@
+/*******************************************************************************
+ *
+ * Module Name: utstring - Common functions for strings and characters
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utstring")
+
+/*
+ * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
+ * version of strtoul.
+ */
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+void acpi_ut_strlwr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, lowercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOLOWER(*string);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_stricmp (stricmp)
+ *
+ * PARAMETERS: string1 - first string to compare
+ * string2 - second string to compare
+ *
+ * RETURN: int that signifies string relationship. Zero means strings
+ * are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ * strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+ int c1;
+ int c2;
+
+ do {
+ c1 = tolower((int)*string1);
+ c2 = tolower((int)*string2);
+
+ string1++;
+ string2++;
+ }
+ while ((c1 == c2) && (c1));
+
+ return (c1 - c2);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strupr (strupr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to uppercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strupr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, uppercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOUPPER(*string);
+ }
+
+ return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul64
+ *
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * ACPI_ANY_BASE means 'in behalf of to_integer'
+ * ret_integer - Where the converted integer is returned
+ *
+ * RETURN: Status and Converted value
+ *
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ * 32-bit or 64-bit conversion, depending on the current mode
+ * of the interpreter.
+ * NOTE: Does not support Octal strings, not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
+{
+ u32 this_digit = 0;
+ u64 return_value = 0;
+ u64 quotient;
+ u64 dividend;
+ u32 to_integer_op = (base == ACPI_ANY_BASE);
+ u32 mode32 = (acpi_gbl_integer_byte_width == 4);
+ u8 valid_digits = 0;
+ u8 sign_of0x = 0;
+ u8 term = 0;
+
+ ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
+
+ switch (base) {
+ case ACPI_ANY_BASE:
+ case 16:
+ break;
+
+ default:
+ /* Invalid Base */
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ if (!string) {
+ goto error_exit;
+ }
+
+ /* Skip over any white space in the buffer */
+
+ while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
+ string++;
+ }
+
+ if (to_integer_op) {
+ /*
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
+ * We need to determine if it is decimal or hexadecimal.
+ */
+ if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
+ sign_of0x = 1;
+ base = 16;
+
+ /* Skip over the leading '0x' */
+ string += 2;
+ } else {
+ base = 10;
+ }
+ }
+
+ /* Any string left? Check that '0x' is not followed by white space. */
+
+ if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ goto all_done;
+ }
+ }
+
+ /*
+ * Perform a 32-bit or 64-bit conversion, depending upon the current
+ * execution mode of the interpreter
+ */
+ dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+
+ /* Main loop: convert the string to a 32- or 64-bit integer */
+
+ while (*string) {
+ if (ACPI_IS_DIGIT(*string)) {
+
+ /* Convert ASCII 0-9 to Decimal value */
+
+ this_digit = ((u8)*string) - '0';
+ } else if (base == 10) {
+
+ /* Digit is out of range; possible in to_integer case only */
+
+ term = 1;
+ } else {
+ this_digit = (u8)ACPI_TOUPPER(*string);
+ if (ACPI_IS_XDIGIT((char)this_digit)) {
+
+ /* Convert ASCII Hex char to value */
+
+ this_digit = this_digit - 'A' + 10;
+ } else {
+ term = 1;
+ }
+ }
+
+ if (term) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ } else if ((valid_digits == 0) && (this_digit == 0)
+ && !sign_of0x) {
+
+ /* Skip zeros */
+ string++;
+ continue;
+ }
+
+ valid_digits++;
+
+ if (sign_of0x
+ && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
+ /*
+ * This is to_integer operation case.
+ * No any restrictions for string-to-integer conversion,
+ * see ACPI spec.
+ */
+ goto error_exit;
+ }
+
+ /* Divide the digit into the correct position */
+
+ (void)acpi_ut_short_divide((dividend - (u64)this_digit),
+ base, "ient, NULL);
+
+ if (return_value > quotient) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ }
+
+ return_value *= base;
+ return_value += this_digit;
+ string++;
+ }
+
+ /* All done, normal exit */
+
+ all_done:
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(return_value)));
+
+ *ret_integer = return_value;
+ return_ACPI_STATUS(AE_OK);
+
+ error_exit:
+ /* Base was set/validated above */
+
+ if (base == 10) {
+ return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
+ } else {
+ return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_print_string
+ *
+ * PARAMETERS: string - Null terminated ASCII string
+ * max_length - Maximum output length
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
+ * sequences.
+ *
+ ******************************************************************************/
+
+void acpi_ut_print_string(char *string, u8 max_length)
+{
+ u32 i;
+
+ if (!string) {
+ acpi_os_printf("<\"NULL STRING PTR\">");
+ return;
+ }
+
+ acpi_os_printf("\"");
+ for (i = 0; string[i] && (i < max_length); i++) {
+
+ /* Escape sequences */
+
+ switch (string[i]) {
+ case 0x07:
+ acpi_os_printf("\\a"); /* BELL */
+ break;
+
+ case 0x08:
+ acpi_os_printf("\\b"); /* BACKSPACE */
+ break;
+
+ case 0x0C:
+ acpi_os_printf("\\f"); /* FORMFEED */
+ break;
+
+ case 0x0A:
+ acpi_os_printf("\\n"); /* LINEFEED */
+ break;
+
+ case 0x0D:
+ acpi_os_printf("\\r"); /* CARRIAGE RETURN */
+ break;
+
+ case 0x09:
+ acpi_os_printf("\\t"); /* HORIZONTAL TAB */
+ break;
+
+ case 0x0B:
+ acpi_os_printf("\\v"); /* VERTICAL TAB */
+ break;
+
+ case '\'': /* Single Quote */
+ case '\"': /* Double Quote */
+ case '\\': /* Backslash */
+ acpi_os_printf("\\%c", (int)string[i]);
+ break;
+
+ default:
+
+ /* Check for printable character or hex escape */
+
+ if (ACPI_IS_PRINT(string[i])) {
+ /* This is a normal character */
+
+ acpi_os_printf("%c", (int)string[i]);
+ } else {
+ /* All others will be Hex escapes */
+
+ acpi_os_printf("\\x%2.2X", (s32) string[i]);
+ }
+ break;
+ }
+ }
+ acpi_os_printf("\"");
+
+ if (i == max_length && string[i]) {
+ acpi_os_printf("...");
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_char
+ *
+ * PARAMETERS: char - The character to be examined
+ * position - Byte position (0-3)
+ *
+ * RETURN: TRUE if the character is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI character. Must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ * We allow a '!' as the last character because of the ASF! table
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_char(char character, u32 position)
+{
+
+ if (!((character >= 'A' && character <= 'Z') ||
+ (character >= '0' && character <= '9') || (character == '_'))) {
+
+ /* Allow a '!' in the last position */
+
+ if (character == '!' && position == 3) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_name
+ *
+ * PARAMETERS: name - The name to be examined
+ *
+ * RETURN: TRUE if the name is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_name(u32 name)
+{
+ u32 i;
+
+ ACPI_FUNCTION_ENTRY();
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ if (!acpi_ut_valid_acpi_char
+ ((ACPI_CAST_PTR(char, &name))[i], i)) {
+ return (FALSE);
+ }
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_repair_name
+ *
+ * PARAMETERS: name - The ACPI name to be repaired
+ *
+ * RETURN: Repaired version of the name
+ *
+ * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
+ * return the new name. NOTE: the Name parameter must reside in
+ * read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
+ *
+ ******************************************************************************/
+
+void acpi_ut_repair_name(char *name)
+{
+ u32 i;
+ u8 found_bad_char = FALSE;
+ u32 original_name;
+
+ ACPI_FUNCTION_NAME(ut_repair_name);
+
+ ACPI_MOVE_NAME(&original_name, name);
+
+ /* Check each character in the name */
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ if (acpi_ut_valid_acpi_char(name[i], i)) {
+ continue;
+ }
+
+ /*
+ * Replace a bad character with something printable, yet technically
+ * still invalid. This prevents any collisions with existing "good"
+ * names in the namespace.
+ */
+ name[i] = '*';
+ found_bad_char = TRUE;
+ }
+
+ if (found_bad_char) {
+
+ /* Report warning only if in strict mode or debug mode */
+
+ if (!acpi_gbl_enable_interpreter_slack) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+ original_name, name));
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+ original_name, name));
+ }
+ }
+}
+
+#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
+/*******************************************************************************
+ *
+ * FUNCTION: ut_convert_backslashes
+ *
+ * PARAMETERS: pathname - File pathname string to be converted
+ *
+ * RETURN: Modifies the input Pathname
+ *
+ * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
+ * the entire input file pathname string.
+ *
+ ******************************************************************************/
+
+void ut_convert_backslashes(char *pathname)
+{
+
+ if (!pathname) {
+ return;
+ }
+
+ while (*pathname) {
+ if (*pathname == '\\') {
+ *pathname = '/';
+ }
+
+ pathname++;
+ }
+}
+#endif
diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c
index a424a9e..62774c7 100644
--- a/drivers/acpi/acpica/uttrack.c
+++ b/drivers/acpi/acpica/uttrack.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -436,10 +436,10 @@
struct acpi_memory_list *mem_list;
acpi_status status;
- ACPI_FUNCTION_TRACE(ut_remove_allocation);
+ ACPI_FUNCTION_NAME(ut_remove_allocation);
if (acpi_gbl_disable_mem_tracking) {
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
}
mem_list = acpi_gbl_global_list;
@@ -450,12 +450,12 @@
ACPI_ERROR((module, line,
"Empty allocation list, nothing to free!"));
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ return (status);
}
/* Unlink */
@@ -470,15 +470,15 @@
(allocation->next)->previous = allocation->previous;
}
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing %p, size 0%X\n",
+ &allocation->user_space, allocation->size));
+
/* Mark the segment as deleted */
ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
- ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing size 0%X\n",
- allocation->size));
-
status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
- return_ACPI_STATUS(status);
+ return (status);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 390db0c..48efb44 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,11 +44,7 @@
#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
-#include "acevents.h"
-#include "acnamesp.h"
#include "acdebug.h"
-#include "actables.h"
-#include "acinterp.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxface")
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index d4d3826..976b6c7 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -297,9 +297,9 @@
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
+ * pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c
index 14f5236..41ebaaf 100644
--- a/drivers/acpi/acpica/utxfinit.c
+++ b/drivers/acpi/acpica/utxfinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utxfmutex.c b/drivers/acpi/acpica/utxfmutex.c
index 0a40a85..3122997 100644
--- a/drivers/acpi/acpica/utxfmutex.c
+++ b/drivers/acpi/acpica/utxfmutex.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c
index e6defd8..1e5d8a4 100644
--- a/drivers/acpi/apei/cper.c
+++ b/drivers/acpi/apei/cper.c
@@ -29,6 +29,7 @@
#include <linux/time.h>
#include <linux/cper.h>
#include <linux/acpi.h>
+#include <linux/pci.h>
#include <linux/aer.h>
/*
@@ -249,6 +250,10 @@
static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
const struct acpi_hest_generic_data *gdata)
{
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+ struct pci_dev *dev;
+#endif
+
if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE)
printk("%s""port_type: %d, %s\n", pfx, pcie->port_type,
pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ?
@@ -281,10 +286,18 @@
"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
pfx, pcie->bridge.secondary_status, pcie->bridge.control);
#ifdef CONFIG_ACPI_APEI_PCIEAER
- if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) {
- struct aer_capability_regs *aer_regs = (void *)pcie->aer_info;
- cper_print_aer(pfx, gdata->error_severity, aer_regs);
+ dev = pci_get_domain_bus_and_slot(pcie->device_id.segment,
+ pcie->device_id.bus, pcie->device_id.function);
+ if (!dev) {
+ pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n",
+ pcie->device_id.segment, pcie->device_id.bus,
+ pcie->device_id.slot, pcie->device_id.function);
+ return;
}
+ if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO)
+ cper_print_aer(pfx, dev, gdata->error_severity,
+ (struct aer_capability_regs *) pcie->aer_info);
+ pci_dev_put(dev);
#endif
}
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 7efaeaa..c5cd5b5 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -1111,7 +1111,7 @@
return result;
}
-static int acpi_battery_remove(struct acpi_device *device, int type)
+static int acpi_battery_remove(struct acpi_device *device)
{
struct acpi_battery *battery = NULL;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 1f0d457..01708a1 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -178,276 +178,6 @@
}
EXPORT_SYMBOL(acpi_bus_get_private_data);
-/* --------------------------------------------------------------------------
- Power Management
- -------------------------------------------------------------------------- */
-
-static const char *state_string(int state)
-{
- switch (state) {
- case ACPI_STATE_D0:
- return "D0";
- case ACPI_STATE_D1:
- return "D1";
- case ACPI_STATE_D2:
- return "D2";
- case ACPI_STATE_D3_HOT:
- return "D3hot";
- case ACPI_STATE_D3_COLD:
- return "D3";
- default:
- return "(unknown)";
- }
-}
-
-static int __acpi_bus_get_power(struct acpi_device *device, int *state)
-{
- int result = ACPI_STATE_UNKNOWN;
-
- if (!device || !state)
- return -EINVAL;
-
- if (!device->flags.power_manageable) {
- /* TBD: Non-recursive algorithm for walking up hierarchy. */
- *state = device->parent ?
- device->parent->power.state : ACPI_STATE_D0;
- goto out;
- }
-
- /*
- * Get the device's power state either directly (via _PSC) or
- * indirectly (via power resources).
- */
- if (device->power.flags.explicit_get) {
- unsigned long long psc;
- acpi_status status = acpi_evaluate_integer(device->handle,
- "_PSC", NULL, &psc);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- result = psc;
- }
- /* The test below covers ACPI_STATE_UNKNOWN too. */
- if (result <= ACPI_STATE_D2) {
- ; /* Do nothing. */
- } else if (device->power.flags.power_resources) {
- int error = acpi_power_get_inferred_state(device, &result);
- if (error)
- return error;
- } else if (result == ACPI_STATE_D3_HOT) {
- result = ACPI_STATE_D3;
- }
-
- /*
- * If we were unsure about the device parent's power state up to this
- * point, the fact that the device is in D0 implies that the parent has
- * to be in D0 too.
- */
- if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
- && result == ACPI_STATE_D0)
- device->parent->power.state = ACPI_STATE_D0;
-
- *state = result;
-
- out:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
- device->pnp.bus_id, state_string(*state)));
-
- return 0;
-}
-
-
-/**
- * acpi_device_set_power - Set power state of an ACPI device.
- * @device: Device to set the power state of.
- * @state: New power state to set.
- *
- * Callers must ensure that the device is power manageable before using this
- * function.
- */
-int acpi_device_set_power(struct acpi_device *device, int state)
-{
- int result = 0;
- acpi_status status = AE_OK;
- char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
-
- if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
- return -EINVAL;
-
- /* Make sure this is a valid target state */
-
- if (state == device->power.state) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
- state_string(state)));
- return 0;
- }
-
- if (!device->power.states[state].flags.valid) {
- printk(KERN_WARNING PREFIX "Device does not support %s\n",
- state_string(state));
- return -ENODEV;
- }
- if (device->parent && (state < device->parent->power.state)) {
- printk(KERN_WARNING PREFIX
- "Cannot set device to a higher-powered"
- " state than parent\n");
- return -ENODEV;
- }
-
- /* For D3cold we should execute _PS3, not _PS4. */
- if (state == ACPI_STATE_D3_COLD)
- object_name[3] = '3';
-
- /*
- * Transition Power
- * ----------------
- * On transitions to a high-powered state we first apply power (via
- * power resources) then evalute _PSx. Conversly for transitions to
- * a lower-powered state.
- */
- if (state < device->power.state) {
- if (device->power.state >= ACPI_STATE_D3_HOT &&
- state != ACPI_STATE_D0) {
- printk(KERN_WARNING PREFIX
- "Cannot transition to non-D0 state from D3\n");
- return -ENODEV;
- }
- if (device->power.flags.power_resources) {
- result = acpi_power_transition(device, state);
- if (result)
- goto end;
- }
- if (device->power.states[state].flags.explicit_set) {
- status = acpi_evaluate_object(device->handle,
- object_name, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
- }
- } else {
- if (device->power.states[state].flags.explicit_set) {
- status = acpi_evaluate_object(device->handle,
- object_name, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
- }
- if (device->power.flags.power_resources) {
- result = acpi_power_transition(device, state);
- if (result)
- goto end;
- }
- }
-
- end:
- if (result)
- printk(KERN_WARNING PREFIX
- "Device [%s] failed to transition to %s\n",
- device->pnp.bus_id, state_string(state));
- else {
- device->power.state = state;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device [%s] transitioned to %s\n",
- device->pnp.bus_id, state_string(state)));
- }
-
- return result;
-}
-EXPORT_SYMBOL(acpi_device_set_power);
-
-
-int acpi_bus_set_power(acpi_handle handle, int state)
-{
- struct acpi_device *device;
- int result;
-
- result = acpi_bus_get_device(handle, &device);
- if (result)
- return result;
-
- if (!device->flags.power_manageable) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device [%s] is not power manageable\n",
- dev_name(&device->dev)));
- return -ENODEV;
- }
-
- return acpi_device_set_power(device, state);
-}
-EXPORT_SYMBOL(acpi_bus_set_power);
-
-
-int acpi_bus_init_power(struct acpi_device *device)
-{
- int state;
- int result;
-
- if (!device)
- return -EINVAL;
-
- device->power.state = ACPI_STATE_UNKNOWN;
-
- result = __acpi_bus_get_power(device, &state);
- if (result)
- return result;
-
- if (device->power.flags.power_resources)
- result = acpi_power_on_resources(device, state);
-
- if (!result)
- device->power.state = state;
-
- return result;
-}
-
-
-int acpi_bus_update_power(acpi_handle handle, int *state_p)
-{
- struct acpi_device *device;
- int state;
- int result;
-
- result = acpi_bus_get_device(handle, &device);
- if (result)
- return result;
-
- result = __acpi_bus_get_power(device, &state);
- if (result)
- return result;
-
- result = acpi_device_set_power(device, state);
- if (!result && state_p)
- *state_p = state;
-
- return result;
-}
-EXPORT_SYMBOL_GPL(acpi_bus_update_power);
-
-
-bool acpi_bus_power_manageable(acpi_handle handle)
-{
- struct acpi_device *device;
- int result;
-
- result = acpi_bus_get_device(handle, &device);
- return result ? false : device->flags.power_manageable;
-}
-
-EXPORT_SYMBOL(acpi_bus_power_manageable);
-
-bool acpi_bus_can_wakeup(acpi_handle handle)
-{
- struct acpi_device *device;
- int result;
-
- result = acpi_bus_get_device(handle, &device);
- return result ? false : device->wakeup.flags.valid;
-}
-
-EXPORT_SYMBOL(acpi_bus_can_wakeup);
-
static void acpi_print_osc_error(acpi_handle handle,
struct acpi_osc_context *context, char *error)
{
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index f0d936b..86c7d54 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -75,7 +75,7 @@
MODULE_DEVICE_TABLE(acpi, button_device_ids);
static int acpi_button_add(struct acpi_device *device);
-static int acpi_button_remove(struct acpi_device *device, int type);
+static int acpi_button_remove(struct acpi_device *device);
static void acpi_button_notify(struct acpi_device *device, u32 event);
#ifdef CONFIG_PM_SLEEP
@@ -433,7 +433,7 @@
return error;
}
-static int acpi_button_remove(struct acpi_device *device, int type)
+static int acpi_button_remove(struct acpi_device *device)
{
struct acpi_button *button = acpi_driver_data(device);
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 811910b..5523ba7 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -34,46 +34,34 @@
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#include <acpi/container.h>
#define PREFIX "ACPI: "
-#define ACPI_CONTAINER_DEVICE_NAME "ACPI container device"
-#define ACPI_CONTAINER_CLASS "container"
-
-#define INSTALL_NOTIFY_HANDLER 1
-#define UNINSTALL_NOTIFY_HANDLER 2
-
#define _COMPONENT ACPI_CONTAINER_COMPONENT
ACPI_MODULE_NAME("container");
-MODULE_AUTHOR("Anil S Keshavamurthy");
-MODULE_DESCRIPTION("ACPI container driver");
-MODULE_LICENSE("GPL");
-
-static int acpi_container_add(struct acpi_device *device);
-static int acpi_container_remove(struct acpi_device *device, int type);
-
static const struct acpi_device_id container_device_ids[] = {
{"ACPI0004", 0},
{"PNP0A05", 0},
{"PNP0A06", 0},
{"", 0},
};
-MODULE_DEVICE_TABLE(acpi, container_device_ids);
-static struct acpi_driver acpi_container_driver = {
- .name = "container",
- .class = ACPI_CONTAINER_CLASS,
+static int container_device_attach(struct acpi_device *device,
+ const struct acpi_device_id *not_used)
+{
+ /*
+ * FIXME: This is necessary, so that acpi_eject_store() doesn't return
+ * -ENODEV for containers.
+ */
+ return 1;
+}
+
+static struct acpi_scan_handler container_device_handler = {
.ids = container_device_ids,
- .ops = {
- .add = acpi_container_add,
- .remove = acpi_container_remove,
- },
+ .attach = container_device_attach,
};
-/*******************************************************************/
-
static int is_device_present(acpi_handle handle)
{
acpi_handle temp;
@@ -92,73 +80,6 @@
return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
}
-static bool is_container_device(const char *hid)
-{
- const struct acpi_device_id *container_id;
-
- for (container_id = container_device_ids;
- container_id->id[0]; container_id++) {
- if (!strcmp((char *)container_id->id, hid))
- return true;
- }
-
- return false;
-}
-
-/*******************************************************************/
-static int acpi_container_add(struct acpi_device *device)
-{
- struct acpi_container *container;
-
- container = kzalloc(sizeof(struct acpi_container), GFP_KERNEL);
- if (!container)
- return -ENOMEM;
-
- container->handle = device->handle;
- strcpy(acpi_device_name(device), ACPI_CONTAINER_DEVICE_NAME);
- strcpy(acpi_device_class(device), ACPI_CONTAINER_CLASS);
- device->driver_data = container;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device <%s> bid <%s>\n",
- acpi_device_name(device), acpi_device_bid(device)));
-
- return 0;
-}
-
-static int acpi_container_remove(struct acpi_device *device, int type)
-{
- acpi_status status = AE_OK;
- struct acpi_container *pc = NULL;
-
- pc = acpi_driver_data(device);
- kfree(pc);
- return status;
-}
-
-static int container_device_add(struct acpi_device **device, acpi_handle handle)
-{
- acpi_handle phandle;
- struct acpi_device *pdev;
- int result;
-
-
- if (acpi_get_parent(handle, &phandle)) {
- return -ENODEV;
- }
-
- if (acpi_bus_get_device(phandle, &pdev)) {
- return -ENODEV;
- }
-
- if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_DEVICE)) {
- return -ENODEV;
- }
-
- result = acpi_bus_start(*device);
-
- return result;
-}
-
static void container_notify_cb(acpi_handle handle, u32 type, void *context)
{
struct acpi_device *device = NULL;
@@ -167,6 +88,8 @@
acpi_status status;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
+ acpi_scan_lock_acquire();
+
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
/* Fall through */
@@ -182,7 +105,7 @@
/* device exist and this is a remove request */
device->flags.eject_pending = 1;
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
- return;
+ goto out;
}
break;
}
@@ -190,11 +113,16 @@
if (!ACPI_FAILURE(status) || device)
break;
- result = container_device_add(&device, handle);
+ result = acpi_bus_scan(handle);
if (result) {
acpi_handle_warn(handle, "Failed to add container\n");
break;
}
+ result = acpi_bus_get_device(handle, &device);
+ if (result) {
+ acpi_handle_warn(handle, "Missing device object\n");
+ break;
+ }
kobject_uevent(&device->dev.kobj, KOBJ_ONLINE);
ost_code = ACPI_OST_SC_SUCCESS;
@@ -204,98 +132,59 @@
if (!acpi_bus_get_device(handle, &device) && device) {
device->flags.eject_pending = 1;
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
- return;
+ goto out;
}
break;
default:
/* non-hotplug event; possibly handled by other handler */
- return;
+ goto out;
}
/* Inform firmware that the hotplug operation has completed */
(void) acpi_evaluate_hotplug_ost(handle, type, ost_code, NULL);
- return;
+
+ out:
+ acpi_scan_lock_release();
}
-static acpi_status
-container_walk_namespace_cb(acpi_handle handle,
- u32 lvl, void *context, void **rv)
+static bool is_container(acpi_handle handle)
{
- char *hid = NULL;
struct acpi_device_info *info;
- acpi_status status;
- int *action = context;
+ bool ret = false;
- status = acpi_get_object_info(handle, &info);
- if (ACPI_FAILURE(status)) {
- return AE_OK;
+ if (ACPI_FAILURE(acpi_get_object_info(handle, &info)))
+ return false;
+
+ if (info->valid & ACPI_VALID_HID) {
+ const struct acpi_device_id *id;
+
+ for (id = container_device_ids; id->id[0]; id++) {
+ ret = !strcmp((char *)id->id, info->hardware_id.string);
+ if (ret)
+ break;
+ }
}
-
- if (info->valid & ACPI_VALID_HID)
- hid = info->hardware_id.string;
-
- if (hid == NULL) {
- goto end;
- }
-
- if (!is_container_device(hid))
- goto end;
-
- switch (*action) {
- case INSTALL_NOTIFY_HANDLER:
- acpi_install_notify_handler(handle,
- ACPI_SYSTEM_NOTIFY,
- container_notify_cb, NULL);
- break;
- case UNINSTALL_NOTIFY_HANDLER:
- acpi_remove_notify_handler(handle,
- ACPI_SYSTEM_NOTIFY,
- container_notify_cb);
- break;
- default:
- break;
- }
-
- end:
kfree(info);
+ return ret;
+}
+
+static acpi_status acpi_container_register_notify_handler(acpi_handle handle,
+ u32 lvl, void *ctxt,
+ void **retv)
+{
+ if (is_container(handle))
+ acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ container_notify_cb, NULL);
return AE_OK;
}
-static int __init acpi_container_init(void)
+void __init acpi_container_init(void)
{
- int result = 0;
- int action = INSTALL_NOTIFY_HANDLER;
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
+ acpi_container_register_notify_handler, NULL,
+ NULL, NULL);
- result = acpi_bus_register_driver(&acpi_container_driver);
- if (result < 0) {
- return (result);
- }
-
- /* register notify handler to every container device */
- acpi_walk_namespace(ACPI_TYPE_DEVICE,
- ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- container_walk_namespace_cb, NULL, &action, NULL);
-
- return (0);
+ acpi_scan_add_handler(&container_device_handler);
}
-
-static void __exit acpi_container_exit(void)
-{
- int action = UNINSTALL_NOTIFY_HANDLER;
-
-
- acpi_walk_namespace(ACPI_TYPE_DEVICE,
- ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- container_walk_namespace_cb, NULL, &action, NULL);
-
- acpi_bus_unregister_driver(&acpi_container_driver);
-
- return;
-}
-
-module_init(acpi_container_init);
-module_exit(acpi_container_exit);
diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c
new file mode 100644
index 0000000..5c15a91
--- /dev/null
+++ b/drivers/acpi/csrt.c
@@ -0,0 +1,159 @@
+/*
+ * Support for Core System Resources Table (CSRT)
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "ACPI: CSRT: " fmt
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+
+ACPI_MODULE_NAME("CSRT");
+
+static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev,
+ const struct acpi_csrt_group *grp)
+{
+ const struct acpi_csrt_shared_info *si;
+ struct resource res[3];
+ size_t nres;
+ int ret;
+
+ memset(res, 0, sizeof(res));
+ nres = 0;
+
+ si = (const struct acpi_csrt_shared_info *)&grp[1];
+ /*
+ * The peripherals that are listed on CSRT typically support only
+ * 32-bit addresses so we only use the low part of MMIO base for
+ * now.
+ */
+ if (!si->mmio_base_high && si->mmio_base_low) {
+ /*
+ * There is no size of the memory resource in shared_info
+ * so we assume that it is 4k here.
+ */
+ res[nres].start = si->mmio_base_low;
+ res[nres].end = res[0].start + SZ_4K - 1;
+ res[nres++].flags = IORESOURCE_MEM;
+ }
+
+ if (si->gsi_interrupt) {
+ int irq = acpi_register_gsi(NULL, si->gsi_interrupt,
+ si->interrupt_mode,
+ si->interrupt_polarity);
+ res[nres].start = irq;
+ res[nres].end = irq;
+ res[nres++].flags = IORESOURCE_IRQ;
+ }
+
+ if (si->base_request_line || si->num_handshake_signals) {
+ /*
+ * We pass the driver a DMA resource describing the range
+ * of request lines the device supports.
+ */
+ res[nres].start = si->base_request_line;
+ res[nres].end = res[nres].start + si->num_handshake_signals - 1;
+ res[nres++].flags = IORESOURCE_DMA;
+ }
+
+ ret = platform_device_add_resources(pdev, res, nres);
+ if (ret) {
+ if (si->gsi_interrupt)
+ acpi_unregister_gsi(si->gsi_interrupt);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init
+acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp)
+{
+ struct platform_device *pdev;
+ char vendor[5], name[16];
+ int ret, i;
+
+ vendor[0] = grp->vendor_id;
+ vendor[1] = grp->vendor_id >> 8;
+ vendor[2] = grp->vendor_id >> 16;
+ vendor[3] = grp->vendor_id >> 24;
+ vendor[4] = '\0';
+
+ if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
+ return -ENODEV;
+
+ snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id);
+ pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO);
+ if (!pdev)
+ return -ENOMEM;
+
+ /* Add resources based on the shared info */
+ ret = acpi_csrt_parse_shared_info(pdev, grp);
+ if (ret)
+ goto fail;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto fail;
+
+ for (i = 0; i < pdev->num_resources; i++)
+ dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]);
+
+ return 0;
+
+fail:
+ platform_device_put(pdev);
+ return ret;
+}
+
+/*
+ * CSRT or Core System Resources Table is a proprietary ACPI table
+ * introduced by Microsoft. This table can contain devices that are not in
+ * the system DSDT table. In particular DMA controllers might be described
+ * here.
+ *
+ * We present these devices as normal platform devices that don't have ACPI
+ * IDs or handle. The platform device name will be something like
+ * <VENDOR><DEVID>.<n>.auto for example: INTL9C06.0.auto.
+ */
+void __init acpi_csrt_init(void)
+{
+ struct acpi_csrt_group *grp, *end;
+ struct acpi_table_csrt *csrt;
+ acpi_status status;
+ int ret;
+
+ status = acpi_get_table(ACPI_SIG_CSRT, 0,
+ (struct acpi_table_header **)&csrt);
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND)
+ pr_warn("failed to get the CSRT table\n");
+ return;
+ }
+
+ pr_debug("parsing CSRT table for devices\n");
+
+ grp = (struct acpi_csrt_group *)(csrt + 1);
+ end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
+
+ while (grp < end) {
+ ret = acpi_csrt_parse_resource_group(grp);
+ if (ret) {
+ pr_warn("error in parsing resource group: %d\n", ret);
+ return;
+ }
+
+ grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
+ }
+}
diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c
index 5d42c24..6adfc70 100644
--- a/drivers/acpi/custom_method.c
+++ b/drivers/acpi/custom_method.c
@@ -1,5 +1,5 @@
/*
- * debugfs.c - ACPI debugfs interface to userspace.
+ * custom_method.c - debugfs interface for customizing ACPI control method
*/
#include <linux/init.h>
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index c6ff606..dd314ef 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -30,6 +30,12 @@
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#include "internal.h"
+
+#define _COMPONENT ACPI_POWER_COMPONENT
+ACPI_MODULE_NAME("device_pm");
static DEFINE_MUTEX(acpi_pm_notifier_lock);
@@ -94,6 +100,293 @@
}
/**
+ * acpi_power_state_string - String representation of ACPI device power state.
+ * @state: ACPI device power state to return the string representation of.
+ */
+const char *acpi_power_state_string(int state)
+{
+ switch (state) {
+ case ACPI_STATE_D0:
+ return "D0";
+ case ACPI_STATE_D1:
+ return "D1";
+ case ACPI_STATE_D2:
+ return "D2";
+ case ACPI_STATE_D3_HOT:
+ return "D3hot";
+ case ACPI_STATE_D3_COLD:
+ return "D3cold";
+ default:
+ return "(unknown)";
+ }
+}
+
+/**
+ * acpi_device_get_power - Get power state of an ACPI device.
+ * @device: Device to get the power state of.
+ * @state: Place to store the power state of the device.
+ *
+ * This function does not update the device's power.state field, but it may
+ * update its parent's power.state field (when the parent's power state is
+ * unknown and the device's power state turns out to be D0).
+ */
+int acpi_device_get_power(struct acpi_device *device, int *state)
+{
+ int result = ACPI_STATE_UNKNOWN;
+
+ if (!device || !state)
+ return -EINVAL;
+
+ if (!device->flags.power_manageable) {
+ /* TBD: Non-recursive algorithm for walking up hierarchy. */
+ *state = device->parent ?
+ device->parent->power.state : ACPI_STATE_D0;
+ goto out;
+ }
+
+ /*
+ * Get the device's power state either directly (via _PSC) or
+ * indirectly (via power resources).
+ */
+ if (device->power.flags.explicit_get) {
+ unsigned long long psc;
+ acpi_status status = acpi_evaluate_integer(device->handle,
+ "_PSC", NULL, &psc);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ result = psc;
+ }
+ /* The test below covers ACPI_STATE_UNKNOWN too. */
+ if (result <= ACPI_STATE_D2) {
+ ; /* Do nothing. */
+ } else if (device->power.flags.power_resources) {
+ int error = acpi_power_get_inferred_state(device, &result);
+ if (error)
+ return error;
+ } else if (result == ACPI_STATE_D3_HOT) {
+ result = ACPI_STATE_D3;
+ }
+
+ /*
+ * If we were unsure about the device parent's power state up to this
+ * point, the fact that the device is in D0 implies that the parent has
+ * to be in D0 too.
+ */
+ if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
+ && result == ACPI_STATE_D0)
+ device->parent->power.state = ACPI_STATE_D0;
+
+ *state = result;
+
+ out:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
+ device->pnp.bus_id, acpi_power_state_string(*state)));
+
+ return 0;
+}
+
+static int acpi_dev_pm_explicit_set(struct acpi_device *adev, int state)
+{
+ if (adev->power.states[state].flags.explicit_set) {
+ char method[5] = { '_', 'P', 'S', '0' + state, '\0' };
+ acpi_status status;
+
+ status = acpi_evaluate_object(adev->handle, method, NULL, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
+{
+ int result = 0;
+ bool cut_power = false;
+
+ if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
+ return -EINVAL;
+
+ /* Make sure this is a valid target state */
+
+ if (state == device->power.state) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
+ acpi_power_state_string(state)));
+ return 0;
+ }
+
+ if (!device->power.states[state].flags.valid) {
+ printk(KERN_WARNING PREFIX "Device does not support %s\n",
+ acpi_power_state_string(state));
+ return -ENODEV;
+ }
+ if (device->parent && (state < device->parent->power.state)) {
+ printk(KERN_WARNING PREFIX
+ "Cannot set device to a higher-powered"
+ " state than parent\n");
+ return -ENODEV;
+ }
+
+ /* For D3cold we should first transition into D3hot. */
+ if (state == ACPI_STATE_D3_COLD
+ && device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible) {
+ state = ACPI_STATE_D3_HOT;
+ cut_power = true;
+ }
+
+ if (state < device->power.state && state != ACPI_STATE_D0
+ && device->power.state >= ACPI_STATE_D3_HOT) {
+ printk(KERN_WARNING PREFIX
+ "Cannot transition to non-D0 state from D3\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Transition Power
+ * ----------------
+ * In accordance with the ACPI specification first apply power (via
+ * power resources) and then evalute _PSx.
+ */
+ if (device->power.flags.power_resources) {
+ result = acpi_power_transition(device, state);
+ if (result)
+ goto end;
+ }
+ result = acpi_dev_pm_explicit_set(device, state);
+ if (result)
+ goto end;
+
+ if (cut_power) {
+ device->power.state = state;
+ state = ACPI_STATE_D3_COLD;
+ result = acpi_power_transition(device, state);
+ }
+
+ end:
+ if (result) {
+ printk(KERN_WARNING PREFIX
+ "Device [%s] failed to transition to %s\n",
+ device->pnp.bus_id,
+ acpi_power_state_string(state));
+ } else {
+ device->power.state = state;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Device [%s] transitioned to %s\n",
+ device->pnp.bus_id,
+ acpi_power_state_string(state)));
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(acpi_device_set_power);
+
+int acpi_bus_set_power(acpi_handle handle, int state)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ if (result)
+ return result;
+
+ if (!device->flags.power_manageable) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Device [%s] is not power manageable\n",
+ dev_name(&device->dev)));
+ return -ENODEV;
+ }
+
+ return acpi_device_set_power(device, state);
+}
+EXPORT_SYMBOL(acpi_bus_set_power);
+
+int acpi_bus_init_power(struct acpi_device *device)
+{
+ int state;
+ int result;
+
+ if (!device)
+ return -EINVAL;
+
+ device->power.state = ACPI_STATE_UNKNOWN;
+
+ result = acpi_device_get_power(device, &state);
+ if (result)
+ return result;
+
+ if (state < ACPI_STATE_D3_COLD && device->power.flags.power_resources) {
+ result = acpi_power_on_resources(device, state);
+ if (result)
+ return result;
+
+ result = acpi_dev_pm_explicit_set(device, state);
+ if (result)
+ return result;
+ } else if (state == ACPI_STATE_UNKNOWN) {
+ /* No power resources and missing _PSC? Try to force D0. */
+ state = ACPI_STATE_D0;
+ result = acpi_dev_pm_explicit_set(device, state);
+ if (result)
+ return result;
+ }
+ device->power.state = state;
+ return 0;
+}
+
+int acpi_bus_update_power(acpi_handle handle, int *state_p)
+{
+ struct acpi_device *device;
+ int state;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ if (result)
+ return result;
+
+ result = acpi_device_get_power(device, &state);
+ if (result)
+ return result;
+
+ if (state == ACPI_STATE_UNKNOWN)
+ state = ACPI_STATE_D0;
+
+ result = acpi_device_set_power(device, state);
+ if (!result && state_p)
+ *state_p = state;
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(acpi_bus_update_power);
+
+bool acpi_bus_power_manageable(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->flags.power_manageable;
+}
+EXPORT_SYMBOL(acpi_bus_power_manageable);
+
+bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->wakeup.flags.valid;
+}
+EXPORT_SYMBOL(acpi_bus_can_wakeup);
+
+/**
* acpi_device_power_state - Get preferred power state of ACPI device.
* @dev: Device whose preferred target power state to return.
* @adev: ACPI device node corresponding to @dev.
@@ -213,7 +506,7 @@
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ if (!handle || acpi_bus_get_device(handle, &adev)) {
dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
return -ENODEV;
}
@@ -290,7 +583,7 @@
return -EINVAL;
handle = DEVICE_ACPI_HANDLE(phys_dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ if (!handle || acpi_bus_get_device(handle, &adev)) {
dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
__func__);
return -ENODEV;
@@ -304,7 +597,7 @@
void *context) {}
#endif /* CONFIG_PM_RUNTIME */
- #ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
/**
* __acpi_device_sleep_wake - Enable or disable device to wake up the system.
* @dev: Device to enable/desible to wake up the system.
@@ -334,7 +627,7 @@
return -EINVAL;
handle = DEVICE_ACPI_HANDLE(dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ if (!handle || acpi_bus_get_device(handle, &adev)) {
dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
return -ENODEV;
}
@@ -353,7 +646,7 @@
* acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
* @dev: Device to get the ACPI node for.
*/
-static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
@@ -665,3 +958,59 @@
}
}
EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
+
+/**
+ * acpi_dev_pm_add_dependent - Add physical device depending for PM.
+ * @handle: Handle of ACPI device node.
+ * @depdev: Device depending on that node for PM.
+ */
+void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev)
+{
+ struct acpi_device_physical_node *dep;
+ struct acpi_device *adev;
+
+ if (!depdev || acpi_bus_get_device(handle, &adev))
+ return;
+
+ mutex_lock(&adev->physical_node_lock);
+
+ list_for_each_entry(dep, &adev->power_dependent, node)
+ if (dep->dev == depdev)
+ goto out;
+
+ dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+ if (dep) {
+ dep->dev = depdev;
+ list_add_tail(&dep->node, &adev->power_dependent);
+ }
+
+ out:
+ mutex_unlock(&adev->physical_node_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_add_dependent);
+
+/**
+ * acpi_dev_pm_remove_dependent - Remove physical device depending for PM.
+ * @handle: Handle of ACPI device node.
+ * @depdev: Device depending on that node for PM.
+ */
+void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev)
+{
+ struct acpi_device_physical_node *dep;
+ struct acpi_device *adev;
+
+ if (!depdev || acpi_bus_get_device(handle, &adev))
+ return;
+
+ mutex_lock(&adev->physical_node_lock);
+
+ list_for_each_entry(dep, &adev->power_dependent, node)
+ if (dep->dev == depdev) {
+ list_del(&dep->node);
+ kfree(dep);
+ break;
+ }
+
+ mutex_unlock(&adev->physical_node_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index f32bd47..4fdea38 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -310,8 +310,6 @@
static struct acpi_device * dock_create_acpi_device(acpi_handle handle)
{
struct acpi_device *device;
- struct acpi_device *parent_device;
- acpi_handle parent;
int ret;
if (acpi_bus_get_device(handle, &device)) {
@@ -319,16 +317,11 @@
* no device created for this object,
* so we should create one.
*/
- acpi_get_parent(handle, &parent);
- if (acpi_bus_get_device(parent, &parent_device))
- parent_device = NULL;
-
- ret = acpi_bus_add(&device, parent_device, handle,
- ACPI_BUS_TYPE_DEVICE);
- if (ret) {
+ ret = acpi_bus_scan(handle);
+ if (ret)
pr_debug("error adding bus, %x\n", -ret);
- return NULL;
- }
+
+ acpi_bus_get_device(handle, &device);
}
return device;
}
@@ -343,13 +336,9 @@
static void dock_remove_acpi_device(acpi_handle handle)
{
struct acpi_device *device;
- int ret;
- if (!acpi_bus_get_device(handle, &device)) {
- ret = acpi_bus_trim(device, 1);
- if (ret)
- pr_debug("error removing bus, %x\n", -ret);
- }
+ if (!acpi_bus_get_device(handle, &device))
+ acpi_bus_trim(device);
}
/**
@@ -755,7 +744,9 @@
{
struct dock_data *data = context;
+ acpi_scan_lock_acquire();
dock_notify(data->handle, data->event, data->ds);
+ acpi_scan_lock_release();
kfree(data);
}
@@ -768,20 +759,31 @@
if (event != ACPI_NOTIFY_BUS_CHECK && event != ACPI_NOTIFY_DEVICE_CHECK
&& event != ACPI_NOTIFY_EJECT_REQUEST)
return 0;
+
+ acpi_scan_lock_acquire();
+
list_for_each_entry(dock_station, &dock_stations, sibling) {
if (dock_station->handle == handle) {
struct dock_data *dd;
+ acpi_status status;
dd = kmalloc(sizeof(*dd), GFP_KERNEL);
if (!dd)
- return 0;
+ break;
+
dd->handle = handle;
dd->event = event;
dd->ds = dock_station;
- acpi_os_hotplug_execute(acpi_dock_deferred_cb, dd);
- return 0 ;
+ status = acpi_os_hotplug_execute(acpi_dock_deferred_cb,
+ dd);
+ if (ACPI_FAILURE(status))
+ kfree(dd);
+
+ break;
}
}
+
+ acpi_scan_lock_release();
return 0;
}
@@ -836,7 +838,7 @@
struct dock_station *dock_station = dev->platform_data;
- if (ACPI_SUCCESS(acpi_bus_get_device(dock_station->handle, &tmp)))
+ if (!acpi_bus_get_device(dock_station->handle, &tmp))
return snprintf(buf, PAGE_SIZE, "1\n");
return snprintf(buf, PAGE_SIZE, "0\n");
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 354007d..d45b287 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -852,7 +852,7 @@
return ret;
}
-static int acpi_ec_remove(struct acpi_device *device, int type)
+static int acpi_ec_remove(struct acpi_device *device)
{
struct acpi_ec *ec;
struct acpi_ec_query_handler *handler, *tmp;
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 3bd6a54..f815da8 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -45,7 +45,7 @@
MODULE_LICENSE("GPL");
static int acpi_fan_add(struct acpi_device *device);
-static int acpi_fan_remove(struct acpi_device *device, int type);
+static int acpi_fan_remove(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
@@ -172,7 +172,7 @@
return result;
}
-static int acpi_fan_remove(struct acpi_device *device, int type)
+static int acpi_fan_remove(struct acpi_device *device)
{
struct thermal_cooling_device *cdev = acpi_driver_data(device);
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 35da181..ef6f155 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -68,6 +68,9 @@
{
struct acpi_bus_type *tmp, *ret = NULL;
+ if (!type)
+ return NULL;
+
down_read(&bus_type_sem);
list_for_each_entry(tmp, &bus_type_list, list) {
if (tmp->bus == type) {
@@ -95,40 +98,31 @@
return ret;
}
-/* Get device's handler per its address under its parent */
-struct acpi_find_child {
- acpi_handle handle;
- u64 address;
-};
-
-static acpi_status
-do_acpi_find_child(acpi_handle handle, u32 lvl, void *context, void **rv)
+static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used,
+ void *addr_p, void **ret_p)
{
+ unsigned long long addr;
acpi_status status;
- struct acpi_device_info *info;
- struct acpi_find_child *find = context;
- status = acpi_get_object_info(handle, &info);
- if (ACPI_SUCCESS(status)) {
- if ((info->address == find->address)
- && (info->valid & ACPI_VALID_ADR))
- find->handle = handle;
- kfree(info);
+ status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr);
+ if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) {
+ *ret_p = handle;
+ return AE_CTRL_TERMINATE;
}
return AE_OK;
}
acpi_handle acpi_get_child(acpi_handle parent, u64 address)
{
- struct acpi_find_child find = { NULL, address };
+ void *ret = NULL;
if (!parent)
return NULL;
- acpi_walk_namespace(ACPI_TYPE_DEVICE, parent,
- 1, do_acpi_find_child, NULL, &find, NULL);
- return find.handle;
-}
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, NULL,
+ do_acpi_find_child, &address, &ret);
+ return (acpi_handle)ret;
+}
EXPORT_SYMBOL(acpi_get_child);
static int acpi_bind_one(struct device *dev, acpi_handle handle)
@@ -269,28 +263,39 @@
{
struct acpi_bus_type *type;
acpi_handle handle;
- int ret = -EINVAL;
+ int ret;
ret = acpi_bind_one(dev, NULL);
- if (!ret)
- goto out;
-
- if (!dev->bus || !dev->parent) {
+ if (ret && (!dev->bus || !dev->parent)) {
/* bridge devices genernally haven't bus or parent */
ret = acpi_find_bridge_device(dev, &handle);
- goto end;
+ if (!ret) {
+ ret = acpi_bind_one(dev, handle);
+ if (ret)
+ goto out;
+ }
}
+
type = acpi_get_bus_type(dev->bus);
- if (!type) {
- DBG("No ACPI bus support for %s\n", dev_name(dev));
- ret = -EINVAL;
- goto end;
+ if (ret) {
+ if (!type || !type->find_device) {
+ DBG("No ACPI bus support for %s\n", dev_name(dev));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = type->find_device(dev, &handle);
+ if (ret) {
+ DBG("Unable to get handle for %s\n", dev_name(dev));
+ goto out;
+ }
+ ret = acpi_bind_one(dev, handle);
+ if (ret)
+ goto out;
}
- if ((ret = type->find_device(dev, &handle)) != 0)
- DBG("Can't get handler for %s\n", dev_name(dev));
- end:
- if (!ret)
- acpi_bind_one(dev, handle);
+
+ if (type && type->setup)
+ type->setup(dev);
out:
#if ACPI_GLUE_DEBUG
@@ -309,6 +314,12 @@
static int acpi_platform_notify_remove(struct device *dev)
{
+ struct acpi_bus_type *type;
+
+ type = acpi_get_bus_type(dev->bus);
+ if (type && type->cleanup)
+ type->cleanup(dev);
+
acpi_unbind_one(dev);
return 0;
}
diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c
index a0cc796..13b1d39 100644
--- a/drivers/acpi/hed.c
+++ b/drivers/acpi/hed.c
@@ -70,7 +70,7 @@
return 0;
}
-static int acpi_hed_remove(struct acpi_device *device, int type)
+static int acpi_hed_remove(struct acpi_device *device)
{
hed_handle = NULL;
return 0;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 3c407cd..7909232 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -25,7 +25,16 @@
int init_acpi_device_notify(void);
int acpi_scan_init(void);
+void acpi_pci_root_init(void);
+void acpi_pci_link_init(void);
+void acpi_platform_init(void);
int acpi_sysfs_init(void);
+void acpi_csrt_init(void);
+#ifdef CONFIG_ACPI_CONTAINER
+void acpi_container_init(void);
+#else
+static inline void acpi_container_init(void) {}
+#endif
#ifdef CONFIG_DEBUG_FS
extern struct dentry *acpi_debugfs_dir;
@@ -35,15 +44,33 @@
#endif
/* --------------------------------------------------------------------------
+ Device Node Initialization / Removal
+ -------------------------------------------------------------------------- */
+#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING)
+
+int acpi_device_add(struct acpi_device *device,
+ void (*release)(struct device *));
+void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
+ int type, unsigned long long sta);
+void acpi_device_add_finalize(struct acpi_device *device);
+void acpi_free_ids(struct acpi_device *device);
+
+/* --------------------------------------------------------------------------
Power Resource
-------------------------------------------------------------------------- */
int acpi_power_init(void);
+void acpi_power_resources_list_free(struct list_head *list);
+int acpi_extract_power_resources(union acpi_object *package, unsigned int start,
+ struct list_head *list);
+int acpi_add_power_resource(acpi_handle handle);
+void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
+int acpi_power_min_system_level(struct list_head *list);
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state);
int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
-int acpi_bus_init_power(struct acpi_device *device);
int acpi_wakeup_device_init(void);
void acpi_early_processor_set_pdc(void);
@@ -98,6 +125,4 @@
-------------------------------------------------------------------------- */
struct platform_device;
-struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
-
#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index cb31298..33e609f 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -116,14 +116,16 @@
struct acpi_srat_mem_affinity *p =
(struct acpi_srat_mem_affinity *)header;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s\n",
+ "SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n",
(unsigned long)p->base_address,
(unsigned long)p->length,
p->proximity_domain,
(p->flags & ACPI_SRAT_MEM_ENABLED)?
"enabled" : "disabled",
(p->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)?
- " hot-pluggable" : ""));
+ " hot-pluggable" : "",
+ (p->flags & ACPI_SRAT_MEM_NON_VOLATILE)?
+ " non-volatile" : ""));
}
#endif /* ACPI_DEBUG_OUTPUT */
break;
@@ -273,7 +275,7 @@
static int __init
acpi_table_parse_srat(enum acpi_srat_type id,
- acpi_table_entry_handler handler, unsigned int max_entries)
+ acpi_tbl_entry_handler handler, unsigned int max_entries)
{
return acpi_table_parse_entries(ACPI_SIG_SRAT,
sizeof(struct acpi_table_srat), id,
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index bd22f86..908b02d 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -787,7 +787,7 @@
acpi_irq_handler = handler;
acpi_irq_context = context;
- if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
+ if (request_irq(irq, acpi_irq, IRQF_SHARED | IRQF_NO_SUSPEND, "acpi", acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
acpi_irq_handler = NULL;
return AE_NOT_ACQUIRED;
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
deleted file mode 100644
index a1dee29..0000000
--- a/drivers/acpi/pci_bind.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * pci_bind.c - ACPI PCI Device Binding ($Revision: 2 $)
- *
- * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pci-acpi.h>
-#include <linux/acpi.h>
-#include <linux/pm_runtime.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-
-#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME("pci_bind");
-
-static int acpi_pci_unbind(struct acpi_device *device)
-{
- struct pci_dev *dev;
-
- dev = acpi_get_pci_dev(device->handle);
- if (!dev)
- goto out;
-
- device_set_run_wake(&dev->dev, false);
- pci_acpi_remove_pm_notifier(device);
- acpi_power_resource_unregister_device(&dev->dev, device->handle);
-
- if (!dev->subordinate)
- goto out;
-
- acpi_pci_irq_del_prt(pci_domain_nr(dev->bus), dev->subordinate->number);
-
- device->ops.bind = NULL;
- device->ops.unbind = NULL;
-
-out:
- pci_dev_put(dev);
- return 0;
-}
-
-static int acpi_pci_bind(struct acpi_device *device)
-{
- acpi_status status;
- acpi_handle handle;
- unsigned char bus;
- struct pci_dev *dev;
-
- dev = acpi_get_pci_dev(device->handle);
- if (!dev)
- return 0;
-
- pci_acpi_add_pm_notifier(device, dev);
- acpi_power_resource_register_device(&dev->dev, device->handle);
- if (device->wakeup.flags.run_wake)
- device_set_run_wake(&dev->dev, true);
-
- /*
- * Install the 'bind' function to facilitate callbacks for
- * children of the P2P bridge.
- */
- if (dev->subordinate) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %04x:%02x:%02x.%d is a PCI bridge\n",
- pci_domain_nr(dev->bus), dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
- device->ops.bind = acpi_pci_bind;
- device->ops.unbind = acpi_pci_unbind;
- }
-
- /*
- * Evaluate and parse _PRT, if exists. This code allows parsing of
- * _PRT objects within the scope of non-bridge devices. Note that
- * _PRTs within the scope of a PCI bridge assume the bridge's
- * subordinate bus number.
- *
- * TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
- */
- status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
- if (ACPI_FAILURE(status))
- goto out;
-
- if (dev->subordinate)
- bus = dev->subordinate->number;
- else
- bus = dev->bus->number;
-
- acpi_pci_irq_add_prt(device->handle, pci_domain_nr(dev->bus), bus);
-
-out:
- pci_dev_put(dev);
- return 0;
-}
-
-int acpi_pci_bind_root(struct acpi_device *device)
-{
- device->ops.bind = acpi_pci_bind;
- device->ops.unbind = acpi_pci_unbind;
-
- return 0;
-}
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index a128082..ab764ed 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -53,23 +53,19 @@
#define ACPI_PCI_LINK_FILE_STATUS "state"
#define ACPI_PCI_LINK_MAX_POSSIBLE 16
-static int acpi_pci_link_add(struct acpi_device *device);
-static int acpi_pci_link_remove(struct acpi_device *device, int type);
+static int acpi_pci_link_add(struct acpi_device *device,
+ const struct acpi_device_id *not_used);
+static void acpi_pci_link_remove(struct acpi_device *device);
static const struct acpi_device_id link_device_ids[] = {
{"PNP0C0F", 0},
{"", 0},
};
-MODULE_DEVICE_TABLE(acpi, link_device_ids);
-static struct acpi_driver acpi_pci_link_driver = {
- .name = "pci_link",
- .class = ACPI_PCI_LINK_CLASS,
+static struct acpi_scan_handler pci_link_handler = {
.ids = link_device_ids,
- .ops = {
- .add = acpi_pci_link_add,
- .remove = acpi_pci_link_remove,
- },
+ .attach = acpi_pci_link_add,
+ .detach = acpi_pci_link_remove,
};
/*
@@ -692,7 +688,8 @@
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_pci_link_add(struct acpi_device *device)
+static int acpi_pci_link_add(struct acpi_device *device,
+ const struct acpi_device_id *not_used)
{
int result;
struct acpi_pci_link *link;
@@ -746,7 +743,7 @@
if (result)
kfree(link);
- return result;
+ return result < 0 ? result : 1;
}
static int acpi_pci_link_resume(struct acpi_pci_link *link)
@@ -766,7 +763,7 @@
}
}
-static int acpi_pci_link_remove(struct acpi_device *device, int type)
+static void acpi_pci_link_remove(struct acpi_device *device)
{
struct acpi_pci_link *link;
@@ -777,7 +774,6 @@
mutex_unlock(&acpi_link_lock);
kfree(link);
- return 0;
}
/*
@@ -874,20 +870,10 @@
.resume = irqrouter_resume,
};
-static int __init irqrouter_init_ops(void)
-{
- if (!acpi_disabled && !acpi_noirq)
- register_syscore_ops(&irqrouter_syscore_ops);
-
- return 0;
-}
-
-device_initcall(irqrouter_init_ops);
-
-static int __init acpi_pci_link_init(void)
+void __init acpi_pci_link_init(void)
{
if (acpi_noirq)
- return 0;
+ return;
if (acpi_irq_balance == -1) {
/* no command line switch: enable balancing in IOAPIC mode */
@@ -896,11 +882,6 @@
else
acpi_irq_balance = 0;
}
-
- if (acpi_bus_register_driver(&acpi_pci_link_driver) < 0)
- return -ENODEV;
-
- return 0;
+ register_syscore_ops(&irqrouter_syscore_ops);
+ acpi_scan_add_handler(&pci_link_handler);
}
-
-subsys_initcall(acpi_pci_link_init);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 7928d4d..b3cc69c 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -45,9 +45,9 @@
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
-static int acpi_pci_root_add(struct acpi_device *device);
-static int acpi_pci_root_remove(struct acpi_device *device, int type);
-static int acpi_pci_root_start(struct acpi_device *device);
+static int acpi_pci_root_add(struct acpi_device *device,
+ const struct acpi_device_id *not_used);
+static void acpi_pci_root_remove(struct acpi_device *device);
#define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \
| OSC_ACTIVE_STATE_PWR_SUPPORT \
@@ -58,17 +58,11 @@
{"PNP0A03", 0},
{"", 0},
};
-MODULE_DEVICE_TABLE(acpi, root_device_ids);
-static struct acpi_driver acpi_pci_root_driver = {
- .name = "pci_root",
- .class = ACPI_PCI_ROOT_CLASS,
+static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
- .ops = {
- .add = acpi_pci_root_add,
- .remove = acpi_pci_root_remove,
- .start = acpi_pci_root_start,
- },
+ .attach = acpi_pci_root_add,
+ .detach = acpi_pci_root_remove,
};
/* Lock to protect both acpi_pci_roots and acpi_pci_drivers lists */
@@ -188,21 +182,6 @@
return AE_OK;
}
-static void acpi_pci_bridge_scan(struct acpi_device *device)
-{
- int status;
- struct acpi_device *child = NULL;
-
- if (device->flags.bus_address)
- if (device->parent && device->parent->ops.bind) {
- status = device->parent->ops.bind(device);
- if (!status) {
- list_for_each_entry(child, &device->children, node)
- acpi_pci_bridge_scan(child);
- }
- }
-}
-
static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
static acpi_status acpi_pci_run_osc(acpi_handle handle,
@@ -445,14 +424,15 @@
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
-static int acpi_pci_root_add(struct acpi_device *device)
+static int acpi_pci_root_add(struct acpi_device *device,
+ const struct acpi_device_id *not_used)
{
unsigned long long segment, bus;
acpi_status status;
int result;
struct acpi_pci_root *root;
acpi_handle handle;
- struct acpi_device *child;
+ struct acpi_pci_driver *driver;
u32 flags, base_flags;
bool is_osc_granted = false;
@@ -603,21 +583,6 @@
goto out_del_root;
}
- /*
- * Attach ACPI-PCI Context
- * -----------------------
- * Thus binding the ACPI and PCI devices.
- */
- result = acpi_pci_bind_root(device);
- if (result)
- goto out_del_root;
-
- /*
- * Scan and bind all _ADR-Based Devices
- */
- list_for_each_entry(child, &device->children, node)
- acpi_pci_bridge_scan(child);
-
/* ASPM setting */
if (is_osc_granted) {
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
@@ -632,24 +597,6 @@
if (device->wakeup.flags.run_wake)
device_set_run_wake(root->bus->bridge, true);
- return 0;
-
-out_del_root:
- mutex_lock(&acpi_pci_root_lock);
- list_del(&root->node);
- mutex_unlock(&acpi_pci_root_lock);
-
- acpi_pci_irq_del_prt(root->segment, root->secondary.start);
-end:
- kfree(root);
- return result;
-}
-
-static int acpi_pci_root_start(struct acpi_device *device)
-{
- struct acpi_pci_root *root = acpi_driver_data(device);
- struct acpi_pci_driver *driver;
-
if (system_state != SYSTEM_BOOTING)
pci_assign_unassigned_bus_resources(root->bus);
@@ -664,11 +611,20 @@
pci_enable_bridges(root->bus);
pci_bus_add_devices(root->bus);
+ return 1;
- return 0;
+out_del_root:
+ mutex_lock(&acpi_pci_root_lock);
+ list_del(&root->node);
+ mutex_unlock(&acpi_pci_root_lock);
+
+ acpi_pci_irq_del_prt(root->segment, root->secondary.start);
+end:
+ kfree(root);
+ return result;
}
-static int acpi_pci_root_remove(struct acpi_device *device, int type)
+static void acpi_pci_root_remove(struct acpi_device *device)
{
acpi_status status;
acpi_handle handle;
@@ -696,21 +652,14 @@
list_del(&root->node);
mutex_unlock(&acpi_pci_root_lock);
kfree(root);
- return 0;
}
-static int __init acpi_pci_root_init(void)
+void __init acpi_pci_root_init(void)
{
acpi_hest_init();
- if (acpi_pci_disabled)
- return 0;
-
- pci_acpi_crs_quirks();
- if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
- return -ENODEV;
-
- return 0;
+ if (!acpi_pci_disabled) {
+ pci_acpi_crs_quirks();
+ acpi_scan_add_handler(&pci_root_handler);
+ }
}
-
-subsys_initcall(acpi_pci_root_init);
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index d22585f..2c630c0 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -50,13 +50,12 @@
ACPI_MODULE_NAME("pci_slot");
#define MY_NAME "pci_slot"
-#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
+#define err(format, arg...) pr_err("%s: " format , MY_NAME , ## arg)
+#define info(format, arg...) pr_info("%s: " format , MY_NAME , ## arg)
#define dbg(format, arg...) \
do { \
if (debug) \
- printk(KERN_DEBUG "%s: " format, \
- MY_NAME , ## arg); \
+ pr_debug("%s: " format, MY_NAME , ## arg); \
} while (0)
#define SLOT_NAME_SIZE 21 /* Inspired by #define in acpiphp.h */
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 6e7b9d5..b820528 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -41,6 +41,7 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/sysfs.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include "sleep.h"
@@ -58,88 +59,121 @@
#define ACPI_POWER_RESOURCE_STATE_ON 0x01
#define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
-static int acpi_power_add(struct acpi_device *device);
-static int acpi_power_remove(struct acpi_device *device, int type);
-
-static const struct acpi_device_id power_device_ids[] = {
- {ACPI_POWER_HID, 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, power_device_ids);
-
-#ifdef CONFIG_PM_SLEEP
-static int acpi_power_resume(struct device *dev);
-#endif
-static SIMPLE_DEV_PM_OPS(acpi_power_pm, NULL, acpi_power_resume);
-
-static struct acpi_driver acpi_power_driver = {
- .name = "power",
- .class = ACPI_POWER_CLASS,
- .ids = power_device_ids,
- .ops = {
- .add = acpi_power_add,
- .remove = acpi_power_remove,
- },
- .drv.pm = &acpi_power_pm,
-};
-
-/*
- * A power managed device
- * A device may rely on multiple power resources.
- * */
-struct acpi_power_managed_device {
- struct device *dev; /* The physical device */
- acpi_handle *handle;
-};
-
-struct acpi_power_resource_device {
- struct acpi_power_managed_device *device;
- struct acpi_power_resource_device *next;
+struct acpi_power_dependent_device {
+ struct list_head node;
+ struct acpi_device *adev;
+ struct work_struct work;
};
struct acpi_power_resource {
- struct acpi_device * device;
- acpi_bus_id name;
+ struct acpi_device device;
+ struct list_head list_node;
+ struct list_head dependent;
+ char *name;
u32 system_level;
u32 order;
unsigned int ref_count;
struct mutex resource_lock;
-
- /* List of devices relying on this power resource */
- struct acpi_power_resource_device *devices;
- struct mutex devices_lock;
};
-static struct list_head acpi_power_resource_list;
+struct acpi_power_resource_entry {
+ struct list_head node;
+ struct acpi_power_resource *resource;
+};
+
+static LIST_HEAD(acpi_power_resource_list);
+static DEFINE_MUTEX(power_resource_list_lock);
/* --------------------------------------------------------------------------
Power Resource Management
-------------------------------------------------------------------------- */
-static int
-acpi_power_get_context(acpi_handle handle,
- struct acpi_power_resource **resource)
+static inline
+struct acpi_power_resource *to_power_resource(struct acpi_device *device)
{
- int result = 0;
- struct acpi_device *device = NULL;
+ return container_of(device, struct acpi_power_resource, device);
+}
+static struct acpi_power_resource *acpi_power_get_context(acpi_handle handle)
+{
+ struct acpi_device *device;
- if (!resource)
- return -ENODEV;
+ if (acpi_bus_get_device(handle, &device))
+ return NULL;
- result = acpi_bus_get_device(handle, &device);
- if (result) {
- printk(KERN_WARNING PREFIX "Getting context [%p]\n", handle);
- return result;
+ return to_power_resource(device);
+}
+
+static int acpi_power_resources_list_add(acpi_handle handle,
+ struct list_head *list)
+{
+ struct acpi_power_resource *resource = acpi_power_get_context(handle);
+ struct acpi_power_resource_entry *entry;
+
+ if (!resource || !list)
+ return -EINVAL;
+
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->resource = resource;
+ if (!list_empty(list)) {
+ struct acpi_power_resource_entry *e;
+
+ list_for_each_entry(e, list, node)
+ if (e->resource->order > resource->order) {
+ list_add_tail(&entry->node, &e->node);
+ return 0;
+ }
}
-
- *resource = acpi_driver_data(device);
- if (!*resource)
- return -ENODEV;
-
+ list_add_tail(&entry->node, list);
return 0;
}
+void acpi_power_resources_list_free(struct list_head *list)
+{
+ struct acpi_power_resource_entry *entry, *e;
+
+ list_for_each_entry_safe(entry, e, list, node) {
+ list_del(&entry->node);
+ kfree(entry);
+ }
+}
+
+int acpi_extract_power_resources(union acpi_object *package, unsigned int start,
+ struct list_head *list)
+{
+ unsigned int i;
+ int err = 0;
+
+ for (i = start; i < package->package.count; i++) {
+ union acpi_object *element = &package->package.elements[i];
+ acpi_handle rhandle;
+
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE) {
+ err = -ENODATA;
+ break;
+ }
+ rhandle = element->reference.handle;
+ if (!rhandle) {
+ err = -ENODEV;
+ break;
+ }
+ err = acpi_add_power_resource(rhandle);
+ if (err)
+ break;
+
+ err = acpi_power_resources_list_add(rhandle, list);
+ if (err)
+ break;
+ }
+ if (err)
+ acpi_power_resources_list_free(list);
+
+ return err;
+}
+
static int acpi_power_get_state(acpi_handle handle, int *state)
{
acpi_status status = AE_OK;
@@ -167,31 +201,23 @@
return 0;
}
-static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
+static int acpi_power_get_list_state(struct list_head *list, int *state)
{
+ struct acpi_power_resource_entry *entry;
int cur_state;
- int i = 0;
if (!list || !state)
return -EINVAL;
/* The state of the list is 'on' IFF all resources are 'on'. */
-
- for (i = 0; i < list->count; i++) {
- struct acpi_power_resource *resource;
- acpi_handle handle = list->handles[i];
+ list_for_each_entry(entry, list, node) {
+ struct acpi_power_resource *resource = entry->resource;
+ acpi_handle handle = resource->device.handle;
int result;
- result = acpi_power_get_context(handle, &resource);
- if (result)
- return result;
-
mutex_lock(&resource->resource_lock);
-
result = acpi_power_get_state(handle, &cur_state);
-
mutex_unlock(&resource->resource_lock);
-
if (result)
return result;
@@ -203,54 +229,52 @@
cur_state ? "on" : "off"));
*state = cur_state;
-
return 0;
}
-/* Resume the device when all power resources in _PR0 are on */
-static void acpi_power_on_device(struct acpi_power_managed_device *device)
+static void acpi_power_resume_dependent(struct work_struct *work)
{
- struct acpi_device *acpi_dev;
- acpi_handle handle = device->handle;
+ struct acpi_power_dependent_device *dep;
+ struct acpi_device_physical_node *pn;
+ struct acpi_device *adev;
int state;
- if (acpi_bus_get_device(handle, &acpi_dev))
+ dep = container_of(work, struct acpi_power_dependent_device, work);
+ adev = dep->adev;
+ if (acpi_power_get_inferred_state(adev, &state))
return;
- if(acpi_power_get_inferred_state(acpi_dev, &state))
+ if (state > ACPI_STATE_D0)
return;
- if (state == ACPI_STATE_D0 && pm_runtime_suspended(device->dev))
- pm_request_resume(device->dev);
+ mutex_lock(&adev->physical_node_lock);
+
+ list_for_each_entry(pn, &adev->physical_node_list, node)
+ pm_request_resume(pn->dev);
+
+ list_for_each_entry(pn, &adev->power_dependent, node)
+ pm_request_resume(pn->dev);
+
+ mutex_unlock(&adev->physical_node_lock);
}
static int __acpi_power_on(struct acpi_power_resource *resource)
{
acpi_status status = AE_OK;
- status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
+ status = acpi_evaluate_object(resource->device.handle, "_ON", NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
- /* Update the power resource's _device_ power state */
- resource->device->power.state = ACPI_STATE_D0;
-
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
resource->name));
return 0;
}
-static int acpi_power_on(acpi_handle handle)
+static int acpi_power_on(struct acpi_power_resource *resource)
{
- int result = 0;
- bool resume_device = false;
- struct acpi_power_resource *resource = NULL;
- struct acpi_power_resource_device *device_list;
-
- result = acpi_power_get_context(handle, &resource);
- if (result)
- return result;
+ int result = 0;;
mutex_lock(&resource->resource_lock);
@@ -260,39 +284,38 @@
resource->name));
} else {
result = __acpi_power_on(resource);
- if (result)
+ if (result) {
resource->ref_count--;
- else
- resume_device = true;
+ } else {
+ struct acpi_power_dependent_device *dep;
+
+ list_for_each_entry(dep, &resource->dependent, node)
+ schedule_work(&dep->work);
+ }
}
mutex_unlock(&resource->resource_lock);
- if (!resume_device)
- return result;
-
- mutex_lock(&resource->devices_lock);
-
- device_list = resource->devices;
- while (device_list) {
- acpi_power_on_device(device_list->device);
- device_list = device_list->next;
- }
-
- mutex_unlock(&resource->devices_lock);
-
return result;
}
-static int acpi_power_off(acpi_handle handle)
+static int __acpi_power_off(struct acpi_power_resource *resource)
+{
+ acpi_status status;
+
+ status = acpi_evaluate_object(resource->device.handle, "_OFF",
+ NULL, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned off\n",
+ resource->name));
+ return 0;
+}
+
+static int acpi_power_off(struct acpi_power_resource *resource)
{
int result = 0;
- acpi_status status = AE_OK;
- struct acpi_power_resource *resource = NULL;
-
- result = acpi_power_get_context(handle, &resource);
- if (result)
- return result;
mutex_lock(&resource->resource_lock);
@@ -307,19 +330,10 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Power resource [%s] still in use\n",
resource->name));
- goto unlock;
- }
-
- status = acpi_evaluate_object(resource->device->handle, "_OFF", NULL, NULL);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
} else {
- /* Update the power resource's _device_ power state */
- resource->device->power.state = ACPI_STATE_D3;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Power resource [%s] turned off\n",
- resource->name));
+ result = __acpi_power_off(resource);
+ if (result)
+ resource->ref_count++;
}
unlock:
@@ -328,148 +342,202 @@
return result;
}
-static void __acpi_power_off_list(struct acpi_handle_list *list, int num_res)
+static int acpi_power_off_list(struct list_head *list)
{
- int i;
-
- for (i = num_res - 1; i >= 0 ; i--)
- acpi_power_off(list->handles[i]);
-}
-
-static void acpi_power_off_list(struct acpi_handle_list *list)
-{
- __acpi_power_off_list(list, list->count);
-}
-
-static int acpi_power_on_list(struct acpi_handle_list *list)
-{
+ struct acpi_power_resource_entry *entry;
int result = 0;
- int i;
- for (i = 0; i < list->count; i++) {
- result = acpi_power_on(list->handles[i]);
- if (result) {
- __acpi_power_off_list(list, i);
- break;
- }
+ list_for_each_entry_reverse(entry, list, node) {
+ result = acpi_power_off(entry->resource);
+ if (result)
+ goto err;
}
+ return 0;
+
+ err:
+ list_for_each_entry_continue(entry, list, node)
+ acpi_power_on(entry->resource);
return result;
}
-static void __acpi_power_resource_unregister_device(struct device *dev,
- acpi_handle res_handle)
+static int acpi_power_on_list(struct list_head *list)
{
- struct acpi_power_resource *resource = NULL;
- struct acpi_power_resource_device *prev, *curr;
+ struct acpi_power_resource_entry *entry;
+ int result = 0;
- if (acpi_power_get_context(res_handle, &resource))
- return;
-
- mutex_lock(&resource->devices_lock);
- prev = NULL;
- curr = resource->devices;
- while (curr) {
- if (curr->device->dev == dev) {
- if (!prev)
- resource->devices = curr->next;
- else
- prev->next = curr->next;
-
- kfree(curr);
- break;
- }
-
- prev = curr;
- curr = curr->next;
+ list_for_each_entry(entry, list, node) {
+ result = acpi_power_on(entry->resource);
+ if (result)
+ goto err;
}
- mutex_unlock(&resource->devices_lock);
-}
-
-/* Unlink dev from all power resources in _PR0 */
-void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle)
-{
- struct acpi_device *acpi_dev;
- struct acpi_handle_list *list;
- int i;
-
- if (!dev || !handle)
- return;
-
- if (acpi_bus_get_device(handle, &acpi_dev))
- return;
-
- list = &acpi_dev->power.states[ACPI_STATE_D0].resources;
-
- for (i = 0; i < list->count; i++)
- __acpi_power_resource_unregister_device(dev,
- list->handles[i]);
-}
-EXPORT_SYMBOL_GPL(acpi_power_resource_unregister_device);
-
-static int __acpi_power_resource_register_device(
- struct acpi_power_managed_device *powered_device, acpi_handle handle)
-{
- struct acpi_power_resource *resource = NULL;
- struct acpi_power_resource_device *power_resource_device;
- int result;
-
- result = acpi_power_get_context(handle, &resource);
- if (result)
- return result;
-
- power_resource_device = kzalloc(
- sizeof(*power_resource_device), GFP_KERNEL);
- if (!power_resource_device)
- return -ENOMEM;
-
- power_resource_device->device = powered_device;
-
- mutex_lock(&resource->devices_lock);
- power_resource_device->next = resource->devices;
- resource->devices = power_resource_device;
- mutex_unlock(&resource->devices_lock);
-
return 0;
+
+ err:
+ list_for_each_entry_continue_reverse(entry, list, node)
+ acpi_power_off(entry->resource);
+
+ return result;
}
-/* Link dev to all power resources in _PR0 */
-int acpi_power_resource_register_device(struct device *dev, acpi_handle handle)
+static void acpi_power_add_dependent(struct acpi_power_resource *resource,
+ struct acpi_device *adev)
{
- struct acpi_device *acpi_dev;
- struct acpi_handle_list *list;
- struct acpi_power_managed_device *powered_device;
- int i, ret;
+ struct acpi_power_dependent_device *dep;
- if (!dev || !handle)
- return -ENODEV;
+ mutex_lock(&resource->resource_lock);
- ret = acpi_bus_get_device(handle, &acpi_dev);
- if (ret || !acpi_dev->power.flags.power_resources)
- return -ENODEV;
+ list_for_each_entry(dep, &resource->dependent, node)
+ if (dep->adev == adev)
+ goto out;
- powered_device = kzalloc(sizeof(*powered_device), GFP_KERNEL);
- if (!powered_device)
- return -ENOMEM;
+ dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+ if (!dep)
+ goto out;
- powered_device->dev = dev;
- powered_device->handle = handle;
+ dep->adev = adev;
+ INIT_WORK(&dep->work, acpi_power_resume_dependent);
+ list_add_tail(&dep->node, &resource->dependent);
- list = &acpi_dev->power.states[ACPI_STATE_D0].resources;
+ out:
+ mutex_unlock(&resource->resource_lock);
+}
- for (i = 0; i < list->count; i++) {
- ret = __acpi_power_resource_register_device(powered_device,
- list->handles[i]);
+static void acpi_power_remove_dependent(struct acpi_power_resource *resource,
+ struct acpi_device *adev)
+{
+ struct acpi_power_dependent_device *dep;
+ struct work_struct *work = NULL;
+ mutex_lock(&resource->resource_lock);
+
+ list_for_each_entry(dep, &resource->dependent, node)
+ if (dep->adev == adev) {
+ list_del(&dep->node);
+ work = &dep->work;
+ break;
+ }
+
+ mutex_unlock(&resource->resource_lock);
+
+ if (work) {
+ cancel_work_sync(work);
+ kfree(dep);
+ }
+}
+
+static struct attribute *attrs[] = {
+ NULL,
+};
+
+static struct attribute_group attr_groups[] = {
+ [ACPI_STATE_D0] = {
+ .name = "power_resources_D0",
+ .attrs = attrs,
+ },
+ [ACPI_STATE_D1] = {
+ .name = "power_resources_D1",
+ .attrs = attrs,
+ },
+ [ACPI_STATE_D2] = {
+ .name = "power_resources_D2",
+ .attrs = attrs,
+ },
+ [ACPI_STATE_D3_HOT] = {
+ .name = "power_resources_D3hot",
+ .attrs = attrs,
+ },
+};
+
+static void acpi_power_hide_list(struct acpi_device *adev, int state)
+{
+ struct acpi_device_power_state *ps = &adev->power.states[state];
+ struct acpi_power_resource_entry *entry;
+
+ if (list_empty(&ps->resources))
+ return;
+
+ list_for_each_entry_reverse(entry, &ps->resources, node) {
+ struct acpi_device *res_dev = &entry->resource->device;
+
+ sysfs_remove_link_from_group(&adev->dev.kobj,
+ attr_groups[state].name,
+ dev_name(&res_dev->dev));
+ }
+ sysfs_remove_group(&adev->dev.kobj, &attr_groups[state]);
+}
+
+static void acpi_power_expose_list(struct acpi_device *adev, int state)
+{
+ struct acpi_device_power_state *ps = &adev->power.states[state];
+ struct acpi_power_resource_entry *entry;
+ int ret;
+
+ if (list_empty(&ps->resources))
+ return;
+
+ ret = sysfs_create_group(&adev->dev.kobj, &attr_groups[state]);
+ if (ret)
+ return;
+
+ list_for_each_entry(entry, &ps->resources, node) {
+ struct acpi_device *res_dev = &entry->resource->device;
+
+ ret = sysfs_add_link_to_group(&adev->dev.kobj,
+ attr_groups[state].name,
+ &res_dev->dev.kobj,
+ dev_name(&res_dev->dev));
if (ret) {
- acpi_power_resource_unregister_device(dev, handle);
+ acpi_power_hide_list(adev, state);
break;
}
}
-
- return ret;
}
-EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
+
+void acpi_power_add_remove_device(struct acpi_device *adev, bool add)
+{
+ struct acpi_device_power_state *ps;
+ struct acpi_power_resource_entry *entry;
+ int state;
+
+ if (!adev->power.flags.power_resources)
+ return;
+
+ ps = &adev->power.states[ACPI_STATE_D0];
+ list_for_each_entry(entry, &ps->resources, node) {
+ struct acpi_power_resource *resource = entry->resource;
+
+ if (add)
+ acpi_power_add_dependent(resource, adev);
+ else
+ acpi_power_remove_dependent(resource, adev);
+ }
+
+ for (state = ACPI_STATE_D0; state <= ACPI_STATE_D3_HOT; state++) {
+ if (add)
+ acpi_power_expose_list(adev, state);
+ else
+ acpi_power_hide_list(adev, state);
+ }
+}
+
+int acpi_power_min_system_level(struct list_head *list)
+{
+ struct acpi_power_resource_entry *entry;
+ int system_level = 5;
+
+ list_for_each_entry(entry, list, node) {
+ struct acpi_power_resource *resource = entry->resource;
+
+ if (system_level > resource->system_level)
+ system_level = resource->system_level;
+ }
+ return system_level;
+}
+
+/* --------------------------------------------------------------------------
+ Device Power Management
+ -------------------------------------------------------------------------- */
/**
* acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in
@@ -542,7 +610,7 @@
*/
int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
{
- int i, err = 0;
+ int err = 0;
if (!dev || !dev->wakeup.flags.valid)
return -EINVAL;
@@ -552,24 +620,17 @@
if (dev->wakeup.prepare_count++)
goto out;
- /* Open power resource */
- for (i = 0; i < dev->wakeup.resources.count; i++) {
- int ret = acpi_power_on(dev->wakeup.resources.handles[i]);
- if (ret) {
- printk(KERN_ERR PREFIX "Transition power state\n");
- dev->wakeup.flags.valid = 0;
- err = -ENODEV;
- goto err_out;
- }
+ err = acpi_power_on_list(&dev->wakeup.resources);
+ if (err) {
+ dev_err(&dev->dev, "Cannot turn wakeup power resources on\n");
+ dev->wakeup.flags.valid = 0;
+ } else {
+ /*
+ * Passing 3 as the third argument below means the device may be
+ * put into arbitrary power state afterward.
+ */
+ err = acpi_device_sleep_wake(dev, 1, sleep_state, 3);
}
-
- /*
- * Passing 3 as the third argument below means the device may be placed
- * in arbitrary power state afterwards.
- */
- err = acpi_device_sleep_wake(dev, 1, sleep_state, 3);
-
- err_out:
if (err)
dev->wakeup.prepare_count = 0;
@@ -586,7 +647,7 @@
*/
int acpi_disable_wakeup_device_power(struct acpi_device *dev)
{
- int i, err = 0;
+ int err = 0;
if (!dev || !dev->wakeup.flags.valid)
return -EINVAL;
@@ -607,15 +668,10 @@
if (err)
goto out;
- /* Close power resource */
- for (i = 0; i < dev->wakeup.resources.count; i++) {
- int ret = acpi_power_off(dev->wakeup.resources.handles[i]);
- if (ret) {
- printk(KERN_ERR PREFIX "Transition power state\n");
- dev->wakeup.flags.valid = 0;
- err = -ENODEV;
- goto out;
- }
+ err = acpi_power_off_list(&dev->wakeup.resources);
+ if (err) {
+ dev_err(&dev->dev, "Cannot turn wakeup power resources off\n");
+ dev->wakeup.flags.valid = 0;
}
out:
@@ -623,14 +679,9 @@
return err;
}
-/* --------------------------------------------------------------------------
- Device Power Management
- -------------------------------------------------------------------------- */
-
int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
{
int result = 0;
- struct acpi_handle_list *list = NULL;
int list_state = 0;
int i = 0;
@@ -642,8 +693,9 @@
* required for a given D-state are 'on'.
*/
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
- list = &device->power.states[i].resources;
- if (list->count < 1)
+ struct list_head *list = &device->power.states[i].resources;
+
+ if (list_empty(list))
continue;
result = acpi_power_get_list_state(list, &list_state);
@@ -662,7 +714,7 @@
int acpi_power_on_resources(struct acpi_device *device, int state)
{
- if (!device || state < ACPI_STATE_D0 || state > ACPI_STATE_D3)
+ if (!device || state < ACPI_STATE_D0 || state > ACPI_STATE_D3_HOT)
return -EINVAL;
return acpi_power_on_list(&device->power.states[state].resources);
@@ -675,7 +727,7 @@
if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
return -EINVAL;
- if (device->power.state == state)
+ if (device->power.state == state || !device->flags.power_manageable)
return 0;
if ((device->power.state < ACPI_STATE_D0)
@@ -703,118 +755,126 @@
return result;
}
-/* --------------------------------------------------------------------------
- Driver Interface
- -------------------------------------------------------------------------- */
-
-static int acpi_power_add(struct acpi_device *device)
+static void acpi_release_power_resource(struct device *dev)
{
- int result = 0, state;
- acpi_status status = AE_OK;
- struct acpi_power_resource *resource = NULL;
+ struct acpi_device *device = to_acpi_device(dev);
+ struct acpi_power_resource *resource;
+
+ resource = container_of(device, struct acpi_power_resource, device);
+
+ mutex_lock(&power_resource_list_lock);
+ list_del(&resource->list_node);
+ mutex_unlock(&power_resource_list_lock);
+
+ acpi_free_ids(device);
+ kfree(resource);
+}
+
+static ssize_t acpi_power_in_use_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf) {
+ struct acpi_power_resource *resource;
+
+ resource = to_power_resource(to_acpi_device(dev));
+ return sprintf(buf, "%u\n", !!resource->ref_count);
+}
+static DEVICE_ATTR(resource_in_use, 0444, acpi_power_in_use_show, NULL);
+
+static void acpi_power_sysfs_remove(struct acpi_device *device)
+{
+ device_remove_file(&device->dev, &dev_attr_resource_in_use);
+}
+
+int acpi_add_power_resource(acpi_handle handle)
+{
+ struct acpi_power_resource *resource;
+ struct acpi_device *device = NULL;
union acpi_object acpi_object;
struct acpi_buffer buffer = { sizeof(acpi_object), &acpi_object };
+ acpi_status status;
+ int state, result = -ENODEV;
+ acpi_bus_get_device(handle, &device);
+ if (device)
+ return 0;
- if (!device)
- return -EINVAL;
-
- resource = kzalloc(sizeof(struct acpi_power_resource), GFP_KERNEL);
+ resource = kzalloc(sizeof(*resource), GFP_KERNEL);
if (!resource)
return -ENOMEM;
- resource->device = device;
+ device = &resource->device;
+ acpi_init_device_object(device, handle, ACPI_BUS_TYPE_POWER,
+ ACPI_STA_DEFAULT);
mutex_init(&resource->resource_lock);
- mutex_init(&resource->devices_lock);
- strcpy(resource->name, device->pnp.bus_id);
+ INIT_LIST_HEAD(&resource->dependent);
+ resource->name = device->pnp.bus_id;
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
- device->driver_data = resource;
+ device->power.state = ACPI_STATE_UNKNOWN;
/* Evalute the object to get the system level and resource order. */
- status = acpi_evaluate_object(device->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ goto err;
+
resource->system_level = acpi_object.power_resource.system_level;
resource->order = acpi_object.power_resource.resource_order;
- result = acpi_power_get_state(device->handle, &state);
+ result = acpi_power_get_state(handle, &state);
if (result)
- goto end;
-
- switch (state) {
- case ACPI_POWER_RESOURCE_STATE_ON:
- device->power.state = ACPI_STATE_D0;
- break;
- case ACPI_POWER_RESOURCE_STATE_OFF:
- device->power.state = ACPI_STATE_D3;
- break;
- default:
- device->power.state = ACPI_STATE_UNKNOWN;
- break;
- }
+ goto err;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device),
acpi_device_bid(device), state ? "on" : "off");
- end:
+ device->flags.match_driver = true;
+ result = acpi_device_add(device, acpi_release_power_resource);
if (result)
- kfree(resource);
+ goto err;
- return result;
-}
+ if (!device_create_file(&device->dev, &dev_attr_resource_in_use))
+ device->remove = acpi_power_sysfs_remove;
-static int acpi_power_remove(struct acpi_device *device, int type)
-{
- struct acpi_power_resource *resource;
-
- if (!device)
- return -EINVAL;
-
- resource = acpi_driver_data(device);
- if (!resource)
- return -EINVAL;
-
- kfree(resource);
-
+ mutex_lock(&power_resource_list_lock);
+ list_add(&resource->list_node, &acpi_power_resource_list);
+ mutex_unlock(&power_resource_list_lock);
+ acpi_device_add_finalize(device);
return 0;
+
+ err:
+ acpi_release_power_resource(&device->dev);
+ return result;
}
-#ifdef CONFIG_PM_SLEEP
-static int acpi_power_resume(struct device *dev)
+#ifdef CONFIG_ACPI_SLEEP
+void acpi_resume_power_resources(void)
{
- int result = 0, state;
- struct acpi_device *device;
struct acpi_power_resource *resource;
- if (!dev)
- return -EINVAL;
+ mutex_lock(&power_resource_list_lock);
- device = to_acpi_device(dev);
- resource = acpi_driver_data(device);
- if (!resource)
- return -EINVAL;
+ list_for_each_entry(resource, &acpi_power_resource_list, list_node) {
+ int result, state;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->resource_lock);
- result = acpi_power_get_state(device->handle, &state);
- if (result)
- goto unlock;
+ result = acpi_power_get_state(resource->device.handle, &state);
+ if (result)
+ continue;
- if (state == ACPI_POWER_RESOURCE_STATE_OFF && resource->ref_count)
- result = __acpi_power_on(resource);
+ if (state == ACPI_POWER_RESOURCE_STATE_OFF
+ && resource->ref_count) {
+ dev_info(&resource->device.dev, "Turning ON\n");
+ __acpi_power_on(resource);
+ } else if (state == ACPI_POWER_RESOURCE_STATE_ON
+ && !resource->ref_count) {
+ dev_info(&resource->device.dev, "Turning OFF\n");
+ __acpi_power_off(resource);
+ }
- unlock:
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->resource_lock);
+ }
- return result;
+ mutex_unlock(&power_resource_list_lock);
}
#endif
-
-int __init acpi_power_init(void)
-{
- INIT_LIST_HEAD(&acpi_power_resource_list);
- return acpi_bus_register_driver(&acpi_power_driver);
-}
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index ef98796..52ce767 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -311,11 +311,12 @@
dev->pnp.bus_id,
(u32) dev->wakeup.sleep_state);
- if (!dev->physical_node_count)
+ if (!dev->physical_node_count) {
seq_printf(seq, "%c%-8s\n",
- dev->wakeup.flags.run_wake ?
- '*' : ' ', "disabled");
- else {
+ dev->wakeup.flags.run_wake ? '*' : ' ',
+ device_may_wakeup(&dev->dev) ?
+ "enabled" : "disabled");
+ } else {
struct device *ldev;
list_for_each_entry(entry, &dev->physical_node_list,
node) {
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index e83311b..cbf1f12 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -81,7 +81,7 @@
MODULE_LICENSE("GPL");
static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device, int type);
+static int acpi_processor_remove(struct acpi_device *device);
static void acpi_processor_notify(struct acpi_device *device, u32 event);
static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
@@ -610,7 +610,7 @@
return result;
}
-static int acpi_processor_remove(struct acpi_device *device, int type)
+static int acpi_processor_remove(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
@@ -623,7 +623,7 @@
if (pr->id >= nr_cpu_ids)
goto free;
- if (type == ACPI_BUS_REMOVAL_EJECT) {
+ if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) {
if (acpi_processor_handle_eject(pr))
return -EINVAL;
}
@@ -677,36 +677,17 @@
return 0;
}
-static
-int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
-{
- acpi_handle phandle;
- struct acpi_device *pdev;
-
-
- if (acpi_get_parent(handle, &phandle)) {
- return -ENODEV;
- }
-
- if (acpi_bus_get_device(phandle, &pdev)) {
- return -ENODEV;
- }
-
- if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
- return -ENODEV;
- }
-
- return 0;
-}
-
static void acpi_processor_hotplug_notify(acpi_handle handle,
u32 event, void *data)
{
struct acpi_device *device = NULL;
struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
+ acpi_status status;
int result;
+ acpi_scan_lock_acquire();
+
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
@@ -721,12 +702,16 @@
if (!acpi_bus_get_device(handle, &device))
break;
- result = acpi_processor_device_add(handle, &device);
+ result = acpi_bus_scan(handle);
if (result) {
acpi_handle_err(handle, "Unable to add the device\n");
break;
}
-
+ result = acpi_bus_get_device(handle, &device);
+ if (result) {
+ acpi_handle_err(handle, "Missing device object\n");
+ break;
+ }
ost_code = ACPI_OST_SC_SUCCESS;
break;
@@ -751,25 +736,32 @@
break;
}
- ej_event->handle = handle;
+ get_device(&device->dev);
+ ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
- (void *)ej_event);
-
- /* eject is performed asynchronously */
- return;
+ /* The eject is carried out asynchronously. */
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ ej_event);
+ if (ACPI_FAILURE(status)) {
+ put_device(&device->dev);
+ kfree(ej_event);
+ break;
+ }
+ goto out;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
/* non-hotplug event; possibly handled by other handler */
- return;
+ goto out;
}
/* Inform firmware that the hotplug operation has completed */
(void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
- return;
+
+ out:
+ acpi_scan_lock_release();
}
static acpi_status is_processor_device(acpi_handle handle)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index ed9a1cc..fc95308 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -28,19 +28,12 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
-#include <linux/moduleparam.h>
-#include <linux/sched.h> /* need_resched() */
-#include <linux/pm_qos.h>
+#include <linux/sched.h> /* need_resched() */
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
-#include <linux/irqflags.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
@@ -52,22 +45,14 @@
#include <asm/apic.h>
#endif
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
-#include <asm/processor.h>
#define PREFIX "ACPI: "
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_idle");
-#define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY)
-#define C2_OVERHEAD 1 /* 1us */
-#define C3_OVERHEAD 1 /* 1us */
-#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0000);
@@ -81,10 +66,11 @@
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
+static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+
static int disabled_by_idle_boot_param(void)
{
return boot_option_idle_override == IDLE_POLL ||
- boot_option_idle_override == IDLE_FORCE_MWAIT ||
boot_option_idle_override == IDLE_HALT;
}
@@ -736,8 +722,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
+ struct acpi_processor_cx *cx = acpi_cstate[index];
pr = __this_cpu_read(processors);
@@ -760,8 +745,7 @@
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
+ struct acpi_processor_cx *cx = acpi_cstate[index];
ACPI_FLUSH_CPU_CACHE();
@@ -791,8 +775,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
+ struct acpi_processor_cx *cx = acpi_cstate[index];
pr = __this_cpu_read(processors);
@@ -850,8 +833,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
+ struct acpi_processor_cx *cx = acpi_cstate[index];
pr = __this_cpu_read(processors);
@@ -943,13 +925,13 @@
* device i.e. per-cpu data
*
* @pr: the ACPI processor
+ * @dev : the cpuidle device
*/
-static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
+static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
+ struct cpuidle_device *dev)
{
int i, count = CPUIDLE_DRIVER_STATE_START;
struct acpi_processor_cx *cx;
- struct cpuidle_state_usage *state_usage;
- struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
if (!pr->flags.power_setup_done)
return -EINVAL;
@@ -968,7 +950,6 @@
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
- state_usage = &dev->states_usage[count];
if (!cx->valid)
continue;
@@ -979,8 +960,7 @@
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
-
- cpuidle_set_statedata(state_usage, cx);
+ acpi_cstate[count] = cx;
count++;
if (count == CPUIDLE_STATE_MAX)
@@ -1104,7 +1084,7 @@
cpuidle_disable_device(dev);
acpi_processor_get_power_info(pr);
if (pr->flags.power) {
- acpi_processor_setup_cpuidle_cx(pr);
+ acpi_processor_setup_cpuidle_cx(pr, dev);
ret = cpuidle_enable_device(dev);
}
cpuidle_resume_and_unlock();
@@ -1162,8 +1142,8 @@
continue;
acpi_processor_get_power_info(_pr);
if (_pr->flags.power) {
- acpi_processor_setup_cpuidle_cx(_pr);
dev = per_cpu(acpi_cpuidle_device, cpu);
+ acpi_processor_setup_cpuidle_cx(_pr, dev);
cpuidle_enable_device(dev);
}
}
@@ -1232,7 +1212,7 @@
return -ENOMEM;
per_cpu(acpi_cpuidle_device, pr->id) = dev;
- acpi_processor_setup_cpuidle_cx(pr);
+ acpi_processor_setup_cpuidle_cx(pr, dev);
/* Register per-cpu cpuidle_device. Cpuidle driver
* must already be registered before registering device
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index ff0740e..e523245 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -130,7 +130,7 @@
#define to_acpi_sbs(x) container_of(x, struct acpi_sbs, charger)
-static int acpi_sbs_remove(struct acpi_device *device, int type);
+static int acpi_sbs_remove(struct acpi_device *device);
static int acpi_battery_get_state(struct acpi_battery *battery);
static inline int battery_scale(int log)
@@ -949,11 +949,11 @@
acpi_smbus_register_callback(sbs->hc, acpi_sbs_callback, sbs);
end:
if (result)
- acpi_sbs_remove(device, 0);
+ acpi_sbs_remove(device);
return result;
}
-static int acpi_sbs_remove(struct acpi_device *device, int type)
+static int acpi_sbs_remove(struct acpi_device *device)
{
struct acpi_sbs *sbs;
int id;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index cf6129a..b78bc60 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -33,7 +33,7 @@
};
static int acpi_smbus_hc_add(struct acpi_device *device);
-static int acpi_smbus_hc_remove(struct acpi_device *device, int type);
+static int acpi_smbus_hc_remove(struct acpi_device *device);
static const struct acpi_device_id sbs_device_ids[] = {
{"ACPI0001", 0},
@@ -296,7 +296,7 @@
extern void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit);
-static int acpi_smbus_hc_remove(struct acpi_device *device, int type)
+static int acpi_smbus_hc_remove(struct acpi_device *device)
{
struct acpi_smb_hc *hc;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index c88be6c..daee749 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -29,29 +29,10 @@
static const char *dummy_hid = "device";
-/*
- * The following ACPI IDs are known to be suitable for representing as
- * platform devices.
- */
-static const struct acpi_device_id acpi_platform_device_ids[] = {
-
- { "PNP0D40" },
-
- /* Haswell LPSS devices */
- { "INT33C0", 0 },
- { "INT33C1", 0 },
- { "INT33C2", 0 },
- { "INT33C3", 0 },
- { "INT33C4", 0 },
- { "INT33C5", 0 },
- { "INT33C6", 0 },
- { "INT33C7", 0 },
-
- { }
-};
-
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
+static DEFINE_MUTEX(acpi_scan_lock);
+static LIST_HEAD(acpi_scan_handlers_list);
DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
@@ -61,6 +42,27 @@
struct list_head node;
};
+void acpi_scan_lock_acquire(void)
+{
+ mutex_lock(&acpi_scan_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_scan_lock_acquire);
+
+void acpi_scan_lock_release(void)
+{
+ mutex_unlock(&acpi_scan_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_scan_lock_release);
+
+int acpi_scan_add_handler(struct acpi_scan_handler *handler)
+{
+ if (!handler || !handler->attach)
+ return -EINVAL;
+
+ list_add_tail(&handler->list_node, &acpi_scan_handlers_list);
+ return 0;
+}
+
/*
* Creates hid/cid(s) string needed for modalias and uevent
* e.g. on a device with hid:IBM0001 and cid:ACPI0001 you get:
@@ -115,39 +117,32 @@
*/
void acpi_bus_hot_remove_device(void *context)
{
- struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
- struct acpi_device *device;
- acpi_handle handle = ej_event->handle;
+ struct acpi_eject_event *ej_event = context;
+ struct acpi_device *device = ej_event->device;
+ acpi_handle handle = device->handle;
acpi_handle temp;
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status = AE_OK;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
- if (acpi_bus_get_device(handle, &device))
- goto err_out;
+ mutex_lock(&acpi_scan_lock);
- if (!device)
- goto err_out;
+ /* If there is no handle, the device node has been unregistered. */
+ if (!device->handle) {
+ dev_dbg(&device->dev, "ACPI handle missing\n");
+ put_device(&device->dev);
+ goto out;
+ }
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
- if (acpi_bus_trim(device, 1)) {
- printk(KERN_ERR PREFIX
- "Removing device failed\n");
- goto err_out;
- }
-
- /* device has been freed */
+ acpi_bus_trim(device);
+ /* Device node has been unregistered. */
+ put_device(&device->dev);
device = NULL;
- /* power off device */
- status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
- printk(KERN_WARNING PREFIX
- "Power-off device failed\n");
-
if (ACPI_SUCCESS(acpi_get_handle(handle, "_LCK", &temp))) {
arg_list.count = 1;
arg_list.pointer = &arg;
@@ -167,23 +162,46 @@
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND)
- printk(KERN_WARNING PREFIX
- "Eject device failed\n");
- goto err_out;
+ acpi_handle_warn(handle, "Eject failed\n");
+
+ /* Tell the firmware the hot-remove operation has failed. */
+ acpi_evaluate_hotplug_ost(handle, ej_event->event,
+ ost_code, NULL);
}
- kfree(context);
- return;
-
-err_out:
- /* Inform firmware the hot-remove operation has completed w/ error */
- (void) acpi_evaluate_hotplug_ost(handle,
- ej_event->event, ost_code, NULL);
+ out:
+ mutex_unlock(&acpi_scan_lock);
kfree(context);
return;
}
EXPORT_SYMBOL(acpi_bus_hot_remove_device);
+static ssize_t real_power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *adev = to_acpi_device(dev);
+ int state;
+ int ret;
+
+ ret = acpi_device_get_power(adev, &state);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%s\n", acpi_power_state_string(state));
+}
+
+static DEVICE_ATTR(real_power_state, 0444, real_power_state_show, NULL);
+
+static ssize_t power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *adev = to_acpi_device(dev);
+
+ return sprintf(buf, "%s\n", acpi_power_state_string(adev->power.state));
+}
+
+static DEVICE_ATTR(power_state, 0444, power_state_show, NULL);
+
static ssize_t
acpi_eject_store(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
@@ -197,12 +215,10 @@
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
}
-#ifndef FORCE_EJECT
- if (acpi_device->driver == NULL) {
+ if (!acpi_device->driver && !acpi_device->handler) {
ret = -ENODEV;
goto err;
}
-#endif
status = acpi_get_type(acpi_device->handle, &type);
if (ACPI_FAILURE(status) || (!acpi_device->flags.ejectable)) {
ret = -ENODEV;
@@ -215,7 +231,8 @@
goto err;
}
- ej_event->handle = acpi_device->handle;
+ get_device(&acpi_device->dev);
+ ej_event->device = acpi_device;
if (acpi_device->flags.eject_pending) {
/* event originated from ACPI eject notification */
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
@@ -223,11 +240,15 @@
} else {
/* event originated from user */
ej_event->event = ACPI_OST_EC_OSPM_EJECT;
- (void) acpi_evaluate_hotplug_ost(ej_event->handle,
+ (void) acpi_evaluate_hotplug_ost(acpi_device->handle,
ej_event->event, ACPI_OST_SC_EJECT_IN_PROGRESS, NULL);
}
- acpi_os_hotplug_execute(acpi_bus_hot_remove_device, (void *)ej_event);
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, ej_event);
+ if (ACPI_FAILURE(status)) {
+ put_device(&acpi_device->dev);
+ kfree(ej_event);
+ }
err:
return ret;
}
@@ -375,8 +396,22 @@
* hot-removal function from userland.
*/
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
- if (ACPI_SUCCESS(status))
+ if (ACPI_SUCCESS(status)) {
result = device_create_file(&dev->dev, &dev_attr_eject);
+ if (result)
+ return result;
+ }
+
+ if (dev->flags.power_manageable) {
+ result = device_create_file(&dev->dev, &dev_attr_power_state);
+ if (result)
+ return result;
+
+ if (dev->power.flags.power_resources)
+ result = device_create_file(&dev->dev,
+ &dev_attr_real_power_state);
+ }
+
end:
return result;
}
@@ -386,6 +421,13 @@
acpi_status status;
acpi_handle temp;
+ if (dev->flags.power_manageable) {
+ device_remove_file(&dev->dev, &dev_attr_power_state);
+ if (dev->power.flags.power_resources)
+ device_remove_file(&dev->dev,
+ &dev_attr_real_power_state);
+ }
+
/*
* If device has _STR, remove 'description' file
*/
@@ -454,9 +496,9 @@
const struct device *dev)
{
struct acpi_device *adev;
+ acpi_handle handle = ACPI_HANDLE(dev);
- if (!ids || !ACPI_HANDLE(dev)
- || ACPI_FAILURE(acpi_bus_get_device(ACPI_HANDLE(dev), &adev)))
+ if (!ids || !handle || acpi_bus_get_device(handle, &adev))
return NULL;
return __acpi_match_device(adev, ids);
@@ -470,7 +512,7 @@
}
EXPORT_SYMBOL(acpi_match_device_ids);
-static void acpi_free_ids(struct acpi_device *device)
+void acpi_free_ids(struct acpi_device *device)
{
struct acpi_hardware_id *id, *tmp;
@@ -478,6 +520,23 @@
kfree(id->id);
kfree(id);
}
+ kfree(device->pnp.unique_id);
+}
+
+static void acpi_free_power_resources_lists(struct acpi_device *device)
+{
+ int i;
+
+ if (device->wakeup.flags.valid)
+ acpi_power_resources_list_free(&device->wakeup.resources);
+
+ if (!device->flags.power_manageable)
+ return;
+
+ for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
+ struct acpi_device_power_state *ps = &device->power.states[i];
+ acpi_power_resources_list_free(&ps->resources);
+ }
}
static void acpi_device_release(struct device *dev)
@@ -485,7 +544,7 @@
struct acpi_device *acpi_dev = to_acpi_device(dev);
acpi_free_ids(acpi_dev);
- kfree(acpi_dev->pnp.unique_id);
+ acpi_free_power_resources_lists(acpi_dev);
kfree(acpi_dev);
}
@@ -494,7 +553,8 @@
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
- return !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
+ return acpi_dev->flags.match_driver
+ && !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
}
static int acpi_device_uevent(struct device *dev, struct kobj_uevent_env *env)
@@ -570,7 +630,6 @@
}
static int acpi_bus_driver_init(struct acpi_device *, struct acpi_driver *);
-static int acpi_start_single_object(struct acpi_device *);
static int acpi_device_probe(struct device * dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
@@ -579,15 +638,13 @@
ret = acpi_bus_driver_init(acpi_dev, acpi_drv);
if (!ret) {
- if (acpi_dev->bus_ops.acpi_op_start)
- acpi_start_single_object(acpi_dev);
-
if (acpi_drv->ops.notify) {
ret = acpi_device_install_notify_handler(acpi_dev);
if (ret) {
if (acpi_drv->ops.remove)
- acpi_drv->ops.remove(acpi_dev,
- acpi_dev->removal_type);
+ acpi_drv->ops.remove(acpi_dev);
+ acpi_dev->driver = NULL;
+ acpi_dev->driver_data = NULL;
return ret;
}
}
@@ -609,7 +666,7 @@
if (acpi_drv->ops.notify)
acpi_device_remove_notify_handler(acpi_dev);
if (acpi_drv->ops.remove)
- acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
+ acpi_drv->ops.remove(acpi_dev);
}
acpi_dev->driver = NULL;
acpi_dev->driver_data = NULL;
@@ -626,12 +683,25 @@
.uevent = acpi_device_uevent,
};
-static int acpi_device_register(struct acpi_device *device)
+int acpi_device_add(struct acpi_device *device,
+ void (*release)(struct device *))
{
int result;
struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
int found = 0;
+ if (device->handle) {
+ acpi_status status;
+
+ status = acpi_attach_data(device->handle, acpi_bus_data_handler,
+ device);
+ if (ACPI_FAILURE(status)) {
+ acpi_handle_err(device->handle,
+ "Unable to attach device data\n");
+ return -ENODEV;
+ }
+ }
+
/*
* Linkage
* -------
@@ -642,11 +712,13 @@
INIT_LIST_HEAD(&device->wakeup_list);
INIT_LIST_HEAD(&device->physical_node_list);
mutex_init(&device->physical_node_lock);
+ INIT_LIST_HEAD(&device->power_dependent);
new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
if (!new_bus_id) {
- printk(KERN_ERR PREFIX "Memory allocation error\n");
- return -ENOMEM;
+ pr_err(PREFIX "Memory allocation error\n");
+ result = -ENOMEM;
+ goto err_detach;
}
mutex_lock(&acpi_device_lock);
@@ -681,11 +753,11 @@
if (device->parent)
device->dev.parent = &device->parent->dev;
device->dev.bus = &acpi_bus_type;
- device->dev.release = &acpi_device_release;
- result = device_register(&device->dev);
+ device->dev.release = release;
+ result = device_add(&device->dev);
if (result) {
dev_err(&device->dev, "Error registering device\n");
- goto end;
+ goto err;
}
result = acpi_device_setup_files(device);
@@ -695,16 +767,20 @@
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
-end:
+
+ err:
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
list_del(&device->wakeup_list);
mutex_unlock(&acpi_device_lock);
+
+ err_detach:
+ acpi_detach_data(device->handle, acpi_bus_data_handler);
return result;
}
-static void acpi_device_unregister(struct acpi_device *device, int type)
+static void acpi_device_unregister(struct acpi_device *device)
{
mutex_lock(&acpi_device_lock);
if (device->parent)
@@ -715,8 +791,20 @@
acpi_detach_data(device->handle, acpi_bus_data_handler);
+ acpi_power_add_remove_device(device, false);
acpi_device_remove_files(device);
- device_unregister(&device->dev);
+ if (device->remove)
+ device->remove(device);
+
+ device_del(&device->dev);
+ /*
+ * Transition the device to D3cold to drop the reference counts of all
+ * power resources the device depends on and turn off the ones that have
+ * no more references.
+ */
+ acpi_device_set_power(device, ACPI_STATE_D3_COLD);
+ device->handle = NULL;
+ put_device(&device->dev);
}
/* --------------------------------------------------------------------------
@@ -760,24 +848,6 @@
return 0;
}
-static int acpi_start_single_object(struct acpi_device *device)
-{
- int result = 0;
- struct acpi_driver *driver;
-
-
- if (!(driver = device->driver))
- return 0;
-
- if (driver->ops.start) {
- result = driver->ops.start(device);
- if (result && driver->ops.remove)
- driver->ops.remove(device, ACPI_BUS_REMOVAL_NORMAL);
- }
-
- return result;
-}
-
/**
* acpi_bus_register_driver - register a driver with the ACPI bus
* @driver: driver being registered
@@ -821,29 +891,23 @@
-------------------------------------------------------------------------- */
static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
{
+ struct acpi_device *device = NULL;
acpi_status status;
- int ret;
- struct acpi_device *device;
/*
* Fixed hardware devices do not appear in the namespace and do not
* have handles, but we fabricate acpi_devices for them, so we have
* to deal with them specially.
*/
- if (handle == NULL)
+ if (!handle)
return acpi_root;
do {
status = acpi_get_parent(handle, &handle);
- if (status == AE_NULL_ENTRY)
- return NULL;
if (ACPI_FAILURE(status))
- return acpi_root;
-
- ret = acpi_bus_get_device(handle, &device);
- if (ret == 0)
- return device;
- } while (1);
+ return status == AE_NULL_ENTRY ? NULL : acpi_root;
+ } while (acpi_bus_get_device(handle, &device));
+ return device;
}
acpi_status
@@ -877,52 +941,43 @@
return;
}
-static int acpi_bus_get_perf_flags(struct acpi_device *device)
-{
- device->performance.state = ACPI_STATE_UNKNOWN;
- return 0;
-}
-
-static acpi_status
-acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
- struct acpi_device_wakeup *wakeup)
+static int acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
+ struct acpi_device_wakeup *wakeup)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *package = NULL;
union acpi_object *element = NULL;
acpi_status status;
- int i = 0;
+ int err = -ENODATA;
if (!wakeup)
- return AE_BAD_PARAMETER;
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&wakeup->resources);
/* _PRW */
status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
- return status;
+ return err;
}
package = (union acpi_object *)buffer.pointer;
- if (!package || (package->package.count < 2)) {
- status = AE_BAD_DATA;
+ if (!package || package->package.count < 2)
goto out;
- }
element = &(package->package.elements[0]);
- if (!element) {
- status = AE_BAD_DATA;
+ if (!element)
goto out;
- }
+
if (element->type == ACPI_TYPE_PACKAGE) {
if ((element->package.count < 2) ||
(element->package.elements[0].type !=
ACPI_TYPE_LOCAL_REFERENCE)
- || (element->package.elements[1].type != ACPI_TYPE_INTEGER)) {
- status = AE_BAD_DATA;
+ || (element->package.elements[1].type != ACPI_TYPE_INTEGER))
goto out;
- }
+
wakeup->gpe_device =
element->package.elements[0].reference.handle;
wakeup->gpe_number =
@@ -931,38 +986,35 @@
wakeup->gpe_device = NULL;
wakeup->gpe_number = element->integer.value;
} else {
- status = AE_BAD_DATA;
goto out;
}
element = &(package->package.elements[1]);
- if (element->type != ACPI_TYPE_INTEGER) {
- status = AE_BAD_DATA;
+ if (element->type != ACPI_TYPE_INTEGER)
goto out;
- }
+
wakeup->sleep_state = element->integer.value;
- if ((package->package.count - 2) > ACPI_MAX_HANDLES) {
- status = AE_NO_MEMORY;
+ err = acpi_extract_power_resources(package, 2, &wakeup->resources);
+ if (err)
goto out;
- }
- wakeup->resources.count = package->package.count - 2;
- for (i = 0; i < wakeup->resources.count; i++) {
- element = &(package->package.elements[i + 2]);
- if (element->type != ACPI_TYPE_LOCAL_REFERENCE) {
- status = AE_BAD_DATA;
- goto out;
+
+ if (!list_empty(&wakeup->resources)) {
+ int sleep_state;
+
+ sleep_state = acpi_power_min_system_level(&wakeup->resources);
+ if (sleep_state < wakeup->sleep_state) {
+ acpi_handle_warn(handle, "Overriding _PRW sleep state "
+ "(S%d) by S%d from power resources\n",
+ (int)wakeup->sleep_state, sleep_state);
+ wakeup->sleep_state = sleep_state;
}
-
- wakeup->resources.handles[i] = element->reference.handle;
}
-
acpi_setup_gpe_for_wake(handle, wakeup->gpe_device, wakeup->gpe_number);
out:
kfree(buffer.pointer);
-
- return status;
+ return err;
}
static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
@@ -1002,17 +1054,17 @@
{
acpi_handle temp;
acpi_status status = 0;
- int psw_error;
+ int err;
/* Presence of _PRW indicates wake capable */
status = acpi_get_handle(device->handle, "_PRW", &temp);
if (ACPI_FAILURE(status))
return;
- status = acpi_bus_extract_wakeup_device_power_package(device->handle,
- &device->wakeup);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package"));
+ err = acpi_bus_extract_wakeup_device_power_package(device->handle,
+ &device->wakeup);
+ if (err) {
+ dev_err(&device->dev, "_PRW evaluation error: %d\n", err);
return;
}
@@ -1025,20 +1077,73 @@
* So it is necessary to call _DSW object first. Only when it is not
* present will the _PSW object used.
*/
- psw_error = acpi_device_sleep_wake(device, 0, 0, 0);
- if (psw_error)
+ err = acpi_device_sleep_wake(device, 0, 0, 0);
+ if (err)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"error in _DSW or _PSW evaluation\n"));
}
-static void acpi_bus_add_power_resource(acpi_handle handle);
-
-static int acpi_bus_get_power_flags(struct acpi_device *device)
+static void acpi_bus_init_power_state(struct acpi_device *device, int state)
{
- acpi_status status = 0;
- acpi_handle handle = NULL;
- u32 i = 0;
+ struct acpi_device_power_state *ps = &device->power.states[state];
+ char pathname[5] = { '_', 'P', 'R', '0' + state, '\0' };
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_handle handle;
+ acpi_status status;
+ INIT_LIST_HEAD(&ps->resources);
+
+ /* Evaluate "_PRx" to get referenced power resources */
+ status = acpi_evaluate_object(device->handle, pathname, NULL, &buffer);
+ if (ACPI_SUCCESS(status)) {
+ union acpi_object *package = buffer.pointer;
+
+ if (buffer.length && package
+ && package->type == ACPI_TYPE_PACKAGE
+ && package->package.count) {
+ int err = acpi_extract_power_resources(package, 0,
+ &ps->resources);
+ if (!err)
+ device->power.flags.power_resources = 1;
+ }
+ ACPI_FREE(buffer.pointer);
+ }
+
+ /* Evaluate "_PSx" to see if we can do explicit sets */
+ pathname[2] = 'S';
+ status = acpi_get_handle(device->handle, pathname, &handle);
+ if (ACPI_SUCCESS(status))
+ ps->flags.explicit_set = 1;
+
+ /*
+ * State is valid if there are means to put the device into it.
+ * D3hot is only valid if _PR3 present.
+ */
+ if (!list_empty(&ps->resources)
+ || (ps->flags.explicit_set && state < ACPI_STATE_D3_HOT)) {
+ ps->flags.valid = 1;
+ ps->flags.os_accessible = 1;
+ }
+
+ ps->power = -1; /* Unknown - driver assigned */
+ ps->latency = -1; /* Unknown - driver assigned */
+}
+
+static void acpi_bus_get_power_flags(struct acpi_device *device)
+{
+ acpi_status status;
+ acpi_handle handle;
+ u32 i;
+
+ /* Presence of _PS0|_PR0 indicates 'power manageable' */
+ status = acpi_get_handle(device->handle, "_PS0", &handle);
+ if (ACPI_FAILURE(status)) {
+ status = acpi_get_handle(device->handle, "_PR0", &handle);
+ if (ACPI_FAILURE(status))
+ return;
+ }
+
+ device->flags.power_manageable = 1;
/*
* Power Management Flags
@@ -1053,40 +1158,10 @@
/*
* Enumerate supported power management states
*/
- for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
- struct acpi_device_power_state *ps = &device->power.states[i];
- char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
+ for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++)
+ acpi_bus_init_power_state(device, i);
- /* Evaluate "_PRx" to se if power resources are referenced */
- acpi_evaluate_reference(device->handle, object_name, NULL,
- &ps->resources);
- if (ps->resources.count) {
- int j;
-
- device->power.flags.power_resources = 1;
- for (j = 0; j < ps->resources.count; j++)
- acpi_bus_add_power_resource(ps->resources.handles[j]);
- }
-
- /* Evaluate "_PSx" to see if we can do explicit sets */
- object_name[2] = 'S';
- status = acpi_get_handle(device->handle, object_name, &handle);
- if (ACPI_SUCCESS(status))
- ps->flags.explicit_set = 1;
-
- /*
- * State is valid if there are means to put the device into it.
- * D3hot is only valid if _PR3 present.
- */
- if (ps->resources.count ||
- (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
- ps->flags.valid = 1;
- ps->flags.os_accessible = 1;
- }
-
- ps->power = -1; /* Unknown - driver assigned */
- ps->latency = -1; /* Unknown - driver assigned */
- }
+ INIT_LIST_HEAD(&device->power.states[ACPI_STATE_D3_COLD].resources);
/* Set defaults for D0 and D3 states (always valid) */
device->power.states[ACPI_STATE_D0].flags.valid = 1;
@@ -1103,17 +1178,17 @@
device->power.flags.power_resources)
device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
- acpi_bus_init_power(device);
-
- return 0;
+ if (acpi_bus_init_power(device)) {
+ acpi_free_power_resources_lists(device);
+ device->flags.power_manageable = 0;
+ }
}
-static int acpi_bus_get_flags(struct acpi_device *device)
+static void acpi_bus_get_flags(struct acpi_device *device)
{
acpi_status status = AE_OK;
acpi_handle temp = NULL;
-
/* Presence of _STA indicates 'dynamic_status' */
status = acpi_get_handle(device->handle, "_STA", &temp);
if (ACPI_SUCCESS(status))
@@ -1133,21 +1208,6 @@
if (ACPI_SUCCESS(status))
device->flags.ejectable = 1;
}
-
- /* Power resources cannot be power manageable. */
- if (device->device_type == ACPI_BUS_TYPE_POWER)
- return 0;
-
- /* Presence of _PS0|_PR0 indicates 'power manageable' */
- status = acpi_get_handle(device->handle, "_PS0", &temp);
- if (ACPI_FAILURE(status))
- status = acpi_get_handle(device->handle, "_PR0", &temp);
- if (ACPI_SUCCESS(status))
- device->flags.power_manageable = 1;
-
- /* TBD: Performance management */
-
- return 0;
}
static void acpi_device_get_busid(struct acpi_device *device)
@@ -1372,56 +1432,32 @@
}
}
-static int acpi_device_set_context(struct acpi_device *device)
+void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
+ int type, unsigned long long sta)
{
- acpi_status status;
-
- /*
- * Context
- * -------
- * Attach this 'struct acpi_device' to the ACPI object. This makes
- * resolutions from handle->device very efficient. Fixed hardware
- * devices have no handles, so we skip them.
- */
- if (!device->handle)
- return 0;
-
- status = acpi_attach_data(device->handle,
- acpi_bus_data_handler, device);
- if (ACPI_SUCCESS(status))
- return 0;
-
- printk(KERN_ERR PREFIX "Error attaching device data\n");
- return -ENODEV;
+ INIT_LIST_HEAD(&device->pnp.ids);
+ device->device_type = type;
+ device->handle = handle;
+ device->parent = acpi_bus_get_parent(handle);
+ STRUCT_TO_INT(device->status) = sta;
+ acpi_device_get_busid(device);
+ acpi_device_set_id(device);
+ acpi_bus_get_flags(device);
+ device->flags.match_driver = false;
+ device_initialize(&device->dev);
+ dev_set_uevent_suppress(&device->dev, true);
}
-static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
+void acpi_device_add_finalize(struct acpi_device *device)
{
- if (!dev)
- return -EINVAL;
-
- dev->removal_type = ACPI_BUS_REMOVAL_EJECT;
- device_release_driver(&dev->dev);
-
- if (!rmdevice)
- return 0;
-
- /*
- * unbind _ADR-Based Devices when hot removal
- */
- if (dev->flags.bus_address) {
- if ((dev->parent) && (dev->parent->ops.unbind))
- dev->parent->ops.unbind(dev);
- }
- acpi_device_unregister(dev, ACPI_BUS_REMOVAL_EJECT);
-
- return 0;
+ device->flags.match_driver = true;
+ dev_set_uevent_suppress(&device->dev, false);
+ kobject_uevent(&device->dev.kobj, KOBJ_ADD);
}
static int acpi_add_single_object(struct acpi_device **child,
acpi_handle handle, int type,
- unsigned long long sta,
- struct acpi_bus_ops *ops)
+ unsigned long long sta)
{
int result;
struct acpi_device *device;
@@ -1433,102 +1469,25 @@
return -ENOMEM;
}
- INIT_LIST_HEAD(&device->pnp.ids);
- device->device_type = type;
- device->handle = handle;
- device->parent = acpi_bus_get_parent(handle);
- device->bus_ops = *ops; /* workround for not call .start */
- STRUCT_TO_INT(device->status) = sta;
-
- acpi_device_get_busid(device);
-
- /*
- * Flags
- * -----
- * Note that we only look for object handles -- cannot evaluate objects
- * until we know the device is present and properly initialized.
- */
- result = acpi_bus_get_flags(device);
- if (result)
- goto end;
-
- /*
- * Initialize Device
- * -----------------
- * TBD: Synch with Core's enumeration/initialization process.
- */
- acpi_device_set_id(device);
-
- /*
- * Power Management
- * ----------------
- */
- if (device->flags.power_manageable) {
- result = acpi_bus_get_power_flags(device);
- if (result)
- goto end;
- }
-
- /*
- * Wakeup device management
- *-----------------------
- */
+ acpi_init_device_object(device, handle, type, sta);
+ acpi_bus_get_power_flags(device);
acpi_bus_get_wakeup_device_flags(device);
- /*
- * Performance Management
- * ----------------------
- */
- if (device->flags.performance_manageable) {
- result = acpi_bus_get_perf_flags(device);
- if (result)
- goto end;
- }
-
- if ((result = acpi_device_set_context(device)))
- goto end;
-
- result = acpi_device_register(device);
-
- /*
- * Bind _ADR-Based Devices when hot add
- */
- if (device->flags.bus_address) {
- if (device->parent && device->parent->ops.bind)
- device->parent->ops.bind(device);
- }
-
-end:
- if (!result) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Adding %s [%s] parent %s\n", dev_name(&device->dev),
- (char *) buffer.pointer,
- device->parent ? dev_name(&device->parent->dev) :
- "(null)"));
- kfree(buffer.pointer);
- *child = device;
- } else
+ result = acpi_device_add(device, acpi_device_release);
+ if (result) {
acpi_device_release(&device->dev);
+ return result;
+ }
- return result;
-}
-
-#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING)
-
-static void acpi_bus_add_power_resource(acpi_handle handle)
-{
- struct acpi_bus_ops ops = {
- .acpi_op_add = 1,
- .acpi_op_start = 1,
- };
- struct acpi_device *device = NULL;
-
- acpi_bus_get_device(handle, &device);
- if (!device)
- acpi_add_single_object(&device, handle, ACPI_BUS_TYPE_POWER,
- ACPI_STA_DEFAULT, &ops);
+ acpi_power_add_remove_device(device, true);
+ acpi_device_add_finalize(device);
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Added %s [%s] parent %s\n",
+ dev_name(&device->dev), (char *) buffer.pointer,
+ device->parent ? dev_name(&device->parent->dev) : "(null)"));
+ kfree(buffer.pointer);
+ *child = device;
+ return 0;
}
static int acpi_bus_type_and_status(acpi_handle handle, int *type,
@@ -1570,218 +1529,248 @@
return 0;
}
-static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
- void *context, void **return_value)
+static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
+ void *not_used, void **return_value)
{
- struct acpi_bus_ops *ops = context;
+ struct acpi_device *device = NULL;
int type;
unsigned long long sta;
- struct acpi_device *device;
acpi_status status;
int result;
+ acpi_bus_get_device(handle, &device);
+ if (device)
+ goto out;
+
result = acpi_bus_type_and_status(handle, &type, &sta);
if (result)
return AE_OK;
+ if (type == ACPI_BUS_TYPE_POWER) {
+ acpi_add_power_resource(handle);
+ return AE_OK;
+ }
+
if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
!(sta & ACPI_STA_DEVICE_FUNCTIONING)) {
struct acpi_device_wakeup wakeup;
acpi_handle temp;
status = acpi_get_handle(handle, "_PRW", &temp);
- if (ACPI_SUCCESS(status))
+ if (ACPI_SUCCESS(status)) {
acpi_bus_extract_wakeup_device_power_package(handle,
&wakeup);
+ acpi_power_resources_list_free(&wakeup.resources);
+ }
return AE_CTRL_DEPTH;
}
- /*
- * We may already have an acpi_device from a previous enumeration. If
- * so, we needn't add it again, but we may still have to start it.
- */
- device = NULL;
- acpi_bus_get_device(handle, &device);
- if (ops->acpi_op_add && !device) {
- acpi_add_single_object(&device, handle, type, sta, ops);
- /* Is the device a known good platform device? */
- if (device
- && !acpi_match_device_ids(device, acpi_platform_device_ids))
- acpi_create_platform_device(device);
- }
-
+ acpi_add_single_object(&device, handle, type, sta);
if (!device)
return AE_CTRL_DEPTH;
- if (ops->acpi_op_start && !(ops->acpi_op_add)) {
- status = acpi_start_single_object(device);
- if (ACPI_FAILURE(status))
- return AE_CTRL_DEPTH;
- }
-
+ out:
if (!*return_value)
*return_value = device;
+
return AE_OK;
}
-static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
- struct acpi_device **child)
+static int acpi_scan_do_attach_handler(struct acpi_device *device, char *id)
{
- acpi_status status;
- void *device = NULL;
+ struct acpi_scan_handler *handler;
- status = acpi_bus_check_add(handle, 0, ops, &device);
- if (ACPI_SUCCESS(status))
- acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
- acpi_bus_check_add, NULL, ops, &device);
+ list_for_each_entry(handler, &acpi_scan_handlers_list, list_node) {
+ const struct acpi_device_id *devid;
- if (child)
- *child = device;
+ for (devid = handler->ids; devid->id[0]; devid++) {
+ int ret;
- if (device)
- return 0;
- else
- return -ENODEV;
+ if (strcmp((char *)devid->id, id))
+ continue;
+
+ ret = handler->attach(device, devid);
+ if (ret > 0) {
+ device->handler = handler;
+ return ret;
+ } else if (ret < 0) {
+ return ret;
+ }
+ }
+ }
+ return 0;
}
-/*
- * acpi_bus_add and acpi_bus_start
+static int acpi_scan_attach_handler(struct acpi_device *device)
+{
+ struct acpi_hardware_id *hwid;
+ int ret = 0;
+
+ list_for_each_entry(hwid, &device->pnp.ids, list) {
+ ret = acpi_scan_do_attach_handler(device, hwid->id);
+ if (ret)
+ break;
+
+ }
+ return ret;
+}
+
+static acpi_status acpi_bus_device_attach(acpi_handle handle, u32 lvl_not_used,
+ void *not_used, void **ret_not_used)
+{
+ struct acpi_device *device;
+ unsigned long long sta_not_used;
+ int ret;
+
+ /*
+ * Ignore errors ignored by acpi_bus_check_add() to avoid terminating
+ * namespace walks prematurely.
+ */
+ if (acpi_bus_type_and_status(handle, &ret, &sta_not_used))
+ return AE_OK;
+
+ if (acpi_bus_get_device(handle, &device))
+ return AE_CTRL_DEPTH;
+
+ ret = acpi_scan_attach_handler(device);
+ if (ret)
+ return ret > 0 ? AE_OK : AE_CTRL_DEPTH;
+
+ ret = device_attach(&device->dev);
+ return ret >= 0 ? AE_OK : AE_CTRL_DEPTH;
+}
+
+/**
+ * acpi_bus_scan - Add ACPI device node objects in a given namespace scope.
+ * @handle: Root of the namespace scope to scan.
*
- * scan a given ACPI tree and (probably recently hot-plugged)
- * create and add or starts found devices.
+ * Scan a given ACPI tree (probably recently hot-plugged) and create and add
+ * found devices.
*
- * If no devices were found -ENODEV is returned which does not
- * mean that this is a real error, there just have been no suitable
- * ACPI objects in the table trunk from which the kernel could create
- * a device and add/start an appropriate driver.
+ * If no devices were found, -ENODEV is returned, but it does not mean that
+ * there has been a real error. There just have been no suitable ACPI objects
+ * in the table trunk from which the kernel could create a device and add an
+ * appropriate driver.
+ *
+ * Must be called under acpi_scan_lock.
*/
-
-int
-acpi_bus_add(struct acpi_device **child,
- struct acpi_device *parent, acpi_handle handle, int type)
+int acpi_bus_scan(acpi_handle handle)
{
- struct acpi_bus_ops ops;
+ void *device = NULL;
+ int error = 0;
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_add = 1;
-
- return acpi_bus_scan(handle, &ops, child);
-}
-EXPORT_SYMBOL(acpi_bus_add);
-
-int acpi_bus_start(struct acpi_device *device)
-{
- struct acpi_bus_ops ops;
- int result;
+ if (ACPI_SUCCESS(acpi_bus_check_add(handle, 0, NULL, &device)))
+ acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+ acpi_bus_check_add, NULL, NULL, &device);
if (!device)
- return -EINVAL;
+ error = -ENODEV;
+ else if (ACPI_SUCCESS(acpi_bus_device_attach(handle, 0, NULL, NULL)))
+ acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+ acpi_bus_device_attach, NULL, NULL, NULL);
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_start = 1;
-
- result = acpi_bus_scan(device->handle, &ops, NULL);
-
- acpi_update_all_gpes();
-
- return result;
+ return error;
}
-EXPORT_SYMBOL(acpi_bus_start);
+EXPORT_SYMBOL(acpi_bus_scan);
-int acpi_bus_trim(struct acpi_device *start, int rmdevice)
+static acpi_status acpi_bus_device_detach(acpi_handle handle, u32 lvl_not_used,
+ void *not_used, void **ret_not_used)
{
- acpi_status status;
- struct acpi_device *parent, *child;
- acpi_handle phandle, chandle;
- acpi_object_type type;
- u32 level = 1;
- int err = 0;
+ struct acpi_device *device = NULL;
- parent = start;
- phandle = start->handle;
- child = chandle = NULL;
+ if (!acpi_bus_get_device(handle, &device)) {
+ struct acpi_scan_handler *dev_handler = device->handler;
- while ((level > 0) && parent && (!err)) {
- status = acpi_get_next_object(ACPI_TYPE_ANY, phandle,
- chandle, &chandle);
+ device->removal_type = ACPI_BUS_REMOVAL_EJECT;
+ if (dev_handler) {
+ if (dev_handler->detach)
+ dev_handler->detach(device);
- /*
- * If this scope is exhausted then move our way back up.
- */
- if (ACPI_FAILURE(status)) {
- level--;
- chandle = phandle;
- acpi_get_parent(phandle, &phandle);
- child = parent;
- parent = parent->parent;
-
- if (level == 0)
- err = acpi_bus_remove(child, rmdevice);
- else
- err = acpi_bus_remove(child, 1);
-
- continue;
+ device->handler = NULL;
+ } else {
+ device_release_driver(&device->dev);
}
-
- status = acpi_get_type(chandle, &type);
- if (ACPI_FAILURE(status)) {
- continue;
- }
- /*
- * If there is a device corresponding to chandle then
- * parse it (depth-first).
- */
- if (acpi_bus_get_device(chandle, &child) == 0) {
- level++;
- phandle = chandle;
- chandle = NULL;
- parent = child;
- }
- continue;
}
- return err;
+ return AE_OK;
+}
+
+static acpi_status acpi_bus_remove(acpi_handle handle, u32 lvl_not_used,
+ void *not_used, void **ret_not_used)
+{
+ struct acpi_device *device = NULL;
+
+ if (!acpi_bus_get_device(handle, &device))
+ acpi_device_unregister(device);
+
+ return AE_OK;
+}
+
+/**
+ * acpi_bus_trim - Remove ACPI device node and all of its descendants
+ * @start: Root of the ACPI device nodes subtree to remove.
+ *
+ * Must be called under acpi_scan_lock.
+ */
+void acpi_bus_trim(struct acpi_device *start)
+{
+ /*
+ * Execute acpi_bus_device_detach() as a post-order callback to detach
+ * all ACPI drivers from the device nodes being removed.
+ */
+ acpi_walk_namespace(ACPI_TYPE_ANY, start->handle, ACPI_UINT32_MAX, NULL,
+ acpi_bus_device_detach, NULL, NULL);
+ acpi_bus_device_detach(start->handle, 0, NULL, NULL);
+ /*
+ * Execute acpi_bus_remove() as a post-order callback to remove device
+ * nodes in the given namespace scope.
+ */
+ acpi_walk_namespace(ACPI_TYPE_ANY, start->handle, ACPI_UINT32_MAX, NULL,
+ acpi_bus_remove, NULL, NULL);
+ acpi_bus_remove(start->handle, 0, NULL, NULL);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
static int acpi_bus_scan_fixed(void)
{
int result = 0;
- struct acpi_device *device = NULL;
- struct acpi_bus_ops ops;
-
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_add = 1;
- ops.acpi_op_start = 1;
/*
* Enumerate all fixed-feature devices.
*/
- if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
+ struct acpi_device *device = NULL;
+
result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_POWER_BUTTON,
- ACPI_STA_DEFAULT,
- &ops);
+ ACPI_STA_DEFAULT);
+ if (result)
+ return result;
+
+ result = device_attach(&device->dev);
+ if (result < 0)
+ return result;
+
device_init_wakeup(&device->dev, true);
}
- if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON)) {
+ struct acpi_device *device = NULL;
+
result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_SLEEP_BUTTON,
- ACPI_STA_DEFAULT,
- &ops);
+ ACPI_STA_DEFAULT);
+ if (result)
+ return result;
+
+ result = device_attach(&device->dev);
}
- return result;
+ return result < 0 ? result : 0;
}
int __init acpi_scan_init(void)
{
int result;
- struct acpi_bus_ops ops;
-
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_add = 1;
- ops.acpi_op_start = 1;
result = bus_register(&acpi_bus_type);
if (result) {
@@ -1789,20 +1778,33 @@
printk(KERN_ERR PREFIX "Could not register bus type\n");
}
- acpi_power_init();
+ acpi_pci_root_init();
+ acpi_pci_link_init();
+ acpi_platform_init();
+ acpi_csrt_init();
+ acpi_container_init();
+ mutex_lock(&acpi_scan_lock);
/*
* Enumerate devices in the ACPI namespace.
*/
- result = acpi_bus_scan(ACPI_ROOT_OBJECT, &ops, &acpi_root);
-
- if (!result)
- result = acpi_bus_scan_fixed();
-
+ result = acpi_bus_scan(ACPI_ROOT_OBJECT);
if (result)
- acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
- else
- acpi_update_all_gpes();
+ goto out;
+ result = acpi_bus_get_device(ACPI_ROOT_OBJECT, &acpi_root);
+ if (result)
+ goto out;
+
+ result = acpi_bus_scan_fixed();
+ if (result) {
+ acpi_device_unregister(acpi_root);
+ goto out;
+ }
+
+ acpi_update_all_gpes();
+
+ out:
+ mutex_unlock(&acpi_scan_lock);
return result;
}
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 2fcc67d..6d3a06a 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -177,6 +177,14 @@
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW41E_H",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VGN-FW21E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
@@ -386,6 +394,8 @@
acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_resume_power_resources();
+
/* If we were woken with the fixed power button, provide a small
* hint to userspace in the form of a wakeup event on the fixed power
* button device (if it can be found).
@@ -577,7 +587,28 @@
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
-#endif /* CONFIG_SUSPEND */
+
+static void acpi_sleep_suspend_setup(void)
+{
+ int i;
+
+ for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
+ acpi_status status;
+ u8 type_a, type_b;
+
+ status = acpi_get_sleep_type_data(i, &type_a, &type_b);
+ if (ACPI_SUCCESS(status)) {
+ sleep_states[i] = 1;
+ pr_cont(" S%d", i);
+ }
+ }
+
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
+}
+#else /* !CONFIG_SUSPEND */
+static inline void acpi_sleep_suspend_setup(void) {}
+#endif /* !CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
static unsigned long s4_hardware_signature;
@@ -698,7 +729,30 @@
.restore_cleanup = acpi_pm_thaw,
.recover = acpi_pm_finish,
};
-#endif /* CONFIG_HIBERNATION */
+
+static void acpi_sleep_hibernate_setup(void)
+{
+ acpi_status status;
+ u8 type_a, type_b;
+
+ status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
+ if (ACPI_FAILURE(status))
+ return;
+
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
+ sleep_states[ACPI_STATE_S4] = 1;
+ pr_cont(KERN_CONT " S4");
+ if (nosigcheck)
+ return;
+
+ acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
+ if (facs)
+ s4_hardware_signature = facs->hardware_signature;
+}
+#else /* !CONFIG_HIBERNATION */
+static inline void acpi_sleep_hibernate_setup(void) {}
+#endif /* !CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
@@ -734,9 +788,6 @@
{
acpi_status status;
u8 type_a, type_b;
-#ifdef CONFIG_SUSPEND
- int i = 0;
-#endif
if (acpi_disabled)
return 0;
@@ -744,45 +795,19 @@
acpi_sleep_dmi_check();
sleep_states[ACPI_STATE_S0] = 1;
- printk(KERN_INFO PREFIX "(supports S0");
+ pr_info(PREFIX "(supports S0");
-#ifdef CONFIG_SUSPEND
- for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
- status = acpi_get_sleep_type_data(i, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
- sleep_states[i] = 1;
- printk(KERN_CONT " S%d", i);
- }
- }
+ acpi_sleep_suspend_setup();
+ acpi_sleep_hibernate_setup();
- suspend_set_ops(old_suspend_ordering ?
- &acpi_suspend_ops_old : &acpi_suspend_ops);
-#endif
-
-#ifdef CONFIG_HIBERNATION
- status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(old_suspend_ordering ?
- &acpi_hibernation_ops_old : &acpi_hibernation_ops);
- sleep_states[ACPI_STATE_S4] = 1;
- printk(KERN_CONT " S4");
- if (!nosigcheck) {
- acpi_get_table(ACPI_SIG_FACS, 1,
- (struct acpi_table_header **)&facs);
- if (facs)
- s4_hardware_signature =
- facs->hardware_signature;
- }
- }
-#endif
status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
sleep_states[ACPI_STATE_S5] = 1;
- printk(KERN_CONT " S5");
+ pr_cont(" S5");
pm_power_off_prepare = acpi_power_off_prepare;
pm_power_off = acpi_power_off;
}
- printk(KERN_CONT ")\n");
+ pr_cont(")\n");
/*
* Register the tts_notifier to reboot notifier list so that the _TTS
* object can also be evaluated when the system enters S5.
diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h
index 74d59c8..0143540 100644
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -6,3 +6,5 @@
extern struct list_head acpi_wakeup_device_list;
extern struct mutex acpi_device_lock;
+
+extern void acpi_resume_power_resources(void);
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index ea61ca9..41c0504 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -498,7 +498,7 @@
result = acpi_get_gpe_device(index, handle);
if (result) {
ACPI_EXCEPTION((AE_INFO, AE_NOT_FOUND,
- "Invalid GPE 0x%x\n", index));
+ "Invalid GPE 0x%x", index));
goto end;
}
result = acpi_get_gpe_status(*handle, index, status);
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 2572d97..d67a1fe 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -204,7 +204,7 @@
acpi_table_parse_entries(char *id,
unsigned long table_size,
int entry_id,
- acpi_table_entry_handler handler,
+ acpi_tbl_entry_handler handler,
unsigned int max_entries)
{
struct acpi_table_header *table_header = NULL;
@@ -269,7 +269,7 @@
int __init
acpi_table_parse_madt(enum acpi_madt_type id,
- acpi_table_entry_handler handler, unsigned int max_entries)
+ acpi_tbl_entry_handler handler, unsigned int max_entries)
{
return acpi_table_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt), id,
@@ -285,7 +285,7 @@
* Scan the ACPI System Descriptor Table (STD) for a table matching @id,
* run @handler on it. Return 0 if table found, return on if not.
*/
-int __init acpi_table_parse(char *id, acpi_table_handler handler)
+int __init acpi_table_parse(char *id, acpi_tbl_table_handler handler)
{
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 506fbd4..8470771 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -97,7 +97,7 @@
MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
static int acpi_thermal_add(struct acpi_device *device);
-static int acpi_thermal_remove(struct acpi_device *device, int type);
+static int acpi_thermal_remove(struct acpi_device *device);
static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id thermal_device_ids[] = {
@@ -288,7 +288,7 @@
if (flags != ACPI_TRIPS_INIT) \
ACPI_EXCEPTION((AE_INFO, AE_ERROR, \
"ACPI thermal trip point %s changed\n" \
- "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
+ "Please send acpidump to linux-acpi@vger.kernel.org", str)); \
} while (0)
static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
@@ -531,6 +531,10 @@
{
struct acpi_thermal *tz = data;
+ if (!tz->tz_enabled) {
+ pr_warn("thermal zone is disabled \n");
+ return;
+ }
thermal_zone_device_update(tz->thermal_zone);
}
@@ -1111,7 +1115,7 @@
return result;
}
-static int acpi_thermal_remove(struct acpi_device *device, int type)
+static int acpi_thermal_remove(struct acpi_device *device)
{
struct acpi_thermal *tz = NULL;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ac9a69c..313f959 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -88,7 +88,7 @@
static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
-static int acpi_video_bus_remove(struct acpi_device *device, int type);
+static int acpi_video_bus_remove(struct acpi_device *device);
static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id video_device_ids[] = {
@@ -673,7 +673,7 @@
br->levels[i] = br->levels[i - level_ac_battery];
count += level_ac_battery;
} else if (level_ac_battery > 2)
- ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package\n"));
+ ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));
/* Check if the _BCL package is in a reversed order */
if (max_level == br->levels[2]) {
@@ -682,7 +682,7 @@
acpi_video_cmp_level, NULL);
} else if (max_level != br->levels[count - 1])
ACPI_ERROR((AE_INFO,
- "Found unordered _BCL package\n"));
+ "Found unordered _BCL package"));
br->count = count;
device->brightness = br;
@@ -1740,7 +1740,7 @@
return error;
}
-static int acpi_video_bus_remove(struct acpi_device *device, int type)
+static int acpi_video_bus_remove(struct acpi_device *device)
{
struct acpi_video_bus *video = NULL;
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4979127..495aeed 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1061,6 +1061,86 @@
{}
#endif
+int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+{
+ int rc;
+ unsigned int maxvec;
+
+ if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) {
+ rc = pci_enable_msi_block_auto(pdev, &maxvec);
+ if (rc > 0) {
+ if ((rc == maxvec) || (rc == 1))
+ return rc;
+ /*
+ * Assume that advantage of multipe MSIs is negated,
+ * so fallback to single MSI mode to save resources
+ */
+ pci_disable_msi(pdev);
+ if (!pci_enable_msi(pdev))
+ return 1;
+ }
+ }
+
+ pci_intx(pdev, 1);
+ return 0;
+}
+
+/**
+ * ahci_host_activate - start AHCI host, request IRQs and register it
+ * @host: target ATA host
+ * @irq: base IRQ number to request
+ * @n_msis: number of MSIs allocated for this host
+ * @irq_handler: irq_handler used when requesting IRQs
+ * @irq_flags: irq_flags used when requesting IRQs
+ *
+ * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1
+ * when multiple MSIs were allocated. That is one MSI per port, starting
+ * from @irq.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis)
+{
+ int i, rc;
+
+ /* Sharing Last Message among several ports is not supported */
+ if (n_msis < host->n_ports)
+ return -EINVAL;
+
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < host->n_ports; i++) {
+ rc = devm_request_threaded_irq(host->dev,
+ irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED,
+ dev_driver_string(host->dev), host->ports[i]);
+ if (rc)
+ goto out_free_irqs;
+ }
+
+ for (i = 0; i < host->n_ports; i++)
+ ata_port_desc(host->ports[i], "irq %d", irq + i);
+
+ rc = ata_host_register(host, &ahci_sht);
+ if (rc)
+ goto out_free_all_irqs;
+
+ return 0;
+
+out_free_all_irqs:
+ i = host->n_ports;
+out_free_irqs:
+ for (i--; i >= 0; i--)
+ devm_free_irq(host->dev, irq + i, host->ports[i]);
+
+ return rc;
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
unsigned int board_id = ent->driver_data;
@@ -1069,7 +1149,7 @@
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct ata_host *host;
- int n_ports, i, rc;
+ int n_ports, n_msis, i, rc;
int ahci_pci_bar = AHCI_PCI_BAR_STANDARD;
VPRINTK("ENTER\n");
@@ -1156,11 +1236,12 @@
if (ahci_sb600_enable_64bit(pdev))
hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
- if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
- pci_intx(pdev, 1);
-
hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];
+ n_msis = ahci_init_interrupts(pdev, hpriv);
+ if (n_msis > 1)
+ hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+
/* save initial config */
ahci_pci_save_initial_config(pdev, hpriv);
@@ -1256,6 +1337,10 @@
ahci_pci_print_info(host);
pci_set_master(pdev);
+
+ if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
+ return ahci_host_activate(host, pdev->irq, n_msis);
+
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
}
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 9be4712..b830e6c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -231,6 +231,7 @@
AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on
port start (wait until
error-handling stage) */
+ AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */
/* ap->flags bits */
@@ -297,6 +298,8 @@
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
unsigned int ncq_saw_sdb:1;
+ u32 intr_status; /* interrupts to handle */
+ spinlock_t lock; /* protects parent ata_port */
u32 intr_mask; /* interrupts to enable */
bool fbs_supported; /* set iff FBS is supported */
bool fbs_enabled; /* set iff FBS is enabled */
@@ -359,7 +362,10 @@
struct ata_port_info *pi);
int ahci_reset_em(struct ata_host *host);
irqreturn_t ahci_interrupt(int irq, void *dev_instance);
+irqreturn_t ahci_hw_interrupt(int irq, void *dev_instance);
+irqreturn_t ahci_thread_fn(int irq, void *dev_instance);
void ahci_print_info(struct ata_host *host, const char *scc_s);
+int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis);
static inline void __iomem *__ahci_port_base(struct ata_host *host,
unsigned int port_no)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 6cd7805..34c8216 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1655,19 +1655,16 @@
ata_port_abort(ap);
}
-static void ahci_port_intr(struct ata_port *ap)
+static void ahci_handle_port_interrupt(struct ata_port *ap,
+ void __iomem *port_mmio, u32 status)
{
- void __iomem *port_mmio = ahci_port_base(ap);
struct ata_eh_info *ehi = &ap->link.eh_info;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
- u32 status, qc_active = 0;
+ u32 qc_active = 0;
int rc;
- status = readl(port_mmio + PORT_IRQ_STAT);
- writel(status, port_mmio + PORT_IRQ_STAT);
-
/* ignore BAD_PMP while resetting */
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
@@ -1743,6 +1740,107 @@
}
}
+void ahci_port_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 status;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ ahci_handle_port_interrupt(ap, port_mmio, status);
+}
+
+irqreturn_t ahci_thread_fn(int irq, void *dev_instance)
+{
+ struct ata_port *ap = dev_instance;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave(&ap->host->lock, flags);
+ status = pp->intr_status;
+ if (status)
+ pp->intr_status = 0;
+ spin_unlock_irqrestore(&ap->host->lock, flags);
+
+ spin_lock_bh(ap->lock);
+ ahci_handle_port_interrupt(ap, port_mmio, status);
+ spin_unlock_bh(ap->lock);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(ahci_thread_fn);
+
+void ahci_hw_port_interrupt(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 status;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ pp->intr_status |= status;
+}
+
+irqreturn_t ahci_hw_interrupt(int irq, void *dev_instance)
+{
+ struct ata_port *ap_this = dev_instance;
+ struct ahci_port_priv *pp = ap_this->private_data;
+ struct ata_host *host = ap_this->host;
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ unsigned int i;
+ u32 irq_stat, irq_masked;
+
+ VPRINTK("ENTER\n");
+
+ spin_lock(&host->lock);
+
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+
+ if (!irq_stat) {
+ u32 status = pp->intr_status;
+
+ spin_unlock(&host->lock);
+
+ VPRINTK("EXIT\n");
+
+ return status ? IRQ_WAKE_THREAD : IRQ_NONE;
+ }
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ if (!(irq_masked & (1 << i)))
+ continue;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_hw_port_interrupt(ap);
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit())
+ dev_warn(host->dev,
+ "interrupt on disabled port %u\n", i);
+ }
+ }
+
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+ spin_unlock(&host->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_WAKE_THREAD;
+}
+EXPORT_SYMBOL_GPL(ahci_hw_interrupt);
+
irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -2196,6 +2294,14 @@
*/
pp->intr_mask = DEF_PORT_IRQ;
+ /*
+ * Switch to per-port locking in case each port has its own MSI vector.
+ */
+ if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+ spin_lock_init(&pp->lock);
+ ap->lock = &pp->lock;
+ }
+
ap->private_data = pp;
/* engage engines, captain */
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index ef01ac0..6fc67f7 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1029,30 +1029,20 @@
{
struct scsi_device *sdev = dev->sdev;
acpi_handle handle;
- struct device *device;
handle = ata_dev_acpi_handle(dev);
- if (!handle)
- return;
-
- device = &sdev->sdev_gendev;
-
- acpi_power_resource_register_device(device, handle);
+ if (handle)
+ acpi_dev_pm_remove_dependent(handle, &sdev->sdev_gendev);
}
static void ata_acpi_unregister_power_resource(struct ata_device *dev)
{
struct scsi_device *sdev = dev->sdev;
acpi_handle handle;
- struct device *device;
handle = ata_dev_acpi_handle(dev);
- if (!handle)
- return;
-
- device = &sdev->sdev_gendev;
-
- acpi_power_resource_unregister_device(device, handle);
+ if (handle)
+ acpi_dev_pm_remove_dependent(handle, &sdev->sdev_gendev);
}
void ata_acpi_bind(struct ata_device *dev)
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 5aa2d70..4e22ce3 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
obj-$(CONFIG_REGMAP) += regmap/
obj-$(CONFIG_SOC_BUS) += soc.o
+obj-$(CONFIG_PINCTRL) += pinctrl.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index e3bbed8..65631015 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -24,6 +24,7 @@
#include <linux/wait.h>
#include <linux/async.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/devinfo.h>
#include "base.h"
#include "power/power.h"
@@ -269,6 +270,12 @@
WARN_ON(!list_empty(&dev->devres_head));
dev->driver = drv;
+
+ /* If using pinctrl, bind pins now before probing */
+ ret = pinctrl_bind_pins(dev);
+ if (ret)
+ goto probe_failed;
+
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
__func__, dev_name(dev));
diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c
new file mode 100644
index 0000000..67a274e
--- /dev/null
+++ b/drivers/base/pinctrl.c
@@ -0,0 +1,69 @@
+/*
+ * Driver core interface to the pinctrl subsystem.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/device.h>
+#include <linux/pinctrl/devinfo.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/slab.h>
+
+/**
+ * pinctrl_bind_pins() - called by the device core before probe
+ * @dev: the device that is just about to probe
+ */
+int pinctrl_bind_pins(struct device *dev)
+{
+ int ret;
+
+ dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL);
+ if (!dev->pins)
+ return -ENOMEM;
+
+ dev->pins->p = devm_pinctrl_get(dev);
+ if (IS_ERR(dev->pins->p)) {
+ dev_dbg(dev, "no pinctrl handle\n");
+ ret = PTR_ERR(dev->pins->p);
+ goto cleanup_alloc;
+ }
+
+ dev->pins->default_state = pinctrl_lookup_state(dev->pins->p,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(dev->pins->default_state)) {
+ dev_dbg(dev, "no default pinctrl state\n");
+ ret = 0;
+ goto cleanup_get;
+ }
+
+ ret = pinctrl_select_state(dev->pins->p, dev->pins->default_state);
+ if (ret) {
+ dev_dbg(dev, "failed to activate default pinctrl state\n");
+ goto cleanup_get;
+ }
+
+ return 0;
+
+ /*
+ * If no pinctrl handle or default state was found for this device,
+ * let's explicitly free the pin container in the device, there is
+ * no point in keeping it around.
+ */
+cleanup_get:
+ devm_pinctrl_put(dev->pins->p);
+cleanup_alloc:
+ devm_kfree(dev, dev->pins);
+ dev->pins = NULL;
+
+ /* Only return deferrals */
+ if (ret != -EPROBE_DEFER)
+ ret = 0;
+
+ return ret;
+}
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index acc3a8d..9a6b05a 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -433,8 +433,7 @@
*/
void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
{
- if (!work_pending(&genpd->power_off_work))
- queue_work(pm_wq, &genpd->power_off_work);
+ queue_work(pm_wq, &genpd->power_off_work);
}
/**
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 50b2831..32ee0fc 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -162,7 +162,7 @@
return v;
}
-EXPORT_SYMBOL(opp_get_voltage);
+EXPORT_SYMBOL_GPL(opp_get_voltage);
/**
* opp_get_freq() - Gets the frequency corresponding to an available opp
@@ -192,7 +192,7 @@
return f;
}
-EXPORT_SYMBOL(opp_get_freq);
+EXPORT_SYMBOL_GPL(opp_get_freq);
/**
* opp_get_opp_count() - Get number of opps available in the opp list
@@ -225,7 +225,7 @@
return count;
}
-EXPORT_SYMBOL(opp_get_opp_count);
+EXPORT_SYMBOL_GPL(opp_get_opp_count);
/**
* opp_find_freq_exact() - search for an exact frequency
@@ -276,7 +276,7 @@
return opp;
}
-EXPORT_SYMBOL(opp_find_freq_exact);
+EXPORT_SYMBOL_GPL(opp_find_freq_exact);
/**
* opp_find_freq_ceil() - Search for an rounded ceil freq
@@ -323,7 +323,7 @@
return opp;
}
-EXPORT_SYMBOL(opp_find_freq_ceil);
+EXPORT_SYMBOL_GPL(opp_find_freq_ceil);
/**
* opp_find_freq_floor() - Search for a rounded floor freq
@@ -374,7 +374,7 @@
return opp;
}
-EXPORT_SYMBOL(opp_find_freq_floor);
+EXPORT_SYMBOL_GPL(opp_find_freq_floor);
/**
* opp_add() - Add an OPP table from a table definitions
@@ -568,7 +568,7 @@
{
return opp_set_availability(dev, freq, true);
}
-EXPORT_SYMBOL(opp_enable);
+EXPORT_SYMBOL_GPL(opp_enable);
/**
* opp_disable() - Disable a specific OPP
@@ -590,7 +590,7 @@
{
return opp_set_availability(dev, freq, false);
}
-EXPORT_SYMBOL(opp_disable);
+EXPORT_SYMBOL_GPL(opp_disable);
#ifdef CONFIG_CPU_FREQ
/**
@@ -661,6 +661,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(opp_init_cpufreq_table);
/**
* opp_free_cpufreq_table() - free the cpufreq table
@@ -678,6 +679,7 @@
kfree(*table);
*table = NULL;
}
+EXPORT_SYMBOL_GPL(opp_free_cpufreq_table);
#endif /* CONFIG_CPU_FREQ */
/**
@@ -738,4 +740,5 @@
return 0;
}
+EXPORT_SYMBOL_GPL(of_init_opp_table);
#endif
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index e6ee5e8..79715e7 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -382,6 +382,12 @@
{
unsigned int cec;
+ /*
+ * active wakeup source should bring the system
+ * out of PM_SUSPEND_FREEZE state
+ */
+ freeze_wake();
+
ws->active = true;
ws->active_count++;
ws->last_time = ktime_get();
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 5e75d1b..cf12998 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_REGMAP) += regmap.o regcache.o
-obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o
+obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index 401d191..5a22bd3 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -16,6 +16,7 @@
#include <linux/regmap.h>
#include <linux/fs.h>
#include <linux/list.h>
+#include <linux/wait.h>
struct regmap;
struct regcache_ops;
@@ -25,6 +26,7 @@
off_t min;
off_t max;
unsigned int base_reg;
+ unsigned int max_reg;
};
struct regmap_format {
@@ -39,6 +41,13 @@
unsigned int (*parse_val)(void *buf);
};
+struct regmap_async {
+ struct list_head list;
+ struct work_struct cleanup;
+ struct regmap *map;
+ void *work_buf;
+};
+
struct regmap {
struct mutex mutex;
spinlock_t spinlock;
@@ -53,6 +62,11 @@
void *bus_context;
const char *name;
+ spinlock_t async_lock;
+ wait_queue_head_t async_waitq;
+ struct list_head async_list;
+ int async_ret;
+
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
const char *debugfs_name;
@@ -74,6 +88,11 @@
const struct regmap_access_table *volatile_table;
const struct regmap_access_table *precious_table;
+ int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
+ int (*reg_write)(void *context, unsigned int reg, unsigned int val);
+
+ bool defer_caching;
+
u8 read_flag_mask;
u8 write_flag_mask;
@@ -175,7 +194,10 @@
unsigned int val, unsigned int word_size);
int regcache_lookup_reg(struct regmap *map, unsigned int reg);
+void regmap_async_complete_cb(struct regmap_async *async, int ret);
+
extern struct regcache_ops regcache_rbtree_ops;
extern struct regcache_ops regcache_lzo_ops;
+extern struct regcache_ops regcache_flat_ops;
#endif
diff --git a/drivers/base/regmap/regcache-flat.c b/drivers/base/regmap/regcache-flat.c
new file mode 100644
index 0000000..d9762e4
--- /dev/null
+++ b/drivers/base/regmap/regcache-flat.c
@@ -0,0 +1,72 @@
+/*
+ * Register cache access API - flat caching support
+ *
+ * Copyright 2012 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+
+#include "internal.h"
+
+static int regcache_flat_init(struct regmap *map)
+{
+ int i;
+ unsigned int *cache;
+
+ map->cache = kzalloc(sizeof(unsigned int) * (map->max_register + 1),
+ GFP_KERNEL);
+ if (!map->cache)
+ return -ENOMEM;
+
+ cache = map->cache;
+
+ for (i = 0; i < map->num_reg_defaults; i++)
+ cache[map->reg_defaults[i].reg] = map->reg_defaults[i].def;
+
+ return 0;
+}
+
+static int regcache_flat_exit(struct regmap *map)
+{
+ kfree(map->cache);
+ map->cache = NULL;
+
+ return 0;
+}
+
+static int regcache_flat_read(struct regmap *map,
+ unsigned int reg, unsigned int *value)
+{
+ unsigned int *cache = map->cache;
+
+ *value = cache[reg];
+
+ return 0;
+}
+
+static int regcache_flat_write(struct regmap *map, unsigned int reg,
+ unsigned int value)
+{
+ unsigned int *cache = map->cache;
+
+ cache[reg] = value;
+
+ return 0;
+}
+
+struct regcache_ops regcache_flat_ops = {
+ .type = REGCACHE_FLAT,
+ .name = "flat",
+ .init = regcache_flat_init,
+ .exit = regcache_flat_exit,
+ .read = regcache_flat_read,
+ .write = regcache_flat_write,
+};
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index 835883b..e69ff3e 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -22,6 +22,7 @@
static const struct regcache_ops *cache_types[] = {
®cache_rbtree_ops,
®cache_lzo_ops,
+ ®cache_flat_ops,
};
static int regcache_hw_init(struct regmap *map)
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index d9a6c94..78d5f20 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -81,6 +81,8 @@
struct regmap_debugfs_off_cache *c = NULL;
loff_t p = 0;
unsigned int i, ret;
+ unsigned int fpos_offset;
+ unsigned int reg_offset;
/*
* If we don't have a cache build one so we don't have to do a
@@ -93,6 +95,9 @@
regmap_precious(map, i)) {
if (c) {
c->max = p - 1;
+ fpos_offset = c->max - c->min;
+ reg_offset = fpos_offset / map->debugfs_tot_len;
+ c->max_reg = c->base_reg + reg_offset;
list_add_tail(&c->list,
&map->debugfs_off_cache);
c = NULL;
@@ -119,6 +124,9 @@
/* Close the last entry off if we didn't scan beyond it */
if (c) {
c->max = p - 1;
+ fpos_offset = c->max - c->min;
+ reg_offset = fpos_offset / map->debugfs_tot_len;
+ c->max_reg = c->base_reg + reg_offset;
list_add_tail(&c->list,
&map->debugfs_off_cache);
}
@@ -128,25 +136,38 @@
* allocate and we should never be in this code if there are
* no registers at all.
*/
- if (list_empty(&map->debugfs_off_cache)) {
- WARN_ON(list_empty(&map->debugfs_off_cache));
- return base;
- }
+ WARN_ON(list_empty(&map->debugfs_off_cache));
+ ret = base;
- /* Find the relevant block */
+ /* Find the relevant block:offset */
list_for_each_entry(c, &map->debugfs_off_cache, list) {
if (from >= c->min && from <= c->max) {
- *pos = c->min;
- return c->base_reg;
+ fpos_offset = from - c->min;
+ reg_offset = fpos_offset / map->debugfs_tot_len;
+ *pos = c->min + (reg_offset * map->debugfs_tot_len);
+ return c->base_reg + reg_offset;
}
- *pos = c->min;
- ret = c->base_reg;
+ *pos = c->max;
+ ret = c->max_reg;
}
return ret;
}
+static inline void regmap_calc_tot_len(struct regmap *map,
+ void *buf, size_t count)
+{
+ /* Calculate the length of a fixed format */
+ if (!map->debugfs_tot_len) {
+ map->debugfs_reg_len = regmap_calc_reg_len(map->max_register,
+ buf, count);
+ map->debugfs_val_len = 2 * map->format.val_bytes;
+ map->debugfs_tot_len = map->debugfs_reg_len +
+ map->debugfs_val_len + 3; /* : \n */
+ }
+}
+
static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from,
unsigned int to, char __user *user_buf,
size_t count, loff_t *ppos)
@@ -165,14 +186,7 @@
if (!buf)
return -ENOMEM;
- /* Calculate the length of a fixed format */
- if (!map->debugfs_tot_len) {
- map->debugfs_reg_len = regmap_calc_reg_len(map->max_register,
- buf, count);
- map->debugfs_val_len = 2 * map->format.val_bytes;
- map->debugfs_tot_len = map->debugfs_reg_len +
- map->debugfs_val_len + 3; /* : \n */
- }
+ regmap_calc_tot_len(map, buf, count);
/* Work out which register we're starting at */
start_reg = regmap_debugfs_get_dump_start(map, from, *ppos, &p);
@@ -187,7 +201,7 @@
/* If we're in the region the user is trying to read */
if (p >= *ppos) {
/* ...but not beyond it */
- if (buf_pos + 1 + map->debugfs_tot_len >= count)
+ if (buf_pos + map->debugfs_tot_len > count)
break;
/* Format the register */
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 5972ad9..4706c63 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -34,6 +34,7 @@
int irq;
int wake_count;
+ void *status_reg_buf;
unsigned int *status_buf;
unsigned int *mask_buf;
unsigned int *mask_buf_def;
@@ -87,6 +88,23 @@
if (ret != 0)
dev_err(d->map->dev, "Failed to sync masks in %x\n",
reg);
+
+ reg = d->chip->wake_base +
+ (i * map->reg_stride * d->irq_reg_stride);
+ if (d->wake_buf) {
+ if (d->chip->wake_invert)
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i],
+ ~d->wake_buf[i]);
+ else
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i],
+ d->wake_buf[i]);
+ if (ret != 0)
+ dev_err(d->map->dev,
+ "Failed to sync wakes in %x: %d\n",
+ reg, ret);
+ }
}
if (d->chip->runtime_pm)
@@ -129,16 +147,15 @@
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
- if (!d->chip->wake_base)
- return -EINVAL;
-
if (on) {
- d->wake_buf[irq_data->reg_offset / map->reg_stride]
- &= ~irq_data->mask;
+ if (d->wake_buf)
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ &= ~irq_data->mask;
d->wake_count++;
} else {
- d->wake_buf[irq_data->reg_offset / map->reg_stride]
- |= irq_data->mask;
+ if (d->wake_buf)
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ |= irq_data->mask;
d->wake_count--;
}
@@ -172,6 +189,62 @@
}
/*
+ * Read in the statuses, using a single bulk read if possible
+ * in order to reduce the I/O overheads.
+ */
+ if (!map->use_single_rw && map->reg_stride == 1 &&
+ data->irq_reg_stride == 1) {
+ u8 *buf8 = data->status_reg_buf;
+ u16 *buf16 = data->status_reg_buf;
+ u32 *buf32 = data->status_reg_buf;
+
+ BUG_ON(!data->status_reg_buf);
+
+ ret = regmap_bulk_read(map, chip->status_base,
+ data->status_reg_buf,
+ chip->num_regs);
+ if (ret != 0) {
+ dev_err(map->dev, "Failed to read IRQ status: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ for (i = 0; i < data->chip->num_regs; i++) {
+ switch (map->format.val_bytes) {
+ case 1:
+ data->status_buf[i] = buf8[i];
+ break;
+ case 2:
+ data->status_buf[i] = buf16[i];
+ break;
+ case 4:
+ data->status_buf[i] = buf32[i];
+ break;
+ default:
+ BUG();
+ return IRQ_NONE;
+ }
+ }
+
+ } else {
+ for (i = 0; i < data->chip->num_regs; i++) {
+ ret = regmap_read(map, chip->status_base +
+ (i * map->reg_stride
+ * data->irq_reg_stride),
+ &data->status_buf[i]);
+
+ if (ret != 0) {
+ dev_err(map->dev,
+ "Failed to read IRQ status: %d\n",
+ ret);
+ if (chip->runtime_pm)
+ pm_runtime_put(map->dev);
+ return IRQ_NONE;
+ }
+ }
+ }
+
+ /*
* Ignore masked IRQs and ack if we need to; we ack early so
* there is no race between handling and acknowleding the
* interrupt. We assume that typically few of the interrupts
@@ -179,18 +252,6 @@
* doing a write per register.
*/
for (i = 0; i < data->chip->num_regs; i++) {
- ret = regmap_read(map, chip->status_base + (i * map->reg_stride
- * data->irq_reg_stride),
- &data->status_buf[i]);
-
- if (ret != 0) {
- dev_err(map->dev, "Failed to read IRQ status: %d\n",
- ret);
- if (chip->runtime_pm)
- pm_runtime_put(map->dev);
- return IRQ_NONE;
- }
-
data->status_buf[i] &= ~data->mask_buf[i];
if (data->status_buf[i] && chip->ack_base) {
@@ -316,11 +377,6 @@
d->irq_chip = regmap_irq_chip;
d->irq_chip.name = chip->name;
- if (!chip->wake_base) {
- d->irq_chip.irq_set_wake = NULL;
- d->irq_chip.flags |= IRQCHIP_MASK_ON_SUSPEND |
- IRQCHIP_SKIP_SET_WAKE;
- }
d->irq = irq;
d->map = map;
d->chip = chip;
@@ -331,6 +387,14 @@
else
d->irq_reg_stride = 1;
+ if (!map->use_single_rw && map->reg_stride == 1 &&
+ d->irq_reg_stride == 1) {
+ d->status_reg_buf = kmalloc(map->format.val_bytes *
+ chip->num_regs, GFP_KERNEL);
+ if (!d->status_reg_buf)
+ goto err_alloc;
+ }
+
mutex_init(&d->lock);
for (i = 0; i < chip->num_irqs; i++)
@@ -361,8 +425,15 @@
d->wake_buf[i] = d->mask_buf_def[i];
reg = chip->wake_base +
(i * map->reg_stride * d->irq_reg_stride);
- ret = regmap_update_bits(map, reg, d->wake_buf[i],
- d->wake_buf[i]);
+
+ if (chip->wake_invert)
+ ret = regmap_update_bits(map, reg,
+ d->mask_buf_def[i],
+ 0);
+ else
+ ret = regmap_update_bits(map, reg,
+ d->mask_buf_def[i],
+ d->wake_buf[i]);
if (ret != 0) {
dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
reg, ret);
@@ -401,6 +472,7 @@
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
+ kfree(d->status_reg_buf);
kfree(d);
return ret;
}
@@ -422,6 +494,7 @@
kfree(d->wake_buf);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
+ kfree(d->status_reg_buf);
kfree(d->status_buf);
kfree(d);
}
diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c
index f05fc74..98745dd 100644
--- a/drivers/base/regmap/regmap-mmio.c
+++ b/drivers/base/regmap/regmap-mmio.c
@@ -16,6 +16,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -26,6 +27,7 @@
struct regmap_mmio_context {
void __iomem *regs;
unsigned val_bytes;
+ struct clk *clk;
};
static int regmap_mmio_gather_write(void *context,
@@ -34,9 +36,16 @@
{
struct regmap_mmio_context *ctx = context;
u32 offset;
+ int ret;
BUG_ON(reg_size != 4);
+ if (ctx->clk) {
+ ret = clk_enable(ctx->clk);
+ if (ret < 0)
+ return ret;
+ }
+
offset = *(u32 *)reg;
while (val_size) {
@@ -64,6 +73,9 @@
offset += ctx->val_bytes;
}
+ if (ctx->clk)
+ clk_disable(ctx->clk);
+
return 0;
}
@@ -80,9 +92,16 @@
{
struct regmap_mmio_context *ctx = context;
u32 offset;
+ int ret;
BUG_ON(reg_size != 4);
+ if (ctx->clk) {
+ ret = clk_enable(ctx->clk);
+ if (ret < 0)
+ return ret;
+ }
+
offset = *(u32 *)reg;
while (val_size) {
@@ -110,11 +129,20 @@
offset += ctx->val_bytes;
}
+ if (ctx->clk)
+ clk_disable(ctx->clk);
+
return 0;
}
static void regmap_mmio_free_context(void *context)
{
+ struct regmap_mmio_context *ctx = context;
+
+ if (ctx->clk) {
+ clk_unprepare(ctx->clk);
+ clk_put(ctx->clk);
+ }
kfree(context);
}
@@ -128,11 +156,14 @@
.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
};
-static struct regmap_mmio_context *regmap_mmio_gen_context(void __iomem *regs,
+static struct regmap_mmio_context *regmap_mmio_gen_context(struct device *dev,
+ const char *clk_id,
+ void __iomem *regs,
const struct regmap_config *config)
{
struct regmap_mmio_context *ctx;
int min_stride;
+ int ret;
if (config->reg_bits != 32)
return ERR_PTR(-EINVAL);
@@ -179,37 +210,59 @@
ctx->regs = regs;
ctx->val_bytes = config->val_bits / 8;
+ if (clk_id == NULL)
+ return ctx;
+
+ ctx->clk = clk_get(dev, clk_id);
+ if (IS_ERR(ctx->clk)) {
+ ret = PTR_ERR(ctx->clk);
+ goto err_free;
+ }
+
+ ret = clk_prepare(ctx->clk);
+ if (ret < 0) {
+ clk_put(ctx->clk);
+ goto err_free;
+ }
+
return ctx;
+
+err_free:
+ kfree(ctx);
+
+ return ERR_PTR(ret);
}
/**
- * regmap_init_mmio(): Initialise register map
+ * regmap_init_mmio_clk(): Initialise register map with register clock
*
* @dev: Device that will be interacted with
+ * @clk_id: register clock consumer ID
* @regs: Pointer to memory-mapped IO region
* @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer to
* a struct regmap.
*/
-struct regmap *regmap_init_mmio(struct device *dev,
- void __iomem *regs,
- const struct regmap_config *config)
+struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+ void __iomem *regs,
+ const struct regmap_config *config)
{
struct regmap_mmio_context *ctx;
- ctx = regmap_mmio_gen_context(regs, config);
+ ctx = regmap_mmio_gen_context(dev, clk_id, regs, config);
if (IS_ERR(ctx))
return ERR_CAST(ctx);
return regmap_init(dev, ®map_mmio, ctx, config);
}
-EXPORT_SYMBOL_GPL(regmap_init_mmio);
+EXPORT_SYMBOL_GPL(regmap_init_mmio_clk);
/**
- * devm_regmap_init_mmio(): Initialise managed register map
+ * devm_regmap_init_mmio_clk(): Initialise managed register map with clock
*
* @dev: Device that will be interacted with
+ * @clk_id: register clock consumer ID
* @regs: Pointer to memory-mapped IO region
* @config: Configuration for register map
*
@@ -217,18 +270,18 @@
* to a struct regmap. The regmap will be automatically freed by the
* device management code.
*/
-struct regmap *devm_regmap_init_mmio(struct device *dev,
- void __iomem *regs,
- const struct regmap_config *config)
+struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+ void __iomem *regs,
+ const struct regmap_config *config)
{
struct regmap_mmio_context *ctx;
- ctx = regmap_mmio_gen_context(regs, config);
+ ctx = regmap_mmio_gen_context(dev, clk_id, regs, config);
if (IS_ERR(ctx))
return ERR_CAST(ctx);
return devm_regmap_init(dev, ®map_mmio, ctx, config);
}
-EXPORT_SYMBOL_GPL(devm_regmap_init_mmio);
+EXPORT_SYMBOL_GPL(devm_regmap_init_mmio_clk);
MODULE_LICENSE("GPL v2");
diff --git a/drivers/base/regmap/regmap-spi.c b/drivers/base/regmap/regmap-spi.c
index ffa46a9..4c506bd 100644
--- a/drivers/base/regmap/regmap-spi.c
+++ b/drivers/base/regmap/regmap-spi.c
@@ -15,6 +15,21 @@
#include <linux/init.h>
#include <linux/module.h>
+#include "internal.h"
+
+struct regmap_async_spi {
+ struct regmap_async core;
+ struct spi_message m;
+ struct spi_transfer t[2];
+};
+
+static void regmap_spi_complete(void *data)
+{
+ struct regmap_async_spi *async = data;
+
+ regmap_async_complete_cb(&async->core, async->m.status);
+}
+
static int regmap_spi_write(void *context, const void *data, size_t count)
{
struct device *dev = context;
@@ -40,6 +55,43 @@
return spi_sync(spi, &m);
}
+static int regmap_spi_async_write(void *context,
+ const void *reg, size_t reg_len,
+ const void *val, size_t val_len,
+ struct regmap_async *a)
+{
+ struct regmap_async_spi *async = container_of(a,
+ struct regmap_async_spi,
+ core);
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ async->t[0].tx_buf = reg;
+ async->t[0].len = reg_len;
+ async->t[1].tx_buf = val;
+ async->t[1].len = val_len;
+
+ spi_message_init(&async->m);
+ spi_message_add_tail(&async->t[0], &async->m);
+ spi_message_add_tail(&async->t[1], &async->m);
+
+ async->m.complete = regmap_spi_complete;
+ async->m.context = async;
+
+ return spi_async(spi, &async->m);
+}
+
+static struct regmap_async *regmap_spi_async_alloc(void)
+{
+ struct regmap_async_spi *async_spi;
+
+ async_spi = kzalloc(sizeof(*async_spi), GFP_KERNEL);
+ if (!async_spi)
+ return NULL;
+
+ return &async_spi->core;
+}
+
static int regmap_spi_read(void *context,
const void *reg, size_t reg_size,
void *val, size_t val_size)
@@ -53,6 +105,8 @@
static struct regmap_bus regmap_spi = {
.write = regmap_spi_write,
.gather_write = regmap_spi_gather_write,
+ .async_write = regmap_spi_async_write,
+ .async_alloc = regmap_spi_async_alloc,
.read = regmap_spi_read,
.read_flag_mask = 0x80,
};
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index f00b059..3d23675 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -16,6 +16,7 @@
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/rbtree.h>
+#include <linux/sched.h>
#define CREATE_TRACE_POINTS
#include <trace/events/regmap.h>
@@ -34,6 +35,22 @@
unsigned int mask, unsigned int val,
bool *change);
+static int _regmap_bus_read(void *context, unsigned int reg,
+ unsigned int *val);
+static int _regmap_bus_formatted_write(void *context, unsigned int reg,
+ unsigned int val);
+static int _regmap_bus_raw_write(void *context, unsigned int reg,
+ unsigned int val);
+
+static void async_cleanup(struct work_struct *work)
+{
+ struct regmap_async *async = container_of(work, struct regmap_async,
+ cleanup);
+
+ kfree(async->work_buf);
+ kfree(async);
+}
+
bool regmap_reg_in_ranges(unsigned int reg,
const struct regmap_range *ranges,
unsigned int nranges)
@@ -372,7 +389,7 @@
enum regmap_endian reg_endian, val_endian;
int i, j;
- if (!bus || !config)
+ if (!config)
goto err;
map = kzalloc(sizeof(*map), GFP_KERNEL);
@@ -386,7 +403,8 @@
map->unlock = config->unlock;
map->lock_arg = config->lock_arg;
} else {
- if (bus->fast_io) {
+ if ((bus && bus->fast_io) ||
+ config->fast_io) {
spin_lock_init(&map->spinlock);
map->lock = regmap_lock_spinlock;
map->unlock = regmap_unlock_spinlock;
@@ -423,13 +441,27 @@
map->cache_type = config->cache_type;
map->name = config->name;
+ spin_lock_init(&map->async_lock);
+ INIT_LIST_HEAD(&map->async_list);
+ init_waitqueue_head(&map->async_waitq);
+
if (config->read_flag_mask || config->write_flag_mask) {
map->read_flag_mask = config->read_flag_mask;
map->write_flag_mask = config->write_flag_mask;
- } else {
+ } else if (bus) {
map->read_flag_mask = bus->read_flag_mask;
}
+ if (!bus) {
+ map->reg_read = config->reg_read;
+ map->reg_write = config->reg_write;
+
+ map->defer_caching = false;
+ goto skip_format_initialization;
+ } else {
+ map->reg_read = _regmap_bus_read;
+ }
+
reg_endian = config->reg_format_endian;
if (reg_endian == REGMAP_ENDIAN_DEFAULT)
reg_endian = bus->reg_format_endian_default;
@@ -500,6 +532,12 @@
}
break;
+ case 24:
+ if (reg_endian != REGMAP_ENDIAN_BIG)
+ goto err_map;
+ map->format.format_reg = regmap_format_24;
+ break;
+
case 32:
switch (reg_endian) {
case REGMAP_ENDIAN_BIG:
@@ -575,6 +613,16 @@
goto err_map;
}
+ if (map->format.format_write) {
+ map->defer_caching = false;
+ map->reg_write = _regmap_bus_formatted_write;
+ } else if (map->format.format_val) {
+ map->defer_caching = true;
+ map->reg_write = _regmap_bus_raw_write;
+ }
+
+skip_format_initialization:
+
map->range_tree = RB_ROOT;
for (i = 0; i < config->num_ranges; i++) {
const struct regmap_range_cfg *range_cfg = &config->ranges[i];
@@ -776,7 +824,7 @@
regcache_exit(map);
regmap_debugfs_exit(map);
regmap_range_exit(map);
- if (map->bus->free_context)
+ if (map->bus && map->bus->free_context)
map->bus->free_context(map->bus_context);
kfree(map->work_buf);
kfree(map);
@@ -870,15 +918,20 @@
}
static int _regmap_raw_write(struct regmap *map, unsigned int reg,
- const void *val, size_t val_len)
+ const void *val, size_t val_len, bool async)
{
struct regmap_range_node *range;
+ unsigned long flags;
u8 *u8 = map->work_buf;
+ void *work_val = map->work_buf + map->format.reg_bytes +
+ map->format.pad_bytes;
void *buf;
int ret = -ENOTSUPP;
size_t len;
int i;
+ BUG_ON(!map->bus);
+
/* Check for unwritable registers before we start */
if (map->writeable_reg)
for (i = 0; i < val_len / map->format.val_bytes; i++)
@@ -918,7 +971,7 @@
dev_dbg(map->dev, "Writing window %d/%zu\n",
win_residue, val_len / map->format.val_bytes);
ret = _regmap_raw_write(map, reg, val, win_residue *
- map->format.val_bytes);
+ map->format.val_bytes, async);
if (ret != 0)
return ret;
@@ -941,6 +994,50 @@
u8[0] |= map->write_flag_mask;
+ if (async && map->bus->async_write) {
+ struct regmap_async *async = map->bus->async_alloc();
+ if (!async)
+ return -ENOMEM;
+
+ async->work_buf = kzalloc(map->format.buf_size,
+ GFP_KERNEL | GFP_DMA);
+ if (!async->work_buf) {
+ kfree(async);
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&async->cleanup, async_cleanup);
+ async->map = map;
+
+ /* If the caller supplied the value we can use it safely. */
+ memcpy(async->work_buf, map->work_buf, map->format.pad_bytes +
+ map->format.reg_bytes + map->format.val_bytes);
+ if (val == work_val)
+ val = async->work_buf + map->format.pad_bytes +
+ map->format.reg_bytes;
+
+ spin_lock_irqsave(&map->async_lock, flags);
+ list_add_tail(&async->list, &map->async_list);
+ spin_unlock_irqrestore(&map->async_lock, flags);
+
+ ret = map->bus->async_write(map->bus_context, async->work_buf,
+ map->format.reg_bytes +
+ map->format.pad_bytes,
+ val, val_len, async);
+
+ if (ret != 0) {
+ dev_err(map->dev, "Failed to schedule write: %d\n",
+ ret);
+
+ spin_lock_irqsave(&map->async_lock, flags);
+ list_del(&async->list);
+ spin_unlock_irqrestore(&map->async_lock, flags);
+
+ kfree(async->work_buf);
+ kfree(async);
+ }
+ }
+
trace_regmap_hw_write_start(map->dev, reg,
val_len / map->format.val_bytes);
@@ -948,8 +1045,7 @@
* send the work_buf directly, otherwise try to do a gather
* write.
*/
- if (val == (map->work_buf + map->format.pad_bytes +
- map->format.reg_bytes))
+ if (val == work_val)
ret = map->bus->write(map->bus_context, map->work_buf,
map->format.reg_bytes +
map->format.pad_bytes +
@@ -981,14 +1077,62 @@
return ret;
}
+static int _regmap_bus_formatted_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ int ret;
+ struct regmap_range_node *range;
+ struct regmap *map = context;
+
+ BUG_ON(!map->bus || !map->format.format_write);
+
+ range = _regmap_range_lookup(map, reg);
+ if (range) {
+ ret = _regmap_select_page(map, ®, range, 1);
+ if (ret != 0)
+ return ret;
+ }
+
+ map->format.format_write(map, reg, val);
+
+ trace_regmap_hw_write_start(map->dev, reg, 1);
+
+ ret = map->bus->write(map->bus_context, map->work_buf,
+ map->format.buf_size);
+
+ trace_regmap_hw_write_done(map->dev, reg, 1);
+
+ return ret;
+}
+
+static int _regmap_bus_raw_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct regmap *map = context;
+
+ BUG_ON(!map->bus || !map->format.format_val);
+
+ map->format.format_val(map->work_buf + map->format.reg_bytes
+ + map->format.pad_bytes, val, 0);
+ return _regmap_raw_write(map, reg,
+ map->work_buf +
+ map->format.reg_bytes +
+ map->format.pad_bytes,
+ map->format.val_bytes, false);
+}
+
+static inline void *_regmap_map_get_context(struct regmap *map)
+{
+ return (map->bus) ? map : map->bus_context;
+}
+
int _regmap_write(struct regmap *map, unsigned int reg,
unsigned int val)
{
- struct regmap_range_node *range;
int ret;
- BUG_ON(!map->format.format_write && !map->format.format_val);
+ void *context = _regmap_map_get_context(map);
- if (!map->cache_bypass && map->format.format_write) {
+ if (!map->cache_bypass && !map->defer_caching) {
ret = regcache_write(map, reg, val);
if (ret != 0)
return ret;
@@ -1005,33 +1149,7 @@
trace_regmap_reg_write(map->dev, reg, val);
- if (map->format.format_write) {
- range = _regmap_range_lookup(map, reg);
- if (range) {
- ret = _regmap_select_page(map, ®, range, 1);
- if (ret != 0)
- return ret;
- }
-
- map->format.format_write(map, reg, val);
-
- trace_regmap_hw_write_start(map->dev, reg, 1);
-
- ret = map->bus->write(map->bus_context, map->work_buf,
- map->format.buf_size);
-
- trace_regmap_hw_write_done(map->dev, reg, 1);
-
- return ret;
- } else {
- map->format.format_val(map->work_buf + map->format.reg_bytes
- + map->format.pad_bytes, val, 0);
- return _regmap_raw_write(map, reg,
- map->work_buf +
- map->format.reg_bytes +
- map->format.pad_bytes,
- map->format.val_bytes);
- }
+ return map->reg_write(context, reg, val);
}
/**
@@ -1082,6 +1200,8 @@
{
int ret;
+ if (!map->bus)
+ return -EINVAL;
if (val_len % map->format.val_bytes)
return -EINVAL;
if (reg % map->reg_stride)
@@ -1089,7 +1209,7 @@
map->lock(map->lock_arg);
- ret = _regmap_raw_write(map, reg, val, val_len);
+ ret = _regmap_raw_write(map, reg, val, val_len, false);
map->unlock(map->lock_arg);
@@ -1118,6 +1238,8 @@
size_t val_bytes = map->format.val_bytes;
void *wval;
+ if (!map->bus)
+ return -EINVAL;
if (!map->format.parse_val)
return -EINVAL;
if (reg % map->reg_stride)
@@ -1145,14 +1267,15 @@
if (map->use_single_rw) {
for (i = 0; i < val_count; i++) {
ret = regmap_raw_write(map,
- reg + (i * map->reg_stride),
- val + (i * val_bytes),
- val_bytes);
+ reg + (i * map->reg_stride),
+ val + (i * val_bytes),
+ val_bytes);
if (ret != 0)
return ret;
}
} else {
- ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count);
+ ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count,
+ false);
}
if (val_bytes != 1)
@@ -1164,6 +1287,48 @@
}
EXPORT_SYMBOL_GPL(regmap_bulk_write);
+/**
+ * regmap_raw_write_async(): Write raw values to one or more registers
+ * asynchronously
+ *
+ * @map: Register map to write to
+ * @reg: Initial register to write to
+ * @val: Block of data to be written, laid out for direct transmission to the
+ * device. Must be valid until regmap_async_complete() is called.
+ * @val_len: Length of data pointed to by val.
+ *
+ * This function is intended to be used for things like firmware
+ * download where a large block of data needs to be transferred to the
+ * device. No formatting will be done on the data provided.
+ *
+ * If supported by the underlying bus the write will be scheduled
+ * asynchronously, helping maximise I/O speed on higher speed buses
+ * like SPI. regmap_async_complete() can be called to ensure that all
+ * asynchrnous writes have been completed.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int regmap_raw_write_async(struct regmap *map, unsigned int reg,
+ const void *val, size_t val_len)
+{
+ int ret;
+
+ if (val_len % map->format.val_bytes)
+ return -EINVAL;
+ if (reg % map->reg_stride)
+ return -EINVAL;
+
+ map->lock(map->lock_arg);
+
+ ret = _regmap_raw_write(map, reg, val, val_len, true);
+
+ map->unlock(map->lock_arg);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_raw_write_async);
+
static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
unsigned int val_len)
{
@@ -1171,6 +1336,8 @@
u8 *u8 = map->work_buf;
int ret;
+ BUG_ON(!map->bus);
+
range = _regmap_range_lookup(map, reg);
if (range) {
ret = _regmap_select_page(map, ®, range,
@@ -1202,10 +1369,29 @@
return ret;
}
+static int _regmap_bus_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+ struct regmap *map = context;
+
+ if (!map->format.parse_val)
+ return -EINVAL;
+
+ ret = _regmap_raw_read(map, reg, map->work_buf, map->format.val_bytes);
+ if (ret == 0)
+ *val = map->format.parse_val(map->work_buf);
+
+ return ret;
+}
+
static int _regmap_read(struct regmap *map, unsigned int reg,
unsigned int *val)
{
int ret;
+ void *context = _regmap_map_get_context(map);
+
+ BUG_ON(!map->reg_read);
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
@@ -1213,26 +1399,21 @@
return 0;
}
- if (!map->format.parse_val)
- return -EINVAL;
-
if (map->cache_only)
return -EBUSY;
- ret = _regmap_raw_read(map, reg, map->work_buf, map->format.val_bytes);
+ ret = map->reg_read(context, reg, val);
if (ret == 0) {
- *val = map->format.parse_val(map->work_buf);
-
#ifdef LOG_DEVICE
if (strcmp(dev_name(map->dev), LOG_DEVICE) == 0)
dev_info(map->dev, "%x => %x\n", reg, *val);
#endif
trace_regmap_reg_read(map->dev, reg, *val);
- }
- if (ret == 0 && !map->cache_bypass)
- regcache_write(map, reg, *val);
+ if (!map->cache_bypass)
+ regcache_write(map, reg, *val);
+ }
return ret;
}
@@ -1283,6 +1464,8 @@
unsigned int v;
int ret, i;
+ if (!map->bus)
+ return -EINVAL;
if (val_len % map->format.val_bytes)
return -EINVAL;
if (reg % map->reg_stride)
@@ -1334,6 +1517,8 @@
size_t val_bytes = map->format.val_bytes;
bool vol = regmap_volatile_range(map, reg, val_count);
+ if (!map->bus)
+ return -EINVAL;
if (!map->format.parse_val)
return -EINVAL;
if (reg % map->reg_stride)
@@ -1450,6 +1635,68 @@
}
EXPORT_SYMBOL_GPL(regmap_update_bits_check);
+void regmap_async_complete_cb(struct regmap_async *async, int ret)
+{
+ struct regmap *map = async->map;
+ bool wake;
+
+ spin_lock(&map->async_lock);
+
+ list_del(&async->list);
+ wake = list_empty(&map->async_list);
+
+ if (ret != 0)
+ map->async_ret = ret;
+
+ spin_unlock(&map->async_lock);
+
+ schedule_work(&async->cleanup);
+
+ if (wake)
+ wake_up(&map->async_waitq);
+}
+EXPORT_SYMBOL_GPL(regmap_async_complete_cb);
+
+static int regmap_async_is_done(struct regmap *map)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&map->async_lock, flags);
+ ret = list_empty(&map->async_list);
+ spin_unlock_irqrestore(&map->async_lock, flags);
+
+ return ret;
+}
+
+/**
+ * regmap_async_complete: Ensure all asynchronous I/O has completed.
+ *
+ * @map: Map to operate on.
+ *
+ * Blocks until any pending asynchronous I/O has completed. Returns
+ * an error code for any failed I/O operations.
+ */
+int regmap_async_complete(struct regmap *map)
+{
+ unsigned long flags;
+ int ret;
+
+ /* Nothing to do with no async support */
+ if (!map->bus->async_write)
+ return 0;
+
+ wait_event(map->async_waitq, regmap_async_is_done(map));
+
+ spin_lock_irqsave(&map->async_lock, flags);
+ ret = map->async_ret;
+ map->async_ret = 0;
+ spin_unlock_irqrestore(&map->async_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_async_complete);
+
/**
* regmap_register_patch: Register and apply register updates to be applied
* on device initialistion
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 564156a..5814deb 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -461,7 +461,7 @@
int op_len, err;
void *req_buf;
- if (!(((u64)1 << ((u64)op - 1)) & port->operations))
+ if (!(((u64)1 << (u64)op) & port->operations))
return -EOPNOTSUPP;
switch (op) {
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index 765fa2b..8766a22 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -844,6 +844,7 @@
swd->unit[drive].swd = swd;
}
+ spin_lock_init(&swd->lock);
swd->queue = blk_init_queue(do_fd_request, &swd->lock);
if (!swd->queue) {
err = -ENOMEM;
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index fe6d4be..e3f9a99 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -1041,7 +1041,7 @@
return hpet_alloc(&data);
}
-static int hpet_acpi_remove(struct acpi_device *device, int type)
+static int hpet_acpi_remove(struct acpi_device *device)
{
/* XXX need to unregister clocksource, dealloc mem, etc */
return -EINVAL;
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index d780295..6386a98 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1142,7 +1142,7 @@
return 0;
}
-static int sonypi_acpi_remove(struct acpi_device *device, int type)
+static int sonypi_acpi_remove(struct acpi_device *device)
{
sonypi_acpi_device = NULL;
return 0;
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ee90e87..14fde73 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,8 +1,13 @@
# common clock types
obj-$(CONFIG_HAVE_CLK) += clk-devres.o
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
-obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
- clk-mux.o clk-divider.o clk-fixed-factor.o
+obj-$(CONFIG_COMMON_CLK) += clk.o
+obj-$(CONFIG_COMMON_CLK) += clk-divider.o
+obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o
+obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
+obj-$(CONFIG_COMMON_CLK) += clk-gate.o
+obj-$(CONFIG_COMMON_CLK) += clk-mux.o
+
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
@@ -20,8 +25,8 @@
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
-obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
+obj-$(CONFIG_X86) += x86/
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index a9204c6..68b4021 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/string.h>
+#include <linux/log2.h>
/*
* DOC: basic adjustable divider clock that cannot gate
@@ -29,8 +30,7 @@
#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-#define div_mask(d) ((1 << (d->width)) - 1)
-#define is_power_of_two(i) !(i & ~i)
+#define div_mask(d) ((1 << ((d)->width)) - 1)
static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
{
@@ -137,7 +137,7 @@
static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
{
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
- return is_power_of_two(div);
+ return is_power_of_2(div);
if (divider->table)
return _is_valid_table_div(divider->table, div);
return true;
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index a489985..1ef271e 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -28,8 +28,11 @@
unsigned long parent_rate)
{
struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+ unsigned long long int rate;
- return parent_rate * fix->mult / fix->div;
+ rate = (unsigned long long int)parent_rate * fix->mult;
+ do_div(rate, fix->div);
+ return (unsigned long)rate;
}
static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index af78ed6..dc58fbd 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -85,7 +85,7 @@
/**
* of_fixed_clk_setup() - Setup function for simple fixed rate clock
*/
-void __init of_fixed_clk_setup(struct device_node *node)
+void of_fixed_clk_setup(struct device_node *node)
{
struct clk *clk;
const char *clk_name = node->name;
@@ -101,4 +101,5 @@
of_clk_add_provider(node, of_clk_src_simple_get, clk);
}
EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
+CLK_OF_DECLARE(fixed_clk, "fixed-clock", of_fixed_clk_setup);
#endif
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 52fecad..2e08cb0 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -182,8 +182,10 @@
reg |= HB_PLL_EXT_ENA;
reg &= ~HB_PLL_EXT_BYPASS;
} else {
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
reg &= ~HB_PLL_DIVQ_MASK;
reg |= divq << HB_PLL_DIVQ_SHIFT;
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
}
writel(reg, hbclk->reg);
@@ -314,33 +316,23 @@
{
hb_clk_init(node, &clk_pll_ops);
}
+CLK_OF_DECLARE(hb_pll, "calxeda,hb-pll-clock", hb_pll_init);
static void __init hb_a9periph_init(struct device_node *node)
{
hb_clk_init(node, &a9periphclk_ops);
}
+CLK_OF_DECLARE(hb_a9periph, "calxeda,hb-a9periph-clock", hb_a9periph_init);
static void __init hb_a9bus_init(struct device_node *node)
{
struct clk *clk = hb_clk_init(node, &a9bclk_ops);
clk_prepare_enable(clk);
}
+CLK_OF_DECLARE(hb_a9bus, "calxeda,hb-a9bus-clock", hb_a9bus_init);
static void __init hb_emmc_init(struct device_node *node)
{
hb_clk_init(node, &periclk_ops);
}
-
-static const __initconst struct of_device_id clk_match[] = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { .compatible = "calxeda,hb-pll-clock", .data = hb_pll_init, },
- { .compatible = "calxeda,hb-a9periph-clock", .data = hb_a9periph_init, },
- { .compatible = "calxeda,hb-a9bus-clock", .data = hb_a9bus_init, },
- { .compatible = "calxeda,hb-emmc-clock", .data = hb_emmc_init, },
- {}
-};
-
-void __init highbank_clocks_init(void)
-{
- of_clk_init(clk_match);
-}
+CLK_OF_DECLARE(hb_emmc, "calxeda,hb-emmc-clock", hb_emmc_init);
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index d098f72..9f57bc3 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -44,33 +44,23 @@
struct clk_lookup *lookup;
};
-static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+static struct max77686_clk *to_max77686_clk(struct clk_hw *hw)
{
return container_of(hw, struct max77686_clk, hw);
}
static int max77686_clk_prepare(struct clk_hw *hw)
{
- struct max77686_clk *max77686;
- int ret;
+ struct max77686_clk *max77686 = to_max77686_clk(hw);
- max77686 = get_max77686_clk(hw);
- if (!max77686)
- return -ENOMEM;
-
- ret = regmap_update_bits(max77686->iodev->regmap,
- MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
-
- return ret;
+ return regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask,
+ max77686->mask);
}
static void max77686_clk_unprepare(struct clk_hw *hw)
{
- struct max77686_clk *max77686;
-
- max77686 = get_max77686_clk(hw);
- if (!max77686)
- return;
+ struct max77686_clk *max77686 = to_max77686_clk(hw);
regmap_update_bits(max77686->iodev->regmap,
MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
@@ -78,14 +68,10 @@
static int max77686_clk_is_enabled(struct clk_hw *hw)
{
- struct max77686_clk *max77686;
+ struct max77686_clk *max77686 = to_max77686_clk(hw);
int ret;
u32 val;
- max77686 = get_max77686_clk(hw);
- if (!max77686)
- return -ENOMEM;
-
ret = regmap_read(max77686->iodev->regmap,
MAX77686_REG_32KHZ, &val);
@@ -130,9 +116,8 @@
if (IS_ERR(clk))
return -ENOMEM;
- max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
- GFP_KERNEL);
- if (IS_ERR(max77686->lookup))
+ max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL);
+ if (!max77686->lookup)
return -ENOMEM;
max77686->lookup->con_id = hw->init->name;
@@ -151,13 +136,13 @@
max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
* MAX77686_CLKS_NUM, GFP_KERNEL);
- if (IS_ERR(max77686_clks))
+ if (!max77686_clks)
return -ENOMEM;
for (i = 0; i < MAX77686_CLKS_NUM; i++) {
max77686_clks[i] = devm_kzalloc(&pdev->dev,
sizeof(struct max77686_clk), GFP_KERNEL);
- if (IS_ERR(max77686_clks[i]))
+ if (!max77686_clks[i])
return -ENOMEM;
}
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
index a203ecc..f8e9d0c 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/clk-prima2.c
@@ -1025,20 +1025,67 @@
{},
};
+enum prima2_clk_index {
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
+ mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0,
+ spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1,
+ usp2, vip, gfx, mm, lcd, vpp, mmc01, mmc23, mmc45, usbpll,
+ usb0, usb1, maxclk,
+};
+
+static __initdata struct clk_hw* prima2_clk_hw_array[maxclk] = {
+ NULL, /* dummy */
+ NULL,
+ &clk_pll1.hw,
+ &clk_pll2.hw,
+ &clk_pll3.hw,
+ &clk_mem.hw,
+ &clk_sys.hw,
+ &clk_security.hw,
+ &clk_dsp.hw,
+ &clk_gps.hw,
+ &clk_mf.hw,
+ &clk_io.hw,
+ &clk_cpu.hw,
+ &clk_uart0.hw,
+ &clk_uart1.hw,
+ &clk_uart2.hw,
+ &clk_tsc.hw,
+ &clk_i2c0.hw,
+ &clk_i2c1.hw,
+ &clk_spi0.hw,
+ &clk_spi1.hw,
+ &clk_pwmc.hw,
+ &clk_efuse.hw,
+ &clk_pulse.hw,
+ &clk_dmac0.hw,
+ &clk_dmac1.hw,
+ &clk_nand.hw,
+ &clk_audio.hw,
+ &clk_usp0.hw,
+ &clk_usp1.hw,
+ &clk_usp2.hw,
+ &clk_vip.hw,
+ &clk_gfx.hw,
+ &clk_mm.hw,
+ &clk_lcd.hw,
+ &clk_vpp.hw,
+ &clk_mmc01.hw,
+ &clk_mmc23.hw,
+ &clk_mmc45.hw,
+ &usb_pll_clk_hw,
+ &clk_usb0.hw,
+ &clk_usb1.hw,
+};
+
+static struct clk *prima2_clks[maxclk];
+static struct clk_onecell_data clk_data;
+
void __init sirfsoc_of_clk_init(void)
{
- struct clk *clk;
struct device_node *np;
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- panic("unable to find compatible clkc node in dtb\n");
-
- sirfsoc_clk_vbase = of_iomap(np, 0);
- if (!sirfsoc_clk_vbase)
- panic("unable to map clkc registers\n");
-
- of_node_put(np);
+ int i;
np = of_find_matching_node(NULL, rsc_ids);
if (!np)
@@ -1050,122 +1097,30 @@
of_node_put(np);
+ np = of_find_matching_node(NULL, clkc_ids);
+ if (!np)
+ return;
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
/* These are always available (RTC and 26MHz OSC)*/
- clk = clk_register_fixed_rate(NULL, "rtc", NULL,
+ prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
CLK_IS_ROOT, 32768);
- BUG_ON(IS_ERR(clk));
- clk = clk_register_fixed_rate(NULL, "osc", NULL,
+ prima2_clks[osc]= clk_register_fixed_rate(NULL, "osc", NULL,
CLK_IS_ROOT, 26000000);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_pll1.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_pll2.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_pll3.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_mem.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_sys.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_security.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b8030000.security");
- clk = clk_register(NULL, &clk_dsp.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_gps.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "a8010000.gps");
- clk = clk_register(NULL, &clk_mf.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_io.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "io");
- clk = clk_register(NULL, &clk_cpu.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "cpu");
- clk = clk_register(NULL, &clk_uart0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0050000.uart");
- clk = clk_register(NULL, &clk_uart1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0060000.uart");
- clk = clk_register(NULL, &clk_uart2.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0070000.uart");
- clk = clk_register(NULL, &clk_tsc.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0110000.tsc");
- clk = clk_register(NULL, &clk_i2c0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00e0000.i2c");
- clk = clk_register(NULL, &clk_i2c1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00f0000.i2c");
- clk = clk_register(NULL, &clk_spi0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00d0000.spi");
- clk = clk_register(NULL, &clk_spi1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0170000.spi");
- clk = clk_register(NULL, &clk_pwmc.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0130000.pwm");
- clk = clk_register(NULL, &clk_efuse.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0140000.efusesys");
- clk = clk_register(NULL, &clk_pulse.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0150000.pulsec");
- clk = clk_register(NULL, &clk_dmac0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
- clk = clk_register(NULL, &clk_dmac1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
- clk = clk_register(NULL, &clk_nand.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0030000.nand");
- clk = clk_register(NULL, &clk_audio.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0040000.audio");
- clk = clk_register(NULL, &clk_usp0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0080000.usp");
- clk = clk_register(NULL, &clk_usp1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b0090000.usp");
- clk = clk_register(NULL, &clk_usp2.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00a0000.usp");
- clk = clk_register(NULL, &clk_vip.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00c0000.vip");
- clk = clk_register(NULL, &clk_gfx.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "98000000.graphics");
- clk = clk_register(NULL, &clk_mm.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "a0000000.multimedia");
- clk = clk_register(NULL, &clk_lcd.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "90010000.display");
- clk = clk_register(NULL, &clk_vpp.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "90020000.vpp");
- clk = clk_register(NULL, &clk_mmc01.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_mmc23.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_mmc45.hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &usb_pll_clk_hw);
- BUG_ON(IS_ERR(clk));
- clk = clk_register(NULL, &clk_usb0.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00e0000.usb");
- clk = clk_register(NULL, &clk_usb1.hw);
- BUG_ON(IS_ERR(clk));
- clk_register_clkdev(clk, NULL, "b00f0000.usb");
+ for (i = pll1; i < maxclk; i++) {
+ prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
+ BUG_ON(!prima2_clks[i]);
+ }
+ clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
+ clk_register_clkdev(prima2_clks[io], NULL, "io");
+ clk_register_clkdev(prima2_clks[mem], NULL, "mem");
+
+ clk_data.clks = prima2_clks;
+ clk_data.clk_num = maxclk;
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c
deleted file mode 100644
index 0e831b5..0000000
--- a/drivers/clk/clk-sunxi.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/clk/sunxi.h>
-#include <linux/of.h>
-
-static const __initconst struct of_device_id clk_match[] = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- {}
-};
-
-void __init sunxi_init_clocks(void)
-{
- of_clk_init(clk_match);
-}
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index fe25570..b5538bb 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -41,6 +41,7 @@
#define PLL_TYPE_VT8500 0
#define PLL_TYPE_WM8650 1
+#define PLL_TYPE_WM8750 2
struct clk_pll {
struct clk_hw hw;
@@ -121,7 +122,16 @@
unsigned long *prate)
{
struct clk_device *cdev = to_clk_device(hw);
- u32 divisor = *prate / rate;
+ u32 divisor;
+
+ if (rate == 0)
+ return 0;
+
+ divisor = *prate / rate;
+
+ /* If prate / rate would be decimal, incr the divisor */
+ if (rate * divisor < *prate)
+ divisor++;
/*
* If this is a request for SDMMC we have to adjust the divisor
@@ -138,9 +148,18 @@
unsigned long parent_rate)
{
struct clk_device *cdev = to_clk_device(hw);
- u32 divisor = parent_rate / rate;
+ u32 divisor;
unsigned long flags = 0;
+ if (rate == 0)
+ return 0;
+
+ divisor = parent_rate / rate;
+
+ /* If prate / rate would be decimal, incr the divisor */
+ if (rate * divisor < *prate)
+ divisor++;
+
if (divisor == cdev->div_mask + 1)
divisor = 0;
@@ -272,7 +291,7 @@
rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
}
-
+CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init);
/* PLL clock related functions */
@@ -298,6 +317,16 @@
#define WM8650_BITS_TO_VAL(m, d1, d2) \
((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+/* Helper macros for PLL_WM8750 */
+#define WM8750_PLL_MUL(x) (((x >> 16) & 0xFF) + 1)
+#define WM8750_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 7)))
+
+#define WM8750_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * (m+1) / ((d1+1) * (1 << d2)))
+
+#define WM8750_BITS_TO_VAL(f, m, d1, d2) \
+ ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)
+
static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
u32 *multiplier, u32 *prediv)
@@ -361,16 +390,87 @@
/* if we got here, it wasn't an exact match */
pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
rate - best_err);
- *multiplier = mul;
- *divisor1 = div1;
- *divisor2 = div2;
+ *multiplier = best_mul;
+ *divisor1 = best_div1;
+ *divisor2 = best_div2;
+}
+
+static u32 wm8750_get_filter(u32 parent_rate, u32 divisor1)
+{
+ /* calculate frequency (MHz) after pre-divisor */
+ u32 freq = (parent_rate / 1000000) / (divisor1 + 1);
+
+ if ((freq < 10) || (freq > 200))
+ pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n",
+ __func__, freq);
+
+ if (freq >= 166)
+ return 7;
+ else if (freq >= 104)
+ return 6;
+ else if (freq >= 65)
+ return 5;
+ else if (freq >= 42)
+ return 4;
+ else if (freq >= 26)
+ return 3;
+ else if (freq >= 16)
+ return 2;
+ else if (freq >= 10)
+ return 1;
+
+ return 0;
+}
+
+static void wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *filter, u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+ u32 mul, div1, div2;
+ u32 best_mul, best_div1, best_div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 1; div1 >= 0; div1--)
+ for (div2 = 7; div2 >= 0; div2--)
+ for (mul = 0; mul <= 255; mul++) {
+ tclk = parent_rate * (mul + 1) / ((div1 + 1) * (1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *filter = wm8750_get_filter(parent_rate, div1);
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ best_mul = mul;
+ best_div1 = div1;
+ best_div2 = div2;
+ }
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+
+ *filter = wm8750_get_filter(parent_rate, best_div1);
+ *multiplier = best_mul;
+ *divisor1 = best_div1;
+ *divisor2 = best_div2;
}
static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
- u32 mul, div1, div2;
+ u32 filter, mul, div1, div2;
u32 pll_val;
unsigned long flags = 0;
@@ -385,6 +485,9 @@
wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
break;
+ case PLL_TYPE_WM8750:
+ wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
+ pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
default:
pr_err("%s: invalid pll type\n", __func__);
return 0;
@@ -405,7 +508,7 @@
unsigned long *prate)
{
struct clk_pll *pll = to_clk_pll(hw);
- u32 mul, div1, div2;
+ u32 filter, mul, div1, div2;
long round_rate;
switch (pll->type) {
@@ -417,6 +520,9 @@
wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
break;
+ case PLL_TYPE_WM8750:
+ wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
+ round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
default:
round_rate = 0;
}
@@ -440,6 +546,10 @@
pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
pll_freq /= WM8650_PLL_DIV(pll_val);
break;
+ case PLL_TYPE_WM8750:
+ pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
+ pll_freq /= WM8750_PLL_DIV(pll_val);
+ break;
default:
pll_freq = 0;
}
@@ -502,20 +612,19 @@
{
vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
}
+CLK_OF_DECLARE(vt8500_pll, "via,vt8500-pll-clock", vt8500_pll_init);
static void __init wm8650_pll_init(struct device_node *node)
{
vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
}
+CLK_OF_DECLARE(wm8650_pll, "wm,wm8650-pll-clock", wm8650_pll_init);
-static const __initconst struct of_device_id clk_match[] = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, },
- { .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, },
- { .compatible = "via,vt8500-device-clock",
- .data = vtwm_device_clk_init, },
- { /* sentinel */ }
-};
+static void __init wm8750_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8750);
+}
+CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init);
void __init vtwm_clk_init(void __iomem *base)
{
@@ -524,5 +633,5 @@
pmc_base = base;
- of_clk_init(clk_match);
+ of_clk_init(NULL);
}
diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c
index 37a3051..b14a25f 100644
--- a/drivers/clk/clk-zynq.c
+++ b/drivers/clk/clk-zynq.c
@@ -81,6 +81,7 @@
if (WARN_ON(ret))
return;
}
+CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup);
struct zynq_periph_clk {
struct clk_hw hw;
@@ -187,6 +188,7 @@
if (WARN_ON(err))
return;
}
+CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup);
/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
* derivative rates depend on CLK_621_TRUE
@@ -366,18 +368,10 @@
if (WARN_ON(err))
return;
}
-
-static const __initconst struct of_device_id zynq_clk_match[] = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, },
- { .compatible = "xlnx,zynq-periph-clock",
- .data = zynq_periph_clk_setup, },
- { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, },
- {}
-};
+CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup);
void __init xilinx_zynq_clocks_init(void __iomem *slcr)
{
slcr_base = slcr;
- of_clk_init(zynq_clk_match);
+ of_clk_init(NULL);
}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 251e45d..fabbfe1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/device.h>
+#include <linux/init.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
@@ -35,6 +36,137 @@
static struct dentry *orphandir;
static int inited = 0;
+static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level)
+{
+ if (!c)
+ return;
+
+ seq_printf(s, "%*s%-*s %-11d %-12d %-10lu",
+ level * 3 + 1, "",
+ 30 - level * 3, c->name,
+ c->enable_count, c->prepare_count, c->rate);
+ seq_printf(s, "\n");
+}
+
+static void clk_summary_show_subtree(struct seq_file *s, struct clk *c,
+ int level)
+{
+ struct clk *child;
+ struct hlist_node *tmp;
+
+ if (!c)
+ return;
+
+ clk_summary_show_one(s, c, level);
+
+ hlist_for_each_entry(child, tmp, &c->children, child_node)
+ clk_summary_show_subtree(s, child, level + 1);
+}
+
+static int clk_summary_show(struct seq_file *s, void *data)
+{
+ struct clk *c;
+ struct hlist_node *tmp;
+
+ seq_printf(s, " clock enable_cnt prepare_cnt rate\n");
+ seq_printf(s, "---------------------------------------------------------------------\n");
+
+ mutex_lock(&prepare_lock);
+
+ hlist_for_each_entry(c, tmp, &clk_root_list, child_node)
+ clk_summary_show_subtree(s, c, 0);
+
+ hlist_for_each_entry(c, tmp, &clk_orphan_list, child_node)
+ clk_summary_show_subtree(s, c, 0);
+
+ mutex_unlock(&prepare_lock);
+
+ return 0;
+}
+
+
+static int clk_summary_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_summary_show, inode->i_private);
+}
+
+static const struct file_operations clk_summary_fops = {
+ .open = clk_summary_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void clk_dump_one(struct seq_file *s, struct clk *c, int level)
+{
+ if (!c)
+ return;
+
+ seq_printf(s, "\"%s\": { ", c->name);
+ seq_printf(s, "\"enable_count\": %d,", c->enable_count);
+ seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
+ seq_printf(s, "\"rate\": %lu", c->rate);
+}
+
+static void clk_dump_subtree(struct seq_file *s, struct clk *c, int level)
+{
+ struct clk *child;
+ struct hlist_node *tmp;
+
+ if (!c)
+ return;
+
+ clk_dump_one(s, c, level);
+
+ hlist_for_each_entry(child, tmp, &c->children, child_node) {
+ seq_printf(s, ",");
+ clk_dump_subtree(s, child, level + 1);
+ }
+
+ seq_printf(s, "}");
+}
+
+static int clk_dump(struct seq_file *s, void *data)
+{
+ struct clk *c;
+ struct hlist_node *tmp;
+ bool first_node = true;
+
+ seq_printf(s, "{");
+
+ mutex_lock(&prepare_lock);
+
+ hlist_for_each_entry(c, tmp, &clk_root_list, child_node) {
+ if (!first_node)
+ seq_printf(s, ",");
+ first_node = false;
+ clk_dump_subtree(s, c, 0);
+ }
+
+ hlist_for_each_entry(c, tmp, &clk_orphan_list, child_node) {
+ seq_printf(s, ",");
+ clk_dump_subtree(s, c, 0);
+ }
+
+ mutex_unlock(&prepare_lock);
+
+ seq_printf(s, "}");
+ return 0;
+}
+
+
+static int clk_dump_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dump, inode->i_private);
+}
+
+static const struct file_operations clk_dump_fops = {
+ .open = clk_dump_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/* caller must hold prepare_lock */
static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry)
{
@@ -168,12 +300,23 @@
{
struct clk *clk;
struct hlist_node *tmp;
+ struct dentry *d;
rootdir = debugfs_create_dir("clk", NULL);
if (!rootdir)
return -ENOMEM;
+ d = debugfs_create_file("clk_summary", S_IRUGO, rootdir, NULL,
+ &clk_summary_fops);
+ if (!d)
+ return -ENOMEM;
+
+ d = debugfs_create_file("clk_dump", S_IRUGO, rootdir, NULL,
+ &clk_dump_fops);
+ if (!d)
+ return -ENOMEM;
+
orphandir = debugfs_create_dir("orphans", rootdir);
if (!orphandir)
@@ -259,32 +402,33 @@
/*** helper functions ***/
-inline const char *__clk_get_name(struct clk *clk)
+const char *__clk_get_name(struct clk *clk)
{
return !clk ? NULL : clk->name;
}
+EXPORT_SYMBOL_GPL(__clk_get_name);
-inline struct clk_hw *__clk_get_hw(struct clk *clk)
+struct clk_hw *__clk_get_hw(struct clk *clk)
{
return !clk ? NULL : clk->hw;
}
-inline u8 __clk_get_num_parents(struct clk *clk)
+u8 __clk_get_num_parents(struct clk *clk)
{
return !clk ? 0 : clk->num_parents;
}
-inline struct clk *__clk_get_parent(struct clk *clk)
+struct clk *__clk_get_parent(struct clk *clk)
{
return !clk ? NULL : clk->parent;
}
-inline unsigned int __clk_get_enable_count(struct clk *clk)
+unsigned int __clk_get_enable_count(struct clk *clk)
{
return !clk ? 0 : clk->enable_count;
}
-inline unsigned int __clk_get_prepare_count(struct clk *clk)
+unsigned int __clk_get_prepare_count(struct clk *clk)
{
return !clk ? 0 : clk->prepare_count;
}
@@ -310,7 +454,7 @@
return ret;
}
-inline unsigned long __clk_get_flags(struct clk *clk)
+unsigned long __clk_get_flags(struct clk *clk)
{
return !clk ? 0 : clk->flags;
}
@@ -950,9 +1094,6 @@
/* change the rates */
clk_change_rate(top);
- mutex_unlock(&prepare_lock);
-
- return 0;
out:
mutex_unlock(&prepare_lock);
@@ -1663,6 +1804,11 @@
void *data;
};
+extern struct of_device_id __clk_of_table[];
+
+static const struct of_device_id __clk_of_table_sentinel
+ __used __section(__clk_of_table_end);
+
static LIST_HEAD(of_clk_providers);
static DEFINE_MUTEX(of_clk_lock);
@@ -1791,6 +1937,9 @@
{
struct device_node *np;
+ if (!matches)
+ matches = __clk_of_table;
+
for_each_matching_node(np, matches) {
const struct of_device_id *match = of_match_node(matches, np);
of_clk_init_cb_t clk_init_cb = match->data;
diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c
index 8fa5408..ebf141d 100644
--- a/drivers/clk/mvebu/clk-gating-ctrl.c
+++ b/drivers/clk/mvebu/clk-gating-ctrl.c
@@ -193,6 +193,7 @@
{ "runit", NULL, 7 },
{ "xor0", NULL, 8 },
{ "audio", NULL, 9 },
+ { "powersave", "cpuclk", 11 },
{ "sata0", NULL, 14 },
{ "sata1", NULL, 15 },
{ "xor1", NULL, 16 },
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index 8dd476e..b5c06f9 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -99,7 +99,7 @@
int __init mx23_clocks_init(void)
{
struct device_node *np;
- int i;
+ u32 i;
clk_misc_init();
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index db3af08..126370a 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -154,7 +154,7 @@
int __init mx28_clocks_init(void)
{
struct device_node *np;
- int i;
+ u32 i;
clk_misc_init();
diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
index dcb6ae0..256c8be 100644
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -144,3 +144,4 @@
vexpress_config_func_put(osc->func);
kfree(osc);
}
+CLK_OF_DECLARE(vexpress_soc, "arm,vexpress-osc", vexpress_osc_of_setup);
diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c
index c742ac7..f889f2f 100644
--- a/drivers/clk/versatile/clk-vexpress.c
+++ b/drivers/clk/versatile/clk-vexpress.c
@@ -99,19 +99,13 @@
return vexpress_sp810_timerclken[clkspec->args[0]];
}
-static const __initconst struct of_device_id vexpress_fixed_clk_match[] = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, },
- {}
-};
-
void __init vexpress_clk_of_init(void)
{
struct device_node *node;
struct clk *clk;
struct clk *refclk, *timclk;
- of_clk_init(vexpress_fixed_clk_match);
+ of_clk_init(NULL);
node = of_find_compatible_node(NULL, NULL, "arm,sp810");
vexpress_sp810_init(of_iomap(node, 0));
diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
new file mode 100644
index 0000000..f9ba4fa
--- /dev/null
+++ b/drivers/clk/x86/Makefile
@@ -0,0 +1,2 @@
+clk-x86-lpss-objs := clk-lpss.o clk-lpt.o
+obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
diff --git a/drivers/clk/x86/clk-lpss.c b/drivers/clk/x86/clk-lpss.c
new file mode 100644
index 0000000..b5e229f
--- /dev/null
+++ b/drivers/clk/x86/clk-lpss.c
@@ -0,0 +1,99 @@
+/*
+ * Intel Low Power Subsystem clocks.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+static int clk_lpss_is_mmio_resource(struct acpi_resource *res, void *data)
+{
+ struct resource r;
+ return !acpi_dev_resource_memory(res, &r);
+}
+
+static acpi_status clk_lpss_find_mmio(acpi_handle handle, u32 level,
+ void *data, void **retval)
+{
+ struct resource_list_entry *rentry;
+ struct list_head resource_list;
+ struct acpi_device *adev;
+ const char *uid = data;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (uid) {
+ if (!adev->pnp.unique_id)
+ return AE_OK;
+ if (strcmp(uid, adev->pnp.unique_id))
+ return AE_OK;
+ }
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ clk_lpss_is_mmio_resource, NULL);
+ if (ret < 0)
+ return AE_NO_MEMORY;
+
+ list_for_each_entry(rentry, &resource_list, node)
+ if (resource_type(&rentry->res) == IORESOURCE_MEM) {
+ *(struct resource *)retval = rentry->res;
+ break;
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+ return AE_OK;
+}
+
+/**
+ * clk_register_lpss_gate - register LPSS clock gate
+ * @name: name of this clock gate
+ * @parent_name: parent clock name
+ * @hid: ACPI _HID of the device
+ * @uid: ACPI _UID of the device (optional)
+ * @offset: LPSS PRV_CLOCK_PARAMS offset
+ *
+ * Creates and registers LPSS clock gate.
+ */
+struct clk *clk_register_lpss_gate(const char *name, const char *parent_name,
+ const char *hid, const char *uid,
+ unsigned offset)
+{
+ struct resource res = { };
+ void __iomem *mmio_base;
+ acpi_status status;
+ struct clk *clk;
+
+ /*
+ * First try to look the device and its mmio resource from the
+ * ACPI namespace.
+ */
+ status = acpi_get_devices(hid, clk_lpss_find_mmio, (void *)uid,
+ (void **)&res);
+ if (ACPI_FAILURE(status) || !res.start)
+ return ERR_PTR(-ENODEV);
+
+ mmio_base = ioremap(res.start, resource_size(&res));
+ if (!mmio_base)
+ return ERR_PTR(-ENOMEM);
+
+ clk = clk_register_gate(NULL, name, parent_name, 0, mmio_base + offset,
+ 0, 0, NULL);
+ if (IS_ERR(clk))
+ iounmap(mmio_base);
+
+ return clk;
+}
diff --git a/drivers/clk/x86/clk-lpss.h b/drivers/clk/x86/clk-lpss.h
new file mode 100644
index 0000000..e9460f4
--- /dev/null
+++ b/drivers/clk/x86/clk-lpss.h
@@ -0,0 +1,36 @@
+/*
+ * Intel Low Power Subsystem clock.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CLK_LPSS_H
+#define __CLK_LPSS_H
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+
+#ifdef CONFIG_ACPI
+extern struct clk *clk_register_lpss_gate(const char *name,
+ const char *parent_name,
+ const char *hid, const char *uid,
+ unsigned offset);
+#else
+static inline struct clk *clk_register_lpss_gate(const char *name,
+ const char *parent_name,
+ const char *hid,
+ const char *uid,
+ unsigned offset)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
+
+#endif /* __CLK_LPSS_H */
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
new file mode 100644
index 0000000..81298ae
--- /dev/null
+++ b/drivers/clk/x86/clk-lpt.c
@@ -0,0 +1,86 @@
+/*
+ * Intel Lynxpoint LPSS clocks.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "clk-lpss.h"
+
+#define PRV_CLOCK_PARAMS 0x800
+
+static int lpt_clk_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+
+ /* LPSS free running clock */
+ clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
+ 100000000);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ /* Shared DMA clock */
+ clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+
+ /* SPI clocks */
+ clk = clk_register_lpss_gate("spi0_clk", "lpss_clk", "INT33C0", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C0:00");
+
+ clk = clk_register_lpss_gate("spi1_clk", "lpss_clk", "INT33C1", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C1:00");
+
+ /* I2C clocks */
+ clk = clk_register_lpss_gate("i2c0_clk", "lpss_clk", "INT33C2", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C2:00");
+
+ clk = clk_register_lpss_gate("i2c1_clk", "lpss_clk", "INT33C3", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C3:00");
+
+ /* UART clocks */
+ clk = clk_register_lpss_gate("uart0_clk", "lpss_clk", "INT33C4", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C4:00");
+
+ clk = clk_register_lpss_gate("uart1_clk", "lpss_clk", "INT33C5", NULL,
+ PRV_CLOCK_PARAMS);
+ if (!IS_ERR(clk))
+ clk_register_clkdev(clk, NULL, "INT33C5:00");
+
+ return 0;
+}
+
+static struct platform_driver lpt_clk_driver = {
+ .driver = {
+ .name = "clk-lpt",
+ .owner = THIS_MODULE,
+ },
+ .probe = lpt_clk_probe,
+};
+
+static int __init lpt_clk_init(void)
+{
+ return platform_driver_register(&lpt_clk_driver);
+}
+arch_initcall(lpt_clk_init);
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 3cd1bd3..93d09d0 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -23,7 +23,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
-#include <linux/clk/sunxi.h>
+#include <linux/clk-provider.h>
#define TIMER_CTL_REG 0x00
#define TIMER_CTL_ENABLE (1 << 0)
@@ -124,7 +124,7 @@
if (irq <= 0)
panic("Can't parse IRQ");
- sunxi_init_clocks();
+ of_clk_init(NULL);
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index e0a899f..cbcb21e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -185,7 +185,7 @@
If in doubt, say N.
config GENERIC_CPUFREQ_CPU0
- bool "Generic CPU0 cpufreq driver"
+ tristate "Generic CPU0 cpufreq driver"
depends on HAVE_CLK && REGULATOR && PM_OPP && OF
select CPU_FREQ_TABLE
help
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a0b3661..7f333af 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -77,9 +77,39 @@
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
+config ARM_KIRKWOOD_CPUFREQ
+ def_bool ARCH_KIRKWOOD && OF
+ help
+ This adds the CPUFreq driver for Marvell Kirkwood
+ SoCs.
+
+config ARM_IMX6Q_CPUFREQ
+ tristate "Freescale i.MX6Q cpufreq support"
+ depends on SOC_IMX6Q
+ depends on REGULATOR_ANATOP
+ help
+ This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+ If in doubt, say N.
+
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK
+ select CPU_FREQ_TABLE
+ select GENERIC_CPUFREQ_CPU0
+ select PM_OPP
+ select REGULATOR
+
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 7227cd7..98e5abb 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -2,6 +2,19 @@
# x86 CPU Frequency scaling drivers
#
+config X86_INTEL_PSTATE
+ bool "Intel P state control"
+ depends on X86
+ help
+ This driver provides a P state for Intel core processors.
+ The driver implements an internal governor and will become
+ the scaling driver and governor for Sandy bridge processors.
+
+ When this driver is enabled it will become the perferred
+ scaling driver for Sandy bridge processors.
+
+ If in doubt, say N.
+
config X86_PCC_CPUFREQ
tristate "Processor Clocking Control interface driver"
depends on ACPI && ACPI_PROCESSOR
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fadc4d4..5399c45 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -19,11 +19,12 @@
##################################################################################
# x86 drivers.
# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
-# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# K8 systems. This is still the case but acpi-cpufreq errors out so that
+# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers.
# speedstep-* is preferred over p4-clockmod.
-obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
@@ -39,6 +40,7 @@
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
+obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
##################################################################################
# ARM SoC drivers
@@ -50,8 +52,11 @@
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
-obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
+obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 7b0d49d..937bc28 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -734,7 +734,7 @@
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
- if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) {
+ if (bios_with_sw_any_bug && !policy_is_shared(policy)) {
policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
cpumask_copy(policy->cpus, cpu_core_mask(cpu));
}
@@ -762,6 +762,12 @@
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 0xf) {
+ pr_debug("AMD K8 systems must use native drivers.\n");
+ result = -ENODEV;
+ goto err_unreg;
+ }
pr_debug("SYSTEM IO addr space\n");
data->cpu_feature = SYSTEM_IO_CAPABLE;
break;
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index debc5a7..4e5b7fb 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -12,12 +12,12 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
-#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/opp.h>
+#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -146,7 +146,6 @@
* share the clock and voltage and clock. Use cpufreq affected_cpus
* interface to have all CPUs scaled together.
*/
- policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
cpumask_setall(policy->cpus);
cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
@@ -177,34 +176,32 @@
.attr = cpu0_cpufreq_attr,
};
-static int cpu0_cpufreq_driver_init(void)
+static int cpu0_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *np;
int ret;
- np = of_find_node_by_path("/cpus/cpu@0");
+ for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ if (of_get_property(np, "operating-points", NULL))
+ break;
+ }
+
if (!np) {
pr_err("failed to find cpu0 node\n");
return -ENOENT;
}
- cpu_dev = get_cpu_device(0);
- if (!cpu_dev) {
- pr_err("failed to get cpu0 device\n");
- ret = -ENODEV;
- goto out_put_node;
- }
-
+ cpu_dev = &pdev->dev;
cpu_dev->of_node = np;
- cpu_clk = clk_get(cpu_dev, NULL);
+ cpu_clk = devm_clk_get(cpu_dev, NULL);
if (IS_ERR(cpu_clk)) {
ret = PTR_ERR(cpu_clk);
pr_err("failed to get cpu0 clock: %d\n", ret);
goto out_put_node;
}
- cpu_reg = regulator_get(cpu_dev, "cpu0");
+ cpu_reg = devm_regulator_get(cpu_dev, "cpu0");
if (IS_ERR(cpu_reg)) {
pr_warn("failed to get cpu0 regulator\n");
cpu_reg = NULL;
@@ -267,7 +264,24 @@
of_node_put(np);
return ret;
}
-late_initcall(cpu0_cpufreq_driver_init);
+
+static int cpu0_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_unregister_driver(&cpu0_cpufreq_driver);
+ opp_free_cpufreq_table(cpu_dev, &freq_table);
+
+ return 0;
+}
+
+static struct platform_driver cpu0_cpufreq_platdrv = {
+ .driver = {
+ .name = "cpufreq-cpu0",
+ .owner = THIS_MODULE,
+ },
+ .probe = cpu0_cpufreq_probe,
+ .remove = cpu0_cpufreq_remove,
+};
+module_platform_driver(cpu0_cpufreq_platdrv);
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1f93dbd..b02824d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -59,8 +59,6 @@
* mode before doing so.
*
* Additional rules:
- * - All holders of the lock should check to make sure that the CPU they
- * are concerned with are online after they get the lock.
* - Governor routines that can be called in cpufreq hotplug path should not
* take this sem as top level hotplug notifier handler takes this.
* - Lock should not be held across
@@ -70,38 +68,28 @@
static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
#define lock_policy_rwsem(mode, cpu) \
-static int lock_policy_rwsem_##mode \
-(int cpu) \
+static int lock_policy_rwsem_##mode(int cpu) \
{ \
int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu); \
BUG_ON(policy_cpu == -1); \
down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
- if (unlikely(!cpu_online(cpu))) { \
- up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
- return -1; \
- } \
\
return 0; \
}
lock_policy_rwsem(read, cpu);
-
lock_policy_rwsem(write, cpu);
-static void unlock_policy_rwsem_read(int cpu)
-{
- int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu);
- BUG_ON(policy_cpu == -1);
- up_read(&per_cpu(cpu_policy_rwsem, policy_cpu));
+#define unlock_policy_rwsem(mode, cpu) \
+static void unlock_policy_rwsem_##mode(int cpu) \
+{ \
+ int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu); \
+ BUG_ON(policy_cpu == -1); \
+ up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
}
-static void unlock_policy_rwsem_write(int cpu)
-{
- int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu);
- BUG_ON(policy_cpu == -1);
- up_write(&per_cpu(cpu_policy_rwsem, policy_cpu));
-}
-
+unlock_policy_rwsem(read, cpu);
+unlock_policy_rwsem(write, cpu);
/* internal prototypes */
static int __cpufreq_governor(struct cpufreq_policy *policy,
@@ -180,6 +168,9 @@
struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
{
+ if (cpufreq_disabled())
+ return NULL;
+
return __cpufreq_cpu_get(cpu, false);
}
EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
@@ -198,6 +189,9 @@
void cpufreq_cpu_put(struct cpufreq_policy *data)
{
+ if (cpufreq_disabled())
+ return;
+
__cpufreq_cpu_put(data, false);
}
EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
@@ -261,14 +255,21 @@
void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
{
struct cpufreq_policy *policy;
+ unsigned long flags;
BUG_ON(irqs_disabled());
+ if (cpufreq_disabled())
+ return;
+
freqs->flags = cpufreq_driver->flags;
pr_debug("notification %u of frequency transition to %u kHz\n",
state, freqs->new);
+ spin_lock_irqsave(&cpufreq_driver_lock, flags);
policy = per_cpu(cpufreq_cpu_data, freqs->cpu);
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
switch (state) {
case CPUFREQ_PRECHANGE:
@@ -294,7 +295,6 @@
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
(unsigned long)freqs->cpu);
- trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
trace_cpu_frequency(freqs->new, freqs->cpu);
srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
CPUFREQ_POSTCHANGE, freqs);
@@ -543,8 +543,6 @@
*/
static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf)
{
- if (cpumask_empty(policy->related_cpus))
- return show_cpus(policy->cpus, buf);
return show_cpus(policy->related_cpus, buf);
}
@@ -700,87 +698,6 @@
.release = cpufreq_sysfs_release,
};
-/*
- * Returns:
- * Negative: Failure
- * 0: Success
- * Positive: When we have a managed CPU and the sysfs got symlinked
- */
-static int cpufreq_add_dev_policy(unsigned int cpu,
- struct cpufreq_policy *policy,
- struct device *dev)
-{
- int ret = 0;
-#ifdef CONFIG_SMP
- unsigned long flags;
- unsigned int j;
-#ifdef CONFIG_HOTPLUG_CPU
- struct cpufreq_governor *gov;
-
- gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
- if (gov) {
- policy->governor = gov;
- pr_debug("Restoring governor %s for cpu %d\n",
- policy->governor->name, cpu);
- }
-#endif
-
- for_each_cpu(j, policy->cpus) {
- struct cpufreq_policy *managed_policy;
-
- if (cpu == j)
- continue;
-
- /* Check for existing affected CPUs.
- * They may not be aware of it due to CPU Hotplug.
- * cpufreq_cpu_put is called when the device is removed
- * in __cpufreq_remove_dev()
- */
- managed_policy = cpufreq_cpu_get(j);
- if (unlikely(managed_policy)) {
-
- /* Set proper policy_cpu */
- unlock_policy_rwsem_write(cpu);
- per_cpu(cpufreq_policy_cpu, cpu) = managed_policy->cpu;
-
- if (lock_policy_rwsem_write(cpu) < 0) {
- /* Should not go through policy unlock path */
- if (cpufreq_driver->exit)
- cpufreq_driver->exit(policy);
- cpufreq_cpu_put(managed_policy);
- return -EBUSY;
- }
-
- spin_lock_irqsave(&cpufreq_driver_lock, flags);
- cpumask_copy(managed_policy->cpus, policy->cpus);
- per_cpu(cpufreq_cpu_data, cpu) = managed_policy;
- spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
-
- pr_debug("CPU already managed, adding link\n");
- ret = sysfs_create_link(&dev->kobj,
- &managed_policy->kobj,
- "cpufreq");
- if (ret)
- cpufreq_cpu_put(managed_policy);
- /*
- * Success. We only needed to be added to the mask.
- * Call driver->exit() because only the cpu parent of
- * the kobj needed to call init().
- */
- if (cpufreq_driver->exit)
- cpufreq_driver->exit(policy);
-
- if (!ret)
- return 1;
- else
- return ret;
- }
- }
-#endif
- return ret;
-}
-
-
/* symlink affected CPUs */
static int cpufreq_add_dev_symlink(unsigned int cpu,
struct cpufreq_policy *policy)
@@ -794,8 +711,6 @@
if (j == cpu)
continue;
- if (!cpu_online(j))
- continue;
pr_debug("CPU %u already managed, adding link\n", j);
managed_policy = cpufreq_cpu_get(cpu);
@@ -852,8 +767,6 @@
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus) {
- if (!cpu_online(j))
- continue;
per_cpu(cpufreq_cpu_data, j) = policy;
per_cpu(cpufreq_policy_cpu, j) = policy->cpu;
}
@@ -885,6 +798,42 @@
return ret;
}
+#ifdef CONFIG_HOTPLUG_CPU
+static int cpufreq_add_policy_cpu(unsigned int cpu, unsigned int sibling,
+ struct device *dev)
+{
+ struct cpufreq_policy *policy;
+ int ret = 0;
+ unsigned long flags;
+
+ policy = cpufreq_cpu_get(sibling);
+ WARN_ON(!policy);
+
+ __cpufreq_governor(policy, CPUFREQ_GOV_STOP);
+
+ lock_policy_rwsem_write(sibling);
+
+ spin_lock_irqsave(&cpufreq_driver_lock, flags);
+
+ cpumask_set_cpu(cpu, policy->cpus);
+ per_cpu(cpufreq_policy_cpu, cpu) = policy->cpu;
+ per_cpu(cpufreq_cpu_data, cpu) = policy;
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+ unlock_policy_rwsem_write(sibling);
+
+ __cpufreq_governor(policy, CPUFREQ_GOV_START);
+ __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
+
+ ret = sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq");
+ if (ret) {
+ cpufreq_cpu_put(policy);
+ return ret;
+ }
+
+ return 0;
+}
+#endif
/**
* cpufreq_add_dev - add a CPU device
@@ -897,12 +846,12 @@
*/
static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
{
- unsigned int cpu = dev->id;
- int ret = 0, found = 0;
+ unsigned int j, cpu = dev->id;
+ int ret = -ENOMEM;
struct cpufreq_policy *policy;
unsigned long flags;
- unsigned int j;
#ifdef CONFIG_HOTPLUG_CPU
+ struct cpufreq_governor *gov;
int sibling;
#endif
@@ -919,6 +868,19 @@
cpufreq_cpu_put(policy);
return 0;
}
+
+#ifdef CONFIG_HOTPLUG_CPU
+ /* Check if this cpu was hot-unplugged earlier and has siblings */
+ spin_lock_irqsave(&cpufreq_driver_lock, flags);
+ for_each_online_cpu(sibling) {
+ struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling);
+ if (cp && cpumask_test_cpu(cpu, cp->related_cpus)) {
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+ return cpufreq_add_policy_cpu(cpu, sibling, dev);
+ }
+ }
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+#endif
#endif
if (!try_module_get(cpufreq_driver->owner)) {
@@ -926,7 +888,6 @@
goto module_out;
}
- ret = -ENOMEM;
policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL);
if (!policy)
goto nomem_out;
@@ -938,66 +899,58 @@
goto err_free_cpumask;
policy->cpu = cpu;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
cpumask_copy(policy->cpus, cpumask_of(cpu));
/* Initially set CPU itself as the policy_cpu */
per_cpu(cpufreq_policy_cpu, cpu) = cpu;
- ret = (lock_policy_rwsem_write(cpu) < 0);
- WARN_ON(ret);
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update);
- /* Set governor before ->init, so that driver could check it */
-#ifdef CONFIG_HOTPLUG_CPU
- for_each_online_cpu(sibling) {
- struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling);
- if (cp && cp->governor &&
- (cpumask_test_cpu(cpu, cp->related_cpus))) {
- policy->governor = cp->governor;
- found = 1;
- break;
- }
- }
-#endif
- if (!found)
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
/* call driver. From then on the cpufreq must be able
* to accept all calls to ->verify and ->setpolicy for this CPU
*/
ret = cpufreq_driver->init(policy);
if (ret) {
pr_debug("initialization failed\n");
- goto err_unlock_policy;
+ goto err_set_policy_cpu;
}
+
+ /* related cpus should atleast have policy->cpus */
+ cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
+
+ /*
+ * affected cpus must always be the one, which are online. We aren't
+ * managing offline cpus here.
+ */
+ cpumask_and(policy->cpus, policy->cpus, cpu_online_mask);
+
policy->user_policy.min = policy->min;
policy->user_policy.max = policy->max;
blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
CPUFREQ_START, policy);
- ret = cpufreq_add_dev_policy(cpu, policy, dev);
- if (ret) {
- if (ret > 0)
- /* This is a managed cpu, symlink created,
- exit with 0 */
- ret = 0;
- goto err_unlock_policy;
+#ifdef CONFIG_HOTPLUG_CPU
+ gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
+ if (gov) {
+ policy->governor = gov;
+ pr_debug("Restoring governor %s for cpu %d\n",
+ policy->governor->name, cpu);
}
+#endif
ret = cpufreq_add_dev_interface(cpu, policy, dev);
if (ret)
goto err_out_unregister;
- unlock_policy_rwsem_write(cpu);
-
kobject_uevent(&policy->kobj, KOBJ_ADD);
module_put(cpufreq_driver->owner);
pr_debug("initialization complete\n");
return 0;
-
err_out_unregister:
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus)
@@ -1007,8 +960,8 @@
kobject_put(&policy->kobj);
wait_for_completion(&policy->kobj_unregister);
-err_unlock_policy:
- unlock_policy_rwsem_write(cpu);
+err_set_policy_cpu:
+ per_cpu(cpufreq_policy_cpu, cpu) = -1;
free_cpumask_var(policy->related_cpus);
err_free_cpumask:
free_cpumask_var(policy->cpus);
@@ -1020,6 +973,22 @@
return ret;
}
+static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu)
+{
+ int j;
+
+ policy->last_cpu = policy->cpu;
+ policy->cpu = cpu;
+
+ for_each_cpu(j, policy->cpus)
+ per_cpu(cpufreq_policy_cpu, j) = cpu;
+
+#ifdef CONFIG_CPU_FREQ_TABLE
+ cpufreq_frequency_table_update_policy_cpu(policy);
+#endif
+ blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+ CPUFREQ_UPDATE_POLICY_CPU, policy);
+}
/**
* __cpufreq_remove_dev - remove a CPU device
@@ -1030,129 +999,103 @@
*/
static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
{
- unsigned int cpu = dev->id;
+ unsigned int cpu = dev->id, ret, cpus;
unsigned long flags;
struct cpufreq_policy *data;
struct kobject *kobj;
struct completion *cmp;
-#ifdef CONFIG_SMP
struct device *cpu_dev;
- unsigned int j;
-#endif
- pr_debug("unregistering CPU %u\n", cpu);
+ pr_debug("%s: unregistering CPU %u\n", __func__, cpu);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
- data = per_cpu(cpufreq_cpu_data, cpu);
- if (!data) {
- spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- unlock_policy_rwsem_write(cpu);
- return -EINVAL;
- }
+ data = per_cpu(cpufreq_cpu_data, cpu);
per_cpu(cpufreq_cpu_data, cpu) = NULL;
-
-#ifdef CONFIG_SMP
- /* if this isn't the CPU which is the parent of the kobj, we
- * only need to unlink, put and exit
- */
- if (unlikely(cpu != data->cpu)) {
- pr_debug("removing link\n");
- cpumask_clear_cpu(cpu, data->cpus);
- spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- kobj = &dev->kobj;
- cpufreq_cpu_put(data);
- unlock_policy_rwsem_write(cpu);
- sysfs_remove_link(kobj, "cpufreq");
- return 0;
- }
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef CONFIG_HOTPLUG_CPU
- strncpy(per_cpu(cpufreq_cpu_governor, cpu), data->governor->name,
- CPUFREQ_NAME_LEN);
-#endif
-
- /* if we have other CPUs still registered, we need to unlink them,
- * or else wait_for_completion below will lock up. Clean the
- * per_cpu(cpufreq_cpu_data) while holding the lock, and remove
- * the sysfs links afterwards.
- */
- if (unlikely(cpumask_weight(data->cpus) > 1)) {
- for_each_cpu(j, data->cpus) {
- if (j == cpu)
- continue;
- per_cpu(cpufreq_cpu_data, j) = NULL;
- }
- }
-
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- if (unlikely(cpumask_weight(data->cpus) > 1)) {
- for_each_cpu(j, data->cpus) {
- if (j == cpu)
- continue;
- pr_debug("removing link for cpu %u\n", j);
-#ifdef CONFIG_HOTPLUG_CPU
- strncpy(per_cpu(cpufreq_cpu_governor, j),
- data->governor->name, CPUFREQ_NAME_LEN);
-#endif
- cpu_dev = get_cpu_device(j);
- kobj = &cpu_dev->kobj;
- unlock_policy_rwsem_write(cpu);
- sysfs_remove_link(kobj, "cpufreq");
- lock_policy_rwsem_write(cpu);
- cpufreq_cpu_put(data);
- }
+ if (!data) {
+ pr_debug("%s: No cpu_data found\n", __func__);
+ return -EINVAL;
}
-#else
- spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
-#endif
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- kobj = &data->kobj;
- cmp = &data->kobj_unregister;
- unlock_policy_rwsem_write(cpu);
- kobject_put(kobj);
-
- /* we need to make sure that the underlying kobj is actually
- * not referenced anymore by anybody before we proceed with
- * unloading.
- */
- pr_debug("waiting for dropping of refcount\n");
- wait_for_completion(cmp);
- pr_debug("wait complete\n");
-
- lock_policy_rwsem_write(cpu);
- if (cpufreq_driver->exit)
- cpufreq_driver->exit(data);
- unlock_policy_rwsem_write(cpu);
-
#ifdef CONFIG_HOTPLUG_CPU
- /* when the CPU which is the parent of the kobj is hotplugged
- * offline, check for siblings, and create cpufreq sysfs interface
- * and symlinks
- */
- if (unlikely(cpumask_weight(data->cpus) > 1)) {
- /* first sibling now owns the new sysfs dir */
- cpumask_clear_cpu(cpu, data->cpus);
- cpufreq_add_dev(get_cpu_device(cpumask_first(data->cpus)), NULL);
-
- /* finally remove our own symlink */
- lock_policy_rwsem_write(cpu);
- __cpufreq_remove_dev(dev, sif);
- }
+ if (!cpufreq_driver->setpolicy)
+ strncpy(per_cpu(cpufreq_cpu_governor, cpu),
+ data->governor->name, CPUFREQ_NAME_LEN);
#endif
- free_cpumask_var(data->related_cpus);
- free_cpumask_var(data->cpus);
- kfree(data);
+ WARN_ON(lock_policy_rwsem_write(cpu));
+ cpus = cpumask_weight(data->cpus);
+ cpumask_clear_cpu(cpu, data->cpus);
+ unlock_policy_rwsem_write(cpu);
+ if (cpu != data->cpu) {
+ sysfs_remove_link(&dev->kobj, "cpufreq");
+ } else if (cpus > 1) {
+ /* first sibling now owns the new sysfs dir */
+ cpu_dev = get_cpu_device(cpumask_first(data->cpus));
+ sysfs_remove_link(&cpu_dev->kobj, "cpufreq");
+ ret = kobject_move(&data->kobj, &cpu_dev->kobj);
+ if (ret) {
+ pr_err("%s: Failed to move kobj: %d", __func__, ret);
+
+ WARN_ON(lock_policy_rwsem_write(cpu));
+ cpumask_set_cpu(cpu, data->cpus);
+
+ spin_lock_irqsave(&cpufreq_driver_lock, flags);
+ per_cpu(cpufreq_cpu_data, cpu) = data;
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+ unlock_policy_rwsem_write(cpu);
+
+ ret = sysfs_create_link(&cpu_dev->kobj, &data->kobj,
+ "cpufreq");
+ return -EINVAL;
+ }
+
+ WARN_ON(lock_policy_rwsem_write(cpu));
+ update_policy_cpu(data, cpu_dev->id);
+ unlock_policy_rwsem_write(cpu);
+ pr_debug("%s: policy Kobject moved to cpu: %d from: %d\n",
+ __func__, cpu_dev->id, cpu);
+ }
+
+ pr_debug("%s: removing link, cpu: %d\n", __func__, cpu);
+ cpufreq_cpu_put(data);
+
+ /* If cpu is last user of policy, free policy */
+ if (cpus == 1) {
+ lock_policy_rwsem_read(cpu);
+ kobj = &data->kobj;
+ cmp = &data->kobj_unregister;
+ unlock_policy_rwsem_read(cpu);
+ kobject_put(kobj);
+
+ /* we need to make sure that the underlying kobj is actually
+ * not referenced anymore by anybody before we proceed with
+ * unloading.
+ */
+ pr_debug("waiting for dropping of refcount\n");
+ wait_for_completion(cmp);
+ pr_debug("wait complete\n");
+
+ if (cpufreq_driver->exit)
+ cpufreq_driver->exit(data);
+
+ free_cpumask_var(data->related_cpus);
+ free_cpumask_var(data->cpus);
+ kfree(data);
+ } else if (cpufreq_driver->target) {
+ __cpufreq_governor(data, CPUFREQ_GOV_START);
+ __cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
+ }
+
+ per_cpu(cpufreq_policy_cpu, cpu) = -1;
return 0;
}
@@ -1165,9 +1108,6 @@
if (cpu_is_offline(cpu))
return 0;
- if (unlikely(lock_policy_rwsem_write(cpu)))
- BUG();
-
retval = __cpufreq_remove_dev(dev, sif);
return retval;
}
@@ -1216,9 +1156,13 @@
*/
unsigned int cpufreq_quick_get(unsigned int cpu)
{
- struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ struct cpufreq_policy *policy;
unsigned int ret_freq = 0;
+ if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get)
+ return cpufreq_driver->get(cpu);
+
+ policy = cpufreq_cpu_get(cpu);
if (policy) {
ret_freq = policy->cur;
cpufreq_cpu_put(policy);
@@ -1386,6 +1330,20 @@
.resume = cpufreq_bp_resume,
};
+/**
+ * cpufreq_get_current_driver - return current driver's name
+ *
+ * Return the name string of the currently loaded cpufreq driver
+ * or NULL, if none.
+ */
+const char *cpufreq_get_current_driver(void)
+{
+ if (cpufreq_driver)
+ return cpufreq_driver->name;
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_current_driver);
/*********************************************************************
* NOTIFIER LISTS INTERFACE *
@@ -1408,6 +1366,9 @@
{
int ret;
+ if (cpufreq_disabled())
+ return -EINVAL;
+
WARN_ON(!init_cpufreq_transition_notifier_list_called);
switch (list) {
@@ -1442,6 +1403,9 @@
{
int ret;
+ if (cpufreq_disabled())
+ return -EINVAL;
+
switch (list) {
case CPUFREQ_TRANSITION_NOTIFIER:
ret = srcu_notifier_chain_unregister(
@@ -1487,7 +1451,7 @@
if (target_freq == policy->cur)
return 0;
- if (cpu_online(policy->cpu) && cpufreq_driver->target)
+ if (cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
return retval;
@@ -1522,7 +1486,10 @@
{
int ret = 0;
- if (!(cpu_online(cpu) && cpufreq_driver->getavg))
+ if (cpufreq_disabled())
+ return ret;
+
+ if (!cpufreq_driver->getavg)
return 0;
policy = cpufreq_cpu_get(policy->cpu);
@@ -1577,6 +1544,11 @@
policy->cpu, event);
ret = policy->governor->governor(policy, event);
+ if (event == CPUFREQ_GOV_START)
+ policy->governor->initialized++;
+ else if (event == CPUFREQ_GOV_STOP)
+ policy->governor->initialized--;
+
/* we keep one module reference alive for
each CPU governed by this CPU */
if ((event != CPUFREQ_GOV_START) || ret)
@@ -1600,6 +1572,7 @@
mutex_lock(&cpufreq_governor_mutex);
+ governor->initialized = 0;
err = -EBUSY;
if (__find_governor(governor->name) == NULL) {
err = 0;
@@ -1797,7 +1770,7 @@
pr_debug("Driver did not initialize current freq");
data->cur = policy.cur;
} else {
- if (data->cur != policy.cur)
+ if (data->cur != policy.cur && cpufreq_driver->target)
cpufreq_out_of_sync(cpu, data->cur,
policy.cur);
}
@@ -1829,9 +1802,6 @@
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
- if (unlikely(lock_policy_rwsem_write(cpu)))
- BUG();
-
__cpufreq_remove_dev(dev, NULL);
break;
case CPU_DOWN_FAILED:
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 64ef737..4fd0006 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -25,7 +25,7 @@
#include "cpufreq_governor.h"
-/* Conservative governor macors */
+/* Conservative governor macros */
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
#define DEF_SAMPLING_DOWN_FACTOR (1)
@@ -113,17 +113,20 @@
static void cs_dbs_timer(struct work_struct *work)
{
+ struct delayed_work *dw = to_delayed_work(work);
struct cs_cpu_dbs_info_s *dbs_info = container_of(work,
struct cs_cpu_dbs_info_s, cdbs.work.work);
- unsigned int cpu = dbs_info->cdbs.cpu;
+ unsigned int cpu = dbs_info->cdbs.cur_policy->cpu;
+ struct cs_cpu_dbs_info_s *core_dbs_info = &per_cpu(cs_cpu_dbs_info,
+ cpu);
int delay = delay_for_sampling_rate(cs_tuners.sampling_rate);
- mutex_lock(&dbs_info->cdbs.timer_mutex);
+ mutex_lock(&core_dbs_info->cdbs.timer_mutex);
+ if (need_load_eval(&core_dbs_info->cdbs, cs_tuners.sampling_rate))
+ dbs_check_cpu(&cs_dbs_data, cpu);
- dbs_check_cpu(&cs_dbs_data, cpu);
-
- schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
- mutex_unlock(&dbs_info->cdbs.timer_mutex);
+ schedule_delayed_work_on(smp_processor_id(), dw, delay);
+ mutex_unlock(&core_dbs_info->cdbs.timer_mutex);
}
static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
@@ -141,7 +144,7 @@
/*
* we only care if our internally tracked freq moves outside the 'valid'
- * ranges of freqency available to us otherwise we do not change it
+ * ranges of frequency available to us otherwise we do not change it
*/
if (dbs_info->requested_freq > policy->max
|| dbs_info->requested_freq < policy->min)
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 6c5f1d3..5a76086 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -161,25 +161,48 @@
}
EXPORT_SYMBOL_GPL(dbs_check_cpu);
-static inline void dbs_timer_init(struct dbs_data *dbs_data,
- struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+static inline void dbs_timer_init(struct dbs_data *dbs_data, int cpu,
+ unsigned int sampling_rate)
{
int delay = delay_for_sampling_rate(sampling_rate);
+ struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
- INIT_DEFERRABLE_WORK(&cdbs->work, dbs_data->gov_dbs_timer);
- schedule_delayed_work_on(cdbs->cpu, &cdbs->work, delay);
+ schedule_delayed_work_on(cpu, &cdbs->work, delay);
}
-static inline void dbs_timer_exit(struct cpu_dbs_common_info *cdbs)
+static inline void dbs_timer_exit(struct dbs_data *dbs_data, int cpu)
{
+ struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
+
cancel_delayed_work_sync(&cdbs->work);
}
+/* Will return if we need to evaluate cpu load again or not */
+bool need_load_eval(struct cpu_dbs_common_info *cdbs,
+ unsigned int sampling_rate)
+{
+ if (policy_is_shared(cdbs->cur_policy)) {
+ ktime_t time_now = ktime_get();
+ s64 delta_us = ktime_us_delta(time_now, cdbs->time_stamp);
+
+ /* Do nothing if we recently have sampled */
+ if (delta_us < (s64)(sampling_rate / 2))
+ return false;
+ else
+ cdbs->time_stamp = time_now;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(need_load_eval);
+
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event)
{
struct od_cpu_dbs_info_s *od_dbs_info = NULL;
struct cs_cpu_dbs_info_s *cs_dbs_info = NULL;
+ struct cs_ops *cs_ops = NULL;
+ struct od_ops *od_ops = NULL;
struct od_dbs_tuners *od_tuners = dbs_data->tuners;
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
struct cpu_dbs_common_info *cpu_cdbs;
@@ -192,109 +215,111 @@
cs_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
sampling_rate = &cs_tuners->sampling_rate;
ignore_nice = cs_tuners->ignore_nice;
+ cs_ops = dbs_data->gov_ops;
} else {
od_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
sampling_rate = &od_tuners->sampling_rate;
ignore_nice = od_tuners->ignore_nice;
+ od_ops = dbs_data->gov_ops;
}
switch (event) {
case CPUFREQ_GOV_START:
- if ((!cpu_online(cpu)) || (!policy->cur))
+ if (!policy->cur)
return -EINVAL;
mutex_lock(&dbs_data->mutex);
- dbs_data->enable++;
- cpu_cdbs->cpu = cpu;
for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_common_info *j_cdbs;
- j_cdbs = dbs_data->get_cpu_cdbs(j);
+ struct cpu_dbs_common_info *j_cdbs =
+ dbs_data->get_cpu_cdbs(j);
+ j_cdbs->cpu = j;
j_cdbs->cur_policy = policy;
j_cdbs->prev_cpu_idle = get_cpu_idle_time(j,
&j_cdbs->prev_cpu_wall);
if (ignore_nice)
j_cdbs->prev_cpu_nice =
kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+
+ mutex_init(&j_cdbs->timer_mutex);
+ INIT_DEFERRABLE_WORK(&j_cdbs->work,
+ dbs_data->gov_dbs_timer);
}
- /*
- * Start the timerschedule work, when this governor is used for
- * first time
- */
- if (dbs_data->enable != 1)
- goto second_time;
-
- rc = sysfs_create_group(cpufreq_global_kobject,
- dbs_data->attr_group);
- if (rc) {
- mutex_unlock(&dbs_data->mutex);
- return rc;
+ if (!policy->governor->initialized) {
+ rc = sysfs_create_group(cpufreq_global_kobject,
+ dbs_data->attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_data->mutex);
+ return rc;
+ }
}
- /* policy latency is in nS. Convert it to uS first */
- latency = policy->cpuinfo.transition_latency / 1000;
- if (latency == 0)
- latency = 1;
-
/*
* conservative does not implement micro like ondemand
* governor, thus we are bound to jiffes/HZ
*/
if (dbs_data->governor == GOV_CONSERVATIVE) {
- struct cs_ops *ops = dbs_data->gov_ops;
+ cs_dbs_info->down_skip = 0;
+ cs_dbs_info->enable = 1;
+ cs_dbs_info->requested_freq = policy->cur;
- cpufreq_register_notifier(ops->notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
+ if (!policy->governor->initialized) {
+ cpufreq_register_notifier(cs_ops->notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
- dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
- jiffies_to_usecs(10);
+ dbs_data->min_sampling_rate =
+ MIN_SAMPLING_RATE_RATIO *
+ jiffies_to_usecs(10);
+ }
} else {
- struct od_ops *ops = dbs_data->gov_ops;
+ od_dbs_info->rate_mult = 1;
+ od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ od_ops->powersave_bias_init_cpu(cpu);
- od_tuners->io_is_busy = ops->io_busy();
+ if (!policy->governor->initialized)
+ od_tuners->io_is_busy = od_ops->io_busy();
}
+ if (policy->governor->initialized)
+ goto unlock;
+
+ /* policy latency is in nS. Convert it to uS first */
+ latency = policy->cpuinfo.transition_latency / 1000;
+ if (latency == 0)
+ latency = 1;
+
/* Bring kernel and HW constraints together */
dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
MIN_LATENCY_MULTIPLIER * latency);
*sampling_rate = max(dbs_data->min_sampling_rate, latency *
LATENCY_MULTIPLIER);
-
-second_time:
- if (dbs_data->governor == GOV_CONSERVATIVE) {
- cs_dbs_info->down_skip = 0;
- cs_dbs_info->enable = 1;
- cs_dbs_info->requested_freq = policy->cur;
- } else {
- struct od_ops *ops = dbs_data->gov_ops;
- od_dbs_info->rate_mult = 1;
- od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
- ops->powersave_bias_init_cpu(cpu);
- }
+unlock:
mutex_unlock(&dbs_data->mutex);
- mutex_init(&cpu_cdbs->timer_mutex);
- dbs_timer_init(dbs_data, cpu_cdbs, *sampling_rate);
+ /* Initiate timer time stamp */
+ cpu_cdbs->time_stamp = ktime_get();
+
+ for_each_cpu(j, policy->cpus)
+ dbs_timer_init(dbs_data, j, *sampling_rate);
break;
case CPUFREQ_GOV_STOP:
if (dbs_data->governor == GOV_CONSERVATIVE)
cs_dbs_info->enable = 0;
- dbs_timer_exit(cpu_cdbs);
+ for_each_cpu(j, policy->cpus)
+ dbs_timer_exit(dbs_data, j);
mutex_lock(&dbs_data->mutex);
mutex_destroy(&cpu_cdbs->timer_mutex);
- dbs_data->enable--;
- if (!dbs_data->enable) {
- struct cs_ops *ops = dbs_data->gov_ops;
+ if (policy->governor->initialized == 1) {
sysfs_remove_group(cpufreq_global_kobject,
dbs_data->attr_group);
if (dbs_data->governor == GOV_CONSERVATIVE)
- cpufreq_unregister_notifier(ops->notifier_block,
+ cpufreq_unregister_notifier(cs_ops->notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
}
mutex_unlock(&dbs_data->mutex);
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index f661654..d2ac911 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -82,6 +82,7 @@
* the governor or limits.
*/
struct mutex timer_mutex;
+ ktime_t time_stamp;
};
struct od_cpu_dbs_info_s {
@@ -108,7 +109,7 @@
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
- unsigned int down_differential;
+ unsigned int adj_up_threshold;
unsigned int powersave_bias;
unsigned int io_is_busy;
};
@@ -129,7 +130,6 @@
#define GOV_CONSERVATIVE 1
int governor;
unsigned int min_sampling_rate;
- unsigned int enable; /* number of CPUs using this policy */
struct attribute_group *attr_group;
void *tuners;
@@ -171,6 +171,8 @@
u64 get_cpu_idle_time(unsigned int cpu, u64 *wall);
void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
+bool need_load_eval(struct cpu_dbs_common_info *cdbs,
+ unsigned int sampling_rate);
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event);
#endif /* _CPUFREQ_GOVERNER_H */
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 7731f7c..f3eb26c 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -26,7 +26,7 @@
#include "cpufreq_governor.h"
-/* On-demand governor macors */
+/* On-demand governor macros */
#define DEF_FREQUENCY_DOWN_DIFFERENTIAL (10)
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_SAMPLING_DOWN_FACTOR (1)
@@ -47,7 +47,8 @@
static struct od_dbs_tuners od_tuners = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
- .down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
+ .adj_up_threshold = DEF_FREQUENCY_UP_THRESHOLD -
+ DEF_FREQUENCY_DOWN_DIFFERENTIAL,
.ignore_nice = 0,
.powersave_bias = 0,
};
@@ -65,7 +66,7 @@
* efficient idling at a higher frequency/voltage is.
* Pavel Machek says this is not so for various generations of AMD and old
* Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Mike Chan (android.com) claims this is also not true for ARM.
* Because of this, whitelist specific known (series) of CPUs by default, and
* leave all others up to the user.
*/
@@ -73,7 +74,7 @@
{
#if defined(CONFIG_X86)
/*
- * For Intel, Core 2 (model 15) andl later have an efficient idle.
+ * For Intel, Core 2 (model 15) and later have an efficient idle.
*/
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 6 &&
@@ -158,8 +159,8 @@
/*
* Every sampling_rate, we check, if current idle time is less than 20%
- * (default), then we try to increase frequency Every sampling_rate, we look for
- * a the lowest frequency which can sustain the load while keeping idle time
+ * (default), then we try to increase frequency. Every sampling_rate, we look
+ * for the lowest frequency which can sustain the load while keeping idle time
* over 30%. If such a frequency exist, we try to decrease to this frequency.
*
* Any frequency increase takes it to the maximum frequency. Frequency reduction
@@ -192,11 +193,9 @@
* support the current CPU usage without triggering the up policy. To be
* safe, we focus 10 points under the threshold.
*/
- if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
- policy->cur) {
+ if (load_freq < od_tuners.adj_up_threshold * policy->cur) {
unsigned int freq_next;
- freq_next = load_freq / (od_tuners.up_threshold -
- od_tuners.down_differential);
+ freq_next = load_freq / od_tuners.adj_up_threshold;
/* No longer fully busy, reset rate_mult */
dbs_info->rate_mult = 1;
@@ -218,33 +217,42 @@
static void od_dbs_timer(struct work_struct *work)
{
+ struct delayed_work *dw = to_delayed_work(work);
struct od_cpu_dbs_info_s *dbs_info =
container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work);
- unsigned int cpu = dbs_info->cdbs.cpu;
- int delay, sample_type = dbs_info->sample_type;
+ unsigned int cpu = dbs_info->cdbs.cur_policy->cpu;
+ struct od_cpu_dbs_info_s *core_dbs_info = &per_cpu(od_cpu_dbs_info,
+ cpu);
+ int delay, sample_type = core_dbs_info->sample_type;
+ bool eval_load;
- mutex_lock(&dbs_info->cdbs.timer_mutex);
+ mutex_lock(&core_dbs_info->cdbs.timer_mutex);
+ eval_load = need_load_eval(&core_dbs_info->cdbs,
+ od_tuners.sampling_rate);
/* Common NORMAL_SAMPLE setup */
- dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ core_dbs_info->sample_type = OD_NORMAL_SAMPLE;
if (sample_type == OD_SUB_SAMPLE) {
- delay = dbs_info->freq_lo_jiffies;
- __cpufreq_driver_target(dbs_info->cdbs.cur_policy,
- dbs_info->freq_lo, CPUFREQ_RELATION_H);
+ delay = core_dbs_info->freq_lo_jiffies;
+ if (eval_load)
+ __cpufreq_driver_target(core_dbs_info->cdbs.cur_policy,
+ core_dbs_info->freq_lo,
+ CPUFREQ_RELATION_H);
} else {
- dbs_check_cpu(&od_dbs_data, cpu);
- if (dbs_info->freq_lo) {
+ if (eval_load)
+ dbs_check_cpu(&od_dbs_data, cpu);
+ if (core_dbs_info->freq_lo) {
/* Setup timer for SUB_SAMPLE */
- dbs_info->sample_type = OD_SUB_SAMPLE;
- delay = dbs_info->freq_hi_jiffies;
+ core_dbs_info->sample_type = OD_SUB_SAMPLE;
+ delay = core_dbs_info->freq_hi_jiffies;
} else {
delay = delay_for_sampling_rate(od_tuners.sampling_rate
- * dbs_info->rate_mult);
+ * core_dbs_info->rate_mult);
}
}
- schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
- mutex_unlock(&dbs_info->cdbs.timer_mutex);
+ schedule_delayed_work_on(smp_processor_id(), dw, delay);
+ mutex_unlock(&core_dbs_info->cdbs.timer_mutex);
}
/************************** sysfs interface ************************/
@@ -259,7 +267,7 @@
* update_sampling_rate - update sampling rate effective immediately if needed.
* @new_rate: new sampling rate
*
- * If new rate is smaller than the old, simply updaing
+ * If new rate is smaller than the old, simply updating
* dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
* original sampling_rate was 1 second and the requested new sampling rate is 10
* ms because the user needs immediate reaction from ondemand governor, but not
@@ -287,7 +295,7 @@
cpufreq_cpu_put(policy);
continue;
}
- dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
+ dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
cpufreq_cpu_put(policy);
mutex_lock(&dbs_info->cdbs.timer_mutex);
@@ -306,8 +314,7 @@
cancel_delayed_work_sync(&dbs_info->cdbs.work);
mutex_lock(&dbs_info->cdbs.timer_mutex);
- schedule_delayed_work_on(dbs_info->cdbs.cpu,
- &dbs_info->cdbs.work,
+ schedule_delayed_work_on(cpu, &dbs_info->cdbs.work,
usecs_to_jiffies(new_rate));
}
@@ -351,6 +358,10 @@
input < MIN_FREQUENCY_UP_THRESHOLD) {
return -EINVAL;
}
+ /* Calculate the new adj_up_threshold */
+ od_tuners.adj_up_threshold += input;
+ od_tuners.adj_up_threshold -= od_tuners.up_threshold;
+
od_tuners.up_threshold = input;
return count;
}
@@ -507,7 +518,8 @@
if (idle_time != -1ULL) {
/* Idle micro accounting is supported. Use finer thresholds */
od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
- od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+ od_tuners.adj_up_threshold = MICRO_FREQUENCY_UP_THRESHOLD -
+ MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
* In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 9d7732b..2fd779e 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -24,12 +24,6 @@
static spinlock_t cpufreq_stats_lock;
-#define CPUFREQ_STATDEVICE_ATTR(_name, _mode, _show) \
-static struct freq_attr _attr_##_name = {\
- .attr = {.name = __stringify(_name), .mode = _mode, }, \
- .show = _show,\
-};
-
struct cpufreq_stats {
unsigned int cpu;
unsigned int total_trans;
@@ -136,17 +130,17 @@
return PAGE_SIZE;
return len;
}
-CPUFREQ_STATDEVICE_ATTR(trans_table, 0444, show_trans_table);
+cpufreq_freq_attr_ro(trans_table);
#endif
-CPUFREQ_STATDEVICE_ATTR(total_trans, 0444, show_total_trans);
-CPUFREQ_STATDEVICE_ATTR(time_in_state, 0444, show_time_in_state);
+cpufreq_freq_attr_ro(total_trans);
+cpufreq_freq_attr_ro(time_in_state);
static struct attribute *default_attrs[] = {
- &_attr_total_trans.attr,
- &_attr_time_in_state.attr,
+ &total_trans.attr,
+ &time_in_state.attr,
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
- &_attr_trans_table.attr,
+ &trans_table.attr,
#endif
NULL
};
@@ -170,11 +164,13 @@
static void cpufreq_stats_free_table(unsigned int cpu)
{
struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
+
if (stat) {
+ pr_debug("%s: Free stat table\n", __func__);
kfree(stat->time_in_state);
kfree(stat);
+ per_cpu(cpufreq_stats_table, cpu) = NULL;
}
- per_cpu(cpufreq_stats_table, cpu) = NULL;
}
/* must be called early in the CPU removal sequence (before
@@ -183,8 +179,14 @@
static void cpufreq_stats_free_sysfs(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- if (policy && policy->cpu == cpu)
+
+ if (!cpufreq_frequency_get_table(cpu))
+ return;
+
+ if (policy && !policy_is_shared(policy)) {
+ pr_debug("%s: Free sysfs stat\n", __func__);
sysfs_remove_group(&policy->kobj, &stats_attr_group);
+ }
if (policy)
cpufreq_cpu_put(policy);
}
@@ -262,6 +264,19 @@
return ret;
}
+static void cpufreq_stats_update_policy_cpu(struct cpufreq_policy *policy)
+{
+ struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table,
+ policy->last_cpu);
+
+ pr_debug("Updating stats_table for new_cpu %u from last_cpu %u\n",
+ policy->cpu, policy->last_cpu);
+ per_cpu(cpufreq_stats_table, policy->cpu) = per_cpu(cpufreq_stats_table,
+ policy->last_cpu);
+ per_cpu(cpufreq_stats_table, policy->last_cpu) = NULL;
+ stat->cpu = policy->cpu;
+}
+
static int cpufreq_stat_notifier_policy(struct notifier_block *nb,
unsigned long val, void *data)
{
@@ -269,6 +284,12 @@
struct cpufreq_policy *policy = data;
struct cpufreq_frequency_table *table;
unsigned int cpu = policy->cpu;
+
+ if (val == CPUFREQ_UPDATE_POLICY_CPU) {
+ cpufreq_stats_update_policy_cpu(policy);
+ return 0;
+ }
+
if (val != CPUFREQ_NOTIFY)
return 0;
table = cpufreq_frequency_get_table(cpu);
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index c8c3d29..bbeb9c0 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -118,8 +118,6 @@
switch (event) {
case CPUFREQ_GOV_START:
- if (!cpu_online(cpu))
- return -EINVAL;
BUG_ON(!policy->cur);
mutex_lock(&userspace_mutex);
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 4f154bc..79a8486 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -128,9 +128,7 @@
policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
/* policy sharing between dual CPUs */
- cpumask_copy(policy->cpus, cpu_present_mask);
-
- policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+ cpumask_setall(policy->cpus);
return 0;
}
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 7012ea8..69b676d 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -42,51 +42,56 @@
return clk_get_rate(exynos_info->cpu_clk) / 1000;
}
-static int exynos_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+static int exynos_cpufreq_get_index(unsigned int freq)
{
- unsigned int index, old_index;
- unsigned int arm_volt, safe_arm_volt = 0;
- int ret = 0;
+ struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+ int index;
+
+ for (index = 0;
+ freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
+ if (freq_table[index].frequency == freq)
+ break;
+
+ if (freq_table[index].frequency == CPUFREQ_TABLE_END)
+ return -EINVAL;
+
+ return index;
+}
+
+static int exynos_cpufreq_scale(unsigned int target_freq)
+{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
unsigned int *volt_table = exynos_info->volt_table;
+ struct cpufreq_policy *policy = cpufreq_cpu_get(0);
+ unsigned int arm_volt, safe_arm_volt = 0;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
-
- mutex_lock(&cpufreq_lock);
+ int index, old_index;
+ int ret = 0;
freqs.old = policy->cur;
+ freqs.new = target_freq;
+ freqs.cpu = policy->cpu;
- if (frequency_locked && target_freq != locking_frequency) {
- ret = -EAGAIN;
+ if (freqs.new == freqs.old)
goto out;
- }
/*
* The policy max have been changed so that we cannot get proper
* old_index with cpufreq_frequency_table_target(). Thus, ignore
* policy and get the index from the raw freqeuncy table.
*/
- for (old_index = 0;
- freq_table[old_index].frequency != CPUFREQ_TABLE_END;
- old_index++)
- if (freq_table[old_index].frequency == freqs.old)
- break;
-
- if (freq_table[old_index].frequency == CPUFREQ_TABLE_END) {
- ret = -EINVAL;
+ old_index = exynos_cpufreq_get_index(freqs.old);
+ if (old_index < 0) {
+ ret = old_index;
goto out;
}
- if (cpufreq_frequency_table_target(policy, freq_table,
- target_freq, relation, &index)) {
- ret = -EINVAL;
+ index = exynos_cpufreq_get_index(target_freq);
+ if (index < 0) {
+ ret = index;
goto out;
}
- freqs.new = freq_table[index].frequency;
- freqs.cpu = policy->cpu;
-
/*
* ARM clock source will be changed APLL to MPLL temporary
* To support this level, need to control regulator for
@@ -106,15 +111,25 @@
/* When the new frequency is higher than current frequency */
if ((freqs.new > freqs.old) && !safe_arm_volt) {
/* Firstly, voltage up to increase frequency */
- regulator_set_voltage(arm_regulator, arm_volt,
- arm_volt);
+ ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
+ if (ret) {
+ pr_err("%s: failed to set cpu voltage to %d\n",
+ __func__, arm_volt);
+ goto out;
+ }
}
- if (safe_arm_volt)
- regulator_set_voltage(arm_regulator, safe_arm_volt,
+ if (safe_arm_volt) {
+ ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
safe_arm_volt);
- if (freqs.new != freqs.old)
- exynos_info->set_freq(old_index, index);
+ if (ret) {
+ pr_err("%s: failed to set cpu voltage to %d\n",
+ __func__, safe_arm_volt);
+ goto out;
+ }
+ }
+
+ exynos_info->set_freq(old_index, index);
for_each_cpu(freqs.cpu, policy->cpus)
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
@@ -125,9 +140,45 @@
/* down the voltage after frequency change */
regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
+ if (ret) {
+ pr_err("%s: failed to set cpu voltage to %d\n",
+ __func__, arm_volt);
+ goto out;
+ }
}
out:
+
+ cpufreq_cpu_put(policy);
+
+ return ret;
+}
+
+static int exynos_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+ unsigned int index;
+ unsigned int new_freq;
+ int ret = 0;
+
+ mutex_lock(&cpufreq_lock);
+
+ if (frequency_locked)
+ goto out;
+
+ if (cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &index)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ new_freq = freq_table[index].frequency;
+
+ ret = exynos_cpufreq_scale(new_freq);
+
+out:
mutex_unlock(&cpufreq_lock);
return ret;
@@ -163,51 +214,26 @@
static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event, void *v)
{
- struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
- static unsigned int saved_frequency;
- unsigned int temp;
+ int ret;
- mutex_lock(&cpufreq_lock);
switch (pm_event) {
case PM_SUSPEND_PREPARE:
- if (frequency_locked)
- goto out;
-
+ mutex_lock(&cpufreq_lock);
frequency_locked = true;
+ mutex_unlock(&cpufreq_lock);
- if (locking_frequency) {
- saved_frequency = exynos_getspeed(0);
+ ret = exynos_cpufreq_scale(locking_frequency);
+ if (ret < 0)
+ return NOTIFY_BAD;
- mutex_unlock(&cpufreq_lock);
- exynos_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
- }
break;
case PM_POST_SUSPEND:
- if (saved_frequency) {
- /*
- * While frequency_locked, only locking_frequency
- * is valid for target(). In order to use
- * saved_frequency while keeping frequency_locked,
- * we temporarly overwrite locking_frequency.
- */
- temp = locking_frequency;
- locking_frequency = saved_frequency;
-
- mutex_unlock(&cpufreq_lock);
- exynos_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
-
- locking_frequency = temp;
- }
+ mutex_lock(&cpufreq_lock);
frequency_locked = false;
+ mutex_unlock(&cpufreq_lock);
break;
}
-out:
- mutex_unlock(&cpufreq_lock);
return NOTIFY_OK;
}
@@ -222,35 +248,34 @@
cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
- locking_frequency = exynos_getspeed(0);
-
/* set the transition latency value */
policy->cpuinfo.transition_latency = 100000;
- /*
- * EXYNOS4 multi-core processors has 2 cores
- * that the frequency cannot be set independently.
- * Each cpu is bound to the same speed.
- * So the affected cpu is all of the cpus.
- */
- if (num_online_cpus() == 1) {
- cpumask_copy(policy->related_cpus, cpu_possible_mask);
- cpumask_copy(policy->cpus, cpu_online_mask);
- } else {
- policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
- cpumask_setall(policy->cpus);
- }
+ cpumask_setall(policy->cpus);
return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
}
+static int exynos_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *exynos_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY,
.verify = exynos_verify_speed,
.target = exynos_target,
.get = exynos_getspeed,
.init = exynos_cpufreq_cpu_init,
+ .exit = exynos_cpufreq_cpu_exit,
.name = "exynos_cpufreq",
+ .attr = exynos_cpufreq_attr,
#ifdef CONFIG_PM
.suspend = exynos_cpufreq_suspend,
.resume = exynos_cpufreq_resume,
@@ -288,6 +313,8 @@
goto err_vdd_arm;
}
+ locking_frequency = exynos_getspeed(0);
+
register_pm_notifier(&exynos_cpufreq_nb);
if (cpufreq_register_driver(&exynos_driver)) {
@@ -299,8 +326,7 @@
err_cpufreq:
unregister_pm_notifier(&exynos_cpufreq_nb);
- if (!IS_ERR(arm_regulator))
- regulator_put(arm_regulator);
+ regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
pr_debug("%s: failed initialization\n", __func__);
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index fb148fa..de91755 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -20,97 +20,37 @@
#include <mach/regs-clock.h>
#include <mach/cpufreq.h>
-#define CPUFREQ_LEVEL_END L5
-
-static int max_support_idx = L0;
-static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
-
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
-struct cpufreq_clkdiv {
- unsigned int index;
- unsigned int clkdiv;
-};
-
-static unsigned int exynos4210_volt_table[CPUFREQ_LEVEL_END] = {
+static unsigned int exynos4210_volt_table[] = {
1250000, 1150000, 1050000, 975000, 950000,
};
-
-static struct cpufreq_clkdiv exynos4210_clkdiv_table[CPUFREQ_LEVEL_END];
-
static struct cpufreq_frequency_table exynos4210_freq_table[] = {
- {L0, 1200*1000},
- {L1, 1000*1000},
- {L2, 800*1000},
- {L3, 500*1000},
- {L4, 200*1000},
+ {L0, 1200 * 1000},
+ {L1, 1000 * 1000},
+ {L2, 800 * 1000},
+ {L3, 500 * 1000},
+ {L4, 200 * 1000},
{0, CPUFREQ_TABLE_END},
};
-static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
+static struct apll_freq apll_freq_4210[] = {
/*
- * Clock divider value for following
- * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
- * DIVATB, DIVPCLK_DBG, DIVAPLL }
+ * values:
+ * freq
+ * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED
+ * clock divider for COPY, HPM, RESERVED
+ * PLL M, P, S
*/
-
- /* ARM L0: 1200MHz */
- { 0, 3, 7, 3, 4, 1, 7 },
-
- /* ARM L1: 1000MHz */
- { 0, 3, 7, 3, 4, 1, 7 },
-
- /* ARM L2: 800MHz */
- { 0, 3, 7, 3, 3, 1, 7 },
-
- /* ARM L3: 500MHz */
- { 0, 3, 7, 3, 3, 1, 7 },
-
- /* ARM L4: 200MHz */
- { 0, 1, 3, 1, 3, 1, 0 },
-};
-
-static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
- /*
- * Clock divider value for following
- * { DIVCOPY, DIVHPM }
- */
-
- /* ARM L0: 1200MHz */
- { 5, 0 },
-
- /* ARM L1: 1000MHz */
- { 4, 0 },
-
- /* ARM L2: 800MHz */
- { 3, 0 },
-
- /* ARM L3: 500MHz */
- { 3, 0 },
-
- /* ARM L4: 200MHz */
- { 3, 0 },
-};
-
-static unsigned int exynos4210_apll_pms_table[CPUFREQ_LEVEL_END] = {
- /* APLL FOUT L0: 1200MHz */
- ((150 << 16) | (3 << 8) | 1),
-
- /* APLL FOUT L1: 1000MHz */
- ((250 << 16) | (6 << 8) | 1),
-
- /* APLL FOUT L2: 800MHz */
- ((200 << 16) | (6 << 8) | 1),
-
- /* APLL FOUT L3: 500MHz */
- ((250 << 16) | (6 << 8) | 2),
-
- /* APLL FOUT L4: 200MHz */
- ((200 << 16) | (6 << 8) | 3),
+ APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
+ APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
+ APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
+ APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
+ APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
};
static void exynos4210_set_clkdiv(unsigned int div_index)
@@ -119,7 +59,7 @@
/* Change Divider - CPU0 */
- tmp = exynos4210_clkdiv_table[div_index].clkdiv;
+ tmp = apll_freq_4210[div_index].clk_div_cpu0;
__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
@@ -129,12 +69,7 @@
/* Change Divider - CPU1 */
- tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
-
- tmp &= ~((0x7 << 4) | 0x7);
-
- tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
- (clkdiv_cpu1[div_index][1] << 0));
+ tmp = apll_freq_4210[div_index].clk_div_cpu1;
__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
@@ -162,7 +97,7 @@
/* 3. Change PLL PMS values */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos4210_apll_pms_table[index];
+ tmp |= apll_freq_4210[index].mps;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 4. wait_lock_time */
@@ -179,10 +114,10 @@
} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}
-bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
+static bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
{
- unsigned int old_pm = (exynos4210_apll_pms_table[old_index] >> 8);
- unsigned int new_pm = (exynos4210_apll_pms_table[new_index] >> 8);
+ unsigned int old_pm = apll_freq_4210[old_index].mps >> 8;
+ unsigned int new_pm = apll_freq_4210[new_index].mps >> 8;
return (old_pm == new_pm) ? 0 : 1;
}
@@ -200,7 +135,7 @@
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_4210[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
} else {
/* Clock Configuration Procedure */
@@ -214,7 +149,7 @@
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_4210[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 2. Change the system clock divider values */
@@ -231,8 +166,6 @@
int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
{
- int i;
- unsigned int tmp;
unsigned long rate;
cpu_clk = clk_get(NULL, "armclk");
@@ -253,33 +186,9 @@
if (IS_ERR(mout_apll))
goto err_mout_apll;
- tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
-
- for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
- EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
- EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
- EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
- EXYNOS4_CLKDIV_CPU0_ATB_MASK |
- EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
- EXYNOS4_CLKDIV_CPU0_APLL_MASK);
-
- tmp |= ((clkdiv_cpu0[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
- (clkdiv_cpu0[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
- (clkdiv_cpu0[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
- (clkdiv_cpu0[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
- (clkdiv_cpu0[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
- (clkdiv_cpu0[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
- (clkdiv_cpu0[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
-
- exynos4210_clkdiv_table[i].clkdiv = tmp;
- }
-
info->mpll_freq_khz = rate;
- info->pm_lock_idx = L2;
+ /* 800Mhz */
info->pll_safe_idx = L2;
- info->max_support_idx = max_support_idx;
- info->min_support_idx = min_support_idx;
info->cpu_clk = cpu_clk;
info->volt_table = exynos4210_volt_table;
info->freq_table = exynos4210_freq_table;
@@ -289,14 +198,11 @@
return 0;
err_mout_apll:
- if (!IS_ERR(mout_mpll))
- clk_put(mout_mpll);
+ clk_put(mout_mpll);
err_mout_mpll:
- if (!IS_ERR(moutcore))
- clk_put(moutcore);
+ clk_put(moutcore);
err_moutcore:
- if (!IS_ERR(cpu_clk))
- clk_put(cpu_clk);
+ clk_put(cpu_clk);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 8c5a7af..0661039 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -20,26 +20,18 @@
#include <mach/regs-clock.h>
#include <mach/cpufreq.h>
-#define CPUFREQ_LEVEL_END (L13 + 1)
-
-static int max_support_idx;
-static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
-
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
-struct cpufreq_clkdiv {
- unsigned int index;
- unsigned int clkdiv;
- unsigned int clkdiv1;
+static unsigned int exynos4x12_volt_table[] = {
+ 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
+ 1000000, 987500, 975000, 950000, 925000, 900000, 900000
};
-static unsigned int exynos4x12_volt_table[CPUFREQ_LEVEL_END];
-
static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
- {L0, 1500 * 1000},
+ {L0, CPUFREQ_ENTRY_INVALID},
{L1, 1400 * 1000},
{L2, 1300 * 1000},
{L3, 1200 * 1000},
@@ -56,247 +48,54 @@
{0, CPUFREQ_TABLE_END},
};
-static struct cpufreq_clkdiv exynos4x12_clkdiv_table[CPUFREQ_LEVEL_END];
+static struct apll_freq *apll_freq_4x12;
-static unsigned int clkdiv_cpu0_4212[CPUFREQ_LEVEL_END][8] = {
+static struct apll_freq apll_freq_4212[] = {
/*
- * Clock divider value for following
- * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
- * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ * values:
+ * freq
+ * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
+ * clock divider for COPY, HPM, RESERVED
+ * PLL M, P, S
*/
- /* ARM L0: 1500 MHz */
- { 0, 3, 7, 0, 6, 1, 2, 0 },
-
- /* ARM L1: 1400 MHz */
- { 0, 3, 7, 0, 6, 1, 2, 0 },
-
- /* ARM L2: 1300 MHz */
- { 0, 3, 7, 0, 5, 1, 2, 0 },
-
- /* ARM L3: 1200 MHz */
- { 0, 3, 7, 0, 5, 1, 2, 0 },
-
- /* ARM L4: 1100 MHz */
- { 0, 3, 6, 0, 4, 1, 2, 0 },
-
- /* ARM L5: 1000 MHz */
- { 0, 2, 5, 0, 4, 1, 1, 0 },
-
- /* ARM L6: 900 MHz */
- { 0, 2, 5, 0, 3, 1, 1, 0 },
-
- /* ARM L7: 800 MHz */
- { 0, 2, 5, 0, 3, 1, 1, 0 },
-
- /* ARM L8: 700 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L9: 600 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L10: 500 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L11: 400 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L12: 300 MHz */
- { 0, 2, 4, 0, 2, 1, 1, 0 },
-
- /* ARM L13: 200 MHz */
- { 0, 1, 3, 0, 1, 1, 1, 0 },
+ APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
+ APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
+ APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
+ APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
+ APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
+ APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
+ APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
+ APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
+ APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
+ APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
+ APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
+ APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
+ APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
+ APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
};
-static unsigned int clkdiv_cpu0_4412[CPUFREQ_LEVEL_END][8] = {
+static struct apll_freq apll_freq_4412[] = {
/*
- * Clock divider value for following
- * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
- * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ * values:
+ * freq
+ * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
+ * clock divider for COPY, HPM, CORES
+ * PLL M, P, S
*/
- /* ARM L0: 1500 MHz */
- { 0, 3, 7, 0, 6, 1, 2, 0 },
-
- /* ARM L1: 1400 MHz */
- { 0, 3, 7, 0, 6, 1, 2, 0 },
-
- /* ARM L2: 1300 MHz */
- { 0, 3, 7, 0, 5, 1, 2, 0 },
-
- /* ARM L3: 1200 MHz */
- { 0, 3, 7, 0, 5, 1, 2, 0 },
-
- /* ARM L4: 1100 MHz */
- { 0, 3, 6, 0, 4, 1, 2, 0 },
-
- /* ARM L5: 1000 MHz */
- { 0, 2, 5, 0, 4, 1, 1, 0 },
-
- /* ARM L6: 900 MHz */
- { 0, 2, 5, 0, 3, 1, 1, 0 },
-
- /* ARM L7: 800 MHz */
- { 0, 2, 5, 0, 3, 1, 1, 0 },
-
- /* ARM L8: 700 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L9: 600 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L10: 500 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L11: 400 MHz */
- { 0, 2, 4, 0, 3, 1, 1, 0 },
-
- /* ARM L12: 300 MHz */
- { 0, 2, 4, 0, 2, 1, 1, 0 },
-
- /* ARM L13: 200 MHz */
- { 0, 1, 3, 0, 1, 1, 1, 0 },
-};
-
-static unsigned int clkdiv_cpu1_4212[CPUFREQ_LEVEL_END][2] = {
- /* Clock divider value for following
- * { DIVCOPY, DIVHPM }
- */
- /* ARM L0: 1500 MHz */
- { 6, 0 },
-
- /* ARM L1: 1400 MHz */
- { 6, 0 },
-
- /* ARM L2: 1300 MHz */
- { 5, 0 },
-
- /* ARM L3: 1200 MHz */
- { 5, 0 },
-
- /* ARM L4: 1100 MHz */
- { 4, 0 },
-
- /* ARM L5: 1000 MHz */
- { 4, 0 },
-
- /* ARM L6: 900 MHz */
- { 3, 0 },
-
- /* ARM L7: 800 MHz */
- { 3, 0 },
-
- /* ARM L8: 700 MHz */
- { 3, 0 },
-
- /* ARM L9: 600 MHz */
- { 3, 0 },
-
- /* ARM L10: 500 MHz */
- { 3, 0 },
-
- /* ARM L11: 400 MHz */
- { 3, 0 },
-
- /* ARM L12: 300 MHz */
- { 3, 0 },
-
- /* ARM L13: 200 MHz */
- { 3, 0 },
-};
-
-static unsigned int clkdiv_cpu1_4412[CPUFREQ_LEVEL_END][3] = {
- /* Clock divider value for following
- * { DIVCOPY, DIVHPM, DIVCORES }
- */
- /* ARM L0: 1500 MHz */
- { 6, 0, 7 },
-
- /* ARM L1: 1400 MHz */
- { 6, 0, 6 },
-
- /* ARM L2: 1300 MHz */
- { 5, 0, 6 },
-
- /* ARM L3: 1200 MHz */
- { 5, 0, 5 },
-
- /* ARM L4: 1100 MHz */
- { 4, 0, 5 },
-
- /* ARM L5: 1000 MHz */
- { 4, 0, 4 },
-
- /* ARM L6: 900 MHz */
- { 3, 0, 4 },
-
- /* ARM L7: 800 MHz */
- { 3, 0, 3 },
-
- /* ARM L8: 700 MHz */
- { 3, 0, 3 },
-
- /* ARM L9: 600 MHz */
- { 3, 0, 2 },
-
- /* ARM L10: 500 MHz */
- { 3, 0, 2 },
-
- /* ARM L11: 400 MHz */
- { 3, 0, 1 },
-
- /* ARM L12: 300 MHz */
- { 3, 0, 1 },
-
- /* ARM L13: 200 MHz */
- { 3, 0, 0 },
-};
-
-static unsigned int exynos4x12_apll_pms_table[CPUFREQ_LEVEL_END] = {
- /* APLL FOUT L0: 1500 MHz */
- ((250 << 16) | (4 << 8) | (0x0)),
-
- /* APLL FOUT L1: 1400 MHz */
- ((175 << 16) | (3 << 8) | (0x0)),
-
- /* APLL FOUT L2: 1300 MHz */
- ((325 << 16) | (6 << 8) | (0x0)),
-
- /* APLL FOUT L3: 1200 MHz */
- ((200 << 16) | (4 << 8) | (0x0)),
-
- /* APLL FOUT L4: 1100 MHz */
- ((275 << 16) | (6 << 8) | (0x0)),
-
- /* APLL FOUT L5: 1000 MHz */
- ((125 << 16) | (3 << 8) | (0x0)),
-
- /* APLL FOUT L6: 900 MHz */
- ((150 << 16) | (4 << 8) | (0x0)),
-
- /* APLL FOUT L7: 800 MHz */
- ((100 << 16) | (3 << 8) | (0x0)),
-
- /* APLL FOUT L8: 700 MHz */
- ((175 << 16) | (3 << 8) | (0x1)),
-
- /* APLL FOUT L9: 600 MHz */
- ((200 << 16) | (4 << 8) | (0x1)),
-
- /* APLL FOUT L10: 500 MHz */
- ((125 << 16) | (3 << 8) | (0x1)),
-
- /* APLL FOUT L11 400 MHz */
- ((100 << 16) | (3 << 8) | (0x1)),
-
- /* APLL FOUT L12: 300 MHz */
- ((200 << 16) | (4 << 8) | (0x2)),
-
- /* APLL FOUT L13: 200 MHz */
- ((100 << 16) | (3 << 8) | (0x2)),
-};
-
-static const unsigned int asv_voltage_4x12[CPUFREQ_LEVEL_END] = {
- 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
- 1000000, 987500, 975000, 950000, 925000, 900000, 900000
+ APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
+ APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
+ APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
+ APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
+ APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
+ APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
+ APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
+ APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
+ APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
+ APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
+ APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
+ APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
+ APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
+ APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
};
static void exynos4x12_set_clkdiv(unsigned int div_index)
@@ -306,7 +105,7 @@
/* Change Divider - CPU0 */
- tmp = exynos4x12_clkdiv_table[div_index].clkdiv;
+ tmp = apll_freq_4x12[div_index].clk_div_cpu0;
__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
@@ -314,7 +113,7 @@
cpu_relax();
/* Change Divider - CPU1 */
- tmp = exynos4x12_clkdiv_table[div_index].clkdiv1;
+ tmp = apll_freq_4x12[div_index].clk_div_cpu1;
__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
if (soc_is_exynos4212())
@@ -341,14 +140,14 @@
} while (tmp != 0x2);
/* 2. Set APLL Lock time */
- pdiv = ((exynos4x12_apll_pms_table[index] >> 8) & 0x3f);
+ pdiv = ((apll_freq_4x12[index].mps >> 8) & 0x3f);
__raw_writel((pdiv * 250), EXYNOS4_APLL_LOCK);
/* 3. Change PLL PMS values */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos4x12_apll_pms_table[index];
+ tmp |= apll_freq_4x12[index].mps;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 4. wait_lock_time */
@@ -367,10 +166,10 @@
} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}
-bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index)
+static bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index)
{
- unsigned int old_pm = exynos4x12_apll_pms_table[old_index] >> 8;
- unsigned int new_pm = exynos4x12_apll_pms_table[new_index] >> 8;
+ unsigned int old_pm = apll_freq_4x12[old_index].mps >> 8;
+ unsigned int new_pm = apll_freq_4x12[new_index].mps >> 8;
return (old_pm == new_pm) ? 0 : 1;
}
@@ -387,7 +186,7 @@
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_4x12[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
} else {
@@ -402,7 +201,7 @@
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_4x12[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 2. Change the system clock divider values */
exynos4x12_set_clkdiv(new_index);
@@ -416,27 +215,10 @@
}
}
-static void __init set_volt_table(void)
-{
- unsigned int i;
-
- max_support_idx = L1;
-
- /* Not supported */
- exynos4x12_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
-
- for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
- exynos4x12_volt_table[i] = asv_voltage_4x12[i];
-}
-
int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
{
- int i;
- unsigned int tmp;
unsigned long rate;
- set_volt_table();
-
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
@@ -455,66 +237,14 @@
if (IS_ERR(mout_apll))
goto err_mout_apll;
- for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
-
- exynos4x12_clkdiv_table[i].index = i;
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
-
- tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
- EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
- EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
- EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
- EXYNOS4_CLKDIV_CPU0_ATB_MASK |
- EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
- EXYNOS4_CLKDIV_CPU0_APLL_MASK);
-
- if (soc_is_exynos4212()) {
- tmp |= ((clkdiv_cpu0_4212[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
- (clkdiv_cpu0_4212[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
- (clkdiv_cpu0_4212[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
- (clkdiv_cpu0_4212[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
- (clkdiv_cpu0_4212[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
- (clkdiv_cpu0_4212[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
- (clkdiv_cpu0_4212[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
- } else {
- tmp &= ~EXYNOS4_CLKDIV_CPU0_CORE2_MASK;
-
- tmp |= ((clkdiv_cpu0_4412[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
- (clkdiv_cpu0_4412[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
- (clkdiv_cpu0_4412[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
- (clkdiv_cpu0_4412[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
- (clkdiv_cpu0_4412[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
- (clkdiv_cpu0_4412[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
- (clkdiv_cpu0_4412[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) |
- (clkdiv_cpu0_4412[i][7] << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT));
- }
-
- exynos4x12_clkdiv_table[i].clkdiv = tmp;
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
-
- if (soc_is_exynos4212()) {
- tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
- EXYNOS4_CLKDIV_CPU1_HPM_MASK);
- tmp |= ((clkdiv_cpu1_4212[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
- (clkdiv_cpu1_4212[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT));
- } else {
- tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
- EXYNOS4_CLKDIV_CPU1_HPM_MASK |
- EXYNOS4_CLKDIV_CPU1_CORES_MASK);
- tmp |= ((clkdiv_cpu1_4412[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
- (clkdiv_cpu1_4412[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) |
- (clkdiv_cpu1_4412[i][2] << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT));
- }
- exynos4x12_clkdiv_table[i].clkdiv1 = tmp;
- }
+ if (soc_is_exynos4212())
+ apll_freq_4x12 = apll_freq_4212;
+ else
+ apll_freq_4x12 = apll_freq_4412;
info->mpll_freq_khz = rate;
- info->pm_lock_idx = L5;
+ /* 800Mhz */
info->pll_safe_idx = L7;
- info->max_support_idx = max_support_idx;
- info->min_support_idx = min_support_idx;
info->cpu_clk = cpu_clk;
info->volt_table = exynos4x12_volt_table;
info->freq_table = exynos4x12_freq_table;
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index e64c253..b934486 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -21,23 +21,18 @@
#include <mach/regs-clock.h>
#include <mach/cpufreq.h>
-#define CPUFREQ_LEVEL_END (L15 + 1)
-
-static int max_support_idx;
-static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
-struct cpufreq_clkdiv {
- unsigned int index;
- unsigned int clkdiv;
- unsigned int clkdiv1;
+static unsigned int exynos5250_volt_table[] = {
+ 1300000, 1250000, 1225000, 1200000, 1150000,
+ 1125000, 1100000, 1075000, 1050000, 1025000,
+ 1012500, 1000000, 975000, 950000, 937500,
+ 925000
};
-static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
-
static struct cpufreq_frequency_table exynos5250_freq_table[] = {
{L0, 1700 * 1000},
{L1, 1600 * 1000},
@@ -47,8 +42,8 @@
{L5, 1200 * 1000},
{L6, 1100 * 1000},
{L7, 1000 * 1000},
- {L8, 900 * 1000},
- {L9, 800 * 1000},
+ {L8, 900 * 1000},
+ {L9, 800 * 1000},
{L10, 700 * 1000},
{L11, 600 * 1000},
{L12, 500 * 1000},
@@ -58,78 +53,30 @@
{0, CPUFREQ_TABLE_END},
};
-static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
-
-static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
+static struct apll_freq apll_freq_5250[] = {
/*
- * Clock divider value for following
- * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
+ * values:
+ * freq
+ * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
+ * clock divider for COPY, HPM, RESERVED
+ * PLL M, P, S
*/
- { 0, 3, 7, 7, 7, 3, 5, 0 }, /* 1700 MHz */
- { 0, 3, 7, 7, 7, 1, 4, 0 }, /* 1600 MHz */
- { 0, 2, 7, 7, 7, 1, 4, 0 }, /* 1500 MHz */
- { 0, 2, 7, 7, 6, 1, 4, 0 }, /* 1400 MHz */
- { 0, 2, 7, 7, 6, 1, 3, 0 }, /* 1300 MHz */
- { 0, 2, 7, 7, 5, 1, 3, 0 }, /* 1200 MHz */
- { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1100 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 1000 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 900 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 800 MHz */
- { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 700 MHz */
- { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 600 MHz */
- { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 500 MHz */
- { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 400 MHz */
- { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 300 MHz */
- { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 200 MHz */
-};
-
-static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
- /* Clock divider value for following
- * { COPY, HPM }
- */
- { 0, 2 }, /* 1700 MHz */
- { 0, 2 }, /* 1600 MHz */
- { 0, 2 }, /* 1500 MHz */
- { 0, 2 }, /* 1400 MHz */
- { 0, 2 }, /* 1300 MHz */
- { 0, 2 }, /* 1200 MHz */
- { 0, 2 }, /* 1100 MHz */
- { 0, 2 }, /* 1000 MHz */
- { 0, 2 }, /* 900 MHz */
- { 0, 2 }, /* 800 MHz */
- { 0, 2 }, /* 700 MHz */
- { 0, 2 }, /* 600 MHz */
- { 0, 2 }, /* 500 MHz */
- { 0, 2 }, /* 400 MHz */
- { 0, 2 }, /* 300 MHz */
- { 0, 2 }, /* 200 MHz */
-};
-
-static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
- ((425 << 16) | (6 << 8) | 0), /* 1700 MHz */
- ((200 << 16) | (3 << 8) | 0), /* 1600 MHz */
- ((250 << 16) | (4 << 8) | 0), /* 1500 MHz */
- ((175 << 16) | (3 << 8) | 0), /* 1400 MHz */
- ((325 << 16) | (6 << 8) | 0), /* 1300 MHz */
- ((200 << 16) | (4 << 8) | 0), /* 1200 MHz */
- ((275 << 16) | (6 << 8) | 0), /* 1100 MHz */
- ((125 << 16) | (3 << 8) | 0), /* 1000 MHz */
- ((150 << 16) | (4 << 8) | 0), /* 900 MHz */
- ((100 << 16) | (3 << 8) | 0), /* 800 MHz */
- ((175 << 16) | (3 << 8) | 1), /* 700 MHz */
- ((200 << 16) | (4 << 8) | 1), /* 600 MHz */
- ((125 << 16) | (3 << 8) | 1), /* 500 MHz */
- ((100 << 16) | (3 << 8) | 1), /* 400 MHz */
- ((200 << 16) | (4 << 8) | 2), /* 300 MHz */
- ((100 << 16) | (3 << 8) | 2), /* 200 MHz */
-};
-
-/* ASV group voltage table */
-static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
+ APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
+ APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
+ APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
+ APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
+ APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
+ APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
+ APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
+ APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
+ APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
+ APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
+ APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
+ APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
+ APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
+ APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
+ APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
+ APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
};
static void set_clkdiv(unsigned int div_index)
@@ -138,7 +85,7 @@
/* Change Divider - CPU0 */
- tmp = exynos5250_clkdiv_table[div_index].clkdiv;
+ tmp = apll_freq_5250[div_index].clk_div_cpu0;
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
@@ -146,7 +93,7 @@
cpu_relax();
/* Change Divider - CPU1 */
- tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
+ tmp = apll_freq_5250[div_index].clk_div_cpu1;
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
@@ -169,14 +116,14 @@
} while (tmp != 0x2);
/* 2. Set APLL Lock time */
- pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
+ pdiv = ((apll_freq_5250[new_index].mps >> 8) & 0x3f);
__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
/* 3. Change PLL PMS values */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos5_apll_pms_table[new_index];
+ tmp |= apll_freq_5250[new_index].mps;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
/* 4. wait_lock_time */
@@ -196,10 +143,10 @@
}
-bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
+static bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
{
- unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
- unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
+ unsigned int old_pm = apll_freq_5250[old_index].mps >> 8;
+ unsigned int new_pm = apll_freq_5250[new_index].mps >> 8;
return (old_pm == new_pm) ? 0 : 1;
}
@@ -216,7 +163,7 @@
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_5250[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
} else {
@@ -231,7 +178,7 @@
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_5250[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
/* 2. Change the system clock divider values */
set_clkdiv(new_index);
@@ -245,24 +192,10 @@
}
}
-static void __init set_volt_table(void)
-{
- unsigned int i;
-
- max_support_idx = L0;
-
- for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
- exynos5250_volt_table[i] = asv_voltage_5250[i];
-}
-
int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
{
- int i;
- unsigned int tmp;
unsigned long rate;
- set_volt_table();
-
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
@@ -281,44 +214,9 @@
if (IS_ERR(mout_apll))
goto err_mout_apll;
- for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
-
- exynos5250_clkdiv_table[i].index = i;
-
- tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
-
- tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
- (0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
- (0x7 << 24) | (0x7 << 28));
-
- tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
- (clkdiv_cpu0_5250[i][1] << 4) |
- (clkdiv_cpu0_5250[i][2] << 8) |
- (clkdiv_cpu0_5250[i][3] << 12) |
- (clkdiv_cpu0_5250[i][4] << 16) |
- (clkdiv_cpu0_5250[i][5] << 20) |
- (clkdiv_cpu0_5250[i][6] << 24) |
- (clkdiv_cpu0_5250[i][7] << 28));
-
- exynos5250_clkdiv_table[i].clkdiv = tmp;
-
- tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
-
- tmp &= ~((0x7 << 0) | (0x7 << 4));
-
- tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
- (clkdiv_cpu1_5250[i][1] << 4));
-
- exynos5250_clkdiv_table[i].clkdiv1 = tmp;
- }
-
info->mpll_freq_khz = rate;
- /* 1000Mhz */
- info->pm_lock_idx = L7;
/* 800Mhz */
info->pll_safe_idx = L9;
- info->max_support_idx = max_support_idx;
- info->min_support_idx = min_support_idx;
info->cpu_clk = cpu_clk;
info->volt_table = exynos5250_volt_table;
info->freq_table = exynos5250_freq_table;
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 49cda25..d7a7966 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -63,9 +63,6 @@
pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
policy->min, policy->max, policy->cpu);
- if (!cpu_online(policy->cpu))
- return -EINVAL;
-
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
@@ -121,9 +118,6 @@
break;
}
- if (!cpu_online(policy->cpu))
- return -EINVAL;
-
for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency;
if (freq == CPUFREQ_ENTRY_INVALID)
@@ -227,6 +221,15 @@
}
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr);
+void cpufreq_frequency_table_update_policy_cpu(struct cpufreq_policy *policy)
+{
+ pr_debug("Updating show_table for new_cpu %u from last_cpu %u\n",
+ policy->cpu, policy->last_cpu);
+ per_cpu(cpufreq_show_table, policy->cpu) = per_cpu(cpufreq_show_table,
+ policy->last_cpu);
+ per_cpu(cpufreq_show_table, policy->last_cpu) = NULL;
+}
+
struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu)
{
return per_cpu(cpufreq_show_table, cpu);
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
new file mode 100644
index 0000000..66e3a71
--- /dev/null
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver provides the clk notifier callbacks that are used when
+ * the cpufreq-cpu0 driver changes to frequency to alert the highbank
+ * EnergyCore Management Engine (ECME) about the need to change
+ * voltage. The ECME interfaces with the actual voltage regulators.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/mailbox.h>
+#include <linux/platform_device.h>
+
+#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
+#define HB_CPUFREQ_IPC_LEN 7
+#define HB_CPUFREQ_VOLT_RETRIES 15
+
+static int hb_voltage_change(unsigned int freq)
+{
+ int i;
+ u32 msg[HB_CPUFREQ_IPC_LEN];
+
+ msg[0] = HB_CPUFREQ_CHANGE_NOTE;
+ msg[1] = freq / 1000000;
+ for (i = 2; i < HB_CPUFREQ_IPC_LEN; i++)
+ msg[i] = 0;
+
+ return pl320_ipc_transmit(msg);
+}
+
+static int hb_cpufreq_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *hclk)
+{
+ struct clk_notifier_data *clk_data = hclk;
+ int i = 0;
+
+ if (action == PRE_RATE_CHANGE) {
+ if (clk_data->new_rate > clk_data->old_rate)
+ while (hb_voltage_change(clk_data->new_rate))
+ if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+ return NOTIFY_BAD;
+ } else if (action == POST_RATE_CHANGE) {
+ if (clk_data->new_rate < clk_data->old_rate)
+ while (hb_voltage_change(clk_data->new_rate))
+ if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+ return NOTIFY_BAD;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block hb_cpufreq_clk_nb = {
+ .notifier_call = hb_cpufreq_clk_notify,
+};
+
+static int hb_cpufreq_driver_init(void)
+{
+ struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ struct device *cpu_dev;
+ struct clk *cpu_clk;
+ struct device_node *np;
+ int ret;
+
+ if (!of_machine_is_compatible("calxeda,highbank"))
+ return -ENODEV;
+
+ for_each_child_of_node(of_find_node_by_path("/cpus"), np)
+ if (of_get_property(np, "operating-points", NULL))
+ break;
+
+ if (!np) {
+ pr_err("failed to find highbank cpufreq node\n");
+ return -ENOENT;
+ }
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get highbank cpufreq device\n");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cpu_dev->of_node = np;
+
+ cpu_clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(cpu_clk)) {
+ ret = PTR_ERR(cpu_clk);
+ pr_err("failed to get cpu0 clock: %d\n", ret);
+ goto out_put_node;
+ }
+
+ ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
+ if (ret) {
+ pr_err("failed to register clk notifier: %d\n", ret);
+ goto out_put_node;
+ }
+
+ /* Instantiate cpufreq-cpu0 */
+ platform_device_register_full(&devinfo);
+
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+module_init(hb_cpufreq_driver_init);
+
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
+MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
new file mode 100644
index 0000000..d6b6ef3
--- /dev/null
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define PU_SOC_VOLTAGE_NORMAL 1250000
+#define PU_SOC_VOLTAGE_HIGH 1275000
+#define FREQ_1P2_GHZ 1200000000
+
+static struct regulator *arm_reg;
+static struct regulator *pu_reg;
+static struct regulator *soc_reg;
+
+static struct clk *arm_clk;
+static struct clk *pll1_sys_clk;
+static struct clk *pll1_sw_clk;
+static struct clk *step_clk;
+static struct clk *pll2_pfd2_396m_clk;
+
+static struct device *cpu_dev;
+static struct cpufreq_frequency_table *freq_table;
+static unsigned int transition_latency;
+
+static int imx6q_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static unsigned int imx6q_get_speed(unsigned int cpu)
+{
+ return clk_get_rate(arm_clk) / 1000;
+}
+
+static int imx6q_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ struct opp *opp;
+ unsigned long freq_hz, volt, volt_old;
+ unsigned int index, cpu;
+ int ret;
+
+ ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
+ relation, &index);
+ if (ret) {
+ dev_err(cpu_dev, "failed to match target frequency %d: %d\n",
+ target_freq, ret);
+ return ret;
+ }
+
+ freqs.new = freq_table[index].frequency;
+ freq_hz = freqs.new * 1000;
+ freqs.old = clk_get_rate(arm_clk) / 1000;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ rcu_read_lock();
+ opp = opp_find_freq_ceil(cpu_dev, &freq_hz);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
+ return PTR_ERR(opp);
+ }
+
+ volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+ volt_old = regulator_get_voltage(arm_reg);
+
+ dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
+ freqs.old / 1000, volt_old / 1000,
+ freqs.new / 1000, volt / 1000);
+
+ /* scaling up? scale voltage before frequency */
+ if (freqs.new > freqs.old) {
+ ret = regulator_set_voltage_tol(arm_reg, volt, 0);
+ if (ret) {
+ dev_err(cpu_dev,
+ "failed to scale vddarm up: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Need to increase vddpu and vddsoc for safety
+ * if we are about to run at 1.2 GHz.
+ */
+ if (freqs.new == FREQ_1P2_GHZ / 1000) {
+ regulator_set_voltage_tol(pu_reg,
+ PU_SOC_VOLTAGE_HIGH, 0);
+ regulator_set_voltage_tol(soc_reg,
+ PU_SOC_VOLTAGE_HIGH, 0);
+ }
+ }
+
+ /*
+ * The setpoints are selected per PLL/PDF frequencies, so we need to
+ * reprogram PLL for frequency scaling. The procedure of reprogramming
+ * PLL1 is as below.
+ *
+ * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it
+ * - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
+ * - Disable pll2_pfd2_396m_clk
+ */
+ clk_prepare_enable(pll2_pfd2_396m_clk);
+ clk_set_parent(step_clk, pll2_pfd2_396m_clk);
+ clk_set_parent(pll1_sw_clk, step_clk);
+ if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
+ clk_set_rate(pll1_sys_clk, freqs.new * 1000);
+ /*
+ * If we are leaving 396 MHz set-point, we need to enable
+ * pll1_sys_clk and disable pll2_pfd2_396m_clk to keep
+ * their use count correct.
+ */
+ if (freqs.old * 1000 <= clk_get_rate(pll2_pfd2_396m_clk)) {
+ clk_prepare_enable(pll1_sys_clk);
+ clk_disable_unprepare(pll2_pfd2_396m_clk);
+ }
+ clk_set_parent(pll1_sw_clk, pll1_sys_clk);
+ clk_disable_unprepare(pll2_pfd2_396m_clk);
+ } else {
+ /*
+ * Disable pll1_sys_clk if pll2_pfd2_396m_clk is sufficient
+ * to provide the frequency.
+ */
+ clk_disable_unprepare(pll1_sys_clk);
+ }
+
+ /* Ensure the arm clock divider is what we expect */
+ ret = clk_set_rate(arm_clk, freqs.new * 1000);
+ if (ret) {
+ dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
+ regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ return ret;
+ }
+
+ /* scaling down? scale voltage after frequency */
+ if (freqs.new < freqs.old) {
+ ret = regulator_set_voltage_tol(arm_reg, volt, 0);
+ if (ret)
+ dev_warn(cpu_dev,
+ "failed to scale vddarm down: %d\n", ret);
+
+ if (freqs.old == FREQ_1P2_GHZ / 1000) {
+ regulator_set_voltage_tol(pu_reg,
+ PU_SOC_VOLTAGE_NORMAL, 0);
+ regulator_set_voltage_tol(soc_reg,
+ PU_SOC_VOLTAGE_NORMAL, 0);
+ }
+ }
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return 0;
+}
+
+static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "invalid frequency table: %d\n", ret);
+ return ret;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = clk_get_rate(arm_clk) / 1000;
+ cpumask_setall(policy->cpus);
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+
+ return 0;
+}
+
+static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *imx6q_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver imx6q_cpufreq_driver = {
+ .verify = imx6q_verify_speed,
+ .target = imx6q_set_target,
+ .get = imx6q_get_speed,
+ .init = imx6q_cpufreq_init,
+ .exit = imx6q_cpufreq_exit,
+ .name = "imx6q-cpufreq",
+ .attr = imx6q_cpufreq_attr,
+};
+
+static int imx6q_cpufreq_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct opp *opp;
+ unsigned long min_volt, max_volt;
+ int num, ret;
+
+ cpu_dev = &pdev->dev;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ dev_err(cpu_dev, "failed to find cpu0 node\n");
+ return -ENOENT;
+ }
+
+ cpu_dev->of_node = np;
+
+ arm_clk = devm_clk_get(cpu_dev, "arm");
+ pll1_sys_clk = devm_clk_get(cpu_dev, "pll1_sys");
+ pll1_sw_clk = devm_clk_get(cpu_dev, "pll1_sw");
+ step_clk = devm_clk_get(cpu_dev, "step");
+ pll2_pfd2_396m_clk = devm_clk_get(cpu_dev, "pll2_pfd2_396m");
+ if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
+ IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
+ dev_err(cpu_dev, "failed to get clocks\n");
+ ret = -ENOENT;
+ goto put_node;
+ }
+
+ arm_reg = devm_regulator_get(cpu_dev, "arm");
+ pu_reg = devm_regulator_get(cpu_dev, "pu");
+ soc_reg = devm_regulator_get(cpu_dev, "soc");
+ if (!arm_reg || !pu_reg || !soc_reg) {
+ dev_err(cpu_dev, "failed to get regulators\n");
+ ret = -ENOENT;
+ goto put_node;
+ }
+
+ /* We expect an OPP table supplied by platform */
+ num = opp_get_opp_count(cpu_dev);
+ if (num < 0) {
+ ret = num;
+ dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
+ goto put_node;
+ }
+
+ ret = opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+ goto put_node;
+ }
+
+ if (of_property_read_u32(np, "clock-latency", &transition_latency))
+ transition_latency = CPUFREQ_ETERNAL;
+
+ /*
+ * OPP is maintained in order of increasing frequency, and
+ * freq_table initialised from OPP is therefore sorted in the
+ * same order.
+ */
+ rcu_read_lock();
+ opp = opp_find_freq_exact(cpu_dev,
+ freq_table[0].frequency * 1000, true);
+ min_volt = opp_get_voltage(opp);
+ opp = opp_find_freq_exact(cpu_dev,
+ freq_table[--num].frequency * 1000, true);
+ max_volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+ ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
+ if (ret > 0)
+ transition_latency += ret * 1000;
+
+ /* Count vddpu and vddsoc latency in for 1.2 GHz support */
+ if (freq_table[num].frequency == FREQ_1P2_GHZ / 1000) {
+ ret = regulator_set_voltage_time(pu_reg, PU_SOC_VOLTAGE_NORMAL,
+ PU_SOC_VOLTAGE_HIGH);
+ if (ret > 0)
+ transition_latency += ret * 1000;
+ ret = regulator_set_voltage_time(soc_reg, PU_SOC_VOLTAGE_NORMAL,
+ PU_SOC_VOLTAGE_HIGH);
+ if (ret > 0)
+ transition_latency += ret * 1000;
+ }
+
+ ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
+ if (ret) {
+ dev_err(cpu_dev, "failed register driver: %d\n", ret);
+ goto free_freq_table;
+ }
+
+ of_node_put(np);
+ return 0;
+
+free_freq_table:
+ opp_free_cpufreq_table(cpu_dev, &freq_table);
+put_node:
+ of_node_put(np);
+ return ret;
+}
+
+static int imx6q_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_unregister_driver(&imx6q_cpufreq_driver);
+ opp_free_cpufreq_table(cpu_dev, &freq_table);
+
+ return 0;
+}
+
+static struct platform_driver imx6q_cpufreq_platdrv = {
+ .driver = {
+ .name = "imx6q-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = imx6q_cpufreq_probe,
+ .remove = imx6q_cpufreq_remove,
+};
+module_platform_driver(imx6q_cpufreq_platdrv);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
new file mode 100644
index 0000000..096fde0
--- /dev/null
+++ b/drivers/cpufreq/intel_pstate.c
@@ -0,0 +1,823 @@
+/*
+ * cpufreq_snb.c: Native P state management for Intel processors
+ *
+ * (C) Copyright 2012 Intel Corporation
+ * Author: Dirk Brandewie <dirk.j.brandewie@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <trace/events/power.h>
+
+#include <asm/div64.h>
+#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
+
+#define SAMPLE_COUNT 3
+
+#define FRAC_BITS 8
+#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
+#define fp_toint(X) ((X) >> FRAC_BITS)
+
+static inline int32_t mul_fp(int32_t x, int32_t y)
+{
+ return ((int64_t)x * (int64_t)y) >> FRAC_BITS;
+}
+
+static inline int32_t div_fp(int32_t x, int32_t y)
+{
+ return div_s64((int64_t)x << FRAC_BITS, (int64_t)y);
+}
+
+struct sample {
+ ktime_t start_time;
+ ktime_t end_time;
+ int core_pct_busy;
+ int pstate_pct_busy;
+ u64 duration_us;
+ u64 idletime_us;
+ u64 aperf;
+ u64 mperf;
+ int freq;
+};
+
+struct pstate_data {
+ int current_pstate;
+ int min_pstate;
+ int max_pstate;
+ int turbo_pstate;
+};
+
+struct _pid {
+ int setpoint;
+ int32_t integral;
+ int32_t p_gain;
+ int32_t i_gain;
+ int32_t d_gain;
+ int deadband;
+ int last_err;
+};
+
+struct cpudata {
+ int cpu;
+
+ char name[64];
+
+ struct timer_list timer;
+
+ struct pstate_adjust_policy *pstate_policy;
+ struct pstate_data pstate;
+ struct _pid pid;
+ struct _pid idle_pid;
+
+ int min_pstate_count;
+ int idle_mode;
+
+ ktime_t prev_sample;
+ u64 prev_idle_time_us;
+ u64 prev_aperf;
+ u64 prev_mperf;
+ int sample_ptr;
+ struct sample samples[SAMPLE_COUNT];
+};
+
+static struct cpudata **all_cpu_data;
+struct pstate_adjust_policy {
+ int sample_rate_ms;
+ int deadband;
+ int setpoint;
+ int p_gain_pct;
+ int d_gain_pct;
+ int i_gain_pct;
+};
+
+static struct pstate_adjust_policy default_policy = {
+ .sample_rate_ms = 10,
+ .deadband = 0,
+ .setpoint = 109,
+ .p_gain_pct = 17,
+ .d_gain_pct = 0,
+ .i_gain_pct = 4,
+};
+
+struct perf_limits {
+ int no_turbo;
+ int max_perf_pct;
+ int min_perf_pct;
+ int32_t max_perf;
+ int32_t min_perf;
+};
+
+static struct perf_limits limits = {
+ .no_turbo = 0,
+ .max_perf_pct = 100,
+ .max_perf = int_tofp(1),
+ .min_perf_pct = 0,
+ .min_perf = 0,
+};
+
+static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
+ int deadband, int integral) {
+ pid->setpoint = setpoint;
+ pid->deadband = deadband;
+ pid->integral = int_tofp(integral);
+ pid->last_err = setpoint - busy;
+}
+
+static inline void pid_p_gain_set(struct _pid *pid, int percent)
+{
+ pid->p_gain = div_fp(int_tofp(percent), int_tofp(100));
+}
+
+static inline void pid_i_gain_set(struct _pid *pid, int percent)
+{
+ pid->i_gain = div_fp(int_tofp(percent), int_tofp(100));
+}
+
+static inline void pid_d_gain_set(struct _pid *pid, int percent)
+{
+
+ pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
+}
+
+static signed int pid_calc(struct _pid *pid, int busy)
+{
+ signed int err, result;
+ int32_t pterm, dterm, fp_error;
+ int32_t integral_limit;
+
+ err = pid->setpoint - busy;
+ fp_error = int_tofp(err);
+
+ if (abs(err) <= pid->deadband)
+ return 0;
+
+ pterm = mul_fp(pid->p_gain, fp_error);
+
+ pid->integral += fp_error;
+
+ /* limit the integral term */
+ integral_limit = int_tofp(30);
+ if (pid->integral > integral_limit)
+ pid->integral = integral_limit;
+ if (pid->integral < -integral_limit)
+ pid->integral = -integral_limit;
+
+ dterm = mul_fp(pid->d_gain, (err - pid->last_err));
+ pid->last_err = err;
+
+ result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm;
+
+ return (signed int)fp_toint(result);
+}
+
+static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu)
+{
+ pid_p_gain_set(&cpu->pid, cpu->pstate_policy->p_gain_pct);
+ pid_d_gain_set(&cpu->pid, cpu->pstate_policy->d_gain_pct);
+ pid_i_gain_set(&cpu->pid, cpu->pstate_policy->i_gain_pct);
+
+ pid_reset(&cpu->pid,
+ cpu->pstate_policy->setpoint,
+ 100,
+ cpu->pstate_policy->deadband,
+ 0);
+}
+
+static inline void intel_pstate_idle_pid_reset(struct cpudata *cpu)
+{
+ pid_p_gain_set(&cpu->idle_pid, cpu->pstate_policy->p_gain_pct);
+ pid_d_gain_set(&cpu->idle_pid, cpu->pstate_policy->d_gain_pct);
+ pid_i_gain_set(&cpu->idle_pid, cpu->pstate_policy->i_gain_pct);
+
+ pid_reset(&cpu->idle_pid,
+ 75,
+ 50,
+ cpu->pstate_policy->deadband,
+ 0);
+}
+
+static inline void intel_pstate_reset_all_pid(void)
+{
+ unsigned int cpu;
+ for_each_online_cpu(cpu) {
+ if (all_cpu_data[cpu])
+ intel_pstate_busy_pid_reset(all_cpu_data[cpu]);
+ }
+}
+
+/************************** debugfs begin ************************/
+static int pid_param_set(void *data, u64 val)
+{
+ *(u32 *)data = val;
+ intel_pstate_reset_all_pid();
+ return 0;
+}
+static int pid_param_get(void *data, u64 *val)
+{
+ *val = *(u32 *)data;
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_pid_param, pid_param_get,
+ pid_param_set, "%llu\n");
+
+struct pid_param {
+ char *name;
+ void *value;
+};
+
+static struct pid_param pid_files[] = {
+ {"sample_rate_ms", &default_policy.sample_rate_ms},
+ {"d_gain_pct", &default_policy.d_gain_pct},
+ {"i_gain_pct", &default_policy.i_gain_pct},
+ {"deadband", &default_policy.deadband},
+ {"setpoint", &default_policy.setpoint},
+ {"p_gain_pct", &default_policy.p_gain_pct},
+ {NULL, NULL}
+};
+
+static struct dentry *debugfs_parent;
+static void intel_pstate_debug_expose_params(void)
+{
+ int i = 0;
+
+ debugfs_parent = debugfs_create_dir("pstate_snb", NULL);
+ if (IS_ERR_OR_NULL(debugfs_parent))
+ return;
+ while (pid_files[i].name) {
+ debugfs_create_file(pid_files[i].name, 0660,
+ debugfs_parent, pid_files[i].value,
+ &fops_pid_param);
+ i++;
+ }
+}
+
+/************************** debugfs end ************************/
+
+/************************** sysfs begin ************************/
+#define show_one(file_name, object) \
+ static ssize_t show_##file_name \
+ (struct kobject *kobj, struct attribute *attr, char *buf) \
+ { \
+ return sprintf(buf, "%u\n", limits.object); \
+ }
+
+static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf(buf, "%u", &input);
+ if (ret != 1)
+ return -EINVAL;
+ limits.no_turbo = clamp_t(int, input, 0 , 1);
+
+ return count;
+}
+
+static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf(buf, "%u", &input);
+ if (ret != 1)
+ return -EINVAL;
+
+ limits.max_perf_pct = clamp_t(int, input, 0 , 100);
+ limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
+ return count;
+}
+
+static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf(buf, "%u", &input);
+ if (ret != 1)
+ return -EINVAL;
+ limits.min_perf_pct = clamp_t(int, input, 0 , 100);
+ limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
+
+ return count;
+}
+
+show_one(no_turbo, no_turbo);
+show_one(max_perf_pct, max_perf_pct);
+show_one(min_perf_pct, min_perf_pct);
+
+define_one_global_rw(no_turbo);
+define_one_global_rw(max_perf_pct);
+define_one_global_rw(min_perf_pct);
+
+static struct attribute *intel_pstate_attributes[] = {
+ &no_turbo.attr,
+ &max_perf_pct.attr,
+ &min_perf_pct.attr,
+ NULL
+};
+
+static struct attribute_group intel_pstate_attr_group = {
+ .attrs = intel_pstate_attributes,
+};
+static struct kobject *intel_pstate_kobject;
+
+static void intel_pstate_sysfs_expose_params(void)
+{
+ int rc;
+
+ intel_pstate_kobject = kobject_create_and_add("intel_pstate",
+ &cpu_subsys.dev_root->kobj);
+ BUG_ON(!intel_pstate_kobject);
+ rc = sysfs_create_group(intel_pstate_kobject,
+ &intel_pstate_attr_group);
+ BUG_ON(rc);
+}
+
+/************************** sysfs end ************************/
+
+static int intel_pstate_min_pstate(void)
+{
+ u64 value;
+ rdmsrl(0xCE, value);
+ return (value >> 40) & 0xFF;
+}
+
+static int intel_pstate_max_pstate(void)
+{
+ u64 value;
+ rdmsrl(0xCE, value);
+ return (value >> 8) & 0xFF;
+}
+
+static int intel_pstate_turbo_pstate(void)
+{
+ u64 value;
+ int nont, ret;
+ rdmsrl(0x1AD, value);
+ nont = intel_pstate_max_pstate();
+ ret = ((value) & 255);
+ if (ret <= nont)
+ ret = nont;
+ return ret;
+}
+
+static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
+{
+ int max_perf = cpu->pstate.turbo_pstate;
+ int min_perf;
+ if (limits.no_turbo)
+ max_perf = cpu->pstate.max_pstate;
+
+ max_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf));
+ *max = clamp_t(int, max_perf,
+ cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
+
+ min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.min_perf));
+ *min = clamp_t(int, min_perf,
+ cpu->pstate.min_pstate, max_perf);
+}
+
+static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
+{
+ int max_perf, min_perf;
+
+ intel_pstate_get_min_max(cpu, &min_perf, &max_perf);
+
+ pstate = clamp_t(int, pstate, min_perf, max_perf);
+
+ if (pstate == cpu->pstate.current_pstate)
+ return;
+
+#ifndef MODULE
+ trace_cpu_frequency(pstate * 100000, cpu->cpu);
+#endif
+ cpu->pstate.current_pstate = pstate;
+ wrmsrl(MSR_IA32_PERF_CTL, pstate << 8);
+
+}
+
+static inline void intel_pstate_pstate_increase(struct cpudata *cpu, int steps)
+{
+ int target;
+ target = cpu->pstate.current_pstate + steps;
+
+ intel_pstate_set_pstate(cpu, target);
+}
+
+static inline void intel_pstate_pstate_decrease(struct cpudata *cpu, int steps)
+{
+ int target;
+ target = cpu->pstate.current_pstate - steps;
+ intel_pstate_set_pstate(cpu, target);
+}
+
+static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
+{
+ sprintf(cpu->name, "Intel 2nd generation core");
+
+ cpu->pstate.min_pstate = intel_pstate_min_pstate();
+ cpu->pstate.max_pstate = intel_pstate_max_pstate();
+ cpu->pstate.turbo_pstate = intel_pstate_turbo_pstate();
+
+ /*
+ * goto max pstate so we don't slow up boot if we are built-in if we are
+ * a module we will take care of it during normal operation
+ */
+ intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate);
+}
+
+static inline void intel_pstate_calc_busy(struct cpudata *cpu,
+ struct sample *sample)
+{
+ u64 core_pct;
+ sample->pstate_pct_busy = 100 - div64_u64(
+ sample->idletime_us * 100,
+ sample->duration_us);
+ core_pct = div64_u64(sample->aperf * 100, sample->mperf);
+ sample->freq = cpu->pstate.turbo_pstate * core_pct * 1000;
+
+ sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct),
+ 100);
+}
+
+static inline void intel_pstate_sample(struct cpudata *cpu)
+{
+ ktime_t now;
+ u64 idle_time_us;
+ u64 aperf, mperf;
+
+ now = ktime_get();
+ idle_time_us = get_cpu_idle_time_us(cpu->cpu, NULL);
+
+ rdmsrl(MSR_IA32_APERF, aperf);
+ rdmsrl(MSR_IA32_MPERF, mperf);
+ /* for the first sample, don't actually record a sample, just
+ * set the baseline */
+ if (cpu->prev_idle_time_us > 0) {
+ cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT;
+ cpu->samples[cpu->sample_ptr].start_time = cpu->prev_sample;
+ cpu->samples[cpu->sample_ptr].end_time = now;
+ cpu->samples[cpu->sample_ptr].duration_us =
+ ktime_us_delta(now, cpu->prev_sample);
+ cpu->samples[cpu->sample_ptr].idletime_us =
+ idle_time_us - cpu->prev_idle_time_us;
+
+ cpu->samples[cpu->sample_ptr].aperf = aperf;
+ cpu->samples[cpu->sample_ptr].mperf = mperf;
+ cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf;
+ cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf;
+
+ intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]);
+ }
+
+ cpu->prev_sample = now;
+ cpu->prev_idle_time_us = idle_time_us;
+ cpu->prev_aperf = aperf;
+ cpu->prev_mperf = mperf;
+}
+
+static inline void intel_pstate_set_sample_time(struct cpudata *cpu)
+{
+ int sample_time, delay;
+
+ sample_time = cpu->pstate_policy->sample_rate_ms;
+ delay = msecs_to_jiffies(sample_time);
+ delay -= jiffies % delay;
+ mod_timer_pinned(&cpu->timer, jiffies + delay);
+}
+
+static inline void intel_pstate_idle_mode(struct cpudata *cpu)
+{
+ cpu->idle_mode = 1;
+}
+
+static inline void intel_pstate_normal_mode(struct cpudata *cpu)
+{
+ cpu->idle_mode = 0;
+}
+
+static inline int intel_pstate_get_scaled_busy(struct cpudata *cpu)
+{
+ int32_t busy_scaled;
+ int32_t core_busy, turbo_pstate, current_pstate;
+
+ core_busy = int_tofp(cpu->samples[cpu->sample_ptr].core_pct_busy);
+ turbo_pstate = int_tofp(cpu->pstate.turbo_pstate);
+ current_pstate = int_tofp(cpu->pstate.current_pstate);
+ busy_scaled = mul_fp(core_busy, div_fp(turbo_pstate, current_pstate));
+
+ return fp_toint(busy_scaled);
+}
+
+static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
+{
+ int busy_scaled;
+ struct _pid *pid;
+ signed int ctl = 0;
+ int steps;
+
+ pid = &cpu->pid;
+ busy_scaled = intel_pstate_get_scaled_busy(cpu);
+
+ ctl = pid_calc(pid, busy_scaled);
+
+ steps = abs(ctl);
+ if (ctl < 0)
+ intel_pstate_pstate_increase(cpu, steps);
+ else
+ intel_pstate_pstate_decrease(cpu, steps);
+}
+
+static inline void intel_pstate_adjust_idle_pstate(struct cpudata *cpu)
+{
+ int busy_scaled;
+ struct _pid *pid;
+ int ctl = 0;
+ int steps;
+
+ pid = &cpu->idle_pid;
+
+ busy_scaled = intel_pstate_get_scaled_busy(cpu);
+
+ ctl = pid_calc(pid, 100 - busy_scaled);
+
+ steps = abs(ctl);
+ if (ctl < 0)
+ intel_pstate_pstate_decrease(cpu, steps);
+ else
+ intel_pstate_pstate_increase(cpu, steps);
+
+ if (cpu->pstate.current_pstate == cpu->pstate.min_pstate)
+ intel_pstate_normal_mode(cpu);
+}
+
+static void intel_pstate_timer_func(unsigned long __data)
+{
+ struct cpudata *cpu = (struct cpudata *) __data;
+
+ intel_pstate_sample(cpu);
+
+ if (!cpu->idle_mode)
+ intel_pstate_adjust_busy_pstate(cpu);
+ else
+ intel_pstate_adjust_idle_pstate(cpu);
+
+#if defined(XPERF_FIX)
+ if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) {
+ cpu->min_pstate_count++;
+ if (!(cpu->min_pstate_count % 5)) {
+ intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate);
+ intel_pstate_idle_mode(cpu);
+ }
+ } else
+ cpu->min_pstate_count = 0;
+#endif
+ intel_pstate_set_sample_time(cpu);
+}
+
+#define ICPU(model, policy) \
+ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, (unsigned long)&policy }
+
+static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
+ ICPU(0x2a, default_policy),
+ ICPU(0x2d, default_policy),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);
+
+static int intel_pstate_init_cpu(unsigned int cpunum)
+{
+
+ const struct x86_cpu_id *id;
+ struct cpudata *cpu;
+
+ id = x86_match_cpu(intel_pstate_cpu_ids);
+ if (!id)
+ return -ENODEV;
+
+ all_cpu_data[cpunum] = kzalloc(sizeof(struct cpudata), GFP_KERNEL);
+ if (!all_cpu_data[cpunum])
+ return -ENOMEM;
+
+ cpu = all_cpu_data[cpunum];
+
+ intel_pstate_get_cpu_pstates(cpu);
+
+ cpu->cpu = cpunum;
+ cpu->pstate_policy =
+ (struct pstate_adjust_policy *)id->driver_data;
+ init_timer_deferrable(&cpu->timer);
+ cpu->timer.function = intel_pstate_timer_func;
+ cpu->timer.data =
+ (unsigned long)cpu;
+ cpu->timer.expires = jiffies + HZ/100;
+ intel_pstate_busy_pid_reset(cpu);
+ intel_pstate_idle_pid_reset(cpu);
+ intel_pstate_sample(cpu);
+ intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate);
+
+ add_timer_on(&cpu->timer, cpunum);
+
+ pr_info("Intel pstate controlling: cpu %d\n", cpunum);
+
+ return 0;
+}
+
+static unsigned int intel_pstate_get(unsigned int cpu_num)
+{
+ struct sample *sample;
+ struct cpudata *cpu;
+
+ cpu = all_cpu_data[cpu_num];
+ if (!cpu)
+ return 0;
+ sample = &cpu->samples[cpu->sample_ptr];
+ return sample->freq;
+}
+
+static int intel_pstate_set_policy(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+ int min, max;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ intel_pstate_get_min_max(cpu, &min, &max);
+
+ limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
+ limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100);
+ limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
+
+ limits.max_perf_pct = policy->max * 100 / policy->cpuinfo.max_freq;
+ limits.max_perf_pct = clamp_t(int, limits.max_perf_pct, 0 , 100);
+ limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
+
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ limits.min_perf_pct = 100;
+ limits.min_perf = int_tofp(1);
+ limits.max_perf_pct = 100;
+ limits.max_perf = int_tofp(1);
+ limits.no_turbo = 0;
+ }
+
+ return 0;
+}
+
+static int intel_pstate_verify_policy(struct cpufreq_policy *policy)
+{
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+ (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __cpuinit intel_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+ int cpu = policy->cpu;
+
+ del_timer(&all_cpu_data[cpu]->timer);
+ kfree(all_cpu_data[cpu]);
+ all_cpu_data[cpu] = NULL;
+ return 0;
+}
+
+static int __cpuinit intel_pstate_cpu_init(struct cpufreq_policy *policy)
+{
+ int rc, min_pstate, max_pstate;
+ struct cpudata *cpu;
+
+ rc = intel_pstate_init_cpu(policy->cpu);
+ if (rc)
+ return rc;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ if (!limits.no_turbo &&
+ limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ else
+ policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+ intel_pstate_get_min_max(cpu, &min_pstate, &max_pstate);
+ policy->min = min_pstate * 100000;
+ policy->max = max_pstate * 100000;
+
+ /* cpuinfo and default policy values */
+ policy->cpuinfo.min_freq = cpu->pstate.min_pstate * 100000;
+ policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate * 100000;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ cpumask_set_cpu(policy->cpu, policy->cpus);
+
+ return 0;
+}
+
+static struct cpufreq_driver intel_pstate_driver = {
+ .flags = CPUFREQ_CONST_LOOPS,
+ .verify = intel_pstate_verify_policy,
+ .setpolicy = intel_pstate_set_policy,
+ .get = intel_pstate_get,
+ .init = intel_pstate_cpu_init,
+ .exit = intel_pstate_cpu_exit,
+ .name = "intel_pstate",
+ .owner = THIS_MODULE,
+};
+
+static void intel_pstate_exit(void)
+{
+ int cpu;
+
+ sysfs_remove_group(intel_pstate_kobject,
+ &intel_pstate_attr_group);
+ debugfs_remove_recursive(debugfs_parent);
+
+ cpufreq_unregister_driver(&intel_pstate_driver);
+
+ if (!all_cpu_data)
+ return;
+
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
+ if (all_cpu_data[cpu]) {
+ del_timer_sync(&all_cpu_data[cpu]->timer);
+ kfree(all_cpu_data[cpu]);
+ }
+ }
+
+ put_online_cpus();
+ vfree(all_cpu_data);
+}
+module_exit(intel_pstate_exit);
+
+static int __initdata no_load;
+
+static int __init intel_pstate_init(void)
+{
+ int rc = 0;
+ const struct x86_cpu_id *id;
+
+ if (no_load)
+ return -ENODEV;
+
+ id = x86_match_cpu(intel_pstate_cpu_ids);
+ if (!id)
+ return -ENODEV;
+
+ pr_info("Intel P-state driver initializing.\n");
+
+ all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus());
+ if (!all_cpu_data)
+ return -ENOMEM;
+ memset(all_cpu_data, 0, sizeof(void *) * num_possible_cpus());
+
+ rc = cpufreq_register_driver(&intel_pstate_driver);
+ if (rc)
+ goto out;
+
+ intel_pstate_debug_expose_params();
+ intel_pstate_sysfs_expose_params();
+ return rc;
+out:
+ intel_pstate_exit();
+ return -ENODEV;
+}
+device_initcall(intel_pstate_init);
+
+static int __init intel_pstate_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+
+ if (!strcmp(str, "disable"))
+ no_load = 1;
+ return 0;
+}
+early_param("intel_pstate", intel_pstate_setup);
+
+MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>");
+MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
new file mode 100644
index 0000000..0e83e3c
--- /dev/null
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -0,0 +1,259 @@
+/*
+ * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
+ *
+ * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#define CPU_SW_INT_BLK BIT(28)
+
+static struct priv
+{
+ struct clk *cpu_clk;
+ struct clk *ddr_clk;
+ struct clk *powersave_clk;
+ struct device *dev;
+ void __iomem *base;
+} priv;
+
+#define STATE_CPU_FREQ 0x01
+#define STATE_DDR_FREQ 0x02
+
+/*
+ * Kirkwood can swap the clock to the CPU between two clocks:
+ *
+ * - cpu clk
+ * - ddr clk
+ *
+ * The frequencies are set at runtime before registering this *
+ * table.
+ */
+static struct cpufreq_frequency_table kirkwood_freq_table[] = {
+ {STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
+ {STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
+ {0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
+{
+ if (__clk_is_enabled(priv.powersave_clk))
+ return kirkwood_freq_table[1].frequency;
+ return kirkwood_freq_table[0].frequency;
+}
+
+static void kirkwood_cpufreq_set_cpu_state(unsigned int index)
+{
+ struct cpufreq_freqs freqs;
+ unsigned int state = kirkwood_freq_table[index].index;
+ unsigned long reg;
+
+ freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
+ freqs.new = kirkwood_freq_table[index].frequency;
+ freqs.cpu = 0; /* Kirkwood is UP */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
+ kirkwood_freq_table[index].frequency);
+ dev_dbg(priv.dev, "old frequency was %i KHz\n",
+ kirkwood_cpufreq_get_cpu_frequency(0));
+
+ if (freqs.old != freqs.new) {
+ local_irq_disable();
+
+ /* Disable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg |= CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
+
+ switch (state) {
+ case STATE_CPU_FREQ:
+ clk_disable(priv.powersave_clk);
+ break;
+ case STATE_DDR_FREQ:
+ clk_enable(priv.powersave_clk);
+ break;
+ }
+
+ /* Wait-for-Interrupt, while the hardware changes frequency */
+ cpu_do_idle();
+
+ /* Enable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg &= ~CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
+
+ local_irq_enable();
+ }
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int kirkwood_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, kirkwood_freq_table);
+}
+
+static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int index = 0;
+
+ if (cpufreq_frequency_table_target(policy, kirkwood_freq_table,
+ target_freq, relation, &index))
+ return -EINVAL;
+
+ kirkwood_cpufreq_set_cpu_state(index);
+
+ return 0;
+}
+
+/* Module init and exit code */
+static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+
+ /* cpuinfo and default policy values */
+ policy->cpuinfo.transition_latency = 5000; /* 5uS */
+ policy->cur = kirkwood_cpufreq_get_cpu_frequency(0);
+
+ result = cpufreq_frequency_table_cpuinfo(policy, kirkwood_freq_table);
+ if (result)
+ return result;
+
+ cpufreq_frequency_table_get_attr(kirkwood_freq_table, policy->cpu);
+
+ return 0;
+}
+
+static int kirkwood_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *kirkwood_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver kirkwood_cpufreq_driver = {
+ .get = kirkwood_cpufreq_get_cpu_frequency,
+ .verify = kirkwood_cpufreq_verify,
+ .target = kirkwood_cpufreq_target,
+ .init = kirkwood_cpufreq_cpu_init,
+ .exit = kirkwood_cpufreq_cpu_exit,
+ .name = "kirkwood-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = kirkwood_cpufreq_attr,
+};
+
+static int kirkwood_cpufreq_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct resource *res;
+ int err;
+
+ priv.dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Cannot get memory resource\n");
+ return -ENODEV;
+ }
+ priv.base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!priv.base) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np)
+ return -ENODEV;
+
+ priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
+ if (IS_ERR(priv.cpu_clk)) {
+ dev_err(priv.dev, "Unable to get cpuclk");
+ return PTR_ERR(priv.cpu_clk);
+ }
+
+ clk_prepare_enable(priv.cpu_clk);
+ kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
+
+ priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
+ if (IS_ERR(priv.ddr_clk)) {
+ dev_err(priv.dev, "Unable to get ddrclk");
+ err = PTR_ERR(priv.ddr_clk);
+ goto out_cpu;
+ }
+
+ clk_prepare_enable(priv.ddr_clk);
+ kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
+
+ priv.powersave_clk = of_clk_get_by_name(np, "powersave");
+ if (IS_ERR(priv.powersave_clk)) {
+ dev_err(priv.dev, "Unable to get powersave");
+ err = PTR_ERR(priv.powersave_clk);
+ goto out_ddr;
+ }
+ clk_prepare(priv.powersave_clk);
+
+ of_node_put(np);
+ np = NULL;
+
+ err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
+ if (!err)
+ return 0;
+
+ dev_err(priv.dev, "Failed to register cpufreq driver");
+
+ clk_disable_unprepare(priv.powersave_clk);
+out_ddr:
+ clk_disable_unprepare(priv.ddr_clk);
+out_cpu:
+ clk_disable_unprepare(priv.cpu_clk);
+ of_node_put(np);
+
+ return err;
+}
+
+static int kirkwood_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
+
+ clk_disable_unprepare(priv.powersave_clk);
+ clk_disable_unprepare(priv.ddr_clk);
+ clk_disable_unprepare(priv.cpu_clk);
+
+ return 0;
+}
+
+static struct platform_driver kirkwood_cpufreq_platform_driver = {
+ .probe = kirkwood_cpufreq_probe,
+ .remove = kirkwood_cpufreq_remove,
+ .driver = {
+ .name = "kirkwood-cpufreq",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(kirkwood_cpufreq_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
+MODULE_ALIAS("platform:kirkwood-cpufreq");
diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c
index 89b178a..d4c4989 100644
--- a/drivers/cpufreq/maple-cpufreq.c
+++ b/drivers/cpufreq/maple-cpufreq.c
@@ -181,7 +181,7 @@
/* secondary CPUs are tied to the primary one by the
* cpufreq core if in the secondary policy we tell it that
* it actually must be one policy together with all others. */
- cpumask_copy(policy->cpus, cpu_online_mask);
+ cpumask_setall(policy->cpus);
cpufreq_frequency_table_get_attr(maple_cpu_freqs, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy,
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 97102b0..9128c07 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -214,10 +214,8 @@
* interface to handle this scenario. Additional is_smp() check
* is to keep SMP_ON_UP build working.
*/
- if (is_smp()) {
- policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
+ if (is_smp())
cpumask_setall(policy->cpus);
- }
/* FIXME: what's the actual transition time? */
policy->cpuinfo.transition_latency = 300 * 1000;
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 056faf6..d13a136 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1249,39 +1249,59 @@
.attr = powernow_k8_attr,
};
+static void __request_acpi_cpufreq(void)
+{
+ const char *cur_drv, *drv = "acpi-cpufreq";
+
+ cur_drv = cpufreq_get_current_driver();
+ if (!cur_drv)
+ goto request;
+
+ if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv))))
+ pr_warn(PFX "WTF driver: %s\n", cur_drv);
+
+ return;
+
+ request:
+ pr_warn(PFX "This CPU is not supported anymore, using acpi-cpufreq instead.\n");
+ request_module(drv);
+}
+
/* driver entry point for init */
static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0;
- int rv;
+ int ret;
if (static_cpu_has(X86_FEATURE_HW_PSTATE)) {
- pr_warn(PFX "this CPU is not supported anymore, using acpi-cpufreq instead.\n");
- request_module("acpi-cpufreq");
+ __request_acpi_cpufreq();
return -ENODEV;
}
if (!x86_match_cpu(powernow_k8_ids))
return -ENODEV;
+ get_online_cpus();
for_each_online_cpu(i) {
- int rc;
- smp_call_function_single(i, check_supported_cpu, &rc, 1);
- if (rc == 0)
+ smp_call_function_single(i, check_supported_cpu, &ret, 1);
+ if (!ret)
supported_cpus++;
}
- if (supported_cpus != num_online_cpus())
+ if (supported_cpus != num_online_cpus()) {
+ put_online_cpus();
return -ENODEV;
+ }
+ put_online_cpus();
- rv = cpufreq_register_driver(&cpufreq_amd64_driver);
+ ret = cpufreq_register_driver(&cpufreq_amd64_driver);
+ if (ret)
+ return ret;
- if (!rv)
- pr_info(PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
- num_online_nodes(), boot_cpu_data.x86_model_id,
- supported_cpus);
+ pr_info(PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
+ num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
- return rv;
+ return ret;
}
/* driver entry point for term */
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
index 4575cfe..7e4d773 100644
--- a/drivers/cpufreq/spear-cpufreq.c
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -30,7 +30,7 @@
u32 cnt;
} spear_cpufreq;
-int spear_cpufreq_verify(struct cpufreq_policy *policy)
+static int spear_cpufreq_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl);
}
@@ -157,7 +157,9 @@
freqs.new = newfreq / 1000;
freqs.new /= mult;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
if (mult == 2)
ret = spear1340_set_cpu_rate(srcclk, newfreq);
@@ -170,7 +172,8 @@
freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
}
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
}
@@ -188,8 +191,7 @@
policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency;
policy->cur = spear_cpufreq_get(0);
- cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
- cpumask_copy(policy->related_cpus, policy->cpus);
+ cpumask_setall(policy->cpus);
return 0;
}
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index e1f6860..eba6929 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -144,7 +144,6 @@
return 0;
}
- trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle_rcuidle(next_state, dev->cpu);
if (cpuidle_state_is_coupled(dev, drv, next_state))
@@ -153,7 +152,6 @@
else
entered_state = cpuidle_enter_state(dev, drv, next_state);
- trace_power_end_rcuidle(dev->cpu);
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
/* give the governor an opportunity to reflect on the outcome */
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ad8bf2a..910b011 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -31,7 +31,7 @@
*
*FIXME: Produce a better mapping/linearisation.
*/
-struct scrubrate {
+static const struct scrubrate {
u32 scrubval; /* bit pattern for scrub rate */
u32 bandwidth; /* bandwidth consumed (bytes/sec) */
} scrubrates[] = {
@@ -239,7 +239,7 @@
* DRAM base/limit associated with node_id
*/
static bool amd64_base_limit_match(struct amd64_pvt *pvt, u64 sys_addr,
- unsigned nid)
+ u8 nid)
{
u64 addr;
@@ -265,7 +265,7 @@
u64 sys_addr)
{
struct amd64_pvt *pvt;
- unsigned node_id;
+ u8 node_id;
u32 intlv_en, bits;
/*
@@ -602,111 +602,6 @@
return input_addr;
}
-
-/*
- * @input_addr is an InputAddr associated with the node represented by mci.
- * Translate @input_addr to a DramAddr and return the result.
- */
-static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
-{
- struct amd64_pvt *pvt;
- unsigned node_id, intlv_shift;
- u64 bits, dram_addr;
- u32 intlv_sel;
-
- /*
- * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
- * shows how to translate a DramAddr to an InputAddr. Here we reverse
- * this procedure. When translating from a DramAddr to an InputAddr, the
- * bits used for node interleaving are discarded. Here we recover these
- * bits from the IntlvSel field of the DRAM Limit register (section
- * 3.4.4.2) for the node that input_addr is associated with.
- */
- pvt = mci->pvt_info;
- node_id = pvt->mc_node_id;
-
- BUG_ON(node_id > 7);
-
- intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
- if (intlv_shift == 0) {
- edac_dbg(1, " InputAddr 0x%lx translates to DramAddr of same value\n",
- (unsigned long)input_addr);
-
- return input_addr;
- }
-
- bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) +
- (input_addr & 0xfff);
-
- intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1);
- dram_addr = bits + (intlv_sel << 12);
-
- edac_dbg(1, "InputAddr 0x%lx translates to DramAddr 0x%lx (%d node interleave bits)\n",
- (unsigned long)input_addr,
- (unsigned long)dram_addr, intlv_shift);
-
- return dram_addr;
-}
-
-/*
- * @dram_addr is a DramAddr that maps to the node represented by mci. Convert
- * @dram_addr to a SysAddr.
- */
-static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
-{
- struct amd64_pvt *pvt = mci->pvt_info;
- u64 hole_base, hole_offset, hole_size, base, sys_addr;
- int ret = 0;
-
- ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
- &hole_size);
- if (!ret) {
- if ((dram_addr >= hole_base) &&
- (dram_addr < (hole_base + hole_size))) {
- sys_addr = dram_addr + hole_offset;
-
- edac_dbg(1, "using DHAR to translate DramAddr 0x%lx to SysAddr 0x%lx\n",
- (unsigned long)dram_addr,
- (unsigned long)sys_addr);
-
- return sys_addr;
- }
- }
-
- base = get_dram_base(pvt, pvt->mc_node_id);
- sys_addr = dram_addr + base;
-
- /*
- * The sys_addr we have computed up to this point is a 40-bit value
- * because the k8 deals with 40-bit values. However, the value we are
- * supposed to return is a full 64-bit physical address. The AMD
- * x86-64 architecture specifies that the most significant implemented
- * address bit through bit 63 of a physical address must be either all
- * 0s or all 1s. Therefore we sign-extend the 40-bit sys_addr to a
- * 64-bit value below. See section 3.4.2 of AMD publication 24592:
- * AMD x86-64 Architecture Programmer's Manual Volume 1 Application
- * Programming.
- */
- sys_addr |= ~((sys_addr & (1ull << 39)) - 1);
-
- edac_dbg(1, " Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n",
- pvt->mc_node_id, (unsigned long)dram_addr,
- (unsigned long)sys_addr);
-
- return sys_addr;
-}
-
-/*
- * @input_addr is an InputAddr associated with the node given by mci. Translate
- * @input_addr to a SysAddr.
- */
-static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci,
- u64 input_addr)
-{
- return dram_addr_to_sys_addr(mci,
- input_addr_to_dram_addr(mci, input_addr));
-}
-
/* Map the Error address to a PAGE and PAGE OFFSET. */
static inline void error_address_to_page_and_offset(u64 error_address,
struct err_info *err)
@@ -939,7 +834,8 @@
struct amd64_pvt *pvt;
u64 cc6_base, tmp_addr;
u32 tmp;
- u8 mce_nid, intlv_en;
+ u16 mce_nid;
+ u8 intlv_en;
if ((addr & GENMASK(24, 47)) >> 24 != 0x00fdf7)
return addr;
@@ -979,10 +875,29 @@
return addr;
}
+static struct pci_dev *pci_get_related_function(unsigned int vendor,
+ unsigned int device,
+ struct pci_dev *related)
+{
+ struct pci_dev *dev = NULL;
+
+ while ((dev = pci_get_device(vendor, device, dev))) {
+ if (pci_domain_nr(dev->bus) == pci_domain_nr(related->bus) &&
+ (dev->bus->number == related->bus->number) &&
+ (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn)))
+ break;
+ }
+
+ return dev;
+}
+
static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{
+ struct amd_northbridge *nb;
+ struct pci_dev *misc, *f1 = NULL;
struct cpuinfo_x86 *c = &boot_cpu_data;
int off = range << 3;
+ u32 llim;
amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo);
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
@@ -996,30 +911,32 @@
amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi);
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
- /* Factor in CC6 save area by reading dst node's limit reg */
- if (c->x86 == 0x15) {
- struct pci_dev *f1 = NULL;
- u8 nid = dram_dst_node(pvt, range);
- u32 llim;
+ /* F15h: factor in CC6 save area by reading dst node's limit reg */
+ if (c->x86 != 0x15)
+ return;
- f1 = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0x18 + nid, 1));
- if (WARN_ON(!f1))
- return;
+ nb = node_to_amd_nb(dram_dst_node(pvt, range));
+ if (WARN_ON(!nb))
+ return;
- amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim);
+ misc = nb->misc;
+ f1 = pci_get_related_function(misc->vendor, PCI_DEVICE_ID_AMD_15H_NB_F1, misc);
+ if (WARN_ON(!f1))
+ return;
- pvt->ranges[range].lim.lo &= GENMASK(0, 15);
+ amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim);
- /* {[39:27],111b} */
- pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16;
+ pvt->ranges[range].lim.lo &= GENMASK(0, 15);
- pvt->ranges[range].lim.hi &= GENMASK(0, 7);
+ /* {[39:27],111b} */
+ pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16;
- /* [47:40] */
- pvt->ranges[range].lim.hi |= llim >> 13;
+ pvt->ranges[range].lim.hi &= GENMASK(0, 7);
- pci_dev_put(f1);
- }
+ /* [47:40] */
+ pvt->ranges[range].lim.hi |= llim >> 13;
+
+ pci_dev_put(f1);
}
static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
@@ -1305,7 +1222,7 @@
}
/* Convert the sys_addr to the normalized DCT address */
-static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, unsigned range,
+static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, u8 range,
u64 sys_addr, bool hi_rng,
u32 dct_sel_base_addr)
{
@@ -1381,7 +1298,7 @@
* -EINVAL: NOT FOUND
* 0..csrow = Chip-Select Row
*/
-static int f1x_lookup_addr_in_dct(u64 in_addr, u32 nid, u8 dct)
+static int f1x_lookup_addr_in_dct(u64 in_addr, u8 nid, u8 dct)
{
struct mem_ctl_info *mci;
struct amd64_pvt *pvt;
@@ -1672,23 +1589,6 @@
},
};
-static struct pci_dev *pci_get_related_function(unsigned int vendor,
- unsigned int device,
- struct pci_dev *related)
-{
- struct pci_dev *dev = NULL;
-
- dev = pci_get_device(vendor, device, dev);
- while (dev) {
- if ((dev->bus->number == related->bus->number) &&
- (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn)))
- break;
- dev = pci_get_device(vendor, device, dev);
- }
-
- return dev;
-}
-
/*
* These are tables of eigenvectors (one per line) which can be used for the
* construction of the syndrome tables. The modified syndrome search algorithm
@@ -1696,7 +1596,7 @@
*
* Algorithm courtesy of Ross LaFetra from AMD.
*/
-static u16 x4_vectors[] = {
+static const u16 x4_vectors[] = {
0x2f57, 0x1afe, 0x66cc, 0xdd88,
0x11eb, 0x3396, 0x7f4c, 0xeac8,
0x0001, 0x0002, 0x0004, 0x0008,
@@ -1735,7 +1635,7 @@
0x19a9, 0x2efe, 0xb5cc, 0x6f88,
};
-static u16 x8_vectors[] = {
+static const u16 x8_vectors[] = {
0x0145, 0x028a, 0x2374, 0x43c8, 0xa1f0, 0x0520, 0x0a40, 0x1480,
0x0211, 0x0422, 0x0844, 0x1088, 0x01b0, 0x44e0, 0x23c0, 0xed80,
0x1011, 0x0116, 0x022c, 0x0458, 0x08b0, 0x8c60, 0x2740, 0x4e80,
@@ -1757,7 +1657,7 @@
0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000,
};
-static int decode_syndrome(u16 syndrome, u16 *vectors, unsigned num_vecs,
+static int decode_syndrome(u16 syndrome, const u16 *vectors, unsigned num_vecs,
unsigned v_dim)
{
unsigned int i, err_sym;
@@ -2181,7 +2081,7 @@
}
/* get all cores on this DCT */
-static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, unsigned nid)
+static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, u16 nid)
{
int cpu;
@@ -2191,7 +2091,7 @@
}
/* check MCG_CTL on all the cpus on this node */
-static bool amd64_nb_mce_bank_enabled_on_node(unsigned nid)
+static bool amd64_nb_mce_bank_enabled_on_node(u16 nid)
{
cpumask_var_t mask;
int cpu, nbe;
@@ -2224,7 +2124,7 @@
return ret;
}
-static int toggle_ecc_err_reporting(struct ecc_settings *s, u8 nid, bool on)
+static int toggle_ecc_err_reporting(struct ecc_settings *s, u16 nid, bool on)
{
cpumask_var_t cmask;
int cpu;
@@ -2262,7 +2162,7 @@
return 0;
}
-static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+static bool enable_ecc_error_reporting(struct ecc_settings *s, u16 nid,
struct pci_dev *F3)
{
bool ret = true;
@@ -2314,7 +2214,7 @@
return ret;
}
-static void restore_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid,
struct pci_dev *F3)
{
u32 value, mask = 0x3; /* UECC/CECC enable */
@@ -2353,7 +2253,7 @@
"'ecc_enable_override'.\n"
" (Note that use of the override may cause unknown side effects.)\n";
-static bool ecc_enabled(struct pci_dev *F3, u8 nid)
+static bool ecc_enabled(struct pci_dev *F3, u16 nid)
{
u32 value;
u8 ecc_en = 0;
@@ -2474,7 +2374,7 @@
struct mem_ctl_info *mci = NULL;
struct edac_mc_layer layers[2];
int err = 0, ret;
- u8 nid = get_node_id(F2);
+ u16 nid = amd_get_node_id(F2);
ret = -ENOMEM;
pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
@@ -2566,7 +2466,7 @@
static int amd64_probe_one_instance(struct pci_dev *pdev,
const struct pci_device_id *mc_type)
{
- u8 nid = get_node_id(pdev);
+ u16 nid = amd_get_node_id(pdev);
struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
struct ecc_settings *s;
int ret = 0;
@@ -2616,7 +2516,7 @@
{
struct mem_ctl_info *mci;
struct amd64_pvt *pvt;
- u8 nid = get_node_id(pdev);
+ u16 nid = amd_get_node_id(pdev);
struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
struct ecc_settings *s = ecc_stngs[nid];
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index e864f40..35637d8 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -292,12 +292,6 @@
/* MSRs */
#define MSR_MCGCTL_NBE BIT(4)
-/* AMD sets the first MC device at device ID 0x18. */
-static inline u8 get_node_id(struct pci_dev *pdev)
-{
- return PCI_SLOT(pdev->devfn) - 0x18;
-}
-
enum amd_families {
K8_CPUS = 0,
F10_CPUS,
@@ -340,7 +334,7 @@
/* pci_device handles which we utilize */
struct pci_dev *F1, *F2, *F3;
- unsigned mc_node_id; /* MC index of this MC node */
+ u16 mc_node_id; /* MC index of this MC node */
int ext_model; /* extended model value of this node */
int channel_count;
@@ -393,7 +387,7 @@
u32 offset;
};
-static inline u64 get_dram_base(struct amd64_pvt *pvt, unsigned i)
+static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
{
u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
@@ -403,7 +397,7 @@
return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
}
-static inline u64 get_dram_limit(struct amd64_pvt *pvt, unsigned i)
+static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
{
u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index ad63757..f3f0c93 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -39,30 +39,28 @@
*/
/* transaction type */
-const char * const tt_msgs[] = { "INSN", "DATA", "GEN", "RESV" };
-EXPORT_SYMBOL_GPL(tt_msgs);
+static const char * const tt_msgs[] = { "INSN", "DATA", "GEN", "RESV" };
/* cache level */
-const char * const ll_msgs[] = { "RESV", "L1", "L2", "L3/GEN" };
-EXPORT_SYMBOL_GPL(ll_msgs);
+static const char * const ll_msgs[] = { "RESV", "L1", "L2", "L3/GEN" };
/* memory transaction type */
-const char * const rrrr_msgs[] = {
+static const char * const rrrr_msgs[] = {
"GEN", "RD", "WR", "DRD", "DWR", "IRD", "PRF", "EV", "SNP"
};
-EXPORT_SYMBOL_GPL(rrrr_msgs);
/* participating processor */
const char * const pp_msgs[] = { "SRC", "RES", "OBS", "GEN" };
EXPORT_SYMBOL_GPL(pp_msgs);
/* request timeout */
-const char * const to_msgs[] = { "no timeout", "timed out" };
-EXPORT_SYMBOL_GPL(to_msgs);
+static const char * const to_msgs[] = { "no timeout", "timed out" };
/* memory or i/o */
-const char * const ii_msgs[] = { "MEM", "RESV", "IO", "GEN" };
-EXPORT_SYMBOL_GPL(ii_msgs);
+static const char * const ii_msgs[] = { "MEM", "RESV", "IO", "GEN" };
+
+/* internal error type */
+static const char * const uu_msgs[] = { "RESV", "RESV", "HWA", "RESV" };
static const char * const f15h_mc1_mce_desc[] = {
"UC during a demand linefill from L2",
@@ -176,7 +174,7 @@
return f10h_mc0_mce(ec, xec);
}
-static bool f14h_mc0_mce(u16 ec, u8 xec)
+static bool cat_mc0_mce(u16 ec, u8 xec)
{
u8 r4 = R4(ec);
bool ret = true;
@@ -330,22 +328,28 @@
return ret;
}
-static bool f14h_mc1_mce(u16 ec, u8 xec)
+static bool cat_mc1_mce(u16 ec, u8 xec)
{
u8 r4 = R4(ec);
bool ret = true;
- if (MEM_ERROR(ec)) {
- if (TT(ec) != 0 || LL(ec) != 1)
- ret = false;
+ if (!MEM_ERROR(ec))
+ return false;
- if (r4 == R4_IRD)
- pr_cont("Data/tag array parity error for a tag hit.\n");
- else if (r4 == R4_SNOOP)
- pr_cont("Tag error during snoop/victimization.\n");
- else
- ret = false;
- }
+ if (TT(ec) != TT_INSTR)
+ return false;
+
+ if (r4 == R4_IRD)
+ pr_cont("Data/tag array parity error for a tag hit.\n");
+ else if (r4 == R4_SNOOP)
+ pr_cont("Tag error during snoop/victimization.\n");
+ else if (xec == 0x0)
+ pr_cont("Tag parity error from victim castout.\n");
+ else if (xec == 0x2)
+ pr_cont("Microcode patch RAM parity error.\n");
+ else
+ ret = false;
+
return ret;
}
@@ -399,12 +403,9 @@
pr_emerg(HW_ERR "Corrupted MC1 MCE info?\n");
}
-static void decode_mc2_mce(struct mce *m)
+static bool k8_mc2_mce(u16 ec, u8 xec)
{
- u16 ec = EC(m->status);
- u8 xec = XEC(m->status, xec_mask);
-
- pr_emerg(HW_ERR "MC2 Error");
+ bool ret = true;
if (xec == 0x1)
pr_cont(" in the write data buffers.\n");
@@ -429,24 +430,18 @@
pr_cont(": %s parity/ECC error during data "
"access from L2.\n", R4_MSG(ec));
else
- goto wrong_mc2_mce;
+ ret = false;
} else
- goto wrong_mc2_mce;
+ ret = false;
} else
- goto wrong_mc2_mce;
+ ret = false;
- return;
-
- wrong_mc2_mce:
- pr_emerg(HW_ERR "Corrupted MC2 MCE info?\n");
+ return ret;
}
-static void decode_f15_mc2_mce(struct mce *m)
+static bool f15h_mc2_mce(u16 ec, u8 xec)
{
- u16 ec = EC(m->status);
- u8 xec = XEC(m->status, xec_mask);
-
- pr_emerg(HW_ERR "MC2 Error: ");
+ bool ret = true;
if (TLB_ERROR(ec)) {
if (xec == 0x0)
@@ -454,10 +449,10 @@
else if (xec == 0x1)
pr_cont("Poison data provided for TLB fill.\n");
else
- goto wrong_f15_mc2_mce;
+ ret = false;
} else if (BUS_ERROR(ec)) {
if (xec > 2)
- goto wrong_f15_mc2_mce;
+ ret = false;
pr_cont("Error during attempted NB data read.\n");
} else if (MEM_ERROR(ec)) {
@@ -471,14 +466,63 @@
break;
default:
- goto wrong_f15_mc2_mce;
+ ret = false;
}
}
- return;
+ return ret;
+}
- wrong_f15_mc2_mce:
- pr_emerg(HW_ERR "Corrupted MC2 MCE info?\n");
+static bool f16h_mc2_mce(u16 ec, u8 xec)
+{
+ u8 r4 = R4(ec);
+
+ if (!MEM_ERROR(ec))
+ return false;
+
+ switch (xec) {
+ case 0x04 ... 0x05:
+ pr_cont("%cBUFF parity error.\n", (r4 == R4_RD) ? 'I' : 'O');
+ break;
+
+ case 0x09 ... 0x0b:
+ case 0x0d ... 0x0f:
+ pr_cont("ECC error in L2 tag (%s).\n",
+ ((r4 == R4_GEN) ? "BankReq" :
+ ((r4 == R4_SNOOP) ? "Prb" : "Fill")));
+ break;
+
+ case 0x10 ... 0x19:
+ case 0x1b:
+ pr_cont("ECC error in L2 data array (%s).\n",
+ (((r4 == R4_RD) && !(xec & 0x3)) ? "Hit" :
+ ((r4 == R4_GEN) ? "Attr" :
+ ((r4 == R4_EVICT) ? "Vict" : "Fill"))));
+ break;
+
+ case 0x1c ... 0x1d:
+ case 0x1f:
+ pr_cont("Parity error in L2 attribute bits (%s).\n",
+ ((r4 == R4_RD) ? "Hit" :
+ ((r4 == R4_GEN) ? "Attr" : "Fill")));
+ break;
+
+ default:
+ return false;
+ }
+
+ return true;
+}
+
+static void decode_mc2_mce(struct mce *m)
+{
+ u16 ec = EC(m->status);
+ u8 xec = XEC(m->status, xec_mask);
+
+ pr_emerg(HW_ERR "MC2 Error: ");
+
+ if (!fam_ops->mc2_mce(ec, xec))
+ pr_cont(HW_ERR "Corrupted MC2 MCE info?\n");
}
static void decode_mc3_mce(struct mce *m)
@@ -547,7 +591,7 @@
return;
case 0x19:
- if (boot_cpu_data.x86 == 0x15)
+ if (boot_cpu_data.x86 == 0x15 || boot_cpu_data.x86 == 0x16)
pr_cont("Compute Unit Data Error.\n");
else
goto wrong_mc4_mce;
@@ -633,6 +677,10 @@
static inline void amd_decode_err_code(u16 ec)
{
+ if (INT_ERROR(ec)) {
+ pr_emerg(HW_ERR "internal: %s\n", UU_MSG(ec));
+ return;
+ }
pr_emerg(HW_ERR "cache level: %s", LL_MSG(ec));
@@ -702,10 +750,7 @@
break;
case 2:
- if (c->x86 == 0x15)
- decode_f15_mc2_mce(m);
- else
- decode_mc2_mce(m);
+ decode_mc2_mce(m);
break;
case 3:
@@ -740,7 +785,7 @@
((m->status & MCI_STATUS_PCC) ? "PCC" : "-"),
((m->status & MCI_STATUS_ADDRV) ? "AddrV" : "-"));
- if (c->x86 == 0x15)
+ if (c->x86 == 0x15 || c->x86 == 0x16)
pr_cont("|%s|%s",
((m->status & MCI_STATUS_DEFERRED) ? "Deferred" : "-"),
((m->status & MCI_STATUS_POISON) ? "Poison" : "-"));
@@ -772,7 +817,7 @@
if (c->x86_vendor != X86_VENDOR_AMD)
return 0;
- if (c->x86 < 0xf || c->x86 > 0x15)
+ if (c->x86 < 0xf || c->x86 > 0x16)
return 0;
fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
@@ -783,33 +828,46 @@
case 0xf:
fam_ops->mc0_mce = k8_mc0_mce;
fam_ops->mc1_mce = k8_mc1_mce;
+ fam_ops->mc2_mce = k8_mc2_mce;
break;
case 0x10:
fam_ops->mc0_mce = f10h_mc0_mce;
fam_ops->mc1_mce = k8_mc1_mce;
+ fam_ops->mc2_mce = k8_mc2_mce;
break;
case 0x11:
fam_ops->mc0_mce = k8_mc0_mce;
fam_ops->mc1_mce = k8_mc1_mce;
+ fam_ops->mc2_mce = k8_mc2_mce;
break;
case 0x12:
fam_ops->mc0_mce = f12h_mc0_mce;
fam_ops->mc1_mce = k8_mc1_mce;
+ fam_ops->mc2_mce = k8_mc2_mce;
break;
case 0x14:
nb_err_cpumask = 0x3;
- fam_ops->mc0_mce = f14h_mc0_mce;
- fam_ops->mc1_mce = f14h_mc1_mce;
+ fam_ops->mc0_mce = cat_mc0_mce;
+ fam_ops->mc1_mce = cat_mc1_mce;
+ fam_ops->mc2_mce = k8_mc2_mce;
break;
case 0x15:
xec_mask = 0x1f;
fam_ops->mc0_mce = f15h_mc0_mce;
fam_ops->mc1_mce = f15h_mc1_mce;
+ fam_ops->mc2_mce = f15h_mc2_mce;
+ break;
+
+ case 0x16:
+ xec_mask = 0x1f;
+ fam_ops->mc0_mce = cat_mc0_mce;
+ fam_ops->mc1_mce = cat_mc1_mce;
+ fam_ops->mc2_mce = f16h_mc2_mce;
break;
default:
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
index 6796799..51b7e3a 100644
--- a/drivers/edac/mce_amd.h
+++ b/drivers/edac/mce_amd.h
@@ -14,6 +14,7 @@
#define TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
#define MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
#define BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
+#define INT_ERROR(x) (((x) & 0xF4FF) == 0x0400)
#define TT(x) (((x) >> 2) & 0x3)
#define TT_MSG(x) tt_msgs[TT(x)]
@@ -25,6 +26,8 @@
#define TO_MSG(x) to_msgs[TO(x)]
#define PP(x) (((x) >> 9) & 0x3)
#define PP_MSG(x) pp_msgs[PP(x)]
+#define UU(x) (((x) >> 8) & 0x3)
+#define UU_MSG(x) uu_msgs[UU(x)]
#define R4(x) (((x) >> 4) & 0xf)
#define R4_MSG(x) ((R4(x) < 9) ? rrrr_msgs[R4(x)] : "Wrong R4!")
@@ -32,6 +35,8 @@
#define MCI_STATUS_DEFERRED BIT_64(44)
#define MCI_STATUS_POISON BIT_64(43)
+extern const char * const pp_msgs[];
+
enum tt_ids {
TT_INSTR = 0,
TT_DATA,
@@ -65,19 +70,13 @@
R4_SNOOP,
};
-extern const char * const tt_msgs[];
-extern const char * const ll_msgs[];
-extern const char * const rrrr_msgs[];
-extern const char * const pp_msgs[];
-extern const char * const to_msgs[];
-extern const char * const ii_msgs[];
-
/*
* per-family decoder ops
*/
struct amd_decoder_ops {
bool (*mc0_mce)(u16, u8);
bool (*mc1_mce)(u16, u8);
+ bool (*mc2_mce)(u16, u8);
};
void amd_report_gart_errors(bool);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 42a840d..3eb32f6 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -301,7 +301,7 @@
"[EDAC] PCI err", pci);
if (res < 0) {
printk(KERN_ERR
- "%s: Unable to requiest irq %d for "
+ "%s: Unable to request irq %d for "
"MPC85xx PCI err\n", __func__, pdata->irq);
irq_dispose_mapping(pdata->irq);
res = -ENODEV;
@@ -583,7 +583,7 @@
"[EDAC] L2 err", edac_dev);
if (res < 0) {
printk(KERN_ERR
- "%s: Unable to requiest irq %d for "
+ "%s: Unable to request irq %d for "
"MPC85xx L2 err\n", __func__, pdata->irq);
irq_dispose_mapping(pdata->irq);
res = -ENODEV;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 682de75..e5116fa8 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -657,12 +657,6 @@
This driver provides support for driving the pins in output
mode only. Input mode is not supported.
-config GPIO_AB8500
- bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
- depends on AB8500_CORE && BROKEN
- help
- Select this to enable the AB8500 IC GPIO driver
-
config GPIO_TPS6586X
bool "TPS6586X GPIO"
depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c5aebd0..45a388c 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,7 +10,6 @@
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
-obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c
deleted file mode 100644
index 983ad42..0000000
--- a/drivers/gpio/gpio-ab8500.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: BIBEK BASU <bibek.basu@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/ab8500.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/gpio.h>
-
-/*
- * GPIO registers offset
- * Bank: 0x10
- */
-#define AB8500_GPIO_SEL1_REG 0x00
-#define AB8500_GPIO_SEL2_REG 0x01
-#define AB8500_GPIO_SEL3_REG 0x02
-#define AB8500_GPIO_SEL4_REG 0x03
-#define AB8500_GPIO_SEL5_REG 0x04
-#define AB8500_GPIO_SEL6_REG 0x05
-
-#define AB8500_GPIO_DIR1_REG 0x10
-#define AB8500_GPIO_DIR2_REG 0x11
-#define AB8500_GPIO_DIR3_REG 0x12
-#define AB8500_GPIO_DIR4_REG 0x13
-#define AB8500_GPIO_DIR5_REG 0x14
-#define AB8500_GPIO_DIR6_REG 0x15
-
-#define AB8500_GPIO_OUT1_REG 0x20
-#define AB8500_GPIO_OUT2_REG 0x21
-#define AB8500_GPIO_OUT3_REG 0x22
-#define AB8500_GPIO_OUT4_REG 0x23
-#define AB8500_GPIO_OUT5_REG 0x24
-#define AB8500_GPIO_OUT6_REG 0x25
-
-#define AB8500_GPIO_PUD1_REG 0x30
-#define AB8500_GPIO_PUD2_REG 0x31
-#define AB8500_GPIO_PUD3_REG 0x32
-#define AB8500_GPIO_PUD4_REG 0x33
-#define AB8500_GPIO_PUD5_REG 0x34
-#define AB8500_GPIO_PUD6_REG 0x35
-
-#define AB8500_GPIO_IN1_REG 0x40
-#define AB8500_GPIO_IN2_REG 0x41
-#define AB8500_GPIO_IN3_REG 0x42
-#define AB8500_GPIO_IN4_REG 0x43
-#define AB8500_GPIO_IN5_REG 0x44
-#define AB8500_GPIO_IN6_REG 0x45
-#define AB8500_GPIO_ALTFUN_REG 0x45
-#define ALTFUN_REG_INDEX 6
-#define AB8500_NUM_GPIO 42
-#define AB8500_NUM_VIR_GPIO_IRQ 16
-
-enum ab8500_gpio_action {
- NONE,
- STARTUP,
- SHUTDOWN,
- MASK,
- UNMASK
-};
-
-struct ab8500_gpio {
- struct gpio_chip chip;
- struct ab8500 *parent;
- struct device *dev;
- struct mutex lock;
- u32 irq_base;
- enum ab8500_gpio_action irq_action;
- u16 rising;
- u16 falling;
-};
-/**
- * to_ab8500_gpio() - get the pointer to ab8500_gpio
- * @chip: Member of the structure ab8500_gpio
- */
-static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip)
-{
- return container_of(chip, struct ab8500_gpio, chip);
-}
-
-static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
- unsigned offset, int val)
-{
- struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
- u8 pos = offset % 8;
- int ret;
-
- reg = reg + (offset / 8);
- ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev,
- AB8500_MISC, reg, 1 << pos, val << pos);
- if (ret < 0)
- dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
- return ret;
-}
-/**
- * ab8500_gpio_get() - Get the particular GPIO value
- * @chip: Gpio device
- * @offset: GPIO number to read
- */
-static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
- u8 mask = 1 << (offset % 8);
- u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8);
- int ret;
- u8 data;
- ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
- reg, &data);
- if (ret < 0) {
- dev_err(ab8500_gpio->dev, "%s read failed\n", __func__);
- return ret;
- }
- return (data & mask) >> (offset % 8);
-}
-
-static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
- int ret;
- /* Write the data */
- ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1);
- if (ret < 0)
- dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
-}
-
-static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int val)
-{
- int ret;
- /* set direction as output */
- ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
- if (ret < 0)
- return ret;
- /* disable pull down */
- ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
- if (ret < 0)
- return ret;
- /* set the output as 1 or 0 */
- return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
-
-}
-
-static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- /* set the register as input */
- return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
-}
-
-static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- /*
- * Only some GPIOs are interrupt capable, and they are
- * organized in discontiguous clusters:
- *
- * GPIO6 to GPIO13
- * GPIO24 and GPIO25
- * GPIO36 to GPIO41
- */
- static struct ab8500_gpio_irq_cluster {
- int start;
- int end;
- } clusters[] = {
- {.start = 6, .end = 13},
- {.start = 24, .end = 25},
- {.start = 36, .end = 41},
- };
- struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
- int base = ab8500_gpio->irq_base;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(clusters); i++) {
- struct ab8500_gpio_irq_cluster *cluster = &clusters[i];
-
- if (offset >= cluster->start && offset <= cluster->end)
- return base + offset - cluster->start;
-
- /* Advance by the number of gpios in this cluster */
- base += cluster->end - cluster->start + 1;
- }
-
- return -EINVAL;
-}
-
-static struct gpio_chip ab8500gpio_chip = {
- .label = "ab8500_gpio",
- .owner = THIS_MODULE,
- .direction_input = ab8500_gpio_direction_input,
- .get = ab8500_gpio_get,
- .direction_output = ab8500_gpio_direction_output,
- .set = ab8500_gpio_set,
- .to_irq = ab8500_gpio_to_irq,
-};
-
-static unsigned int irq_to_rising(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- int offset = irq - ab8500_gpio->irq_base;
- int new_irq = offset + AB8500_INT_GPIO6R
- + ab8500_gpio->parent->irq_base;
- return new_irq;
-}
-
-static unsigned int irq_to_falling(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- int offset = irq - ab8500_gpio->irq_base;
- int new_irq = offset + AB8500_INT_GPIO6F
- + ab8500_gpio->parent->irq_base;
- return new_irq;
-
-}
-
-static unsigned int rising_to_irq(unsigned int irq, void *dev)
-{
- struct ab8500_gpio *ab8500_gpio = dev;
- int offset = irq - AB8500_INT_GPIO6R
- - ab8500_gpio->parent->irq_base ;
- int new_irq = offset + ab8500_gpio->irq_base;
- return new_irq;
-}
-
-static unsigned int falling_to_irq(unsigned int irq, void *dev)
-{
- struct ab8500_gpio *ab8500_gpio = dev;
- int offset = irq - AB8500_INT_GPIO6F
- - ab8500_gpio->parent->irq_base ;
- int new_irq = offset + ab8500_gpio->irq_base;
- return new_irq;
-
-}
-
-/*
- * IRQ handler
- */
-
-static irqreturn_t handle_rising(int irq, void *dev)
-{
-
- handle_nested_irq(rising_to_irq(irq , dev));
- return IRQ_HANDLED;
-}
-
-static irqreturn_t handle_falling(int irq, void *dev)
-{
-
- handle_nested_irq(falling_to_irq(irq, dev));
- return IRQ_HANDLED;
-}
-
-static void ab8500_gpio_irq_lock(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- mutex_lock(&ab8500_gpio->lock);
-}
-
-static void ab8500_gpio_irq_sync_unlock(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- int offset = irq - ab8500_gpio->irq_base;
- bool rising = ab8500_gpio->rising & BIT(offset);
- bool falling = ab8500_gpio->falling & BIT(offset);
- int ret;
-
- switch (ab8500_gpio->irq_action) {
- case STARTUP:
- if (rising)
- ret = request_threaded_irq(irq_to_rising(irq),
- NULL, handle_rising,
- IRQF_TRIGGER_RISING,
- "ab8500-gpio-r", ab8500_gpio);
- if (falling)
- ret = request_threaded_irq(irq_to_falling(irq),
- NULL, handle_falling,
- IRQF_TRIGGER_FALLING,
- "ab8500-gpio-f", ab8500_gpio);
- break;
- case SHUTDOWN:
- if (rising)
- free_irq(irq_to_rising(irq), ab8500_gpio);
- if (falling)
- free_irq(irq_to_falling(irq), ab8500_gpio);
- break;
- case MASK:
- if (rising)
- disable_irq(irq_to_rising(irq));
- if (falling)
- disable_irq(irq_to_falling(irq));
- break;
- case UNMASK:
- if (rising)
- enable_irq(irq_to_rising(irq));
- if (falling)
- enable_irq(irq_to_falling(irq));
- break;
- case NONE:
- break;
- }
- ab8500_gpio->irq_action = NONE;
- ab8500_gpio->rising &= ~(BIT(offset));
- ab8500_gpio->falling &= ~(BIT(offset));
- mutex_unlock(&ab8500_gpio->lock);
-}
-
-
-static void ab8500_gpio_irq_mask(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- ab8500_gpio->irq_action = MASK;
-}
-
-static void ab8500_gpio_irq_unmask(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- ab8500_gpio->irq_action = UNMASK;
-}
-
-static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- int offset = irq - ab8500_gpio->irq_base;
-
- if (type == IRQ_TYPE_EDGE_BOTH) {
- ab8500_gpio->rising = BIT(offset);
- ab8500_gpio->falling = BIT(offset);
- } else if (type == IRQ_TYPE_EDGE_RISING) {
- ab8500_gpio->rising = BIT(offset);
- } else {
- ab8500_gpio->falling = BIT(offset);
- }
- return 0;
-}
-
-unsigned int ab8500_gpio_irq_startup(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- ab8500_gpio->irq_action = STARTUP;
- return 0;
-}
-
-void ab8500_gpio_irq_shutdown(unsigned int irq)
-{
- struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
- ab8500_gpio->irq_action = SHUTDOWN;
-}
-
-static struct irq_chip ab8500_gpio_irq_chip = {
- .name = "ab8500-gpio",
- .startup = ab8500_gpio_irq_startup,
- .shutdown = ab8500_gpio_irq_shutdown,
- .bus_lock = ab8500_gpio_irq_lock,
- .bus_sync_unlock = ab8500_gpio_irq_sync_unlock,
- .mask = ab8500_gpio_irq_mask,
- .unmask = ab8500_gpio_irq_unmask,
- .set_type = ab8500_gpio_irq_set_type,
-};
-
-static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio)
-{
- u32 base = ab8500_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) {
- set_irq_chip_data(irq, ab8500_gpio);
- set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip,
- handle_simple_irq);
- set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- set_irq_noprobe(irq);
-#endif
- }
-
- return 0;
-}
-
-static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio)
-{
- int base = ab8500_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) {
-#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
-#endif
- set_irq_chip_and_handler(irq, NULL, NULL);
- set_irq_chip_data(irq, NULL);
- }
-}
-
-static int ab8500_gpio_probe(struct platform_device *pdev)
-{
- struct ab8500_platform_data *ab8500_pdata =
- dev_get_platdata(pdev->dev.parent);
- struct ab8500_gpio_platform_data *pdata;
- struct ab8500_gpio *ab8500_gpio;
- int ret;
- int i;
-
- pdata = ab8500_pdata->gpio;
- if (!pdata) {
- dev_err(&pdev->dev, "gpio platform data missing\n");
- return -ENODEV;
- }
-
- ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL);
- if (ab8500_gpio == NULL) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
- ab8500_gpio->dev = &pdev->dev;
- ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent);
- ab8500_gpio->chip = ab8500gpio_chip;
- ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO;
- ab8500_gpio->chip.dev = &pdev->dev;
- ab8500_gpio->chip.base = pdata->gpio_base;
- ab8500_gpio->irq_base = pdata->irq_base;
- /* initialize the lock */
- mutex_init(&ab8500_gpio->lock);
- /*
- * AB8500 core will handle and clear the IRQ
- * configre GPIO based on config-reg value.
- * These values are for selecting the PINs as
- * GPIO or alternate function
- */
- for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) {
- ret = abx500_set_register_interruptible(ab8500_gpio->dev,
- AB8500_MISC, i,
- pdata->config_reg[i]);
- if (ret < 0)
- goto out_free;
- }
- ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
- AB8500_GPIO_ALTFUN_REG,
- pdata->config_reg[ALTFUN_REG_INDEX]);
- if (ret < 0)
- goto out_free;
-
- ret = ab8500_gpio_irq_init(ab8500_gpio);
- if (ret)
- goto out_free;
- ret = gpiochip_add(&ab8500_gpio->chip);
- if (ret) {
- dev_err(&pdev->dev, "unable to add gpiochip: %d\n",
- ret);
- goto out_rem_irq;
- }
- platform_set_drvdata(pdev, ab8500_gpio);
- return 0;
-
-out_rem_irq:
- ab8500_gpio_irq_remove(ab8500_gpio);
-out_free:
- mutex_destroy(&ab8500_gpio->lock);
- kfree(ab8500_gpio);
- return ret;
-}
-
-/*
- * ab8500_gpio_remove() - remove Ab8500-gpio driver
- * @pdev : Platform device registered
- */
-static int ab8500_gpio_remove(struct platform_device *pdev)
-{
- struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev);
- int ret;
-
- ret = gpiochip_remove(&ab8500_gpio->chip);
- if (ret < 0) {
- dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n",
- ret);
- return ret;
- }
-
- platform_set_drvdata(pdev, NULL);
- mutex_destroy(&ab8500_gpio->lock);
- kfree(ab8500_gpio);
-
- return 0;
-}
-
-static struct platform_driver ab8500_gpio_driver = {
- .driver = {
- .name = "ab8500-gpio",
- .owner = THIS_MODULE,
- },
- .probe = ab8500_gpio_probe,
- .remove = ab8500_gpio_remove,
-};
-
-static int __init ab8500_gpio_init(void)
-{
- return platform_driver_register(&ab8500_gpio_driver);
-}
-arch_initcall(ab8500_gpio_init);
-
-static void __exit ab8500_gpio_exit(void)
-{
- platform_driver_unregister(&ab8500_gpio_driver);
-}
-module_exit(ab8500_gpio_exit);
-
-MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>");
-MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO");
-MODULE_ALIAS("platform:ab8500-gpio");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index d542a14..a71a54a 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -89,41 +89,6 @@
EXPORT_SYMBOL(of_get_named_gpio_flags);
/**
- * of_gpio_named_count - Count GPIOs for a device
- * @np: device node to count GPIOs for
- * @propname: property name containing gpio specifier(s)
- *
- * The function returns the count of GPIOs specified for a node.
- *
- * Note that the empty GPIO specifiers counts too. For example,
- *
- * gpios = <0
- * &pio1 1 2
- * 0
- * &pio2 3 4>;
- *
- * defines four GPIOs (so this function will return 4), two of which
- * are not specified.
- */
-unsigned int of_gpio_named_count(struct device_node *np, const char* propname)
-{
- unsigned int cnt = 0;
-
- do {
- int ret;
-
- ret = of_parse_phandle_with_args(np, propname, "#gpio-cells",
- cnt, NULL);
- /* A hole in the gpios = <> counts anyway. */
- if (ret < 0 && ret != -EEXIST)
- break;
- } while (++cnt);
-
- return cnt;
-}
-EXPORT_SYMBOL(of_gpio_named_count);
-
-/**
* of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
* @gc: pointer to the gpio_chip structure
* @np: device node of the GPIO chip
@@ -250,7 +215,7 @@
* on the same GPIO chip.
*/
ret = gpiochip_add_pin_range(chip,
- pinctrl_dev_get_name(pctldev),
+ pinctrl_dev_get_devname(pctldev),
0, /* offset in gpiochip */
pinspec.args[0],
pinspec.args[1]);
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index b38ef6d..64630f1 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -2,7 +2,7 @@
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on X86 && ACPI && PCI
+ depends on X86 && ACPI && PCI && X86_LOCAL_APIC
help
Select this option to run Linux as a Hyper-V client operating
system.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 32f238f..89ac1cb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -180,11 +180,11 @@
will be called adm9240.
config SENSORS_ADT7410
- tristate "Analog Devices ADT7410"
+ tristate "Analog Devices ADT7410/ADT7420"
depends on I2C
help
If you say yes here you get support for the Analog Devices
- ADT7410 temperature monitoring chip.
+ ADT7410 and ADT7420 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7410.
@@ -506,7 +506,8 @@
help
If you say yes here you get support for ITE IT8705F, IT8712F,
IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
- IT8782F, and IT8783E/F sensor chips, and the SiS950 clone.
+ IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
+ SiS950 clone.
This driver can also be built as a module. If so, the module
will be called it87.
@@ -529,8 +530,8 @@
temperature sensors, which are used on many DDR3 memory modules for
mobile devices and servers. Support will include, but not be limited
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
- MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
- STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
+ MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
+ STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -854,6 +855,17 @@
This driver can also be built as a module. If so, the module
will be called max6650.
+config SENSORS_MAX6697
+ tristate "Maxim MAX6697 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for MAX6581, MAX6602, MAX6622,
+ MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
+ temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6697.
+
config SENSORS_MCP3021
tristate "Microchip MCP3021 and compatibles"
depends on I2C
@@ -1145,6 +1157,16 @@
This driver can also be build as a module. If so, the module
will be called amc6821.
+config SENSORS_INA209
+ tristate "TI / Burr Brown INA209"
+ depends on I2C
+ help
+ If you say yes here you get support for the TI / Burr Brown INA209
+ voltage / current / power monitor I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ina209.
+
config SENSORS_INA2XX
tristate "Texas Instruments INA219 and compatibles"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 5da2874..8d6d97e 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -65,6 +65,7 @@
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
+obj-$(CONFIG_SENSORS_INA209) += ina209.o
obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_JC42) += jc42.o
@@ -99,6 +100,7 @@
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
+obj-$(CONFIG_SENSORS_MAX6697) += max6697.o
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 1672e2a..6351aba 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -911,7 +911,7 @@
return res;
}
-static int acpi_power_meter_remove(struct acpi_device *device, int type)
+static int acpi_power_meter_remove(struct acpi_device *device)
{
struct acpi_power_meter_resource *resource;
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index f3a5d47..5d501ad 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -137,7 +137,7 @@
if (ret < 0)
return ret;
- temp = SENSORS_LIMIT(temp, -40000, 85000);
+ temp = clamp_val(temp, -40000, 85000);
temp = (temp + (temp < 0 ? -500 : 500)) / 1000;
mutex_lock(&data->lock);
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index fd1d1b1..71bcba8a 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -193,7 +193,7 @@
temp /= 1000;
mutex_lock(&data->update_lock);
- data->temp_max[index] = SENSORS_LIMIT(temp, -128, 127);
+ data->temp_max[index] = clamp_val(temp, -128, 127);
if (!read_only)
i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
data->temp_max[index]);
@@ -218,7 +218,7 @@
temp /= 1000;
mutex_lock(&data->update_lock);
- data->temp_min[index] = SENSORS_LIMIT(temp, -128, 127);
+ data->temp_min[index] = clamp_val(temp, -128, 127);
if (!read_only)
i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
data->temp_min[index]);
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 0f068e7..ea09046 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -197,7 +197,7 @@
};
#define NEG12_OFFSET 16000
#define SCALE(val, from, to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n, val) (SENSORS_LIMIT(SCALE(val, adm1026_scaling[n], 192),\
+#define INS_TO_REG(n, val) (clamp_val(SCALE(val, adm1026_scaling[n], 192),\
0, 255))
#define INS_FROM_REG(n, val) (SCALE(val, 192, adm1026_scaling[n]))
@@ -207,7 +207,7 @@
* 22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
*/
#define FAN_TO_REG(val, div) ((val) <= 0 ? 0xff : \
- SENSORS_LIMIT(1350000 / ((val) * (div)), \
+ clamp_val(1350000 / ((val) * (div)), \
1, 254))
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 0xff ? 0 : \
1350000 / ((val) * (div)))
@@ -215,14 +215,14 @@
#define DIV_TO_REG(val) ((val) >= 8 ? 3 : (val) >= 4 ? 2 : (val) >= 2 ? 1 : 0)
/* Temperature is reported in 1 degC increments */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) + ((val) < 0 ? -500 : 500)) \
+#define TEMP_TO_REG(val) (clamp_val(((val) + ((val) < 0 ? -500 : 500)) \
/ 1000, -127, 127))
#define TEMP_FROM_REG(val) ((val) * 1000)
-#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val) + ((val) < 0 ? -500 : 500)) \
+#define OFFSET_TO_REG(val) (clamp_val(((val) + ((val) < 0 ? -500 : 500)) \
/ 1000, -127, 127))
#define OFFSET_FROM_REG(val) ((val) * 1000)
-#define PWM_TO_REG(val) (SENSORS_LIMIT(val, 0, 255))
+#define PWM_TO_REG(val) (clamp_val(val, 0, 255))
#define PWM_FROM_REG(val) (val)
#define PWM_MIN_TO_REG(val) ((val) & 0xf0)
@@ -233,7 +233,7 @@
* indicates that the DAC could be used to drive the fans, but in our
* example board (Arima HDAMA) it isn't connected to the fans at all.
*/
-#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val) * 255) + 500) / 2500), 0, 255))
+#define DAC_TO_REG(val) (clamp_val(((((val) * 255) + 500) / 2500), 0, 255))
#define DAC_FROM_REG(val) (((val) * 2500) / 255)
/*
@@ -933,7 +933,7 @@
return;
new_min = data->fan_min[fan] * old_div / new_div;
- new_min = SENSORS_LIMIT(new_min, 1, 254);
+ new_min = clamp_val(new_min, 1, 254);
data->fan_min[fan] = new_min;
adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min);
}
@@ -1527,7 +1527,7 @@
return err;
mutex_lock(&data->update_lock);
- data->pwm1.auto_pwm_min = SENSORS_LIMIT(val, 0, 255);
+ data->pwm1.auto_pwm_min = clamp_val(val, 0, 255);
if (data->pwm1.enable == 2) { /* apply immediately */
data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index c6a4631..253ea39 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -162,13 +162,13 @@
static int FAN_TO_REG(int reg, int div)
{
int tmp;
- tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
+ tmp = FAN_FROM_REG(clamp_val(reg, 0, 65535), div);
return tmp > 255 ? 255 : tmp;
}
#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6))
-#define PWM_TO_REG(val) (SENSORS_LIMIT((val), 0, 255) >> 4)
+#define PWM_TO_REG(val) (clamp_val((val), 0, 255) >> 4)
#define PWM_FROM_REG(val) ((val) << 4)
#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7)
@@ -675,7 +675,7 @@
if (ret)
return ret;
- val = SENSORS_LIMIT(val, -15000, 15000);
+ val = clamp_val(val, -15000, 15000);
mutex_lock(&data->update_lock);
data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr),
@@ -696,7 +696,7 @@
if (ret)
return ret;
- val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
@@ -717,7 +717,7 @@
if (ret)
return ret;
- val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
@@ -738,7 +738,7 @@
if (ret)
return ret;
- val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
mutex_lock(&data->update_lock);
data->temp_crit[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index dafa477..2416628 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -98,13 +98,13 @@
static inline u8 IN_TO_REG(unsigned long val, int n)
{
- return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255);
+ return clamp_val(SCALE(val, 192, nom_mv[n]), 0, 255);
}
/* temperature range: -40..125, 127 disables temperature alarm */
static inline s8 TEMP_TO_REG(long val)
{
- return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127);
+ return clamp_val(SCALE(val, 1, 1000), -40, 127);
}
/* two fans, each with low fan speed limit */
@@ -122,7 +122,7 @@
/* analog out 0..1250mV */
static inline u8 AOUT_TO_REG(unsigned long val)
{
- return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255);
+ return clamp_val(SCALE(val, 255, 1250), 0, 255);
}
static inline unsigned int AOUT_FROM_REG(u8 reg)
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 409b5c1..ba962ac 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -163,9 +163,9 @@
/* Bound Vref with min/max values if it was provided */
if (data->vref_mv)
- data->vref_mv = SENSORS_LIMIT(data->vref_mv,
- ADS7828_EXT_VREF_MV_MIN,
- ADS7828_EXT_VREF_MV_MAX);
+ data->vref_mv = clamp_val(data->vref_mv,
+ ADS7828_EXT_VREF_MV_MIN,
+ ADS7828_EXT_VREF_MV_MAX);
else
data->vref_mv = ADS7828_INT_VREF_MV;
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 030c8d7..99a7290 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -78,10 +78,6 @@
adt7410,
};
-/* Addresses scanned */
-static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
- I2C_CLIENT_END };
-
static const u8 ADT7410_REG_TEMP[4] = {
ADT7410_TEMPERATURE, /* input */
ADT7410_T_ALARM_HIGH, /* high */
@@ -173,8 +169,8 @@
static s16 ADT7410_TEMP_TO_REG(long temp)
{
- return DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, ADT7410_TEMP_MIN,
- ADT7410_TEMP_MAX) * 128, 1000);
+ return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7410_TEMP_MIN,
+ ADT7410_TEMP_MAX) * 128, 1000);
}
static int ADT7410_REG_TO_TEMP(struct adt7410_data *data, s16 reg)
@@ -269,9 +265,9 @@
return ret;
/* convert absolute hysteresis value to a 4 bit delta value */
limit = ADT7410_REG_TO_TEMP(data, data->temp[1]);
- hyst = SENSORS_LIMIT(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX);
- data->hyst = SENSORS_LIMIT(DIV_ROUND_CLOSEST(limit - hyst, 1000),
- 0, ADT7410_T_HYST_MASK);
+ hyst = clamp_val(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX);
+ data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), 0,
+ ADT7410_T_HYST_MASK);
ret = i2c_smbus_write_byte_data(client, ADT7410_T_HYST, data->hyst);
if (ret)
return ret;
@@ -364,6 +360,7 @@
/*
* Set to 16 bit resolution, continous conversion and comparator mode.
*/
+ ret &= ~ADT7410_MODE_MASK;
data->config = ret | ADT7410_FULL | ADT7410_RESOLUTION |
ADT7410_EVENT_MODE;
if (data->config != data->oldconfig) {
@@ -410,11 +407,12 @@
static const struct i2c_device_id adt7410_ids[] = {
{ "adt7410", adt7410, },
+ { "adt7420", adt7410, },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int adt7410_suspend(struct device *dev)
{
int ret;
@@ -436,10 +434,8 @@
return ret;
}
-static const struct dev_pm_ops adt7410_dev_pm_ops = {
- .suspend = adt7410_suspend,
- .resume = adt7410_resume,
-};
+static SIMPLE_DEV_PM_OPS(adt7410_dev_pm_ops, adt7410_suspend, adt7410_resume);
+
#define ADT7410_DEV_PM_OPS (&adt7410_dev_pm_ops)
#else
#define ADT7410_DEV_PM_OPS NULL
@@ -454,11 +450,11 @@
.probe = adt7410_probe,
.remove = adt7410_remove,
.id_table = adt7410_ids,
- .address_list = normal_i2c,
+ .address_list = I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b),
};
module_i2c_driver(adt7410_driver);
MODULE_AUTHOR("Hartmut Knaack");
-MODULE_DESCRIPTION("ADT7410 driver");
+MODULE_DESCRIPTION("ADT7410/ADT7420 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 98a7d81..69481d3 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -836,7 +836,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -874,7 +874,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -939,7 +939,7 @@
temp *= 1000; /* convert mV to uV */
temp = DIV_ROUND_CLOSEST(temp, x);
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->volt_max[attr->index] = temp;
@@ -981,7 +981,7 @@
temp *= 1000; /* convert mV to uV */
temp = DIV_ROUND_CLOSEST(temp, x);
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->volt_min[attr->index] = temp;
@@ -1071,7 +1071,7 @@
temp = FAN_RPM_TO_PERIOD(temp);
temp >>= 8;
- temp = SENSORS_LIMIT(temp, 1, 255);
+ temp = clamp_val(temp, 1, 255);
mutex_lock(&data->lock);
data->fan_min[attr->index] = temp;
@@ -1149,7 +1149,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm[attr->index] = temp;
@@ -1179,7 +1179,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_max = temp;
@@ -1211,7 +1211,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_min[attr->index] = temp;
@@ -1246,7 +1246,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = SENSORS_LIMIT(temp, 0, 15);
+ temp = clamp_val(temp, 0, 15);
/* package things up */
temp &= ADT7462_PWM_HYST_MASK;
@@ -1333,7 +1333,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 39ecb1a..b83bf4b 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -452,7 +452,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 60000);
+ temp = clamp_val(temp, 0, 60000);
mutex_lock(&data->lock);
data->auto_update_interval = temp;
@@ -481,7 +481,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, -1, 10);
+ temp = clamp_val(temp, -1, 10);
mutex_lock(&data->lock);
data->num_temp_sensors = temp;
@@ -515,7 +515,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -549,7 +549,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -604,7 +604,7 @@
return -EINVAL;
temp = FAN_RPM_TO_PERIOD(temp);
- temp = SENSORS_LIMIT(temp, 1, 65534);
+ temp = clamp_val(temp, 1, 65534);
mutex_lock(&data->lock);
data->fan_max[attr->index] = temp;
@@ -641,7 +641,7 @@
return -EINVAL;
temp = FAN_RPM_TO_PERIOD(temp);
- temp = SENSORS_LIMIT(temp, 1, 65534);
+ temp = clamp_val(temp, 1, 65534);
mutex_lock(&data->lock);
data->fan_min[attr->index] = temp;
@@ -717,7 +717,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm[attr->index] = temp;
@@ -749,7 +749,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_max[attr->index] = temp;
@@ -782,7 +782,7 @@
if (kstrtol(buf, 10, &temp))
return -EINVAL;
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_min[attr->index] = temp;
@@ -826,7 +826,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = SENSORS_LIMIT(temp, 0, 255);
+ temp = clamp_val(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 989e54c..22d008b 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -201,10 +201,10 @@
u16 ret;
if (!(data->config5 & CONFIG5_TWOSCOMP)) {
- val = SENSORS_LIMIT(val, -64000, 191000);
+ val = clamp_val(val, -64000, 191000);
ret = (val + 64500) / 1000;
} else {
- val = SENSORS_LIMIT(val, -128000, 127000);
+ val = clamp_val(val, -128000, 127000);
if (val < -500)
ret = (256500 + val) / 1000;
else
@@ -240,7 +240,7 @@
if (rpm == 0)
return 0;
- return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
+ return clamp_val((90000 * 60) / rpm, 1, 0xFFFF);
}
/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
@@ -271,7 +271,7 @@
reg = (volt * 1024) / 2250;
else
reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
- return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
+ return clamp_val(reg, 0, 1023) & (0xff << 2);
}
static u16 adt7475_read_word(struct i2c_client *client, int reg)
@@ -451,10 +451,10 @@
switch (sattr->nr) {
case OFFSET:
if (data->config5 & CONFIG5_TEMPOFFSET) {
- val = SENSORS_LIMIT(val, -63000, 127000);
+ val = clamp_val(val, -63000, 127000);
out = data->temp[OFFSET][sattr->index] = val / 1000;
} else {
- val = SENSORS_LIMIT(val, -63000, 64000);
+ val = clamp_val(val, -63000, 64000);
out = data->temp[OFFSET][sattr->index] = val / 500;
}
break;
@@ -471,7 +471,7 @@
adt7475_read_hystersis(client);
temp = reg2temp(data, data->temp[THERM][sattr->index]);
- val = SENSORS_LIMIT(val, temp - 15000, temp);
+ val = clamp_val(val, temp - 15000, temp);
val = (temp - val) / 1000;
if (sattr->index != 1) {
@@ -577,7 +577,7 @@
* to figure the range
*/
temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
- val = SENSORS_LIMIT(val, temp + autorange_table[0],
+ val = clamp_val(val, temp + autorange_table[0],
temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
val -= temp;
@@ -701,7 +701,7 @@
break;
}
- data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
+ data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
i2c_smbus_write_byte_data(client, reg,
data->pwm[sattr->nr][sattr->index]);
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index ae482e3..4fe49d2 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -241,7 +241,7 @@
int ret = kstrtol(buf, 10, &val);
if (ret)
return ret;
- val = SENSORS_LIMIT(val / 1000, -128, 127);
+ val = clamp_val(val / 1000, -128, 127);
mutex_lock(&data->update_lock);
data->temp[ix] = val;
@@ -332,7 +332,7 @@
return ret;
mutex_lock(&data->update_lock);
- data->pwm1 = SENSORS_LIMIT(val , 0, 255);
+ data->pwm1 = clamp_val(val , 0, 255);
i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
mutex_unlock(&data->update_lock);
return count;
@@ -499,11 +499,11 @@
mutex_lock(&data->update_lock);
switch (ix) {
case 0:
- ptemp[0] = SENSORS_LIMIT(val / 1000, 0,
- data->temp1_auto_point_temp[1]);
- ptemp[0] = SENSORS_LIMIT(ptemp[0], 0,
- data->temp2_auto_point_temp[1]);
- ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63);
+ ptemp[0] = clamp_val(val / 1000, 0,
+ data->temp1_auto_point_temp[1]);
+ ptemp[0] = clamp_val(ptemp[0], 0,
+ data->temp2_auto_point_temp[1]);
+ ptemp[0] = clamp_val(ptemp[0], 0, 63);
if (i2c_smbus_write_byte_data(
client,
AMC6821_REG_PSV_TEMP,
@@ -515,20 +515,12 @@
goto EXIT;
break;
case 1:
- ptemp[1] = SENSORS_LIMIT(
- val / 1000,
- (ptemp[0] & 0x7C) + 4,
- 124);
+ ptemp[1] = clamp_val(val / 1000, (ptemp[0] & 0x7C) + 4, 124);
ptemp[1] &= 0x7C;
- ptemp[2] = SENSORS_LIMIT(
- ptemp[2], ptemp[1] + 1,
- 255);
+ ptemp[2] = clamp_val(ptemp[2], ptemp[1] + 1, 255);
break;
case 2:
- ptemp[2] = SENSORS_LIMIT(
- val / 1000,
- ptemp[1]+1,
- 255);
+ ptemp[2] = clamp_val(val / 1000, ptemp[1]+1, 255);
break;
default:
dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
@@ -561,7 +553,7 @@
return ret;
mutex_lock(&data->update_lock);
- data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254);
+ data->pwm1_auto_point_pwm[1] = clamp_val(val, 0, 254);
if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
data->pwm1_auto_point_pwm[1])) {
dev_err(&client->dev, "Register write error, aborting.\n");
@@ -629,7 +621,7 @@
val = 1 > val ? 0xFFFF : 6000000/val;
mutex_lock(&data->update_lock);
- data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF);
+ data->fan[ix] = (u16) clamp_val(val, 1, 0xFFFF);
if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
data->fan[ix] & 0xFF)) {
dev_err(&client->dev, "Register write error, aborting.\n");
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 520e5bf..6ac612c 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -114,7 +114,7 @@
*/
static u8 IN_TO_REG(unsigned val)
{
- unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
+ unsigned nval = clamp_val(val, ASB100_IN_MIN, ASB100_IN_MAX);
return (nval + 8) / 16;
}
@@ -129,8 +129,8 @@
return 0;
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static int FAN_FROM_REG(u8 val, int div)
@@ -148,7 +148,7 @@
*/
static u8 TEMP_TO_REG(long temp)
{
- int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
+ int ntemp = clamp_val(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
ntemp += (ntemp < 0 ? -500 : 500);
return (u8)(ntemp / 1000);
}
@@ -164,7 +164,7 @@
*/
static u8 ASB100_PWM_TO_REG(int pwm)
{
- pwm = SENSORS_LIMIT(pwm, 0, 255);
+ pwm = clamp_val(pwm, 0, 255);
return (u8)(pwm / 16);
}
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index b867aab7..da7f5b5 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -191,7 +191,7 @@
if (kstrtol(buf, 10, &reqval))
return -EINVAL;
- reqval = SENSORS_LIMIT(reqval, 0, 255);
+ reqval = clamp_val(reqval, 0, 255);
mutex_lock(&data->update_lock);
data->reg[param->msb[0]] = reqval;
@@ -224,7 +224,7 @@
if (kstrtol(buf, 10, &reqval))
return -EINVAL;
- reqval = SENSORS_LIMIT(reqval, 0, param->mask[0]);
+ reqval = clamp_val(reqval, 0, param->mask[0]);
reqval = (reqval & param->mask[0]) << param->shift[0];
@@ -274,7 +274,7 @@
* generating an alarm.
*/
reqval =
- (reqval <= 0 ? 0xffff : SENSORS_LIMIT(5400000 / reqval, 0, 0xfffe));
+ (reqval <= 0 ? 0xffff : clamp_val(5400000 / reqval, 0, 0xfffe));
mutex_lock(&data->update_lock);
data->reg[param->msb[0]] = (reqval >> 8) & 0xff;
@@ -343,11 +343,11 @@
if (kstrtol(buf, 10, &reqval))
return -EINVAL;
- reqval = SENSORS_LIMIT(reqval, 0, 0xffff);
+ reqval = clamp_val(reqval, 0, 0xffff);
reqval = reqval * 0xc0 / asc7621_in_scaling[nr];
- reqval = SENSORS_LIMIT(reqval, 0, 0xff);
+ reqval = clamp_val(reqval, 0, 0xff);
mutex_lock(&data->update_lock);
data->reg[param->msb[0]] = reqval;
@@ -376,7 +376,7 @@
if (kstrtol(buf, 10, &reqval))
return -EINVAL;
- reqval = SENSORS_LIMIT(reqval, -127000, 127000);
+ reqval = clamp_val(reqval, -127000, 127000);
temp = reqval / 1000;
@@ -432,7 +432,7 @@
if (kstrtol(buf, 10, &reqval))
return -EINVAL;
- reqval = SENSORS_LIMIT(reqval, -32000, 31750);
+ reqval = clamp_val(reqval, -32000, 31750);
i = reqval / 1000;
f = reqval - (i * 1000);
temp = i << 2;
@@ -468,7 +468,7 @@
auto_point1 = ((s8) data->reg[param->msb[1]]) * 1000;
regval =
((data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0]);
- temp = auto_point1 + asc7621_range_map[SENSORS_LIMIT(regval, 0, 15)];
+ temp = auto_point1 + asc7621_range_map[clamp_val(regval, 0, 15)];
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", temp);
@@ -489,7 +489,7 @@
mutex_lock(&data->update_lock);
auto_point1 = data->reg[param->msb[1]] * 1000;
- reqval = SENSORS_LIMIT(reqval, auto_point1 + 2000, auto_point1 + 80000);
+ reqval = clamp_val(reqval, auto_point1 + 2000, auto_point1 + 80000);
for (i = ARRAY_SIZE(asc7621_range_map) - 1; i >= 0; i--) {
if (reqval >= auto_point1 + asc7621_range_map[i]) {
@@ -523,7 +523,7 @@
regval = config | (altbit << 3);
mutex_unlock(&data->update_lock);
- return sprintf(buf, "%u\n", map[SENSORS_LIMIT(regval, 0, 15)]);
+ return sprintf(buf, "%u\n", map[clamp_val(regval, 0, 15)]);
}
static ssize_t store_pwm_ac(struct device *dev,
@@ -663,7 +663,7 @@
u8 regval =
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
- regval = SENSORS_LIMIT(regval, 0, 15);
+ regval = clamp_val(regval, 0, 15);
return sprintf(buf, "%u\n", asc7621_pwm_freq_map[regval]);
}
@@ -711,7 +711,7 @@
u8 regval =
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
- regval = SENSORS_LIMIT(regval, 0, 7);
+ regval = clamp_val(regval, 0, 7);
return sprintf(buf, "%u\n", asc7621_pwm_auto_spinup_map[regval]);
@@ -759,7 +759,7 @@
SETUP_SHOW_data_param(dev, attr);
u8 regval =
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
- regval = SENSORS_LIMIT(regval, 0, 7);
+ regval = clamp_val(regval, 0, 7);
return sprintf(buf, "%u\n", asc7621_temp_smoothing_time_map[regval]);
}
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 56dbcfb..b25c643 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -190,7 +190,7 @@
};
static int atk_add(struct acpi_device *device);
-static int atk_remove(struct acpi_device *device, int type);
+static int atk_remove(struct acpi_device *device);
static void atk_print_sensor(struct atk_data *data, union acpi_object *obj);
static int atk_read_value(struct atk_sensor_data *sensor, u64 *value);
static void atk_free_sensors(struct atk_data *data);
@@ -1416,7 +1416,7 @@
return err;
}
-static int atk_remove(struct acpi_device *device, int type)
+static int atk_remove(struct acpi_device *device)
{
struct atk_data *data = device->driver_data;
dev_dbg(&device->dev, "removing...\n");
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index d64923d..3f1e297 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -198,7 +198,7 @@
static const struct tjmax __cpuinitconst tjmax_table[] = {
{ "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */
{ "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */
- { "CPU CE4110", 110000 }, /* Model 0x1c, stepping 10 */
+ { "CPU CE4110", 110000 }, /* Model 0x1c, stepping 10 Sodaville */
{ "CPU CE4150", 110000 }, /* Model 0x1c, stepping 10 */
{ "CPU CE4170", 110000 }, /* Model 0x1c, stepping 10 */
};
@@ -212,7 +212,7 @@
#define ANY 0xff
static const struct tjmax_model __cpuinitconst tjmax_model_table[] = {
- { 0x1c, 10, 100000 }, /* D4xx, N4xx, D5xx, N5xx */
+ { 0x1c, 10, 100000 }, /* D4xx, K4xx, N4xx, D5xx, K5xx, N5xx */
{ 0x1c, ANY, 90000 }, /* Z5xx, N2xx, possibly others
* Note: Also matches 230 and 330,
* which are covered by tjmax_table
@@ -222,6 +222,7 @@
* is undetectable by software
*/
{ 0x27, ANY, 90000 }, /* Atom Medfield (Z2460) */
+ { 0x35, ANY, 90000 }, /* Atom Clover Trail/Cloverview (Z2760) */
{ 0x36, ANY, 100000 }, /* Atom Cedar Trail/Cedarview (N2xxx, D2xxx) */
};
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 7430f70..c347c94 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -277,7 +277,7 @@
static inline int IN_TO_REG(int val, int nominal)
{
- return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255);
+ return clamp_val((val * 192 + nominal / 2) / nominal, 0, 255);
}
/*
@@ -293,8 +293,7 @@
static inline int TEMP_TO_REG(int val)
{
- return SENSORS_LIMIT((val < 0 ? val - 500 : val + 500) / 1000,
- -128, 127);
+ return clamp_val((val < 0 ? val - 500 : val + 500) / 1000, -128, 127);
}
/* Temperature range */
@@ -332,7 +331,7 @@
static inline int TEMP_HYST_TO_REG(int val, int ix, int reg)
{
- int hyst = SENSORS_LIMIT((val + 500) / 1000, 0, 15);
+ int hyst = clamp_val((val + 500) / 1000, 0, 15);
return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
}
@@ -349,10 +348,10 @@
static inline int FAN_TO_REG(int val, int tpc)
{
if (tpc) {
- return SENSORS_LIMIT(val / tpc, 0, 0xffff);
+ return clamp_val(val / tpc, 0, 0xffff);
} else {
return (val <= 0) ? 0xffff :
- SENSORS_LIMIT(90000 * 60 / val, 0, 0xfffe);
+ clamp_val(90000 * 60 / val, 0, 0xfffe);
}
}
@@ -1282,7 +1281,7 @@
mutex_lock(&data->update_lock);
switch (fn) {
case SYS_PWM:
- data->pwm[ix] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm[ix] = clamp_val(val, 0, 255);
dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]);
break;
case SYS_PWM_FREQ:
@@ -1450,7 +1449,7 @@
break;
case SYS_PWM_AUTO_POINT1_PWM:
/* Only valid for pwm[1-3] */
- data->pwm_min[ix] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm_min[ix] = clamp_val(val, 0, 255);
dme1737_write(data, DME1737_REG_PWM_MIN(ix),
data->pwm_min[ix]);
break;
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 77f434c..b073056 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -405,7 +405,7 @@
if (rpm_target == 0)
data->fan_target = 0x1fff;
else
- data->fan_target = SENSORS_LIMIT(
+ data->fan_target = clamp_val(
(FAN_RPM_FACTOR * data->fan_multiplier) / rpm_target,
0, 0x1fff);
diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c
index 789bd4f..936898f 100644
--- a/drivers/hwmon/emc6w201.c
+++ b/drivers/hwmon/emc6w201.c
@@ -220,7 +220,7 @@
: EMC6W201_REG_IN_HIGH(nr);
mutex_lock(&data->update_lock);
- data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255);
+ data->in[sf][nr] = clamp_val(val, 0, 255);
err = emc6w201_write8(client, reg, data->in[sf][nr]);
mutex_unlock(&data->update_lock);
@@ -257,7 +257,7 @@
: EMC6W201_REG_TEMP_HIGH(nr);
mutex_lock(&data->update_lock);
- data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128);
+ data->temp[sf][nr] = clamp_val(val, -127, 128);
err = emc6w201_write8(client, reg, data->temp[sf][nr]);
mutex_unlock(&data->update_lock);
@@ -298,7 +298,7 @@
val = 0xFFFF;
} else {
val = DIV_ROUND_CLOSEST(5400000U, val);
- val = SENSORS_LIMIT(val, 0, 0xFFFE);
+ val = clamp_val(val, 0, 0xFFFE);
}
mutex_lock(&data->update_lock);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index bb7275c..cfb02dd 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1350,7 +1350,7 @@
if (err)
return err;
- val = SENSORS_LIMIT(val, 23, 1500000);
+ val = clamp_val(val, 23, 1500000);
val = fan_to_reg(val);
mutex_lock(&data->update_lock);
@@ -1438,7 +1438,7 @@
return err;
val /= 8;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val);
@@ -1542,7 +1542,7 @@
return err;
val /= 1000;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val);
@@ -1589,8 +1589,7 @@
/* convert abs to relative and check */
data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr));
- val = SENSORS_LIMIT(val, data->temp_high[nr] - 15,
- data->temp_high[nr]);
+ val = clamp_val(val, data->temp_high[nr] - 15, data->temp_high[nr]);
val = data->temp_high[nr] - val;
/* convert value to register contents */
@@ -1627,7 +1626,7 @@
return err;
val /= 1000;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val);
@@ -1754,7 +1753,7 @@
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
@@ -1805,7 +1804,7 @@
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
@@ -1932,7 +1931,7 @@
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
@@ -1991,8 +1990,8 @@
mutex_lock(&data->update_lock);
data->pwm_auto_point_temp[nr][point] =
f71882fg_read8(data, F71882FG_REG_POINT_TEMP(nr, point));
- val = SENSORS_LIMIT(val, data->pwm_auto_point_temp[nr][point] - 15,
- data->pwm_auto_point_temp[nr][point]);
+ val = clamp_val(val, data->pwm_auto_point_temp[nr][point] - 15,
+ data->pwm_auto_point_temp[nr][point]);
val = data->pwm_auto_point_temp[nr][point] - val;
reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2));
@@ -2126,9 +2125,9 @@
val /= 1000;
if (data->auto_point_temp_signed)
- val = SENSORS_LIMIT(val, -128, 127);
+ val = clamp_val(val, -128, 127);
else
- val = SENSORS_LIMIT(val, 0, 127);
+ val = clamp_val(val, 0, 127);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index f7dba22..9e300e5 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -359,7 +359,7 @@
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm[nr] = clamp_val(val, 0, 255);
f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
@@ -556,7 +556,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+ val = clamp_val(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_max[nr] = val;
f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
@@ -577,7 +577,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+ val = clamp_val(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_min[nr] = val;
f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
@@ -625,7 +625,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+ val = clamp_val(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_high[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
@@ -646,7 +646,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+ val = clamp_val(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_max_hyst[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HYST(nr),
@@ -822,7 +822,7 @@
if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
!duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
continue;
- data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
+ data->pwm[nr] = clamp_val(f75375s_pdata->pwm[nr], 0, 255);
f75375_write_pwm(client, nr);
}
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 519ce8b..8af2755 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -379,7 +379,7 @@
if (err)
return err;
- v = SENSORS_LIMIT(v / 1000, -128, 127) + 128;
+ v = clamp_val(v / 1000, -128, 127) + 128;
mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(to_i2c_client(dev),
@@ -540,7 +540,7 @@
/* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
if (v || data->kind == fscsyl) {
- v = SENSORS_LIMIT(v, 128, 255);
+ v = clamp_val(v, 128, 255);
v = (v - 128) * 2 + 1;
}
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 8b2106f..ea6480b 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -171,7 +171,7 @@
return -EINVAL;
mutex_lock(&data->update_lock);
- data->set_cnt = PWM_TO_CNT(SENSORS_LIMIT(val, 0, 255));
+ data->set_cnt = PWM_TO_CNT(clamp_val(val, 0, 255));
g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 2c74673..e2e5909 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -86,7 +86,7 @@
#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
#define BOOL_TO_REG(val) ((val) ? 0 : 1)
-#define TEMP_TO_REG(val) SENSORS_LIMIT(((((val) < 0 ? \
+#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \
(val) - 500 : \
(val) + 500) / 1000) + 119), 0, 255)
#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
@@ -96,15 +96,15 @@
long rpmdiv;
if (rpm == 0)
return 0;
- rpmdiv = SENSORS_LIMIT(rpm, 1, 960000) * div;
- return SENSORS_LIMIT((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
+ rpmdiv = clamp_val(rpm, 1, 960000) * div;
+ return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
-#define IN_TO_REG(val) SENSORS_LIMIT((((val) + 9) / 19), 0, 255)
+#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255)
#define IN_FROM_REG(val) ((val) * 19)
-#define VDD_TO_REG(val) SENSORS_LIMIT((((val) * 4 + 47) / 95), 0, 255)
+#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, 255)
#define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
#define DIV_FROM_REG(val) (1 << (val))
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index a21ff25..ed56e09 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -144,10 +144,10 @@
static DEVICE_ATTR(cpu0_vid, S_IRUGO, get_cpu_vid, NULL);
#define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
-#define VDD_TO_REG(val) SENSORS_LIMIT((((val) * 4 + 47) / 95), 0, 255)
+#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, 255)
#define IN_FROM_REG(val) ((val) * 19)
-#define IN_TO_REG(val) SENSORS_LIMIT((((val) + 9) / 19), 0, 255)
+#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255)
static ssize_t get_in_input(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -285,8 +285,7 @@
#define DIV_FROM_REG(val) (1 << (val))
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div))))
#define FAN_TO_REG(val, div) ((val) <= 0 ? 0 : \
- SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, \
- 255))
+ clamp_val((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255))
static ssize_t get_fan_input(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -450,7 +449,7 @@
get_fan_off, set_fan_off);
#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
-#define TEMP_TO_REG(val) SENSORS_LIMIT(((((val) < 0 ? \
+#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \
(val) - 500 : (val) + 500) / 1000) + 130), 0, 255)
static ssize_t get_temp_input(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 4e04c12..3978194 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -422,7 +422,7 @@
/* Fill GPIO pin array */
pdata->num_ctrl = of_gpio_count(node);
- if (!pdata->num_ctrl) {
+ if (pdata->num_ctrl <= 0) {
dev_err(dev, "gpios DT property empty / missing");
return -ENODEV;
}
@@ -477,7 +477,7 @@
pdata->speed = speed;
/* Alarm GPIO if one exists */
- if (of_gpio_named_count(node, "alarm-gpios")) {
+ if (of_gpio_named_count(node, "alarm-gpios") > 0) {
struct gpio_fan_alarm *alarm;
int val;
enum of_gpio_flags flags;
diff --git a/drivers/hwmon/ina209.c b/drivers/hwmon/ina209.c
new file mode 100644
index 0000000..c6fdd5b
--- /dev/null
+++ b/drivers/hwmon/ina209.c
@@ -0,0 +1,636 @@
+/*
+ * Driver for the Texas Instruments / Burr Brown INA209
+ * Bidirectional Current/Power Monitor
+ *
+ * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * Derived from Ira W. Snyder's original driver submission
+ * Copyright (C) 2008 Paul Hays <Paul.Hays@cattail.ca>
+ * Copyright (C) 2008-2009 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * Aligned with ina2xx driver
+ * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Thanks to Jan Volkering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet:
+ * http://www.ti.com/lit/gpn/ina209
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/bug.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/platform_data/ina2xx.h>
+
+/* register definitions */
+#define INA209_CONFIGURATION 0x00
+#define INA209_STATUS 0x01
+#define INA209_STATUS_MASK 0x02
+#define INA209_SHUNT_VOLTAGE 0x03
+#define INA209_BUS_VOLTAGE 0x04
+#define INA209_POWER 0x05
+#define INA209_CURRENT 0x06
+#define INA209_SHUNT_VOLTAGE_POS_PEAK 0x07
+#define INA209_SHUNT_VOLTAGE_NEG_PEAK 0x08
+#define INA209_BUS_VOLTAGE_MAX_PEAK 0x09
+#define INA209_BUS_VOLTAGE_MIN_PEAK 0x0a
+#define INA209_POWER_PEAK 0x0b
+#define INA209_SHUNT_VOLTAGE_POS_WARN 0x0c
+#define INA209_SHUNT_VOLTAGE_NEG_WARN 0x0d
+#define INA209_POWER_WARN 0x0e
+#define INA209_BUS_VOLTAGE_OVER_WARN 0x0f
+#define INA209_BUS_VOLTAGE_UNDER_WARN 0x10
+#define INA209_POWER_OVER_LIMIT 0x11
+#define INA209_BUS_VOLTAGE_OVER_LIMIT 0x12
+#define INA209_BUS_VOLTAGE_UNDER_LIMIT 0x13
+#define INA209_CRITICAL_DAC_POS 0x14
+#define INA209_CRITICAL_DAC_NEG 0x15
+#define INA209_CALIBRATION 0x16
+
+#define INA209_REGISTERS 0x17
+
+#define INA209_CONFIG_DEFAULT 0x3c47 /* PGA=8, full range */
+#define INA209_SHUNT_DEFAULT 10000 /* uOhm */
+
+struct ina209_data {
+ struct device *hwmon_dev;
+
+ struct mutex update_lock;
+ bool valid;
+ unsigned long last_updated; /* in jiffies */
+
+ u16 regs[INA209_REGISTERS]; /* All chip registers */
+
+ u16 config_orig; /* Original configuration */
+ u16 calibration_orig; /* Original calibration */
+ u16 update_interval;
+};
+
+static struct ina209_data *ina209_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina209_data *data = i2c_get_clientdata(client);
+ struct ina209_data *ret = data;
+ s32 val;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!data->valid ||
+ time_after(jiffies, data->last_updated + data->update_interval)) {
+ for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
+ val = i2c_smbus_read_word_swapped(client, i);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->regs[i] = val;
+ }
+ data->last_updated = jiffies;
+ data->valid = true;
+ }
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+/*
+ * Read a value from a device register and convert it to the
+ * appropriate sysfs units
+ */
+static long ina209_from_reg(const u8 reg, const u16 val)
+{
+ switch (reg) {
+ case INA209_SHUNT_VOLTAGE:
+ case INA209_SHUNT_VOLTAGE_POS_PEAK:
+ case INA209_SHUNT_VOLTAGE_NEG_PEAK:
+ case INA209_SHUNT_VOLTAGE_POS_WARN:
+ case INA209_SHUNT_VOLTAGE_NEG_WARN:
+ /* LSB=10 uV. Convert to mV. */
+ return DIV_ROUND_CLOSEST(val, 100);
+
+ case INA209_BUS_VOLTAGE:
+ case INA209_BUS_VOLTAGE_MAX_PEAK:
+ case INA209_BUS_VOLTAGE_MIN_PEAK:
+ case INA209_BUS_VOLTAGE_OVER_WARN:
+ case INA209_BUS_VOLTAGE_UNDER_WARN:
+ case INA209_BUS_VOLTAGE_OVER_LIMIT:
+ case INA209_BUS_VOLTAGE_UNDER_LIMIT:
+ /* LSB=4 mV, last 3 bits unused */
+ return (val >> 3) * 4;
+
+ case INA209_CRITICAL_DAC_POS:
+ /* LSB=1 mV, in the upper 8 bits */
+ return val >> 8;
+
+ case INA209_CRITICAL_DAC_NEG:
+ /* LSB=1 mV, in the upper 8 bits */
+ return -1 * (val >> 8);
+
+ case INA209_POWER:
+ case INA209_POWER_PEAK:
+ case INA209_POWER_WARN:
+ case INA209_POWER_OVER_LIMIT:
+ /* LSB=20 mW. Convert to uW */
+ return val * 20 * 1000L;
+
+ case INA209_CURRENT:
+ /* LSB=1 mA (selected). Is in mA */
+ return val;
+ }
+
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ return 0;
+}
+
+/*
+ * Take a value and convert it to register format, clamping the value
+ * to the appropriate range.
+ */
+static int ina209_to_reg(u8 reg, u16 old, long val)
+{
+ switch (reg) {
+ case INA209_SHUNT_VOLTAGE_POS_WARN:
+ case INA209_SHUNT_VOLTAGE_NEG_WARN:
+ /* Limit to +- 320 mV, 10 uV LSB */
+ return clamp_val(val, -320, 320) * 100;
+
+ case INA209_BUS_VOLTAGE_OVER_WARN:
+ case INA209_BUS_VOLTAGE_UNDER_WARN:
+ case INA209_BUS_VOLTAGE_OVER_LIMIT:
+ case INA209_BUS_VOLTAGE_UNDER_LIMIT:
+ /*
+ * Limit to 0-32000 mV, 4 mV LSB
+ *
+ * The last three bits aren't part of the value, but we'll
+ * preserve them in their original state.
+ */
+ return (DIV_ROUND_CLOSEST(clamp_val(val, 0, 32000), 4) << 3)
+ | (old & 0x7);
+
+ case INA209_CRITICAL_DAC_NEG:
+ /*
+ * Limit to -255-0 mV, 1 mV LSB
+ * Convert the value to a positive value for the register
+ *
+ * The value lives in the top 8 bits only, be careful
+ * and keep original value of other bits.
+ */
+ return (clamp_val(-val, 0, 255) << 8) | (old & 0xff);
+
+ case INA209_CRITICAL_DAC_POS:
+ /*
+ * Limit to 0-255 mV, 1 mV LSB
+ *
+ * The value lives in the top 8 bits only, be careful
+ * and keep original value of other bits.
+ */
+ return (clamp_val(val, 0, 255) << 8) | (old & 0xff);
+
+ case INA209_POWER_WARN:
+ case INA209_POWER_OVER_LIMIT:
+ /* 20 mW LSB */
+ return DIV_ROUND_CLOSEST(val, 20 * 1000);
+ }
+
+ /* Other registers are read-only, return access error */
+ return -EACCES;
+}
+
+static int ina209_interval_from_reg(u16 reg)
+{
+ return 68 >> (15 - ((reg >> 3) & 0x0f));
+}
+
+static u16 ina209_reg_from_interval(u16 config, long interval)
+{
+ int i, adc;
+
+ if (interval <= 0) {
+ adc = 8;
+ } else {
+ adc = 15;
+ for (i = 34 + 34 / 2; i; i >>= 1) {
+ if (i < interval)
+ break;
+ adc--;
+ }
+ }
+ return (config & 0xf807) | (adc << 3) | (adc << 7);
+}
+
+static ssize_t ina209_set_interval(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina209_data *data = ina209_update_device(dev);
+ long val;
+ u16 regval;
+ int ret;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ ret = kstrtol(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ regval = ina209_reg_from_interval(data->regs[INA209_CONFIGURATION],
+ val);
+ i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION, regval);
+ data->regs[INA209_CONFIGURATION] = regval;
+ data->update_interval = ina209_interval_from_reg(regval);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t ina209_show_interval(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina209_data *data = i2c_get_clientdata(client);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", data->update_interval);
+}
+
+/*
+ * History is reset by writing 1 into bit 0 of the respective peak register.
+ * Since more than one peak register may be affected by the scope of a
+ * reset_history attribute write, use a bit mask in attr->index to identify
+ * which registers are affected.
+ */
+static u16 ina209_reset_history_regs[] = {
+ INA209_SHUNT_VOLTAGE_POS_PEAK,
+ INA209_SHUNT_VOLTAGE_NEG_PEAK,
+ INA209_BUS_VOLTAGE_MAX_PEAK,
+ INA209_BUS_VOLTAGE_MIN_PEAK,
+ INA209_POWER_PEAK
+};
+
+static ssize_t ina209_reset_history(struct device *dev,
+ struct device_attribute *da,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina209_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ u32 mask = attr->index;
+ long val;
+ int i, ret;
+
+ ret = kstrtol(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ for (i = 0; i < ARRAY_SIZE(ina209_reset_history_regs); i++) {
+ if (mask & (1 << i))
+ i2c_smbus_write_word_swapped(client,
+ ina209_reset_history_regs[i], 1);
+ }
+ data->valid = false;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t ina209_set_value(struct device *dev,
+ struct device_attribute *da,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina209_data *data = ina209_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int reg = attr->index;
+ long val;
+ int ret;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ ret = kstrtol(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ ret = ina209_to_reg(reg, data->regs[reg], val);
+ if (ret < 0) {
+ count = ret;
+ goto abort;
+ }
+ i2c_smbus_write_word_swapped(client, reg, ret);
+ data->regs[reg] = ret;
+abort:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t ina209_show_value(struct device *dev,
+ struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina209_data *data = ina209_update_device(dev);
+ long val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = ina209_from_reg(attr->index, data->regs[attr->index]);
+ return snprintf(buf, PAGE_SIZE, "%ld\n", val);
+}
+
+static ssize_t ina209_show_alarm(struct device *dev,
+ struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina209_data *data = ina209_update_device(dev);
+ const unsigned int mask = attr->index;
+ u16 status;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ status = data->regs[INA209_STATUS];
+
+ /*
+ * All alarms are in the INA209_STATUS register. To avoid a long
+ * switch statement, the mask is passed in attr->index
+ */
+ return snprintf(buf, PAGE_SIZE, "%u\n", !!(status & mask));
+}
+
+/* Shunt voltage, history, limits, alarms */
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina209_show_value, NULL,
+ INA209_SHUNT_VOLTAGE);
+static SENSOR_DEVICE_ATTR(in0_input_highest, S_IRUGO, ina209_show_value, NULL,
+ INA209_SHUNT_VOLTAGE_POS_PEAK);
+static SENSOR_DEVICE_ATTR(in0_input_lowest, S_IRUGO, ina209_show_value, NULL,
+ INA209_SHUNT_VOLTAGE_NEG_PEAK);
+static SENSOR_DEVICE_ATTR(in0_reset_history, S_IWUSR, NULL,
+ ina209_reset_history, (1 << 0) | (1 << 1));
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_SHUNT_VOLTAGE_POS_WARN);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_SHUNT_VOLTAGE_NEG_WARN);
+static SENSOR_DEVICE_ATTR(in0_crit_max, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_CRITICAL_DAC_POS);
+static SENSOR_DEVICE_ATTR(in0_crit_min, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_CRITICAL_DAC_NEG);
+
+static SENSOR_DEVICE_ATTR(in0_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 11);
+static SENSOR_DEVICE_ATTR(in0_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 12);
+static SENSOR_DEVICE_ATTR(in0_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 6);
+static SENSOR_DEVICE_ATTR(in0_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 7);
+
+/* Bus voltage, history, limits, alarms */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina209_show_value, NULL,
+ INA209_BUS_VOLTAGE);
+static SENSOR_DEVICE_ATTR(in1_input_highest, S_IRUGO, ina209_show_value, NULL,
+ INA209_BUS_VOLTAGE_MAX_PEAK);
+static SENSOR_DEVICE_ATTR(in1_input_lowest, S_IRUGO, ina209_show_value, NULL,
+ INA209_BUS_VOLTAGE_MIN_PEAK);
+static SENSOR_DEVICE_ATTR(in1_reset_history, S_IWUSR, NULL,
+ ina209_reset_history, (1 << 2) | (1 << 3));
+static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_BUS_VOLTAGE_OVER_WARN);
+static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_BUS_VOLTAGE_UNDER_WARN);
+static SENSOR_DEVICE_ATTR(in1_crit_max, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_BUS_VOLTAGE_OVER_LIMIT);
+static SENSOR_DEVICE_ATTR(in1_crit_min, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_BUS_VOLTAGE_UNDER_LIMIT);
+
+static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 14);
+static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 15);
+static SENSOR_DEVICE_ATTR(in1_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 9);
+static SENSOR_DEVICE_ATTR(in1_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 10);
+
+/* Power */
+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina209_show_value, NULL,
+ INA209_POWER);
+static SENSOR_DEVICE_ATTR(power1_input_highest, S_IRUGO, ina209_show_value,
+ NULL, INA209_POWER_PEAK);
+static SENSOR_DEVICE_ATTR(power1_reset_history, S_IWUSR, NULL,
+ ina209_reset_history, 1 << 4);
+static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_POWER_WARN);
+static SENSOR_DEVICE_ATTR(power1_crit, S_IRUGO | S_IWUSR, ina209_show_value,
+ ina209_set_value, INA209_POWER_OVER_LIMIT);
+
+static SENSOR_DEVICE_ATTR(power1_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 13);
+static SENSOR_DEVICE_ATTR(power1_crit_alarm, S_IRUGO, ina209_show_alarm, NULL,
+ 1 << 8);
+
+/* Current */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina209_show_value, NULL,
+ INA209_CURRENT);
+
+static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
+ ina209_show_interval, ina209_set_interval, 0);
+
+/*
+ * Finally, construct an array of pointers to members of the above objects,
+ * as required for sysfs_create_group()
+ */
+static struct attribute *ina209_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_input_highest.dev_attr.attr,
+ &sensor_dev_attr_in0_input_lowest.dev_attr.attr,
+ &sensor_dev_attr_in0_reset_history.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_crit_max.dev_attr.attr,
+ &sensor_dev_attr_in0_crit_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_crit_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_crit_min_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input_highest.dev_attr.attr,
+ &sensor_dev_attr_in1_input_lowest.dev_attr.attr,
+ &sensor_dev_attr_in1_reset_history.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_crit_max.dev_attr.attr,
+ &sensor_dev_attr_in1_crit_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_crit_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_crit_min_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_power1_input.dev_attr.attr,
+ &sensor_dev_attr_power1_input_highest.dev_attr.attr,
+ &sensor_dev_attr_power1_reset_history.dev_attr.attr,
+ &sensor_dev_attr_power1_max.dev_attr.attr,
+ &sensor_dev_attr_power1_crit.dev_attr.attr,
+ &sensor_dev_attr_power1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_power1_crit_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+
+ NULL,
+};
+
+static const struct attribute_group ina209_group = {
+ .attrs = ina209_attributes,
+};
+
+static void ina209_restore_conf(struct i2c_client *client,
+ struct ina209_data *data)
+{
+ /* Restore initial configuration */
+ i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
+ data->config_orig);
+ i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
+ data->calibration_orig);
+}
+
+static int ina209_init_client(struct i2c_client *client,
+ struct ina209_data *data)
+{
+ struct ina2xx_platform_data *pdata = dev_get_platdata(&client->dev);
+ u32 shunt;
+ int reg;
+
+ reg = i2c_smbus_read_word_swapped(client, INA209_CALIBRATION);
+ if (reg < 0)
+ return reg;
+ data->calibration_orig = reg;
+
+ reg = i2c_smbus_read_word_swapped(client, INA209_CONFIGURATION);
+ if (reg < 0)
+ return reg;
+ data->config_orig = reg;
+
+ if (pdata) {
+ if (pdata->shunt_uohms <= 0)
+ return -EINVAL;
+ shunt = pdata->shunt_uohms;
+ } else if (!of_property_read_u32(client->dev.of_node, "shunt-resistor",
+ &shunt)) {
+ if (shunt == 0)
+ return -EINVAL;
+ } else {
+ shunt = data->calibration_orig ?
+ 40960000 / data->calibration_orig : INA209_SHUNT_DEFAULT;
+ }
+
+ i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
+ INA209_CONFIG_DEFAULT);
+ data->update_interval = ina209_interval_from_reg(INA209_CONFIG_DEFAULT);
+
+ /*
+ * Calibrate current LSB to 1mA. Shunt is in uOhms.
+ * See equation 13 in datasheet.
+ */
+ i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
+ clamp_val(40960000 / shunt, 1, 65535));
+
+ /* Clear status register */
+ i2c_smbus_read_word_swapped(client, INA209_STATUS);
+
+ return 0;
+}
+
+static int ina209_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct ina209_data *data;
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ ret = ina209_init_client(client, data);
+ if (ret)
+ return ret;
+
+ /* Register sysfs hooks */
+ ret = sysfs_create_group(&client->dev.kobj, &ina209_group);
+ if (ret)
+ goto out_restore_conf;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto out_hwmon_device_register;
+ }
+
+ return 0;
+
+out_hwmon_device_register:
+ sysfs_remove_group(&client->dev.kobj, &ina209_group);
+out_restore_conf:
+ ina209_restore_conf(client, data);
+ return ret;
+}
+
+static int ina209_remove(struct i2c_client *client)
+{
+ struct ina209_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &ina209_group);
+ ina209_restore_conf(client, data);
+
+ return 0;
+}
+
+static const struct i2c_device_id ina209_id[] = {
+ { "ina209", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ina209_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ina209_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "ina209",
+ },
+ .probe = ina209_probe,
+ .remove = ina209_remove,
+ .id_table = ina209_id,
+};
+
+module_i2c_driver(ina209_driver);
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>, Paul Hays <Paul.Hays@cattail.ca>, Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("INA209 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 117d66f..37fc980 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -19,6 +19,8 @@
* IT8726F Super I/O chip w/LPC interface
* IT8728F Super I/O chip w/LPC interface
* IT8758E Super I/O chip w/LPC interface
+ * IT8771E Super I/O chip w/LPC interface
+ * IT8772E Super I/O chip w/LPC interface
* IT8782F Super I/O chip w/LPC interface
* IT8783E/F Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
@@ -61,8 +63,8 @@
#define DRVNAME "it87"
-enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8782,
- it8783 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
+ it8772, it8782, it8783 };
static unsigned short force_id;
module_param(force_id, ushort, 0);
@@ -140,6 +142,8 @@
#define IT8721F_DEVID 0x8721
#define IT8726F_DEVID 0x8726
#define IT8728F_DEVID 0x8728
+#define IT8771E_DEVID 0x8771
+#define IT8772E_DEVID 0x8772
#define IT8782F_DEVID 0x8782
#define IT8783E_DEVID 0x8783
#define IT87_ACT_REG 0x30
@@ -281,6 +285,24 @@
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
.peci_mask = 0x07,
},
+ [it8771] = {
+ .name = "it8771",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ /* PECI: guesswork */
+ /* 12mV ADC (OHM) */
+ /* 16 bit fans (OHM) */
+ .peci_mask = 0x07,
+ },
+ [it8772] = {
+ .name = "it8772",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ /* PECI (coreboot) */
+ /* 12mV ADC (HWSensors4, OHM) */
+ /* 16 bit fans (HWSensors4, OHM) */
+ .peci_mask = 0x07,
+ },
[it8782] = {
.name = "it8782",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
@@ -384,7 +406,7 @@
static u8 in_to_reg(const struct it87_data *data, int nr, long val)
{
val = DIV_ROUND_CLOSEST(val, adc_lsb(data, nr));
- return SENSORS_LIMIT(val, 0, 255);
+ return clamp_val(val, 0, 255);
}
static int in_from_reg(const struct it87_data *data, int nr, int val)
@@ -396,16 +418,15 @@
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
- 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline u16 FAN16_TO_REG(long rpm)
{
if (rpm == 0)
return 0xffff;
- return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+ return clamp_val((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
@@ -414,8 +435,8 @@
#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
1350000 / ((val) * 2))
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (((val) - 500) / 1000) : \
- ((val) + 500) / 1000), -128, 127))
+#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (((val) - 500) / 1000) : \
+ ((val) + 500) / 1000), -128, 127))
#define TEMP_FROM_REG(val) ((val) * 1000)
static u8 pwm_to_reg(const struct it87_data *data, long val)
@@ -1709,6 +1730,12 @@
case IT8728F_DEVID:
sio_data->type = it8728;
break;
+ case IT8771E_DEVID:
+ sio_data->type = it8771;
+ break;
+ case IT8772E_DEVID:
+ sio_data->type = it8772;
+ break;
case IT8782F_DEVID:
sio_data->type = it8782;
break;
@@ -1826,10 +1853,11 @@
reg = superio_inb(IT87_SIO_GPIO3_REG);
if (sio_data->type == it8721 || sio_data->type == it8728 ||
+ sio_data->type == it8771 || sio_data->type == it8772 ||
sio_data->type == it8782) {
/*
* IT8721F/IT8758E, and IT8782F don't have VID pins
- * at all, not sure about the IT8728F.
+ * at all, not sure about the IT8728F and compatibles.
*/
sio_data->skip_vid = 1;
} else {
@@ -1883,7 +1911,9 @@
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
if ((reg & (1 << 1)) || sio_data->type == it8721 ||
- sio_data->type == it8728)
+ sio_data->type == it8728 ||
+ sio_data->type == it8771 ||
+ sio_data->type == it8772)
sio_data->internal |= (1 << 1);
/*
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index e21e43c..4a58f13 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -103,6 +103,9 @@
#define MCP98243_DEVID 0x2100
#define MCP98243_DEVID_MASK 0xfffc
+#define MCP98244_DEVID 0x2200
+#define MCP98244_DEVID_MASK 0xfffc
+
#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
#define MCP9843_DEVID_MASK 0xfffe
@@ -147,6 +150,7 @@
{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
+ { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
{ NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
{ ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
@@ -237,9 +241,9 @@
static u16 jc42_temp_to_reg(int temp, bool extended)
{
- int ntemp = SENSORS_LIMIT(temp,
- extended ? JC42_TEMP_MIN_EXTENDED :
- JC42_TEMP_MIN, JC42_TEMP_MAX);
+ int ntemp = clamp_val(temp,
+ extended ? JC42_TEMP_MIN_EXTENDED :
+ JC42_TEMP_MIN, JC42_TEMP_MAX);
/* convert from 0.001 to 0.0625 resolution */
return (ntemp * 2 / 125) & 0x1fff;
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index eed4d94..f644a2e 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -209,9 +209,9 @@
{
val -= data->temp2_offset;
if (data->lut_temp_highres)
- return DIV_ROUND_CLOSEST(SENSORS_LIMIT(val, 0, 127500), 500);
+ return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127500), 500);
else
- return DIV_ROUND_CLOSEST(SENSORS_LIMIT(val, 0, 127000), 1000);
+ return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127000), 1000);
}
/*
@@ -415,7 +415,7 @@
return err;
reg = nr ? LM63_REG_LUT_PWM(nr - 1) : LM63_REG_PWM_VALUE;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm1[nr] = data->pwm_highres ? val :
@@ -700,7 +700,7 @@
return err;
mutex_lock(&data->update_lock);
- lm63_set_convrate(client, data, SENSORS_LIMIT(val, 0, 100000));
+ lm63_set_convrate(client, data, clamp_val(val, 0, 100000));
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 7272176..9bde964 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -8,6 +8,7 @@
* Guillaume Ligneul <guillaume.ligneul@gmail.com>
* Adrien Demarez <adrien.demarez@bolloretelecom.eu>
* Jeremy Laine <jeremy.laine@bolloretelecom.eu>
+ * Chris Verges <kg4ysn@gmail.com>
*
* This software program is licensed subject to the GNU General Public License
* (GPL).Version 2,June 1991, available at
@@ -36,12 +37,31 @@
#define LM73_ID 0x9001 /* 0x0190, byte-swapped */
#define DRVNAME "lm73"
-#define LM73_TEMP_MIN (-40)
-#define LM73_TEMP_MAX 150
+#define LM73_TEMP_MIN (-256000 / 250)
+#define LM73_TEMP_MAX (255750 / 250)
+
+#define LM73_CTRL_RES_SHIFT 5
+#define LM73_CTRL_RES_MASK (BIT(5) | BIT(6))
+#define LM73_CTRL_TO_MASK BIT(7)
+
+#define LM73_CTRL_HI_SHIFT 2
+#define LM73_CTRL_LO_SHIFT 1
+
+static const unsigned short lm73_convrates[] = {
+ 14, /* 11-bits (0.25000 C/LSB): RES1 Bit = 0, RES0 Bit = 0 */
+ 28, /* 12-bits (0.12500 C/LSB): RES1 Bit = 0, RES0 Bit = 1 */
+ 56, /* 13-bits (0.06250 C/LSB): RES1 Bit = 1, RES0 Bit = 0 */
+ 112, /* 14-bits (0.03125 C/LSB): RES1 Bit = 1, RES0 Bit = 1 */
+};
+
+struct lm73_data {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ u8 ctrl; /* control register value */
+};
/*-----------------------------------------------------------------------*/
-
static ssize_t set_temp(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
@@ -56,8 +76,7 @@
return status;
/* Write value */
- value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
- (LM73_TEMP_MAX*4)) << 5;
+ value = clamp_val(temp / 250, LM73_TEMP_MIN, LM73_TEMP_MAX) << 5;
err = i2c_smbus_write_word_swapped(client, attr->index, value);
return (err < 0) ? err : count;
}
@@ -79,6 +98,73 @@
return scnprintf(buf, PAGE_SIZE, "%d\n", temp);
}
+static ssize_t set_convrate(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm73_data *data = i2c_get_clientdata(client);
+ unsigned long convrate;
+ s32 err;
+ int res = 0;
+
+ err = kstrtoul(buf, 10, &convrate);
+ if (err < 0)
+ return err;
+
+ /*
+ * Convert the desired conversion rate into register bits.
+ * res is already initialized, and everything past the second-to-last
+ * value in the array is treated as belonging to the last value
+ * in the array.
+ */
+ while (res < (ARRAY_SIZE(lm73_convrates) - 1) &&
+ convrate > lm73_convrates[res])
+ res++;
+
+ mutex_lock(&data->lock);
+ data->ctrl &= LM73_CTRL_TO_MASK;
+ data->ctrl |= res << LM73_CTRL_RES_SHIFT;
+ err = i2c_smbus_write_byte_data(client, LM73_REG_CTRL, data->ctrl);
+ mutex_unlock(&data->lock);
+
+ if (err < 0)
+ return err;
+
+ return count;
+}
+
+static ssize_t show_convrate(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm73_data *data = i2c_get_clientdata(client);
+ int res;
+
+ res = (data->ctrl & LM73_CTRL_RES_MASK) >> LM73_CTRL_RES_SHIFT;
+ return scnprintf(buf, PAGE_SIZE, "%hu\n", lm73_convrates[res]);
+}
+
+static ssize_t show_maxmin_alarm(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct lm73_data *data = i2c_get_clientdata(client);
+ s32 ctrl;
+
+ mutex_lock(&data->lock);
+ ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL);
+ if (ctrl < 0)
+ goto abort;
+ data->ctrl = ctrl;
+ mutex_unlock(&data->lock);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (ctrl >> attr->index) & 1);
+
+abort:
+ mutex_unlock(&data->lock);
+ return ctrl;
+}
/*-----------------------------------------------------------------------*/
@@ -90,13 +176,20 @@
show_temp, set_temp, LM73_REG_MIN);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp, NULL, LM73_REG_INPUT);
-
+static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
+ show_convrate, set_convrate, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
+ show_maxmin_alarm, NULL, LM73_CTRL_HI_SHIFT);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
+ show_maxmin_alarm, NULL, LM73_CTRL_LO_SHIFT);
static struct attribute *lm73_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
-
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
NULL
};
@@ -111,23 +204,36 @@
static int
lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
- struct device *hwmon_dev;
int status;
+ struct lm73_data *data;
+ int ctrl;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct lm73_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
+
+ ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL);
+ if (ctrl < 0)
+ return ctrl;
+ data->ctrl = ctrl;
/* Register sysfs hooks */
status = sysfs_create_group(&client->dev.kobj, &lm73_group);
if (status)
return status;
- hwmon_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(hwmon_dev)) {
- status = PTR_ERR(hwmon_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ status = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
- i2c_set_clientdata(client, hwmon_dev);
dev_info(&client->dev, "%s: sensor '%s'\n",
- dev_name(hwmon_dev), client->name);
+ dev_name(data->hwmon_dev), client->name);
return 0;
@@ -138,9 +244,9 @@
static int lm73_remove(struct i2c_client *client)
{
- struct device *hwmon_dev = i2c_get_clientdata(client);
+ struct lm73_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(hwmon_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm73_group);
return 0;
}
diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h
index 89aa909..668ff47 100644
--- a/drivers/hwmon/lm75.h
+++ b/drivers/hwmon/lm75.h
@@ -36,7 +36,7 @@
REG: (0.5C/bit, two's complement) << 7 */
static inline u16 LM75_TEMP_TO_REG(long temp)
{
- int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
+ int ntemp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
ntemp += (ntemp < 0 ? -250 : 250);
return (u16)((ntemp / 500) << 7);
}
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index f82acf6..f17beb5 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -101,7 +101,7 @@
*/
static inline s16 LM77_TEMP_TO_REG(int temp)
{
- int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
+ int ntemp = clamp_val(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
return (ntemp / 500) * 8;
}
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 53d6ee8..483538f 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -85,7 +85,7 @@
*/
static inline u8 IN_TO_REG(unsigned long val)
{
- unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+ unsigned long nval = clamp_val(val, 0, 4080);
return (nval + 8) / 16;
}
#define IN_FROM_REG(val) ((val) * 16)
@@ -94,7 +94,7 @@
{
if (rpm <= 0)
return 255;
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline int FAN_FROM_REG(u8 val, int div)
@@ -108,7 +108,7 @@
*/
static inline s8 TEMP_TO_REG(int val)
{
- int nval = SENSORS_LIMIT(val, -128000, 127000) ;
+ int nval = clamp_val(val, -128000, 127000) ;
return nval < 0 ? (nval - 500) / 1000 : (nval + 500) / 1000;
}
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 28a8b71..357fbb9 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -72,15 +72,15 @@
* Fixing this is just not worth it.
*/
-#define IN_TO_REG(val) (SENSORS_LIMIT(((val) + 5) / 10, 0, 255))
+#define IN_TO_REG(val) (clamp_val(((val) + 5) / 10, 0, 255))
#define IN_FROM_REG(val) ((val) * 10)
static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div)
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \
@@ -102,7 +102,7 @@
#define TEMP_LIMIT_FROM_REG(val) (((val) > 0x80 ? \
(val) - 0x100 : (val)) * 1000)
-#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) < 0 ? \
+#define TEMP_LIMIT_TO_REG(val) clamp_val((val) < 0 ? \
((val) - 500) / 1000 : ((val) + 500) / 1000, 0, 255)
#define DIV_FROM_REG(val) (1 << (val))
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 9f2dd77..47ade8b 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -139,7 +139,7 @@
#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from))
#define INS_TO_REG(n, val) \
- SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255)
+ clamp_val(SCALE(val, lm85_scaling[n], 192), 0, 255)
#define INSEXT_FROM_REG(n, val, ext) \
SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
@@ -151,19 +151,19 @@
{
if (!val)
return 0xffff;
- return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
+ return clamp_val(5400000 / val, 1, 0xfffe);
}
#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
5400000 / (val))
/* Temperature is reported in .001 degC increments */
#define TEMP_TO_REG(val) \
- SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127)
+ clamp_val(SCALE(val, 1000, 1), -127, 127)
#define TEMPEXT_FROM_REG(val, ext) \
SCALE(((val) << 4) + (ext), 16, 1000)
#define TEMP_FROM_REG(val) ((val) * 1000)
-#define PWM_TO_REG(val) SENSORS_LIMIT(val, 0, 255)
+#define PWM_TO_REG(val) clamp_val(val, 0, 255)
#define PWM_FROM_REG(val) (val)
@@ -258,7 +258,7 @@
return i << 5;
}
-#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
+#define HYST_TO_REG(val) clamp_val(((val) + 500) / 1000, 0, 15)
#define HYST_FROM_REG(val) ((val) * 1000)
/*
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 863412a..8eeb141 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -931,7 +931,7 @@
return err;
mutex_lock(&data->update_lock);
- lm90_set_convrate(client, data, SENSORS_LIMIT(val, 0, 100000));
+ lm90_set_convrate(client, data, clamp_val(val, 0, 100000));
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 1a003f7..b40f34c 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -371,8 +371,8 @@
static u8 LM93_IN_TO_REG(int nr, unsigned val)
{
/* range limit */
- const long mV = SENSORS_LIMIT(val,
- lm93_vin_val_min[nr], lm93_vin_val_max[nr]);
+ const long mV = clamp_val(val,
+ lm93_vin_val_min[nr], lm93_vin_val_max[nr]);
/* try not to lose too much precision here */
const long uV = mV * 1000;
@@ -385,8 +385,8 @@
const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
u8 result = ((uV - intercept + (slope/2)) / slope);
- result = SENSORS_LIMIT(result,
- lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
+ result = clamp_val(result,
+ lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
return result;
}
@@ -411,10 +411,10 @@
{
long uV_offset = vid * 1000 - val * 10000;
if (upper) {
- uV_offset = SENSORS_LIMIT(uV_offset, 12500, 200000);
+ uV_offset = clamp_val(uV_offset, 12500, 200000);
return (u8)((uV_offset / 12500 - 1) << 4);
} else {
- uV_offset = SENSORS_LIMIT(uV_offset, -400000, -25000);
+ uV_offset = clamp_val(uV_offset, -400000, -25000);
return (u8)((uV_offset / -25000 - 1) << 0);
}
}
@@ -437,7 +437,7 @@
*/
static u8 LM93_TEMP_TO_REG(long temp)
{
- int ntemp = SENSORS_LIMIT(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
+ int ntemp = clamp_val(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
ntemp += (ntemp < 0 ? -500 : 500);
return (u8)(ntemp / 1000);
}
@@ -472,7 +472,7 @@
{
int factor = mode ? 5 : 10;
- off = SENSORS_LIMIT(off, LM93_TEMP_OFFSET_MIN,
+ off = clamp_val(off, LM93_TEMP_OFFSET_MIN,
mode ? LM93_TEMP_OFFSET_MAX1 : LM93_TEMP_OFFSET_MAX0);
return (u8)((off + factor/2) / factor);
}
@@ -620,8 +620,8 @@
if (rpm == 0) {
count = 0x3fff;
} else {
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- count = SENSORS_LIMIT((1350000 + rpm) / rpm, 1, 0x3ffe);
+ rpm = clamp_val(rpm, 1, 1000000);
+ count = clamp_val((1350000 + rpm) / rpm, 1, 0x3ffe);
}
regs = count << 2;
@@ -692,7 +692,7 @@
*/
static u8 LM93_RAMP_TO_REG(int ramp)
{
- ramp = SENSORS_LIMIT(ramp, LM93_RAMP_MIN, LM93_RAMP_MAX);
+ ramp = clamp_val(ramp, LM93_RAMP_MIN, LM93_RAMP_MAX);
return (u8)((ramp + 2) / 5);
}
@@ -702,7 +702,7 @@
*/
static u8 LM93_PROCHOT_TO_REG(long prochot)
{
- prochot = SENSORS_LIMIT(prochot, 0, 255);
+ prochot = clamp_val(prochot, 0, 255);
return (u8)prochot;
}
@@ -2052,7 +2052,7 @@
return err;
mutex_lock(&data->update_lock);
- data->block9[nr][LM93_PWM_CTL1] = SENSORS_LIMIT(val, 0, 255);
+ data->block9[nr][LM93_PWM_CTL1] = clamp_val(val, 0, 255);
lm93_write_byte(client, LM93_REG_PWM_CTL(nr, LM93_PWM_CTL1),
data->block9[nr][LM93_PWM_CTL1]);
mutex_unlock(&data->update_lock);
@@ -2397,7 +2397,7 @@
mutex_lock(&data->update_lock);
data->prochot_override = (data->prochot_override & 0xf0) |
- SENSORS_LIMIT(val, 0, 15);
+ clamp_val(val, 0, 15);
lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
data->prochot_override);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
index 2915fd9..a6c85f0 100644
--- a/drivers/hwmon/lm95245.c
+++ b/drivers/hwmon/lm95245.c
@@ -259,7 +259,7 @@
val /= 1000;
- val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255));
+ val = clamp_val(val, 0, (index == 6 ? 127 : 255));
mutex_lock(&data->update_lock);
@@ -284,7 +284,7 @@
val /= 1000;
- val = SENSORS_LIMIT(val, 0, 31);
+ val = clamp_val(val, 0, 31);
mutex_lock(&data->update_lock);
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index e0019c6..2fa2c02 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -118,7 +118,7 @@
static inline int MV_TO_LIMIT(int mv, int range)
{
- return SENSORS_LIMIT(DIV_ROUND_CLOSEST(mv * 256, range), 0, 255);
+ return clamp_val(DIV_ROUND_CLOSEST(mv * 256, range), 0, 255);
}
static inline int ADC_TO_CURR(int adc, int gain)
diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c
index 666d9f6..a762635 100644
--- a/drivers/hwmon/max1668.c
+++ b/drivers/hwmon/max1668.c
@@ -215,7 +215,7 @@
return ret;
mutex_lock(&data->update_lock);
- data->temp_max[index] = SENSORS_LIMIT(temp/1000, -128, 127);
+ data->temp_max[index] = clamp_val(temp/1000, -128, 127);
if (i2c_smbus_write_byte_data(client,
MAX1668_REG_LIMH_WR(index),
data->temp_max[index]))
@@ -240,7 +240,7 @@
return ret;
mutex_lock(&data->update_lock);
- data->temp_min[index] = SENSORS_LIMIT(temp/1000, -128, 127);
+ data->temp_min[index] = clamp_val(temp/1000, -128, 127);
if (i2c_smbus_write_byte_data(client,
MAX1668_REG_LIML_WR(index),
data->temp_max[index]))
diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index 6e60036..3e7b426 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -74,7 +74,7 @@
#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
0 : (rpm_ranges[rpm_range] * 30) / (val))
-#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255)
+#define TEMP_LIMIT_TO_REG(val) clamp_val((val) / 1000, 0, 255)
/*
* Client data (each client gets its own)
@@ -312,7 +312,7 @@
if (res)
return res;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm[attr->index] = (u8)(val * 120 / 255);
diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c
index 223461a..57d58cd 100644
--- a/drivers/hwmon/max6642.c
+++ b/drivers/hwmon/max6642.c
@@ -239,7 +239,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_high[attr2->nr] = SENSORS_LIMIT(temp_to_reg(val), 0, 255);
+ data->temp_high[attr2->nr] = clamp_val(temp_to_reg(val), 0, 255);
i2c_smbus_write_byte_data(client, attr2->index,
data->temp_high[attr2->nr]);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index f739f83..3c16cbd 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -245,7 +245,7 @@
if (err)
return err;
- rpm = SENSORS_LIMIT(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
+ rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
/*
* Divide the required speed by 60 to get from rpm to rps, then
@@ -313,7 +313,7 @@
if (err)
return err;
- pwm = SENSORS_LIMIT(pwm, 0, 255);
+ pwm = clamp_val(pwm, 0, 255);
mutex_lock(&data->update_lock);
diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
new file mode 100644
index 0000000..bf4aa377
--- /dev/null
+++ b/drivers/hwmon/max6697.c
@@ -0,0 +1,726 @@
+/*
+ * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * based on max1668.c
+ * Copyright (c) 2011 David George <david.george@ska.ac.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+#include <linux/platform_data/max6697.h>
+
+enum chips { max6581, max6602, max6622, max6636, max6689, max6693, max6694,
+ max6697, max6698, max6699 };
+
+/* Report local sensor as temp1 */
+
+static const u8 MAX6697_REG_TEMP[] = {
+ 0x07, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x08 };
+static const u8 MAX6697_REG_TEMP_EXT[] = {
+ 0x57, 0x09, 0x52, 0x53, 0x54, 0x55, 0x56, 0 };
+static const u8 MAX6697_REG_MAX[] = {
+ 0x17, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x18 };
+static const u8 MAX6697_REG_CRIT[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27 };
+
+/*
+ * Map device tree / platform data register bit map to chip bit map.
+ * Applies to alert register and over-temperature register.
+ */
+#define MAX6697_MAP_BITS(reg) ((((reg) & 0x7e) >> 1) | \
+ (((reg) & 0x01) << 6) | ((reg) & 0x80))
+
+#define MAX6697_REG_STAT(n) (0x44 + (n))
+
+#define MAX6697_REG_CONFIG 0x41
+#define MAX6581_CONF_EXTENDED (1 << 1)
+#define MAX6693_CONF_BETA (1 << 2)
+#define MAX6697_CONF_RESISTANCE (1 << 3)
+#define MAX6697_CONF_TIMEOUT (1 << 5)
+#define MAX6697_REG_ALERT_MASK 0x42
+#define MAX6697_REG_OVERT_MASK 0x43
+
+#define MAX6581_REG_RESISTANCE 0x4a
+#define MAX6581_REG_IDEALITY 0x4b
+#define MAX6581_REG_IDEALITY_SELECT 0x4c
+#define MAX6581_REG_OFFSET 0x4d
+#define MAX6581_REG_OFFSET_SELECT 0x4e
+
+#define MAX6697_CONV_TIME 156 /* ms per channel, worst case */
+
+struct max6697_chip_data {
+ int channels;
+ u32 have_ext;
+ u32 have_crit;
+ u32 have_fault;
+ u8 valid_conf;
+ const u8 *alarm_map;
+};
+
+struct max6697_data {
+ struct device *hwmon_dev;
+
+ enum chips type;
+ const struct max6697_chip_data *chip;
+
+ int update_interval; /* in milli-seconds */
+ int temp_offset; /* in degrees C */
+
+ struct mutex update_lock;
+ unsigned long last_updated; /* In jiffies */
+ bool valid; /* true if following fields are valid */
+
+ /* 1x local and up to 7x remote */
+ u8 temp[8][4]; /* [nr][0]=temp [1]=ext [2]=max [3]=crit */
+#define MAX6697_TEMP_INPUT 0
+#define MAX6697_TEMP_EXT 1
+#define MAX6697_TEMP_MAX 2
+#define MAX6697_TEMP_CRIT 3
+ u32 alarms;
+};
+
+/* Diode fault status bits on MAX6581 are right shifted by one bit */
+static const u8 max6581_alarm_map[] = {
+ 0, 0, 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23 };
+
+static const struct max6697_chip_data max6697_chip_data[] = {
+ [max6581] = {
+ .channels = 8,
+ .have_crit = 0xff,
+ .have_ext = 0x7f,
+ .have_fault = 0xfe,
+ .valid_conf = MAX6581_CONF_EXTENDED | MAX6697_CONF_TIMEOUT,
+ .alarm_map = max6581_alarm_map,
+ },
+ [max6602] = {
+ .channels = 5,
+ .have_crit = 0x12,
+ .have_ext = 0x02,
+ .have_fault = 0x1e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6622] = {
+ .channels = 5,
+ .have_crit = 0x12,
+ .have_ext = 0x02,
+ .have_fault = 0x1e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6636] = {
+ .channels = 7,
+ .have_crit = 0x72,
+ .have_ext = 0x02,
+ .have_fault = 0x7e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6689] = {
+ .channels = 7,
+ .have_crit = 0x72,
+ .have_ext = 0x02,
+ .have_fault = 0x7e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6693] = {
+ .channels = 7,
+ .have_crit = 0x72,
+ .have_ext = 0x02,
+ .have_fault = 0x7e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6693_CONF_BETA |
+ MAX6697_CONF_TIMEOUT,
+ },
+ [max6694] = {
+ .channels = 5,
+ .have_crit = 0x12,
+ .have_ext = 0x02,
+ .have_fault = 0x1e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6693_CONF_BETA |
+ MAX6697_CONF_TIMEOUT,
+ },
+ [max6697] = {
+ .channels = 7,
+ .have_crit = 0x72,
+ .have_ext = 0x02,
+ .have_fault = 0x7e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6698] = {
+ .channels = 7,
+ .have_crit = 0x72,
+ .have_ext = 0x02,
+ .have_fault = 0x0e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+ [max6699] = {
+ .channels = 5,
+ .have_crit = 0x12,
+ .have_ext = 0x02,
+ .have_fault = 0x1e,
+ .valid_conf = MAX6697_CONF_RESISTANCE | MAX6697_CONF_TIMEOUT,
+ },
+};
+
+static struct max6697_data *max6697_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct max6697_data *data = i2c_get_clientdata(client);
+ struct max6697_data *ret = data;
+ int val;
+ int i;
+ u32 alarms;
+
+ mutex_lock(&data->update_lock);
+
+ if (data->valid &&
+ !time_after(jiffies, data->last_updated
+ + msecs_to_jiffies(data->update_interval)))
+ goto abort;
+
+ for (i = 0; i < data->chip->channels; i++) {
+ if (data->chip->have_ext & (1 << i)) {
+ val = i2c_smbus_read_byte_data(client,
+ MAX6697_REG_TEMP_EXT[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i][MAX6697_TEMP_EXT] = val;
+ }
+
+ val = i2c_smbus_read_byte_data(client, MAX6697_REG_TEMP[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i][MAX6697_TEMP_INPUT] = val;
+
+ val = i2c_smbus_read_byte_data(client, MAX6697_REG_MAX[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i][MAX6697_TEMP_MAX] = val;
+
+ if (data->chip->have_crit & (1 << i)) {
+ val = i2c_smbus_read_byte_data(client,
+ MAX6697_REG_CRIT[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i][MAX6697_TEMP_CRIT] = val;
+ }
+ }
+
+ alarms = 0;
+ for (i = 0; i < 3; i++) {
+ val = i2c_smbus_read_byte_data(client, MAX6697_REG_STAT(i));
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ alarms = (alarms << 8) | val;
+ }
+ data->alarms = alarms;
+ data->last_updated = jiffies;
+ data->valid = true;
+abort:
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct max6697_data *data = max6697_update_device(dev);
+ int temp;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ temp = (data->temp[index][MAX6697_TEMP_INPUT] - data->temp_offset) << 3;
+ temp |= data->temp[index][MAX6697_TEMP_EXT] >> 5;
+
+ return sprintf(buf, "%d\n", temp * 125);
+}
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ int index = to_sensor_dev_attr_2(devattr)->index;
+ struct max6697_data *data = max6697_update_device(dev);
+ int temp;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ temp = data->temp[nr][index];
+ temp -= data->temp_offset;
+
+ return sprintf(buf, "%d\n", temp * 1000);
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct max6697_data *data = max6697_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ if (data->chip->alarm_map)
+ index = data->chip->alarm_map[index];
+
+ return sprintf(buf, "%u\n", (data->alarms >> index) & 0x1);
+}
+
+static ssize_t set_temp(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ int index = to_sensor_dev_attr_2(devattr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct max6697_data *data = i2c_get_clientdata(client);
+ long temp;
+ int ret;
+
+ ret = kstrtol(buf, 10, &temp);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ temp = DIV_ROUND_CLOSEST(temp, 1000) + data->temp_offset;
+ temp = clamp_val(temp, 0, data->type == max6581 ? 255 : 127);
+ data->temp[nr][index] = temp;
+ ret = i2c_smbus_write_byte_data(client,
+ index == 2 ? MAX6697_REG_MAX[nr]
+ : MAX6697_REG_CRIT[nr],
+ temp);
+ mutex_unlock(&data->update_lock);
+
+ return ret < 0 ? ret : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 0, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 0, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 1, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 1, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 2, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 2, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input, NULL, 3);
+static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 3, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp4_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 3, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp_input, NULL, 4);
+static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 4, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp5_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 4, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp_input, NULL, 5);
+static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 5, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp6_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 5, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp_input, NULL, 6);
+static SENSOR_DEVICE_ATTR_2(temp7_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 6, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp7_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 6, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp_input, NULL, 7);
+static SENSOR_DEVICE_ATTR_2(temp8_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 7, MAX6697_TEMP_MAX);
+static SENSOR_DEVICE_ATTR_2(temp8_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 7, MAX6697_TEMP_CRIT);
+
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 22);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, 19);
+static SENSOR_DEVICE_ATTR(temp6_max_alarm, S_IRUGO, show_alarm, NULL, 20);
+static SENSOR_DEVICE_ATTR(temp7_max_alarm, S_IRUGO, show_alarm, NULL, 21);
+static SENSOR_DEVICE_ATTR(temp8_max_alarm, S_IRUGO, show_alarm, NULL, 23);
+
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp5_crit_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp6_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp7_crit_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp8_crit_alarm, S_IRUGO, show_alarm, NULL, 15);
+
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_fault, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_fault, S_IRUGO, show_alarm, NULL, 7);
+
+static struct attribute *max6697_attributes[8][7] = {
+ {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_crit.dev_attr.attr,
+ &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp7_input.dev_attr.attr,
+ &sensor_dev_attr_temp7_max.dev_attr.attr,
+ &sensor_dev_attr_temp7_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp7_crit.dev_attr.attr,
+ &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp7_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp8_input.dev_attr.attr,
+ &sensor_dev_attr_temp8_max.dev_attr.attr,
+ &sensor_dev_attr_temp8_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp8_crit.dev_attr.attr,
+ &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp8_fault.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group max6697_group[8] = {
+ { .attrs = max6697_attributes[0] },
+ { .attrs = max6697_attributes[1] },
+ { .attrs = max6697_attributes[2] },
+ { .attrs = max6697_attributes[3] },
+ { .attrs = max6697_attributes[4] },
+ { .attrs = max6697_attributes[5] },
+ { .attrs = max6697_attributes[6] },
+ { .attrs = max6697_attributes[7] },
+};
+
+static void max6697_get_config_of(struct device_node *node,
+ struct max6697_platform_data *pdata)
+{
+ int len;
+ const __be32 *prop;
+
+ prop = of_get_property(node, "smbus-timeout-disable", &len);
+ if (prop)
+ pdata->smbus_timeout_disable = true;
+ prop = of_get_property(node, "extended-range-enable", &len);
+ if (prop)
+ pdata->extended_range_enable = true;
+ prop = of_get_property(node, "beta-compensation-enable", &len);
+ if (prop)
+ pdata->beta_compensation = true;
+ prop = of_get_property(node, "alert-mask", &len);
+ if (prop && len == sizeof(u32))
+ pdata->alert_mask = be32_to_cpu(prop[0]);
+ prop = of_get_property(node, "over-temperature-mask", &len);
+ if (prop && len == sizeof(u32))
+ pdata->over_temperature_mask = be32_to_cpu(prop[0]);
+ prop = of_get_property(node, "resistance-cancellation", &len);
+ if (prop) {
+ if (len == sizeof(u32))
+ pdata->resistance_cancellation = be32_to_cpu(prop[0]);
+ else
+ pdata->resistance_cancellation = 0xfe;
+ }
+ prop = of_get_property(node, "transistor-ideality", &len);
+ if (prop && len == 2 * sizeof(u32)) {
+ pdata->ideality_mask = be32_to_cpu(prop[0]);
+ pdata->ideality_value = be32_to_cpu(prop[1]);
+ }
+}
+
+static int max6697_init_chip(struct i2c_client *client)
+{
+ struct max6697_data *data = i2c_get_clientdata(client);
+ struct max6697_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct max6697_platform_data p;
+ const struct max6697_chip_data *chip = data->chip;
+ int factor = chip->channels;
+ int ret, reg;
+
+ /*
+ * Don't touch configuration if neither platform data nor OF
+ * configuration was specified. If that is the case, use the
+ * current chip configuration.
+ */
+ if (!pdata && !client->dev.of_node) {
+ reg = i2c_smbus_read_byte_data(client, MAX6697_REG_CONFIG);
+ if (reg < 0)
+ return reg;
+ if (data->type == max6581) {
+ if (reg & MAX6581_CONF_EXTENDED)
+ data->temp_offset = 64;
+ reg = i2c_smbus_read_byte_data(client,
+ MAX6581_REG_RESISTANCE);
+ if (reg < 0)
+ return reg;
+ factor += hweight8(reg);
+ } else {
+ if (reg & MAX6697_CONF_RESISTANCE)
+ factor++;
+ }
+ goto done;
+ }
+
+ if (client->dev.of_node) {
+ memset(&p, 0, sizeof(p));
+ max6697_get_config_of(client->dev.of_node, &p);
+ pdata = &p;
+ }
+
+ reg = 0;
+ if (pdata->smbus_timeout_disable &&
+ (chip->valid_conf & MAX6697_CONF_TIMEOUT)) {
+ reg |= MAX6697_CONF_TIMEOUT;
+ }
+ if (pdata->extended_range_enable &&
+ (chip->valid_conf & MAX6581_CONF_EXTENDED)) {
+ reg |= MAX6581_CONF_EXTENDED;
+ data->temp_offset = 64;
+ }
+ if (pdata->resistance_cancellation &&
+ (chip->valid_conf & MAX6697_CONF_RESISTANCE)) {
+ reg |= MAX6697_CONF_RESISTANCE;
+ factor++;
+ }
+ if (pdata->beta_compensation &&
+ (chip->valid_conf & MAX6693_CONF_BETA)) {
+ reg |= MAX6693_CONF_BETA;
+ }
+
+ ret = i2c_smbus_write_byte_data(client, MAX6697_REG_CONFIG, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, MAX6697_REG_ALERT_MASK,
+ MAX6697_MAP_BITS(pdata->alert_mask));
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, MAX6697_REG_OVERT_MASK,
+ MAX6697_MAP_BITS(pdata->over_temperature_mask));
+ if (ret < 0)
+ return ret;
+
+ if (data->type == max6581) {
+ factor += hweight8(pdata->resistance_cancellation >> 1);
+ ret = i2c_smbus_write_byte_data(client, MAX6581_REG_RESISTANCE,
+ pdata->resistance_cancellation >> 1);
+ if (ret < 0)
+ return ret;
+ ret = i2c_smbus_write_byte_data(client, MAX6581_REG_IDEALITY,
+ pdata->ideality_mask >> 1);
+ if (ret < 0)
+ return ret;
+ ret = i2c_smbus_write_byte_data(client,
+ MAX6581_REG_IDEALITY_SELECT,
+ pdata->ideality_value);
+ if (ret < 0)
+ return ret;
+ }
+done:
+ data->update_interval = factor * MAX6697_CONV_TIME;
+ return 0;
+}
+
+static void max6697_remove_files(struct i2c_client *client)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(max6697_group); i++)
+ sysfs_remove_group(&client->dev.kobj, &max6697_group[i]);
+}
+
+static int max6697_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ struct max6697_data *data;
+ int i, err;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(struct max6697_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->type = id->driver_data;
+ data->chip = &max6697_chip_data[data->type];
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ err = max6697_init_chip(client);
+ if (err)
+ return err;
+
+ for (i = 0; i < data->chip->channels; i++) {
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][0]);
+ if (err)
+ goto error;
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][1]);
+ if (err)
+ goto error;
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][2]);
+ if (err)
+ goto error;
+
+ if (data->chip->have_crit & (1 << i)) {
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][3]);
+ if (err)
+ goto error;
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][4]);
+ if (err)
+ goto error;
+ }
+ if (data->chip->have_fault & (1 << i)) {
+ err = sysfs_create_file(&dev->kobj,
+ max6697_attributes[i][5]);
+ if (err)
+ goto error;
+ }
+ }
+
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ max6697_remove_files(client);
+ return err;
+}
+
+static int max6697_remove(struct i2c_client *client)
+{
+ struct max6697_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ max6697_remove_files(client);
+
+ return 0;
+}
+
+static const struct i2c_device_id max6697_id[] = {
+ { "max6581", max6581 },
+ { "max6602", max6602 },
+ { "max6622", max6622 },
+ { "max6636", max6636 },
+ { "max6689", max6689 },
+ { "max6693", max6693 },
+ { "max6694", max6694 },
+ { "max6697", max6697 },
+ { "max6698", max6698 },
+ { "max6699", max6699 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max6697_id);
+
+static struct i2c_driver max6697_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "max6697",
+ },
+ .probe = max6697_probe,
+ .remove = max6697_remove,
+ .id_table = max6697_id,
+};
+
+module_i2c_driver(max6697_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("MAX6697 temperature sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index a87eb89..b5f63f9 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -43,7 +43,7 @@
* The following compensation tables are from the specification of Murata NTC
* Thermistors Datasheet
*/
-const struct ntc_compensation ncpXXwb473[] = {
+static const struct ntc_compensation ncpXXwb473[] = {
{ .temp_C = -40, .ohm = 1747920 },
{ .temp_C = -35, .ohm = 1245428 },
{ .temp_C = -30, .ohm = 898485 },
@@ -79,7 +79,7 @@
{ .temp_C = 120, .ohm = 1615 },
{ .temp_C = 125, .ohm = 1406 },
};
-const struct ntc_compensation ncpXXwl333[] = {
+static const struct ntc_compensation ncpXXwl333[] = {
{ .temp_C = -40, .ohm = 1610154 },
{ .temp_C = -35, .ohm = 1130850 },
{ .temp_C = -30, .ohm = 802609 },
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 60745a5..4f9eb0a 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -72,7 +72,7 @@
default n
help
If you say yes here you get hardware monitoring support for Maxim
- MAX34440, MAX34441, and MAX34446.
+ MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461.
This driver can also be built as a module. If so, the module will
be called max34440.
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index 2ada7b0..7e930c3 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -2,6 +2,7 @@
* Hardware monitoring driver for Maxim MAX34440/MAX34441
*
* Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +26,7 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { max34440, max34441, max34446 };
+enum chips { max34440, max34441, max34446, max34460, max34461 };
#define MAX34440_MFR_VOUT_PEAK 0xd4
#define MAX34440_MFR_IOUT_PEAK 0xd5
@@ -87,7 +88,8 @@
MAX34446_MFR_POUT_PEAK);
break;
case PMBUS_VIRT_READ_TEMP_AVG:
- if (data->id != max34446)
+ if (data->id != max34446 && data->id != max34460 &&
+ data->id != max34461)
return -ENXIO;
ret = pmbus_read_word_data(client, page,
MAX34446_MFR_TEMPERATURE_AVG);
@@ -322,6 +324,73 @@
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
+ [max34460] = {
+ .pages = 18,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[14] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
+ [max34461] = {
+ .pages = 23,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 2,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[12] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[13] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[14] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ .func[15] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+ /* page 16 is reserved */
+ .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_byte_data = max34440_read_byte_data,
+ .read_word_data = max34440_read_word_data,
+ .write_word_data = max34440_write_word_data,
+ },
};
static int max34440_probe(struct i2c_client *client,
@@ -343,6 +412,8 @@
{"max34440", max34440},
{"max34441", max34441},
{"max34446", max34446},
+ {"max34460", max34460},
+ {"max34461", max34461},
{}
};
MODULE_DEVICE_TABLE(i2c, max34440_id);
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 3fe03dc..fa9beb3 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -2,6 +2,7 @@
* pmbus.h - Common defines and structures for PMBus devices
*
* Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -177,6 +178,13 @@
#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 28)
#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 29)
+#define PMBUS_VIRT_READ_VMON (PMBUS_VIRT_BASE + 30)
+#define PMBUS_VIRT_VMON_UV_WARN_LIMIT (PMBUS_VIRT_BASE + 31)
+#define PMBUS_VIRT_VMON_OV_WARN_LIMIT (PMBUS_VIRT_BASE + 32)
+#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT (PMBUS_VIRT_BASE + 33)
+#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34)
+#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35)
+
/*
* CAPABILITY
*/
@@ -317,6 +325,8 @@
#define PMBUS_HAVE_STATUS_TEMP (1 << 15)
#define PMBUS_HAVE_STATUS_FAN12 (1 << 16)
#define PMBUS_HAVE_STATUS_FAN34 (1 << 17)
+#define PMBUS_HAVE_VMON (1 << 18)
+#define PMBUS_HAVE_STATUS_VMON (1 << 19)
enum pmbus_data_format { linear = 0, direct, vid };
@@ -359,6 +369,7 @@
/* Function declarations */
+void pmbus_clear_cache(struct i2c_client *client);
int pmbus_set_page(struct i2c_client *client, u8 page);
int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 7d19b1b..80eef50 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2,6 +2,7 @@
* Hardware monitoring driver for PMBus devices
*
* Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -31,45 +32,10 @@
#include "pmbus.h"
/*
- * Constants needed to determine number of sensors, booleans, and labels.
+ * Number of additional attribute pointers to allocate
+ * with each call to krealloc
*/
-#define PMBUS_MAX_INPUT_SENSORS 22 /* 10*volt, 7*curr, 5*power */
-#define PMBUS_VOUT_SENSORS_PER_PAGE 9 /* input, min, max, lcrit,
- crit, lowest, highest, avg,
- reset */
-#define PMBUS_IOUT_SENSORS_PER_PAGE 8 /* input, min, max, crit,
- lowest, highest, avg,
- reset */
-#define PMBUS_POUT_SENSORS_PER_PAGE 7 /* input, cap, max, crit,
- * highest, avg, reset
- */
-#define PMBUS_MAX_SENSORS_PER_FAN 1 /* input */
-#define PMBUS_MAX_SENSORS_PER_TEMP 9 /* input, min, max, lcrit,
- * crit, lowest, highest, avg,
- * reset
- */
-
-#define PMBUS_MAX_INPUT_BOOLEANS 7 /* v: min_alarm, max_alarm,
- lcrit_alarm, crit_alarm;
- c: alarm, crit_alarm;
- p: crit_alarm */
-#define PMBUS_VOUT_BOOLEANS_PER_PAGE 4 /* min_alarm, max_alarm,
- lcrit_alarm, crit_alarm */
-#define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm,
- crit_alarm */
-#define PMBUS_POUT_BOOLEANS_PER_PAGE 3 /* cap_alarm, alarm, crit_alarm
- */
-#define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */
-#define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm,
- lcrit_alarm, crit_alarm */
-
-#define PMBUS_MAX_INPUT_LABELS 4 /* vin, vcap, iin, pin */
-
-/*
- * status, status_vout, status_iout, status_fans, status_fan34, and status_temp
- * are paged. status_input is unpaged.
- */
-#define PB_NUM_STATUS_REG (PMBUS_PAGES * 6 + 1)
+#define PMBUS_ATTR_ALLOC_SIZE 32
/*
* Index into status register array, per status register group
@@ -79,14 +45,18 @@
#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES)
-#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES)
-#define PB_STATUS_TEMP_BASE (PB_STATUS_INPUT_BASE + 1)
+#define PB_STATUS_TEMP_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES)
+#define PB_STATUS_INPUT_BASE (PB_STATUS_TEMP_BASE + PMBUS_PAGES)
+#define PB_STATUS_VMON_BASE (PB_STATUS_INPUT_BASE + 1)
+
+#define PB_NUM_STATUS_REG (PB_STATUS_VMON_BASE + 1)
#define PMBUS_NAME_SIZE 24
struct pmbus_sensor {
+ struct pmbus_sensor *next;
char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */
- struct sensor_device_attribute attribute;
+ struct device_attribute attribute;
u8 page; /* page number */
u16 reg; /* register */
enum pmbus_sensor_classes class; /* sensor class */
@@ -94,19 +64,28 @@
int data; /* Sensor data.
Negative if there was a read error */
};
+#define to_pmbus_sensor(_attr) \
+ container_of(_attr, struct pmbus_sensor, attribute)
struct pmbus_boolean {
char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */
struct sensor_device_attribute attribute;
+ struct pmbus_sensor *s1;
+ struct pmbus_sensor *s2;
};
+#define to_pmbus_boolean(_attr) \
+ container_of(_attr, struct pmbus_boolean, attribute)
struct pmbus_label {
char name[PMBUS_NAME_SIZE]; /* sysfs label name */
- struct sensor_device_attribute attribute;
+ struct device_attribute attribute;
char label[PMBUS_NAME_SIZE]; /* label */
};
+#define to_pmbus_label(_attr) \
+ container_of(_attr, struct pmbus_label, attribute)
struct pmbus_data {
+ struct device *dev;
struct device *hwmon_dev;
u32 flags; /* from platform data */
@@ -117,29 +96,9 @@
int max_attributes;
int num_attributes;
- struct attribute **attributes;
struct attribute_group group;
- /*
- * Sensors cover both sensor and limit registers.
- */
- int max_sensors;
- int num_sensors;
struct pmbus_sensor *sensors;
- /*
- * Booleans are used for alarms.
- * Values are determined from status registers.
- */
- int max_booleans;
- int num_booleans;
- struct pmbus_boolean *booleans;
- /*
- * Labels are used to map generic names (e.g., "in1")
- * to PMBus specific names (e.g., "vin" or "vout1").
- */
- int max_labels;
- int num_labels;
- struct pmbus_label *labels;
struct mutex update_lock;
bool valid;
@@ -150,10 +109,19 @@
* so we keep them all together.
*/
u8 status[PB_NUM_STATUS_REG];
+ u8 status_register;
u8 currpage;
};
+void pmbus_clear_cache(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ data->valid = false;
+}
+EXPORT_SYMBOL_GPL(pmbus_clear_cache);
+
int pmbus_set_page(struct i2c_client *client, u8 page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
@@ -318,9 +286,10 @@
static int pmbus_check_status_cml(struct i2c_client *client)
{
+ struct pmbus_data *data = i2c_get_clientdata(client);
int status, status2;
- status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
+ status = _pmbus_read_byte_data(client, -1, data->status_register);
if (status < 0 || (status & PB_STATUS_CML)) {
status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
@@ -329,29 +298,30 @@
return 0;
}
-bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
+static bool pmbus_check_register(struct i2c_client *client,
+ int (*func)(struct i2c_client *client,
+ int page, int reg),
+ int page, int reg)
{
int rv;
struct pmbus_data *data = i2c_get_clientdata(client);
- rv = _pmbus_read_byte_data(client, page, reg);
+ rv = func(client, page, reg);
if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
rv = pmbus_check_status_cml(client);
pmbus_clear_fault_page(client, -1);
return rv >= 0;
}
+
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
+{
+ return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
+}
EXPORT_SYMBOL_GPL(pmbus_check_byte_register);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
{
- int rv;
- struct pmbus_data *data = i2c_get_clientdata(client);
-
- rv = _pmbus_read_word_data(client, page, reg);
- if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
- rv = pmbus_check_status_cml(client);
- pmbus_clear_fault_page(client, -1);
- return rv >= 0;
+ return pmbus_check_register(client, _pmbus_read_word_data, page, reg);
}
EXPORT_SYMBOL_GPL(pmbus_check_word_register);
@@ -363,53 +333,43 @@
}
EXPORT_SYMBOL_GPL(pmbus_get_driver_info);
+static struct _pmbus_status {
+ u32 func;
+ u16 base;
+ u16 reg;
+} pmbus_status[] = {
+ { PMBUS_HAVE_STATUS_VOUT, PB_STATUS_VOUT_BASE, PMBUS_STATUS_VOUT },
+ { PMBUS_HAVE_STATUS_IOUT, PB_STATUS_IOUT_BASE, PMBUS_STATUS_IOUT },
+ { PMBUS_HAVE_STATUS_TEMP, PB_STATUS_TEMP_BASE,
+ PMBUS_STATUS_TEMPERATURE },
+ { PMBUS_HAVE_STATUS_FAN12, PB_STATUS_FAN_BASE, PMBUS_STATUS_FAN_12 },
+ { PMBUS_HAVE_STATUS_FAN34, PB_STATUS_FAN34_BASE, PMBUS_STATUS_FAN_34 },
+};
+
static struct pmbus_data *pmbus_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
+ struct pmbus_sensor *sensor;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- int i;
+ int i, j;
- for (i = 0; i < info->pages; i++)
+ for (i = 0; i < info->pages; i++) {
data->status[PB_STATUS_BASE + i]
= _pmbus_read_byte_data(client, i,
- PMBUS_STATUS_BYTE);
- for (i = 0; i < info->pages; i++) {
- if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT))
- continue;
- data->status[PB_STATUS_VOUT_BASE + i]
- = _pmbus_read_byte_data(client, i, PMBUS_STATUS_VOUT);
- }
- for (i = 0; i < info->pages; i++) {
- if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT))
- continue;
- data->status[PB_STATUS_IOUT_BASE + i]
- = _pmbus_read_byte_data(client, i, PMBUS_STATUS_IOUT);
- }
- for (i = 0; i < info->pages; i++) {
- if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP))
- continue;
- data->status[PB_STATUS_TEMP_BASE + i]
- = _pmbus_read_byte_data(client, i,
- PMBUS_STATUS_TEMPERATURE);
- }
- for (i = 0; i < info->pages; i++) {
- if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12))
- continue;
- data->status[PB_STATUS_FAN_BASE + i]
- = _pmbus_read_byte_data(client, i,
- PMBUS_STATUS_FAN_12);
- }
+ data->status_register);
+ for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) {
+ struct _pmbus_status *s = &pmbus_status[j];
- for (i = 0; i < info->pages; i++) {
- if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34))
- continue;
- data->status[PB_STATUS_FAN34_BASE + i]
- = _pmbus_read_byte_data(client, i,
- PMBUS_STATUS_FAN_34);
+ if (!(info->func[i] & s->func))
+ continue;
+ data->status[s->base + i]
+ = _pmbus_read_byte_data(client, i,
+ s->reg);
+ }
}
if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
@@ -417,9 +377,12 @@
= _pmbus_read_byte_data(client, 0,
PMBUS_STATUS_INPUT);
- for (i = 0; i < data->num_sensors; i++) {
- struct pmbus_sensor *sensor = &data->sensors[i];
+ if (info->func[0] & PMBUS_HAVE_STATUS_VMON)
+ data->status[PB_STATUS_VMON_BASE]
+ = _pmbus_read_byte_data(client, 0,
+ PMBUS_VIRT_STATUS_VMON);
+ for (sensor = data->sensors; sensor; sensor = sensor->next) {
if (!data->valid || sensor->update)
sensor->data
= _pmbus_read_word_data(client,
@@ -657,7 +620,7 @@
static u16 pmbus_data2reg_vid(struct pmbus_data *data,
enum pmbus_sensor_classes class, long val)
{
- val = SENSORS_LIMIT(val, 500, 1600);
+ val = clamp_val(val, 500, 1600);
return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625);
}
@@ -684,25 +647,20 @@
/*
* Return boolean calculated from converted data.
- * <index> defines a status register index and mask, and optionally
- * two sensor indexes.
- * The upper half-word references the two sensors,
- * two sensor indices.
- * The upper half-word references the two optional sensors,
- * the lower half word references status register and mask.
- * The function returns true if (status[reg] & mask) is true and,
- * if specified, if v1 >= v2.
- * To determine if an object exceeds upper limits, specify <v, limit>.
- * To determine if an object exceeds lower limits, specify <limit, v>.
+ * <index> defines a status register index and mask.
+ * The mask is in the lower 8 bits, the register index is in bits 8..23.
*
- * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of
- * index are set. s1 and s2 (the sensor index values) are zero in this case.
- * The function returns true if (status[reg] & mask) is true.
+ * The associated pmbus_boolean structure contains optional pointers to two
+ * sensor attributes. If specified, those attributes are compared against each
+ * other to determine if a limit has been exceeded.
*
- * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against
- * a specified limit has to be performed to determine the boolean result.
+ * If the sensor attribute pointers are NULL, the function returns true if
+ * (status[reg] & mask) is true.
+ *
+ * If sensor attribute pointers are provided, a comparison against a specified
+ * limit has to be performed to determine the boolean result.
* In this case, the function returns true if v1 >= v2 (where v1 and v2 are
- * sensor values referenced by sensor indices s1 and s2).
+ * sensor values referenced by sensor attribute pointers s1 and s2).
*
* To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
* To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
@@ -710,11 +668,12 @@
* If a negative value is stored in any of the referenced registers, this value
* reflects an error code which will be returned.
*/
-static int pmbus_get_boolean(struct pmbus_data *data, int index)
+static int pmbus_get_boolean(struct pmbus_data *data, struct pmbus_boolean *b,
+ int index)
{
- u8 s1 = (index >> 24) & 0xff;
- u8 s2 = (index >> 16) & 0xff;
- u8 reg = (index >> 8) & 0xff;
+ struct pmbus_sensor *s1 = b->s1;
+ struct pmbus_sensor *s2 = b->s2;
+ u16 reg = (index >> 8) & 0xffff;
u8 mask = index & 0xff;
int ret, status;
u8 regval;
@@ -724,21 +683,21 @@
return status;
regval = status & mask;
- if (!s1 && !s2)
+ if (!s1 && !s2) {
ret = !!regval;
- else {
+ } else if (!s1 || !s2) {
+ BUG();
+ return 0;
+ } else {
long v1, v2;
- struct pmbus_sensor *sensor1, *sensor2;
- sensor1 = &data->sensors[s1];
- if (sensor1->data < 0)
- return sensor1->data;
- sensor2 = &data->sensors[s2];
- if (sensor2->data < 0)
- return sensor2->data;
+ if (s1->data < 0)
+ return s1->data;
+ if (s2->data < 0)
+ return s2->data;
- v1 = pmbus_reg2data(data, sensor1);
- v2 = pmbus_reg2data(data, sensor2);
+ v1 = pmbus_reg2data(data, s1);
+ v2 = pmbus_reg2data(data, s2);
ret = !!(regval && v1 >= v2);
}
return ret;
@@ -748,23 +707,22 @@
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct pmbus_boolean *boolean = to_pmbus_boolean(attr);
struct pmbus_data *data = pmbus_update_device(dev);
int val;
- val = pmbus_get_boolean(data, attr->index);
+ val = pmbus_get_boolean(data, boolean, attr->index);
if (val < 0)
return val;
return snprintf(buf, PAGE_SIZE, "%d\n", val);
}
static ssize_t pmbus_show_sensor(struct device *dev,
- struct device_attribute *da, char *buf)
+ struct device_attribute *devattr, char *buf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct pmbus_data *data = pmbus_update_device(dev);
- struct pmbus_sensor *sensor;
+ struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
- sensor = &data->sensors[attr->index];
if (sensor->data < 0)
return sensor->data;
@@ -775,10 +733,9 @@
struct device_attribute *devattr,
const char *buf, size_t count)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct pmbus_data *data = i2c_get_clientdata(client);
- struct pmbus_sensor *sensor = &data->sensors[attr->index];
+ struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
ssize_t rv = count;
long val = 0;
int ret;
@@ -793,7 +750,7 @@
if (ret < 0)
rv = ret;
else
- data->sensors[attr->index].data = regval;
+ sensor->data = regval;
mutex_unlock(&data->update_lock);
return rv;
}
@@ -801,102 +758,130 @@
static ssize_t pmbus_show_label(struct device *dev,
struct device_attribute *da, char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct pmbus_data *data = i2c_get_clientdata(client);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct pmbus_label *label = to_pmbus_label(da);
- return snprintf(buf, PAGE_SIZE, "%s\n",
- data->labels[attr->index].label);
+ return snprintf(buf, PAGE_SIZE, "%s\n", label->label);
}
-#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set) \
-do { \
- struct sensor_device_attribute *a \
- = &data->_type##s[data->num_##_type##s].attribute; \
- BUG_ON(data->num_attributes >= data->max_attributes); \
- sysfs_attr_init(&a->dev_attr.attr); \
- a->dev_attr.attr.name = _name; \
- a->dev_attr.attr.mode = _mode; \
- a->dev_attr.show = _show; \
- a->dev_attr.store = _set; \
- a->index = _idx; \
- data->attributes[data->num_attributes] = &a->dev_attr.attr; \
- data->num_attributes++; \
-} while (0)
+static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
+{
+ if (data->num_attributes >= data->max_attributes - 1) {
+ data->max_attributes += PMBUS_ATTR_ALLOC_SIZE;
+ data->group.attrs = krealloc(data->group.attrs,
+ sizeof(struct attribute *) *
+ data->max_attributes, GFP_KERNEL);
+ if (data->group.attrs == NULL)
+ return -ENOMEM;
+ }
-#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx) \
- PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type, \
- pmbus_show_##_type, NULL)
+ data->group.attrs[data->num_attributes++] = attr;
+ data->group.attrs[data->num_attributes] = NULL;
+ return 0;
+}
-#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx) \
- PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type, \
- pmbus_show_##_type, pmbus_set_##_type)
+static void pmbus_dev_attr_init(struct device_attribute *dev_attr,
+ const char *name,
+ umode_t mode,
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *attr,
+ char *buf),
+ ssize_t (*store)(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count))
+{
+ sysfs_attr_init(&dev_attr->attr);
+ dev_attr->attr.name = name;
+ dev_attr->attr.mode = mode;
+ dev_attr->show = show;
+ dev_attr->store = store;
+}
-static void pmbus_add_boolean(struct pmbus_data *data,
- const char *name, const char *type, int seq,
- int idx)
+static void pmbus_attr_init(struct sensor_device_attribute *a,
+ const char *name,
+ umode_t mode,
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *attr,
+ char *buf),
+ ssize_t (*store)(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count),
+ int idx)
+{
+ pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store);
+ a->index = idx;
+}
+
+static int pmbus_add_boolean(struct pmbus_data *data,
+ const char *name, const char *type, int seq,
+ struct pmbus_sensor *s1,
+ struct pmbus_sensor *s2,
+ u16 reg, u8 mask)
{
struct pmbus_boolean *boolean;
+ struct sensor_device_attribute *a;
- BUG_ON(data->num_booleans >= data->max_booleans);
+ boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL);
+ if (!boolean)
+ return -ENOMEM;
- boolean = &data->booleans[data->num_booleans];
+ a = &boolean->attribute;
snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
name, seq, type);
- PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx);
- data->num_booleans++;
+ boolean->s1 = s1;
+ boolean->s2 = s2;
+ pmbus_attr_init(a, boolean->name, S_IRUGO, pmbus_show_boolean, NULL,
+ (reg << 8) | mask);
+
+ return pmbus_add_attribute(data, &a->dev_attr.attr);
}
-static void pmbus_add_boolean_reg(struct pmbus_data *data,
- const char *name, const char *type,
- int seq, int reg, int bit)
-{
- pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit);
-}
-
-static void pmbus_add_boolean_cmp(struct pmbus_data *data,
- const char *name, const char *type,
- int seq, int i1, int i2, int reg, int mask)
-{
- pmbus_add_boolean(data, name, type, seq,
- (i1 << 24) | (i2 << 16) | (reg << 8) | mask);
-}
-
-static void pmbus_add_sensor(struct pmbus_data *data,
- const char *name, const char *type, int seq,
- int page, int reg, enum pmbus_sensor_classes class,
- bool update, bool readonly)
+static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
+ const char *name, const char *type,
+ int seq, int page, int reg,
+ enum pmbus_sensor_classes class,
+ bool update, bool readonly)
{
struct pmbus_sensor *sensor;
+ struct device_attribute *a;
- BUG_ON(data->num_sensors >= data->max_sensors);
+ sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return NULL;
+ a = &sensor->attribute;
- sensor = &data->sensors[data->num_sensors];
snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
name, seq, type);
sensor->page = page;
sensor->reg = reg;
sensor->class = class;
sensor->update = update;
- if (readonly)
- PMBUS_ADD_GET_ATTR(data, sensor->name, sensor,
- data->num_sensors);
- else
- PMBUS_ADD_SET_ATTR(data, sensor->name, sensor,
- data->num_sensors);
- data->num_sensors++;
+ pmbus_dev_attr_init(a, sensor->name,
+ readonly ? S_IRUGO : S_IRUGO | S_IWUSR,
+ pmbus_show_sensor, pmbus_set_sensor);
+
+ if (pmbus_add_attribute(data, &a->attr))
+ return NULL;
+
+ sensor->next = data->sensors;
+ data->sensors = sensor;
+
+ return sensor;
}
-static void pmbus_add_label(struct pmbus_data *data,
- const char *name, int seq,
- const char *lstring, int index)
+static int pmbus_add_label(struct pmbus_data *data,
+ const char *name, int seq,
+ const char *lstring, int index)
{
struct pmbus_label *label;
+ struct device_attribute *a;
- BUG_ON(data->num_labels >= data->max_labels);
+ label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL);
+ if (!label)
+ return -ENOMEM;
- label = &data->labels[data->num_labels];
+ a = &label->attribute;
+
snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
if (!index)
strncpy(label->label, lstring, sizeof(label->label) - 1);
@@ -904,65 +889,8 @@
snprintf(label->label, sizeof(label->label), "%s%d", lstring,
index);
- PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels);
- data->num_labels++;
-}
-
-/*
- * Determine maximum number of sensors, booleans, and labels.
- * To keep things simple, only make a rough high estimate.
- */
-static void pmbus_find_max_attr(struct i2c_client *client,
- struct pmbus_data *data)
-{
- const struct pmbus_driver_info *info = data->info;
- int page, max_sensors, max_booleans, max_labels;
-
- max_sensors = PMBUS_MAX_INPUT_SENSORS;
- max_booleans = PMBUS_MAX_INPUT_BOOLEANS;
- max_labels = PMBUS_MAX_INPUT_LABELS;
-
- for (page = 0; page < info->pages; page++) {
- if (info->func[page] & PMBUS_HAVE_VOUT) {
- max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE;
- max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE;
- max_labels++;
- }
- if (info->func[page] & PMBUS_HAVE_IOUT) {
- max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE;
- max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE;
- max_labels++;
- }
- if (info->func[page] & PMBUS_HAVE_POUT) {
- max_sensors += PMBUS_POUT_SENSORS_PER_PAGE;
- max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE;
- max_labels++;
- }
- if (info->func[page] & PMBUS_HAVE_FAN12) {
- max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
- max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
- }
- if (info->func[page] & PMBUS_HAVE_FAN34) {
- max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
- max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
- }
- if (info->func[page] & PMBUS_HAVE_TEMP) {
- max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
- max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
- }
- if (info->func[page] & PMBUS_HAVE_TEMP2) {
- max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
- max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
- }
- if (info->func[page] & PMBUS_HAVE_TEMP3) {
- max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
- max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
- }
- }
- data->max_sensors = max_sensors;
- data->max_booleans = max_booleans;
- data->max_labels = max_labels;
- data->max_attributes = max_sensors + max_booleans + max_labels;
+ pmbus_dev_attr_init(a, label->name, S_IRUGO, pmbus_show_label, NULL);
+ return pmbus_add_attribute(data, &a->attr);
}
/*
@@ -975,12 +903,12 @@
*/
struct pmbus_limit_attr {
u16 reg; /* Limit register */
+ u16 sbit; /* Alarm attribute status bit */
bool update; /* True if register needs updates */
bool low; /* True if low limit; for limits with compare
functions only */
const char *attr; /* Attribute name */
const char *alarm; /* Alarm attribute name */
- u32 sbit; /* Alarm attribute status bit */
};
/*
@@ -988,7 +916,9 @@
* description includes a reference to the associated limit attributes.
*/
struct pmbus_sensor_attr {
- u8 reg; /* sensor register */
+ u16 reg; /* sensor register */
+ u8 gbit; /* generic status bit */
+ u8 nlimit; /* # of limit registers */
enum pmbus_sensor_classes class;/* sensor class */
const char *label; /* sensor label */
bool paged; /* true if paged sensor */
@@ -997,47 +927,47 @@
u32 func; /* sensor mask */
u32 sfunc; /* sensor status mask */
int sbase; /* status base register */
- u32 gbit; /* generic status bit */
const struct pmbus_limit_attr *limit;/* limit registers */
- int nlimit; /* # of limit registers */
};
/*
* Add a set of limit attributes and, if supported, the associated
* alarm attributes.
+ * returns 0 if no alarm register found, 1 if an alarm register was found,
+ * < 0 on errors.
*/
-static bool pmbus_add_limit_attrs(struct i2c_client *client,
- struct pmbus_data *data,
- const struct pmbus_driver_info *info,
- const char *name, int index, int page,
- int cbase,
- const struct pmbus_sensor_attr *attr)
+static int pmbus_add_limit_attrs(struct i2c_client *client,
+ struct pmbus_data *data,
+ const struct pmbus_driver_info *info,
+ const char *name, int index, int page,
+ struct pmbus_sensor *base,
+ const struct pmbus_sensor_attr *attr)
{
const struct pmbus_limit_attr *l = attr->limit;
int nlimit = attr->nlimit;
- bool have_alarm = false;
- int i, cindex;
+ int have_alarm = 0;
+ int i, ret;
+ struct pmbus_sensor *curr;
for (i = 0; i < nlimit; i++) {
if (pmbus_check_word_register(client, page, l->reg)) {
- cindex = data->num_sensors;
- pmbus_add_sensor(data, name, l->attr, index, page,
- l->reg, attr->class,
- attr->update || l->update,
- false);
+ curr = pmbus_add_sensor(data, name, l->attr, index,
+ page, l->reg, attr->class,
+ attr->update || l->update,
+ false);
+ if (!curr)
+ return -ENOMEM;
if (l->sbit && (info->func[page] & attr->sfunc)) {
- if (attr->compare) {
- pmbus_add_boolean_cmp(data, name,
- l->alarm, index,
- l->low ? cindex : cbase,
- l->low ? cbase : cindex,
- attr->sbase + page, l->sbit);
- } else {
- pmbus_add_boolean_reg(data, name,
- l->alarm, index,
- attr->sbase + page, l->sbit);
- }
- have_alarm = true;
+ ret = pmbus_add_boolean(data, name,
+ l->alarm, index,
+ attr->compare ? l->low ? curr : base
+ : NULL,
+ attr->compare ? l->low ? base : curr
+ : NULL,
+ attr->sbase + page, l->sbit);
+ if (ret)
+ return ret;
+ have_alarm = 1;
}
}
l++;
@@ -1045,45 +975,59 @@
return have_alarm;
}
-static void pmbus_add_sensor_attrs_one(struct i2c_client *client,
- struct pmbus_data *data,
- const struct pmbus_driver_info *info,
- const char *name,
- int index, int page,
- const struct pmbus_sensor_attr *attr)
+static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
+ struct pmbus_data *data,
+ const struct pmbus_driver_info *info,
+ const char *name,
+ int index, int page,
+ const struct pmbus_sensor_attr *attr)
{
- bool have_alarm;
- int cbase = data->num_sensors;
+ struct pmbus_sensor *base;
+ int ret;
- if (attr->label)
- pmbus_add_label(data, name, index, attr->label,
- attr->paged ? page + 1 : 0);
- pmbus_add_sensor(data, name, "input", index, page, attr->reg,
- attr->class, true, true);
+ if (attr->label) {
+ ret = pmbus_add_label(data, name, index, attr->label,
+ attr->paged ? page + 1 : 0);
+ if (ret)
+ return ret;
+ }
+ base = pmbus_add_sensor(data, name, "input", index, page, attr->reg,
+ attr->class, true, true);
+ if (!base)
+ return -ENOMEM;
if (attr->sfunc) {
- have_alarm = pmbus_add_limit_attrs(client, data, info, name,
- index, page, cbase, attr);
+ ret = pmbus_add_limit_attrs(client, data, info, name,
+ index, page, base, attr);
+ if (ret < 0)
+ return ret;
/*
* Add generic alarm attribute only if there are no individual
* alarm attributes, if there is a global alarm bit, and if
* the generic status register for this page is accessible.
*/
- if (!have_alarm && attr->gbit &&
- pmbus_check_byte_register(client, page, PMBUS_STATUS_BYTE))
- pmbus_add_boolean_reg(data, name, "alarm", index,
- PB_STATUS_BASE + page,
- attr->gbit);
+ if (!ret && attr->gbit &&
+ pmbus_check_byte_register(client, page,
+ data->status_register)) {
+ ret = pmbus_add_boolean(data, name, "alarm", index,
+ NULL, NULL,
+ PB_STATUS_BASE + page,
+ attr->gbit);
+ if (ret)
+ return ret;
+ }
}
+ return 0;
}
-static void pmbus_add_sensor_attrs(struct i2c_client *client,
- struct pmbus_data *data,
- const char *name,
- const struct pmbus_sensor_attr *attrs,
- int nattrs)
+static int pmbus_add_sensor_attrs(struct i2c_client *client,
+ struct pmbus_data *data,
+ const char *name,
+ const struct pmbus_sensor_attr *attrs,
+ int nattrs)
{
const struct pmbus_driver_info *info = data->info;
int index, i;
+ int ret;
index = 1;
for (i = 0; i < nattrs; i++) {
@@ -1093,12 +1037,16 @@
for (page = 0; page < pages; page++) {
if (!(info->func[page] & attrs->func))
continue;
- pmbus_add_sensor_attrs_one(client, data, info, name,
- index, page, attrs);
+ ret = pmbus_add_sensor_attrs_one(client, data, info,
+ name, index, page,
+ attrs);
+ if (ret)
+ return ret;
index++;
}
attrs++;
}
+ return 0;
}
static const struct pmbus_limit_attr vin_limit_attrs[] = {
@@ -1140,6 +1088,30 @@
},
};
+static const struct pmbus_limit_attr vmon_limit_attrs[] = {
+ {
+ .reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_VOLTAGE_UV_WARNING,
+ }, {
+ .reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_VOLTAGE_UV_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_VOLTAGE_OV_WARNING,
+ }, {
+ .reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_VOLTAGE_OV_FAULT,
+ }
+};
+
static const struct pmbus_limit_attr vout_limit_attrs[] = {
{
.reg = PMBUS_VOUT_UV_WARN_LIMIT,
@@ -1191,6 +1163,15 @@
.limit = vin_limit_attrs,
.nlimit = ARRAY_SIZE(vin_limit_attrs),
}, {
+ .reg = PMBUS_VIRT_READ_VMON,
+ .class = PSC_VOLTAGE_IN,
+ .label = "vmon",
+ .func = PMBUS_HAVE_VMON,
+ .sfunc = PMBUS_HAVE_STATUS_VMON,
+ .sbase = PB_STATUS_VMON_BASE,
+ .limit = vmon_limit_attrs,
+ .nlimit = ARRAY_SIZE(vmon_limit_attrs),
+ }, {
.reg = PMBUS_READ_VCAP,
.class = PSC_VOLTAGE_IN,
.label = "vcap",
@@ -1553,12 +1534,13 @@
};
/* Fans */
-static void pmbus_add_fan_attributes(struct i2c_client *client,
- struct pmbus_data *data)
+static int pmbus_add_fan_attributes(struct i2c_client *client,
+ struct pmbus_data *data)
{
const struct pmbus_driver_info *info = data->info;
int index = 1;
int page;
+ int ret;
for (page = 0; page < info->pages; page++) {
int f;
@@ -1584,9 +1566,10 @@
(!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
continue;
- pmbus_add_sensor(data, "fan", "input", index, page,
- pmbus_fan_registers[f], PSC_FAN, true,
- true);
+ if (pmbus_add_sensor(data, "fan", "input", index,
+ page, pmbus_fan_registers[f],
+ PSC_FAN, true, true) == NULL)
+ return -ENOMEM;
/*
* Each fan status register covers multiple fans,
@@ -1601,39 +1584,55 @@
base = PB_STATUS_FAN34_BASE + page;
else
base = PB_STATUS_FAN_BASE + page;
- pmbus_add_boolean_reg(data, "fan", "alarm",
- index, base,
+ ret = pmbus_add_boolean(data, "fan",
+ "alarm", index, NULL, NULL, base,
PB_FAN_FAN1_WARNING >> (f & 1));
- pmbus_add_boolean_reg(data, "fan", "fault",
- index, base,
+ if (ret)
+ return ret;
+ ret = pmbus_add_boolean(data, "fan",
+ "fault", index, NULL, NULL, base,
PB_FAN_FAN1_FAULT >> (f & 1));
+ if (ret)
+ return ret;
}
index++;
}
}
+ return 0;
}
-static void pmbus_find_attributes(struct i2c_client *client,
- struct pmbus_data *data)
+static int pmbus_find_attributes(struct i2c_client *client,
+ struct pmbus_data *data)
{
+ int ret;
+
/* Voltage sensors */
- pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
- ARRAY_SIZE(voltage_attributes));
+ ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
+ ARRAY_SIZE(voltage_attributes));
+ if (ret)
+ return ret;
/* Current sensors */
- pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
- ARRAY_SIZE(current_attributes));
+ ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
+ ARRAY_SIZE(current_attributes));
+ if (ret)
+ return ret;
/* Power sensors */
- pmbus_add_sensor_attrs(client, data, "power", power_attributes,
- ARRAY_SIZE(power_attributes));
+ ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes,
+ ARRAY_SIZE(power_attributes));
+ if (ret)
+ return ret;
/* Temperature sensors */
- pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
- ARRAY_SIZE(temp_attributes));
+ ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
+ ARRAY_SIZE(temp_attributes));
+ if (ret)
+ return ret;
/* Fans */
- pmbus_add_fan_attributes(client, data);
+ ret = pmbus_add_fan_attributes(client, data);
+ return ret;
}
/*
@@ -1672,127 +1671,119 @@
}
}
- /* Determine maximum number of sensors, booleans, and labels */
- pmbus_find_max_attr(client, data);
pmbus_clear_fault_page(client, 0);
return 0;
}
-int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
- struct pmbus_driver_info *info)
+static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
+ struct pmbus_driver_info *info)
{
- const struct pmbus_platform_data *pdata = client->dev.platform_data;
- struct pmbus_data *data;
+ struct device *dev = &client->dev;
int ret;
- if (!info) {
- dev_err(&client->dev, "Missing chip information");
- return -ENODEV;
+ /*
+ * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try
+ * to use PMBUS_STATUS_WORD instead if that is the case.
+ * Bail out if both registers are not supported.
+ */
+ data->status_register = PMBUS_STATUS_BYTE;
+ ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
+ if (ret < 0 || ret == 0xff) {
+ data->status_register = PMBUS_STATUS_WORD;
+ ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
+ if (ret < 0 || ret == 0xffff) {
+ dev_err(dev, "PMBus status register not found\n");
+ return -ENODEV;
+ }
}
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
- | I2C_FUNC_SMBUS_BYTE_DATA
- | I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
-
- data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
- if (!data) {
- dev_err(&client->dev, "No memory to allocate driver data\n");
- return -ENOMEM;
- }
-
- i2c_set_clientdata(client, data);
- mutex_init(&data->update_lock);
-
- /* Bail out if PMBus status register does not exist. */
- if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) {
- dev_err(&client->dev, "PMBus status register not found\n");
- return -ENODEV;
- }
-
- if (pdata)
- data->flags = pdata->flags;
- data->info = info;
-
pmbus_clear_faults(client);
if (info->identify) {
ret = (*info->identify)(client, info);
if (ret < 0) {
- dev_err(&client->dev, "Chip identification failed\n");
+ dev_err(dev, "Chip identification failed\n");
return ret;
}
}
if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
- dev_err(&client->dev, "Bad number of PMBus pages: %d\n",
- info->pages);
+ dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages);
return -ENODEV;
}
ret = pmbus_identify_common(client, data);
if (ret < 0) {
- dev_err(&client->dev, "Failed to identify chip capabilities\n");
+ dev_err(dev, "Failed to identify chip capabilities\n");
return ret;
}
+ return 0;
+}
- ret = -ENOMEM;
- data->sensors = devm_kzalloc(&client->dev, sizeof(struct pmbus_sensor)
- * data->max_sensors, GFP_KERNEL);
- if (!data->sensors) {
- dev_err(&client->dev, "No memory to allocate sensor data\n");
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+ struct pmbus_driver_info *info)
+{
+ struct device *dev = &client->dev;
+ const struct pmbus_platform_data *pdata = dev->platform_data;
+ struct pmbus_data *data;
+ int ret;
+
+ if (!info)
+ return -ENODEV;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
return -ENOMEM;
- }
- data->booleans = devm_kzalloc(&client->dev, sizeof(struct pmbus_boolean)
- * data->max_booleans, GFP_KERNEL);
- if (!data->booleans) {
- dev_err(&client->dev, "No memory to allocate boolean data\n");
- return -ENOMEM;
- }
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+ data->dev = dev;
- data->labels = devm_kzalloc(&client->dev, sizeof(struct pmbus_label)
- * data->max_labels, GFP_KERNEL);
- if (!data->labels) {
- dev_err(&client->dev, "No memory to allocate label data\n");
- return -ENOMEM;
- }
+ if (pdata)
+ data->flags = pdata->flags;
+ data->info = info;
- data->attributes = devm_kzalloc(&client->dev, sizeof(struct attribute *)
- * data->max_attributes, GFP_KERNEL);
- if (!data->attributes) {
- dev_err(&client->dev, "No memory to allocate attribute data\n");
- return -ENOMEM;
- }
+ ret = pmbus_init_common(client, data, info);
+ if (ret < 0)
+ return ret;
- pmbus_find_attributes(client, data);
+ ret = pmbus_find_attributes(client, data);
+ if (ret)
+ goto out_kfree;
/*
* If there are no attributes, something is wrong.
* Bail out instead of trying to register nothing.
*/
if (!data->num_attributes) {
- dev_err(&client->dev, "No attributes found\n");
- return -ENODEV;
+ dev_err(dev, "No attributes found\n");
+ ret = -ENODEV;
+ goto out_kfree;
}
/* Register sysfs hooks */
- data->group.attrs = data->attributes;
- ret = sysfs_create_group(&client->dev.kobj, &data->group);
+ ret = sysfs_create_group(&dev->kobj, &data->group);
if (ret) {
- dev_err(&client->dev, "Failed to create sysfs entries\n");
- return ret;
+ dev_err(dev, "Failed to create sysfs entries\n");
+ goto out_kfree;
}
- data->hwmon_dev = hwmon_device_register(&client->dev);
+ data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
- dev_err(&client->dev, "Failed to register hwmon device\n");
+ dev_err(dev, "Failed to register hwmon device\n");
goto out_hwmon_device_register;
}
return 0;
out_hwmon_device_register:
- sysfs_remove_group(&client->dev.kobj, &data->group);
+ sysfs_remove_group(&dev->kobj, &data->group);
+out_kfree:
+ kfree(data->group.attrs);
return ret;
}
EXPORT_SYMBOL_GPL(pmbus_do_probe);
@@ -1802,6 +1793,7 @@
struct pmbus_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->group);
+ kfree(data->group.attrs);
return 0;
}
EXPORT_SYMBOL_GPL(pmbus_do_remove);
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index fc5eed8..8196441 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -2,6 +2,7 @@
* Hardware monitoring driver for ZL6100 and compatibles
*
* Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,12 +46,87 @@
#define ZL6100_MFR_XTEMP_ENABLE (1 << 7)
+#define MFR_VMON_OV_FAULT_LIMIT 0xf5
+#define MFR_VMON_UV_FAULT_LIMIT 0xf6
+#define MFR_READ_VMON 0xf7
+
+#define VMON_UV_WARNING (1 << 5)
+#define VMON_OV_WARNING (1 << 4)
+#define VMON_UV_FAULT (1 << 1)
+#define VMON_OV_FAULT (1 << 0)
+
#define ZL6100_WAIT_TIME 1000 /* uS */
static ushort delay = ZL6100_WAIT_TIME;
module_param(delay, ushort, 0644);
MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+ s16 exponent;
+ s32 mantissa;
+ long val;
+
+ exponent = l >> 11;
+ mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+ val = mantissa;
+
+ /* scale result to milli-units */
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+#define MAX_MANTISSA (1023 * 1000)
+#define MIN_MANTISSA (511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+ s16 exponent = 0, mantissa;
+ bool negative = false;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (val < 0) {
+ negative = true;
+ val = -val;
+ }
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val >= MAX_MANTISSA && exponent < 15) {
+ exponent++;
+ val >>= 1;
+ }
+ /* Increase small mantissa to improve precision */
+ while (val < MIN_MANTISSA && exponent > -15) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /* Ensure that resulting number is within range */
+ if (mantissa > 0x3ff)
+ mantissa = 0x3ff;
+
+ /* restore sign */
+ if (negative)
+ mantissa = -mantissa;
+
+ /* Convert to 5 bit exponent, 11 bit mantissa */
+ return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
/* Some chips need a delay between accesses */
static inline void zl6100_wait(const struct zl6100_data *data)
{
@@ -65,9 +141,9 @@
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, vreg;
- if (page || reg >= PMBUS_VIRT_BASE)
+ if (page > 0)
return -ENXIO;
if (data->id == zl2005) {
@@ -83,9 +159,39 @@
}
}
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ vreg = MFR_READ_VMON;
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ break;
+ }
+
zl6100_wait(data);
- ret = pmbus_read_word_data(client, page, reg);
+ ret = pmbus_read_word_data(client, page, vreg);
data->access = ktime_get();
+ if (ret < 0)
+ return ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+ break;
+ }
return ret;
}
@@ -94,13 +200,35 @@
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, status;
if (page > 0)
return -ENXIO;
zl6100_wait(data);
- ret = pmbus_read_byte_data(client, page, reg);
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+
+ status = 0;
+ if (ret & VMON_UV_WARNING)
+ status |= PB_VOLTAGE_UV_WARNING;
+ if (ret & VMON_OV_WARNING)
+ status |= PB_VOLTAGE_OV_WARNING;
+ if (ret & VMON_UV_FAULT)
+ status |= PB_VOLTAGE_UV_FAULT;
+ if (ret & VMON_OV_FAULT)
+ status |= PB_VOLTAGE_OV_FAULT;
+ ret = status;
+ break;
+ default:
+ ret = pmbus_read_byte_data(client, page, reg);
+ break;
+ }
data->access = ktime_get();
return ret;
@@ -111,13 +239,38 @@
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, vreg;
- if (page || reg >= PMBUS_VIRT_BASE)
+ if (page > 0)
return -ENXIO;
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ }
+
zl6100_wait(data);
- ret = pmbus_write_word_data(client, page, reg, word);
+ ret = pmbus_write_word_data(client, page, vreg, word);
data->access = ktime_get();
return ret;
@@ -225,6 +378,13 @@
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ /*
+ * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
+ * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+ */
+ if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+ info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
if (ret < 0)
return ret;
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 1c85d39..bfe326e 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -139,12 +139,12 @@
* @reg: associated regulator (if specified).
* @nb: notifier block to handle notifications of voltage
* changes.
- * @supply_uV: local copy of supply voltage used to allow use of
+ * @supply_uv: local copy of supply voltage used to allow use of
* regulator consumer if available.
- * @supply_uV_valid: indicates that an updated value has not yet been
+ * @supply_uv_valid: indicates that an updated value has not yet been
* obtained from the regulator and so any calculations
* based upon it will be invalid.
- * @update_supply_work: work struct that is used to update the supply_uV.
+ * @update_supply_work: work struct that is used to update the supply_uv.
* @interrupt_handled: flag used to indicate a handler has been scheduled.
*/
struct sht15_data {
@@ -166,8 +166,8 @@
struct device *hwmon_dev;
struct regulator *reg;
struct notifier_block nb;
- int supply_uV;
- bool supply_uV_valid;
+ int supply_uv;
+ bool supply_uv_valid;
struct work_struct update_supply_work;
atomic_t interrupt_handled;
};
@@ -212,11 +212,13 @@
*
* This implements section 3.4 of the data sheet
*/
-static void sht15_connection_reset(struct sht15_data *data)
+static int sht15_connection_reset(struct sht15_data *data)
{
- int i;
+ int i, err;
- gpio_direction_output(data->pdata->gpio_data, 1);
+ err = gpio_direction_output(data->pdata->gpio_data, 1);
+ if (err)
+ return err;
ndelay(SHT15_TSCKL);
gpio_set_value(data->pdata->gpio_sck, 0);
ndelay(SHT15_TSCKL);
@@ -226,6 +228,7 @@
gpio_set_value(data->pdata->gpio_sck, 0);
ndelay(SHT15_TSCKL);
}
+ return 0;
}
/**
@@ -251,10 +254,14 @@
* conservative ones used in implementation. This implements
* figure 12 on the data sheet.
*/
-static void sht15_transmission_start(struct sht15_data *data)
+static int sht15_transmission_start(struct sht15_data *data)
{
+ int err;
+
/* ensure data is high and output */
- gpio_direction_output(data->pdata->gpio_data, 1);
+ err = gpio_direction_output(data->pdata->gpio_data, 1);
+ if (err)
+ return err;
ndelay(SHT15_TSU);
gpio_set_value(data->pdata->gpio_sck, 0);
ndelay(SHT15_TSCKL);
@@ -270,6 +277,7 @@
ndelay(SHT15_TSU);
gpio_set_value(data->pdata->gpio_sck, 0);
ndelay(SHT15_TSCKL);
+ return 0;
}
/**
@@ -293,13 +301,19 @@
*/
static int sht15_wait_for_response(struct sht15_data *data)
{
- gpio_direction_input(data->pdata->gpio_data);
+ int err;
+
+ err = gpio_direction_input(data->pdata->gpio_data);
+ if (err)
+ return err;
gpio_set_value(data->pdata->gpio_sck, 1);
ndelay(SHT15_TSCKH);
if (gpio_get_value(data->pdata->gpio_data)) {
gpio_set_value(data->pdata->gpio_sck, 0);
dev_err(data->dev, "Command not acknowledged\n");
- sht15_connection_reset(data);
+ err = sht15_connection_reset(data);
+ if (err)
+ return err;
return -EIO;
}
gpio_set_value(data->pdata->gpio_sck, 0);
@@ -317,12 +331,13 @@
*/
static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
{
- int ret = 0;
+ int err;
- sht15_transmission_start(data);
+ err = sht15_transmission_start(data);
+ if (err)
+ return err;
sht15_send_byte(data, cmd);
- ret = sht15_wait_for_response(data);
- return ret;
+ return sht15_wait_for_response(data);
}
/**
@@ -352,9 +367,13 @@
* Each byte of data is acknowledged by pulling the data line
* low for one clock pulse.
*/
-static void sht15_ack(struct sht15_data *data)
+static int sht15_ack(struct sht15_data *data)
{
- gpio_direction_output(data->pdata->gpio_data, 0);
+ int err;
+
+ err = gpio_direction_output(data->pdata->gpio_data, 0);
+ if (err)
+ return err;
ndelay(SHT15_TSU);
gpio_set_value(data->pdata->gpio_sck, 1);
ndelay(SHT15_TSU);
@@ -362,7 +381,7 @@
ndelay(SHT15_TSU);
gpio_set_value(data->pdata->gpio_data, 1);
- gpio_direction_input(data->pdata->gpio_data);
+ return gpio_direction_input(data->pdata->gpio_data);
}
/**
@@ -371,14 +390,19 @@
*
* This is basically a NAK (single clock pulse, data high).
*/
-static void sht15_end_transmission(struct sht15_data *data)
+static int sht15_end_transmission(struct sht15_data *data)
{
- gpio_direction_output(data->pdata->gpio_data, 1);
+ int err;
+
+ err = gpio_direction_output(data->pdata->gpio_data, 1);
+ if (err)
+ return err;
ndelay(SHT15_TSU);
gpio_set_value(data->pdata->gpio_sck, 1);
ndelay(SHT15_TSCKH);
gpio_set_value(data->pdata->gpio_sck, 0);
ndelay(SHT15_TSCKL);
+ return 0;
}
/**
@@ -410,17 +434,19 @@
*/
static int sht15_send_status(struct sht15_data *data, u8 status)
{
- int ret;
+ int err;
- ret = sht15_send_cmd(data, SHT15_WRITE_STATUS);
- if (ret)
- return ret;
- gpio_direction_output(data->pdata->gpio_data, 1);
+ err = sht15_send_cmd(data, SHT15_WRITE_STATUS);
+ if (err)
+ return err;
+ err = gpio_direction_output(data->pdata->gpio_data, 1);
+ if (err)
+ return err;
ndelay(SHT15_TSU);
sht15_send_byte(data, status);
- ret = sht15_wait_for_response(data);
- if (ret)
- return ret;
+ err = sht15_wait_for_response(data);
+ if (err)
+ return err;
data->val_status = status;
return 0;
@@ -446,7 +472,7 @@
|| !data->status_valid) {
ret = sht15_send_cmd(data, SHT15_READ_STATUS);
if (ret)
- goto error_ret;
+ goto unlock;
status = sht15_read_byte(data);
if (data->checksumming) {
@@ -458,7 +484,9 @@
== dev_checksum);
}
- sht15_end_transmission(data);
+ ret = sht15_end_transmission(data);
+ if (ret)
+ goto unlock;
/*
* Perform checksum validation on the received data.
@@ -469,27 +497,27 @@
previous_config = data->val_status & 0x07;
ret = sht15_soft_reset(data);
if (ret)
- goto error_ret;
+ goto unlock;
if (previous_config) {
ret = sht15_send_status(data, previous_config);
if (ret) {
dev_err(data->dev,
"CRC validation failed, unable "
"to restore device settings\n");
- goto error_ret;
+ goto unlock;
}
}
ret = -EAGAIN;
- goto error_ret;
+ goto unlock;
}
data->val_status = status;
data->status_valid = true;
data->last_status = jiffies;
}
-error_ret:
- mutex_unlock(&data->read_lock);
+unlock:
+ mutex_unlock(&data->read_lock);
return ret;
}
@@ -511,7 +539,9 @@
if (ret)
return ret;
- gpio_direction_input(data->pdata->gpio_data);
+ ret = gpio_direction_input(data->pdata->gpio_data);
+ if (ret)
+ return ret;
atomic_set(&data->interrupt_handled, 0);
enable_irq(gpio_to_irq(data->pdata->gpio_data));
@@ -524,9 +554,14 @@
ret = wait_event_timeout(data->wait_queue,
(data->state == SHT15_READING_NOTHING),
msecs_to_jiffies(timeout_msecs));
- if (ret == 0) {/* timeout occurred */
+ if (data->state != SHT15_READING_NOTHING) { /* I/O error occurred */
+ data->state = SHT15_READING_NOTHING;
+ return -EIO;
+ } else if (ret == 0) { /* timeout occurred */
disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
- sht15_connection_reset(data);
+ ret = sht15_connection_reset(data);
+ if (ret)
+ return ret;
return -ETIME;
}
@@ -570,17 +605,17 @@
data->state = SHT15_READING_HUMID;
ret = sht15_measurement(data, SHT15_MEASURE_RH, 160);
if (ret)
- goto error_ret;
+ goto unlock;
data->state = SHT15_READING_TEMP;
ret = sht15_measurement(data, SHT15_MEASURE_TEMP, 400);
if (ret)
- goto error_ret;
+ goto unlock;
data->measurements_valid = true;
data->last_measurement = jiffies;
}
-error_ret:
- mutex_unlock(&data->read_lock);
+unlock:
+ mutex_unlock(&data->read_lock);
return ret;
}
@@ -598,8 +633,8 @@
for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--)
/* Find pointer to interpolate */
- if (data->supply_uV > temppoints[i - 1].vdd) {
- d1 = (data->supply_uV - temppoints[i - 1].vdd)
+ if (data->supply_uv > temppoints[i - 1].vdd) {
+ d1 = (data->supply_uv - temppoints[i - 1].vdd)
* (temppoints[i].d1 - temppoints[i - 1].d1)
/ (temppoints[i].vdd - temppoints[i - 1].vdd)
+ temppoints[i - 1].d1;
@@ -818,7 +853,8 @@
/* Read the data back from the device */
val = sht15_read_byte(data);
val <<= 8;
- sht15_ack(data);
+ if (sht15_ack(data))
+ goto wakeup;
val |= sht15_read_byte(data);
if (data->checksumming) {
@@ -826,7 +862,8 @@
* Ask the device for a checksum and read it back.
* Note: the device sends the checksum byte reversed.
*/
- sht15_ack(data);
+ if (sht15_ack(data))
+ goto wakeup;
dev_checksum = sht15_reverse(sht15_read_byte(data));
checksum_vals[0] = (data->state == SHT15_READING_TEMP) ?
SHT15_MEASURE_TEMP : SHT15_MEASURE_RH;
@@ -837,7 +874,8 @@
}
/* Tell the device we are done */
- sht15_end_transmission(data);
+ if (sht15_end_transmission(data))
+ goto wakeup;
switch (data->state) {
case SHT15_READING_TEMP:
@@ -851,6 +889,7 @@
}
data->state = SHT15_READING_NOTHING;
+wakeup:
wake_up(&data->wait_queue);
}
@@ -859,7 +898,7 @@
struct sht15_data *data
= container_of(work_s, struct sht15_data,
update_supply_work);
- data->supply_uV = regulator_get_voltage(data->reg);
+ data->supply_uv = regulator_get_voltage(data->reg);
}
/**
@@ -878,7 +917,7 @@
struct sht15_data *data = container_of(nb, struct sht15_data, nb);
if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
- data->supply_uV_valid = false;
+ data->supply_uv_valid = false;
schedule_work(&data->update_supply_work);
return NOTIFY_OK;
@@ -906,7 +945,7 @@
return -EINVAL;
}
data->pdata = pdev->dev.platform_data;
- data->supply_uV = data->pdata->supply_mv * 1000;
+ data->supply_uv = data->pdata->supply_mv * 1000;
if (data->pdata->checksum)
data->checksumming = true;
if (data->pdata->no_otp_reload)
@@ -924,7 +963,7 @@
voltage = regulator_get_voltage(data->reg);
if (voltage)
- data->supply_uV = voltage;
+ data->supply_uv = voltage;
regulator_enable(data->reg);
/*
@@ -942,17 +981,17 @@
}
/* Try requesting the GPIOs */
- ret = devm_gpio_request(&pdev->dev, data->pdata->gpio_sck, "SHT15 sck");
+ ret = devm_gpio_request_one(&pdev->dev, data->pdata->gpio_sck,
+ GPIOF_OUT_INIT_LOW, "SHT15 sck");
if (ret) {
- dev_err(&pdev->dev, "gpio request failed\n");
+ dev_err(&pdev->dev, "clock line GPIO request failed\n");
goto err_release_reg;
}
- gpio_direction_output(data->pdata->gpio_sck, 0);
ret = devm_gpio_request(&pdev->dev, data->pdata->gpio_data,
"SHT15 data");
if (ret) {
- dev_err(&pdev->dev, "gpio request failed\n");
+ dev_err(&pdev->dev, "data line GPIO request failed\n");
goto err_release_reg;
}
@@ -966,7 +1005,9 @@
goto err_release_reg;
}
disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
- sht15_connection_reset(data);
+ ret = sht15_connection_reset(data);
+ if (ret)
+ goto err_release_reg;
ret = sht15_soft_reset(data);
if (ret)
goto err_release_reg;
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 06ce3c9..c35847a 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -132,7 +132,7 @@
*/
static inline u8 IN_TO_REG(unsigned long val)
{
- unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+ unsigned long nval = clamp_val(val, 0, 4080);
return (nval + 8) / 16;
}
#define IN_FROM_REG(val) ((val) * 16)
@@ -141,7 +141,7 @@
{
if (rpm <= 0)
return 255;
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline int FAN_FROM_REG(u8 val, int div)
@@ -159,7 +159,7 @@
}
static inline s8 TEMP_TO_REG(int val)
{
- int nval = SENSORS_LIMIT(val, -54120, 157530) ;
+ int nval = clamp_val(val, -54120, 157530) ;
return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830;
}
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index dba0c56..6d8255c 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -326,7 +326,7 @@
/* Preserve fan min */
tmp = 192 - (old_div * (192 - data->fan_preload[nr])
+ new_div / 2) / new_div;
- data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
+ data->fan_preload[nr] = clamp_val(tmp, 0, 191);
smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
data->fan_preload[nr]);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 36a3478..efee4c5 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -77,7 +77,7 @@
static inline u8 IN_TO_REG(unsigned long val, int n)
{
- return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255);
+ return clamp_val(SCALE(val, 192, nom_mv[n]), 0, 255);
}
/*
@@ -86,7 +86,7 @@
*/
static inline s8 TEMP_TO_REG(int val)
{
- return SENSORS_LIMIT(SCALE(val, 1, 1000), -128000, 127000);
+ return clamp_val(SCALE(val, 1, 1000), -128000, 127000);
}
static inline int TEMP_FROM_REG(s8 val)
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 3c2c48d..4b59eb5 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -134,7 +134,7 @@
return err;
mutex_lock(&data->update_lock);
- data->analog_out = SENSORS_LIMIT(tmp, 0, 255);
+ data->analog_out = clamp_val(tmp, 0, 255);
i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
data->analog_out);
@@ -187,7 +187,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
+ data->temp_min[nr] = clamp_val(val / 1000, -128, 127);
i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
data->temp_min[nr]);
mutex_unlock(&data->update_lock);
@@ -216,7 +216,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
+ data->temp_max[nr] = clamp_val(val / 1000, -128, 127);
i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
data->temp_max[nr]);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index b10c3d3..523dd89 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -115,7 +115,7 @@
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
- val = SENSORS_LIMIT(val, -256000, 255000);
+ val = clamp_val(val, -256000, 255000);
mutex_lock(&tmp102->lock);
tmp102->temp[sda->index] = val;
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index e620548..c85f696 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -142,10 +142,10 @@
static u16 tmp401_temp_to_register(long temp, u8 config)
{
if (config & TMP401_CONFIG_RANGE) {
- temp = SENSORS_LIMIT(temp, -64000, 191000);
+ temp = clamp_val(temp, -64000, 191000);
temp += 64000;
} else
- temp = SENSORS_LIMIT(temp, 0, 127000);
+ temp = clamp_val(temp, 0, 127000);
return (temp * 160 + 312) / 625;
}
@@ -163,10 +163,10 @@
static u8 tmp401_crit_temp_to_register(long temp, u8 config)
{
if (config & TMP401_CONFIG_RANGE) {
- temp = SENSORS_LIMIT(temp, -64000, 191000);
+ temp = clamp_val(temp, -64000, 191000);
temp += 64000;
} else
- temp = SENSORS_LIMIT(temp, 0, 127000);
+ temp = clamp_val(temp, 0, 127000);
return (temp + 500) / 1000;
}
@@ -417,14 +417,14 @@
return -EINVAL;
if (data->config & TMP401_CONFIG_RANGE)
- val = SENSORS_LIMIT(val, -64000, 191000);
+ val = clamp_val(val, -64000, 191000);
else
- val = SENSORS_LIMIT(val, 0, 127000);
+ val = clamp_val(val, 0, 127000);
mutex_lock(&data->update_lock);
temp = tmp401_crit_register_to_temp(data->temp_crit[index],
data->config);
- val = SENSORS_LIMIT(val, temp - 255000, temp);
+ val = clamp_val(val, temp - 255000, temp);
reg = ((temp - val) + 500) / 1000;
i2c_smbus_write_byte_data(to_i2c_client(dev),
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index e0e14a9..3123b30 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -135,17 +135,14 @@
* for the constants.
*/
if (inNum <= 1)
- return (u8)
- SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255);
+ return (u8) clamp_val((val * 21024 - 1205000) / 250000, 0, 255);
else if (inNum == 2)
- return (u8)
- SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255);
+ return (u8) clamp_val((val * 15737 - 1205000) / 250000, 0, 255);
else if (inNum == 3)
- return (u8)
- SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255);
+ return (u8) clamp_val((val * 10108 - 1205000) / 250000, 0, 255);
else
- return (u8)
- SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255);
+ return (u8) clamp_val((val * 41714 - 12050000) / 2500000, 0,
+ 255);
}
static inline long IN_FROM_REG(u8 val, int inNum)
@@ -175,8 +172,8 @@
{
if (rpm == 0)
return 0;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (val) == 255 ? 0 : 1350000 / \
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index 7517030..dcc62f8 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -158,7 +158,7 @@
#define IN_FROM_REG(ix, reg) ((reg) < 3 ? 0 : (ix) == 5 ? \
(((reg) - 3) * 15882 + 479) / 958 : \
(((reg) - 3) * 10000 + 479) / 958)
-#define IN_TO_REG(ix, val) (SENSORS_LIMIT((ix) == 5 ? \
+#define IN_TO_REG(ix, val) (clamp_val((ix) == 5 ? \
((val) * 958 + 7941) / 15882 + 3 : \
((val) * 958 + 5000) / 10000 + 3, 0, 255))
@@ -173,7 +173,7 @@
(ix) == 1 ? (reg) < 51 ? 0 : \
((reg) - 51) * 1000 : \
((253 - (reg)) * 2200 + 105) / 210)
-#define TEMP_TO_REG(ix, val) SENSORS_LIMIT( \
+#define TEMP_TO_REG(ix, val) clamp_val( \
((ix) == 0 ? ((val) + 500) / 1000 : \
(ix) == 1 ? ((val) + 500) / 1000 + 51 : \
253 - ((val) * 210 + 1100) / 2200), 0, 255)
@@ -183,7 +183,7 @@
#define RPM_FROM_REG(reg, div) (((reg) == 0) || ((reg) == 255) ? 0 : \
1310720 / (reg) / DIV_FROM_REG(div))
#define RPM_TO_REG(val, div) ((val) == 0 ? 255 : \
- SENSORS_LIMIT((1310720 / (val) / \
+ clamp_val((1310720 / (val) / \
DIV_FROM_REG(div)), 1, 254))
/* ---------------------------------------------------------------------
@@ -687,7 +687,7 @@
data->fan_ctl));
break;
case SHOW_SET_PWM_FREQ:
- val = 135000 / SENSORS_LIMIT(val, 135000 >> 7, 135000);
+ val = 135000 / clamp_val(val, 135000 >> 7, 135000);
/* calculate tmp = log2(val) */
tmp = 0;
for (val >>= 1; val > 0; val >>= 1)
@@ -845,7 +845,7 @@
return err;
mutex_lock(&data->update_lock);
- data->pwm_auto_pwm[ix][ap] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm_auto_pwm[ix][ap] = clamp_val(val, 0, 255);
vt1211_write8(data, VT1211_REG_PWM_AUTO_PWM(ix, ap),
data->pwm_auto_pwm[ix][ap]);
mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index a56355c..988a2a7 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -147,7 +147,7 @@
{
if (rpm == 0)
return 0;
- return SENSORS_LIMIT(1310720 / (rpm * div), 1, 255);
+ return clamp_val(1310720 / (rpm * div), 1, 255);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
@@ -236,7 +236,7 @@
return err;
mutex_lock(&data->update_lock);
- data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ data->in_min[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
vt8231_write_value(data, regvoltmin[nr], data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -256,7 +256,7 @@
return err;
mutex_lock(&data->update_lock);
- data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ data->in_max[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
vt8231_write_value(data, regvoltmax[nr], data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -302,8 +302,8 @@
return err;
mutex_lock(&data->update_lock);
- data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
- 0, 255);
+ data->in_min[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
vt8231_write_value(data, regvoltmin[5], data->in_min[5]);
mutex_unlock(&data->update_lock);
return count;
@@ -321,8 +321,8 @@
return err;
mutex_lock(&data->update_lock);
- data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
- 0, 255);
+ data->in_max[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
vt8231_write_value(data, regvoltmax[5], data->in_max[5]);
mutex_unlock(&data->update_lock);
return count;
@@ -380,7 +380,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ data->temp_max[0] = clamp_val((val + 500) / 1000, 0, 255);
vt8231_write_value(data, regtempmax[0], data->temp_max[0]);
mutex_unlock(&data->update_lock);
return count;
@@ -397,7 +397,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ data->temp_min[0] = clamp_val((val + 500) / 1000, 0, 255);
vt8231_write_value(data, regtempmin[0], data->temp_min[0]);
mutex_unlock(&data->update_lock);
return count;
@@ -444,7 +444,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ data->temp_max[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
vt8231_write_value(data, regtempmax[nr], data->temp_max[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -463,7 +463,7 @@
return err;
mutex_lock(&data->update_lock);
- data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ data->temp_min[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
vt8231_write_value(data, regtempmin[nr], data->temp_min[nr]);
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 0e8ffd6..0a89211 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -354,8 +354,8 @@
static inline u8 step_time_to_reg(unsigned int msec, u8 mode)
{
- return SENSORS_LIMIT((mode ? (msec + 50) / 100 :
- (msec + 200) / 400), 1, 255);
+ return clamp_val((mode ? (msec + 50) / 100 : (msec + 200) / 400),
+ 1, 255);
}
static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
@@ -414,8 +414,7 @@
static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
{
- return SENSORS_LIMIT(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0,
- 255);
+ return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255);
}
/*
@@ -1267,7 +1266,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
mutex_lock(&data->update_lock);
data->temp_offset[nr] = val;
@@ -1435,7 +1434,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm[nr] = val;
@@ -1514,7 +1513,7 @@
if (err < 0)
return err;
- val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 127);
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 127);
mutex_lock(&data->update_lock);
data->target_temp[nr] = val;
@@ -1540,7 +1539,7 @@
return err;
/* Limit the temp to 0C - 15C */
- val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 15);
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15);
mutex_lock(&data->update_lock);
if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
@@ -1639,7 +1638,7 @@
err = kstrtoul(buf, 10, &val); \
if (err < 0) \
return err; \
- val = SENSORS_LIMIT(val, 1, 255); \
+ val = clamp_val(val, 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
w83627ehf_write_value(data, data->REG_##REG[nr], val); \
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 81f4865..3b9ef2d 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -254,16 +254,15 @@
* these macros are called: arguments may be evaluated more than once.
* Fixing this is just not worth it.
*/
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_TO_REG(val) (clamp_val((((val) + 8) / 16), 0, 255))
#define IN_FROM_REG(val) ((val) * 16)
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
- 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
#define TEMP_MIN (-128000)
@@ -275,9 +274,9 @@
*/
static u8 TEMP_TO_REG(long temp)
{
- int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
- ntemp += (ntemp<0 ? -500 : 500);
- return (u8)(ntemp / 1000);
+ int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX);
+ ntemp += (ntemp < 0 ? -500 : 500);
+ return (u8)(ntemp / 1000);
}
static int TEMP_FROM_REG(u8 reg)
@@ -287,7 +286,7 @@
#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
-#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+#define PWM_TO_REG(val) (clamp_val((val), 0, 255))
static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
{
@@ -342,7 +341,7 @@
static inline u8 DIV_TO_REG(long val)
{
int i;
- val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ val = clamp_val(val, 1, 128) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -614,8 +613,7 @@
/* use VRM9 calculation */
data->in_min[0] =
- SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
- 255);
+ clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
else
/* use VRM8 (standard) calculation */
data->in_min[0] = IN_TO_REG(val);
@@ -644,8 +642,7 @@
/* use VRM9 calculation */
data->in_max[0] =
- SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
- 255);
+ clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
else
/* use VRM8 (standard) calculation */
data->in_max[0] = IN_TO_REG(val);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 93bd286..aeec5b1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -159,7 +159,7 @@
#define W83781D_DEFAULT_BETA 3435
/* Conversions */
-#define IN_TO_REG(val) SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
+#define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255)
#define IN_FROM_REG(val) ((val) * 16)
static inline u8
@@ -167,8 +167,8 @@
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline long
@@ -181,7 +181,7 @@
return 1350000 / (val * div);
}
-#define TEMP_TO_REG(val) SENSORS_LIMIT((val) / 1000, -127, 128)
+#define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128)
#define TEMP_FROM_REG(val) ((val) * 1000)
#define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \
@@ -195,9 +195,8 @@
DIV_TO_REG(long val, enum chips type)
{
int i;
- val = SENSORS_LIMIT(val, 1,
- ((type == w83781d
- || type == as99127f) ? 8 : 128)) >> 1;
+ val = clamp_val(val, 1,
+ ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -443,7 +442,7 @@
err = kstrtoul(buf, 10, &val);
if (err)
return err;
- data->vrm = SENSORS_LIMIT(val, 0, 255);
+ data->vrm = clamp_val(val, 0, 255);
return count;
}
@@ -730,7 +729,7 @@
return err;
mutex_lock(&data->update_lock);
- data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm[nr] = clamp_val(val, 0, 255);
w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index ed397c6..38ddddd 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -220,15 +220,15 @@
* in mV as would be measured on the chip input pin, need to just
* multiply/divide by 16 to translate from/to register values.
*/
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8) / 16), 0, 255))
+#define IN_TO_REG(val) (clamp_val((((val) + 8) / 16), 0, 255))
#define IN_FROM_REG(val) ((val) * 16)
static u8 fan_to_reg(long rpm, int div)
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \
@@ -273,7 +273,7 @@
int i;
/* fan divisors max out at 128 */
- val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ val = clamp_val(val, 1, 128) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -747,7 +747,7 @@
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm[nr] = clamp_val(val, 0, 255);
w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]);
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 301942d..5cb83dd 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -235,8 +235,8 @@
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \
@@ -244,16 +244,15 @@
1350000 / ((val) * (div))))
/* for temp1 */
-#define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
- : (val)) / 1000, 0, 0xff))
+#define TEMP1_TO_REG(val) (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 \
+ : (val)) / 1000, 0, 0xff))
#define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
/* for temp2 and temp3, because they need additional resolution */
#define TEMP_ADD_FROM_REG(val1, val2) \
((((val1) & 0x80 ? (val1)-0x100 \
: (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
#define TEMP_ADD_TO_REG_HIGH(val) \
- (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
- : (val)) / 1000, 0, 0xff))
+ (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 : (val)) / 1000, 0, 0xff))
#define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00)
#define DIV_FROM_REG(val) (1 << (val))
@@ -262,7 +261,7 @@
DIV_TO_REG(long val)
{
int i;
- val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ val = clamp_val(val, 1, 128) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -397,7 +396,7 @@
if (err) \
return err; \
mutex_lock(&data->update_lock); \
- data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val) / 4, 0, 255); \
+ data->in_##reg[nr] = clamp_val(IN_TO_REG(nr, val) / 4, 0, 255); \
w83792d_write_value(client, W83792D_REG_IN_##REG[nr], \
data->in_##reg[nr]); \
mutex_unlock(&data->update_lock); \
@@ -645,7 +644,7 @@
err = kstrtoul(buf, 10, &val);
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 255) >> 4;
+ val = clamp_val(val, 0, 255) >> 4;
mutex_lock(&data->update_lock);
val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0;
@@ -799,7 +798,7 @@
mutex_lock(&data->update_lock);
target_mask = w83792d_read_value(client,
W83792D_REG_THERMAL[nr]) & 0x80;
- data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255);
+ data->thermal_cruise[nr] = clamp_val(target_tmp, 0, 255);
w83792d_write_value(client, W83792D_REG_THERMAL[nr],
(data->thermal_cruise[nr]) | target_mask);
mutex_unlock(&data->update_lock);
@@ -837,7 +836,7 @@
mutex_lock(&data->update_lock);
tol_mask = w83792d_read_value(client,
W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
- tol_tmp = SENSORS_LIMIT(val, 0, 15);
+ tol_tmp = clamp_val(val, 0, 15);
tol_tmp &= 0x0f;
data->tolerance[nr] = tol_tmp;
if (nr == 1)
@@ -881,7 +880,7 @@
return err;
mutex_lock(&data->update_lock);
- data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127);
+ data->sf2_points[index][nr] = clamp_val(val, 0, 127);
mask_tmp = w83792d_read_value(client,
W83792D_REG_POINTS[index][nr]) & 0x80;
w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
@@ -923,7 +922,7 @@
return err;
mutex_lock(&data->update_lock);
- data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15);
+ data->sf2_levels[index][nr] = clamp_val((val * 15) / 100, 0, 15);
mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
& ((nr == 3) ? 0xf0 : 0x0f);
if (nr == 3)
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 99799fd..6604275 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -191,7 +191,7 @@
{
if (rpm <= 0)
return 0x0fff;
- return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+ return clamp_val((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
}
static inline unsigned long TIME_FROM_REG(u8 reg)
@@ -201,7 +201,7 @@
static inline u8 TIME_TO_REG(unsigned long val)
{
- return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+ return clamp_val((val + 50) / 100, 0, 0xff);
}
static inline long TEMP_FROM_REG(s8 reg)
@@ -211,7 +211,7 @@
static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
{
- return SENSORS_LIMIT((val + (val < 0 ? -500 : 500)) / 1000, min, max);
+ return clamp_val((val + (val < 0 ? -500 : 500)) / 1000, min, max);
}
struct w83793_data {
@@ -558,7 +558,7 @@
w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index),
val);
} else {
- val = SENSORS_LIMIT(val, 0, 0xff) >> 2;
+ val = clamp_val(val, 0, 0xff) >> 2;
data->pwm[index][nr] =
w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0;
data->pwm[index][nr] |= val;
@@ -739,7 +739,7 @@
if (nr == SETUP_PWM_DEFAULT) {
data->pwm_default =
w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0;
- data->pwm_default |= SENSORS_LIMIT(val, 0, 0xff) >> 2;
+ data->pwm_default |= clamp_val(val, 0, 0xff) >> 2;
w83793_write_value(client, W83793_REG_PWM_DEFAULT,
data->pwm_default);
} else if (nr == SETUP_PWM_UPTIME) {
@@ -838,7 +838,7 @@
mutex_lock(&data->update_lock);
if (nr == TEMP_FAN_MAP) {
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val);
data->temp_fan_map[index] = val;
} else if (nr == TEMP_PWM_ENABLE) {
@@ -907,7 +907,7 @@
err = kstrtoul(buf, 10, &val);
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 0xff) >> 2;
+ val = clamp_val(val, 0, 0xff) >> 2;
mutex_lock(&data->update_lock);
data->sf2_pwm[index][nr] =
@@ -1003,9 +1003,9 @@
/* fix the limit values of 5VDD and 5VSB to ALARM mechanism */
if (nr == 1 || nr == 2)
val -= scale_in_add[index] / scale_in[index];
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
} else {
- val = SENSORS_LIMIT(val, 0, 0x3FF);
+ val = clamp_val(val, 0, 0x3FF);
data->in_low_bits[nr] =
w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
data->in_low_bits[nr] &= ~(0x03 << (2 * index));
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 55a4f48..e226096 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -262,7 +262,7 @@
{
if (rpm <= 0)
return 0x0fff;
- return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+ return clamp_val((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
}
static inline unsigned long time_from_reg(u8 reg)
@@ -272,7 +272,7 @@
static inline u8 time_to_reg(unsigned long val)
{
- return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+ return clamp_val((val + 50) / 100, 0, 0xff);
}
static inline long temp_from_reg(s8 reg)
@@ -282,7 +282,7 @@
static inline s8 temp_to_reg(long val, s8 min, s8 max)
{
- return SENSORS_LIMIT(val / 1000, min, max);
+ return clamp_val(val / 1000, min, max);
}
static const u16 pwm_freq_cksel0[16] = {
@@ -319,7 +319,7 @@
/* Best fit for cksel = 1 */
base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
- reg1 = SENSORS_LIMIT(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
+ reg1 = clamp_val(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
best1 = base_clock / reg1;
reg1 = 0x80 | (reg1 - 1);
@@ -889,7 +889,7 @@
val = pwm_freq_to_reg(val, data->clkin);
break;
default:
- val = SENSORS_LIMIT(val, 0, 0xff);
+ val = clamp_val(val, 0, 0xff);
break;
}
w83795_write(client, W83795_REG_PWM(index, nr), val);
@@ -1126,7 +1126,7 @@
break;
case TEMP_PWM_FAN_MAP:
mutex_lock(&data->update_lock);
- tmp = SENSORS_LIMIT(tmp, 0, 0xff);
+ tmp = clamp_val(tmp, 0, 0xff);
w83795_write(client, W83795_REG_TFMR(index), tmp);
data->pwm_tfmr[index] = tmp;
mutex_unlock(&data->update_lock);
@@ -1177,13 +1177,13 @@
mutex_lock(&data->update_lock);
switch (nr) {
case FANIN_TARGET:
- val = fan_to_reg(SENSORS_LIMIT(val, 0, 0xfff));
+ val = fan_to_reg(clamp_val(val, 0, 0xfff));
w83795_write(client, W83795_REG_FTSH(index), val >> 4);
w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
data->target_speed[index] = val;
break;
case FANIN_TOL:
- val = SENSORS_LIMIT(val, 0, 0x3f);
+ val = clamp_val(val, 0, 0x3f);
w83795_write(client, W83795_REG_TFTS, val);
data->tol_speed = val;
break;
@@ -1227,22 +1227,22 @@
mutex_lock(&data->update_lock);
switch (nr) {
case TEMP_PWM_TTTI:
- val = SENSORS_LIMIT(val, 0, 0x7f);
+ val = clamp_val(val, 0, 0x7f);
w83795_write(client, W83795_REG_TTTI(index), val);
break;
case TEMP_PWM_CTFS:
- val = SENSORS_LIMIT(val, 0, 0x7f);
+ val = clamp_val(val, 0, 0x7f);
w83795_write(client, W83795_REG_CTFS(index), val);
break;
case TEMP_PWM_HCT:
- val = SENSORS_LIMIT(val, 0, 0x0f);
+ val = clamp_val(val, 0, 0x0f);
tmp = w83795_read(client, W83795_REG_HT(index));
tmp &= 0x0f;
tmp |= (val << 4) & 0xf0;
w83795_write(client, W83795_REG_HT(index), tmp);
break;
case TEMP_PWM_HOT:
- val = SENSORS_LIMIT(val, 0, 0x0f);
+ val = clamp_val(val, 0, 0x0f);
tmp = w83795_read(client, W83795_REG_HT(index));
tmp &= 0xf0;
tmp |= val & 0x0f;
@@ -1541,7 +1541,7 @@
if ((index >= 17) &&
!((data->has_gain >> (index - 17)) & 1))
val /= 8;
- val = SENSORS_LIMIT(val, 0, 0x3FF);
+ val = clamp_val(val, 0, 0x3FF);
mutex_lock(&data->update_lock);
lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
@@ -1596,7 +1596,7 @@
switch (nr) {
case SETUP_PWM_DEFAULT:
- val = SENSORS_LIMIT(val, 0, 0xff);
+ val = clamp_val(val, 0, 0xff);
break;
case SETUP_PWM_UPTIME:
case SETUP_PWM_DOWNTIME:
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 79710bc..edb06cd 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -86,8 +86,8 @@
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \
@@ -95,9 +95,8 @@
1350000 / ((val) * (div))))
/* for temp */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? \
- (val) + 0x100 * 1000 \
- : (val)) / 1000, 0, 0xff))
+#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 \
+ : (val)) / 1000, 0, 0xff))
#define TEMP_FROM_REG(val) (((val) & 0x80 ? \
(val) - 0x100 : (val)) * 1000)
@@ -106,7 +105,7 @@
* in mV as would be measured on the chip input pin, need to just
* multiply/divide by 8 to translate from/to register values.
*/
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 4) / 8), 0, 255))
+#define IN_TO_REG(val) (clamp_val((((val) + 4) / 8), 0, 255))
#define IN_FROM_REG(val) ((val) * 8)
#define DIV_FROM_REG(val) (1 << (val))
@@ -115,7 +114,7 @@
DIV_TO_REG(long val)
{
int i;
- val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ val = clamp_val(val, 1, 128) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -481,7 +480,7 @@
err = kstrtoul(buf, 10, &val);
if (err)
return err;
- val = SENSORS_LIMIT(val, 0, 255);
+ val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm[nr] = val;
@@ -564,7 +563,7 @@
mutex_lock(&data->update_lock);
tol_mask = w83l786ng_read_value(client,
W83L786NG_REG_TOLERANCE) & ((nr == 1) ? 0x0f : 0xf0);
- tol_tmp = SENSORS_LIMIT(val, 0, 15);
+ tol_tmp = clamp_val(val, 0, 15);
tol_tmp &= 0x0f;
data->tolerance[nr] = tol_tmp;
if (nr == 1)
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 6aafa3d..c447e8d 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -406,7 +406,7 @@
return -EIO;
}
-static int acpi_smbus_cmi_remove(struct acpi_device *device, int type)
+static int acpi_smbus_cmi_remove(struct acpi_device *device)
{
struct acpi_smbus_cmi *smbus_cmi = acpi_driver_data(device);
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 2df9414..5d66750 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -74,7 +74,7 @@
.en_core_tk_irqen = 1,
};
/* intel_idle.max_cstate=0 disables driver */
-static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
+static int max_cstate = CPUIDLE_STATE_MAX - 1;
static unsigned int mwait_substates;
@@ -90,6 +90,7 @@
* Indicate which enable bits to clear here.
*/
unsigned long auto_demotion_disable_flags;
+ bool disable_promotion_to_c1e;
};
static const struct idle_cpu *icpu;
@@ -109,162 +110,206 @@
#define CPUIDLE_FLAG_TLB_FLUSHED 0x10000
/*
+ * MWAIT takes an 8-bit "hint" in EAX "suggesting"
+ * the C-state (top nibble) and sub-state (bottom nibble)
+ * 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
+ *
+ * We store the hint at the top of our "flags" for each state.
+ */
+#define flg2MWAIT(flags) (((flags) >> 24) & 0xFF)
+#define MWAIT2flg(eax) ((eax & 0xFF) << 24)
+
+/*
* States are indexed by the cstate number,
* which is also the index into the MWAIT hint array.
* Thus C0 is a dummy.
*/
-static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
- { /* MWAIT C0 */ },
- { /* MWAIT C1 */
+static struct cpuidle_state nehalem_cstates[CPUIDLE_STATE_MAX] = {
+ {
.name = "C1-NHM",
.desc = "MWAIT 0x00",
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 3,
.target_residency = 6,
.enter = &intel_idle },
- { /* MWAIT C2 */
+ {
+ .name = "C1E-NHM",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
.name = "C3-NHM",
.desc = "MWAIT 0x10",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle },
- { /* MWAIT C3 */
+ {
.name = "C6-NHM",
.desc = "MWAIT 0x20",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 800,
.enter = &intel_idle },
+ {
+ .enter = NULL }
};
-static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = {
- { /* MWAIT C0 */ },
- { /* MWAIT C1 */
+static struct cpuidle_state snb_cstates[CPUIDLE_STATE_MAX] = {
+ {
.name = "C1-SNB",
.desc = "MWAIT 0x00",
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .exit_latency = 1,
- .target_residency = 1,
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 2,
+ .target_residency = 2,
.enter = &intel_idle },
- { /* MWAIT C2 */
+ {
+ .name = "C1E-SNB",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
.name = "C3-SNB",
.desc = "MWAIT 0x10",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 211,
.enter = &intel_idle },
- { /* MWAIT C3 */
+ {
.name = "C6-SNB",
.desc = "MWAIT 0x20",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 104,
.target_residency = 345,
.enter = &intel_idle },
- { /* MWAIT C4 */
+ {
.name = "C7-SNB",
.desc = "MWAIT 0x30",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 109,
.target_residency = 345,
.enter = &intel_idle },
+ {
+ .enter = NULL }
};
-static struct cpuidle_state ivb_cstates[MWAIT_MAX_NUM_CSTATES] = {
- { /* MWAIT C0 */ },
- { /* MWAIT C1 */
+static struct cpuidle_state ivb_cstates[CPUIDLE_STATE_MAX] = {
+ {
.name = "C1-IVB",
.desc = "MWAIT 0x00",
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
- { /* MWAIT C2 */
+ {
+ .name = "C1E-IVB",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
.name = "C3-IVB",
.desc = "MWAIT 0x10",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 156,
.enter = &intel_idle },
- { /* MWAIT C3 */
+ {
.name = "C6-IVB",
.desc = "MWAIT 0x20",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 300,
.enter = &intel_idle },
- { /* MWAIT C4 */
+ {
.name = "C7-IVB",
.desc = "MWAIT 0x30",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 87,
.target_residency = 300,
.enter = &intel_idle },
+ {
+ .enter = NULL }
};
-static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
- { /* MWAIT C0 */ },
- { /* MWAIT C1 */
- .name = "C1-ATM",
+static struct cpuidle_state hsw_cstates[CPUIDLE_STATE_MAX] = {
+ {
+ .name = "C1-HSW",
.desc = "MWAIT 0x00",
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .exit_latency = 1,
- .target_residency = 4,
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 2,
+ .target_residency = 2,
.enter = &intel_idle },
- { /* MWAIT C2 */
+ {
+ .name = "C1E-HSW",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
+ .name = "C3-HSW",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 33,
+ .target_residency = 100,
+ .enter = &intel_idle },
+ {
+ .name = "C6-HSW",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 133,
+ .target_residency = 400,
+ .enter = &intel_idle },
+ {
+ .name = "C7s-HSW",
+ .desc = "MWAIT 0x32",
+ .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 166,
+ .target_residency = 500,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
+static struct cpuidle_state atom_cstates[CPUIDLE_STATE_MAX] = {
+ {
+ .name = "C1E-ATM",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
.name = "C2-ATM",
.desc = "MWAIT 0x10",
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle },
- { /* MWAIT C3 */ },
- { /* MWAIT C4 */
+ {
.name = "C4-ATM",
.desc = "MWAIT 0x30",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.target_residency = 400,
.enter = &intel_idle },
- { /* MWAIT C5 */ },
- { /* MWAIT C6 */
+ {
.name = "C6-ATM",
.desc = "MWAIT 0x52",
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle },
+ {
+ .enter = NULL }
};
-static long get_driver_data(int cstate)
-{
- int driver_data;
- switch (cstate) {
-
- case 1: /* MWAIT C1 */
- driver_data = 0x00;
- break;
- case 2: /* MWAIT C2 */
- driver_data = 0x10;
- break;
- case 3: /* MWAIT C3 */
- driver_data = 0x20;
- break;
- case 4: /* MWAIT C4 */
- driver_data = 0x30;
- break;
- case 5: /* MWAIT C5 */
- driver_data = 0x40;
- break;
- case 6: /* MWAIT C6 */
- driver_data = 0x52;
- break;
- default:
- driver_data = 0x00;
- }
- return driver_data;
-}
-
/**
* intel_idle
* @dev: cpuidle_device
@@ -278,8 +323,7 @@
{
unsigned long ecx = 1; /* break on interrupt flag */
struct cpuidle_state *state = &drv->states[index];
- struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
- unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
+ unsigned long eax = flg2MWAIT(state->flags);
unsigned int cstate;
int cpu = smp_processor_id();
@@ -362,10 +406,19 @@
msr_bits &= ~(icpu->auto_demotion_disable_flags);
wrmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
}
+static void c1e_promotion_disable(void *dummy)
+{
+ unsigned long long msr_bits;
+
+ rdmsrl(MSR_IA32_POWER_CTL, msr_bits);
+ msr_bits &= ~0x2;
+ wrmsrl(MSR_IA32_POWER_CTL, msr_bits);
+}
static const struct idle_cpu idle_cpu_nehalem = {
.state_table = nehalem_cstates,
.auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
+ .disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_atom = {
@@ -379,10 +432,17 @@
static const struct idle_cpu idle_cpu_snb = {
.state_table = snb_cstates,
+ .disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_ivb = {
.state_table = ivb_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
+static const struct idle_cpu idle_cpu_hsw = {
+ .state_table = hsw_cstates,
+ .disable_promotion_to_c1e = true,
};
#define ICPU(model, cpu) \
@@ -402,6 +462,9 @@
ICPU(0x2d, idle_cpu_snb),
ICPU(0x3a, idle_cpu_ivb),
ICPU(0x3e, idle_cpu_ivb),
+ ICPU(0x3c, idle_cpu_hsw),
+ ICPU(0x3f, idle_cpu_hsw),
+ ICPU(0x45, idle_cpu_hsw),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
@@ -484,32 +547,31 @@
drv->state_count = 1;
- for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) {
- int num_substates;
+ for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
+ int num_substates, mwait_hint, mwait_cstate, mwait_substate;
- if (cstate > max_cstate) {
+ if (cpuidle_state_table[cstate].enter == NULL)
+ break;
+
+ if (cstate + 1 > max_cstate) {
printk(PREFIX "max_cstate %d reached\n",
max_cstate);
break;
}
- /* does the state exist in CPUID.MWAIT? */
- num_substates = (mwait_substates >> ((cstate) * 4))
- & MWAIT_SUBSTATE_MASK;
- if (num_substates == 0)
- continue;
- /* is the state not enabled? */
- if (cpuidle_state_table[cstate].enter == NULL) {
- /* does the driver not know about the state? */
- if (*cpuidle_state_table[cstate].name == '\0')
- pr_debug(PREFIX "unaware of model 0x%x"
- " MWAIT %d please"
- " contact lenb@kernel.org\n",
- boot_cpu_data.x86_model, cstate);
- continue;
- }
+ mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
+ mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint);
+ mwait_substate = MWAIT_HINT2SUBSTATE(mwait_hint);
- if ((cstate > 2) &&
+ /* does the state exist in CPUID.MWAIT? */
+ num_substates = (mwait_substates >> ((mwait_cstate + 1) * 4))
+ & MWAIT_SUBSTATE_MASK;
+
+ /* if sub-state in table is not enumerated by CPUID */
+ if ((mwait_substate + 1) > num_substates)
+ continue;
+
+ if (((mwait_cstate + 1) > 2) &&
!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halts in idle"
" states deeper than C2");
@@ -523,6 +585,9 @@
if (icpu->auto_demotion_disable_flags)
on_each_cpu(auto_demotion_disable, NULL, 1);
+ if (icpu->disable_promotion_to_c1e) /* each-cpu is redundant */
+ on_each_cpu(c1e_promotion_disable, NULL, 1);
+
return 0;
}
@@ -541,25 +606,28 @@
dev->state_count = 1;
- for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) {
- int num_substates;
+ for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
+ int num_substates, mwait_hint, mwait_cstate, mwait_substate;
- if (cstate > max_cstate) {
+ if (cpuidle_state_table[cstate].enter == NULL)
+ continue;
+
+ if (cstate + 1 > max_cstate) {
printk(PREFIX "max_cstate %d reached\n", max_cstate);
break;
}
- /* does the state exist in CPUID.MWAIT? */
- num_substates = (mwait_substates >> ((cstate) * 4))
- & MWAIT_SUBSTATE_MASK;
- if (num_substates == 0)
- continue;
- /* is the state not enabled? */
- if (cpuidle_state_table[cstate].enter == NULL)
- continue;
+ mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
+ mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint);
+ mwait_substate = MWAIT_HINT2SUBSTATE(mwait_hint);
- dev->states_usage[dev->state_count].driver_data =
- (void *)get_driver_data(cstate);
+ /* does the state exist in CPUID.MWAIT? */
+ num_substates = (mwait_substates >> ((mwait_cstate + 1) * 4))
+ & MWAIT_SUBSTATE_MASK;
+
+ /* if sub-state in table is not enumerated by CPUID */
+ if ((mwait_substate + 1) > num_substates)
+ continue;
dev->state_count += 1;
}
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 55f7e57..38b523a 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -3,7 +3,7 @@
#
menu "Input device support"
- depends on !S390 && !UML
+ depends on !UML
config INPUT
tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index 47a6009..71db193 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -18,6 +18,7 @@
{
if (dev->absinfo && test_bit(src, dev->absbit)) {
dev->absinfo[dst] = dev->absinfo[src];
+ dev->absinfo[dst].fuzz = 0;
dev->absbit[BIT_WORD(dst)] |= BIT_MASK(dst);
}
}
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ce01332f..c044699 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1785,12 +1785,13 @@
* its driver (or binding fails). Once managed input device is allocated,
* it is ready to be set up and registered in the same fashion as regular
* input device. There are no special devm_input_device_[un]register()
- * variants, regular ones work with both managed and unmanaged devices.
+ * variants, regular ones work with both managed and unmanaged devices,
+ * should you need them. In most cases however, managed input device need
+ * not be explicitly unregistered or freed.
*
* NOTE: the owner device is set up as parent of input device and users
* should not override it.
*/
-
struct input_dev *devm_input_allocate_device(struct device *dev)
{
struct input_dev *input;
@@ -2004,6 +2005,17 @@
* Once device has been successfully registered it can be unregistered
* with input_unregister_device(); input_free_device() should not be
* called in this case.
+ *
+ * Note that this function is also used to register managed input devices
+ * (ones allocated with devm_input_allocate_device()). Such managed input
+ * devices need not be explicitly unregistered or freed, their tear down
+ * is controlled by the devres infrastructure. It is also worth noting
+ * that tear down of managed input devices is internally a 2-step process:
+ * registered managed input device is first unregistered, but stays in
+ * memory and can still handle input_event() calls (although events will
+ * not be delivered anywhere). The freeing of managed input device will
+ * happen later, when devres stack is unwound to the point where device
+ * allocation was made.
*/
int input_register_device(struct input_dev *dev)
{
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
index f8f892b..b76ac58 100644
--- a/drivers/input/joystick/walkera0701.c
+++ b/drivers/input/joystick/walkera0701.c
@@ -12,7 +12,7 @@
* the Free Software Foundation.
*/
-/* #define WK0701_DEBUG */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define RESERVE 20000
#define SYNC_PULSE 1306000
@@ -67,6 +67,7 @@
{
int i;
int val1, val2, val3, val4, val5, val6, val7, val8;
+ int magic, magic_bit;
int crc1, crc2;
for (crc1 = crc2 = i = 0; i < 10; i++) {
@@ -102,17 +103,12 @@
val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20];
val8 *= (w->buf[18] & 2) - 1; /*sign */
-#ifdef WK0701_DEBUG
- {
- int magic, magic_bit;
- magic = (w->buf[21] << 4) | w->buf[22];
- magic_bit = (w->buf[24] & 8) >> 3;
- printk(KERN_DEBUG
- "walkera0701: %4d %4d %4d %4d %4d %4d %4d %4d (magic %2x %d)\n",
- val1, val2, val3, val4, val5, val6, val7, val8, magic,
- magic_bit);
- }
-#endif
+ magic = (w->buf[21] << 4) | w->buf[22];
+ magic_bit = (w->buf[24] & 8) >> 3;
+ pr_debug("%4d %4d %4d %4d %4d %4d %4d %4d (magic %2x %d)\n",
+ val1, val2, val3, val4, val5, val6, val7, val8,
+ magic, magic_bit);
+
input_report_abs(w->input_dev, ABS_X, val2);
input_report_abs(w->input_dev, ABS_Y, val1);
input_report_abs(w->input_dev, ABS_Z, val6);
@@ -187,6 +183,9 @@
{
struct walkera_dev *w = input_get_drvdata(dev);
+ if (parport_claim(w->pardevice))
+ return -EBUSY;
+
parport_enable_irq(w->parport);
return 0;
}
@@ -197,40 +196,51 @@
parport_disable_irq(w->parport);
hrtimer_cancel(&w->timer);
+
+ parport_release(w->pardevice);
}
static int walkera0701_connect(struct walkera_dev *w, int parport)
{
- int err = -ENODEV;
+ int error;
w->parport = parport_find_number(parport);
- if (w->parport == NULL)
+ if (!w->parport) {
+ pr_err("parport %d does not exist\n", parport);
return -ENODEV;
-
- if (w->parport->irq == -1) {
- printk(KERN_ERR "walkera0701: parport without interrupt\n");
- goto init_err;
}
- err = -EBUSY;
+ if (w->parport->irq == -1) {
+ pr_err("parport %d does not have interrupt assigned\n",
+ parport);
+ error = -EINVAL;
+ goto err_put_parport;
+ }
+
w->pardevice = parport_register_device(w->parport, "walkera0701",
NULL, NULL, walkera0701_irq_handler,
PARPORT_DEV_EXCL, w);
- if (!w->pardevice)
- goto init_err;
+ if (!w->pardevice) {
+ pr_err("failed to register parport device\n");
+ error = -EIO;
+ goto err_put_parport;
+ }
- if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT))
- goto init_err1;
-
- if (parport_claim(w->pardevice))
- goto init_err1;
+ if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT)) {
+ pr_err("failed to negotiate parport mode\n");
+ error = -EIO;
+ goto err_unregister_device;
+ }
hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
w->timer.function = timer_handler;
w->input_dev = input_allocate_device();
- if (!w->input_dev)
- goto init_err2;
+ if (!w->input_dev) {
+ pr_err("failed to allocate input device\n");
+ error = -ENOMEM;
+ goto err_unregister_device;
+ }
input_set_drvdata(w->input_dev, w);
w->input_dev->name = "Walkera WK-0701 TX";
@@ -241,6 +251,7 @@
w->input_dev->id.vendor = 0x0001;
w->input_dev->id.product = 0x0001;
w->input_dev->id.version = 0x0100;
+ w->input_dev->dev.parent = w->parport->dev;
w->input_dev->open = walkera0701_open;
w->input_dev->close = walkera0701_close;
@@ -254,27 +265,26 @@
input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
- err = input_register_device(w->input_dev);
- if (err)
- goto init_err3;
+ error = input_register_device(w->input_dev);
+ if (error) {
+ pr_err("failed to register input device\n");
+ goto err_free_input_dev;
+ }
return 0;
- init_err3:
+err_free_input_dev:
input_free_device(w->input_dev);
- init_err2:
- parport_release(w->pardevice);
- init_err1:
+err_unregister_device:
parport_unregister_device(w->pardevice);
- init_err:
+err_put_parport:
parport_put_port(w->parport);
- return err;
+ return error;
}
static void walkera0701_disconnect(struct walkera_dev *w)
{
input_unregister_device(w->input_dev);
- parport_release(w->pardevice);
parport_unregister_device(w->pardevice);
parport_put_port(w->parport);
}
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 5a240c6..ac05006 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -224,7 +224,7 @@
config KEYBOARD_TCA8418
tristate "TCA8418 Keypad Support"
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
select INPUT_MATRIXKMAP
help
This driver implements basic keypad functionality
@@ -303,7 +303,7 @@
config KEYBOARD_LM8323
tristate "LM8323 keypad chip"
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
depends on LEDS_CLASS
help
If you say yes here you get support for the National Semiconductor
@@ -420,7 +420,7 @@
config KEYBOARD_TEGRA
tristate "NVIDIA Tegra internal matrix keyboard controller support"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA && OF
select INPUT_MATRIXKMAP
help
Say Y here if you want to use a matrix keyboard connected directly
@@ -479,6 +479,16 @@
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
+config KEYBOARD_GOLDFISH_EVENTS
+ depends on GOLDFISH
+ tristate "Generic Input Event device for Goldfish"
+ help
+ Say Y here to get an input event device for the Goldfish virtual
+ device emulator.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goldfish-events.
+
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 44e7600..49b1645 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index add5ffd..2626773 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -676,6 +676,39 @@
serio_continue_rx(atkbd->ps2dev.serio);
}
+static int atkbd_activate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+ dev_err(&ps2dev->serio->dev,
+ "Failed to enable keyboard on %s\n",
+ ps2dev->serio->phys);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * atkbd_deactivate() resets and disables the keyboard from sending
+ * keystrokes.
+ */
+
+static void atkbd_deactivate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
+ dev_err(&ps2dev->serio->dev,
+ "Failed to deactivate keyboard on %s\n",
+ ps2dev->serio->phys);
+}
+
/*
* atkbd_probe() probes for an AT keyboard on a serio port.
*/
@@ -726,11 +759,17 @@
if (atkbd->id == 0xaca1 && atkbd->translated) {
dev_err(&ps2dev->serio->dev,
- "NCD terminal keyboards are only supported on non-translating controlelrs. "
+ "NCD terminal keyboards are only supported on non-translating controllers. "
"Use i8042.direct=1 to disable translation.\n");
return -1;
}
+/*
+ * Make sure nothing is coming from the keyboard and disturbs our
+ * internal state.
+ */
+ atkbd_deactivate(atkbd);
+
return 0;
}
@@ -825,24 +864,6 @@
return 0;
}
-static int atkbd_activate(struct atkbd *atkbd)
-{
- struct ps2dev *ps2dev = &atkbd->ps2dev;
-
-/*
- * Enable the keyboard to receive keystrokes.
- */
-
- if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
- dev_err(&ps2dev->serio->dev,
- "Failed to enable keyboard on %s\n",
- ps2dev->serio->phys);
- return -1;
- }
-
- return 0;
-}
-
/*
* atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
* reboot.
@@ -1150,7 +1171,6 @@
atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
atkbd_reset_state(atkbd);
- atkbd_activate(atkbd);
} else {
atkbd->set = 2;
@@ -1165,6 +1185,8 @@
goto fail3;
atkbd_enable(atkbd);
+ if (serio->write)
+ atkbd_activate(atkbd);
err = input_register_device(atkbd->dev);
if (err)
@@ -1208,8 +1230,6 @@
if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
goto out;
- atkbd_activate(atkbd);
-
/*
* Restore LED state and repeat rate. While input core
* will do this for us at resume time reconnect may happen
@@ -1223,7 +1243,17 @@
}
+ /*
+ * Reset our state machine in case reconnect happened in the middle
+ * of multi-byte scancode.
+ */
+ atkbd->xl_bit = 0;
+ atkbd->emul = 0;
+
atkbd_enable(atkbd);
+ if (atkbd->write)
+ atkbd_activate(atkbd);
+
retval = 0;
out:
diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c
new file mode 100644
index 0000000..9f60a2e
--- /dev/null
+++ b/drivers/input/keyboard/goldfish_events.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+enum {
+ REG_READ = 0x00,
+ REG_SET_PAGE = 0x00,
+ REG_LEN = 0x04,
+ REG_DATA = 0x08,
+
+ PAGE_NAME = 0x00000,
+ PAGE_EVBITS = 0x10000,
+ PAGE_ABSDATA = 0x20000 | EV_ABS,
+};
+
+struct event_dev {
+ struct input_dev *input;
+ int irq;
+ void __iomem *addr;
+ char name[0];
+};
+
+static irqreturn_t events_interrupt(int irq, void *dev_id)
+{
+ struct event_dev *edev = dev_id;
+ unsigned type, code, value;
+
+ type = __raw_readl(edev->addr + REG_READ);
+ code = __raw_readl(edev->addr + REG_READ);
+ value = __raw_readl(edev->addr + REG_READ);
+
+ input_event(edev->input, type, code, value);
+ input_sync(edev->input);
+ return IRQ_HANDLED;
+}
+
+static void events_import_bits(struct event_dev *edev,
+ unsigned long bits[], unsigned type, size_t count)
+{
+ void __iomem *addr = edev->addr;
+ int i, j;
+ size_t size;
+ uint8_t val;
+
+ __raw_writel(PAGE_EVBITS | type, addr + REG_SET_PAGE);
+
+ size = __raw_readl(addr + REG_LEN) * 8;
+ if (size < count)
+ count = size;
+
+ addr += REG_DATA;
+ for (i = 0; i < count; i += 8) {
+ val = __raw_readb(addr++);
+ for (j = 0; j < 8; j++)
+ if (val & 1 << j)
+ set_bit(i + j, bits);
+ }
+}
+
+static void events_import_abs_params(struct event_dev *edev)
+{
+ struct input_dev *input_dev = edev->input;
+ void __iomem *addr = edev->addr;
+ u32 val[4];
+ int count;
+ int i, j;
+
+ __raw_writel(PAGE_ABSDATA, addr + REG_SET_PAGE);
+
+ count = __raw_readl(addr + REG_LEN) / sizeof(val);
+ if (count > ABS_MAX)
+ count = ABS_MAX;
+
+ for (i = 0; i < count; i++) {
+ if (!test_bit(i, input_dev->absbit))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(val); j++) {
+ int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32);
+ val[j] = __raw_readl(edev->addr + REG_DATA + offset);
+ }
+
+ input_set_abs_params(input_dev, i,
+ val[0], val[1], val[2], val[3]);
+ }
+}
+
+static int events_probe(struct platform_device *pdev)
+{
+ struct input_dev *input_dev;
+ struct event_dev *edev;
+ struct resource *res;
+ unsigned keymapnamelen;
+ void __iomem *addr;
+ int irq;
+ int i;
+ int error;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ addr = devm_ioremap(&pdev->dev, res->start, 4096);
+ if (!addr)
+ return -ENOMEM;
+
+ __raw_writel(PAGE_NAME, addr + REG_SET_PAGE);
+ keymapnamelen = __raw_readl(addr + REG_LEN);
+
+ edev = devm_kzalloc(&pdev->dev,
+ sizeof(struct event_dev) + keymapnamelen + 1,
+ GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ edev->input = input_dev;
+ edev->addr = addr;
+ edev->irq = irq;
+
+ for (i = 0; i < keymapnamelen; i++)
+ edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
+
+ pr_debug("events_probe() keymap=%s\n", edev->name);
+
+ input_dev->name = edev->name;
+ input_dev->id.bustype = BUS_HOST;
+
+ events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX);
+ events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX);
+ events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX);
+ events_import_bits(edev, input_dev->absbit, EV_ABS, ABS_MAX);
+ events_import_bits(edev, input_dev->mscbit, EV_MSC, MSC_MAX);
+ events_import_bits(edev, input_dev->ledbit, EV_LED, LED_MAX);
+ events_import_bits(edev, input_dev->sndbit, EV_SND, SND_MAX);
+ events_import_bits(edev, input_dev->ffbit, EV_FF, FF_MAX);
+ events_import_bits(edev, input_dev->swbit, EV_SW, SW_MAX);
+
+ events_import_abs_params(edev);
+
+ error = devm_request_irq(&pdev->dev, edev->irq, events_interrupt, 0,
+ "goldfish-events-keypad", edev);
+ if (error)
+ return error;
+
+ error = input_register_device(input_dev);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static struct platform_driver events_driver = {
+ .probe = events_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "goldfish_events",
+ },
+};
+
+module_platform_driver(events_driver);
+
+MODULE_AUTHOR("Brian Swetland");
+MODULE_DESCRIPTION("Goldfish Event Device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 6d150e3..98f9113 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -20,6 +20,7 @@
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/timer.h>
@@ -414,15 +415,23 @@
return -EIO;
}
+#ifdef CONFIG_OF
+static struct of_device_id imx_keypad_of_match[] = {
+ { .compatible = "fsl,imx21-kpp", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
+#endif
+
static int imx_keypad_probe(struct platform_device *pdev)
{
const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
struct imx_keypad *keypad;
struct input_dev *input_dev;
struct resource *res;
- int irq, error, i;
+ int irq, error, i, row, col;
- if (keymap_data == NULL) {
+ if (!keymap_data && !pdev->dev.of_node) {
dev_err(&pdev->dev, "no keymap defined\n");
return -EINVAL;
}
@@ -480,22 +489,6 @@
goto failed_unmap;
}
- /* Search for rows and cols enabled */
- for (i = 0; i < keymap_data->keymap_size; i++) {
- keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
- keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
- }
-
- if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
- keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
- dev_err(&pdev->dev,
- "invalid key data (too many rows or colums)\n");
- error = -EINVAL;
- goto failed_clock_put;
- }
- dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
- dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
-
/* Init the Input device */
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
@@ -512,6 +505,19 @@
goto failed_clock_put;
}
+ /* Search for rows and cols enabled */
+ for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+ for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+ i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+ if (keypad->keycodes[i] != KEY_RESERVED) {
+ keypad->rows_en_mask |= 1 << row;
+ keypad->cols_en_mask |= 1 << col;
+ }
+ }
+ }
+ dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
+ dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
+
__set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_set_drvdata(input_dev, keypad);
@@ -631,6 +637,7 @@
.name = "imx-keypad",
.owner = THIS_MODULE,
.pm = &imx_kbd_pm_ops,
+ .of_match_table = of_match_ptr(imx_keypad_of_match),
},
.probe = imx_keypad_probe,
.remove = imx_keypad_remove,
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 93c8126..0de23f4 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -398,7 +398,7 @@
lm8323_configure(lm);
}
for (i = 0; i < LM8323_NUM_PWMS; i++) {
- if (ints & (1 << (INT_PWM1 + i))) {
+ if (ints & (INT_PWM1 << i)) {
dev_vdbg(&lm->client->dev,
"pwm%d engine completed\n", i);
pwm_done(&lm->pwm[i]);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index f4ff0dd..71d7719 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -403,7 +403,7 @@
struct matrix_keypad_platform_data *pdata;
struct device_node *np = dev->of_node;
unsigned int *gpios;
- int i;
+ int i, nrow, ncol;
if (!np) {
dev_err(dev, "device lacks DT data\n");
@@ -416,9 +416,9 @@
return ERR_PTR(-ENOMEM);
}
- pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
- pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
- if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
+ pdata->num_row_gpios = nrow = of_gpio_named_count(np, "row-gpios");
+ pdata->num_col_gpios = ncol = of_gpio_named_count(np, "col-gpios");
+ if (nrow <= 0 || ncol <= 0) {
dev_err(dev, "number of keypad rows/columns not specified\n");
return ERR_PTR(-EINVAL);
}
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 3dc2b0f..1c0ddad 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/leds.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
@@ -39,6 +40,11 @@
#define QT2160_CMD_GPIOS 6
#define QT2160_CMD_SUBVER 7
#define QT2160_CMD_CALIBRATE 10
+#define QT2160_CMD_DRIVE_X 70
+#define QT2160_CMD_PWMEN_X 74
+#define QT2160_CMD_PWM_DUTY 76
+
+#define QT2160_NUM_LEDS_X 8
#define QT2160_CYCLE_INTERVAL (2*HZ)
@@ -49,6 +55,17 @@
KEY_C, KEY_D, KEY_E, KEY_F,
};
+#ifdef CONFIG_LEDS_CLASS
+struct qt2160_led {
+ struct qt2160_data *qt2160;
+ struct led_classdev cdev;
+ struct work_struct work;
+ char name[32];
+ int id;
+ enum led_brightness new_brightness;
+};
+#endif
+
struct qt2160_data {
struct i2c_client *client;
struct input_dev *input;
@@ -56,8 +73,61 @@
spinlock_t lock; /* Protects canceling/rescheduling of dwork */
unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
u16 key_matrix;
+#ifdef CONFIG_LEDS_CLASS
+ struct qt2160_led leds[QT2160_NUM_LEDS_X];
+ struct mutex led_lock;
+#endif
};
+static int qt2160_read(struct i2c_client *client, u8 reg);
+static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);
+
+#ifdef CONFIG_LEDS_CLASS
+
+static void qt2160_led_work(struct work_struct *work)
+{
+ struct qt2160_led *led = container_of(work, struct qt2160_led, work);
+ struct qt2160_data *qt2160 = led->qt2160;
+ struct i2c_client *client = qt2160->client;
+ int value = led->new_brightness;
+ u32 drive, pwmen;
+
+ mutex_lock(&qt2160->led_lock);
+
+ drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
+ pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
+ if (value != LED_OFF) {
+ drive |= (1 << led->id);
+ pwmen |= (1 << led->id);
+
+ } else {
+ drive &= ~(1 << led->id);
+ pwmen &= ~(1 << led->id);
+ }
+ qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
+ qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);
+
+ /*
+ * Changing this register will change the brightness
+ * of every LED in the qt2160. It's a HW limitation.
+ */
+ if (value != LED_OFF)
+ qt2160_write(client, QT2160_CMD_PWM_DUTY, value);
+
+ mutex_unlock(&qt2160->led_lock);
+}
+
+static void qt2160_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
+
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+#endif /* CONFIG_LEDS_CLASS */
+
static int qt2160_read_block(struct i2c_client *client,
u8 inireg, u8 *buffer, unsigned int count)
{
@@ -216,6 +286,63 @@
return ret;
}
+#ifdef CONFIG_LEDS_CLASS
+
+static int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+ struct i2c_client *client = qt2160->client;
+ int ret;
+ int i;
+
+ mutex_init(&qt2160->led_lock);
+
+ for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
+ struct qt2160_led *led = &qt2160->leds[i];
+
+ snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
+ led->cdev.name = led->name;
+ led->cdev.brightness_set = qt2160_led_set;
+ led->cdev.brightness = LED_OFF;
+ led->id = i;
+ led->qt2160 = qt2160;
+
+ INIT_WORK(&led->work, qt2160_led_work);
+
+ ret = led_classdev_register(&client->dev, &led->cdev);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Tur off LEDs */
+ qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
+ qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
+ qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);
+
+ return 0;
+}
+
+static void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+ int i;
+
+ for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
+ led_classdev_unregister(&qt2160->leds[i].cdev);
+ cancel_work_sync(&qt2160->leds[i].work);
+ }
+}
+
+#else
+
+static inline int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+ return 0;
+}
+
+static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+}
+
+#endif
static bool qt2160_identify(struct i2c_client *client)
{
@@ -249,7 +376,7 @@
}
static int qt2160_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct qt2160_data *qt2160;
struct input_dev *input;
@@ -314,11 +441,17 @@
}
}
+ error = qt2160_register_leds(qt2160);
+ if (error) {
+ dev_err(&client->dev, "Failed to register leds\n");
+ goto err_free_irq;
+ }
+
error = input_register_device(qt2160->input);
if (error) {
dev_err(&client->dev,
"Failed to register input device\n");
- goto err_free_irq;
+ goto err_unregister_leds;
}
i2c_set_clientdata(client, qt2160);
@@ -326,6 +459,8 @@
return 0;
+err_unregister_leds:
+ qt2160_unregister_leds(qt2160);
err_free_irq:
if (client->irq)
free_irq(client->irq, qt2160);
@@ -339,6 +474,8 @@
{
struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+ qt2160_unregister_leds(qt2160);
+
/* Release IRQ so no queue will be scheduled */
if (client->irq)
free_irq(client->irq, qt2160);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index c76f968..d89e7d39 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -29,9 +29,16 @@
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#include <linux/input/tegra_kbc.h>
+#include <linux/input/matrix_keypad.h>
#include <mach/clk.h>
+#define KBC_MAX_GPIO 24
+#define KBC_MAX_KPENT 8
+
+#define KBC_MAX_ROW 16
+#define KBC_MAX_COL 8
+#define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL)
+
#define KBC_MAX_DEBOUNCE_CNT 0x3ffu
/* KBC row scan time and delay for beginning the row scan. */
@@ -67,10 +74,27 @@
#define KBC_ROW_SHIFT 3
+enum tegra_pin_type {
+ PIN_CFG_IGNORE,
+ PIN_CFG_COL,
+ PIN_CFG_ROW,
+};
+
+struct tegra_kbc_pin_cfg {
+ enum tegra_pin_type type;
+ unsigned char num;
+};
+
struct tegra_kbc {
+ struct device *dev;
+ unsigned int debounce_cnt;
+ unsigned int repeat_cnt;
+ struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
+ const struct matrix_keymap_data *keymap_data;
+ bool wakeup;
void __iomem *mmio;
struct input_dev *idev;
- unsigned int irq;
+ int irq;
spinlock_t lock;
unsigned int repoll_dly;
unsigned long cp_dly_jiffies;
@@ -78,7 +102,6 @@
bool use_fn_map;
bool use_ghost_filter;
bool keypress_caused_wake;
- const struct tegra_kbc_platform_data *pdata;
unsigned short keycode[KBC_MAX_KEY * 2];
unsigned short current_keys[KBC_MAX_KPENT];
unsigned int num_pressed_keys;
@@ -87,147 +110,6 @@
struct clk *clk;
};
-static const u32 tegra_kbc_default_keymap[] = {
- KEY(0, 2, KEY_W),
- KEY(0, 3, KEY_S),
- KEY(0, 4, KEY_A),
- KEY(0, 5, KEY_Z),
- KEY(0, 7, KEY_FN),
-
- KEY(1, 7, KEY_LEFTMETA),
-
- KEY(2, 6, KEY_RIGHTALT),
- KEY(2, 7, KEY_LEFTALT),
-
- KEY(3, 0, KEY_5),
- KEY(3, 1, KEY_4),
- KEY(3, 2, KEY_R),
- KEY(3, 3, KEY_E),
- KEY(3, 4, KEY_F),
- KEY(3, 5, KEY_D),
- KEY(3, 6, KEY_X),
-
- KEY(4, 0, KEY_7),
- KEY(4, 1, KEY_6),
- KEY(4, 2, KEY_T),
- KEY(4, 3, KEY_H),
- KEY(4, 4, KEY_G),
- KEY(4, 5, KEY_V),
- KEY(4, 6, KEY_C),
- KEY(4, 7, KEY_SPACE),
-
- KEY(5, 0, KEY_9),
- KEY(5, 1, KEY_8),
- KEY(5, 2, KEY_U),
- KEY(5, 3, KEY_Y),
- KEY(5, 4, KEY_J),
- KEY(5, 5, KEY_N),
- KEY(5, 6, KEY_B),
- KEY(5, 7, KEY_BACKSLASH),
-
- KEY(6, 0, KEY_MINUS),
- KEY(6, 1, KEY_0),
- KEY(6, 2, KEY_O),
- KEY(6, 3, KEY_I),
- KEY(6, 4, KEY_L),
- KEY(6, 5, KEY_K),
- KEY(6, 6, KEY_COMMA),
- KEY(6, 7, KEY_M),
-
- KEY(7, 1, KEY_EQUAL),
- KEY(7, 2, KEY_RIGHTBRACE),
- KEY(7, 3, KEY_ENTER),
- KEY(7, 7, KEY_MENU),
-
- KEY(8, 4, KEY_RIGHTSHIFT),
- KEY(8, 5, KEY_LEFTSHIFT),
-
- KEY(9, 5, KEY_RIGHTCTRL),
- KEY(9, 7, KEY_LEFTCTRL),
-
- KEY(11, 0, KEY_LEFTBRACE),
- KEY(11, 1, KEY_P),
- KEY(11, 2, KEY_APOSTROPHE),
- KEY(11, 3, KEY_SEMICOLON),
- KEY(11, 4, KEY_SLASH),
- KEY(11, 5, KEY_DOT),
-
- KEY(12, 0, KEY_F10),
- KEY(12, 1, KEY_F9),
- KEY(12, 2, KEY_BACKSPACE),
- KEY(12, 3, KEY_3),
- KEY(12, 4, KEY_2),
- KEY(12, 5, KEY_UP),
- KEY(12, 6, KEY_PRINT),
- KEY(12, 7, KEY_PAUSE),
-
- KEY(13, 0, KEY_INSERT),
- KEY(13, 1, KEY_DELETE),
- KEY(13, 3, KEY_PAGEUP),
- KEY(13, 4, KEY_PAGEDOWN),
- KEY(13, 5, KEY_RIGHT),
- KEY(13, 6, KEY_DOWN),
- KEY(13, 7, KEY_LEFT),
-
- KEY(14, 0, KEY_F11),
- KEY(14, 1, KEY_F12),
- KEY(14, 2, KEY_F8),
- KEY(14, 3, KEY_Q),
- KEY(14, 4, KEY_F4),
- KEY(14, 5, KEY_F3),
- KEY(14, 6, KEY_1),
- KEY(14, 7, KEY_F7),
-
- KEY(15, 0, KEY_ESC),
- KEY(15, 1, KEY_GRAVE),
- KEY(15, 2, KEY_F5),
- KEY(15, 3, KEY_TAB),
- KEY(15, 4, KEY_F1),
- KEY(15, 5, KEY_F2),
- KEY(15, 6, KEY_CAPSLOCK),
- KEY(15, 7, KEY_F6),
-
- /* Software Handled Function Keys */
- KEY(20, 0, KEY_KP7),
-
- KEY(21, 0, KEY_KP9),
- KEY(21, 1, KEY_KP8),
- KEY(21, 2, KEY_KP4),
- KEY(21, 4, KEY_KP1),
-
- KEY(22, 1, KEY_KPSLASH),
- KEY(22, 2, KEY_KP6),
- KEY(22, 3, KEY_KP5),
- KEY(22, 4, KEY_KP3),
- KEY(22, 5, KEY_KP2),
- KEY(22, 7, KEY_KP0),
-
- KEY(27, 1, KEY_KPASTERISK),
- KEY(27, 3, KEY_KPMINUS),
- KEY(27, 4, KEY_KPPLUS),
- KEY(27, 5, KEY_KPDOT),
-
- KEY(28, 5, KEY_VOLUMEUP),
-
- KEY(29, 3, KEY_HOME),
- KEY(29, 4, KEY_END),
- KEY(29, 5, KEY_BRIGHTNESSDOWN),
- KEY(29, 6, KEY_VOLUMEDOWN),
- KEY(29, 7, KEY_BRIGHTNESSUP),
-
- KEY(30, 0, KEY_NUMLOCK),
- KEY(30, 1, KEY_SCROLLLOCK),
- KEY(30, 2, KEY_MUTE),
-
- KEY(31, 4, KEY_HELP),
-};
-
-static const
-struct matrix_keymap_data tegra_kbc_default_keymap_data = {
- .keymap = tegra_kbc_default_keymap,
- .keymap_size = ARRAY_SIZE(tegra_kbc_default_keymap),
-};
-
static void tegra_kbc_report_released_keys(struct input_dev *input,
unsigned short old_keycodes[],
unsigned int old_num_keys,
@@ -357,18 +239,6 @@
writel(val, kbc->mmio + KBC_CONTROL_0);
}
-static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable)
-{
- u32 val;
-
- val = readl(kbc->mmio + KBC_CONTROL_0);
- if (enable)
- val |= KBC_CONTROL_KEYPRESS_INT_EN;
- else
- val &= ~KBC_CONTROL_KEYPRESS_INT_EN;
- writel(val, kbc->mmio + KBC_CONTROL_0);
-}
-
static void tegra_kbc_keypress_timer(unsigned long data)
{
struct tegra_kbc *kbc = (struct tegra_kbc *)data;
@@ -439,12 +309,11 @@
static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter)
{
- const struct tegra_kbc_platform_data *pdata = kbc->pdata;
int i;
unsigned int rst_val;
/* Either mask all keys or none. */
- rst_val = (filter && !pdata->wakeup) ? ~0 : 0;
+ rst_val = (filter && !kbc->wakeup) ? ~0 : 0;
for (i = 0; i < KBC_MAX_ROW; i++)
writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4);
@@ -452,7 +321,6 @@
static void tegra_kbc_config_pins(struct tegra_kbc *kbc)
{
- const struct tegra_kbc_platform_data *pdata = kbc->pdata;
int i;
for (i = 0; i < KBC_MAX_GPIO; i++) {
@@ -468,13 +336,13 @@
row_cfg &= ~r_mask;
col_cfg &= ~c_mask;
- switch (pdata->pin_cfg[i].type) {
+ switch (kbc->pin_cfg[i].type) {
case PIN_CFG_ROW:
- row_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << r_shft;
+ row_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << r_shft;
break;
case PIN_CFG_COL:
- col_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << c_shft;
+ col_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << c_shft;
break;
case PIN_CFG_IGNORE:
@@ -488,7 +356,6 @@
static int tegra_kbc_start(struct tegra_kbc *kbc)
{
- const struct tegra_kbc_platform_data *pdata = kbc->pdata;
unsigned int debounce_cnt;
u32 val = 0;
@@ -503,10 +370,10 @@
tegra_kbc_config_pins(kbc);
tegra_kbc_setup_wakekeys(kbc, false);
- writel(pdata->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0);
+ writel(kbc->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0);
/* Keyboard debounce count is maximum of 12 bits. */
- debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+ debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt);
val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */
val |= KBC_CONTROL_FIFO_CNT_INT_EN; /* interrupt on FIFO threshold */
@@ -573,21 +440,20 @@
return tegra_kbc_stop(kbc);
}
-static bool
-tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
- struct device *dev, unsigned int *num_rows)
+static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc,
+ unsigned int *num_rows)
{
int i;
*num_rows = 0;
for (i = 0; i < KBC_MAX_GPIO; i++) {
- const struct tegra_kbc_pin_cfg *pin_cfg = &pdata->pin_cfg[i];
+ const struct tegra_kbc_pin_cfg *pin_cfg = &kbc->pin_cfg[i];
switch (pin_cfg->type) {
case PIN_CFG_ROW:
if (pin_cfg->num >= KBC_MAX_ROW) {
- dev_err(dev,
+ dev_err(kbc->dev,
"pin_cfg[%d]: invalid row number %d\n",
i, pin_cfg->num);
return false;
@@ -597,7 +463,7 @@
case PIN_CFG_COL:
if (pin_cfg->num >= KBC_MAX_COL) {
- dev_err(dev,
+ dev_err(kbc->dev,
"pin_cfg[%d]: invalid column number %d\n",
i, pin_cfg->num);
return false;
@@ -608,7 +474,7 @@
break;
default:
- dev_err(dev,
+ dev_err(kbc->dev,
"pin_cfg[%d]: invalid entry type %d\n",
pin_cfg->type, pin_cfg->num);
return false;
@@ -618,154 +484,140 @@
return true;
}
-#ifdef CONFIG_OF
-static struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
- struct platform_device *pdev)
+static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
{
- struct tegra_kbc_platform_data *pdata;
- struct device_node *np = pdev->dev.of_node;
+ struct device_node *np = kbc->dev->of_node;
u32 prop;
int i;
-
- if (!np)
- return NULL;
-
- pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
+ u32 num_rows = 0;
+ u32 num_cols = 0;
+ u32 cols_cfg[KBC_MAX_GPIO];
+ u32 rows_cfg[KBC_MAX_GPIO];
+ int proplen;
+ int ret;
if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop))
- pdata->debounce_cnt = prop;
+ kbc->debounce_cnt = prop;
if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop))
- pdata->repeat_cnt = prop;
+ kbc->repeat_cnt = prop;
if (of_find_property(np, "nvidia,needs-ghost-filter", NULL))
- pdata->use_ghost_filter = true;
+ kbc->use_ghost_filter = true;
if (of_find_property(np, "nvidia,wakeup-source", NULL))
- pdata->wakeup = true;
+ kbc->wakeup = true;
- /*
- * All currently known keymaps with device tree support use the same
- * pin_cfg, so set it up here.
- */
- for (i = 0; i < KBC_MAX_ROW; i++) {
- pdata->pin_cfg[i].num = i;
- pdata->pin_cfg[i].type = PIN_CFG_ROW;
+ if (!of_get_property(np, "nvidia,kbc-row-pins", &proplen)) {
+ dev_err(kbc->dev, "property nvidia,kbc-row-pins not found\n");
+ return -ENOENT;
+ }
+ num_rows = proplen / sizeof(u32);
+
+ if (!of_get_property(np, "nvidia,kbc-col-pins", &proplen)) {
+ dev_err(kbc->dev, "property nvidia,kbc-col-pins not found\n");
+ return -ENOENT;
+ }
+ num_cols = proplen / sizeof(u32);
+
+ if (!of_get_property(np, "linux,keymap", &proplen)) {
+ dev_err(kbc->dev, "property linux,keymap not found\n");
+ return -ENOENT;
}
- for (i = 0; i < KBC_MAX_COL; i++) {
- pdata->pin_cfg[KBC_MAX_ROW + i].num = i;
- pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL;
+ if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) {
+ dev_err(kbc->dev,
+ "keypad rows/columns not porperly specified\n");
+ return -EINVAL;
}
- return pdata;
-}
-#else
-static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
- struct platform_device *pdev)
-{
- return NULL;
-}
-#endif
+ /* Set all pins as non-configured */
+ for (i = 0; i < KBC_MAX_GPIO; i++)
+ kbc->pin_cfg[i].type = PIN_CFG_IGNORE;
-static int tegra_kbd_setup_keymap(struct tegra_kbc *kbc)
-{
- const struct tegra_kbc_platform_data *pdata = kbc->pdata;
- const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
- unsigned int keymap_rows = KBC_MAX_KEY;
- int retval;
-
- if (keymap_data && pdata->use_fn_map)
- keymap_rows *= 2;
-
- retval = matrix_keypad_build_keymap(keymap_data, NULL,
- keymap_rows, KBC_MAX_COL,
- kbc->keycode, kbc->idev);
- if (retval == -ENOSYS || retval == -ENOENT) {
- /*
- * If there is no OF support in kernel or keymap
- * property is missing, use default keymap.
- */
- retval = matrix_keypad_build_keymap(
- &tegra_kbc_default_keymap_data, NULL,
- keymap_rows, KBC_MAX_COL,
- kbc->keycode, kbc->idev);
+ ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins",
+ rows_cfg, num_rows);
+ if (ret < 0) {
+ dev_err(kbc->dev, "Rows configurations are not proper\n");
+ return -EINVAL;
}
- return retval;
+ ret = of_property_read_u32_array(np, "nvidia,kbc-col-pins",
+ cols_cfg, num_cols);
+ if (ret < 0) {
+ dev_err(kbc->dev, "Cols configurations are not proper\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_rows; i++) {
+ kbc->pin_cfg[rows_cfg[i]].type = PIN_CFG_ROW;
+ kbc->pin_cfg[rows_cfg[i]].num = i;
+ }
+
+ for (i = 0; i < num_cols; i++) {
+ kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL;
+ kbc->pin_cfg[cols_cfg[i]].num = i;
+ }
+
+ return 0;
}
static int tegra_kbc_probe(struct platform_device *pdev)
{
- const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
struct tegra_kbc *kbc;
- struct input_dev *input_dev;
struct resource *res;
- int irq;
int err;
int num_rows = 0;
unsigned int debounce_cnt;
unsigned int scan_time_rows;
+ unsigned int keymap_rows = KBC_MAX_KEY;
- if (!pdata)
- pdata = tegra_kbc_dt_parse_pdata(pdev);
-
- if (!pdata)
- return -EINVAL;
-
- if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) {
- err = -EINVAL;
- goto err_free_pdata;
+ kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL);
+ if (!kbc) {
+ dev_err(&pdev->dev, "failed to alloc memory for kbc\n");
+ return -ENOMEM;
}
+ kbc->dev = &pdev->dev;
+ spin_lock_init(&kbc->lock);
+
+ err = tegra_kbc_parse_dt(kbc);
+ if (err)
+ return err;
+
+ if (!tegra_kbc_check_pin_cfg(kbc, &num_rows))
+ return -EINVAL;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
- err = -ENXIO;
- goto err_free_pdata;
+ return -ENXIO;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
+ kbc->irq = platform_get_irq(pdev, 0);
+ if (kbc->irq < 0) {
dev_err(&pdev->dev, "failed to get keyboard IRQ\n");
- err = -ENXIO;
- goto err_free_pdata;
+ return -ENXIO;
}
- kbc = kzalloc(sizeof(*kbc), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!kbc || !input_dev) {
- err = -ENOMEM;
- goto err_free_mem;
+ kbc->idev = devm_input_allocate_device(&pdev->dev);
+ if (!kbc->idev) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ return -ENOMEM;
}
- kbc->pdata = pdata;
- kbc->idev = input_dev;
- kbc->irq = irq;
- spin_lock_init(&kbc->lock);
setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc);
- res = request_mem_region(res->start, resource_size(res), pdev->name);
- if (!res) {
- dev_err(&pdev->dev, "failed to request I/O memory\n");
- err = -EBUSY;
- goto err_free_mem;
- }
-
- kbc->mmio = ioremap(res->start, resource_size(res));
+ kbc->mmio = devm_request_and_ioremap(&pdev->dev, res);
if (!kbc->mmio) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- err = -ENXIO;
- goto err_free_mem_region;
+ dev_err(&pdev->dev, "Cannot request memregion/iomap address\n");
+ return -EBUSY;
}
- kbc->clk = clk_get(&pdev->dev, NULL);
+ kbc->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(kbc->clk)) {
dev_err(&pdev->dev, "failed to get keyboard clock\n");
- err = PTR_ERR(kbc->clk);
- goto err_iounmap;
+ return PTR_ERR(kbc->clk);
}
/*
@@ -774,37 +626,38 @@
* the rows. There is an additional delay before the row scanning
* starts. The repoll delay is computed in milliseconds.
*/
- debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+ debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows;
- kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt;
+ kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + kbc->repeat_cnt;
kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
- kbc->wakeup_key = pdata->wakeup_key;
- kbc->use_fn_map = pdata->use_fn_map;
- kbc->use_ghost_filter = pdata->use_ghost_filter;
+ kbc->idev->name = pdev->name;
+ kbc->idev->id.bustype = BUS_HOST;
+ kbc->idev->dev.parent = &pdev->dev;
+ kbc->idev->open = tegra_kbc_open;
+ kbc->idev->close = tegra_kbc_close;
- input_dev->name = pdev->name;
- input_dev->id.bustype = BUS_HOST;
- input_dev->dev.parent = &pdev->dev;
- input_dev->open = tegra_kbc_open;
- input_dev->close = tegra_kbc_close;
+ if (kbc->keymap_data && kbc->use_fn_map)
+ keymap_rows *= 2;
- err = tegra_kbd_setup_keymap(kbc);
+ err = matrix_keypad_build_keymap(kbc->keymap_data, NULL,
+ keymap_rows, KBC_MAX_COL,
+ kbc->keycode, kbc->idev);
if (err) {
dev_err(&pdev->dev, "failed to setup keymap\n");
- goto err_put_clk;
+ return err;
}
- __set_bit(EV_REP, input_dev->evbit);
- input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ __set_bit(EV_REP, kbc->idev->evbit);
+ input_set_capability(kbc->idev, EV_MSC, MSC_SCAN);
- input_set_drvdata(input_dev, kbc);
+ input_set_drvdata(kbc->idev, kbc);
- err = request_irq(kbc->irq, tegra_kbc_isr,
+ err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr,
IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
if (err) {
dev_err(&pdev->dev, "failed to request keyboard IRQ\n");
- goto err_put_clk;
+ return err;
}
disable_irq(kbc->irq);
@@ -812,60 +665,28 @@
err = input_register_device(kbc->idev);
if (err) {
dev_err(&pdev->dev, "failed to register input device\n");
- goto err_free_irq;
+ return err;
}
platform_set_drvdata(pdev, kbc);
- device_init_wakeup(&pdev->dev, pdata->wakeup);
-
- return 0;
-
-err_free_irq:
- free_irq(kbc->irq, pdev);
-err_put_clk:
- clk_put(kbc->clk);
-err_iounmap:
- iounmap(kbc->mmio);
-err_free_mem_region:
- release_mem_region(res->start, resource_size(res));
-err_free_mem:
- input_free_device(input_dev);
- kfree(kbc);
-err_free_pdata:
- if (!pdev->dev.platform_data)
- kfree(pdata);
-
- return err;
-}
-
-static int tegra_kbc_remove(struct platform_device *pdev)
-{
- struct tegra_kbc *kbc = platform_get_drvdata(pdev);
- struct resource *res;
-
- platform_set_drvdata(pdev, NULL);
-
- free_irq(kbc->irq, pdev);
- clk_put(kbc->clk);
-
- input_unregister_device(kbc->idev);
- iounmap(kbc->mmio);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
- /*
- * If we do not have platform data attached to the device we
- * allocated it ourselves and thus need to free it.
- */
- if (!pdev->dev.platform_data)
- kfree(kbc->pdata);
-
- kfree(kbc);
+ device_init_wakeup(&pdev->dev, kbc->wakeup);
return 0;
}
#ifdef CONFIG_PM_SLEEP
+static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable)
+{
+ u32 val;
+
+ val = readl(kbc->mmio + KBC_CONTROL_0);
+ if (enable)
+ val |= KBC_CONTROL_KEYPRESS_INT_EN;
+ else
+ val &= ~KBC_CONTROL_KEYPRESS_INT_EN;
+ writel(val, kbc->mmio + KBC_CONTROL_0);
+}
+
static int tegra_kbc_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -954,7 +775,6 @@
static struct platform_driver tegra_kbc_driver = {
.probe = tegra_kbc_probe,
- .remove = tegra_kbc_remove,
.driver = {
.name = "tegra-kbc",
.owner = THIS_MODULE,
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 1cf72fe..0735de3 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -232,7 +232,7 @@
.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY {x,y,z} */
.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
- .fifo_mode = FIFO_STREAM,
+ .fifo_mode = ADXL_FIFO_STREAM,
.watermark = 0,
};
@@ -732,7 +732,7 @@
mutex_init(&ac->mutex);
input_dev->name = "ADXL34x accelerometer";
- revid = ac->bops->read(dev, DEVID);
+ revid = AC_READ(ac, DEVID);
switch (revid) {
case ID_ADXL345:
@@ -809,7 +809,7 @@
if (FIFO_MODE(pdata->fifo_mode) == FIFO_BYPASS)
ac->fifo_delay = false;
- ac->bops->write(dev, POWER_CTL, 0);
+ AC_WRITE(ac, POWER_CTL, 0);
err = request_threaded_irq(ac->irq, NULL, adxl34x_irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
@@ -827,7 +827,6 @@
if (err)
goto err_remove_attr;
- AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
AC_WRITE(ac, OFSX, pdata->x_axis_offset);
ac->hwcal.x = pdata->x_axis_offset;
AC_WRITE(ac, OFSY, pdata->y_axis_offset);
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index 26f1313..5d44023 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -121,7 +121,7 @@
return err;
}
-static int atlas_acpi_button_remove(struct acpi_device *device, int type)
+static int atlas_acpi_button_remove(struct acpi_device *device)
{
acpi_status status;
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index 08ffcab..865c2f9 100644
--- a/drivers/input/misc/bma150.c
+++ b/drivers/input/misc/bma150.c
@@ -46,18 +46,6 @@
#define BMA150_POLL_MAX 200
#define BMA150_POLL_MIN 0
-#define BMA150_BW_25HZ 0
-#define BMA150_BW_50HZ 1
-#define BMA150_BW_100HZ 2
-#define BMA150_BW_190HZ 3
-#define BMA150_BW_375HZ 4
-#define BMA150_BW_750HZ 5
-#define BMA150_BW_1500HZ 6
-
-#define BMA150_RANGE_2G 0
-#define BMA150_RANGE_4G 1
-#define BMA150_RANGE_8G 2
-
#define BMA150_MODE_NORMAL 0
#define BMA150_MODE_SLEEP 2
#define BMA150_MODE_WAKE_UP 3
@@ -372,7 +360,7 @@
int error;
error = pm_runtime_get_sync(&bma150->client->dev);
- if (error && error != -ENOSYS)
+ if (error < 0 && error != -ENOSYS)
return error;
/*
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 78eb6b3..68a5f33 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -43,7 +43,6 @@
struct device *dev;
struct input_dev *input_dev;
- struct workqueue_struct *workqueue;
struct work_struct play_work;
bool enabled;
@@ -143,19 +142,7 @@
if (!info->speed)
info->speed = effect->u.rumble.weak_magnitude >> 9;
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
- queue_work(info->workqueue, &info->play_work);
- return 0;
-}
-
-static int twl4030_vibra_open(struct input_dev *input)
-{
- struct vibra_info *info = input_get_drvdata(input);
-
- info->workqueue = create_singlethread_workqueue("vibra");
- if (info->workqueue == NULL) {
- dev_err(&input->dev, "couldn't create workqueue\n");
- return -ENOMEM;
- }
+ schedule_work(&info->play_work);
return 0;
}
@@ -164,9 +151,6 @@
struct vibra_info *info = input_get_drvdata(input);
cancel_work_sync(&info->play_work);
- INIT_WORK(&info->play_work, vibra_play_work); /* cleanup */
- destroy_workqueue(info->workqueue);
- info->workqueue = NULL;
if (info->enabled)
vibra_disable(info);
@@ -219,7 +203,7 @@
return -EINVAL;
}
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -227,11 +211,10 @@
info->coexist = twl4030_vibra_check_coexist(pdata, twl4030_core_node);
INIT_WORK(&info->play_work, vibra_play_work);
- info->input_dev = input_allocate_device();
+ info->input_dev = devm_input_allocate_device(&pdev->dev);
if (info->input_dev == NULL) {
dev_err(&pdev->dev, "couldn't allocate input device\n");
- ret = -ENOMEM;
- goto err_kzalloc;
+ return -ENOMEM;
}
input_set_drvdata(info->input_dev, info);
@@ -239,14 +222,13 @@
info->input_dev->name = "twl4030:vibrator";
info->input_dev->id.version = 1;
info->input_dev->dev.parent = pdev->dev.parent;
- info->input_dev->open = twl4030_vibra_open;
info->input_dev->close = twl4030_vibra_close;
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
if (ret < 0) {
dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
- goto err_ialloc;
+ return ret;
}
ret = input_register_device(info->input_dev);
@@ -262,28 +244,11 @@
err_iff:
input_ff_destroy(info->input_dev);
-err_ialloc:
- input_free_device(info->input_dev);
-err_kzalloc:
- kfree(info);
return ret;
}
-static int twl4030_vibra_remove(struct platform_device *pdev)
-{
- struct vibra_info *info = platform_get_drvdata(pdev);
-
- /* this also free ff-memless and calls close if needed */
- input_unregister_device(info->input_dev);
- kfree(info);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
static struct platform_driver twl4030_vibra_driver = {
.probe = twl4030_vibra_probe,
- .remove = twl4030_vibra_remove,
.driver = {
.name = "twl4030-vibra",
.owner = THIS_MODULE,
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 71a28ee..0c2dfc8 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -275,7 +275,7 @@
return -EINVAL;
}
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "couldn't allocate memory\n");
return -ENOMEM;
@@ -309,24 +309,65 @@
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
- ret = -EINVAL;
- goto err_kzalloc;
+ return -EINVAL;
}
info->irq = platform_get_irq(pdev, 0);
if (info->irq < 0) {
dev_err(info->dev, "invalid irq\n");
- ret = -EINVAL;
- goto err_kzalloc;
+ return -EINVAL;
}
mutex_init(&info->mutex);
+ ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+ twl6040_vib_irq_handler, 0,
+ "twl6040_irq_vib", info);
+ if (ret) {
+ dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
+ return ret;
+ }
+
+ info->supplies[0].supply = "vddvibl";
+ info->supplies[1].supply = "vddvibr";
+ /*
+ * When booted with Device tree the regulators are attached to the
+ * parent device (twl6040 MFD core)
+ */
+ ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
+ ARRAY_SIZE(info->supplies), info->supplies);
+ if (ret) {
+ dev_err(info->dev, "couldn't get regulators %d\n", ret);
+ return ret;
+ }
+
+ if (vddvibl_uV) {
+ ret = regulator_set_voltage(info->supplies[0].consumer,
+ vddvibl_uV, vddvibl_uV);
+ if (ret) {
+ dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
+ ret);
+ goto err_regulator;
+ }
+ }
+
+ if (vddvibr_uV) {
+ ret = regulator_set_voltage(info->supplies[1].consumer,
+ vddvibr_uV, vddvibr_uV);
+ if (ret) {
+ dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
+ ret);
+ goto err_regulator;
+ }
+ }
+
+ INIT_WORK(&info->play_work, vibra_play_work);
+
info->input_dev = input_allocate_device();
if (info->input_dev == NULL) {
dev_err(info->dev, "couldn't allocate input device\n");
ret = -ENOMEM;
- goto err_kzalloc;
+ goto err_regulator;
}
input_set_drvdata(info->input_dev, info);
@@ -351,70 +392,14 @@
platform_set_drvdata(pdev, info);
- ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
- "twl6040_irq_vib", info);
- if (ret) {
- dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
- goto err_irq;
- }
-
- info->supplies[0].supply = "vddvibl";
- info->supplies[1].supply = "vddvibr";
- /*
- * When booted with Device tree the regulators are attached to the
- * parent device (twl6040 MFD core)
- */
- ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
- ARRAY_SIZE(info->supplies), info->supplies);
- if (ret) {
- dev_err(info->dev, "couldn't get regulators %d\n", ret);
- goto err_regulator;
- }
-
- if (vddvibl_uV) {
- ret = regulator_set_voltage(info->supplies[0].consumer,
- vddvibl_uV, vddvibl_uV);
- if (ret) {
- dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
- ret);
- goto err_voltage;
- }
- }
-
- if (vddvibr_uV) {
- ret = regulator_set_voltage(info->supplies[1].consumer,
- vddvibr_uV, vddvibr_uV);
- if (ret) {
- dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
- ret);
- goto err_voltage;
- }
- }
-
- info->workqueue = alloc_workqueue("twl6040-vibra", 0, 0);
- if (info->workqueue == NULL) {
- dev_err(info->dev, "couldn't create workqueue\n");
- ret = -ENOMEM;
- goto err_voltage;
- }
- INIT_WORK(&info->play_work, vibra_play_work);
-
return 0;
-err_voltage:
- regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-err_regulator:
- free_irq(info->irq, info);
-err_irq:
- input_unregister_device(info->input_dev);
- info->input_dev = NULL;
err_iff:
- if (info->input_dev)
- input_ff_destroy(info->input_dev);
+ input_ff_destroy(info->input_dev);
err_ialloc:
input_free_device(info->input_dev);
-err_kzalloc:
- kfree(info);
+err_regulator:
+ regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
return ret;
}
@@ -423,10 +408,7 @@
struct vibra_info *info = platform_get_drvdata(pdev);
input_unregister_device(info->input_dev);
- free_irq(info->irq, info);
regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
- destroy_workqueue(info->workqueue);
- kfree(info);
return 0;
}
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index 558767d..caa2c406 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -86,7 +86,7 @@
wm831x_on->wm831x = wm831x;
INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
- wm831x_on->dev = input_allocate_device();
+ wm831x_on->dev = devm_input_allocate_device(&pdev->dev);
if (!wm831x_on->dev) {
dev_err(&pdev->dev, "Can't allocate input dev\n");
ret = -ENOMEM;
@@ -119,7 +119,6 @@
err_irq:
free_irq(irq, wm831x_on);
err_input_dev:
- input_free_device(wm831x_on->dev);
err:
return ret;
}
@@ -131,7 +130,6 @@
free_irq(irq, wm831x_on);
cancel_delayed_work_sync(&wm831x_on->work);
- input_unregister_device(wm831x_on->dev);
return 0;
}
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index cd6268c..802bd6a 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -68,6 +68,16 @@
If unsure, say Y.
+config MOUSE_PS2_CYPRESS
+ bool "Cypress PS/2 mouse protocol extension" if EXPERT
+ default y
+ depends on MOUSE_PS2
+ help
+ Say Y here if you have a Cypress PS/2 Trackpad connected to
+ your system.
+
+ If unsure, say Y.
+
config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT
default y
@@ -193,6 +203,18 @@
To compile this driver as a module, choose M here: the
module will be called bcm5974.
+config MOUSE_CYAPA
+ tristate "Cypress APA I2C Trackpad support"
+ depends on I2C
+ help
+ This driver adds support for Cypress All Points Addressable (APA)
+ I2C Trackpads, including the ones used in 2012 Samsung Chromebooks.
+
+ Say Y here if you have a Cypress APA I2C Trackpad.
+
+ To compile this driver as a module, choose M here: the module will be
+ called cyapa.
+
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 46ba755..c25efdb 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
+obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o
obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
@@ -32,3 +33,4 @@
psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o
psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index e229fa3..7b99fc7 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -27,14 +27,11 @@
/*
* Definitions for ALPS version 3 and 4 command mode protocol
*/
-#define ALPS_V3_X_MAX 2000
-#define ALPS_V3_Y_MAX 1400
-
-#define ALPS_BITMAP_X_BITS 15
-#define ALPS_BITMAP_Y_BITS 11
-
#define ALPS_CMD_NIBBLE_10 0x01f2
+#define ALPS_REG_BASE_RUSHMORE 0xc2c0
+#define ALPS_REG_BASE_PINNACLE 0x0000
+
static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
{ PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
{ PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
@@ -109,11 +106,14 @@
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
- { { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
- { { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
+static void alps_set_abs_params_st(struct alps_data *priv,
+ struct input_dev *dev1);
+static void alps_set_abs_params_mt(struct alps_data *priv,
+ struct input_dev *dev1);
+
/*
* XXX - this entry is suspicious. First byte has zero lower nibble,
* which is what a normal mouse would report. Also, the value 0x0e
@@ -122,10 +122,10 @@
/* Packet formats are described in Documentation/input/alps.txt */
-static bool alps_is_valid_first_byte(const struct alps_model_info *model,
+static bool alps_is_valid_first_byte(struct alps_data *priv,
unsigned char data)
{
- return (data & model->mask0) == model->byte0;
+ return (data & priv->mask0) == priv->byte0;
}
static void alps_report_buttons(struct psmouse *psmouse,
@@ -158,14 +158,13 @@
static void alps_process_packet_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
- if (model->proto_version == ALPS_PROTO_V1) {
+ if (priv->proto_version == ALPS_PROTO_V1) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
middle = 0;
@@ -181,12 +180,12 @@
z = packet[5];
}
- if (model->flags & ALPS_FW_BK_1) {
+ if (priv->flags & ALPS_FW_BK_1) {
back = packet[0] & 0x10;
forward = packet[2] & 4;
}
- if (model->flags & ALPS_FW_BK_2) {
+ if (priv->flags & ALPS_FW_BK_2) {
back = packet[3] & 4;
forward = packet[2] & 4;
if ((middle = forward && back))
@@ -196,7 +195,7 @@
ges = packet[2] & 1;
fin = packet[2] & 2;
- if ((model->flags & ALPS_DUALPOINT) && z == 127) {
+ if ((priv->flags & ALPS_DUALPOINT) && z == 127) {
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
@@ -239,15 +238,15 @@
input_report_abs(dev, ABS_PRESSURE, z);
input_report_key(dev, BTN_TOOL_FINGER, z > 0);
- if (model->flags & ALPS_WHEEL)
+ if (priv->flags & ALPS_WHEEL)
input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
input_report_key(dev, BTN_FORWARD, forward);
input_report_key(dev, BTN_BACK, back);
}
- if (model->flags & ALPS_FOUR_BUTTONS) {
+ if (priv->flags & ALPS_FOUR_BUTTONS) {
input_report_key(dev, BTN_0, packet[2] & 4);
input_report_key(dev, BTN_1, packet[0] & 0x10);
input_report_key(dev, BTN_2, packet[3] & 4);
@@ -267,7 +266,8 @@
* These points are returned in x1, y1, x2, and y2 when the return value
* is greater than 0.
*/
-static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+static int alps_process_bitmap(struct alps_data *priv,
+ unsigned int x_map, unsigned int y_map,
int *x1, int *y1, int *x2, int *y2)
{
struct alps_bitmap_point {
@@ -309,7 +309,7 @@
* y bitmap is reversed for what we need (lower positions are in
* higher bits), so we process from the top end.
*/
- y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits);
prev_bit = 0;
point = &y_low;
for (i = 0; y_map != 0; i++, y_map <<= 1) {
@@ -355,16 +355,18 @@
}
}
- *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
if (fingers > 1) {
- *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x2 = (priv->x_max *
+ (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y2 = (priv->y_max *
+ (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
}
return fingers;
@@ -448,17 +450,57 @@
return;
}
+static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
+{
+ f->left = !!(p[3] & 0x01);
+ f->right = !!(p[3] & 0x02);
+ f->middle = !!(p[3] & 0x04);
+
+ f->ts_left = !!(p[3] & 0x10);
+ f->ts_right = !!(p[3] & 0x20);
+ f->ts_middle = !!(p[3] & 0x40);
+}
+
+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[4] & 0x40);
+ f->is_mp = !!(p[0] & 0x40);
+
+ f->fingers = (p[5] & 0x3) + 1;
+ f->x_map = ((p[4] & 0x7e) << 8) |
+ ((p[1] & 0x7f) << 2) |
+ ((p[0] & 0x30) >> 4);
+ f->y_map = ((p[3] & 0x70) << 4) |
+ ((p[2] & 0x7f) << 1) |
+ (p[4] & 0x01);
+
+ f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
+ ((p[0] & 0x30) >> 4);
+ f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
+ f->z = p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
+{
+ alps_decode_pinnacle(f, p);
+
+ f->x_map |= (p[5] & 0x10) << 11;
+ f->y_map |= (p[5] & 0x20) << 6;
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
- int x, y, z;
- int left, right, middle;
int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
int fingers = 0, bmap_fingers;
- unsigned int x_bitmap, y_bitmap;
+ struct alps_fields f;
+
+ priv->decode_fields(&f, packet);
/*
* There's no single feature of touchpad position and bitmap packets
@@ -473,16 +515,10 @@
* packet. Check for this, and when it happens process the
* position packet as usual.
*/
- if (packet[0] & 0x40) {
- fingers = (packet[5] & 0x3) + 1;
- x_bitmap = ((packet[4] & 0x7e) << 8) |
- ((packet[1] & 0x7f) << 2) |
- ((packet[0] & 0x30) >> 4);
- y_bitmap = ((packet[3] & 0x70) << 4) |
- ((packet[2] & 0x7f) << 1) |
- (packet[4] & 0x01);
-
- bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ if (f.is_mp) {
+ fingers = f.fingers;
+ bmap_fingers = alps_process_bitmap(priv,
+ f.x_map, f.y_map,
&x1, &y1, &x2, &y2);
/*
@@ -493,7 +529,7 @@
fingers = bmap_fingers;
/* Now process position packet */
- packet = priv->multi_data;
+ priv->decode_fields(&f, priv->multi_data);
} else {
priv->multi_packet = 0;
}
@@ -507,10 +543,10 @@
* out misidentified bitmap packets, we reject anything with this
* bit set.
*/
- if (packet[0] & 0x40)
+ if (f.is_mp)
return;
- if (!priv->multi_packet && (packet[4] & 0x40)) {
+ if (!priv->multi_packet && f.first_mp) {
priv->multi_packet = 1;
memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
return;
@@ -518,22 +554,13 @@
priv->multi_packet = 0;
- left = packet[3] & 0x01;
- right = packet[3] & 0x02;
- middle = packet[3] & 0x04;
-
- x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) |
- ((packet[0] & 0x30) >> 4);
- y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f);
- z = packet[5] & 0x7f;
-
/*
* Sometimes the hardware sends a single packet with z = 0
* in the middle of a stream. Real releases generate packets
* with x, y, and z all zero, so these seem to be flukes.
* Ignore them.
*/
- if (x && y && !z)
+ if (f.x && f.y && !f.z)
return;
/*
@@ -541,12 +568,12 @@
* to rely on ST data.
*/
if (!fingers) {
- x1 = x;
- y1 = y;
- fingers = z > 0 ? 1 : 0;
+ x1 = f.x;
+ y1 = f.y;
+ fingers = f.z > 0 ? 1 : 0;
}
- if (z >= 64)
+ if (f.z >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
@@ -555,26 +582,22 @@
input_mt_report_finger_count(dev, fingers);
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev, BTN_MIDDLE, middle);
+ input_report_key(dev, BTN_LEFT, f.left);
+ input_report_key(dev, BTN_RIGHT, f.right);
+ input_report_key(dev, BTN_MIDDLE, f.middle);
- if (z > 0) {
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
+ if (f.z > 0) {
+ input_report_abs(dev, ABS_X, f.x);
+ input_report_abs(dev, ABS_Y, f.y);
}
- input_report_abs(dev, ABS_PRESSURE, z);
+ input_report_abs(dev, ABS_PRESSURE, f.z);
input_sync(dev);
if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
- left = packet[3] & 0x10;
- right = packet[3] & 0x20;
- middle = packet[3] & 0x40;
-
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- input_report_key(dev2, BTN_MIDDLE, middle);
+ input_report_key(dev2, BTN_LEFT, f.ts_left);
+ input_report_key(dev2, BTN_RIGHT, f.ts_right);
+ input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
input_sync(dev2);
}
}
@@ -639,7 +662,7 @@
((priv->multi_data[3] & 0x1f) << 5) |
(priv->multi_data[1] & 0x1f);
- fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/* Store MT data.*/
@@ -696,25 +719,6 @@
input_sync(dev);
}
-static void alps_process_packet(struct psmouse *psmouse)
-{
- struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
-
- switch (model->proto_version) {
- case ALPS_PROTO_V1:
- case ALPS_PROTO_V2:
- alps_process_packet_v1_v2(psmouse);
- break;
- case ALPS_PROTO_V3:
- alps_process_packet_v3(psmouse);
- break;
- case ALPS_PROTO_V4:
- alps_process_packet_v4(psmouse);
- break;
- }
-}
-
static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
unsigned char packet[],
bool report_buttons)
@@ -765,14 +769,14 @@
if (((psmouse->packet[3] |
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) ||
- (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
+ (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) {
psmouse_dbg(psmouse,
"refusing packet %4ph (suspected interleaved ps/2)\n",
psmouse->packet + 3);
return PSMOUSE_BAD_DATA;
}
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
/* Continue with the next packet */
psmouse->packet[0] = psmouse->packet[6];
@@ -816,6 +820,7 @@
static void alps_flush_packet(unsigned long data)
{
struct psmouse *psmouse = (struct psmouse *)data;
+ struct alps_data *priv = psmouse->private;
serio_pause_rx(psmouse->ps2dev.serio);
@@ -833,7 +838,7 @@
"refusing packet %3ph (suspected interleaved ps/2)\n",
psmouse->packet + 3);
} else {
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
}
psmouse->pktcnt = 0;
}
@@ -844,7 +849,6 @@
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
if (psmouse->pktcnt == 3) {
@@ -857,15 +861,15 @@
/* Check for PS/2 packet stuffed in the middle of ALPS packet. */
- if ((model->flags & ALPS_PS2_INTERLEAVED) &&
+ if ((priv->flags & ALPS_PS2_INTERLEAVED) &&
psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
return alps_handle_interleaved_ps2(psmouse);
}
- if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
+ if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) {
psmouse_dbg(psmouse,
"refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
- psmouse->packet[0], model->mask0, model->byte0);
+ psmouse->packet[0], priv->mask0, priv->byte0);
return PSMOUSE_BAD_DATA;
}
@@ -879,7 +883,7 @@
}
if (psmouse->pktcnt == psmouse->pktsize) {
- alps_process_packet(psmouse);
+ priv->process_packet(psmouse);
return PSMOUSE_FULL_PACKET;
}
@@ -967,24 +971,42 @@
return __alps_command_mode_write_reg(psmouse, value);
}
+static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
+ int repeated_command, unsigned char *param)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ param[0] = 0;
+ if (init_command && ps2_command(ps2dev, param, init_command))
+ return -EIO;
+
+ if (ps2_command(ps2dev, NULL, repeated_command) ||
+ ps2_command(ps2dev, NULL, repeated_command) ||
+ ps2_command(ps2dev, NULL, repeated_command))
+ return -EIO;
+
+ param[0] = param[1] = param[2] = 0xff;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return -EIO;
+
+ psmouse_dbg(psmouse, "%2.2X report: %2.2x %2.2x %2.2x\n",
+ repeated_command, param[0], param[1], param[2]);
+ return 0;
+}
+
static int alps_enter_command_mode(struct psmouse *psmouse,
unsigned char *resp)
{
unsigned char param[4];
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) {
psmouse_err(psmouse, "failed to enter command mode\n");
return -1;
}
- if (param[0] != 0x88 && param[1] != 0x07) {
+ if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
psmouse_dbg(psmouse,
- "unknown response while entering command mode: %2.2x %2.2x %2.2x\n",
- param[0], param[1], param[2]);
+ "unknown response while entering command mode\n");
return -1;
}
@@ -1001,99 +1023,6 @@
return 0;
}
-static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
- unsigned char param[4];
- const struct alps_model_info *model = NULL;
- int i;
-
- /*
- * First try "E6 report".
- * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
- * The bits 0-2 of the first byte will be 1s if some buttons are
- * pressed.
- */
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
- if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
- (param[2] != 10 && param[2] != 100))
- return NULL;
-
- /*
- * Now try "E7 report". Allowed responses are in
- * alps_model_data[].signature
- */
- param[0] = 0;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
- if (version) {
- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
- /* empty */;
- *version = (param[0] << 8) | (param[1] << 4) | i;
- }
-
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (!memcmp(param, alps_model_data[i].signature,
- sizeof(alps_model_data[i].signature))) {
- model = alps_model_data + i;
- break;
- }
- }
-
- if (model && model->proto_version > ALPS_PROTO_V2) {
- /*
- * Need to check command mode response to identify
- * model
- */
- model = NULL;
- if (alps_enter_command_mode(psmouse, param)) {
- psmouse_warn(psmouse,
- "touchpad failed to enter command mode\n");
- } else {
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
- if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
- alps_model_data[i].command_mode_resp == param[0]) {
- model = alps_model_data + i;
- break;
- }
- }
- alps_exit_command_mode(psmouse);
-
- if (!model)
- psmouse_dbg(psmouse,
- "Unknown command mode response %2.2x\n",
- param[0]);
- }
- }
-
- return model;
-}
-
/*
* For DualPoint devices select the device that should respond to
* subsequent commands. It looks like glidepad is behind stickpointer,
@@ -1137,18 +1066,10 @@
static int alps_get_status(struct psmouse *psmouse, char *param)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
-
/* Get status: 0xF5 0xF5 0xF5 0xE9 */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param))
return -1;
- psmouse_dbg(psmouse, "Status: %2.2x %2.2x %2.2x",
- param[0], param[1], param[2]);
-
return 0;
}
@@ -1190,16 +1111,16 @@
unsigned char buf[sizeof(psmouse->packet)];
bool poll_failed;
- if (priv->i->flags & ALPS_PASS)
+ if (priv->flags & ALPS_PASS)
alps_passthrough_mode_v2(psmouse, true);
poll_failed = ps2_command(&psmouse->ps2dev, buf,
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
- if (priv->i->flags & ALPS_PASS)
+ if (priv->flags & ALPS_PASS)
alps_passthrough_mode_v2(psmouse, false);
- if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
+ if (poll_failed || (buf[0] & priv->mask0) != priv->byte0)
return -1;
if ((psmouse->badbyte & 0xc8) == 0x08) {
@@ -1217,9 +1138,8 @@
static int alps_hw_init_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
- if ((model->flags & ALPS_PASS) &&
+ if ((priv->flags & ALPS_PASS) &&
alps_passthrough_mode_v2(psmouse, true)) {
return -1;
}
@@ -1234,7 +1154,7 @@
return -1;
}
- if ((model->flags & ALPS_PASS) &&
+ if ((priv->flags & ALPS_PASS) &&
alps_passthrough_mode_v2(psmouse, false)) {
return -1;
}
@@ -1249,26 +1169,31 @@
}
/*
- * Enable or disable passthrough mode to the trackstick. Must be in
- * command mode when calling this function.
+ * Enable or disable passthrough mode to the trackstick.
*/
-static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable)
+static int alps_passthrough_mode_v3(struct psmouse *psmouse,
+ int reg_base, bool enable)
{
- int reg_val;
+ int reg_val, ret = -1;
- reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
- if (reg_val == -1)
+ if (alps_enter_command_mode(psmouse, NULL))
return -1;
+ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
+ if (reg_val == -1)
+ goto error;
+
if (enable)
reg_val |= 0x01;
else
reg_val &= ~0x01;
- if (__alps_command_mode_write_reg(psmouse, reg_val))
- return -1;
+ ret = __alps_command_mode_write_reg(psmouse, reg_val);
- return 0;
+error:
+ if (alps_exit_command_mode(psmouse))
+ ret = -1;
+ return ret;
}
/* Must be in command mode when calling this function */
@@ -1287,73 +1212,102 @@
return 0;
}
-static int alps_hw_init_v3(struct psmouse *psmouse)
+static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
{
- struct alps_data *priv = psmouse->private;
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- int reg_val;
- unsigned char param[4];
-
- priv->nibble_commands = alps_v3_nibble_commands;
- priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ int ret = -EIO, reg_val;
if (alps_enter_command_mode(psmouse, NULL))
goto error;
- /* Check for trackstick */
- reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
if (reg_val == -1)
goto error;
- if (reg_val & 0x80) {
- if (alps_passthrough_mode_v3(psmouse, true))
- goto error;
- if (alps_exit_command_mode(psmouse))
- goto error;
+
+ /* bit 7: trackstick is present */
+ ret = reg_val & 0x80 ? 0 : -ENODEV;
+
+error:
+ alps_exit_command_mode(psmouse);
+ return ret;
+}
+
+static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int ret = 0;
+ unsigned char param[4];
+
+ if (alps_passthrough_mode_v3(psmouse, reg_base, true))
+ return -EIO;
+
+ /*
+ * E7 report for the trackstick
+ *
+ * There have been reports of failures to seem to trace back
+ * to the above trackstick check failing. When these occur
+ * this E7 report fails, so when that happens we continue
+ * with the assumption that there isn't a trackstick after
+ * all.
+ */
+ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
+ psmouse_warn(psmouse, "trackstick E7 report failed\n");
+ ret = -ENODEV;
+ } else {
+ psmouse_dbg(psmouse,
+ "trackstick E7 report: %2.2x %2.2x %2.2x\n",
+ param[0], param[1], param[2]);
/*
- * E7 report for the trackstick
- *
- * There have been reports of failures to seem to trace back
- * to the above trackstick check failing. When these occur
- * this E7 report fails, so when that happens we continue
- * with the assumption that there isn't a trackstick after
- * all.
+ * Not sure what this does, but it is absolutely
+ * essential. Without it, the touchpad does not
+ * work at all and the trackstick just emits normal
+ * PS/2 packets.
*/
- param[0] = 0x64;
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- psmouse_warn(psmouse, "trackstick E7 report failed\n");
- } else {
- psmouse_dbg(psmouse,
- "trackstick E7 report: %2.2x %2.2x %2.2x\n",
- param[0], param[1], param[2]);
-
- /*
- * Not sure what this does, but it is absolutely
- * essential. Without it, the touchpad does not
- * work at all and the trackstick just emits normal
- * PS/2 packets.
- */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
- alps_command_mode_send_nibble(psmouse, 0x9) ||
- alps_command_mode_send_nibble(psmouse, 0x4)) {
- psmouse_err(psmouse,
- "Error sending magic E6 sequence\n");
- goto error_passthrough;
- }
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ alps_command_mode_send_nibble(psmouse, 0x9) ||
+ alps_command_mode_send_nibble(psmouse, 0x4)) {
+ psmouse_err(psmouse,
+ "Error sending magic E6 sequence\n");
+ ret = -EIO;
+ goto error;
}
- if (alps_enter_command_mode(psmouse, NULL))
- goto error_passthrough;
- if (alps_passthrough_mode_v3(psmouse, false))
- goto error;
+ /*
+ * This ensures the trackstick packets are in the format
+ * supported by this driver. If bit 1 isn't set the packet
+ * format is different.
+ */
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_command_mode_write_reg(psmouse,
+ reg_base + 0x08, 0x82) ||
+ alps_exit_command_mode(psmouse))
+ ret = -EIO;
}
- if (alps_absolute_mode_v3(psmouse)) {
+error:
+ if (alps_passthrough_mode_v3(psmouse, reg_base, false))
+ ret = -EIO;
+
+ return ret;
+}
+
+static int alps_hw_init_v3(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int reg_val;
+ unsigned char param[4];
+
+ reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE);
+ if (reg_val == -EIO)
+ goto error;
+ if (reg_val == 0 &&
+ alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
+ goto error;
+
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
}
@@ -1390,14 +1344,6 @@
if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
goto error;
- /*
- * This ensures the trackstick packets are in the format
- * supported by this driver. If bit 1 isn't set the packet
- * format is different.
- */
- if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82))
- goto error;
-
alps_exit_command_mode(psmouse);
/* Set rate and enable data reporting */
@@ -1410,10 +1356,6 @@
return 0;
-error_passthrough:
- /* Something failed while in passthrough mode, so try to get out */
- if (!alps_enter_command_mode(psmouse, NULL))
- alps_passthrough_mode_v3(psmouse, false);
error:
/*
* Leaving the touchpad in command mode will essentially render
@@ -1424,6 +1366,50 @@
return -1;
}
+static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int reg_val, ret = -1;
+
+ if (priv->flags & ALPS_DUALPOINT) {
+ reg_val = alps_setup_trackstick_v3(psmouse,
+ ALPS_REG_BASE_RUSHMORE);
+ if (reg_val == -EIO)
+ goto error;
+ if (reg_val == -ENODEV)
+ priv->flags &= ~ALPS_DUALPOINT;
+ }
+
+ if (alps_enter_command_mode(psmouse, NULL) ||
+ alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
+ alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
+ goto error;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
+ goto error;
+
+ /* enter absolute mode */
+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
+ goto error;
+
+ alps_exit_command_mode(psmouse);
+ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+error:
+ alps_exit_command_mode(psmouse);
+ return ret;
+}
+
/* Must be in command mode when calling this function */
static int alps_absolute_mode_v4(struct psmouse *psmouse)
{
@@ -1442,13 +1428,9 @@
static int alps_hw_init_v4(struct psmouse *psmouse)
{
- struct alps_data *priv = psmouse->private;
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- priv->nibble_commands = alps_v4_nibble_commands;
- priv->addr_command = PSMOUSE_CMD_DISABLE;
-
if (alps_enter_command_mode(psmouse, NULL))
goto error;
@@ -1517,39 +1499,140 @@
return -1;
}
-static int alps_hw_init(struct psmouse *psmouse)
+static void alps_set_defaults(struct alps_data *priv)
{
- struct alps_data *priv = psmouse->private;
- const struct alps_model_info *model = priv->i;
- int ret = -1;
+ priv->byte0 = 0x8f;
+ priv->mask0 = 0x8f;
+ priv->flags = ALPS_DUALPOINT;
- switch (model->proto_version) {
+ priv->x_max = 2000;
+ priv->y_max = 1400;
+ priv->x_bits = 15;
+ priv->y_bits = 11;
+
+ switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
- ret = alps_hw_init_v1_v2(psmouse);
+ priv->hw_init = alps_hw_init_v1_v2;
+ priv->process_packet = alps_process_packet_v1_v2;
+ priv->set_abs_params = alps_set_abs_params_st;
break;
case ALPS_PROTO_V3:
- ret = alps_hw_init_v3(psmouse);
+ priv->hw_init = alps_hw_init_v3;
+ priv->process_packet = alps_process_packet_v3;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->decode_fields = alps_decode_pinnacle;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
break;
case ALPS_PROTO_V4:
- ret = alps_hw_init_v4(psmouse);
+ priv->hw_init = alps_hw_init_v4;
+ priv->process_packet = alps_process_packet_v4;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v4_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
}
+}
- return ret;
+static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
+ unsigned char *e7, unsigned char *ec)
+{
+ const struct alps_model_info *model;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+ model = &alps_model_data[i];
+
+ if (!memcmp(e7, model->signature, sizeof(model->signature)) &&
+ (!model->command_mode_resp ||
+ model->command_mode_resp == ec[2])) {
+
+ priv->proto_version = model->proto_version;
+ alps_set_defaults(priv);
+
+ priv->flags = model->flags;
+ priv->byte0 = model->byte0;
+ priv->mask0 = model->mask0;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
+{
+ unsigned char e6[4], e7[4], ec[4];
+
+ /*
+ * First try "E6 report".
+ * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
+ * The bits 0-2 of the first byte will be 1s if some buttons are
+ * pressed.
+ */
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_SETSCALE11, e6))
+ return -EIO;
+
+ if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100))
+ return -EINVAL;
+
+ /*
+ * Now get the "E7" and "EC" reports. These will uniquely identify
+ * most ALPS touchpads.
+ */
+ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_SETSCALE21, e7) ||
+ alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
+ PSMOUSE_CMD_RESET_WRAP, ec) ||
+ alps_exit_command_mode(psmouse))
+ return -EIO;
+
+ if (alps_match_table(psmouse, priv, e7, ec) == 0) {
+ return 0;
+ } else if (ec[0] == 0x88 && ec[1] == 0x08) {
+ priv->proto_version = ALPS_PROTO_V3;
+ alps_set_defaults(priv);
+
+ priv->hw_init = alps_hw_init_rushmore_v3;
+ priv->decode_fields = alps_decode_rushmore;
+ priv->x_bits = 16;
+ priv->y_bits = 12;
+
+ /* hack to make addr_command, nibble_command available */
+ psmouse->private = priv;
+
+ if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE))
+ priv->flags &= ~ALPS_DUALPOINT;
+
+ return 0;
+ } else if (ec[0] == 0x88 && ec[1] == 0x07 &&
+ ec[2] >= 0x90 && ec[2] <= 0x9d) {
+ priv->proto_version = ALPS_PROTO_V3;
+ alps_set_defaults(priv);
+
+ return 0;
+ }
+
+ psmouse_info(psmouse,
+ "Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n",
+ e7[0], e7[1], e7[2], ec[0], ec[1], ec[2]);
+
+ return -EINVAL;
}
static int alps_reconnect(struct psmouse *psmouse)
{
- const struct alps_model_info *model;
+ struct alps_data *priv = psmouse->private;
psmouse_reset(psmouse);
- model = alps_get_model(psmouse, NULL);
- if (!model)
+ if (alps_identify(psmouse, priv) < 0)
return -1;
- return alps_hw_init(psmouse);
+ return priv->hw_init(psmouse);
}
static void alps_disconnect(struct psmouse *psmouse)
@@ -1562,12 +1645,33 @@
kfree(priv);
}
+static void alps_set_abs_params_st(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+}
+
+static void alps_set_abs_params_mt(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+ input_mt_init_slots(dev1, 2, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
+
+ set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+
+ input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
+}
+
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
- const struct alps_model_info *model;
struct input_dev *dev1 = psmouse->dev, *dev2;
- int version;
priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
dev2 = input_allocate_device();
@@ -1581,13 +1685,10 @@
psmouse_reset(psmouse);
- model = alps_get_model(psmouse, &version);
- if (!model)
+ if (alps_identify(psmouse, priv) < 0)
goto init_fail;
- priv->i = model;
-
- if (alps_hw_init(psmouse))
+ if (priv->hw_init(psmouse))
goto init_fail;
/*
@@ -1609,41 +1710,20 @@
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
- switch (model->proto_version) {
- case ALPS_PROTO_V1:
- case ALPS_PROTO_V2:
- input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
- break;
- case ALPS_PROTO_V3:
- case ALPS_PROTO_V4:
- set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
- input_mt_init_slots(dev1, 2, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
-
- set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
- set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
- set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
-
- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
- break;
- }
-
+ priv->set_abs_params(priv, dev1);
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
- if (model->flags & ALPS_WHEEL) {
+ if (priv->flags & ALPS_WHEEL) {
dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
}
- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
}
- if (model->flags & ALPS_FOUR_BUTTONS) {
+ if (priv->flags & ALPS_FOUR_BUTTONS) {
dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
@@ -1654,7 +1734,8 @@
snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
dev2->phys = priv->phys;
- dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+ dev2->name = (priv->flags & ALPS_DUALPOINT) ?
+ "DualPoint Stick" : "PS/2 Mouse";
dev2->id.bustype = BUS_I8042;
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_ALPS;
@@ -1673,7 +1754,7 @@
psmouse->poll = alps_poll;
psmouse->disconnect = alps_disconnect;
psmouse->reconnect = alps_reconnect;
- psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6;
+ psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6;
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
@@ -1690,18 +1771,16 @@
int alps_detect(struct psmouse *psmouse, bool set_properties)
{
- int version;
- const struct alps_model_info *model;
+ struct alps_data dummy;
- model = alps_get_model(psmouse, &version);
- if (!model)
+ if (alps_identify(psmouse, &dummy) < 0)
return -1;
if (set_properties) {
psmouse->vendor = "ALPS";
- psmouse->name = model->flags & ALPS_DUALPOINT ?
+ psmouse->name = dummy.flags & ALPS_DUALPOINT ?
"DualPoint TouchPad" : "GlidePoint";
- psmouse->model = version;
+ psmouse->model = dummy.proto_version << 8;
}
return 0;
}
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index ae1ac35..9704805 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -12,35 +12,146 @@
#ifndef _ALPS_H
#define _ALPS_H
-#define ALPS_PROTO_V1 0
-#define ALPS_PROTO_V2 1
-#define ALPS_PROTO_V3 2
-#define ALPS_PROTO_V4 3
+#define ALPS_PROTO_V1 1
+#define ALPS_PROTO_V2 2
+#define ALPS_PROTO_V3 3
+#define ALPS_PROTO_V4 4
+/**
+ * struct alps_model_info - touchpad ID table
+ * @signature: E7 response string to match.
+ * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response
+ * (aka command mode response) identifies the firmware minor version. This
+ * can be used to distinguish different hardware models which are not
+ * uniquely identifiable through their E7 responses.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ * known format for this model. The first byte of the report, ANDed with
+ * mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ *
+ * Many (but not all) ALPS touchpads can be identified by looking at the
+ * values returned in the "E7 report" and/or the "EC report." This table
+ * lists a number of such touchpads.
+ */
struct alps_model_info {
- unsigned char signature[3];
- unsigned char command_mode_resp; /* v3/v4 only */
+ unsigned char signature[3];
+ unsigned char command_mode_resp;
unsigned char proto_version;
- unsigned char byte0, mask0;
- unsigned char flags;
+ unsigned char byte0, mask0;
+ unsigned char flags;
};
+/**
+ * struct alps_nibble_commands - encodings for register accesses
+ * @command: PS/2 command used for the nibble
+ * @data: Data supplied as an argument to the PS/2 command, if applicable
+ *
+ * The ALPS protocol uses magic sequences to transmit binary data to the
+ * touchpad, as it is generally not OK to send arbitrary bytes out the
+ * PS/2 port. Each of the sequences in this table sends one nibble of the
+ * register address or (write) data. Different versions of the ALPS protocol
+ * use slightly different encodings.
+ */
struct alps_nibble_commands {
int command;
unsigned char data;
};
+/**
+ * struct alps_fields - decoded version of the report packet
+ * @x_map: Bitmap of active X positions for MT.
+ * @y_map: Bitmap of active Y positions for MT.
+ * @fingers: Number of fingers for MT.
+ * @x: X position for ST.
+ * @y: Y position for ST.
+ * @z: Z position for ST.
+ * @first_mp: Packet is the first of a multi-packet report.
+ * @is_mp: Packet is part of a multi-packet report.
+ * @left: Left touchpad button is active.
+ * @right: Right touchpad button is active.
+ * @middle: Middle touchpad button is active.
+ * @ts_left: Left trackstick button is active.
+ * @ts_right: Right trackstick button is active.
+ * @ts_middle: Middle trackstick button is active.
+ */
+struct alps_fields {
+ unsigned int x_map;
+ unsigned int y_map;
+ unsigned int fingers;
+ unsigned int x;
+ unsigned int y;
+ unsigned int z;
+ unsigned int first_mp:1;
+ unsigned int is_mp:1;
+
+ unsigned int left:1;
+ unsigned int right:1;
+ unsigned int middle:1;
+
+ unsigned int ts_left:1;
+ unsigned int ts_right:1;
+ unsigned int ts_middle:1;
+};
+
+/**
+ * struct alps_data - private data structure for the ALPS driver
+ * @dev2: "Relative" device used to report trackstick or mouse activity.
+ * @phys: Physical path for the relative device.
+ * @nibble_commands: Command mapping used for touchpad register accesses.
+ * @addr_command: Command used to tell the touchpad that a register address
+ * follows.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ * known format for this model. The first byte of the report, ANDed with
+ * mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
+ * @hw_init: Protocol-specific hardware init function.
+ * @process_packet: Protocol-specific function to process a report packet.
+ * @decode_fields: Protocol-specific function to read packet bitfields.
+ * @set_abs_params: Protocol-specific function to configure the input_dev.
+ * @prev_fin: Finger bit from previous packet.
+ * @multi_packet: Multi-packet data in progress.
+ * @multi_data: Saved multi-packet data.
+ * @x1: First X coordinate from last MT report.
+ * @x2: Second X coordinate from last MT report.
+ * @y1: First Y coordinate from last MT report.
+ * @y2: Second Y coordinate from last MT report.
+ * @fingers: Number of fingers from last MT report.
+ * @quirks: Bitmap of ALPS_QUIRK_*.
+ * @timer: Timer for flushing out the final report packet in the stream.
+ */
struct alps_data {
- struct input_dev *dev2; /* Relative device */
- char phys[32]; /* Phys */
- const struct alps_model_info *i;/* Info */
+ struct input_dev *dev2;
+ char phys[32];
+
+ /* these are autodetected when the device is identified */
const struct alps_nibble_commands *nibble_commands;
- int addr_command; /* Command to set register address */
- int prev_fin; /* Finger bit from previous packet */
- int multi_packet; /* Multi-packet data in progress */
- unsigned char multi_data[6]; /* Saved multi-packet data */
- int x1, x2, y1, y2; /* Coordinates from last MT report */
- int fingers; /* Number of fingers from MT report */
+ int addr_command;
+ unsigned char proto_version;
+ unsigned char byte0, mask0;
+ unsigned char flags;
+ int x_max;
+ int y_max;
+ int x_bits;
+ int y_bits;
+
+ int (*hw_init)(struct psmouse *psmouse);
+ void (*process_packet)(struct psmouse *psmouse);
+ void (*decode_fields)(struct alps_fields *f, unsigned char *p);
+ void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
+
+ int prev_fin;
+ int multi_packet;
+ unsigned char multi_data[6];
+ int x1, x2, y1, y2;
+ int fingers;
u8 quirks;
struct timer_list timer;
};
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
new file mode 100644
index 0000000..b409c3d
--- /dev/null
+++ b/drivers/input/mouse/cyapa.c
@@ -0,0 +1,973 @@
+/*
+ * Cypress APA trackpad with I2C interface
+ *
+ * Author: Dudley Du <dudl@cypress.com>
+ * Further cleanup and restructuring by:
+ * Daniel Kurtz <djkurtz@chromium.org>
+ * Benson Leung <bleung@chromium.org>
+ *
+ * Copyright (C) 2011-2012 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011-2012 Google, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/* APA trackpad firmware generation */
+#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */
+
+#define CYAPA_NAME "Cypress APA Trackpad (cyapa)"
+
+/* commands for read/write registers of Cypress trackpad */
+#define CYAPA_CMD_SOFT_RESET 0x00
+#define CYAPA_CMD_POWER_MODE 0x01
+#define CYAPA_CMD_DEV_STATUS 0x02
+#define CYAPA_CMD_GROUP_DATA 0x03
+#define CYAPA_CMD_GROUP_CMD 0x04
+#define CYAPA_CMD_GROUP_QUERY 0x05
+#define CYAPA_CMD_BL_STATUS 0x06
+#define CYAPA_CMD_BL_HEAD 0x07
+#define CYAPA_CMD_BL_CMD 0x08
+#define CYAPA_CMD_BL_DATA 0x09
+#define CYAPA_CMD_BL_ALL 0x0a
+#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b
+#define CYAPA_CMD_BLK_HEAD 0x0c
+
+/* report data start reg offset address. */
+#define DATA_REG_START_OFFSET 0x0000
+
+#define BL_HEAD_OFFSET 0x00
+#define BL_DATA_OFFSET 0x10
+
+/*
+ * Operational Device Status Register
+ *
+ * bit 7: Valid interrupt source
+ * bit 6 - 4: Reserved
+ * bit 3 - 2: Power status
+ * bit 1 - 0: Device status
+ */
+#define REG_OP_STATUS 0x00
+#define OP_STATUS_SRC 0x80
+#define OP_STATUS_POWER 0x0c
+#define OP_STATUS_DEV 0x03
+#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV)
+
+/*
+ * Operational Finger Count/Button Flags Register
+ *
+ * bit 7 - 4: Number of touched finger
+ * bit 3: Valid data
+ * bit 2: Middle Physical Button
+ * bit 1: Right Physical Button
+ * bit 0: Left physical Button
+ */
+#define REG_OP_DATA1 0x01
+#define OP_DATA_VALID 0x08
+#define OP_DATA_MIDDLE_BTN 0x04
+#define OP_DATA_RIGHT_BTN 0x02
+#define OP_DATA_LEFT_BTN 0x01
+#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \
+ OP_DATA_LEFT_BTN)
+
+/*
+ * Bootloader Status Register
+ *
+ * bit 7: Busy
+ * bit 6 - 5: Reserved
+ * bit 4: Bootloader running
+ * bit 3 - 1: Reserved
+ * bit 0: Checksum valid
+ */
+#define REG_BL_STATUS 0x01
+#define BL_STATUS_BUSY 0x80
+#define BL_STATUS_RUNNING 0x10
+#define BL_STATUS_DATA_VALID 0x08
+#define BL_STATUS_CSUM_VALID 0x01
+
+/*
+ * Bootloader Error Register
+ *
+ * bit 7: Invalid
+ * bit 6: Invalid security key
+ * bit 5: Bootloading
+ * bit 4: Command checksum
+ * bit 3: Flash protection error
+ * bit 2: Flash checksum error
+ * bit 1 - 0: Reserved
+ */
+#define REG_BL_ERROR 0x02
+#define BL_ERROR_INVALID 0x80
+#define BL_ERROR_INVALID_KEY 0x40
+#define BL_ERROR_BOOTLOADING 0x20
+#define BL_ERROR_CMD_CSUM 0x10
+#define BL_ERROR_FLASH_PROT 0x08
+#define BL_ERROR_FLASH_CSUM 0x04
+
+#define BL_STATUS_SIZE 3 /* length of bootloader status registers */
+#define BLK_HEAD_BYTES 32
+
+#define PRODUCT_ID_SIZE 16
+#define QUERY_DATA_SIZE 27
+#define REG_PROTOCOL_GEN_QUERY_OFFSET 20
+
+#define REG_OFFSET_DATA_BASE 0x0000
+#define REG_OFFSET_COMMAND_BASE 0x0028
+#define REG_OFFSET_QUERY_BASE 0x002a
+
+#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3)
+#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4)
+#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5)
+#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \
+ CAPABILITY_RIGHT_BTN_MASK | \
+ CAPABILITY_MIDDLE_BTN_MASK)
+
+#define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE
+
+#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1)
+
+#define PWR_MODE_MASK 0xfc
+#define PWR_MODE_FULL_ACTIVE (0x3f << 2)
+#define PWR_MODE_IDLE (0x05 << 2) /* default sleep time is 50 ms. */
+#define PWR_MODE_OFF (0x00 << 2)
+
+#define PWR_STATUS_MASK 0x0c
+#define PWR_STATUS_ACTIVE (0x03 << 2)
+#define PWR_STATUS_IDLE (0x02 << 2)
+#define PWR_STATUS_OFF (0x00 << 2)
+
+/*
+ * CYAPA trackpad device states.
+ * Used in register 0x00, bit1-0, DeviceStatus field.
+ * Other values indicate device is in an abnormal state and must be reset.
+ */
+#define CYAPA_DEV_NORMAL 0x03
+#define CYAPA_DEV_BUSY 0x01
+
+enum cyapa_state {
+ CYAPA_STATE_OP,
+ CYAPA_STATE_BL_IDLE,
+ CYAPA_STATE_BL_ACTIVE,
+ CYAPA_STATE_BL_BUSY,
+ CYAPA_STATE_NO_DEVICE,
+};
+
+
+struct cyapa_touch {
+ /*
+ * high bits or x/y position value
+ * bit 7 - 4: high 4 bits of x position value
+ * bit 3 - 0: high 4 bits of y position value
+ */
+ u8 xy_hi;
+ u8 x_lo; /* low 8 bits of x position value. */
+ u8 y_lo; /* low 8 bits of y position value. */
+ u8 pressure;
+ /* id range is 1 - 15. It is incremented with every new touch. */
+ u8 id;
+} __packed;
+
+/* The touch.id is used as the MT slot id, thus max MT slot is 15 */
+#define CYAPA_MAX_MT_SLOTS 15
+
+struct cyapa_reg_data {
+ /*
+ * bit 0 - 1: device status
+ * bit 3 - 2: power mode
+ * bit 6 - 4: reserved
+ * bit 7: interrupt valid bit
+ */
+ u8 device_status;
+ /*
+ * bit 7 - 4: number of fingers currently touching pad
+ * bit 3: valid data check bit
+ * bit 2: middle mechanism button state if exists
+ * bit 1: right mechanism button state if exists
+ * bit 0: left mechanism button state if exists
+ */
+ u8 finger_btn;
+ /* CYAPA reports up to 5 touches per packet. */
+ struct cyapa_touch touches[5];
+} __packed;
+
+/* The main device structure */
+struct cyapa {
+ enum cyapa_state state;
+
+ struct i2c_client *client;
+ struct input_dev *input;
+ char phys[32]; /* device physical location */
+ int irq;
+ bool irq_wake; /* irq wake is enabled */
+ bool smbus;
+
+ /* read from query data region. */
+ char product_id[16];
+ u8 btn_capability;
+ u8 gen;
+ int max_abs_x;
+ int max_abs_y;
+ int physical_size_x;
+ int physical_size_y;
+};
+
+static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03,
+ 0x04, 0x05, 0x06, 0x07 };
+static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04,
+ 0x05, 0x06, 0x07 };
+
+struct cyapa_cmd_len {
+ u8 cmd;
+ u8 len;
+};
+
+#define CYAPA_ADAPTER_FUNC_NONE 0
+#define CYAPA_ADAPTER_FUNC_I2C 1
+#define CYAPA_ADAPTER_FUNC_SMBUS 2
+#define CYAPA_ADAPTER_FUNC_BOTH 3
+
+/*
+ * macros for SMBus communication
+ */
+#define SMBUS_READ 0x01
+#define SMBUS_WRITE 0x00
+#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
+#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
+#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
+#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
+
+ /* for byte read/write command */
+#define CMD_RESET 0
+#define CMD_POWER_MODE 1
+#define CMD_DEV_STATUS 2
+#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
+#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET)
+#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE)
+#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS)
+
+ /* for group registers read/write command */
+#define REG_GROUP_DATA 0
+#define REG_GROUP_CMD 2
+#define REG_GROUP_QUERY 3
+#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
+#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA)
+#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD)
+#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY)
+
+ /* for register block read/write command */
+#define CMD_BL_STATUS 0
+#define CMD_BL_HEAD 1
+#define CMD_BL_CMD 2
+#define CMD_BL_DATA 3
+#define CMD_BL_ALL 4
+#define CMD_BLK_PRODUCT_ID 5
+#define CMD_BLK_HEAD 6
+#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
+
+/* register block read/write command in bootloader mode */
+#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS)
+#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD)
+#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD)
+#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA)
+#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL)
+
+/* register block read/write command in operational mode */
+#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
+#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
+
+static const struct cyapa_cmd_len cyapa_i2c_cmds[] = {
+ { CYAPA_OFFSET_SOFT_RESET, 1 },
+ { REG_OFFSET_COMMAND_BASE + 1, 1 },
+ { REG_OFFSET_DATA_BASE, 1 },
+ { REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) },
+ { REG_OFFSET_COMMAND_BASE, 0 },
+ { REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE },
+ { BL_HEAD_OFFSET, 3 },
+ { BL_HEAD_OFFSET, 16 },
+ { BL_HEAD_OFFSET, 16 },
+ { BL_DATA_OFFSET, 16 },
+ { BL_HEAD_OFFSET, 32 },
+ { REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE },
+ { REG_OFFSET_DATA_BASE, 32 }
+};
+
+static const struct cyapa_cmd_len cyapa_smbus_cmds[] = {
+ { CYAPA_SMBUS_RESET, 1 },
+ { CYAPA_SMBUS_POWER_MODE, 1 },
+ { CYAPA_SMBUS_DEV_STATUS, 1 },
+ { CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) },
+ { CYAPA_SMBUS_GROUP_CMD, 2 },
+ { CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE },
+ { CYAPA_SMBUS_BL_STATUS, 3 },
+ { CYAPA_SMBUS_BL_HEAD, 16 },
+ { CYAPA_SMBUS_BL_CMD, 16 },
+ { CYAPA_SMBUS_BL_DATA, 16 },
+ { CYAPA_SMBUS_BL_ALL, 32 },
+ { CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE },
+ { CYAPA_SMBUS_BLK_HEAD, 16 },
+};
+
+static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
+ u8 *values)
+{
+ return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values);
+}
+
+static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg,
+ size_t len, const u8 *values)
+{
+ return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values);
+}
+
+/*
+ * cyapa_smbus_read_block - perform smbus block read command
+ * @cyapa - private data structure of the driver
+ * @cmd - the properly encoded smbus command
+ * @len - expected length of smbus command result
+ * @values - buffer to store smbus command result
+ *
+ * Returns negative errno, else the number of bytes written.
+ *
+ * Note:
+ * In trackpad device, the memory block allocated for I2C register map
+ * is 256 bytes, so the max read block for I2C bus is 256 bytes.
+ */
+static ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
+ u8 *values)
+{
+ ssize_t ret;
+ u8 index;
+ u8 smbus_cmd;
+ u8 *buf;
+ struct i2c_client *client = cyapa->client;
+
+ if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd))
+ return -EINVAL;
+
+ if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) {
+ /* read specific block registers command. */
+ smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+ ret = i2c_smbus_read_block_data(client, smbus_cmd, values);
+ goto out;
+ }
+
+ ret = 0;
+ for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) {
+ smbus_cmd = SMBUS_ENCODE_IDX(cmd, index);
+ smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ);
+ buf = values + I2C_SMBUS_BLOCK_MAX * index;
+ ret = i2c_smbus_read_block_data(client, smbus_cmd, buf);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ return ret > 0 ? len : ret;
+}
+
+static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx)
+{
+ u8 cmd;
+
+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ }
+ return i2c_smbus_read_byte_data(cyapa->client, cmd);
+}
+
+static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value)
+{
+ u8 cmd;
+
+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ }
+ return i2c_smbus_write_byte_data(cyapa->client, cmd, value);
+}
+
+static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
+{
+ u8 cmd;
+ size_t len;
+
+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ len = cyapa_smbus_cmds[cmd_idx].len;
+ return cyapa_smbus_read_block(cyapa, cmd, len, values);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ len = cyapa_i2c_cmds[cmd_idx].len;
+ return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
+ }
+}
+
+/*
+ * Query device for its current operating state.
+ *
+ */
+static int cyapa_get_state(struct cyapa *cyapa)
+{
+ int ret;
+ u8 status[BL_STATUS_SIZE];
+
+ cyapa->state = CYAPA_STATE_NO_DEVICE;
+
+ /*
+ * Get trackpad status by reading 3 registers starting from 0.
+ * If the device is in the bootloader, this will be BL_HEAD.
+ * If the device is in operation mode, this will be the DATA regs.
+ *
+ */
+ ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
+ status);
+
+ /*
+ * On smbus systems in OP mode, the i2c_reg_read will fail with
+ * -ETIMEDOUT. In this case, try again using the smbus equivalent
+ * command. This should return a BL_HEAD indicating CYAPA_STATE_OP.
+ */
+ if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO))
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
+
+ if (ret != BL_STATUS_SIZE)
+ goto error;
+
+ if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) {
+ switch (status[REG_OP_STATUS] & OP_STATUS_DEV) {
+ case CYAPA_DEV_NORMAL:
+ case CYAPA_DEV_BUSY:
+ cyapa->state = CYAPA_STATE_OP;
+ break;
+ default:
+ ret = -EAGAIN;
+ goto error;
+ }
+ } else {
+ if (status[REG_BL_STATUS] & BL_STATUS_BUSY)
+ cyapa->state = CYAPA_STATE_BL_BUSY;
+ else if (status[REG_BL_ERROR] & BL_ERROR_BOOTLOADING)
+ cyapa->state = CYAPA_STATE_BL_ACTIVE;
+ else
+ cyapa->state = CYAPA_STATE_BL_IDLE;
+ }
+
+ return 0;
+error:
+ return (ret < 0) ? ret : -EAGAIN;
+}
+
+/*
+ * Poll device for its status in a loop, waiting up to timeout for a response.
+ *
+ * When the device switches state, it usually takes ~300 ms.
+ * However, when running a new firmware image, the device must calibrate its
+ * sensors, which can take as long as 2 seconds.
+ *
+ * Note: The timeout has granularity of the polling rate, which is 100 ms.
+ *
+ * Returns:
+ * 0 when the device eventually responds with a valid non-busy state.
+ * -ETIMEDOUT if device never responds (too many -EAGAIN)
+ * < 0 other errors
+ */
+static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout)
+{
+ int ret;
+ int tries = timeout / 100;
+
+ ret = cyapa_get_state(cyapa);
+ while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
+ msleep(100);
+ ret = cyapa_get_state(cyapa);
+ }
+ return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret;
+}
+
+static int cyapa_bl_deactivate(struct cyapa *cyapa)
+{
+ int ret;
+
+ ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
+ bl_deactivate);
+ if (ret < 0)
+ return ret;
+
+ /* wait for bootloader to switch to idle state; should take < 100ms */
+ msleep(100);
+ ret = cyapa_poll_state(cyapa, 500);
+ if (ret < 0)
+ return ret;
+ if (cyapa->state != CYAPA_STATE_BL_IDLE)
+ return -EAGAIN;
+ return 0;
+}
+
+/*
+ * Exit bootloader
+ *
+ * Send bl_exit command, then wait 50 - 100 ms to let device transition to
+ * operational mode. If this is the first time the device's firmware is
+ * running, it can take up to 2 seconds to calibrate its sensors. So, poll
+ * the device's new state for up to 2 seconds.
+ *
+ * Returns:
+ * -EIO failure while reading from device
+ * -EAGAIN device is stuck in bootloader, b/c it has invalid firmware
+ * 0 device is supported and in operational mode
+ */
+static int cyapa_bl_exit(struct cyapa *cyapa)
+{
+ int ret;
+
+ ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Wait for bootloader to exit, and operation mode to start.
+ * Normally, this takes at least 50 ms.
+ */
+ usleep_range(50000, 100000);
+ /*
+ * In addition, when a device boots for the first time after being
+ * updated to new firmware, it must first calibrate its sensors, which
+ * can take up to an additional 2 seconds.
+ */
+ ret = cyapa_poll_state(cyapa, 2000);
+ if (ret < 0)
+ return ret;
+ if (cyapa->state != CYAPA_STATE_OP)
+ return -EAGAIN;
+
+ return 0;
+}
+
+/*
+ * Set device power mode
+ *
+ */
+static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode)
+{
+ struct device *dev = &cyapa->client->dev;
+ int ret;
+ u8 power;
+
+ if (cyapa->state != CYAPA_STATE_OP)
+ return 0;
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE);
+ if (ret < 0)
+ return ret;
+
+ power = ret & ~PWR_MODE_MASK;
+ power |= power_mode & PWR_MODE_MASK;
+ ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power);
+ if (ret < 0)
+ dev_err(dev, "failed to set power_mode 0x%02x err = %d\n",
+ power_mode, ret);
+ return ret;
+}
+
+static int cyapa_get_query_data(struct cyapa *cyapa)
+{
+ u8 query_data[QUERY_DATA_SIZE];
+ int ret;
+
+ if (cyapa->state != CYAPA_STATE_OP)
+ return -EBUSY;
+
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data);
+ if (ret < 0)
+ return ret;
+ if (ret != QUERY_DATA_SIZE)
+ return -EIO;
+
+ memcpy(&cyapa->product_id[0], &query_data[0], 5);
+ cyapa->product_id[5] = '-';
+ memcpy(&cyapa->product_id[6], &query_data[5], 6);
+ cyapa->product_id[12] = '-';
+ memcpy(&cyapa->product_id[13], &query_data[11], 2);
+ cyapa->product_id[15] = '\0';
+
+ cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK;
+
+ cyapa->gen = query_data[20] & 0x0f;
+
+ cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22];
+ cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23];
+
+ cyapa->physical_size_x =
+ ((query_data[24] & 0xf0) << 4) | query_data[25];
+ cyapa->physical_size_y =
+ ((query_data[24] & 0x0f) << 8) | query_data[26];
+
+ return 0;
+}
+
+/*
+ * Check if device is operational.
+ *
+ * An operational device is responding, has exited bootloader, and has
+ * firmware supported by this driver.
+ *
+ * Returns:
+ * -EBUSY no device or in bootloader
+ * -EIO failure while reading from device
+ * -EAGAIN device is still in bootloader
+ * if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware
+ * -EINVAL device is in operational mode, but not supported by this driver
+ * 0 device is supported
+ */
+static int cyapa_check_is_operational(struct cyapa *cyapa)
+{
+ struct device *dev = &cyapa->client->dev;
+ static const char unique_str[] = "CYTRA";
+ int ret;
+
+ ret = cyapa_poll_state(cyapa, 2000);
+ if (ret < 0)
+ return ret;
+ switch (cyapa->state) {
+ case CYAPA_STATE_BL_ACTIVE:
+ ret = cyapa_bl_deactivate(cyapa);
+ if (ret)
+ return ret;
+
+ /* Fallthrough state */
+ case CYAPA_STATE_BL_IDLE:
+ ret = cyapa_bl_exit(cyapa);
+ if (ret)
+ return ret;
+
+ /* Fallthrough state */
+ case CYAPA_STATE_OP:
+ ret = cyapa_get_query_data(cyapa);
+ if (ret < 0)
+ return ret;
+
+ /* only support firmware protocol gen3 */
+ if (cyapa->gen != CYAPA_GEN3) {
+ dev_err(dev, "unsupported protocol version (%d)",
+ cyapa->gen);
+ return -EINVAL;
+ }
+
+ /* only support product ID starting with CYTRA */
+ if (memcmp(cyapa->product_id, unique_str,
+ sizeof(unique_str) - 1) != 0) {
+ dev_err(dev, "unsupported product ID (%s)\n",
+ cyapa->product_id);
+ return -EINVAL;
+ }
+ return 0;
+
+ default:
+ return -EIO;
+ }
+ return 0;
+}
+
+static irqreturn_t cyapa_irq(int irq, void *dev_id)
+{
+ struct cyapa *cyapa = dev_id;
+ struct device *dev = &cyapa->client->dev;
+ struct input_dev *input = cyapa->input;
+ struct cyapa_reg_data data;
+ int i;
+ int ret;
+ int num_fingers;
+
+ if (device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
+
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
+ if (ret != sizeof(data))
+ goto out;
+
+ if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
+ (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
+ (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) {
+ goto out;
+ }
+
+ num_fingers = (data.finger_btn >> 4) & 0x0f;
+ for (i = 0; i < num_fingers; i++) {
+ const struct cyapa_touch *touch = &data.touches[i];
+ /* Note: touch->id range is 1 to 15; slots are 0 to 14. */
+ int slot = touch->id - 1;
+
+ input_mt_slot(input, slot);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ input_report_abs(input, ABS_MT_POSITION_X,
+ ((touch->xy_hi & 0xf0) << 4) | touch->x_lo);
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ ((touch->xy_hi & 0x0f) << 8) | touch->y_lo);
+ input_report_abs(input, ABS_MT_PRESSURE, touch->pressure);
+ }
+
+ input_mt_sync_frame(input);
+
+ if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
+ input_report_key(input, BTN_LEFT,
+ data.finger_btn & OP_DATA_LEFT_BTN);
+
+ if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
+ input_report_key(input, BTN_MIDDLE,
+ data.finger_btn & OP_DATA_MIDDLE_BTN);
+
+ if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
+ input_report_key(input, BTN_RIGHT,
+ data.finger_btn & OP_DATA_RIGHT_BTN);
+
+ input_sync(input);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static u8 cyapa_check_adapter_functionality(struct i2c_client *client)
+{
+ u8 ret = CYAPA_ADAPTER_FUNC_NONE;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ ret |= CYAPA_ADAPTER_FUNC_I2C;
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ ret |= CYAPA_ADAPTER_FUNC_SMBUS;
+ return ret;
+}
+
+static int cyapa_create_input_dev(struct cyapa *cyapa)
+{
+ struct device *dev = &cyapa->client->dev;
+ int ret;
+ struct input_dev *input;
+
+ if (!cyapa->physical_size_x || !cyapa->physical_size_y)
+ return -EINVAL;
+
+ input = cyapa->input = input_allocate_device();
+ if (!input) {
+ dev_err(dev, "allocate memory for input device failed\n");
+ return -ENOMEM;
+ }
+
+ input->name = CYAPA_NAME;
+ input->phys = cyapa->phys;
+ input->id.bustype = BUS_I2C;
+ input->id.version = 1;
+ input->id.product = 0; /* means any product in eventcomm. */
+ input->dev.parent = &cyapa->client->dev;
+
+ input_set_drvdata(input, cyapa);
+
+ __set_bit(EV_ABS, input->evbit);
+
+ /* finger position */
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0,
+ 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0,
+ 0);
+ input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ input_abs_set_res(input, ABS_MT_POSITION_X,
+ cyapa->max_abs_x / cyapa->physical_size_x);
+ input_abs_set_res(input, ABS_MT_POSITION_Y,
+ cyapa->max_abs_y / cyapa->physical_size_y);
+
+ if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
+ __set_bit(BTN_LEFT, input->keybit);
+ if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
+ __set_bit(BTN_MIDDLE, input->keybit);
+ if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
+ __set_bit(BTN_RIGHT, input->keybit);
+
+ if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK)
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+ /* handle pointer emulation and unused slots in core */
+ ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
+ INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
+ if (ret) {
+ dev_err(dev, "allocate memory for MT slots failed, %d\n", ret);
+ goto err_free_device;
+ }
+
+ /* Register the device in input subsystem */
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(dev, "input device register failed, %d\n", ret);
+ goto err_free_device;
+ }
+ return 0;
+
+err_free_device:
+ input_free_device(input);
+ cyapa->input = NULL;
+ return ret;
+}
+
+static int cyapa_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ int ret;
+ u8 adapter_func;
+ struct cyapa *cyapa;
+ struct device *dev = &client->dev;
+
+ adapter_func = cyapa_check_adapter_functionality(client);
+ if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) {
+ dev_err(dev, "not a supported I2C/SMBus adapter\n");
+ return -EIO;
+ }
+
+ cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
+ if (!cyapa) {
+ dev_err(dev, "allocate memory for cyapa failed\n");
+ return -ENOMEM;
+ }
+
+ cyapa->gen = CYAPA_GEN3;
+ cyapa->client = client;
+ i2c_set_clientdata(client, cyapa);
+ sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr,
+ client->addr);
+
+ /* i2c isn't supported, use smbus */
+ if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS)
+ cyapa->smbus = true;
+ cyapa->state = CYAPA_STATE_NO_DEVICE;
+ ret = cyapa_check_is_operational(cyapa);
+ if (ret) {
+ dev_err(dev, "device not operational, %d\n", ret);
+ goto err_mem_free;
+ }
+
+ ret = cyapa_create_input_dev(cyapa);
+ if (ret) {
+ dev_err(dev, "create input_dev instance failed, %d\n", ret);
+ goto err_mem_free;
+ }
+
+ ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+ if (ret) {
+ dev_err(dev, "set active power failed, %d\n", ret);
+ goto err_unregister_device;
+ }
+
+ cyapa->irq = client->irq;
+ ret = request_threaded_irq(cyapa->irq,
+ NULL,
+ cyapa_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "cyapa",
+ cyapa);
+ if (ret) {
+ dev_err(dev, "IRQ request failed: %d\n, ", ret);
+ goto err_unregister_device;
+ }
+
+ return 0;
+
+err_unregister_device:
+ input_unregister_device(cyapa->input);
+err_mem_free:
+ kfree(cyapa);
+
+ return ret;
+}
+
+static int cyapa_remove(struct i2c_client *client)
+{
+ struct cyapa *cyapa = i2c_get_clientdata(client);
+
+ free_irq(cyapa->irq, cyapa);
+ input_unregister_device(cyapa->input);
+ cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
+ kfree(cyapa);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cyapa_suspend(struct device *dev)
+{
+ int ret;
+ u8 power_mode;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ disable_irq(cyapa->irq);
+
+ /*
+ * Set trackpad device to idle mode if wakeup is allowed,
+ * otherwise turn off.
+ */
+ power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE
+ : PWR_MODE_OFF;
+ ret = cyapa_set_power_mode(cyapa, power_mode);
+ if (ret < 0)
+ dev_err(dev, "set power mode failed, %d\n", ret);
+
+ if (device_may_wakeup(dev))
+ cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0);
+ return 0;
+}
+
+static int cyapa_resume(struct device *dev)
+{
+ int ret;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev) && cyapa->irq_wake)
+ disable_irq_wake(cyapa->irq);
+
+ ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+ if (ret)
+ dev_warn(dev, "resume active power failed, %d\n", ret);
+
+ enable_irq(cyapa->irq);
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume);
+
+static const struct i2c_device_id cyapa_id_table[] = {
+ { "cyapa", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, cyapa_id_table);
+
+static struct i2c_driver cyapa_driver = {
+ .driver = {
+ .name = "cyapa",
+ .owner = THIS_MODULE,
+ .pm = &cyapa_pm_ops,
+ },
+
+ .probe = cyapa_probe,
+ .remove = cyapa_remove,
+ .id_table = cyapa_id_table,
+};
+
+module_i2c_driver(cyapa_driver);
+
+MODULE_DESCRIPTION("Cypress APA I2C Trackpad Driver");
+MODULE_AUTHOR("Dudley Du <dudl@cypress.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
new file mode 100644
index 0000000..1673dc6
--- /dev/null
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -0,0 +1,725 @@
+/*
+ * Cypress Trackpad PS/2 mouse driver
+ *
+ * Copyright (c) 2012 Cypress Semiconductor Corporation.
+ *
+ * Author:
+ * Dudley Du <dudl@cypress.com>
+ *
+ * Additional contributors include:
+ * Kamal Mostafa <kamal@canonical.com>
+ * Kyle Fazzari <git@status.e4ward.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "cypress_ps2.h"
+
+#undef CYTP_DEBUG_VERBOSE /* define this and DEBUG for more verbose dump */
+
+static void cypress_set_packet_size(struct psmouse *psmouse, unsigned int n)
+{
+ struct cytp_data *cytp = psmouse->private;
+ cytp->pkt_size = n;
+}
+
+static const unsigned char cytp_rate[] = {10, 20, 40, 60, 100, 200};
+static const unsigned char cytp_resolution[] = {0x00, 0x01, 0x02, 0x03};
+
+static int cypress_ps2_sendbyte(struct psmouse *psmouse, int value)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ if (ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT) < 0) {
+ psmouse_dbg(psmouse,
+ "sending command 0x%02x failed, resp 0x%02x\n",
+ value & 0xff, ps2dev->nak);
+ if (ps2dev->nak == CYTP_PS2_RETRY)
+ return CYTP_PS2_RETRY;
+ else
+ return CYTP_PS2_ERROR;
+ }
+
+#ifdef CYTP_DEBUG_VERBOSE
+ psmouse_dbg(psmouse, "sending command 0x%02x succeeded, resp 0xfa\n",
+ value & 0xff);
+#endif
+
+ return 0;
+}
+
+static int cypress_ps2_ext_cmd(struct psmouse *psmouse, unsigned short cmd,
+ unsigned char data)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int tries = CYTP_PS2_CMD_TRIES;
+ int rc;
+
+ ps2_begin_command(ps2dev);
+
+ do {
+ /*
+ * Send extension command byte (0xE8 or 0xF3).
+ * If sending the command fails, send recovery command
+ * to make the device return to the ready state.
+ */
+ rc = cypress_ps2_sendbyte(psmouse, cmd & 0xff);
+ if (rc == CYTP_PS2_RETRY) {
+ rc = cypress_ps2_sendbyte(psmouse, 0x00);
+ if (rc == CYTP_PS2_RETRY)
+ rc = cypress_ps2_sendbyte(psmouse, 0x0a);
+ }
+ if (rc == CYTP_PS2_ERROR)
+ continue;
+
+ rc = cypress_ps2_sendbyte(psmouse, data);
+ if (rc == CYTP_PS2_RETRY)
+ rc = cypress_ps2_sendbyte(psmouse, data);
+ if (rc == CYTP_PS2_ERROR)
+ continue;
+ else
+ break;
+ } while (--tries > 0);
+
+ ps2_end_command(ps2dev);
+
+ return rc;
+}
+
+static int cypress_ps2_read_cmd_status(struct psmouse *psmouse,
+ unsigned char cmd,
+ unsigned char *param)
+{
+ int rc;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ enum psmouse_state old_state;
+ int pktsize;
+
+ ps2_begin_command(&psmouse->ps2dev);
+
+ old_state = psmouse->state;
+ psmouse->state = PSMOUSE_CMD_MODE;
+ psmouse->pktcnt = 0;
+
+ pktsize = (cmd == CYTP_CMD_READ_TP_METRICS) ? 8 : 3;
+ memset(param, 0, pktsize);
+
+ rc = cypress_ps2_sendbyte(psmouse, 0xe9);
+ if (rc < 0)
+ goto out;
+
+ wait_event_timeout(ps2dev->wait,
+ (psmouse->pktcnt >= pktsize),
+ msecs_to_jiffies(CYTP_CMD_TIMEOUT));
+
+ memcpy(param, psmouse->packet, pktsize);
+
+ psmouse_dbg(psmouse, "Command 0x%02x response data (0x): %*ph\n",
+ cmd, pktsize, param);
+
+out:
+ psmouse->state = old_state;
+ psmouse->pktcnt = 0;
+
+ ps2_end_command(&psmouse->ps2dev);
+
+ return rc;
+}
+
+static bool cypress_verify_cmd_state(struct psmouse *psmouse,
+ unsigned char cmd, unsigned char *param)
+{
+ bool rate_match = false;
+ bool resolution_match = false;
+ int i;
+
+ /* callers will do further checking. */
+ if (cmd == CYTP_CMD_READ_CYPRESS_ID ||
+ cmd == CYTP_CMD_STANDARD_MODE ||
+ cmd == CYTP_CMD_READ_TP_METRICS)
+ return true;
+
+ if ((~param[0] & DFLT_RESP_BITS_VALID) == DFLT_RESP_BITS_VALID &&
+ (param[0] & DFLT_RESP_BIT_MODE) == DFLT_RESP_STREAM_MODE) {
+ for (i = 0; i < sizeof(cytp_resolution); i++)
+ if (cytp_resolution[i] == param[1])
+ resolution_match = true;
+
+ for (i = 0; i < sizeof(cytp_rate); i++)
+ if (cytp_rate[i] == param[2])
+ rate_match = true;
+
+ if (resolution_match && rate_match)
+ return true;
+ }
+
+ psmouse_dbg(psmouse, "verify cmd state failed.\n");
+ return false;
+}
+
+static int cypress_send_ext_cmd(struct psmouse *psmouse, unsigned char cmd,
+ unsigned char *param)
+{
+ int tries = CYTP_PS2_CMD_TRIES;
+ int rc;
+
+ psmouse_dbg(psmouse, "send extension cmd 0x%02x, [%d %d %d %d]\n",
+ cmd, DECODE_CMD_AA(cmd), DECODE_CMD_BB(cmd),
+ DECODE_CMD_CC(cmd), DECODE_CMD_DD(cmd));
+
+ do {
+ cypress_ps2_ext_cmd(psmouse,
+ PSMOUSE_CMD_SETRES, DECODE_CMD_DD(cmd));
+ cypress_ps2_ext_cmd(psmouse,
+ PSMOUSE_CMD_SETRES, DECODE_CMD_CC(cmd));
+ cypress_ps2_ext_cmd(psmouse,
+ PSMOUSE_CMD_SETRES, DECODE_CMD_BB(cmd));
+ cypress_ps2_ext_cmd(psmouse,
+ PSMOUSE_CMD_SETRES, DECODE_CMD_AA(cmd));
+
+ rc = cypress_ps2_read_cmd_status(psmouse, cmd, param);
+ if (rc)
+ continue;
+
+ if (cypress_verify_cmd_state(psmouse, cmd, param))
+ return 0;
+
+ } while (--tries > 0);
+
+ return -EIO;
+}
+
+int cypress_detect(struct psmouse *psmouse, bool set_properties)
+{
+ unsigned char param[3];
+
+ if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param))
+ return -ENODEV;
+
+ /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */
+ if (param[0] != 0x33 || param[1] != 0xCC)
+ return -ENODEV;
+
+ if (set_properties) {
+ psmouse->vendor = "Cypress";
+ psmouse->name = "Trackpad";
+ }
+
+ return 0;
+}
+
+static int cypress_read_fw_version(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+ unsigned char param[3];
+
+ if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param))
+ return -ENODEV;
+
+ /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */
+ if (param[0] != 0x33 || param[1] != 0xCC)
+ return -ENODEV;
+
+ cytp->fw_version = param[2] & FW_VERSION_MASX;
+ cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
+
+ psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
+ psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
+ cytp->tp_metrics_supported);
+
+ return 0;
+}
+
+static int cypress_read_tp_metrics(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+ unsigned char param[8];
+
+ /* set default values for tp metrics. */
+ cytp->tp_width = CYTP_DEFAULT_WIDTH;
+ cytp->tp_high = CYTP_DEFAULT_HIGH;
+ cytp->tp_max_abs_x = CYTP_ABS_MAX_X;
+ cytp->tp_max_abs_y = CYTP_ABS_MAX_Y;
+ cytp->tp_min_pressure = CYTP_MIN_PRESSURE;
+ cytp->tp_max_pressure = CYTP_MAX_PRESSURE;
+ cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
+ cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+
+ memset(param, 0, sizeof(param));
+ if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
+ /* Update trackpad parameters. */
+ cytp->tp_max_abs_x = (param[1] << 8) | param[0];
+ cytp->tp_max_abs_y = (param[3] << 8) | param[2];
+ cytp->tp_min_pressure = param[4];
+ cytp->tp_max_pressure = param[5];
+ }
+
+ if (!cytp->tp_max_pressure ||
+ cytp->tp_max_pressure < cytp->tp_min_pressure ||
+ !cytp->tp_width || !cytp->tp_high ||
+ !cytp->tp_max_abs_x ||
+ cytp->tp_max_abs_x < cytp->tp_width ||
+ !cytp->tp_max_abs_y ||
+ cytp->tp_max_abs_y < cytp->tp_high)
+ return -EINVAL;
+
+ cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
+ cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+
+#ifdef CYTP_DEBUG_VERBOSE
+ psmouse_dbg(psmouse, "Dump trackpad hardware configuration as below:\n");
+ psmouse_dbg(psmouse, "cytp->tp_width = %d\n", cytp->tp_width);
+ psmouse_dbg(psmouse, "cytp->tp_high = %d\n", cytp->tp_high);
+ psmouse_dbg(psmouse, "cytp->tp_max_abs_x = %d\n", cytp->tp_max_abs_x);
+ psmouse_dbg(psmouse, "cytp->tp_max_abs_y = %d\n", cytp->tp_max_abs_y);
+ psmouse_dbg(psmouse, "cytp->tp_min_pressure = %d\n", cytp->tp_min_pressure);
+ psmouse_dbg(psmouse, "cytp->tp_max_pressure = %d\n", cytp->tp_max_pressure);
+ psmouse_dbg(psmouse, "cytp->tp_res_x = %d\n", cytp->tp_res_x);
+ psmouse_dbg(psmouse, "cytp->tp_res_y = %d\n", cytp->tp_res_y);
+
+ psmouse_dbg(psmouse, "tp_type_APA = %d\n",
+ (param[6] & TP_METRICS_BIT_APA) ? 1 : 0);
+ psmouse_dbg(psmouse, "tp_type_MTG = %d\n",
+ (param[6] & TP_METRICS_BIT_MTG) ? 1 : 0);
+ psmouse_dbg(psmouse, "tp_palm = %d\n",
+ (param[6] & TP_METRICS_BIT_PALM) ? 1 : 0);
+ psmouse_dbg(psmouse, "tp_stubborn = %d\n",
+ (param[6] & TP_METRICS_BIT_STUBBORN) ? 1 : 0);
+ psmouse_dbg(psmouse, "tp_1f_jitter = %d\n",
+ (param[6] & TP_METRICS_BIT_1F_JITTER) >> 2);
+ psmouse_dbg(psmouse, "tp_2f_jitter = %d\n",
+ (param[6] & TP_METRICS_BIT_2F_JITTER) >> 4);
+ psmouse_dbg(psmouse, "tp_1f_spike = %d\n",
+ param[7] & TP_METRICS_BIT_1F_SPIKE);
+ psmouse_dbg(psmouse, "tp_2f_spike = %d\n",
+ (param[7] & TP_METRICS_BIT_2F_SPIKE) >> 2);
+ psmouse_dbg(psmouse, "tp_abs_packet_format_set = %d\n",
+ (param[7] & TP_METRICS_BIT_ABS_PKT_FORMAT_SET) >> 4);
+#endif
+
+ return 0;
+}
+
+static int cypress_query_hardware(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+ int ret;
+
+ ret = cypress_read_fw_version(psmouse);
+ if (ret)
+ return ret;
+
+ if (cytp->tp_metrics_supported) {
+ ret = cypress_read_tp_metrics(psmouse);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cypress_set_absolute_mode(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+ unsigned char param[3];
+
+ if (cypress_send_ext_cmd(psmouse, CYTP_CMD_ABS_WITH_PRESSURE_MODE, param) < 0)
+ return -1;
+
+ cytp->mode = (cytp->mode & ~CYTP_BIT_ABS_REL_MASK)
+ | CYTP_BIT_ABS_PRESSURE;
+ cypress_set_packet_size(psmouse, 5);
+
+ return 0;
+}
+
+/*
+ * Reset trackpad device.
+ * This is also the default mode when trackpad powered on.
+ */
+static void cypress_reset(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+
+ cytp->mode = 0;
+
+ psmouse_reset(psmouse);
+}
+
+static int cypress_set_input_params(struct input_dev *input,
+ struct cytp_data *cytp)
+{
+ int ret;
+
+ if (!cytp->tp_res_x || !cytp->tp_res_y)
+ return -EINVAL;
+
+ __set_bit(EV_ABS, input->evbit);
+ input_set_abs_params(input, ABS_X, 0, cytp->tp_max_abs_x, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, cytp->tp_max_abs_y, 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE,
+ cytp->tp_min_pressure, cytp->tp_max_pressure, 0, 0);
+ input_set_abs_params(input, ABS_TOOL_WIDTH, 0, 255, 0, 0);
+
+ /* finger position */
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, cytp->tp_max_abs_x, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cytp->tp_max_abs_y, 0, 0);
+ input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ ret = input_mt_init_slots(input, CYTP_MAX_MT_SLOTS,
+ INPUT_MT_DROP_UNUSED|INPUT_MT_TRACK);
+ if (ret < 0)
+ return ret;
+
+ __set_bit(INPUT_PROP_SEMI_MT, input->propbit);
+
+ input_abs_set_res(input, ABS_X, cytp->tp_res_x);
+ input_abs_set_res(input, ABS_Y, cytp->tp_res_y);
+
+ input_abs_set_res(input, ABS_MT_POSITION_X, cytp->tp_res_x);
+ input_abs_set_res(input, ABS_MT_POSITION_Y, cytp->tp_res_y);
+
+ __set_bit(BTN_TOUCH, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input->keybit);
+ __set_bit(BTN_TOOL_QUINTTAP, input->keybit);
+
+ __clear_bit(EV_REL, input->evbit);
+ __clear_bit(REL_X, input->relbit);
+ __clear_bit(REL_Y, input->relbit);
+
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ __set_bit(BTN_MIDDLE, input->keybit);
+
+ input_set_drvdata(input, cytp);
+
+ return 0;
+}
+
+static int cypress_get_finger_count(unsigned char header_byte)
+{
+ unsigned char bits6_7;
+ int finger_count;
+
+ bits6_7 = header_byte >> 6;
+ finger_count = bits6_7 & 0x03;
+
+ if (finger_count == 1)
+ return 1;
+
+ if (header_byte & ABS_HSCROLL_BIT) {
+ /* HSCROLL gets added on to 0 finger count. */
+ switch (finger_count) {
+ case 0: return 4;
+ case 2: return 5;
+ default:
+ /* Invalid contact (e.g. palm). Ignore it. */
+ return -1;
+ }
+ }
+
+ return finger_count;
+}
+
+
+static int cypress_parse_packet(struct psmouse *psmouse,
+ struct cytp_data *cytp, struct cytp_report_data *report_data)
+{
+ unsigned char *packet = psmouse->packet;
+ unsigned char header_byte = packet[0];
+ int contact_cnt;
+
+ memset(report_data, 0, sizeof(struct cytp_report_data));
+
+ contact_cnt = cypress_get_finger_count(header_byte);
+
+ if (contact_cnt < 0) /* e.g. palm detect */
+ return -EINVAL;
+
+ report_data->contact_cnt = contact_cnt;
+
+ report_data->tap = (header_byte & ABS_MULTIFINGER_TAP) ? 1 : 0;
+
+ if (report_data->contact_cnt == 1) {
+ report_data->contacts[0].x =
+ ((packet[1] & 0x70) << 4) | packet[2];
+ report_data->contacts[0].y =
+ ((packet[1] & 0x07) << 8) | packet[3];
+ if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+ report_data->contacts[0].z = packet[4];
+
+ } else if (report_data->contact_cnt >= 2) {
+ report_data->contacts[0].x =
+ ((packet[1] & 0x70) << 4) | packet[2];
+ report_data->contacts[0].y =
+ ((packet[1] & 0x07) << 8) | packet[3];
+ if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+ report_data->contacts[0].z = packet[4];
+
+ report_data->contacts[1].x =
+ ((packet[5] & 0xf0) << 4) | packet[6];
+ report_data->contacts[1].y =
+ ((packet[5] & 0x0f) << 8) | packet[7];
+ if (cytp->mode & CYTP_BIT_ABS_PRESSURE)
+ report_data->contacts[1].z = report_data->contacts[0].z;
+ }
+
+ report_data->left = (header_byte & BTN_LEFT_BIT) ? 1 : 0;
+ report_data->right = (header_byte & BTN_RIGHT_BIT) ? 1 : 0;
+
+ /*
+ * This is only true if one of the mouse buttons were tapped. Make
+ * sure it doesn't turn into a click. The regular tap-to-click
+ * functionality will handle that on its own. If we don't do this,
+ * disabling tap-to-click won't affect the mouse button zones.
+ */
+ if (report_data->tap)
+ report_data->left = 0;
+
+#ifdef CYTP_DEBUG_VERBOSE
+ {
+ int i;
+ int n = report_data->contact_cnt;
+ psmouse_dbg(psmouse, "Dump parsed report data as below:\n");
+ psmouse_dbg(psmouse, "contact_cnt = %d\n",
+ report_data->contact_cnt);
+ if (n > CYTP_MAX_MT_SLOTS)
+ n = CYTP_MAX_MT_SLOTS;
+ for (i = 0; i < n; i++)
+ psmouse_dbg(psmouse, "contacts[%d] = {%d, %d, %d}\n", i,
+ report_data->contacts[i].x,
+ report_data->contacts[i].y,
+ report_data->contacts[i].z);
+ psmouse_dbg(psmouse, "left = %d\n", report_data->left);
+ psmouse_dbg(psmouse, "right = %d\n", report_data->right);
+ psmouse_dbg(psmouse, "middle = %d\n", report_data->middle);
+ }
+#endif
+
+ return 0;
+}
+
+static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
+{
+ int i;
+ struct input_dev *input = psmouse->dev;
+ struct cytp_data *cytp = psmouse->private;
+ struct cytp_report_data report_data;
+ struct cytp_contact *contact;
+ struct input_mt_pos pos[CYTP_MAX_MT_SLOTS];
+ int slots[CYTP_MAX_MT_SLOTS];
+ int n;
+
+ if (cypress_parse_packet(psmouse, cytp, &report_data))
+ return;
+
+ n = report_data.contact_cnt;
+
+ if (n > CYTP_MAX_MT_SLOTS)
+ n = CYTP_MAX_MT_SLOTS;
+
+ for (i = 0; i < n; i++) {
+ contact = &report_data.contacts[i];
+ pos[i].x = contact->x;
+ pos[i].y = contact->y;
+ }
+
+ input_mt_assign_slots(input, slots, pos, n);
+
+ for (i = 0; i < n; i++) {
+ contact = &report_data.contacts[i];
+ input_mt_slot(input, slots[i]);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ input_report_abs(input, ABS_MT_POSITION_X, contact->x);
+ input_report_abs(input, ABS_MT_POSITION_Y, contact->y);
+ input_report_abs(input, ABS_MT_PRESSURE, contact->z);
+ }
+
+ input_mt_sync_frame(input);
+
+ input_mt_report_finger_count(input, report_data.contact_cnt);
+
+ input_report_key(input, BTN_LEFT, report_data.left);
+ input_report_key(input, BTN_RIGHT, report_data.right);
+ input_report_key(input, BTN_MIDDLE, report_data.middle);
+
+ input_sync(input);
+}
+
+static psmouse_ret_t cypress_validate_byte(struct psmouse *psmouse)
+{
+ int contact_cnt;
+ int index = psmouse->pktcnt - 1;
+ unsigned char *packet = psmouse->packet;
+ struct cytp_data *cytp = psmouse->private;
+
+ if (index < 0 || index > cytp->pkt_size)
+ return PSMOUSE_BAD_DATA;
+
+ if (index == 0 && (packet[0] & 0xfc) == 0) {
+ /* call packet process for reporting finger leave. */
+ cypress_process_packet(psmouse, 1);
+ return PSMOUSE_FULL_PACKET;
+ }
+
+ /*
+ * Perform validation (and adjust packet size) based only on the
+ * first byte; allow all further bytes through.
+ */
+ if (index != 0)
+ return PSMOUSE_GOOD_DATA;
+
+ /*
+ * If absolute/relative mode bit has not been set yet, just pass
+ * the byte through.
+ */
+ if ((cytp->mode & CYTP_BIT_ABS_REL_MASK) == 0)
+ return PSMOUSE_GOOD_DATA;
+
+ if ((packet[0] & 0x08) == 0x08)
+ return PSMOUSE_BAD_DATA;
+
+ contact_cnt = cypress_get_finger_count(packet[0]);
+
+ if (contact_cnt < 0)
+ return PSMOUSE_BAD_DATA;
+
+ if (cytp->mode & CYTP_BIT_ABS_NO_PRESSURE)
+ cypress_set_packet_size(psmouse, contact_cnt == 2 ? 7 : 4);
+ else
+ cypress_set_packet_size(psmouse, contact_cnt == 2 ? 8 : 5);
+
+ return PSMOUSE_GOOD_DATA;
+}
+
+static psmouse_ret_t cypress_protocol_handler(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp = psmouse->private;
+
+ if (psmouse->pktcnt >= cytp->pkt_size) {
+ cypress_process_packet(psmouse, 0);
+ return PSMOUSE_FULL_PACKET;
+ }
+
+ return cypress_validate_byte(psmouse);
+}
+
+static void cypress_set_rate(struct psmouse *psmouse, unsigned int rate)
+{
+ struct cytp_data *cytp = psmouse->private;
+
+ if (rate >= 80) {
+ psmouse->rate = 80;
+ cytp->mode |= CYTP_BIT_HIGH_RATE;
+ } else {
+ psmouse->rate = 40;
+ cytp->mode &= ~CYTP_BIT_HIGH_RATE;
+ }
+
+ ps2_command(&psmouse->ps2dev, (unsigned char *)&psmouse->rate,
+ PSMOUSE_CMD_SETRATE);
+}
+
+static void cypress_disconnect(struct psmouse *psmouse)
+{
+ cypress_reset(psmouse);
+ kfree(psmouse->private);
+ psmouse->private = NULL;
+}
+
+static int cypress_reconnect(struct psmouse *psmouse)
+{
+ int tries = CYTP_PS2_CMD_TRIES;
+ int rc;
+
+ do {
+ cypress_reset(psmouse);
+ rc = cypress_detect(psmouse, false);
+ } while (rc && (--tries > 0));
+
+ if (rc) {
+ psmouse_err(psmouse, "Reconnect: unable to detect trackpad.\n");
+ return -1;
+ }
+
+ if (cypress_set_absolute_mode(psmouse)) {
+ psmouse_err(psmouse, "Reconnect: Unable to initialize Cypress absolute mode.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int cypress_init(struct psmouse *psmouse)
+{
+ struct cytp_data *cytp;
+
+ cytp = (struct cytp_data *)kzalloc(sizeof(struct cytp_data), GFP_KERNEL);
+ psmouse->private = (void *)cytp;
+ if (cytp == NULL)
+ return -ENOMEM;
+
+ cypress_reset(psmouse);
+
+ psmouse->pktsize = 8;
+
+ if (cypress_query_hardware(psmouse)) {
+ psmouse_err(psmouse, "Unable to query Trackpad hardware.\n");
+ goto err_exit;
+ }
+
+ if (cypress_set_absolute_mode(psmouse)) {
+ psmouse_err(psmouse, "init: Unable to initialize Cypress absolute mode.\n");
+ goto err_exit;
+ }
+
+ if (cypress_set_input_params(psmouse->dev, cytp) < 0) {
+ psmouse_err(psmouse, "init: Unable to set input params.\n");
+ goto err_exit;
+ }
+
+ psmouse->model = 1;
+ psmouse->protocol_handler = cypress_protocol_handler;
+ psmouse->set_rate = cypress_set_rate;
+ psmouse->disconnect = cypress_disconnect;
+ psmouse->reconnect = cypress_reconnect;
+ psmouse->cleanup = cypress_reset;
+ psmouse->resync_time = 0;
+
+ return 0;
+
+err_exit:
+ /*
+ * Reset Cypress Trackpad as a standard mouse. Then
+ * let psmouse driver commmunicating with it as default PS2 mouse.
+ */
+ cypress_reset(psmouse);
+
+ psmouse->private = NULL;
+ kfree(cytp);
+
+ return -1;
+}
+
+bool cypress_supported(void)
+{
+ return true;
+}
diff --git a/drivers/input/mouse/cypress_ps2.h b/drivers/input/mouse/cypress_ps2.h
new file mode 100644
index 0000000..4720f21
--- /dev/null
+++ b/drivers/input/mouse/cypress_ps2.h
@@ -0,0 +1,191 @@
+#ifndef _CYPRESS_PS2_H
+#define _CYPRESS_PS2_H
+
+#include "psmouse.h"
+
+#define CMD_BITS_MASK 0x03
+#define COMPOSIT(x, s) (((x) & CMD_BITS_MASK) << (s))
+
+#define ENCODE_CMD(aa, bb, cc, dd) \
+ (COMPOSIT((aa), 6) | COMPOSIT((bb), 4) | COMPOSIT((cc), 2) | COMPOSIT((dd), 0))
+#define CYTP_CMD_ABS_NO_PRESSURE_MODE ENCODE_CMD(0, 1, 0, 0)
+#define CYTP_CMD_ABS_WITH_PRESSURE_MODE ENCODE_CMD(0, 1, 0, 1)
+#define CYTP_CMD_SMBUS_MODE ENCODE_CMD(0, 1, 1, 0)
+#define CYTP_CMD_STANDARD_MODE ENCODE_CMD(0, 2, 0, 0) /* not implemented yet. */
+#define CYTP_CMD_CYPRESS_REL_MODE ENCODE_CMD(1, 1, 1, 1) /* not implemented yet. */
+#define CYTP_CMD_READ_CYPRESS_ID ENCODE_CMD(0, 0, 0, 0)
+#define CYTP_CMD_READ_TP_METRICS ENCODE_CMD(0, 0, 0, 1)
+#define CYTP_CMD_SET_HSCROLL_WIDTH(w) ENCODE_CMD(1, 1, 0, (w))
+#define CYTP_CMD_SET_HSCROLL_MASK ENCODE_CMD(1, 1, 0, 0)
+#define CYTP_CMD_SET_VSCROLL_WIDTH(w) ENCODE_CMD(1, 2, 0, (w))
+#define CYTP_CMD_SET_VSCROLL_MASK ENCODE_CMD(1, 2, 0, 0)
+#define CYTP_CMD_SET_PALM_GEOMETRY(e) ENCODE_CMD(1, 2, 1, (e))
+#define CYTP_CMD_PALM_GEMMETRY_MASK ENCODE_CMD(1, 2, 1, 0)
+#define CYTP_CMD_SET_PALM_SENSITIVITY(s) ENCODE_CMD(1, 2, 2, (s))
+#define CYTP_CMD_PALM_SENSITIVITY_MASK ENCODE_CMD(1, 2, 2, 0)
+#define CYTP_CMD_SET_MOUSE_SENSITIVITY(s) ENCODE_CMD(1, 3, ((s) >> 2), (s))
+#define CYTP_CMD_MOUSE_SENSITIVITY_MASK ENCODE_CMD(1, 3, 0, 0)
+#define CYTP_CMD_REQUEST_BASELINE_STATUS ENCODE_CMD(2, 0, 0, 1)
+#define CYTP_CMD_REQUEST_RECALIBRATION ENCODE_CMD(2, 0, 0, 3)
+
+#define DECODE_CMD_AA(x) (((x) >> 6) & CMD_BITS_MASK)
+#define DECODE_CMD_BB(x) (((x) >> 4) & CMD_BITS_MASK)
+#define DECODE_CMD_CC(x) (((x) >> 2) & CMD_BITS_MASK)
+#define DECODE_CMD_DD(x) ((x) & CMD_BITS_MASK)
+
+/* Cypress trackpad working mode. */
+#define CYTP_BIT_ABS_PRESSURE (1 << 3)
+#define CYTP_BIT_ABS_NO_PRESSURE (1 << 2)
+#define CYTP_BIT_CYPRESS_REL (1 << 1)
+#define CYTP_BIT_STANDARD_REL (1 << 0)
+#define CYTP_BIT_REL_MASK (CYTP_BIT_CYPRESS_REL | CYTP_BIT_STANDARD_REL)
+#define CYTP_BIT_ABS_MASK (CYTP_BIT_ABS_PRESSURE | CYTP_BIT_ABS_NO_PRESSURE)
+#define CYTP_BIT_ABS_REL_MASK (CYTP_BIT_ABS_MASK | CYTP_BIT_REL_MASK)
+
+#define CYTP_BIT_HIGH_RATE (1 << 4)
+/*
+ * report mode bit is set, firmware working in Remote Mode.
+ * report mode bit is cleared, firmware working in Stream Mode.
+ */
+#define CYTP_BIT_REPORT_MODE (1 << 5)
+
+/* scrolling width values for set HSCROLL and VSCROLL width command. */
+#define SCROLL_WIDTH_NARROW 1
+#define SCROLL_WIDTH_NORMAL 2
+#define SCROLL_WIDTH_WIDE 3
+
+#define PALM_GEOMETRY_ENABLE 1
+#define PALM_GEOMETRY_DISABLE 0
+
+#define TP_METRICS_MASK 0x80
+#define FW_VERSION_MASX 0x7f
+#define FW_VER_HIGH_MASK 0x70
+#define FW_VER_LOW_MASK 0x0f
+
+/* Times to retry a ps2_command and millisecond delay between tries. */
+#define CYTP_PS2_CMD_TRIES 3
+#define CYTP_PS2_CMD_DELAY 500
+
+/* time out for PS/2 command only in milliseconds. */
+#define CYTP_CMD_TIMEOUT 200
+#define CYTP_DATA_TIMEOUT 30
+
+#define CYTP_EXT_CMD 0xe8
+#define CYTP_PS2_RETRY 0xfe
+#define CYTP_PS2_ERROR 0xfc
+
+#define CYTP_RESP_RETRY 0x01
+#define CYTP_RESP_ERROR 0xfe
+
+
+#define CYTP_105001_WIDTH 97 /* Dell XPS 13 */
+#define CYTP_105001_HIGH 59
+#define CYTP_DEFAULT_WIDTH (CYTP_105001_WIDTH)
+#define CYTP_DEFAULT_HIGH (CYTP_105001_HIGH)
+
+#define CYTP_ABS_MAX_X 1600
+#define CYTP_ABS_MAX_Y 900
+#define CYTP_MAX_PRESSURE 255
+#define CYTP_MIN_PRESSURE 0
+
+/* header byte bits of relative package. */
+#define BTN_LEFT_BIT 0x01
+#define BTN_RIGHT_BIT 0x02
+#define BTN_MIDDLE_BIT 0x04
+#define REL_X_SIGN_BIT 0x10
+#define REL_Y_SIGN_BIT 0x20
+
+/* header byte bits of absolute package. */
+#define ABS_VSCROLL_BIT 0x10
+#define ABS_HSCROLL_BIT 0x20
+#define ABS_MULTIFINGER_TAP 0x04
+#define ABS_EDGE_MOTION_MASK 0x80
+
+#define DFLT_RESP_BITS_VALID 0x88 /* SMBus bit should not be set. */
+#define DFLT_RESP_SMBUS_BIT 0x80
+#define DFLT_SMBUS_MODE 0x80
+#define DFLT_PS2_MODE 0x00
+#define DFLT_RESP_BIT_MODE 0x40
+#define DFLT_RESP_REMOTE_MODE 0x40
+#define DFLT_RESP_STREAM_MODE 0x00
+#define DFLT_RESP_BIT_REPORTING 0x20
+#define DFLT_RESP_BIT_SCALING 0x10
+
+#define TP_METRICS_BIT_PALM 0x80
+#define TP_METRICS_BIT_STUBBORN 0x40
+#define TP_METRICS_BIT_2F_JITTER 0x30
+#define TP_METRICS_BIT_1F_JITTER 0x0c
+#define TP_METRICS_BIT_APA 0x02
+#define TP_METRICS_BIT_MTG 0x01
+#define TP_METRICS_BIT_ABS_PKT_FORMAT_SET 0xf0
+#define TP_METRICS_BIT_2F_SPIKE 0x0c
+#define TP_METRICS_BIT_1F_SPIKE 0x03
+
+/* bits of first byte response of E9h-Status Request command. */
+#define RESP_BTN_RIGHT_BIT 0x01
+#define RESP_BTN_MIDDLE_BIT 0x02
+#define RESP_BTN_LEFT_BIT 0x04
+#define RESP_SCALING_BIT 0x10
+#define RESP_ENABLE_BIT 0x20
+#define RESP_REMOTE_BIT 0x40
+#define RESP_SMBUS_BIT 0x80
+
+#define CYTP_MAX_MT_SLOTS 2
+
+struct cytp_contact {
+ int x;
+ int y;
+ int z; /* also named as touch pressure. */
+};
+
+/* The structure of Cypress Trackpad event data. */
+struct cytp_report_data {
+ int contact_cnt;
+ struct cytp_contact contacts[CYTP_MAX_MT_SLOTS];
+ unsigned int left:1;
+ unsigned int right:1;
+ unsigned int middle:1;
+ unsigned int tap:1; /* multi-finger tap detected. */
+};
+
+/* The structure of Cypress Trackpad device private data. */
+struct cytp_data {
+ int fw_version;
+
+ int pkt_size;
+ int mode;
+
+ int tp_min_pressure;
+ int tp_max_pressure;
+ int tp_width; /* X direction physical size in mm. */
+ int tp_high; /* Y direction physical size in mm. */
+ int tp_max_abs_x; /* Max X absolute units that can be reported. */
+ int tp_max_abs_y; /* Max Y absolute units that can be reported. */
+
+ int tp_res_x; /* X resolution in units/mm. */
+ int tp_res_y; /* Y resolution in units/mm. */
+
+ int tp_metrics_supported;
+};
+
+
+#ifdef CONFIG_MOUSE_PS2_CYPRESS
+int cypress_detect(struct psmouse *psmouse, bool set_properties);
+int cypress_init(struct psmouse *psmouse);
+bool cypress_supported(void);
+#else
+inline int cypress_detect(struct psmouse *psmouse, bool set_properties)
+{
+ return -ENOSYS;
+}
+inline int cypress_init(struct psmouse *psmouse)
+{
+ return -ENOSYS;
+}
+inline bool cypress_supported(void)
+{
+ return 0;
+}
+#endif /* CONFIG_MOUSE_PS2_CYPRESS */
+
+#endif /* _CYPRESS_PS2_H */
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 22fe254..cff065f 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -34,6 +34,7 @@
#include "touchkit_ps2.h"
#include "elantech.h"
#include "sentelic.h"
+#include "cypress_ps2.h"
#define DRIVER_DESC "PS/2 mouse driver"
@@ -759,6 +760,28 @@
}
/*
+ * Try Cypress Trackpad.
+ * Must try it before Finger Sensing Pad because Finger Sensing Pad probe
+ * upsets some modules of Cypress Trackpads.
+ */
+ if (max_proto > PSMOUSE_IMEX &&
+ cypress_detect(psmouse, set_properties) == 0) {
+ if (cypress_supported()) {
+ if (cypress_init(psmouse) == 0)
+ return PSMOUSE_CYPRESS;
+
+ /*
+ * Finger Sensing Pad probe upsets some modules of
+ * Cypress Trackpad, must avoid Finger Sensing Pad
+ * probe if Cypress Trackpad device detected.
+ */
+ return PSMOUSE_PS2;
+ }
+
+ max_proto = PSMOUSE_IMEX;
+ }
+
+/*
* Try ALPS TouchPad
*/
if (max_proto > PSMOUSE_IMEX) {
@@ -896,6 +919,15 @@
.alias = "thinkps",
.detect = thinking_detect,
},
+#ifdef CONFIG_MOUSE_PS2_CYPRESS
+ {
+ .type = PSMOUSE_CYPRESS,
+ .name = "CyPS/2",
+ .alias = "cypress",
+ .detect = cypress_detect,
+ .init = cypress_init,
+ },
+#endif
{
.type = PSMOUSE_GENPS,
.name = "GenPS/2",
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index fe1df23..2f0b39d 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -95,6 +95,7 @@
PSMOUSE_ELANTECH,
PSMOUSE_FSP,
PSMOUSE_SYNAPTICS_RELATIVE,
+ PSMOUSE_CYPRESS,
PSMOUSE_AUTO /* This one should always be last */
};
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 12d12ca..2f78538 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -722,11 +722,13 @@
default:
/*
* If the finger slot contained in SGM is valid, and either
- * hasn't changed, or is new, then report SGM in MTB slot 0.
+ * hasn't changed, or is new, or the old SGM has now moved to
+ * AGM, then report SGM in MTB slot 0.
* Otherwise, empty MTB slot 0.
*/
if (mt_state->sgm != -1 &&
- (mt_state->sgm == old->sgm || old->sgm == -1))
+ (mt_state->sgm == old->sgm ||
+ old->sgm == -1 || mt_state->agm == old->sgm))
synaptics_report_slot(dev, 0, sgm);
else
synaptics_report_slot(dev, 0, NULL);
@@ -735,9 +737,31 @@
* If the finger slot contained in AGM is valid, and either
* hasn't changed, or is new, then report AGM in MTB slot 1.
* Otherwise, empty MTB slot 1.
+ *
+ * However, in the case where the AGM is new, make sure that
+ * that it is either the same as the old SGM, or there was no
+ * SGM.
+ *
+ * Otherwise, if the SGM was just 1, and the new AGM is 2, then
+ * the new AGM will keep the old SGM's tracking ID, which can
+ * cause apparent drumroll. This happens if in the following
+ * valid finger sequence:
+ *
+ * Action SGM AGM (MTB slot:Contact)
+ * 1. Touch contact 0 (0:0)
+ * 2. Touch contact 1 (0:0, 1:1)
+ * 3. Lift contact 0 (1:1)
+ * 4. Touch contacts 2,3 (0:2, 1:3)
+ *
+ * In step 4, contact 3, in AGM must not be given the same
+ * tracking ID as contact 1 had in step 3. To avoid this,
+ * the first agm with contact 3 is dropped and slot 1 is
+ * invalidated (tracking ID = -1).
*/
if (mt_state->agm != -1 &&
- (mt_state->agm == old->agm || old->agm == -1))
+ (mt_state->agm == old->agm ||
+ (old->agm == -1 &&
+ (old->sgm == -1 || mt_state->agm == old->sgm))))
synaptics_report_slot(dev, 1, agm);
else
synaptics_report_slot(dev, 1, NULL);
@@ -1247,11 +1271,11 @@
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
- input_mt_init_slots(dev, 2, 0);
set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
ABS_MT_POSITION_Y);
/* Image sensors can report per-contact pressure */
input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+ input_mt_init_slots(dev, 2, INPUT_MT_POINTER);
/* Image sensors can signal 4 and 5 finger clicks */
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 4a4e182..560c243 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -236,6 +236,7 @@
config SERIO_ARC_PS2
tristate "ARC PS/2 support"
+ depends on GENERIC_HARDIRQS
help
Say Y here if you have an ARC FPGA platform with a PS/2
controller in it.
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index f92d34f..aaf23ae 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -553,10 +553,10 @@
if (!rep_data)
return error;
- rep_data[0] = report_id;
- rep_data[1] = mode;
-
do {
+ rep_data[0] = report_id;
+ rep_data[1] = mode;
+
error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, length, 1);
if (error >= 0)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 264138f..41b6fbf 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -359,6 +359,7 @@
case 0x802: /* Intuos4 General Pen */
case 0x804: /* Intuos4 Marker Pen */
case 0x40802: /* Intuos4 Classic Pen */
+ case 0x18803: /* DTH2242 Grip Pen */
case 0x022:
wacom->tool[idx] = BTN_TOOL_PEN;
break;
@@ -538,6 +539,13 @@
input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
+ } else if (features->type == DTK) {
+ input_report_key(input, BTN_0, (data[6] & 0x01));
+ input_report_key(input, BTN_1, (data[6] & 0x02));
+ input_report_key(input, BTN_2, (data[6] & 0x04));
+ input_report_key(input, BTN_3, (data[6] & 0x08));
+ input_report_key(input, BTN_4, (data[6] & 0x10));
+ input_report_key(input, BTN_5, (data[6] & 0x20));
} else if (features->type == WACOM_24HD) {
input_report_key(input, BTN_0, (data[6] & 0x01));
input_report_key(input, BTN_1, (data[6] & 0x02));
@@ -785,25 +793,6 @@
return 1;
}
-static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
-{
- int touch_max = wacom->features.touch_max;
- int i;
-
- if (!wacom->slots)
- return -1;
-
- for (i = 0; i < touch_max; ++i) {
- if (wacom->slots[i] == contactid)
- return i;
- }
- for (i = 0; i < touch_max; ++i) {
- if (wacom->slots[i] == -1)
- return i;
- }
- return -1;
-}
-
static int int_dist(int x1, int y1, int x2, int y2)
{
int x = x2 - x1;
@@ -833,8 +822,7 @@
for (i = 0; i < contacts_to_send; i++) {
int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
- int id = data[offset + 1];
- int slot = find_slot_from_contactid(wacom, id);
+ int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
if (slot < 0)
continue;
@@ -856,9 +844,7 @@
input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
input_report_abs(input, ABS_MT_ORIENTATION, w > h);
}
- wacom->slots[slot] = touch ? id : -1;
}
-
input_mt_report_pointer_emulation(input, true);
wacom->num_contacts_left -= contacts_to_send;
@@ -895,7 +881,7 @@
int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
bool touch = data[offset] & 0x1;
int id = le16_to_cpup((__le16 *)&data[offset + 1]);
- int slot = find_slot_from_contactid(wacom, id);
+ int slot = input_mt_get_slot_by_key(input, id);
if (slot < 0)
continue;
@@ -908,9 +894,7 @@
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
- wacom->slots[slot] = touch ? id : -1;
}
-
input_mt_report_pointer_emulation(input, true);
wacom->num_contacts_left -= contacts_to_send;
@@ -942,12 +926,11 @@
contact_with_no_pen_down_count++;
}
}
+ input_mt_report_pointer_emulation(input, true);
/* keep touch state for pen event */
wacom->shared->touch_down = (contact_with_no_pen_down_count > 0);
- input_mt_report_pointer_emulation(input, true);
-
return 1;
}
@@ -1104,12 +1087,15 @@
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
{
struct input_dev *input = wacom->input;
- int slot_id = data[0] - 2; /* data[0] is between 2 and 17 */
bool touch = data[1] & 0x80;
+ int slot = input_mt_get_slot_by_key(input, data[0]);
+
+ if (slot < 0)
+ return;
touch = touch && !wacom->shared->stylus_in_proximity;
- input_mt_slot(input, slot_id);
+ input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
@@ -1162,7 +1148,6 @@
wacom_bpt3_button_msg(wacom, data + offset);
}
-
input_mt_report_pointer_emulation(input, true);
input_sync(input);
@@ -1319,6 +1304,7 @@
case WACOM_21UX2:
case WACOM_22HD:
case WACOM_24HD:
+ case DTK:
sync = wacom_intuos_irq(wacom_wac);
break;
@@ -1444,6 +1430,51 @@
return (logical_max * 100) / physical_max;
}
+static void wacom_abs_set_axis(struct input_dev *input_dev,
+ struct wacom_wac *wacom_wac)
+{
+ struct wacom_features *features = &wacom_wac->features;
+
+ if (features->device_type == BTN_TOOL_PEN) {
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
+ features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
+ features->y_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0,
+ features->pressure_max, features->pressure_fuzz, 0);
+
+ /* penabled devices have fixed resolution for each model */
+ input_abs_set_res(input_dev, ABS_X, features->x_resolution);
+ input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
+ } else {
+ if (features->touch_max <= 2) {
+ input_set_abs_params(input_dev, ABS_X, 0,
+ features->x_max, features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ features->y_max, features->y_fuzz, 0);
+ input_abs_set_res(input_dev, ABS_X,
+ wacom_calculate_touch_res(features->x_max,
+ features->x_phy));
+ input_abs_set_res(input_dev, ABS_Y,
+ wacom_calculate_touch_res(features->y_max,
+ features->y_phy));
+ }
+
+ if (features->touch_max > 1) {
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+ features->x_max, features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+ features->y_max, features->y_fuzz, 0);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+ wacom_calculate_touch_res(features->x_max,
+ features->x_phy));
+ input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+ wacom_calculate_touch_res(features->y_max,
+ features->y_phy));
+ }
+ }
+}
+
int wacom_setup_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
@@ -1453,30 +1484,10 @@
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input_dev->keybit);
-
- input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
- features->x_fuzz, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
- features->y_fuzz, 0);
-
- if (features->device_type == BTN_TOOL_PEN) {
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
- features->pressure_fuzz, 0);
-
- /* penabled devices have fixed resolution for each model */
- input_abs_set_res(input_dev, ABS_X, features->x_resolution);
- input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
- } else {
- input_abs_set_res(input_dev, ABS_X,
- wacom_calculate_touch_res(features->x_max,
- features->x_phy));
- input_abs_set_res(input_dev, ABS_Y,
- wacom_calculate_touch_res(features->y_max,
- features->y_phy));
- }
-
__set_bit(ABS_MISC, input_dev->absbit);
+ wacom_abs_set_axis(input_dev, wacom_wac);
+
switch (wacom_wac->features.type) {
case WACOM_MO:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
@@ -1513,12 +1524,17 @@
__set_bit(BTN_Y, input_dev->keybit);
__set_bit(BTN_Z, input_dev->keybit);
- for (i = 0; i < 10; i++)
+ for (i = 6; i < 10; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
+ /* fall through */
+
+ case DTK:
+ for (i = 0; i < 6; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
@@ -1614,24 +1630,11 @@
} else if (features->device_type == BTN_TOOL_FINGER) {
__clear_bit(ABS_MISC, input_dev->absbit);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
- __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
- __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
-
- input_mt_init_slots(input_dev, features->touch_max, 0);
-
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
0, features->y_max, 0, 0);
-
- input_set_abs_params(input_dev, ABS_MT_POSITION_X,
- 0, features->x_max,
- features->x_fuzz, 0);
- input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
- 0, features->y_max,
- features->y_fuzz, 0);
+ input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
}
break;
@@ -1662,27 +1665,14 @@
case MTSCREEN:
case MTTPC:
- if (features->device_type == BTN_TOOL_FINGER) {
- wacom_wac->slots = kmalloc(features->touch_max *
- sizeof(int),
- GFP_KERNEL);
- if (!wacom_wac->slots)
- return -ENOMEM;
-
- for (i = 0; i < features->touch_max; i++)
- wacom_wac->slots[i] = -1;
- }
- /* fall through */
-
case TABLETPC2FG:
if (features->device_type == BTN_TOOL_FINGER) {
- input_mt_init_slots(input_dev, features->touch_max, 0);
- input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
- 0, MT_TOOL_MAX, 0, 0);
- input_set_abs_params(input_dev, ABS_MT_POSITION_X,
- 0, features->x_max, 0, 0);
- input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
- 0, features->y_max, 0, 0);
+ unsigned int flags = INPUT_MT_DIRECT;
+
+ if (wacom_wac->features.type == TABLETPC2FG)
+ flags = 0;
+
+ input_mt_init_slots(input_dev, features->touch_max, flags);
}
/* fall through */
@@ -1725,35 +1715,26 @@
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->device_type == BTN_TOOL_FINGER) {
+ unsigned int flags = INPUT_MT_POINTER;
+
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
- __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- input_mt_init_slots(input_dev, features->touch_max, 0);
-
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
- __set_bit(BTN_TOOL_TRIPLETAP,
- input_dev->keybit);
- __set_bit(BTN_TOOL_QUADTAP,
- input_dev->keybit);
-
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
0, features->x_max, 0, 0);
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MINOR,
0, features->y_max, 0, 0);
+ } else {
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ flags = 0;
}
-
- input_set_abs_params(input_dev, ABS_MT_POSITION_X,
- 0, features->x_max,
- features->x_fuzz, 0);
- input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
- 0, features->y_max,
- features->y_fuzz, 0);
+ input_mt_init_slots(input_dev, features->touch_max, flags);
} else if (features->device_type == BTN_TOOL_PEN) {
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
@@ -1978,6 +1959,13 @@
static const struct wacom_features wacom_features_0xF0 =
{ "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511,
0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x59 = /* Pen */
+ { "Wacom DTH2242", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
+ 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
+static const struct wacom_features wacom_features_0x5D = /* Touch */
+ { "Wacom DTH2242", .type = WACOM_24HDT,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10 };
static const struct wacom_features wacom_features_0xCC =
{ "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047,
63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -2152,6 +2140,8 @@
{ USB_DEVICE_WACOM(0x43) },
{ USB_DEVICE_WACOM(0x44) },
{ USB_DEVICE_WACOM(0x45) },
+ { USB_DEVICE_WACOM(0x59) },
+ { USB_DEVICE_WACOM(0x5D) },
{ USB_DEVICE_WACOM(0xB0) },
{ USB_DEVICE_WACOM(0xB1) },
{ USB_DEVICE_WACOM(0xB2) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 9396d77..5f9a772 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -78,6 +78,7 @@
INTUOS5L,
WACOM_21UX2,
WACOM_22HD,
+ DTK,
WACOM_24HD,
CINTIQ,
WACOM_BEE,
@@ -135,7 +136,6 @@
int pid;
int battery_capacity;
int num_contacts_left;
- int *slots;
};
#endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 515cfe7..f9a5fd8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -359,7 +359,7 @@
config TOUCHSCREEN_MMS114
tristate "MELFAS MMS114 touchscreen"
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
help
Say Y here if you have the MELFAS MMS114 touchscreen controller
chip in your system.
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
index 638e203..861b7f7 100644
--- a/drivers/input/touchscreen/cyttsp_spi.c
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -193,7 +193,6 @@
module_spi_driver(cyttsp_spi_driver);
-MODULE_ALIAS("spi:cyttsp");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 98841d8..4a29ddf 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -429,12 +429,12 @@
return -ENODEV;
}
- data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
- input_dev = input_allocate_device();
+ data = devm_kzalloc(&client->dev, sizeof(struct mms114_data),
+ GFP_KERNEL);
+ input_dev = devm_input_allocate_device(&client->dev);
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
- error = -ENOMEM;
- goto err_free_mem;
+ return -ENOMEM;
}
data->client = client;
@@ -466,57 +466,36 @@
input_set_drvdata(input_dev, data);
i2c_set_clientdata(client, data);
- data->core_reg = regulator_get(&client->dev, "avdd");
+ data->core_reg = devm_regulator_get(&client->dev, "avdd");
if (IS_ERR(data->core_reg)) {
error = PTR_ERR(data->core_reg);
dev_err(&client->dev,
"Unable to get the Core regulator (%d)\n", error);
- goto err_free_mem;
+ return error;
}
- data->io_reg = regulator_get(&client->dev, "vdd");
+ data->io_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->io_reg)) {
error = PTR_ERR(data->io_reg);
dev_err(&client->dev,
"Unable to get the IO regulator (%d)\n", error);
- goto err_core_reg;
+ return error;
}
- error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "mms114", data);
+ error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ mms114_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
- goto err_io_reg;
+ return error;
}
disable_irq(client->irq);
error = input_register_device(data->input_dev);
- if (error)
- goto err_free_irq;
-
- return 0;
-
-err_free_irq:
- free_irq(client->irq, data);
-err_io_reg:
- regulator_put(data->io_reg);
-err_core_reg:
- regulator_put(data->core_reg);
-err_free_mem:
- input_free_device(input_dev);
- kfree(data);
- return error;
-}
-
-static int mms114_remove(struct i2c_client *client)
-{
- struct mms114_data *data = i2c_get_clientdata(client);
-
- free_irq(client->irq, data);
- regulator_put(data->io_reg);
- regulator_put(data->core_reg);
- input_unregister_device(data->input_dev);
- kfree(data);
+ if (error) {
+ dev_err(&client->dev, "Failed to register input device\n");
+ return error;
+ }
return 0;
}
@@ -590,7 +569,6 @@
.of_match_table = of_match_ptr(mms114_dt_match),
},
.probe = mms114_probe,
- .remove = mms114_remove,
.id_table = mms114_id,
};
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index 84d884b..59e81b0 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -120,6 +120,7 @@
__stmpe_reset_fifo(ts->stmpe);
input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_report_key(ts->idev, BTN_TOUCH, 0);
input_sync(ts->idev);
}
@@ -153,6 +154,7 @@
input_report_abs(ts->idev, ABS_X, x);
input_report_abs(ts->idev, ABS_Y, y);
input_report_abs(ts->idev, ABS_PRESSURE, z);
+ input_report_key(ts->idev, BTN_TOUCH, 1);
input_sync(ts->idev);
/* flush the FIFO after we have read out our values. */
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 9c0cdc7..7213e8b 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -753,3 +753,4 @@
MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tsc2005");
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index f88fab5..6be2eb6 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -247,7 +247,7 @@
wm831x_ts = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ts),
GFP_KERNEL);
- input_dev = input_allocate_device();
+ input_dev = devm_input_allocate_device(&pdev->dev);
if (!wm831x_ts || !input_dev) {
error = -ENOMEM;
goto err_alloc;
@@ -376,7 +376,6 @@
err_data_irq:
free_irq(wm831x_ts->data_irq, wm831x_ts);
err_alloc:
- input_free_device(input_dev);
return error;
}
@@ -387,7 +386,6 @@
free_irq(wm831x_ts->pd_irq, wm831x_ts);
free_irq(wm831x_ts->data_irq, wm831x_ts);
- input_unregister_device(wm831x_ts->input_dev);
return 0;
}
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index c1c74e0..d33eaaf 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -4017,10 +4017,10 @@
index -= count - 1;
+ cfg->remapped = 1;
irte_info = &cfg->irq_2_iommu;
irte_info->sub_handle = devid;
irte_info->irte_index = index;
- irte_info->iommu = (void *)cfg;
goto out;
}
@@ -4127,9 +4127,9 @@
index = attr->ioapic_pin;
/* Setup IRQ remapping info */
+ cfg->remapped = 1;
irte_info->sub_handle = devid;
irte_info->irte_index = index;
- irte_info->iommu = (void *)cfg;
/* Setup IRTE for IOMMU */
irte.val = 0;
@@ -4288,9 +4288,9 @@
devid = get_device_id(&pdev->dev);
irte_info = &cfg->irq_2_iommu;
+ cfg->remapped = 1;
irte_info->sub_handle = devid;
irte_info->irte_index = index + offset;
- irte_info->iommu = (void *)cfg;
return 0;
}
@@ -4314,9 +4314,9 @@
if (index < 0)
return index;
+ cfg->remapped = 1;
irte_info->sub_handle = devid;
irte_info->irte_index = index;
- irte_info->iommu = (void *)cfg;
return 0;
}
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 86e2f4a..174bb65 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -41,6 +41,8 @@
#include <asm/irq_remapping.h>
#include <asm/iommu_table.h>
+#include "irq_remapping.h"
+
/* No locks are needed as DMA remapping hardware unit
* list is constructed at boot time and hotplug of
* these units are not supported by the architecture.
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index eca2801..43d5c8b 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -46,6 +46,8 @@
#include <asm/cacheflush.h>
#include <asm/iommu.h>
+#include "irq_remapping.h"
+
#define ROOT_SIZE VTD_PAGE_SIZE
#define CONTEXT_SIZE VTD_PAGE_SIZE
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index af8904d..f3b8f23 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -68,6 +68,7 @@
{
struct ir_table *table = iommu->ir_table;
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
u16 index, start_index;
unsigned int mask = 0;
unsigned long flags;
@@ -115,6 +116,7 @@
for (i = index; i < index + count; i++)
table->base[i].present = 1;
+ cfg->remapped = 1;
irq_iommu->iommu = iommu;
irq_iommu->irte_index = index;
irq_iommu->sub_handle = 0;
@@ -155,6 +157,7 @@
static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
unsigned long flags;
if (!irq_iommu)
@@ -162,6 +165,7 @@
raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
+ cfg->remapped = 1;
irq_iommu->iommu = iommu;
irq_iommu->irte_index = index;
irq_iommu->sub_handle = subhandle;
@@ -425,11 +429,22 @@
/* Enable interrupt-remapping */
iommu->gcmd |= DMA_GCMD_IRE;
+ iommu->gcmd &= ~DMA_GCMD_CFI; /* Block compatibility-format MSIs */
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_IRES), sts);
+ /*
+ * With CFI clear in the Global Command register, we should be
+ * protected from dangerous (i.e. compatibility) interrupts
+ * regardless of x2apic status. Check just to be sure.
+ */
+ if (sts & DMA_GSTS_CFIS)
+ WARN(1, KERN_WARNING
+ "Compatibility-format IRQs enabled despite intr remapping;\n"
+ "you are vulnerable to IRQ injection.\n");
+
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
@@ -526,20 +541,24 @@
static int __init intel_enable_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
+ bool x2apic_present;
int setup = 0;
int eim = 0;
+ x2apic_present = x2apic_supported();
+
if (parse_ioapics_under_ir() != 1) {
printk(KERN_INFO "Not enable interrupt remapping\n");
- return -1;
+ goto error;
}
- if (x2apic_supported()) {
+ if (x2apic_present) {
eim = !dmar_x2apic_optout();
- WARN(!eim, KERN_WARNING
- "Your BIOS is broken and requested that x2apic be disabled\n"
- "This will leave your machine vulnerable to irq-injection attacks\n"
- "Use 'intremap=no_x2apic_optout' to override BIOS request\n");
+ if (!eim)
+ printk(KERN_WARNING
+ "Your BIOS is broken and requested that x2apic be disabled.\n"
+ "This will slightly decrease performance.\n"
+ "Use 'intremap=no_x2apic_optout' to override BIOS request.\n");
}
for_each_drhd_unit(drhd) {
@@ -578,7 +597,7 @@
if (eim && !ecap_eim_support(iommu->ecap)) {
printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
" ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
- return -1;
+ goto error;
}
}
@@ -594,7 +613,7 @@
printk(KERN_ERR "DRHD %Lx: failed to enable queued, "
" invalidation, ecap %Lx, ret %d\n",
drhd->reg_base_addr, iommu->ecap, ret);
- return -1;
+ goto error;
}
}
@@ -617,6 +636,14 @@
goto error;
irq_remapping_enabled = 1;
+
+ /*
+ * VT-d has a different layout for IO-APIC entries when
+ * interrupt remapping is enabled. So it needs a special routine
+ * to print IO-APIC entries for debugging purposes too.
+ */
+ x86_io_apic_ops.print_entries = intel_ir_io_apic_print_entries;
+
pr_info("Enabled IRQ remapping in %s mode\n", eim ? "x2apic" : "xapic");
return eim ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE;
@@ -625,6 +652,11 @@
/*
* handle error condition gracefully here!
*/
+
+ if (x2apic_present)
+ WARN(1, KERN_WARNING
+ "Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n");
+
return -1;
}
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index faf85d6..d56f8c1 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -1,11 +1,18 @@
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/cpumask.h>
#include <linux/errno.h>
#include <linux/msi.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
#include <asm/hw_irq.h>
#include <asm/irq_remapping.h>
+#include <asm/processor.h>
+#include <asm/x86_init.h>
+#include <asm/apic.h>
#include "irq_remapping.h"
@@ -17,6 +24,152 @@
static struct irq_remap_ops *remap_ops;
+static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
+static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
+ int index, int sub_handle);
+static int set_remapped_irq_affinity(struct irq_data *data,
+ const struct cpumask *mask,
+ bool force);
+
+static bool irq_remapped(struct irq_cfg *cfg)
+{
+ return (cfg->remapped == 1);
+}
+
+static void irq_remapping_disable_io_apic(void)
+{
+ /*
+ * With interrupt-remapping, for now we will use virtual wire A
+ * mode, as virtual wire B is little complex (need to configure
+ * both IOAPIC RTE as well as interrupt-remapping table entry).
+ * As this gets called during crash dump, keep this simple for
+ * now.
+ */
+ if (cpu_has_apic || apic_from_smp_config())
+ disconnect_bsp_APIC(0);
+}
+
+static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
+{
+ int node, ret, sub_handle, index = 0;
+ unsigned int irq;
+ struct msi_desc *msidesc;
+
+ nvec = __roundup_pow_of_two(nvec);
+
+ WARN_ON(!list_is_singular(&dev->msi_list));
+ msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
+ WARN_ON(msidesc->irq);
+ WARN_ON(msidesc->msi_attrib.multiple);
+
+ node = dev_to_node(&dev->dev);
+ irq = __create_irqs(get_nr_irqs_gsi(), nvec, node);
+ if (irq == 0)
+ return -ENOSPC;
+
+ msidesc->msi_attrib.multiple = ilog2(nvec);
+ for (sub_handle = 0; sub_handle < nvec; sub_handle++) {
+ if (!sub_handle) {
+ index = msi_alloc_remapped_irq(dev, irq, nvec);
+ if (index < 0) {
+ ret = index;
+ goto error;
+ }
+ } else {
+ ret = msi_setup_remapped_irq(dev, irq + sub_handle,
+ index, sub_handle);
+ if (ret < 0)
+ goto error;
+ }
+ ret = setup_msi_irq(dev, msidesc, irq, sub_handle);
+ if (ret < 0)
+ goto error;
+ }
+ return 0;
+
+error:
+ destroy_irqs(irq, nvec);
+
+ /*
+ * Restore altered MSI descriptor fields and prevent just destroyed
+ * IRQs from tearing down again in default_teardown_msi_irqs()
+ */
+ msidesc->irq = 0;
+ msidesc->msi_attrib.multiple = 0;
+
+ return ret;
+}
+
+static int do_setup_msix_irqs(struct pci_dev *dev, int nvec)
+{
+ int node, ret, sub_handle, index = 0;
+ struct msi_desc *msidesc;
+ unsigned int irq;
+
+ node = dev_to_node(&dev->dev);
+ irq = get_nr_irqs_gsi();
+ sub_handle = 0;
+
+ list_for_each_entry(msidesc, &dev->msi_list, list) {
+
+ irq = create_irq_nr(irq, node);
+ if (irq == 0)
+ return -1;
+
+ if (sub_handle == 0)
+ ret = index = msi_alloc_remapped_irq(dev, irq, nvec);
+ else
+ ret = msi_setup_remapped_irq(dev, irq, index, sub_handle);
+
+ if (ret < 0)
+ goto error;
+
+ ret = setup_msi_irq(dev, msidesc, irq, 0);
+ if (ret < 0)
+ goto error;
+
+ sub_handle += 1;
+ irq += 1;
+ }
+
+ return 0;
+
+error:
+ destroy_irq(irq);
+ return ret;
+}
+
+static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
+ int nvec, int type)
+{
+ if (type == PCI_CAP_ID_MSI)
+ return do_setup_msi_irqs(dev, nvec);
+ else
+ return do_setup_msix_irqs(dev, nvec);
+}
+
+void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
+{
+ /*
+ * Intr-remapping uses pin number as the virtual vector
+ * in the RTE. Actual vector is programmed in
+ * intr-remapping table entry. Hence for the io-apic
+ * EOI we use the pin number.
+ */
+ io_apic_eoi(apic, pin);
+}
+
+static void __init irq_remapping_modify_x86_ops(void)
+{
+ x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
+ x86_io_apic_ops.set_affinity = set_remapped_irq_affinity;
+ x86_io_apic_ops.setup_entry = setup_ioapic_remapped_entry;
+ x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped;
+ x86_msi.setup_msi_irqs = irq_remapping_setup_msi_irqs;
+ x86_msi.setup_hpet_msi = setup_hpet_msi_remapped;
+ x86_msi.compose_msi_msg = compose_remapped_msi_msg;
+}
+
static __init int setup_nointremap(char *str)
{
disable_irq_remap = 1;
@@ -79,15 +232,24 @@
int __init irq_remapping_enable(void)
{
+ int ret;
+
if (!remap_ops || !remap_ops->enable)
return -ENODEV;
- return remap_ops->enable();
+ ret = remap_ops->enable();
+
+ if (irq_remapping_enabled)
+ irq_remapping_modify_x86_ops();
+
+ return ret;
}
void irq_remapping_disable(void)
{
- if (!remap_ops || !remap_ops->disable)
+ if (!irq_remapping_enabled ||
+ !remap_ops ||
+ !remap_ops->disable)
return;
remap_ops->disable();
@@ -95,7 +257,9 @@
int irq_remapping_reenable(int mode)
{
- if (!remap_ops || !remap_ops->reenable)
+ if (!irq_remapping_enabled ||
+ !remap_ops ||
+ !remap_ops->reenable)
return 0;
return remap_ops->reenable(mode);
@@ -103,6 +267,9 @@
int __init irq_remap_enable_fault_handling(void)
{
+ if (!irq_remapping_enabled)
+ return 0;
+
if (!remap_ops || !remap_ops->enable_faulting)
return -ENODEV;
@@ -133,23 +300,28 @@
void free_remapped_irq(int irq)
{
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
+
if (!remap_ops || !remap_ops->free_irq)
return;
- remap_ops->free_irq(irq);
+ if (irq_remapped(cfg))
+ remap_ops->free_irq(irq);
}
void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id)
{
- if (!remap_ops || !remap_ops->compose_msi_msg)
- return;
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
- remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
+ if (!irq_remapped(cfg))
+ native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
+ else if (remap_ops && remap_ops->compose_msi_msg)
+ remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
}
-int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
+static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
{
if (!remap_ops || !remap_ops->msi_alloc_irq)
return -ENODEV;
@@ -157,8 +329,8 @@
return remap_ops->msi_alloc_irq(pdev, irq, nvec);
}
-int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
+static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
+ int index, int sub_handle)
{
if (!remap_ops || !remap_ops->msi_setup_irq)
return -ENODEV;
@@ -173,3 +345,42 @@
return remap_ops->setup_hpet_msi(irq, id);
}
+
+void panic_if_irq_remap(const char *msg)
+{
+ if (irq_remapping_enabled)
+ panic(msg);
+}
+
+static void ir_ack_apic_edge(struct irq_data *data)
+{
+ ack_APIC_irq();
+}
+
+static void ir_ack_apic_level(struct irq_data *data)
+{
+ ack_APIC_irq();
+ eoi_ioapic_irq(data->irq, data->chip_data);
+}
+
+static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
+{
+ seq_printf(p, " IR-%s", data->chip->name);
+}
+
+void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+ chip->irq_print_chip = ir_print_prefix;
+ chip->irq_ack = ir_ack_apic_edge;
+ chip->irq_eoi = ir_ack_apic_level;
+ chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
+}
+
+bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
+{
+ if (!irq_remapped(cfg))
+ return false;
+ irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
+ irq_remap_modify_chip_defaults(chip);
+ return true;
+}
diff --git a/drivers/iommu/irq_remapping.h b/drivers/iommu/irq_remapping.h
index 95363ac..ecb6376 100644
--- a/drivers/iommu/irq_remapping.h
+++ b/drivers/iommu/irq_remapping.h
@@ -34,6 +34,7 @@
extern int disable_irq_remap;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
+extern int irq_remapping_enabled;
struct irq_remap_ops {
/* Check whether Interrupt Remapping is supported */
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 5f21f629..deda591 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/mISDNif.h>
#include <linux/kthread.h>
+#include <linux/sched.h>
#include "core.h"
static u_int *debug;
@@ -202,6 +203,9 @@
mISDNStackd(void *data)
{
struct mISDNstack *st = data;
+#ifdef MISDN_MSG_STATS
+ cputime_t utime, stime;
+#endif
int err = 0;
sigfillset(¤t->blocked);
@@ -303,9 +307,10 @@
"msg %d sleep %d stopped\n",
dev_name(&st->dev->dev), st->msg_cnt, st->sleep_cnt,
st->stopped_cnt);
+ task_cputime(st->thread, &utime, &stime);
printk(KERN_DEBUG
"mISDNStackd daemon for %s utime(%ld) stime(%ld)\n",
- dev_name(&st->dev->dev), st->thread->utime, st->thread->stime);
+ dev_name(&st->dev->dev), utime, stime);
printk(KERN_DEBUG
"mISDNStackd daemon for %s nvcsw(%ld) nivcsw(%ld)\n",
dev_name(&st->dev->dev), st->thread->nvcsw, st->thread->nivcsw);
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
new file mode 100644
index 0000000..9545c9f
--- /dev/null
+++ b/drivers/mailbox/Kconfig
@@ -0,0 +1,19 @@
+menuconfig MAILBOX
+ bool "Mailbox Hardware Support"
+ help
+ Mailbox is a framework to control hardware communication between
+ on-chip processors through queued messages and interrupt driven
+ signals. Say Y if your platform supports hardware mailboxes.
+
+if MAILBOX
+config PL320_MBOX
+ bool "ARM PL320 Mailbox"
+ depends on ARM_AMBA
+ help
+ An implementation of the ARM PL320 Interprocessor Communication
+ Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
+ send short messages between Highbank's A9 cores and the EnergyCore
+ Management Engine, primarily for cpufreq. Say Y here if you want
+ to use the PL320 IPCM support.
+
+endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
new file mode 100644
index 0000000..543ad6a
--- /dev/null
+++ b/drivers/mailbox/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o
diff --git a/drivers/mailbox/pl320-ipc.c b/drivers/mailbox/pl320-ipc.c
new file mode 100644
index 0000000..c45b3ae
--- /dev/null
+++ b/drivers/mailbox/pl320-ipc.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+
+#include <linux/mailbox.h>
+
+#define IPCMxSOURCE(m) ((m) * 0x40)
+#define IPCMxDSET(m) (((m) * 0x40) + 0x004)
+#define IPCMxDCLEAR(m) (((m) * 0x40) + 0x008)
+#define IPCMxDSTATUS(m) (((m) * 0x40) + 0x00C)
+#define IPCMxMODE(m) (((m) * 0x40) + 0x010)
+#define IPCMxMSET(m) (((m) * 0x40) + 0x014)
+#define IPCMxMCLEAR(m) (((m) * 0x40) + 0x018)
+#define IPCMxMSTATUS(m) (((m) * 0x40) + 0x01C)
+#define IPCMxSEND(m) (((m) * 0x40) + 0x020)
+#define IPCMxDR(m, dr) (((m) * 0x40) + ((dr) * 4) + 0x024)
+
+#define IPCMMIS(irq) (((irq) * 8) + 0x800)
+#define IPCMRIS(irq) (((irq) * 8) + 0x804)
+
+#define MBOX_MASK(n) (1 << (n))
+#define IPC_TX_MBOX 1
+#define IPC_RX_MBOX 2
+
+#define CHAN_MASK(n) (1 << (n))
+#define A9_SOURCE 1
+#define M3_SOURCE 0
+
+static void __iomem *ipc_base;
+static int ipc_irq;
+static DEFINE_MUTEX(ipc_m1_lock);
+static DECLARE_COMPLETION(ipc_completion);
+static ATOMIC_NOTIFIER_HEAD(ipc_notifier);
+
+static inline void set_destination(int source, int mbox)
+{
+ __raw_writel(CHAN_MASK(source), ipc_base + IPCMxDSET(mbox));
+ __raw_writel(CHAN_MASK(source), ipc_base + IPCMxMSET(mbox));
+}
+
+static inline void clear_destination(int source, int mbox)
+{
+ __raw_writel(CHAN_MASK(source), ipc_base + IPCMxDCLEAR(mbox));
+ __raw_writel(CHAN_MASK(source), ipc_base + IPCMxMCLEAR(mbox));
+}
+
+static void __ipc_send(int mbox, u32 *data)
+{
+ int i;
+ for (i = 0; i < 7; i++)
+ __raw_writel(data[i], ipc_base + IPCMxDR(mbox, i));
+ __raw_writel(0x1, ipc_base + IPCMxSEND(mbox));
+}
+
+static u32 __ipc_rcv(int mbox, u32 *data)
+{
+ int i;
+ for (i = 0; i < 7; i++)
+ data[i] = __raw_readl(ipc_base + IPCMxDR(mbox, i));
+ return data[1];
+}
+
+/* blocking implmentation from the A9 side, not usuable in interrupts! */
+int pl320_ipc_transmit(u32 *data)
+{
+ int ret;
+
+ mutex_lock(&ipc_m1_lock);
+
+ init_completion(&ipc_completion);
+ __ipc_send(IPC_TX_MBOX, data);
+ ret = wait_for_completion_timeout(&ipc_completion,
+ msecs_to_jiffies(1000));
+ if (ret == 0) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ ret = __ipc_rcv(IPC_TX_MBOX, data);
+out:
+ mutex_unlock(&ipc_m1_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pl320_ipc_transmit);
+
+static irqreturn_t ipc_handler(int irq, void *dev)
+{
+ u32 irq_stat;
+ u32 data[7];
+
+ irq_stat = __raw_readl(ipc_base + IPCMMIS(1));
+ if (irq_stat & MBOX_MASK(IPC_TX_MBOX)) {
+ __raw_writel(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
+ complete(&ipc_completion);
+ }
+ if (irq_stat & MBOX_MASK(IPC_RX_MBOX)) {
+ __ipc_rcv(IPC_RX_MBOX, data);
+ atomic_notifier_call_chain(&ipc_notifier, data[0], data + 1);
+ __raw_writel(2, ipc_base + IPCMxSEND(IPC_RX_MBOX));
+ }
+
+ return IRQ_HANDLED;
+}
+
+int pl320_ipc_register_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&ipc_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(pl320_ipc_register_notifier);
+
+int pl320_ipc_unregister_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&ipc_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(pl320_ipc_unregister_notifier);
+
+static int __init pl320_probe(struct amba_device *adev,
+ const struct amba_id *id)
+{
+ int ret;
+
+ ipc_base = ioremap(adev->res.start, resource_size(&adev->res));
+ if (ipc_base == NULL)
+ return -ENOMEM;
+
+ __raw_writel(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
+
+ ipc_irq = adev->irq[0];
+ ret = request_irq(ipc_irq, ipc_handler, 0, dev_name(&adev->dev), NULL);
+ if (ret < 0)
+ goto err;
+
+ /* Init slow mailbox */
+ __raw_writel(CHAN_MASK(A9_SOURCE),
+ ipc_base + IPCMxSOURCE(IPC_TX_MBOX));
+ __raw_writel(CHAN_MASK(M3_SOURCE),
+ ipc_base + IPCMxDSET(IPC_TX_MBOX));
+ __raw_writel(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
+ ipc_base + IPCMxMSET(IPC_TX_MBOX));
+
+ /* Init receive mailbox */
+ __raw_writel(CHAN_MASK(M3_SOURCE),
+ ipc_base + IPCMxSOURCE(IPC_RX_MBOX));
+ __raw_writel(CHAN_MASK(A9_SOURCE),
+ ipc_base + IPCMxDSET(IPC_RX_MBOX));
+ __raw_writel(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
+ ipc_base + IPCMxMSET(IPC_RX_MBOX));
+
+ return 0;
+err:
+ iounmap(ipc_base);
+ return ret;
+}
+
+static struct amba_id pl320_ids[] = {
+ {
+ .id = 0x00041320,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl320_driver = {
+ .drv = {
+ .name = "pl320",
+ },
+ .id_table = pl320_ids,
+ .probe = pl320_probe,
+};
+
+static int __init ipc_init(void)
+{
+ return amba_driver_register(&pl320_driver);
+}
+module_init(ipc_init);
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 49d9504..0223ad2 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -1820,7 +1820,7 @@
struct dvb_frontend *fe = dvbdev->priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
- int err = -ENOTTY;
+ int err = -EOPNOTSUPP;
dev_dbg(fe->dvb->device, "%s: (%d)\n", __func__, _IOC_NR(cmd));
if (fepriv->exit != DVB_FE_NO_EXIT)
@@ -1938,7 +1938,7 @@
}
} else
- err = -ENOTTY;
+ err = -EOPNOTSUPP;
out:
kfree(tvp);
@@ -2071,7 +2071,7 @@
struct dvb_frontend *fe = dvbdev->priv;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int err = -ENOTTY;
+ int err = -EOPNOTSUPP;
switch (cmd) {
case FE_GET_INFO: {
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 4778bb1..8b5d685 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -750,6 +750,12 @@
.end = AB8500_INT_CH_WD_EXP,
.flags = IORESOURCE_IRQ,
},
+ {
+ .name = "VBUS_CH_DROP_END",
+ .start = AB8500_INT_VBUS_CH_DROP_END,
+ .end = AB8500_INT_VBUS_CH_DROP_END,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct resource ab8500_btemp_resources[] = {
@@ -1012,40 +1018,32 @@
.of_compatible = "stericsson,ab8500-charger",
.num_resources = ARRAY_SIZE(ab8500_charger_resources),
.resources = ab8500_charger_resources,
-#ifndef CONFIG_OF
.platform_data = &ab8500_bm_data,
.pdata_size = sizeof(ab8500_bm_data),
-#endif
},
{
.name = "ab8500-btemp",
.of_compatible = "stericsson,ab8500-btemp",
.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
.resources = ab8500_btemp_resources,
-#ifndef CONFIG_OF
.platform_data = &ab8500_bm_data,
.pdata_size = sizeof(ab8500_bm_data),
-#endif
},
{
.name = "ab8500-fg",
.of_compatible = "stericsson,ab8500-fg",
.num_resources = ARRAY_SIZE(ab8500_fg_resources),
.resources = ab8500_fg_resources,
-#ifndef CONFIG_OF
.platform_data = &ab8500_bm_data,
.pdata_size = sizeof(ab8500_bm_data),
-#endif
},
{
.name = "ab8500-chargalg",
.of_compatible = "stericsson,ab8500-chargalg",
.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
.resources = ab8500_chargalg_resources,
-#ifndef CONFIG_OF
.platform_data = &ab8500_bm_data,
.pdata_size = sizeof(ab8500_bm_data),
-#endif
},
};
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 49d361a..77ee26ef 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
@@ -60,6 +61,15 @@
},
};
+#ifdef CONFIG_OF
+static struct of_device_id sec_dt_match[] = {
+ { .compatible = "samsung,s5m8767-pmic",
+ .data = (void *)S5M8767X,
+ },
+ {},
+};
+#endif
+
int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
{
return regmap_read(sec_pmic->regmap, reg, dest);
@@ -95,6 +105,57 @@
.val_bits = 8,
};
+
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for s5m8767 are parsed here from the
+ * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and
+ * others have to parse their own platform data elements from device tree.
+ *
+ * The s5m8767 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ struct sec_platform_data *pd;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * ToDo: the 'wakeup' member in the platform data is more of a linux
+ * specfic information. Hence, there is no binding for that yet and
+ * not parsed here.
+ */
+
+ return pd;
+}
+#else
+static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+ if (i2c->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(sec_dt_match, i2c->dev.of_node);
+ return (int)match->data;
+ }
+#endif
+ return (int)id->driver_data;
+}
+
static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -111,13 +172,22 @@
sec_pmic->dev = &i2c->dev;
sec_pmic->i2c = i2c;
sec_pmic->irq = i2c->irq;
- sec_pmic->type = id->driver_data;
+ sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+ if (sec_pmic->dev->of_node) {
+ pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
+ if (IS_ERR(pdata)) {
+ ret = PTR_ERR(pdata);
+ return ret;
+ }
+ pdata->device_type = sec_pmic->type;
+ }
if (pdata) {
sec_pmic->device_type = pdata->device_type;
sec_pmic->ono = pdata->ono;
sec_pmic->irq_base = pdata->irq_base;
sec_pmic->wakeup = pdata->wakeup;
+ sec_pmic->pdata = pdata;
}
sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config);
@@ -192,6 +262,7 @@
.driver = {
.name = "sec_pmic",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sec_dt_match),
},
.probe = sec_pmic_probe,
.remove = sec_pmic_remove,
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 1133a64..f6fcb87b 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -96,6 +96,7 @@
.mask_base = ARIZONA_AOD_IRQ_MASK_IRQ1,
.ack_base = ARIZONA_AOD_IRQ1,
.wake_base = ARIZONA_WAKE_CONTROL,
+ .wake_invert = 1,
.num_regs = 1,
.irqs = wm5102_aod_irqs,
.num_irqs = ARRAY_SIZE(wm5102_aod_irqs),
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index adda6b1..c415998 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -255,6 +255,7 @@
.mask_base = ARIZONA_AOD_IRQ_MASK_IRQ1,
.ack_base = ARIZONA_AOD_IRQ1,
.wake_base = ARIZONA_WAKE_CONTROL,
+ .wake_invert = 1,
.num_regs = 1,
.irqs = wm5110_aod_irqs,
.num_irqs = ARRAY_SIZE(wm5110_aod_irqs),
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 492c8ca..44d273c 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -517,7 +517,7 @@
{
int ret;
- if (!is_uv_system())
+ if (!is_uv_system() || (is_uvx_hub() && !is_uv2_hub()))
return 0;
#if defined CONFIG_IA64
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1507723..372e921 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/log2.h>
+#include <linux/mmc/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/amba/bus.h>
@@ -59,6 +60,7 @@
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
+ * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
*/
struct variant_data {
unsigned int clkreg;
@@ -71,6 +73,7 @@
bool blksz_datactrl16;
u32 pwrreg_powerup;
bool signal_direction;
+ bool pwrreg_clkgate;
};
static struct variant_data variant_arm = {
@@ -87,6 +90,14 @@
.pwrreg_powerup = MCI_PWR_UP,
};
+static struct variant_data variant_arm_extended_fifo_hwfc = {
+ .fifosize = 128 * 4,
+ .fifohalfsize = 64 * 4,
+ .clkreg_enable = MCI_ARM_HWFCEN,
+ .datalength_bits = 16,
+ .pwrreg_powerup = MCI_PWR_UP,
+};
+
static struct variant_data variant_u300 = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
@@ -95,6 +106,7 @@
.sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_nomadik = {
@@ -106,6 +118,7 @@
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_ux500 = {
@@ -118,6 +131,7 @@
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_ux500v2 = {
@@ -131,9 +145,28 @@
.blksz_datactrl16 = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
/*
+ * Validate mmc prerequisites
+ */
+static int mmci_validate_data(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ if (!data)
+ return 0;
+
+ if (!is_power_of_2(data->blksz)) {
+ dev_err(mmc_dev(host->mmc),
+ "unsupported block size (%d bytes)\n", data->blksz);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
* This must be called with host->lock held
*/
static void mmci_write_clkreg(struct mmci_host *host, u32 clk)
@@ -202,6 +235,9 @@
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
clk |= MCI_ST_8BIT_BUS;
+ if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+ clk |= MCI_ST_UX500_NEG_EDGE;
+
mmci_write_clkreg(host, clk);
}
@@ -352,10 +388,33 @@
host->dma_rx_channel = host->dma_tx_channel = NULL;
}
+static void mmci_dma_data_error(struct mmci_host *host)
+{
+ dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
+ dmaengine_terminate_all(host->dma_current);
+ host->dma_current = NULL;
+ host->dma_desc_current = NULL;
+ host->data->host_cookie = 0;
+}
+
static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
{
- struct dma_chan *chan = host->dma_current;
+ struct dma_chan *chan;
enum dma_data_direction dir;
+
+ if (data->flags & MMC_DATA_READ) {
+ dir = DMA_FROM_DEVICE;
+ chan = host->dma_rx_channel;
+ } else {
+ dir = DMA_TO_DEVICE;
+ chan = host->dma_tx_channel;
+ }
+
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+}
+
+static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
+{
u32 status;
int i;
@@ -374,19 +433,13 @@
* contiguous buffers. On TX, we'll get a FIFO underrun error.
*/
if (status & MCI_RXDATAAVLBLMASK) {
- dmaengine_terminate_all(chan);
+ mmci_dma_data_error(host);
if (!data->error)
data->error = -EIO;
}
- if (data->flags & MMC_DATA_WRITE) {
- dir = DMA_TO_DEVICE;
- } else {
- dir = DMA_FROM_DEVICE;
- }
-
if (!data->host_cookie)
- dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+ mmci_dma_unmap(host, data);
/*
* Use of DMA with scatter-gather is impossible.
@@ -396,16 +449,15 @@
dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n");
mmci_dma_release(host);
}
+
+ host->dma_current = NULL;
+ host->dma_desc_current = NULL;
}
-static void mmci_dma_data_error(struct mmci_host *host)
-{
- dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
- dmaengine_terminate_all(host->dma_current);
-}
-
-static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
- struct mmci_host_next *next)
+/* prepares DMA channel and DMA descriptor, returns non-zero on failure */
+static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
+ struct dma_chan **dma_chan,
+ struct dma_async_tx_descriptor **dma_desc)
{
struct variant_data *variant = host->variant;
struct dma_slave_config conf = {
@@ -423,16 +475,6 @@
enum dma_data_direction buffer_dirn;
int nr_sg;
- /* Check if next job is already prepared */
- if (data->host_cookie && !next &&
- host->dma_current && host->dma_desc_current)
- return 0;
-
- if (!next) {
- host->dma_current = NULL;
- host->dma_desc_current = NULL;
- }
-
if (data->flags & MMC_DATA_READ) {
conf.direction = DMA_DEV_TO_MEM;
buffer_dirn = DMA_FROM_DEVICE;
@@ -462,29 +504,41 @@
if (!desc)
goto unmap_exit;
- if (next) {
- next->dma_chan = chan;
- next->dma_desc = desc;
- } else {
- host->dma_current = chan;
- host->dma_desc_current = desc;
- }
+ *dma_chan = chan;
+ *dma_desc = desc;
return 0;
unmap_exit:
- if (!next)
- dmaengine_terminate_all(chan);
dma_unmap_sg(device->dev, data->sg, data->sg_len, buffer_dirn);
return -ENOMEM;
}
+static inline int mmci_dma_prep_data(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ /* Check if next job is already prepared. */
+ if (host->dma_current && host->dma_desc_current)
+ return 0;
+
+ /* No job were prepared thus do it now. */
+ return __mmci_dma_prep_data(host, data, &host->dma_current,
+ &host->dma_desc_current);
+}
+
+static inline int mmci_dma_prep_next(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ struct mmci_host_next *nd = &host->next_data;
+ return __mmci_dma_prep_data(host, data, &nd->dma_chan, &nd->dma_desc);
+}
+
static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
{
int ret;
struct mmc_data *data = host->data;
- ret = mmci_dma_prep_data(host, host->data, NULL);
+ ret = mmci_dma_prep_data(host, host->data);
if (ret)
return ret;
@@ -514,19 +568,11 @@
{
struct mmci_host_next *next = &host->next_data;
- if (data->host_cookie && data->host_cookie != next->cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
- data->host_cookie = 0;
- }
-
- if (!data->host_cookie)
- return;
+ WARN_ON(data->host_cookie && data->host_cookie != next->cookie);
+ WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan));
host->dma_desc_current = next->dma_desc;
host->dma_current = next->dma_chan;
-
next->dma_desc = NULL;
next->dma_chan = NULL;
}
@@ -541,19 +587,13 @@
if (!data)
return;
- if (data->host_cookie) {
- data->host_cookie = 0;
- return;
- }
+ BUG_ON(data->host_cookie);
- /* if config for dma */
- if (((data->flags & MMC_DATA_WRITE) && host->dma_tx_channel) ||
- ((data->flags & MMC_DATA_READ) && host->dma_rx_channel)) {
- if (mmci_dma_prep_data(host, data, nd))
- data->host_cookie = 0;
- else
- data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie;
- }
+ if (mmci_validate_data(host, data))
+ return;
+
+ if (!mmci_dma_prep_next(host, data))
+ data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie;
}
static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
@@ -561,29 +601,23 @@
{
struct mmci_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
- struct dma_chan *chan;
- enum dma_data_direction dir;
- if (!data)
+ if (!data || !data->host_cookie)
return;
- if (data->flags & MMC_DATA_READ) {
- dir = DMA_FROM_DEVICE;
- chan = host->dma_rx_channel;
- } else {
- dir = DMA_TO_DEVICE;
- chan = host->dma_tx_channel;
- }
+ mmci_dma_unmap(host, data);
+ if (err) {
+ struct mmci_host_next *next = &host->next_data;
+ struct dma_chan *chan;
+ if (data->flags & MMC_DATA_READ)
+ chan = host->dma_rx_channel;
+ else
+ chan = host->dma_tx_channel;
+ dmaengine_terminate_all(chan);
- /* if config for dma */
- if (chan) {
- if (err)
- dmaengine_terminate_all(chan);
- if (data->host_cookie)
- dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, dir);
- mrq->data->host_cookie = 0;
+ next->dma_desc = NULL;
+ next->dma_chan = NULL;
}
}
@@ -604,6 +638,11 @@
{
}
+static inline void mmci_dma_finalize(struct mmci_host *host,
+ struct mmc_data *data)
+{
+}
+
static inline void mmci_dma_data_error(struct mmci_host *host)
{
}
@@ -680,6 +719,9 @@
mmci_write_clkreg(host, clk);
}
+ if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+ datactrl |= MCI_ST_DPSM_DDRMODE;
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -751,8 +793,10 @@
u32 remain, success;
/* Terminate the DMA transfer */
- if (dma_inprogress(host))
+ if (dma_inprogress(host)) {
mmci_dma_data_error(host);
+ mmci_dma_unmap(host, data);
+ }
/*
* Calculate how far we are into the transfer. Note that
@@ -791,7 +835,7 @@
if (status & MCI_DATAEND || data->error) {
if (dma_inprogress(host))
- mmci_dma_unmap(host, data);
+ mmci_dma_finalize(host, data);
mmci_stop_data(host);
if (!data->error)
@@ -828,8 +872,10 @@
if (!cmd->data || cmd->error) {
if (host->data) {
/* Terminate the DMA transfer */
- if (dma_inprogress(host))
+ if (dma_inprogress(host)) {
mmci_dma_data_error(host);
+ mmci_dma_unmap(host, host->data);
+ }
mmci_stop_data(host);
}
mmci_request_end(host, cmd->mrq);
@@ -1055,10 +1101,8 @@
WARN_ON(host->mrq != NULL);
- if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
- mrq->data->blksz);
- mrq->cmd->error = -EINVAL;
+ mrq->cmd->error = mmci_validate_data(host, mrq->data);
+ if (mrq->cmd->error) {
mmc_request_done(mmc, mrq);
return;
}
@@ -1086,7 +1130,6 @@
struct variant_data *variant = host->variant;
u32 pwr = 0;
unsigned long flags;
- int ret;
pm_runtime_get_sync(mmc_dev(mmc));
@@ -1096,23 +1139,13 @@
switch (ios->power_mode) {
case MMC_POWER_OFF:
- if (host->vcc)
- ret = mmc_regulator_set_ocr(mmc, host->vcc, 0);
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
break;
case MMC_POWER_UP:
- if (host->vcc) {
- ret = mmc_regulator_set_ocr(mmc, host->vcc, ios->vdd);
- if (ret) {
- dev_err(mmc_dev(mmc), "unable to set OCR\n");
- /*
- * The .set_ios() function in the mmc_host_ops
- * struct return void, and failing to set the
- * power should be rare so we print an error
- * and return here.
- */
- goto out;
- }
- }
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+
/*
* The ST Micro variant doesn't have the PL180s MCI_PWR_UP
* and instead uses MCI_PWR_ON so apply whatever value is
@@ -1154,6 +1187,13 @@
}
}
+ /*
+ * If clock = 0 and the variant requires the MMCIPOWER to be used for
+ * gating the clock, the MCI_PWR_ON bit is cleared.
+ */
+ if (!ios->clock && variant->pwrreg_clkgate)
+ pwr &= ~MCI_PWR_ON;
+
spin_lock_irqsave(&host->lock, flags);
mmci_set_clkreg(host, ios->clock);
@@ -1161,7 +1201,6 @@
spin_unlock_irqrestore(&host->lock, flags);
- out:
pm_runtime_mark_last_busy(mmc_dev(mmc));
pm_runtime_put_autosuspend(mmc_dev(mmc));
}
@@ -1384,32 +1423,19 @@
} else
dev_warn(&dev->dev, "could not get default pinstate\n");
-#ifdef CONFIG_REGULATOR
- /* If we're using the regulator framework, try to fetch a regulator */
- host->vcc = regulator_get(&dev->dev, "vmmc");
- if (IS_ERR(host->vcc))
- host->vcc = NULL;
- else {
- int mask = mmc_regulator_get_ocrmask(host->vcc);
-
- if (mask < 0)
- dev_err(&dev->dev, "error getting OCR mask (%d)\n",
- mask);
- else {
- host->mmc->ocr_avail = (u32) mask;
- if (plat->ocr_mask)
- dev_warn(&dev->dev,
- "Provided ocr_mask/setpower will not be used "
- "(using regulator instead)\n");
- }
- }
-#endif
- /* Fall back to platform data if no regulator is found */
- if (host->vcc == NULL)
+ /* Get regulators and the supported OCR mask */
+ mmc_regulator_get_supply(mmc);
+ if (!mmc->ocr_avail)
mmc->ocr_avail = plat->ocr_mask;
+ else if (plat->ocr_mask)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+
mmc->caps = plat->capabilities;
mmc->caps2 = plat->capabilities2;
+ /* We support these PM capabilities. */
+ mmc->pm_caps = MMC_PM_KEEP_POWER;
+
/*
* We can do SGIO
*/
@@ -1585,10 +1611,6 @@
clk_disable_unprepare(host->clk);
clk_put(host->clk);
- if (host->vcc)
- mmc_regulator_set_ocr(mmc, host->vcc, 0);
- regulator_put(host->vcc);
-
mmc_free_host(mmc);
amba_release_regions(dev);
@@ -1636,8 +1658,37 @@
}
#endif
+#ifdef CONFIG_PM_RUNTIME
+static int mmci_runtime_suspend(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
+
+ if (mmc) {
+ struct mmci_host *host = mmc_priv(mmc);
+ clk_disable_unprepare(host->clk);
+ }
+
+ return 0;
+}
+
+static int mmci_runtime_resume(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
+
+ if (mmc) {
+ struct mmci_host *host = mmc_priv(mmc);
+ clk_prepare_enable(host->clk);
+ }
+
+ return 0;
+}
+#endif
+
static const struct dev_pm_ops mmci_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mmci_suspend, mmci_resume)
+ SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
};
static struct amba_id mmci_ids[] = {
@@ -1652,6 +1703,11 @@
.data = &variant_arm_extended_fifo,
},
{
+ .id = 0x02041180,
+ .mask = 0xff0fffff,
+ .data = &variant_arm_extended_fifo_hwfc,
+ },
+ {
.id = 0x00041181,
.mask = 0x000fffff,
.data = &variant_arm,
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d34d8c0..1f33ad5 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -28,6 +28,8 @@
#define MCI_ST_UX500_NEG_EDGE (1 << 13)
#define MCI_ST_UX500_HWFCEN (1 << 14)
#define MCI_ST_UX500_CLK_INV (1 << 15)
+/* Modified PL180 on Versatile Express platform */
+#define MCI_ARM_HWFCEN (1 << 12)
#define MMCIARGUMENT 0x008
#define MMCICOMMAND 0x00c
@@ -193,7 +195,6 @@
/* pio stuff */
struct sg_mapping_iter sg_miter;
unsigned int size;
- struct regulator *vcc;
/* pinctrl handles */
struct pinctrl *pinctrl;
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 44406a4..d1e7f10 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -339,8 +339,7 @@
*/
static void peak_pciec_start_led_work(struct peak_pciec_card *card)
{
- if (!delayed_work_pending(&card->led_work))
- schedule_delayed_work(&card->led_work, HZ);
+ schedule_delayed_work(&card->led_work, HZ);
}
/*
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0c9accb..e91d7d7 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -53,7 +53,7 @@
{
enum of_gpio_flags f;
struct mdio_mux_gpio_state *s;
- unsigned int num_gpios;
+ int num_gpios;
unsigned int n;
int r;
@@ -61,7 +61,7 @@
return -ENODEV;
num_gpios = of_gpio_count(pdev->dev.of_node);
- if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
+ if (num_gpios <= 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
return -ENODEV;
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index cedd4d3..4889613 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -156,7 +156,7 @@
struct i2400m *i2400m = container_of(ws, struct i2400m, wake_tx_ws);
struct net_device *net_dev = i2400m->wimax_dev.net_dev;
struct device *dev = i2400m_dev(i2400m);
- struct sk_buff *skb = i2400m->wake_tx_skb;
+ struct sk_buff *skb;
unsigned long flags;
spin_lock_irqsave(&i2400m->tx_lock, flags);
@@ -236,23 +236,26 @@
void i2400m_net_wake_stop(struct i2400m *i2400m)
{
struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *wake_tx_skb;
+ unsigned long flags;
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
- /* See i2400m_hard_start_xmit(), references are taken there
- * and here we release them if the work was still
- * pending. Note we can't differentiate work not pending vs
- * never scheduled, so the NULL check does that. */
- if (cancel_work_sync(&i2400m->wake_tx_ws) == 0
- && i2400m->wake_tx_skb != NULL) {
- unsigned long flags;
- struct sk_buff *wake_tx_skb;
- spin_lock_irqsave(&i2400m->tx_lock, flags);
- wake_tx_skb = i2400m->wake_tx_skb; /* compat help */
- i2400m->wake_tx_skb = NULL; /* compat help */
- spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+ /*
+ * See i2400m_hard_start_xmit(), references are taken there and
+ * here we release them if the packet was still pending.
+ */
+ cancel_work_sync(&i2400m->wake_tx_ws);
+
+ spin_lock_irqsave(&i2400m->tx_lock, flags);
+ wake_tx_skb = i2400m->wake_tx_skb;
+ i2400m->wake_tx_skb = NULL;
+ spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+
+ if (wake_tx_skb) {
i2400m_put(i2400m);
kfree_skb(wake_tx_skb);
}
+
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}
@@ -288,7 +291,7 @@
* and if pending, release those resources. */
result = 0;
spin_lock_irqsave(&i2400m->tx_lock, flags);
- if (!work_pending(&i2400m->wake_tx_ws)) {
+ if (!i2400m->wake_tx_skb) {
netif_stop_queue(net_dev);
i2400m_get(i2400m);
i2400m->wake_tx_skb = skb_get(skb); /* transfer ref count */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 04d5e64..cb066f6 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -2181,9 +2181,10 @@
mod_delayed_work(system_wq, &priv->rf_kill, round_jiffies_relative(HZ));
}
-static void send_scan_event(void *data)
+static void ipw2100_scan_event(struct work_struct *work)
{
- struct ipw2100_priv *priv = data;
+ struct ipw2100_priv *priv = container_of(work, struct ipw2100_priv,
+ scan_event.work);
union iwreq_data wrqu;
wrqu.data.length = 0;
@@ -2191,18 +2192,6 @@
wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
}
-static void ipw2100_scan_event_later(struct work_struct *work)
-{
- send_scan_event(container_of(work, struct ipw2100_priv,
- scan_event_later.work));
-}
-
-static void ipw2100_scan_event_now(struct work_struct *work)
-{
- send_scan_event(container_of(work, struct ipw2100_priv,
- scan_event_now));
-}
-
static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
{
IPW_DEBUG_SCAN("scan complete\n");
@@ -2212,13 +2201,11 @@
/* Only userspace-requested scan completion events go out immediately */
if (!priv->user_requested_scan) {
- if (!delayed_work_pending(&priv->scan_event_later))
- schedule_delayed_work(&priv->scan_event_later,
- round_jiffies_relative(msecs_to_jiffies(4000)));
+ schedule_delayed_work(&priv->scan_event,
+ round_jiffies_relative(msecs_to_jiffies(4000)));
} else {
priv->user_requested_scan = 0;
- cancel_delayed_work(&priv->scan_event_later);
- schedule_work(&priv->scan_event_now);
+ mod_delayed_work(system_wq, &priv->scan_event, 0);
}
}
@@ -4459,8 +4446,7 @@
cancel_delayed_work_sync(&priv->wx_event_work);
cancel_delayed_work_sync(&priv->hang_check);
cancel_delayed_work_sync(&priv->rf_kill);
- cancel_work_sync(&priv->scan_event_now);
- cancel_delayed_work_sync(&priv->scan_event_later);
+ cancel_delayed_work_sync(&priv->scan_event);
}
static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
@@ -6192,8 +6178,7 @@
INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
- INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
- INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
+ INIT_DELAYED_WORK(&priv->scan_event, ipw2100_scan_event);
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
ipw2100_irq_tasklet, (unsigned long)priv);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index 5fe17cb..c6d7879 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -577,8 +577,7 @@
struct delayed_work wx_event_work;
struct delayed_work hang_check;
struct delayed_work rf_kill;
- struct work_struct scan_event_now;
- struct delayed_work scan_event_later;
+ struct delayed_work scan_event;
int user_requested_scan;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 3e824b8..d96257b 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -4480,18 +4480,11 @@
{
/* Only userspace-requested scan completion events go out immediately */
if (!priv->user_requested_scan) {
- if (!delayed_work_pending(&priv->scan_event))
- schedule_delayed_work(&priv->scan_event,
- round_jiffies_relative(msecs_to_jiffies(4000)));
+ schedule_delayed_work(&priv->scan_event,
+ round_jiffies_relative(msecs_to_jiffies(4000)));
} else {
- union iwreq_data wrqu;
-
priv->user_requested_scan = 0;
- cancel_delayed_work(&priv->scan_event);
-
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
+ mod_delayed_work(system_wq, &priv->scan_event, 0);
}
}
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index d3fb9a1..e63f646 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -1743,6 +1743,8 @@
static struct mmc_host *reset_host;
static void sdio_card_reset_worker(struct work_struct *work)
{
+ struct mmc_host *target = reset_host;
+
/* The actual reset operation must be run outside of driver thread.
* This is because mmc_remove_host() will cause the device to be
* instantly destroyed, and the driver then needs to end its thread,
@@ -1752,10 +1754,10 @@
*/
pr_err("Resetting card...\n");
- mmc_remove_host(reset_host);
+ mmc_remove_host(target);
/* 20ms delay is based on experiment with sdhci controller */
mdelay(20);
- mmc_add_host(reset_host);
+ mmc_add_host(target);
}
static DECLARE_WORK(card_reset_work, sdio_card_reset_worker);
@@ -1764,9 +1766,6 @@
{
struct sdio_mmc_card *card = adapter->card;
- if (work_pending(&card_reset_work))
- return;
-
reset_host = card->func->card->host;
schedule_work(&card_reset_work);
}
diff --git a/drivers/net/wireless/ti/wl1251/ps.c b/drivers/net/wireless/ti/wl1251/ps.c
index db719f7..b9e27b9 100644
--- a/drivers/net/wireless/ti/wl1251/ps.c
+++ b/drivers/net/wireless/ti/wl1251/ps.c
@@ -68,8 +68,7 @@
unsigned long timeout, start;
u32 elp_reg;
- if (delayed_work_pending(&wl->elp_work))
- cancel_delayed_work(&wl->elp_work);
+ cancel_delayed_work(&wl->elp_work);
if (!wl->elp)
return 0;
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 2390ddb..321d3ef 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -24,38 +24,21 @@
#include <linux/slab.h>
#include <linux/proc_fs.h>
-/**
- * struct alias_prop - Alias property in 'aliases' node
- * @link: List node to link the structure in aliases_lookup list
- * @alias: Alias property name
- * @np: Pointer to device_node that the alias stands for
- * @id: Index value from end of alias name
- * @stem: Alias string without the index
- *
- * The structure represents one alias property of 'aliases' node as
- * an entry in aliases_lookup list.
- */
-struct alias_prop {
- struct list_head link;
- const char *alias;
- struct device_node *np;
- int id;
- char stem[0];
-};
+#include "of_private.h"
-static LIST_HEAD(aliases_lookup);
+LIST_HEAD(aliases_lookup);
struct device_node *of_allnodes;
EXPORT_SYMBOL(of_allnodes);
struct device_node *of_chosen;
struct device_node *of_aliases;
-static DEFINE_MUTEX(of_aliases_mutex);
+DEFINE_MUTEX(of_aliases_mutex);
/* use when traversing tree through the allnext, child, sibling,
* or parent members of struct device_node.
*/
-DEFINE_RWLOCK(devtree_lock);
+DEFINE_RAW_SPINLOCK(devtree_lock);
int of_n_addr_cells(struct device_node *np)
{
@@ -164,16 +147,14 @@
EXPORT_SYMBOL(of_node_put);
#endif /* CONFIG_OF_DYNAMIC */
-struct property *of_find_property(const struct device_node *np,
- const char *name,
- int *lenp)
+static struct property *__of_find_property(const struct device_node *np,
+ const char *name, int *lenp)
{
struct property *pp;
if (!np)
return NULL;
- read_lock(&devtree_lock);
for (pp = np->properties; pp; pp = pp->next) {
if (of_prop_cmp(pp->name, name) == 0) {
if (lenp)
@@ -181,7 +162,20 @@
break;
}
}
- read_unlock(&devtree_lock);
+
+ return pp;
+}
+
+struct property *of_find_property(const struct device_node *np,
+ const char *name,
+ int *lenp)
+{
+ struct property *pp;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&devtree_lock, flags);
+ pp = __of_find_property(np, name, lenp);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return pp;
}
@@ -199,13 +193,13 @@
{
struct device_node *np;
- read_lock(&devtree_lock);
+ raw_spin_lock(&devtree_lock);
np = prev ? prev->allnext : of_allnodes;
for (; np != NULL; np = np->allnext)
if (of_node_get(np))
break;
of_node_put(prev);
- read_unlock(&devtree_lock);
+ raw_spin_unlock(&devtree_lock);
return np;
}
EXPORT_SYMBOL(of_find_all_nodes);
@@ -214,8 +208,20 @@
* Find a property with a given name for a given node
* and return the value.
*/
+static const void *__of_get_property(const struct device_node *np,
+ const char *name, int *lenp)
+{
+ struct property *pp = __of_find_property(np, name, lenp);
+
+ return pp ? pp->value : NULL;
+}
+
+/*
+ * Find a property with a given name for a given node
+ * and return the value.
+ */
const void *of_get_property(const struct device_node *np, const char *name,
- int *lenp)
+ int *lenp)
{
struct property *pp = of_find_property(np, name, lenp);
@@ -226,13 +232,13 @@
/** Checks if the given "compat" string matches one of the strings in
* the device's "compatible" property
*/
-int of_device_is_compatible(const struct device_node *device,
- const char *compat)
+static int __of_device_is_compatible(const struct device_node *device,
+ const char *compat)
{
const char* cp;
int cplen, l;
- cp = of_get_property(device, "compatible", &cplen);
+ cp = __of_get_property(device, "compatible", &cplen);
if (cp == NULL)
return 0;
while (cplen > 0) {
@@ -245,6 +251,21 @@
return 0;
}
+
+/** Checks if the given "compat" string matches one of the strings in
+ * the device's "compatible" property
+ */
+int of_device_is_compatible(const struct device_node *device,
+ const char *compat)
+{
+ unsigned long flags;
+ int res;
+
+ raw_spin_lock_irqsave(&devtree_lock, flags);
+ res = __of_device_is_compatible(device, compat);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
+ return res;
+}
EXPORT_SYMBOL(of_device_is_compatible);
/**
@@ -269,19 +290,19 @@
EXPORT_SYMBOL(of_machine_is_compatible);
/**
- * of_device_is_available - check if a device is available for use
+ * __of_device_is_available - check if a device is available for use
*
- * @device: Node to check for availability
+ * @device: Node to check for availability, with locks already held
*
* Returns 1 if the status property is absent or set to "okay" or "ok",
* 0 otherwise
*/
-int of_device_is_available(const struct device_node *device)
+static int __of_device_is_available(const struct device_node *device)
{
const char *status;
int statlen;
- status = of_get_property(device, "status", &statlen);
+ status = __of_get_property(device, "status", &statlen);
if (status == NULL)
return 1;
@@ -292,6 +313,26 @@
return 0;
}
+
+/**
+ * of_device_is_available - check if a device is available for use
+ *
+ * @device: Node to check for availability
+ *
+ * Returns 1 if the status property is absent or set to "okay" or "ok",
+ * 0 otherwise
+ */
+int of_device_is_available(const struct device_node *device)
+{
+ unsigned long flags;
+ int res;
+
+ raw_spin_lock_irqsave(&devtree_lock, flags);
+ res = __of_device_is_available(device);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
+ return res;
+
+}
EXPORT_SYMBOL(of_device_is_available);
/**
@@ -304,13 +345,14 @@
struct device_node *of_get_parent(const struct device_node *node)
{
struct device_node *np;
+ unsigned long flags;
if (!node)
return NULL;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = of_node_get(node->parent);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_get_parent);
@@ -329,14 +371,15 @@
struct device_node *of_get_next_parent(struct device_node *node)
{
struct device_node *parent;
+ unsigned long flags;
if (!node)
return NULL;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
parent = of_node_get(node->parent);
of_node_put(node);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return parent;
}
@@ -352,14 +395,15 @@
struct device_node *prev)
{
struct device_node *next;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
next = prev ? prev->sibling : node->child;
for (; next; next = next->sibling)
if (of_node_get(next))
break;
of_node_put(prev);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return next;
}
EXPORT_SYMBOL(of_get_next_child);
@@ -377,16 +421,16 @@
{
struct device_node *next;
- read_lock(&devtree_lock);
+ raw_spin_lock(&devtree_lock);
next = prev ? prev->sibling : node->child;
for (; next; next = next->sibling) {
- if (!of_device_is_available(next))
+ if (!__of_device_is_available(next))
continue;
if (of_node_get(next))
break;
}
of_node_put(prev);
- read_unlock(&devtree_lock);
+ raw_spin_unlock(&devtree_lock);
return next;
}
EXPORT_SYMBOL(of_get_next_available_child);
@@ -424,14 +468,15 @@
struct device_node *of_find_node_by_path(const char *path)
{
struct device_node *np = of_allnodes;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
for (; np; np = np->allnext) {
if (np->full_name && (of_node_cmp(np->full_name, path) == 0)
&& of_node_get(np))
break;
}
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_node_by_path);
@@ -451,15 +496,16 @@
const char *name)
{
struct device_node *np;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext)
if (np->name && (of_node_cmp(np->name, name) == 0)
&& of_node_get(np))
break;
of_node_put(from);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_node_by_name);
@@ -480,15 +526,16 @@
const char *type)
{
struct device_node *np;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext)
if (np->type && (of_node_cmp(np->type, type) == 0)
&& of_node_get(np))
break;
of_node_put(from);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_node_by_type);
@@ -511,18 +558,20 @@
const char *type, const char *compatible)
{
struct device_node *np;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
if (type
&& !(np->type && (of_node_cmp(np->type, type) == 0)))
continue;
- if (of_device_is_compatible(np, compatible) && of_node_get(np))
+ if (__of_device_is_compatible(np, compatible) &&
+ of_node_get(np))
break;
}
of_node_put(from);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_compatible_node);
@@ -544,8 +593,9 @@
{
struct device_node *np;
struct property *pp;
+ unsigned long flags;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
for (pp = np->properties; pp; pp = pp->next) {
@@ -557,20 +607,14 @@
}
out:
of_node_put(from);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_node_with_property);
-/**
- * of_match_node - Tell if an device_node has a matching of_match structure
- * @matches: array of of device match structures to search in
- * @node: the of device structure to match against
- *
- * Low level utility function used by device matching.
- */
-const struct of_device_id *of_match_node(const struct of_device_id *matches,
- const struct device_node *node)
+static
+const struct of_device_id *__of_match_node(const struct of_device_id *matches,
+ const struct device_node *node)
{
if (!matches)
return NULL;
@@ -584,14 +628,33 @@
match &= node->type
&& !strcmp(matches->type, node->type);
if (matches->compatible[0])
- match &= of_device_is_compatible(node,
- matches->compatible);
+ match &= __of_device_is_compatible(node,
+ matches->compatible);
if (match)
return matches;
matches++;
}
return NULL;
}
+
+/**
+ * of_match_node - Tell if an device_node has a matching of_match structure
+ * @matches: array of of device match structures to search in
+ * @node: the of device structure to match against
+ *
+ * Low level utility function used by device matching.
+ */
+const struct of_device_id *of_match_node(const struct of_device_id *matches,
+ const struct device_node *node)
+{
+ const struct of_device_id *match;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&devtree_lock, flags);
+ match = __of_match_node(matches, node);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
+ return match;
+}
EXPORT_SYMBOL(of_match_node);
/**
@@ -612,21 +675,24 @@
const struct of_device_id **match)
{
struct device_node *np;
+ const struct of_device_id *m;
+ unsigned long flags;
if (match)
*match = NULL;
- read_lock(&devtree_lock);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
- if (of_match_node(matches, np) && of_node_get(np)) {
+ m = __of_match_node(matches, np);
+ if (m && of_node_get(np)) {
if (match)
- *match = matches;
+ *match = m;
break;
}
}
of_node_put(from);
- read_unlock(&devtree_lock);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
}
EXPORT_SYMBOL(of_find_matching_node_and_match);
@@ -669,12 +735,12 @@
{
struct device_node *np;
- read_lock(&devtree_lock);
+ raw_spin_lock(&devtree_lock);
for (np = of_allnodes; np; np = np->allnext)
if (np->phandle == handle)
break;
of_node_get(np);
- read_unlock(&devtree_lock);
+ raw_spin_unlock(&devtree_lock);
return np;
}
EXPORT_SYMBOL(of_find_node_by_phandle);
@@ -1025,12 +1091,13 @@
* To get a device_node of the `node2' node you may call this:
* of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args);
*/
-int of_parse_phandle_with_args(const struct device_node *np, const char *list_name,
- const char *cells_name, int index,
- struct of_phandle_args *out_args)
+static int __of_parse_phandle_with_args(const struct device_node *np,
+ const char *list_name,
+ const char *cells_name, int index,
+ struct of_phandle_args *out_args)
{
const __be32 *list, *list_end;
- int size, cur_index = 0;
+ int rc = 0, size, cur_index = 0;
uint32_t count = 0;
struct device_node *node = NULL;
phandle phandle;
@@ -1043,6 +1110,7 @@
/* Loop over the phandles until all the requested entry is found */
while (list < list_end) {
+ rc = -EINVAL;
count = 0;
/*
@@ -1059,13 +1127,13 @@
if (!node) {
pr_err("%s: could not find phandle\n",
np->full_name);
- break;
+ goto err;
}
if (of_property_read_u32(node, cells_name, &count)) {
pr_err("%s: could not get %s for %s\n",
np->full_name, cells_name,
node->full_name);
- break;
+ goto err;
}
/*
@@ -1075,7 +1143,7 @@
if (list + count > list_end) {
pr_err("%s: arguments longer than property\n",
np->full_name);
- break;
+ goto err;
}
}
@@ -1085,9 +1153,10 @@
* index matches, then fill the out_args structure and return,
* or return -ENOENT for an empty entry.
*/
+ rc = -ENOENT;
if (cur_index == index) {
if (!phandle)
- return -ENOENT;
+ goto err;
if (out_args) {
int i;
@@ -1098,6 +1167,10 @@
for (i = 0; i < count; i++)
out_args->args[i] = be32_to_cpup(list++);
}
+
+ /* Found it! return success */
+ if (node)
+ of_node_put(node);
return 0;
}
@@ -1107,13 +1180,51 @@
cur_index++;
}
- /* Loop exited without finding a valid entry; return an error */
+ /*
+ * Unlock node before returning result; will be one of:
+ * -ENOENT : index is for empty phandle
+ * -EINVAL : parsing error on data
+ * [1..n] : Number of phandle (count mode; when index = -1)
+ */
+ rc = index < 0 ? cur_index : -ENOENT;
+ err:
if (node)
of_node_put(node);
- return -EINVAL;
+ return rc;
+}
+
+int of_parse_phandle_with_args(const struct device_node *np, const char *list_name,
+ const char *cells_name, int index,
+ struct of_phandle_args *out_args)
+{
+ if (index < 0)
+ return -EINVAL;
+ return __of_parse_phandle_with_args(np, list_name, cells_name, index, out_args);
}
EXPORT_SYMBOL(of_parse_phandle_with_args);
+/**
+ * of_count_phandle_with_args() - Find the number of phandles references in a property
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ *
+ * Returns the number of phandle + argument tuples within a property. It
+ * is a typical pattern to encode a list of phandle and variable
+ * arguments into a single property. The number of arguments is encoded
+ * by a property in the phandle-target node. For example, a gpios
+ * property would contain a list of GPIO specifies consisting of a
+ * phandle and 1 or more arguments. The number of arguments are
+ * determined by the #gpio-cells property in the node pointed to by the
+ * phandle.
+ */
+int of_count_phandle_with_args(const struct device_node *np, const char *list_name,
+ const char *cells_name)
+{
+ return __of_parse_phandle_with_args(np, list_name, cells_name, -1, NULL);
+}
+EXPORT_SYMBOL(of_count_phandle_with_args);
+
#if defined(CONFIG_OF_DYNAMIC)
static int of_property_notify(int action, struct device_node *np,
struct property *prop)
@@ -1146,18 +1257,18 @@
return rc;
prop->next = NULL;
- write_lock_irqsave(&devtree_lock, flags);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (strcmp(prop->name, (*next)->name) == 0) {
/* duplicate ! don't insert it */
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return -1;
}
next = &(*next)->next;
}
*next = prop;
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
#ifdef CONFIG_PROC_DEVICETREE
/* try to add to proc as well if it was initialized */
@@ -1187,7 +1298,7 @@
if (rc)
return rc;
- write_lock_irqsave(&devtree_lock, flags);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (*next == prop) {
@@ -1200,7 +1311,7 @@
}
next = &(*next)->next;
}
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
if (!found)
return -ENODEV;
@@ -1240,7 +1351,7 @@
if (!oldprop)
return of_add_property(np, newprop);
- write_lock_irqsave(&devtree_lock, flags);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (*next == oldprop) {
@@ -1254,7 +1365,7 @@
}
next = &(*next)->next;
}
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
if (!found)
return -ENODEV;
@@ -1327,12 +1438,12 @@
if (rc)
return rc;
- write_lock_irqsave(&devtree_lock, flags);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
np->sibling = np->parent->child;
np->allnext = of_allnodes;
np->parent->child = np;
of_allnodes = np;
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
of_add_proc_dt_entry(np);
return 0;
@@ -1375,17 +1486,17 @@
if (rc)
return rc;
- write_lock_irqsave(&devtree_lock, flags);
+ raw_spin_lock_irqsave(&devtree_lock, flags);
if (of_node_check_flag(np, OF_DETACHED)) {
/* someone already detached it */
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return rc;
}
parent = np->parent;
if (!parent) {
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
return rc;
}
@@ -1412,7 +1523,7 @@
}
of_node_set_flag(np, OF_DETACHED);
- write_unlock_irqrestore(&devtree_lock, flags);
+ raw_spin_unlock_irqrestore(&devtree_lock, flags);
of_remove_proc_dt_entry(np);
return rc;
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 4c74e4f..f685e55 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -8,6 +8,7 @@
#include <linux/slab.h>
#include <asm/errno.h>
+#include "of_private.h"
/**
* of_match_device - Tell if a struct device matches an of_device_id list
@@ -131,6 +132,7 @@
void of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
const char *compat;
+ struct alias_prop *app;
int seen = 0, cplen, sl;
if ((!dev) || (!dev->of_node))
@@ -153,6 +155,17 @@
seen++;
}
add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen);
+
+ seen = 0;
+ mutex_lock(&of_aliases_mutex);
+ list_for_each_entry(app, &aliases_lookup, link) {
+ if (dev->of_node == app->np) {
+ add_uevent_var(env, "OF_ALIAS_%d=%s", seen,
+ app->alias);
+ seen++;
+ }
+ }
+ mutex_unlock(&of_aliases_mutex);
}
int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env)
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
new file mode 100644
index 0000000..ff350c8
--- /dev/null
+++ b/drivers/of/of_private.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_OF_PRIVATE_H
+#define _LINUX_OF_PRIVATE_H
+/*
+ * Private symbols used by OF support code
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/**
+ * struct alias_prop - Alias property in 'aliases' node
+ * @link: List node to link the structure in aliases_lookup list
+ * @alias: Alias property name
+ * @np: Pointer to device_node that the alias stands for
+ * @id: Index value from end of alias name
+ * @stem: Alias string without the index
+ *
+ * The structure represents one alias property of 'aliases' node as
+ * an entry in aliases_lookup list.
+ */
+struct alias_prop {
+ struct list_head link;
+ const char *alias;
+ struct device_node *np;
+ int id;
+ char stem[0];
+};
+
+extern struct mutex of_aliases_mutex;
+extern struct list_head aliases_lookup;
+#endif /* _LINUX_OF_PRIVATE_H */
diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c
index f24ffd7..0eb5c38 100644
--- a/drivers/of/selftest.c
+++ b/drivers/of/selftest.c
@@ -2,7 +2,7 @@
* Self tests for device tree subsystem
*/
-#define pr_fmt(fmt) "### %s(): " fmt, __func__
+#define pr_fmt(fmt) "### dt-test ### " fmt
#include <linux/clk.h>
#include <linux/err.h>
@@ -16,26 +16,30 @@
static bool selftest_passed = true;
#define selftest(result, fmt, ...) { \
- selftest_passed &= (result); \
- if (!(result)) \
+ if (!(result)) { \
pr_err("FAIL %s:%i " fmt, __FILE__, __LINE__, ##__VA_ARGS__); \
+ selftest_passed = false; \
+ } else { \
+ pr_info("pass %s:%i\n", __FILE__, __LINE__); \
+ } \
}
static void __init of_selftest_parse_phandle_with_args(void)
{
struct device_node *np;
struct of_phandle_args args;
- int rc, i;
- bool passed_all = true;
+ int i, rc;
- pr_info("start\n");
np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a");
if (!np) {
pr_err("missing testcase data\n");
return;
}
- for (i = 0; i < 7; i++) {
+ rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells");
+ selftest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc);
+
+ for (i = 0; i < 8; i++) {
bool passed = true;
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells", i, &args);
@@ -79,45 +83,47 @@
passed &= (args.args[0] == (i + 1));
break;
case 7:
- passed &= (rc == -EINVAL);
+ passed &= (rc == -ENOENT);
break;
default:
passed = false;
}
- if (!passed) {
- int j;
- pr_err("index %i - data error on node %s rc=%i regs=[",
- i, args.np->full_name, rc);
- for (j = 0; j < args.args_count; j++)
- printk(" %i", args.args[j]);
- printk(" ]\n");
-
- passed_all = false;
- }
+ selftest(passed, "index %i - data error on node %s rc=%i\n",
+ i, args.np->full_name, rc);
}
/* Check for missing list property */
rc = of_parse_phandle_with_args(np, "phandle-list-missing",
"#phandle-cells", 0, &args);
- passed_all &= (rc == -EINVAL);
+ selftest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
+ rc = of_count_phandle_with_args(np, "phandle-list-missing",
+ "#phandle-cells");
+ selftest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
/* Check for missing cells property */
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells-missing", 0, &args);
- passed_all &= (rc == -EINVAL);
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+ rc = of_count_phandle_with_args(np, "phandle-list",
+ "#phandle-cells-missing");
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for bad phandle in list */
rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle",
"#phandle-cells", 0, &args);
- passed_all &= (rc == -EINVAL);
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+ rc = of_count_phandle_with_args(np, "phandle-list-bad-phandle",
+ "#phandle-cells");
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for incorrectly formed argument list */
rc = of_parse_phandle_with_args(np, "phandle-list-bad-args",
"#phandle-cells", 1, &args);
- passed_all &= (rc == -EINVAL);
-
- pr_info("end - %s\n", passed_all ? "PASS" : "FAIL");
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+ rc = of_count_phandle_with_args(np, "phandle-list-bad-args",
+ "#phandle-cells");
+ selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
}
static void __init of_selftest_property_match_string(void)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 3d6d4fd..a951c22 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -734,34 +734,24 @@
*/
static int acpiphp_bus_add(struct acpiphp_func *func)
{
- acpi_handle phandle;
- struct acpi_device *device, *pdevice;
+ struct acpi_device *device;
int ret_val;
- acpi_get_parent(func->handle, &phandle);
- if (acpi_bus_get_device(phandle, &pdevice)) {
- dbg("no parent device, assuming NULL\n");
- pdevice = NULL;
- }
if (!acpi_bus_get_device(func->handle, &device)) {
dbg("bus exists... trim\n");
/* this shouldn't be in here, so remove
* the bus then re-add it...
*/
- ret_val = acpi_bus_trim(device, 1);
- dbg("acpi_bus_trim return %x\n", ret_val);
+ acpi_bus_trim(device);
}
- ret_val = acpi_bus_add(&device, pdevice, func->handle,
- ACPI_BUS_TYPE_DEVICE);
- if (ret_val) {
- dbg("error adding bus, %x\n",
- -ret_val);
- goto acpiphp_bus_add_out;
- }
- ret_val = acpi_bus_start(device);
+ ret_val = acpi_bus_scan(func->handle);
+ if (!ret_val)
+ ret_val = acpi_bus_get_device(func->handle, &device);
-acpiphp_bus_add_out:
+ if (ret_val)
+ dbg("error adding bus, %x\n", -ret_val);
+
return ret_val;
}
@@ -781,11 +771,8 @@
return retval;
}
- retval = acpi_bus_trim(device, 1);
- if (retval)
- err("cannot remove from acpi list\n");
-
- return retval;
+ acpi_bus_trim(device);
+ return 0;
}
static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
@@ -1130,8 +1117,7 @@
static void handle_bridge_insertion(acpi_handle handle, u32 type)
{
- struct acpi_device *device, *pdevice;
- acpi_handle phandle;
+ struct acpi_device *device;
if ((type != ACPI_NOTIFY_BUS_CHECK) &&
(type != ACPI_NOTIFY_DEVICE_CHECK)) {
@@ -1139,17 +1125,15 @@
return;
}
- acpi_get_parent(handle, &phandle);
- if (acpi_bus_get_device(phandle, &pdevice)) {
- dbg("no parent device, assuming NULL\n");
- pdevice = NULL;
- }
- if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) {
+ if (acpi_bus_scan(handle)) {
err("cannot add bridge to acpi list\n");
return;
}
- if (!acpiphp_configure_bridge(handle) &&
- !acpi_bus_start(device))
+ if (acpi_bus_get_device(handle, &device)) {
+ err("ACPI device object missing\n");
+ return;
+ }
+ if (!acpiphp_configure_bridge(handle))
add_bridge(handle);
else
err("cannot configure and start bridge\n");
@@ -1234,6 +1218,8 @@
handle = hp_work->handle;
type = hp_work->type;
+ acpi_scan_lock_acquire();
+
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
handle_bridge_insertion(handle, type);
@@ -1311,6 +1297,7 @@
}
out:
+ acpi_scan_lock_release();
kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
}
@@ -1357,6 +1344,8 @@
func = (struct acpiphp_func *)context;
+ acpi_scan_lock_acquire();
+
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
/* bus re-enumerate */
@@ -1387,6 +1376,7 @@
break;
}
+ acpi_scan_lock_release();
kfree(hp_work); /* allocated in handle_hotplug_event_func */
}
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index f64ca92..574421b 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -412,7 +412,6 @@
if (SN_ACPI_BASE_SUPPORT() && ssdt) {
unsigned long long adr;
struct acpi_device *pdevice;
- struct acpi_device *device;
acpi_handle phandle;
acpi_handle chandle = NULL;
acpi_handle rethandle;
@@ -426,6 +425,7 @@
pdevice = NULL;
}
+ acpi_scan_lock_acquire();
/*
* Walk the rootbus node's immediate children looking for
* the slot's device node(s). There can be more than
@@ -448,20 +448,18 @@
if (ACPI_SUCCESS(ret) &&
(adr>>16) == (slot->device_num + 1)) {
- ret = acpi_bus_add(&device, pdevice, chandle,
- ACPI_BUS_TYPE_DEVICE);
+ ret = acpi_bus_scan(chandle);
if (ACPI_FAILURE(ret)) {
- printk(KERN_ERR "%s: acpi_bus_add "
+ printk(KERN_ERR "%s: acpi_bus_scan "
"failed (0x%x) for slot %d "
"func %d\n", __func__,
ret, (int)(adr>>16),
(int)(adr&0xffff));
/* try to continue on */
- } else {
- acpi_bus_start(device);
}
}
}
+ acpi_scan_lock_release();
}
/* Call the driver for the new device */
@@ -512,6 +510,7 @@
/* Get the rootbus node pointer */
phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
+ acpi_scan_lock_acquire();
/*
* Walk the rootbus node's immediate children looking for
* the slot's device node(s). There can be more than
@@ -539,10 +538,10 @@
ret = acpi_bus_get_device(chandle,
&device);
if (ACPI_SUCCESS(ret))
- acpi_bus_trim(device, 1);
+ acpi_bus_trim(device);
}
}
-
+ acpi_scan_lock_release();
}
/* Free the SN resources assigned to the Linux device.*/
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5099636..00cc78c7 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -845,6 +845,32 @@
}
EXPORT_SYMBOL(pci_enable_msi_block);
+int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
+{
+ int ret, pos, nvec;
+ u16 msgctl;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
+ ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+
+ if (maxvec)
+ *maxvec = ret;
+
+ do {
+ nvec = ret;
+ ret = pci_enable_msi_block(dev, nvec);
+ } while (ret > 0);
+
+ if (ret < 0)
+ return ret;
+ return nvec;
+}
+EXPORT_SYMBOL(pci_enable_msi_block_auto);
+
void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 1af4008..e407c61 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -283,7 +283,6 @@
.is_manageable = acpi_pci_power_manageable,
.set_state = acpi_pci_set_power_state,
.choose_state = acpi_pci_choose_state,
- .can_wakeup = acpi_pci_can_wakeup,
.sleep_wake = acpi_pci_sleep_wake,
.run_wake = acpi_pci_run_wake,
};
@@ -321,10 +320,65 @@
return 0;
}
+static void pci_acpi_setup(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+ acpi_status status;
+ acpi_handle dummy;
+
+ /*
+ * Evaluate and parse _PRT, if exists. This code allows parsing of
+ * _PRT objects within the scope of non-bridge devices. Note that
+ * _PRTs within the scope of a PCI bridge assume the bridge's
+ * subordinate bus number.
+ *
+ * TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
+ */
+ status = acpi_get_handle(handle, METHOD_NAME__PRT, &dummy);
+ if (ACPI_SUCCESS(status)) {
+ unsigned char bus;
+
+ bus = pci_dev->subordinate ?
+ pci_dev->subordinate->number : pci_dev->bus->number;
+ acpi_pci_irq_add_prt(handle, pci_domain_nr(pci_dev->bus), bus);
+ }
+
+ if (acpi_bus_get_device(handle, &adev) || !adev->wakeup.flags.valid)
+ return;
+
+ device_set_wakeup_capable(dev, true);
+ acpi_pci_sleep_wake(pci_dev, false);
+
+ pci_acpi_add_pm_notifier(adev, pci_dev);
+ if (adev->wakeup.flags.run_wake)
+ device_set_run_wake(dev, true);
+}
+
+static void pci_acpi_cleanup(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ if (!acpi_bus_get_device(handle, &adev) && adev->wakeup.flags.valid) {
+ device_set_wakeup_capable(dev, false);
+ device_set_run_wake(dev, false);
+ pci_acpi_remove_pm_notifier(adev);
+ }
+
+ if (pci_dev->subordinate)
+ acpi_pci_irq_del_prt(pci_domain_nr(pci_dev->bus),
+ pci_dev->subordinate->number);
+}
+
static struct acpi_bus_type acpi_pci_bus = {
.bus = &pci_bus_type,
.find_device = acpi_pci_find_device,
.find_bridge = acpi_pci_find_root_bridge,
+ .setup = pci_acpi_setup,
+ .cleanup = pci_acpi_cleanup,
};
static int __init acpi_pci_init(void)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5cb5820..0c4f641 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -450,7 +450,7 @@
int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
{
if (!ops->is_manageable || !ops->set_state || !ops->choose_state
- || !ops->sleep_wake || !ops->can_wakeup)
+ || !ops->sleep_wake)
return -EINVAL;
pci_platform_pm = ops;
return 0;
@@ -473,11 +473,6 @@
pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
}
-static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
-{
- return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
-}
-
static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
{
return pci_platform_pm ?
@@ -1985,25 +1980,6 @@
}
}
-/**
- * platform_pci_wakeup_init - init platform wakeup if present
- * @dev: PCI device
- *
- * Some devices don't have PCI PM caps but can still generate wakeup
- * events through platform methods (like ACPI events). If @dev supports
- * platform wakeup events, set the device flag to indicate as much. This
- * may be redundant if the device also supports PCI PM caps, but double
- * initialization should be safe in that case.
- */
-void platform_pci_wakeup_init(struct pci_dev *dev)
-{
- if (!platform_pci_can_wakeup(dev))
- return;
-
- device_set_wakeup_capable(&dev->dev, true);
- platform_pci_sleep_wake(dev, false);
-}
-
static void pci_add_saved_cap(struct pci_dev *pci_dev,
struct pci_cap_saved_state *new_cap)
{
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e851829..adfd172 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -43,9 +43,6 @@
* platform; to be used during system-wide transitions from a
* sleeping state to the working state and vice versa
*
- * @can_wakeup: returns 'true' if given device is capable of waking up the
- * system from a sleeping state
- *
* @sleep_wake: enables/disables the system wake up capability of given device
*
* @run_wake: enables/disables the platform to generate run-time wake-up events
@@ -59,7 +56,6 @@
bool (*is_manageable)(struct pci_dev *dev);
int (*set_state)(struct pci_dev *dev, pci_power_t state);
pci_power_t (*choose_state)(struct pci_dev *dev);
- bool (*can_wakeup)(struct pci_dev *dev);
int (*sleep_wake)(struct pci_dev *dev, bool enable);
int (*run_wake)(struct pci_dev *dev, bool enable);
};
@@ -74,7 +70,6 @@
extern void pci_config_pm_runtime_get(struct pci_dev *dev);
extern void pci_config_pm_runtime_put(struct pci_dev *dev);
extern void pci_pm_init(struct pci_dev *dev);
-extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
void pci_free_cap_save_buffers(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
index 3ea5173..5ab1425 100644
--- a/drivers/pci/pcie/aer/aerdrv_errprint.c
+++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
@@ -23,6 +23,9 @@
#include "aerdrv.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/ras.h>
+
#define AER_AGENT_RECEIVER 0
#define AER_AGENT_REQUESTER 1
#define AER_AGENT_COMPLETER 2
@@ -121,12 +124,11 @@
"Transmitter ID"
};
-static void __aer_print_error(const char *prefix,
+static void __aer_print_error(struct pci_dev *dev,
struct aer_err_info *info)
{
int i, status;
const char *errmsg = NULL;
-
status = (info->status & ~info->mask);
for (i = 0; i < 32; i++) {
@@ -141,26 +143,22 @@
aer_uncorrectable_error_string[i] : NULL;
if (errmsg)
- printk("%s"" [%2d] %-22s%s\n", prefix, i, errmsg,
+ dev_err(&dev->dev, " [%2d] %-22s%s\n", i, errmsg,
info->first_error == i ? " (First)" : "");
else
- printk("%s"" [%2d] Unknown Error Bit%s\n", prefix, i,
- info->first_error == i ? " (First)" : "");
+ dev_err(&dev->dev, " [%2d] Unknown Error Bit%s\n",
+ i, info->first_error == i ? " (First)" : "");
}
}
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
{
int id = ((dev->bus->number << 8) | dev->devfn);
- char prefix[44];
-
- snprintf(prefix, sizeof(prefix), "%s%s %s: ",
- (info->severity == AER_CORRECTABLE) ? KERN_WARNING : KERN_ERR,
- dev_driver_string(&dev->dev), dev_name(&dev->dev));
if (info->status == 0) {
- printk("%s""PCIe Bus Error: severity=%s, type=Unaccessible, "
- "id=%04x(Unregistered Agent ID)\n", prefix,
+ dev_err(&dev->dev,
+ "PCIe Bus Error: severity=%s, type=Unaccessible, "
+ "id=%04x(Unregistered Agent ID)\n",
aer_error_severity_string[info->severity], id);
} else {
int layer, agent;
@@ -168,22 +166,24 @@
layer = AER_GET_LAYER_ERROR(info->severity, info->status);
agent = AER_GET_AGENT(info->severity, info->status);
- printk("%s""PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
- prefix, aer_error_severity_string[info->severity],
+ dev_err(&dev->dev,
+ "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
+ aer_error_severity_string[info->severity],
aer_error_layer[layer], id, aer_agent_string[agent]);
- printk("%s"" device [%04x:%04x] error status/mask=%08x/%08x\n",
- prefix, dev->vendor, dev->device,
+ dev_err(&dev->dev,
+ " device [%04x:%04x] error status/mask=%08x/%08x\n",
+ dev->vendor, dev->device,
info->status, info->mask);
- __aer_print_error(prefix, info);
+ __aer_print_error(dev, info);
if (info->tlp_header_valid) {
unsigned char *tlp = (unsigned char *) &info->tlp;
- printk("%s"" TLP Header:"
+ dev_err(&dev->dev, " TLP Header:"
" %02x%02x%02x%02x %02x%02x%02x%02x"
" %02x%02x%02x%02x %02x%02x%02x%02x\n",
- prefix, *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
+ *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
*(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
*(tlp + 11), *(tlp + 10), *(tlp + 9),
*(tlp + 8), *(tlp + 15), *(tlp + 14),
@@ -192,8 +192,11 @@
}
if (info->id && info->error_dev_num > 1 && info->id == id)
- printk("%s"" Error of this Agent(%04x) is reported first\n",
- prefix, id);
+ dev_err(&dev->dev,
+ " Error of this Agent(%04x) is reported first\n",
+ id);
+ trace_aer_event(dev_name(&dev->dev), (info->status & ~info->mask),
+ info->severity);
}
void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
@@ -217,7 +220,7 @@
}
EXPORT_SYMBOL_GPL(cper_severity_to_aer);
-void cper_print_aer(const char *prefix, int cper_severity,
+void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity,
struct aer_capability_regs *aer)
{
int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0;
@@ -239,25 +242,27 @@
}
layer = AER_GET_LAYER_ERROR(aer_severity, status);
agent = AER_GET_AGENT(aer_severity, status);
- printk("%s""aer_status: 0x%08x, aer_mask: 0x%08x\n",
- prefix, status, mask);
+ dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n",
+ status, mask);
cper_print_bits(prefix, status, status_strs, status_strs_size);
- printk("%s""aer_layer=%s, aer_agent=%s\n", prefix,
+ dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n",
aer_error_layer[layer], aer_agent_string[agent]);
if (aer_severity != AER_CORRECTABLE)
- printk("%s""aer_uncor_severity: 0x%08x\n",
- prefix, aer->uncor_severity);
+ dev_err(&dev->dev, "aer_uncor_severity: 0x%08x\n",
+ aer->uncor_severity);
if (tlp_header_valid) {
const unsigned char *tlp;
tlp = (const unsigned char *)&aer->header_log;
- printk("%s""aer_tlp_header:"
+ dev_err(&dev->dev, "aer_tlp_header:"
" %02x%02x%02x%02x %02x%02x%02x%02x"
" %02x%02x%02x%02x %02x%02x%02x%02x\n",
- prefix, *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
+ *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
*(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
*(tlp + 11), *(tlp + 10), *(tlp + 9),
*(tlp + 8), *(tlp + 15), *(tlp + 14),
*(tlp + 13), *(tlp + 12));
}
+ trace_aer_event(dev_name(&dev->dev), (status & ~mask),
+ aer_severity);
}
#endif
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6186f03..2dcd22d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1280,7 +1280,6 @@
/* Power Management */
pci_pm_init(dev);
- platform_pci_wakeup_init(dev);
/* Vital Product Data */
pci_vpd_pci22_init(dev);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 7c0fd92..84954a7 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -19,6 +19,8 @@
static void pci_stop_dev(struct pci_dev *dev)
{
+ pci_pme_active(dev, false);
+
if (dev->is_added) {
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index a5f3c8c..393b0ec 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -26,6 +26,29 @@
help
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
+config PINCTRL_ABX500
+ bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
+ depends on AB8500_CORE
+ select GENERIC_PINCONF
+ help
+ Select this to enable the ABx500 family IC GPIO driver
+
+config PINCTRL_AB8500
+ bool "AB8500 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8540
+ bool "AB8540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB9540
+ bool "AB9540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8505
+ bool "AB8505 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
@@ -151,6 +174,11 @@
depends on ARCH_SIRF
select PINMUX
+config PINCTRL_SUNXI
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+
config PINCTRL_TEGRA
bool
select PINMUX
@@ -164,6 +192,10 @@
bool
select PINCTRL_TEGRA
+config PINCTRL_TEGRA114
+ bool
+ select PINCTRL_TEGRA
+
config PINCTRL_U300
bool "U300 pin controller driver"
depends on ARCH_U300
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 6e87e52..0fd5f57 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,6 +9,11 @@
obj-$(CONFIG_PINCTRL) += devicetree.o
endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
+obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
+obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
+obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
@@ -30,9 +35,11 @@
obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o
+obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o
obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o
obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
+obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 59f5a96..b0de6e7 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -14,6 +14,7 @@
#define pr_fmt(fmt) "pinctrl core: " fmt
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/device.h>
@@ -31,17 +32,6 @@
#include "pinmux.h"
#include "pinconf.h"
-/**
- * struct pinctrl_maps - a list item containing part of the mapping table
- * @node: mapping table list node
- * @maps: array of mapping table entries
- * @num_maps: the number of entries in @maps
- */
-struct pinctrl_maps {
- struct list_head node;
- struct pinctrl_map const *maps;
- unsigned num_maps;
-};
static bool pinctrl_dummy_state;
@@ -55,13 +45,8 @@
static LIST_HEAD(pinctrl_list);
/* List of pinctrl maps (struct pinctrl_maps) */
-static LIST_HEAD(pinctrl_maps);
+LIST_HEAD(pinctrl_maps);
-#define for_each_maps(_maps_node_, _i_, _map_) \
- list_for_each_entry(_maps_node_, &pinctrl_maps, node) \
- for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \
- _i_ < _maps_node_->num_maps; \
- _i_++, _map_ = &_maps_node_->maps[_i_])
/**
* pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support
@@ -83,6 +68,12 @@
}
EXPORT_SYMBOL_GPL(pinctrl_dev_get_name);
+const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev)
+{
+ return dev_name(pctldev->dev);
+}
+EXPORT_SYMBOL_GPL(pinctrl_dev_get_devname);
+
void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev)
{
return pctldev->driver_data;
@@ -609,13 +600,16 @@
setting->pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name);
if (setting->pctldev == NULL) {
- dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe",
- map->ctrl_dev_name);
kfree(setting);
+ /* Do not defer probing of hogs (circular loop) */
+ if (!strcmp(map->ctrl_dev_name, map->dev_name))
+ return -ENODEV;
/*
* OK let us guess that the driver is not there yet, and
* let's defer obtaining this pinctrl handle to later...
*/
+ dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe",
+ map->ctrl_dev_name);
return -EPROBE_DEFER;
}
@@ -694,11 +688,31 @@
continue;
ret = add_setting(p, map);
- if (ret < 0) {
+ /*
+ * At this point the adding of a setting may:
+ *
+ * - Defer, if the pinctrl device is not yet available
+ * - Fail, if the pinctrl device is not yet available,
+ * AND the setting is a hog. We cannot defer that, since
+ * the hog will kick in immediately after the device
+ * is registered.
+ *
+ * If the error returned was not -EPROBE_DEFER then we
+ * accumulate the errors to see if we end up with
+ * an -EPROBE_DEFER later, as that is the worst case.
+ */
+ if (ret == -EPROBE_DEFER) {
pinctrl_put_locked(p, false);
return ERR_PTR(ret);
}
}
+ if (ret < 0) {
+ /* If some other error than deferral occured, return here */
+ pinctrl_put_locked(p, false);
+ return ERR_PTR(ret);
+ }
+
+ kref_init(&p->users);
/* Add the pinctrl handle to the global list */
list_add_tail(&p->node, &pinctrl_list);
@@ -713,9 +727,17 @@
if (WARN_ON(!dev))
return ERR_PTR(-EINVAL);
+ /*
+ * See if somebody else (such as the device core) has already
+ * obtained a handle to the pinctrl for this device. In that case,
+ * return another pointer to it.
+ */
p = find_pinctrl(dev);
- if (p != NULL)
- return ERR_PTR(-EBUSY);
+ if (p != NULL) {
+ dev_dbg(dev, "obtain a copy of previously claimed pinctrl\n");
+ kref_get(&p->users);
+ return p;
+ }
return create_pinctrl(dev);
}
@@ -771,13 +793,24 @@
}
/**
- * pinctrl_put() - release a previously claimed pinctrl handle
+ * pinctrl_release() - release the pinctrl handle
+ * @kref: the kref in the pinctrl being released
+ */
+static void pinctrl_release(struct kref *kref)
+{
+ struct pinctrl *p = container_of(kref, struct pinctrl, users);
+
+ pinctrl_put_locked(p, true);
+}
+
+/**
+ * pinctrl_put() - decrease use count on a previously claimed pinctrl handle
* @p: the pinctrl handle to release
*/
void pinctrl_put(struct pinctrl *p)
{
mutex_lock(&pinctrl_mutex);
- pinctrl_put_locked(p, true);
+ kref_put(&p->users, pinctrl_release);
mutex_unlock(&pinctrl_mutex);
}
EXPORT_SYMBOL_GPL(pinctrl_put);
@@ -1055,6 +1088,30 @@
}
}
+/**
+ * pinctrl_force_sleep() - turn a given controller device into sleep state
+ * @pctldev: pin controller device
+ */
+int pinctrl_force_sleep(struct pinctrl_dev *pctldev)
+{
+ if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep))
+ return pinctrl_select_state(pctldev->p, pctldev->hog_sleep);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
+
+/**
+ * pinctrl_force_default() - turn a given controller device into default state
+ * @pctldev: pin controller device
+ */
+int pinctrl_force_default(struct pinctrl_dev *pctldev)
+{
+ if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default))
+ return pinctrl_select_state(pctldev->p, pctldev->hog_default);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pinctrl_force_default);
+
#ifdef CONFIG_DEBUG_FS
static int pinctrl_pins_show(struct seq_file *s, void *what)
@@ -1500,16 +1557,23 @@
pctldev->p = pinctrl_get_locked(pctldev->dev);
if (!IS_ERR(pctldev->p)) {
- struct pinctrl_state *s =
+ pctldev->hog_default =
pinctrl_lookup_state_locked(pctldev->p,
PINCTRL_STATE_DEFAULT);
- if (IS_ERR(s)) {
+ if (IS_ERR(pctldev->hog_default)) {
dev_dbg(dev, "failed to lookup the default state\n");
} else {
- if (pinctrl_select_state_locked(pctldev->p, s))
+ if (pinctrl_select_state_locked(pctldev->p,
+ pctldev->hog_default))
dev_err(dev,
"failed to select default state\n");
}
+
+ pctldev->hog_sleep =
+ pinctrl_lookup_state_locked(pctldev->p,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(pctldev->hog_sleep))
+ dev_dbg(dev, "failed to lookup the sleep state\n");
}
mutex_unlock(&pinctrl_mutex);
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 12f5694..ee72f1f 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -9,6 +9,7 @@
* License terms: GNU General Public License (GPL) version 2
*/
+#include <linux/kref.h>
#include <linux/mutex.h>
#include <linux/radix-tree.h>
#include <linux/pinctrl/pinconf.h>
@@ -30,6 +31,8 @@
* @driver_data: driver data for drivers registering to the pin controller
* subsystem
* @p: result of pinctrl_get() for this device
+ * @hog_default: default state for pins hogged by this device
+ * @hog_sleep: sleep state for pins hogged by this device
* @device_root: debugfs root for this device
*/
struct pinctrl_dev {
@@ -41,6 +44,8 @@
struct module *owner;
void *driver_data;
struct pinctrl *p;
+ struct pinctrl_state *hog_default;
+ struct pinctrl_state *hog_sleep;
#ifdef CONFIG_DEBUG_FS
struct dentry *device_root;
#endif
@@ -54,6 +59,7 @@
* @state: the current state
* @dt_maps: the mapping table chunks dynamically parsed from device tree for
* this device, if any
+ * @users: reference count
*/
struct pinctrl {
struct list_head node;
@@ -61,6 +67,7 @@
struct list_head states;
struct pinctrl_state *state;
struct list_head dt_maps;
+ struct kref users;
};
/**
@@ -148,6 +155,18 @@
#endif
};
+/**
+ * struct pinctrl_maps - a list item containing part of the mapping table
+ * @node: mapping table list node
+ * @maps: array of mapping table entries
+ * @num_maps: the number of entries in @maps
+ */
+struct pinctrl_maps {
+ struct list_head node;
+ struct pinctrl_map const *maps;
+ unsigned num_maps;
+};
+
struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name);
int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin);
@@ -164,5 +183,15 @@
bool dup, bool locked);
void pinctrl_unregister_map(struct pinctrl_map const *map);
+extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev);
+extern int pinctrl_force_default(struct pinctrl_dev *pctldev);
+
extern struct mutex pinctrl_mutex;
extern struct list_head pinctrldev_list;
+extern struct list_head pinctrl_maps;
+
+#define for_each_maps(_maps_node_, _i_, _map_) \
+ list_for_each_entry(_maps_node_, &pinctrl_maps, node) \
+ for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \
+ _i_ < _maps_node_->num_maps; \
+ _i_++, _map_ = &_maps_node_->maps[_i_])
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index fe2d1af..fd40a11 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -141,6 +141,11 @@
pctldev = find_pinctrl_by_of_node(np_pctldev);
if (pctldev)
break;
+ /* Do not defer probing of hogs (circular loop) */
+ if (np_pctldev == p->dev->of_node) {
+ of_node_put(np_pctldev);
+ return -ENODEV;
+ }
}
of_node_put(np_pctldev);
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 833a364..06c304a 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -41,11 +41,13 @@
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
- PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_DISABLE, "input schmitt disabled", NULL),
+ PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
+ PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL),
PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"),
+ PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level"),
};
void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index baee2cc..ac8d382 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -574,6 +574,207 @@
.release = single_release,
};
+/* 32bit read/write ressources */
+#define MAX_NAME_LEN 16
+char dbg_pinname[MAX_NAME_LEN]; /* shared: name of the state of the pin*/
+char dbg_state_name[MAX_NAME_LEN]; /* shared: state of the pin*/
+static u32 dbg_config; /* shared: config to be read/set for the pin & state*/
+
+static int pinconf_dbg_pinname_print(struct seq_file *s, void *d)
+{
+ if (strlen(dbg_pinname))
+ seq_printf(s, "%s\n", dbg_pinname);
+ else
+ seq_printf(s, "No pin name set\n");
+ return 0;
+}
+
+static int pinconf_dbg_pinname_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pinconf_dbg_pinname_print, inode->i_private);
+}
+
+static int pinconf_dbg_pinname_write(struct file *file,
+ const char __user *user_buf, size_t count, loff_t *ppos)
+{
+ int err;
+
+ if (count > MAX_NAME_LEN)
+ return -EINVAL;
+
+ err = sscanf(user_buf, "%15s", dbg_pinname);
+
+ if (err != 1)
+ return -EINVAL;
+
+ return count;
+}
+
+static const struct file_operations pinconf_dbg_pinname_fops = {
+ .open = pinconf_dbg_pinname_open,
+ .write = pinconf_dbg_pinname_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int pinconf_dbg_state_print(struct seq_file *s, void *d)
+{
+ if (strlen(dbg_state_name))
+ seq_printf(s, "%s\n", dbg_pinname);
+ else
+ seq_printf(s, "No pin state set\n");
+ return 0;
+}
+
+static int pinconf_dbg_state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pinconf_dbg_state_print, inode->i_private);
+}
+
+static int pinconf_dbg_state_write(struct file *file,
+ const char __user *user_buf, size_t count, loff_t *ppos)
+{
+ int err;
+
+ if (count > MAX_NAME_LEN)
+ return -EINVAL;
+
+ err = sscanf(user_buf, "%15s", dbg_state_name);
+
+ if (err != 1)
+ return -EINVAL;
+
+ return count;
+}
+
+static const struct file_operations pinconf_dbg_pinstate_fops = {
+ .open = pinconf_dbg_state_open,
+ .write = pinconf_dbg_state_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+/**
+ * pinconf_dbg_config_print() - display the pinctrl config from the pinctrl
+ * map, of a pin/state pair based on pinname and state that have been
+ * selected with the debugfs entries pinconf-name and pinconf-state
+ * @s: contains the 32bits config to be written
+ * @d: not used
+ */
+static int pinconf_dbg_config_print(struct seq_file *s, void *d)
+{
+ struct pinctrl_maps *maps_node;
+ struct pinctrl_map const *map;
+ struct pinctrl_dev *pctldev = NULL;
+ struct pinconf_ops *confops = NULL;
+ int i, j;
+ bool found = false;
+
+ mutex_lock(&pinctrl_mutex);
+
+ /* Parse the pinctrl map and look for the elected pin/state */
+ for_each_maps(maps_node, i, map) {
+ if (map->type != PIN_MAP_TYPE_CONFIGS_PIN)
+ continue;
+
+ if (strncmp(map->name, dbg_state_name, MAX_NAME_LEN) > 0)
+ continue;
+
+ for (j = 0; j < map->data.configs.num_configs; j++) {
+ if (0 == strncmp(map->data.configs.group_or_pin,
+ dbg_pinname, MAX_NAME_LEN)) {
+ /* We found the right pin / state, read the
+ * config and store the pctldev */
+ dbg_config = map->data.configs.configs[j];
+ pctldev = get_pinctrl_dev_from_devname
+ (map->ctrl_dev_name);
+ found = true;
+ break;
+ }
+ }
+ }
+
+ mutex_unlock(&pinctrl_mutex);
+
+ if (found) {
+ seq_printf(s, "Config of %s in state %s: 0x%08X\n", dbg_pinname,
+ dbg_state_name, dbg_config);
+
+ if (pctldev)
+ confops = pctldev->desc->confops;
+
+ if (confops && confops->pin_config_config_dbg_show)
+ confops->pin_config_config_dbg_show(pctldev,
+ s, dbg_config);
+ } else {
+ seq_printf(s, "No pin found for defined name/state\n");
+ }
+
+ return 0;
+}
+
+static int pinconf_dbg_config_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pinconf_dbg_config_print, inode->i_private);
+}
+
+/**
+ * pinconf_dbg_config_write() - overwrite the pinctrl config in thepinctrl
+ * map, of a pin/state pair based on pinname and state that have been
+ * selected with the debugfs entries pinconf-name and pinconf-state
+ */
+static int pinconf_dbg_config_write(struct file *file,
+ const char __user *user_buf, size_t count, loff_t *ppos)
+{
+ int err;
+ unsigned long config;
+ struct pinctrl_maps *maps_node;
+ struct pinctrl_map const *map;
+ int i, j;
+
+ err = kstrtoul_from_user(user_buf, count, 0, &config);
+
+ if (err)
+ return err;
+
+ dbg_config = config;
+
+ mutex_lock(&pinctrl_mutex);
+
+ /* Parse the pinctrl map and look for the selected pin/state */
+ for_each_maps(maps_node, i, map) {
+ if (map->type != PIN_MAP_TYPE_CONFIGS_PIN)
+ continue;
+
+ if (strncmp(map->name, dbg_state_name, MAX_NAME_LEN) > 0)
+ continue;
+
+ /* we found the right pin / state, so overwrite config */
+ for (j = 0; j < map->data.configs.num_configs; j++) {
+ if (strncmp(map->data.configs.group_or_pin, dbg_pinname,
+ MAX_NAME_LEN) == 0)
+ map->data.configs.configs[j] = dbg_config;
+ }
+ }
+
+ mutex_unlock(&pinctrl_mutex);
+
+ return count;
+}
+
+static const struct file_operations pinconf_dbg_pinconfig_fops = {
+ .open = pinconf_dbg_config_open,
+ .write = pinconf_dbg_config_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
void pinconf_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev)
{
@@ -581,6 +782,12 @@
devroot, pctldev, &pinconf_pins_ops);
debugfs_create_file("pinconf-groups", S_IFREG | S_IRUGO,
devroot, pctldev, &pinconf_groups_ops);
+ debugfs_create_file("pinconf-name", (S_IRUGO | S_IWUSR | S_IWGRP),
+ devroot, pctldev, &pinconf_dbg_pinname_fops);
+ debugfs_create_file("pinconf-state", (S_IRUGO | S_IWUSR | S_IWGRP),
+ devroot, pctldev, &pinconf_dbg_pinstate_fops);
+ debugfs_create_file("pinconf-config", (S_IRUGO | S_IWUSR | S_IWGRP),
+ devroot, pctldev, &pinconf_dbg_pinconfig_fops);
}
#endif
diff --git a/drivers/pinctrl/pinctrl-ab8500.c b/drivers/pinctrl/pinctrl-ab8500.c
new file mode 100644
index 0000000..3b471d8
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8500.c
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8500_PIN_T10 ABX500_GPIO(1)
+#define AB8500_PIN_T9 ABX500_GPIO(2)
+#define AB8500_PIN_U9 ABX500_GPIO(3)
+#define AB8500_PIN_W2 ABX500_GPIO(4)
+/* hole */
+#define AB8500_PIN_Y18 ABX500_GPIO(6)
+#define AB8500_PIN_AA20 ABX500_GPIO(7)
+#define AB8500_PIN_W18 ABX500_GPIO(8)
+#define AB8500_PIN_AA19 ABX500_GPIO(9)
+#define AB8500_PIN_U17 ABX500_GPIO(10)
+#define AB8500_PIN_AA18 ABX500_GPIO(11)
+#define AB8500_PIN_U16 ABX500_GPIO(12)
+#define AB8500_PIN_W17 ABX500_GPIO(13)
+#define AB8500_PIN_F14 ABX500_GPIO(14)
+#define AB8500_PIN_B17 ABX500_GPIO(15)
+#define AB8500_PIN_F15 ABX500_GPIO(16)
+#define AB8500_PIN_P5 ABX500_GPIO(17)
+#define AB8500_PIN_R5 ABX500_GPIO(18)
+#define AB8500_PIN_U5 ABX500_GPIO(19)
+#define AB8500_PIN_T5 ABX500_GPIO(20)
+#define AB8500_PIN_H19 ABX500_GPIO(21)
+#define AB8500_PIN_G20 ABX500_GPIO(22)
+#define AB8500_PIN_G19 ABX500_GPIO(23)
+#define AB8500_PIN_T14 ABX500_GPIO(24)
+#define AB8500_PIN_R16 ABX500_GPIO(25)
+#define AB8500_PIN_M16 ABX500_GPIO(26)
+#define AB8500_PIN_J6 ABX500_GPIO(27)
+#define AB8500_PIN_K6 ABX500_GPIO(28)
+#define AB8500_PIN_G6 ABX500_GPIO(29)
+#define AB8500_PIN_H6 ABX500_GPIO(30)
+#define AB8500_PIN_F5 ABX500_GPIO(31)
+#define AB8500_PIN_G5 ABX500_GPIO(32)
+/* hole */
+#define AB8500_PIN_R17 ABX500_GPIO(34)
+#define AB8500_PIN_W15 ABX500_GPIO(35)
+#define AB8500_PIN_A17 ABX500_GPIO(36)
+#define AB8500_PIN_E15 ABX500_GPIO(37)
+#define AB8500_PIN_C17 ABX500_GPIO(38)
+#define AB8500_PIN_E16 ABX500_GPIO(39)
+#define AB8500_PIN_T19 ABX500_GPIO(40)
+#define AB8500_PIN_U19 ABX500_GPIO(41)
+#define AB8500_PIN_U2 ABX500_GPIO(42)
+
+/* indicates the highest GPIO number */
+#define AB8500_GPIO_MAX_NUMBER 42
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8500_pins[] = {
+ PINCTRL_PIN(AB8500_PIN_T10, "GPIO1_T10"),
+ PINCTRL_PIN(AB8500_PIN_T9, "GPIO2_T9"),
+ PINCTRL_PIN(AB8500_PIN_U9, "GPIO3_U9"),
+ PINCTRL_PIN(AB8500_PIN_W2, "GPIO4_W2"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_Y18, "GPIO6_Y18"),
+ PINCTRL_PIN(AB8500_PIN_AA20, "GPIO7_AA20"),
+ PINCTRL_PIN(AB8500_PIN_W18, "GPIO8_W18"),
+ PINCTRL_PIN(AB8500_PIN_AA19, "GPIO9_AA19"),
+ PINCTRL_PIN(AB8500_PIN_U17, "GPIO10_U17"),
+ PINCTRL_PIN(AB8500_PIN_AA18, "GPIO11_AA18"),
+ PINCTRL_PIN(AB8500_PIN_U16, "GPIO12_U16"),
+ PINCTRL_PIN(AB8500_PIN_W17, "GPIO13_W17"),
+ PINCTRL_PIN(AB8500_PIN_F14, "GPIO14_F14"),
+ PINCTRL_PIN(AB8500_PIN_B17, "GPIO15_B17"),
+ PINCTRL_PIN(AB8500_PIN_F15, "GPIO16_F15"),
+ PINCTRL_PIN(AB8500_PIN_P5, "GPIO17_P5"),
+ PINCTRL_PIN(AB8500_PIN_R5, "GPIO18_R5"),
+ PINCTRL_PIN(AB8500_PIN_U5, "GPIO19_U5"),
+ PINCTRL_PIN(AB8500_PIN_T5, "GPIO20_T5"),
+ PINCTRL_PIN(AB8500_PIN_H19, "GPIO21_H19"),
+ PINCTRL_PIN(AB8500_PIN_G20, "GPIO22_G20"),
+ PINCTRL_PIN(AB8500_PIN_G19, "GPIO23_G19"),
+ PINCTRL_PIN(AB8500_PIN_T14, "GPIO24_T14"),
+ PINCTRL_PIN(AB8500_PIN_R16, "GPIO25_R16"),
+ PINCTRL_PIN(AB8500_PIN_M16, "GPIO26_M16"),
+ PINCTRL_PIN(AB8500_PIN_J6, "GPIO27_J6"),
+ PINCTRL_PIN(AB8500_PIN_K6, "GPIO28_K6"),
+ PINCTRL_PIN(AB8500_PIN_G6, "GPIO29_G6"),
+ PINCTRL_PIN(AB8500_PIN_H6, "GPIO30_H6"),
+ PINCTRL_PIN(AB8500_PIN_F5, "GPIO31_F5"),
+ PINCTRL_PIN(AB8500_PIN_G5, "GPIO32_G5"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_R17, "GPIO34_R17"),
+ PINCTRL_PIN(AB8500_PIN_W15, "GPIO35_W15"),
+ PINCTRL_PIN(AB8500_PIN_A17, "GPIO36_A17"),
+ PINCTRL_PIN(AB8500_PIN_E15, "GPIO37_E15"),
+ PINCTRL_PIN(AB8500_PIN_C17, "GPIO38_C17"),
+ PINCTRL_PIN(AB8500_PIN_E16, "GPIO39_E16"),
+ PINCTRL_PIN(AB8500_PIN_T19, "GPIO40_T19"),
+ PINCTRL_PIN(AB8500_PIN_U19, "GPIO41_U19"),
+ PINCTRL_PIN(AB8500_PIN_U2, "GPIO42_U2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8500_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(6, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 4, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+ ABX500_PINRANGE(26, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(35, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(36, 7, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned ycbcr0123_d_1_pins[] = { AB8500_PIN_Y18, AB8500_PIN_AA20,
+ AB8500_PIN_W18, AB8500_PIN_AA19};
+static const unsigned gpio10_d_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned gpio11_d_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned gpio12_d_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned gpio13_d_1_pins[] = { AB8500_PIN_W17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned pwmout2_d_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned pwmout3_d_1_pins[] = { AB8500_PIN_F15 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8500_PIN_P5, AB8500_PIN_R5,
+ AB8500_PIN_U5, AB8500_PIN_T5 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB8500_PIN_H19, AB8500_PIN_G20,
+ AB8500_PIN_G19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio26_d_1_pins[] = { AB8500_PIN_M16 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8500_PIN_J6, AB8500_PIN_K6 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8500_PIN_G6, AB8500_PIN_H6 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8500_PIN_F5, AB8500_PIN_G5 };
+static const unsigned extcpena_d_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio35_d_1_pins[] = { AB8500_PIN_W15 };
+/* APE SPI */
+static const unsigned apespi_d_1_pins[] = { AB8500_PIN_A17, AB8500_PIN_E15,
+ AB8500_PIN_C17, AB8500_PIN_E16};
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8500_PIN_T19, AB8500_PIN_U19 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned gpio2_a_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned gpio3_a_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned gpio4_a_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned gpio6_a_1_pins[] = { AB8500_PIN_Y18 };
+static const unsigned gpio7_a_1_pins[] = { AB8500_PIN_AA20 };
+static const unsigned gpio8_a_1_pins[] = { AB8500_PIN_W18 };
+static const unsigned gpio9_a_1_pins[] = { AB8500_PIN_AA19 };
+/* YCbCr4 YCbCr5 YCbCr6 YCbCr7*/
+static const unsigned ycbcr4567_a_1_pins[] = { AB8500_PIN_U17, AB8500_PIN_AA18,
+ AB8500_PIN_U16, AB8500_PIN_W17};
+static const unsigned gpio14_a_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned gpio15_a_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned gpio16_a_1_pins[] = { AB8500_PIN_F15 };
+static const unsigned gpio17_a_1_pins[] = { AB8500_PIN_P5 };
+static const unsigned gpio18_a_1_pins[] = { AB8500_PIN_R5 };
+static const unsigned gpio19_a_1_pins[] = { AB8500_PIN_U5 };
+static const unsigned gpio20_a_1_pins[] = { AB8500_PIN_T5 };
+static const unsigned gpio21_a_1_pins[] = { AB8500_PIN_H19 };
+static const unsigned gpio22_a_1_pins[] = { AB8500_PIN_G20 };
+static const unsigned gpio23_a_1_pins[] = { AB8500_PIN_G19 };
+static const unsigned gpio24_a_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned gpio25_a_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio27_a_1_pins[] = { AB8500_PIN_J6 };
+static const unsigned gpio28_a_1_pins[] = { AB8500_PIN_K6 };
+static const unsigned gpio29_a_1_pins[] = { AB8500_PIN_G6 };
+static const unsigned gpio30_a_1_pins[] = { AB8500_PIN_H6 };
+static const unsigned gpio31_a_1_pins[] = { AB8500_PIN_F5 };
+static const unsigned gpio32_a_1_pins[] = { AB8500_PIN_G5 };
+static const unsigned gpio34_a_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio36_a_1_pins[] = { AB8500_PIN_A17 };
+static const unsigned gpio37_a_1_pins[] = { AB8500_PIN_E15 };
+static const unsigned gpio38_a_1_pins[] = { AB8500_PIN_C17 };
+static const unsigned gpio39_a_1_pins[] = { AB8500_PIN_E16 };
+static const unsigned gpio40_a_1_pins[] = { AB8500_PIN_T19 };
+static const unsigned gpio41_a_1_pins[] = { AB8500_PIN_U19 };
+static const unsigned gpio42_a_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction B colum */
+static const unsigned hiqclkena_b_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned usbuiccpd_b_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned i2ctrig1_b_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned i2ctrig2_b_1_pins[] = { AB8500_PIN_W17 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8500_PIN_W17 };
+
+
+#define AB8500_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8500_groups[] = {
+ /* default column */
+ AB8500_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(ycbcr0123_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio26_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio35_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(apespi_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ /* Altfunction A column */
+ AB8500_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio6_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio7_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio8_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio9_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(ycbcr4567_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio36_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio37_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio38_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio39_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ /* Altfunction B column */
+ AB8500_PIN_GROUP(hiqclkena_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(usbuiccpd_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig1_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig2_b_1, ABX500_ALT_B),
+ /* Altfunction C column */
+ AB8500_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8500_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8500_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB8500_FUNC_GROUPS(ycbcr, "ycbcr0123_d_1", "ycbcr4567_a_1");
+AB8500_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio6_a_1", "gpio7_a_1", "gpio8_a_1", "gpio9_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio12_d_1", "gpio13_d_1",
+ "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+ "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio21_a_1",
+ "gpio22_a_1", "gpio23_a_1", "gpio24_a_1", "gpio25_a_1",
+ "gpio26_d_1", "gpio27_a_1", "gpio28_a_1", "gpio29_a_1",
+ "gpio30_a_1", "gpio31_a_1", "gpio32_a_1", "gpio34_a_1",
+ "gpio35_d_1", "gpio36_a_1", "gpio37_a_1", "gpio38_a_1",
+ "gpio39_a_1", "gpio40_a_1", "gpio41_a_1", "gpio42_a_1");
+AB8500_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8500_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8500_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_b_1");
+AB8500_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8500_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8500_FUNC_GROUPS(apespi, "apespi_d_1");
+AB8500_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8500_FUNC_GROUPS(hiqclkena, "hiqclkena_b_1");
+AB8500_FUNC_GROUPS(i2ctrig, "i2ctrig1_b_1", "i2ctrig2_b_1");
+AB8500_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8500_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(ycbcr),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(apespi),
+ FUNCTION(modsclsda),
+ FUNCTION(hiqclkena),
+ FUNCTION(i2ctrig),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8500 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1 ,2),
+ * means that pin AB8500_PIN_W17 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 0
+ * alt_B | 0 | 0 | 1
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED),
+ * means that pin AB8500_PIN_W18 (pin 8) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=7 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8500_alternate_functions[AB8500_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ /* bit 4 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO6, altA controlled by bit 5*/
+ ALTERNATE_FUNCTIONS(7, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO7, altA controlled by bit 6*/
+ ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO8, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(9, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO9, altA controlled by bit 0*/
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 0, 1, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 1, 0), /* GPIO11, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, 3, 2, UNUSED, 0, 1, 0), /* GPIO12, altA and altB controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ /* pin 26 special case, no alternate function, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ /* pin 35 special case, no alternate function, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO35 */
+ ALTERNATE_FUNCTIONS(36, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO36, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(37, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO37, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(38, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO38, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(39, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO39, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+};
+
+/*
+ * Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO6 to GPIO13
+ * GPIO24 and GPIO25
+ * GPIO36 to GPIO41
+ */
+struct abx500_gpio_irq_cluster ab8500_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(6, 13, AB8500_INT_GPIO6R),
+ GPIO_IRQ_CLUSTER(24, 25, AB8500_INT_GPIO24R),
+ GPIO_IRQ_CLUSTER(36, 41, AB8500_INT_GPIO36R),
+};
+
+static struct abx500_pinctrl_soc_data ab8500_soc = {
+ .gpio_ranges = ab8500_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8500_pinranges),
+ .pins = ab8500_pins,
+ .npins = ARRAY_SIZE(ab8500_pins),
+ .functions = ab8500_functions,
+ .nfunctions = ARRAY_SIZE(ab8500_functions),
+ .groups = ab8500_groups,
+ .ngroups = ARRAY_SIZE(ab8500_groups),
+ .alternate_functions = ab8500_alternate_functions,
+ .gpio_irq_cluster = ab8500_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8500_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8500_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c
new file mode 100644
index 0000000..3a4238e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8505.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8505_PIN_N4 ABX500_GPIO(1)
+#define AB8505_PIN_R5 ABX500_GPIO(2)
+#define AB8505_PIN_P5 ABX500_GPIO(3)
+/* hole */
+#define AB8505_PIN_B16 ABX500_GPIO(10)
+#define AB8505_PIN_B17 ABX500_GPIO(11)
+/* hole */
+#define AB8505_PIN_D17 ABX500_GPIO(13)
+#define AB8505_PIN_C16 ABX500_GPIO(14)
+/* hole */
+#define AB8505_PIN_P2 ABX500_GPIO(17)
+#define AB8505_PIN_N3 ABX500_GPIO(18)
+#define AB8505_PIN_T1 ABX500_GPIO(19)
+#define AB8505_PIN_P3 ABX500_GPIO(20)
+/* hole */
+#define AB8505_PIN_H14 ABX500_GPIO(34)
+/* hole */
+#define AB8505_PIN_J15 ABX500_GPIO(40)
+#define AB8505_PIN_J14 ABX500_GPIO(41)
+/* hole */
+#define AB8505_PIN_L4 ABX500_GPIO(50)
+/* hole */
+#define AB8505_PIN_D16 ABX500_GPIO(52)
+#define AB8505_PIN_D15 ABX500_GPIO(53)
+
+/* indicates the higher GPIO number */
+#define AB8505_GPIO_MAX_NUMBER 53
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8505_pins[] = {
+ PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
+ PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
+ PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
+ PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
+ PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
+ PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
+ PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
+ PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
+ PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
+ PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8505_pinranges[] = {
+ ABX500_PINRANGE(1, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(17, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 2, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(52, 2, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
+/* audio data interface 2*/
+static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
+ AB8505_PIN_T1, AB8505_PIN_P3 };
+static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
+static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
+static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
+static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
+static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
+static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
+static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
+static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
+static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };
+
+#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8505_groups[] = {
+ AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8505_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1");
+AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
+ "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
+ "gpio52_a_1", "gpio53_a_1");
+AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
+AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
+AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
+AB8505_FUNC_GROUPS(service, "service_d_1");
+AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
+AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
+AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
+AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8505_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi2),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(extvibra),
+ FUNCTION(extvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8505 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+};
+
+/*
+ * For AB8505 Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO10 to GPIO11
+ * GPIO13
+ * GPIO40 and GPIO41
+ * GPIO50
+ * GPIO52 to GPIO53
+ */
+struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(10, 11, AB8500_INT_GPIO10R),
+ GPIO_IRQ_CLUSTER(13, 13, AB8500_INT_GPIO13R),
+ GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R),
+ GPIO_IRQ_CLUSTER(50, 50, AB9540_INT_GPIO50R),
+ GPIO_IRQ_CLUSTER(52, 53, AB9540_INT_GPIO52R),
+};
+
+static struct abx500_pinctrl_soc_data ab8505_soc = {
+ .gpio_ranges = ab8505_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
+ .pins = ab8505_pins,
+ .npins = ARRAY_SIZE(ab8505_pins),
+ .functions = ab8505_functions,
+ .nfunctions = ARRAY_SIZE(ab8505_functions),
+ .groups = ab8505_groups,
+ .ngroups = ARRAY_SIZE(ab8505_groups),
+ .alternate_functions = ab8505_alternate_functions,
+ .gpio_irq_cluster = ab8505_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8505_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-ab8540.c b/drivers/pinctrl/pinctrl-ab8540.c
new file mode 100644
index 0000000..8ee1e8d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8540.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8540_PIN_J16 ABX500_GPIO(1)
+#define AB8540_PIN_D17 ABX500_GPIO(2)
+#define AB8540_PIN_C12 ABX500_GPIO(3)
+#define AB8540_PIN_G12 ABX500_GPIO(4)
+/* hole */
+#define AB8540_PIN_D16 ABX500_GPIO(14)
+#define AB8540_PIN_F15 ABX500_GPIO(15)
+#define AB8540_PIN_J8 ABX500_GPIO(16)
+#define AB8540_PIN_K16 ABX500_GPIO(17)
+#define AB8540_PIN_G15 ABX500_GPIO(18)
+#define AB8540_PIN_F17 ABX500_GPIO(19)
+#define AB8540_PIN_E17 ABX500_GPIO(20)
+/* hole */
+#define AB8540_PIN_AA16 ABX500_GPIO(27)
+#define AB8540_PIN_W18 ABX500_GPIO(28)
+#define AB8540_PIN_Y15 ABX500_GPIO(29)
+#define AB8540_PIN_W16 ABX500_GPIO(30)
+#define AB8540_PIN_V15 ABX500_GPIO(31)
+#define AB8540_PIN_W17 ABX500_GPIO(32)
+/* hole */
+#define AB8540_PIN_D12 ABX500_GPIO(42)
+#define AB8540_PIN_P4 ABX500_GPIO(43)
+#define AB8540_PIN_AB1 ABX500_GPIO(44)
+#define AB8540_PIN_K7 ABX500_GPIO(45)
+#define AB8540_PIN_L7 ABX500_GPIO(46)
+#define AB8540_PIN_G10 ABX500_GPIO(47)
+#define AB8540_PIN_K12 ABX500_GPIO(48)
+/* hole */
+#define AB8540_PIN_N8 ABX500_GPIO(51)
+#define AB8540_PIN_P12 ABX500_GPIO(52)
+#define AB8540_PIN_K8 ABX500_GPIO(53)
+#define AB8540_PIN_J11 ABX500_GPIO(54)
+#define AB8540_PIN_AC2 ABX500_GPIO(55)
+#define AB8540_PIN_AB2 ABX500_GPIO(56)
+
+/* indicates the highest GPIO number */
+#define AB8540_GPIO_MAX_NUMBER 56
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8540_pins[] = {
+ PINCTRL_PIN(AB8540_PIN_J16, "GPIO1_J16"),
+ PINCTRL_PIN(AB8540_PIN_D17, "GPIO2_D17"),
+ PINCTRL_PIN(AB8540_PIN_C12, "GPIO3_C12"),
+ PINCTRL_PIN(AB8540_PIN_G12, "GPIO4_G12"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_D16, "GPIO14_D16"),
+ PINCTRL_PIN(AB8540_PIN_F15, "GPIO15_F15"),
+ PINCTRL_PIN(AB8540_PIN_J8, "GPIO16_J8"),
+ PINCTRL_PIN(AB8540_PIN_K16, "GPIO17_K16"),
+ PINCTRL_PIN(AB8540_PIN_G15, "GPIO18_G15"),
+ PINCTRL_PIN(AB8540_PIN_F17, "GPIO19_F17"),
+ PINCTRL_PIN(AB8540_PIN_E17, "GPIO20_E17"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_AA16, "GPIO27_AA16"),
+ PINCTRL_PIN(AB8540_PIN_W18, "GPIO28_W18"),
+ PINCTRL_PIN(AB8540_PIN_Y15, "GPIO29_Y15"),
+ PINCTRL_PIN(AB8540_PIN_W16, "GPIO30_W16"),
+ PINCTRL_PIN(AB8540_PIN_V15, "GPIO31_V15"),
+ PINCTRL_PIN(AB8540_PIN_W17, "GPIO32_W17"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_D12, "GPIO42_D12"),
+ PINCTRL_PIN(AB8540_PIN_P4, "GPIO43_P4"),
+ PINCTRL_PIN(AB8540_PIN_AB1, "GPIO44_AB1"),
+ PINCTRL_PIN(AB8540_PIN_K7, "GPIO45_K7"),
+ PINCTRL_PIN(AB8540_PIN_L7, "GPIO46_L7"),
+ PINCTRL_PIN(AB8540_PIN_G10, "GPIO47_G10"),
+ PINCTRL_PIN(AB8540_PIN_K12, "GPIO48_K12"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_N8, "GPIO51_N8"),
+ PINCTRL_PIN(AB8540_PIN_P12, "GPIO52_P12"),
+ PINCTRL_PIN(AB8540_PIN_K8, "GPIO53_K8"),
+ PINCTRL_PIN(AB8540_PIN_J11, "GPIO54_J11"),
+ PINCTRL_PIN(AB8540_PIN_AC2, "GPIO55_AC2"),
+ PINCTRL_PIN(AB8540_PIN_AB2, "GPIO56_AB2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8540_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(14, 7, ABX500_ALT_A),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(42, 7, ABX500_ALT_A),
+ ABX500_PINRANGE(51, 6, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8540_PIN_J16 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8540_PIN_D17 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8540_PIN_C12 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8540_PIN_G12 };
+static const unsigned pwmout1_d_1_pins[] = { AB8540_PIN_D16 };
+static const unsigned pwmout2_d_1_pins[] = { AB8540_PIN_F15 };
+static const unsigned pwmout3_d_1_pins[] = { AB8540_PIN_J8 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8540_PIN_K16, AB8540_PIN_G15,
+ AB8540_PIN_F17, AB8540_PIN_E17 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8540_PIN_AA16, AB8540_PIN_W18 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8540_PIN_Y15, AB8540_PIN_W16 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8540_PIN_V15, AB8540_PIN_W17 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8540_PIN_D12 };
+static const unsigned batremn_d_1_pins[] = { AB8540_PIN_P4 };
+static const unsigned service_d_1_pins[] = { AB8540_PIN_AB1 };
+static const unsigned pwrctrl0_d_1_pins[] = { AB8540_PIN_K7 };
+static const unsigned pwrctrl1_d_1_pins[] = { AB8540_PIN_L7 };
+static const unsigned pwmextvibra1_d_1_pins[] = { AB8540_PIN_G10 };
+static const unsigned pwmextvibra2_d_1_pins[] = { AB8540_PIN_K12 };
+static const unsigned gpio1_vbat_d_1_pins[] = { AB8540_PIN_N8 };
+static const unsigned gpio2_vbat_d_1_pins[] = { AB8540_PIN_P12 };
+static const unsigned gpio3_vbat_d_1_pins[] = { AB8540_PIN_K8 };
+static const unsigned gpio4_vbat_d_1_pins[] = { AB8540_PIN_J11 };
+static const unsigned pdmclkdat_d_1_pins[] = { AB8540_PIN_AC2, AB8540_PIN_AB2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8540_PIN_J16 };
+static const unsigned gpio2_a_1_pins[] = { AB8540_PIN_D17 };
+static const unsigned gpio3_a_1_pins[] = { AB8540_PIN_C12 };
+static const unsigned gpio4_a_1_pins[] = { AB8540_PIN_G12 };
+static const unsigned gpio14_a_1_pins[] = { AB8540_PIN_D16 };
+static const unsigned gpio15_a_1_pins[] = { AB8540_PIN_F15 };
+static const unsigned gpio16_a_1_pins[] = { AB8540_PIN_J8 };
+static const unsigned gpio17_a_1_pins[] = { AB8540_PIN_K16 };
+static const unsigned gpio18_a_1_pins[] = { AB8540_PIN_G15 };
+static const unsigned gpio19_a_1_pins[] = { AB8540_PIN_F17 };
+static const unsigned gpio20_a_1_pins[] = { AB8540_PIN_E17 };
+static const unsigned gpio27_a_1_pins[] = { AB8540_PIN_AA16 };
+static const unsigned gpio28_a_1_pins[] = { AB8540_PIN_W18 };
+static const unsigned gpio29_a_1_pins[] = { AB8540_PIN_Y15 };
+static const unsigned gpio30_a_1_pins[] = { AB8540_PIN_W16 };
+static const unsigned gpio31_a_1_pins[] = { AB8540_PIN_V15 };
+static const unsigned gpio32_a_1_pins[] = { AB8540_PIN_W17 };
+static const unsigned gpio42_a_1_pins[] = { AB8540_PIN_D12 };
+static const unsigned gpio43_a_1_pins[] = { AB8540_PIN_P4 };
+static const unsigned gpio44_a_1_pins[] = { AB8540_PIN_AB1 };
+static const unsigned gpio45_a_1_pins[] = { AB8540_PIN_K7 };
+static const unsigned gpio46_a_1_pins[] = { AB8540_PIN_L7 };
+static const unsigned gpio47_a_1_pins[] = { AB8540_PIN_G10 };
+static const unsigned gpio48_a_1_pins[] = { AB8540_PIN_K12 };
+static const unsigned gpio51_a_1_pins[] = { AB8540_PIN_N8 };
+static const unsigned gpio52_a_1_pins[] = { AB8540_PIN_P12 };
+static const unsigned gpio53_a_1_pins[] = { AB8540_PIN_K8 };
+static const unsigned gpio54_a_1_pins[] = { AB8540_PIN_J11 };
+static const unsigned gpio55_a_1_pins[] = { AB8540_PIN_AC2 };
+static const unsigned gpio56_a_1_pins[] = { AB8540_PIN_AB2 };
+
+#define AB8540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8540_groups[] = {
+ /* default column */
+ AB8540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwrctrl0_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwrctrl1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmextvibra1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmextvibra2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio1_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio2_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio3_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio4_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pdmclkdat_d_1, ABX500_DEFAULT),
+ /* Altfunction A column */
+ AB8540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio43_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio44_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio45_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio46_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio47_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio48_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio54_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio55_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio56_a_1, ABX500_ALT_A),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8540_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1");
+AB8540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+ "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio27_a_1",
+ "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1",
+ "gpio32_a_1", "gpio42_a_1", "gpio43_a_1", "gpio44_a_1",
+ "gpio45_a_1", "gpio46_a_1", "gpio47_a_1", "gpio48_a_1",
+ "gpio51_a_1", "gpio52_a_1", "gpio53_a_1", "gpio54_a_1",
+ "gpio55_a_1", "gpio56_a_1");
+AB8540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8540_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8540_FUNC_GROUPS(batremn, "batremn_d_1");
+AB8540_FUNC_GROUPS(service, "service_d_1");
+AB8540_FUNC_GROUPS(pwrctrl, "pwrctrl0_d_1", "pwrctrl1_d_1");
+AB8540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_d_1", "pwmextvibra2_d_1");
+AB8540_FUNC_GROUPS(gpio_vbat, "gpio1_vbat_d_1", "gpio2_vbat_d_1",
+ "gpio3_vbat_d_1", "gpio4_vbat_d_1");
+AB8540_FUNC_GROUPS(pdm, "pdmclkdat_d_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8540_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(dmic),
+ FUNCTION(batremn),
+ FUNCTION(service),
+ FUNCTION(pwrctrl),
+ FUNCTION(pwmextvibra),
+ FUNCTION(gpio_vbat),
+ FUNCTION(pdm),
+};
+
+/*
+ * this table translates what's is in the AB8540 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ * AB8540 only supports DEFAULT and ALTA functions, so ALTERNATFUNC
+ * registers is not used
+ *
+ */
+
+struct alternate_functions ab8540_alternate_functions[AB8540_GPIO_MAX_NUMBER + 1] = {
+ /* GPIOSEL1 - bit 4-7 reserved */
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */
+ /* GPIOSEL2 - bit 0-4 reserved */
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */
+ ALTERNATE_FUNCTIONS(10, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO10 */
+ ALTERNATE_FUNCTIONS(11, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO11 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */
+ ALTERNATE_FUNCTIONS(13, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO13 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /* GPIOSEL3 - bit 4-7 reserved */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(19, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(20, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21 */
+ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22 */
+ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23 */
+ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24 */
+ /* GPIOSEL4 - bit 0-1 reserved */
+ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25 */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+ /* GPIOSEL5 - bit 0-7 reserved */
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO34 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */
+ ALTERNATE_FUNCTIONS(40, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO40 */
+ /* GPIOSEL6 - bit 0 reserved */
+ ALTERNATE_FUNCTIONS(41, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO41 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(43, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO43, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(44, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO44, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(45, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO45, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(46, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO46, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(47, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO47, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(48, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO48, altA controlled by bit 7 */
+ /* GPIOSEL7 - bit 0-1 reserved */
+ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */
+ ALTERNATE_FUNCTIONS(50, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO50 */
+ ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(55, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO55, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(56, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO56, altA controlled by bit 7 */
+};
+
+static struct pullud ab8540_pullud = {
+ .first_pin = 51, /* GPIO1_VBAT */
+ .last_pin = 54, /* GPIO4_VBAT */
+};
+
+/*
+ * For AB8540 Only some GPIOs are interrupt capable:
+ * GPIO43 to GPIO44
+ * GPIO51 to GPIO54
+ */
+struct abx500_gpio_irq_cluster ab8540_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(43, 43, AB8540_INT_GPIO43F),
+ GPIO_IRQ_CLUSTER(44, 44, AB8540_INT_GPIO44F),
+ GPIO_IRQ_CLUSTER(51, 54, AB9540_INT_GPIO51R),
+};
+
+static struct abx500_pinctrl_soc_data ab8540_soc = {
+ .gpio_ranges = ab8540_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8540_pinranges),
+ .pins = ab8540_pins,
+ .npins = ARRAY_SIZE(ab8540_pins),
+ .functions = ab8540_functions,
+ .nfunctions = ARRAY_SIZE(ab8540_functions),
+ .groups = ab8540_groups,
+ .ngroups = ARRAY_SIZE(ab8540_groups),
+ .alternate_functions = ab8540_alternate_functions,
+ .pullud = &ab8540_pullud,
+ .gpio_irq_cluster = ab8540_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8540_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8540_INT_GPIO43R,
+ .irq_gpio_falling_offset = AB8540_INT_GPIO43F,
+ .irq_gpio_factor = 2,
+};
+
+void
+abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8540_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-ab9540.c b/drivers/pinctrl/pinctrl-ab9540.c
new file mode 100644
index 0000000..7610bd0
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab9540.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB9540_PIN_R4 ABX500_GPIO(1)
+#define AB9540_PIN_V3 ABX500_GPIO(2)
+#define AB9540_PIN_T4 ABX500_GPIO(3)
+#define AB9540_PIN_T5 ABX500_GPIO(4)
+/* hole */
+#define AB9540_PIN_B18 ABX500_GPIO(10)
+#define AB9540_PIN_C18 ABX500_GPIO(11)
+/* hole */
+#define AB9540_PIN_D18 ABX500_GPIO(13)
+#define AB9540_PIN_B19 ABX500_GPIO(14)
+#define AB9540_PIN_C19 ABX500_GPIO(15)
+#define AB9540_PIN_D19 ABX500_GPIO(16)
+#define AB9540_PIN_R3 ABX500_GPIO(17)
+#define AB9540_PIN_T2 ABX500_GPIO(18)
+#define AB9540_PIN_U2 ABX500_GPIO(19)
+#define AB9540_PIN_V2 ABX500_GPIO(20)
+#define AB9540_PIN_N17 ABX500_GPIO(21)
+#define AB9540_PIN_N16 ABX500_GPIO(22)
+#define AB9540_PIN_M19 ABX500_GPIO(23)
+#define AB9540_PIN_T3 ABX500_GPIO(24)
+#define AB9540_PIN_W2 ABX500_GPIO(25)
+/* hole */
+#define AB9540_PIN_H4 ABX500_GPIO(27)
+#define AB9540_PIN_F1 ABX500_GPIO(28)
+#define AB9540_PIN_F4 ABX500_GPIO(29)
+#define AB9540_PIN_F2 ABX500_GPIO(30)
+#define AB9540_PIN_E4 ABX500_GPIO(31)
+#define AB9540_PIN_F3 ABX500_GPIO(32)
+/* hole */
+#define AB9540_PIN_J13 ABX500_GPIO(34)
+/* hole */
+#define AB9540_PIN_L17 ABX500_GPIO(40)
+#define AB9540_PIN_L16 ABX500_GPIO(41)
+#define AB9540_PIN_W3 ABX500_GPIO(42)
+#define AB9540_PIN_N4 ABX500_GPIO(50)
+#define AB9540_PIN_G12 ABX500_GPIO(51)
+#define AB9540_PIN_E17 ABX500_GPIO(52)
+#define AB9540_PIN_D11 ABX500_GPIO(53)
+#define AB9540_PIN_M18 ABX500_GPIO(54)
+
+/* indicates the highest GPIO number */
+#define AB9540_GPIO_MAX_NUMBER 54
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab9540_pins[] = {
+ PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"),
+ PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"),
+ PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"),
+ PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"),
+ PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"),
+ PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"),
+ PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"),
+ PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"),
+ PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"),
+ PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"),
+ PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"),
+ PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"),
+ PINCTRL_PIN(AB9540_PIN_N17, "GPIO21_N17"),
+ PINCTRL_PIN(AB9540_PIN_N16, "GPIO22_N16"),
+ PINCTRL_PIN(AB9540_PIN_M19, "GPIO23_M19"),
+ PINCTRL_PIN(AB9540_PIN_T3, "GPIO24_T3"),
+ PINCTRL_PIN(AB9540_PIN_W2, "GPIO25_W2"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_H4, "GPIO27_H4"),
+ PINCTRL_PIN(AB9540_PIN_F1, "GPIO28_F1"),
+ PINCTRL_PIN(AB9540_PIN_F4, "GPIO29_F4"),
+ PINCTRL_PIN(AB9540_PIN_F2, "GPIO30_F2"),
+ PINCTRL_PIN(AB9540_PIN_E4, "GPIO31_E4"),
+ PINCTRL_PIN(AB9540_PIN_F3, "GPIO32_F3"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_J13, "GPIO34_J13"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_L17, "GPIO40_L17"),
+ PINCTRL_PIN(AB9540_PIN_L16, "GPIO41_L16"),
+ PINCTRL_PIN(AB9540_PIN_W3, "GPIO42_W3"),
+ PINCTRL_PIN(AB9540_PIN_N4, "GPIO50_N4"),
+ PINCTRL_PIN(AB9540_PIN_G12, "GPIO51_G12"),
+ PINCTRL_PIN(AB9540_PIN_E17, "GPIO52_E17"),
+ PINCTRL_PIN(AB9540_PIN_D11, "GPIO53_D11"),
+ PINCTRL_PIN(AB9540_PIN_M18, "GPIO60_M18"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab9540_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(51, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(54, 1, ABX500_DEFAULT),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned gpio10_d_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned gpio11_d_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned gpio13_d_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmout1_d_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned pwmout2_d_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned pwmout3_d_1_pins[] = { AB9540_PIN_D19 };
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB9540_PIN_R3, AB9540_PIN_T2,
+ AB9540_PIN_U2, AB9540_PIN_V2 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB9540_PIN_N17, AB9540_PIN_N16,
+ AB9540_PIN_M19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB9540_PIN_W2 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB9540_PIN_H4, AB9540_PIN_F1 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB9540_PIN_F4, AB9540_PIN_F2 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB9540_PIN_E4, AB9540_PIN_F3 };
+static const unsigned extcpena_d_1_pins[] = { AB9540_PIN_J13 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB9540_PIN_L17, AB9540_PIN_L16 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio50_d_1_pins[] = { AB9540_PIN_N4 };
+static const unsigned batremn_d_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned resethw_d_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned service_d_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned gpio60_d_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned gpio2_a_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned gpio3_a_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned gpio4_a_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pdmclk_a_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned uartdata_a_1_pins[] = { AB9540_PIN_D18, AB9540_PIN_N4 };
+static const unsigned gpio14_a_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned gpio15_a_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned gpio16_a_1_pins[] = { AB9540_PIN_D19 };
+static const unsigned gpio17_a_1_pins[] = { AB9540_PIN_R3 };
+static const unsigned gpio18_a_1_pins[] = { AB9540_PIN_T2 };
+static const unsigned gpio19_a_1_pins[] = { AB9540_PIN_U2 };
+static const unsigned gpio20_a_1_pins[] = { AB9540_PIN_V2 };
+static const unsigned gpio21_a_1_pins[] = { AB9540_PIN_N17 };
+static const unsigned gpio22_a_1_pins[] = { AB9540_PIN_N16 };
+static const unsigned gpio23_a_1_pins[] = { AB9540_PIN_M19 };
+static const unsigned gpio24_a_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned gpio25_a_1_pins[] = { AB9540_PIN_W2 };
+static const unsigned gpio27_a_1_pins[] = { AB9540_PIN_H4 };
+static const unsigned gpio28_a_1_pins[] = { AB9540_PIN_F1 };
+static const unsigned gpio29_a_1_pins[] = { AB9540_PIN_F4 };
+static const unsigned gpio30_a_1_pins[] = { AB9540_PIN_F2 };
+static const unsigned gpio31_a_1_pins[] = { AB9540_PIN_E4 };
+static const unsigned gpio32_a_1_pins[] = { AB9540_PIN_F3 };
+static const unsigned gpio34_a_1_pins[] = { AB9540_PIN_J13 };
+static const unsigned gpio40_a_1_pins[] = { AB9540_PIN_L17 };
+static const unsigned gpio41_a_1_pins[] = { AB9540_PIN_L16 };
+static const unsigned gpio42_a_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio51_a_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned gpio52_a_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned gpio53_a_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned usbuiccpd_a_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pwmextvibra1_b_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmextvibra2_b_1_pins[] = { AB9540_PIN_N4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB9540_PIN_D18 };
+
+#define AB9540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab9540_groups[] = {
+ /* default column */
+ AB9540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio60_d_1, ABX500_DEFAULT),
+
+ /* Altfunction A column */
+ AB9540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(uartdata_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(usbuiccpd_a_1, ABX500_ALT_A),
+
+ /* Altfunction B column */
+ AB9540_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra1_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra2_b_1, ABX500_ALT_B),
+
+ /* Altfunction C column */
+ AB9540_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB9540_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB9540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB9540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", "gpio18_a_1",
+ "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", "gpio22_a_1",
+ "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", "gpio27_a_1",
+ "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1",
+ "gpio32_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1",
+ "gpio42_a_1", "gpio50_d_1", "gpio51_a_1", "gpio52_a_1",
+ "gpio53_a_1", "gpio60_d_1");
+AB9540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB9540_FUNC_GROUPS(adi1, "adi1_d_1");
+AB9540_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_a_1");
+AB9540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB9540_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB9540_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB9540_FUNC_GROUPS(batremn, "batremn_d_1");
+AB9540_FUNC_GROUPS(resethw, "resethw_d_1");
+AB9540_FUNC_GROUPS(service, "service_d_1");
+AB9540_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB9540_FUNC_GROUPS(pdm, "pdmdata_b_1", "pdmclk_a_1");
+AB9540_FUNC_GROUPS(uartdata, "uartdata_a_1");
+AB9540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_b_1", "pwmextvibra2_b_1");
+AB9540_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab9540_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(batremn),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(pwmextvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB9540 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB9540_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab9540alternate_functions[AB9540_GPIO_MAX_NUMBER + 1] = {
+ /* GPIOSEL1 - bits 4-7 are reserved */
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */
+ /* GPIOSEL2 - bits 0 and 3 are reserved */
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /* GPIOSEL3 - bit 1-3 reserved
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+ /* GPIOSEL4 - bit 1 reserved */
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+ /* GPIOSEL5 - bit 0, 2-6 are reserved */
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+ /* GPIOSEL6 - bit 2-7 are reserved */
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43 */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44 */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45 */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46 */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47 */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48 */
+ /*
+ * GPIOSEL7 - bit 0 and 6-7 are reserved
+ * special case with GPIO60, wich is located at offset 5 of gpiosel7
+ * don't know why it has been called GPIO60 in AB9540 datasheet,
+ * GPIO54 would be logical..., so at SOC point of view we consider
+ * GPIO60 = GPIO54
+ */
+ ALTERNATE_FUNCTIONS(49, 0, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54 = GPIO60, altA controlled by bit 5 */
+};
+
+struct abx500_gpio_irq_cluster ab9540_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(10, 13, AB8500_INT_GPIO10R),
+ GPIO_IRQ_CLUSTER(24, 25, AB8500_INT_GPIO24R),
+ GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R),
+ GPIO_IRQ_CLUSTER(50, 54, AB9540_INT_GPIO50R),
+};
+
+static struct abx500_pinctrl_soc_data ab9540_soc = {
+ .gpio_ranges = ab9540_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab9540_pinranges),
+ .pins = ab9540_pins,
+ .npins = ARRAY_SIZE(ab9540_pins),
+ .functions = ab9540_functions,
+ .nfunctions = ARRAY_SIZE(ab9540_functions),
+ .groups = ab9540_groups,
+ .ngroups = ARRAY_SIZE(ab9540_groups),
+ .alternate_functions = ab9540alternate_functions,
+ .gpio_irq_cluster = ab9540_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab9540_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab9540_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
new file mode 100644
index 0000000..caecdd3
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -0,0 +1,1012 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2013
+ *
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "pinctrl-abx500.h"
+
+/*
+ * The AB9540 and AB8540 GPIO support are extended versions
+ * of the AB8500 GPIO support.
+ * The AB9540 supports an additional (7th) register so that
+ * more GPIO may be configured and used.
+ * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have
+ * internal pull-up and pull-down capabilities.
+ */
+
+/*
+ * GPIO registers offset
+ * Bank: 0x10
+ */
+#define AB8500_GPIO_SEL1_REG 0x00
+#define AB8500_GPIO_SEL2_REG 0x01
+#define AB8500_GPIO_SEL3_REG 0x02
+#define AB8500_GPIO_SEL4_REG 0x03
+#define AB8500_GPIO_SEL5_REG 0x04
+#define AB8500_GPIO_SEL6_REG 0x05
+#define AB9540_GPIO_SEL7_REG 0x06
+
+#define AB8500_GPIO_DIR1_REG 0x10
+#define AB8500_GPIO_DIR2_REG 0x11
+#define AB8500_GPIO_DIR3_REG 0x12
+#define AB8500_GPIO_DIR4_REG 0x13
+#define AB8500_GPIO_DIR5_REG 0x14
+#define AB8500_GPIO_DIR6_REG 0x15
+#define AB9540_GPIO_DIR7_REG 0x16
+
+#define AB8500_GPIO_OUT1_REG 0x20
+#define AB8500_GPIO_OUT2_REG 0x21
+#define AB8500_GPIO_OUT3_REG 0x22
+#define AB8500_GPIO_OUT4_REG 0x23
+#define AB8500_GPIO_OUT5_REG 0x24
+#define AB8500_GPIO_OUT6_REG 0x25
+#define AB9540_GPIO_OUT7_REG 0x26
+
+#define AB8500_GPIO_PUD1_REG 0x30
+#define AB8500_GPIO_PUD2_REG 0x31
+#define AB8500_GPIO_PUD3_REG 0x32
+#define AB8500_GPIO_PUD4_REG 0x33
+#define AB8500_GPIO_PUD5_REG 0x34
+#define AB8500_GPIO_PUD6_REG 0x35
+#define AB9540_GPIO_PUD7_REG 0x36
+
+#define AB8500_GPIO_IN1_REG 0x40
+#define AB8500_GPIO_IN2_REG 0x41
+#define AB8500_GPIO_IN3_REG 0x42
+#define AB8500_GPIO_IN4_REG 0x43
+#define AB8500_GPIO_IN5_REG 0x44
+#define AB8500_GPIO_IN6_REG 0x45
+#define AB9540_GPIO_IN7_REG 0x46
+#define AB8540_GPIO_VINSEL_REG 0x47
+#define AB8540_GPIO_PULL_UPDOWN_REG 0x48
+#define AB8500_GPIO_ALTFUN_REG 0x50
+#define AB8540_GPIO_PULL_UPDOWN_MASK 0x03
+#define AB8540_GPIO_VINSEL_MASK 0x03
+#define AB8540_GPIOX_VBAT_START 51
+#define AB8540_GPIOX_VBAT_END 54
+
+struct abx500_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctldev;
+ struct abx500_pinctrl_soc_data *soc;
+ struct gpio_chip chip;
+ struct ab8500 *parent;
+ struct mutex lock;
+ struct abx500_gpio_irq_cluster *irq_cluster;
+ int irq_cluster_size;
+};
+
+/**
+ * to_abx500_pinctrl() - get the pointer to abx500_pinctrl
+ * @chip: Member of the structure abx500_pinctrl
+ */
+static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip)
+{
+ return container_of(chip, struct abx500_pinctrl, chip);
+}
+
+static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
+ unsigned offset, bool *bit)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ u8 pos = offset % 8;
+ u8 val;
+ int ret;
+
+ reg += offset / 8;
+ ret = abx500_get_register_interruptible(pct->dev,
+ AB8500_MISC, reg, &val);
+
+ *bit = !!(val & BIT(pos));
+
+ if (ret < 0)
+ dev_err(pct->dev,
+ "%s read reg =%x, offset=%x failed\n",
+ __func__, reg, offset);
+
+ return ret;
+}
+
+static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
+ unsigned offset, int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ u8 pos = offset % 8;
+ int ret;
+
+ reg += offset / 8;
+ ret = abx500_mask_and_set_register_interruptible(pct->dev,
+ AB8500_MISC, reg, BIT(pos), val << pos);
+ if (ret < 0)
+ dev_err(pct->dev, "%s write failed\n", __func__);
+
+ return ret;
+}
+
+/**
+ * abx500_gpio_get() - Get the particular GPIO value
+ * @chip: Gpio device
+ * @offset: GPIO number to read
+ */
+static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ bool bit;
+ int ret;
+
+ ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
+ offset, &bit);
+ if (ret < 0) {
+ dev_err(pct->dev, "%s failed\n", __func__);
+ return ret;
+ }
+
+ return bit;
+}
+
+static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ int ret;
+
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
+ if (ret < 0)
+ dev_err(pct->dev, "%s write failed\n", __func__);
+}
+
+static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
+ int offset, enum abx500_gpio_pull_updown val)
+{
+ u8 pos;
+ int ret;
+ struct pullud *pullud;
+
+ if (!pct->soc->pullud) {
+ dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
+ __func__);
+ ret = -EPERM;
+ goto out;
+ }
+
+ pullud = pct->soc->pullud;
+
+ if ((offset < pullud->first_pin)
+ || (offset > pullud->last_pin)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ pos = offset << 1;
+
+ ret = abx500_mask_and_set_register_interruptible(pct->dev,
+ AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG,
+ AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos);
+
+out:
+ if (ret < 0)
+ dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+
+ return ret;
+}
+
+static int abx500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset,
+ int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ struct pullud *pullud = pct->soc->pullud;
+ unsigned gpio;
+ int ret;
+
+ /* set direction as output */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
+ if (ret < 0)
+ return ret;
+
+ /* disable pull down */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
+ if (ret < 0)
+ return ret;
+
+ /* if supported, disable both pull down and pull up */
+ gpio = offset + 1;
+ if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) {
+ ret = abx500_config_pull_updown(pct,
+ gpio,
+ ABX500_GPIO_PULL_NONE);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* set the output as 1 or 0 */
+ return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
+}
+
+static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ /* set the register as input */
+ return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
+}
+
+static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ /* The AB8500 GPIO numbers are off by one */
+ int gpio = offset + 1;
+ int hwirq;
+ int i;
+
+ for (i = 0; i < pct->irq_cluster_size; i++) {
+ struct abx500_gpio_irq_cluster *cluster =
+ &pct->irq_cluster[i];
+
+ if (gpio >= cluster->start && gpio <= cluster->end) {
+ /*
+ * The ABx500 GPIO's associated IRQs are clustered together
+ * throughout the interrupt numbers at irregular intervals.
+ * To solve this quandry, we have placed the read-in values
+ * into the cluster information table.
+ */
+ hwirq = gpio - cluster->start + cluster->to_irq;
+ return irq_create_mapping(pct->parent->domain, hwirq);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+ unsigned gpio, int alt_setting)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct alternate_functions af = pct->soc->alternate_functions[gpio];
+ int ret;
+ int val;
+ unsigned offset;
+
+ const char *modes[] = {
+ [ABX500_DEFAULT] = "default",
+ [ABX500_ALT_A] = "altA",
+ [ABX500_ALT_B] = "altB",
+ [ABX500_ALT_C] = "altC",
+ };
+
+ /* sanity check */
+ if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) ||
+ ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) ||
+ ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) {
+ dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio,
+ modes[alt_setting]);
+ return -EINVAL;
+ }
+
+ /* on ABx5xx, there is no GPIO0, so adjust the offset */
+ offset = gpio - 1;
+
+ switch (alt_setting) {
+ case ABX500_DEFAULT:
+ /*
+ * for ABx5xx family, default mode is always selected by
+ * writing 0 to GPIOSELx register, except for pins which
+ * support at least ALT_B mode, default mode is selected
+ * by writing 1 to GPIOSELx register
+ */
+ val = 0;
+ if (af.alt_bit1 != UNUSED)
+ val++;
+
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, val);
+ break;
+
+ case ABX500_ALT_A:
+ /*
+ * for ABx5xx family, alt_a mode is always selected by
+ * writing 1 to GPIOSELx register, except for pins which
+ * support at least ALT_B mode, alt_a mode is selected
+ * by writing 0 to GPIOSELx register and 0 in ALTFUNC
+ * register
+ */
+ if (af.alt_bit1 != UNUSED) {
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1,
+ !!(af.alta_val && BIT(0)));
+ if (af.alt_bit2 != UNUSED)
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2,
+ !!(af.alta_val && BIT(1)));
+ } else
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 1);
+ break;
+
+ case ABX500_ALT_B:
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1, !!(af.altb_val && BIT(0)));
+ if (af.alt_bit2 != UNUSED)
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2,
+ !!(af.altb_val && BIT(1)));
+ break;
+
+ case ABX500_ALT_C:
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2, !!(af.altc_val && BIT(0)));
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2, !!(af.altc_val && BIT(1)));
+ break;
+
+ default:
+ dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting);
+
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+ unsigned gpio)
+{
+ u8 mode;
+ bool bit_mode;
+ bool alt_bit1;
+ bool alt_bit2;
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct alternate_functions af = pct->soc->alternate_functions[gpio];
+ /* on ABx5xx, there is no GPIO0, so adjust the offset */
+ unsigned offset = gpio - 1;
+
+ /*
+ * if gpiosel_bit is set to unused,
+ * it means no GPIO or special case
+ */
+ if (af.gpiosel_bit == UNUSED)
+ return ABX500_DEFAULT;
+
+ /* read GpioSelx register */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
+ af.gpiosel_bit, &bit_mode);
+ mode = bit_mode;
+
+ /* sanity check */
+ if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) ||
+ (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) {
+ dev_err(pct->dev,
+ "alt_bitX value not in correct range (-1 to 7)\n");
+ return -EINVAL;
+ }
+
+ /* if alt_bit2 is used, alt_bit1 must be used too */
+ if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
+ dev_err(pct->dev,
+ "if alt_bit2 is used, alt_bit1 can't be unused\n");
+ return -EINVAL;
+ }
+
+ /* check if pin use AlternateFunction register */
+ if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
+ return mode;
+ /*
+ * if pin GPIOSEL bit is set and pin supports alternate function,
+ * it means DEFAULT mode
+ */
+ if (mode)
+ return ABX500_DEFAULT;
+
+ /*
+ * pin use the AlternatFunction register
+ * read alt_bit1 value
+ */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1, &alt_bit1);
+
+ if (af.alt_bit2 != UNUSED)
+ /* read alt_bit2 value */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2,
+ &alt_bit2);
+ else
+ alt_bit2 = 0;
+
+ mode = (alt_bit2 << 1) + alt_bit1;
+ if (mode == af.alta_val)
+ return ABX500_ALT_A;
+ else if (mode == af.altb_val)
+ return ABX500_ALT_B;
+ else
+ return ABX500_ALT_C;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/seq_file.h>
+
+static void abx500_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
+{
+ const char *label = gpiochip_is_requested(chip, offset - 1);
+ u8 gpio_offset = offset - 1;
+ int mode = -1;
+ bool is_out;
+ bool pull;
+
+ const char *modes[] = {
+ [ABX500_DEFAULT] = "default",
+ [ABX500_ALT_A] = "altA",
+ [ABX500_ALT_B] = "altB",
+ [ABX500_ALT_C] = "altC",
+ };
+
+ abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out);
+ abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull);
+
+ if (pctldev)
+ mode = abx500_get_mode(pctldev, chip, offset);
+
+ seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s",
+ gpio, label ?: "(none)",
+ is_out ? "out" : "in ",
+ is_out ?
+ (chip->get
+ ? (chip->get(chip, offset) ? "hi" : "lo")
+ : "? ")
+ : (pull ? "pull up" : "pull down"),
+ (mode < 0) ? "unknown" : modes[mode]);
+}
+
+static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ unsigned i;
+ unsigned gpio = chip->base;
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ struct pinctrl_dev *pctldev = pct->pctldev;
+
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ /* On AB8500, there is no GPIO0, the first is the GPIO 1 */
+ abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio);
+ seq_printf(s, "\n");
+ }
+}
+
+#else
+static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
+{
+}
+#define abx500_gpio_dbg_show NULL
+#endif
+
+int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ return pinctrl_request_gpio(gpio);
+}
+
+void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ pinctrl_free_gpio(gpio);
+}
+
+static struct gpio_chip abx500gpio_chip = {
+ .label = "abx500-gpio",
+ .owner = THIS_MODULE,
+ .request = abx500_gpio_request,
+ .free = abx500_gpio_free,
+ .direction_input = abx500_gpio_direction_input,
+ .get = abx500_gpio_get,
+ .direction_output = abx500_gpio_direction_output,
+ .set = abx500_gpio_set,
+ .to_irq = abx500_gpio_to_irq,
+ .dbg_show = abx500_gpio_dbg_show,
+};
+
+static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->nfunctions;
+}
+
+static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->functions[function].name;
+}
+
+static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pct->soc->functions[function].groups;
+ *num_groups = pct->soc->functions[function].ngroups;
+
+ return 0;
+}
+
+static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned group)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pct->chip;
+ const struct abx500_pingroup *g;
+ int i;
+ int ret = 0;
+
+ g = &pct->soc->groups[group];
+ if (g->altsetting < 0)
+ return -EINVAL;
+
+ dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins);
+
+ for (i = 0; i < g->npins; i++) {
+ dev_dbg(pct->dev, "setting pin %d to altsetting %d\n",
+ g->pins[i], g->altsetting);
+
+ ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
+ }
+
+ return ret;
+}
+
+static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned function, unsigned group)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ const struct abx500_pingroup *g;
+
+ g = &pct->soc->groups[group];
+ if (g->altsetting < 0)
+ return;
+
+ /* FIXME: poke out the mux, set the pin to some default state? */
+ dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
+}
+
+int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ const struct abx500_pinrange *p;
+ int ret;
+ int i;
+
+ /*
+ * Different ranges have different ways to enable GPIO function on a
+ * pin, so refer back to our local range type, where we handily define
+ * what altfunc enables GPIO for a certain pin.
+ */
+ for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
+ p = &pct->soc->gpio_ranges[i];
+ if ((offset >= p->offset) &&
+ (offset < (p->offset + p->npins)))
+ break;
+ }
+
+ if (i == pct->soc->gpio_num_ranges) {
+ dev_err(pct->dev, "%s failed to locate range\n", __func__);
+ return -ENODEV;
+ }
+
+ dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n",
+ p->altfunc, offset);
+
+ ret = abx500_set_mode(pct->pctldev, &pct->chip,
+ offset, p->altfunc);
+ if (ret < 0) {
+ dev_err(pct->dev, "%s setting altfunc failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+}
+
+static struct pinmux_ops abx500_pinmux_ops = {
+ .get_functions_count = abx500_pmx_get_funcs_cnt,
+ .get_function_name = abx500_pmx_get_func_name,
+ .get_function_groups = abx500_pmx_get_func_groups,
+ .enable = abx500_pmx_enable,
+ .disable = abx500_pmx_disable,
+ .gpio_request_enable = abx500_gpio_request_enable,
+ .gpio_disable_free = abx500_gpio_disable_free,
+};
+
+static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->ngroups;
+}
+
+static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->groups[selector].name;
+}
+
+static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pct->soc->groups[selector].pins;
+ *num_pins = pct->soc->groups[selector].npins;
+
+ return 0;
+}
+
+static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned offset)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pct->chip;
+
+ abx500_gpio_dbg_show_one(s, pctldev, chip, offset,
+ chip->base + offset - 1);
+}
+
+static struct pinctrl_ops abx500_pinctrl_ops = {
+ .get_groups_count = abx500_get_groups_cnt,
+ .get_group_name = abx500_get_group_name,
+ .get_group_pins = abx500_get_group_pins,
+ .pin_dbg_show = abx500_pin_dbg_show,
+};
+
+int abx500_pin_config_get(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config)
+{
+ return -ENOSYS;
+}
+
+int abx500_pin_config_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long config)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct pullud *pullud = pct->soc->pullud;
+ struct gpio_chip *chip = &pct->chip;
+ unsigned offset;
+ int ret;
+ enum pin_config_param param = pinconf_to_config_param(config);
+ enum pin_config_param argument = pinconf_to_config_argument(config);
+
+ dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n",
+ pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input",
+ (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") :
+ (argument ? "pull up" : "pull down"));
+
+ /* on ABx500, there is no GPIO0, so adjust the offset */
+ offset = pin - 1;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ /*
+ * if argument = 1 set the pull down
+ * else clear the pull down
+ */
+ ret = abx500_gpio_direction_input(chip, offset);
+ /*
+ * Some chips only support pull down, while some actually
+ * support both pull up and pull down. Such chips have
+ * a "pullud" range specified for the pins that support
+ * both features. If the pin is not within that range, we
+ * fall back to the old bit set that only support pull down.
+ */
+ if (pullud &&
+ pin >= pullud->first_pin &&
+ pin <= pullud->last_pin)
+ ret = abx500_config_pull_updown(pct,
+ pin,
+ argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
+ else
+ /* Chip only supports pull down */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
+ offset, argument ? 0 : 1);
+ break;
+
+ case PIN_CONFIG_OUTPUT:
+ ret = abx500_gpio_direction_output(chip, offset, argument);
+
+ break;
+
+ default:
+ dev_err(chip->dev, "illegal configuration requested\n");
+
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct pinconf_ops abx500_pinconf_ops = {
+ .pin_config_get = abx500_pin_config_get,
+ .pin_config_set = abx500_pin_config_set,
+};
+
+static struct pinctrl_desc abx500_pinctrl_desc = {
+ .name = "pinctrl-abx500",
+ .pctlops = &abx500_pinctrl_ops,
+ .pmxops = &abx500_pinmux_ops,
+ .confops = &abx500_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc)
+{
+ unsigned int lowest = 0;
+ unsigned int highest = 0;
+ unsigned int npins = 0;
+ int i;
+
+ /*
+ * Compute number of GPIOs from the last SoC gpio range descriptors
+ * These ranges may include "holes" but the GPIO number space shall
+ * still be homogeneous, so we need to detect and account for any
+ * such holes so that these are included in the number of GPIO pins.
+ */
+ for (i = 0; i < soc->gpio_num_ranges; i++) {
+ unsigned gstart;
+ unsigned gend;
+ const struct abx500_pinrange *p;
+
+ p = &soc->gpio_ranges[i];
+ gstart = p->offset;
+ gend = p->offset + p->npins - 1;
+
+ if (i == 0) {
+ /* First iteration, set start values */
+ lowest = gstart;
+ highest = gend;
+ } else {
+ if (gstart < lowest)
+ lowest = gstart;
+ if (gend > highest)
+ highest = gend;
+ }
+ }
+ /* this gives the absolute number of pins */
+ npins = highest - lowest + 1;
+ return npins;
+}
+
+static const struct of_device_id abx500_gpio_match[] = {
+ { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, },
+ { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
+ { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, },
+ { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, },
+};
+
+static int abx500_gpio_probe(struct platform_device *pdev)
+{
+ struct ab8500_platform_data *abx500_pdata =
+ dev_get_platdata(pdev->dev.parent);
+ struct abx500_gpio_platform_data *pdata = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_pinctrl *pct;
+ const struct platform_device_id *platid = platform_get_device_id(pdev);
+ unsigned int id = -1;
+ int ret, err;
+ int i;
+
+ if (abx500_pdata)
+ pdata = abx500_pdata->gpio;
+ if (!pdata) {
+ if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_device(abx500_gpio_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+ id = (unsigned long)match->data;
+ } else {
+ dev_err(&pdev->dev, "gpio dt and platform data missing\n");
+ return -ENODEV;
+ }
+ }
+
+ if (platid)
+ id = platid->driver_data;
+
+ pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl),
+ GFP_KERNEL);
+ if (pct == NULL) {
+ dev_err(&pdev->dev,
+ "failed to allocate memory for pct\n");
+ return -ENOMEM;
+ }
+
+ pct->dev = &pdev->dev;
+ pct->parent = dev_get_drvdata(pdev->dev.parent);
+ pct->chip = abx500gpio_chip;
+ pct->chip.dev = &pdev->dev;
+ pct->chip.base = pdata->gpio_base;
+ pct->chip.base = (np) ? -1 : pdata->gpio_base;
+
+ /* initialize the lock */
+ mutex_init(&pct->lock);
+
+ /* Poke in other ASIC variants here */
+ switch (id) {
+ case PINCTRL_AB8500:
+ abx500_pinctrl_ab8500_init(&pct->soc);
+ break;
+ case PINCTRL_AB8540:
+ abx500_pinctrl_ab8540_init(&pct->soc);
+ break;
+ case PINCTRL_AB9540:
+ abx500_pinctrl_ab9540_init(&pct->soc);
+ break;
+ case PINCTRL_AB8505:
+ abx500_pinctrl_ab8505_init(&pct->soc);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
+ (int) platid->driver_data);
+ mutex_destroy(&pct->lock);
+ return -EINVAL;
+ }
+
+ if (!pct->soc) {
+ dev_err(&pdev->dev, "Invalid SOC data\n");
+ mutex_destroy(&pct->lock);
+ return -EINVAL;
+ }
+
+ pct->chip.ngpio = abx500_get_gpio_num(pct->soc);
+ pct->irq_cluster = pct->soc->gpio_irq_cluster;
+ pct->irq_cluster_size = pct->soc->ngpio_irq_cluster;
+
+ ret = gpiochip_add(&pct->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+ mutex_destroy(&pct->lock);
+ return ret;
+ }
+ dev_info(&pdev->dev, "added gpiochip\n");
+
+ abx500_pinctrl_desc.pins = pct->soc->pins;
+ abx500_pinctrl_desc.npins = pct->soc->npins;
+ pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct);
+ if (!pct->pctldev) {
+ dev_err(&pdev->dev,
+ "could not register abx500 pinctrl driver\n");
+ ret = -EINVAL;
+ goto out_rem_chip;
+ }
+ dev_info(&pdev->dev, "registered pin controller\n");
+
+ /* We will handle a range of GPIO pins */
+ for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
+ const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i];
+
+ ret = gpiochip_add_pin_range(&pct->chip,
+ dev_name(&pdev->dev),
+ p->offset - 1, p->offset, p->npins);
+ if (ret < 0)
+ goto out_rem_chip;
+ }
+
+ platform_set_drvdata(pdev, pct);
+ dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n");
+
+ return 0;
+
+out_rem_chip:
+ err = gpiochip_remove(&pct->chip);
+ if (err)
+ dev_info(&pdev->dev, "failed to remove gpiochip\n");
+
+ mutex_destroy(&pct->lock);
+ return ret;
+}
+
+/**
+ * abx500_gpio_remove() - remove Ab8500-gpio driver
+ * @pdev: Platform device registered
+ */
+static int abx500_gpio_remove(struct platform_device *pdev)
+{
+ struct abx500_pinctrl *pct = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&pct->chip);
+ if (ret < 0) {
+ dev_err(pct->dev, "unable to remove gpiochip: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_destroy(&pct->lock);
+
+ return 0;
+}
+
+static const struct platform_device_id abx500_pinctrl_id[] = {
+ { "pinctrl-ab8500", PINCTRL_AB8500 },
+ { "pinctrl-ab8540", PINCTRL_AB8540 },
+ { "pinctrl-ab9540", PINCTRL_AB9540 },
+ { "pinctrl-ab8505", PINCTRL_AB8505 },
+ { },
+};
+
+static struct platform_driver abx500_gpio_driver = {
+ .driver = {
+ .name = "abx500-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = abx500_gpio_match,
+ },
+ .probe = abx500_gpio_probe,
+ .remove = abx500_gpio_remove,
+ .id_table = abx500_pinctrl_id,
+};
+
+static int __init abx500_gpio_init(void)
+{
+ return platform_driver_register(&abx500_gpio_driver);
+}
+core_initcall(abx500_gpio_init);
+
+MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
+MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO");
+MODULE_ALIAS("platform:abx500-gpio");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
new file mode 100644
index 0000000..eeca8f9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -0,0 +1,234 @@
+#ifndef PINCTRL_PINCTRL_ABx5O0_H
+#define PINCTRL_PINCTRL_ABx500_H
+
+/* Package definitions */
+#define PINCTRL_AB8500 0
+#define PINCTRL_AB8540 1
+#define PINCTRL_AB9540 2
+#define PINCTRL_AB8505 3
+
+/* pins alternate function */
+enum abx500_pin_func {
+ ABX500_DEFAULT,
+ ABX500_ALT_A,
+ ABX500_ALT_B,
+ ABX500_ALT_C,
+};
+
+/**
+ * struct abx500_function - ABx500 pinctrl mux function
+ * @name: The name of the function, exported to pinctrl core.
+ * @groups: An array of pin groups that may select this function.
+ * @ngroups: The number of entries in @groups.
+ */
+struct abx500_function {
+ const char *name;
+ const char * const *groups;
+ unsigned ngroups;
+};
+
+/**
+ * struct abx500_pingroup - describes a ABx500 pin group
+ * @name: the name of this specific pin group
+ * @pins: an array of discrete physical pins used in this group, taken
+ * from the driver-local pin enumeration space
+ * @num_pins: the number of pins in this group array, i.e. the number of
+ * elements in .pins so we can iterate over that array
+ * @altsetting: the altsetting to apply to all pins in this group to
+ * configure them to be used by a function
+ */
+struct abx500_pingroup {
+ const char *name;
+ const unsigned int *pins;
+ const unsigned npins;
+ int altsetting;
+};
+
+#define ALTERNATE_FUNCTIONS(pin, sel_bit, alt1, alt2, alta, altb, altc) \
+{ \
+ .pin_number = pin, \
+ .gpiosel_bit = sel_bit, \
+ .alt_bit1 = alt1, \
+ .alt_bit2 = alt2, \
+ .alta_val = alta, \
+ .altb_val = altb, \
+ .altc_val = altc, \
+}
+
+#define UNUSED -1
+/**
+ * struct alternate_functions
+ * @pin_number: The pin number
+ * @gpiosel_bit: Control bit in GPIOSEL register,
+ * @alt_bit1: First AlternateFunction bit used to select the
+ * alternate function
+ * @alt_bit2: Second AlternateFunction bit used to select the
+ * alternate function
+ *
+ * these 3 following fields are necessary due to none
+ * coherency on how to select the altA, altB and altC
+ * function between the ABx500 SOC family when using
+ * alternatfunc register.
+ * @alta_val: value to write in alternatfunc to select altA function
+ * @altb_val: value to write in alternatfunc to select altB function
+ * @altc_val: value to write in alternatfunc to select altC function
+ */
+struct alternate_functions {
+ unsigned pin_number;
+ s8 gpiosel_bit;
+ s8 alt_bit1;
+ s8 alt_bit2;
+ u8 alta_val;
+ u8 altb_val;
+ u8 altc_val;
+};
+
+/**
+ * struct pullud - specific pull up/down feature
+ * @first_pin: The pin number of the first pins which support
+ * specific pull up/down
+ * @last_pin: The pin number of the last pins
+ */
+struct pullud {
+ unsigned first_pin;
+ unsigned last_pin;
+};
+
+#define GPIO_IRQ_CLUSTER(a, b, c) \
+{ \
+ .start = a, \
+ .end = b, \
+ .to_irq = c, \
+}
+
+/**
+ * struct abx500_gpio_irq_cluster - indicates GPIOs which are interrupt
+ * capable
+ * @start: The pin number of the first pin interrupt capable
+ * @end: The pin number of the last pin interrupt capable
+ * @to_irq: The ABx500 GPIO's associated IRQs are clustered
+ * together throughout the interrupt numbers at irregular
+ * intervals. To solve this quandary, we will place the
+ * read-in values into the cluster information table
+ */
+
+struct abx500_gpio_irq_cluster {
+ int start;
+ int end;
+ int to_irq;
+};
+
+/**
+ * struct abx500_pinrange - map pin numbers to GPIO offsets
+ * @offset: offset into the GPIO local numberspace, incidentally
+ * identical to the offset into the local pin numberspace
+ * @npins: number of pins to map from both offsets
+ * @altfunc: altfunc setting to be used to enable GPIO on a pin in
+ * this range (may vary)
+ */
+struct abx500_pinrange {
+ unsigned int offset;
+ unsigned int npins;
+ int altfunc;
+};
+
+#define ABX500_PINRANGE(a, b, c) { .offset = a, .npins = b, .altfunc = c }
+
+/**
+ * struct abx500_pinctrl_soc_data - ABx500 pin controller per-SoC configuration
+ * @gpio_ranges: An array of GPIO ranges for this SoC
+ * @gpio_num_ranges: The number of GPIO ranges for this SoC
+ * @pins: An array describing all pins the pin controller affects.
+ * All pins which are also GPIOs must be listed first within the
+ * array, and be numbered identically to the GPIO controller's
+ * numbering.
+ * @npins: The number of entries in @pins.
+ * @functions: The functions supported on this SoC.
+ * @nfunction: The number of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The number of entries in @groups.
+ * @alternate_functions: array describing pins which supports alternate and
+ * how to set it.
+ * @pullud: array describing pins which supports pull up/down
+ * specific registers.
+ * @gpio_irq_cluster: An array of GPIO interrupt capable for this SoC
+ * @ngpio_irq_cluster: The number of GPIO inetrrupt capable for this SoC
+ * @irq_gpio_rising_offset: Interrupt offset used as base to compute specific
+ * setting strategy of the rising interrupt line
+ * @irq_gpio_falling_offset: Interrupt offset used as base to compute specific
+ * setting strategy of the falling interrupt line
+ * @irq_gpio_factor: Factor used to compute specific setting strategy of
+ * the interrupt line
+ */
+
+struct abx500_pinctrl_soc_data {
+ const struct abx500_pinrange *gpio_ranges;
+ unsigned gpio_num_ranges;
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+ const struct abx500_function *functions;
+ unsigned nfunctions;
+ const struct abx500_pingroup *groups;
+ unsigned ngroups;
+ struct alternate_functions *alternate_functions;
+ struct pullud *pullud;
+ struct abx500_gpio_irq_cluster *gpio_irq_cluster;
+ unsigned ngpio_irq_cluster;
+ int irq_gpio_rising_offset;
+ int irq_gpio_falling_offset;
+ int irq_gpio_factor;
+};
+
+#ifdef CONFIG_PINCTRL_AB8500
+
+void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PINCTRL_AB8540
+
+void abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PINCTRL_AB9540
+
+void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PINCTRL_AB8505
+
+void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#endif /* PINCTRL_PINCTRL_ABx500_H */
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
index 8ed20e8..4a0d54a 100644
--- a/drivers/pinctrl/pinctrl-falcon.c
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -170,7 +170,7 @@
static const unsigned pins_ntr8k[] = {GPIO5};
static const unsigned pins_hrst[] = {GPIO6};
static const unsigned pins_mdio[] = {GPIO7, GPIO8};
-static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11,
+static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
GPIO12, GPIO13, GPIO14};
static const unsigned pins_asc0[] = {GPIO32, GPIO33};
static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
@@ -315,6 +315,37 @@
static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
struct seq_file *s, unsigned offset)
{
+ unsigned long config;
+ struct pin_desc *desc;
+
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ int port = PORT(offset);
+
+ seq_printf(s, " (port %d) mux %d -- ", port,
+ pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset))));
+
+ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0);
+ if (!falcon_pinconf_get(pctrldev, offset, &config))
+ seq_printf(s, "pull %d ",
+ (int)LTQ_PINCONF_UNPACK_ARG(config));
+
+ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0);
+ if (!falcon_pinconf_get(pctrldev, offset, &config))
+ seq_printf(s, "drive-current %d ",
+ (int)LTQ_PINCONF_UNPACK_ARG(config));
+
+ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0);
+ if (!falcon_pinconf_get(pctrldev, offset, &config))
+ seq_printf(s, "slew-rate %d ",
+ (int)LTQ_PINCONF_UNPACK_ARG(config));
+
+ desc = pin_desc_get(pctrldev, offset);
+ if (desc) {
+ if (desc->gpio_owner)
+ seq_printf(s, " owner: %s", desc->gpio_owner);
+ } else {
+ seq_printf(s, " not registered");
+ }
}
static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
@@ -360,6 +391,8 @@
static struct ltq_pinmux_info falcon_info = {
.desc = &falcon_pctrl_desc,
.apply_mux = falcon_mux_apply,
+ .params = falcon_cfg_params,
+ .num_params = ARRAY_SIZE(falcon_cfg_params),
};
@@ -398,6 +431,9 @@
u32 avail;
int pins;
+ if (!of_device_is_available(np))
+ continue;
+
if (!ppdev) {
dev_err(&pdev->dev, "failed to find pad pdev\n");
continue;
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
index 15f501d..a703846 100644
--- a/drivers/pinctrl/pinctrl-lantiq.c
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -64,11 +64,13 @@
seq_printf(s, " %s", dev_name(pctldev->dev));
}
-static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+static void ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map)
{
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+ struct property *pins = of_find_property(np, "lantiq,pins", NULL);
+ struct property *groups = of_find_property(np, "lantiq,groups", NULL);
unsigned long configs[3];
unsigned num_configs = 0;
struct property *prop;
@@ -76,8 +78,20 @@
const char *function;
int ret, i;
+ if (!pins && !groups) {
+ dev_err(pctldev->dev, "%s defines neither pins nor groups\n",
+ np->name);
+ return;
+ }
+
+ if (pins && groups) {
+ dev_err(pctldev->dev, "%s defines both pins and groups\n",
+ np->name);
+ return;
+ }
+
ret = of_property_read_string(np, "lantiq,function", &function);
- if (!ret) {
+ if (groups && !ret) {
of_property_for_each_string(np, "lantiq,groups", prop, group) {
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->name = function;
@@ -85,11 +99,6 @@
(*map)->data.mux.function = function;
(*map)++;
}
- if (of_find_property(np, "lantiq,pins", NULL))
- dev_err(pctldev->dev,
- "%s mixes pins and groups settings\n",
- np->name);
- return 0;
}
for (i = 0; i < info->num_params; i++) {
@@ -103,7 +112,7 @@
}
if (!num_configs)
- return -EINVAL;
+ return;
of_property_for_each_string(np, "lantiq,pins", prop, pin) {
(*map)->data.configs.configs = kmemdup(configs,
@@ -115,7 +124,16 @@
(*map)->data.configs.num_configs = num_configs;
(*map)++;
}
- return 0;
+ of_property_for_each_string(np, "lantiq,groups", prop, group) {
+ (*map)->data.configs.configs = kmemdup(configs,
+ num_configs * sizeof(unsigned long),
+ GFP_KERNEL);
+ (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP;
+ (*map)->name = group;
+ (*map)->data.configs.group_or_pin = group;
+ (*map)->data.configs.num_configs = num_configs;
+ (*map)++;
+ }
}
static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
@@ -135,23 +153,19 @@
{
struct pinctrl_map *tmp;
struct device_node *np;
- int ret;
+ int max_maps = 0;
- *num_maps = 0;
for_each_child_of_node(np_config, np)
- *num_maps += ltq_pinctrl_dt_subnode_size(np);
- *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
+ max_maps += ltq_pinctrl_dt_subnode_size(np);
+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map) * 2, GFP_KERNEL);
if (!*map)
return -ENOMEM;
tmp = *map;
- for_each_child_of_node(np_config, np) {
- ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
- if (ret < 0) {
- ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps);
- return ret;
- }
- }
+ for_each_child_of_node(np_config, np)
+ ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
+ *num_maps = ((int)(tmp - *map));
+
return 0;
}
@@ -280,7 +294,7 @@
unsigned pin)
{
struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
- int mfp = match_mfp(info, pin + (range->id * 32));
+ int mfp = match_mfp(info, pin);
int pin_func;
if (mfp < 0) {
diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h
index 4419d32..6d07f02 100644
--- a/drivers/pinctrl/pinctrl-lantiq.h
+++ b/drivers/pinctrl/pinctrl-lantiq.h
@@ -34,6 +34,7 @@
LTQ_PINCONF_PARAM_OPEN_DRAIN,
LTQ_PINCONF_PARAM_DRIVE_CURRENT,
LTQ_PINCONF_PARAM_SLEW_RATE,
+ LTQ_PINCONF_PARAM_OUTPUT,
};
struct ltq_cfg_param {
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 5767b18..de9e851 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -25,6 +25,8 @@
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
@@ -32,8 +34,8 @@
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach/irq.h>
-#include <mach/irqs.h>
#include "pinctrl-nomadik.h"
+#include "core.h"
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
@@ -216,7 +218,7 @@
u32 falling = nmk_chip->fimsc & BIT(offset);
u32 rising = nmk_chip->rimsc & BIT(offset);
int gpio = nmk_chip->chip.base + offset;
- int irq = NOMADIK_GPIO_TO_IRQ(gpio);
+ int irq = irq_find_mapping(nmk_chip->domain, offset);
struct irq_data *d = irq_get_irq_data(irq);
if (!rising && !falling)
@@ -1341,8 +1343,7 @@
if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
dev_err(&dev->dev, "gpio-bank property not found\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
@@ -1350,41 +1351,29 @@
}
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto out;
- }
+ if (!res)
+ return -ENOENT;
irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- ret = irq;
- goto out;
- }
+ if (irq < 0)
+ return irq;
secondary_irq = platform_get_irq(dev, 1);
- if (secondary_irq >= 0 && !pdata->get_secondary_status) {
- ret = -EINVAL;
- goto out;
- }
+ if (secondary_irq >= 0 && !pdata->get_secondary_status)
+ return -EINVAL;
base = devm_request_and_ioremap(&dev->dev, res);
- if (!base) {
- ret = -ENOMEM;
- goto out;
- }
+ if (!base)
+ return -ENOMEM;
clk = devm_clk_get(&dev->dev, NULL);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- goto out;
- }
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
clk_prepare(clk);
nmk_chip = devm_kzalloc(&dev->dev, sizeof(*nmk_chip), GFP_KERNEL);
- if (!nmk_chip) {
- ret = -ENOMEM;
- goto out;
- }
+ if (!nmk_chip)
+ return -ENOMEM;
/*
* The virt address in nmk_chip->addr is in the nomadik register space,
@@ -1418,7 +1407,7 @@
ret = gpiochip_add(&nmk_chip->chip);
if (ret)
- goto out;
+ return ret;
BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
@@ -1427,14 +1416,15 @@
platform_set_drvdata(dev, nmk_chip);
if (!np)
- irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
+ irq_start = pdata->first_irq;
nmk_chip->domain = irq_domain_add_simple(np,
NMK_GPIO_PER_CHIP, irq_start,
&nmk_gpio_irq_simple_ops, nmk_chip);
if (!nmk_chip->domain) {
dev_err(&dev->dev, "failed to create irqdomain\n");
- ret = -ENOSYS;
- goto out;
+ /* Just do this, no matter if it fails */
+ ret = gpiochip_remove(&nmk_chip->chip);
+ return -ENOSYS;
}
nmk_gpio_init_irq(nmk_chip);
@@ -1442,12 +1432,6 @@
dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
return 0;
-
-out:
- dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
- pdata->first_gpio, pdata->first_gpio+31);
-
- return ret;
}
static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev)
@@ -1508,11 +1492,285 @@
nmk_gpio_dbg_show_one(s, pctldev, chip, offset - chip->base, offset);
}
+static void nmk_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(map[i].data.configs.configs);
+ kfree(map);
+}
+
+static int nmk_dt_reserve_map(struct pinctrl_map **map, unsigned *reserved_maps,
+ unsigned *num_maps, unsigned reserve)
+{
+ unsigned old_num = *reserved_maps;
+ unsigned new_num = *num_maps + reserve;
+ struct pinctrl_map *new_map;
+
+ if (old_num >= new_num)
+ return 0;
+
+ new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
+ if (!new_map)
+ return -ENOMEM;
+
+ memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
+
+ *map = new_map;
+ *reserved_maps = new_num;
+
+ return 0;
+}
+
+static int nmk_dt_add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps,
+ unsigned *num_maps, const char *group,
+ const char *function)
+{
+ if (*num_maps == *reserved_maps)
+ return -ENOSPC;
+
+ (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)[*num_maps].data.mux.group = group;
+ (*map)[*num_maps].data.mux.function = function;
+ (*num_maps)++;
+
+ return 0;
+}
+
+static int nmk_dt_add_map_configs(struct pinctrl_map **map,
+ unsigned *reserved_maps,
+ unsigned *num_maps, const char *group,
+ unsigned long *configs, unsigned num_configs)
+{
+ unsigned long *dup_configs;
+
+ if (*num_maps == *reserved_maps)
+ return -ENOSPC;
+
+ dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
+ GFP_KERNEL);
+ if (!dup_configs)
+ return -ENOMEM;
+
+ (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN;
+
+ (*map)[*num_maps].data.configs.group_or_pin = group;
+ (*map)[*num_maps].data.configs.configs = dup_configs;
+ (*map)[*num_maps].data.configs.num_configs = num_configs;
+ (*num_maps)++;
+
+ return 0;
+}
+
+#define NMK_CONFIG_PIN(x,y) { .property = x, .config = y, }
+#define NMK_CONFIG_PIN_ARRAY(x,y) { .property = x, .choice = y, \
+ .size = ARRAY_SIZE(y), }
+
+static const unsigned long nmk_pin_input_modes[] = {
+ PIN_INPUT_NOPULL,
+ PIN_INPUT_PULLUP,
+ PIN_INPUT_PULLDOWN,
+};
+
+static const unsigned long nmk_pin_output_modes[] = {
+ PIN_OUTPUT_LOW,
+ PIN_OUTPUT_HIGH,
+ PIN_DIR_OUTPUT,
+};
+
+static const unsigned long nmk_pin_sleep_modes[] = {
+ PIN_SLEEPMODE_DISABLED,
+ PIN_SLEEPMODE_ENABLED,
+};
+
+static const unsigned long nmk_pin_sleep_input_modes[] = {
+ PIN_SLPM_INPUT_NOPULL,
+ PIN_SLPM_INPUT_PULLUP,
+ PIN_SLPM_INPUT_PULLDOWN,
+ PIN_SLPM_DIR_INPUT,
+};
+
+static const unsigned long nmk_pin_sleep_output_modes[] = {
+ PIN_SLPM_OUTPUT_LOW,
+ PIN_SLPM_OUTPUT_HIGH,
+ PIN_SLPM_DIR_OUTPUT,
+};
+
+static const unsigned long nmk_pin_sleep_wakeup_modes[] = {
+ PIN_SLPM_WAKEUP_DISABLE,
+ PIN_SLPM_WAKEUP_ENABLE,
+};
+
+static const unsigned long nmk_pin_gpio_modes[] = {
+ PIN_GPIOMODE_DISABLED,
+ PIN_GPIOMODE_ENABLED,
+};
+
+static const unsigned long nmk_pin_sleep_pdis_modes[] = {
+ PIN_SLPM_PDIS_DISABLED,
+ PIN_SLPM_PDIS_ENABLED,
+};
+
+struct nmk_cfg_param {
+ const char *property;
+ unsigned long config;
+ const unsigned long *choice;
+ int size;
+};
+
+static const struct nmk_cfg_param nmk_cfg_params[] = {
+ NMK_CONFIG_PIN_ARRAY("ste,input", nmk_pin_input_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,output", nmk_pin_output_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,sleep", nmk_pin_sleep_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,sleep-input", nmk_pin_sleep_input_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,sleep-output", nmk_pin_sleep_output_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,sleep-wakeup", nmk_pin_sleep_wakeup_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,gpio", nmk_pin_gpio_modes),
+ NMK_CONFIG_PIN_ARRAY("ste,sleep-pull-disable", nmk_pin_sleep_pdis_modes),
+};
+
+static int nmk_dt_pin_config(int index, int val, unsigned long *config)
+{
+ int ret = 0;
+
+ if (nmk_cfg_params[index].choice == NULL)
+ *config = nmk_cfg_params[index].config;
+ else {
+ /* test if out of range */
+ if (val < nmk_cfg_params[index].size) {
+ *config = nmk_cfg_params[index].config |
+ nmk_cfg_params[index].choice[val];
+ }
+ }
+ return ret;
+}
+
+static const char *nmk_find_pin_name(struct pinctrl_dev *pctldev, const char *pin_name)
+{
+ int i, pin_number;
+ struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+ if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1)
+ for (i = 0; i < npct->soc->npins; i++)
+ if (npct->soc->pins[i].number == pin_number)
+ return npct->soc->pins[i].name;
+ return NULL;
+}
+
+static bool nmk_pinctrl_dt_get_config(struct device_node *np,
+ unsigned long *configs)
+{
+ bool has_config = 0;
+ unsigned long cfg = 0;
+ int i, val, ret;
+
+ for (i = 0; i < ARRAY_SIZE(nmk_cfg_params); i++) {
+ ret = of_property_read_u32(np,
+ nmk_cfg_params[i].property, &val);
+ if (ret != -EINVAL) {
+ if (nmk_dt_pin_config(i, val, &cfg) == 0) {
+ *configs |= cfg;
+ has_config = 1;
+ }
+ }
+ }
+
+ return has_config;
+}
+
+int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *reserved_maps,
+ unsigned *num_maps)
+{
+ int ret;
+ const char *function = NULL;
+ unsigned long configs = 0;
+ bool has_config = 0;
+ unsigned reserve = 0;
+ struct property *prop;
+ const char *group, *gpio_name;
+ struct device_node *np_config;
+
+ ret = of_property_read_string(np, "ste,function", &function);
+ if (ret >= 0)
+ reserve = 1;
+
+ has_config = nmk_pinctrl_dt_get_config(np, &configs);
+
+ np_config = of_parse_phandle(np, "ste,config", 0);
+ if (np_config)
+ has_config |= nmk_pinctrl_dt_get_config(np_config, &configs);
+
+ ret = of_property_count_strings(np, "ste,pins");
+ if (ret < 0)
+ goto exit;
+
+ if (has_config)
+ reserve++;
+
+ reserve *= ret;
+
+ ret = nmk_dt_reserve_map(map, reserved_maps, num_maps, reserve);
+ if (ret < 0)
+ goto exit;
+
+ of_property_for_each_string(np, "ste,pins", prop, group) {
+ if (function) {
+ ret = nmk_dt_add_map_mux(map, reserved_maps, num_maps,
+ group, function);
+ if (ret < 0)
+ goto exit;
+ }
+ if (has_config) {
+ gpio_name = nmk_find_pin_name(pctldev, group);
+
+ ret = nmk_dt_add_map_configs(map, reserved_maps, num_maps,
+ gpio_name, &configs, 1);
+ if (ret < 0)
+ goto exit;
+ }
+
+ }
+exit:
+ return ret;
+}
+
+int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ unsigned reserved_maps;
+ struct device_node *np;
+ int ret;
+
+ reserved_maps = 0;
+ *map = NULL;
+ *num_maps = 0;
+
+ for_each_child_of_node(np_config, np) {
+ ret = nmk_pinctrl_dt_subnode_to_map(pctldev, np, map,
+ &reserved_maps, num_maps);
+ if (ret < 0) {
+ nmk_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static struct pinctrl_ops nmk_pinctrl_ops = {
.get_groups_count = nmk_get_groups_cnt,
.get_group_name = nmk_get_group_name,
.get_group_pins = nmk_get_group_pins,
.pin_dbg_show = nmk_pin_dbg_show,
+ .dt_node_to_map = nmk_pinctrl_dt_node_to_map,
+ .dt_free_map = nmk_pinctrl_dt_free_map,
};
static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
@@ -1846,16 +2104,39 @@
static const struct of_device_id nmk_pinctrl_match[] = {
{
- .compatible = "stericsson,nmk_pinctrl",
+ .compatible = "stericsson,nmk-pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},
{},
};
+static int nmk_pinctrl_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct nmk_pinctrl *npct;
+
+ npct = platform_get_drvdata(pdev);
+ if (!npct)
+ return -EINVAL;
+
+ return pinctrl_force_sleep(npct->pctl);
+}
+
+static int nmk_pinctrl_resume(struct platform_device *pdev)
+{
+ struct nmk_pinctrl *npct;
+
+ npct = platform_get_drvdata(pdev);
+ if (!npct)
+ return -EINVAL;
+
+ return pinctrl_force_default(npct->pctl);
+}
+
static int nmk_pinctrl_probe(struct platform_device *pdev)
{
const struct platform_device_id *platid = platform_get_device_id(pdev);
struct device_node *np = pdev->dev.of_node;
+ struct device_node *prcm_np;
struct nmk_pinctrl *npct;
struct resource *res;
unsigned int version = 0;
@@ -1884,21 +2165,26 @@
if (version == PINCTRL_NMK_DB8540)
nmk_pinctrl_db8540_init(&npct->soc);
+ if (np) {
+ prcm_np = of_parse_phandle(np, "prcm", 0);
+ if (prcm_np)
+ npct->prcm_base = of_iomap(prcm_np, 0);
+ }
+
+ /* Allow platform passed information to over-write DT. */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res) {
+ if (res)
npct->prcm_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
- if (!npct->prcm_base) {
- dev_err(&pdev->dev,
- "failed to ioremap PRCM registers\n");
- return -ENOMEM;
+ if (!npct->prcm_base) {
+ if (version == PINCTRL_NMK_STN8815) {
+ dev_info(&pdev->dev,
+ "No PRCM base, "
+ "assuming no ALT-Cx control is available\n");
+ } else {
+ dev_err(&pdev->dev, "missing PRCM base address\n");
+ return -EINVAL;
}
- } else if (version == PINCTRL_NMK_STN8815) {
- dev_info(&pdev->dev,
- "No PRCM base, assume no ALT-Cx control is available\n");
- } else {
- dev_err(&pdev->dev, "missing PRCM base address\n");
- return -EINVAL;
}
/*
@@ -1963,6 +2249,10 @@
},
.probe = nmk_pinctrl_probe,
.id_table = nmk_pinctrl_id,
+#ifdef CONFIG_PM
+ .suspend = nmk_pinctrl_suspend,
+ .resume = nmk_pinctrl_resume,
+#endif
};
static int __init nmk_gpio_init(void)
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index fd7b24c..5c20ed0 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -716,7 +716,6 @@
}
ctrldesc->pins = pindesc;
ctrldesc->npins = drvdata->ctrl->nr_pins;
- ctrldesc->npins = drvdata->ctrl->nr_pins;
/* dynamically populate the pin number and pin name for pindesc */
for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
new file mode 100644
index 0000000..80b11e3
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -0,0 +1,1505 @@
+/*
+ * Allwinner A1X SoCs pinctrl driver.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun4i_a10_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* RX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* RTS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* CTS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* DTR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* DSR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* DCD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* RING */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB22,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart0")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB23,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart0")), /* RX */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC22,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC23,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC24,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart0")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart0")), /* RX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH23,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH24,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH25,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH26,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PH27,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PI21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+};
+
+static const struct sunxi_desc_pin sun5i_a13_pins[] = {
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* RX */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x4, "uart1")), /* RX */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG12,
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+};
+
+static const struct sunxi_pinctrl_desc sun4i_a10_pinctrl_data = {
+ .pins = sun4i_a10_pins,
+ .npins = ARRAY_SIZE(sun4i_a10_pins),
+};
+
+static const struct sunxi_pinctrl_desc sun5i_a13_pinctrl_data = {
+ .pins = sun5i_a13_pins,
+ .npins = ARRAY_SIZE(sun5i_a13_pins),
+};
+
+static struct sunxi_pinctrl_group *
+sunxi_pinctrl_find_group_by_name(struct sunxi_pinctrl *pctl, const char *group)
+{
+ int i;
+
+ for (i = 0; i < pctl->ngroups; i++) {
+ struct sunxi_pinctrl_group *grp = pctl->groups + i;
+
+ if (!strcmp(grp->name, group))
+ return grp;
+ }
+
+ return NULL;
+}
+
+static struct sunxi_pinctrl_function *
+sunxi_pinctrl_find_function_by_name(struct sunxi_pinctrl *pctl,
+ const char *name)
+{
+ struct sunxi_pinctrl_function *func = pctl->functions;
+ int i;
+
+ for (i = 0; i < pctl->nfunctions; i++) {
+ if (!func[i].name)
+ break;
+
+ if (!strcmp(func[i].name, name))
+ return func + i;
+ }
+
+ return NULL;
+}
+
+static struct sunxi_desc_function *
+sunxi_pinctrl_desc_find_function_by_name(struct sunxi_pinctrl *pctl,
+ const char *pin_name,
+ const char *func_name)
+{
+ int i;
+
+ for (i = 0; i < pctl->desc->npins; i++) {
+ const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+
+ if (!strcmp(pin->pin.name, pin_name)) {
+ struct sunxi_desc_function *func = pin->functions;
+
+ while (func->name) {
+ if (!strcmp(func->name, func_name))
+ return func;
+
+ func++;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+static int sunxi_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->ngroups;
+}
+
+static const char *sunxi_pctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->groups[group].name;
+}
+
+static int sunxi_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = (unsigned *)&pctl->groups[group].pin;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *node,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ unsigned long *pinconfig;
+ struct property *prop;
+ const char *function;
+ const char *group;
+ int ret, nmaps, i = 0;
+ u32 val;
+
+ *map = NULL;
+ *num_maps = 0;
+
+ ret = of_property_read_string(node, "allwinner,function", &function);
+ if (ret) {
+ dev_err(pctl->dev,
+ "missing allwinner,function property in node %s\n",
+ node->name);
+ return -EINVAL;
+ }
+
+ nmaps = of_property_count_strings(node, "allwinner,pins") * 2;
+ if (nmaps < 0) {
+ dev_err(pctl->dev,
+ "missing allwinner,pins property in node %s\n",
+ node->name);
+ return -EINVAL;
+ }
+
+ *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
+ if (!map)
+ return -ENOMEM;
+
+ of_property_for_each_string(node, "allwinner,pins", prop, group) {
+ struct sunxi_pinctrl_group *grp =
+ sunxi_pinctrl_find_group_by_name(pctl, group);
+ int j = 0, configlen = 0;
+
+ if (!grp) {
+ dev_err(pctl->dev, "unknown pin %s", group);
+ continue;
+ }
+
+ if (!sunxi_pinctrl_desc_find_function_by_name(pctl,
+ grp->name,
+ function)) {
+ dev_err(pctl->dev, "unsupported function %s on pin %s",
+ function, group);
+ continue;
+ }
+
+ (*map)[i].type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)[i].data.mux.group = group;
+ (*map)[i].data.mux.function = function;
+
+ i++;
+
+ (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+ (*map)[i].data.configs.group_or_pin = group;
+
+ if (of_find_property(node, "allwinner,drive", NULL))
+ configlen++;
+ if (of_find_property(node, "allwinner,pull", NULL))
+ configlen++;
+
+ pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
+
+ if (!of_property_read_u32(node, "allwinner,drive", &val)) {
+ u16 strength = (val + 1) * 10;
+ pinconfig[j++] =
+ pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
+ strength);
+ }
+
+ if (!of_property_read_u32(node, "allwinner,pull", &val)) {
+ enum pin_config_param pull = PIN_CONFIG_END;
+ if (val == 1)
+ pull = PIN_CONFIG_BIAS_PULL_UP;
+ else if (val == 2)
+ pull = PIN_CONFIG_BIAS_PULL_DOWN;
+ pinconfig[j++] = pinconf_to_config_packed(pull, 0);
+ }
+
+ (*map)[i].data.configs.configs = pinconfig;
+ (*map)[i].data.configs.num_configs = configlen;
+
+ i++;
+ }
+
+ *num_maps = nmaps;
+
+ return 0;
+}
+
+static void sunxi_pctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map,
+ unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++) {
+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+ kfree(map[i].data.configs.configs);
+ }
+
+ kfree(map);
+}
+
+static struct pinctrl_ops sunxi_pctrl_ops = {
+ .dt_node_to_map = sunxi_pctrl_dt_node_to_map,
+ .dt_free_map = sunxi_pctrl_dt_free_map,
+ .get_groups_count = sunxi_pctrl_get_groups_count,
+ .get_group_name = sunxi_pctrl_get_group_name,
+ .get_group_pins = sunxi_pctrl_get_group_pins,
+};
+
+static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned group,
+ unsigned long *config)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *config = pctl->groups[group].config;
+
+ return 0;
+}
+
+static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group,
+ unsigned long config)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct sunxi_pinctrl_group *g = &pctl->groups[group];
+ u32 val, mask;
+ u16 strength;
+ u8 dlevel;
+
+ switch (pinconf_to_config_param(config)) {
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ strength = pinconf_to_config_argument(config);
+ if (strength > 40)
+ return -EINVAL;
+ /*
+ * We convert from mA to what the register expects:
+ * 0: 10mA
+ * 1: 20mA
+ * 2: 30mA
+ * 3: 40mA
+ */
+ dlevel = strength / 10 - 1;
+ val = readl(pctl->membase + sunxi_dlevel_reg(g->pin));
+ mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin);
+ writel((val & ~mask) | dlevel << sunxi_dlevel_offset(g->pin),
+ pctl->membase + sunxi_dlevel_reg(g->pin));
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ val = readl(pctl->membase + sunxi_pull_reg(g->pin));
+ mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
+ writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin),
+ pctl->membase + sunxi_pull_reg(g->pin));
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ val = readl(pctl->membase + sunxi_pull_reg(g->pin));
+ mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
+ writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin),
+ pctl->membase + sunxi_pull_reg(g->pin));
+ break;
+ default:
+ break;
+ }
+
+ /* cache the config value */
+ g->config = config;
+
+ return 0;
+}
+
+static struct pinconf_ops sunxi_pconf_ops = {
+ .pin_config_group_get = sunxi_pconf_group_get,
+ .pin_config_group_set = sunxi_pconf_group_set,
+};
+
+static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->nfunctions;
+}
+
+static const char *sunxi_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->functions[function].name;
+}
+
+static int sunxi_pmx_get_func_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pctl->functions[function].groups;
+ *num_groups = pctl->functions[function].ngroups;
+
+ return 0;
+}
+
+static void sunxi_pmx_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ u8 config)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ u32 val = readl(pctl->membase + sunxi_mux_reg(pin));
+ u32 mask = MUX_PINS_MASK << sunxi_mux_offset(pin);
+ writel((val & ~mask) | config << sunxi_mux_offset(pin),
+ pctl->membase + sunxi_mux_reg(pin));
+}
+
+static int sunxi_pmx_enable(struct pinctrl_dev *pctldev,
+ unsigned function,
+ unsigned group)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct sunxi_pinctrl_group *g = pctl->groups + group;
+ struct sunxi_pinctrl_function *func = pctl->functions + function;
+ struct sunxi_desc_function *desc =
+ sunxi_pinctrl_desc_find_function_by_name(pctl,
+ g->name,
+ func->name);
+
+ if (!desc)
+ return -EINVAL;
+
+ sunxi_pmx_set(pctldev, g->pin, desc->muxval);
+
+ return 0;
+}
+
+static int
+sunxi_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct sunxi_desc_function *desc;
+ char pin_name[SUNXI_PIN_NAME_MAX_LEN];
+ const char *func;
+ u8 bank, pin;
+ int ret;
+
+ bank = (offset) / PINS_PER_BANK;
+ pin = (offset) % PINS_PER_BANK;
+
+ ret = sprintf(pin_name, "P%c%d", 'A' + bank, pin);
+ if (!ret)
+ goto error;
+
+ if (input)
+ func = "gpio_in";
+ else
+ func = "gpio_out";
+
+ desc = sunxi_pinctrl_desc_find_function_by_name(pctl,
+ pin_name,
+ func);
+ if (!desc) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ sunxi_pmx_set(pctldev, offset, desc->muxval);
+
+ ret = 0;
+
+error:
+ return ret;
+}
+
+static struct pinmux_ops sunxi_pmx_ops = {
+ .get_functions_count = sunxi_pmx_get_funcs_cnt,
+ .get_function_name = sunxi_pmx_get_func_name,
+ .get_function_groups = sunxi_pmx_get_func_groups,
+ .enable = sunxi_pmx_enable,
+ .gpio_set_direction = sunxi_pmx_gpio_set_direction,
+};
+
+static struct pinctrl_desc sunxi_pctrl_desc = {
+ .confops = &sunxi_pconf_ops,
+ .pctlops = &sunxi_pctrl_ops,
+ .pmxops = &sunxi_pmx_ops,
+};
+
+static int sunxi_pinctrl_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void sunxi_pinctrl_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int sunxi_pinctrl_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev);
+
+ u32 reg = sunxi_data_reg(offset);
+ u8 index = sunxi_data_offset(offset);
+ u32 val = (readl(pctl->membase + reg) >> index) & DATA_PINS_MASK;
+
+ return val;
+}
+
+static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev);
+ u32 reg = sunxi_data_reg(offset);
+ u8 index = sunxi_data_offset(offset);
+
+ writel((value & DATA_PINS_MASK) << index, pctl->membase + reg);
+}
+
+static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec,
+ u32 *flags)
+{
+ int pin, base;
+
+ base = PINS_PER_BANK * gpiospec->args[0];
+ pin = base + gpiospec->args[1];
+
+ if (pin > (gc->base + gc->ngpio))
+ return -EINVAL;
+
+ if (flags)
+ *flags = gpiospec->args[2];
+
+ return pin;
+}
+
+static struct gpio_chip sunxi_pinctrl_gpio_chip = {
+ .owner = THIS_MODULE,
+ .request = sunxi_pinctrl_gpio_request,
+ .free = sunxi_pinctrl_gpio_free,
+ .direction_input = sunxi_pinctrl_gpio_direction_input,
+ .direction_output = sunxi_pinctrl_gpio_direction_output,
+ .get = sunxi_pinctrl_gpio_get,
+ .set = sunxi_pinctrl_gpio_set,
+ .of_xlate = sunxi_pinctrl_gpio_of_xlate,
+ .of_gpio_n_cells = 3,
+ .can_sleep = 0,
+};
+
+static struct of_device_id sunxi_pinctrl_match[] = {
+ { .compatible = "allwinner,sun4i-a10-pinctrl", .data = (void *)&sun4i_a10_pinctrl_data },
+ { .compatible = "allwinner,sun5i-a13-pinctrl", .data = (void *)&sun5i_a13_pinctrl_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sunxi_pinctrl_match);
+
+static int sunxi_pinctrl_add_function(struct sunxi_pinctrl *pctl,
+ const char *name)
+{
+ struct sunxi_pinctrl_function *func = pctl->functions;
+
+ while (func->name) {
+ /* function already there */
+ if (strcmp(func->name, name) == 0) {
+ func->ngroups++;
+ return -EEXIST;
+ }
+ func++;
+ }
+
+ func->name = name;
+ func->ngroups = 1;
+
+ pctl->nfunctions++;
+
+ return 0;
+}
+
+static int sunxi_pinctrl_build_state(struct platform_device *pdev)
+{
+ struct sunxi_pinctrl *pctl = platform_get_drvdata(pdev);
+ int i;
+
+ pctl->ngroups = pctl->desc->npins;
+
+ /* Allocate groups */
+ pctl->groups = devm_kzalloc(&pdev->dev,
+ pctl->ngroups * sizeof(*pctl->groups),
+ GFP_KERNEL);
+ if (!pctl->groups)
+ return -ENOMEM;
+
+ for (i = 0; i < pctl->desc->npins; i++) {
+ const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+ struct sunxi_pinctrl_group *group = pctl->groups + i;
+
+ group->name = pin->pin.name;
+ group->pin = pin->pin.number;
+ }
+
+ /*
+ * We suppose that we won't have any more functions than pins,
+ * we'll reallocate that later anyway
+ */
+ pctl->functions = devm_kzalloc(&pdev->dev,
+ pctl->desc->npins * sizeof(*pctl->functions),
+ GFP_KERNEL);
+ if (!pctl->functions)
+ return -ENOMEM;
+
+ /* Count functions and their associated groups */
+ for (i = 0; i < pctl->desc->npins; i++) {
+ const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+ struct sunxi_desc_function *func = pin->functions;
+
+ while (func->name) {
+ sunxi_pinctrl_add_function(pctl, func->name);
+ func++;
+ }
+ }
+
+ pctl->functions = krealloc(pctl->functions,
+ pctl->nfunctions * sizeof(*pctl->functions),
+ GFP_KERNEL);
+
+ for (i = 0; i < pctl->desc->npins; i++) {
+ const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+ struct sunxi_desc_function *func = pin->functions;
+
+ while (func->name) {
+ struct sunxi_pinctrl_function *func_item;
+ const char **func_grp;
+
+ func_item = sunxi_pinctrl_find_function_by_name(pctl,
+ func->name);
+ if (!func_item)
+ return -EINVAL;
+
+ if (!func_item->groups) {
+ func_item->groups =
+ devm_kzalloc(&pdev->dev,
+ func_item->ngroups * sizeof(*func_item->groups),
+ GFP_KERNEL);
+ if (!func_item->groups)
+ return -ENOMEM;
+ }
+
+ func_grp = func_item->groups;
+ while (*func_grp)
+ func_grp++;
+
+ *func_grp = pin->pin.name;
+ func++;
+ }
+ }
+
+ return 0;
+}
+
+static int sunxi_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *device;
+ struct pinctrl_pin_desc *pins;
+ struct sunxi_pinctrl *pctl;
+ int i, ret, last_pin;
+
+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
+ if (!pctl)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, pctl);
+
+ pctl->membase = of_iomap(node, 0);
+ if (!pctl->membase)
+ return -ENOMEM;
+
+ device = of_match_device(sunxi_pinctrl_match, &pdev->dev);
+ if (!device)
+ return -ENODEV;
+
+ pctl->desc = (struct sunxi_pinctrl_desc *)device->data;
+
+ ret = sunxi_pinctrl_build_state(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "dt probe failed: %d\n", ret);
+ return ret;
+ }
+
+ pins = devm_kzalloc(&pdev->dev,
+ pctl->desc->npins * sizeof(*pins),
+ GFP_KERNEL);
+ if (!pins)
+ return -ENOMEM;
+
+ for (i = 0; i < pctl->desc->npins; i++)
+ pins[i] = pctl->desc->pins[i].pin;
+
+ sunxi_pctrl_desc.name = dev_name(&pdev->dev);
+ sunxi_pctrl_desc.owner = THIS_MODULE;
+ sunxi_pctrl_desc.pins = pins;
+ sunxi_pctrl_desc.npins = pctl->desc->npins;
+ pctl->dev = &pdev->dev;
+ pctl->pctl_dev = pinctrl_register(&sunxi_pctrl_desc,
+ &pdev->dev, pctl);
+ if (!pctl->pctl_dev) {
+ dev_err(&pdev->dev, "couldn't register pinctrl driver\n");
+ return -EINVAL;
+ }
+
+ pctl->chip = devm_kzalloc(&pdev->dev, sizeof(*pctl->chip), GFP_KERNEL);
+ if (!pctl->chip) {
+ ret = -ENOMEM;
+ goto pinctrl_error;
+ }
+
+ last_pin = pctl->desc->pins[pctl->desc->npins - 1].pin.number;
+ pctl->chip = &sunxi_pinctrl_gpio_chip;
+ pctl->chip->ngpio = round_up(last_pin, PINS_PER_BANK);
+ pctl->chip->label = dev_name(&pdev->dev);
+ pctl->chip->dev = &pdev->dev;
+ pctl->chip->base = 0;
+
+ ret = gpiochip_add(pctl->chip);
+ if (ret)
+ goto pinctrl_error;
+
+ for (i = 0; i < pctl->desc->npins; i++) {
+ const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+
+ ret = gpiochip_add_pin_range(pctl->chip, dev_name(&pdev->dev),
+ pin->pin.number,
+ pin->pin.number, 1);
+ if (ret)
+ goto gpiochip_error;
+ }
+
+ dev_info(&pdev->dev, "initialized sunXi PIO driver\n");
+
+ return 0;
+
+gpiochip_error:
+ ret = gpiochip_remove(pctl->chip);
+pinctrl_error:
+ pinctrl_unregister(pctl->pctl_dev);
+ return ret;
+}
+
+static struct platform_driver sunxi_pinctrl_driver = {
+ .probe = sunxi_pinctrl_probe,
+ .driver = {
+ .name = "sunxi-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_pinctrl_match,
+ },
+};
+module_platform_driver(sunxi_pinctrl_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("Allwinner A1X pinctrl driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-sunxi.h b/drivers/pinctrl/pinctrl-sunxi.h
new file mode 100644
index 0000000..e921621
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-sunxi.h
@@ -0,0 +1,478 @@
+/*
+ * Allwinner A1X SoCs pinctrl driver.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PINCTRL_SUNXI_H
+#define __PINCTRL_SUNXI_H
+
+#include <linux/kernel.h>
+
+#define PA_BASE 0
+#define PB_BASE 32
+#define PC_BASE 64
+#define PD_BASE 96
+#define PE_BASE 128
+#define PF_BASE 160
+#define PG_BASE 192
+#define PH_BASE 224
+#define PI_BASE 256
+
+#define SUNXI_PINCTRL_PIN_PA0 PINCTRL_PIN(PA_BASE + 0, "PA0")
+#define SUNXI_PINCTRL_PIN_PA1 PINCTRL_PIN(PA_BASE + 1, "PA1")
+#define SUNXI_PINCTRL_PIN_PA2 PINCTRL_PIN(PA_BASE + 2, "PA2")
+#define SUNXI_PINCTRL_PIN_PA3 PINCTRL_PIN(PA_BASE + 3, "PA3")
+#define SUNXI_PINCTRL_PIN_PA4 PINCTRL_PIN(PA_BASE + 4, "PA4")
+#define SUNXI_PINCTRL_PIN_PA5 PINCTRL_PIN(PA_BASE + 5, "PA5")
+#define SUNXI_PINCTRL_PIN_PA6 PINCTRL_PIN(PA_BASE + 6, "PA6")
+#define SUNXI_PINCTRL_PIN_PA7 PINCTRL_PIN(PA_BASE + 7, "PA7")
+#define SUNXI_PINCTRL_PIN_PA8 PINCTRL_PIN(PA_BASE + 8, "PA8")
+#define SUNXI_PINCTRL_PIN_PA9 PINCTRL_PIN(PA_BASE + 9, "PA9")
+#define SUNXI_PINCTRL_PIN_PA10 PINCTRL_PIN(PA_BASE + 10, "PA10")
+#define SUNXI_PINCTRL_PIN_PA11 PINCTRL_PIN(PA_BASE + 11, "PA11")
+#define SUNXI_PINCTRL_PIN_PA12 PINCTRL_PIN(PA_BASE + 12, "PA12")
+#define SUNXI_PINCTRL_PIN_PA13 PINCTRL_PIN(PA_BASE + 13, "PA13")
+#define SUNXI_PINCTRL_PIN_PA14 PINCTRL_PIN(PA_BASE + 14, "PA14")
+#define SUNXI_PINCTRL_PIN_PA15 PINCTRL_PIN(PA_BASE + 15, "PA15")
+#define SUNXI_PINCTRL_PIN_PA16 PINCTRL_PIN(PA_BASE + 16, "PA16")
+#define SUNXI_PINCTRL_PIN_PA17 PINCTRL_PIN(PA_BASE + 17, "PA17")
+#define SUNXI_PINCTRL_PIN_PA18 PINCTRL_PIN(PA_BASE + 18, "PA18")
+#define SUNXI_PINCTRL_PIN_PA19 PINCTRL_PIN(PA_BASE + 19, "PA19")
+#define SUNXI_PINCTRL_PIN_PA20 PINCTRL_PIN(PA_BASE + 20, "PA20")
+#define SUNXI_PINCTRL_PIN_PA21 PINCTRL_PIN(PA_BASE + 21, "PA21")
+#define SUNXI_PINCTRL_PIN_PA22 PINCTRL_PIN(PA_BASE + 22, "PA22")
+#define SUNXI_PINCTRL_PIN_PA23 PINCTRL_PIN(PA_BASE + 23, "PA23")
+#define SUNXI_PINCTRL_PIN_PA24 PINCTRL_PIN(PA_BASE + 24, "PA24")
+#define SUNXI_PINCTRL_PIN_PA25 PINCTRL_PIN(PA_BASE + 25, "PA25")
+#define SUNXI_PINCTRL_PIN_PA26 PINCTRL_PIN(PA_BASE + 26, "PA26")
+#define SUNXI_PINCTRL_PIN_PA27 PINCTRL_PIN(PA_BASE + 27, "PA27")
+#define SUNXI_PINCTRL_PIN_PA28 PINCTRL_PIN(PA_BASE + 28, "PA28")
+#define SUNXI_PINCTRL_PIN_PA29 PINCTRL_PIN(PA_BASE + 29, "PA29")
+#define SUNXI_PINCTRL_PIN_PA30 PINCTRL_PIN(PA_BASE + 30, "PA30")
+#define SUNXI_PINCTRL_PIN_PA31 PINCTRL_PIN(PA_BASE + 31, "PA31")
+
+#define SUNXI_PINCTRL_PIN_PB0 PINCTRL_PIN(PB_BASE + 0, "PB0")
+#define SUNXI_PINCTRL_PIN_PB1 PINCTRL_PIN(PB_BASE + 1, "PB1")
+#define SUNXI_PINCTRL_PIN_PB2 PINCTRL_PIN(PB_BASE + 2, "PB2")
+#define SUNXI_PINCTRL_PIN_PB3 PINCTRL_PIN(PB_BASE + 3, "PB3")
+#define SUNXI_PINCTRL_PIN_PB4 PINCTRL_PIN(PB_BASE + 4, "PB4")
+#define SUNXI_PINCTRL_PIN_PB5 PINCTRL_PIN(PB_BASE + 5, "PB5")
+#define SUNXI_PINCTRL_PIN_PB6 PINCTRL_PIN(PB_BASE + 6, "PB6")
+#define SUNXI_PINCTRL_PIN_PB7 PINCTRL_PIN(PB_BASE + 7, "PB7")
+#define SUNXI_PINCTRL_PIN_PB8 PINCTRL_PIN(PB_BASE + 8, "PB8")
+#define SUNXI_PINCTRL_PIN_PB9 PINCTRL_PIN(PB_BASE + 9, "PB9")
+#define SUNXI_PINCTRL_PIN_PB10 PINCTRL_PIN(PB_BASE + 10, "PB10")
+#define SUNXI_PINCTRL_PIN_PB11 PINCTRL_PIN(PB_BASE + 11, "PB11")
+#define SUNXI_PINCTRL_PIN_PB12 PINCTRL_PIN(PB_BASE + 12, "PB12")
+#define SUNXI_PINCTRL_PIN_PB13 PINCTRL_PIN(PB_BASE + 13, "PB13")
+#define SUNXI_PINCTRL_PIN_PB14 PINCTRL_PIN(PB_BASE + 14, "PB14")
+#define SUNXI_PINCTRL_PIN_PB15 PINCTRL_PIN(PB_BASE + 15, "PB15")
+#define SUNXI_PINCTRL_PIN_PB16 PINCTRL_PIN(PB_BASE + 16, "PB16")
+#define SUNXI_PINCTRL_PIN_PB17 PINCTRL_PIN(PB_BASE + 17, "PB17")
+#define SUNXI_PINCTRL_PIN_PB18 PINCTRL_PIN(PB_BASE + 18, "PB18")
+#define SUNXI_PINCTRL_PIN_PB19 PINCTRL_PIN(PB_BASE + 19, "PB19")
+#define SUNXI_PINCTRL_PIN_PB20 PINCTRL_PIN(PB_BASE + 20, "PB20")
+#define SUNXI_PINCTRL_PIN_PB21 PINCTRL_PIN(PB_BASE + 21, "PB21")
+#define SUNXI_PINCTRL_PIN_PB22 PINCTRL_PIN(PB_BASE + 22, "PB22")
+#define SUNXI_PINCTRL_PIN_PB23 PINCTRL_PIN(PB_BASE + 23, "PB23")
+#define SUNXI_PINCTRL_PIN_PB24 PINCTRL_PIN(PB_BASE + 24, "PB24")
+#define SUNXI_PINCTRL_PIN_PB25 PINCTRL_PIN(PB_BASE + 25, "PB25")
+#define SUNXI_PINCTRL_PIN_PB26 PINCTRL_PIN(PB_BASE + 26, "PB26")
+#define SUNXI_PINCTRL_PIN_PB27 PINCTRL_PIN(PB_BASE + 27, "PB27")
+#define SUNXI_PINCTRL_PIN_PB28 PINCTRL_PIN(PB_BASE + 28, "PB28")
+#define SUNXI_PINCTRL_PIN_PB29 PINCTRL_PIN(PB_BASE + 29, "PB29")
+#define SUNXI_PINCTRL_PIN_PB30 PINCTRL_PIN(PB_BASE + 30, "PB30")
+#define SUNXI_PINCTRL_PIN_PB31 PINCTRL_PIN(PB_BASE + 31, "PB31")
+
+#define SUNXI_PINCTRL_PIN_PC0 PINCTRL_PIN(PC_BASE + 0, "PC0")
+#define SUNXI_PINCTRL_PIN_PC1 PINCTRL_PIN(PC_BASE + 1, "PC1")
+#define SUNXI_PINCTRL_PIN_PC2 PINCTRL_PIN(PC_BASE + 2, "PC2")
+#define SUNXI_PINCTRL_PIN_PC3 PINCTRL_PIN(PC_BASE + 3, "PC3")
+#define SUNXI_PINCTRL_PIN_PC4 PINCTRL_PIN(PC_BASE + 4, "PC4")
+#define SUNXI_PINCTRL_PIN_PC5 PINCTRL_PIN(PC_BASE + 5, "PC5")
+#define SUNXI_PINCTRL_PIN_PC6 PINCTRL_PIN(PC_BASE + 6, "PC6")
+#define SUNXI_PINCTRL_PIN_PC7 PINCTRL_PIN(PC_BASE + 7, "PC7")
+#define SUNXI_PINCTRL_PIN_PC8 PINCTRL_PIN(PC_BASE + 8, "PC8")
+#define SUNXI_PINCTRL_PIN_PC9 PINCTRL_PIN(PC_BASE + 9, "PC9")
+#define SUNXI_PINCTRL_PIN_PC10 PINCTRL_PIN(PC_BASE + 10, "PC10")
+#define SUNXI_PINCTRL_PIN_PC11 PINCTRL_PIN(PC_BASE + 11, "PC11")
+#define SUNXI_PINCTRL_PIN_PC12 PINCTRL_PIN(PC_BASE + 12, "PC12")
+#define SUNXI_PINCTRL_PIN_PC13 PINCTRL_PIN(PC_BASE + 13, "PC13")
+#define SUNXI_PINCTRL_PIN_PC14 PINCTRL_PIN(PC_BASE + 14, "PC14")
+#define SUNXI_PINCTRL_PIN_PC15 PINCTRL_PIN(PC_BASE + 15, "PC15")
+#define SUNXI_PINCTRL_PIN_PC16 PINCTRL_PIN(PC_BASE + 16, "PC16")
+#define SUNXI_PINCTRL_PIN_PC17 PINCTRL_PIN(PC_BASE + 17, "PC17")
+#define SUNXI_PINCTRL_PIN_PC18 PINCTRL_PIN(PC_BASE + 18, "PC18")
+#define SUNXI_PINCTRL_PIN_PC19 PINCTRL_PIN(PC_BASE + 19, "PC19")
+#define SUNXI_PINCTRL_PIN_PC20 PINCTRL_PIN(PC_BASE + 20, "PC20")
+#define SUNXI_PINCTRL_PIN_PC21 PINCTRL_PIN(PC_BASE + 21, "PC21")
+#define SUNXI_PINCTRL_PIN_PC22 PINCTRL_PIN(PC_BASE + 22, "PC22")
+#define SUNXI_PINCTRL_PIN_PC23 PINCTRL_PIN(PC_BASE + 23, "PC23")
+#define SUNXI_PINCTRL_PIN_PC24 PINCTRL_PIN(PC_BASE + 24, "PC24")
+#define SUNXI_PINCTRL_PIN_PC25 PINCTRL_PIN(PC_BASE + 25, "PC25")
+#define SUNXI_PINCTRL_PIN_PC26 PINCTRL_PIN(PC_BASE + 26, "PC26")
+#define SUNXI_PINCTRL_PIN_PC27 PINCTRL_PIN(PC_BASE + 27, "PC27")
+#define SUNXI_PINCTRL_PIN_PC28 PINCTRL_PIN(PC_BASE + 28, "PC28")
+#define SUNXI_PINCTRL_PIN_PC29 PINCTRL_PIN(PC_BASE + 29, "PC29")
+#define SUNXI_PINCTRL_PIN_PC30 PINCTRL_PIN(PC_BASE + 30, "PC30")
+#define SUNXI_PINCTRL_PIN_PC31 PINCTRL_PIN(PC_BASE + 31, "PC31")
+
+#define SUNXI_PINCTRL_PIN_PD0 PINCTRL_PIN(PD_BASE + 0, "PD0")
+#define SUNXI_PINCTRL_PIN_PD1 PINCTRL_PIN(PD_BASE + 1, "PD1")
+#define SUNXI_PINCTRL_PIN_PD2 PINCTRL_PIN(PD_BASE + 2, "PD2")
+#define SUNXI_PINCTRL_PIN_PD3 PINCTRL_PIN(PD_BASE + 3, "PD3")
+#define SUNXI_PINCTRL_PIN_PD4 PINCTRL_PIN(PD_BASE + 4, "PD4")
+#define SUNXI_PINCTRL_PIN_PD5 PINCTRL_PIN(PD_BASE + 5, "PD5")
+#define SUNXI_PINCTRL_PIN_PD6 PINCTRL_PIN(PD_BASE + 6, "PD6")
+#define SUNXI_PINCTRL_PIN_PD7 PINCTRL_PIN(PD_BASE + 7, "PD7")
+#define SUNXI_PINCTRL_PIN_PD8 PINCTRL_PIN(PD_BASE + 8, "PD8")
+#define SUNXI_PINCTRL_PIN_PD9 PINCTRL_PIN(PD_BASE + 9, "PD9")
+#define SUNXI_PINCTRL_PIN_PD10 PINCTRL_PIN(PD_BASE + 10, "PD10")
+#define SUNXI_PINCTRL_PIN_PD11 PINCTRL_PIN(PD_BASE + 11, "PD11")
+#define SUNXI_PINCTRL_PIN_PD12 PINCTRL_PIN(PD_BASE + 12, "PD12")
+#define SUNXI_PINCTRL_PIN_PD13 PINCTRL_PIN(PD_BASE + 13, "PD13")
+#define SUNXI_PINCTRL_PIN_PD14 PINCTRL_PIN(PD_BASE + 14, "PD14")
+#define SUNXI_PINCTRL_PIN_PD15 PINCTRL_PIN(PD_BASE + 15, "PD15")
+#define SUNXI_PINCTRL_PIN_PD16 PINCTRL_PIN(PD_BASE + 16, "PD16")
+#define SUNXI_PINCTRL_PIN_PD17 PINCTRL_PIN(PD_BASE + 17, "PD17")
+#define SUNXI_PINCTRL_PIN_PD18 PINCTRL_PIN(PD_BASE + 18, "PD18")
+#define SUNXI_PINCTRL_PIN_PD19 PINCTRL_PIN(PD_BASE + 19, "PD19")
+#define SUNXI_PINCTRL_PIN_PD20 PINCTRL_PIN(PD_BASE + 20, "PD20")
+#define SUNXI_PINCTRL_PIN_PD21 PINCTRL_PIN(PD_BASE + 21, "PD21")
+#define SUNXI_PINCTRL_PIN_PD22 PINCTRL_PIN(PD_BASE + 22, "PD22")
+#define SUNXI_PINCTRL_PIN_PD23 PINCTRL_PIN(PD_BASE + 23, "PD23")
+#define SUNXI_PINCTRL_PIN_PD24 PINCTRL_PIN(PD_BASE + 24, "PD24")
+#define SUNXI_PINCTRL_PIN_PD25 PINCTRL_PIN(PD_BASE + 25, "PD25")
+#define SUNXI_PINCTRL_PIN_PD26 PINCTRL_PIN(PD_BASE + 26, "PD26")
+#define SUNXI_PINCTRL_PIN_PD27 PINCTRL_PIN(PD_BASE + 27, "PD27")
+#define SUNXI_PINCTRL_PIN_PD28 PINCTRL_PIN(PD_BASE + 28, "PD28")
+#define SUNXI_PINCTRL_PIN_PD29 PINCTRL_PIN(PD_BASE + 29, "PD29")
+#define SUNXI_PINCTRL_PIN_PD30 PINCTRL_PIN(PD_BASE + 30, "PD30")
+#define SUNXI_PINCTRL_PIN_PD31 PINCTRL_PIN(PD_BASE + 31, "PD31")
+
+#define SUNXI_PINCTRL_PIN_PE0 PINCTRL_PIN(PE_BASE + 0, "PE0")
+#define SUNXI_PINCTRL_PIN_PE1 PINCTRL_PIN(PE_BASE + 1, "PE1")
+#define SUNXI_PINCTRL_PIN_PE2 PINCTRL_PIN(PE_BASE + 2, "PE2")
+#define SUNXI_PINCTRL_PIN_PE3 PINCTRL_PIN(PE_BASE + 3, "PE3")
+#define SUNXI_PINCTRL_PIN_PE4 PINCTRL_PIN(PE_BASE + 4, "PE4")
+#define SUNXI_PINCTRL_PIN_PE5 PINCTRL_PIN(PE_BASE + 5, "PE5")
+#define SUNXI_PINCTRL_PIN_PE6 PINCTRL_PIN(PE_BASE + 6, "PE6")
+#define SUNXI_PINCTRL_PIN_PE7 PINCTRL_PIN(PE_BASE + 7, "PE7")
+#define SUNXI_PINCTRL_PIN_PE8 PINCTRL_PIN(PE_BASE + 8, "PE8")
+#define SUNXI_PINCTRL_PIN_PE9 PINCTRL_PIN(PE_BASE + 9, "PE9")
+#define SUNXI_PINCTRL_PIN_PE10 PINCTRL_PIN(PE_BASE + 10, "PE10")
+#define SUNXI_PINCTRL_PIN_PE11 PINCTRL_PIN(PE_BASE + 11, "PE11")
+#define SUNXI_PINCTRL_PIN_PE12 PINCTRL_PIN(PE_BASE + 12, "PE12")
+#define SUNXI_PINCTRL_PIN_PE13 PINCTRL_PIN(PE_BASE + 13, "PE13")
+#define SUNXI_PINCTRL_PIN_PE14 PINCTRL_PIN(PE_BASE + 14, "PE14")
+#define SUNXI_PINCTRL_PIN_PE15 PINCTRL_PIN(PE_BASE + 15, "PE15")
+#define SUNXI_PINCTRL_PIN_PE16 PINCTRL_PIN(PE_BASE + 16, "PE16")
+#define SUNXI_PINCTRL_PIN_PE17 PINCTRL_PIN(PE_BASE + 17, "PE17")
+#define SUNXI_PINCTRL_PIN_PE18 PINCTRL_PIN(PE_BASE + 18, "PE18")
+#define SUNXI_PINCTRL_PIN_PE19 PINCTRL_PIN(PE_BASE + 19, "PE19")
+#define SUNXI_PINCTRL_PIN_PE20 PINCTRL_PIN(PE_BASE + 20, "PE20")
+#define SUNXI_PINCTRL_PIN_PE21 PINCTRL_PIN(PE_BASE + 21, "PE21")
+#define SUNXI_PINCTRL_PIN_PE22 PINCTRL_PIN(PE_BASE + 22, "PE22")
+#define SUNXI_PINCTRL_PIN_PE23 PINCTRL_PIN(PE_BASE + 23, "PE23")
+#define SUNXI_PINCTRL_PIN_PE24 PINCTRL_PIN(PE_BASE + 24, "PE24")
+#define SUNXI_PINCTRL_PIN_PE25 PINCTRL_PIN(PE_BASE + 25, "PE25")
+#define SUNXI_PINCTRL_PIN_PE26 PINCTRL_PIN(PE_BASE + 26, "PE26")
+#define SUNXI_PINCTRL_PIN_PE27 PINCTRL_PIN(PE_BASE + 27, "PE27")
+#define SUNXI_PINCTRL_PIN_PE28 PINCTRL_PIN(PE_BASE + 28, "PE28")
+#define SUNXI_PINCTRL_PIN_PE29 PINCTRL_PIN(PE_BASE + 29, "PE29")
+#define SUNXI_PINCTRL_PIN_PE30 PINCTRL_PIN(PE_BASE + 30, "PE30")
+#define SUNXI_PINCTRL_PIN_PE31 PINCTRL_PIN(PE_BASE + 31, "PE31")
+
+#define SUNXI_PINCTRL_PIN_PF0 PINCTRL_PIN(PF_BASE + 0, "PF0")
+#define SUNXI_PINCTRL_PIN_PF1 PINCTRL_PIN(PF_BASE + 1, "PF1")
+#define SUNXI_PINCTRL_PIN_PF2 PINCTRL_PIN(PF_BASE + 2, "PF2")
+#define SUNXI_PINCTRL_PIN_PF3 PINCTRL_PIN(PF_BASE + 3, "PF3")
+#define SUNXI_PINCTRL_PIN_PF4 PINCTRL_PIN(PF_BASE + 4, "PF4")
+#define SUNXI_PINCTRL_PIN_PF5 PINCTRL_PIN(PF_BASE + 5, "PF5")
+#define SUNXI_PINCTRL_PIN_PF6 PINCTRL_PIN(PF_BASE + 6, "PF6")
+#define SUNXI_PINCTRL_PIN_PF7 PINCTRL_PIN(PF_BASE + 7, "PF7")
+#define SUNXI_PINCTRL_PIN_PF8 PINCTRL_PIN(PF_BASE + 8, "PF8")
+#define SUNXI_PINCTRL_PIN_PF9 PINCTRL_PIN(PF_BASE + 9, "PF9")
+#define SUNXI_PINCTRL_PIN_PF10 PINCTRL_PIN(PF_BASE + 10, "PF10")
+#define SUNXI_PINCTRL_PIN_PF11 PINCTRL_PIN(PF_BASE + 11, "PF11")
+#define SUNXI_PINCTRL_PIN_PF12 PINCTRL_PIN(PF_BASE + 12, "PF12")
+#define SUNXI_PINCTRL_PIN_PF13 PINCTRL_PIN(PF_BASE + 13, "PF13")
+#define SUNXI_PINCTRL_PIN_PF14 PINCTRL_PIN(PF_BASE + 14, "PF14")
+#define SUNXI_PINCTRL_PIN_PF15 PINCTRL_PIN(PF_BASE + 15, "PF15")
+#define SUNXI_PINCTRL_PIN_PF16 PINCTRL_PIN(PF_BASE + 16, "PF16")
+#define SUNXI_PINCTRL_PIN_PF17 PINCTRL_PIN(PF_BASE + 17, "PF17")
+#define SUNXI_PINCTRL_PIN_PF18 PINCTRL_PIN(PF_BASE + 18, "PF18")
+#define SUNXI_PINCTRL_PIN_PF19 PINCTRL_PIN(PF_BASE + 19, "PF19")
+#define SUNXI_PINCTRL_PIN_PF20 PINCTRL_PIN(PF_BASE + 20, "PF20")
+#define SUNXI_PINCTRL_PIN_PF21 PINCTRL_PIN(PF_BASE + 21, "PF21")
+#define SUNXI_PINCTRL_PIN_PF22 PINCTRL_PIN(PF_BASE + 22, "PF22")
+#define SUNXI_PINCTRL_PIN_PF23 PINCTRL_PIN(PF_BASE + 23, "PF23")
+#define SUNXI_PINCTRL_PIN_PF24 PINCTRL_PIN(PF_BASE + 24, "PF24")
+#define SUNXI_PINCTRL_PIN_PF25 PINCTRL_PIN(PF_BASE + 25, "PF25")
+#define SUNXI_PINCTRL_PIN_PF26 PINCTRL_PIN(PF_BASE + 26, "PF26")
+#define SUNXI_PINCTRL_PIN_PF27 PINCTRL_PIN(PF_BASE + 27, "PF27")
+#define SUNXI_PINCTRL_PIN_PF28 PINCTRL_PIN(PF_BASE + 28, "PF28")
+#define SUNXI_PINCTRL_PIN_PF29 PINCTRL_PIN(PF_BASE + 29, "PF29")
+#define SUNXI_PINCTRL_PIN_PF30 PINCTRL_PIN(PF_BASE + 30, "PF30")
+#define SUNXI_PINCTRL_PIN_PF31 PINCTRL_PIN(PF_BASE + 31, "PF31")
+
+#define SUNXI_PINCTRL_PIN_PG0 PINCTRL_PIN(PG_BASE + 0, "PG0")
+#define SUNXI_PINCTRL_PIN_PG1 PINCTRL_PIN(PG_BASE + 1, "PG1")
+#define SUNXI_PINCTRL_PIN_PG2 PINCTRL_PIN(PG_BASE + 2, "PG2")
+#define SUNXI_PINCTRL_PIN_PG3 PINCTRL_PIN(PG_BASE + 3, "PG3")
+#define SUNXI_PINCTRL_PIN_PG4 PINCTRL_PIN(PG_BASE + 4, "PG4")
+#define SUNXI_PINCTRL_PIN_PG5 PINCTRL_PIN(PG_BASE + 5, "PG5")
+#define SUNXI_PINCTRL_PIN_PG6 PINCTRL_PIN(PG_BASE + 6, "PG6")
+#define SUNXI_PINCTRL_PIN_PG7 PINCTRL_PIN(PG_BASE + 7, "PG7")
+#define SUNXI_PINCTRL_PIN_PG8 PINCTRL_PIN(PG_BASE + 8, "PG8")
+#define SUNXI_PINCTRL_PIN_PG9 PINCTRL_PIN(PG_BASE + 9, "PG9")
+#define SUNXI_PINCTRL_PIN_PG10 PINCTRL_PIN(PG_BASE + 10, "PG10")
+#define SUNXI_PINCTRL_PIN_PG11 PINCTRL_PIN(PG_BASE + 11, "PG11")
+#define SUNXI_PINCTRL_PIN_PG12 PINCTRL_PIN(PG_BASE + 12, "PG12")
+#define SUNXI_PINCTRL_PIN_PG13 PINCTRL_PIN(PG_BASE + 13, "PG13")
+#define SUNXI_PINCTRL_PIN_PG14 PINCTRL_PIN(PG_BASE + 14, "PG14")
+#define SUNXI_PINCTRL_PIN_PG15 PINCTRL_PIN(PG_BASE + 15, "PG15")
+#define SUNXI_PINCTRL_PIN_PG16 PINCTRL_PIN(PG_BASE + 16, "PG16")
+#define SUNXI_PINCTRL_PIN_PG17 PINCTRL_PIN(PG_BASE + 17, "PG17")
+#define SUNXI_PINCTRL_PIN_PG18 PINCTRL_PIN(PG_BASE + 18, "PG18")
+#define SUNXI_PINCTRL_PIN_PG19 PINCTRL_PIN(PG_BASE + 19, "PG19")
+#define SUNXI_PINCTRL_PIN_PG20 PINCTRL_PIN(PG_BASE + 20, "PG20")
+#define SUNXI_PINCTRL_PIN_PG21 PINCTRL_PIN(PG_BASE + 21, "PG21")
+#define SUNXI_PINCTRL_PIN_PG22 PINCTRL_PIN(PG_BASE + 22, "PG22")
+#define SUNXI_PINCTRL_PIN_PG23 PINCTRL_PIN(PG_BASE + 23, "PG23")
+#define SUNXI_PINCTRL_PIN_PG24 PINCTRL_PIN(PG_BASE + 24, "PG24")
+#define SUNXI_PINCTRL_PIN_PG25 PINCTRL_PIN(PG_BASE + 25, "PG25")
+#define SUNXI_PINCTRL_PIN_PG26 PINCTRL_PIN(PG_BASE + 26, "PG26")
+#define SUNXI_PINCTRL_PIN_PG27 PINCTRL_PIN(PG_BASE + 27, "PG27")
+#define SUNXI_PINCTRL_PIN_PG28 PINCTRL_PIN(PG_BASE + 28, "PG28")
+#define SUNXI_PINCTRL_PIN_PG29 PINCTRL_PIN(PG_BASE + 29, "PG29")
+#define SUNXI_PINCTRL_PIN_PG30 PINCTRL_PIN(PG_BASE + 30, "PG30")
+#define SUNXI_PINCTRL_PIN_PG31 PINCTRL_PIN(PG_BASE + 31, "PG31")
+
+#define SUNXI_PINCTRL_PIN_PH0 PINCTRL_PIN(PH_BASE + 0, "PH0")
+#define SUNXI_PINCTRL_PIN_PH1 PINCTRL_PIN(PH_BASE + 1, "PH1")
+#define SUNXI_PINCTRL_PIN_PH2 PINCTRL_PIN(PH_BASE + 2, "PH2")
+#define SUNXI_PINCTRL_PIN_PH3 PINCTRL_PIN(PH_BASE + 3, "PH3")
+#define SUNXI_PINCTRL_PIN_PH4 PINCTRL_PIN(PH_BASE + 4, "PH4")
+#define SUNXI_PINCTRL_PIN_PH5 PINCTRL_PIN(PH_BASE + 5, "PH5")
+#define SUNXI_PINCTRL_PIN_PH6 PINCTRL_PIN(PH_BASE + 6, "PH6")
+#define SUNXI_PINCTRL_PIN_PH7 PINCTRL_PIN(PH_BASE + 7, "PH7")
+#define SUNXI_PINCTRL_PIN_PH8 PINCTRL_PIN(PH_BASE + 8, "PH8")
+#define SUNXI_PINCTRL_PIN_PH9 PINCTRL_PIN(PH_BASE + 9, "PH9")
+#define SUNXI_PINCTRL_PIN_PH10 PINCTRL_PIN(PH_BASE + 10, "PH10")
+#define SUNXI_PINCTRL_PIN_PH11 PINCTRL_PIN(PH_BASE + 11, "PH11")
+#define SUNXI_PINCTRL_PIN_PH12 PINCTRL_PIN(PH_BASE + 12, "PH12")
+#define SUNXI_PINCTRL_PIN_PH13 PINCTRL_PIN(PH_BASE + 13, "PH13")
+#define SUNXI_PINCTRL_PIN_PH14 PINCTRL_PIN(PH_BASE + 14, "PH14")
+#define SUNXI_PINCTRL_PIN_PH15 PINCTRL_PIN(PH_BASE + 15, "PH15")
+#define SUNXI_PINCTRL_PIN_PH16 PINCTRL_PIN(PH_BASE + 16, "PH16")
+#define SUNXI_PINCTRL_PIN_PH17 PINCTRL_PIN(PH_BASE + 17, "PH17")
+#define SUNXI_PINCTRL_PIN_PH18 PINCTRL_PIN(PH_BASE + 18, "PH18")
+#define SUNXI_PINCTRL_PIN_PH19 PINCTRL_PIN(PH_BASE + 19, "PH19")
+#define SUNXI_PINCTRL_PIN_PH20 PINCTRL_PIN(PH_BASE + 20, "PH20")
+#define SUNXI_PINCTRL_PIN_PH21 PINCTRL_PIN(PH_BASE + 21, "PH21")
+#define SUNXI_PINCTRL_PIN_PH22 PINCTRL_PIN(PH_BASE + 22, "PH22")
+#define SUNXI_PINCTRL_PIN_PH23 PINCTRL_PIN(PH_BASE + 23, "PH23")
+#define SUNXI_PINCTRL_PIN_PH24 PINCTRL_PIN(PH_BASE + 24, "PH24")
+#define SUNXI_PINCTRL_PIN_PH25 PINCTRL_PIN(PH_BASE + 25, "PH25")
+#define SUNXI_PINCTRL_PIN_PH26 PINCTRL_PIN(PH_BASE + 26, "PH26")
+#define SUNXI_PINCTRL_PIN_PH27 PINCTRL_PIN(PH_BASE + 27, "PH27")
+#define SUNXI_PINCTRL_PIN_PH28 PINCTRL_PIN(PH_BASE + 28, "PH28")
+#define SUNXI_PINCTRL_PIN_PH29 PINCTRL_PIN(PH_BASE + 29, "PH29")
+#define SUNXI_PINCTRL_PIN_PH30 PINCTRL_PIN(PH_BASE + 30, "PH30")
+#define SUNXI_PINCTRL_PIN_PH31 PINCTRL_PIN(PH_BASE + 31, "PH31")
+
+#define SUNXI_PINCTRL_PIN_PI0 PINCTRL_PIN(PI_BASE + 0, "PI0")
+#define SUNXI_PINCTRL_PIN_PI1 PINCTRL_PIN(PI_BASE + 1, "PI1")
+#define SUNXI_PINCTRL_PIN_PI2 PINCTRL_PIN(PI_BASE + 2, "PI2")
+#define SUNXI_PINCTRL_PIN_PI3 PINCTRL_PIN(PI_BASE + 3, "PI3")
+#define SUNXI_PINCTRL_PIN_PI4 PINCTRL_PIN(PI_BASE + 4, "PI4")
+#define SUNXI_PINCTRL_PIN_PI5 PINCTRL_PIN(PI_BASE + 5, "PI5")
+#define SUNXI_PINCTRL_PIN_PI6 PINCTRL_PIN(PI_BASE + 6, "PI6")
+#define SUNXI_PINCTRL_PIN_PI7 PINCTRL_PIN(PI_BASE + 7, "PI7")
+#define SUNXI_PINCTRL_PIN_PI8 PINCTRL_PIN(PI_BASE + 8, "PI8")
+#define SUNXI_PINCTRL_PIN_PI9 PINCTRL_PIN(PI_BASE + 9, "PI9")
+#define SUNXI_PINCTRL_PIN_PI10 PINCTRL_PIN(PI_BASE + 10, "PI10")
+#define SUNXI_PINCTRL_PIN_PI11 PINCTRL_PIN(PI_BASE + 11, "PI11")
+#define SUNXI_PINCTRL_PIN_PI12 PINCTRL_PIN(PI_BASE + 12, "PI12")
+#define SUNXI_PINCTRL_PIN_PI13 PINCTRL_PIN(PI_BASE + 13, "PI13")
+#define SUNXI_PINCTRL_PIN_PI14 PINCTRL_PIN(PI_BASE + 14, "PI14")
+#define SUNXI_PINCTRL_PIN_PI15 PINCTRL_PIN(PI_BASE + 15, "PI15")
+#define SUNXI_PINCTRL_PIN_PI16 PINCTRL_PIN(PI_BASE + 16, "PI16")
+#define SUNXI_PINCTRL_PIN_PI17 PINCTRL_PIN(PI_BASE + 17, "PI17")
+#define SUNXI_PINCTRL_PIN_PI18 PINCTRL_PIN(PI_BASE + 18, "PI18")
+#define SUNXI_PINCTRL_PIN_PI19 PINCTRL_PIN(PI_BASE + 19, "PI19")
+#define SUNXI_PINCTRL_PIN_PI20 PINCTRL_PIN(PI_BASE + 20, "PI20")
+#define SUNXI_PINCTRL_PIN_PI21 PINCTRL_PIN(PI_BASE + 21, "PI21")
+#define SUNXI_PINCTRL_PIN_PI22 PINCTRL_PIN(PI_BASE + 22, "PI22")
+#define SUNXI_PINCTRL_PIN_PI23 PINCTRL_PIN(PI_BASE + 23, "PI23")
+#define SUNXI_PINCTRL_PIN_PI24 PINCTRL_PIN(PI_BASE + 24, "PI24")
+#define SUNXI_PINCTRL_PIN_PI25 PINCTRL_PIN(PI_BASE + 25, "PI25")
+#define SUNXI_PINCTRL_PIN_PI26 PINCTRL_PIN(PI_BASE + 26, "PI26")
+#define SUNXI_PINCTRL_PIN_PI27 PINCTRL_PIN(PI_BASE + 27, "PI27")
+#define SUNXI_PINCTRL_PIN_PI28 PINCTRL_PIN(PI_BASE + 28, "PI28")
+#define SUNXI_PINCTRL_PIN_PI29 PINCTRL_PIN(PI_BASE + 29, "PI29")
+#define SUNXI_PINCTRL_PIN_PI30 PINCTRL_PIN(PI_BASE + 30, "PI30")
+#define SUNXI_PINCTRL_PIN_PI31 PINCTRL_PIN(PI_BASE + 31, "PI31")
+
+#define SUNXI_PIN_NAME_MAX_LEN 5
+
+#define BANK_MEM_SIZE 0x24
+#define MUX_REGS_OFFSET 0x0
+#define DATA_REGS_OFFSET 0x10
+#define DLEVEL_REGS_OFFSET 0x14
+#define PULL_REGS_OFFSET 0x1c
+
+#define PINS_PER_BANK 32
+#define MUX_PINS_PER_REG 8
+#define MUX_PINS_BITS 4
+#define MUX_PINS_MASK 0x0f
+#define DATA_PINS_PER_REG 32
+#define DATA_PINS_BITS 1
+#define DATA_PINS_MASK 0x01
+#define DLEVEL_PINS_PER_REG 16
+#define DLEVEL_PINS_BITS 2
+#define DLEVEL_PINS_MASK 0x03
+#define PULL_PINS_PER_REG 16
+#define PULL_PINS_BITS 2
+#define PULL_PINS_MASK 0x03
+
+struct sunxi_desc_function {
+ const char *name;
+ u8 muxval;
+};
+
+struct sunxi_desc_pin {
+ struct pinctrl_pin_desc pin;
+ struct sunxi_desc_function *functions;
+};
+
+struct sunxi_pinctrl_desc {
+ const struct sunxi_desc_pin *pins;
+ int npins;
+ struct pinctrl_gpio_range *ranges;
+ int nranges;
+};
+
+struct sunxi_pinctrl_function {
+ const char *name;
+ const char **groups;
+ unsigned ngroups;
+};
+
+struct sunxi_pinctrl_group {
+ const char *name;
+ unsigned long config;
+ unsigned pin;
+};
+
+struct sunxi_pinctrl {
+ void __iomem *membase;
+ struct gpio_chip *chip;
+ struct sunxi_pinctrl_desc *desc;
+ struct device *dev;
+ struct sunxi_pinctrl_function *functions;
+ unsigned nfunctions;
+ struct sunxi_pinctrl_group *groups;
+ unsigned ngroups;
+ struct pinctrl_dev *pctl_dev;
+};
+
+#define SUNXI_PIN(_pin, ...) \
+ { \
+ .pin = _pin, \
+ .functions = (struct sunxi_desc_function[]){ \
+ __VA_ARGS__, { } }, \
+ }
+
+#define SUNXI_FUNCTION(_val, _name) \
+ { \
+ .name = _name, \
+ .muxval = _val, \
+ }
+
+/*
+ * The sunXi PIO registers are organized as is:
+ * 0x00 - 0x0c Muxing values.
+ * 8 pins per register, each pin having a 4bits value
+ * 0x10 Pin values
+ * 32 bits per register, each pin corresponding to one bit
+ * 0x14 - 0x18 Drive level
+ * 16 pins per register, each pin having a 2bits value
+ * 0x1c - 0x20 Pull-Up values
+ * 16 pins per register, each pin having a 2bits value
+ *
+ * This is for the first bank. Each bank will have the same layout,
+ * with an offset being a multiple of 0x24.
+ *
+ * The following functions calculate from the pin number the register
+ * and the bit offset that we should access.
+ */
+static inline u32 sunxi_mux_reg(u16 pin)
+{
+ u8 bank = pin / PINS_PER_BANK;
+ u32 offset = bank * BANK_MEM_SIZE;
+ offset += MUX_REGS_OFFSET;
+ offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04;
+ return round_down(offset, 4);
+}
+
+static inline u32 sunxi_mux_offset(u16 pin)
+{
+ u32 pin_num = pin % MUX_PINS_PER_REG;
+ return pin_num * MUX_PINS_BITS;
+}
+
+static inline u32 sunxi_data_reg(u16 pin)
+{
+ u8 bank = pin / PINS_PER_BANK;
+ u32 offset = bank * BANK_MEM_SIZE;
+ offset += DATA_REGS_OFFSET;
+ offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04;
+ return round_down(offset, 4);
+}
+
+static inline u32 sunxi_data_offset(u16 pin)
+{
+ u32 pin_num = pin % DATA_PINS_PER_REG;
+ return pin_num * DATA_PINS_BITS;
+}
+
+static inline u32 sunxi_dlevel_reg(u16 pin)
+{
+ u8 bank = pin / PINS_PER_BANK;
+ u32 offset = bank * BANK_MEM_SIZE;
+ offset += DLEVEL_REGS_OFFSET;
+ offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04;
+ return round_down(offset, 4);
+}
+
+static inline u32 sunxi_dlevel_offset(u16 pin)
+{
+ u32 pin_num = pin % DLEVEL_PINS_PER_REG;
+ return pin_num * DLEVEL_PINS_BITS;
+}
+
+static inline u32 sunxi_pull_reg(u16 pin)
+{
+ u8 bank = pin / PINS_PER_BANK;
+ u32 offset = bank * BANK_MEM_SIZE;
+ offset += PULL_REGS_OFFSET;
+ offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04;
+ return round_down(offset, 4);
+}
+
+static inline u32 sunxi_pull_offset(u16 pin)
+{
+ u32 pin_num = pin % PULL_PINS_PER_REG;
+ return pin_num * PULL_PINS_BITS;
+}
+
+#endif /* __PINCTRL_SUNXI_H */
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index ae1e4bb..f195d77 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -201,6 +201,7 @@
{"nvidia,open-drain", TEGRA_PINCONF_PARAM_OPEN_DRAIN},
{"nvidia,lock", TEGRA_PINCONF_PARAM_LOCK},
{"nvidia,io-reset", TEGRA_PINCONF_PARAM_IORESET},
+ {"nvidia,rcv-sel", TEGRA_PINCONF_PARAM_RCV_SEL},
{"nvidia,high-speed-mode", TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE},
{"nvidia,schmitt", TEGRA_PINCONF_PARAM_SCHMITT},
{"nvidia,low-power-mode", TEGRA_PINCONF_PARAM_LOW_POWER_MODE},
@@ -208,6 +209,7 @@
{"nvidia,pull-up-strength", TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH},
{"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING},
{"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
+ {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE},
};
static int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
@@ -450,6 +452,12 @@
*bit = g->ioreset_bit;
*width = 1;
break;
+ case TEGRA_PINCONF_PARAM_RCV_SEL:
+ *bank = g->rcv_sel_bank;
+ *reg = g->rcv_sel_reg;
+ *bit = g->rcv_sel_bit;
+ *width = 1;
+ break;
case TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE:
*bank = g->drv_bank;
*reg = g->drv_reg;
@@ -492,6 +500,12 @@
*bit = g->slwr_bit;
*width = g->slwr_width;
break;
+ case TEGRA_PINCONF_PARAM_DRIVE_TYPE:
+ *bank = g->drvtype_bank;
+ *reg = g->drvtype_reg;
+ *bit = g->drvtype_bit;
+ *width = 2;
+ break;
default:
dev_err(pmx->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
diff --git a/drivers/pinctrl/pinctrl-tegra.h b/drivers/pinctrl/pinctrl-tegra.h
index 62e3809..817f706 100644
--- a/drivers/pinctrl/pinctrl-tegra.h
+++ b/drivers/pinctrl/pinctrl-tegra.h
@@ -30,6 +30,8 @@
/* argument: Boolean */
TEGRA_PINCONF_PARAM_IORESET,
/* argument: Boolean */
+ TEGRA_PINCONF_PARAM_RCV_SEL,
+ /* argument: Boolean */
TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
/* argument: Boolean */
TEGRA_PINCONF_PARAM_SCHMITT,
@@ -43,6 +45,8 @@
TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
/* argument: Integer, range is HW-dependant */
TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_DRIVE_TYPE,
};
enum tegra_pinconf_pull {
@@ -95,6 +99,9 @@
* @ioreset_reg: IO reset register offset. -1 if unsupported.
* @ioreset_bank: IO reset register bank. 0 if unsupported.
* @ioreset_bit: IO reset register bit. 0 if unsupported.
+ * @rcv_sel_reg: Receiver select offset. -1 if unsupported.
+ * @rcv_sel_bank: Receiver select bank. 0 if unsupported.
+ * @rcv_sel_bit: Receiver select bit. 0 if unsupported.
* @drv_reg: Drive fields register offset. -1 if unsupported.
* This register contains the hsm, schmitt, lpmd, drvdn,
* drvup, slwr, and slwf parameters.
@@ -110,6 +117,9 @@
* @slwr_width: Slew Rising field width. 0 if unsupported.
* @slwf_bit: Slew Falling register bit. 0 if unsupported.
* @slwf_width: Slew Falling field width. 0 if unsupported.
+ * @drvtype_reg: Drive type fields register offset. -1 if unsupported.
+ * @drvtype_bank: Drive type fields register bank. 0 if unsupported.
+ * @drvtype_bit: Drive type register bit. 0 if unsupported.
*
* A representation of a group of pins (possibly just one pin) in the Tegra
* pin controller. Each group allows some parameter or parameters to be
@@ -131,15 +141,19 @@
s16 odrain_reg;
s16 lock_reg;
s16 ioreset_reg;
+ s16 rcv_sel_reg;
s16 drv_reg;
+ s16 drvtype_reg;
u32 mux_bank:2;
u32 pupd_bank:2;
u32 tri_bank:2;
u32 einput_bank:2;
u32 odrain_bank:2;
u32 ioreset_bank:2;
+ u32 rcv_sel_bank:2;
u32 lock_bank:2;
u32 drv_bank:2;
+ u32 drvtype_bank:2;
u32 mux_bit:5;
u32 pupd_bit:5;
u32 tri_bit:5;
@@ -147,6 +161,7 @@
u32 odrain_bit:5;
u32 lock_bit:5;
u32 ioreset_bit:5;
+ u32 rcv_sel_bit:5;
u32 hsm_bit:5;
u32 schmitt_bit:5;
u32 lpmd_bit:5;
@@ -154,6 +169,7 @@
u32 drvup_bit:5;
u32 slwr_bit:5;
u32 slwf_bit:5;
+ u32 drvtype_bit:5;
u32 drvdn_width:6;
u32 drvup_width:6;
u32 slwr_width:6;
diff --git a/drivers/pinctrl/pinctrl-tegra114.c b/drivers/pinctrl/pinctrl-tegra114.c
new file mode 100644
index 0000000..622c485
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-tegra114.c
@@ -0,0 +1,2769 @@
+/*
+ * Pinctrl data and driver for the NVIDIA Tegra114 pinmux
+ *
+ * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Arthur: Pritesh Raithatha <praithatha@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "pinctrl-tegra.h"
+
+/*
+ * Most pins affected by the pinmux can also be GPIOs. Define these first.
+ * These must match how the GPIO driver names/numbers its pins.
+ */
+#define _GPIO(offset) (offset)
+
+#define TEGRA_PIN_CLK_32K_OUT_PA0 _GPIO(0)
+#define TEGRA_PIN_UART3_CTS_N_PA1 _GPIO(1)
+#define TEGRA_PIN_DAP2_FS_PA2 _GPIO(2)
+#define TEGRA_PIN_DAP2_SCLK_PA3 _GPIO(3)
+#define TEGRA_PIN_DAP2_DIN_PA4 _GPIO(4)
+#define TEGRA_PIN_DAP2_DOUT_PA5 _GPIO(5)
+#define TEGRA_PIN_SDMMC3_CLK_PA6 _GPIO(6)
+#define TEGRA_PIN_SDMMC3_CMD_PA7 _GPIO(7)
+#define TEGRA_PIN_GMI_A17_PB0 _GPIO(8)
+#define TEGRA_PIN_GMI_A18_PB1 _GPIO(9)
+#define TEGRA_PIN_SDMMC3_DAT3_PB4 _GPIO(12)
+#define TEGRA_PIN_SDMMC3_DAT2_PB5 _GPIO(13)
+#define TEGRA_PIN_SDMMC3_DAT1_PB6 _GPIO(14)
+#define TEGRA_PIN_SDMMC3_DAT0_PB7 _GPIO(15)
+#define TEGRA_PIN_UART3_RTS_N_PC0 _GPIO(16)
+#define TEGRA_PIN_UART2_TXD_PC2 _GPIO(18)
+#define TEGRA_PIN_UART2_RXD_PC3 _GPIO(19)
+#define TEGRA_PIN_GEN1_I2C_SCL_PC4 _GPIO(20)
+#define TEGRA_PIN_GEN1_I2C_SDA_PC5 _GPIO(21)
+#define TEGRA_PIN_GMI_WP_N_PC7 _GPIO(23)
+#define TEGRA_PIN_GMI_AD0_PG0 _GPIO(48)
+#define TEGRA_PIN_GMI_AD1_PG1 _GPIO(49)
+#define TEGRA_PIN_GMI_AD2_PG2 _GPIO(50)
+#define TEGRA_PIN_GMI_AD3_PG3 _GPIO(51)
+#define TEGRA_PIN_GMI_AD4_PG4 _GPIO(52)
+#define TEGRA_PIN_GMI_AD5_PG5 _GPIO(53)
+#define TEGRA_PIN_GMI_AD6_PG6 _GPIO(54)
+#define TEGRA_PIN_GMI_AD7_PG7 _GPIO(55)
+#define TEGRA_PIN_GMI_AD8_PH0 _GPIO(56)
+#define TEGRA_PIN_GMI_AD9_PH1 _GPIO(57)
+#define TEGRA_PIN_GMI_AD10_PH2 _GPIO(58)
+#define TEGRA_PIN_GMI_AD11_PH3 _GPIO(59)
+#define TEGRA_PIN_GMI_AD12_PH4 _GPIO(60)
+#define TEGRA_PIN_GMI_AD13_PH5 _GPIO(61)
+#define TEGRA_PIN_GMI_AD14_PH6 _GPIO(62)
+#define TEGRA_PIN_GMI_AD15_PH7 _GPIO(63)
+#define TEGRA_PIN_GMI_WR_N_PI0 _GPIO(64)
+#define TEGRA_PIN_GMI_OE_N_PI1 _GPIO(65)
+#define TEGRA_PIN_GMI_CS6_N_PI3 _GPIO(67)
+#define TEGRA_PIN_GMI_RST_N_PI4 _GPIO(68)
+#define TEGRA_PIN_GMI_IORDY_PI5 _GPIO(69)
+#define TEGRA_PIN_GMI_CS7_N_PI6 _GPIO(70)
+#define TEGRA_PIN_GMI_WAIT_PI7 _GPIO(71)
+#define TEGRA_PIN_GMI_CS0_N_PJ0 _GPIO(72)
+#define TEGRA_PIN_GMI_CS1_N_PJ2 _GPIO(74)
+#define TEGRA_PIN_GMI_DQS_P_PJ3 _GPIO(75)
+#define TEGRA_PIN_UART2_CTS_N_PJ5 _GPIO(77)
+#define TEGRA_PIN_UART2_RTS_N_PJ6 _GPIO(78)
+#define TEGRA_PIN_GMI_A16_PJ7 _GPIO(79)
+#define TEGRA_PIN_GMI_ADV_N_PK0 _GPIO(80)
+#define TEGRA_PIN_GMI_CLK_PK1 _GPIO(81)
+#define TEGRA_PIN_GMI_CS4_N_PK2 _GPIO(82)
+#define TEGRA_PIN_GMI_CS2_N_PK3 _GPIO(83)
+#define TEGRA_PIN_GMI_CS3_N_PK4 _GPIO(84)
+#define TEGRA_PIN_SPDIF_OUT_PK5 _GPIO(85)
+#define TEGRA_PIN_SPDIF_IN_PK6 _GPIO(86)
+#define TEGRA_PIN_GMI_A19_PK7 _GPIO(87)
+#define TEGRA_PIN_DAP1_FS_PN0 _GPIO(104)
+#define TEGRA_PIN_DAP1_DIN_PN1 _GPIO(105)
+#define TEGRA_PIN_DAP1_DOUT_PN2 _GPIO(106)
+#define TEGRA_PIN_DAP1_SCLK_PN3 _GPIO(107)
+#define TEGRA_PIN_USB_VBUS_EN0_PN4 _GPIO(108)
+#define TEGRA_PIN_USB_VBUS_EN1_PN5 _GPIO(109)
+#define TEGRA_PIN_HDMI_INT_PN7 _GPIO(111)
+#define TEGRA_PIN_ULPI_DATA7_PO0 _GPIO(112)
+#define TEGRA_PIN_ULPI_DATA0_PO1 _GPIO(113)
+#define TEGRA_PIN_ULPI_DATA1_PO2 _GPIO(114)
+#define TEGRA_PIN_ULPI_DATA2_PO3 _GPIO(115)
+#define TEGRA_PIN_ULPI_DATA3_PO4 _GPIO(116)
+#define TEGRA_PIN_ULPI_DATA4_PO5 _GPIO(117)
+#define TEGRA_PIN_ULPI_DATA5_PO6 _GPIO(118)
+#define TEGRA_PIN_ULPI_DATA6_PO7 _GPIO(119)
+#define TEGRA_PIN_DAP3_FS_PP0 _GPIO(120)
+#define TEGRA_PIN_DAP3_DIN_PP1 _GPIO(121)
+#define TEGRA_PIN_DAP3_DOUT_PP2 _GPIO(122)
+#define TEGRA_PIN_DAP3_SCLK_PP3 _GPIO(123)
+#define TEGRA_PIN_DAP4_FS_PP4 _GPIO(124)
+#define TEGRA_PIN_DAP4_DIN_PP5 _GPIO(125)
+#define TEGRA_PIN_DAP4_DOUT_PP6 _GPIO(126)
+#define TEGRA_PIN_DAP4_SCLK_PP7 _GPIO(127)
+#define TEGRA_PIN_KB_COL0_PQ0 _GPIO(128)
+#define TEGRA_PIN_KB_COL1_PQ1 _GPIO(129)
+#define TEGRA_PIN_KB_COL2_PQ2 _GPIO(130)
+#define TEGRA_PIN_KB_COL3_PQ3 _GPIO(131)
+#define TEGRA_PIN_KB_COL4_PQ4 _GPIO(132)
+#define TEGRA_PIN_KB_COL5_PQ5 _GPIO(133)
+#define TEGRA_PIN_KB_COL6_PQ6 _GPIO(134)
+#define TEGRA_PIN_KB_COL7_PQ7 _GPIO(135)
+#define TEGRA_PIN_KB_ROW0_PR0 _GPIO(136)
+#define TEGRA_PIN_KB_ROW1_PR1 _GPIO(137)
+#define TEGRA_PIN_KB_ROW2_PR2 _GPIO(138)
+#define TEGRA_PIN_KB_ROW3_PR3 _GPIO(139)
+#define TEGRA_PIN_KB_ROW4_PR4 _GPIO(140)
+#define TEGRA_PIN_KB_ROW5_PR5 _GPIO(141)
+#define TEGRA_PIN_KB_ROW6_PR6 _GPIO(142)
+#define TEGRA_PIN_KB_ROW7_PR7 _GPIO(143)
+#define TEGRA_PIN_KB_ROW8_PS0 _GPIO(144)
+#define TEGRA_PIN_KB_ROW9_PS1 _GPIO(145)
+#define TEGRA_PIN_KB_ROW10_PS2 _GPIO(146)
+#define TEGRA_PIN_GEN2_I2C_SCL_PT5 _GPIO(157)
+#define TEGRA_PIN_GEN2_I2C_SDA_PT6 _GPIO(158)
+#define TEGRA_PIN_SDMMC4_CMD_PT7 _GPIO(159)
+#define TEGRA_PIN_PU0 _GPIO(160)
+#define TEGRA_PIN_PU1 _GPIO(161)
+#define TEGRA_PIN_PU2 _GPIO(162)
+#define TEGRA_PIN_PU3 _GPIO(163)
+#define TEGRA_PIN_PU4 _GPIO(164)
+#define TEGRA_PIN_PU5 _GPIO(165)
+#define TEGRA_PIN_PU6 _GPIO(166)
+#define TEGRA_PIN_PV0 _GPIO(168)
+#define TEGRA_PIN_PV1 _GPIO(169)
+#define TEGRA_PIN_SDMMC3_CD_N_PV2 _GPIO(170)
+#define TEGRA_PIN_SDMMC1_WP_N_PV3 _GPIO(171)
+#define TEGRA_PIN_DDC_SCL_PV4 _GPIO(172)
+#define TEGRA_PIN_DDC_SDA_PV5 _GPIO(173)
+#define TEGRA_PIN_GPIO_W2_AUD_PW2 _GPIO(178)
+#define TEGRA_PIN_GPIO_W3_AUD_PW3 _GPIO(179)
+#define TEGRA_PIN_CLK1_OUT_PW4 _GPIO(180)
+#define TEGRA_PIN_CLK2_OUT_PW5 _GPIO(181)
+#define TEGRA_PIN_UART3_TXD_PW6 _GPIO(182)
+#define TEGRA_PIN_UART3_RXD_PW7 _GPIO(183)
+#define TEGRA_PIN_DVFS_PWM_PX0 _GPIO(184)
+#define TEGRA_PIN_GPIO_X1_AUD_PX1 _GPIO(185)
+#define TEGRA_PIN_DVFS_CLK_PX2 _GPIO(186)
+#define TEGRA_PIN_GPIO_X3_AUD_PX3 _GPIO(187)
+#define TEGRA_PIN_GPIO_X4_AUD_PX4 _GPIO(188)
+#define TEGRA_PIN_GPIO_X5_AUD_PX5 _GPIO(189)
+#define TEGRA_PIN_GPIO_X6_AUD_PX6 _GPIO(190)
+#define TEGRA_PIN_GPIO_X7_AUD_PX7 _GPIO(191)
+#define TEGRA_PIN_ULPI_CLK_PY0 _GPIO(192)
+#define TEGRA_PIN_ULPI_DIR_PY1 _GPIO(193)
+#define TEGRA_PIN_ULPI_NXT_PY2 _GPIO(194)
+#define TEGRA_PIN_ULPI_STP_PY3 _GPIO(195)
+#define TEGRA_PIN_SDMMC1_DAT3_PY4 _GPIO(196)
+#define TEGRA_PIN_SDMMC1_DAT2_PY5 _GPIO(197)
+#define TEGRA_PIN_SDMMC1_DAT1_PY6 _GPIO(198)
+#define TEGRA_PIN_SDMMC1_DAT0_PY7 _GPIO(199)
+#define TEGRA_PIN_SDMMC1_CLK_PZ0 _GPIO(200)
+#define TEGRA_PIN_SDMMC1_CMD_PZ1 _GPIO(201)
+#define TEGRA_PIN_SYS_CLK_REQ_PZ5 _GPIO(205)
+#define TEGRA_PIN_PWR_I2C_SCL_PZ6 _GPIO(206)
+#define TEGRA_PIN_PWR_I2C_SDA_PZ7 _GPIO(207)
+#define TEGRA_PIN_SDMMC4_DAT0_PAA0 _GPIO(208)
+#define TEGRA_PIN_SDMMC4_DAT1_PAA1 _GPIO(209)
+#define TEGRA_PIN_SDMMC4_DAT2_PAA2 _GPIO(210)
+#define TEGRA_PIN_SDMMC4_DAT3_PAA3 _GPIO(211)
+#define TEGRA_PIN_SDMMC4_DAT4_PAA4 _GPIO(212)
+#define TEGRA_PIN_SDMMC4_DAT5_PAA5 _GPIO(213)
+#define TEGRA_PIN_SDMMC4_DAT6_PAA6 _GPIO(214)
+#define TEGRA_PIN_SDMMC4_DAT7_PAA7 _GPIO(215)
+#define TEGRA_PIN_PBB0 _GPIO(216)
+#define TEGRA_PIN_CAM_I2C_SCL_PBB1 _GPIO(217)
+#define TEGRA_PIN_CAM_I2C_SDA_PBB2 _GPIO(218)
+#define TEGRA_PIN_PBB3 _GPIO(219)
+#define TEGRA_PIN_PBB4 _GPIO(220)
+#define TEGRA_PIN_PBB5 _GPIO(221)
+#define TEGRA_PIN_PBB6 _GPIO(222)
+#define TEGRA_PIN_PBB7 _GPIO(223)
+#define TEGRA_PIN_CAM_MCLK_PCC0 _GPIO(224)
+#define TEGRA_PIN_PCC1 _GPIO(225)
+#define TEGRA_PIN_PCC2 _GPIO(226)
+#define TEGRA_PIN_SDMMC4_CLK_PCC4 _GPIO(228)
+#define TEGRA_PIN_CLK2_REQ_PCC5 _GPIO(229)
+#define TEGRA_PIN_CLK3_OUT_PEE0 _GPIO(240)
+#define TEGRA_PIN_CLK3_REQ_PEE1 _GPIO(241)
+#define TEGRA_PIN_CLK1_REQ_PEE2 _GPIO(242)
+#define TEGRA_PIN_HDMI_CEC_PEE3 _GPIO(243)
+#define TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4 _GPIO(244)
+#define TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5 _GPIO(245)
+
+/* All non-GPIO pins follow */
+#define NUM_GPIOS (TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5 + 1)
+#define _PIN(offset) (NUM_GPIOS + (offset))
+
+/* Non-GPIO pins */
+#define TEGRA_PIN_CORE_PWR_REQ _PIN(0)
+#define TEGRA_PIN_CPU_PWR_REQ _PIN(1)
+#define TEGRA_PIN_PWR_INT_N _PIN(2)
+#define TEGRA_PIN_RESET_OUT_N _PIN(3)
+#define TEGRA_PIN_OWR _PIN(4)
+
+static const struct pinctrl_pin_desc tegra114_pins[] = {
+ PINCTRL_PIN(TEGRA_PIN_CLK_32K_OUT_PA0, "CLK_32K_OUT PA0"),
+ PINCTRL_PIN(TEGRA_PIN_UART3_CTS_N_PA1, "UART3_CTS_N PA1"),
+ PINCTRL_PIN(TEGRA_PIN_DAP2_FS_PA2, "DAP2_FS PA2"),
+ PINCTRL_PIN(TEGRA_PIN_DAP2_SCLK_PA3, "DAP2_SCLK PA3"),
+ PINCTRL_PIN(TEGRA_PIN_DAP2_DIN_PA4, "DAP2_DIN PA4"),
+ PINCTRL_PIN(TEGRA_PIN_DAP2_DOUT_PA5, "DAP2_DOUT PA5"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_PA6, "SDMMC3_CLK PA6"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_CMD_PA7, "SDMMC3_CMD PA7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_A17_PB0, "GMI_A17 PB0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_A18_PB1, "GMI_A18 PB1"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT3_PB4, "SDMMC3_DAT3 PB4"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT2_PB5, "SDMMC3_DAT2 PB5"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT1_PB6, "SDMMC3_DAT1 PB6"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT0_PB7, "SDMMC3_DAT0 PB7"),
+ PINCTRL_PIN(TEGRA_PIN_UART3_RTS_N_PC0, "UART3_RTS_N PC0"),
+ PINCTRL_PIN(TEGRA_PIN_UART2_TXD_PC2, "UART2_TXD PC2"),
+ PINCTRL_PIN(TEGRA_PIN_UART2_RXD_PC3, "UART2_RXD PC3"),
+ PINCTRL_PIN(TEGRA_PIN_GEN1_I2C_SCL_PC4, "GEN1_I2C_SCL PC4"),
+ PINCTRL_PIN(TEGRA_PIN_GEN1_I2C_SDA_PC5, "GEN1_I2C_SDA PC5"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_WP_N_PC7, "GMI_WP_N PC7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD0_PG0, "GMI_AD0 PG0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD1_PG1, "GMI_AD1 PG1"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD2_PG2, "GMI_AD2 PG2"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD3_PG3, "GMI_AD3 PG3"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD4_PG4, "GMI_AD4 PG4"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD5_PG5, "GMI_AD5 PG5"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD6_PG6, "GMI_AD6 PG6"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD7_PG7, "GMI_AD7 PG7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD8_PH0, "GMI_AD8 PH0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD9_PH1, "GMI_AD9 PH1"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD10_PH2, "GMI_AD10 PH2"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD11_PH3, "GMI_AD11 PH3"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD12_PH4, "GMI_AD12 PH4"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD13_PH5, "GMI_AD13 PH5"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD14_PH6, "GMI_AD14 PH6"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_AD15_PH7, "GMI_AD15 PH7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_WR_N_PI0, "GMI_WR_N PI0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_OE_N_PI1, "GMI_OE_N PI1"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS6_N_PI3, "GMI_CS6_N PI3"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_RST_N_PI4, "GMI_RST_N PI4"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_IORDY_PI5, "GMI_IORDY PI5"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS7_N_PI6, "GMI_CS7_N PI6"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_WAIT_PI7, "GMI_WAIT PI7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS0_N_PJ0, "GMI_CS0_N PJ0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS1_N_PJ2, "GMI_CS1_N PJ2"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_DQS_P_PJ3, "GMI_DQS_P PJ3"),
+ PINCTRL_PIN(TEGRA_PIN_UART2_CTS_N_PJ5, "UART2_CTS_N PJ5"),
+ PINCTRL_PIN(TEGRA_PIN_UART2_RTS_N_PJ6, "UART2_RTS_N PJ6"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_A16_PJ7, "GMI_A16 PJ7"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_ADV_N_PK0, "GMI_ADV_N PK0"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CLK_PK1, "GMI_CLK PK1"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS4_N_PK2, "GMI_CS4_N PK2"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS2_N_PK3, "GMI_CS2_N PK3"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_CS3_N_PK4, "GMI_CS3_N PK4"),
+ PINCTRL_PIN(TEGRA_PIN_SPDIF_OUT_PK5, "SPDIF_OUT PK5"),
+ PINCTRL_PIN(TEGRA_PIN_SPDIF_IN_PK6, "SPDIF_IN PK6"),
+ PINCTRL_PIN(TEGRA_PIN_GMI_A19_PK7, "GMI_A19 PK7"),
+ PINCTRL_PIN(TEGRA_PIN_DAP1_FS_PN0, "DAP1_FS PN0"),
+ PINCTRL_PIN(TEGRA_PIN_DAP1_DIN_PN1, "DAP1_DIN PN1"),
+ PINCTRL_PIN(TEGRA_PIN_DAP1_DOUT_PN2, "DAP1_DOUT PN2"),
+ PINCTRL_PIN(TEGRA_PIN_DAP1_SCLK_PN3, "DAP1_SCLK PN3"),
+ PINCTRL_PIN(TEGRA_PIN_USB_VBUS_EN0_PN4, "USB_VBUS_EN0 PN4"),
+ PINCTRL_PIN(TEGRA_PIN_USB_VBUS_EN1_PN5, "USB_VBUS_EN1 PN5"),
+ PINCTRL_PIN(TEGRA_PIN_HDMI_INT_PN7, "HDMI_INT PN7"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA7_PO0, "ULPI_DATA7 PO0"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA0_PO1, "ULPI_DATA0 PO1"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA1_PO2, "ULPI_DATA1 PO2"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA2_PO3, "ULPI_DATA2 PO3"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA3_PO4, "ULPI_DATA3 PO4"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA4_PO5, "ULPI_DATA4 PO5"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA5_PO6, "ULPI_DATA5 PO6"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DATA6_PO7, "ULPI_DATA6 PO7"),
+ PINCTRL_PIN(TEGRA_PIN_DAP3_FS_PP0, "DAP3_FS PP0"),
+ PINCTRL_PIN(TEGRA_PIN_DAP3_DIN_PP1, "DAP3_DIN PP1"),
+ PINCTRL_PIN(TEGRA_PIN_DAP3_DOUT_PP2, "DAP3_DOUT PP2"),
+ PINCTRL_PIN(TEGRA_PIN_DAP3_SCLK_PP3, "DAP3_SCLK PP3"),
+ PINCTRL_PIN(TEGRA_PIN_DAP4_FS_PP4, "DAP4_FS PP4"),
+ PINCTRL_PIN(TEGRA_PIN_DAP4_DIN_PP5, "DAP4_DIN PP5"),
+ PINCTRL_PIN(TEGRA_PIN_DAP4_DOUT_PP6, "DAP4_DOUT PP6"),
+ PINCTRL_PIN(TEGRA_PIN_DAP4_SCLK_PP7, "DAP4_SCLK PP7"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL0_PQ0, "KB_COL0 PQ0"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL1_PQ1, "KB_COL1 PQ1"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL2_PQ2, "KB_COL2 PQ2"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL3_PQ3, "KB_COL3 PQ3"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL4_PQ4, "KB_COL4 PQ4"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL5_PQ5, "KB_COL5 PQ5"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL6_PQ6, "KB_COL6 PQ6"),
+ PINCTRL_PIN(TEGRA_PIN_KB_COL7_PQ7, "KB_COL7 PQ7"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW0_PR0, "KB_ROW0 PR0"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW1_PR1, "KB_ROW1 PR1"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW2_PR2, "KB_ROW2 PR2"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW3_PR3, "KB_ROW3 PR3"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW4_PR4, "KB_ROW4 PR4"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW5_PR5, "KB_ROW5 PR5"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW6_PR6, "KB_ROW6 PR6"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW7_PR7, "KB_ROW7 PR7"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW8_PS0, "KB_ROW8 PS0"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW9_PS1, "KB_ROW9 PS1"),
+ PINCTRL_PIN(TEGRA_PIN_KB_ROW10_PS2, "KB_ROW10 PS2"),
+ PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SCL_PT5, "GEN2_I2C_SCL PT5"),
+ PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SDA_PT6, "GEN2_I2C_SDA PT6"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_CMD_PT7, "SDMMC4_CMD PT7"),
+ PINCTRL_PIN(TEGRA_PIN_PU0, "PU0"),
+ PINCTRL_PIN(TEGRA_PIN_PU1, "PU1"),
+ PINCTRL_PIN(TEGRA_PIN_PU2, "PU2"),
+ PINCTRL_PIN(TEGRA_PIN_PU3, "PU3"),
+ PINCTRL_PIN(TEGRA_PIN_PU4, "PU4"),
+ PINCTRL_PIN(TEGRA_PIN_PU5, "PU5"),
+ PINCTRL_PIN(TEGRA_PIN_PU6, "PU6"),
+ PINCTRL_PIN(TEGRA_PIN_PV0, "PV0"),
+ PINCTRL_PIN(TEGRA_PIN_PV1, "PV1"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_CD_N_PV2, "SDMMC3_CD_N PV2"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_WP_N_PV3, "SDMMC1_WP_N PV3"),
+ PINCTRL_PIN(TEGRA_PIN_DDC_SCL_PV4, "DDC_SCL PV4"),
+ PINCTRL_PIN(TEGRA_PIN_DDC_SDA_PV5, "DDC_SDA PV5"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_W2_AUD_PW2, "GPIO_W2_AUD PW2"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_W3_AUD_PW3, "GPIO_W3_AUD PW3"),
+ PINCTRL_PIN(TEGRA_PIN_CLK1_OUT_PW4, "CLK1_OUT PW4"),
+ PINCTRL_PIN(TEGRA_PIN_CLK2_OUT_PW5, "CLK2_OUT PW5"),
+ PINCTRL_PIN(TEGRA_PIN_UART3_TXD_PW6, "UART3_TXD PW6"),
+ PINCTRL_PIN(TEGRA_PIN_UART3_RXD_PW7, "UART3_RXD PW7"),
+ PINCTRL_PIN(TEGRA_PIN_DVFS_PWM_PX0, "DVFS_PWM PX0"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X1_AUD_PX1, "GPIO_X1_AUD PX1"),
+ PINCTRL_PIN(TEGRA_PIN_DVFS_CLK_PX2, "DVFS_CLK PX2"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X3_AUD_PX3, "GPIO_X3_AUD PX3"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X4_AUD_PX4, "GPIO_X4_AUD PX4"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X5_AUD_PX5, "GPIO_X5_AUD PX5"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X6_AUD_PX6, "GPIO_X6_AUD PX6"),
+ PINCTRL_PIN(TEGRA_PIN_GPIO_X7_AUD_PX7, "GPIO_X7_AUD PX7"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_CLK_PY0, "ULPI_CLK PY0"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_DIR_PY1, "ULPI_DIR PY1"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_NXT_PY2, "ULPI_NXT PY2"),
+ PINCTRL_PIN(TEGRA_PIN_ULPI_STP_PY3, "ULPI_STP PY3"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT3_PY4, "SDMMC1_DAT3 PY4"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT2_PY5, "SDMMC1_DAT2 PY5"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT1_PY6, "SDMMC1_DAT1 PY6"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT0_PY7, "SDMMC1_DAT0 PY7"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_CLK_PZ0, "SDMMC1_CLK PZ0"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC1_CMD_PZ1, "SDMMC1_CMD PZ1"),
+ PINCTRL_PIN(TEGRA_PIN_SYS_CLK_REQ_PZ5, "SYS_CLK_REQ PZ5"),
+ PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SCL_PZ6, "PWR_I2C_SCL PZ6"),
+ PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SDA_PZ7, "PWR_I2C_SDA PZ7"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT0_PAA0, "SDMMC4_DAT0 PAA0"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT1_PAA1, "SDMMC4_DAT1 PAA1"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT2_PAA2, "SDMMC4_DAT2 PAA2"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT3_PAA3, "SDMMC4_DAT3 PAA3"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT4_PAA4, "SDMMC4_DAT4 PAA4"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT5_PAA5, "SDMMC4_DAT5 PAA5"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT6_PAA6, "SDMMC4_DAT6 PAA6"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT7_PAA7, "SDMMC4_DAT7 PAA7"),
+ PINCTRL_PIN(TEGRA_PIN_PBB0, "PBB0"),
+ PINCTRL_PIN(TEGRA_PIN_CAM_I2C_SCL_PBB1, "CAM_I2C_SCL PBB1"),
+ PINCTRL_PIN(TEGRA_PIN_CAM_I2C_SDA_PBB2, "CAM_I2C_SDA PBB2"),
+ PINCTRL_PIN(TEGRA_PIN_PBB3, "PBB3"),
+ PINCTRL_PIN(TEGRA_PIN_PBB4, "PBB4"),
+ PINCTRL_PIN(TEGRA_PIN_PBB5, "PBB5"),
+ PINCTRL_PIN(TEGRA_PIN_PBB6, "PBB6"),
+ PINCTRL_PIN(TEGRA_PIN_PBB7, "PBB7"),
+ PINCTRL_PIN(TEGRA_PIN_CAM_MCLK_PCC0, "CAM_MCLK PCC0"),
+ PINCTRL_PIN(TEGRA_PIN_PCC1, "PCC1"),
+ PINCTRL_PIN(TEGRA_PIN_PCC2, "PCC2"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC4_CLK_PCC4, "SDMMC4_CLK PCC4"),
+ PINCTRL_PIN(TEGRA_PIN_CLK2_REQ_PCC5, "CLK2_REQ PCC5"),
+ PINCTRL_PIN(TEGRA_PIN_CLK3_OUT_PEE0, "CLK3_OUT PEE0"),
+ PINCTRL_PIN(TEGRA_PIN_CLK3_REQ_PEE1, "CLK3_REQ PEE1"),
+ PINCTRL_PIN(TEGRA_PIN_CLK1_REQ_PEE2, "CLK1_REQ PEE2"),
+ PINCTRL_PIN(TEGRA_PIN_HDMI_CEC_PEE3, "HDMI_CEC PEE3"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4, "SDMMC3_CLK_LB_OUT PEE4"),
+ PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5, "SDMMC3_CLK_LB_IN PEE5"),
+ PINCTRL_PIN(TEGRA_PIN_CORE_PWR_REQ, "CORE_PWR_REQ"),
+ PINCTRL_PIN(TEGRA_PIN_CPU_PWR_REQ, "CPU_PWR_REQ"),
+ PINCTRL_PIN(TEGRA_PIN_OWR, "OWR"),
+ PINCTRL_PIN(TEGRA_PIN_PWR_INT_N, "PWR_INT_N"),
+ PINCTRL_PIN(TEGRA_PIN_RESET_OUT_N, "RESET_OUT_N"),
+};
+
+static const unsigned clk_32k_out_pa0_pins[] = {
+ TEGRA_PIN_CLK_32K_OUT_PA0,
+};
+
+static const unsigned uart3_cts_n_pa1_pins[] = {
+ TEGRA_PIN_UART3_CTS_N_PA1,
+};
+
+static const unsigned dap2_fs_pa2_pins[] = {
+ TEGRA_PIN_DAP2_FS_PA2,
+};
+
+static const unsigned dap2_sclk_pa3_pins[] = {
+ TEGRA_PIN_DAP2_SCLK_PA3,
+};
+
+static const unsigned dap2_din_pa4_pins[] = {
+ TEGRA_PIN_DAP2_DIN_PA4,
+};
+
+static const unsigned dap2_dout_pa5_pins[] = {
+ TEGRA_PIN_DAP2_DOUT_PA5,
+};
+
+static const unsigned sdmmc3_clk_pa6_pins[] = {
+ TEGRA_PIN_SDMMC3_CLK_PA6,
+};
+
+static const unsigned sdmmc3_cmd_pa7_pins[] = {
+ TEGRA_PIN_SDMMC3_CMD_PA7,
+};
+
+static const unsigned gmi_a17_pb0_pins[] = {
+ TEGRA_PIN_GMI_A17_PB0,
+};
+
+static const unsigned gmi_a18_pb1_pins[] = {
+ TEGRA_PIN_GMI_A18_PB1,
+};
+
+static const unsigned sdmmc3_dat3_pb4_pins[] = {
+ TEGRA_PIN_SDMMC3_DAT3_PB4,
+};
+
+static const unsigned sdmmc3_dat2_pb5_pins[] = {
+ TEGRA_PIN_SDMMC3_DAT2_PB5,
+};
+
+static const unsigned sdmmc3_dat1_pb6_pins[] = {
+ TEGRA_PIN_SDMMC3_DAT1_PB6,
+};
+
+static const unsigned sdmmc3_dat0_pb7_pins[] = {
+ TEGRA_PIN_SDMMC3_DAT0_PB7,
+};
+
+static const unsigned uart3_rts_n_pc0_pins[] = {
+ TEGRA_PIN_UART3_RTS_N_PC0,
+};
+
+static const unsigned uart2_txd_pc2_pins[] = {
+ TEGRA_PIN_UART2_TXD_PC2,
+};
+
+static const unsigned uart2_rxd_pc3_pins[] = {
+ TEGRA_PIN_UART2_RXD_PC3,
+};
+
+static const unsigned gen1_i2c_scl_pc4_pins[] = {
+ TEGRA_PIN_GEN1_I2C_SCL_PC4,
+};
+
+static const unsigned gen1_i2c_sda_pc5_pins[] = {
+ TEGRA_PIN_GEN1_I2C_SDA_PC5,
+};
+
+static const unsigned gmi_wp_n_pc7_pins[] = {
+ TEGRA_PIN_GMI_WP_N_PC7,
+};
+
+static const unsigned gmi_ad0_pg0_pins[] = {
+ TEGRA_PIN_GMI_AD0_PG0,
+};
+
+static const unsigned gmi_ad1_pg1_pins[] = {
+ TEGRA_PIN_GMI_AD1_PG1,
+};
+
+static const unsigned gmi_ad2_pg2_pins[] = {
+ TEGRA_PIN_GMI_AD2_PG2,
+};
+
+static const unsigned gmi_ad3_pg3_pins[] = {
+ TEGRA_PIN_GMI_AD3_PG3,
+};
+
+static const unsigned gmi_ad4_pg4_pins[] = {
+ TEGRA_PIN_GMI_AD4_PG4,
+};
+
+static const unsigned gmi_ad5_pg5_pins[] = {
+ TEGRA_PIN_GMI_AD5_PG5,
+};
+
+static const unsigned gmi_ad6_pg6_pins[] = {
+ TEGRA_PIN_GMI_AD6_PG6,
+};
+
+static const unsigned gmi_ad7_pg7_pins[] = {
+ TEGRA_PIN_GMI_AD7_PG7,
+};
+
+static const unsigned gmi_ad8_ph0_pins[] = {
+ TEGRA_PIN_GMI_AD8_PH0,
+};
+
+static const unsigned gmi_ad9_ph1_pins[] = {
+ TEGRA_PIN_GMI_AD9_PH1,
+};
+
+static const unsigned gmi_ad10_ph2_pins[] = {
+ TEGRA_PIN_GMI_AD10_PH2,
+};
+
+static const unsigned gmi_ad11_ph3_pins[] = {
+ TEGRA_PIN_GMI_AD11_PH3,
+};
+
+static const unsigned gmi_ad12_ph4_pins[] = {
+ TEGRA_PIN_GMI_AD12_PH4,
+};
+
+static const unsigned gmi_ad13_ph5_pins[] = {
+ TEGRA_PIN_GMI_AD13_PH5,
+};
+
+static const unsigned gmi_ad14_ph6_pins[] = {
+ TEGRA_PIN_GMI_AD14_PH6,
+};
+
+static const unsigned gmi_ad15_ph7_pins[] = {
+ TEGRA_PIN_GMI_AD15_PH7,
+};
+
+static const unsigned gmi_wr_n_pi0_pins[] = {
+ TEGRA_PIN_GMI_WR_N_PI0,
+};
+
+static const unsigned gmi_oe_n_pi1_pins[] = {
+ TEGRA_PIN_GMI_OE_N_PI1,
+};
+
+static const unsigned gmi_cs6_n_pi3_pins[] = {
+ TEGRA_PIN_GMI_CS6_N_PI3,
+};
+
+static const unsigned gmi_rst_n_pi4_pins[] = {
+ TEGRA_PIN_GMI_RST_N_PI4,
+};
+
+static const unsigned gmi_iordy_pi5_pins[] = {
+ TEGRA_PIN_GMI_IORDY_PI5,
+};
+
+static const unsigned gmi_cs7_n_pi6_pins[] = {
+ TEGRA_PIN_GMI_CS7_N_PI6,
+};
+
+static const unsigned gmi_wait_pi7_pins[] = {
+ TEGRA_PIN_GMI_WAIT_PI7,
+};
+
+static const unsigned gmi_cs0_n_pj0_pins[] = {
+ TEGRA_PIN_GMI_CS0_N_PJ0,
+};
+
+static const unsigned gmi_cs1_n_pj2_pins[] = {
+ TEGRA_PIN_GMI_CS1_N_PJ2,
+};
+
+static const unsigned gmi_dqs_p_pj3_pins[] = {
+ TEGRA_PIN_GMI_DQS_P_PJ3,
+};
+
+static const unsigned uart2_cts_n_pj5_pins[] = {
+ TEGRA_PIN_UART2_CTS_N_PJ5,
+};
+
+static const unsigned uart2_rts_n_pj6_pins[] = {
+ TEGRA_PIN_UART2_RTS_N_PJ6,
+};
+
+static const unsigned gmi_a16_pj7_pins[] = {
+ TEGRA_PIN_GMI_A16_PJ7,
+};
+
+static const unsigned gmi_adv_n_pk0_pins[] = {
+ TEGRA_PIN_GMI_ADV_N_PK0,
+};
+
+static const unsigned gmi_clk_pk1_pins[] = {
+ TEGRA_PIN_GMI_CLK_PK1,
+};
+
+static const unsigned gmi_cs4_n_pk2_pins[] = {
+ TEGRA_PIN_GMI_CS4_N_PK2,
+};
+
+static const unsigned gmi_cs2_n_pk3_pins[] = {
+ TEGRA_PIN_GMI_CS2_N_PK3,
+};
+
+static const unsigned gmi_cs3_n_pk4_pins[] = {
+ TEGRA_PIN_GMI_CS3_N_PK4,
+};
+
+static const unsigned spdif_out_pk5_pins[] = {
+ TEGRA_PIN_SPDIF_OUT_PK5,
+};
+
+static const unsigned spdif_in_pk6_pins[] = {
+ TEGRA_PIN_SPDIF_IN_PK6,
+};
+
+static const unsigned gmi_a19_pk7_pins[] = {
+ TEGRA_PIN_GMI_A19_PK7,
+};
+
+static const unsigned dap1_fs_pn0_pins[] = {
+ TEGRA_PIN_DAP1_FS_PN0,
+};
+
+static const unsigned dap1_din_pn1_pins[] = {
+ TEGRA_PIN_DAP1_DIN_PN1,
+};
+
+static const unsigned dap1_dout_pn2_pins[] = {
+ TEGRA_PIN_DAP1_DOUT_PN2,
+};
+
+static const unsigned dap1_sclk_pn3_pins[] = {
+ TEGRA_PIN_DAP1_SCLK_PN3,
+};
+
+static const unsigned usb_vbus_en0_pn4_pins[] = {
+ TEGRA_PIN_USB_VBUS_EN0_PN4,
+};
+
+static const unsigned usb_vbus_en1_pn5_pins[] = {
+ TEGRA_PIN_USB_VBUS_EN1_PN5,
+};
+
+static const unsigned hdmi_int_pn7_pins[] = {
+ TEGRA_PIN_HDMI_INT_PN7,
+};
+
+static const unsigned ulpi_data7_po0_pins[] = {
+ TEGRA_PIN_ULPI_DATA7_PO0,
+};
+
+static const unsigned ulpi_data0_po1_pins[] = {
+ TEGRA_PIN_ULPI_DATA0_PO1,
+};
+
+static const unsigned ulpi_data1_po2_pins[] = {
+ TEGRA_PIN_ULPI_DATA1_PO2,
+};
+
+static const unsigned ulpi_data2_po3_pins[] = {
+ TEGRA_PIN_ULPI_DATA2_PO3,
+};
+
+static const unsigned ulpi_data3_po4_pins[] = {
+ TEGRA_PIN_ULPI_DATA3_PO4,
+};
+
+static const unsigned ulpi_data4_po5_pins[] = {
+ TEGRA_PIN_ULPI_DATA4_PO5,
+};
+
+static const unsigned ulpi_data5_po6_pins[] = {
+ TEGRA_PIN_ULPI_DATA5_PO6,
+};
+
+static const unsigned ulpi_data6_po7_pins[] = {
+ TEGRA_PIN_ULPI_DATA6_PO7,
+};
+
+static const unsigned dap3_fs_pp0_pins[] = {
+ TEGRA_PIN_DAP3_FS_PP0,
+};
+
+static const unsigned dap3_din_pp1_pins[] = {
+ TEGRA_PIN_DAP3_DIN_PP1,
+};
+
+static const unsigned dap3_dout_pp2_pins[] = {
+ TEGRA_PIN_DAP3_DOUT_PP2,
+};
+
+static const unsigned dap3_sclk_pp3_pins[] = {
+ TEGRA_PIN_DAP3_SCLK_PP3,
+};
+
+static const unsigned dap4_fs_pp4_pins[] = {
+ TEGRA_PIN_DAP4_FS_PP4,
+};
+
+static const unsigned dap4_din_pp5_pins[] = {
+ TEGRA_PIN_DAP4_DIN_PP5,
+};
+
+static const unsigned dap4_dout_pp6_pins[] = {
+ TEGRA_PIN_DAP4_DOUT_PP6,
+};
+
+static const unsigned dap4_sclk_pp7_pins[] = {
+ TEGRA_PIN_DAP4_SCLK_PP7,
+};
+
+static const unsigned kb_col0_pq0_pins[] = {
+ TEGRA_PIN_KB_COL0_PQ0,
+};
+
+static const unsigned kb_col1_pq1_pins[] = {
+ TEGRA_PIN_KB_COL1_PQ1,
+};
+
+static const unsigned kb_col2_pq2_pins[] = {
+ TEGRA_PIN_KB_COL2_PQ2,
+};
+
+static const unsigned kb_col3_pq3_pins[] = {
+ TEGRA_PIN_KB_COL3_PQ3,
+};
+
+static const unsigned kb_col4_pq4_pins[] = {
+ TEGRA_PIN_KB_COL4_PQ4,
+};
+
+static const unsigned kb_col5_pq5_pins[] = {
+ TEGRA_PIN_KB_COL5_PQ5,
+};
+
+static const unsigned kb_col6_pq6_pins[] = {
+ TEGRA_PIN_KB_COL6_PQ6,
+};
+
+static const unsigned kb_col7_pq7_pins[] = {
+ TEGRA_PIN_KB_COL7_PQ7,
+};
+
+static const unsigned kb_row0_pr0_pins[] = {
+ TEGRA_PIN_KB_ROW0_PR0,
+};
+
+static const unsigned kb_row1_pr1_pins[] = {
+ TEGRA_PIN_KB_ROW1_PR1,
+};
+
+static const unsigned kb_row2_pr2_pins[] = {
+ TEGRA_PIN_KB_ROW2_PR2,
+};
+
+static const unsigned kb_row3_pr3_pins[] = {
+ TEGRA_PIN_KB_ROW3_PR3,
+};
+
+static const unsigned kb_row4_pr4_pins[] = {
+ TEGRA_PIN_KB_ROW4_PR4,
+};
+
+static const unsigned kb_row5_pr5_pins[] = {
+ TEGRA_PIN_KB_ROW5_PR5,
+};
+
+static const unsigned kb_row6_pr6_pins[] = {
+ TEGRA_PIN_KB_ROW6_PR6,
+};
+
+static const unsigned kb_row7_pr7_pins[] = {
+ TEGRA_PIN_KB_ROW7_PR7,
+};
+
+static const unsigned kb_row8_ps0_pins[] = {
+ TEGRA_PIN_KB_ROW8_PS0,
+};
+
+static const unsigned kb_row9_ps1_pins[] = {
+ TEGRA_PIN_KB_ROW9_PS1,
+};
+
+static const unsigned kb_row10_ps2_pins[] = {
+ TEGRA_PIN_KB_ROW10_PS2,
+};
+
+static const unsigned gen2_i2c_scl_pt5_pins[] = {
+ TEGRA_PIN_GEN2_I2C_SCL_PT5,
+};
+
+static const unsigned gen2_i2c_sda_pt6_pins[] = {
+ TEGRA_PIN_GEN2_I2C_SDA_PT6,
+};
+
+static const unsigned sdmmc4_cmd_pt7_pins[] = {
+ TEGRA_PIN_SDMMC4_CMD_PT7,
+};
+
+static const unsigned pu0_pins[] = {
+ TEGRA_PIN_PU0,
+};
+
+static const unsigned pu1_pins[] = {
+ TEGRA_PIN_PU1,
+};
+
+static const unsigned pu2_pins[] = {
+ TEGRA_PIN_PU2,
+};
+
+static const unsigned pu3_pins[] = {
+ TEGRA_PIN_PU3,
+};
+
+static const unsigned pu4_pins[] = {
+ TEGRA_PIN_PU4,
+};
+
+static const unsigned pu5_pins[] = {
+ TEGRA_PIN_PU5,
+};
+
+static const unsigned pu6_pins[] = {
+ TEGRA_PIN_PU6,
+};
+
+static const unsigned pv0_pins[] = {
+ TEGRA_PIN_PV0,
+};
+
+static const unsigned pv1_pins[] = {
+ TEGRA_PIN_PV1,
+};
+
+static const unsigned sdmmc3_cd_n_pv2_pins[] = {
+ TEGRA_PIN_SDMMC3_CD_N_PV2,
+};
+
+static const unsigned sdmmc1_wp_n_pv3_pins[] = {
+ TEGRA_PIN_SDMMC1_WP_N_PV3,
+};
+
+static const unsigned ddc_scl_pv4_pins[] = {
+ TEGRA_PIN_DDC_SCL_PV4,
+};
+
+static const unsigned ddc_sda_pv5_pins[] = {
+ TEGRA_PIN_DDC_SDA_PV5,
+};
+
+static const unsigned gpio_w2_aud_pw2_pins[] = {
+ TEGRA_PIN_GPIO_W2_AUD_PW2,
+};
+
+static const unsigned gpio_w3_aud_pw3_pins[] = {
+ TEGRA_PIN_GPIO_W3_AUD_PW3,
+};
+
+static const unsigned clk1_out_pw4_pins[] = {
+ TEGRA_PIN_CLK1_OUT_PW4,
+};
+
+static const unsigned clk2_out_pw5_pins[] = {
+ TEGRA_PIN_CLK2_OUT_PW5,
+};
+
+static const unsigned uart3_txd_pw6_pins[] = {
+ TEGRA_PIN_UART3_TXD_PW6,
+};
+
+static const unsigned uart3_rxd_pw7_pins[] = {
+ TEGRA_PIN_UART3_RXD_PW7,
+};
+
+static const unsigned dvfs_pwm_px0_pins[] = {
+ TEGRA_PIN_DVFS_PWM_PX0,
+};
+
+static const unsigned gpio_x1_aud_px1_pins[] = {
+ TEGRA_PIN_GPIO_X1_AUD_PX1,
+};
+
+static const unsigned dvfs_clk_px2_pins[] = {
+ TEGRA_PIN_DVFS_CLK_PX2,
+};
+
+static const unsigned gpio_x3_aud_px3_pins[] = {
+ TEGRA_PIN_GPIO_X3_AUD_PX3,
+};
+
+static const unsigned gpio_x4_aud_px4_pins[] = {
+ TEGRA_PIN_GPIO_X4_AUD_PX4,
+};
+
+static const unsigned gpio_x5_aud_px5_pins[] = {
+ TEGRA_PIN_GPIO_X5_AUD_PX5,
+};
+
+static const unsigned gpio_x6_aud_px6_pins[] = {
+ TEGRA_PIN_GPIO_X6_AUD_PX6,
+};
+
+static const unsigned gpio_x7_aud_px7_pins[] = {
+ TEGRA_PIN_GPIO_X7_AUD_PX7,
+};
+
+static const unsigned ulpi_clk_py0_pins[] = {
+ TEGRA_PIN_ULPI_CLK_PY0,
+};
+
+static const unsigned ulpi_dir_py1_pins[] = {
+ TEGRA_PIN_ULPI_DIR_PY1,
+};
+
+static const unsigned ulpi_nxt_py2_pins[] = {
+ TEGRA_PIN_ULPI_NXT_PY2,
+};
+
+static const unsigned ulpi_stp_py3_pins[] = {
+ TEGRA_PIN_ULPI_STP_PY3,
+};
+
+static const unsigned sdmmc1_dat3_py4_pins[] = {
+ TEGRA_PIN_SDMMC1_DAT3_PY4,
+};
+
+static const unsigned sdmmc1_dat2_py5_pins[] = {
+ TEGRA_PIN_SDMMC1_DAT2_PY5,
+};
+
+static const unsigned sdmmc1_dat1_py6_pins[] = {
+ TEGRA_PIN_SDMMC1_DAT1_PY6,
+};
+
+static const unsigned sdmmc1_dat0_py7_pins[] = {
+ TEGRA_PIN_SDMMC1_DAT0_PY7,
+};
+
+static const unsigned sdmmc1_clk_pz0_pins[] = {
+ TEGRA_PIN_SDMMC1_CLK_PZ0,
+};
+
+static const unsigned sdmmc1_cmd_pz1_pins[] = {
+ TEGRA_PIN_SDMMC1_CMD_PZ1,
+};
+
+static const unsigned sys_clk_req_pz5_pins[] = {
+ TEGRA_PIN_SYS_CLK_REQ_PZ5,
+};
+
+static const unsigned pwr_i2c_scl_pz6_pins[] = {
+ TEGRA_PIN_PWR_I2C_SCL_PZ6,
+};
+
+static const unsigned pwr_i2c_sda_pz7_pins[] = {
+ TEGRA_PIN_PWR_I2C_SDA_PZ7,
+};
+
+static const unsigned sdmmc4_dat0_paa0_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT0_PAA0,
+};
+
+static const unsigned sdmmc4_dat1_paa1_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT1_PAA1,
+};
+
+static const unsigned sdmmc4_dat2_paa2_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT2_PAA2,
+};
+
+static const unsigned sdmmc4_dat3_paa3_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT3_PAA3,
+};
+
+static const unsigned sdmmc4_dat4_paa4_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT4_PAA4,
+};
+
+static const unsigned sdmmc4_dat5_paa5_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT5_PAA5,
+};
+
+static const unsigned sdmmc4_dat6_paa6_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT6_PAA6,
+};
+
+static const unsigned sdmmc4_dat7_paa7_pins[] = {
+ TEGRA_PIN_SDMMC4_DAT7_PAA7,
+};
+
+static const unsigned pbb0_pins[] = {
+ TEGRA_PIN_PBB0,
+};
+
+static const unsigned cam_i2c_scl_pbb1_pins[] = {
+ TEGRA_PIN_CAM_I2C_SCL_PBB1,
+};
+
+static const unsigned cam_i2c_sda_pbb2_pins[] = {
+ TEGRA_PIN_CAM_I2C_SDA_PBB2,
+};
+
+static const unsigned pbb3_pins[] = {
+ TEGRA_PIN_PBB3,
+};
+
+static const unsigned pbb4_pins[] = {
+ TEGRA_PIN_PBB4,
+};
+
+static const unsigned pbb5_pins[] = {
+ TEGRA_PIN_PBB5,
+};
+
+static const unsigned pbb6_pins[] = {
+ TEGRA_PIN_PBB6,
+};
+
+static const unsigned pbb7_pins[] = {
+ TEGRA_PIN_PBB7,
+};
+
+static const unsigned cam_mclk_pcc0_pins[] = {
+ TEGRA_PIN_CAM_MCLK_PCC0,
+};
+
+static const unsigned pcc1_pins[] = {
+ TEGRA_PIN_PCC1,
+};
+
+static const unsigned pcc2_pins[] = {
+ TEGRA_PIN_PCC2,
+};
+
+static const unsigned sdmmc4_clk_pcc4_pins[] = {
+ TEGRA_PIN_SDMMC4_CLK_PCC4,
+};
+
+static const unsigned clk2_req_pcc5_pins[] = {
+ TEGRA_PIN_CLK2_REQ_PCC5,
+};
+
+static const unsigned clk3_out_pee0_pins[] = {
+ TEGRA_PIN_CLK3_OUT_PEE0,
+};
+
+static const unsigned clk3_req_pee1_pins[] = {
+ TEGRA_PIN_CLK3_REQ_PEE1,
+};
+
+static const unsigned clk1_req_pee2_pins[] = {
+ TEGRA_PIN_CLK1_REQ_PEE2,
+};
+
+static const unsigned hdmi_cec_pee3_pins[] = {
+ TEGRA_PIN_HDMI_CEC_PEE3,
+};
+
+static const unsigned sdmmc3_clk_lb_out_pee4_pins[] = {
+ TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4,
+};
+
+static const unsigned sdmmc3_clk_lb_in_pee5_pins[] = {
+ TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5,
+};
+
+static const unsigned core_pwr_req_pins[] = {
+ TEGRA_PIN_CORE_PWR_REQ,
+};
+
+static const unsigned cpu_pwr_req_pins[] = {
+ TEGRA_PIN_CPU_PWR_REQ,
+};
+
+static const unsigned owr_pins[] = {
+ TEGRA_PIN_OWR,
+};
+
+static const unsigned pwr_int_n_pins[] = {
+ TEGRA_PIN_PWR_INT_N,
+};
+
+static const unsigned reset_out_n_pins[] = {
+ TEGRA_PIN_RESET_OUT_N,
+};
+
+static const unsigned drive_ao1_pins[] = {
+ TEGRA_PIN_KB_ROW0_PR0,
+ TEGRA_PIN_KB_ROW1_PR1,
+ TEGRA_PIN_KB_ROW2_PR2,
+ TEGRA_PIN_KB_ROW3_PR3,
+ TEGRA_PIN_KB_ROW4_PR4,
+ TEGRA_PIN_KB_ROW5_PR5,
+ TEGRA_PIN_KB_ROW6_PR6,
+ TEGRA_PIN_KB_ROW7_PR7,
+ TEGRA_PIN_PWR_I2C_SCL_PZ6,
+ TEGRA_PIN_PWR_I2C_SDA_PZ7,
+};
+
+static const unsigned drive_ao2_pins[] = {
+ TEGRA_PIN_CLK_32K_OUT_PA0,
+ TEGRA_PIN_KB_COL0_PQ0,
+ TEGRA_PIN_KB_COL1_PQ1,
+ TEGRA_PIN_KB_COL2_PQ2,
+ TEGRA_PIN_KB_COL3_PQ3,
+ TEGRA_PIN_KB_COL4_PQ4,
+ TEGRA_PIN_KB_COL5_PQ5,
+ TEGRA_PIN_KB_COL6_PQ6,
+ TEGRA_PIN_KB_COL7_PQ7,
+ TEGRA_PIN_KB_ROW8_PS0,
+ TEGRA_PIN_KB_ROW9_PS1,
+ TEGRA_PIN_KB_ROW10_PS2,
+ TEGRA_PIN_SYS_CLK_REQ_PZ5,
+ TEGRA_PIN_CORE_PWR_REQ,
+ TEGRA_PIN_CPU_PWR_REQ,
+ TEGRA_PIN_RESET_OUT_N,
+};
+
+static const unsigned drive_at1_pins[] = {
+ TEGRA_PIN_GMI_AD8_PH0,
+ TEGRA_PIN_GMI_AD9_PH1,
+ TEGRA_PIN_GMI_AD10_PH2,
+ TEGRA_PIN_GMI_AD11_PH3,
+ TEGRA_PIN_GMI_AD12_PH4,
+ TEGRA_PIN_GMI_AD13_PH5,
+ TEGRA_PIN_GMI_AD14_PH6,
+ TEGRA_PIN_GMI_AD15_PH7,
+
+ TEGRA_PIN_GMI_IORDY_PI5,
+ TEGRA_PIN_GMI_CS7_N_PI6,
+};
+
+static const unsigned drive_at2_pins[] = {
+ TEGRA_PIN_GMI_AD0_PG0,
+ TEGRA_PIN_GMI_AD1_PG1,
+ TEGRA_PIN_GMI_AD2_PG2,
+ TEGRA_PIN_GMI_AD3_PG3,
+ TEGRA_PIN_GMI_AD4_PG4,
+ TEGRA_PIN_GMI_AD5_PG5,
+ TEGRA_PIN_GMI_AD6_PG6,
+ TEGRA_PIN_GMI_AD7_PG7,
+
+ TEGRA_PIN_GMI_WR_N_PI0,
+ TEGRA_PIN_GMI_OE_N_PI1,
+ TEGRA_PIN_GMI_CS6_N_PI3,
+ TEGRA_PIN_GMI_RST_N_PI4,
+ TEGRA_PIN_GMI_WAIT_PI7,
+
+ TEGRA_PIN_GMI_DQS_P_PJ3,
+
+ TEGRA_PIN_GMI_ADV_N_PK0,
+ TEGRA_PIN_GMI_CLK_PK1,
+ TEGRA_PIN_GMI_CS4_N_PK2,
+ TEGRA_PIN_GMI_CS2_N_PK3,
+ TEGRA_PIN_GMI_CS3_N_PK4,
+};
+
+static const unsigned drive_at3_pins[] = {
+ TEGRA_PIN_GMI_WP_N_PC7,
+ TEGRA_PIN_GMI_CS0_N_PJ0,
+};
+
+static const unsigned drive_at4_pins[] = {
+ TEGRA_PIN_GMI_A17_PB0,
+ TEGRA_PIN_GMI_A18_PB1,
+ TEGRA_PIN_GMI_CS1_N_PJ2,
+ TEGRA_PIN_GMI_A16_PJ7,
+ TEGRA_PIN_GMI_A19_PK7,
+};
+
+static const unsigned drive_at5_pins[] = {
+ TEGRA_PIN_GEN2_I2C_SCL_PT5,
+ TEGRA_PIN_GEN2_I2C_SDA_PT6,
+};
+
+static const unsigned drive_cdev1_pins[] = {
+ TEGRA_PIN_CLK1_OUT_PW4,
+ TEGRA_PIN_CLK1_REQ_PEE2,
+};
+
+static const unsigned drive_cdev2_pins[] = {
+ TEGRA_PIN_CLK2_OUT_PW5,
+ TEGRA_PIN_CLK2_REQ_PCC5,
+ TEGRA_PIN_SDMMC1_WP_N_PV3,
+};
+
+static const unsigned drive_dap1_pins[] = {
+ TEGRA_PIN_DAP1_FS_PN0,
+ TEGRA_PIN_DAP1_DIN_PN1,
+ TEGRA_PIN_DAP1_DOUT_PN2,
+ TEGRA_PIN_DAP1_SCLK_PN3,
+};
+
+static const unsigned drive_dap2_pins[] = {
+ TEGRA_PIN_DAP2_FS_PA2,
+ TEGRA_PIN_DAP2_SCLK_PA3,
+ TEGRA_PIN_DAP2_DIN_PA4,
+ TEGRA_PIN_DAP2_DOUT_PA5,
+};
+
+static const unsigned drive_dap3_pins[] = {
+ TEGRA_PIN_DAP3_FS_PP0,
+ TEGRA_PIN_DAP3_DIN_PP1,
+ TEGRA_PIN_DAP3_DOUT_PP2,
+ TEGRA_PIN_DAP3_SCLK_PP3,
+};
+
+static const unsigned drive_dap4_pins[] = {
+ TEGRA_PIN_DAP4_FS_PP4,
+ TEGRA_PIN_DAP4_DIN_PP5,
+ TEGRA_PIN_DAP4_DOUT_PP6,
+ TEGRA_PIN_DAP4_SCLK_PP7,
+};
+
+static const unsigned drive_dbg_pins[] = {
+ TEGRA_PIN_GEN1_I2C_SCL_PC4,
+ TEGRA_PIN_GEN1_I2C_SDA_PC5,
+ TEGRA_PIN_PU0,
+ TEGRA_PIN_PU1,
+ TEGRA_PIN_PU2,
+ TEGRA_PIN_PU3,
+ TEGRA_PIN_PU4,
+ TEGRA_PIN_PU5,
+ TEGRA_PIN_PU6,
+};
+
+static const unsigned drive_sdio3_pins[] = {
+ TEGRA_PIN_SDMMC3_CLK_PA6,
+ TEGRA_PIN_SDMMC3_CMD_PA7,
+ TEGRA_PIN_SDMMC3_DAT3_PB4,
+ TEGRA_PIN_SDMMC3_DAT2_PB5,
+ TEGRA_PIN_SDMMC3_DAT1_PB6,
+ TEGRA_PIN_SDMMC3_DAT0_PB7,
+ TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4,
+ TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5,
+};
+
+static const unsigned drive_spi_pins[] = {
+ TEGRA_PIN_DVFS_PWM_PX0,
+ TEGRA_PIN_GPIO_X1_AUD_PX1,
+ TEGRA_PIN_DVFS_CLK_PX2,
+ TEGRA_PIN_GPIO_X3_AUD_PX3,
+ TEGRA_PIN_GPIO_X4_AUD_PX4,
+ TEGRA_PIN_GPIO_X5_AUD_PX5,
+ TEGRA_PIN_GPIO_X6_AUD_PX6,
+ TEGRA_PIN_GPIO_X7_AUD_PX7,
+ TEGRA_PIN_GPIO_W2_AUD_PW2,
+ TEGRA_PIN_GPIO_W3_AUD_PW3,
+};
+
+static const unsigned drive_uaa_pins[] = {
+ TEGRA_PIN_ULPI_DATA0_PO1,
+ TEGRA_PIN_ULPI_DATA1_PO2,
+ TEGRA_PIN_ULPI_DATA2_PO3,
+ TEGRA_PIN_ULPI_DATA3_PO4,
+};
+
+static const unsigned drive_uab_pins[] = {
+ TEGRA_PIN_ULPI_DATA7_PO0,
+ TEGRA_PIN_ULPI_DATA4_PO5,
+ TEGRA_PIN_ULPI_DATA5_PO6,
+ TEGRA_PIN_ULPI_DATA6_PO7,
+ TEGRA_PIN_PV0,
+ TEGRA_PIN_PV1,
+};
+
+static const unsigned drive_uart2_pins[] = {
+ TEGRA_PIN_UART2_TXD_PC2,
+ TEGRA_PIN_UART2_RXD_PC3,
+ TEGRA_PIN_UART2_CTS_N_PJ5,
+ TEGRA_PIN_UART2_RTS_N_PJ6,
+};
+
+static const unsigned drive_uart3_pins[] = {
+ TEGRA_PIN_UART3_CTS_N_PA1,
+ TEGRA_PIN_UART3_RTS_N_PC0,
+ TEGRA_PIN_UART3_TXD_PW6,
+ TEGRA_PIN_UART3_RXD_PW7,
+};
+
+static const unsigned drive_sdio1_pins[] = {
+ TEGRA_PIN_SDMMC1_DAT3_PY4,
+ TEGRA_PIN_SDMMC1_DAT2_PY5,
+ TEGRA_PIN_SDMMC1_DAT1_PY6,
+ TEGRA_PIN_SDMMC1_DAT0_PY7,
+ TEGRA_PIN_SDMMC1_CLK_PZ0,
+ TEGRA_PIN_SDMMC1_CMD_PZ1,
+};
+
+static const unsigned drive_ddc_pins[] = {
+ TEGRA_PIN_DDC_SCL_PV4,
+ TEGRA_PIN_DDC_SDA_PV5,
+};
+
+static const unsigned drive_gma_pins[] = {
+ TEGRA_PIN_SDMMC4_CLK_PCC4,
+ TEGRA_PIN_SDMMC4_CMD_PT7,
+ TEGRA_PIN_SDMMC4_DAT0_PAA0,
+ TEGRA_PIN_SDMMC4_DAT1_PAA1,
+ TEGRA_PIN_SDMMC4_DAT2_PAA2,
+ TEGRA_PIN_SDMMC4_DAT3_PAA3,
+ TEGRA_PIN_SDMMC4_DAT4_PAA4,
+ TEGRA_PIN_SDMMC4_DAT5_PAA5,
+ TEGRA_PIN_SDMMC4_DAT6_PAA6,
+ TEGRA_PIN_SDMMC4_DAT7_PAA7,
+};
+
+static const unsigned drive_gme_pins[] = {
+ TEGRA_PIN_PBB0,
+ TEGRA_PIN_CAM_I2C_SCL_PBB1,
+ TEGRA_PIN_CAM_I2C_SDA_PBB2,
+ TEGRA_PIN_PBB3,
+ TEGRA_PIN_PCC2,
+};
+
+static const unsigned drive_gmf_pins[] = {
+ TEGRA_PIN_PBB4,
+ TEGRA_PIN_PBB5,
+ TEGRA_PIN_PBB6,
+ TEGRA_PIN_PBB7,
+};
+
+static const unsigned drive_gmg_pins[] = {
+ TEGRA_PIN_CAM_MCLK_PCC0,
+};
+
+static const unsigned drive_gmh_pins[] = {
+ TEGRA_PIN_PCC1,
+};
+
+static const unsigned drive_owr_pins[] = {
+ TEGRA_PIN_SDMMC3_CD_N_PV2,
+};
+
+static const unsigned drive_uda_pins[] = {
+ TEGRA_PIN_ULPI_CLK_PY0,
+ TEGRA_PIN_ULPI_DIR_PY1,
+ TEGRA_PIN_ULPI_NXT_PY2,
+ TEGRA_PIN_ULPI_STP_PY3,
+};
+
+static const unsigned drive_dev3_pins[] = {
+ TEGRA_PIN_CLK3_OUT_PEE0,
+ TEGRA_PIN_CLK3_REQ_PEE1,
+};
+
+enum tegra_mux {
+ TEGRA_MUX_BLINK,
+ TEGRA_MUX_CEC,
+ TEGRA_MUX_CLDVFS,
+ TEGRA_MUX_CLK12,
+ TEGRA_MUX_CPU,
+ TEGRA_MUX_DAP,
+ TEGRA_MUX_DAP1,
+ TEGRA_MUX_DAP2,
+ TEGRA_MUX_DEV3,
+ TEGRA_MUX_DISPLAYA,
+ TEGRA_MUX_DISPLAYA_ALT,
+ TEGRA_MUX_DISPLAYB,
+ TEGRA_MUX_DTV,
+ TEGRA_MUX_EMC_DLL,
+ TEGRA_MUX_EXTPERIPH1,
+ TEGRA_MUX_EXTPERIPH2,
+ TEGRA_MUX_EXTPERIPH3,
+ TEGRA_MUX_GMI,
+ TEGRA_MUX_GMI_ALT,
+ TEGRA_MUX_HDA,
+ TEGRA_MUX_HSI,
+ TEGRA_MUX_I2C1,
+ TEGRA_MUX_I2C2,
+ TEGRA_MUX_I2C3,
+ TEGRA_MUX_I2C4,
+ TEGRA_MUX_I2CPWR,
+ TEGRA_MUX_I2S0,
+ TEGRA_MUX_I2S1,
+ TEGRA_MUX_I2S2,
+ TEGRA_MUX_I2S3,
+ TEGRA_MUX_I2S4,
+ TEGRA_MUX_IRDA,
+ TEGRA_MUX_KBC,
+ TEGRA_MUX_NAND,
+ TEGRA_MUX_NAND_ALT,
+ TEGRA_MUX_OWR,
+ TEGRA_MUX_PMI,
+ TEGRA_MUX_PWM0,
+ TEGRA_MUX_PWM1,
+ TEGRA_MUX_PWM2,
+ TEGRA_MUX_PWM3,
+ TEGRA_MUX_PWRON,
+ TEGRA_MUX_RESET_OUT_N,
+ TEGRA_MUX_RSVD1,
+ TEGRA_MUX_RSVD2,
+ TEGRA_MUX_RSVD3,
+ TEGRA_MUX_RSVD4,
+ TEGRA_MUX_SDMMC1,
+ TEGRA_MUX_SDMMC2,
+ TEGRA_MUX_SDMMC3,
+ TEGRA_MUX_SDMMC4,
+ TEGRA_MUX_SOC,
+ TEGRA_MUX_SPDIF,
+ TEGRA_MUX_SPI1,
+ TEGRA_MUX_SPI2,
+ TEGRA_MUX_SPI3,
+ TEGRA_MUX_SPI4,
+ TEGRA_MUX_SPI5,
+ TEGRA_MUX_SPI6,
+ TEGRA_MUX_SYSCLK,
+ TEGRA_MUX_TRACE,
+ TEGRA_MUX_UARTA,
+ TEGRA_MUX_UARTB,
+ TEGRA_MUX_UARTC,
+ TEGRA_MUX_UARTD,
+ TEGRA_MUX_ULPI,
+ TEGRA_MUX_USB,
+ TEGRA_MUX_VGP1,
+ TEGRA_MUX_VGP2,
+ TEGRA_MUX_VGP3,
+ TEGRA_MUX_VGP4,
+ TEGRA_MUX_VGP5,
+ TEGRA_MUX_VGP6,
+ TEGRA_MUX_VI,
+ TEGRA_MUX_VI_ALT1,
+ TEGRA_MUX_VI_ALT3,
+};
+
+static const char * const blink_groups[] = {
+ "clk_32k_out_pa0",
+};
+
+static const char * const cec_groups[] = {
+ "hdmi_cec_pee3",
+};
+
+static const char * const cldvfs_groups[] = {
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "kb_row7_pr7",
+ "kb_row8_ps0",
+ "dvfs_pwm_px0",
+ "dvfs_clk_px2",
+};
+
+static const char * const clk12_groups[] = {
+ "sdmmc1_wp_n_pv3",
+ "sdmmc1_clk_pz0",
+};
+
+static const char * const cpu_groups[] = {
+ "cpu_pwr_req",
+};
+
+static const char * const dap_groups[] = {
+ "clk1_req_pee2",
+ "clk2_req_pcc5",
+};
+
+static const char * const dap1_groups[] = {
+ "clk1_req_pee2",
+};
+
+static const char * const dap2_groups[] = {
+ "clk1_out_pw4",
+ "gpio_x4_aud_px4",
+};
+
+static const char * const dev3_groups[] = {
+ "clk3_req_pee1",
+};
+
+static const char * const displaya_groups[] = {
+ "dap3_fs_pp0",
+ "dap3_din_pp1",
+ "dap3_dout_pp2",
+ "dap3_sclk_pp3",
+ "uart3_rts_n_pc0",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6",
+ "kb_row3_pr3",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_col3_pq3",
+ "sdmmc3_dat2_pb5",
+};
+
+static const char * const displaya_alt_groups[] = {
+ "kb_row6_pr6",
+};
+
+static const char * const displayb_groups[] = {
+ "dap3_fs_pp0",
+ "dap3_din_pp1",
+ "dap3_dout_pp2",
+ "dap3_sclk_pp3",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6",
+ "kb_row3_pr3",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "sdmmc3_dat3_pb4",
+};
+
+static const char * const dtv_groups[] = {
+ "uart3_cts_n_pa1",
+ "uart3_rts_n_pc0",
+ "dap4_fs_pp4",
+ "dap4_dout_pp6",
+ "gmi_wait_pi7",
+ "gmi_ad8_ph0",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+};
+
+static const char * const emc_dll_groups[] = {
+ "kb_col0_pq0",
+ "kb_col1_pq1",
+};
+
+static const char * const extperiph1_groups[] = {
+ "clk1_out_pw4",
+};
+
+static const char * const extperiph2_groups[] = {
+ "clk2_out_pw5",
+};
+
+static const char * const extperiph3_groups[] = {
+ "clk3_out_pee0",
+};
+
+static const char * const gmi_groups[] = {
+ "gmi_wp_n_pc7",
+
+ "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_wr_n_pi0",
+ "gmi_oe_n_pi1",
+ "gmi_cs6_n_pi3",
+ "gmi_rst_n_pi4",
+ "gmi_iordy_pi5",
+ "gmi_cs7_n_pi6",
+ "gmi_wait_pi7",
+ "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_dqs_p_pj3",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_cs3_n_pk4",
+ "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7",
+ "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7",
+ "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+};
+
+static const char * const gmi_alt_groups[] = {
+ "gmi_wp_n_pc7",
+ "gmi_cs3_n_pk4",
+ "gmi_a16_pj7",
+};
+
+static const char * const hda_groups[] = {
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+};
+
+static const char * const hsi_groups[] = {
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0",
+};
+
+static const char * const i2c1_groups[] = {
+ "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5",
+ "gpio_w2_aud_pw2",
+ "gpio_w3_aud_pw3",
+};
+
+static const char * const i2c2_groups[] = {
+ "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6",
+};
+
+static const char * const i2c3_groups[] = {
+ "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2",
+};
+
+static const char * const i2c4_groups[] = {
+ "ddc_scl_pv4",
+ "ddc_sda_pv5",
+};
+
+static const char * const i2cpwr_groups[] = {
+ "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7",
+};
+
+static const char * const i2s0_groups[] = {
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+};
+
+static const char * const i2s1_groups[] = {
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+};
+
+static const char * const i2s2_groups[] = {
+ "dap3_fs_pp0",
+ "dap3_din_pp1",
+ "dap3_dout_pp2",
+ "dap3_sclk_pp3",
+};
+
+static const char * const i2s3_groups[] = {
+ "dap4_fs_pp4",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7",
+};
+
+static const char * const i2s4_groups[] = {
+ "pcc1",
+ "pbb0",
+ "pbb7",
+ "pcc2",
+};
+
+static const char * const irda_groups[] = {
+ "uart2_rxd_pc3",
+ "uart2_txd_pc2",
+};
+
+static const char * const kbc_groups[] = {
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7",
+ "kb_row8_ps0",
+ "kb_row9_ps1",
+ "kb_row10_ps2",
+ "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+};
+
+static const char * const nand_groups[] = {
+ "gmi_wp_n_pc7",
+ "gmi_wait_pi7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs2_n_pk3",
+ "gmi_cs3_n_pk4",
+ "gmi_cs4_n_pk2",
+ "gmi_cs6_n_pi3",
+ "gmi_cs7_n_pi6",
+ "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_wr_n_pi0",
+ "gmi_oe_n_pi1",
+ "gmi_dqs_p_pj3",
+ "gmi_rst_n_pi4",
+};
+
+static const char * const nand_alt_groups[] = {
+ "gmi_cs6_n_pi3",
+ "gmi_cs7_n_pi6",
+ "gmi_rst_n_pi4",
+};
+
+static const char * const owr_groups[] = {
+ "pu0",
+ "kb_col4_pq4",
+ "owr",
+ "sdmmc3_cd_n_pv2",
+};
+
+static const char * const pmi_groups[] = {
+ "pwr_int_n",
+};
+
+static const char * const pwm0_groups[] = {
+ "sdmmc1_dat2_py5",
+ "uart3_rts_n_pc0",
+ "pu3",
+ "gmi_ad8_ph0",
+ "sdmmc3_dat3_pb4",
+};
+
+static const char * const pwm1_groups[] = {
+ "sdmmc1_dat1_py6",
+ "pu4",
+ "gmi_ad9_ph1",
+ "sdmmc3_dat2_pb5",
+};
+
+static const char * const pwm2_groups[] = {
+ "pu5",
+ "gmi_ad10_ph2",
+ "kb_col3_pq3",
+ "sdmmc3_dat1_pb6",
+};
+
+static const char * const pwm3_groups[] = {
+ "pu6",
+ "gmi_ad11_ph3",
+ "sdmmc3_cmd_pa7",
+};
+
+static const char * const pwron_groups[] = {
+ "core_pwr_req",
+};
+
+static const char * const reset_out_n_groups[] = {
+ "reset_out_n",
+};
+
+static const char * const rsvd1_groups[] = {
+ "pv1",
+ "hdmi_int_pn7",
+ "pu1",
+ "pu2",
+ "gmi_wp_n_pc7",
+ "gmi_adv_n_pk0",
+ "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_wr_n_pi0",
+ "gmi_oe_n_pi1",
+ "gpio_x4_aud_px4",
+ "gpio_x5_aud_px5",
+ "gpio_x7_aud_px7",
+
+ "reset_out_n",
+};
+
+static const char * const rsvd2_groups[] = {
+ "pv0",
+ "pv1",
+ "sdmmc1_dat0_py7",
+ "clk2_out_pw5",
+ "clk2_req_pcc5",
+ "hdmi_int_pn7",
+ "ddc_scl_pv4",
+ "ddc_sda_pv5",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7",
+ "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5",
+ "dap4_fs_pp4",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "gmi_iordy_pi5",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6",
+ "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_dat7_paa7",
+ "pcc1",
+ "pbb7",
+ "pcc2",
+ "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7",
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row7_pr7",
+ "kb_row8_ps0",
+ "kb_row9_ps1",
+ "kb_row10_ps2",
+ "kb_col1_pq1",
+ "kb_col2_pq2",
+ "kb_col5_pq5",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "sys_clk_req_pz5",
+ "core_pwr_req",
+ "cpu_pwr_req",
+ "pwr_int_n",
+ "owr",
+ "spdif_out_pk5",
+ "gpio_x1_aud_px1",
+ "sdmmc3_clk_pa6",
+ "sdmmc3_dat0_pb7",
+ "gpio_w2_aud_pw2",
+ "usb_vbus_en0_pn4",
+ "usb_vbus_en1_pn5",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5",
+ "reset_out_n",
+};
+
+static const char * const rsvd3_groups[] = {
+ "pv0",
+ "pv1",
+ "sdmmc1_clk_pz0",
+ "clk2_out_pw5",
+ "clk2_req_pcc5",
+ "hdmi_int_pn7",
+ "ddc_scl_pv4",
+ "ddc_sda_pv5",
+ "uart2_rts_n_pj6",
+ "uart2_cts_n_pj5",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7",
+ "pu0",
+ "pu1",
+ "pu2",
+ "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5",
+ "dap4_din_pp5",
+ "dap4_sclk_pp7",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "pcc1",
+ "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2",
+ "pbb7",
+ "pcc2",
+ "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7",
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3",
+ "kb_row9_ps1",
+ "kb_row10_ps2",
+ "clk_32k_out_pa0",
+ "sys_clk_req_pz5",
+ "core_pwr_req",
+ "cpu_pwr_req",
+ "pwr_int_n",
+ "owr",
+ "clk1_req_pee2",
+ "clk1_out_pw4",
+ "spdif_out_pk5",
+ "spdif_in_pk6",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "dvfs_pwm_px0",
+ "gpio_x1_aud_px1",
+ "gpio_x3_aud_px3",
+ "dvfs_clk_px2",
+ "sdmmc3_clk_pa6",
+ "sdmmc3_dat0_pb7",
+ "hdmi_cec_pee3",
+ "sdmmc3_cd_n_pv2",
+ "usb_vbus_en0_pn4",
+ "usb_vbus_en1_pn5",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5",
+ "reset_out_n",
+};
+
+static const char * const rsvd4_groups[] = {
+ "pv0",
+ "pv1",
+ "sdmmc1_clk_pz0",
+ "clk2_out_pw5",
+ "clk2_req_pcc5",
+ "hdmi_int_pn7",
+ "ddc_scl_pv4",
+ "ddc_sda_pv5",
+ "pu0",
+ "pu1",
+ "pu2",
+ "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5",
+ "dap4_fs_pp4",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_rst_n_pi4",
+ "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6",
+ "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7",
+ "cam_mclk_pcc0",
+ "pcc1",
+ "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2",
+ "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6",
+ "pbb7",
+ "pcc2",
+ "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7",
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_col2_pq2",
+ "kb_col5_pq5",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "clk_32k_out_pa0",
+ "sys_clk_req_pz5",
+ "core_pwr_req",
+ "cpu_pwr_req",
+ "pwr_int_n",
+ "owr",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "clk1_req_pee2",
+ "clk1_out_pw4",
+ "spdif_in_pk6",
+ "spdif_out_pk5",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "dvfs_pwm_px0",
+ "gpio_x1_aud_px1",
+ "gpio_x3_aud_px3",
+ "dvfs_clk_px2",
+ "gpio_x5_aud_px5",
+ "gpio_x6_aud_px6",
+ "gpio_x7_aud_px7",
+ "sdmmc3_cd_n_pv2",
+ "usb_vbus_en0_pn4",
+ "usb_vbus_en1_pn5",
+ "sdmmc3_clk_lb_in_pee5",
+ "sdmmc3_clk_lb_out_pee4",
+};
+
+static const char * const sdmmc1_groups[] = {
+
+ "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat3_py4",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat0_py7",
+ "uart3_cts_n_pa1",
+ "kb_col5_pq5",
+ "sdmmc1_wp_n_pv3",
+};
+
+static const char * const sdmmc2_groups[] = {
+ "gmi_iordy_pi5",
+ "gmi_clk_pk1",
+ "gmi_cs2_n_pk3",
+ "gmi_cs3_n_pk4",
+ "gmi_cs7_n_pi6",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_dqs_p_pj3",
+};
+
+static const char * const sdmmc3_groups[] = {
+ "kb_col4_pq4",
+ "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "hdmi_cec_pee3",
+ "sdmmc3_cd_n_pv2",
+ "sdmmc3_clk_lb_in_pee5",
+ "sdmmc3_clk_lb_out_pee4",
+};
+
+static const char * const sdmmc4_groups[] = {
+ "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7",
+};
+
+static const char * const soc_groups[] = {
+ "gmi_cs1_n_pj2",
+ "gmi_oe_n_pi1",
+ "clk_32k_out_pa0",
+ "hdmi_cec_pee3",
+};
+
+static const char * const spdif_groups[] = {
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat3_py4",
+ "uart2_rxd_pc3",
+ "uart2_txd_pc2",
+ "spdif_in_pk6",
+ "spdif_out_pk5",
+};
+
+static const char * const spi1_groups[] = {
+ "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3",
+ "gpio_x3_aud_px3",
+ "gpio_x4_aud_px4",
+ "gpio_x5_aud_px5",
+ "gpio_x6_aud_px6",
+ "gpio_x7_aud_px7",
+ "gpio_w3_aud_pw3",
+};
+
+static const char * const spi2_groups[] = {
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col2_pq2",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "gpio_x4_aud_px4",
+ "gpio_x5_aud_px5",
+ "gpio_x6_aud_px6",
+ "gpio_x7_aud_px7",
+ "gpio_w2_aud_pw2",
+ "gpio_w3_aud_pw3",
+};
+
+static const char * const spi3_groups[] = {
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+};
+
+static const char * const spi4_groups[] = {
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat3_py4",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat0_py7",
+ "uart2_rxd_pc3",
+ "uart2_txd_pc2",
+ "uart2_rts_n_pj6",
+ "uart2_cts_n_pj5",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7",
+ "uart3_cts_n_pa1",
+ "gmi_wait_pi7",
+ "gmi_cs6_n_pi3",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_a19_pk7",
+ "gmi_wr_n_pi0",
+ "sdmmc1_wp_n_pv3",
+};
+
+static const char * const spi5_groups[] = {
+ "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3",
+ "dap3_fs_pp0",
+ "dap3_din_pp1",
+ "dap3_dout_pp2",
+ "dap3_sclk_pp3",
+};
+
+static const char * const spi6_groups[] = {
+ "dvfs_pwm_px0",
+ "gpio_x1_aud_px1",
+ "gpio_x3_aud_px3",
+ "dvfs_clk_px2",
+ "gpio_x6_aud_px6",
+ "gpio_w2_aud_pw2",
+ "gpio_w3_aud_pw3",
+};
+
+static const char * const sysclk_groups[] = {
+ "sys_clk_req_pz5",
+};
+
+static const char * const trace_groups[] = {
+ "gmi_iordy_pi5",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs2_n_pk3",
+ "gmi_cs4_n_pk2",
+ "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7",
+ "gmi_dqs_p_pj3",
+};
+
+static const char * const uarta_groups[] = {
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat3_py4",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat0_py7",
+ "uart2_rxd_pc3",
+ "uart2_txd_pc2",
+ "uart2_rts_n_pj6",
+ "uart2_cts_n_pj5",
+ "pu0",
+ "pu1",
+ "pu2",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "kb_row7_pr7",
+ "kb_row8_ps0",
+ "kb_row9_ps1",
+ "kb_row10_ps2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "sdmmc3_cmd_pa7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc1_wp_n_pv3",
+};
+
+static const char * const uartb_groups[] = {
+ "uart2_rts_n_pj6",
+ "uart2_cts_n_pj5",
+};
+
+static const char * const uartc_groups[] = {
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7",
+ "uart3_cts_n_pa1",
+ "uart3_rts_n_pc0",
+};
+
+static const char * const uartd_groups[] = {
+ "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3",
+ "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7",
+};
+
+static const char * const ulpi_groups[] = {
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0",
+ "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3",
+};
+
+static const char * const usb_groups[] = {
+ "pv0",
+ "pu6",
+ "gmi_cs0_n_pj0",
+ "gmi_cs4_n_pk2",
+ "gmi_ad11_ph3",
+ "kb_col0_pq0",
+ "spdif_in_pk6",
+ "usb_vbus_en0_pn4",
+ "usb_vbus_en1_pn5",
+};
+
+static const char * const vgp1_groups[] = {
+ "cam_i2c_scl_pbb1",
+};
+
+static const char * const vgp2_groups[] = {
+ "cam_i2c_sda_pbb2",
+};
+
+static const char * const vgp3_groups[] = {
+ "pbb3",
+};
+
+static const char * const vgp4_groups[] = {
+ "pbb4",
+};
+
+static const char * const vgp5_groups[] = {
+ "pbb5",
+};
+
+static const char * const vgp6_groups[] = {
+ "pbb6",
+};
+
+static const char * const vi_groups[] = {
+ "cam_mclk_pcc0",
+ "pbb0",
+};
+
+static const char * const vi_alt1_groups[] = {
+ "cam_mclk_pcc0",
+ "pbb0",
+};
+
+static const char * const vi_alt3_groups[] = {
+ "cam_mclk_pcc0",
+ "pbb0",
+};
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct tegra_function tegra114_functions[] = {
+ FUNCTION(blink),
+ FUNCTION(cec),
+ FUNCTION(cldvfs),
+ FUNCTION(clk12),
+ FUNCTION(cpu),
+ FUNCTION(dap),
+ FUNCTION(dap1),
+ FUNCTION(dap2),
+ FUNCTION(dev3),
+ FUNCTION(displaya),
+ FUNCTION(displaya_alt),
+ FUNCTION(displayb),
+ FUNCTION(dtv),
+ FUNCTION(emc_dll),
+ FUNCTION(extperiph1),
+ FUNCTION(extperiph2),
+ FUNCTION(extperiph3),
+ FUNCTION(gmi),
+ FUNCTION(gmi_alt),
+ FUNCTION(hda),
+ FUNCTION(hsi),
+ FUNCTION(i2c1),
+ FUNCTION(i2c2),
+ FUNCTION(i2c3),
+ FUNCTION(i2c4),
+ FUNCTION(i2cpwr),
+ FUNCTION(i2s0),
+ FUNCTION(i2s1),
+ FUNCTION(i2s2),
+ FUNCTION(i2s3),
+ FUNCTION(i2s4),
+ FUNCTION(irda),
+ FUNCTION(kbc),
+ FUNCTION(nand),
+ FUNCTION(nand_alt),
+ FUNCTION(owr),
+ FUNCTION(pmi),
+ FUNCTION(pwm0),
+ FUNCTION(pwm1),
+ FUNCTION(pwm2),
+ FUNCTION(pwm3),
+ FUNCTION(pwron),
+ FUNCTION(reset_out_n),
+ FUNCTION(rsvd1),
+ FUNCTION(rsvd2),
+ FUNCTION(rsvd3),
+ FUNCTION(rsvd4),
+ FUNCTION(sdmmc1),
+ FUNCTION(sdmmc2),
+ FUNCTION(sdmmc3),
+ FUNCTION(sdmmc4),
+ FUNCTION(soc),
+ FUNCTION(spdif),
+ FUNCTION(spi1),
+ FUNCTION(spi2),
+ FUNCTION(spi3),
+ FUNCTION(spi4),
+ FUNCTION(spi5),
+ FUNCTION(spi6),
+ FUNCTION(sysclk),
+ FUNCTION(trace),
+ FUNCTION(uarta),
+ FUNCTION(uartb),
+ FUNCTION(uartc),
+ FUNCTION(uartd),
+ FUNCTION(ulpi),
+ FUNCTION(usb),
+ FUNCTION(vgp1),
+ FUNCTION(vgp2),
+ FUNCTION(vgp3),
+ FUNCTION(vgp4),
+ FUNCTION(vgp5),
+ FUNCTION(vgp6),
+ FUNCTION(vi),
+ FUNCTION(vi_alt1),
+ FUNCTION(vi_alt3),
+};
+
+#define DRV_PINGROUP_REG_START 0x868 /* bank 0 */
+#define PINGROUP_REG_START 0x3000 /* bank 1 */
+
+#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_START)
+#define PINGROUP_REG_N(r) -1
+
+#define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior, rcv_sel) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .funcs = { \
+ TEGRA_MUX_##f0, \
+ TEGRA_MUX_##f1, \
+ TEGRA_MUX_##f2, \
+ TEGRA_MUX_##f3, \
+ }, \
+ .func_safe = TEGRA_MUX_##f_safe, \
+ .mux_reg = PINGROUP_REG_Y(r), \
+ .mux_bank = 1, \
+ .mux_bit = 0, \
+ .pupd_reg = PINGROUP_REG_Y(r), \
+ .pupd_bank = 1, \
+ .pupd_bit = 2, \
+ .tri_reg = PINGROUP_REG_Y(r), \
+ .tri_bank = 1, \
+ .tri_bit = 4, \
+ .einput_reg = PINGROUP_REG_Y(r), \
+ .einput_bank = 1, \
+ .einput_bit = 5, \
+ .odrain_reg = PINGROUP_REG_##od(r), \
+ .odrain_bank = 1, \
+ .odrain_bit = 6, \
+ .lock_reg = PINGROUP_REG_Y(r), \
+ .lock_bank = 1, \
+ .lock_bit = 7, \
+ .ioreset_reg = PINGROUP_REG_##ior(r), \
+ .ioreset_bank = 1, \
+ .ioreset_bit = 8, \
+ .rcv_sel_reg = PINGROUP_REG_##rcv_sel(r), \
+ .rcv_sel_bank = 1, \
+ .rcv_sel_bit = 9, \
+ .drv_reg = -1, \
+ .drvtype_reg = -1, \
+ }
+
+#define DRV_PINGROUP_DVRTYPE_Y(r) ((r) - DRV_PINGROUP_REG_START)
+#define DRV_PINGROUP_DVRTYPE_N(r) -1
+
+#define DRV_PINGROUP(pg_name, r, hsm_b, schmitt_b, lpmd_b, \
+ drvdn_b, drvdn_w, drvup_b, drvup_w, \
+ slwr_b, slwr_w, slwf_b, slwf_w, \
+ drvtype) \
+ { \
+ .name = "drive_" #pg_name, \
+ .pins = drive_##pg_name##_pins, \
+ .npins = ARRAY_SIZE(drive_##pg_name##_pins), \
+ .mux_reg = -1, \
+ .pupd_reg = -1, \
+ .tri_reg = -1, \
+ .einput_reg = -1, \
+ .odrain_reg = -1, \
+ .lock_reg = -1, \
+ .ioreset_reg = -1, \
+ .rcv_sel_reg = -1, \
+ .drv_reg = DRV_PINGROUP_DVRTYPE_Y(r), \
+ .drv_bank = 0, \
+ .hsm_bit = hsm_b, \
+ .schmitt_bit = schmitt_b, \
+ .lpmd_bit = lpmd_b, \
+ .drvdn_bit = drvdn_b, \
+ .drvdn_width = drvdn_w, \
+ .drvup_bit = drvup_b, \
+ .drvup_width = drvup_w, \
+ .slwr_bit = slwr_b, \
+ .slwr_width = slwr_w, \
+ .slwf_bit = slwf_b, \
+ .slwf_width = slwf_w, \
+ .drvtype_reg = DRV_PINGROUP_DVRTYPE_##drvtype(r), \
+ .drvtype_bank = 0, \
+ .drvtype_bit = 6, \
+ }
+
+static const struct tegra_pingroup tegra114_groups[] = {
+ /* pg_name, f0, f1, f2, f3, safe, r, od, ior, rcv_sel */
+ /* FIXME: Fill in correct data in safe column */
+ PINGROUP(ulpi_data0_po1, SPI3, HSI, UARTA, ULPI, ULPI, 0x3000, N, N, N),
+ PINGROUP(ulpi_data1_po2, SPI3, HSI, UARTA, ULPI, ULPI, 0x3004, N, N, N),
+ PINGROUP(ulpi_data2_po3, SPI3, HSI, UARTA, ULPI, ULPI, 0x3008, N, N, N),
+ PINGROUP(ulpi_data3_po4, SPI3, HSI, UARTA, ULPI, ULPI, 0x300c, N, N, N),
+ PINGROUP(ulpi_data4_po5, SPI2, HSI, UARTA, ULPI, ULPI, 0x3010, N, N, N),
+ PINGROUP(ulpi_data5_po6, SPI2, HSI, UARTA, ULPI, ULPI, 0x3014, N, N, N),
+ PINGROUP(ulpi_data6_po7, SPI2, HSI, UARTA, ULPI, ULPI, 0x3018, N, N, N),
+ PINGROUP(ulpi_data7_po0, SPI2, HSI, UARTA, ULPI, ULPI, 0x301c, N, N, N),
+ PINGROUP(ulpi_clk_py0, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3020, N, N, N),
+ PINGROUP(ulpi_dir_py1, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3024, N, N, N),
+ PINGROUP(ulpi_nxt_py2, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3028, N, N, N),
+ PINGROUP(ulpi_stp_py3, SPI1, SPI5, UARTD, ULPI, ULPI, 0x302c, N, N, N),
+ PINGROUP(dap3_fs_pp0, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3030, N, N, N),
+ PINGROUP(dap3_din_pp1, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3034, N, N, N),
+ PINGROUP(dap3_dout_pp2, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3038, N, N, N),
+ PINGROUP(dap3_sclk_pp3, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x303c, N, N, N),
+ PINGROUP(pv0, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x3040, N, N, N),
+ PINGROUP(pv1, RSVD1, RSVD2, RSVD3, RSVD4, RSVD4, 0x3044, N, N, N),
+ PINGROUP(sdmmc1_clk_pz0, SDMMC1, CLK12, RSVD3, RSVD4, RSVD4, 0x3048, N, N, N),
+ PINGROUP(sdmmc1_cmd_pz1, SDMMC1, SPDIF, SPI4, UARTA, SDMMC1, 0x304c, N, N, N),
+ PINGROUP(sdmmc1_dat3_py4, SDMMC1, SPDIF, SPI4, UARTA, SDMMC1, 0x3050, N, N, N),
+ PINGROUP(sdmmc1_dat2_py5, SDMMC1, PWM0, SPI4, UARTA, SDMMC1, 0x3054, N, N, N),
+ PINGROUP(sdmmc1_dat1_py6, SDMMC1, PWM1, SPI4, UARTA, SDMMC1, 0x3058, N, N, N),
+ PINGROUP(sdmmc1_dat0_py7, SDMMC1, RSVD2, SPI4, UARTA, RSVD2, 0x305c, N, N, N),
+ PINGROUP(clk2_out_pw5, EXTPERIPH2, RSVD2, RSVD3, RSVD4, RSVD4, 0x3068, N, N, N),
+ PINGROUP(clk2_req_pcc5, DAP, RSVD2, RSVD3, RSVD4, RSVD4, 0x306c, N, N, N),
+ PINGROUP(hdmi_int_pn7, RSVD1, RSVD2, RSVD3, RSVD4, RSVD4, 0x3110, N, N, Y),
+ PINGROUP(ddc_scl_pv4, I2C4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3114, N, N, Y),
+ PINGROUP(ddc_sda_pv5, I2C4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3118, N, N, Y),
+ PINGROUP(uart2_rxd_pc3, IRDA, SPDIF, UARTA, SPI4, IRDA, 0x3164, N, N, N),
+ PINGROUP(uart2_txd_pc2, IRDA, SPDIF, UARTA, SPI4, IRDA, 0x3168, N, N, N),
+ PINGROUP(uart2_rts_n_pj6, UARTA, UARTB, RSVD3, SPI4, RSVD3, 0x316c, N, N, N),
+ PINGROUP(uart2_cts_n_pj5, UARTA, UARTB, RSVD3, SPI4, RSVD3, 0x3170, N, N, N),
+ PINGROUP(uart3_txd_pw6, UARTC, RSVD2, RSVD3, SPI4, RSVD3, 0x3174, N, N, N),
+ PINGROUP(uart3_rxd_pw7, UARTC, RSVD2, RSVD3, SPI4, RSVD3, 0x3178, N, N, N),
+ PINGROUP(uart3_cts_n_pa1, UARTC, SDMMC1, DTV, SPI4, UARTC, 0x317c, N, N, N),
+ PINGROUP(uart3_rts_n_pc0, UARTC, PWM0, DTV, DISPLAYA, UARTC, 0x3180, N, N, N),
+ PINGROUP(pu0, OWR, UARTA, RSVD3, RSVD4, RSVD4, 0x3184, N, N, N),
+ PINGROUP(pu1, RSVD1, UARTA, RSVD3, RSVD4, RSVD4, 0x3188, N, N, N),
+ PINGROUP(pu2, RSVD1, UARTA, RSVD3, RSVD4, RSVD4, 0x318c, N, N, N),
+ PINGROUP(pu3, PWM0, UARTA, DISPLAYA, DISPLAYB, PWM0, 0x3190, N, N, N),
+ PINGROUP(pu4, PWM1, UARTA, DISPLAYA, DISPLAYB, PWM1, 0x3194, N, N, N),
+ PINGROUP(pu5, PWM2, UARTA, DISPLAYA, DISPLAYB, PWM2, 0x3198, N, N, N),
+ PINGROUP(pu6, PWM3, UARTA, USB, DISPLAYB, PWM3, 0x319c, N, N, N),
+ PINGROUP(gen1_i2c_sda_pc5, I2C1, RSVD2, RSVD3, RSVD4, RSVD4, 0x31a0, Y, N, N),
+ PINGROUP(gen1_i2c_scl_pc4, I2C1, RSVD2, RSVD3, RSVD4, RSVD4, 0x31a4, Y, N, N),
+ PINGROUP(dap4_fs_pp4, I2S3, RSVD2, DTV, RSVD4, RSVD4, 0x31a8, N, N, N),
+ PINGROUP(dap4_din_pp5, I2S3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31ac, N, N, N),
+ PINGROUP(dap4_dout_pp6, I2S3, RSVD2, DTV, RSVD4, RSVD4, 0x31b0, N, N, N),
+ PINGROUP(dap4_sclk_pp7, I2S3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31b4, N, N, N),
+ PINGROUP(clk3_out_pee0, EXTPERIPH3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31b8, N, N, N),
+ PINGROUP(clk3_req_pee1, DEV3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31bc, N, N, N),
+ PINGROUP(gmi_wp_n_pc7, RSVD1, NAND, GMI, GMI_ALT, RSVD1, 0x31c0, N, N, N),
+ PINGROUP(gmi_iordy_pi5, SDMMC2, RSVD2, GMI, TRACE, RSVD2, 0x31c4, N, N, N),
+ PINGROUP(gmi_wait_pi7, SPI4, NAND, GMI, DTV, NAND, 0x31c8, N, N, N),
+ PINGROUP(gmi_adv_n_pk0, RSVD1, NAND, GMI, TRACE, RSVD1, 0x31cc, N, N, N),
+ PINGROUP(gmi_clk_pk1, SDMMC2, NAND, GMI, TRACE, GMI, 0x31d0, N, N, N),
+ PINGROUP(gmi_cs0_n_pj0, RSVD1, NAND, GMI, USB, RSVD1, 0x31d4, N, N, N),
+ PINGROUP(gmi_cs1_n_pj2, RSVD1, NAND, GMI, SOC, RSVD1, 0x31d8, N, N, N),
+ PINGROUP(gmi_cs2_n_pk3, SDMMC2, NAND, GMI, TRACE, GMI, 0x31dc, N, N, N),
+ PINGROUP(gmi_cs3_n_pk4, SDMMC2, NAND, GMI, GMI_ALT, GMI, 0x31e0, N, N, N),
+ PINGROUP(gmi_cs4_n_pk2, USB, NAND, GMI, TRACE, GMI, 0x31e4, N, N, N),
+ PINGROUP(gmi_cs6_n_pi3, NAND, NAND_ALT, GMI, SPI4, NAND, 0x31e8, N, N, N),
+ PINGROUP(gmi_cs7_n_pi6, NAND, NAND_ALT, GMI, SDMMC2, NAND, 0x31ec, N, N, N),
+ PINGROUP(gmi_ad0_pg0, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f0, N, N, N),
+ PINGROUP(gmi_ad1_pg1, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f4, N, N, N),
+ PINGROUP(gmi_ad2_pg2, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f8, N, N, N),
+ PINGROUP(gmi_ad3_pg3, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31fc, N, N, N),
+ PINGROUP(gmi_ad4_pg4, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x3200, N, N, N),
+ PINGROUP(gmi_ad5_pg5, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3204, N, N, N),
+ PINGROUP(gmi_ad6_pg6, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3208, N, N, N),
+ PINGROUP(gmi_ad7_pg7, RSVD1, NAND, GMI, SPI4, RSVD1, 0x320c, N, N, N),
+ PINGROUP(gmi_ad8_ph0, PWM0, NAND, GMI, DTV, GMI, 0x3210, N, N, N),
+ PINGROUP(gmi_ad9_ph1, PWM1, NAND, GMI, CLDVFS, GMI, 0x3214, N, N, N),
+ PINGROUP(gmi_ad10_ph2, PWM2, NAND, GMI, CLDVFS, GMI, 0x3218, N, N, N),
+ PINGROUP(gmi_ad11_ph3, PWM3, NAND, GMI, USB, GMI, 0x321c, N, N, N),
+ PINGROUP(gmi_ad12_ph4, SDMMC2, NAND, GMI, RSVD4, RSVD4, 0x3220, N, N, N),
+ PINGROUP(gmi_ad13_ph5, SDMMC2, NAND, GMI, RSVD4, RSVD4, 0x3224, N, N, N),
+ PINGROUP(gmi_ad14_ph6, SDMMC2, NAND, GMI, DTV, GMI, 0x3228, N, N, N),
+ PINGROUP(gmi_ad15_ph7, SDMMC2, NAND, GMI, DTV, GMI, 0x322c, N, N, N),
+ PINGROUP(gmi_a16_pj7, UARTD, TRACE, GMI, GMI_ALT, GMI, 0x3230, N, N, N),
+ PINGROUP(gmi_a17_pb0, UARTD, RSVD2, GMI, TRACE, RSVD2, 0x3234, N, N, N),
+ PINGROUP(gmi_a18_pb1, UARTD, RSVD2, GMI, TRACE, RSVD2, 0x3238, N, N, N),
+ PINGROUP(gmi_a19_pk7, UARTD, SPI4, GMI, TRACE, GMI, 0x323c, N, N, N),
+ PINGROUP(gmi_wr_n_pi0, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3240, N, N, N),
+ PINGROUP(gmi_oe_n_pi1, RSVD1, NAND, GMI, SOC, RSVD1, 0x3244, N, N, N),
+ PINGROUP(gmi_dqs_p_pj3, SDMMC2, NAND, GMI, TRACE, NAND, 0x3248, N, N, N),
+ PINGROUP(gmi_rst_n_pi4, NAND, NAND_ALT, GMI, RSVD4, RSVD4, 0x324c, N, N, N),
+ PINGROUP(gen2_i2c_scl_pt5, I2C2, RSVD2, GMI, RSVD4, RSVD4, 0x3250, Y, N, N),
+ PINGROUP(gen2_i2c_sda_pt6, I2C2, RSVD2, GMI, RSVD4, RSVD4, 0x3254, Y, N, N),
+ PINGROUP(sdmmc4_clk_pcc4, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x3258, N, Y, N),
+ PINGROUP(sdmmc4_cmd_pt7, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x325c, N, Y, N),
+ PINGROUP(sdmmc4_dat0_paa0, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3260, N, Y, N),
+ PINGROUP(sdmmc4_dat1_paa1, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3264, N, Y, N),
+ PINGROUP(sdmmc4_dat2_paa2, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3268, N, Y, N),
+ PINGROUP(sdmmc4_dat3_paa3, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x326c, N, Y, N),
+ PINGROUP(sdmmc4_dat4_paa4, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3270, N, Y, N),
+ PINGROUP(sdmmc4_dat5_paa5, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3274, N, Y, N),
+ PINGROUP(sdmmc4_dat6_paa6, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3278, N, Y, N),
+ PINGROUP(sdmmc4_dat7_paa7, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x327c, N, Y, N),
+ PINGROUP(cam_mclk_pcc0, VI, VI_ALT1, VI_ALT3, RSVD4, RSVD4, 0x3284, N, N, N),
+ PINGROUP(pcc1, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3288, N, N, N),
+ PINGROUP(pbb0, I2S4, VI, VI_ALT1, VI_ALT3, I2S4, 0x328c, N, N, N),
+ PINGROUP(cam_i2c_scl_pbb1, VGP1, I2C3, RSVD3, RSVD4, RSVD4, 0x3290, Y, N, N),
+ PINGROUP(cam_i2c_sda_pbb2, VGP2, I2C3, RSVD3, RSVD4, RSVD4, 0x3294, Y, N, N),
+ PINGROUP(pbb3, VGP3, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x3298, N, N, N),
+ PINGROUP(pbb4, VGP4, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x329c, N, N, N),
+ PINGROUP(pbb5, VGP5, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x32a0, N, N, N),
+ PINGROUP(pbb6, VGP6, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x32a4, N, N, N),
+ PINGROUP(pbb7, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x32a8, N, N, N),
+ PINGROUP(pcc2, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x32ac, N, N, N),
+ PINGROUP(pwr_i2c_scl_pz6, I2CPWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x32b4, Y, N, N),
+ PINGROUP(pwr_i2c_sda_pz7, I2CPWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x32b8, Y, N, N),
+ PINGROUP(kb_row0_pr0, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32bc, N, N, N),
+ PINGROUP(kb_row1_pr1, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32c0, N, N, N),
+ PINGROUP(kb_row2_pr2, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32c4, N, N, N),
+ PINGROUP(kb_row3_pr3, KBC, DISPLAYA, RSVD3, DISPLAYB, RSVD3, 0x32c8, N, N, N),
+ PINGROUP(kb_row4_pr4, KBC, DISPLAYA, SPI2, DISPLAYB, KBC, 0x32cc, N, N, N),
+ PINGROUP(kb_row5_pr5, KBC, DISPLAYA, SPI2, DISPLAYB, KBC, 0x32d0, N, N, N),
+ PINGROUP(kb_row6_pr6, KBC, DISPLAYA, DISPLAYA_ALT, DISPLAYB, KBC, 0x32d4, N, N, N),
+ PINGROUP(kb_row7_pr7, KBC, RSVD2, CLDVFS, UARTA, RSVD2, 0x32d8, N, N, N),
+ PINGROUP(kb_row8_ps0, KBC, RSVD2, CLDVFS, UARTA, RSVD2, 0x32dc, N, N, N),
+ PINGROUP(kb_row9_ps1, KBC, RSVD2, RSVD3, UARTA, RSVD3, 0x32e0, N, N, N),
+ PINGROUP(kb_row10_ps2, KBC, RSVD2, RSVD3, UARTA, RSVD3, 0x32e4, N, N, N),
+ PINGROUP(kb_col0_pq0, KBC, USB, SPI2, EMC_DLL, KBC, 0x32fc, N, N, N),
+ PINGROUP(kb_col1_pq1, KBC, RSVD2, SPI2, EMC_DLL, RSVD2, 0x3300, N, N, N),
+ PINGROUP(kb_col2_pq2, KBC, RSVD2, SPI2, RSVD4, RSVD2, 0x3304, N, N, N),
+ PINGROUP(kb_col3_pq3, KBC, DISPLAYA, PWM2, UARTA, KBC, 0x3308, N, N, N),
+ PINGROUP(kb_col4_pq4, KBC, OWR, SDMMC3, UARTA, KBC, 0x330c, N, N, N),
+ PINGROUP(kb_col5_pq5, KBC, RSVD2, SDMMC1, RSVD4, RSVD4, 0x3310, N, N, N),
+ PINGROUP(kb_col6_pq6, KBC, RSVD2, SPI2, RSVD4, RSVD4, 0x3314, N, N, N),
+ PINGROUP(kb_col7_pq7, KBC, RSVD2, SPI2, RSVD4, RSVD4, 0x3318, N, N, N),
+ PINGROUP(clk_32k_out_pa0, BLINK, SOC, RSVD3, RSVD4, RSVD4, 0x331c, N, N, N),
+ PINGROUP(sys_clk_req_pz5, SYSCLK, RSVD2, RSVD3, RSVD4, RSVD4, 0x3320, N, N, N),
+ PINGROUP(core_pwr_req, PWRON, RSVD2, RSVD3, RSVD4, RSVD4, 0x3324, N, N, N),
+ PINGROUP(cpu_pwr_req, CPU, RSVD2, RSVD3, RSVD4, RSVD4, 0x3328, N, N, N),
+ PINGROUP(pwr_int_n, PMI, RSVD2, RSVD3, RSVD4, RSVD4, 0x332c, N, N, N),
+ PINGROUP(owr, OWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x3334, N, N, Y),
+ PINGROUP(dap1_fs_pn0, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3338, N, N, N),
+ PINGROUP(dap1_din_pn1, I2S0, HDA, GMI, RSVD4, RSVD4, 0x333c, N, N, N),
+ PINGROUP(dap1_dout_pn2, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3340, N, N, N),
+ PINGROUP(dap1_sclk_pn3, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3344, N, N, N),
+ PINGROUP(clk1_req_pee2, DAP, DAP1, RSVD3, RSVD4, RSVD4, 0x3348, N, N, N),
+ PINGROUP(clk1_out_pw4, EXTPERIPH1, DAP2, RSVD3, RSVD4, RSVD4, 0x334c, N, N, N),
+ PINGROUP(spdif_in_pk6, SPDIF, USB, RSVD3, RSVD4, RSVD4, 0x3350, N, N, N),
+ PINGROUP(spdif_out_pk5, SPDIF, RSVD2, RSVD3, RSVD4, RSVD4, 0x3354, N, N, N),
+ PINGROUP(dap2_fs_pa2, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3358, N, N, N),
+ PINGROUP(dap2_din_pa4, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x335c, N, N, N),
+ PINGROUP(dap2_dout_pa5, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3360, N, N, N),
+ PINGROUP(dap2_sclk_pa3, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3364, N, N, N),
+ PINGROUP(dvfs_pwm_px0, SPI6, CLDVFS, RSVD3, RSVD4, RSVD4, 0x3368, N, N, N),
+ PINGROUP(gpio_x1_aud_px1, SPI6, RSVD2, RSVD3, RSVD4, RSVD4, 0x336c, N, N, N),
+ PINGROUP(gpio_x3_aud_px3, SPI6, SPI1, RSVD3, RSVD4, RSVD4, 0x3370, N, N, N),
+ PINGROUP(dvfs_clk_px2, SPI6, CLDVFS, RSVD3, RSVD4, RSVD4, 0x3374, N, N, N),
+ PINGROUP(gpio_x4_aud_px4, RSVD1, SPI1, SPI2, DAP2, RSVD1, 0x3378, N, N, N),
+ PINGROUP(gpio_x5_aud_px5, RSVD1, SPI1, SPI2, RSVD4, RSVD1, 0x337c, N, N, N),
+ PINGROUP(gpio_x6_aud_px6, SPI6, SPI1, SPI2, RSVD4, RSVD4, 0x3380, N, N, N),
+ PINGROUP(gpio_x7_aud_px7, RSVD1, SPI1, SPI2, RSVD4, RSVD4, 0x3384, N, N, N),
+ PINGROUP(sdmmc3_clk_pa6, SDMMC3, RSVD2, RSVD3, SPI3, RSVD3, 0x3390, N, N, N),
+ PINGROUP(sdmmc3_cmd_pa7, SDMMC3, PWM3, UARTA, SPI3, SDMMC3, 0x3394, N, N, N),
+ PINGROUP(sdmmc3_dat0_pb7, SDMMC3, RSVD2, RSVD3, SPI3, RSVD3, 0x3398, N, N, N),
+ PINGROUP(sdmmc3_dat1_pb6, SDMMC3, PWM2, UARTA, SPI3, SDMMC3, 0x339c, N, N, N),
+ PINGROUP(sdmmc3_dat2_pb5, SDMMC3, PWM1, DISPLAYA, SPI3, SDMMC3, 0x33a0, N, N, N),
+ PINGROUP(sdmmc3_dat3_pb4, SDMMC3, PWM0, DISPLAYB, SPI3, SDMMC3, 0x33a4, N, N, N),
+ PINGROUP(hdmi_cec_pee3, CEC, SDMMC3, RSVD3, SOC, RSVD3, 0x33e0, Y, N, N),
+ PINGROUP(sdmmc1_wp_n_pv3, SDMMC1, CLK12, SPI4, UARTA, SDMMC1, 0x33e4, N, N, N),
+ PINGROUP(sdmmc3_cd_n_pv2, SDMMC3, OWR, RSVD3, RSVD4, RSVD4, 0x33e8, N, N, N),
+ PINGROUP(gpio_w2_aud_pw2, SPI6, RSVD2, SPI2, I2C1, RSVD2, 0x33ec, N, N, N),
+ PINGROUP(gpio_w3_aud_pw3, SPI6, SPI1, SPI2, I2C1, SPI6, 0x33f0, N, N, N),
+ PINGROUP(usb_vbus_en0_pn4, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x33f4, Y, N, N),
+ PINGROUP(usb_vbus_en1_pn5, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x33f8, Y, N, N),
+ PINGROUP(sdmmc3_clk_lb_in_pee5, SDMMC3, RSVD2, RSVD3, RSVD4, RSVD4, 0x33fc, N, N, N),
+ PINGROUP(sdmmc3_clk_lb_out_pee4, SDMMC3, RSVD2, RSVD3, RSVD4, RSVD4, 0x3400, N, N, N),
+ PINGROUP(reset_out_n, RSVD1, RSVD2, RSVD3, RESET_OUT_N, RSVD3, 0x3408, N, N, N),
+
+ /* pg_name, r, hsm_b, schmitt_b, lpmd_b, drvdn_b, drvdn_w, drvup_b, drvup_w, slwr_b, slwr_w, slwf_b, slwf_w, drvtype */
+ DRV_PINGROUP(ao1, 0x868, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(ao2, 0x86c, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(at1, 0x870, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y),
+ DRV_PINGROUP(at2, 0x874, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y),
+ DRV_PINGROUP(at3, 0x878, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y),
+ DRV_PINGROUP(at4, 0x87c, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y),
+ DRV_PINGROUP(at5, 0x880, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(cdev1, 0x884, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(cdev2, 0x888, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(dap1, 0x890, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(dap2, 0x894, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(dap3, 0x898, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(dap4, 0x89c, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(dbg, 0x8a0, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(sdio3, 0x8b0, 2, 3, -1, 12, 7, 20, 7, 28, 2, 30, 2, N),
+ DRV_PINGROUP(spi, 0x8b4, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(uaa, 0x8b8, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(uab, 0x8bc, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(uart2, 0x8c0, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(uart3, 0x8c4, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(sdio1, 0x8ec, 2, 3, -1, 12, 7, 20, 7, 28, 2, 30, 2, N),
+ DRV_PINGROUP(ddc, 0x8fc, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(gma, 0x900, 2, 3, 4, 14, 5, 20, 5, 28, 2, 30, 2, Y),
+ DRV_PINGROUP(gme, 0x910, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(gmf, 0x914, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(gmg, 0x918, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(gmh, 0x91c, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(owr, 0x920, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+ DRV_PINGROUP(uda, 0x924, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N),
+};
+
+static const struct tegra_pinctrl_soc_data tegra114_pinctrl = {
+ .ngpios = NUM_GPIOS,
+ .pins = tegra114_pins,
+ .npins = ARRAY_SIZE(tegra114_pins),
+ .functions = tegra114_functions,
+ .nfunctions = ARRAY_SIZE(tegra114_functions),
+ .groups = tegra114_groups,
+ .ngroups = ARRAY_SIZE(tegra114_groups),
+};
+
+static int tegra114_pinctrl_probe(struct platform_device *pdev)
+{
+ return tegra_pinctrl_probe(pdev, &tegra114_pinctrl);
+}
+
+static struct of_device_id tegra114_pinctrl_of_match[] = {
+ { .compatible = "nvidia,tegra114-pinmux", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra114_pinctrl_of_match);
+
+static struct platform_driver tegra114_pinctrl_driver = {
+ .driver = {
+ .name = "tegra114-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra114_pinctrl_of_match,
+ },
+ .probe = tegra114_pinctrl_probe,
+ .remove = tegra_pinctrl_remove,
+};
+module_platform_driver(tegra114_pinctrl_driver);
+
+MODULE_ALIAS("platform:tegra114-pinctrl");
+MODULE_AUTHOR("Pritesh Raithatha <praithatha@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra114 pincontrol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-tegra20.c b/drivers/pinctrl/pinctrl-tegra20.c
index e848189..fcfb7d0 100644
--- a/drivers/pinctrl/pinctrl-tegra20.c
+++ b/drivers/pinctrl/pinctrl-tegra20.c
@@ -2624,7 +2624,9 @@
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
+ .rcv_sel_reg = -1, \
.drv_reg = -1, \
+ .drvtype_reg = -1, \
}
/* Pin groups with only pull up and pull down control */
@@ -2642,7 +2644,9 @@
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
+ .rcv_sel_reg = -1, \
.drv_reg = -1, \
+ .drvtype_reg = -1, \
}
/* Pin groups for drive strength registers (configurable version) */
@@ -2660,6 +2664,7 @@
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
+ .rcv_sel_reg = -1, \
.drv_reg = ((r) - PINGROUP_REG_A), \
.drv_bank = 3, \
.hsm_bit = hsm_b, \
@@ -2673,6 +2678,7 @@
.slwr_width = slwr_w, \
.slwf_bit = slwf_b, \
.slwf_width = slwf_w, \
+ .drvtype_reg = -1, \
}
/* Pin groups for drive strength registers (simple version) */
diff --git a/drivers/pinctrl/pinctrl-tegra30.c b/drivers/pinctrl/pinctrl-tegra30.c
index 9ad87ea..2300deb 100644
--- a/drivers/pinctrl/pinctrl-tegra30.c
+++ b/drivers/pinctrl/pinctrl-tegra30.c
@@ -3384,7 +3384,9 @@
.ioreset_reg = PINGROUP_REG_##ior(r), \
.ioreset_bank = 1, \
.ioreset_bit = 8, \
+ .rcv_sel_reg = -1, \
.drv_reg = -1, \
+ .drvtype_reg = -1, \
}
#define DRV_PINGROUP(pg_name, r, hsm_b, schmitt_b, lpmd_b, \
@@ -3401,6 +3403,7 @@
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
+ .rcv_sel_reg = -1, \
.drv_reg = ((r) - DRV_PINGROUP_REG_A), \
.drv_bank = 0, \
.hsm_bit = hsm_b, \
@@ -3414,6 +3417,7 @@
.slwr_width = slwr_w, \
.slwf_bit = slwf_b, \
.slwf_width = slwf_w, \
+ .drvtype_reg = -1, \
}
static const struct tegra_pingroup tegra30_groups[] = {
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index 5f0eb04..53cb6a3 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -441,17 +441,17 @@
if (port == PORT3)
reg = GPIO3_OD;
else
- reg = GPIO_OD(port);
+ reg = GPIO_OD(pin);
*config = LTQ_PINCONF_PACK(param,
- !!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
+ !gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
- reg = GPIO_PUDEN(port);
- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
+ reg = GPIO_PUDEN(pin);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
*config = LTQ_PINCONF_PACK(param, 0);
break;
}
@@ -459,13 +459,18 @@
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
- reg = GPIO_PUDSEL(port);
- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
+ reg = GPIO_PUDSEL(pin);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
*config = LTQ_PINCONF_PACK(param, 2);
else
*config = LTQ_PINCONF_PACK(param, 1);
break;
+ case LTQ_PINCONF_PARAM_OUTPUT:
+ reg = GPIO_DIR(pin);
+ *config = LTQ_PINCONF_PACK(param,
+ gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
+ break;
default:
dev_err(pctldev->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
@@ -488,33 +493,44 @@
if (port == PORT3)
reg = GPIO3_OD;
else
- reg = GPIO_OD(port);
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ reg = GPIO_OD(pin);
+ if (arg == 0)
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
+ else
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
- reg = GPIO_PUDEN(port);
+ reg = GPIO_PUDEN(pin);
if (arg == 0) {
- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
break;
}
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
- reg = GPIO_PUDSEL(port);
+ reg = GPIO_PUDSEL(pin);
if (arg == 1)
- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
else if (arg == 2)
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
else
dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
break;
+ case LTQ_PINCONF_PARAM_OUTPUT:
+ reg = GPIO_DIR(pin);
+ if (arg == 0)
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
+ else
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
+ break;
+
default:
dev_err(pctldev->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
@@ -522,9 +538,24 @@
return 0;
}
+int xway_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long config)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+ int i, ret = 0;
+
+ for (i = 0; i < info->grps[selector].npins && !ret; i++)
+ ret = xway_pinconf_set(pctldev,
+ info->grps[selector].pins[i], config);
+
+ return ret;
+}
+
static struct pinconf_ops xway_pinconf_ops = {
.pin_config_get = xway_pinconf_get,
.pin_config_set = xway_pinconf_set,
+ .pin_config_group_set = xway_pinconf_group_set,
};
static struct pinctrl_desc xway_pctrl_desc = {
@@ -558,6 +589,7 @@
static const struct ltq_cfg_param xway_cfg_params[] = {
{"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
{"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
+ {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT},
};
static struct ltq_pinmux_info xway_info = {
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index fcde4e5..d9f9a0d 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -1910,7 +1910,7 @@
return result;
}
-static int asus_acpi_remove(struct acpi_device *device, int type)
+static int asus_acpi_remove(struct acpi_device *device)
{
struct asus_laptop *asus = acpi_driver_data(device);
diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c
index c87ff16..36e5e6c 100644
--- a/drivers/platform/x86/classmate-laptop.c
+++ b/drivers/platform/x86/classmate-laptop.c
@@ -432,7 +432,7 @@
return error;
}
-static int cmpc_accel_remove_v4(struct acpi_device *acpi, int type)
+static int cmpc_accel_remove_v4(struct acpi_device *acpi)
{
struct input_dev *inputdev;
struct cmpc_accel *accel;
@@ -668,7 +668,7 @@
return error;
}
-static int cmpc_accel_remove(struct acpi_device *acpi, int type)
+static int cmpc_accel_remove(struct acpi_device *acpi)
{
struct input_dev *inputdev;
struct cmpc_accel *accel;
@@ -753,7 +753,7 @@
cmpc_tablet_idev_init);
}
-static int cmpc_tablet_remove(struct acpi_device *acpi, int type)
+static int cmpc_tablet_remove(struct acpi_device *acpi)
{
return cmpc_remove_acpi_notify_device(acpi);
}
@@ -1000,7 +1000,7 @@
return retval;
}
-static int cmpc_ipml_remove(struct acpi_device *acpi, int type)
+static int cmpc_ipml_remove(struct acpi_device *acpi)
{
struct ipml200_dev *ipml;
@@ -1079,7 +1079,7 @@
cmpc_keys_idev_init);
}
-static int cmpc_keys_remove(struct acpi_device *acpi, int type)
+static int cmpc_keys_remove(struct acpi_device *acpi)
{
return cmpc_remove_acpi_notify_device(acpi);
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 528e949..5d26e70 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -1007,7 +1007,7 @@
static void eeepc_set_fan_pwm(int value)
{
- value = SENSORS_LIMIT(value, 0, 255);
+ value = clamp_val(value, 0, 255);
value = value * 100 / 255;
ec_write(EEEPC_EC_FAN_PWM, value);
}
@@ -1501,7 +1501,7 @@
return result;
}
-static int eeepc_acpi_remove(struct acpi_device *device, int type)
+static int eeepc_acpi_remove(struct acpi_device *device)
{
struct eeepc_laptop *eeepc = acpi_driver_data(device);
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index c4c1a54..1c9386e 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -733,7 +733,7 @@
return result;
}
-static int acpi_fujitsu_remove(struct acpi_device *device, int type)
+static int acpi_fujitsu_remove(struct acpi_device *device)
{
struct fujitsu_t *fujitsu = acpi_driver_data(device);
struct input_dev *input = fujitsu->input;
@@ -938,7 +938,7 @@
return result;
}
-static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
+static int acpi_fujitsu_hotkey_remove(struct acpi_device *device)
{
struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
struct input_dev *input = fujitsu_hotkey->input;
diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c
index 174ca01..570926c 100644
--- a/drivers/platform/x86/fujitsu-tablet.c
+++ b/drivers/platform/x86/fujitsu-tablet.c
@@ -431,7 +431,7 @@
return 0;
}
-static int acpi_fujitsu_remove(struct acpi_device *adev, int type)
+static int acpi_fujitsu_remove(struct acpi_device *adev)
{
free_irq(fujitsu.irq, fujitsu_interrupt);
release_region(fujitsu.io_base, fujitsu.io_length);
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 18d74f2..e64a7a8 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -337,7 +337,7 @@
return ret;
}
-static int lis3lv02d_remove(struct acpi_device *device, int type)
+static int lis3lv02d_remove(struct acpi_device *device)
{
if (!device)
return -EINVAL;
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 64bfb30..17f00b8 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -834,7 +834,7 @@
return ret;
}
-static int ideapad_acpi_remove(struct acpi_device *adevice, int type)
+static int ideapad_acpi_remove(struct acpi_device *adevice)
{
struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
int i;
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index 3271ac8..d6cfc15 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -200,7 +200,7 @@
}
-static int intel_menlow_memory_remove(struct acpi_device *device, int type)
+static int intel_menlow_memory_remove(struct acpi_device *device)
{
struct thermal_cooling_device *cdev = acpi_driver_data(device);
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 8e8caa7..4add9a3 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -176,7 +176,7 @@
/* R1 handles SINF_AC_CUR_BRIGHT as SINF_CUR_BRIGHT, doesn't know AC state */
static int acpi_pcc_hotkey_add(struct acpi_device *device);
-static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type);
+static int acpi_pcc_hotkey_remove(struct acpi_device *device);
static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id pcc_device_ids[] = {
@@ -663,7 +663,7 @@
return 0;
}
-static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type)
+static int acpi_pcc_hotkey_remove(struct acpi_device *device)
{
struct pcc_acpi *pcc = acpi_driver_data(device);
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index b8ad71f..ceb41ef 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -2740,7 +2740,7 @@
return result;
}
-static int sony_nc_remove(struct acpi_device *device, int type)
+static int sony_nc_remove(struct acpi_device *device)
{
struct sony_nc_value *item;
@@ -4111,7 +4111,7 @@
* ACPI driver
*
*****************/
-static int sony_pic_remove(struct acpi_device *device, int type)
+static int sony_pic_remove(struct acpi_device *device)
{
struct sony_pic_ioport *io, *tmp_io;
struct sony_pic_irq *irq, *tmp_irq;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index f946ca7..ebcb461 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4877,8 +4877,7 @@
static void light_exit(void)
{
led_classdev_unregister(&tpacpi_led_thinklight.led_classdev);
- if (work_pending(&tpacpi_led_thinklight.work))
- flush_workqueue(tpacpi_wq);
+ flush_workqueue(tpacpi_wq);
}
static int light_read(struct seq_file *m)
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index d727bfe..4ab618c 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -157,7 +157,7 @@
return -ENODEV;
}
-static int acpi_topstar_remove(struct acpi_device *device, int type)
+static int acpi_topstar_remove(struct acpi_device *device)
{
struct topstar_hkey *tps_hkey = acpi_driver_data(device);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index c272789..904476b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -1118,7 +1118,7 @@
return 0;
}
-static int toshiba_acpi_remove(struct acpi_device *acpi_dev, int type)
+static int toshiba_acpi_remove(struct acpi_device *acpi_dev)
{
struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
@@ -1250,7 +1250,7 @@
return 0;
error:
- toshiba_acpi_remove(acpi_dev, 0);
+ toshiba_acpi_remove(acpi_dev);
return ret;
}
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index e95be0b..74dd01a 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -32,7 +32,7 @@
static int toshiba_bt_rfkill_add(struct acpi_device *device);
-static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type);
+static int toshiba_bt_rfkill_remove(struct acpi_device *device);
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id bt_device_ids[] = {
@@ -122,7 +122,7 @@
return result;
}
-static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type)
+static int toshiba_bt_rfkill_remove(struct acpi_device *device)
{
/* clean up */
return 0;
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 42a4dcc..e4ac38a 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -92,7 +92,7 @@
MODULE_PARM_DESC(debug_dump_wdg,
"Dump available WMI interfaces [0/1]");
-static int acpi_wmi_remove(struct acpi_device *device, int type);
+static int acpi_wmi_remove(struct acpi_device *device);
static int acpi_wmi_add(struct acpi_device *device);
static void acpi_wmi_notify(struct acpi_device *device, u32 event);
@@ -917,7 +917,7 @@
}
}
-static int acpi_wmi_remove(struct acpi_device *device, int type)
+static int acpi_wmi_remove(struct acpi_device *device)
{
acpi_remove_address_space_handler(device->handle,
ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler);
diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c
index 16d340c..4b1377b 100644
--- a/drivers/platform/x86/xo15-ebook.c
+++ b/drivers/platform/x86/xo15-ebook.c
@@ -150,7 +150,7 @@
return error;
}
-static int ebook_switch_remove(struct acpi_device *device, int type)
+static int ebook_switch_remove(struct acpi_device *device)
{
struct ebook_switch *button = acpi_driver_data(device);
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 72e822e..8813fc0 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -90,7 +90,7 @@
pnp_dbg(&dev->dev, "set resources\n");
handle = DEVICE_ACPI_HANDLE(&dev->dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) {
+ if (!handle || acpi_bus_get_device(handle, &acpi_dev)) {
dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__);
return -ENODEV;
}
@@ -123,7 +123,7 @@
dev_dbg(&dev->dev, "disable resources\n");
handle = DEVICE_ACPI_HANDLE(&dev->dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) {
+ if (!handle || acpi_bus_get_device(handle, &acpi_dev)) {
dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__);
return 0;
}
@@ -145,7 +145,7 @@
acpi_handle handle;
handle = DEVICE_ACPI_HANDLE(&dev->dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) {
+ if (!handle || acpi_bus_get_device(handle, &acpi_dev)) {
dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__);
return false;
}
@@ -160,7 +160,7 @@
int error = 0;
handle = DEVICE_ACPI_HANDLE(&dev->dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) {
+ if (!handle || acpi_bus_get_device(handle, &acpi_dev)) {
dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__);
return 0;
}
@@ -197,7 +197,7 @@
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
int error = 0;
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) {
+ if (!handle || acpi_bus_get_device(handle, &acpi_dev)) {
dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__);
return -ENODEV;
}
diff --git a/drivers/pnp/pnpbios/Kconfig b/drivers/pnp/pnpbios/Kconfig
index b986d9f..50c3dd0 100644
--- a/drivers/pnp/pnpbios/Kconfig
+++ b/drivers/pnp/pnpbios/Kconfig
@@ -2,8 +2,8 @@
# Plug and Play BIOS configuration
#
config PNPBIOS
- bool "Plug and Play BIOS support (EXPERIMENTAL)"
- depends on ISA && X86 && EXPERIMENTAL
+ bool "Plug and Play BIOS support"
+ depends on ISA && X86
default n
---help---
Linux uses the PNPBIOS as defined in "Plug and Play BIOS
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
index 8bc80b0..d338c1c 100644
--- a/drivers/power/88pm860x_battery.c
+++ b/drivers/power/88pm860x_battery.c
@@ -915,15 +915,13 @@
info->irq_cc = platform_get_irq(pdev, 0);
if (info->irq_cc <= 0) {
dev_err(&pdev->dev, "No IRQ resource!\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
info->irq_batt = platform_get_irq(pdev, 1);
if (info->irq_batt <= 0) {
dev_err(&pdev->dev, "No IRQ resource!\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
info->chip = chip;
@@ -957,7 +955,7 @@
ret = power_supply_register(&pdev->dev, &info->battery);
if (ret)
- goto out;
+ return ret;
info->battery.dev->parent = &pdev->dev;
ret = request_threaded_irq(info->irq_cc, NULL,
@@ -984,8 +982,6 @@
free_irq(info->irq_cc, info);
out_reg:
power_supply_unregister(&info->battery);
-out:
- kfree(info);
return ret;
}
@@ -993,10 +989,9 @@
{
struct pm860x_battery_info *info = platform_get_drvdata(pdev);
- power_supply_unregister(&info->battery);
free_irq(info->irq_batt, info);
free_irq(info->irq_cc, info);
- kfree(info);
+ power_supply_unregister(&info->battery);
platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9f45e2f..9e00c38 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -346,6 +346,20 @@
help
Say Y to include support for AB8500 battery management.
+config BATTERY_GOLDFISH
+ tristate "Goldfish battery driver"
+ depends on GENERIC_HARDIRQS
+ help
+ Say Y to enable support for the battery and AC power in the
+ Goldfish emulator.
+
+config CHARGER_PM2301
+ bool "PM2301 Battery Charger Driver"
+ depends on AB8500_BM
+ help
+ Say Y to include support for PM2301 charger driver.
+ Depends on AB8500 battery management core.
+
source "drivers/power/reset/Kconfig"
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 22c8913..3f66436 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
+obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
@@ -38,7 +39,7 @@
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
@@ -46,6 +47,7 @@
obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
+obj-$(CONFIG_CHARGER_PM2301) += pm2301_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index f034ae4..7a96c06 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -182,206 +182,206 @@
};
static struct abx500_battery_type bat_type_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 53407,
- .resis_low = 12500,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
- .r_to_t_tbl = temp_tbl_A_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
- .v_to_cap_tbl = cap_tbl_A_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+ .r_to_t_tbl = temp_tbl_A_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+ .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 200000,
- .resis_low = 82869,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
- .r_to_t_tbl = temp_tbl_B_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
- .v_to_cap_tbl = cap_tbl_B_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 200000,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+ .r_to_t_tbl = temp_tbl_B_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+ .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static struct abx500_battery_type bat_type_ext_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
/*
* These are the batteries that doesn't have an internal NTC resistor to measure
* its temperature. The temperature in this case is measure with a NTC placed
* near the battery but on the PCB.
*/
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 76000,
- .resis_low = 53000,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 30000,
- .resis_low = 10000,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 95000,
- .resis_low = 76001,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static const struct abx500_bm_capacity_levels cap_levels = {
@@ -405,8 +405,8 @@
.lowbat_threshold = 3100,
.battok_falling_th_sel0 = 2860,
.battok_raising_th_sel1 = 2860,
+ .maint_thres = 95,
.user_cap_limit = 15,
- .maint_thres = 97,
};
static const struct abx500_maxim_parameters maxi_params = {
@@ -424,96 +424,84 @@
};
struct abx500_bm_data ab8500_bm_data = {
- .temp_under = 3,
- .temp_low = 8,
- .temp_high = 43,
- .temp_over = 48,
- .main_safety_tmr_h = 4,
- .temp_interval_chg = 20,
- .temp_interval_nochg = 120,
- .usb_safety_tmr_h = 4,
- .bkup_bat_v = BUP_VCH_SEL_2P6V,
- .bkup_bat_i = BUP_ICH_SEL_150UA,
- .no_maintenance = false,
- .adc_therm = ABx500_ADC_THERM_BATCTRL,
- .chg_unknown_bat = false,
- .enable_overshoot = false,
- .fg_res = 100,
- .cap_levels = &cap_levels,
- .bat_type = bat_type_thermistor,
- .n_btypes = 3,
- .batt_id = 0,
- .interval_charging = 5,
- .interval_not_charging = 120,
- .temp_hysteresis = 3,
- .gnd_lift_resistance = 34,
- .maxi = &maxi_params,
- .chg_params = &chg,
- .fg_params = &fg,
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .capacity_scaling = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = 3,
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
};
-int bmdevs_of_probe(struct device *dev, struct device_node *np,
- struct abx500_bm_data **battery)
+int ab8500_bm_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data *bm)
{
- struct abx500_battery_type *btype;
- struct device_node *np_bat_supply;
- struct abx500_bm_data *bat;
+ struct batres_vs_temp *tmp_batres_tbl;
+ struct device_node *battery_node;
const char *btech;
- char bat_tech[8];
- int i, thermistor;
-
- *battery = &ab8500_bm_data;
+ int i;
/* get phandle to 'battery-info' node */
- np_bat_supply = of_parse_phandle(np, "battery", 0);
- if (!np_bat_supply) {
- dev_err(dev, "missing property battery\n");
+ battery_node = of_parse_phandle(np, "battery", 0);
+ if (!battery_node) {
+ dev_err(dev, "battery node or reference missing\n");
return -EINVAL;
}
- if (of_property_read_bool(np_bat_supply,
- "thermistor-on-batctrl"))
- thermistor = NTC_INTERNAL;
- else
- thermistor = NTC_EXTERNAL;
- bat = *battery;
- if (thermistor == NTC_EXTERNAL) {
- bat->n_btypes = 4;
- bat->bat_type = bat_type_ext_thermistor;
- bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
- }
- btech = of_get_property(np_bat_supply,
- "stericsson,battery-type", NULL);
+ btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
if (!btech) {
dev_warn(dev, "missing property battery-name/type\n");
- strcpy(bat_tech, "UNKNOWN");
- } else {
- strcpy(bat_tech, btech);
+ return -EINVAL;
}
- if (strncmp(bat_tech, "LION", 4) == 0) {
- bat->no_maintenance = true;
- bat->chg_unknown_bat = true;
- bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
- bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
- bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
- bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
- bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ if (strncmp(btech, "LION", 4) == 0) {
+ bm->no_maintenance = true;
+ bm->chg_unknown_bat = true;
+ bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95;
+ bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
}
+
+ if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+ if (strncmp(btech, "LION", 4) == 0)
+ tmp_batres_tbl = temp_to_batres_tbl_9100;
+ else
+ tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+ } else {
+ bm->n_btypes = 4;
+ bm->bat_type = bat_type_ext_thermistor;
+ bm->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
+ }
+
/* select the battery resolution table */
- for (i = 0; i < bat->n_btypes; ++i) {
- btype = (bat->bat_type + i);
- if (thermistor == NTC_EXTERNAL) {
- btype->batres_tbl =
- temp_to_batres_tbl_ext_thermistor;
- } else if (strncmp(bat_tech, "LION", 4) == 0) {
- btype->batres_tbl =
- temp_to_batres_tbl_9100;
- } else {
- btype->batres_tbl =
- temp_to_batres_tbl_thermistor;
- }
- }
- of_node_put(np_bat_supply);
+ for (i = 0; i < bm->n_btypes; ++i)
+ bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+ of_node_put(battery_node);
+
return 0;
}
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 20e2a7d..0768906 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -39,6 +39,9 @@
#define BTEMP_BATCTRL_CURR_SRC_7UA 7
#define BTEMP_BATCTRL_CURR_SRC_20UA 20
+#define BTEMP_BATCTRL_CURR_SRC_16UA 16
+#define BTEMP_BATCTRL_CURR_SRC_18UA 18
+
#define to_ab8500_btemp_device_info(x) container_of((x), \
struct ab8500_btemp, btemp_psy);
@@ -78,12 +81,13 @@
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_ranges: Battery temperature range structure
* @btemp_wq: Work queue for measuring the temperature periodically
* @btemp_periodic_work: Work for measuring the temperature periodically
+ * @initialized: True if battery id read.
*/
struct ab8500_btemp {
struct device *dev;
@@ -94,12 +98,13 @@
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
struct ab8500_btemp_ranges btemp_ranges;
struct workqueue_struct *btemp_wq;
struct delayed_work btemp_periodic_work;
+ bool initialized;
};
/* BTEMP power supply properties */
@@ -147,13 +152,13 @@
return (450000 * (v_batctrl)) / (1800 - v_batctrl);
}
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
* source to calculate the resistance, 7uA or 20uA
*/
rbs = (v_batctrl * 1000
- - di->bat->gnd_lift_resistance * inst_curr)
+ - di->bm->gnd_lift_resistance * inst_curr)
/ di->curr_source;
} else {
/*
@@ -209,11 +214,19 @@
return 0;
/* Only do this for batteries with internal NTC */
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
- if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
- curr = BAT_CTRL_7U_ENA;
- else
- curr = BAT_CTRL_20U_ENA;
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
+
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
+ curr = BAT_CTRL_16U_ENA;
+ else
+ curr = BAT_CTRL_18U_ENA;
+ } else {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+ curr = BAT_CTRL_7U_ENA;
+ else
+ curr = BAT_CTRL_20U_ENA;
+ }
dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
@@ -241,14 +254,25 @@
__func__);
goto disable_curr_source;
}
- } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
+ } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
- BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
- ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -290,11 +314,20 @@
* if we got an error above
*/
disable_curr_source:
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -372,13 +405,10 @@
return ret;
}
- /*
- * Since there is no interrupt when current measurement is done,
- * loop for over 250ms (250ms is one sample conversion time
- * with 32.768 Khz RTC clock). Note that a stop time must be set
- * since the ab8500_btemp_read_batctrl_voltage call can block and
- * take an unknown amount of time to complete.
- */
+ do {
+ msleep(20);
+ } while (!ab8500_fg_inst_curr_started(di->fg));
+
i = 0;
do {
@@ -457,9 +487,9 @@
int rbat, rntc, vntc;
u8 id;
- id = di->bat->batt_id;
+ id = di->bm->batt_id;
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
id != BATTERY_UNKNOWN) {
rbat = ab8500_btemp_get_batctrl_res(di);
@@ -474,8 +504,8 @@
}
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rbat);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rbat);
} else {
vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
if (vntc < 0) {
@@ -491,8 +521,8 @@
rntc = 230000 * vntc / (VTVOUT_V - vntc);
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rntc);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rntc);
prev = temp;
}
dev_dbg(di->dev, "Battery temperature is %d\n", temp);
@@ -511,9 +541,12 @@
{
int res;
u8 i;
+ if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ else
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->bat->batt_id = BATTERY_UNKNOWN;
+ di->bm->batt_id = BATTERY_UNKNOWN;
res = ab8500_btemp_get_batctrl_res(di);
if (res < 0) {
@@ -522,23 +555,23 @@
}
/* BATTERY_UNKNOWN is defined on position 0, skip it! */
- for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) {
- if ((res <= di->bat->bat_type[i].resis_high) &&
- (res >= di->bat->bat_type[i].resis_low)) {
+ for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) {
+ if ((res <= di->bm->bat_type[i].resis_high) &&
+ (res >= di->bm->bat_type[i].resis_low)) {
dev_dbg(di->dev, "Battery detected on %s"
" low %d < res %d < high: %d"
" index: %d\n",
- di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ?
+ di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ?
"BATCTRL" : "BATTEMP",
- di->bat->bat_type[i].resis_low, res,
- di->bat->bat_type[i].resis_high, i);
+ di->bm->bat_type[i].resis_low, res,
+ di->bm->bat_type[i].resis_high, i);
- di->bat->batt_id = i;
+ di->bm->batt_id = i;
break;
}
}
- if (di->bat->batt_id == BATTERY_UNKNOWN) {
+ if (di->bm->batt_id == BATTERY_UNKNOWN) {
dev_warn(di->dev, "Battery identified as unknown"
", resistance %d Ohm\n", res);
return -ENXIO;
@@ -548,13 +581,18 @@
* We only have to change current source if the
* detected type is Type 1, else we use the 7uA source
*/
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
- di->bat->batt_id == 1) {
- dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ di->bm->batt_id == 1) {
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ } else {
+ dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ }
}
- return di->bat->batt_id;
+ return di->bm->batt_id;
}
/**
@@ -569,6 +607,13 @@
struct ab8500_btemp *di = container_of(work,
struct ab8500_btemp, btemp_periodic_work.work);
+ if (!di->initialized) {
+ di->initialized = true;
+ /* Identify the battery */
+ if (ab8500_btemp_id(di) < 0)
+ dev_warn(di->dev, "failed to identify the battery\n");
+ }
+
di->bat_temp = ab8500_btemp_measure_temp(di);
if (di->bat_temp != di->prev_bat_temp) {
@@ -577,9 +622,9 @@
}
if (di->events.ac_conn || di->events.usb_conn)
- interval = di->bat->temp_interval_chg;
+ interval = di->bm->temp_interval_chg;
else
- interval = di->bat->temp_interval_nochg;
+ interval = di->bm->temp_interval_nochg;
/* Schedule a new measurement */
queue_delayed_work(di->btemp_wq,
@@ -616,9 +661,9 @@
{
struct ab8500_btemp *di = _di;
- if (is_ab8500_2p0_or_earlier(di->parent)) {
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
dev_dbg(di->dev, "Ignore false btemp low irq"
- " for ABB cut 1.0, 1.1 and 2.0\n");
+ " for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
} else {
dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
@@ -732,30 +777,30 @@
int temp = 0;
/*
- * The BTEMP events are not reliabe on AB8500 cut2.0
+ * The BTEMP events are not reliabe on AB8500 cut3.3
* and prior versions
*/
- if (is_ab8500_2p0_or_earlier(di->parent)) {
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
temp = di->bat_temp * 10;
} else {
if (di->events.btemp_low) {
if (temp > di->btemp_ranges.btemp_low_limit)
- temp = di->btemp_ranges.btemp_low_limit;
+ temp = di->btemp_ranges.btemp_low_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_high) {
if (temp < di->btemp_ranges.btemp_high_limit)
- temp = di->btemp_ranges.btemp_high_limit;
+ temp = di->btemp_ranges.btemp_high_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_lowmed) {
if (temp > di->btemp_ranges.btemp_med_limit)
- temp = di->btemp_ranges.btemp_med_limit;
+ temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_medhigh) {
if (temp < di->btemp_ranges.btemp_med_limit)
- temp = di->btemp_ranges.btemp_med_limit;
+ temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else
@@ -806,7 +851,7 @@
val->intval = 1;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = di->bat->bat_type[di->bat->batt_id].name;
+ val->intval = di->bm->bat_type[di->bm->batt_id].name;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = ab8500_btemp_get_temp(di);
@@ -967,6 +1012,7 @@
static int ab8500_btemp_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
@@ -976,21 +1022,19 @@
dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get parent data */
@@ -998,6 +1042,8 @@
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ di->initialized = false;
+
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
@@ -1022,10 +1068,6 @@
INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
ab8500_btemp_periodic_work);
- /* Identify the battery */
- if (ab8500_btemp_id(di) < 0)
- dev_warn(di->dev, "failed to identify the battery\n");
-
/* Set BTEMP thermal limits. Low and Med are fixed */
di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
@@ -1123,7 +1165,7 @@
platform_driver_unregister(&ab8500_btemp_driver);
}
-subsys_initcall_sync(ab8500_btemp_init);
+device_initcall(ab8500_btemp_init);
module_exit(ab8500_btemp_exit);
MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 3be9c0e..24b30b7 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -31,6 +31,7 @@
#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/usb/otg.h>
+#include <linux/mutex.h>
/* Charger constants */
#define NO_PW_CONN 0
@@ -54,6 +55,7 @@
#define MAIN_CH_INPUT_CURR_SHIFT 4
#define VBUS_IN_CURR_LIM_SHIFT 4
+#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4
#define LED_INDICATOR_PWM_ENA 0x01
#define LED_INDICATOR_PWM_DIS 0x00
@@ -68,6 +70,11 @@
#define MAIN_CH_NOK 0x01
#define VBUS_DET 0x80
+#define MAIN_CH_STATUS2_MAINCHGDROP 0x80
+#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40
+#define USB_CH_VBUSDROP 0x40
+#define USB_CH_VBUSDETDBNC 0x01
+
/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS 0x78
#define AB8500_STD_HOST_SUSP 0x18
@@ -79,6 +86,17 @@
/* Lowest charger voltage is 3.39V -> 0x4E */
#define LOW_VOLT_REG 0x4E
+/* Step up/down delay in us */
+#define STEP_UDELAY 1000
+
+#define CHARGER_STATUS_POLL 10 /* in ms */
+
+#define CHG_WD_INTERVAL (60 * HZ)
+
+#define AB8500_SW_CONTROL_FALLBACK 0x03
+/* Wait for enumeration before charing in us */
+#define WAIT_ACA_RID_ENUMERATION (5 * 1000)
+
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
USB_STAT_NOT_CONFIGURED,
@@ -97,6 +115,13 @@
USB_STAT_HM_IDGND,
USB_STAT_RESERVED,
USB_STAT_NOT_VALID_LINK,
+ USB_STAT_PHY_EN,
+ USB_STAT_SUP_NO_IDGND_VBUS,
+ USB_STAT_SUP_IDGND_VBUS,
+ USB_STAT_CHARGER_LINE_1,
+ USB_STAT_CARKIT_1,
+ USB_STAT_CARKIT_2,
+ USB_STAT_ACA_DOCK_CHARGER,
};
enum ab8500_usb_state {
@@ -149,6 +174,7 @@
int charger_voltage;
int cv_active;
bool wd_expired;
+ int charger_current;
};
struct ab8500_charger_event_flags {
@@ -159,12 +185,14 @@
bool usbchargernotok;
bool chgwdexp;
bool vbus_collapse;
+ bool vbus_drop_end;
};
struct ab8500_charger_usb_state {
- bool usb_changed;
int usb_current;
+ int usb_current_tmp;
enum ab8500_usb_state state;
+ enum ab8500_usb_state state_tmp;
spinlock_t usb_lock;
};
@@ -182,11 +210,17 @@
* charger is enabled
* @vbat Battery voltage
* @old_vbat Previously measured battery voltage
+ * @usb_device_is_unrecognised USB device is unrecognised by the hardware
* @autopower Indicate if we should have automatic pwron after pwrloss
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
+ * @invalid_charger_detect_state State when forcing AB to use invalid charger
+ * @is_usb_host: Indicate if last detected USB type is host
+ * @is_aca_rid: Incicate if accessory is ACA type
+ * @current_stepping_sessions:
+ * Counter for current stepping sessions
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
* @ac_chg: AC charger power supply
@@ -195,19 +229,28 @@
* @usb: Structure that holds the USB charger properties
* @regu: Pointer to the struct regulator
* @charger_wq: Work queue for the IRQs and checking HW state
+ * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals
+ * @pm_lock: Lock to prevent system to suspend
* @check_vbat_work Work for checking vbat threshold to adjust vbus current
* @check_hw_failure_work: Work for checking HW state
* @check_usbchgnotok_work: Work for checking USB charger not ok status
* @kick_wd_work: Work for kicking the charger watchdog in case
* of ABB rev 1.* due to the watchog logic bug
+ * @ac_charger_attached_work: Work for checking if AC charger is still
+ * connected
+ * @usb_charger_attached_work: Work for checking if USB charger is still
+ * connected
* @ac_work: Work for checking AC charger connection
* @detect_usb_type_work: Work for detecting the USB type connected
* @usb_link_status_work: Work for checking the new USB link status
* @usb_state_changed_work: Work for checking USB state
+ * @attach_work: Work for detecting USB type
+ * @vbus_drop_end_work: Work for detecting VBUS drop end
* @check_main_thermal_prot_work:
* Work for checking Main thermal status
* @check_usb_thermal_prot_work:
* Work for checking USB thermal status
+ * @charger_attached_mutex: For controlling the wakelock
*/
struct ab8500_charger {
struct device *dev;
@@ -219,11 +262,16 @@
bool vddadc_en_usb;
int vbat;
int old_vbat;
+ bool usb_device_is_unrecognised;
bool autopower;
bool autopower_cfg;
+ int invalid_charger_detect_state;
+ bool is_usb_host;
+ int is_aca_rid;
+ atomic_t current_stepping_sessions;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
struct ux500_charger ac_chg;
@@ -232,18 +280,24 @@
struct ab8500_charger_info usb;
struct regulator *regu;
struct workqueue_struct *charger_wq;
+ struct mutex usb_ipt_crnt_lock;
struct delayed_work check_vbat_work;
struct delayed_work check_hw_failure_work;
struct delayed_work check_usbchgnotok_work;
struct delayed_work kick_wd_work;
+ struct delayed_work usb_state_changed_work;
+ struct delayed_work attach_work;
+ struct delayed_work ac_charger_attached_work;
+ struct delayed_work usb_charger_attached_work;
+ struct delayed_work vbus_drop_end_work;
struct work_struct ac_work;
struct work_struct detect_usb_type_work;
struct work_struct usb_link_status_work;
- struct work_struct usb_state_changed_work;
struct work_struct check_main_thermal_prot_work;
struct work_struct check_usb_thermal_prot_work;
struct usb_phy *usb_phy;
struct notifier_block nb;
+ struct mutex charger_attached_mutex;
};
/* AC properties */
@@ -267,50 +321,65 @@
POWER_SUPPLY_PROP_CURRENT_NOW,
};
-/**
- * ab8500_power_loss_handling - set how we handle powerloss.
- * @di: pointer to the ab8500_charger structure
- *
- * Magic nummbers are from STE HW department.
+/*
+ * Function for enabling and disabling sw fallback mode
+ * should always be disabled when no charger is connected.
*/
-static void ab8500_power_loss_handling(struct ab8500_charger *di)
+static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
+ bool fallback)
{
+ u8 val;
u8 reg;
+ u8 bank;
+ u8 bit;
int ret;
- dev_dbg(di->dev, "Autopower : %d\n", di->autopower);
+ dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
- /* read the autopower register */
- ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
+ if (is_ab8500(di->parent)) {
+ bank = 0x15;
+ reg = 0x0;
+ bit = 3;
+ } else {
+ bank = AB8500_SYS_CTRL1_BLOCK;
+ reg = AB8500_SW_CONTROL_FALLBACK;
+ bit = 0;
+ }
+
+ /* read the register containing fallback bit */
+ ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%d read failed\n", __LINE__);
return;
}
- /* enable the OPT emulation registers */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+ if (is_ab8500(di->parent)) {
+ /* enable the OPT emulation registers */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ goto disable_otp;
+ }
}
- if (di->autopower)
- reg |= 0x8;
+ if (fallback)
+ val |= (1 << bit);
else
- reg &= ~0x8;
+ val &= ~(1 << bit);
- /* write back the changed value to autopower reg */
- ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+ /* write back the changed fallback bit value to register */
+ ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
if (ret) {
dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
}
- /* disable the set OTP registers again */
- ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
- if (ret) {
- dev_err(di->dev, "%d write failed\n", __LINE__);
- return;
+disable_otp:
+ if (is_ab8500(di->parent)) {
+ /* disable the set OTP registers again */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ }
}
}
@@ -329,12 +398,12 @@
!di->ac.charger_connected &&
di->autopower) {
di->autopower = false;
- ab8500_power_loss_handling(di);
+ ab8500_enable_disable_sw_fallback(di, false);
} else if (!di->autopower &&
(di->ac.charger_connected ||
di->usb.charger_connected)) {
di->autopower = true;
- ab8500_power_loss_handling(di);
+ ab8500_enable_disable_sw_fallback(di, true);
}
}
power_supply_changed(psy);
@@ -347,6 +416,19 @@
dev_dbg(di->dev, "USB connected:%i\n", connected);
di->usb.charger_connected = connected;
sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
+
+ if (connected) {
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ } else {
+ cancel_delayed_work_sync(&di->usb_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ }
}
}
@@ -500,6 +582,7 @@
/**
* ab8500_charger_detect_chargers() - Detect the connected chargers
* @di: pointer to the ab8500_charger structure
+ * @probe: if probe, don't delay and wait for HW
*
* Returns the type of charger connected.
* For USB it will not mean we can actually charge from it
@@ -513,7 +596,7 @@
* USB_PW_CONN if the USB power supply is connected
* AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
*/
-static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
{
int result = NO_PW_CONN;
int ret;
@@ -531,13 +614,25 @@
result = AC_PW_CONN;
/* Check for USB charger */
+
+ if (!probe) {
+ /*
+ * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
+ * when disconnecting ACA even though no
+ * charger was connected. Try waiting a little
+ * longer than the 100 ms of VBUS_DET_DBNC100...
+ */
+ msleep(110);
+ }
ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
AB8500_CH_USBCH_STAT1_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
-
+ dev_dbg(di->dev,
+ "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
+ val);
if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
result |= USB_PW_CONN;
@@ -554,31 +649,53 @@
* Returns error code in case of failure else 0 on success
*/
static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
- enum ab8500_charger_link_status link_status)
+ enum ab8500_charger_link_status link_status)
{
int ret = 0;
+ di->usb_device_is_unrecognised = false;
+
+ /*
+ * Platform only supports USB 2.0.
+ * This means that charging current from USB source
+ * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*
+ * should set USB_CH_IP_CUR_LVL_0P5.
+ */
+
switch (link_status) {
case USB_STAT_STD_HOST_NC:
case USB_STAT_STD_HOST_C_NS:
case USB_STAT_STD_HOST_C_S:
dev_dbg(di->dev, "USB Type - Standard host is "
"detected through USB driver\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS_CHIRP:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
+ break;
case USB_STAT_ACA_RID_C_HS:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
+ di->is_usb_host = false;
+ di->is_aca_rid = 0;
break;
case USB_STAT_ACA_RID_A:
/*
* Dedicated charger level minus maximum current accessory
- * can consume (300mA). Closest level is 1100mA
+ * can consume (900mA). Closest level is 500mA
*/
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1;
+ dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
break;
case USB_STAT_ACA_RID_B:
/*
@@ -586,34 +703,68 @@
* 100mA for potential accessory). Closest level is 1300mA
*/
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr);
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
+ break;
+ case USB_STAT_HOST_CHG_NM:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->is_usb_host = true;
+ di->is_aca_rid = 0;
break;
case USB_STAT_DEDICATED_CHG:
- case USB_STAT_HOST_CHG_NM:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 0;
+ break;
case USB_STAT_ACA_RID_C_HS_CHIRP:
case USB_STAT_ACA_RID_C_NM:
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ di->is_usb_host = false;
+ di->is_aca_rid = 1;
break;
- case USB_STAT_RESERVED:
- /*
- * This state is used to indicate that VBUS has dropped below
- * the detection level 4 times in a row. This is due to the
- * charger output current is set to high making the charger
- * voltage collapse. This have to be propagated through to
- * chargalg. This is done using the property
- * POWER_SUPPLY_PROP_CURRENT_AVG = 1
- */
- di->flags.vbus_collapse = true;
- dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED "
- "VBUS has collapsed\n");
- ret = -1;
- break;
- case USB_STAT_HM_IDGND:
case USB_STAT_NOT_CONFIGURED:
- case USB_STAT_NOT_VALID_LINK:
+ if (di->vbus_detected) {
+ di->usb_device_is_unrecognised = true;
+ dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ break;
+ }
+ case USB_STAT_HM_IDGND:
dev_err(di->dev, "USB Type - Charging not allowed\n");
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
ret = -ENXIO;
break;
+ case USB_STAT_RESERVED:
+ if (is_ab8500(di->parent)) {
+ di->flags.vbus_collapse = true;
+ dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
+ "VBUS has collapsed\n");
+ ret = -ENXIO;
+ break;
+ }
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev, "USB Type - Charging not allowed\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+ link_status, di->max_usb_in_curr);
+ ret = -ENXIO;
+ break;
+ }
+ break;
+ case USB_STAT_CARKIT_1:
+ case USB_STAT_CARKIT_2:
+ case USB_STAT_ACA_DOCK_CHARGER:
+ case USB_STAT_CHARGER_LINE_1:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr);
+ case USB_STAT_NOT_VALID_LINK:
+ dev_err(di->dev, "USB Type invalid - try charging anyway\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ break;
+
default:
dev_err(di->dev, "USB Type - Unknown\n");
di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
@@ -645,8 +796,14 @@
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+ if (is_ab8500(di->parent)) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ } else {
+ if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+ }
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
@@ -682,16 +839,25 @@
ret = abx500_get_register_interruptible(di->dev,
AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
&val);
+ dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
+ __func__, val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
+ dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
+ val);
/*
* Until the IT source register is read the UsbLineStatus
* register is not updated, hence doing the same
@@ -936,6 +1102,144 @@
}
/**
+ * ab8500_charger_set_current() - set charger current
+ * @di: pointer to the ab8500_charger structure
+ * @ich: charger current, in mA
+ * @reg: select what charger register to set
+ *
+ * Set charger current.
+ * There is no state machine in the AB to step up/down the charger
+ * current to avoid dips and spikes on MAIN, VBUS and VBAT when
+ * charging is started. Instead we need to implement
+ * this charger current step-up/down here.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_current(struct ab8500_charger *di,
+ int ich, int reg)
+{
+ int ret = 0;
+ int auto_curr_index, curr_index, prev_curr_index, shift_value, i;
+ u8 reg_value;
+ u32 step_udelay;
+ bool no_stepping = false;
+
+ atomic_inc(&di->current_stepping_sessions);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, ®_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ goto exit_set_current;
+ }
+
+ switch (reg) {
+ case AB8500_MCH_IPT_CURLVL_REG:
+ shift_value = MAIN_CH_INPUT_CURR_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(ich);
+ step_udelay = STEP_UDELAY;
+ if (!di->ac.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_USBCH_IPT_CRNTLVL_REG:
+ shift_value = VBUS_IN_CURR_LIM_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_vbus_in_curr_to_regval(ich);
+ step_udelay = STEP_UDELAY * 100;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT2_REG, ®_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ goto exit_set_current;
+ }
+ auto_curr_index =
+ reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;
+
+ dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
+ __func__,
+ ab8500_charger_vbus_in_curr_map[auto_curr_index]);
+
+ prev_curr_index = min(prev_curr_index, auto_curr_index);
+
+ if (!di->usb.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_CH_OPT_CRNTLVL_REG:
+ shift_value = 0;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(ich);
+ step_udelay = STEP_UDELAY;
+ if (curr_index && (curr_index - prev_curr_index) > 1)
+ step_udelay *= 100;
+
+ if (!di->usb.charger_connected && !di->ac.charger_connected)
+ no_stepping = true;
+
+ break;
+ default:
+ dev_err(di->dev, "%s current register not valid\n", __func__);
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ if (curr_index < 0) {
+ dev_err(di->dev, "requested current limit out-of-range\n");
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ /* only update current if it's been changed */
+ if (prev_curr_index == curr_index) {
+ dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
+ __func__, reg);
+ ret = 0;
+ goto exit_set_current;
+ }
+
+ dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n",
+ __func__, ich, reg);
+
+ if (no_stepping) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, (u8)curr_index << shift_value);
+ if (ret)
+ dev_err(di->dev, "%s write failed\n", __func__);
+ } else if (prev_curr_index > curr_index) {
+ for (i = prev_curr_index - 1; i >= curr_index; i--) {
+ dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
+ (u8) i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+ }
+ } else {
+ for (i = prev_curr_index + 1; i <= curr_index; i++) {
+ dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
+ (u8)i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+ }
+ }
+
+exit_set_current:
+ atomic_dec(&di->current_stepping_sessions);
+
+ return ret;
+}
+
+/**
* ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
* @di: pointer to the ab8500_charger structure
* @ich_in: charger input current limit
@@ -946,12 +1250,11 @@
static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
int ich_in)
{
- int ret;
- int input_curr_index;
int min_value;
+ int ret;
/* We should always use to lowest current limit */
- min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
+ min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
switch (min_value) {
case 100:
@@ -966,22 +1269,47 @@
break;
}
- input_curr_index = ab8500_vbus_in_curr_to_regval(min_value);
- if (input_curr_index < 0) {
- dev_err(di->dev, "VBUS input current limit too high\n");
- return -ENXIO;
- }
+ dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value);
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_USBCH_IPT_CRNTLVL_REG,
- input_curr_index << VBUS_IN_CURR_LIM_SHIFT);
- if (ret)
- dev_err(di->dev, "%s write failed\n", __func__);
+ mutex_lock(&di->usb_ipt_crnt_lock);
+ ret = ab8500_charger_set_current(di, min_value,
+ AB8500_USBCH_IPT_CRNTLVL_REG);
+ mutex_unlock(&di->usb_ipt_crnt_lock);
return ret;
}
/**
+ * ab8500_charger_set_main_in_curr() - set main charger input current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: input charger current, in mA
+ *
+ * Set main charger input current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ return ab8500_charger_set_current(di, ich_in,
+ AB8500_MCH_IPT_CURLVL_REG);
+}
+
+/**
+ * ab8500_charger_set_output_curr() - set charger output current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_out: output charger current, in mA
+ *
+ * Set charger output current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
+ int ich_out)
+{
+ return ab8500_charger_set_current(di, ich_out,
+ AB8500_CH_OPT_CRNTLVL_REG);
+}
+
+/**
* ab8500_charger_led_en() - turn on/off chargign led
* @di: pointer to the ab8500_charger structure
* @on: flag to turn on/off the chargign led
@@ -1074,7 +1402,7 @@
volt_index = ab8500_voltage_to_regval(vset);
curr_index = ab8500_current_to_regval(iset);
input_curr_index = ab8500_current_to_regval(
- di->bat->chg_params->ac_curr_max);
+ di->bm->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -1090,23 +1418,24 @@
return ret;
}
/* MainChInputCurr: current that can be drawn from the charger*/
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_MCH_IPT_CURLVL_REG,
- input_curr_index << MAIN_CH_INPUT_CURR_SHIFT);
+ ret = ab8500_charger_set_main_in_curr(di,
+ di->bm->chg_params->ac_curr_max);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
+ __func__);
return ret;
}
/* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, iset);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
/* Enable Main Charger */
@@ -1158,12 +1487,11 @@
return ret;
}
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1);
+ ret = ab8500_charger_set_output_curr(di, 0);
if (ret) {
- dev_err(di->dev,
- "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
} else {
@@ -1259,24 +1587,13 @@
dev_err(di->dev, "%s write failed\n", __func__);
return ret;
}
- /* USBChInputCurr: current that can be drawn from the usb */
- ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
- if (ret) {
- dev_err(di->dev, "setting USBChInputCurr failed\n");
- return ret;
- }
- /* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
- if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
- return ret;
- }
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
/* Enable USB Charger */
+ dev_dbg(di->dev,
+ "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
if (ret) {
@@ -1289,11 +1606,29 @@
if (ret < 0)
dev_err(di->dev, "failed to enable LED\n");
+ di->usb.charger_online = 1;
+
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, ich_out);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+
queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
- di->usb.charger_online = 1;
} else {
/* Disable USB charging */
+ dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
ret = abx500_set_register_interruptible(di->dev,
AB8500_CHARGER,
AB8500_USBCH_CTRL1_REG, 0);
@@ -1306,7 +1641,21 @@
ret = ab8500_charger_led_en(di, false);
if (ret < 0)
dev_err(di->dev, "failed to disable LED\n");
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to reset ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
di->usb.charger_online = 0;
di->usb.wd_expired = false;
@@ -1366,7 +1715,6 @@
int ich_out)
{
int ret;
- int curr_index;
struct ab8500_charger *di;
if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
@@ -1376,18 +1724,11 @@
else
return -ENXIO;
- curr_index = ab8500_current_to_regval(ich_out);
- if (curr_index < 0) {
- dev_err(di->dev,
- "Charger current too high, "
- "charging not started\n");
- return -ENXIO;
- }
-
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, ich_out);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
@@ -1597,7 +1938,7 @@
* synchronously, we have the check if the main charger is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
+ ret = ab8500_charger_detect_chargers(di, false);
if (ret < 0)
return;
@@ -1612,6 +1953,84 @@
sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
}
+static void ab8500_charger_usb_attached_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ usb_charger_attached_work.work);
+ int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+ if ((statval & usbch) != usbch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+}
+
+static void ab8500_charger_ac_attached_work(struct work_struct *work)
+{
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ ac_charger_attached_work.work);
+ int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
+ MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_STATUS2_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+
+ if ((statval & mainch) != mainch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
+ queue_work(di->charger_wq, &di->ac_work);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+}
+
/**
* ab8500_charger_detect_usb_type_work() - work to detect USB type
* @work: Pointer to the work_struct structure
@@ -1630,16 +2049,18 @@
* synchronously, we have the check if is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
+ ret = ab8500_charger_detect_chargers(di, false);
if (ret < 0)
return;
if (!(ret & USB_PW_CONN)) {
- di->vbus_detected = 0;
+ dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
+ di->vbus_detected = false;
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
} else {
- di->vbus_detected = 1;
+ dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
+ di->vbus_detected = true;
if (is_ab8500_1p1_or_earlier(di->parent)) {
ret = ab8500_charger_detect_usb_type(di);
@@ -1649,7 +2070,8 @@
&di->usb_chg.psy);
}
} else {
- /* For ABB cut2.0 and onwards we have an IRQ,
+ /*
+ * For ABB cut2.0 and onwards we have an IRQ,
* USB_LINK_STATUS that will be triggered when the USB
* link status changes. The exception is USB connected
* during startup. Then we don't get a
@@ -1670,6 +2092,29 @@
}
/**
+ * ab8500_charger_usb_link_attach_work() - work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+ struct ab8500_charger *di =
+ container_of(work, struct ab8500_charger, attach_work.work);
+ int ret;
+
+ /* Update maximum input current if USB enumeration is not detected */
+ if (!di->usb.charger_online) {
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret)
+ return;
+ }
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
* ab8500_charger_usb_link_status_work() - work to detect USB type
* @work: pointer to the work_struct structure
*
@@ -1677,7 +2122,9 @@
*/
static void ab8500_charger_usb_link_status_work(struct work_struct *work)
{
+ int detected_chargers;
int ret;
+ u8 val;
struct ab8500_charger *di = container_of(work,
struct ab8500_charger, usb_link_status_work);
@@ -1687,31 +2134,95 @@
* synchronously, we have the check if is
* connected by reading the status register
*/
- ret = ab8500_charger_detect_chargers(di);
- if (ret < 0)
+ detected_chargers = ab8500_charger_detect_chargers(di, false);
+ if (detected_chargers < 0)
return;
- if (!(ret & USB_PW_CONN)) {
- di->vbus_detected = 0;
+ /*
+ * Some chargers that breaks the USB spec is
+ * identified as invalid by AB8500 and it refuse
+ * to start the charging process. but by jumping
+ * thru a few hoops it can be forced to start.
+ */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ if (ret >= 0)
+ dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
+ else
+ dev_dbg(di->dev, "Error reading USB link status\n");
+
+ if (detected_chargers & USB_PW_CONN) {
+ if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK &&
+ di->invalid_charger_detect_state == 0) {
+ dev_dbg(di->dev, "Invalid charger detected, state= 0\n");
+ /*Enable charger*/
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01);
+ /*Enable charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
+ AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
+ di->invalid_charger_detect_state = 1;
+ /*exit and wait for new link status interrupt.*/
+ return;
+
+ }
+ if (di->invalid_charger_detect_state == 1) {
+ dev_dbg(di->dev, "Invalid charger detected, state= 1\n");
+ /*Stop charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
+ AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
+ /*Check link status*/
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ dev_dbg(di->dev, "USB link status= 0x%02x\n",
+ (val & AB8500_USB_LINK_STATUS) >> 3);
+ di->invalid_charger_detect_state = 2;
+ }
+ } else {
+ di->invalid_charger_detect_state = 0;
+ }
+
+ if (!(detected_chargers & USB_PW_CONN)) {
+ di->vbus_detected = false;
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else {
- di->vbus_detected = 1;
- ret = ab8500_charger_read_usb_type(di);
- if (!ret) {
- /* Update maximum input current */
- ret = ab8500_charger_set_vbus_in_curr(di,
- di->max_usb_in_curr);
- if (ret)
- return;
+ return;
+ }
- ab8500_charger_set_usb_connected(di, true);
- ab8500_power_supply_changed(di, &di->usb_chg.psy);
- } else if (ret == -ENXIO) {
+ dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
+ di->vbus_detected = true;
+ ret = ab8500_charger_read_usb_type(di);
+ if (ret) {
+ if (ret == -ENXIO) {
/* No valid charger type detected */
ab8500_charger_set_usb_connected(di, false);
ab8500_power_supply_changed(di, &di->usb_chg.psy);
}
+ return;
+ }
+
+ if (di->usb_device_is_unrecognised) {
+ dev_dbg(di->dev,
+ "Potential Legacy Charger device. "
+ "Delay work for %d msec for USB enum "
+ "to finish",
+ WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else if (di->is_aca_rid == 1) {
+ /* Only wait once */
+ di->is_aca_rid++;
+ dev_dbg(di->dev,
+ "%s Wait %d msec for USB enum to finish",
+ __func__, WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else {
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ 0);
}
}
@@ -1721,24 +2232,20 @@
unsigned long flags;
struct ab8500_charger *di = container_of(work,
- struct ab8500_charger, usb_state_changed_work);
+ struct ab8500_charger, usb_state_changed_work.work);
- if (!di->vbus_detected)
+ if (!di->vbus_detected) {
+ dev_dbg(di->dev,
+ "%s !di->vbus_detected\n",
+ __func__);
return;
+ }
spin_lock_irqsave(&di->usb_state.usb_lock, flags);
- di->usb_state.usb_changed = false;
+ di->usb_state.state = di->usb_state.state_tmp;
+ di->usb_state.usb_current = di->usb_state.usb_current_tmp;
spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
- /*
- * wait for some time until you get updates from the usb stack
- * and negotiations are completed
- */
- msleep(250);
-
- if (di->usb_state.usb_changed)
- return;
-
dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
__func__, di->usb_state.state, di->usb_state.usb_current);
@@ -1892,6 +2399,10 @@
dev_dbg(di->dev, "Main charger unplugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ cancel_delayed_work_sync(&di->ac_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
return IRQ_HANDLED;
}
@@ -1909,6 +2420,11 @@
dev_dbg(di->dev, "Main charger plugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
return IRQ_HANDLED;
}
@@ -1971,6 +2487,21 @@
return IRQ_HANDLED;
}
+static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, vbus_drop_end_work.work);
+
+ di->flags.vbus_drop_end = false;
+
+ /* Reset the drop counter */
+ abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
+
+ if (di->usb.charger_connected)
+ ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+}
+
/**
* ab8500_charger_vbusdetf_handler() - VBUS falling detected
* @irq: interrupt number
@@ -1982,6 +2513,7 @@
{
struct ab8500_charger *di = _di;
+ di->vbus_detected = false;
dev_dbg(di->dev, "VBUS falling detected\n");
queue_work(di->charger_wq, &di->detect_usb_type_work);
@@ -2001,6 +2533,7 @@
di->vbus_detected = true;
dev_dbg(di->dev, "VBUS rising detected\n");
+
queue_work(di->charger_wq, &di->detect_usb_type_work);
return IRQ_HANDLED;
@@ -2109,6 +2642,25 @@
}
/**
+ * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS charger drop ended\n");
+ di->flags.vbus_drop_end = true;
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
+ round_jiffies(30 * HZ));
+
+ return IRQ_HANDLED;
+}
+
+/**
* ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
* @irq: interrupt number
* @_di: pointer to the ab8500_charger structure
@@ -2148,6 +2700,7 @@
union power_supply_propval *val)
{
struct ab8500_charger *di;
+ int ret;
di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
@@ -2169,7 +2722,10 @@
val->intval = di->ac.charger_connected;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di);
+ ret = ab8500_charger_get_ac_voltage(di);
+ if (ret >= 0)
+ di->ac.charger_voltage = ret;
+ /* On error, use previous value */
val->intval = di->ac.charger_voltage * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2181,7 +2737,10 @@
val->intval = di->ac.cv_active;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = ab8500_charger_get_ac_current(di) * 1000;
+ ret = ab8500_charger_get_ac_current(di);
+ if (ret >= 0)
+ di->ac.charger_current = ret;
+ val->intval = di->ac.charger_current * 1000;
break;
default:
return -EINVAL;
@@ -2208,6 +2767,7 @@
union power_supply_propval *val)
{
struct ab8500_charger *di;
+ int ret;
di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
@@ -2231,7 +2791,9 @@
val->intval = di->usb.charger_connected;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di);
+ ret = ab8500_charger_get_vbus_voltage(di);
+ if (ret >= 0)
+ di->usb.charger_voltage = ret;
val->intval = di->usb.charger_voltage * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2243,7 +2805,10 @@
val->intval = di->usb.cv_active;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = ab8500_charger_get_usb_current(di) * 1000;
+ ret = ab8500_charger_get_usb_current(di);
+ if (ret >= 0)
+ di->usb.charger_current = ret;
+ val->intval = di->usb.charger_current * 1000;
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
/*
@@ -2293,13 +2858,23 @@
}
}
- /* VBUS OVV set to 6.3V and enable automatic current limitiation */
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_USBCH_CTRL2_REG,
- VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+ if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent))
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_AUTO_IN_CURR_LIM_ENA,
+ VBUS_AUTO_IN_CURR_LIM_ENA);
+ else
+ /*
+ * VBUS OVV set to 6.3V and enable automatic current limitation
+ */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
if (ret) {
- dev_err(di->dev, "failed to set VBUS OVV\n");
+ dev_err(di->dev,
+ "failed to set automatic current limitation\n");
goto out;
}
@@ -2355,12 +2930,26 @@
goto out;
}
+ /* Set charger watchdog timeout */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_WD_TIMER_REG, WD_TIMER);
+ if (ret) {
+ dev_err(di->dev, "failed to set charger watchdog timeout\n");
+ goto out;
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to disable LED\n");
+ goto out;
+ }
+
/* Backup battery voltage and current */
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
- di->bat->bkup_bat_v |
- di->bat->bkup_bat_i);
+ di->bm->bkup_bat_v |
+ di->bm->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
@@ -2394,6 +2983,7 @@
{"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
{"VBUS_OVV", ab8500_charger_vbusovv_handler},
{"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+ {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
};
static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
@@ -2404,6 +2994,9 @@
enum ab8500_usb_state bm_usb_state;
unsigned mA = *((unsigned *)power);
+ if (!di)
+ return NOTIFY_DONE;
+
if (event != USB_EVENT_VBUS) {
dev_dbg(di->dev, "not a standard host, returning\n");
return NOTIFY_DONE;
@@ -2427,13 +3020,15 @@
__func__, bm_usb_state, mA);
spin_lock(&di->usb_state.usb_lock);
- di->usb_state.usb_changed = true;
+ di->usb_state.state_tmp = bm_usb_state;
+ di->usb_state.usb_current_tmp = mA;
spin_unlock(&di->usb_state.usb_lock);
- di->usb_state.state = bm_usb_state;
- di->usb_state.usb_current = mA;
-
- queue_work(di->charger_wq, &di->usb_state_changed_work);
+ /*
+ * wait for some time until you get updates from the usb stack
+ * and negotiations are completed
+ */
+ queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2);
return NOTIFY_OK;
}
@@ -2473,6 +3068,9 @@
&di->check_hw_failure_work, 0);
}
+ if (di->flags.vbus_drop_end)
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0);
+
return 0;
}
@@ -2485,6 +3083,23 @@
if (delayed_work_pending(&di->check_hw_failure_work))
cancel_delayed_work(&di->check_hw_failure_work);
+ if (delayed_work_pending(&di->vbus_drop_end_work))
+ cancel_delayed_work(&di->vbus_drop_end_work);
+
+ flush_delayed_work(&di->attach_work);
+ flush_delayed_work(&di->usb_charger_attached_work);
+ flush_delayed_work(&di->ac_charger_attached_work);
+ flush_delayed_work(&di->check_usbchgnotok_work);
+ flush_delayed_work(&di->check_vbat_work);
+ flush_delayed_work(&di->kick_wd_work);
+
+ flush_work(&di->usb_link_status_work);
+ flush_work(&di->ac_work);
+ flush_work(&di->detect_usb_type_work);
+
+ if (atomic_read(&di->current_stepping_sessions))
+ return -EAGAIN;
+
return 0;
}
#else
@@ -2509,9 +3124,6 @@
free_irq(irq, di);
}
- /* disable the regulator */
- regulator_put(di->regu);
-
/* Backup battery voltage and current disable */
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
@@ -2525,8 +3137,12 @@
destroy_workqueue(di->charger_wq);
flush_scheduled_work();
- power_supply_unregister(&di->usb_chg.psy);
- power_supply_unregister(&di->ac_chg.psy);
+ if(di->usb_chg.enabled)
+ power_supply_unregister(&di->usb_chg.psy);
+#if !defined(CONFIG_CHARGER_PM2301)
+ if(di->ac_chg.enabled)
+ power_supply_unregister(&di->ac_chg.psy);
+#endif
platform_set_drvdata(pdev, NULL);
return 0;
@@ -2541,32 +3157,31 @@
static int ab8500_charger_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_charger *di;
- int irq, i, charger_status, ret = 0;
+ int irq, i, charger_status, ret = 0, ch_stat;
di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
if (!di) {
dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");
- return -EINVAL;
- }
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
- di->autopower_cfg = false;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
}
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
+ }
+ di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+ } else
+ di->autopower_cfg = false;
/* get parent data */
di->dev = &pdev->dev;
@@ -2575,8 +3190,10 @@
/* initialize lock */
spin_lock_init(&di->usb_state.usb_lock);
+ mutex_init(&di->usb_ipt_crnt_lock);
di->autopower = false;
+ di->invalid_charger_detect_state = 0;
/* AC supply */
/* power_supply base class */
@@ -2595,6 +3212,9 @@
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
di->ac_chg.max_out_curr = ab8500_charger_current_map[
ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->ac_chg.enabled = di->bm->ac_enabled;
+ di->ac_chg.external = false;
/* USB supply */
/* power_supply base class */
@@ -2613,7 +3233,9 @@
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
di->usb_chg.max_out_curr = ab8500_charger_current_map[
ARRAY_SIZE(ab8500_charger_current_map) - 1];
-
+ di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->usb_chg.enabled = di->bm->usb_enabled;
+ di->usb_chg.external = false;
/* Create a work queue for the charger */
di->charger_wq =
@@ -2623,12 +3245,19 @@
return -ENOMEM;
}
+ mutex_init(&di->charger_attached_mutex);
+
/* Init work for HW failure check */
INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
ab8500_charger_check_hw_failure_work);
INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
ab8500_charger_check_usbchargernotok_work);
+ INIT_DELAYED_WORK(&di->ac_charger_attached_work,
+ ab8500_charger_ac_attached_work);
+ INIT_DELAYED_WORK(&di->usb_charger_attached_work,
+ ab8500_charger_usb_attached_work);
+
/*
* For ABB revision 1.0 and 1.1 there is a bug in the watchdog
* logic. That means we have to continously kick the charger
@@ -2644,6 +3273,15 @@
INIT_DEFERRABLE_WORK(&di->check_vbat_work,
ab8500_charger_check_vbat_work);
+ INIT_DELAYED_WORK(&di->attach_work,
+ ab8500_charger_usb_link_attach_work);
+
+ INIT_DELAYED_WORK(&di->usb_state_changed_work,
+ ab8500_charger_usb_state_changed_work);
+
+ INIT_DELAYED_WORK(&di->vbus_drop_end_work,
+ ab8500_charger_vbus_drop_end_work);
+
/* Init work for charger detection */
INIT_WORK(&di->usb_link_status_work,
ab8500_charger_usb_link_status_work);
@@ -2651,9 +3289,6 @@
INIT_WORK(&di->detect_usb_type_work,
ab8500_charger_detect_usb_type_work);
- INIT_WORK(&di->usb_state_changed_work,
- ab8500_charger_usb_state_changed_work);
-
/* Init work for checking HW status */
INIT_WORK(&di->check_main_thermal_prot_work,
ab8500_charger_check_main_thermal_prot_work);
@@ -2665,7 +3300,7 @@
* is a charger connected to avoid erroneous BTEMP_HIGH/LOW
* interrupts during charging
*/
- di->regu = regulator_get(di->dev, "vddadc");
+ di->regu = devm_regulator_get(di->dev, "vddadc");
if (IS_ERR(di->regu)) {
ret = PTR_ERR(di->regu);
dev_err(di->dev, "failed to get vddadc regulator\n");
@@ -2677,21 +3312,25 @@
ret = ab8500_charger_init_hw_registers(di);
if (ret) {
dev_err(di->dev, "failed to initialize ABB registers\n");
- goto free_regulator;
+ goto free_charger_wq;
}
/* Register AC charger class */
- ret = power_supply_register(di->dev, &di->ac_chg.psy);
- if (ret) {
- dev_err(di->dev, "failed to register AC charger\n");
- goto free_regulator;
+ if(di->ac_chg.enabled) {
+ ret = power_supply_register(di->dev, &di->ac_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register AC charger\n");
+ goto free_charger_wq;
+ }
}
/* Register USB charger class */
- ret = power_supply_register(di->dev, &di->usb_chg.psy);
- if (ret) {
- dev_err(di->dev, "failed to register USB charger\n");
- goto free_ac;
+ if(di->usb_chg.enabled) {
+ ret = power_supply_register(di->dev, &di->usb_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register USB charger\n");
+ goto free_ac;
+ }
}
di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -2708,7 +3347,7 @@
}
/* Identify the connected charger types during startup */
- charger_status = ab8500_charger_detect_chargers(di);
+ charger_status = ab8500_charger_detect_chargers(di, true);
if (charger_status & AC_PW_CONN) {
di->ac.charger_connected = 1;
di->ac_conn = true;
@@ -2717,7 +3356,6 @@
}
if (charger_status & USB_PW_CONN) {
- dev_dbg(di->dev, "VBUS Detect during startup\n");
di->vbus_detected = true;
di->vbus_detected_start = true;
queue_work(di->charger_wq,
@@ -2742,6 +3380,23 @@
platform_set_drvdata(pdev, di);
+ mutex_lock(&di->charger_attached_mutex);
+
+ ch_stat = ab8500_charger_detect_chargers(di, false);
+
+ if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+ }
+ if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ }
+
+ mutex_unlock(&di->charger_attached_mutex);
+
return ret;
free_irq:
@@ -2755,11 +3410,11 @@
put_usb_phy:
usb_put_phy(di->usb_phy);
free_usb:
- power_supply_unregister(&di->usb_chg.psy);
+ if(di->usb_chg.enabled)
+ power_supply_unregister(&di->usb_chg.psy);
free_ac:
- power_supply_unregister(&di->ac_chg.psy);
-free_regulator:
- regulator_put(di->regu);
+ if(di->ac_chg.enabled)
+ power_supply_unregister(&di->ac_chg.psy);
free_charger_wq:
destroy_workqueue(di->charger_wq);
return ret;
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index b3bf178..25dae4c 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -32,6 +32,7 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/kernel.h>
#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
@@ -42,7 +43,7 @@
#define NBR_AVG_SAMPLES 20
-#define LOW_BAT_CHECK_INTERVAL (2 * HZ)
+#define LOW_BAT_CHECK_INTERVAL (HZ / 16) /* 62.5 ms */
#define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */
#define BATT_OK_MIN 2360 /* mV */
@@ -113,6 +114,13 @@
int sum;
};
+struct ab8500_fg_cap_scaling {
+ bool enable;
+ int cap_to_scale[2];
+ int disable_cap_level;
+ int scaled_cap;
+};
+
struct ab8500_fg_battery_capacity {
int max_mah_design;
int max_mah;
@@ -123,6 +131,7 @@
int prev_percent;
int prev_level;
int user_mah;
+ struct ab8500_fg_cap_scaling cap_scale;
};
struct ab8500_fg_flags {
@@ -160,6 +169,8 @@
* @recovery_cnt: Counter for recovery mode
* @high_curr_cnt: Counter for high current mode
* @init_cnt: Counter for init mode
+ * @low_bat_cnt Counter for number of consecutive low battery measures
+ * @nbr_cceoc_irq_cnt Counter for number of CCEOC irqs received since enabled
* @recovery_needed: Indicate if recovery is needed
* @high_curr_mode: Indicate if we're in high current mode
* @init_capacity: Indicate if initial capacity measuring should be done
@@ -167,13 +178,14 @@
* @calib_state State during offset calibration
* @discharge_state: Current discharge state
* @charge_state: Current charge state
+ * @ab8500_fg_started Completion struct used for the instant current start
* @ab8500_fg_complete Completion struct used for the instant current reading
* @flags: Structure for information about events triggered
* @bat_cap: Structure for battery capacity specific parameters
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
* @fg_periodic_work: Work to run the FG algorithm periodically
@@ -199,6 +211,8 @@
int recovery_cnt;
int high_curr_cnt;
int init_cnt;
+ int low_bat_cnt;
+ int nbr_cceoc_irq_cnt;
bool recovery_needed;
bool high_curr_mode;
bool init_capacity;
@@ -206,13 +220,14 @@
enum ab8500_fg_calibration_state calib_state;
enum ab8500_fg_discharge_state discharge_state;
enum ab8500_fg_charge_state charge_state;
+ struct completion ab8500_fg_started;
struct completion ab8500_fg_complete;
struct ab8500_fg_flags flags;
struct ab8500_fg_battery_capacity bat_cap;
struct ab8500_fg_avg_cap avg_cap;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply fg_psy;
struct workqueue_struct *fg_wq;
struct delayed_work fg_periodic_work;
@@ -355,7 +370,7 @@
/*
* We want to know if we're in low current mode
*/
- if (curr > -di->bat->fg_params->high_curr_threshold)
+ if (curr > -di->bm->fg_params->high_curr_threshold)
return true;
else
return false;
@@ -484,8 +499,9 @@
di->flags.fg_enabled = true;
} else {
/* Clear any pending read requests */
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ (RESET_ACCU | READ_REQ), 0);
if (ret)
goto cc_err;
@@ -523,13 +539,14 @@
* Note: This is part "one" and has to be called before
* ab8500_fg_inst_curr_finalize()
*/
- int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
{
u8 reg_val;
int ret;
mutex_lock(&di->cc_lock);
+ di->nbr_cceoc_irq_cnt = 0;
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
AB8500_RTC_CC_CONF_REG, ®_val);
if (ret < 0)
@@ -557,6 +574,7 @@
}
/* Return and WFI */
+ INIT_COMPLETION(di->ab8500_fg_started);
INIT_COMPLETION(di->ab8500_fg_complete);
enable_irq(di->irq);
@@ -568,6 +586,17 @@
}
/**
+ * ab8500_fg_inst_curr_started() - check if fg conversion has started
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion started, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
+{
+ return completion_done(&di->ab8500_fg_started);
+}
+
+/**
* ab8500_fg_inst_curr_done() - check if fg conversion is done
* @di: pointer to the ab8500_fg structure
*
@@ -595,13 +624,15 @@
int timeout;
if (!completion_done(&di->ab8500_fg_complete)) {
- timeout = wait_for_completion_timeout(&di->ab8500_fg_complete,
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_complete,
INS_CURR_TIMEOUT);
dev_dbg(di->dev, "Finalize time: %d ms\n",
((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);
if (!timeout) {
ret = -ETIME;
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
dev_err(di->dev, "completion timed out [%d]\n",
__LINE__);
goto fail;
@@ -609,6 +640,7 @@
}
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
@@ -647,7 +679,7 @@
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
- (1000 * di->bat->fg_res);
+ (1000 * di->bm->fg_res);
if (di->turn_off_fg) {
dev_dbg(di->dev, "%s Disable FG\n", __func__);
@@ -683,6 +715,7 @@
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
{
int ret;
+ int timeout;
int res = 0;
ret = ab8500_fg_inst_curr_start(di);
@@ -691,13 +724,33 @@
return 0;
}
+ /* Wait for CC to actually start */
+ if (!completion_done(&di->ab8500_fg_started)) {
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_started,
+ INS_CURR_TIMEOUT);
+ dev_dbg(di->dev, "Start time: %d ms\n",
+ ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ);
+ if (!timeout) {
+ ret = -ETIME;
+ dev_err(di->dev, "completion timed out [%d]\n",
+ __LINE__);
+ goto fail;
+ }
+ }
+
ret = ab8500_fg_inst_curr_finalize(di, &res);
if (ret) {
dev_err(di->dev, "Failed to finalize fg_inst\n");
return 0;
}
+ dev_dbg(di->dev, "%s instant current: %d", __func__, res);
return res;
+fail:
+ disable_irq(di->irq);
+ mutex_unlock(&di->cc_lock);
+ return ret;
}
/**
@@ -750,19 +803,16 @@
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
- (100 * di->bat->fg_res);
+ (100 * di->bm->fg_res);
/*
* Convert to unit value in mA
- * Full scale input voltage is
- * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA
- * Given a 250ms conversion cycle time the LSB corresponds
- * to 112.9 nAh. Convert to current by dividing by the conversion
+ * by dividing by the conversion
* time in hours (= samples / (3600 * 4)h)
- * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+ * and multiply with 1000
*/
di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
- (1000 * di->bat->fg_res * (di->fg_samples / 4));
+ (1000 * di->bm->fg_res * (di->fg_samples / 4));
di->flags.conv_done = true;
@@ -770,6 +820,8 @@
queue_work(di->fg_wq, &di->fg_work);
+ dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+ di->bm->fg_res, di->fg_samples, val, di->accu_charge);
return;
exit:
dev_err(di->dev,
@@ -814,8 +866,8 @@
struct abx500_v_to_cap *tbl;
int cap = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl,
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl,
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (voltage > tbl[i].voltage)
@@ -866,8 +918,8 @@
struct batres_vs_temp *tbl;
int resist = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl;
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (di->bat_temp / 10 > tbl[i].temp)
@@ -888,11 +940,11 @@
dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
" fg resistance %d, total: %d (mOhm)\n",
- __func__, di->bat_temp, resist, di->bat->fg_res / 10,
- (di->bat->fg_res / 10) + resist);
+ __func__, di->bat_temp, resist, di->bm->fg_res / 10,
+ (di->bm->fg_res / 10) + resist);
/* fg_res variable is in 0.1mOhm */
- resist += di->bat->fg_res / 10;
+ resist += di->bm->fg_res / 10;
return resist;
}
@@ -915,7 +967,7 @@
do {
vbat += ab8500_fg_bat_voltage(di);
i++;
- msleep(5);
+ usleep_range(5000, 6000);
} while (!ab8500_fg_inst_curr_done(di));
ab8500_fg_inst_curr_finalize(di, &di->inst_curr);
@@ -1108,16 +1160,16 @@
{
int ret, percent;
- percent = di->bat_cap.permille / 10;
+ percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
- if (percent <= di->bat->cap_levels->critical ||
+ if (percent <= di->bm->cap_levels->critical ||
di->flags.low_bat)
ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
- else if (percent <= di->bat->cap_levels->low)
+ else if (percent <= di->bm->cap_levels->low)
ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
- else if (percent <= di->bat->cap_levels->normal)
+ else if (percent <= di->bm->cap_levels->normal)
ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
- else if (percent <= di->bat->cap_levels->high)
+ else if (percent <= di->bm->cap_levels->high)
ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
else
ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
@@ -1126,6 +1178,99 @@
}
/**
+ * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Calculates the capacity to be shown to upper layers. Scales the capacity
+ * to have 100% as a reference from the actual capacity upon removal of charger
+ * when charging is in maintenance mode.
+ */
+static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+ int capacity = di->bat_cap.prev_percent;
+
+ if (!cs->enable)
+ return capacity;
+
+ /*
+ * As long as we are in fully charge mode scale the capacity
+ * to show 100%.
+ */
+ if (di->flags.fully_charged) {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(capacity, di->bm->fg_params->maint_thres);
+ dev_dbg(di->dev, "Scale cap with %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+
+ /* Calculates the scaled capacity. */
+ if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
+ && (cs->cap_to_scale[1] > 0))
+ capacity = min(100,
+ DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
+ cs->cap_to_scale[0],
+ cs->cap_to_scale[1]));
+
+ if (di->flags.charging) {
+ if (capacity < cs->disable_cap_level) {
+ cs->disable_cap_level = capacity;
+ dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
+ cs->disable_cap_level);
+ } else if (!di->flags.fully_charged) {
+ if (di->bat_cap.prev_percent >=
+ cs->disable_cap_level) {
+ dev_dbg(di->dev, "Disabling scaled capacity\n");
+ cs->enable = false;
+ capacity = di->bat_cap.prev_percent;
+ } else {
+ dev_dbg(di->dev,
+ "Waiting in cap to level %d%%\n",
+ cs->disable_cap_level);
+ capacity = cs->disable_cap_level;
+ }
+ }
+ }
+
+ return capacity;
+}
+
+/**
+ * ab8500_fg_update_cap_scalers() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * To be called when state change from charge<->discharge to update
+ * the capacity scalers.
+ */
+static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+
+ if (!cs->enable)
+ return;
+ if (di->flags.charging) {
+ di->bat_cap.cap_scale.disable_cap_level =
+ di->bat_cap.cap_scale.scaled_cap;
+ dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
+ di->bat_cap.cap_scale.disable_cap_level);
+ } else {
+ if (cs->scaled_cap != 100) {
+ cs->cap_to_scale[0] = cs->scaled_cap;
+ cs->cap_to_scale[1] = di->bat_cap.prev_percent;
+ } else {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(di->bat_cap.prev_percent,
+ di->bm->fg_params->maint_thres);
+ }
+
+ dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+}
+
+/**
* ab8500_fg_check_capacity_limits() - Check if capacity has changed
* @di: pointer to the ab8500_fg structure
* @init: capacity is allowed to go up in init mode
@@ -1136,6 +1281,7 @@
static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
{
bool changed = false;
+ int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
di->bat_cap.level = ab8500_fg_capacity_level(di);
@@ -1167,33 +1313,41 @@
dev_dbg(di->dev, "Battery low, set capacity to 0\n");
di->bat_cap.prev_percent = 0;
di->bat_cap.permille = 0;
+ percent = 0;
di->bat_cap.prev_mah = 0;
di->bat_cap.mah = 0;
changed = true;
} else if (di->flags.fully_charged) {
/*
* We report 100% if algorithm reported fully charged
- * unless capacity drops too much
+ * and show 100% during maintenance charging (scaling).
*/
if (di->flags.force_full) {
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
- } else if (!di->flags.force_full &&
- di->bat_cap.prev_percent !=
- (di->bat_cap.permille) / 10 &&
- (di->bat_cap.permille / 10) <
- di->bat->fg_params->maint_thres) {
+
+ changed = true;
+
+ if (!di->bat_cap.cap_scale.enable &&
+ di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.enable = true;
+ di->bat_cap.cap_scale.cap_to_scale[0] = 100;
+ di->bat_cap.cap_scale.cap_to_scale[1] =
+ di->bat_cap.prev_percent;
+ di->bat_cap.cap_scale.disable_cap_level = 100;
+ }
+ } else if (di->bat_cap.prev_percent != percent) {
dev_dbg(di->dev,
"battery reported full "
"but capacity dropping: %d\n",
- di->bat_cap.permille / 10);
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ percent);
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
changed = true;
}
- } else if (di->bat_cap.prev_percent != di->bat_cap.permille / 10) {
- if (di->bat_cap.permille / 10 == 0) {
+ } else if (di->bat_cap.prev_percent != percent) {
+ if (percent == 0) {
/*
* We will not report 0% unless we've got
* the LOW_BAT IRQ, no matter what the FG
@@ -1203,11 +1357,11 @@
di->bat_cap.permille = 1;
di->bat_cap.prev_mah = 1;
di->bat_cap.mah = 1;
+ percent = 1;
changed = true;
} else if (!(!di->flags.charging &&
- (di->bat_cap.permille / 10) >
- di->bat_cap.prev_percent) || init) {
+ percent > di->bat_cap.prev_percent) || init) {
/*
* We do not allow reported capacity to go up
* unless we're charging or if we're in init
@@ -1215,9 +1369,9 @@
dev_dbg(di->dev,
"capacity changed from %d to %d (%d)\n",
di->bat_cap.prev_percent,
- di->bat_cap.permille / 10,
+ percent,
di->bat_cap.permille);
- di->bat_cap.prev_percent = di->bat_cap.permille / 10;
+ di->bat_cap.prev_percent = percent;
di->bat_cap.prev_mah = di->bat_cap.mah;
changed = true;
@@ -1225,12 +1379,20 @@
dev_dbg(di->dev, "capacity not allowed to go up since "
"no charger is connected: %d to %d (%d)\n",
di->bat_cap.prev_percent,
- di->bat_cap.permille / 10,
+ percent,
di->bat_cap.permille);
}
}
if (changed) {
+ if (di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.scaled_cap =
+ ab8500_fg_calculate_scaled_capacity(di);
+
+ dev_info(di->dev, "capacity=%d (%d)\n",
+ di->bat_cap.prev_percent,
+ di->bat_cap.cap_scale.scaled_cap);
+ }
power_supply_changed(&di->fg_psy);
if (di->flags.fully_charged && di->flags.force_full) {
dev_dbg(di->dev, "Battery full, notifying.\n");
@@ -1284,7 +1446,7 @@
switch (di->charge_state) {
case AB8500_FG_CHARGE_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_charging);
+ di->bm->fg_params->accu_charging);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
@@ -1296,7 +1458,7 @@
* Read the FG and calculate the new capacity
*/
mutex_lock(&di->cc_lock);
- if (!di->flags.conv_done) {
+ if (!di->flags.conv_done && !di->flags.force_full) {
/* Wasn't the CC IRQ that got us here */
mutex_unlock(&di->cc_lock);
dev_dbg(di->dev, "%s CC conv not done\n",
@@ -1346,8 +1508,8 @@
cap_permille = ab8500_fg_convert_mah_to_permille(di,
di->bat_cap.user_mah);
- lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10;
- upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10;
+ lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+ upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
if (lower < 0)
lower = 0;
@@ -1387,7 +1549,7 @@
case AB8500_FG_DISCHARGE_INIT:
/* We use the FG IRQ to work on */
di->init_cnt = 0;
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_INITMEASURING);
@@ -1400,18 +1562,17 @@
* samples to get an initial capacity.
* Then go to READOUT
*/
- sleep_time = di->bat->fg_params->init_timer;
+ sleep_time = di->bm->fg_params->init_timer;
/* Discard the first [x] seconds */
- if (di->init_cnt >
- di->bat->fg_params->init_discard_time) {
+ if (di->init_cnt > di->bm->fg_params->init_discard_time) {
ab8500_fg_calc_cap_discharge_voltage(di, true);
ab8500_fg_check_capacity_limits(di, true);
}
di->init_cnt += sleep_time;
- if (di->init_cnt > di->bat->fg_params->init_total_time)
+ if (di->init_cnt > di->bm->fg_params->init_total_time)
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT_INIT);
@@ -1426,7 +1587,7 @@
/* Intentional fallthrough */
case AB8500_FG_DISCHARGE_RECOVERY:
- sleep_time = di->bat->fg_params->recovery_sleep_timer;
+ sleep_time = di->bm->fg_params->recovery_sleep_timer;
/*
* We should check the power consumption
@@ -1438,9 +1599,9 @@
if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
if (di->recovery_cnt >
- di->bat->fg_params->recovery_total_time) {
+ di->bm->fg_params->recovery_total_time) {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1453,7 +1614,7 @@
di->recovery_cnt += sleep_time;
} else {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1462,7 +1623,7 @@
case AB8500_FG_DISCHARGE_READOUT_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1480,7 +1641,7 @@
if (di->recovery_needed) {
ab8500_fg_discharge_state_to(di,
- AB8500_FG_DISCHARGE_RECOVERY);
+ AB8500_FG_DISCHARGE_INIT_RECOVERY);
queue_delayed_work(di->fg_wq,
&di->fg_periodic_work, 0);
@@ -1509,9 +1670,9 @@
}
di->high_curr_cnt +=
- di->bat->fg_params->accu_high_curr;
+ di->bm->fg_params->accu_high_curr;
if (di->high_curr_cnt >
- di->bat->fg_params->high_curr_time)
+ di->bm->fg_params->high_curr_time)
di->recovery_needed = true;
ab8500_fg_calc_cap_discharge_fg(di);
@@ -1523,12 +1684,10 @@
case AB8500_FG_DISCHARGE_WAKEUP:
ab8500_fg_coulomb_counter(di, true);
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
-
ab8500_fg_calc_cap_discharge_voltage(di, true);
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1641,8 +1800,6 @@
fg_periodic_work.work);
if (di->init_capacity) {
- /* A dummy read that will return 0 */
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
/* Get an initial capacity calculation */
ab8500_fg_calc_cap_discharge_voltage(di, true);
ab8500_fg_check_capacity_limits(di, true);
@@ -1684,24 +1841,26 @@
* If we have had a battery over-voltage situation,
* check ovv-bit to see if it should be reset.
*/
- if (di->flags.bat_ovv) {
- ret = abx500_get_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_CH_STAT_REG,
- ®_value);
- if (ret < 0) {
- dev_err(di->dev, "%s ab8500 read failed\n", __func__);
- return;
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STAT_REG,
+ ®_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if ((reg_value & BATT_OVV) == BATT_OVV) {
+ if (!di->flags.bat_ovv) {
+ dev_dbg(di->dev, "Battery OVV\n");
+ di->flags.bat_ovv = true;
+ power_supply_changed(&di->fg_psy);
}
- if ((reg_value & BATT_OVV) != BATT_OVV) {
+ /* Not yet recovered from ovv, reschedule this test */
+ queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
+ HZ);
+ } else {
dev_dbg(di->dev, "Battery recovered from OVV\n");
di->flags.bat_ovv = false;
power_supply_changed(&di->fg_psy);
- return;
- }
-
- /* Not yet recovered from ovv, reschedule this test */
- queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
- round_jiffies(HZ));
}
}
@@ -1721,26 +1880,30 @@
vbat = ab8500_fg_bat_voltage(di);
/* Check if LOW_BAT still fulfilled */
- if (vbat < di->bat->fg_params->lowbat_threshold) {
- di->flags.low_bat = true;
- dev_warn(di->dev, "Battery voltage still LOW\n");
-
- /*
- * We need to re-schedule this check to be able to detect
- * if the voltage increases again during charging
- */
- queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
- round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ if (vbat < di->bm->fg_params->lowbat_threshold) {
+ /* Is it time to shut down? */
+ if (di->low_bat_cnt < 1) {
+ di->flags.low_bat = true;
+ dev_warn(di->dev, "Shut down pending...\n");
+ } else {
+ /*
+ * Else we need to re-schedule this check to be able to detect
+ * if the voltage increases again during charging or
+ * due to decreasing load.
+ */
+ di->low_bat_cnt--;
+ dev_warn(di->dev, "Battery voltage still LOW\n");
+ queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+ round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ }
} else {
- di->flags.low_bat = false;
+ di->flags.low_bat_delay = false;
+ di->low_bat_cnt = 10;
dev_warn(di->dev, "Battery voltage OK again\n");
}
/* This is needed to dispatch LOW_BAT */
ab8500_fg_check_capacity_limits(di, false);
-
- /* Set this flag to check if LOW_BAT IRQ still occurs */
- di->flags.low_bat_delay = false;
}
/**
@@ -1779,8 +1942,8 @@
int ret;
int new_val;
- sel0 = di->bat->fg_params->battok_falling_th_sel0;
- sel1 = di->bat->fg_params->battok_raising_th_sel1;
+ sel0 = di->bm->fg_params->battok_falling_th_sel0;
+ sel1 = di->bm->fg_params->battok_raising_th_sel1;
cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
@@ -1828,7 +1991,13 @@
static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
{
struct ab8500_fg *di = _di;
- complete(&di->ab8500_fg_complete);
+ if (!di->nbr_cceoc_irq_cnt) {
+ di->nbr_cceoc_irq_cnt++;
+ complete(&di->ab8500_fg_started);
+ } else {
+ di->nbr_cceoc_irq_cnt = 0;
+ complete(&di->ab8500_fg_complete);
+ }
return IRQ_HANDLED;
}
@@ -1875,8 +2044,6 @@
struct ab8500_fg *di = _di;
dev_dbg(di->dev, "Battery OVV\n");
- di->flags.bat_ovv = true;
- power_supply_changed(&di->fg_psy);
/* Schedule a new HW failure check */
queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
@@ -1895,6 +2062,7 @@
{
struct ab8500_fg *di = _di;
+ /* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
if (!di->flags.low_bat_delay) {
dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
di->flags.low_bat_delay = true;
@@ -1963,7 +2131,7 @@
di->bat_cap.max_mah);
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = ab8500_fg_convert_mah_to_uwh(di,
di->bat_cap.max_mah);
@@ -1978,21 +2146,23 @@
val->intval = di->bat_cap.max_mah;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = di->bat_cap.max_mah;
else
val->intval = di->bat_cap.prev_mah;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->bm->capacity_scaling)
+ val->intval = di->bat_cap.cap_scale.scaled_cap;
+ else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = 100;
else
val->intval = di->bat_cap.prev_percent;
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
else
@@ -2049,6 +2219,8 @@
break;
di->flags.charging = false;
di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
queue_work(di->fg_wq, &di->fg_work);
break;
case POWER_SUPPLY_STATUS_FULL:
@@ -2061,10 +2233,13 @@
queue_work(di->fg_wq, &di->fg_work);
break;
case POWER_SUPPLY_STATUS_CHARGING:
- if (di->flags.charging)
+ if (di->flags.charging &&
+ !di->flags.fully_charged)
break;
di->flags.charging = true;
di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
queue_work(di->fg_wq, &di->fg_work);
break;
};
@@ -2075,10 +2250,11 @@
case POWER_SUPPLY_PROP_TECHNOLOGY:
switch (ext->type) {
case POWER_SUPPLY_TYPE_BATTERY:
- if (!di->flags.batt_id_received) {
+ if (!di->flags.batt_id_received &&
+ di->bm->batt_id != BATTERY_UNKNOWN) {
const struct abx500_battery_type *b;
- b = &(di->bat->bat_type[di->bat->batt_id]);
+ b = &(di->bm->bat_type[di->bm->batt_id]);
di->flags.batt_id_received = true;
@@ -2104,8 +2280,8 @@
case POWER_SUPPLY_PROP_TEMP:
switch (ext->type) {
case POWER_SUPPLY_TYPE_BATTERY:
- if (di->flags.batt_id_received)
- di->bat_temp = ret.intval;
+ if (di->flags.batt_id_received)
+ di->bat_temp = ret.intval;
break;
default:
break;
@@ -2155,7 +2331,7 @@
AB8500_SYS_CTRL2_BLOCK,
AB8500_LOW_BAT_REG,
ab8500_volt_to_regval(
- di->bat->fg_params->lowbat_threshold) << 1 |
+ di->bm->fg_params->lowbat_threshold) << 1 |
LOW_BAT_ENABLE);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
@@ -2395,6 +2571,11 @@
struct ab8500_fg *di = platform_get_drvdata(pdev);
flush_delayed_work(&di->fg_periodic_work);
+ flush_work(&di->fg_work);
+ flush_work(&di->fg_acc_cur_work);
+ flush_delayed_work(&di->fg_reinit_work);
+ flush_delayed_work(&di->fg_low_bat_work);
+ flush_delayed_work(&di->fg_check_hw_failure_work);
/*
* If the FG is enabled we will disable it before going to suspend
@@ -2448,6 +2629,7 @@
static int ab8500_fg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_fg *di;
int i, irq;
int ret = 0;
@@ -2457,21 +2639,19 @@
dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_fg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
mutex_init(&di->cc_lock);
@@ -2491,11 +2671,11 @@
di->fg_psy.external_power_changed = ab8500_fg_external_power_changed;
di->bat_cap.max_mah_design = MILLI_TO_MICRO *
- di->bat->bat_type[di->bat->batt_id].charge_full_design;
+ di->bm->bat_type[di->bm->batt_id].charge_full_design;
di->bat_cap.max_mah = di->bat_cap.max_mah_design;
- di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage;
+ di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
di->init_capacity = true;
@@ -2531,6 +2711,12 @@
INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
ab8500_fg_check_hw_failure_work);
+ /* Reset battery low voltage flag */
+ di->flags.low_bat = false;
+
+ /* Initialize low battery counter */
+ di->low_bat_cnt = 10;
+
/* Initialize OVV, and other registers */
ret = ab8500_fg_init_hw_registers(di);
if (ret) {
@@ -2549,10 +2735,14 @@
goto free_inst_curr_wq;
}
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
- /* Initialize completion used to notify completion of inst current */
+ /*
+ * Initialize completion used to notify completion and start
+ * of inst current
+ */
+ init_completion(&di->ab8500_fg_started);
init_completion(&di->ab8500_fg_complete);
/* Register interrupts */
@@ -2572,6 +2762,7 @@
}
di->irq = platform_get_irq_byname(pdev, "CCEOC");
disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
platform_set_drvdata(pdev, di);
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 2970891..f043c08 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -33,9 +33,6 @@
/* End-of-charge criteria counter */
#define EOC_COND_CNT 10
-/* Recharge criteria counter */
-#define RCH_COND_CNT 3
-
#define to_abx500_chargalg_device_info(x) container_of((x), \
struct abx500_chargalg, chargalg_psy);
@@ -196,7 +193,6 @@
* @dev: pointer to the structure device
* @charge_status: battery operating status
* @eoc_cnt: counter used to determine end-of_charge
- * @rch_cnt: counter used to determine start of recharge
* @maintenance_chg: indicate if maintenance charge is active
* @t_hyst_norm temperature hysteresis when the temperature has been
* over or under normal limits
@@ -207,7 +203,7 @@
* @chg_info: information about connected charger types
* @batt_data: data of the battery
* @susp_status: current charger suspension status
- * @bat: pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
* @events: structure for information about events triggered
@@ -223,7 +219,6 @@
struct device *dev;
int charge_status;
int eoc_cnt;
- int rch_cnt;
bool maintenance_chg;
int t_hyst_norm;
int t_hyst_lowhigh;
@@ -232,7 +227,7 @@
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
struct ux500_charger *usb_chg;
@@ -367,13 +362,13 @@
case AC_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->main_safety_tmr_h * 3600 * HZ));
+ (di->bm->main_safety_tmr_h * 3600 * HZ));
break;
case USB_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->usb_safety_tmr_h * 3600 * HZ));
+ (di->bm->usb_safety_tmr_h * 3600 * HZ));
break;
default:
@@ -450,8 +445,18 @@
{
/* Check if charger exists and kick watchdog if charging */
if (di->ac_chg && di->ac_chg->ops.kick_wd &&
- di->chg_info.online_chg & AC_CHG)
+ di->chg_info.online_chg & AC_CHG) {
+ /*
+ * If AB charger watchdog expired, pm2xxx charging
+ * gets disabled. To be safe, kick both AB charger watchdog
+ * and pm2xxx watchdog.
+ */
+ if (di->ac_chg->external &&
+ di->usb_chg && di->usb_chg->ops.kick_wd)
+ di->usb_chg->ops.kick_wd(di->usb_chg);
+
return di->ac_chg->ops.kick_wd(di->ac_chg);
+ }
else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
di->chg_info.online_chg & USB_CHG)
return di->usb_chg->ops.kick_wd(di->usb_chg);
@@ -608,6 +613,8 @@
static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
int vset, int iset)
{
+ bool start_chargalg_wd = true;
+
switch (di->chg_info.charger_type) {
case AC_CHG:
dev_dbg(di->dev,
@@ -625,8 +632,12 @@
default:
dev_err(di->dev, "Unknown charger to charge from\n");
+ start_chargalg_wd = false;
break;
}
+
+ if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work))
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
}
/**
@@ -638,32 +649,32 @@
*/
static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
{
- if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
- di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
+ if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) &&
+ di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) {
/* Temp OK! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
di->t_hyst_lowhigh = 0;
} else {
- if (((di->batt_data.temp >= di->bat->temp_high) &&
+ if (((di->batt_data.temp >= di->bm->temp_high) &&
(di->batt_data.temp <
- (di->bat->temp_over - di->t_hyst_lowhigh))) ||
+ (di->bm->temp_over - di->t_hyst_lowhigh))) ||
((di->batt_data.temp >
- (di->bat->temp_under + di->t_hyst_lowhigh)) &&
- (di->batt_data.temp <= di->bat->temp_low))) {
+ (di->bm->temp_under + di->t_hyst_lowhigh)) &&
+ (di->batt_data.temp <= di->bm->temp_low))) {
/* TEMP minor!!!!! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = true;
- di->t_hyst_norm = di->bat->temp_hysteresis;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
di->t_hyst_lowhigh = 0;
- } else if (di->batt_data.temp <= di->bat->temp_under ||
- di->batt_data.temp >= di->bat->temp_over) {
+ } else if (di->batt_data.temp <= di->bm->temp_under ||
+ di->batt_data.temp >= di->bm->temp_over) {
/* TEMP major!!!!! */
di->events.btemp_underover = true;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
- di->t_hyst_lowhigh = di->bat->temp_hysteresis;
+ di->t_hyst_lowhigh = di->bm->temp_hysteresis;
} else {
/* Within hysteresis */
dev_dbg(di->dev, "Within hysteresis limit temp: %d "
@@ -682,12 +693,12 @@
*/
static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
{
- if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
+ if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max)
di->chg_info.usb_chg_ok = false;
else
di->chg_info.usb_chg_ok = true;
- if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
+ if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max)
di->chg_info.ac_chg_ok = false;
else
di->chg_info.ac_chg_ok = true;
@@ -707,10 +718,10 @@
if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
di->charge_state == STATE_NORMAL &&
!di->maintenance_chg && (di->batt_data.volt >=
- di->bat->bat_type[di->bat->batt_id].termination_vol ||
+ di->bm->bat_type[di->bm->batt_id].termination_vol ||
di->events.usb_cv_active || di->events.ac_cv_active) &&
di->batt_data.avg_curr <
- di->bat->bat_type[di->bat->batt_id].termination_curr &&
+ di->bm->bat_type[di->bm->batt_id].termination_curr &&
di->batt_data.avg_curr > 0) {
if (++di->eoc_cnt >= EOC_COND_CNT) {
di->eoc_cnt = 0;
@@ -733,12 +744,12 @@
static void init_maxim_chg_curr(struct abx500_chargalg *di)
{
di->ccm.original_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
di->ccm.current_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
- di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
- di->ccm.max_current = di->bat->maxi->chg_curr;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
+ di->ccm.test_delta_i = di->bm->maxi->charger_curr_step;
+ di->ccm.max_current = di->bm->maxi->chg_curr;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.level = 0;
}
@@ -755,7 +766,7 @@
{
int delta_i;
- if (!di->bat->maxi->ena_maxi)
+ if (!di->bm->maxi->ena_maxi)
return MAXIM_RET_NOACTION;
delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
@@ -766,7 +777,7 @@
if (di->ccm.wait_cnt == 0) {
dev_dbg(di->dev, "lowering current\n");
di->ccm.wait_cnt++;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.max_current =
di->ccm.current_iset - di->ccm.test_delta_i;
di->ccm.current_iset = di->ccm.max_current;
@@ -791,7 +802,7 @@
if (di->ccm.current_iset == di->ccm.original_iset)
return MAXIM_RET_NOACTION;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset = di->ccm.original_iset;
di->ccm.level = 0;
@@ -803,7 +814,7 @@
di->ccm.max_current) {
if (di->ccm.condition_cnt-- == 0) {
/* Increse the iset with cco.test_delta_i */
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset += di->ccm.test_delta_i;
di->ccm.level++;
dev_dbg(di->dev, " Maximization needed, increase"
@@ -818,7 +829,7 @@
return MAXIM_RET_NOACTION;
}
} else {
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
return MAXIM_RET_NOACTION;
}
}
@@ -838,7 +849,7 @@
break;
case MAXIM_RET_IBAT_TOO_HIGH:
result = abx500_chargalg_update_chg_curr(di,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
if (result)
dev_err(di->dev, "failed to set chg curr\n");
break;
@@ -858,6 +869,7 @@
union power_supply_propval ret;
int i, j;
bool psy_found = false;
+ bool capacity_updated = false;
psy = (struct power_supply *)data;
ext = dev_get_drvdata(dev);
@@ -870,6 +882,16 @@
if (!psy_found)
return 0;
+ /*
+ * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its
+ * property because of handling that sysfs entry on its own, this is
+ * the place to get the battery capacity.
+ */
+ if (!ext->get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) {
+ di->batt_data.percent = ret.intval;
+ capacity_updated = true;
+ }
+
/* Go through all properties for the psy */
for (j = 0; j < ext->num_properties; j++) {
enum power_supply_property prop;
@@ -1154,7 +1176,8 @@
}
break;
case POWER_SUPPLY_PROP_CAPACITY:
- di->batt_data.percent = ret.intval;
+ if (!capacity_updated)
+ di->batt_data.percent = ret.intval;
break;
default:
break;
@@ -1210,7 +1233,7 @@
* this way
*/
if (!charger_status ||
- (di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
+ (di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
if (di->charge_state != STATE_HANDHELD) {
di->events.safety_timer_expired = false;
abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
@@ -1394,8 +1417,8 @@
case STATE_NORMAL_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
abx500_chargalg_state_to(di, STATE_NORMAL);
abx500_chargalg_start_safety_timer(di);
abx500_chargalg_stop_maintenance_timer(di);
@@ -1411,7 +1434,7 @@
handle_maxim_chg_curr(di);
if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
di->maintenance_chg) {
- if (di->bat->no_maintenance)
+ if (di->bm->no_maintenance)
abx500_chargalg_state_to(di,
STATE_WAIT_FOR_RECHARGE_INIT);
else
@@ -1424,28 +1447,25 @@
case STATE_WAIT_FOR_RECHARGE_INIT:
abx500_chargalg_hold_charging(di);
abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
- di->rch_cnt = RCH_COND_CNT;
/* Intentional fallthrough */
case STATE_WAIT_FOR_RECHARGE:
- if (di->batt_data.volt <=
- di->bat->bat_type[di->bat->batt_id].recharge_vol) {
- if (di->rch_cnt-- == 0)
- abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
- } else
- di->rch_cnt = RCH_COND_CNT;
+ if (di->batt_data.percent <=
+ di->bm->bat_type[di->bm->batt_id].
+ recharge_cap)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
break;
case STATE_MAINTENANCE_A_INIT:
abx500_chargalg_stop_safety_timer(di);
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1459,13 +1479,13 @@
case STATE_MAINTENANCE_B_INIT:
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1479,10 +1499,10 @@
case STATE_TEMP_LOWHIGH_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].low_high_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].low_high_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_cur_lvl);
abx500_chargalg_stop_maintenance_timer(di);
di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
@@ -1543,11 +1563,11 @@
if (di->chg_info.conn_chg)
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_charging * HZ);
+ di->bm->interval_charging * HZ);
else
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_not_charging * HZ);
+ di->bm->interval_not_charging * HZ);
}
/**
@@ -1614,10 +1634,13 @@
if (di->events.batt_ovv) {
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else if (di->events.btemp_underover) {
- if (di->batt_data.temp <= di->bat->temp_under)
+ if (di->batt_data.temp <= di->bm->temp_under)
val->intval = POWER_SUPPLY_HEALTH_COLD;
else
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
+ di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
} else {
val->intval = POWER_SUPPLY_HEALTH_GOOD;
}
@@ -1631,6 +1654,25 @@
/* Exposure to the sysfs interface */
/**
+ * abx500_chargalg_sysfs_show() - sysfs show operations
+ * @kobj: pointer to the struct kobject
+ * @attr: pointer to the struct attribute
+ * @buf: buffer that holds the parameter to send to userspace
+ *
+ * Returns a buffer to be displayed in user space
+ */
+static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ return sprintf(buf, "%d\n",
+ di->susp_status.ac_suspended &&
+ di->susp_status.usb_suspended);
+}
+
+/**
* abx500_chargalg_sysfs_charger() - sysfs store operations
* @kobj: pointer to the struct kobject
* @attr: pointer to the struct attribute
@@ -1698,7 +1740,7 @@
static struct attribute abx500_chargalg_en_charger = \
{
.name = "chargalg",
- .mode = S_IWUGO,
+ .mode = S_IRUGO | S_IWUSR,
};
static struct attribute *abx500_chargalg_chg[] = {
@@ -1707,6 +1749,7 @@
};
static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
+ .show = abx500_chargalg_sysfs_show,
.store = abx500_chargalg_sysfs_charger,
};
@@ -1806,6 +1849,7 @@
static int abx500_chargalg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct abx500_chargalg *di;
int ret = 0;
@@ -1814,21 +1858,19 @@
dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get device struct */
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
index ee842b3..ca91396 100644
--- a/drivers/power/bq2415x_charger.c
+++ b/drivers/power/bq2415x_charger.c
@@ -28,7 +28,6 @@
* http://www.ti.com/product/bq24155
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/param.h>
@@ -734,12 +733,10 @@
int charger = 0;
int boost = 0;
- if (mode == BQ2415X_MODE_HOST_CHARGER ||
- mode == BQ2415X_MODE_DEDICATED_CHARGER)
- charger = 1;
-
if (mode == BQ2415X_MODE_BOOST)
boost = 1;
+ else if (mode != BQ2415X_MODE_OFF)
+ charger = 1;
if (!charger)
ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
@@ -751,6 +748,10 @@
return ret;
switch (mode) {
+ case BQ2415X_MODE_OFF:
+ dev_dbg(bq->dev, "changing mode to: Offline\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
case BQ2415X_MODE_NONE:
dev_dbg(bq->dev, "changing mode to: N/A\n");
ret = bq2415x_set_current_limit(bq, 100);
@@ -843,7 +844,7 @@
dev_err(bq->dev, "%s\n", msg);
if (bq->automode > 0)
bq->automode = 0;
- bq2415x_set_mode(bq, BQ2415X_MODE_NONE);
+ bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
bq2415x_set_autotimer(bq, 0);
}
@@ -1136,6 +1137,10 @@
return -ENOSYS;
bq->automode = 1;
mode = bq->reported_mode;
+ } else if (strncmp(buf, "off", 3) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_OFF;
} else if (strncmp(buf, "none", 4) == 0) {
if (bq->automode > 0)
bq->automode = 0;
@@ -1183,6 +1188,9 @@
ret += sprintf(buf+ret, "auto (");
switch (bq->mode) {
+ case BQ2415X_MODE_OFF:
+ ret += sprintf(buf+ret, "off");
+ break;
case BQ2415X_MODE_NONE:
ret += sprintf(buf+ret, "none");
break;
@@ -1217,6 +1225,8 @@
return -EINVAL;
switch (bq->reported_mode) {
+ case BQ2415X_MODE_OFF:
+ return sprintf(buf, "off\n");
case BQ2415X_MODE_NONE:
return sprintf(buf, "none\n");
case BQ2415X_MODE_HOST_CHARGER:
@@ -1523,7 +1533,7 @@
goto error_1;
}
- bq = kzalloc(sizeof(*bq), GFP_KERNEL);
+ bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
if (!bq) {
dev_err(&client->dev, "failed to allocate device data\n");
ret = -ENOMEM;
@@ -1536,8 +1546,8 @@
bq->dev = &client->dev;
bq->chip = id->driver_data;
bq->name = name;
- bq->mode = BQ2415X_MODE_NONE;
- bq->reported_mode = BQ2415X_MODE_NONE;
+ bq->mode = BQ2415X_MODE_OFF;
+ bq->reported_mode = BQ2415X_MODE_OFF;
bq->autotimer = 0;
bq->automode = 0;
@@ -1549,19 +1559,19 @@
ret = bq2415x_power_supply_init(bq);
if (ret) {
dev_err(bq->dev, "failed to register power supply: %d\n", ret);
- goto error_3;
+ goto error_2;
}
ret = bq2415x_sysfs_init(bq);
if (ret) {
dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret);
- goto error_4;
+ goto error_3;
}
ret = bq2415x_set_defaults(bq);
if (ret) {
dev_err(bq->dev, "failed to set default values: %d\n", ret);
- goto error_5;
+ goto error_4;
}
if (bq->init_data.set_mode_hook) {
@@ -1585,12 +1595,10 @@
dev_info(bq->dev, "driver registered\n");
return 0;
-error_5:
- bq2415x_sysfs_exit(bq);
error_4:
- bq2415x_power_supply_exit(bq);
+ bq2415x_sysfs_exit(bq);
error_3:
- kfree(bq);
+ bq2415x_power_supply_exit(bq);
error_2:
kfree(name);
error_1:
@@ -1622,7 +1630,6 @@
dev_info(bq->dev, "driver unregistered\n");
kfree(bq->name);
- kfree(bq);
return 0;
}
@@ -1652,18 +1659,7 @@
.remove = bq2415x_remove,
.id_table = bq2415x_i2c_id_table,
};
-
-static int __init bq2415x_init(void)
-{
- return i2c_add_driver(&bq2415x_driver);
-}
-module_init(bq2415x_init);
-
-static void __exit bq2415x_exit(void)
-{
- i2c_del_driver(&bq2415x_driver);
-}
-module_exit(bq2415x_exit);
+module_i2c_driver(bq2415x_driver);
MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
MODULE_DESCRIPTION("bq2415x charger driver");
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 36b34ef..8ccf5d7 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -299,7 +299,7 @@
}
/*
- * Return the battery temperature in tenths of degree Celsius
+ * Return the battery temperature in tenths of degree Kelvin
* Or < 0 if something fails.
*/
static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di)
@@ -312,10 +312,8 @@
return temp;
}
- if (bq27xxx_is_chip_version_higher(di))
- temp -= 2731;
- else
- temp = ((temp * 5) - 5463) / 2;
+ if (!bq27xxx_is_chip_version_higher(di))
+ temp = 5 * temp / 2;
return temp;
}
@@ -448,7 +446,6 @@
cache.temperature = bq27x00_battery_read_temperature(di);
if (!is_bq27425)
cache.cycle_count = bq27x00_battery_read_cyct(di);
- cache.cycle_count = bq27x00_battery_read_cyct(di);
cache.power_avg =
bq27x00_battery_read_pwr_avg(di, BQ27x00_POWER_AVG);
@@ -642,6 +639,8 @@
break;
case POWER_SUPPLY_PROP_TEMP:
ret = bq27x00_simple_value(di->cache.temperature, val);
+ if (ret == 0)
+ val->intval -= 2731;
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
ret = bq27x00_simple_value(di->cache.time_to_empty, val);
@@ -696,7 +695,6 @@
int ret;
di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- di->chip = BQ27425;
if (di->chip == BQ27425) {
di->bat.properties = bq27425_battery_props;
di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props);
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 6ba047f..8acc3f8 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -669,15 +669,21 @@
WARN(cm_wq == NULL, "charger-manager: workqueue not initialized"
". try it later. %s\n", __func__);
+ /*
+ * Use mod_delayed_work() iff the next polling interval should
+ * occur before the currently scheduled one. If @cm_monitor_work
+ * isn't active, the end result is the same, so no need to worry
+ * about stale @next_polling.
+ */
_next_polling = jiffies + polling_jiffy;
- if (!delayed_work_pending(&cm_monitor_work) ||
- (delayed_work_pending(&cm_monitor_work) &&
- time_after(next_polling, _next_polling))) {
- next_polling = jiffies + polling_jiffy;
+ if (time_before(_next_polling, next_polling)) {
mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy);
+ next_polling = _next_polling;
+ } else {
+ if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy))
+ next_polling = _next_polling;
}
-
out:
mutex_unlock(&cm_list_mtx);
}
@@ -751,8 +757,7 @@
if (cm_suspended)
device_set_wakeup_capable(cm->dev, true);
- if (!delayed_work_pending(&cm_monitor_work) &&
- is_polling_required(cm) && cm->desc->polling_interval_ms)
+ if (is_polling_required(cm) && cm->desc->polling_interval_ms)
schedule_work(&setup_polling);
uevent_notify(cm, default_event_names[type]);
}
@@ -1170,8 +1175,7 @@
* when charger cable is attached.
*/
if (cable->attached && is_polling_required(cable->cm)) {
- if (work_pending(&setup_polling))
- cancel_work_sync(&setup_polling);
+ cancel_work_sync(&setup_polling);
schedule_work(&setup_polling);
}
@@ -1215,6 +1219,55 @@
return ret;
}
+/**
+ * charger_manager_register_extcon - Register extcon device to recevie state
+ * of charger cable.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function support EXTCON(External Connector) subsystem to detect the
+ * state of charger cables for enabling or disabling charger(regulator) and
+ * select the charger cable for charging among a number of external cable
+ * according to policy of H/W board.
+ */
+static int charger_manager_register_extcon(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int ret = 0;
+ int i;
+ int j;
+
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ charger->consumer = regulator_get(cm->dev,
+ charger->regulator_name);
+ if (charger->consumer == NULL) {
+ dev_err(cm->dev, "Cannot find charger(%s)n",
+ charger->regulator_name);
+ ret = -EINVAL;
+ goto err;
+ }
+ charger->cm = cm;
+
+ for (j = 0; j < charger->num_cables; j++) {
+ struct charger_cable *cable = &charger->cables[j];
+
+ ret = charger_extcon_init(cm, cable);
+ if (ret < 0) {
+ dev_err(cm->dev, "Cannot initialize charger(%s)n",
+ charger->regulator_name);
+ goto err;
+ }
+ cable->charger = charger;
+ cable->cm = cm;
+ }
+ }
+
+err:
+ return ret;
+}
+
/* help function of sysfs node to control charger(regulator) */
static ssize_t charger_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -1274,7 +1327,7 @@
for (i = 0; i < desc->num_charger_regulators; i++) {
if (&desc->charger_regulators[i] != charger &&
- !desc->charger_regulators[i].externally_control) {
+ !desc->charger_regulators[i].externally_control) {
/*
* At least, one charger is controlled by
* charger-manager
@@ -1303,13 +1356,107 @@
return count;
}
+/**
+ * charger_manager_register_sysfs - Register sysfs entry for each charger
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function add sysfs entry for charger(regulator) to control charger from
+ * user-space. If some development board use one more chargers for charging
+ * but only need one charger on specific case which is dependent on user
+ * scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/
+ * class/power_supply/battery/charger.[index]/externally_control'. For example,
+ * if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/
+ * externally_control, this charger isn't controlled from charger-manager and
+ * always stay off state of regulator.
+ */
+static int charger_manager_register_sysfs(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int chargers_externally_control = 1;
+ char buf[11];
+ char *str;
+ int ret = 0;
+ int i;
+
+ /* Create sysfs entry to control charger(regulator) */
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ snprintf(buf, 10, "charger.%d", i);
+ str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
+ if (!str) {
+ dev_err(cm->dev, "Cannot allocate memory: %s\n",
+ charger->regulator_name);
+ ret = -ENOMEM;
+ goto err;
+ }
+ strcpy(str, buf);
+
+ charger->attrs[0] = &charger->attr_name.attr;
+ charger->attrs[1] = &charger->attr_state.attr;
+ charger->attrs[2] = &charger->attr_externally_control.attr;
+ charger->attrs[3] = NULL;
+ charger->attr_g.name = str;
+ charger->attr_g.attrs = charger->attrs;
+
+ sysfs_attr_init(&charger->attr_name.attr);
+ charger->attr_name.attr.name = "name";
+ charger->attr_name.attr.mode = 0444;
+ charger->attr_name.show = charger_name_show;
+
+ sysfs_attr_init(&charger->attr_state.attr);
+ charger->attr_state.attr.name = "state";
+ charger->attr_state.attr.mode = 0444;
+ charger->attr_state.show = charger_state_show;
+
+ sysfs_attr_init(&charger->attr_externally_control.attr);
+ charger->attr_externally_control.attr.name
+ = "externally_control";
+ charger->attr_externally_control.attr.mode = 0644;
+ charger->attr_externally_control.show
+ = charger_externally_control_show;
+ charger->attr_externally_control.store
+ = charger_externally_control_store;
+
+ if (!desc->charger_regulators[i].externally_control ||
+ !chargers_externally_control)
+ chargers_externally_control = 0;
+
+ dev_info(cm->dev, "'%s' regulator's externally_control"
+ "is %d\n", charger->regulator_name,
+ charger->externally_control);
+
+ ret = sysfs_create_group(&cm->charger_psy.dev->kobj,
+ &charger->attr_g);
+ if (ret < 0) {
+ dev_err(cm->dev, "Cannot create sysfs entry"
+ "of %s regulator\n",
+ charger->regulator_name);
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (chargers_externally_control) {
+ dev_err(cm->dev, "Cannot register regulator because "
+ "charger-manager must need at least "
+ "one charger for charging battery\n");
+
+ ret = -EINVAL;
+ goto err;
+ }
+
+err:
+ return ret;
+}
+
static int charger_manager_probe(struct platform_device *pdev)
{
struct charger_desc *desc = dev_get_platdata(&pdev->dev);
struct charger_manager *cm;
int ret = 0, i = 0;
int j = 0;
- int chargers_externally_control = 1;
union power_supply_propval val;
if (g_desc && !rtc_dev && g_desc->rtc_name) {
@@ -1440,11 +1587,10 @@
memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default));
- if (!desc->psy_name) {
+ if (!desc->psy_name)
strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
- } else {
+ else
strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
- }
cm->charger_psy.name = cm->psy_name_buf;
/* Allocate for psy properties because they may vary */
@@ -1496,105 +1642,19 @@
goto err_register;
}
- for (i = 0 ; i < desc->num_charger_regulators ; i++) {
- struct charger_regulator *charger
- = &desc->charger_regulators[i];
- char buf[11];
- char *str;
-
- charger->consumer = regulator_get(&pdev->dev,
- charger->regulator_name);
- if (charger->consumer == NULL) {
- dev_err(&pdev->dev, "Cannot find charger(%s)n",
- charger->regulator_name);
- ret = -EINVAL;
- goto err_chg_get;
- }
- charger->cm = cm;
-
- for (j = 0 ; j < charger->num_cables ; j++) {
- struct charger_cable *cable = &charger->cables[j];
-
- ret = charger_extcon_init(cm, cable);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot find charger(%s)n",
- charger->regulator_name);
- goto err_extcon;
- }
- cable->charger = charger;
- cable->cm = cm;
- }
-
- /* Create sysfs entry to control charger(regulator) */
- snprintf(buf, 10, "charger.%d", i);
- str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
- if (!str) {
- for (i--; i >= 0; i--) {
- charger = &desc->charger_regulators[i];
- kfree(charger->attr_g.name);
- }
- ret = -ENOMEM;
-
- goto err_extcon;
- }
- strcpy(str, buf);
-
- charger->attrs[0] = &charger->attr_name.attr;
- charger->attrs[1] = &charger->attr_state.attr;
- charger->attrs[2] = &charger->attr_externally_control.attr;
- charger->attrs[3] = NULL;
- charger->attr_g.name = str;
- charger->attr_g.attrs = charger->attrs;
-
- sysfs_attr_init(&charger->attr_name.attr);
- charger->attr_name.attr.name = "name";
- charger->attr_name.attr.mode = 0444;
- charger->attr_name.show = charger_name_show;
-
- sysfs_attr_init(&charger->attr_state.attr);
- charger->attr_state.attr.name = "state";
- charger->attr_state.attr.mode = 0444;
- charger->attr_state.show = charger_state_show;
-
- sysfs_attr_init(&charger->attr_externally_control.attr);
- charger->attr_externally_control.attr.name
- = "externally_control";
- charger->attr_externally_control.attr.mode = 0644;
- charger->attr_externally_control.show
- = charger_externally_control_show;
- charger->attr_externally_control.store
- = charger_externally_control_store;
-
- if (!desc->charger_regulators[i].externally_control ||
- !chargers_externally_control) {
- chargers_externally_control = 0;
- }
- dev_info(&pdev->dev, "'%s' regulator's externally_control"
- "is %d\n", charger->regulator_name,
- charger->externally_control);
-
- ret = sysfs_create_group(&cm->charger_psy.dev->kobj,
- &charger->attr_g);
- if (ret < 0) {
- dev_info(&pdev->dev, "Cannot create sysfs entry"
- "of %s regulator\n",
- charger->regulator_name);
- }
+ /* Register extcon device for charger cable */
+ ret = charger_manager_register_extcon(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot initialize extcon device\n");
+ goto err_reg_extcon;
}
- if (chargers_externally_control) {
- dev_err(&pdev->dev, "Cannot register regulator because "
- "charger-manager must need at least "
- "one charger for charging battery\n");
-
- ret = -EINVAL;
- goto err_chg_enable;
- }
-
- ret = try_charger_enable(cm, true);
- if (ret) {
- dev_err(&pdev->dev, "Cannot enable charger regulators\n");
- goto err_chg_enable;
+ /* Register sysfs entry for charger(regulator) */
+ ret = charger_manager_register_sysfs(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Cannot initialize sysfs entry of regulator\n");
+ goto err_reg_sysfs;
}
/* Add to the list */
@@ -1613,27 +1673,28 @@
return 0;
-err_chg_enable:
+err_reg_sysfs:
for (i = 0; i < desc->num_charger_regulators; i++) {
struct charger_regulator *charger;
charger = &desc->charger_regulators[i];
sysfs_remove_group(&cm->charger_psy.dev->kobj,
&charger->attr_g);
+
kfree(charger->attr_g.name);
}
-err_extcon:
- for (i = 0 ; i < desc->num_charger_regulators ; i++) {
- struct charger_regulator *charger
- = &desc->charger_regulators[i];
- for (j = 0 ; j < charger->num_cables ; j++) {
+err_reg_extcon:
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ struct charger_regulator *charger;
+
+ charger = &desc->charger_regulators[i];
+ for (j = 0; j < charger->num_cables; j++) {
struct charger_cable *cable = &charger->cables[j];
extcon_unregister_interest(&cable->extcon_dev);
}
- }
-err_chg_get:
- for (i = 0 ; i < desc->num_charger_regulators ; i++)
+
regulator_put(desc->charger_regulators[i].consumer);
+ }
power_supply_unregister(&cm->charger_psy);
err_register:
@@ -1661,10 +1722,8 @@
list_del(&cm->entry);
mutex_unlock(&cm_list_mtx);
- if (work_pending(&setup_polling))
- cancel_work_sync(&setup_polling);
- if (delayed_work_pending(&cm_monitor_work))
- cancel_delayed_work_sync(&cm_monitor_work);
+ cancel_work_sync(&setup_polling);
+ cancel_delayed_work_sync(&cm_monitor_work);
for (i = 0 ; i < desc->num_charger_regulators ; i++) {
struct charger_regulator *charger
@@ -1733,8 +1792,7 @@
cm_suspended = true;
}
- if (delayed_work_pending(&cm->fullbatt_vchk_work))
- cancel_delayed_work(&cm->fullbatt_vchk_work);
+ cancel_delayed_work(&cm->fullbatt_vchk_work);
cm->status_save_ext_pwr_inserted = is_ext_pwr_online(cm);
cm->status_save_batt = is_batt_present(cm);
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index 94762e6..e8c5a39 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/notifier.h>
#define DA9030_FAULT_LOG 0x0a
#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7)
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
index 3c5c2e4..08193fe 100644
--- a/drivers/power/da9052-battery.c
+++ b/drivers/power/da9052-battery.c
@@ -337,7 +337,7 @@
if (adc_temp > vc_tbl_ref[DA9052_VC_TBL_REF_SZ - 1])
return DA9052_VC_TBL_REF_SZ - 1;
- for (i = 0; i < DA9052_VC_TBL_REF_SZ; i++) {
+ for (i = 0; i < DA9052_VC_TBL_REF_SZ - 1; i++) {
if ((adc_temp > vc_tbl_ref[i]) &&
(adc_temp <= DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1])))
return i;
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 2fa9b6b..e7301b3 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -7,6 +7,8 @@
*
* DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
*
+ * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -19,6 +21,7 @@
#include <linux/errno.h>
#include <linux/swab.h>
#include <linux/i2c.h>
+#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
@@ -40,6 +43,8 @@
#define DS2786_CURRENT_UNITS 25
+#define DS278x_DELAY 1000
+
struct ds278x_info;
struct ds278x_battery_ops {
@@ -54,8 +59,11 @@
struct i2c_client *client;
struct power_supply battery;
struct ds278x_battery_ops *ops;
+ struct delayed_work bat_work;
int id;
int rsns;
+ int capacity;
+ int status; /* State Of Charge */
};
static DEFINE_IDR(battery_id);
@@ -220,6 +228,8 @@
if (err)
return err;
+ info->capacity = capacity;
+
if (capacity == 100)
*status = POWER_SUPPLY_STATUS_FULL;
else if (current_uA == 0)
@@ -267,6 +277,27 @@
return ret;
}
+static void ds278x_bat_update(struct ds278x_info *info)
+{
+ int old_status = info->status;
+ int old_capacity = info->capacity;
+
+ ds278x_get_status(info, &info->status);
+
+ if ((old_status != info->status) || (old_capacity != info->capacity))
+ power_supply_changed(&info->battery);
+}
+
+static void ds278x_bat_work(struct work_struct *work)
+{
+ struct ds278x_info *info;
+
+ info = container_of(work, struct ds278x_info, bat_work.work);
+ ds278x_bat_update(info);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+}
+
static enum power_supply_property ds278x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CAPACITY,
@@ -295,10 +326,39 @@
idr_remove(&battery_id, info->id);
mutex_unlock(&battery_lock);
+ cancel_delayed_work(&info->bat_work);
+
kfree(info);
return 0;
}
+#ifdef CONFIG_PM
+
+static int ds278x_suspend(struct i2c_client *client,
+ pm_message_t state)
+{
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&info->bat_work);
+ return 0;
+}
+
+static int ds278x_resume(struct i2c_client *client)
+{
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+ return 0;
+}
+
+#else
+
+#define ds278x_suspend NULL
+#define ds278x_resume NULL
+
+#endif /* CONFIG_PM */
+
+
enum ds278x_num_id {
DS2782 = 0,
DS2786,
@@ -368,10 +428,17 @@
info->ops = &ds278x_ops[id->driver_data];
ds278x_power_supply_init(&info->battery);
+ info->capacity = 100;
+ info->status = POWER_SUPPLY_STATUS_FULL;
+
+ INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
+
ret = power_supply_register(&client->dev, &info->battery);
if (ret) {
dev_err(&client->dev, "failed to register battery\n");
goto fail_register;
+ } else {
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
}
return 0;
@@ -401,6 +468,8 @@
},
.probe = ds278x_battery_probe,
.remove = ds278x_battery_remove,
+ .suspend = ds278x_suspend,
+ .resume = ds278x_resume,
.id_table = ds278x_id,
};
module_i2c_driver(ds278x_battery_driver);
diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/generic-adc-battery.c
index 32ce17e..836816b 100644
--- a/drivers/power/generic-adc-battery.c
+++ b/drivers/power/generic-adc-battery.c
@@ -263,9 +263,6 @@
psy->external_power_changed = gab_ext_power_changed;
adc_bat->pdata = pdata;
- /* calculate the total number of channels */
- chan = ARRAY_SIZE(gab_chan_name);
-
/*
* copying the static properties and allocating extra memory for holding
* the extra configurable properties received from platform data.
@@ -291,6 +288,7 @@
gab_chan_name[chan]);
if (IS_ERR(adc_bat->channel[chan])) {
ret = PTR_ERR(adc_bat->channel[chan]);
+ adc_bat->channel[chan] = NULL;
} else {
/* copying properties for supported channels only */
memcpy(properties + sizeof(*(psy->properties)) * index,
@@ -344,8 +342,10 @@
gpio_req_fail:
power_supply_unregister(psy);
err_reg_fail:
- for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++)
- iio_channel_release(adc_bat->channel[chan]);
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
second_mem_fail:
kfree(psy->properties);
first_mem_fail:
@@ -365,8 +365,10 @@
gpio_free(pdata->gpio_charge_finished);
}
- for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++)
- iio_channel_release(adc_bat->channel[chan]);
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
kfree(adc_bat->psy.properties);
cancel_delayed_work(&adc_bat->bat_work);
diff --git a/drivers/power/goldfish_battery.c b/drivers/power/goldfish_battery.c
new file mode 100644
index 0000000..c10f460
--- /dev/null
+++ b/drivers/power/goldfish_battery.c
@@ -0,0 +1,236 @@
+/*
+ * Power supply driver for the goldfish emulator
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+struct goldfish_battery_data {
+ void __iomem *reg_base;
+ int irq;
+ spinlock_t lock;
+
+ struct power_supply battery;
+ struct power_supply ac;
+};
+
+#define GOLDFISH_BATTERY_READ(data, addr) \
+ (readl(data->reg_base + addr))
+#define GOLDFISH_BATTERY_WRITE(data, addr, x) \
+ (writel(x, data->reg_base + addr))
+
+/*
+ * Temporary variable used between goldfish_battery_probe() and
+ * goldfish_battery_open().
+ */
+static struct goldfish_battery_data *battery_data;
+
+enum {
+ /* status register */
+ BATTERY_INT_STATUS = 0x00,
+ /* set this to enable IRQ */
+ BATTERY_INT_ENABLE = 0x04,
+
+ BATTERY_AC_ONLINE = 0x08,
+ BATTERY_STATUS = 0x0C,
+ BATTERY_HEALTH = 0x10,
+ BATTERY_PRESENT = 0x14,
+ BATTERY_CAPACITY = 0x18,
+
+ BATTERY_STATUS_CHANGED = 1U << 0,
+ AC_STATUS_CHANGED = 1U << 1,
+ BATTERY_INT_MASK = BATTERY_STATUS_CHANGED | AC_STATUS_CHANGED,
+};
+
+
+static int goldfish_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = container_of(psy,
+ struct goldfish_battery_data, ac);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_AC_ONLINE);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int goldfish_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = container_of(psy,
+ struct goldfish_battery_data, battery);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_STATUS);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_HEALTH);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CAPACITY);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property goldfish_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static enum power_supply_property goldfish_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static irqreturn_t goldfish_battery_interrupt(int irq, void *dev_id)
+{
+ unsigned long irq_flags;
+ struct goldfish_battery_data *data = dev_id;
+ uint32_t status;
+
+ spin_lock_irqsave(&data->lock, irq_flags);
+
+ /* read status flags, which will clear the interrupt */
+ status = GOLDFISH_BATTERY_READ(data, BATTERY_INT_STATUS);
+ status &= BATTERY_INT_MASK;
+
+ if (status & BATTERY_STATUS_CHANGED)
+ power_supply_changed(&data->battery);
+ if (status & AC_STATUS_CHANGED)
+ power_supply_changed(&data->ac);
+
+ spin_unlock_irqrestore(&data->lock, irq_flags);
+ return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+
+static int goldfish_battery_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct goldfish_battery_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+
+ data->battery.properties = goldfish_battery_props;
+ data->battery.num_properties = ARRAY_SIZE(goldfish_battery_props);
+ data->battery.get_property = goldfish_battery_get_property;
+ data->battery.name = "battery";
+ data->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ data->ac.properties = goldfish_ac_props;
+ data->ac.num_properties = ARRAY_SIZE(goldfish_ac_props);
+ data->ac.get_property = goldfish_ac_get_property;
+ data->ac.name = "ac";
+ data->ac.type = POWER_SUPPLY_TYPE_MAINS;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "platform_get_resource failed\n");
+ return -ENODEV;
+ }
+
+ data->reg_base = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ if (data->reg_base == NULL) {
+ dev_err(&pdev->dev, "unable to remap MMIO\n");
+ return -ENOMEM;
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, data->irq, goldfish_battery_interrupt,
+ IRQF_SHARED, pdev->name, data);
+ if (ret)
+ return ret;
+
+ ret = power_supply_register(&pdev->dev, &data->ac);
+ if (ret)
+ return ret;
+
+ ret = power_supply_register(&pdev->dev, &data->battery);
+ if (ret) {
+ power_supply_unregister(&data->ac);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, data);
+ battery_data = data;
+
+ GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK);
+ return 0;
+}
+
+static int goldfish_battery_remove(struct platform_device *pdev)
+{
+ struct goldfish_battery_data *data = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&data->battery);
+ power_supply_unregister(&data->ac);
+ battery_data = NULL;
+ return 0;
+}
+
+static struct platform_driver goldfish_battery_device = {
+ .probe = goldfish_battery_probe,
+ .remove = goldfish_battery_remove,
+ .driver = {
+ .name = "goldfish-battery"
+ }
+};
+module_platform_driver(goldfish_battery_device);
+
+MODULE_AUTHOR("Mike Lockwood lockwood@android.com");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for the Goldfish emulator");
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index 4ee71a9..5ef41b8 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -367,28 +367,28 @@
return -EINVAL;
if (pdata->get_batt_present)
- val->intval = pchg->pdata->get_batt_present();
+ val->intval = pdata->get_batt_present();
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_level)
- val->intval = pchg->pdata->get_batt_level();
+ val->intval = pdata->get_batt_level();
break;
case POWER_SUPPLY_PROP_CAPACITY:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_capacity)
- val->intval = pchg->pdata->get_batt_capacity();
+ val->intval = pdata->get_batt_capacity();
break;
case POWER_SUPPLY_PROP_TEMP:
if (!pdata)
return -EINVAL;
if (pdata->get_batt_temp)
- val->intval = pchg->pdata->get_batt_temp();
+ val->intval = pdata->get_batt_temp();
break;
default:
break;
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
index 22b6407c..e33d6b2 100644
--- a/drivers/power/lp8788-charger.c
+++ b/drivers/power/lp8788-charger.c
@@ -367,7 +367,8 @@
return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END;
}
-static int lp8788_update_charger_params(struct lp8788_charger *pchg)
+static int lp8788_update_charger_params(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
{
struct lp8788 *lp = pchg->lp;
struct lp8788_charger_platform_data *pdata = pchg->pdata;
@@ -376,7 +377,7 @@
int ret;
if (!pdata || !pdata->chg_params) {
- dev_info(lp->dev, "skip updating charger parameters\n");
+ dev_info(&pdev->dev, "skip updating charger parameters\n");
return 0;
}
@@ -537,7 +538,6 @@
static int lp8788_irq_register(struct platform_device *pdev,
struct lp8788_charger *pchg)
{
- struct lp8788 *lp = pchg->lp;
const char *name[] = {
LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ
};
@@ -550,13 +550,13 @@
for (i = 0; i < ARRAY_SIZE(name); i++) {
ret = lp8788_set_irqs(pdev, pchg, name[i]);
if (ret) {
- dev_warn(lp->dev, "irq setup failed: %s\n", name[i]);
+ dev_warn(&pdev->dev, "irq setup failed: %s\n", name[i]);
return ret;
}
}
if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) {
- dev_err(lp->dev, "invalid total number of irqs: %d\n",
+ dev_err(&pdev->dev, "invalid total number of irqs: %d\n",
pchg->num_irqs);
return -EINVAL;
}
@@ -690,9 +690,10 @@
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
struct lp8788_charger *pchg;
+ struct device *dev = &pdev->dev;
int ret;
- pchg = devm_kzalloc(lp->dev, sizeof(struct lp8788_charger), GFP_KERNEL);
+ pchg = devm_kzalloc(dev, sizeof(struct lp8788_charger), GFP_KERNEL);
if (!pchg)
return -ENOMEM;
@@ -700,7 +701,7 @@
pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL;
platform_set_drvdata(pdev, pchg);
- ret = lp8788_update_charger_params(pchg);
+ ret = lp8788_update_charger_params(pdev, pchg);
if (ret)
return ret;
@@ -718,7 +719,7 @@
ret = lp8788_irq_register(pdev, pchg);
if (ret)
- dev_warn(lp->dev, "failed to register charger irq: %d\n", ret);
+ dev_warn(dev, "failed to register charger irq: %d\n", ret);
return 0;
}
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 22cfe9c..74a0bd9 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -207,7 +207,7 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
return -EIO;
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
@@ -225,7 +225,6 @@
ret = power_supply_register(&client->dev, &chip->battery);
if (ret) {
dev_err(&client->dev, "failed: power supply register\n");
- kfree(chip);
return ret;
}
@@ -244,7 +243,6 @@
power_supply_unregister(&chip->battery);
cancel_delayed_work(&chip->work);
- kfree(chip);
return 0;
}
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
new file mode 100644
index 0000000..ed48d75
--- /dev/null
+++ b/drivers/power/pm2301_charger.c
@@ -0,0 +1,1088 @@
+/*
+ * Copyright 2012 ST Ericsson.
+ *
+ * Power supply driver for ST Ericsson pm2xxx_charger charger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/pm2301_charger.h>
+#include <linux/gpio.h>
+
+#include "pm2301_charger.h"
+
+#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
+ struct pm2xxx_charger, ac_chg)
+
+static int pm2xxx_interrupt_registers[] = {
+ PM2XXX_REG_INT1,
+ PM2XXX_REG_INT2,
+ PM2XXX_REG_INT3,
+ PM2XXX_REG_INT4,
+ PM2XXX_REG_INT5,
+ PM2XXX_REG_INT6,
+};
+
+static enum power_supply_property pm2xxx_charger_ac_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+};
+
+static int pm2xxx_charger_voltage_map[] = {
+ 3500,
+ 3525,
+ 3550,
+ 3575,
+ 3600,
+ 3625,
+ 3650,
+ 3675,
+ 3700,
+ 3725,
+ 3750,
+ 3775,
+ 3800,
+ 3825,
+ 3850,
+ 3875,
+ 3900,
+ 3925,
+ 3950,
+ 3975,
+ 4000,
+ 4025,
+ 4050,
+ 4075,
+ 4100,
+ 4125,
+ 4150,
+ 4175,
+ 4200,
+ 4225,
+ 4250,
+ 4275,
+ 4300,
+};
+
+static int pm2xxx_charger_current_map[] = {
+ 200,
+ 200,
+ 400,
+ 600,
+ 800,
+ 1000,
+ 1200,
+ 1400,
+ 1600,
+ 1800,
+ 2000,
+ 2200,
+ 2400,
+ 2600,
+ 2800,
+ 3000,
+};
+
+static const struct i2c_device_id pm2xxx_ident[] = {
+ { "pm2301", 0 },
+ { }
+};
+
+static void set_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (pm2->ac.charger_connected)
+ return;
+ gpio_set_value(pm2->lpn_pin, 1);
+
+ return;
+}
+
+static void clear_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (pm2->ac.charger_connected)
+ return;
+ gpio_set_value(pm2->lpn_pin, 0);
+
+ return;
+}
+
+static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
+{
+ int ret;
+ /*
+ * When AC adaptor is unplugged, the host
+ * must put LPN high to be able to
+ * communicate by I2C with PM2301
+ * and receive I2C "acknowledge" from PM2301.
+ */
+ mutex_lock(&pm2->lock);
+ set_lpn_pin(pm2);
+
+ ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
+ else
+ ret = 0;
+ clear_lpn_pin(pm2);
+ mutex_unlock(&pm2->lock);
+
+ return ret;
+}
+
+static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
+{
+ int ret;
+ /*
+ * When AC adaptor is unplugged, the host
+ * must put LPN high to be able to
+ * communicate by I2C with PM2301
+ * and receive I2C "acknowledge" from PM2301.
+ */
+ mutex_lock(&pm2->lock);
+ set_lpn_pin(pm2);
+
+ ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, &val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
+ else
+ ret = 0;
+ clear_lpn_pin(pm2);
+ mutex_unlock(&pm2->lock);
+
+ return ret;
+}
+
+static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Enable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA));
+
+ return ret;
+}
+
+static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Disable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
+
+ return ret;
+}
+
+static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+
+int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ int ret = 0;
+
+ pm2->failure_input_ovv++;
+ if (pm2->failure_input_ovv < 4) {
+ ret = pm2xxx_charging_enable_mngt(pm2);
+ goto out;
+ } else {
+ pm2->failure_input_ovv = 0;
+ dev_err(pm2->dev, "Overvoltage detected\n");
+ pm2->flags.ovv = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+ }
+
+out:
+ return ret;
+}
+
+static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev , "20 minutes watchdog occured\n");
+
+ pm2->ac.wd_expired = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+
+ return 0;
+}
+
+static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ switch (val) {
+ case PM2XXX_INT1_ITVBATLOWR:
+ dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
+ break;
+
+ case PM2XXX_INT1_ITVBATLOWF:
+ dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
+ break;
+
+ default:
+ dev_err(pm2->dev, "Unknown VBAT level\n");
+ }
+
+ return 0;
+}
+
+static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev, "battery disconnected\n");
+
+ return 0;
+}
+
+static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
+{
+ int ret;
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
+
+ if (ret < 0) {
+ dev_err(pm2->dev, "Charger detection failed\n");
+ goto out;
+ }
+
+ *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
+
+out:
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val)
+{
+
+ int ret;
+ u8 read_val;
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if the main charger is
+ * connected by reading the interrupt source register.
+ */
+ ret = pm2xxx_charger_detection(pm2, &read_val);
+
+ if ((ret == 0) && read_val) {
+ pm2->ac.charger_connected = 1;
+ pm2->ac_conn = true;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+ }
+
+
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
+ int val)
+{
+ pm2->ac.charger_connected = 0;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+
+ return 0;
+}
+
+static int pm2_int_reg0(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
+ (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
+ }
+
+ if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
+ ret = pm2xxx_charger_bat_disc_mngt(pm2,
+ PM2XXX_INT1_ITVBATDISCONNECT);
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg1(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
+ dev_dbg(pm2->dev , "Main charger plugged\n");
+ ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
+ }
+
+ if (val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
+ dev_dbg(pm2->dev , "Main charger unplugged\n");
+ ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG |
+ PM2XXX_INT2_ITVPWR2UNPLUG));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg2(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
+ ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
+
+ if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
+ PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
+ dev_dbg(pm2->dev,
+ "Watchdog occured for precharge, CC and CV charge\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg3(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT4_ITCHARGINGON)) {
+ dev_dbg(pm2->dev ,
+ "chargind operation has started\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVRESUME)) {
+ dev_dbg(pm2->dev,
+ "battery discharged down to VResume threshold\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITBATTFULL)) {
+ dev_dbg(pm2->dev , "battery fully detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITCVPHASE)) {
+ dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
+ pm2->failure_case = VPWR_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
+ dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT)) {
+ ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
+ (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT));
+ dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg4(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
+ pm2->failure_case = VSYSTEM_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ PM2XXX_INT5_ITVSYSTEMOVV);
+ dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
+ dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
+ ret = pm2xxx_charger_die_therm_mngt(pm2, val &
+ (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg5(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+
+ if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
+ dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
+ }
+
+ if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
+ PM2XXX_INT6_ITVPWR1VALIDRISE |
+ PM2XXX_INT6_ITVPWR2VALIDFALL |
+ PM2XXX_INT6_ITVPWR1VALIDFALL)) {
+ dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
+ }
+
+ return ret;
+}
+
+static irqreturn_t pm2xxx_irq_int(int irq, void *data)
+{
+ struct pm2xxx_charger *pm2 = data;
+ struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
+ int i;
+
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &(interrupt->reg[i]));
+
+ if (interrupt->reg[i] > 0)
+ interrupt->handler[i](pm2, interrupt->reg[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+ u8 val;
+
+ if (pm2->ac.charger_connected && pm2->ac.charger_online) {
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto out;
+ }
+
+ if (val & PM2XXX_INT4_S_ITCVPHASE)
+ ret = PM2XXX_CONST_VOLT;
+ else
+ ret = PM2XXX_CONST_CURR;
+ }
+out:
+ return ret;
+}
+
+static int pm2xxx_current_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_current_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) {
+ if (curr < pm2xxx_charger_current_map[i])
+ return (i - 1);
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1;
+ if (curr == pm2xxx_charger_current_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_voltage_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_voltage_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) {
+ if (curr < pm2xxx_charger_voltage_map[i])
+ return i - 1;
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1;
+ if (curr == pm2xxx_charger_voltage_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
+ int ich_out)
+{
+ int ret;
+ int curr_index;
+ struct pm2xxx_charger *pm2;
+ u8 val;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ curr_index = pm2xxx_current_to_regval(ich_out);
+ if (curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger current too high, charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret >= 0) {
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev,
+ "%s write failed\n", __func__);
+ }
+ }
+ else
+ dev_err(pm2->dev, "%s read failed\n", __func__);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm2xxx_charger *pm2;
+
+ pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (pm2->flags.mainextchnotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (pm2->ac.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (pm2->flags.main_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = pm2->ac.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = pm2->ac.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2);
+ val->intval = pm2->ac.cv_active;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+
+ /* enable CC and CV watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3,
+ (PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN));
+ if( ret < 0)
+ return ret;
+
+ /* enable precharge watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
+ PM2XXX_CH_WD_PRECH_PHASE_60MIN);
+
+ /* Disable auto timeout */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
+ PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
+
+ /*
+ * EOC current level = 100mA
+ * Precharge current level = 100mA
+ * CC current level = 1000mA
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
+ (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
+ PM2XXX_CH_PRECH_CURRENT_100MA |
+ PM2XXX_CH_EOC_CURRENT_100MA));
+
+ /*
+ * recharge threshold = 3.8V
+ * Precharge to CC threshold = 2.9V
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
+ (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
+
+ /* float voltage charger level = 4.2V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
+ PM2XXX_CH_VOLT_4_2);
+
+ /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
+ (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
+ PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
+ PM2XXX_CH_CC_MODEDROP_DIS));
+
+ /* Input charger level of over voltage = 10V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
+ PM2XXX_VPWR2_OVV_10);
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
+ PM2XXX_VPWR1_OVV_10);
+
+ /* Input charger drop */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
+ (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
+ PM2XXX_VPWR2_DROP_DIS));
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
+ (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
+ PM2XXX_VPWR1_DROP_DIS));
+
+ /* Disable battery low monitoring */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
+ PM2XXX_VBAT_LOW_MONITORING_ENA);
+
+ /* Disable LED */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
+ PM2XXX_LED_SELECT_DIS);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
+ int enable, int vset, int iset)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ u8 val;
+
+ struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger);
+
+ if (enable) {
+ if (!pm2->ac.charger_connected) {
+ dev_dbg(pm2->dev, "AC charger not connected\n");
+ return -ENXIO;
+ }
+
+ dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+ if (!pm2->vddadc_en_ac) {
+ regulator_enable(pm2->regu);
+ pm2->vddadc_en_ac = true;
+ }
+
+ ret = pm2xxx_charging_init(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s charging init failed\n",
+ __func__);
+ goto error_occured;
+ }
+
+ volt_index = pm2xxx_voltage_to_regval(vset);
+ curr_index = pm2xxx_current_to_regval(iset);
+
+ if (volt_index < 0 || curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_CH_VOLT_MASK;
+ val |= volt_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ if (!pm2->bat->enable_overshoot) {
+ ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n",
+ __func__);
+ goto error_occured;
+ }
+ val |= PM2XXX_ANTI_OVERSHOOT_EN;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n",
+ __func__);
+ goto error_occured;
+ }
+ }
+
+ ret = pm2xxx_charging_enable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "Failed to enable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ pm2->ac.charger_online = 1;
+ } else {
+ pm2->ac.charger_online = 0;
+ pm2->ac.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (pm2->vddadc_en_ac) {
+ regulator_disable(pm2->regu);
+ pm2->vddadc_en_ac = false;
+ }
+
+ ret = pm2xxx_charging_disable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "failed to disable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");
+ }
+ power_supply_changed(&pm2->ac_chg.psy);
+
+error_occured:
+ return ret;
+}
+
+static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger)
+{
+ int ret;
+ struct pm2xxx_charger *pm2;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER);
+ if (ret)
+ dev_err(pm2->dev, "Failed to kick WD!\n");
+
+ return ret;
+}
+
+static void pm2xxx_charger_ac_work(struct work_struct *work)
+{
+ struct pm2xxx_charger *pm2 = container_of(work,
+ struct pm2xxx_charger, ac_work);
+
+
+ power_supply_changed(&pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
+};
+
+static void pm2xxx_charger_check_main_thermal_prot_work(
+ struct work_struct *work)
+{
+};
+
+static struct pm2xxx_interrupts pm2xxx_int = {
+ .handler[0] = pm2_int_reg0,
+ .handler[1] = pm2_int_reg1,
+ .handler[2] = pm2_int_reg2,
+ .handler[3] = pm2_int_reg3,
+ .handler[4] = pm2_int_reg4,
+ .handler[5] = pm2_int_reg5,
+};
+
+static struct pm2xxx_irq pm2xxx_charger_irq[] = {
+ {"PM2XXX_IRQ_INT", pm2xxx_irq_int},
+};
+
+static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client)
+{
+ return 0;
+}
+
+static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
+ const struct i2c_device_id *id)
+{
+ struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
+ struct pm2xxx_charger *pm2;
+ int ret = 0;
+ u8 val;
+
+ pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
+ if (!pm2) {
+ dev_err(pm2->dev, "pm2xxx_charger allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* get parent data */
+ pm2->dev = &i2c_client->dev;
+ pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+ pm2->pm2_int = &pm2xxx_int;
+
+ /* get charger spcific platform data */
+ if (!pl_data->wall_charger) {
+ dev_err(pm2->dev, "no charger platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->pdata = pl_data->wall_charger;
+
+ /* get battery specific platform data */
+ if (!pl_data->battery) {
+ dev_err(pm2->dev, "no battery platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->bat = pl_data->battery;
+
+ /*get lpn GPIO from platform data*/
+ if (!pm2->pdata->lpn_gpio) {
+ dev_err(pm2->dev, "no lpn gpio data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+ pm2->lpn_pin = pm2->pdata->lpn_gpio;
+
+ if (!i2c_check_functionality(i2c_client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ ret = -ENODEV;
+ dev_info(pm2->dev, "pm2301 i2c_check_functionality failed\n");
+ goto free_device_info;
+ }
+
+ pm2->config.pm2xxx_i2c = i2c_client;
+ pm2->config.pm2xxx_id = (struct i2c_device_id *) id;
+ i2c_set_clientdata(i2c_client, pm2);
+
+ /* AC supply */
+ /* power_supply base class */
+ pm2->ac_chg.psy.name = pm2->pdata->label;
+ pm2->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS;
+ pm2->ac_chg.psy.properties = pm2xxx_charger_ac_props;
+ pm2->ac_chg.psy.num_properties = ARRAY_SIZE(pm2xxx_charger_ac_props);
+ pm2->ac_chg.psy.get_property = pm2xxx_charger_ac_get_property;
+ pm2->ac_chg.psy.supplied_to = pm2->pdata->supplied_to;
+ pm2->ac_chg.psy.num_supplicants = pm2->pdata->num_supplicants;
+ /* pm2xxx_charger sub-class */
+ pm2->ac_chg.ops.enable = &pm2xxx_charger_ac_en;
+ pm2->ac_chg.ops.kick_wd = &pm2xxx_charger_watchdog_kick;
+ pm2->ac_chg.ops.update_curr = &pm2xxx_charger_update_charger_current;
+ pm2->ac_chg.max_out_volt = pm2xxx_charger_voltage_map[
+ ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
+ pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
+ ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
+ pm2->ac_chg.wdt_refresh = WD_KICK_INTERVAL;
+ pm2->ac_chg.enabled = true;
+ pm2->ac_chg.external = true;
+
+ /* Create a work queue for the charger */
+ pm2->charger_wq =
+ create_singlethread_workqueue("pm2xxx_charger_wq");
+ if (pm2->charger_wq == NULL) {
+ dev_err(pm2->dev, "failed to create work queue\n");
+ goto free_device_info;
+ }
+
+ /* Init work for charger detection */
+ INIT_WORK(&pm2->ac_work, pm2xxx_charger_ac_work);
+
+ /* Init work for checking HW status */
+ INIT_WORK(&pm2->check_main_thermal_prot_work,
+ pm2xxx_charger_check_main_thermal_prot_work);
+
+ /*
+ * VDD ADC supply needs to be enabled from this driver when there
+ * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+ * interrupts during charging
+ */
+ pm2->regu = regulator_get(pm2->dev, "vddadc");
+ if (IS_ERR(pm2->regu)) {
+ ret = PTR_ERR(pm2->regu);
+ dev_err(pm2->dev, "failed to get vddadc regulator\n");
+ goto free_charger_wq;
+ }
+
+ /* Register AC charger class */
+ ret = power_supply_register(pm2->dev, &pm2->ac_chg.psy);
+ if (ret) {
+ dev_err(pm2->dev, "failed to register AC charger\n");
+ goto free_regulator;
+ }
+
+ /* Register interrupts */
+ ret = request_threaded_irq(pm2->pdata->irq_number, NULL,
+ pm2xxx_charger_irq[0].isr,
+ pm2->pdata->irq_type,
+ pm2xxx_charger_irq[0].name, pm2);
+
+ if (ret != 0) {
+ dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
+ pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret);
+ goto unregister_pm2xxx_charger;
+ }
+
+ /*Initialize lock*/
+ mutex_init(&pm2->lock);
+
+ /*
+ * Charger detection mechanism requires pulling up the LPN pin
+ * while i2c communication if Charger is not connected
+ * LPN pin of PM2301 is GPIO60 of AB9540
+ */
+ ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
+ goto unregister_pm2xxx_charger;
+ }
+ ret = gpio_direction_output(pm2->lpn_pin, 0);
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
+ goto free_gpio;
+ }
+
+ ret = pm2xxx_charger_detection(pm2, &val);
+
+ if ((ret == 0) && val) {
+ pm2->ac.charger_connected = 1;
+ pm2->ac_conn = true;
+ power_supply_changed(&pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
+ }
+
+ return 0;
+
+free_gpio:
+ gpio_free(pm2->lpn_pin);
+unregister_pm2xxx_charger:
+ /* unregister power supply */
+ power_supply_unregister(&pm2->ac_chg.psy);
+free_regulator:
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+free_charger_wq:
+ destroy_workqueue(pm2->charger_wq);
+free_device_info:
+ kfree(pm2);
+ return ret;
+}
+
+static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
+{
+ struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
+
+ /* Disable AC charging */
+ pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
+
+ /* Disable interrupts */
+ free_irq(pm2->pdata->irq_number, pm2);
+
+ /* Delete the work queue */
+ destroy_workqueue(pm2->charger_wq);
+
+ flush_scheduled_work();
+
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+
+ power_supply_unregister(&pm2->ac_chg.psy);
+
+ /*Free GPIO60*/
+ gpio_free(pm2->lpn_pin);
+
+ kfree(pm2);
+
+ return 0;
+}
+
+static const struct i2c_device_id pm2xxx_id[] = {
+ { "pm2301", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
+
+static struct i2c_driver pm2xxx_charger_driver = {
+ .probe = pm2xxx_wall_charger_probe,
+ .remove = __devexit_p(pm2xxx_wall_charger_remove),
+ .suspend = pm2xxx_wall_charger_suspend,
+ .resume = pm2xxx_wall_charger_resume,
+ .driver = {
+ .name = "pm2xxx-wall_charger",
+ .owner = THIS_MODULE,
+ },
+ .id_table = pm2xxx_id,
+};
+
+static int __init pm2xxx_charger_init(void)
+{
+ return i2c_add_driver(&pm2xxx_charger_driver);
+}
+
+static void __exit pm2xxx_charger_exit(void)
+{
+ i2c_del_driver(&pm2xxx_charger_driver);
+}
+
+subsys_initcall_sync(pm2xxx_charger_init);
+module_exit(pm2xxx_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
+MODULE_ALIAS("platform:pm2xxx-charger");
+MODULE_DESCRIPTION("PM2xxx charger management driver");
+
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
new file mode 100644
index 0000000..e6319cd
--- /dev/null
+++ b/drivers/power/pm2301_charger.h
@@ -0,0 +1,513 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * PM2301 power supply interface
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef PM2301_CHARGER_H
+#define PM2301_CHARGER_H
+
+#define MAIN_WDOG_ENA 0x01
+#define MAIN_WDOG_KICK 0x02
+#define MAIN_WDOG_DIS 0x00
+#define CHARG_WD_KICK 0x01
+#define MAIN_CH_ENA 0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
+#define MAIN_CH_DET 0x01
+#define MAIN_CH_CV_ON 0x04
+#define OTP_ENABLE_WD 0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT 4
+
+#define LED_INDICATOR_PWM_ENA 0x01
+#define LED_INDICATOR_PWM_DIS 0x00
+#define LED_IND_CUR_5MA 0x04
+#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT 0x02
+#define MAIN_CH_NOK 0x01
+
+/* Watchdog timeout constant */
+#define WD_TIMER 0x30 /* 4min */
+#define WD_KICK_INTERVAL (30 * HZ)
+
+#define PM2XXX_NUM_INT_REG 0x6
+
+/* Constant voltage/current */
+#define PM2XXX_CONST_CURR 0x0
+#define PM2XXX_CONST_VOLT 0x1
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG 0x4E
+
+#define PM2XXX_BATT_CTRL_REG1 0x00
+#define PM2XXX_BATT_CTRL_REG2 0x01
+#define PM2XXX_BATT_CTRL_REG3 0x02
+#define PM2XXX_BATT_CTRL_REG4 0x03
+#define PM2XXX_BATT_CTRL_REG5 0x04
+#define PM2XXX_BATT_CTRL_REG6 0x05
+#define PM2XXX_BATT_CTRL_REG7 0x06
+#define PM2XXX_BATT_CTRL_REG8 0x07
+#define PM2XXX_NTC_CTRL_REG1 0x08
+#define PM2XXX_NTC_CTRL_REG2 0x09
+#define PM2XXX_BATT_CTRL_REG9 0x0A
+#define PM2XXX_BATT_STAT_REG1 0x0B
+#define PM2XXX_INP_VOLT_VPWR2 0x11
+#define PM2XXX_INP_DROP_VPWR2 0x13
+#define PM2XXX_INP_VOLT_VPWR1 0x15
+#define PM2XXX_INP_DROP_VPWR1 0x17
+#define PM2XXX_INP_MODE_VPWR 0x18
+#define PM2XXX_BATT_WD_KICK 0x70
+#define PM2XXX_DEV_VER_STAT 0x0C
+#define PM2XXX_THERM_WARN_CTRL_REG 0x20
+#define PM2XXX_BATT_DISC_REG 0x21
+#define PM2XXX_BATT_LOW_LEV_COMP_REG 0x22
+#define PM2XXX_BATT_LOW_LEV_VAL_REG 0x23
+#define PM2XXX_I2C_PAD_CTRL_REG 0x24
+#define PM2XXX_SW_CTRL_REG 0x26
+#define PM2XXX_LED_CTRL_REG 0x28
+
+#define PM2XXX_REG_INT1 0x40
+#define PM2XXX_MASK_REG_INT1 0x50
+#define PM2XXX_SRCE_REG_INT1 0x60
+#define PM2XXX_REG_INT2 0x41
+#define PM2XXX_MASK_REG_INT2 0x51
+#define PM2XXX_SRCE_REG_INT2 0x61
+#define PM2XXX_REG_INT3 0x42
+#define PM2XXX_MASK_REG_INT3 0x52
+#define PM2XXX_SRCE_REG_INT3 0x62
+#define PM2XXX_REG_INT4 0x43
+#define PM2XXX_MASK_REG_INT4 0x53
+#define PM2XXX_SRCE_REG_INT4 0x63
+#define PM2XXX_REG_INT5 0x44
+#define PM2XXX_MASK_REG_INT5 0x54
+#define PM2XXX_SRCE_REG_INT5 0x64
+#define PM2XXX_REG_INT6 0x45
+#define PM2XXX_MASK_REG_INT6 0x55
+#define PM2XXX_SRCE_REG_INT6 0x65
+
+#define VPWR_OVV 0x0
+#define VSYSTEM_OVV 0x1
+
+/* control Reg 1 */
+#define PM2XXX_CH_RESUME_EN 0x1
+#define PM2XXX_CH_RESUME_DIS 0x0
+
+/* control Reg 2 */
+#define PM2XXX_CH_AUTO_RESUME_EN 0X2
+#define PM2XXX_CH_AUTO_RESUME_DIS 0X0
+#define PM2XXX_CHARGER_ENA 0x4
+#define PM2XXX_CHARGER_DIS 0x0
+
+/* control Reg 3 */
+#define PM2XXX_CH_WD_CC_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_CC_PHASE_5MIN 0x1
+#define PM2XXX_CH_WD_CC_PHASE_10MIN 0x2
+#define PM2XXX_CH_WD_CC_PHASE_30MIN 0x3
+#define PM2XXX_CH_WD_CC_PHASE_60MIN 0x4
+#define PM2XXX_CH_WD_CC_PHASE_120MIN 0x5
+#define PM2XXX_CH_WD_CC_PHASE_240MIN 0x6
+#define PM2XXX_CH_WD_CC_PHASE_360MIN 0x7
+
+#define PM2XXX_CH_WD_CV_PHASE_OFF (0x0<<3)
+#define PM2XXX_CH_WD_CV_PHASE_5MIN (0x1<<3)
+#define PM2XXX_CH_WD_CV_PHASE_10MIN (0x2<<3)
+#define PM2XXX_CH_WD_CV_PHASE_30MIN (0x3<<3)
+#define PM2XXX_CH_WD_CV_PHASE_60MIN (0x4<<3)
+#define PM2XXX_CH_WD_CV_PHASE_120MIN (0x5<<3)
+#define PM2XXX_CH_WD_CV_PHASE_240MIN (0x6<<3)
+#define PM2XXX_CH_WD_CV_PHASE_360MIN (0x7<<3)
+
+/* control Reg 4 */
+#define PM2XXX_CH_WD_PRECH_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_PRECH_PHASE_1MIN 0x1
+#define PM2XXX_CH_WD_PRECH_PHASE_5MIN 0x2
+#define PM2XXX_CH_WD_PRECH_PHASE_10MIN 0x3
+#define PM2XXX_CH_WD_PRECH_PHASE_30MIN 0x4
+#define PM2XXX_CH_WD_PRECH_PHASE_60MIN 0x5
+#define PM2XXX_CH_WD_PRECH_PHASE_120MIN 0x6
+#define PM2XXX_CH_WD_PRECH_PHASE_240MIN 0x7
+
+/* control Reg 5 */
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_NONE 0x0
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN 0x1
+
+/* control Reg 6 */
+#define PM2XXX_DIR_CH_CC_CURRENT_MASK 0x0F
+#define PM2XXX_DIR_CH_CC_CURRENT_200MA 0x0
+#define PM2XXX_DIR_CH_CC_CURRENT_400MA 0x2
+#define PM2XXX_DIR_CH_CC_CURRENT_600MA 0x3
+#define PM2XXX_DIR_CH_CC_CURRENT_800MA 0x4
+#define PM2XXX_DIR_CH_CC_CURRENT_1000MA 0x5
+#define PM2XXX_DIR_CH_CC_CURRENT_1200MA 0x6
+#define PM2XXX_DIR_CH_CC_CURRENT_1400MA 0x7
+#define PM2XXX_DIR_CH_CC_CURRENT_1600MA 0x8
+#define PM2XXX_DIR_CH_CC_CURRENT_1800MA 0x9
+#define PM2XXX_DIR_CH_CC_CURRENT_2000MA 0xA
+#define PM2XXX_DIR_CH_CC_CURRENT_2200MA 0xB
+#define PM2XXX_DIR_CH_CC_CURRENT_2400MA 0xC
+#define PM2XXX_DIR_CH_CC_CURRENT_2600MA 0xD
+#define PM2XXX_DIR_CH_CC_CURRENT_2800MA 0xE
+#define PM2XXX_DIR_CH_CC_CURRENT_3000MA 0xF
+
+#define PM2XXX_CH_PRECH_CURRENT_MASK 0x30
+#define PM2XXX_CH_PRECH_CURRENT_25MA (0x0<<4)
+#define PM2XXX_CH_PRECH_CURRENT_50MA (0x1<<4)
+#define PM2XXX_CH_PRECH_CURRENT_75MA (0x2<<4)
+#define PM2XXX_CH_PRECH_CURRENT_100MA (0x3<<4)
+
+#define PM2XXX_CH_EOC_CURRENT_MASK 0xC0
+#define PM2XXX_CH_EOC_CURRENT_100MA (0x0<<6)
+#define PM2XXX_CH_EOC_CURRENT_150MA (0x1<<6)
+#define PM2XXX_CH_EOC_CURRENT_300MA (0x2<<6)
+#define PM2XXX_CH_EOC_CURRENT_400MA (0x3<<6)
+
+/* control Reg 7 */
+#define PM2XXX_CH_PRECH_VOL_2_5 0x0
+#define PM2XXX_CH_PRECH_VOL_2_7 0x1
+#define PM2XXX_CH_PRECH_VOL_2_9 0x2
+#define PM2XXX_CH_PRECH_VOL_3_1 0x3
+
+#define PM2XXX_CH_VRESUME_VOL_3_2 (0x0<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_4 (0x1<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_6 (0x2<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_8 (0x3<<2)
+
+/* control Reg 8 */
+#define PM2XXX_CH_VOLT_MASK 0x3F
+#define PM2XXX_CH_VOLT_3_5 0x0
+#define PM2XXX_CH_VOLT_3_5225 0x1
+#define PM2XXX_CH_VOLT_3_6 0x4
+#define PM2XXX_CH_VOLT_3_7 0x8
+#define PM2XXX_CH_VOLT_4_0 0x14
+#define PM2XXX_CH_VOLT_4_175 0x1B
+#define PM2XXX_CH_VOLT_4_2 0x1C
+#define PM2XXX_CH_VOLT_4_275 0x1F
+#define PM2XXX_CH_VOLT_4_3 0x20
+
+/*NTC control register 1*/
+#define PM2XXX_BTEMP_HIGH_TH_45 0x0
+#define PM2XXX_BTEMP_HIGH_TH_50 0x1
+#define PM2XXX_BTEMP_HIGH_TH_55 0x2
+#define PM2XXX_BTEMP_HIGH_TH_60 0x3
+#define PM2XXX_BTEMP_HIGH_TH_65 0x4
+
+#define PM2XXX_BTEMP_LOW_TH_N5 (0x0<<3)
+#define PM2XXX_BTEMP_LOW_TH_0 (0x1<<3)
+#define PM2XXX_BTEMP_LOW_TH_5 (0x2<<3)
+#define PM2XXX_BTEMP_LOW_TH_10 (0x3<<3)
+
+/*NTC control register 2*/
+#define PM2XXX_NTC_BETA_COEFF_3477 0x0
+#define PM2XXX_NTC_BETA_COEFF_3964 0x1
+
+#define PM2XXX_NTC_RES_10K (0x0<<2)
+#define PM2XXX_NTC_RES_47K (0x1<<2)
+#define PM2XXX_NTC_RES_100K (0x2<<2)
+#define PM2XXX_NTC_RES_NO_NTC (0x3<<2)
+
+/* control Reg 9 */
+#define PM2XXX_CH_CC_MODEDROP_EN 1
+#define PM2XXX_CH_CC_MODEDROP_DIS 0
+
+#define PM2XXX_CH_CC_REDUCED_CURRENT_100MA (0x0<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_200MA (0x1<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_400MA (0x2<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_IDENT (0x3<<1)
+
+#define PM2XXX_CHARCHING_INFO_DIS (0<<3)
+#define PM2XXX_CHARCHING_INFO_EN (1<<3)
+
+#define PM2XXX_CH_150MV_DROP_300MV (0<<4)
+#define PM2XXX_CH_150MV_DROP_150MV (1<<4)
+
+
+/* charger status register */
+#define PM2XXX_CHG_STATUS_OFF 0x0
+#define PM2XXX_CHG_STATUS_ON 0x1
+#define PM2XXX_CHG_STATUS_FULL 0x2
+#define PM2XXX_CHG_STATUS_ERR 0x3
+#define PM2XXX_CHG_STATUS_WAIT 0x4
+#define PM2XXX_CHG_STATUS_NOBAT 0x5
+
+/* Input charger voltage VPWR2 */
+#define PM2XXX_VPWR2_OVV_6_0 0x0
+#define PM2XXX_VPWR2_OVV_6_3 0x1
+#define PM2XXX_VPWR2_OVV_10 0x2
+#define PM2XXX_VPWR2_OVV_NONE 0x3
+
+/* Input charger drop VPWR2 */
+#define PM2XXX_VPWR2_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR2_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR2_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR2_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR2_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR2_DROP_DIS (0x0<<2)
+
+/* Input charger voltage VPWR1 */
+#define PM2XXX_VPWR1_OVV_6_0 0x0
+#define PM2XXX_VPWR1_OVV_6_3 0x1
+#define PM2XXX_VPWR1_OVV_10 0x2
+#define PM2XXX_VPWR1_OVV_NONE 0x3
+
+/* Input charger drop VPWR1 */
+#define PM2XXX_VPWR1_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR1_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR1_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR1_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR1_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR1_DROP_DIS (0x0<<2)
+
+/* Battery low level comparator control register */
+#define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0
+#define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1
+
+/* Battery low level value control register */
+#define PM2XXX_VBAT_LOW_LEVEL_2_3 0x0
+#define PM2XXX_VBAT_LOW_LEVEL_2_4 0x1
+#define PM2XXX_VBAT_LOW_LEVEL_2_5 0x2
+#define PM2XXX_VBAT_LOW_LEVEL_2_6 0x3
+#define PM2XXX_VBAT_LOW_LEVEL_2_7 0x4
+#define PM2XXX_VBAT_LOW_LEVEL_2_8 0x5
+#define PM2XXX_VBAT_LOW_LEVEL_2_9 0x6
+#define PM2XXX_VBAT_LOW_LEVEL_3_0 0x7
+#define PM2XXX_VBAT_LOW_LEVEL_3_1 0x8
+#define PM2XXX_VBAT_LOW_LEVEL_3_2 0x9
+#define PM2XXX_VBAT_LOW_LEVEL_3_3 0xA
+#define PM2XXX_VBAT_LOW_LEVEL_3_4 0xB
+#define PM2XXX_VBAT_LOW_LEVEL_3_5 0xC
+#define PM2XXX_VBAT_LOW_LEVEL_3_6 0xD
+#define PM2XXX_VBAT_LOW_LEVEL_3_7 0xE
+#define PM2XXX_VBAT_LOW_LEVEL_3_8 0xF
+#define PM2XXX_VBAT_LOW_LEVEL_3_9 0x10
+#define PM2XXX_VBAT_LOW_LEVEL_4_0 0x11
+#define PM2XXX_VBAT_LOW_LEVEL_4_1 0x12
+#define PM2XXX_VBAT_LOW_LEVEL_4_2 0x13
+
+/* SW CTRL */
+#define PM2XXX_SWCTRL_HW 0x0
+#define PM2XXX_SWCTRL_SW 0x1
+
+
+/* LED Driver Control */
+#define PM2XXX_LED_CURRENT_MASK 0x0C
+#define PM2XXX_LED_CURRENT_2_5MA (0X0<<2)
+#define PM2XXX_LED_CURRENT_1MA (0X1<<2)
+#define PM2XXX_LED_CURRENT_5MA (0X2<<2)
+#define PM2XXX_LED_CURRENT_10MA (0X3<<2)
+
+#define PM2XXX_LED_SELECT_MASK 0x02
+#define PM2XXX_LED_SELECT_EN (0X0<<1)
+#define PM2XXX_LED_SELECT_DIS (0X1<<1)
+
+#define PM2XXX_ANTI_OVERSHOOT_MASK 0x01
+#define PM2XXX_ANTI_OVERSHOOT_DIS 0X0
+#define PM2XXX_ANTI_OVERSHOOT_EN 0X1
+
+enum pm2xxx_reg_int1 {
+ PM2XXX_INT1_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_mask_reg_int1 {
+ PM2XXX_INT1_M_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_M_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_M_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_source_reg_int1 {
+ PM2XXX_INT1_S_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_S_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_S_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_reg_int2 {
+ PM2XXX_INT2_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_mask_reg_int2 {
+ PM2XXX_INT2_M_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_M_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_M_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_M_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_source_reg_int2 {
+ PM2XXX_INT2_S_ITVPWR2PLUG = 0x03,
+ PM2XXX_INT2_S_ITVPWR1PLUG = 0x0c,
+};
+
+enum pm2xxx_reg_int3 {
+ PM2XXX_INT3_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_ITCHCCWD = 0x02,
+ PM2XXX_INT3_ITCHCVWD = 0x04,
+ PM2XXX_INT3_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_mask_reg_int3 {
+ PM2XXX_INT3_M_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_M_ITCHCCWD = 0x02,
+ PM2XXX_INT3_M_ITCHCVWD = 0x04,
+ PM2XXX_INT3_M_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_source_reg_int3 {
+ PM2XXX_INT3_S_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_S_ITCHCCWD = 0x02,
+ PM2XXX_INT3_S_ITCHCVWD = 0x04,
+ PM2XXX_INT3_S_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_reg_int4 {
+ PM2XXX_INT4_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_ITVRESUME = 0x20,
+ PM2XXX_INT4_ITBATTFULL = 0x40,
+ PM2XXX_INT4_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_mask_reg_int4 {
+ PM2XXX_INT4_M_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_M_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_M_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_M_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_M_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_M_ITVRESUME = 0x20,
+ PM2XXX_INT4_M_ITBATTFULL = 0x40,
+ PM2XXX_INT4_M_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_source_reg_int4 {
+ PM2XXX_INT4_S_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_S_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_S_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_S_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_S_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_S_ITVRESUME = 0x20,
+ PM2XXX_INT4_S_ITBATTFULL = 0x40,
+ PM2XXX_INT4_S_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_reg_int5 {
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_mask_reg_int5 {
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_M_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_M_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_M_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_source_reg_int5 {
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_S_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_S_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_S_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_reg_int6 {
+ PM2XXX_INT6_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_mask_reg_int6 {
+ PM2XXX_INT6_M_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_M_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_M_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_M_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_M_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_M_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_source_reg_int6 {
+ PM2XXX_INT6_S_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_S_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_S_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_S_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_S_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_S_ITVPWR1VALIDFALL = 0x20,
+};
+
+struct pm2xxx_charger_info {
+ int charger_connected;
+ int charger_online;
+ int cv_active;
+ bool wd_expired;
+};
+
+struct pm2xxx_charger_event_flags {
+ bool mainextchnotok;
+ bool main_thermal_prot;
+ bool ovv;
+ bool chgwdexp;
+};
+
+struct pm2xxx_interrupts {
+ u8 reg[PM2XXX_NUM_INT_REG];
+ int (*handler[PM2XXX_NUM_INT_REG])(void *, int);
+};
+
+struct pm2xxx_config {
+ struct i2c_client *pm2xxx_i2c;
+ struct i2c_device_id *pm2xxx_id;
+};
+
+struct pm2xxx_irq {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct pm2xxx_charger {
+ struct device *dev;
+ u8 chip_id;
+ bool vddadc_en_ac;
+ struct pm2xxx_config config;
+ bool ac_conn;
+ unsigned int gpio_irq;
+ int vbat;
+ int old_vbat;
+ int failure_case;
+ int failure_input_ovv;
+ unsigned int lpn_pin;
+ struct pm2xxx_interrupts *pm2_int;
+ struct ab8500_gpadc *gpadc;
+ struct regulator *regu;
+ struct pm2xxx_bm_data *bat;
+ struct mutex lock;
+ struct ab8500 *parent;
+ struct pm2xxx_charger_info ac;
+ struct pm2xxx_charger_platform_data *pdata;
+ struct workqueue_struct *charger_wq;
+ struct delayed_work check_vbat_work;
+ struct work_struct ac_work;
+ struct work_struct check_main_thermal_prot_work;
+ struct ux500_charger ac_chg;
+ struct pm2xxx_charger_event_flags flags;
+};
+
+#endif /* PM2301_CHARGER_H */
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 40fa3b7..29178f7 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -55,7 +55,8 @@
};
static char *health_text[] = {
"Unknown", "Good", "Overheat", "Dead", "Over voltage",
- "Unspecified failure", "Cold",
+ "Unspecified failure", "Cold", "Watchdog timer expire",
+ "Safety timer expire"
};
static char *technology_text[] = {
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6461b48..1ae65b8 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -13,3 +13,20 @@
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+ bool "QNAP power-off driver"
+ depends on OF_GPIO && POWER_RESET && PLAT_ORION
+ help
+ This driver supports turning off QNAP NAS devices by sending
+ commands to the microcontroller which controls the main power.
+
+ Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+ bool "Restart power-off driver"
+ depends on ARM
+ help
+ Some boards don't actually have the ability to power off.
+ Instead they restart, and u-boot holds the SoC until the
+ user presses a key. u-boot then boots into Linux.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 751488a..0f317f5 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
\ No newline at end of file
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
new file mode 100644
index 0000000..37f56f7
--- /dev/null
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,116 @@
+/*
+ * QNAP Turbo NAS Board power off
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x) (base + ((UART_##x) << 2))
+
+static void __iomem *base;
+static unsigned long tclk;
+
+static void qnap_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_err("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *clk;
+ char symname[KSYM_NAME_LEN];
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing resource");
+ return -EINVAL;
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "Unable to map resource");
+ return -EINVAL;
+ }
+
+ /* We need to know tclk in order to calculate the UART divisor */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Clk missing");
+ return PTR_ERR(clk);
+ }
+
+ tclk = clk_get_rate(clk);
+
+ /* Check that nothing else has already setup a handler */
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ dev_err(&pdev->dev,
+ "pm_power_off already claimed %p %s",
+ pm_power_off, symname);
+ return -EBUSY;
+ }
+ pm_power_off = qnap_power_off;
+
+ return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+ pm_power_off = NULL;
+ return 0;
+}
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static struct platform_driver qnap_power_off_driver = {
+ .probe = qnap_power_off_probe,
+ .remove = qnap_power_off_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "qnap_power_off",
+ .of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+ },
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c
new file mode 100644
index 0000000..059cd15
--- /dev/null
+++ b/drivers/power/reset/restart-poweroff.c
@@ -0,0 +1,65 @@
+/*
+ * Power off by restarting and let u-boot keep hold of the machine
+ * until the user presses a button for example.
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Andrew Lunn
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static void restart_poweroff_do_poweroff(void)
+{
+ arm_pm_restart('h', NULL);
+}
+
+static int restart_poweroff_probe(struct platform_device *pdev)
+{
+ /* If a pm_power_off function has already been added, leave it alone */
+ if (pm_power_off != NULL) {
+ dev_err(&pdev->dev,
+ "pm_power_off function already registered");
+ return -EBUSY;
+ }
+
+ pm_power_off = &restart_poweroff_do_poweroff;
+ return 0;
+}
+
+static int restart_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == &restart_poweroff_do_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id of_restart_poweroff_match[] = {
+ { .compatible = "restart-poweroff", },
+ {},
+};
+
+static struct platform_driver restart_poweroff_driver = {
+ .probe = restart_poweroff_probe,
+ .remove = restart_poweroff_remove,
+ .driver = {
+ .name = "poweroff-restart",
+ .owner = THIS_MODULE,
+ .of_match_table = of_restart_poweroff_match,
+ },
+};
+module_platform_driver(restart_poweroff_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("restart poweroff driver");
+MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:poweroff-restart");
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 2b55711..c79ab84 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -30,8 +30,6 @@
unsigned int *vol_table;
unsigned int *vol_suspend;
- int update_reg;
- int update_bit;
int slope_double;
};
@@ -222,29 +220,6 @@
return ret;
}
-static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
-{
- struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
- uint8_t val;
- int ret;
-
- val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
-
- ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, val);
- if (ret)
- return ret;
- switch (info->desc.id) {
- case PM8607_ID_BUCK1:
- case PM8607_ID_BUCK3:
- ret = pm860x_set_bits(info->i2c, info->update_reg,
- 1 << info->update_bit,
- 1 << info->update_bit);
- break;
- }
- return ret;
-}
-
static int pm8606_preg_enable(struct regulator_dev *rdev)
{
struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
@@ -276,7 +251,7 @@
static struct regulator_ops pm8607_regulator_ops = {
.list_voltage = pm8607_list_voltage,
- .set_voltage_sel = pm8607_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -313,11 +288,11 @@
.n_voltages = ARRAY_SIZE(vreg##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \
+ .apply_reg = PM8607_##ureg, \
+ .apply_bit = (ubit), \
.enable_reg = PM8607_##ereg, \
.enable_mask = 1 << (ebit), \
}, \
- .update_reg = PM8607_##ureg, \
- .update_bit = (ubit), \
.slope_double = (0), \
.vol_table = (unsigned int *)&vreg##_table, \
.vol_suspend = (unsigned int *)&vreg##_suspend_table, \
@@ -343,9 +318,9 @@
}
static struct pm8607_regulator_info pm8607_regulator_info[] = {
- PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
- PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
- PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
+ PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0),
+ PM8607_DVC(BUCK2, GO, BIT(1), SUPPLIES_EN11, 1),
+ PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2),
PM8607_LDO(1, LDO1, 0, SUPPLIES_EN11, 3),
PM8607_LDO(2, LDO2, 0, SUPPLIES_EN11, 4),
@@ -372,7 +347,7 @@
struct regulator_config *config)
{
struct device_node *nproot, *np;
- nproot = pdev->dev.parent->of_node;
+ nproot = of_node_get(pdev->dev.parent->of_node);
if (!nproot)
return -ENODEV;
nproot = of_find_node_by_name(nproot, "regulators");
@@ -388,6 +363,7 @@
break;
}
}
+ of_node_put(nproot);
return 0;
}
#else
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 551a22b..a5d97ea 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -91,6 +91,7 @@
config REGULATOR_ARIZONA
tristate "Wolfson Arizona class devices"
depends on MFD_ARIZONA
+ depends on SND_SOC
help
Support for the regulators found on Wolfson Arizona class
devices.
@@ -277,6 +278,15 @@
help
This driver supports LP8720/LP8725 PMIC
+config REGULATOR_LP8755
+ tristate "TI LP8755 High Performance PMU driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports LP8755 High Performance PMU driver. This
+ chip contains six step-down DC/DC converters which can support
+ 9 mode multiphase configuration.
+
config REGULATOR_LP8788
bool "TI LP8788 Power Regulators"
depends on MFD_LP8788
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b802b0c..6e82503 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
+obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 8f39cac..0d4a8cc 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -31,12 +31,18 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
+#define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */
+#define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */
+
struct anatop_regulator {
const char *name;
u32 control_reg;
struct regmap *anatop;
int vol_bit_shift;
int vol_bit_width;
+ u32 delay_reg;
+ int delay_bit_shift;
+ int delay_bit_width;
int min_bit_val;
int min_voltage;
int max_voltage;
@@ -55,6 +61,32 @@
return regulator_set_voltage_sel_regmap(reg, selector);
}
+static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg,
+ unsigned int old_sel,
+ unsigned int new_sel)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ u32 val;
+ int ret = 0;
+
+ /* check whether need to care about LDO ramp up speed */
+ if (anatop_reg->delay_bit_width && new_sel > old_sel) {
+ /*
+ * the delay for LDO ramp up time is
+ * based on the register setting, we need
+ * to calculate how many steps LDO need to
+ * ramp up, and how much delay needed. (us)
+ */
+ regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val);
+ val = (val >> anatop_reg->delay_bit_shift) &
+ ((1 << anatop_reg->delay_bit_width) - 1);
+ ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES <<
+ val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1;
+ }
+
+ return ret;
+}
+
static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
@@ -67,6 +99,7 @@
static struct regulator_ops anatop_rops = {
.set_voltage_sel = anatop_regmap_set_voltage_sel,
+ .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel,
.get_voltage_sel = anatop_regmap_get_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -143,6 +176,14 @@
goto anatop_probe_end;
}
+ /* read LDO ramp up setting, only for core reg */
+ of_property_read_u32(np, "anatop-delay-reg-offset",
+ &sreg->delay_reg);
+ of_property_read_u32(np, "anatop-delay-bit-width",
+ &sreg->delay_bit_width);
+ of_property_read_u32(np, "anatop-delay-bit-shift",
+ &sreg->delay_bit_shift);
+
rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+ sreg->min_bit_val;
rdesc->min_uV = sreg->min_voltage;
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index a6d040c..e87536b 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -21,6 +21,8 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <sound/soc.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
@@ -34,6 +36,8 @@
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
+
+ struct work_struct check_cp_work;
};
static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
@@ -72,9 +76,73 @@
return selector;
}
+static void arizona_micsupp_check_cp(struct work_struct *work)
+{
+ struct arizona_micsupp *micsupp =
+ container_of(work, struct arizona_micsupp, check_cp_work);
+ struct snd_soc_dapm_context *dapm = micsupp->arizona->dapm;
+ struct arizona *arizona = micsupp->arizona;
+ struct regmap *regmap = arizona->regmap;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, ARIZONA_MIC_CHARGE_PUMP_1, ®);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read CP state: %d\n", ret);
+ return;
+ }
+
+ if (dapm) {
+ if ((reg & (ARIZONA_CPMIC_ENA | ARIZONA_CPMIC_BYPASS)) ==
+ ARIZONA_CPMIC_ENA)
+ snd_soc_dapm_force_enable_pin(dapm, "MICSUPP");
+ else
+ snd_soc_dapm_disable_pin(dapm, "MICSUPP");
+
+ snd_soc_dapm_sync(dapm);
+ }
+}
+
+static int arizona_micsupp_enable(struct regulator_dev *rdev)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_enable_regmap(rdev);
+
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
+static int arizona_micsupp_disable(struct regulator_dev *rdev)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_disable_regmap(rdev);
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
+static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_set_bypass_regmap(rdev, ena);
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
static struct regulator_ops arizona_micsupp_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
+ .enable = arizona_micsupp_enable,
+ .disable = arizona_micsupp_disable,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = arizona_micsupp_list_voltage,
@@ -84,7 +152,7 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_bypass = regulator_get_bypass_regmap,
- .set_bypass = regulator_set_bypass_regmap,
+ .set_bypass = arizona_micsupp_set_bypass,
};
static const struct regulator_desc arizona_micsupp = {
@@ -109,7 +177,8 @@
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_VOLTAGE,
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
.min_uV = 1700000,
.max_uV = 3300000,
},
@@ -131,6 +200,7 @@
}
micsupp->arizona = arizona;
+ INIT_WORK(&micsupp->check_cp_work, arizona_micsupp_check_cp);
/*
* Since the chip usually supplies itself we provide some
diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
index 2f1341d..f0ba8c4 100644
--- a/drivers/regulator/as3711-regulator.c
+++ b/drivers/regulator/as3711-regulator.c
@@ -303,7 +303,7 @@
reg_data = pdata ? pdata->init_data[id] : NULL;
/* No need to register if there is no regulator data */
- if (!ri->desc.name)
+ if (!reg_data)
continue;
reg = ®s[id];
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2785843..da9782b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -200,8 +200,8 @@
}
if (*min_uV > *max_uV) {
- dev_err(regulator->dev, "Restricting voltage, %u-%uuV\n",
- regulator->min_uV, regulator->max_uV);
+ rdev_err(rdev, "Restricting voltage, %u-%uuV\n",
+ *min_uV, *max_uV);
return -EINVAL;
}
@@ -2080,10 +2080,20 @@
*/
int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
{
+ int ret;
+
sel <<= ffs(rdev->desc->vsel_mask) - 1;
- return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
rdev->desc->vsel_mask, sel);
+ if (ret)
+ return ret;
+
+ if (rdev->desc->apply_bit)
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
@@ -2229,8 +2239,11 @@
best_val = rdev->desc->ops->list_voltage(rdev, ret);
if (min_uV <= best_val && max_uV >= best_val) {
selector = ret;
- ret = rdev->desc->ops->set_voltage_sel(rdev,
- ret);
+ if (old_selector == selector)
+ ret = 0;
+ else
+ ret = rdev->desc->ops->set_voltage_sel(
+ rdev, ret);
} else {
ret = -EINVAL;
}
@@ -2241,7 +2254,7 @@
/* Call set_voltage_time_sel if successfully obtained old_selector */
if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
- rdev->desc->ops->set_voltage_time_sel) {
+ old_selector != selector && rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
old_selector, selector);
@@ -2294,6 +2307,7 @@
{
struct regulator_dev *rdev = regulator->rdev;
int ret = 0;
+ int old_min_uV, old_max_uV;
mutex_lock(&rdev->mutex);
@@ -2315,18 +2329,29 @@
ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
if (ret < 0)
goto out;
+
+ /* restore original values in case of error */
+ old_min_uV = regulator->min_uV;
+ old_max_uV = regulator->max_uV;
regulator->min_uV = min_uV;
regulator->max_uV = max_uV;
ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
if (ret < 0)
- goto out;
+ goto out2;
ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
-
+ if (ret < 0)
+ goto out2;
+
out:
mutex_unlock(&rdev->mutex);
return ret;
+out2:
+ regulator->min_uV = old_min_uV;
+ regulator->max_uV = old_max_uV;
+ mutex_unlock(&rdev->mutex);
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage);
@@ -3208,7 +3233,7 @@
if (status < 0)
return status;
}
- if (ops->is_enabled) {
+ if (rdev->ena_gpio || ops->is_enabled) {
status = device_create_file(dev, &dev_attr_state);
if (status < 0)
return status;
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index d096309..96b569a 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -70,7 +70,6 @@
int step_uV;
int min_uV;
int max_uV;
- unsigned char activate_bit;
};
struct da9052_regulator {
@@ -210,36 +209,6 @@
return sel;
}
-static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev,
- unsigned int selector)
-{
- struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9052_regulator_info *info = regulator->info;
- int id = rdev_get_id(rdev);
- int ret;
-
- ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, selector);
- if (ret < 0)
- return ret;
-
- /* Some LDOs and DCDCs are DVC controlled which requires enabling of
- * the activate bit to implment the changes on the output.
- */
- switch (id) {
- case DA9052_ID_BUCK1:
- case DA9052_ID_BUCK2:
- case DA9052_ID_BUCK3:
- case DA9052_ID_LDO2:
- case DA9052_ID_LDO3:
- ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
- info->activate_bit, info->activate_bit);
- break;
- }
-
- return ret;
-}
-
static struct regulator_ops da9052_dcdc_ops = {
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
@@ -247,7 +216,7 @@
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -257,7 +226,7 @@
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -274,13 +243,14 @@
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
+ .apply_reg = DA9052_SUPPLY_REG, \
+ .apply_bit = (abits), \
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .activate_bit = (abits),\
}
#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \
@@ -294,13 +264,14 @@
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
+ .apply_reg = DA9052_SUPPLY_REG, \
+ .apply_bit = (abits), \
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .activate_bit = (abits),\
}
static struct da9052_regulator_info da9052_regulator_info[] = {
@@ -395,9 +366,9 @@
config.init_data = pdata->regulators[pdev->id];
} else {
#ifdef CONFIG_OF
- struct device_node *nproot = da9052->dev->of_node;
- struct device_node *np;
+ struct device_node *nproot, *np;
+ nproot = of_node_get(da9052->dev->of_node);
if (!nproot)
return -ENODEV;
@@ -414,6 +385,7 @@
break;
}
}
+ of_node_put(nproot);
#endif
}
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 1a05ac6..3022109 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -58,7 +58,6 @@
int reg_b;
int sl_shift;
int v_mask;
- int v_shift;
};
struct da9055_mode_reg {
@@ -388,7 +387,6 @@
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
- .v_shift = (vbits),\
},\
}
@@ -417,7 +415,6 @@
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
- .v_shift = (vbits),\
},\
.mode = {\
.reg = DA9055_REG_BCORE_MODE,\
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index bae681c..9d39eb4 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -132,7 +132,7 @@
.list_voltage = gpio_regulator_list_voltage,
};
-struct gpio_regulator_config *
+static struct gpio_regulator_config *
of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
{
struct gpio_regulator_config *config;
@@ -163,10 +163,7 @@
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
/* Fetch GPIOs. */
- for (i = 0; ; i++)
- if (of_get_named_gpio(np, "gpios", i) < 0)
- break;
- config->nr_gpios = i;
+ config->nr_gpios = of_gpio_count(np);
config->gpios = devm_kzalloc(dev,
sizeof(struct gpio) * config->nr_gpios,
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 5f68ff1..9cb2c0f 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -73,8 +73,6 @@
};
#define BUCK_TARGET_VOL_MASK 0x3f
-#define BUCK_TARGET_VOL_MIN_IDX 0x01
-#define BUCK_TARGET_VOL_MAX_IDX 0x19
#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
@@ -140,7 +138,7 @@
return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
}
-static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3971_LDO1;
@@ -149,7 +147,7 @@
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return dev->desc->volt_table[val];
+ return val;
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -168,7 +166,7 @@
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
- .get_voltage = lp3971_ldo_get_voltage,
+ .get_voltage_sel = lp3971_ldo_get_voltage_sel,
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
@@ -201,24 +199,16 @@
return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
}
-static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3971_DCDC1;
u16 reg;
- int val;
reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
reg &= BUCK_TARGET_VOL_MASK;
- if (reg <= BUCK_TARGET_VOL_MAX_IDX)
- val = buck_voltage_map[reg];
- else {
- val = 0;
- dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
- }
-
- return val;
+ return reg;
}
static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -249,7 +239,7 @@
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
- .get_voltage = lp3971_dcdc_get_voltage,
+ .get_voltage_sel = lp3971_dcdc_get_voltage_sel,
.set_voltage_sel = lp3971_dcdc_set_voltage_sel,
};
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 69c42c3..0baabcf 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -165,8 +165,6 @@
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
-#define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00)
-#define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f)
static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
u16 *dest)
@@ -257,7 +255,7 @@
mask, 0);
}
-static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
@@ -267,7 +265,7 @@
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
- return dev->desc->volt_table[val];
+ return val;
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -314,7 +312,7 @@
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
- .get_voltage = lp3972_ldo_get_voltage,
+ .get_voltage_sel = lp3972_ldo_get_voltage_sel,
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
@@ -353,24 +351,16 @@
return val;
}
-static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 reg;
- int val;
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
- if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
- val = dev->desc->volt_table[reg];
- else {
- val = 0;
- dev_warn(&dev->dev, "chip reported incorrect voltage value."
- " reg = %d\n", reg);
- }
- return val;
+ return reg;
}
static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -402,7 +392,7 @@
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
- .get_voltage = lp3972_dcdc_get_voltage,
+ .get_voltage_sel = lp3972_dcdc_get_voltage_sel,
.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
};
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 9289ead..8e3c7ae 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -181,20 +181,6 @@
return regmap_update_bits(lp->regmap, addr, mask, data);
}
-static int _rdev_to_offset(struct regulator_dev *rdev)
-{
- enum lp872x_regulator_id id = rdev_get_id(rdev);
-
- switch (id) {
- case LP8720_ID_LDO1 ... LP8720_ID_BUCK:
- return id;
- case LP8725_ID_LDO1 ... LP8725_ID_BUCK2:
- return id - LP8725_ID_BASE;
- default:
- return -EINVAL;
- }
-}
-
static int lp872x_get_timestep_usec(struct lp872x *lp)
{
enum lp872x_id chip = lp->chipid;
@@ -234,28 +220,20 @@
static int lp872x_regulator_enable_time(struct regulator_dev *rdev)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
- enum lp872x_regulator_id regulator = rdev_get_id(rdev);
+ enum lp872x_regulator_id rid = rdev_get_id(rdev);
int time_step_us = lp872x_get_timestep_usec(lp);
- int ret, offset;
+ int ret;
u8 addr, val;
if (time_step_us < 0)
return -EINVAL;
- switch (regulator) {
- case LP8720_ID_LDO1 ... LP8720_ID_LDO5:
- case LP8725_ID_LDO1 ... LP8725_ID_LILO2:
- offset = _rdev_to_offset(rdev);
- if (offset < 0)
- return -EINVAL;
-
- addr = LP872X_LDO1_VOUT + offset;
+ switch (rid) {
+ case LP8720_ID_LDO1 ... LP8720_ID_BUCK:
+ addr = LP872X_LDO1_VOUT + rid;
break;
- case LP8720_ID_BUCK:
- addr = LP8720_BUCK_VOUT1;
- break;
- case LP8725_ID_BUCK1:
- addr = LP8725_BUCK1_VOUT1;
+ case LP8725_ID_LDO1 ... LP8725_ID_BUCK1:
+ addr = LP872X_LDO1_VOUT + rid - LP8725_ID_BASE;
break;
case LP8725_ID_BUCK2:
addr = LP8725_BUCK2_VOUT1;
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
new file mode 100644
index 0000000..f0f6ea0
--- /dev/null
+++ b/drivers/regulator/lp8755.c
@@ -0,0 +1,566 @@
+/*
+ * LP8755 High Performance Power Management Unit : System Interface Driver
+ * (based on rev. 0.26)
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/lp8755.h>
+
+#define LP8755_REG_BUCK0 0x00
+#define LP8755_REG_BUCK1 0x03
+#define LP8755_REG_BUCK2 0x04
+#define LP8755_REG_BUCK3 0x01
+#define LP8755_REG_BUCK4 0x05
+#define LP8755_REG_BUCK5 0x02
+#define LP8755_REG_MAX 0xFF
+
+#define LP8755_BUCK_EN_M BIT(7)
+#define LP8755_BUCK_LINEAR_OUT_MAX 0x76
+#define LP8755_BUCK_VOUT_M 0x7F
+
+struct lp8755_mphase {
+ int nreg;
+ int buck_num[LP8755_BUCK_MAX];
+};
+
+struct lp8755_chip {
+ struct device *dev;
+ struct regmap *regmap;
+ struct lp8755_platform_data *pdata;
+
+ int irq;
+ unsigned int irqmask;
+
+ int mphase;
+ struct regulator_dev *rdev[LP8755_BUCK_MAX];
+};
+
+/**
+ *lp8755_read : read a single register value from lp8755.
+ *@pchip : device to read from
+ *@reg : register to read from
+ *@val : pointer to store read value
+ */
+static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int *val)
+{
+ return regmap_read(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_write : write a single register value to lp8755.
+ *@pchip : device to write to
+ *@reg : register to write to
+ *@val : value to be written
+ */
+static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int val)
+{
+ return regmap_write(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_update_bits : set the values of bit fields in lp8755 register.
+ *@pchip : device to read from
+ *@reg : register to update
+ *@mask : bitmask to be changed
+ *@val : value for bitmask
+ */
+static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ return regmap_update_bits(pchip->regmap, reg, mask, val);
+}
+
+static int lp8755_buck_enable_time(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x12 + id, ®val);
+ if (ret < 0) {
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+ }
+ return (regval & 0xff) * 100;
+}
+
+static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret;
+ unsigned int regbval = 0x0;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ /* enable automatic pwm/pfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ case REGULATOR_MODE_IDLE:
+ /* enable automatic pwm/pfm/lppfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20);
+ if (ret < 0)
+ goto err_i2c;
+
+ ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ default:
+ dev_err(pchip->dev, "Not supported buck mode %s\n", __func__);
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ }
+
+ ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x06, ®val);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode fast means forced pwm mode */
+ if (regval & (0x01 << id))
+ return REGULATOR_MODE_FAST;
+
+ ret = lp8755_read(pchip, 0x08 + id, ®val);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode idle means automatic pwm/pfm/lppfm mode */
+ if (regval & 0x20)
+ return REGULATOR_MODE_IDLE;
+
+ /* mode normal means automatic pwm/pfm mode */
+ return REGULATOR_MODE_NORMAL;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return 0;
+}
+
+static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
+{
+ int ret;
+ unsigned int regval = 0x00;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ /* uV/us */
+ switch (ramp) {
+ case 0 ... 230:
+ regval = 0x07;
+ break;
+ case 231 ... 470:
+ regval = 0x06;
+ break;
+ case 471 ... 940:
+ regval = 0x05;
+ break;
+ case 941 ... 1900:
+ regval = 0x04;
+ break;
+ case 1901 ... 3800:
+ regval = 0x03;
+ break;
+ case 3801 ... 7500:
+ regval = 0x02;
+ break;
+ case 7501 ... 15000:
+ regval = 0x01;
+ break;
+ case 15001 ... 30000:
+ regval = 0x00;
+ break;
+ default:
+ dev_err(pchip->dev,
+ "Not supported ramp value %d %s\n", ramp, __func__);
+ return -EINVAL;
+ }
+
+ ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static struct regulator_ops lp8755_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp8755_buck_enable_time,
+ .set_mode = lp8755_buck_set_mode,
+ .get_mode = lp8755_buck_get_mode,
+ .set_ramp_delay = lp8755_buck_set_ramp,
+};
+
+#define lp8755_rail(_id) "lp8755_buck"#_id
+#define lp8755_buck_init(_id)\
+{\
+ .constraints = {\
+ .name = lp8755_rail(_id),\
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\
+ .min_uV = 500000,\
+ .max_uV = 1675000,\
+ },\
+}
+
+static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = {
+ [LP8755_BUCK0] = lp8755_buck_init(0),
+ [LP8755_BUCK1] = lp8755_buck_init(1),
+ [LP8755_BUCK2] = lp8755_buck_init(2),
+ [LP8755_BUCK3] = lp8755_buck_init(3),
+ [LP8755_BUCK4] = lp8755_buck_init(4),
+ [LP8755_BUCK5] = lp8755_buck_init(5),
+};
+
+static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = {
+ { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } },
+ { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3,
+ LP8755_BUCK4, LP8755_BUCK5 } },
+ { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4,
+ LP8755_BUCK5} },
+ { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} },
+ { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} },
+ { 2, { LP8755_BUCK0, LP8755_BUCK5} },
+ { 1, { LP8755_BUCK0} },
+ { 2, { LP8755_BUCK0, LP8755_BUCK3} },
+ { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} },
+};
+
+static int lp8755_init_data(struct lp8755_chip *pchip)
+{
+ unsigned int regval;
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+
+ /* read back muti-phase configuration */
+ ret = lp8755_read(pchip, 0x3D, ®val);
+ if (ret < 0)
+ goto out_i2c_error;
+ pchip->mphase = regval & 0x0F;
+
+ /* set default data based on multi-phase config */
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num];
+ }
+ return ret;
+
+out_i2c_error:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+#define lp8755_buck_desc(_id)\
+{\
+ .name = lp8755_rail(_id),\
+ .id = LP8755_BUCK##_id,\
+ .ops = &lp8755_buck_ops,\
+ .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\
+ .uV_step = 10000,\
+ .min_uV = 500000,\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .enable_reg = LP8755_REG_BUCK##_id,\
+ .enable_mask = LP8755_BUCK_EN_M,\
+ .vsel_reg = LP8755_REG_BUCK##_id,\
+ .vsel_mask = LP8755_BUCK_VOUT_M,\
+}
+
+static struct regulator_desc lp8755_regulators[] = {
+ lp8755_buck_desc(0),
+ lp8755_buck_desc(1),
+ lp8755_buck_desc(2),
+ lp8755_buck_desc(3),
+ lp8755_buck_desc(4),
+ lp8755_buck_desc(5),
+};
+
+static int lp8755_regulator_init(struct lp8755_chip *pchip)
+{
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+ struct regulator_config rconfig = { };
+
+ rconfig.regmap = pchip->regmap;
+ rconfig.dev = pchip->dev;
+ rconfig.driver_data = pchip;
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ rconfig.init_data = pdata->buck_data[buck_num];
+ rconfig.of_node = pchip->dev->of_node;
+ pchip->rdev[buck_num] =
+ regulator_register(&lp8755_regulators[buck_num], &rconfig);
+ if (IS_ERR(pchip->rdev[buck_num])) {
+ ret = PTR_ERR(pchip->rdev[buck_num]);
+ pchip->rdev[buck_num] = NULL;
+ dev_err(pchip->dev, "regulator init failed: buck %d\n",
+ buck_num);
+ goto err_buck;
+ }
+ }
+
+ return 0;
+
+err_buck:
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+ return ret;
+}
+
+static irqreturn_t lp8755_irq_handler(int irq, void *data)
+{
+ int ret, icnt;
+ unsigned int flag0, flag1;
+ struct lp8755_chip *pchip = data;
+
+ /* read flag0 register */
+ ret = lp8755_read(pchip, 0x0D, &flag0);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0D, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* sent power fault detection event to specific regulator */
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if ((flag0 & (0x4 << icnt))
+ && (pchip->irqmask & (0x04 << icnt))
+ && (pchip->rdev[icnt] != NULL))
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_PWR_FAULT,
+ NULL);
+
+ /* read flag1 register */
+ ret = lp8755_read(pchip, 0x0E, &flag1);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0E, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* send OCP event to all regualtor devices */
+ if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OCP,
+ NULL);
+
+ /* send OVP event to all regualtor devices */
+ if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OVP,
+ NULL);
+ return IRQ_HANDLED;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return IRQ_NONE;
+}
+
+static int lp8755_int_config(struct lp8755_chip *pchip)
+{
+ int ret;
+ unsigned int regval;
+
+ if (pchip->irq == 0) {
+ dev_warn(pchip->dev, "not use interrupt : %s\n", __func__);
+ return 0;
+ }
+
+ ret = lp8755_read(pchip, 0x0F, ®val);
+ if (ret < 0)
+ goto err_i2c;
+ pchip->irqmask = regval;
+ ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lp8755-irq", pchip);
+ if (ret)
+ return ret;
+
+ return ret;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static const struct regmap_config lp8755_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP8755_REG_MAX,
+};
+
+static int lp8755_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret, icnt;
+ struct lp8755_chip *pchip;
+ struct lp8755_platform_data *pdata = client->dev.platform_data;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c functionality check fail.\n");
+ return -EOPNOTSUPP;
+ }
+
+ pchip = devm_kzalloc(&client->dev,
+ sizeof(struct lp8755_chip), GFP_KERNEL);
+ if (!pchip)
+ return -ENOMEM;
+
+ pchip->dev = &client->dev;
+ pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap);
+ if (IS_ERR(pchip->regmap)) {
+ ret = PTR_ERR(pchip->regmap);
+ dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
+ return ret;
+ }
+ i2c_set_clientdata(client, pchip);
+
+ if (pdata != NULL) {
+ pchip->pdata = pdata;
+ pchip->mphase = pdata->mphase;
+ } else {
+ pchip->pdata = devm_kzalloc(pchip->dev,
+ sizeof(struct lp8755_platform_data),
+ GFP_KERNEL);
+ if (!pchip->pdata)
+ return -ENOMEM;
+ ret = lp8755_init_data(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to initialize chip\n");
+ return ret;
+ }
+ }
+
+ ret = lp8755_regulator_init(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to initialize regulators\n");
+ goto err_regulator;
+ }
+
+ pchip->irq = client->irq;
+ ret = lp8755_int_config(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to irq config\n");
+ goto err_irq;
+ }
+
+ return ret;
+
+err_irq:
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+err_regulator:
+ /* output disable */
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+ return ret;
+}
+
+static int lp8755_remove(struct i2c_client *client)
+{
+ int icnt;
+ struct lp8755_chip *pchip = i2c_get_clientdata(client);
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+ if (pchip->irq != 0)
+ free_irq(pchip->irq, pchip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8755_id[] = {
+ {LP8755_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp8755_id);
+
+static struct i2c_driver lp8755_i2c_driver = {
+ .driver = {
+ .name = LP8755_NAME,
+ },
+ .probe = lp8755_probe,
+ .remove = lp8755_remove,
+ .id_table = lp8755_id,
+};
+
+static int __init lp8755_init(void)
+{
+ return i2c_add_driver(&lp8755_i2c_driver);
+}
+
+subsys_initcall(lp8755_init);
+
+static void __exit lp8755_exit(void)
+{
+ i2c_del_driver(&lp8755_i2c_driver);
+}
+
+module_exit(lp8755_exit);
+
+MODULE_DESCRIPTION("Texas Instruments lp8755 driver");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index aef3f2b..97891a7 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -103,16 +103,6 @@
1950000, 2000000,
};
-static const u8 buck1_vout_addr[] = {
- LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1,
- LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3,
-};
-
-static const u8 buck2_vout_addr[] = {
- LP8788_BUCK2_VOUT0, LP8788_BUCK2_VOUT1,
- LP8788_BUCK2_VOUT2, LP8788_BUCK2_VOUT3,
-};
-
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
@@ -235,7 +225,7 @@
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
}
- addr = buck1_vout_addr[idx];
+ addr = LP8788_BUCK1_VOUT0 + idx;
break;
case BUCK2:
if (mode == EXTPIN) {
@@ -258,7 +248,7 @@
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
}
- addr = buck2_vout_addr[idx];
+ addr = LP8788_BUCK2_VOUT0 + idx;
break;
default:
goto err;
@@ -429,7 +419,8 @@
},
};
-static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
+static int lp8788_dvs_gpio_request(struct platform_device *pdev,
+ struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
@@ -440,7 +431,7 @@
switch (id) {
case BUCK1:
gpio = pdata->buck1_dvs->gpio;
- ret = devm_gpio_request_one(buck->lp->dev, gpio, DVS_LOW,
+ ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
b1_name);
if (ret)
return ret;
@@ -448,9 +439,9 @@
buck->dvs = pdata->buck1_dvs;
break;
case BUCK2:
- for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) {
+ for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
gpio = pdata->buck2_dvs->gpio[i];
- ret = devm_gpio_request_one(buck->lp->dev, gpio,
+ ret = devm_gpio_request_one(&pdev->dev, gpio,
DVS_LOW, b2_name[i]);
if (ret)
return ret;
@@ -464,7 +455,8 @@
return 0;
}
-static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
+static int lp8788_init_dvs(struct platform_device *pdev,
+ struct lp8788_buck *buck, enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
@@ -472,7 +464,7 @@
u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
/* no dvs for buck3, 4 */
- if (id == BUCK3 || id == BUCK4)
+ if (id > BUCK2)
return 0;
/* no dvs platform data, then dvs will be selected by I2C registers */
@@ -483,7 +475,7 @@
(id == BUCK2 && !pdata->buck2_dvs))
goto set_default_dvs_mode;
- if (lp8788_dvs_gpio_request(buck, id))
+ if (lp8788_dvs_gpio_request(pdev, buck, id))
goto set_default_dvs_mode;
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
@@ -503,17 +495,20 @@
struct regulator_dev *rdev;
int ret;
- buck = devm_kzalloc(lp->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
+ if (id >= LP8788_NUM_BUCKS)
+ return -EINVAL;
+
+ buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
if (!buck)
return -ENOMEM;
buck->lp = lp;
- ret = lp8788_init_dvs(buck, id);
+ ret = lp8788_init_dvs(pdev, buck, id);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
cfg.driver_data = buck;
cfg.regmap = lp->regmap;
@@ -521,7 +516,7 @@
rdev = regulator_register(&lp8788_buck_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "BUCK%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index 3792741..cd5a14a 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -88,11 +88,6 @@
#define ENABLE GPIOF_OUT_INIT_HIGH
#define DISABLE GPIOF_OUT_INIT_LOW
-enum lp8788_enable_mode {
- REGISTER,
- EXTPIN,
-};
-
enum lp8788_ldo_id {
DLDO1,
DLDO2,
@@ -189,114 +184,38 @@
ALDO10,
};
-/* DLDO 7, 9 and 11, ALDO 1 ~ 5 and 7
- : can be enabled either by external pin or by i2c register */
-static enum lp8788_enable_mode
-lp8788_get_ldo_enable_mode(struct lp8788_ldo *ldo, enum lp8788_ldo_id id)
-{
- int ret;
- u8 val, mask;
-
- ret = lp8788_read_byte(ldo->lp, LP8788_EN_SEL, &val);
- if (ret)
- return ret;
-
- switch (id) {
- case DLDO7:
- mask = LP8788_EN_SEL_DLDO7_M;
- break;
- case DLDO9:
- case DLDO11:
- mask = LP8788_EN_SEL_DLDO911_M;
- break;
- case ALDO1:
- mask = LP8788_EN_SEL_ALDO1_M;
- break;
- case ALDO2 ... ALDO4:
- mask = LP8788_EN_SEL_ALDO234_M;
- break;
- case ALDO5:
- mask = LP8788_EN_SEL_ALDO5_M;
- break;
- case ALDO7:
- mask = LP8788_EN_SEL_ALDO7_M;
- break;
- default:
- return REGISTER;
- }
-
- return val & mask ? EXTPIN : REGISTER;
-}
-
-static int lp8788_ldo_ctrl_by_extern_pin(struct lp8788_ldo *ldo, int pinstate)
-{
- struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
-
- if (!pin)
- return -EINVAL;
-
- if (gpio_is_valid(pin->gpio))
- gpio_set_value(pin->gpio, pinstate);
-
- return 0;
-}
-
-static int lp8788_ldo_is_enabled_by_extern_pin(struct lp8788_ldo *ldo)
-{
- struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
-
- if (!pin)
- return -EINVAL;
-
- return gpio_get_value(pin->gpio) ? 1 : 0;
-}
-
static int lp8788_ldo_enable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_ctrl_by_extern_pin(ldo, ENABLE);
- case REGISTER:
+ if (ldo->en_pin) {
+ gpio_set_value(ldo->en_pin->gpio, ENABLE);
+ return 0;
+ } else {
return regulator_enable_regmap(rdev);
- default:
- return -EINVAL;
}
}
static int lp8788_ldo_disable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_ctrl_by_extern_pin(ldo, DISABLE);
- case REGISTER:
+ if (ldo->en_pin) {
+ gpio_set_value(ldo->en_pin->gpio, DISABLE);
+ return 0;
+ } else {
return regulator_disable_regmap(rdev);
- default:
- return -EINVAL;
}
}
static int lp8788_ldo_is_enabled(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_is_enabled_by_extern_pin(ldo);
- case REGISTER:
+ if (ldo->en_pin)
+ return gpio_get_value(ldo->en_pin->gpio) ? 1 : 0;
+ else
return regulator_is_enabled_regmap(rdev);
- default:
- return -EINVAL;
- }
}
static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
@@ -616,10 +535,11 @@
},
};
-static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo,
+static int lp8788_gpio_request_ldo_en(struct platform_device *pdev,
+ struct lp8788_ldo *ldo,
enum lp8788_ext_ldo_en_id id)
{
- struct device *dev = ldo->lp->dev;
+ struct device *dev = &pdev->dev;
struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
int ret, gpio, pinstate;
char *name[] = {
@@ -647,7 +567,8 @@
return ret;
}
-static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
+static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
+ struct lp8788_ldo *ldo,
enum lp8788_ldo_id id)
{
int ret;
@@ -693,9 +614,11 @@
ldo->en_pin = pdata->ldo_pin[enable_id];
- ret = lp8788_gpio_request_ldo_en(ldo, enable_id);
- if (ret)
+ ret = lp8788_gpio_request_ldo_en(pdev, ldo, enable_id);
+ if (ret) {
+ ldo->en_pin = NULL;
goto set_default_ldo_enable_mode;
+ }
return ret;
@@ -712,16 +635,16 @@
struct regulator_dev *rdev;
int ret;
- ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
- ret = lp8788_config_ldo_enable_mode(ldo, lp8788_dldo_id[id]);
+ ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_dldo_id[id]);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
@@ -729,7 +652,7 @@
rdev = regulator_register(&lp8788_dldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "DLDO%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
@@ -768,16 +691,16 @@
struct regulator_dev *rdev;
int ret;
- ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
- ret = lp8788_config_ldo_enable_mode(ldo, lp8788_aldo_id[id]);
+ ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_aldo_id[id]);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
@@ -785,7 +708,7 @@
rdev = regulator_register(&lp8788_aldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "ALDO%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index cca18a3c..e4586ee 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -75,13 +75,14 @@
{
unsigned int val;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
- if (rdev->desc->id == MAX77686_BUCK1)
+ if (id == MAX77686_BUCK1)
val = 0x1;
else
val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -93,9 +94,10 @@
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
unsigned int val;
+ int id = rdev_get_id(rdev);
/* BUCK[5-9] doesn't support this feature */
- if (rdev->desc->id >= MAX77686_BUCK5)
+ if (id >= MAX77686_BUCK5)
return 0;
switch (mode) {
@@ -111,7 +113,7 @@
return -EINVAL;
}
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -140,7 +142,7 @@
return -EINVAL;
}
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[rdev_get_id(rdev)] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -152,7 +154,7 @@
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
- max77686->opmode[rdev->desc->id]);
+ max77686->opmode[rdev_get_id(rdev)]);
}
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index d40cf7f..4568c15 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -224,11 +224,11 @@
static int max8907_regulator_parse_dt(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.parent->of_node;
- struct device_node *regulators;
+ struct device_node *np, *regulators;
int ret;
- if (!pdev->dev.parent->of_node)
+ np = of_node_get(pdev->dev.parent->of_node);
+ if (!np)
return 0;
regulators = of_find_node_by_name(np, "regulators");
@@ -239,6 +239,7 @@
ret = of_regulator_match(&pdev->dev, regulators, max8907_matches,
ARRAY_SIZE(max8907_matches));
+ of_node_put(regulators);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
ret);
diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c
index 446a854..0d5f64a 100644
--- a/drivers/regulator/max8925-regulator.c
+++ b/drivers/regulator/max8925-regulator.c
@@ -252,7 +252,7 @@
{
struct device_node *nproot, *np;
int rcount;
- nproot = pdev->dev.parent->of_node;
+ nproot = of_node_get(pdev->dev.parent->of_node);
if (!nproot)
return -ENODEV;
np = of_find_node_by_name(nproot, "regulators");
@@ -263,6 +263,7 @@
rcount = of_regulator_match(&pdev->dev, np,
&max8925_regulator_matches[ridx], 1);
+ of_node_put(np);
if (rcount < 0)
return -ENODEV;
config->init_data = max8925_regulator_matches[ridx].init_data;
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 836908c..0ac7a87 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -54,6 +54,13 @@
u8 saved_states[MAX8997_REG_MAX];
};
+static const unsigned int safeoutvolt[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
static inline void max8997_set_gpio(struct max8997_data *max8997)
{
int set3 = (max8997->buck125_gpioindex) & 0x1;
@@ -130,29 +137,6 @@
[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
};
-static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
- unsigned int selector)
-{
- int rid = rdev_get_id(rdev);
-
- if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
- switch (selector) {
- case 0:
- return 4850000;
- case 1:
- return 4900000;
- case 2:
- return 4950000;
- case 3:
- return 3300000;
- default:
- return -EINVAL;
- }
- }
-
- return -EINVAL;
-}
-
static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
unsigned int selector)
{
@@ -522,7 +506,7 @@
return ret;
}
-static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
+static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
@@ -720,49 +704,23 @@
return 0;
}
-static const int safeoutvolt[] = {
- 3300000,
- 4850000,
- 4900000,
- 4950000,
-};
-
/* For SAFEOUT1 and SAFEOUT2 */
-static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
- int i = 0;
- u8 val;
if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
- if (min_uV <= safeoutvolt[i] &&
- max_uV >= safeoutvolt[i])
- break;
- }
-
- if (i >= ARRAY_SIZE(safeoutvolt))
- return -EINVAL;
-
- if (i == 0)
- val = 0x3;
- else
- val = i - 1;
-
ret = max8997_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
- ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
- *selector = val;
-
- return ret;
+ return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
}
static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
@@ -799,7 +757,6 @@
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_ldobuck,
- .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -810,7 +767,7 @@
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_buck,
- .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
+ .set_voltage_time_sel = max8997_set_voltage_buck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -823,12 +780,12 @@
};
static struct regulator_ops max8997_safeout_ops = {
- .list_voltage = max8997_list_voltage_safeout,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
- .set_voltage = max8997_set_voltage_safeout,
+ .set_voltage_sel = max8997_set_voltage_safeout_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -960,7 +917,7 @@
struct max8997_regulator_data *rdata;
unsigned int i, dvs_voltage_nr = 1, ret;
- pmic_np = iodev->dev->of_node;
+ pmic_np = of_node_get(iodev->dev->of_node);
if (!pmic_np) {
dev_err(&pdev->dev, "could not find pmic sub-node\n");
return -ENODEV;
@@ -973,13 +930,12 @@
}
/* count the number of regulators to be supported in pmic */
- pdata->num_regulators = 0;
- for_each_child_of_node(regulators_np, reg_np)
- pdata->num_regulators++;
+ pdata->num_regulators = of_get_child_count(regulators_np);
rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
pdata->num_regulators, GFP_KERNEL);
if (!rdata) {
+ of_node_put(regulators_np);
dev_err(&pdev->dev, "could not allocate memory for regulator data\n");
return -ENOMEM;
}
@@ -1002,6 +958,7 @@
rdata->reg_node = reg_np;
rdata++;
}
+ of_node_put(regulators_np);
if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
pdata->buck1_gpiodvs = true;
@@ -1233,13 +1190,15 @@
int id = pdata->regulators[i].id;
desc = reg_voltage_map[id];
- if (desc)
+ if (desc) {
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
- else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
- regulators[id].n_voltages = 4;
- else if (id == MAX8997_CHARGER_CV)
+ } else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) {
+ regulators[id].volt_table = safeoutvolt;
+ regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt);
+ } else if (id == MAX8997_CHARGER_CV) {
regulators[id].n_voltages = 16;
+ }
config.dev = max8997->dev;
config.init_data = pdata->regulators[i].initdata;
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 0a8dd1c..b588f07 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -311,25 +311,13 @@
dev_get_platdata(max8998->iodev->dev);
struct i2c_client *i2c = max8998->iodev->i2c;
int buck = rdev_get_id(rdev);
- int reg, shift = 0, mask, ret;
- int j, previous_sel;
+ int reg, shift = 0, mask, ret, j;
static u8 buck1_last_val;
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
- previous_sel = max8998_get_voltage_sel(rdev);
-
- /* Check if voltage needs to be changed */
- /* if previous_voltage equal new voltage, return */
- if (previous_sel == selector) {
- dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
- regulator_list_voltage_linear(rdev, previous_sel),
- regulator_list_voltage_linear(rdev, selector));
- return ret;
- }
-
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 0d84b1f..9891aec 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -164,6 +164,14 @@
1350000, 1375000
};
+/*
+ * Note: this table is used to derive SWxVSEL by index into
+ * the array. Offset the values by the index of 1100000uV
+ * to get the actual register value for that voltage selector
+ * if the HI bit is to be set as well.
+ */
+#define MC13892_SWxHI_SEL_OFFSET 20
+
static const unsigned int mc13892_sw[] = {
600000, 625000, 650000, 675000, 700000, 725000,
750000, 775000, 800000, 825000, 850000, 875000,
@@ -239,7 +247,6 @@
};
static struct regulator_ops mc13892_gpo_regulator_ops;
-/* sw regulators need special care due to the "hi bit" */
static struct regulator_ops mc13892_sw_regulator_ops;
@@ -396,7 +403,7 @@
{
struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
- unsigned int val;
+ unsigned int val, selector;
dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
@@ -407,12 +414,28 @@
if (ret)
return ret;
- val = (val & mc13892_regulators[id].vsel_mask)
- >> mc13892_regulators[id].vsel_shift;
+ /*
+ * Figure out if the HI bit is set inside the switcher mode register
+ * since this means the selector value we return is at a different
+ * offset into the selector table.
+ *
+ * According to the MC13892 documentation note 59 (Table 47) the SW1
+ * buck switcher does not support output range programming therefore
+ * the HI bit must always remain 0. So do not do anything strange if
+ * our register is MC13892_SWITCHERS0.
+ */
- dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val);
+ selector = val & mc13892_regulators[id].vsel_mask;
- return val;
+ if ((mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) &&
+ (val & MC13892_SWITCHERS0_SWxHI)) {
+ selector += MC13892_SWxHI_SEL_OFFSET;
+ }
+
+ dev_dbg(rdev_get_dev(rdev), "%s id: %d val: 0x%08x selector: %d\n",
+ __func__, id, val, selector);
+
+ return selector;
}
static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
@@ -425,18 +448,35 @@
volt = rdev->desc->volt_table[selector];
mask = mc13892_regulators[id].vsel_mask;
- reg_value = selector << mc13892_regulators[id].vsel_shift;
+ reg_value = selector;
- if (volt > 1375000) {
- mask |= MC13892_SWITCHERS0_SWxHI;
- reg_value |= MC13892_SWITCHERS0_SWxHI;
- } else if (volt < 1100000) {
- mask |= MC13892_SWITCHERS0_SWxHI;
- reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+ /*
+ * Don't mess with the HI bit or support HI voltage offsets for SW1.
+ *
+ * Since the get_voltage_sel callback has given a fudged value for
+ * the selector offset, we need to back out that offset if HI is
+ * to be set so we write the correct value to the register.
+ *
+ * The HI bit addition and selector offset handling COULD be more
+ * complicated by shifting and masking off the voltage selector part
+ * of the register then logical OR it back in, but since the selector
+ * is at bits 4:0 there is very little point. This makes the whole
+ * thing more readable and we do far less work.
+ */
+
+ if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) {
+ if (volt > 1375000) {
+ reg_value -= MC13892_SWxHI_SEL_OFFSET;
+ reg_value |= MC13892_SWITCHERS0_SWxHI;
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ } else if (volt < 1100000) {
+ reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ }
}
mc13xxx_lock(priv->mc13xxx);
- ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask,
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask,
reg_value);
mc13xxx_unlock(priv->mc13xxx);
@@ -495,15 +535,18 @@
struct mc13xxx_regulator_init_data *mc13xxx_data;
struct regulator_config config = { };
int i, ret;
- int num_regulators = 0;
+ int num_regulators = 0, num_parsed;
u32 val;
num_regulators = mc13xxx_get_num_regulators_dt(pdev);
+
if (num_regulators <= 0 && pdata)
num_regulators = pdata->num_regulators;
if (num_regulators <= 0)
return -EINVAL;
+ num_parsed = num_regulators;
+
priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
num_regulators * sizeof(priv->regulators[0]),
GFP_KERNEL);
@@ -520,7 +563,7 @@
if (ret)
goto err_unlock;
- /* enable switch auto mode */
+ /* enable switch auto mode (on 2.0A silicon only) */
if ((val & 0x0000FFFF) == 0x45d0) {
ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4,
MC13892_SWITCHERS4_SW1MODE_M |
@@ -546,7 +589,39 @@
= mc13892_vcam_get_mode;
mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators,
- ARRAY_SIZE(mc13892_regulators));
+ ARRAY_SIZE(mc13892_regulators),
+ &num_parsed);
+
+ /*
+ * Perform a little sanity check on the regulator tree - if we found
+ * a number of regulators from mc13xxx_get_num_regulators_dt and
+ * then parsed a smaller number in mc13xxx_parse_regulators_dt then
+ * there is a regulator defined in the regulators node which has
+ * not matched any usable regulator in the driver. In this case,
+ * there is one missing and what will happen is the first regulator
+ * will get registered again.
+ *
+ * Fix this by basically making our number of registerable regulators
+ * equal to the number of regulators we parsed. We are allocating
+ * too much memory for priv, but this is unavoidable at this point.
+ *
+ * As an example of how this can happen, try making a typo in your
+ * regulators node (vviohi {} instead of viohi {}) so that the name
+ * does not match..
+ *
+ * The check will basically pass for platform data (non-DT) because
+ * mc13xxx_parse_regulators_dt for !CONFIG_OF will not touch num_parsed.
+ *
+ */
+ if (num_parsed != num_regulators) {
+ dev_warn(&pdev->dev,
+ "parsed %d != regulators %d - check your device tree!\n",
+ num_parsed, num_regulators);
+
+ num_regulators = num_parsed;
+ priv->num_regulators = num_regulators;
+ }
+
for (i = 0; i < num_regulators; i++) {
struct regulator_init_data *init_data;
struct regulator_desc *desc;
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 4ed89c6..23cf9f9 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -164,29 +164,30 @@
#ifdef CONFIG_OF
int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
{
- struct device_node *parent, *child;
- int num = 0;
+ struct device_node *parent;
+ int num;
of_node_get(pdev->dev.parent->of_node);
parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators");
if (!parent)
return -ENODEV;
- for_each_child_of_node(parent, child)
- num++;
-
+ num = of_get_child_count(parent);
+ of_node_put(parent);
return num;
}
EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators)
+ int num_regulators, int *num_parsed)
{
struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
struct mc13xxx_regulator_init_data *data, *p;
struct device_node *parent, *child;
- int i;
+ int i, parsed = 0;
+
+ *num_parsed = 0;
of_node_get(pdev->dev.parent->of_node);
parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators");
@@ -195,24 +196,32 @@
data = devm_kzalloc(&pdev->dev, sizeof(*data) * priv->num_regulators,
GFP_KERNEL);
- if (!data)
+ if (!data) {
+ of_node_put(parent);
return NULL;
+ }
+
p = data;
for_each_child_of_node(parent, child) {
for (i = 0; i < num_regulators; i++) {
if (!of_node_cmp(child->name,
regulators[i].desc.name)) {
+
p->id = i;
p->init_data = of_get_regulator_init_data(
&pdev->dev, child);
p->node = child;
p++;
+
+ parsed++;
break;
}
}
}
+ of_node_put(parent);
+ *num_parsed = parsed;
return data;
}
EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index 06c8903..007f833 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -39,7 +39,7 @@
extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev);
extern struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators);
+ int num_regulators, int *num_parsed);
#else
static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
{
@@ -48,7 +48,7 @@
static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators)
+ int num_regulators, int *num_parsed)
{
return NULL;
}
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index c9e912f..cde13bb 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -527,6 +527,7 @@
u32 prop;
int idx, ret;
+ node = of_node_get(node);
regulators = of_find_node_by_name(node, "regulators");
if (!regulators) {
dev_info(dev, "regulator node not found\n");
@@ -535,6 +536,7 @@
ret = of_regulator_match(dev, regulators, palmas_matches,
PALMAS_NUM_REGS);
+ of_node_put(regulators);
if (ret < 0) {
dev_err(dev, "Error parsing regulator init data: %d\n", ret);
return;
@@ -566,11 +568,6 @@
pdata->reg_init[idx]->mode_sleep = prop;
ret = of_property_read_u32(palmas_matches[idx].of_node,
- "ti,warm_reset", &prop);
- if (!ret)
- pdata->reg_init[idx]->warm_reset = prop;
-
- ret = of_property_read_u32(palmas_matches[idx].of_node,
"ti,tstep", &prop);
if (!ret)
pdata->reg_init[idx]->tstep = prop;
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 33b65c9..8a83194 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -14,6 +14,7 @@
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -21,6 +22,9 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/regulator/of_regulator.h>
+
+#define S5M8767_OPMODE_NORMAL_MODE 0x1
struct s5m8767_info {
struct device *dev;
@@ -255,10 +259,8 @@
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
}
-static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
+static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg_id = rdev_get_id(rdev);
int reg;
switch (reg_id) {
@@ -296,43 +298,18 @@
return -EINVAL;
}
- *_reg = reg;
-
- return 0;
+ return reg;
}
-static int s5m8767_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg, mask, ret;
- int reg_id = rdev_get_id(rdev);
- unsigned int val;
-
- ret = s5m8767_get_voltage_register(rdev, ®);
- if (ret)
- return ret;
-
- mask = (reg_id < S5M8767_BUCK1) ? 0x3f : 0xff;
-
- ret = sec_reg_read(s5m8767->iodev, reg, &val);
- if (ret)
- return ret;
-
- val &= mask;
-
- return val;
-}
-
-static int s5m8767_convert_voltage_to_sel(
- const struct sec_voltage_desc *desc,
- int min_vol, int max_vol)
+static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
+ int min_vol)
{
int selector = 0;
if (desc == NULL)
return -EINVAL;
- if (max_vol < desc->min || min_vol > desc->max)
+ if (min_vol > desc->max)
return -EINVAL;
if (min_vol < desc->min)
@@ -340,7 +317,7 @@
selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
- if (desc->min + desc->step * selector > max_vol)
+ if (desc->min + desc->step * selector > desc->max)
return -EINVAL;
return selector;
@@ -373,15 +350,13 @@
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg_id = rdev_get_id(rdev);
- int reg, mask, ret = 0, old_index, index = 0;
+ int old_index, index = 0;
u8 *buck234_vol = NULL;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO28:
- mask = 0x3f;
break;
case S5M8767_BUCK1 ... S5M8767_BUCK6:
- mask = 0xff;
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
buck234_vol = &s5m8767->buck2_vol[0];
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
@@ -392,7 +367,6 @@
case S5M8767_BUCK7 ... S5M8767_BUCK8:
return -EINVAL;
case S5M8767_BUCK9:
- mask = 0xff;
break;
default:
return -EINVAL;
@@ -412,11 +386,7 @@
else
return s5m8767_set_low(s5m8767);
} else {
- ret = s5m8767_get_voltage_register(rdev, ®);
- if (ret)
- return ret;
-
- return sec_reg_update(s5m8767->iodev, reg, selector, mask);
+ return regulator_set_voltage_sel_regmap(rdev, selector);
}
}
@@ -441,7 +411,7 @@
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
- .get_voltage_sel = s5m8767_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = s5m8767_set_voltage_sel,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
@@ -508,10 +478,182 @@
s5m8767_regulator_desc(BUCK9),
};
+#ifdef CONFIG_OF
+static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-dvs-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_gpios[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-ds-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_ds[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct sec_platform_data *pdata)
+{
+ struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *pmic_np, *regulators_np, *reg_np;
+ struct sec_regulator_data *rdata;
+ struct sec_opmode_data *rmode;
+ unsigned int i, dvs_voltage_nr = 1, ret;
+
+ pmic_np = iodev->dev->of_node;
+ if (!pmic_np) {
+ dev_err(iodev->dev, "could not find pmic sub-node\n");
+ return -ENODEV;
+ }
+
+ regulators_np = of_find_node_by_name(pmic_np, "regulators");
+ if (!regulators_np) {
+ dev_err(iodev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ /* count the number of regulators to be supported in pmic */
+ pdata->num_regulators = of_get_child_count(regulators_np);
+
+ rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator data\n");
+ return -ENOMEM;
+ }
+
+ rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator mode\n");
+ return -ENOMEM;
+ }
+
+ pdata->regulators = rdata;
+ pdata->opmode = rmode;
+ for_each_child_of_node(regulators_np, reg_np) {
+ for (i = 0; i < ARRAY_SIZE(regulators); i++)
+ if (!of_node_cmp(reg_np->name, regulators[i].name))
+ break;
+
+ if (i == ARRAY_SIZE(regulators)) {
+ dev_warn(iodev->dev,
+ "don't know how to configure regulator %s\n",
+ reg_np->name);
+ continue;
+ }
+
+ rdata->id = i;
+ rdata->initdata = of_get_regulator_init_data(
+ &pdev->dev, reg_np);
+ rdata->reg_node = reg_np;
+ rdata++;
+ rmode->id = i;
+ if (of_property_read_u32(reg_np, "op_mode",
+ &rmode->mode)) {
+ dev_warn(iodev->dev,
+ "no op_mode property property at %s\n",
+ reg_np->full_name);
+
+ rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
+ }
+ rmode++;
+ }
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
+ pdata->buck2_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
+ pdata->buck3_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
+ pdata->buck4_gpiodvs = true;
+
+ if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+ pdata->buck4_gpiodvs) {
+ ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32(pmic_np,
+ "s5m8767,pmic-buck-default-dvs-idx",
+ &pdata->buck_default_idx)) {
+ pdata->buck_default_idx = 0;
+ } else {
+ if (pdata->buck_default_idx >= 8) {
+ pdata->buck_default_idx = 0;
+ dev_info(iodev->dev,
+ "invalid value for default dvs index, use 0\n");
+ }
+ }
+ dvs_voltage_nr = 8;
+ }
+
+ ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck2-dvs-voltage",
+ pdata->buck2_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck2 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck3-dvs-voltage",
+ pdata->buck3_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck3 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck4-dvs-voltage",
+ pdata->buck4_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck4 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct sec_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
static int s5m8767_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct sec_platform_data *pdata = iodev->pdata;
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
@@ -522,6 +664,12 @@
return -ENODEV;
}
+ if (iodev->dev->of_node) {
+ ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
+ if (ret)
+ return ret;
+ }
+
if (pdata->buck2_gpiodvs) {
if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
@@ -577,23 +725,17 @@
s5m8767->opmode = pdata->opmode;
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck2_init,
- pdata->buck2_init +
- buck_voltage_val2.step);
+ pdata->buck2_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck3_init,
- pdata->buck3_init +
- buck_voltage_val2.step);
+ pdata->buck3_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck4_init,
- pdata->buck4_init +
- buck_voltage_val2.step);
+ pdata->buck4_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
@@ -602,27 +744,21 @@
s5m8767->buck2_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck2_voltage[i],
- pdata->buck2_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck2_voltage[i]);
}
if (s5m8767->buck3_gpiodvs) {
s5m8767->buck3_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck3_voltage[i],
- pdata->buck3_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck3_voltage[i]);
}
if (s5m8767->buck4_gpiodvs) {
s5m8767->buck4_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck4_voltage[i],
- pdata->buck4_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck4_voltage[i]);
}
}
@@ -760,11 +896,19 @@
(desc->max - desc->min) / desc->step + 1;
regulators[id].min_uV = desc->min;
regulators[id].uV_step = desc->step;
+ regulators[id].vsel_reg =
+ s5m8767_get_vsel_reg(id, s5m8767);
+ if (id < S5M8767_BUCK1)
+ regulators[id].vsel_mask = 0x3f;
+ else
+ regulators[id].vsel_mask = 0xff;
}
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
+ config.regmap = iodev->regmap;
+ config.of_node = pdata->regulators[i].reg_node;
rdev[i] = regulator_register(®ulators[id], &config);
if (IS_ERR(rdev[i])) {
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index ab21133..6e67be7 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -28,10 +28,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/regulator/tps51632-regulator.h>
#include <linux/slab.h>
@@ -85,49 +88,8 @@
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regmap *regmap;
- bool enable_pwm_dvfs;
};
-static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct tps51632_chip *tps = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
- unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
- int vsel;
-
- if (tps->enable_pwm_dvfs)
- reg = TPS51632_VOLTAGE_BASE_REG;
-
- ret = regmap_read(tps->regmap, reg, &data);
- if (ret < 0) {
- dev_err(tps->dev, "reg read failed, err %d\n", ret);
- return ret;
- }
-
- vsel = data & TPS51632_VOUT_MASK;
- return vsel;
-}
-
-static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct tps51632_chip *tps = rdev_get_drvdata(rdev);
- int ret;
- unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
-
- if (tps->enable_pwm_dvfs)
- reg = TPS51632_VOLTAGE_BASE_REG;
-
- if (selector > TPS51632_MAX_VSEL)
- return -EINVAL;
-
- ret = regmap_write(tps->regmap, reg, selector);
- if (ret < 0)
- dev_err(tps->dev, "reg write failed, err %d\n", ret);
- return ret;
-}
-
static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
@@ -144,8 +106,8 @@
}
static struct regulator_ops tps51632_dcdc_ops = {
- .get_voltage_sel = tps51632_dcdc_get_voltage_sel,
- .set_voltage_sel = tps51632_dcdc_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = tps51632_dcdc_set_ramp_delay,
@@ -162,7 +124,6 @@
goto skip_pwm_config;
control |= TPS51632_DVFS_PWMEN;
- tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs;
vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV);
ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel);
if (ret < 0) {
@@ -205,22 +166,96 @@
return ret;
}
-static bool rd_wr_reg(struct device *dev, unsigned int reg)
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
{
- if ((reg >= 0x8) && (reg <= 0x10))
+ switch (reg) {
+ case TPS51632_OFFSET_REG:
+ case TPS51632_FAULT_REG:
+ case TPS51632_IMON_REG:
+ return true;
+ default:
return false;
- return true;
+ }
+}
+
+static bool is_read_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case 0x08 ... 0x0F:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static bool is_write_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case TPS51632_VOLTAGE_SELECT_REG:
+ case TPS51632_VOLTAGE_BASE_REG:
+ case TPS51632_VMAX_REG:
+ case TPS51632_DVFS_CONTROL_REG:
+ case TPS51632_POWER_STATE_REG:
+ case TPS51632_SLEW_REGS:
+ return true;
+ default:
+ return false;
+ }
}
static const struct regmap_config tps51632_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .writeable_reg = rd_wr_reg,
- .readable_reg = rd_wr_reg,
+ .writeable_reg = is_write_reg,
+ .readable_reg = is_read_reg,
+ .volatile_reg = is_volatile_reg,
.max_register = TPS51632_MAX_REG - 1,
.cache_type = REGCACHE_RBTREE,
};
+#if defined(CONFIG_OF)
+static const struct of_device_id tps51632_of_match[] = {
+ { .compatible = "ti,tps51632",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, tps51632_of_match);
+
+static struct tps51632_regulator_platform_data *
+ of_get_tps51632_platform_data(struct device *dev)
+{
+ struct tps51632_regulator_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "Memory alloc failed for platform data\n");
+ return NULL;
+ }
+
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ if (!pdata->reg_init_data) {
+ dev_err(dev, "Not able to get OF regulator init data\n");
+ return NULL;
+ }
+
+ pdata->enable_pwm_dvfs =
+ of_property_read_bool(np, "ti,enable-pwm-dvfs");
+ pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV");
+
+ pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? :
+ TPS51632_MIN_VOLATGE;
+ pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? :
+ TPS51632_MAX_VOLATGE;
+ return pdata;
+}
+#else
+static struct tps51632_regulator_platform_data *
+ of_get_tps51632_platform_data(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int tps51632_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -230,7 +265,19 @@
int ret;
struct regulator_config config = { };
+ if (client->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_device(of_match_ptr(tps51632_of_match),
+ &client->dev);
+ if (!match) {
+ dev_err(&client->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ }
+
pdata = client->dev.platform_data;
+ if (!pdata && client->dev.of_node)
+ pdata = of_get_tps51632_platform_data(&client->dev);
if (!pdata) {
dev_err(&client->dev, "No Platform data\n");
return -EINVAL;
@@ -269,6 +316,12 @@
tps->desc.type = REGULATOR_VOLTAGE;
tps->desc.owner = THIS_MODULE;
+ if (pdata->enable_pwm_dvfs)
+ tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
+ else
+ tps->desc.vsel_reg = TPS51632_VOLTAGE_SELECT_REG;
+ tps->desc.vsel_mask = TPS51632_VOUT_MASK;
+
tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
@@ -319,6 +372,7 @@
.driver = {
.name = "tps51632",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tps51632_of_match),
},
.probe = tps51632_probe,
.remove = tps51632_remove,
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 0233cfb..54aa2da 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -23,8 +23,10 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
+#include <linux/of.h>
#include <linux/slab.h>
#include <linux/mfd/tps6507x.h>
+#include <linux/regulator/of_regulator.h>
/* DCDC's */
#define TPS6507X_DCDC_1 0
@@ -356,6 +358,80 @@
.list_voltage = regulator_list_voltage_table,
};
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6507x_matches[] = {
+ { .name = "VDCDC1"},
+ { .name = "VDCDC2"},
+ { .name = "VDCDC3"},
+ { .name = "LDO1"},
+ { .name = "LDO2"},
+};
+
+static struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ struct tps6507x_board *tps_board;
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ struct of_regulator_match *matches;
+ static struct regulator_init_data *reg_data;
+ int idx = 0, count, ret;
+
+ tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
+ GFP_KERNEL);
+ if (!tps_board) {
+ dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n");
+ return NULL;
+ }
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return NULL;
+ }
+
+ count = ARRAY_SIZE(tps6507x_matches);
+ matches = tps6507x_matches;
+
+ ret = of_regulator_match(&pdev->dev, regulators, matches, count);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return NULL;
+ }
+
+ *tps6507x_reg_matches = matches;
+
+ reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data)
+ * TPS6507X_NUM_REGULATOR), GFP_KERNEL);
+ if (!reg_data) {
+ dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n");
+ return NULL;
+ }
+
+ tps_board->tps6507x_pmic_init_data = reg_data;
+
+ for (idx = 0; idx < count; idx++) {
+ if (!matches[idx].init_data || !matches[idx].of_node)
+ continue;
+
+ memcpy(®_data[idx], matches[idx].init_data,
+ sizeof(struct regulator_init_data));
+
+ }
+
+ return tps_board;
+}
+#else
+static inline struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ *tps6507x_reg_matches = NULL;
+ return NULL;
+}
+#endif
static int tps6507x_pmic_probe(struct platform_device *pdev)
{
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
@@ -365,8 +441,10 @@
struct regulator_dev *rdev;
struct tps6507x_pmic *tps;
struct tps6507x_board *tps_board;
+ struct of_regulator_match *tps6507x_reg_matches = NULL;
int i;
int error;
+ unsigned int prop;
/**
* tps_board points to pmic related constants
@@ -374,6 +452,9 @@
*/
tps_board = dev_get_platdata(tps6507x_dev->dev);
+ if (!tps_board && tps6507x_dev->dev->of_node)
+ tps_board = tps6507x_parse_dt_reg_data(pdev,
+ &tps6507x_reg_matches);
if (!tps_board)
return -EINVAL;
@@ -415,6 +496,17 @@
config.init_data = init_data;
config.driver_data = tps;
+ if (tps6507x_reg_matches) {
+ error = of_property_read_u32(
+ tps6507x_reg_matches[i].of_node,
+ "ti,defdcdc_default", &prop);
+
+ if (!error)
+ tps->info[i]->defdcdc_default = prop;
+
+ config.of_node = tps6507x_reg_matches[i].of_node;
+ }
+
rdev = regulator_register(&tps->desc[i], &config);
if (IS_ERR(rdev)) {
dev_err(tps6507x_dev->dev,
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 41c3917..c8e7045 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -19,11 +19,13 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/mfd/tps65090.h>
struct tps65090_regulator {
@@ -67,8 +69,8 @@
tps65090_REG_DESC(FET5, "infet5", 0x13, tps65090_reg_contol_ops),
tps65090_REG_DESC(FET6, "infet6", 0x14, tps65090_reg_contol_ops),
tps65090_REG_DESC(FET7, "infet7", 0x15, tps65090_reg_contol_ops),
- tps65090_REG_DESC(LDO1, "vsys_l1", 0, tps65090_ldo_ops),
- tps65090_REG_DESC(LDO2, "vsys_l2", 0, tps65090_ldo_ops),
+ tps65090_REG_DESC(LDO1, "vsys-l1", 0, tps65090_ldo_ops),
+ tps65090_REG_DESC(LDO2, "vsys-l2", 0, tps65090_ldo_ops),
};
static inline bool is_dcdc(int id)
@@ -138,6 +140,92 @@
}
}
+#ifdef CONFIG_OF
+static struct of_regulator_match tps65090_matches[] = {
+ { .name = "dcdc1", },
+ { .name = "dcdc2", },
+ { .name = "dcdc3", },
+ { .name = "fet1", },
+ { .name = "fet2", },
+ { .name = "fet3", },
+ { .name = "fet4", },
+ { .name = "fet5", },
+ { .name = "fet6", },
+ { .name = "fet7", },
+ { .name = "ldo1", },
+ { .name = "ldo2", },
+};
+
+static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps65090_reg_matches)
+{
+ struct tps65090_platform_data *tps65090_pdata;
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ int idx = 0, ret;
+ struct tps65090_regulator_plat_data *reg_pdata;
+
+ tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
+ GFP_KERNEL);
+ if (!tps65090_pdata) {
+ dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX *
+ sizeof(*reg_pdata), GFP_KERNEL);
+ if (!reg_pdata) {
+ dev_err(&pdev->dev, "Memory alloc for reg_pdata failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
+ ARRAY_SIZE(tps65090_matches));
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Error parsing regulator init data: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ *tps65090_reg_matches = tps65090_matches;
+ for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
+ struct regulator_init_data *ri_data;
+ struct tps65090_regulator_plat_data *rpdata;
+
+ rpdata = ®_pdata[idx];
+ ri_data = tps65090_matches[idx].init_data;
+ if (!ri_data || !tps65090_matches[idx].of_node)
+ continue;
+
+ rpdata->reg_init_data = ri_data;
+ rpdata->enable_ext_control = of_property_read_bool(
+ tps65090_matches[idx].of_node,
+ "ti,enable-ext-control");
+ if (rpdata->enable_ext_control)
+ rpdata->gpio = of_get_named_gpio(np,
+ "dcdc-ext-control-gpios", 0);
+
+ tps65090_pdata->reg_pdata[idx] = rpdata;
+ }
+ return tps65090_pdata;
+}
+#else
+static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps65090_reg_matches)
+{
+ *tps65090_reg_matches = NULL;
+ return NULL;
+}
+#endif
+
static int tps65090_regulator_probe(struct platform_device *pdev)
{
struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
@@ -147,15 +235,19 @@
struct tps65090_regulator_plat_data *tps_pdata;
struct tps65090_regulator *pmic;
struct tps65090_platform_data *tps65090_pdata;
+ struct of_regulator_match *tps65090_reg_matches = NULL;
int num;
int ret;
dev_dbg(&pdev->dev, "Probing regulator\n");
tps65090_pdata = dev_get_platdata(pdev->dev.parent);
- if (!tps65090_pdata) {
+ if (!tps65090_pdata && tps65090_mfd->dev->of_node)
+ tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
+ &tps65090_reg_matches);
+ if (IS_ERR_OR_NULL(tps65090_pdata)) {
dev_err(&pdev->dev, "Platform data missing\n");
- return -EINVAL;
+ return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
}
pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
@@ -192,13 +284,17 @@
}
}
- config.dev = &pdev->dev;
+ config.dev = pdev->dev.parent;
config.driver_data = ri;
config.regmap = tps65090_mfd->rmap;
if (tps_pdata)
config.init_data = tps_pdata->reg_init_data;
else
config.init_data = NULL;
+ if (tps65090_reg_matches)
+ config.of_node = tps65090_reg_matches[num].of_node;
+ else
+ config.of_node = NULL;
rdev = regulator_register(ri->desc, &config);
if (IS_ERR(rdev)) {
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index f86da67..e68382d 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -61,10 +61,6 @@
int enable_bit[2];
int enable_reg[2];
-
- /* for DVM regulators */
- int go_reg;
- int go_bit;
};
static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
@@ -72,37 +68,10 @@
return rdev_get_dev(rdev)->parent;
}
-static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
- int ret, val, rid = rdev_get_id(rdev);
- uint8_t mask;
-
- val = selector << (ffs(rdev->desc->vsel_mask) - 1);
- mask = rdev->desc->vsel_mask;
-
- ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
- if (ret)
- return ret;
-
- /* Update go bit for DVM regulators */
- switch (rid) {
- case TPS6586X_ID_LDO_2:
- case TPS6586X_ID_LDO_4:
- case TPS6586X_ID_SM_0:
- case TPS6586X_ID_SM_1:
- ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
- break;
- }
- return ret;
-}
-
static struct regulator_ops tps6586x_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = tps6586x_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@@ -142,7 +111,7 @@
};
#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
.desc = { \
.supply_name = _pin_name, \
.name = "REG-" #_id, \
@@ -156,29 +125,26 @@
.enable_mask = 1 << (ebit0), \
.vsel_reg = TPS6586X_##vreg, \
.vsel_mask = ((1 << (nbits)) - 1) << (shift), \
+ .apply_reg = (goreg), \
+ .apply_bit = (gobit), \
}, \
.enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
.enable_bit[1] = (ebit1),
-#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
- .go_reg = TPS6586X_##goreg, \
- .go_bit = (gobit),
-
#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
{ \
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
+ ereg0, ebit0, ereg1, ebit1, 0, 0) \
}
#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
{ \
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
- TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
}
#define TPS6586X_SYS_REGULATOR() \
@@ -207,13 +173,13 @@
TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
- ENB, 3, VCC2, 6),
+ ENB, 3, TPS6586X_VCC2, BIT(6)),
TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
- END, 3, VCC1, 6),
+ END, 3, TPS6586X_VCC1, BIT(6)),
TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
- ENB, 1, VCC1, 2),
+ ENB, 1, TPS6586X_VCC1, BIT(2)),
TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
- ENB, 0, VCC1, 0),
+ ENB, 0, TPS6586X_VCC1, BIT(0)),
};
/*
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index b0e4c0b..6ba6931 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -964,8 +964,7 @@
{
struct tps65910_board *pmic_plat_data;
struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
- struct device_node *np = pdev->dev.parent->of_node;
- struct device_node *regulators;
+ struct device_node *np, *regulators;
struct of_regulator_match *matches;
unsigned int prop;
int idx = 0, ret, count;
@@ -978,6 +977,7 @@
return NULL;
}
+ np = of_node_get(pdev->dev.parent->of_node);
regulators = of_find_node_by_name(np, "regulators");
if (!regulators) {
dev_err(&pdev->dev, "regulator node not found\n");
@@ -994,11 +994,13 @@
matches = tps65911_matches;
break;
default:
+ of_node_put(regulators);
dev_err(&pdev->dev, "Invalid tps chip version\n");
return NULL;
}
ret = of_regulator_match(&pdev->dev, regulators, matches, count);
+ of_node_put(regulators);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
ret);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 923a9da..5e44eaa 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -20,14 +20,24 @@
config RTC_HCTOSYS
bool "Set system time from RTC on startup and resume"
default y
+ depends on !ALWAYS_USE_PERSISTENT_CLOCK
help
If you say yes here, the system time (wall clock) will be set using
the value read from a specified RTC device. This is useful to avoid
unnecessary fsck runs at boot time, and to network better.
+config RTC_SYSTOHC
+ bool "Set the RTC time based on NTP synchronization"
+ default y
+ depends on !ALWAYS_USE_PERSISTENT_CLOCK
+ help
+ If you say yes here, the system time (wall clock) will be stored
+ in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
+ minutes if userspace reports synchronized NTP status.
+
config RTC_HCTOSYS_DEVICE
string "RTC used to set the system time"
- depends on RTC_HCTOSYS = y
+ depends on RTC_HCTOSYS = y || RTC_SYSTOHC = y
default "rtc0"
help
The RTC device that will be used to (re)initialize the system
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4418ef3..ec2988b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_RTC_LIB) += rtc-lib.o
obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
+obj-$(CONFIG_RTC_SYSTOHC) += systohc.o
obj-$(CONFIG_RTC_CLASS) += rtc-core.o
rtc-core-y := class.o interface.o
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 5143629..26388f1 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -50,6 +50,10 @@
struct rtc_device *rtc = to_rtc_device(dev);
struct rtc_time tm;
struct timespec delta, delta_delta;
+
+ if (has_persistent_clock())
+ return 0;
+
if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
return 0;
@@ -88,6 +92,9 @@
struct timespec new_system, new_rtc;
struct timespec sleep_time;
+ if (has_persistent_clock())
+ return 0;
+
rtc_hctosys_ret = -ENODEV;
if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
return 0;
diff --git a/drivers/rtc/systohc.c b/drivers/rtc/systohc.c
new file mode 100644
index 0000000..bf3e242
--- /dev/null
+++ b/drivers/rtc/systohc.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+#include <linux/rtc.h>
+#include <linux/time.h>
+
+/**
+ * rtc_set_ntp_time - Save NTP synchronized time to the RTC
+ * @now: Current time of day
+ *
+ * Replacement for the NTP platform function update_persistent_clock
+ * that stores time for later retrieval by rtc_hctosys.
+ *
+ * Returns 0 on successful RTC update, -ENODEV if a RTC update is not
+ * possible at all, and various other -errno for specific temporary failure
+ * cases.
+ *
+ * If temporary failure is indicated the caller should try again 'soon'
+ */
+int rtc_set_ntp_time(struct timespec now)
+{
+ struct rtc_device *rtc;
+ struct rtc_time tm;
+ int err = -ENODEV;
+
+ if (now.tv_nsec < (NSEC_PER_SEC >> 1))
+ rtc_time_to_tm(now.tv_sec, &tm);
+ else
+ rtc_time_to_tm(now.tv_sec + 1, &tm);
+
+ rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+ if (rtc) {
+ /* rtc_hctosys exclusively uses UTC, so we call set_time here,
+ * not set_mmss. */
+ if (rtc->ops && (rtc->ops->set_time || rtc->ops->set_mmss))
+ err = rtc_set_time(rtc, &tm);
+ rtc_class_close(rtc);
+ }
+
+ return err;
+}
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2e188e1..e79884e9 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -297,9 +297,20 @@
help
This selects a driver for the PPC4xx SPI Controller.
+config SPI_PXA2XX_PXADMA
+ bool "PXA2xx SSP legacy PXA DMA API support"
+ depends on SPI_PXA2XX && ARCH_PXA
+ help
+ Enable PXA private legacy DMA API support. Note that this is
+ deprecated in favor of generic DMA engine API.
+
+config SPI_PXA2XX_DMA
+ def_bool y
+ depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+ depends on ARCH_PXA || PCI || ACPI
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
@@ -307,7 +318,7 @@
additional documentation can be found a Documentation/spi/pxa2xx.
config SPI_PXA2XX_PCI
- def_bool SPI_PXA2XX && X86_32 && PCI
+ def_tristate SPI_PXA2XX && PCI
config SPI_RSPI
tristate "Renesas RSPI controller"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 64e970b..e53c309 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -47,7 +47,10 @@
obj-$(CONFIG_SPI_ORION) += spi-orion.o
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
-obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
+spi-pxa2xx-platform-objs := spi-pxa2xx.o
+spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o
+spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 5e7314a..a537f8d 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -134,7 +134,7 @@
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
hw->count = 0;
- hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8;
+ hw->bytes_per_word = t->bits_per_word / 8;
hw->len = t->len / hw->bytes_per_word;
if (hw->irq >= 0) {
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 9a5d779..e504b76 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -24,17 +24,24 @@
#include <linux/spi/spi_bitbang.h>
#include <linux/bitops.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79_spi_platform.h>
#define DRV_NAME "ath79-spi"
+#define ATH79_SPI_RRW_DELAY_FACTOR 12000
+#define MHZ (1000 * 1000)
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
u32 reg_ctrl;
void __iomem *base;
+ struct clk *clk;
+ unsigned rrw_delay;
};
static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
@@ -52,6 +59,12 @@
return spi_master_get_devdata(spi->master);
}
+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
+{
+ if (nsecs > sp->rrw_delay)
+ ndelay(nsecs - sp->rrw_delay);
+}
+
static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
@@ -83,15 +96,8 @@
}
-static int ath79_spi_setup_cs(struct spi_device *spi)
+static void ath79_spi_enable(struct ath79_spi *sp)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- struct ath79_spi_controller_data *cdata;
-
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
- return -EINVAL;
-
/* enable GPIO mode */
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
@@ -101,46 +107,50 @@
/* TODO: setup speed? */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
-
- if (spi->chip_select) {
- int status = 0;
-
- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
- if (status)
- return status;
-
- status = gpio_direction_output(cdata->gpio,
- spi->mode & SPI_CS_HIGH);
- if (status) {
- gpio_free(cdata->gpio);
- return status;
- }
- } else {
- if (spi->mode & SPI_CS_HIGH)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
- else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
- return 0;
}
-static void ath79_spi_cleanup_cs(struct spi_device *spi)
+static void ath79_spi_disable(struct ath79_spi *sp)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
- }
-
/* restore CTRL register */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
/* disable GPIO mode */
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
}
+static int ath79_spi_setup_cs(struct spi_device *spi)
+{
+ struct ath79_spi_controller_data *cdata;
+ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+ return -EINVAL;
+
+ status = 0;
+ if (spi->chip_select) {
+ unsigned long flags;
+
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+ flags |= GPIOF_INIT_HIGH;
+ else
+ flags |= GPIOF_INIT_LOW;
+
+ status = gpio_request_one(cdata->gpio, flags,
+ dev_name(&spi->dev));
+ }
+
+ return status;
+}
+
+static void ath79_spi_cleanup_cs(struct spi_device *spi)
+{
+ if (spi->chip_select) {
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
+ gpio_free(cdata->gpio);
+ }
+}
+
static int ath79_spi_setup(struct spi_device *spi)
{
int status = 0;
@@ -184,7 +194,11 @@
/* setup MSB (to slave) on trailing edge */
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+ ath79_spi_delay(sp, nsecs);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(sp, nsecs);
+ if (bits == 1)
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
word <<= 1;
}
@@ -198,6 +212,7 @@
struct ath79_spi *sp;
struct ath79_spi_platform_data *pdata;
struct resource *r;
+ unsigned long rate;
int ret;
master = spi_alloc_master(&pdev->dev, sizeof(*sp));
@@ -236,12 +251,39 @@
goto err_put_master;
}
+ sp->clk = clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sp->clk)) {
+ ret = PTR_ERR(sp->clk);
+ goto err_unmap;
+ }
+
+ ret = clk_enable(sp->clk);
+ if (ret)
+ goto err_clk_put;
+
+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+ sp->rrw_delay);
+
+ ath79_spi_enable(sp);
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
- goto err_unmap;
+ goto err_disable;
return 0;
+err_disable:
+ ath79_spi_disable(sp);
+err_clk_disable:
+ clk_disable(sp->clk);
+err_clk_put:
+ clk_put(sp->clk);
err_unmap:
iounmap(sp->base);
err_put_master:
@@ -256,6 +298,9 @@
struct ath79_spi *sp = platform_get_drvdata(pdev);
spi_bitbang_stop(&sp->bitbang);
+ ath79_spi_disable(sp);
+ clk_disable(sp->clk);
+ clk_put(sp->clk);
iounmap(sp->base);
platform_set_drvdata(pdev, NULL);
spi_master_put(sp->bitbang.master);
@@ -263,9 +308,15 @@
return 0;
}
+static void ath79_spi_shutdown(struct platform_device *pdev)
+{
+ ath79_spi_remove(pdev);
+}
+
static struct platform_driver ath79_spi_driver = {
.probe = ath79_spi_probe,
.remove = ath79_spi_remove,
+ .shutdown = ath79_spi_shutdown,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index ab34497..656d137 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1088,7 +1088,7 @@
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
.probe = atmel_spi_probe,
- .remove = __exit_p(atmel_spi_remove),
+ .remove = atmel_spi_remove,
};
module_platform_driver(atmel_spi_driver);
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 4de66d1..44dd34b 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -717,7 +717,7 @@
}
}
-static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
+static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
{
u32 stat, cfg;
@@ -766,7 +766,7 @@
}
-static int __init au1550_spi_probe(struct platform_device *pdev)
+static int au1550_spi_probe(struct platform_device *pdev)
{
struct au1550_spi *hw;
struct spi_master *master;
@@ -968,7 +968,7 @@
return err;
}
-static int __exit au1550_spi_remove(struct platform_device *pdev)
+static int au1550_spi_remove(struct platform_device *pdev)
{
struct au1550_spi *hw = platform_get_drvdata(pdev);
@@ -997,7 +997,7 @@
MODULE_ALIAS("platform:au1550-spi");
static struct platform_driver au1550_spi_drv = {
- .remove = __exit_p(au1550_spi_remove),
+ .remove = au1550_spi_remove,
.driver = {
.name = "au1550-spi",
.owner = THIS_MODULE,
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index f44ab55..9578af7 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -37,6 +37,8 @@
#define PFX KBUILD_MODNAME
+#define BCM63XX_SPI_MAX_PREPEND 15
+
struct bcm63xx_spi {
struct completion done;
@@ -49,16 +51,10 @@
unsigned int msg_type_shift;
unsigned int msg_ctl_width;
- /* Data buffers */
- const unsigned char *tx_ptr;
- unsigned char *rx_ptr;
-
/* data iomem */
u8 __iomem *tx_io;
const u8 __iomem *rx_io;
- int remaining_bytes;
-
struct clk *clk;
struct platform_device *pdev;
};
@@ -175,24 +171,17 @@
return 0;
}
-/* Fill the TX FIFO with as many bytes as possible */
-static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-{
- u8 size;
-
- /* Fill the Tx FIFO with as many bytes as possible */
- size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
- bs->fifo_size;
- memcpy_toio(bs->tx_io, bs->tx_ptr, size);
- bs->remaining_bytes -= size;
-}
-
-static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
- struct spi_transfer *t)
+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
+ unsigned int num_transfers)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u16 msg_ctl;
u16 cmd;
+ u8 rx_tail;
+ unsigned int i, timeout = 0, prepend_len = 0, len = 0;
+ struct spi_transfer *t = first;
+ bool do_rx = false;
+ bool do_tx = false;
/* Disable the CMD_DONE interrupt */
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
@@ -200,25 +189,45 @@
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
- /* Transmitter is inhibited */
- bs->tx_ptr = t->tx_buf;
- bs->rx_ptr = t->rx_buf;
+ if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
+ prepend_len = t->len;
- if (t->tx_buf) {
- bs->remaining_bytes = t->len;
- bcm63xx_spi_fill_tx_fifo(bs);
+ /* prepare the buffer */
+ for (i = 0; i < num_transfers; i++) {
+ if (t->tx_buf) {
+ do_tx = true;
+ memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);
+
+ /* don't prepend more than one tx */
+ if (t != first)
+ prepend_len = 0;
+ }
+
+ if (t->rx_buf) {
+ do_rx = true;
+ /* prepend is half-duplex write only */
+ if (t == first)
+ prepend_len = 0;
+ }
+
+ len += t->len;
+
+ t = list_entry(t->transfer_list.next, struct spi_transfer,
+ transfer_list);
}
+ len -= prepend_len;
+
init_completion(&bs->done);
/* Fill in the Message control register */
- msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
+ msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
- if (t->rx_buf && t->tx_buf)
+ if (do_rx && do_tx && prepend_len == 0)
msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
- else if (t->rx_buf)
+ else if (do_rx)
msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
- else if (t->tx_buf)
+ else if (do_tx)
msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
switch (bs->msg_ctl_width) {
@@ -232,14 +241,41 @@
/* Issue the transfer */
cmd = SPI_CMD_START_IMMEDIATE;
- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
bcm_spi_writew(bs, cmd, SPI_CMD);
/* Enable the CMD_DONE interrupt */
bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
- return t->len - bs->remaining_bytes;
+ timeout = wait_for_completion_timeout(&bs->done, HZ);
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ /* read out all data */
+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+ if (do_rx && rx_tail != len)
+ return -EIO;
+
+ if (!rx_tail)
+ return 0;
+
+ len = 0;
+ t = first;
+ /* Read out all the data */
+ for (i = 0; i < num_transfers; i++) {
+ if (t->rx_buf)
+ memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
+
+ if (t != first || prepend_len == 0)
+ len += t->len;
+
+ t = list_entry(t->transfer_list.next, struct spi_transfer,
+ transfer_list);
+ }
+
+ return 0;
}
static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
@@ -264,41 +300,76 @@
struct spi_message *m)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- struct spi_transfer *t;
+ struct spi_transfer *t, *first = NULL;
struct spi_device *spi = m->spi;
int status = 0;
- unsigned int timeout = 0;
+ unsigned int n_transfers = 0, total_len = 0;
+ bool can_use_prepend = false;
+ /*
+ * This SPI controller does not support keeping CS active after a
+ * transfer.
+ * Work around this by merging as many transfers we can into one big
+ * full-duplex transfers.
+ */
list_for_each_entry(t, &m->transfers, transfer_list) {
- unsigned int len = t->len;
- u8 rx_tail;
-
status = bcm63xx_spi_check_transfer(spi, t);
if (status < 0)
goto exit;
- /* configure adapter for a new transfer */
- bcm63xx_spi_setup_transfer(spi, t);
+ if (!first)
+ first = t;
- while (len) {
- /* send the data */
- len -= bcm63xx_txrx_bufs(spi, t);
+ n_transfers++;
+ total_len += t->len;
- timeout = wait_for_completion_timeout(&bs->done, HZ);
- if (!timeout) {
- status = -ETIMEDOUT;
- goto exit;
- }
+ if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
+ first->len <= BCM63XX_SPI_MAX_PREPEND)
+ can_use_prepend = true;
+ else if (can_use_prepend && t->tx_buf)
+ can_use_prepend = false;
- /* read out all data */
- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
- /* Read out all the data */
- if (rx_tail)
- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+ /* we can only transfer one fifo worth of data */
+ if ((can_use_prepend &&
+ total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
+ (!can_use_prepend && total_len > bs->fifo_size)) {
+ dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
+ total_len, bs->fifo_size);
+ status = -EINVAL;
+ goto exit;
}
- m->actual_length += t->len;
+ /* all combined transfers have to have the same speed */
+ if (t->speed_hz != first->speed_hz) {
+ dev_err(&spi->dev, "unable to change speed between transfers\n");
+ status = -EINVAL;
+ goto exit;
+ }
+
+ /* CS will be deasserted directly after transfer */
+ if (t->delay_usecs) {
+ dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
+ status = -EINVAL;
+ goto exit;
+ }
+
+ if (t->cs_change ||
+ list_is_last(&t->transfer_list, &m->transfers)) {
+ /* configure adapter for a new transfer */
+ bcm63xx_spi_setup_transfer(spi, first);
+
+ /* send the data */
+ status = bcm63xx_txrx_bufs(spi, first, n_transfers);
+ if (status)
+ goto exit;
+
+ m->actual_length += total_len;
+
+ first = NULL;
+ n_transfers = 0;
+ total_len = 0;
+ can_use_prepend = false;
+ }
}
exit:
m->status = status;
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index ac7ffca..39b0d17 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -416,8 +416,7 @@
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? :
- message->spi->bits_per_word ? : 8;
+ bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0)
drv_data->ops = &bfin_sport_transfer_ops_u16;
else
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 0429d83..317f564 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -642,8 +642,7 @@
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? :
- message->spi->bits_per_word ? : 8;
+ bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = (transfer->len) >> 1;
@@ -1274,7 +1273,7 @@
return 0;
}
-static int __init bfin_spi_probe(struct platform_device *pdev)
+static int bfin_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bfin5xx_spi_master *platform_info;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 8b3d8ef..a63d7da 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -69,7 +69,7 @@
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u8 *tx = t->tx_buf;
u8 *rx = t->rx_buf;
@@ -95,7 +95,7 @@
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u16 *tx = t->tx_buf;
u16 *rx = t->rx_buf;
@@ -121,7 +121,7 @@
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u32 *tx = t->tx_buf;
u32 *rx = t->rx_buf;
@@ -427,40 +427,41 @@
*/
int spi_bitbang_start(struct spi_bitbang *bitbang)
{
- int status;
+ struct spi_master *master = bitbang->master;
+ int status;
- if (!bitbang->master || !bitbang->chipselect)
+ if (!master || !bitbang->chipselect)
return -EINVAL;
INIT_WORK(&bitbang->work, bitbang_work);
spin_lock_init(&bitbang->lock);
INIT_LIST_HEAD(&bitbang->queue);
- if (!bitbang->master->mode_bits)
- bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+ if (!master->mode_bits)
+ master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
- if (!bitbang->master->transfer)
- bitbang->master->transfer = spi_bitbang_transfer;
+ if (!master->transfer)
+ master->transfer = spi_bitbang_transfer;
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
- if (!bitbang->master->setup) {
+ if (!master->setup) {
if (!bitbang->setup_transfer)
bitbang->setup_transfer =
spi_bitbang_setup_transfer;
- bitbang->master->setup = spi_bitbang_setup;
- bitbang->master->cleanup = spi_bitbang_cleanup;
+ master->setup = spi_bitbang_setup;
+ master->cleanup = spi_bitbang_cleanup;
}
- } else if (!bitbang->master->setup)
+ } else if (!master->setup)
return -EINVAL;
- if (bitbang->master->transfer == spi_bitbang_transfer &&
+ if (master->transfer == spi_bitbang_transfer &&
!bitbang->setup_transfer)
return -EINVAL;
/* this task is the only thing to touch the SPI bits */
bitbang->busy = 0;
bitbang->workqueue = create_singlethread_workqueue(
- dev_name(bitbang->master->dev.parent));
+ dev_name(master->dev.parent));
if (bitbang->workqueue == NULL) {
status = -EBUSY;
goto err1;
@@ -469,7 +470,7 @@
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
*/
- status = spi_register_master(bitbang->master);
+ status = spi_register_master(master);
if (status < 0)
goto err2;
diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index 1366c46..a11cbf0 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -68,7 +68,7 @@
struct spi_transfer *xfer)
{
u32 speed = xfer->speed_hz ? : spi->max_speed_hz;
- u8 bpw = xfer->bits_per_word ? : spi->bits_per_word;
+ u8 bpw = xfer->bits_per_word;
struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
if (bpw != 8) {
diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index 58466b81..7b5cc9e 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -329,8 +329,7 @@
mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high);
mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE);
- if ((t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word) == 8)
+ if (t->bits_per_word == 8)
mcfqspi_transfer_msg8(mcfqspi, t->len, t->tx_buf,
t->rx_buf);
else
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 13661e1..8234d22 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -28,6 +28,8 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/edma.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
@@ -135,7 +137,7 @@
int dma_rx_chnum;
int dma_tx_chnum;
- struct davinci_spi_platform_data *pdata;
+ struct davinci_spi_platform_data pdata;
void (*get_rx)(u32 rx_data, struct davinci_spi *);
u32 (*get_tx)(struct davinci_spi *);
@@ -213,7 +215,7 @@
bool gpio_chipsel = false;
dspi = spi_master_get_devdata(spi->master);
- pdata = dspi->pdata;
+ pdata = &dspi->pdata;
if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
@@ -392,7 +394,7 @@
struct davinci_spi_platform_data *pdata;
dspi = spi_master_get_devdata(spi->master);
- pdata = dspi->pdata;
+ pdata = &dspi->pdata;
/* if bits per word length is zero then set it default 8 */
if (!spi->bits_per_word)
@@ -534,7 +536,7 @@
struct scatterlist sg_rx, sg_tx;
dspi = spi_master_get_devdata(spi->master);
- pdata = dspi->pdata;
+ pdata = &dspi->pdata;
spicfg = (struct davinci_spi_config *)spi->controller_data;
if (!spicfg)
spicfg = &davinci_spi_default_cfg;
@@ -700,6 +702,19 @@
}
/**
+ * dummy_thread_fn - dummy thread function
+ * @irq: IRQ number for this SPI Master
+ * @context_data: structure for SPI Master controller davinci_spi
+ *
+ * This is to satisfy the request_threaded_irq() API so that the irq
+ * handler is called in interrupt context.
+ */
+static irqreturn_t dummy_thread_fn(s32 irq, void *data)
+{
+ return IRQ_HANDLED;
+}
+
+/**
* davinci_spi_irq - Interrupt handler for SPI Master Controller
* @irq: IRQ number for this SPI Master
* @context_data: structure for SPI Master controller davinci_spi
@@ -758,6 +773,70 @@
return r;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id davinci_spi_of_match[] = {
+ {
+ .compatible = "ti,dm644x-spi",
+ },
+ {
+ .compatible = "ti,da8xx-spi",
+ .data = (void *)SPI_VERSION_2,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, davini_spi_of_match);
+
+/**
+ * spi_davinci_get_pdata - Get platform data from DTS binding
+ * @pdev: ptr to platform data
+ * @dspi: ptr to driver data
+ *
+ * Parses and populates pdata in dspi from device tree bindings.
+ *
+ * NOTE: Not all platform data params are supported currently.
+ */
+static int spi_davinci_get_pdata(struct platform_device *pdev,
+ struct davinci_spi *dspi)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct davinci_spi_platform_data *pdata;
+ unsigned int num_cs, intr_line = 0;
+ const struct of_device_id *match;
+
+ pdata = &dspi->pdata;
+
+ pdata->version = SPI_VERSION_1;
+ match = of_match_device(of_match_ptr(davinci_spi_of_match),
+ &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ /* match data has the SPI version number for SPI_VERSION_2 */
+ if (match->data == (void *)SPI_VERSION_2)
+ pdata->version = SPI_VERSION_2;
+
+ /*
+ * default num_cs is 1 and all chipsel are internal to the chip
+ * indicated by chip_sel being NULL. GPIO based CS is not
+ * supported yet in DT bindings.
+ */
+ num_cs = 1;
+ of_property_read_u32(node, "num-cs", &num_cs);
+ pdata->num_chipselect = num_cs;
+ of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line);
+ pdata->intr_line = intr_line;
+ return 0;
+}
+#else
+#define davinci_spi_of_match NULL
+static struct davinci_spi_platform_data
+ *spi_davinci_get_pdata(struct platform_device *pdev,
+ struct davinci_spi *dspi)
+{
+ return -ENODEV;
+}
+#endif
+
/**
* davinci_spi_probe - probe function for SPI Master Controller
* @pdev: platform_device structure which contains plateform specific data
@@ -780,12 +859,6 @@
int i = 0, ret = 0;
u32 spipc0;
- pdata = pdev->dev.platform_data;
- if (pdata == NULL) {
- ret = -ENODEV;
- goto err;
- }
-
master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
if (master == NULL) {
ret = -ENOMEM;
@@ -800,6 +873,19 @@
goto free_master;
}
+ if (pdev->dev.platform_data) {
+ pdata = pdev->dev.platform_data;
+ dspi->pdata = *pdata;
+ } else {
+ /* update dspi pdata with that from the DT */
+ ret = spi_davinci_get_pdata(pdev, dspi);
+ if (ret < 0)
+ goto free_master;
+ }
+
+ /* pdata in dspi is now updated and point pdata to that */
+ pdata = &dspi->pdata;
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
ret = -ENOENT;
@@ -807,7 +893,6 @@
}
dspi->pbase = r->start;
- dspi->pdata = pdata;
mem = request_mem_region(r->start, resource_size(r), pdev->name);
if (mem == NULL) {
@@ -827,8 +912,8 @@
goto unmap_io;
}
- ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev),
- dspi);
+ ret = request_threaded_irq(dspi->irq, davinci_spi_irq, dummy_thread_fn,
+ 0, dev_name(&pdev->dev), dspi);
if (ret)
goto unmap_io;
@@ -843,8 +928,9 @@
ret = -ENODEV;
goto put_master;
}
- clk_enable(dspi->clk);
+ clk_prepare_enable(dspi->clk);
+ master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->setup = davinci_spi_setup;
@@ -927,7 +1013,7 @@
dma_release_channel(dspi->dma_rx);
dma_release_channel(dspi->dma_tx);
free_clk:
- clk_disable(dspi->clk);
+ clk_disable_unprepare(dspi->clk);
clk_put(dspi->clk);
put_master:
spi_master_put(master);
@@ -963,7 +1049,7 @@
spi_bitbang_stop(&dspi->bitbang);
- clk_disable(dspi->clk);
+ clk_disable_unprepare(dspi->clk);
clk_put(dspi->clk);
spi_master_put(master);
free_irq(dspi->irq, dspi);
@@ -978,6 +1064,7 @@
.driver = {
.name = "spi_davinci",
.owner = THIS_MODULE,
+ .of_match_table = davinci_spi_of_match,
},
.probe = davinci_spi_probe,
.remove = davinci_spi_remove,
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index acb1e19..aecbff1 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -446,7 +446,7 @@
struct spi_message *msg = espi->current_msg;
struct spi_transfer *t = msg->state;
- return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word;
+ return t->bits_per_word;
}
static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
index 6a6f62e..c7a74f0 100644
--- a/drivers/spi/spi-falcon.c
+++ b/drivers/spi/spi-falcon.c
@@ -398,7 +398,7 @@
}
m->status = ret;
- m->complete(m->context);
+ spi_finalize_current_message(master);
return 0;
}
@@ -423,6 +423,7 @@
master->mode_bits = SPI_MODE_3;
master->num_chipselect = 1;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
master->bus_num = -1;
master->setup = falcon_sflash_setup;
master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 1a7f6359..086a9ee 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -947,12 +947,12 @@
struct device_node *np = dev->of_node;
struct fsl_spi_platform_data *pdata = dev->platform_data;
struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
- unsigned int ngpios;
+ int ngpios;
int i = 0;
int ret;
ngpios = of_gpio_count(np);
- if (!ngpios) {
+ if (ngpios <= 0) {
/*
* SPI w/o chip-select line. One SPI device is still permitted
* though.
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index c7cf0b7..9ddef55 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -365,9 +365,26 @@
if (!pdata)
return -ENOMEM;
- pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
- pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
- pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+ ret = of_get_named_gpio(np, "gpio-sck", 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpio-sck property not found\n");
+ goto error_free;
+ }
+ pdata->sck = ret;
+
+ ret = of_get_named_gpio(np, "gpio-miso", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
+ pdata->miso = SPI_GPIO_NO_MISO;
+ } else
+ pdata->miso = ret;
+
+ ret = of_get_named_gpio(np, "gpio-mosi", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
+ pdata->mosi = SPI_GPIO_NO_MOSI;
+ } else
+ pdata->mosi = ret;
ret = of_property_read_u32(np, "num-chipselects", &tmp);
if (ret < 0) {
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 9049132..0befeeb 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -949,3 +949,4 @@
MODULE_DESCRIPTION("SPI Master Controller driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index cb3a310..89480b2 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -438,6 +438,7 @@
master->num_chipselect = pdata->max_chipselect;
}
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
master->setup = mpc512x_psc_spi_setup;
master->transfer = mpc512x_psc_spi_transfer;
master->cleanup = mpc512x_psc_spi_cleanup;
@@ -522,17 +523,11 @@
regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
/* get PSC id (0..11, used by port_config) */
- if (op->dev.platform_data == NULL) {
- const u32 *psc_nump;
-
- psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL);
- if (!psc_nump || *psc_nump > 11) {
- dev_err(&op->dev, "mpc512x_psc_spi: Device node %s "
- "has invalid cell-index property\n",
- op->dev.of_node->full_name);
- return -EINVAL;
- }
- id = *psc_nump;
+ id = of_alias_get_id(op->dev.of_node, "spi");
+ if (id < 0) {
+ dev_err(&op->dev, "no alias id for %s\n",
+ op->dev.of_node->full_name);
+ return id;
}
return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index a3ede24..e3d8b31 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -241,6 +241,7 @@
INIT_COMPLETION(spi->c);
ctrl0 = readl(ssp->base + HW_SSP_CTRL0);
+ ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
if (*first)
@@ -256,8 +257,10 @@
if ((sg_count + 1 == sgs) && *last)
ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC;
- if (ssp->devid == IMX23_SSP)
+ if (ssp->devid == IMX23_SSP) {
+ ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
ctrl0 |= min;
+ }
dma_xfer[sg_count].pio[0] = ctrl0;
dma_xfer[sg_count].pio[3] = min;
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index 432e66e..cb2e284 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -54,7 +54,7 @@
unsigned int txc, rxc;
const u8 *txp;
u8 *rxp;
- unsigned int gpio_cs_count;
+ int gpio_cs_count;
int *gpio_cs;
};
@@ -74,7 +74,7 @@
{
struct tiny_spi *hw = tiny_spi_to_hw(spi);
- if (hw->gpio_cs_count) {
+ if (hw->gpio_cs_count > 0) {
gpio_set_value(hw->gpio_cs[spi->chip_select],
(spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
}
@@ -254,7 +254,7 @@
if (!np)
return 0;
hw->gpio_cs_count = of_gpio_count(np);
- if (hw->gpio_cs_count) {
+ if (hw->gpio_cs_count > 0) {
hw->gpio_cs = devm_kzalloc(&pdev->dev,
hw->gpio_cs_count * sizeof(unsigned int),
GFP_KERNEL);
@@ -352,7 +352,7 @@
goto exit_gpio;
gpio_direction_output(hw->gpio_cs[i], 1);
}
- hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count);
+ hw->bitbang.master->num_chipselect = max(1, hw->gpio_cs_count);
/* register our spi controller */
err = spi_bitbang_start(&hw->bitbang);
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index 3aef7fa..78d29a1 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -481,7 +481,7 @@
return 0;
}
-static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k)
+static int omap1_spi100k_reset(struct omap1_spi100k *spi100k)
{
return 0;
}
@@ -560,7 +560,7 @@
return status;
}
-static int __exit omap1_spi100k_remove(struct platform_device *pdev)
+static int omap1_spi100k_remove(struct platform_device *pdev)
{
struct spi_master *master;
struct omap1_spi100k *spi100k;
@@ -604,7 +604,7 @@
.name = "omap1_spi100k",
.owner = THIS_MODULE,
},
- .remove = __exit_p(omap1_spi100k_remove),
+ .remove = omap1_spi100k_remove,
};
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 0a94d9d..102b233 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -476,7 +476,7 @@
spi_master_put(uwire->bitbang.master);
}
-static int __init uwire_probe(struct platform_device *pdev)
+static int uwire_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct uwire_spi *uwire;
@@ -536,7 +536,7 @@
return status;
}
-static int __exit uwire_remove(struct platform_device *pdev)
+static int uwire_remove(struct platform_device *pdev)
{
struct uwire_spi *uwire = dev_get_drvdata(&pdev->dev);
int status;
@@ -557,7 +557,7 @@
.name = "omap_uwire",
.owner = THIS_MODULE,
},
- .remove = __exit_p(uwire_remove),
+ .remove = uwire_remove,
// suspend ... unuse ck
// resume ... use ck
};
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index b610f52..69945b0 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -298,10 +298,10 @@
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
- complete(&mcspi_dma->dma_rx_completion);
-
/* We must disable the DMA RX request */
omap2_mcspi_set_dma_req(spi, 1, 0);
+
+ complete(&mcspi_dma->dma_rx_completion);
}
static void omap2_mcspi_tx_callback(void *data)
@@ -310,10 +310,10 @@
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
- complete(&mcspi_dma->dma_tx_completion);
-
/* We must disable the DMA TX request */
omap2_mcspi_set_dma_req(spi, 0, 0);
+
+ complete(&mcspi_dma->dma_tx_completion);
}
static void omap2_mcspi_tx_dma(struct spi_device *spi,
@@ -927,6 +927,7 @@
struct spi_device *spi;
struct spi_transfer *t = NULL;
+ struct spi_master *master;
int cs_active = 0;
struct omap2_mcspi_cs *cs;
struct omap2_mcspi_device_config *cd;
@@ -935,6 +936,7 @@
u32 chconf;
spi = m->spi;
+ master = spi->master;
cs = spi->controller_state;
cd = spi->controller_data;
@@ -952,6 +954,14 @@
if (!t->speed_hz && !t->bits_per_word)
par_override = 0;
}
+ if (cd && cd->cs_per_word) {
+ chconf = mcspi->ctx.modulctrl;
+ chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+ mcspi->ctx.modulctrl =
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+ }
+
if (!cs_active) {
omap2_mcspi_force_cs(spi, 1);
@@ -1013,6 +1023,14 @@
if (cs_active)
omap2_mcspi_force_cs(spi, 0);
+ if (cd && cd->cs_per_word) {
+ chconf = mcspi->ctx.modulctrl;
+ chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+ mcspi->ctx.modulctrl =
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+ }
+
omap2_mcspi_set_enable(spi, 0);
m->status = status;
@@ -1020,7 +1038,7 @@
}
static int omap2_mcspi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
+ struct spi_message *m)
{
struct omap2_mcspi *mcspi;
struct spi_transfer *t;
@@ -1041,7 +1059,7 @@
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
- || t->bits_per_word > 32))) {
+ || t->bits_per_word > 32))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@@ -1052,8 +1070,8 @@
}
if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
- t->speed_hz,
- OMAP2_MCSPI_MAX_FREQ >> 15);
+ t->speed_hz,
+ OMAP2_MCSPI_MAX_FREQ >> 15);
return -EINVAL;
}
@@ -1099,7 +1117,7 @@
return ret;
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
- OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+ OMAP2_MCSPI_WAKEUPENABLE_WKEN);
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
omap2_mcspi_set_master_mode(master);
@@ -1228,7 +1246,7 @@
sprintf(dma_ch_name, "rx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
status = -ENODEV;
@@ -1238,7 +1256,7 @@
mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
sprintf(dma_ch_name, "tx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
status = -ENODEV;
@@ -1254,7 +1272,7 @@
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
+ "pins are not configured from the driver\n");
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index b7e7182..66a5f82 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -366,7 +366,7 @@
return 0;
}
-static int __init orion_spi_reset(struct orion_spi *orion_spi)
+static int orion_spi_reset(struct orion_spi *orion_spi)
{
/* Verify that the CS is deasserted */
orion_spi_set_cs(orion_spi, 0);
@@ -396,7 +396,7 @@
return 0;
}
-static int __init orion_spi_probe(struct platform_device *pdev)
+static int orion_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct orion_spi *spi;
@@ -479,7 +479,7 @@
}
-static int __exit orion_spi_remove(struct platform_device *pdev)
+static int orion_spi_remove(struct platform_device *pdev)
{
struct spi_master *master;
struct resource *r;
@@ -513,20 +513,11 @@
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(orion_spi_of_match_table),
},
- .remove = __exit_p(orion_spi_remove),
+ .probe = orion_spi_probe,
+ .remove = orion_spi_remove,
};
-static int __init orion_spi_init(void)
-{
- return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
-}
-module_init(orion_spi_init);
-
-static void __exit orion_spi_exit(void)
-{
- platform_driver_unregister(&orion_spi_driver);
-}
-module_exit(orion_spi_exit);
+module_platform_driver(orion_spi_driver);
MODULE_DESCRIPTION("Orion SPI driver");
MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 7a85f22..357f183 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -389,7 +389,7 @@
/*
* platform_device layer stuff...
*/
-static int __init spi_ppc4xx_of_probe(struct platform_device *op)
+static int spi_ppc4xx_of_probe(struct platform_device *op)
{
struct ppc4xx_spi *hw;
struct spi_master *master;
@@ -419,7 +419,7 @@
* This includes both "null" gpio's and real ones.
*/
num_gpios = of_gpio_count(np);
- if (num_gpios) {
+ if (num_gpios > 0) {
int i;
hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL);
@@ -471,7 +471,7 @@
SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST;
/* this many pins in all GPIO controllers */
- bbp->master->num_chipselect = num_gpios;
+ bbp->master->num_chipselect = num_gpios > 0 ? num_gpios : 0;
/* Get the clock for the OPB */
opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb");
@@ -560,7 +560,7 @@
return ret;
}
-static int __exit spi_ppc4xx_of_remove(struct platform_device *op)
+static int spi_ppc4xx_of_remove(struct platform_device *op)
{
struct spi_master *master = dev_get_drvdata(&op->dev);
struct ppc4xx_spi *hw = spi_master_get_devdata(master);
@@ -583,7 +583,7 @@
static struct platform_driver spi_ppc4xx_of_driver = {
.probe = spi_ppc4xx_of_probe,
- .remove = __exit_p(spi_ppc4xx_of_remove),
+ .remove = spi_ppc4xx_of_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
new file mode 100644
index 0000000..c735c5a
--- /dev/null
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -0,0 +1,392 @@
+/*
+ * PXA2xx SPI DMA engine support.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/scatterlist.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include "spi-pxa2xx.h"
+
+static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data,
+ enum dma_data_direction dir)
+{
+ int i, nents, len = drv_data->len;
+ struct scatterlist *sg;
+ struct device *dmadev;
+ struct sg_table *sgt;
+ void *buf, *pbuf;
+
+ /*
+ * Some DMA controllers have problems transferring buffers that are
+ * not multiple of 4 bytes. So we truncate the transfer so that it
+ * is suitable for such controllers, and handle the trailing bytes
+ * manually after the DMA completes.
+ *
+ * REVISIT: It would be better if this information could be
+ * retrieved directly from the DMA device in a similar way than
+ * ->copy_align etc. is done.
+ */
+ len = ALIGN(drv_data->len, 4);
+
+ if (dir == DMA_TO_DEVICE) {
+ dmadev = drv_data->tx_chan->device->dev;
+ sgt = &drv_data->tx_sgt;
+ buf = drv_data->tx;
+ drv_data->tx_map_len = len;
+ } else {
+ dmadev = drv_data->rx_chan->device->dev;
+ sgt = &drv_data->rx_sgt;
+ buf = drv_data->rx;
+ drv_data->rx_map_len = len;
+ }
+
+ nents = DIV_ROUND_UP(len, SZ_2K);
+ if (nents != sgt->nents) {
+ int ret;
+
+ sg_free_table(sgt);
+ ret = sg_alloc_table(sgt, nents, GFP_KERNEL);
+ if (ret)
+ return ret;
+ }
+
+ pbuf = buf;
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes = min_t(size_t, len, SZ_2K);
+
+ if (buf)
+ sg_set_buf(sg, pbuf, bytes);
+ else
+ sg_set_buf(sg, drv_data->dummy, bytes);
+
+ pbuf += bytes;
+ len -= bytes;
+ }
+
+ nents = dma_map_sg(dmadev, sgt->sgl, sgt->nents, dir);
+ if (!nents)
+ return -ENOMEM;
+
+ return nents;
+}
+
+static void pxa2xx_spi_unmap_dma_buffer(struct driver_data *drv_data,
+ enum dma_data_direction dir)
+{
+ struct device *dmadev;
+ struct sg_table *sgt;
+
+ if (dir == DMA_TO_DEVICE) {
+ dmadev = drv_data->tx_chan->device->dev;
+ sgt = &drv_data->tx_sgt;
+ } else {
+ dmadev = drv_data->rx_chan->device->dev;
+ sgt = &drv_data->rx_sgt;
+ }
+
+ dma_unmap_sg(dmadev, sgt->sgl, sgt->nents, dir);
+}
+
+static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
+{
+ if (!drv_data->dma_mapped)
+ return;
+
+ pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_FROM_DEVICE);
+ pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE);
+
+ drv_data->dma_mapped = 0;
+}
+
+static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
+ bool error)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+
+ /*
+ * It is possible that one CPU is handling ROR interrupt and other
+ * just gets DMA completion. Calling pump_transfers() twice for the
+ * same transfer leads to problems thus we prevent concurrent calls
+ * by using ->dma_running.
+ */
+ if (atomic_dec_and_test(&drv_data->dma_running)) {
+ void __iomem *reg = drv_data->ioaddr;
+
+ /*
+ * If the other CPU is still handling the ROR interrupt we
+ * might not know about the error yet. So we re-check the
+ * ROR bit here before we clear the status register.
+ */
+ if (!error) {
+ u32 status = read_SSSR(reg) & drv_data->mask_sr;
+ error = status & SSSR_ROR;
+ }
+
+ /* Clear status & disable interrupts */
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+ if (!pxa25x_ssp_comp(drv_data))
+ write_SSTO(0, reg);
+
+ if (!error) {
+ pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+ /* Handle the last bytes of unaligned transfer */
+ drv_data->tx += drv_data->tx_map_len;
+ drv_data->write(drv_data);
+
+ drv_data->rx += drv_data->rx_map_len;
+ drv_data->read(drv_data);
+
+ msg->actual_length += drv_data->len;
+ msg->state = pxa2xx_spi_next_transfer(drv_data);
+ } else {
+ /* In case we got an error we disable the SSP now */
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+
+ msg->state = ERROR_STATE;
+ }
+
+ tasklet_schedule(&drv_data->pump_transfers);
+ }
+}
+
+static void pxa2xx_spi_dma_callback(void *data)
+{
+ pxa2xx_spi_dma_transfer_complete(data, false);
+}
+
+static struct dma_async_tx_descriptor *
+pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
+ enum dma_transfer_direction dir)
+{
+ struct pxa2xx_spi_master *pdata = drv_data->master_info;
+ struct chip_data *chip = drv_data->cur_chip;
+ enum dma_slave_buswidth width;
+ struct dma_slave_config cfg;
+ struct dma_chan *chan;
+ struct sg_table *sgt;
+ int nents, ret;
+
+ switch (drv_data->n_bytes) {
+ case 1:
+ width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ break;
+ case 2:
+ width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ default:
+ width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = drv_data->ssdr_physical;
+ cfg.dst_addr_width = width;
+ cfg.dst_maxburst = chip->dma_burst_size;
+ cfg.slave_id = pdata->tx_slave_id;
+
+ sgt = &drv_data->tx_sgt;
+ nents = drv_data->tx_nents;
+ chan = drv_data->tx_chan;
+ } else {
+ cfg.src_addr = drv_data->ssdr_physical;
+ cfg.src_addr_width = width;
+ cfg.src_maxburst = chip->dma_burst_size;
+ cfg.slave_id = pdata->rx_slave_id;
+
+ sgt = &drv_data->rx_sgt;
+ nents = drv_data->rx_nents;
+ chan = drv_data->rx_chan;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n");
+ return NULL;
+ }
+
+ return dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+}
+
+static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param)
+{
+ const struct pxa2xx_spi_master *pdata = param;
+
+ return chan->chan_id == pdata->tx_chan_id ||
+ chan->chan_id == pdata->rx_chan_id;
+}
+
+bool pxa2xx_spi_dma_is_possible(size_t len)
+{
+ return len <= MAX_DMA_LEN;
+}
+
+int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+ const struct chip_data *chip = drv_data->cur_chip;
+ int ret;
+
+ if (!chip->enable_dma)
+ return 0;
+
+ /* Don't bother with DMA if we can't do even a single burst */
+ if (drv_data->len < chip->dma_burst_size)
+ return 0;
+
+ ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_TO_DEVICE);
+ if (ret <= 0) {
+ dev_warn(&drv_data->pdev->dev, "failed to DMA map TX\n");
+ return 0;
+ }
+
+ drv_data->tx_nents = ret;
+
+ ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_FROM_DEVICE);
+ if (ret <= 0) {
+ pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE);
+ dev_warn(&drv_data->pdev->dev, "failed to DMA map RX\n");
+ return 0;
+ }
+
+ drv_data->rx_nents = ret;
+ return 1;
+}
+
+irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
+{
+ u32 status;
+
+ status = read_SSSR(drv_data->ioaddr) & drv_data->mask_sr;
+ if (status & SSSR_ROR) {
+ dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
+
+ dmaengine_terminate_all(drv_data->rx_chan);
+ dmaengine_terminate_all(drv_data->tx_chan);
+
+ pxa2xx_spi_dma_transfer_complete(drv_data, true);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
+{
+ struct dma_async_tx_descriptor *tx_desc, *rx_desc;
+
+ tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV);
+ if (!tx_desc) {
+ dev_err(&drv_data->pdev->dev,
+ "failed to get DMA TX descriptor\n");
+ return -EBUSY;
+ }
+
+ rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM);
+ if (!rx_desc) {
+ dev_err(&drv_data->pdev->dev,
+ "failed to get DMA RX descriptor\n");
+ return -EBUSY;
+ }
+
+ /* We are ready when RX completes */
+ rx_desc->callback = pxa2xx_spi_dma_callback;
+ rx_desc->callback_param = drv_data;
+
+ dmaengine_submit(rx_desc);
+ dmaengine_submit(tx_desc);
+ return 0;
+}
+
+void pxa2xx_spi_dma_start(struct driver_data *drv_data)
+{
+ dma_async_issue_pending(drv_data->rx_chan);
+ dma_async_issue_pending(drv_data->tx_chan);
+
+ atomic_set(&drv_data->dma_running, 1);
+}
+
+int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+ struct pxa2xx_spi_master *pdata = drv_data->master_info;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ drv_data->dummy = devm_kzalloc(&drv_data->pdev->dev, SZ_2K, GFP_KERNEL);
+ if (!drv_data->dummy)
+ return -ENOMEM;
+
+ drv_data->tx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter,
+ pdata);
+ if (!drv_data->tx_chan)
+ return -ENODEV;
+
+ drv_data->rx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter,
+ pdata);
+ if (!drv_data->rx_chan) {
+ dma_release_channel(drv_data->tx_chan);
+ drv_data->tx_chan = NULL;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+void pxa2xx_spi_dma_release(struct driver_data *drv_data)
+{
+ if (drv_data->rx_chan) {
+ dmaengine_terminate_all(drv_data->rx_chan);
+ dma_release_channel(drv_data->rx_chan);
+ sg_free_table(&drv_data->rx_sgt);
+ drv_data->rx_chan = NULL;
+ }
+ if (drv_data->tx_chan) {
+ dmaengine_terminate_all(drv_data->tx_chan);
+ dma_release_channel(drv_data->tx_chan);
+ sg_free_table(&drv_data->tx_sgt);
+ drv_data->tx_chan = NULL;
+ }
+}
+
+void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
+{
+}
+
+int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+ struct spi_device *spi,
+ u8 bits_per_word, u32 *burst_code,
+ u32 *threshold)
+{
+ struct pxa2xx_spi_chip *chip_info = spi->controller_data;
+
+ /*
+ * If the DMA burst size is given in chip_info we use that,
+ * otherwise we use the default. Also we use the default FIFO
+ * thresholds for now.
+ */
+ *burst_code = chip_info ? chip_info->dma_burst_size : 16;
+ *threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
+ | SSCR1_TxTresh(TX_THRESH_DFLT);
+
+ return 0;
+}
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index cf95587..364964d 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -8,147 +8,58 @@
#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>
-struct ce4100_info {
- struct ssp_device ssp;
- struct platform_device *spi_pdev;
-};
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
- struct ssp_device *ssp = NULL;
-
- mutex_lock(&ssp_lock);
-
- list_for_each_entry(ssp, &ssp_list, node) {
- if (ssp->port_id == port && ssp->use_count == 0) {
- ssp->use_count++;
- ssp->label = label;
- break;
- }
- }
-
- mutex_unlock(&ssp_lock);
-
- if (&ssp->node == &ssp_list)
- return NULL;
-
- return ssp;
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_request);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
- mutex_lock(&ssp_lock);
- if (ssp->use_count) {
- ssp->use_count--;
- ssp->label = NULL;
- } else
- dev_err(&ssp->pdev->dev, "device already free\n");
- mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_free);
-
static int ce4100_spi_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
+ struct platform_device_info pi;
int ret;
- resource_size_t phys_beg;
- resource_size_t phys_len;
- struct ce4100_info *spi_info;
struct platform_device *pdev;
struct pxa2xx_spi_master spi_pdata;
struct ssp_device *ssp;
- ret = pci_enable_device(dev);
+ ret = pcim_enable_device(dev);
if (ret)
return ret;
- phys_beg = pci_resource_start(dev, 0);
- phys_len = pci_resource_len(dev, 0);
-
- if (!request_mem_region(phys_beg, phys_len,
- "CE4100 SPI")) {
- dev_err(&dev->dev, "Can't request register space.\n");
- ret = -EBUSY;
+ ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI");
+ if (!ret)
return ret;
- }
- pdev = platform_device_alloc("pxa2xx-spi", dev->devfn);
- spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
- if (!pdev || !spi_info ) {
- ret = -ENOMEM;
- goto err_nomem;
- }
memset(&spi_pdata, 0, sizeof(spi_pdata));
spi_pdata.num_chipselect = dev->devfn;
- ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata));
- if (ret)
- goto err_nomem;
-
- pdev->dev.parent = &dev->dev;
- pdev->dev.of_node = dev->dev.of_node;
- ssp = &spi_info->ssp;
+ ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
- ssp->mmio_base = ioremap(phys_beg, phys_len);
+ ssp->mmio_base = pcim_iomap_table(dev)[0];
if (!ssp->mmio_base) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -EIO;
- goto err_nomem;
+ dev_err(&dev->dev, "failed to ioremap() registers\n");
+ return -EIO;
}
ssp->irq = dev->irq;
- ssp->port_id = pdev->id;
+ ssp->port_id = dev->devfn;
ssp->type = PXA25x_SSP;
- mutex_lock(&ssp_lock);
- list_add(&ssp->node, &ssp_list);
- mutex_unlock(&ssp_lock);
+ memset(&pi, 0, sizeof(pi));
+ pi.parent = &dev->dev;
+ pi.name = "pxa2xx-spi";
+ pi.id = ssp->port_id;
+ pi.data = &spi_pdata;
+ pi.size_data = sizeof(spi_pdata);
- pci_set_drvdata(dev, spi_info);
+ pdev = platform_device_register_full(&pi);
+ if (!pdev)
+ return -ENOMEM;
- ret = platform_device_add(pdev);
- if (ret)
- goto err_dev_add;
+ pci_set_drvdata(dev, pdev);
- return ret;
-
-err_dev_add:
- pci_set_drvdata(dev, NULL);
- mutex_lock(&ssp_lock);
- list_del(&ssp->node);
- mutex_unlock(&ssp_lock);
- iounmap(ssp->mmio_base);
-
-err_nomem:
- release_mem_region(phys_beg, phys_len);
- platform_device_put(pdev);
- kfree(spi_info);
- return ret;
+ return 0;
}
static void ce4100_spi_remove(struct pci_dev *dev)
{
- struct ce4100_info *spi_info;
- struct ssp_device *ssp;
+ struct platform_device *pdev = pci_get_drvdata(dev);
- spi_info = pci_get_drvdata(dev);
- ssp = &spi_info->ssp;
- platform_device_unregister(spi_info->spi_pdev);
-
- iounmap(ssp->mmio_base);
- release_mem_region(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
-
- mutex_lock(&ssp_lock);
- list_del(&ssp->node);
- mutex_unlock(&ssp_lock);
-
- pci_set_drvdata(dev, NULL);
- pci_disable_device(dev);
- kfree(spi_info);
+ platform_device_unregister(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = {
diff --git a/drivers/spi/spi-pxa2xx-pxadma.c b/drivers/spi/spi-pxa2xx-pxadma.c
new file mode 100644
index 0000000..2916efc
--- /dev/null
+++ b/drivers/spi/spi-pxa2xx-pxadma.c
@@ -0,0 +1,490 @@
+/*
+ * PXA2xx SPI private DMA support.
+ *
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include "spi-pxa2xx.h"
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+
+bool pxa2xx_spi_dma_is_possible(size_t len)
+{
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ return len > 0 && len <= MAX_DMA_LEN;
+}
+
+int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+ struct device *dev = &msg->spi->dev;
+
+ if (!drv_data->cur_chip->enable_dma)
+ return 0;
+
+ if (msg->is_dma_mapped)
+ return drv_data->rx_dma && drv_data->tx_dma;
+
+ if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+ return 0;
+
+ /* Modify setup if rx buffer is null */
+ if (drv_data->rx == NULL) {
+ *drv_data->null_dma_buf = 0;
+ drv_data->rx = drv_data->null_dma_buf;
+ drv_data->rx_map_len = 4;
+ } else
+ drv_data->rx_map_len = drv_data->len;
+
+
+ /* Modify setup if tx buffer is null */
+ if (drv_data->tx == NULL) {
+ *drv_data->null_dma_buf = 0;
+ drv_data->tx = drv_data->null_dma_buf;
+ drv_data->tx_map_len = 4;
+ } else
+ drv_data->tx_map_len = drv_data->len;
+
+ /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
+ * so we flush the cache *before* invalidating it, in case
+ * the tx and rx buffers overlap.
+ */
+ drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+ drv_data->tx_map_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, drv_data->tx_dma))
+ return 0;
+
+ /* Stream map the rx buffer */
+ drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+ drv_data->rx_map_len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, drv_data->rx_dma)) {
+ dma_unmap_single(dev, drv_data->tx_dma,
+ drv_data->tx_map_len, DMA_TO_DEVICE);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
+{
+ struct device *dev;
+
+ if (!drv_data->dma_mapped)
+ return;
+
+ if (!drv_data->cur_msg->is_dma_mapped) {
+ dev = &drv_data->cur_msg->spi->dev;
+ dma_unmap_single(dev, drv_data->rx_dma,
+ drv_data->rx_map_len, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, drv_data->tx_dma,
+ drv_data->tx_map_len, DMA_TO_DEVICE);
+ }
+
+ drv_data->dma_mapped = 0;
+}
+
+static int wait_ssp_rx_stall(void const __iomem *ioaddr)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
+ cpu_relax();
+
+ return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
+ cpu_relax();
+
+ return limit;
+}
+
+static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
+ const char *msg)
+{
+ void __iomem *reg = drv_data->ioaddr;
+
+ /* Stop and reset */
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ if (!pxa25x_ssp_comp(drv_data))
+ write_SSTO(0, reg);
+ pxa2xx_spi_flush(drv_data);
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+
+ pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+ dev_err(&drv_data->pdev->dev, "%s\n", msg);
+
+ drv_data->cur_msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
+{
+ void __iomem *reg = drv_data->ioaddr;
+ struct spi_message *msg = drv_data->cur_msg;
+
+ /* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+ if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: dma rx channel stop failed\n");
+
+ if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_transfer: ssp rx stall failed\n");
+
+ pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+ /* update the buffer pointer for the amount completed in dma */
+ drv_data->rx += drv_data->len -
+ (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
+
+ /* read trailing data from fifo, it does not matter how many
+ * bytes are in the fifo just read until buffer is full
+ * or fifo is empty, which ever occurs first */
+ drv_data->read(drv_data);
+
+ /* return count of what was actually read */
+ msg->actual_length += drv_data->len -
+ (drv_data->rx_end - drv_data->rx);
+
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
+
+ /* Move to next transfer */
+ msg->state = pxa2xx_spi_next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+}
+
+void pxa2xx_spi_dma_handler(int channel, void *data)
+{
+ struct driver_data *drv_data = data;
+ u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+
+ if (irq_status & DCSR_BUSERR) {
+
+ if (channel == drv_data->tx_channel)
+ pxa2xx_spi_dma_error_stop(drv_data,
+ "dma_handler: bad bus address on tx channel");
+ else
+ pxa2xx_spi_dma_error_stop(drv_data,
+ "dma_handler: bad bus address on rx channel");
+ return;
+ }
+
+ /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+ if ((channel == drv_data->tx_channel)
+ && (irq_status & DCSR_ENDINTR)
+ && (drv_data->ssp_type == PXA25x_SSP)) {
+
+ /* Wait for rx to stall */
+ if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: ssp rx stall failed\n");
+
+ /* finish this transfer, start the next */
+ pxa2xx_spi_dma_transfer_complete(drv_data);
+ }
+}
+
+irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
+{
+ u32 irq_status;
+ void __iomem *reg = drv_data->ioaddr;
+
+ irq_status = read_SSSR(reg) & drv_data->mask_sr;
+ if (irq_status & SSSR_ROR) {
+ pxa2xx_spi_dma_error_stop(drv_data,
+ "dma_transfer: fifo overrun");
+ return IRQ_HANDLED;
+ }
+
+ /* Check for false positive timeout */
+ if ((irq_status & SSSR_TINT)
+ && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
+ write_SSSR(SSSR_TINT, reg);
+ return IRQ_HANDLED;
+ }
+
+ if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+ /* Clear and disable timeout interrupt, do the rest in
+ * dma_transfer_complete */
+ if (!pxa25x_ssp_comp(drv_data))
+ write_SSTO(0, reg);
+
+ /* finish this transfer, start the next */
+ pxa2xx_spi_dma_transfer_complete(drv_data);
+
+ return IRQ_HANDLED;
+ }
+
+ /* Opps problem detected */
+ return IRQ_NONE;
+}
+
+int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
+{
+ u32 dma_width;
+
+ switch (drv_data->n_bytes) {
+ case 1:
+ dma_width = DCMD_WIDTH1;
+ break;
+ case 2:
+ dma_width = DCMD_WIDTH2;
+ break;
+ default:
+ dma_width = DCMD_WIDTH4;
+ break;
+ }
+
+ /* Setup rx DMA Channel */
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+ DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+ if (drv_data->rx == drv_data->null_dma_buf)
+ /* No target address increment */
+ DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+ | dma_width
+ | dma_burst
+ | drv_data->len;
+ else
+ DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+ | DCMD_FLOWSRC
+ | dma_width
+ | dma_burst
+ | drv_data->len;
+
+ /* Setup tx DMA Channel */
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+ DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+ if (drv_data->tx == drv_data->null_dma_buf)
+ /* No source address increment */
+ DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+ | dma_width
+ | dma_burst
+ | drv_data->len;
+ else
+ DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+ | DCMD_FLOWTRG
+ | dma_width
+ | dma_burst
+ | drv_data->len;
+
+ /* Enable dma end irqs on SSP to detect end of transfer */
+ if (drv_data->ssp_type == PXA25x_SSP)
+ DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+ return 0;
+}
+
+void pxa2xx_spi_dma_start(struct driver_data *drv_data)
+{
+ DCSR(drv_data->rx_channel) |= DCSR_RUN;
+ DCSR(drv_data->tx_channel) |= DCSR_RUN;
+}
+
+int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+ struct device *dev = &drv_data->pdev->dev;
+ struct ssp_device *ssp = drv_data->ssp;
+
+ /* Get two DMA channels (rx and tx) */
+ drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+ DMA_PRIO_HIGH,
+ pxa2xx_spi_dma_handler,
+ drv_data);
+ if (drv_data->rx_channel < 0) {
+ dev_err(dev, "problem (%d) requesting rx channel\n",
+ drv_data->rx_channel);
+ return -ENODEV;
+ }
+ drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+ DMA_PRIO_MEDIUM,
+ pxa2xx_spi_dma_handler,
+ drv_data);
+ if (drv_data->tx_channel < 0) {
+ dev_err(dev, "problem (%d) requesting tx channel\n",
+ drv_data->tx_channel);
+ pxa_free_dma(drv_data->rx_channel);
+ return -ENODEV;
+ }
+
+ DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+ DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
+
+ return 0;
+}
+
+void pxa2xx_spi_dma_release(struct driver_data *drv_data)
+{
+ struct ssp_device *ssp = drv_data->ssp;
+
+ DRCMR(ssp->drcmr_rx) = 0;
+ DRCMR(ssp->drcmr_tx) = 0;
+
+ if (drv_data->tx_channel != 0)
+ pxa_free_dma(drv_data->tx_channel);
+ if (drv_data->rx_channel != 0)
+ pxa_free_dma(drv_data->rx_channel);
+}
+
+void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
+{
+ if (drv_data->rx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_rx) =
+ DRCMR_MAPVLD | drv_data->rx_channel;
+ if (drv_data->tx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_tx) =
+ DRCMR_MAPVLD | drv_data->tx_channel;
+}
+
+int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+ struct spi_device *spi,
+ u8 bits_per_word, u32 *burst_code,
+ u32 *threshold)
+{
+ struct pxa2xx_spi_chip *chip_info =
+ (struct pxa2xx_spi_chip *)spi->controller_data;
+ int bytes_per_word;
+ int burst_bytes;
+ int thresh_words;
+ int req_burst_size;
+ int retval = 0;
+
+ /* Set the threshold (in registers) to equal the same amount of data
+ * as represented by burst size (in bytes). The computation below
+ * is (burst_size rounded up to nearest 8 byte, word or long word)
+ * divided by (bytes/register); the tx threshold is the inverse of
+ * the rx, so that there will always be enough data in the rx fifo
+ * to satisfy a burst, and there will always be enough space in the
+ * tx fifo to accept a burst (a tx burst will overwrite the fifo if
+ * there is not enough space), there must always remain enough empty
+ * space in the rx fifo for any data loaded to the tx fifo.
+ * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
+ * will be 8, or half the fifo;
+ * The threshold can only be set to 2, 4 or 8, but not 16, because
+ * to burst 16 to the tx fifo, the fifo would have to be empty;
+ * however, the minimum fifo trigger level is 1, and the tx will
+ * request service when the fifo is at this level, with only 15 spaces.
+ */
+
+ /* find bytes/word */
+ if (bits_per_word <= 8)
+ bytes_per_word = 1;
+ else if (bits_per_word <= 16)
+ bytes_per_word = 2;
+ else
+ bytes_per_word = 4;
+
+ /* use struct pxa2xx_spi_chip->dma_burst_size if available */
+ if (chip_info)
+ req_burst_size = chip_info->dma_burst_size;
+ else {
+ switch (chip->dma_burst_size) {
+ default:
+ /* if the default burst size is not set,
+ * do it now */
+ chip->dma_burst_size = DCMD_BURST8;
+ case DCMD_BURST8:
+ req_burst_size = 8;
+ break;
+ case DCMD_BURST16:
+ req_burst_size = 16;
+ break;
+ case DCMD_BURST32:
+ req_burst_size = 32;
+ break;
+ }
+ }
+ if (req_burst_size <= 8) {
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ } else if (req_burst_size <= 16) {
+ if (bytes_per_word == 1) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ retval = 1;
+ } else {
+ *burst_code = DCMD_BURST16;
+ burst_bytes = 16;
+ }
+ } else {
+ if (bytes_per_word == 1) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ retval = 1;
+ } else if (bytes_per_word == 2) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST16;
+ burst_bytes = 16;
+ retval = 1;
+ } else {
+ *burst_code = DCMD_BURST32;
+ burst_bytes = 32;
+ }
+ }
+
+ thresh_words = burst_bytes / bytes_per_word;
+
+ /* thresh_words will be between 2 and 8 */
+ *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
+ | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
+
+ return retval;
+}
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 5c8c4f5..90b27a3 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ * Copyright (C) 2013, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,17 +25,20 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/spi/pxa2xx_spi.h>
-#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/acpi.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
+#include "spi-pxa2xx.h"
MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
@@ -45,12 +49,6 @@
#define TIMOUT_DFLT 1000
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0)
-#define MAX_DMA_LEN 8191
-#define DMA_ALIGNMENT 8
-
/*
* for testing SSCR1 changes that require SSP restart, basically
* everything except the service and interrupt enables, the pxa270 developer
@@ -65,115 +63,97 @@
| SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
-#define DEFINE_SSP_REG(reg, off) \
-static inline u32 read_##reg(void const __iomem *p) \
-{ return __raw_readl(p + (off)); } \
-\
-static inline void write_##reg(u32 v, void __iomem *p) \
-{ __raw_writel(v, p + (off)); }
+#define LPSS_RX_THRESH_DFLT 64
+#define LPSS_TX_LOTHRESH_DFLT 160
+#define LPSS_TX_HITHRESH_DFLT 224
-DEFINE_SSP_REG(SSCR0, 0x00)
-DEFINE_SSP_REG(SSCR1, 0x04)
-DEFINE_SSP_REG(SSSR, 0x08)
-DEFINE_SSP_REG(SSITR, 0x0c)
-DEFINE_SSP_REG(SSDR, 0x10)
-DEFINE_SSP_REG(SSTO, 0x28)
-DEFINE_SSP_REG(SSPSP, 0x2c)
+/* Offset from drv_data->lpss_base */
+#define SPI_CS_CONTROL 0x18
+#define SPI_CS_CONTROL_SW_MODE BIT(0)
+#define SPI_CS_CONTROL_CS_HIGH BIT(1)
-#define START_STATE ((void*)0)
-#define RUNNING_STATE ((void*)1)
-#define DONE_STATE ((void*)2)
-#define ERROR_STATE ((void*)-1)
+static bool is_lpss_ssp(const struct driver_data *drv_data)
+{
+ return drv_data->ssp_type == LPSS_SSP;
+}
-#define QUEUE_RUNNING 0
-#define QUEUE_STOPPED 1
+/*
+ * Read and write LPSS SSP private registers. Caller must first check that
+ * is_lpss_ssp() returns true before these can be called.
+ */
+static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset)
+{
+ WARN_ON(!drv_data->lpss_base);
+ return readl(drv_data->lpss_base + offset);
+}
-struct driver_data {
- /* Driver model hookup */
- struct platform_device *pdev;
+static void __lpss_ssp_write_priv(struct driver_data *drv_data,
+ unsigned offset, u32 value)
+{
+ WARN_ON(!drv_data->lpss_base);
+ writel(value, drv_data->lpss_base + offset);
+}
- /* SSP Info */
- struct ssp_device *ssp;
+/*
+ * lpss_ssp_setup - perform LPSS SSP specific setup
+ * @drv_data: pointer to the driver private data
+ *
+ * Perform LPSS SSP specific setup. This function must be called first if
+ * one is going to use LPSS SSP private registers.
+ */
+static void lpss_ssp_setup(struct driver_data *drv_data)
+{
+ unsigned offset = 0x400;
+ u32 value, orig;
- /* SPI framework hookup */
- enum pxa_ssp_type ssp_type;
- struct spi_master *master;
+ if (!is_lpss_ssp(drv_data))
+ return;
- /* PXA hookup */
- struct pxa2xx_spi_master *master_info;
+ /*
+ * Perform auto-detection of the LPSS SSP private registers. They
+ * can be either at 1k or 2k offset from the base address.
+ */
+ orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
- /* DMA setup stuff */
- int rx_channel;
- int tx_channel;
- u32 *null_dma_buf;
+ value = orig | SPI_CS_CONTROL_SW_MODE;
+ writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
+ value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
+ if (value != (orig | SPI_CS_CONTROL_SW_MODE)) {
+ offset = 0x800;
+ goto detection_done;
+ }
- /* SSP register addresses */
- void __iomem *ioaddr;
- u32 ssdr_physical;
+ value &= ~SPI_CS_CONTROL_SW_MODE;
+ writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
+ value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
+ if (value != orig) {
+ offset = 0x800;
+ goto detection_done;
+ }
- /* SSP masks*/
- u32 dma_cr1;
- u32 int_cr1;
- u32 clear_sr;
- u32 mask_sr;
+detection_done:
+ /* Now set the LPSS base */
+ drv_data->lpss_base = drv_data->ioaddr + offset;
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct pump_messages;
- spinlock_t lock;
- struct list_head queue;
- int busy;
- int run;
+ /* Enable software chip select control */
+ value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
+ __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+}
- /* Message Transfer pump */
- struct tasklet_struct pump_transfers;
+static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
+{
+ u32 value;
- /* Current message transfer state info */
- struct spi_message* cur_msg;
- struct spi_transfer* cur_transfer;
- struct chip_data *cur_chip;
- size_t len;
- void *tx;
- void *tx_end;
- void *rx;
- void *rx_end;
- int dma_mapped;
- dma_addr_t rx_dma;
- dma_addr_t tx_dma;
- size_t rx_map_len;
- size_t tx_map_len;
- u8 n_bytes;
- u32 dma_width;
- int (*write)(struct driver_data *drv_data);
- int (*read)(struct driver_data *drv_data);
- irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
- void (*cs_control)(u32 command);
-};
+ if (!is_lpss_ssp(drv_data))
+ return;
-struct chip_data {
- u32 cr0;
- u32 cr1;
- u32 psp;
- u32 timeout;
- u8 n_bytes;
- u32 dma_width;
- u32 dma_burst_size;
- u32 threshold;
- u32 dma_threshold;
- u8 enable_dma;
- u8 bits_per_word;
- u32 speed_hz;
- union {
- int gpio_cs;
- unsigned int frm;
- };
- int gpio_cs_inverted;
- int (*write)(struct driver_data *drv_data);
- int (*read)(struct driver_data *drv_data);
- void (*cs_control)(u32 command);
-};
-
-static void pump_messages(struct work_struct *work);
+ value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL);
+ if (enable)
+ value &= ~SPI_CS_CONTROL_CS_HIGH;
+ else
+ value |= SPI_CS_CONTROL_CS_HIGH;
+ __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+}
static void cs_assert(struct driver_data *drv_data)
{
@@ -189,8 +169,12 @@
return;
}
- if (gpio_is_valid(chip->gpio_cs))
+ if (gpio_is_valid(chip->gpio_cs)) {
gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted);
+ return;
+ }
+
+ lpss_ssp_cs_control(drv_data, true);
}
static void cs_deassert(struct driver_data *drv_data)
@@ -205,30 +189,15 @@
return;
}
- if (gpio_is_valid(chip->gpio_cs))
+ if (gpio_is_valid(chip->gpio_cs)) {
gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted);
+ return;
+ }
+
+ lpss_ssp_cs_control(drv_data, false);
}
-static void write_SSSR_CS(struct driver_data *drv_data, u32 val)
-{
- void __iomem *reg = drv_data->ioaddr;
-
- if (drv_data->ssp_type == CE4100_SSP)
- val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
-
- write_SSSR(val, reg);
-}
-
-static int pxa25x_ssp_comp(struct driver_data *drv_data)
-{
- if (drv_data->ssp_type == PXA25x_SSP)
- return 1;
- if (drv_data->ssp_type == CE4100_SSP)
- return 1;
- return 0;
-}
-
-static int flush(struct driver_data *drv_data)
+int pxa2xx_spi_flush(struct driver_data *drv_data)
{
unsigned long limit = loops_per_jiffy << 1;
@@ -354,7 +323,7 @@
return drv_data->rx == drv_data->rx_end;
}
-static void *next_transfer(struct driver_data *drv_data)
+void *pxa2xx_spi_next_transfer(struct driver_data *drv_data)
{
struct spi_message *msg = drv_data->cur_msg;
struct spi_transfer *trans = drv_data->cur_transfer;
@@ -370,89 +339,15 @@
return DONE_STATE;
}
-static int map_dma_buffers(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- struct device *dev = &msg->spi->dev;
-
- if (!drv_data->cur_chip->enable_dma)
- return 0;
-
- if (msg->is_dma_mapped)
- return drv_data->rx_dma && drv_data->tx_dma;
-
- if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
- return 0;
-
- /* Modify setup if rx buffer is null */
- if (drv_data->rx == NULL) {
- *drv_data->null_dma_buf = 0;
- drv_data->rx = drv_data->null_dma_buf;
- drv_data->rx_map_len = 4;
- } else
- drv_data->rx_map_len = drv_data->len;
-
-
- /* Modify setup if tx buffer is null */
- if (drv_data->tx == NULL) {
- *drv_data->null_dma_buf = 0;
- drv_data->tx = drv_data->null_dma_buf;
- drv_data->tx_map_len = 4;
- } else
- drv_data->tx_map_len = drv_data->len;
-
- /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
- * so we flush the cache *before* invalidating it, in case
- * the tx and rx buffers overlap.
- */
- drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- if (dma_mapping_error(dev, drv_data->tx_dma))
- return 0;
-
- /* Stream map the rx buffer */
- drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
- drv_data->rx_map_len, DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, drv_data->rx_dma)) {
- dma_unmap_single(dev, drv_data->tx_dma,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- return 0;
- }
-
- return 1;
-}
-
-static void unmap_dma_buffers(struct driver_data *drv_data)
-{
- struct device *dev;
-
- if (!drv_data->dma_mapped)
- return;
-
- if (!drv_data->cur_msg->is_dma_mapped) {
- dev = &drv_data->cur_msg->spi->dev;
- dma_unmap_single(dev, drv_data->rx_dma,
- drv_data->rx_map_len, DMA_FROM_DEVICE);
- dma_unmap_single(dev, drv_data->tx_dma,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- }
-
- drv_data->dma_mapped = 0;
-}
-
/* caller already set message->status; dma and pio irqs are blocked */
static void giveback(struct driver_data *drv_data)
{
struct spi_transfer* last_transfer;
- unsigned long flags;
struct spi_message *msg;
- spin_lock_irqsave(&drv_data->lock, flags);
msg = drv_data->cur_msg;
drv_data->cur_msg = NULL;
drv_data->cur_transfer = NULL;
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
- spin_unlock_irqrestore(&drv_data->lock, flags);
last_transfer = list_entry(msg->transfers.prev,
struct spi_transfer,
@@ -481,13 +376,7 @@
*/
/* get a pointer to the next message, if any */
- spin_lock_irqsave(&drv_data->lock, flags);
- if (list_empty(&drv_data->queue))
- next_msg = NULL;
- else
- next_msg = list_entry(drv_data->queue.next,
- struct spi_message, queue);
- spin_unlock_irqrestore(&drv_data->lock, flags);
+ next_msg = spi_get_next_queued_message(drv_data->master);
/* see if the next and current messages point
* to the same chip
@@ -498,168 +387,10 @@
cs_deassert(drv_data);
}
- msg->state = NULL;
- if (msg->complete)
- msg->complete(msg->context);
-
+ spi_finalize_current_message(drv_data->master);
drv_data->cur_chip = NULL;
}
-static int wait_ssp_rx_stall(void const __iomem *ioaddr)
-{
- unsigned long limit = loops_per_jiffy << 1;
-
- while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
- cpu_relax();
-
- return limit;
-}
-
-static int wait_dma_channel_stop(int channel)
-{
- unsigned long limit = loops_per_jiffy << 1;
-
- while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
- cpu_relax();
-
- return limit;
-}
-
-static void dma_error_stop(struct driver_data *drv_data, const char *msg)
-{
- void __iomem *reg = drv_data->ioaddr;
-
- /* Stop and reset */
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- write_SSSR_CS(drv_data, drv_data->clear_sr);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- if (!pxa25x_ssp_comp(drv_data))
- write_SSTO(0, reg);
- flush(drv_data);
- write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
-
- unmap_dma_buffers(drv_data);
-
- dev_err(&drv_data->pdev->dev, "%s\n", msg);
-
- drv_data->cur_msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void dma_transfer_complete(struct driver_data *drv_data)
-{
- void __iomem *reg = drv_data->ioaddr;
- struct spi_message *msg = drv_data->cur_msg;
-
- /* Clear and disable interrupts on SSP and DMA channels*/
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- write_SSSR_CS(drv_data, drv_data->clear_sr);
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
-
- if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: dma rx channel stop failed\n");
-
- if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_transfer: ssp rx stall failed\n");
-
- unmap_dma_buffers(drv_data);
-
- /* update the buffer pointer for the amount completed in dma */
- drv_data->rx += drv_data->len -
- (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
-
- /* read trailing data from fifo, it does not matter how many
- * bytes are in the fifo just read until buffer is full
- * or fifo is empty, which ever occurs first */
- drv_data->read(drv_data);
-
- /* return count of what was actually read */
- msg->actual_length += drv_data->len -
- (drv_data->rx_end - drv_data->rx);
-
- /* Transfer delays and chip select release are
- * handled in pump_transfers or giveback
- */
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void dma_handler(int channel, void *data)
-{
- struct driver_data *drv_data = data;
- u32 irq_status = DCSR(channel) & DMA_INT_MASK;
-
- if (irq_status & DCSR_BUSERR) {
-
- if (channel == drv_data->tx_channel)
- dma_error_stop(drv_data,
- "dma_handler: "
- "bad bus address on tx channel");
- else
- dma_error_stop(drv_data,
- "dma_handler: "
- "bad bus address on rx channel");
- return;
- }
-
- /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
- if ((channel == drv_data->tx_channel)
- && (irq_status & DCSR_ENDINTR)
- && (drv_data->ssp_type == PXA25x_SSP)) {
-
- /* Wait for rx to stall */
- if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: ssp rx stall failed\n");
-
- /* finish this transfer, start the next */
- dma_transfer_complete(drv_data);
- }
-}
-
-static irqreturn_t dma_transfer(struct driver_data *drv_data)
-{
- u32 irq_status;
- void __iomem *reg = drv_data->ioaddr;
-
- irq_status = read_SSSR(reg) & drv_data->mask_sr;
- if (irq_status & SSSR_ROR) {
- dma_error_stop(drv_data, "dma_transfer: fifo overrun");
- return IRQ_HANDLED;
- }
-
- /* Check for false positive timeout */
- if ((irq_status & SSSR_TINT)
- && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
- write_SSSR(SSSR_TINT, reg);
- return IRQ_HANDLED;
- }
-
- if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
-
- /* Clear and disable timeout interrupt, do the rest in
- * dma_transfer_complete */
- if (!pxa25x_ssp_comp(drv_data))
- write_SSTO(0, reg);
-
- /* finish this transfer, start the next */
- dma_transfer_complete(drv_data);
-
- return IRQ_HANDLED;
- }
-
- /* Opps problem detected */
- return IRQ_NONE;
-}
-
static void reset_sccr1(struct driver_data *drv_data)
{
void __iomem *reg = drv_data->ioaddr;
@@ -681,7 +412,7 @@
reset_sccr1(drv_data);
if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
- flush(drv_data);
+ pxa2xx_spi_flush(drv_data);
write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
dev_err(&drv_data->pdev->dev, "%s\n", msg);
@@ -709,7 +440,7 @@
*/
/* Move to next transfer */
- drv_data->cur_msg->state = next_transfer(drv_data);
+ drv_data->cur_msg->state = pxa2xx_spi_next_transfer(drv_data);
/* Schedule transfer tasklet */
tasklet_schedule(&drv_data->pump_transfers);
@@ -789,10 +520,20 @@
{
struct driver_data *drv_data = dev_id;
void __iomem *reg = drv_data->ioaddr;
- u32 sccr1_reg = read_SSCR1(reg);
+ u32 sccr1_reg;
u32 mask = drv_data->mask_sr;
u32 status;
+ /*
+ * The IRQ might be shared with other peripherals so we must first
+ * check that are we RPM suspended or not. If we are we assume that
+ * the IRQ was not for us (we shouldn't be RPM suspended when the
+ * interrupt is enabled).
+ */
+ if (pm_runtime_suspended(&drv_data->pdev->dev))
+ return IRQ_NONE;
+
+ sccr1_reg = read_SSCR1(reg);
status = read_SSSR(reg);
/* Ignore possible writes if we don't need to write */
@@ -820,106 +561,12 @@
return drv_data->transfer_handler(drv_data);
}
-static int set_dma_burst_and_threshold(struct chip_data *chip,
- struct spi_device *spi,
- u8 bits_per_word, u32 *burst_code,
- u32 *threshold)
+static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
{
- struct pxa2xx_spi_chip *chip_info =
- (struct pxa2xx_spi_chip *)spi->controller_data;
- int bytes_per_word;
- int burst_bytes;
- int thresh_words;
- int req_burst_size;
- int retval = 0;
+ unsigned long ssp_clk = drv_data->max_clk_rate;
+ const struct ssp_device *ssp = drv_data->ssp;
- /* Set the threshold (in registers) to equal the same amount of data
- * as represented by burst size (in bytes). The computation below
- * is (burst_size rounded up to nearest 8 byte, word or long word)
- * divided by (bytes/register); the tx threshold is the inverse of
- * the rx, so that there will always be enough data in the rx fifo
- * to satisfy a burst, and there will always be enough space in the
- * tx fifo to accept a burst (a tx burst will overwrite the fifo if
- * there is not enough space), there must always remain enough empty
- * space in the rx fifo for any data loaded to the tx fifo.
- * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
- * will be 8, or half the fifo;
- * The threshold can only be set to 2, 4 or 8, but not 16, because
- * to burst 16 to the tx fifo, the fifo would have to be empty;
- * however, the minimum fifo trigger level is 1, and the tx will
- * request service when the fifo is at this level, with only 15 spaces.
- */
-
- /* find bytes/word */
- if (bits_per_word <= 8)
- bytes_per_word = 1;
- else if (bits_per_word <= 16)
- bytes_per_word = 2;
- else
- bytes_per_word = 4;
-
- /* use struct pxa2xx_spi_chip->dma_burst_size if available */
- if (chip_info)
- req_burst_size = chip_info->dma_burst_size;
- else {
- switch (chip->dma_burst_size) {
- default:
- /* if the default burst size is not set,
- * do it now */
- chip->dma_burst_size = DCMD_BURST8;
- case DCMD_BURST8:
- req_burst_size = 8;
- break;
- case DCMD_BURST16:
- req_burst_size = 16;
- break;
- case DCMD_BURST32:
- req_burst_size = 32;
- break;
- }
- }
- if (req_burst_size <= 8) {
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- } else if (req_burst_size <= 16) {
- if (bytes_per_word == 1) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- retval = 1;
- } else {
- *burst_code = DCMD_BURST16;
- burst_bytes = 16;
- }
- } else {
- if (bytes_per_word == 1) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- retval = 1;
- } else if (bytes_per_word == 2) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST16;
- burst_bytes = 16;
- retval = 1;
- } else {
- *burst_code = DCMD_BURST32;
- burst_bytes = 32;
- }
- }
-
- thresh_words = burst_bytes / bytes_per_word;
-
- /* thresh_words will be between 2 and 8 */
- *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
- | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
-
- return retval;
-}
-
-static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
-{
- unsigned long ssp_clk = clk_get_rate(ssp->clk);
+ rate = min_t(int, ssp_clk, rate);
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
@@ -934,7 +581,6 @@
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
struct chip_data *chip = NULL;
- struct ssp_device *ssp = drv_data->ssp;
void __iomem *reg = drv_data->ioaddr;
u32 clk_div = 0;
u8 bits = 0;
@@ -976,8 +622,8 @@
cs_deassert(drv_data);
}
- /* Check for transfers that need multiple DMA segments */
- if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+ /* Check if we can DMA this transfer */
+ if (!pxa2xx_spi_dma_is_possible(transfer->len) && chip->enable_dma) {
/* reject already-mapped transfers; PIO won't always work */
if (message->is_dma_mapped
@@ -1000,21 +646,20 @@
}
/* Setup the transfer state based on the type of transfer */
- if (flush(drv_data) == 0) {
+ if (pxa2xx_spi_flush(drv_data) == 0) {
dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
message->status = -EIO;
giveback(drv_data);
return;
}
drv_data->n_bytes = chip->n_bytes;
- drv_data->dma_width = chip->dma_width;
drv_data->tx = (void *)transfer->tx_buf;
drv_data->tx_end = drv_data->tx + transfer->len;
drv_data->rx = transfer->rx_buf;
drv_data->rx_end = drv_data->rx + transfer->len;
drv_data->rx_dma = transfer->rx_dma;
drv_data->tx_dma = transfer->tx_dma;
- drv_data->len = transfer->len & DCMD_LENGTH;
+ drv_data->len = transfer->len;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
@@ -1031,25 +676,22 @@
if (transfer->bits_per_word)
bits = transfer->bits_per_word;
- clk_div = ssp_get_clk_div(ssp, speed);
+ clk_div = ssp_get_clk_div(drv_data, speed);
if (bits <= 8) {
drv_data->n_bytes = 1;
- drv_data->dma_width = DCMD_WIDTH1;
drv_data->read = drv_data->read != null_reader ?
u8_reader : null_reader;
drv_data->write = drv_data->write != null_writer ?
u8_writer : null_writer;
} else if (bits <= 16) {
drv_data->n_bytes = 2;
- drv_data->dma_width = DCMD_WIDTH2;
drv_data->read = drv_data->read != null_reader ?
u16_reader : null_reader;
drv_data->write = drv_data->write != null_writer ?
u16_writer : null_writer;
} else if (bits <= 32) {
drv_data->n_bytes = 4;
- drv_data->dma_width = DCMD_WIDTH4;
drv_data->read = drv_data->read != null_reader ?
u32_reader : null_reader;
drv_data->write = drv_data->write != null_writer ?
@@ -1058,7 +700,8 @@
/* if bits/word is changed in dma mode, then must check the
* thresholds and burst also */
if (chip->enable_dma) {
- if (set_dma_burst_and_threshold(chip, message->spi,
+ if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
+ message->spi,
bits, &dma_burst,
&dma_thresh))
if (printk_ratelimit())
@@ -1077,70 +720,21 @@
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful, but
- * only if the length is non-zero and less than MAX_DMA_LEN.
- *
- * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
- * of PIO instead. Care is needed above because the transfer may
- * have have been passed with buffers that are already dma mapped.
- * A zero-length transfer in PIO mode will not try to write/read
- * to/from the buffers
- *
- * REVISIT large transfers are exactly where we most want to be
- * using DMA. If this happens much, split those transfers into
- * multiple DMA segments rather than forcing PIO.
- */
drv_data->dma_mapped = 0;
- if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
- drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (pxa2xx_spi_dma_is_possible(drv_data->len))
+ drv_data->dma_mapped = pxa2xx_spi_map_dma_buffers(drv_data);
if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
- drv_data->transfer_handler = dma_transfer;
+ drv_data->transfer_handler = pxa2xx_spi_dma_transfer;
- /* Setup rx DMA Channel */
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
- DTADR(drv_data->rx_channel) = drv_data->rx_dma;
- if (drv_data->rx == drv_data->null_dma_buf)
- /* No target address increment */
- DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
- | drv_data->dma_width
- | dma_burst
- | drv_data->len;
- else
- DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
- | DCMD_FLOWSRC
- | drv_data->dma_width
- | dma_burst
- | drv_data->len;
-
- /* Setup tx DMA Channel */
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DSADR(drv_data->tx_channel) = drv_data->tx_dma;
- DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
- if (drv_data->tx == drv_data->null_dma_buf)
- /* No source address increment */
- DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
- | drv_data->dma_width
- | dma_burst
- | drv_data->len;
- else
- DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
- | DCMD_FLOWTRG
- | drv_data->dma_width
- | dma_burst
- | drv_data->len;
-
- /* Enable dma end irqs on SSP to detect end of transfer */
- if (drv_data->ssp_type == PXA25x_SSP)
- DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+ pxa2xx_spi_dma_prepare(drv_data, dma_burst);
/* Clear status and start DMA engine */
cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
write_SSSR(drv_data->clear_sr, reg);
- DCSR(drv_data->rx_channel) |= DCSR_RUN;
- DCSR(drv_data->tx_channel) |= DCSR_RUN;
+
+ pxa2xx_spi_dma_start(drv_data);
} else {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = interrupt_transfer;
@@ -1150,6 +744,13 @@
write_SSSR_CS(drv_data, drv_data->clear_sr);
}
+ if (is_lpss_ssp(drv_data)) {
+ if ((read_SSIRF(reg) & 0xff) != chip->lpss_rx_threshold)
+ write_SSIRF(chip->lpss_rx_threshold, reg);
+ if ((read_SSITF(reg) & 0xffff) != chip->lpss_tx_threshold)
+ write_SSITF(chip->lpss_tx_threshold, reg);
+ }
+
/* see if we need to reload the config registers */
if ((read_SSCR0(reg) != cr0)
|| (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
@@ -1176,31 +777,12 @@
write_SSCR1(cr1, reg);
}
-static void pump_messages(struct work_struct *work)
+static int pxa2xx_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
{
- struct driver_data *drv_data =
- container_of(work, struct driver_data, pump_messages);
- unsigned long flags;
+ struct driver_data *drv_data = spi_master_get_devdata(master);
- /* Lock queue and check for queue work */
- spin_lock_irqsave(&drv_data->lock, flags);
- if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
- drv_data->busy = 0;
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Make sure we are not already running a message */
- if (drv_data->cur_msg) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Extract head of queue */
- drv_data->cur_msg = list_entry(drv_data->queue.next,
- struct spi_message, queue);
- list_del_init(&drv_data->cur_msg->queue);
-
+ drv_data->cur_msg = msg;
/* Initial message state*/
drv_data->cur_msg->state = START_STATE;
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
@@ -1213,34 +795,27 @@
/* Mark as busy and launch transfers */
tasklet_schedule(&drv_data->pump_transfers);
-
- drv_data->busy = 1;
- spin_unlock_irqrestore(&drv_data->lock, flags);
+ return 0;
}
-static int transfer(struct spi_device *spi, struct spi_message *msg)
+static int pxa2xx_spi_prepare_transfer(struct spi_master *master)
{
- struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- unsigned long flags;
+ struct driver_data *drv_data = spi_master_get_devdata(master);
- spin_lock_irqsave(&drv_data->lock, flags);
+ pm_runtime_get_sync(&drv_data->pdev->dev);
+ return 0;
+}
- if (drv_data->run == QUEUE_STOPPED) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -ESHUTDOWN;
- }
+static int pxa2xx_spi_unprepare_transfer(struct spi_master *master)
+{
+ struct driver_data *drv_data = spi_master_get_devdata(master);
- msg->actual_length = 0;
- msg->status = -EINPROGRESS;
- msg->state = START_STATE;
+ /* Disable the SSP now */
+ write_SSCR0(read_SSCR0(drv_data->ioaddr) & ~SSCR0_SSE,
+ drv_data->ioaddr);
- list_add_tail(&msg->queue, &drv_data->queue);
-
- if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
+ pm_runtime_mark_last_busy(&drv_data->pdev->dev);
+ pm_runtime_put_autosuspend(&drv_data->pdev->dev);
return 0;
}
@@ -1287,10 +862,18 @@
struct pxa2xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- struct ssp_device *ssp = drv_data->ssp;
unsigned int clk_div;
- uint tx_thres = TX_THRESH_DFLT;
- uint rx_thres = RX_THRESH_DFLT;
+ uint tx_thres, tx_hi_thres, rx_thres;
+
+ if (is_lpss_ssp(drv_data)) {
+ tx_thres = LPSS_TX_LOTHRESH_DFLT;
+ tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
+ rx_thres = LPSS_RX_THRESH_DFLT;
+ } else {
+ tx_thres = TX_THRESH_DFLT;
+ tx_hi_thres = 0;
+ rx_thres = RX_THRESH_DFLT;
+ }
if (!pxa25x_ssp_comp(drv_data)
&& (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
@@ -1330,8 +913,6 @@
chip->gpio_cs = -1;
chip->enable_dma = 0;
chip->timeout = TIMOUT_DFLT;
- chip->dma_burst_size = drv_data->master_info->enable_dma ?
- DCMD_BURST8 : 0;
}
/* protocol drivers may change the chip settings, so...
@@ -1345,23 +926,37 @@
chip->timeout = chip_info->timeout;
if (chip_info->tx_threshold)
tx_thres = chip_info->tx_threshold;
+ if (chip_info->tx_hi_threshold)
+ tx_hi_thres = chip_info->tx_hi_threshold;
if (chip_info->rx_threshold)
rx_thres = chip_info->rx_threshold;
chip->enable_dma = drv_data->master_info->enable_dma;
chip->dma_threshold = 0;
if (chip_info->enable_loopback)
chip->cr1 = SSCR1_LBM;
+ } else if (ACPI_HANDLE(&spi->dev)) {
+ /*
+ * Slave devices enumerated from ACPI namespace don't
+ * usually have chip_info but we still might want to use
+ * DMA with them.
+ */
+ chip->enable_dma = drv_data->master_info->enable_dma;
}
chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
(SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
+ chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres);
+ chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres)
+ | SSITF_TxHiThresh(tx_hi_thres);
+
/* set dma burst and threshold outside of chip_info path so that if
* chip_info goes away after setting chip->enable_dma, the
* burst and threshold can still respond to changes in bits_per_word */
if (chip->enable_dma) {
/* set up legal burst and threshold for dma */
- if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word,
+ if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
+ spi->bits_per_word,
&chip->dma_burst_size,
&chip->dma_threshold)) {
dev_warn(&spi->dev, "in setup: DMA burst size reduced "
@@ -1369,7 +964,7 @@
}
}
- clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
+ clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz);
chip->speed_hz = spi->max_speed_hz;
chip->cr0 = clk_div
@@ -1382,32 +977,32 @@
chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
+ if (spi->mode & SPI_LOOP)
+ chip->cr1 |= SSCR1_LBM;
+
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (!pxa25x_ssp_comp(drv_data))
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk)
+ drv_data->max_clk_rate
/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
chip->enable_dma ? "DMA" : "PIO");
else
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk) / 2
+ drv_data->max_clk_rate / 2
/ (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),
chip->enable_dma ? "DMA" : "PIO");
if (spi->bits_per_word <= 8) {
chip->n_bytes = 1;
- chip->dma_width = DCMD_WIDTH1;
chip->read = u8_reader;
chip->write = u8_writer;
} else if (spi->bits_per_word <= 16) {
chip->n_bytes = 2;
- chip->dma_width = DCMD_WIDTH2;
chip->read = u16_reader;
chip->write = u16_writer;
} else if (spi->bits_per_word <= 32) {
chip->cr0 |= SSCR0_EDSS;
chip->n_bytes = 4;
- chip->dma_width = DCMD_WIDTH4;
chip->read = u32_reader;
chip->write = u32_writer;
} else {
@@ -1438,93 +1033,98 @@
kfree(chip);
}
-static int init_queue(struct driver_data *drv_data)
+#ifdef CONFIG_ACPI
+static int pxa2xx_spi_acpi_add_dma(struct acpi_resource *res, void *data)
{
- INIT_LIST_HEAD(&drv_data->queue);
- spin_lock_init(&drv_data->lock);
+ struct pxa2xx_spi_master *pdata = data;
- drv_data->run = QUEUE_STOPPED;
- drv_data->busy = 0;
+ if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) {
+ const struct acpi_resource_fixed_dma *dma;
- tasklet_init(&drv_data->pump_transfers,
- pump_transfers, (unsigned long)drv_data);
-
- INIT_WORK(&drv_data->pump_messages, pump_messages);
- drv_data->workqueue = create_singlethread_workqueue(
- dev_name(drv_data->master->dev.parent));
- if (drv_data->workqueue == NULL)
- return -EBUSY;
-
- return 0;
-}
-
-static int start_queue(struct driver_data *drv_data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -EBUSY;
+ dma = &res->data.fixed_dma;
+ if (pdata->tx_slave_id < 0) {
+ pdata->tx_slave_id = dma->request_lines;
+ pdata->tx_chan_id = dma->channels;
+ } else if (pdata->rx_slave_id < 0) {
+ pdata->rx_slave_id = dma->request_lines;
+ pdata->rx_chan_id = dma->channels;
+ }
}
- drv_data->run = QUEUE_RUNNING;
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
- return 0;
+ /* Tell the ACPI core to skip this resource */
+ return 1;
}
-static int stop_queue(struct driver_data *drv_data)
+static struct pxa2xx_spi_master *
+pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
{
- unsigned long flags;
- unsigned limit = 500;
- int status = 0;
+ struct pxa2xx_spi_master *pdata;
+ struct list_head resource_list;
+ struct acpi_device *adev;
+ struct ssp_device *ssp;
+ struct resource *res;
+ int devid;
- spin_lock_irqsave(&drv_data->lock, flags);
+ if (!ACPI_HANDLE(&pdev->dev) ||
+ acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
+ return NULL;
- /* This is a bit lame, but is optimized for the common execution path.
- * A wait_queue on the drv_data->busy could be used, but then the common
- * execution path (pump_messages) would be required to call wake_up or
- * friends on every SPI message. Do this instead */
- drv_data->run = QUEUE_STOPPED;
- while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- msleep(10);
- spin_lock_irqsave(&drv_data->lock, flags);
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev,
+ "failed to allocate memory for platform data\n");
+ return NULL;
}
- if (!list_empty(&drv_data->queue) || drv_data->busy)
- status = -EBUSY;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return NULL;
- spin_unlock_irqrestore(&drv_data->lock, flags);
+ ssp = &pdata->ssp;
- return status;
+ ssp->phys_base = res->start;
+ ssp->mmio_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!ssp->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap mmio_base\n");
+ return NULL;
+ }
+
+ ssp->clk = devm_clk_get(&pdev->dev, NULL);
+ ssp->irq = platform_get_irq(pdev, 0);
+ ssp->type = LPSS_SSP;
+ ssp->pdev = pdev;
+
+ ssp->port_id = -1;
+ if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &devid))
+ ssp->port_id = devid;
+
+ pdata->num_chipselect = 1;
+ pdata->rx_slave_id = -1;
+ pdata->tx_slave_id = -1;
+
+ INIT_LIST_HEAD(&resource_list);
+ acpi_dev_get_resources(adev, &resource_list, pxa2xx_spi_acpi_add_dma,
+ pdata);
+ acpi_dev_free_resource_list(&resource_list);
+
+ pdata->enable_dma = pdata->rx_slave_id >= 0 && pdata->tx_slave_id >= 0;
+
+ return pdata;
}
-static int destroy_queue(struct driver_data *drv_data)
+static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
+ { "INT33C0", 0 },
+ { "INT33C1", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
+#else
+static inline struct pxa2xx_spi_master *
+pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
{
- int status;
-
- status = stop_queue(drv_data);
- /* we are unloading the module or failing to load (only two calls
- * to this routine), and neither call can handle a return value.
- * However, destroy_workqueue calls flush_workqueue, and that will
- * block until all work is done. If the reason that stop_queue
- * timed out is that the work will never finish, then it does no
- * good to call destroy_workqueue, so return anyway. */
- if (status != 0)
- return status;
-
- destroy_workqueue(drv_data->workqueue);
-
- return 0;
+ return NULL;
}
+#endif
static int pxa2xx_spi_probe(struct platform_device *pdev)
{
@@ -1535,11 +1135,21 @@
struct ssp_device *ssp;
int status;
- platform_info = dev->platform_data;
+ platform_info = dev_get_platdata(dev);
+ if (!platform_info) {
+ platform_info = pxa2xx_spi_acpi_get_pdata(pdev);
+ if (!platform_info) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+ }
ssp = pxa_ssp_request(pdev->id, pdev->name);
- if (ssp == NULL) {
- dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
+ if (!ssp)
+ ssp = &platform_info->ssp;
+
+ if (!ssp->mmio_base) {
+ dev_err(&pdev->dev, "failed to get ssp\n");
return -ENODEV;
}
@@ -1558,19 +1168,21 @@
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
+ ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev));
/* the spi->mode bits understood by this driver: */
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
- master->bus_num = pdev->id;
+ master->bus_num = ssp->port_id;
master->num_chipselect = platform_info->num_chipselect;
master->dma_alignment = DMA_ALIGNMENT;
master->cleanup = cleanup;
master->setup = setup;
- master->transfer = transfer;
+ master->transfer_one_message = pxa2xx_spi_transfer_one_message;
+ master->prepare_transfer_hardware = pxa2xx_spi_prepare_transfer;
+ master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
drv_data->ssp_type = ssp->type;
- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
- sizeof(struct driver_data)), 8);
+ drv_data->null_dma_buf = (u32 *)PTR_ALIGN(&drv_data[1], DMA_ALIGNMENT);
drv_data->ioaddr = ssp->mmio_base;
drv_data->ssdr_physical = ssp->phys_base + SSDR;
@@ -1581,7 +1193,7 @@
drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
} else {
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
- drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+ drv_data->dma_cr1 = DEFAULT_DMA_CR1;
drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
}
@@ -1597,35 +1209,17 @@
drv_data->tx_channel = -1;
drv_data->rx_channel = -1;
if (platform_info->enable_dma) {
-
- /* Get two DMA channels (rx and tx) */
- drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
- DMA_PRIO_HIGH,
- dma_handler,
- drv_data);
- if (drv_data->rx_channel < 0) {
- dev_err(dev, "problem (%d) requesting rx channel\n",
- drv_data->rx_channel);
- status = -ENODEV;
- goto out_error_irq_alloc;
+ status = pxa2xx_spi_dma_setup(drv_data);
+ if (status) {
+ dev_warn(dev, "failed to setup DMA, using PIO\n");
+ platform_info->enable_dma = false;
}
- drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
- DMA_PRIO_MEDIUM,
- dma_handler,
- drv_data);
- if (drv_data->tx_channel < 0) {
- dev_err(dev, "problem (%d) requesting tx channel\n",
- drv_data->tx_channel);
- status = -ENODEV;
- goto out_error_dma_alloc;
- }
-
- DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
- DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
}
/* Enable SOC clock */
- clk_enable(ssp->clk);
+ clk_prepare_enable(ssp->clk);
+
+ drv_data->max_clk_rate = clk_get_rate(ssp->clk);
/* Load default SSP configuration */
write_SSCR0(0, drv_data->ioaddr);
@@ -1640,41 +1234,29 @@
write_SSTO(0, drv_data->ioaddr);
write_SSPSP(0, drv_data->ioaddr);
- /* Initial and start queue */
- status = init_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "problem initializing queue\n");
- goto out_error_clock_enabled;
- }
- status = start_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue\n");
- goto out_error_clock_enabled;
- }
+ lpss_ssp_setup(drv_data);
+
+ tasklet_init(&drv_data->pump_transfers, pump_transfers,
+ (unsigned long)drv_data);
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
if (status != 0) {
dev_err(&pdev->dev, "problem registering spi master\n");
- goto out_error_queue_alloc;
+ goto out_error_clock_enabled;
}
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
return status;
-out_error_queue_alloc:
- destroy_queue(drv_data);
-
out_error_clock_enabled:
- clk_disable(ssp->clk);
-
-out_error_dma_alloc:
- if (drv_data->tx_channel != -1)
- pxa_free_dma(drv_data->tx_channel);
- if (drv_data->rx_channel != -1)
- pxa_free_dma(drv_data->rx_channel);
-
-out_error_irq_alloc:
+ clk_disable_unprepare(ssp->clk);
+ pxa2xx_spi_dma_release(drv_data);
free_irq(ssp->irq, drv_data);
out_error_master_alloc:
@@ -1687,37 +1269,23 @@
{
struct driver_data *drv_data = platform_get_drvdata(pdev);
struct ssp_device *ssp;
- int status = 0;
if (!drv_data)
return 0;
ssp = drv_data->ssp;
- /* Remove the queue */
- status = destroy_queue(drv_data);
- if (status != 0)
- /* the kernel does not check the return status of this
- * this routine (mod->exit, within the kernel). Therefore
- * nothing is gained by returning from here, the module is
- * going away regardless, and we should not leave any more
- * resources allocated than necessary. We cannot free the
- * message memory in drv_data->queue, but we can release the
- * resources below. I think the kernel should honor -EBUSY
- * returns but... */
- dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
- "complete, message memory not freed\n");
+ pm_runtime_get_sync(&pdev->dev);
/* Disable the SSP at the peripheral and SOC level */
write_SSCR0(0, drv_data->ioaddr);
- clk_disable(ssp->clk);
+ clk_disable_unprepare(ssp->clk);
/* Release DMA */
- if (drv_data->master_info->enable_dma) {
- DRCMR(ssp->drcmr_rx) = 0;
- DRCMR(ssp->drcmr_tx) = 0;
- pxa_free_dma(drv_data->tx_channel);
- pxa_free_dma(drv_data->rx_channel);
- }
+ if (drv_data->master_info->enable_dma)
+ pxa2xx_spi_dma_release(drv_data);
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
/* Release IRQ */
free_irq(ssp->irq, drv_data);
@@ -1749,11 +1317,11 @@
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
- status = stop_queue(drv_data);
+ status = spi_master_suspend(drv_data->master);
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable(ssp->clk);
+ clk_disable_unprepare(ssp->clk);
return 0;
}
@@ -1764,18 +1332,13 @@
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
- if (drv_data->rx_channel != -1)
- DRCMR(drv_data->ssp->drcmr_rx) =
- DRCMR_MAPVLD | drv_data->rx_channel;
- if (drv_data->tx_channel != -1)
- DRCMR(drv_data->ssp->drcmr_tx) =
- DRCMR_MAPVLD | drv_data->tx_channel;
+ pxa2xx_spi_dma_resume(drv_data);
/* Enable the SSP clock */
- clk_enable(ssp->clk);
+ clk_prepare_enable(ssp->clk);
/* Start the queue running */
- status = start_queue(drv_data);
+ status = spi_master_resume(drv_data->master);
if (status != 0) {
dev_err(dev, "problem starting queue (%d)\n", status);
return status;
@@ -1783,20 +1346,38 @@
return 0;
}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int pxa2xx_spi_runtime_suspend(struct device *dev)
+{
+ struct driver_data *drv_data = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(drv_data->ssp->clk);
+ return 0;
+}
+
+static int pxa2xx_spi_runtime_resume(struct device *dev)
+{
+ struct driver_data *drv_data = dev_get_drvdata(dev);
+
+ clk_prepare_enable(drv_data->ssp->clk);
+ return 0;
+}
+#endif
static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
- .suspend = pxa2xx_spi_suspend,
- .resume = pxa2xx_spi_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
+ SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend,
+ pxa2xx_spi_runtime_resume, NULL)
};
-#endif
static struct platform_driver driver = {
.driver = {
.name = "pxa2xx-spi",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &pxa2xx_spi_pm_ops,
-#endif
+ .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
},
.probe = pxa2xx_spi_probe,
.remove = pxa2xx_spi_remove,
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
new file mode 100644
index 0000000..5adc2a1
--- /dev/null
+++ b/drivers/spi/spi-pxa2xx.h
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ * Copyright (C) 2013, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SPI_PXA2XX_H
+#define SPI_PXA2XX_H
+
+#include <linux/atomic.h>
+#include <linux/dmaengine.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/scatterlist.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+struct driver_data {
+ /* Driver model hookup */
+ struct platform_device *pdev;
+
+ /* SSP Info */
+ struct ssp_device *ssp;
+
+ /* SPI framework hookup */
+ enum pxa_ssp_type ssp_type;
+ struct spi_master *master;
+
+ /* PXA hookup */
+ struct pxa2xx_spi_master *master_info;
+
+ /* PXA private DMA setup stuff */
+ int rx_channel;
+ int tx_channel;
+ u32 *null_dma_buf;
+
+ /* SSP register addresses */
+ void __iomem *ioaddr;
+ u32 ssdr_physical;
+
+ /* SSP masks*/
+ u32 dma_cr1;
+ u32 int_cr1;
+ u32 clear_sr;
+ u32 mask_sr;
+
+ /* Maximun clock rate */
+ unsigned long max_clk_rate;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* DMA engine support */
+ struct dma_chan *rx_chan;
+ struct dma_chan *tx_chan;
+ struct sg_table rx_sgt;
+ struct sg_table tx_sgt;
+ int rx_nents;
+ int tx_nents;
+ void *dummy;
+ atomic_t dma_running;
+
+ /* Current message transfer state info */
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ int dma_mapped;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ size_t rx_map_len;
+ size_t tx_map_len;
+ u8 n_bytes;
+ int (*write)(struct driver_data *drv_data);
+ int (*read)(struct driver_data *drv_data);
+ irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+ void (*cs_control)(u32 command);
+
+ void __iomem *lpss_base;
+};
+
+struct chip_data {
+ u32 cr0;
+ u32 cr1;
+ u32 psp;
+ u32 timeout;
+ u8 n_bytes;
+ u32 dma_burst_size;
+ u32 threshold;
+ u32 dma_threshold;
+ u16 lpss_rx_threshold;
+ u16 lpss_tx_threshold;
+ u8 enable_dma;
+ u8 bits_per_word;
+ u32 speed_hz;
+ union {
+ int gpio_cs;
+ unsigned int frm;
+ };
+ int gpio_cs_inverted;
+ int (*write)(struct driver_data *drv_data);
+ int (*read)(struct driver_data *drv_data);
+ void (*cs_control)(u32 command);
+};
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void const __iomem *p) \
+{ return __raw_readl(p + (off)); } \
+\
+static inline void write_##reg(u32 v, void __iomem *p) \
+{ __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+DEFINE_SSP_REG(SSITF, SSITF)
+DEFINE_SSP_REG(SSIRF, SSIRF)
+
+#define START_STATE ((void *)0)
+#define RUNNING_STATE ((void *)1)
+#define DONE_STATE ((void *)2)
+#define ERROR_STATE ((void *)-1)
+
+#define IS_DMA_ALIGNED(x) IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT)
+#define DMA_ALIGNMENT 8
+
+static inline int pxa25x_ssp_comp(struct driver_data *drv_data)
+{
+ if (drv_data->ssp_type == PXA25x_SSP)
+ return 1;
+ if (drv_data->ssp_type == CE4100_SSP)
+ return 1;
+ return 0;
+}
+
+static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
+{
+ void __iomem *reg = drv_data->ioaddr;
+
+ if (drv_data->ssp_type == CE4100_SSP)
+ val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
+
+ write_SSSR(val, reg);
+}
+
+extern int pxa2xx_spi_flush(struct driver_data *drv_data);
+extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
+
+/*
+ * Select the right DMA implementation.
+ */
+#if defined(CONFIG_SPI_PXA2XX_PXADMA)
+#define SPI_PXA2XX_USE_DMA 1
+#define MAX_DMA_LEN 8191
+#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
+#elif defined(CONFIG_SPI_PXA2XX_DMA)
+#define SPI_PXA2XX_USE_DMA 1
+#define MAX_DMA_LEN SZ_64K
+#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
+#else
+#undef SPI_PXA2XX_USE_DMA
+#define MAX_DMA_LEN 0
+#define DEFAULT_DMA_CR1 0
+#endif
+
+#ifdef SPI_PXA2XX_USE_DMA
+extern bool pxa2xx_spi_dma_is_possible(size_t len);
+extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data);
+extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
+extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst);
+extern void pxa2xx_spi_dma_start(struct driver_data *drv_data);
+extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data);
+extern void pxa2xx_spi_dma_release(struct driver_data *drv_data);
+extern void pxa2xx_spi_dma_resume(struct driver_data *drv_data);
+extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+ struct spi_device *spi,
+ u8 bits_per_word,
+ u32 *burst_code,
+ u32 *threshold);
+#else
+static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; }
+static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+ return 0;
+}
+#define pxa2xx_spi_dma_transfer NULL
+static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
+ u32 dma_burst) {}
+static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {}
+static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+ return 0;
+}
+static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {}
+static inline void pxa2xx_spi_dma_resume(struct driver_data *drv_data) {}
+static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+ struct spi_device *spi,
+ u8 bits_per_word,
+ u32 *burst_code,
+ u32 *threshold)
+{
+ return -ENODEV;
+}
+#endif
+
+#endif /* SPI_PXA2XX_H */
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index ad93231..8f492ed 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -62,7 +62,7 @@
#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9)
#define S3C64XX_SPI_CLKSEL_SRCSHFT 9
#define S3C64XX_SPI_ENCLK_ENABLE (1<<8)
-#define S3C64XX_SPI_PSR_MASK 0xff
+#define S3C64XX_SPI_PSR_MASK 0xff
#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29)
#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29)
@@ -697,7 +697,7 @@
INIT_COMPLETION(sdd->xfer_completion);
/* Only BPW and Speed may change across transfers */
- bpw = xfer->bits_per_word ? : spi->bits_per_word;
+ bpw = xfer->bits_per_word;
speed = xfer->speed_hz ? : spi->max_speed_hz;
if (xfer->len % (bpw / 8)) {
@@ -743,8 +743,7 @@
sdd->regs + S3C64XX_SPI_SLAVE_SEL);
if (status) {
- dev_err(&spi->dev, "I/O Error: "
- "rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+ dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
(sdd->state & RXBUSY) ? 'f' : 'p',
(sdd->state & TXBUSY) ? 'f' : 'p',
@@ -799,7 +798,7 @@
/* Acquire DMA channels */
while (!acquire_dma(sdd))
- msleep(10);
+ usleep_range(10000, 11000);
pm_runtime_get_sync(&sdd->pdev->dev);
@@ -841,16 +840,14 @@
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs) {
- dev_err(&spi->dev, "could not allocate memory for controller"
- " data\n");
+ dev_err(&spi->dev, "could not allocate memory for controller data\n");
of_node_put(data_np);
return ERR_PTR(-ENOMEM);
}
cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
if (!gpio_is_valid(cs->line)) {
- dev_err(&spi->dev, "chip select gpio is not specified or "
- "invalid\n");
+ dev_err(&spi->dev, "chip select gpio is not specified or invalid\n");
kfree(cs);
of_node_put(data_np);
return ERR_PTR(-EINVAL);
@@ -957,6 +954,8 @@
if (spi->max_speed_hz >= speed) {
spi->max_speed_hz = speed;
} else {
+ dev_err(&spi->dev, "Can't set %dHz transfer speed\n",
+ spi->max_speed_hz);
err = -EINVAL;
goto setup_exit;
}
@@ -1076,8 +1075,8 @@
if (!sdd->pdev->dev.of_node) {
res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1);
if (!res) {
- dev_err(&pdev->dev, "Unable to get SPI-%s dma "
- "resource\n", chan_str);
+ dev_err(&pdev->dev, "Unable to get SPI-%s dma resource\n",
+ chan_str);
return -ENXIO;
}
dma_data->dmach = res->start;
@@ -1133,8 +1132,7 @@
gpio_free(sdd->gpios[idx]);
}
-static struct s3c64xx_spi_info * s3c64xx_spi_parse_dt(
- struct device *dev)
+static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
{
struct s3c64xx_spi_info *sci;
u32 temp;
@@ -1146,16 +1144,14 @@
}
if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
- dev_warn(dev, "spi bus clock parent not specified, using "
- "clock at index 0 as parent\n");
+ dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n");
sci->src_clk_nr = 0;
} else {
sci->src_clk_nr = temp;
}
if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
- dev_warn(dev, "number of chip select lines not specified, "
- "assuming 1 chip select line\n");
+ dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n");
sci->num_cs = 1;
} else {
sci->num_cs = temp;
@@ -1195,7 +1191,7 @@
platform_get_device_id(pdev)->driver_data;
}
-static int __init s3c64xx_spi_probe(struct platform_device *pdev)
+static int s3c64xx_spi_probe(struct platform_device *pdev)
{
struct resource *mem_res;
struct s3c64xx_spi_driver_data *sdd;
@@ -1245,8 +1241,8 @@
if (pdev->dev.of_node) {
ret = of_alias_get_id(pdev->dev.of_node, "spi");
if (ret < 0) {
- dev_err(&pdev->dev, "failed to get alias id, "
- "errno %d\n", ret);
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
+ ret);
goto err0;
}
sdd->port_id = ret;
@@ -1280,7 +1276,7 @@
if (sdd->regs == NULL) {
dev_err(&pdev->dev, "Unable to remap IO\n");
ret = -ENXIO;
- goto err1;
+ goto err0;
}
if (!sci->cfg_gpio && pdev->dev.of_node) {
@@ -1289,36 +1285,36 @@
} else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
dev_err(&pdev->dev, "Unable to config gpio\n");
ret = -EBUSY;
- goto err2;
+ goto err0;
}
/* Setup clocks */
- sdd->clk = clk_get(&pdev->dev, "spi");
+ sdd->clk = devm_clk_get(&pdev->dev, "spi");
if (IS_ERR(sdd->clk)) {
dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
ret = PTR_ERR(sdd->clk);
- goto err3;
+ goto err1;
}
if (clk_prepare_enable(sdd->clk)) {
dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
ret = -EBUSY;
- goto err4;
+ goto err1;
}
sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
- sdd->src_clk = clk_get(&pdev->dev, clk_name);
+ sdd->src_clk = devm_clk_get(&pdev->dev, clk_name);
if (IS_ERR(sdd->src_clk)) {
dev_err(&pdev->dev,
"Unable to acquire clock '%s'\n", clk_name);
ret = PTR_ERR(sdd->src_clk);
- goto err5;
+ goto err2;
}
if (clk_prepare_enable(sdd->src_clk)) {
dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
ret = -EBUSY;
- goto err6;
+ goto err2;
}
/* Setup Deufult Mode */
@@ -1328,11 +1324,12 @@
init_completion(&sdd->xfer_completion);
INIT_LIST_HEAD(&sdd->queue);
- ret = request_irq(irq, s3c64xx_spi_irq, 0, "spi-s3c64xx", sdd);
+ ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0,
+ "spi-s3c64xx", sdd);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
irq, ret);
- goto err7;
+ goto err3;
}
writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
@@ -1342,11 +1339,10 @@
if (spi_register_master(master)) {
dev_err(&pdev->dev, "cannot register SPI master\n");
ret = -EBUSY;
- goto err8;
+ goto err3;
}
- dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
- "with %d Slaves attached\n",
+ dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
sdd->port_id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
@@ -1356,21 +1352,13 @@
return 0;
-err8:
- free_irq(irq, sdd);
-err7:
- clk_disable_unprepare(sdd->src_clk);
-err6:
- clk_put(sdd->src_clk);
-err5:
- clk_disable_unprepare(sdd->clk);
-err4:
- clk_put(sdd->clk);
err3:
+ clk_disable_unprepare(sdd->src_clk);
+err2:
+ clk_disable_unprepare(sdd->clk);
+err1:
if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
s3c64xx_spi_dt_gpio_free(sdd);
-err2:
-err1:
err0:
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1389,13 +1377,9 @@
writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
- free_irq(platform_get_irq(pdev, 0), sdd);
-
clk_disable_unprepare(sdd->src_clk);
- clk_put(sdd->src_clk);
clk_disable_unprepare(sdd->clk);
- clk_put(sdd->clk);
if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
s3c64xx_spi_dt_gpio_free(sdd);
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 96358d0..8b40d08 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
@@ -592,6 +593,37 @@
return 0;
}
+#ifdef CONFIG_OF
+static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
+{
+ struct sh_msiof_spi_info *info;
+ struct device_node *np = dev->of_node;
+ u32 num_cs = 0;
+
+ info = devm_kzalloc(dev, sizeof(struct sh_msiof_spi_info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev, "failed to allocate setup data\n");
+ return NULL;
+ }
+
+ /* Parse the MSIOF properties */
+ of_property_read_u32(np, "num-cs", &num_cs);
+ of_property_read_u32(np, "renesas,tx-fifo-size",
+ &info->tx_fifo_override);
+ of_property_read_u32(np, "renesas,rx-fifo-size",
+ &info->rx_fifo_override);
+
+ info->num_chipselect = num_cs;
+
+ return info;
+}
+#else
+static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int sh_msiof_spi_probe(struct platform_device *pdev)
{
struct resource *r;
@@ -610,7 +642,17 @@
p = spi_master_get_devdata(master);
platform_set_drvdata(pdev, p);
- p->info = pdev->dev.platform_data;
+ if (pdev->dev.of_node)
+ p->info = sh_msiof_spi_parse_dt(&pdev->dev);
+ else
+ p->info = pdev->dev.platform_data;
+
+ if (!p->info) {
+ dev_err(&pdev->dev, "failed to obtain device info\n");
+ ret = -ENXIO;
+ goto err1;
+ }
+
init_completion(&p->done);
p->clk = clk_get(&pdev->dev, NULL);
@@ -715,6 +757,17 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id sh_msiof_match[] = {
+ { .compatible = "renesas,sh-msiof", },
+ { .compatible = "renesas,sh-mobile-msiof", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sh_msiof_match);
+#else
+#define sh_msiof_match NULL
+#endif
+
static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = {
.runtime_suspend = sh_msiof_spi_runtime_nop,
.runtime_resume = sh_msiof_spi_runtime_nop,
@@ -727,6 +780,7 @@
.name = "spi_sh_msiof",
.owner = THIS_MODULE,
.pm = &sh_msiof_spi_dev_pm_ops,
+ .of_match_table = sh_msiof_match,
},
};
module_platform_driver(sh_msiof_spi_drv);
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index e0f43a5..6a5626d 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -382,8 +382,7 @@
sspi = spi_master_get_devdata(spi->master);
- bits_per_word = t && t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word;
+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz;
/* Enable IO mode for RX, TX */
@@ -570,7 +569,7 @@
ret = -EINVAL;
goto free_pin;
}
- clk_enable(sspi->clk);
+ clk_prepare_enable(sspi->clk);
sspi->ctrl_freq = clk_get_rate(sspi->clk);
init_completion(&sspi->done);
@@ -594,7 +593,7 @@
return 0;
free_clk:
- clk_disable(sspi->clk);
+ clk_disable_unprepare(sspi->clk);
clk_put(sspi->clk);
free_pin:
pinctrl_put(sspi->p);
@@ -618,7 +617,7 @@
if (sspi->chipselect[i] > 0)
gpio_free(sspi->chipselect[i]);
}
- clk_disable(sspi->clk);
+ clk_disable_unprepare(sspi->clk);
clk_put(sspi->clk);
pinctrl_put(sspi->p);
spi_master_put(master);
@@ -659,6 +658,7 @@
static const struct of_device_id spi_sirfsoc_of_match[] = {
{ .compatible = "sirf,prima2-spi", },
+ { .compatible = "sirf,marco-spi", },
{}
};
MODULE_DEVICE_TABLE(of, sirfsoc_spi_of_match);
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 448a8cc..9a42c15 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -269,9 +269,7 @@
u32 speed;
unsigned long command;
- speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
- if (!speed)
- speed = tsd->spi_max_frequency;
+ speed = t->speed_hz;
if (speed != tsd->cur_speed) {
clk_set_rate(tsd->clk, speed);
tsd->cur_speed = speed;
@@ -319,6 +317,15 @@
return tegra_sflash_start_cpu_based_transfer(tsd, t);
}
+static int tegra_sflash_setup(struct spi_device *spi)
+{
+ struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master);
+
+ /* Set speed to the spi max fequency if spi device has not set */
+ spi->max_speed_hz = spi->max_speed_hz ? : tsd->spi_max_frequency;
+ return 0;
+}
+
static int tegra_sflash_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -492,6 +499,7 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->setup = tegra_sflash_setup;
master->transfer_one_message = tegra_sflash_transfer_one_message;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 651167f..8d51db8 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -284,8 +284,7 @@
unsigned max_len;
unsigned total_fifo_words;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
tspi->bytes_per_word = (bits_per_word - 1) / 8 + 1;
if (bits_per_word == 8 || bits_per_word == 16) {
@@ -378,8 +377,7 @@
} else {
unsigned int bits_per_word;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- tspi->cur_spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
for (count = 0; count < rx_full_count; count++) {
x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
for (i = 0; (i < tspi->bytes_per_word); i++)
@@ -444,8 +442,7 @@
unsigned int x;
unsigned int rx_mask, bits_per_word;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- tspi->cur_spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
rx_mask = (1 << bits_per_word) - 1;
for (count = 0; count < tspi->curr_dma_words; count++) {
x = tspi->rx_dma_buf[count];
@@ -728,9 +725,7 @@
unsigned long command2;
bits_per_word = t->bits_per_word;
- speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
- if (!speed)
- speed = tspi->spi_max_frequency;
+ speed = t->speed_hz;
if (speed != tspi->cur_speed) {
clk_set_rate(tspi->clk, speed * 4);
tspi->cur_speed = speed;
@@ -841,6 +836,8 @@
BUG_ON(spi->chip_select >= MAX_CHIP_SELECT);
+ /* Set speed to the spi max fequency if spi device has not set */
+ spi->max_speed_hz = spi->max_speed_hz ? : tspi->spi_max_frequency;
ret = pm_runtime_get_sync(tspi->dev);
if (ret < 0) {
dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index d5a3cbb..adb8530 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -189,9 +189,8 @@
unsigned int len = t->len;
unsigned int wsize;
u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
- u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+ u8 bits_per_word = t->bits_per_word;
- bits_per_word = bits_per_word ? : 8;
wsize = bits_per_word >> 3; /* in bytes */
if (prev_speed_hz != speed_hz
@@ -316,9 +315,8 @@
/* check each transfer's parameters */
list_for_each_entry (t, &m->transfers, transfer_list) {
u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
- u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+ u8 bits_per_word = t->bits_per_word;
- bits_per_word = bits_per_word ? : 8;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
if (bits_per_word != 8 && bits_per_word != 16)
@@ -337,7 +335,7 @@
return 0;
}
-static int __init txx9spi_probe(struct platform_device *dev)
+static int txx9spi_probe(struct platform_device *dev)
{
struct spi_master *master;
struct txx9spi *c;
@@ -432,7 +430,7 @@
return ret;
}
-static int __exit txx9spi_remove(struct platform_device *dev)
+static int txx9spi_remove(struct platform_device *dev)
{
struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
struct txx9spi *c = spi_master_get_devdata(master);
@@ -450,7 +448,7 @@
MODULE_ALIAS("platform:spi_txx9");
static struct platform_driver txx9spi_driver = {
- .remove = __exit_p(txx9spi_remove),
+ .remove = txx9spi_remove,
.driver = {
.name = "spi_txx9",
.owner = THIS_MODULE,
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 19ee901..6f193b0 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -33,7 +33,7 @@
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/export.h>
-#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/ioport.h>
@@ -1059,15 +1059,14 @@
#ifdef CONFIG_OF
static int of_spi_register_master(struct spi_master *master)
{
- u16 nb;
- int i, *cs;
+ int nb, i, *cs;
struct device_node *np = master->dev.of_node;
if (!np)
return 0;
nb = of_gpio_named_count(np, "cs-gpios");
- master->num_chipselect = max(nb, master->num_chipselect);
+ master->num_chipselect = max(nb, (int)master->num_chipselect);
if (nb < 1)
return 0;
@@ -1080,7 +1079,8 @@
if (!master->cs_gpios)
return -ENOMEM;
- memset(cs, -EINVAL, master->num_chipselect);
+ for (i = 0; i < master->num_chipselect; i++)
+ cs[i] = -EINVAL;
for (i = 0; i < nb; i++)
cs[i] = of_get_named_gpio(np, "cs-gpios", i);
@@ -1135,6 +1135,9 @@
if (master->num_chipselect == 0)
return -EINVAL;
+ if ((master->bus_num < 0) && master->dev.of_node)
+ master->bus_num = of_alias_get_id(master->dev.of_node, "spi");
+
/* convention: dynamically assigned bus IDs count down from the max */
if (master->bus_num < 0) {
/* FIXME switch to an IDR based scheme, something like
@@ -1366,12 +1369,14 @@
}
/**
- * Set transfer bits_per_word as spi device default if it is not
- * set for this transfer.
+ * Set transfer bits_per_word and max speed as spi device default if
+ * it is not set for this transfer.
*/
list_for_each_entry(xfer, &message->transfers, transfer_list) {
if (!xfer->bits_per_word)
xfer->bits_per_word = spi->bits_per_word;
+ if (!xfer->speed_hz)
+ xfer->speed_hz = spi->max_speed_hz;
}
message->spi = spi;
@@ -1656,7 +1661,8 @@
* using the pre-allocated buffer or the transfer is too large.
*/
if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
- local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), GFP_KERNEL);
+ local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
+ GFP_KERNEL | GFP_DMA);
if (!local_buf)
return -ENOMEM;
} else {
diff --git a/drivers/staging/csr/bh.c b/drivers/staging/csr/bh.c
index 1a1f5c7..7b13359 100644
--- a/drivers/staging/csr/bh.c
+++ b/drivers/staging/csr/bh.c
@@ -15,7 +15,7 @@
*/
#include "csr_wifi_hip_unifi.h"
#include "unifi_priv.h"
-
+#include <linux/sched/rt.h>
/*
* ---------------------------------------------------------------------------
diff --git a/drivers/staging/csr/unifi_sme.c b/drivers/staging/csr/unifi_sme.c
index 7c6c413..49395da 100644
--- a/drivers/staging/csr/unifi_sme.c
+++ b/drivers/staging/csr/unifi_sme.c
@@ -15,7 +15,7 @@
#include "unifi_priv.h"
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_conversions.h"
-
+#include <linux/sched/rt.h>
diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig
index 7d32075..d44d3ad 100644
--- a/drivers/staging/iio/trigger/Kconfig
+++ b/drivers/staging/iio/trigger/Kconfig
@@ -21,7 +21,6 @@
config IIO_SYSFS_TRIGGER
tristate "SYSFS trigger"
depends on SYSFS
- depends on HAVE_IRQ_WORK
select IRQ_WORK
help
Provides support for using SYSFS entry as IIO triggers.
diff --git a/drivers/staging/omapdrm/Kconfig b/drivers/staging/omapdrm/Kconfig
index b724a41..09f65dc 100644
--- a/drivers/staging/omapdrm/Kconfig
+++ b/drivers/staging/omapdrm/Kconfig
@@ -3,8 +3,8 @@
tristate "OMAP DRM"
depends on DRM && !CONFIG_FB_OMAP2
depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM
+ depends on OMAP2_DSS
select DRM_KMS_HELPER
- select OMAP2_DSS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index cac3207..adb8da5 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -296,7 +296,7 @@
return ret;
}
-static int quickstart_acpi_remove(struct acpi_device *device, int type)
+static int quickstart_acpi_remove(struct acpi_device *device)
{
acpi_status status;
struct quickstart_acpi *quickstart;
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 7ce3197..dd6277e 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -179,8 +179,7 @@
static void max3100_dowork(struct max3100_port *s)
{
- if (!s->force_end_work && !work_pending(&s->work) &&
- !freezing(current) && !s->suspending)
+ if (!s->force_end_work && !freezing(current) && !s->suspending)
queue_work(s->workqueue, &s->work);
}
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index b3c4a25..814655e 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -15,6 +15,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/fs.h>
@@ -41,6 +42,7 @@
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/uaccess.h>
+#include <linux/moduleparam.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
@@ -577,8 +579,71 @@
bool active;
bool need_reinject;
bool reinjecting;
+
+ /* reset sequence handling */
+ bool reset_canceled;
+ unsigned long reset_keybit[BITS_TO_LONGS(KEY_CNT)];
+ int reset_seq_len;
+ int reset_seq_cnt;
+ int reset_seq_version;
};
+#define SYSRQ_KEY_RESET_MAX 20 /* Should be plenty */
+static unsigned short sysrq_reset_seq[SYSRQ_KEY_RESET_MAX];
+static unsigned int sysrq_reset_seq_len;
+static unsigned int sysrq_reset_seq_version = 1;
+
+static void sysrq_parse_reset_sequence(struct sysrq_state *state)
+{
+ int i;
+ unsigned short key;
+
+ state->reset_seq_cnt = 0;
+
+ for (i = 0; i < sysrq_reset_seq_len; i++) {
+ key = sysrq_reset_seq[i];
+
+ if (key == KEY_RESERVED || key > KEY_MAX)
+ break;
+
+ __set_bit(key, state->reset_keybit);
+ state->reset_seq_len++;
+
+ if (test_bit(key, state->key_down))
+ state->reset_seq_cnt++;
+ }
+
+ /* Disable reset until old keys are not released */
+ state->reset_canceled = state->reset_seq_cnt != 0;
+
+ state->reset_seq_version = sysrq_reset_seq_version;
+}
+
+static bool sysrq_detect_reset_sequence(struct sysrq_state *state,
+ unsigned int code, int value)
+{
+ if (!test_bit(code, state->reset_keybit)) {
+ /*
+ * Pressing any key _not_ in reset sequence cancels
+ * the reset sequence.
+ */
+ if (value && state->reset_seq_cnt)
+ state->reset_canceled = true;
+ } else if (value == 0) {
+ /* key release */
+ if (--state->reset_seq_cnt == 0)
+ state->reset_canceled = false;
+ } else if (value == 1) {
+ /* key press, not autorepeat */
+ if (++state->reset_seq_cnt == state->reset_seq_len &&
+ !state->reset_canceled) {
+ return true;
+ }
+ }
+
+ return false;
+}
+
static void sysrq_reinject_alt_sysrq(struct work_struct *work)
{
struct sysrq_state *sysrq =
@@ -605,11 +670,104 @@
}
}
+static bool sysrq_handle_keypress(struct sysrq_state *sysrq,
+ unsigned int code, int value)
+{
+ bool was_active = sysrq->active;
+ bool suppress;
+
+ switch (code) {
+
+ case KEY_LEFTALT:
+ case KEY_RIGHTALT:
+ if (!value) {
+ /* One of ALTs is being released */
+ if (sysrq->active && code == sysrq->alt_use)
+ sysrq->active = false;
+
+ sysrq->alt = KEY_RESERVED;
+
+ } else if (value != 2) {
+ sysrq->alt = code;
+ sysrq->need_reinject = false;
+ }
+ break;
+
+ case KEY_SYSRQ:
+ if (value == 1 && sysrq->alt != KEY_RESERVED) {
+ sysrq->active = true;
+ sysrq->alt_use = sysrq->alt;
+ /*
+ * If nothing else will be pressed we'll need
+ * to re-inject Alt-SysRq keysroke.
+ */
+ sysrq->need_reinject = true;
+ }
+
+ /*
+ * Pretend that sysrq was never pressed at all. This
+ * is needed to properly handle KGDB which will try
+ * to release all keys after exiting debugger. If we
+ * do not clear key bit it KGDB will end up sending
+ * release events for Alt and SysRq, potentially
+ * triggering print screen function.
+ */
+ if (sysrq->active)
+ clear_bit(KEY_SYSRQ, sysrq->handle.dev->key);
+
+ break;
+
+ default:
+ if (sysrq->active && value && value != 2) {
+ sysrq->need_reinject = false;
+ __handle_sysrq(sysrq_xlate[code], true);
+ }
+ break;
+ }
+
+ suppress = sysrq->active;
+
+ if (!sysrq->active) {
+
+ /*
+ * See if reset sequence has changed since the last time.
+ */
+ if (sysrq->reset_seq_version != sysrq_reset_seq_version)
+ sysrq_parse_reset_sequence(sysrq);
+
+ /*
+ * If we are not suppressing key presses keep track of
+ * keyboard state so we can release keys that have been
+ * pressed before entering SysRq mode.
+ */
+ if (value)
+ set_bit(code, sysrq->key_down);
+ else
+ clear_bit(code, sysrq->key_down);
+
+ if (was_active)
+ schedule_work(&sysrq->reinject_work);
+
+ if (sysrq_detect_reset_sequence(sysrq, code, value)) {
+ /* Force emergency reboot */
+ __handle_sysrq(sysrq_xlate[KEY_B], false);
+ }
+
+ } else if (value == 0 && test_and_clear_bit(code, sysrq->key_down)) {
+ /*
+ * Pass on release events for keys that was pressed before
+ * entering SysRq mode.
+ */
+ suppress = false;
+ }
+
+ return suppress;
+}
+
static bool sysrq_filter(struct input_handle *handle,
unsigned int type, unsigned int code, int value)
{
struct sysrq_state *sysrq = handle->private;
- bool was_active = sysrq->active;
bool suppress;
/*
@@ -626,79 +784,7 @@
break;
case EV_KEY:
- switch (code) {
-
- case KEY_LEFTALT:
- case KEY_RIGHTALT:
- if (!value) {
- /* One of ALTs is being released */
- if (sysrq->active && code == sysrq->alt_use)
- sysrq->active = false;
-
- sysrq->alt = KEY_RESERVED;
-
- } else if (value != 2) {
- sysrq->alt = code;
- sysrq->need_reinject = false;
- }
- break;
-
- case KEY_SYSRQ:
- if (value == 1 && sysrq->alt != KEY_RESERVED) {
- sysrq->active = true;
- sysrq->alt_use = sysrq->alt;
- /*
- * If nothing else will be pressed we'll need
- * to re-inject Alt-SysRq keysroke.
- */
- sysrq->need_reinject = true;
- }
-
- /*
- * Pretend that sysrq was never pressed at all. This
- * is needed to properly handle KGDB which will try
- * to release all keys after exiting debugger. If we
- * do not clear key bit it KGDB will end up sending
- * release events for Alt and SysRq, potentially
- * triggering print screen function.
- */
- if (sysrq->active)
- clear_bit(KEY_SYSRQ, handle->dev->key);
-
- break;
-
- default:
- if (sysrq->active && value && value != 2) {
- sysrq->need_reinject = false;
- __handle_sysrq(sysrq_xlate[code], true);
- }
- break;
- }
-
- suppress = sysrq->active;
-
- if (!sysrq->active) {
- /*
- * If we are not suppressing key presses keep track of
- * keyboard state so we can release keys that have been
- * pressed before entering SysRq mode.
- */
- if (value)
- set_bit(code, sysrq->key_down);
- else
- clear_bit(code, sysrq->key_down);
-
- if (was_active)
- schedule_work(&sysrq->reinject_work);
-
- } else if (value == 0 &&
- test_and_clear_bit(code, sysrq->key_down)) {
- /*
- * Pass on release events for keys that was pressed before
- * entering SysRq mode.
- */
- suppress = false;
- }
+ suppress = sysrq_handle_keypress(sysrq, code, value);
break;
default:
@@ -786,7 +872,20 @@
static inline void sysrq_register_handler(void)
{
+ extern unsigned short platform_sysrq_reset_seq[] __weak;
+ unsigned short key;
int error;
+ int i;
+
+ if (platform_sysrq_reset_seq) {
+ for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
+ key = platform_sysrq_reset_seq[i];
+ if (key == KEY_RESERVED || key > KEY_MAX)
+ break;
+
+ sysrq_reset_seq[sysrq_reset_seq_len++] = key;
+ }
+ }
error = input_register_handler(&sysrq_handler);
if (error)
@@ -803,6 +902,36 @@
}
}
+static int sysrq_reset_seq_param_set(const char *buffer,
+ const struct kernel_param *kp)
+{
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buffer, 0, &val);
+ if (error < 0)
+ return error;
+
+ if (val > KEY_MAX)
+ return -EINVAL;
+
+ *((unsigned short *)kp->arg) = val;
+ sysrq_reset_seq_version++;
+
+ return 0;
+}
+
+static struct kernel_param_ops param_ops_sysrq_reset_seq = {
+ .get = param_get_ushort,
+ .set = sysrq_reset_seq_param_set,
+};
+
+#define param_check_sysrq_reset_seq(name, p) \
+ __param_check(name, p, unsigned short)
+
+module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq,
+ &sysrq_reset_seq_len, 0644);
+
#else
static inline void sysrq_register_handler(void)
diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c
index f088d4c..d843296 100644
--- a/drivers/video/backlight/apple_bl.c
+++ b/drivers/video/backlight/apple_bl.c
@@ -196,7 +196,7 @@
return 0;
}
-static int apple_bl_remove(struct acpi_device *dev, int type)
+static int apple_bl_remove(struct acpi_device *dev)
{
backlight_device_unregister(apple_backlight_device);
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 4ef18e2..2d0d144 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -1121,8 +1121,7 @@
disable_irq(dp->irq);
- if (work_pending(&dp->hotplug_work))
- flush_work(&dp->hotplug_work);
+ flush_work(&dp->hotplug_work);
if (pdev->dev.of_node) {
if (dp->phy_addr)
@@ -1144,8 +1143,7 @@
struct exynos_dp_platdata *pdata = dev->platform_data;
struct exynos_dp_device *dp = dev_get_drvdata(dev);
- if (work_pending(&dp->hotplug_work))
- flush_work(&dp->hotplug_work);
+ flush_work(&dp->hotplug_work);
if (dev->of_node) {
if (dp->phy_addr)
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 18688c1..d7d66ef 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -538,6 +538,7 @@
FEAT_ALPHA_FIXED_ZORDER,
FEAT_FIFO_MERGE,
FEAT_OMAP3_DSI_FIFO_BUG,
+ FEAT_DPI_USES_VDDS_DSI,
};
static const enum dss_feat_id omap4430_es1_0_dss_feat_list[] = {
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 74d77df..22f77c5 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -1787,7 +1787,7 @@
int rc;
uint64_t callback_via;
if (xen_have_vector_callback) {
- callback_via = HVM_CALLBACK_VECTOR(XEN_HVM_EVTCHN_CALLBACK);
+ callback_via = HVM_CALLBACK_VECTOR(HYPERVISOR_CALLBACK_VECTOR);
rc = xen_set_callback_via(callback_via);
if (rc) {
printk(KERN_ERR "Request for Xen HVM callback vector"
@@ -1798,8 +1798,9 @@
printk(KERN_INFO "Xen HVM callback vector for event delivery is "
"enabled\n");
/* in the restore case the vector has already been allocated */
- if (!test_bit(XEN_HVM_EVTCHN_CALLBACK, used_vectors))
- alloc_intr_gate(XEN_HVM_EVTCHN_CALLBACK, xen_hvm_callback_vector);
+ if (!test_bit(HYPERVISOR_CALLBACK_VECTOR, used_vectors))
+ alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR,
+ xen_hvm_callback_vector);
}
}
#else
diff --git a/drivers/xen/pcpu.c b/drivers/xen/pcpu.c
index 067fcfa..5a27a45 100644
--- a/drivers/xen/pcpu.c
+++ b/drivers/xen/pcpu.c
@@ -278,8 +278,7 @@
* Only those at cpu present map has its sys interface.
*/
if (info->flags & XEN_PCPU_FLAGS_INVALID) {
- if (pcpu)
- unregister_and_remove_pcpu(pcpu);
+ unregister_and_remove_pcpu(pcpu);
return 0;
}
diff --git a/drivers/xen/xen-acpi-pad.c b/drivers/xen/xen-acpi-pad.c
index da39191..c763479 100644
--- a/drivers/xen/xen-acpi-pad.c
+++ b/drivers/xen/xen-acpi-pad.c
@@ -140,8 +140,7 @@
return 0;
}
-static int acpi_pad_remove(struct acpi_device *device,
- int type)
+static int acpi_pad_remove(struct acpi_device *device)
{
mutex_lock(&xen_cpu_lock);
xen_acpi_pad_idle_cpus(0);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 0c42cdb..49d0b43 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -33,6 +33,7 @@
#include <linux/elf.h>
#include <linux/utsname.h>
#include <linux/coredump.h>
+#include <linux/sched.h>
#include <asm/uaccess.h>
#include <asm/param.h>
#include <asm/page.h>
@@ -1320,8 +1321,11 @@
cputime_to_timeval(cputime.utime, &prstatus->pr_utime);
cputime_to_timeval(cputime.stime, &prstatus->pr_stime);
} else {
- cputime_to_timeval(p->utime, &prstatus->pr_utime);
- cputime_to_timeval(p->stime, &prstatus->pr_stime);
+ cputime_t utime, stime;
+
+ task_cputime(p, &utime, &stime);
+ cputime_to_timeval(utime, &prstatus->pr_utime);
+ cputime_to_timeval(stime, &prstatus->pr_stime);
}
cputime_to_timeval(p->signal->cutime, &prstatus->pr_cutime);
cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index dc84732..cb240dd 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1375,8 +1375,11 @@
cputime_to_timeval(cputime.utime, &prstatus->pr_utime);
cputime_to_timeval(cputime.stime, &prstatus->pr_stime);
} else {
- cputime_to_timeval(p->utime, &prstatus->pr_utime);
- cputime_to_timeval(p->stime, &prstatus->pr_stime);
+ cputime_t utime, stime;
+
+ task_cputime(p, &utime, &stime);
+ cputime_to_timeval(utime, &prstatus->pr_utime);
+ cputime_to_timeval(stime, &prstatus->pr_stime);
}
cputime_to_timeval(p->signal->cutime, &prstatus->pr_cutime);
cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 6a91e6f..f7ed9ee 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -449,7 +449,7 @@
do {
min_flt += t->min_flt;
maj_flt += t->maj_flt;
- gtime += t->gtime;
+ gtime += task_gtime(t);
t = next_thread(t);
} while (t != task);
@@ -472,7 +472,7 @@
min_flt = task->min_flt;
maj_flt = task->maj_flt;
task_cputime_adjusted(task, &utime, &stime);
- gtime = task->gtime;
+ gtime = task_gtime(task);
}
/* scale priority and nice values from timeslices to -20..20 */
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 7003e52..288f068 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -167,12 +167,16 @@
static size_t ramoops_write_kmsg_hdr(struct persistent_ram_zone *prz)
{
char *hdr;
- struct timeval timestamp;
+ struct timespec timestamp;
size_t len;
- do_gettimeofday(×tamp);
+ /* Report zeroed timestamp if called before timekeeping has resumed. */
+ if (__getnstimeofday(×tamp)) {
+ timestamp.tv_sec = 0;
+ timestamp.tv_nsec = 0;
+ }
hdr = kasprintf(GFP_ATOMIC, RAMOOPS_KERNMSG_HDR "%lu.%lu\n",
- (long)timestamp.tv_sec, (long)timestamp.tv_usec);
+ (long)timestamp.tv_sec, (long)(timestamp.tv_nsec / 1000));
WARN_ON_ONCE(!hdr);
len = hdr ? strlen(hdr) : 0;
persistent_ram_write(prz, hdr, len);
diff --git a/fs/select.c b/fs/select.c
index 2ef72d9..8c1c96c 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -26,6 +26,7 @@
#include <linux/fs.h>
#include <linux/rcupdate.h>
#include <linux/hrtimer.h>
+#include <linux/sched/rt.h>
#include <asm/uaccess.h>
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index 2df555c..aec3d5c 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -205,6 +205,48 @@
}
EXPORT_SYMBOL_GPL(sysfs_unmerge_group);
+/**
+ * sysfs_add_link_to_group - add a symlink to an attribute group.
+ * @kobj: The kobject containing the group.
+ * @group_name: The name of the group.
+ * @target: The target kobject of the symlink to create.
+ * @link_name: The name of the symlink to create.
+ */
+int sysfs_add_link_to_group(struct kobject *kobj, const char *group_name,
+ struct kobject *target, const char *link_name)
+{
+ struct sysfs_dirent *dir_sd;
+ int error = 0;
+
+ dir_sd = sysfs_get_dirent(kobj->sd, NULL, group_name);
+ if (!dir_sd)
+ return -ENOENT;
+
+ error = sysfs_create_link_sd(dir_sd, target, link_name);
+ sysfs_put(dir_sd);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(sysfs_add_link_to_group);
+
+/**
+ * sysfs_remove_link_from_group - remove a symlink from an attribute group.
+ * @kobj: The kobject containing the group.
+ * @group_name: The name of the group.
+ * @link_name: The name of the symlink to remove.
+ */
+void sysfs_remove_link_from_group(struct kobject *kobj, const char *group_name,
+ const char *link_name)
+{
+ struct sysfs_dirent *dir_sd;
+
+ dir_sd = sysfs_get_dirent(kobj->sd, NULL, group_name);
+ if (dir_sd) {
+ sysfs_hash_and_remove(dir_sd, NULL, link_name);
+ sysfs_put(dir_sd);
+ }
+}
+EXPORT_SYMBOL_GPL(sysfs_remove_link_from_group);
EXPORT_SYMBOL_GPL(sysfs_create_group);
EXPORT_SYMBOL_GPL(sysfs_update_group);
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index 3c9eb56..8c940df 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -21,26 +21,17 @@
#include "sysfs.h"
-static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
- const char *name, int warn)
+static int sysfs_do_create_link_sd(struct sysfs_dirent *parent_sd,
+ struct kobject *target,
+ const char *name, int warn)
{
- struct sysfs_dirent *parent_sd = NULL;
struct sysfs_dirent *target_sd = NULL;
struct sysfs_dirent *sd = NULL;
struct sysfs_addrm_cxt acxt;
enum kobj_ns_type ns_type;
int error;
- BUG_ON(!name);
-
- if (!kobj)
- parent_sd = &sysfs_root;
- else
- parent_sd = kobj->sd;
-
- error = -EFAULT;
- if (!parent_sd)
- goto out_put;
+ BUG_ON(!name || !parent_sd);
/* target->sd can go away beneath us but is protected with
* sysfs_assoc_lock. Fetch target_sd from it.
@@ -96,6 +87,34 @@
}
/**
+ * sysfs_create_link_sd - create symlink to a given object.
+ * @sd: directory we're creating the link in.
+ * @target: object we're pointing to.
+ * @name: name of the symlink.
+ */
+int sysfs_create_link_sd(struct sysfs_dirent *sd, struct kobject *target,
+ const char *name)
+{
+ return sysfs_do_create_link_sd(sd, target, name, 1);
+}
+
+static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
+ const char *name, int warn)
+{
+ struct sysfs_dirent *parent_sd = NULL;
+
+ if (!kobj)
+ parent_sd = &sysfs_root;
+ else
+ parent_sd = kobj->sd;
+
+ if (!parent_sd)
+ return -EFAULT;
+
+ return sysfs_do_create_link_sd(parent_sd, target, name, warn);
+}
+
+/**
* sysfs_create_link - create symlink between two objects.
* @kobj: object whose directory we're creating the link in.
* @target: object we're pointing to.
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index d73c093..d1e4043 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -240,3 +240,5 @@
* symlink.c
*/
extern const struct inode_operations sysfs_symlink_inode_operations;
+int sysfs_create_link_sd(struct sysfs_dirent *sd, struct kobject *target,
+ const char *name);
diff --git a/include/acpi/acbuffer.h b/include/acpi/acbuffer.h
index a1e45cd..c927a0b 100644
--- a/include/acpi/acbuffer.h
+++ b/include/acpi/acbuffer.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 0943457..14ceff7 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -138,7 +138,7 @@
/* Maximum sleep allowed via Sleep() operator */
-#define ACPI_MAX_SLEEP 2000 /* Two seconds */
+#define ACPI_MAX_SLEEP 2000 /* 2000 millisec == two seconds */
/* Address Range lists are per-space_id (Memory and I/O only) */
@@ -150,11 +150,6 @@
*
*****************************************************************************/
-/* Number of distinct GPE register blocks and register width */
-
-#define ACPI_MAX_GPE_BLOCKS 2
-#define ACPI_GPE_REGISTER_WIDTH 8
-
/* Method info (in WALK_STATE), containing local variables and argumetns */
#define ACPI_METHOD_NUM_LOCALS 8
@@ -163,12 +158,6 @@
#define ACPI_METHOD_NUM_ARGS 7
#define ACPI_METHOD_MAX_ARG 6
-/* Length of _HID, _UID, _CID, and UUID values */
-
-#define ACPI_DEVICE_ID_LENGTH 0x09
-#define ACPI_MAX_CID_LENGTH 48
-#define ACPI_UUID_LENGTH 16
-
/*
* Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
*/
@@ -186,17 +175,6 @@
*/
#define ACPI_RESULTS_OBJ_NUM_MAX 255
-/* Names within the namespace are 4 bytes long */
-
-#define ACPI_NAME_SIZE 4
-#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
-#define ACPI_PATH_SEPARATOR '.'
-
-/* Sizes for ACPI table headers */
-
-#define ACPI_OEM_ID_SIZE 6
-#define ACPI_OEM_TABLE_ID_SIZE 8
-
/* Constants used in searching for the RSDP in low memory */
#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */
@@ -213,6 +191,7 @@
/* Maximum space_ids for Operation Regions */
#define ACPI_MAX_ADDRESS_SPACE 255
+#define ACPI_NUM_DEFAULT_SPACES 4
/* Array sizes. Used for range checking also */
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 6c3890e..9bf59d0 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 7665df6..ce08ef7 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index 2457ac8..9885276 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -72,6 +72,7 @@
#define ACPI_EXAMPLE 0x00004000
#define ACPI_DRIVER 0x00008000
#define DT_COMPILER 0x00010000
+#define ASL_PREPROCESSOR 0x00020000
#define ACPI_ALL_COMPONENTS 0x0001FFFF
#define ACPI_COMPONENT_DEFAULT (ACPI_ALL_COMPONENTS)
@@ -262,18 +263,140 @@
* Common parameters used for debug output functions:
* line number, function name, module(file) name, component ID
*/
-#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
+#define ACPI_DEBUG_PARAMETERS \
+ __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
+
+/* Check if debug output is currently dynamically enabled */
+
+#define ACPI_IS_DEBUG_ENABLED(level, component) \
+ ((level & acpi_dbg_level) && (component & acpi_dbg_layer))
/*
* Master debug print macros
* Print message if and only if:
* 1) Debug print for the current component is enabled
* 2) Debug error level or trace level for the print statement is enabled
+ *
+ * November 2012: Moved the runtime check for whether to actually emit the
+ * debug message outside of the print function itself. This improves overall
+ * performance at a relatively small code cost. Implementation involves the
+ * use of variadic macros supported by C99.
+ *
+ * Note: the ACPI_DO_WHILE0 macro is used to prevent some compilers from
+ * complaining about these constructs. On other compilers the do...while
+ * adds some extra code, so this feature is optional.
*/
-#define ACPI_DEBUG_PRINT(plist) acpi_debug_print plist
-#define ACPI_DEBUG_PRINT_RAW(plist) acpi_debug_print_raw plist
-
+#ifdef ACPI_USE_DO_WHILE_0
+#define ACPI_DO_WHILE0(a) do a while(0)
#else
+#define ACPI_DO_WHILE0(a) a
+#endif
+
+/* DEBUG_PRINT functions */
+
+#define ACPI_DEBUG_PRINT(plist) ACPI_ACTUAL_DEBUG plist
+#define ACPI_DEBUG_PRINT_RAW(plist) ACPI_ACTUAL_DEBUG_RAW plist
+
+/* Helper macros for DEBUG_PRINT */
+
+#define ACPI_DO_DEBUG_PRINT(function, level, line, filename, modulename, component, ...) \
+ ACPI_DO_WHILE0 ({ \
+ if (ACPI_IS_DEBUG_ENABLED (level, component)) \
+ { \
+ function (level, line, filename, modulename, component, __VA_ARGS__); \
+ } \
+ })
+
+#define ACPI_ACTUAL_DEBUG(level, line, filename, modulename, component, ...) \
+ ACPI_DO_DEBUG_PRINT (acpi_debug_print, level, line, \
+ filename, modulename, component, __VA_ARGS__)
+
+#define ACPI_ACTUAL_DEBUG_RAW(level, line, filename, modulename, component, ...) \
+ ACPI_DO_DEBUG_PRINT (acpi_debug_print_raw, level, line, \
+ filename, modulename, component, __VA_ARGS__)
+
+/*
+ * Function entry tracing
+ *
+ * The name of the function is emitted as a local variable that is
+ * intended to be used by both the entry trace and the exit trace.
+ */
+
+/* Helper macro */
+
+#define ACPI_TRACE_ENTRY(name, function, cast, param) \
+ ACPI_FUNCTION_NAME (name) \
+ function (ACPI_DEBUG_PARAMETERS, cast (param))
+
+/* The actual entry trace macros */
+
+#define ACPI_FUNCTION_TRACE(name) \
+ ACPI_FUNCTION_NAME(name) \
+ acpi_ut_trace (ACPI_DEBUG_PARAMETERS)
+
+#define ACPI_FUNCTION_TRACE_PTR(name, pointer) \
+ ACPI_TRACE_ENTRY (name, acpi_ut_trace_ptr, (void *), pointer)
+
+#define ACPI_FUNCTION_TRACE_U32(name, value) \
+ ACPI_TRACE_ENTRY (name, acpi_ut_trace_u32, (u32), value)
+
+#define ACPI_FUNCTION_TRACE_STR(name, string) \
+ ACPI_TRACE_ENTRY (name, acpi_ut_trace_str, (char *), string)
+
+#define ACPI_FUNCTION_ENTRY() \
+ acpi_ut_track_stack_ptr()
+
+/*
+ * Function exit tracing
+ *
+ * These macros include a return statement. This is usually considered
+ * bad form, but having a separate exit macro before the actual return
+ * is very ugly and difficult to maintain.
+ *
+ * One of the FUNCTION_TRACE macros above must be used in conjunction
+ * with these macros so that "_AcpiFunctionName" is defined.
+ */
+
+/* Exit trace helper macro */
+
+#define ACPI_TRACE_EXIT(function, cast, param) \
+ ACPI_DO_WHILE0 ({ \
+ function (ACPI_DEBUG_PARAMETERS, cast (param)); \
+ return ((param)); \
+ })
+
+/* The actual exit macros */
+
+#define return_VOID \
+ ACPI_DO_WHILE0 ({ \
+ acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
+ return; \
+ })
+
+#define return_ACPI_STATUS(status) \
+ ACPI_TRACE_EXIT (acpi_ut_status_exit, (acpi_status), status)
+
+#define return_PTR(pointer) \
+ ACPI_TRACE_EXIT (acpi_ut_ptr_exit, (u8 *), pointer)
+
+#define return_VALUE(value) \
+ ACPI_TRACE_EXIT (acpi_ut_value_exit, (u64), value)
+
+/* Conditional execution */
+
+#define ACPI_DEBUG_EXEC(a) a
+#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
+#define _VERBOSE_STRUCTURES
+
+/* Various object display routines for debug */
+
+#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0)
+#define ACPI_DUMP_OPERANDS(a, b ,c) acpi_ex_dump_operands(a, b, c)
+#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d)
+#define ACPI_DUMP_BUFFER(a, b) acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
+
+#else /* ACPI_DEBUG_OUTPUT */
/*
* This is the non-debug case -- make everything go away,
* leaving no executable debug code!
@@ -281,6 +404,32 @@
#define ACPI_FUNCTION_NAME(a)
#define ACPI_DEBUG_PRINT(pl)
#define ACPI_DEBUG_PRINT_RAW(pl)
+#define ACPI_DEBUG_EXEC(a)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)
+#define ACPI_FUNCTION_TRACE_U32(a, b)
+#define ACPI_FUNCTION_TRACE_STR(a, b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a, b, c)
+#define ACPI_DUMP_ENTRY(a, b)
+#define ACPI_DUMP_TABLES(a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)
+#define ACPI_DUMP_BUFFER(a, b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
+#define ACPI_IS_DEBUG_ENABLED(level, component) 0
+
+/* Return macros must have a return statement at the minimum */
+
+#define return_VOID return
+#define return_ACPI_STATUS(s) return(s)
+#define return_VALUE(s) return(s)
+#define return_PTR(s) return(s)
#endif /* ACPI_DEBUG_OUTPUT */
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
index c1ea843..6187877 100644
--- a/include/acpi/acpi.h
+++ b/include/acpi/acpi.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7ced5dc..227ba7d 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -84,28 +84,29 @@
struct acpi_device;
/*
+ * ACPI Scan Handler
+ * -----------------
+ */
+
+struct acpi_scan_handler {
+ const struct acpi_device_id *ids;
+ struct list_head list_node;
+ int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
+ void (*detach)(struct acpi_device *dev);
+};
+
+/*
* ACPI Driver
* -----------
*/
typedef int (*acpi_op_add) (struct acpi_device * device);
-typedef int (*acpi_op_remove) (struct acpi_device * device, int type);
-typedef int (*acpi_op_start) (struct acpi_device * device);
-typedef int (*acpi_op_bind) (struct acpi_device * device);
-typedef int (*acpi_op_unbind) (struct acpi_device * device);
+typedef int (*acpi_op_remove) (struct acpi_device * device);
typedef void (*acpi_op_notify) (struct acpi_device * device, u32 event);
-struct acpi_bus_ops {
- u32 acpi_op_add:1;
- u32 acpi_op_start:1;
-};
-
struct acpi_device_ops {
acpi_op_add add;
acpi_op_remove remove;
- acpi_op_start start;
- acpi_op_bind bind;
- acpi_op_unbind unbind;
acpi_op_notify notify;
};
@@ -148,7 +149,8 @@
u32 power_manageable:1;
u32 performance_manageable:1;
u32 eject_pending:1;
- u32 reserved:24;
+ u32 match_driver:1;
+ u32 reserved:23;
};
/* File System */
@@ -207,7 +209,7 @@
} flags;
int power; /* % Power (compared to D0) */
int latency; /* Dx->D0 time (microseconds) */
- struct acpi_handle_list resources; /* Power resources referenced */
+ struct list_head resources; /* Power resources referenced */
};
struct acpi_device_power {
@@ -250,7 +252,7 @@
acpi_handle gpe_device;
u64 gpe_number;
u64 sleep_state;
- struct acpi_handle_list resources;
+ struct list_head resources;
struct acpi_device_wakeup_flags flags;
int prepare_count;
};
@@ -279,16 +281,17 @@
struct acpi_device_wakeup wakeup;
struct acpi_device_perf performance;
struct acpi_device_dir dir;
- struct acpi_device_ops ops;
+ struct acpi_scan_handler *handler;
struct acpi_driver *driver;
void *driver_data;
struct device dev;
- struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */
enum acpi_bus_removal_type removal_type; /* indicate for different removal type */
u8 physical_node_count;
struct list_head physical_node_list;
struct mutex physical_node_lock;
DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE);
+ struct list_head power_dependent;
+ void (*remove)(struct acpi_device *);
};
static inline void *acpi_driver_data(struct acpi_device *d)
@@ -316,7 +319,7 @@
};
struct acpi_eject_event {
- acpi_handle handle;
+ struct acpi_device *device;
u32 event;
};
@@ -339,13 +342,51 @@
acpi_status acpi_bus_get_status_handle(acpi_handle handle,
unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
+
+#ifdef CONFIG_PM
int acpi_bus_set_power(acpi_handle handle, int state);
+const char *acpi_power_state_string(int state);
+int acpi_device_get_power(struct acpi_device *device, int *state);
int acpi_device_set_power(struct acpi_device *device, int state);
+int acpi_bus_init_power(struct acpi_device *device);
int acpi_bus_update_power(acpi_handle handle, int *state_p);
bool acpi_bus_power_manageable(acpi_handle handle);
bool acpi_bus_can_wakeup(acpi_handle handle);
-int acpi_power_resource_register_device(struct device *dev, acpi_handle handle);
-void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle);
+#else /* !CONFIG_PM */
+static inline int acpi_bus_set_power(acpi_handle handle, int state)
+{
+ return 0;
+}
+static inline const char *acpi_power_state_string(int state)
+{
+ return "D0";
+}
+static inline int acpi_device_get_power(struct acpi_device *device, int *state)
+{
+ return 0;
+}
+static inline int acpi_device_set_power(struct acpi_device *device, int state)
+{
+ return 0;
+}
+static inline int acpi_bus_init_power(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_bus_update_power(acpi_handle handle, int *state_p)
+{
+ return 0;
+}
+static inline bool acpi_bus_power_manageable(acpi_handle handle)
+{
+ return false;
+}
+static inline bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+ return false;
+}
+#endif /* !CONFIG_PM */
+
#ifdef CONFIG_ACPI_PROC_EVENT
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
@@ -354,13 +395,15 @@
static inline int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
{ return 0; }
#endif
+
+void acpi_scan_lock_acquire(void);
+void acpi_scan_lock_release(void);
+int acpi_scan_add_handler(struct acpi_scan_handler *handler);
int acpi_bus_register_driver(struct acpi_driver *driver);
void acpi_bus_unregister_driver(struct acpi_driver *driver);
-int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent,
- acpi_handle handle, int type);
+int acpi_bus_scan(acpi_handle handle);
void acpi_bus_hot_remove_device(void *context);
-int acpi_bus_trim(struct acpi_device *start, int rmdevice);
-int acpi_bus_start(struct acpi_device *device);
+void acpi_bus_trim(struct acpi_device *start);
acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
int acpi_match_device_ids(struct acpi_device *device,
const struct acpi_device_id *ids);
@@ -390,6 +433,8 @@
int (*find_device) (struct device *, acpi_handle *);
/* For bridges, such as PCI root bridge, IDE controller */
int (*find_bridge) (struct device *, acpi_handle *);
+ void (*setup)(struct device *);
+ void (*cleanup)(struct device *);
};
int register_acpi_bus_type(struct acpi_bus_type *);
int unregister_acpi_bus_type(struct acpi_bus_type *);
@@ -397,7 +442,6 @@
struct acpi_pci_root {
struct list_head node;
struct acpi_device * device;
- struct acpi_pci_id id;
struct pci_bus *bus;
u16 segment;
struct resource secondary; /* downstream bus range */
@@ -425,6 +469,8 @@
int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
u32 target_state, int d_max_in, int *d_min_p);
int acpi_pm_device_sleep_state(struct device *, int *, int);
+void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev);
+void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev);
#else
static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
acpi_notify_handler handler,
@@ -454,6 +500,10 @@
{
return __acpi_device_power_state(m, p);
}
+static inline void acpi_dev_pm_add_dependent(acpi_handle handle,
+ struct device *depdev) {}
+static inline void acpi_dev_pm_remove_dependent(acpi_handle handle,
+ struct device *depdev) {}
#endif
#ifdef CONFIG_PM_RUNTIME
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 4315274..7d2a9ea 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -102,10 +102,8 @@
/*
* Spinlock primitives
*/
-
#ifndef acpi_os_create_lock
-acpi_status
-acpi_os_create_lock(acpi_spinlock *out_handle);
+acpi_status acpi_os_create_lock(acpi_spinlock * out_handle);
#endif
void acpi_os_delete_lock(acpi_spinlock handle);
@@ -148,6 +146,8 @@
*/
void *acpi_os_allocate(acpi_size size);
+void acpi_os_free(void *memory);
+
void __iomem *acpi_os_map_memory(acpi_physical_address where,
acpi_size length);
@@ -180,12 +180,13 @@
* Interrupt handlers
*/
acpi_status
-acpi_os_install_interrupt_handler(u32 gsi,
+acpi_os_install_interrupt_handler(u32 interrupt_number,
acpi_osd_handler service_routine,
void *context);
acpi_status
-acpi_os_remove_interrupt_handler(u32 gsi, acpi_osd_handler service_routine);
+acpi_os_remove_interrupt_handler(u32 interrupt_number,
+ acpi_osd_handler service_routine);
void acpi_os_gpe_count(u32 gpe_number);
void acpi_os_fixed_event_count(u32 fixed_event_number);
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 3d88395..03322dd 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -46,7 +46,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20121018
+#define ACPI_CA_VERSION 0x20130117
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
@@ -56,11 +56,20 @@
extern u8 acpi_gbl_permanent_mmap;
/*
- * Globals that are publicly available, allowing for
- * run time configuration
+ * Globals that are publically available
*/
+extern u32 acpi_current_gpe_count;
+extern struct acpi_table_fadt acpi_gbl_FADT;
+extern u8 acpi_gbl_system_awake_and_running;
+extern u8 acpi_gbl_reduced_hardware; /* ACPI 5.0 */
+
+/* Runtime configuration of debug print levels */
+
extern u32 acpi_dbg_level;
extern u32 acpi_dbg_layer;
+
+/* ACPICA runtime options */
+
extern u8 acpi_gbl_enable_interpreter_slack;
extern u8 acpi_gbl_all_methods_serialized;
extern u8 acpi_gbl_create_osi_method;
@@ -99,14 +108,9 @@
#endif /* !ACPI_REDUCED_HARDWARE */
-extern u32 acpi_current_gpe_count;
-extern struct acpi_table_fadt acpi_gbl_FADT;
-extern u8 acpi_gbl_system_awake_and_running;
-extern u8 acpi_gbl_reduced_hardware; /* ACPI 5.0 */
-
extern u32 acpi_rsdt_forced;
/*
- * Global interfaces
+ * Initialization
*/
acpi_status
acpi_initialize_tables(struct acpi_table_desc *initial_storage,
@@ -120,13 +124,15 @@
acpi_status acpi_terminate(void);
+/*
+ * Miscellaneous global interfaces
+ */
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void))
#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_subsystem_status(void);
#endif
-ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void))
-ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void))
-
#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_get_system_info(struct acpi_buffer *ret_buffer);
#endif
@@ -191,9 +197,9 @@
acpi_get_table_by_index(u32 table_index, struct acpi_table_header **out_table);
acpi_status
-acpi_install_table_handler(acpi_tbl_handler handler, void *context);
+acpi_install_table_handler(acpi_table_handler handler, void *context);
-acpi_status acpi_remove_table_handler(acpi_tbl_handler handler);
+acpi_status acpi_remove_table_handler(acpi_table_handler handler);
/*
* Namespace and name interfaces
@@ -438,6 +444,11 @@
struct acpi_buffer *ret_buffer);
acpi_status
+acpi_walk_resource_buffer(struct acpi_buffer *buffer,
+ acpi_walk_resource_callback user_function,
+ void *context);
+
+acpi_status
acpi_walk_resources(acpi_handle device,
char *name,
acpi_walk_resource_callback user_function, void *context);
@@ -462,6 +473,10 @@
*/
acpi_status acpi_reset(void);
+acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
+
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
+
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
acpi_read_bit_register(u32 register_id,
u32 *return_value))
@@ -470,20 +485,6 @@
acpi_write_bit_register(u32 register_id,
u32 value))
-ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
- acpi_set_firmware_waking_vector(u32
- physical_address))
-
-#if ACPI_MACHINE_WIDTH == 64
-ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
- acpi_set_firmware_waking_vector64(u64
- physical_address))
-#endif
-
-acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
-
-acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
-
/*
* Sleep/Wake interfaces
*/
@@ -500,6 +501,15 @@
acpi_status acpi_leave_sleep_state(u8 sleep_state);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_firmware_waking_vector(u32
+ physical_address))
+
+#if ACPI_MACHINE_WIDTH == 64
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_firmware_waking_vector64(u64
+ physical_address))
+#endif
/*
* ACPI Timer interfaces
*/
diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
index 40349ae..cbf4bf9 100644
--- a/include/acpi/acrestyp.h
+++ b/include/acpi/acrestyp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -102,8 +102,11 @@
#define ACPI_EXCLUSIVE (u8) 0x00
#define ACPI_SHARED (u8) 0x01
-#define ACPI_EXCLUSIVE_AND_WAKE (u8) 0x02
-#define ACPI_SHARED_AND_WAKE (u8) 0x03
+
+/* Wake */
+
+#define ACPI_NOT_WAKE_CAPABLE (u8) 0x00
+#define ACPI_WAKE_CAPABLE (u8) 0x01
/*
* DMA Attributes
@@ -171,6 +174,7 @@
u8 triggering;
u8 polarity;
u8 sharable;
+ u8 wake_capable;
u8 interrupt_count;
u8 interrupts[1];
};
@@ -346,6 +350,7 @@
u8 triggering;
u8 polarity;
u8 sharable;
+ u8 wake_capable;
u8 interrupt_count;
struct acpi_resource_source resource_source;
u32 interrupts[1];
@@ -365,6 +370,7 @@
u8 producer_consumer; /* For values, see Producer/Consumer above */
u8 pin_config;
u8 sharable; /* For values, see Interrupt Attributes above */
+ u8 wake_capable; /* For values, see Interrupt Attributes above */
u8 io_restriction;
u8 triggering; /* For values, see Interrupt Attributes above */
u8 polarity; /* For values, see Interrupt Attributes above */
@@ -591,7 +597,10 @@
#define ACPI_RS_SIZE_MIN (u32) ACPI_ROUND_UP_TO_NATIVE_WORD (12)
#define ACPI_RS_SIZE(type) (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type))
-#define ACPI_NEXT_RESOURCE(res) (struct acpi_resource *)((u8 *) res + res->length)
+/* Macro for walking resource templates with multiple descriptors */
+
+#define ACPI_NEXT_RESOURCE(res) \
+ ACPI_ADD_PTR (struct acpi_resource, (res), (res)->length)
struct acpi_pci_routing_table {
u32 length;
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 4f94b1d..9b58a8f 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -326,8 +326,6 @@
#pragma pack()
-#define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
-
/*
* Internal table-related structures
*/
@@ -359,11 +357,14 @@
/*
* Get the remaining ACPI tables
*/
-
#include <acpi/actbl1.h>
#include <acpi/actbl2.h>
#include <acpi/actbl3.h>
+/* Macros used to generate offsets to specific table fields */
+
+#define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
+
/*
* Sizes of the various flavors of FADT. We need to look closely
* at the FADT length because the version number essentially tells
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 280fc45..0bd750e 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -768,7 +768,7 @@
struct acpi_madt_local_x2apic {
struct acpi_subtable_header header;
- u16 reserved; /* Reserved - must be zero */
+ u16 reserved; /* reserved - must be zero */
u32 local_apic_id; /* Processor x2APIC ID */
u32 lapic_flags;
u32 uid; /* ACPI processor UID */
@@ -781,14 +781,14 @@
u16 inti_flags;
u32 uid; /* ACPI processor UID */
u8 lint; /* LINTn to which NMI is connected */
- u8 reserved[3];
+ u8 reserved[3]; /* reserved - must be zero */
};
/* 11: Generic Interrupt (ACPI 5.0) */
struct acpi_madt_generic_interrupt {
struct acpi_subtable_header header;
- u16 reserved; /* Reserved - must be zero */
+ u16 reserved; /* reserved - must be zero */
u32 gic_id;
u32 uid;
u32 flags;
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 1b2b356..77dc7a4 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -261,9 +261,28 @@
u16 subdevice_id;
u16 revision;
u16 reserved;
- u32 info_length;
+ u32 shared_info_length;
- /* Shared data (length = info_length) immediately follows */
+ /* Shared data immediately follows (Length = shared_info_length) */
+};
+
+/* Shared Info subtable */
+
+struct acpi_csrt_shared_info {
+ u16 major_version;
+ u16 minor_version;
+ u32 mmio_base_low;
+ u32 mmio_base_high;
+ u32 gsi_interrupt;
+ u8 interrupt_polarity;
+ u8 interrupt_mode;
+ u8 num_channels;
+ u8 dma_address_width;
+ u16 base_request_line;
+ u16 num_handshake_signals;
+ u32 max_block_size;
+
+ /* Resource descriptors immediately follow (Length = Group length - shared_info_length) */
};
/* Resource Descriptor subtable */
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index 6585141..332b17e 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -68,13 +68,13 @@
#define ACPI_SIG_PCCT "PCCT" /* Platform Communications Channel Table */
#define ACPI_SIG_PMTT "PMTT" /* Platform Memory Topology Table */
#define ACPI_SIG_RASF "RASF" /* RAS Feature table */
+#define ACPI_SIG_TPM2 "TPM2" /* Trusted Platform Module 2.0 H/W interface table */
#define ACPI_SIG_S3PT "S3PT" /* S3 Performance (sub)Table */
#define ACPI_SIG_PCCS "PCC" /* PCC Shared Memory Region */
/* Reserved table signatures */
-#define ACPI_SIG_CSRT "CSRT" /* Core System Resources Table */
#define ACPI_SIG_MATR "MATR" /* Memory Address Translation Table */
#define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */
#define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */
@@ -550,6 +550,36 @@
#define ACPI_RASF_ERROR (1<<2)
#define ACPI_RASF_STATUS (0x1F<<3)
+/*******************************************************************************
+ *
+ * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table
+ * Version 3
+ *
+ * Conforms to "TPM 2.0 Hardware Interface Table (TPM2)" 29 November 2011
+ *
+ ******************************************************************************/
+
+struct acpi_table_tpm2 {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 flags;
+ u64 control_address;
+ u32 start_method;
+};
+
+/* Control area structure (not part of table, pointed to by control_address) */
+
+struct acpi_tpm2_control {
+ u32 reserved;
+ u32 error;
+ u32 cancel;
+ u32 start;
+ u64 interrupt_control;
+ u32 command_size;
+ u64 command_address;
+ u32 response_size;
+ u64 response_address;
+};
+
/* Reset to default packing */
#pragma pack()
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 4f43f1f..845e75f 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -341,7 +341,7 @@
/* PM Timer ticks per second (HZ) */
-#define PM_TIMER_FREQUENCY 3579545
+#define ACPI_PM_TIMER_FREQUENCY 3579545
/*******************************************************************************
*
@@ -373,6 +373,21 @@
typedef char *acpi_string; /* Null terminated ASCII string */
typedef void *acpi_handle; /* Actually a ptr to a NS Node */
+/* Time constants for timer calculations */
+
+#define ACPI_MSEC_PER_SEC 1000L
+
+#define ACPI_USEC_PER_MSEC 1000L
+#define ACPI_USEC_PER_SEC 1000000L
+
+#define ACPI_100NSEC_PER_USEC 10L
+#define ACPI_100NSEC_PER_MSEC 10000L
+#define ACPI_100NSEC_PER_SEC 10000000L
+
+#define ACPI_NSEC_PER_USEC 1000L
+#define ACPI_NSEC_PER_MSEC 1000000L
+#define ACPI_NSEC_PER_SEC 1000000000L
+
/* Owner IDs are used to track namespace nodes for selective deletion */
typedef u8 acpi_owner_id;
@@ -390,10 +405,6 @@
#define ACPI_MAX16_DECIMAL_DIGITS 5
#define ACPI_MAX8_DECIMAL_DIGITS 3
-/* PM Timer ticks per second (HZ) */
-
-#define PM_TIMER_FREQUENCY 3579545
-
/*
* Constants with special meanings
*/
@@ -474,6 +485,7 @@
*/
#define ACPI_FULL_INITIALIZATION 0x00
#define ACPI_NO_ADDRESS_SPACE_INIT 0x01
+#define ACPI_NO_HARDWARE_INIT 0x02
#define ACPI_NO_EVENT_INIT 0x04
#define ACPI_NO_HANDLER_INIT 0x08
#define ACPI_NO_ACPI_ENABLE 0x10
@@ -595,7 +607,7 @@
/*
* These are special object types that never appear in
- * a Namespace node, only in a union acpi_operand_object
+ * a Namespace node, only in an object of union acpi_operand_object
*/
#define ACPI_TYPE_LOCAL_EXTRA 0x1C
#define ACPI_TYPE_LOCAL_DATA 0x1D
@@ -662,7 +674,7 @@
#define ACPI_GPE_MAX 0xFF
#define ACPI_NUM_GPE 256
-/* Actions for acpi_set_gpe_wake_mask, acpi_hw_low_set_gpe */
+/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
#define ACPI_GPE_ENABLE 0
#define ACPI_GPE_DISABLE 1
@@ -880,6 +892,10 @@
void *pointer; /* pointer to buffer */
};
+/* Free a buffer created in an struct acpi_buffer via ACPI_ALLOCATE_LOCAL_BUFFER */
+
+#define ACPI_FREE_BUFFER(b) ACPI_FREE(b.pointer)
+
/*
* name_type for acpi_get_name
*/
@@ -968,7 +984,11 @@
/* Table Event handler (Load, load_table, etc.) and types */
typedef
-acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context);
+acpi_status(*acpi_table_handler) (u32 event, void *table, void *context);
+
+#define ACPI_TABLE_LOAD 0x0
+#define ACPI_TABLE_UNLOAD 0x1
+#define ACPI_NUM_TABLE_EVENTS 2
/* Address Spaces (For Operation Regions) */
diff --git a/include/acpi/container.h b/include/acpi/container.h
deleted file mode 100644
index a703f14..0000000
--- a/include/acpi/container.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ACPI_CONTAINER_H
-#define __ACPI_CONTAINER_H
-
-#include <linux/kernel.h>
-
-struct acpi_container {
- acpi_handle handle;
- unsigned long sun;
- int state;
-};
-
-#endif /* __ACPI_CONTAINER_H */
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index 89cee88..ef04b36 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -1,11 +1,11 @@
/******************************************************************************
*
- * Name: acenv.h - Generation environment specific items
+ * Name: acenv.h - Host and compiler configuration
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,6 +44,12 @@
#ifndef __ACENV_H__
#define __ACENV_H__
+/*
+ * Environment configuration. The purpose of this file is to interface ACPICA
+ * to the local environment. This includes compiler-specific, OS-specific,
+ * and machine-specific configuration.
+ */
+
/* Types for ACPI_MUTEX_TYPE */
#define ACPI_BINARY_SEMAPHORE 0
@@ -60,139 +66,170 @@
*
*****************************************************************************/
-#ifdef ACPI_LIBRARY
-/*
- * Note: The non-debug version of the acpi_library does not contain any
- * debug support, for minimal size. The debug version uses ACPI_FULL_DEBUG
- */
-#define ACPI_USE_LOCAL_CACHE
-#endif
+/* iASL configuration */
#ifdef ACPI_ASL_COMPILER
-#define ACPI_DEBUG_OUTPUT
#define ACPI_APPLICATION
#define ACPI_DISASSEMBLER
+#define ACPI_DEBUG_OUTPUT
#define ACPI_CONSTANT_EVAL_ONLY
#define ACPI_LARGE_NAMESPACE_NODE
#define ACPI_DATA_TABLE_DISASSEMBLY
+#define ACPI_SINGLE_THREADED
#endif
+/* acpi_exec configuration. Multithreaded with full AML debugger */
+
#ifdef ACPI_EXEC_APP
-#undef DEBUGGER_THREADING
-#define DEBUGGER_THREADING DEBUGGER_SINGLE_THREADED
-#define ACPI_FULL_DEBUG
#define ACPI_APPLICATION
-#define ACPI_DEBUGGER
+#define ACPI_FULL_DEBUG
#define ACPI_MUTEX_DEBUG
#define ACPI_DBG_TRACK_ALLOCATIONS
#endif
+/* acpi_names configuration. Single threaded with debugger output enabled. */
+
+#ifdef ACPI_NAMES_APP
+#define ACPI_DEBUGGER
+#define ACPI_APPLICATION
+#define ACPI_SINGLE_THREADED
+#endif
+
+/*
+ * acpi_bin/acpi_help/acpi_src configuration. All single threaded, with
+ * no debug output.
+ */
+#if (defined ACPI_BIN_APP) || \
+ (defined ACPI_SRC_APP) || \
+ (defined ACPI_XTRACT_APP)
+#define ACPI_APPLICATION
+#define ACPI_SINGLE_THREADED
+#endif
+
+#ifdef ACPI_HELP_APP
+#define ACPI_APPLICATION
+#define ACPI_SINGLE_THREADED
+#define ACPI_NO_ERROR_MESSAGES
+#endif
+
+/* Linkable ACPICA library */
+
+#ifdef ACPI_LIBRARY
+#define ACPI_USE_LOCAL_CACHE
+#define ACPI_FUTURE_USAGE
+#endif
+
+/* Common for all ACPICA applications */
+
#ifdef ACPI_APPLICATION
#define ACPI_USE_SYSTEM_CLIBRARY
#define ACPI_USE_LOCAL_CACHE
#endif
+/* Common debug support */
+
#ifdef ACPI_FULL_DEBUG
#define ACPI_DEBUGGER
#define ACPI_DEBUG_OUTPUT
#define ACPI_DISASSEMBLER
#endif
-/*
- * Environment configuration. The purpose of this file is to interface to the
- * local generation environment.
- *
- * 1) ACPI_USE_SYSTEM_CLIBRARY - Define this if linking to an actual C library.
- * Otherwise, local versions of string/memory functions will be used.
- * 2) ACPI_USE_STANDARD_HEADERS - Define this if linking to a C library and
- * the standard header files may be used.
- *
- * The ACPI subsystem only uses low level C library functions that do not call
- * operating system services and may therefore be inlined in the code.
- *
- * It may be necessary to tailor these include files to the target
- * generation environment.
- *
- *
- * Functions and constants used from each header:
- *
- * string.h: memcpy
- * memset
- * strcat
- * strcmp
- * strcpy
- * strlen
- * strncmp
- * strncat
- * strncpy
- *
- * stdlib.h: strtoul
- *
- * stdarg.h: va_list
- * va_arg
- * va_start
- * va_end
- *
- */
/*! [Begin] no source code translation */
+/******************************************************************************
+ *
+ * Host configuration files. The compiler configuration files are included
+ * by the host files.
+ *
+ *****************************************************************************/
+
#if defined(_LINUX) || defined(__linux__)
#include <acpi/platform/aclinux.h>
-#elif defined(_AED_EFI)
-#include "acefi.h"
-
-#elif defined(WIN32)
-#include "acwin.h"
-
-#elif defined(WIN64)
-#include "acwin64.h"
-
-#elif defined(MSDOS) /* Must appear after WIN32 and WIN64 check */
-#include "acdos16.h"
-
#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include "acfreebsd.h"
#elif defined(__NetBSD__)
#include "acnetbsd.h"
+#elif defined(__sun)
+#include "acsolaris.h"
+
#elif defined(MODESTO)
#include "acmodesto.h"
#elif defined(NETWARE)
#include "acnetware.h"
-#elif defined(__sun)
-#include "acsolaris.h"
+#elif defined(_CYGWIN)
+#include "accygwin.h"
+
+#elif defined(WIN32)
+#include "acwin.h"
+
+#elif defined(WIN64)
+#include "acwin64.h"
+
+#elif defined(_WRS_LIB_BUILD)
+#include "acvxworks.h"
+
+#elif defined(__OS2__)
+#include "acos2.h"
+
+#elif defined(_AED_EFI)
+#include "acefi.h"
+
+#elif defined(__HAIKU__)
+#include "achaiku.h"
#else
-/* All other environments */
+/* Unknown environment */
-#define ACPI_USE_STANDARD_HEADERS
-
-#define COMPILER_DEPENDENT_INT64 long long
-#define COMPILER_DEPENDENT_UINT64 unsigned long long
-
+#error Unknown target environment
#endif
/*! [End] no source code translation !*/
/******************************************************************************
*
- * Miscellaneous configuration
+ * Setup defaults for the required symbols that were not defined in one of
+ * the host/compiler files above.
*
*****************************************************************************/
-/*
- * Are mutexes supported by the host? default is no, use binary semaphores.
- */
+/* 64-bit data types */
+
+#ifndef COMPILER_DEPENDENT_INT64
+#define COMPILER_DEPENDENT_INT64 long long
+#endif
+
+#ifndef COMPILER_DEPENDENT_UINT64
+#define COMPILER_DEPENDENT_UINT64 unsigned long long
+#endif
+
+/* Type of mutex supported by host. Default is binary semaphores. */
#ifndef ACPI_MUTEX_TYPE
#define ACPI_MUTEX_TYPE ACPI_BINARY_SEMAPHORE
#endif
+/* Global Lock acquire/release */
+
+#ifndef ACPI_ACQUIRE_GLOBAL_LOCK
+#define ACPI_ACQUIRE_GLOBAL_LOCK(Glptr, acquired) acquired = 1
+#endif
+
+#ifndef ACPI_RELEASE_GLOBAL_LOCK
+#define ACPI_RELEASE_GLOBAL_LOCK(Glptr, pending) pending = 0
+#endif
+
+/* Flush CPU cache - used when going to sleep. Wbinvd or similar. */
+
+#ifndef ACPI_FLUSH_CPU_CACHE
+#define ACPI_FLUSH_CPU_CACHE()
+#endif
+
/* "inline" keywords - configurable since inline is not standardized */
#ifndef ACPI_INLINE
@@ -200,6 +237,30 @@
#endif
/*
+ * Configurable calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
+ */
+#ifndef ACPI_SYSTEM_XFACE
+#define ACPI_SYSTEM_XFACE
+#endif
+
+#ifndef ACPI_EXTERNAL_XFACE
+#define ACPI_EXTERNAL_XFACE
+#endif
+
+#ifndef ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#endif
+
+#ifndef ACPI_INTERNAL_VAR_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+#endif
+
+/*
* Debugger threading model
* Use single threaded if the entire subsystem is contained in an application
* Use multiple threaded when the subsystem is running in the kernel.
@@ -222,17 +283,26 @@
*
*****************************************************************************/
-#define ACPI_IS_ASCII(c) ((c) < 0x80)
-
+/*
+ * ACPI_USE_SYSTEM_CLIBRARY - Define this if linking to an actual C library.
+ * Otherwise, local versions of string/memory functions will be used.
+ * ACPI_USE_STANDARD_HEADERS - Define this if linking to a C library and
+ * the standard header files may be used.
+ *
+ * The ACPICA subsystem only uses low level C library functions that do not call
+ * operating system services and may therefore be inlined in the code.
+ *
+ * It may be necessary to tailor these include files to the target
+ * generation environment.
+ */
#ifdef ACPI_USE_SYSTEM_CLIBRARY
-/*
- * Use the standard C library headers.
- * We want to keep these to a minimum.
- */
+
+/* Use the standard C library headers. We want to keep these to a minimum. */
+
#ifdef ACPI_USE_STANDARD_HEADERS
-/*
- * Use the standard headers from the standard locations
- */
+
+/* Use the standard headers from the standard locations */
+
#include <stdarg.h>
#include <stdlib.h>
#include <string.h>
@@ -240,9 +310,8 @@
#endif /* ACPI_USE_STANDARD_HEADERS */
-/*
- * We will be linking to the standard Clib functions
- */
+/* We will be linking to the standard Clib functions */
+
#define ACPI_STRSTR(s1,s2) strstr((s1), (s2))
#define ACPI_STRCHR(s1,c) strchr((s1), (c))
#define ACPI_STRLEN(s) (acpi_size) strlen((s))
@@ -274,13 +343,12 @@
*
*****************************************************************************/
- /*
- * Use local definitions of C library macros and functions
- * NOTE: The function implementations may not be as efficient
- * as an inline or assembly code implementation provided by a
- * native C library.
- */
-
+/*
+ * Use local definitions of C library macros and functions. These function
+ * implementations may not be as efficient as an inline or assembly code
+ * implementation provided by a native C library, but they are functionally
+ * equivalent.
+ */
#ifndef va_arg
#ifndef _VALIST
@@ -288,22 +356,22 @@
typedef char *va_list;
#endif /* _VALIST */
-/*
- * Storage alignment properties
- */
+/* Storage alignment properties */
+
#define _AUPBND (sizeof (acpi_native_int) - 1)
#define _ADNBND (sizeof (acpi_native_int) - 1)
-/*
- * Variable argument list macro definitions
- */
+/* Variable argument list macro definitions */
+
#define _bnd(X, bnd) (((sizeof (X)) + (bnd)) & (~(bnd)))
#define va_arg(ap, T) (*(T *)(((ap) += (_bnd (T, _AUPBND))) - (_bnd (T,_ADNBND))))
-#define va_end(ap) (void) 0
+#define va_end(ap) (ap = (va_list) NULL)
#define va_start(ap, A) (void) ((ap) = (((char *) &(A)) + (_bnd (A,_AUPBND))))
#endif /* va_arg */
+/* Use the local (ACPICA) definitions of the clib functions */
+
#define ACPI_STRSTR(s1,s2) acpi_ut_strstr ((s1), (s2))
#define ACPI_STRCHR(s1,c) acpi_ut_strchr ((s1), (c))
#define ACPI_STRLEN(s) (acpi_size) acpi_ut_strlen ((s))
@@ -322,59 +390,4 @@
#endif /* ACPI_USE_SYSTEM_CLIBRARY */
-/******************************************************************************
- *
- * Assembly code macros
- *
- *****************************************************************************/
-
-/*
- * Handle platform- and compiler-specific assembly language differences.
- * These should already have been defined by the platform includes above.
- *
- * Notes:
- * 1) Interrupt 3 is used to break into a debugger
- * 2) Interrupts are turned off during ACPI register setup
- */
-
-/* Unrecognized compiler, use defaults */
-
-#ifndef ACPI_ASM_MACROS
-
-/*
- * Calling conventions:
- *
- * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
- * ACPI_EXTERNAL_XFACE - External ACPI interfaces
- * ACPI_INTERNAL_XFACE - Internal ACPI interfaces
- * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
- */
-#define ACPI_SYSTEM_XFACE
-#define ACPI_EXTERNAL_XFACE
-#define ACPI_INTERNAL_XFACE
-#define ACPI_INTERNAL_VAR_XFACE
-
-#define ACPI_ASM_MACROS
-#define BREAKPOINT3
-#define ACPI_DISABLE_IRQS()
-#define ACPI_ENABLE_IRQS()
-#define ACPI_ACQUIRE_GLOBAL_LOCK(Glptr, acq)
-#define ACPI_RELEASE_GLOBAL_LOCK(Glptr, acq)
-
-#endif /* ACPI_ASM_MACROS */
-
-#ifdef ACPI_APPLICATION
-
-/* Don't want software interrupts within a ring3 application */
-
-#undef BREAKPOINT3
-#define BREAKPOINT3
-#endif
-
-/******************************************************************************
- *
- * Compiler-specific information is contained in the compiler-specific
- * headers.
- *
- *****************************************************************************/
#endif /* __ACENV_H__ */
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index 72553b0..e077ce6 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -64,8 +64,4 @@
*/
#define ACPI_UNUSED_VAR __attribute__ ((unused))
-#ifdef _ANSI
-#define inline
-#endif
-
#endif /* __ACGCC_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 85d5d8f..68534ef 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -108,7 +108,6 @@
#include <acpi/platform/acgcc.h>
-
#ifdef __KERNEL__
#include <acpi/actypes.h>
/*
diff --git a/include/asm-generic/cputime.h b/include/asm-generic/cputime.h
index 9a62937..5196943 100644
--- a/include/asm-generic/cputime.h
+++ b/include/asm-generic/cputime.h
@@ -4,66 +4,12 @@
#include <linux/time.h>
#include <linux/jiffies.h>
-typedef unsigned long __nocast cputime_t;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+# include <asm-generic/cputime_jiffies.h>
+#endif
-#define cputime_one_jiffy jiffies_to_cputime(1)
-#define cputime_to_jiffies(__ct) (__force unsigned long)(__ct)
-#define cputime_to_scaled(__ct) (__ct)
-#define jiffies_to_cputime(__hz) (__force cputime_t)(__hz)
-
-typedef u64 __nocast cputime64_t;
-
-#define cputime64_to_jiffies64(__ct) (__force u64)(__ct)
-#define jiffies64_to_cputime64(__jif) (__force cputime64_t)(__jif)
-
-#define nsecs_to_cputime64(__ct) \
- jiffies64_to_cputime64(nsecs_to_jiffies64(__ct))
-
-
-/*
- * Convert cputime to microseconds and back.
- */
-#define cputime_to_usecs(__ct) \
- jiffies_to_usecs(cputime_to_jiffies(__ct))
-#define usecs_to_cputime(__usec) \
- jiffies_to_cputime(usecs_to_jiffies(__usec))
-#define usecs_to_cputime64(__usec) \
- jiffies64_to_cputime64(nsecs_to_jiffies64((__usec) * 1000))
-
-/*
- * Convert cputime to seconds and back.
- */
-#define cputime_to_secs(jif) (cputime_to_jiffies(jif) / HZ)
-#define secs_to_cputime(sec) jiffies_to_cputime((sec) * HZ)
-
-/*
- * Convert cputime to timespec and back.
- */
-#define timespec_to_cputime(__val) \
- jiffies_to_cputime(timespec_to_jiffies(__val))
-#define cputime_to_timespec(__ct,__val) \
- jiffies_to_timespec(cputime_to_jiffies(__ct),__val)
-
-/*
- * Convert cputime to timeval and back.
- */
-#define timeval_to_cputime(__val) \
- jiffies_to_cputime(timeval_to_jiffies(__val))
-#define cputime_to_timeval(__ct,__val) \
- jiffies_to_timeval(cputime_to_jiffies(__ct),__val)
-
-/*
- * Convert cputime to clock and back.
- */
-#define cputime_to_clock_t(__ct) \
- jiffies_to_clock_t(cputime_to_jiffies(__ct))
-#define clock_t_to_cputime(__x) \
- jiffies_to_cputime(clock_t_to_jiffies(__x))
-
-/*
- * Convert cputime64 to clock.
- */
-#define cputime64_to_clock_t(__ct) \
- jiffies_64_to_clock_t(cputime64_to_jiffies64(__ct))
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+# include <asm-generic/cputime_nsecs.h>
+#endif
#endif
diff --git a/include/asm-generic/cputime_jiffies.h b/include/asm-generic/cputime_jiffies.h
new file mode 100644
index 0000000..272ecba
--- /dev/null
+++ b/include/asm-generic/cputime_jiffies.h
@@ -0,0 +1,72 @@
+#ifndef _ASM_GENERIC_CPUTIME_JIFFIES_H
+#define _ASM_GENERIC_CPUTIME_JIFFIES_H
+
+typedef unsigned long __nocast cputime_t;
+
+#define cputime_one_jiffy jiffies_to_cputime(1)
+#define cputime_to_jiffies(__ct) (__force unsigned long)(__ct)
+#define cputime_to_scaled(__ct) (__ct)
+#define jiffies_to_cputime(__hz) (__force cputime_t)(__hz)
+
+typedef u64 __nocast cputime64_t;
+
+#define cputime64_to_jiffies64(__ct) (__force u64)(__ct)
+#define jiffies64_to_cputime64(__jif) (__force cputime64_t)(__jif)
+
+
+/*
+ * Convert nanoseconds to cputime
+ */
+#define nsecs_to_cputime64(__nsec) \
+ jiffies64_to_cputime64(nsecs_to_jiffies64(__nsec))
+#define nsecs_to_cputime(__nsec) \
+ jiffies_to_cputime(nsecs_to_jiffies(__nsec))
+
+
+/*
+ * Convert cputime to microseconds and back.
+ */
+#define cputime_to_usecs(__ct) \
+ jiffies_to_usecs(cputime_to_jiffies(__ct))
+#define usecs_to_cputime(__usec) \
+ jiffies_to_cputime(usecs_to_jiffies(__usec))
+#define usecs_to_cputime64(__usec) \
+ jiffies64_to_cputime64(nsecs_to_jiffies64((__usec) * 1000))
+
+/*
+ * Convert cputime to seconds and back.
+ */
+#define cputime_to_secs(jif) (cputime_to_jiffies(jif) / HZ)
+#define secs_to_cputime(sec) jiffies_to_cputime((sec) * HZ)
+
+/*
+ * Convert cputime to timespec and back.
+ */
+#define timespec_to_cputime(__val) \
+ jiffies_to_cputime(timespec_to_jiffies(__val))
+#define cputime_to_timespec(__ct,__val) \
+ jiffies_to_timespec(cputime_to_jiffies(__ct),__val)
+
+/*
+ * Convert cputime to timeval and back.
+ */
+#define timeval_to_cputime(__val) \
+ jiffies_to_cputime(timeval_to_jiffies(__val))
+#define cputime_to_timeval(__ct,__val) \
+ jiffies_to_timeval(cputime_to_jiffies(__ct),__val)
+
+/*
+ * Convert cputime to clock and back.
+ */
+#define cputime_to_clock_t(__ct) \
+ jiffies_to_clock_t(cputime_to_jiffies(__ct))
+#define clock_t_to_cputime(__x) \
+ jiffies_to_cputime(clock_t_to_jiffies(__x))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct) \
+ jiffies_64_to_clock_t(cputime64_to_jiffies64(__ct))
+
+#endif
diff --git a/include/asm-generic/cputime_nsecs.h b/include/asm-generic/cputime_nsecs.h
new file mode 100644
index 0000000..b6485ca
--- /dev/null
+++ b/include/asm-generic/cputime_nsecs.h
@@ -0,0 +1,104 @@
+/*
+ * Definitions for measuring cputime in nsecs resolution.
+ *
+ * Based on <arch/ia64/include/asm/cputime.h>
+ *
+ * Copyright (C) 2007 FUJITSU LIMITED
+ * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _ASM_GENERIC_CPUTIME_NSECS_H
+#define _ASM_GENERIC_CPUTIME_NSECS_H
+
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
+
+#define cputime_one_jiffy jiffies_to_cputime(1)
+
+/*
+ * Convert cputime <-> jiffies (HZ)
+ */
+#define cputime_to_jiffies(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define cputime_to_scaled(__ct) (__ct)
+#define jiffies_to_cputime(__jif) \
+ (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif) \
+ (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
+
+
+/*
+ * Convert cputime <-> nanoseconds
+ */
+#define nsecs_to_cputime(__nsecs) ((__force u64)(__nsecs))
+
+
+/*
+ * Convert cputime <-> microseconds
+ */
+#define cputime_to_usecs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_USEC)
+#define usecs_to_cputime(__usecs) \
+ (__force cputime_t)((__usecs) * NSEC_PER_USEC)
+#define usecs_to_cputime64(__usecs) \
+ (__force cputime64_t)((__usecs) * NSEC_PER_USEC)
+
+/*
+ * Convert cputime <-> seconds
+ */
+#define cputime_to_secs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs) \
+ (__force cputime_t)((__secs) * NSEC_PER_SEC)
+
+/*
+ * Convert cputime <-> timespec (nsec)
+ */
+static inline cputime_t timespec_to_cputime(const struct timespec *val)
+{
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
+ return (__force cputime_t) ret;
+}
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
+{
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
+}
+
+/*
+ * Convert cputime <-> timeval (msec)
+ */
+static inline cputime_t timeval_to_cputime(struct timeval *val)
+{
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
+ return (__force cputime_t) ret;
+}
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
+{
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+}
+
+/*
+ * Convert cputime <-> clock (USER_HZ)
+ */
+#define cputime_to_clock_t(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x) \
+ (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct) \
+ cputime_to_clock_t((__force cputime_t)__ct)
+
+#endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index d1ea7ce..c1fe60ad 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -150,6 +150,15 @@
#endif
+#ifdef CONFIG_COMMON_CLK
+#define CLK_OF_TABLES() . = ALIGN(8); \
+ VMLINUX_SYMBOL(__clk_of_table) = .; \
+ *(__clk_of_table) \
+ *(__clk_of_table_end)
+#else
+#define CLK_OF_TABLES()
+#endif
+
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__dtb_start) = .; \
@@ -493,6 +502,7 @@
DEV_DISCARD(init.rodata) \
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.rodata) \
+ CLK_OF_TABLES() \
KERNEL_DTB()
#define INIT_TEXT \
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 3994d77..bcbdd74 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -74,9 +74,10 @@
/* Table Handlers */
-typedef int (*acpi_table_handler) (struct acpi_table_header *table);
+typedef int (*acpi_tbl_table_handler)(struct acpi_table_header *table);
-typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
+typedef int (*acpi_tbl_entry_handler)(struct acpi_subtable_header *header,
+ const unsigned long end);
#ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE
void acpi_initrd_override(void *data, size_t size);
@@ -95,10 +96,14 @@
int acpi_numa_init (void);
int acpi_table_init (void);
-int acpi_table_parse (char *id, acpi_table_handler handler);
+int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
int __init acpi_table_parse_entries(char *id, unsigned long table_size,
- int entry_id, acpi_table_entry_handler handler, unsigned int max_entries);
-int acpi_table_parse_madt (enum acpi_madt_type id, acpi_table_entry_handler handler, unsigned int max_entries);
+ int entry_id,
+ acpi_tbl_entry_handler handler,
+ unsigned int max_entries);
+int acpi_table_parse_madt(enum acpi_madt_type id,
+ acpi_tbl_entry_handler handler,
+ unsigned int max_entries);
int acpi_parse_mcfg (struct acpi_table_header *header);
void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
@@ -358,8 +363,7 @@
#if defined(CONFIG_ACPI_HOTPLUG_CPU) && \
(defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \
defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) && \
- (defined(CONFIG_ACPI_CONTAINER) || \
- defined(CONFIG_ACPI_CONTAINER_MODULE))
+ defined(CONFIG_ACPI_CONTAINER)
#define ACPI_HOTPLUG_OST
#endif
@@ -511,7 +515,7 @@
static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
#endif
-#ifdef CONFIG_ACPI_SLEEP
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_SLEEP)
int acpi_dev_suspend_late(struct device *dev);
int acpi_dev_resume_early(struct device *dev);
int acpi_subsys_prepare(struct device *dev);
@@ -526,9 +530,14 @@
#endif
#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+struct acpi_device *acpi_dev_pm_get_node(struct device *dev);
int acpi_dev_pm_attach(struct device *dev, bool power_on);
void acpi_dev_pm_detach(struct device *dev, bool power_off);
#else
+static inline struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+ return NULL;
+}
static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
{
return -ENODEV;
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 544abdb..ec10e1b 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -49,8 +49,8 @@
}
#endif
-extern void cper_print_aer(const char *prefix, int cper_severity,
- struct aer_capability_regs *aer);
+extern void cper_print_aer(const char *prefix, struct pci_dev *dev,
+ int cper_severity, struct aer_capability_regs *aer);
extern int cper_severity_to_aer(int cper_severity);
extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
int severity);
diff --git a/include/linux/async.h b/include/linux/async.h
index 7a24fe9..a2e3f18 100644
--- a/include/linux/async.h
+++ b/include/linux/async.h
@@ -19,8 +19,7 @@
typedef void (async_func_ptr) (void *data, async_cookie_t cookie);
struct async_domain {
struct list_head node;
- struct list_head domain;
- int count;
+ struct list_head pending;
unsigned registered:1;
};
@@ -29,8 +28,7 @@
*/
#define ASYNC_DOMAIN(_name) \
struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \
- .domain = LIST_HEAD_INIT(_name.domain), \
- .count = 0, \
+ .pending = LIST_HEAD_INIT(_name.pending), \
.registered = 1 }
/*
@@ -39,8 +37,7 @@
*/
#define ASYNC_DOMAIN_EXCLUSIVE(_name) \
struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \
- .domain = LIST_HEAD_INIT(_name.domain), \
- .count = 0, \
+ .pending = LIST_HEAD_INIT(_name.pending), \
.registered = 0 }
extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data);
@@ -52,4 +49,5 @@
extern void async_synchronize_cookie(async_cookie_t cookie);
extern void async_synchronize_cookie_domain(async_cookie_t cookie,
struct async_domain *domain);
+extern bool current_is_async(void);
#endif
diff --git a/include/linux/bma150.h b/include/linux/bma150.h
index 7911fda..97ade7c 100644
--- a/include/linux/bma150.h
+++ b/include/linux/bma150.h
@@ -22,6 +22,18 @@
#define BMA150_DRIVER "bma150"
+#define BMA150_RANGE_2G 0
+#define BMA150_RANGE_4G 1
+#define BMA150_RANGE_8G 2
+
+#define BMA150_BW_25HZ 0
+#define BMA150_BW_50HZ 1
+#define BMA150_BW_100HZ 2
+#define BMA150_BW_190HZ 3
+#define BMA150_BW_375HZ 4
+#define BMA150_BW_750HZ 5
+#define BMA150_BW_1500HZ 6
+
struct bma150_cfg {
bool any_motion_int; /* Set to enable any-motion interrupt */
bool hg_int; /* Set to enable high-G interrupt */
@@ -34,8 +46,8 @@
unsigned char lg_hyst; /* Low-G hysterisis */
unsigned char lg_dur; /* Low-G duration */
unsigned char lg_thres; /* Low-G threshold */
- unsigned char range; /* BMA0150_RANGE_xxx (in G) */
- unsigned char bandwidth; /* BMA0150_BW_xxx (in Hz) */
+ unsigned char range; /* one of BMA0150_RANGE_xxx */
+ unsigned char bandwidth; /* one of BMA0150_BW_xxx */
};
struct bma150_platform_data {
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 7d73905..900af59 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -203,6 +203,7 @@
/* For RCU-protected deletion */
struct rcu_head rcu_head;
+ struct work_struct free_work;
/* List of events which userspace want to receive */
struct list_head event_list;
@@ -558,6 +559,7 @@
struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos,
struct cgroup *cgroup);
+struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos);
/**
* cgroup_for_each_descendant_pre - pre-order walk of a cgroup's descendants
@@ -706,7 +708,6 @@
static inline int cgroup_init_early(void) { return 0; }
static inline int cgroup_init(void) { return 0; }
static inline void cgroup_fork(struct task_struct *p) {}
-static inline void cgroup_fork_callbacks(struct task_struct *p) {}
static inline void cgroup_post_fork(struct task_struct *p) {}
static inline void cgroup_exit(struct task_struct *p, int callbacks) {}
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 4989b8a..7f197d7 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -379,7 +379,13 @@
};
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
const char *of_clk_get_parent_name(struct device_node *np, int index);
+
void of_clk_init(const struct of_device_id *matches);
+#define CLK_OF_DECLARE(name, compat, fn) \
+ static const struct of_device_id __clk_of_table_##name \
+ __used __section(__clk_of_table) \
+ = { .compatible = compat, .data = fn };
+
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PROVIDER_H */
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
deleted file mode 100644
index e074fdd..0000000
--- a/include/linux/clk/sunxi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_CLK_SUNXI_H_
-#define __LINUX_CLK_SUNXI_H_
-
-void __init sunxi_init_clocks(void);
-
-#endif
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 8a7096f..6634652 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -161,6 +161,15 @@
extern void clockevents_suspend(void);
extern void clockevents_resume(void);
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+#ifdef CONFIG_ARCH_HAS_TICK_BROADCAST
+extern void tick_broadcast(const struct cpumask *mask);
+#else
+#define tick_broadcast NULL
+#endif
+extern int tick_receive_broadcast(void);
+#endif
+
#ifdef CONFIG_GENERIC_CLOCKEVENTS
extern void clockevents_notify(unsigned long reason, void *arg);
#else
diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h
index e24339c..b28d161 100644
--- a/include/linux/context_tracking.h
+++ b/include/linux/context_tracking.h
@@ -3,12 +3,40 @@
#ifdef CONFIG_CONTEXT_TRACKING
#include <linux/sched.h>
+#include <linux/percpu.h>
+
+struct context_tracking {
+ /*
+ * When active is false, probes are unset in order
+ * to minimize overhead: TIF flags are cleared
+ * and calls to user_enter/exit are ignored. This
+ * may be further optimized using static keys.
+ */
+ bool active;
+ enum {
+ IN_KERNEL = 0,
+ IN_USER,
+ } state;
+};
+
+DECLARE_PER_CPU(struct context_tracking, context_tracking);
+
+static inline bool context_tracking_in_user(void)
+{
+ return __this_cpu_read(context_tracking.state) == IN_USER;
+}
+
+static inline bool context_tracking_active(void)
+{
+ return __this_cpu_read(context_tracking.active);
+}
extern void user_enter(void);
extern void user_exit(void);
extern void context_tracking_task_switch(struct task_struct *prev,
struct task_struct *next);
#else
+static inline bool context_tracking_in_user(void) { return false; }
static inline void user_enter(void) { }
static inline void user_exit(void) { }
static inline void context_tracking_task_switch(struct task_struct *prev,
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index a55b88e..a22944c 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -89,11 +89,15 @@
};
struct cpufreq_policy {
- cpumask_var_t cpus; /* CPUs requiring sw coordination */
- cpumask_var_t related_cpus; /* CPUs with any coordination */
- unsigned int shared_type; /* ANY or ALL affected CPUs
+ /* CPUs sharing clock, require sw coordination */
+ cpumask_var_t cpus; /* Online CPUs only */
+ cpumask_var_t related_cpus; /* Online + Offline CPUs */
+
+ unsigned int shared_type; /* ACPI: ANY or ALL affected CPUs
should set cpufreq */
- unsigned int cpu; /* cpu nr of registered CPU */
+ unsigned int cpu; /* cpu nr of CPU managing this policy */
+ unsigned int last_cpu; /* cpu nr of previous CPU that managed
+ * this policy */
struct cpufreq_cpuinfo cpuinfo;/* see above */
unsigned int min; /* in kHz */
@@ -112,16 +116,23 @@
struct completion kobj_unregister;
};
-#define CPUFREQ_ADJUST (0)
-#define CPUFREQ_INCOMPATIBLE (1)
-#define CPUFREQ_NOTIFY (2)
-#define CPUFREQ_START (3)
+#define CPUFREQ_ADJUST (0)
+#define CPUFREQ_INCOMPATIBLE (1)
+#define CPUFREQ_NOTIFY (2)
+#define CPUFREQ_START (3)
+#define CPUFREQ_UPDATE_POLICY_CPU (4)
+/* Only for ACPI */
#define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
#define CPUFREQ_SHARED_TYPE_HW (1) /* HW does needed coordination */
#define CPUFREQ_SHARED_TYPE_ALL (2) /* All dependent CPUs should set freq */
#define CPUFREQ_SHARED_TYPE_ANY (3) /* Freq can be set from any dependent CPU*/
+static inline bool policy_is_shared(struct cpufreq_policy *policy)
+{
+ return cpumask_weight(policy->cpus) > 1;
+}
+
/******************** cpufreq transition notifiers *******************/
#define CPUFREQ_PRECHANGE (0)
@@ -173,6 +184,7 @@
struct cpufreq_governor {
char name[CPUFREQ_NAME_LEN];
+ int initialized;
int (*governor) (struct cpufreq_policy *policy,
unsigned int event);
ssize_t (*show_setspeed) (struct cpufreq_policy *policy,
@@ -308,6 +320,9 @@
static struct global_attr _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
+void cpufreq_cpu_put(struct cpufreq_policy *data);
+const char *cpufreq_get_current_driver(void);
/*********************************************************************
* CPUFREQ 2.6. INTERFACE *
@@ -397,14 +412,13 @@
/* the following 3 funtions are for cpufreq core use only */
struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
-struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
-void cpufreq_cpu_put(struct cpufreq_policy *data);
/* the following are really really optional */
extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
unsigned int cpu);
+void cpufreq_frequency_table_update_policy_cpu(struct cpufreq_policy *policy);
void cpufreq_frequency_table_put_attr(unsigned int cpu);
#endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 24cd1037..480c14d 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -32,8 +32,6 @@
****************************/
struct cpuidle_state_usage {
- void *driver_data;
-
unsigned long long disable;
unsigned long long usage;
unsigned long long time; /* in US */
@@ -62,26 +60,6 @@
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
-/**
- * cpuidle_get_statedata - retrieves private driver state data
- * @st_usage: the state usage statistics
- */
-static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
-{
- return st_usage->driver_data;
-}
-
-/**
- * cpuidle_set_statedata - stores private driver state data
- * @st_usage: the state usage statistics
- * @data: the private data
- */
-static inline void
-cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
-{
- st_usage->driver_data = data;
-}
-
struct cpuidle_device {
unsigned int registered:1;
unsigned int enabled:1;
diff --git a/include/linux/device.h b/include/linux/device.h
index 43dcda9..001f663 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -21,6 +21,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/mutex.h>
+#include <linux/pinctrl/devinfo.h>
#include <linux/pm.h>
#include <linux/atomic.h>
#include <linux/ratelimit.h>
@@ -620,6 +621,8 @@
* @pm_domain: Provide callbacks that are executed during system suspend,
* hibernation, system resume and during runtime PM transitions
* along with subsystem-level and driver-level callbacks.
+ * @pins: For device pin management.
+ * See Documentation/pinctrl.txt for details.
* @numa_node: NUMA node this device is close to.
* @dma_mask: Dma mask (if dma'ble device).
* @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
@@ -672,6 +675,10 @@
struct dev_pm_info power;
struct dev_pm_domain *pm_domain;
+#ifdef CONFIG_PINCTRL
+ struct dev_pin_info *pins;
+#endif
+
#ifdef CONFIG_NUMA
int numa_node; /* NUMA node this device is close to */
#endif
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index c03af76..1866206 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -138,6 +138,7 @@
/*
* io scheduler registration
*/
+extern void __init load_default_elevator_module(void);
extern int elv_register(struct elevator_type *);
extern void elv_unregister(struct elevator_type *);
@@ -206,5 +207,9 @@
INIT_LIST_HEAD(&(rq)->csd.list); \
} while (0)
+#else /* CONFIG_BLOCK */
+
+static inline void load_default_elevator_module(void) { }
+
#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index e4238ce..e70df40 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -13,6 +13,11 @@
extern bool pm_nosig_freezing; /* PM nosig freezing in effect */
/*
+ * Timeout for stopping processes
+ */
+extern unsigned int freeze_timeout_msecs;
+
+/*
* Check if a process has been frozen
*/
static inline bool frozen(struct task_struct *p)
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 92691d8..e5ca8ef 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -74,7 +74,7 @@
* SAVE_REGS - The ftrace_ops wants regs saved at each function called
* and passed to the callback. If this flag is set, but the
* architecture does not support passing regs
- * (ARCH_SUPPORTS_FTRACE_SAVE_REGS is not defined), then the
+ * (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
* ftrace_ops will fail to register, unless the next flag
* is set.
* SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
@@ -418,7 +418,7 @@
#endif
#ifndef FTRACE_REGS_ADDR
-#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
#else
# define FTRACE_REGS_ADDR FTRACE_ADDR
@@ -480,7 +480,7 @@
*/
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
-#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
/**
* ftrace_modify_call - convert from one addr to another (no nop)
* @rec: the mcount call site record
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index a3d4895..13a54d0 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -49,7 +49,6 @@
unsigned char flags;
unsigned char preempt_count;
int pid;
- int padding;
};
#define FTRACE_MAX_EVENT \
@@ -84,6 +83,9 @@
long idx;
cpumask_var_t started;
+
+ /* it's true when current open file is snapshot */
+ bool snapshot;
};
enum trace_iter_flags {
@@ -272,7 +274,7 @@
extern int trace_add_event_call(struct ftrace_event_call *call);
extern void trace_remove_event_call(struct ftrace_event_call *call);
-#define is_signed_type(type) (((type)(-1)) < 0)
+#define is_signed_type(type) (((type)(-1)) < (type)0)
int trace_set_clr_event(const char *system, const char *event, int set);
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 624ef3f..29eb805 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -153,7 +153,7 @@
*/
#define __irq_enter() \
do { \
- vtime_account_irq_enter(current); \
+ account_irq_enter_time(current); \
add_preempt_count(HARDIRQ_OFFSET); \
trace_hardirq_enter(); \
} while (0)
@@ -169,7 +169,7 @@
#define __irq_exit() \
do { \
trace_hardirq_exit(); \
- vtime_account_irq_exit(current); \
+ account_irq_exit_time(current); \
sub_preempt_count(HARDIRQ_OFFSET); \
} while (0)
@@ -180,10 +180,10 @@
#define nmi_enter() \
do { \
+ lockdep_off(); \
ftrace_nmi_enter(); \
BUG_ON(in_nmi()); \
add_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET); \
- lockdep_off(); \
rcu_nmi_enter(); \
trace_hardirq_enter(); \
} while (0)
@@ -192,10 +192,10 @@
do { \
trace_hardirq_exit(); \
rcu_nmi_exit(); \
- lockdep_on(); \
BUG_ON(!in_nmi()); \
sub_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET); \
ftrace_nmi_exit(); \
+ lockdep_on(); \
} while (0)
#endif /* LINUX_HARDIRQ_H */
diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
index 82b29ae..b2514f7 100644
--- a/include/linux/hwmon.h
+++ b/include/linux/hwmon.h
@@ -20,16 +20,4 @@
void hwmon_device_unregister(struct device *dev);
-/* Scale user input to sensible values */
-static inline int SENSORS_LIMIT(long value, long low, long high)
-{
- if (value < low)
- return low;
- else if (value > high)
- return high;
- else
- return value;
-}
-
#endif
-
diff --git a/include/linux/init.h b/include/linux/init.h
index 10ed4f4..8618147 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -153,6 +153,7 @@
/* used by init/main.c */
void setup_arch(char **);
void prepare_namespace(void);
+void __init load_default_modules(void);
extern void (*late_time_init)(void);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 6d087c5..5cd0f09 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -10,7 +10,9 @@
#include <linux/pid_namespace.h>
#include <linux/user_namespace.h>
#include <linux/securebits.h>
+#include <linux/seqlock.h>
#include <net/net_namespace.h>
+#include <linux/sched/rt.h>
#ifdef CONFIG_SMP
# define INIT_PUSHABLE_TASKS(tsk) \
@@ -141,6 +143,15 @@
# define INIT_PERF_EVENTS(tsk)
#endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+# define INIT_VTIME(tsk) \
+ .vtime_seqlock = __SEQLOCK_UNLOCKED(tsk.vtime_seqlock), \
+ .vtime_snap = 0, \
+ .vtime_snap_whence = VTIME_SYS,
+#else
+# define INIT_VTIME(tsk)
+#endif
+
#define INIT_TASK_COMM "swapper"
/*
@@ -210,6 +221,7 @@
INIT_TRACE_RECURSION \
INIT_TASK_RCU_PREEMPT(tsk) \
INIT_CPUSET_SEQ \
+ INIT_VTIME(tsk) \
}
diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h
index 57e01a7..010d981 100644
--- a/include/linux/input/adxl34x.h
+++ b/include/linux/input/adxl34x.h
@@ -13,6 +13,8 @@
#ifndef __LINUX_INPUT_ADXL34X_H__
#define __LINUX_INPUT_ADXL34X_H__
+#include <linux/input.h>
+
struct adxl34x_platform_data {
/*
diff --git a/include/linux/input/tegra_kbc.h b/include/linux/input/tegra_kbc.h
deleted file mode 100644
index a130256..0000000
--- a/include/linux/input/tegra_kbc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Platform definitions for tegra-kbc keyboard input driver
- *
- * Copyright (c) 2010-2011, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_TEGRA_KBC_H
-#define ASMARM_ARCH_TEGRA_KBC_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define KBC_MAX_GPIO 24
-#define KBC_MAX_KPENT 8
-
-#define KBC_MAX_ROW 16
-#define KBC_MAX_COL 8
-#define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL)
-
-enum tegra_pin_type {
- PIN_CFG_IGNORE,
- PIN_CFG_COL,
- PIN_CFG_ROW,
-};
-
-struct tegra_kbc_pin_cfg {
- enum tegra_pin_type type;
- unsigned char num;
-};
-
-struct tegra_kbc_wake_key {
- u8 row:4;
- u8 col:4;
-};
-
-struct tegra_kbc_platform_data {
- unsigned int debounce_cnt;
- unsigned int repeat_cnt;
-
- struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
- const struct matrix_keymap_data *keymap_data;
-
- u32 wakeup_key;
- bool wakeup;
- bool use_fn_map;
- bool use_ghost_filter;
-};
-#endif
diff --git a/include/linux/irq.h b/include/linux/irq.h
index fdf2c4a..bc4e066 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -509,8 +509,11 @@
/* Handle dynamic irq creation and destruction */
extern unsigned int create_irq_nr(unsigned int irq_want, int node);
+extern unsigned int __create_irqs(unsigned int from, unsigned int count,
+ int node);
extern int create_irq(void);
extern void destroy_irq(unsigned int irq);
+extern void destroy_irqs(unsigned int irq, unsigned int count);
/*
* Dynamic irq helper functions. Obsolete. Use irq_alloc_desc* and
@@ -528,6 +531,8 @@
extern int irq_set_chip_data(unsigned int irq, void *data);
extern int irq_set_irq_type(unsigned int irq, unsigned int type);
extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
+extern int irq_set_msi_desc_off(unsigned int irq_base, unsigned int irq_offset,
+ struct msi_desc *entry);
extern struct irq_data *irq_get_irq_data(unsigned int irq);
static inline struct irq_chip *irq_get_chip(unsigned int irq)
@@ -590,6 +595,9 @@
#define irq_alloc_desc_from(from, node) \
irq_alloc_descs(-1, from, 1, node)
+#define irq_alloc_descs_from(from, cnt, node) \
+ irq_alloc_descs(-1, from, cnt, node)
+
void irq_free_descs(unsigned int irq, unsigned int cnt);
int irq_reserve_irqs(unsigned int from, unsigned int cnt);
diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h
index 6a9e8f5..f5dbce5 100644
--- a/include/linux/irq_work.h
+++ b/include/linux/irq_work.h
@@ -3,6 +3,20 @@
#include <linux/llist.h>
+/*
+ * An entry can be in one of four states:
+ *
+ * free NULL, 0 -> {claimed} : free to be used
+ * claimed NULL, 3 -> {pending} : claimed to be enqueued
+ * pending next, 3 -> {busy} : queued, pending callback
+ * busy NULL, 2 -> {free, claimed} : callback in progress, can be claimed
+ */
+
+#define IRQ_WORK_PENDING 1UL
+#define IRQ_WORK_BUSY 2UL
+#define IRQ_WORK_FLAGS 3UL
+#define IRQ_WORK_LAZY 4UL /* Doesn't want IPI, wait for tick */
+
struct irq_work {
unsigned long flags;
struct llist_node llnode;
@@ -16,8 +30,14 @@
work->func = func;
}
-bool irq_work_queue(struct irq_work *work);
+void irq_work_queue(struct irq_work *work);
void irq_work_run(void);
void irq_work_sync(struct irq_work *work);
+#ifdef CONFIG_IRQ_WORK
+bool irq_work_needs_cpu(void);
+#else
+static bool irq_work_needs_cpu(void) { return false; }
+#endif
+
#endif /* _LINUX_IRQ_WORK_H */
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 66b7078..ed5f6ed 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -127,7 +127,7 @@
extern void account_steal_time(cputime_t);
extern void account_idle_time(cputime_t);
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
static inline void account_process_tick(struct task_struct *tsk, int user)
{
vtime_account_user(tsk);
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 23755ba..4b6ef4d 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -49,16 +49,6 @@
#define KPROBE_REENTER 0x00000004
#define KPROBE_HIT_SSDONE 0x00000008
-/*
- * If function tracer is enabled and the arch supports full
- * passing of pt_regs to function tracing, then kprobes can
- * optimize on top of function tracing.
- */
-#if defined(CONFIG_FUNCTION_TRACER) && defined(ARCH_SUPPORTS_FTRACE_SAVE_REGS) \
- && defined(ARCH_SUPPORTS_KPROBES_ON_FTRACE)
-# define KPROBES_CAN_USE_FTRACE
-#endif
-
/* Attach to insert probes on any functions which should be ignored*/
#define __kprobes __attribute__((__section__(".kprobes.text")))
@@ -316,7 +306,7 @@
#endif
#endif /* CONFIG_OPTPROBES */
-#ifdef KPROBES_CAN_USE_FTRACE
+#ifdef CONFIG_KPROBES_ON_FTRACE
extern void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *ops, struct pt_regs *regs);
extern int arch_prepare_kprobe_ftrace(struct kprobe *p);
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 2c497ab..b7996a7 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -22,6 +22,7 @@
#include <linux/rcupdate.h>
#include <linux/ratelimit.h>
#include <linux/err.h>
+#include <linux/irqflags.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -740,15 +741,52 @@
}
#endif /* CONFIG_IOMMU_API */
-static inline void kvm_guest_enter(void)
+static inline void __guest_enter(void)
{
- BUG_ON(preemptible());
/*
* This is running in ioctl context so we can avoid
* the call to vtime_account() with its unnecessary idle check.
*/
- vtime_account_system_irqsafe(current);
+ vtime_account_system(current);
current->flags |= PF_VCPU;
+}
+
+static inline void __guest_exit(void)
+{
+ /*
+ * This is running in ioctl context so we can avoid
+ * the call to vtime_account() with its unnecessary idle check.
+ */
+ vtime_account_system(current);
+ current->flags &= ~PF_VCPU;
+}
+
+#ifdef CONFIG_CONTEXT_TRACKING
+extern void guest_enter(void);
+extern void guest_exit(void);
+
+#else /* !CONFIG_CONTEXT_TRACKING */
+static inline void guest_enter(void)
+{
+ __guest_enter();
+}
+
+static inline void guest_exit(void)
+{
+ __guest_exit();
+}
+#endif /* !CONFIG_CONTEXT_TRACKING */
+
+static inline void kvm_guest_enter(void)
+{
+ unsigned long flags;
+
+ BUG_ON(preemptible());
+
+ local_irq_save(flags);
+ guest_enter();
+ local_irq_restore(flags);
+
/* KVM does not hold any references to rcu protected data when it
* switches CPU into a guest mode. In fact switching to a guest mode
* is very similar to exiting to userspase from rcu point of view. In
@@ -761,12 +799,11 @@
static inline void kvm_guest_exit(void)
{
- /*
- * This is running in ioctl context so we can avoid
- * the call to vtime_account() with its unnecessary idle check.
- */
- vtime_account_system_irqsafe(current);
- current->flags &= ~PF_VCPU;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ guest_exit();
+ local_irq_restore(flags);
}
/*
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
index 79603a6..4ad06e8 100644
--- a/include/linux/libps2.h
+++ b/include/linux/libps2.h
@@ -36,7 +36,7 @@
wait_queue_head_t wait;
unsigned long flags;
- unsigned char cmdbuf[6];
+ unsigned char cmdbuf[8];
unsigned char cmdcnt;
unsigned char nak;
};
diff --git a/include/linux/mailbox.h b/include/linux/mailbox.h
new file mode 100644
index 0000000..5161f63
--- /dev/null
+++ b/include/linux/mailbox.h
@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+int pl320_ipc_transmit(u32 *data);
+int pl320_ipc_register_notifier(struct notifier_block *nb);
+int pl320_ipc_unregister_notifier(struct notifier_block *nb);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e53dcfe..80e3b86 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -131,7 +131,7 @@
* @nominal_voltage: Nominal voltage of the battery in mV
* @termination_vol: max voltage upto which battery can be charged
* @termination_curr battery charging termination current in mA
- * @recharge_vol battery voltage limit that will trigger a new
+ * @recharge_cap battery capacity limit that will trigger a new
* full charging cycle in the case where maintenan-
* -ce charging has been disabled
* @normal_cur_lvl: charger current in normal state in mA
@@ -160,7 +160,7 @@
int nominal_voltage;
int termination_vol;
int termination_curr;
- int recharge_vol;
+ int recharge_cap;
int normal_cur_lvl;
int normal_vol_lvl;
int maint_a_cur_lvl;
@@ -224,6 +224,7 @@
* @bkup_bat_v voltage which we charge the backup battery with
* @bkup_bat_i current which we charge the backup battery with
* @no_maintenance indicates that maintenance charging is disabled
+ * @capacity_scaling indicates whether capacity scaling is to be used
* @abx500_adc_therm placement of thermistor, batctrl or battemp adc
* @chg_unknown_bat flag to enable charging of unknown batteries
* @enable_overshoot flag to enable VBAT overshoot control
@@ -253,7 +254,11 @@
int usb_safety_tmr_h;
int bkup_bat_v;
int bkup_bat_i;
+ bool autopower_cfg;
+ bool ac_enabled;
+ bool usb_enabled;
bool no_maintenance;
+ bool capacity_scaling;
bool chg_unknown_bat;
bool enable_overshoot;
bool auto_trig;
@@ -277,9 +282,9 @@
NTC_INTERNAL,
};
-int bmdevs_of_probe(struct device *dev,
- struct device_node *np,
- struct abx500_bm_data **battery);
+int ab8500_bm_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data *bm);
int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 value);
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 9bd037d..8d35bfe 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -23,6 +23,7 @@
* Bank : 0x5
*/
#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_LINK1_STAT_REG 0x94
/*
* Charger / status register offfsets
@@ -225,6 +226,8 @@
/* BatCtrl Current Source Constants */
#define BAT_CTRL_7U_ENA 0x01
#define BAT_CTRL_20U_ENA 0x02
+#define BAT_CTRL_18U_ENA 0x01
+#define BAT_CTRL_16U_ENA 0x02
#define BAT_CTRL_CMP_ENA 0x04
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
#define BAT_CTRL_PULL_UP_ENA 0x10
@@ -355,6 +358,7 @@
* @bkup_bat_v voltage which we charge the backup battery with
* @bkup_bat_i current which we charge the backup battery with
* @no_maintenance indicates that maintenance charging is disabled
+ * @capacity_scaling indicates whether capacity scaling is to be used
* @adc_therm placement of thermistor, batctrl or battemp adc
* @chg_unknown_bat flag to enable charging of unknown batteries
* @enable_overshoot flag to enable VBAT overshoot control
@@ -383,6 +387,7 @@
int bkup_bat_v;
int bkup_bat_i;
bool no_maintenance;
+ bool capacity_scaling;
bool chg_unknown_bat;
bool enable_overshoot;
enum abx500_adc_therm adc_therm;
@@ -399,26 +404,6 @@
const struct ab8500_fg_parameters *fg_params;
};
-struct ab8500_charger_platform_data {
- char **supplied_to;
- size_t num_supplicants;
- bool autopower_cfg;
-};
-
-struct ab8500_btemp_platform_data {
- char **supplied_to;
- size_t num_supplicants;
-};
-
-struct ab8500_fg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
-};
-
-struct ab8500_chargalg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
-};
struct ab8500_btemp;
struct ab8500_gpadc;
struct ab8500_fg;
@@ -434,20 +419,10 @@
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di);
int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
#else
static struct abx500_bm_data ab8500_bm_data;
-
-static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
-{
- return -ENODEV;
-}
-
-static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
-{
- return -ENODEV;
-}
-
#endif
#endif /* _AB8500_BM_H */
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
index 2387c20..172b2f2 100644
--- a/include/linux/mfd/abx500/ab8500-gpio.h
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -14,10 +14,20 @@
* registers.
*/
-struct ab8500_gpio_platform_data {
+struct abx500_gpio_platform_data {
int gpio_base;
- u32 irq_base;
- u8 config_reg[8];
+};
+
+enum abx500_gpio_pull_updown {
+ ABX500_GPIO_PULL_DOWN = 0x0,
+ ABX500_GPIO_PULL_NONE = 0x1,
+ ABX500_GPIO_PULL_UP = 0x3,
+};
+
+enum abx500_gpio_vinsel {
+ ABX500_GPIO_VINSEL_VBAT = 0x0,
+ ABX500_GPIO_VINSEL_VIN_1V8 = 0x1,
+ ABX500_GPIO_VINSEL_VDD_BIF = 0x2,
};
#endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 1cb5698..fc05344 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -24,7 +24,7 @@
AB8500_VERSION_AB8500 = 0x0,
AB8500_VERSION_AB8505 = 0x1,
AB8500_VERSION_AB9540 = 0x2,
- AB8500_VERSION_AB8540 = 0x3,
+ AB8500_VERSION_AB8540 = 0x4,
AB8500_VERSION_UNDEFINED,
};
@@ -32,6 +32,7 @@
#define AB8500_CUTEARLY 0x00
#define AB8500_CUT1P0 0x10
#define AB8500_CUT1P1 0x11
+#define AB8500_CUT1P2 0x12 /* Only valid for AB8540 */
#define AB8500_CUT2P0 0x20
#define AB8500_CUT3P0 0x30
#define AB8500_CUT3P3 0x33
@@ -39,6 +40,7 @@
/*
* AB8500 bank addresses
*/
+#define AB8500_M_FSM_RANK 0x0
#define AB8500_SYS_CTRL1_BLOCK 0x1
#define AB8500_SYS_CTRL2_BLOCK 0x2
#define AB8500_REGU_CTRL1 0x3
@@ -58,6 +60,7 @@
#define AB8500_DEVELOPMENT 0x11
#define AB8500_DEBUG 0x12
#define AB8500_PROD_TEST 0x13
+#define AB8500_STE_TEST 0x14
#define AB8500_OTP_EMUL 0x15
/*
@@ -65,11 +68,11 @@
* Values used to index into array ab8500_irq_regoffset[] defined in
* drivers/mdf/ab8500-core.c
*/
-/* Definitions for AB8500 and AB9540 */
+/* Definitions for AB8500, AB9540 and AB8540 */
/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */
-#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */
-#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540/8540 */
+#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540/8540 */
#define AB8500_INT_TEMP_WARM 3
#define AB8500_INT_PON_KEY2DB_F 4
#define AB8500_INT_PON_KEY2DB_R 5
@@ -77,18 +80,19 @@
#define AB8500_INT_PON_KEY1DB_R 7
/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
#define AB8500_INT_BATT_OVV 8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */
-#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */
+#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505/8540 */
+#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505/8540 */
#define AB8500_INT_VBUS_DET_F 14
#define AB8500_INT_VBUS_DET_R 15
/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
#define AB8500_INT_VBUS_CH_DROP_END 16
#define AB8500_INT_RTC_60S 17
#define AB8500_INT_RTC_ALARM 18
+#define AB8540_INT_BIF_INT 19
#define AB8500_INT_BAT_CTRL_INDB 20
#define AB8500_INT_CH_WD_EXP 21
#define AB8500_INT_VBUS_OVV 22
-#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540/8540 */
/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
#define AB8500_INT_CCN_CONV_ACC 24
#define AB8500_INT_INT_AUD 25
@@ -99,7 +103,7 @@
#define AB8500_INT_BUP_CHG_NOT_OK 30
#define AB8500_INT_BUP_CHG_OK 31
/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
-#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */
+#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505/8540 */
#define AB8500_INT_ACC_DETECT_1DB_F 33
#define AB8500_INT_ACC_DETECT_1DB_R 34
#define AB8500_INT_ACC_DETECT_22DB_F 35
@@ -108,23 +112,23 @@
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
-#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */
-#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */
-#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */
-#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */
-#define AB8500_INT_GPIO10R 44
-#define AB8500_INT_GPIO11R 45
-#define AB8500_INT_GPIO12R 46 /* not 8505 */
-#define AB8500_INT_GPIO13R 47
+#define AB8500_INT_GPIO6R 40 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO7R 41 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO8R 42 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO9R 43 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO10R 44 /* not 8540 */
+#define AB8500_INT_GPIO11R 45 /* not 8540 */
+#define AB8500_INT_GPIO12R 46 /* not 8505/8540 */
+#define AB8500_INT_GPIO13R 47 /* not 8540 */
/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
-#define AB8500_INT_GPIO24R 48 /* not 8505 */
-#define AB8500_INT_GPIO25R 49 /* not 8505 */
-#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */
-#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */
-#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */
-#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */
-#define AB8500_INT_GPIO40R 54
-#define AB8500_INT_GPIO41R 55
+#define AB8500_INT_GPIO24R 48 /* not 8505/8540 */
+#define AB8500_INT_GPIO25R 49 /* not 8505/8540 */
+#define AB8500_INT_GPIO36R 50 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37R 51 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38R 52 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39R 53 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40R 54 /* not 8540 */
+#define AB8500_INT_GPIO41R 55 /* not 8540 */
/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */
#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */
@@ -135,14 +139,14 @@
#define AB8500_INT_GPIO12F 62 /* not 8505 */
#define AB8500_INT_GPIO13F 63
/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
-#define AB8500_INT_GPIO24F 64 /* not 8505 */
-#define AB8500_INT_GPIO25F 65 /* not 8505 */
-#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */
-#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */
-#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */
-#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */
-#define AB8500_INT_GPIO40F 70
-#define AB8500_INT_GPIO41F 71
+#define AB8500_INT_GPIO24F 64 /* not 8505/8540 */
+#define AB8500_INT_GPIO25F 65 /* not 8505/8540 */
+#define AB8500_INT_GPIO36F 66 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37F 67 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38F 68 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39F 69 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40F 70 /* not 8540 */
+#define AB8500_INT_GPIO41F 71 /* not 8540 */
/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
#define AB8500_INT_ADP_SOURCE_ERROR 72
#define AB8500_INT_ADP_SINK_ERROR 73
@@ -160,42 +164,44 @@
#define AB8500_INT_SRP_DETECT 88
#define AB8500_INT_USB_CHARGER_NOT_OKR 89
#define AB8500_INT_ID_WAKEUP_R 90
+#define AB8500_INT_ID_DET_PLUGR 91 /* 8505/9540 cut2.0 */
#define AB8500_INT_ID_DET_R1R 92
#define AB8500_INT_ID_DET_R2R 93
#define AB8500_INT_ID_DET_R3R 94
#define AB8500_INT_ID_DET_R4R 95
/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
-#define AB8500_INT_ID_WAKEUP_F 96
-#define AB8500_INT_ID_DET_R1F 98
-#define AB8500_INT_ID_DET_R2F 99
-#define AB8500_INT_ID_DET_R3F 100
-#define AB8500_INT_ID_DET_R4F 101
-#define AB8500_INT_CHAUTORESTARTAFTSEC 102
+#define AB8500_INT_ID_WAKEUP_F 96 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_PLUGF 97 /* 8505/9540 cut2.0 */
+#define AB8500_INT_ID_DET_R1F 98 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R2F 99 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R3F 100 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R4F 101 /* not 8505/9540 */
+#define AB8500_INT_CHAUTORESTARTAFTSEC 102 /* not 8505/9540 */
#define AB8500_INT_CHSTOPBYSEC 103
/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
#define AB8500_INT_USB_CH_TH_PROT_F 104
-#define AB8500_INT_USB_CH_TH_PROT_R 105
+#define AB8500_INT_USB_CH_TH_PROT_R 105
#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */
#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */
#define AB8500_INT_CHCURLIMNOHSCHIRP 109
#define AB8500_INT_CHCURLIMHSCHIRP 110
#define AB8500_INT_XTAL32K_KO 111
-/* Definitions for AB9540 */
+/* Definitions for AB9540 / AB8505 */
/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
-#define AB9540_INT_GPIO50R 113
-#define AB9540_INT_GPIO51R 114 /* not 8505 */
-#define AB9540_INT_GPIO52R 115
-#define AB9540_INT_GPIO53R 116
-#define AB9540_INT_GPIO54R 117 /* not 8505 */
+#define AB9540_INT_GPIO50R 113 /* not 8540 */
+#define AB9540_INT_GPIO51R 114 /* not 8505/8540 */
+#define AB9540_INT_GPIO52R 115 /* not 8540 */
+#define AB9540_INT_GPIO53R 116 /* not 8540 */
+#define AB9540_INT_GPIO54R 117 /* not 8505/8540 */
#define AB9540_INT_IEXT_CH_RF_BFN_R 118
-#define AB9540_INT_IEXT_CH_RF_BFN_F 119
/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
-#define AB9540_INT_GPIO50F 121
-#define AB9540_INT_GPIO51F 122 /* not 8505 */
-#define AB9540_INT_GPIO52F 123
-#define AB9540_INT_GPIO53F 124
-#define AB9540_INT_GPIO54F 125 /* not 8505 */
+#define AB9540_INT_GPIO50F 121 /* not 8540 */
+#define AB9540_INT_GPIO51F 122 /* not 8505/8540 */
+#define AB9540_INT_GPIO52F 123 /* not 8540 */
+#define AB9540_INT_GPIO53F 124 /* not 8540 */
+#define AB9540_INT_GPIO54F 125 /* not 8505/8540 */
+#define AB9540_INT_IEXT_CH_RF_BFN_F 126
/* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */
#define AB8505_INT_KEYSTUCK 128
#define AB8505_INT_IKR 129
@@ -204,6 +210,87 @@
#define AB8505_INT_KEYDEGLITCH 132
#define AB8505_INT_MODPWRSTATUSF 134
#define AB8505_INT_MODPWRSTATUSR 135
+/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */
+#define AB8500_INT_HOOK_DET_NEG_F 138
+#define AB8500_INT_HOOK_DET_NEG_R 139
+#define AB8500_INT_HOOK_DET_POS_F 140
+#define AB8500_INT_HOOK_DET_POS_R 141
+#define AB8500_INT_PLUG_DET_COMP_F 142
+#define AB8500_INT_PLUG_DET_COMP_R 143
+/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */
+#define AB8505_INT_COLL 144
+#define AB8505_INT_RESERR 145
+#define AB8505_INT_FRAERR 146
+#define AB8505_INT_COMERR 147
+#define AB8505_INT_SPDSET 148
+#define AB8505_INT_DSENT 149
+#define AB8505_INT_DREC 150
+#define AB8505_INT_ACC_INT 151
+/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */
+#define AB8505_INT_NOPINT 152
+/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */
+#define AB8540_INT_IDPLUGDETCOMPF 160
+#define AB8540_INT_IDPLUGDETCOMPR 161
+#define AB8540_INT_FMDETCOMPLOF 162
+#define AB8540_INT_FMDETCOMPLOR 163
+#define AB8540_INT_FMDETCOMPHIF 164
+#define AB8540_INT_FMDETCOMPHIR 165
+#define AB8540_INT_ID5VDETCOMPF 166
+#define AB8540_INT_ID5VDETCOMPR 167
+/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */
+#define AB8540_INT_GPIO43F 168
+#define AB8540_INT_GPIO43R 169
+#define AB8540_INT_GPIO44F 170
+#define AB8540_INT_GPIO44R 171
+#define AB8540_INT_KEYPOSDETCOMPF 172
+#define AB8540_INT_KEYPOSDETCOMPR 173
+#define AB8540_INT_KEYNEGDETCOMPF 174
+#define AB8540_INT_KEYNEGDETCOMPR 175
+/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */
+#define AB8540_INT_GPIO1VBATF 176
+#define AB8540_INT_GPIO1VBATR 177
+#define AB8540_INT_GPIO2VBATF 178
+#define AB8540_INT_GPIO2VBATR 179
+#define AB8540_INT_GPIO3VBATF 180
+#define AB8540_INT_GPIO3VBATR 181
+#define AB8540_INT_GPIO4VBATF 182
+#define AB8540_INT_GPIO4VBATR 183
+/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */
+#define AB8540_INT_SYSCLKREQ2F 184
+#define AB8540_INT_SYSCLKREQ2R 185
+#define AB8540_INT_SYSCLKREQ3F 186
+#define AB8540_INT_SYSCLKREQ3R 187
+#define AB8540_INT_SYSCLKREQ4F 188
+#define AB8540_INT_SYSCLKREQ4R 189
+#define AB8540_INT_SYSCLKREQ5F 190
+#define AB8540_INT_SYSCLKREQ5R 191
+/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */
+#define AB8540_INT_PWMOUT1F 192
+#define AB8540_INT_PWMOUT1R 193
+#define AB8540_INT_PWMCTRL0F 194
+#define AB8540_INT_PWMCTRL0R 195
+#define AB8540_INT_PWMCTRL1F 196
+#define AB8540_INT_PWMCTRL1R 197
+#define AB8540_INT_SYSCLKREQ6F 198
+#define AB8540_INT_SYSCLKREQ6R 199
+/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */
+#define AB8540_INT_PWMEXTVIBRA1F 200
+#define AB8540_INT_PWMEXTVIBRA1R 201
+#define AB8540_INT_PWMEXTVIBRA2F 202
+#define AB8540_INT_PWMEXTVIBRA2R 203
+#define AB8540_INT_PWMOUT2F 204
+#define AB8540_INT_PWMOUT2R 205
+#define AB8540_INT_PWMOUT3F 206
+#define AB8540_INT_PWMOUT3R 207
+/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */
+#define AB8540_INT_ADDATA2F 208
+#define AB8540_INT_ADDATA2R 209
+#define AB8540_INT_DADATA2F 210
+#define AB8540_INT_DADATA2R 211
+#define AB8540_INT_FSYNC2F 212
+#define AB8540_INT_FSYNC2R 213
+#define AB8540_INT_BITCLK2F 214
+#define AB8540_INT_BITCLK2R 215
/*
* AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
@@ -213,13 +300,24 @@
* which is larger.
*/
#define AB8500_NR_IRQS 112
-#define AB8505_NR_IRQS 136
-#define AB9540_NR_IRQS 136
+#define AB8505_NR_IRQS 153
+#define AB9540_NR_IRQS 153
+#define AB8540_NR_IRQS 216
/* This is set to the roof of any AB8500 chip variant IRQ counts */
-#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS
+#define AB8500_MAX_NR_IRQS AB8540_NR_IRQS
#define AB8500_NUM_IRQ_REGS 14
-#define AB9540_NUM_IRQ_REGS 17
+#define AB9540_NUM_IRQ_REGS 20
+#define AB8540_NUM_IRQ_REGS 27
+
+/* Turn On Status Event */
+#define AB8500_POR_ON_VBAT 0x01
+#define AB8500_POW_KEY_1_ON 0x02
+#define AB8500_POW_KEY_2_ON 0x04
+#define AB8500_RTC_ALARM 0x08
+#define AB8500_MAIN_CH_DET 0x10
+#define AB8500_VBUS_DET 0x20
+#define AB8500_USB_ID_DET 0x40
/**
* struct ab8500 - ab8500 internal structure
@@ -287,7 +385,7 @@
struct ab8500_regulator_reg_init *regulator_reg_init;
int num_regulator;
struct regulator_init_data *regulator;
- struct ab8500_gpio_platform_data *gpio;
+ struct abx500_gpio_platform_data *gpio;
struct ab8500_codec_platform_data *codec;
};
@@ -335,10 +433,79 @@
return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
}
+static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3));
+}
+
/* exclude also ab8505, ab9540... */
static inline int is_ab8500_2p0(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
}
+static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab8505_2p0(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab9540_2p0(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+/*
+ * Be careful, the marketing name for this chip is 2.1
+ * but the value read from the chip is 3.0 (0x30)
+ */
+static inline int is_ab9540_3p0(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0));
+}
+
+static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0);
+}
+
+static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1);
+}
+
+static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2);
+}
+
+static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0);
+}
+
+static inline int is_ab8540_2p0(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0);
+}
+
+static inline int is_ab8505_2p0_earlier(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
index 9b07725..d43ac0f 100644
--- a/include/linux/mfd/abx500/ux500_chargalg.h
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -27,12 +27,17 @@
* @ops ux500 charger operations
* @max_out_volt maximum output charger voltage in mV
* @max_out_curr maximum output charger current in mA
+ * @enabled indicates if this charger is used or not
+ * @external external charger unit (pm2xxx)
*/
struct ux500_charger {
struct power_supply psy;
struct ux500_charger_ops ops;
int max_out_volt;
int max_out_curr;
+ int wdt_refresh;
+ bool enabled;
+ bool external;
};
#endif
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index b50c38f..f0f4de3 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -26,6 +26,7 @@
/**
* struct sec_pmic_dev - s5m87xx master device for sub-drivers
* @dev: master device of the chip (can be used to access platform data)
+ * @pdata: pointer to private data used to pass platform data to child
* @i2c: i2c client private data for regulator
* @rtc: i2c client private data for rtc
* @iolock: mutex for serializing io access
@@ -39,6 +40,7 @@
*/
struct sec_pmic_dev {
struct device *dev;
+ struct sec_platform_data *pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct i2c_client *rtc;
@@ -82,11 +84,11 @@
int buck_gpios[3];
int buck_ds[3];
- int buck2_voltage[8];
+ unsigned int buck2_voltage[8];
bool buck2_gpiodvs;
- int buck3_voltage[8];
+ unsigned int buck3_voltage[8];
bool buck3_gpiodvs;
- int buck4_voltage[8];
+ unsigned int buck4_voltage[8];
bool buck4_gpiodvs;
int buck_set1;
@@ -127,6 +129,7 @@
struct sec_regulator_data {
int id;
struct regulator_init_data *initdata;
+ struct device_node *reg_node;
};
/*
@@ -136,7 +139,7 @@
*/
struct sec_opmode_data {
int id;
- int mode;
+ unsigned int mode;
};
/*
diff --git a/include/linux/of.h b/include/linux/of.h
index 5ebcc5c..a0f1292 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -92,7 +92,7 @@
extern struct device_node *of_allnodes;
extern struct device_node *of_chosen;
extern struct device_node *of_aliases;
-extern rwlock_t devtree_lock;
+extern raw_spinlock_t devtree_lock;
static inline bool of_have_populated_dt(void)
{
@@ -160,7 +160,7 @@
#define OF_BAD_ADDR ((u64)-1)
-static inline const char* of_node_full_name(struct device_node *np)
+static inline const char *of_node_full_name(const struct device_node *np)
{
return np ? np->full_name : "<no-node>";
}
@@ -277,6 +277,8 @@
extern int of_parse_phandle_with_args(const struct device_node *np,
const char *list_name, const char *cells_name, int index,
struct of_phandle_args *out_args);
+extern int of_count_phandle_with_args(const struct device_node *np,
+ const char *list_name, const char *cells_name);
extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align));
extern int of_alias_get_id(struct device_node *np, const char *stem);
@@ -467,6 +469,13 @@
return -ENOSYS;
}
+static inline int of_count_phandle_with_args(struct device_node *np,
+ const char *list_name,
+ const char *cells_name)
+{
+ return -ENOSYS;
+}
+
static inline int of_alias_get_id(struct device_node *np, const char *stem)
{
return -ENOSYS;
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index c454f57..a83dc6f 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -50,9 +50,6 @@
extern int of_get_named_gpio_flags(struct device_node *np,
const char *list_name, int index, enum of_gpio_flags *flags);
-extern unsigned int of_gpio_named_count(struct device_node *np,
- const char* propname);
-
extern int of_mm_gpiochip_add(struct device_node *np,
struct of_mm_gpio_chip *mm_gc);
@@ -71,12 +68,6 @@
return -ENOSYS;
}
-static inline unsigned int of_gpio_named_count(struct device_node *np,
- const char* propname)
-{
- return 0;
-}
-
static inline int of_gpio_simple_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec,
u32 *flags)
@@ -90,22 +81,37 @@
#endif /* CONFIG_OF_GPIO */
/**
- * of_gpio_count - Count GPIOs for a device
+ * of_gpio_named_count() - Count GPIOs for a device
* @np: device node to count GPIOs for
+ * @propname: property name containing gpio specifier(s)
*
* The function returns the count of GPIOs specified for a node.
+ * Note that the empty GPIO specifiers count too. Returns either
+ * Number of gpios defined in property,
+ * -EINVAL for an incorrectly formed gpios property, or
+ * -ENOENT for a missing gpios property
*
- * Note that the empty GPIO specifiers counts too. For example,
- *
+ * Example:
* gpios = <0
- * &pio1 1 2
+ * &gpio1 1 2
* 0
- * &pio2 3 4>;
+ * &gpio2 3 4>;
*
- * defines four GPIOs (so this function will return 4), two of which
- * are not specified.
+ * The above example defines four GPIOs, two of which are not specified.
+ * This function will return '4'
*/
-static inline unsigned int of_gpio_count(struct device_node *np)
+static inline int of_gpio_named_count(struct device_node *np, const char* propname)
+{
+ return of_count_phandle_with_args(np, propname, "#gpio-cells");
+}
+
+/**
+ * of_gpio_count() - Count GPIOs for a device
+ * @np: device node to count GPIOs for
+ *
+ * Same as of_gpio_named_count, but hard coded to use the 'gpios' property
+ */
+static inline int of_gpio_count(struct device_node *np)
{
return of_gpio_named_count(np, "gpios");
}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 15472d6..6fa4dd2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1101,6 +1101,12 @@
return -1;
}
+static inline int
+pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
+{
+ return -1;
+}
+
static inline void pci_msi_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msi(struct pci_dev *dev)
@@ -1132,6 +1138,7 @@
}
#else
extern int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
+extern int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
extern void pci_msi_shutdown(struct pci_dev *dev);
extern void pci_disable_msi(struct pci_dev *dev);
extern int pci_msix_table_size(struct pci_dev *dev);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 6bfb2faa..e47ee46 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -135,16 +135,21 @@
struct { /* software */
struct hrtimer hrtimer;
};
+ struct { /* tracepoint */
+ struct task_struct *tp_target;
+ /* for tp_event->class */
+ struct list_head tp_list;
+ };
#ifdef CONFIG_HAVE_HW_BREAKPOINT
struct { /* breakpoint */
- struct arch_hw_breakpoint info;
- struct list_head bp_list;
/*
* Crufty hack to avoid the chicken and egg
* problem hw_breakpoint has with context
* creation and event initalization.
*/
struct task_struct *bp_target;
+ struct arch_hw_breakpoint info;
+ struct list_head bp_list;
};
#endif
};
@@ -817,6 +822,17 @@
} while (0)
+struct perf_pmu_events_attr {
+ struct device_attribute attr;
+ u64 id;
+};
+
+#define PMU_EVENT_ATTR(_name, _var, _id, _show) \
+static struct perf_pmu_events_attr _var = { \
+ .attr = __ATTR(_name, 0444, _show, NULL), \
+ .id = _id, \
+};
+
#define PMU_FORMAT_ATTR(_name, _format) \
static ssize_t \
_name##_show(struct device *dev, \
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
new file mode 100644
index 0000000..6e5f8a9
--- /dev/null
+++ b/include/linux/pinctrl/devinfo.h
@@ -0,0 +1,45 @@
+/*
+ * Per-device information from the pin control system.
+ * This is the stuff that get included into the device
+ * core.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef PINCTRL_DEVINFO_H
+#define PINCTRL_DEVINFO_H
+
+#ifdef CONFIG_PINCTRL
+
+/* The device core acts as a consumer toward pinctrl */
+#include <linux/pinctrl/consumer.h>
+
+/**
+ * struct dev_pin_info - pin state container for devices
+ * @p: pinctrl handle for the containing device
+ * @default_state: the default state for the handle, if found
+ */
+struct dev_pin_info {
+ struct pinctrl *p;
+ struct pinctrl_state *default_state;
+};
+
+extern int pinctrl_bind_pins(struct device *dev);
+
+#else
+
+/* Stubs if we're not using pinctrl */
+
+static inline int pinctrl_bind_pins(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PINCTRL */
+#endif /* PINCTRL_DEVINFO_H */
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 47a1bdd..72474e1 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -46,7 +46,11 @@
* @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
* (open emitter). Sending this config will enabale open drain mode, the
* argument is ignored.
- * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
+ * argument. The argument is in mA.
+ * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
+ * If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
+ * schmitt-trigger mode is disabled.
* @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
* schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
* the threshold value is given on a custom format as argument when
@@ -58,10 +62,15 @@
* @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
* supplies, the argument to this parameter (on a custom format) tells
* the driver which alternative power source to use.
+ * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
+ * this parameter (on a custom format) tells the driver which alternative
+ * slew rate to use.
* @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
* operation, if several modes of operation are supported these can be
* passed in the argument on a custom form, else just use argument 1
* to indicate low power mode, argument 0 turns low power mode off.
+ * @PIN_CONFIG_OUTPUT: this will configure the pin in output, use argument
+ * 1 to indicate high level, argument 0 to indicate low level.
* @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
* you need to pass in custom configurations to the pin controller, use
* PIN_CONFIG_END+1 as the base offset.
@@ -74,11 +83,14 @@
PIN_CONFIG_DRIVE_PUSH_PULL,
PIN_CONFIG_DRIVE_OPEN_DRAIN,
PIN_CONFIG_DRIVE_OPEN_SOURCE,
- PIN_CONFIG_INPUT_SCHMITT_DISABLE,
+ PIN_CONFIG_DRIVE_STRENGTH,
+ PIN_CONFIG_INPUT_SCHMITT_ENABLE,
PIN_CONFIG_INPUT_SCHMITT,
PIN_CONFIG_INPUT_DEBOUNCE,
PIN_CONFIG_POWER_SOURCE,
+ PIN_CONFIG_SLEW_RATE,
PIN_CONFIG_LOW_POWER_MODE,
+ PIN_CONFIG_OUTPUT,
PIN_CONFIG_END = 0x7FFF,
};
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 04d6700..778804d 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -154,6 +154,7 @@
#endif /* CONFIG_OF */
extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
+extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev);
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h
new file mode 100644
index 0000000..a7fd077
--- /dev/null
+++ b/include/linux/platform_data/lp8755.h
@@ -0,0 +1,71 @@
+/*
+ * LP8755 High Performance Power Management Unit Driver:System Interface Driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ * G.Shark Jeong <gshark.jeong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP8755_H
+#define _LP8755_H
+
+#include <linux/regulator/consumer.h>
+
+#define LP8755_NAME "lp8755-regulator"
+/*
+ *PWR FAULT : power fault detected
+ *OCP : over current protect activated
+ *OVP : over voltage protect activated
+ *TEMP_WARN : thermal warning
+ *TEMP_SHDN : thermal shutdonw detected
+ *I_LOAD : current measured
+ */
+#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL
+#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT
+#define LP8755_EVENT_OVP 0x10000
+#define LP8755_EVENT_TEMP_WARN 0x2000
+#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP
+#define LP8755_EVENT_I_LOAD 0x40000
+
+enum lp8755_bucks {
+ LP8755_BUCK0 = 0,
+ LP8755_BUCK1,
+ LP8755_BUCK2,
+ LP8755_BUCK3,
+ LP8755_BUCK4,
+ LP8755_BUCK5,
+ LP8755_BUCK_MAX,
+};
+
+/**
+ * multiphase configuration options
+ */
+enum lp8755_mphase_config {
+ MPHASE_CONF0,
+ MPHASE_CONF1,
+ MPHASE_CONF2,
+ MPHASE_CONF3,
+ MPHASE_CONF4,
+ MPHASE_CONF5,
+ MPHASE_CONF6,
+ MPHASE_CONF7,
+ MPHASE_CONF8,
+ MPHASE_CONF_MAX
+};
+
+/**
+ * struct lp8755_platform_data
+ * @mphase_type : Multiphase Switcher Configurations.
+ * @buck_data : buck0~6 init voltage in uV
+ */
+struct lp8755_platform_data {
+ int mphase;
+ struct regulator_init_data *buck_data[LP8755_BUCK_MAX];
+};
+#endif
diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h
new file mode 100644
index 0000000..ed9d3b3
--- /dev/null
+++ b/include/linux/platform_data/max6697.h
@@ -0,0 +1,36 @@
+/*
+ * max6697.h
+ * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAX6697_H
+#define MAX6697_H
+
+#include <linux/types.h>
+
+/*
+ * For all bit masks:
+ * bit 0: local temperature
+ * bit 1..7: remote temperatures
+ */
+struct max6697_platform_data {
+ bool smbus_timeout_disable; /* set to disable SMBus timeouts */
+ bool extended_range_enable; /* set to enable extended temp range */
+ bool beta_compensation; /* set to enable beta compensation */
+ u8 alert_mask; /* set bit to 1 to disable alert */
+ u8 over_temperature_mask; /* set bit to 1 to disable */
+ u8 resistance_cancellation; /* set bit to 0 to disable
+ * bit mask for MAX6581,
+ * boolean for other chips
+ */
+ u8 ideality_mask; /* set bit to 0 to disable */
+ u8 ideality_value; /* transistor ideality as per
+ * MAX6581 datasheet
+ */
+};
+
+#endif /* MAX6697_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index a65572d..c100456 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -22,6 +22,9 @@
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
+
+ /* toggle chip select after every word */
+ unsigned cs_per_word:1;
};
#endif
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 03d7bb1..97bcf23 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -31,7 +31,6 @@
/*
* Callbacks for platform drivers to implement.
*/
-extern void (*pm_idle)(void);
extern void (*pm_power_off)(void);
extern void (*pm_power_off_prepare)(void);
diff --git a/include/linux/pm2301_charger.h b/include/linux/pm2301_charger.h
new file mode 100644
index 0000000..fc3f026
--- /dev/null
+++ b/include/linux/pm2301_charger.h
@@ -0,0 +1,61 @@
+/*
+ * PM2301 charger driver.
+ *
+ * Copyright (C) 2012 ST Ericsson Corporation
+ *
+ * Contact: Olivier LAUNAY (olivier.launay@stericsson.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_PM2301_H
+#define __LINUX_PM2301_H
+
+/**
+ * struct pm2xxx_bm_charger_parameters - Charger specific parameters
+ * @ac_volt_max: maximum allowed AC charger voltage in mV
+ * @ac_curr_max: maximum allowed AC charger current in mA
+ */
+struct pm2xxx_bm_charger_parameters {
+ int ac_volt_max;
+ int ac_curr_max;
+};
+
+/**
+ * struct pm2xxx_bm_data - pm2xxx battery management data
+ * @enable_overshoot flag to enable VBAT overshoot control
+ * @chg_params charger parameters
+ */
+struct pm2xxx_bm_data {
+ bool enable_overshoot;
+ const struct pm2xxx_bm_charger_parameters *chg_params;
+};
+
+struct pm2xxx_charger_platform_data {
+ char **supplied_to;
+ size_t num_supplicants;
+ int i2c_bus;
+ const char *label;
+ int irq_number;
+ unsigned int lpn_gpio;
+ int irq_type;
+};
+
+struct pm2xxx_platform_data {
+ struct pm2xxx_charger_platform_data *wall_charger;
+ struct pm2xxx_bm_data *battery;
+};
+
+#endif /* __LINUX_PM2301_H */
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index f271860..c785c21 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -80,6 +80,12 @@
&& !dev->power.disable_depth;
}
+static inline bool pm_runtime_active(struct device *dev)
+{
+ return dev->power.runtime_status == RPM_ACTIVE
+ || dev->power.disable_depth;
+}
+
static inline bool pm_runtime_status_suspended(struct device *dev)
{
return dev->power.runtime_status == RPM_SUSPENDED;
@@ -132,6 +138,7 @@
static inline bool device_run_wake(struct device *dev) { return false; }
static inline void device_set_run_wake(struct device *dev, bool enable) {}
static inline bool pm_runtime_suspended(struct device *dev) { return false; }
+static inline bool pm_runtime_active(struct device *dev) { return true; }
static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
static inline bool pm_runtime_enabled(struct device *dev) { return false; }
diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h
index 97a1665..8dcc0f4 100644
--- a/include/linux/power/bq2415x_charger.h
+++ b/include/linux/power/bq2415x_charger.h
@@ -75,7 +75,8 @@
/* Supported modes with maximal current limit */
enum bq2415x_mode {
- BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */
+ BQ2415X_MODE_OFF, /* offline mode (charger disabled) */
+ BQ2415X_MODE_NONE, /* unknown charger (100mA) */
BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */
BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */
BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 1f0ab90..25c0982 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -54,6 +54,8 @@
POWER_SUPPLY_HEALTH_OVERVOLTAGE,
POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
POWER_SUPPLY_HEALTH_COLD,
+ POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE,
+ POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE,
};
enum {
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 9afc01e..86c4b62 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -98,9 +98,6 @@
extern asmlinkage __printf(1, 2)
void early_printk(const char *fmt, ...);
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
#ifdef CONFIG_PRINTK
asmlinkage __printf(5, 0)
int vprintk_emit(int facility, int level,
diff --git a/include/linux/profile.h b/include/linux/profile.h
index a0fc322..2112390 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -82,9 +82,6 @@
int profile_event_register(enum profile_type, struct notifier_block * n);
int profile_event_unregister(enum profile_type, struct notifier_block * n);
-int register_timer_hook(int (*hook)(struct pt_regs *));
-void unregister_timer_hook(int (*hook)(struct pt_regs *));
-
struct pt_regs;
#else
@@ -135,16 +132,6 @@
#define profile_handoff_task(a) (0)
#define profile_munmap(a) do { } while (0)
-static inline int register_timer_hook(int (*hook)(struct pt_regs *))
-{
- return -ENOSYS;
-}
-
-static inline void unregister_timer_hook(int (*hook)(struct pt_regs *))
-{
- return;
-}
-
#endif /* CONFIG_PROFILING */
#endif /* _LINUX_PROFILE_H */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index f366320..467cc63 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -155,6 +155,14 @@
#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
+/* LPSS SSP */
+#define SSITF 0x44 /* TX FIFO trigger level */
+#define SSITF_TxLoThresh(x) (((x) - 1) << 8)
+#define SSITF_TxHiThresh(x) ((x) - 1)
+
+#define SSIRF 0x48 /* RX FIFO trigger level */
+#define SSIRF_RxThresh(x) ((x) - 1)
+
enum pxa_ssp_type {
SSP_UNDEFINED = 0,
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
@@ -164,6 +172,7 @@
PXA168_SSP,
PXA910_SSP,
CE4100_SSP,
+ LPSS_SSP,
};
struct ssp_device {
@@ -206,6 +215,15 @@
return __raw_readl(dev->mmio_base + reg);
}
+#ifdef CONFIG_ARCH_PXA
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
+#else
+static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+ return NULL;
+}
+static inline void pxa_ssp_free(struct ssp_device *ssp) {}
+#endif
+
#endif
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 275aa3f..b758ce1 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -53,7 +53,10 @@
extern void rcutorture_record_test_transition(void);
extern void rcutorture_record_progress(unsigned long vernum);
extern void do_trace_rcu_torture_read(char *rcutorturename,
- struct rcu_head *rhp);
+ struct rcu_head *rhp,
+ unsigned long secs,
+ unsigned long c_old,
+ unsigned long c);
#else
static inline void rcutorture_record_test_transition(void)
{
@@ -63,9 +66,13 @@
}
#ifdef CONFIG_RCU_TRACE
extern void do_trace_rcu_torture_read(char *rcutorturename,
- struct rcu_head *rhp);
+ struct rcu_head *rhp,
+ unsigned long secs,
+ unsigned long c_old,
+ unsigned long c);
#else
-#define do_trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
+ do { } while (0)
#endif
#endif
@@ -749,7 +756,7 @@
* preemptible RCU implementations (TREE_PREEMPT_RCU and TINY_PREEMPT_RCU)
* in CONFIG_PREEMPT kernel builds, RCU read-side critical sections may
* be preempted, but explicit blocking is illegal. Finally, in preemptible
- * RCU implementations in real-time (CONFIG_PREEMPT_RT) kernel builds,
+ * RCU implementations in real-time (with -rt patchset) kernel builds,
* RCU read-side critical sections may be preempted and they may also
* block, but only when acquiring spinlocks that are subject to priority
* inheritance.
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index b7e95bf..bf77dfd 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -28,7 +28,8 @@
enum regcache_type {
REGCACHE_NONE,
REGCACHE_RBTREE,
- REGCACHE_COMPRESSED
+ REGCACHE_COMPRESSED,
+ REGCACHE_FLAT,
};
/**
@@ -127,7 +128,18 @@
* @lock_arg: this field is passed as the only argument of lock/unlock
* functions (ignored in case regular lock/unlock functions
* are not overridden).
- *
+ * @reg_read: Optional callback that if filled will be used to perform
+ * all the reads from the registers. Should only be provided for
+ * devices whos read operation cannot be represented as a simple read
+ * operation on a bus such as SPI, I2C, etc. Most of the devices do
+ * not need this.
+ * @reg_write: Same as above for writing.
+ * @fast_io: Register IO is fast. Use a spinlock instead of a mutex
+ * to perform locking. This field is ignored if custom lock/unlock
+ * functions are used (see fields lock/unlock of struct regmap_config).
+ * This field is a duplicate of a similar file in
+ * 'struct regmap_bus' and serves exact same purpose.
+ * Use it only for "no-bus" cases.
* @max_register: Optional, specifies the maximum valid register index.
* @wr_table: Optional, points to a struct regmap_access_table specifying
* valid ranges for write access.
@@ -177,6 +189,11 @@
regmap_unlock unlock;
void *lock_arg;
+ int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
+ int (*reg_write)(void *context, unsigned int reg, unsigned int val);
+
+ bool fast_io;
+
unsigned int max_register;
const struct regmap_access_table *wr_table;
const struct regmap_access_table *rd_table;
@@ -235,14 +252,21 @@
unsigned int window_len;
};
+struct regmap_async;
+
typedef int (*regmap_hw_write)(void *context, const void *data,
size_t count);
typedef int (*regmap_hw_gather_write)(void *context,
const void *reg, size_t reg_len,
const void *val, size_t val_len);
+typedef int (*regmap_hw_async_write)(void *context,
+ const void *reg, size_t reg_len,
+ const void *val, size_t val_len,
+ struct regmap_async *async);
typedef int (*regmap_hw_read)(void *context,
const void *reg_buf, size_t reg_size,
void *val_buf, size_t val_size);
+typedef struct regmap_async *(*regmap_hw_async_alloc)(void);
typedef void (*regmap_hw_free_context)(void *context);
/**
@@ -255,8 +279,11 @@
* @write: Write operation.
* @gather_write: Write operation with split register/value, return -ENOTSUPP
* if not implemented on a given device.
+ * @async_write: Write operation which completes asynchronously, optional and
+ * must serialise with respect to non-async I/O.
* @read: Read operation. Data is returned in the buffer used to transmit
* data.
+ * @async_alloc: Allocate a regmap_async() structure.
* @read_flag_mask: Mask to be set in the top byte of the register when doing
* a read.
* @reg_format_endian_default: Default endianness for formatted register
@@ -265,13 +292,16 @@
* @val_format_endian_default: Default endianness for formatted register
* values. Used when the regmap_config specifies DEFAULT. If this is
* DEFAULT, BIG is assumed.
+ * @async_size: Size of struct used for async work.
*/
struct regmap_bus {
bool fast_io;
regmap_hw_write write;
regmap_hw_gather_write gather_write;
+ regmap_hw_async_write async_write;
regmap_hw_read read;
regmap_hw_free_context free_context;
+ regmap_hw_async_alloc async_alloc;
u8 read_flag_mask;
enum regmap_endian reg_format_endian_default;
enum regmap_endian val_format_endian_default;
@@ -285,9 +315,9 @@
const struct regmap_config *config);
struct regmap *regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *regmap_init_mmio(struct device *dev,
- void __iomem *regs,
- const struct regmap_config *config);
+struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+ void __iomem *regs,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init(struct device *dev,
const struct regmap_bus *bus,
@@ -297,9 +327,44 @@
const struct regmap_config *config);
struct regmap *devm_regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *devm_regmap_init_mmio(struct device *dev,
- void __iomem *regs,
- const struct regmap_config *config);
+struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+ void __iomem *regs,
+ const struct regmap_config *config);
+
+/**
+ * regmap_init_mmio(): Initialise register map
+ *
+ * @dev: Device that will be interacted with
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+static inline struct regmap *regmap_init_mmio(struct device *dev,
+ void __iomem *regs,
+ const struct regmap_config *config)
+{
+ return regmap_init_mmio_clk(dev, NULL, regs, config);
+}
+
+/**
+ * devm_regmap_init_mmio(): Initialise managed register map
+ *
+ * @dev: Device that will be interacted with
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+static inline struct regmap *devm_regmap_init_mmio(struct device *dev,
+ void __iomem *regs,
+ const struct regmap_config *config)
+{
+ return devm_regmap_init_mmio_clk(dev, NULL, regs, config);
+}
void regmap_exit(struct regmap *map);
int regmap_reinit_cache(struct regmap *map,
@@ -310,6 +375,8 @@
const void *val, size_t val_len);
int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
size_t val_count);
+int regmap_raw_write_async(struct regmap *map, unsigned int reg,
+ const void *val, size_t val_len);
int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
int regmap_raw_read(struct regmap *map, unsigned int reg,
void *val, size_t val_len);
@@ -321,6 +388,7 @@
unsigned int mask, unsigned int val,
bool *change);
int regmap_get_val_bytes(struct regmap *map);
+int regmap_async_complete(struct regmap *map);
int regcache_sync(struct regmap *map);
int regcache_sync_region(struct regmap *map, unsigned int min,
@@ -381,6 +449,7 @@
unsigned int wake_base;
unsigned int irq_reg_stride;
unsigned int mask_invert;
+ unsigned int wake_invert;
bool runtime_pm;
int num_regs;
@@ -422,6 +491,13 @@
return -EINVAL;
}
+static inline int regmap_raw_write_async(struct regmap *map, unsigned int reg,
+ const void *val, size_t val_len)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
static inline int regmap_bulk_write(struct regmap *map, unsigned int reg,
const void *val, size_t val_count)
{
@@ -500,6 +576,11 @@
WARN_ONCE(1, "regmap API is disabled");
}
+static inline void regmap_async_complete(struct regmap *map)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+}
+
static inline int regmap_register_patch(struct regmap *map,
const struct reg_default *regs,
int num_regs)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index d10bb0f..23070fd 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -193,6 +193,10 @@
*
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
+ * @apply_reg: Register for initiate voltage change on the output when
+ * using regulator_set_voltage_sel_regmap
+ * @apply_bit: Register bitfield used for initiate voltage change on the
+ * output when using regulator_set_voltage_sel_regmap
* @enable_reg: Register for control when using regmap enable/disable ops
* @enable_mask: Mask for control when using regmap enable/disable ops
*
@@ -218,6 +222,8 @@
unsigned int vsel_reg;
unsigned int vsel_mask;
+ unsigned int apply_reg;
+ unsigned int apply_bit;
unsigned int enable_reg;
unsigned int enable_mask;
unsigned int bypass_reg;
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 519777e..1342e69 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -167,6 +167,7 @@
unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
unsigned long ring_buffer_dropped_events_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_read_events_cpu(struct ring_buffer *buffer, int cpu);
u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 9531845c..11d05f9 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -138,6 +138,7 @@
extern int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm);
extern int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm);
extern int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs);
+extern int rtc_set_ntp_time(struct timespec now);
int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm);
extern int rtc_read_alarm(struct rtc_device *rtc,
struct rtc_wkalrm *alrm);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d2112477..e4112aa 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -304,19 +304,6 @@
}
#endif
-#ifdef CONFIG_DETECT_HUNG_TASK
-extern unsigned int sysctl_hung_task_panic;
-extern unsigned long sysctl_hung_task_check_count;
-extern unsigned long sysctl_hung_task_timeout_secs;
-extern unsigned long sysctl_hung_task_warnings;
-extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
- void __user *buffer,
- size_t *lenp, loff_t *ppos);
-#else
-/* Avoid need for ifdefs elsewhere in the code */
-enum { sysctl_hung_task_timeout_secs = 0 };
-#endif
-
/* Attach to any functions which should be ignored in wchan output. */
#define __sched __attribute__((__section__(".sched.text")))
@@ -338,23 +325,6 @@
struct nsproxy;
struct user_namespace;
-/*
- * Default maximum number of active map areas, this limits the number of vmas
- * per mm struct. Users can overwrite this number by sysctl but there is a
- * problem.
- *
- * When a program's coredump is generated as ELF format, a section is created
- * per a vma. In ELF, the number of sections is represented in unsigned short.
- * This means the number of sections should be smaller than 65535 at coredump.
- * Because the kernel adds some informative sections to a image of program at
- * generating coredump, we need some margin. The number of extra sections is
- * 1-3 now and depends on arch. We use "5" as safe margin, here.
- */
-#define MAPCOUNT_ELF_CORE_MARGIN (5)
-#define DEFAULT_MAX_MAP_COUNT (USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
-
-extern int sysctl_max_map_count;
-
#include <linux/aio.h>
#ifdef CONFIG_MMU
@@ -1194,6 +1164,7 @@
/* rq "owned" by this entity/group: */
struct cfs_rq *my_q;
#endif
+
/*
* Load-tracking only depends on SMP, FAIR_GROUP_SCHED dependency below may be
* removed when useful for applications beyond shares distribution (e.g.
@@ -1208,6 +1179,7 @@
struct sched_rt_entity {
struct list_head run_list;
unsigned long timeout;
+ unsigned long watchdog_stamp;
unsigned int time_slice;
struct sched_rt_entity *back;
@@ -1220,11 +1192,6 @@
#endif
};
-/*
- * default timeslice is 100 msecs (used only for SCHED_RR tasks).
- * Timeslices get refilled after they expire.
- */
-#define RR_TIMESLICE (100 * HZ / 1000)
struct rcu_node;
@@ -1368,6 +1335,15 @@
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
struct cputime prev_cputime;
#endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+ seqlock_t vtime_seqlock;
+ unsigned long long vtime_snap;
+ enum {
+ VTIME_SLEEPING = 0,
+ VTIME_USER,
+ VTIME_SYS,
+ } vtime_snap_whence;
+#endif
unsigned long nvcsw, nivcsw; /* context switch counts */
struct timespec start_time; /* monotonic time */
struct timespec real_start_time; /* boot based time */
@@ -1622,37 +1598,6 @@
}
#endif
-/*
- * Priority of a process goes from 0..MAX_PRIO-1, valid RT
- * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
- * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
- * values are inverted: lower p->prio value means higher priority.
- *
- * The MAX_USER_RT_PRIO value allows the actual maximum
- * RT priority to be separate from the value exported to
- * user-space. This allows kernel threads to set their
- * priority to a value higher than any user task. Note:
- * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
- */
-
-#define MAX_USER_RT_PRIO 100
-#define MAX_RT_PRIO MAX_USER_RT_PRIO
-
-#define MAX_PRIO (MAX_RT_PRIO + 40)
-#define DEFAULT_PRIO (MAX_RT_PRIO + 20)
-
-static inline int rt_prio(int prio)
-{
- if (unlikely(prio < MAX_RT_PRIO))
- return 1;
- return 0;
-}
-
-static inline int rt_task(struct task_struct *p)
-{
- return rt_prio(p->prio);
-}
-
static inline struct pid *task_pid(struct task_struct *task)
{
return task->pids[PIDTYPE_PID].pid;
@@ -1792,6 +1737,37 @@
__put_task_struct(t);
}
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+extern void task_cputime(struct task_struct *t,
+ cputime_t *utime, cputime_t *stime);
+extern void task_cputime_scaled(struct task_struct *t,
+ cputime_t *utimescaled, cputime_t *stimescaled);
+extern cputime_t task_gtime(struct task_struct *t);
+#else
+static inline void task_cputime(struct task_struct *t,
+ cputime_t *utime, cputime_t *stime)
+{
+ if (utime)
+ *utime = t->utime;
+ if (stime)
+ *stime = t->stime;
+}
+
+static inline void task_cputime_scaled(struct task_struct *t,
+ cputime_t *utimescaled,
+ cputime_t *stimescaled)
+{
+ if (utimescaled)
+ *utimescaled = t->utimescaled;
+ if (stimescaled)
+ *stimescaled = t->stimescaled;
+}
+
+static inline cputime_t task_gtime(struct task_struct *t)
+{
+ return t->gtime;
+}
+#endif
extern void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st);
extern void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st);
@@ -2033,58 +2009,7 @@
static inline void wake_up_idle_cpu(int cpu) { }
#endif
-extern unsigned int sysctl_sched_latency;
-extern unsigned int sysctl_sched_min_granularity;
-extern unsigned int sysctl_sched_wakeup_granularity;
-extern unsigned int sysctl_sched_child_runs_first;
-
-enum sched_tunable_scaling {
- SCHED_TUNABLESCALING_NONE,
- SCHED_TUNABLESCALING_LOG,
- SCHED_TUNABLESCALING_LINEAR,
- SCHED_TUNABLESCALING_END,
-};
-extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;
-
-extern unsigned int sysctl_numa_balancing_scan_delay;
-extern unsigned int sysctl_numa_balancing_scan_period_min;
-extern unsigned int sysctl_numa_balancing_scan_period_max;
-extern unsigned int sysctl_numa_balancing_scan_period_reset;
-extern unsigned int sysctl_numa_balancing_scan_size;
-extern unsigned int sysctl_numa_balancing_settle_count;
-
-#ifdef CONFIG_SCHED_DEBUG
-extern unsigned int sysctl_sched_migration_cost;
-extern unsigned int sysctl_sched_nr_migrate;
-extern unsigned int sysctl_sched_time_avg;
-extern unsigned int sysctl_timer_migration;
-extern unsigned int sysctl_sched_shares_window;
-
-int sched_proc_update_handler(struct ctl_table *table, int write,
- void __user *buffer, size_t *length,
- loff_t *ppos);
-#endif
-#ifdef CONFIG_SCHED_DEBUG
-static inline unsigned int get_sysctl_timer_migration(void)
-{
- return sysctl_timer_migration;
-}
-#else
-static inline unsigned int get_sysctl_timer_migration(void)
-{
- return 1;
-}
-#endif
-extern unsigned int sysctl_sched_rt_period;
-extern int sysctl_sched_rt_runtime;
-
-int sched_rt_handler(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos);
-
#ifdef CONFIG_SCHED_AUTOGROUP
-extern unsigned int sysctl_sched_autogroup_enabled;
-
extern void sched_autogroup_create_attach(struct task_struct *p);
extern void sched_autogroup_detach(struct task_struct *p);
extern void sched_autogroup_fork(struct signal_struct *sig);
@@ -2100,30 +2025,6 @@
static inline void sched_autogroup_exit(struct signal_struct *sig) { }
#endif
-#ifdef CONFIG_CFS_BANDWIDTH
-extern unsigned int sysctl_sched_cfs_bandwidth_slice;
-#endif
-
-#ifdef CONFIG_RT_MUTEXES
-extern int rt_mutex_getprio(struct task_struct *p);
-extern void rt_mutex_setprio(struct task_struct *p, int prio);
-extern void rt_mutex_adjust_pi(struct task_struct *p);
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
- return tsk->pi_blocked_on != NULL;
-}
-#else
-static inline int rt_mutex_getprio(struct task_struct *p)
-{
- return p->normal_prio;
-}
-# define rt_mutex_adjust_pi(p) do { } while (0)
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
- return false;
-}
-#endif
-
extern bool yield_to(struct task_struct *p, bool preempt);
extern void set_user_nice(struct task_struct *p, long nice);
extern int task_prio(const struct task_struct *p);
@@ -2753,14 +2654,15 @@
extern long sched_setaffinity(pid_t pid, const struct cpumask *new_mask);
extern long sched_getaffinity(pid_t pid, struct cpumask *mask);
-extern void normalize_rt_tasks(void);
-
#ifdef CONFIG_CGROUP_SCHED
extern struct task_group root_task_group;
extern struct task_group *sched_create_group(struct task_group *parent);
+extern void sched_online_group(struct task_group *tg,
+ struct task_group *parent);
extern void sched_destroy_group(struct task_group *tg);
+extern void sched_offline_group(struct task_group *tg);
extern void sched_move_task(struct task_struct *tsk);
#ifdef CONFIG_FAIR_GROUP_SCHED
extern int sched_group_set_shares(struct task_group *tg, unsigned long shares);
diff --git a/include/linux/sched/rt.h b/include/linux/sched/rt.h
new file mode 100644
index 0000000..94e19ea
--- /dev/null
+++ b/include/linux/sched/rt.h
@@ -0,0 +1,58 @@
+#ifndef _SCHED_RT_H
+#define _SCHED_RT_H
+
+/*
+ * Priority of a process goes from 0..MAX_PRIO-1, valid RT
+ * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
+ * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
+ * values are inverted: lower p->prio value means higher priority.
+ *
+ * The MAX_USER_RT_PRIO value allows the actual maximum
+ * RT priority to be separate from the value exported to
+ * user-space. This allows kernel threads to set their
+ * priority to a value higher than any user task. Note:
+ * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+ */
+
+#define MAX_USER_RT_PRIO 100
+#define MAX_RT_PRIO MAX_USER_RT_PRIO
+
+#define MAX_PRIO (MAX_RT_PRIO + 40)
+#define DEFAULT_PRIO (MAX_RT_PRIO + 20)
+
+static inline int rt_prio(int prio)
+{
+ if (unlikely(prio < MAX_RT_PRIO))
+ return 1;
+ return 0;
+}
+
+static inline int rt_task(struct task_struct *p)
+{
+ return rt_prio(p->prio);
+}
+
+#ifdef CONFIG_RT_MUTEXES
+extern int rt_mutex_getprio(struct task_struct *p);
+extern void rt_mutex_setprio(struct task_struct *p, int prio);
+extern void rt_mutex_adjust_pi(struct task_struct *p);
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+ return tsk->pi_blocked_on != NULL;
+}
+#else
+static inline int rt_mutex_getprio(struct task_struct *p)
+{
+ return p->normal_prio;
+}
+# define rt_mutex_adjust_pi(p) do { } while (0)
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+ return false;
+}
+#endif
+
+extern void normalize_rt_tasks(void);
+
+
+#endif /* _SCHED_RT_H */
diff --git a/include/linux/sched/sysctl.h b/include/linux/sched/sysctl.h
new file mode 100644
index 0000000..d2bb0ae
--- /dev/null
+++ b/include/linux/sched/sysctl.h
@@ -0,0 +1,110 @@
+#ifndef _SCHED_SYSCTL_H
+#define _SCHED_SYSCTL_H
+
+#ifdef CONFIG_DETECT_HUNG_TASK
+extern unsigned int sysctl_hung_task_panic;
+extern unsigned long sysctl_hung_task_check_count;
+extern unsigned long sysctl_hung_task_timeout_secs;
+extern unsigned long sysctl_hung_task_warnings;
+extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
+ void __user *buffer,
+ size_t *lenp, loff_t *ppos);
+#else
+/* Avoid need for ifdefs elsewhere in the code */
+enum { sysctl_hung_task_timeout_secs = 0 };
+#endif
+
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN (5)
+#define DEFAULT_MAX_MAP_COUNT (USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
+
+extern int sysctl_max_map_count;
+
+extern unsigned int sysctl_sched_latency;
+extern unsigned int sysctl_sched_min_granularity;
+extern unsigned int sysctl_sched_wakeup_granularity;
+extern unsigned int sysctl_sched_child_runs_first;
+
+enum sched_tunable_scaling {
+ SCHED_TUNABLESCALING_NONE,
+ SCHED_TUNABLESCALING_LOG,
+ SCHED_TUNABLESCALING_LINEAR,
+ SCHED_TUNABLESCALING_END,
+};
+extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;
+
+extern unsigned int sysctl_numa_balancing_scan_delay;
+extern unsigned int sysctl_numa_balancing_scan_period_min;
+extern unsigned int sysctl_numa_balancing_scan_period_max;
+extern unsigned int sysctl_numa_balancing_scan_period_reset;
+extern unsigned int sysctl_numa_balancing_scan_size;
+extern unsigned int sysctl_numa_balancing_settle_count;
+
+#ifdef CONFIG_SCHED_DEBUG
+extern unsigned int sysctl_sched_migration_cost;
+extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_sched_time_avg;
+extern unsigned int sysctl_timer_migration;
+extern unsigned int sysctl_sched_shares_window;
+
+int sched_proc_update_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *length,
+ loff_t *ppos);
+#endif
+#ifdef CONFIG_SCHED_DEBUG
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+ return sysctl_timer_migration;
+}
+#else
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+ return 1;
+}
+#endif
+
+/*
+ * control realtime throttling:
+ *
+ * /proc/sys/kernel/sched_rt_period_us
+ * /proc/sys/kernel/sched_rt_runtime_us
+ */
+extern unsigned int sysctl_sched_rt_period;
+extern int sysctl_sched_rt_runtime;
+
+#ifdef CONFIG_CFS_BANDWIDTH
+extern unsigned int sysctl_sched_cfs_bandwidth_slice;
+#endif
+
+#ifdef CONFIG_SCHED_AUTOGROUP
+extern unsigned int sysctl_sched_autogroup_enabled;
+#endif
+
+/*
+ * default timeslice is 100 msecs (used only for SCHED_RR tasks).
+ * Timeslices get refilled after they expire.
+ */
+#define RR_TIMESLICE (100 * HZ / 1000)
+
+extern int sched_rr_timeslice;
+
+extern int sched_rr_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos);
+
+extern int sched_rt_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos);
+
+#endif /* _SCHED_SYSCTL_H */
diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h
index e0106d8..c65dee0 100644
--- a/include/linux/smpboot.h
+++ b/include/linux/smpboot.h
@@ -14,6 +14,8 @@
* @thread_should_run: Check whether the thread should run or not. Called with
* preemption disabled.
* @thread_fn: The associated thread function
+ * @create: Optional setup function, called when the thread gets
+ * created (Not called from the thread context)
* @setup: Optional setup function, called when the thread gets
* operational the first time
* @cleanup: Optional cleanup function, called when the thread
@@ -22,6 +24,7 @@
* parked (cpu offline)
* @unpark: Optional unpark function, called when the thread is
* unparked (cpu online)
+ * @selfparking: Thread is not parked by the park function.
* @thread_comm: The base name of the thread
*/
struct smp_hotplug_thread {
@@ -29,10 +32,12 @@
struct list_head list;
int (*thread_should_run)(unsigned int cpu);
void (*thread_fn)(unsigned int cpu);
+ void (*create)(unsigned int cpu);
void (*setup)(unsigned int cpu);
void (*cleanup)(unsigned int cpu, bool online);
void (*park)(unsigned int cpu);
void (*unpark)(unsigned int cpu);
+ bool selfparking;
const char *thread_comm;
};
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index c73d144..82d5111 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -28,6 +28,15 @@
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
+
+ /* DMA engine specific config */
+ int rx_chan_id;
+ int tx_chan_id;
+ int rx_slave_id;
+ int tx_slave_id;
+
+ /* For non-PXA arches */
+ struct ssp_device ssp;
};
/* spi_board_info.controller_data for SPI slave devices,
@@ -35,6 +44,7 @@
*/
struct pxa2xx_spi_chip {
u8 tx_threshold;
+ u8 tx_hi_threshold;
u8 rx_threshold;
u8 dma_burst_size;
u32 timeout;
@@ -50,103 +60,5 @@
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
-#else
-/*
- * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
- * plat/ include path.
- * The CE4100 does not provide DMA support. This bits are here to let the driver
- * compile and will never be used. Maybe we get DMA support at a later point in
- * time.
- */
-
-#define DCSR(n) (n)
-#define DSADR(n) (n)
-#define DTADR(n) (n)
-#define DCMD(n) (n)
-#define DRCMR(n) (n)
-
-#define DCSR_RUN (1 << 31) /* Run Bit */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */
-
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */
-#define DDADR_STOP (1 << 0) /* Stop */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-static inline int pxa_request_dma(char *name,
- pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data)
-{
- return -ENODEV;
-}
-
-static inline void pxa_free_dma(int dma_ch)
-{
-}
-
-/*
- * The CE4100 does not have the clk framework implemented and SPI clock can
- * not be switched on/off or the divider changed.
- */
-static inline void clk_disable(struct clk *clk)
-{
-}
-
-static inline int clk_enable(struct clk *clk)
-{
- return 0;
-}
-
-static inline unsigned long clk_get_rate(struct clk *clk)
-{
- return 3686400;
-}
-
#endif
#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index f629189..30e9c50 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -57,6 +57,8 @@
* @modalias: Name of the driver to use with this device, or an alias
* for that name. This appears in the sysfs "modalias" attribute
* for driver coldplugging, and in uevents used for hotplugging
+ * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
+ * when not using a GPIO line)
*
* A @spi_device is used to interchange data between an SPI slave
* (usually a discrete chip) and CPU memory.
@@ -258,6 +260,9 @@
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
+ * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
+ * number. Any individual value may be -EINVAL for CS lines that
+ * are not GPIOs (driven by the SPI controller itself).
*
* Each SPI master controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h
index 369b3d7..1634ce3 100644
--- a/include/linux/spi/spi_gpio.h
+++ b/include/linux/spi/spi_gpio.h
@@ -62,8 +62,8 @@
*/
struct spi_gpio_platform_data {
unsigned sck;
- unsigned mosi;
- unsigned miso;
+ unsigned long mosi;
+ unsigned long miso;
u16 num_chipselect;
};
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index 6eb691b..04f4121 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -151,30 +151,14 @@
* Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
* and while lockdep is disabled.
*
- * Note that if the CPU is in the idle loop from an RCU point of view
- * (ie: that we are in the section between rcu_idle_enter() and
- * rcu_idle_exit()) then srcu_read_lock_held() returns false even if
- * the CPU did an srcu_read_lock(). The reason for this is that RCU
- * ignores CPUs that are in such a section, considering these as in
- * extended quiescent state, so such a CPU is effectively never in an
- * RCU read-side critical section regardless of what RCU primitives it
- * invokes. This state of affairs is required --- we need to keep an
- * RCU-free window in idle where the CPU may possibly enter into low
- * power mode. This way we can notice an extended quiescent state to
- * other CPUs that started a grace period. Otherwise we would delay any
- * grace period as long as we run in the idle task.
- *
- * Similarly, we avoid claiming an SRCU read lock held if the current
- * CPU is offline.
+ * Note that SRCU is based on its own statemachine and it doesn't
+ * relies on normal RCU, it can be called from the CPU which
+ * is in the idle loop from an RCU point of view or offline.
*/
static inline int srcu_read_lock_held(struct srcu_struct *sp)
{
if (!debug_lockdep_rcu_enabled())
return 1;
- if (rcu_is_cpu_idle())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
return lock_is_held(&sp->dep_map);
}
@@ -236,8 +220,6 @@
int retval = __srcu_read_lock(sp);
rcu_lock_acquire(&(sp)->dep_map);
- rcu_lockdep_assert(!rcu_is_cpu_idle(),
- "srcu_read_lock() used illegally while idle");
return retval;
}
@@ -251,8 +233,6 @@
static inline void srcu_read_unlock(struct srcu_struct *sp, int idx)
__releases(sp)
{
- rcu_lockdep_assert(!rcu_is_cpu_idle(),
- "srcu_read_unlock() used illegally while idle");
rcu_lock_release(&(sp)->dep_map);
__srcu_read_unlock(sp, idx);
}
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 0c808d7..d4e3f16 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -34,8 +34,10 @@
typedef int __bitwise suspend_state_t;
#define PM_SUSPEND_ON ((__force suspend_state_t) 0)
-#define PM_SUSPEND_STANDBY ((__force suspend_state_t) 1)
+#define PM_SUSPEND_FREEZE ((__force suspend_state_t) 1)
+#define PM_SUSPEND_STANDBY ((__force suspend_state_t) 2)
#define PM_SUSPEND_MEM ((__force suspend_state_t) 3)
+#define PM_SUSPEND_MIN PM_SUSPEND_FREEZE
#define PM_SUSPEND_MAX ((__force suspend_state_t) 4)
enum suspend_stat_step {
@@ -192,6 +194,7 @@
*/
extern void suspend_set_ops(const struct platform_suspend_ops *ops);
extern int suspend_valid_only_mem(suspend_state_t state);
+extern void freeze_wake(void);
/**
* arch_suspend_disable_irqs - disable IRQs for suspend
@@ -217,6 +220,7 @@
static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
+static inline void freeze_wake(void) {}
#endif /* !CONFIG_SUSPEND */
/* struct pbe is used for creating lists of pages that should be restored
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 381f06d..e2cee22 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -181,6 +181,10 @@
const struct attribute_group *grp);
void sysfs_unmerge_group(struct kobject *kobj,
const struct attribute_group *grp);
+int sysfs_add_link_to_group(struct kobject *kobj, const char *group_name,
+ struct kobject *target, const char *link_name);
+void sysfs_remove_link_from_group(struct kobject *kobj, const char *group_name,
+ const char *link_name);
void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr);
void sysfs_notify_dirent(struct sysfs_dirent *sd);
@@ -326,6 +330,18 @@
{
}
+static inline int sysfs_add_link_to_group(struct kobject *kobj,
+ const char *group_name, struct kobject *target,
+ const char *link_name)
+{
+ return 0;
+}
+
+static inline void sysfs_remove_link_from_group(struct kobject *kobj,
+ const char *group_name, const char *link_name)
+{
+}
+
static inline void sysfs_notify(struct kobject *kobj, const char *dir,
const char *attr)
{
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 1a6567b..553272e 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -8,6 +8,8 @@
#include <linux/clockchips.h>
#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/hrtimer.h>
#ifdef CONFIG_GENERIC_CLOCKEVENTS
@@ -122,13 +124,26 @@
#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
# ifdef CONFIG_NO_HZ
+DECLARE_PER_CPU(struct tick_sched, tick_cpu_sched);
+
+static inline int tick_nohz_tick_stopped(void)
+{
+ return __this_cpu_read(tick_cpu_sched.tick_stopped);
+}
+
extern void tick_nohz_idle_enter(void);
extern void tick_nohz_idle_exit(void);
extern void tick_nohz_irq_exit(void);
extern ktime_t tick_nohz_get_sleep_length(void);
extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time);
-# else
+
+# else /* !CONFIG_NO_HZ */
+static inline int tick_nohz_tick_stopped(void)
+{
+ return 0;
+}
+
static inline void tick_nohz_idle_enter(void) { }
static inline void tick_nohz_idle_exit(void) { }
diff --git a/include/linux/time.h b/include/linux/time.h
index 4d358e9..a3ab6a8 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -115,8 +115,20 @@
return true;
}
+extern bool persistent_clock_exist;
+
+#ifdef ALWAYS_USE_PERSISTENT_CLOCK
+#define has_persistent_clock() true
+#else
+static inline bool has_persistent_clock(void)
+{
+ return persistent_clock_exist;
+}
+#endif
+
extern void read_persistent_clock(struct timespec *ts);
extern void read_boot_clock(struct timespec *ts);
+extern int persistent_clock_is_local;
extern int update_persistent_clock(struct timespec now);
void timekeeping_init(void);
extern int timekeeping_suspended;
@@ -158,6 +170,7 @@
struct itimerval *ovalue);
extern unsigned int alarm_setitimer(unsigned int seconds);
extern int do_getitimer(int which, struct itimerval *value);
+extern int __getnstimeofday(struct timespec *tv);
extern void getnstimeofday(struct timespec *tv);
extern void getrawmonotonic(struct timespec *ts);
extern void getnstime_raw_and_real(struct timespec *ts_raw,
diff --git a/include/linux/tsacct_kern.h b/include/linux/tsacct_kern.h
index 44893e5..3251965 100644
--- a/include/linux/tsacct_kern.h
+++ b/include/linux/tsacct_kern.h
@@ -23,12 +23,15 @@
#ifdef CONFIG_TASK_XACCT
extern void xacct_add_tsk(struct taskstats *stats, struct task_struct *p);
extern void acct_update_integrals(struct task_struct *tsk);
+extern void acct_account_cputime(struct task_struct *tsk);
extern void acct_clear_integrals(struct task_struct *tsk);
#else
static inline void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
{}
static inline void acct_update_integrals(struct task_struct *tsk)
{}
+static inline void acct_account_cputime(struct task_struct *tsk)
+{}
static inline void acct_clear_integrals(struct task_struct *tsk)
{}
#endif /* CONFIG_TASK_XACCT */
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index 4f628a6..02b83db 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -35,13 +35,20 @@
# include <asm/uprobes.h>
#endif
+#define UPROBE_HANDLER_REMOVE 1
+#define UPROBE_HANDLER_MASK 1
+
+enum uprobe_filter_ctx {
+ UPROBE_FILTER_REGISTER,
+ UPROBE_FILTER_UNREGISTER,
+ UPROBE_FILTER_MMAP,
+};
+
struct uprobe_consumer {
int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs);
- /*
- * filter is optional; If a filter exists, handler is run
- * if and only if filter returns true.
- */
- bool (*filter)(struct uprobe_consumer *self, struct task_struct *task);
+ bool (*filter)(struct uprobe_consumer *self,
+ enum uprobe_filter_ctx ctx,
+ struct mm_struct *mm);
struct uprobe_consumer *next;
};
@@ -94,6 +101,7 @@
extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
extern bool __weak is_swbp_insn(uprobe_opcode_t *insn);
extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
+extern int uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool);
extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
extern int uprobe_mmap(struct vm_area_struct *vma);
extern void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -117,6 +125,11 @@
{
return -ENOSYS;
}
+static inline int
+uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool add)
+{
+ return -ENOSYS;
+}
static inline void
uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
{
diff --git a/include/linux/vtime.h b/include/linux/vtime.h
index ae30ab5..71a5782 100644
--- a/include/linux/vtime.h
+++ b/include/linux/vtime.h
@@ -6,15 +6,46 @@
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
extern void vtime_task_switch(struct task_struct *prev);
extern void vtime_account_system(struct task_struct *tsk);
-extern void vtime_account_system_irqsafe(struct task_struct *tsk);
extern void vtime_account_idle(struct task_struct *tsk);
extern void vtime_account_user(struct task_struct *tsk);
-extern void vtime_account(struct task_struct *tsk);
-#else
+extern void vtime_account_irq_enter(struct task_struct *tsk);
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+static inline bool vtime_accounting_enabled(void) { return true; }
+#endif
+
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+
static inline void vtime_task_switch(struct task_struct *prev) { }
static inline void vtime_account_system(struct task_struct *tsk) { }
-static inline void vtime_account_system_irqsafe(struct task_struct *tsk) { }
-static inline void vtime_account(struct task_struct *tsk) { }
+static inline void vtime_account_user(struct task_struct *tsk) { }
+static inline void vtime_account_irq_enter(struct task_struct *tsk) { }
+static inline bool vtime_accounting_enabled(void) { return false; }
+#endif
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+extern void arch_vtime_task_switch(struct task_struct *tsk);
+extern void vtime_account_irq_exit(struct task_struct *tsk);
+extern bool vtime_accounting_enabled(void);
+extern void vtime_user_enter(struct task_struct *tsk);
+static inline void vtime_user_exit(struct task_struct *tsk)
+{
+ vtime_account_user(tsk);
+}
+extern void vtime_guest_enter(struct task_struct *tsk);
+extern void vtime_guest_exit(struct task_struct *tsk);
+extern void vtime_init_idle(struct task_struct *tsk);
+#else
+static inline void vtime_account_irq_exit(struct task_struct *tsk)
+{
+ /* On hard|softirq exit we always account to hard|softirq cputime */
+ vtime_account_system(tsk);
+}
+static inline void vtime_user_enter(struct task_struct *tsk) { }
+static inline void vtime_user_exit(struct task_struct *tsk) { }
+static inline void vtime_guest_enter(struct task_struct *tsk) { }
+static inline void vtime_guest_exit(struct task_struct *tsk) { }
+static inline void vtime_init_idle(struct task_struct *tsk) { }
#endif
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
@@ -23,25 +54,15 @@
static inline void irqtime_account_irq(struct task_struct *tsk) { }
#endif
-static inline void vtime_account_irq_enter(struct task_struct *tsk)
+static inline void account_irq_enter_time(struct task_struct *tsk)
{
- /*
- * Hardirq can interrupt idle task anytime. So we need vtime_account()
- * that performs the idle check in CONFIG_VIRT_CPU_ACCOUNTING.
- * Softirq can also interrupt idle task directly if it calls
- * local_bh_enable(). Such case probably don't exist but we never know.
- * Ksoftirqd is not concerned because idle time is flushed on context
- * switch. Softirqs in the end of hardirqs are also not a problem because
- * the idle time is flushed on hardirq time already.
- */
- vtime_account(tsk);
+ vtime_account_irq_enter(tsk);
irqtime_account_irq(tsk);
}
-static inline void vtime_account_irq_exit(struct task_struct *tsk)
+static inline void account_irq_exit_time(struct task_struct *tsk)
{
- /* On hard|softirq exit we always account to hard|softirq cputime */
- vtime_account_system(tsk);
+ vtime_account_irq_exit(tsk);
irqtime_account_irq(tsk);
}
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 2b58905..8afab27 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -27,7 +27,7 @@
enum {
WORK_STRUCT_PENDING_BIT = 0, /* work item is pending execution */
WORK_STRUCT_DELAYED_BIT = 1, /* work item is delayed */
- WORK_STRUCT_CWQ_BIT = 2, /* data points to cwq */
+ WORK_STRUCT_PWQ_BIT = 2, /* data points to pwq */
WORK_STRUCT_LINKED_BIT = 3, /* next work is linked to this one */
#ifdef CONFIG_DEBUG_OBJECTS_WORK
WORK_STRUCT_STATIC_BIT = 4, /* static initializer (debugobjects) */
@@ -40,7 +40,7 @@
WORK_STRUCT_PENDING = 1 << WORK_STRUCT_PENDING_BIT,
WORK_STRUCT_DELAYED = 1 << WORK_STRUCT_DELAYED_BIT,
- WORK_STRUCT_CWQ = 1 << WORK_STRUCT_CWQ_BIT,
+ WORK_STRUCT_PWQ = 1 << WORK_STRUCT_PWQ_BIT,
WORK_STRUCT_LINKED = 1 << WORK_STRUCT_LINKED_BIT,
#ifdef CONFIG_DEBUG_OBJECTS_WORK
WORK_STRUCT_STATIC = 1 << WORK_STRUCT_STATIC_BIT,
@@ -57,29 +57,36 @@
/* special cpu IDs */
WORK_CPU_UNBOUND = NR_CPUS,
- WORK_CPU_NONE = NR_CPUS + 1,
- WORK_CPU_LAST = WORK_CPU_NONE,
+ WORK_CPU_END = NR_CPUS + 1,
/*
- * Reserve 7 bits off of cwq pointer w/ debugobjects turned
- * off. This makes cwqs aligned to 256 bytes and allows 15
- * workqueue flush colors.
+ * Reserve 7 bits off of pwq pointer w/ debugobjects turned off.
+ * This makes pwqs aligned to 256 bytes and allows 15 workqueue
+ * flush colors.
*/
WORK_STRUCT_FLAG_BITS = WORK_STRUCT_COLOR_SHIFT +
WORK_STRUCT_COLOR_BITS,
- /* data contains off-queue information when !WORK_STRUCT_CWQ */
+ /* data contains off-queue information when !WORK_STRUCT_PWQ */
WORK_OFFQ_FLAG_BASE = WORK_STRUCT_FLAG_BITS,
WORK_OFFQ_CANCELING = (1 << WORK_OFFQ_FLAG_BASE),
+ /*
+ * When a work item is off queue, its high bits point to the last
+ * pool it was on. Cap at 31 bits and use the highest number to
+ * indicate that no pool is associated.
+ */
WORK_OFFQ_FLAG_BITS = 1,
- WORK_OFFQ_CPU_SHIFT = WORK_OFFQ_FLAG_BASE + WORK_OFFQ_FLAG_BITS,
+ WORK_OFFQ_POOL_SHIFT = WORK_OFFQ_FLAG_BASE + WORK_OFFQ_FLAG_BITS,
+ WORK_OFFQ_LEFT = BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT,
+ WORK_OFFQ_POOL_BITS = WORK_OFFQ_LEFT <= 31 ? WORK_OFFQ_LEFT : 31,
+ WORK_OFFQ_POOL_NONE = (1LU << WORK_OFFQ_POOL_BITS) - 1,
/* convenience constants */
WORK_STRUCT_FLAG_MASK = (1UL << WORK_STRUCT_FLAG_BITS) - 1,
WORK_STRUCT_WQ_DATA_MASK = ~WORK_STRUCT_FLAG_MASK,
- WORK_STRUCT_NO_CPU = (unsigned long)WORK_CPU_NONE << WORK_OFFQ_CPU_SHIFT,
+ WORK_STRUCT_NO_POOL = (unsigned long)WORK_OFFQ_POOL_NONE << WORK_OFFQ_POOL_SHIFT,
/* bit mask for work_busy() return values */
WORK_BUSY_PENDING = 1 << 0,
@@ -95,13 +102,16 @@
#endif
};
-#define WORK_DATA_INIT() ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU)
+#define WORK_DATA_INIT() ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL)
#define WORK_DATA_STATIC_INIT() \
- ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU | WORK_STRUCT_STATIC)
+ ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL | WORK_STRUCT_STATIC)
struct delayed_work {
struct work_struct work;
struct timer_list timer;
+
+ /* target workqueue and CPU ->timer uses to queue ->work */
+ struct workqueue_struct *wq;
int cpu;
};
@@ -426,7 +436,6 @@
extern void workqueue_set_max_active(struct workqueue_struct *wq,
int max_active);
extern bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq);
-extern unsigned int work_cpu(struct work_struct *work);
extern unsigned int work_busy(struct work_struct *work);
/*
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index 0c978384..427acab 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -99,98 +99,6 @@
TP_ARGS(name, state)
);
-#ifdef CONFIG_EVENT_POWER_TRACING_DEPRECATED
-
-/*
- * The power events are used for cpuidle & suspend (power_start, power_end)
- * and for cpufreq (power_frequency)
- */
-DECLARE_EVENT_CLASS(power,
-
- TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
-
- TP_ARGS(type, state, cpu_id),
-
- TP_STRUCT__entry(
- __field( u64, type )
- __field( u64, state )
- __field( u64, cpu_id )
- ),
-
- TP_fast_assign(
- __entry->type = type;
- __entry->state = state;
- __entry->cpu_id = cpu_id;
- ),
-
- TP_printk("type=%lu state=%lu cpu_id=%lu", (unsigned long)__entry->type,
- (unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
-);
-
-DEFINE_EVENT(power, power_start,
-
- TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
-
- TP_ARGS(type, state, cpu_id)
-);
-
-DEFINE_EVENT(power, power_frequency,
-
- TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
-
- TP_ARGS(type, state, cpu_id)
-);
-
-TRACE_EVENT(power_end,
-
- TP_PROTO(unsigned int cpu_id),
-
- TP_ARGS(cpu_id),
-
- TP_STRUCT__entry(
- __field( u64, cpu_id )
- ),
-
- TP_fast_assign(
- __entry->cpu_id = cpu_id;
- ),
-
- TP_printk("cpu_id=%lu", (unsigned long)__entry->cpu_id)
-
-);
-
-/* Deprecated dummy functions must be protected against multi-declartion */
-#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
-#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
-
-enum {
- POWER_NONE = 0,
- POWER_CSTATE = 1,
- POWER_PSTATE = 2,
-};
-#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
-
-#else /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
-
-#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
-#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
-enum {
- POWER_NONE = 0,
- POWER_CSTATE = 1,
- POWER_PSTATE = 2,
-};
-
-/* These dummy declaration have to be ripped out when the deprecated
- events get removed */
-static inline void trace_power_start(u64 type, u64 state, u64 cpuid) {};
-static inline void trace_power_end(u64 cpuid) {};
-static inline void trace_power_start_rcuidle(u64 type, u64 state, u64 cpuid) {};
-static inline void trace_power_end_rcuidle(u64 cpuid) {};
-static inline void trace_power_frequency(u64 type, u64 state, u64 cpuid) {};
-#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
-
-#endif /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
-
/*
* The clock events are used for clock enable/disable and for
* clock rate change
diff --git a/include/trace/events/ras.h b/include/trace/events/ras.h
new file mode 100644
index 0000000..88b8783
--- /dev/null
+++ b/include/trace/events/ras.h
@@ -0,0 +1,77 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ras
+
+#if !defined(_TRACE_AER_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_AER_H
+
+#include <linux/tracepoint.h>
+#include <linux/edac.h>
+
+
+/*
+ * PCIe AER Trace event
+ *
+ * These events are generated when hardware detects a corrected or
+ * uncorrected event on a PCIe device. The event report has
+ * the following structure:
+ *
+ * char * dev_name - The name of the slot where the device resides
+ * ([domain:]bus:device.function).
+ * u32 status - Either the correctable or uncorrectable register
+ * indicating what error or errors have been seen
+ * u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED
+ */
+
+#define aer_correctable_errors \
+ {BIT(0), "Receiver Error"}, \
+ {BIT(6), "Bad TLP"}, \
+ {BIT(7), "Bad DLLP"}, \
+ {BIT(8), "RELAY_NUM Rollover"}, \
+ {BIT(12), "Replay Timer Timeout"}, \
+ {BIT(13), "Advisory Non-Fatal"}
+
+#define aer_uncorrectable_errors \
+ {BIT(4), "Data Link Protocol"}, \
+ {BIT(12), "Poisoned TLP"}, \
+ {BIT(13), "Flow Control Protocol"}, \
+ {BIT(14), "Completion Timeout"}, \
+ {BIT(15), "Completer Abort"}, \
+ {BIT(16), "Unexpected Completion"}, \
+ {BIT(17), "Receiver Overflow"}, \
+ {BIT(18), "Malformed TLP"}, \
+ {BIT(19), "ECRC"}, \
+ {BIT(20), "Unsupported Request"}
+
+TRACE_EVENT(aer_event,
+ TP_PROTO(const char *dev_name,
+ const u32 status,
+ const u8 severity),
+
+ TP_ARGS(dev_name, status, severity),
+
+ TP_STRUCT__entry(
+ __string( dev_name, dev_name )
+ __field( u32, status )
+ __field( u8, severity )
+ ),
+
+ TP_fast_assign(
+ __assign_str(dev_name, dev_name);
+ __entry->status = status;
+ __entry->severity = severity;
+ ),
+
+ TP_printk("%s PCIe Bus Error: severity=%s, %s\n",
+ __get_str(dev_name),
+ __entry->severity == HW_EVENT_ERR_CORRECTED ? "Corrected" :
+ __entry->severity == HW_EVENT_ERR_FATAL ?
+ "Fatal" : "Uncorrected",
+ __entry->severity == HW_EVENT_ERR_CORRECTED ?
+ __print_flags(__entry->status, "|", aer_correctable_errors) :
+ __print_flags(__entry->status, "|", aer_uncorrectable_errors))
+);
+
+#endif /* _TRACE_AER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index d4f559b..1918e83 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -44,8 +44,10 @@
* of a new grace period or the end of an old grace period ("cpustart"
* and "cpuend", respectively), a CPU passing through a quiescent
* state ("cpuqs"), a CPU coming online or going offline ("cpuonl"
- * and "cpuofl", respectively), and a CPU being kicked for being too
- * long in dyntick-idle mode ("kick").
+ * and "cpuofl", respectively), a CPU being kicked for being too
+ * long in dyntick-idle mode ("kick"), a CPU accelerating its new
+ * callbacks to RCU_NEXT_READY_TAIL ("AccReadyCB"), and a CPU
+ * accelerating its new callbacks to RCU_WAIT_TAIL ("AccWaitCB").
*/
TRACE_EVENT(rcu_grace_period,
@@ -393,7 +395,7 @@
*/
TRACE_EVENT(rcu_batch_start,
- TP_PROTO(char *rcuname, long qlen_lazy, long qlen, int blimit),
+ TP_PROTO(char *rcuname, long qlen_lazy, long qlen, long blimit),
TP_ARGS(rcuname, qlen_lazy, qlen, blimit),
@@ -401,7 +403,7 @@
__field(char *, rcuname)
__field(long, qlen_lazy)
__field(long, qlen)
- __field(int, blimit)
+ __field(long, blimit)
),
TP_fast_assign(
@@ -411,7 +413,7 @@
__entry->blimit = blimit;
),
- TP_printk("%s CBs=%ld/%ld bl=%d",
+ TP_printk("%s CBs=%ld/%ld bl=%ld",
__entry->rcuname, __entry->qlen_lazy, __entry->qlen,
__entry->blimit)
);
@@ -523,22 +525,30 @@
*/
TRACE_EVENT(rcu_torture_read,
- TP_PROTO(char *rcutorturename, struct rcu_head *rhp),
+ TP_PROTO(char *rcutorturename, struct rcu_head *rhp,
+ unsigned long secs, unsigned long c_old, unsigned long c),
- TP_ARGS(rcutorturename, rhp),
+ TP_ARGS(rcutorturename, rhp, secs, c_old, c),
TP_STRUCT__entry(
__field(char *, rcutorturename)
__field(struct rcu_head *, rhp)
+ __field(unsigned long, secs)
+ __field(unsigned long, c_old)
+ __field(unsigned long, c)
),
TP_fast_assign(
__entry->rcutorturename = rcutorturename;
__entry->rhp = rhp;
+ __entry->secs = secs;
+ __entry->c_old = c_old;
+ __entry->c = c;
),
- TP_printk("%s torture read %p",
- __entry->rcutorturename, __entry->rhp)
+ TP_printk("%s torture read %p %luus c: %lu %lu",
+ __entry->rcutorturename, __entry->rhp,
+ __entry->secs, __entry->c_old, __entry->c)
);
/*
@@ -608,7 +618,8 @@
#define trace_rcu_invoke_kfree_callback(rcuname, rhp, offset) do { } while (0)
#define trace_rcu_batch_end(rcuname, callbacks_invoked, cb, nr, iit, risk) \
do { } while (0)
-#define trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#define trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
+ do { } while (0)
#define trace_rcu_barrier(name, s, cpu, cnt, done) do { } while (0)
#endif /* #else #ifdef CONFIG_RCU_TRACE */
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index f28d1b6..bf0e18b 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -27,7 +27,7 @@
/**
* workqueue_queue_work - called when a work gets queued
* @req_cpu: the requested cpu
- * @cwq: pointer to struct cpu_workqueue_struct
+ * @pwq: pointer to struct pool_workqueue
* @work: pointer to struct work_struct
*
* This event occurs when a work is queued immediately or once a
@@ -36,10 +36,10 @@
*/
TRACE_EVENT(workqueue_queue_work,
- TP_PROTO(unsigned int req_cpu, struct cpu_workqueue_struct *cwq,
+ TP_PROTO(unsigned int req_cpu, struct pool_workqueue *pwq,
struct work_struct *work),
- TP_ARGS(req_cpu, cwq, work),
+ TP_ARGS(req_cpu, pwq, work),
TP_STRUCT__entry(
__field( void *, work )
@@ -52,9 +52,9 @@
TP_fast_assign(
__entry->work = work;
__entry->function = work->func;
- __entry->workqueue = cwq->wq;
+ __entry->workqueue = pwq->wq;
__entry->req_cpu = req_cpu;
- __entry->cpu = cwq->pool->gcwq->cpu;
+ __entry->cpu = pwq->pool->cpu;
),
TP_printk("work struct=%p function=%pf workqueue=%p req_cpu=%u cpu=%u",
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index e6e5d4b..7f2360a 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -115,6 +115,7 @@
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+ * For ARM: See Documentation/virtual/kvm/api.txt
*/
union {
__u32 irq;
@@ -635,6 +636,7 @@
#define KVM_CAP_IRQFD_RESAMPLE 82
#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
#define KVM_CAP_PPC_HTAB_FD 84
+#define KVM_CAP_ARM_PSCI 87
#ifdef KVM_CAP_IRQ_ROUTING
@@ -764,6 +766,11 @@
#define KVM_REG_SIZE_U512 0x0060000000000000ULL
#define KVM_REG_SIZE_U1024 0x0070000000000000ULL
+struct kvm_reg_list {
+ __u64 n; /* number of regs */
+ __u64 reg[0];
+};
+
struct kvm_one_reg {
__u64 id;
__u64 addr;
@@ -932,6 +939,8 @@
#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg)
/* VM is being stopped by host */
#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad)
+#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init)
+#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 4f63c05..9fa9c62 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -579,7 +579,8 @@
* { u32 size;
* char data[size];}&& PERF_SAMPLE_RAW
*
- * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+ * { u64 nr;
+ * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
*
* { u64 abi; # enum perf_sample_regs_abi
* u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
diff --git a/init/Kconfig b/init/Kconfig
index be8b7f5..7000d96 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -20,12 +20,8 @@
bool
depends on !UML
-config HAVE_IRQ_WORK
- bool
-
config IRQ_WORK
bool
- depends on HAVE_IRQ_WORK
config BUILDTIME_EXTABLE_SORT
bool
@@ -326,10 +322,13 @@
menu "CPU/Task time and stats accounting"
+config VIRT_CPU_ACCOUNTING
+ bool
+
choice
prompt "Cputime accounting"
default TICK_CPU_ACCOUNTING if !PPC64
- default VIRT_CPU_ACCOUNTING if PPC64
+ default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
# Kind of a stub config for the pure tick based cputime accounting
config TICK_CPU_ACCOUNTING
@@ -342,9 +341,10 @@
If unsure, say Y.
-config VIRT_CPU_ACCOUNTING
+config VIRT_CPU_ACCOUNTING_NATIVE
bool "Deterministic task and CPU time accounting"
depends on HAVE_VIRT_CPU_ACCOUNTING
+ select VIRT_CPU_ACCOUNTING
help
Select this option to enable more accurate task and CPU time
accounting. This is done by reading a CPU counter on each
@@ -354,6 +354,23 @@
this also enables accounting of stolen time on logically-partitioned
systems.
+config VIRT_CPU_ACCOUNTING_GEN
+ bool "Full dynticks CPU time accounting"
+ depends on HAVE_CONTEXT_TRACKING && 64BIT
+ select VIRT_CPU_ACCOUNTING
+ select CONTEXT_TRACKING
+ help
+ Select this option to enable task and CPU time accounting on full
+ dynticks systems. This accounting is implemented by watching every
+ kernel-user boundaries using the context tracking subsystem.
+ The accounting is thus performed at the expense of some significant
+ overhead.
+
+ For now this is only useful if you are working on the full
+ dynticks subsystem development.
+
+ If unsure, say N.
+
config IRQ_TIME_ACCOUNTING
bool "Fine granularity task level IRQ time accounting"
depends on HAVE_IRQ_TIME_ACCOUNTING
@@ -453,7 +470,7 @@
config TREE_PREEMPT_RCU
bool "Preemptible tree-based hierarchical RCU"
- depends on PREEMPT && SMP
+ depends on PREEMPT
help
This option selects the RCU implementation that is
designed for very large SMP systems with hundreds or
@@ -461,6 +478,8 @@
is also required. It also scales down nicely to
smaller systems.
+ Select this option if you are unsure.
+
config TINY_RCU
bool "UP-only small-memory-footprint RCU"
depends on !PREEMPT && !SMP
@@ -486,6 +505,14 @@
This option enables preemptible-RCU code that is common between
the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations.
+config RCU_STALL_COMMON
+ def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE )
+ help
+ This option enables RCU CPU stall code that is common between
+ the TINY and TREE variants of RCU. The purpose is to allow
+ the tiny variants to disable RCU CPU stall warnings, while
+ making these warnings mandatory for the tree variants.
+
config CONTEXT_TRACKING
bool
@@ -1263,6 +1290,7 @@
config PRINTK
default y
bool "Enable support for printk" if EXPERT
+ select IRQ_WORK
help
This option enables normal printk support. Removing it
eliminates most of the message strings from the kernel image
diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c
index f9acf71..a32ec1c 100644
--- a/init/do_mounts_initrd.c
+++ b/init/do_mounts_initrd.c
@@ -61,6 +61,9 @@
sys_mkdir("/old", 0700);
sys_chdir("/old");
+ /* try loading default modules from initrd */
+ load_default_modules();
+
/*
* In case that a resume from disk is carried out by linuxrc or one of
* its children, we need to tell the freezer not to wait for us.
diff --git a/init/init_task.c b/init/init_task.c
index 8b2f399..ba0a7f36 100644
--- a/init/init_task.c
+++ b/init/init_task.c
@@ -2,6 +2,8 @@
#include <linux/export.h>
#include <linux/mqueue.h>
#include <linux/sched.h>
+#include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
diff --git a/init/initramfs.c b/init/initramfs.c
index 84c6bf1..a67ef9d 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -592,7 +592,7 @@
initrd_end - initrd_start);
if (!err) {
free_initrd();
- return 0;
+ goto done;
} else {
clean_rootfs();
unpack_to_rootfs(__initramfs_start, __initramfs_size);
@@ -607,6 +607,7 @@
sys_close(fd);
free_initrd();
}
+ done:
#else
printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
@@ -615,6 +616,11 @@
printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
free_initrd();
#endif
+ /*
+ * Try loading default modules from initramfs. This gives
+ * us a chance to load before device_initcalls.
+ */
+ load_default_modules();
}
return 0;
}
diff --git a/init/main.c b/init/main.c
index cee4b5c..63534a1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -70,6 +70,8 @@
#include <linux/perf_event.h>
#include <linux/file.h>
#include <linux/ptrace.h>
+#include <linux/blkdev.h>
+#include <linux/elevator.h>
#include <asm/io.h>
#include <asm/bugs.h>
@@ -794,6 +796,17 @@
do_one_initcall(*fn);
}
+/*
+ * This function requests modules which should be loaded by default and is
+ * called twice right after initrd is mounted and right before init is
+ * exec'd. If such modules are on either initrd or rootfs, they will be
+ * loaded before control is passed to userland.
+ */
+void __init load_default_modules(void)
+{
+ load_default_elevator_module();
+}
+
static int run_init_process(const char *init_filename)
{
argv_init[0] = init_filename;
@@ -900,4 +913,7 @@
* we're essentially up and running. Get rid of the
* initmem segments and start the user-mode stuff..
*/
+
+ /* rootfs is available now, try loading default modules */
+ load_default_modules();
}
diff --git a/kernel/acct.c b/kernel/acct.c
index 051e071..e8b1627 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -566,6 +566,7 @@
void acct_collect(long exitcode, int group_dead)
{
struct pacct_struct *pacct = ¤t->signal->pacct;
+ cputime_t utime, stime;
unsigned long vsize = 0;
if (group_dead && current->mm) {
@@ -593,8 +594,9 @@
pacct->ac_flag |= ACORE;
if (current->flags & PF_SIGNALED)
pacct->ac_flag |= AXSIG;
- pacct->ac_utime += current->utime;
- pacct->ac_stime += current->stime;
+ task_cputime(current, &utime, &stime);
+ pacct->ac_utime += utime;
+ pacct->ac_stime += stime;
pacct->ac_minflt += current->min_flt;
pacct->ac_majflt += current->maj_flt;
spin_unlock_irq(¤t->sighand->siglock);
diff --git a/kernel/async.c b/kernel/async.c
index 6f34904..8ddee2c 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -57,65 +57,52 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include "workqueue_internal.h"
+
static async_cookie_t next_cookie = 1;
-#define MAX_WORK 32768
+#define MAX_WORK 32768
+#define ASYNC_COOKIE_MAX ULLONG_MAX /* infinity cookie */
-static LIST_HEAD(async_pending);
-static ASYNC_DOMAIN(async_running);
-static LIST_HEAD(async_domains);
+static LIST_HEAD(async_global_pending); /* pending from all registered doms */
+static ASYNC_DOMAIN(async_dfl_domain);
static DEFINE_SPINLOCK(async_lock);
-static DEFINE_MUTEX(async_register_mutex);
struct async_entry {
- struct list_head list;
+ struct list_head domain_list;
+ struct list_head global_list;
struct work_struct work;
async_cookie_t cookie;
async_func_ptr *func;
void *data;
- struct async_domain *running;
+ struct async_domain *domain;
};
static DECLARE_WAIT_QUEUE_HEAD(async_done);
static atomic_t entry_count;
-
-/*
- * MUST be called with the lock held!
- */
-static async_cookie_t __lowest_in_progress(struct async_domain *running)
+static async_cookie_t lowest_in_progress(struct async_domain *domain)
{
- async_cookie_t first_running = next_cookie; /* infinity value */
- async_cookie_t first_pending = next_cookie; /* ditto */
- struct async_entry *entry;
-
- /*
- * Both running and pending lists are sorted but not disjoint.
- * Take the first cookies from both and return the min.
- */
- if (!list_empty(&running->domain)) {
- entry = list_first_entry(&running->domain, typeof(*entry), list);
- first_running = entry->cookie;
- }
-
- list_for_each_entry(entry, &async_pending, list) {
- if (entry->running == running) {
- first_pending = entry->cookie;
- break;
- }
- }
-
- return min(first_running, first_pending);
-}
-
-static async_cookie_t lowest_in_progress(struct async_domain *running)
-{
+ struct async_entry *first = NULL;
+ async_cookie_t ret = ASYNC_COOKIE_MAX;
unsigned long flags;
- async_cookie_t ret;
spin_lock_irqsave(&async_lock, flags);
- ret = __lowest_in_progress(running);
+
+ if (domain) {
+ if (!list_empty(&domain->pending))
+ first = list_first_entry(&domain->pending,
+ struct async_entry, domain_list);
+ } else {
+ if (!list_empty(&async_global_pending))
+ first = list_first_entry(&async_global_pending,
+ struct async_entry, global_list);
+ }
+
+ if (first)
+ ret = first->cookie;
+
spin_unlock_irqrestore(&async_lock, flags);
return ret;
}
@@ -127,20 +114,10 @@
{
struct async_entry *entry =
container_of(work, struct async_entry, work);
- struct async_entry *pos;
unsigned long flags;
ktime_t uninitialized_var(calltime), delta, rettime;
- struct async_domain *running = entry->running;
- /* 1) move self to the running queue, make sure it stays sorted */
- spin_lock_irqsave(&async_lock, flags);
- list_for_each_entry_reverse(pos, &running->domain, list)
- if (entry->cookie < pos->cookie)
- break;
- list_move_tail(&entry->list, &pos->list);
- spin_unlock_irqrestore(&async_lock, flags);
-
- /* 2) run (and print duration) */
+ /* 1) run (and print duration) */
if (initcall_debug && system_state == SYSTEM_BOOTING) {
printk(KERN_DEBUG "calling %lli_%pF @ %i\n",
(long long)entry->cookie,
@@ -157,23 +134,22 @@
(long long)ktime_to_ns(delta) >> 10);
}
- /* 3) remove self from the running queue */
+ /* 2) remove self from the pending queues */
spin_lock_irqsave(&async_lock, flags);
- list_del(&entry->list);
- if (running->registered && --running->count == 0)
- list_del_init(&running->node);
+ list_del_init(&entry->domain_list);
+ list_del_init(&entry->global_list);
- /* 4) free the entry */
+ /* 3) free the entry */
kfree(entry);
atomic_dec(&entry_count);
spin_unlock_irqrestore(&async_lock, flags);
- /* 5) wake up any waiters */
+ /* 4) wake up any waiters */
wake_up(&async_done);
}
-static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct async_domain *running)
+static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct async_domain *domain)
{
struct async_entry *entry;
unsigned long flags;
@@ -196,16 +172,22 @@
ptr(data, newcookie);
return newcookie;
}
+ INIT_LIST_HEAD(&entry->domain_list);
+ INIT_LIST_HEAD(&entry->global_list);
INIT_WORK(&entry->work, async_run_entry_fn);
entry->func = ptr;
entry->data = data;
- entry->running = running;
+ entry->domain = domain;
spin_lock_irqsave(&async_lock, flags);
+
+ /* allocate cookie and queue */
newcookie = entry->cookie = next_cookie++;
- list_add_tail(&entry->list, &async_pending);
- if (running->registered && running->count++ == 0)
- list_add_tail(&running->node, &async_domains);
+
+ list_add_tail(&entry->domain_list, &domain->pending);
+ if (domain->registered)
+ list_add_tail(&entry->global_list, &async_global_pending);
+
atomic_inc(&entry_count);
spin_unlock_irqrestore(&async_lock, flags);
@@ -228,7 +210,7 @@
*/
async_cookie_t async_schedule(async_func_ptr *ptr, void *data)
{
- return __async_schedule(ptr, data, &async_running);
+ return __async_schedule(ptr, data, &async_dfl_domain);
}
EXPORT_SYMBOL_GPL(async_schedule);
@@ -236,18 +218,18 @@
* async_schedule_domain - schedule a function for asynchronous execution within a certain domain
* @ptr: function to execute asynchronously
* @data: data pointer to pass to the function
- * @running: running list for the domain
+ * @domain: the domain
*
* Returns an async_cookie_t that may be used for checkpointing later.
- * @running may be used in the async_synchronize_*_domain() functions
- * to wait within a certain synchronization domain rather than globally.
- * A synchronization domain is specified via the running queue @running to use.
- * Note: This function may be called from atomic or non-atomic contexts.
+ * @domain may be used in the async_synchronize_*_domain() functions to
+ * wait within a certain synchronization domain rather than globally. A
+ * synchronization domain is specified via @domain. Note: This function
+ * may be called from atomic or non-atomic contexts.
*/
async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data,
- struct async_domain *running)
+ struct async_domain *domain)
{
- return __async_schedule(ptr, data, running);
+ return __async_schedule(ptr, data, domain);
}
EXPORT_SYMBOL_GPL(async_schedule_domain);
@@ -258,18 +240,7 @@
*/
void async_synchronize_full(void)
{
- mutex_lock(&async_register_mutex);
- do {
- struct async_domain *domain = NULL;
-
- spin_lock_irq(&async_lock);
- if (!list_empty(&async_domains))
- domain = list_first_entry(&async_domains, typeof(*domain), node);
- spin_unlock_irq(&async_lock);
-
- async_synchronize_cookie_domain(next_cookie, domain);
- } while (!list_empty(&async_domains));
- mutex_unlock(&async_register_mutex);
+ async_synchronize_full_domain(NULL);
}
EXPORT_SYMBOL_GPL(async_synchronize_full);
@@ -284,51 +255,45 @@
*/
void async_unregister_domain(struct async_domain *domain)
{
- mutex_lock(&async_register_mutex);
spin_lock_irq(&async_lock);
- WARN_ON(!domain->registered || !list_empty(&domain->node) ||
- !list_empty(&domain->domain));
+ WARN_ON(!domain->registered || !list_empty(&domain->pending));
domain->registered = 0;
spin_unlock_irq(&async_lock);
- mutex_unlock(&async_register_mutex);
}
EXPORT_SYMBOL_GPL(async_unregister_domain);
/**
* async_synchronize_full_domain - synchronize all asynchronous function within a certain domain
- * @domain: running list to synchronize on
+ * @domain: the domain to synchronize
*
* This function waits until all asynchronous function calls for the
- * synchronization domain specified by the running list @domain have been done.
+ * synchronization domain specified by @domain have been done.
*/
void async_synchronize_full_domain(struct async_domain *domain)
{
- async_synchronize_cookie_domain(next_cookie, domain);
+ async_synchronize_cookie_domain(ASYNC_COOKIE_MAX, domain);
}
EXPORT_SYMBOL_GPL(async_synchronize_full_domain);
/**
* async_synchronize_cookie_domain - synchronize asynchronous function calls within a certain domain with cookie checkpointing
* @cookie: async_cookie_t to use as checkpoint
- * @running: running list to synchronize on
+ * @domain: the domain to synchronize (%NULL for all registered domains)
*
* This function waits until all asynchronous function calls for the
- * synchronization domain specified by running list @running submitted
- * prior to @cookie have been done.
+ * synchronization domain specified by @domain submitted prior to @cookie
+ * have been done.
*/
-void async_synchronize_cookie_domain(async_cookie_t cookie, struct async_domain *running)
+void async_synchronize_cookie_domain(async_cookie_t cookie, struct async_domain *domain)
{
ktime_t uninitialized_var(starttime), delta, endtime;
- if (!running)
- return;
-
if (initcall_debug && system_state == SYSTEM_BOOTING) {
printk(KERN_DEBUG "async_waiting @ %i\n", task_pid_nr(current));
starttime = ktime_get();
}
- wait_event(async_done, lowest_in_progress(running) >= cookie);
+ wait_event(async_done, lowest_in_progress(domain) >= cookie);
if (initcall_debug && system_state == SYSTEM_BOOTING) {
endtime = ktime_get();
@@ -350,6 +315,18 @@
*/
void async_synchronize_cookie(async_cookie_t cookie)
{
- async_synchronize_cookie_domain(cookie, &async_running);
+ async_synchronize_cookie_domain(cookie, &async_dfl_domain);
}
EXPORT_SYMBOL_GPL(async_synchronize_cookie);
+
+/**
+ * current_is_async - is %current an async worker task?
+ *
+ * Returns %true if %current is an async worker task.
+ */
+bool current_is_async(void)
+{
+ struct worker *worker = current_wq_worker();
+
+ return worker && worker->current_func == async_run_entry_fn;
+}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 4855892..b5c6432 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -52,7 +52,7 @@
#include <linux/module.h>
#include <linux/delayacct.h>
#include <linux/cgroupstats.h>
-#include <linux/hash.h>
+#include <linux/hashtable.h>
#include <linux/namei.h>
#include <linux/pid_namespace.h>
#include <linux/idr.h>
@@ -376,22 +376,18 @@
* account cgroups in empty hierarchies.
*/
#define CSS_SET_HASH_BITS 7
-#define CSS_SET_TABLE_SIZE (1 << CSS_SET_HASH_BITS)
-static struct hlist_head css_set_table[CSS_SET_TABLE_SIZE];
+static DEFINE_HASHTABLE(css_set_table, CSS_SET_HASH_BITS);
-static struct hlist_head *css_set_hash(struct cgroup_subsys_state *css[])
+static unsigned long css_set_hash(struct cgroup_subsys_state *css[])
{
int i;
- int index;
- unsigned long tmp = 0UL;
+ unsigned long key = 0UL;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++)
- tmp += (unsigned long)css[i];
- tmp = (tmp >> 16) ^ tmp;
+ key += (unsigned long)css[i];
+ key = (key >> 16) ^ key;
- index = hash_long(tmp, CSS_SET_HASH_BITS);
-
- return &css_set_table[index];
+ return key;
}
/* We don't maintain the lists running through each css_set to its
@@ -418,7 +414,7 @@
}
/* This css_set is dead. unlink it and release cgroup refcounts */
- hlist_del(&cg->hlist);
+ hash_del(&cg->hlist);
css_set_count--;
list_for_each_entry_safe(link, saved_link, &cg->cg_links,
@@ -426,12 +422,20 @@
struct cgroup *cgrp = link->cgrp;
list_del(&link->cg_link_list);
list_del(&link->cgrp_link_list);
+
+ /*
+ * We may not be holding cgroup_mutex, and if cgrp->count is
+ * dropped to 0 the cgroup can be destroyed at any time, hence
+ * rcu_read_lock is used to keep it alive.
+ */
+ rcu_read_lock();
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
+ rcu_read_unlock();
kfree(link);
}
@@ -550,9 +554,9 @@
{
int i;
struct cgroupfs_root *root = cgrp->root;
- struct hlist_head *hhead;
struct hlist_node *node;
struct css_set *cg;
+ unsigned long key;
/*
* Build the set of subsystem state objects that we want to see in the
@@ -572,8 +576,8 @@
}
}
- hhead = css_set_hash(template);
- hlist_for_each_entry(cg, node, hhead, hlist) {
+ key = css_set_hash(template);
+ hash_for_each_possible(css_set_table, cg, node, hlist, key) {
if (!compare_css_sets(cg, oldcg, cgrp, template))
continue;
@@ -657,8 +661,8 @@
struct list_head tmp_cg_links;
- struct hlist_head *hhead;
struct cg_cgroup_link *link;
+ unsigned long key;
/* First see if we already have a cgroup group that matches
* the desired set */
@@ -704,8 +708,8 @@
css_set_count++;
/* Add this cgroup group to the hash table */
- hhead = css_set_hash(res->subsys);
- hlist_add_head(&res->hlist, hhead);
+ key = css_set_hash(res->subsys);
+ hash_add(css_set_table, &res->hlist, key);
write_unlock(&css_set_lock);
@@ -856,47 +860,54 @@
return inode;
}
+static void cgroup_free_fn(struct work_struct *work)
+{
+ struct cgroup *cgrp = container_of(work, struct cgroup, free_work);
+ struct cgroup_subsys *ss;
+
+ mutex_lock(&cgroup_mutex);
+ /*
+ * Release the subsystem state objects.
+ */
+ for_each_subsys(cgrp->root, ss)
+ ss->css_free(cgrp);
+
+ cgrp->root->number_of_cgroups--;
+ mutex_unlock(&cgroup_mutex);
+
+ /*
+ * Drop the active superblock reference that we took when we
+ * created the cgroup
+ */
+ deactivate_super(cgrp->root->sb);
+
+ /*
+ * if we're getting rid of the cgroup, refcount should ensure
+ * that there are no pidlists left.
+ */
+ BUG_ON(!list_empty(&cgrp->pidlists));
+
+ simple_xattrs_free(&cgrp->xattrs);
+
+ ida_simple_remove(&cgrp->root->cgroup_ida, cgrp->id);
+ kfree(cgrp);
+}
+
+static void cgroup_free_rcu(struct rcu_head *head)
+{
+ struct cgroup *cgrp = container_of(head, struct cgroup, rcu_head);
+
+ schedule_work(&cgrp->free_work);
+}
+
static void cgroup_diput(struct dentry *dentry, struct inode *inode)
{
/* is dentry a directory ? if so, kfree() associated cgroup */
if (S_ISDIR(inode->i_mode)) {
struct cgroup *cgrp = dentry->d_fsdata;
- struct cgroup_subsys *ss;
+
BUG_ON(!(cgroup_is_removed(cgrp)));
- /* It's possible for external users to be holding css
- * reference counts on a cgroup; css_put() needs to
- * be able to access the cgroup after decrementing
- * the reference count in order to know if it needs to
- * queue the cgroup to be handled by the release
- * agent */
- synchronize_rcu();
-
- mutex_lock(&cgroup_mutex);
- /*
- * Release the subsystem state objects.
- */
- for_each_subsys(cgrp->root, ss)
- ss->css_free(cgrp);
-
- cgrp->root->number_of_cgroups--;
- mutex_unlock(&cgroup_mutex);
-
- /*
- * Drop the active superblock reference that we took when we
- * created the cgroup
- */
- deactivate_super(cgrp->root->sb);
-
- /*
- * if we're getting rid of the cgroup, refcount should ensure
- * that there are no pidlists left.
- */
- BUG_ON(!list_empty(&cgrp->pidlists));
-
- simple_xattrs_free(&cgrp->xattrs);
-
- ida_simple_remove(&cgrp->root->cgroup_ida, cgrp->id);
- kfree_rcu(cgrp, rcu_head);
+ call_rcu(&cgrp->rcu_head, cgroup_free_rcu);
} else {
struct cfent *cfe = __d_cfe(dentry);
struct cgroup *cgrp = dentry->d_parent->d_fsdata;
@@ -925,13 +936,17 @@
dput(parent);
}
-static int cgroup_rm_file(struct cgroup *cgrp, const struct cftype *cft)
+static void cgroup_rm_file(struct cgroup *cgrp, const struct cftype *cft)
{
struct cfent *cfe;
lockdep_assert_held(&cgrp->dentry->d_inode->i_mutex);
lockdep_assert_held(&cgroup_mutex);
+ /*
+ * If we're doing cleanup due to failure of cgroup_create(),
+ * the corresponding @cfe may not exist.
+ */
list_for_each_entry(cfe, &cgrp->files, node) {
struct dentry *d = cfe->dentry;
@@ -944,9 +959,8 @@
list_del_init(&cfe->node);
dput(d);
- return 0;
+ break;
}
- return -ENOENT;
}
/**
@@ -1083,7 +1097,6 @@
}
}
root->subsys_mask = root->actual_subsys_mask = final_subsys_mask;
- synchronize_rcu();
return 0;
}
@@ -1393,6 +1406,7 @@
INIT_LIST_HEAD(&cgrp->allcg_node);
INIT_LIST_HEAD(&cgrp->release_list);
INIT_LIST_HEAD(&cgrp->pidlists);
+ INIT_WORK(&cgrp->free_work, cgroup_free_fn);
mutex_init(&cgrp->pidlist_mutex);
INIT_LIST_HEAD(&cgrp->event_list);
spin_lock_init(&cgrp->event_list_lock);
@@ -1597,6 +1611,8 @@
struct cgroupfs_root *existing_root;
const struct cred *cred;
int i;
+ struct hlist_node *node;
+ struct css_set *cg;
BUG_ON(sb->s_root != NULL);
@@ -1650,14 +1666,8 @@
/* Link the top cgroup in this hierarchy into all
* the css_set objects */
write_lock(&css_set_lock);
- for (i = 0; i < CSS_SET_TABLE_SIZE; i++) {
- struct hlist_head *hhead = &css_set_table[i];
- struct hlist_node *node;
- struct css_set *cg;
-
- hlist_for_each_entry(cg, node, hhead, hlist)
- link_css_set(&tmp_cg_links, cg, root_cgrp);
- }
+ hash_for_each(css_set_table, i, node, cg, hlist)
+ link_css_set(&tmp_cg_links, cg, root_cgrp);
write_unlock(&css_set_lock);
free_cg_links(&tmp_cg_links);
@@ -1773,7 +1783,7 @@
rcu_lockdep_assert(rcu_read_lock_held() || cgroup_lock_is_held(),
"cgroup_path() called without proper locking");
- if (!dentry || cgrp == dummytop) {
+ if (cgrp == dummytop) {
/*
* Inactive subsystems have no dentry for their root
* cgroup
@@ -1982,7 +1992,6 @@
ss->attach(cgrp, &tset);
}
- synchronize_rcu();
out:
if (retval) {
for_each_subsys(root, ss) {
@@ -2151,7 +2160,6 @@
/*
* step 5: success! and cleanup
*/
- synchronize_rcu();
retval = 0;
out_put_css_set_refs:
if (retval) {
@@ -2769,14 +2777,14 @@
if ((cft->flags & CFTYPE_ONLY_ON_ROOT) && cgrp->parent)
continue;
- if (is_add)
+ if (is_add) {
err = cgroup_add_file(cgrp, subsys, cft);
- else
- err = cgroup_rm_file(cgrp, cft);
- if (err) {
- pr_warning("cgroup_addrm_files: failed to %s %s, err=%d\n",
- is_add ? "add" : "remove", cft->name, err);
+ if (err)
+ pr_warn("cgroup_addrm_files: failed to add %s, err=%d\n",
+ cft->name, err);
ret = err;
+ } else {
+ cgroup_rm_file(cgrp, cft);
}
}
return ret;
@@ -3017,6 +3025,32 @@
}
EXPORT_SYMBOL_GPL(cgroup_next_descendant_pre);
+/**
+ * cgroup_rightmost_descendant - return the rightmost descendant of a cgroup
+ * @pos: cgroup of interest
+ *
+ * Return the rightmost descendant of @pos. If there's no descendant,
+ * @pos is returned. This can be used during pre-order traversal to skip
+ * subtree of @pos.
+ */
+struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos)
+{
+ struct cgroup *last, *tmp;
+
+ WARN_ON_ONCE(!rcu_read_lock_held());
+
+ do {
+ last = pos;
+ /* ->prev isn't RCU safe, walk ->next till the end */
+ pos = NULL;
+ list_for_each_entry_rcu(tmp, &last->children, sibling)
+ pos = tmp;
+ } while (pos);
+
+ return last;
+}
+EXPORT_SYMBOL_GPL(cgroup_rightmost_descendant);
+
static struct cgroup *cgroup_leftmost_descendant(struct cgroup *pos)
{
struct cgroup *last;
@@ -3752,8 +3786,13 @@
remove);
struct cgroup *cgrp = event->cgrp;
+ remove_wait_queue(event->wqh, &event->wait);
+
event->cft->unregister_event(cgrp, event->cft, event->eventfd);
+ /* Notify userspace the event is going away. */
+ eventfd_signal(event->eventfd, 1);
+
eventfd_ctx_put(event->eventfd);
kfree(event);
dput(cgrp->dentry);
@@ -3773,15 +3812,25 @@
unsigned long flags = (unsigned long)key;
if (flags & POLLHUP) {
- __remove_wait_queue(event->wqh, &event->wait);
- spin_lock(&cgrp->event_list_lock);
- list_del_init(&event->list);
- spin_unlock(&cgrp->event_list_lock);
/*
- * We are in atomic context, but cgroup_event_remove() may
- * sleep, so we have to call it in workqueue.
+ * If the event has been detached at cgroup removal, we
+ * can simply return knowing the other side will cleanup
+ * for us.
+ *
+ * We can't race against event freeing since the other
+ * side will require wqh->lock via remove_wait_queue(),
+ * which we hold.
*/
- schedule_work(&event->remove);
+ spin_lock(&cgrp->event_list_lock);
+ if (!list_empty(&event->list)) {
+ list_del_init(&event->list);
+ /*
+ * We are in atomic context, but cgroup_event_remove()
+ * may sleep, so we have to call it in workqueue.
+ */
+ schedule_work(&event->remove);
+ }
+ spin_unlock(&cgrp->event_list_lock);
}
return 0;
@@ -3807,6 +3856,7 @@
const char *buffer)
{
struct cgroup_event *event = NULL;
+ struct cgroup *cgrp_cfile;
unsigned int efd, cfd;
struct file *efile = NULL;
struct file *cfile = NULL;
@@ -3862,6 +3912,16 @@
goto fail;
}
+ /*
+ * The file to be monitored must be in the same cgroup as
+ * cgroup.event_control is.
+ */
+ cgrp_cfile = __d_cgrp(cfile->f_dentry->d_parent);
+ if (cgrp_cfile != cgrp) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
if (!event->cft->register_event || !event->cft->unregister_event) {
ret = -EINVAL;
goto fail;
@@ -4135,6 +4195,9 @@
init_cgroup_housekeeping(cgrp);
+ dentry->d_fsdata = cgrp;
+ cgrp->dentry = dentry;
+
cgrp->parent = parent;
cgrp->root = parent->root;
cgrp->top_cgroup = parent->top_cgroup;
@@ -4172,8 +4235,6 @@
lockdep_assert_held(&dentry->d_inode->i_mutex);
/* allocation complete, commit to creation */
- dentry->d_fsdata = cgrp;
- cgrp->dentry = dentry;
list_add_tail(&cgrp->allcg_node, &root->allcg_list);
list_add_tail_rcu(&cgrp->sibling, &cgrp->parent->children);
root->number_of_cgroups++;
@@ -4340,20 +4401,14 @@
/*
* Unregister events and notify userspace.
* Notify userspace about cgroup removing only after rmdir of cgroup
- * directory to avoid race between userspace and kernelspace. Use
- * a temporary list to avoid a deadlock with cgroup_event_wake(). Since
- * cgroup_event_wake() is called with the wait queue head locked,
- * remove_wait_queue() cannot be called while holding event_list_lock.
+ * directory to avoid race between userspace and kernelspace.
*/
spin_lock(&cgrp->event_list_lock);
- list_splice_init(&cgrp->event_list, &tmp_list);
- spin_unlock(&cgrp->event_list_lock);
- list_for_each_entry_safe(event, tmp, &tmp_list, list) {
+ list_for_each_entry_safe(event, tmp, &cgrp->event_list, list) {
list_del_init(&event->list);
- remove_wait_queue(event->wqh, &event->wait);
- eventfd_signal(event->eventfd, 1);
schedule_work(&event->remove);
}
+ spin_unlock(&cgrp->event_list_lock);
return 0;
}
@@ -4438,6 +4493,9 @@
{
struct cgroup_subsys_state *css;
int i, ret;
+ struct hlist_node *node, *tmp;
+ struct css_set *cg;
+ unsigned long key;
/* check name and function validity */
if (ss->name == NULL || strlen(ss->name) > MAX_CGROUP_TYPE_NAMELEN ||
@@ -4503,23 +4561,17 @@
* this is all done under the css_set_lock.
*/
write_lock(&css_set_lock);
- for (i = 0; i < CSS_SET_TABLE_SIZE; i++) {
- struct css_set *cg;
- struct hlist_node *node, *tmp;
- struct hlist_head *bucket = &css_set_table[i], *new_bucket;
-
- hlist_for_each_entry_safe(cg, node, tmp, bucket, hlist) {
- /* skip entries that we already rehashed */
- if (cg->subsys[ss->subsys_id])
- continue;
- /* remove existing entry */
- hlist_del(&cg->hlist);
- /* set new value */
- cg->subsys[ss->subsys_id] = css;
- /* recompute hash and restore entry */
- new_bucket = css_set_hash(cg->subsys);
- hlist_add_head(&cg->hlist, new_bucket);
- }
+ hash_for_each_safe(css_set_table, i, node, tmp, cg, hlist) {
+ /* skip entries that we already rehashed */
+ if (cg->subsys[ss->subsys_id])
+ continue;
+ /* remove existing entry */
+ hash_del(&cg->hlist);
+ /* set new value */
+ cg->subsys[ss->subsys_id] = css;
+ /* recompute hash and restore entry */
+ key = css_set_hash(cg->subsys);
+ hash_add(css_set_table, node, key);
}
write_unlock(&css_set_lock);
@@ -4551,7 +4603,6 @@
void cgroup_unload_subsys(struct cgroup_subsys *ss)
{
struct cg_cgroup_link *link;
- struct hlist_head *hhead;
BUG_ON(ss->module == NULL);
@@ -4585,11 +4636,12 @@
write_lock(&css_set_lock);
list_for_each_entry(link, &dummytop->css_sets, cgrp_link_list) {
struct css_set *cg = link->cg;
+ unsigned long key;
- hlist_del(&cg->hlist);
+ hash_del(&cg->hlist);
cg->subsys[ss->subsys_id] = NULL;
- hhead = css_set_hash(cg->subsys);
- hlist_add_head(&cg->hlist, hhead);
+ key = css_set_hash(cg->subsys);
+ hash_add(css_set_table, &cg->hlist, key);
}
write_unlock(&css_set_lock);
@@ -4631,9 +4683,6 @@
list_add(&init_css_set_link.cg_link_list,
&init_css_set.cg_links);
- for (i = 0; i < CSS_SET_TABLE_SIZE; i++)
- INIT_HLIST_HEAD(&css_set_table[i]);
-
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
@@ -4667,7 +4716,7 @@
{
int err;
int i;
- struct hlist_head *hhead;
+ unsigned long key;
err = bdi_init(&cgroup_backing_dev_info);
if (err)
@@ -4686,8 +4735,8 @@
}
/* Add init_css_set to the hash table */
- hhead = css_set_hash(init_css_set.subsys);
- hlist_add_head(&init_css_set.hlist, hhead);
+ key = css_set_hash(init_css_set.subsys);
+ hash_add(css_set_table, &init_css_set.hlist, key);
BUG_ON(!init_root_id(&rootnode));
cgroup_kobj = kobject_create_and_add("cgroup", fs_kobj);
@@ -4982,8 +5031,7 @@
}
task_unlock(tsk);
- if (cg)
- put_css_set_taskexit(cg);
+ put_css_set_taskexit(cg);
}
/**
diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c
index e0e07fd..65349f0 100644
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -1,29 +1,41 @@
+/*
+ * Context tracking: Probe on high level context boundaries such as kernel
+ * and userspace. This includes syscalls and exceptions entry/exit.
+ *
+ * This is used by RCU to remove its dependency on the timer tick while a CPU
+ * runs in userspace.
+ *
+ * Started by Frederic Weisbecker:
+ *
+ * Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
+ *
+ * Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton,
+ * Steven Rostedt, Peter Zijlstra for suggestions and improvements.
+ *
+ */
+
#include <linux/context_tracking.h>
+#include <linux/kvm_host.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
-#include <linux/percpu.h>
#include <linux/hardirq.h>
+#include <linux/export.h>
-struct context_tracking {
- /*
- * When active is false, hooks are not set to
- * minimize overhead: TIF flags are cleared
- * and calls to user_enter/exit are ignored. This
- * may be further optimized using static keys.
- */
- bool active;
- enum {
- IN_KERNEL = 0,
- IN_USER,
- } state;
-};
-
-static DEFINE_PER_CPU(struct context_tracking, context_tracking) = {
+DEFINE_PER_CPU(struct context_tracking, context_tracking) = {
#ifdef CONFIG_CONTEXT_TRACKING_FORCE
.active = true,
#endif
};
+/**
+ * user_enter - Inform the context tracking that the CPU is going to
+ * enter userspace mode.
+ *
+ * This function must be called right before we switch from the kernel
+ * to userspace, when it's guaranteed the remaining kernel instructions
+ * to execute won't use any RCU read side critical section because this
+ * function sets RCU in extended quiescent state.
+ */
void user_enter(void)
{
unsigned long flags;
@@ -39,40 +51,90 @@
if (in_interrupt())
return;
+ /* Kernel threads aren't supposed to go to userspace */
WARN_ON_ONCE(!current->mm);
local_irq_save(flags);
if (__this_cpu_read(context_tracking.active) &&
__this_cpu_read(context_tracking.state) != IN_USER) {
- __this_cpu_write(context_tracking.state, IN_USER);
+ /*
+ * At this stage, only low level arch entry code remains and
+ * then we'll run in userspace. We can assume there won't be
+ * any RCU read-side critical section until the next call to
+ * user_exit() or rcu_irq_enter(). Let's remove RCU's dependency
+ * on the tick.
+ */
+ vtime_user_enter(current);
rcu_user_enter();
+ __this_cpu_write(context_tracking.state, IN_USER);
}
local_irq_restore(flags);
}
+
+/**
+ * user_exit - Inform the context tracking that the CPU is
+ * exiting userspace mode and entering the kernel.
+ *
+ * This function must be called after we entered the kernel from userspace
+ * before any use of RCU read side critical section. This potentially include
+ * any high level kernel code like syscalls, exceptions, signal handling, etc...
+ *
+ * This call supports re-entrancy. This way it can be called from any exception
+ * handler without needing to know if we came from userspace or not.
+ */
void user_exit(void)
{
unsigned long flags;
- /*
- * Some contexts may involve an exception occuring in an irq,
- * leading to that nesting:
- * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
- * This would mess up the dyntick_nesting count though. And rcu_irq_*()
- * helpers are enough to protect RCU uses inside the exception. So
- * just return immediately if we detect we are in an IRQ.
- */
if (in_interrupt())
return;
local_irq_save(flags);
if (__this_cpu_read(context_tracking.state) == IN_USER) {
- __this_cpu_write(context_tracking.state, IN_KERNEL);
+ /*
+ * We are going to run code that may use RCU. Inform
+ * RCU core about that (ie: we may need the tick again).
+ */
rcu_user_exit();
+ vtime_user_exit(current);
+ __this_cpu_write(context_tracking.state, IN_KERNEL);
}
local_irq_restore(flags);
}
+void guest_enter(void)
+{
+ if (vtime_accounting_enabled())
+ vtime_guest_enter(current);
+ else
+ __guest_enter();
+}
+EXPORT_SYMBOL_GPL(guest_enter);
+
+void guest_exit(void)
+{
+ if (vtime_accounting_enabled())
+ vtime_guest_exit(current);
+ else
+ __guest_exit();
+}
+EXPORT_SYMBOL_GPL(guest_exit);
+
+
+/**
+ * context_tracking_task_switch - context switch the syscall callbacks
+ * @prev: the task that is being switched out
+ * @next: the task that is being switched in
+ *
+ * The context tracking uses the syscall slow path to implement its user-kernel
+ * boundaries probes on syscalls. This way it doesn't impact the syscall fast
+ * path on CPUs that don't do context tracking.
+ *
+ * But we need to clear the flag on the previous task because it may later
+ * migrate to some CPU that doesn't do the context tracking. As such the TIF
+ * flag may not be desired there.
+ */
void context_tracking_task_switch(struct task_struct *prev,
struct task_struct *next)
{
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 3046a50..b5e4ab2 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -224,11 +224,13 @@
static inline void check_for_tasks(int cpu)
{
struct task_struct *p;
+ cputime_t utime, stime;
write_lock_irq(&tasklist_lock);
for_each_process(p) {
+ task_cputime(p, &utime, &stime);
if (task_cpu(p) == cpu && p->state == TASK_RUNNING &&
- (p->utime || p->stime))
+ (utime || stime))
printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d "
"(state = %ld, flags = %x)\n",
p->comm, task_pid_nr(p), cpu,
@@ -254,6 +256,8 @@
return err;
cpu_notify(CPU_DYING | param->mod, param->hcpu);
+ /* Park the stopper thread */
+ kthread_park(current);
return 0;
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 7bb63ee..4f9dfe4 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -61,14 +61,6 @@
#include <linux/cgroup.h>
/*
- * Workqueue for cpuset related tasks.
- *
- * Using kevent workqueue may cause deadlock when memory_migrate
- * is set. So we create a separate workqueue thread for cpuset.
- */
-static struct workqueue_struct *cpuset_wq;
-
-/*
* Tracks how many cpusets are currently defined in system.
* When there is only one cpuset (the root cpuset) we can
* short circuit some hooks.
@@ -95,18 +87,21 @@
cpumask_var_t cpus_allowed; /* CPUs allowed to tasks in cpuset */
nodemask_t mems_allowed; /* Memory Nodes allowed to tasks */
- struct cpuset *parent; /* my parent */
-
struct fmeter fmeter; /* memory_pressure filter */
+ /*
+ * Tasks are being attached to this cpuset. Used to prevent
+ * zeroing cpus/mems_allowed between ->can_attach() and ->attach().
+ */
+ int attach_in_progress;
+
/* partition number for rebuild_sched_domains() */
int pn;
/* for custom sched domain */
int relax_domain_level;
- /* used for walking a cpuset hierarchy */
- struct list_head stack_list;
+ struct work_struct hotplug_work;
};
/* Retrieve the cpuset for a cgroup */
@@ -123,6 +118,15 @@
struct cpuset, css);
}
+static inline struct cpuset *parent_cs(const struct cpuset *cs)
+{
+ struct cgroup *pcgrp = cs->css.cgroup->parent;
+
+ if (pcgrp)
+ return cgroup_cs(pcgrp);
+ return NULL;
+}
+
#ifdef CONFIG_NUMA
static inline bool task_has_mempolicy(struct task_struct *task)
{
@@ -138,6 +142,7 @@
/* bits in struct cpuset flags field */
typedef enum {
+ CS_ONLINE,
CS_CPU_EXCLUSIVE,
CS_MEM_EXCLUSIVE,
CS_MEM_HARDWALL,
@@ -147,13 +152,12 @@
CS_SPREAD_SLAB,
} cpuset_flagbits_t;
-/* the type of hotplug event */
-enum hotplug_event {
- CPUSET_CPU_OFFLINE,
- CPUSET_MEM_OFFLINE,
-};
-
/* convenient tests for these bits */
+static inline bool is_cpuset_online(const struct cpuset *cs)
+{
+ return test_bit(CS_ONLINE, &cs->flags);
+}
+
static inline int is_cpu_exclusive(const struct cpuset *cs)
{
return test_bit(CS_CPU_EXCLUSIVE, &cs->flags);
@@ -190,27 +194,52 @@
}
static struct cpuset top_cpuset = {
- .flags = ((1 << CS_CPU_EXCLUSIVE) | (1 << CS_MEM_EXCLUSIVE)),
+ .flags = ((1 << CS_ONLINE) | (1 << CS_CPU_EXCLUSIVE) |
+ (1 << CS_MEM_EXCLUSIVE)),
};
-/*
- * There are two global mutexes guarding cpuset structures. The first
- * is the main control groups cgroup_mutex, accessed via
- * cgroup_lock()/cgroup_unlock(). The second is the cpuset-specific
- * callback_mutex, below. They can nest. It is ok to first take
- * cgroup_mutex, then nest callback_mutex. We also require taking
- * task_lock() when dereferencing a task's cpuset pointer. See "The
- * task_lock() exception", at the end of this comment.
+/**
+ * cpuset_for_each_child - traverse online children of a cpuset
+ * @child_cs: loop cursor pointing to the current child
+ * @pos_cgrp: used for iteration
+ * @parent_cs: target cpuset to walk children of
*
- * A task must hold both mutexes to modify cpusets. If a task
- * holds cgroup_mutex, then it blocks others wanting that mutex,
- * ensuring that it is the only task able to also acquire callback_mutex
- * and be able to modify cpusets. It can perform various checks on
- * the cpuset structure first, knowing nothing will change. It can
- * also allocate memory while just holding cgroup_mutex. While it is
- * performing these checks, various callback routines can briefly
- * acquire callback_mutex to query cpusets. Once it is ready to make
- * the changes, it takes callback_mutex, blocking everyone else.
+ * Walk @child_cs through the online children of @parent_cs. Must be used
+ * with RCU read locked.
+ */
+#define cpuset_for_each_child(child_cs, pos_cgrp, parent_cs) \
+ cgroup_for_each_child((pos_cgrp), (parent_cs)->css.cgroup) \
+ if (is_cpuset_online(((child_cs) = cgroup_cs((pos_cgrp)))))
+
+/**
+ * cpuset_for_each_descendant_pre - pre-order walk of a cpuset's descendants
+ * @des_cs: loop cursor pointing to the current descendant
+ * @pos_cgrp: used for iteration
+ * @root_cs: target cpuset to walk ancestor of
+ *
+ * Walk @des_cs through the online descendants of @root_cs. Must be used
+ * with RCU read locked. The caller may modify @pos_cgrp by calling
+ * cgroup_rightmost_descendant() to skip subtree.
+ */
+#define cpuset_for_each_descendant_pre(des_cs, pos_cgrp, root_cs) \
+ cgroup_for_each_descendant_pre((pos_cgrp), (root_cs)->css.cgroup) \
+ if (is_cpuset_online(((des_cs) = cgroup_cs((pos_cgrp)))))
+
+/*
+ * There are two global mutexes guarding cpuset structures - cpuset_mutex
+ * and callback_mutex. The latter may nest inside the former. We also
+ * require taking task_lock() when dereferencing a task's cpuset pointer.
+ * See "The task_lock() exception", at the end of this comment.
+ *
+ * A task must hold both mutexes to modify cpusets. If a task holds
+ * cpuset_mutex, then it blocks others wanting that mutex, ensuring that it
+ * is the only task able to also acquire callback_mutex and be able to
+ * modify cpusets. It can perform various checks on the cpuset structure
+ * first, knowing nothing will change. It can also allocate memory while
+ * just holding cpuset_mutex. While it is performing these checks, various
+ * callback routines can briefly acquire callback_mutex to query cpusets.
+ * Once it is ready to make the changes, it takes callback_mutex, blocking
+ * everyone else.
*
* Calls to the kernel memory allocator can not be made while holding
* callback_mutex, as that would risk double tripping on callback_mutex
@@ -232,6 +261,7 @@
* guidelines for accessing subsystem state in kernel/cgroup.c
*/
+static DEFINE_MUTEX(cpuset_mutex);
static DEFINE_MUTEX(callback_mutex);
/*
@@ -246,6 +276,17 @@
static DEFINE_SPINLOCK(cpuset_buffer_lock);
/*
+ * CPU / memory hotplug is handled asynchronously.
+ */
+static struct workqueue_struct *cpuset_propagate_hotplug_wq;
+
+static void cpuset_hotplug_workfn(struct work_struct *work);
+static void cpuset_propagate_hotplug_workfn(struct work_struct *work);
+static void schedule_cpuset_propagate_hotplug(struct cpuset *cs);
+
+static DECLARE_WORK(cpuset_hotplug_work, cpuset_hotplug_workfn);
+
+/*
* This is ugly, but preserves the userspace API for existing cpuset
* users. If someone tries to mount the "cpuset" filesystem, we
* silently switch it to mount "cgroup" instead
@@ -289,7 +330,7 @@
struct cpumask *pmask)
{
while (cs && !cpumask_intersects(cs->cpus_allowed, cpu_online_mask))
- cs = cs->parent;
+ cs = parent_cs(cs);
if (cs)
cpumask_and(pmask, cs->cpus_allowed, cpu_online_mask);
else
@@ -314,7 +355,7 @@
{
while (cs && !nodes_intersects(cs->mems_allowed,
node_states[N_MEMORY]))
- cs = cs->parent;
+ cs = parent_cs(cs);
if (cs)
nodes_and(*pmask, cs->mems_allowed,
node_states[N_MEMORY]);
@@ -326,7 +367,7 @@
/*
* update task's spread flag if cpuset's page/slab spread flag is set
*
- * Called with callback_mutex/cgroup_mutex held
+ * Called with callback_mutex/cpuset_mutex held
*/
static void cpuset_update_task_spread_flag(struct cpuset *cs,
struct task_struct *tsk)
@@ -346,7 +387,7 @@
*
* One cpuset is a subset of another if all its allowed CPUs and
* Memory Nodes are a subset of the other, and its exclusive flags
- * are only set if the other's are set. Call holding cgroup_mutex.
+ * are only set if the other's are set. Call holding cpuset_mutex.
*/
static int is_cpuset_subset(const struct cpuset *p, const struct cpuset *q)
@@ -395,7 +436,7 @@
* If we replaced the flag and mask values of the current cpuset
* (cur) with those values in the trial cpuset (trial), would
* our various subset and exclusive rules still be valid? Presumes
- * cgroup_mutex held.
+ * cpuset_mutex held.
*
* 'cur' is the address of an actual, in-use cpuset. Operations
* such as list traversal that depend on the actual address of the
@@ -412,48 +453,58 @@
{
struct cgroup *cont;
struct cpuset *c, *par;
+ int ret;
+
+ rcu_read_lock();
/* Each of our child cpusets must be a subset of us */
- list_for_each_entry(cont, &cur->css.cgroup->children, sibling) {
- if (!is_cpuset_subset(cgroup_cs(cont), trial))
- return -EBUSY;
- }
+ ret = -EBUSY;
+ cpuset_for_each_child(c, cont, cur)
+ if (!is_cpuset_subset(c, trial))
+ goto out;
/* Remaining checks don't apply to root cpuset */
+ ret = 0;
if (cur == &top_cpuset)
- return 0;
+ goto out;
- par = cur->parent;
+ par = parent_cs(cur);
/* We must be a subset of our parent cpuset */
+ ret = -EACCES;
if (!is_cpuset_subset(trial, par))
- return -EACCES;
+ goto out;
/*
* If either I or some sibling (!= me) is exclusive, we can't
* overlap
*/
- list_for_each_entry(cont, &par->css.cgroup->children, sibling) {
- c = cgroup_cs(cont);
+ ret = -EINVAL;
+ cpuset_for_each_child(c, cont, par) {
if ((is_cpu_exclusive(trial) || is_cpu_exclusive(c)) &&
c != cur &&
cpumask_intersects(trial->cpus_allowed, c->cpus_allowed))
- return -EINVAL;
+ goto out;
if ((is_mem_exclusive(trial) || is_mem_exclusive(c)) &&
c != cur &&
nodes_intersects(trial->mems_allowed, c->mems_allowed))
- return -EINVAL;
+ goto out;
}
- /* Cpusets with tasks can't have empty cpus_allowed or mems_allowed */
- if (cgroup_task_count(cur->css.cgroup)) {
- if (cpumask_empty(trial->cpus_allowed) ||
- nodes_empty(trial->mems_allowed)) {
- return -ENOSPC;
- }
- }
+ /*
+ * Cpusets with tasks - existing or newly being attached - can't
+ * have empty cpus_allowed or mems_allowed.
+ */
+ ret = -ENOSPC;
+ if ((cgroup_task_count(cur->css.cgroup) || cur->attach_in_progress) &&
+ (cpumask_empty(trial->cpus_allowed) ||
+ nodes_empty(trial->mems_allowed)))
+ goto out;
- return 0;
+ ret = 0;
+out:
+ rcu_read_unlock();
+ return ret;
}
#ifdef CONFIG_SMP
@@ -474,31 +525,24 @@
return;
}
-static void
-update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+static void update_domain_attr_tree(struct sched_domain_attr *dattr,
+ struct cpuset *root_cs)
{
- LIST_HEAD(q);
+ struct cpuset *cp;
+ struct cgroup *pos_cgrp;
- list_add(&c->stack_list, &q);
- while (!list_empty(&q)) {
- struct cpuset *cp;
- struct cgroup *cont;
- struct cpuset *child;
-
- cp = list_first_entry(&q, struct cpuset, stack_list);
- list_del(q.next);
-
- if (cpumask_empty(cp->cpus_allowed))
+ rcu_read_lock();
+ cpuset_for_each_descendant_pre(cp, pos_cgrp, root_cs) {
+ /* skip the whole subtree if @cp doesn't have any CPU */
+ if (cpumask_empty(cp->cpus_allowed)) {
+ pos_cgrp = cgroup_rightmost_descendant(pos_cgrp);
continue;
+ }
if (is_sched_load_balance(cp))
update_domain_attr(dattr, cp);
-
- list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
- child = cgroup_cs(cont);
- list_add_tail(&child->stack_list, &q);
- }
}
+ rcu_read_unlock();
}
/*
@@ -520,7 +564,7 @@
* domains when operating in the severe memory shortage situations
* that could cause allocation failures below.
*
- * Must be called with cgroup_lock held.
+ * Must be called with cpuset_mutex held.
*
* The three key local variables below are:
* q - a linked-list queue of cpuset pointers, used to implement a
@@ -558,7 +602,6 @@
static int generate_sched_domains(cpumask_var_t **domains,
struct sched_domain_attr **attributes)
{
- LIST_HEAD(q); /* queue of cpusets to be scanned */
struct cpuset *cp; /* scans q */
struct cpuset **csa; /* array of all cpuset ptrs */
int csn; /* how many cpuset ptrs in csa so far */
@@ -567,6 +610,7 @@
struct sched_domain_attr *dattr; /* attributes for custom domains */
int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] struct cpumask slot */
+ struct cgroup *pos_cgrp;
doms = NULL;
dattr = NULL;
@@ -594,33 +638,27 @@
goto done;
csn = 0;
- list_add(&top_cpuset.stack_list, &q);
- while (!list_empty(&q)) {
- struct cgroup *cont;
- struct cpuset *child; /* scans child cpusets of cp */
-
- cp = list_first_entry(&q, struct cpuset, stack_list);
- list_del(q.next);
-
- if (cpumask_empty(cp->cpus_allowed))
- continue;
-
+ rcu_read_lock();
+ cpuset_for_each_descendant_pre(cp, pos_cgrp, &top_cpuset) {
/*
- * All child cpusets contain a subset of the parent's cpus, so
- * just skip them, and then we call update_domain_attr_tree()
- * to calc relax_domain_level of the corresponding sched
- * domain.
+ * Continue traversing beyond @cp iff @cp has some CPUs and
+ * isn't load balancing. The former is obvious. The
+ * latter: All child cpusets contain a subset of the
+ * parent's cpus, so just skip them, and then we call
+ * update_domain_attr_tree() to calc relax_domain_level of
+ * the corresponding sched domain.
*/
- if (is_sched_load_balance(cp)) {
- csa[csn++] = cp;
+ if (!cpumask_empty(cp->cpus_allowed) &&
+ !is_sched_load_balance(cp))
continue;
- }
- list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
- child = cgroup_cs(cont);
- list_add_tail(&child->stack_list, &q);
- }
- }
+ if (is_sched_load_balance(cp))
+ csa[csn++] = cp;
+
+ /* skip @cp's subtree */
+ pos_cgrp = cgroup_rightmost_descendant(pos_cgrp);
+ }
+ rcu_read_unlock();
for (i = 0; i < csn; i++)
csa[i]->pn = i;
@@ -725,25 +763,25 @@
/*
* Rebuild scheduler domains.
*
- * Call with neither cgroup_mutex held nor within get_online_cpus().
- * Takes both cgroup_mutex and get_online_cpus().
+ * If the flag 'sched_load_balance' of any cpuset with non-empty
+ * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
+ * which has that flag enabled, or if any cpuset with a non-empty
+ * 'cpus' is removed, then call this routine to rebuild the
+ * scheduler's dynamic sched domains.
*
- * Cannot be directly called from cpuset code handling changes
- * to the cpuset pseudo-filesystem, because it cannot be called
- * from code that already holds cgroup_mutex.
+ * Call with cpuset_mutex held. Takes get_online_cpus().
*/
-static void do_rebuild_sched_domains(struct work_struct *unused)
+static void rebuild_sched_domains_locked(void)
{
struct sched_domain_attr *attr;
cpumask_var_t *doms;
int ndoms;
+ lockdep_assert_held(&cpuset_mutex);
get_online_cpus();
/* Generate domain masks and attrs */
- cgroup_lock();
ndoms = generate_sched_domains(&doms, &attr);
- cgroup_unlock();
/* Have scheduler rebuild the domains */
partition_sched_domains(ndoms, doms, attr);
@@ -751,7 +789,7 @@
put_online_cpus();
}
#else /* !CONFIG_SMP */
-static void do_rebuild_sched_domains(struct work_struct *unused)
+static void rebuild_sched_domains_locked(void)
{
}
@@ -763,44 +801,11 @@
}
#endif /* CONFIG_SMP */
-static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
-
-/*
- * Rebuild scheduler domains, asynchronously via workqueue.
- *
- * If the flag 'sched_load_balance' of any cpuset with non-empty
- * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
- * which has that flag enabled, or if any cpuset with a non-empty
- * 'cpus' is removed, then call this routine to rebuild the
- * scheduler's dynamic sched domains.
- *
- * The rebuild_sched_domains() and partition_sched_domains()
- * routines must nest cgroup_lock() inside get_online_cpus(),
- * but such cpuset changes as these must nest that locking the
- * other way, holding cgroup_lock() for much of the code.
- *
- * So in order to avoid an ABBA deadlock, the cpuset code handling
- * these user changes delegates the actual sched domain rebuilding
- * to a separate workqueue thread, which ends up processing the
- * above do_rebuild_sched_domains() function.
- */
-static void async_rebuild_sched_domains(void)
-{
- queue_work(cpuset_wq, &rebuild_sched_domains_work);
-}
-
-/*
- * Accomplishes the same scheduler domain rebuild as the above
- * async_rebuild_sched_domains(), however it directly calls the
- * rebuild routine synchronously rather than calling it via an
- * asynchronous work thread.
- *
- * This can only be called from code that is not holding
- * cgroup_mutex (not nested in a cgroup_lock() call.)
- */
void rebuild_sched_domains(void)
{
- do_rebuild_sched_domains(NULL);
+ mutex_lock(&cpuset_mutex);
+ rebuild_sched_domains_locked();
+ mutex_unlock(&cpuset_mutex);
}
/**
@@ -808,7 +813,7 @@
* @tsk: task to test
* @scan: struct cgroup_scanner contained in its struct cpuset_hotplug_scanner
*
- * Call with cgroup_mutex held. May take callback_mutex during call.
+ * Call with cpuset_mutex held. May take callback_mutex during call.
* Called for each task in a cgroup by cgroup_scan_tasks().
* Return nonzero if this tasks's cpus_allowed mask should be changed (in other
* words, if its mask is not equal to its cpuset's mask).
@@ -829,7 +834,7 @@
* cpus_allowed mask needs to be changed.
*
* We don't need to re-check for the cgroup/cpuset membership, since we're
- * holding cgroup_lock() at this point.
+ * holding cpuset_mutex at this point.
*/
static void cpuset_change_cpumask(struct task_struct *tsk,
struct cgroup_scanner *scan)
@@ -842,7 +847,7 @@
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
* @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
- * Called with cgroup_mutex held
+ * Called with cpuset_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
@@ -920,7 +925,7 @@
heap_free(&heap);
if (is_load_balanced)
- async_rebuild_sched_domains();
+ rebuild_sched_domains_locked();
return 0;
}
@@ -932,7 +937,7 @@
* Temporarilly set tasks mems_allowed to target nodes of migration,
* so that the migration code can allocate pages on these nodes.
*
- * Call holding cgroup_mutex, so current's cpuset won't change
+ * Call holding cpuset_mutex, so current's cpuset won't change
* during this call, as manage_mutex holds off any cpuset_attach()
* calls. Therefore we don't need to take task_lock around the
* call to guarantee_online_mems(), as we know no one is changing
@@ -1007,7 +1012,7 @@
/*
* Update task's mems_allowed and rebind its mempolicy and vmas' mempolicy
* of it to cpuset's new mems_allowed, and migrate pages to new nodes if
- * memory_migrate flag is set. Called with cgroup_mutex held.
+ * memory_migrate flag is set. Called with cpuset_mutex held.
*/
static void cpuset_change_nodemask(struct task_struct *p,
struct cgroup_scanner *scan)
@@ -1016,7 +1021,7 @@
struct cpuset *cs;
int migrate;
const nodemask_t *oldmem = scan->data;
- static nodemask_t newmems; /* protected by cgroup_mutex */
+ static nodemask_t newmems; /* protected by cpuset_mutex */
cs = cgroup_cs(scan->cg);
guarantee_online_mems(cs, &newmems);
@@ -1043,7 +1048,7 @@
* @oldmem: old mems_allowed of cpuset cs
* @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
- * Called with cgroup_mutex held
+ * Called with cpuset_mutex held
* No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
* if @heap != NULL.
*/
@@ -1065,7 +1070,7 @@
* take while holding tasklist_lock. Forks can happen - the
* mpol_dup() cpuset_being_rebound check will catch such forks,
* and rebind their vma mempolicies too. Because we still hold
- * the global cgroup_mutex, we know that no other rebind effort
+ * the global cpuset_mutex, we know that no other rebind effort
* will be contending for the global variable cpuset_being_rebound.
* It's ok if we rebind the same mm twice; mpol_rebind_mm()
* is idempotent. Also migrate pages in each mm to new nodes.
@@ -1084,7 +1089,7 @@
* mempolicies and if the cpuset is marked 'memory_migrate',
* migrate the tasks pages to the new memory.
*
- * Call with cgroup_mutex held. May take callback_mutex during call.
+ * Call with cpuset_mutex held. May take callback_mutex during call.
* Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
* lock each such tasks mm->mmap_sem, scan its vma's and rebind
* their mempolicies to the cpusets new mems_allowed.
@@ -1168,7 +1173,7 @@
cs->relax_domain_level = val;
if (!cpumask_empty(cs->cpus_allowed) &&
is_sched_load_balance(cs))
- async_rebuild_sched_domains();
+ rebuild_sched_domains_locked();
}
return 0;
@@ -1182,7 +1187,7 @@
* Called by cgroup_scan_tasks() for each task in a cgroup.
*
* We don't need to re-check for the cgroup/cpuset membership, since we're
- * holding cgroup_lock() at this point.
+ * holding cpuset_mutex at this point.
*/
static void cpuset_change_flag(struct task_struct *tsk,
struct cgroup_scanner *scan)
@@ -1195,7 +1200,7 @@
* @cs: the cpuset in which each task's spread flags needs to be changed
* @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
- * Called with cgroup_mutex held
+ * Called with cpuset_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
@@ -1220,7 +1225,7 @@
* cs: the cpuset to update
* turning_on: whether the flag is being set or cleared
*
- * Call with cgroup_mutex held.
+ * Call with cpuset_mutex held.
*/
static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
@@ -1260,7 +1265,7 @@
mutex_unlock(&callback_mutex);
if (!cpumask_empty(trialcs->cpus_allowed) && balance_flag_changed)
- async_rebuild_sched_domains();
+ rebuild_sched_domains_locked();
if (spread_flag_changed)
update_tasks_flags(cs, &heap);
@@ -1368,24 +1373,18 @@
return val;
}
-/*
- * Protected by cgroup_lock. The nodemasks must be stored globally because
- * dynamically allocating them is not allowed in can_attach, and they must
- * persist until attach.
- */
-static cpumask_var_t cpus_attach;
-static nodemask_t cpuset_attach_nodemask_from;
-static nodemask_t cpuset_attach_nodemask_to;
-
-/* Called by cgroups to determine if a cpuset is usable; cgroup_mutex held */
+/* Called by cgroups to determine if a cpuset is usable; cpuset_mutex held */
static int cpuset_can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
{
struct cpuset *cs = cgroup_cs(cgrp);
struct task_struct *task;
int ret;
+ mutex_lock(&cpuset_mutex);
+
+ ret = -ENOSPC;
if (cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed))
- return -ENOSPC;
+ goto out_unlock;
cgroup_taskset_for_each(task, cgrp, tset) {
/*
@@ -1397,12 +1396,54 @@
* set_cpus_allowed_ptr() on all attached tasks before
* cpus_allowed may be changed.
*/
+ ret = -EINVAL;
if (task->flags & PF_THREAD_BOUND)
- return -EINVAL;
- if ((ret = security_task_setscheduler(task)))
- return ret;
+ goto out_unlock;
+ ret = security_task_setscheduler(task);
+ if (ret)
+ goto out_unlock;
}
+ /*
+ * Mark attach is in progress. This makes validate_change() fail
+ * changes which zero cpus/mems_allowed.
+ */
+ cs->attach_in_progress++;
+ ret = 0;
+out_unlock:
+ mutex_unlock(&cpuset_mutex);
+ return ret;
+}
+
+static void cpuset_cancel_attach(struct cgroup *cgrp,
+ struct cgroup_taskset *tset)
+{
+ mutex_lock(&cpuset_mutex);
+ cgroup_cs(cgrp)->attach_in_progress--;
+ mutex_unlock(&cpuset_mutex);
+}
+
+/*
+ * Protected by cpuset_mutex. cpus_attach is used only by cpuset_attach()
+ * but we can't allocate it dynamically there. Define it global and
+ * allocate from cpuset_init().
+ */
+static cpumask_var_t cpus_attach;
+
+static void cpuset_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
+{
+ /* static bufs protected by cpuset_mutex */
+ static nodemask_t cpuset_attach_nodemask_from;
+ static nodemask_t cpuset_attach_nodemask_to;
+ struct mm_struct *mm;
+ struct task_struct *task;
+ struct task_struct *leader = cgroup_taskset_first(tset);
+ struct cgroup *oldcgrp = cgroup_taskset_cur_cgroup(tset);
+ struct cpuset *cs = cgroup_cs(cgrp);
+ struct cpuset *oldcs = cgroup_cs(oldcgrp);
+
+ mutex_lock(&cpuset_mutex);
+
/* prepare for attach */
if (cs == &top_cpuset)
cpumask_copy(cpus_attach, cpu_possible_mask);
@@ -1411,18 +1452,6 @@
guarantee_online_mems(cs, &cpuset_attach_nodemask_to);
- return 0;
-}
-
-static void cpuset_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
-{
- struct mm_struct *mm;
- struct task_struct *task;
- struct task_struct *leader = cgroup_taskset_first(tset);
- struct cgroup *oldcgrp = cgroup_taskset_cur_cgroup(tset);
- struct cpuset *cs = cgroup_cs(cgrp);
- struct cpuset *oldcs = cgroup_cs(oldcgrp);
-
cgroup_taskset_for_each(task, cgrp, tset) {
/*
* can_attach beforehand should guarantee that this doesn't
@@ -1448,6 +1477,18 @@
&cpuset_attach_nodemask_to);
mmput(mm);
}
+
+ cs->attach_in_progress--;
+
+ /*
+ * We may have raced with CPU/memory hotunplug. Trigger hotplug
+ * propagation if @cs doesn't have any CPU or memory. It will move
+ * the newly added tasks to the nearest parent which can execute.
+ */
+ if (cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed))
+ schedule_cpuset_propagate_hotplug(cs);
+
+ mutex_unlock(&cpuset_mutex);
}
/* The various types of files and directories in a cpuset file system */
@@ -1469,12 +1510,13 @@
static int cpuset_write_u64(struct cgroup *cgrp, struct cftype *cft, u64 val)
{
- int retval = 0;
struct cpuset *cs = cgroup_cs(cgrp);
cpuset_filetype_t type = cft->private;
+ int retval = -ENODEV;
- if (!cgroup_lock_live_group(cgrp))
- return -ENODEV;
+ mutex_lock(&cpuset_mutex);
+ if (!is_cpuset_online(cs))
+ goto out_unlock;
switch (type) {
case FILE_CPU_EXCLUSIVE:
@@ -1508,18 +1550,20 @@
retval = -EINVAL;
break;
}
- cgroup_unlock();
+out_unlock:
+ mutex_unlock(&cpuset_mutex);
return retval;
}
static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
{
- int retval = 0;
struct cpuset *cs = cgroup_cs(cgrp);
cpuset_filetype_t type = cft->private;
+ int retval = -ENODEV;
- if (!cgroup_lock_live_group(cgrp))
- return -ENODEV;
+ mutex_lock(&cpuset_mutex);
+ if (!is_cpuset_online(cs))
+ goto out_unlock;
switch (type) {
case FILE_SCHED_RELAX_DOMAIN_LEVEL:
@@ -1529,7 +1573,8 @@
retval = -EINVAL;
break;
}
- cgroup_unlock();
+out_unlock:
+ mutex_unlock(&cpuset_mutex);
return retval;
}
@@ -1539,17 +1584,36 @@
static int cpuset_write_resmask(struct cgroup *cgrp, struct cftype *cft,
const char *buf)
{
- int retval = 0;
struct cpuset *cs = cgroup_cs(cgrp);
struct cpuset *trialcs;
+ int retval = -ENODEV;
- if (!cgroup_lock_live_group(cgrp))
- return -ENODEV;
+ /*
+ * CPU or memory hotunplug may leave @cs w/o any execution
+ * resources, in which case the hotplug code asynchronously updates
+ * configuration and transfers all tasks to the nearest ancestor
+ * which can execute.
+ *
+ * As writes to "cpus" or "mems" may restore @cs's execution
+ * resources, wait for the previously scheduled operations before
+ * proceeding, so that we don't end up keep removing tasks added
+ * after execution capability is restored.
+ *
+ * Flushing cpuset_hotplug_work is enough to synchronize against
+ * hotplug hanlding; however, cpuset_attach() may schedule
+ * propagation work directly. Flush the workqueue too.
+ */
+ flush_work(&cpuset_hotplug_work);
+ flush_workqueue(cpuset_propagate_hotplug_wq);
+
+ mutex_lock(&cpuset_mutex);
+ if (!is_cpuset_online(cs))
+ goto out_unlock;
trialcs = alloc_trial_cpuset(cs);
if (!trialcs) {
retval = -ENOMEM;
- goto out;
+ goto out_unlock;
}
switch (cft->private) {
@@ -1565,8 +1629,8 @@
}
free_trial_cpuset(trialcs);
-out:
- cgroup_unlock();
+out_unlock:
+ mutex_unlock(&cpuset_mutex);
return retval;
}
@@ -1790,15 +1854,12 @@
static struct cgroup_subsys_state *cpuset_css_alloc(struct cgroup *cont)
{
- struct cgroup *parent_cg = cont->parent;
- struct cgroup *tmp_cg;
- struct cpuset *parent, *cs;
+ struct cpuset *cs;
- if (!parent_cg)
+ if (!cont->parent)
return &top_cpuset.css;
- parent = cgroup_cs(parent_cg);
- cs = kmalloc(sizeof(*cs), GFP_KERNEL);
+ cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
if (!alloc_cpumask_var(&cs->cpus_allowed, GFP_KERNEL)) {
@@ -1806,22 +1867,38 @@
return ERR_PTR(-ENOMEM);
}
- cs->flags = 0;
- if (is_spread_page(parent))
- set_bit(CS_SPREAD_PAGE, &cs->flags);
- if (is_spread_slab(parent))
- set_bit(CS_SPREAD_SLAB, &cs->flags);
set_bit(CS_SCHED_LOAD_BALANCE, &cs->flags);
cpumask_clear(cs->cpus_allowed);
nodes_clear(cs->mems_allowed);
fmeter_init(&cs->fmeter);
+ INIT_WORK(&cs->hotplug_work, cpuset_propagate_hotplug_workfn);
cs->relax_domain_level = -1;
- cs->parent = parent;
+ return &cs->css;
+}
+
+static int cpuset_css_online(struct cgroup *cgrp)
+{
+ struct cpuset *cs = cgroup_cs(cgrp);
+ struct cpuset *parent = parent_cs(cs);
+ struct cpuset *tmp_cs;
+ struct cgroup *pos_cg;
+
+ if (!parent)
+ return 0;
+
+ mutex_lock(&cpuset_mutex);
+
+ set_bit(CS_ONLINE, &cs->flags);
+ if (is_spread_page(parent))
+ set_bit(CS_SPREAD_PAGE, &cs->flags);
+ if (is_spread_slab(parent))
+ set_bit(CS_SPREAD_SLAB, &cs->flags);
+
number_of_cpusets++;
- if (!test_bit(CGRP_CPUSET_CLONE_CHILDREN, &cont->flags))
- goto skip_clone;
+ if (!test_bit(CGRP_CPUSET_CLONE_CHILDREN, &cgrp->flags))
+ goto out_unlock;
/*
* Clone @parent's configuration if CGRP_CPUSET_CLONE_CHILDREN is
@@ -1836,35 +1913,49 @@
* changed to grant parent->cpus_allowed-sibling_cpus_exclusive
* (and likewise for mems) to the new cgroup.
*/
- list_for_each_entry(tmp_cg, &parent_cg->children, sibling) {
- struct cpuset *tmp_cs = cgroup_cs(tmp_cg);
-
- if (is_mem_exclusive(tmp_cs) || is_cpu_exclusive(tmp_cs))
- goto skip_clone;
+ rcu_read_lock();
+ cpuset_for_each_child(tmp_cs, pos_cg, parent) {
+ if (is_mem_exclusive(tmp_cs) || is_cpu_exclusive(tmp_cs)) {
+ rcu_read_unlock();
+ goto out_unlock;
+ }
}
+ rcu_read_unlock();
mutex_lock(&callback_mutex);
cs->mems_allowed = parent->mems_allowed;
cpumask_copy(cs->cpus_allowed, parent->cpus_allowed);
mutex_unlock(&callback_mutex);
-skip_clone:
- return &cs->css;
+out_unlock:
+ mutex_unlock(&cpuset_mutex);
+ return 0;
+}
+
+static void cpuset_css_offline(struct cgroup *cgrp)
+{
+ struct cpuset *cs = cgroup_cs(cgrp);
+
+ mutex_lock(&cpuset_mutex);
+
+ if (is_sched_load_balance(cs))
+ update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
+
+ number_of_cpusets--;
+ clear_bit(CS_ONLINE, &cs->flags);
+
+ mutex_unlock(&cpuset_mutex);
}
/*
* If the cpuset being removed has its flag 'sched_load_balance'
* enabled, then simulate turning sched_load_balance off, which
- * will call async_rebuild_sched_domains().
+ * will call rebuild_sched_domains_locked().
*/
static void cpuset_css_free(struct cgroup *cont)
{
struct cpuset *cs = cgroup_cs(cont);
- if (is_sched_load_balance(cs))
- update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
-
- number_of_cpusets--;
free_cpumask_var(cs->cpus_allowed);
kfree(cs);
}
@@ -1872,8 +1963,11 @@
struct cgroup_subsys cpuset_subsys = {
.name = "cpuset",
.css_alloc = cpuset_css_alloc,
+ .css_online = cpuset_css_online,
+ .css_offline = cpuset_css_offline,
.css_free = cpuset_css_free,
.can_attach = cpuset_can_attach,
+ .cancel_attach = cpuset_cancel_attach,
.attach = cpuset_attach,
.subsys_id = cpuset_subsys_id,
.base_cftypes = files,
@@ -1924,7 +2018,9 @@
{
struct cgroup *new_cgroup = scan->data;
+ cgroup_lock();
cgroup_attach_task(new_cgroup, tsk);
+ cgroup_unlock();
}
/**
@@ -1932,7 +2028,7 @@
* @from: cpuset in which the tasks currently reside
* @to: cpuset to which the tasks will be moved
*
- * Called with cgroup_mutex held
+ * Called with cpuset_mutex held
* callback_mutex must not be held, as cpuset_attach() will take it.
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
@@ -1959,169 +2055,200 @@
* removing that CPU or node from all cpusets. If this removes the
* last CPU or node from a cpuset, then move the tasks in the empty
* cpuset to its next-highest non-empty parent.
- *
- * Called with cgroup_mutex held
- * callback_mutex must not be held, as cpuset_attach() will take it.
*/
static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
{
struct cpuset *parent;
/*
- * The cgroup's css_sets list is in use if there are tasks
- * in the cpuset; the list is empty if there are none;
- * the cs->css.refcnt seems always 0.
- */
- if (list_empty(&cs->css.cgroup->css_sets))
- return;
-
- /*
* Find its next-highest non-empty parent, (top cpuset
* has online cpus, so can't be empty).
*/
- parent = cs->parent;
+ parent = parent_cs(cs);
while (cpumask_empty(parent->cpus_allowed) ||
nodes_empty(parent->mems_allowed))
- parent = parent->parent;
+ parent = parent_cs(parent);
move_member_tasks_to_cpuset(cs, parent);
}
-/*
- * Helper function to traverse cpusets.
- * It can be used to walk the cpuset tree from top to bottom, completing
- * one layer before dropping down to the next (thus always processing a
- * node before any of its children).
+/**
+ * cpuset_propagate_hotplug_workfn - propagate CPU/memory hotplug to a cpuset
+ * @cs: cpuset in interest
+ *
+ * Compare @cs's cpu and mem masks against top_cpuset and if some have gone
+ * offline, update @cs accordingly. If @cs ends up with no CPU or memory,
+ * all its tasks are moved to the nearest ancestor with both resources.
*/
-static struct cpuset *cpuset_next(struct list_head *queue)
+static void cpuset_propagate_hotplug_workfn(struct work_struct *work)
{
- struct cpuset *cp;
- struct cpuset *child; /* scans child cpusets of cp */
- struct cgroup *cont;
+ static cpumask_t off_cpus;
+ static nodemask_t off_mems, tmp_mems;
+ struct cpuset *cs = container_of(work, struct cpuset, hotplug_work);
+ bool is_empty;
- if (list_empty(queue))
- return NULL;
+ mutex_lock(&cpuset_mutex);
- cp = list_first_entry(queue, struct cpuset, stack_list);
- list_del(queue->next);
- list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
- child = cgroup_cs(cont);
- list_add_tail(&child->stack_list, queue);
+ cpumask_andnot(&off_cpus, cs->cpus_allowed, top_cpuset.cpus_allowed);
+ nodes_andnot(off_mems, cs->mems_allowed, top_cpuset.mems_allowed);
+
+ /* remove offline cpus from @cs */
+ if (!cpumask_empty(&off_cpus)) {
+ mutex_lock(&callback_mutex);
+ cpumask_andnot(cs->cpus_allowed, cs->cpus_allowed, &off_cpus);
+ mutex_unlock(&callback_mutex);
+ update_tasks_cpumask(cs, NULL);
}
- return cp;
+ /* remove offline mems from @cs */
+ if (!nodes_empty(off_mems)) {
+ tmp_mems = cs->mems_allowed;
+ mutex_lock(&callback_mutex);
+ nodes_andnot(cs->mems_allowed, cs->mems_allowed, off_mems);
+ mutex_unlock(&callback_mutex);
+ update_tasks_nodemask(cs, &tmp_mems, NULL);
+ }
+
+ is_empty = cpumask_empty(cs->cpus_allowed) ||
+ nodes_empty(cs->mems_allowed);
+
+ mutex_unlock(&cpuset_mutex);
+
+ /*
+ * If @cs became empty, move tasks to the nearest ancestor with
+ * execution resources. This is full cgroup operation which will
+ * also call back into cpuset. Should be done outside any lock.
+ */
+ if (is_empty)
+ remove_tasks_in_empty_cpuset(cs);
+
+ /* the following may free @cs, should be the last operation */
+ css_put(&cs->css);
}
-
-/*
- * Walk the specified cpuset subtree upon a hotplug operation (CPU/Memory
- * online/offline) and update the cpusets accordingly.
- * For regular CPU/Mem hotplug, look for empty cpusets; the tasks of such
- * cpuset must be moved to a parent cpuset.
+/**
+ * schedule_cpuset_propagate_hotplug - schedule hotplug propagation to a cpuset
+ * @cs: cpuset of interest
*
- * Called with cgroup_mutex held. We take callback_mutex to modify
- * cpus_allowed and mems_allowed.
- *
- * This walk processes the tree from top to bottom, completing one layer
- * before dropping down to the next. It always processes a node before
- * any of its children.
- *
- * In the case of memory hot-unplug, it will remove nodes from N_MEMORY
- * if all present pages from a node are offlined.
+ * Schedule cpuset_propagate_hotplug_workfn() which will update CPU and
+ * memory masks according to top_cpuset.
*/
-static void
-scan_cpusets_upon_hotplug(struct cpuset *root, enum hotplug_event event)
+static void schedule_cpuset_propagate_hotplug(struct cpuset *cs)
{
- LIST_HEAD(queue);
- struct cpuset *cp; /* scans cpusets being updated */
- static nodemask_t oldmems; /* protected by cgroup_mutex */
+ /*
+ * Pin @cs. The refcnt will be released when the work item
+ * finishes executing.
+ */
+ if (!css_tryget(&cs->css))
+ return;
- list_add_tail((struct list_head *)&root->stack_list, &queue);
+ /*
+ * Queue @cs->hotplug_work. If already pending, lose the css ref.
+ * cpuset_propagate_hotplug_wq is ordered and propagation will
+ * happen in the order this function is called.
+ */
+ if (!queue_work(cpuset_propagate_hotplug_wq, &cs->hotplug_work))
+ css_put(&cs->css);
+}
- switch (event) {
- case CPUSET_CPU_OFFLINE:
- while ((cp = cpuset_next(&queue)) != NULL) {
+/**
+ * cpuset_hotplug_workfn - handle CPU/memory hotunplug for a cpuset
+ *
+ * This function is called after either CPU or memory configuration has
+ * changed and updates cpuset accordingly. The top_cpuset is always
+ * synchronized to cpu_active_mask and N_MEMORY, which is necessary in
+ * order to make cpusets transparent (of no affect) on systems that are
+ * actively using CPU hotplug but making no active use of cpusets.
+ *
+ * Non-root cpusets are only affected by offlining. If any CPUs or memory
+ * nodes have been taken down, cpuset_propagate_hotplug() is invoked on all
+ * descendants.
+ *
+ * Note that CPU offlining during suspend is ignored. We don't modify
+ * cpusets across suspend/resume cycles at all.
+ */
+static void cpuset_hotplug_workfn(struct work_struct *work)
+{
+ static cpumask_t new_cpus, tmp_cpus;
+ static nodemask_t new_mems, tmp_mems;
+ bool cpus_updated, mems_updated;
+ bool cpus_offlined, mems_offlined;
- /* Continue past cpusets with all cpus online */
- if (cpumask_subset(cp->cpus_allowed, cpu_active_mask))
- continue;
+ mutex_lock(&cpuset_mutex);
- /* Remove offline cpus from this cpuset. */
- mutex_lock(&callback_mutex);
- cpumask_and(cp->cpus_allowed, cp->cpus_allowed,
- cpu_active_mask);
- mutex_unlock(&callback_mutex);
+ /* fetch the available cpus/mems and find out which changed how */
+ cpumask_copy(&new_cpus, cpu_active_mask);
+ new_mems = node_states[N_MEMORY];
- /* Move tasks from the empty cpuset to a parent */
- if (cpumask_empty(cp->cpus_allowed))
- remove_tasks_in_empty_cpuset(cp);
- else
- update_tasks_cpumask(cp, NULL);
- }
- break;
+ cpus_updated = !cpumask_equal(top_cpuset.cpus_allowed, &new_cpus);
+ cpus_offlined = cpumask_andnot(&tmp_cpus, top_cpuset.cpus_allowed,
+ &new_cpus);
- case CPUSET_MEM_OFFLINE:
- while ((cp = cpuset_next(&queue)) != NULL) {
+ mems_updated = !nodes_equal(top_cpuset.mems_allowed, new_mems);
+ nodes_andnot(tmp_mems, top_cpuset.mems_allowed, new_mems);
+ mems_offlined = !nodes_empty(tmp_mems);
- /* Continue past cpusets with all mems online */
- if (nodes_subset(cp->mems_allowed,
- node_states[N_MEMORY]))
- continue;
+ /* synchronize cpus_allowed to cpu_active_mask */
+ if (cpus_updated) {
+ mutex_lock(&callback_mutex);
+ cpumask_copy(top_cpuset.cpus_allowed, &new_cpus);
+ mutex_unlock(&callback_mutex);
+ /* we don't mess with cpumasks of tasks in top_cpuset */
+ }
- oldmems = cp->mems_allowed;
+ /* synchronize mems_allowed to N_MEMORY */
+ if (mems_updated) {
+ tmp_mems = top_cpuset.mems_allowed;
+ mutex_lock(&callback_mutex);
+ top_cpuset.mems_allowed = new_mems;
+ mutex_unlock(&callback_mutex);
+ update_tasks_nodemask(&top_cpuset, &tmp_mems, NULL);
+ }
- /* Remove offline mems from this cpuset. */
- mutex_lock(&callback_mutex);
- nodes_and(cp->mems_allowed, cp->mems_allowed,
- node_states[N_MEMORY]);
- mutex_unlock(&callback_mutex);
+ /* if cpus or mems went down, we need to propagate to descendants */
+ if (cpus_offlined || mems_offlined) {
+ struct cpuset *cs;
+ struct cgroup *pos_cgrp;
- /* Move tasks from the empty cpuset to a parent */
- if (nodes_empty(cp->mems_allowed))
- remove_tasks_in_empty_cpuset(cp);
- else
- update_tasks_nodemask(cp, &oldmems, NULL);
- }
+ rcu_read_lock();
+ cpuset_for_each_descendant_pre(cs, pos_cgrp, &top_cpuset)
+ schedule_cpuset_propagate_hotplug(cs);
+ rcu_read_unlock();
+ }
+
+ mutex_unlock(&cpuset_mutex);
+
+ /* wait for propagations to finish */
+ flush_workqueue(cpuset_propagate_hotplug_wq);
+
+ /* rebuild sched domains if cpus_allowed has changed */
+ if (cpus_updated) {
+ struct sched_domain_attr *attr;
+ cpumask_var_t *doms;
+ int ndoms;
+
+ mutex_lock(&cpuset_mutex);
+ ndoms = generate_sched_domains(&doms, &attr);
+ mutex_unlock(&cpuset_mutex);
+
+ partition_sched_domains(ndoms, doms, attr);
}
}
-/*
- * The top_cpuset tracks what CPUs and Memory Nodes are online,
- * period. This is necessary in order to make cpusets transparent
- * (of no affect) on systems that are actively using CPU hotplug
- * but making no active use of cpusets.
- *
- * The only exception to this is suspend/resume, where we don't
- * modify cpusets at all.
- *
- * This routine ensures that top_cpuset.cpus_allowed tracks
- * cpu_active_mask on each CPU hotplug (cpuhp) event.
- *
- * Called within get_online_cpus(). Needs to call cgroup_lock()
- * before calling generate_sched_domains().
- *
- * @cpu_online: Indicates whether this is a CPU online event (true) or
- * a CPU offline event (false).
- */
void cpuset_update_active_cpus(bool cpu_online)
{
- struct sched_domain_attr *attr;
- cpumask_var_t *doms;
- int ndoms;
-
- cgroup_lock();
- mutex_lock(&callback_mutex);
- cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
- mutex_unlock(&callback_mutex);
-
- if (!cpu_online)
- scan_cpusets_upon_hotplug(&top_cpuset, CPUSET_CPU_OFFLINE);
-
- ndoms = generate_sched_domains(&doms, &attr);
- cgroup_unlock();
-
- /* Have scheduler rebuild the domains */
- partition_sched_domains(ndoms, doms, attr);
+ /*
+ * We're inside cpu hotplug critical region which usually nests
+ * inside cgroup synchronization. Bounce actual hotplug processing
+ * to a work item to avoid reverse locking order.
+ *
+ * We still need to do partition_sched_domains() synchronously;
+ * otherwise, the scheduler will get confused and put tasks to the
+ * dead CPU. Fall back to the default single domain.
+ * cpuset_hotplug_workfn() will rebuild it as necessary.
+ */
+ partition_sched_domains(1, NULL, NULL);
+ schedule_work(&cpuset_hotplug_work);
}
#ifdef CONFIG_MEMORY_HOTPLUG
@@ -2133,29 +2260,7 @@
static int cpuset_track_online_nodes(struct notifier_block *self,
unsigned long action, void *arg)
{
- static nodemask_t oldmems; /* protected by cgroup_mutex */
-
- cgroup_lock();
- switch (action) {
- case MEM_ONLINE:
- oldmems = top_cpuset.mems_allowed;
- mutex_lock(&callback_mutex);
- top_cpuset.mems_allowed = node_states[N_MEMORY];
- mutex_unlock(&callback_mutex);
- update_tasks_nodemask(&top_cpuset, &oldmems, NULL);
- break;
- case MEM_OFFLINE:
- /*
- * needn't update top_cpuset.mems_allowed explicitly because
- * scan_cpusets_upon_hotplug() will update it.
- */
- scan_cpusets_upon_hotplug(&top_cpuset, CPUSET_MEM_OFFLINE);
- break;
- default:
- break;
- }
- cgroup_unlock();
-
+ schedule_work(&cpuset_hotplug_work);
return NOTIFY_OK;
}
#endif
@@ -2173,8 +2278,9 @@
hotplug_memory_notifier(cpuset_track_online_nodes, 10);
- cpuset_wq = create_singlethread_workqueue("cpuset");
- BUG_ON(!cpuset_wq);
+ cpuset_propagate_hotplug_wq =
+ alloc_ordered_workqueue("cpuset_hotplug", 0);
+ BUG_ON(!cpuset_propagate_hotplug_wq);
}
/**
@@ -2273,8 +2379,8 @@
*/
static const struct cpuset *nearest_hardwall_ancestor(const struct cpuset *cs)
{
- while (!(is_mem_exclusive(cs) || is_mem_hardwall(cs)) && cs->parent)
- cs = cs->parent;
+ while (!(is_mem_exclusive(cs) || is_mem_hardwall(cs)) && parent_cs(cs))
+ cs = parent_cs(cs);
return cs;
}
@@ -2412,17 +2518,6 @@
}
/**
- * cpuset_unlock - release lock on cpuset changes
- *
- * Undo the lock taken in a previous cpuset_lock() call.
- */
-
-void cpuset_unlock(void)
-{
- mutex_unlock(&callback_mutex);
-}
-
-/**
* cpuset_mem_spread_node() - On which node to begin search for a file page
* cpuset_slab_spread_node() - On which node to begin search for a slab page
*
@@ -2511,8 +2606,16 @@
dentry = task_cs(tsk)->css.cgroup->dentry;
spin_lock(&cpuset_buffer_lock);
- snprintf(cpuset_name, CPUSET_NAME_LEN,
- dentry ? (const char *)dentry->d_name.name : "/");
+
+ if (!dentry) {
+ strcpy(cpuset_name, "/");
+ } else {
+ spin_lock(&dentry->d_lock);
+ strlcpy(cpuset_name, (const char *)dentry->d_name.name,
+ CPUSET_NAME_LEN);
+ spin_unlock(&dentry->d_lock);
+ }
+
nodelist_scnprintf(cpuset_nodelist, CPUSET_NODELIST_LEN,
tsk->mems_allowed);
printk(KERN_INFO "%s cpuset=%s mems_allowed=%s\n",
@@ -2560,7 +2663,7 @@
* - Used for /proc/<pid>/cpuset.
* - No need to task_lock(tsk) on this tsk->cpuset reference, as it
* doesn't really matter if tsk->cpuset changes after we read it,
- * and we take cgroup_mutex, keeping cpuset_attach() from changing it
+ * and we take cpuset_mutex, keeping cpuset_attach() from changing it
* anyway.
*/
static int proc_cpuset_show(struct seq_file *m, void *unused_v)
@@ -2582,16 +2685,15 @@
if (!tsk)
goto out_free;
- retval = -EINVAL;
- cgroup_lock();
+ rcu_read_lock();
css = task_subsys_state(tsk, cpuset_subsys_id);
retval = cgroup_path(css->cgroup, buf, PAGE_SIZE);
+ rcu_read_unlock();
if (retval < 0)
- goto out_unlock;
+ goto out_put_task;
seq_puts(m, buf);
seq_putc(m, '\n');
-out_unlock:
- cgroup_unlock();
+out_put_task:
put_task_struct(tsk);
out_free:
kfree(buf);
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 418b3f7..d473988 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -106,6 +106,7 @@
unsigned long long t2, t3;
unsigned long flags;
struct timespec ts;
+ cputime_t utime, stime, stimescaled, utimescaled;
/* Though tsk->delays accessed later, early exit avoids
* unnecessary returning of other data
@@ -114,12 +115,14 @@
goto done;
tmp = (s64)d->cpu_run_real_total;
- cputime_to_timespec(tsk->utime + tsk->stime, &ts);
+ task_cputime(tsk, &utime, &stime);
+ cputime_to_timespec(utime + stime, &ts);
tmp += timespec_to_ns(&ts);
d->cpu_run_real_total = (tmp < (s64)d->cpu_run_real_total) ? 0 : tmp;
tmp = (s64)d->cpu_scaled_run_real_total;
- cputime_to_timespec(tsk->utimescaled + tsk->stimescaled, &ts);
+ task_cputime_scaled(tsk, &utimescaled, &stimescaled);
+ cputime_to_timespec(utimescaled + stimescaled, &ts);
tmp += timespec_to_ns(&ts);
d->cpu_scaled_run_real_total =
(tmp < (s64)d->cpu_scaled_run_real_total) ? 0 : tmp;
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 7b6646a..5c75791 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6171,11 +6171,14 @@
if (task) {
event->attach_state = PERF_ATTACH_TASK;
+
+ if (attr->type == PERF_TYPE_TRACEPOINT)
+ event->hw.tp_target = task;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
/*
* hw_breakpoint is a bit difficult here..
*/
- if (attr->type == PERF_TYPE_BREAKPOINT)
+ else if (attr->type == PERF_TYPE_BREAKPOINT)
event->hw.bp_target = task;
#endif
}
diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index fe8a916..a64f8ae 100644
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -676,7 +676,7 @@
err_alloc:
for_each_possible_cpu(err_cpu) {
for (i = 0; i < TYPE_MAX; i++)
- kfree(per_cpu(nr_task_bp_pinned[i], cpu));
+ kfree(per_cpu(nr_task_bp_pinned[i], err_cpu));
if (err_cpu == cpu)
break;
}
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index dea7acf..a567c8c 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -27,6 +27,7 @@
#include <linux/pagemap.h> /* read_mapping_page */
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/export.h>
#include <linux/rmap.h> /* anon_vma_prepare */
#include <linux/mmu_notifier.h> /* set_pte_at_notify */
#include <linux/swap.h> /* try_to_free_swap */
@@ -41,58 +42,31 @@
#define MAX_UPROBE_XOL_SLOTS UINSNS_PER_PAGE
static struct rb_root uprobes_tree = RB_ROOT;
+/*
+ * allows us to skip the uprobe_mmap if there are no uprobe events active
+ * at this time. Probably a fine grained per inode count is better?
+ */
+#define no_uprobe_events() RB_EMPTY_ROOT(&uprobes_tree)
static DEFINE_SPINLOCK(uprobes_treelock); /* serialize rbtree access */
#define UPROBES_HASH_SZ 13
-
-/*
- * We need separate register/unregister and mmap/munmap lock hashes because
- * of mmap_sem nesting.
- *
- * uprobe_register() needs to install probes on (potentially) all processes
- * and thus needs to acquire multiple mmap_sems (consequtively, not
- * concurrently), whereas uprobe_mmap() is called while holding mmap_sem
- * for the particular process doing the mmap.
- *
- * uprobe_register()->register_for_each_vma() needs to drop/acquire mmap_sem
- * because of lock order against i_mmap_mutex. This means there's a hole in
- * the register vma iteration where a mmap() can happen.
- *
- * Thus uprobe_register() can race with uprobe_mmap() and we can try and
- * install a probe where one is already installed.
- */
-
-/* serialize (un)register */
-static struct mutex uprobes_mutex[UPROBES_HASH_SZ];
-
-#define uprobes_hash(v) (&uprobes_mutex[((unsigned long)(v)) % UPROBES_HASH_SZ])
-
/* serialize uprobe->pending_list */
static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ];
#define uprobes_mmap_hash(v) (&uprobes_mmap_mutex[((unsigned long)(v)) % UPROBES_HASH_SZ])
static struct percpu_rw_semaphore dup_mmap_sem;
-/*
- * uprobe_events allows us to skip the uprobe_mmap if there are no uprobe
- * events active at this time. Probably a fine grained per inode count is
- * better?
- */
-static atomic_t uprobe_events = ATOMIC_INIT(0);
-
/* Have a copy of original instruction */
#define UPROBE_COPY_INSN 0
-/* Dont run handlers when first register/ last unregister in progress*/
-#define UPROBE_RUN_HANDLER 1
/* Can skip singlestep */
-#define UPROBE_SKIP_SSTEP 2
+#define UPROBE_SKIP_SSTEP 1
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
atomic_t ref;
+ struct rw_semaphore register_rwsem;
struct rw_semaphore consumer_rwsem;
- struct mutex copy_mutex; /* TODO: kill me and UPROBE_COPY_INSN */
struct list_head pending_list;
struct uprobe_consumer *consumers;
struct inode *inode; /* Also hold a ref to inode */
@@ -430,9 +404,6 @@
u = __insert_uprobe(uprobe);
spin_unlock(&uprobes_treelock);
- /* For now assume that the instruction need not be single-stepped */
- __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
-
return u;
}
@@ -452,8 +423,10 @@
uprobe->inode = igrab(inode);
uprobe->offset = offset;
+ init_rwsem(&uprobe->register_rwsem);
init_rwsem(&uprobe->consumer_rwsem);
- mutex_init(&uprobe->copy_mutex);
+ /* For now assume that the instruction need not be single-stepped */
+ __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
@@ -463,38 +436,17 @@
kfree(uprobe);
uprobe = cur_uprobe;
iput(inode);
- } else {
- atomic_inc(&uprobe_events);
}
return uprobe;
}
-static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
-{
- struct uprobe_consumer *uc;
-
- if (!test_bit(UPROBE_RUN_HANDLER, &uprobe->flags))
- return;
-
- down_read(&uprobe->consumer_rwsem);
- for (uc = uprobe->consumers; uc; uc = uc->next) {
- if (!uc->filter || uc->filter(uc, current))
- uc->handler(uc, regs);
- }
- up_read(&uprobe->consumer_rwsem);
-}
-
-/* Returns the previous consumer */
-static struct uprobe_consumer *
-consumer_add(struct uprobe *uprobe, struct uprobe_consumer *uc)
+static void consumer_add(struct uprobe *uprobe, struct uprobe_consumer *uc)
{
down_write(&uprobe->consumer_rwsem);
uc->next = uprobe->consumers;
uprobe->consumers = uc;
up_write(&uprobe->consumer_rwsem);
-
- return uc->next;
}
/*
@@ -588,7 +540,8 @@
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
return ret;
- mutex_lock(&uprobe->copy_mutex);
+ /* TODO: move this into _register, until then we abuse this sem. */
+ down_write(&uprobe->consumer_rwsem);
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
goto out;
@@ -612,7 +565,30 @@
set_bit(UPROBE_COPY_INSN, &uprobe->flags);
out:
- mutex_unlock(&uprobe->copy_mutex);
+ up_write(&uprobe->consumer_rwsem);
+
+ return ret;
+}
+
+static inline bool consumer_filter(struct uprobe_consumer *uc,
+ enum uprobe_filter_ctx ctx, struct mm_struct *mm)
+{
+ return !uc->filter || uc->filter(uc, ctx, mm);
+}
+
+static bool filter_chain(struct uprobe *uprobe,
+ enum uprobe_filter_ctx ctx, struct mm_struct *mm)
+{
+ struct uprobe_consumer *uc;
+ bool ret = false;
+
+ down_read(&uprobe->consumer_rwsem);
+ for (uc = uprobe->consumers; uc; uc = uc->next) {
+ ret = consumer_filter(uc, ctx, mm);
+ if (ret)
+ break;
+ }
+ up_read(&uprobe->consumer_rwsem);
return ret;
}
@@ -624,16 +600,6 @@
bool first_uprobe;
int ret;
- /*
- * If probe is being deleted, unregister thread could be done with
- * the vma-rmap-walk through. Adding a probe now can be fatal since
- * nobody will be able to cleanup. Also we could be from fork or
- * mremap path, where the probe might have already been inserted.
- * Hence behave as if probe already existed.
- */
- if (!uprobe->consumers)
- return 0;
-
ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr);
if (ret)
return ret;
@@ -658,14 +624,14 @@
static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
- /* can happen if uprobe_register() fails */
- if (!test_bit(MMF_HAS_UPROBES, &mm->flags))
- return 0;
-
set_bit(MMF_RECALC_UPROBES, &mm->flags);
return set_orig_insn(&uprobe->arch, mm, vaddr);
}
+static inline bool uprobe_is_active(struct uprobe *uprobe)
+{
+ return !RB_EMPTY_NODE(&uprobe->rb_node);
+}
/*
* There could be threads that have already hit the breakpoint. They
* will recheck the current insn and restart if find_uprobe() fails.
@@ -673,12 +639,15 @@
*/
static void delete_uprobe(struct uprobe *uprobe)
{
+ if (WARN_ON(!uprobe_is_active(uprobe)))
+ return;
+
spin_lock(&uprobes_treelock);
rb_erase(&uprobe->rb_node, &uprobes_tree);
spin_unlock(&uprobes_treelock);
+ RB_CLEAR_NODE(&uprobe->rb_node); /* for uprobe_is_active() */
iput(uprobe->inode);
put_uprobe(uprobe);
- atomic_dec(&uprobe_events);
}
struct map_info {
@@ -764,8 +733,10 @@
return curr;
}
-static int register_for_each_vma(struct uprobe *uprobe, bool is_register)
+static int
+register_for_each_vma(struct uprobe *uprobe, struct uprobe_consumer *new)
{
+ bool is_register = !!new;
struct map_info *info;
int err = 0;
@@ -794,10 +765,16 @@
vaddr_to_offset(vma, info->vaddr) != uprobe->offset)
goto unlock;
- if (is_register)
- err = install_breakpoint(uprobe, mm, vma, info->vaddr);
- else
- err |= remove_breakpoint(uprobe, mm, info->vaddr);
+ if (is_register) {
+ /* consult only the "caller", new consumer. */
+ if (consumer_filter(new,
+ UPROBE_FILTER_REGISTER, mm))
+ err = install_breakpoint(uprobe, mm, vma, info->vaddr);
+ } else if (test_bit(MMF_HAS_UPROBES, &mm->flags)) {
+ if (!filter_chain(uprobe,
+ UPROBE_FILTER_UNREGISTER, mm))
+ err |= remove_breakpoint(uprobe, mm, info->vaddr);
+ }
unlock:
up_write(&mm->mmap_sem);
@@ -810,17 +787,23 @@
return err;
}
-static int __uprobe_register(struct uprobe *uprobe)
+static int __uprobe_register(struct uprobe *uprobe, struct uprobe_consumer *uc)
{
- return register_for_each_vma(uprobe, true);
+ consumer_add(uprobe, uc);
+ return register_for_each_vma(uprobe, uc);
}
-static void __uprobe_unregister(struct uprobe *uprobe)
+static void __uprobe_unregister(struct uprobe *uprobe, struct uprobe_consumer *uc)
{
- if (!register_for_each_vma(uprobe, false))
- delete_uprobe(uprobe);
+ int err;
+ if (!consumer_del(uprobe, uc)) /* WARN? */
+ return;
+
+ err = register_for_each_vma(uprobe, NULL);
/* TODO : cant unregister? schedule a worker thread */
+ if (!uprobe->consumers && !err)
+ delete_uprobe(uprobe);
}
/*
@@ -845,31 +828,59 @@
struct uprobe *uprobe;
int ret;
- if (!inode || !uc || uc->next)
- return -EINVAL;
-
+ /* Racy, just to catch the obvious mistakes */
if (offset > i_size_read(inode))
return -EINVAL;
- ret = 0;
- mutex_lock(uprobes_hash(inode));
+ retry:
uprobe = alloc_uprobe(inode, offset);
-
- if (!uprobe) {
- ret = -ENOMEM;
- } else if (!consumer_add(uprobe, uc)) {
- ret = __uprobe_register(uprobe);
- if (ret) {
- uprobe->consumers = NULL;
- __uprobe_unregister(uprobe);
- } else {
- set_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
- }
+ if (!uprobe)
+ return -ENOMEM;
+ /*
+ * We can race with uprobe_unregister()->delete_uprobe().
+ * Check uprobe_is_active() and retry if it is false.
+ */
+ down_write(&uprobe->register_rwsem);
+ ret = -EAGAIN;
+ if (likely(uprobe_is_active(uprobe))) {
+ ret = __uprobe_register(uprobe, uc);
+ if (ret)
+ __uprobe_unregister(uprobe, uc);
}
+ up_write(&uprobe->register_rwsem);
+ put_uprobe(uprobe);
- mutex_unlock(uprobes_hash(inode));
- if (uprobe)
- put_uprobe(uprobe);
+ if (unlikely(ret == -EAGAIN))
+ goto retry;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(uprobe_register);
+
+/*
+ * uprobe_apply - unregister a already registered probe.
+ * @inode: the file in which the probe has to be removed.
+ * @offset: offset from the start of the file.
+ * @uc: consumer which wants to add more or remove some breakpoints
+ * @add: add or remove the breakpoints
+ */
+int uprobe_apply(struct inode *inode, loff_t offset,
+ struct uprobe_consumer *uc, bool add)
+{
+ struct uprobe *uprobe;
+ struct uprobe_consumer *con;
+ int ret = -ENOENT;
+
+ uprobe = find_uprobe(inode, offset);
+ if (!uprobe)
+ return ret;
+
+ down_write(&uprobe->register_rwsem);
+ for (con = uprobe->consumers; con && con != uc ; con = con->next)
+ ;
+ if (con)
+ ret = register_for_each_vma(uprobe, add ? uc : NULL);
+ up_write(&uprobe->register_rwsem);
+ put_uprobe(uprobe);
return ret;
}
@@ -884,25 +895,42 @@
{
struct uprobe *uprobe;
- if (!inode || !uc)
- return;
-
uprobe = find_uprobe(inode, offset);
if (!uprobe)
return;
- mutex_lock(uprobes_hash(inode));
+ down_write(&uprobe->register_rwsem);
+ __uprobe_unregister(uprobe, uc);
+ up_write(&uprobe->register_rwsem);
+ put_uprobe(uprobe);
+}
+EXPORT_SYMBOL_GPL(uprobe_unregister);
- if (consumer_del(uprobe, uc)) {
- if (!uprobe->consumers) {
- __uprobe_unregister(uprobe);
- clear_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
- }
+static int unapply_uprobe(struct uprobe *uprobe, struct mm_struct *mm)
+{
+ struct vm_area_struct *vma;
+ int err = 0;
+
+ down_read(&mm->mmap_sem);
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ unsigned long vaddr;
+ loff_t offset;
+
+ if (!valid_vma(vma, false) ||
+ vma->vm_file->f_mapping->host != uprobe->inode)
+ continue;
+
+ offset = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
+ if (uprobe->offset < offset ||
+ uprobe->offset >= offset + vma->vm_end - vma->vm_start)
+ continue;
+
+ vaddr = offset_to_vaddr(vma, uprobe->offset);
+ err |= remove_breakpoint(uprobe, mm, vaddr);
}
+ up_read(&mm->mmap_sem);
- mutex_unlock(uprobes_hash(inode));
- if (uprobe)
- put_uprobe(uprobe);
+ return err;
}
static struct rb_node *
@@ -979,7 +1007,7 @@
struct uprobe *uprobe, *u;
struct inode *inode;
- if (!atomic_read(&uprobe_events) || !valid_vma(vma, true))
+ if (no_uprobe_events() || !valid_vma(vma, true))
return 0;
inode = vma->vm_file->f_mapping->host;
@@ -988,9 +1016,14 @@
mutex_lock(uprobes_mmap_hash(inode));
build_probe_list(inode, vma, vma->vm_start, vma->vm_end, &tmp_list);
-
+ /*
+ * We can race with uprobe_unregister(), this uprobe can be already
+ * removed. But in this case filter_chain() must return false, all
+ * consumers have gone away.
+ */
list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
- if (!fatal_signal_pending(current)) {
+ if (!fatal_signal_pending(current) &&
+ filter_chain(uprobe, UPROBE_FILTER_MMAP, vma->vm_mm)) {
unsigned long vaddr = offset_to_vaddr(vma, uprobe->offset);
install_breakpoint(uprobe, vma->vm_mm, vma, vaddr);
}
@@ -1025,7 +1058,7 @@
*/
void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
- if (!atomic_read(&uprobe_events) || !valid_vma(vma, false))
+ if (no_uprobe_events() || !valid_vma(vma, false))
return;
if (!atomic_read(&vma->vm_mm->mm_users)) /* called by mmput() ? */
@@ -1042,22 +1075,14 @@
/* Slot allocation for XOL */
static int xol_add_vma(struct xol_area *area)
{
- struct mm_struct *mm;
- int ret;
-
- area->page = alloc_page(GFP_HIGHUSER);
- if (!area->page)
- return -ENOMEM;
-
- ret = -EALREADY;
- mm = current->mm;
+ struct mm_struct *mm = current->mm;
+ int ret = -EALREADY;
down_write(&mm->mmap_sem);
if (mm->uprobes_state.xol_area)
goto fail;
ret = -ENOMEM;
-
/* Try to map as high as possible, this is only a hint. */
area->vaddr = get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE, PAGE_SIZE, 0, 0);
if (area->vaddr & ~PAGE_MASK) {
@@ -1073,54 +1098,53 @@
smp_wmb(); /* pairs with get_xol_area() */
mm->uprobes_state.xol_area = area;
ret = 0;
-
-fail:
+ fail:
up_write(&mm->mmap_sem);
- if (ret)
- __free_page(area->page);
return ret;
}
-static struct xol_area *get_xol_area(struct mm_struct *mm)
-{
- struct xol_area *area;
-
- area = mm->uprobes_state.xol_area;
- smp_read_barrier_depends(); /* pairs with wmb in xol_add_vma() */
-
- return area;
-}
-
/*
- * xol_alloc_area - Allocate process's xol_area.
- * This area will be used for storing instructions for execution out of
- * line.
+ * get_xol_area - Allocate process's xol_area if necessary.
+ * This area will be used for storing instructions for execution out of line.
*
* Returns the allocated area or NULL.
*/
-static struct xol_area *xol_alloc_area(void)
+static struct xol_area *get_xol_area(void)
{
+ struct mm_struct *mm = current->mm;
struct xol_area *area;
+ area = mm->uprobes_state.xol_area;
+ if (area)
+ goto ret;
+
area = kzalloc(sizeof(*area), GFP_KERNEL);
if (unlikely(!area))
- return NULL;
+ goto out;
area->bitmap = kzalloc(BITS_TO_LONGS(UINSNS_PER_PAGE) * sizeof(long), GFP_KERNEL);
-
if (!area->bitmap)
- goto fail;
+ goto free_area;
+
+ area->page = alloc_page(GFP_HIGHUSER);
+ if (!area->page)
+ goto free_bitmap;
init_waitqueue_head(&area->wq);
if (!xol_add_vma(area))
return area;
-fail:
+ __free_page(area->page);
+ free_bitmap:
kfree(area->bitmap);
+ free_area:
kfree(area);
-
- return get_xol_area(current->mm);
+ out:
+ area = mm->uprobes_state.xol_area;
+ ret:
+ smp_read_barrier_depends(); /* pairs with wmb in xol_add_vma() */
+ return area;
}
/*
@@ -1186,33 +1210,26 @@
}
/*
- * xol_get_insn_slot - If was not allocated a slot, then
- * allocate a slot.
+ * xol_get_insn_slot - allocate a slot for xol.
* Returns the allocated slot address or 0.
*/
-static unsigned long xol_get_insn_slot(struct uprobe *uprobe, unsigned long slot_addr)
+static unsigned long xol_get_insn_slot(struct uprobe *uprobe)
{
struct xol_area *area;
unsigned long offset;
+ unsigned long xol_vaddr;
void *vaddr;
- area = get_xol_area(current->mm);
- if (!area) {
- area = xol_alloc_area();
- if (!area)
- return 0;
- }
- current->utask->xol_vaddr = xol_take_insn_slot(area);
-
- /*
- * Initialize the slot if xol_vaddr points to valid
- * instruction slot.
- */
- if (unlikely(!current->utask->xol_vaddr))
+ area = get_xol_area();
+ if (!area)
return 0;
- current->utask->vaddr = slot_addr;
- offset = current->utask->xol_vaddr & ~PAGE_MASK;
+ xol_vaddr = xol_take_insn_slot(area);
+ if (unlikely(!xol_vaddr))
+ return 0;
+
+ /* Initialize the slot */
+ offset = xol_vaddr & ~PAGE_MASK;
vaddr = kmap_atomic(area->page);
memcpy(vaddr + offset, uprobe->arch.insn, MAX_UINSN_BYTES);
kunmap_atomic(vaddr);
@@ -1222,7 +1239,7 @@
*/
flush_dcache_page(area->page);
- return current->utask->xol_vaddr;
+ return xol_vaddr;
}
/*
@@ -1240,8 +1257,7 @@
return;
slot_addr = tsk->utask->xol_vaddr;
-
- if (unlikely(!slot_addr || IS_ERR_VALUE(slot_addr)))
+ if (unlikely(!slot_addr))
return;
area = tsk->mm->uprobes_state.xol_area;
@@ -1303,33 +1319,48 @@
}
/*
- * Allocate a uprobe_task object for the task.
- * Called when the thread hits a breakpoint for the first time.
+ * Allocate a uprobe_task object for the task if if necessary.
+ * Called when the thread hits a breakpoint.
*
* Returns:
* - pointer to new uprobe_task on success
* - NULL otherwise
*/
-static struct uprobe_task *add_utask(void)
+static struct uprobe_task *get_utask(void)
{
- struct uprobe_task *utask;
-
- utask = kzalloc(sizeof *utask, GFP_KERNEL);
- if (unlikely(!utask))
- return NULL;
-
- current->utask = utask;
- return utask;
+ if (!current->utask)
+ current->utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
+ return current->utask;
}
/* Prepare to single-step probed instruction out of line. */
static int
-pre_ssout(struct uprobe *uprobe, struct pt_regs *regs, unsigned long vaddr)
+pre_ssout(struct uprobe *uprobe, struct pt_regs *regs, unsigned long bp_vaddr)
{
- if (xol_get_insn_slot(uprobe, vaddr) && !arch_uprobe_pre_xol(&uprobe->arch, regs))
- return 0;
+ struct uprobe_task *utask;
+ unsigned long xol_vaddr;
+ int err;
- return -EFAULT;
+ utask = get_utask();
+ if (!utask)
+ return -ENOMEM;
+
+ xol_vaddr = xol_get_insn_slot(uprobe);
+ if (!xol_vaddr)
+ return -ENOMEM;
+
+ utask->xol_vaddr = xol_vaddr;
+ utask->vaddr = bp_vaddr;
+
+ err = arch_uprobe_pre_xol(&uprobe->arch, regs);
+ if (unlikely(err)) {
+ xol_free_insn_slot(current);
+ return err;
+ }
+
+ utask->active_uprobe = uprobe;
+ utask->state = UTASK_SSTEP;
+ return 0;
}
/*
@@ -1391,6 +1422,7 @@
* This is not strictly accurate, we can race with
* uprobe_unregister() and see the already removed
* uprobe if delete_uprobe() was not yet called.
+ * Or this uprobe can be filtered out.
*/
if (vma_has_uprobes(vma, vma->vm_start, vma->vm_end))
return;
@@ -1452,13 +1484,33 @@
return uprobe;
}
+static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
+{
+ struct uprobe_consumer *uc;
+ int remove = UPROBE_HANDLER_REMOVE;
+
+ down_read(&uprobe->register_rwsem);
+ for (uc = uprobe->consumers; uc; uc = uc->next) {
+ int rc = uc->handler(uc, regs);
+
+ WARN(rc & ~UPROBE_HANDLER_MASK,
+ "bad rc=0x%x from %pf()\n", rc, uc->handler);
+ remove &= rc;
+ }
+
+ if (remove && uprobe->consumers) {
+ WARN_ON(!uprobe_is_active(uprobe));
+ unapply_uprobe(uprobe, current->mm);
+ }
+ up_read(&uprobe->register_rwsem);
+}
+
/*
* Run handler and ask thread to singlestep.
* Ensure all non-fatal signals cannot interrupt thread while it singlesteps.
*/
static void handle_swbp(struct pt_regs *regs)
{
- struct uprobe_task *utask;
struct uprobe *uprobe;
unsigned long bp_vaddr;
int uninitialized_var(is_swbp);
@@ -1483,6 +1535,10 @@
}
return;
}
+
+ /* change it in advance for ->handler() and restart */
+ instruction_pointer_set(regs, bp_vaddr);
+
/*
* TODO: move copy_insn/etc into _register and remove this hack.
* After we hit the bp, _unregister + _register can install the
@@ -1490,32 +1546,16 @@
*/
smp_rmb(); /* pairs with wmb() in install_breakpoint() */
if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
- goto restart;
-
- utask = current->utask;
- if (!utask) {
- utask = add_utask();
- /* Cannot allocate; re-execute the instruction. */
- if (!utask)
- goto restart;
- }
+ goto out;
handler_chain(uprobe, regs);
if (can_skip_sstep(uprobe, regs))
goto out;
- if (!pre_ssout(uprobe, regs, bp_vaddr)) {
- utask->active_uprobe = uprobe;
- utask->state = UTASK_SSTEP;
+ if (!pre_ssout(uprobe, regs, bp_vaddr))
return;
- }
-restart:
- /*
- * cannot singlestep; cannot skip instruction;
- * re-execute the instruction.
- */
- instruction_pointer_set(regs, bp_vaddr);
+ /* can_skip_sstep() succeeded, or restart if can't singlestep */
out:
put_uprobe(uprobe);
}
@@ -1609,10 +1649,8 @@
{
int i;
- for (i = 0; i < UPROBES_HASH_SZ; i++) {
- mutex_init(&uprobes_mutex[i]);
+ for (i = 0; i < UPROBES_HASH_SZ; i++)
mutex_init(&uprobes_mmap_mutex[i]);
- }
if (percpu_init_rwsem(&dup_mmap_sem))
return -ENOMEM;
diff --git a/kernel/exit.c b/kernel/exit.c
index b4df219..7dd2040 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -85,6 +85,7 @@
bool group_dead = thread_group_leader(tsk);
struct sighand_struct *sighand;
struct tty_struct *uninitialized_var(tty);
+ cputime_t utime, stime;
sighand = rcu_dereference_check(tsk->sighand,
lockdep_tasklist_lock_is_held());
@@ -123,9 +124,10 @@
* We won't ever get here for the group leader, since it
* will have been the last reference on the signal_struct.
*/
- sig->utime += tsk->utime;
- sig->stime += tsk->stime;
- sig->gtime += tsk->gtime;
+ task_cputime(tsk, &utime, &stime);
+ sig->utime += utime;
+ sig->stime += stime;
+ sig->gtime += task_gtime(tsk);
sig->min_flt += tsk->min_flt;
sig->maj_flt += tsk->maj_flt;
sig->nvcsw += tsk->nvcsw;
@@ -1092,7 +1094,7 @@
sig = p->signal;
psig->cutime += tgutime + sig->cutime;
psig->cstime += tgstime + sig->cstime;
- psig->cgtime += p->gtime + sig->gtime + sig->cgtime;
+ psig->cgtime += task_gtime(p) + sig->gtime + sig->cgtime;
psig->cmin_flt +=
p->min_flt + sig->min_flt + sig->cmin_flt;
psig->cmaj_flt +=
diff --git a/kernel/fork.c b/kernel/fork.c
index c535f33..4133876 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1233,6 +1233,12 @@
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
p->prev_cputime.utime = p->prev_cputime.stime = 0;
#endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+ seqlock_init(&p->vtime_seqlock);
+ p->vtime_snap = 0;
+ p->vtime_snap_whence = VTIME_SLEEPING;
+#endif
+
#if defined(SPLIT_RSS_COUNTING)
memset(&p->rss_stat, 0, sizeof(p->rss_stat));
#endif
diff --git a/kernel/futex.c b/kernel/futex.c
index 19eb089..9618b6e 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -60,6 +60,7 @@
#include <linux/pid.h>
#include <linux/nsproxy.h>
#include <linux/ptrace.h>
+#include <linux/sched/rt.h>
#include <asm/futex.h>
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 6db7a5e..cc47812 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -44,6 +44,8 @@
#include <linux/err.h>
#include <linux/debugobjects.h>
#include <linux/sched.h>
+#include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
#include <linux/timer.h>
#include <asm/uaccess.h>
@@ -640,21 +642,9 @@
* and expiry check is done in the hrtimer_interrupt or in the softirq.
*/
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
- if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
- if (wakeup) {
- raw_spin_unlock(&base->cpu_base->lock);
- raise_softirq_irqoff(HRTIMER_SOFTIRQ);
- raw_spin_lock(&base->cpu_base->lock);
- } else
- __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
-
- return 1;
- }
-
- return 0;
+ return base->cpu_base->hres_active && hrtimer_reprogram(timer, base);
}
static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
@@ -735,8 +725,7 @@
static inline void
hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
return 0;
}
@@ -995,8 +984,21 @@
*
* XXX send_remote_softirq() ?
*/
- if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
- hrtimer_enqueue_reprogram(timer, new_base, wakeup);
+ if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
+ && hrtimer_enqueue_reprogram(timer, new_base)) {
+ if (wakeup) {
+ /*
+ * We need to drop cpu_base->lock to avoid a
+ * lock ordering issue vs. rq->lock.
+ */
+ raw_spin_unlock(&new_base->cpu_base->lock);
+ raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ local_irq_restore(flags);
+ return ret;
+ } else {
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ }
+ }
unlock_hrtimer_base(timer, &flags);
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 3aca9f2..cbd97ce 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -90,6 +90,29 @@
EXPORT_SYMBOL(irq_set_handler_data);
/**
+ * irq_set_msi_desc_off - set MSI descriptor data for an irq at offset
+ * @irq_base: Interrupt number base
+ * @irq_offset: Interrupt number offset
+ * @entry: Pointer to MSI descriptor data
+ *
+ * Set the MSI descriptor entry for an irq at offset
+ */
+int irq_set_msi_desc_off(unsigned int irq_base, unsigned int irq_offset,
+ struct msi_desc *entry)
+{
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq_base + irq_offset, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
+
+ if (!desc)
+ return -EINVAL;
+ desc->irq_data.msi_desc = entry;
+ if (entry && !irq_offset)
+ entry->irq = irq_base;
+ irq_put_desc_unlock(desc, flags);
+ return 0;
+}
+
+/**
* irq_set_msi_desc - set MSI descriptor data for an irq
* @irq: Interrupt number
* @entry: Pointer to MSI descriptor data
@@ -98,16 +121,7 @@
*/
int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
{
- unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
-
- if (!desc)
- return -EINVAL;
- desc->irq_data.msi_desc = entry;
- if (entry)
- entry->irq = irq;
- irq_put_desc_unlock(desc, flags);
- return 0;
+ return irq_set_msi_desc_off(irq, 0, entry);
}
/**
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index e49a288..fa17855 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/task_work.h>
#include "internals.h"
@@ -1524,6 +1525,7 @@
out:
irq_put_desc_unlock(desc, flags);
}
+EXPORT_SYMBOL_GPL(enable_percpu_irq);
void disable_percpu_irq(unsigned int irq)
{
@@ -1537,6 +1539,7 @@
irq_percpu_disable(desc, cpu);
irq_put_desc_unlock(desc, flags);
}
+EXPORT_SYMBOL_GPL(disable_percpu_irq);
/*
* Internal function to unregister a percpu irqaction.
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 611cd60..7b5f012 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -80,13 +80,11 @@
/*
* All handlers must agree on IRQF_SHARED, so we test just the
- * first. Check for action->next as well.
+ * first.
*/
action = desc->action;
if (!action || !(action->flags & IRQF_SHARED) ||
- (action->flags & __IRQF_TIMER) ||
- (action->handler(irq, action->dev_id) == IRQ_HANDLED) ||
- !action->next)
+ (action->flags & __IRQF_TIMER))
goto out;
/* Already running on another processor */
@@ -104,6 +102,7 @@
do {
if (handle_irq_event(desc) == IRQ_HANDLED)
ret = IRQ_HANDLED;
+ /* Make sure that there is still a valid action */
action = desc->action;
} while ((desc->istate & IRQS_PENDING) && action);
desc->istate &= ~IRQS_POLL_INPROGRESS;
diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index 1588e3b..55fcce6 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -12,37 +12,36 @@
#include <linux/percpu.h>
#include <linux/hardirq.h>
#include <linux/irqflags.h>
+#include <linux/sched.h>
+#include <linux/tick.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
#include <asm/processor.h>
-/*
- * An entry can be in one of four states:
- *
- * free NULL, 0 -> {claimed} : free to be used
- * claimed NULL, 3 -> {pending} : claimed to be enqueued
- * pending next, 3 -> {busy} : queued, pending callback
- * busy NULL, 2 -> {free, claimed} : callback in progress, can be claimed
- */
-
-#define IRQ_WORK_PENDING 1UL
-#define IRQ_WORK_BUSY 2UL
-#define IRQ_WORK_FLAGS 3UL
static DEFINE_PER_CPU(struct llist_head, irq_work_list);
+static DEFINE_PER_CPU(int, irq_work_raised);
/*
* Claim the entry so that no one else will poke at it.
*/
static bool irq_work_claim(struct irq_work *work)
{
- unsigned long flags, nflags;
+ unsigned long flags, oflags, nflags;
+ /*
+ * Start with our best wish as a premise but only trust any
+ * flag value after cmpxchg() result.
+ */
+ flags = work->flags & ~IRQ_WORK_PENDING;
for (;;) {
- flags = work->flags;
- if (flags & IRQ_WORK_PENDING)
- return false;
nflags = flags | IRQ_WORK_FLAGS;
- if (cmpxchg(&work->flags, flags, nflags) == flags)
+ oflags = cmpxchg(&work->flags, flags, nflags);
+ if (oflags == flags)
break;
+ if (oflags & IRQ_WORK_PENDING)
+ return false;
+ flags = oflags;
cpu_relax();
}
@@ -57,57 +56,69 @@
}
/*
- * Queue the entry and raise the IPI if needed.
- */
-static void __irq_work_queue(struct irq_work *work)
-{
- bool empty;
-
- preempt_disable();
-
- empty = llist_add(&work->llnode, &__get_cpu_var(irq_work_list));
- /* The list was empty, raise self-interrupt to start processing. */
- if (empty)
- arch_irq_work_raise();
-
- preempt_enable();
-}
-
-/*
- * Enqueue the irq_work @entry, returns true on success, failure when the
- * @entry was already enqueued by someone else.
+ * Enqueue the irq_work @entry unless it's already pending
+ * somewhere.
*
* Can be re-enqueued while the callback is still in progress.
*/
-bool irq_work_queue(struct irq_work *work)
+void irq_work_queue(struct irq_work *work)
{
- if (!irq_work_claim(work)) {
- /*
- * Already enqueued, can't do!
- */
- return false;
+ /* Only queue if not already pending */
+ if (!irq_work_claim(work))
+ return;
+
+ /* Queue the entry and raise the IPI if needed. */
+ preempt_disable();
+
+ llist_add(&work->llnode, &__get_cpu_var(irq_work_list));
+
+ /*
+ * If the work is not "lazy" or the tick is stopped, raise the irq
+ * work interrupt (if supported by the arch), otherwise, just wait
+ * for the next tick.
+ */
+ if (!(work->flags & IRQ_WORK_LAZY) || tick_nohz_tick_stopped()) {
+ if (!this_cpu_cmpxchg(irq_work_raised, 0, 1))
+ arch_irq_work_raise();
}
- __irq_work_queue(work);
- return true;
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(irq_work_queue);
-/*
- * Run the irq_work entries on this cpu. Requires to be ran from hardirq
- * context with local IRQs disabled.
- */
-void irq_work_run(void)
+bool irq_work_needs_cpu(void)
{
+ struct llist_head *this_list;
+
+ this_list = &__get_cpu_var(irq_work_list);
+ if (llist_empty(this_list))
+ return false;
+
+ /* All work should have been flushed before going offline */
+ WARN_ON_ONCE(cpu_is_offline(smp_processor_id()));
+
+ return true;
+}
+
+static void __irq_work_run(void)
+{
+ unsigned long flags;
struct irq_work *work;
struct llist_head *this_list;
struct llist_node *llnode;
+
+ /*
+ * Reset the "raised" state right before we check the list because
+ * an NMI may enqueue after we find the list empty from the runner.
+ */
+ __this_cpu_write(irq_work_raised, 0);
+ barrier();
+
this_list = &__get_cpu_var(irq_work_list);
if (llist_empty(this_list))
return;
- BUG_ON(!in_irq());
BUG_ON(!irqs_disabled());
llnode = llist_del_all(this_list);
@@ -119,16 +130,31 @@
/*
* Clear the PENDING bit, after this point the @work
* can be re-used.
+ * Make it immediately visible so that other CPUs trying
+ * to claim that work don't rely on us to handle their data
+ * while we are in the middle of the func.
*/
- work->flags = IRQ_WORK_BUSY;
+ flags = work->flags & ~IRQ_WORK_PENDING;
+ xchg(&work->flags, flags);
+
work->func(work);
/*
* Clear the BUSY bit and return to the free state if
* no-one else claimed it meanwhile.
*/
- (void)cmpxchg(&work->flags, IRQ_WORK_BUSY, 0);
+ (void)cmpxchg(&work->flags, flags, flags & ~IRQ_WORK_BUSY);
}
}
+
+/*
+ * Run the irq_work entries on this cpu. Requires to be ran from hardirq
+ * context with local IRQs disabled.
+ */
+void irq_work_run(void)
+{
+ BUG_ON(!in_irq());
+ __irq_work_run();
+}
EXPORT_SYMBOL_GPL(irq_work_run);
/*
@@ -143,3 +169,35 @@
cpu_relax();
}
EXPORT_SYMBOL_GPL(irq_work_sync);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int irq_work_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ long cpu = (long)hcpu;
+
+ switch (action) {
+ case CPU_DYING:
+ /* Called from stop_machine */
+ if (WARN_ON_ONCE(cpu != smp_processor_id()))
+ break;
+ __irq_work_run();
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpu_notify;
+
+static __init int irq_work_init_cpu_notifier(void)
+{
+ cpu_notify.notifier_call = irq_work_cpu_notify;
+ cpu_notify.priority = 0;
+ register_cpu_notifier(&cpu_notify);
+ return 0;
+}
+device_initcall(irq_work_init_cpu_notifier);
+
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 0023a87..56dd349 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -38,6 +38,7 @@
#include <linux/suspend.h>
#include <linux/rwsem.h>
#include <linux/ptrace.h>
+#include <linux/async.h>
#include <asm/uaccess.h>
#include <trace/events/module.h>
@@ -130,6 +131,14 @@
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
+ /*
+ * We don't allow synchronous module loading from async. Module
+ * init may invoke async_synchronize_full() which will end up
+ * waiting for this task which already is waiting for the module
+ * loading to complete, leading to a deadlock.
+ */
+ WARN_ON_ONCE(wait && current_is_async());
+
va_start(args, fmt);
ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
va_end(args);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 098f396..550294d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -471,7 +471,6 @@
static void kprobe_optimizer(struct work_struct *work);
static DECLARE_DELAYED_WORK(optimizing_work, kprobe_optimizer);
-static DECLARE_COMPLETION(optimizer_comp);
#define OPTIMIZE_DELAY 5
/*
@@ -552,8 +551,7 @@
/* Start optimizer after OPTIMIZE_DELAY passed */
static __kprobes void kick_kprobe_optimizer(void)
{
- if (!delayed_work_pending(&optimizing_work))
- schedule_delayed_work(&optimizing_work, OPTIMIZE_DELAY);
+ schedule_delayed_work(&optimizing_work, OPTIMIZE_DELAY);
}
/* Kprobe jump optimizer */
@@ -592,16 +590,25 @@
/* Step 5: Kick optimizer again if needed */
if (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list))
kick_kprobe_optimizer();
- else
- /* Wake up all waiters */
- complete_all(&optimizer_comp);
}
/* Wait for completing optimization and unoptimization */
static __kprobes void wait_for_kprobe_optimizer(void)
{
- if (delayed_work_pending(&optimizing_work))
- wait_for_completion(&optimizer_comp);
+ mutex_lock(&kprobe_mutex);
+
+ while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
+ mutex_unlock(&kprobe_mutex);
+
+ /* this will also make optimizing_work execute immmediately */
+ flush_delayed_work(&optimizing_work);
+ /* @optimizing_work might not have been queued yet, relax */
+ cpu_relax();
+
+ mutex_lock(&kprobe_mutex);
+ }
+
+ mutex_unlock(&kprobe_mutex);
}
/* Optimize kprobe if p is ready to be optimized */
@@ -919,7 +926,7 @@
}
#endif /* CONFIG_OPTPROBES */
-#ifdef KPROBES_CAN_USE_FTRACE
+#ifdef CONFIG_KPROBES_ON_FTRACE
static struct ftrace_ops kprobe_ftrace_ops __read_mostly = {
.func = kprobe_ftrace_handler,
.flags = FTRACE_OPS_FL_SAVE_REGS,
@@ -964,7 +971,7 @@
(unsigned long)p->addr, 1, 0);
WARN(ret < 0, "Failed to disarm kprobe-ftrace at %p (%d)\n", p->addr, ret);
}
-#else /* !KPROBES_CAN_USE_FTRACE */
+#else /* !CONFIG_KPROBES_ON_FTRACE */
#define prepare_kprobe(p) arch_prepare_kprobe(p)
#define arm_kprobe_ftrace(p) do {} while (0)
#define disarm_kprobe_ftrace(p) do {} while (0)
@@ -1414,12 +1421,12 @@
*/
ftrace_addr = ftrace_location((unsigned long)p->addr);
if (ftrace_addr) {
-#ifdef KPROBES_CAN_USE_FTRACE
+#ifdef CONFIG_KPROBES_ON_FTRACE
/* Given address is not on the instruction boundary */
if ((unsigned long)p->addr != ftrace_addr)
return -EILSEQ;
p->flags |= KPROBE_FLAG_FTRACE;
-#else /* !KPROBES_CAN_USE_FTRACE */
+#else /* !CONFIG_KPROBES_ON_FTRACE */
return -EINVAL;
#endif
}
diff --git a/kernel/mutex.c b/kernel/mutex.c
index a307cc9..52f2301 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -19,6 +19,7 @@
*/
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index a278cad..8fd709c 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -155,11 +155,19 @@
static inline cputime_t prof_ticks(struct task_struct *p)
{
- return p->utime + p->stime;
+ cputime_t utime, stime;
+
+ task_cputime(p, &utime, &stime);
+
+ return utime + stime;
}
static inline cputime_t virt_ticks(struct task_struct *p)
{
- return p->utime;
+ cputime_t utime;
+
+ task_cputime(p, &utime, NULL);
+
+ return utime;
}
static int
@@ -471,18 +479,23 @@
*/
void posix_cpu_timers_exit(struct task_struct *tsk)
{
+ cputime_t utime, stime;
+
add_device_randomness((const void*) &tsk->se.sum_exec_runtime,
sizeof(unsigned long long));
+ task_cputime(tsk, &utime, &stime);
cleanup_timers(tsk->cpu_timers,
- tsk->utime, tsk->stime, tsk->se.sum_exec_runtime);
+ utime, stime, tsk->se.sum_exec_runtime);
}
void posix_cpu_timers_exit_group(struct task_struct *tsk)
{
struct signal_struct *const sig = tsk->signal;
+ cputime_t utime, stime;
+ task_cputime(tsk, &utime, &stime);
cleanup_timers(tsk->signal->cpu_timers,
- tsk->utime + sig->utime, tsk->stime + sig->stime,
+ utime + sig->utime, stime + sig->stime,
tsk->se.sum_exec_runtime + sig->sum_sched_runtime);
}
@@ -1226,11 +1239,14 @@
static inline int fastpath_timer_check(struct task_struct *tsk)
{
struct signal_struct *sig;
+ cputime_t utime, stime;
+
+ task_cputime(tsk, &utime, &stime);
if (!task_cputime_zero(&tsk->cputime_expires)) {
struct task_cputime task_sample = {
- .utime = tsk->utime,
- .stime = tsk->stime,
+ .utime = utime,
+ .stime = stime,
.sum_exec_runtime = tsk->se.sum_exec_runtime
};
@@ -1401,8 +1417,10 @@
while (!signal_pending(current)) {
if (timer.it.cpu.expires.sched == 0) {
/*
- * Our timer fired and was reset.
+ * Our timer fired and was reset, below
+ * deletion can not fail.
*/
+ posix_cpu_timer_del(&timer);
spin_unlock_irq(&timer.it_lock);
return 0;
}
@@ -1420,9 +1438,26 @@
* We were interrupted by a signal.
*/
sample_to_timespec(which_clock, timer.it.cpu.expires, rqtp);
- posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ error = posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ if (!error) {
+ /*
+ * Timer is now unarmed, deletion can not fail.
+ */
+ posix_cpu_timer_del(&timer);
+ }
spin_unlock_irq(&timer.it_lock);
+ while (error == TIMER_RETRY) {
+ /*
+ * We need to handle case when timer was or is in the
+ * middle of firing. In other cases we already freed
+ * resources.
+ */
+ spin_lock_irq(&timer.it_lock);
+ error = posix_cpu_timer_del(&timer);
+ spin_unlock_irq(&timer.it_lock);
+ }
+
if ((it->it_value.tv_sec | it->it_value.tv_nsec) == 0) {
/*
* It actually did fire already.
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 69185ae..10349d5 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -997,7 +997,7 @@
err = kc->clock_adj(which_clock, &ktx);
- if (!err && copy_to_user(utx, &ktx, sizeof(ktx)))
+ if (err >= 0 && copy_to_user(utx, &ktx, sizeof(ktx)))
return -EFAULT;
return err;
diff --git a/kernel/power/autosleep.c b/kernel/power/autosleep.c
index ca304046..c6422ff 100644
--- a/kernel/power/autosleep.c
+++ b/kernel/power/autosleep.c
@@ -66,7 +66,7 @@
void queue_up_suspend_work(void)
{
- if (!work_pending(&suspend_work) && autosleep_state > PM_SUSPEND_ON)
+ if (autosleep_state > PM_SUSPEND_ON)
queue_work(autosleep_wq, &suspend_work);
}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 1c16f91..d77663b 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -313,7 +313,7 @@
static suspend_state_t decode_state(const char *buf, size_t n)
{
#ifdef CONFIG_SUSPEND
- suspend_state_t state = PM_SUSPEND_STANDBY;
+ suspend_state_t state = PM_SUSPEND_MIN;
const char * const *s;
#endif
char *p;
@@ -553,6 +553,30 @@
#endif /* CONFIG_PM_TRACE */
+#ifdef CONFIG_FREEZER
+static ssize_t pm_freeze_timeout_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", freeze_timeout_msecs);
+}
+
+static ssize_t pm_freeze_timeout_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+
+ freeze_timeout_msecs = val;
+ return n;
+}
+
+power_attr(pm_freeze_timeout);
+
+#endif /* CONFIG_FREEZER*/
+
static struct attribute * g[] = {
&state_attr.attr,
#ifdef CONFIG_PM_TRACE
@@ -576,6 +600,9 @@
&pm_print_times_attr.attr,
#endif
#endif
+#ifdef CONFIG_FREEZER
+ &pm_freeze_timeout_attr.attr,
+#endif
NULL,
};
diff --git a/kernel/power/process.c b/kernel/power/process.c
index d5a258b..98088e0 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -21,7 +21,7 @@
/*
* Timeout for stopping processes
*/
-#define TIMEOUT (20 * HZ)
+unsigned int __read_mostly freeze_timeout_msecs = 20 * MSEC_PER_SEC;
static int try_to_freeze_tasks(bool user_only)
{
@@ -36,7 +36,7 @@
do_gettimeofday(&start);
- end_time = jiffies + TIMEOUT;
+ end_time = jiffies + msecs_to_jiffies(freeze_timeout_msecs);
if (!user_only)
freeze_workqueues_begin();
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 9322ff7..587ddde 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -359,8 +359,7 @@
return;
}
- if (delayed_work_pending(&req->work))
- cancel_delayed_work_sync(&req->work);
+ cancel_delayed_work_sync(&req->work);
if (new_value != req->node.prio)
pm_qos_update_target(
@@ -386,8 +385,7 @@
"%s called for unknown object.", __func__))
return;
- if (delayed_work_pending(&req->work))
- cancel_delayed_work_sync(&req->work);
+ cancel_delayed_work_sync(&req->work);
if (new_value != req->node.prio)
pm_qos_update_target(
@@ -416,8 +414,7 @@
return;
}
- if (delayed_work_pending(&req->work))
- cancel_delayed_work_sync(&req->work);
+ cancel_delayed_work_sync(&req->work);
pm_qos_update_target(pm_qos_array[req->pm_qos_class]->constraints,
&req->node, PM_QOS_REMOVE_REQ,
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index c8b7446..d4feda0 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -30,12 +30,38 @@
#include "power.h"
const char *const pm_states[PM_SUSPEND_MAX] = {
+ [PM_SUSPEND_FREEZE] = "freeze",
[PM_SUSPEND_STANDBY] = "standby",
[PM_SUSPEND_MEM] = "mem",
};
static const struct platform_suspend_ops *suspend_ops;
+static bool need_suspend_ops(suspend_state_t state)
+{
+ return !!(state > PM_SUSPEND_FREEZE);
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(suspend_freeze_wait_head);
+static bool suspend_freeze_wake;
+
+static void freeze_begin(void)
+{
+ suspend_freeze_wake = false;
+}
+
+static void freeze_enter(void)
+{
+ wait_event(suspend_freeze_wait_head, suspend_freeze_wake);
+}
+
+void freeze_wake(void)
+{
+ suspend_freeze_wake = true;
+ wake_up(&suspend_freeze_wait_head);
+}
+EXPORT_SYMBOL_GPL(freeze_wake);
+
/**
* suspend_set_ops - Set the global suspend method table.
* @ops: Suspend operations to use.
@@ -50,8 +76,11 @@
bool valid_state(suspend_state_t state)
{
+ if (state == PM_SUSPEND_FREEZE)
+ return true;
/*
- * All states need lowlevel support and need to be valid to the lowlevel
+ * PM_SUSPEND_STANDBY and PM_SUSPEND_MEMORY states need lowlevel
+ * support and need to be valid to the lowlevel
* implementation, no valid callback implies that none are valid.
*/
return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
@@ -89,11 +118,11 @@
* hibernation). Run suspend notifiers, allocate the "suspend" console and
* freeze processes.
*/
-static int suspend_prepare(void)
+static int suspend_prepare(suspend_state_t state)
{
int error;
- if (!suspend_ops || !suspend_ops->enter)
+ if (need_suspend_ops(state) && (!suspend_ops || !suspend_ops->enter))
return -EPERM;
pm_prepare_console();
@@ -137,7 +166,7 @@
{
int error;
- if (suspend_ops->prepare) {
+ if (need_suspend_ops(state) && suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
goto Platform_finish;
@@ -149,12 +178,23 @@
goto Platform_finish;
}
- if (suspend_ops->prepare_late) {
+ if (need_suspend_ops(state) && suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Platform_wake;
}
+ /*
+ * PM_SUSPEND_FREEZE equals
+ * frozen processes + suspended devices + idle processors.
+ * Thus we should invoke freeze_enter() soon after
+ * all the devices are suspended.
+ */
+ if (state == PM_SUSPEND_FREEZE) {
+ freeze_enter();
+ goto Platform_wake;
+ }
+
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
@@ -182,13 +222,13 @@
enable_nonboot_cpus();
Platform_wake:
- if (suspend_ops->wake)
+ if (need_suspend_ops(state) && suspend_ops->wake)
suspend_ops->wake();
dpm_resume_start(PMSG_RESUME);
Platform_finish:
- if (suspend_ops->finish)
+ if (need_suspend_ops(state) && suspend_ops->finish)
suspend_ops->finish();
return error;
@@ -203,11 +243,11 @@
int error;
bool wakeup = false;
- if (!suspend_ops)
+ if (need_suspend_ops(state) && !suspend_ops)
return -ENOSYS;
trace_machine_suspend(state);
- if (suspend_ops->begin) {
+ if (need_suspend_ops(state) && suspend_ops->begin) {
error = suspend_ops->begin(state);
if (error)
goto Close;
@@ -226,7 +266,7 @@
do {
error = suspend_enter(state, &wakeup);
- } while (!error && !wakeup
+ } while (!error && !wakeup && need_suspend_ops(state)
&& suspend_ops->suspend_again && suspend_ops->suspend_again());
Resume_devices:
@@ -236,13 +276,13 @@
ftrace_start();
resume_console();
Close:
- if (suspend_ops->end)
+ if (need_suspend_ops(state) && suspend_ops->end)
suspend_ops->end();
trace_machine_suspend(PWR_EVENT_EXIT);
return error;
Recover_platform:
- if (suspend_ops->recover)
+ if (need_suspend_ops(state) && suspend_ops->recover)
suspend_ops->recover();
goto Resume_devices;
}
@@ -278,12 +318,15 @@
if (!mutex_trylock(&pm_mutex))
return -EBUSY;
+ if (state == PM_SUSPEND_FREEZE)
+ freeze_begin();
+
printk(KERN_INFO "PM: Syncing filesystems ... ");
sys_sync();
printk("done.\n");
pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
- error = suspend_prepare();
+ error = suspend_prepare(state);
if (error)
goto Unlock;
diff --git a/kernel/printk.c b/kernel/printk.c
index 267ce78..f24633a 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -42,6 +42,7 @@
#include <linux/notifier.h>
#include <linux/rculist.h>
#include <linux/poll.h>
+#include <linux/irq_work.h>
#include <asm/uaccess.h>
@@ -1959,30 +1960,32 @@
static DEFINE_PER_CPU(int, printk_pending);
static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
-void printk_tick(void)
+static void wake_up_klogd_work_func(struct irq_work *irq_work)
{
- if (__this_cpu_read(printk_pending)) {
- int pending = __this_cpu_xchg(printk_pending, 0);
- if (pending & PRINTK_PENDING_SCHED) {
- char *buf = __get_cpu_var(printk_sched_buf);
- printk(KERN_WARNING "[sched_delayed] %s", buf);
- }
- if (pending & PRINTK_PENDING_WAKEUP)
- wake_up_interruptible(&log_wait);
+ int pending = __this_cpu_xchg(printk_pending, 0);
+
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
}
+
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
}
-int printk_needs_cpu(int cpu)
-{
- if (cpu_is_offline(cpu))
- printk_tick();
- return __this_cpu_read(printk_pending);
-}
+static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
+ .func = wake_up_klogd_work_func,
+ .flags = IRQ_WORK_LAZY,
+};
void wake_up_klogd(void)
{
- if (waitqueue_active(&log_wait))
+ preempt_disable();
+ if (waitqueue_active(&log_wait)) {
this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ }
+ preempt_enable();
}
static void console_cont_flush(char *text, size_t size)
@@ -2462,6 +2465,7 @@
va_end(args);
__this_cpu_or(printk_pending, PRINTK_PENDING_SCHED);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
local_irq_restore(flags);
return r;
diff --git a/kernel/profile.c b/kernel/profile.c
index 1f39181..dc3384e 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -37,9 +37,6 @@
#define NR_PROFILE_HIT (PAGE_SIZE/sizeof(struct profile_hit))
#define NR_PROFILE_GRP (NR_PROFILE_HIT/PROFILE_GRPSZ)
-/* Oprofile timer tick hook */
-static int (*timer_hook)(struct pt_regs *) __read_mostly;
-
static atomic_t *prof_buffer;
static unsigned long prof_len, prof_shift;
@@ -208,25 +205,6 @@
}
EXPORT_SYMBOL_GPL(profile_event_unregister);
-int register_timer_hook(int (*hook)(struct pt_regs *))
-{
- if (timer_hook)
- return -EBUSY;
- timer_hook = hook;
- return 0;
-}
-EXPORT_SYMBOL_GPL(register_timer_hook);
-
-void unregister_timer_hook(int (*hook)(struct pt_regs *))
-{
- WARN_ON(hook != timer_hook);
- timer_hook = NULL;
- /* make sure all CPUs see the NULL hook */
- synchronize_sched(); /* Allow ongoing interrupts to complete. */
-}
-EXPORT_SYMBOL_GPL(unregister_timer_hook);
-
-
#ifdef CONFIG_SMP
/*
* Each cpu has a pair of open-addressed hashtables for pending
@@ -436,8 +414,6 @@
{
struct pt_regs *regs = get_irq_regs();
- if (type == CPU_PROFILING && timer_hook)
- timer_hook(regs);
if (!user_mode(regs) && prof_cpu_mask != NULL &&
cpumask_test_cpu(smp_processor_id(), prof_cpu_mask))
profile_hit(type, (void *)profile_pc(regs));
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 6cbeaae..acbd284 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -712,6 +712,12 @@
kiov->iov_len, kiov->iov_base);
}
+/*
+ * This is declared in linux/regset.h and defined in machine-dependent
+ * code. We put the export here, near the primary machine-neutral use,
+ * to ensure no machine forgets it.
+ */
+EXPORT_SYMBOL_GPL(task_user_regset_view);
#endif
int ptrace_request(struct task_struct *child, long request,
diff --git a/kernel/rcu.h b/kernel/rcu.h
index 20dfba5..7f8e759 100644
--- a/kernel/rcu.h
+++ b/kernel/rcu.h
@@ -111,4 +111,11 @@
extern int rcu_expedited;
+#ifdef CONFIG_RCU_STALL_COMMON
+
+extern int rcu_cpu_stall_suppress;
+int rcu_jiffies_till_stall_check(void);
+
+#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
+
#endif /* __LINUX_RCU_H */
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index a2cf761..48ab703 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -404,11 +404,65 @@
#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
-void do_trace_rcu_torture_read(char *rcutorturename, struct rcu_head *rhp)
+void do_trace_rcu_torture_read(char *rcutorturename, struct rcu_head *rhp,
+ unsigned long secs,
+ unsigned long c_old, unsigned long c)
{
- trace_rcu_torture_read(rcutorturename, rhp);
+ trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
}
EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
#else
-#define do_trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
+ do { } while (0)
#endif
+
+#ifdef CONFIG_RCU_STALL_COMMON
+
+#ifdef CONFIG_PROVE_RCU
+#define RCU_STALL_DELAY_DELTA (5 * HZ)
+#else
+#define RCU_STALL_DELAY_DELTA 0
+#endif
+
+int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
+int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
+
+module_param(rcu_cpu_stall_suppress, int, 0644);
+module_param(rcu_cpu_stall_timeout, int, 0644);
+
+int rcu_jiffies_till_stall_check(void)
+{
+ int till_stall_check = ACCESS_ONCE(rcu_cpu_stall_timeout);
+
+ /*
+ * Limit check must be consistent with the Kconfig limits
+ * for CONFIG_RCU_CPU_STALL_TIMEOUT.
+ */
+ if (till_stall_check < 3) {
+ ACCESS_ONCE(rcu_cpu_stall_timeout) = 3;
+ till_stall_check = 3;
+ } else if (till_stall_check > 300) {
+ ACCESS_ONCE(rcu_cpu_stall_timeout) = 300;
+ till_stall_check = 300;
+ }
+ return till_stall_check * HZ + RCU_STALL_DELAY_DELTA;
+}
+
+static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr)
+{
+ rcu_cpu_stall_suppress = 1;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block rcu_panic_block = {
+ .notifier_call = rcu_panic,
+};
+
+static int __init check_cpu_stall_init(void)
+{
+ atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block);
+ return 0;
+}
+early_initcall(check_cpu_stall_init);
+
+#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index e7dce58..a0714a5 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -51,10 +51,10 @@
void (*func)(struct rcu_head *rcu),
struct rcu_ctrlblk *rcp);
-#include "rcutiny_plugin.h"
-
static long long rcu_dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
+#include "rcutiny_plugin.h"
+
/* Common code for rcu_idle_enter() and rcu_irq_exit(), see kernel/rcutree.c. */
static void rcu_idle_enter_common(long long newval)
{
@@ -193,7 +193,7 @@
* interrupts don't count, we must be running at the first interrupt
* level.
*/
-int rcu_is_cpu_rrupt_from_idle(void)
+static int rcu_is_cpu_rrupt_from_idle(void)
{
return rcu_dynticks_nesting <= 1;
}
@@ -205,6 +205,7 @@
*/
static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
{
+ reset_cpu_stall_ticks(rcp);
if (rcp->rcucblist != NULL &&
rcp->donetail != rcp->curtail) {
rcp->donetail = rcp->curtail;
@@ -251,6 +252,7 @@
*/
void rcu_check_callbacks(int cpu, int user)
{
+ check_cpu_stalls();
if (user || rcu_is_cpu_rrupt_from_idle())
rcu_sched_qs(cpu);
else if (!in_softirq())
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index f85016a..8a23300 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -33,6 +33,9 @@
struct rcu_head **donetail; /* ->next pointer of last "done" CB. */
struct rcu_head **curtail; /* ->next pointer of last CB. */
RCU_TRACE(long qlen); /* Number of pending CBs. */
+ RCU_TRACE(unsigned long gp_start); /* Start time for stalls. */
+ RCU_TRACE(unsigned long ticks_this_gp); /* Statistic for stalls. */
+ RCU_TRACE(unsigned long jiffies_stall); /* Jiffies at next stall. */
RCU_TRACE(char *name); /* Name of RCU type. */
};
@@ -54,6 +57,51 @@
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+#ifdef CONFIG_RCU_TRACE
+
+static void check_cpu_stall(struct rcu_ctrlblk *rcp)
+{
+ unsigned long j;
+ unsigned long js;
+
+ if (rcu_cpu_stall_suppress)
+ return;
+ rcp->ticks_this_gp++;
+ j = jiffies;
+ js = rcp->jiffies_stall;
+ if (*rcp->curtail && ULONG_CMP_GE(j, js)) {
+ pr_err("INFO: %s stall on CPU (%lu ticks this GP) idle=%llx (t=%lu jiffies q=%ld)\n",
+ rcp->name, rcp->ticks_this_gp, rcu_dynticks_nesting,
+ jiffies - rcp->gp_start, rcp->qlen);
+ dump_stack();
+ }
+ if (*rcp->curtail && ULONG_CMP_GE(j, js))
+ rcp->jiffies_stall = jiffies +
+ 3 * rcu_jiffies_till_stall_check() + 3;
+ else if (ULONG_CMP_GE(j, js))
+ rcp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check();
+}
+
+static void check_cpu_stall_preempt(void);
+
+#endif /* #ifdef CONFIG_RCU_TRACE */
+
+static void reset_cpu_stall_ticks(struct rcu_ctrlblk *rcp)
+{
+#ifdef CONFIG_RCU_TRACE
+ rcp->ticks_this_gp = 0;
+ rcp->gp_start = jiffies;
+ rcp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check();
+#endif /* #ifdef CONFIG_RCU_TRACE */
+}
+
+static void check_cpu_stalls(void)
+{
+ RCU_TRACE(check_cpu_stall(&rcu_bh_ctrlblk));
+ RCU_TRACE(check_cpu_stall(&rcu_sched_ctrlblk));
+ RCU_TRACE(check_cpu_stall_preempt());
+}
+
#ifdef CONFIG_TINY_PREEMPT_RCU
#include <linux/delay.h>
@@ -448,6 +496,7 @@
/* Official start of GP. */
rcu_preempt_ctrlblk.gpnum++;
RCU_TRACE(rcu_preempt_ctrlblk.n_grace_periods++);
+ reset_cpu_stall_ticks(&rcu_preempt_ctrlblk.rcb);
/* Any blocked RCU readers block new GP. */
if (rcu_preempt_blocked_readers_any())
@@ -1054,4 +1103,11 @@
MODULE_DESCRIPTION("Read-Copy Update tracing for tiny implementation");
MODULE_LICENSE("GPL");
+static void check_cpu_stall_preempt(void)
+{
+#ifdef CONFIG_TINY_PREEMPT_RCU
+ check_cpu_stall(&rcu_preempt_ctrlblk.rcb);
+#endif /* #ifdef CONFIG_TINY_PREEMPT_RCU */
+}
+
#endif /* #ifdef CONFIG_RCU_TRACE */
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 31dea01..e1f3a8c 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -46,6 +46,7 @@
#include <linux/stat.h>
#include <linux/srcu.h>
#include <linux/slab.h>
+#include <linux/trace_clock.h>
#include <asm/byteorder.h>
MODULE_LICENSE("GPL");
@@ -207,6 +208,20 @@
#define rcu_can_boost() 0
#endif /* #else #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */
+#ifdef CONFIG_RCU_TRACE
+static u64 notrace rcu_trace_clock_local(void)
+{
+ u64 ts = trace_clock_local();
+ unsigned long __maybe_unused ts_rem = do_div(ts, NSEC_PER_USEC);
+ return ts;
+}
+#else /* #ifdef CONFIG_RCU_TRACE */
+static u64 notrace rcu_trace_clock_local(void)
+{
+ return 0ULL;
+}
+#endif /* #else #ifdef CONFIG_RCU_TRACE */
+
static unsigned long shutdown_time; /* jiffies to system shutdown. */
static unsigned long boost_starttime; /* jiffies of next boost test start. */
DEFINE_MUTEX(boost_mutex); /* protect setting boost_starttime */
@@ -845,7 +860,7 @@
/* Wait for the next test interval. */
oldstarttime = boost_starttime;
while (ULONG_CMP_LT(jiffies, oldstarttime)) {
- schedule_timeout_uninterruptible(1);
+ schedule_timeout_interruptible(oldstarttime - jiffies);
rcu_stutter_wait("rcu_torture_boost");
if (kthread_should_stop() ||
fullstop != FULLSTOP_DONTSTOP)
@@ -1028,7 +1043,6 @@
return;
if (atomic_xchg(&beenhere, 1) != 0)
return;
- do_trace_rcu_torture_read(cur_ops->name, (struct rcu_head *)~0UL);
ftrace_dump(DUMP_ALL);
}
@@ -1042,13 +1056,16 @@
{
int idx;
int completed;
+ int completed_end;
static DEFINE_RCU_RANDOM(rand);
static DEFINE_SPINLOCK(rand_lock);
struct rcu_torture *p;
int pipe_count;
+ unsigned long long ts;
idx = cur_ops->readlock();
completed = cur_ops->completed();
+ ts = rcu_trace_clock_local();
p = rcu_dereference_check(rcu_torture_current,
rcu_read_lock_bh_held() ||
rcu_read_lock_sched_held() ||
@@ -1058,7 +1075,6 @@
cur_ops->readunlock(idx);
return;
}
- do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu);
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
spin_lock(&rand_lock);
@@ -1071,10 +1087,14 @@
/* Should not happen, but... */
pipe_count = RCU_TORTURE_PIPE_LEN;
}
- if (pipe_count > 1)
+ completed_end = cur_ops->completed();
+ if (pipe_count > 1) {
+ do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu, ts,
+ completed, completed_end);
rcutorture_trace_dump();
+ }
__this_cpu_inc(rcu_torture_count[pipe_count]);
- completed = cur_ops->completed() - completed;
+ completed = completed_end - completed;
if (completed > RCU_TORTURE_PIPE_LEN) {
/* Should not happen, but... */
completed = RCU_TORTURE_PIPE_LEN;
@@ -1094,11 +1114,13 @@
rcu_torture_reader(void *arg)
{
int completed;
+ int completed_end;
int idx;
DEFINE_RCU_RANDOM(rand);
struct rcu_torture *p;
int pipe_count;
struct timer_list t;
+ unsigned long long ts;
VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
set_user_nice(current, 19);
@@ -1112,6 +1134,7 @@
}
idx = cur_ops->readlock();
completed = cur_ops->completed();
+ ts = rcu_trace_clock_local();
p = rcu_dereference_check(rcu_torture_current,
rcu_read_lock_bh_held() ||
rcu_read_lock_sched_held() ||
@@ -1122,7 +1145,6 @@
schedule_timeout_interruptible(HZ);
continue;
}
- do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu);
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
cur_ops->read_delay(&rand);
@@ -1132,10 +1154,14 @@
/* Should not happen, but... */
pipe_count = RCU_TORTURE_PIPE_LEN;
}
- if (pipe_count > 1)
+ completed_end = cur_ops->completed();
+ if (pipe_count > 1) {
+ do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu,
+ ts, completed, completed_end);
rcutorture_trace_dump();
+ }
__this_cpu_inc(rcu_torture_count[pipe_count]);
- completed = cur_ops->completed() - completed;
+ completed = completed_end - completed;
if (completed > RCU_TORTURE_PIPE_LEN) {
/* Should not happen, but... */
completed = RCU_TORTURE_PIPE_LEN;
@@ -1301,19 +1327,35 @@
set_cpus_allowed_ptr(reader_tasks[i],
shuffle_tmp_mask);
}
-
if (fakewriter_tasks) {
for (i = 0; i < nfakewriters; i++)
if (fakewriter_tasks[i])
set_cpus_allowed_ptr(fakewriter_tasks[i],
shuffle_tmp_mask);
}
-
if (writer_task)
set_cpus_allowed_ptr(writer_task, shuffle_tmp_mask);
-
if (stats_task)
set_cpus_allowed_ptr(stats_task, shuffle_tmp_mask);
+ if (stutter_task)
+ set_cpus_allowed_ptr(stutter_task, shuffle_tmp_mask);
+ if (fqs_task)
+ set_cpus_allowed_ptr(fqs_task, shuffle_tmp_mask);
+ if (shutdown_task)
+ set_cpus_allowed_ptr(shutdown_task, shuffle_tmp_mask);
+#ifdef CONFIG_HOTPLUG_CPU
+ if (onoff_task)
+ set_cpus_allowed_ptr(onoff_task, shuffle_tmp_mask);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+ if (stall_task)
+ set_cpus_allowed_ptr(stall_task, shuffle_tmp_mask);
+ if (barrier_cbs_tasks)
+ for (i = 0; i < n_barrier_cbs; i++)
+ if (barrier_cbs_tasks[i])
+ set_cpus_allowed_ptr(barrier_cbs_tasks[i],
+ shuffle_tmp_mask);
+ if (barrier_task)
+ set_cpus_allowed_ptr(barrier_task, shuffle_tmp_mask);
if (rcu_idle_cpu == -1)
rcu_idle_cpu = num_online_cpus() - 1;
@@ -1749,7 +1791,7 @@
barrier_cbs_wq =
kzalloc(n_barrier_cbs * sizeof(barrier_cbs_wq[0]),
GFP_KERNEL);
- if (barrier_cbs_tasks == NULL || barrier_cbs_wq == 0)
+ if (barrier_cbs_tasks == NULL || !barrier_cbs_wq)
return -ENOMEM;
for (i = 0; i < n_barrier_cbs; i++) {
init_waitqueue_head(&barrier_cbs_wq[i]);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index e441b77..5b8ad82 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -105,7 +105,7 @@
* The rcu_scheduler_active variable transitions from zero to one just
* before the first task is spawned. So when this variable is zero, RCU
* can assume that there is but one task, allowing RCU to (for example)
- * optimized synchronize_sched() to a simple barrier(). When this variable
+ * optimize synchronize_sched() to a simple barrier(). When this variable
* is one, RCU must actually do all the hard work required to detect real
* grace periods. This variable is also used to suppress boot-time false
* positives from lockdep-RCU error checking.
@@ -217,12 +217,6 @@
module_param(qhimark, long, 0444);
module_param(qlowmark, long, 0444);
-int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
-int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
-
-module_param(rcu_cpu_stall_suppress, int, 0644);
-module_param(rcu_cpu_stall_timeout, int, 0644);
-
static ulong jiffies_till_first_fqs = RCU_JIFFIES_TILL_FORCE_QS;
static ulong jiffies_till_next_fqs = RCU_JIFFIES_TILL_FORCE_QS;
@@ -305,17 +299,27 @@
}
/*
- * Does the current CPU require a yet-as-unscheduled grace period?
+ * Does the current CPU require a not-yet-started grace period?
+ * The caller must have disabled interrupts to prevent races with
+ * normal callback registry.
*/
static int
cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp)
{
- struct rcu_head **ntp;
+ int i;
- ntp = rdp->nxttail[RCU_DONE_TAIL +
- (ACCESS_ONCE(rsp->completed) != rdp->completed)];
- return rdp->nxttail[RCU_DONE_TAIL] && ntp && *ntp &&
- !rcu_gp_in_progress(rsp);
+ if (rcu_gp_in_progress(rsp))
+ return 0; /* No, a grace period is already in progress. */
+ if (!rdp->nxttail[RCU_NEXT_TAIL])
+ return 0; /* No, this is a no-CBs (or offline) CPU. */
+ if (*rdp->nxttail[RCU_NEXT_READY_TAIL])
+ return 1; /* Yes, this CPU has newly registered callbacks. */
+ for (i = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++)
+ if (rdp->nxttail[i - 1] != rdp->nxttail[i] &&
+ ULONG_CMP_LT(ACCESS_ONCE(rsp->completed),
+ rdp->nxtcompleted[i]))
+ return 1; /* Yes, CBs for future grace period. */
+ return 0; /* No grace period needed. */
}
/*
@@ -336,7 +340,7 @@
static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
bool user)
{
- trace_rcu_dyntick("Start", oldval, 0);
+ trace_rcu_dyntick("Start", oldval, rdtp->dynticks_nesting);
if (!user && !is_idle_task(current)) {
struct task_struct *idle = idle_task(smp_processor_id());
@@ -727,7 +731,7 @@
* interrupt from idle, return true. The caller must have at least
* disabled preemption.
*/
-int rcu_is_cpu_rrupt_from_idle(void)
+static int rcu_is_cpu_rrupt_from_idle(void)
{
return __get_cpu_var(rcu_dynticks).dynticks_nesting <= 1;
}
@@ -793,28 +797,10 @@
return 0;
}
-static int jiffies_till_stall_check(void)
-{
- int till_stall_check = ACCESS_ONCE(rcu_cpu_stall_timeout);
-
- /*
- * Limit check must be consistent with the Kconfig limits
- * for CONFIG_RCU_CPU_STALL_TIMEOUT.
- */
- if (till_stall_check < 3) {
- ACCESS_ONCE(rcu_cpu_stall_timeout) = 3;
- till_stall_check = 3;
- } else if (till_stall_check > 300) {
- ACCESS_ONCE(rcu_cpu_stall_timeout) = 300;
- till_stall_check = 300;
- }
- return till_stall_check * HZ + RCU_STALL_DELAY_DELTA;
-}
-
static void record_gp_stall_check_time(struct rcu_state *rsp)
{
rsp->gp_start = jiffies;
- rsp->jiffies_stall = jiffies + jiffies_till_stall_check();
+ rsp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check();
}
/*
@@ -857,7 +843,7 @@
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return;
}
- rsp->jiffies_stall = jiffies + 3 * jiffies_till_stall_check() + 3;
+ rsp->jiffies_stall = jiffies + 3 * rcu_jiffies_till_stall_check() + 3;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
/*
@@ -935,7 +921,7 @@
raw_spin_lock_irqsave(&rnp->lock, flags);
if (ULONG_CMP_GE(jiffies, rsp->jiffies_stall))
rsp->jiffies_stall = jiffies +
- 3 * jiffies_till_stall_check() + 3;
+ 3 * rcu_jiffies_till_stall_check() + 3;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
set_need_resched(); /* kick ourselves to get things going. */
@@ -966,12 +952,6 @@
}
}
-static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr)
-{
- rcu_cpu_stall_suppress = 1;
- return NOTIFY_DONE;
-}
-
/**
* rcu_cpu_stall_reset - prevent further stall warnings in current grace period
*
@@ -989,15 +969,6 @@
rsp->jiffies_stall = jiffies + ULONG_MAX / 2;
}
-static struct notifier_block rcu_panic_block = {
- .notifier_call = rcu_panic,
-};
-
-static void __init check_cpu_stall_init(void)
-{
- atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block);
-}
-
/*
* Update CPU-local rcu_data state to record the newly noticed grace period.
* This is used both when we started the grace period and when we notice
@@ -1071,6 +1042,145 @@
}
/*
+ * Determine the value that ->completed will have at the end of the
+ * next subsequent grace period. This is used to tag callbacks so that
+ * a CPU can invoke callbacks in a timely fashion even if that CPU has
+ * been dyntick-idle for an extended period with callbacks under the
+ * influence of RCU_FAST_NO_HZ.
+ *
+ * The caller must hold rnp->lock with interrupts disabled.
+ */
+static unsigned long rcu_cbs_completed(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ /*
+ * If RCU is idle, we just wait for the next grace period.
+ * But we can only be sure that RCU is idle if we are looking
+ * at the root rcu_node structure -- otherwise, a new grace
+ * period might have started, but just not yet gotten around
+ * to initializing the current non-root rcu_node structure.
+ */
+ if (rcu_get_root(rsp) == rnp && rnp->gpnum == rnp->completed)
+ return rnp->completed + 1;
+
+ /*
+ * Otherwise, wait for a possible partial grace period and
+ * then the subsequent full grace period.
+ */
+ return rnp->completed + 2;
+}
+
+/*
+ * If there is room, assign a ->completed number to any callbacks on
+ * this CPU that have not already been assigned. Also accelerate any
+ * callbacks that were previously assigned a ->completed number that has
+ * since proven to be too conservative, which can happen if callbacks get
+ * assigned a ->completed number while RCU is idle, but with reference to
+ * a non-root rcu_node structure. This function is idempotent, so it does
+ * not hurt to call it repeatedly.
+ *
+ * The caller must hold rnp->lock with interrupts disabled.
+ */
+static void rcu_accelerate_cbs(struct rcu_state *rsp, struct rcu_node *rnp,
+ struct rcu_data *rdp)
+{
+ unsigned long c;
+ int i;
+
+ /* If the CPU has no callbacks, nothing to do. */
+ if (!rdp->nxttail[RCU_NEXT_TAIL] || !*rdp->nxttail[RCU_DONE_TAIL])
+ return;
+
+ /*
+ * Starting from the sublist containing the callbacks most
+ * recently assigned a ->completed number and working down, find the
+ * first sublist that is not assignable to an upcoming grace period.
+ * Such a sublist has something in it (first two tests) and has
+ * a ->completed number assigned that will complete sooner than
+ * the ->completed number for newly arrived callbacks (last test).
+ *
+ * The key point is that any later sublist can be assigned the
+ * same ->completed number as the newly arrived callbacks, which
+ * means that the callbacks in any of these later sublist can be
+ * grouped into a single sublist, whether or not they have already
+ * been assigned a ->completed number.
+ */
+ c = rcu_cbs_completed(rsp, rnp);
+ for (i = RCU_NEXT_TAIL - 1; i > RCU_DONE_TAIL; i--)
+ if (rdp->nxttail[i] != rdp->nxttail[i - 1] &&
+ !ULONG_CMP_GE(rdp->nxtcompleted[i], c))
+ break;
+
+ /*
+ * If there are no sublist for unassigned callbacks, leave.
+ * At the same time, advance "i" one sublist, so that "i" will
+ * index into the sublist where all the remaining callbacks should
+ * be grouped into.
+ */
+ if (++i >= RCU_NEXT_TAIL)
+ return;
+
+ /*
+ * Assign all subsequent callbacks' ->completed number to the next
+ * full grace period and group them all in the sublist initially
+ * indexed by "i".
+ */
+ for (; i <= RCU_NEXT_TAIL; i++) {
+ rdp->nxttail[i] = rdp->nxttail[RCU_NEXT_TAIL];
+ rdp->nxtcompleted[i] = c;
+ }
+
+ /* Trace depending on how much we were able to accelerate. */
+ if (!*rdp->nxttail[RCU_WAIT_TAIL])
+ trace_rcu_grace_period(rsp->name, rdp->gpnum, "AccWaitCB");
+ else
+ trace_rcu_grace_period(rsp->name, rdp->gpnum, "AccReadyCB");
+}
+
+/*
+ * Move any callbacks whose grace period has completed to the
+ * RCU_DONE_TAIL sublist, then compact the remaining sublists and
+ * assign ->completed numbers to any callbacks in the RCU_NEXT_TAIL
+ * sublist. This function is idempotent, so it does not hurt to
+ * invoke it repeatedly. As long as it is not invoked -too- often...
+ *
+ * The caller must hold rnp->lock with interrupts disabled.
+ */
+static void rcu_advance_cbs(struct rcu_state *rsp, struct rcu_node *rnp,
+ struct rcu_data *rdp)
+{
+ int i, j;
+
+ /* If the CPU has no callbacks, nothing to do. */
+ if (!rdp->nxttail[RCU_NEXT_TAIL] || !*rdp->nxttail[RCU_DONE_TAIL])
+ return;
+
+ /*
+ * Find all callbacks whose ->completed numbers indicate that they
+ * are ready to invoke, and put them into the RCU_DONE_TAIL sublist.
+ */
+ for (i = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++) {
+ if (ULONG_CMP_LT(rnp->completed, rdp->nxtcompleted[i]))
+ break;
+ rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[i];
+ }
+ /* Clean up any sublist tail pointers that were misordered above. */
+ for (j = RCU_WAIT_TAIL; j < i; j++)
+ rdp->nxttail[j] = rdp->nxttail[RCU_DONE_TAIL];
+
+ /* Copy down callbacks to fill in empty sublists. */
+ for (j = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++, j++) {
+ if (rdp->nxttail[j] == rdp->nxttail[RCU_NEXT_TAIL])
+ break;
+ rdp->nxttail[j] = rdp->nxttail[i];
+ rdp->nxtcompleted[j] = rdp->nxtcompleted[i];
+ }
+
+ /* Classify any remaining callbacks. */
+ rcu_accelerate_cbs(rsp, rnp, rdp);
+}
+
+/*
* Advance this CPU's callbacks, but only if the current grace period
* has ended. This may be called only from the CPU to whom the rdp
* belongs. In addition, the corresponding leaf rcu_node structure's
@@ -1080,12 +1190,15 @@
__rcu_process_gp_end(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
{
/* Did another grace period end? */
- if (rdp->completed != rnp->completed) {
+ if (rdp->completed == rnp->completed) {
- /* Advance callbacks. No harm if list empty. */
- rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[RCU_WAIT_TAIL];
- rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_READY_TAIL];
- rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
+ /* No, so just accelerate recent callbacks. */
+ rcu_accelerate_cbs(rsp, rnp, rdp);
+
+ } else {
+
+ /* Advance callbacks. */
+ rcu_advance_cbs(rsp, rnp, rdp);
/* Remember that we saw this grace-period completion. */
rdp->completed = rnp->completed;
@@ -1392,17 +1505,10 @@
/*
* Because there is no grace period in progress right now,
* any callbacks we have up to this point will be satisfied
- * by the next grace period. So promote all callbacks to be
- * handled after the end of the next grace period. If the
- * CPU is not yet aware of the end of the previous grace period,
- * we need to allow for the callback advancement that will
- * occur when it does become aware. Deadlock prevents us from
- * making it aware at this point: We cannot acquire a leaf
- * rcu_node ->lock while holding the root rcu_node ->lock.
+ * by the next grace period. So this is a good place to
+ * assign a grace period number to recently posted callbacks.
*/
- rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
- if (rdp->completed == rsp->completed)
- rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
+ rcu_accelerate_cbs(rsp, rnp, rdp);
rsp->gp_flags = RCU_GP_FLAG_INIT;
raw_spin_unlock(&rnp->lock); /* Interrupts remain disabled. */
@@ -1527,7 +1633,7 @@
* This GP can't end until cpu checks in, so all of our
* callbacks can be processed during the next GP.
*/
- rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
+ rcu_accelerate_cbs(rsp, rnp, rdp);
rcu_report_qs_rnp(mask, rsp, rnp, flags); /* rlses rnp->lock */
}
@@ -1779,7 +1885,7 @@
long bl, count, count_lazy;
int i;
- /* If no callbacks are ready, just return.*/
+ /* If no callbacks are ready, just return. */
if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
trace_rcu_batch_start(rsp->name, rdp->qlen_lazy, rdp->qlen, 0);
trace_rcu_batch_end(rsp->name, 0, !!ACCESS_ONCE(rdp->nxtlist),
@@ -2008,19 +2114,19 @@
WARN_ON_ONCE(rdp->beenonline == 0);
- /*
- * Advance callbacks in response to end of earlier grace
- * period that some other CPU ended.
- */
+ /* Handle the end of a grace period that some other CPU ended. */
rcu_process_gp_end(rsp, rdp);
/* Update RCU state based on any recent quiescent states. */
rcu_check_quiescent_state(rsp, rdp);
/* Does this CPU require a not-yet-started grace period? */
+ local_irq_save(flags);
if (cpu_needs_another_gp(rsp, rdp)) {
- raw_spin_lock_irqsave(&rcu_get_root(rsp)->lock, flags);
+ raw_spin_lock(&rcu_get_root(rsp)->lock); /* irqs disabled. */
rcu_start_gp(rsp, flags); /* releases above lock */
+ } else {
+ local_irq_restore(flags);
}
/* If there are callbacks ready, invoke them. */
@@ -2719,9 +2825,6 @@
rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_EXIT_IDLE);
WARN_ON_ONCE(atomic_read(&rdp->dynticks->dynticks) != 1);
-#ifdef CONFIG_RCU_USER_QS
- WARN_ON_ONCE(rdp->dynticks->in_user);
-#endif
rdp->cpu = cpu;
rdp->rsp = rsp;
rcu_boot_init_nocb_percpu_data(rdp);
@@ -2938,6 +3041,10 @@
BUILD_BUG_ON(MAX_RCU_LVLS > ARRAY_SIZE(buf)); /* Fix buf[] init! */
+ /* Silence gcc 4.8 warning about array index out of range. */
+ if (rcu_num_lvls > RCU_NUM_LVLS)
+ panic("rcu_init_one: rcu_num_lvls overflow");
+
/* Initialize the level-tracking arrays. */
for (i = 0; i < rcu_num_lvls; i++)
@@ -3074,7 +3181,6 @@
cpu_notifier(rcu_cpu_notify, 0);
for_each_online_cpu(cpu)
rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
- check_cpu_stall_init();
}
#include "rcutree_plugin.h"
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 4b69291..c896b50 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -102,10 +102,6 @@
/* idle-period nonlazy_posted snapshot. */
int tick_nohz_enabled_snap; /* Previously seen value from sysfs. */
#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
-#ifdef CONFIG_RCU_USER_QS
- bool ignore_user_qs; /* Treat userspace as extended QS or not */
- bool in_user; /* Is the CPU in userland from RCU POV? */
-#endif
};
/* RCU's kthread states for tracing. */
@@ -282,6 +278,8 @@
*/
struct rcu_head *nxtlist;
struct rcu_head **nxttail[RCU_NEXT_SIZE];
+ unsigned long nxtcompleted[RCU_NEXT_SIZE];
+ /* grace periods for sublists. */
long qlen_lazy; /* # of lazy queued callbacks */
long qlen; /* # of queued callbacks, incl lazy */
long qlen_last_fqs_check;
@@ -343,11 +341,6 @@
#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
-#ifdef CONFIG_PROVE_RCU
-#define RCU_STALL_DELAY_DELTA (5 * HZ)
-#else
-#define RCU_STALL_DELAY_DELTA 0
-#endif
#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */
/* to take at least one */
/* scheduling clock irq */
diff --git a/kernel/rtmutex-debug.c b/kernel/rtmutex-debug.c
index 16502d3..13b243a 100644
--- a/kernel/rtmutex-debug.c
+++ b/kernel/rtmutex-debug.c
@@ -17,6 +17,7 @@
* See rt.c in preempt-rt for proper credits and further information
*/
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/spinlock.h>
diff --git a/kernel/rtmutex-tester.c b/kernel/rtmutex-tester.c
index 98ec494..7890b10 100644
--- a/kernel/rtmutex-tester.c
+++ b/kernel/rtmutex-tester.c
@@ -10,6 +10,7 @@
#include <linux/kthread.h>
#include <linux/export.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/freezer.h>
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index a242e69..1e09308 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -13,6 +13,7 @@
#include <linux/spinlock.h>
#include <linux/export.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/timer.h>
#include "rtmutex_common.h"
diff --git a/kernel/sched/auto_group.c b/kernel/sched/auto_group.c
index 0984a21..64de5f8 100644
--- a/kernel/sched/auto_group.c
+++ b/kernel/sched/auto_group.c
@@ -35,6 +35,7 @@
ag->tg->rt_se = NULL;
ag->tg->rt_rq = NULL;
#endif
+ sched_offline_group(ag->tg);
sched_destroy_group(ag->tg);
}
@@ -76,6 +77,8 @@
if (IS_ERR(tg))
goto out_free;
+ sched_online_group(tg, &root_task_group);
+
kref_init(&ag->kref);
init_rwsem(&ag->lock);
ag->id = atomic_inc_return(&autogroup_seq_nr);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 26058d0..3a673a3 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -83,7 +83,7 @@
#endif
#include "sched.h"
-#include "../workqueue_sched.h"
+#include "../workqueue_internal.h"
#include "../smpboot.h"
#define CREATE_TRACE_POINTS
@@ -4371,7 +4371,7 @@
struct task_struct *curr = current;
struct rq *rq, *p_rq;
unsigned long flags;
- bool yielded = 0;
+ int yielded = 0;
local_irq_save(flags);
rq = this_rq();
@@ -4667,6 +4667,7 @@
*/
idle->sched_class = &idle_sched_class;
ftrace_graph_init_idle_task(idle, cpu);
+ vtime_init_idle(idle);
#if defined(CONFIG_SMP)
sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu);
#endif
@@ -7160,7 +7161,6 @@
struct task_group *sched_create_group(struct task_group *parent)
{
struct task_group *tg;
- unsigned long flags;
tg = kzalloc(sizeof(*tg), GFP_KERNEL);
if (!tg)
@@ -7172,6 +7172,17 @@
if (!alloc_rt_sched_group(tg, parent))
goto err;
+ return tg;
+
+err:
+ free_sched_group(tg);
+ return ERR_PTR(-ENOMEM);
+}
+
+void sched_online_group(struct task_group *tg, struct task_group *parent)
+{
+ unsigned long flags;
+
spin_lock_irqsave(&task_group_lock, flags);
list_add_rcu(&tg->list, &task_groups);
@@ -7181,12 +7192,6 @@
INIT_LIST_HEAD(&tg->children);
list_add_rcu(&tg->siblings, &parent->children);
spin_unlock_irqrestore(&task_group_lock, flags);
-
- return tg;
-
-err:
- free_sched_group(tg);
- return ERR_PTR(-ENOMEM);
}
/* rcu callback to free various structures associated with a task group */
@@ -7199,6 +7204,12 @@
/* Destroy runqueue etc associated with a task group */
void sched_destroy_group(struct task_group *tg)
{
+ /* wait for possible concurrent references to cfs_rqs complete */
+ call_rcu(&tg->rcu, free_sched_group_rcu);
+}
+
+void sched_offline_group(struct task_group *tg)
+{
unsigned long flags;
int i;
@@ -7210,9 +7221,6 @@
list_del_rcu(&tg->list);
list_del_rcu(&tg->siblings);
spin_unlock_irqrestore(&task_group_lock, flags);
-
- /* wait for possible concurrent references to cfs_rqs complete */
- call_rcu(&tg->rcu, free_sched_group_rcu);
}
/* change task's runqueue when it moves between groups.
@@ -7508,6 +7516,25 @@
}
#endif /* CONFIG_RT_GROUP_SCHED */
+int sched_rr_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+ static DEFINE_MUTEX(mutex);
+
+ mutex_lock(&mutex);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ /* make sure that internally we keep jiffies */
+ /* also, writing zero resets timeslice to default */
+ if (!ret && write) {
+ sched_rr_timeslice = sched_rr_timeslice <= 0 ?
+ RR_TIMESLICE : msecs_to_jiffies(sched_rr_timeslice);
+ }
+ mutex_unlock(&mutex);
+ return ret;
+}
+
int sched_rt_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
@@ -7564,6 +7591,19 @@
return &tg->css;
}
+static int cpu_cgroup_css_online(struct cgroup *cgrp)
+{
+ struct task_group *tg = cgroup_tg(cgrp);
+ struct task_group *parent;
+
+ if (!cgrp->parent)
+ return 0;
+
+ parent = cgroup_tg(cgrp->parent);
+ sched_online_group(tg, parent);
+ return 0;
+}
+
static void cpu_cgroup_css_free(struct cgroup *cgrp)
{
struct task_group *tg = cgroup_tg(cgrp);
@@ -7571,6 +7611,13 @@
sched_destroy_group(tg);
}
+static void cpu_cgroup_css_offline(struct cgroup *cgrp)
+{
+ struct task_group *tg = cgroup_tg(cgrp);
+
+ sched_offline_group(tg);
+}
+
static int cpu_cgroup_can_attach(struct cgroup *cgrp,
struct cgroup_taskset *tset)
{
@@ -7926,6 +7973,8 @@
.name = "cpu",
.css_alloc = cpu_cgroup_css_alloc,
.css_free = cpu_cgroup_css_free,
+ .css_online = cpu_cgroup_css_online,
+ .css_offline = cpu_cgroup_css_offline,
.can_attach = cpu_cgroup_can_attach,
.attach = cpu_cgroup_attach,
.exit = cpu_cgroup_exit,
diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c
index 23aa789..1095e87 100644
--- a/kernel/sched/cpupri.c
+++ b/kernel/sched/cpupri.c
@@ -28,6 +28,8 @@
*/
#include <linux/gfp.h>
+#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include "cpupri.h"
/* Convert between a 140 based task->prio, and our 102 based cpupri */
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 293b202..9857329 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -3,6 +3,7 @@
#include <linux/tsacct_kern.h>
#include <linux/kernel_stat.h>
#include <linux/static_key.h>
+#include <linux/context_tracking.h>
#include "sched.h"
@@ -163,7 +164,7 @@
task_group_account_field(p, index, (__force u64) cputime);
/* Account for user time used */
- acct_update_integrals(p);
+ acct_account_cputime(p);
}
/*
@@ -213,7 +214,7 @@
task_group_account_field(p, index, (__force u64) cputime);
/* Account for system time used */
- acct_update_integrals(p);
+ acct_account_cputime(p);
}
/*
@@ -295,6 +296,7 @@
void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
{
struct signal_struct *sig = tsk->signal;
+ cputime_t utime, stime;
struct task_struct *t;
times->utime = sig->utime;
@@ -308,16 +310,15 @@
t = tsk;
do {
- times->utime += t->utime;
- times->stime += t->stime;
+ task_cputime(tsk, &utime, &stime);
+ times->utime += utime;
+ times->stime += stime;
times->sum_exec_runtime += task_sched_runtime(t);
} while_each_thread(tsk, t);
out:
rcu_read_unlock();
}
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
/*
* Account a tick to a process and cpustat
@@ -382,11 +383,12 @@
irqtime_account_process_tick(current, 0, rq);
}
#else /* CONFIG_IRQ_TIME_ACCOUNTING */
-static void irqtime_account_idle_ticks(int ticks) {}
-static void irqtime_account_process_tick(struct task_struct *p, int user_tick,
+static inline void irqtime_account_idle_ticks(int ticks) {}
+static inline void irqtime_account_process_tick(struct task_struct *p, int user_tick,
struct rq *rq) {}
#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Account a single tick of cpu time.
* @p: the process that the cpu time gets accounted to
@@ -397,6 +399,9 @@
cputime_t one_jiffy_scaled = cputime_to_scaled(cputime_one_jiffy);
struct rq *rq = this_rq();
+ if (vtime_accounting_enabled())
+ return;
+
if (sched_clock_irqtime) {
irqtime_account_process_tick(p, user_tick, rq);
return;
@@ -438,8 +443,7 @@
account_idle_time(jiffies_to_cputime(ticks));
}
-
-#endif
+#endif /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
/*
* Use precise platform statistics if available:
@@ -461,25 +465,20 @@
*st = cputime.stime;
}
-void vtime_account_system_irqsafe(struct task_struct *tsk)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- vtime_account_system(tsk);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL_GPL(vtime_account_system_irqsafe);
-
#ifndef __ARCH_HAS_VTIME_TASK_SWITCH
void vtime_task_switch(struct task_struct *prev)
{
+ if (!vtime_accounting_enabled())
+ return;
+
if (is_idle_task(prev))
vtime_account_idle(prev);
else
vtime_account_system(prev);
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
vtime_account_user(prev);
+#endif
arch_vtime_task_switch(prev);
}
#endif
@@ -493,27 +492,40 @@
* vtime_account().
*/
#ifndef __ARCH_HAS_VTIME_ACCOUNT
-void vtime_account(struct task_struct *tsk)
+void vtime_account_irq_enter(struct task_struct *tsk)
{
- if (in_interrupt() || !is_idle_task(tsk))
- vtime_account_system(tsk);
- else
- vtime_account_idle(tsk);
+ if (!vtime_accounting_enabled())
+ return;
+
+ if (!in_interrupt()) {
+ /*
+ * If we interrupted user, context_tracking_in_user()
+ * is 1 because the context tracking don't hook
+ * on irq entry/exit. This way we know if
+ * we need to flush user time on kernel entry.
+ */
+ if (context_tracking_in_user()) {
+ vtime_account_user(tsk);
+ return;
+ }
+
+ if (is_idle_task(tsk)) {
+ vtime_account_idle(tsk);
+ return;
+ }
+ }
+ vtime_account_system(tsk);
}
-EXPORT_SYMBOL_GPL(vtime_account);
+EXPORT_SYMBOL_GPL(vtime_account_irq_enter);
#endif /* __ARCH_HAS_VTIME_ACCOUNT */
-#else
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
-#ifndef nsecs_to_cputime
-# define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs)
-#endif
-
-static cputime_t scale_utime(cputime_t utime, cputime_t rtime, cputime_t total)
+static cputime_t scale_stime(cputime_t stime, cputime_t rtime, cputime_t total)
{
u64 temp = (__force u64) rtime;
- temp *= (__force u64) utime;
+ temp *= (__force u64) stime;
if (sizeof(cputime_t) == 4)
temp = div_u64(temp, (__force u32) total);
@@ -531,10 +543,10 @@
struct cputime *prev,
cputime_t *ut, cputime_t *st)
{
- cputime_t rtime, utime, total;
+ cputime_t rtime, stime, total;
- utime = curr->utime;
- total = utime + curr->stime;
+ stime = curr->stime;
+ total = stime + curr->utime;
/*
* Tick based cputime accounting depend on random scheduling
@@ -549,17 +561,17 @@
rtime = nsecs_to_cputime(curr->sum_exec_runtime);
if (total)
- utime = scale_utime(utime, rtime, total);
+ stime = scale_stime(stime, rtime, total);
else
- utime = rtime;
+ stime = rtime;
/*
* If the tick based count grows faster than the scheduler one,
* the result of the scaling may go backward.
* Let's enforce monotonicity.
*/
- prev->utime = max(prev->utime, utime);
- prev->stime = max(prev->stime, rtime - prev->utime);
+ prev->stime = max(prev->stime, stime);
+ prev->utime = max(prev->utime, rtime - prev->stime);
*ut = prev->utime;
*st = prev->stime;
@@ -568,11 +580,10 @@
void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st)
{
struct task_cputime cputime = {
- .utime = p->utime,
- .stime = p->stime,
.sum_exec_runtime = p->se.sum_exec_runtime,
};
+ task_cputime(p, &cputime.utime, &cputime.stime);
cputime_adjust(&cputime, &p->prev_cputime, ut, st);
}
@@ -586,4 +597,221 @@
thread_group_cputime(p, &cputime);
cputime_adjust(&cputime, &p->signal->prev_cputime, ut, st);
}
-#endif
+#endif /* !CONFIG_VIRT_CPU_ACCOUNTING */
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+static unsigned long long vtime_delta(struct task_struct *tsk)
+{
+ unsigned long long clock;
+
+ clock = sched_clock();
+ if (clock < tsk->vtime_snap)
+ return 0;
+
+ return clock - tsk->vtime_snap;
+}
+
+static cputime_t get_vtime_delta(struct task_struct *tsk)
+{
+ unsigned long long delta = vtime_delta(tsk);
+
+ WARN_ON_ONCE(tsk->vtime_snap_whence == VTIME_SLEEPING);
+ tsk->vtime_snap += delta;
+
+ /* CHECKME: always safe to convert nsecs to cputime? */
+ return nsecs_to_cputime(delta);
+}
+
+static void __vtime_account_system(struct task_struct *tsk)
+{
+ cputime_t delta_cpu = get_vtime_delta(tsk);
+
+ account_system_time(tsk, irq_count(), delta_cpu, cputime_to_scaled(delta_cpu));
+}
+
+void vtime_account_system(struct task_struct *tsk)
+{
+ if (!vtime_accounting_enabled())
+ return;
+
+ write_seqlock(&tsk->vtime_seqlock);
+ __vtime_account_system(tsk);
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_account_irq_exit(struct task_struct *tsk)
+{
+ if (!vtime_accounting_enabled())
+ return;
+
+ write_seqlock(&tsk->vtime_seqlock);
+ if (context_tracking_in_user())
+ tsk->vtime_snap_whence = VTIME_USER;
+ __vtime_account_system(tsk);
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_account_user(struct task_struct *tsk)
+{
+ cputime_t delta_cpu;
+
+ if (!vtime_accounting_enabled())
+ return;
+
+ delta_cpu = get_vtime_delta(tsk);
+
+ write_seqlock(&tsk->vtime_seqlock);
+ tsk->vtime_snap_whence = VTIME_SYS;
+ account_user_time(tsk, delta_cpu, cputime_to_scaled(delta_cpu));
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_user_enter(struct task_struct *tsk)
+{
+ if (!vtime_accounting_enabled())
+ return;
+
+ write_seqlock(&tsk->vtime_seqlock);
+ tsk->vtime_snap_whence = VTIME_USER;
+ __vtime_account_system(tsk);
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_guest_enter(struct task_struct *tsk)
+{
+ write_seqlock(&tsk->vtime_seqlock);
+ __vtime_account_system(tsk);
+ current->flags |= PF_VCPU;
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_guest_exit(struct task_struct *tsk)
+{
+ write_seqlock(&tsk->vtime_seqlock);
+ __vtime_account_system(tsk);
+ current->flags &= ~PF_VCPU;
+ write_sequnlock(&tsk->vtime_seqlock);
+}
+
+void vtime_account_idle(struct task_struct *tsk)
+{
+ cputime_t delta_cpu = get_vtime_delta(tsk);
+
+ account_idle_time(delta_cpu);
+}
+
+bool vtime_accounting_enabled(void)
+{
+ return context_tracking_active();
+}
+
+void arch_vtime_task_switch(struct task_struct *prev)
+{
+ write_seqlock(&prev->vtime_seqlock);
+ prev->vtime_snap_whence = VTIME_SLEEPING;
+ write_sequnlock(&prev->vtime_seqlock);
+
+ write_seqlock(¤t->vtime_seqlock);
+ current->vtime_snap_whence = VTIME_SYS;
+ current->vtime_snap = sched_clock();
+ write_sequnlock(¤t->vtime_seqlock);
+}
+
+void vtime_init_idle(struct task_struct *t)
+{
+ unsigned long flags;
+
+ write_seqlock_irqsave(&t->vtime_seqlock, flags);
+ t->vtime_snap_whence = VTIME_SYS;
+ t->vtime_snap = sched_clock();
+ write_sequnlock_irqrestore(&t->vtime_seqlock, flags);
+}
+
+cputime_t task_gtime(struct task_struct *t)
+{
+ unsigned int seq;
+ cputime_t gtime;
+
+ do {
+ seq = read_seqbegin(&t->vtime_seqlock);
+
+ gtime = t->gtime;
+ if (t->flags & PF_VCPU)
+ gtime += vtime_delta(t);
+
+ } while (read_seqretry(&t->vtime_seqlock, seq));
+
+ return gtime;
+}
+
+/*
+ * Fetch cputime raw values from fields of task_struct and
+ * add up the pending nohz execution time since the last
+ * cputime snapshot.
+ */
+static void
+fetch_task_cputime(struct task_struct *t,
+ cputime_t *u_dst, cputime_t *s_dst,
+ cputime_t *u_src, cputime_t *s_src,
+ cputime_t *udelta, cputime_t *sdelta)
+{
+ unsigned int seq;
+ unsigned long long delta;
+
+ do {
+ *udelta = 0;
+ *sdelta = 0;
+
+ seq = read_seqbegin(&t->vtime_seqlock);
+
+ if (u_dst)
+ *u_dst = *u_src;
+ if (s_dst)
+ *s_dst = *s_src;
+
+ /* Task is sleeping, nothing to add */
+ if (t->vtime_snap_whence == VTIME_SLEEPING ||
+ is_idle_task(t))
+ continue;
+
+ delta = vtime_delta(t);
+
+ /*
+ * Task runs either in user or kernel space, add pending nohz time to
+ * the right place.
+ */
+ if (t->vtime_snap_whence == VTIME_USER || t->flags & PF_VCPU) {
+ *udelta = delta;
+ } else {
+ if (t->vtime_snap_whence == VTIME_SYS)
+ *sdelta = delta;
+ }
+ } while (read_seqretry(&t->vtime_seqlock, seq));
+}
+
+
+void task_cputime(struct task_struct *t, cputime_t *utime, cputime_t *stime)
+{
+ cputime_t udelta, sdelta;
+
+ fetch_task_cputime(t, utime, stime, &t->utime,
+ &t->stime, &udelta, &sdelta);
+ if (utime)
+ *utime += udelta;
+ if (stime)
+ *stime += sdelta;
+}
+
+void task_cputime_scaled(struct task_struct *t,
+ cputime_t *utimescaled, cputime_t *stimescaled)
+{
+ cputime_t udelta, sdelta;
+
+ fetch_task_cputime(t, utimescaled, stimescaled,
+ &t->utimescaled, &t->stimescaled, &udelta, &sdelta);
+ if (utimescaled)
+ *utimescaled += cputime_to_scaled(udelta);
+ if (stimescaled)
+ *stimescaled += cputime_to_scaled(sdelta);
+}
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 7ae4c4c..557e7b5 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -110,13 +110,6 @@
if (autogroup_path(tg, group_path, PATH_MAX))
return group_path;
- /*
- * May be NULL if the underlying cgroup isn't fully-created yet
- */
- if (!tg->css.cgroup) {
- group_path[0] = '\0';
- return group_path;
- }
cgroup_path(tg->css.cgroup, group_path, PATH_MAX);
return group_path;
}
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 81fa536..7a33e59 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -1680,9 +1680,7 @@
}
/* ensure we never gain time by being placed backwards. */
- vruntime = max_vruntime(se->vruntime, vruntime);
-
- se->vruntime = vruntime;
+ se->vruntime = max_vruntime(se->vruntime, vruntime);
}
static void check_enqueue_throttle(struct cfs_rq *cfs_rq);
@@ -3254,25 +3252,18 @@
*/
static int select_idle_sibling(struct task_struct *p, int target)
{
- int cpu = smp_processor_id();
- int prev_cpu = task_cpu(p);
struct sched_domain *sd;
struct sched_group *sg;
- int i;
+ int i = task_cpu(p);
+
+ if (idle_cpu(target))
+ return target;
/*
- * If the task is going to be woken-up on this cpu and if it is
- * already idle, then it is the right target.
+ * If the prevous cpu is cache affine and idle, don't be stupid.
*/
- if (target == cpu && idle_cpu(cpu))
- return cpu;
-
- /*
- * If the task is going to be woken-up on the cpu where it previously
- * ran and if it is currently idle, then it the right target.
- */
- if (target == prev_cpu && idle_cpu(prev_cpu))
- return prev_cpu;
+ if (i != target && cpus_share_cache(i, target) && idle_cpu(i))
+ return i;
/*
* Otherwise, iterate the domains and find an elegible idle cpu.
@@ -3286,7 +3277,7 @@
goto next;
for_each_cpu(i, sched_group_cpus(sg)) {
- if (!idle_cpu(i))
+ if (i == target || !idle_cpu(i))
goto next;
}
@@ -6101,7 +6092,7 @@
* idle runqueue:
*/
if (rq->cfs.load.weight)
- rr_interval = NS_TO_JIFFIES(sched_slice(&rq->cfs, se));
+ rr_interval = NS_TO_JIFFIES(sched_slice(cfs_rq_of(se), se));
return rr_interval;
}
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 4f02b28..127a2c4 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -7,6 +7,8 @@
#include <linux/slab.h>
+int sched_rr_timeslice = RR_TIMESLICE;
+
static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun);
struct rt_bandwidth def_rt_bandwidth;
@@ -925,8 +927,8 @@
return;
delta_exec = rq->clock_task - curr->se.exec_start;
- if (unlikely((s64)delta_exec < 0))
- delta_exec = 0;
+ if (unlikely((s64)delta_exec <= 0))
+ return;
schedstat_set(curr->se.statistics.exec_max,
max(curr->se.statistics.exec_max, delta_exec));
@@ -1427,8 +1429,7 @@
static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu)
{
if (!task_running(rq, p) &&
- (cpu < 0 || cpumask_test_cpu(cpu, tsk_cpus_allowed(p))) &&
- (p->nr_cpus_allowed > 1))
+ cpumask_test_cpu(cpu, tsk_cpus_allowed(p)))
return 1;
return 0;
}
@@ -1889,8 +1890,11 @@
* we may need to handle the pulling of RT tasks
* now.
*/
- if (p->on_rq && !rq->rt.rt_nr_running)
- pull_rt_task(rq);
+ if (!p->on_rq || rq->rt.rt_nr_running)
+ return;
+
+ if (pull_rt_task(rq))
+ resched_task(rq->curr);
}
void init_sched_rt_class(void)
@@ -1985,7 +1989,11 @@
if (soft != RLIM_INFINITY) {
unsigned long next;
- p->rt.timeout++;
+ if (p->rt.watchdog_stamp != jiffies) {
+ p->rt.timeout++;
+ p->rt.watchdog_stamp = jiffies;
+ }
+
next = DIV_ROUND_UP(min(soft, hard), USEC_PER_SEC/HZ);
if (p->rt.timeout > next)
p->cputime_expires.sched_exp = p->se.sum_exec_runtime;
@@ -2010,7 +2018,7 @@
if (--p->rt.time_slice)
return;
- p->rt.time_slice = RR_TIMESLICE;
+ p->rt.time_slice = sched_rr_timeslice;
/*
* Requeue to the end of queue if we (and all of our ancestors) are the
@@ -2041,7 +2049,7 @@
* Time slice is 0 for SCHED_FIFO tasks
*/
if (task->policy == SCHED_RR)
- return RR_TIMESLICE;
+ return sched_rr_timeslice;
else
return 0;
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index fc88644..cc03cfd 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1,5 +1,7 @@
#include <linux/sched.h>
+#include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/stop_machine.h>
diff --git a/kernel/signal.c b/kernel/signal.c
index 3d09cf6..7f82adb 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1632,6 +1632,7 @@
unsigned long flags;
struct sighand_struct *psig;
bool autoreap = false;
+ cputime_t utime, stime;
BUG_ON(sig == -1);
@@ -1669,8 +1670,9 @@
task_uid(tsk));
rcu_read_unlock();
- info.si_utime = cputime_to_clock_t(tsk->utime + tsk->signal->utime);
- info.si_stime = cputime_to_clock_t(tsk->stime + tsk->signal->stime);
+ task_cputime(tsk, &utime, &stime);
+ info.si_utime = cputime_to_clock_t(utime + tsk->signal->utime);
+ info.si_stime = cputime_to_clock_t(stime + tsk->signal->stime);
info.si_status = tsk->exit_code & 0x7f;
if (tsk->exit_code & 0x80)
@@ -1734,6 +1736,7 @@
unsigned long flags;
struct task_struct *parent;
struct sighand_struct *sighand;
+ cputime_t utime, stime;
if (for_ptracer) {
parent = tsk->parent;
@@ -1752,8 +1755,9 @@
info.si_uid = from_kuid_munged(task_cred_xxx(parent, user_ns), task_uid(tsk));
rcu_read_unlock();
- info.si_utime = cputime_to_clock_t(tsk->utime);
- info.si_stime = cputime_to_clock_t(tsk->stime);
+ task_cputime(tsk, &utime, &stime);
+ info.si_utime = cputime_to_clock_t(utime);
+ info.si_stime = cputime_to_clock_t(stime);
info.si_code = why;
switch (why) {
diff --git a/kernel/smpboot.c b/kernel/smpboot.c
index d6c5fc0..d4abac2 100644
--- a/kernel/smpboot.c
+++ b/kernel/smpboot.c
@@ -183,9 +183,10 @@
kfree(td);
return PTR_ERR(tsk);
}
-
get_task_struct(tsk);
*per_cpu_ptr(ht->store, cpu) = tsk;
+ if (ht->create)
+ ht->create(cpu);
return 0;
}
@@ -225,7 +226,7 @@
{
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
- if (tsk)
+ if (tsk && !ht->selfparking)
kthread_park(tsk);
}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 47cb991..b4d252f 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -221,7 +221,7 @@
current->flags &= ~PF_MEMALLOC;
pending = local_softirq_pending();
- vtime_account_irq_enter(current);
+ account_irq_enter_time(current);
__local_bh_disable((unsigned long)__builtin_return_address(0),
SOFTIRQ_OFFSET);
@@ -273,7 +273,7 @@
lockdep_softirq_exit();
- vtime_account_irq_exit(current);
+ account_irq_exit_time(current);
__local_bh_enable(SOFTIRQ_OFFSET);
tsk_restore_flags(current, old_flags, PF_MEMALLOC);
}
@@ -342,7 +342,7 @@
*/
void irq_exit(void)
{
- vtime_account_irq_exit(current);
+ account_irq_exit_time(current);
trace_hardirq_exit();
sub_preempt_count(IRQ_EXIT_OFFSET);
if (!in_interrupt() && local_softirq_pending())
diff --git a/kernel/srcu.c b/kernel/srcu.c
index 2b85982..01d5ccb 100644
--- a/kernel/srcu.c
+++ b/kernel/srcu.c
@@ -282,12 +282,8 @@
*/
void cleanup_srcu_struct(struct srcu_struct *sp)
{
- int sum;
-
- sum = srcu_readers_active(sp);
- WARN_ON(sum); /* Leakage unless caller handles error. */
- if (sum != 0)
- return;
+ if (WARN_ON(srcu_readers_active(sp)))
+ return; /* Leakage unless caller handles error. */
free_percpu(sp->per_cpu_ref);
sp->per_cpu_ref = NULL;
}
@@ -302,9 +298,8 @@
{
int idx;
+ idx = ACCESS_ONCE(sp->completed) & 0x1;
preempt_disable();
- idx = rcu_dereference_index_check(sp->completed,
- rcu_read_lock_sched_held()) & 0x1;
ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->c[idx]) += 1;
smp_mb(); /* B */ /* Avoid leaking the critical section. */
ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->seq[idx]) += 1;
@@ -321,10 +316,8 @@
*/
void __srcu_read_unlock(struct srcu_struct *sp, int idx)
{
- preempt_disable();
smp_mb(); /* C */ /* Avoid leaking the critical section. */
- ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->c[idx]) -= 1;
- preempt_enable();
+ this_cpu_dec(sp->per_cpu_ref->c[idx]);
}
EXPORT_SYMBOL_GPL(__srcu_read_unlock);
@@ -423,6 +416,7 @@
!lock_is_held(&rcu_sched_lock_map),
"Illegal synchronize_srcu() in same-type SRCU (or RCU) read-side critical section");
+ might_sleep();
init_completion(&rcu.completion);
head->next = NULL;
@@ -455,10 +449,12 @@
* synchronize_srcu - wait for prior SRCU read-side critical-section completion
* @sp: srcu_struct with which to synchronize.
*
- * Flip the completed counter, and wait for the old count to drain to zero.
- * As with classic RCU, the updater must use some separate means of
- * synchronizing concurrent updates. Can block; must be called from
- * process context.
+ * Wait for the count to drain to zero of both indexes. To avoid the
+ * possible starvation of synchronize_srcu(), it waits for the count of
+ * the index=((->completed & 1) ^ 1) to drain to zero at first,
+ * and then flip the completed and wait for the count of the other index.
+ *
+ * Can block; must be called from process context.
*
* Note that it is illegal to call synchronize_srcu() from the corresponding
* SRCU read-side critical section; doing so will result in deadlock.
@@ -480,12 +476,11 @@
* Wait for an SRCU grace period to elapse, but be more aggressive about
* spinning rather than blocking when waiting.
*
- * Note that it is illegal to call this function while holding any lock
- * that is acquired by a CPU-hotplug notifier. It is also illegal to call
- * synchronize_srcu_expedited() from the corresponding SRCU read-side
- * critical section; doing so will result in deadlock. However, it is
- * perfectly legal to call synchronize_srcu_expedited() on one srcu_struct
- * from some other srcu_struct's read-side critical section, as long as
+ * Note that it is also illegal to call synchronize_srcu_expedited()
+ * from the corresponding SRCU read-side critical section;
+ * doing so will result in deadlock. However, it is perfectly legal
+ * to call synchronize_srcu_expedited() on one srcu_struct from some
+ * other srcu_struct's read-side critical section, as long as
* the resulting graph of srcu_structs is acyclic.
*/
void synchronize_srcu_expedited(struct srcu_struct *sp)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 2f194e9..95d178c 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -18,7 +18,7 @@
#include <linux/stop_machine.h>
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
-
+#include <linux/smpboot.h>
#include <linux/atomic.h>
/*
@@ -37,10 +37,10 @@
spinlock_t lock;
bool enabled; /* is this stopper enabled? */
struct list_head works; /* list of pending works */
- struct task_struct *thread; /* stopper thread */
};
static DEFINE_PER_CPU(struct cpu_stopper, cpu_stopper);
+static DEFINE_PER_CPU(struct task_struct *, cpu_stopper_task);
static bool stop_machine_initialized = false;
static void cpu_stop_init_done(struct cpu_stop_done *done, unsigned int nr_todo)
@@ -62,16 +62,18 @@
}
/* queue @work to @stopper. if offline, @work is completed immediately */
-static void cpu_stop_queue_work(struct cpu_stopper *stopper,
- struct cpu_stop_work *work)
+static void cpu_stop_queue_work(unsigned int cpu, struct cpu_stop_work *work)
{
+ struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
+ struct task_struct *p = per_cpu(cpu_stopper_task, cpu);
+
unsigned long flags;
spin_lock_irqsave(&stopper->lock, flags);
if (stopper->enabled) {
list_add_tail(&work->list, &stopper->works);
- wake_up_process(stopper->thread);
+ wake_up_process(p);
} else
cpu_stop_signal_done(work->done, false);
@@ -108,7 +110,7 @@
struct cpu_stop_work work = { .fn = fn, .arg = arg, .done = &done };
cpu_stop_init_done(&done, 1);
- cpu_stop_queue_work(&per_cpu(cpu_stopper, cpu), &work);
+ cpu_stop_queue_work(cpu, &work);
wait_for_completion(&done.completion);
return done.executed ? done.ret : -ENOENT;
}
@@ -130,7 +132,7 @@
struct cpu_stop_work *work_buf)
{
*work_buf = (struct cpu_stop_work){ .fn = fn, .arg = arg, };
- cpu_stop_queue_work(&per_cpu(cpu_stopper, cpu), work_buf);
+ cpu_stop_queue_work(cpu, work_buf);
}
/* static data for stop_cpus */
@@ -159,8 +161,7 @@
*/
preempt_disable();
for_each_cpu(cpu, cpumask)
- cpu_stop_queue_work(&per_cpu(cpu_stopper, cpu),
- &per_cpu(stop_cpus_work, cpu));
+ cpu_stop_queue_work(cpu, &per_cpu(stop_cpus_work, cpu));
preempt_enable();
}
@@ -244,20 +245,25 @@
return ret;
}
-static int cpu_stopper_thread(void *data)
+static int cpu_stop_should_run(unsigned int cpu)
{
- struct cpu_stopper *stopper = data;
+ struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
+ unsigned long flags;
+ int run;
+
+ spin_lock_irqsave(&stopper->lock, flags);
+ run = !list_empty(&stopper->works);
+ spin_unlock_irqrestore(&stopper->lock, flags);
+ return run;
+}
+
+static void cpu_stopper_thread(unsigned int cpu)
+{
+ struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
struct cpu_stop_work *work;
int ret;
repeat:
- set_current_state(TASK_INTERRUPTIBLE); /* mb paired w/ kthread_stop */
-
- if (kthread_should_stop()) {
- __set_current_state(TASK_RUNNING);
- return 0;
- }
-
work = NULL;
spin_lock_irq(&stopper->lock);
if (!list_empty(&stopper->works)) {
@@ -273,8 +279,6 @@
struct cpu_stop_done *done = work->done;
char ksym_buf[KSYM_NAME_LEN] __maybe_unused;
- __set_current_state(TASK_RUNNING);
-
/* cpu stop callbacks are not allowed to sleep */
preempt_disable();
@@ -290,88 +294,55 @@
ksym_buf), arg);
cpu_stop_signal_done(done, true);
- } else
- schedule();
-
- goto repeat;
+ goto repeat;
+ }
}
extern void sched_set_stop_task(int cpu, struct task_struct *stop);
-/* manage stopper for a cpu, mostly lifted from sched migration thread mgmt */
-static int __cpuinit cpu_stop_cpu_callback(struct notifier_block *nfb,
- unsigned long action, void *hcpu)
+static void cpu_stop_create(unsigned int cpu)
{
- unsigned int cpu = (unsigned long)hcpu;
- struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
- struct task_struct *p;
-
- switch (action & ~CPU_TASKS_FROZEN) {
- case CPU_UP_PREPARE:
- BUG_ON(stopper->thread || stopper->enabled ||
- !list_empty(&stopper->works));
- p = kthread_create_on_node(cpu_stopper_thread,
- stopper,
- cpu_to_node(cpu),
- "migration/%d", cpu);
- if (IS_ERR(p))
- return notifier_from_errno(PTR_ERR(p));
- get_task_struct(p);
- kthread_bind(p, cpu);
- sched_set_stop_task(cpu, p);
- stopper->thread = p;
- break;
-
- case CPU_ONLINE:
- /* strictly unnecessary, as first user will wake it */
- wake_up_process(stopper->thread);
- /* mark enabled */
- spin_lock_irq(&stopper->lock);
- stopper->enabled = true;
- spin_unlock_irq(&stopper->lock);
- break;
-
-#ifdef CONFIG_HOTPLUG_CPU
- case CPU_UP_CANCELED:
- case CPU_POST_DEAD:
- {
- struct cpu_stop_work *work;
-
- sched_set_stop_task(cpu, NULL);
- /* kill the stopper */
- kthread_stop(stopper->thread);
- /* drain remaining works */
- spin_lock_irq(&stopper->lock);
- list_for_each_entry(work, &stopper->works, list)
- cpu_stop_signal_done(work->done, false);
- stopper->enabled = false;
- spin_unlock_irq(&stopper->lock);
- /* release the stopper */
- put_task_struct(stopper->thread);
- stopper->thread = NULL;
- break;
- }
-#endif
- }
-
- return NOTIFY_OK;
+ sched_set_stop_task(cpu, per_cpu(cpu_stopper_task, cpu));
}
-/*
- * Give it a higher priority so that cpu stopper is available to other
- * cpu notifiers. It currently shares the same priority as sched
- * migration_notifier.
- */
-static struct notifier_block __cpuinitdata cpu_stop_cpu_notifier = {
- .notifier_call = cpu_stop_cpu_callback,
- .priority = 10,
+static void cpu_stop_park(unsigned int cpu)
+{
+ struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
+ struct cpu_stop_work *work;
+ unsigned long flags;
+
+ /* drain remaining works */
+ spin_lock_irqsave(&stopper->lock, flags);
+ list_for_each_entry(work, &stopper->works, list)
+ cpu_stop_signal_done(work->done, false);
+ stopper->enabled = false;
+ spin_unlock_irqrestore(&stopper->lock, flags);
+}
+
+static void cpu_stop_unpark(unsigned int cpu)
+{
+ struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
+
+ spin_lock_irq(&stopper->lock);
+ stopper->enabled = true;
+ spin_unlock_irq(&stopper->lock);
+}
+
+static struct smp_hotplug_thread cpu_stop_threads = {
+ .store = &cpu_stopper_task,
+ .thread_should_run = cpu_stop_should_run,
+ .thread_fn = cpu_stopper_thread,
+ .thread_comm = "migration/%u",
+ .create = cpu_stop_create,
+ .setup = cpu_stop_unpark,
+ .park = cpu_stop_park,
+ .unpark = cpu_stop_unpark,
+ .selfparking = true,
};
static int __init cpu_stop_init(void)
{
- void *bcpu = (void *)(long)smp_processor_id();
unsigned int cpu;
- int err;
for_each_possible_cpu(cpu) {
struct cpu_stopper *stopper = &per_cpu(cpu_stopper, cpu);
@@ -380,15 +351,8 @@
INIT_LIST_HEAD(&stopper->works);
}
- /* start one for the boot cpu */
- err = cpu_stop_cpu_callback(&cpu_stop_cpu_notifier, CPU_UP_PREPARE,
- bcpu);
- BUG_ON(err != NOTIFY_OK);
- cpu_stop_cpu_callback(&cpu_stop_cpu_notifier, CPU_ONLINE, bcpu);
- register_cpu_notifier(&cpu_stop_cpu_notifier);
-
+ BUG_ON(smpboot_register_percpu_thread(&cpu_stop_threads));
stop_machine_initialized = true;
-
return 0;
}
early_initcall(cpu_stop_init);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index c88878d..4fc9be9 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -61,6 +61,7 @@
#include <linux/kmod.h>
#include <linux/capability.h>
#include <linux/binfmts.h>
+#include <linux/sched/sysctl.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
@@ -403,6 +404,13 @@
.mode = 0644,
.proc_handler = sched_rt_handler,
},
+ {
+ .procname = "sched_rr_timeslice_ms",
+ .data = &sched_rr_timeslice,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = sched_rr_handler,
+ },
#ifdef CONFIG_SCHED_AUTOGROUP
{
.procname = "sched_autogroup_enabled",
diff --git a/kernel/time.c b/kernel/time.c
index d226c6a..c2a27dd 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -115,6 +115,12 @@
}
/*
+ * Indicates if there is an offset between the system clock and the hardware
+ * clock/persistent clock/rtc.
+ */
+int persistent_clock_is_local;
+
+/*
* Adjust the time obtained from the CMOS to be UTC time instead of
* local time.
*
@@ -135,6 +141,8 @@
struct timespec adjust;
adjust = current_kernel_time();
+ if (sys_tz.tz_minuteswest != 0)
+ persistent_clock_is_local = 1;
adjust.tv_sec += sys_tz.tz_minuteswest * 60;
do_settimeofday(&adjust);
}
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 8601f0d..24510d8 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -12,6 +12,11 @@
config ARCH_CLOCKSOURCE_DATA
bool
+# Platforms has a persistent clock
+config ALWAYS_USE_PERSISTENT_CLOCK
+ bool
+ default n
+
# Timekeeping vsyscall support
config GENERIC_TIME_VSYSCALL
bool
@@ -38,6 +43,10 @@
default y
depends on GENERIC_CLOCKEVENTS
+# Architecture can handle broadcast in a driver-agnostic way
+config ARCH_HAS_TICK_BROADCAST
+ bool
+
# Clockevents broadcasting infrastructure
config GENERIC_CLOCKEVENTS_BROADCAST
bool
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 24174b4..b10a42b 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -15,6 +15,7 @@
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/rtc.h>
#include "tick-internal.h"
@@ -483,8 +484,7 @@
return leap;
}
-#ifdef CONFIG_GENERIC_CMOS_UPDATE
-
+#if defined(CONFIG_GENERIC_CMOS_UPDATE) || defined(CONFIG_RTC_SYSTOHC)
static void sync_cmos_clock(struct work_struct *work);
static DECLARE_DELAYED_WORK(sync_cmos_work, sync_cmos_clock);
@@ -510,14 +510,26 @@
}
getnstimeofday(&now);
- if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
- fail = update_persistent_clock(now);
+ if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2) {
+ struct timespec adjust = now;
+
+ fail = -ENODEV;
+ if (persistent_clock_is_local)
+ adjust.tv_sec -= (sys_tz.tz_minuteswest * 60);
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
+ fail = update_persistent_clock(adjust);
+#endif
+#ifdef CONFIG_RTC_SYSTOHC
+ if (fail == -ENODEV)
+ fail = rtc_set_ntp_time(adjust);
+#endif
+ }
next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
if (next.tv_nsec <= 0)
next.tv_nsec += NSEC_PER_SEC;
- if (!fail)
+ if (!fail || fail == -ENODEV)
next.tv_sec = 659;
else
next.tv_sec = 0;
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index f113755..2fb8cb8 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -18,6 +18,7 @@
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include "tick-internal.h"
@@ -86,6 +87,22 @@
return (dev && tick_broadcast_device.evtdev == dev);
}
+static void err_broadcast(const struct cpumask *mask)
+{
+ pr_crit_once("Failed to broadcast timer tick. Some CPUs may be unresponsive.\n");
+}
+
+static void tick_device_setup_broadcast_func(struct clock_event_device *dev)
+{
+ if (!dev->broadcast)
+ dev->broadcast = tick_broadcast;
+ if (!dev->broadcast) {
+ pr_warn_once("%s depends on broadcast, but no broadcast function available\n",
+ dev->name);
+ dev->broadcast = err_broadcast;
+ }
+}
+
/*
* Check, if the device is disfunctional and a place holder, which
* needs to be handled by the broadcast device.
@@ -105,6 +122,7 @@
*/
if (!tick_device_is_functional(dev)) {
dev->event_handler = tick_handle_periodic;
+ tick_device_setup_broadcast_func(dev);
cpumask_set_cpu(cpu, tick_get_broadcast_mask());
tick_broadcast_start_periodic(tick_broadcast_device.evtdev);
ret = 1;
@@ -116,15 +134,33 @@
*/
if (!(dev->features & CLOCK_EVT_FEAT_C3STOP)) {
int cpu = smp_processor_id();
-
cpumask_clear_cpu(cpu, tick_get_broadcast_mask());
tick_broadcast_clear_oneshot(cpu);
+ } else {
+ tick_device_setup_broadcast_func(dev);
}
}
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
return ret;
}
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+int tick_receive_broadcast(void)
+{
+ struct tick_device *td = this_cpu_ptr(&tick_cpu_device);
+ struct clock_event_device *evt = td->evtdev;
+
+ if (!evt)
+ return -ENODEV;
+
+ if (!evt->event_handler)
+ return -EINVAL;
+
+ evt->event_handler(evt);
+ return 0;
+}
+#endif
+
/*
* Broadcast the event to the cpus, which are set in the mask (mangled).
*/
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index d58e552..314b9ee 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -20,6 +20,7 @@
#include <linux/profile.h>
#include <linux/sched.h>
#include <linux/module.h>
+#include <linux/irq_work.h>
#include <asm/irq_regs.h>
@@ -28,7 +29,7 @@
/*
* Per cpu nohz control structure
*/
-static DEFINE_PER_CPU(struct tick_sched, tick_cpu_sched);
+DEFINE_PER_CPU(struct tick_sched, tick_cpu_sched);
/*
* The time, when the last jiffy update happened. Protected by jiffies_lock.
@@ -331,8 +332,8 @@
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&jiffies_lock, seq));
- if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) ||
- arch_needs_cpu(cpu)) {
+ if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) ||
+ arch_needs_cpu(cpu) || irq_work_needs_cpu()) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
} else {
@@ -631,8 +632,11 @@
static void tick_nohz_account_idle_ticks(struct tick_sched *ts)
{
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
unsigned long ticks;
+
+ if (vtime_accounting_enabled())
+ return;
/*
* We stopped the tick in idle. Update process times would miss the
* time we slept as update_process_times does only a 1 tick
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index cbc6acb..1e35515 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -29,6 +29,9 @@
/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;
+/* Flag for if there is a persistent clock on this platform */
+bool __read_mostly persistent_clock_exist = false;
+
static inline void tk_normalize_xtime(struct timekeeper *tk)
{
while (tk->xtime_nsec >= ((u64)NSEC_PER_SEC << tk->shift)) {
@@ -264,19 +267,18 @@
}
/**
- * getnstimeofday - Returns the time of day in a timespec
+ * __getnstimeofday - Returns the time of day in a timespec.
* @ts: pointer to the timespec to be set
*
- * Returns the time of day in a timespec.
+ * Updates the time of day in the timespec.
+ * Returns 0 on success, or -ve when suspended (timespec will be undefined).
*/
-void getnstimeofday(struct timespec *ts)
+int __getnstimeofday(struct timespec *ts)
{
struct timekeeper *tk = &timekeeper;
unsigned long seq;
s64 nsecs = 0;
- WARN_ON(timekeeping_suspended);
-
do {
seq = read_seqbegin(&tk->lock);
@@ -287,6 +289,26 @@
ts->tv_nsec = 0;
timespec_add_ns(ts, nsecs);
+
+ /*
+ * Do not bail out early, in case there were callers still using
+ * the value, even in the face of the WARN_ON.
+ */
+ if (unlikely(timekeeping_suspended))
+ return -EAGAIN;
+ return 0;
+}
+EXPORT_SYMBOL(__getnstimeofday);
+
+/**
+ * getnstimeofday - Returns the time of day in a timespec.
+ * @ts: pointer to the timespec to be set
+ *
+ * Returns the time of day in a timespec (WARN if suspended).
+ */
+void getnstimeofday(struct timespec *ts)
+{
+ WARN_ON(__getnstimeofday(ts));
}
EXPORT_SYMBOL(getnstimeofday);
@@ -640,12 +662,14 @@
struct timespec now, boot, tmp;
read_persistent_clock(&now);
+
if (!timespec_valid_strict(&now)) {
pr_warn("WARNING: Persistent clock returned invalid value!\n"
" Check your CMOS/BIOS settings.\n");
now.tv_sec = 0;
now.tv_nsec = 0;
- }
+ } else if (now.tv_sec || now.tv_nsec)
+ persistent_clock_exist = true;
read_boot_clock(&boot);
if (!timespec_valid_strict(&boot)) {
@@ -718,11 +742,12 @@
{
struct timekeeper *tk = &timekeeper;
unsigned long flags;
- struct timespec ts;
- /* Make sure we don't set the clock twice */
- read_persistent_clock(&ts);
- if (!(ts.tv_sec == 0 && ts.tv_nsec == 0))
+ /*
+ * Make sure we don't set the clock twice, as timekeeping_resume()
+ * already did it
+ */
+ if (has_persistent_clock())
return;
write_seqlock_irqsave(&tk->lock, flags);
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
index eb51d76..3f42652 100644
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -369,10 +369,8 @@
die "Usage: $0 HZ\n";
}
- @val = @{$canned_values{$hz}};
- if (!defined(@val)) {
- @val = compute_values($hz);
- }
+ $cv = $canned_values{$hz};
+ @val = defined($cv) ? @$cv : compute_values($hz);
output($hz, @val);
}
exit 0;
diff --git a/kernel/timer.c b/kernel/timer.c
index 367d008..dbf7a78 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -39,6 +39,7 @@
#include <linux/kallsyms.h>
#include <linux/irq_work.h>
#include <linux/sched.h>
+#include <linux/sched/sysctl.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
@@ -1351,7 +1352,6 @@
account_process_tick(p, user_tick);
run_local_timers();
rcu_check_callbacks(cpu, user_tick);
- printk_tick();
#ifdef CONFIG_IRQ_WORK
if (in_irq())
irq_work_run();
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 5d89335..192473b 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -39,6 +39,9 @@
help
See Documentation/trace/ftrace-design.txt
+config HAVE_DYNAMIC_FTRACE_WITH_REGS
+ bool
+
config HAVE_FTRACE_MCOUNT_RECORD
bool
help
@@ -78,21 +81,6 @@
select CONTEXT_SWITCH_TRACER
bool
-config EVENT_POWER_TRACING_DEPRECATED
- depends on EVENT_TRACING
- bool "Deprecated power event trace API, to be removed"
- default y
- help
- Provides old power event types:
- C-state/idle accounting events:
- power:power_start
- power:power_end
- and old cpufreq accounting event:
- power:power_frequency
- This is for userspace compatibility
- and will vanish after 5 kernel iterations,
- namely 3.1.
-
config CONTEXT_SWITCH_TRACER
bool
@@ -250,6 +238,16 @@
help
Basic tracer to catch the syscall entry and exit events.
+config TRACER_SNAPSHOT
+ bool "Create a snapshot trace buffer"
+ select TRACER_MAX_TRACE
+ help
+ Allow tracing users to take snapshot of the current buffer using the
+ ftrace interface, e.g.:
+
+ echo 1 > /sys/kernel/debug/tracing/snapshot
+ cat snapshot
+
config TRACE_BRANCH_PROFILING
bool
select GENERIC_TRACER
@@ -434,6 +432,11 @@
were made. If so, it runs stop_machine (stops all CPUS)
and modifies the code to jump over the call to ftrace.
+config DYNAMIC_FTRACE_WITH_REGS
+ def_bool y
+ depends on DYNAMIC_FTRACE
+ depends on HAVE_DYNAMIC_FTRACE_WITH_REGS
+
config FUNCTION_PROFILER
bool "Kernel function profiler"
depends on FUNCTION_TRACER
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index c0bd030..71259e2 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -147,7 +147,7 @@
return;
local_irq_save(flags);
- buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
+ buf = this_cpu_ptr(bt->msg_data);
va_start(args, fmt);
n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
va_end(args);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 41473b4..ce8c3d6 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -111,6 +111,26 @@
#define ftrace_ops_list_func ((ftrace_func_t)ftrace_ops_no_ops)
#endif
+/*
+ * Traverse the ftrace_global_list, invoking all entries. The reason that we
+ * can use rcu_dereference_raw() is that elements removed from this list
+ * are simply leaked, so there is no need to interact with a grace-period
+ * mechanism. The rcu_dereference_raw() calls are needed to handle
+ * concurrent insertions into the ftrace_global_list.
+ *
+ * Silly Alpha and silly pointer-speculation compiler optimizations!
+ */
+#define do_for_each_ftrace_op(op, list) \
+ op = rcu_dereference_raw(list); \
+ do
+
+/*
+ * Optimized for just a single item in the list (as that is the normal case).
+ */
+#define while_for_each_ftrace_op(op) \
+ while (likely(op = rcu_dereference_raw((op)->next)) && \
+ unlikely((op) != &ftrace_list_end))
+
/**
* ftrace_nr_registered_ops - return number of ops registered
*
@@ -132,29 +152,21 @@
return cnt;
}
-/*
- * Traverse the ftrace_global_list, invoking all entries. The reason that we
- * can use rcu_dereference_raw() is that elements removed from this list
- * are simply leaked, so there is no need to interact with a grace-period
- * mechanism. The rcu_dereference_raw() calls are needed to handle
- * concurrent insertions into the ftrace_global_list.
- *
- * Silly Alpha and silly pointer-speculation compiler optimizations!
- */
static void
ftrace_global_list_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *regs)
{
- if (unlikely(trace_recursion_test(TRACE_GLOBAL_BIT)))
+ int bit;
+
+ bit = trace_test_and_set_recursion(TRACE_GLOBAL_START, TRACE_GLOBAL_MAX);
+ if (bit < 0)
return;
- trace_recursion_set(TRACE_GLOBAL_BIT);
- op = rcu_dereference_raw(ftrace_global_list); /*see above*/
- while (op != &ftrace_list_end) {
+ do_for_each_ftrace_op(op, ftrace_global_list) {
op->func(ip, parent_ip, op, regs);
- op = rcu_dereference_raw(op->next); /*see above*/
- };
- trace_recursion_clear(TRACE_GLOBAL_BIT);
+ } while_for_each_ftrace_op(op);
+
+ trace_clear_recursion(bit);
}
static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip,
@@ -221,10 +233,24 @@
* registered callers.
*/
if (ftrace_global_list == &ftrace_list_end ||
- ftrace_global_list->next == &ftrace_list_end)
+ ftrace_global_list->next == &ftrace_list_end) {
func = ftrace_global_list->func;
- else
+ /*
+ * As we are calling the function directly.
+ * If it does not have recursion protection,
+ * the function_trace_op needs to be updated
+ * accordingly.
+ */
+ if (ftrace_global_list->flags & FTRACE_OPS_FL_RECURSION_SAFE)
+ global_ops.flags |= FTRACE_OPS_FL_RECURSION_SAFE;
+ else
+ global_ops.flags &= ~FTRACE_OPS_FL_RECURSION_SAFE;
+ } else {
func = ftrace_global_list_func;
+ /* The list has its own recursion protection. */
+ global_ops.flags |= FTRACE_OPS_FL_RECURSION_SAFE;
+ }
+
/* If we filter on pids, update to use the pid function */
if (!list_empty(&ftrace_pids)) {
@@ -337,7 +363,7 @@
if ((ops->flags & FL_GLOBAL_CONTROL_MASK) == FL_GLOBAL_CONTROL_MASK)
return -EINVAL;
-#ifndef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
/*
* If the ftrace_ops specifies SAVE_REGS, then it only can be used
* if the arch supports it, or SAVE_REGS_IF_SUPPORTED is also set.
@@ -4090,14 +4116,11 @@
*/
preempt_disable_notrace();
trace_recursion_set(TRACE_CONTROL_BIT);
- op = rcu_dereference_raw(ftrace_control_list);
- while (op != &ftrace_list_end) {
+ do_for_each_ftrace_op(op, ftrace_control_list) {
if (!ftrace_function_local_disabled(op) &&
ftrace_ops_test(op, ip))
op->func(ip, parent_ip, op, regs);
-
- op = rcu_dereference_raw(op->next);
- };
+ } while_for_each_ftrace_op(op);
trace_recursion_clear(TRACE_CONTROL_BIT);
preempt_enable_notrace();
}
@@ -4112,27 +4135,26 @@
struct ftrace_ops *ignored, struct pt_regs *regs)
{
struct ftrace_ops *op;
+ int bit;
if (function_trace_stop)
return;
- if (unlikely(trace_recursion_test(TRACE_INTERNAL_BIT)))
+ bit = trace_test_and_set_recursion(TRACE_LIST_START, TRACE_LIST_MAX);
+ if (bit < 0)
return;
- trace_recursion_set(TRACE_INTERNAL_BIT);
/*
* Some of the ops may be dynamically allocated,
* they must be freed after a synchronize_sched().
*/
preempt_disable_notrace();
- op = rcu_dereference_raw(ftrace_ops_list);
- while (op != &ftrace_list_end) {
+ do_for_each_ftrace_op(op, ftrace_ops_list) {
if (ftrace_ops_test(op, ip))
op->func(ip, parent_ip, op, regs);
- op = rcu_dereference_raw(op->next);
- };
+ } while_for_each_ftrace_op(op);
preempt_enable_notrace();
- trace_recursion_clear(TRACE_INTERNAL_BIT);
+ trace_clear_recursion(bit);
}
/*
@@ -4143,8 +4165,8 @@
* Archs are to support both the regs and ftrace_ops at the same time.
* If they support ftrace_ops, it is assumed they support regs.
* If call backs want to use regs, they must either check for regs
- * being NULL, or ARCH_SUPPORTS_FTRACE_SAVE_REGS.
- * Note, ARCH_SUPPORT_SAVE_REGS expects a full regs to be saved.
+ * being NULL, or CONFIG_DYNAMIC_FTRACE_WITH_REGS.
+ * Note, CONFIG_DYNAMIC_FTRACE_WITH_REGS expects a full regs to be saved.
* An architecture can pass partial regs with ftrace_ops and still
* set the ARCH_SUPPORT_FTARCE_OPS.
*/
diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c
index f55fcf6..1c71382 100644
--- a/kernel/trace/power-traces.c
+++ b/kernel/trace/power-traces.c
@@ -13,8 +13,5 @@
#define CREATE_TRACE_POINTS
#include <trace/events/power.h>
-#ifdef EVENT_POWER_TRACING_DEPRECATED
-EXPORT_TRACEPOINT_SYMBOL_GPL(power_start);
-#endif
EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index ce8514fe..7244acd 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3,8 +3,10 @@
*
* Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com>
*/
+#include <linux/ftrace_event.h>
#include <linux/ring_buffer.h>
#include <linux/trace_clock.h>
+#include <linux/trace_seq.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
@@ -21,7 +23,6 @@
#include <linux/fs.h>
#include <asm/local.h>
-#include "trace.h"
static void update_pages_handler(struct work_struct *work);
@@ -2432,41 +2433,76 @@
#ifdef CONFIG_TRACING
-#define TRACE_RECURSIVE_DEPTH 16
+/*
+ * The lock and unlock are done within a preempt disable section.
+ * The current_context per_cpu variable can only be modified
+ * by the current task between lock and unlock. But it can
+ * be modified more than once via an interrupt. To pass this
+ * information from the lock to the unlock without having to
+ * access the 'in_interrupt()' functions again (which do show
+ * a bit of overhead in something as critical as function tracing,
+ * we use a bitmask trick.
+ *
+ * bit 0 = NMI context
+ * bit 1 = IRQ context
+ * bit 2 = SoftIRQ context
+ * bit 3 = normal context.
+ *
+ * This works because this is the order of contexts that can
+ * preempt other contexts. A SoftIRQ never preempts an IRQ
+ * context.
+ *
+ * When the context is determined, the corresponding bit is
+ * checked and set (if it was set, then a recursion of that context
+ * happened).
+ *
+ * On unlock, we need to clear this bit. To do so, just subtract
+ * 1 from the current_context and AND it to itself.
+ *
+ * (binary)
+ * 101 - 1 = 100
+ * 101 & 100 = 100 (clearing bit zero)
+ *
+ * 1010 - 1 = 1001
+ * 1010 & 1001 = 1000 (clearing bit 1)
+ *
+ * The least significant bit can be cleared this way, and it
+ * just so happens that it is the same bit corresponding to
+ * the current context.
+ */
+static DEFINE_PER_CPU(unsigned int, current_context);
-/* Keep this code out of the fast path cache */
-static noinline void trace_recursive_fail(void)
+static __always_inline int trace_recursive_lock(void)
{
- /* Disable all tracing before we do anything else */
- tracing_off_permanent();
+ unsigned int val = this_cpu_read(current_context);
+ int bit;
- printk_once(KERN_WARNING "Tracing recursion: depth[%ld]:"
- "HC[%lu]:SC[%lu]:NMI[%lu]\n",
- trace_recursion_buffer(),
- hardirq_count() >> HARDIRQ_SHIFT,
- softirq_count() >> SOFTIRQ_SHIFT,
- in_nmi());
+ if (in_interrupt()) {
+ if (in_nmi())
+ bit = 0;
+ else if (in_irq())
+ bit = 1;
+ else
+ bit = 2;
+ } else
+ bit = 3;
- WARN_ON_ONCE(1);
+ if (unlikely(val & (1 << bit)))
+ return 1;
+
+ val |= (1 << bit);
+ this_cpu_write(current_context, val);
+
+ return 0;
}
-static inline int trace_recursive_lock(void)
+static __always_inline void trace_recursive_unlock(void)
{
- trace_recursion_inc();
+ unsigned int val = this_cpu_read(current_context);
- if (likely(trace_recursion_buffer() < TRACE_RECURSIVE_DEPTH))
- return 0;
-
- trace_recursive_fail();
-
- return -1;
-}
-
-static inline void trace_recursive_unlock(void)
-{
- WARN_ON_ONCE(!trace_recursion_buffer());
-
- trace_recursion_dec();
+ val--;
+ val &= this_cpu_read(current_context);
+ this_cpu_write(current_context, val);
}
#else
@@ -3067,6 +3103,24 @@
EXPORT_SYMBOL_GPL(ring_buffer_dropped_events_cpu);
/**
+ * ring_buffer_read_events_cpu - get the number of events successfully read
+ * @buffer: The ring buffer
+ * @cpu: The per CPU buffer to get the number of events read
+ */
+unsigned long
+ring_buffer_read_events_cpu(struct ring_buffer *buffer, int cpu)
+{
+ struct ring_buffer_per_cpu *cpu_buffer;
+
+ if (!cpumask_test_cpu(cpu, buffer->cpumask))
+ return 0;
+
+ cpu_buffer = buffer->buffers[cpu];
+ return cpu_buffer->read;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_read_events_cpu);
+
+/**
* ring_buffer_entries - get the number of entries in a buffer
* @buffer: The ring buffer
*
@@ -3425,7 +3479,7 @@
/* check for end of page padding */
if ((iter->head >= rb_page_size(iter->head_page)) &&
(iter->head_page != cpu_buffer->commit_page))
- rb_advance_iter(iter);
+ rb_inc_iter(iter);
}
static int rb_lost_events(struct ring_buffer_per_cpu *cpu_buffer)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 3c13e46..c2e2c23 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -39,6 +39,7 @@
#include <linux/poll.h>
#include <linux/nmi.h>
#include <linux/fs.h>
+#include <linux/sched/rt.h>
#include "trace.h"
#include "trace_output.h"
@@ -249,7 +250,7 @@
static struct tracer *trace_types __read_mostly;
/* current_trace points to the tracer that is currently active */
-static struct tracer *current_trace __read_mostly;
+static struct tracer *current_trace __read_mostly = &nop_trace;
/*
* trace_types_lock is used to protect the trace_types list.
@@ -709,10 +710,13 @@
return;
WARN_ON_ONCE(!irqs_disabled());
- if (!current_trace->use_max_tr) {
- WARN_ON_ONCE(1);
+
+ if (!current_trace->allocated_snapshot) {
+ /* Only the nop tracer should hit this when disabling */
+ WARN_ON_ONCE(current_trace != &nop_trace);
return;
}
+
arch_spin_lock(&ftrace_max_lock);
tr->buffer = max_tr.buffer;
@@ -739,10 +743,8 @@
return;
WARN_ON_ONCE(!irqs_disabled());
- if (!current_trace->use_max_tr) {
- WARN_ON_ONCE(1);
+ if (WARN_ON_ONCE(!current_trace->allocated_snapshot))
return;
- }
arch_spin_lock(&ftrace_max_lock);
@@ -862,10 +864,13 @@
current_trace = type;
- /* If we expanded the buffers, make sure the max is expanded too */
- if (ring_buffer_expanded && type->use_max_tr)
- ring_buffer_resize(max_tr.buffer, trace_buf_size,
- RING_BUFFER_ALL_CPUS);
+ if (type->use_max_tr) {
+ /* If we expanded the buffers, make sure the max is expanded too */
+ if (ring_buffer_expanded)
+ ring_buffer_resize(max_tr.buffer, trace_buf_size,
+ RING_BUFFER_ALL_CPUS);
+ type->allocated_snapshot = true;
+ }
/* the test is responsible for initializing and enabling */
pr_info("Testing tracer %s: ", type->name);
@@ -881,10 +886,14 @@
/* Only reset on passing, to avoid touching corrupted buffers */
tracing_reset_online_cpus(tr);
- /* Shrink the max buffer again */
- if (ring_buffer_expanded && type->use_max_tr)
- ring_buffer_resize(max_tr.buffer, 1,
- RING_BUFFER_ALL_CPUS);
+ if (type->use_max_tr) {
+ type->allocated_snapshot = false;
+
+ /* Shrink the max buffer again */
+ if (ring_buffer_expanded)
+ ring_buffer_resize(max_tr.buffer, 1,
+ RING_BUFFER_ALL_CPUS);
+ }
printk(KERN_CONT "PASSED\n");
}
@@ -922,6 +931,9 @@
{
struct ring_buffer *buffer = tr->buffer;
+ if (!buffer)
+ return;
+
ring_buffer_record_disable(buffer);
/* Make sure all commits have finished */
@@ -936,6 +948,9 @@
struct ring_buffer *buffer = tr->buffer;
int cpu;
+ if (!buffer)
+ return;
+
ring_buffer_record_disable(buffer);
/* Make sure all commits have finished */
@@ -1167,7 +1182,6 @@
entry->preempt_count = pc & 0xff;
entry->pid = (tsk) ? tsk->pid : 0;
- entry->padding = 0;
entry->flags =
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
(irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) |
@@ -1335,7 +1349,7 @@
*/
preempt_disable_notrace();
- use_stack = ++__get_cpu_var(ftrace_stack_reserve);
+ use_stack = __this_cpu_inc_return(ftrace_stack_reserve);
/*
* We don't need any atomic variables, just a barrier.
* If an interrupt comes in, we don't care, because it would
@@ -1389,7 +1403,7 @@
out:
/* Again, don't let gcc optimize things here */
barrier();
- __get_cpu_var(ftrace_stack_reserve)--;
+ __this_cpu_dec(ftrace_stack_reserve);
preempt_enable_notrace();
}
@@ -1517,7 +1531,6 @@
static char *get_trace_buf(void)
{
struct trace_buffer_struct *percpu_buffer;
- struct trace_buffer_struct *buffer;
/*
* If we have allocated per cpu buffers, then we do not
@@ -1535,9 +1548,7 @@
if (!percpu_buffer)
return NULL;
- buffer = per_cpu_ptr(percpu_buffer, smp_processor_id());
-
- return buffer->buffer;
+ return this_cpu_ptr(&percpu_buffer->buffer[0]);
}
static int alloc_percpu_trace_buffer(void)
@@ -1942,21 +1953,27 @@
static void *s_start(struct seq_file *m, loff_t *pos)
{
struct trace_iterator *iter = m->private;
- static struct tracer *old_tracer;
int cpu_file = iter->cpu_file;
void *p = NULL;
loff_t l = 0;
int cpu;
- /* copy the tracer to avoid using a global lock all around */
+ /*
+ * copy the tracer to avoid using a global lock all around.
+ * iter->trace is a copy of current_trace, the pointer to the
+ * name may be used instead of a strcmp(), as iter->trace->name
+ * will point to the same string as current_trace->name.
+ */
mutex_lock(&trace_types_lock);
- if (unlikely(old_tracer != current_trace && current_trace)) {
- old_tracer = current_trace;
+ if (unlikely(current_trace && iter->trace->name != current_trace->name))
*iter->trace = *current_trace;
- }
mutex_unlock(&trace_types_lock);
- atomic_inc(&trace_record_cmdline_disabled);
+ if (iter->snapshot && iter->trace->use_max_tr)
+ return ERR_PTR(-EBUSY);
+
+ if (!iter->snapshot)
+ atomic_inc(&trace_record_cmdline_disabled);
if (*pos != iter->pos) {
iter->ent = NULL;
@@ -1995,7 +2012,11 @@
{
struct trace_iterator *iter = m->private;
- atomic_dec(&trace_record_cmdline_disabled);
+ if (iter->snapshot && iter->trace->use_max_tr)
+ return;
+
+ if (!iter->snapshot)
+ atomic_dec(&trace_record_cmdline_disabled);
trace_access_unlock(iter->cpu_file);
trace_event_read_unlock();
}
@@ -2080,8 +2101,7 @@
unsigned long total;
const char *name = "preemption";
- if (type)
- name = type->name;
+ name = type->name;
get_total_entries(tr, &total, &entries);
@@ -2430,7 +2450,7 @@
};
static struct trace_iterator *
-__tracing_open(struct inode *inode, struct file *file)
+__tracing_open(struct inode *inode, struct file *file, bool snapshot)
{
long cpu_file = (long) inode->i_private;
struct trace_iterator *iter;
@@ -2457,16 +2477,16 @@
if (!iter->trace)
goto fail;
- if (current_trace)
- *iter->trace = *current_trace;
+ *iter->trace = *current_trace;
if (!zalloc_cpumask_var(&iter->started, GFP_KERNEL))
goto fail;
- if (current_trace && current_trace->print_max)
+ if (current_trace->print_max || snapshot)
iter->tr = &max_tr;
else
iter->tr = &global_trace;
+ iter->snapshot = snapshot;
iter->pos = -1;
mutex_init(&iter->mutex);
iter->cpu_file = cpu_file;
@@ -2483,8 +2503,9 @@
if (trace_clocks[trace_clock_id].in_ns)
iter->iter_flags |= TRACE_FILE_TIME_IN_NS;
- /* stop the trace while dumping */
- tracing_stop();
+ /* stop the trace while dumping if we are not opening "snapshot" */
+ if (!iter->snapshot)
+ tracing_stop();
if (iter->cpu_file == TRACE_PIPE_ALL_CPU) {
for_each_tracing_cpu(cpu) {
@@ -2547,8 +2568,9 @@
if (iter->trace && iter->trace->close)
iter->trace->close(iter);
- /* reenable tracing if it was previously enabled */
- tracing_start();
+ if (!iter->snapshot)
+ /* reenable tracing if it was previously enabled */
+ tracing_start();
mutex_unlock(&trace_types_lock);
mutex_destroy(&iter->mutex);
@@ -2576,7 +2598,7 @@
}
if (file->f_mode & FMODE_READ) {
- iter = __tracing_open(inode, file);
+ iter = __tracing_open(inode, file, false);
if (IS_ERR(iter))
ret = PTR_ERR(iter);
else if (trace_flags & TRACE_ITER_LATENCY_FMT)
@@ -3014,10 +3036,7 @@
int r;
mutex_lock(&trace_types_lock);
- if (current_trace)
- r = sprintf(buf, "%s\n", current_trace->name);
- else
- r = sprintf(buf, "\n");
+ r = sprintf(buf, "%s\n", current_trace->name);
mutex_unlock(&trace_types_lock);
return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
@@ -3183,6 +3202,7 @@
static struct trace_option_dentry *topts;
struct trace_array *tr = &global_trace;
struct tracer *t;
+ bool had_max_tr;
int ret = 0;
mutex_lock(&trace_types_lock);
@@ -3207,9 +3227,21 @@
goto out;
trace_branch_disable();
- if (current_trace && current_trace->reset)
+ if (current_trace->reset)
current_trace->reset(tr);
- if (current_trace && current_trace->use_max_tr) {
+
+ had_max_tr = current_trace->allocated_snapshot;
+ current_trace = &nop_trace;
+
+ if (had_max_tr && !t->use_max_tr) {
+ /*
+ * We need to make sure that the update_max_tr sees that
+ * current_trace changed to nop_trace to keep it from
+ * swapping the buffers after we resize it.
+ * The update_max_tr is called from interrupts disabled
+ * so a synchronized_sched() is sufficient.
+ */
+ synchronize_sched();
/*
* We don't free the ring buffer. instead, resize it because
* The max_tr ring buffer has some state (e.g. ring->clock) and
@@ -3217,18 +3249,19 @@
*/
ring_buffer_resize(max_tr.buffer, 1, RING_BUFFER_ALL_CPUS);
set_buffer_entries(&max_tr, 1);
+ tracing_reset_online_cpus(&max_tr);
+ current_trace->allocated_snapshot = false;
}
destroy_trace_option_files(topts);
- current_trace = &nop_trace;
-
topts = create_trace_option_files(t);
- if (t->use_max_tr) {
+ if (t->use_max_tr && !had_max_tr) {
/* we need to make per cpu buffer sizes equivalent */
ret = resize_buffer_duplicate_size(&max_tr, &global_trace,
RING_BUFFER_ALL_CPUS);
if (ret < 0)
goto out;
+ t->allocated_snapshot = true;
}
if (t->init) {
@@ -3336,8 +3369,7 @@
ret = -ENOMEM;
goto fail;
}
- if (current_trace)
- *iter->trace = *current_trace;
+ *iter->trace = *current_trace;
if (!alloc_cpumask_var(&iter->started, GFP_KERNEL)) {
ret = -ENOMEM;
@@ -3477,7 +3509,6 @@
size_t cnt, loff_t *ppos)
{
struct trace_iterator *iter = filp->private_data;
- static struct tracer *old_tracer;
ssize_t sret;
/* return any leftover data */
@@ -3489,10 +3520,8 @@
/* copy the tracer to avoid using a global lock all around */
mutex_lock(&trace_types_lock);
- if (unlikely(old_tracer != current_trace && current_trace)) {
- old_tracer = current_trace;
+ if (unlikely(iter->trace->name != current_trace->name))
*iter->trace = *current_trace;
- }
mutex_unlock(&trace_types_lock);
/*
@@ -3648,7 +3677,6 @@
.ops = &tracing_pipe_buf_ops,
.spd_release = tracing_spd_release_pipe,
};
- static struct tracer *old_tracer;
ssize_t ret;
size_t rem;
unsigned int i;
@@ -3658,10 +3686,8 @@
/* copy the tracer to avoid using a global lock all around */
mutex_lock(&trace_types_lock);
- if (unlikely(old_tracer != current_trace && current_trace)) {
- old_tracer = current_trace;
+ if (unlikely(iter->trace->name != current_trace->name))
*iter->trace = *current_trace;
- }
mutex_unlock(&trace_types_lock);
mutex_lock(&iter->mutex);
@@ -4037,8 +4063,7 @@
* Reset the buffer so that it doesn't have incomparable timestamps.
*/
tracing_reset_online_cpus(&global_trace);
- if (max_tr.buffer)
- tracing_reset_online_cpus(&max_tr);
+ tracing_reset_online_cpus(&max_tr);
mutex_unlock(&trace_types_lock);
@@ -4054,6 +4079,87 @@
return single_open(file, tracing_clock_show, NULL);
}
+#ifdef CONFIG_TRACER_SNAPSHOT
+static int tracing_snapshot_open(struct inode *inode, struct file *file)
+{
+ struct trace_iterator *iter;
+ int ret = 0;
+
+ if (file->f_mode & FMODE_READ) {
+ iter = __tracing_open(inode, file, true);
+ if (IS_ERR(iter))
+ ret = PTR_ERR(iter);
+ }
+ return ret;
+}
+
+static ssize_t
+tracing_snapshot_write(struct file *filp, const char __user *ubuf, size_t cnt,
+ loff_t *ppos)
+{
+ unsigned long val;
+ int ret;
+
+ ret = tracing_update_buffers();
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&trace_types_lock);
+
+ if (current_trace->use_max_tr) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ switch (val) {
+ case 0:
+ if (current_trace->allocated_snapshot) {
+ /* free spare buffer */
+ ring_buffer_resize(max_tr.buffer, 1,
+ RING_BUFFER_ALL_CPUS);
+ set_buffer_entries(&max_tr, 1);
+ tracing_reset_online_cpus(&max_tr);
+ current_trace->allocated_snapshot = false;
+ }
+ break;
+ case 1:
+ if (!current_trace->allocated_snapshot) {
+ /* allocate spare buffer */
+ ret = resize_buffer_duplicate_size(&max_tr,
+ &global_trace, RING_BUFFER_ALL_CPUS);
+ if (ret < 0)
+ break;
+ current_trace->allocated_snapshot = true;
+ }
+
+ local_irq_disable();
+ /* Now, we're going to swap */
+ update_max_tr(&global_trace, current, smp_processor_id());
+ local_irq_enable();
+ break;
+ default:
+ if (current_trace->allocated_snapshot)
+ tracing_reset_online_cpus(&max_tr);
+ else
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ret >= 0) {
+ *ppos += cnt;
+ ret = cnt;
+ }
+out:
+ mutex_unlock(&trace_types_lock);
+ return ret;
+}
+#endif /* CONFIG_TRACER_SNAPSHOT */
+
+
static const struct file_operations tracing_max_lat_fops = {
.open = tracing_open_generic,
.read = tracing_max_lat_read,
@@ -4110,6 +4216,16 @@
.write = tracing_clock_write,
};
+#ifdef CONFIG_TRACER_SNAPSHOT
+static const struct file_operations snapshot_fops = {
+ .open = tracing_snapshot_open,
+ .read = seq_read,
+ .write = tracing_snapshot_write,
+ .llseek = tracing_seek,
+ .release = tracing_release,
+};
+#endif /* CONFIG_TRACER_SNAPSHOT */
+
struct ftrace_buffer_info {
struct trace_array *tr;
void *spare;
@@ -4414,6 +4530,9 @@
cnt = ring_buffer_dropped_events_cpu(tr->buffer, cpu);
trace_seq_printf(s, "dropped events: %ld\n", cnt);
+ cnt = ring_buffer_read_events_cpu(tr->buffer, cpu);
+ trace_seq_printf(s, "read events: %ld\n", cnt);
+
count = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
kfree(s);
@@ -4490,7 +4609,7 @@
static struct dentry *d_percpu;
-struct dentry *tracing_dentry_percpu(void)
+static struct dentry *tracing_dentry_percpu(void)
{
static int once;
struct dentry *d_tracer;
@@ -4906,6 +5025,11 @@
&ftrace_update_tot_cnt, &tracing_dyn_info_fops);
#endif
+#ifdef CONFIG_TRACER_SNAPSHOT
+ trace_create_file("snapshot", 0644, d_tracer,
+ (void *) TRACE_PIPE_ALL_CPU, &snapshot_fops);
+#endif
+
create_trace_options_dir();
for_each_tracing_cpu(cpu)
@@ -5014,6 +5138,7 @@
if (disable_tracing)
ftrace_kill();
+ /* Simulate the iterator */
trace_init_global_iter(&iter);
for_each_tracing_cpu(cpu) {
@@ -5025,10 +5150,6 @@
/* don't look at user memory in panic mode */
trace_flags &= ~TRACE_ITER_SYM_USEROBJ;
- /* Simulate the iterator */
- iter.tr = &global_trace;
- iter.trace = current_trace;
-
switch (oops_dump_mode) {
case DUMP_ALL:
iter.cpu_file = TRACE_PIPE_ALL_CPU;
@@ -5173,7 +5294,7 @@
init_irq_work(&trace_work_wakeup, trace_wake_up);
register_tracer(&nop_trace);
- current_trace = &nop_trace;
+
/* All seems OK, enable tracing */
tracing_disabled = 0;
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index c75d798..57d7e53 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -287,20 +287,62 @@
struct tracer_flags *flags;
bool print_max;
bool use_max_tr;
+ bool allocated_snapshot;
};
/* Only current can touch trace_recursion */
-#define trace_recursion_inc() do { (current)->trace_recursion++; } while (0)
-#define trace_recursion_dec() do { (current)->trace_recursion--; } while (0)
-/* Ring buffer has the 10 LSB bits to count */
-#define trace_recursion_buffer() ((current)->trace_recursion & 0x3ff)
+/*
+ * For function tracing recursion:
+ * The order of these bits are important.
+ *
+ * When function tracing occurs, the following steps are made:
+ * If arch does not support a ftrace feature:
+ * call internal function (uses INTERNAL bits) which calls...
+ * If callback is registered to the "global" list, the list
+ * function is called and recursion checks the GLOBAL bits.
+ * then this function calls...
+ * The function callback, which can use the FTRACE bits to
+ * check for recursion.
+ *
+ * Now if the arch does not suppport a feature, and it calls
+ * the global list function which calls the ftrace callback
+ * all three of these steps will do a recursion protection.
+ * There's no reason to do one if the previous caller already
+ * did. The recursion that we are protecting against will
+ * go through the same steps again.
+ *
+ * To prevent the multiple recursion checks, if a recursion
+ * bit is set that is higher than the MAX bit of the current
+ * check, then we know that the check was made by the previous
+ * caller, and we can skip the current check.
+ */
+enum {
+ TRACE_BUFFER_BIT,
+ TRACE_BUFFER_NMI_BIT,
+ TRACE_BUFFER_IRQ_BIT,
+ TRACE_BUFFER_SIRQ_BIT,
-/* for function tracing recursion */
-#define TRACE_INTERNAL_BIT (1<<11)
-#define TRACE_GLOBAL_BIT (1<<12)
-#define TRACE_CONTROL_BIT (1<<13)
+ /* Start of function recursion bits */
+ TRACE_FTRACE_BIT,
+ TRACE_FTRACE_NMI_BIT,
+ TRACE_FTRACE_IRQ_BIT,
+ TRACE_FTRACE_SIRQ_BIT,
+
+ /* GLOBAL_BITs must be greater than FTRACE_BITs */
+ TRACE_GLOBAL_BIT,
+ TRACE_GLOBAL_NMI_BIT,
+ TRACE_GLOBAL_IRQ_BIT,
+ TRACE_GLOBAL_SIRQ_BIT,
+
+ /* INTERNAL_BITs must be greater than GLOBAL_BITs */
+ TRACE_INTERNAL_BIT,
+ TRACE_INTERNAL_NMI_BIT,
+ TRACE_INTERNAL_IRQ_BIT,
+ TRACE_INTERNAL_SIRQ_BIT,
+
+ TRACE_CONTROL_BIT,
/*
* Abuse of the trace_recursion.
@@ -309,11 +351,77 @@
* was called in irq context but we have irq tracing off. Since this
* can only be modified by current, we can reuse trace_recursion.
*/
-#define TRACE_IRQ_BIT (1<<13)
+ TRACE_IRQ_BIT,
+};
-#define trace_recursion_set(bit) do { (current)->trace_recursion |= (bit); } while (0)
-#define trace_recursion_clear(bit) do { (current)->trace_recursion &= ~(bit); } while (0)
-#define trace_recursion_test(bit) ((current)->trace_recursion & (bit))
+#define trace_recursion_set(bit) do { (current)->trace_recursion |= (1<<(bit)); } while (0)
+#define trace_recursion_clear(bit) do { (current)->trace_recursion &= ~(1<<(bit)); } while (0)
+#define trace_recursion_test(bit) ((current)->trace_recursion & (1<<(bit)))
+
+#define TRACE_CONTEXT_BITS 4
+
+#define TRACE_FTRACE_START TRACE_FTRACE_BIT
+#define TRACE_FTRACE_MAX ((1 << (TRACE_FTRACE_START + TRACE_CONTEXT_BITS)) - 1)
+
+#define TRACE_GLOBAL_START TRACE_GLOBAL_BIT
+#define TRACE_GLOBAL_MAX ((1 << (TRACE_GLOBAL_START + TRACE_CONTEXT_BITS)) - 1)
+
+#define TRACE_LIST_START TRACE_INTERNAL_BIT
+#define TRACE_LIST_MAX ((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1)
+
+#define TRACE_CONTEXT_MASK TRACE_LIST_MAX
+
+static __always_inline int trace_get_context_bit(void)
+{
+ int bit;
+
+ if (in_interrupt()) {
+ if (in_nmi())
+ bit = 0;
+
+ else if (in_irq())
+ bit = 1;
+ else
+ bit = 2;
+ } else
+ bit = 3;
+
+ return bit;
+}
+
+static __always_inline int trace_test_and_set_recursion(int start, int max)
+{
+ unsigned int val = current->trace_recursion;
+ int bit;
+
+ /* A previous recursion check was made */
+ if ((val & TRACE_CONTEXT_MASK) > max)
+ return 0;
+
+ bit = trace_get_context_bit() + start;
+ if (unlikely(val & (1 << bit)))
+ return -1;
+
+ val |= 1 << bit;
+ current->trace_recursion = val;
+ barrier();
+
+ return bit;
+}
+
+static __always_inline void trace_clear_recursion(int bit)
+{
+ unsigned int val = current->trace_recursion;
+
+ if (!bit)
+ return;
+
+ bit = 1 << bit;
+ val &= ~bit;
+
+ barrier();
+ current->trace_recursion = val;
+}
#define TRACE_PIPE_ALL_CPU -1
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 3947835..aa8f5f4 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -21,8 +21,6 @@
#include <linux/ktime.h>
#include <linux/trace_clock.h>
-#include "trace.h"
-
/*
* trace_clock_local(): the simplest and least coherent tracing clock.
*
@@ -44,6 +42,7 @@
return clock;
}
+EXPORT_SYMBOL_GPL(trace_clock_local);
/*
* trace_clock(): 'between' trace clock. Not completely serialized,
@@ -86,7 +85,7 @@
local_irq_save(flags);
this_cpu = raw_smp_processor_id();
- now = cpu_clock(this_cpu);
+ now = sched_clock_cpu(this_cpu);
/*
* If in an NMI context then dont risk lockups and return the
* cpu_clock() time:
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 880073d..57e9b28 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -116,7 +116,6 @@
__common_field(unsigned char, flags);
__common_field(unsigned char, preempt_count);
__common_field(int, pid);
- __common_field(int, padding);
return ret;
}
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 8e3ad80..6011525 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -47,34 +47,6 @@
tracing_reset_online_cpus(tr);
}
-static void
-function_trace_call_preempt_only(unsigned long ip, unsigned long parent_ip,
- struct ftrace_ops *op, struct pt_regs *pt_regs)
-{
- struct trace_array *tr = func_trace;
- struct trace_array_cpu *data;
- unsigned long flags;
- long disabled;
- int cpu;
- int pc;
-
- if (unlikely(!ftrace_function_enabled))
- return;
-
- pc = preempt_count();
- preempt_disable_notrace();
- local_save_flags(flags);
- cpu = raw_smp_processor_id();
- data = tr->data[cpu];
- disabled = atomic_inc_return(&data->disabled);
-
- if (likely(disabled == 1))
- trace_function(tr, ip, parent_ip, flags, pc);
-
- atomic_dec(&data->disabled);
- preempt_enable_notrace();
-}
-
/* Our option */
enum {
TRACE_FUNC_OPT_STACK = 0x1,
@@ -85,34 +57,34 @@
static void
function_trace_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *pt_regs)
-
{
struct trace_array *tr = func_trace;
struct trace_array_cpu *data;
unsigned long flags;
- long disabled;
+ int bit;
int cpu;
int pc;
if (unlikely(!ftrace_function_enabled))
return;
- /*
- * Need to use raw, since this must be called before the
- * recursive protection is performed.
- */
- local_irq_save(flags);
- cpu = raw_smp_processor_id();
- data = tr->data[cpu];
- disabled = atomic_inc_return(&data->disabled);
+ pc = preempt_count();
+ preempt_disable_notrace();
- if (likely(disabled == 1)) {
- pc = preempt_count();
+ bit = trace_test_and_set_recursion(TRACE_FTRACE_START, TRACE_FTRACE_MAX);
+ if (bit < 0)
+ goto out;
+
+ cpu = smp_processor_id();
+ data = tr->data[cpu];
+ if (!atomic_read(&data->disabled)) {
+ local_save_flags(flags);
trace_function(tr, ip, parent_ip, flags, pc);
}
+ trace_clear_recursion(bit);
- atomic_dec(&data->disabled);
- local_irq_restore(flags);
+ out:
+ preempt_enable_notrace();
}
static void
@@ -185,11 +157,6 @@
{
ftrace_function_enabled = 0;
- if (trace_flags & TRACE_ITER_PREEMPTONLY)
- trace_ops.func = function_trace_call_preempt_only;
- else
- trace_ops.func = function_trace_call;
-
if (func_flags.val & TRACE_FUNC_OPT_STACK)
register_ftrace_function(&trace_stack_ops);
else
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 4edb4b7..39ada66 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -47,6 +47,8 @@
#define TRACE_GRAPH_PRINT_ABS_TIME 0x20
#define TRACE_GRAPH_PRINT_IRQS 0x40
+static unsigned int max_depth;
+
static struct tracer_opt trace_opts[] = {
/* Display overruns? (for self-debug purpose) */
{ TRACER_OPT(funcgraph-overrun, TRACE_GRAPH_PRINT_OVERRUN) },
@@ -189,10 +191,16 @@
ftrace_pop_return_trace(&trace, &ret, frame_pointer);
trace.rettime = trace_clock_local();
- ftrace_graph_return(&trace);
barrier();
current->curr_ret_stack--;
+ /*
+ * The trace should run after decrementing the ret counter
+ * in case an interrupt were to come in. We don't want to
+ * lose the interrupt if max_depth is set.
+ */
+ ftrace_graph_return(&trace);
+
if (unlikely(!ret)) {
ftrace_graph_stop();
WARN_ON(1);
@@ -250,8 +258,9 @@
return 0;
/* trace it when it is-nested-in or is a function enabled. */
- if (!(trace->depth || ftrace_graph_addr(trace->func)) ||
- ftrace_graph_ignore_irqs())
+ if ((!(trace->depth || ftrace_graph_addr(trace->func)) ||
+ ftrace_graph_ignore_irqs()) ||
+ (max_depth && trace->depth >= max_depth))
return 0;
local_irq_save(flags);
@@ -1457,6 +1466,59 @@
#endif
};
+
+static ssize_t
+graph_depth_write(struct file *filp, const char __user *ubuf, size_t cnt,
+ loff_t *ppos)
+{
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
+ if (ret)
+ return ret;
+
+ max_depth = val;
+
+ *ppos += cnt;
+
+ return cnt;
+}
+
+static ssize_t
+graph_depth_read(struct file *filp, char __user *ubuf, size_t cnt,
+ loff_t *ppos)
+{
+ char buf[15]; /* More than enough to hold UINT_MAX + "\n"*/
+ int n;
+
+ n = sprintf(buf, "%d\n", max_depth);
+
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, n);
+}
+
+static const struct file_operations graph_depth_fops = {
+ .open = tracing_open_generic,
+ .write = graph_depth_write,
+ .read = graph_depth_read,
+ .llseek = generic_file_llseek,
+};
+
+static __init int init_graph_debugfs(void)
+{
+ struct dentry *d_tracer;
+
+ d_tracer = tracing_init_dentry();
+ if (!d_tracer)
+ return 0;
+
+ trace_create_file("max_graph_depth", 0644, d_tracer,
+ NULL, &graph_depth_fops);
+
+ return 0;
+}
+fs_initcall(init_graph_debugfs);
+
static __init int init_graph_trace(void)
{
max_bytes_for_cpu = snprintf(NULL, 0, "%d", nr_cpu_ids - 1);
diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
index 9337086..5c7e09d 100644
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -66,7 +66,6 @@
#define TP_FLAG_TRACE 1
#define TP_FLAG_PROFILE 2
#define TP_FLAG_REGISTERED 4
-#define TP_FLAG_UPROBE 8
/* data_rloc: data relative location, compatible with u32 */
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 9fe45fc..75aa97f 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -15,8 +15,8 @@
#include <linux/kallsyms.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
+#include <linux/sched/rt.h>
#include <trace/events/sched.h>
-
#include "trace.h"
static struct trace_array *wakeup_trace;
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 4762316..51c819c 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -415,7 +415,8 @@
* The ftrace infrastructure should provide the recursion
* protection. If not, this will crash the kernel!
*/
- trace_selftest_recursion_cnt++;
+ if (trace_selftest_recursion_cnt++ > 10)
+ return;
DYN_FTRACE_TEST_NAME();
}
@@ -452,7 +453,6 @@
char *func_name;
int len;
int ret;
- int cnt;
/* The previous test PASSED */
pr_cont("PASSED\n");
@@ -510,19 +510,10 @@
unregister_ftrace_function(&test_recsafe_probe);
- /*
- * If arch supports all ftrace features, and no other task
- * was on the list, we should be fine.
- */
- if (!ftrace_nr_registered_ops() && !FTRACE_FORCE_LIST_FUNC)
- cnt = 2; /* Should have recursed */
- else
- cnt = 1;
-
ret = -1;
- if (trace_selftest_recursion_cnt != cnt) {
- pr_cont("*callback not called expected %d times (%d)* ",
- cnt, trace_selftest_recursion_cnt);
+ if (trace_selftest_recursion_cnt != 2) {
+ pr_cont("*callback not called expected 2 times (%d)* ",
+ trace_selftest_recursion_cnt);
goto out;
}
@@ -568,7 +559,7 @@
int ret;
int supported = 0;
-#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
supported = 1;
#endif
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 7609dd6..5329e13e 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -77,7 +77,7 @@
return syscalls_metadata[nr];
}
-enum print_line_t
+static enum print_line_t
print_syscall_enter(struct trace_iterator *iter, int flags,
struct trace_event *event)
{
@@ -130,7 +130,7 @@
return TRACE_TYPE_HANDLED;
}
-enum print_line_t
+static enum print_line_t
print_syscall_exit(struct trace_iterator *iter, int flags,
struct trace_event *event)
{
@@ -270,7 +270,7 @@
return ret;
}
-void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
+static void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
{
struct syscall_trace_enter *entry;
struct syscall_metadata *sys_data;
@@ -305,7 +305,7 @@
trace_current_buffer_unlock_commit(buffer, event, 0, 0);
}
-void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
+static void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
{
struct syscall_trace_exit *entry;
struct syscall_metadata *sys_data;
@@ -337,7 +337,7 @@
trace_current_buffer_unlock_commit(buffer, event, 0, 0);
}
-int reg_event_syscall_enter(struct ftrace_event_call *call)
+static int reg_event_syscall_enter(struct ftrace_event_call *call)
{
int ret = 0;
int num;
@@ -356,7 +356,7 @@
return ret;
}
-void unreg_event_syscall_enter(struct ftrace_event_call *call)
+static void unreg_event_syscall_enter(struct ftrace_event_call *call)
{
int num;
@@ -371,7 +371,7 @@
mutex_unlock(&syscall_trace_lock);
}
-int reg_event_syscall_exit(struct ftrace_event_call *call)
+static int reg_event_syscall_exit(struct ftrace_event_call *call)
{
int ret = 0;
int num;
@@ -390,7 +390,7 @@
return ret;
}
-void unreg_event_syscall_exit(struct ftrace_event_call *call)
+static void unreg_event_syscall_exit(struct ftrace_event_call *call)
{
int num;
@@ -459,7 +459,7 @@
return (unsigned long)sys_call_table[nr];
}
-int __init init_ftrace_syscalls(void)
+static int __init init_ftrace_syscalls(void)
{
struct syscall_metadata *meta;
unsigned long addr;
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index c86e6d4..8dad2a9 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -28,20 +28,21 @@
#define UPROBE_EVENT_SYSTEM "uprobes"
+struct trace_uprobe_filter {
+ rwlock_t rwlock;
+ int nr_systemwide;
+ struct list_head perf_events;
+};
+
/*
* uprobe event core functions
*/
-struct trace_uprobe;
-struct uprobe_trace_consumer {
- struct uprobe_consumer cons;
- struct trace_uprobe *tu;
-};
-
struct trace_uprobe {
struct list_head list;
struct ftrace_event_class class;
struct ftrace_event_call call;
- struct uprobe_trace_consumer *consumer;
+ struct trace_uprobe_filter filter;
+ struct uprobe_consumer consumer;
struct inode *inode;
char *filename;
unsigned long offset;
@@ -64,6 +65,18 @@
static int uprobe_dispatcher(struct uprobe_consumer *con, struct pt_regs *regs);
+static inline void init_trace_uprobe_filter(struct trace_uprobe_filter *filter)
+{
+ rwlock_init(&filter->rwlock);
+ filter->nr_systemwide = 0;
+ INIT_LIST_HEAD(&filter->perf_events);
+}
+
+static inline bool uprobe_filter_is_empty(struct trace_uprobe_filter *filter)
+{
+ return !filter->nr_systemwide && list_empty(&filter->perf_events);
+}
+
/*
* Allocate new trace_uprobe and initialize it (including uprobes).
*/
@@ -92,6 +105,8 @@
goto error;
INIT_LIST_HEAD(&tu->list);
+ tu->consumer.handler = uprobe_dispatcher;
+ init_trace_uprobe_filter(&tu->filter);
return tu;
error:
@@ -253,12 +268,18 @@
if (ret)
goto fail_address_parse;
+ inode = igrab(path.dentry->d_inode);
+ path_put(&path);
+
+ if (!inode || !S_ISREG(inode->i_mode)) {
+ ret = -EINVAL;
+ goto fail_address_parse;
+ }
+
ret = kstrtoul(arg, 0, &offset);
if (ret)
goto fail_address_parse;
- inode = igrab(path.dentry->d_inode);
-
argc -= 2;
argv += 2;
@@ -356,7 +377,7 @@
if (inode)
iput(inode);
- pr_info("Failed to parse address.\n");
+ pr_info("Failed to parse address or file.\n");
return ret;
}
@@ -465,7 +486,7 @@
};
/* uprobe handler */
-static void uprobe_trace_func(struct trace_uprobe *tu, struct pt_regs *regs)
+static int uprobe_trace_func(struct trace_uprobe *tu, struct pt_regs *regs)
{
struct uprobe_trace_entry_head *entry;
struct ring_buffer_event *event;
@@ -475,8 +496,6 @@
unsigned long irq_flags;
struct ftrace_event_call *call = &tu->call;
- tu->nhit++;
-
local_save_flags(irq_flags);
pc = preempt_count();
@@ -485,16 +504,18 @@
event = trace_current_buffer_lock_reserve(&buffer, call->event.type,
size, irq_flags, pc);
if (!event)
- return;
+ return 0;
entry = ring_buffer_event_data(event);
- entry->ip = uprobe_get_swbp_addr(task_pt_regs(current));
+ entry->ip = instruction_pointer(task_pt_regs(current));
data = (u8 *)&entry[1];
for (i = 0; i < tu->nr_args; i++)
call_fetch(&tu->args[i].fetch, regs, data + tu->args[i].offset);
if (!filter_current_check_discard(buffer, call, entry, event))
trace_buffer_unlock_commit(buffer, event, irq_flags, pc);
+
+ return 0;
}
/* Event entry printers */
@@ -533,42 +554,43 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static int probe_event_enable(struct trace_uprobe *tu, int flag)
+static inline bool is_trace_uprobe_enabled(struct trace_uprobe *tu)
{
- struct uprobe_trace_consumer *utc;
+ return tu->flags & (TP_FLAG_TRACE | TP_FLAG_PROFILE);
+}
+
+typedef bool (*filter_func_t)(struct uprobe_consumer *self,
+ enum uprobe_filter_ctx ctx,
+ struct mm_struct *mm);
+
+static int
+probe_event_enable(struct trace_uprobe *tu, int flag, filter_func_t filter)
+{
int ret = 0;
- if (!tu->inode || tu->consumer)
+ if (is_trace_uprobe_enabled(tu))
return -EINTR;
- utc = kzalloc(sizeof(struct uprobe_trace_consumer), GFP_KERNEL);
- if (!utc)
- return -EINTR;
-
- utc->cons.handler = uprobe_dispatcher;
- utc->cons.filter = NULL;
- ret = uprobe_register(tu->inode, tu->offset, &utc->cons);
- if (ret) {
- kfree(utc);
- return ret;
- }
+ WARN_ON(!uprobe_filter_is_empty(&tu->filter));
tu->flags |= flag;
- utc->tu = tu;
- tu->consumer = utc;
+ tu->consumer.filter = filter;
+ ret = uprobe_register(tu->inode, tu->offset, &tu->consumer);
+ if (ret)
+ tu->flags &= ~flag;
- return 0;
+ return ret;
}
static void probe_event_disable(struct trace_uprobe *tu, int flag)
{
- if (!tu->inode || !tu->consumer)
+ if (!is_trace_uprobe_enabled(tu))
return;
- uprobe_unregister(tu->inode, tu->offset, &tu->consumer->cons);
+ WARN_ON(!uprobe_filter_is_empty(&tu->filter));
+
+ uprobe_unregister(tu->inode, tu->offset, &tu->consumer);
tu->flags &= ~flag;
- kfree(tu->consumer);
- tu->consumer = NULL;
}
static int uprobe_event_define_fields(struct ftrace_event_call *event_call)
@@ -642,8 +664,96 @@
}
#ifdef CONFIG_PERF_EVENTS
+static bool
+__uprobe_perf_filter(struct trace_uprobe_filter *filter, struct mm_struct *mm)
+{
+ struct perf_event *event;
+
+ if (filter->nr_systemwide)
+ return true;
+
+ list_for_each_entry(event, &filter->perf_events, hw.tp_list) {
+ if (event->hw.tp_target->mm == mm)
+ return true;
+ }
+
+ return false;
+}
+
+static inline bool
+uprobe_filter_event(struct trace_uprobe *tu, struct perf_event *event)
+{
+ return __uprobe_perf_filter(&tu->filter, event->hw.tp_target->mm);
+}
+
+static int uprobe_perf_open(struct trace_uprobe *tu, struct perf_event *event)
+{
+ bool done;
+
+ write_lock(&tu->filter.rwlock);
+ if (event->hw.tp_target) {
+ /*
+ * event->parent != NULL means copy_process(), we can avoid
+ * uprobe_apply(). current->mm must be probed and we can rely
+ * on dup_mmap() which preserves the already installed bp's.
+ *
+ * attr.enable_on_exec means that exec/mmap will install the
+ * breakpoints we need.
+ */
+ done = tu->filter.nr_systemwide ||
+ event->parent || event->attr.enable_on_exec ||
+ uprobe_filter_event(tu, event);
+ list_add(&event->hw.tp_list, &tu->filter.perf_events);
+ } else {
+ done = tu->filter.nr_systemwide;
+ tu->filter.nr_systemwide++;
+ }
+ write_unlock(&tu->filter.rwlock);
+
+ if (!done)
+ uprobe_apply(tu->inode, tu->offset, &tu->consumer, true);
+
+ return 0;
+}
+
+static int uprobe_perf_close(struct trace_uprobe *tu, struct perf_event *event)
+{
+ bool done;
+
+ write_lock(&tu->filter.rwlock);
+ if (event->hw.tp_target) {
+ list_del(&event->hw.tp_list);
+ done = tu->filter.nr_systemwide ||
+ (event->hw.tp_target->flags & PF_EXITING) ||
+ uprobe_filter_event(tu, event);
+ } else {
+ tu->filter.nr_systemwide--;
+ done = tu->filter.nr_systemwide;
+ }
+ write_unlock(&tu->filter.rwlock);
+
+ if (!done)
+ uprobe_apply(tu->inode, tu->offset, &tu->consumer, false);
+
+ return 0;
+}
+
+static bool uprobe_perf_filter(struct uprobe_consumer *uc,
+ enum uprobe_filter_ctx ctx, struct mm_struct *mm)
+{
+ struct trace_uprobe *tu;
+ int ret;
+
+ tu = container_of(uc, struct trace_uprobe, consumer);
+ read_lock(&tu->filter.rwlock);
+ ret = __uprobe_perf_filter(&tu->filter, mm);
+ read_unlock(&tu->filter.rwlock);
+
+ return ret;
+}
+
/* uprobe profile handler */
-static void uprobe_perf_func(struct trace_uprobe *tu, struct pt_regs *regs)
+static int uprobe_perf_func(struct trace_uprobe *tu, struct pt_regs *regs)
{
struct ftrace_event_call *call = &tu->call;
struct uprobe_trace_entry_head *entry;
@@ -652,11 +762,14 @@
int size, __size, i;
int rctx;
+ if (!uprobe_perf_filter(&tu->consumer, 0, current->mm))
+ return UPROBE_HANDLER_REMOVE;
+
__size = sizeof(*entry) + tu->size;
size = ALIGN(__size + sizeof(u32), sizeof(u64));
size -= sizeof(u32);
if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE, "profile buffer not large enough"))
- return;
+ return 0;
preempt_disable();
@@ -664,7 +777,7 @@
if (!entry)
goto out;
- entry->ip = uprobe_get_swbp_addr(task_pt_regs(current));
+ entry->ip = instruction_pointer(task_pt_regs(current));
data = (u8 *)&entry[1];
for (i = 0; i < tu->nr_args; i++)
call_fetch(&tu->args[i].fetch, regs, data + tu->args[i].offset);
@@ -674,6 +787,7 @@
out:
preempt_enable();
+ return 0;
}
#endif /* CONFIG_PERF_EVENTS */
@@ -684,7 +798,7 @@
switch (type) {
case TRACE_REG_REGISTER:
- return probe_event_enable(tu, TP_FLAG_TRACE);
+ return probe_event_enable(tu, TP_FLAG_TRACE, NULL);
case TRACE_REG_UNREGISTER:
probe_event_disable(tu, TP_FLAG_TRACE);
@@ -692,11 +806,18 @@
#ifdef CONFIG_PERF_EVENTS
case TRACE_REG_PERF_REGISTER:
- return probe_event_enable(tu, TP_FLAG_PROFILE);
+ return probe_event_enable(tu, TP_FLAG_PROFILE, uprobe_perf_filter);
case TRACE_REG_PERF_UNREGISTER:
probe_event_disable(tu, TP_FLAG_PROFILE);
return 0;
+
+ case TRACE_REG_PERF_OPEN:
+ return uprobe_perf_open(tu, data);
+
+ case TRACE_REG_PERF_CLOSE:
+ return uprobe_perf_close(tu, data);
+
#endif
default:
return 0;
@@ -706,22 +827,20 @@
static int uprobe_dispatcher(struct uprobe_consumer *con, struct pt_regs *regs)
{
- struct uprobe_trace_consumer *utc;
struct trace_uprobe *tu;
+ int ret = 0;
- utc = container_of(con, struct uprobe_trace_consumer, cons);
- tu = utc->tu;
- if (!tu || tu->consumer != utc)
- return 0;
+ tu = container_of(con, struct trace_uprobe, consumer);
+ tu->nhit++;
if (tu->flags & TP_FLAG_TRACE)
- uprobe_trace_func(tu, regs);
+ ret |= uprobe_trace_func(tu, regs);
#ifdef CONFIG_PERF_EVENTS
if (tu->flags & TP_FLAG_PROFILE)
- uprobe_perf_func(tu, regs);
+ ret |= uprobe_perf_func(tu, regs);
#endif
- return 0;
+ return ret;
}
static struct trace_event_functions uprobe_funcs = {
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 625df0b..a1dd9a1 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -32,6 +32,7 @@
{
const struct cred *tcred;
struct timespec uptime, ts;
+ cputime_t utime, stime, utimescaled, stimescaled;
u64 ac_etime;
BUILD_BUG_ON(TS_COMM_LEN < TASK_COMM_LEN);
@@ -65,10 +66,15 @@
stats->ac_ppid = pid_alive(tsk) ?
task_tgid_nr_ns(rcu_dereference(tsk->real_parent), pid_ns) : 0;
rcu_read_unlock();
- stats->ac_utime = cputime_to_usecs(tsk->utime);
- stats->ac_stime = cputime_to_usecs(tsk->stime);
- stats->ac_utimescaled = cputime_to_usecs(tsk->utimescaled);
- stats->ac_stimescaled = cputime_to_usecs(tsk->stimescaled);
+
+ task_cputime(tsk, &utime, &stime);
+ stats->ac_utime = cputime_to_usecs(utime);
+ stats->ac_stime = cputime_to_usecs(stime);
+
+ task_cputime_scaled(tsk, &utimescaled, &stimescaled);
+ stats->ac_utimescaled = cputime_to_usecs(utimescaled);
+ stats->ac_stimescaled = cputime_to_usecs(stimescaled);
+
stats->ac_minflt = tsk->min_flt;
stats->ac_majflt = tsk->maj_flt;
@@ -115,11 +121,8 @@
#undef KB
#undef MB
-/**
- * acct_update_integrals - update mm integral fields in task_struct
- * @tsk: task_struct for accounting
- */
-void acct_update_integrals(struct task_struct *tsk)
+static void __acct_update_integrals(struct task_struct *tsk,
+ cputime_t utime, cputime_t stime)
{
if (likely(tsk->mm)) {
cputime_t time, dtime;
@@ -128,7 +131,7 @@
u64 delta;
local_irq_save(flags);
- time = tsk->stime + tsk->utime;
+ time = stime + utime;
dtime = time - tsk->acct_timexpd;
jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
delta = value.tv_sec;
@@ -145,6 +148,27 @@
}
/**
+ * acct_update_integrals - update mm integral fields in task_struct
+ * @tsk: task_struct for accounting
+ */
+void acct_update_integrals(struct task_struct *tsk)
+{
+ cputime_t utime, stime;
+
+ task_cputime(tsk, &utime, &stime);
+ __acct_update_integrals(tsk, utime, stime);
+}
+
+/**
+ * acct_account_cputime - update mm integral after cputime update
+ * @tsk: task_struct for accounting
+ */
+void acct_account_cputime(struct task_struct *tsk)
+{
+ __acct_update_integrals(tsk, tsk->utime, tsk->stime);
+}
+
+/**
* acct_clear_integrals - clear the mm integral fields in task_struct
* @tsk: task_struct whose accounting fields are cleared
*/
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 75a2ab3..2768942 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/sysctl.h>
#include <linux/smpboot.h>
+#include <linux/sched/rt.h>
#include <asm/irq_regs.h>
#include <linux/kvm_para.h>
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index fbc6576..f4feaca 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -41,32 +41,31 @@
#include <linux/debug_locks.h>
#include <linux/lockdep.h>
#include <linux/idr.h>
+#include <linux/hashtable.h>
-#include "workqueue_sched.h"
+#include "workqueue_internal.h"
enum {
/*
- * global_cwq flags
+ * worker_pool flags
*
- * A bound gcwq is either associated or disassociated with its CPU.
+ * A bound pool is either associated or disassociated with its CPU.
* While associated (!DISASSOCIATED), all workers are bound to the
* CPU and none has %WORKER_UNBOUND set and concurrency management
* is in effect.
*
* While DISASSOCIATED, the cpu may be offline and all workers have
* %WORKER_UNBOUND set and concurrency management disabled, and may
- * be executing on any CPU. The gcwq behaves as an unbound one.
+ * be executing on any CPU. The pool behaves as an unbound one.
*
* Note that DISASSOCIATED can be flipped only while holding
- * assoc_mutex of all pools on the gcwq to avoid changing binding
- * state while create_worker() is in progress.
+ * assoc_mutex to avoid changing binding state while
+ * create_worker() is in progress.
*/
- GCWQ_DISASSOCIATED = 1 << 0, /* cpu can't serve workers */
- GCWQ_FREEZING = 1 << 1, /* freeze in progress */
-
- /* pool flags */
POOL_MANAGE_WORKERS = 1 << 0, /* need to manage workers */
POOL_MANAGING_WORKERS = 1 << 1, /* managing workers */
+ POOL_DISASSOCIATED = 1 << 2, /* cpu can't serve workers */
+ POOL_FREEZING = 1 << 3, /* freeze in progress */
/* worker flags */
WORKER_STARTED = 1 << 0, /* started */
@@ -79,11 +78,9 @@
WORKER_NOT_RUNNING = WORKER_PREP | WORKER_UNBOUND |
WORKER_CPU_INTENSIVE,
- NR_WORKER_POOLS = 2, /* # worker pools per gcwq */
+ NR_STD_WORKER_POOLS = 2, /* # standard pools per cpu */
BUSY_WORKER_HASH_ORDER = 6, /* 64 pointers */
- BUSY_WORKER_HASH_SIZE = 1 << BUSY_WORKER_HASH_ORDER,
- BUSY_WORKER_HASH_MASK = BUSY_WORKER_HASH_SIZE - 1,
MAX_IDLE_WORKERS_RATIO = 4, /* 1/4 of busy can be idle */
IDLE_WORKER_TIMEOUT = 300 * HZ, /* keep idle ones for 5 mins */
@@ -111,48 +108,24 @@
* P: Preemption protected. Disabling preemption is enough and should
* only be modified and accessed from the local cpu.
*
- * L: gcwq->lock protected. Access with gcwq->lock held.
+ * L: pool->lock protected. Access with pool->lock held.
*
- * X: During normal operation, modification requires gcwq->lock and
- * should be done only from local cpu. Either disabling preemption
- * on local cpu or grabbing gcwq->lock is enough for read access.
- * If GCWQ_DISASSOCIATED is set, it's identical to L.
+ * X: During normal operation, modification requires pool->lock and should
+ * be done only from local cpu. Either disabling preemption on local
+ * cpu or grabbing pool->lock is enough for read access. If
+ * POOL_DISASSOCIATED is set, it's identical to L.
*
* F: wq->flush_mutex protected.
*
* W: workqueue_lock protected.
*/
-struct global_cwq;
-struct worker_pool;
-
-/*
- * The poor guys doing the actual heavy lifting. All on-duty workers
- * are either serving the manager role, on idle list or on busy hash.
- */
-struct worker {
- /* on idle list while idle, on busy hash table while busy */
- union {
- struct list_head entry; /* L: while idle */
- struct hlist_node hentry; /* L: while busy */
- };
-
- struct work_struct *current_work; /* L: work being processed */
- struct cpu_workqueue_struct *current_cwq; /* L: current_work's cwq */
- struct list_head scheduled; /* L: scheduled works */
- struct task_struct *task; /* I: worker task */
- struct worker_pool *pool; /* I: the associated pool */
- /* 64 bytes boundary on 64bit, 32 on 32bit */
- unsigned long last_active; /* L: last active timestamp */
- unsigned int flags; /* X: flags */
- int id; /* I: worker id */
-
- /* for rebinding worker to CPU */
- struct work_struct rebind_work; /* L: for busy worker */
-};
+/* struct worker is defined in workqueue_internal.h */
struct worker_pool {
- struct global_cwq *gcwq; /* I: the owning gcwq */
+ spinlock_t lock; /* the pool lock */
+ unsigned int cpu; /* I: the associated cpu */
+ int id; /* I: pool ID */
unsigned int flags; /* X: flags */
struct list_head worklist; /* L: list of pending works */
@@ -165,34 +138,28 @@
struct timer_list idle_timer; /* L: worker idle timeout */
struct timer_list mayday_timer; /* L: SOS timer for workers */
- struct mutex assoc_mutex; /* protect GCWQ_DISASSOCIATED */
- struct ida worker_ida; /* L: for worker IDs */
-};
-
-/*
- * Global per-cpu workqueue. There's one and only one for each cpu
- * and all works are queued and processed here regardless of their
- * target workqueues.
- */
-struct global_cwq {
- spinlock_t lock; /* the gcwq lock */
- unsigned int cpu; /* I: the associated cpu */
- unsigned int flags; /* L: GCWQ_* flags */
-
- /* workers are chained either in busy_hash or pool idle_list */
- struct hlist_head busy_hash[BUSY_WORKER_HASH_SIZE];
+ /* workers are chained either in busy_hash or idle_list */
+ DECLARE_HASHTABLE(busy_hash, BUSY_WORKER_HASH_ORDER);
/* L: hash of busy workers */
- struct worker_pool pools[NR_WORKER_POOLS];
- /* normal and highpri pools */
+ struct mutex assoc_mutex; /* protect POOL_DISASSOCIATED */
+ struct ida worker_ida; /* L: for worker IDs */
+
+ /*
+ * The current concurrency level. As it's likely to be accessed
+ * from other CPUs during try_to_wake_up(), put it in a separate
+ * cacheline.
+ */
+ atomic_t nr_running ____cacheline_aligned_in_smp;
} ____cacheline_aligned_in_smp;
/*
- * The per-CPU workqueue. The lower WORK_STRUCT_FLAG_BITS of
- * work_struct->data are used for flags and thus cwqs need to be
- * aligned at two's power of the number of flag bits.
+ * The per-pool workqueue. While queued, the lower WORK_STRUCT_FLAG_BITS
+ * of work_struct->data are used for flags and the remaining high bits
+ * point to the pwq; thus, pwqs need to be aligned at two's power of the
+ * number of flag bits.
*/
-struct cpu_workqueue_struct {
+struct pool_workqueue {
struct worker_pool *pool; /* I: the associated pool */
struct workqueue_struct *wq; /* I: the owning workqueue */
int work_color; /* L: current color */
@@ -241,16 +208,16 @@
struct workqueue_struct {
unsigned int flags; /* W: WQ_* flags */
union {
- struct cpu_workqueue_struct __percpu *pcpu;
- struct cpu_workqueue_struct *single;
+ struct pool_workqueue __percpu *pcpu;
+ struct pool_workqueue *single;
unsigned long v;
- } cpu_wq; /* I: cwq's */
+ } pool_wq; /* I: pwq's */
struct list_head list; /* W: list of all workqueues */
struct mutex flush_mutex; /* protects wq flushing */
int work_color; /* F: current work color */
int flush_color; /* F: current flush color */
- atomic_t nr_cwqs_to_flush; /* flush in progress */
+ atomic_t nr_pwqs_to_flush; /* flush in progress */
struct wq_flusher *first_flusher; /* F: first flusher */
struct list_head flusher_queue; /* F: flush waiters */
struct list_head flusher_overflow; /* F: flush overflow list */
@@ -259,7 +226,7 @@
struct worker *rescuer; /* I: rescue worker */
int nr_drainers; /* W: drain in progress */
- int saved_max_active; /* W: saved cwq max_active */
+ int saved_max_active; /* W: saved pwq max_active */
#ifdef CONFIG_LOCKDEP
struct lockdep_map lockdep_map;
#endif
@@ -280,16 +247,15 @@
#define CREATE_TRACE_POINTS
#include <trace/events/workqueue.h>
-#define for_each_worker_pool(pool, gcwq) \
- for ((pool) = &(gcwq)->pools[0]; \
- (pool) < &(gcwq)->pools[NR_WORKER_POOLS]; (pool)++)
+#define for_each_std_worker_pool(pool, cpu) \
+ for ((pool) = &std_worker_pools(cpu)[0]; \
+ (pool) < &std_worker_pools(cpu)[NR_STD_WORKER_POOLS]; (pool)++)
-#define for_each_busy_worker(worker, i, pos, gcwq) \
- for (i = 0; i < BUSY_WORKER_HASH_SIZE; i++) \
- hlist_for_each_entry(worker, pos, &gcwq->busy_hash[i], hentry)
+#define for_each_busy_worker(worker, i, pos, pool) \
+ hash_for_each(pool->busy_hash, i, pos, worker, hentry)
-static inline int __next_gcwq_cpu(int cpu, const struct cpumask *mask,
- unsigned int sw)
+static inline int __next_wq_cpu(int cpu, const struct cpumask *mask,
+ unsigned int sw)
{
if (cpu < nr_cpu_ids) {
if (sw & 1) {
@@ -300,42 +266,42 @@
if (sw & 2)
return WORK_CPU_UNBOUND;
}
- return WORK_CPU_NONE;
+ return WORK_CPU_END;
}
-static inline int __next_wq_cpu(int cpu, const struct cpumask *mask,
- struct workqueue_struct *wq)
+static inline int __next_pwq_cpu(int cpu, const struct cpumask *mask,
+ struct workqueue_struct *wq)
{
- return __next_gcwq_cpu(cpu, mask, !(wq->flags & WQ_UNBOUND) ? 1 : 2);
+ return __next_wq_cpu(cpu, mask, !(wq->flags & WQ_UNBOUND) ? 1 : 2);
}
/*
* CPU iterators
*
- * An extra gcwq is defined for an invalid cpu number
+ * An extra cpu number is defined using an invalid cpu number
* (WORK_CPU_UNBOUND) to host workqueues which are not bound to any
- * specific CPU. The following iterators are similar to
- * for_each_*_cpu() iterators but also considers the unbound gcwq.
+ * specific CPU. The following iterators are similar to for_each_*_cpu()
+ * iterators but also considers the unbound CPU.
*
- * for_each_gcwq_cpu() : possible CPUs + WORK_CPU_UNBOUND
- * for_each_online_gcwq_cpu() : online CPUs + WORK_CPU_UNBOUND
- * for_each_cwq_cpu() : possible CPUs for bound workqueues,
+ * for_each_wq_cpu() : possible CPUs + WORK_CPU_UNBOUND
+ * for_each_online_wq_cpu() : online CPUs + WORK_CPU_UNBOUND
+ * for_each_pwq_cpu() : possible CPUs for bound workqueues,
* WORK_CPU_UNBOUND for unbound workqueues
*/
-#define for_each_gcwq_cpu(cpu) \
- for ((cpu) = __next_gcwq_cpu(-1, cpu_possible_mask, 3); \
- (cpu) < WORK_CPU_NONE; \
- (cpu) = __next_gcwq_cpu((cpu), cpu_possible_mask, 3))
+#define for_each_wq_cpu(cpu) \
+ for ((cpu) = __next_wq_cpu(-1, cpu_possible_mask, 3); \
+ (cpu) < WORK_CPU_END; \
+ (cpu) = __next_wq_cpu((cpu), cpu_possible_mask, 3))
-#define for_each_online_gcwq_cpu(cpu) \
- for ((cpu) = __next_gcwq_cpu(-1, cpu_online_mask, 3); \
- (cpu) < WORK_CPU_NONE; \
- (cpu) = __next_gcwq_cpu((cpu), cpu_online_mask, 3))
+#define for_each_online_wq_cpu(cpu) \
+ for ((cpu) = __next_wq_cpu(-1, cpu_online_mask, 3); \
+ (cpu) < WORK_CPU_END; \
+ (cpu) = __next_wq_cpu((cpu), cpu_online_mask, 3))
-#define for_each_cwq_cpu(cpu, wq) \
- for ((cpu) = __next_wq_cpu(-1, cpu_possible_mask, (wq)); \
- (cpu) < WORK_CPU_NONE; \
- (cpu) = __next_wq_cpu((cpu), cpu_possible_mask, (wq)))
+#define for_each_pwq_cpu(cpu, wq) \
+ for ((cpu) = __next_pwq_cpu(-1, cpu_possible_mask, (wq)); \
+ (cpu) < WORK_CPU_END; \
+ (cpu) = __next_pwq_cpu((cpu), cpu_possible_mask, (wq)))
#ifdef CONFIG_DEBUG_OBJECTS_WORK
@@ -459,57 +425,69 @@
static bool workqueue_freezing; /* W: have wqs started freezing? */
/*
- * The almighty global cpu workqueues. nr_running is the only field
- * which is expected to be used frequently by other cpus via
- * try_to_wake_up(). Put it in a separate cacheline.
+ * The CPU and unbound standard worker pools. The unbound ones have
+ * POOL_DISASSOCIATED set, and their workers have WORKER_UNBOUND set.
*/
-static DEFINE_PER_CPU(struct global_cwq, global_cwq);
-static DEFINE_PER_CPU_SHARED_ALIGNED(atomic_t, pool_nr_running[NR_WORKER_POOLS]);
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct worker_pool [NR_STD_WORKER_POOLS],
+ cpu_std_worker_pools);
+static struct worker_pool unbound_std_worker_pools[NR_STD_WORKER_POOLS];
-/*
- * Global cpu workqueue and nr_running counter for unbound gcwq. The
- * gcwq is always online, has GCWQ_DISASSOCIATED set, and all its
- * workers have WORKER_UNBOUND set.
- */
-static struct global_cwq unbound_global_cwq;
-static atomic_t unbound_pool_nr_running[NR_WORKER_POOLS] = {
- [0 ... NR_WORKER_POOLS - 1] = ATOMIC_INIT(0), /* always 0 */
-};
+/* idr of all pools */
+static DEFINE_MUTEX(worker_pool_idr_mutex);
+static DEFINE_IDR(worker_pool_idr);
static int worker_thread(void *__worker);
-static int worker_pool_pri(struct worker_pool *pool)
-{
- return pool - pool->gcwq->pools;
-}
-
-static struct global_cwq *get_gcwq(unsigned int cpu)
+static struct worker_pool *std_worker_pools(int cpu)
{
if (cpu != WORK_CPU_UNBOUND)
- return &per_cpu(global_cwq, cpu);
+ return per_cpu(cpu_std_worker_pools, cpu);
else
- return &unbound_global_cwq;
+ return unbound_std_worker_pools;
}
-static atomic_t *get_pool_nr_running(struct worker_pool *pool)
+static int std_worker_pool_pri(struct worker_pool *pool)
{
- int cpu = pool->gcwq->cpu;
- int idx = worker_pool_pri(pool);
-
- if (cpu != WORK_CPU_UNBOUND)
- return &per_cpu(pool_nr_running, cpu)[idx];
- else
- return &unbound_pool_nr_running[idx];
+ return pool - std_worker_pools(pool->cpu);
}
-static struct cpu_workqueue_struct *get_cwq(unsigned int cpu,
- struct workqueue_struct *wq)
+/* allocate ID and assign it to @pool */
+static int worker_pool_assign_id(struct worker_pool *pool)
+{
+ int ret;
+
+ mutex_lock(&worker_pool_idr_mutex);
+ idr_pre_get(&worker_pool_idr, GFP_KERNEL);
+ ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
+ mutex_unlock(&worker_pool_idr_mutex);
+
+ return ret;
+}
+
+/*
+ * Lookup worker_pool by id. The idr currently is built during boot and
+ * never modified. Don't worry about locking for now.
+ */
+static struct worker_pool *worker_pool_by_id(int pool_id)
+{
+ return idr_find(&worker_pool_idr, pool_id);
+}
+
+static struct worker_pool *get_std_worker_pool(int cpu, bool highpri)
+{
+ struct worker_pool *pools = std_worker_pools(cpu);
+
+ return &pools[highpri];
+}
+
+static struct pool_workqueue *get_pwq(unsigned int cpu,
+ struct workqueue_struct *wq)
{
if (!(wq->flags & WQ_UNBOUND)) {
if (likely(cpu < nr_cpu_ids))
- return per_cpu_ptr(wq->cpu_wq.pcpu, cpu);
+ return per_cpu_ptr(wq->pool_wq.pcpu, cpu);
} else if (likely(cpu == WORK_CPU_UNBOUND))
- return wq->cpu_wq.single;
+ return wq->pool_wq.single;
return NULL;
}
@@ -530,19 +508,19 @@
}
/*
- * While queued, %WORK_STRUCT_CWQ is set and non flag bits of a work's data
- * contain the pointer to the queued cwq. Once execution starts, the flag
- * is cleared and the high bits contain OFFQ flags and CPU number.
+ * While queued, %WORK_STRUCT_PWQ is set and non flag bits of a work's data
+ * contain the pointer to the queued pwq. Once execution starts, the flag
+ * is cleared and the high bits contain OFFQ flags and pool ID.
*
- * set_work_cwq(), set_work_cpu_and_clear_pending(), mark_work_canceling()
- * and clear_work_data() can be used to set the cwq, cpu or clear
+ * set_work_pwq(), set_work_pool_and_clear_pending(), mark_work_canceling()
+ * and clear_work_data() can be used to set the pwq, pool or clear
* work->data. These functions should only be called while the work is
* owned - ie. while the PENDING bit is set.
*
- * get_work_[g]cwq() can be used to obtain the gcwq or cwq corresponding to
- * a work. gcwq is available once the work has been queued anywhere after
- * initialization until it is sync canceled. cwq is available only while
- * the work item is queued.
+ * get_work_pool() and get_work_pwq() can be used to obtain the pool or pwq
+ * corresponding to a work. Pool is available once the work has been
+ * queued anywhere after initialization until it is sync canceled. pwq is
+ * available only while the work item is queued.
*
* %WORK_OFFQ_CANCELING is used to mark a work item which is being
* canceled. While being canceled, a work item may have its PENDING set
@@ -556,16 +534,22 @@
atomic_long_set(&work->data, data | flags | work_static(work));
}
-static void set_work_cwq(struct work_struct *work,
- struct cpu_workqueue_struct *cwq,
+static void set_work_pwq(struct work_struct *work, struct pool_workqueue *pwq,
unsigned long extra_flags)
{
- set_work_data(work, (unsigned long)cwq,
- WORK_STRUCT_PENDING | WORK_STRUCT_CWQ | extra_flags);
+ set_work_data(work, (unsigned long)pwq,
+ WORK_STRUCT_PENDING | WORK_STRUCT_PWQ | extra_flags);
}
-static void set_work_cpu_and_clear_pending(struct work_struct *work,
- unsigned int cpu)
+static void set_work_pool_and_keep_pending(struct work_struct *work,
+ int pool_id)
+{
+ set_work_data(work, (unsigned long)pool_id << WORK_OFFQ_POOL_SHIFT,
+ WORK_STRUCT_PENDING);
+}
+
+static void set_work_pool_and_clear_pending(struct work_struct *work,
+ int pool_id)
{
/*
* The following wmb is paired with the implied mb in
@@ -574,67 +558,92 @@
* owner.
*/
smp_wmb();
- set_work_data(work, (unsigned long)cpu << WORK_OFFQ_CPU_SHIFT, 0);
+ set_work_data(work, (unsigned long)pool_id << WORK_OFFQ_POOL_SHIFT, 0);
}
static void clear_work_data(struct work_struct *work)
{
- smp_wmb(); /* see set_work_cpu_and_clear_pending() */
- set_work_data(work, WORK_STRUCT_NO_CPU, 0);
+ smp_wmb(); /* see set_work_pool_and_clear_pending() */
+ set_work_data(work, WORK_STRUCT_NO_POOL, 0);
}
-static struct cpu_workqueue_struct *get_work_cwq(struct work_struct *work)
+static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
- if (data & WORK_STRUCT_CWQ)
+ if (data & WORK_STRUCT_PWQ)
return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
else
return NULL;
}
-static struct global_cwq *get_work_gcwq(struct work_struct *work)
+/**
+ * get_work_pool - return the worker_pool a given work was associated with
+ * @work: the work item of interest
+ *
+ * Return the worker_pool @work was last associated with. %NULL if none.
+ */
+static struct worker_pool *get_work_pool(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
- unsigned int cpu;
+ struct worker_pool *pool;
+ int pool_id;
- if (data & WORK_STRUCT_CWQ)
- return ((struct cpu_workqueue_struct *)
- (data & WORK_STRUCT_WQ_DATA_MASK))->pool->gcwq;
+ if (data & WORK_STRUCT_PWQ)
+ return ((struct pool_workqueue *)
+ (data & WORK_STRUCT_WQ_DATA_MASK))->pool;
- cpu = data >> WORK_OFFQ_CPU_SHIFT;
- if (cpu == WORK_CPU_NONE)
+ pool_id = data >> WORK_OFFQ_POOL_SHIFT;
+ if (pool_id == WORK_OFFQ_POOL_NONE)
return NULL;
- BUG_ON(cpu >= nr_cpu_ids && cpu != WORK_CPU_UNBOUND);
- return get_gcwq(cpu);
+ pool = worker_pool_by_id(pool_id);
+ WARN_ON_ONCE(!pool);
+ return pool;
+}
+
+/**
+ * get_work_pool_id - return the worker pool ID a given work is associated with
+ * @work: the work item of interest
+ *
+ * Return the worker_pool ID @work was last associated with.
+ * %WORK_OFFQ_POOL_NONE if none.
+ */
+static int get_work_pool_id(struct work_struct *work)
+{
+ unsigned long data = atomic_long_read(&work->data);
+
+ if (data & WORK_STRUCT_PWQ)
+ return ((struct pool_workqueue *)
+ (data & WORK_STRUCT_WQ_DATA_MASK))->pool->id;
+
+ return data >> WORK_OFFQ_POOL_SHIFT;
}
static void mark_work_canceling(struct work_struct *work)
{
- struct global_cwq *gcwq = get_work_gcwq(work);
- unsigned long cpu = gcwq ? gcwq->cpu : WORK_CPU_NONE;
+ unsigned long pool_id = get_work_pool_id(work);
- set_work_data(work, (cpu << WORK_OFFQ_CPU_SHIFT) | WORK_OFFQ_CANCELING,
- WORK_STRUCT_PENDING);
+ pool_id <<= WORK_OFFQ_POOL_SHIFT;
+ set_work_data(work, pool_id | WORK_OFFQ_CANCELING, WORK_STRUCT_PENDING);
}
static bool work_is_canceling(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
- return !(data & WORK_STRUCT_CWQ) && (data & WORK_OFFQ_CANCELING);
+ return !(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_CANCELING);
}
/*
* Policy functions. These define the policies on how the global worker
* pools are managed. Unless noted otherwise, these functions assume that
- * they're being called with gcwq->lock held.
+ * they're being called with pool->lock held.
*/
static bool __need_more_worker(struct worker_pool *pool)
{
- return !atomic_read(get_pool_nr_running(pool));
+ return !atomic_read(&pool->nr_running);
}
/*
@@ -642,7 +651,7 @@
* running workers.
*
* Note that, because unbound workers never contribute to nr_running, this
- * function will always return %true for unbound gcwq as long as the
+ * function will always return %true for unbound pools as long as the
* worklist isn't empty.
*/
static bool need_more_worker(struct worker_pool *pool)
@@ -659,9 +668,8 @@
/* Do I need to keep working? Called from currently running workers. */
static bool keep_working(struct worker_pool *pool)
{
- atomic_t *nr_running = get_pool_nr_running(pool);
-
- return !list_empty(&pool->worklist) && atomic_read(nr_running) <= 1;
+ return !list_empty(&pool->worklist) &&
+ atomic_read(&pool->nr_running) <= 1;
}
/* Do we need a new worker? Called from manager. */
@@ -714,7 +722,7 @@
* Wake up the first idle worker of @pool.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
static void wake_up_worker(struct worker_pool *pool)
{
@@ -740,8 +748,8 @@
struct worker *worker = kthread_data(task);
if (!(worker->flags & WORKER_NOT_RUNNING)) {
- WARN_ON_ONCE(worker->pool->gcwq->cpu != cpu);
- atomic_inc(get_pool_nr_running(worker->pool));
+ WARN_ON_ONCE(worker->pool->cpu != cpu);
+ atomic_inc(&worker->pool->nr_running);
}
}
@@ -764,12 +772,18 @@
unsigned int cpu)
{
struct worker *worker = kthread_data(task), *to_wakeup = NULL;
- struct worker_pool *pool = worker->pool;
- atomic_t *nr_running = get_pool_nr_running(pool);
+ struct worker_pool *pool;
+ /*
+ * Rescuers, which may not have all the fields set up like normal
+ * workers, also reach here, let's not access anything before
+ * checking NOT_RUNNING.
+ */
if (worker->flags & WORKER_NOT_RUNNING)
return NULL;
+ pool = worker->pool;
+
/* this can only happen on the local cpu */
BUG_ON(cpu != raw_smp_processor_id());
@@ -781,10 +795,11 @@
* NOT_RUNNING is clear. This means that we're bound to and
* running on the local cpu w/ rq lock held and preemption
* disabled, which in turn means that none else could be
- * manipulating idle_list, so dereferencing idle_list without gcwq
+ * manipulating idle_list, so dereferencing idle_list without pool
* lock is safe.
*/
- if (atomic_dec_and_test(nr_running) && !list_empty(&pool->worklist))
+ if (atomic_dec_and_test(&pool->nr_running) &&
+ !list_empty(&pool->worklist))
to_wakeup = first_worker(pool);
return to_wakeup ? to_wakeup->task : NULL;
}
@@ -800,7 +815,7 @@
* woken up.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock)
+ * spin_lock_irq(pool->lock)
*/
static inline void worker_set_flags(struct worker *worker, unsigned int flags,
bool wakeup)
@@ -816,14 +831,12 @@
*/
if ((flags & WORKER_NOT_RUNNING) &&
!(worker->flags & WORKER_NOT_RUNNING)) {
- atomic_t *nr_running = get_pool_nr_running(pool);
-
if (wakeup) {
- if (atomic_dec_and_test(nr_running) &&
+ if (atomic_dec_and_test(&pool->nr_running) &&
!list_empty(&pool->worklist))
wake_up_worker(pool);
} else
- atomic_dec(nr_running);
+ atomic_dec(&pool->nr_running);
}
worker->flags |= flags;
@@ -837,7 +850,7 @@
* Clear @flags in @worker->flags and adjust nr_running accordingly.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock)
+ * spin_lock_irq(pool->lock)
*/
static inline void worker_clr_flags(struct worker *worker, unsigned int flags)
{
@@ -855,87 +868,56 @@
*/
if ((flags & WORKER_NOT_RUNNING) && (oflags & WORKER_NOT_RUNNING))
if (!(worker->flags & WORKER_NOT_RUNNING))
- atomic_inc(get_pool_nr_running(pool));
-}
-
-/**
- * busy_worker_head - return the busy hash head for a work
- * @gcwq: gcwq of interest
- * @work: work to be hashed
- *
- * Return hash head of @gcwq for @work.
- *
- * CONTEXT:
- * spin_lock_irq(gcwq->lock).
- *
- * RETURNS:
- * Pointer to the hash head.
- */
-static struct hlist_head *busy_worker_head(struct global_cwq *gcwq,
- struct work_struct *work)
-{
- const int base_shift = ilog2(sizeof(struct work_struct));
- unsigned long v = (unsigned long)work;
-
- /* simple shift and fold hash, do we need something better? */
- v >>= base_shift;
- v += v >> BUSY_WORKER_HASH_ORDER;
- v &= BUSY_WORKER_HASH_MASK;
-
- return &gcwq->busy_hash[v];
-}
-
-/**
- * __find_worker_executing_work - find worker which is executing a work
- * @gcwq: gcwq of interest
- * @bwh: hash head as returned by busy_worker_head()
- * @work: work to find worker for
- *
- * Find a worker which is executing @work on @gcwq. @bwh should be
- * the hash head obtained by calling busy_worker_head() with the same
- * work.
- *
- * CONTEXT:
- * spin_lock_irq(gcwq->lock).
- *
- * RETURNS:
- * Pointer to worker which is executing @work if found, NULL
- * otherwise.
- */
-static struct worker *__find_worker_executing_work(struct global_cwq *gcwq,
- struct hlist_head *bwh,
- struct work_struct *work)
-{
- struct worker *worker;
- struct hlist_node *tmp;
-
- hlist_for_each_entry(worker, tmp, bwh, hentry)
- if (worker->current_work == work)
- return worker;
- return NULL;
+ atomic_inc(&pool->nr_running);
}
/**
* find_worker_executing_work - find worker which is executing a work
- * @gcwq: gcwq of interest
+ * @pool: pool of interest
* @work: work to find worker for
*
- * Find a worker which is executing @work on @gcwq. This function is
- * identical to __find_worker_executing_work() except that this
- * function calculates @bwh itself.
+ * Find a worker which is executing @work on @pool by searching
+ * @pool->busy_hash which is keyed by the address of @work. For a worker
+ * to match, its current execution should match the address of @work and
+ * its work function. This is to avoid unwanted dependency between
+ * unrelated work executions through a work item being recycled while still
+ * being executed.
+ *
+ * This is a bit tricky. A work item may be freed once its execution
+ * starts and nothing prevents the freed area from being recycled for
+ * another work item. If the same work item address ends up being reused
+ * before the original execution finishes, workqueue will identify the
+ * recycled work item as currently executing and make it wait until the
+ * current execution finishes, introducing an unwanted dependency.
+ *
+ * This function checks the work item address, work function and workqueue
+ * to avoid false positives. Note that this isn't complete as one may
+ * construct a work function which can introduce dependency onto itself
+ * through a recycled work item. Well, if somebody wants to shoot oneself
+ * in the foot that badly, there's only so much we can do, and if such
+ * deadlock actually occurs, it should be easy to locate the culprit work
+ * function.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*
* RETURNS:
* Pointer to worker which is executing @work if found, NULL
* otherwise.
*/
-static struct worker *find_worker_executing_work(struct global_cwq *gcwq,
+static struct worker *find_worker_executing_work(struct worker_pool *pool,
struct work_struct *work)
{
- return __find_worker_executing_work(gcwq, busy_worker_head(gcwq, work),
- work);
+ struct worker *worker;
+ struct hlist_node *tmp;
+
+ hash_for_each_possible(pool->busy_hash, worker, tmp, hentry,
+ (unsigned long)work)
+ if (worker->current_work == work &&
+ worker->current_func == work->func)
+ return worker;
+
+ return NULL;
}
/**
@@ -953,7 +935,7 @@
* nested inside outer list_for_each_entry_safe().
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
static void move_linked_works(struct work_struct *work, struct list_head *head,
struct work_struct **nextp)
@@ -979,67 +961,67 @@
*nextp = n;
}
-static void cwq_activate_delayed_work(struct work_struct *work)
+static void pwq_activate_delayed_work(struct work_struct *work)
{
- struct cpu_workqueue_struct *cwq = get_work_cwq(work);
+ struct pool_workqueue *pwq = get_work_pwq(work);
trace_workqueue_activate_work(work);
- move_linked_works(work, &cwq->pool->worklist, NULL);
+ move_linked_works(work, &pwq->pool->worklist, NULL);
__clear_bit(WORK_STRUCT_DELAYED_BIT, work_data_bits(work));
- cwq->nr_active++;
+ pwq->nr_active++;
}
-static void cwq_activate_first_delayed(struct cpu_workqueue_struct *cwq)
+static void pwq_activate_first_delayed(struct pool_workqueue *pwq)
{
- struct work_struct *work = list_first_entry(&cwq->delayed_works,
+ struct work_struct *work = list_first_entry(&pwq->delayed_works,
struct work_struct, entry);
- cwq_activate_delayed_work(work);
+ pwq_activate_delayed_work(work);
}
/**
- * cwq_dec_nr_in_flight - decrement cwq's nr_in_flight
- * @cwq: cwq of interest
+ * pwq_dec_nr_in_flight - decrement pwq's nr_in_flight
+ * @pwq: pwq of interest
* @color: color of work which left the queue
*
* A work either has completed or is removed from pending queue,
- * decrement nr_in_flight of its cwq and handle workqueue flushing.
+ * decrement nr_in_flight of its pwq and handle workqueue flushing.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
-static void cwq_dec_nr_in_flight(struct cpu_workqueue_struct *cwq, int color)
+static void pwq_dec_nr_in_flight(struct pool_workqueue *pwq, int color)
{
/* ignore uncolored works */
if (color == WORK_NO_COLOR)
return;
- cwq->nr_in_flight[color]--;
+ pwq->nr_in_flight[color]--;
- cwq->nr_active--;
- if (!list_empty(&cwq->delayed_works)) {
+ pwq->nr_active--;
+ if (!list_empty(&pwq->delayed_works)) {
/* one down, submit a delayed one */
- if (cwq->nr_active < cwq->max_active)
- cwq_activate_first_delayed(cwq);
+ if (pwq->nr_active < pwq->max_active)
+ pwq_activate_first_delayed(pwq);
}
/* is flush in progress and are we at the flushing tip? */
- if (likely(cwq->flush_color != color))
+ if (likely(pwq->flush_color != color))
return;
/* are there still in-flight works? */
- if (cwq->nr_in_flight[color])
+ if (pwq->nr_in_flight[color])
return;
- /* this cwq is done, clear flush_color */
- cwq->flush_color = -1;
+ /* this pwq is done, clear flush_color */
+ pwq->flush_color = -1;
/*
- * If this was the last cwq, wake up the first flusher. It
+ * If this was the last pwq, wake up the first flusher. It
* will handle the rest.
*/
- if (atomic_dec_and_test(&cwq->wq->nr_cwqs_to_flush))
- complete(&cwq->wq->first_flusher->done);
+ if (atomic_dec_and_test(&pwq->wq->nr_pwqs_to_flush))
+ complete(&pwq->wq->first_flusher->done);
}
/**
@@ -1070,7 +1052,8 @@
static int try_to_grab_pending(struct work_struct *work, bool is_dwork,
unsigned long *flags)
{
- struct global_cwq *gcwq;
+ struct worker_pool *pool;
+ struct pool_workqueue *pwq;
local_irq_save(*flags);
@@ -1095,41 +1078,43 @@
* The queueing is in progress, or it is already queued. Try to
* steal it from ->worklist without clearing WORK_STRUCT_PENDING.
*/
- gcwq = get_work_gcwq(work);
- if (!gcwq)
+ pool = get_work_pool(work);
+ if (!pool)
goto fail;
- spin_lock(&gcwq->lock);
- if (!list_empty(&work->entry)) {
+ spin_lock(&pool->lock);
+ /*
+ * work->data is guaranteed to point to pwq only while the work
+ * item is queued on pwq->wq, and both updating work->data to point
+ * to pwq on queueing and to pool on dequeueing are done under
+ * pwq->pool->lock. This in turn guarantees that, if work->data
+ * points to pwq which is associated with a locked pool, the work
+ * item is currently queued on that pool.
+ */
+ pwq = get_work_pwq(work);
+ if (pwq && pwq->pool == pool) {
+ debug_work_deactivate(work);
+
/*
- * This work is queued, but perhaps we locked the wrong gcwq.
- * In that case we must see the new value after rmb(), see
- * insert_work()->wmb().
+ * A delayed work item cannot be grabbed directly because
+ * it might have linked NO_COLOR work items which, if left
+ * on the delayed_list, will confuse pwq->nr_active
+ * management later on and cause stall. Make sure the work
+ * item is activated before grabbing.
*/
- smp_rmb();
- if (gcwq == get_work_gcwq(work)) {
- debug_work_deactivate(work);
+ if (*work_data_bits(work) & WORK_STRUCT_DELAYED)
+ pwq_activate_delayed_work(work);
- /*
- * A delayed work item cannot be grabbed directly
- * because it might have linked NO_COLOR work items
- * which, if left on the delayed_list, will confuse
- * cwq->nr_active management later on and cause
- * stall. Make sure the work item is activated
- * before grabbing.
- */
- if (*work_data_bits(work) & WORK_STRUCT_DELAYED)
- cwq_activate_delayed_work(work);
+ list_del_init(&work->entry);
+ pwq_dec_nr_in_flight(get_work_pwq(work), get_work_color(work));
- list_del_init(&work->entry);
- cwq_dec_nr_in_flight(get_work_cwq(work),
- get_work_color(work));
+ /* work->data points to pwq iff queued, point to pool */
+ set_work_pool_and_keep_pending(work, pool->id);
- spin_unlock(&gcwq->lock);
- return 1;
- }
+ spin_unlock(&pool->lock);
+ return 1;
}
- spin_unlock(&gcwq->lock);
+ spin_unlock(&pool->lock);
fail:
local_irq_restore(*flags);
if (work_is_canceling(work))
@@ -1139,33 +1124,25 @@
}
/**
- * insert_work - insert a work into gcwq
- * @cwq: cwq @work belongs to
+ * insert_work - insert a work into a pool
+ * @pwq: pwq @work belongs to
* @work: work to insert
* @head: insertion point
* @extra_flags: extra WORK_STRUCT_* flags to set
*
- * Insert @work which belongs to @cwq into @gcwq after @head.
- * @extra_flags is or'd to work_struct flags.
+ * Insert @work which belongs to @pwq after @head. @extra_flags is or'd to
+ * work_struct flags.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
-static void insert_work(struct cpu_workqueue_struct *cwq,
- struct work_struct *work, struct list_head *head,
- unsigned int extra_flags)
+static void insert_work(struct pool_workqueue *pwq, struct work_struct *work,
+ struct list_head *head, unsigned int extra_flags)
{
- struct worker_pool *pool = cwq->pool;
+ struct worker_pool *pool = pwq->pool;
/* we own @work, set data and link */
- set_work_cwq(work, cwq, extra_flags);
-
- /*
- * Ensure that we get the right work->data if we see the
- * result of list_add() below, see try_to_grab_pending().
- */
- smp_wmb();
-
+ set_work_pwq(work, pwq, extra_flags);
list_add_tail(&work->entry, head);
/*
@@ -1181,41 +1158,24 @@
/*
* Test whether @work is being queued from another work executing on the
- * same workqueue. This is rather expensive and should only be used from
- * cold paths.
+ * same workqueue.
*/
static bool is_chained_work(struct workqueue_struct *wq)
{
- unsigned long flags;
- unsigned int cpu;
+ struct worker *worker;
- for_each_gcwq_cpu(cpu) {
- struct global_cwq *gcwq = get_gcwq(cpu);
- struct worker *worker;
- struct hlist_node *pos;
- int i;
-
- spin_lock_irqsave(&gcwq->lock, flags);
- for_each_busy_worker(worker, i, pos, gcwq) {
- if (worker->task != current)
- continue;
- spin_unlock_irqrestore(&gcwq->lock, flags);
- /*
- * I'm @worker, no locking necessary. See if @work
- * is headed to the same workqueue.
- */
- return worker->current_cwq->wq == wq;
- }
- spin_unlock_irqrestore(&gcwq->lock, flags);
- }
- return false;
+ worker = current_wq_worker();
+ /*
+ * Return %true iff I'm a worker execuing a work item on @wq. If
+ * I'm @worker, it's safe to dereference it without locking.
+ */
+ return worker && worker->current_pwq->wq == wq;
}
static void __queue_work(unsigned int cpu, struct workqueue_struct *wq,
struct work_struct *work)
{
- struct global_cwq *gcwq;
- struct cpu_workqueue_struct *cwq;
+ struct pool_workqueue *pwq;
struct list_head *worklist;
unsigned int work_flags;
unsigned int req_cpu = cpu;
@@ -1235,9 +1195,9 @@
WARN_ON_ONCE(!is_chained_work(wq)))
return;
- /* determine gcwq to use */
+ /* determine the pwq to use */
if (!(wq->flags & WQ_UNBOUND)) {
- struct global_cwq *last_gcwq;
+ struct worker_pool *last_pool;
if (cpu == WORK_CPU_UNBOUND)
cpu = raw_smp_processor_id();
@@ -1248,55 +1208,54 @@
* work needs to be queued on that cpu to guarantee
* non-reentrancy.
*/
- gcwq = get_gcwq(cpu);
- last_gcwq = get_work_gcwq(work);
+ pwq = get_pwq(cpu, wq);
+ last_pool = get_work_pool(work);
- if (last_gcwq && last_gcwq != gcwq) {
+ if (last_pool && last_pool != pwq->pool) {
struct worker *worker;
- spin_lock(&last_gcwq->lock);
+ spin_lock(&last_pool->lock);
- worker = find_worker_executing_work(last_gcwq, work);
+ worker = find_worker_executing_work(last_pool, work);
- if (worker && worker->current_cwq->wq == wq)
- gcwq = last_gcwq;
- else {
+ if (worker && worker->current_pwq->wq == wq) {
+ pwq = get_pwq(last_pool->cpu, wq);
+ } else {
/* meh... not running there, queue here */
- spin_unlock(&last_gcwq->lock);
- spin_lock(&gcwq->lock);
+ spin_unlock(&last_pool->lock);
+ spin_lock(&pwq->pool->lock);
}
} else {
- spin_lock(&gcwq->lock);
+ spin_lock(&pwq->pool->lock);
}
} else {
- gcwq = get_gcwq(WORK_CPU_UNBOUND);
- spin_lock(&gcwq->lock);
+ pwq = get_pwq(WORK_CPU_UNBOUND, wq);
+ spin_lock(&pwq->pool->lock);
}
- /* gcwq determined, get cwq and queue */
- cwq = get_cwq(gcwq->cpu, wq);
- trace_workqueue_queue_work(req_cpu, cwq, work);
+ /* pwq determined, queue */
+ trace_workqueue_queue_work(req_cpu, pwq, work);
if (WARN_ON(!list_empty(&work->entry))) {
- spin_unlock(&gcwq->lock);
+ spin_unlock(&pwq->pool->lock);
return;
}
- cwq->nr_in_flight[cwq->work_color]++;
- work_flags = work_color_to_flags(cwq->work_color);
+ pwq->nr_in_flight[pwq->work_color]++;
+ work_flags = work_color_to_flags(pwq->work_color);
- if (likely(cwq->nr_active < cwq->max_active)) {
+ if (likely(pwq->nr_active < pwq->max_active)) {
trace_workqueue_activate_work(work);
- cwq->nr_active++;
- worklist = &cwq->pool->worklist;
+ pwq->nr_active++;
+ worklist = &pwq->pool->worklist;
} else {
work_flags |= WORK_STRUCT_DELAYED;
- worklist = &cwq->delayed_works;
+ worklist = &pwq->delayed_works;
}
- insert_work(cwq, work, worklist, work_flags);
+ insert_work(pwq, work, worklist, work_flags);
- spin_unlock(&gcwq->lock);
+ spin_unlock(&pwq->pool->lock);
}
/**
@@ -1347,19 +1306,17 @@
void delayed_work_timer_fn(unsigned long __data)
{
struct delayed_work *dwork = (struct delayed_work *)__data;
- struct cpu_workqueue_struct *cwq = get_work_cwq(&dwork->work);
/* should have been called from irqsafe timer with irq already off */
- __queue_work(dwork->cpu, cwq->wq, &dwork->work);
+ __queue_work(dwork->cpu, dwork->wq, &dwork->work);
}
-EXPORT_SYMBOL_GPL(delayed_work_timer_fn);
+EXPORT_SYMBOL(delayed_work_timer_fn);
static void __queue_delayed_work(int cpu, struct workqueue_struct *wq,
struct delayed_work *dwork, unsigned long delay)
{
struct timer_list *timer = &dwork->timer;
struct work_struct *work = &dwork->work;
- unsigned int lcpu;
WARN_ON_ONCE(timer->function != delayed_work_timer_fn ||
timer->data != (unsigned long)dwork);
@@ -1379,30 +1336,7 @@
timer_stats_timer_set_start_info(&dwork->timer);
- /*
- * This stores cwq for the moment, for the timer_fn. Note that the
- * work's gcwq is preserved to allow reentrance detection for
- * delayed works.
- */
- if (!(wq->flags & WQ_UNBOUND)) {
- struct global_cwq *gcwq = get_work_gcwq(work);
-
- /*
- * If we cannot get the last gcwq from @work directly,
- * select the last CPU such that it avoids unnecessarily
- * triggering non-reentrancy check in __queue_work().
- */
- lcpu = cpu;
- if (gcwq)
- lcpu = gcwq->cpu;
- if (lcpu == WORK_CPU_UNBOUND)
- lcpu = raw_smp_processor_id();
- } else {
- lcpu = WORK_CPU_UNBOUND;
- }
-
- set_work_cwq(work, get_cwq(lcpu, wq), 0);
-
+ dwork->wq = wq;
dwork->cpu = cpu;
timer->expires = jiffies + delay;
@@ -1519,12 +1453,11 @@
* necessary.
*
* LOCKING:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
static void worker_enter_idle(struct worker *worker)
{
struct worker_pool *pool = worker->pool;
- struct global_cwq *gcwq = pool->gcwq;
BUG_ON(worker->flags & WORKER_IDLE);
BUG_ON(!list_empty(&worker->entry) &&
@@ -1542,14 +1475,14 @@
mod_timer(&pool->idle_timer, jiffies + IDLE_WORKER_TIMEOUT);
/*
- * Sanity check nr_running. Because gcwq_unbind_fn() releases
- * gcwq->lock between setting %WORKER_UNBOUND and zapping
+ * Sanity check nr_running. Because wq_unbind_fn() releases
+ * pool->lock between setting %WORKER_UNBOUND and zapping
* nr_running, the warning may trigger spuriously. Check iff
* unbind is not in progress.
*/
- WARN_ON_ONCE(!(gcwq->flags & GCWQ_DISASSOCIATED) &&
+ WARN_ON_ONCE(!(pool->flags & POOL_DISASSOCIATED) &&
pool->nr_workers == pool->nr_idle &&
- atomic_read(get_pool_nr_running(pool)));
+ atomic_read(&pool->nr_running));
}
/**
@@ -1559,7 +1492,7 @@
* @worker is leaving idle state. Update stats.
*
* LOCKING:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
static void worker_leave_idle(struct worker *worker)
{
@@ -1572,7 +1505,7 @@
}
/**
- * worker_maybe_bind_and_lock - bind worker to its cpu if possible and lock gcwq
+ * worker_maybe_bind_and_lock - bind worker to its cpu if possible and lock pool
* @worker: self
*
* Works which are scheduled while the cpu is online must at least be
@@ -1584,27 +1517,27 @@
* themselves to the target cpu and may race with cpu going down or
* coming online. kthread_bind() can't be used because it may put the
* worker to already dead cpu and set_cpus_allowed_ptr() can't be used
- * verbatim as it's best effort and blocking and gcwq may be
+ * verbatim as it's best effort and blocking and pool may be
* [dis]associated in the meantime.
*
- * This function tries set_cpus_allowed() and locks gcwq and verifies the
- * binding against %GCWQ_DISASSOCIATED which is set during
+ * This function tries set_cpus_allowed() and locks pool and verifies the
+ * binding against %POOL_DISASSOCIATED which is set during
* %CPU_DOWN_PREPARE and cleared during %CPU_ONLINE, so if the worker
* enters idle state or fetches works without dropping lock, it can
* guarantee the scheduling requirement described in the first paragraph.
*
* CONTEXT:
- * Might sleep. Called without any lock but returns with gcwq->lock
+ * Might sleep. Called without any lock but returns with pool->lock
* held.
*
* RETURNS:
- * %true if the associated gcwq is online (@worker is successfully
+ * %true if the associated pool is online (@worker is successfully
* bound), %false if offline.
*/
static bool worker_maybe_bind_and_lock(struct worker *worker)
-__acquires(&gcwq->lock)
+__acquires(&pool->lock)
{
- struct global_cwq *gcwq = worker->pool->gcwq;
+ struct worker_pool *pool = worker->pool;
struct task_struct *task = worker->task;
while (true) {
@@ -1612,19 +1545,19 @@
* The following call may fail, succeed or succeed
* without actually migrating the task to the cpu if
* it races with cpu hotunplug operation. Verify
- * against GCWQ_DISASSOCIATED.
+ * against POOL_DISASSOCIATED.
*/
- if (!(gcwq->flags & GCWQ_DISASSOCIATED))
- set_cpus_allowed_ptr(task, get_cpu_mask(gcwq->cpu));
+ if (!(pool->flags & POOL_DISASSOCIATED))
+ set_cpus_allowed_ptr(task, get_cpu_mask(pool->cpu));
- spin_lock_irq(&gcwq->lock);
- if (gcwq->flags & GCWQ_DISASSOCIATED)
+ spin_lock_irq(&pool->lock);
+ if (pool->flags & POOL_DISASSOCIATED)
return false;
- if (task_cpu(task) == gcwq->cpu &&
+ if (task_cpu(task) == pool->cpu &&
cpumask_equal(¤t->cpus_allowed,
- get_cpu_mask(gcwq->cpu)))
+ get_cpu_mask(pool->cpu)))
return true;
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
/*
* We've raced with CPU hot[un]plug. Give it a breather
@@ -1643,15 +1576,13 @@
*/
static void idle_worker_rebind(struct worker *worker)
{
- struct global_cwq *gcwq = worker->pool->gcwq;
-
/* CPU may go down again inbetween, clear UNBOUND only on success */
if (worker_maybe_bind_and_lock(worker))
worker_clr_flags(worker, WORKER_UNBOUND);
/* rebind complete, become available again */
list_add(&worker->entry, &worker->pool->idle_list);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&worker->pool->lock);
}
/*
@@ -1663,19 +1594,18 @@
static void busy_worker_rebind_fn(struct work_struct *work)
{
struct worker *worker = container_of(work, struct worker, rebind_work);
- struct global_cwq *gcwq = worker->pool->gcwq;
if (worker_maybe_bind_and_lock(worker))
worker_clr_flags(worker, WORKER_UNBOUND);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&worker->pool->lock);
}
/**
- * rebind_workers - rebind all workers of a gcwq to the associated CPU
- * @gcwq: gcwq of interest
+ * rebind_workers - rebind all workers of a pool to the associated CPU
+ * @pool: pool of interest
*
- * @gcwq->cpu is coming online. Rebind all workers to the CPU. Rebinding
+ * @pool->cpu is coming online. Rebind all workers to the CPU. Rebinding
* is different for idle and busy ones.
*
* Idle ones will be removed from the idle_list and woken up. They will
@@ -1693,38 +1623,32 @@
* including the manager will not appear on @idle_list until rebind is
* complete, making local wake-ups safe.
*/
-static void rebind_workers(struct global_cwq *gcwq)
+static void rebind_workers(struct worker_pool *pool)
{
- struct worker_pool *pool;
struct worker *worker, *n;
struct hlist_node *pos;
int i;
- lockdep_assert_held(&gcwq->lock);
-
- for_each_worker_pool(pool, gcwq)
- lockdep_assert_held(&pool->assoc_mutex);
+ lockdep_assert_held(&pool->assoc_mutex);
+ lockdep_assert_held(&pool->lock);
/* dequeue and kick idle ones */
- for_each_worker_pool(pool, gcwq) {
- list_for_each_entry_safe(worker, n, &pool->idle_list, entry) {
- /*
- * idle workers should be off @pool->idle_list
- * until rebind is complete to avoid receiving
- * premature local wake-ups.
- */
- list_del_init(&worker->entry);
+ list_for_each_entry_safe(worker, n, &pool->idle_list, entry) {
+ /*
+ * idle workers should be off @pool->idle_list until rebind
+ * is complete to avoid receiving premature local wake-ups.
+ */
+ list_del_init(&worker->entry);
- /*
- * worker_thread() will see the above dequeuing
- * and call idle_worker_rebind().
- */
- wake_up_process(worker->task);
- }
+ /*
+ * worker_thread() will see the above dequeuing and call
+ * idle_worker_rebind().
+ */
+ wake_up_process(worker->task);
}
/* rebind busy workers */
- for_each_busy_worker(worker, i, pos, gcwq) {
+ for_each_busy_worker(worker, i, pos, pool) {
struct work_struct *rebind_work = &worker->rebind_work;
struct workqueue_struct *wq;
@@ -1736,16 +1660,16 @@
/*
* wq doesn't really matter but let's keep @worker->pool
- * and @cwq->pool consistent for sanity.
+ * and @pwq->pool consistent for sanity.
*/
- if (worker_pool_pri(worker->pool))
+ if (std_worker_pool_pri(worker->pool))
wq = system_highpri_wq;
else
wq = system_wq;
- insert_work(get_cwq(gcwq->cpu, wq), rebind_work,
- worker->scheduled.next,
- work_color_to_flags(WORK_NO_COLOR));
+ insert_work(get_pwq(pool->cpu, wq), rebind_work,
+ worker->scheduled.next,
+ work_color_to_flags(WORK_NO_COLOR));
}
}
@@ -1780,19 +1704,18 @@
*/
static struct worker *create_worker(struct worker_pool *pool)
{
- struct global_cwq *gcwq = pool->gcwq;
- const char *pri = worker_pool_pri(pool) ? "H" : "";
+ const char *pri = std_worker_pool_pri(pool) ? "H" : "";
struct worker *worker = NULL;
int id = -1;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
while (ida_get_new(&pool->worker_ida, &id)) {
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
if (!ida_pre_get(&pool->worker_ida, GFP_KERNEL))
goto fail;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
}
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
worker = alloc_worker();
if (!worker)
@@ -1801,30 +1724,30 @@
worker->pool = pool;
worker->id = id;
- if (gcwq->cpu != WORK_CPU_UNBOUND)
+ if (pool->cpu != WORK_CPU_UNBOUND)
worker->task = kthread_create_on_node(worker_thread,
- worker, cpu_to_node(gcwq->cpu),
- "kworker/%u:%d%s", gcwq->cpu, id, pri);
+ worker, cpu_to_node(pool->cpu),
+ "kworker/%u:%d%s", pool->cpu, id, pri);
else
worker->task = kthread_create(worker_thread, worker,
"kworker/u:%d%s", id, pri);
if (IS_ERR(worker->task))
goto fail;
- if (worker_pool_pri(pool))
+ if (std_worker_pool_pri(pool))
set_user_nice(worker->task, HIGHPRI_NICE_LEVEL);
/*
* Determine CPU binding of the new worker depending on
- * %GCWQ_DISASSOCIATED. The caller is responsible for ensuring the
+ * %POOL_DISASSOCIATED. The caller is responsible for ensuring the
* flag remains stable across this function. See the comments
* above the flag definition for details.
*
* As an unbound worker may later become a regular one if CPU comes
* online, make sure every worker has %PF_THREAD_BOUND set.
*/
- if (!(gcwq->flags & GCWQ_DISASSOCIATED)) {
- kthread_bind(worker->task, gcwq->cpu);
+ if (!(pool->flags & POOL_DISASSOCIATED)) {
+ kthread_bind(worker->task, pool->cpu);
} else {
worker->task->flags |= PF_THREAD_BOUND;
worker->flags |= WORKER_UNBOUND;
@@ -1833,9 +1756,9 @@
return worker;
fail:
if (id >= 0) {
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
ida_remove(&pool->worker_ida, id);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
kfree(worker);
return NULL;
@@ -1845,10 +1768,10 @@
* start_worker - start a newly created worker
* @worker: worker to start
*
- * Make the gcwq aware of @worker and start it.
+ * Make the pool aware of @worker and start it.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
static void start_worker(struct worker *worker)
{
@@ -1862,15 +1785,14 @@
* destroy_worker - destroy a workqueue worker
* @worker: worker to be destroyed
*
- * Destroy @worker and adjust @gcwq stats accordingly.
+ * Destroy @worker and adjust @pool stats accordingly.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock) which is released and regrabbed.
+ * spin_lock_irq(pool->lock) which is released and regrabbed.
*/
static void destroy_worker(struct worker *worker)
{
struct worker_pool *pool = worker->pool;
- struct global_cwq *gcwq = pool->gcwq;
int id = worker->id;
/* sanity check frenzy */
@@ -1885,21 +1807,20 @@
list_del_init(&worker->entry);
worker->flags |= WORKER_DIE;
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
kthread_stop(worker->task);
kfree(worker);
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
ida_remove(&pool->worker_ida, id);
}
static void idle_worker_timeout(unsigned long __pool)
{
struct worker_pool *pool = (void *)__pool;
- struct global_cwq *gcwq = pool->gcwq;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
if (too_many_workers(pool)) {
struct worker *worker;
@@ -1918,20 +1839,20 @@
}
}
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
static bool send_mayday(struct work_struct *work)
{
- struct cpu_workqueue_struct *cwq = get_work_cwq(work);
- struct workqueue_struct *wq = cwq->wq;
+ struct pool_workqueue *pwq = get_work_pwq(work);
+ struct workqueue_struct *wq = pwq->wq;
unsigned int cpu;
if (!(wq->flags & WQ_RESCUER))
return false;
/* mayday mayday mayday */
- cpu = cwq->pool->gcwq->cpu;
+ cpu = pwq->pool->cpu;
/* WORK_CPU_UNBOUND can't be set in cpumask, use cpu 0 instead */
if (cpu == WORK_CPU_UNBOUND)
cpu = 0;
@@ -1940,13 +1861,12 @@
return true;
}
-static void gcwq_mayday_timeout(unsigned long __pool)
+static void pool_mayday_timeout(unsigned long __pool)
{
struct worker_pool *pool = (void *)__pool;
- struct global_cwq *gcwq = pool->gcwq;
struct work_struct *work;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
if (need_to_create_worker(pool)) {
/*
@@ -1959,7 +1879,7 @@
send_mayday(work);
}
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
mod_timer(&pool->mayday_timer, jiffies + MAYDAY_INTERVAL);
}
@@ -1978,24 +1898,22 @@
* may_start_working() true.
*
* LOCKING:
- * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * spin_lock_irq(pool->lock) which may be released and regrabbed
* multiple times. Does GFP_KERNEL allocations. Called only from
* manager.
*
* RETURNS:
- * false if no action was taken and gcwq->lock stayed locked, true
+ * false if no action was taken and pool->lock stayed locked, true
* otherwise.
*/
static bool maybe_create_worker(struct worker_pool *pool)
-__releases(&gcwq->lock)
-__acquires(&gcwq->lock)
+__releases(&pool->lock)
+__acquires(&pool->lock)
{
- struct global_cwq *gcwq = pool->gcwq;
-
if (!need_to_create_worker(pool))
return false;
restart:
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
/* if we don't make progress in MAYDAY_INITIAL_TIMEOUT, call for help */
mod_timer(&pool->mayday_timer, jiffies + MAYDAY_INITIAL_TIMEOUT);
@@ -2006,7 +1924,7 @@
worker = create_worker(pool);
if (worker) {
del_timer_sync(&pool->mayday_timer);
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
start_worker(worker);
BUG_ON(need_to_create_worker(pool));
return true;
@@ -2023,7 +1941,7 @@
}
del_timer_sync(&pool->mayday_timer);
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
if (need_to_create_worker(pool))
goto restart;
return true;
@@ -2037,11 +1955,11 @@
* IDLE_WORKER_TIMEOUT.
*
* LOCKING:
- * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * spin_lock_irq(pool->lock) which may be released and regrabbed
* multiple times. Called only from manager.
*
* RETURNS:
- * false if no action was taken and gcwq->lock stayed locked, true
+ * false if no action was taken and pool->lock stayed locked, true
* otherwise.
*/
static bool maybe_destroy_workers(struct worker_pool *pool)
@@ -2071,21 +1989,21 @@
* manage_workers - manage worker pool
* @worker: self
*
- * Assume the manager role and manage gcwq worker pool @worker belongs
+ * Assume the manager role and manage the worker pool @worker belongs
* to. At any given time, there can be only zero or one manager per
- * gcwq. The exclusion is handled automatically by this function.
+ * pool. The exclusion is handled automatically by this function.
*
* The caller can safely start processing works on false return. On
* true return, it's guaranteed that need_to_create_worker() is false
* and may_start_working() is true.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * spin_lock_irq(pool->lock) which may be released and regrabbed
* multiple times. Does GFP_KERNEL allocations.
*
* RETURNS:
- * false if no action was taken and gcwq->lock stayed locked, true if
- * some action was taken.
+ * spin_lock_irq(pool->lock) which may be released and regrabbed
+ * multiple times. Does GFP_KERNEL allocations.
*/
static bool manage_workers(struct worker *worker)
{
@@ -2107,20 +2025,20 @@
* manager against CPU hotplug.
*
* assoc_mutex would always be free unless CPU hotplug is in
- * progress. trylock first without dropping @gcwq->lock.
+ * progress. trylock first without dropping @pool->lock.
*/
if (unlikely(!mutex_trylock(&pool->assoc_mutex))) {
- spin_unlock_irq(&pool->gcwq->lock);
+ spin_unlock_irq(&pool->lock);
mutex_lock(&pool->assoc_mutex);
/*
* CPU hotplug could have happened while we were waiting
* for assoc_mutex. Hotplug itself can't handle us
* because manager isn't either on idle or busy list, and
- * @gcwq's state and ours could have deviated.
+ * @pool's state and ours could have deviated.
*
* As hotplug is now excluded via assoc_mutex, we can
* simply try to bind. It will succeed or fail depending
- * on @gcwq's current state. Try it and adjust
+ * on @pool's current state. Try it and adjust
* %WORKER_UNBOUND accordingly.
*/
if (worker_maybe_bind_and_lock(worker))
@@ -2157,18 +2075,15 @@
* call this function to process a work.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock) which is released and regrabbed.
+ * spin_lock_irq(pool->lock) which is released and regrabbed.
*/
static void process_one_work(struct worker *worker, struct work_struct *work)
-__releases(&gcwq->lock)
-__acquires(&gcwq->lock)
+__releases(&pool->lock)
+__acquires(&pool->lock)
{
- struct cpu_workqueue_struct *cwq = get_work_cwq(work);
+ struct pool_workqueue *pwq = get_work_pwq(work);
struct worker_pool *pool = worker->pool;
- struct global_cwq *gcwq = pool->gcwq;
- struct hlist_head *bwh = busy_worker_head(gcwq, work);
- bool cpu_intensive = cwq->wq->flags & WQ_CPU_INTENSIVE;
- work_func_t f = work->func;
+ bool cpu_intensive = pwq->wq->flags & WQ_CPU_INTENSIVE;
int work_color;
struct worker *collision;
#ifdef CONFIG_LOCKDEP
@@ -2186,11 +2101,11 @@
/*
* Ensure we're on the correct CPU. DISASSOCIATED test is
* necessary to avoid spurious warnings from rescuers servicing the
- * unbound or a disassociated gcwq.
+ * unbound or a disassociated pool.
*/
WARN_ON_ONCE(!(worker->flags & WORKER_UNBOUND) &&
- !(gcwq->flags & GCWQ_DISASSOCIATED) &&
- raw_smp_processor_id() != gcwq->cpu);
+ !(pool->flags & POOL_DISASSOCIATED) &&
+ raw_smp_processor_id() != pool->cpu);
/*
* A single work shouldn't be executed concurrently by
@@ -2198,7 +2113,7 @@
* already processing the work. If so, defer the work to the
* currently executing one.
*/
- collision = __find_worker_executing_work(gcwq, bwh, work);
+ collision = find_worker_executing_work(pool, work);
if (unlikely(collision)) {
move_linked_works(work, &collision->scheduled, NULL);
return;
@@ -2206,9 +2121,10 @@
/* claim and dequeue */
debug_work_deactivate(work);
- hlist_add_head(&worker->hentry, bwh);
+ hash_add(pool->busy_hash, &worker->hentry, (unsigned long)work);
worker->current_work = work;
- worker->current_cwq = cwq;
+ worker->current_func = work->func;
+ worker->current_pwq = pwq;
work_color = get_work_color(work);
list_del_init(&work->entry);
@@ -2221,53 +2137,55 @@
worker_set_flags(worker, WORKER_CPU_INTENSIVE, true);
/*
- * Unbound gcwq isn't concurrency managed and work items should be
+ * Unbound pool isn't concurrency managed and work items should be
* executed ASAP. Wake up another worker if necessary.
*/
if ((worker->flags & WORKER_UNBOUND) && need_more_worker(pool))
wake_up_worker(pool);
/*
- * Record the last CPU and clear PENDING which should be the last
- * update to @work. Also, do this inside @gcwq->lock so that
+ * Record the last pool and clear PENDING which should be the last
+ * update to @work. Also, do this inside @pool->lock so that
* PENDING and queued state changes happen together while IRQ is
* disabled.
*/
- set_work_cpu_and_clear_pending(work, gcwq->cpu);
+ set_work_pool_and_clear_pending(work, pool->id);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
- lock_map_acquire_read(&cwq->wq->lockdep_map);
+ lock_map_acquire_read(&pwq->wq->lockdep_map);
lock_map_acquire(&lockdep_map);
trace_workqueue_execute_start(work);
- f(work);
+ worker->current_func(work);
/*
* While we must be careful to not use "work" after this, the trace
* point will only record its address.
*/
trace_workqueue_execute_end(work);
lock_map_release(&lockdep_map);
- lock_map_release(&cwq->wq->lockdep_map);
+ lock_map_release(&pwq->wq->lockdep_map);
if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
pr_err("BUG: workqueue leaked lock or atomic: %s/0x%08x/%d\n"
" last function: %pf\n",
- current->comm, preempt_count(), task_pid_nr(current), f);
+ current->comm, preempt_count(), task_pid_nr(current),
+ worker->current_func);
debug_show_held_locks(current);
dump_stack();
}
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
/* clear cpu intensive status */
if (unlikely(cpu_intensive))
worker_clr_flags(worker, WORKER_CPU_INTENSIVE);
/* we're done with it, release */
- hlist_del_init(&worker->hentry);
+ hash_del(&worker->hentry);
worker->current_work = NULL;
- worker->current_cwq = NULL;
- cwq_dec_nr_in_flight(cwq, work_color);
+ worker->current_func = NULL;
+ worker->current_pwq = NULL;
+ pwq_dec_nr_in_flight(pwq, work_color);
}
/**
@@ -2279,7 +2197,7 @@
* fetches a work from the top and executes it.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * spin_lock_irq(pool->lock) which may be released and regrabbed
* multiple times.
*/
static void process_scheduled_works(struct worker *worker)
@@ -2295,8 +2213,8 @@
* worker_thread - the worker thread function
* @__worker: self
*
- * The gcwq worker thread function. There's a single dynamic pool of
- * these per each cpu. These workers process all works regardless of
+ * The worker thread function. There are NR_CPU_WORKER_POOLS dynamic pools
+ * of these per each cpu. These workers process all works regardless of
* their specific target workqueue. The only exception is works which
* belong to workqueues with a rescuer which will be explained in
* rescuer_thread().
@@ -2305,16 +2223,15 @@
{
struct worker *worker = __worker;
struct worker_pool *pool = worker->pool;
- struct global_cwq *gcwq = pool->gcwq;
/* tell the scheduler that this is a workqueue worker */
worker->task->flags |= PF_WQ_WORKER;
woke_up:
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
/* we are off idle list if destruction or rebind is requested */
if (unlikely(list_empty(&worker->entry))) {
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
/* if DIE is set, destruction is requested */
if (worker->flags & WORKER_DIE) {
@@ -2373,52 +2290,59 @@
goto recheck;
/*
- * gcwq->lock is held and there's no work to process and no
- * need to manage, sleep. Workers are woken up only while
- * holding gcwq->lock or from local cpu, so setting the
- * current state before releasing gcwq->lock is enough to
- * prevent losing any event.
+ * pool->lock is held and there's no work to process and no need to
+ * manage, sleep. Workers are woken up only while holding
+ * pool->lock or from local cpu, so setting the current state
+ * before releasing pool->lock is enough to prevent losing any
+ * event.
*/
worker_enter_idle(worker);
__set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
schedule();
goto woke_up;
}
/**
* rescuer_thread - the rescuer thread function
- * @__wq: the associated workqueue
+ * @__rescuer: self
*
* Workqueue rescuer thread function. There's one rescuer for each
* workqueue which has WQ_RESCUER set.
*
- * Regular work processing on a gcwq may block trying to create a new
+ * Regular work processing on a pool may block trying to create a new
* worker which uses GFP_KERNEL allocation which has slight chance of
* developing into deadlock if some works currently on the same queue
* need to be processed to satisfy the GFP_KERNEL allocation. This is
* the problem rescuer solves.
*
- * When such condition is possible, the gcwq summons rescuers of all
- * workqueues which have works queued on the gcwq and let them process
+ * When such condition is possible, the pool summons rescuers of all
+ * workqueues which have works queued on the pool and let them process
* those works so that forward progress can be guaranteed.
*
* This should happen rarely.
*/
-static int rescuer_thread(void *__wq)
+static int rescuer_thread(void *__rescuer)
{
- struct workqueue_struct *wq = __wq;
- struct worker *rescuer = wq->rescuer;
+ struct worker *rescuer = __rescuer;
+ struct workqueue_struct *wq = rescuer->rescue_wq;
struct list_head *scheduled = &rescuer->scheduled;
bool is_unbound = wq->flags & WQ_UNBOUND;
unsigned int cpu;
set_user_nice(current, RESCUER_NICE_LEVEL);
+
+ /*
+ * Mark rescuer as worker too. As WORKER_PREP is never cleared, it
+ * doesn't participate in concurrency management.
+ */
+ rescuer->task->flags |= PF_WQ_WORKER;
repeat:
set_current_state(TASK_INTERRUPTIBLE);
if (kthread_should_stop()) {
__set_current_state(TASK_RUNNING);
+ rescuer->task->flags &= ~PF_WQ_WORKER;
return 0;
}
@@ -2428,9 +2352,8 @@
*/
for_each_mayday_cpu(cpu, wq->mayday_mask) {
unsigned int tcpu = is_unbound ? WORK_CPU_UNBOUND : cpu;
- struct cpu_workqueue_struct *cwq = get_cwq(tcpu, wq);
- struct worker_pool *pool = cwq->pool;
- struct global_cwq *gcwq = pool->gcwq;
+ struct pool_workqueue *pwq = get_pwq(tcpu, wq);
+ struct worker_pool *pool = pwq->pool;
struct work_struct *work, *n;
__set_current_state(TASK_RUNNING);
@@ -2446,22 +2369,24 @@
*/
BUG_ON(!list_empty(&rescuer->scheduled));
list_for_each_entry_safe(work, n, &pool->worklist, entry)
- if (get_work_cwq(work) == cwq)
+ if (get_work_pwq(work) == pwq)
move_linked_works(work, scheduled, &n);
process_scheduled_works(rescuer);
/*
- * Leave this gcwq. If keep_working() is %true, notify a
+ * Leave this pool. If keep_working() is %true, notify a
* regular worker; otherwise, we end up with 0 concurrency
* and stalling the execution.
*/
if (keep_working(pool))
wake_up_worker(pool);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
+ /* rescuers should never participate in concurrency management */
+ WARN_ON_ONCE(!(rescuer->flags & WORKER_NOT_RUNNING));
schedule();
goto repeat;
}
@@ -2479,7 +2404,7 @@
/**
* insert_wq_barrier - insert a barrier work
- * @cwq: cwq to insert barrier into
+ * @pwq: pwq to insert barrier into
* @barr: wq_barrier to insert
* @target: target work to attach @barr to
* @worker: worker currently executing @target, NULL if @target is not executing
@@ -2496,12 +2421,12 @@
* after a work with LINKED flag set.
*
* Note that when @worker is non-NULL, @target may be modified
- * underneath us, so we can't reliably determine cwq from @target.
+ * underneath us, so we can't reliably determine pwq from @target.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
-static void insert_wq_barrier(struct cpu_workqueue_struct *cwq,
+static void insert_wq_barrier(struct pool_workqueue *pwq,
struct wq_barrier *barr,
struct work_struct *target, struct worker *worker)
{
@@ -2509,7 +2434,7 @@
unsigned int linked = 0;
/*
- * debugobject calls are safe here even with gcwq->lock locked
+ * debugobject calls are safe here even with pool->lock locked
* as we know for sure that this will not trigger any of the
* checks and call back into the fixup functions where we
* might deadlock.
@@ -2534,23 +2459,23 @@
}
debug_work_activate(&barr->work);
- insert_work(cwq, &barr->work, head,
+ insert_work(pwq, &barr->work, head,
work_color_to_flags(WORK_NO_COLOR) | linked);
}
/**
- * flush_workqueue_prep_cwqs - prepare cwqs for workqueue flushing
+ * flush_workqueue_prep_pwqs - prepare pwqs for workqueue flushing
* @wq: workqueue being flushed
* @flush_color: new flush color, < 0 for no-op
* @work_color: new work color, < 0 for no-op
*
- * Prepare cwqs for workqueue flushing.
+ * Prepare pwqs for workqueue flushing.
*
- * If @flush_color is non-negative, flush_color on all cwqs should be
- * -1. If no cwq has in-flight commands at the specified color, all
- * cwq->flush_color's stay at -1 and %false is returned. If any cwq
- * has in flight commands, its cwq->flush_color is set to
- * @flush_color, @wq->nr_cwqs_to_flush is updated accordingly, cwq
+ * If @flush_color is non-negative, flush_color on all pwqs should be
+ * -1. If no pwq has in-flight commands at the specified color, all
+ * pwq->flush_color's stay at -1 and %false is returned. If any pwq
+ * has in flight commands, its pwq->flush_color is set to
+ * @flush_color, @wq->nr_pwqs_to_flush is updated accordingly, pwq
* wakeup logic is armed and %true is returned.
*
* The caller should have initialized @wq->first_flusher prior to
@@ -2558,7 +2483,7 @@
* @flush_color is negative, no flush color update is done and %false
* is returned.
*
- * If @work_color is non-negative, all cwqs should have the same
+ * If @work_color is non-negative, all pwqs should have the same
* work_color which is previous to @work_color and all will be
* advanced to @work_color.
*
@@ -2569,42 +2494,42 @@
* %true if @flush_color >= 0 and there's something to flush. %false
* otherwise.
*/
-static bool flush_workqueue_prep_cwqs(struct workqueue_struct *wq,
+static bool flush_workqueue_prep_pwqs(struct workqueue_struct *wq,
int flush_color, int work_color)
{
bool wait = false;
unsigned int cpu;
if (flush_color >= 0) {
- BUG_ON(atomic_read(&wq->nr_cwqs_to_flush));
- atomic_set(&wq->nr_cwqs_to_flush, 1);
+ BUG_ON(atomic_read(&wq->nr_pwqs_to_flush));
+ atomic_set(&wq->nr_pwqs_to_flush, 1);
}
- for_each_cwq_cpu(cpu, wq) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
- struct global_cwq *gcwq = cwq->pool->gcwq;
+ for_each_pwq_cpu(cpu, wq) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
+ struct worker_pool *pool = pwq->pool;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
if (flush_color >= 0) {
- BUG_ON(cwq->flush_color != -1);
+ BUG_ON(pwq->flush_color != -1);
- if (cwq->nr_in_flight[flush_color]) {
- cwq->flush_color = flush_color;
- atomic_inc(&wq->nr_cwqs_to_flush);
+ if (pwq->nr_in_flight[flush_color]) {
+ pwq->flush_color = flush_color;
+ atomic_inc(&wq->nr_pwqs_to_flush);
wait = true;
}
}
if (work_color >= 0) {
- BUG_ON(work_color != work_next_color(cwq->work_color));
- cwq->work_color = work_color;
+ BUG_ON(work_color != work_next_color(pwq->work_color));
+ pwq->work_color = work_color;
}
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
- if (flush_color >= 0 && atomic_dec_and_test(&wq->nr_cwqs_to_flush))
+ if (flush_color >= 0 && atomic_dec_and_test(&wq->nr_pwqs_to_flush))
complete(&wq->first_flusher->done);
return wait;
@@ -2655,7 +2580,7 @@
wq->first_flusher = &this_flusher;
- if (!flush_workqueue_prep_cwqs(wq, wq->flush_color,
+ if (!flush_workqueue_prep_pwqs(wq, wq->flush_color,
wq->work_color)) {
/* nothing to flush, done */
wq->flush_color = next_color;
@@ -2666,7 +2591,7 @@
/* wait in queue */
BUG_ON(wq->flush_color == this_flusher.flush_color);
list_add_tail(&this_flusher.list, &wq->flusher_queue);
- flush_workqueue_prep_cwqs(wq, -1, wq->work_color);
+ flush_workqueue_prep_pwqs(wq, -1, wq->work_color);
}
} else {
/*
@@ -2733,7 +2658,7 @@
list_splice_tail_init(&wq->flusher_overflow,
&wq->flusher_queue);
- flush_workqueue_prep_cwqs(wq, -1, wq->work_color);
+ flush_workqueue_prep_pwqs(wq, -1, wq->work_color);
}
if (list_empty(&wq->flusher_queue)) {
@@ -2743,7 +2668,7 @@
/*
* Need to flush more colors. Make the next flusher
- * the new first flusher and arm cwqs.
+ * the new first flusher and arm pwqs.
*/
BUG_ON(wq->flush_color == wq->work_color);
BUG_ON(wq->flush_color != next->flush_color);
@@ -2751,7 +2676,7 @@
list_del_init(&next->list);
wq->first_flusher = next;
- if (flush_workqueue_prep_cwqs(wq, wq->flush_color, -1))
+ if (flush_workqueue_prep_pwqs(wq, wq->flush_color, -1))
break;
/*
@@ -2794,13 +2719,13 @@
reflush:
flush_workqueue(wq);
- for_each_cwq_cpu(cpu, wq) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ for_each_pwq_cpu(cpu, wq) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
bool drained;
- spin_lock_irq(&cwq->pool->gcwq->lock);
- drained = !cwq->nr_active && list_empty(&cwq->delayed_works);
- spin_unlock_irq(&cwq->pool->gcwq->lock);
+ spin_lock_irq(&pwq->pool->lock);
+ drained = !pwq->nr_active && list_empty(&pwq->delayed_works);
+ spin_unlock_irq(&pwq->pool->lock);
if (drained)
continue;
@@ -2822,34 +2747,29 @@
static bool start_flush_work(struct work_struct *work, struct wq_barrier *barr)
{
struct worker *worker = NULL;
- struct global_cwq *gcwq;
- struct cpu_workqueue_struct *cwq;
+ struct worker_pool *pool;
+ struct pool_workqueue *pwq;
might_sleep();
- gcwq = get_work_gcwq(work);
- if (!gcwq)
+ pool = get_work_pool(work);
+ if (!pool)
return false;
- spin_lock_irq(&gcwq->lock);
- if (!list_empty(&work->entry)) {
- /*
- * See the comment near try_to_grab_pending()->smp_rmb().
- * If it was re-queued to a different gcwq under us, we
- * are not going to wait.
- */
- smp_rmb();
- cwq = get_work_cwq(work);
- if (unlikely(!cwq || gcwq != cwq->pool->gcwq))
+ spin_lock_irq(&pool->lock);
+ /* see the comment in try_to_grab_pending() with the same code */
+ pwq = get_work_pwq(work);
+ if (pwq) {
+ if (unlikely(pwq->pool != pool))
goto already_gone;
} else {
- worker = find_worker_executing_work(gcwq, work);
+ worker = find_worker_executing_work(pool, work);
if (!worker)
goto already_gone;
- cwq = worker->current_cwq;
+ pwq = worker->current_pwq;
}
- insert_wq_barrier(cwq, barr, work, worker);
- spin_unlock_irq(&gcwq->lock);
+ insert_wq_barrier(pwq, barr, work, worker);
+ spin_unlock_irq(&pool->lock);
/*
* If @max_active is 1 or rescuer is in use, flushing another work
@@ -2857,15 +2777,15 @@
* flusher is not running on the same workqueue by verifying write
* access.
*/
- if (cwq->wq->saved_max_active == 1 || cwq->wq->flags & WQ_RESCUER)
- lock_map_acquire(&cwq->wq->lockdep_map);
+ if (pwq->wq->saved_max_active == 1 || pwq->wq->flags & WQ_RESCUER)
+ lock_map_acquire(&pwq->wq->lockdep_map);
else
- lock_map_acquire_read(&cwq->wq->lockdep_map);
- lock_map_release(&cwq->wq->lockdep_map);
+ lock_map_acquire_read(&pwq->wq->lockdep_map);
+ lock_map_release(&pwq->wq->lockdep_map);
return true;
already_gone:
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
return false;
}
@@ -2961,8 +2881,7 @@
{
local_irq_disable();
if (del_timer_sync(&dwork->timer))
- __queue_work(dwork->cpu,
- get_work_cwq(&dwork->work)->wq, &dwork->work);
+ __queue_work(dwork->cpu, dwork->wq, &dwork->work);
local_irq_enable();
return flush_work(&dwork->work);
}
@@ -2992,7 +2911,8 @@
if (unlikely(ret < 0))
return false;
- set_work_cpu_and_clear_pending(&dwork->work, work_cpu(&dwork->work));
+ set_work_pool_and_clear_pending(&dwork->work,
+ get_work_pool_id(&dwork->work));
local_irq_restore(flags);
return ret;
}
@@ -3171,46 +3091,46 @@
return system_wq != NULL;
}
-static int alloc_cwqs(struct workqueue_struct *wq)
+static int alloc_pwqs(struct workqueue_struct *wq)
{
/*
- * cwqs are forced aligned according to WORK_STRUCT_FLAG_BITS.
+ * pwqs are forced aligned according to WORK_STRUCT_FLAG_BITS.
* Make sure that the alignment isn't lower than that of
* unsigned long long.
*/
- const size_t size = sizeof(struct cpu_workqueue_struct);
+ const size_t size = sizeof(struct pool_workqueue);
const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long));
if (!(wq->flags & WQ_UNBOUND))
- wq->cpu_wq.pcpu = __alloc_percpu(size, align);
+ wq->pool_wq.pcpu = __alloc_percpu(size, align);
else {
void *ptr;
/*
- * Allocate enough room to align cwq and put an extra
+ * Allocate enough room to align pwq and put an extra
* pointer at the end pointing back to the originally
* allocated pointer which will be used for free.
*/
ptr = kzalloc(size + align + sizeof(void *), GFP_KERNEL);
if (ptr) {
- wq->cpu_wq.single = PTR_ALIGN(ptr, align);
- *(void **)(wq->cpu_wq.single + 1) = ptr;
+ wq->pool_wq.single = PTR_ALIGN(ptr, align);
+ *(void **)(wq->pool_wq.single + 1) = ptr;
}
}
/* just in case, make sure it's actually aligned */
- BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
- return wq->cpu_wq.v ? 0 : -ENOMEM;
+ BUG_ON(!IS_ALIGNED(wq->pool_wq.v, align));
+ return wq->pool_wq.v ? 0 : -ENOMEM;
}
-static void free_cwqs(struct workqueue_struct *wq)
+static void free_pwqs(struct workqueue_struct *wq)
{
if (!(wq->flags & WQ_UNBOUND))
- free_percpu(wq->cpu_wq.pcpu);
- else if (wq->cpu_wq.single) {
- /* the pointer to free is stored right after the cwq */
- kfree(*(void **)(wq->cpu_wq.single + 1));
+ free_percpu(wq->pool_wq.pcpu);
+ else if (wq->pool_wq.single) {
+ /* the pointer to free is stored right after the pwq */
+ kfree(*(void **)(wq->pool_wq.single + 1));
}
}
@@ -3264,27 +3184,25 @@
wq->flags = flags;
wq->saved_max_active = max_active;
mutex_init(&wq->flush_mutex);
- atomic_set(&wq->nr_cwqs_to_flush, 0);
+ atomic_set(&wq->nr_pwqs_to_flush, 0);
INIT_LIST_HEAD(&wq->flusher_queue);
INIT_LIST_HEAD(&wq->flusher_overflow);
lockdep_init_map(&wq->lockdep_map, lock_name, key, 0);
INIT_LIST_HEAD(&wq->list);
- if (alloc_cwqs(wq) < 0)
+ if (alloc_pwqs(wq) < 0)
goto err;
- for_each_cwq_cpu(cpu, wq) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
- struct global_cwq *gcwq = get_gcwq(cpu);
- int pool_idx = (bool)(flags & WQ_HIGHPRI);
+ for_each_pwq_cpu(cpu, wq) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
- BUG_ON((unsigned long)cwq & WORK_STRUCT_FLAG_MASK);
- cwq->pool = &gcwq->pools[pool_idx];
- cwq->wq = wq;
- cwq->flush_color = -1;
- cwq->max_active = max_active;
- INIT_LIST_HEAD(&cwq->delayed_works);
+ BUG_ON((unsigned long)pwq & WORK_STRUCT_FLAG_MASK);
+ pwq->pool = get_std_worker_pool(cpu, flags & WQ_HIGHPRI);
+ pwq->wq = wq;
+ pwq->flush_color = -1;
+ pwq->max_active = max_active;
+ INIT_LIST_HEAD(&pwq->delayed_works);
}
if (flags & WQ_RESCUER) {
@@ -3297,7 +3215,8 @@
if (!rescuer)
goto err;
- rescuer->task = kthread_create(rescuer_thread, wq, "%s",
+ rescuer->rescue_wq = wq;
+ rescuer->task = kthread_create(rescuer_thread, rescuer, "%s",
wq->name);
if (IS_ERR(rescuer->task))
goto err;
@@ -3314,8 +3233,8 @@
spin_lock(&workqueue_lock);
if (workqueue_freezing && wq->flags & WQ_FREEZABLE)
- for_each_cwq_cpu(cpu, wq)
- get_cwq(cpu, wq)->max_active = 0;
+ for_each_pwq_cpu(cpu, wq)
+ get_pwq(cpu, wq)->max_active = 0;
list_add(&wq->list, &workqueues);
@@ -3324,7 +3243,7 @@
return wq;
err:
if (wq) {
- free_cwqs(wq);
+ free_pwqs(wq);
free_mayday_mask(wq->mayday_mask);
kfree(wq->rescuer);
kfree(wq);
@@ -3355,14 +3274,14 @@
spin_unlock(&workqueue_lock);
/* sanity check */
- for_each_cwq_cpu(cpu, wq) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ for_each_pwq_cpu(cpu, wq) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
int i;
for (i = 0; i < WORK_NR_COLORS; i++)
- BUG_ON(cwq->nr_in_flight[i]);
- BUG_ON(cwq->nr_active);
- BUG_ON(!list_empty(&cwq->delayed_works));
+ BUG_ON(pwq->nr_in_flight[i]);
+ BUG_ON(pwq->nr_active);
+ BUG_ON(!list_empty(&pwq->delayed_works));
}
if (wq->flags & WQ_RESCUER) {
@@ -3371,29 +3290,29 @@
kfree(wq->rescuer);
}
- free_cwqs(wq);
+ free_pwqs(wq);
kfree(wq);
}
EXPORT_SYMBOL_GPL(destroy_workqueue);
/**
- * cwq_set_max_active - adjust max_active of a cwq
- * @cwq: target cpu_workqueue_struct
+ * pwq_set_max_active - adjust max_active of a pwq
+ * @pwq: target pool_workqueue
* @max_active: new max_active value.
*
- * Set @cwq->max_active to @max_active and activate delayed works if
+ * Set @pwq->max_active to @max_active and activate delayed works if
* increased.
*
* CONTEXT:
- * spin_lock_irq(gcwq->lock).
+ * spin_lock_irq(pool->lock).
*/
-static void cwq_set_max_active(struct cpu_workqueue_struct *cwq, int max_active)
+static void pwq_set_max_active(struct pool_workqueue *pwq, int max_active)
{
- cwq->max_active = max_active;
+ pwq->max_active = max_active;
- while (!list_empty(&cwq->delayed_works) &&
- cwq->nr_active < cwq->max_active)
- cwq_activate_first_delayed(cwq);
+ while (!list_empty(&pwq->delayed_works) &&
+ pwq->nr_active < pwq->max_active)
+ pwq_activate_first_delayed(pwq);
}
/**
@@ -3416,16 +3335,17 @@
wq->saved_max_active = max_active;
- for_each_cwq_cpu(cpu, wq) {
- struct global_cwq *gcwq = get_gcwq(cpu);
+ for_each_pwq_cpu(cpu, wq) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
+ struct worker_pool *pool = pwq->pool;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
if (!(wq->flags & WQ_FREEZABLE) ||
- !(gcwq->flags & GCWQ_FREEZING))
- cwq_set_max_active(get_cwq(gcwq->cpu, wq), max_active);
+ !(pool->flags & POOL_FREEZING))
+ pwq_set_max_active(pwq, max_active);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
spin_unlock(&workqueue_lock);
@@ -3446,57 +3366,38 @@
*/
bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq)
{
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
- return !list_empty(&cwq->delayed_works);
+ return !list_empty(&pwq->delayed_works);
}
EXPORT_SYMBOL_GPL(workqueue_congested);
/**
- * work_cpu - return the last known associated cpu for @work
- * @work: the work of interest
- *
- * RETURNS:
- * CPU number if @work was ever queued. WORK_CPU_NONE otherwise.
- */
-unsigned int work_cpu(struct work_struct *work)
-{
- struct global_cwq *gcwq = get_work_gcwq(work);
-
- return gcwq ? gcwq->cpu : WORK_CPU_NONE;
-}
-EXPORT_SYMBOL_GPL(work_cpu);
-
-/**
* work_busy - test whether a work is currently pending or running
* @work: the work to be tested
*
* Test whether @work is currently pending or running. There is no
* synchronization around this function and the test result is
* unreliable and only useful as advisory hints or for debugging.
- * Especially for reentrant wqs, the pending state might hide the
- * running state.
*
* RETURNS:
* OR'd bitmask of WORK_BUSY_* bits.
*/
unsigned int work_busy(struct work_struct *work)
{
- struct global_cwq *gcwq = get_work_gcwq(work);
+ struct worker_pool *pool = get_work_pool(work);
unsigned long flags;
unsigned int ret = 0;
- if (!gcwq)
- return 0;
-
- spin_lock_irqsave(&gcwq->lock, flags);
-
if (work_pending(work))
ret |= WORK_BUSY_PENDING;
- if (find_worker_executing_work(gcwq, work))
- ret |= WORK_BUSY_RUNNING;
- spin_unlock_irqrestore(&gcwq->lock, flags);
+ if (pool) {
+ spin_lock_irqsave(&pool->lock, flags);
+ if (find_worker_executing_work(pool, work))
+ ret |= WORK_BUSY_RUNNING;
+ spin_unlock_irqrestore(&pool->lock, flags);
+ }
return ret;
}
@@ -3506,65 +3407,49 @@
* CPU hotplug.
*
* There are two challenges in supporting CPU hotplug. Firstly, there
- * are a lot of assumptions on strong associations among work, cwq and
- * gcwq which make migrating pending and scheduled works very
+ * are a lot of assumptions on strong associations among work, pwq and
+ * pool which make migrating pending and scheduled works very
* difficult to implement without impacting hot paths. Secondly,
- * gcwqs serve mix of short, long and very long running works making
+ * worker pools serve mix of short, long and very long running works making
* blocked draining impractical.
*
- * This is solved by allowing a gcwq to be disassociated from the CPU
+ * This is solved by allowing the pools to be disassociated from the CPU
* running as an unbound one and allowing it to be reattached later if the
* cpu comes back online.
*/
-/* claim manager positions of all pools */
-static void gcwq_claim_assoc_and_lock(struct global_cwq *gcwq)
+static void wq_unbind_fn(struct work_struct *work)
{
- struct worker_pool *pool;
-
- for_each_worker_pool(pool, gcwq)
- mutex_lock_nested(&pool->assoc_mutex, pool - gcwq->pools);
- spin_lock_irq(&gcwq->lock);
-}
-
-/* release manager positions */
-static void gcwq_release_assoc_and_unlock(struct global_cwq *gcwq)
-{
- struct worker_pool *pool;
-
- spin_unlock_irq(&gcwq->lock);
- for_each_worker_pool(pool, gcwq)
- mutex_unlock(&pool->assoc_mutex);
-}
-
-static void gcwq_unbind_fn(struct work_struct *work)
-{
- struct global_cwq *gcwq = get_gcwq(smp_processor_id());
+ int cpu = smp_processor_id();
struct worker_pool *pool;
struct worker *worker;
struct hlist_node *pos;
int i;
- BUG_ON(gcwq->cpu != smp_processor_id());
+ for_each_std_worker_pool(pool, cpu) {
+ BUG_ON(cpu != smp_processor_id());
- gcwq_claim_assoc_and_lock(gcwq);
+ mutex_lock(&pool->assoc_mutex);
+ spin_lock_irq(&pool->lock);
- /*
- * We've claimed all manager positions. Make all workers unbound
- * and set DISASSOCIATED. Before this, all workers except for the
- * ones which are still executing works from before the last CPU
- * down must be on the cpu. After this, they may become diasporas.
- */
- for_each_worker_pool(pool, gcwq)
+ /*
+ * We've claimed all manager positions. Make all workers
+ * unbound and set DISASSOCIATED. Before this, all workers
+ * except for the ones which are still executing works from
+ * before the last CPU down must be on the cpu. After
+ * this, they may become diasporas.
+ */
list_for_each_entry(worker, &pool->idle_list, entry)
worker->flags |= WORKER_UNBOUND;
- for_each_busy_worker(worker, i, pos, gcwq)
- worker->flags |= WORKER_UNBOUND;
+ for_each_busy_worker(worker, i, pos, pool)
+ worker->flags |= WORKER_UNBOUND;
- gcwq->flags |= GCWQ_DISASSOCIATED;
+ pool->flags |= POOL_DISASSOCIATED;
- gcwq_release_assoc_and_unlock(gcwq);
+ spin_unlock_irq(&pool->lock);
+ mutex_unlock(&pool->assoc_mutex);
+ }
/*
* Call schedule() so that we cross rq->lock and thus can guarantee
@@ -3576,16 +3461,16 @@
/*
* Sched callbacks are disabled now. Zap nr_running. After this,
* nr_running stays zero and need_more_worker() and keep_working()
- * are always true as long as the worklist is not empty. @gcwq now
- * behaves as unbound (in terms of concurrency management) gcwq
- * which is served by workers tied to the CPU.
+ * are always true as long as the worklist is not empty. Pools on
+ * @cpu now behave as unbound (in terms of concurrency management)
+ * pools which are served by workers tied to the CPU.
*
* On return from this function, the current worker would trigger
* unbound chain execution of pending work items if other workers
* didn't already.
*/
- for_each_worker_pool(pool, gcwq)
- atomic_set(get_pool_nr_running(pool), 0);
+ for_each_std_worker_pool(pool, cpu)
+ atomic_set(&pool->nr_running, 0);
}
/*
@@ -3597,12 +3482,11 @@
void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct global_cwq *gcwq = get_gcwq(cpu);
struct worker_pool *pool;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_UP_PREPARE:
- for_each_worker_pool(pool, gcwq) {
+ for_each_std_worker_pool(pool, cpu) {
struct worker *worker;
if (pool->nr_workers)
@@ -3612,18 +3496,24 @@
if (!worker)
return NOTIFY_BAD;
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
start_worker(worker);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
break;
case CPU_DOWN_FAILED:
case CPU_ONLINE:
- gcwq_claim_assoc_and_lock(gcwq);
- gcwq->flags &= ~GCWQ_DISASSOCIATED;
- rebind_workers(gcwq);
- gcwq_release_assoc_and_unlock(gcwq);
+ for_each_std_worker_pool(pool, cpu) {
+ mutex_lock(&pool->assoc_mutex);
+ spin_lock_irq(&pool->lock);
+
+ pool->flags &= ~POOL_DISASSOCIATED;
+ rebind_workers(pool);
+
+ spin_unlock_irq(&pool->lock);
+ mutex_unlock(&pool->assoc_mutex);
+ }
break;
}
return NOTIFY_OK;
@@ -3643,7 +3533,7 @@
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
/* unbinding should happen on the local CPU */
- INIT_WORK_ONSTACK(&unbind_work, gcwq_unbind_fn);
+ INIT_WORK_ONSTACK(&unbind_work, wq_unbind_fn);
queue_work_on(cpu, system_highpri_wq, &unbind_work);
flush_work(&unbind_work);
break;
@@ -3696,10 +3586,10 @@
*
* Start freezing workqueues. After this function returns, all freezable
* workqueues will queue new works to their frozen_works list instead of
- * gcwq->worklist.
+ * pool->worklist.
*
* CONTEXT:
- * Grabs and releases workqueue_lock and gcwq->lock's.
+ * Grabs and releases workqueue_lock and pool->lock's.
*/
void freeze_workqueues_begin(void)
{
@@ -3710,23 +3600,26 @@
BUG_ON(workqueue_freezing);
workqueue_freezing = true;
- for_each_gcwq_cpu(cpu) {
- struct global_cwq *gcwq = get_gcwq(cpu);
+ for_each_wq_cpu(cpu) {
+ struct worker_pool *pool;
struct workqueue_struct *wq;
- spin_lock_irq(&gcwq->lock);
+ for_each_std_worker_pool(pool, cpu) {
+ spin_lock_irq(&pool->lock);
- BUG_ON(gcwq->flags & GCWQ_FREEZING);
- gcwq->flags |= GCWQ_FREEZING;
+ WARN_ON_ONCE(pool->flags & POOL_FREEZING);
+ pool->flags |= POOL_FREEZING;
- list_for_each_entry(wq, &workqueues, list) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ list_for_each_entry(wq, &workqueues, list) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
- if (cwq && wq->flags & WQ_FREEZABLE)
- cwq->max_active = 0;
+ if (pwq && pwq->pool == pool &&
+ (wq->flags & WQ_FREEZABLE))
+ pwq->max_active = 0;
+ }
+
+ spin_unlock_irq(&pool->lock);
}
-
- spin_unlock_irq(&gcwq->lock);
}
spin_unlock(&workqueue_lock);
@@ -3754,20 +3647,20 @@
BUG_ON(!workqueue_freezing);
- for_each_gcwq_cpu(cpu) {
+ for_each_wq_cpu(cpu) {
struct workqueue_struct *wq;
/*
* nr_active is monotonically decreasing. It's safe
* to peek without lock.
*/
list_for_each_entry(wq, &workqueues, list) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
- if (!cwq || !(wq->flags & WQ_FREEZABLE))
+ if (!pwq || !(wq->flags & WQ_FREEZABLE))
continue;
- BUG_ON(cwq->nr_active < 0);
- if (cwq->nr_active) {
+ BUG_ON(pwq->nr_active < 0);
+ if (pwq->nr_active) {
busy = true;
goto out_unlock;
}
@@ -3782,10 +3675,10 @@
* thaw_workqueues - thaw workqueues
*
* Thaw workqueues. Normal queueing is restored and all collected
- * frozen works are transferred to their respective gcwq worklists.
+ * frozen works are transferred to their respective pool worklists.
*
* CONTEXT:
- * Grabs and releases workqueue_lock and gcwq->lock's.
+ * Grabs and releases workqueue_lock and pool->lock's.
*/
void thaw_workqueues(void)
{
@@ -3796,30 +3689,31 @@
if (!workqueue_freezing)
goto out_unlock;
- for_each_gcwq_cpu(cpu) {
- struct global_cwq *gcwq = get_gcwq(cpu);
+ for_each_wq_cpu(cpu) {
struct worker_pool *pool;
struct workqueue_struct *wq;
- spin_lock_irq(&gcwq->lock);
+ for_each_std_worker_pool(pool, cpu) {
+ spin_lock_irq(&pool->lock);
- BUG_ON(!(gcwq->flags & GCWQ_FREEZING));
- gcwq->flags &= ~GCWQ_FREEZING;
+ WARN_ON_ONCE(!(pool->flags & POOL_FREEZING));
+ pool->flags &= ~POOL_FREEZING;
- list_for_each_entry(wq, &workqueues, list) {
- struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ list_for_each_entry(wq, &workqueues, list) {
+ struct pool_workqueue *pwq = get_pwq(cpu, wq);
- if (!cwq || !(wq->flags & WQ_FREEZABLE))
- continue;
+ if (!pwq || pwq->pool != pool ||
+ !(wq->flags & WQ_FREEZABLE))
+ continue;
- /* restore max_active and repopulate worklist */
- cwq_set_max_active(cwq, wq->saved_max_active);
- }
+ /* restore max_active and repopulate worklist */
+ pwq_set_max_active(pwq, wq->saved_max_active);
+ }
- for_each_worker_pool(pool, gcwq)
wake_up_worker(pool);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
+ }
}
workqueue_freezing = false;
@@ -3831,60 +3725,56 @@
static int __init init_workqueues(void)
{
unsigned int cpu;
- int i;
- /* make sure we have enough bits for OFFQ CPU number */
- BUILD_BUG_ON((1LU << (BITS_PER_LONG - WORK_OFFQ_CPU_SHIFT)) <
- WORK_CPU_LAST);
+ /* make sure we have enough bits for OFFQ pool ID */
+ BUILD_BUG_ON((1LU << (BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT)) <
+ WORK_CPU_END * NR_STD_WORKER_POOLS);
cpu_notifier(workqueue_cpu_up_callback, CPU_PRI_WORKQUEUE_UP);
hotcpu_notifier(workqueue_cpu_down_callback, CPU_PRI_WORKQUEUE_DOWN);
- /* initialize gcwqs */
- for_each_gcwq_cpu(cpu) {
- struct global_cwq *gcwq = get_gcwq(cpu);
+ /* initialize CPU pools */
+ for_each_wq_cpu(cpu) {
struct worker_pool *pool;
- spin_lock_init(&gcwq->lock);
- gcwq->cpu = cpu;
- gcwq->flags |= GCWQ_DISASSOCIATED;
-
- for (i = 0; i < BUSY_WORKER_HASH_SIZE; i++)
- INIT_HLIST_HEAD(&gcwq->busy_hash[i]);
-
- for_each_worker_pool(pool, gcwq) {
- pool->gcwq = gcwq;
+ for_each_std_worker_pool(pool, cpu) {
+ spin_lock_init(&pool->lock);
+ pool->cpu = cpu;
+ pool->flags |= POOL_DISASSOCIATED;
INIT_LIST_HEAD(&pool->worklist);
INIT_LIST_HEAD(&pool->idle_list);
+ hash_init(pool->busy_hash);
init_timer_deferrable(&pool->idle_timer);
pool->idle_timer.function = idle_worker_timeout;
pool->idle_timer.data = (unsigned long)pool;
- setup_timer(&pool->mayday_timer, gcwq_mayday_timeout,
+ setup_timer(&pool->mayday_timer, pool_mayday_timeout,
(unsigned long)pool);
mutex_init(&pool->assoc_mutex);
ida_init(&pool->worker_ida);
+
+ /* alloc pool ID */
+ BUG_ON(worker_pool_assign_id(pool));
}
}
/* create the initial worker */
- for_each_online_gcwq_cpu(cpu) {
- struct global_cwq *gcwq = get_gcwq(cpu);
+ for_each_online_wq_cpu(cpu) {
struct worker_pool *pool;
- if (cpu != WORK_CPU_UNBOUND)
- gcwq->flags &= ~GCWQ_DISASSOCIATED;
-
- for_each_worker_pool(pool, gcwq) {
+ for_each_std_worker_pool(pool, cpu) {
struct worker *worker;
+ if (cpu != WORK_CPU_UNBOUND)
+ pool->flags &= ~POOL_DISASSOCIATED;
+
worker = create_worker(pool);
BUG_ON(!worker);
- spin_lock_irq(&gcwq->lock);
+ spin_lock_irq(&pool->lock);
start_worker(worker);
- spin_unlock_irq(&gcwq->lock);
+ spin_unlock_irq(&pool->lock);
}
}
diff --git a/kernel/workqueue_internal.h b/kernel/workqueue_internal.h
new file mode 100644
index 0000000..0765026
--- /dev/null
+++ b/kernel/workqueue_internal.h
@@ -0,0 +1,65 @@
+/*
+ * kernel/workqueue_internal.h
+ *
+ * Workqueue internal header file. Only to be included by workqueue and
+ * core kernel subsystems.
+ */
+#ifndef _KERNEL_WORKQUEUE_INTERNAL_H
+#define _KERNEL_WORKQUEUE_INTERNAL_H
+
+#include <linux/workqueue.h>
+#include <linux/kthread.h>
+
+struct worker_pool;
+
+/*
+ * The poor guys doing the actual heavy lifting. All on-duty workers are
+ * either serving the manager role, on idle list or on busy hash. For
+ * details on the locking annotation (L, I, X...), refer to workqueue.c.
+ *
+ * Only to be used in workqueue and async.
+ */
+struct worker {
+ /* on idle list while idle, on busy hash table while busy */
+ union {
+ struct list_head entry; /* L: while idle */
+ struct hlist_node hentry; /* L: while busy */
+ };
+
+ struct work_struct *current_work; /* L: work being processed */
+ work_func_t current_func; /* L: current_work's fn */
+ struct pool_workqueue *current_pwq; /* L: current_work's pwq */
+ struct list_head scheduled; /* L: scheduled works */
+ struct task_struct *task; /* I: worker task */
+ struct worker_pool *pool; /* I: the associated pool */
+ /* 64 bytes boundary on 64bit, 32 on 32bit */
+ unsigned long last_active; /* L: last active timestamp */
+ unsigned int flags; /* X: flags */
+ int id; /* I: worker id */
+
+ /* for rebinding worker to CPU */
+ struct work_struct rebind_work; /* L: for busy worker */
+
+ /* used only by rescuers to point to the target workqueue */
+ struct workqueue_struct *rescue_wq; /* I: the workqueue to rescue */
+};
+
+/**
+ * current_wq_worker - return struct worker if %current is a workqueue worker
+ */
+static inline struct worker *current_wq_worker(void)
+{
+ if (current->flags & PF_WQ_WORKER)
+ return kthread_data(current);
+ return NULL;
+}
+
+/*
+ * Scheduler hooks for concurrency managed workqueue. Only to be used from
+ * sched.c and workqueue.c.
+ */
+void wq_worker_waking_up(struct task_struct *task, unsigned int cpu);
+struct task_struct *wq_worker_sleeping(struct task_struct *task,
+ unsigned int cpu);
+
+#endif /* _KERNEL_WORKQUEUE_INTERNAL_H */
diff --git a/kernel/workqueue_sched.h b/kernel/workqueue_sched.h
deleted file mode 100644
index 2d10fc9..0000000
--- a/kernel/workqueue_sched.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * kernel/workqueue_sched.h
- *
- * Scheduler hooks for concurrency managed workqueue. Only to be
- * included from sched.c and workqueue.c.
- */
-void wq_worker_waking_up(struct task_struct *task, unsigned int cpu);
-struct task_struct *wq_worker_sleeping(struct task_struct *task,
- unsigned int cpu);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 67604e5..a1714c8 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -605,61 +605,6 @@
For more details, see Documentation/lockdep-design.txt.
-config PROVE_RCU
- bool "RCU debugging: prove RCU correctness"
- depends on PROVE_LOCKING
- default n
- help
- This feature enables lockdep extensions that check for correct
- use of RCU APIs. This is currently under development. Say Y
- if you want to debug RCU usage or help work on the PROVE_RCU
- feature.
-
- Say N if you are unsure.
-
-config PROVE_RCU_REPEATEDLY
- bool "RCU debugging: don't disable PROVE_RCU on first splat"
- depends on PROVE_RCU
- default n
- help
- By itself, PROVE_RCU will disable checking upon issuing the
- first warning (or "splat"). This feature prevents such
- disabling, allowing multiple RCU-lockdep warnings to be printed
- on a single reboot.
-
- Say Y to allow multiple RCU-lockdep warnings per boot.
-
- Say N if you are unsure.
-
-config PROVE_RCU_DELAY
- bool "RCU debugging: preemptible RCU race provocation"
- depends on DEBUG_KERNEL && PREEMPT_RCU
- default n
- help
- There is a class of races that involve an unlikely preemption
- of __rcu_read_unlock() just after ->rcu_read_lock_nesting has
- been set to INT_MIN. This feature inserts a delay at that
- point to increase the probability of these races.
-
- Say Y to increase probability of preemption of __rcu_read_unlock().
-
- Say N if you are unsure.
-
-config SPARSE_RCU_POINTER
- bool "RCU debugging: sparse-based checks for pointer usage"
- default n
- help
- This feature enables the __rcu sparse annotation for
- RCU-protected pointers. This annotation will cause sparse
- to flag any non-RCU used of annotated pointers. This can be
- helpful when debugging RCU usage. Please note that this feature
- is not intended to enforce code cleanliness; it is instead merely
- a debugging aid.
-
- Say Y to make sparse flag questionable use of RCU-protected pointers
-
- Say N if you are unsure.
-
config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
@@ -937,6 +882,63 @@
BOOT_PRINTK_DELAY also may cause LOCKUP_DETECTOR to detect
what it believes to be lockup conditions.
+menu "RCU Debugging"
+
+config PROVE_RCU
+ bool "RCU debugging: prove RCU correctness"
+ depends on PROVE_LOCKING
+ default n
+ help
+ This feature enables lockdep extensions that check for correct
+ use of RCU APIs. This is currently under development. Say Y
+ if you want to debug RCU usage or help work on the PROVE_RCU
+ feature.
+
+ Say N if you are unsure.
+
+config PROVE_RCU_REPEATEDLY
+ bool "RCU debugging: don't disable PROVE_RCU on first splat"
+ depends on PROVE_RCU
+ default n
+ help
+ By itself, PROVE_RCU will disable checking upon issuing the
+ first warning (or "splat"). This feature prevents such
+ disabling, allowing multiple RCU-lockdep warnings to be printed
+ on a single reboot.
+
+ Say Y to allow multiple RCU-lockdep warnings per boot.
+
+ Say N if you are unsure.
+
+config PROVE_RCU_DELAY
+ bool "RCU debugging: preemptible RCU race provocation"
+ depends on DEBUG_KERNEL && PREEMPT_RCU
+ default n
+ help
+ There is a class of races that involve an unlikely preemption
+ of __rcu_read_unlock() just after ->rcu_read_lock_nesting has
+ been set to INT_MIN. This feature inserts a delay at that
+ point to increase the probability of these races.
+
+ Say Y to increase probability of preemption of __rcu_read_unlock().
+
+ Say N if you are unsure.
+
+config SPARSE_RCU_POINTER
+ bool "RCU debugging: sparse-based checks for pointer usage"
+ default n
+ help
+ This feature enables the __rcu sparse annotation for
+ RCU-protected pointers. This annotation will cause sparse
+ to flag any non-RCU used of annotated pointers. This can be
+ helpful when debugging RCU usage. Please note that this feature
+ is not intended to enforce code cleanliness; it is instead merely
+ a debugging aid.
+
+ Say Y to make sparse flag questionable use of RCU-protected pointers
+
+ Say N if you are unsure.
+
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
@@ -970,7 +972,7 @@
config RCU_CPU_STALL_TIMEOUT
int "RCU CPU stall timeout in seconds"
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on RCU_STALL_COMMON
range 3 300
default 21
help
@@ -1008,6 +1010,7 @@
config RCU_TRACE
bool "Enable tracing for RCU"
depends on DEBUG_KERNEL
+ select TRACE_CLOCK
help
This option provides tracing in RCU which presents stats
in debugfs for debugging RCU implementation.
@@ -1015,6 +1018,8 @@
Say Y here if you want to enable RCU tracing
Say N if you are unsure.
+endmenu # "RCU Debugging"
+
config KPROBES_SANITY_TEST
bool "Kprobes sanity tests"
depends on DEBUG_KERNEL
diff --git a/mm/mmap.c b/mm/mmap.c
index d1e4124..09da0b2 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -32,6 +32,7 @@
#include <linux/khugepaged.h>
#include <linux/uprobes.h>
#include <linux/rbtree_augmented.h>
+#include <linux/sched/sysctl.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
diff --git a/mm/mremap.c b/mm/mremap.c
index e1031e1..f9766f4 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -19,6 +19,7 @@
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/mmu_notifier.h>
+#include <linux/sched/sysctl.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
diff --git a/mm/nommu.c b/mm/nommu.c
index 79c3cac..b20db4e 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -29,6 +29,7 @@
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/audit.h>
+#include <linux/sched/sysctl.h>
#include <asm/uaccess.h>
#include <asm/tlb.h>
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 0713bfb..66a0024 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -35,6 +35,7 @@
#include <linux/buffer_head.h> /* __set_page_dirty_buffers */
#include <linux/pagevec.h>
#include <linux/timer.h>
+#include <linux/sched/rt.h>
#include <trace/events/writeback.h>
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 9673d96..d1107ad 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -58,6 +58,7 @@
#include <linux/prefetch.h>
#include <linux/migrate.h>
#include <linux/page-debug-flags.h>
+#include <linux/sched/rt.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
@@ -4420,10 +4421,11 @@
* round what is now in bits to nearest long in bits, then return it in
* bytes.
*/
-static unsigned long __init usemap_size(unsigned long zonesize)
+static unsigned long __init usemap_size(unsigned long zone_start_pfn, unsigned long zonesize)
{
unsigned long usemapsize;
+ zonesize += zone_start_pfn & (pageblock_nr_pages-1);
usemapsize = roundup(zonesize, pageblock_nr_pages);
usemapsize = usemapsize >> pageblock_order;
usemapsize *= NR_PAGEBLOCK_BITS;
@@ -4433,17 +4435,19 @@
}
static void __init setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize)
+ struct zone *zone,
+ unsigned long zone_start_pfn,
+ unsigned long zonesize)
{
- unsigned long usemapsize = usemap_size(zonesize);
+ unsigned long usemapsize = usemap_size(zone_start_pfn, zonesize);
zone->pageblock_flags = NULL;
if (usemapsize)
zone->pageblock_flags = alloc_bootmem_node_nopanic(pgdat,
usemapsize);
}
#else
-static inline void setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize) {}
+static inline void setup_usemap(struct pglist_data *pgdat, struct zone *zone,
+ unsigned long zone_start_pfn, unsigned long zonesize) {}
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
@@ -4594,7 +4598,7 @@
continue;
set_pageblock_order();
- setup_usemap(pgdat, zone, size);
+ setup_usemap(pgdat, zone, zone_start_pfn, size);
ret = init_currently_empty_zone(zone, zone_start_pfn,
size, MEMMAP_EARLY);
BUG_ON(ret);
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
index c9d931e..b85107b 100644
--- a/net/rfkill/input.c
+++ b/net/rfkill/input.c
@@ -148,11 +148,9 @@
static void rfkill_schedule_ratelimited(void)
{
- if (delayed_work_pending(&rfkill_op_work))
- return;
- schedule_delayed_work(&rfkill_op_work,
- rfkill_ratelimit(rfkill_last_scheduled));
- rfkill_last_scheduled = jiffies;
+ if (schedule_delayed_work(&rfkill_op_work,
+ rfkill_ratelimit(rfkill_last_scheduled)))
+ rfkill_last_scheduled = jiffies;
}
static void rfkill_schedule_global_op(enum rfkill_sched_op op)
diff --git a/samples/Kconfig b/samples/Kconfig
index 7b6792a..6181c2c 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -5,12 +5,6 @@
if SAMPLES
-config SAMPLE_TRACEPOINTS
- tristate "Build tracepoints examples -- loadable modules only"
- depends on TRACEPOINTS && m
- help
- This build tracepoints example modules.
-
config SAMPLE_TRACE_EVENTS
tristate "Build trace_events examples -- loadable modules only"
depends on EVENT_TRACING && m
diff --git a/samples/Makefile b/samples/Makefile
index 5ef08bb..1a60c62 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,4 +1,4 @@
# Makefile for Linux samples code
-obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ \
+obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ trace_events/ \
hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/
diff --git a/samples/tracepoints/Makefile b/samples/tracepoints/Makefile
deleted file mode 100644
index 36479ad..0000000
--- a/samples/tracepoints/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# builds the tracepoint example kernel modules;
-# then to use one (as root): insmod <module_name.ko>
-
-obj-$(CONFIG_SAMPLE_TRACEPOINTS) += tracepoint-sample.o
-obj-$(CONFIG_SAMPLE_TRACEPOINTS) += tracepoint-probe-sample.o
-obj-$(CONFIG_SAMPLE_TRACEPOINTS) += tracepoint-probe-sample2.o
diff --git a/samples/tracepoints/tp-samples-trace.h b/samples/tracepoints/tp-samples-trace.h
deleted file mode 100644
index 4d46be9..0000000
--- a/samples/tracepoints/tp-samples-trace.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _TP_SAMPLES_TRACE_H
-#define _TP_SAMPLES_TRACE_H
-
-#include <linux/proc_fs.h> /* for struct inode and struct file */
-#include <linux/tracepoint.h>
-
-DECLARE_TRACE(subsys_event,
- TP_PROTO(struct inode *inode, struct file *file),
- TP_ARGS(inode, file));
-DECLARE_TRACE_NOARGS(subsys_eventb);
-#endif
diff --git a/samples/tracepoints/tracepoint-probe-sample.c b/samples/tracepoints/tracepoint-probe-sample.c
deleted file mode 100644
index 744c0b9..0000000
--- a/samples/tracepoints/tracepoint-probe-sample.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * tracepoint-probe-sample.c
- *
- * sample tracepoint probes.
- */
-
-#include <linux/module.h>
-#include <linux/file.h>
-#include <linux/dcache.h>
-#include "tp-samples-trace.h"
-
-/*
- * Here the caller only guarantees locking for struct file and struct inode.
- * Locking must therefore be done in the probe to use the dentry.
- */
-static void probe_subsys_event(void *ignore,
- struct inode *inode, struct file *file)
-{
- path_get(&file->f_path);
- dget(file->f_path.dentry);
- printk(KERN_INFO "Event is encountered with filename %s\n",
- file->f_path.dentry->d_name.name);
- dput(file->f_path.dentry);
- path_put(&file->f_path);
-}
-
-static void probe_subsys_eventb(void *ignore)
-{
- printk(KERN_INFO "Event B is encountered\n");
-}
-
-static int __init tp_sample_trace_init(void)
-{
- int ret;
-
- ret = register_trace_subsys_event(probe_subsys_event, NULL);
- WARN_ON(ret);
- ret = register_trace_subsys_eventb(probe_subsys_eventb, NULL);
- WARN_ON(ret);
-
- return 0;
-}
-
-module_init(tp_sample_trace_init);
-
-static void __exit tp_sample_trace_exit(void)
-{
- unregister_trace_subsys_eventb(probe_subsys_eventb, NULL);
- unregister_trace_subsys_event(probe_subsys_event, NULL);
- tracepoint_synchronize_unregister();
-}
-
-module_exit(tp_sample_trace_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mathieu Desnoyers");
-MODULE_DESCRIPTION("Tracepoint Probes Samples");
diff --git a/samples/tracepoints/tracepoint-probe-sample2.c b/samples/tracepoints/tracepoint-probe-sample2.c
deleted file mode 100644
index 9fcf990..0000000
--- a/samples/tracepoints/tracepoint-probe-sample2.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * tracepoint-probe-sample2.c
- *
- * 2nd sample tracepoint probes.
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include "tp-samples-trace.h"
-
-/*
- * Here the caller only guarantees locking for struct file and struct inode.
- * Locking must therefore be done in the probe to use the dentry.
- */
-static void probe_subsys_event(void *ignore,
- struct inode *inode, struct file *file)
-{
- printk(KERN_INFO "Event is encountered with inode number %lu\n",
- inode->i_ino);
-}
-
-static int __init tp_sample_trace_init(void)
-{
- int ret;
-
- ret = register_trace_subsys_event(probe_subsys_event, NULL);
- WARN_ON(ret);
-
- return 0;
-}
-
-module_init(tp_sample_trace_init);
-
-static void __exit tp_sample_trace_exit(void)
-{
- unregister_trace_subsys_event(probe_subsys_event, NULL);
- tracepoint_synchronize_unregister();
-}
-
-module_exit(tp_sample_trace_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mathieu Desnoyers");
-MODULE_DESCRIPTION("Tracepoint Probes Samples");
diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c
deleted file mode 100644
index f4d89e0..0000000
--- a/samples/tracepoints/tracepoint-sample.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* tracepoint-sample.c
- *
- * Executes a tracepoint when /proc/tracepoint-sample is opened.
- *
- * (C) Copyright 2007 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- *
- * This file is released under the GPLv2.
- * See the file COPYING for more details.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include "tp-samples-trace.h"
-
-DEFINE_TRACE(subsys_event);
-DEFINE_TRACE(subsys_eventb);
-
-struct proc_dir_entry *pentry_sample;
-
-static int my_open(struct inode *inode, struct file *file)
-{
- int i;
-
- trace_subsys_event(inode, file);
- for (i = 0; i < 10; i++)
- trace_subsys_eventb();
- return -EPERM;
-}
-
-static const struct file_operations mark_ops = {
- .open = my_open,
- .llseek = noop_llseek,
-};
-
-static int __init sample_init(void)
-{
- printk(KERN_ALERT "sample init\n");
- pentry_sample = proc_create("tracepoint-sample", 0444, NULL,
- &mark_ops);
- if (!pentry_sample)
- return -EPERM;
- return 0;
-}
-
-static void __exit sample_exit(void)
-{
- printk(KERN_ALERT "sample exit\n");
- remove_proc_entry("tracepoint-sample", NULL);
-}
-
-module_init(sample_init)
-module_exit(sample_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mathieu Desnoyers");
-MODULE_DESCRIPTION("Tracepoint sample");
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index bdf42fd..07125e6 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -156,6 +156,11 @@
ld_flags = $(LDFLAGS) $(ldflags-y)
+dtc_cpp_flags = -Wp,-MD,$(depfile) -nostdinc \
+ -I$(srctree)/arch/$(SRCARCH)/boot/dts \
+ -I$(srctree)/arch/$(SRCARCH)/include/dts \
+ -undef -D__DTS__
+
# Finds the multi-part object the current object will be linked into
modname-multi = $(sort $(foreach m,$(multi-used),\
$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
@@ -269,6 +274,15 @@
$(obj)/%.dtb: $(src)/%.dts FORCE
$(call if_changed_dep,dtc)
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts)
+
+quiet_cmd_dtc_cpp = DTC+CPP $@
+cmd_dtc_cpp = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $(dtc-tmp)
+
+$(obj)/%.dtb: $(src)/%.dtsp FORCE
+ $(call if_changed_dep,dtc_cpp)
+
# Bzip2
# ---------------------------------------------------------------------------
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index 1440b3f..988e817 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -1152,6 +1152,8 @@
SND_SOC_DAPM_OUTPUT("SPKOUTRP"),
SND_SOC_DAPM_OUTPUT("SPKDAT1L"),
SND_SOC_DAPM_OUTPUT("SPKDAT1R"),
+
+SND_SOC_DAPM_OUTPUT("MICSUPP"),
};
#define ARIZONA_MIXER_INPUT_ROUTES(name) \
@@ -1364,6 +1366,8 @@
{ "AEC Loopback", "SPKDAT1R", "OUT5R" },
{ "SPKDAT1L", NULL, "OUT5L" },
{ "SPKDAT1R", NULL, "OUT5R" },
+
+ { "MICSUPP", NULL, "SYSCLK" },
};
static int wm5102_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 7a09096..0320a32 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -624,6 +624,8 @@
SND_SOC_DAPM_OUTPUT("SPKDAT1R"),
SND_SOC_DAPM_OUTPUT("SPKDAT2L"),
SND_SOC_DAPM_OUTPUT("SPKDAT2R"),
+
+SND_SOC_DAPM_OUTPUT("MICSUPP"),
};
#define ARIZONA_MIXER_INPUT_ROUTES(name) \
@@ -832,6 +834,8 @@
{ "SPKDAT2L", NULL, "OUT6L" },
{ "SPKDAT2R", NULL, "OUT6R" },
+
+ { "MICSUPP", NULL, "SYSCLK" },
};
static int wm5110_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
diff --git a/tools/Makefile b/tools/Makefile
index 1f9a529..fa36565 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -3,6 +3,7 @@
help:
@echo 'Possible targets:'
@echo ''
+ @echo ' cgroup - cgroup tools'
@echo ' cpupower - a tool for all things x86 CPU power'
@echo ' firewire - the userspace part of nosy, an IEEE-1394 traffic sniffer'
@echo ' lguest - a minimal 32-bit x86 hypervisor'
@@ -15,7 +16,7 @@
@echo ' x86_energy_perf_policy - Intel energy policy tool'
@echo ''
@echo 'You can do:'
- @echo ' $$ make -C tools/<tool>_install'
+ @echo ' $$ make -C tools/ <tool>_install'
@echo ''
@echo ' from the kernel command line to build and install one of'
@echo ' the tools above'
@@ -33,7 +34,7 @@
cpupower: FORCE
$(call descend,power/$@)
-firewire lguest perf usb virtio vm: FORCE
+cgroup firewire lguest perf usb virtio vm: FORCE
$(call descend,$@)
selftests: FORCE
@@ -45,7 +46,7 @@
cpupower_install:
$(call descend,power/$(@:_install=),install)
-firewire_install lguest_install perf_install usb_install virtio_install vm_install:
+cgroup_install firewire_install lguest_install perf_install usb_install virtio_install vm_install:
$(call descend,$(@:_install=),install)
selftests_install:
@@ -54,14 +55,14 @@
turbostat_install x86_energy_perf_policy_install:
$(call descend,power/x86/$(@:_install=),install)
-install: cpupower_install firewire_install lguest_install perf_install \
- selftests_install turbostat_install usb_install virtio_install \
- vm_install x86_energy_perf_policy_install
+install: cgroup_install cpupower_install firewire_install lguest_install \
+ perf_install selftests_install turbostat_install usb_install \
+ virtio_install vm_install x86_energy_perf_policy_install
cpupower_clean:
$(call descend,power/cpupower,clean)
-firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean:
+cgroup_clean firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean:
$(call descend,$(@:_clean=),clean)
selftests_clean:
@@ -70,8 +71,8 @@
turbostat_clean x86_energy_perf_policy_clean:
$(call descend,power/x86/$(@:_clean=),clean)
-clean: cpupower_clean firewire_clean lguest_clean perf_clean selftests_clean \
- turbostat_clean usb_clean virtio_clean vm_clean \
- x86_energy_perf_policy_clean
+clean: cgroup_clean cpupower_clean firewire_clean lguest_clean perf_clean \
+ selftests_clean turbostat_clean usb_clean virtio_clean \
+ vm_clean x86_energy_perf_policy_clean
.PHONY: FORCE
diff --git a/tools/cgroup/.gitignore b/tools/cgroup/.gitignore
new file mode 100644
index 0000000..633cd9b
--- /dev/null
+++ b/tools/cgroup/.gitignore
@@ -0,0 +1 @@
+cgroup_event_listener
diff --git a/tools/cgroup/Makefile b/tools/cgroup/Makefile
new file mode 100644
index 0000000..b428619
--- /dev/null
+++ b/tools/cgroup/Makefile
@@ -0,0 +1,11 @@
+# Makefile for cgroup tools
+
+CC = $(CROSS_COMPILE)gcc
+CFLAGS = -Wall -Wextra
+
+all: cgroup_event_listener
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+clean:
+ $(RM) cgroup_event_listener
diff --git a/tools/cgroup/cgroup_event_listener.c b/tools/cgroup/cgroup_event_listener.c
new file mode 100644
index 0000000..4eb5507
--- /dev/null
+++ b/tools/cgroup/cgroup_event_listener.c
@@ -0,0 +1,82 @@
+/*
+ * cgroup_event_listener.c - Simple listener of cgroup events
+ *
+ * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
+ */
+
+#include <assert.h>
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/eventfd.h>
+
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>"
+
+int main(int argc, char **argv)
+{
+ int efd = -1;
+ int cfd = -1;
+ int event_control = -1;
+ char event_control_path[PATH_MAX];
+ char line[LINE_MAX];
+ int ret;
+
+ if (argc != 3)
+ errx(1, "%s", USAGE_STR);
+
+ cfd = open(argv[1], O_RDONLY);
+ if (cfd == -1)
+ err(1, "Cannot open %s", argv[1]);
+
+ ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
+ dirname(argv[1]));
+ if (ret >= PATH_MAX)
+ errx(1, "Path to cgroup.event_control is too long");
+
+ event_control = open(event_control_path, O_WRONLY);
+ if (event_control == -1)
+ err(1, "Cannot open %s", event_control_path);
+
+ efd = eventfd(0, 0);
+ if (efd == -1)
+ err(1, "eventfd() failed");
+
+ ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
+ if (ret >= LINE_MAX)
+ errx(1, "Arguments string is too long");
+
+ ret = write(event_control, line, strlen(line) + 1);
+ if (ret == -1)
+ err(1, "Cannot write to cgroup.event_control");
+
+ while (1) {
+ uint64_t result;
+
+ ret = read(efd, &result, sizeof(result));
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ err(1, "Cannot read from eventfd");
+ }
+ assert(ret == sizeof(result));
+
+ ret = access(event_control_path, W_OK);
+ if ((ret == -1) && (errno == ENOENT)) {
+ puts("The cgroup seems to have removed.");
+ break;
+ }
+
+ if (ret == -1)
+ err(1, "cgroup.event_control is not accessible any more");
+
+ printf("%s %s: crossed\n", argv[1], argv[2]);
+ }
+
+ return 0;
+}
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 5a824e3..82b0606 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -13,8 +13,7 @@
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -1224,6 +1223,34 @@
return 0;
}
+static unsigned int type_size(const char *name)
+{
+ /* This covers all FIELD_IS_STRING types. */
+ static struct {
+ const char *type;
+ unsigned int size;
+ } table[] = {
+ { "u8", 1 },
+ { "u16", 2 },
+ { "u32", 4 },
+ { "u64", 8 },
+ { "s8", 1 },
+ { "s16", 2 },
+ { "s32", 4 },
+ { "s64", 8 },
+ { "char", 1 },
+ { },
+ };
+ int i;
+
+ for (i = 0; table[i].type; i++) {
+ if (!strcmp(table[i].type, name))
+ return table[i].size;
+ }
+
+ return 0;
+}
+
static int event_read_fields(struct event_format *event, struct format_field **fields)
{
struct format_field *field = NULL;
@@ -1233,6 +1260,8 @@
int count = 0;
do {
+ unsigned int size_dynamic = 0;
+
type = read_token(&token);
if (type == EVENT_NEWLINE) {
free_token(token);
@@ -1391,6 +1420,7 @@
field->type = new_type;
strcat(field->type, " ");
strcat(field->type, field->name);
+ size_dynamic = type_size(field->name);
free_token(field->name);
strcat(field->type, brackets);
field->name = token;
@@ -1463,7 +1493,8 @@
if (read_expect_type(EVENT_ITEM, &token))
goto fail;
- /* add signed type */
+ if (strtoul(token, NULL, 0))
+ field->flags |= FIELD_IS_SIGNED;
free_token(token);
if (read_expected(EVENT_OP, ";") < 0)
@@ -1478,10 +1509,14 @@
if (field->flags & FIELD_IS_ARRAY) {
if (field->arraylen)
field->elementsize = field->size / field->arraylen;
+ else if (field->flags & FIELD_IS_DYNAMIC)
+ field->elementsize = size_dynamic;
else if (field->flags & FIELD_IS_STRING)
field->elementsize = 1;
- else
- field->elementsize = event->pevent->long_size;
+ else if (field->flags & FIELD_IS_LONG)
+ field->elementsize = event->pevent ?
+ event->pevent->long_size :
+ sizeof(long);
} else
field->elementsize = field->size;
@@ -1785,6 +1820,8 @@
strcmp(token, "/") == 0 ||
strcmp(token, "<") == 0 ||
strcmp(token, ">") == 0 ||
+ strcmp(token, "<=") == 0 ||
+ strcmp(token, ">=") == 0 ||
strcmp(token, "==") == 0 ||
strcmp(token, "!=") == 0) {
@@ -2481,7 +2518,7 @@
free_token(token);
arg = alloc_arg();
- if (!field) {
+ if (!arg) {
do_warning("%s: not enough memory!", __func__);
*tok = NULL;
return EVENT_ERROR;
diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h
index 24a4bba..7be7e89 100644
--- a/tools/lib/traceevent/event-parse.h
+++ b/tools/lib/traceevent/event-parse.h
@@ -13,8 +13,7 @@
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
diff --git a/tools/lib/traceevent/event-utils.h b/tools/lib/traceevent/event-utils.h
index bc07500..e76c9ac 100644
--- a/tools/lib/traceevent/event-utils.h
+++ b/tools/lib/traceevent/event-utils.h
@@ -13,8 +13,7 @@
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c
index 5ea4326..2500e75 100644
--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -13,8 +13,7 @@
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
diff --git a/tools/lib/traceevent/parse-utils.c b/tools/lib/traceevent/parse-utils.c
index f023a13..bba701c 100644
--- a/tools/lib/traceevent/parse-utils.c
+++ b/tools/lib/traceevent/parse-utils.c
@@ -1,3 +1,22 @@
+/*
+ * Copyright (C) 2010 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation;
+ * version 2.1 of the License (not later!)
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
diff --git a/tools/lib/traceevent/trace-seq.c b/tools/lib/traceevent/trace-seq.c
index b1ccc92..a57db80 100644
--- a/tools/lib/traceevent/trace-seq.c
+++ b/tools/lib/traceevent/trace-seq.c
@@ -13,8 +13,7 @@
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * License along with this program; if not, see <http://www.gnu.org/licenses>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index ef6d22e..eb30044 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -222,10 +222,14 @@
#install-html: html
# '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),tags)
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) $(OUTPUT)PERF-VERSION-FILE
-include $(OUTPUT)PERF-VERSION-FILE
+endif
+endif
#
# Determine "include::" file references in asciidoc files.
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
index c8ffd9f..5ad07ef4 100644
--- a/tools/perf/Documentation/perf-annotate.txt
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -61,11 +61,13 @@
--stdio:: Use the stdio interface.
---tui:: Use the TUI interface Use of --tui requires a tty, if one is not
+--tui:: Use the TUI interface. Use of --tui requires a tty, if one is not
present, as when piping to other commands, the stdio interface is
used. This interfaces starts by centering on the line with more
samples, TAB/UNTAB cycles through the lines with more samples.
+--gtk:: Use the GTK interface.
+
-C::
--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
be provided as a comma-separated list with no space: 0,1. Ranges of
@@ -88,6 +90,9 @@
--objdump=<path>::
Path to objdump binary.
+--skip-missing::
+ Skip symbols that cannot be annotated.
+
SEE ALSO
--------
linkperf:perf-record[1], linkperf:perf-report[1]
diff --git a/tools/perf/Documentation/perf-buildid-cache.txt b/tools/perf/Documentation/perf-buildid-cache.txt
index c105770..e9a8349 100644
--- a/tools/perf/Documentation/perf-buildid-cache.txt
+++ b/tools/perf/Documentation/perf-buildid-cache.txt
@@ -24,6 +24,13 @@
-r::
--remove=::
Remove specified file from the cache.
+-M::
+--missing=::
+ List missing build ids in the cache for the specified file.
+-u::
+--update::
+ Update specified file of the cache. It can be used to update kallsyms
+ kernel dso to vmlinux in order to support annotation.
-v::
--verbose::
Be more verbose.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index 194f37d..5b3123d 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -22,10 +22,6 @@
OPTIONS
-------
--M::
---displacement::
- Show position displacement relative to baseline.
-
-D::
--dump-raw-trace::
Dump raw trace in ASCII.
diff --git a/tools/perf/Documentation/perf-evlist.txt b/tools/perf/Documentation/perf-evlist.txt
index 1521734..1ceb370 100644
--- a/tools/perf/Documentation/perf-evlist.txt
+++ b/tools/perf/Documentation/perf-evlist.txt
@@ -28,6 +28,10 @@
--verbose=::
Show all fields.
+-g::
+--group::
+ Show event group information.
+
SEE ALSO
--------
linkperf:perf-record[1], linkperf:perf-list[1],
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index f4d91be..02284a0 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -57,11 +57,44 @@
-s::
--sort=::
- Sort by key(s): pid, comm, dso, symbol, parent, srcline.
+ Sort histogram entries by given key(s) - multiple keys can be specified
+ in CSV format. Following sort keys are available:
+ pid, comm, dso, symbol, parent, cpu, srcline.
+
+ Each key has following meaning:
+
+ - comm: command (name) of the task which can be read via /proc/<pid>/comm
+ - pid: command and tid of the task
+ - dso: name of library or module executed at the time of sample
+ - symbol: name of function executed at the time of sample
+ - parent: name of function matched to the parent regex filter. Unmatched
+ entries are displayed as "[other]".
+ - cpu: cpu number the task ran at the time of sample
+ - srcline: filename and line number executed at the time of sample. The
+ DWARF debuggin info must be provided.
+
+ By default, comm, dso and symbol keys are used.
+ (i.e. --sort comm,dso,symbol)
+
+ If --branch-stack option is used, following sort keys are also
+ available:
+ dso_from, dso_to, symbol_from, symbol_to, mispredict.
+
+ - dso_from: name of library or module branched from
+ - dso_to: name of library or module branched to
+ - symbol_from: name of function branched from
+ - symbol_to: name of function branched to
+ - mispredict: "N" for predicted branch, "Y" for mispredicted branch
+
+ And default sort keys are changed to comm, dso_from, symbol_from, dso_to
+ and symbol_to, see '--branch-stack'.
-p::
--parent=<regex>::
- regex filter to identify parent, see: '--sort parent'
+ A regex filter to identify parent. The parent is a caller of this
+ function and searched through the callchain, thus it requires callchain
+ information recorded. The pattern is in the exteneded regex format and
+ defaults to "\^sys_|^do_page_fault", see '--sort parent'.
-x::
--exclude-other::
@@ -74,7 +107,6 @@
-t::
--field-separator=::
-
Use a special separator character and don't pad with spaces, replacing
all occurrences of this separator in symbol names (and other output)
with a '.' character, that thus it's the only non valid separator.
@@ -171,6 +203,9 @@
--objdump=<path>::
Path to objdump binary.
+--group::
+ Show event group information together.
+
SEE ALSO
--------
linkperf:perf-stat[1], linkperf:perf-annotate[1]
diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt
index a4027f2..9f1f054 100644
--- a/tools/perf/Documentation/perf-script-python.txt
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -336,7 +336,6 @@
----
root@tropicana:~# perf script -l
List of available trace scripts:
- workqueue-stats workqueue stats (ins/exe/create/destroy)
wakeup-latency system-wide min/max/avg wakeup latency
rw-by-file <comm> r/w activity for a program, by file
rw-by-pid system-wide r/w activity
@@ -402,7 +401,6 @@
----
root@tropicana:~# perf script -l
List of available trace scripts:
- workqueue-stats workqueue stats (ins/exe/create/destroy)
wakeup-latency system-wide min/max/avg wakeup latency
rw-by-file <comm> r/w activity for a program, by file
rw-by-pid system-wide r/w activity
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index cf0c310..faf4f4f 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -114,6 +114,17 @@
perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- make -s -j64 O=defconfig-build/ bzImage
+-I msecs::
+--interval-print msecs::
+ Print count deltas every N milliseconds (minimum: 100ms)
+ example: perf stat -I 1000 -e cycles -a sleep 5
+
+--aggr-socket::
+Aggregate counts per processor socket for system-wide mode measurements. This
+is a useful mode to detect imbalance between sockets. To enable this mode,
+use --aggr-socket in addition to -a. (system-wide). The output includes the
+socket number and the number of online processors on that socket. This is
+useful to gauge the amount of aggregation.
EXAMPLES
--------
diff --git a/tools/perf/Documentation/perf-test.txt b/tools/perf/Documentation/perf-test.txt
index b24ac40..d1d3e5121 100644
--- a/tools/perf/Documentation/perf-test.txt
+++ b/tools/perf/Documentation/perf-test.txt
@@ -23,6 +23,10 @@
OPTIONS
-------
+-s::
+--skip::
+ Tests to skip (comma separater numeric list).
+
-v::
--verbose::
Be more verbose.
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 5b80d84..a414bc9 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -60,7 +60,7 @@
-i::
--inherit::
- Child tasks inherit counters, only makes sens with -p option.
+ Child tasks do not inherit counters.
-k <path>::
--vmlinux=<path>::
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 8ab05e54..a2108ca 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -47,10 +47,11 @@
# backtrace post unwind.
#
# Define NO_BACKTRACE if you do not want stack backtrace debug feature
+#
+# Define NO_LIBNUMA if you do not want numa perf benchmark
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
--include $(OUTPUT)PERF-VERSION-FILE
uname_M := $(shell uname -m 2>/dev/null || echo not)
@@ -148,13 +149,25 @@
MKDIR = mkdir
FIND = find
INSTALL = install
+FLEX = flex
+BISON= bison
# sparse is architecture-neutral, which means that we need to tell it
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),tags)
-include config/feature-tests.mak
+ifeq ($(call get-executable,$(FLEX)),)
+ dummy := $(error Error: $(FLEX) is missing on this system, please install it)
+endif
+
+ifeq ($(call get-executable,$(BISON)),)
+ dummy := $(error Error: $(BISON) is missing on this system, please install it)
+endif
+
ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
@@ -206,6 +219,8 @@
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
BASIC_CFLAGS += -I.
endif
+endif # MAKECMDGOALS != tags
+endif # MAKECMDGOALS != clean
# Guard against environment variables
BUILTIN_OBJS =
@@ -230,11 +245,19 @@
LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
TE_LIB := -L$(TE_PATH) -ltraceevent
+export LIBTRACEEVENT
+
+# python extension build directories
+PYTHON_EXTBUILD := $(OUTPUT)python_ext_build/
+PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/
+PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/
+export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP
+
+python-clean := rm -rf $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so
+
PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py
-export LIBTRACEEVENT
-
$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
$(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \
--quiet build_ext; \
@@ -269,20 +292,17 @@
export PERL_PATH
-FLEX = flex
-BISON= bison
-
$(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(OUTPUT)util/parse-events-bison.c
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h $(PARSER_DEBUG_FLEX) -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
$(OUTPUT)util/parse-events-bison.c: util/parse-events.y
- $(QUIET_BISON)$(BISON) -v util/parse-events.y -d $(PARSER_DEBUG_BISON) -o $(OUTPUT)util/parse-events-bison.c
+ $(QUIET_BISON)$(BISON) -v util/parse-events.y -d $(PARSER_DEBUG_BISON) -o $(OUTPUT)util/parse-events-bison.c -p parse_events_
$(OUTPUT)util/pmu-flex.c: util/pmu.l $(OUTPUT)util/pmu-bison.c
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
$(OUTPUT)util/pmu-bison.c: util/pmu.y
- $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c
+ $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c -p perf_pmu_
$(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
$(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
@@ -378,8 +398,11 @@
LIB_H += util/intlist.h
LIB_H += util/perf_regs.h
LIB_H += util/unwind.h
-LIB_H += ui/helpline.h
LIB_H += util/vdso.h
+LIB_H += ui/helpline.h
+LIB_H += ui/progress.h
+LIB_H += ui/util.h
+LIB_H += ui/ui.h
LIB_OBJS += $(OUTPUT)util/abspath.o
LIB_OBJS += $(OUTPUT)util/alias.o
@@ -453,6 +476,7 @@
LIB_OBJS += $(OUTPUT)ui/setup.o
LIB_OBJS += $(OUTPUT)ui/helpline.o
LIB_OBJS += $(OUTPUT)ui/progress.o
+LIB_OBJS += $(OUTPUT)ui/util.o
LIB_OBJS += $(OUTPUT)ui/hist.o
LIB_OBJS += $(OUTPUT)ui/stdio/hist.o
@@ -471,7 +495,8 @@
LIB_OBJS += $(OUTPUT)tests/evsel-roundtrip-name.o
LIB_OBJS += $(OUTPUT)tests/evsel-tp-sched.o
LIB_OBJS += $(OUTPUT)tests/pmu.o
-LIB_OBJS += $(OUTPUT)tests/util.o
+LIB_OBJS += $(OUTPUT)tests/hists_link.o
+LIB_OBJS += $(OUTPUT)tests/python-use.o
BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
@@ -510,14 +535,13 @@
#
# Platform specific tweaks
#
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),tags)
# We choose to avoid "if .. else if .. else .. endif endif"
# because maintaining the nesting to match is a pain. If
# we had "elif" things would have been much nicer...
--include config.mak.autogen
--include config.mak
-
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
@@ -557,6 +581,11 @@
endif # SOURCE_LIBELF
endif # NO_LIBELF
+# There's only x86 (both 32 and 64) support for CFI unwind so far
+ifneq ($(ARCH),x86)
+ NO_LIBUNWIND := 1
+endif
+
ifndef NO_LIBUNWIND
# for linking with debug library, run like:
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
@@ -646,7 +675,6 @@
LIB_OBJS += $(OUTPUT)ui/browsers/hists.o
LIB_OBJS += $(OUTPUT)ui/browsers/map.o
LIB_OBJS += $(OUTPUT)ui/browsers/scripts.o
- LIB_OBJS += $(OUTPUT)ui/util.o
LIB_OBJS += $(OUTPUT)ui/tui/setup.o
LIB_OBJS += $(OUTPUT)ui/tui/util.o
LIB_OBJS += $(OUTPUT)ui/tui/helpline.o
@@ -655,9 +683,6 @@
LIB_H += ui/browsers/map.h
LIB_H += ui/keysyms.h
LIB_H += ui/libslang.h
- LIB_H += ui/progress.h
- LIB_H += ui/util.h
- LIB_H += ui/ui.h
endif
endif
@@ -673,14 +698,12 @@
BASIC_CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
EXTLIBS += $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
LIB_OBJS += $(OUTPUT)ui/gtk/browser.o
+ LIB_OBJS += $(OUTPUT)ui/gtk/hists.o
LIB_OBJS += $(OUTPUT)ui/gtk/setup.o
LIB_OBJS += $(OUTPUT)ui/gtk/util.o
LIB_OBJS += $(OUTPUT)ui/gtk/helpline.o
LIB_OBJS += $(OUTPUT)ui/gtk/progress.o
- # Make sure that it'd be included only once.
- ifeq ($(findstring -DNEWT_SUPPORT,$(BASIC_CFLAGS)),)
- LIB_OBJS += $(OUTPUT)ui/util.o
- endif
+ LIB_OBJS += $(OUTPUT)ui/gtk/annotate.o
endif
endif
@@ -707,7 +730,7 @@
define disable-python_code
BASIC_CFLAGS += -DNO_LIBPYTHON
$(if $(1),$(warning No $(1) was found))
- $(warning Python support won't be built)
+ $(warning Python support will not be built)
endef
override PYTHON := \
@@ -715,19 +738,10 @@
ifndef PYTHON
$(call disable-python,python interpreter)
- python-clean :=
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
- # python extension build directories
- PYTHON_EXTBUILD := $(OUTPUT)python_ext_build/
- PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/
- PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/
- export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP
-
- python-clean := rm -rf $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so
-
ifdef NO_LIBPYTHON
$(call disable-python)
else
@@ -839,10 +853,24 @@
endif
endif
+ifndef NO_LIBNUMA
+ FLAGS_LIBNUMA = $(ALL_CFLAGS) $(ALL_LDFLAGS) -lnuma
+ ifneq ($(call try-cc,$(SOURCE_LIBNUMA),$(FLAGS_LIBNUMA),libnuma),y)
+ msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numa-libs-devel or libnuma-dev);
+ else
+ BASIC_CFLAGS += -DLIBNUMA_SUPPORT
+ BUILTIN_OBJS += $(OUTPUT)bench/numa.o
+ EXTLIBS += -lnuma
+ endif
+endif
+
ifdef ASCIIDOC8
export ASCIIDOC8
endif
+endif # MAKECMDGOALS != tags
+endif # MAKECMDGOALS != clean
+
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
@@ -884,7 +912,7 @@
$(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf
$(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
- $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
+ $(QUIET_CC)$(CC) -include $(OUTPUT)PERF-VERSION-FILE \
'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
$(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
@@ -948,7 +976,13 @@
$(OUTPUT)tests/attr.o: tests/attr.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
- '-DBINDIR="$(bindir_SQ)"' \
+ '-DBINDIR="$(bindir_SQ)"' -DPYTHON='"$(PYTHON_WORD)"' \
+ $<
+
+$(OUTPUT)tests/python-use.o: tests/python-use.c $(OUTPUT)PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
+ -DPYTHONPATH='"$(OUTPUT)python"' \
+ -DPYTHON='"$(PYTHON_WORD)"' \
$<
$(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
@@ -1099,7 +1133,7 @@
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
-install: all try-install-man
+install-bin: all
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
@@ -1120,6 +1154,8 @@
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
$(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
+install: install-bin try-install-man
+
install-python_ext:
$(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)'
diff --git a/tools/perf/arch/common.c b/tools/perf/arch/common.c
index 3e975cb..aacef07 100644
--- a/tools/perf/arch/common.c
+++ b/tools/perf/arch/common.c
@@ -155,6 +155,7 @@
if (lookup_path(buf))
goto out;
free(buf);
+ buf = NULL;
}
if (!strcmp(arch, "arm"))
diff --git a/tools/perf/bench/bench.h b/tools/perf/bench/bench.h
index 8f89998..a5223e6 100644
--- a/tools/perf/bench/bench.h
+++ b/tools/perf/bench/bench.h
@@ -1,6 +1,7 @@
#ifndef BENCH_H
#define BENCH_H
+extern int bench_numa(int argc, const char **argv, const char *prefix);
extern int bench_sched_messaging(int argc, const char **argv, const char *prefix);
extern int bench_sched_pipe(int argc, const char **argv, const char *prefix);
extern int bench_mem_memcpy(int argc, const char **argv,
diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
new file mode 100644
index 0000000..30d1c32
--- /dev/null
+++ b/tools/perf/bench/numa.c
@@ -0,0 +1,1731 @@
+/*
+ * numa.c
+ *
+ * numa: Simulate NUMA-sensitive workload and measure their NUMA performance
+ */
+
+#include "../perf.h"
+#include "../builtin.h"
+#include "../util/util.h"
+#include "../util/parse-options.h"
+
+#include "bench.h"
+
+#include <errno.h>
+#include <sched.h>
+#include <stdio.h>
+#include <assert.h>
+#include <malloc.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <sys/mman.h>
+#include <sys/time.h>
+#include <sys/wait.h>
+#include <sys/prctl.h>
+#include <sys/types.h>
+
+#include <numa.h>
+#include <numaif.h>
+
+/*
+ * Regular printout to the terminal, supressed if -q is specified:
+ */
+#define tprintf(x...) do { if (g && g->p.show_details >= 0) printf(x); } while (0)
+
+/*
+ * Debug printf:
+ */
+#define dprintf(x...) do { if (g && g->p.show_details >= 1) printf(x); } while (0)
+
+struct thread_data {
+ int curr_cpu;
+ cpu_set_t bind_cpumask;
+ int bind_node;
+ u8 *process_data;
+ int process_nr;
+ int thread_nr;
+ int task_nr;
+ unsigned int loops_done;
+ u64 val;
+ u64 runtime_ns;
+ pthread_mutex_t *process_lock;
+};
+
+/* Parameters set by options: */
+
+struct params {
+ /* Startup synchronization: */
+ bool serialize_startup;
+
+ /* Task hierarchy: */
+ int nr_proc;
+ int nr_threads;
+
+ /* Working set sizes: */
+ const char *mb_global_str;
+ const char *mb_proc_str;
+ const char *mb_proc_locked_str;
+ const char *mb_thread_str;
+
+ double mb_global;
+ double mb_proc;
+ double mb_proc_locked;
+ double mb_thread;
+
+ /* Access patterns to the working set: */
+ bool data_reads;
+ bool data_writes;
+ bool data_backwards;
+ bool data_zero_memset;
+ bool data_rand_walk;
+ u32 nr_loops;
+ u32 nr_secs;
+ u32 sleep_usecs;
+
+ /* Working set initialization: */
+ bool init_zero;
+ bool init_random;
+ bool init_cpu0;
+
+ /* Misc options: */
+ int show_details;
+ int run_all;
+ int thp;
+
+ long bytes_global;
+ long bytes_process;
+ long bytes_process_locked;
+ long bytes_thread;
+
+ int nr_tasks;
+ bool show_quiet;
+
+ bool show_convergence;
+ bool measure_convergence;
+
+ int perturb_secs;
+ int nr_cpus;
+ int nr_nodes;
+
+ /* Affinity options -C and -N: */
+ char *cpu_list_str;
+ char *node_list_str;
+};
+
+
+/* Global, read-writable area, accessible to all processes and threads: */
+
+struct global_info {
+ u8 *data;
+
+ pthread_mutex_t startup_mutex;
+ int nr_tasks_started;
+
+ pthread_mutex_t startup_done_mutex;
+
+ pthread_mutex_t start_work_mutex;
+ int nr_tasks_working;
+
+ pthread_mutex_t stop_work_mutex;
+ u64 bytes_done;
+
+ struct thread_data *threads;
+
+ /* Convergence latency measurement: */
+ bool all_converged;
+ bool stop_work;
+
+ int print_once;
+
+ struct params p;
+};
+
+static struct global_info *g = NULL;
+
+static int parse_cpus_opt(const struct option *opt, const char *arg, int unset);
+static int parse_nodes_opt(const struct option *opt, const char *arg, int unset);
+
+struct params p0;
+
+static const struct option options[] = {
+ OPT_INTEGER('p', "nr_proc" , &p0.nr_proc, "number of processes"),
+ OPT_INTEGER('t', "nr_threads" , &p0.nr_threads, "number of threads per process"),
+
+ OPT_STRING('G', "mb_global" , &p0.mb_global_str, "MB", "global memory (MBs)"),
+ OPT_STRING('P', "mb_proc" , &p0.mb_proc_str, "MB", "process memory (MBs)"),
+ OPT_STRING('L', "mb_proc_locked", &p0.mb_proc_locked_str,"MB", "process serialized/locked memory access (MBs), <= process_memory"),
+ OPT_STRING('T', "mb_thread" , &p0.mb_thread_str, "MB", "thread memory (MBs)"),
+
+ OPT_UINTEGER('l', "nr_loops" , &p0.nr_loops, "max number of loops to run"),
+ OPT_UINTEGER('s', "nr_secs" , &p0.nr_secs, "max number of seconds to run"),
+ OPT_UINTEGER('u', "usleep" , &p0.sleep_usecs, "usecs to sleep per loop iteration"),
+
+ OPT_BOOLEAN('R', "data_reads" , &p0.data_reads, "access the data via writes (can be mixed with -W)"),
+ OPT_BOOLEAN('W', "data_writes" , &p0.data_writes, "access the data via writes (can be mixed with -R)"),
+ OPT_BOOLEAN('B', "data_backwards", &p0.data_backwards, "access the data backwards as well"),
+ OPT_BOOLEAN('Z', "data_zero_memset", &p0.data_zero_memset,"access the data via glibc bzero only"),
+ OPT_BOOLEAN('r', "data_rand_walk", &p0.data_rand_walk, "access the data with random (32bit LFSR) walk"),
+
+
+ OPT_BOOLEAN('z', "init_zero" , &p0.init_zero, "bzero the initial allocations"),
+ OPT_BOOLEAN('I', "init_random" , &p0.init_random, "randomize the contents of the initial allocations"),
+ OPT_BOOLEAN('0', "init_cpu0" , &p0.init_cpu0, "do the initial allocations on CPU#0"),
+ OPT_INTEGER('x', "perturb_secs", &p0.perturb_secs, "perturb thread 0/0 every X secs, to test convergence stability"),
+
+ OPT_INCR ('d', "show_details" , &p0.show_details, "Show details"),
+ OPT_INCR ('a', "all" , &p0.run_all, "Run all tests in the suite"),
+ OPT_INTEGER('H', "thp" , &p0.thp, "MADV_NOHUGEPAGE < 0 < MADV_HUGEPAGE"),
+ OPT_BOOLEAN('c', "show_convergence", &p0.show_convergence, "show convergence details"),
+ OPT_BOOLEAN('m', "measure_convergence", &p0.measure_convergence, "measure convergence latency"),
+ OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "bzero the initial allocations"),
+ OPT_BOOLEAN('S', "serialize-startup", &p0.serialize_startup,"serialize thread startup"),
+
+ /* Special option string parsing callbacks: */
+ OPT_CALLBACK('C', "cpus", NULL, "cpu[,cpu2,...cpuN]",
+ "bind the first N tasks to these specific cpus (the rest is unbound)",
+ parse_cpus_opt),
+ OPT_CALLBACK('M', "memnodes", NULL, "node[,node2,...nodeN]",
+ "bind the first N tasks to these specific memory nodes (the rest is unbound)",
+ parse_nodes_opt),
+ OPT_END()
+};
+
+static const char * const bench_numa_usage[] = {
+ "perf bench numa <options>",
+ NULL
+};
+
+static const char * const numa_usage[] = {
+ "perf bench numa mem [<options>]",
+ NULL
+};
+
+static cpu_set_t bind_to_cpu(int target_cpu)
+{
+ cpu_set_t orig_mask, mask;
+ int ret;
+
+ ret = sched_getaffinity(0, sizeof(orig_mask), &orig_mask);
+ BUG_ON(ret);
+
+ CPU_ZERO(&mask);
+
+ if (target_cpu == -1) {
+ int cpu;
+
+ for (cpu = 0; cpu < g->p.nr_cpus; cpu++)
+ CPU_SET(cpu, &mask);
+ } else {
+ BUG_ON(target_cpu < 0 || target_cpu >= g->p.nr_cpus);
+ CPU_SET(target_cpu, &mask);
+ }
+
+ ret = sched_setaffinity(0, sizeof(mask), &mask);
+ BUG_ON(ret);
+
+ return orig_mask;
+}
+
+static cpu_set_t bind_to_node(int target_node)
+{
+ int cpus_per_node = g->p.nr_cpus/g->p.nr_nodes;
+ cpu_set_t orig_mask, mask;
+ int cpu;
+ int ret;
+
+ BUG_ON(cpus_per_node*g->p.nr_nodes != g->p.nr_cpus);
+ BUG_ON(!cpus_per_node);
+
+ ret = sched_getaffinity(0, sizeof(orig_mask), &orig_mask);
+ BUG_ON(ret);
+
+ CPU_ZERO(&mask);
+
+ if (target_node == -1) {
+ for (cpu = 0; cpu < g->p.nr_cpus; cpu++)
+ CPU_SET(cpu, &mask);
+ } else {
+ int cpu_start = (target_node + 0) * cpus_per_node;
+ int cpu_stop = (target_node + 1) * cpus_per_node;
+
+ BUG_ON(cpu_stop > g->p.nr_cpus);
+
+ for (cpu = cpu_start; cpu < cpu_stop; cpu++)
+ CPU_SET(cpu, &mask);
+ }
+
+ ret = sched_setaffinity(0, sizeof(mask), &mask);
+ BUG_ON(ret);
+
+ return orig_mask;
+}
+
+static void bind_to_cpumask(cpu_set_t mask)
+{
+ int ret;
+
+ ret = sched_setaffinity(0, sizeof(mask), &mask);
+ BUG_ON(ret);
+}
+
+static void mempol_restore(void)
+{
+ int ret;
+
+ ret = set_mempolicy(MPOL_DEFAULT, NULL, g->p.nr_nodes-1);
+
+ BUG_ON(ret);
+}
+
+static void bind_to_memnode(int node)
+{
+ unsigned long nodemask;
+ int ret;
+
+ if (node == -1)
+ return;
+
+ BUG_ON(g->p.nr_nodes > (int)sizeof(nodemask));
+ nodemask = 1L << node;
+
+ ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)*8);
+ dprintf("binding to node %d, mask: %016lx => %d\n", node, nodemask, ret);
+
+ BUG_ON(ret);
+}
+
+#define HPSIZE (2*1024*1024)
+
+#define set_taskname(fmt...) \
+do { \
+ char name[20]; \
+ \
+ snprintf(name, 20, fmt); \
+ prctl(PR_SET_NAME, name); \
+} while (0)
+
+static u8 *alloc_data(ssize_t bytes0, int map_flags,
+ int init_zero, int init_cpu0, int thp, int init_random)
+{
+ cpu_set_t orig_mask;
+ ssize_t bytes;
+ u8 *buf;
+ int ret;
+
+ if (!bytes0)
+ return NULL;
+
+ /* Allocate and initialize all memory on CPU#0: */
+ if (init_cpu0) {
+ orig_mask = bind_to_node(0);
+ bind_to_memnode(0);
+ }
+
+ bytes = bytes0 + HPSIZE;
+
+ buf = (void *)mmap(0, bytes, PROT_READ|PROT_WRITE, MAP_ANON|map_flags, -1, 0);
+ BUG_ON(buf == (void *)-1);
+
+ if (map_flags == MAP_PRIVATE) {
+ if (thp > 0) {
+ ret = madvise(buf, bytes, MADV_HUGEPAGE);
+ if (ret && !g->print_once) {
+ g->print_once = 1;
+ printf("WARNING: Could not enable THP - do: 'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled'\n");
+ }
+ }
+ if (thp < 0) {
+ ret = madvise(buf, bytes, MADV_NOHUGEPAGE);
+ if (ret && !g->print_once) {
+ g->print_once = 1;
+ printf("WARNING: Could not disable THP: run a CONFIG_TRANSPARENT_HUGEPAGE kernel?\n");
+ }
+ }
+ }
+
+ if (init_zero) {
+ bzero(buf, bytes);
+ } else {
+ /* Initialize random contents, different in each word: */
+ if (init_random) {
+ u64 *wbuf = (void *)buf;
+ long off = rand();
+ long i;
+
+ for (i = 0; i < bytes/8; i++)
+ wbuf[i] = i + off;
+ }
+ }
+
+ /* Align to 2MB boundary: */
+ buf = (void *)(((unsigned long)buf + HPSIZE-1) & ~(HPSIZE-1));
+
+ /* Restore affinity: */
+ if (init_cpu0) {
+ bind_to_cpumask(orig_mask);
+ mempol_restore();
+ }
+
+ return buf;
+}
+
+static void free_data(void *data, ssize_t bytes)
+{
+ int ret;
+
+ if (!data)
+ return;
+
+ ret = munmap(data, bytes);
+ BUG_ON(ret);
+}
+
+/*
+ * Create a shared memory buffer that can be shared between processes, zeroed:
+ */
+static void * zalloc_shared_data(ssize_t bytes)
+{
+ return alloc_data(bytes, MAP_SHARED, 1, g->p.init_cpu0, g->p.thp, g->p.init_random);
+}
+
+/*
+ * Create a shared memory buffer that can be shared between processes:
+ */
+static void * setup_shared_data(ssize_t bytes)
+{
+ return alloc_data(bytes, MAP_SHARED, 0, g->p.init_cpu0, g->p.thp, g->p.init_random);
+}
+
+/*
+ * Allocate process-local memory - this will either be shared between
+ * threads of this process, or only be accessed by this thread:
+ */
+static void * setup_private_data(ssize_t bytes)
+{
+ return alloc_data(bytes, MAP_PRIVATE, 0, g->p.init_cpu0, g->p.thp, g->p.init_random);
+}
+
+/*
+ * Return a process-shared (global) mutex:
+ */
+static void init_global_mutex(pthread_mutex_t *mutex)
+{
+ pthread_mutexattr_t attr;
+
+ pthread_mutexattr_init(&attr);
+ pthread_mutexattr_setpshared(&attr, PTHREAD_PROCESS_SHARED);
+ pthread_mutex_init(mutex, &attr);
+}
+
+static int parse_cpu_list(const char *arg)
+{
+ p0.cpu_list_str = strdup(arg);
+
+ dprintf("got CPU list: {%s}\n", p0.cpu_list_str);
+
+ return 0;
+}
+
+static void parse_setup_cpu_list(void)
+{
+ struct thread_data *td;
+ char *str0, *str;
+ int t;
+
+ if (!g->p.cpu_list_str)
+ return;
+
+ dprintf("g->p.nr_tasks: %d\n", g->p.nr_tasks);
+
+ str0 = str = strdup(g->p.cpu_list_str);
+ t = 0;
+
+ BUG_ON(!str);
+
+ tprintf("# binding tasks to CPUs:\n");
+ tprintf("# ");
+
+ while (true) {
+ int bind_cpu, bind_cpu_0, bind_cpu_1;
+ char *tok, *tok_end, *tok_step, *tok_len, *tok_mul;
+ int bind_len;
+ int step;
+ int mul;
+
+ tok = strsep(&str, ",");
+ if (!tok)
+ break;
+
+ tok_end = strstr(tok, "-");
+
+ dprintf("\ntoken: {%s}, end: {%s}\n", tok, tok_end);
+ if (!tok_end) {
+ /* Single CPU specified: */
+ bind_cpu_0 = bind_cpu_1 = atol(tok);
+ } else {
+ /* CPU range specified (for example: "5-11"): */
+ bind_cpu_0 = atol(tok);
+ bind_cpu_1 = atol(tok_end + 1);
+ }
+
+ step = 1;
+ tok_step = strstr(tok, "#");
+ if (tok_step) {
+ step = atol(tok_step + 1);
+ BUG_ON(step <= 0 || step >= g->p.nr_cpus);
+ }
+
+ /*
+ * Mask length.
+ * Eg: "--cpus 8_4-16#4" means: '--cpus 8_4,12_4,16_4',
+ * where the _4 means the next 4 CPUs are allowed.
+ */
+ bind_len = 1;
+ tok_len = strstr(tok, "_");
+ if (tok_len) {
+ bind_len = atol(tok_len + 1);
+ BUG_ON(bind_len <= 0 || bind_len > g->p.nr_cpus);
+ }
+
+ /* Multiplicator shortcut, "0x8" is a shortcut for: "0,0,0,0,0,0,0,0" */
+ mul = 1;
+ tok_mul = strstr(tok, "x");
+ if (tok_mul) {
+ mul = atol(tok_mul + 1);
+ BUG_ON(mul <= 0);
+ }
+
+ dprintf("CPUs: %d_%d-%d#%dx%d\n", bind_cpu_0, bind_len, bind_cpu_1, step, mul);
+
+ BUG_ON(bind_cpu_0 < 0 || bind_cpu_0 >= g->p.nr_cpus);
+ BUG_ON(bind_cpu_1 < 0 || bind_cpu_1 >= g->p.nr_cpus);
+ BUG_ON(bind_cpu_0 > bind_cpu_1);
+
+ for (bind_cpu = bind_cpu_0; bind_cpu <= bind_cpu_1; bind_cpu += step) {
+ int i;
+
+ for (i = 0; i < mul; i++) {
+ int cpu;
+
+ if (t >= g->p.nr_tasks) {
+ printf("\n# NOTE: ignoring bind CPUs starting at CPU#%d\n #", bind_cpu);
+ goto out;
+ }
+ td = g->threads + t;
+
+ if (t)
+ tprintf(",");
+ if (bind_len > 1) {
+ tprintf("%2d/%d", bind_cpu, bind_len);
+ } else {
+ tprintf("%2d", bind_cpu);
+ }
+
+ CPU_ZERO(&td->bind_cpumask);
+ for (cpu = bind_cpu; cpu < bind_cpu+bind_len; cpu++) {
+ BUG_ON(cpu < 0 || cpu >= g->p.nr_cpus);
+ CPU_SET(cpu, &td->bind_cpumask);
+ }
+ t++;
+ }
+ }
+ }
+out:
+
+ tprintf("\n");
+
+ if (t < g->p.nr_tasks)
+ printf("# NOTE: %d tasks bound, %d tasks unbound\n", t, g->p.nr_tasks - t);
+
+ free(str0);
+}
+
+static int parse_cpus_opt(const struct option *opt __maybe_unused,
+ const char *arg, int unset __maybe_unused)
+{
+ if (!arg)
+ return -1;
+
+ return parse_cpu_list(arg);
+}
+
+static int parse_node_list(const char *arg)
+{
+ p0.node_list_str = strdup(arg);
+
+ dprintf("got NODE list: {%s}\n", p0.node_list_str);
+
+ return 0;
+}
+
+static void parse_setup_node_list(void)
+{
+ struct thread_data *td;
+ char *str0, *str;
+ int t;
+
+ if (!g->p.node_list_str)
+ return;
+
+ dprintf("g->p.nr_tasks: %d\n", g->p.nr_tasks);
+
+ str0 = str = strdup(g->p.node_list_str);
+ t = 0;
+
+ BUG_ON(!str);
+
+ tprintf("# binding tasks to NODEs:\n");
+ tprintf("# ");
+
+ while (true) {
+ int bind_node, bind_node_0, bind_node_1;
+ char *tok, *tok_end, *tok_step, *tok_mul;
+ int step;
+ int mul;
+
+ tok = strsep(&str, ",");
+ if (!tok)
+ break;
+
+ tok_end = strstr(tok, "-");
+
+ dprintf("\ntoken: {%s}, end: {%s}\n", tok, tok_end);
+ if (!tok_end) {
+ /* Single NODE specified: */
+ bind_node_0 = bind_node_1 = atol(tok);
+ } else {
+ /* NODE range specified (for example: "5-11"): */
+ bind_node_0 = atol(tok);
+ bind_node_1 = atol(tok_end + 1);
+ }
+
+ step = 1;
+ tok_step = strstr(tok, "#");
+ if (tok_step) {
+ step = atol(tok_step + 1);
+ BUG_ON(step <= 0 || step >= g->p.nr_nodes);
+ }
+
+ /* Multiplicator shortcut, "0x8" is a shortcut for: "0,0,0,0,0,0,0,0" */
+ mul = 1;
+ tok_mul = strstr(tok, "x");
+ if (tok_mul) {
+ mul = atol(tok_mul + 1);
+ BUG_ON(mul <= 0);
+ }
+
+ dprintf("NODEs: %d-%d #%d\n", bind_node_0, bind_node_1, step);
+
+ BUG_ON(bind_node_0 < 0 || bind_node_0 >= g->p.nr_nodes);
+ BUG_ON(bind_node_1 < 0 || bind_node_1 >= g->p.nr_nodes);
+ BUG_ON(bind_node_0 > bind_node_1);
+
+ for (bind_node = bind_node_0; bind_node <= bind_node_1; bind_node += step) {
+ int i;
+
+ for (i = 0; i < mul; i++) {
+ if (t >= g->p.nr_tasks) {
+ printf("\n# NOTE: ignoring bind NODEs starting at NODE#%d\n", bind_node);
+ goto out;
+ }
+ td = g->threads + t;
+
+ if (!t)
+ tprintf(" %2d", bind_node);
+ else
+ tprintf(",%2d", bind_node);
+
+ td->bind_node = bind_node;
+ t++;
+ }
+ }
+ }
+out:
+
+ tprintf("\n");
+
+ if (t < g->p.nr_tasks)
+ printf("# NOTE: %d tasks mem-bound, %d tasks unbound\n", t, g->p.nr_tasks - t);
+
+ free(str0);
+}
+
+static int parse_nodes_opt(const struct option *opt __maybe_unused,
+ const char *arg, int unset __maybe_unused)
+{
+ if (!arg)
+ return -1;
+
+ return parse_node_list(arg);
+
+ return 0;
+}
+
+#define BIT(x) (1ul << x)
+
+static inline uint32_t lfsr_32(uint32_t lfsr)
+{
+ const uint32_t taps = BIT(1) | BIT(5) | BIT(6) | BIT(31);
+ return (lfsr>>1) ^ ((0x0u - (lfsr & 0x1u)) & taps);
+}
+
+/*
+ * Make sure there's real data dependency to RAM (when read
+ * accesses are enabled), so the compiler, the CPU and the
+ * kernel (KSM, zero page, etc.) cannot optimize away RAM
+ * accesses:
+ */
+static inline u64 access_data(u64 *data __attribute__((unused)), u64 val)
+{
+ if (g->p.data_reads)
+ val += *data;
+ if (g->p.data_writes)
+ *data = val + 1;
+ return val;
+}
+
+/*
+ * The worker process does two types of work, a forwards going
+ * loop and a backwards going loop.
+ *
+ * We do this so that on multiprocessor systems we do not create
+ * a 'train' of processing, with highly synchronized processes,
+ * skewing the whole benchmark.
+ */
+static u64 do_work(u8 *__data, long bytes, int nr, int nr_max, int loop, u64 val)
+{
+ long words = bytes/sizeof(u64);
+ u64 *data = (void *)__data;
+ long chunk_0, chunk_1;
+ u64 *d0, *d, *d1;
+ long off;
+ long i;
+
+ BUG_ON(!data && words);
+ BUG_ON(data && !words);
+
+ if (!data)
+ return val;
+
+ /* Very simple memset() work variant: */
+ if (g->p.data_zero_memset && !g->p.data_rand_walk) {
+ bzero(data, bytes);
+ return val;
+ }
+
+ /* Spread out by PID/TID nr and by loop nr: */
+ chunk_0 = words/nr_max;
+ chunk_1 = words/g->p.nr_loops;
+ off = nr*chunk_0 + loop*chunk_1;
+
+ while (off >= words)
+ off -= words;
+
+ if (g->p.data_rand_walk) {
+ u32 lfsr = nr + loop + val;
+ int j;
+
+ for (i = 0; i < words/1024; i++) {
+ long start, end;
+
+ lfsr = lfsr_32(lfsr);
+
+ start = lfsr % words;
+ end = min(start + 1024, words-1);
+
+ if (g->p.data_zero_memset) {
+ bzero(data + start, (end-start) * sizeof(u64));
+ } else {
+ for (j = start; j < end; j++)
+ val = access_data(data + j, val);
+ }
+ }
+ } else if (!g->p.data_backwards || (nr + loop) & 1) {
+
+ d0 = data + off;
+ d = data + off + 1;
+ d1 = data + words;
+
+ /* Process data forwards: */
+ for (;;) {
+ if (unlikely(d >= d1))
+ d = data;
+ if (unlikely(d == d0))
+ break;
+
+ val = access_data(d, val);
+
+ d++;
+ }
+ } else {
+ /* Process data backwards: */
+
+ d0 = data + off;
+ d = data + off - 1;
+ d1 = data + words;
+
+ /* Process data forwards: */
+ for (;;) {
+ if (unlikely(d < data))
+ d = data + words-1;
+ if (unlikely(d == d0))
+ break;
+
+ val = access_data(d, val);
+
+ d--;
+ }
+ }
+
+ return val;
+}
+
+static void update_curr_cpu(int task_nr, unsigned long bytes_worked)
+{
+ unsigned int cpu;
+
+ cpu = sched_getcpu();
+
+ g->threads[task_nr].curr_cpu = cpu;
+ prctl(0, bytes_worked);
+}
+
+#define MAX_NR_NODES 64
+
+/*
+ * Count the number of nodes a process's threads
+ * are spread out on.
+ *
+ * A count of 1 means that the process is compressed
+ * to a single node. A count of g->p.nr_nodes means it's
+ * spread out on the whole system.
+ */
+static int count_process_nodes(int process_nr)
+{
+ char node_present[MAX_NR_NODES] = { 0, };
+ int nodes;
+ int n, t;
+
+ for (t = 0; t < g->p.nr_threads; t++) {
+ struct thread_data *td;
+ int task_nr;
+ int node;
+
+ task_nr = process_nr*g->p.nr_threads + t;
+ td = g->threads + task_nr;
+
+ node = numa_node_of_cpu(td->curr_cpu);
+ node_present[node] = 1;
+ }
+
+ nodes = 0;
+
+ for (n = 0; n < MAX_NR_NODES; n++)
+ nodes += node_present[n];
+
+ return nodes;
+}
+
+/*
+ * Count the number of distinct process-threads a node contains.
+ *
+ * A count of 1 means that the node contains only a single
+ * process. If all nodes on the system contain at most one
+ * process then we are well-converged.
+ */
+static int count_node_processes(int node)
+{
+ int processes = 0;
+ int t, p;
+
+ for (p = 0; p < g->p.nr_proc; p++) {
+ for (t = 0; t < g->p.nr_threads; t++) {
+ struct thread_data *td;
+ int task_nr;
+ int n;
+
+ task_nr = p*g->p.nr_threads + t;
+ td = g->threads + task_nr;
+
+ n = numa_node_of_cpu(td->curr_cpu);
+ if (n == node) {
+ processes++;
+ break;
+ }
+ }
+ }
+
+ return processes;
+}
+
+static void calc_convergence_compression(int *strong)
+{
+ unsigned int nodes_min, nodes_max;
+ int p;
+
+ nodes_min = -1;
+ nodes_max = 0;
+
+ for (p = 0; p < g->p.nr_proc; p++) {
+ unsigned int nodes = count_process_nodes(p);
+
+ nodes_min = min(nodes, nodes_min);
+ nodes_max = max(nodes, nodes_max);
+ }
+
+ /* Strong convergence: all threads compress on a single node: */
+ if (nodes_min == 1 && nodes_max == 1) {
+ *strong = 1;
+ } else {
+ *strong = 0;
+ tprintf(" {%d-%d}", nodes_min, nodes_max);
+ }
+}
+
+static void calc_convergence(double runtime_ns_max, double *convergence)
+{
+ unsigned int loops_done_min, loops_done_max;
+ int process_groups;
+ int nodes[MAX_NR_NODES];
+ int distance;
+ int nr_min;
+ int nr_max;
+ int strong;
+ int sum;
+ int nr;
+ int node;
+ int cpu;
+ int t;
+
+ if (!g->p.show_convergence && !g->p.measure_convergence)
+ return;
+
+ for (node = 0; node < g->p.nr_nodes; node++)
+ nodes[node] = 0;
+
+ loops_done_min = -1;
+ loops_done_max = 0;
+
+ for (t = 0; t < g->p.nr_tasks; t++) {
+ struct thread_data *td = g->threads + t;
+ unsigned int loops_done;
+
+ cpu = td->curr_cpu;
+
+ /* Not all threads have written it yet: */
+ if (cpu < 0)
+ continue;
+
+ node = numa_node_of_cpu(cpu);
+
+ nodes[node]++;
+
+ loops_done = td->loops_done;
+ loops_done_min = min(loops_done, loops_done_min);
+ loops_done_max = max(loops_done, loops_done_max);
+ }
+
+ nr_max = 0;
+ nr_min = g->p.nr_tasks;
+ sum = 0;
+
+ for (node = 0; node < g->p.nr_nodes; node++) {
+ nr = nodes[node];
+ nr_min = min(nr, nr_min);
+ nr_max = max(nr, nr_max);
+ sum += nr;
+ }
+ BUG_ON(nr_min > nr_max);
+
+ BUG_ON(sum > g->p.nr_tasks);
+
+ if (0 && (sum < g->p.nr_tasks))
+ return;
+
+ /*
+ * Count the number of distinct process groups present
+ * on nodes - when we are converged this will decrease
+ * to g->p.nr_proc:
+ */
+ process_groups = 0;
+
+ for (node = 0; node < g->p.nr_nodes; node++) {
+ int processes = count_node_processes(node);
+
+ nr = nodes[node];
+ tprintf(" %2d/%-2d", nr, processes);
+
+ process_groups += processes;
+ }
+
+ distance = nr_max - nr_min;
+
+ tprintf(" [%2d/%-2d]", distance, process_groups);
+
+ tprintf(" l:%3d-%-3d (%3d)",
+ loops_done_min, loops_done_max, loops_done_max-loops_done_min);
+
+ if (loops_done_min && loops_done_max) {
+ double skew = 1.0 - (double)loops_done_min/loops_done_max;
+
+ tprintf(" [%4.1f%%]", skew * 100.0);
+ }
+
+ calc_convergence_compression(&strong);
+
+ if (strong && process_groups == g->p.nr_proc) {
+ if (!*convergence) {
+ *convergence = runtime_ns_max;
+ tprintf(" (%6.1fs converged)\n", *convergence/1e9);
+ if (g->p.measure_convergence) {
+ g->all_converged = true;
+ g->stop_work = true;
+ }
+ }
+ } else {
+ if (*convergence) {
+ tprintf(" (%6.1fs de-converged)", runtime_ns_max/1e9);
+ *convergence = 0;
+ }
+ tprintf("\n");
+ }
+}
+
+static void show_summary(double runtime_ns_max, int l, double *convergence)
+{
+ tprintf("\r # %5.1f%% [%.1f mins]",
+ (double)(l+1)/g->p.nr_loops*100.0, runtime_ns_max/1e9 / 60.0);
+
+ calc_convergence(runtime_ns_max, convergence);
+
+ if (g->p.show_details >= 0)
+ fflush(stdout);
+}
+
+static void *worker_thread(void *__tdata)
+{
+ struct thread_data *td = __tdata;
+ struct timeval start0, start, stop, diff;
+ int process_nr = td->process_nr;
+ int thread_nr = td->thread_nr;
+ unsigned long last_perturbance;
+ int task_nr = td->task_nr;
+ int details = g->p.show_details;
+ int first_task, last_task;
+ double convergence = 0;
+ u64 val = td->val;
+ double runtime_ns_max;
+ u8 *global_data;
+ u8 *process_data;
+ u8 *thread_data;
+ u64 bytes_done;
+ long work_done;
+ u32 l;
+
+ bind_to_cpumask(td->bind_cpumask);
+ bind_to_memnode(td->bind_node);
+
+ set_taskname("thread %d/%d", process_nr, thread_nr);
+
+ global_data = g->data;
+ process_data = td->process_data;
+ thread_data = setup_private_data(g->p.bytes_thread);
+
+ bytes_done = 0;
+
+ last_task = 0;
+ if (process_nr == g->p.nr_proc-1 && thread_nr == g->p.nr_threads-1)
+ last_task = 1;
+
+ first_task = 0;
+ if (process_nr == 0 && thread_nr == 0)
+ first_task = 1;
+
+ if (details >= 2) {
+ printf("# thread %2d / %2d global mem: %p, process mem: %p, thread mem: %p\n",
+ process_nr, thread_nr, global_data, process_data, thread_data);
+ }
+
+ if (g->p.serialize_startup) {
+ pthread_mutex_lock(&g->startup_mutex);
+ g->nr_tasks_started++;
+ pthread_mutex_unlock(&g->startup_mutex);
+
+ /* Here we will wait for the main process to start us all at once: */
+ pthread_mutex_lock(&g->start_work_mutex);
+ g->nr_tasks_working++;
+
+ /* Last one wake the main process: */
+ if (g->nr_tasks_working == g->p.nr_tasks)
+ pthread_mutex_unlock(&g->startup_done_mutex);
+
+ pthread_mutex_unlock(&g->start_work_mutex);
+ }
+
+ gettimeofday(&start0, NULL);
+
+ start = stop = start0;
+ last_perturbance = start.tv_sec;
+
+ for (l = 0; l < g->p.nr_loops; l++) {
+ start = stop;
+
+ if (g->stop_work)
+ break;
+
+ val += do_work(global_data, g->p.bytes_global, process_nr, g->p.nr_proc, l, val);
+ val += do_work(process_data, g->p.bytes_process, thread_nr, g->p.nr_threads, l, val);
+ val += do_work(thread_data, g->p.bytes_thread, 0, 1, l, val);
+
+ if (g->p.sleep_usecs) {
+ pthread_mutex_lock(td->process_lock);
+ usleep(g->p.sleep_usecs);
+ pthread_mutex_unlock(td->process_lock);
+ }
+ /*
+ * Amount of work to be done under a process-global lock:
+ */
+ if (g->p.bytes_process_locked) {
+ pthread_mutex_lock(td->process_lock);
+ val += do_work(process_data, g->p.bytes_process_locked, thread_nr, g->p.nr_threads, l, val);
+ pthread_mutex_unlock(td->process_lock);
+ }
+
+ work_done = g->p.bytes_global + g->p.bytes_process +
+ g->p.bytes_process_locked + g->p.bytes_thread;
+
+ update_curr_cpu(task_nr, work_done);
+ bytes_done += work_done;
+
+ if (details < 0 && !g->p.perturb_secs && !g->p.measure_convergence && !g->p.nr_secs)
+ continue;
+
+ td->loops_done = l;
+
+ gettimeofday(&stop, NULL);
+
+ /* Check whether our max runtime timed out: */
+ if (g->p.nr_secs) {
+ timersub(&stop, &start0, &diff);
+ if (diff.tv_sec >= g->p.nr_secs) {
+ g->stop_work = true;
+ break;
+ }
+ }
+
+ /* Update the summary at most once per second: */
+ if (start.tv_sec == stop.tv_sec)
+ continue;
+
+ /*
+ * Perturb the first task's equilibrium every g->p.perturb_secs seconds,
+ * by migrating to CPU#0:
+ */
+ if (first_task && g->p.perturb_secs && (int)(stop.tv_sec - last_perturbance) >= g->p.perturb_secs) {
+ cpu_set_t orig_mask;
+ int target_cpu;
+ int this_cpu;
+
+ last_perturbance = stop.tv_sec;
+
+ /*
+ * Depending on where we are running, move into
+ * the other half of the system, to create some
+ * real disturbance:
+ */
+ this_cpu = g->threads[task_nr].curr_cpu;
+ if (this_cpu < g->p.nr_cpus/2)
+ target_cpu = g->p.nr_cpus-1;
+ else
+ target_cpu = 0;
+
+ orig_mask = bind_to_cpu(target_cpu);
+
+ /* Here we are running on the target CPU already */
+ if (details >= 1)
+ printf(" (injecting perturbalance, moved to CPU#%d)\n", target_cpu);
+
+ bind_to_cpumask(orig_mask);
+ }
+
+ if (details >= 3) {
+ timersub(&stop, &start, &diff);
+ runtime_ns_max = diff.tv_sec * 1000000000;
+ runtime_ns_max += diff.tv_usec * 1000;
+
+ if (details >= 0) {
+ printf(" #%2d / %2d: %14.2lf nsecs/op [val: %016lx]\n",
+ process_nr, thread_nr, runtime_ns_max / bytes_done, val);
+ }
+ fflush(stdout);
+ }
+ if (!last_task)
+ continue;
+
+ timersub(&stop, &start0, &diff);
+ runtime_ns_max = diff.tv_sec * 1000000000ULL;
+ runtime_ns_max += diff.tv_usec * 1000ULL;
+
+ show_summary(runtime_ns_max, l, &convergence);
+ }
+
+ gettimeofday(&stop, NULL);
+ timersub(&stop, &start0, &diff);
+ td->runtime_ns = diff.tv_sec * 1000000000ULL;
+ td->runtime_ns += diff.tv_usec * 1000ULL;
+
+ free_data(thread_data, g->p.bytes_thread);
+
+ pthread_mutex_lock(&g->stop_work_mutex);
+ g->bytes_done += bytes_done;
+ pthread_mutex_unlock(&g->stop_work_mutex);
+
+ return NULL;
+}
+
+/*
+ * A worker process starts a couple of threads:
+ */
+static void worker_process(int process_nr)
+{
+ pthread_mutex_t process_lock;
+ struct thread_data *td;
+ pthread_t *pthreads;
+ u8 *process_data;
+ int task_nr;
+ int ret;
+ int t;
+
+ pthread_mutex_init(&process_lock, NULL);
+ set_taskname("process %d", process_nr);
+
+ /*
+ * Pick up the memory policy and the CPU binding of our first thread,
+ * so that we initialize memory accordingly:
+ */
+ task_nr = process_nr*g->p.nr_threads;
+ td = g->threads + task_nr;
+
+ bind_to_memnode(td->bind_node);
+ bind_to_cpumask(td->bind_cpumask);
+
+ pthreads = zalloc(g->p.nr_threads * sizeof(pthread_t));
+ process_data = setup_private_data(g->p.bytes_process);
+
+ if (g->p.show_details >= 3) {
+ printf(" # process %2d global mem: %p, process mem: %p\n",
+ process_nr, g->data, process_data);
+ }
+
+ for (t = 0; t < g->p.nr_threads; t++) {
+ task_nr = process_nr*g->p.nr_threads + t;
+ td = g->threads + task_nr;
+
+ td->process_data = process_data;
+ td->process_nr = process_nr;
+ td->thread_nr = t;
+ td->task_nr = task_nr;
+ td->val = rand();
+ td->curr_cpu = -1;
+ td->process_lock = &process_lock;
+
+ ret = pthread_create(pthreads + t, NULL, worker_thread, td);
+ BUG_ON(ret);
+ }
+
+ for (t = 0; t < g->p.nr_threads; t++) {
+ ret = pthread_join(pthreads[t], NULL);
+ BUG_ON(ret);
+ }
+
+ free_data(process_data, g->p.bytes_process);
+ free(pthreads);
+}
+
+static void print_summary(void)
+{
+ if (g->p.show_details < 0)
+ return;
+
+ printf("\n ###\n");
+ printf(" # %d %s will execute (on %d nodes, %d CPUs):\n",
+ g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", g->p.nr_nodes, g->p.nr_cpus);
+ printf(" # %5dx %5ldMB global shared mem operations\n",
+ g->p.nr_loops, g->p.bytes_global/1024/1024);
+ printf(" # %5dx %5ldMB process shared mem operations\n",
+ g->p.nr_loops, g->p.bytes_process/1024/1024);
+ printf(" # %5dx %5ldMB thread local mem operations\n",
+ g->p.nr_loops, g->p.bytes_thread/1024/1024);
+
+ printf(" ###\n");
+
+ printf("\n ###\n"); fflush(stdout);
+}
+
+static void init_thread_data(void)
+{
+ ssize_t size = sizeof(*g->threads)*g->p.nr_tasks;
+ int t;
+
+ g->threads = zalloc_shared_data(size);
+
+ for (t = 0; t < g->p.nr_tasks; t++) {
+ struct thread_data *td = g->threads + t;
+ int cpu;
+
+ /* Allow all nodes by default: */
+ td->bind_node = -1;
+
+ /* Allow all CPUs by default: */
+ CPU_ZERO(&td->bind_cpumask);
+ for (cpu = 0; cpu < g->p.nr_cpus; cpu++)
+ CPU_SET(cpu, &td->bind_cpumask);
+ }
+}
+
+static void deinit_thread_data(void)
+{
+ ssize_t size = sizeof(*g->threads)*g->p.nr_tasks;
+
+ free_data(g->threads, size);
+}
+
+static int init(void)
+{
+ g = (void *)alloc_data(sizeof(*g), MAP_SHARED, 1, 0, 0 /* THP */, 0);
+
+ /* Copy over options: */
+ g->p = p0;
+
+ g->p.nr_cpus = numa_num_configured_cpus();
+
+ g->p.nr_nodes = numa_max_node() + 1;
+
+ /* char array in count_process_nodes(): */
+ BUG_ON(g->p.nr_nodes > MAX_NR_NODES || g->p.nr_nodes < 0);
+
+ if (g->p.show_quiet && !g->p.show_details)
+ g->p.show_details = -1;
+
+ /* Some memory should be specified: */
+ if (!g->p.mb_global_str && !g->p.mb_proc_str && !g->p.mb_thread_str)
+ return -1;
+
+ if (g->p.mb_global_str) {
+ g->p.mb_global = atof(g->p.mb_global_str);
+ BUG_ON(g->p.mb_global < 0);
+ }
+
+ if (g->p.mb_proc_str) {
+ g->p.mb_proc = atof(g->p.mb_proc_str);
+ BUG_ON(g->p.mb_proc < 0);
+ }
+
+ if (g->p.mb_proc_locked_str) {
+ g->p.mb_proc_locked = atof(g->p.mb_proc_locked_str);
+ BUG_ON(g->p.mb_proc_locked < 0);
+ BUG_ON(g->p.mb_proc_locked > g->p.mb_proc);
+ }
+
+ if (g->p.mb_thread_str) {
+ g->p.mb_thread = atof(g->p.mb_thread_str);
+ BUG_ON(g->p.mb_thread < 0);
+ }
+
+ BUG_ON(g->p.nr_threads <= 0);
+ BUG_ON(g->p.nr_proc <= 0);
+
+ g->p.nr_tasks = g->p.nr_proc*g->p.nr_threads;
+
+ g->p.bytes_global = g->p.mb_global *1024L*1024L;
+ g->p.bytes_process = g->p.mb_proc *1024L*1024L;
+ g->p.bytes_process_locked = g->p.mb_proc_locked *1024L*1024L;
+ g->p.bytes_thread = g->p.mb_thread *1024L*1024L;
+
+ g->data = setup_shared_data(g->p.bytes_global);
+
+ /* Startup serialization: */
+ init_global_mutex(&g->start_work_mutex);
+ init_global_mutex(&g->startup_mutex);
+ init_global_mutex(&g->startup_done_mutex);
+ init_global_mutex(&g->stop_work_mutex);
+
+ init_thread_data();
+
+ tprintf("#\n");
+ parse_setup_cpu_list();
+ parse_setup_node_list();
+ tprintf("#\n");
+
+ print_summary();
+
+ return 0;
+}
+
+static void deinit(void)
+{
+ free_data(g->data, g->p.bytes_global);
+ g->data = NULL;
+
+ deinit_thread_data();
+
+ free_data(g, sizeof(*g));
+ g = NULL;
+}
+
+/*
+ * Print a short or long result, depending on the verbosity setting:
+ */
+static void print_res(const char *name, double val,
+ const char *txt_unit, const char *txt_short, const char *txt_long)
+{
+ if (!name)
+ name = "main,";
+
+ if (g->p.show_quiet)
+ printf(" %-30s %15.3f, %-15s %s\n", name, val, txt_unit, txt_short);
+ else
+ printf(" %14.3f %s\n", val, txt_long);
+}
+
+static int __bench_numa(const char *name)
+{
+ struct timeval start, stop, diff;
+ u64 runtime_ns_min, runtime_ns_sum;
+ pid_t *pids, pid, wpid;
+ double delta_runtime;
+ double runtime_avg;
+ double runtime_sec_max;
+ double runtime_sec_min;
+ int wait_stat;
+ double bytes;
+ int i, t;
+
+ if (init())
+ return -1;
+
+ pids = zalloc(g->p.nr_proc * sizeof(*pids));
+ pid = -1;
+
+ /* All threads try to acquire it, this way we can wait for them to start up: */
+ pthread_mutex_lock(&g->start_work_mutex);
+
+ if (g->p.serialize_startup) {
+ tprintf(" #\n");
+ tprintf(" # Startup synchronization: ..."); fflush(stdout);
+ }
+
+ gettimeofday(&start, NULL);
+
+ for (i = 0; i < g->p.nr_proc; i++) {
+ pid = fork();
+ dprintf(" # process %2d: PID %d\n", i, pid);
+
+ BUG_ON(pid < 0);
+ if (!pid) {
+ /* Child process: */
+ worker_process(i);
+
+ exit(0);
+ }
+ pids[i] = pid;
+
+ }
+ /* Wait for all the threads to start up: */
+ while (g->nr_tasks_started != g->p.nr_tasks)
+ usleep(1000);
+
+ BUG_ON(g->nr_tasks_started != g->p.nr_tasks);
+
+ if (g->p.serialize_startup) {
+ double startup_sec;
+
+ pthread_mutex_lock(&g->startup_done_mutex);
+
+ /* This will start all threads: */
+ pthread_mutex_unlock(&g->start_work_mutex);
+
+ /* This mutex is locked - the last started thread will wake us: */
+ pthread_mutex_lock(&g->startup_done_mutex);
+
+ gettimeofday(&stop, NULL);
+
+ timersub(&stop, &start, &diff);
+
+ startup_sec = diff.tv_sec * 1000000000.0;
+ startup_sec += diff.tv_usec * 1000.0;
+ startup_sec /= 1e9;
+
+ tprintf(" threads initialized in %.6f seconds.\n", startup_sec);
+ tprintf(" #\n");
+
+ start = stop;
+ pthread_mutex_unlock(&g->startup_done_mutex);
+ } else {
+ gettimeofday(&start, NULL);
+ }
+
+ /* Parent process: */
+
+
+ for (i = 0; i < g->p.nr_proc; i++) {
+ wpid = waitpid(pids[i], &wait_stat, 0);
+ BUG_ON(wpid < 0);
+ BUG_ON(!WIFEXITED(wait_stat));
+
+ }
+
+ runtime_ns_sum = 0;
+ runtime_ns_min = -1LL;
+
+ for (t = 0; t < g->p.nr_tasks; t++) {
+ u64 thread_runtime_ns = g->threads[t].runtime_ns;
+
+ runtime_ns_sum += thread_runtime_ns;
+ runtime_ns_min = min(thread_runtime_ns, runtime_ns_min);
+ }
+
+ gettimeofday(&stop, NULL);
+ timersub(&stop, &start, &diff);
+
+ BUG_ON(bench_format != BENCH_FORMAT_DEFAULT);
+
+ tprintf("\n ###\n");
+ tprintf("\n");
+
+ runtime_sec_max = diff.tv_sec * 1000000000.0;
+ runtime_sec_max += diff.tv_usec * 1000.0;
+ runtime_sec_max /= 1e9;
+
+ runtime_sec_min = runtime_ns_min/1e9;
+
+ bytes = g->bytes_done;
+ runtime_avg = (double)runtime_ns_sum / g->p.nr_tasks / 1e9;
+
+ if (g->p.measure_convergence) {
+ print_res(name, runtime_sec_max,
+ "secs,", "NUMA-convergence-latency", "secs latency to NUMA-converge");
+ }
+
+ print_res(name, runtime_sec_max,
+ "secs,", "runtime-max/thread", "secs slowest (max) thread-runtime");
+
+ print_res(name, runtime_sec_min,
+ "secs,", "runtime-min/thread", "secs fastest (min) thread-runtime");
+
+ print_res(name, runtime_avg,
+ "secs,", "runtime-avg/thread", "secs average thread-runtime");
+
+ delta_runtime = (runtime_sec_max - runtime_sec_min)/2.0;
+ print_res(name, delta_runtime / runtime_sec_max * 100.0,
+ "%,", "spread-runtime/thread", "% difference between max/avg runtime");
+
+ print_res(name, bytes / g->p.nr_tasks / 1e9,
+ "GB,", "data/thread", "GB data processed, per thread");
+
+ print_res(name, bytes / 1e9,
+ "GB,", "data-total", "GB data processed, total");
+
+ print_res(name, runtime_sec_max * 1e9 / (bytes / g->p.nr_tasks),
+ "nsecs,", "runtime/byte/thread","nsecs/byte/thread runtime");
+
+ print_res(name, bytes / g->p.nr_tasks / 1e9 / runtime_sec_max,
+ "GB/sec,", "thread-speed", "GB/sec/thread speed");
+
+ print_res(name, bytes / runtime_sec_max / 1e9,
+ "GB/sec,", "total-speed", "GB/sec total speed");
+
+ free(pids);
+
+ deinit();
+
+ return 0;
+}
+
+#define MAX_ARGS 50
+
+static int command_size(const char **argv)
+{
+ int size = 0;
+
+ while (*argv) {
+ size++;
+ argv++;
+ }
+
+ BUG_ON(size >= MAX_ARGS);
+
+ return size;
+}
+
+static void init_params(struct params *p, const char *name, int argc, const char **argv)
+{
+ int i;
+
+ printf("\n # Running %s \"perf bench numa", name);
+
+ for (i = 0; i < argc; i++)
+ printf(" %s", argv[i]);
+
+ printf("\"\n");
+
+ memset(p, 0, sizeof(*p));
+
+ /* Initialize nonzero defaults: */
+
+ p->serialize_startup = 1;
+ p->data_reads = true;
+ p->data_writes = true;
+ p->data_backwards = true;
+ p->data_rand_walk = true;
+ p->nr_loops = -1;
+ p->init_random = true;
+}
+
+static int run_bench_numa(const char *name, const char **argv)
+{
+ int argc = command_size(argv);
+
+ init_params(&p0, name, argc, argv);
+ argc = parse_options(argc, argv, options, bench_numa_usage, 0);
+ if (argc)
+ goto err;
+
+ if (__bench_numa(name))
+ goto err;
+
+ return 0;
+
+err:
+ usage_with_options(numa_usage, options);
+ return -1;
+}
+
+#define OPT_BW_RAM "-s", "20", "-zZq", "--thp", " 1", "--no-data_rand_walk"
+#define OPT_BW_RAM_NOTHP OPT_BW_RAM, "--thp", "-1"
+
+#define OPT_CONV "-s", "100", "-zZ0qcm", "--thp", " 1"
+#define OPT_CONV_NOTHP OPT_CONV, "--thp", "-1"
+
+#define OPT_BW "-s", "20", "-zZ0q", "--thp", " 1"
+#define OPT_BW_NOTHP OPT_BW, "--thp", "-1"
+
+/*
+ * The built-in test-suite executed by "perf bench numa -a".
+ *
+ * (A minimum of 4 nodes and 16 GB of RAM is recommended.)
+ */
+static const char *tests[][MAX_ARGS] = {
+ /* Basic single-stream NUMA bandwidth measurements: */
+ { "RAM-bw-local,", "mem", "-p", "1", "-t", "1", "-P", "1024",
+ "-C" , "0", "-M", "0", OPT_BW_RAM },
+ { "RAM-bw-local-NOTHP,",
+ "mem", "-p", "1", "-t", "1", "-P", "1024",
+ "-C" , "0", "-M", "0", OPT_BW_RAM_NOTHP },
+ { "RAM-bw-remote,", "mem", "-p", "1", "-t", "1", "-P", "1024",
+ "-C" , "0", "-M", "1", OPT_BW_RAM },
+
+ /* 2-stream NUMA bandwidth measurements: */
+ { "RAM-bw-local-2x,", "mem", "-p", "2", "-t", "1", "-P", "1024",
+ "-C", "0,2", "-M", "0x2", OPT_BW_RAM },
+ { "RAM-bw-remote-2x,", "mem", "-p", "2", "-t", "1", "-P", "1024",
+ "-C", "0,2", "-M", "1x2", OPT_BW_RAM },
+
+ /* Cross-stream NUMA bandwidth measurement: */
+ { "RAM-bw-cross,", "mem", "-p", "2", "-t", "1", "-P", "1024",
+ "-C", "0,8", "-M", "1,0", OPT_BW_RAM },
+
+ /* Convergence latency measurements: */
+ { " 1x3-convergence,", "mem", "-p", "1", "-t", "3", "-P", "512", OPT_CONV },
+ { " 1x4-convergence,", "mem", "-p", "1", "-t", "4", "-P", "512", OPT_CONV },
+ { " 1x6-convergence,", "mem", "-p", "1", "-t", "6", "-P", "1020", OPT_CONV },
+ { " 2x3-convergence,", "mem", "-p", "3", "-t", "3", "-P", "1020", OPT_CONV },
+ { " 3x3-convergence,", "mem", "-p", "3", "-t", "3", "-P", "1020", OPT_CONV },
+ { " 4x4-convergence,", "mem", "-p", "4", "-t", "4", "-P", "512", OPT_CONV },
+ { " 4x4-convergence-NOTHP,",
+ "mem", "-p", "4", "-t", "4", "-P", "512", OPT_CONV_NOTHP },
+ { " 4x6-convergence,", "mem", "-p", "4", "-t", "6", "-P", "1020", OPT_CONV },
+ { " 4x8-convergence,", "mem", "-p", "4", "-t", "8", "-P", "512", OPT_CONV },
+ { " 8x4-convergence,", "mem", "-p", "8", "-t", "4", "-P", "512", OPT_CONV },
+ { " 8x4-convergence-NOTHP,",
+ "mem", "-p", "8", "-t", "4", "-P", "512", OPT_CONV_NOTHP },
+ { " 3x1-convergence,", "mem", "-p", "3", "-t", "1", "-P", "512", OPT_CONV },
+ { " 4x1-convergence,", "mem", "-p", "4", "-t", "1", "-P", "512", OPT_CONV },
+ { " 8x1-convergence,", "mem", "-p", "8", "-t", "1", "-P", "512", OPT_CONV },
+ { "16x1-convergence,", "mem", "-p", "16", "-t", "1", "-P", "256", OPT_CONV },
+ { "32x1-convergence,", "mem", "-p", "32", "-t", "1", "-P", "128", OPT_CONV },
+
+ /* Various NUMA process/thread layout bandwidth measurements: */
+ { " 2x1-bw-process,", "mem", "-p", "2", "-t", "1", "-P", "1024", OPT_BW },
+ { " 3x1-bw-process,", "mem", "-p", "3", "-t", "1", "-P", "1024", OPT_BW },
+ { " 4x1-bw-process,", "mem", "-p", "4", "-t", "1", "-P", "1024", OPT_BW },
+ { " 8x1-bw-process,", "mem", "-p", "8", "-t", "1", "-P", " 512", OPT_BW },
+ { " 8x1-bw-process-NOTHP,",
+ "mem", "-p", "8", "-t", "1", "-P", " 512", OPT_BW_NOTHP },
+ { "16x1-bw-process,", "mem", "-p", "16", "-t", "1", "-P", "256", OPT_BW },
+
+ { " 4x1-bw-thread,", "mem", "-p", "1", "-t", "4", "-T", "256", OPT_BW },
+ { " 8x1-bw-thread,", "mem", "-p", "1", "-t", "8", "-T", "256", OPT_BW },
+ { "16x1-bw-thread,", "mem", "-p", "1", "-t", "16", "-T", "128", OPT_BW },
+ { "32x1-bw-thread,", "mem", "-p", "1", "-t", "32", "-T", "64", OPT_BW },
+
+ { " 2x3-bw-thread,", "mem", "-p", "2", "-t", "3", "-P", "512", OPT_BW },
+ { " 4x4-bw-thread,", "mem", "-p", "4", "-t", "4", "-P", "512", OPT_BW },
+ { " 4x6-bw-thread,", "mem", "-p", "4", "-t", "6", "-P", "512", OPT_BW },
+ { " 4x8-bw-thread,", "mem", "-p", "4", "-t", "8", "-P", "512", OPT_BW },
+ { " 4x8-bw-thread-NOTHP,",
+ "mem", "-p", "4", "-t", "8", "-P", "512", OPT_BW_NOTHP },
+ { " 3x3-bw-thread,", "mem", "-p", "3", "-t", "3", "-P", "512", OPT_BW },
+ { " 5x5-bw-thread,", "mem", "-p", "5", "-t", "5", "-P", "512", OPT_BW },
+
+ { "2x16-bw-thread,", "mem", "-p", "2", "-t", "16", "-P", "512", OPT_BW },
+ { "1x32-bw-thread,", "mem", "-p", "1", "-t", "32", "-P", "2048", OPT_BW },
+
+ { "numa02-bw,", "mem", "-p", "1", "-t", "32", "-T", "32", OPT_BW },
+ { "numa02-bw-NOTHP,", "mem", "-p", "1", "-t", "32", "-T", "32", OPT_BW_NOTHP },
+ { "numa01-bw-thread,", "mem", "-p", "2", "-t", "16", "-T", "192", OPT_BW },
+ { "numa01-bw-thread-NOTHP,",
+ "mem", "-p", "2", "-t", "16", "-T", "192", OPT_BW_NOTHP },
+};
+
+static int bench_all(void)
+{
+ int nr = ARRAY_SIZE(tests);
+ int ret;
+ int i;
+
+ ret = system("echo ' #'; echo ' # Running test on: '$(uname -a); echo ' #'");
+ BUG_ON(ret < 0);
+
+ for (i = 0; i < nr; i++) {
+ if (run_bench_numa(tests[i][0], tests[i] + 1))
+ return -1;
+ }
+
+ printf("\n");
+
+ return 0;
+}
+
+int bench_numa(int argc, const char **argv, const char *prefix __maybe_unused)
+{
+ init_params(&p0, "main,", argc, argv);
+ argc = parse_options(argc, argv, options, bench_numa_usage, 0);
+ if (argc)
+ goto err;
+
+ if (p0.run_all)
+ return bench_all();
+
+ if (__bench_numa(NULL))
+ goto err;
+
+ return 0;
+
+err:
+ usage_with_options(numa_usage, options);
+ return -1;
+}
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index dc870cf..2e6961e 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -34,9 +34,10 @@
struct perf_annotate {
struct perf_tool tool;
- bool force, use_tui, use_stdio;
+ bool force, use_tui, use_stdio, use_gtk;
bool full_paths;
bool print_line;
+ bool skip_missing;
const char *sym_hist_filter;
const char *cpu_list;
DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
@@ -138,9 +139,22 @@
continue;
}
- if (use_browser > 0) {
+ if (use_browser == 2) {
+ int ret;
+
+ ret = hist_entry__gtk_annotate(he, evidx, NULL);
+ if (!ret || !ann->skip_missing)
+ return;
+
+ /* skip missing symbols */
+ nd = rb_next(nd);
+ } else if (use_browser == 1) {
key = hist_entry__tui_annotate(he, evidx, NULL);
switch (key) {
+ case -1:
+ if (!ann->skip_missing)
+ return;
+ /* fall through */
case K_RIGHT:
next = rb_next(nd);
break;
@@ -224,6 +238,10 @@
ui__error("The %s file has no samples!\n", session->filename);
goto out_delete;
}
+
+ if (use_browser == 2)
+ perf_gtk__show_annotations();
+
out_delete:
/*
* Speed up the exit process, for large files this can
@@ -270,6 +288,7 @@
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
+ OPT_BOOLEAN(0, "gtk", &annotate.use_gtk, "Use the GTK interface"),
OPT_BOOLEAN(0, "tui", &annotate.use_tui, "Use the TUI interface"),
OPT_BOOLEAN(0, "stdio", &annotate.use_stdio, "Use the stdio interface"),
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
@@ -280,6 +299,8 @@
"print matching source lines (may be slow)"),
OPT_BOOLEAN('P', "full-paths", &annotate.full_paths,
"Don't shorten the displayed pathnames"),
+ OPT_BOOLEAN(0, "skip-missing", &annotate.skip_missing,
+ "Skip symbols that cannot be annotated"),
OPT_STRING('C', "cpu", &annotate.cpu_list, "cpu", "list of cpus to profile"),
OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
"Look for files with symbols relative to this directory"),
@@ -300,6 +321,8 @@
use_browser = 0;
else if (annotate.use_tui)
use_browser = 1;
+ else if (annotate.use_gtk)
+ use_browser = 2;
setup_browser(true);
@@ -309,7 +332,8 @@
if (symbol__init() < 0)
return -1;
- setup_sorting(annotate_usage, options);
+ if (setup_sorting() < 0)
+ usage_with_options(annotate_usage, options);
if (argc) {
/*
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
index cae9a5f..77298bf 100644
--- a/tools/perf/builtin-bench.c
+++ b/tools/perf/builtin-bench.c
@@ -35,6 +35,18 @@
/* sentinel: easy for help */
#define suite_all { "all", "Test all benchmark suites", NULL }
+#ifdef LIBNUMA_SUPPORT
+static struct bench_suite numa_suites[] = {
+ { "mem",
+ "Benchmark for NUMA workloads",
+ bench_numa },
+ suite_all,
+ { NULL,
+ NULL,
+ NULL }
+};
+#endif
+
static struct bench_suite sched_suites[] = {
{ "messaging",
"Benchmark for scheduler and IPC mechanisms",
@@ -68,6 +80,11 @@
};
static struct bench_subsys subsystems[] = {
+#ifdef LIBNUMA_SUPPORT
+ { "numa",
+ "NUMA scheduling and MM behavior",
+ numa_suites },
+#endif
{ "sched",
"scheduler and IPC mechanism",
sched_suites },
@@ -159,6 +176,7 @@
printf("# Running %s/%s benchmark...\n",
subsys->name,
suites[i].name);
+ fflush(stdout);
argv[1] = suites[i].name;
suites[i].fn(1, argv, NULL);
@@ -225,6 +243,7 @@
printf("# Running %s/%s benchmark...\n",
subsystems[i].name,
subsystems[i].suites[j].name);
+ fflush(stdout);
status = subsystems[i].suites[j].fn(argc - 1,
argv + 1, prefix);
goto end;
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index fae8b25..c96c8fa 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -14,6 +14,7 @@
#include "util/parse-options.h"
#include "util/strlist.h"
#include "util/build-id.h"
+#include "util/session.h"
#include "util/symbol.h"
static int build_id_cache__add_file(const char *filename, const char *debugdir)
@@ -58,19 +59,89 @@
return err;
}
+static bool dso__missing_buildid_cache(struct dso *dso, int parm __maybe_unused)
+{
+ char filename[PATH_MAX];
+ u8 build_id[BUILD_ID_SIZE];
+
+ if (dso__build_id_filename(dso, filename, sizeof(filename)) &&
+ filename__read_build_id(filename, build_id,
+ sizeof(build_id)) != sizeof(build_id)) {
+ if (errno == ENOENT)
+ return false;
+
+ pr_warning("Problems with %s file, consider removing it from the cache\n",
+ filename);
+ } else if (memcmp(dso->build_id, build_id, sizeof(dso->build_id))) {
+ pr_warning("Problems with %s file, consider removing it from the cache\n",
+ filename);
+ }
+
+ return true;
+}
+
+static int build_id_cache__fprintf_missing(const char *filename, bool force, FILE *fp)
+{
+ struct perf_session *session = perf_session__new(filename, O_RDONLY,
+ force, false, NULL);
+ if (session == NULL)
+ return -1;
+
+ perf_session__fprintf_dsos_buildid(session, fp, dso__missing_buildid_cache, 0);
+ perf_session__delete(session);
+
+ return 0;
+}
+
+static int build_id_cache__update_file(const char *filename,
+ const char *debugdir)
+{
+ u8 build_id[BUILD_ID_SIZE];
+ char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+
+ int err;
+
+ if (filename__read_build_id(filename, &build_id, sizeof(build_id)) < 0) {
+ pr_debug("Couldn't read a build-id in %s\n", filename);
+ return -1;
+ }
+
+ build_id__sprintf(build_id, sizeof(build_id), sbuild_id);
+ err = build_id_cache__remove_s(sbuild_id, debugdir);
+ if (!err) {
+ err = build_id_cache__add_s(sbuild_id, debugdir, filename,
+ false, false);
+ }
+ if (verbose)
+ pr_info("Updating %s %s: %s\n", sbuild_id, filename,
+ err ? "FAIL" : "Ok");
+
+ return err;
+}
+
int cmd_buildid_cache(int argc, const char **argv,
const char *prefix __maybe_unused)
{
struct strlist *list;
struct str_node *pos;
+ int ret = 0;
+ bool force = false;
char debugdir[PATH_MAX];
char const *add_name_list_str = NULL,
- *remove_name_list_str = NULL;
+ *remove_name_list_str = NULL,
+ *missing_filename = NULL,
+ *update_name_list_str = NULL;
+
const struct option buildid_cache_options[] = {
OPT_STRING('a', "add", &add_name_list_str,
"file list", "file(s) to add"),
OPT_STRING('r', "remove", &remove_name_list_str, "file list",
"file(s) to remove"),
+ OPT_STRING('M', "missing", &missing_filename, "file",
+ "to find missing build ids in the cache"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
+ OPT_STRING('u', "update", &update_name_list_str, "file list",
+ "file(s) to update"),
OPT_INCR('v', "verbose", &verbose, "be more verbose"),
OPT_END()
};
@@ -125,5 +196,26 @@
}
}
- return 0;
+ if (missing_filename)
+ ret = build_id_cache__fprintf_missing(missing_filename, force, stdout);
+
+ if (update_name_list_str) {
+ list = strlist__new(true, update_name_list_str);
+ if (list) {
+ strlist__for_each(pos, list)
+ if (build_id_cache__update_file(pos->s, debugdir)) {
+ if (errno == ENOENT) {
+ pr_debug("%s wasn't in the cache\n",
+ pos->s);
+ continue;
+ }
+ pr_warning("Couldn't update %s: %s\n",
+ pos->s, strerror(errno));
+ }
+
+ strlist__delete(list);
+ }
+ }
+
+ return ret;
}
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index a82d99f..e74366a 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -44,23 +44,26 @@
return fprintf(fp, "%s\n", sbuild_id);
}
+static bool dso__skip_buildid(struct dso *dso, int with_hits)
+{
+ return with_hits && !dso->hit;
+}
+
static int perf_session__list_build_ids(bool force, bool with_hits)
{
struct perf_session *session;
symbol__elf_init();
+ /*
+ * See if this is an ELF file first:
+ */
+ if (filename__fprintf_build_id(input_name, stdout))
+ goto out;
session = perf_session__new(input_name, O_RDONLY, force, false,
&build_id__mark_dso_hit_ops);
if (session == NULL)
return -1;
-
- /*
- * See if this is an ELF file first:
- */
- if (filename__fprintf_build_id(session->filename, stdout))
- goto out;
-
/*
* in pipe-mode, the only way to get the buildids is to parse
* the record stream. Buildids are stored as RECORD_HEADER_BUILD_ID
@@ -68,9 +71,9 @@
if (with_hits || session->fd_pipe)
perf_session__process_events(session, &build_id__mark_dso_hit_ops);
- perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
-out:
+ perf_session__fprintf_dsos_buildid(session, stdout, dso__skip_buildid, with_hits);
perf_session__delete(session);
+out:
return 0;
}
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index 93b852f..d207a97 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -23,7 +23,6 @@
*input_new = "perf.data";
static char diff__default_sort_order[] = "dso,symbol";
static bool force;
-static bool show_displacement;
static bool show_period;
static bool show_formula;
static bool show_baseline_only;
@@ -146,58 +145,47 @@
return -EINVAL;
}
-static double get_period_percent(struct hist_entry *he, u64 period)
+double perf_diff__period_percent(struct hist_entry *he, u64 period)
{
u64 total = he->hists->stats.total_period;
return (period * 100.0) / total;
}
-double perf_diff__compute_delta(struct hist_entry *he)
+double perf_diff__compute_delta(struct hist_entry *he, struct hist_entry *pair)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
- double new_percent = get_period_percent(he, he->stat.period);
- double old_percent = pair ? get_period_percent(pair, pair->stat.period) : 0.0;
+ double new_percent = perf_diff__period_percent(he, he->stat.period);
+ double old_percent = perf_diff__period_percent(pair, pair->stat.period);
he->diff.period_ratio_delta = new_percent - old_percent;
he->diff.computed = true;
return he->diff.period_ratio_delta;
}
-double perf_diff__compute_ratio(struct hist_entry *he)
+double perf_diff__compute_ratio(struct hist_entry *he, struct hist_entry *pair)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
double new_period = he->stat.period;
- double old_period = pair ? pair->stat.period : 0;
+ double old_period = pair->stat.period;
he->diff.computed = true;
- he->diff.period_ratio = pair ? (new_period / old_period) : 0;
+ he->diff.period_ratio = new_period / old_period;
return he->diff.period_ratio;
}
-s64 perf_diff__compute_wdiff(struct hist_entry *he)
+s64 perf_diff__compute_wdiff(struct hist_entry *he, struct hist_entry *pair)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
u64 new_period = he->stat.period;
- u64 old_period = pair ? pair->stat.period : 0;
+ u64 old_period = pair->stat.period;
he->diff.computed = true;
-
- if (!pair)
- he->diff.wdiff = 0;
- else
- he->diff.wdiff = new_period * compute_wdiff_w2 -
- old_period * compute_wdiff_w1;
+ he->diff.wdiff = new_period * compute_wdiff_w2 -
+ old_period * compute_wdiff_w1;
return he->diff.wdiff;
}
-static int formula_delta(struct hist_entry *he, char *buf, size_t size)
+static int formula_delta(struct hist_entry *he, struct hist_entry *pair,
+ char *buf, size_t size)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
-
- if (!pair)
- return -1;
-
return scnprintf(buf, size,
"(%" PRIu64 " * 100 / %" PRIu64 ") - "
"(%" PRIu64 " * 100 / %" PRIu64 ")",
@@ -205,41 +193,36 @@
pair->stat.period, pair->hists->stats.total_period);
}
-static int formula_ratio(struct hist_entry *he, char *buf, size_t size)
+static int formula_ratio(struct hist_entry *he, struct hist_entry *pair,
+ char *buf, size_t size)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
double new_period = he->stat.period;
- double old_period = pair ? pair->stat.period : 0;
-
- if (!pair)
- return -1;
+ double old_period = pair->stat.period;
return scnprintf(buf, size, "%.0F / %.0F", new_period, old_period);
}
-static int formula_wdiff(struct hist_entry *he, char *buf, size_t size)
+static int formula_wdiff(struct hist_entry *he, struct hist_entry *pair,
+ char *buf, size_t size)
{
- struct hist_entry *pair = hist_entry__next_pair(he);
u64 new_period = he->stat.period;
- u64 old_period = pair ? pair->stat.period : 0;
-
- if (!pair)
- return -1;
+ u64 old_period = pair->stat.period;
return scnprintf(buf, size,
"(%" PRIu64 " * " "%" PRId64 ") - (%" PRIu64 " * " "%" PRId64 ")",
new_period, compute_wdiff_w2, old_period, compute_wdiff_w1);
}
-int perf_diff__formula(char *buf, size_t size, struct hist_entry *he)
+int perf_diff__formula(struct hist_entry *he, struct hist_entry *pair,
+ char *buf, size_t size)
{
switch (compute) {
case COMPUTE_DELTA:
- return formula_delta(he, buf, size);
+ return formula_delta(he, pair, buf, size);
case COMPUTE_RATIO:
- return formula_ratio(he, buf, size);
+ return formula_ratio(he, pair, buf, size);
case COMPUTE_WEIGHTED_DIFF:
- return formula_wdiff(he, buf, size);
+ return formula_wdiff(he, pair, buf, size);
default:
BUG_ON(1);
}
@@ -292,48 +275,6 @@
.ordering_requires_timestamps = true,
};
-static void insert_hist_entry_by_name(struct rb_root *root,
- struct hist_entry *he)
-{
- struct rb_node **p = &root->rb_node;
- struct rb_node *parent = NULL;
- struct hist_entry *iter;
-
- while (*p != NULL) {
- parent = *p;
- iter = rb_entry(parent, struct hist_entry, rb_node);
- if (hist_entry__cmp(he, iter) < 0)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
- }
-
- rb_link_node(&he->rb_node, parent, p);
- rb_insert_color(&he->rb_node, root);
-}
-
-static void hists__name_resort(struct hists *self, bool sort)
-{
- unsigned long position = 1;
- struct rb_root tmp = RB_ROOT;
- struct rb_node *next = rb_first(&self->entries);
-
- while (next != NULL) {
- struct hist_entry *n = rb_entry(next, struct hist_entry, rb_node);
-
- next = rb_next(&n->rb_node);
- n->position = position++;
-
- if (sort) {
- rb_erase(&n->rb_node, &self->entries);
- insert_hist_entry_by_name(&tmp, n);
- }
- }
-
- if (sort)
- self->entries = tmp;
-}
-
static struct perf_evsel *evsel_match(struct perf_evsel *evsel,
struct perf_evlist *evlist)
{
@@ -346,34 +287,34 @@
return NULL;
}
-static void perf_evlist__resort_hists(struct perf_evlist *evlist, bool name)
+static void perf_evlist__collapse_resort(struct perf_evlist *evlist)
{
struct perf_evsel *evsel;
list_for_each_entry(evsel, &evlist->entries, node) {
struct hists *hists = &evsel->hists;
- hists__output_resort(hists);
-
- /*
- * The hists__name_resort only sets possition
- * if name is false.
- */
- if (name || ((!name) && show_displacement))
- hists__name_resort(hists, name);
+ hists__collapse_resort(hists);
}
}
static void hists__baseline_only(struct hists *hists)
{
- struct rb_node *next = rb_first(&hists->entries);
+ struct rb_root *root;
+ struct rb_node *next;
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ next = rb_first(root);
while (next != NULL) {
- struct hist_entry *he = rb_entry(next, struct hist_entry, rb_node);
+ struct hist_entry *he = rb_entry(next, struct hist_entry, rb_node_in);
- next = rb_next(&he->rb_node);
+ next = rb_next(&he->rb_node_in);
if (!hist_entry__next_pair(he)) {
- rb_erase(&he->rb_node, &hists->entries);
+ rb_erase(&he->rb_node_in, root);
hist_entry__free(he);
}
}
@@ -385,18 +326,21 @@
while (next != NULL) {
struct hist_entry *he = rb_entry(next, struct hist_entry, rb_node);
+ struct hist_entry *pair = hist_entry__next_pair(he);
next = rb_next(&he->rb_node);
+ if (!pair)
+ continue;
switch (compute) {
case COMPUTE_DELTA:
- perf_diff__compute_delta(he);
+ perf_diff__compute_delta(he, pair);
break;
case COMPUTE_RATIO:
- perf_diff__compute_ratio(he);
+ perf_diff__compute_ratio(he, pair);
break;
case COMPUTE_WEIGHTED_DIFF:
- perf_diff__compute_wdiff(he);
+ perf_diff__compute_wdiff(he, pair);
break;
default:
BUG_ON(1);
@@ -470,19 +414,30 @@
static void hists__compute_resort(struct hists *hists)
{
- struct rb_root tmp = RB_ROOT;
- struct rb_node *next = rb_first(&hists->entries);
+ struct rb_root *root;
+ struct rb_node *next;
+
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ hists->entries = RB_ROOT;
+ next = rb_first(root);
+
+ hists->nr_entries = 0;
+ hists->stats.total_period = 0;
+ hists__reset_col_len(hists);
while (next != NULL) {
- struct hist_entry *he = rb_entry(next, struct hist_entry, rb_node);
+ struct hist_entry *he;
- next = rb_next(&he->rb_node);
+ he = rb_entry(next, struct hist_entry, rb_node_in);
+ next = rb_next(&he->rb_node_in);
- rb_erase(&he->rb_node, &hists->entries);
- insert_hist_entry_by_compute(&tmp, he, compute);
+ insert_hist_entry_by_compute(&hists->entries, he, compute);
+ hists__inc_nr_entries(hists, he);
}
-
- hists->entries = tmp;
}
static void hists__process(struct hists *old, struct hists *new)
@@ -497,6 +452,8 @@
if (sort_compute) {
hists__precompute(new);
hists__compute_resort(new);
+ } else {
+ hists__output_resort(new);
}
hists__fprintf(new, true, 0, 0, stdout);
@@ -528,8 +485,8 @@
evlist_old = older->evlist;
evlist_new = newer->evlist;
- perf_evlist__resort_hists(evlist_old, true);
- perf_evlist__resort_hists(evlist_new, false);
+ perf_evlist__collapse_resort(evlist_old);
+ perf_evlist__collapse_resort(evlist_new);
list_for_each_entry(evsel, &evlist_new->entries, node) {
struct perf_evsel *evsel_old;
@@ -562,8 +519,6 @@
static const struct option options[] = {
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
- OPT_BOOLEAN('M', "displacement", &show_displacement,
- "Show position displacement relative to baseline"),
OPT_BOOLEAN('b', "baseline-only", &show_baseline_only,
"Show only items with match in baseline"),
OPT_CALLBACK('c', "compute", &compute,
@@ -597,40 +552,32 @@
static void ui_init(void)
{
- perf_hpp__init();
-
- /* No overhead column. */
- perf_hpp__column_enable(PERF_HPP__OVERHEAD, false);
-
/*
- * Display baseline/delta/ratio/displacement/
+ * Display baseline/delta/ratio
* formula/periods columns.
*/
- perf_hpp__column_enable(PERF_HPP__BASELINE, true);
+ perf_hpp__column_enable(PERF_HPP__BASELINE);
switch (compute) {
case COMPUTE_DELTA:
- perf_hpp__column_enable(PERF_HPP__DELTA, true);
+ perf_hpp__column_enable(PERF_HPP__DELTA);
break;
case COMPUTE_RATIO:
- perf_hpp__column_enable(PERF_HPP__RATIO, true);
+ perf_hpp__column_enable(PERF_HPP__RATIO);
break;
case COMPUTE_WEIGHTED_DIFF:
- perf_hpp__column_enable(PERF_HPP__WEIGHTED_DIFF, true);
+ perf_hpp__column_enable(PERF_HPP__WEIGHTED_DIFF);
break;
default:
BUG_ON(1);
};
- if (show_displacement)
- perf_hpp__column_enable(PERF_HPP__DISPL, true);
-
if (show_formula)
- perf_hpp__column_enable(PERF_HPP__FORMULA, true);
+ perf_hpp__column_enable(PERF_HPP__FORMULA);
if (show_period) {
- perf_hpp__column_enable(PERF_HPP__PERIOD, true);
- perf_hpp__column_enable(PERF_HPP__PERIOD_BASELINE, true);
+ perf_hpp__column_enable(PERF_HPP__PERIOD);
+ perf_hpp__column_enable(PERF_HPP__PERIOD_BASELINE);
}
}
@@ -658,7 +605,9 @@
ui_init();
- setup_sorting(diff_usage, options);
+ if (setup_sorting() < 0)
+ usage_with_options(diff_usage, options);
+
setup_pager();
sort_entry__setup_elide(&sort_dso, symbol_conf.dso_list, "dso", NULL);
diff --git a/tools/perf/builtin-evlist.c b/tools/perf/builtin-evlist.c
index c20f1dc..05bd9df 100644
--- a/tools/perf/builtin-evlist.c
+++ b/tools/perf/builtin-evlist.c
@@ -15,39 +15,6 @@
#include "util/parse-options.h"
#include "util/session.h"
-struct perf_attr_details {
- bool freq;
- bool verbose;
-};
-
-static int comma_printf(bool *first, const char *fmt, ...)
-{
- va_list args;
- int ret = 0;
-
- if (!*first) {
- ret += printf(",");
- } else {
- ret += printf(":");
- *first = false;
- }
-
- va_start(args, fmt);
- ret += vprintf(fmt, args);
- va_end(args);
- return ret;
-}
-
-static int __if_print(bool *first, const char *field, u64 value)
-{
- if (value == 0)
- return 0;
-
- return comma_printf(first, " %s: %" PRIu64, field, value);
-}
-
-#define if_print(field) __if_print(&first, #field, pos->attr.field)
-
static int __cmd_evlist(const char *file_name, struct perf_attr_details *details)
{
struct perf_session *session;
@@ -57,52 +24,8 @@
if (session == NULL)
return -ENOMEM;
- list_for_each_entry(pos, &session->evlist->entries, node) {
- bool first = true;
-
- printf("%s", perf_evsel__name(pos));
-
- if (details->verbose || details->freq) {
- comma_printf(&first, " sample_freq=%" PRIu64,
- (u64)pos->attr.sample_freq);
- }
-
- if (details->verbose) {
- if_print(type);
- if_print(config);
- if_print(config1);
- if_print(config2);
- if_print(size);
- if_print(sample_type);
- if_print(read_format);
- if_print(disabled);
- if_print(inherit);
- if_print(pinned);
- if_print(exclusive);
- if_print(exclude_user);
- if_print(exclude_kernel);
- if_print(exclude_hv);
- if_print(exclude_idle);
- if_print(mmap);
- if_print(comm);
- if_print(freq);
- if_print(inherit_stat);
- if_print(enable_on_exec);
- if_print(task);
- if_print(watermark);
- if_print(precise_ip);
- if_print(mmap_data);
- if_print(sample_id_all);
- if_print(exclude_host);
- if_print(exclude_guest);
- if_print(__reserved_1);
- if_print(wakeup_events);
- if_print(bp_type);
- if_print(branch_sample_type);
- }
-
- putchar('\n');
- }
+ list_for_each_entry(pos, &session->evlist->entries, node)
+ perf_evsel__fprintf(pos, details, stdout);
perf_session__delete(session);
return 0;
@@ -116,6 +39,8 @@
OPT_BOOLEAN('F', "freq", &details.freq, "Show the sample frequency"),
OPT_BOOLEAN('v', "verbose", &details.verbose,
"Show all event attr details"),
+ OPT_BOOLEAN('g', "group", &details.event_group,
+ "Show event group information"),
OPT_END()
};
const char * const evlist_usage[] = {
@@ -127,5 +52,10 @@
if (argc)
usage_with_options(evlist_usage, options);
+ if (details.event_group && (details.verbose || details.freq)) {
+ pr_err("--group option is not compatible with other options\n");
+ usage_with_options(evlist_usage, options);
+ }
+
return __cmd_evlist(input_name, &details);
}
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 0b4b796..46878da 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -17,6 +17,7 @@
#include "util/debug.h"
#include <linux/rbtree.h>
+#include <linux/string.h>
struct alloc_stat;
typedef int (*sort_fn_t)(struct alloc_stat *, struct alloc_stat *);
@@ -340,7 +341,7 @@
int n_lines, int is_caller)
{
struct rb_node *next;
- struct machine *machine;
+ struct machine *machine = &session->machines.host;
printf("%.102s\n", graph_dotted_line);
printf(" %-34s |", is_caller ? "Callsite": "Alloc Ptr");
@@ -349,11 +350,6 @@
next = rb_first(root);
- machine = perf_session__find_host_machine(session);
- if (!machine) {
- pr_err("__print_result: couldn't find kernel information\n");
- return;
- }
while (next && n_lines--) {
struct alloc_stat *data = rb_entry(next, struct alloc_stat,
node);
@@ -614,8 +610,7 @@
&pingpong_sort_dimension,
};
-#define NUM_AVAIL_SORTS \
- (int)(sizeof(avail_sorts) / sizeof(struct sort_dimension *))
+#define NUM_AVAIL_SORTS ((int)ARRAY_SIZE(avail_sorts))
static int sort_dimension__add(const char *tok, struct list_head *list)
{
@@ -624,12 +619,11 @@
for (i = 0; i < NUM_AVAIL_SORTS; i++) {
if (!strcmp(avail_sorts[i]->name, tok)) {
- sort = malloc(sizeof(*sort));
+ sort = memdup(avail_sorts[i], sizeof(*avail_sorts[i]));
if (!sort) {
- pr_err("%s: malloc failed\n", __func__);
+ pr_err("%s: memdup failed\n", __func__);
return -1;
}
- memcpy(sort, avail_sorts[i], sizeof(*sort));
list_add_tail(&sort->list, list);
return 0;
}
diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c
index ca3f80e..37a769d 100644
--- a/tools/perf/builtin-kvm.c
+++ b/tools/perf/builtin-kvm.c
@@ -973,8 +973,7 @@
int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused)
{
- const char *file_name;
-
+ const char *file_name = NULL;
const struct option kvm_options[] = {
OPT_STRING('i', "input", &file_name, "file",
"Input file name"),
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f3151d3..774c907 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -224,130 +224,28 @@
static int perf_record__open(struct perf_record *rec)
{
+ char msg[512];
struct perf_evsel *pos;
struct perf_evlist *evlist = rec->evlist;
struct perf_session *session = rec->session;
struct perf_record_opts *opts = &rec->opts;
int rc = 0;
- /*
- * Set the evsel leader links before we configure attributes,
- * since some might depend on this info.
- */
- if (opts->group)
- perf_evlist__set_leader(evlist);
-
- perf_evlist__config_attrs(evlist, opts);
+ perf_evlist__config(evlist, opts);
list_for_each_entry(pos, &evlist->entries, node) {
- struct perf_event_attr *attr = &pos->attr;
- /*
- * Check if parse_single_tracepoint_event has already asked for
- * PERF_SAMPLE_TIME.
- *
- * XXX this is kludgy but short term fix for problems introduced by
- * eac23d1c that broke 'perf script' by having different sample_types
- * when using multiple tracepoint events when we use a perf binary
- * that tries to use sample_id_all on an older kernel.
- *
- * We need to move counter creation to perf_session, support
- * different sample_types, etc.
- */
- bool time_needed = attr->sample_type & PERF_SAMPLE_TIME;
-
-fallback_missing_features:
- if (opts->exclude_guest_missing)
- attr->exclude_guest = attr->exclude_host = 0;
-retry_sample_id:
- attr->sample_id_all = opts->sample_id_all_missing ? 0 : 1;
try_again:
if (perf_evsel__open(pos, evlist->cpus, evlist->threads) < 0) {
- int err = errno;
-
- if (err == EPERM || err == EACCES) {
- ui__error_paranoid();
- rc = -err;
- goto out;
- } else if (err == ENODEV && opts->target.cpu_list) {
- pr_err("No such device - did you specify"
- " an out-of-range profile CPU?\n");
- rc = -err;
- goto out;
- } else if (err == EINVAL) {
- if (!opts->exclude_guest_missing &&
- (attr->exclude_guest || attr->exclude_host)) {
- pr_debug("Old kernel, cannot exclude "
- "guest or host samples.\n");
- opts->exclude_guest_missing = true;
- goto fallback_missing_features;
- } else if (!opts->sample_id_all_missing) {
- /*
- * Old kernel, no attr->sample_id_type_all field
- */
- opts->sample_id_all_missing = true;
- if (!opts->sample_time && !opts->raw_samples && !time_needed)
- attr->sample_type &= ~PERF_SAMPLE_TIME;
-
- goto retry_sample_id;
- }
- }
-
- /*
- * If it's cycles then fall back to hrtimer
- * based cpu-clock-tick sw counter, which
- * is always available even if no PMU support.
- *
- * PPC returns ENXIO until 2.6.37 (behavior changed
- * with commit b0a873e).
- */
- if ((err == ENOENT || err == ENXIO)
- && attr->type == PERF_TYPE_HARDWARE
- && attr->config == PERF_COUNT_HW_CPU_CYCLES) {
-
+ if (perf_evsel__fallback(pos, errno, msg, sizeof(msg))) {
if (verbose)
- ui__warning("The cycles event is not supported, "
- "trying to fall back to cpu-clock-ticks\n");
- attr->type = PERF_TYPE_SOFTWARE;
- attr->config = PERF_COUNT_SW_CPU_CLOCK;
- if (pos->name) {
- free(pos->name);
- pos->name = NULL;
- }
+ ui__warning("%s\n", msg);
goto try_again;
}
- if (err == ENOENT) {
- ui__error("The %s event is not supported.\n",
- perf_evsel__name(pos));
- rc = -err;
- goto out;
- } else if ((err == EOPNOTSUPP) && (attr->precise_ip)) {
- ui__error("\'precise\' request may not be supported. "
- "Try removing 'p' modifier\n");
- rc = -err;
- goto out;
- }
-
- printf("\n");
- error("sys_perf_event_open() syscall returned with %d "
- "(%s) for event %s. /bin/dmesg may provide "
- "additional information.\n",
- err, strerror(err), perf_evsel__name(pos));
-
-#if defined(__i386__) || defined(__x86_64__)
- if (attr->type == PERF_TYPE_HARDWARE &&
- err == EOPNOTSUPP) {
- pr_err("No hardware sampling interrupt available."
- " No APIC? If so then you can boot the kernel"
- " with the \"lapic\" boot parameter to"
- " force-enable it.\n");
- rc = -err;
- goto out;
- }
-#endif
-
- pr_err("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
- rc = -err;
+ rc = -errno;
+ perf_evsel__open_strerror(pos, &opts->target,
+ errno, msg, sizeof(msg));
+ ui__error("%s\n", msg);
goto out;
}
}
@@ -430,10 +328,6 @@
{
int err;
struct perf_tool *tool = data;
-
- if (machine__is_host(machine))
- return;
-
/*
*As for guest kernel when processing subcommand record&report,
*we arrange module mmap prior to guest kernel mmap and trigger
@@ -592,6 +486,9 @@
goto out_delete_session;
}
+ if (!evsel_list->nr_groups)
+ perf_header__clear_feat(&session->header, HEADER_GROUP_DESC);
+
/*
* perf_session__delete(session) will be called at perf_record__exit()
*/
@@ -618,12 +515,7 @@
rec->post_processing_offset = lseek(output, 0, SEEK_CUR);
- machine = perf_session__find_host_machine(session);
- if (!machine) {
- pr_err("Couldn't find native kernel information.\n");
- err = -1;
- goto out_delete_session;
- }
+ machine = &session->machines.host;
if (opts->pipe_output) {
err = perf_event__synthesize_attrs(tool, session,
@@ -676,9 +568,10 @@
"Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
"Check /proc/modules permission or run as root.\n");
- if (perf_guest)
- perf_session__process_machines(session, tool,
- perf_event__synthesize_guest_os);
+ if (perf_guest) {
+ machines__process_guests(&session->machines,
+ perf_event__synthesize_guest_os, tool);
+ }
if (!opts->target.system_wide)
err = perf_event__synthesize_thread_map(tool, evsel_list->threads,
@@ -875,11 +768,10 @@
}
#endif /* LIBUNWIND_SUPPORT */
-static int
-parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
- int unset)
+int record_parse_callchain_opt(const struct option *opt,
+ const char *arg, int unset)
{
- struct perf_record *rec = (struct perf_record *)opt->value;
+ struct perf_record_opts *opts = opt->value;
char *tok, *name, *saveptr = NULL;
char *buf;
int ret = -1;
@@ -905,7 +797,7 @@
/* Framepointer style */
if (!strncmp(name, "fp", sizeof("fp"))) {
if (!strtok_r(NULL, ",", &saveptr)) {
- rec->opts.call_graph = CALLCHAIN_FP;
+ opts->call_graph = CALLCHAIN_FP;
ret = 0;
} else
pr_err("callchain: No more arguments "
@@ -918,20 +810,20 @@
const unsigned long default_stack_dump_size = 8192;
ret = 0;
- rec->opts.call_graph = CALLCHAIN_DWARF;
- rec->opts.stack_dump_size = default_stack_dump_size;
+ opts->call_graph = CALLCHAIN_DWARF;
+ opts->stack_dump_size = default_stack_dump_size;
tok = strtok_r(NULL, ",", &saveptr);
if (tok) {
unsigned long size = 0;
ret = get_stack_size(tok, &size);
- rec->opts.stack_dump_size = size;
+ opts->stack_dump_size = size;
}
if (!ret)
pr_debug("callchain: stack dump size %d\n",
- rec->opts.stack_dump_size);
+ opts->stack_dump_size);
#endif /* LIBUNWIND_SUPPORT */
} else {
pr_err("callchain: Unknown -g option "
@@ -944,7 +836,7 @@
free(buf);
if (!ret)
- pr_debug("callchain: type %d\n", rec->opts.call_graph);
+ pr_debug("callchain: type %d\n", opts->call_graph);
return ret;
}
@@ -982,9 +874,9 @@
#define CALLCHAIN_HELP "do call-graph (stack chain/backtrace) recording: "
#ifdef LIBUNWIND_SUPPORT
-static const char callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
+const char record_callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
#else
-static const char callchain_help[] = CALLCHAIN_HELP "[fp]";
+const char record_callchain_help[] = CALLCHAIN_HELP "[fp]";
#endif
/*
@@ -1028,9 +920,9 @@
"number of mmap data pages"),
OPT_BOOLEAN(0, "group", &record.opts.group,
"put the counters into a counter group"),
- OPT_CALLBACK_DEFAULT('g', "call-graph", &record, "mode[,dump_size]",
- callchain_help, &parse_callchain_opt,
- "fp"),
+ OPT_CALLBACK_DEFAULT('g', "call-graph", &record.opts,
+ "mode[,dump_size]", record_callchain_help,
+ &record_parse_callchain_opt, "fp"),
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
OPT_BOOLEAN('q', "quiet", &quiet, "don't print any message"),
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index fc25100..96b5a7f 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -8,6 +8,7 @@
#include "builtin.h"
#include "util/util.h"
+#include "util/cache.h"
#include "util/annotate.h"
#include "util/color.h"
@@ -54,6 +55,16 @@
DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
};
+static int perf_report_config(const char *var, const char *value, void *cb)
+{
+ if (!strcmp(var, "report.group")) {
+ symbol_conf.event_group = perf_config_bool(var, value);
+ return 0;
+ }
+
+ return perf_default_config(var, value, cb);
+}
+
static int perf_report__add_branch_hist_entry(struct perf_tool *tool,
struct addr_location *al,
struct perf_sample *sample,
@@ -299,6 +310,21 @@
char unit;
unsigned long nr_samples = self->stats.nr_events[PERF_RECORD_SAMPLE];
u64 nr_events = self->stats.total_period;
+ struct perf_evsel *evsel = hists_to_evsel(self);
+ char buf[512];
+ size_t size = sizeof(buf);
+
+ if (symbol_conf.event_group && evsel->nr_members > 1) {
+ struct perf_evsel *pos;
+
+ perf_evsel__group_desc(evsel, buf, size);
+ evname = buf;
+
+ for_each_group_member(pos, evsel) {
+ nr_samples += pos->hists.stats.nr_events[PERF_RECORD_SAMPLE];
+ nr_events += pos->hists.stats.total_period;
+ }
+ }
nr_samples = convert_unit(nr_samples, &unit);
ret = fprintf(fp, "# Samples: %lu%c", nr_samples, unit);
@@ -319,6 +345,10 @@
struct hists *hists = &pos->hists;
const char *evname = perf_evsel__name(pos);
+ if (symbol_conf.event_group &&
+ !perf_evsel__is_group_leader(pos))
+ continue;
+
hists__fprintf_nr_sample_events(hists, evname, stdout);
hists__fprintf(hists, true, 0, 0, stdout);
fprintf(stdout, "\n\n");
@@ -372,7 +402,7 @@
if (ret)
goto out_delete;
- kernel_map = session->host_machine.vmlinux_maps[MAP__FUNCTION];
+ kernel_map = session->machines.host.vmlinux_maps[MAP__FUNCTION];
kernel_kmap = map__kmap(kernel_map);
if (kernel_map == NULL ||
(kernel_map->dso->hit &&
@@ -416,8 +446,16 @@
hists->symbol_filter_str = rep->symbol_filter_str;
hists__collapse_resort(hists);
- hists__output_resort(hists);
nr_samples += hists->stats.nr_events[PERF_RECORD_SAMPLE];
+
+ /* Non-group events are considered as leader */
+ if (symbol_conf.event_group &&
+ !perf_evsel__is_group_leader(pos)) {
+ struct hists *leader_hists = &pos->leader->hists;
+
+ hists__match(leader_hists, hists);
+ hists__link(leader_hists, hists);
+ }
}
if (nr_samples == 0) {
@@ -425,11 +463,22 @@
goto out_delete;
}
+ list_for_each_entry(pos, &session->evlist->entries, node)
+ hists__output_resort(&pos->hists);
+
if (use_browser > 0) {
if (use_browser == 1) {
- perf_evlist__tui_browse_hists(session->evlist, help,
- NULL,
- &session->header.env);
+ ret = perf_evlist__tui_browse_hists(session->evlist,
+ help,
+ NULL,
+ &session->header.env);
+ /*
+ * Usually "ret" is the last pressed key, and we only
+ * care if the key notifies us to switch data file.
+ */
+ if (ret != K_SWITCH_INPUT_DATA)
+ ret = 0;
+
} else if (use_browser == 2) {
perf_evlist__gtk_browse_hists(session->evlist, help,
NULL);
@@ -595,8 +644,8 @@
OPT_BOOLEAN(0, "stdio", &report.use_stdio,
"Use the stdio interface"),
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
- "sort by key(s): pid, comm, dso, symbol, parent, dso_to,"
- " dso_from, symbol_to, symbol_from, mispredict"),
+ "sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline,"
+ " dso_to, dso_from, symbol_to, symbol_from, mispredict"),
OPT_BOOLEAN(0, "showcpuutilization", &symbol_conf.show_cpu_utilization,
"Show sample percentage for different cpu modes"),
OPT_STRING('p', "parent", &parent_pattern, "regex",
@@ -638,6 +687,8 @@
"Specify disassembler style (e.g. -M intel for intel syntax)"),
OPT_BOOLEAN(0, "show-total-period", &symbol_conf.show_total_period,
"Show a column with the sum of periods"),
+ OPT_BOOLEAN(0, "group", &symbol_conf.event_group,
+ "Show event group information together"),
OPT_CALLBACK_NOOPT('b', "branch-stack", &sort__branch_mode, "",
"use branch records for histogram filling", parse_branch_mode),
OPT_STRING(0, "objdump", &objdump_path, "path",
@@ -645,6 +696,8 @@
OPT_END()
};
+ perf_config(perf_report_config, NULL);
+
argc = parse_options(argc, argv, options, report_usage, 0);
if (report.use_stdio)
@@ -663,6 +716,16 @@
else
input_name = "perf.data";
}
+
+ if (strcmp(input_name, "-") != 0)
+ setup_browser(true);
+ else {
+ use_browser = 0;
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD);
+ perf_hpp__init();
+ }
+
+repeat:
session = perf_session__new(input_name, O_RDONLY,
report.force, false, &report.tool);
if (session == NULL)
@@ -688,14 +751,8 @@
}
- if (strcmp(input_name, "-") != 0)
- setup_browser(true);
- else {
- use_browser = 0;
- perf_hpp__init();
- }
-
- setup_sorting(report_usage, options);
+ if (setup_sorting() < 0)
+ usage_with_options(report_usage, options);
/*
* Only in the newt browser we are doing integrated annotation,
@@ -763,6 +820,12 @@
}
ret = __cmd_report(&report);
+ if (ret == K_SWITCH_INPUT_DATA) {
+ perf_session__delete(session);
+ goto repeat;
+ } else
+ ret = 0;
+
error:
perf_session__delete(session);
return ret;
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index cc28b85..1382294 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1475,9 +1475,9 @@
goto out_delete;
}
- sched->nr_events = session->hists.stats.nr_events[0];
- sched->nr_lost_events = session->hists.stats.total_lost;
- sched->nr_lost_chunks = session->hists.stats.nr_events[PERF_RECORD_LOST];
+ sched->nr_events = session->stats.nr_events[0];
+ sched->nr_lost_events = session->stats.total_lost;
+ sched->nr_lost_chunks = session->stats.nr_events[PERF_RECORD_LOST];
}
if (destroy)
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index b363e7b..92d4658 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -692,7 +692,7 @@
const char *arg, int unset __maybe_unused)
{
char *tok;
- int i, imax = sizeof(all_output_options) / sizeof(struct output_option);
+ int i, imax = ARRAY_SIZE(all_output_options);
int j;
int rc = 0;
char *str = strdup(arg);
@@ -909,18 +909,6 @@
return NULL;
}
-static char *ltrim(char *str)
-{
- int len = strlen(str);
-
- while (len && isspace(*str)) {
- len--;
- str++;
- }
-
- return str;
-}
-
static int read_script_info(struct script_desc *desc, const char *filename)
{
char line[BUFSIZ], *p;
@@ -1487,7 +1475,8 @@
return -1;
}
- perf_session__fprintf_info(session, stdout, show_full_info);
+ if (!script_name && !generate_script_lang)
+ perf_session__fprintf_info(session, stdout, show_full_info);
if (!no_callchain)
symbol_conf.use_callchain = true;
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c247fac..9984876 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -65,6 +65,11 @@
#define CNTR_NOT_SUPPORTED "<not supported>"
#define CNTR_NOT_COUNTED "<not counted>"
+static void print_stat(int argc, const char **argv);
+static void print_counter_aggr(struct perf_evsel *counter, char *prefix);
+static void print_counter(struct perf_evsel *counter, char *prefix);
+static void print_aggr_socket(char *prefix);
+
static struct perf_evlist *evsel_list;
static struct perf_target target = {
@@ -75,6 +80,7 @@
static bool no_inherit = false;
static bool scale = true;
static bool no_aggr = false;
+static bool aggr_socket = false;
static pid_t child_pid = -1;
static bool null_run = false;
static int detailed_run = 0;
@@ -87,6 +93,9 @@
static const char *pre_cmd = NULL;
static const char *post_cmd = NULL;
static bool sync_run = false;
+static unsigned int interval = 0;
+static struct timespec ref_time;
+static struct cpu_map *sock_map;
static volatile int done = 0;
@@ -94,6 +103,28 @@
struct stats res_stats[3];
};
+static inline void diff_timespec(struct timespec *r, struct timespec *a,
+ struct timespec *b)
+{
+ r->tv_sec = a->tv_sec - b->tv_sec;
+ if (a->tv_nsec < b->tv_nsec) {
+ r->tv_nsec = a->tv_nsec + 1000000000L - b->tv_nsec;
+ r->tv_sec--;
+ } else {
+ r->tv_nsec = a->tv_nsec - b->tv_nsec ;
+ }
+}
+
+static inline struct cpu_map *perf_evsel__cpus(struct perf_evsel *evsel)
+{
+ return (evsel->cpus && !target.cpu_list) ? evsel->cpus : evsel_list->cpus;
+}
+
+static inline int perf_evsel__nr_cpus(struct perf_evsel *evsel)
+{
+ return perf_evsel__cpus(evsel)->nr;
+}
+
static int perf_evsel__alloc_stat_priv(struct perf_evsel *evsel)
{
evsel->priv = zalloc(sizeof(struct perf_stat));
@@ -106,14 +137,27 @@
evsel->priv = NULL;
}
-static inline struct cpu_map *perf_evsel__cpus(struct perf_evsel *evsel)
+static int perf_evsel__alloc_prev_raw_counts(struct perf_evsel *evsel)
{
- return (evsel->cpus && !target.cpu_list) ? evsel->cpus : evsel_list->cpus;
+ void *addr;
+ size_t sz;
+
+ sz = sizeof(*evsel->counts) +
+ (perf_evsel__nr_cpus(evsel) * sizeof(struct perf_counts_values));
+
+ addr = zalloc(sz);
+ if (!addr)
+ return -ENOMEM;
+
+ evsel->prev_raw_counts = addr;
+
+ return 0;
}
-static inline int perf_evsel__nr_cpus(struct perf_evsel *evsel)
+static void perf_evsel__free_prev_raw_counts(struct perf_evsel *evsel)
{
- return perf_evsel__cpus(evsel)->nr;
+ free(evsel->prev_raw_counts);
+ evsel->prev_raw_counts = NULL;
}
static struct stats runtime_nsecs_stats[MAX_NR_CPUS];
@@ -132,8 +176,6 @@
static int create_perf_stat_counter(struct perf_evsel *evsel)
{
struct perf_event_attr *attr = &evsel->attr;
- bool exclude_guest_missing = false;
- int ret;
if (scale)
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
@@ -141,38 +183,16 @@
attr->inherit = !no_inherit;
-retry:
- if (exclude_guest_missing)
- evsel->attr.exclude_guest = evsel->attr.exclude_host = 0;
-
- if (perf_target__has_cpu(&target)) {
- ret = perf_evsel__open_per_cpu(evsel, perf_evsel__cpus(evsel));
- if (ret)
- goto check_ret;
- return 0;
- }
+ if (perf_target__has_cpu(&target))
+ return perf_evsel__open_per_cpu(evsel, perf_evsel__cpus(evsel));
if (!perf_target__has_task(&target) &&
- !perf_evsel__is_group_member(evsel)) {
+ perf_evsel__is_group_leader(evsel)) {
attr->disabled = 1;
attr->enable_on_exec = 1;
}
- ret = perf_evsel__open_per_thread(evsel, evsel_list->threads);
- if (!ret)
- return 0;
- /* fall through */
-check_ret:
- if (ret && errno == EINVAL) {
- if (!exclude_guest_missing &&
- (evsel->attr.exclude_guest || evsel->attr.exclude_host)) {
- pr_debug("Old kernel, cannot exclude "
- "guest or host samples.\n");
- exclude_guest_missing = true;
- goto retry;
- }
- }
- return ret;
+ return perf_evsel__open_per_thread(evsel, evsel_list->threads);
}
/*
@@ -269,15 +289,79 @@
return 0;
}
+static void print_interval(void)
+{
+ static int num_print_interval;
+ struct perf_evsel *counter;
+ struct perf_stat *ps;
+ struct timespec ts, rs;
+ char prefix[64];
+
+ if (no_aggr) {
+ list_for_each_entry(counter, &evsel_list->entries, node) {
+ ps = counter->priv;
+ memset(ps->res_stats, 0, sizeof(ps->res_stats));
+ read_counter(counter);
+ }
+ } else {
+ list_for_each_entry(counter, &evsel_list->entries, node) {
+ ps = counter->priv;
+ memset(ps->res_stats, 0, sizeof(ps->res_stats));
+ read_counter_aggr(counter);
+ }
+ }
+ clock_gettime(CLOCK_MONOTONIC, &ts);
+ diff_timespec(&rs, &ts, &ref_time);
+ sprintf(prefix, "%6lu.%09lu%s", rs.tv_sec, rs.tv_nsec, csv_sep);
+
+ if (num_print_interval == 0 && !csv_output) {
+ if (aggr_socket)
+ fprintf(output, "# time socket cpus counts events\n");
+ else if (no_aggr)
+ fprintf(output, "# time CPU counts events\n");
+ else
+ fprintf(output, "# time counts events\n");
+ }
+
+ if (++num_print_interval == 25)
+ num_print_interval = 0;
+
+ if (aggr_socket)
+ print_aggr_socket(prefix);
+ else if (no_aggr) {
+ list_for_each_entry(counter, &evsel_list->entries, node)
+ print_counter(counter, prefix);
+ } else {
+ list_for_each_entry(counter, &evsel_list->entries, node)
+ print_counter_aggr(counter, prefix);
+ }
+}
+
static int __run_perf_stat(int argc __maybe_unused, const char **argv)
{
+ char msg[512];
unsigned long long t0, t1;
struct perf_evsel *counter;
+ struct timespec ts;
int status = 0;
int child_ready_pipe[2], go_pipe[2];
const bool forks = (argc > 0);
char buf;
+ if (interval) {
+ ts.tv_sec = interval / 1000;
+ ts.tv_nsec = (interval % 1000) * 1000000;
+ } else {
+ ts.tv_sec = 1;
+ ts.tv_nsec = 0;
+ }
+
+ if (aggr_socket
+ && cpu_map__build_socket_map(evsel_list->cpus, &sock_map)) {
+ perror("cannot build socket map");
+ return -1;
+ }
+
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
return -1;
@@ -348,20 +432,13 @@
continue;
}
- if (errno == EPERM || errno == EACCES) {
- error("You may not have permission to collect %sstats.\n"
- "\t Consider tweaking"
- " /proc/sys/kernel/perf_event_paranoid or running as root.",
- target.system_wide ? "system-wide " : "");
- } else {
- error("open_counter returned with %d (%s). "
- "/bin/dmesg may provide additional information.\n",
- errno, strerror(errno));
- }
+ perf_evsel__open_strerror(counter, &target,
+ errno, msg, sizeof(msg));
+ ui__error("%s\n", msg);
+
if (child_pid != -1)
kill(child_pid, SIGTERM);
- pr_err("Not all events could be opened.\n");
return -1;
}
counter->supported = true;
@@ -377,14 +454,25 @@
* Enable counters and exec the command:
*/
t0 = rdclock();
+ clock_gettime(CLOCK_MONOTONIC, &ref_time);
if (forks) {
close(go_pipe[1]);
+ if (interval) {
+ while (!waitpid(child_pid, &status, WNOHANG)) {
+ nanosleep(&ts, NULL);
+ print_interval();
+ }
+ }
wait(&status);
if (WIFSIGNALED(status))
psignal(WTERMSIG(status), argv[0]);
} else {
- while(!done) sleep(1);
+ while (!done) {
+ nanosleep(&ts, NULL);
+ if (interval)
+ print_interval();
+ }
}
t1 = rdclock();
@@ -454,13 +542,21 @@
print_noise_pct(stddev_stats(&ps->res_stats[0]), avg);
}
-static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg)
+static void nsec_printout(int cpu, int nr, struct perf_evsel *evsel, double avg)
{
double msecs = avg / 1e6;
char cpustr[16] = { '\0', };
const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-25s";
- if (no_aggr)
+ if (aggr_socket)
+ sprintf(cpustr, "S%*d%s%*d%s",
+ csv_output ? 0 : -5,
+ cpu,
+ csv_sep,
+ csv_output ? 0 : 4,
+ nr,
+ csv_sep);
+ else if (no_aggr)
sprintf(cpustr, "CPU%*d%s",
csv_output ? 0 : -4,
perf_evsel__cpus(evsel)->map[cpu], csv_sep);
@@ -470,7 +566,7 @@
if (evsel->cgrp)
fprintf(output, "%s%s", csv_sep, evsel->cgrp->name);
- if (csv_output)
+ if (csv_output || interval)
return;
if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK))
@@ -659,7 +755,7 @@
fprintf(output, " of all LL-cache hits ");
}
-static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
+static void abs_printout(int cpu, int nr, struct perf_evsel *evsel, double avg)
{
double total, ratio = 0.0;
char cpustr[16] = { '\0', };
@@ -672,7 +768,15 @@
else
fmt = "%s%18.0f%s%-25s";
- if (no_aggr)
+ if (aggr_socket)
+ sprintf(cpustr, "S%*d%s%*d%s",
+ csv_output ? 0 : -5,
+ cpu,
+ csv_sep,
+ csv_output ? 0 : 4,
+ nr,
+ csv_sep);
+ else if (no_aggr)
sprintf(cpustr, "CPU%*d%s",
csv_output ? 0 : -4,
perf_evsel__cpus(evsel)->map[cpu], csv_sep);
@@ -684,12 +788,11 @@
if (evsel->cgrp)
fprintf(output, "%s%s", csv_sep, evsel->cgrp->name);
- if (csv_output)
+ if (csv_output || interval)
return;
if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) {
total = avg_stats(&runtime_cycles_stats[cpu]);
-
if (total)
ratio = avg / total;
@@ -779,16 +882,83 @@
}
}
+static void print_aggr_socket(char *prefix)
+{
+ struct perf_evsel *counter;
+ u64 ena, run, val;
+ int cpu, s, s2, sock, nr;
+
+ if (!sock_map)
+ return;
+
+ for (s = 0; s < sock_map->nr; s++) {
+ sock = cpu_map__socket(sock_map, s);
+ list_for_each_entry(counter, &evsel_list->entries, node) {
+ val = ena = run = 0;
+ nr = 0;
+ for (cpu = 0; cpu < perf_evsel__nr_cpus(counter); cpu++) {
+ s2 = cpu_map__get_socket(evsel_list->cpus, cpu);
+ if (s2 != sock)
+ continue;
+ val += counter->counts->cpu[cpu].val;
+ ena += counter->counts->cpu[cpu].ena;
+ run += counter->counts->cpu[cpu].run;
+ nr++;
+ }
+ if (prefix)
+ fprintf(output, "%s", prefix);
+
+ if (run == 0 || ena == 0) {
+ fprintf(output, "S%*d%s%*d%s%*s%s%*s",
+ csv_output ? 0 : -5,
+ s,
+ csv_sep,
+ csv_output ? 0 : 4,
+ nr,
+ csv_sep,
+ csv_output ? 0 : 18,
+ counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED,
+ csv_sep,
+ csv_output ? 0 : -24,
+ perf_evsel__name(counter));
+ if (counter->cgrp)
+ fprintf(output, "%s%s",
+ csv_sep, counter->cgrp->name);
+
+ fputc('\n', output);
+ continue;
+ }
+
+ if (nsec_counter(counter))
+ nsec_printout(sock, nr, counter, val);
+ else
+ abs_printout(sock, nr, counter, val);
+
+ if (!csv_output) {
+ print_noise(counter, 1.0);
+
+ if (run != ena)
+ fprintf(output, " (%.2f%%)",
+ 100.0 * run / ena);
+ }
+ fputc('\n', output);
+ }
+ }
+}
+
/*
* Print out the results of a single counter:
* aggregated counts in system-wide mode
*/
-static void print_counter_aggr(struct perf_evsel *counter)
+static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
{
struct perf_stat *ps = counter->priv;
double avg = avg_stats(&ps->res_stats[0]);
int scaled = counter->counts->scaled;
+ if (prefix)
+ fprintf(output, "%s", prefix);
+
if (scaled == -1) {
fprintf(output, "%*s%s%*s",
csv_output ? 0 : 18,
@@ -805,9 +975,9 @@
}
if (nsec_counter(counter))
- nsec_printout(-1, counter, avg);
+ nsec_printout(-1, 0, counter, avg);
else
- abs_printout(-1, counter, avg);
+ abs_printout(-1, 0, counter, avg);
print_noise(counter, avg);
@@ -831,7 +1001,7 @@
* Print out the results of a single counter:
* does not use aggregated count in system-wide
*/
-static void print_counter(struct perf_evsel *counter)
+static void print_counter(struct perf_evsel *counter, char *prefix)
{
u64 ena, run, val;
int cpu;
@@ -840,6 +1010,10 @@
val = counter->counts->cpu[cpu].val;
ena = counter->counts->cpu[cpu].ena;
run = counter->counts->cpu[cpu].run;
+
+ if (prefix)
+ fprintf(output, "%s", prefix);
+
if (run == 0 || ena == 0) {
fprintf(output, "CPU%*d%s%*s%s%*s",
csv_output ? 0 : -4,
@@ -859,9 +1033,9 @@
}
if (nsec_counter(counter))
- nsec_printout(cpu, counter, val);
+ nsec_printout(cpu, 0, counter, val);
else
- abs_printout(cpu, counter, val);
+ abs_printout(cpu, 0, counter, val);
if (!csv_output) {
print_noise(counter, 1.0);
@@ -899,12 +1073,14 @@
fprintf(output, ":\n\n");
}
- if (no_aggr) {
+ if (aggr_socket)
+ print_aggr_socket(NULL);
+ else if (no_aggr) {
list_for_each_entry(counter, &evsel_list->entries, node)
- print_counter(counter);
+ print_counter(counter, NULL);
} else {
list_for_each_entry(counter, &evsel_list->entries, node)
- print_counter_aggr(counter);
+ print_counter_aggr(counter, NULL);
}
if (!csv_output) {
@@ -925,7 +1101,7 @@
static void skip_signal(int signo)
{
- if(child_pid == -1)
+ if ((child_pid == -1) || interval)
done = 1;
signr = signo;
@@ -1145,6 +1321,9 @@
"command to run prior to the measured command"),
OPT_STRING(0, "post", &post_cmd, "command",
"command to run after to the measured command"),
+ OPT_UINTEGER('I', "interval-print", &interval,
+ "print counts at regular interval in ms (>= 100)"),
+ OPT_BOOLEAN(0, "aggr-socket", &aggr_socket, "aggregate counts per processor socket"),
OPT_END()
};
const char * const stat_usage[] = {
@@ -1231,6 +1410,14 @@
usage_with_options(stat_usage, options);
}
+ if (aggr_socket) {
+ if (!perf_target__has_cpu(&target)) {
+ fprintf(stderr, "--aggr-socket only available in system-wide mode (-a)\n");
+ usage_with_options(stat_usage, options);
+ }
+ no_aggr = true;
+ }
+
if (add_default_attributes())
goto out;
@@ -1245,12 +1432,23 @@
usage_with_options(stat_usage, options);
return -1;
}
+ if (interval && interval < 100) {
+ pr_err("print interval must be >= 100ms\n");
+ usage_with_options(stat_usage, options);
+ return -1;
+ }
list_for_each_entry(pos, &evsel_list->entries, node) {
if (perf_evsel__alloc_stat_priv(pos) < 0 ||
perf_evsel__alloc_counts(pos, perf_evsel__nr_cpus(pos)) < 0)
goto out_free_fd;
}
+ if (interval) {
+ list_for_each_entry(pos, &evsel_list->entries, node) {
+ if (perf_evsel__alloc_prev_raw_counts(pos) < 0)
+ goto out_free_fd;
+ }
+ }
/*
* We dont want to block the signals - that would cause
@@ -1260,6 +1458,7 @@
*/
atexit(sig_atexit);
signal(SIGINT, skip_signal);
+ signal(SIGCHLD, skip_signal);
signal(SIGALRM, skip_signal);
signal(SIGABRT, skip_signal);
@@ -1272,11 +1471,14 @@
status = run_perf_stat(argc, argv);
}
- if (status != -1)
+ if (status != -1 && !interval)
print_stat(argc, argv);
out_free_fd:
- list_for_each_entry(pos, &evsel_list->entries, node)
+ list_for_each_entry(pos, &evsel_list->entries, node) {
perf_evsel__free_stat_priv(pos);
+ perf_evsel__free_counts(pos);
+ perf_evsel__free_prev_raw_counts(pos);
+ }
perf_evlist__delete_maps(evsel_list);
out:
perf_evlist__delete(evsel_list);
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index c9ff395..72f6eb7 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -68,27 +68,7 @@
#include <linux/unistd.h>
#include <linux/types.h>
-void get_term_dimensions(struct winsize *ws)
-{
- char *s = getenv("LINES");
-
- if (s != NULL) {
- ws->ws_row = atoi(s);
- s = getenv("COLUMNS");
- if (s != NULL) {
- ws->ws_col = atoi(s);
- if (ws->ws_row && ws->ws_col)
- return;
- }
- }
-#ifdef TIOCGWINSZ
- if (ioctl(1, TIOCGWINSZ, ws) == 0 &&
- ws->ws_row && ws->ws_col)
- return;
-#endif
- ws->ws_row = 25;
- ws->ws_col = 80;
-}
+static volatile int done;
static void perf_top__update_print_entries(struct perf_top *top)
{
@@ -453,8 +433,10 @@
return 0;
}
-static void perf_top__handle_keypress(struct perf_top *top, int c)
+static bool perf_top__handle_keypress(struct perf_top *top, int c)
{
+ bool ret = true;
+
if (!perf_top__key_mapped(top, c)) {
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
struct termios tc, save;
@@ -475,7 +457,7 @@
tcsetattr(0, TCSAFLUSH, &save);
if (!perf_top__key_mapped(top, c))
- return;
+ return ret;
}
switch (c) {
@@ -537,7 +519,8 @@
printf("exiting.\n");
if (top->dump_symtab)
perf_session__fprintf_dsos(top->session, stderr);
- exit(0);
+ ret = false;
+ break;
case 's':
perf_top__prompt_symbol(top, "Enter details symbol");
break;
@@ -560,6 +543,8 @@
default:
break;
}
+
+ return ret;
}
static void perf_top__sort_new_samples(void *arg)
@@ -596,13 +581,12 @@
* via --uid.
*/
list_for_each_entry(pos, &top->evlist->entries, node)
- pos->hists.uid_filter_str = top->target.uid_str;
+ pos->hists.uid_filter_str = top->record_opts.target.uid_str;
perf_evlist__tui_browse_hists(top->evlist, help, &hbt,
&top->session->header.env);
- exit_browser(0);
- exit(0);
+ done = 1;
return NULL;
}
@@ -626,7 +610,7 @@
/* trash return*/
getc(stdin);
- while (1) {
+ while (!done) {
perf_top__print_sym_table(top);
/*
* Either timeout expired or we got an EINTR due to SIGWINCH,
@@ -640,15 +624,14 @@
continue;
/* Fall trhu */
default:
- goto process_hotkey;
+ c = getc(stdin);
+ tcsetattr(0, TCSAFLUSH, &save);
+
+ if (perf_top__handle_keypress(top, c))
+ goto repeat;
+ done = 1;
}
}
-process_hotkey:
- c = getc(stdin);
- tcsetattr(0, TCSAFLUSH, &save);
-
- perf_top__handle_keypress(top, c);
- goto repeat;
return NULL;
}
@@ -716,7 +699,7 @@
static struct intlist *seen;
if (!seen)
- seen = intlist__new();
+ seen = intlist__new(NULL);
if (!intlist__has_entry(seen, event->ip.pid)) {
pr_err("Can't find guest [%d]'s kernel information\n",
@@ -727,8 +710,8 @@
}
if (!machine) {
- pr_err("%u unprocessable samples recorded.",
- top->session->hists.stats.nr_unprocessable_samples++);
+ pr_err("%u unprocessable samples recorded.\r",
+ top->session->stats.nr_unprocessable_samples++);
return;
}
@@ -847,13 +830,13 @@
++top->us_samples;
if (top->hide_user_symbols)
continue;
- machine = perf_session__find_host_machine(session);
+ machine = &session->machines.host;
break;
case PERF_RECORD_MISC_KERNEL:
++top->kernel_samples;
if (top->hide_kernel_symbols)
continue;
- machine = perf_session__find_host_machine(session);
+ machine = &session->machines.host;
break;
case PERF_RECORD_MISC_GUEST_KERNEL:
++top->guest_kernel_samples;
@@ -878,7 +861,7 @@
hists__inc_nr_events(&evsel->hists, event->header.type);
machine__process_event(machine, event);
} else
- ++session->hists.stats.nr_unknown_events;
+ ++session->stats.nr_unknown_events;
}
}
@@ -890,123 +873,42 @@
perf_top__mmap_read_idx(top, i);
}
-static void perf_top__start_counters(struct perf_top *top)
+static int perf_top__start_counters(struct perf_top *top)
{
+ char msg[512];
struct perf_evsel *counter;
struct perf_evlist *evlist = top->evlist;
+ struct perf_record_opts *opts = &top->record_opts;
- if (top->group)
- perf_evlist__set_leader(evlist);
+ perf_evlist__config(evlist, opts);
list_for_each_entry(counter, &evlist->entries, node) {
- struct perf_event_attr *attr = &counter->attr;
-
- attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
-
- if (top->freq) {
- attr->sample_type |= PERF_SAMPLE_PERIOD;
- attr->freq = 1;
- attr->sample_freq = top->freq;
- }
-
- if (evlist->nr_entries > 1) {
- attr->sample_type |= PERF_SAMPLE_ID;
- attr->read_format |= PERF_FORMAT_ID;
- }
-
- if (perf_target__has_cpu(&top->target))
- attr->sample_type |= PERF_SAMPLE_CPU;
-
- if (symbol_conf.use_callchain)
- attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
-
- attr->mmap = 1;
- attr->comm = 1;
- attr->inherit = top->inherit;
-fallback_missing_features:
- if (top->exclude_guest_missing)
- attr->exclude_guest = attr->exclude_host = 0;
-retry_sample_id:
- attr->sample_id_all = top->sample_id_all_missing ? 0 : 1;
try_again:
if (perf_evsel__open(counter, top->evlist->cpus,
top->evlist->threads) < 0) {
- int err = errno;
-
- if (err == EPERM || err == EACCES) {
- ui__error_paranoid();
- goto out_err;
- } else if (err == EINVAL) {
- if (!top->exclude_guest_missing &&
- (attr->exclude_guest || attr->exclude_host)) {
- pr_debug("Old kernel, cannot exclude "
- "guest or host samples.\n");
- top->exclude_guest_missing = true;
- goto fallback_missing_features;
- } else if (!top->sample_id_all_missing) {
- /*
- * Old kernel, no attr->sample_id_type_all field
- */
- top->sample_id_all_missing = true;
- goto retry_sample_id;
- }
- }
- /*
- * If it's cycles then fall back to hrtimer
- * based cpu-clock-tick sw counter, which
- * is always available even if no PMU support:
- */
- if ((err == ENOENT || err == ENXIO) &&
- (attr->type == PERF_TYPE_HARDWARE) &&
- (attr->config == PERF_COUNT_HW_CPU_CYCLES)) {
-
+ if (perf_evsel__fallback(counter, errno, msg, sizeof(msg))) {
if (verbose)
- ui__warning("Cycles event not supported,\n"
- "trying to fall back to cpu-clock-ticks\n");
-
- attr->type = PERF_TYPE_SOFTWARE;
- attr->config = PERF_COUNT_SW_CPU_CLOCK;
- if (counter->name) {
- free(counter->name);
- counter->name = NULL;
- }
+ ui__warning("%s\n", msg);
goto try_again;
}
- if (err == ENOENT) {
- ui__error("The %s event is not supported.\n",
- perf_evsel__name(counter));
- goto out_err;
- } else if (err == EMFILE) {
- ui__error("Too many events are opened.\n"
- "Try again after reducing the number of events\n");
- goto out_err;
- } else if ((err == EOPNOTSUPP) && (attr->precise_ip)) {
- ui__error("\'precise\' request may not be supported. "
- "Try removing 'p' modifier\n");
- goto out_err;
- }
-
- ui__error("The sys_perf_event_open() syscall "
- "returned with %d (%s). /bin/dmesg "
- "may provide additional information.\n"
- "No CONFIG_PERF_EVENTS=y kernel support "
- "configured?\n", err, strerror(err));
+ perf_evsel__open_strerror(counter, &opts->target,
+ errno, msg, sizeof(msg));
+ ui__error("%s\n", msg);
goto out_err;
}
}
- if (perf_evlist__mmap(evlist, top->mmap_pages, false) < 0) {
+ if (perf_evlist__mmap(evlist, opts->mmap_pages, false) < 0) {
ui__error("Failed to mmap with %d (%s)\n",
errno, strerror(errno));
goto out_err;
}
- return;
+ return 0;
out_err:
- exit_browser(0);
- exit(0);
+ return -1;
}
static int perf_top__setup_sample_type(struct perf_top *top)
@@ -1016,7 +918,7 @@
ui__error("Selected -g but \"sym\" not present in --sort/-s.");
return -EINVAL;
}
- } else if (!top->dont_use_callchains && callchain_param.mode != CHAIN_NONE) {
+ } else if (callchain_param.mode != CHAIN_NONE) {
if (callchain_register_param(&callchain_param) < 0) {
ui__error("Can't register callchain params.\n");
return -EINVAL;
@@ -1028,6 +930,7 @@
static int __cmd_top(struct perf_top *top)
{
+ struct perf_record_opts *opts = &top->record_opts;
pthread_t thread;
int ret;
/*
@@ -1042,26 +945,42 @@
if (ret)
goto out_delete;
- if (perf_target__has_task(&top->target))
+ if (perf_target__has_task(&opts->target))
perf_event__synthesize_thread_map(&top->tool, top->evlist->threads,
perf_event__process,
- &top->session->host_machine);
+ &top->session->machines.host);
else
perf_event__synthesize_threads(&top->tool, perf_event__process,
- &top->session->host_machine);
- perf_top__start_counters(top);
+ &top->session->machines.host);
+
+ ret = perf_top__start_counters(top);
+ if (ret)
+ goto out_delete;
+
top->session->evlist = top->evlist;
perf_session__set_id_hdr_size(top->session);
+ /*
+ * When perf is starting the traced process, all the events (apart from
+ * group members) have enable_on_exec=1 set, so don't spoil it by
+ * prematurely enabling them.
+ *
+ * XXX 'top' still doesn't start workloads like record, trace, but should,
+ * so leave the check here.
+ */
+ if (!perf_target__none(&opts->target))
+ perf_evlist__enable(top->evlist);
+
/* Wait for a minimal set of events before starting the snapshot */
poll(top->evlist->pollfd, top->evlist->nr_fds, 100);
perf_top__mmap_read(top);
+ ret = -1;
if (pthread_create(&thread, NULL, (use_browser > 0 ? display_thread_tui :
display_thread), top)) {
ui__error("Could not create display thread.\n");
- exit(-1);
+ goto out_delete;
}
if (top->realtime_prio) {
@@ -1070,11 +989,11 @@
param.sched_priority = top->realtime_prio;
if (sched_setscheduler(0, SCHED_FIFO, ¶m)) {
ui__error("Could not set realtime priority.\n");
- exit(-1);
+ goto out_delete;
}
}
- while (1) {
+ while (!done) {
u64 hits = top->samples;
perf_top__mmap_read(top);
@@ -1083,126 +1002,67 @@
ret = poll(top->evlist->pollfd, top->evlist->nr_fds, 100);
}
+ ret = 0;
out_delete:
perf_session__delete(top->session);
top->session = NULL;
- return 0;
+ return ret;
}
static int
parse_callchain_opt(const struct option *opt, const char *arg, int unset)
{
- struct perf_top *top = (struct perf_top *)opt->value;
- char *tok, *tok2;
- char *endptr;
-
/*
* --no-call-graph
*/
- if (unset) {
- top->dont_use_callchains = true;
+ if (unset)
return 0;
- }
symbol_conf.use_callchain = true;
- if (!arg)
- return 0;
-
- tok = strtok((char *)arg, ",");
- if (!tok)
- return -1;
-
- /* get the output mode */
- if (!strncmp(tok, "graph", strlen(arg)))
- callchain_param.mode = CHAIN_GRAPH_ABS;
-
- else if (!strncmp(tok, "flat", strlen(arg)))
- callchain_param.mode = CHAIN_FLAT;
-
- else if (!strncmp(tok, "fractal", strlen(arg)))
- callchain_param.mode = CHAIN_GRAPH_REL;
-
- else if (!strncmp(tok, "none", strlen(arg))) {
- callchain_param.mode = CHAIN_NONE;
- symbol_conf.use_callchain = false;
-
- return 0;
- } else
- return -1;
-
- /* get the min percentage */
- tok = strtok(NULL, ",");
- if (!tok)
- goto setup;
-
- callchain_param.min_percent = strtod(tok, &endptr);
- if (tok == endptr)
- return -1;
-
- /* get the print limit */
- tok2 = strtok(NULL, ",");
- if (!tok2)
- goto setup;
-
- if (tok2[0] != 'c') {
- callchain_param.print_limit = strtod(tok2, &endptr);
- tok2 = strtok(NULL, ",");
- if (!tok2)
- goto setup;
- }
-
- /* get the call chain order */
- if (!strcmp(tok2, "caller"))
- callchain_param.order = ORDER_CALLER;
- else if (!strcmp(tok2, "callee"))
- callchain_param.order = ORDER_CALLEE;
- else
- return -1;
-setup:
- if (callchain_register_param(&callchain_param) < 0) {
- fprintf(stderr, "Can't register callchain params\n");
- return -1;
- }
- return 0;
+ return record_parse_callchain_opt(opt, arg, unset);
}
int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused)
{
- struct perf_evsel *pos;
int status;
char errbuf[BUFSIZ];
struct perf_top top = {
.count_filter = 5,
.delay_secs = 2,
- .freq = 4000, /* 4 KHz */
- .mmap_pages = 128,
- .sym_pcnt_filter = 5,
- .target = {
- .uses_mmap = true,
+ .record_opts = {
+ .mmap_pages = UINT_MAX,
+ .user_freq = UINT_MAX,
+ .user_interval = ULLONG_MAX,
+ .freq = 4000, /* 4 KHz */
+ .target = {
+ .uses_mmap = true,
+ },
},
+ .sym_pcnt_filter = 5,
};
- char callchain_default_opt[] = "fractal,0.5,callee";
+ struct perf_record_opts *opts = &top.record_opts;
+ struct perf_target *target = &opts->target;
const struct option options[] = {
OPT_CALLBACK('e', "event", &top.evlist, "event",
"event selector. use 'perf list' to list available events",
parse_events_option),
- OPT_INTEGER('c', "count", &top.default_interval,
- "event period to sample"),
- OPT_STRING('p', "pid", &top.target.pid, "pid",
+ OPT_U64('c', "count", &opts->user_interval, "event period to sample"),
+ OPT_STRING('p', "pid", &target->pid, "pid",
"profile events on existing process id"),
- OPT_STRING('t', "tid", &top.target.tid, "tid",
+ OPT_STRING('t', "tid", &target->tid, "tid",
"profile events on existing thread id"),
- OPT_BOOLEAN('a', "all-cpus", &top.target.system_wide,
+ OPT_BOOLEAN('a', "all-cpus", &target->system_wide,
"system-wide collection from all CPUs"),
- OPT_STRING('C', "cpu", &top.target.cpu_list, "cpu",
+ OPT_STRING('C', "cpu", &target->cpu_list, "cpu",
"list of cpus to monitor"),
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_BOOLEAN('K', "hide_kernel_symbols", &top.hide_kernel_symbols,
"hide kernel symbols"),
- OPT_UINTEGER('m', "mmap-pages", &top.mmap_pages, "number of mmap data pages"),
+ OPT_UINTEGER('m', "mmap-pages", &opts->mmap_pages,
+ "number of mmap data pages"),
OPT_INTEGER('r', "realtime", &top.realtime_prio,
"collect data with this RT SCHED_FIFO priority"),
OPT_INTEGER('d', "delay", &top.delay_secs,
@@ -1211,16 +1071,14 @@
"dump the symbol table used for profiling"),
OPT_INTEGER('f', "count-filter", &top.count_filter,
"only display functions with more events than this"),
- OPT_BOOLEAN('g', "group", &top.group,
+ OPT_BOOLEAN('g', "group", &opts->group,
"put the counters into a counter group"),
- OPT_BOOLEAN('i', "inherit", &top.inherit,
- "child tasks inherit counters"),
+ OPT_BOOLEAN('i', "no-inherit", &opts->no_inherit,
+ "child tasks do not inherit counters"),
OPT_STRING(0, "sym-annotate", &top.sym_filter, "symbol name",
"symbol to annotate"),
- OPT_BOOLEAN('z', "zero", &top.zero,
- "zero history across updates"),
- OPT_INTEGER('F', "freq", &top.freq,
- "profile at this frequency"),
+ OPT_BOOLEAN('z', "zero", &top.zero, "zero history across updates"),
+ OPT_UINTEGER('F', "freq", &opts->user_freq, "profile at this frequency"),
OPT_INTEGER('E', "entries", &top.print_entries,
"display this many functions"),
OPT_BOOLEAN('U', "hide_user_symbols", &top.hide_user_symbols,
@@ -1233,10 +1091,9 @@
"sort by key(s): pid, comm, dso, symbol, parent"),
OPT_BOOLEAN('n', "show-nr-samples", &symbol_conf.show_nr_samples,
"Show a column with the number of samples"),
- OPT_CALLBACK_DEFAULT('G', "call-graph", &top, "output_type,min_percent, call_order",
- "Display callchains using output_type (graph, flat, fractal, or none), min percent threshold and callchain order. "
- "Default: fractal,0.5,callee", &parse_callchain_opt,
- callchain_default_opt),
+ OPT_CALLBACK_DEFAULT('G', "call-graph", &top.record_opts,
+ "mode[,dump_size]", record_callchain_help,
+ &parse_callchain_opt, "fp"),
OPT_BOOLEAN(0, "show-total-period", &symbol_conf.show_total_period,
"Show a column with the sum of periods"),
OPT_STRING(0, "dsos", &symbol_conf.dso_list_str, "dso[,dso...]",
@@ -1251,7 +1108,7 @@
"Display raw encoding of assembly instructions (default)"),
OPT_STRING('M', "disassembler-style", &disassembler_style, "disassembler style",
"Specify disassembler style (e.g. -M intel for intel syntax)"),
- OPT_STRING('u', "uid", &top.target.uid_str, "user", "user to profile"),
+ OPT_STRING('u', "uid", &target->uid_str, "user", "user to profile"),
OPT_END()
};
const char * const top_usage[] = {
@@ -1272,7 +1129,8 @@
if (sort_order == default_sort_order)
sort_order = "dso,symbol";
- setup_sorting(top_usage, options);
+ if (setup_sorting() < 0)
+ usage_with_options(top_usage, options);
if (top.use_stdio)
use_browser = 0;
@@ -1281,33 +1139,33 @@
setup_browser(false);
- status = perf_target__validate(&top.target);
+ status = perf_target__validate(target);
if (status) {
- perf_target__strerror(&top.target, status, errbuf, BUFSIZ);
+ perf_target__strerror(target, status, errbuf, BUFSIZ);
ui__warning("%s", errbuf);
}
- status = perf_target__parse_uid(&top.target);
+ status = perf_target__parse_uid(target);
if (status) {
int saved_errno = errno;
- perf_target__strerror(&top.target, status, errbuf, BUFSIZ);
+ perf_target__strerror(target, status, errbuf, BUFSIZ);
ui__error("%s", errbuf);
status = -saved_errno;
goto out_delete_evlist;
}
- if (perf_target__none(&top.target))
- top.target.system_wide = true;
+ if (perf_target__none(target))
+ target->system_wide = true;
- if (perf_evlist__create_maps(top.evlist, &top.target) < 0)
+ if (perf_evlist__create_maps(top.evlist, target) < 0)
usage_with_options(top_usage, options);
if (!top.evlist->nr_entries &&
perf_evlist__add_default(top.evlist) < 0) {
ui__error("Not enough memory for event selector list\n");
- return -ENOMEM;
+ goto out_delete_maps;
}
symbol_conf.nr_events = top.evlist->nr_entries;
@@ -1315,24 +1173,22 @@
if (top.delay_secs < 1)
top.delay_secs = 1;
+ if (opts->user_interval != ULLONG_MAX)
+ opts->default_interval = opts->user_interval;
+ if (opts->user_freq != UINT_MAX)
+ opts->freq = opts->user_freq;
+
/*
* User specified count overrides default frequency.
*/
- if (top.default_interval)
- top.freq = 0;
- else if (top.freq) {
- top.default_interval = top.freq;
+ if (opts->default_interval)
+ opts->freq = 0;
+ else if (opts->freq) {
+ opts->default_interval = opts->freq;
} else {
ui__error("frequency and count are zero, aborting\n");
- exit(EXIT_FAILURE);
- }
-
- list_for_each_entry(pos, &top.evlist->entries, node) {
- /*
- * Fill in the ones not specifically initialized via -c:
- */
- if (!pos->attr.sample_period)
- pos->attr.sample_period = top.default_interval;
+ status = -EINVAL;
+ goto out_delete_maps;
}
top.sym_evsel = perf_evlist__first(top.evlist);
@@ -1365,6 +1221,8 @@
status = __cmd_top(&top);
+out_delete_maps:
+ perf_evlist__delete_maps(top.evlist);
out_delete_evlist:
perf_evlist__delete(top.evlist);
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 7932ffa..d222d7f 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -455,7 +455,7 @@
goto out_delete_evlist;
}
- perf_evlist__config_attrs(evlist, &trace->opts);
+ perf_evlist__config(evlist, &trace->opts);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
diff --git a/tools/perf/config/feature-tests.mak b/tools/perf/config/feature-tests.mak
index f5ac774..b4eabb4 100644
--- a/tools/perf/config/feature-tests.mak
+++ b/tools/perf/config/feature-tests.mak
@@ -225,3 +225,14 @@
return on_exit(NULL, NULL);
}
endef
+
+define SOURCE_LIBNUMA
+#include <numa.h>
+#include <numaif.h>
+
+int main(void)
+{
+ numa_available();
+ return 0;
+}
+endef
\ No newline at end of file
diff --git a/tools/perf/config/utilities.mak b/tools/perf/config/utilities.mak
index e541312..8ef3bd3 100644
--- a/tools/perf/config/utilities.mak
+++ b/tools/perf/config/utilities.mak
@@ -13,7 +13,7 @@
# what should replace a newline when escaping
# newlines; the default is a bizarre string.
#
-nl-escape = $(or $(1),m822df3020w6a44id34bt574ctac44eb9f4n)
+nl-escape = $(if $(1),$(1),m822df3020w6a44id34bt574ctac44eb9f4n)
# escape-nl
#
@@ -173,9 +173,9 @@
# Usage: absolute-executable-path-or-empty = $(call get-executable-or-default,variable,default)
#
define get-executable-or-default
-$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
+$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2),$(1)))
endef
-_ge_attempt = $(or $(get-executable),$(_gea_warn),$(call _gea_err,$(2)))
+_ge_attempt = $(if $(get-executable),$(get-executable),$(_gea_warn)$(call _gea_err,$(2)))
_gea_warn = $(warning The path '$(1)' is not executable.)
_gea_err = $(if $(1),$(error Please set '$(1)' appropriately))
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 0f661fb..095b882 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -328,14 +328,23 @@
if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode))
return 0;
+ status = 1;
/* Check for ENOSPC and EIO errors.. */
- if (fflush(stdout))
- die("write failure on standard output: %s", strerror(errno));
- if (ferror(stdout))
- die("unknown write failure on standard output");
- if (fclose(stdout))
- die("close failed on standard output: %s", strerror(errno));
- return 0;
+ if (fflush(stdout)) {
+ fprintf(stderr, "write failure on standard output: %s", strerror(errno));
+ goto out;
+ }
+ if (ferror(stdout)) {
+ fprintf(stderr, "unknown write failure on standard output");
+ goto out;
+ }
+ if (fclose(stdout)) {
+ fprintf(stderr, "close failed on standard output: %s", strerror(errno));
+ goto out;
+ }
+ status = 0;
+out:
+ return status;
}
static void handle_internal_command(int argc, const char **argv)
@@ -467,7 +476,8 @@
cmd += 5;
argv[0] = cmd;
handle_internal_command(argc, argv);
- die("cannot handle %s internally", cmd);
+ fprintf(stderr, "cannot handle %s internally", cmd);
+ goto out;
}
/* Look for flags.. */
@@ -485,7 +495,7 @@
printf("\n usage: %s\n\n", perf_usage_string);
list_common_cmds_help();
printf("\n %s\n\n", perf_more_info_string);
- exit(1);
+ goto out;
}
cmd = argv[0];
@@ -517,7 +527,7 @@
fprintf(stderr, "Expansion of alias '%s' failed; "
"'%s' is not a perf-command\n",
cmd, argv[0]);
- exit(1);
+ goto out;
}
if (!done_help) {
cmd = argv[0] = help_unknown_cmd(cmd);
@@ -528,6 +538,6 @@
fprintf(stderr, "Failed to run command '%s': %s\n",
cmd, strerror(errno));
-
+out:
return 1;
}
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 2c340e7..c2206c8 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -1,10 +1,6 @@
#ifndef _PERF_PERF_H
#define _PERF_PERF_H
-struct winsize;
-
-void get_term_dimensions(struct winsize *ws);
-
#include <asm/unistd.h>
#if defined(__i386__)
@@ -107,32 +103,6 @@
#include "util/types.h"
#include <stdbool.h>
-struct perf_mmap {
- void *base;
- int mask;
- unsigned int prev;
-};
-
-static inline unsigned int perf_mmap__read_head(struct perf_mmap *mm)
-{
- struct perf_event_mmap_page *pc = mm->base;
- int head = pc->data_head;
- rmb();
- return head;
-}
-
-static inline void perf_mmap__write_tail(struct perf_mmap *md,
- unsigned long tail)
-{
- struct perf_event_mmap_page *pc = md->base;
-
- /*
- * ensure all reads are done before we write the tail out.
- */
- /* mb(); */
- pc->data_tail = tail;
-}
-
/*
* prctl(PR_TASK_PERF_EVENTS_DISABLE) will (cheaply) disable all
* counters in the current task.
@@ -237,8 +207,6 @@
bool raw_samples;
bool sample_address;
bool sample_time;
- bool sample_id_all_missing;
- bool exclude_guest_missing;
bool period;
unsigned int freq;
unsigned int mmap_pages;
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-record b/tools/perf/scripts/perl/bin/workqueue-stats-record
deleted file mode 100644
index 8edda90..0000000
--- a/tools/perf/scripts/perl/bin/workqueue-stats-record
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/bash
-perf record -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-report b/tools/perf/scripts/perl/bin/workqueue-stats-report
deleted file mode 100644
index 6d91411..0000000
--- a/tools/perf/scripts/perl/bin/workqueue-stats-report
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/bash
-# description: workqueue stats (ins/exe/create/destroy)
-perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/workqueue-stats.pl
diff --git a/tools/perf/scripts/perl/rwtop.pl b/tools/perf/scripts/perl/rwtop.pl
index 4bb3ecd..8b20787 100644
--- a/tools/perf/scripts/perl/rwtop.pl
+++ b/tools/perf/scripts/perl/rwtop.pl
@@ -17,6 +17,7 @@
use lib "./Perf-Trace-Util/lib";
use Perf::Trace::Core;
use Perf::Trace::Util;
+use POSIX qw/SIGALRM SA_RESTART/;
my $default_interval = 3;
my $nlines = 20;
@@ -90,7 +91,10 @@
sub trace_begin
{
- $SIG{ALRM} = \&set_print_pending;
+ my $sa = POSIX::SigAction->new(\&set_print_pending);
+ $sa->flags(SA_RESTART);
+ $sa->safe(1);
+ POSIX::sigaction(SIGALRM, $sa) or die "Can't set SIGALRM handler: $!\n";
alarm 1;
}
diff --git a/tools/perf/scripts/perl/workqueue-stats.pl b/tools/perf/scripts/perl/workqueue-stats.pl
deleted file mode 100644
index a8eaff5..0000000
--- a/tools/perf/scripts/perl/workqueue-stats.pl
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/usr/bin/perl -w
-# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
-# Licensed under the terms of the GNU GPL License version 2
-
-# Displays workqueue stats
-#
-# Usage:
-#
-# perf record -c 1 -f -a -R -e workqueue:workqueue_creation -e
-# workqueue:workqueue_destruction -e workqueue:workqueue_execution
-# -e workqueue:workqueue_insertion
-#
-# perf script -p -s tools/perf/scripts/perl/workqueue-stats.pl
-
-use 5.010000;
-use strict;
-use warnings;
-
-use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
-use lib "./Perf-Trace-Util/lib";
-use Perf::Trace::Core;
-use Perf::Trace::Util;
-
-my @cpus;
-
-sub workqueue::workqueue_destruction
-{
- my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
- $common_pid, $common_comm,
- $thread_comm, $thread_pid) = @_;
-
- $cpus[$common_cpu]{$thread_pid}{destroyed}++;
- $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
-}
-
-sub workqueue::workqueue_creation
-{
- my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
- $common_pid, $common_comm,
- $thread_comm, $thread_pid, $cpu) = @_;
-
- $cpus[$common_cpu]{$thread_pid}{created}++;
- $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
-}
-
-sub workqueue::workqueue_execution
-{
- my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
- $common_pid, $common_comm,
- $thread_comm, $thread_pid, $func) = @_;
-
- $cpus[$common_cpu]{$thread_pid}{executed}++;
- $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
-}
-
-sub workqueue::workqueue_insertion
-{
- my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
- $common_pid, $common_comm,
- $thread_comm, $thread_pid, $func) = @_;
-
- $cpus[$common_cpu]{$thread_pid}{inserted}++;
- $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
-}
-
-sub trace_end
-{
- print "workqueue work stats:\n\n";
- my $cpu = 0;
- printf("%3s %6s %6s\t%-20s\n", "cpu", "ins", "exec", "name");
- printf("%3s %6s %6s\t%-20s\n", "---", "---", "----", "----");
- foreach my $pidhash (@cpus) {
- while ((my $pid, my $wqhash) = each %$pidhash) {
- my $ins = $$wqhash{'inserted'} || 0;
- my $exe = $$wqhash{'executed'} || 0;
- my $comm = $$wqhash{'comm'} || "";
- if ($ins || $exe) {
- printf("%3u %6u %6u\t%-20s\n", $cpu, $ins, $exe, $comm);
- }
- }
- $cpu++;
- }
-
- $cpu = 0;
- print "\nworkqueue lifecycle stats:\n\n";
- printf("%3s %6s %6s\t%-20s\n", "cpu", "created", "destroyed", "name");
- printf("%3s %6s %6s\t%-20s\n", "---", "-------", "---------", "----");
- foreach my $pidhash (@cpus) {
- while ((my $pid, my $wqhash) = each %$pidhash) {
- my $created = $$wqhash{'created'} || 0;
- my $destroyed = $$wqhash{'destroyed'} || 0;
- my $comm = $$wqhash{'comm'} || "";
- if ($created || $destroyed) {
- printf("%3u %6u %6u\t%-20s\n", $cpu, $created, $destroyed,
- $comm);
- }
- }
- $cpu++;
- }
-
- print_unhandled();
-}
-
-my %unhandled;
-
-sub print_unhandled
-{
- if ((scalar keys %unhandled) == 0) {
- return;
- }
-
- print "\nunhandled events:\n\n";
-
- printf("%-40s %10s\n", "event", "count");
- printf("%-40s %10s\n", "----------------------------------------",
- "-----------");
-
- foreach my $event_name (keys %unhandled) {
- printf("%-40s %10d\n", $event_name, $unhandled{$event_name});
- }
-}
-
-sub trace_unhandled
-{
- my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
- $common_pid, $common_comm) = @_;
-
- $unhandled{$event_name}++;
-}
diff --git a/tools/perf/tests/attr.c b/tools/perf/tests/attr.c
index 25638a9..bdcceb8 100644
--- a/tools/perf/tests/attr.c
+++ b/tools/perf/tests/attr.c
@@ -19,6 +19,11 @@
* permissions. All the event text files are stored there.
*/
+/*
+ * Powerpc needs __SANE_USERSPACE_TYPES__ before <linux/types.h> to select
+ * 'int-ll64.h' and avoid compile warnings when printing __u64 with %llu.
+ */
+#define __SANE_USERSPACE_TYPES__
#include <stdlib.h>
#include <stdio.h>
#include <inttypes.h>
@@ -33,8 +38,6 @@
extern int verbose;
-bool test_attr__enabled;
-
static char *dir;
void test_attr__init(void)
@@ -146,7 +149,7 @@
{
char cmd[3*PATH_MAX];
- snprintf(cmd, 3*PATH_MAX, "python %s/attr.py -d %s/attr/ -p %s %s",
+ snprintf(cmd, 3*PATH_MAX, PYTHON " %s/attr.py -d %s/attr/ -p %s %s",
d, d, perf, verbose ? "-v" : "");
return system(cmd);
diff --git a/tools/perf/tests/attr.py b/tools/perf/tests/attr.py
index e702b82..2f629ca 100644
--- a/tools/perf/tests/attr.py
+++ b/tools/perf/tests/attr.py
@@ -68,7 +68,7 @@
self[key] = val
def __init__(self, name, data, base):
- log.info(" Event %s" % name);
+ log.debug(" Event %s" % name);
self.name = name;
self.group = ''
self.add(base)
@@ -97,6 +97,14 @@
return False
return True
+ def diff(self, other):
+ for t in Event.terms:
+ if not self.has_key(t) or not other.has_key(t):
+ continue
+ if not self.compare_data(self[t], other[t]):
+ log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
+
+
# Test file description needs to have following sections:
# [config]
# - just single instance in file
@@ -113,7 +121,7 @@
parser = ConfigParser.SafeConfigParser()
parser.read(path)
- log.warning("running '%s'" % path)
+ log.debug("running '%s'" % path)
self.path = path
self.test_dir = options.test_dir
@@ -128,7 +136,7 @@
self.expect = {}
self.result = {}
- log.info(" loading expected events");
+ log.debug(" loading expected events");
self.load_events(path, self.expect)
def is_event(self, name):
@@ -164,7 +172,7 @@
self.perf, self.command, tempdir, self.args)
ret = os.WEXITSTATUS(os.system(cmd))
- log.info(" running '%s' ret %d " % (cmd, ret))
+ log.warning(" running '%s' ret %d " % (cmd, ret))
if ret != int(self.ret):
raise Unsup(self)
@@ -172,7 +180,7 @@
def compare(self, expect, result):
match = {}
- log.info(" compare");
+ log.debug(" compare");
# For each expected event find all matching
# events in result. Fail if there's not any.
@@ -187,10 +195,11 @@
else:
log.debug(" ->FAIL");
- log.info(" match: [%s] matches %s" % (exp_name, str(exp_list)))
+ log.debug(" match: [%s] matches %s" % (exp_name, str(exp_list)))
# we did not any matching event - fail
if (not exp_list):
+ exp_event.diff(res_event)
raise Fail(self, 'match failure');
match[exp_name] = exp_list
@@ -208,10 +217,10 @@
if res_group not in match[group]:
raise Fail(self, 'group failure')
- log.info(" group: [%s] matches group leader %s" %
+ log.debug(" group: [%s] matches group leader %s" %
(exp_name, str(match[group])))
- log.info(" matched")
+ log.debug(" matched")
def resolve_groups(self, events):
for name, event in events.items():
@@ -233,7 +242,7 @@
self.run_cmd(tempdir);
# load events expectation for the test
- log.info(" loading result events");
+ log.debug(" loading result events");
for f in glob.glob(tempdir + '/event*'):
self.load_events(f, self.result);
diff --git a/tools/perf/tests/attr/base-record b/tools/perf/tests/attr/base-record
index f1485d8..5bc3880 100644
--- a/tools/perf/tests/attr/base-record
+++ b/tools/perf/tests/attr/base-record
@@ -7,7 +7,7 @@
config=0
sample_period=4000
sample_type=263
-read_format=7
+read_format=0
disabled=1
inherit=1
pinned=0
diff --git a/tools/perf/tests/attr/test-record-group b/tools/perf/tests/attr/test-record-group
index a6599e9..57739ca 100644
--- a/tools/perf/tests/attr/test-record-group
+++ b/tools/perf/tests/attr/test-record-group
@@ -6,12 +6,14 @@
fd=1
group_fd=-1
sample_type=327
+read_format=4
[event-2:base-record]
fd=2
group_fd=1
config=1
sample_type=327
+read_format=4
mmap=0
comm=0
enable_on_exec=0
diff --git a/tools/perf/tests/attr/test-record-group1 b/tools/perf/tests/attr/test-record-group1
index 5a8359d..c5548d0 100644
--- a/tools/perf/tests/attr/test-record-group1
+++ b/tools/perf/tests/attr/test-record-group1
@@ -1,11 +1,12 @@
[config]
command = record
-args = -e '{cycles,instructions}' kill >/tmp/krava 2>&1
+args = -e '{cycles,instructions}' kill >/dev/null 2>&1
[event-1:base-record]
fd=1
group_fd=-1
sample_type=327
+read_format=4
[event-2:base-record]
fd=2
@@ -13,6 +14,7 @@
type=0
config=1
sample_type=327
+read_format=4
mmap=0
comm=0
enable_on_exec=0
diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
index 186f675..acb98e0 100644
--- a/tools/perf/tests/builtin-test.c
+++ b/tools/perf/tests/builtin-test.c
@@ -4,6 +4,7 @@
* Builtin regression testing command: ever growing number of sanity tests
*/
#include "builtin.h"
+#include "intlist.h"
#include "tests.h"
#include "debug.h"
#include "color.h"
@@ -69,6 +70,14 @@
.func = test__attr,
},
{
+ .desc = "Test matching and linking mutliple hists",
+ .func = test__hists_link,
+ },
+ {
+ .desc = "Try 'use perf' in python, checking link problems",
+ .func = test__python_use,
+ },
+ {
.func = NULL,
},
};
@@ -97,7 +106,7 @@
return false;
}
-static int __cmd_test(int argc, const char *argv[])
+static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
{
int i = 0;
int width = 0;
@@ -118,13 +127,28 @@
continue;
pr_info("%2d: %-*s:", i, width, tests[curr].desc);
+
+ if (intlist__find(skiplist, i)) {
+ color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip (user override)\n");
+ continue;
+ }
+
pr_debug("\n--- start ---\n");
err = tests[curr].func();
pr_debug("---- end ----\n%s:", tests[curr].desc);
- if (err)
- color_fprintf(stderr, PERF_COLOR_RED, " FAILED!\n");
- else
+
+ switch (err) {
+ case TEST_OK:
pr_info(" Ok\n");
+ break;
+ case TEST_SKIP:
+ color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip\n");
+ break;
+ case TEST_FAIL:
+ default:
+ color_fprintf(stderr, PERF_COLOR_RED, " FAILED!\n");
+ break;
+ }
}
return 0;
@@ -152,11 +176,14 @@
"perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]",
NULL,
};
+ const char *skip = NULL;
const struct option test_options[] = {
+ OPT_STRING('s', "skip", &skip, "tests", "tests to skip"),
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
OPT_END()
};
+ struct intlist *skiplist = NULL;
argc = parse_options(argc, argv, test_options, test_usage, 0);
if (argc >= 1 && !strcmp(argv[0], "list"))
@@ -169,5 +196,8 @@
if (symbol__init() < 0)
return -1;
- return __cmd_test(argc, argv);
+ if (skip != NULL)
+ skiplist = intlist__new(skip);
+
+ return __cmd_test(argc, argv, skiplist);
}
diff --git a/tools/perf/tests/evsel-roundtrip-name.c b/tools/perf/tests/evsel-roundtrip-name.c
index e61fc82..0fd99a9 100644
--- a/tools/perf/tests/evsel-roundtrip-name.c
+++ b/tools/perf/tests/evsel-roundtrip-name.c
@@ -22,7 +22,7 @@
for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
__perf_evsel__hw_cache_type_op_res_name(type, op, i,
name, sizeof(name));
- err = parse_events(evlist, name, 0);
+ err = parse_events(evlist, name);
if (err)
ret = err;
}
@@ -70,7 +70,7 @@
return -ENOMEM;
for (i = 0; i < nr_names; ++i) {
- err = parse_events(evlist, names[i], 0);
+ err = parse_events(evlist, names[i]);
if (err) {
pr_debug("failed to parse event '%s', err %d\n",
names[i], err);
diff --git a/tools/perf/tests/hists_link.c b/tools/perf/tests/hists_link.c
new file mode 100644
index 0000000..1be64a6
--- /dev/null
+++ b/tools/perf/tests/hists_link.c
@@ -0,0 +1,500 @@
+#include "perf.h"
+#include "tests.h"
+#include "debug.h"
+#include "symbol.h"
+#include "sort.h"
+#include "evsel.h"
+#include "evlist.h"
+#include "machine.h"
+#include "thread.h"
+#include "parse-events.h"
+
+static struct {
+ u32 pid;
+ const char *comm;
+} fake_threads[] = {
+ { 100, "perf" },
+ { 200, "perf" },
+ { 300, "bash" },
+};
+
+static struct {
+ u32 pid;
+ u64 start;
+ const char *filename;
+} fake_mmap_info[] = {
+ { 100, 0x40000, "perf" },
+ { 100, 0x50000, "libc" },
+ { 100, 0xf0000, "[kernel]" },
+ { 200, 0x40000, "perf" },
+ { 200, 0x50000, "libc" },
+ { 200, 0xf0000, "[kernel]" },
+ { 300, 0x40000, "bash" },
+ { 300, 0x50000, "libc" },
+ { 300, 0xf0000, "[kernel]" },
+};
+
+struct fake_sym {
+ u64 start;
+ u64 length;
+ const char *name;
+};
+
+static struct fake_sym perf_syms[] = {
+ { 700, 100, "main" },
+ { 800, 100, "run_command" },
+ { 900, 100, "cmd_record" },
+};
+
+static struct fake_sym bash_syms[] = {
+ { 700, 100, "main" },
+ { 800, 100, "xmalloc" },
+ { 900, 100, "xfree" },
+};
+
+static struct fake_sym libc_syms[] = {
+ { 700, 100, "malloc" },
+ { 800, 100, "free" },
+ { 900, 100, "realloc" },
+};
+
+static struct fake_sym kernel_syms[] = {
+ { 700, 100, "schedule" },
+ { 800, 100, "page_fault" },
+ { 900, 100, "sys_perf_event_open" },
+};
+
+static struct {
+ const char *dso_name;
+ struct fake_sym *syms;
+ size_t nr_syms;
+} fake_symbols[] = {
+ { "perf", perf_syms, ARRAY_SIZE(perf_syms) },
+ { "bash", bash_syms, ARRAY_SIZE(bash_syms) },
+ { "libc", libc_syms, ARRAY_SIZE(libc_syms) },
+ { "[kernel]", kernel_syms, ARRAY_SIZE(kernel_syms) },
+};
+
+static struct machine *setup_fake_machine(struct machines *machines)
+{
+ struct machine *machine = machines__find(machines, HOST_KERNEL_ID);
+ size_t i;
+
+ if (machine == NULL) {
+ pr_debug("Not enough memory for machine setup\n");
+ return NULL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(fake_threads); i++) {
+ struct thread *thread;
+
+ thread = machine__findnew_thread(machine, fake_threads[i].pid);
+ if (thread == NULL)
+ goto out;
+
+ thread__set_comm(thread, fake_threads[i].comm);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(fake_mmap_info); i++) {
+ union perf_event fake_mmap_event = {
+ .mmap = {
+ .header = { .misc = PERF_RECORD_MISC_USER, },
+ .pid = fake_mmap_info[i].pid,
+ .start = fake_mmap_info[i].start,
+ .len = 0x1000ULL,
+ .pgoff = 0ULL,
+ },
+ };
+
+ strcpy(fake_mmap_event.mmap.filename,
+ fake_mmap_info[i].filename);
+
+ machine__process_mmap_event(machine, &fake_mmap_event);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(fake_symbols); i++) {
+ size_t k;
+ struct dso *dso;
+
+ dso = __dsos__findnew(&machine->user_dsos,
+ fake_symbols[i].dso_name);
+ if (dso == NULL)
+ goto out;
+
+ /* emulate dso__load() */
+ dso__set_loaded(dso, MAP__FUNCTION);
+
+ for (k = 0; k < fake_symbols[i].nr_syms; k++) {
+ struct symbol *sym;
+ struct fake_sym *fsym = &fake_symbols[i].syms[k];
+
+ sym = symbol__new(fsym->start, fsym->length,
+ STB_GLOBAL, fsym->name);
+ if (sym == NULL)
+ goto out;
+
+ symbols__insert(&dso->symbols[MAP__FUNCTION], sym);
+ }
+ }
+
+ return machine;
+
+out:
+ pr_debug("Not enough memory for machine setup\n");
+ machine__delete_threads(machine);
+ machine__delete(machine);
+ return NULL;
+}
+
+struct sample {
+ u32 pid;
+ u64 ip;
+ struct thread *thread;
+ struct map *map;
+ struct symbol *sym;
+};
+
+static struct sample fake_common_samples[] = {
+ /* perf [kernel] schedule() */
+ { .pid = 100, .ip = 0xf0000 + 700, },
+ /* perf [perf] main() */
+ { .pid = 200, .ip = 0x40000 + 700, },
+ /* perf [perf] cmd_record() */
+ { .pid = 200, .ip = 0x40000 + 900, },
+ /* bash [bash] xmalloc() */
+ { .pid = 300, .ip = 0x40000 + 800, },
+ /* bash [libc] malloc() */
+ { .pid = 300, .ip = 0x50000 + 700, },
+};
+
+static struct sample fake_samples[][5] = {
+ {
+ /* perf [perf] run_command() */
+ { .pid = 100, .ip = 0x40000 + 800, },
+ /* perf [libc] malloc() */
+ { .pid = 100, .ip = 0x50000 + 700, },
+ /* perf [kernel] page_fault() */
+ { .pid = 100, .ip = 0xf0000 + 800, },
+ /* perf [kernel] sys_perf_event_open() */
+ { .pid = 200, .ip = 0xf0000 + 900, },
+ /* bash [libc] free() */
+ { .pid = 300, .ip = 0x50000 + 800, },
+ },
+ {
+ /* perf [libc] free() */
+ { .pid = 200, .ip = 0x50000 + 800, },
+ /* bash [libc] malloc() */
+ { .pid = 300, .ip = 0x50000 + 700, }, /* will be merged */
+ /* bash [bash] xfee() */
+ { .pid = 300, .ip = 0x40000 + 900, },
+ /* bash [libc] realloc() */
+ { .pid = 300, .ip = 0x50000 + 900, },
+ /* bash [kernel] page_fault() */
+ { .pid = 300, .ip = 0xf0000 + 800, },
+ },
+};
+
+static int add_hist_entries(struct perf_evlist *evlist, struct machine *machine)
+{
+ struct perf_evsel *evsel;
+ struct addr_location al;
+ struct hist_entry *he;
+ struct perf_sample sample = { .cpu = 0, };
+ size_t i = 0, k;
+
+ /*
+ * each evsel will have 10 samples - 5 common and 5 distinct.
+ * However the second evsel also has a collapsed entry for
+ * "bash [libc] malloc" so total 9 entries will be in the tree.
+ */
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ for (k = 0; k < ARRAY_SIZE(fake_common_samples); k++) {
+ const union perf_event event = {
+ .ip = {
+ .header = {
+ .misc = PERF_RECORD_MISC_USER,
+ },
+ .pid = fake_common_samples[k].pid,
+ .ip = fake_common_samples[k].ip,
+ },
+ };
+
+ if (perf_event__preprocess_sample(&event, machine, &al,
+ &sample, 0) < 0)
+ goto out;
+
+ he = __hists__add_entry(&evsel->hists, &al, NULL, 1);
+ if (he == NULL)
+ goto out;
+
+ fake_common_samples[k].thread = al.thread;
+ fake_common_samples[k].map = al.map;
+ fake_common_samples[k].sym = al.sym;
+ }
+
+ for (k = 0; k < ARRAY_SIZE(fake_samples[i]); k++) {
+ const union perf_event event = {
+ .ip = {
+ .header = {
+ .misc = PERF_RECORD_MISC_USER,
+ },
+ .pid = fake_samples[i][k].pid,
+ .ip = fake_samples[i][k].ip,
+ },
+ };
+
+ if (perf_event__preprocess_sample(&event, machine, &al,
+ &sample, 0) < 0)
+ goto out;
+
+ he = __hists__add_entry(&evsel->hists, &al, NULL, 1);
+ if (he == NULL)
+ goto out;
+
+ fake_samples[i][k].thread = al.thread;
+ fake_samples[i][k].map = al.map;
+ fake_samples[i][k].sym = al.sym;
+ }
+ i++;
+ }
+
+ return 0;
+
+out:
+ pr_debug("Not enough memory for adding a hist entry\n");
+ return -1;
+}
+
+static int find_sample(struct sample *samples, size_t nr_samples,
+ struct thread *t, struct map *m, struct symbol *s)
+{
+ while (nr_samples--) {
+ if (samples->thread == t && samples->map == m &&
+ samples->sym == s)
+ return 1;
+ samples++;
+ }
+ return 0;
+}
+
+static int __validate_match(struct hists *hists)
+{
+ size_t count = 0;
+ struct rb_root *root;
+ struct rb_node *node;
+
+ /*
+ * Only entries from fake_common_samples should have a pair.
+ */
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ node = rb_first(root);
+ while (node) {
+ struct hist_entry *he;
+
+ he = rb_entry(node, struct hist_entry, rb_node_in);
+
+ if (hist_entry__has_pairs(he)) {
+ if (find_sample(fake_common_samples,
+ ARRAY_SIZE(fake_common_samples),
+ he->thread, he->ms.map, he->ms.sym)) {
+ count++;
+ } else {
+ pr_debug("Can't find the matched entry\n");
+ return -1;
+ }
+ }
+
+ node = rb_next(node);
+ }
+
+ if (count != ARRAY_SIZE(fake_common_samples)) {
+ pr_debug("Invalid count for matched entries: %zd of %zd\n",
+ count, ARRAY_SIZE(fake_common_samples));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int validate_match(struct hists *leader, struct hists *other)
+{
+ return __validate_match(leader) || __validate_match(other);
+}
+
+static int __validate_link(struct hists *hists, int idx)
+{
+ size_t count = 0;
+ size_t count_pair = 0;
+ size_t count_dummy = 0;
+ struct rb_root *root;
+ struct rb_node *node;
+
+ /*
+ * Leader hists (idx = 0) will have dummy entries from other,
+ * and some entries will have no pair. However every entry
+ * in other hists should have (dummy) pair.
+ */
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ node = rb_first(root);
+ while (node) {
+ struct hist_entry *he;
+
+ he = rb_entry(node, struct hist_entry, rb_node_in);
+
+ if (hist_entry__has_pairs(he)) {
+ if (!find_sample(fake_common_samples,
+ ARRAY_SIZE(fake_common_samples),
+ he->thread, he->ms.map, he->ms.sym) &&
+ !find_sample(fake_samples[idx],
+ ARRAY_SIZE(fake_samples[idx]),
+ he->thread, he->ms.map, he->ms.sym)) {
+ count_dummy++;
+ }
+ count_pair++;
+ } else if (idx) {
+ pr_debug("A entry from the other hists should have pair\n");
+ return -1;
+ }
+
+ count++;
+ node = rb_next(node);
+ }
+
+ /*
+ * Note that we have a entry collapsed in the other (idx = 1) hists.
+ */
+ if (idx == 0) {
+ if (count_dummy != ARRAY_SIZE(fake_samples[1]) - 1) {
+ pr_debug("Invalid count of dummy entries: %zd of %zd\n",
+ count_dummy, ARRAY_SIZE(fake_samples[1]) - 1);
+ return -1;
+ }
+ if (count != count_pair + ARRAY_SIZE(fake_samples[0])) {
+ pr_debug("Invalid count of total leader entries: %zd of %zd\n",
+ count, count_pair + ARRAY_SIZE(fake_samples[0]));
+ return -1;
+ }
+ } else {
+ if (count != count_pair) {
+ pr_debug("Invalid count of total other entries: %zd of %zd\n",
+ count, count_pair);
+ return -1;
+ }
+ if (count_dummy > 0) {
+ pr_debug("Other hists should not have dummy entries: %zd\n",
+ count_dummy);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int validate_link(struct hists *leader, struct hists *other)
+{
+ return __validate_link(leader, 0) || __validate_link(other, 1);
+}
+
+static void print_hists(struct hists *hists)
+{
+ int i = 0;
+ struct rb_root *root;
+ struct rb_node *node;
+
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ pr_info("----- %s --------\n", __func__);
+ node = rb_first(root);
+ while (node) {
+ struct hist_entry *he;
+
+ he = rb_entry(node, struct hist_entry, rb_node_in);
+
+ pr_info("%2d: entry: %-8s [%-8s] %20s: period = %"PRIu64"\n",
+ i, he->thread->comm, he->ms.map->dso->short_name,
+ he->ms.sym->name, he->stat.period);
+
+ i++;
+ node = rb_next(node);
+ }
+}
+
+int test__hists_link(void)
+{
+ int err = -1;
+ struct machines machines;
+ struct machine *machine = NULL;
+ struct perf_evsel *evsel, *first;
+ struct perf_evlist *evlist = perf_evlist__new(NULL, NULL);
+
+ if (evlist == NULL)
+ return -ENOMEM;
+
+ err = parse_events(evlist, "cpu-clock");
+ if (err)
+ goto out;
+ err = parse_events(evlist, "task-clock");
+ if (err)
+ goto out;
+
+ /* default sort order (comm,dso,sym) will be used */
+ if (setup_sorting() < 0)
+ goto out;
+
+ machines__init(&machines);
+
+ /* setup threads/dso/map/symbols also */
+ machine = setup_fake_machine(&machines);
+ if (!machine)
+ goto out;
+
+ if (verbose > 1)
+ machine__fprintf(machine, stderr);
+
+ /* process sample events */
+ err = add_hist_entries(evlist, machine);
+ if (err < 0)
+ goto out;
+
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ hists__collapse_resort(&evsel->hists);
+
+ if (verbose > 2)
+ print_hists(&evsel->hists);
+ }
+
+ first = perf_evlist__first(evlist);
+ evsel = perf_evlist__last(evlist);
+
+ /* match common entries */
+ hists__match(&first->hists, &evsel->hists);
+ err = validate_match(&first->hists, &evsel->hists);
+ if (err)
+ goto out;
+
+ /* link common and/or dummy entries */
+ hists__link(&first->hists, &evsel->hists);
+ err = validate_link(&first->hists, &evsel->hists);
+ if (err)
+ goto out;
+
+ err = 0;
+
+out:
+ /* tear down everything */
+ perf_evlist__delete(evlist);
+ machines__exit(&machines);
+
+ return err;
+}
diff --git a/tools/perf/tests/mmap-basic.c b/tools/perf/tests/mmap-basic.c
index e174681..cdd5075 100644
--- a/tools/perf/tests/mmap-basic.c
+++ b/tools/perf/tests/mmap-basic.c
@@ -22,36 +22,16 @@
struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evlist *evlist;
- struct perf_event_attr attr = {
- .type = PERF_TYPE_TRACEPOINT,
- .read_format = PERF_FORMAT_ID,
- .sample_type = PERF_SAMPLE_ID,
- .watermark = 0,
- };
cpu_set_t cpu_set;
const char *syscall_names[] = { "getsid", "getppid", "getpgrp",
"getpgid", };
pid_t (*syscalls[])(void) = { (void *)getsid, getppid, getpgrp,
(void*)getpgid };
#define nsyscalls ARRAY_SIZE(syscall_names)
- int ids[nsyscalls];
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
- for (i = 0; i < nsyscalls; ++i) {
- char name[64];
-
- snprintf(name, sizeof(name), "sys_enter_%s", syscall_names[i]);
- ids[i] = trace_event__id(name);
- if (ids[i] < 0) {
- pr_debug("Is debugfs mounted on /sys/kernel/debug?\n");
- return -1;
- }
- nr_events[i] = 0;
- expected_nr_events[i] = random() % 257;
- }
-
threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
@@ -79,18 +59,19 @@
goto out_free_cpus;
}
- /* anonymous union fields, can't be initialized above */
- attr.wakeup_events = 1;
- attr.sample_period = 1;
-
for (i = 0; i < nsyscalls; ++i) {
- attr.config = ids[i];
- evsels[i] = perf_evsel__new(&attr, i);
+ char name[64];
+
+ snprintf(name, sizeof(name), "sys_enter_%s", syscall_names[i]);
+ evsels[i] = perf_evsel__newtp("syscalls", name, i);
if (evsels[i] == NULL) {
pr_debug("perf_evsel__new\n");
goto out_free_evlist;
}
+ evsels[i]->attr.wakeup_events = 1;
+ perf_evsel__set_sample_id(evsels[i]);
+
perf_evlist__add(evlist, evsels[i]);
if (perf_evsel__open(evsels[i], cpus, threads) < 0) {
@@ -99,6 +80,9 @@
strerror(errno));
goto out_close_fd;
}
+
+ nr_events[i] = 0;
+ expected_nr_events[i] = 1 + rand() % 127;
}
if (perf_evlist__mmap(evlist, 128, true) < 0) {
@@ -128,6 +112,7 @@
goto out_munmap;
}
+ err = -1;
evsel = perf_evlist__id2evsel(evlist, sample.id);
if (evsel == NULL) {
pr_debug("event with id %" PRIu64
@@ -137,16 +122,17 @@
nr_events[evsel->idx]++;
}
+ err = 0;
list_for_each_entry(evsel, &evlist->entries, node) {
if (nr_events[evsel->idx] != expected_nr_events[evsel->idx]) {
pr_debug("expected %d %s events, got %d\n",
expected_nr_events[evsel->idx],
perf_evsel__name(evsel), nr_events[evsel->idx]);
+ err = -1;
goto out_munmap;
}
}
- err = 0;
out_munmap:
perf_evlist__munmap(evlist);
out_close_fd:
diff --git a/tools/perf/tests/open-syscall-all-cpus.c b/tools/perf/tests/open-syscall-all-cpus.c
index 31072ab..b0657a9 100644
--- a/tools/perf/tests/open-syscall-all-cpus.c
+++ b/tools/perf/tests/open-syscall-all-cpus.c
@@ -7,20 +7,12 @@
int test__open_syscall_event_on_all_cpus(void)
{
int err = -1, fd, cpu;
- struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evsel *evsel;
- struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
cpu_set_t cpu_set;
- int id = trace_event__id("sys_enter_open");
+ struct thread_map *threads = thread_map__new(-1, getpid(), UINT_MAX);
- if (id < 0) {
- pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
- return -1;
- }
-
- threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
@@ -32,15 +24,11 @@
goto out_thread_map_delete;
}
-
CPU_ZERO(&cpu_set);
- memset(&attr, 0, sizeof(attr));
- attr.type = PERF_TYPE_TRACEPOINT;
- attr.config = id;
- evsel = perf_evsel__new(&attr, 0);
+ evsel = perf_evsel__newtp("syscalls", "sys_enter_open", 0);
if (evsel == NULL) {
- pr_debug("perf_evsel__new\n");
+ pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
goto out_thread_map_delete;
}
@@ -110,6 +98,7 @@
}
}
+ perf_evsel__free_counts(evsel);
out_close_fd:
perf_evsel__close_fd(evsel, 1, threads->nr);
out_evsel_delete:
diff --git a/tools/perf/tests/open-syscall.c b/tools/perf/tests/open-syscall.c
index 98be8b5..befc067 100644
--- a/tools/perf/tests/open-syscall.c
+++ b/tools/perf/tests/open-syscall.c
@@ -6,29 +6,18 @@
int test__open_syscall_event(void)
{
int err = -1, fd;
- struct thread_map *threads;
struct perf_evsel *evsel;
- struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
- int id = trace_event__id("sys_enter_open");
+ struct thread_map *threads = thread_map__new(-1, getpid(), UINT_MAX);
- if (id < 0) {
- pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
- return -1;
- }
-
- threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
- memset(&attr, 0, sizeof(attr));
- attr.type = PERF_TYPE_TRACEPOINT;
- attr.config = id;
- evsel = perf_evsel__new(&attr, 0);
+ evsel = perf_evsel__newtp("syscalls", "sys_enter_open", 0);
if (evsel == NULL) {
- pr_debug("perf_evsel__new\n");
+ pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
goto out_thread_map_delete;
}
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 32ee478..c5636f3 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -3,6 +3,7 @@
#include "evsel.h"
#include "evlist.h"
#include "sysfs.h"
+#include "debugfs.h"
#include "tests.h"
#include <linux/hw_breakpoint.h>
@@ -22,6 +23,7 @@
struct perf_evsel *evsel = perf_evlist__first(evlist);
TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 0 == evlist->nr_groups);
TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type);
TEST_ASSERT_VAL("wrong sample_type",
PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type);
@@ -34,6 +36,7 @@
struct perf_evsel *evsel;
TEST_ASSERT_VAL("wrong number of entries", evlist->nr_entries > 1);
+ TEST_ASSERT_VAL("wrong number of groups", 0 == evlist->nr_groups);
list_for_each_entry(evsel, &evlist->entries, node) {
TEST_ASSERT_VAL("wrong type",
@@ -463,10 +466,10 @@
static int test__checkterms_simple(struct list_head *terms)
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
/* config=10 */
- term = list_entry(terms->next, struct parse_events__term, list);
+ term = list_entry(terms->next, struct parse_events_term, list);
TEST_ASSERT_VAL("wrong type term",
term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG);
TEST_ASSERT_VAL("wrong type val",
@@ -475,7 +478,7 @@
TEST_ASSERT_VAL("wrong config", !term->config);
/* config1 */
- term = list_entry(term->list.next, struct parse_events__term, list);
+ term = list_entry(term->list.next, struct parse_events_term, list);
TEST_ASSERT_VAL("wrong type term",
term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG1);
TEST_ASSERT_VAL("wrong type val",
@@ -484,7 +487,7 @@
TEST_ASSERT_VAL("wrong config", !term->config);
/* config2=3 */
- term = list_entry(term->list.next, struct parse_events__term, list);
+ term = list_entry(term->list.next, struct parse_events_term, list);
TEST_ASSERT_VAL("wrong type term",
term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG2);
TEST_ASSERT_VAL("wrong type val",
@@ -493,7 +496,7 @@
TEST_ASSERT_VAL("wrong config", !term->config);
/* umask=1*/
- term = list_entry(term->list.next, struct parse_events__term, list);
+ term = list_entry(term->list.next, struct parse_events_term, list);
TEST_ASSERT_VAL("wrong type term",
term->type_term == PARSE_EVENTS__TERM_TYPE_USER);
TEST_ASSERT_VAL("wrong type val",
@@ -509,6 +512,7 @@
struct perf_evsel *evsel, *leader;
TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
/* instructions:k */
evsel = leader = perf_evlist__first(evlist);
@@ -521,7 +525,9 @@
TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* cycles:upp */
evsel = perf_evsel__next(evsel);
@@ -536,6 +542,7 @@
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
return 0;
}
@@ -545,6 +552,7 @@
struct perf_evsel *evsel, *leader;
TEST_ASSERT_VAL("wrong number of entries", 3 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
/* faults + :ku modifier */
evsel = leader = perf_evlist__first(evlist);
@@ -557,7 +565,9 @@
TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* cache-references + :u modifier */
evsel = perf_evsel__next(evsel);
@@ -567,10 +577,11 @@
TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
/* cycles:k */
evsel = perf_evsel__next(evsel);
@@ -583,7 +594,7 @@
TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
return 0;
}
@@ -593,6 +604,7 @@
struct perf_evsel *evsel, *leader;
TEST_ASSERT_VAL("wrong number of entries", 5 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 2 == evlist->nr_groups);
/* group1 syscalls:sys_enter_open:H */
evsel = leader = perf_evlist__first(evlist);
@@ -606,9 +618,11 @@
TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
TEST_ASSERT_VAL("wrong group name",
!strcmp(leader->group_name, "group1"));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* group1 cycles:kppp */
evsel = perf_evsel__next(evsel);
@@ -624,6 +638,7 @@
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 3);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
/* group2 cycles + G modifier */
evsel = leader = perf_evsel__next(evsel);
@@ -636,9 +651,11 @@
TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
TEST_ASSERT_VAL("wrong group name",
!strcmp(leader->group_name, "group2"));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* group2 1:3 + G modifier */
evsel = perf_evsel__next(evsel);
@@ -651,6 +668,7 @@
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
/* instructions:u */
evsel = perf_evsel__next(evsel);
@@ -663,7 +681,7 @@
TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
return 0;
}
@@ -673,6 +691,7 @@
struct perf_evsel *evsel, *leader;
TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
/* cycles:u + p */
evsel = leader = perf_evlist__first(evlist);
@@ -687,7 +706,9 @@
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 1);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* instructions:kp + p */
evsel = perf_evsel__next(evsel);
@@ -702,6 +723,7 @@
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
return 0;
}
@@ -711,6 +733,7 @@
struct perf_evsel *evsel, *leader;
TEST_ASSERT_VAL("wrong number of entries", 5 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 2 == evlist->nr_groups);
/* cycles + G */
evsel = leader = perf_evlist__first(evlist);
@@ -724,7 +747,9 @@
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* instructions + G */
evsel = perf_evsel__next(evsel);
@@ -738,6 +763,7 @@
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
/* cycles:G */
evsel = leader = perf_evsel__next(evsel);
@@ -751,7 +777,9 @@
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
/* instructions:G */
evsel = perf_evsel__next(evsel);
@@ -765,6 +793,7 @@
TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
/* cycles */
evsel = perf_evsel__next(evsel);
@@ -777,18 +806,235 @@
TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
- TEST_ASSERT_VAL("wrong leader", !perf_evsel__is_group_member(evsel));
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
return 0;
}
-struct test__event_st {
+static int test__group_gh1(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel, *leader;
+
+ TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
+
+ /* cycles + :H group modifier */
+ evsel = leader = perf_evlist__first(evlist);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CPU_CYCLES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", !evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
+
+ /* cache-misses:G + :H group modifier */
+ evsel = perf_evsel__next(evsel);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CACHE_MISSES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", !evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
+
+ return 0;
+}
+
+static int test__group_gh2(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel, *leader;
+
+ TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
+
+ /* cycles + :G group modifier */
+ evsel = leader = perf_evlist__first(evlist);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CPU_CYCLES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", !evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
+
+ /* cache-misses:H + :G group modifier */
+ evsel = perf_evsel__next(evsel);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CACHE_MISSES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", !evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
+
+ return 0;
+}
+
+static int test__group_gh3(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel, *leader;
+
+ TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
+
+ /* cycles:G + :u group modifier */
+ evsel = leader = perf_evlist__first(evlist);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CPU_CYCLES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
+
+ /* cache-misses:H + :u group modifier */
+ evsel = perf_evsel__next(evsel);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CACHE_MISSES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
+
+ return 0;
+}
+
+static int test__group_gh4(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel, *leader;
+
+ TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong number of groups", 1 == evlist->nr_groups);
+
+ /* cycles:G + :uG group modifier */
+ evsel = leader = perf_evlist__first(evlist);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CPU_CYCLES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
+ TEST_ASSERT_VAL("wrong leader", perf_evsel__is_group_leader(evsel));
+ TEST_ASSERT_VAL("wrong nr_members", evsel->nr_members == 2);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 0);
+
+ /* cache-misses:H + :uG group modifier */
+ evsel = perf_evsel__next(evsel);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config",
+ PERF_COUNT_HW_CACHE_MISSES == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
+ TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
+ TEST_ASSERT_VAL("wrong group_idx", perf_evsel__group_idx(evsel) == 1);
+
+ return 0;
+}
+
+static int count_tracepoints(void)
+{
+ char events_path[PATH_MAX];
+ struct dirent *events_ent;
+ DIR *events_dir;
+ int cnt = 0;
+
+ scnprintf(events_path, PATH_MAX, "%s/tracing/events",
+ debugfs_find_mountpoint());
+
+ events_dir = opendir(events_path);
+
+ TEST_ASSERT_VAL("Can't open events dir", events_dir);
+
+ while ((events_ent = readdir(events_dir))) {
+ char sys_path[PATH_MAX];
+ struct dirent *sys_ent;
+ DIR *sys_dir;
+
+ if (!strcmp(events_ent->d_name, ".")
+ || !strcmp(events_ent->d_name, "..")
+ || !strcmp(events_ent->d_name, "enable")
+ || !strcmp(events_ent->d_name, "header_event")
+ || !strcmp(events_ent->d_name, "header_page"))
+ continue;
+
+ scnprintf(sys_path, PATH_MAX, "%s/%s",
+ events_path, events_ent->d_name);
+
+ sys_dir = opendir(sys_path);
+ TEST_ASSERT_VAL("Can't open sys dir", sys_dir);
+
+ while ((sys_ent = readdir(sys_dir))) {
+ if (!strcmp(sys_ent->d_name, ".")
+ || !strcmp(sys_ent->d_name, "..")
+ || !strcmp(sys_ent->d_name, "enable")
+ || !strcmp(sys_ent->d_name, "filter"))
+ continue;
+
+ cnt++;
+ }
+
+ closedir(sys_dir);
+ }
+
+ closedir(events_dir);
+ return cnt;
+}
+
+static int test__all_tracepoints(struct perf_evlist *evlist)
+{
+ TEST_ASSERT_VAL("wrong events count",
+ count_tracepoints() == evlist->nr_entries);
+
+ return test__checkevent_tracepoint_multi(evlist);
+}
+
+struct evlist_test {
const char *name;
__u32 type;
int (*check)(struct perf_evlist *evlist);
};
-static struct test__event_st test__events[] = {
+static struct evlist_test test__events[] = {
[0] = {
.name = "syscalls:sys_enter_open",
.check = test__checkevent_tracepoint,
@@ -921,9 +1167,29 @@
.name = "{cycles,instructions}:G,{cycles:G,instructions:G},cycles",
.check = test__group5,
},
+ [33] = {
+ .name = "*:*",
+ .check = test__all_tracepoints,
+ },
+ [34] = {
+ .name = "{cycles,cache-misses:G}:H",
+ .check = test__group_gh1,
+ },
+ [35] = {
+ .name = "{cycles,cache-misses:H}:G",
+ .check = test__group_gh2,
+ },
+ [36] = {
+ .name = "{cycles:G,cache-misses:H}:u",
+ .check = test__group_gh3,
+ },
+ [37] = {
+ .name = "{cycles:G,cache-misses:H}:uG",
+ .check = test__group_gh4,
+ },
};
-static struct test__event_st test__events_pmu[] = {
+static struct evlist_test test__events_pmu[] = {
[0] = {
.name = "cpu/config=10,config1,config2=3,period=1000/u",
.check = test__checkevent_pmu,
@@ -934,20 +1200,20 @@
},
};
-struct test__term {
+struct terms_test {
const char *str;
__u32 type;
int (*check)(struct list_head *terms);
};
-static struct test__term test__terms[] = {
+static struct terms_test test__terms[] = {
[0] = {
.str = "config=10,config1,config2=3,umask=1",
.check = test__checkterms_simple,
},
};
-static int test_event(struct test__event_st *e)
+static int test_event(struct evlist_test *e)
{
struct perf_evlist *evlist;
int ret;
@@ -956,7 +1222,7 @@
if (evlist == NULL)
return -ENOMEM;
- ret = parse_events(evlist, e->name, 0);
+ ret = parse_events(evlist, e->name);
if (ret) {
pr_debug("failed to parse event '%s', err %d\n",
e->name, ret);
@@ -969,13 +1235,13 @@
return ret;
}
-static int test_events(struct test__event_st *events, unsigned cnt)
+static int test_events(struct evlist_test *events, unsigned cnt)
{
int ret1, ret2 = 0;
unsigned i;
for (i = 0; i < cnt; i++) {
- struct test__event_st *e = &events[i];
+ struct evlist_test *e = &events[i];
pr_debug("running test %d '%s'\n", i, e->name);
ret1 = test_event(e);
@@ -986,7 +1252,7 @@
return ret2;
}
-static int test_term(struct test__term *t)
+static int test_term(struct terms_test *t)
{
struct list_head *terms;
int ret;
@@ -1010,13 +1276,13 @@
return ret;
}
-static int test_terms(struct test__term *terms, unsigned cnt)
+static int test_terms(struct terms_test *terms, unsigned cnt)
{
int ret = 0;
unsigned i;
for (i = 0; i < cnt; i++) {
- struct test__term *t = &terms[i];
+ struct terms_test *t = &terms[i];
pr_debug("running test %d '%s'\n", i, t->str);
ret = test_term(t);
@@ -1067,7 +1333,7 @@
while (!ret && (ent = readdir(dir))) {
#define MAX_NAME 100
- struct test__event_st e;
+ struct evlist_test e;
char name[MAX_NAME];
if (!strcmp(ent->d_name, ".") ||
diff --git a/tools/perf/tests/perf-record.c b/tools/perf/tests/perf-record.c
index 70e0d44..1e8e512 100644
--- a/tools/perf/tests/perf-record.c
+++ b/tools/perf/tests/perf-record.c
@@ -96,22 +96,22 @@
err = perf_evlist__prepare_workload(evlist, &opts, argv);
if (err < 0) {
pr_debug("Couldn't run the workload!\n");
- goto out_delete_evlist;
+ goto out_delete_maps;
}
/*
* Config the evsels, setting attr->comm on the first one, etc.
*/
evsel = perf_evlist__first(evlist);
- evsel->attr.sample_type |= PERF_SAMPLE_CPU;
- evsel->attr.sample_type |= PERF_SAMPLE_TID;
- evsel->attr.sample_type |= PERF_SAMPLE_TIME;
- perf_evlist__config_attrs(evlist, &opts);
+ perf_evsel__set_sample_bit(evsel, CPU);
+ perf_evsel__set_sample_bit(evsel, TID);
+ perf_evsel__set_sample_bit(evsel, TIME);
+ perf_evlist__config(evlist, &opts);
err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask);
if (err < 0) {
pr_debug("sched__get_first_possible_cpu: %s\n", strerror(errno));
- goto out_delete_evlist;
+ goto out_delete_maps;
}
cpu = err;
@@ -121,7 +121,7 @@
*/
if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, &cpu_mask) < 0) {
pr_debug("sched_setaffinity: %s\n", strerror(errno));
- goto out_delete_evlist;
+ goto out_delete_maps;
}
/*
@@ -131,7 +131,7 @@
err = perf_evlist__open(evlist);
if (err < 0) {
pr_debug("perf_evlist__open: %s\n", strerror(errno));
- goto out_delete_evlist;
+ goto out_delete_maps;
}
/*
@@ -142,7 +142,7 @@
err = perf_evlist__mmap(evlist, opts.mmap_pages, false);
if (err < 0) {
pr_debug("perf_evlist__mmap: %s\n", strerror(errno));
- goto out_delete_evlist;
+ goto out_delete_maps;
}
/*
@@ -305,6 +305,8 @@
}
out_err:
perf_evlist__munmap(evlist);
+out_delete_maps:
+ perf_evlist__delete_maps(evlist);
out_delete_evlist:
perf_evlist__delete(evlist);
out:
diff --git a/tools/perf/tests/pmu.c b/tools/perf/tests/pmu.c
index a5f3798..12b322f 100644
--- a/tools/perf/tests/pmu.c
+++ b/tools/perf/tests/pmu.c
@@ -19,10 +19,8 @@
{ "krava23", "config2:28-29,38\n", },
};
-#define TEST_FORMATS_CNT (sizeof(test_formats) / sizeof(struct test_format))
-
/* Simulated users input. */
-static struct parse_events__term test_terms[] = {
+static struct parse_events_term test_terms[] = {
{
.config = (char *) "krava01",
.val.num = 15,
@@ -78,7 +76,6 @@
.type_term = PARSE_EVENTS__TERM_TYPE_USER,
},
};
-#define TERMS_CNT (sizeof(test_terms) / sizeof(struct parse_events__term))
/*
* Prepare format directory data, exported by kernel
@@ -93,7 +90,7 @@
if (!mkdtemp(dir))
return NULL;
- for (i = 0; i < TEST_FORMATS_CNT; i++) {
+ for (i = 0; i < ARRAY_SIZE(test_formats); i++) {
static char name[PATH_MAX];
struct test_format *format = &test_formats[i];
FILE *file;
@@ -130,14 +127,12 @@
static LIST_HEAD(terms);
unsigned int i;
- for (i = 0; i < TERMS_CNT; i++)
+ for (i = 0; i < ARRAY_SIZE(test_terms); i++)
list_add_tail(&test_terms[i].list, &terms);
return &terms;
}
-#undef TERMS_CNT
-
int test__pmu(void)
{
char *format = test_format_dir_get();
diff --git a/tools/perf/tests/python-use.c b/tools/perf/tests/python-use.c
new file mode 100644
index 0000000..7760277
--- /dev/null
+++ b/tools/perf/tests/python-use.c
@@ -0,0 +1,23 @@
+/*
+ * Just test if we can load the python binding.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "tests.h"
+
+extern int verbose;
+
+int test__python_use(void)
+{
+ char *cmd;
+ int ret;
+
+ if (asprintf(&cmd, "echo \"import sys ; sys.path.append('%s'); import perf\" | %s %s",
+ PYTHONPATH, PYTHON, verbose ? "" : "2> /dev/null") < 0)
+ return -1;
+
+ ret = system(cmd) ? -1 : 0;
+ free(cmd);
+ return ret;
+}
diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h
index fc121ed..5de0be1 100644
--- a/tools/perf/tests/tests.h
+++ b/tools/perf/tests/tests.h
@@ -1,6 +1,12 @@
#ifndef TESTS_H
#define TESTS_H
+enum {
+ TEST_OK = 0,
+ TEST_FAIL = -1,
+ TEST_SKIP = -2,
+};
+
/* Tests */
int test__vmlinux_matches_kallsyms(void);
int test__open_syscall_event(void);
@@ -15,8 +21,7 @@
int test__attr(void);
int test__dso_data(void);
int test__parse_events(void);
-
-/* Util */
-int trace_event__id(const char *evname);
+int test__hists_link(void);
+int test__python_use(void);
#endif /* TESTS_H */
diff --git a/tools/perf/tests/util.c b/tools/perf/tests/util.c
deleted file mode 100644
index 748f2e8..0000000
--- a/tools/perf/tests/util.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "tests.h"
-#include "debugfs.h"
-
-int trace_event__id(const char *evname)
-{
- char *filename;
- int err = -1, fd;
-
- if (asprintf(&filename,
- "%s/syscalls/%s/id",
- tracing_events_path, evname) < 0)
- return -1;
-
- fd = open(filename, O_RDONLY);
- if (fd >= 0) {
- char id[16];
- if (read(fd, id, sizeof(id)) > 0)
- err = atoi(id);
- close(fd);
- }
-
- free(filename);
- return err;
-}
diff --git a/tools/perf/tests/vmlinux-kallsyms.c b/tools/perf/tests/vmlinux-kallsyms.c
index 0d1cdbe..7b4c4d2 100644
--- a/tools/perf/tests/vmlinux-kallsyms.c
+++ b/tools/perf/tests/vmlinux-kallsyms.c
@@ -44,7 +44,7 @@
*/
if (machine__create_kernel_maps(&kallsyms) < 0) {
pr_debug("machine__create_kernel_maps ");
- return -1;
+ goto out;
}
/*
@@ -101,7 +101,8 @@
*/
if (machine__load_vmlinux_path(&vmlinux, type,
vmlinux_matches_kallsyms_filter) <= 0) {
- pr_debug("machine__load_vmlinux_path ");
+ pr_debug("Couldn't find a vmlinux that matches the kernel running on this machine, skipping test\n");
+ err = TEST_SKIP;
goto out;
}
@@ -226,5 +227,7 @@
map__fprintf(pos, stderr);
}
out:
+ machine__exit(&kallsyms);
+ machine__exit(&vmlinux);
return err;
}
diff --git a/tools/perf/ui/browser.c b/tools/perf/ui/browser.c
index 4aeb7d5..809ea463 100644
--- a/tools/perf/ui/browser.c
+++ b/tools/perf/ui/browser.c
@@ -273,6 +273,8 @@
{
pthread_mutex_lock(&ui__lock);
ui_helpline__pop();
+ free(browser->helpline);
+ browser->helpline = NULL;
pthread_mutex_unlock(&ui__lock);
}
@@ -471,7 +473,7 @@
return row;
}
-static struct ui_browser__colorset {
+static struct ui_browser_colorset {
const char *name, *fg, *bg;
int colorset;
} ui_browser__colorsets[] = {
@@ -706,7 +708,7 @@
perf_config(ui_browser__color_config, NULL);
while (ui_browser__colorsets[i].name) {
- struct ui_browser__colorset *c = &ui_browser__colorsets[i++];
+ struct ui_browser_colorset *c = &ui_browser__colorsets[i++];
sltt_set_color(c->colorset, c->name, c->fg, c->bg);
}
diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 5dab3ca..7dca155 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -182,6 +182,16 @@
ab->selection = dl;
}
+static bool disasm_line__is_valid_jump(struct disasm_line *dl, struct symbol *sym)
+{
+ if (!dl || !dl->ins || !ins__is_jump(dl->ins)
+ || !disasm_line__has_offset(dl)
+ || dl->ops.target.offset >= symbol__size(sym))
+ return false;
+
+ return true;
+}
+
static void annotate_browser__draw_current_jump(struct ui_browser *browser)
{
struct annotate_browser *ab = container_of(browser, struct annotate_browser, b);
@@ -195,8 +205,7 @@
if (strstr(sym->name, "@plt"))
return;
- if (!cursor || !cursor->ins || !ins__is_jump(cursor->ins) ||
- !disasm_line__has_offset(cursor))
+ if (!disasm_line__is_valid_jump(cursor, sym))
return;
target = ab->offsets[cursor->ops.target.offset];
@@ -788,17 +797,9 @@
struct disasm_line *dl = browser->offsets[offset], *dlt;
struct browser_disasm_line *bdlt;
- if (!dl || !dl->ins || !ins__is_jump(dl->ins) ||
- !disasm_line__has_offset(dl))
+ if (!disasm_line__is_valid_jump(dl, sym))
continue;
- if (dl->ops.target.offset >= size) {
- ui__error("jump to after symbol!\n"
- "size: %zx, jump target: %" PRIx64,
- size, dl->ops.target.offset);
- continue;
- }
-
dlt = browser->offsets[dl->ops.target.offset];
/*
* FIXME: Oops, no jump target? Buggy disassembler? Or do we
@@ -921,11 +922,11 @@
#define ANNOTATE_CFG(n) \
{ .name = #n, .value = &annotate_browser__opts.n, }
-
+
/*
* Keep the entries sorted, they are bsearch'ed
*/
-static struct annotate__config {
+static struct annotate_config {
const char *name;
bool *value;
} annotate__configs[] = {
@@ -939,7 +940,7 @@
static int annotate_config__cmp(const void *name, const void *cfgp)
{
- const struct annotate__config *cfg = cfgp;
+ const struct annotate_config *cfg = cfgp;
return strcmp(name, cfg->name);
}
@@ -947,7 +948,7 @@
static int annotate__config(const char *var, const char *value,
void *data __maybe_unused)
{
- struct annotate__config *cfg;
+ struct annotate_config *cfg;
const char *name;
if (prefixcmp(var, "annotate.") != 0)
@@ -955,7 +956,7 @@
name = var + 9;
cfg = bsearch(name, annotate__configs, ARRAY_SIZE(annotate__configs),
- sizeof(struct annotate__config), annotate_config__cmp);
+ sizeof(struct annotate_config), annotate_config__cmp);
if (cfg == NULL)
return -1;
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index ccc4bd1..aa22704 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -567,26 +567,128 @@
return row - first_row;
}
-#define HPP__COLOR_FN(_name, _field) \
-static int hist_browser__hpp_color_ ## _name(struct perf_hpp *hpp, \
- struct hist_entry *he) \
-{ \
- struct hists *hists = he->hists; \
- double percent = 100.0 * he->stat._field / hists->stats.total_period; \
- *(double *)hpp->ptr = percent; \
- return scnprintf(hpp->buf, hpp->size, "%6.2f%%", percent); \
+struct hpp_arg {
+ struct ui_browser *b;
+ char folded_sign;
+ bool current_entry;
+};
+
+static int __hpp__color_callchain(struct hpp_arg *arg)
+{
+ if (!symbol_conf.use_callchain)
+ return 0;
+
+ slsmg_printf("%c ", arg->folded_sign);
+ return 2;
}
-HPP__COLOR_FN(overhead, period)
-HPP__COLOR_FN(overhead_sys, period_sys)
-HPP__COLOR_FN(overhead_us, period_us)
-HPP__COLOR_FN(overhead_guest_sys, period_guest_sys)
-HPP__COLOR_FN(overhead_guest_us, period_guest_us)
+static int __hpp__color_fmt(struct perf_hpp *hpp, struct hist_entry *he,
+ u64 (*get_field)(struct hist_entry *),
+ int (*callchain_cb)(struct hpp_arg *))
+{
+ int ret = 0;
+ double percent = 0.0;
+ struct hists *hists = he->hists;
+ struct hpp_arg *arg = hpp->ptr;
-#undef HPP__COLOR_FN
+ if (hists->stats.total_period)
+ percent = 100.0 * get_field(he) / hists->stats.total_period;
+
+ ui_browser__set_percent_color(arg->b, percent, arg->current_entry);
+
+ if (callchain_cb)
+ ret += callchain_cb(arg);
+
+ ret += scnprintf(hpp->buf, hpp->size, "%6.2f%%", percent);
+ slsmg_printf("%s", hpp->buf);
+
+ if (symbol_conf.event_group) {
+ int prev_idx, idx_delta;
+ struct perf_evsel *evsel = hists_to_evsel(hists);
+ struct hist_entry *pair;
+ int nr_members = evsel->nr_members;
+
+ if (nr_members <= 1)
+ goto out;
+
+ prev_idx = perf_evsel__group_idx(evsel);
+
+ list_for_each_entry(pair, &he->pairs.head, pairs.node) {
+ u64 period = get_field(pair);
+ u64 total = pair->hists->stats.total_period;
+
+ if (!total)
+ continue;
+
+ evsel = hists_to_evsel(pair->hists);
+ idx_delta = perf_evsel__group_idx(evsel) - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members in the middle which
+ * have no sample
+ */
+ ui_browser__set_percent_color(arg->b, 0.0,
+ arg->current_entry);
+ ret += scnprintf(hpp->buf, hpp->size,
+ " %6.2f%%", 0.0);
+ slsmg_printf("%s", hpp->buf);
+ }
+
+ percent = 100.0 * period / total;
+ ui_browser__set_percent_color(arg->b, percent,
+ arg->current_entry);
+ ret += scnprintf(hpp->buf, hpp->size,
+ " %6.2f%%", percent);
+ slsmg_printf("%s", hpp->buf);
+
+ prev_idx = perf_evsel__group_idx(evsel);
+ }
+
+ idx_delta = nr_members - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members at last which have no sample
+ */
+ ui_browser__set_percent_color(arg->b, 0.0,
+ arg->current_entry);
+ ret += scnprintf(hpp->buf, hpp->size,
+ " %6.2f%%", 0.0);
+ slsmg_printf("%s", hpp->buf);
+ }
+ }
+out:
+ if (!arg->current_entry || !arg->b->navkeypressed)
+ ui_browser__set_color(arg->b, HE_COLORSET_NORMAL);
+
+ return ret;
+}
+
+#define __HPP_COLOR_PERCENT_FN(_type, _field, _cb) \
+static u64 __hpp_get_##_field(struct hist_entry *he) \
+{ \
+ return he->stat._field; \
+} \
+ \
+static int hist_browser__hpp_color_##_type(struct perf_hpp *hpp, \
+ struct hist_entry *he) \
+{ \
+ return __hpp__color_fmt(hpp, he, __hpp_get_##_field, _cb); \
+}
+
+__HPP_COLOR_PERCENT_FN(overhead, period, __hpp__color_callchain)
+__HPP_COLOR_PERCENT_FN(overhead_sys, period_sys, NULL)
+__HPP_COLOR_PERCENT_FN(overhead_us, period_us, NULL)
+__HPP_COLOR_PERCENT_FN(overhead_guest_sys, period_guest_sys, NULL)
+__HPP_COLOR_PERCENT_FN(overhead_guest_us, period_guest_us, NULL)
+
+#undef __HPP_COLOR_PERCENT_FN
void hist_browser__init_hpp(void)
{
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD);
+
perf_hpp__init();
perf_hpp__format[PERF_HPP__OVERHEAD].color =
@@ -606,13 +708,13 @@
unsigned short row)
{
char s[256];
- double percent;
- int i, printed = 0;
+ int printed = 0;
int width = browser->b.width;
char folded_sign = ' ';
bool current_entry = ui_browser__is_current_entry(&browser->b, row);
off_t row_offset = entry->row_offset;
bool first = true;
+ struct perf_hpp_fmt *fmt;
if (current_entry) {
browser->he_selection = entry;
@@ -625,41 +727,30 @@
}
if (row_offset == 0) {
+ struct hpp_arg arg = {
+ .b = &browser->b,
+ .folded_sign = folded_sign,
+ .current_entry = current_entry,
+ };
struct perf_hpp hpp = {
.buf = s,
.size = sizeof(s),
+ .ptr = &arg,
};
ui_browser__gotorc(&browser->b, row, 0);
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
-
+ perf_hpp__for_each_format(fmt) {
if (!first) {
slsmg_printf(" ");
width -= 2;
}
first = false;
- if (perf_hpp__format[i].color) {
- hpp.ptr = &percent;
- /* It will set percent for us. See HPP__COLOR_FN above. */
- width -= perf_hpp__format[i].color(&hpp, entry);
-
- ui_browser__set_percent_color(&browser->b, percent, current_entry);
-
- if (i == PERF_HPP__OVERHEAD && symbol_conf.use_callchain) {
- slsmg_printf("%c ", folded_sign);
- width -= 2;
- }
-
- slsmg_printf("%s", s);
-
- if (!current_entry || !browser->b.navkeypressed)
- ui_browser__set_color(&browser->b, HE_COLORSET_NORMAL);
+ if (fmt->color) {
+ width -= fmt->color(&hpp, entry);
} else {
- width -= perf_hpp__format[i].entry(&hpp, entry);
+ width -= fmt->entry(&hpp, entry);
slsmg_printf("%s", s);
}
}
@@ -1098,6 +1189,21 @@
const struct thread *thread = hists->thread_filter;
unsigned long nr_samples = hists->stats.nr_events[PERF_RECORD_SAMPLE];
u64 nr_events = hists->stats.total_period;
+ struct perf_evsel *evsel = hists_to_evsel(hists);
+ char buf[512];
+ size_t buflen = sizeof(buf);
+
+ if (symbol_conf.event_group && evsel->nr_members > 1) {
+ struct perf_evsel *pos;
+
+ perf_evsel__group_desc(evsel, buf, buflen);
+ ev_name = buf;
+
+ for_each_group_member(pos, evsel) {
+ nr_samples += pos->hists.stats.nr_events[PERF_RECORD_SAMPLE];
+ nr_events += pos->hists.stats.total_period;
+ }
+ }
nr_samples = convert_unit(nr_samples, &unit);
printed = scnprintf(bf, size,
@@ -1135,6 +1241,96 @@
return timer == NULL;
}
+/*
+ * Only runtime switching of perf data file will make "input_name" point
+ * to a malloced buffer. So add "is_input_name_malloced" flag to decide
+ * whether we need to call free() for current "input_name" during the switch.
+ */
+static bool is_input_name_malloced = false;
+
+static int switch_data_file(void)
+{
+ char *pwd, *options[32], *abs_path[32], *tmp;
+ DIR *pwd_dir;
+ int nr_options = 0, choice = -1, ret = -1;
+ struct dirent *dent;
+
+ pwd = getenv("PWD");
+ if (!pwd)
+ return ret;
+
+ pwd_dir = opendir(pwd);
+ if (!pwd_dir)
+ return ret;
+
+ memset(options, 0, sizeof(options));
+ memset(options, 0, sizeof(abs_path));
+
+ while ((dent = readdir(pwd_dir))) {
+ char path[PATH_MAX];
+ u64 magic;
+ char *name = dent->d_name;
+ FILE *file;
+
+ if (!(dent->d_type == DT_REG))
+ continue;
+
+ snprintf(path, sizeof(path), "%s/%s", pwd, name);
+
+ file = fopen(path, "r");
+ if (!file)
+ continue;
+
+ if (fread(&magic, 1, 8, file) < 8)
+ goto close_file_and_continue;
+
+ if (is_perf_magic(magic)) {
+ options[nr_options] = strdup(name);
+ if (!options[nr_options])
+ goto close_file_and_continue;
+
+ abs_path[nr_options] = strdup(path);
+ if (!abs_path[nr_options]) {
+ free(options[nr_options]);
+ ui__warning("Can't search all data files due to memory shortage.\n");
+ fclose(file);
+ break;
+ }
+
+ nr_options++;
+ }
+
+close_file_and_continue:
+ fclose(file);
+ if (nr_options >= 32) {
+ ui__warning("Too many perf data files in PWD!\n"
+ "Only the first 32 files will be listed.\n");
+ break;
+ }
+ }
+ closedir(pwd_dir);
+
+ if (nr_options) {
+ choice = ui__popup_menu(nr_options, options);
+ if (choice < nr_options && choice >= 0) {
+ tmp = strdup(abs_path[choice]);
+ if (tmp) {
+ if (is_input_name_malloced)
+ free((void *)input_name);
+ input_name = tmp;
+ is_input_name_malloced = true;
+ ret = 0;
+ } else
+ ui__warning("Data switch failed due to memory shortage!\n");
+ }
+ }
+
+ free_popup_options(options, nr_options);
+ free_popup_options(abs_path, nr_options);
+ return ret;
+}
+
+
static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,
const char *helpline, const char *ev_name,
bool left_exits,
@@ -1169,7 +1365,8 @@
int choice = 0,
annotate = -2, zoom_dso = -2, zoom_thread = -2,
annotate_f = -2, annotate_t = -2, browse_map = -2;
- int scripts_comm = -2, scripts_symbol = -2, scripts_all = -2;
+ int scripts_comm = -2, scripts_symbol = -2,
+ scripts_all = -2, switch_data = -2;
nr_options = 0;
@@ -1226,6 +1423,10 @@
if (is_report_browser(hbt))
goto do_scripts;
continue;
+ case 's':
+ if (is_report_browser(hbt))
+ goto do_data_switch;
+ continue;
case K_F1:
case 'h':
case '?':
@@ -1245,6 +1446,7 @@
"d Zoom into current DSO\n"
"t Zoom into current Thread\n"
"r Run available scripts('perf report' only)\n"
+ "s Switch to another data file in PWD ('perf report' only)\n"
"P Print histograms to perf.hist.N\n"
"V Verbose (DSO names in callchains, etc)\n"
"/ Filter symbol by name");
@@ -1352,6 +1554,9 @@
if (asprintf(&options[nr_options], "Run scripts for all samples") > 0)
scripts_all = nr_options++;
+ if (is_report_browser(hbt) && asprintf(&options[nr_options],
+ "Switch to another data file in PWD") > 0)
+ switch_data = nr_options++;
add_exit_option:
options[nr_options++] = (char *)"Exit";
retry_popup_menu:
@@ -1462,6 +1667,16 @@
script_browse(script_opt);
}
+ /* Switch to another data file */
+ else if (choice == switch_data) {
+do_data_switch:
+ if (!switch_data_file()) {
+ key = K_SWITCH_INPUT_DATA;
+ break;
+ } else
+ ui__warning("Won't switch the data files due to\n"
+ "no valid data file get selected!\n");
+ }
}
out_free_stack:
pstack__delete(fstack);
@@ -1494,6 +1709,16 @@
ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
HE_COLORSET_NORMAL);
+ if (symbol_conf.event_group && evsel->nr_members > 1) {
+ struct perf_evsel *pos;
+
+ ev_name = perf_evsel__group_name(evsel);
+
+ for_each_group_member(pos, evsel) {
+ nr_events += pos->hists.stats.nr_events[PERF_RECORD_SAMPLE];
+ }
+ }
+
nr_events = convert_unit(nr_events, &unit);
printed = scnprintf(bf, sizeof(bf), "%lu%c%s%s", nr_events,
unit, unit == ' ' ? "" : " ", ev_name);
@@ -1578,6 +1803,7 @@
"Do you really want to exit?"))
continue;
/* Fall thru */
+ case K_SWITCH_INPUT_DATA:
case 'q':
case CTRL('c'):
goto out;
@@ -1604,8 +1830,19 @@
return key;
}
+static bool filter_group_entries(struct ui_browser *self __maybe_unused,
+ void *entry)
+{
+ struct perf_evsel *evsel = list_entry(entry, struct perf_evsel, node);
+
+ if (symbol_conf.event_group && !perf_evsel__is_group_leader(evsel))
+ return true;
+
+ return false;
+}
+
static int __perf_evlist__tui_browse_hists(struct perf_evlist *evlist,
- const char *help,
+ int nr_entries, const char *help,
struct hist_browser_timer *hbt,
struct perf_session_env *env)
{
@@ -1616,7 +1853,8 @@
.refresh = ui_browser__list_head_refresh,
.seek = ui_browser__list_head_seek,
.write = perf_evsel_menu__write,
- .nr_entries = evlist->nr_entries,
+ .filter = filter_group_entries,
+ .nr_entries = nr_entries,
.priv = evlist,
},
.env = env,
@@ -1632,20 +1870,37 @@
menu.b.width = line_len;
}
- return perf_evsel_menu__run(&menu, evlist->nr_entries, help, hbt);
+ return perf_evsel_menu__run(&menu, nr_entries, help, hbt);
}
int perf_evlist__tui_browse_hists(struct perf_evlist *evlist, const char *help,
struct hist_browser_timer *hbt,
struct perf_session_env *env)
{
- if (evlist->nr_entries == 1) {
+ int nr_entries = evlist->nr_entries;
+
+single_entry:
+ if (nr_entries == 1) {
struct perf_evsel *first = list_entry(evlist->entries.next,
struct perf_evsel, node);
const char *ev_name = perf_evsel__name(first);
- return perf_evsel__hists_browse(first, evlist->nr_entries, help,
+
+ return perf_evsel__hists_browse(first, nr_entries, help,
ev_name, false, hbt, env);
}
- return __perf_evlist__tui_browse_hists(evlist, help, hbt, env);
+ if (symbol_conf.event_group) {
+ struct perf_evsel *pos;
+
+ nr_entries = 0;
+ list_for_each_entry(pos, &evlist->entries, node)
+ if (perf_evsel__is_group_leader(pos))
+ nr_entries++;
+
+ if (nr_entries == 1)
+ goto single_entry;
+ }
+
+ return __perf_evlist__tui_browse_hists(evlist, nr_entries, help,
+ hbt, env);
}
diff --git a/tools/perf/ui/gtk/annotate.c b/tools/perf/ui/gtk/annotate.c
new file mode 100644
index 0000000..7d8dc58
--- /dev/null
+++ b/tools/perf/ui/gtk/annotate.c
@@ -0,0 +1,229 @@
+#include "gtk.h"
+#include "util/debug.h"
+#include "util/annotate.h"
+#include "ui/helpline.h"
+
+
+enum {
+ ANN_COL__PERCENT,
+ ANN_COL__OFFSET,
+ ANN_COL__LINE,
+
+ MAX_ANN_COLS
+};
+
+static const char *const col_names[] = {
+ "Overhead",
+ "Offset",
+ "Line"
+};
+
+static int perf_gtk__get_percent(char *buf, size_t size, struct symbol *sym,
+ struct disasm_line *dl, int evidx)
+{
+ struct sym_hist *symhist;
+ double percent = 0.0;
+ const char *markup;
+ int ret = 0;
+
+ strcpy(buf, "");
+
+ if (dl->offset == (s64) -1)
+ return 0;
+
+ symhist = annotation__histogram(symbol__annotation(sym), evidx);
+ if (!symhist->addr[dl->offset])
+ return 0;
+
+ percent = 100.0 * symhist->addr[dl->offset] / symhist->sum;
+
+ markup = perf_gtk__get_percent_color(percent);
+ if (markup)
+ ret += scnprintf(buf, size, "%s", markup);
+ ret += scnprintf(buf + ret, size - ret, "%6.2f%%", percent);
+ if (markup)
+ ret += scnprintf(buf + ret, size - ret, "</span>");
+
+ return ret;
+}
+
+static int perf_gtk__get_offset(char *buf, size_t size, struct symbol *sym,
+ struct map *map, struct disasm_line *dl)
+{
+ u64 start = map__rip_2objdump(map, sym->start);
+
+ strcpy(buf, "");
+
+ if (dl->offset == (s64) -1)
+ return 0;
+
+ return scnprintf(buf, size, "%"PRIx64, start + dl->offset);
+}
+
+static int perf_gtk__get_line(char *buf, size_t size, struct disasm_line *dl)
+{
+ int ret = 0;
+ char *line = g_markup_escape_text(dl->line, -1);
+ const char *markup = "<span fgcolor='gray'>";
+
+ strcpy(buf, "");
+
+ if (!line)
+ return 0;
+
+ if (dl->offset != (s64) -1)
+ markup = NULL;
+
+ if (markup)
+ ret += scnprintf(buf, size, "%s", markup);
+ ret += scnprintf(buf + ret, size - ret, "%s", line);
+ if (markup)
+ ret += scnprintf(buf + ret, size - ret, "</span>");
+
+ g_free(line);
+ return ret;
+}
+
+static int perf_gtk__annotate_symbol(GtkWidget *window, struct symbol *sym,
+ struct map *map, int evidx,
+ struct hist_browser_timer *hbt __maybe_unused)
+{
+ struct disasm_line *pos, *n;
+ struct annotation *notes;
+ GType col_types[MAX_ANN_COLS];
+ GtkCellRenderer *renderer;
+ GtkListStore *store;
+ GtkWidget *view;
+ int i;
+ char s[512];
+
+ notes = symbol__annotation(sym);
+
+ for (i = 0; i < MAX_ANN_COLS; i++) {
+ col_types[i] = G_TYPE_STRING;
+ }
+ store = gtk_list_store_newv(MAX_ANN_COLS, col_types);
+
+ view = gtk_tree_view_new();
+ renderer = gtk_cell_renderer_text_new();
+
+ for (i = 0; i < MAX_ANN_COLS; i++) {
+ gtk_tree_view_insert_column_with_attributes(GTK_TREE_VIEW(view),
+ -1, col_names[i], renderer, "markup",
+ i, NULL);
+ }
+
+ gtk_tree_view_set_model(GTK_TREE_VIEW(view), GTK_TREE_MODEL(store));
+ g_object_unref(GTK_TREE_MODEL(store));
+
+ list_for_each_entry(pos, ¬es->src->source, node) {
+ GtkTreeIter iter;
+
+ gtk_list_store_append(store, &iter);
+
+ if (perf_gtk__get_percent(s, sizeof(s), sym, pos, evidx))
+ gtk_list_store_set(store, &iter, ANN_COL__PERCENT, s, -1);
+ if (perf_gtk__get_offset(s, sizeof(s), sym, map, pos))
+ gtk_list_store_set(store, &iter, ANN_COL__OFFSET, s, -1);
+ if (perf_gtk__get_line(s, sizeof(s), pos))
+ gtk_list_store_set(store, &iter, ANN_COL__LINE, s, -1);
+ }
+
+ gtk_container_add(GTK_CONTAINER(window), view);
+
+ list_for_each_entry_safe(pos, n, ¬es->src->source, node) {
+ list_del(&pos->node);
+ disasm_line__free(pos);
+ }
+
+ return 0;
+}
+
+int symbol__gtk_annotate(struct symbol *sym, struct map *map, int evidx,
+ struct hist_browser_timer *hbt)
+{
+ GtkWidget *window;
+ GtkWidget *notebook;
+ GtkWidget *scrolled_window;
+ GtkWidget *tab_label;
+
+ if (map->dso->annotate_warned)
+ return -1;
+
+ if (symbol__annotate(sym, map, 0) < 0) {
+ ui__error("%s", ui_helpline__current);
+ return -1;
+ }
+
+ if (perf_gtk__is_active_context(pgctx)) {
+ window = pgctx->main_window;
+ notebook = pgctx->notebook;
+ } else {
+ GtkWidget *vbox;
+ GtkWidget *infobar;
+ GtkWidget *statbar;
+
+ signal(SIGSEGV, perf_gtk__signal);
+ signal(SIGFPE, perf_gtk__signal);
+ signal(SIGINT, perf_gtk__signal);
+ signal(SIGQUIT, perf_gtk__signal);
+ signal(SIGTERM, perf_gtk__signal);
+
+ window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+ gtk_window_set_title(GTK_WINDOW(window), "perf annotate");
+
+ g_signal_connect(window, "delete_event", gtk_main_quit, NULL);
+
+ pgctx = perf_gtk__activate_context(window);
+ if (!pgctx)
+ return -1;
+
+ vbox = gtk_vbox_new(FALSE, 0);
+ notebook = gtk_notebook_new();
+ pgctx->notebook = notebook;
+
+ gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0);
+
+ infobar = perf_gtk__setup_info_bar();
+ if (infobar) {
+ gtk_box_pack_start(GTK_BOX(vbox), infobar,
+ FALSE, FALSE, 0);
+ }
+
+ statbar = perf_gtk__setup_statusbar();
+ gtk_box_pack_start(GTK_BOX(vbox), statbar, FALSE, FALSE, 0);
+
+ gtk_container_add(GTK_CONTAINER(window), vbox);
+ }
+
+ scrolled_window = gtk_scrolled_window_new(NULL, NULL);
+ tab_label = gtk_label_new(sym->name);
+
+ gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolled_window),
+ GTK_POLICY_AUTOMATIC,
+ GTK_POLICY_AUTOMATIC);
+
+ gtk_notebook_append_page(GTK_NOTEBOOK(notebook), scrolled_window,
+ tab_label);
+
+ perf_gtk__annotate_symbol(scrolled_window, sym, map, evidx, hbt);
+ return 0;
+}
+
+void perf_gtk__show_annotations(void)
+{
+ GtkWidget *window;
+
+ if (!perf_gtk__is_active_context(pgctx))
+ return;
+
+ window = pgctx->main_window;
+ gtk_widget_show_all(window);
+
+ perf_gtk__resize_window(window);
+ gtk_window_set_position(GTK_WINDOW(window), GTK_WIN_POS_CENTER);
+
+ gtk_main();
+
+ perf_gtk__deactivate_context(&pgctx);
+}
diff --git a/tools/perf/ui/gtk/browser.c b/tools/perf/ui/gtk/browser.c
index 253b621..c95012c 100644
--- a/tools/perf/ui/gtk/browser.c
+++ b/tools/perf/ui/gtk/browser.c
@@ -8,15 +8,13 @@
#include <signal.h>
-#define MAX_COLUMNS 32
-
-static void perf_gtk__signal(int sig)
+void perf_gtk__signal(int sig)
{
perf_gtk__exit(false);
psignal(sig, "perf");
}
-static void perf_gtk__resize_window(GtkWidget *window)
+void perf_gtk__resize_window(GtkWidget *window)
{
GdkRectangle rect;
GdkScreen *screen;
@@ -36,7 +34,7 @@
gtk_window_resize(GTK_WINDOW(window), width, height);
}
-static const char *perf_gtk__get_percent_color(double percent)
+const char *perf_gtk__get_percent_color(double percent)
{
if (percent >= MIN_RED)
return "<span fgcolor='red'>";
@@ -45,155 +43,8 @@
return NULL;
}
-#define HPP__COLOR_FN(_name, _field) \
-static int perf_gtk__hpp_color_ ## _name(struct perf_hpp *hpp, \
- struct hist_entry *he) \
-{ \
- struct hists *hists = he->hists; \
- double percent = 100.0 * he->stat._field / hists->stats.total_period; \
- const char *markup; \
- int ret = 0; \
- \
- markup = perf_gtk__get_percent_color(percent); \
- if (markup) \
- ret += scnprintf(hpp->buf, hpp->size, "%s", markup); \
- ret += scnprintf(hpp->buf + ret, hpp->size - ret, "%6.2f%%", percent); \
- if (markup) \
- ret += scnprintf(hpp->buf + ret, hpp->size - ret, "</span>"); \
- \
- return ret; \
-}
-
-HPP__COLOR_FN(overhead, period)
-HPP__COLOR_FN(overhead_sys, period_sys)
-HPP__COLOR_FN(overhead_us, period_us)
-HPP__COLOR_FN(overhead_guest_sys, period_guest_sys)
-HPP__COLOR_FN(overhead_guest_us, period_guest_us)
-
-#undef HPP__COLOR_FN
-
-void perf_gtk__init_hpp(void)
-{
- perf_hpp__init();
-
- perf_hpp__format[PERF_HPP__OVERHEAD].color =
- perf_gtk__hpp_color_overhead;
- perf_hpp__format[PERF_HPP__OVERHEAD_SYS].color =
- perf_gtk__hpp_color_overhead_sys;
- perf_hpp__format[PERF_HPP__OVERHEAD_US].color =
- perf_gtk__hpp_color_overhead_us;
- perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_SYS].color =
- perf_gtk__hpp_color_overhead_guest_sys;
- perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_US].color =
- perf_gtk__hpp_color_overhead_guest_us;
-}
-
-static void perf_gtk__show_hists(GtkWidget *window, struct hists *hists)
-{
- GType col_types[MAX_COLUMNS];
- GtkCellRenderer *renderer;
- struct sort_entry *se;
- GtkListStore *store;
- struct rb_node *nd;
- GtkWidget *view;
- int i, col_idx;
- int nr_cols;
- char s[512];
-
- struct perf_hpp hpp = {
- .buf = s,
- .size = sizeof(s),
- };
-
- nr_cols = 0;
-
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
-
- col_types[nr_cols++] = G_TYPE_STRING;
- }
-
- list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (se->elide)
- continue;
-
- col_types[nr_cols++] = G_TYPE_STRING;
- }
-
- store = gtk_list_store_newv(nr_cols, col_types);
-
- view = gtk_tree_view_new();
-
- renderer = gtk_cell_renderer_text_new();
-
- col_idx = 0;
-
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
-
- perf_hpp__format[i].header(&hpp);
-
- gtk_tree_view_insert_column_with_attributes(GTK_TREE_VIEW(view),
- -1, s,
- renderer, "markup",
- col_idx++, NULL);
- }
-
- list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (se->elide)
- continue;
-
- gtk_tree_view_insert_column_with_attributes(GTK_TREE_VIEW(view),
- -1, se->se_header,
- renderer, "text",
- col_idx++, NULL);
- }
-
- gtk_tree_view_set_model(GTK_TREE_VIEW(view), GTK_TREE_MODEL(store));
-
- g_object_unref(GTK_TREE_MODEL(store));
-
- for (nd = rb_first(&hists->entries); nd; nd = rb_next(nd)) {
- struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
- GtkTreeIter iter;
-
- if (h->filtered)
- continue;
-
- gtk_list_store_append(store, &iter);
-
- col_idx = 0;
-
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
-
- if (perf_hpp__format[i].color)
- perf_hpp__format[i].color(&hpp, h);
- else
- perf_hpp__format[i].entry(&hpp, h);
-
- gtk_list_store_set(store, &iter, col_idx++, s, -1);
- }
-
- list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (se->elide)
- continue;
-
- se->se_snprintf(h, s, ARRAY_SIZE(s),
- hists__col_len(hists, se->se_width_idx));
-
- gtk_list_store_set(store, &iter, col_idx++, s, -1);
- }
- }
-
- gtk_container_add(GTK_CONTAINER(window), view);
-}
-
#ifdef HAVE_GTK_INFO_BAR
-static GtkWidget *perf_gtk__setup_info_bar(void)
+GtkWidget *perf_gtk__setup_info_bar(void)
{
GtkWidget *info_bar;
GtkWidget *label;
@@ -220,7 +71,7 @@
}
#endif
-static GtkWidget *perf_gtk__setup_statusbar(void)
+GtkWidget *perf_gtk__setup_statusbar(void)
{
GtkWidget *stbar;
unsigned ctxid;
@@ -234,79 +85,3 @@
return stbar;
}
-
-int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist,
- const char *help,
- struct hist_browser_timer *hbt __maybe_unused)
-{
- struct perf_evsel *pos;
- GtkWidget *vbox;
- GtkWidget *notebook;
- GtkWidget *info_bar;
- GtkWidget *statbar;
- GtkWidget *window;
-
- signal(SIGSEGV, perf_gtk__signal);
- signal(SIGFPE, perf_gtk__signal);
- signal(SIGINT, perf_gtk__signal);
- signal(SIGQUIT, perf_gtk__signal);
- signal(SIGTERM, perf_gtk__signal);
-
- window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
-
- gtk_window_set_title(GTK_WINDOW(window), "perf report");
-
- g_signal_connect(window, "delete_event", gtk_main_quit, NULL);
-
- pgctx = perf_gtk__activate_context(window);
- if (!pgctx)
- return -1;
-
- vbox = gtk_vbox_new(FALSE, 0);
-
- notebook = gtk_notebook_new();
-
- list_for_each_entry(pos, &evlist->entries, node) {
- struct hists *hists = &pos->hists;
- const char *evname = perf_evsel__name(pos);
- GtkWidget *scrolled_window;
- GtkWidget *tab_label;
-
- scrolled_window = gtk_scrolled_window_new(NULL, NULL);
-
- gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolled_window),
- GTK_POLICY_AUTOMATIC,
- GTK_POLICY_AUTOMATIC);
-
- perf_gtk__show_hists(scrolled_window, hists);
-
- tab_label = gtk_label_new(evname);
-
- gtk_notebook_append_page(GTK_NOTEBOOK(notebook), scrolled_window, tab_label);
- }
-
- gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0);
-
- info_bar = perf_gtk__setup_info_bar();
- if (info_bar)
- gtk_box_pack_start(GTK_BOX(vbox), info_bar, FALSE, FALSE, 0);
-
- statbar = perf_gtk__setup_statusbar();
- gtk_box_pack_start(GTK_BOX(vbox), statbar, FALSE, FALSE, 0);
-
- gtk_container_add(GTK_CONTAINER(window), vbox);
-
- gtk_widget_show_all(window);
-
- perf_gtk__resize_window(window);
-
- gtk_window_set_position(GTK_WINDOW(window), GTK_WIN_POS_CENTER);
-
- ui_helpline__push(help);
-
- gtk_main();
-
- perf_gtk__deactivate_context(&pgctx);
-
- return 0;
-}
diff --git a/tools/perf/ui/gtk/gtk.h b/tools/perf/ui/gtk/gtk.h
index 856320e..3d96785 100644
--- a/tools/perf/ui/gtk/gtk.h
+++ b/tools/perf/ui/gtk/gtk.h
@@ -10,6 +10,7 @@
struct perf_gtk_context {
GtkWidget *main_window;
+ GtkWidget *notebook;
#ifdef HAVE_GTK_INFO_BAR
GtkWidget *info_bar;
@@ -33,7 +34,14 @@
void perf_gtk__init_progress(void);
void perf_gtk__init_hpp(void);
-#ifndef HAVE_GTK_INFO_BAR
+void perf_gtk__signal(int sig);
+void perf_gtk__resize_window(GtkWidget *window);
+const char *perf_gtk__get_percent_color(double percent);
+GtkWidget *perf_gtk__setup_statusbar(void);
+
+#ifdef HAVE_GTK_INFO_BAR
+GtkWidget *perf_gtk__setup_info_bar(void);
+#else
static inline GtkWidget *perf_gtk__setup_info_bar(void)
{
return NULL;
diff --git a/tools/perf/ui/gtk/helpline.c b/tools/perf/ui/gtk/helpline.c
index 5db4432..3388cbd 100644
--- a/tools/perf/ui/gtk/helpline.c
+++ b/tools/perf/ui/gtk/helpline.c
@@ -24,17 +24,7 @@
pgctx->statbar_ctx_id, msg);
}
-static struct ui_helpline gtk_helpline_fns = {
- .pop = gtk_helpline_pop,
- .push = gtk_helpline_push,
-};
-
-void perf_gtk__init_helpline(void)
-{
- helpline_fns = >k_helpline_fns;
-}
-
-int perf_gtk__show_helpline(const char *fmt, va_list ap)
+static int gtk_helpline_show(const char *fmt, va_list ap)
{
int ret;
char *ptr;
@@ -54,3 +44,14 @@
return ret;
}
+
+static struct ui_helpline gtk_helpline_fns = {
+ .pop = gtk_helpline_pop,
+ .push = gtk_helpline_push,
+ .show = gtk_helpline_show,
+};
+
+void perf_gtk__init_helpline(void)
+{
+ helpline_fns = >k_helpline_fns;
+}
diff --git a/tools/perf/ui/gtk/hists.c b/tools/perf/ui/gtk/hists.c
new file mode 100644
index 0000000..1e764a8
--- /dev/null
+++ b/tools/perf/ui/gtk/hists.c
@@ -0,0 +1,312 @@
+#include "../evlist.h"
+#include "../cache.h"
+#include "../evsel.h"
+#include "../sort.h"
+#include "../hist.h"
+#include "../helpline.h"
+#include "gtk.h"
+
+#define MAX_COLUMNS 32
+
+static int __percent_color_snprintf(char *buf, size_t size, double percent)
+{
+ int ret = 0;
+ const char *markup;
+
+ markup = perf_gtk__get_percent_color(percent);
+ if (markup)
+ ret += scnprintf(buf, size, markup);
+
+ ret += scnprintf(buf + ret, size - ret, " %6.2f%%", percent);
+
+ if (markup)
+ ret += scnprintf(buf + ret, size - ret, "</span>");
+
+ return ret;
+}
+
+
+static int __hpp__color_fmt(struct perf_hpp *hpp, struct hist_entry *he,
+ u64 (*get_field)(struct hist_entry *))
+{
+ int ret;
+ double percent = 0.0;
+ struct hists *hists = he->hists;
+
+ if (hists->stats.total_period)
+ percent = 100.0 * get_field(he) / hists->stats.total_period;
+
+ ret = __percent_color_snprintf(hpp->buf, hpp->size, percent);
+
+ if (symbol_conf.event_group) {
+ int prev_idx, idx_delta;
+ struct perf_evsel *evsel = hists_to_evsel(hists);
+ struct hist_entry *pair;
+ int nr_members = evsel->nr_members;
+
+ if (nr_members <= 1)
+ return ret;
+
+ prev_idx = perf_evsel__group_idx(evsel);
+
+ list_for_each_entry(pair, &he->pairs.head, pairs.node) {
+ u64 period = get_field(pair);
+ u64 total = pair->hists->stats.total_period;
+
+ evsel = hists_to_evsel(pair->hists);
+ idx_delta = perf_evsel__group_idx(evsel) - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members in the middle which
+ * have no sample
+ */
+ ret += __percent_color_snprintf(hpp->buf + ret,
+ hpp->size - ret,
+ 0.0);
+ }
+
+ percent = 100.0 * period / total;
+ ret += __percent_color_snprintf(hpp->buf + ret,
+ hpp->size - ret,
+ percent);
+
+ prev_idx = perf_evsel__group_idx(evsel);
+ }
+
+ idx_delta = nr_members - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members at last which have no sample
+ */
+ ret += __percent_color_snprintf(hpp->buf + ret,
+ hpp->size - ret,
+ 0.0);
+ }
+ }
+ return ret;
+}
+
+#define __HPP_COLOR_PERCENT_FN(_type, _field) \
+static u64 he_get_##_field(struct hist_entry *he) \
+{ \
+ return he->stat._field; \
+} \
+ \
+static int perf_gtk__hpp_color_##_type(struct perf_hpp *hpp, \
+ struct hist_entry *he) \
+{ \
+ return __hpp__color_fmt(hpp, he, he_get_##_field); \
+}
+
+__HPP_COLOR_PERCENT_FN(overhead, period)
+__HPP_COLOR_PERCENT_FN(overhead_sys, period_sys)
+__HPP_COLOR_PERCENT_FN(overhead_us, period_us)
+__HPP_COLOR_PERCENT_FN(overhead_guest_sys, period_guest_sys)
+__HPP_COLOR_PERCENT_FN(overhead_guest_us, period_guest_us)
+
+#undef __HPP_COLOR_PERCENT_FN
+
+
+void perf_gtk__init_hpp(void)
+{
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD);
+
+ perf_hpp__init();
+
+ perf_hpp__format[PERF_HPP__OVERHEAD].color =
+ perf_gtk__hpp_color_overhead;
+ perf_hpp__format[PERF_HPP__OVERHEAD_SYS].color =
+ perf_gtk__hpp_color_overhead_sys;
+ perf_hpp__format[PERF_HPP__OVERHEAD_US].color =
+ perf_gtk__hpp_color_overhead_us;
+ perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_SYS].color =
+ perf_gtk__hpp_color_overhead_guest_sys;
+ perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_US].color =
+ perf_gtk__hpp_color_overhead_guest_us;
+}
+
+static void perf_gtk__show_hists(GtkWidget *window, struct hists *hists)
+{
+ struct perf_hpp_fmt *fmt;
+ GType col_types[MAX_COLUMNS];
+ GtkCellRenderer *renderer;
+ struct sort_entry *se;
+ GtkListStore *store;
+ struct rb_node *nd;
+ GtkWidget *view;
+ int col_idx;
+ int nr_cols;
+ char s[512];
+
+ struct perf_hpp hpp = {
+ .buf = s,
+ .size = sizeof(s),
+ .ptr = hists_to_evsel(hists),
+ };
+
+ nr_cols = 0;
+
+ perf_hpp__for_each_format(fmt)
+ col_types[nr_cols++] = G_TYPE_STRING;
+
+ list_for_each_entry(se, &hist_entry__sort_list, list) {
+ if (se->elide)
+ continue;
+
+ col_types[nr_cols++] = G_TYPE_STRING;
+ }
+
+ store = gtk_list_store_newv(nr_cols, col_types);
+
+ view = gtk_tree_view_new();
+
+ renderer = gtk_cell_renderer_text_new();
+
+ col_idx = 0;
+
+ perf_hpp__for_each_format(fmt) {
+ fmt->header(&hpp);
+
+ gtk_tree_view_insert_column_with_attributes(GTK_TREE_VIEW(view),
+ -1, ltrim(s),
+ renderer, "markup",
+ col_idx++, NULL);
+ }
+
+ list_for_each_entry(se, &hist_entry__sort_list, list) {
+ if (se->elide)
+ continue;
+
+ gtk_tree_view_insert_column_with_attributes(GTK_TREE_VIEW(view),
+ -1, se->se_header,
+ renderer, "text",
+ col_idx++, NULL);
+ }
+
+ gtk_tree_view_set_model(GTK_TREE_VIEW(view), GTK_TREE_MODEL(store));
+
+ g_object_unref(GTK_TREE_MODEL(store));
+
+ for (nd = rb_first(&hists->entries); nd; nd = rb_next(nd)) {
+ struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+ GtkTreeIter iter;
+
+ if (h->filtered)
+ continue;
+
+ gtk_list_store_append(store, &iter);
+
+ col_idx = 0;
+
+ perf_hpp__for_each_format(fmt) {
+ if (fmt->color)
+ fmt->color(&hpp, h);
+ else
+ fmt->entry(&hpp, h);
+
+ gtk_list_store_set(store, &iter, col_idx++, s, -1);
+ }
+
+ list_for_each_entry(se, &hist_entry__sort_list, list) {
+ if (se->elide)
+ continue;
+
+ se->se_snprintf(h, s, ARRAY_SIZE(s),
+ hists__col_len(hists, se->se_width_idx));
+
+ gtk_list_store_set(store, &iter, col_idx++, s, -1);
+ }
+ }
+
+ gtk_container_add(GTK_CONTAINER(window), view);
+}
+
+int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist,
+ const char *help,
+ struct hist_browser_timer *hbt __maybe_unused)
+{
+ struct perf_evsel *pos;
+ GtkWidget *vbox;
+ GtkWidget *notebook;
+ GtkWidget *info_bar;
+ GtkWidget *statbar;
+ GtkWidget *window;
+
+ signal(SIGSEGV, perf_gtk__signal);
+ signal(SIGFPE, perf_gtk__signal);
+ signal(SIGINT, perf_gtk__signal);
+ signal(SIGQUIT, perf_gtk__signal);
+ signal(SIGTERM, perf_gtk__signal);
+
+ window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+
+ gtk_window_set_title(GTK_WINDOW(window), "perf report");
+
+ g_signal_connect(window, "delete_event", gtk_main_quit, NULL);
+
+ pgctx = perf_gtk__activate_context(window);
+ if (!pgctx)
+ return -1;
+
+ vbox = gtk_vbox_new(FALSE, 0);
+
+ notebook = gtk_notebook_new();
+
+ gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0);
+
+ info_bar = perf_gtk__setup_info_bar();
+ if (info_bar)
+ gtk_box_pack_start(GTK_BOX(vbox), info_bar, FALSE, FALSE, 0);
+
+ statbar = perf_gtk__setup_statusbar();
+ gtk_box_pack_start(GTK_BOX(vbox), statbar, FALSE, FALSE, 0);
+
+ gtk_container_add(GTK_CONTAINER(window), vbox);
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ struct hists *hists = &pos->hists;
+ const char *evname = perf_evsel__name(pos);
+ GtkWidget *scrolled_window;
+ GtkWidget *tab_label;
+ char buf[512];
+ size_t size = sizeof(buf);
+
+ if (symbol_conf.event_group) {
+ if (!perf_evsel__is_group_leader(pos))
+ continue;
+
+ if (pos->nr_members > 1) {
+ perf_evsel__group_desc(pos, buf, size);
+ evname = buf;
+ }
+ }
+
+ scrolled_window = gtk_scrolled_window_new(NULL, NULL);
+
+ gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolled_window),
+ GTK_POLICY_AUTOMATIC,
+ GTK_POLICY_AUTOMATIC);
+
+ perf_gtk__show_hists(scrolled_window, hists);
+
+ tab_label = gtk_label_new(evname);
+
+ gtk_notebook_append_page(GTK_NOTEBOOK(notebook), scrolled_window, tab_label);
+ }
+
+ gtk_widget_show_all(window);
+
+ perf_gtk__resize_window(window);
+
+ gtk_window_set_position(GTK_WINDOW(window), GTK_WIN_POS_CENTER);
+
+ ui_helpline__push(help);
+
+ gtk_main();
+
+ perf_gtk__deactivate_context(&pgctx);
+
+ return 0;
+}
diff --git a/tools/perf/ui/helpline.c b/tools/perf/ui/helpline.c
index a49bcf3..700fb3c 100644
--- a/tools/perf/ui/helpline.c
+++ b/tools/perf/ui/helpline.c
@@ -16,9 +16,16 @@
{
}
+static int nop_helpline__show(const char *fmt __maybe_unused,
+ va_list ap __maybe_unused)
+{
+ return 0;
+}
+
static struct ui_helpline default_helpline_fns = {
.pop = nop_helpline__pop,
.push = nop_helpline__push,
+ .show = nop_helpline__show,
};
struct ui_helpline *helpline_fns = &default_helpline_fns;
@@ -59,3 +66,8 @@
ui_helpline__pop();
ui_helpline__push(msg);
}
+
+int ui_helpline__vshow(const char *fmt, va_list ap)
+{
+ return helpline_fns->show(fmt, ap);
+}
diff --git a/tools/perf/ui/helpline.h b/tools/perf/ui/helpline.h
index baa28a4..46181f4 100644
--- a/tools/perf/ui/helpline.h
+++ b/tools/perf/ui/helpline.h
@@ -9,6 +9,7 @@
struct ui_helpline {
void (*pop)(void);
void (*push)(const char *msg);
+ int (*show)(const char *fmt, va_list ap);
};
extern struct ui_helpline *helpline_fns;
@@ -20,28 +21,9 @@
void ui_helpline__vpush(const char *fmt, va_list ap);
void ui_helpline__fpush(const char *fmt, ...);
void ui_helpline__puts(const char *msg);
+int ui_helpline__vshow(const char *fmt, va_list ap);
extern char ui_helpline__current[512];
-
-#ifdef NEWT_SUPPORT
extern char ui_helpline__last_msg[];
-int ui_helpline__show_help(const char *format, va_list ap);
-#else
-static inline int ui_helpline__show_help(const char *format __maybe_unused,
- va_list ap __maybe_unused)
-{
- return 0;
-}
-#endif /* NEWT_SUPPORT */
-
-#ifdef GTK2_SUPPORT
-int perf_gtk__show_helpline(const char *format, va_list ap);
-#else
-static inline int perf_gtk__show_helpline(const char *format __maybe_unused,
- va_list ap __maybe_unused)
-{
- return 0;
-}
-#endif /* GTK2_SUPPORT */
#endif /* _PERF_UI_HELPLINE_H_ */
diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c
index aa84130..d671e63 100644
--- a/tools/perf/ui/hist.c
+++ b/tools/perf/ui/hist.c
@@ -3,151 +3,163 @@
#include "../util/hist.h"
#include "../util/util.h"
#include "../util/sort.h"
-
+#include "../util/evsel.h"
/* hist period print (hpp) functions */
-static int hpp__header_overhead(struct perf_hpp *hpp)
-{
- return scnprintf(hpp->buf, hpp->size, "Overhead");
-}
-static int hpp__width_overhead(struct perf_hpp *hpp __maybe_unused)
-{
- return 8;
-}
+typedef int (*hpp_snprint_fn)(char *buf, size_t size, const char *fmt, ...);
-static int hpp__color_overhead(struct perf_hpp *hpp, struct hist_entry *he)
+static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,
+ u64 (*get_field)(struct hist_entry *),
+ const char *fmt, hpp_snprint_fn print_fn,
+ bool fmt_percent)
{
+ int ret;
struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period / hists->stats.total_period;
- return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%%", percent);
+ if (fmt_percent) {
+ double percent = 0.0;
+
+ if (hists->stats.total_period)
+ percent = 100.0 * get_field(he) /
+ hists->stats.total_period;
+
+ ret = print_fn(hpp->buf, hpp->size, fmt, percent);
+ } else
+ ret = print_fn(hpp->buf, hpp->size, fmt, get_field(he));
+
+ if (symbol_conf.event_group) {
+ int prev_idx, idx_delta;
+ struct perf_evsel *evsel = hists_to_evsel(hists);
+ struct hist_entry *pair;
+ int nr_members = evsel->nr_members;
+
+ if (nr_members <= 1)
+ return ret;
+
+ prev_idx = perf_evsel__group_idx(evsel);
+
+ list_for_each_entry(pair, &he->pairs.head, pairs.node) {
+ u64 period = get_field(pair);
+ u64 total = pair->hists->stats.total_period;
+
+ if (!total)
+ continue;
+
+ evsel = hists_to_evsel(pair->hists);
+ idx_delta = perf_evsel__group_idx(evsel) - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members in the middle which
+ * have no sample
+ */
+ ret += print_fn(hpp->buf + ret, hpp->size - ret,
+ fmt, 0);
+ }
+
+ if (fmt_percent)
+ ret += print_fn(hpp->buf + ret, hpp->size - ret,
+ fmt, 100.0 * period / total);
+ else
+ ret += print_fn(hpp->buf + ret, hpp->size - ret,
+ fmt, period);
+
+ prev_idx = perf_evsel__group_idx(evsel);
+ }
+
+ idx_delta = nr_members - prev_idx - 1;
+
+ while (idx_delta--) {
+ /*
+ * zero-fill group members at last which have no sample
+ */
+ ret += print_fn(hpp->buf + ret, hpp->size - ret,
+ fmt, 0);
+ }
+ }
+ return ret;
}
-static int hpp__entry_overhead(struct perf_hpp *hpp, struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period / hists->stats.total_period;
- const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%%";
-
- return scnprintf(hpp->buf, hpp->size, fmt, percent);
+#define __HPP_HEADER_FN(_type, _str, _min_width, _unit_width) \
+static int hpp__header_##_type(struct perf_hpp *hpp) \
+{ \
+ int len = _min_width; \
+ \
+ if (symbol_conf.event_group) { \
+ struct perf_evsel *evsel = hpp->ptr; \
+ \
+ len = max(len, evsel->nr_members * _unit_width); \
+ } \
+ return scnprintf(hpp->buf, hpp->size, "%*s", len, _str); \
}
-static int hpp__header_overhead_sys(struct perf_hpp *hpp)
-{
- const char *fmt = symbol_conf.field_sep ? "%s" : "%7s";
-
- return scnprintf(hpp->buf, hpp->size, fmt, "sys");
+#define __HPP_WIDTH_FN(_type, _min_width, _unit_width) \
+static int hpp__width_##_type(struct perf_hpp *hpp __maybe_unused) \
+{ \
+ int len = _min_width; \
+ \
+ if (symbol_conf.event_group) { \
+ struct perf_evsel *evsel = hpp->ptr; \
+ \
+ len = max(len, evsel->nr_members * _unit_width); \
+ } \
+ return len; \
}
-static int hpp__width_overhead_sys(struct perf_hpp *hpp __maybe_unused)
-{
- return 7;
+#define __HPP_COLOR_PERCENT_FN(_type, _field) \
+static u64 he_get_##_field(struct hist_entry *he) \
+{ \
+ return he->stat._field; \
+} \
+ \
+static int hpp__color_##_type(struct perf_hpp *hpp, struct hist_entry *he) \
+{ \
+ return __hpp__fmt(hpp, he, he_get_##_field, " %6.2f%%", \
+ (hpp_snprint_fn)percent_color_snprintf, true); \
}
-static int hpp__color_overhead_sys(struct perf_hpp *hpp, struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_sys / hists->stats.total_period;
-
- return percent_color_snprintf(hpp->buf, hpp->size, "%6.2f%%", percent);
+#define __HPP_ENTRY_PERCENT_FN(_type, _field) \
+static int hpp__entry_##_type(struct perf_hpp *hpp, struct hist_entry *he) \
+{ \
+ const char *fmt = symbol_conf.field_sep ? " %.2f" : " %6.2f%%"; \
+ return __hpp__fmt(hpp, he, he_get_##_field, fmt, \
+ scnprintf, true); \
}
-static int hpp__entry_overhead_sys(struct perf_hpp *hpp, struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_sys / hists->stats.total_period;
- const char *fmt = symbol_conf.field_sep ? "%.2f" : "%6.2f%%";
-
- return scnprintf(hpp->buf, hpp->size, fmt, percent);
+#define __HPP_ENTRY_RAW_FN(_type, _field) \
+static u64 he_get_raw_##_field(struct hist_entry *he) \
+{ \
+ return he->stat._field; \
+} \
+ \
+static int hpp__entry_##_type(struct perf_hpp *hpp, struct hist_entry *he) \
+{ \
+ const char *fmt = symbol_conf.field_sep ? " %"PRIu64 : " %11"PRIu64; \
+ return __hpp__fmt(hpp, he, he_get_raw_##_field, fmt, scnprintf, false); \
}
-static int hpp__header_overhead_us(struct perf_hpp *hpp)
-{
- const char *fmt = symbol_conf.field_sep ? "%s" : "%7s";
+#define HPP_PERCENT_FNS(_type, _str, _field, _min_width, _unit_width) \
+__HPP_HEADER_FN(_type, _str, _min_width, _unit_width) \
+__HPP_WIDTH_FN(_type, _min_width, _unit_width) \
+__HPP_COLOR_PERCENT_FN(_type, _field) \
+__HPP_ENTRY_PERCENT_FN(_type, _field)
- return scnprintf(hpp->buf, hpp->size, fmt, "user");
-}
+#define HPP_RAW_FNS(_type, _str, _field, _min_width, _unit_width) \
+__HPP_HEADER_FN(_type, _str, _min_width, _unit_width) \
+__HPP_WIDTH_FN(_type, _min_width, _unit_width) \
+__HPP_ENTRY_RAW_FN(_type, _field)
-static int hpp__width_overhead_us(struct perf_hpp *hpp __maybe_unused)
-{
- return 7;
-}
-static int hpp__color_overhead_us(struct perf_hpp *hpp, struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_us / hists->stats.total_period;
+HPP_PERCENT_FNS(overhead, "Overhead", period, 8, 8)
+HPP_PERCENT_FNS(overhead_sys, "sys", period_sys, 8, 8)
+HPP_PERCENT_FNS(overhead_us, "usr", period_us, 8, 8)
+HPP_PERCENT_FNS(overhead_guest_sys, "guest sys", period_guest_sys, 9, 8)
+HPP_PERCENT_FNS(overhead_guest_us, "guest usr", period_guest_us, 9, 8)
- return percent_color_snprintf(hpp->buf, hpp->size, "%6.2f%%", percent);
-}
+HPP_RAW_FNS(samples, "Samples", nr_events, 12, 12)
+HPP_RAW_FNS(period, "Period", period, 12, 12)
-static int hpp__entry_overhead_us(struct perf_hpp *hpp, struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_us / hists->stats.total_period;
- const char *fmt = symbol_conf.field_sep ? "%.2f" : "%6.2f%%";
-
- return scnprintf(hpp->buf, hpp->size, fmt, percent);
-}
-
-static int hpp__header_overhead_guest_sys(struct perf_hpp *hpp)
-{
- return scnprintf(hpp->buf, hpp->size, "guest sys");
-}
-
-static int hpp__width_overhead_guest_sys(struct perf_hpp *hpp __maybe_unused)
-{
- return 9;
-}
-
-static int hpp__color_overhead_guest_sys(struct perf_hpp *hpp,
- struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_guest_sys / hists->stats.total_period;
-
- return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%% ", percent);
-}
-
-static int hpp__entry_overhead_guest_sys(struct perf_hpp *hpp,
- struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_guest_sys / hists->stats.total_period;
- const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%% ";
-
- return scnprintf(hpp->buf, hpp->size, fmt, percent);
-}
-
-static int hpp__header_overhead_guest_us(struct perf_hpp *hpp)
-{
- return scnprintf(hpp->buf, hpp->size, "guest usr");
-}
-
-static int hpp__width_overhead_guest_us(struct perf_hpp *hpp __maybe_unused)
-{
- return 9;
-}
-
-static int hpp__color_overhead_guest_us(struct perf_hpp *hpp,
- struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_guest_us / hists->stats.total_period;
-
- return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%% ", percent);
-}
-
-static int hpp__entry_overhead_guest_us(struct perf_hpp *hpp,
- struct hist_entry *he)
-{
- struct hists *hists = he->hists;
- double percent = 100.0 * he->stat.period_guest_us / hists->stats.total_period;
- const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%% ";
-
- return scnprintf(hpp->buf, hpp->size, fmt, percent);
-}
static int hpp__header_baseline(struct perf_hpp *hpp)
{
@@ -179,7 +191,7 @@
{
double percent = baseline_percent(he);
- if (hist_entry__has_pairs(he))
+ if (hist_entry__has_pairs(he) || symbol_conf.field_sep)
return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%%", percent);
else
return scnprintf(hpp->buf, hpp->size, " ");
@@ -196,44 +208,6 @@
return scnprintf(hpp->buf, hpp->size, " ");
}
-static int hpp__header_samples(struct perf_hpp *hpp)
-{
- const char *fmt = symbol_conf.field_sep ? "%s" : "%11s";
-
- return scnprintf(hpp->buf, hpp->size, fmt, "Samples");
-}
-
-static int hpp__width_samples(struct perf_hpp *hpp __maybe_unused)
-{
- return 11;
-}
-
-static int hpp__entry_samples(struct perf_hpp *hpp, struct hist_entry *he)
-{
- const char *fmt = symbol_conf.field_sep ? "%" PRIu64 : "%11" PRIu64;
-
- return scnprintf(hpp->buf, hpp->size, fmt, he->stat.nr_events);
-}
-
-static int hpp__header_period(struct perf_hpp *hpp)
-{
- const char *fmt = symbol_conf.field_sep ? "%s" : "%12s";
-
- return scnprintf(hpp->buf, hpp->size, fmt, "Period");
-}
-
-static int hpp__width_period(struct perf_hpp *hpp __maybe_unused)
-{
- return 12;
-}
-
-static int hpp__entry_period(struct perf_hpp *hpp, struct hist_entry *he)
-{
- const char *fmt = symbol_conf.field_sep ? "%" PRIu64 : "%12" PRIu64;
-
- return scnprintf(hpp->buf, hpp->size, fmt, he->stat.period);
-}
-
static int hpp__header_period_baseline(struct perf_hpp *hpp)
{
const char *fmt = symbol_conf.field_sep ? "%s" : "%12s";
@@ -254,6 +228,7 @@
return scnprintf(hpp->buf, hpp->size, fmt, period);
}
+
static int hpp__header_delta(struct perf_hpp *hpp)
{
const char *fmt = symbol_conf.field_sep ? "%s" : "%7s";
@@ -268,14 +243,18 @@
static int hpp__entry_delta(struct perf_hpp *hpp, struct hist_entry *he)
{
+ struct hist_entry *pair = hist_entry__next_pair(he);
const char *fmt = symbol_conf.field_sep ? "%s" : "%7.7s";
char buf[32] = " ";
- double diff;
+ double diff = 0.0;
- if (he->diff.computed)
- diff = he->diff.period_ratio_delta;
- else
- diff = perf_diff__compute_delta(he);
+ if (pair) {
+ if (he->diff.computed)
+ diff = he->diff.period_ratio_delta;
+ else
+ diff = perf_diff__compute_delta(he, pair);
+ } else
+ diff = perf_diff__period_percent(he, he->stat.period);
if (fabs(diff) >= 0.01)
scnprintf(buf, sizeof(buf), "%+4.2F%%", diff);
@@ -297,14 +276,17 @@
static int hpp__entry_ratio(struct perf_hpp *hpp, struct hist_entry *he)
{
+ struct hist_entry *pair = hist_entry__next_pair(he);
const char *fmt = symbol_conf.field_sep ? "%s" : "%14s";
char buf[32] = " ";
- double ratio;
+ double ratio = 0.0;
- if (he->diff.computed)
- ratio = he->diff.period_ratio;
- else
- ratio = perf_diff__compute_ratio(he);
+ if (pair) {
+ if (he->diff.computed)
+ ratio = he->diff.period_ratio;
+ else
+ ratio = perf_diff__compute_ratio(he, pair);
+ }
if (ratio > 0.0)
scnprintf(buf, sizeof(buf), "%+14.6F", ratio);
@@ -326,14 +308,17 @@
static int hpp__entry_wdiff(struct perf_hpp *hpp, struct hist_entry *he)
{
+ struct hist_entry *pair = hist_entry__next_pair(he);
const char *fmt = symbol_conf.field_sep ? "%s" : "%14s";
char buf[32] = " ";
- s64 wdiff;
+ s64 wdiff = 0;
- if (he->diff.computed)
- wdiff = he->diff.wdiff;
- else
- wdiff = perf_diff__compute_wdiff(he);
+ if (pair) {
+ if (he->diff.computed)
+ wdiff = he->diff.wdiff;
+ else
+ wdiff = perf_diff__compute_wdiff(he, pair);
+ }
if (wdiff != 0)
scnprintf(buf, sizeof(buf), "%14ld", wdiff);
@@ -341,30 +326,6 @@
return scnprintf(hpp->buf, hpp->size, fmt, buf);
}
-static int hpp__header_displ(struct perf_hpp *hpp)
-{
- return scnprintf(hpp->buf, hpp->size, "Displ.");
-}
-
-static int hpp__width_displ(struct perf_hpp *hpp __maybe_unused)
-{
- return 6;
-}
-
-static int hpp__entry_displ(struct perf_hpp *hpp,
- struct hist_entry *he)
-{
- struct hist_entry *pair = hist_entry__next_pair(he);
- long displacement = pair ? pair->position - he->position : 0;
- const char *fmt = symbol_conf.field_sep ? "%s" : "%6.6s";
- char buf[32] = " ";
-
- if (displacement)
- scnprintf(buf, sizeof(buf), "%+4ld", displacement);
-
- return scnprintf(hpp->buf, hpp->size, fmt, buf);
-}
-
static int hpp__header_formula(struct perf_hpp *hpp)
{
const char *fmt = symbol_conf.field_sep ? "%s" : "%70s";
@@ -379,67 +340,91 @@
static int hpp__entry_formula(struct perf_hpp *hpp, struct hist_entry *he)
{
+ struct hist_entry *pair = hist_entry__next_pair(he);
const char *fmt = symbol_conf.field_sep ? "%s" : "%-70s";
char buf[96] = " ";
- perf_diff__formula(buf, sizeof(buf), he);
+ if (pair)
+ perf_diff__formula(he, pair, buf, sizeof(buf));
+
return scnprintf(hpp->buf, hpp->size, fmt, buf);
}
-#define HPP__COLOR_PRINT_FNS(_name) \
- .header = hpp__header_ ## _name, \
- .width = hpp__width_ ## _name, \
- .color = hpp__color_ ## _name, \
- .entry = hpp__entry_ ## _name
+#define HPP__COLOR_PRINT_FNS(_name) \
+ { \
+ .header = hpp__header_ ## _name, \
+ .width = hpp__width_ ## _name, \
+ .color = hpp__color_ ## _name, \
+ .entry = hpp__entry_ ## _name \
+ }
-#define HPP__PRINT_FNS(_name) \
- .header = hpp__header_ ## _name, \
- .width = hpp__width_ ## _name, \
- .entry = hpp__entry_ ## _name
+#define HPP__PRINT_FNS(_name) \
+ { \
+ .header = hpp__header_ ## _name, \
+ .width = hpp__width_ ## _name, \
+ .entry = hpp__entry_ ## _name \
+ }
struct perf_hpp_fmt perf_hpp__format[] = {
- { .cond = false, HPP__COLOR_PRINT_FNS(baseline) },
- { .cond = true, HPP__COLOR_PRINT_FNS(overhead) },
- { .cond = false, HPP__COLOR_PRINT_FNS(overhead_sys) },
- { .cond = false, HPP__COLOR_PRINT_FNS(overhead_us) },
- { .cond = false, HPP__COLOR_PRINT_FNS(overhead_guest_sys) },
- { .cond = false, HPP__COLOR_PRINT_FNS(overhead_guest_us) },
- { .cond = false, HPP__PRINT_FNS(samples) },
- { .cond = false, HPP__PRINT_FNS(period) },
- { .cond = false, HPP__PRINT_FNS(period_baseline) },
- { .cond = false, HPP__PRINT_FNS(delta) },
- { .cond = false, HPP__PRINT_FNS(ratio) },
- { .cond = false, HPP__PRINT_FNS(wdiff) },
- { .cond = false, HPP__PRINT_FNS(displ) },
- { .cond = false, HPP__PRINT_FNS(formula) }
+ HPP__COLOR_PRINT_FNS(baseline),
+ HPP__COLOR_PRINT_FNS(overhead),
+ HPP__COLOR_PRINT_FNS(overhead_sys),
+ HPP__COLOR_PRINT_FNS(overhead_us),
+ HPP__COLOR_PRINT_FNS(overhead_guest_sys),
+ HPP__COLOR_PRINT_FNS(overhead_guest_us),
+ HPP__PRINT_FNS(samples),
+ HPP__PRINT_FNS(period),
+ HPP__PRINT_FNS(period_baseline),
+ HPP__PRINT_FNS(delta),
+ HPP__PRINT_FNS(ratio),
+ HPP__PRINT_FNS(wdiff),
+ HPP__PRINT_FNS(formula)
};
+LIST_HEAD(perf_hpp__list);
+
+
#undef HPP__COLOR_PRINT_FNS
#undef HPP__PRINT_FNS
+#undef HPP_PERCENT_FNS
+#undef HPP_RAW_FNS
+
+#undef __HPP_HEADER_FN
+#undef __HPP_WIDTH_FN
+#undef __HPP_COLOR_PERCENT_FN
+#undef __HPP_ENTRY_PERCENT_FN
+#undef __HPP_ENTRY_RAW_FN
+
+
void perf_hpp__init(void)
{
if (symbol_conf.show_cpu_utilization) {
- perf_hpp__format[PERF_HPP__OVERHEAD_SYS].cond = true;
- perf_hpp__format[PERF_HPP__OVERHEAD_US].cond = true;
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD_SYS);
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD_US);
if (perf_guest) {
- perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_SYS].cond = true;
- perf_hpp__format[PERF_HPP__OVERHEAD_GUEST_US].cond = true;
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD_GUEST_SYS);
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD_GUEST_US);
}
}
if (symbol_conf.show_nr_samples)
- perf_hpp__format[PERF_HPP__SAMPLES].cond = true;
+ perf_hpp__column_enable(PERF_HPP__SAMPLES);
if (symbol_conf.show_total_period)
- perf_hpp__format[PERF_HPP__PERIOD].cond = true;
+ perf_hpp__column_enable(PERF_HPP__PERIOD);
}
-void perf_hpp__column_enable(unsigned col, bool enable)
+void perf_hpp__column_register(struct perf_hpp_fmt *format)
+{
+ list_add_tail(&format->list, &perf_hpp__list);
+}
+
+void perf_hpp__column_enable(unsigned col)
{
BUG_ON(col >= PERF_HPP__MAX_INDEX);
- perf_hpp__format[col].cond = enable;
+ perf_hpp__column_register(&perf_hpp__format[col]);
}
static inline void advance_hpp(struct perf_hpp *hpp, int inc)
@@ -452,27 +437,29 @@
bool color)
{
const char *sep = symbol_conf.field_sep;
+ struct perf_hpp_fmt *fmt;
char *start = hpp->buf;
- int i, ret;
+ int ret;
bool first = true;
if (symbol_conf.exclude_other && !he->parent)
return 0;
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
-
+ perf_hpp__for_each_format(fmt) {
+ /*
+ * If there's no field_sep, we still need
+ * to display initial ' '.
+ */
if (!sep || !first) {
ret = scnprintf(hpp->buf, hpp->size, "%s", sep ?: " ");
advance_hpp(hpp, ret);
+ } else
first = false;
- }
- if (color && perf_hpp__format[i].color)
- ret = perf_hpp__format[i].color(hpp, he);
+ if (color && fmt->color)
+ ret = fmt->color(hpp, he);
else
- ret = perf_hpp__format[i].entry(hpp, he);
+ ret = fmt->entry(hpp, he);
advance_hpp(hpp, ret);
}
@@ -504,16 +491,18 @@
*/
unsigned int hists__sort_list_width(struct hists *hists)
{
+ struct perf_hpp_fmt *fmt;
struct sort_entry *se;
- int i, ret = 0;
+ int i = 0, ret = 0;
+ struct perf_hpp dummy_hpp = {
+ .ptr = hists_to_evsel(hists),
+ };
- for (i = 0; i < PERF_HPP__MAX_INDEX; i++) {
- if (!perf_hpp__format[i].cond)
- continue;
+ perf_hpp__for_each_format(fmt) {
if (i)
ret += 2;
- ret += perf_hpp__format[i].width(NULL);
+ ret += fmt->width(&dummy_hpp);
}
list_for_each_entry(se, &hist_entry__sort_list, list)
diff --git a/tools/perf/ui/keysyms.h b/tools/perf/ui/keysyms.h
index 809eca5..65092d5 100644
--- a/tools/perf/ui/keysyms.h
+++ b/tools/perf/ui/keysyms.h
@@ -23,5 +23,6 @@
#define K_TIMER -1
#define K_ERROR -2
#define K_RESIZE -3
+#define K_SWITCH_INPUT_DATA -4
#endif /* _PERF_KEYSYMS_H_ */
diff --git a/tools/perf/ui/setup.c b/tools/perf/ui/setup.c
index ebb4cc1..ae6a789 100644
--- a/tools/perf/ui/setup.c
+++ b/tools/perf/ui/setup.c
@@ -8,7 +8,7 @@
void setup_browser(bool fallback_to_pager)
{
- if (!isatty(1) || dump_trace)
+ if (use_browser < 2 && (!isatty(1) || dump_trace))
use_browser = 0;
/* default to TUI */
@@ -30,6 +30,7 @@
if (fallback_to_pager)
setup_pager();
+ perf_hpp__column_enable(PERF_HPP__OVERHEAD);
perf_hpp__init();
break;
}
diff --git a/tools/perf/ui/stdio/hist.c b/tools/perf/ui/stdio/hist.c
index f0ee204..ff1f60c 100644
--- a/tools/perf/ui/stdio/hist.c
+++ b/tools/perf/ui/stdio/hist.c
@@ -3,6 +3,7 @@
#include "../../util/util.h"
#include "../../util/hist.h"
#include "../../util/sort.h"
+#include "../../util/evsel.h"
static size_t callchain__fprintf_left_margin(FILE *fp, int left_margin)
@@ -335,17 +336,19 @@
size_t hists__fprintf(struct hists *hists, bool show_header, int max_rows,
int max_cols, FILE *fp)
{
+ struct perf_hpp_fmt *fmt;
struct sort_entry *se;
struct rb_node *nd;
size_t ret = 0;
unsigned int width;
const char *sep = symbol_conf.field_sep;
const char *col_width = symbol_conf.col_width_list_str;
- int idx, nr_rows = 0;
+ int nr_rows = 0;
char bf[96];
struct perf_hpp dummy_hpp = {
.buf = bf,
.size = sizeof(bf),
+ .ptr = hists_to_evsel(hists),
};
bool first = true;
@@ -355,16 +358,14 @@
goto print_entries;
fprintf(fp, "# ");
- for (idx = 0; idx < PERF_HPP__MAX_INDEX; idx++) {
- if (!perf_hpp__format[idx].cond)
- continue;
+ perf_hpp__for_each_format(fmt) {
if (!first)
fprintf(fp, "%s", sep ?: " ");
else
first = false;
- perf_hpp__format[idx].header(&dummy_hpp);
+ fmt->header(&dummy_hpp);
fprintf(fp, "%s", bf);
}
@@ -400,18 +401,16 @@
first = true;
fprintf(fp, "# ");
- for (idx = 0; idx < PERF_HPP__MAX_INDEX; idx++) {
- unsigned int i;
- if (!perf_hpp__format[idx].cond)
- continue;
+ perf_hpp__for_each_format(fmt) {
+ unsigned int i;
if (!first)
fprintf(fp, "%s", sep ?: " ");
else
first = false;
- width = perf_hpp__format[idx].width(&dummy_hpp);
+ width = fmt->width(&dummy_hpp);
for (i = 0; i < width; i++)
fprintf(fp, ".");
}
@@ -462,7 +461,7 @@
return ret;
}
-size_t hists__fprintf_nr_events(struct hists *hists, FILE *fp)
+size_t events_stats__fprintf(struct events_stats *stats, FILE *fp)
{
int i;
size_t ret = 0;
@@ -470,7 +469,7 @@
for (i = 0; i < PERF_RECORD_HEADER_MAX; ++i) {
const char *name;
- if (hists->stats.nr_events[i] == 0)
+ if (stats->nr_events[i] == 0)
continue;
name = perf_event__name(i);
@@ -478,7 +477,7 @@
continue;
ret += fprintf(fp, "%16s events: %10d\n", name,
- hists->stats.nr_events[i]);
+ stats->nr_events[i]);
}
return ret;
diff --git a/tools/perf/ui/tui/helpline.c b/tools/perf/ui/tui/helpline.c
index 2884d2f..1c8b9af 100644
--- a/tools/perf/ui/tui/helpline.c
+++ b/tools/perf/ui/tui/helpline.c
@@ -8,6 +8,8 @@
#include "../ui.h"
#include "../libslang.h"
+char ui_helpline__last_msg[1024];
+
static void tui_helpline__pop(void)
{
}
@@ -23,20 +25,7 @@
strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
}
-struct ui_helpline tui_helpline_fns = {
- .pop = tui_helpline__pop,
- .push = tui_helpline__push,
-};
-
-void ui_helpline__init(void)
-{
- helpline_fns = &tui_helpline_fns;
- ui_helpline__puts(" ");
-}
-
-char ui_helpline__last_msg[1024];
-
-int ui_helpline__show_help(const char *format, va_list ap)
+static int tui_helpline__show(const char *format, va_list ap)
{
int ret;
static int backlog;
@@ -55,3 +44,15 @@
return ret;
}
+
+struct ui_helpline tui_helpline_fns = {
+ .pop = tui_helpline__pop,
+ .push = tui_helpline__push,
+ .show = tui_helpline__show,
+};
+
+void ui_helpline__init(void)
+{
+ helpline_fns = &tui_helpline_fns;
+ ui_helpline__puts(" ");
+}
diff --git a/tools/perf/ui/util.c b/tools/perf/ui/util.c
index 4f98977..e3e0a96 100644
--- a/tools/perf/ui/util.c
+++ b/tools/perf/ui/util.c
@@ -52,7 +52,6 @@
return ret;
}
-
/**
* perf_error__register - Register error logging functions
* @eops: The pointer to error logging function struct
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 6aa34e5..055fef3 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -26,13 +26,13 @@
if test -r $GVF
then
- VC=$(sed -e 's/^PERF_VERSION = //' <$GVF)
+ VC=$(sed -e 's/^#define PERF_VERSION "\(.*\)"/\1/' <$GVF)
else
VC=unset
fi
test "$VN" = "$VC" || {
echo >&2 "PERF_VERSION = $VN"
- echo "PERF_VERSION = $VN" >$GVF
+ echo "#define PERF_VERSION \"$VN\"" >$GVF
}
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 07aaeea..d33fe93 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -809,7 +809,7 @@
pr_err("Can't annotate %s:\n\n"
"No vmlinux file%s\nwas found in the path.\n\n"
"Please use:\n\n"
- " perf buildid-cache -av vmlinux\n\n"
+ " perf buildid-cache -vu vmlinux\n\n"
"or:\n\n"
" --vmlinux vmlinux\n",
sym->name, build_id_msg ?: "");
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index 8eec943..c422440 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -6,6 +6,7 @@
#include "types.h"
#include "symbol.h"
#include "hist.h"
+#include "sort.h"
#include <linux/list.h>
#include <linux/rbtree.h>
#include <pthread.h>
@@ -154,6 +155,29 @@
}
#endif
+#ifdef GTK2_SUPPORT
+int symbol__gtk_annotate(struct symbol *sym, struct map *map, int evidx,
+ struct hist_browser_timer *hbt);
+
+static inline int hist_entry__gtk_annotate(struct hist_entry *he, int evidx,
+ struct hist_browser_timer *hbt)
+{
+ return symbol__gtk_annotate(he->ms.sym, he->ms.map, evidx, hbt);
+}
+
+void perf_gtk__show_annotations(void);
+#else
+static inline int hist_entry__gtk_annotate(struct hist_entry *he __maybe_unused,
+ int evidx __maybe_unused,
+ struct hist_browser_timer *hbt
+ __maybe_unused)
+{
+ return 0;
+}
+
+static inline void perf_gtk__show_annotations(void) {}
+#endif
+
extern const char *disassembler_style;
#endif /* __PERF_ANNOTATE_H */
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index d3b3f5d..42b6a63 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -444,7 +444,7 @@
struct callchain_cursor_node *node = *cursor->last;
if (!node) {
- node = calloc(sizeof(*node), 1);
+ node = calloc(1, sizeof(*node));
if (!node)
return -ENOMEM;
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index eb34057..3ee9f67 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -143,4 +143,9 @@
cursor->curr = cursor->curr->next;
cursor->pos++;
}
+
+struct option;
+
+int record_parse_callchain_opt(const struct option *opt, const char *arg, int unset);
+extern const char record_callchain_help[];
#endif /* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 2b32ffa..f817046 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -1,4 +1,5 @@
#include "util.h"
+#include "sysfs.h"
#include "../perf.h"
#include "cpumap.h"
#include <assert.h>
@@ -201,3 +202,56 @@
{
free(map);
}
+
+int cpu_map__get_socket(struct cpu_map *map, int idx)
+{
+ FILE *fp;
+ const char *mnt;
+ char path[PATH_MAX];
+ int cpu, ret;
+
+ if (idx > map->nr)
+ return -1;
+
+ cpu = map->map[idx];
+
+ mnt = sysfs_find_mountpoint();
+ if (!mnt)
+ return -1;
+
+ sprintf(path,
+ "%s/devices/system/cpu/cpu%d/topology/physical_package_id",
+ mnt, cpu);
+
+ fp = fopen(path, "r");
+ if (!fp)
+ return -1;
+ ret = fscanf(fp, "%d", &cpu);
+ fclose(fp);
+ return ret == 1 ? cpu : -1;
+}
+
+int cpu_map__build_socket_map(struct cpu_map *cpus, struct cpu_map **sockp)
+{
+ struct cpu_map *sock;
+ int nr = cpus->nr;
+ int cpu, s1, s2;
+
+ sock = calloc(1, sizeof(*sock) + nr * sizeof(int));
+ if (!sock)
+ return -1;
+
+ for (cpu = 0; cpu < nr; cpu++) {
+ s1 = cpu_map__get_socket(cpus, cpu);
+ for (s2 = 0; s2 < sock->nr; s2++) {
+ if (s1 == sock->map[s2])
+ break;
+ }
+ if (s2 == sock->nr) {
+ sock->map[sock->nr] = s1;
+ sock->nr++;
+ }
+ }
+ *sockp = sock;
+ return 0;
+}
diff --git a/tools/perf/util/cpumap.h b/tools/perf/util/cpumap.h
index 2f68a3b..161b007 100644
--- a/tools/perf/util/cpumap.h
+++ b/tools/perf/util/cpumap.h
@@ -14,6 +14,15 @@
void cpu_map__delete(struct cpu_map *map);
struct cpu_map *cpu_map__read(FILE *file);
size_t cpu_map__fprintf(struct cpu_map *map, FILE *fp);
+int cpu_map__get_socket(struct cpu_map *map, int idx);
+int cpu_map__build_socket_map(struct cpu_map *cpus, struct cpu_map **sockp);
+
+static inline int cpu_map__socket(struct cpu_map *sock, int s)
+{
+ if (!sock || s > sock->nr || s < 0)
+ return 0;
+ return sock->map[s];
+}
static inline int cpu_map__nr(const struct cpu_map *map)
{
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index 03f830b..399e74c 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -23,10 +23,8 @@
if (verbose >= level) {
va_start(args, fmt);
- if (use_browser == 1)
- ret = ui_helpline__show_help(fmt, args);
- else if (use_browser == 2)
- ret = perf_gtk__show_helpline(fmt, args);
+ if (use_browser >= 1)
+ ui_helpline__vshow(fmt, args);
else
ret = vfprintf(stderr, fmt, args);
va_end(args);
@@ -49,28 +47,6 @@
return ret;
}
-#if !defined(NEWT_SUPPORT) && !defined(GTK2_SUPPORT)
-int ui__warning(const char *format, ...)
-{
- va_list args;
-
- va_start(args, format);
- vfprintf(stderr, format, args);
- va_end(args);
- return 0;
-}
-#endif
-
-int ui__error_paranoid(void)
-{
- return ui__error("Permission error - are you root?\n"
- "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
- " -1 - Not paranoid at all\n"
- " 0 - Disallow raw tracepoint access for unpriv\n"
- " 1 - Disallow cpu events for unpriv\n"
- " 2 - Disallow kernel profiling for unpriv\n");
-}
-
void trace_event(union perf_event *event)
{
unsigned char *raw_event = (void *)event;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 83e8d23..efbd988 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -5,6 +5,8 @@
#include <stdbool.h>
#include "event.h"
#include "../ui/helpline.h"
+#include "../ui/progress.h"
+#include "../ui/util.h"
extern int verbose;
extern bool quiet, dump_trace;
@@ -12,39 +14,7 @@
int dump_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
void trace_event(union perf_event *event);
-struct ui_progress;
-struct perf_error_ops;
-
-#if defined(NEWT_SUPPORT) || defined(GTK2_SUPPORT)
-
-#include "../ui/progress.h"
int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
-#include "../ui/util.h"
-
-#else
-
-static inline void ui_progress__update(u64 curr __maybe_unused,
- u64 total __maybe_unused,
- const char *title __maybe_unused) {}
-static inline void ui_progress__finish(void) {}
-
-#define ui__error(format, arg...) ui__warning(format, ##arg)
-
-static inline int
-perf_error__register(struct perf_error_ops *eops __maybe_unused)
-{
- return 0;
-}
-
-static inline int
-perf_error__unregister(struct perf_error_ops *eops __maybe_unused)
-{
- return 0;
-}
-
-#endif /* NEWT_SUPPORT || GTK2_SUPPORT */
-
int ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
-int ui__error_paranoid(void);
#endif /* __PERF_DEBUG_H */
diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index d6d9a46..6f7d5a9 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -539,13 +539,13 @@
}
size_t __dsos__fprintf_buildid(struct list_head *head, FILE *fp,
- bool with_hits)
+ bool (skip)(struct dso *dso, int parm), int parm)
{
struct dso *pos;
size_t ret = 0;
list_for_each_entry(pos, head, node) {
- if (with_hits && !pos->hit)
+ if (skip && skip(pos, parm))
continue;
ret += dso__fprintf_buildid(pos, fp);
ret += fprintf(fp, " %s\n", pos->long_name);
@@ -583,7 +583,7 @@
if (dso->short_name != dso->long_name)
ret += fprintf(fp, "%s, ", dso->long_name);
ret += fprintf(fp, "%s, %sloaded, ", map_type__name[type],
- dso->loaded ? "" : "NOT ");
+ dso__loaded(dso, type) ? "" : "NOT ");
ret += dso__fprintf_buildid(dso, fp);
ret += fprintf(fp, ")\n");
for (nd = rb_first(&dso->symbols[type]); nd; nd = rb_next(nd)) {
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index e032769..450199a 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -138,7 +138,7 @@
bool __dsos__read_build_ids(struct list_head *head, bool with_hits);
size_t __dsos__fprintf_buildid(struct list_head *head, FILE *fp,
- bool with_hits);
+ bool (skip)(struct dso *dso, int parm), int parm);
size_t __dsos__fprintf(struct list_head *head, FILE *fp);
size_t dso__fprintf_buildid(struct dso *dso, FILE *fp);
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 3cf2c3e..5cd13d7 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -476,8 +476,10 @@
}
}
- if (kallsyms__parse(filename, &args, find_symbol_cb) <= 0)
+ if (kallsyms__parse(filename, &args, find_symbol_cb) <= 0) {
+ free(event);
return -ENOENT;
+ }
map = machine->vmlinux_maps[MAP__FUNCTION];
size = snprintf(event->mmap.filename, sizeof(event->mmap.filename),
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 7052934..bc4ad79 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -49,10 +49,16 @@
return evlist;
}
-void perf_evlist__config_attrs(struct perf_evlist *evlist,
- struct perf_record_opts *opts)
+void perf_evlist__config(struct perf_evlist *evlist,
+ struct perf_record_opts *opts)
{
struct perf_evsel *evsel;
+ /*
+ * Set the evsel leader links before we configure attributes,
+ * since some might depend on this info.
+ */
+ if (opts->group)
+ perf_evlist__set_leader(evlist);
if (evlist->cpus->map[0] < 0)
opts->no_inherit = true;
@@ -61,7 +67,7 @@
perf_evsel__config(evsel, opts);
if (evlist->nr_entries > 1)
- evsel->attr.sample_type |= PERF_SAMPLE_ID;
+ perf_evsel__set_sample_id(evsel);
}
}
@@ -111,18 +117,21 @@
struct perf_evsel *evsel, *leader;
leader = list_entry(list->next, struct perf_evsel, node);
- leader->leader = NULL;
+ evsel = list_entry(list->prev, struct perf_evsel, node);
+
+ leader->nr_members = evsel->idx - leader->idx + 1;
list_for_each_entry(evsel, list, node) {
- if (evsel != leader)
- evsel->leader = leader;
+ evsel->leader = leader;
}
}
void perf_evlist__set_leader(struct perf_evlist *evlist)
{
- if (evlist->nr_entries)
+ if (evlist->nr_entries) {
+ evlist->nr_groups = evlist->nr_entries > 1 ? 1 : 0;
__perf_evlist__set_leader(&evlist->entries);
+ }
}
int perf_evlist__add_default(struct perf_evlist *evlist)
@@ -222,7 +231,7 @@
for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
list_for_each_entry(pos, &evlist->entries, node) {
- if (perf_evsel__is_group_member(pos))
+ if (!perf_evsel__is_group_leader(pos))
continue;
for (thread = 0; thread < evlist->threads->nr; thread++)
ioctl(FD(pos, cpu, thread),
@@ -238,7 +247,7 @@
for (cpu = 0; cpu < cpu_map__nr(evlist->cpus); cpu++) {
list_for_each_entry(pos, &evlist->entries, node) {
- if (perf_evsel__is_group_member(pos))
+ if (!perf_evsel__is_group_leader(pos))
continue;
for (thread = 0; thread < evlist->threads->nr; thread++)
ioctl(FD(pos, cpu, thread),
@@ -366,7 +375,7 @@
if ((old & md->mask) + size != ((old + size) & md->mask)) {
unsigned int offset = old;
unsigned int len = min(sizeof(*event), size), cpy;
- void *dst = &evlist->event_copy;
+ void *dst = &md->event_copy;
do {
cpy = min(md->mask + 1 - (offset & md->mask), len);
@@ -376,7 +385,7 @@
len -= cpy;
} while (len);
- event = &evlist->event_copy;
+ event = &md->event_copy;
}
old += size;
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 56003f7..2dd07bd 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -17,10 +17,18 @@
#define PERF_EVLIST__HLIST_BITS 8
#define PERF_EVLIST__HLIST_SIZE (1 << PERF_EVLIST__HLIST_BITS)
+struct perf_mmap {
+ void *base;
+ int mask;
+ unsigned int prev;
+ union perf_event event_copy;
+};
+
struct perf_evlist {
struct list_head entries;
struct hlist_head heads[PERF_EVLIST__HLIST_SIZE];
int nr_entries;
+ int nr_groups;
int nr_fds;
int nr_mmaps;
int mmap_len;
@@ -29,7 +37,6 @@
pid_t pid;
} workload;
bool overwrite;
- union perf_event event_copy;
struct perf_mmap *mmap;
struct pollfd *pollfd;
struct thread_map *threads;
@@ -76,8 +83,8 @@
int perf_evlist__open(struct perf_evlist *evlist);
-void perf_evlist__config_attrs(struct perf_evlist *evlist,
- struct perf_record_opts *opts);
+void perf_evlist__config(struct perf_evlist *evlist,
+ struct perf_record_opts *opts);
int perf_evlist__prepare_workload(struct perf_evlist *evlist,
struct perf_record_opts *opts,
@@ -135,4 +142,25 @@
}
size_t perf_evlist__fprintf(struct perf_evlist *evlist, FILE *fp);
+
+static inline unsigned int perf_mmap__read_head(struct perf_mmap *mm)
+{
+ struct perf_event_mmap_page *pc = mm->base;
+ int head = pc->data_head;
+ rmb();
+ return head;
+}
+
+static inline void perf_mmap__write_tail(struct perf_mmap *md,
+ unsigned long tail)
+{
+ struct perf_event_mmap_page *pc = md->base;
+
+ /*
+ * ensure all reads are done before we write the tail out.
+ */
+ /* mb(); */
+ pc->data_tail = tail;
+}
+
#endif /* __PERF_EVLIST_H */
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 1b16dd1..9c82f98f 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -22,6 +22,11 @@
#include <linux/perf_event.h>
#include "perf_regs.h"
+static struct {
+ bool sample_id_all;
+ bool exclude_guest;
+} perf_missing_features;
+
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
static int __perf_evsel__sample_size(u64 sample_type)
@@ -50,11 +55,36 @@
pthread_mutex_init(&hists->lock, NULL);
}
+void __perf_evsel__set_sample_bit(struct perf_evsel *evsel,
+ enum perf_event_sample_format bit)
+{
+ if (!(evsel->attr.sample_type & bit)) {
+ evsel->attr.sample_type |= bit;
+ evsel->sample_size += sizeof(u64);
+ }
+}
+
+void __perf_evsel__reset_sample_bit(struct perf_evsel *evsel,
+ enum perf_event_sample_format bit)
+{
+ if (evsel->attr.sample_type & bit) {
+ evsel->attr.sample_type &= ~bit;
+ evsel->sample_size -= sizeof(u64);
+ }
+}
+
+void perf_evsel__set_sample_id(struct perf_evsel *evsel)
+{
+ perf_evsel__set_sample_bit(evsel, ID);
+ evsel->attr.read_format |= PERF_FORMAT_ID;
+}
+
void perf_evsel__init(struct perf_evsel *evsel,
struct perf_event_attr *attr, int idx)
{
evsel->idx = idx;
evsel->attr = *attr;
+ evsel->leader = evsel;
INIT_LIST_HEAD(&evsel->node);
hists__init(&evsel->hists);
evsel->sample_size = __perf_evsel__sample_size(attr->sample_type);
@@ -404,6 +434,31 @@
return evsel->name ?: "unknown";
}
+const char *perf_evsel__group_name(struct perf_evsel *evsel)
+{
+ return evsel->group_name ?: "anon group";
+}
+
+int perf_evsel__group_desc(struct perf_evsel *evsel, char *buf, size_t size)
+{
+ int ret;
+ struct perf_evsel *pos;
+ const char *group_name = perf_evsel__group_name(evsel);
+
+ ret = scnprintf(buf, size, "%s", group_name);
+
+ ret += scnprintf(buf + ret, size - ret, " { %s",
+ perf_evsel__name(evsel));
+
+ for_each_group_member(pos, evsel)
+ ret += scnprintf(buf + ret, size - ret, ", %s",
+ perf_evsel__name(pos));
+
+ ret += scnprintf(buf + ret, size - ret, " }");
+
+ return ret;
+}
+
/*
* The enable_on_exec/disabled value strategy:
*
@@ -438,13 +493,11 @@
struct perf_event_attr *attr = &evsel->attr;
int track = !evsel->idx; /* only the first counter needs these */
- attr->sample_id_all = opts->sample_id_all_missing ? 0 : 1;
+ attr->sample_id_all = perf_missing_features.sample_id_all ? 0 : 1;
attr->inherit = !opts->no_inherit;
- attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
- PERF_FORMAT_TOTAL_TIME_RUNNING |
- PERF_FORMAT_ID;
- attr->sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+ perf_evsel__set_sample_bit(evsel, IP);
+ perf_evsel__set_sample_bit(evsel, TID);
/*
* We default some events to a 1 default interval. But keep
@@ -453,7 +506,7 @@
if (!attr->sample_period || (opts->user_freq != UINT_MAX &&
opts->user_interval != ULLONG_MAX)) {
if (opts->freq) {
- attr->sample_type |= PERF_SAMPLE_PERIOD;
+ perf_evsel__set_sample_bit(evsel, PERIOD);
attr->freq = 1;
attr->sample_freq = opts->freq;
} else {
@@ -468,16 +521,16 @@
attr->inherit_stat = 1;
if (opts->sample_address) {
- attr->sample_type |= PERF_SAMPLE_ADDR;
+ perf_evsel__set_sample_bit(evsel, ADDR);
attr->mmap_data = track;
}
if (opts->call_graph) {
- attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
+ perf_evsel__set_sample_bit(evsel, CALLCHAIN);
if (opts->call_graph == CALLCHAIN_DWARF) {
- attr->sample_type |= PERF_SAMPLE_REGS_USER |
- PERF_SAMPLE_STACK_USER;
+ perf_evsel__set_sample_bit(evsel, REGS_USER);
+ perf_evsel__set_sample_bit(evsel, STACK_USER);
attr->sample_regs_user = PERF_REGS_MASK;
attr->sample_stack_user = opts->stack_dump_size;
attr->exclude_callchain_user = 1;
@@ -485,20 +538,20 @@
}
if (perf_target__has_cpu(&opts->target))
- attr->sample_type |= PERF_SAMPLE_CPU;
+ perf_evsel__set_sample_bit(evsel, CPU);
if (opts->period)
- attr->sample_type |= PERF_SAMPLE_PERIOD;
+ perf_evsel__set_sample_bit(evsel, PERIOD);
- if (!opts->sample_id_all_missing &&
+ if (!perf_missing_features.sample_id_all &&
(opts->sample_time || !opts->no_inherit ||
perf_target__has_cpu(&opts->target)))
- attr->sample_type |= PERF_SAMPLE_TIME;
+ perf_evsel__set_sample_bit(evsel, TIME);
if (opts->raw_samples) {
- attr->sample_type |= PERF_SAMPLE_TIME;
- attr->sample_type |= PERF_SAMPLE_RAW;
- attr->sample_type |= PERF_SAMPLE_CPU;
+ perf_evsel__set_sample_bit(evsel, TIME);
+ perf_evsel__set_sample_bit(evsel, RAW);
+ perf_evsel__set_sample_bit(evsel, CPU);
}
if (opts->no_delay) {
@@ -506,7 +559,7 @@
attr->wakeup_events = 1;
}
if (opts->branch_stack) {
- attr->sample_type |= PERF_SAMPLE_BRANCH_STACK;
+ perf_evsel__set_sample_bit(evsel, BRANCH_STACK);
attr->branch_sample_type = opts->branch_stack;
}
@@ -519,14 +572,14 @@
* Disabling only independent events or group leaders,
* keeping group members enabled.
*/
- if (!perf_evsel__is_group_member(evsel))
+ if (perf_evsel__is_group_leader(evsel))
attr->disabled = 1;
/*
* Setting enable_on_exec for independent events and
* group leaders for traced executed by perf.
*/
- if (perf_target__none(&opts->target) && !perf_evsel__is_group_member(evsel))
+ if (perf_target__none(&opts->target) && perf_evsel__is_group_leader(evsel))
attr->enable_on_exec = 1;
}
@@ -612,6 +665,11 @@
}
}
+void perf_evsel__free_counts(struct perf_evsel *evsel)
+{
+ free(evsel->counts);
+}
+
void perf_evsel__exit(struct perf_evsel *evsel)
{
assert(list_empty(&evsel->node));
@@ -631,6 +689,28 @@
free(evsel);
}
+static inline void compute_deltas(struct perf_evsel *evsel,
+ int cpu,
+ struct perf_counts_values *count)
+{
+ struct perf_counts_values tmp;
+
+ if (!evsel->prev_raw_counts)
+ return;
+
+ if (cpu == -1) {
+ tmp = evsel->prev_raw_counts->aggr;
+ evsel->prev_raw_counts->aggr = *count;
+ } else {
+ tmp = evsel->prev_raw_counts->cpu[cpu];
+ evsel->prev_raw_counts->cpu[cpu] = *count;
+ }
+
+ count->val = count->val - tmp.val;
+ count->ena = count->ena - tmp.ena;
+ count->run = count->run - tmp.run;
+}
+
int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
int cpu, int thread, bool scale)
{
@@ -646,6 +726,8 @@
if (readn(FD(evsel, cpu, thread), &count, nv * sizeof(u64)) < 0)
return -errno;
+ compute_deltas(evsel, cpu, &count);
+
if (scale) {
if (count.run == 0)
count.val = 0;
@@ -684,6 +766,8 @@
}
}
+ compute_deltas(evsel, -1, aggr);
+
evsel->counts->scaled = 0;
if (scale) {
if (aggr->run == 0) {
@@ -707,7 +791,7 @@
struct perf_evsel *leader = evsel->leader;
int fd;
- if (!perf_evsel__is_group_member(evsel))
+ if (perf_evsel__is_group_leader(evsel))
return -1;
/*
@@ -738,6 +822,13 @@
pid = evsel->cgrp->fd;
}
+fallback_missing_features:
+ if (perf_missing_features.exclude_guest)
+ evsel->attr.exclude_guest = evsel->attr.exclude_host = 0;
+retry_sample_id:
+ if (perf_missing_features.sample_id_all)
+ evsel->attr.sample_id_all = 0;
+
for (cpu = 0; cpu < cpus->nr; cpu++) {
for (thread = 0; thread < threads->nr; thread++) {
@@ -754,13 +845,26 @@
group_fd, flags);
if (FD(evsel, cpu, thread) < 0) {
err = -errno;
- goto out_close;
+ goto try_fallback;
}
}
}
return 0;
+try_fallback:
+ if (err != -EINVAL || cpu > 0 || thread > 0)
+ goto out_close;
+
+ if (!perf_missing_features.exclude_guest &&
+ (evsel->attr.exclude_guest || evsel->attr.exclude_host)) {
+ perf_missing_features.exclude_guest = true;
+ goto fallback_missing_features;
+ } else if (!perf_missing_features.sample_id_all) {
+ perf_missing_features.sample_id_all = true;
+ goto retry_sample_id;
+ }
+
out_close:
do {
while (--thread >= 0) {
@@ -1205,3 +1309,225 @@
return 0;
}
+
+static int comma_fprintf(FILE *fp, bool *first, const char *fmt, ...)
+{
+ va_list args;
+ int ret = 0;
+
+ if (!*first) {
+ ret += fprintf(fp, ",");
+ } else {
+ ret += fprintf(fp, ":");
+ *first = false;
+ }
+
+ va_start(args, fmt);
+ ret += vfprintf(fp, fmt, args);
+ va_end(args);
+ return ret;
+}
+
+static int __if_fprintf(FILE *fp, bool *first, const char *field, u64 value)
+{
+ if (value == 0)
+ return 0;
+
+ return comma_fprintf(fp, first, " %s: %" PRIu64, field, value);
+}
+
+#define if_print(field) printed += __if_fprintf(fp, &first, #field, evsel->attr.field)
+
+struct bit_names {
+ int bit;
+ const char *name;
+};
+
+static int bits__fprintf(FILE *fp, const char *field, u64 value,
+ struct bit_names *bits, bool *first)
+{
+ int i = 0, printed = comma_fprintf(fp, first, " %s: ", field);
+ bool first_bit = true;
+
+ do {
+ if (value & bits[i].bit) {
+ printed += fprintf(fp, "%s%s", first_bit ? "" : "|", bits[i].name);
+ first_bit = false;
+ }
+ } while (bits[++i].name != NULL);
+
+ return printed;
+}
+
+static int sample_type__fprintf(FILE *fp, bool *first, u64 value)
+{
+#define bit_name(n) { PERF_SAMPLE_##n, #n }
+ struct bit_names bits[] = {
+ bit_name(IP), bit_name(TID), bit_name(TIME), bit_name(ADDR),
+ bit_name(READ), bit_name(CALLCHAIN), bit_name(ID), bit_name(CPU),
+ bit_name(PERIOD), bit_name(STREAM_ID), bit_name(RAW),
+ bit_name(BRANCH_STACK), bit_name(REGS_USER), bit_name(STACK_USER),
+ { .name = NULL, }
+ };
+#undef bit_name
+ return bits__fprintf(fp, "sample_type", value, bits, first);
+}
+
+static int read_format__fprintf(FILE *fp, bool *first, u64 value)
+{
+#define bit_name(n) { PERF_FORMAT_##n, #n }
+ struct bit_names bits[] = {
+ bit_name(TOTAL_TIME_ENABLED), bit_name(TOTAL_TIME_RUNNING),
+ bit_name(ID), bit_name(GROUP),
+ { .name = NULL, }
+ };
+#undef bit_name
+ return bits__fprintf(fp, "read_format", value, bits, first);
+}
+
+int perf_evsel__fprintf(struct perf_evsel *evsel,
+ struct perf_attr_details *details, FILE *fp)
+{
+ bool first = true;
+ int printed = 0;
+
+ if (details->event_group) {
+ struct perf_evsel *pos;
+
+ if (!perf_evsel__is_group_leader(evsel))
+ return 0;
+
+ if (evsel->nr_members > 1)
+ printed += fprintf(fp, "%s{", evsel->group_name ?: "");
+
+ printed += fprintf(fp, "%s", perf_evsel__name(evsel));
+ for_each_group_member(pos, evsel)
+ printed += fprintf(fp, ",%s", perf_evsel__name(pos));
+
+ if (evsel->nr_members > 1)
+ printed += fprintf(fp, "}");
+ goto out;
+ }
+
+ printed += fprintf(fp, "%s", perf_evsel__name(evsel));
+
+ if (details->verbose || details->freq) {
+ printed += comma_fprintf(fp, &first, " sample_freq=%" PRIu64,
+ (u64)evsel->attr.sample_freq);
+ }
+
+ if (details->verbose) {
+ if_print(type);
+ if_print(config);
+ if_print(config1);
+ if_print(config2);
+ if_print(size);
+ printed += sample_type__fprintf(fp, &first, evsel->attr.sample_type);
+ if (evsel->attr.read_format)
+ printed += read_format__fprintf(fp, &first, evsel->attr.read_format);
+ if_print(disabled);
+ if_print(inherit);
+ if_print(pinned);
+ if_print(exclusive);
+ if_print(exclude_user);
+ if_print(exclude_kernel);
+ if_print(exclude_hv);
+ if_print(exclude_idle);
+ if_print(mmap);
+ if_print(comm);
+ if_print(freq);
+ if_print(inherit_stat);
+ if_print(enable_on_exec);
+ if_print(task);
+ if_print(watermark);
+ if_print(precise_ip);
+ if_print(mmap_data);
+ if_print(sample_id_all);
+ if_print(exclude_host);
+ if_print(exclude_guest);
+ if_print(__reserved_1);
+ if_print(wakeup_events);
+ if_print(bp_type);
+ if_print(branch_sample_type);
+ }
+out:
+ fputc('\n', fp);
+ return ++printed;
+}
+
+bool perf_evsel__fallback(struct perf_evsel *evsel, int err,
+ char *msg, size_t msgsize)
+{
+ if ((err == ENOENT || err == ENXIO) &&
+ evsel->attr.type == PERF_TYPE_HARDWARE &&
+ evsel->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
+ /*
+ * If it's cycles then fall back to hrtimer based
+ * cpu-clock-tick sw counter, which is always available even if
+ * no PMU support.
+ *
+ * PPC returns ENXIO until 2.6.37 (behavior changed with commit
+ * b0a873e).
+ */
+ scnprintf(msg, msgsize, "%s",
+"The cycles event is not supported, trying to fall back to cpu-clock-ticks");
+
+ evsel->attr.type = PERF_TYPE_SOFTWARE;
+ evsel->attr.config = PERF_COUNT_SW_CPU_CLOCK;
+
+ free(evsel->name);
+ evsel->name = NULL;
+ return true;
+ }
+
+ return false;
+}
+
+int perf_evsel__open_strerror(struct perf_evsel *evsel,
+ struct perf_target *target,
+ int err, char *msg, size_t size)
+{
+ switch (err) {
+ case EPERM:
+ case EACCES:
+ return scnprintf(msg, size, "%s",
+ "You may not have permission to collect %sstats.\n"
+ "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
+ " -1 - Not paranoid at all\n"
+ " 0 - Disallow raw tracepoint access for unpriv\n"
+ " 1 - Disallow cpu events for unpriv\n"
+ " 2 - Disallow kernel profiling for unpriv",
+ target->system_wide ? "system-wide " : "");
+ case ENOENT:
+ return scnprintf(msg, size, "The %s event is not supported.",
+ perf_evsel__name(evsel));
+ case EMFILE:
+ return scnprintf(msg, size, "%s",
+ "Too many events are opened.\n"
+ "Try again after reducing the number of events.");
+ case ENODEV:
+ if (target->cpu_list)
+ return scnprintf(msg, size, "%s",
+ "No such device - did you specify an out-of-range profile CPU?\n");
+ break;
+ case EOPNOTSUPP:
+ if (evsel->attr.precise_ip)
+ return scnprintf(msg, size, "%s",
+ "\'precise\' request may not be supported. Try removing 'p' modifier.");
+#if defined(__i386__) || defined(__x86_64__)
+ if (evsel->attr.type == PERF_TYPE_HARDWARE)
+ return scnprintf(msg, size, "%s",
+ "No hardware sampling interrupt available.\n"
+ "No APIC? If so then you can boot the kernel with the \"lapic\" boot parameter to force-enable it.");
+#endif
+ break;
+ default:
+ break;
+ }
+
+ return scnprintf(msg, size,
+ "The sys_perf_event_open() syscall returned with %d (%s) for event (%s). \n"
+ "/bin/dmesg may provide additional information.\n"
+ "No CONFIG_PERF_EVENTS=y kernel support configured?\n",
+ err, strerror(err), perf_evsel__name(evsel));
+}
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 3d2b801..52021c3 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -53,6 +53,7 @@
struct xyarray *sample_id;
u64 *id;
struct perf_counts *counts;
+ struct perf_counts *prev_raw_counts;
int idx;
u32 ids;
struct hists hists;
@@ -73,10 +74,13 @@
bool needs_swap;
/* parse modifier helper */
int exclude_GH;
+ int nr_members;
struct perf_evsel *leader;
char *group_name;
};
+#define hists_to_evsel(h) container_of(h, struct perf_evsel, hists)
+
struct cpu_map;
struct thread_map;
struct perf_evlist;
@@ -110,14 +114,30 @@
int __perf_evsel__hw_cache_type_op_res_name(u8 type, u8 op, u8 result,
char *bf, size_t size);
const char *perf_evsel__name(struct perf_evsel *evsel);
+const char *perf_evsel__group_name(struct perf_evsel *evsel);
+int perf_evsel__group_desc(struct perf_evsel *evsel, char *buf, size_t size);
int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
int perf_evsel__alloc_id(struct perf_evsel *evsel, int ncpus, int nthreads);
int perf_evsel__alloc_counts(struct perf_evsel *evsel, int ncpus);
void perf_evsel__free_fd(struct perf_evsel *evsel);
void perf_evsel__free_id(struct perf_evsel *evsel);
+void perf_evsel__free_counts(struct perf_evsel *evsel);
void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
+void __perf_evsel__set_sample_bit(struct perf_evsel *evsel,
+ enum perf_event_sample_format bit);
+void __perf_evsel__reset_sample_bit(struct perf_evsel *evsel,
+ enum perf_event_sample_format bit);
+
+#define perf_evsel__set_sample_bit(evsel, bit) \
+ __perf_evsel__set_sample_bit(evsel, PERF_SAMPLE_##bit)
+
+#define perf_evsel__reset_sample_bit(evsel, bit) \
+ __perf_evsel__reset_sample_bit(evsel, PERF_SAMPLE_##bit)
+
+void perf_evsel__set_sample_id(struct perf_evsel *evsel);
+
int perf_evsel__set_filter(struct perf_evsel *evsel, int ncpus, int nthreads,
const char *filter);
@@ -226,8 +246,34 @@
return list_entry(evsel->node.next, struct perf_evsel, node);
}
-static inline bool perf_evsel__is_group_member(const struct perf_evsel *evsel)
+static inline bool perf_evsel__is_group_leader(const struct perf_evsel *evsel)
{
- return evsel->leader != NULL;
+ return evsel->leader == evsel;
}
+
+struct perf_attr_details {
+ bool freq;
+ bool verbose;
+ bool event_group;
+};
+
+int perf_evsel__fprintf(struct perf_evsel *evsel,
+ struct perf_attr_details *details, FILE *fp);
+
+bool perf_evsel__fallback(struct perf_evsel *evsel, int err,
+ char *msg, size_t msgsize);
+int perf_evsel__open_strerror(struct perf_evsel *evsel,
+ struct perf_target *target,
+ int err, char *msg, size_t size);
+
+static inline int perf_evsel__group_idx(struct perf_evsel *evsel)
+{
+ return evsel->idx - evsel->leader->idx;
+}
+
+#define for_each_group_member(_evsel, _leader) \
+for ((_evsel) = list_entry((_leader)->node.next, struct perf_evsel, node); \
+ (_evsel) && (_evsel)->leader == (_leader); \
+ (_evsel) = list_entry((_evsel)->node.next, struct perf_evsel, node))
+
#endif /* __PERF_EVSEL_H */
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index b7da463..f4bfd79 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -148,7 +148,7 @@
u32 len;
char *buf;
- sz = read(fd, &len, sizeof(len));
+ sz = readn(fd, &len, sizeof(len));
if (sz < (ssize_t)sizeof(len))
return NULL;
@@ -159,7 +159,7 @@
if (!buf)
return NULL;
- ret = read(fd, buf, len);
+ ret = readn(fd, buf, len);
if (ret == (ssize_t)len) {
/*
* strings are padded by zeroes
@@ -287,12 +287,12 @@
struct perf_session *session = container_of(header,
struct perf_session, header);
struct rb_node *nd;
- int err = machine__write_buildid_table(&session->host_machine, fd);
+ int err = machine__write_buildid_table(&session->machines.host, fd);
if (err)
return err;
- for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
err = machine__write_buildid_table(pos, fd);
if (err)
@@ -313,7 +313,8 @@
if (is_kallsyms) {
if (symbol_conf.kptr_restrict) {
pr_debug("Not caching a kptr_restrict'ed /proc/kallsyms\n");
- return 0;
+ err = 0;
+ goto out_free;
}
realname = (char *) name;
} else
@@ -448,9 +449,9 @@
if (mkdir(debugdir, 0755) != 0 && errno != EEXIST)
return -1;
- ret = machine__cache_build_ids(&session->host_machine, debugdir);
+ ret = machine__cache_build_ids(&session->machines.host, debugdir);
- for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret |= machine__cache_build_ids(pos, debugdir);
}
@@ -467,9 +468,9 @@
static bool perf_session__read_build_ids(struct perf_session *session, bool with_hits)
{
struct rb_node *nd;
- bool ret = machine__read_build_ids(&session->host_machine, with_hits);
+ bool ret = machine__read_build_ids(&session->machines.host, with_hits);
- for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret |= machine__read_build_ids(pos, with_hits);
}
@@ -954,6 +955,7 @@
}
fclose(fp);
+ fp = NULL;
ret = do_write(fd, &mem_total, sizeof(u64));
if (ret)
@@ -980,7 +982,8 @@
ret = do_write_string(fd, buf);
done:
free(buf);
- fclose(fp);
+ if (fp)
+ fclose(fp);
return ret;
}
@@ -1051,16 +1054,25 @@
struct perf_pmu *pmu = NULL;
off_t offset = lseek(fd, 0, SEEK_CUR);
__u32 pmu_num = 0;
+ int ret;
/* write real pmu_num later */
- do_write(fd, &pmu_num, sizeof(pmu_num));
+ ret = do_write(fd, &pmu_num, sizeof(pmu_num));
+ if (ret < 0)
+ return ret;
while ((pmu = perf_pmu__scan(pmu))) {
if (!pmu->name)
continue;
pmu_num++;
- do_write(fd, &pmu->type, sizeof(pmu->type));
- do_write_string(fd, pmu->name);
+
+ ret = do_write(fd, &pmu->type, sizeof(pmu->type));
+ if (ret < 0)
+ return ret;
+
+ ret = do_write_string(fd, pmu->name);
+ if (ret < 0)
+ return ret;
}
if (pwrite(fd, &pmu_num, sizeof(pmu_num), offset) != sizeof(pmu_num)) {
@@ -1073,6 +1085,52 @@
}
/*
+ * File format:
+ *
+ * struct group_descs {
+ * u32 nr_groups;
+ * struct group_desc {
+ * char name[];
+ * u32 leader_idx;
+ * u32 nr_members;
+ * }[nr_groups];
+ * };
+ */
+static int write_group_desc(int fd, struct perf_header *h __maybe_unused,
+ struct perf_evlist *evlist)
+{
+ u32 nr_groups = evlist->nr_groups;
+ struct perf_evsel *evsel;
+ int ret;
+
+ ret = do_write(fd, &nr_groups, sizeof(nr_groups));
+ if (ret < 0)
+ return ret;
+
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ if (perf_evsel__is_group_leader(evsel) &&
+ evsel->nr_members > 1) {
+ const char *name = evsel->group_name ?: "{anon_group}";
+ u32 leader_idx = evsel->idx;
+ u32 nr_members = evsel->nr_members;
+
+ ret = do_write_string(fd, name);
+ if (ret < 0)
+ return ret;
+
+ ret = do_write(fd, &leader_idx, sizeof(leader_idx));
+ if (ret < 0)
+ return ret;
+
+ ret = do_write(fd, &nr_members, sizeof(nr_members));
+ if (ret < 0)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+/*
* default get_cpuid(): nothing gets recorded
* actual implementation must be in arch/$(ARCH)/util/header.c
*/
@@ -1209,14 +1267,14 @@
size_t msz;
/* number of events */
- ret = read(fd, &nre, sizeof(nre));
+ ret = readn(fd, &nre, sizeof(nre));
if (ret != (ssize_t)sizeof(nre))
goto error;
if (ph->needs_swap)
nre = bswap_32(nre);
- ret = read(fd, &sz, sizeof(sz));
+ ret = readn(fd, &sz, sizeof(sz));
if (ret != (ssize_t)sizeof(sz))
goto error;
@@ -1244,7 +1302,7 @@
* must read entire on-file attr struct to
* sync up with layout.
*/
- ret = read(fd, buf, sz);
+ ret = readn(fd, buf, sz);
if (ret != (ssize_t)sz)
goto error;
@@ -1253,7 +1311,7 @@
memcpy(&evsel->attr, buf, msz);
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != (ssize_t)sizeof(nr))
goto error;
@@ -1274,7 +1332,7 @@
evsel->id = id;
for (j = 0 ; j < nr; j++) {
- ret = read(fd, id, sizeof(*id));
+ ret = readn(fd, id, sizeof(*id));
if (ret != (ssize_t)sizeof(*id))
goto error;
if (ph->needs_swap)
@@ -1435,6 +1493,31 @@
fprintf(fp, "# pmu mappings: unable to read\n");
}
+static void print_group_desc(struct perf_header *ph, int fd __maybe_unused,
+ FILE *fp)
+{
+ struct perf_session *session;
+ struct perf_evsel *evsel;
+ u32 nr = 0;
+
+ session = container_of(ph, struct perf_session, header);
+
+ list_for_each_entry(evsel, &session->evlist->entries, node) {
+ if (perf_evsel__is_group_leader(evsel) &&
+ evsel->nr_members > 1) {
+ fprintf(fp, "# group: %s{%s", evsel->group_name ?: "",
+ perf_evsel__name(evsel));
+
+ nr = evsel->nr_members - 1;
+ } else if (nr) {
+ fprintf(fp, ",%s", perf_evsel__name(evsel));
+
+ if (--nr == 0)
+ fprintf(fp, "}\n");
+ }
+ }
+}
+
static int __event_process_build_id(struct build_id_event *bev,
char *filename,
struct perf_session *session)
@@ -1506,14 +1589,14 @@
while (offset < limit) {
ssize_t len;
- if (read(input, &old_bev, sizeof(old_bev)) != sizeof(old_bev))
+ if (readn(input, &old_bev, sizeof(old_bev)) != sizeof(old_bev))
return -1;
if (header->needs_swap)
perf_event_header__bswap(&old_bev.header);
len = old_bev.header.size - sizeof(old_bev);
- if (read(input, filename, len) != len)
+ if (readn(input, filename, len) != len)
return -1;
bev.header = old_bev.header;
@@ -1548,14 +1631,14 @@
while (offset < limit) {
ssize_t len;
- if (read(input, &bev, sizeof(bev)) != sizeof(bev))
+ if (readn(input, &bev, sizeof(bev)) != sizeof(bev))
goto out;
if (header->needs_swap)
perf_event_header__bswap(&bev.header);
len = bev.header.size - sizeof(bev);
- if (read(input, filename, len) != len)
+ if (readn(input, filename, len) != len)
goto out;
/*
* The a1645ce1 changeset:
@@ -1641,7 +1724,7 @@
size_t ret;
u32 nr;
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
return -1;
@@ -1650,7 +1733,7 @@
ph->env.nr_cpus_online = nr;
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
return -1;
@@ -1684,7 +1767,7 @@
uint64_t mem;
size_t ret;
- ret = read(fd, &mem, sizeof(mem));
+ ret = readn(fd, &mem, sizeof(mem));
if (ret != sizeof(mem))
return -1;
@@ -1756,7 +1839,7 @@
u32 nr, i;
struct strbuf sb;
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
return -1;
@@ -1792,7 +1875,7 @@
char *str;
struct strbuf sb;
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
return -1;
@@ -1813,7 +1896,7 @@
}
ph->env.sibling_cores = strbuf_detach(&sb, NULL);
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
return -1;
@@ -1850,7 +1933,7 @@
struct strbuf sb;
/* nr nodes */
- ret = read(fd, &nr, sizeof(nr));
+ ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
goto error;
@@ -1862,15 +1945,15 @@
for (i = 0; i < nr; i++) {
/* node number */
- ret = read(fd, &node, sizeof(node));
+ ret = readn(fd, &node, sizeof(node));
if (ret != sizeof(node))
goto error;
- ret = read(fd, &mem_total, sizeof(u64));
+ ret = readn(fd, &mem_total, sizeof(u64));
if (ret != sizeof(u64))
goto error;
- ret = read(fd, &mem_free, sizeof(u64));
+ ret = readn(fd, &mem_free, sizeof(u64));
if (ret != sizeof(u64))
goto error;
@@ -1909,7 +1992,7 @@
u32 type;
struct strbuf sb;
- ret = read(fd, &pmu_num, sizeof(pmu_num));
+ ret = readn(fd, &pmu_num, sizeof(pmu_num));
if (ret != sizeof(pmu_num))
return -1;
@@ -1925,7 +2008,7 @@
strbuf_init(&sb, 128);
while (pmu_num) {
- if (read(fd, &type, sizeof(type)) != sizeof(type))
+ if (readn(fd, &type, sizeof(type)) != sizeof(type))
goto error;
if (ph->needs_swap)
type = bswap_32(type);
@@ -1949,6 +2032,98 @@
return -1;
}
+static int process_group_desc(struct perf_file_section *section __maybe_unused,
+ struct perf_header *ph, int fd,
+ void *data __maybe_unused)
+{
+ size_t ret = -1;
+ u32 i, nr, nr_groups;
+ struct perf_session *session;
+ struct perf_evsel *evsel, *leader = NULL;
+ struct group_desc {
+ char *name;
+ u32 leader_idx;
+ u32 nr_members;
+ } *desc;
+
+ if (readn(fd, &nr_groups, sizeof(nr_groups)) != sizeof(nr_groups))
+ return -1;
+
+ if (ph->needs_swap)
+ nr_groups = bswap_32(nr_groups);
+
+ ph->env.nr_groups = nr_groups;
+ if (!nr_groups) {
+ pr_debug("group desc not available\n");
+ return 0;
+ }
+
+ desc = calloc(nr_groups, sizeof(*desc));
+ if (!desc)
+ return -1;
+
+ for (i = 0; i < nr_groups; i++) {
+ desc[i].name = do_read_string(fd, ph);
+ if (!desc[i].name)
+ goto out_free;
+
+ if (readn(fd, &desc[i].leader_idx, sizeof(u32)) != sizeof(u32))
+ goto out_free;
+
+ if (readn(fd, &desc[i].nr_members, sizeof(u32)) != sizeof(u32))
+ goto out_free;
+
+ if (ph->needs_swap) {
+ desc[i].leader_idx = bswap_32(desc[i].leader_idx);
+ desc[i].nr_members = bswap_32(desc[i].nr_members);
+ }
+ }
+
+ /*
+ * Rebuild group relationship based on the group_desc
+ */
+ session = container_of(ph, struct perf_session, header);
+ session->evlist->nr_groups = nr_groups;
+
+ i = nr = 0;
+ list_for_each_entry(evsel, &session->evlist->entries, node) {
+ if (evsel->idx == (int) desc[i].leader_idx) {
+ evsel->leader = evsel;
+ /* {anon_group} is a dummy name */
+ if (strcmp(desc[i].name, "{anon_group}"))
+ evsel->group_name = desc[i].name;
+ evsel->nr_members = desc[i].nr_members;
+
+ if (i >= nr_groups || nr > 0) {
+ pr_debug("invalid group desc\n");
+ goto out_free;
+ }
+
+ leader = evsel;
+ nr = evsel->nr_members - 1;
+ i++;
+ } else if (nr) {
+ /* This is a group member */
+ evsel->leader = leader;
+
+ nr--;
+ }
+ }
+
+ if (i != nr_groups || nr != 0) {
+ pr_debug("invalid group desc\n");
+ goto out_free;
+ }
+
+ ret = 0;
+out_free:
+ while ((int) --i >= 0)
+ free(desc[i].name);
+ free(desc);
+
+ return ret;
+}
+
struct feature_ops {
int (*write)(int fd, struct perf_header *h, struct perf_evlist *evlist);
void (*print)(struct perf_header *h, int fd, FILE *fp);
@@ -1988,6 +2163,7 @@
FEAT_OPF(HEADER_NUMA_TOPOLOGY, numa_topology),
FEAT_OPA(HEADER_BRANCH_STACK, branch_stack),
FEAT_OPP(HEADER_PMU_MAPPINGS, pmu_mappings),
+ FEAT_OPP(HEADER_GROUP_DESC, group_desc),
};
struct header_print_data {
@@ -2077,7 +2253,7 @@
if (!nr_sections)
return 0;
- feat_sec = p = calloc(sizeof(*feat_sec), nr_sections);
+ feat_sec = p = calloc(nr_sections, sizeof(*feat_sec));
if (feat_sec == NULL)
return -ENOMEM;
@@ -2249,7 +2425,7 @@
if (!nr_sections)
return 0;
- feat_sec = sec = calloc(sizeof(*feat_sec), nr_sections);
+ feat_sec = sec = calloc(nr_sections, sizeof(*feat_sec));
if (!feat_sec)
return -1;
@@ -2912,16 +3088,22 @@
session->repipe);
padding = PERF_ALIGN(size_read, sizeof(u64)) - size_read;
- if (read(session->fd, buf, padding) < 0)
- die("reading input file");
+ if (readn(session->fd, buf, padding) < 0) {
+ pr_err("%s: reading input file", __func__);
+ return -1;
+ }
if (session->repipe) {
int retw = write(STDOUT_FILENO, buf, padding);
- if (retw <= 0 || retw != padding)
- die("repiping tracing data padding");
+ if (retw <= 0 || retw != padding) {
+ pr_err("%s: repiping tracing data padding", __func__);
+ return -1;
+ }
}
- if (size_read + padding != size)
- die("tracing data size mismatch");
+ if (size_read + padding != size) {
+ pr_err("%s: tracing data size mismatch", __func__);
+ return -1;
+ }
perf_evlist__prepare_tracepoint_events(session->evlist,
session->pevent);
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index 20f0344..c9fc55c 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -29,6 +29,7 @@
HEADER_NUMA_TOPOLOGY,
HEADER_BRANCH_STACK,
HEADER_PMU_MAPPINGS,
+ HEADER_GROUP_DESC,
HEADER_LAST_FEATURE,
HEADER_FEAT_BITS = 256,
};
@@ -79,6 +80,7 @@
char *numa_nodes;
int nr_pmu_mappings;
char *pmu_mappings;
+ int nr_groups;
};
struct perf_header {
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index cb17e2a..f855941 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -4,6 +4,7 @@
#include "hist.h"
#include "session.h"
#include "sort.h"
+#include "evsel.h"
#include <math.h>
static bool hists__filter_entry_by_dso(struct hists *hists,
@@ -82,6 +83,9 @@
hists__new_col_len(hists, HISTC_DSO, len);
}
+ if (h->parent)
+ hists__new_col_len(hists, HISTC_PARENT, h->parent->namelen);
+
if (h->branch_info) {
int symlen;
/*
@@ -242,6 +246,14 @@
if (he->ms.map)
he->ms.map->referenced = true;
+
+ if (he->branch_info) {
+ if (he->branch_info->from.map)
+ he->branch_info->from.map->referenced = true;
+ if (he->branch_info->to.map)
+ he->branch_info->to.map->referenced = true;
+ }
+
if (symbol_conf.use_callchain)
callchain_init(he->callchain);
@@ -251,7 +263,7 @@
return he;
}
-static void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h)
+void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h)
{
if (!h->filtered) {
hists__calc_col_len(hists, h);
@@ -285,7 +297,13 @@
parent = *p;
he = rb_entry(parent, struct hist_entry, rb_node_in);
- cmp = hist_entry__cmp(entry, he);
+ /*
+ * Make sure that it receives arguments in a same order as
+ * hist_entry__collapse() so that we can use an appropriate
+ * function when searching an entry regardless which sort
+ * keys were used.
+ */
+ cmp = hist_entry__cmp(he, entry);
if (!cmp) {
he_stat__add_period(&he->stat, period);
@@ -523,6 +541,62 @@
* reverse the map, sort on period.
*/
+static int period_cmp(u64 period_a, u64 period_b)
+{
+ if (period_a > period_b)
+ return 1;
+ if (period_a < period_b)
+ return -1;
+ return 0;
+}
+
+static int hist_entry__sort_on_period(struct hist_entry *a,
+ struct hist_entry *b)
+{
+ int ret;
+ int i, nr_members;
+ struct perf_evsel *evsel;
+ struct hist_entry *pair;
+ u64 *periods_a, *periods_b;
+
+ ret = period_cmp(a->stat.period, b->stat.period);
+ if (ret || !symbol_conf.event_group)
+ return ret;
+
+ evsel = hists_to_evsel(a->hists);
+ nr_members = evsel->nr_members;
+ if (nr_members <= 1)
+ return ret;
+
+ periods_a = zalloc(sizeof(periods_a) * nr_members);
+ periods_b = zalloc(sizeof(periods_b) * nr_members);
+
+ if (!periods_a || !periods_b)
+ goto out;
+
+ list_for_each_entry(pair, &a->pairs.head, pairs.node) {
+ evsel = hists_to_evsel(pair->hists);
+ periods_a[perf_evsel__group_idx(evsel)] = pair->stat.period;
+ }
+
+ list_for_each_entry(pair, &b->pairs.head, pairs.node) {
+ evsel = hists_to_evsel(pair->hists);
+ periods_b[perf_evsel__group_idx(evsel)] = pair->stat.period;
+ }
+
+ for (i = 1; i < nr_members; i++) {
+ ret = period_cmp(periods_a[i], periods_b[i]);
+ if (ret)
+ break;
+ }
+
+out:
+ free(periods_a);
+ free(periods_b);
+
+ return ret;
+}
+
static void __hists__insert_output_entry(struct rb_root *entries,
struct hist_entry *he,
u64 min_callchain_hits)
@@ -539,7 +613,7 @@
parent = *p;
iter = rb_entry(parent, struct hist_entry, rb_node);
- if (he->stat.period > iter->stat.period)
+ if (hist_entry__sort_on_period(he, iter) > 0)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
@@ -711,25 +785,38 @@
return symbol__annotate(he->ms.sym, he->ms.map, privsize);
}
+void events_stats__inc(struct events_stats *stats, u32 type)
+{
+ ++stats->nr_events[0];
+ ++stats->nr_events[type];
+}
+
void hists__inc_nr_events(struct hists *hists, u32 type)
{
- ++hists->stats.nr_events[0];
- ++hists->stats.nr_events[type];
+ events_stats__inc(&hists->stats, type);
}
static struct hist_entry *hists__add_dummy_entry(struct hists *hists,
struct hist_entry *pair)
{
- struct rb_node **p = &hists->entries.rb_node;
+ struct rb_root *root;
+ struct rb_node **p;
struct rb_node *parent = NULL;
struct hist_entry *he;
int cmp;
+ if (sort__need_collapse)
+ root = &hists->entries_collapsed;
+ else
+ root = hists->entries_in;
+
+ p = &root->rb_node;
+
while (*p != NULL) {
parent = *p;
- he = rb_entry(parent, struct hist_entry, rb_node);
+ he = rb_entry(parent, struct hist_entry, rb_node_in);
- cmp = hist_entry__cmp(pair, he);
+ cmp = hist_entry__collapse(he, pair);
if (!cmp)
goto out;
@@ -744,8 +831,8 @@
if (he) {
memset(&he->stat, 0, sizeof(he->stat));
he->hists = hists;
- rb_link_node(&he->rb_node, parent, p);
- rb_insert_color(&he->rb_node, &hists->entries);
+ rb_link_node(&he->rb_node_in, parent, p);
+ rb_insert_color(&he->rb_node_in, root);
hists__inc_nr_entries(hists, he);
}
out:
@@ -755,11 +842,16 @@
static struct hist_entry *hists__find_entry(struct hists *hists,
struct hist_entry *he)
{
- struct rb_node *n = hists->entries.rb_node;
+ struct rb_node *n;
+
+ if (sort__need_collapse)
+ n = hists->entries_collapsed.rb_node;
+ else
+ n = hists->entries_in->rb_node;
while (n) {
- struct hist_entry *iter = rb_entry(n, struct hist_entry, rb_node);
- int64_t cmp = hist_entry__cmp(he, iter);
+ struct hist_entry *iter = rb_entry(n, struct hist_entry, rb_node_in);
+ int64_t cmp = hist_entry__collapse(iter, he);
if (cmp < 0)
n = n->rb_left;
@@ -777,15 +869,21 @@
*/
void hists__match(struct hists *leader, struct hists *other)
{
+ struct rb_root *root;
struct rb_node *nd;
struct hist_entry *pos, *pair;
- for (nd = rb_first(&leader->entries); nd; nd = rb_next(nd)) {
- pos = rb_entry(nd, struct hist_entry, rb_node);
+ if (sort__need_collapse)
+ root = &leader->entries_collapsed;
+ else
+ root = leader->entries_in;
+
+ for (nd = rb_first(root); nd; nd = rb_next(nd)) {
+ pos = rb_entry(nd, struct hist_entry, rb_node_in);
pair = hists__find_entry(other, pos);
if (pair)
- hist__entry_add_pair(pos, pair);
+ hist_entry__add_pair(pair, pos);
}
}
@@ -796,17 +894,23 @@
*/
int hists__link(struct hists *leader, struct hists *other)
{
+ struct rb_root *root;
struct rb_node *nd;
struct hist_entry *pos, *pair;
- for (nd = rb_first(&other->entries); nd; nd = rb_next(nd)) {
- pos = rb_entry(nd, struct hist_entry, rb_node);
+ if (sort__need_collapse)
+ root = &other->entries_collapsed;
+ else
+ root = other->entries_in;
+
+ for (nd = rb_first(root); nd; nd = rb_next(nd)) {
+ pos = rb_entry(nd, struct hist_entry, rb_node_in);
if (!hist_entry__has_pairs(pos)) {
pair = hists__add_dummy_entry(leader, pos);
if (pair == NULL)
return -1;
- hist__entry_add_pair(pair, pos);
+ hist_entry__add_pair(pos, pair);
}
}
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 8b091a5..3862468 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -96,8 +96,10 @@
bool zap_kernel);
void hists__output_recalc_col_len(struct hists *hists, int max_rows);
+void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h);
void hists__inc_nr_events(struct hists *self, u32 type);
-size_t hists__fprintf_nr_events(struct hists *self, FILE *fp);
+void events_stats__inc(struct events_stats *stats, u32 type);
+size_t events_stats__fprintf(struct events_stats *stats, FILE *fp);
size_t hists__fprintf(struct hists *self, bool show_header, int max_rows,
int max_cols, FILE *fp);
@@ -126,13 +128,19 @@
};
struct perf_hpp_fmt {
- bool cond;
int (*header)(struct perf_hpp *hpp);
int (*width)(struct perf_hpp *hpp);
int (*color)(struct perf_hpp *hpp, struct hist_entry *he);
int (*entry)(struct perf_hpp *hpp, struct hist_entry *he);
+
+ struct list_head list;
};
+extern struct list_head perf_hpp__list;
+
+#define perf_hpp__for_each_format(format) \
+ list_for_each_entry(format, &perf_hpp__list, list)
+
extern struct perf_hpp_fmt perf_hpp__format[];
enum {
@@ -148,14 +156,14 @@
PERF_HPP__DELTA,
PERF_HPP__RATIO,
PERF_HPP__WEIGHTED_DIFF,
- PERF_HPP__DISPL,
PERF_HPP__FORMULA,
PERF_HPP__MAX_INDEX
};
void perf_hpp__init(void);
-void perf_hpp__column_enable(unsigned col, bool enable);
+void perf_hpp__column_register(struct perf_hpp_fmt *format);
+void perf_hpp__column_enable(unsigned col);
int hist_entry__period_snprintf(struct perf_hpp *hpp, struct hist_entry *he,
bool color);
@@ -219,8 +227,10 @@
unsigned int hists__sort_list_width(struct hists *self);
-double perf_diff__compute_delta(struct hist_entry *he);
-double perf_diff__compute_ratio(struct hist_entry *he);
-s64 perf_diff__compute_wdiff(struct hist_entry *he);
-int perf_diff__formula(char *buf, size_t size, struct hist_entry *he);
+double perf_diff__compute_delta(struct hist_entry *he, struct hist_entry *pair);
+double perf_diff__compute_ratio(struct hist_entry *he, struct hist_entry *pair);
+s64 perf_diff__compute_wdiff(struct hist_entry *he, struct hist_entry *pair);
+int perf_diff__formula(struct hist_entry *he, struct hist_entry *pair,
+ char *buf, size_t size);
+double perf_diff__period_percent(struct hist_entry *he, u64 period);
#endif /* __PERF_HIST_H */
diff --git a/tools/perf/util/include/linux/bitops.h b/tools/perf/util/include/linux/bitops.h
index a55d8cf0..45cf10a 100644
--- a/tools/perf/util/include/linux/bitops.h
+++ b/tools/perf/util/include/linux/bitops.h
@@ -14,6 +14,7 @@
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
+#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE)
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
diff --git a/tools/perf/util/intlist.c b/tools/perf/util/intlist.c
index 9d07400..11a8d86 100644
--- a/tools/perf/util/intlist.c
+++ b/tools/perf/util/intlist.c
@@ -59,16 +59,40 @@
struct int_node *intlist__find(struct intlist *ilist, int i)
{
- struct int_node *node = NULL;
- struct rb_node *rb_node = rblist__find(&ilist->rblist, (void *)((long)i));
+ struct int_node *node;
+ struct rb_node *rb_node;
+ if (ilist == NULL)
+ return NULL;
+
+ node = NULL;
+ rb_node = rblist__find(&ilist->rblist, (void *)((long)i));
if (rb_node)
node = container_of(rb_node, struct int_node, rb_node);
return node;
}
-struct intlist *intlist__new(void)
+static int intlist__parse_list(struct intlist *ilist, const char *s)
+{
+ char *sep;
+ int err;
+
+ do {
+ long value = strtol(s, &sep, 10);
+ err = -EINVAL;
+ if (*sep != ',' && *sep != '\0')
+ break;
+ err = intlist__add(ilist, value);
+ if (err)
+ break;
+ s = sep + 1;
+ } while (*sep != '\0');
+
+ return err;
+}
+
+struct intlist *intlist__new(const char *slist)
{
struct intlist *ilist = malloc(sizeof(*ilist));
@@ -77,9 +101,15 @@
ilist->rblist.node_cmp = intlist__node_cmp;
ilist->rblist.node_new = intlist__node_new;
ilist->rblist.node_delete = intlist__node_delete;
+
+ if (slist && intlist__parse_list(ilist, slist))
+ goto out_delete;
}
return ilist;
+out_delete:
+ intlist__delete(ilist);
+ return NULL;
}
void intlist__delete(struct intlist *ilist)
diff --git a/tools/perf/util/intlist.h b/tools/perf/util/intlist.h
index 6d63ab9..62351da 100644
--- a/tools/perf/util/intlist.h
+++ b/tools/perf/util/intlist.h
@@ -15,7 +15,7 @@
struct rblist rblist;
};
-struct intlist *intlist__new(void);
+struct intlist *intlist__new(const char *slist);
void intlist__delete(struct intlist *ilist);
void intlist__remove(struct intlist *ilist, struct int_node *in);
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 1f09d05..efdb38e 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1,10 +1,15 @@
+#include "callchain.h"
#include "debug.h"
#include "event.h"
+#include "evsel.h"
+#include "hist.h"
#include "machine.h"
#include "map.h"
+#include "sort.h"
#include "strlist.h"
#include "thread.h"
#include <stdbool.h>
+#include "unwind.h"
int machine__init(struct machine *machine, const char *root_dir, pid_t pid)
{
@@ -48,6 +53,29 @@
}
}
+void machine__delete_dead_threads(struct machine *machine)
+{
+ struct thread *n, *t;
+
+ list_for_each_entry_safe(t, n, &machine->dead_threads, node) {
+ list_del(&t->node);
+ thread__delete(t);
+ }
+}
+
+void machine__delete_threads(struct machine *machine)
+{
+ struct rb_node *nd = rb_first(&machine->threads);
+
+ while (nd) {
+ struct thread *t = rb_entry(nd, struct thread, rb_node);
+
+ rb_erase(&t->rb_node, &machine->threads);
+ nd = rb_next(nd);
+ thread__delete(t);
+ }
+}
+
void machine__exit(struct machine *machine)
{
map_groups__exit(&machine->kmaps);
@@ -63,10 +91,22 @@
free(machine);
}
-struct machine *machines__add(struct rb_root *machines, pid_t pid,
+void machines__init(struct machines *machines)
+{
+ machine__init(&machines->host, "", HOST_KERNEL_ID);
+ machines->guests = RB_ROOT;
+}
+
+void machines__exit(struct machines *machines)
+{
+ machine__exit(&machines->host);
+ /* XXX exit guest */
+}
+
+struct machine *machines__add(struct machines *machines, pid_t pid,
const char *root_dir)
{
- struct rb_node **p = &machines->rb_node;
+ struct rb_node **p = &machines->guests.rb_node;
struct rb_node *parent = NULL;
struct machine *pos, *machine = malloc(sizeof(*machine));
@@ -88,18 +128,21 @@
}
rb_link_node(&machine->rb_node, parent, p);
- rb_insert_color(&machine->rb_node, machines);
+ rb_insert_color(&machine->rb_node, &machines->guests);
return machine;
}
-struct machine *machines__find(struct rb_root *machines, pid_t pid)
+struct machine *machines__find(struct machines *machines, pid_t pid)
{
- struct rb_node **p = &machines->rb_node;
+ struct rb_node **p = &machines->guests.rb_node;
struct rb_node *parent = NULL;
struct machine *machine;
struct machine *default_machine = NULL;
+ if (pid == HOST_KERNEL_ID)
+ return &machines->host;
+
while (*p != NULL) {
parent = *p;
machine = rb_entry(parent, struct machine, rb_node);
@@ -116,7 +159,7 @@
return default_machine;
}
-struct machine *machines__findnew(struct rb_root *machines, pid_t pid)
+struct machine *machines__findnew(struct machines *machines, pid_t pid)
{
char path[PATH_MAX];
const char *root_dir = "";
@@ -150,12 +193,12 @@
return machine;
}
-void machines__process(struct rb_root *machines,
- machine__process_t process, void *data)
+void machines__process_guests(struct machines *machines,
+ machine__process_t process, void *data)
{
struct rb_node *nd;
- for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
process(pos, data);
}
@@ -175,12 +218,14 @@
return bf;
}
-void machines__set_id_hdr_size(struct rb_root *machines, u16 id_hdr_size)
+void machines__set_id_hdr_size(struct machines *machines, u16 id_hdr_size)
{
struct rb_node *node;
struct machine *machine;
- for (node = rb_first(machines); node; node = rb_next(node)) {
+ machines->host.id_hdr_size = id_hdr_size;
+
+ for (node = rb_first(&machines->guests); node; node = rb_next(node)) {
machine = rb_entry(node, struct machine, rb_node);
machine->id_hdr_size = id_hdr_size;
}
@@ -264,6 +309,537 @@
return 0;
}
+struct map *machine__new_module(struct machine *machine, u64 start,
+ const char *filename)
+{
+ struct map *map;
+ struct dso *dso = __dsos__findnew(&machine->kernel_dsos, filename);
+
+ if (dso == NULL)
+ return NULL;
+
+ map = map__new2(start, dso, MAP__FUNCTION);
+ if (map == NULL)
+ return NULL;
+
+ if (machine__is_host(machine))
+ dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE;
+ else
+ dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE;
+ map_groups__insert(&machine->kmaps, map);
+ return map;
+}
+
+size_t machines__fprintf_dsos(struct machines *machines, FILE *fp)
+{
+ struct rb_node *nd;
+ size_t ret = __dsos__fprintf(&machines->host.kernel_dsos, fp) +
+ __dsos__fprintf(&machines->host.user_dsos, fp);
+
+ for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+ ret += __dsos__fprintf(&pos->kernel_dsos, fp);
+ ret += __dsos__fprintf(&pos->user_dsos, fp);
+ }
+
+ return ret;
+}
+
+size_t machine__fprintf_dsos_buildid(struct machine *machine, FILE *fp,
+ bool (skip)(struct dso *dso, int parm), int parm)
+{
+ return __dsos__fprintf_buildid(&machine->kernel_dsos, fp, skip, parm) +
+ __dsos__fprintf_buildid(&machine->user_dsos, fp, skip, parm);
+}
+
+size_t machines__fprintf_dsos_buildid(struct machines *machines, FILE *fp,
+ bool (skip)(struct dso *dso, int parm), int parm)
+{
+ struct rb_node *nd;
+ size_t ret = machine__fprintf_dsos_buildid(&machines->host, fp, skip, parm);
+
+ for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+ ret += machine__fprintf_dsos_buildid(pos, fp, skip, parm);
+ }
+ return ret;
+}
+
+size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp)
+{
+ int i;
+ size_t printed = 0;
+ struct dso *kdso = machine->vmlinux_maps[MAP__FUNCTION]->dso;
+
+ if (kdso->has_build_id) {
+ char filename[PATH_MAX];
+ if (dso__build_id_filename(kdso, filename, sizeof(filename)))
+ printed += fprintf(fp, "[0] %s\n", filename);
+ }
+
+ for (i = 0; i < vmlinux_path__nr_entries; ++i)
+ printed += fprintf(fp, "[%d] %s\n",
+ i + kdso->has_build_id, vmlinux_path[i]);
+
+ return printed;
+}
+
+size_t machine__fprintf(struct machine *machine, FILE *fp)
+{
+ size_t ret = 0;
+ struct rb_node *nd;
+
+ for (nd = rb_first(&machine->threads); nd; nd = rb_next(nd)) {
+ struct thread *pos = rb_entry(nd, struct thread, rb_node);
+
+ ret += thread__fprintf(pos, fp);
+ }
+
+ return ret;
+}
+
+static struct dso *machine__get_kernel(struct machine *machine)
+{
+ const char *vmlinux_name = NULL;
+ struct dso *kernel;
+
+ if (machine__is_host(machine)) {
+ vmlinux_name = symbol_conf.vmlinux_name;
+ if (!vmlinux_name)
+ vmlinux_name = "[kernel.kallsyms]";
+
+ kernel = dso__kernel_findnew(machine, vmlinux_name,
+ "[kernel]",
+ DSO_TYPE_KERNEL);
+ } else {
+ char bf[PATH_MAX];
+
+ if (machine__is_default_guest(machine))
+ vmlinux_name = symbol_conf.default_guest_vmlinux_name;
+ if (!vmlinux_name)
+ vmlinux_name = machine__mmap_name(machine, bf,
+ sizeof(bf));
+
+ kernel = dso__kernel_findnew(machine, vmlinux_name,
+ "[guest.kernel]",
+ DSO_TYPE_GUEST_KERNEL);
+ }
+
+ if (kernel != NULL && (!kernel->has_build_id))
+ dso__read_running_kernel_build_id(kernel, machine);
+
+ return kernel;
+}
+
+struct process_args {
+ u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+ char type __maybe_unused, u64 start)
+{
+ struct process_args *args = arg;
+
+ if (strchr(name, '['))
+ return 0;
+
+ args->start = start;
+ return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+ const char *filename;
+ char path[PATH_MAX];
+ struct process_args args;
+
+ if (machine__is_host(machine)) {
+ filename = "/proc/kallsyms";
+ } else {
+ if (machine__is_default_guest(machine))
+ filename = (char *)symbol_conf.default_guest_kallsyms;
+ else {
+ sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+ filename = path;
+ }
+ }
+
+ if (symbol__restricted_filename(filename, "/proc/kallsyms"))
+ return 0;
+
+ if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+ return 0;
+
+ return args.start;
+}
+
+int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
+{
+ enum map_type type;
+ u64 start = machine__get_kernel_start_addr(machine);
+
+ for (type = 0; type < MAP__NR_TYPES; ++type) {
+ struct kmap *kmap;
+
+ machine->vmlinux_maps[type] = map__new2(start, kernel, type);
+ if (machine->vmlinux_maps[type] == NULL)
+ return -1;
+
+ machine->vmlinux_maps[type]->map_ip =
+ machine->vmlinux_maps[type]->unmap_ip =
+ identity__map_ip;
+ kmap = map__kmap(machine->vmlinux_maps[type]);
+ kmap->kmaps = &machine->kmaps;
+ map_groups__insert(&machine->kmaps,
+ machine->vmlinux_maps[type]);
+ }
+
+ return 0;
+}
+
+void machine__destroy_kernel_maps(struct machine *machine)
+{
+ enum map_type type;
+
+ for (type = 0; type < MAP__NR_TYPES; ++type) {
+ struct kmap *kmap;
+
+ if (machine->vmlinux_maps[type] == NULL)
+ continue;
+
+ kmap = map__kmap(machine->vmlinux_maps[type]);
+ map_groups__remove(&machine->kmaps,
+ machine->vmlinux_maps[type]);
+ if (kmap->ref_reloc_sym) {
+ /*
+ * ref_reloc_sym is shared among all maps, so free just
+ * on one of them.
+ */
+ if (type == MAP__FUNCTION) {
+ free((char *)kmap->ref_reloc_sym->name);
+ kmap->ref_reloc_sym->name = NULL;
+ free(kmap->ref_reloc_sym);
+ }
+ kmap->ref_reloc_sym = NULL;
+ }
+
+ map__delete(machine->vmlinux_maps[type]);
+ machine->vmlinux_maps[type] = NULL;
+ }
+}
+
+int machines__create_guest_kernel_maps(struct machines *machines)
+{
+ int ret = 0;
+ struct dirent **namelist = NULL;
+ int i, items = 0;
+ char path[PATH_MAX];
+ pid_t pid;
+ char *endp;
+
+ if (symbol_conf.default_guest_vmlinux_name ||
+ symbol_conf.default_guest_modules ||
+ symbol_conf.default_guest_kallsyms) {
+ machines__create_kernel_maps(machines, DEFAULT_GUEST_KERNEL_ID);
+ }
+
+ if (symbol_conf.guestmount) {
+ items = scandir(symbol_conf.guestmount, &namelist, NULL, NULL);
+ if (items <= 0)
+ return -ENOENT;
+ for (i = 0; i < items; i++) {
+ if (!isdigit(namelist[i]->d_name[0])) {
+ /* Filter out . and .. */
+ continue;
+ }
+ pid = (pid_t)strtol(namelist[i]->d_name, &endp, 10);
+ if ((*endp != '\0') ||
+ (endp == namelist[i]->d_name) ||
+ (errno == ERANGE)) {
+ pr_debug("invalid directory (%s). Skipping.\n",
+ namelist[i]->d_name);
+ continue;
+ }
+ sprintf(path, "%s/%s/proc/kallsyms",
+ symbol_conf.guestmount,
+ namelist[i]->d_name);
+ ret = access(path, R_OK);
+ if (ret) {
+ pr_debug("Can't access file %s\n", path);
+ goto failure;
+ }
+ machines__create_kernel_maps(machines, pid);
+ }
+failure:
+ free(namelist);
+ }
+
+ return ret;
+}
+
+void machines__destroy_kernel_maps(struct machines *machines)
+{
+ struct rb_node *next = rb_first(&machines->guests);
+
+ machine__destroy_kernel_maps(&machines->host);
+
+ while (next) {
+ struct machine *pos = rb_entry(next, struct machine, rb_node);
+
+ next = rb_next(&pos->rb_node);
+ rb_erase(&pos->rb_node, &machines->guests);
+ machine__delete(pos);
+ }
+}
+
+int machines__create_kernel_maps(struct machines *machines, pid_t pid)
+{
+ struct machine *machine = machines__findnew(machines, pid);
+
+ if (machine == NULL)
+ return -1;
+
+ return machine__create_kernel_maps(machine);
+}
+
+int machine__load_kallsyms(struct machine *machine, const char *filename,
+ enum map_type type, symbol_filter_t filter)
+{
+ struct map *map = machine->vmlinux_maps[type];
+ int ret = dso__load_kallsyms(map->dso, filename, map, filter);
+
+ if (ret > 0) {
+ dso__set_loaded(map->dso, type);
+ /*
+ * Since /proc/kallsyms will have multiple sessions for the
+ * kernel, with modules between them, fixup the end of all
+ * sections.
+ */
+ __map_groups__fixup_end(&machine->kmaps, type);
+ }
+
+ return ret;
+}
+
+int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
+ symbol_filter_t filter)
+{
+ struct map *map = machine->vmlinux_maps[type];
+ int ret = dso__load_vmlinux_path(map->dso, map, filter);
+
+ if (ret > 0) {
+ dso__set_loaded(map->dso, type);
+ map__reloc_vmlinux(map);
+ }
+
+ return ret;
+}
+
+static void map_groups__fixup_end(struct map_groups *mg)
+{
+ int i;
+ for (i = 0; i < MAP__NR_TYPES; ++i)
+ __map_groups__fixup_end(mg, i);
+}
+
+static char *get_kernel_version(const char *root_dir)
+{
+ char version[PATH_MAX];
+ FILE *file;
+ char *name, *tmp;
+ const char *prefix = "Linux version ";
+
+ sprintf(version, "%s/proc/version", root_dir);
+ file = fopen(version, "r");
+ if (!file)
+ return NULL;
+
+ version[0] = '\0';
+ tmp = fgets(version, sizeof(version), file);
+ fclose(file);
+
+ name = strstr(version, prefix);
+ if (!name)
+ return NULL;
+ name += strlen(prefix);
+ tmp = strchr(name, ' ');
+ if (tmp)
+ *tmp = '\0';
+
+ return strdup(name);
+}
+
+static int map_groups__set_modules_path_dir(struct map_groups *mg,
+ const char *dir_name)
+{
+ struct dirent *dent;
+ DIR *dir = opendir(dir_name);
+ int ret = 0;
+
+ if (!dir) {
+ pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
+ return -1;
+ }
+
+ while ((dent = readdir(dir)) != NULL) {
+ char path[PATH_MAX];
+ struct stat st;
+
+ /*sshfs might return bad dent->d_type, so we have to stat*/
+ snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
+ if (stat(path, &st))
+ continue;
+
+ if (S_ISDIR(st.st_mode)) {
+ if (!strcmp(dent->d_name, ".") ||
+ !strcmp(dent->d_name, ".."))
+ continue;
+
+ ret = map_groups__set_modules_path_dir(mg, path);
+ if (ret < 0)
+ goto out;
+ } else {
+ char *dot = strrchr(dent->d_name, '.'),
+ dso_name[PATH_MAX];
+ struct map *map;
+ char *long_name;
+
+ if (dot == NULL || strcmp(dot, ".ko"))
+ continue;
+ snprintf(dso_name, sizeof(dso_name), "[%.*s]",
+ (int)(dot - dent->d_name), dent->d_name);
+
+ strxfrchar(dso_name, '-', '_');
+ map = map_groups__find_by_name(mg, MAP__FUNCTION,
+ dso_name);
+ if (map == NULL)
+ continue;
+
+ long_name = strdup(path);
+ if (long_name == NULL) {
+ ret = -1;
+ goto out;
+ }
+ dso__set_long_name(map->dso, long_name);
+ map->dso->lname_alloc = 1;
+ dso__kernel_module_get_build_id(map->dso, "");
+ }
+ }
+
+out:
+ closedir(dir);
+ return ret;
+}
+
+static int machine__set_modules_path(struct machine *machine)
+{
+ char *version;
+ char modules_path[PATH_MAX];
+
+ version = get_kernel_version(machine->root_dir);
+ if (!version)
+ return -1;
+
+ snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s/kernel",
+ machine->root_dir, version);
+ free(version);
+
+ return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
+}
+
+static int machine__create_modules(struct machine *machine)
+{
+ char *line = NULL;
+ size_t n;
+ FILE *file;
+ struct map *map;
+ const char *modules;
+ char path[PATH_MAX];
+
+ if (machine__is_default_guest(machine))
+ modules = symbol_conf.default_guest_modules;
+ else {
+ sprintf(path, "%s/proc/modules", machine->root_dir);
+ modules = path;
+ }
+
+ if (symbol__restricted_filename(path, "/proc/modules"))
+ return -1;
+
+ file = fopen(modules, "r");
+ if (file == NULL)
+ return -1;
+
+ while (!feof(file)) {
+ char name[PATH_MAX];
+ u64 start;
+ char *sep;
+ int line_len;
+
+ line_len = getline(&line, &n, file);
+ if (line_len < 0)
+ break;
+
+ if (!line)
+ goto out_failure;
+
+ line[--line_len] = '\0'; /* \n */
+
+ sep = strrchr(line, 'x');
+ if (sep == NULL)
+ continue;
+
+ hex2u64(sep + 1, &start);
+
+ sep = strchr(line, ' ');
+ if (sep == NULL)
+ continue;
+
+ *sep = '\0';
+
+ snprintf(name, sizeof(name), "[%s]", line);
+ map = machine__new_module(machine, start, name);
+ if (map == NULL)
+ goto out_delete_line;
+ dso__kernel_module_get_build_id(map->dso, machine->root_dir);
+ }
+
+ free(line);
+ fclose(file);
+
+ return machine__set_modules_path(machine);
+
+out_delete_line:
+ free(line);
+out_failure:
+ return -1;
+}
+
+int machine__create_kernel_maps(struct machine *machine)
+{
+ struct dso *kernel = machine__get_kernel(machine);
+
+ if (kernel == NULL ||
+ __machine__create_kernel_maps(machine, kernel) < 0)
+ return -1;
+
+ if (symbol_conf.use_modules && machine__create_modules(machine) < 0) {
+ if (machine__is_host(machine))
+ pr_debug("Problems creating module maps, "
+ "continuing anyway...\n");
+ else
+ pr_debug("Problems creating module maps for guest %d, "
+ "continuing anyway...\n", machine->pid);
+ }
+
+ /*
+ * Now that we have all the maps created, just set the ->end of them:
+ */
+ map_groups__fixup_end(&machine->kmaps);
+ return 0;
+}
+
static void machine__set_kernel_mmap_len(struct machine *machine,
union perf_event *event)
{
@@ -462,3 +1038,189 @@
return ret;
}
+
+void machine__remove_thread(struct machine *machine, struct thread *th)
+{
+ machine->last_match = NULL;
+ rb_erase(&th->rb_node, &machine->threads);
+ /*
+ * We may have references to this thread, for instance in some hist_entry
+ * instances, so just move them to a separate list.
+ */
+ list_add_tail(&th->node, &machine->dead_threads);
+}
+
+static bool symbol__match_parent_regex(struct symbol *sym)
+{
+ if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
+ return 1;
+
+ return 0;
+}
+
+static const u8 cpumodes[] = {
+ PERF_RECORD_MISC_USER,
+ PERF_RECORD_MISC_KERNEL,
+ PERF_RECORD_MISC_GUEST_USER,
+ PERF_RECORD_MISC_GUEST_KERNEL
+};
+#define NCPUMODES (sizeof(cpumodes)/sizeof(u8))
+
+static void ip__resolve_ams(struct machine *machine, struct thread *thread,
+ struct addr_map_symbol *ams,
+ u64 ip)
+{
+ struct addr_location al;
+ size_t i;
+ u8 m;
+
+ memset(&al, 0, sizeof(al));
+
+ for (i = 0; i < NCPUMODES; i++) {
+ m = cpumodes[i];
+ /*
+ * We cannot use the header.misc hint to determine whether a
+ * branch stack address is user, kernel, guest, hypervisor.
+ * Branches may straddle the kernel/user/hypervisor boundaries.
+ * Thus, we have to try consecutively until we find a match
+ * or else, the symbol is unknown
+ */
+ thread__find_addr_location(thread, machine, m, MAP__FUNCTION,
+ ip, &al, NULL);
+ if (al.sym)
+ goto found;
+ }
+found:
+ ams->addr = ip;
+ ams->al_addr = al.addr;
+ ams->sym = al.sym;
+ ams->map = al.map;
+}
+
+struct branch_info *machine__resolve_bstack(struct machine *machine,
+ struct thread *thr,
+ struct branch_stack *bs)
+{
+ struct branch_info *bi;
+ unsigned int i;
+
+ bi = calloc(bs->nr, sizeof(struct branch_info));
+ if (!bi)
+ return NULL;
+
+ for (i = 0; i < bs->nr; i++) {
+ ip__resolve_ams(machine, thr, &bi[i].to, bs->entries[i].to);
+ ip__resolve_ams(machine, thr, &bi[i].from, bs->entries[i].from);
+ bi[i].flags = bs->entries[i].flags;
+ }
+ return bi;
+}
+
+static int machine__resolve_callchain_sample(struct machine *machine,
+ struct thread *thread,
+ struct ip_callchain *chain,
+ struct symbol **parent)
+
+{
+ u8 cpumode = PERF_RECORD_MISC_USER;
+ unsigned int i;
+ int err;
+
+ callchain_cursor_reset(&callchain_cursor);
+
+ if (chain->nr > PERF_MAX_STACK_DEPTH) {
+ pr_warning("corrupted callchain. skipping...\n");
+ return 0;
+ }
+
+ for (i = 0; i < chain->nr; i++) {
+ u64 ip;
+ struct addr_location al;
+
+ if (callchain_param.order == ORDER_CALLEE)
+ ip = chain->ips[i];
+ else
+ ip = chain->ips[chain->nr - i - 1];
+
+ if (ip >= PERF_CONTEXT_MAX) {
+ switch (ip) {
+ case PERF_CONTEXT_HV:
+ cpumode = PERF_RECORD_MISC_HYPERVISOR;
+ break;
+ case PERF_CONTEXT_KERNEL:
+ cpumode = PERF_RECORD_MISC_KERNEL;
+ break;
+ case PERF_CONTEXT_USER:
+ cpumode = PERF_RECORD_MISC_USER;
+ break;
+ default:
+ pr_debug("invalid callchain context: "
+ "%"PRId64"\n", (s64) ip);
+ /*
+ * It seems the callchain is corrupted.
+ * Discard all.
+ */
+ callchain_cursor_reset(&callchain_cursor);
+ return 0;
+ }
+ continue;
+ }
+
+ al.filtered = false;
+ thread__find_addr_location(thread, machine, cpumode,
+ MAP__FUNCTION, ip, &al, NULL);
+ if (al.sym != NULL) {
+ if (sort__has_parent && !*parent &&
+ symbol__match_parent_regex(al.sym))
+ *parent = al.sym;
+ if (!symbol_conf.use_callchain)
+ break;
+ }
+
+ err = callchain_cursor_append(&callchain_cursor,
+ ip, al.map, al.sym);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int unwind_entry(struct unwind_entry *entry, void *arg)
+{
+ struct callchain_cursor *cursor = arg;
+ return callchain_cursor_append(cursor, entry->ip,
+ entry->map, entry->sym);
+}
+
+int machine__resolve_callchain(struct machine *machine,
+ struct perf_evsel *evsel,
+ struct thread *thread,
+ struct perf_sample *sample,
+ struct symbol **parent)
+
+{
+ int ret;
+
+ callchain_cursor_reset(&callchain_cursor);
+
+ ret = machine__resolve_callchain_sample(machine, thread,
+ sample->callchain, parent);
+ if (ret)
+ return ret;
+
+ /* Can we do dwarf post unwind? */
+ if (!((evsel->attr.sample_type & PERF_SAMPLE_REGS_USER) &&
+ (evsel->attr.sample_type & PERF_SAMPLE_STACK_USER)))
+ return 0;
+
+ /* Bail out if nothing was captured. */
+ if ((!sample->user_regs.regs) ||
+ (!sample->user_stack.size))
+ return 0;
+
+ return unwind__get_entries(unwind_entry, &callchain_cursor, machine,
+ thread, evsel->attr.sample_regs_user,
+ sample);
+
+}
diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h
index b7cde74..5ac5892 100644
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -47,23 +47,32 @@
typedef void (*machine__process_t)(struct machine *machine, void *data);
-void machines__process(struct rb_root *machines,
- machine__process_t process, void *data);
+struct machines {
+ struct machine host;
+ struct rb_root guests;
+};
-struct machine *machines__add(struct rb_root *machines, pid_t pid,
+void machines__init(struct machines *machines);
+void machines__exit(struct machines *machines);
+
+void machines__process_guests(struct machines *machines,
+ machine__process_t process, void *data);
+
+struct machine *machines__add(struct machines *machines, pid_t pid,
const char *root_dir);
-struct machine *machines__find_host(struct rb_root *machines);
-struct machine *machines__find(struct rb_root *machines, pid_t pid);
-struct machine *machines__findnew(struct rb_root *machines, pid_t pid);
+struct machine *machines__find_host(struct machines *machines);
+struct machine *machines__find(struct machines *machines, pid_t pid);
+struct machine *machines__findnew(struct machines *machines, pid_t pid);
-void machines__set_id_hdr_size(struct rb_root *machines, u16 id_hdr_size);
+void machines__set_id_hdr_size(struct machines *machines, u16 id_hdr_size);
char *machine__mmap_name(struct machine *machine, char *bf, size_t size);
int machine__init(struct machine *machine, const char *root_dir, pid_t pid);
void machine__exit(struct machine *machine);
+void machine__delete_dead_threads(struct machine *machine);
+void machine__delete_threads(struct machine *machine);
void machine__delete(struct machine *machine);
-
struct branch_info *machine__resolve_bstack(struct machine *machine,
struct thread *thread,
struct branch_stack *bs);
@@ -129,19 +138,19 @@
int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
symbol_filter_t filter);
-size_t machine__fprintf_dsos_buildid(struct machine *machine,
- FILE *fp, bool with_hits);
-size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp);
-size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
- FILE *fp, bool with_hits);
+size_t machine__fprintf_dsos_buildid(struct machine *machine, FILE *fp,
+ bool (skip)(struct dso *dso, int parm), int parm);
+size_t machines__fprintf_dsos(struct machines *machines, FILE *fp);
+size_t machines__fprintf_dsos_buildid(struct machines *machines, FILE *fp,
+ bool (skip)(struct dso *dso, int parm), int parm);
void machine__destroy_kernel_maps(struct machine *machine);
int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel);
int machine__create_kernel_maps(struct machine *machine);
-int machines__create_kernel_maps(struct rb_root *machines, pid_t pid);
-int machines__create_guest_kernel_maps(struct rb_root *machines);
-void machines__destroy_guest_kernel_maps(struct rb_root *machines);
+int machines__create_kernel_maps(struct machines *machines, pid_t pid);
+int machines__create_guest_kernel_maps(struct machines *machines);
+void machines__destroy_kernel_maps(struct machines *machines);
size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp);
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 0328d45..6fcb9de 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -11,6 +11,7 @@
#include "strlist.h"
#include "vdso.h"
#include "build-id.h"
+#include <linux/string.h>
const char *map_type__name[MAP__NR_TYPES] = {
[MAP__FUNCTION] = "Functions",
@@ -19,7 +20,8 @@
static inline int is_anon_memory(const char *filename)
{
- return strcmp(filename, "//anon") == 0;
+ return !strcmp(filename, "//anon") ||
+ !strcmp(filename, "/anon_hugepage (deleted)");
}
static inline int is_no_dso_memory(const char *filename)
@@ -28,29 +30,29 @@
!strcmp(filename, "[heap]");
}
-void map__init(struct map *self, enum map_type type,
+void map__init(struct map *map, enum map_type type,
u64 start, u64 end, u64 pgoff, struct dso *dso)
{
- self->type = type;
- self->start = start;
- self->end = end;
- self->pgoff = pgoff;
- self->dso = dso;
- self->map_ip = map__map_ip;
- self->unmap_ip = map__unmap_ip;
- RB_CLEAR_NODE(&self->rb_node);
- self->groups = NULL;
- self->referenced = false;
- self->erange_warned = false;
+ map->type = type;
+ map->start = start;
+ map->end = end;
+ map->pgoff = pgoff;
+ map->dso = dso;
+ map->map_ip = map__map_ip;
+ map->unmap_ip = map__unmap_ip;
+ RB_CLEAR_NODE(&map->rb_node);
+ map->groups = NULL;
+ map->referenced = false;
+ map->erange_warned = false;
}
struct map *map__new(struct list_head *dsos__list, u64 start, u64 len,
u64 pgoff, u32 pid, char *filename,
enum map_type type)
{
- struct map *self = malloc(sizeof(*self));
+ struct map *map = malloc(sizeof(*map));
- if (self != NULL) {
+ if (map != NULL) {
char newfilename[PATH_MAX];
struct dso *dso;
int anon, no_dso, vdso;
@@ -73,10 +75,10 @@
if (dso == NULL)
goto out_delete;
- map__init(self, type, start, start + len, pgoff, dso);
+ map__init(map, type, start, start + len, pgoff, dso);
if (anon || no_dso) {
- self->map_ip = self->unmap_ip = identity__map_ip;
+ map->map_ip = map->unmap_ip = identity__map_ip;
/*
* Set memory without DSO as loaded. All map__find_*
@@ -84,12 +86,12 @@
* unnecessary map__load warning.
*/
if (no_dso)
- dso__set_loaded(dso, self->type);
+ dso__set_loaded(dso, map->type);
}
}
- return self;
+ return map;
out_delete:
- free(self);
+ free(map);
return NULL;
}
@@ -112,48 +114,48 @@
return map;
}
-void map__delete(struct map *self)
+void map__delete(struct map *map)
{
- free(self);
+ free(map);
}
-void map__fixup_start(struct map *self)
+void map__fixup_start(struct map *map)
{
- struct rb_root *symbols = &self->dso->symbols[self->type];
+ struct rb_root *symbols = &map->dso->symbols[map->type];
struct rb_node *nd = rb_first(symbols);
if (nd != NULL) {
struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
- self->start = sym->start;
+ map->start = sym->start;
}
}
-void map__fixup_end(struct map *self)
+void map__fixup_end(struct map *map)
{
- struct rb_root *symbols = &self->dso->symbols[self->type];
+ struct rb_root *symbols = &map->dso->symbols[map->type];
struct rb_node *nd = rb_last(symbols);
if (nd != NULL) {
struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
- self->end = sym->end;
+ map->end = sym->end;
}
}
#define DSO__DELETED "(deleted)"
-int map__load(struct map *self, symbol_filter_t filter)
+int map__load(struct map *map, symbol_filter_t filter)
{
- const char *name = self->dso->long_name;
+ const char *name = map->dso->long_name;
int nr;
- if (dso__loaded(self->dso, self->type))
+ if (dso__loaded(map->dso, map->type))
return 0;
- nr = dso__load(self->dso, self, filter);
+ nr = dso__load(map->dso, map, filter);
if (nr < 0) {
- if (self->dso->has_build_id) {
+ if (map->dso->has_build_id) {
char sbuild_id[BUILD_ID_SIZE * 2 + 1];
- build_id__sprintf(self->dso->build_id,
- sizeof(self->dso->build_id),
+ build_id__sprintf(map->dso->build_id,
+ sizeof(map->dso->build_id),
sbuild_id);
pr_warning("%s with build id %s not found",
name, sbuild_id);
@@ -183,43 +185,36 @@
* Only applies to the kernel, as its symtabs aren't relative like the
* module ones.
*/
- if (self->dso->kernel)
- map__reloc_vmlinux(self);
+ if (map->dso->kernel)
+ map__reloc_vmlinux(map);
return 0;
}
-struct symbol *map__find_symbol(struct map *self, u64 addr,
+struct symbol *map__find_symbol(struct map *map, u64 addr,
symbol_filter_t filter)
{
- if (map__load(self, filter) < 0)
+ if (map__load(map, filter) < 0)
return NULL;
- return dso__find_symbol(self->dso, self->type, addr);
+ return dso__find_symbol(map->dso, map->type, addr);
}
-struct symbol *map__find_symbol_by_name(struct map *self, const char *name,
+struct symbol *map__find_symbol_by_name(struct map *map, const char *name,
symbol_filter_t filter)
{
- if (map__load(self, filter) < 0)
+ if (map__load(map, filter) < 0)
return NULL;
- if (!dso__sorted_by_name(self->dso, self->type))
- dso__sort_by_name(self->dso, self->type);
+ if (!dso__sorted_by_name(map->dso, map->type))
+ dso__sort_by_name(map->dso, map->type);
- return dso__find_symbol_by_name(self->dso, self->type, name);
+ return dso__find_symbol_by_name(map->dso, map->type, name);
}
-struct map *map__clone(struct map *self)
+struct map *map__clone(struct map *map)
{
- struct map *map = malloc(sizeof(*self));
-
- if (!map)
- return NULL;
-
- memcpy(map, self, sizeof(*self));
-
- return map;
+ return memdup(map, sizeof(*map));
}
int map__overlap(struct map *l, struct map *r)
@@ -236,10 +231,10 @@
return 0;
}
-size_t map__fprintf(struct map *self, FILE *fp)
+size_t map__fprintf(struct map *map, FILE *fp)
{
return fprintf(fp, " %" PRIx64 "-%" PRIx64 " %" PRIx64 " %s\n",
- self->start, self->end, self->pgoff, self->dso->name);
+ map->start, map->end, map->pgoff, map->dso->name);
}
size_t map__fprintf_dsoname(struct map *map, FILE *fp)
@@ -527,9 +522,9 @@
return ip - (s64)map->pgoff;
}
-void map__reloc_vmlinux(struct map *self)
+void map__reloc_vmlinux(struct map *map)
{
- struct kmap *kmap = map__kmap(self);
+ struct kmap *kmap = map__kmap(map);
s64 reloc;
if (!kmap->ref_reloc_sym || !kmap->ref_reloc_sym->unrelocated_addr)
@@ -541,9 +536,9 @@
if (!reloc)
return;
- self->map_ip = map__reloc_map_ip;
- self->unmap_ip = map__reloc_unmap_ip;
- self->pgoff = reloc;
+ map->map_ip = map__reloc_map_ip;
+ map->unmap_ip = map__reloc_unmap_ip;
+ map->pgoff = reloc;
}
void maps__insert(struct rb_root *maps, struct map *map)
@@ -566,9 +561,9 @@
rb_insert_color(&map->rb_node, maps);
}
-void maps__remove(struct rb_root *self, struct map *map)
+void maps__remove(struct rb_root *maps, struct map *map)
{
- rb_erase(&map->rb_node, self);
+ rb_erase(&map->rb_node, maps);
}
struct map *maps__find(struct rb_root *maps, u64 ip)
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index bcb39e2..a887f2c 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -57,9 +57,9 @@
struct machine *machine;
};
-static inline struct kmap *map__kmap(struct map *self)
+static inline struct kmap *map__kmap(struct map *map)
{
- return (struct kmap *)(self + 1);
+ return (struct kmap *)(map + 1);
}
static inline u64 map__map_ip(struct map *map, u64 ip)
@@ -85,27 +85,27 @@
typedef int (*symbol_filter_t)(struct map *map, struct symbol *sym);
-void map__init(struct map *self, enum map_type type,
+void map__init(struct map *map, enum map_type type,
u64 start, u64 end, u64 pgoff, struct dso *dso);
struct map *map__new(struct list_head *dsos__list, u64 start, u64 len,
u64 pgoff, u32 pid, char *filename,
enum map_type type);
struct map *map__new2(u64 start, struct dso *dso, enum map_type type);
-void map__delete(struct map *self);
-struct map *map__clone(struct map *self);
+void map__delete(struct map *map);
+struct map *map__clone(struct map *map);
int map__overlap(struct map *l, struct map *r);
-size_t map__fprintf(struct map *self, FILE *fp);
+size_t map__fprintf(struct map *map, FILE *fp);
size_t map__fprintf_dsoname(struct map *map, FILE *fp);
-int map__load(struct map *self, symbol_filter_t filter);
-struct symbol *map__find_symbol(struct map *self,
+int map__load(struct map *map, symbol_filter_t filter);
+struct symbol *map__find_symbol(struct map *map,
u64 addr, symbol_filter_t filter);
-struct symbol *map__find_symbol_by_name(struct map *self, const char *name,
+struct symbol *map__find_symbol_by_name(struct map *map, const char *name,
symbol_filter_t filter);
-void map__fixup_start(struct map *self);
-void map__fixup_end(struct map *self);
+void map__fixup_start(struct map *map);
+void map__fixup_end(struct map *map);
-void map__reloc_vmlinux(struct map *self);
+void map__reloc_vmlinux(struct map *map);
size_t __map_groups__fprintf_maps(struct map_groups *mg,
enum map_type type, int verbose, FILE *fp);
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 2d8d53be..c84f48c 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -380,8 +380,8 @@
return 0;
}
-static int add_tracepoint_multi(struct list_head **list, int *idx,
- char *sys_name, char *evt_name)
+static int add_tracepoint_multi_event(struct list_head **list, int *idx,
+ char *sys_name, char *evt_name)
{
char evt_path[MAXPATHLEN];
struct dirent *evt_ent;
@@ -408,6 +408,47 @@
ret = add_tracepoint(list, idx, sys_name, evt_ent->d_name);
}
+ closedir(evt_dir);
+ return ret;
+}
+
+static int add_tracepoint_event(struct list_head **list, int *idx,
+ char *sys_name, char *evt_name)
+{
+ return strpbrk(evt_name, "*?") ?
+ add_tracepoint_multi_event(list, idx, sys_name, evt_name) :
+ add_tracepoint(list, idx, sys_name, evt_name);
+}
+
+static int add_tracepoint_multi_sys(struct list_head **list, int *idx,
+ char *sys_name, char *evt_name)
+{
+ struct dirent *events_ent;
+ DIR *events_dir;
+ int ret = 0;
+
+ events_dir = opendir(tracing_events_path);
+ if (!events_dir) {
+ perror("Can't open event dir");
+ return -1;
+ }
+
+ while (!ret && (events_ent = readdir(events_dir))) {
+ if (!strcmp(events_ent->d_name, ".")
+ || !strcmp(events_ent->d_name, "..")
+ || !strcmp(events_ent->d_name, "enable")
+ || !strcmp(events_ent->d_name, "header_event")
+ || !strcmp(events_ent->d_name, "header_page"))
+ continue;
+
+ if (!strglobmatch(events_ent->d_name, sys_name))
+ continue;
+
+ ret = add_tracepoint_event(list, idx, events_ent->d_name,
+ evt_name);
+ }
+
+ closedir(events_dir);
return ret;
}
@@ -420,9 +461,10 @@
if (ret)
return ret;
- return strpbrk(event, "*?") ?
- add_tracepoint_multi(list, idx, sys, event) :
- add_tracepoint(list, idx, sys, event);
+ if (strpbrk(sys, "*?"))
+ return add_tracepoint_multi_sys(list, idx, sys, event);
+ else
+ return add_tracepoint_event(list, idx, sys, event);
}
static int
@@ -492,7 +534,7 @@
}
static int config_term(struct perf_event_attr *attr,
- struct parse_events__term *term)
+ struct parse_events_term *term)
{
#define CHECK_TYPE_VAL(type) \
do { \
@@ -537,7 +579,7 @@
static int config_attr(struct perf_event_attr *attr,
struct list_head *head, int fail)
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
list_for_each_entry(term, head, list)
if (config_term(attr, term) && fail)
@@ -563,14 +605,14 @@
return add_event(list, idx, &attr, NULL);
}
-static int parse_events__is_name_term(struct parse_events__term *term)
+static int parse_events__is_name_term(struct parse_events_term *term)
{
return term->type_term == PARSE_EVENTS__TERM_TYPE_NAME;
}
static char *pmu_event_name(struct list_head *head_terms)
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
list_for_each_entry(term, head_terms, list)
if (parse_events__is_name_term(term))
@@ -657,14 +699,6 @@
int exclude = eu | ek | eh;
int exclude_GH = evsel ? evsel->exclude_GH : 0;
- /*
- * We are here for group and 'GH' was not set as event
- * modifier and whatever event/group modifier override
- * default 'GH' setup.
- */
- if (evsel && !exclude_GH)
- eH = eG = 0;
-
memset(mod, 0, sizeof(*mod));
while (*str) {
@@ -814,7 +848,7 @@
*/
int parse_events_terms(struct list_head *terms, const char *str)
{
- struct parse_events_data__terms data = {
+ struct parse_events_terms data = {
.terms = NULL,
};
int ret;
@@ -830,10 +864,9 @@
return ret;
}
-int parse_events(struct perf_evlist *evlist, const char *str,
- int unset __maybe_unused)
+int parse_events(struct perf_evlist *evlist, const char *str)
{
- struct parse_events_data__events data = {
+ struct parse_events_evlist data = {
.list = LIST_HEAD_INIT(data.list),
.idx = evlist->nr_entries,
};
@@ -843,6 +876,7 @@
if (!ret) {
int entries = data.idx - evlist->nr_entries;
perf_evlist__splice_list_tail(evlist, &data.list, entries);
+ evlist->nr_groups += data.nr_groups;
return 0;
}
@@ -858,7 +892,7 @@
int unset __maybe_unused)
{
struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
- int ret = parse_events(evlist, str, unset);
+ int ret = parse_events(evlist, str);
if (ret) {
fprintf(stderr, "invalid or unsupported event: '%s'\n", str);
@@ -1121,16 +1155,16 @@
print_tracepoint_events(NULL, NULL, name_only);
}
-int parse_events__is_hardcoded_term(struct parse_events__term *term)
+int parse_events__is_hardcoded_term(struct parse_events_term *term)
{
return term->type_term != PARSE_EVENTS__TERM_TYPE_USER;
}
-static int new_term(struct parse_events__term **_term, int type_val,
+static int new_term(struct parse_events_term **_term, int type_val,
int type_term, char *config,
char *str, u64 num)
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
term = zalloc(sizeof(*term));
if (!term)
@@ -1156,21 +1190,21 @@
return 0;
}
-int parse_events__term_num(struct parse_events__term **term,
+int parse_events_term__num(struct parse_events_term **term,
int type_term, char *config, u64 num)
{
return new_term(term, PARSE_EVENTS__TERM_TYPE_NUM, type_term,
config, NULL, num);
}
-int parse_events__term_str(struct parse_events__term **term,
+int parse_events_term__str(struct parse_events_term **term,
int type_term, char *config, char *str)
{
return new_term(term, PARSE_EVENTS__TERM_TYPE_STR, type_term,
config, str, 0);
}
-int parse_events__term_sym_hw(struct parse_events__term **term,
+int parse_events_term__sym_hw(struct parse_events_term **term,
char *config, unsigned idx)
{
struct event_symbol *sym;
@@ -1188,8 +1222,8 @@
(char *) "event", (char *) sym->symbol, 0);
}
-int parse_events__term_clone(struct parse_events__term **new,
- struct parse_events__term *term)
+int parse_events_term__clone(struct parse_events_term **new,
+ struct parse_events_term *term)
{
return new_term(new, term->type_val, term->type_term, term->config,
term->val.str, term->val.num);
@@ -1197,7 +1231,7 @@
void parse_events__free_terms(struct list_head *terms)
{
- struct parse_events__term *term, *h;
+ struct parse_events_term *term, *h;
list_for_each_entry_safe(term, h, terms, list)
free(term);
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index b7af80b..8a48593 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -29,8 +29,7 @@
extern int parse_events_option(const struct option *opt, const char *str,
int unset);
-extern int parse_events(struct perf_evlist *evlist, const char *str,
- int unset);
+extern int parse_events(struct perf_evlist *evlist, const char *str);
extern int parse_events_terms(struct list_head *terms, const char *str);
extern int parse_filter(const struct option *opt, const char *str, int unset);
@@ -51,7 +50,7 @@
PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE,
};
-struct parse_events__term {
+struct parse_events_term {
char *config;
union {
char *str;
@@ -62,24 +61,25 @@
struct list_head list;
};
-struct parse_events_data__events {
+struct parse_events_evlist {
struct list_head list;
int idx;
+ int nr_groups;
};
-struct parse_events_data__terms {
+struct parse_events_terms {
struct list_head *terms;
};
-int parse_events__is_hardcoded_term(struct parse_events__term *term);
-int parse_events__term_num(struct parse_events__term **_term,
+int parse_events__is_hardcoded_term(struct parse_events_term *term);
+int parse_events_term__num(struct parse_events_term **_term,
int type_term, char *config, u64 num);
-int parse_events__term_str(struct parse_events__term **_term,
+int parse_events_term__str(struct parse_events_term **_term,
int type_term, char *config, char *str);
-int parse_events__term_sym_hw(struct parse_events__term **term,
+int parse_events_term__sym_hw(struct parse_events_term **term,
char *config, unsigned idx);
-int parse_events__term_clone(struct parse_events__term **new,
- struct parse_events__term *term);
+int parse_events_term__clone(struct parse_events_term **new,
+ struct parse_events_term *term);
void parse_events__free_terms(struct list_head *terms);
int parse_events__modifier_event(struct list_head *list, char *str, bool add);
int parse_events__modifier_group(struct list_head *list, char *event_mod);
diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index 0f9914a..afc44c1 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -1,5 +1,4 @@
%pure-parser
-%name-prefix "parse_events_"
%parse-param {void *_data}
%parse-param {void *scanner}
%lex-param {void* scanner}
@@ -23,6 +22,14 @@
YYABORT; \
} while (0)
+static inc_group_count(struct list_head *list,
+ struct parse_events_evlist *data)
+{
+ /* Count groups only have more than 1 members */
+ if (!list_is_last(list->next, list))
+ data->nr_groups++;
+}
+
%}
%token PE_START_EVENTS PE_START_TERMS
@@ -68,7 +75,7 @@
char *str;
u64 num;
struct list_head *head;
- struct parse_events__term *term;
+ struct parse_events_term *term;
}
%%
@@ -79,7 +86,7 @@
start_events: groups
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
parse_events_update_lists($1, &data->list);
}
@@ -123,6 +130,7 @@
{
struct list_head *list = $3;
+ inc_group_count(list, _data);
parse_events__set_leader($1, list);
$$ = list;
}
@@ -131,6 +139,7 @@
{
struct list_head *list = $2;
+ inc_group_count(list, _data);
parse_events__set_leader(NULL, list);
$$ = list;
}
@@ -186,7 +195,7 @@
event_pmu:
PE_NAME '/' event_config '/'
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_pmu(&list, &data->idx, $1, $3));
@@ -202,7 +211,7 @@
event_legacy_symbol:
value_sym '/' event_config '/'
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
int type = $1 >> 16;
int config = $1 & 255;
@@ -215,7 +224,7 @@
|
value_sym sep_slash_dc
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
int type = $1 >> 16;
int config = $1 & 255;
@@ -228,7 +237,7 @@
event_legacy_cache:
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, $3, $5));
@@ -237,7 +246,7 @@
|
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, $3, NULL));
@@ -246,7 +255,7 @@
|
PE_NAME_CACHE_TYPE
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, NULL, NULL));
@@ -256,7 +265,7 @@
event_legacy_mem:
PE_PREFIX_MEM PE_VALUE ':' PE_MODIFIER_BP sep_dc
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_breakpoint(&list, &data->idx,
@@ -266,7 +275,7 @@
|
PE_PREFIX_MEM PE_VALUE sep_dc
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_breakpoint(&list, &data->idx,
@@ -277,7 +286,7 @@
event_legacy_tracepoint:
PE_NAME ':' PE_NAME
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_tracepoint(&list, &data->idx, $1, $3));
@@ -287,7 +296,7 @@
event_legacy_numeric:
PE_VALUE ':' PE_VALUE
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_numeric(&list, &data->idx, (u32)$1, $3, NULL));
@@ -297,7 +306,7 @@
event_legacy_raw:
PE_RAW
{
- struct parse_events_data__events *data = _data;
+ struct parse_events_evlist *data = _data;
struct list_head *list = NULL;
ABORT_ON(parse_events_add_numeric(&list, &data->idx,
@@ -307,7 +316,7 @@
start_terms: event_config
{
- struct parse_events_data__terms *data = _data;
+ struct parse_events_terms *data = _data;
data->terms = $1;
}
@@ -315,7 +324,7 @@
event_config ',' event_term
{
struct list_head *head = $1;
- struct parse_events__term *term = $3;
+ struct parse_events_term *term = $3;
ABORT_ON(!head);
list_add_tail(&term->list, head);
@@ -325,7 +334,7 @@
event_term
{
struct list_head *head = malloc(sizeof(*head));
- struct parse_events__term *term = $1;
+ struct parse_events_term *term = $1;
ABORT_ON(!head);
INIT_LIST_HEAD(head);
@@ -336,70 +345,70 @@
event_term:
PE_NAME '=' PE_NAME
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_str(&term, PARSE_EVENTS__TERM_TYPE_USER,
+ ABORT_ON(parse_events_term__str(&term, PARSE_EVENTS__TERM_TYPE_USER,
$1, $3));
$$ = term;
}
|
PE_NAME '=' PE_VALUE
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_num(&term, PARSE_EVENTS__TERM_TYPE_USER,
+ ABORT_ON(parse_events_term__num(&term, PARSE_EVENTS__TERM_TYPE_USER,
$1, $3));
$$ = term;
}
|
PE_NAME '=' PE_VALUE_SYM_HW
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
int config = $3 & 255;
- ABORT_ON(parse_events__term_sym_hw(&term, $1, config));
+ ABORT_ON(parse_events_term__sym_hw(&term, $1, config));
$$ = term;
}
|
PE_NAME
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_num(&term, PARSE_EVENTS__TERM_TYPE_USER,
+ ABORT_ON(parse_events_term__num(&term, PARSE_EVENTS__TERM_TYPE_USER,
$1, 1));
$$ = term;
}
|
PE_VALUE_SYM_HW
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
int config = $1 & 255;
- ABORT_ON(parse_events__term_sym_hw(&term, NULL, config));
+ ABORT_ON(parse_events_term__sym_hw(&term, NULL, config));
$$ = term;
}
|
PE_TERM '=' PE_NAME
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_str(&term, (int)$1, NULL, $3));
+ ABORT_ON(parse_events_term__str(&term, (int)$1, NULL, $3));
$$ = term;
}
|
PE_TERM '=' PE_VALUE
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_num(&term, (int)$1, NULL, $3));
+ ABORT_ON(parse_events_term__num(&term, (int)$1, NULL, $3));
$$ = term;
}
|
PE_TERM
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
- ABORT_ON(parse_events__term_num(&term, (int)$1, NULL, 1));
+ ABORT_ON(parse_events_term__num(&term, (int)$1, NULL, 1));
$$ = term;
}
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index 9bdc60c..4c6f9c4 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -1,4 +1,3 @@
-
#include <linux/list.h>
#include <sys/types.h>
#include <sys/stat.h>
@@ -11,6 +10,19 @@
#include "parse-events.h"
#include "cpumap.h"
+struct perf_pmu_alias {
+ char *name;
+ struct list_head terms;
+ struct list_head list;
+};
+
+struct perf_pmu_format {
+ char *name;
+ int value;
+ DECLARE_BITMAP(bits, PERF_PMU_FORMAT_BITS);
+ struct list_head list;
+};
+
#define EVENT_SOURCE_DEVICE_PATH "/bus/event_source/devices/"
int perf_pmu_parse(struct list_head *list, char *name);
@@ -85,7 +97,7 @@
static int perf_pmu__new_alias(struct list_head *list, char *name, FILE *file)
{
- struct perf_pmu__alias *alias;
+ struct perf_pmu_alias *alias;
char buf[256];
int ret;
@@ -172,15 +184,15 @@
return 0;
}
-static int pmu_alias_terms(struct perf_pmu__alias *alias,
+static int pmu_alias_terms(struct perf_pmu_alias *alias,
struct list_head *terms)
{
- struct parse_events__term *term, *clone;
+ struct parse_events_term *term, *clone;
LIST_HEAD(list);
int ret;
list_for_each_entry(term, &alias->terms, list) {
- ret = parse_events__term_clone(&clone, term);
+ ret = parse_events_term__clone(&clone, term);
if (ret) {
parse_events__free_terms(&list);
return ret;
@@ -360,10 +372,10 @@
return pmu_lookup(name);
}
-static struct perf_pmu__format*
+static struct perf_pmu_format *
pmu_find_format(struct list_head *formats, char *name)
{
- struct perf_pmu__format *format;
+ struct perf_pmu_format *format;
list_for_each_entry(format, formats, list)
if (!strcmp(format->name, name))
@@ -403,9 +415,9 @@
*/
static int pmu_config_term(struct list_head *formats,
struct perf_event_attr *attr,
- struct parse_events__term *term)
+ struct parse_events_term *term)
{
- struct perf_pmu__format *format;
+ struct perf_pmu_format *format;
__u64 *vp;
/*
@@ -450,7 +462,7 @@
struct perf_event_attr *attr,
struct list_head *head_terms)
{
- struct parse_events__term *term;
+ struct parse_events_term *term;
list_for_each_entry(term, head_terms, list)
if (pmu_config_term(formats, attr, term))
@@ -471,10 +483,10 @@
return perf_pmu__config_terms(&pmu->format, attr, head_terms);
}
-static struct perf_pmu__alias *pmu_find_alias(struct perf_pmu *pmu,
- struct parse_events__term *term)
+static struct perf_pmu_alias *pmu_find_alias(struct perf_pmu *pmu,
+ struct parse_events_term *term)
{
- struct perf_pmu__alias *alias;
+ struct perf_pmu_alias *alias;
char *name;
if (parse_events__is_hardcoded_term(term))
@@ -507,8 +519,8 @@
*/
int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms)
{
- struct parse_events__term *term, *h;
- struct perf_pmu__alias *alias;
+ struct parse_events_term *term, *h;
+ struct perf_pmu_alias *alias;
int ret;
list_for_each_entry_safe(term, h, head_terms, list) {
@@ -527,7 +539,7 @@
int perf_pmu__new_format(struct list_head *list, char *name,
int config, unsigned long *bits)
{
- struct perf_pmu__format *format;
+ struct perf_pmu_format *format;
format = zalloc(sizeof(*format));
if (!format)
@@ -548,7 +560,7 @@
if (!to)
to = from;
- memset(bits, 0, BITS_TO_LONGS(PERF_PMU_FORMAT_BITS));
+ memset(bits, 0, BITS_TO_BYTES(PERF_PMU_FORMAT_BITS));
for (b = from; b <= to; b++)
set_bit(b, bits);
}
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index a313ed7..32fe55b 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -12,19 +12,6 @@
#define PERF_PMU_FORMAT_BITS 64
-struct perf_pmu__format {
- char *name;
- int value;
- DECLARE_BITMAP(bits, PERF_PMU_FORMAT_BITS);
- struct list_head list;
-};
-
-struct perf_pmu__alias {
- char *name;
- struct list_head terms;
- struct list_head list;
-};
-
struct perf_pmu {
char *name;
__u32 type;
@@ -42,7 +29,7 @@
struct list_head *head_terms);
int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms);
struct list_head *perf_pmu__alias(struct perf_pmu *pmu,
- struct list_head *head_terms);
+ struct list_head *head_terms);
int perf_pmu_wrap(void);
void perf_pmu_error(struct list_head *list, char *name, char const *msg);
diff --git a/tools/perf/util/pmu.y b/tools/perf/util/pmu.y
index ec89804..bfd7e850 100644
--- a/tools/perf/util/pmu.y
+++ b/tools/perf/util/pmu.y
@@ -1,5 +1,4 @@
-%name-prefix "perf_pmu_"
%parse-param {struct list_head *format}
%parse-param {char *name}
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 1daf5c1..be03293 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -413,12 +413,12 @@
dwarf_diename(vr_die), dwarf_diename(&type));
return -EINVAL;
}
+ if (die_get_real_type(&type, &type) == NULL) {
+ pr_warning("Failed to get a type"
+ " information.\n");
+ return -ENOENT;
+ }
if (ret == DW_TAG_pointer_type) {
- if (die_get_real_type(&type, &type) == NULL) {
- pr_warning("Failed to get a type"
- " information.\n");
- return -ENOENT;
- }
while (*ref_ptr)
ref_ptr = &(*ref_ptr)->next;
/* Add new reference with offset +0 */
diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources
index c40c2d3..64536a9 100644
--- a/tools/perf/util/python-ext-sources
+++ b/tools/perf/util/python-ext-sources
@@ -18,4 +18,5 @@
util/debugfs.c
util/rblist.c
util/strlist.c
+util/sysfs.c
../../lib/rbtree.c
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index a2657fd..925e0c3 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -1045,3 +1045,12 @@
if (PyErr_Occurred())
PyErr_SetString(PyExc_ImportError, "perf: Init failed!");
}
+
+/*
+ * Dummy, to avoid dragging all the test_attr infrastructure in the python
+ * binding.
+ */
+void test_attr__open(struct perf_event_attr *attr, pid_t pid, int cpu,
+ int fd, int group_fd, unsigned long flags)
+{
+}
diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c
index f80605e..eacec85 100644
--- a/tools/perf/util/scripting-engines/trace-event-perl.c
+++ b/tools/perf/util/scripting-engines/trace-event-perl.c
@@ -292,6 +292,7 @@
ns = nsecs - s * NSECS_PER_SEC;
scripting_context->event_data = data;
+ scripting_context->pevent = evsel->tp_format->pevent;
ENTER;
SAVETMPS;
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 14683df..e87aa5d 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -265,6 +265,7 @@
ns = nsecs - s * NSECS_PER_SEC;
scripting_context->event_data = data;
+ scripting_context->pevent = evsel->tp_format->pevent;
context = PyCObject_FromVoidPtr(scripting_context, NULL);
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index ce6f511..bd85280b 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -16,7 +16,6 @@
#include "cpumap.h"
#include "event-parse.h"
#include "perf_regs.h"
-#include "unwind.h"
#include "vdso.h"
static int perf_session__open(struct perf_session *self, bool force)
@@ -87,13 +86,12 @@
{
u16 id_hdr_size = perf_evlist__id_hdr_size(session->evlist);
- session->host_machine.id_hdr_size = id_hdr_size;
machines__set_id_hdr_size(&session->machines, id_hdr_size);
}
int perf_session__create_kernel_maps(struct perf_session *self)
{
- int ret = machine__create_kernel_maps(&self->host_machine);
+ int ret = machine__create_kernel_maps(&self->machines.host);
if (ret >= 0)
ret = machines__create_guest_kernel_maps(&self->machines);
@@ -102,8 +100,7 @@
static void perf_session__destroy_kernel_maps(struct perf_session *self)
{
- machine__destroy_kernel_maps(&self->host_machine);
- machines__destroy_guest_kernel_maps(&self->machines);
+ machines__destroy_kernel_maps(&self->machines);
}
struct perf_session *perf_session__new(const char *filename, int mode,
@@ -128,22 +125,11 @@
goto out;
memcpy(self->filename, filename, len);
- /*
- * On 64bit we can mmap the data file in one go. No need for tiny mmap
- * slices. On 32bit we use 32MB.
- */
-#if BITS_PER_LONG == 64
- self->mmap_window = ULLONG_MAX;
-#else
- self->mmap_window = 32 * 1024 * 1024ULL;
-#endif
- self->machines = RB_ROOT;
self->repipe = repipe;
INIT_LIST_HEAD(&self->ordered_samples.samples);
INIT_LIST_HEAD(&self->ordered_samples.sample_cache);
INIT_LIST_HEAD(&self->ordered_samples.to_free);
- machine__init(&self->host_machine, "", HOST_KERNEL_ID);
- hists__init(&self->hists);
+ machines__init(&self->machines);
if (mode == O_RDONLY) {
if (perf_session__open(self, force) < 0)
@@ -171,37 +157,30 @@
return NULL;
}
-static void machine__delete_dead_threads(struct machine *machine)
-{
- struct thread *n, *t;
-
- list_for_each_entry_safe(t, n, &machine->dead_threads, node) {
- list_del(&t->node);
- thread__delete(t);
- }
-}
-
static void perf_session__delete_dead_threads(struct perf_session *session)
{
- machine__delete_dead_threads(&session->host_machine);
-}
-
-static void machine__delete_threads(struct machine *self)
-{
- struct rb_node *nd = rb_first(&self->threads);
-
- while (nd) {
- struct thread *t = rb_entry(nd, struct thread, rb_node);
-
- rb_erase(&t->rb_node, &self->threads);
- nd = rb_next(nd);
- thread__delete(t);
- }
+ machine__delete_dead_threads(&session->machines.host);
}
static void perf_session__delete_threads(struct perf_session *session)
{
- machine__delete_threads(&session->host_machine);
+ machine__delete_threads(&session->machines.host);
+}
+
+static void perf_session_env__delete(struct perf_session_env *env)
+{
+ free(env->hostname);
+ free(env->os_release);
+ free(env->version);
+ free(env->arch);
+ free(env->cpu_desc);
+ free(env->cpuid);
+
+ free(env->cmdline);
+ free(env->sibling_cores);
+ free(env->sibling_threads);
+ free(env->numa_nodes);
+ free(env->pmu_mappings);
}
void perf_session__delete(struct perf_session *self)
@@ -209,198 +188,13 @@
perf_session__destroy_kernel_maps(self);
perf_session__delete_dead_threads(self);
perf_session__delete_threads(self);
- machine__exit(&self->host_machine);
+ perf_session_env__delete(&self->header.env);
+ machines__exit(&self->machines);
close(self->fd);
free(self);
vdso__exit();
}
-void machine__remove_thread(struct machine *self, struct thread *th)
-{
- self->last_match = NULL;
- rb_erase(&th->rb_node, &self->threads);
- /*
- * We may have references to this thread, for instance in some hist_entry
- * instances, so just move them to a separate list.
- */
- list_add_tail(&th->node, &self->dead_threads);
-}
-
-static bool symbol__match_parent_regex(struct symbol *sym)
-{
- if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
- return 1;
-
- return 0;
-}
-
-static const u8 cpumodes[] = {
- PERF_RECORD_MISC_USER,
- PERF_RECORD_MISC_KERNEL,
- PERF_RECORD_MISC_GUEST_USER,
- PERF_RECORD_MISC_GUEST_KERNEL
-};
-#define NCPUMODES (sizeof(cpumodes)/sizeof(u8))
-
-static void ip__resolve_ams(struct machine *self, struct thread *thread,
- struct addr_map_symbol *ams,
- u64 ip)
-{
- struct addr_location al;
- size_t i;
- u8 m;
-
- memset(&al, 0, sizeof(al));
-
- for (i = 0; i < NCPUMODES; i++) {
- m = cpumodes[i];
- /*
- * We cannot use the header.misc hint to determine whether a
- * branch stack address is user, kernel, guest, hypervisor.
- * Branches may straddle the kernel/user/hypervisor boundaries.
- * Thus, we have to try consecutively until we find a match
- * or else, the symbol is unknown
- */
- thread__find_addr_location(thread, self, m, MAP__FUNCTION,
- ip, &al, NULL);
- if (al.sym)
- goto found;
- }
-found:
- ams->addr = ip;
- ams->al_addr = al.addr;
- ams->sym = al.sym;
- ams->map = al.map;
-}
-
-struct branch_info *machine__resolve_bstack(struct machine *self,
- struct thread *thr,
- struct branch_stack *bs)
-{
- struct branch_info *bi;
- unsigned int i;
-
- bi = calloc(bs->nr, sizeof(struct branch_info));
- if (!bi)
- return NULL;
-
- for (i = 0; i < bs->nr; i++) {
- ip__resolve_ams(self, thr, &bi[i].to, bs->entries[i].to);
- ip__resolve_ams(self, thr, &bi[i].from, bs->entries[i].from);
- bi[i].flags = bs->entries[i].flags;
- }
- return bi;
-}
-
-static int machine__resolve_callchain_sample(struct machine *machine,
- struct thread *thread,
- struct ip_callchain *chain,
- struct symbol **parent)
-
-{
- u8 cpumode = PERF_RECORD_MISC_USER;
- unsigned int i;
- int err;
-
- callchain_cursor_reset(&callchain_cursor);
-
- if (chain->nr > PERF_MAX_STACK_DEPTH) {
- pr_warning("corrupted callchain. skipping...\n");
- return 0;
- }
-
- for (i = 0; i < chain->nr; i++) {
- u64 ip;
- struct addr_location al;
-
- if (callchain_param.order == ORDER_CALLEE)
- ip = chain->ips[i];
- else
- ip = chain->ips[chain->nr - i - 1];
-
- if (ip >= PERF_CONTEXT_MAX) {
- switch (ip) {
- case PERF_CONTEXT_HV:
- cpumode = PERF_RECORD_MISC_HYPERVISOR;
- break;
- case PERF_CONTEXT_KERNEL:
- cpumode = PERF_RECORD_MISC_KERNEL;
- break;
- case PERF_CONTEXT_USER:
- cpumode = PERF_RECORD_MISC_USER;
- break;
- default:
- pr_debug("invalid callchain context: "
- "%"PRId64"\n", (s64) ip);
- /*
- * It seems the callchain is corrupted.
- * Discard all.
- */
- callchain_cursor_reset(&callchain_cursor);
- return 0;
- }
- continue;
- }
-
- al.filtered = false;
- thread__find_addr_location(thread, machine, cpumode,
- MAP__FUNCTION, ip, &al, NULL);
- if (al.sym != NULL) {
- if (sort__has_parent && !*parent &&
- symbol__match_parent_regex(al.sym))
- *parent = al.sym;
- if (!symbol_conf.use_callchain)
- break;
- }
-
- err = callchain_cursor_append(&callchain_cursor,
- ip, al.map, al.sym);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static int unwind_entry(struct unwind_entry *entry, void *arg)
-{
- struct callchain_cursor *cursor = arg;
- return callchain_cursor_append(cursor, entry->ip,
- entry->map, entry->sym);
-}
-
-int machine__resolve_callchain(struct machine *machine,
- struct perf_evsel *evsel,
- struct thread *thread,
- struct perf_sample *sample,
- struct symbol **parent)
-
-{
- int ret;
-
- callchain_cursor_reset(&callchain_cursor);
-
- ret = machine__resolve_callchain_sample(machine, thread,
- sample->callchain, parent);
- if (ret)
- return ret;
-
- /* Can we do dwarf post unwind? */
- if (!((evsel->attr.sample_type & PERF_SAMPLE_REGS_USER) &&
- (evsel->attr.sample_type & PERF_SAMPLE_STACK_USER)))
- return 0;
-
- /* Bail out if nothing was captured. */
- if ((!sample->user_regs.regs) ||
- (!sample->user_stack.size))
- return 0;
-
- return unwind__get_entries(unwind_entry, &callchain_cursor, machine,
- thread, evsel->attr.sample_regs_user,
- sample);
-
-}
-
static int process_event_synth_tracing_data_stub(union perf_event *event
__maybe_unused,
struct perf_session *session
@@ -1027,7 +821,7 @@
return perf_session__findnew_machine(session, pid);
}
- return perf_session__find_host_machine(session);
+ return &session->machines.host;
}
static int perf_session_deliver_event(struct perf_session *session,
@@ -1065,11 +859,11 @@
case PERF_RECORD_SAMPLE:
dump_sample(evsel, event, sample);
if (evsel == NULL) {
- ++session->hists.stats.nr_unknown_id;
+ ++session->stats.nr_unknown_id;
return 0;
}
if (machine == NULL) {
- ++session->hists.stats.nr_unprocessable_samples;
+ ++session->stats.nr_unprocessable_samples;
return 0;
}
return tool->sample(tool, event, sample, evsel, machine);
@@ -1083,7 +877,7 @@
return tool->exit(tool, event, sample, machine);
case PERF_RECORD_LOST:
if (tool->lost == perf_event__process_lost)
- session->hists.stats.total_lost += event->lost.lost;
+ session->stats.total_lost += event->lost.lost;
return tool->lost(tool, event, sample, machine);
case PERF_RECORD_READ:
return tool->read(tool, event, sample, evsel, machine);
@@ -1092,7 +886,7 @@
case PERF_RECORD_UNTHROTTLE:
return tool->unthrottle(tool, event, sample, machine);
default:
- ++session->hists.stats.nr_unknown_events;
+ ++session->stats.nr_unknown_events;
return -1;
}
}
@@ -1106,8 +900,8 @@
if (!ip_callchain__valid(sample->callchain, event)) {
pr_debug("call-chain problem with event, skipping it.\n");
- ++session->hists.stats.nr_invalid_chains;
- session->hists.stats.total_invalid_chains += sample->period;
+ ++session->stats.nr_invalid_chains;
+ session->stats.total_invalid_chains += sample->period;
return -EINVAL;
}
return 0;
@@ -1165,7 +959,7 @@
if (event->header.type >= PERF_RECORD_HEADER_MAX)
return -EINVAL;
- hists__inc_nr_events(&session->hists, event->header.type);
+ events_stats__inc(&session->stats, event->header.type);
if (event->header.type >= PERF_RECORD_USER_TYPE_START)
return perf_session__process_user_event(session, event, tool, file_offset);
@@ -1201,7 +995,7 @@
struct thread *perf_session__findnew(struct perf_session *session, pid_t pid)
{
- return machine__findnew_thread(&session->host_machine, pid);
+ return machine__findnew_thread(&session->machines.host, pid);
}
static struct thread *perf_session__register_idle_thread(struct perf_session *self)
@@ -1220,39 +1014,39 @@
const struct perf_tool *tool)
{
if (tool->lost == perf_event__process_lost &&
- session->hists.stats.nr_events[PERF_RECORD_LOST] != 0) {
+ session->stats.nr_events[PERF_RECORD_LOST] != 0) {
ui__warning("Processed %d events and lost %d chunks!\n\n"
"Check IO/CPU overload!\n\n",
- session->hists.stats.nr_events[0],
- session->hists.stats.nr_events[PERF_RECORD_LOST]);
+ session->stats.nr_events[0],
+ session->stats.nr_events[PERF_RECORD_LOST]);
}
- if (session->hists.stats.nr_unknown_events != 0) {
+ if (session->stats.nr_unknown_events != 0) {
ui__warning("Found %u unknown events!\n\n"
"Is this an older tool processing a perf.data "
"file generated by a more recent tool?\n\n"
"If that is not the case, consider "
"reporting to linux-kernel@vger.kernel.org.\n\n",
- session->hists.stats.nr_unknown_events);
+ session->stats.nr_unknown_events);
}
- if (session->hists.stats.nr_unknown_id != 0) {
+ if (session->stats.nr_unknown_id != 0) {
ui__warning("%u samples with id not present in the header\n",
- session->hists.stats.nr_unknown_id);
+ session->stats.nr_unknown_id);
}
- if (session->hists.stats.nr_invalid_chains != 0) {
+ if (session->stats.nr_invalid_chains != 0) {
ui__warning("Found invalid callchains!\n\n"
"%u out of %u events were discarded for this reason.\n\n"
"Consider reporting to linux-kernel@vger.kernel.org.\n\n",
- session->hists.stats.nr_invalid_chains,
- session->hists.stats.nr_events[PERF_RECORD_SAMPLE]);
+ session->stats.nr_invalid_chains,
+ session->stats.nr_events[PERF_RECORD_SAMPLE]);
}
- if (session->hists.stats.nr_unprocessable_samples != 0) {
+ if (session->stats.nr_unprocessable_samples != 0) {
ui__warning("%u unprocessable samples recorded.\n"
"Do you have a KVM guest running and not using 'perf kvm'?\n",
- session->hists.stats.nr_unprocessable_samples);
+ session->stats.nr_unprocessable_samples);
}
}
@@ -1369,6 +1163,18 @@
return event;
}
+/*
+ * On 64bit we can mmap the data file in one go. No need for tiny mmap
+ * slices. On 32bit we use 32MB.
+ */
+#if BITS_PER_LONG == 64
+#define MMAP_SIZE ULLONG_MAX
+#define NUM_MMAPS 1
+#else
+#define MMAP_SIZE (32 * 1024 * 1024ULL)
+#define NUM_MMAPS 128
+#endif
+
int __perf_session__process_events(struct perf_session *session,
u64 data_offset, u64 data_size,
u64 file_size, struct perf_tool *tool)
@@ -1376,7 +1182,7 @@
u64 head, page_offset, file_offset, file_pos, progress_next;
int err, mmap_prot, mmap_flags, map_idx = 0;
size_t mmap_size;
- char *buf, *mmaps[8];
+ char *buf, *mmaps[NUM_MMAPS];
union perf_event *event;
uint32_t size;
@@ -1391,7 +1197,7 @@
progress_next = file_size / 16;
- mmap_size = session->mmap_window;
+ mmap_size = MMAP_SIZE;
if (mmap_size > file_size)
mmap_size = file_size;
@@ -1526,16 +1332,13 @@
size_t perf_session__fprintf_dsos(struct perf_session *self, FILE *fp)
{
- return __dsos__fprintf(&self->host_machine.kernel_dsos, fp) +
- __dsos__fprintf(&self->host_machine.user_dsos, fp) +
- machines__fprintf_dsos(&self->machines, fp);
+ return machines__fprintf_dsos(&self->machines, fp);
}
size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, FILE *fp,
- bool with_hits)
+ bool (skip)(struct dso *dso, int parm), int parm)
{
- size_t ret = machine__fprintf_dsos_buildid(&self->host_machine, fp, with_hits);
- return ret + machines__fprintf_dsos_buildid(&self->machines, fp, with_hits);
+ return machines__fprintf_dsos_buildid(&self->machines, fp, skip, parm);
}
size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp)
@@ -1543,11 +1346,11 @@
struct perf_evsel *pos;
size_t ret = fprintf(fp, "Aggregated stats:\n");
- ret += hists__fprintf_nr_events(&session->hists, fp);
+ ret += events_stats__fprintf(&session->stats, fp);
list_for_each_entry(pos, &session->evlist->entries, node) {
ret += fprintf(fp, "%s stats:\n", perf_evsel__name(pos));
- ret += hists__fprintf_nr_events(&pos->hists, fp);
+ ret += events_stats__fprintf(&pos->hists.stats, fp);
}
return ret;
@@ -1559,7 +1362,7 @@
* FIXME: Here we have to actually print all the machines in this
* session, not just the host...
*/
- return machine__fprintf(&session->host_machine, fp);
+ return machine__fprintf(&session->machines.host, fp);
}
void perf_session__remove_thread(struct perf_session *session,
@@ -1568,10 +1371,10 @@
/*
* FIXME: This one makes no sense, we need to remove the thread from
* the machine it belongs to, perf_session can have many machines, so
- * doing it always on ->host_machine is wrong. Fix when auditing all
+ * doing it always on ->machines.host is wrong. Fix when auditing all
* the 'perf kvm' code.
*/
- machine__remove_thread(&session->host_machine, th);
+ machine__remove_thread(&session->machines.host, th);
}
struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index cea133a..b5c0847 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -30,16 +30,10 @@
struct perf_session {
struct perf_header header;
unsigned long size;
- unsigned long mmap_window;
- struct machine host_machine;
- struct rb_root machines;
+ struct machines machines;
struct perf_evlist *evlist;
struct pevent *pevent;
- /*
- * FIXME: Need to split this up further, we need global
- * stats + per event stats.
- */
- struct hists hists;
+ struct events_stats stats;
int fd;
bool fd_pipe;
bool repipe;
@@ -54,7 +48,7 @@
struct perf_session *perf_session__new(const char *filename, int mode,
bool force, bool repipe,
struct perf_tool *tool);
-void perf_session__delete(struct perf_session *self);
+void perf_session__delete(struct perf_session *session);
void perf_event_header__bswap(struct perf_event_header *self);
@@ -81,43 +75,24 @@
void perf_session__remove_thread(struct perf_session *self, struct thread *th);
static inline
-struct machine *perf_session__find_host_machine(struct perf_session *self)
-{
- return &self->host_machine;
-}
-
-static inline
struct machine *perf_session__find_machine(struct perf_session *self, pid_t pid)
{
- if (pid == HOST_KERNEL_ID)
- return &self->host_machine;
return machines__find(&self->machines, pid);
}
static inline
struct machine *perf_session__findnew_machine(struct perf_session *self, pid_t pid)
{
- if (pid == HOST_KERNEL_ID)
- return &self->host_machine;
return machines__findnew(&self->machines, pid);
}
-static inline
-void perf_session__process_machines(struct perf_session *self,
- struct perf_tool *tool,
- machine__process_t process)
-{
- process(&self->host_machine, tool);
- return machines__process(&self->machines, process, tool);
-}
-
struct thread *perf_session__findnew(struct perf_session *self, pid_t pid);
size_t perf_session__fprintf(struct perf_session *self, FILE *fp);
size_t perf_session__fprintf_dsos(struct perf_session *self, FILE *fp);
-size_t perf_session__fprintf_dsos_buildid(struct perf_session *self,
- FILE *fp, bool with_hits);
+size_t perf_session__fprintf_dsos_buildid(struct perf_session *session, FILE *fp,
+ bool (fn)(struct dso *dso, int parm), int parm);
size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp);
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index cfd1c0f..d41926c 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -60,7 +60,7 @@
static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf,
size_t size, unsigned int width)
{
- return repsep_snprintf(bf, size, "%*s:%5d", width,
+ return repsep_snprintf(bf, size, "%*s:%5d", width - 6,
self->thread->comm ?: "", self->thread->pid);
}
@@ -97,6 +97,16 @@
return repsep_snprintf(bf, size, "%*s", width, self->thread->comm);
}
+struct sort_entry sort_comm = {
+ .se_header = "Command",
+ .se_cmp = sort__comm_cmp,
+ .se_collapse = sort__comm_collapse,
+ .se_snprintf = hist_entry__comm_snprintf,
+ .se_width_idx = HISTC_COMM,
+};
+
+/* --sort dso */
+
static int64_t _sort__dso_cmp(struct map *map_l, struct map *map_r)
{
struct dso *dso_l = map_l ? map_l->dso : NULL;
@@ -117,40 +127,12 @@
return strcmp(dso_name_l, dso_name_r);
}
-struct sort_entry sort_comm = {
- .se_header = "Command",
- .se_cmp = sort__comm_cmp,
- .se_collapse = sort__comm_collapse,
- .se_snprintf = hist_entry__comm_snprintf,
- .se_width_idx = HISTC_COMM,
-};
-
-/* --sort dso */
-
static int64_t
sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
{
return _sort__dso_cmp(left->ms.map, right->ms.map);
}
-
-static int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r,
- u64 ip_l, u64 ip_r)
-{
- if (!sym_l || !sym_r)
- return cmp_null(sym_l, sym_r);
-
- if (sym_l == sym_r)
- return 0;
-
- if (sym_l)
- ip_l = sym_l->start;
- if (sym_r)
- ip_r = sym_r->start;
-
- return (int64_t)(ip_r - ip_l);
-}
-
static int _hist_entry__dso_snprintf(struct map *map, char *bf,
size_t size, unsigned int width)
{
@@ -169,9 +151,43 @@
return _hist_entry__dso_snprintf(self->ms.map, bf, size, width);
}
+struct sort_entry sort_dso = {
+ .se_header = "Shared Object",
+ .se_cmp = sort__dso_cmp,
+ .se_snprintf = hist_entry__dso_snprintf,
+ .se_width_idx = HISTC_DSO,
+};
+
+/* --sort symbol */
+
+static int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r)
+{
+ u64 ip_l, ip_r;
+
+ if (!sym_l || !sym_r)
+ return cmp_null(sym_l, sym_r);
+
+ if (sym_l == sym_r)
+ return 0;
+
+ ip_l = sym_l->start;
+ ip_r = sym_r->start;
+
+ return (int64_t)(ip_r - ip_l);
+}
+
+static int64_t
+sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+ if (!left->ms.sym && !right->ms.sym)
+ return right->level - left->level;
+
+ return _sort__sym_cmp(left->ms.sym, right->ms.sym);
+}
+
static int _hist_entry__sym_snprintf(struct map *map, struct symbol *sym,
u64 ip, char level, char *bf, size_t size,
- unsigned int width __maybe_unused)
+ unsigned int width)
{
size_t ret = 0;
@@ -197,43 +213,13 @@
return ret;
}
-
-struct sort_entry sort_dso = {
- .se_header = "Shared Object",
- .se_cmp = sort__dso_cmp,
- .se_snprintf = hist_entry__dso_snprintf,
- .se_width_idx = HISTC_DSO,
-};
-
static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
- size_t size,
- unsigned int width __maybe_unused)
+ size_t size, unsigned int width)
{
return _hist_entry__sym_snprintf(self->ms.map, self->ms.sym, self->ip,
self->level, bf, size, width);
}
-/* --sort symbol */
-static int64_t
-sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
-{
- u64 ip_l, ip_r;
-
- if (!left->ms.sym && !right->ms.sym)
- return right->level - left->level;
-
- if (!left->ms.sym || !right->ms.sym)
- return cmp_null(left->ms.sym, right->ms.sym);
-
- if (left->ms.sym == right->ms.sym)
- return 0;
-
- ip_l = left->ms.sym->start;
- ip_r = right->ms.sym->start;
-
- return _sort__sym_cmp(left->ms.sym, right->ms.sym, ip_l, ip_r);
-}
-
struct sort_entry sort_sym = {
.se_header = "Symbol",
.se_cmp = sort__sym_cmp,
@@ -253,7 +239,7 @@
size_t size,
unsigned int width __maybe_unused)
{
- FILE *fp;
+ FILE *fp = NULL;
char cmd[PATH_MAX + 2], *path = self->srcline, *nl;
size_t line_len;
@@ -274,7 +260,6 @@
if (getline(&path, &line_len, fp) < 0 || !line_len)
goto out_ip;
- fclose(fp);
self->srcline = strdup(path);
if (self->srcline == NULL)
goto out_ip;
@@ -284,8 +269,12 @@
*nl = '\0';
path = self->srcline;
out_path:
+ if (fp)
+ pclose(fp);
return repsep_snprintf(bf, size, "%s", path);
out_ip:
+ if (fp)
+ pclose(fp);
return repsep_snprintf(bf, size, "%-#*llx", BITS_PER_LONG / 4, self->ip);
}
@@ -335,7 +324,7 @@
static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
size_t size, unsigned int width)
{
- return repsep_snprintf(bf, size, "%-*d", width, self->cpu);
+ return repsep_snprintf(bf, size, "%*d", width, self->cpu);
}
struct sort_entry sort_cpu = {
@@ -345,6 +334,8 @@
.se_width_idx = HISTC_CPU,
};
+/* sort keys for branch stacks */
+
static int64_t
sort__dso_from_cmp(struct hist_entry *left, struct hist_entry *right)
{
@@ -359,13 +350,6 @@
bf, size, width);
}
-struct sort_entry sort_dso_from = {
- .se_header = "Source Shared Object",
- .se_cmp = sort__dso_from_cmp,
- .se_snprintf = hist_entry__dso_from_snprintf,
- .se_width_idx = HISTC_DSO_FROM,
-};
-
static int64_t
sort__dso_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
@@ -389,8 +373,7 @@
if (!from_l->sym && !from_r->sym)
return right->level - left->level;
- return _sort__sym_cmp(from_l->sym, from_r->sym, from_l->addr,
- from_r->addr);
+ return _sort__sym_cmp(from_l->sym, from_r->sym);
}
static int64_t
@@ -402,12 +385,11 @@
if (!to_l->sym && !to_r->sym)
return right->level - left->level;
- return _sort__sym_cmp(to_l->sym, to_r->sym, to_l->addr, to_r->addr);
+ return _sort__sym_cmp(to_l->sym, to_r->sym);
}
static int hist_entry__sym_from_snprintf(struct hist_entry *self, char *bf,
- size_t size,
- unsigned int width __maybe_unused)
+ size_t size, unsigned int width)
{
struct addr_map_symbol *from = &self->branch_info->from;
return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
@@ -416,8 +398,7 @@
}
static int hist_entry__sym_to_snprintf(struct hist_entry *self, char *bf,
- size_t size,
- unsigned int width __maybe_unused)
+ size_t size, unsigned int width)
{
struct addr_map_symbol *to = &self->branch_info->to;
return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
@@ -425,6 +406,13 @@
}
+struct sort_entry sort_dso_from = {
+ .se_header = "Source Shared Object",
+ .se_cmp = sort__dso_from_cmp,
+ .se_snprintf = hist_entry__dso_from_snprintf,
+ .se_width_idx = HISTC_DSO_FROM,
+};
+
struct sort_entry sort_dso_to = {
.se_header = "Target Shared Object",
.se_cmp = sort__dso_to_cmp,
@@ -484,30 +472,40 @@
#define DIM(d, n, func) [d] = { .name = n, .entry = &(func) }
-static struct sort_dimension sort_dimensions[] = {
+static struct sort_dimension common_sort_dimensions[] = {
DIM(SORT_PID, "pid", sort_thread),
DIM(SORT_COMM, "comm", sort_comm),
DIM(SORT_DSO, "dso", sort_dso),
- DIM(SORT_DSO_FROM, "dso_from", sort_dso_from),
- DIM(SORT_DSO_TO, "dso_to", sort_dso_to),
DIM(SORT_SYM, "symbol", sort_sym),
- DIM(SORT_SYM_TO, "symbol_from", sort_sym_from),
- DIM(SORT_SYM_FROM, "symbol_to", sort_sym_to),
DIM(SORT_PARENT, "parent", sort_parent),
DIM(SORT_CPU, "cpu", sort_cpu),
- DIM(SORT_MISPREDICT, "mispredict", sort_mispredict),
DIM(SORT_SRCLINE, "srcline", sort_srcline),
};
+#undef DIM
+
+#define DIM(d, n, func) [d - __SORT_BRANCH_STACK] = { .name = n, .entry = &(func) }
+
+static struct sort_dimension bstack_sort_dimensions[] = {
+ DIM(SORT_DSO_FROM, "dso_from", sort_dso_from),
+ DIM(SORT_DSO_TO, "dso_to", sort_dso_to),
+ DIM(SORT_SYM_FROM, "symbol_from", sort_sym_from),
+ DIM(SORT_SYM_TO, "symbol_to", sort_sym_to),
+ DIM(SORT_MISPREDICT, "mispredict", sort_mispredict),
+};
+
+#undef DIM
+
int sort_dimension__add(const char *tok)
{
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
- struct sort_dimension *sd = &sort_dimensions[i];
+ for (i = 0; i < ARRAY_SIZE(common_sort_dimensions); i++) {
+ struct sort_dimension *sd = &common_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
+
if (sd->entry == &sort_parent) {
int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
if (ret) {
@@ -518,9 +516,7 @@
return -EINVAL;
}
sort__has_parent = 1;
- } else if (sd->entry == &sort_sym ||
- sd->entry == &sort_sym_from ||
- sd->entry == &sort_sym_to) {
+ } else if (sd->entry == &sort_sym) {
sort__has_sym = 1;
}
@@ -530,52 +526,69 @@
if (sd->entry->se_collapse)
sort__need_collapse = 1;
- if (list_empty(&hist_entry__sort_list)) {
- if (!strcmp(sd->name, "pid"))
- sort__first_dimension = SORT_PID;
- else if (!strcmp(sd->name, "comm"))
- sort__first_dimension = SORT_COMM;
- else if (!strcmp(sd->name, "dso"))
- sort__first_dimension = SORT_DSO;
- else if (!strcmp(sd->name, "symbol"))
- sort__first_dimension = SORT_SYM;
- else if (!strcmp(sd->name, "parent"))
- sort__first_dimension = SORT_PARENT;
- else if (!strcmp(sd->name, "cpu"))
- sort__first_dimension = SORT_CPU;
- else if (!strcmp(sd->name, "symbol_from"))
- sort__first_dimension = SORT_SYM_FROM;
- else if (!strcmp(sd->name, "symbol_to"))
- sort__first_dimension = SORT_SYM_TO;
- else if (!strcmp(sd->name, "dso_from"))
- sort__first_dimension = SORT_DSO_FROM;
- else if (!strcmp(sd->name, "dso_to"))
- sort__first_dimension = SORT_DSO_TO;
- else if (!strcmp(sd->name, "mispredict"))
- sort__first_dimension = SORT_MISPREDICT;
- }
+ if (list_empty(&hist_entry__sort_list))
+ sort__first_dimension = i;
list_add_tail(&sd->entry->list, &hist_entry__sort_list);
sd->taken = 1;
return 0;
}
+
+ for (i = 0; i < ARRAY_SIZE(bstack_sort_dimensions); i++) {
+ struct sort_dimension *sd = &bstack_sort_dimensions[i];
+
+ if (strncasecmp(tok, sd->name, strlen(tok)))
+ continue;
+
+ if (sort__branch_mode != 1)
+ return -EINVAL;
+
+ if (sd->entry == &sort_sym_from || sd->entry == &sort_sym_to)
+ sort__has_sym = 1;
+
+ if (sd->taken)
+ return 0;
+
+ if (sd->entry->se_collapse)
+ sort__need_collapse = 1;
+
+ if (list_empty(&hist_entry__sort_list))
+ sort__first_dimension = i + __SORT_BRANCH_STACK;
+
+ list_add_tail(&sd->entry->list, &hist_entry__sort_list);
+ sd->taken = 1;
+
+ return 0;
+ }
+
return -ESRCH;
}
-void setup_sorting(const char * const usagestr[], const struct option *opts)
+int setup_sorting(void)
{
char *tmp, *tok, *str = strdup(sort_order);
+ int ret = 0;
+
+ if (str == NULL) {
+ error("Not enough memory to setup sort keys");
+ return -ENOMEM;
+ }
for (tok = strtok_r(str, ", ", &tmp);
tok; tok = strtok_r(NULL, ", ", &tmp)) {
- if (sort_dimension__add(tok) < 0) {
+ ret = sort_dimension__add(tok);
+ if (ret == -EINVAL) {
+ error("Invalid --sort key: `%s'", tok);
+ break;
+ } else if (ret == -ESRCH) {
error("Unknown --sort key: `%s'", tok);
- usage_with_options(usagestr, opts);
+ break;
}
}
free(str);
+ return ret;
}
void sort_entry__setup_elide(struct sort_entry *self, struct strlist *list,
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index b4e8c3b..b13e56f 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -55,9 +55,6 @@
struct hist_entry_diff {
bool computed;
- /* PERF_HPP__DISPL */
- int displacement;
-
/* PERF_HPP__DELTA */
double period_ratio_delta;
@@ -118,25 +115,29 @@
return NULL;
}
-static inline void hist__entry_add_pair(struct hist_entry *he,
+static inline void hist_entry__add_pair(struct hist_entry *he,
struct hist_entry *pair)
{
list_add_tail(&he->pairs.head, &pair->pairs.node);
}
enum sort_type {
+ /* common sort keys */
SORT_PID,
SORT_COMM,
SORT_DSO,
SORT_SYM,
SORT_PARENT,
SORT_CPU,
- SORT_DSO_FROM,
+ SORT_SRCLINE,
+
+ /* branch stack specific sort keys */
+ __SORT_BRANCH_STACK,
+ SORT_DSO_FROM = __SORT_BRANCH_STACK,
SORT_DSO_TO,
SORT_SYM_FROM,
SORT_SYM_TO,
SORT_MISPREDICT,
- SORT_SRCLINE,
};
/*
@@ -159,7 +160,7 @@
extern struct sort_entry sort_thread;
extern struct list_head hist_entry__sort_list;
-void setup_sorting(const char * const usagestr[], const struct option *opts);
+int setup_sorting(void);
extern int sort_dimension__add(const char *);
void sort_entry__setup_elide(struct sort_entry *self, struct strlist *list,
const char *list_name, FILE *fp);
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index 346707d..29c7b2c 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -332,6 +332,24 @@
}
/**
+ * ltrim - Removes leading whitespace from @s.
+ * @s: The string to be stripped.
+ *
+ * Return pointer to the first non-whitespace character in @s.
+ */
+char *ltrim(char *s)
+{
+ int len = strlen(s);
+
+ while (len && isspace(*s)) {
+ len--;
+ s++;
+ }
+
+ return s;
+}
+
+/**
* rtrim - Removes trailing whitespace from @s.
* @s: The string to be stripped.
*
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
index 155d8b7..55433aa4 100644
--- a/tools/perf/util/strlist.c
+++ b/tools/perf/util/strlist.c
@@ -35,11 +35,11 @@
return NULL;
}
-static void str_node__delete(struct str_node *self, bool dupstr)
+static void str_node__delete(struct str_node *snode, bool dupstr)
{
if (dupstr)
- free((void *)self->s);
- free(self);
+ free((void *)snode->s);
+ free(snode);
}
static
@@ -59,12 +59,12 @@
return strcmp(snode->s, str);
}
-int strlist__add(struct strlist *self, const char *new_entry)
+int strlist__add(struct strlist *slist, const char *new_entry)
{
- return rblist__add_node(&self->rblist, new_entry);
+ return rblist__add_node(&slist->rblist, new_entry);
}
-int strlist__load(struct strlist *self, const char *filename)
+int strlist__load(struct strlist *slist, const char *filename)
{
char entry[1024];
int err;
@@ -80,7 +80,7 @@
continue;
entry[len - 1] = '\0';
- err = strlist__add(self, entry);
+ err = strlist__add(slist, entry);
if (err != 0)
goto out;
}
@@ -107,56 +107,56 @@
return snode;
}
-static int strlist__parse_list_entry(struct strlist *self, const char *s)
+static int strlist__parse_list_entry(struct strlist *slist, const char *s)
{
if (strncmp(s, "file://", 7) == 0)
- return strlist__load(self, s + 7);
+ return strlist__load(slist, s + 7);
- return strlist__add(self, s);
+ return strlist__add(slist, s);
}
-int strlist__parse_list(struct strlist *self, const char *s)
+int strlist__parse_list(struct strlist *slist, const char *s)
{
char *sep;
int err;
while ((sep = strchr(s, ',')) != NULL) {
*sep = '\0';
- err = strlist__parse_list_entry(self, s);
+ err = strlist__parse_list_entry(slist, s);
*sep = ',';
if (err != 0)
return err;
s = sep + 1;
}
- return *s ? strlist__parse_list_entry(self, s) : 0;
+ return *s ? strlist__parse_list_entry(slist, s) : 0;
}
-struct strlist *strlist__new(bool dupstr, const char *slist)
+struct strlist *strlist__new(bool dupstr, const char *list)
{
- struct strlist *self = malloc(sizeof(*self));
+ struct strlist *slist = malloc(sizeof(*slist));
- if (self != NULL) {
- rblist__init(&self->rblist);
- self->rblist.node_cmp = strlist__node_cmp;
- self->rblist.node_new = strlist__node_new;
- self->rblist.node_delete = strlist__node_delete;
+ if (slist != NULL) {
+ rblist__init(&slist->rblist);
+ slist->rblist.node_cmp = strlist__node_cmp;
+ slist->rblist.node_new = strlist__node_new;
+ slist->rblist.node_delete = strlist__node_delete;
- self->dupstr = dupstr;
- if (slist && strlist__parse_list(self, slist) != 0)
+ slist->dupstr = dupstr;
+ if (slist && strlist__parse_list(slist, list) != 0)
goto out_error;
}
- return self;
+ return slist;
out_error:
- free(self);
+ free(slist);
return NULL;
}
-void strlist__delete(struct strlist *self)
+void strlist__delete(struct strlist *slist)
{
- if (self != NULL)
- rblist__delete(&self->rblist);
+ if (slist != NULL)
+ rblist__delete(&slist->rblist);
}
struct str_node *strlist__entry(const struct strlist *slist, unsigned int idx)
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
index dd9f922..5c7f870 100644
--- a/tools/perf/util/strlist.h
+++ b/tools/perf/util/strlist.h
@@ -17,34 +17,34 @@
};
struct strlist *strlist__new(bool dupstr, const char *slist);
-void strlist__delete(struct strlist *self);
+void strlist__delete(struct strlist *slist);
-void strlist__remove(struct strlist *self, struct str_node *sn);
-int strlist__load(struct strlist *self, const char *filename);
-int strlist__add(struct strlist *self, const char *str);
+void strlist__remove(struct strlist *slist, struct str_node *sn);
+int strlist__load(struct strlist *slist, const char *filename);
+int strlist__add(struct strlist *slist, const char *str);
-struct str_node *strlist__entry(const struct strlist *self, unsigned int idx);
-struct str_node *strlist__find(struct strlist *self, const char *entry);
+struct str_node *strlist__entry(const struct strlist *slist, unsigned int idx);
+struct str_node *strlist__find(struct strlist *slist, const char *entry);
-static inline bool strlist__has_entry(struct strlist *self, const char *entry)
+static inline bool strlist__has_entry(struct strlist *slist, const char *entry)
{
- return strlist__find(self, entry) != NULL;
+ return strlist__find(slist, entry) != NULL;
}
-static inline bool strlist__empty(const struct strlist *self)
+static inline bool strlist__empty(const struct strlist *slist)
{
- return rblist__empty(&self->rblist);
+ return rblist__empty(&slist->rblist);
}
-static inline unsigned int strlist__nr_entries(const struct strlist *self)
+static inline unsigned int strlist__nr_entries(const struct strlist *slist)
{
- return rblist__nr_entries(&self->rblist);
+ return rblist__nr_entries(&slist->rblist);
}
/* For strlist iteration */
-static inline struct str_node *strlist__first(struct strlist *self)
+static inline struct str_node *strlist__first(struct strlist *slist)
{
- struct rb_node *rn = rb_first(&self->rblist.entries);
+ struct rb_node *rn = rb_first(&slist->rblist.entries);
return rn ? rb_entry(rn, struct str_node, rb_node) : NULL;
}
static inline struct str_node *strlist__next(struct str_node *sn)
@@ -59,21 +59,21 @@
/**
* strlist_for_each - iterate over a strlist
* @pos: the &struct str_node to use as a loop cursor.
- * @self: the &struct strlist for loop.
+ * @slist: the &struct strlist for loop.
*/
-#define strlist__for_each(pos, self) \
- for (pos = strlist__first(self); pos; pos = strlist__next(pos))
+#define strlist__for_each(pos, slist) \
+ for (pos = strlist__first(slist); pos; pos = strlist__next(pos))
/**
* strlist_for_each_safe - iterate over a strlist safe against removal of
* str_node
* @pos: the &struct str_node to use as a loop cursor.
* @n: another &struct str_node to use as temporary storage.
- * @self: the &struct strlist for loop.
+ * @slist: the &struct strlist for loop.
*/
-#define strlist__for_each_safe(pos, n, self) \
- for (pos = strlist__first(self), n = strlist__next(pos); pos;\
+#define strlist__for_each_safe(pos, n, slist) \
+ for (pos = strlist__first(slist), n = strlist__next(pos); pos;\
pos = n, n = strlist__next(n))
-int strlist__parse_list(struct strlist *self, const char *s);
+int strlist__parse_list(struct strlist *slist, const char *s);
#endif /* __PERF_STRLIST_H */
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index db0cc92..54efcb5 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1,6 +1,3 @@
-#include <libelf.h>
-#include <gelf.h>
-#include <elf.h>
#include <fcntl.h>
#include <stdio.h>
#include <errno.h>
@@ -718,6 +715,17 @@
sym.st_value);
used_opd = true;
}
+ /*
+ * When loading symbols in a data mapping, ABS symbols (which
+ * has a value of SHN_ABS in its st_shndx) failed at
+ * elf_getscn(). And it marks the loading as a failure so
+ * already loaded symbols cannot be fixed up.
+ *
+ * I'm not sure what should be done. Just ignore them for now.
+ * - Namhyung Kim
+ */
+ if (sym.st_shndx == SHN_ABS)
+ continue;
sec = elf_getscn(runtime_ss->elf, sym.st_shndx);
if (!sec)
diff --git a/tools/perf/util/symbol-minimal.c b/tools/perf/util/symbol-minimal.c
index 259f8f2..a7390cd 100644
--- a/tools/perf/util/symbol-minimal.c
+++ b/tools/perf/util/symbol-minimal.c
@@ -1,6 +1,5 @@
#include "symbol.h"
-#include <elf.h>
#include <stdio.h>
#include <fcntl.h>
#include <string.h>
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 295f8d4..e6432d8 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -28,8 +28,8 @@
symbol_filter_t filter);
static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map,
symbol_filter_t filter);
-static int vmlinux_path__nr_entries;
-static char **vmlinux_path;
+int vmlinux_path__nr_entries;
+char **vmlinux_path;
struct symbol_conf symbol_conf = {
.exclude_other = true,
@@ -202,13 +202,6 @@
curr->end = ~0ULL;
}
-static void map_groups__fixup_end(struct map_groups *mg)
-{
- int i;
- for (i = 0; i < MAP__NR_TYPES; ++i)
- __map_groups__fixup_end(mg, i);
-}
-
struct symbol *symbol__new(u64 start, u64 len, u8 binding, const char *name)
{
size_t namelen = strlen(name) + 1;
@@ -652,8 +645,8 @@
return count + moved;
}
-static bool symbol__restricted_filename(const char *filename,
- const char *restricted_filename)
+bool symbol__restricted_filename(const char *filename,
+ const char *restricted_filename)
{
bool restricted = false;
@@ -775,10 +768,6 @@
else
machine = NULL;
- name = malloc(PATH_MAX);
- if (!name)
- return -1;
-
dso->adjust_symbols = 0;
if (strncmp(dso->name, "/tmp/perf-", 10) == 0) {
@@ -802,6 +791,10 @@
if (machine)
root_dir = machine->root_dir;
+ name = malloc(PATH_MAX);
+ if (!name)
+ return -1;
+
/* Iterate over candidate debug images.
* Keep track of "interesting" ones (those which have a symtab, dynsym,
* and/or opd section) for processing.
@@ -887,200 +880,6 @@
return NULL;
}
-static int map_groups__set_modules_path_dir(struct map_groups *mg,
- const char *dir_name)
-{
- struct dirent *dent;
- DIR *dir = opendir(dir_name);
- int ret = 0;
-
- if (!dir) {
- pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
- return -1;
- }
-
- while ((dent = readdir(dir)) != NULL) {
- char path[PATH_MAX];
- struct stat st;
-
- /*sshfs might return bad dent->d_type, so we have to stat*/
- snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
- if (stat(path, &st))
- continue;
-
- if (S_ISDIR(st.st_mode)) {
- if (!strcmp(dent->d_name, ".") ||
- !strcmp(dent->d_name, ".."))
- continue;
-
- ret = map_groups__set_modules_path_dir(mg, path);
- if (ret < 0)
- goto out;
- } else {
- char *dot = strrchr(dent->d_name, '.'),
- dso_name[PATH_MAX];
- struct map *map;
- char *long_name;
-
- if (dot == NULL || strcmp(dot, ".ko"))
- continue;
- snprintf(dso_name, sizeof(dso_name), "[%.*s]",
- (int)(dot - dent->d_name), dent->d_name);
-
- strxfrchar(dso_name, '-', '_');
- map = map_groups__find_by_name(mg, MAP__FUNCTION,
- dso_name);
- if (map == NULL)
- continue;
-
- long_name = strdup(path);
- if (long_name == NULL) {
- ret = -1;
- goto out;
- }
- dso__set_long_name(map->dso, long_name);
- map->dso->lname_alloc = 1;
- dso__kernel_module_get_build_id(map->dso, "");
- }
- }
-
-out:
- closedir(dir);
- return ret;
-}
-
-static char *get_kernel_version(const char *root_dir)
-{
- char version[PATH_MAX];
- FILE *file;
- char *name, *tmp;
- const char *prefix = "Linux version ";
-
- sprintf(version, "%s/proc/version", root_dir);
- file = fopen(version, "r");
- if (!file)
- return NULL;
-
- version[0] = '\0';
- tmp = fgets(version, sizeof(version), file);
- fclose(file);
-
- name = strstr(version, prefix);
- if (!name)
- return NULL;
- name += strlen(prefix);
- tmp = strchr(name, ' ');
- if (tmp)
- *tmp = '\0';
-
- return strdup(name);
-}
-
-static int machine__set_modules_path(struct machine *machine)
-{
- char *version;
- char modules_path[PATH_MAX];
-
- version = get_kernel_version(machine->root_dir);
- if (!version)
- return -1;
-
- snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s/kernel",
- machine->root_dir, version);
- free(version);
-
- return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
-}
-
-struct map *machine__new_module(struct machine *machine, u64 start,
- const char *filename)
-{
- struct map *map;
- struct dso *dso = __dsos__findnew(&machine->kernel_dsos, filename);
-
- if (dso == NULL)
- return NULL;
-
- map = map__new2(start, dso, MAP__FUNCTION);
- if (map == NULL)
- return NULL;
-
- if (machine__is_host(machine))
- dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE;
- else
- dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE;
- map_groups__insert(&machine->kmaps, map);
- return map;
-}
-
-static int machine__create_modules(struct machine *machine)
-{
- char *line = NULL;
- size_t n;
- FILE *file;
- struct map *map;
- const char *modules;
- char path[PATH_MAX];
-
- if (machine__is_default_guest(machine))
- modules = symbol_conf.default_guest_modules;
- else {
- sprintf(path, "%s/proc/modules", machine->root_dir);
- modules = path;
- }
-
- if (symbol__restricted_filename(path, "/proc/modules"))
- return -1;
-
- file = fopen(modules, "r");
- if (file == NULL)
- return -1;
-
- while (!feof(file)) {
- char name[PATH_MAX];
- u64 start;
- char *sep;
- int line_len;
-
- line_len = getline(&line, &n, file);
- if (line_len < 0)
- break;
-
- if (!line)
- goto out_failure;
-
- line[--line_len] = '\0'; /* \n */
-
- sep = strrchr(line, 'x');
- if (sep == NULL)
- continue;
-
- hex2u64(sep + 1, &start);
-
- sep = strchr(line, ' ');
- if (sep == NULL)
- continue;
-
- *sep = '\0';
-
- snprintf(name, sizeof(name), "[%s]", line);
- map = machine__new_module(machine, start, name);
- if (map == NULL)
- goto out_delete_line;
- dso__kernel_module_get_build_id(map->dso, machine->root_dir);
- }
-
- free(line);
- fclose(file);
-
- return machine__set_modules_path(machine);
-
-out_delete_line:
- free(line);
-out_failure:
- return -1;
-}
-
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, symbol_filter_t filter)
{
@@ -1124,8 +923,10 @@
filename = dso__build_id_filename(dso, NULL, 0);
if (filename != NULL) {
err = dso__load_vmlinux(dso, map, filename, filter);
- if (err > 0)
+ if (err > 0) {
+ dso->lname_alloc = 1;
goto out;
+ }
free(filename);
}
@@ -1133,6 +934,7 @@
err = dso__load_vmlinux(dso, map, vmlinux_path[i], filter);
if (err > 0) {
dso__set_long_name(dso, strdup(vmlinux_path[i]));
+ dso->lname_alloc = 1;
break;
}
}
@@ -1172,6 +974,7 @@
if (err > 0) {
dso__set_long_name(dso,
strdup(symbol_conf.vmlinux_name));
+ dso->lname_alloc = 1;
goto out_fixup;
}
return err;
@@ -1300,195 +1103,6 @@
return err;
}
-size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp)
-{
- struct rb_node *nd;
- size_t ret = 0;
-
- for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret += __dsos__fprintf(&pos->kernel_dsos, fp);
- ret += __dsos__fprintf(&pos->user_dsos, fp);
- }
-
- return ret;
-}
-
-size_t machine__fprintf_dsos_buildid(struct machine *machine, FILE *fp,
- bool with_hits)
-{
- return __dsos__fprintf_buildid(&machine->kernel_dsos, fp, with_hits) +
- __dsos__fprintf_buildid(&machine->user_dsos, fp, with_hits);
-}
-
-size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
- FILE *fp, bool with_hits)
-{
- struct rb_node *nd;
- size_t ret = 0;
-
- for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret += machine__fprintf_dsos_buildid(pos, fp, with_hits);
- }
- return ret;
-}
-
-static struct dso *machine__get_kernel(struct machine *machine)
-{
- const char *vmlinux_name = NULL;
- struct dso *kernel;
-
- if (machine__is_host(machine)) {
- vmlinux_name = symbol_conf.vmlinux_name;
- if (!vmlinux_name)
- vmlinux_name = "[kernel.kallsyms]";
-
- kernel = dso__kernel_findnew(machine, vmlinux_name,
- "[kernel]",
- DSO_TYPE_KERNEL);
- } else {
- char bf[PATH_MAX];
-
- if (machine__is_default_guest(machine))
- vmlinux_name = symbol_conf.default_guest_vmlinux_name;
- if (!vmlinux_name)
- vmlinux_name = machine__mmap_name(machine, bf,
- sizeof(bf));
-
- kernel = dso__kernel_findnew(machine, vmlinux_name,
- "[guest.kernel]",
- DSO_TYPE_GUEST_KERNEL);
- }
-
- if (kernel != NULL && (!kernel->has_build_id))
- dso__read_running_kernel_build_id(kernel, machine);
-
- return kernel;
-}
-
-struct process_args {
- u64 start;
-};
-
-static int symbol__in_kernel(void *arg, const char *name,
- char type __maybe_unused, u64 start)
-{
- struct process_args *args = arg;
-
- if (strchr(name, '['))
- return 0;
-
- args->start = start;
- return 1;
-}
-
-/* Figure out the start address of kernel map from /proc/kallsyms */
-static u64 machine__get_kernel_start_addr(struct machine *machine)
-{
- const char *filename;
- char path[PATH_MAX];
- struct process_args args;
-
- if (machine__is_host(machine)) {
- filename = "/proc/kallsyms";
- } else {
- if (machine__is_default_guest(machine))
- filename = (char *)symbol_conf.default_guest_kallsyms;
- else {
- sprintf(path, "%s/proc/kallsyms", machine->root_dir);
- filename = path;
- }
- }
-
- if (symbol__restricted_filename(filename, "/proc/kallsyms"))
- return 0;
-
- if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
- return 0;
-
- return args.start;
-}
-
-int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
-{
- enum map_type type;
- u64 start = machine__get_kernel_start_addr(machine);
-
- for (type = 0; type < MAP__NR_TYPES; ++type) {
- struct kmap *kmap;
-
- machine->vmlinux_maps[type] = map__new2(start, kernel, type);
- if (machine->vmlinux_maps[type] == NULL)
- return -1;
-
- machine->vmlinux_maps[type]->map_ip =
- machine->vmlinux_maps[type]->unmap_ip =
- identity__map_ip;
- kmap = map__kmap(machine->vmlinux_maps[type]);
- kmap->kmaps = &machine->kmaps;
- map_groups__insert(&machine->kmaps,
- machine->vmlinux_maps[type]);
- }
-
- return 0;
-}
-
-void machine__destroy_kernel_maps(struct machine *machine)
-{
- enum map_type type;
-
- for (type = 0; type < MAP__NR_TYPES; ++type) {
- struct kmap *kmap;
-
- if (machine->vmlinux_maps[type] == NULL)
- continue;
-
- kmap = map__kmap(machine->vmlinux_maps[type]);
- map_groups__remove(&machine->kmaps,
- machine->vmlinux_maps[type]);
- if (kmap->ref_reloc_sym) {
- /*
- * ref_reloc_sym is shared among all maps, so free just
- * on one of them.
- */
- if (type == MAP__FUNCTION) {
- free((char *)kmap->ref_reloc_sym->name);
- kmap->ref_reloc_sym->name = NULL;
- free(kmap->ref_reloc_sym);
- }
- kmap->ref_reloc_sym = NULL;
- }
-
- map__delete(machine->vmlinux_maps[type]);
- machine->vmlinux_maps[type] = NULL;
- }
-}
-
-int machine__create_kernel_maps(struct machine *machine)
-{
- struct dso *kernel = machine__get_kernel(machine);
-
- if (kernel == NULL ||
- __machine__create_kernel_maps(machine, kernel) < 0)
- return -1;
-
- if (symbol_conf.use_modules && machine__create_modules(machine) < 0) {
- if (machine__is_host(machine))
- pr_debug("Problems creating module maps, "
- "continuing anyway...\n");
- else
- pr_debug("Problems creating module maps for guest %d, "
- "continuing anyway...\n", machine->pid);
- }
-
- /*
- * Now that we have all the maps created, just set the ->end of them:
- */
- map_groups__fixup_end(&machine->kmaps);
- return 0;
-}
-
static void vmlinux_path__exit(void)
{
while (--vmlinux_path__nr_entries >= 0) {
@@ -1549,25 +1163,6 @@
return -1;
}
-size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp)
-{
- int i;
- size_t printed = 0;
- struct dso *kdso = machine->vmlinux_maps[MAP__FUNCTION]->dso;
-
- if (kdso->has_build_id) {
- char filename[PATH_MAX];
- if (dso__build_id_filename(kdso, filename, sizeof(filename)))
- printed += fprintf(fp, "[0] %s\n", filename);
- }
-
- for (i = 0; i < vmlinux_path__nr_entries; ++i)
- printed += fprintf(fp, "[%d] %s\n",
- i + kdso->has_build_id, vmlinux_path[i]);
-
- return printed;
-}
-
static int setup_list(struct strlist **list, const char *list_str,
const char *list_name)
{
@@ -1671,108 +1266,3 @@
symbol_conf.sym_list = symbol_conf.dso_list = symbol_conf.comm_list = NULL;
symbol_conf.initialized = false;
}
-
-int machines__create_kernel_maps(struct rb_root *machines, pid_t pid)
-{
- struct machine *machine = machines__findnew(machines, pid);
-
- if (machine == NULL)
- return -1;
-
- return machine__create_kernel_maps(machine);
-}
-
-int machines__create_guest_kernel_maps(struct rb_root *machines)
-{
- int ret = 0;
- struct dirent **namelist = NULL;
- int i, items = 0;
- char path[PATH_MAX];
- pid_t pid;
- char *endp;
-
- if (symbol_conf.default_guest_vmlinux_name ||
- symbol_conf.default_guest_modules ||
- symbol_conf.default_guest_kallsyms) {
- machines__create_kernel_maps(machines, DEFAULT_GUEST_KERNEL_ID);
- }
-
- if (symbol_conf.guestmount) {
- items = scandir(symbol_conf.guestmount, &namelist, NULL, NULL);
- if (items <= 0)
- return -ENOENT;
- for (i = 0; i < items; i++) {
- if (!isdigit(namelist[i]->d_name[0])) {
- /* Filter out . and .. */
- continue;
- }
- pid = (pid_t)strtol(namelist[i]->d_name, &endp, 10);
- if ((*endp != '\0') ||
- (endp == namelist[i]->d_name) ||
- (errno == ERANGE)) {
- pr_debug("invalid directory (%s). Skipping.\n",
- namelist[i]->d_name);
- continue;
- }
- sprintf(path, "%s/%s/proc/kallsyms",
- symbol_conf.guestmount,
- namelist[i]->d_name);
- ret = access(path, R_OK);
- if (ret) {
- pr_debug("Can't access file %s\n", path);
- goto failure;
- }
- machines__create_kernel_maps(machines, pid);
- }
-failure:
- free(namelist);
- }
-
- return ret;
-}
-
-void machines__destroy_guest_kernel_maps(struct rb_root *machines)
-{
- struct rb_node *next = rb_first(machines);
-
- while (next) {
- struct machine *pos = rb_entry(next, struct machine, rb_node);
-
- next = rb_next(&pos->rb_node);
- rb_erase(&pos->rb_node, machines);
- machine__delete(pos);
- }
-}
-
-int machine__load_kallsyms(struct machine *machine, const char *filename,
- enum map_type type, symbol_filter_t filter)
-{
- struct map *map = machine->vmlinux_maps[type];
- int ret = dso__load_kallsyms(map->dso, filename, map, filter);
-
- if (ret > 0) {
- dso__set_loaded(map->dso, type);
- /*
- * Since /proc/kallsyms will have multiple sessions for the
- * kernel, with modules between them, fixup the end of all
- * sections.
- */
- __map_groups__fixup_end(&machine->kmaps, type);
- }
-
- return ret;
-}
-
-int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
- symbol_filter_t filter)
-{
- struct map *map = machine->vmlinux_maps[type];
- int ret = dso__load_vmlinux_path(map->dso, map, filter);
-
- if (ret > 0) {
- dso__set_loaded(map->dso, type);
- map__reloc_vmlinux(map);
- }
-
- return ret;
-}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index de68f98..b62ca37 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -16,8 +16,8 @@
#ifdef LIBELF_SUPPORT
#include <libelf.h>
#include <gelf.h>
-#include <elf.h>
#endif
+#include <elf.h>
#include "dso.h"
@@ -96,7 +96,8 @@
initialized,
kptr_restrict,
annotate_asm_raw,
- annotate_src;
+ annotate_src,
+ event_group;
const char *vmlinux_name,
*kallsyms_name,
*source_prefix,
@@ -120,6 +121,8 @@
};
extern struct symbol_conf symbol_conf;
+extern int vmlinux_path__nr_entries;
+extern char **vmlinux_path;
static inline void *symbol__priv(struct symbol *sym)
{
@@ -223,6 +226,8 @@
size_t symbol__fprintf_symname(const struct symbol *sym, FILE *fp);
size_t symbol__fprintf(struct symbol *sym, FILE *fp);
bool symbol_type__is_a(char symbol_type, enum map_type map_type);
+bool symbol__restricted_filename(const char *filename,
+ const char *restricted_filename);
int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
struct symsrc *runtime_ss, symbol_filter_t filter,
diff --git a/tools/perf/util/sysfs.c b/tools/perf/util/sysfs.c
index 48c6902..f71e9ea 100644
--- a/tools/perf/util/sysfs.c
+++ b/tools/perf/util/sysfs.c
@@ -8,7 +8,7 @@
};
static int sysfs_found;
-char sysfs_mountpoint[PATH_MAX];
+char sysfs_mountpoint[PATH_MAX + 1];
static int sysfs_valid_mountpoint(const char *sysfs)
{
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index df59623..632e40e 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -54,10 +54,10 @@
return self->comm_len;
}
-static size_t thread__fprintf(struct thread *self, FILE *fp)
+size_t thread__fprintf(struct thread *thread, FILE *fp)
{
- return fprintf(fp, "Thread %d %s\n", self->pid, self->comm) +
- map_groups__fprintf(&self->mg, verbose, fp);
+ return fprintf(fp, "Thread %d %s\n", thread->pid, thread->comm) +
+ map_groups__fprintf(&thread->mg, verbose, fp);
}
void thread__insert_map(struct thread *self, struct map *map)
@@ -84,17 +84,3 @@
return -ENOMEM;
return 0;
}
-
-size_t machine__fprintf(struct machine *machine, FILE *fp)
-{
- size_t ret = 0;
- struct rb_node *nd;
-
- for (nd = rb_first(&machine->threads); nd; nd = rb_next(nd)) {
- struct thread *pos = rb_entry(nd, struct thread, rb_node);
-
- ret += thread__fprintf(pos, fp);
- }
-
- return ret;
-}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index f2fa17c..5ad2664 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -30,6 +30,7 @@
int thread__comm_len(struct thread *self);
void thread__insert_map(struct thread *self, struct map *map);
int thread__fork(struct thread *self, struct thread *parent);
+size_t thread__fprintf(struct thread *thread, FILE *fp);
static inline struct map *thread__find_map(struct thread *self,
enum map_type type, u64 addr)
diff --git a/tools/perf/util/top.c b/tools/perf/util/top.c
index 884dde9..54d37a4 100644
--- a/tools/perf/util/top.c
+++ b/tools/perf/util/top.c
@@ -26,6 +26,8 @@
float samples_per_sec = top->samples / top->delay_secs;
float ksamples_per_sec = top->kernel_samples / top->delay_secs;
float esamples_percent = (100.0 * top->exact_samples) / top->samples;
+ struct perf_record_opts *opts = &top->record_opts;
+ struct perf_target *target = &opts->target;
size_t ret = 0;
if (!perf_guest) {
@@ -61,31 +63,31 @@
struct perf_evsel *first = perf_evlist__first(top->evlist);
ret += SNPRINTF(bf + ret, size - ret, "%" PRIu64 "%s ",
(uint64_t)first->attr.sample_period,
- top->freq ? "Hz" : "");
+ opts->freq ? "Hz" : "");
}
ret += SNPRINTF(bf + ret, size - ret, "%s", perf_evsel__name(top->sym_evsel));
ret += SNPRINTF(bf + ret, size - ret, "], ");
- if (top->target.pid)
+ if (target->pid)
ret += SNPRINTF(bf + ret, size - ret, " (target_pid: %s",
- top->target.pid);
- else if (top->target.tid)
+ target->pid);
+ else if (target->tid)
ret += SNPRINTF(bf + ret, size - ret, " (target_tid: %s",
- top->target.tid);
- else if (top->target.uid_str != NULL)
+ target->tid);
+ else if (target->uid_str != NULL)
ret += SNPRINTF(bf + ret, size - ret, " (uid: %s",
- top->target.uid_str);
+ target->uid_str);
else
ret += SNPRINTF(bf + ret, size - ret, " (all");
- if (top->target.cpu_list)
+ if (target->cpu_list)
ret += SNPRINTF(bf + ret, size - ret, ", CPU%s: %s)",
top->evlist->cpus->nr > 1 ? "s" : "",
- top->target.cpu_list);
+ target->cpu_list);
else {
- if (top->target.tid)
+ if (target->tid)
ret += SNPRINTF(bf + ret, size - ret, ")");
else
ret += SNPRINTF(bf + ret, size - ret, ", %d CPU%s)",
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index 86ff1b1..7ebf357 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -14,7 +14,7 @@
struct perf_top {
struct perf_tool tool;
struct perf_evlist *evlist;
- struct perf_target target;
+ struct perf_record_opts record_opts;
/*
* Symbols will be added here in perf_event__process_sample and will
* get out after decayed.
@@ -24,24 +24,16 @@
u64 exact_samples;
u64 guest_us_samples, guest_kernel_samples;
int print_entries, count_filter, delay_secs;
- int freq;
bool hide_kernel_symbols, hide_user_symbols, zero;
bool use_tui, use_stdio;
bool sort_has_symbols;
- bool dont_use_callchains;
bool kptr_restrict_warned;
bool vmlinux_warned;
- bool inherit;
- bool group;
- bool sample_id_all_missing;
- bool exclude_guest_missing;
bool dump_symtab;
struct hist_entry *sym_filter_entry;
struct perf_evsel *sym_evsel;
struct perf_session *session;
struct winsize winsize;
- unsigned int mmap_pages;
- int default_interval;
int realtime_prio;
int sym_pcnt_filter;
const char *sym_filter;
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 5906e84..805d1f5 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -12,6 +12,8 @@
*/
unsigned int page_size;
+bool test_attr__enabled;
+
bool perf_host = true;
bool perf_guest = false;
@@ -218,3 +220,25 @@
#else
void dump_stack(void) {}
#endif
+
+void get_term_dimensions(struct winsize *ws)
+{
+ char *s = getenv("LINES");
+
+ if (s != NULL) {
+ ws->ws_row = atoi(s);
+ s = getenv("COLUMNS");
+ if (s != NULL) {
+ ws->ws_col = atoi(s);
+ if (ws->ws_row && ws->ws_col)
+ return;
+ }
+ }
+#ifdef TIOCGWINSZ
+ if (ioctl(1, TIOCGWINSZ, ws) == 0 &&
+ ws->ws_row && ws->ws_col)
+ return;
+#endif
+ ws->ws_row = 25;
+ ws->ws_col = 80;
+}
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index c233091..09b4c26 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -265,10 +265,14 @@
size_t hex_width(u64 v);
int hex2u64(const char *ptr, u64 *val);
+char *ltrim(char *s);
char *rtrim(char *s);
void dump_stack(void);
extern unsigned int page_size;
+struct winsize;
+void get_term_dimensions(struct winsize *ws);
+
#endif
diff --git a/tools/power/acpi/Makefile b/tools/power/acpi/Makefile
index 6b9cf7a..bafeb8d 100644
--- a/tools/power/acpi/Makefile
+++ b/tools/power/acpi/Makefile
@@ -13,6 +13,6 @@
rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS)) *~
install :
- install acpidump /usr/bin/acpidump
+ install acpidump /usr/sbin/acpidump
install acpidump.8 /usr/share/man/man8
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 0d7dc2c..b4ddb74 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -31,8 +31,6 @@
.PP
The \fB-v\fP option increases verbosity.
.PP
-The \fB-s\fP option prints the SMI counter, equivalent to "-c 0x34"
-.PP
The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
@@ -186,26 +184,24 @@
un-halted cycles elapsed per time divided by the number of CPUs.
.SH SMI COUNTING EXAMPLE
On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
-Using the -m option, you can display how many SMIs have fired since reset, or if there
-are SMIs during the measurement interval, you can display the delta using the -d option.
+This counter is shown by default under the "SMI" column.
.nf
-[root@x980 ~]# turbostat -m 0x34
-cor CPU %c0 GHz TSC MSR 0x034 %c1 %c3 %c6 %pc3 %pc6
- 1.41 1.82 3.38 0x00000000 8.92 37.82 51.85 17.37 0.55
- 0 0 3.73 2.03 3.38 0x00000055 1.72 48.25 46.31 17.38 0.55
- 0 6 0.14 1.63 3.38 0x00000056 5.30
- 1 2 2.51 1.80 3.38 0x00000056 15.65 29.33 52.52
- 1 8 0.10 1.65 3.38 0x00000056 18.05
- 2 4 1.16 1.68 3.38 0x00000056 5.87 24.47 68.50
- 2 10 0.10 1.63 3.38 0x00000056 6.93
- 8 1 3.84 1.91 3.38 0x00000056 1.36 50.65 44.16
- 8 7 0.08 1.64 3.38 0x00000056 5.12
- 9 3 1.82 1.73 3.38 0x00000056 7.59 24.21 66.38
- 9 9 0.09 1.68 3.38 0x00000056 9.32
- 10 5 1.66 1.65 3.38 0x00000056 15.10 50.00 33.23
- 10 11 1.72 1.65 3.38 0x00000056 15.05
+[root@x980 ~]# turbostat
+cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 CTMP %pc3 %pc6
+ 0.11 1.91 3.38 0 1.84 0.26 97.79 29 0.82 83.87
+ 0 0 0.40 1.63 3.38 0 10.27 0.12 89.20 20 0.82 83.88
+ 0 6 0.06 1.63 3.38 0 10.61
+ 1 2 0.37 2.63 3.38 0 0.02 0.10 99.51 22
+ 1 8 0.01 1.62 3.38 0 0.39
+ 2 4 0.07 1.62 3.38 0 0.04 0.07 99.82 23
+ 2 10 0.02 1.62 3.38 0 0.09
+ 8 1 0.23 1.64 3.38 0 0.10 1.07 98.60 24
+ 8 7 0.02 1.64 3.38 0 0.31
+ 9 3 0.03 1.62 3.38 0 0.03 0.05 99.89 29
+ 9 9 0.02 1.62 3.38 0 0.05
+ 10 5 0.07 1.62 3.38 0 0.08 0.12 99.73 27
+ 10 11 0.03 1.62 3.38 0 0.13
^C
-[root@x980 ~]#
.fi
.SH NOTES
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index ce6d460..6f3214e 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -58,6 +58,7 @@
unsigned int extra_msr_offset64;
unsigned int extra_delta_offset32;
unsigned int extra_delta_offset64;
+int do_smi;
double bclk;
unsigned int show_pkg;
unsigned int show_core;
@@ -99,6 +100,7 @@
unsigned long long extra_delta64;
unsigned long long extra_msr32;
unsigned long long extra_delta32;
+ unsigned int smi_count;
unsigned int cpu_id;
unsigned int flags;
#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
@@ -248,6 +250,8 @@
if (has_aperf)
outp += sprintf(outp, " GHz");
outp += sprintf(outp, " TSC");
+ if (do_smi)
+ outp += sprintf(outp, " SMI");
if (extra_delta_offset32)
outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
if (extra_delta_offset64)
@@ -314,6 +318,8 @@
extra_msr_offset32, t->extra_msr32);
fprintf(stderr, "msr0x%x: %016llX\n",
extra_msr_offset64, t->extra_msr64);
+ if (do_smi)
+ fprintf(stderr, "SMI: %08X\n", t->smi_count);
}
if (c) {
@@ -352,6 +358,7 @@
* RAM_W: %5.2
* GHz: "GHz" 3 columns %3.2
* TSC: "TSC" 3 columns %3.2
+ * SMI: "SMI" 4 columns %4d
* percentage " %pc3" %6.2
* Perf Status percentage: %5.2
* "CTMP" 4 columns %4d
@@ -431,6 +438,10 @@
/* TSC */
outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
+ /* SMI */
+ if (do_smi)
+ outp += sprintf(outp, "%4d", t->smi_count);
+
/* delta */
if (extra_delta_offset32)
outp += sprintf(outp, " %11llu", t->extra_delta32);
@@ -645,6 +656,9 @@
*/
old->extra_msr32 = new->extra_msr32;
old->extra_msr64 = new->extra_msr64;
+
+ if (do_smi)
+ old->smi_count = new->smi_count - old->smi_count;
}
int delta_cpu(struct thread_data *t, struct core_data *c,
@@ -672,6 +686,7 @@
t->mperf = 0;
t->c1 = 0;
+ t->smi_count = 0;
t->extra_delta32 = 0;
t->extra_delta64 = 0;
@@ -802,6 +817,11 @@
return -4;
}
+ if (do_smi) {
+ if (get_msr(cpu, MSR_SMI_COUNT, &msr))
+ return -5;
+ t->smi_count = msr & 0xFFFFFFFF;
+ }
if (extra_delta_offset32) {
if (get_msr(cpu, extra_delta_offset32, &msr))
return -5;
@@ -908,8 +928,7 @@
get_msr(0, MSR_NHM_PLATFORM_INFO, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr);
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n",
@@ -919,13 +938,16 @@
fprintf(stderr, "%d * %.0f = %.0f MHz TSC frequency\n",
ratio, bclk, ratio * bclk);
+ get_msr(0, MSR_IA32_POWER_CTL, &msr);
+ fprintf(stderr, "cpu0: MSR_IA32_POWER_CTL: 0x%08llx (C1E: %sabled)\n",
+ msr, msr & 0x2 ? "EN" : "DIS");
+
if (!do_ivt_turbo_ratio_limit)
goto print_nhm_turbo_ratio_limits;
get_msr(0, MSR_IVT_TURBO_RATIO_LIMIT, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_IVT_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_IVT_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
@@ -1016,8 +1038,7 @@
get_msr(0, MSR_NHM_TURBO_RATIO_LIMIT, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
@@ -1397,6 +1418,9 @@
case 0x2D: /* SNB Xeon */
case 0x3A: /* IVB */
case 0x3E: /* IVB Xeon */
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
return 1;
case 0x2E: /* Nehalem-EX Xeon - Beckton */
case 0x2F: /* Westmere-EX Xeon - Eagleton */
@@ -1488,6 +1512,9 @@
switch (model) {
case 0x2A:
case 0x3A:
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
do_rapl = RAPL_PKG | RAPL_CORES | RAPL_GFX;
break;
case 0x2D:
@@ -1724,6 +1751,9 @@
case 0x2D:
case 0x3A: /* IVB */
case 0x3E: /* IVB Xeon */
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
return 1;
}
return 0;
@@ -1883,6 +1913,7 @@
do_nehalem_platform_info = genuine_intel && has_invariant_tsc;
do_nhm_cstates = genuine_intel; /* all Intel w/ non-stop TSC have NHM counters */
+ do_smi = do_nhm_cstates;
do_snb_cstates = is_snb(family, model);
bclk = discover_bclk(family, model);
@@ -2219,9 +2250,6 @@
case 'c':
sscanf(optarg, "%x", &extra_delta_offset32);
break;
- case 's':
- extra_delta_offset32 = 0x34; /* SMI counter */
- break;
case 'C':
sscanf(optarg, "%x", &extra_delta_offset64);
break;
@@ -2248,7 +2276,7 @@
cmdline(argc, argv);
if (verbose)
- fprintf(stderr, "turbostat v3.0 November 23, 2012"
+ fprintf(stderr, "turbostat v3.2 February 11, 2013"
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();