Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 0330dba36127768a2e2df2eabb902b5530102871 / . / drivers / scsi / pm8001 / pm8001_hwi.c
blob: 6e1bdd8e680e3b81ad90e4e7dd6b02bdc4de720e [file] [log] [blame]
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1/*
2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40 #include "pm8001_sas.h"
41 #include "pm8001_hwi.h"
42 #include "pm8001_chips.h"
43 #include "pm8001_ctl.h"
44
45/**
46 * read_main_config_table - read the configure table and save it.
47 * @pm8001_ha: our hba card information
48 */
49static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
50{
51 void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
52 pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00);
53 pm8001_ha->main_cfg_tbl.interface_rev = pm8001_mr32(address, 0x04);
54 pm8001_ha->main_cfg_tbl.firmware_rev = pm8001_mr32(address, 0x08);
55 pm8001_ha->main_cfg_tbl.max_out_io = pm8001_mr32(address, 0x0C);
56 pm8001_ha->main_cfg_tbl.max_sgl = pm8001_mr32(address, 0x10);
57 pm8001_ha->main_cfg_tbl.ctrl_cap_flag = pm8001_mr32(address, 0x14);
58 pm8001_ha->main_cfg_tbl.gst_offset = pm8001_mr32(address, 0x18);
59 pm8001_ha->main_cfg_tbl.inbound_queue_offset =
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]60 pm8001_mr32(address, MAIN_IBQ_OFFSET);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]61 pm8001_ha->main_cfg_tbl.outbound_queue_offset =
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]62 pm8001_mr32(address, MAIN_OBQ_OFFSET);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]63 pm8001_ha->main_cfg_tbl.hda_mode_flag =
64 pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
65
66 /* read analog Setting offset from the configuration table */
67 pm8001_ha->main_cfg_tbl.anolog_setup_table_offset =
68 pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
69
70 /* read Error Dump Offset and Length */
71 pm8001_ha->main_cfg_tbl.fatal_err_dump_offset0 =
72 pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
73 pm8001_ha->main_cfg_tbl.fatal_err_dump_length0 =
74 pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
75 pm8001_ha->main_cfg_tbl.fatal_err_dump_offset1 =
76 pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
77 pm8001_ha->main_cfg_tbl.fatal_err_dump_length1 =
78 pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
79}
80
81/**
82 * read_general_status_table - read the general status table and save it.
83 * @pm8001_ha: our hba card information
84 */
85static void __devinit
86read_general_status_table(struct pm8001_hba_info *pm8001_ha)
87{
88 void __iomem *address = pm8001_ha->general_stat_tbl_addr;
89 pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00);
90 pm8001_ha->gs_tbl.iq_freeze_state0 = pm8001_mr32(address, 0x04);
91 pm8001_ha->gs_tbl.iq_freeze_state1 = pm8001_mr32(address, 0x08);
92 pm8001_ha->gs_tbl.msgu_tcnt = pm8001_mr32(address, 0x0C);
93 pm8001_ha->gs_tbl.iop_tcnt = pm8001_mr32(address, 0x10);
94 pm8001_ha->gs_tbl.reserved = pm8001_mr32(address, 0x14);
95 pm8001_ha->gs_tbl.phy_state[0] = pm8001_mr32(address, 0x18);
96 pm8001_ha->gs_tbl.phy_state[1] = pm8001_mr32(address, 0x1C);
97 pm8001_ha->gs_tbl.phy_state[2] = pm8001_mr32(address, 0x20);
98 pm8001_ha->gs_tbl.phy_state[3] = pm8001_mr32(address, 0x24);
99 pm8001_ha->gs_tbl.phy_state[4] = pm8001_mr32(address, 0x28);
100 pm8001_ha->gs_tbl.phy_state[5] = pm8001_mr32(address, 0x2C);
101 pm8001_ha->gs_tbl.phy_state[6] = pm8001_mr32(address, 0x30);
102 pm8001_ha->gs_tbl.phy_state[7] = pm8001_mr32(address, 0x34);
103 pm8001_ha->gs_tbl.reserved1 = pm8001_mr32(address, 0x38);
104 pm8001_ha->gs_tbl.reserved2 = pm8001_mr32(address, 0x3C);
105 pm8001_ha->gs_tbl.reserved3 = pm8001_mr32(address, 0x40);
106 pm8001_ha->gs_tbl.recover_err_info[0] = pm8001_mr32(address, 0x44);
107 pm8001_ha->gs_tbl.recover_err_info[1] = pm8001_mr32(address, 0x48);
108 pm8001_ha->gs_tbl.recover_err_info[2] = pm8001_mr32(address, 0x4C);
109 pm8001_ha->gs_tbl.recover_err_info[3] = pm8001_mr32(address, 0x50);
110 pm8001_ha->gs_tbl.recover_err_info[4] = pm8001_mr32(address, 0x54);
111 pm8001_ha->gs_tbl.recover_err_info[5] = pm8001_mr32(address, 0x58);
112 pm8001_ha->gs_tbl.recover_err_info[6] = pm8001_mr32(address, 0x5C);
113 pm8001_ha->gs_tbl.recover_err_info[7] = pm8001_mr32(address, 0x60);
114}
115
116/**
117 * read_inbnd_queue_table - read the inbound queue table and save it.
118 * @pm8001_ha: our hba card information
119 */
120static void __devinit
121read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
122{
123 int inbQ_num = 1;
124 int i;
125 void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
126 for (i = 0; i < inbQ_num; i++) {
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]127 u32 offset = i * 0x20;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]128 pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
129 get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
130 pm8001_ha->inbnd_q_tbl[i].pi_offset =
131 pm8001_mr32(address, (offset + 0x18));
132 }
133}
134
135/**
136 * read_outbnd_queue_table - read the outbound queue table and save it.
137 * @pm8001_ha: our hba card information
138 */
139static void __devinit
140read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
141{
142 int outbQ_num = 1;
143 int i;
144 void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
145 for (i = 0; i < outbQ_num; i++) {
146 u32 offset = i * 0x24;
147 pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
148 get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
149 pm8001_ha->outbnd_q_tbl[i].ci_offset =
150 pm8001_mr32(address, (offset + 0x18));
151 }
152}
153
154/**
155 * init_default_table_values - init the default table.
156 * @pm8001_ha: our hba card information
157 */
158static void __devinit
159init_default_table_values(struct pm8001_hba_info *pm8001_ha)
160{
161 int qn = 1;
162 int i;
163 u32 offsetib, offsetob;
164 void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
165 void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
166
167 pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd = 0;
168 pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3 = 0;
169 pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7 = 0;
170 pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3 = 0;
171 pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7 = 0;
172 pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3 = 0;
173 pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7 = 0;
174 pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
175 pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
176 pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3 = 0;
177 pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7 = 0;
178
179 pm8001_ha->main_cfg_tbl.upper_event_log_addr =
180 pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
181 pm8001_ha->main_cfg_tbl.lower_event_log_addr =
182 pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
183 pm8001_ha->main_cfg_tbl.event_log_size = PM8001_EVENT_LOG_SIZE;
184 pm8001_ha->main_cfg_tbl.event_log_option = 0x01;
185 pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr =
186 pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
187 pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr =
188 pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
189 pm8001_ha->main_cfg_tbl.iop_event_log_size = PM8001_EVENT_LOG_SIZE;
190 pm8001_ha->main_cfg_tbl.iop_event_log_option = 0x01;
191 pm8001_ha->main_cfg_tbl.fatal_err_interrupt = 0x01;
192 for (i = 0; i < qn; i++) {
193 pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
194 0x00000100 | (0x00000040 << 16) | (0x00<<30);
195 pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
196 pm8001_ha->memoryMap.region[IB].phys_addr_hi;
197 pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
198 pm8001_ha->memoryMap.region[IB].phys_addr_lo;
199 pm8001_ha->inbnd_q_tbl[i].base_virt =
200 (u8 *)pm8001_ha->memoryMap.region[IB].virt_ptr;
201 pm8001_ha->inbnd_q_tbl[i].total_length =
202 pm8001_ha->memoryMap.region[IB].total_len;
203 pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
204 pm8001_ha->memoryMap.region[CI].phys_addr_hi;
205 pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
206 pm8001_ha->memoryMap.region[CI].phys_addr_lo;
207 pm8001_ha->inbnd_q_tbl[i].ci_virt =
208 pm8001_ha->memoryMap.region[CI].virt_ptr;
209 offsetib = i * 0x20;
210 pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
211 get_pci_bar_index(pm8001_mr32(addressib,
212 (offsetib + 0x14)));
213 pm8001_ha->inbnd_q_tbl[i].pi_offset =
214 pm8001_mr32(addressib, (offsetib + 0x18));
215 pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
216 pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
217 }
218 for (i = 0; i < qn; i++) {
219 pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
220 256 | (64 << 16) | (1<<30);
221 pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
222 pm8001_ha->memoryMap.region[OB].phys_addr_hi;
223 pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
224 pm8001_ha->memoryMap.region[OB].phys_addr_lo;
225 pm8001_ha->outbnd_q_tbl[i].base_virt =
226 (u8 *)pm8001_ha->memoryMap.region[OB].virt_ptr;
227 pm8001_ha->outbnd_q_tbl[i].total_length =
228 pm8001_ha->memoryMap.region[OB].total_len;
229 pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
230 pm8001_ha->memoryMap.region[PI].phys_addr_hi;
231 pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
232 pm8001_ha->memoryMap.region[PI].phys_addr_lo;
233 pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay =
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]234 0 | (10 << 16) | (0 << 24);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]235 pm8001_ha->outbnd_q_tbl[i].pi_virt =
236 pm8001_ha->memoryMap.region[PI].virt_ptr;
237 offsetob = i * 0x24;
238 pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
239 get_pci_bar_index(pm8001_mr32(addressob,
240 offsetob + 0x14));
241 pm8001_ha->outbnd_q_tbl[i].ci_offset =
242 pm8001_mr32(addressob, (offsetob + 0x18));
243 pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
244 pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
245 }
246}
247
248/**
249 * update_main_config_table - update the main default table to the HBA.
250 * @pm8001_ha: our hba card information
251 */
252static void __devinit
253update_main_config_table(struct pm8001_hba_info *pm8001_ha)
254{
255 void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
256 pm8001_mw32(address, 0x24,
257 pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd);
258 pm8001_mw32(address, 0x28,
259 pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3);
260 pm8001_mw32(address, 0x2C,
261 pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7);
262 pm8001_mw32(address, 0x30,
263 pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3);
264 pm8001_mw32(address, 0x34,
265 pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7);
266 pm8001_mw32(address, 0x38,
267 pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3);
268 pm8001_mw32(address, 0x3C,
269 pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7);
270 pm8001_mw32(address, 0x40,
271 pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3);
272 pm8001_mw32(address, 0x44,
273 pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7);
274 pm8001_mw32(address, 0x48,
275 pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3);
276 pm8001_mw32(address, 0x4C,
277 pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7);
278 pm8001_mw32(address, 0x50,
279 pm8001_ha->main_cfg_tbl.upper_event_log_addr);
280 pm8001_mw32(address, 0x54,
281 pm8001_ha->main_cfg_tbl.lower_event_log_addr);
282 pm8001_mw32(address, 0x58, pm8001_ha->main_cfg_tbl.event_log_size);
283 pm8001_mw32(address, 0x5C, pm8001_ha->main_cfg_tbl.event_log_option);
284 pm8001_mw32(address, 0x60,
285 pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr);
286 pm8001_mw32(address, 0x64,
287 pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr);
288 pm8001_mw32(address, 0x68, pm8001_ha->main_cfg_tbl.iop_event_log_size);
289 pm8001_mw32(address, 0x6C,
290 pm8001_ha->main_cfg_tbl.iop_event_log_option);
291 pm8001_mw32(address, 0x70,
292 pm8001_ha->main_cfg_tbl.fatal_err_interrupt);
293}
294
295/**
296 * update_inbnd_queue_table - update the inbound queue table to the HBA.
297 * @pm8001_ha: our hba card information
298 */
299static void __devinit
300update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
301{
302 void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
303 u16 offset = number * 0x20;
304 pm8001_mw32(address, offset + 0x00,
305 pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
306 pm8001_mw32(address, offset + 0x04,
307 pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
308 pm8001_mw32(address, offset + 0x08,
309 pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
310 pm8001_mw32(address, offset + 0x0C,
311 pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
312 pm8001_mw32(address, offset + 0x10,
313 pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
314}
315
316/**
317 * update_outbnd_queue_table - update the outbound queue table to the HBA.
318 * @pm8001_ha: our hba card information
319 */
320static void __devinit
321update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
322{
323 void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
324 u16 offset = number * 0x24;
325 pm8001_mw32(address, offset + 0x00,
326 pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
327 pm8001_mw32(address, offset + 0x04,
328 pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
329 pm8001_mw32(address, offset + 0x08,
330 pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
331 pm8001_mw32(address, offset + 0x0C,
332 pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
333 pm8001_mw32(address, offset + 0x10,
334 pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
335 pm8001_mw32(address, offset + 0x1C,
336 pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
337}
338
339/**
340 * bar4_shift - function is called to shift BAR base address
341 * @pm8001_ha : our hba card infomation
342 * @shiftValue : shifting value in memory bar.
343 */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]344static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]345{
346 u32 regVal;
347 u32 max_wait_count;
348
349 /* program the inbound AXI translation Lower Address */
350 pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
351
352 /* confirm the setting is written */
353 max_wait_count = 1 * 1000 * 1000; /* 1 sec */
354 do {
355 udelay(1);
356 regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
357 } while ((regVal != shiftValue) && (--max_wait_count));
358
359 if (!max_wait_count) {
360 PM8001_INIT_DBG(pm8001_ha,
361 pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
362 " = 0x%x\n", regVal));
363 return -1;
364 }
365 return 0;
366}
367
368/**
369 * mpi_set_phys_g3_with_ssc
370 * @pm8001_ha: our hba card information
371 * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
372 */
373static void __devinit
374mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
375{
jack wang0330dba2009-12-07 17:46:22 +0800[diff] [blame^]376 u32 value, offset, i;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]377
378#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
379#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
380#define SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET 0x1074
381#define SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET 0x1074
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]382#define PHY_G3_WITHOUT_SSC_BIT_SHIFT 12
383#define PHY_G3_WITH_SSC_BIT_SHIFT 13
384#define SNW3_PHY_CAPABILITIES_PARITY 31
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]385
386 /*
387 * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
388 * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
389 */
390 if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
391 return;
jack wang0330dba2009-12-07 17:46:22 +0800[diff] [blame^]392
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]393 for (i = 0; i < 4; i++) {
394 offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
jack wang0330dba2009-12-07 17:46:22 +0800[diff] [blame^]395 pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]396 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]397 /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
398 if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
399 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]400 for (i = 4; i < 8; i++) {
401 offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
jack wang0330dba2009-12-07 17:46:22 +0800[diff] [blame^]402 pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]403 }
jack wang0330dba2009-12-07 17:46:22 +0800[diff] [blame^]404 /*************************************************************
405 Change the SSC upspreading value to 0x0 so that upspreading is disabled.
406 Device MABC SMOD0 Controls
407 Address: (via MEMBASE-III):
408 Using shifted destination address 0x0_0000: with Offset 0xD8
409
410 31:28 R/W Reserved Do not change
411 27:24 R/W SAS_SMOD_SPRDUP 0000
412 23:20 R/W SAS_SMOD_SPRDDN 0000
413 19:0 R/W Reserved Do not change
414 Upon power-up this register will read as 0x8990c016,
415 and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000
416 so that the written value will be 0x8090c016.
417 This will ensure only down-spreading SSC is enabled on the SPC.
418 *************************************************************/
419 value = pm8001_cr32(pm8001_ha, 2, 0xd8);
420 pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]421
422 /*set the shifted destination address to 0x0 to avoid error operation */
423 bar4_shift(pm8001_ha, 0x0);
424 return;
425}
426
427/**
428 * mpi_set_open_retry_interval_reg
429 * @pm8001_ha: our hba card information
430 * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
431 */
432static void __devinit
433mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
434 u32 interval)
435{
436 u32 offset;
437 u32 value;
438 u32 i;
439
440#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
441#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
442#define OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET 0x30B4
443#define OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET 0x30B4
444#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
445
446 value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
447 /* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
448 if (-1 == bar4_shift(pm8001_ha,
449 OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR))
450 return;
451 for (i = 0; i < 4; i++) {
452 offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
453 pm8001_cw32(pm8001_ha, 2, offset, value);
454 }
455
456 if (-1 == bar4_shift(pm8001_ha,
457 OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR))
458 return;
459 for (i = 4; i < 8; i++) {
460 offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
461 pm8001_cw32(pm8001_ha, 2, offset, value);
462 }
463 /*set the shifted destination address to 0x0 to avoid error operation */
464 bar4_shift(pm8001_ha, 0x0);
465 return;
466}
467
468/**
469 * mpi_init_check - check firmware initialization status.
470 * @pm8001_ha: our hba card information
471 */
472static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
473{
474 u32 max_wait_count;
475 u32 value;
476 u32 gst_len_mpistate;
477 /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
478 table is updated */
479 pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_UPDATE);
480 /* wait until Inbound DoorBell Clear Register toggled */
481 max_wait_count = 1 * 1000 * 1000;/* 1 sec */
482 do {
483 udelay(1);
484 value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
485 value &= SPC_MSGU_CFG_TABLE_UPDATE;
486 } while ((value != 0) && (--max_wait_count));
487
488 if (!max_wait_count)
489 return -1;
490 /* check the MPI-State for initialization */
491 gst_len_mpistate =
492 pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
493 GST_GSTLEN_MPIS_OFFSET);
494 if (GST_MPI_STATE_INIT != (gst_len_mpistate & GST_MPI_STATE_MASK))
495 return -1;
496 /* check MPI Initialization error */
497 gst_len_mpistate = gst_len_mpistate >> 16;
498 if (0x0000 != gst_len_mpistate)
499 return -1;
500 return 0;
501}
502
503/**
504 * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
505 * @pm8001_ha: our hba card information
506 */
507static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
508{
509 u32 value, value1;
510 u32 max_wait_count;
511 /* check error state */
512 value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
513 value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
514 /* check AAP error */
515 if (SCRATCH_PAD1_ERR == (value & SCRATCH_PAD_STATE_MASK)) {
516 /* error state */
517 value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
518 return -1;
519 }
520
521 /* check IOP error */
522 if (SCRATCH_PAD2_ERR == (value1 & SCRATCH_PAD_STATE_MASK)) {
523 /* error state */
524 value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
525 return -1;
526 }
527
528 /* bit 4-31 of scratch pad1 should be zeros if it is not
529 in error state*/
530 if (value & SCRATCH_PAD1_STATE_MASK) {
531 /* error case */
532 pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
533 return -1;
534 }
535
536 /* bit 2, 4-31 of scratch pad2 should be zeros if it is not
537 in error state */
538 if (value1 & SCRATCH_PAD2_STATE_MASK) {
539 /* error case */
540 return -1;
541 }
542
543 max_wait_count = 1 * 1000 * 1000;/* 1 sec timeout */
544
545 /* wait until scratch pad 1 and 2 registers in ready state */
546 do {
547 udelay(1);
548 value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
549 & SCRATCH_PAD1_RDY;
550 value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
551 & SCRATCH_PAD2_RDY;
552 if ((--max_wait_count) == 0)
553 return -1;
554 } while ((value != SCRATCH_PAD1_RDY) || (value1 != SCRATCH_PAD2_RDY));
555 return 0;
556}
557
558static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
559{
560 void __iomem *base_addr;
561 u32 value;
562 u32 offset;
563 u32 pcibar;
564 u32 pcilogic;
565
566 value = pm8001_cr32(pm8001_ha, 0, 0x44);
567 offset = value & 0x03FFFFFF;
568 PM8001_INIT_DBG(pm8001_ha,
569 pm8001_printk("Scratchpad 0 Offset: %x \n", offset));
570 pcilogic = (value & 0xFC000000) >> 26;
571 pcibar = get_pci_bar_index(pcilogic);
572 PM8001_INIT_DBG(pm8001_ha,
573 pm8001_printk("Scratchpad 0 PCI BAR: %d \n", pcibar));
574 pm8001_ha->main_cfg_tbl_addr = base_addr =
575 pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
576 pm8001_ha->general_stat_tbl_addr =
577 base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18);
578 pm8001_ha->inbnd_q_tbl_addr =
579 base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C);
580 pm8001_ha->outbnd_q_tbl_addr =
581 base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20);
582}
583
584/**
585 * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
586 * @pm8001_ha: our hba card information
587 */
588static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
589{
590 /* check the firmware status */
591 if (-1 == check_fw_ready(pm8001_ha)) {
592 PM8001_FAIL_DBG(pm8001_ha,
593 pm8001_printk("Firmware is not ready!\n"));
594 return -EBUSY;
595 }
596
597 /* Initialize pci space address eg: mpi offset */
598 init_pci_device_addresses(pm8001_ha);
599 init_default_table_values(pm8001_ha);
600 read_main_config_table(pm8001_ha);
601 read_general_status_table(pm8001_ha);
602 read_inbnd_queue_table(pm8001_ha);
603 read_outbnd_queue_table(pm8001_ha);
604 /* update main config table ,inbound table and outbound table */
605 update_main_config_table(pm8001_ha);
606 update_inbnd_queue_table(pm8001_ha, 0);
607 update_outbnd_queue_table(pm8001_ha, 0);
608 mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
609 mpi_set_open_retry_interval_reg(pm8001_ha, 7);
610 /* notify firmware update finished and check initialization status */
611 if (0 == mpi_init_check(pm8001_ha)) {
612 PM8001_INIT_DBG(pm8001_ha,
613 pm8001_printk("MPI initialize successful!\n"));
614 } else
615 return -EBUSY;
616 /*This register is a 16-bit timer with a resolution of 1us. This is the
617 timer used for interrupt delay/coalescing in the PCIe Application Layer.
618 Zero is not a valid value. A value of 1 in the register will cause the
619 interrupts to be normal. A value greater than 1 will cause coalescing
620 delays.*/
621 pm8001_cw32(pm8001_ha, 1, 0x0033c0, 0x1);
622 pm8001_cw32(pm8001_ha, 1, 0x0033c4, 0x0);
623 return 0;
624}
625
626static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
627{
628 u32 max_wait_count;
629 u32 value;
630 u32 gst_len_mpistate;
631 init_pci_device_addresses(pm8001_ha);
632 /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
633 table is stop */
634 pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_RESET);
635
636 /* wait until Inbound DoorBell Clear Register toggled */
637 max_wait_count = 1 * 1000 * 1000;/* 1 sec */
638 do {
639 udelay(1);
640 value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
641 value &= SPC_MSGU_CFG_TABLE_RESET;
642 } while ((value != 0) && (--max_wait_count));
643
644 if (!max_wait_count) {
645 PM8001_FAIL_DBG(pm8001_ha,
646 pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
647 return -1;
648 }
649
650 /* check the MPI-State for termination in progress */
651 /* wait until Inbound DoorBell Clear Register toggled */
652 max_wait_count = 1 * 1000 * 1000; /* 1 sec */
653 do {
654 udelay(1);
655 gst_len_mpistate =
656 pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
657 GST_GSTLEN_MPIS_OFFSET);
658 if (GST_MPI_STATE_UNINIT ==
659 (gst_len_mpistate & GST_MPI_STATE_MASK))
660 break;
661 } while (--max_wait_count);
662 if (!max_wait_count) {
663 PM8001_FAIL_DBG(pm8001_ha,
664 pm8001_printk(" TIME OUT MPI State = 0x%x\n",
665 gst_len_mpistate & GST_MPI_STATE_MASK));
666 return -1;
667 }
668 return 0;
669}
670
671/**
672 * soft_reset_ready_check - Function to check FW is ready for soft reset.
673 * @pm8001_ha: our hba card information
674 */
675static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
676{
677 u32 regVal, regVal1, regVal2;
678 if (mpi_uninit_check(pm8001_ha) != 0) {
679 PM8001_FAIL_DBG(pm8001_ha,
680 pm8001_printk("MPI state is not ready\n"));
681 return -1;
682 }
683 /* read the scratch pad 2 register bit 2 */
684 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
685 & SCRATCH_PAD2_FWRDY_RST;
686 if (regVal == SCRATCH_PAD2_FWRDY_RST) {
687 PM8001_INIT_DBG(pm8001_ha,
688 pm8001_printk("Firmware is ready for reset .\n"));
689 } else {
690 /* Trigger NMI twice via RB6 */
691 if (-1 == bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
692 PM8001_FAIL_DBG(pm8001_ha,
693 pm8001_printk("Shift Bar4 to 0x%x failed\n",
694 RB6_ACCESS_REG));
695 return -1;
696 }
697 pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
698 RB6_MAGIC_NUMBER_RST);
699 pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, RB6_MAGIC_NUMBER_RST);
700 /* wait for 100 ms */
701 mdelay(100);
702 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) &
703 SCRATCH_PAD2_FWRDY_RST;
704 if (regVal != SCRATCH_PAD2_FWRDY_RST) {
705 regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
706 regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
707 PM8001_FAIL_DBG(pm8001_ha,
708 pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
709 "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
710 regVal1, regVal2));
711 PM8001_FAIL_DBG(pm8001_ha,
712 pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
713 pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
714 PM8001_FAIL_DBG(pm8001_ha,
715 pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
716 pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
717 return -1;
718 }
719 }
720 return 0;
721}
722
723/**
724 * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
725 * the FW register status to the originated status.
726 * @pm8001_ha: our hba card information
727 * @signature: signature in host scratch pad0 register.
728 */
729static int
730pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
731{
732 u32 regVal, toggleVal;
733 u32 max_wait_count;
734 u32 regVal1, regVal2, regVal3;
735
736 /* step1: Check FW is ready for soft reset */
737 if (soft_reset_ready_check(pm8001_ha) != 0) {
738 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
739 return -1;
740 }
741
742 /* step 2: clear NMI status register on AAP1 and IOP, write the same
743 value to clear */
744 /* map 0x60000 to BAR4(0x20), BAR2(win) */
745 if (-1 == bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
746 PM8001_FAIL_DBG(pm8001_ha,
747 pm8001_printk("Shift Bar4 to 0x%x failed\n",
748 MBIC_AAP1_ADDR_BASE));
749 return -1;
750 }
751 regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
752 PM8001_INIT_DBG(pm8001_ha,
753 pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
754 pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
755 /* map 0x70000 to BAR4(0x20), BAR2(win) */
756 if (-1 == bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
757 PM8001_FAIL_DBG(pm8001_ha,
758 pm8001_printk("Shift Bar4 to 0x%x failed\n",
759 MBIC_IOP_ADDR_BASE));
760 return -1;
761 }
762 regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
763 PM8001_INIT_DBG(pm8001_ha,
764 pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
765 pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
766
767 regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
768 PM8001_INIT_DBG(pm8001_ha,
769 pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
770 pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
771
772 regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
773 PM8001_INIT_DBG(pm8001_ha,
774 pm8001_printk("PCIE - Event Interrupt = 0x%x\n", regVal));
775 pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
776
777 regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
778 PM8001_INIT_DBG(pm8001_ha,
779 pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
780 pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
781
782 regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
783 PM8001_INIT_DBG(pm8001_ha,
784 pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
785 pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
786
787 /* read the scratch pad 1 register bit 2 */
788 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
789 & SCRATCH_PAD1_RST;
790 toggleVal = regVal ^ SCRATCH_PAD1_RST;
791
792 /* set signature in host scratch pad0 register to tell SPC that the
793 host performs the soft reset */
794 pm8001_cw32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0, signature);
795
796 /* read required registers for confirmming */
797 /* map 0x0700000 to BAR4(0x20), BAR2(win) */
798 if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
799 PM8001_FAIL_DBG(pm8001_ha,
800 pm8001_printk("Shift Bar4 to 0x%x failed\n",
801 GSM_ADDR_BASE));
802 return -1;
803 }
804 PM8001_INIT_DBG(pm8001_ha,
805 pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
806 " Reset = 0x%x\n",
807 pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
808
809 /* step 3: host read GSM Configuration and Reset register */
810 regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
811 /* Put those bits to low */
812 /* GSM XCBI offset = 0x70 0000
813 0x00 Bit 13 COM_SLV_SW_RSTB 1
814 0x00 Bit 12 QSSP_SW_RSTB 1
815 0x00 Bit 11 RAAE_SW_RSTB 1
816 0x00 Bit 9 RB_1_SW_RSTB 1
817 0x00 Bit 8 SM_SW_RSTB 1
818 */
819 regVal &= ~(0x00003b00);
820 /* host write GSM Configuration and Reset register */
821 pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
822 PM8001_INIT_DBG(pm8001_ha,
823 pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
824 "Configuration and Reset is set to = 0x%x\n",
825 pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
826
827 /* step 4: */
828 /* disable GSM - Read Address Parity Check */
829 regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
830 PM8001_INIT_DBG(pm8001_ha,
831 pm8001_printk("GSM 0x700038 - Read Address Parity Check "
832 "Enable = 0x%x\n", regVal1));
833 pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
834 PM8001_INIT_DBG(pm8001_ha,
835 pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
836 "is set to = 0x%x\n",
837 pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
838
839 /* disable GSM - Write Address Parity Check */
840 regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
841 PM8001_INIT_DBG(pm8001_ha,
842 pm8001_printk("GSM 0x700040 - Write Address Parity Check"
843 " Enable = 0x%x\n", regVal2));
844 pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
845 PM8001_INIT_DBG(pm8001_ha,
846 pm8001_printk("GSM 0x700040 - Write Address Parity Check "
847 "Enable is set to = 0x%x\n",
848 pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
849
850 /* disable GSM - Write Data Parity Check */
851 regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
852 PM8001_INIT_DBG(pm8001_ha,
853 pm8001_printk("GSM 0x300048 - Write Data Parity Check"
854 " Enable = 0x%x\n", regVal3));
855 pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
856 PM8001_INIT_DBG(pm8001_ha,
857 pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
858 "is set to = 0x%x\n",
859 pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
860
861 /* step 5: delay 10 usec */
862 udelay(10);
863 /* step 5-b: set GPIO-0 output control to tristate anyway */
864 if (-1 == bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
865 PM8001_INIT_DBG(pm8001_ha,
866 pm8001_printk("Shift Bar4 to 0x%x failed\n",
867 GPIO_ADDR_BASE));
868 return -1;
869 }
870 regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
871 PM8001_INIT_DBG(pm8001_ha,
872 pm8001_printk("GPIO Output Control Register:"
873 " = 0x%x\n", regVal));
874 /* set GPIO-0 output control to tri-state */
875 regVal &= 0xFFFFFFFC;
876 pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
877
878 /* Step 6: Reset the IOP and AAP1 */
879 /* map 0x00000 to BAR4(0x20), BAR2(win) */
880 if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
881 PM8001_FAIL_DBG(pm8001_ha,
882 pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
883 SPC_TOP_LEVEL_ADDR_BASE));
884 return -1;
885 }
886 regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
887 PM8001_INIT_DBG(pm8001_ha,
888 pm8001_printk("Top Register before resetting IOP/AAP1"
889 ":= 0x%x\n", regVal));
890 regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
891 pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
892
893 /* step 7: Reset the BDMA/OSSP */
894 regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
895 PM8001_INIT_DBG(pm8001_ha,
896 pm8001_printk("Top Register before resetting BDMA/OSSP"
897 ": = 0x%x\n", regVal));
898 regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
899 pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
900
901 /* step 8: delay 10 usec */
902 udelay(10);
903
904 /* step 9: bring the BDMA and OSSP out of reset */
905 regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
906 PM8001_INIT_DBG(pm8001_ha,
907 pm8001_printk("Top Register before bringing up BDMA/OSSP"
908 ":= 0x%x\n", regVal));
909 regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
910 pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
911
912 /* step 10: delay 10 usec */
913 udelay(10);
914
915 /* step 11: reads and sets the GSM Configuration and Reset Register */
916 /* map 0x0700000 to BAR4(0x20), BAR2(win) */
917 if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
918 PM8001_FAIL_DBG(pm8001_ha,
919 pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
920 GSM_ADDR_BASE));
921 return -1;
922 }
923 PM8001_INIT_DBG(pm8001_ha,
924 pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
925 "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
926 regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
927 /* Put those bits to high */
928 /* GSM XCBI offset = 0x70 0000
929 0x00 Bit 13 COM_SLV_SW_RSTB 1
930 0x00 Bit 12 QSSP_SW_RSTB 1
931 0x00 Bit 11 RAAE_SW_RSTB 1
932 0x00 Bit 9 RB_1_SW_RSTB 1
933 0x00 Bit 8 SM_SW_RSTB 1
934 */
935 regVal |= (GSM_CONFIG_RESET_VALUE);
936 pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
937 PM8001_INIT_DBG(pm8001_ha,
938 pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
939 " Configuration and Reset is set to = 0x%x\n",
940 pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
941
942 /* step 12: Restore GSM - Read Address Parity Check */
943 regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
944 /* just for debugging */
945 PM8001_INIT_DBG(pm8001_ha,
946 pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
947 " = 0x%x\n", regVal));
948 pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
949 PM8001_INIT_DBG(pm8001_ha,
950 pm8001_printk("GSM 0x700038 - Read Address Parity"
951 " Check Enable is set to = 0x%x\n",
952 pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
953 /* Restore GSM - Write Address Parity Check */
954 regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
955 pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
956 PM8001_INIT_DBG(pm8001_ha,
957 pm8001_printk("GSM 0x700040 - Write Address Parity Check"
958 " Enable is set to = 0x%x\n",
959 pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
960 /* Restore GSM - Write Data Parity Check */
961 regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
962 pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
963 PM8001_INIT_DBG(pm8001_ha,
964 pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
965 "is set to = 0x%x\n",
966 pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
967
968 /* step 13: bring the IOP and AAP1 out of reset */
969 /* map 0x00000 to BAR4(0x20), BAR2(win) */
970 if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
971 PM8001_FAIL_DBG(pm8001_ha,
972 pm8001_printk("Shift Bar4 to 0x%x failed\n",
973 SPC_TOP_LEVEL_ADDR_BASE));
974 return -1;
975 }
976 regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
977 regVal |= (SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
978 pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
979
980 /* step 14: delay 10 usec - Normal Mode */
981 udelay(10);
982 /* check Soft Reset Normal mode or Soft Reset HDA mode */
983 if (signature == SPC_SOFT_RESET_SIGNATURE) {
984 /* step 15 (Normal Mode): wait until scratch pad1 register
985 bit 2 toggled */
986 max_wait_count = 2 * 1000 * 1000;/* 2 sec */
987 do {
988 udelay(1);
989 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
990 SCRATCH_PAD1_RST;
991 } while ((regVal != toggleVal) && (--max_wait_count));
992
993 if (!max_wait_count) {
994 regVal = pm8001_cr32(pm8001_ha, 0,
995 MSGU_SCRATCH_PAD_1);
996 PM8001_FAIL_DBG(pm8001_ha,
997 pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
998 "MSGU_SCRATCH_PAD1 = 0x%x\n",
999 toggleVal, regVal));
1000 PM8001_FAIL_DBG(pm8001_ha,
1001 pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
1002 pm8001_cr32(pm8001_ha, 0,
1003 MSGU_SCRATCH_PAD_0)));
1004 PM8001_FAIL_DBG(pm8001_ha,
1005 pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
1006 pm8001_cr32(pm8001_ha, 0,
1007 MSGU_SCRATCH_PAD_2)));
1008 PM8001_FAIL_DBG(pm8001_ha,
1009 pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
1010 pm8001_cr32(pm8001_ha, 0,
1011 MSGU_SCRATCH_PAD_3)));
1012 return -1;
1013 }
1014
1015 /* step 16 (Normal) - Clear ODMR and ODCR */
1016 pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
1017 pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
1018
1019 /* step 17 (Normal Mode): wait for the FW and IOP to get
1020 ready - 1 sec timeout */
1021 /* Wait for the SPC Configuration Table to be ready */
1022 if (check_fw_ready(pm8001_ha) == -1) {
1023 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
1024 /* return error if MPI Configuration Table not ready */
1025 PM8001_INIT_DBG(pm8001_ha,
1026 pm8001_printk("FW not ready SCRATCH_PAD1"
1027 " = 0x%x\n", regVal));
1028 regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
1029 /* return error if MPI Configuration Table not ready */
1030 PM8001_INIT_DBG(pm8001_ha,
1031 pm8001_printk("FW not ready SCRATCH_PAD2"
1032 " = 0x%x\n", regVal));
1033 PM8001_INIT_DBG(pm8001_ha,
1034 pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
1035 pm8001_cr32(pm8001_ha, 0,
1036 MSGU_SCRATCH_PAD_0)));
1037 PM8001_INIT_DBG(pm8001_ha,
1038 pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
1039 pm8001_cr32(pm8001_ha, 0,
1040 MSGU_SCRATCH_PAD_3)));
1041 return -1;
1042 }
1043 }
1044
1045 PM8001_INIT_DBG(pm8001_ha,
1046 pm8001_printk("SPC soft reset Complete\n"));
1047 return 0;
1048}
1049
1050static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
1051{
1052 u32 i;
1053 u32 regVal;
1054 PM8001_INIT_DBG(pm8001_ha,
1055 pm8001_printk("chip reset start\n"));
1056
1057 /* do SPC chip reset. */
1058 regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
1059 regVal &= ~(SPC_REG_RESET_DEVICE);
1060 pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
1061
1062 /* delay 10 usec */
1063 udelay(10);
1064
1065 /* bring chip reset out of reset */
1066 regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
1067 regVal |= SPC_REG_RESET_DEVICE;
1068 pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
1069
1070 /* delay 10 usec */
1071 udelay(10);
1072
1073 /* wait for 20 msec until the firmware gets reloaded */
1074 i = 20;
1075 do {
1076 mdelay(1);
1077 } while ((--i) != 0);
1078
1079 PM8001_INIT_DBG(pm8001_ha,
1080 pm8001_printk("chip reset finished\n"));
1081}
1082
1083/**
1084 * pm8001_chip_iounmap - which maped when initilized.
1085 * @pm8001_ha: our hba card information
1086 */
1087static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
1088{
1089 s8 bar, logical = 0;
1090 for (bar = 0; bar < 6; bar++) {
1091 /*
1092 ** logical BARs for SPC:
1093 ** bar 0 and 1 - logical BAR0
1094 ** bar 2 and 3 - logical BAR1
1095 ** bar4 - logical BAR2
1096 ** bar5 - logical BAR3
1097 ** Skip the appropriate assignments:
1098 */
1099 if ((bar == 1) || (bar == 3))
1100 continue;
1101 if (pm8001_ha->io_mem[logical].memvirtaddr) {
1102 iounmap(pm8001_ha->io_mem[logical].memvirtaddr);
1103 logical++;
1104 }
1105 }
1106}
1107
1108/**
1109 * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
1110 * @pm8001_ha: our hba card information
1111 */
1112static void
1113pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
1114{
1115 pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
1116 pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
1117}
1118
1119 /**
1120 * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
1121 * @pm8001_ha: our hba card information
1122 */
1123static void
1124pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
1125{
1126 pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
1127}
1128
1129/**
1130 * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
1131 * @pm8001_ha: our hba card information
1132 */
1133static void
1134pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
1135 u32 int_vec_idx)
1136{
1137 u32 msi_index;
1138 u32 value;
1139 msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
1140 msi_index += MSIX_TABLE_BASE;
1141 pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
1142 value = (1 << int_vec_idx);
1143 pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, value);
1144
1145}
1146
1147/**
1148 * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
1149 * @pm8001_ha: our hba card information
1150 */
1151static void
1152pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
1153 u32 int_vec_idx)
1154{
1155 u32 msi_index;
1156 msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
1157 msi_index += MSIX_TABLE_BASE;
1158 pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE);
1159
1160}
1161/**
1162 * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
1163 * @pm8001_ha: our hba card information
1164 */
1165static void
1166pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
1167{
1168#ifdef PM8001_USE_MSIX
1169 pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
1170 return;
1171#endif
1172 pm8001_chip_intx_interrupt_enable(pm8001_ha);
1173
1174}
1175
1176/**
1177 * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
1178 * @pm8001_ha: our hba card information
1179 */
1180static void
1181pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
1182{
1183#ifdef PM8001_USE_MSIX
1184 pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
1185 return;
1186#endif
1187 pm8001_chip_intx_interrupt_disable(pm8001_ha);
1188
1189}
1190
1191/**
1192 * mpi_msg_free_get- get the free message buffer for transfer inbound queue.
1193 * @circularQ: the inbound queue we want to transfer to HBA.
1194 * @messageSize: the message size of this transfer, normally it is 64 bytes
1195 * @messagePtr: the pointer to message.
1196 */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1197static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1198 u16 messageSize, void **messagePtr)
1199{
1200 u32 offset, consumer_index;
1201 struct mpi_msg_hdr *msgHeader;
1202 u8 bcCount = 1; /* only support single buffer */
1203
1204 /* Checks is the requested message size can be allocated in this queue*/
1205 if (messageSize > 64) {
1206 *messagePtr = NULL;
1207 return -1;
1208 }
1209
1210 /* Stores the new consumer index */
1211 consumer_index = pm8001_read_32(circularQ->ci_virt);
1212 circularQ->consumer_index = cpu_to_le32(consumer_index);
1213 if (((circularQ->producer_idx + bcCount) % 256) ==
1214 circularQ->consumer_index) {
1215 *messagePtr = NULL;
1216 return -1;
1217 }
1218 /* get memory IOMB buffer address */
1219 offset = circularQ->producer_idx * 64;
1220 /* increment to next bcCount element */
1221 circularQ->producer_idx = (circularQ->producer_idx + bcCount) % 256;
1222 /* Adds that distance to the base of the region virtual address plus
1223 the message header size*/
1224 msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + offset);
1225 *messagePtr = ((void *)msgHeader) + sizeof(struct mpi_msg_hdr);
1226 return 0;
1227}
1228
1229/**
1230 * mpi_build_cmd- build the message queue for transfer, update the PI to FW
1231 * to tell the fw to get this message from IOMB.
1232 * @pm8001_ha: our hba card information
1233 * @circularQ: the inbound queue we want to transfer to HBA.
1234 * @opCode: the operation code represents commands which LLDD and fw recognized.
1235 * @payload: the command payload of each operation command.
1236 */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1237static int mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1238 struct inbound_queue_table *circularQ,
1239 u32 opCode, void *payload)
1240{
1241 u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
1242 u32 responseQueue = 0;
1243 void *pMessage;
1244
1245 if (mpi_msg_free_get(circularQ, 64, &pMessage) < 0) {
1246 PM8001_IO_DBG(pm8001_ha,
1247 pm8001_printk("No free mpi buffer \n"));
1248 return -1;
1249 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1250 BUG_ON(!payload);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1251 /*Copy to the payload*/
1252 memcpy(pMessage, payload, (64 - sizeof(struct mpi_msg_hdr)));
1253
1254 /*Build the header*/
1255 Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
1256 | ((responseQueue & 0x3F) << 16)
1257 | ((category & 0xF) << 12) | (opCode & 0xFFF));
1258
1259 pm8001_write_32((pMessage - 4), 0, cpu_to_le32(Header));
1260 /*Update the PI to the firmware*/
1261 pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
1262 circularQ->pi_offset, circularQ->producer_idx);
1263 PM8001_IO_DBG(pm8001_ha,
1264 pm8001_printk("after PI= %d CI= %d \n", circularQ->producer_idx,
1265 circularQ->consumer_index));
1266 return 0;
1267}
1268
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1269static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1270 struct outbound_queue_table *circularQ, u8 bc)
1271{
1272 u32 producer_index;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1273 struct mpi_msg_hdr *msgHeader;
1274 struct mpi_msg_hdr *pOutBoundMsgHeader;
1275
1276 msgHeader = (struct mpi_msg_hdr *)(pMsg - sizeof(struct mpi_msg_hdr));
1277 pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
1278 circularQ->consumer_idx * 64);
1279 if (pOutBoundMsgHeader != msgHeader) {
1280 PM8001_FAIL_DBG(pm8001_ha,
1281 pm8001_printk("consumer_idx = %d msgHeader = %p\n",
1282 circularQ->consumer_idx, msgHeader));
1283
1284 /* Update the producer index from SPC */
1285 producer_index = pm8001_read_32(circularQ->pi_virt);
1286 circularQ->producer_index = cpu_to_le32(producer_index);
1287 PM8001_FAIL_DBG(pm8001_ha,
1288 pm8001_printk("consumer_idx = %d producer_index = %d"
1289 "msgHeader = %p\n", circularQ->consumer_idx,
1290 circularQ->producer_index, msgHeader));
1291 return 0;
1292 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1293 /* free the circular queue buffer elements associated with the message*/
1294 circularQ->consumer_idx = (circularQ->consumer_idx + bc) % 256;
1295 /* update the CI of outbound queue */
1296 pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
1297 circularQ->consumer_idx);
1298 /* Update the producer index from SPC*/
1299 producer_index = pm8001_read_32(circularQ->pi_virt);
1300 circularQ->producer_index = cpu_to_le32(producer_index);
1301 PM8001_IO_DBG(pm8001_ha,
1302 pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
1303 circularQ->producer_index));
1304 return 0;
1305}
1306
1307/**
1308 * mpi_msg_consume- get the MPI message from outbound queue message table.
1309 * @pm8001_ha: our hba card information
1310 * @circularQ: the outbound queue table.
1311 * @messagePtr1: the message contents of this outbound message.
1312 * @pBC: the message size.
1313 */
1314static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
1315 struct outbound_queue_table *circularQ,
1316 void **messagePtr1, u8 *pBC)
1317{
1318 struct mpi_msg_hdr *msgHeader;
1319 __le32 msgHeader_tmp;
1320 u32 header_tmp;
1321 do {
1322 /* If there are not-yet-delivered messages ... */
1323 if (circularQ->producer_index != circularQ->consumer_idx) {
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1324 /*Get the pointer to the circular queue buffer element*/
1325 msgHeader = (struct mpi_msg_hdr *)
1326 (circularQ->base_virt +
1327 circularQ->consumer_idx * 64);
1328 /* read header */
1329 header_tmp = pm8001_read_32(msgHeader);
1330 msgHeader_tmp = cpu_to_le32(header_tmp);
1331 if (0 != (msgHeader_tmp & 0x80000000)) {
1332 if (OPC_OUB_SKIP_ENTRY !=
1333 (msgHeader_tmp & 0xfff)) {
1334 *messagePtr1 =
1335 ((u8 *)msgHeader) +
1336 sizeof(struct mpi_msg_hdr);
1337 *pBC = (u8)((msgHeader_tmp >> 24) &
1338 0x1f);
1339 PM8001_IO_DBG(pm8001_ha,
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1340 pm8001_printk(": CI=%d PI=%d "
1341 "msgHeader=%x\n",
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1342 circularQ->consumer_idx,
1343 circularQ->producer_index,
1344 msgHeader_tmp));
1345 return MPI_IO_STATUS_SUCCESS;
1346 } else {
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1347 circularQ->consumer_idx =
1348 (circularQ->consumer_idx +
1349 ((msgHeader_tmp >> 24) & 0x1f))
1350 % 256;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1351 msgHeader_tmp = 0;
1352 pm8001_write_32(msgHeader, 0, 0);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1353 /* update the CI of outbound queue */
1354 pm8001_cw32(pm8001_ha,
1355 circularQ->ci_pci_bar,
1356 circularQ->ci_offset,
1357 circularQ->consumer_idx);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1358 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1359 } else {
1360 circularQ->consumer_idx =
1361 (circularQ->consumer_idx +
1362 ((msgHeader_tmp >> 24) & 0x1f)) % 256;
1363 msgHeader_tmp = 0;
1364 pm8001_write_32(msgHeader, 0, 0);
1365 /* update the CI of outbound queue */
1366 pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar,
1367 circularQ->ci_offset,
1368 circularQ->consumer_idx);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1369 return MPI_IO_STATUS_FAIL;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1370 }
1371 } else {
1372 u32 producer_index;
1373 void *pi_virt = circularQ->pi_virt;
1374 /* Update the producer index from SPC */
1375 producer_index = pm8001_read_32(pi_virt);
1376 circularQ->producer_index = cpu_to_le32(producer_index);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1377 }
1378 } while (circularQ->producer_index != circularQ->consumer_idx);
1379 /* while we don't have any more not-yet-delivered message */
1380 /* report empty */
1381 return MPI_IO_STATUS_BUSY;
1382}
1383
1384static void pm8001_work_queue(struct work_struct *work)
1385{
1386 struct delayed_work *dw = container_of(work, struct delayed_work, work);
1387 struct pm8001_wq *wq = container_of(dw, struct pm8001_wq, work_q);
1388 struct pm8001_device *pm8001_dev;
1389 struct domain_device *dev;
1390
1391 switch (wq->handler) {
1392 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
1393 pm8001_dev = wq->data;
1394 dev = pm8001_dev->sas_device;
1395 pm8001_I_T_nexus_reset(dev);
1396 break;
1397 case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
1398 pm8001_dev = wq->data;
1399 dev = pm8001_dev->sas_device;
1400 pm8001_I_T_nexus_reset(dev);
1401 break;
1402 case IO_DS_IN_ERROR:
1403 pm8001_dev = wq->data;
1404 dev = pm8001_dev->sas_device;
1405 pm8001_I_T_nexus_reset(dev);
1406 break;
1407 case IO_DS_NON_OPERATIONAL:
1408 pm8001_dev = wq->data;
1409 dev = pm8001_dev->sas_device;
1410 pm8001_I_T_nexus_reset(dev);
1411 break;
1412 }
1413 list_del(&wq->entry);
1414 kfree(wq);
1415}
1416
1417static int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
1418 int handler)
1419{
1420 struct pm8001_wq *wq;
1421 int ret = 0;
1422
1423 wq = kmalloc(sizeof(struct pm8001_wq), GFP_ATOMIC);
1424 if (wq) {
1425 wq->pm8001_ha = pm8001_ha;
1426 wq->data = data;
1427 wq->handler = handler;
1428 INIT_DELAYED_WORK(&wq->work_q, pm8001_work_queue);
1429 list_add_tail(&wq->entry, &pm8001_ha->wq_list);
1430 schedule_delayed_work(&wq->work_q, 0);
1431 } else
1432 ret = -ENOMEM;
1433
1434 return ret;
1435}
1436
1437/**
1438 * mpi_ssp_completion- process the event that FW response to the SSP request.
1439 * @pm8001_ha: our hba card information
1440 * @piomb: the message contents of this outbound message.
1441 *
1442 * When FW has completed a ssp request for example a IO request, after it has
1443 * filled the SG data with the data, it will trigger this event represent
1444 * that he has finished the job,please check the coresponding buffer.
1445 * So we will tell the caller who maybe waiting the result to tell upper layer
1446 * that the task has been finished.
1447 */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1448static void
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1449mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
1450{
1451 struct sas_task *t;
1452 struct pm8001_ccb_info *ccb;
1453 unsigned long flags;
1454 u32 status;
1455 u32 param;
1456 u32 tag;
1457 struct ssp_completion_resp *psspPayload;
1458 struct task_status_struct *ts;
1459 struct ssp_response_iu *iu;
1460 struct pm8001_device *pm8001_dev;
1461 psspPayload = (struct ssp_completion_resp *)(piomb + 4);
1462 status = le32_to_cpu(psspPayload->status);
1463 tag = le32_to_cpu(psspPayload->tag);
1464 ccb = &pm8001_ha->ccb_info[tag];
1465 pm8001_dev = ccb->device;
1466 param = le32_to_cpu(psspPayload->param);
1467
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1468 t = ccb->task;
1469
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1470 if (status && status != IO_UNDERFLOW)
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1471 PM8001_FAIL_DBG(pm8001_ha,
1472 pm8001_printk("sas IO status 0x%x\n", status));
1473 if (unlikely(!t || !t->lldd_task || !t->dev))
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1474 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1475 ts = &t->task_status;
1476 switch (status) {
1477 case IO_SUCCESS:
1478 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
1479 ",param = %d \n", param));
1480 if (param == 0) {
1481 ts->resp = SAS_TASK_COMPLETE;
1482 ts->stat = SAM_GOOD;
1483 } else {
1484 ts->resp = SAS_TASK_COMPLETE;
1485 ts->stat = SAS_PROTO_RESPONSE;
1486 ts->residual = param;
1487 iu = &psspPayload->ssp_resp_iu;
1488 sas_ssp_task_response(pm8001_ha->dev, t, iu);
1489 }
1490 if (pm8001_dev)
1491 pm8001_dev->running_req--;
1492 break;
1493 case IO_ABORTED:
1494 PM8001_IO_DBG(pm8001_ha,
1495 pm8001_printk("IO_ABORTED IOMB Tag \n"));
1496 ts->resp = SAS_TASK_COMPLETE;
1497 ts->stat = SAS_ABORTED_TASK;
1498 break;
1499 case IO_UNDERFLOW:
1500 /* SSP Completion with error */
1501 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
1502 ",param = %d \n", param));
1503 ts->resp = SAS_TASK_COMPLETE;
1504 ts->stat = SAS_DATA_UNDERRUN;
1505 ts->residual = param;
1506 if (pm8001_dev)
1507 pm8001_dev->running_req--;
1508 break;
1509 case IO_NO_DEVICE:
1510 PM8001_IO_DBG(pm8001_ha,
1511 pm8001_printk("IO_NO_DEVICE\n"));
1512 ts->resp = SAS_TASK_UNDELIVERED;
1513 ts->stat = SAS_PHY_DOWN;
1514 break;
1515 case IO_XFER_ERROR_BREAK:
1516 PM8001_IO_DBG(pm8001_ha,
1517 pm8001_printk("IO_XFER_ERROR_BREAK\n"));
1518 ts->resp = SAS_TASK_COMPLETE;
1519 ts->stat = SAS_OPEN_REJECT;
1520 break;
1521 case IO_XFER_ERROR_PHY_NOT_READY:
1522 PM8001_IO_DBG(pm8001_ha,
1523 pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
1524 ts->resp = SAS_TASK_COMPLETE;
1525 ts->stat = SAS_OPEN_REJECT;
1526 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1527 break;
1528 case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
1529 PM8001_IO_DBG(pm8001_ha,
1530 pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
1531 ts->resp = SAS_TASK_COMPLETE;
1532 ts->stat = SAS_OPEN_REJECT;
1533 ts->open_rej_reason = SAS_OREJ_EPROTO;
1534 break;
1535 case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
1536 PM8001_IO_DBG(pm8001_ha,
1537 pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
1538 ts->resp = SAS_TASK_COMPLETE;
1539 ts->stat = SAS_OPEN_REJECT;
1540 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
1541 break;
1542 case IO_OPEN_CNX_ERROR_BREAK:
1543 PM8001_IO_DBG(pm8001_ha,
1544 pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
1545 ts->resp = SAS_TASK_COMPLETE;
1546 ts->stat = SAS_OPEN_REJECT;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1547 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1548 break;
1549 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
1550 PM8001_IO_DBG(pm8001_ha,
1551 pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
1552 ts->resp = SAS_TASK_COMPLETE;
1553 ts->stat = SAS_OPEN_REJECT;
1554 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
1555 if (!t->uldd_task)
1556 pm8001_handle_event(pm8001_ha,
1557 pm8001_dev,
1558 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
1559 break;
1560 case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
1561 PM8001_IO_DBG(pm8001_ha,
1562 pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
1563 ts->resp = SAS_TASK_COMPLETE;
1564 ts->stat = SAS_OPEN_REJECT;
1565 ts->open_rej_reason = SAS_OREJ_BAD_DEST;
1566 break;
1567 case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
1568 PM8001_IO_DBG(pm8001_ha,
1569 pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
1570 "NOT_SUPPORTED\n"));
1571 ts->resp = SAS_TASK_COMPLETE;
1572 ts->stat = SAS_OPEN_REJECT;
1573 ts->open_rej_reason = SAS_OREJ_CONN_RATE;
1574 break;
1575 case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
1576 PM8001_IO_DBG(pm8001_ha,
1577 pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
1578 ts->resp = SAS_TASK_UNDELIVERED;
1579 ts->stat = SAS_OPEN_REJECT;
1580 ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
1581 break;
1582 case IO_XFER_ERROR_NAK_RECEIVED:
1583 PM8001_IO_DBG(pm8001_ha,
1584 pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
1585 ts->resp = SAS_TASK_COMPLETE;
1586 ts->stat = SAS_OPEN_REJECT;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1587 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1588 break;
1589 case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
1590 PM8001_IO_DBG(pm8001_ha,
1591 pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
1592 ts->resp = SAS_TASK_COMPLETE;
1593 ts->stat = SAS_NAK_R_ERR;
1594 break;
1595 case IO_XFER_ERROR_DMA:
1596 PM8001_IO_DBG(pm8001_ha,
1597 pm8001_printk("IO_XFER_ERROR_DMA\n"));
1598 ts->resp = SAS_TASK_COMPLETE;
1599 ts->stat = SAS_OPEN_REJECT;
1600 break;
1601 case IO_XFER_OPEN_RETRY_TIMEOUT:
1602 PM8001_IO_DBG(pm8001_ha,
1603 pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
1604 ts->resp = SAS_TASK_COMPLETE;
1605 ts->stat = SAS_OPEN_REJECT;
1606 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1607 break;
1608 case IO_XFER_ERROR_OFFSET_MISMATCH:
1609 PM8001_IO_DBG(pm8001_ha,
1610 pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
1611 ts->resp = SAS_TASK_COMPLETE;
1612 ts->stat = SAS_OPEN_REJECT;
1613 break;
1614 case IO_PORT_IN_RESET:
1615 PM8001_IO_DBG(pm8001_ha,
1616 pm8001_printk("IO_PORT_IN_RESET\n"));
1617 ts->resp = SAS_TASK_COMPLETE;
1618 ts->stat = SAS_OPEN_REJECT;
1619 break;
1620 case IO_DS_NON_OPERATIONAL:
1621 PM8001_IO_DBG(pm8001_ha,
1622 pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
1623 ts->resp = SAS_TASK_COMPLETE;
1624 ts->stat = SAS_OPEN_REJECT;
1625 if (!t->uldd_task)
1626 pm8001_handle_event(pm8001_ha,
1627 pm8001_dev,
1628 IO_DS_NON_OPERATIONAL);
1629 break;
1630 case IO_DS_IN_RECOVERY:
1631 PM8001_IO_DBG(pm8001_ha,
1632 pm8001_printk("IO_DS_IN_RECOVERY\n"));
1633 ts->resp = SAS_TASK_COMPLETE;
1634 ts->stat = SAS_OPEN_REJECT;
1635 break;
1636 case IO_TM_TAG_NOT_FOUND:
1637 PM8001_IO_DBG(pm8001_ha,
1638 pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
1639 ts->resp = SAS_TASK_COMPLETE;
1640 ts->stat = SAS_OPEN_REJECT;
1641 break;
1642 case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
1643 PM8001_IO_DBG(pm8001_ha,
1644 pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
1645 ts->resp = SAS_TASK_COMPLETE;
1646 ts->stat = SAS_OPEN_REJECT;
1647 break;
1648 case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
1649 PM8001_IO_DBG(pm8001_ha,
1650 pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
1651 ts->resp = SAS_TASK_COMPLETE;
1652 ts->stat = SAS_OPEN_REJECT;
1653 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1654 default:
1655 PM8001_IO_DBG(pm8001_ha,
1656 pm8001_printk("Unknown status 0x%x\n", status));
1657 /* not allowed case. Therefore, return failed status */
1658 ts->resp = SAS_TASK_COMPLETE;
1659 ts->stat = SAS_OPEN_REJECT;
1660 break;
1661 }
1662 PM8001_IO_DBG(pm8001_ha,
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1663 pm8001_printk("scsi_status = %x \n ",
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1664 psspPayload->ssp_resp_iu.status));
1665 spin_lock_irqsave(&t->task_state_lock, flags);
1666 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
1667 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
1668 t->task_state_flags |= SAS_TASK_STATE_DONE;
1669 if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
1670 spin_unlock_irqrestore(&t->task_state_lock, flags);
1671 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
1672 " io_status 0x%x resp 0x%x "
1673 "stat 0x%x but aborted by upper layer!\n",
1674 t, status, ts->resp, ts->stat));
1675 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
1676 } else {
1677 spin_unlock_irqrestore(&t->task_state_lock, flags);
1678 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
1679 mb();/* in order to force CPU ordering */
1680 t->task_done(t);
1681 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1682}
1683
1684/*See the comments for mpi_ssp_completion */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1685static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1686{
1687 struct sas_task *t;
1688 unsigned long flags;
1689 struct task_status_struct *ts;
1690 struct pm8001_ccb_info *ccb;
1691 struct pm8001_device *pm8001_dev;
1692 struct ssp_event_resp *psspPayload =
1693 (struct ssp_event_resp *)(piomb + 4);
1694 u32 event = le32_to_cpu(psspPayload->event);
1695 u32 tag = le32_to_cpu(psspPayload->tag);
1696 u32 port_id = le32_to_cpu(psspPayload->port_id);
1697 u32 dev_id = le32_to_cpu(psspPayload->device_id);
1698
1699 ccb = &pm8001_ha->ccb_info[tag];
1700 t = ccb->task;
1701 pm8001_dev = ccb->device;
1702 if (event)
1703 PM8001_FAIL_DBG(pm8001_ha,
1704 pm8001_printk("sas IO status 0x%x\n", event));
1705 if (unlikely(!t || !t->lldd_task || !t->dev))
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1706 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1707 ts = &t->task_status;
1708 PM8001_IO_DBG(pm8001_ha,
1709 pm8001_printk("port_id = %x,device_id = %x\n",
1710 port_id, dev_id));
1711 switch (event) {
1712 case IO_OVERFLOW:
1713 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
1714 ts->resp = SAS_TASK_COMPLETE;
1715 ts->stat = SAS_DATA_OVERRUN;
1716 ts->residual = 0;
1717 if (pm8001_dev)
1718 pm8001_dev->running_req--;
1719 break;
1720 case IO_XFER_ERROR_BREAK:
1721 PM8001_IO_DBG(pm8001_ha,
1722 pm8001_printk("IO_XFER_ERROR_BREAK\n"));
1723 ts->resp = SAS_TASK_COMPLETE;
1724 ts->stat = SAS_INTERRUPTED;
1725 break;
1726 case IO_XFER_ERROR_PHY_NOT_READY:
1727 PM8001_IO_DBG(pm8001_ha,
1728 pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
1729 ts->resp = SAS_TASK_COMPLETE;
1730 ts->stat = SAS_OPEN_REJECT;
1731 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1732 break;
1733 case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
1734 PM8001_IO_DBG(pm8001_ha,
1735 pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
1736 "_SUPPORTED\n"));
1737 ts->resp = SAS_TASK_COMPLETE;
1738 ts->stat = SAS_OPEN_REJECT;
1739 ts->open_rej_reason = SAS_OREJ_EPROTO;
1740 break;
1741 case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
1742 PM8001_IO_DBG(pm8001_ha,
1743 pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
1744 ts->resp = SAS_TASK_COMPLETE;
1745 ts->stat = SAS_OPEN_REJECT;
1746 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
1747 break;
1748 case IO_OPEN_CNX_ERROR_BREAK:
1749 PM8001_IO_DBG(pm8001_ha,
1750 pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
1751 ts->resp = SAS_TASK_COMPLETE;
1752 ts->stat = SAS_OPEN_REJECT;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1753 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1754 break;
1755 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
1756 PM8001_IO_DBG(pm8001_ha,
1757 pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
1758 ts->resp = SAS_TASK_COMPLETE;
1759 ts->stat = SAS_OPEN_REJECT;
1760 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
1761 if (!t->uldd_task)
1762 pm8001_handle_event(pm8001_ha,
1763 pm8001_dev,
1764 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
1765 break;
1766 case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
1767 PM8001_IO_DBG(pm8001_ha,
1768 pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
1769 ts->resp = SAS_TASK_COMPLETE;
1770 ts->stat = SAS_OPEN_REJECT;
1771 ts->open_rej_reason = SAS_OREJ_BAD_DEST;
1772 break;
1773 case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
1774 PM8001_IO_DBG(pm8001_ha,
1775 pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
1776 "NOT_SUPPORTED\n"));
1777 ts->resp = SAS_TASK_COMPLETE;
1778 ts->stat = SAS_OPEN_REJECT;
1779 ts->open_rej_reason = SAS_OREJ_CONN_RATE;
1780 break;
1781 case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
1782 PM8001_IO_DBG(pm8001_ha,
1783 pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
1784 ts->resp = SAS_TASK_COMPLETE;
1785 ts->stat = SAS_OPEN_REJECT;
1786 ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
1787 break;
1788 case IO_XFER_ERROR_NAK_RECEIVED:
1789 PM8001_IO_DBG(pm8001_ha,
1790 pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
1791 ts->resp = SAS_TASK_COMPLETE;
1792 ts->stat = SAS_OPEN_REJECT;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1793 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1794 break;
1795 case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
1796 PM8001_IO_DBG(pm8001_ha,
1797 pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
1798 ts->resp = SAS_TASK_COMPLETE;
1799 ts->stat = SAS_NAK_R_ERR;
1800 break;
1801 case IO_XFER_OPEN_RETRY_TIMEOUT:
1802 PM8001_IO_DBG(pm8001_ha,
1803 pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
1804 ts->resp = SAS_TASK_COMPLETE;
1805 ts->stat = SAS_OPEN_REJECT;
1806 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1807 break;
1808 case IO_XFER_ERROR_UNEXPECTED_PHASE:
1809 PM8001_IO_DBG(pm8001_ha,
1810 pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
1811 ts->resp = SAS_TASK_COMPLETE;
1812 ts->stat = SAS_DATA_OVERRUN;
1813 break;
1814 case IO_XFER_ERROR_XFER_RDY_OVERRUN:
1815 PM8001_IO_DBG(pm8001_ha,
1816 pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
1817 ts->resp = SAS_TASK_COMPLETE;
1818 ts->stat = SAS_DATA_OVERRUN;
1819 break;
1820 case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
1821 PM8001_IO_DBG(pm8001_ha,
1822 pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
1823 ts->resp = SAS_TASK_COMPLETE;
1824 ts->stat = SAS_DATA_OVERRUN;
1825 break;
1826 case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
1827 PM8001_IO_DBG(pm8001_ha,
1828 pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
1829 ts->resp = SAS_TASK_COMPLETE;
1830 ts->stat = SAS_DATA_OVERRUN;
1831 break;
1832 case IO_XFER_ERROR_OFFSET_MISMATCH:
1833 PM8001_IO_DBG(pm8001_ha,
1834 pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
1835 ts->resp = SAS_TASK_COMPLETE;
1836 ts->stat = SAS_DATA_OVERRUN;
1837 break;
1838 case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
1839 PM8001_IO_DBG(pm8001_ha,
1840 pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
1841 ts->resp = SAS_TASK_COMPLETE;
1842 ts->stat = SAS_DATA_OVERRUN;
1843 break;
1844 case IO_XFER_CMD_FRAME_ISSUED:
1845 PM8001_IO_DBG(pm8001_ha,
1846 pm8001_printk(" IO_XFER_CMD_FRAME_ISSUED\n"));
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1847 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1848 default:
1849 PM8001_IO_DBG(pm8001_ha,
1850 pm8001_printk("Unknown status 0x%x\n", event));
1851 /* not allowed case. Therefore, return failed status */
1852 ts->resp = SAS_TASK_COMPLETE;
1853 ts->stat = SAS_DATA_OVERRUN;
1854 break;
1855 }
1856 spin_lock_irqsave(&t->task_state_lock, flags);
1857 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
1858 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
1859 t->task_state_flags |= SAS_TASK_STATE_DONE;
1860 if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
1861 spin_unlock_irqrestore(&t->task_state_lock, flags);
1862 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
1863 " event 0x%x resp 0x%x "
1864 "stat 0x%x but aborted by upper layer!\n",
1865 t, event, ts->resp, ts->stat));
1866 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
1867 } else {
1868 spin_unlock_irqrestore(&t->task_state_lock, flags);
1869 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
1870 mb();/* in order to force CPU ordering */
1871 t->task_done(t);
1872 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1873}
1874
1875/*See the comments for mpi_ssp_completion */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1876static void
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1877mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
1878{
1879 struct sas_task *t;
1880 struct pm8001_ccb_info *ccb;
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]1881 unsigned long flags = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1882 u32 param;
1883 u32 status;
1884 u32 tag;
1885 struct sata_completion_resp *psataPayload;
1886 struct task_status_struct *ts;
1887 struct ata_task_resp *resp ;
1888 u32 *sata_resp;
1889 struct pm8001_device *pm8001_dev;
1890
1891 psataPayload = (struct sata_completion_resp *)(piomb + 4);
1892 status = le32_to_cpu(psataPayload->status);
1893 tag = le32_to_cpu(psataPayload->tag);
1894
1895 ccb = &pm8001_ha->ccb_info[tag];
1896 param = le32_to_cpu(psataPayload->param);
1897 t = ccb->task;
1898 ts = &t->task_status;
1899 pm8001_dev = ccb->device;
1900 if (status)
1901 PM8001_FAIL_DBG(pm8001_ha,
1902 pm8001_printk("sata IO status 0x%x\n", status));
1903 if (unlikely(!t || !t->lldd_task || !t->dev))
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]1904 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]1905
1906 switch (status) {
1907 case IO_SUCCESS:
1908 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
1909 if (param == 0) {
1910 ts->resp = SAS_TASK_COMPLETE;
1911 ts->stat = SAM_GOOD;
1912 } else {
1913 u8 len;
1914 ts->resp = SAS_TASK_COMPLETE;
1915 ts->stat = SAS_PROTO_RESPONSE;
1916 ts->residual = param;
1917 PM8001_IO_DBG(pm8001_ha,
1918 pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
1919 param));
1920 sata_resp = &psataPayload->sata_resp[0];
1921 resp = (struct ata_task_resp *)ts->buf;
1922 if (t->ata_task.dma_xfer == 0 &&
1923 t->data_dir == PCI_DMA_FROMDEVICE) {
1924 len = sizeof(struct pio_setup_fis);
1925 PM8001_IO_DBG(pm8001_ha,
1926 pm8001_printk("PIO read len = %d\n", len));
1927 } else if (t->ata_task.use_ncq) {
1928 len = sizeof(struct set_dev_bits_fis);
1929 PM8001_IO_DBG(pm8001_ha,
1930 pm8001_printk("FPDMA len = %d\n", len));
1931 } else {
1932 len = sizeof(struct dev_to_host_fis);
1933 PM8001_IO_DBG(pm8001_ha,
1934 pm8001_printk("other len = %d\n", len));
1935 }
1936 if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
1937 resp->frame_len = len;
1938 memcpy(&resp->ending_fis[0], sata_resp, len);
1939 ts->buf_valid_size = sizeof(*resp);
1940 } else
1941 PM8001_IO_DBG(pm8001_ha,
1942 pm8001_printk("response to large \n"));
1943 }
1944 if (pm8001_dev)
1945 pm8001_dev->running_req--;
1946 break;
1947 case IO_ABORTED:
1948 PM8001_IO_DBG(pm8001_ha,
1949 pm8001_printk("IO_ABORTED IOMB Tag \n"));
1950 ts->resp = SAS_TASK_COMPLETE;
1951 ts->stat = SAS_ABORTED_TASK;
1952 if (pm8001_dev)
1953 pm8001_dev->running_req--;
1954 break;
1955 /* following cases are to do cases */
1956 case IO_UNDERFLOW:
1957 /* SATA Completion with error */
1958 PM8001_IO_DBG(pm8001_ha,
1959 pm8001_printk("IO_UNDERFLOW param = %d\n", param));
1960 ts->resp = SAS_TASK_COMPLETE;
1961 ts->stat = SAS_DATA_UNDERRUN;
1962 ts->residual = param;
1963 if (pm8001_dev)
1964 pm8001_dev->running_req--;
1965 break;
1966 case IO_NO_DEVICE:
1967 PM8001_IO_DBG(pm8001_ha,
1968 pm8001_printk("IO_NO_DEVICE\n"));
1969 ts->resp = SAS_TASK_UNDELIVERED;
1970 ts->stat = SAS_PHY_DOWN;
1971 break;
1972 case IO_XFER_ERROR_BREAK:
1973 PM8001_IO_DBG(pm8001_ha,
1974 pm8001_printk("IO_XFER_ERROR_BREAK\n"));
1975 ts->resp = SAS_TASK_COMPLETE;
1976 ts->stat = SAS_INTERRUPTED;
1977 break;
1978 case IO_XFER_ERROR_PHY_NOT_READY:
1979 PM8001_IO_DBG(pm8001_ha,
1980 pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
1981 ts->resp = SAS_TASK_COMPLETE;
1982 ts->stat = SAS_OPEN_REJECT;
1983 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
1984 break;
1985 case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
1986 PM8001_IO_DBG(pm8001_ha,
1987 pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
1988 "_SUPPORTED\n"));
1989 ts->resp = SAS_TASK_COMPLETE;
1990 ts->stat = SAS_OPEN_REJECT;
1991 ts->open_rej_reason = SAS_OREJ_EPROTO;
1992 break;
1993 case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
1994 PM8001_IO_DBG(pm8001_ha,
1995 pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
1996 ts->resp = SAS_TASK_COMPLETE;
1997 ts->stat = SAS_OPEN_REJECT;
1998 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
1999 break;
2000 case IO_OPEN_CNX_ERROR_BREAK:
2001 PM8001_IO_DBG(pm8001_ha,
2002 pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
2003 ts->resp = SAS_TASK_COMPLETE;
2004 ts->stat = SAS_OPEN_REJECT;
2005 ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
2006 break;
2007 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
2008 PM8001_IO_DBG(pm8001_ha,
2009 pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
2010 ts->resp = SAS_TASK_COMPLETE;
2011 ts->stat = SAS_DEV_NO_RESPONSE;
2012 if (!t->uldd_task) {
2013 pm8001_handle_event(pm8001_ha,
2014 pm8001_dev,
2015 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
2016 ts->resp = SAS_TASK_UNDELIVERED;
2017 ts->stat = SAS_QUEUE_FULL;
2018 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2019 mb();/*in order to force CPU ordering*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2020 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2021 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2022 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2023 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2024 }
2025 break;
2026 case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
2027 PM8001_IO_DBG(pm8001_ha,
2028 pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
2029 ts->resp = SAS_TASK_UNDELIVERED;
2030 ts->stat = SAS_OPEN_REJECT;
2031 ts->open_rej_reason = SAS_OREJ_BAD_DEST;
2032 if (!t->uldd_task) {
2033 pm8001_handle_event(pm8001_ha,
2034 pm8001_dev,
2035 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
2036 ts->resp = SAS_TASK_UNDELIVERED;
2037 ts->stat = SAS_QUEUE_FULL;
2038 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2039 mb();/*ditto*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2040 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2041 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2042 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2043 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2044 }
2045 break;
2046 case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
2047 PM8001_IO_DBG(pm8001_ha,
2048 pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
2049 "NOT_SUPPORTED\n"));
2050 ts->resp = SAS_TASK_COMPLETE;
2051 ts->stat = SAS_OPEN_REJECT;
2052 ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2053 break;
2054 case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
2055 PM8001_IO_DBG(pm8001_ha,
2056 pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
2057 "_BUSY\n"));
2058 ts->resp = SAS_TASK_COMPLETE;
2059 ts->stat = SAS_DEV_NO_RESPONSE;
2060 if (!t->uldd_task) {
2061 pm8001_handle_event(pm8001_ha,
2062 pm8001_dev,
2063 IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
2064 ts->resp = SAS_TASK_UNDELIVERED;
2065 ts->stat = SAS_QUEUE_FULL;
2066 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2067 mb();/* ditto*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2068 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2069 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2070 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2071 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2072 }
2073 break;
2074 case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
2075 PM8001_IO_DBG(pm8001_ha,
2076 pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
2077 ts->resp = SAS_TASK_COMPLETE;
2078 ts->stat = SAS_OPEN_REJECT;
2079 ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
2080 break;
2081 case IO_XFER_ERROR_NAK_RECEIVED:
2082 PM8001_IO_DBG(pm8001_ha,
2083 pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
2084 ts->resp = SAS_TASK_COMPLETE;
2085 ts->stat = SAS_NAK_R_ERR;
2086 break;
2087 case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
2088 PM8001_IO_DBG(pm8001_ha,
2089 pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
2090 ts->resp = SAS_TASK_COMPLETE;
2091 ts->stat = SAS_NAK_R_ERR;
2092 break;
2093 case IO_XFER_ERROR_DMA:
2094 PM8001_IO_DBG(pm8001_ha,
2095 pm8001_printk("IO_XFER_ERROR_DMA\n"));
2096 ts->resp = SAS_TASK_COMPLETE;
2097 ts->stat = SAS_ABORTED_TASK;
2098 break;
2099 case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
2100 PM8001_IO_DBG(pm8001_ha,
2101 pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
2102 ts->resp = SAS_TASK_UNDELIVERED;
2103 ts->stat = SAS_DEV_NO_RESPONSE;
2104 break;
2105 case IO_XFER_ERROR_REJECTED_NCQ_MODE:
2106 PM8001_IO_DBG(pm8001_ha,
2107 pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
2108 ts->resp = SAS_TASK_COMPLETE;
2109 ts->stat = SAS_DATA_UNDERRUN;
2110 break;
2111 case IO_XFER_OPEN_RETRY_TIMEOUT:
2112 PM8001_IO_DBG(pm8001_ha,
2113 pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
2114 ts->resp = SAS_TASK_COMPLETE;
2115 ts->stat = SAS_OPEN_TO;
2116 break;
2117 case IO_PORT_IN_RESET:
2118 PM8001_IO_DBG(pm8001_ha,
2119 pm8001_printk("IO_PORT_IN_RESET\n"));
2120 ts->resp = SAS_TASK_COMPLETE;
2121 ts->stat = SAS_DEV_NO_RESPONSE;
2122 break;
2123 case IO_DS_NON_OPERATIONAL:
2124 PM8001_IO_DBG(pm8001_ha,
2125 pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
2126 ts->resp = SAS_TASK_COMPLETE;
2127 ts->stat = SAS_DEV_NO_RESPONSE;
2128 if (!t->uldd_task) {
2129 pm8001_handle_event(pm8001_ha, pm8001_dev,
2130 IO_DS_NON_OPERATIONAL);
2131 ts->resp = SAS_TASK_UNDELIVERED;
2132 ts->stat = SAS_QUEUE_FULL;
2133 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2134 mb();/*ditto*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2135 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2136 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2137 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2138 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2139 }
2140 break;
2141 case IO_DS_IN_RECOVERY:
2142 PM8001_IO_DBG(pm8001_ha,
2143 pm8001_printk(" IO_DS_IN_RECOVERY\n"));
2144 ts->resp = SAS_TASK_COMPLETE;
2145 ts->stat = SAS_DEV_NO_RESPONSE;
2146 break;
2147 case IO_DS_IN_ERROR:
2148 PM8001_IO_DBG(pm8001_ha,
2149 pm8001_printk("IO_DS_IN_ERROR\n"));
2150 ts->resp = SAS_TASK_COMPLETE;
2151 ts->stat = SAS_DEV_NO_RESPONSE;
2152 if (!t->uldd_task) {
2153 pm8001_handle_event(pm8001_ha, pm8001_dev,
2154 IO_DS_IN_ERROR);
2155 ts->resp = SAS_TASK_UNDELIVERED;
2156 ts->stat = SAS_QUEUE_FULL;
2157 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2158 mb();/*ditto*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2159 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2160 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2161 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2162 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2163 }
2164 break;
2165 case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
2166 PM8001_IO_DBG(pm8001_ha,
2167 pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
2168 ts->resp = SAS_TASK_COMPLETE;
2169 ts->stat = SAS_OPEN_REJECT;
2170 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2171 default:
2172 PM8001_IO_DBG(pm8001_ha,
2173 pm8001_printk("Unknown status 0x%x\n", status));
2174 /* not allowed case. Therefore, return failed status */
2175 ts->resp = SAS_TASK_COMPLETE;
2176 ts->stat = SAS_DEV_NO_RESPONSE;
2177 break;
2178 }
2179 spin_lock_irqsave(&t->task_state_lock, flags);
2180 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
2181 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
2182 t->task_state_flags |= SAS_TASK_STATE_DONE;
2183 if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
2184 spin_unlock_irqrestore(&t->task_state_lock, flags);
2185 PM8001_FAIL_DBG(pm8001_ha,
2186 pm8001_printk("task 0x%p done with io_status 0x%x"
2187 " resp 0x%x stat 0x%x but aborted by upper layer!\n",
2188 t, status, ts->resp, ts->stat));
2189 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2190 } else if (t->uldd_task) {
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2191 spin_unlock_irqrestore(&t->task_state_lock, flags);
2192 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2193 mb();/* ditto */
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2194 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2195 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2196 spin_lock_irqsave(&pm8001_ha->lock, flags);
2197 } else if (!t->uldd_task) {
2198 spin_unlock_irqrestore(&t->task_state_lock, flags);
2199 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2200 mb();/*ditto*/
2201 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
2202 t->task_done(t);
2203 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2204 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2205}
2206
2207/*See the comments for mpi_ssp_completion */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2208static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2209{
2210 struct sas_task *t;
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2211 unsigned long flags = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2212 struct task_status_struct *ts;
2213 struct pm8001_ccb_info *ccb;
2214 struct pm8001_device *pm8001_dev;
2215 struct sata_event_resp *psataPayload =
2216 (struct sata_event_resp *)(piomb + 4);
2217 u32 event = le32_to_cpu(psataPayload->event);
2218 u32 tag = le32_to_cpu(psataPayload->tag);
2219 u32 port_id = le32_to_cpu(psataPayload->port_id);
2220 u32 dev_id = le32_to_cpu(psataPayload->device_id);
2221
2222 ccb = &pm8001_ha->ccb_info[tag];
2223 t = ccb->task;
2224 pm8001_dev = ccb->device;
2225 if (event)
2226 PM8001_FAIL_DBG(pm8001_ha,
2227 pm8001_printk("sata IO status 0x%x\n", event));
2228 if (unlikely(!t || !t->lldd_task || !t->dev))
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2229 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2230 ts = &t->task_status;
2231 PM8001_IO_DBG(pm8001_ha,
2232 pm8001_printk("port_id = %x,device_id = %x\n",
2233 port_id, dev_id));
2234 switch (event) {
2235 case IO_OVERFLOW:
2236 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
2237 ts->resp = SAS_TASK_COMPLETE;
2238 ts->stat = SAS_DATA_OVERRUN;
2239 ts->residual = 0;
2240 if (pm8001_dev)
2241 pm8001_dev->running_req--;
2242 break;
2243 case IO_XFER_ERROR_BREAK:
2244 PM8001_IO_DBG(pm8001_ha,
2245 pm8001_printk("IO_XFER_ERROR_BREAK\n"));
2246 ts->resp = SAS_TASK_COMPLETE;
2247 ts->stat = SAS_INTERRUPTED;
2248 break;
2249 case IO_XFER_ERROR_PHY_NOT_READY:
2250 PM8001_IO_DBG(pm8001_ha,
2251 pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
2252 ts->resp = SAS_TASK_COMPLETE;
2253 ts->stat = SAS_OPEN_REJECT;
2254 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2255 break;
2256 case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
2257 PM8001_IO_DBG(pm8001_ha,
2258 pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
2259 "_SUPPORTED\n"));
2260 ts->resp = SAS_TASK_COMPLETE;
2261 ts->stat = SAS_OPEN_REJECT;
2262 ts->open_rej_reason = SAS_OREJ_EPROTO;
2263 break;
2264 case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
2265 PM8001_IO_DBG(pm8001_ha,
2266 pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
2267 ts->resp = SAS_TASK_COMPLETE;
2268 ts->stat = SAS_OPEN_REJECT;
2269 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2270 break;
2271 case IO_OPEN_CNX_ERROR_BREAK:
2272 PM8001_IO_DBG(pm8001_ha,
2273 pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
2274 ts->resp = SAS_TASK_COMPLETE;
2275 ts->stat = SAS_OPEN_REJECT;
2276 ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
2277 break;
2278 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
2279 PM8001_IO_DBG(pm8001_ha,
2280 pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
2281 ts->resp = SAS_TASK_UNDELIVERED;
2282 ts->stat = SAS_DEV_NO_RESPONSE;
2283 if (!t->uldd_task) {
2284 pm8001_handle_event(pm8001_ha,
2285 pm8001_dev,
2286 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
2287 ts->resp = SAS_TASK_COMPLETE;
2288 ts->stat = SAS_QUEUE_FULL;
2289 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2290 mb();/*ditto*/
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2291 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2292 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2293 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2294 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2295 }
2296 break;
2297 case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
2298 PM8001_IO_DBG(pm8001_ha,
2299 pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
2300 ts->resp = SAS_TASK_UNDELIVERED;
2301 ts->stat = SAS_OPEN_REJECT;
2302 ts->open_rej_reason = SAS_OREJ_BAD_DEST;
2303 break;
2304 case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
2305 PM8001_IO_DBG(pm8001_ha,
2306 pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
2307 "NOT_SUPPORTED\n"));
2308 ts->resp = SAS_TASK_COMPLETE;
2309 ts->stat = SAS_OPEN_REJECT;
2310 ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2311 break;
2312 case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
2313 PM8001_IO_DBG(pm8001_ha,
2314 pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
2315 ts->resp = SAS_TASK_COMPLETE;
2316 ts->stat = SAS_OPEN_REJECT;
2317 ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
2318 break;
2319 case IO_XFER_ERROR_NAK_RECEIVED:
2320 PM8001_IO_DBG(pm8001_ha,
2321 pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
2322 ts->resp = SAS_TASK_COMPLETE;
2323 ts->stat = SAS_NAK_R_ERR;
2324 break;
2325 case IO_XFER_ERROR_PEER_ABORTED:
2326 PM8001_IO_DBG(pm8001_ha,
2327 pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
2328 ts->resp = SAS_TASK_COMPLETE;
2329 ts->stat = SAS_NAK_R_ERR;
2330 break;
2331 case IO_XFER_ERROR_REJECTED_NCQ_MODE:
2332 PM8001_IO_DBG(pm8001_ha,
2333 pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
2334 ts->resp = SAS_TASK_COMPLETE;
2335 ts->stat = SAS_DATA_UNDERRUN;
2336 break;
2337 case IO_XFER_OPEN_RETRY_TIMEOUT:
2338 PM8001_IO_DBG(pm8001_ha,
2339 pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
2340 ts->resp = SAS_TASK_COMPLETE;
2341 ts->stat = SAS_OPEN_TO;
2342 break;
2343 case IO_XFER_ERROR_UNEXPECTED_PHASE:
2344 PM8001_IO_DBG(pm8001_ha,
2345 pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
2346 ts->resp = SAS_TASK_COMPLETE;
2347 ts->stat = SAS_OPEN_TO;
2348 break;
2349 case IO_XFER_ERROR_XFER_RDY_OVERRUN:
2350 PM8001_IO_DBG(pm8001_ha,
2351 pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
2352 ts->resp = SAS_TASK_COMPLETE;
2353 ts->stat = SAS_OPEN_TO;
2354 break;
2355 case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
2356 PM8001_IO_DBG(pm8001_ha,
2357 pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
2358 ts->resp = SAS_TASK_COMPLETE;
2359 ts->stat = SAS_OPEN_TO;
2360 break;
2361 case IO_XFER_ERROR_OFFSET_MISMATCH:
2362 PM8001_IO_DBG(pm8001_ha,
2363 pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
2364 ts->resp = SAS_TASK_COMPLETE;
2365 ts->stat = SAS_OPEN_TO;
2366 break;
2367 case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
2368 PM8001_IO_DBG(pm8001_ha,
2369 pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
2370 ts->resp = SAS_TASK_COMPLETE;
2371 ts->stat = SAS_OPEN_TO;
2372 break;
2373 case IO_XFER_CMD_FRAME_ISSUED:
2374 PM8001_IO_DBG(pm8001_ha,
2375 pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
2376 break;
2377 case IO_XFER_PIO_SETUP_ERROR:
2378 PM8001_IO_DBG(pm8001_ha,
2379 pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
2380 ts->resp = SAS_TASK_COMPLETE;
2381 ts->stat = SAS_OPEN_TO;
2382 break;
2383 default:
2384 PM8001_IO_DBG(pm8001_ha,
2385 pm8001_printk("Unknown status 0x%x\n", event));
2386 /* not allowed case. Therefore, return failed status */
2387 ts->resp = SAS_TASK_COMPLETE;
2388 ts->stat = SAS_OPEN_TO;
2389 break;
2390 }
2391 spin_lock_irqsave(&t->task_state_lock, flags);
2392 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
2393 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
2394 t->task_state_flags |= SAS_TASK_STATE_DONE;
2395 if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
2396 spin_unlock_irqrestore(&t->task_state_lock, flags);
2397 PM8001_FAIL_DBG(pm8001_ha,
2398 pm8001_printk("task 0x%p done with io_status 0x%x"
2399 " resp 0x%x stat 0x%x but aborted by upper layer!\n",
2400 t, event, ts->resp, ts->stat));
2401 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2402 } else if (t->uldd_task) {
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2403 spin_unlock_irqrestore(&t->task_state_lock, flags);
2404 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2405 mb();/* ditto */
2406 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2407 t->task_done(t);
jack wang9e79e122009-12-07 17:22:36 +0800[diff] [blame]2408 spin_lock_irqsave(&pm8001_ha->lock, flags);
2409 } else if (!t->uldd_task) {
2410 spin_unlock_irqrestore(&t->task_state_lock, flags);
2411 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2412 mb();/*ditto*/
2413 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
2414 t->task_done(t);
2415 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2416 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2417}
2418
2419/*See the comments for mpi_ssp_completion */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2420static void
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2421mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
2422{
2423 u32 param;
2424 struct sas_task *t;
2425 struct pm8001_ccb_info *ccb;
2426 unsigned long flags;
2427 u32 status;
2428 u32 tag;
2429 struct smp_completion_resp *psmpPayload;
2430 struct task_status_struct *ts;
2431 struct pm8001_device *pm8001_dev;
2432
2433 psmpPayload = (struct smp_completion_resp *)(piomb + 4);
2434 status = le32_to_cpu(psmpPayload->status);
2435 tag = le32_to_cpu(psmpPayload->tag);
2436
2437 ccb = &pm8001_ha->ccb_info[tag];
2438 param = le32_to_cpu(psmpPayload->param);
2439 t = ccb->task;
2440 ts = &t->task_status;
2441 pm8001_dev = ccb->device;
2442 if (status)
2443 PM8001_FAIL_DBG(pm8001_ha,
2444 pm8001_printk("smp IO status 0x%x\n", status));
2445 if (unlikely(!t || !t->lldd_task || !t->dev))
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2446 return;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2447
2448 switch (status) {
2449 case IO_SUCCESS:
2450 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
2451 ts->resp = SAS_TASK_COMPLETE;
2452 ts->stat = SAM_GOOD;
2453 if (pm8001_dev)
2454 pm8001_dev->running_req--;
2455 break;
2456 case IO_ABORTED:
2457 PM8001_IO_DBG(pm8001_ha,
2458 pm8001_printk("IO_ABORTED IOMB\n"));
2459 ts->resp = SAS_TASK_COMPLETE;
2460 ts->stat = SAS_ABORTED_TASK;
2461 if (pm8001_dev)
2462 pm8001_dev->running_req--;
2463 break;
2464 case IO_OVERFLOW:
2465 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
2466 ts->resp = SAS_TASK_COMPLETE;
2467 ts->stat = SAS_DATA_OVERRUN;
2468 ts->residual = 0;
2469 if (pm8001_dev)
2470 pm8001_dev->running_req--;
2471 break;
2472 case IO_NO_DEVICE:
2473 PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
2474 ts->resp = SAS_TASK_COMPLETE;
2475 ts->stat = SAS_PHY_DOWN;
2476 break;
2477 case IO_ERROR_HW_TIMEOUT:
2478 PM8001_IO_DBG(pm8001_ha,
2479 pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
2480 ts->resp = SAS_TASK_COMPLETE;
2481 ts->stat = SAM_BUSY;
2482 break;
2483 case IO_XFER_ERROR_BREAK:
2484 PM8001_IO_DBG(pm8001_ha,
2485 pm8001_printk("IO_XFER_ERROR_BREAK\n"));
2486 ts->resp = SAS_TASK_COMPLETE;
2487 ts->stat = SAM_BUSY;
2488 break;
2489 case IO_XFER_ERROR_PHY_NOT_READY:
2490 PM8001_IO_DBG(pm8001_ha,
2491 pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
2492 ts->resp = SAS_TASK_COMPLETE;
2493 ts->stat = SAM_BUSY;
2494 break;
2495 case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
2496 PM8001_IO_DBG(pm8001_ha,
2497 pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
2498 ts->resp = SAS_TASK_COMPLETE;
2499 ts->stat = SAS_OPEN_REJECT;
2500 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2501 break;
2502 case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
2503 PM8001_IO_DBG(pm8001_ha,
2504 pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
2505 ts->resp = SAS_TASK_COMPLETE;
2506 ts->stat = SAS_OPEN_REJECT;
2507 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2508 break;
2509 case IO_OPEN_CNX_ERROR_BREAK:
2510 PM8001_IO_DBG(pm8001_ha,
2511 pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
2512 ts->resp = SAS_TASK_COMPLETE;
2513 ts->stat = SAS_OPEN_REJECT;
2514 ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
2515 break;
2516 case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
2517 PM8001_IO_DBG(pm8001_ha,
2518 pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
2519 ts->resp = SAS_TASK_COMPLETE;
2520 ts->stat = SAS_OPEN_REJECT;
2521 ts->open_rej_reason = SAS_OREJ_UNKNOWN;
2522 pm8001_handle_event(pm8001_ha,
2523 pm8001_dev,
2524 IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
2525 break;
2526 case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
2527 PM8001_IO_DBG(pm8001_ha,
2528 pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
2529 ts->resp = SAS_TASK_COMPLETE;
2530 ts->stat = SAS_OPEN_REJECT;
2531 ts->open_rej_reason = SAS_OREJ_BAD_DEST;
2532 break;
2533 case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
2534 PM8001_IO_DBG(pm8001_ha,
2535 pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
2536 "NOT_SUPPORTED\n"));
2537 ts->resp = SAS_TASK_COMPLETE;
2538 ts->stat = SAS_OPEN_REJECT;
2539 ts->open_rej_reason = SAS_OREJ_CONN_RATE;
2540 break;
2541 case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
2542 PM8001_IO_DBG(pm8001_ha,
2543 pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
2544 ts->resp = SAS_TASK_COMPLETE;
2545 ts->stat = SAS_OPEN_REJECT;
2546 ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
2547 break;
2548 case IO_XFER_ERROR_RX_FRAME:
2549 PM8001_IO_DBG(pm8001_ha,
2550 pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
2551 ts->resp = SAS_TASK_COMPLETE;
2552 ts->stat = SAS_DEV_NO_RESPONSE;
2553 break;
2554 case IO_XFER_OPEN_RETRY_TIMEOUT:
2555 PM8001_IO_DBG(pm8001_ha,
2556 pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
2557 ts->resp = SAS_TASK_COMPLETE;
2558 ts->stat = SAS_OPEN_REJECT;
2559 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2560 break;
2561 case IO_ERROR_INTERNAL_SMP_RESOURCE:
2562 PM8001_IO_DBG(pm8001_ha,
2563 pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
2564 ts->resp = SAS_TASK_COMPLETE;
2565 ts->stat = SAS_QUEUE_FULL;
2566 break;
2567 case IO_PORT_IN_RESET:
2568 PM8001_IO_DBG(pm8001_ha,
2569 pm8001_printk("IO_PORT_IN_RESET\n"));
2570 ts->resp = SAS_TASK_COMPLETE;
2571 ts->stat = SAS_OPEN_REJECT;
2572 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2573 break;
2574 case IO_DS_NON_OPERATIONAL:
2575 PM8001_IO_DBG(pm8001_ha,
2576 pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
2577 ts->resp = SAS_TASK_COMPLETE;
2578 ts->stat = SAS_DEV_NO_RESPONSE;
2579 break;
2580 case IO_DS_IN_RECOVERY:
2581 PM8001_IO_DBG(pm8001_ha,
2582 pm8001_printk("IO_DS_IN_RECOVERY\n"));
2583 ts->resp = SAS_TASK_COMPLETE;
2584 ts->stat = SAS_OPEN_REJECT;
2585 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2586 break;
2587 case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
2588 PM8001_IO_DBG(pm8001_ha,
2589 pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
2590 ts->resp = SAS_TASK_COMPLETE;
2591 ts->stat = SAS_OPEN_REJECT;
2592 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
2593 break;
2594 default:
2595 PM8001_IO_DBG(pm8001_ha,
2596 pm8001_printk("Unknown status 0x%x\n", status));
2597 ts->resp = SAS_TASK_COMPLETE;
2598 ts->stat = SAS_DEV_NO_RESPONSE;
2599 /* not allowed case. Therefore, return failed status */
2600 break;
2601 }
2602 spin_lock_irqsave(&t->task_state_lock, flags);
2603 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
2604 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
2605 t->task_state_flags |= SAS_TASK_STATE_DONE;
2606 if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
2607 spin_unlock_irqrestore(&t->task_state_lock, flags);
2608 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
2609 " io_status 0x%x resp 0x%x "
2610 "stat 0x%x but aborted by upper layer!\n",
2611 t, status, ts->resp, ts->stat));
2612 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2613 } else {
2614 spin_unlock_irqrestore(&t->task_state_lock, flags);
2615 pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
2616 mb();/* in order to force CPU ordering */
2617 t->task_done(t);
2618 }
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2619}
2620
2621static void
2622mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
2623{
2624 struct set_dev_state_resp *pPayload =
2625 (struct set_dev_state_resp *)(piomb + 4);
2626 u32 tag = le32_to_cpu(pPayload->tag);
2627 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
2628 struct pm8001_device *pm8001_dev = ccb->device;
2629 u32 status = le32_to_cpu(pPayload->status);
2630 u32 device_id = le32_to_cpu(pPayload->device_id);
2631 u8 pds = le32_to_cpu(pPayload->pds_nds) | PDS_BITS;
2632 u8 nds = le32_to_cpu(pPayload->pds_nds) | NDS_BITS;
2633 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
2634 "from 0x%x to 0x%x status = 0x%x!\n",
2635 device_id, pds, nds, status));
2636 complete(pm8001_dev->setds_completion);
2637 ccb->task = NULL;
2638 ccb->ccb_tag = 0xFFFFFFFF;
2639 pm8001_ccb_free(pm8001_ha, tag);
2640}
2641
2642static void
2643mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
2644{
2645 struct get_nvm_data_resp *pPayload =
2646 (struct get_nvm_data_resp *)(piomb + 4);
2647 u32 tag = le32_to_cpu(pPayload->tag);
2648 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
2649 u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
2650 complete(pm8001_ha->nvmd_completion);
2651 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
2652 if ((dlen_status & NVMD_STAT) != 0) {
2653 PM8001_FAIL_DBG(pm8001_ha,
2654 pm8001_printk("Set nvm data error!\n"));
2655 return;
2656 }
2657 ccb->task = NULL;
2658 ccb->ccb_tag = 0xFFFFFFFF;
2659 pm8001_ccb_free(pm8001_ha, tag);
2660}
2661
2662static void
2663mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
2664{
2665 struct fw_control_ex *fw_control_context;
2666 struct get_nvm_data_resp *pPayload =
2667 (struct get_nvm_data_resp *)(piomb + 4);
2668 u32 tag = le32_to_cpu(pPayload->tag);
2669 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
2670 u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
2671 u32 ir_tds_bn_dps_das_nvm =
2672 le32_to_cpu(pPayload->ir_tda_bn_dps_das_nvm);
2673 void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
2674 fw_control_context = ccb->fw_control_context;
2675
2676 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
2677 if ((dlen_status & NVMD_STAT) != 0) {
2678 PM8001_FAIL_DBG(pm8001_ha,
2679 pm8001_printk("Get nvm data error!\n"));
2680 complete(pm8001_ha->nvmd_completion);
2681 return;
2682 }
2683
2684 if (ir_tds_bn_dps_das_nvm & IPMode) {
2685 /* indirect mode - IR bit set */
2686 PM8001_MSG_DBG(pm8001_ha,
2687 pm8001_printk("Get NVMD success, IR=1\n"));
2688 if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
2689 if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
2690 memcpy(pm8001_ha->sas_addr,
2691 ((u8 *)virt_addr + 4),
2692 SAS_ADDR_SIZE);
2693 PM8001_MSG_DBG(pm8001_ha,
2694 pm8001_printk("Get SAS address"
2695 " from VPD successfully!\n"));
2696 }
2697 } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
2698 || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
2699 ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == EXPAN_ROM)) {
2700 ;
2701 } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == AAP1_RDUMP)
2702 || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == IOP_RDUMP)) {
2703 ;
2704 } else {
2705 /* Should not be happened*/
2706 PM8001_MSG_DBG(pm8001_ha,
2707 pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
2708 ir_tds_bn_dps_das_nvm));
2709 }
2710 } else /* direct mode */{
2711 PM8001_MSG_DBG(pm8001_ha,
2712 pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
2713 (dlen_status & NVMD_LEN) >> 24));
2714 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]2715 memcpy(fw_control_context->usrAddr,
2716 pm8001_ha->memoryMap.region[NVMD].virt_ptr,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2717 fw_control_context->len);
2718 complete(pm8001_ha->nvmd_completion);
2719 ccb->task = NULL;
2720 ccb->ccb_tag = 0xFFFFFFFF;
2721 pm8001_ccb_free(pm8001_ha, tag);
2722}
2723
2724static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
2725{
2726 struct local_phy_ctl_resp *pPayload =
2727 (struct local_phy_ctl_resp *)(piomb + 4);
2728 u32 status = le32_to_cpu(pPayload->status);
2729 u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
2730 u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
2731 if (status != 0) {
2732 PM8001_MSG_DBG(pm8001_ha,
2733 pm8001_printk("%x phy execute %x phy op failed! \n",
2734 phy_id, phy_op));
2735 } else
2736 PM8001_MSG_DBG(pm8001_ha,
2737 pm8001_printk("%x phy execute %x phy op success! \n",
2738 phy_id, phy_op));
2739 return 0;
2740}
2741
2742/**
2743 * pm8001_bytes_dmaed - one of the interface function communication with libsas
2744 * @pm8001_ha: our hba card information
2745 * @i: which phy that received the event.
2746 *
2747 * when HBA driver received the identify done event or initiate FIS received
2748 * event(for SATA), it will invoke this function to notify the sas layer that
2749 * the sas toplogy has formed, please discover the the whole sas domain,
2750 * while receive a broadcast(change) primitive just tell the sas
2751 * layer to discover the changed domain rather than the whole domain.
2752 */
2753static void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
2754{
2755 struct pm8001_phy *phy = &pm8001_ha->phy[i];
2756 struct asd_sas_phy *sas_phy = &phy->sas_phy;
2757 struct sas_ha_struct *sas_ha;
2758 if (!phy->phy_attached)
2759 return;
2760
2761 sas_ha = pm8001_ha->sas;
2762 if (sas_phy->phy) {
2763 struct sas_phy *sphy = sas_phy->phy;
2764 sphy->negotiated_linkrate = sas_phy->linkrate;
2765 sphy->minimum_linkrate = phy->minimum_linkrate;
2766 sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
2767 sphy->maximum_linkrate = phy->maximum_linkrate;
2768 sphy->maximum_linkrate_hw = phy->maximum_linkrate;
2769 }
2770
2771 if (phy->phy_type & PORT_TYPE_SAS) {
2772 struct sas_identify_frame *id;
2773 id = (struct sas_identify_frame *)phy->frame_rcvd;
2774 id->dev_type = phy->identify.device_type;
2775 id->initiator_bits = SAS_PROTOCOL_ALL;
2776 id->target_bits = phy->identify.target_port_protocols;
2777 } else if (phy->phy_type & PORT_TYPE_SATA) {
2778 /*Nothing*/
2779 }
2780 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
2781
2782 sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
2783 pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
2784}
2785
2786/* Get the link rate speed */
2787static void get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
2788{
2789 struct sas_phy *sas_phy = phy->sas_phy.phy;
2790
2791 switch (link_rate) {
2792 case PHY_SPEED_60:
2793 phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
2794 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
2795 break;
2796 case PHY_SPEED_30:
2797 phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
2798 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
2799 break;
2800 case PHY_SPEED_15:
2801 phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
2802 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
2803 break;
2804 }
2805 sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
2806 sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
2807 sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
2808 sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
2809 sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
2810}
2811
2812/**
2813 * asd_get_attached_sas_addr -- extract/generate attached SAS address
2814 * @phy: pointer to asd_phy
2815 * @sas_addr: pointer to buffer where the SAS address is to be written
2816 *
2817 * This function extracts the SAS address from an IDENTIFY frame
2818 * received. If OOB is SATA, then a SAS address is generated from the
2819 * HA tables.
2820 *
2821 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
2822 * buffer.
2823 */
2824static void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
2825 u8 *sas_addr)
2826{
2827 if (phy->sas_phy.frame_rcvd[0] == 0x34
2828 && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
2829 struct pm8001_hba_info *pm8001_ha = phy->sas_phy.ha->lldd_ha;
2830 /* FIS device-to-host */
2831 u64 addr = be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr);
2832 addr += phy->sas_phy.id;
2833 *(__be64 *)sas_addr = cpu_to_be64(addr);
2834 } else {
2835 struct sas_identify_frame *idframe =
2836 (void *) phy->sas_phy.frame_rcvd;
2837 memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
2838 }
2839}
2840
2841/**
2842 * pm8001_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
2843 * @pm8001_ha: our hba card information
2844 * @Qnum: the outbound queue message number.
2845 * @SEA: source of event to ack
2846 * @port_id: port id.
2847 * @phyId: phy id.
2848 * @param0: parameter 0.
2849 * @param1: parameter 1.
2850 */
2851static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
2852 u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
2853{
2854 struct hw_event_ack_req payload;
2855 u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
2856
2857 struct inbound_queue_table *circularQ;
2858
2859 memset((u8 *)&payload, 0, sizeof(payload));
2860 circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
2861 payload.tag = 1;
2862 payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
2863 ((phyId & 0x0F) << 4) | (port_id & 0x0F));
2864 payload.param0 = cpu_to_le32(param0);
2865 payload.param1 = cpu_to_le32(param1);
2866 mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
2867}
2868
2869static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
2870 u32 phyId, u32 phy_op);
2871
2872/**
2873 * hw_event_sas_phy_up -FW tells me a SAS phy up event.
2874 * @pm8001_ha: our hba card information
2875 * @piomb: IO message buffer
2876 */
2877static void
2878hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
2879{
2880 struct hw_event_resp *pPayload =
2881 (struct hw_event_resp *)(piomb + 4);
2882 u32 lr_evt_status_phyid_portid =
2883 le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
2884 u8 link_rate =
2885 (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2886 u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2887 u8 phy_id =
2888 (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2889 u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
2890 u8 portstate = (u8)(npip_portstate & 0x0000000F);
2891 struct pm8001_port *port = &pm8001_ha->port[port_id];
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2892 struct sas_ha_struct *sas_ha = pm8001_ha->sas;
2893 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
2894 unsigned long flags;
2895 u8 deviceType = pPayload->sas_identify.dev_type;
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2896 port->port_state = portstate;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2897 PM8001_MSG_DBG(pm8001_ha,
2898 pm8001_printk("HW_EVENT_SAS_PHY_UP \n"));
2899
2900 switch (deviceType) {
2901 case SAS_PHY_UNUSED:
2902 PM8001_MSG_DBG(pm8001_ha,
2903 pm8001_printk("device type no device.\n"));
2904 break;
2905 case SAS_END_DEVICE:
2906 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
2907 pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
2908 PHY_NOTIFY_ENABLE_SPINUP);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2909 port->port_attached = 1;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2910 get_lrate_mode(phy, link_rate);
2911 break;
2912 case SAS_EDGE_EXPANDER_DEVICE:
2913 PM8001_MSG_DBG(pm8001_ha,
2914 pm8001_printk("expander device.\n"));
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2915 port->port_attached = 1;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2916 get_lrate_mode(phy, link_rate);
2917 break;
2918 case SAS_FANOUT_EXPANDER_DEVICE:
2919 PM8001_MSG_DBG(pm8001_ha,
2920 pm8001_printk("fanout expander device.\n"));
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2921 port->port_attached = 1;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2922 get_lrate_mode(phy, link_rate);
2923 break;
2924 default:
2925 PM8001_MSG_DBG(pm8001_ha,
2926 pm8001_printk("unkown device type(%x)\n", deviceType));
2927 break;
2928 }
2929 phy->phy_type |= PORT_TYPE_SAS;
2930 phy->identify.device_type = deviceType;
2931 phy->phy_attached = 1;
2932 if (phy->identify.device_type == SAS_END_DEV)
2933 phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
2934 else if (phy->identify.device_type != NO_DEVICE)
2935 phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
2936 phy->sas_phy.oob_mode = SAS_OOB_MODE;
2937 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
2938 spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
2939 memcpy(phy->frame_rcvd, &pPayload->sas_identify,
2940 sizeof(struct sas_identify_frame)-4);
2941 phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
2942 pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
2943 spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
2944 if (pm8001_ha->flags == PM8001F_RUN_TIME)
2945 mdelay(200);/*delay a moment to wait disk to spinup*/
2946 pm8001_bytes_dmaed(pm8001_ha, phy_id);
2947}
2948
2949/**
2950 * hw_event_sata_phy_up -FW tells me a SATA phy up event.
2951 * @pm8001_ha: our hba card information
2952 * @piomb: IO message buffer
2953 */
2954static void
2955hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
2956{
2957 struct hw_event_resp *pPayload =
2958 (struct hw_event_resp *)(piomb + 4);
2959 u32 lr_evt_status_phyid_portid =
2960 le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
2961 u8 link_rate =
2962 (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2963 u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2964 u8 phy_id =
2965 (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2966 u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
2967 u8 portstate = (u8)(npip_portstate & 0x0000000F);
2968 struct pm8001_port *port = &pm8001_ha->port[port_id];
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2969 struct sas_ha_struct *sas_ha = pm8001_ha->sas;
2970 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
2971 unsigned long flags;
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]2972 port->port_state = portstate;
2973 port->port_attached = 1;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]2974 get_lrate_mode(phy, link_rate);
2975 phy->phy_type |= PORT_TYPE_SATA;
2976 phy->phy_attached = 1;
2977 phy->sas_phy.oob_mode = SATA_OOB_MODE;
2978 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
2979 spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
2980 memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
2981 sizeof(struct dev_to_host_fis));
2982 phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
2983 phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
2984 phy->identify.device_type = SATA_DEV;
2985 pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
2986 spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
2987 pm8001_bytes_dmaed(pm8001_ha, phy_id);
2988}
2989
2990/**
2991 * hw_event_phy_down -we should notify the libsas the phy is down.
2992 * @pm8001_ha: our hba card information
2993 * @piomb: IO message buffer
2994 */
2995static void
2996hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
2997{
2998 struct hw_event_resp *pPayload =
2999 (struct hw_event_resp *)(piomb + 4);
3000 u32 lr_evt_status_phyid_portid =
3001 le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
3002 u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
3003 u8 phy_id =
3004 (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
3005 u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
3006 u8 portstate = (u8)(npip_portstate & 0x0000000F);
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3007 struct pm8001_port *port = &pm8001_ha->port[port_id];
3008 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
3009 port->port_state = portstate;
3010 phy->phy_type = 0;
3011 phy->identify.device_type = 0;
3012 phy->phy_attached = 0;
3013 memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3014 switch (portstate) {
3015 case PORT_VALID:
3016 break;
3017 case PORT_INVALID:
3018 PM8001_MSG_DBG(pm8001_ha,
3019 pm8001_printk(" PortInvalid portID %d \n", port_id));
3020 PM8001_MSG_DBG(pm8001_ha,
3021 pm8001_printk(" Last phy Down and port invalid\n"));
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3022 port->port_attached = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3023 pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
3024 port_id, phy_id, 0, 0);
3025 break;
3026 case PORT_IN_RESET:
3027 PM8001_MSG_DBG(pm8001_ha,
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3028 pm8001_printk(" Port In Reset portID %d \n", port_id));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3029 break;
3030 case PORT_NOT_ESTABLISHED:
3031 PM8001_MSG_DBG(pm8001_ha,
3032 pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3033 port->port_attached = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3034 break;
3035 case PORT_LOSTCOMM:
3036 PM8001_MSG_DBG(pm8001_ha,
3037 pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
3038 PM8001_MSG_DBG(pm8001_ha,
3039 pm8001_printk(" Last phy Down and port invalid\n"));
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3040 port->port_attached = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3041 pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
3042 port_id, phy_id, 0, 0);
3043 break;
3044 default:
jack wang1cc943a2009-12-07 17:22:42 +0800[diff] [blame]3045 port->port_attached = 0;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3046 PM8001_MSG_DBG(pm8001_ha,
3047 pm8001_printk(" phy Down and(default) = %x\n",
3048 portstate));
3049 break;
3050
3051 }
3052}
3053
3054/**
3055 * mpi_reg_resp -process register device ID response.
3056 * @pm8001_ha: our hba card information
3057 * @piomb: IO message buffer
3058 *
3059 * when sas layer find a device it will notify LLDD, then the driver register
3060 * the domain device to FW, this event is the return device ID which the FW
3061 * has assigned, from now,inter-communication with FW is no longer using the
3062 * SAS address, use device ID which FW assigned.
3063 */
3064static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
3065{
3066 u32 status;
3067 u32 device_id;
3068 u32 htag;
3069 struct pm8001_ccb_info *ccb;
3070 struct pm8001_device *pm8001_dev;
3071 struct dev_reg_resp *registerRespPayload =
3072 (struct dev_reg_resp *)(piomb + 4);
3073
3074 htag = le32_to_cpu(registerRespPayload->tag);
3075 ccb = &pm8001_ha->ccb_info[registerRespPayload->tag];
3076 pm8001_dev = ccb->device;
3077 status = le32_to_cpu(registerRespPayload->status);
3078 device_id = le32_to_cpu(registerRespPayload->device_id);
3079 PM8001_MSG_DBG(pm8001_ha,
3080 pm8001_printk(" register device is status = %d\n", status));
3081 switch (status) {
3082 case DEVREG_SUCCESS:
3083 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
3084 pm8001_dev->device_id = device_id;
3085 break;
3086 case DEVREG_FAILURE_OUT_OF_RESOURCE:
3087 PM8001_MSG_DBG(pm8001_ha,
3088 pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
3089 break;
3090 case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
3091 PM8001_MSG_DBG(pm8001_ha,
3092 pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
3093 break;
3094 case DEVREG_FAILURE_INVALID_PHY_ID:
3095 PM8001_MSG_DBG(pm8001_ha,
3096 pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
3097 break;
3098 case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
3099 PM8001_MSG_DBG(pm8001_ha,
3100 pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
3101 break;
3102 case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
3103 PM8001_MSG_DBG(pm8001_ha,
3104 pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
3105 break;
3106 case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
3107 PM8001_MSG_DBG(pm8001_ha,
3108 pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
3109 break;
3110 case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
3111 PM8001_MSG_DBG(pm8001_ha,
3112 pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
3113 break;
3114 default:
3115 PM8001_MSG_DBG(pm8001_ha,
3116 pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_UNSORPORTED\n"));
3117 break;
3118 }
3119 complete(pm8001_dev->dcompletion);
3120 ccb->task = NULL;
3121 ccb->ccb_tag = 0xFFFFFFFF;
3122 pm8001_ccb_free(pm8001_ha, htag);
3123 return 0;
3124}
3125
3126static int mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
3127{
3128 u32 status;
3129 u32 device_id;
3130 struct dev_reg_resp *registerRespPayload =
3131 (struct dev_reg_resp *)(piomb + 4);
3132
3133 status = le32_to_cpu(registerRespPayload->status);
3134 device_id = le32_to_cpu(registerRespPayload->device_id);
3135 if (status != 0)
3136 PM8001_MSG_DBG(pm8001_ha,
3137 pm8001_printk(" deregister device failed ,status = %x"
3138 ", device_id = %x\n", status, device_id));
3139 return 0;
3140}
3141
3142static int
3143mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
3144{
3145 u32 status;
3146 struct fw_control_ex fw_control_context;
3147 struct fw_flash_Update_resp *ppayload =
3148 (struct fw_flash_Update_resp *)(piomb + 4);
3149 u32 tag = le32_to_cpu(ppayload->tag);
3150 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
3151 status = le32_to_cpu(ppayload->status);
3152 memcpy(&fw_control_context,
3153 ccb->fw_control_context,
3154 sizeof(fw_control_context));
3155 switch (status) {
3156 case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
3157 PM8001_MSG_DBG(pm8001_ha,
3158 pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
3159 break;
3160 case FLASH_UPDATE_IN_PROGRESS:
3161 PM8001_MSG_DBG(pm8001_ha,
3162 pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
3163 break;
3164 case FLASH_UPDATE_HDR_ERR:
3165 PM8001_MSG_DBG(pm8001_ha,
3166 pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
3167 break;
3168 case FLASH_UPDATE_OFFSET_ERR:
3169 PM8001_MSG_DBG(pm8001_ha,
3170 pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
3171 break;
3172 case FLASH_UPDATE_CRC_ERR:
3173 PM8001_MSG_DBG(pm8001_ha,
3174 pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
3175 break;
3176 case FLASH_UPDATE_LENGTH_ERR:
3177 PM8001_MSG_DBG(pm8001_ha,
3178 pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
3179 break;
3180 case FLASH_UPDATE_HW_ERR:
3181 PM8001_MSG_DBG(pm8001_ha,
3182 pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
3183 break;
3184 case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
3185 PM8001_MSG_DBG(pm8001_ha,
3186 pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
3187 break;
3188 case FLASH_UPDATE_DISABLED:
3189 PM8001_MSG_DBG(pm8001_ha,
3190 pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
3191 break;
3192 default:
3193 PM8001_MSG_DBG(pm8001_ha,
3194 pm8001_printk("No matched status = %d\n", status));
3195 break;
3196 }
3197 ccb->fw_control_context->fw_control->retcode = status;
3198 pci_free_consistent(pm8001_ha->pdev,
3199 fw_control_context.len,
3200 fw_control_context.virtAddr,
3201 fw_control_context.phys_addr);
3202 complete(pm8001_ha->nvmd_completion);
3203 ccb->task = NULL;
3204 ccb->ccb_tag = 0xFFFFFFFF;
3205 pm8001_ccb_free(pm8001_ha, tag);
3206 return 0;
3207}
3208
3209static int
3210mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
3211{
3212 u32 status;
3213 int i;
3214 struct general_event_resp *pPayload =
3215 (struct general_event_resp *)(piomb + 4);
3216 status = le32_to_cpu(pPayload->status);
3217 PM8001_MSG_DBG(pm8001_ha,
3218 pm8001_printk(" status = 0x%x\n", status));
3219 for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
3220 PM8001_MSG_DBG(pm8001_ha,
3221 pm8001_printk("inb_IOMB_payload[0x%x] 0x%x, \n", i,
3222 pPayload->inb_IOMB_payload[i]));
3223 return 0;
3224}
3225
3226static int
3227mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
3228{
3229 struct sas_task *t;
3230 struct pm8001_ccb_info *ccb;
3231 unsigned long flags;
3232 u32 status ;
3233 u32 tag, scp;
3234 struct task_status_struct *ts;
3235
3236 struct task_abort_resp *pPayload =
3237 (struct task_abort_resp *)(piomb + 4);
3238 ccb = &pm8001_ha->ccb_info[pPayload->tag];
3239 t = ccb->task;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3240
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3241
3242 status = le32_to_cpu(pPayload->status);
3243 tag = le32_to_cpu(pPayload->tag);
3244 scp = le32_to_cpu(pPayload->scp);
3245 PM8001_IO_DBG(pm8001_ha,
3246 pm8001_printk(" status = 0x%x\n", status));
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3247 if (t == NULL)
3248 return -1;
3249 ts = &t->task_status;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3250 if (status != 0)
3251 PM8001_FAIL_DBG(pm8001_ha,
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3252 pm8001_printk("task abort failed status 0x%x ,"
3253 "tag = 0x%x, scp= 0x%x\n", status, tag, scp));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3254 switch (status) {
3255 case IO_SUCCESS:
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3256 PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3257 ts->resp = SAS_TASK_COMPLETE;
3258 ts->stat = SAM_GOOD;
3259 break;
3260 case IO_NOT_VALID:
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3261 PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3262 ts->resp = TMF_RESP_FUNC_FAILED;
3263 break;
3264 }
3265 spin_lock_irqsave(&t->task_state_lock, flags);
3266 t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
3267 t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
3268 t->task_state_flags |= SAS_TASK_STATE_DONE;
3269 spin_unlock_irqrestore(&t->task_state_lock, flags);
3270 pm8001_ccb_task_free(pm8001_ha, t, ccb, pPayload->tag);
3271 mb();
3272 t->task_done(t);
3273 return 0;
3274}
3275
3276/**
3277 * mpi_hw_event -The hw event has come.
3278 * @pm8001_ha: our hba card information
3279 * @piomb: IO message buffer
3280 */
3281static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
3282{
3283 unsigned long flags;
3284 struct hw_event_resp *pPayload =
3285 (struct hw_event_resp *)(piomb + 4);
3286 u32 lr_evt_status_phyid_portid =
3287 le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
3288 u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
3289 u8 phy_id =
3290 (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
3291 u16 eventType =
3292 (u16)((lr_evt_status_phyid_portid & 0x00FFFF00) >> 8);
3293 u8 status =
3294 (u8)((lr_evt_status_phyid_portid & 0x0F000000) >> 24);
3295 struct sas_ha_struct *sas_ha = pm8001_ha->sas;
3296 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
3297 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
3298 PM8001_MSG_DBG(pm8001_ha,
3299 pm8001_printk("outbound queue HW event & event type : "));
3300 switch (eventType) {
3301 case HW_EVENT_PHY_START_STATUS:
3302 PM8001_MSG_DBG(pm8001_ha,
3303 pm8001_printk("HW_EVENT_PHY_START_STATUS"
3304 " status = %x\n", status));
3305 if (status == 0) {
3306 phy->phy_state = 1;
3307 if (pm8001_ha->flags == PM8001F_RUN_TIME)
3308 complete(phy->enable_completion);
3309 }
3310 break;
3311 case HW_EVENT_SAS_PHY_UP:
3312 PM8001_MSG_DBG(pm8001_ha,
3313 pm8001_printk("HW_EVENT_PHY_START_STATUS \n"));
3314 hw_event_sas_phy_up(pm8001_ha, piomb);
3315 break;
3316 case HW_EVENT_SATA_PHY_UP:
3317 PM8001_MSG_DBG(pm8001_ha,
3318 pm8001_printk("HW_EVENT_SATA_PHY_UP \n"));
3319 hw_event_sata_phy_up(pm8001_ha, piomb);
3320 break;
3321 case HW_EVENT_PHY_STOP_STATUS:
3322 PM8001_MSG_DBG(pm8001_ha,
3323 pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
3324 "status = %x\n", status));
3325 if (status == 0)
3326 phy->phy_state = 0;
3327 break;
3328 case HW_EVENT_SATA_SPINUP_HOLD:
3329 PM8001_MSG_DBG(pm8001_ha,
3330 pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD \n"));
3331 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
3332 break;
3333 case HW_EVENT_PHY_DOWN:
3334 PM8001_MSG_DBG(pm8001_ha,
3335 pm8001_printk("HW_EVENT_PHY_DOWN \n"));
3336 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
3337 phy->phy_attached = 0;
3338 phy->phy_state = 0;
3339 hw_event_phy_down(pm8001_ha, piomb);
3340 break;
3341 case HW_EVENT_PORT_INVALID:
3342 PM8001_MSG_DBG(pm8001_ha,
3343 pm8001_printk("HW_EVENT_PORT_INVALID\n"));
3344 sas_phy_disconnected(sas_phy);
3345 phy->phy_attached = 0;
3346 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3347 break;
3348 /* the broadcast change primitive received, tell the LIBSAS this event
3349 to revalidate the sas domain*/
3350 case HW_EVENT_BROADCAST_CHANGE:
3351 PM8001_MSG_DBG(pm8001_ha,
3352 pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
3353 pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
3354 port_id, phy_id, 1, 0);
3355 spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
3356 sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
3357 spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
3358 sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
3359 break;
3360 case HW_EVENT_PHY_ERROR:
3361 PM8001_MSG_DBG(pm8001_ha,
3362 pm8001_printk("HW_EVENT_PHY_ERROR\n"));
3363 sas_phy_disconnected(&phy->sas_phy);
3364 phy->phy_attached = 0;
3365 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
3366 break;
3367 case HW_EVENT_BROADCAST_EXP:
3368 PM8001_MSG_DBG(pm8001_ha,
3369 pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
3370 spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
3371 sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
3372 spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
3373 sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
3374 break;
3375 case HW_EVENT_LINK_ERR_INVALID_DWORD:
3376 PM8001_MSG_DBG(pm8001_ha,
3377 pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
3378 pm8001_hw_event_ack_req(pm8001_ha, 0,
3379 HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
3380 sas_phy_disconnected(sas_phy);
3381 phy->phy_attached = 0;
3382 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3383 break;
3384 case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
3385 PM8001_MSG_DBG(pm8001_ha,
3386 pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
3387 pm8001_hw_event_ack_req(pm8001_ha, 0,
3388 HW_EVENT_LINK_ERR_DISPARITY_ERROR,
3389 port_id, phy_id, 0, 0);
3390 sas_phy_disconnected(sas_phy);
3391 phy->phy_attached = 0;
3392 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3393 break;
3394 case HW_EVENT_LINK_ERR_CODE_VIOLATION:
3395 PM8001_MSG_DBG(pm8001_ha,
3396 pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
3397 pm8001_hw_event_ack_req(pm8001_ha, 0,
3398 HW_EVENT_LINK_ERR_CODE_VIOLATION,
3399 port_id, phy_id, 0, 0);
3400 sas_phy_disconnected(sas_phy);
3401 phy->phy_attached = 0;
3402 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3403 break;
3404 case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
3405 PM8001_MSG_DBG(pm8001_ha,
3406 pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
3407 pm8001_hw_event_ack_req(pm8001_ha, 0,
3408 HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
3409 port_id, phy_id, 0, 0);
3410 sas_phy_disconnected(sas_phy);
3411 phy->phy_attached = 0;
3412 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3413 break;
3414 case HW_EVENT_MALFUNCTION:
3415 PM8001_MSG_DBG(pm8001_ha,
3416 pm8001_printk("HW_EVENT_MALFUNCTION\n"));
3417 break;
3418 case HW_EVENT_BROADCAST_SES:
3419 PM8001_MSG_DBG(pm8001_ha,
3420 pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
3421 spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
3422 sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
3423 spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
3424 sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
3425 break;
3426 case HW_EVENT_INBOUND_CRC_ERROR:
3427 PM8001_MSG_DBG(pm8001_ha,
3428 pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
3429 pm8001_hw_event_ack_req(pm8001_ha, 0,
3430 HW_EVENT_INBOUND_CRC_ERROR,
3431 port_id, phy_id, 0, 0);
3432 break;
3433 case HW_EVENT_HARD_RESET_RECEIVED:
3434 PM8001_MSG_DBG(pm8001_ha,
3435 pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
3436 sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
3437 break;
3438 case HW_EVENT_ID_FRAME_TIMEOUT:
3439 PM8001_MSG_DBG(pm8001_ha,
3440 pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
3441 sas_phy_disconnected(sas_phy);
3442 phy->phy_attached = 0;
3443 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3444 break;
3445 case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
3446 PM8001_MSG_DBG(pm8001_ha,
3447 pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED \n"));
3448 pm8001_hw_event_ack_req(pm8001_ha, 0,
3449 HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
3450 port_id, phy_id, 0, 0);
3451 sas_phy_disconnected(sas_phy);
3452 phy->phy_attached = 0;
3453 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3454 break;
3455 case HW_EVENT_PORT_RESET_TIMER_TMO:
3456 PM8001_MSG_DBG(pm8001_ha,
3457 pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO \n"));
3458 sas_phy_disconnected(sas_phy);
3459 phy->phy_attached = 0;
3460 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3461 break;
3462 case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
3463 PM8001_MSG_DBG(pm8001_ha,
3464 pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO \n"));
3465 sas_phy_disconnected(sas_phy);
3466 phy->phy_attached = 0;
3467 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
3468 break;
3469 case HW_EVENT_PORT_RECOVER:
3470 PM8001_MSG_DBG(pm8001_ha,
3471 pm8001_printk("HW_EVENT_PORT_RECOVER \n"));
3472 break;
3473 case HW_EVENT_PORT_RESET_COMPLETE:
3474 PM8001_MSG_DBG(pm8001_ha,
3475 pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE \n"));
3476 break;
3477 case EVENT_BROADCAST_ASYNCH_EVENT:
3478 PM8001_MSG_DBG(pm8001_ha,
3479 pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
3480 break;
3481 default:
3482 PM8001_MSG_DBG(pm8001_ha,
3483 pm8001_printk("Unknown event type = %x\n", eventType));
3484 break;
3485 }
3486 return 0;
3487}
3488
3489/**
3490 * process_one_iomb - process one outbound Queue memory block
3491 * @pm8001_ha: our hba card information
3492 * @piomb: IO message buffer
3493 */
3494static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
3495{
3496 u32 pHeader = (u32)*(u32 *)piomb;
3497 u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
3498
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3499 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3500
3501 switch (opc) {
3502 case OPC_OUB_ECHO:
3503 PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO \n"));
3504 break;
3505 case OPC_OUB_HW_EVENT:
3506 PM8001_MSG_DBG(pm8001_ha,
3507 pm8001_printk("OPC_OUB_HW_EVENT \n"));
3508 mpi_hw_event(pm8001_ha, piomb);
3509 break;
3510 case OPC_OUB_SSP_COMP:
3511 PM8001_MSG_DBG(pm8001_ha,
3512 pm8001_printk("OPC_OUB_SSP_COMP \n"));
3513 mpi_ssp_completion(pm8001_ha, piomb);
3514 break;
3515 case OPC_OUB_SMP_COMP:
3516 PM8001_MSG_DBG(pm8001_ha,
3517 pm8001_printk("OPC_OUB_SMP_COMP \n"));
3518 mpi_smp_completion(pm8001_ha, piomb);
3519 break;
3520 case OPC_OUB_LOCAL_PHY_CNTRL:
3521 PM8001_MSG_DBG(pm8001_ha,
3522 pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
3523 mpi_local_phy_ctl(pm8001_ha, piomb);
3524 break;
3525 case OPC_OUB_DEV_REGIST:
3526 PM8001_MSG_DBG(pm8001_ha,
3527 pm8001_printk("OPC_OUB_DEV_REGIST \n"));
3528 mpi_reg_resp(pm8001_ha, piomb);
3529 break;
3530 case OPC_OUB_DEREG_DEV:
3531 PM8001_MSG_DBG(pm8001_ha,
3532 pm8001_printk("unresgister the deviece \n"));
3533 mpi_dereg_resp(pm8001_ha, piomb);
3534 break;
3535 case OPC_OUB_GET_DEV_HANDLE:
3536 PM8001_MSG_DBG(pm8001_ha,
3537 pm8001_printk("OPC_OUB_GET_DEV_HANDLE \n"));
3538 break;
3539 case OPC_OUB_SATA_COMP:
3540 PM8001_MSG_DBG(pm8001_ha,
3541 pm8001_printk("OPC_OUB_SATA_COMP \n"));
3542 mpi_sata_completion(pm8001_ha, piomb);
3543 break;
3544 case OPC_OUB_SATA_EVENT:
3545 PM8001_MSG_DBG(pm8001_ha,
3546 pm8001_printk("OPC_OUB_SATA_EVENT \n"));
3547 mpi_sata_event(pm8001_ha, piomb);
3548 break;
3549 case OPC_OUB_SSP_EVENT:
3550 PM8001_MSG_DBG(pm8001_ha,
3551 pm8001_printk("OPC_OUB_SSP_EVENT\n"));
3552 mpi_ssp_event(pm8001_ha, piomb);
3553 break;
3554 case OPC_OUB_DEV_HANDLE_ARRIV:
3555 PM8001_MSG_DBG(pm8001_ha,
3556 pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
3557 /*This is for target*/
3558 break;
3559 case OPC_OUB_SSP_RECV_EVENT:
3560 PM8001_MSG_DBG(pm8001_ha,
3561 pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
3562 /*This is for target*/
3563 break;
3564 case OPC_OUB_DEV_INFO:
3565 PM8001_MSG_DBG(pm8001_ha,
3566 pm8001_printk("OPC_OUB_DEV_INFO\n"));
3567 break;
3568 case OPC_OUB_FW_FLASH_UPDATE:
3569 PM8001_MSG_DBG(pm8001_ha,
3570 pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
3571 mpi_fw_flash_update_resp(pm8001_ha, piomb);
3572 break;
3573 case OPC_OUB_GPIO_RESPONSE:
3574 PM8001_MSG_DBG(pm8001_ha,
3575 pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
3576 break;
3577 case OPC_OUB_GPIO_EVENT:
3578 PM8001_MSG_DBG(pm8001_ha,
3579 pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
3580 break;
3581 case OPC_OUB_GENERAL_EVENT:
3582 PM8001_MSG_DBG(pm8001_ha,
3583 pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
3584 mpi_general_event(pm8001_ha, piomb);
3585 break;
3586 case OPC_OUB_SSP_ABORT_RSP:
3587 PM8001_MSG_DBG(pm8001_ha,
3588 pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
3589 mpi_task_abort_resp(pm8001_ha, piomb);
3590 break;
3591 case OPC_OUB_SATA_ABORT_RSP:
3592 PM8001_MSG_DBG(pm8001_ha,
3593 pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
3594 mpi_task_abort_resp(pm8001_ha, piomb);
3595 break;
3596 case OPC_OUB_SAS_DIAG_MODE_START_END:
3597 PM8001_MSG_DBG(pm8001_ha,
3598 pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
3599 break;
3600 case OPC_OUB_SAS_DIAG_EXECUTE:
3601 PM8001_MSG_DBG(pm8001_ha,
3602 pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
3603 break;
3604 case OPC_OUB_GET_TIME_STAMP:
3605 PM8001_MSG_DBG(pm8001_ha,
3606 pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
3607 break;
3608 case OPC_OUB_SAS_HW_EVENT_ACK:
3609 PM8001_MSG_DBG(pm8001_ha,
3610 pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
3611 break;
3612 case OPC_OUB_PORT_CONTROL:
3613 PM8001_MSG_DBG(pm8001_ha,
3614 pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
3615 break;
3616 case OPC_OUB_SMP_ABORT_RSP:
3617 PM8001_MSG_DBG(pm8001_ha,
3618 pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
3619 mpi_task_abort_resp(pm8001_ha, piomb);
3620 break;
3621 case OPC_OUB_GET_NVMD_DATA:
3622 PM8001_MSG_DBG(pm8001_ha,
3623 pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
3624 mpi_get_nvmd_resp(pm8001_ha, piomb);
3625 break;
3626 case OPC_OUB_SET_NVMD_DATA:
3627 PM8001_MSG_DBG(pm8001_ha,
3628 pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
3629 mpi_set_nvmd_resp(pm8001_ha, piomb);
3630 break;
3631 case OPC_OUB_DEVICE_HANDLE_REMOVAL:
3632 PM8001_MSG_DBG(pm8001_ha,
3633 pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
3634 break;
3635 case OPC_OUB_SET_DEVICE_STATE:
3636 PM8001_MSG_DBG(pm8001_ha,
3637 pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
3638 mpi_set_dev_state_resp(pm8001_ha, piomb);
3639 break;
3640 case OPC_OUB_GET_DEVICE_STATE:
3641 PM8001_MSG_DBG(pm8001_ha,
3642 pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
3643 break;
3644 case OPC_OUB_SET_DEV_INFO:
3645 PM8001_MSG_DBG(pm8001_ha,
3646 pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
3647 break;
3648 case OPC_OUB_SAS_RE_INITIALIZE:
3649 PM8001_MSG_DBG(pm8001_ha,
3650 pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
3651 break;
3652 default:
3653 PM8001_MSG_DBG(pm8001_ha,
3654 pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
3655 opc));
3656 break;
3657 }
3658}
3659
3660static int process_oq(struct pm8001_hba_info *pm8001_ha)
3661{
3662 struct outbound_queue_table *circularQ;
3663 void *pMsg1 = NULL;
3664 u8 bc = 0;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3665 u32 ret = MPI_IO_STATUS_FAIL;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3666
3667 circularQ = &pm8001_ha->outbnd_q_tbl[0];
3668 do {
3669 ret = mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
3670 if (MPI_IO_STATUS_SUCCESS == ret) {
3671 /* process the outbound message */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3672 process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3673 /* free the message from the outbound circular buffer */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3674 mpi_msg_free_set(pm8001_ha, pMsg1, circularQ, bc);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3675 }
3676 if (MPI_IO_STATUS_BUSY == ret) {
3677 u32 producer_idx;
3678 /* Update the producer index from SPC */
3679 producer_idx = pm8001_read_32(circularQ->pi_virt);
3680 circularQ->producer_index = cpu_to_le32(producer_idx);
3681 if (circularQ->producer_index ==
3682 circularQ->consumer_idx)
3683 /* OQ is empty */
3684 break;
3685 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3686 } while (1);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3687 return ret;
3688}
3689
3690/* PCI_DMA_... to our direction translation. */
3691static const u8 data_dir_flags[] = {
3692 [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
3693 [PCI_DMA_TODEVICE] = DATA_DIR_OUT,/* OUTBOUND */
3694 [PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */
3695 [PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */
3696};
3697static void
3698pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
3699{
3700 int i;
3701 struct scatterlist *sg;
3702 struct pm8001_prd *buf_prd = prd;
3703
3704 for_each_sg(scatter, sg, nr, i) {
3705 buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
3706 buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
3707 buf_prd->im_len.e = 0;
3708 buf_prd++;
3709 }
3710}
3711
3712static void build_smp_cmd(u32 deviceID, u32 hTag, struct smp_req *psmp_cmd)
3713{
3714 psmp_cmd->tag = cpu_to_le32(hTag);
3715 psmp_cmd->device_id = cpu_to_le32(deviceID);
3716 psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
3717}
3718
3719/**
3720 * pm8001_chip_smp_req - send a SMP task to FW
3721 * @pm8001_ha: our hba card information.
3722 * @ccb: the ccb information this request used.
3723 */
3724static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
3725 struct pm8001_ccb_info *ccb)
3726{
3727 int elem, rc;
3728 struct sas_task *task = ccb->task;
3729 struct domain_device *dev = task->dev;
3730 struct pm8001_device *pm8001_dev = dev->lldd_dev;
3731 struct scatterlist *sg_req, *sg_resp;
3732 u32 req_len, resp_len;
3733 struct smp_req smp_cmd;
3734 u32 opc;
3735 struct inbound_queue_table *circularQ;
3736
3737 memset(&smp_cmd, 0, sizeof(smp_cmd));
3738 /*
3739 * DMA-map SMP request, response buffers
3740 */
3741 sg_req = &task->smp_task.smp_req;
3742 elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
3743 if (!elem)
3744 return -ENOMEM;
3745 req_len = sg_dma_len(sg_req);
3746
3747 sg_resp = &task->smp_task.smp_resp;
3748 elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
3749 if (!elem) {
3750 rc = -ENOMEM;
3751 goto err_out;
3752 }
3753 resp_len = sg_dma_len(sg_resp);
3754 /* must be in dwords */
3755 if ((req_len & 0x3) || (resp_len & 0x3)) {
3756 rc = -EINVAL;
3757 goto err_out_2;
3758 }
3759
3760 opc = OPC_INB_SMP_REQUEST;
3761 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3762 smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
3763 smp_cmd.long_smp_req.long_req_addr =
3764 cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
3765 smp_cmd.long_smp_req.long_req_size =
3766 cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
3767 smp_cmd.long_smp_req.long_resp_addr =
3768 cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
3769 smp_cmd.long_smp_req.long_resp_size =
3770 cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
3771 build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
3772 mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd);
3773 return 0;
3774
3775err_out_2:
3776 dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
3777 PCI_DMA_FROMDEVICE);
3778err_out:
3779 dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
3780 PCI_DMA_TODEVICE);
3781 return rc;
3782}
3783
3784/**
3785 * pm8001_chip_ssp_io_req - send a SSP task to FW
3786 * @pm8001_ha: our hba card information.
3787 * @ccb: the ccb information this request used.
3788 */
3789static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
3790 struct pm8001_ccb_info *ccb)
3791{
3792 struct sas_task *task = ccb->task;
3793 struct domain_device *dev = task->dev;
3794 struct pm8001_device *pm8001_dev = dev->lldd_dev;
3795 struct ssp_ini_io_start_req ssp_cmd;
3796 u32 tag = ccb->ccb_tag;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3797 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3798 __le64 phys_addr;
3799 struct inbound_queue_table *circularQ;
3800 u32 opc = OPC_INB_SSPINIIOSTART;
3801 memset(&ssp_cmd, 0, sizeof(ssp_cmd));
3802 memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
jack wangafc5ca92009-12-07 17:22:47 +0800[diff] [blame]3803 ssp_cmd.dir_m_tlr =
3804 cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3805 SAS 1.1 compatible TLR*/
3806 ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
3807 ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
3808 ssp_cmd.tag = cpu_to_le32(tag);
3809 if (task->ssp_task.enable_first_burst)
3810 ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
3811 ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
3812 ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
3813 memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
3814 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3815
3816 /* fill in PRD (scatter/gather) table, if any */
3817 if (task->num_scatter > 1) {
3818 pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
3819 phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
3820 offsetof(struct pm8001_ccb_info, buf_prd[0]));
3821 ssp_cmd.addr_low = lower_32_bits(phys_addr);
3822 ssp_cmd.addr_high = upper_32_bits(phys_addr);
3823 ssp_cmd.esgl = cpu_to_le32(1<<31);
3824 } else if (task->num_scatter == 1) {
3825 __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
3826 ssp_cmd.addr_low = lower_32_bits(dma_addr);
3827 ssp_cmd.addr_high = upper_32_bits(dma_addr);
3828 ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
3829 ssp_cmd.esgl = 0;
3830 } else if (task->num_scatter == 0) {
3831 ssp_cmd.addr_low = 0;
3832 ssp_cmd.addr_high = 0;
3833 ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
3834 ssp_cmd.esgl = 0;
3835 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3836 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd);
3837 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3838}
3839
3840static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
3841 struct pm8001_ccb_info *ccb)
3842{
3843 struct sas_task *task = ccb->task;
3844 struct domain_device *dev = task->dev;
3845 struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
3846 u32 tag = ccb->ccb_tag;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3847 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3848 struct sata_start_req sata_cmd;
3849 u32 hdr_tag, ncg_tag = 0;
3850 __le64 phys_addr;
3851 u32 ATAP = 0x0;
3852 u32 dir;
3853 struct inbound_queue_table *circularQ;
3854 u32 opc = OPC_INB_SATA_HOST_OPSTART;
3855 memset(&sata_cmd, 0, sizeof(sata_cmd));
3856 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3857 if (task->data_dir == PCI_DMA_NONE) {
3858 ATAP = 0x04; /* no data*/
3859 PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data \n"));
3860 } else if (likely(!task->ata_task.device_control_reg_update)) {
3861 if (task->ata_task.dma_xfer) {
3862 ATAP = 0x06; /* DMA */
3863 PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA \n"));
3864 } else {
3865 ATAP = 0x05; /* PIO*/
3866 PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO \n"));
3867 }
3868 if (task->ata_task.use_ncq &&
3869 dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
3870 ATAP = 0x07; /* FPDMA */
3871 PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA \n"));
3872 }
3873 }
3874 if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
jack wangafc5ca92009-12-07 17:22:47 +0800[diff] [blame]3875 ncg_tag = hdr_tag;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3876 dir = data_dir_flags[task->data_dir] << 8;
3877 sata_cmd.tag = cpu_to_le32(tag);
3878 sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
3879 sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
3880 sata_cmd.ncqtag_atap_dir_m =
3881 cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir);
3882 sata_cmd.sata_fis = task->ata_task.fis;
3883 if (likely(!task->ata_task.device_control_reg_update))
3884 sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
3885 sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
3886 /* fill in PRD (scatter/gather) table, if any */
3887 if (task->num_scatter > 1) {
3888 pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
3889 phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
3890 offsetof(struct pm8001_ccb_info, buf_prd[0]));
3891 sata_cmd.addr_low = lower_32_bits(phys_addr);
3892 sata_cmd.addr_high = upper_32_bits(phys_addr);
3893 sata_cmd.esgl = cpu_to_le32(1 << 31);
3894 } else if (task->num_scatter == 1) {
3895 __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
3896 sata_cmd.addr_low = lower_32_bits(dma_addr);
3897 sata_cmd.addr_high = upper_32_bits(dma_addr);
3898 sata_cmd.len = cpu_to_le32(task->total_xfer_len);
3899 sata_cmd.esgl = 0;
3900 } else if (task->num_scatter == 0) {
3901 sata_cmd.addr_low = 0;
3902 sata_cmd.addr_high = 0;
3903 sata_cmd.len = cpu_to_le32(task->total_xfer_len);
3904 sata_cmd.esgl = 0;
3905 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3906 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd);
3907 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3908}
3909
3910/**
3911 * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND
3912 * @pm8001_ha: our hba card information.
3913 * @num: the inbound queue number
3914 * @phy_id: the phy id which we wanted to start up.
3915 */
3916static int
3917pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
3918{
3919 struct phy_start_req payload;
3920 struct inbound_queue_table *circularQ;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3921 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3922 u32 tag = 0x01;
3923 u32 opcode = OPC_INB_PHYSTART;
3924 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3925 memset(&payload, 0, sizeof(payload));
3926 payload.tag = cpu_to_le32(tag);
3927 /*
3928 ** [0:7] PHY Identifier
3929 ** [8:11] link rate 1.5G, 3G, 6G
3930 ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b both
3931 ** [14] 0b disable spin up hold; 1b enable spin up hold
3932 */
3933 payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
3934 LINKMODE_AUTO | LINKRATE_15 |
3935 LINKRATE_30 | LINKRATE_60 | phy_id);
3936 payload.sas_identify.dev_type = SAS_END_DEV;
3937 payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
3938 memcpy(payload.sas_identify.sas_addr,
3939 pm8001_ha->sas_addr, SAS_ADDR_SIZE);
3940 payload.sas_identify.phy_id = phy_id;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3941 ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
3942 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3943}
3944
3945/**
3946 * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
3947 * @pm8001_ha: our hba card information.
3948 * @num: the inbound queue number
3949 * @phy_id: the phy id which we wanted to start up.
3950 */
3951static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
3952 u8 phy_id)
3953{
3954 struct phy_stop_req payload;
3955 struct inbound_queue_table *circularQ;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3956 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3957 u32 tag = 0x01;
3958 u32 opcode = OPC_INB_PHYSTOP;
3959 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3960 memset(&payload, 0, sizeof(payload));
3961 payload.tag = cpu_to_le32(tag);
3962 payload.phy_id = cpu_to_le32(phy_id);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3963 ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
3964 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3965}
3966
3967/**
3968 * see comments on mpi_reg_resp.
3969 */
3970static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
3971 struct pm8001_device *pm8001_dev, u32 flag)
3972{
3973 struct reg_dev_req payload;
3974 u32 opc;
3975 u32 stp_sspsmp_sata = 0x4;
3976 struct inbound_queue_table *circularQ;
3977 u32 linkrate, phy_id;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]3978 int rc, tag = 0xdeadbeef;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]3979 struct pm8001_ccb_info *ccb;
3980 u8 retryFlag = 0x1;
3981 u16 firstBurstSize = 0;
3982 u16 ITNT = 2000;
3983 struct domain_device *dev = pm8001_dev->sas_device;
3984 struct domain_device *parent_dev = dev->parent;
3985 circularQ = &pm8001_ha->inbnd_q_tbl[0];
3986
3987 memset(&payload, 0, sizeof(payload));
3988 rc = pm8001_tag_alloc(pm8001_ha, &tag);
3989 if (rc)
3990 return rc;
3991 ccb = &pm8001_ha->ccb_info[tag];
3992 ccb->device = pm8001_dev;
3993 ccb->ccb_tag = tag;
3994 payload.tag = cpu_to_le32(tag);
3995 if (flag == 1)
3996 stp_sspsmp_sata = 0x02; /*direct attached sata */
3997 else {
3998 if (pm8001_dev->dev_type == SATA_DEV)
3999 stp_sspsmp_sata = 0x00; /* stp*/
4000 else if (pm8001_dev->dev_type == SAS_END_DEV ||
4001 pm8001_dev->dev_type == EDGE_DEV ||
4002 pm8001_dev->dev_type == FANOUT_DEV)
4003 stp_sspsmp_sata = 0x01; /*ssp or smp*/
4004 }
4005 if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
4006 phy_id = parent_dev->ex_dev.ex_phy->phy_id;
4007 else
4008 phy_id = pm8001_dev->attached_phy;
4009 opc = OPC_INB_REG_DEV;
4010 linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
4011 pm8001_dev->sas_device->linkrate : dev->port->linkrate;
4012 payload.phyid_portid =
4013 cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0x0F) |
4014 ((phy_id & 0x0F) << 4));
4015 payload.dtype_dlr_retry = cpu_to_le32((retryFlag & 0x01) |
4016 ((linkrate & 0x0F) * 0x1000000) |
4017 ((stp_sspsmp_sata & 0x03) * 0x10000000));
4018 payload.firstburstsize_ITNexustimeout =
4019 cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
jack wangafc5ca92009-12-07 17:22:47 +0800[diff] [blame]4020 memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4021 SAS_ADDR_SIZE);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4022 rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4023 return rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4024}
4025
4026/**
4027 * see comments on mpi_reg_resp.
4028 */
4029static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
4030 u32 device_id)
4031{
4032 struct dereg_dev_req payload;
4033 u32 opc = OPC_INB_DEREG_DEV_HANDLE;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4034 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4035 struct inbound_queue_table *circularQ;
4036
4037 circularQ = &pm8001_ha->inbnd_q_tbl[0];
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4038 memset(&payload, 0, sizeof(payload));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4039 payload.tag = 1;
4040 payload.device_id = cpu_to_le32(device_id);
4041 PM8001_MSG_DBG(pm8001_ha,
4042 pm8001_printk("unregister device device_id = %d\n", device_id));
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4043 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4044 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4045}
4046
4047/**
4048 * pm8001_chip_phy_ctl_req - support the local phy operation
4049 * @pm8001_ha: our hba card information.
4050 * @num: the inbound queue number
4051 * @phy_id: the phy id which we wanted to operate
4052 * @phy_op:
4053 */
4054static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
4055 u32 phyId, u32 phy_op)
4056{
4057 struct local_phy_ctl_req payload;
4058 struct inbound_queue_table *circularQ;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4059 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4060 u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
4061 memset((u8 *)&payload, 0, sizeof(payload));
4062 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4063 payload.tag = 1;
4064 payload.phyop_phyid =
4065 cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4066 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4067 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4068}
4069
4070static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
4071{
4072 u32 value;
4073#ifdef PM8001_USE_MSIX
4074 return 1;
4075#endif
4076 value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
4077 if (value)
4078 return 1;
4079 return 0;
4080
4081}
4082
4083/**
4084 * pm8001_chip_isr - PM8001 isr handler.
4085 * @pm8001_ha: our hba card information.
4086 * @irq: irq number.
4087 * @stat: stat.
4088 */
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4089static irqreturn_t
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4090pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha)
4091{
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4092 unsigned long flags;
4093 spin_lock_irqsave(&pm8001_ha->lock, flags);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4094 pm8001_chip_interrupt_disable(pm8001_ha);
4095 process_oq(pm8001_ha);
4096 pm8001_chip_interrupt_enable(pm8001_ha);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4097 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
4098 return IRQ_HANDLED;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4099}
4100
4101static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
4102 u32 dev_id, u8 flag, u32 task_tag, u32 cmd_tag)
4103{
4104 struct task_abort_req task_abort;
4105 struct inbound_queue_table *circularQ;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4106 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4107 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4108 memset(&task_abort, 0, sizeof(task_abort));
4109 if (ABORT_SINGLE == (flag & ABORT_MASK)) {
4110 task_abort.abort_all = 0;
4111 task_abort.device_id = cpu_to_le32(dev_id);
4112 task_abort.tag_to_abort = cpu_to_le32(task_tag);
4113 task_abort.tag = cpu_to_le32(cmd_tag);
4114 } else if (ABORT_ALL == (flag & ABORT_MASK)) {
4115 task_abort.abort_all = cpu_to_le32(1);
4116 task_abort.device_id = cpu_to_le32(dev_id);
4117 task_abort.tag = cpu_to_le32(cmd_tag);
4118 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4119 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort);
4120 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4121}
4122
4123/**
4124 * pm8001_chip_abort_task - SAS abort task when error or exception happened.
4125 * @task: the task we wanted to aborted.
4126 * @flag: the abort flag.
4127 */
4128static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
4129 struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag)
4130{
4131 u32 opc, device_id;
4132 int rc = TMF_RESP_FUNC_FAILED;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4133 PM8001_EH_DBG(pm8001_ha, pm8001_printk("cmd_tag = %x, abort task tag"
4134 " = %x", cmd_tag, task_tag));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4135 if (pm8001_dev->dev_type == SAS_END_DEV)
4136 opc = OPC_INB_SSP_ABORT;
4137 else if (pm8001_dev->dev_type == SATA_DEV)
4138 opc = OPC_INB_SATA_ABORT;
4139 else
4140 opc = OPC_INB_SMP_ABORT;/* SMP */
4141 device_id = pm8001_dev->device_id;
4142 rc = send_task_abort(pm8001_ha, opc, device_id, flag,
4143 task_tag, cmd_tag);
4144 if (rc != TMF_RESP_FUNC_COMPLETE)
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4145 PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4146 return rc;
4147}
4148
4149/**
4150 * pm8001_chip_ssp_tm_req - built the task managment command.
4151 * @pm8001_ha: our hba card information.
4152 * @ccb: the ccb information.
4153 * @tmf: task management function.
4154 */
4155static int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
4156 struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
4157{
4158 struct sas_task *task = ccb->task;
4159 struct domain_device *dev = task->dev;
4160 struct pm8001_device *pm8001_dev = dev->lldd_dev;
4161 u32 opc = OPC_INB_SSPINITMSTART;
4162 struct inbound_queue_table *circularQ;
4163 struct ssp_ini_tm_start_req sspTMCmd;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4164 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4165
4166 memset(&sspTMCmd, 0, sizeof(sspTMCmd));
4167 sspTMCmd.device_id = cpu_to_le32(pm8001_dev->device_id);
4168 sspTMCmd.relate_tag = cpu_to_le32(tmf->tag_of_task_to_be_managed);
4169 sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4170 memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
4171 sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
4172 circularQ = &pm8001_ha->inbnd_q_tbl[0];
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4173 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd);
4174 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4175}
4176
4177static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
4178 void *payload)
4179{
4180 u32 opc = OPC_INB_GET_NVMD_DATA;
4181 u32 nvmd_type;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4182 int rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4183 u32 tag;
4184 struct pm8001_ccb_info *ccb;
4185 struct inbound_queue_table *circularQ;
4186 struct get_nvm_data_req nvmd_req;
4187 struct fw_control_ex *fw_control_context;
4188 struct pm8001_ioctl_payload *ioctl_payload = payload;
4189
4190 nvmd_type = ioctl_payload->minor_function;
4191 fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
4192 fw_control_context->usrAddr = (u8 *)&ioctl_payload->func_specific[0];
4193 fw_control_context->len = ioctl_payload->length;
4194 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4195 memset(&nvmd_req, 0, sizeof(nvmd_req));
4196 rc = pm8001_tag_alloc(pm8001_ha, &tag);
4197 if (rc)
4198 return rc;
4199 ccb = &pm8001_ha->ccb_info[tag];
4200 ccb->ccb_tag = tag;
4201 ccb->fw_control_context = fw_control_context;
4202 nvmd_req.tag = cpu_to_le32(tag);
4203
4204 switch (nvmd_type) {
4205 case TWI_DEVICE: {
4206 u32 twi_addr, twi_page_size;
4207 twi_addr = 0xa8;
4208 twi_page_size = 2;
4209
4210 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
4211 twi_page_size << 8 | TWI_DEVICE);
4212 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4213 nvmd_req.resp_addr_hi =
4214 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4215 nvmd_req.resp_addr_lo =
4216 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4217 break;
4218 }
4219 case C_SEEPROM: {
4220 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
4221 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4222 nvmd_req.resp_addr_hi =
4223 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4224 nvmd_req.resp_addr_lo =
4225 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4226 break;
4227 }
4228 case VPD_FLASH: {
4229 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
4230 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4231 nvmd_req.resp_addr_hi =
4232 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4233 nvmd_req.resp_addr_lo =
4234 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4235 break;
4236 }
4237 case EXPAN_ROM: {
4238 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
4239 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4240 nvmd_req.resp_addr_hi =
4241 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4242 nvmd_req.resp_addr_lo =
4243 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4244 break;
4245 }
4246 default:
4247 break;
4248 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4249 rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
4250 return rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4251}
4252
4253static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
4254 void *payload)
4255{
4256 u32 opc = OPC_INB_SET_NVMD_DATA;
4257 u32 nvmd_type;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4258 int rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4259 u32 tag;
4260 struct pm8001_ccb_info *ccb;
4261 struct inbound_queue_table *circularQ;
4262 struct set_nvm_data_req nvmd_req;
4263 struct fw_control_ex *fw_control_context;
4264 struct pm8001_ioctl_payload *ioctl_payload = payload;
4265
4266 nvmd_type = ioctl_payload->minor_function;
4267 fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
4268 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4269 memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
4270 ioctl_payload->func_specific,
4271 ioctl_payload->length);
4272 memset(&nvmd_req, 0, sizeof(nvmd_req));
4273 rc = pm8001_tag_alloc(pm8001_ha, &tag);
4274 if (rc)
4275 return rc;
4276 ccb = &pm8001_ha->ccb_info[tag];
4277 ccb->fw_control_context = fw_control_context;
4278 ccb->ccb_tag = tag;
4279 nvmd_req.tag = cpu_to_le32(tag);
4280 switch (nvmd_type) {
4281 case TWI_DEVICE: {
4282 u32 twi_addr, twi_page_size;
4283 twi_addr = 0xa8;
4284 twi_page_size = 2;
4285 nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
4286 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
4287 twi_page_size << 8 | TWI_DEVICE);
4288 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4289 nvmd_req.resp_addr_hi =
4290 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4291 nvmd_req.resp_addr_lo =
4292 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4293 break;
4294 }
4295 case C_SEEPROM:
4296 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
4297 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4298 nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
4299 nvmd_req.resp_addr_hi =
4300 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4301 nvmd_req.resp_addr_lo =
4302 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4303 break;
4304 case VPD_FLASH:
4305 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
4306 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4307 nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
4308 nvmd_req.resp_addr_hi =
4309 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4310 nvmd_req.resp_addr_lo =
4311 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4312 break;
4313 case EXPAN_ROM:
4314 nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
4315 nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
4316 nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
4317 nvmd_req.resp_addr_hi =
4318 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
4319 nvmd_req.resp_addr_lo =
4320 cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
4321 break;
4322 default:
4323 break;
4324 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4325 rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
4326 return rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4327}
4328
4329/**
4330 * pm8001_chip_fw_flash_update_build - support the firmware update operation
4331 * @pm8001_ha: our hba card information.
4332 * @fw_flash_updata_info: firmware flash update param
4333 */
4334static int
4335pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
4336 void *fw_flash_updata_info, u32 tag)
4337{
4338 struct fw_flash_Update_req payload;
4339 struct fw_flash_updata_info *info;
4340 struct inbound_queue_table *circularQ;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4341 int ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4342 u32 opc = OPC_INB_FW_FLASH_UPDATE;
4343
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4344 memset(&payload, 0, sizeof(struct fw_flash_Update_req));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4345 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4346 info = fw_flash_updata_info;
4347 payload.tag = cpu_to_le32(tag);
4348 payload.cur_image_len = cpu_to_le32(info->cur_image_len);
4349 payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
4350 payload.total_image_len = cpu_to_le32(info->total_image_len);
4351 payload.len = info->sgl.im_len.len ;
4352 payload.sgl_addr_lo = lower_32_bits(info->sgl.addr);
4353 payload.sgl_addr_hi = upper_32_bits(info->sgl.addr);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4354 ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4355 return ret;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4356}
4357
4358static int
4359pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
4360 void *payload)
4361{
4362 struct fw_flash_updata_info flash_update_info;
4363 struct fw_control_info *fw_control;
4364 struct fw_control_ex *fw_control_context;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4365 int rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4366 u32 tag;
4367 struct pm8001_ccb_info *ccb;
4368 void *buffer = NULL;
4369 dma_addr_t phys_addr;
4370 u32 phys_addr_hi;
4371 u32 phys_addr_lo;
4372 struct pm8001_ioctl_payload *ioctl_payload = payload;
4373
4374 fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
4375 fw_control = (struct fw_control_info *)&ioctl_payload->func_specific[0];
4376 if (fw_control->len != 0) {
4377 if (pm8001_mem_alloc(pm8001_ha->pdev,
4378 (void **)&buffer,
4379 &phys_addr,
4380 &phys_addr_hi,
4381 &phys_addr_lo,
4382 fw_control->len, 0) != 0) {
4383 PM8001_FAIL_DBG(pm8001_ha,
4384 pm8001_printk("Mem alloc failure\n"));
4385 return -ENOMEM;
4386 }
4387 }
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4388 memset(buffer, 0, fw_control->len);
4389 memcpy(buffer, fw_control->buffer, fw_control->len);
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4390 flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
4391 flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
4392 flash_update_info.sgl.im_len.e = 0;
4393 flash_update_info.cur_image_offset = fw_control->offset;
4394 flash_update_info.cur_image_len = fw_control->len;
4395 flash_update_info.total_image_len = fw_control->size;
4396 fw_control_context->fw_control = fw_control;
4397 fw_control_context->virtAddr = buffer;
4398 fw_control_context->len = fw_control->len;
4399 rc = pm8001_tag_alloc(pm8001_ha, &tag);
4400 if (rc)
4401 return rc;
4402 ccb = &pm8001_ha->ccb_info[tag];
4403 ccb->fw_control_context = fw_control_context;
4404 ccb->ccb_tag = tag;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4405 rc = pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info,
4406 tag);
4407 return rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4408}
4409
4410static int
4411pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
4412 struct pm8001_device *pm8001_dev, u32 state)
4413{
4414 struct set_dev_state_req payload;
4415 struct inbound_queue_table *circularQ;
4416 struct pm8001_ccb_info *ccb;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4417 int rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4418 u32 tag;
4419 u32 opc = OPC_INB_SET_DEVICE_STATE;
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4420 memset(&payload, 0, sizeof(payload));
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4421 rc = pm8001_tag_alloc(pm8001_ha, &tag);
4422 if (rc)
4423 return -1;
4424 ccb = &pm8001_ha->ccb_info[tag];
4425 ccb->ccb_tag = tag;
4426 ccb->device = pm8001_dev;
4427 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4428 payload.tag = cpu_to_le32(tag);
4429 payload.device_id = cpu_to_le32(pm8001_dev->device_id);
4430 payload.nds = cpu_to_le32(state);
jack_wang72d0baa2009-11-05 22:33:35 +0800[diff] [blame]4431 rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4432 return rc;
4433
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]4434}
4435
4436static int
4437pm8001_chip_sas_re_initialization(struct pm8001_hba_info *pm8001_ha)
4438{
4439 struct sas_re_initialization_req payload;
4440 struct inbound_queue_table *circularQ;
4441 struct pm8001_ccb_info *ccb;
4442 int rc;
4443 u32 tag;
4444 u32 opc = OPC_INB_SAS_RE_INITIALIZE;
4445 memset(&payload, 0, sizeof(payload));
4446 rc = pm8001_tag_alloc(pm8001_ha, &tag);
4447 if (rc)
4448 return -1;
4449 ccb = &pm8001_ha->ccb_info[tag];
4450 ccb->ccb_tag = tag;
4451 circularQ = &pm8001_ha->inbnd_q_tbl[0];
4452 payload.tag = cpu_to_le32(tag);
4453 payload.SSAHOLT = cpu_to_le32(0xd << 25);
4454 payload.sata_hol_tmo = cpu_to_le32(80);
4455 payload.open_reject_cmdretries_data_retries = cpu_to_le32(0xff00ff);
4456 rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
4457 return rc;
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4458
4459}
4460
4461const struct pm8001_dispatch pm8001_8001_dispatch = {
4462 .name = "pmc8001",
4463 .chip_init = pm8001_chip_init,
4464 .chip_soft_rst = pm8001_chip_soft_rst,
4465 .chip_rst = pm8001_hw_chip_rst,
4466 .chip_iounmap = pm8001_chip_iounmap,
4467 .isr = pm8001_chip_isr,
4468 .is_our_interupt = pm8001_chip_is_our_interupt,
4469 .isr_process_oq = process_oq,
4470 .interrupt_enable = pm8001_chip_interrupt_enable,
4471 .interrupt_disable = pm8001_chip_interrupt_disable,
4472 .make_prd = pm8001_chip_make_sg,
4473 .smp_req = pm8001_chip_smp_req,
4474 .ssp_io_req = pm8001_chip_ssp_io_req,
4475 .sata_req = pm8001_chip_sata_req,
4476 .phy_start_req = pm8001_chip_phy_start_req,
4477 .phy_stop_req = pm8001_chip_phy_stop_req,
4478 .reg_dev_req = pm8001_chip_reg_dev_req,
4479 .dereg_dev_req = pm8001_chip_dereg_dev_req,
4480 .phy_ctl_req = pm8001_chip_phy_ctl_req,
4481 .task_abort = pm8001_chip_abort_task,
4482 .ssp_tm_req = pm8001_chip_ssp_tm_req,
4483 .get_nvmd_req = pm8001_chip_get_nvmd_req,
4484 .set_nvmd_req = pm8001_chip_set_nvmd_req,
4485 .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
4486 .set_dev_state_req = pm8001_chip_set_dev_state_req,
jack_wangd0b68042009-11-05 22:32:31 +0800[diff] [blame]4487 .sas_re_init_req = pm8001_chip_sas_re_initialization,
jack wangdbf9bfe2009-10-14 16:19:21 +0800[diff] [blame]4488};
4489