blob: 2aa3c761dd83a1006b4b9d56c7a7908df365c94b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * WaveLAN ISA driver
3 *
4 * Jean II - HPLB '96
5 *
6 * Reorganisation and extension of the driver.
7 * Original copyright follows (also see the end of this file).
8 * See wavelan.p.h for details.
9 *
10 *
11 *
12 * AT&T GIS (nee NCR) WaveLAN card:
13 * An Ethernet-like radio transceiver
14 * controlled by an Intel 82586 coprocessor.
15 */
16
17#include "wavelan.p.h" /* Private header */
18
19/************************* MISC SUBROUTINES **************************/
20/*
21 * Subroutines which won't fit in one of the following category
22 * (WaveLAN modem or i82586)
23 */
24
25/*------------------------------------------------------------------*/
26/*
27 * Translate irq number to PSA irq parameter
28 */
29static u8 wv_irq_to_psa(int irq)
30{
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +020031 if (irq < 0 || irq >= ARRAY_SIZE(irqvals))
Linus Torvalds1da177e2005-04-16 15:20:36 -070032 return 0;
33
34 return irqvals[irq];
35}
36
37/*------------------------------------------------------------------*/
38/*
39 * Translate PSA irq parameter to irq number
40 */
41static int __init wv_psa_to_irq(u8 irqval)
42{
43 int irq;
44
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +020045 for (irq = 0; irq < ARRAY_SIZE(irqvals); irq++)
Linus Torvalds1da177e2005-04-16 15:20:36 -070046 if (irqvals[irq] == irqval)
47 return irq;
48
49 return -1;
50}
51
52#ifdef STRUCT_CHECK
53/*------------------------------------------------------------------*/
54/*
55 * Sanity routine to verify the sizes of the various WaveLAN interface
56 * structures.
57 */
58static char *wv_struct_check(void)
59{
60#define SC(t,s,n) if (sizeof(t) != s) return(n);
61
62 SC(psa_t, PSA_SIZE, "psa_t");
63 SC(mmw_t, MMW_SIZE, "mmw_t");
64 SC(mmr_t, MMR_SIZE, "mmr_t");
65 SC(ha_t, HA_SIZE, "ha_t");
66
67#undef SC
68
69 return ((char *) NULL);
70} /* wv_struct_check */
71#endif /* STRUCT_CHECK */
72
73/********************* HOST ADAPTER SUBROUTINES *********************/
74/*
75 * Useful subroutines to manage the WaveLAN ISA interface
76 *
77 * One major difference with the PCMCIA hardware (except the port mapping)
78 * is that we have to keep the state of the Host Control Register
79 * because of the interrupt enable & bus size flags.
80 */
81
82/*------------------------------------------------------------------*/
83/*
84 * Read from card's Host Adaptor Status Register.
85 */
86static inline u16 hasr_read(unsigned long ioaddr)
87{
88 return (inw(HASR(ioaddr)));
89} /* hasr_read */
90
91/*------------------------------------------------------------------*/
92/*
93 * Write to card's Host Adapter Command Register.
94 */
95static inline void hacr_write(unsigned long ioaddr, u16 hacr)
96{
97 outw(hacr, HACR(ioaddr));
98} /* hacr_write */
99
100/*------------------------------------------------------------------*/
101/*
102 * Write to card's Host Adapter Command Register. Include a delay for
103 * those times when it is needed.
104 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800105static void hacr_write_slow(unsigned long ioaddr, u16 hacr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106{
107 hacr_write(ioaddr, hacr);
108 /* delay might only be needed sometimes */
109 mdelay(1);
110} /* hacr_write_slow */
111
112/*------------------------------------------------------------------*/
113/*
114 * Set the channel attention bit.
115 */
116static inline void set_chan_attn(unsigned long ioaddr, u16 hacr)
117{
118 hacr_write(ioaddr, hacr | HACR_CA);
119} /* set_chan_attn */
120
121/*------------------------------------------------------------------*/
122/*
123 * Reset, and then set host adaptor into default mode.
124 */
125static inline void wv_hacr_reset(unsigned long ioaddr)
126{
127 hacr_write_slow(ioaddr, HACR_RESET);
128 hacr_write(ioaddr, HACR_DEFAULT);
129} /* wv_hacr_reset */
130
131/*------------------------------------------------------------------*/
132/*
133 * Set the I/O transfer over the ISA bus to 8-bit mode
134 */
135static inline void wv_16_off(unsigned long ioaddr, u16 hacr)
136{
137 hacr &= ~HACR_16BITS;
138 hacr_write(ioaddr, hacr);
139} /* wv_16_off */
140
141/*------------------------------------------------------------------*/
142/*
143 * Set the I/O transfer over the ISA bus to 8-bit mode
144 */
145static inline void wv_16_on(unsigned long ioaddr, u16 hacr)
146{
147 hacr |= HACR_16BITS;
148 hacr_write(ioaddr, hacr);
149} /* wv_16_on */
150
151/*------------------------------------------------------------------*/
152/*
153 * Disable interrupts on the WaveLAN hardware.
154 * (called by wv_82586_stop())
155 */
156static inline void wv_ints_off(struct net_device * dev)
157{
158 net_local *lp = (net_local *) dev->priv;
159 unsigned long ioaddr = dev->base_addr;
160
161 lp->hacr &= ~HACR_INTRON;
162 hacr_write(ioaddr, lp->hacr);
163} /* wv_ints_off */
164
165/*------------------------------------------------------------------*/
166/*
167 * Enable interrupts on the WaveLAN hardware.
168 * (called by wv_hw_reset())
169 */
170static inline void wv_ints_on(struct net_device * dev)
171{
172 net_local *lp = (net_local *) dev->priv;
173 unsigned long ioaddr = dev->base_addr;
174
175 lp->hacr |= HACR_INTRON;
176 hacr_write(ioaddr, lp->hacr);
177} /* wv_ints_on */
178
179/******************* MODEM MANAGEMENT SUBROUTINES *******************/
180/*
181 * Useful subroutines to manage the modem of the WaveLAN
182 */
183
184/*------------------------------------------------------------------*/
185/*
186 * Read the Parameter Storage Area from the WaveLAN card's memory
187 */
188/*
189 * Read bytes from the PSA.
190 */
191static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */
192 u8 * b, /* buffer to fill */
193 int n)
194{ /* size to read */
195 wv_16_off(ioaddr, hacr);
196
197 while (n-- > 0) {
198 outw(o, PIOR2(ioaddr));
199 o++;
200 *b++ = inb(PIOP2(ioaddr));
201 }
202
203 wv_16_on(ioaddr, hacr);
204} /* psa_read */
205
206/*------------------------------------------------------------------*/
207/*
208 * Write the Parameter Storage Area to the WaveLAN card's memory.
209 */
210static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */
211 u8 * b, /* Buffer in memory */
212 int n)
213{ /* Length of buffer */
214 int count = 0;
215
216 wv_16_off(ioaddr, hacr);
217
218 while (n-- > 0) {
219 outw(o, PIOR2(ioaddr));
220 o++;
221
222 outb(*b, PIOP2(ioaddr));
223 b++;
224
225 /* Wait for the memory to finish its write cycle */
226 count = 0;
227 while ((count++ < 100) &&
228 (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1);
229 }
230
231 wv_16_on(ioaddr, hacr);
232} /* psa_write */
233
234#ifdef SET_PSA_CRC
235/*------------------------------------------------------------------*/
236/*
237 * Calculate the PSA CRC
238 * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
239 * NOTE: By specifying a length including the CRC position the
240 * returned value should be zero. (i.e. a correct checksum in the PSA)
241 *
242 * The Windows drivers don't use the CRC, but the AP and the PtP tool
243 * depend on it.
244 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800245static u16 psa_crc(u8 * psa, /* The PSA */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246 int size)
247{ /* Number of short for CRC */
248 int byte_cnt; /* Loop on the PSA */
249 u16 crc_bytes = 0; /* Data in the PSA */
250 int bit_cnt; /* Loop on the bits of the short */
251
252 for (byte_cnt = 0; byte_cnt < size; byte_cnt++) {
253 crc_bytes ^= psa[byte_cnt]; /* Its an xor */
254
255 for (bit_cnt = 1; bit_cnt < 9; bit_cnt++) {
256 if (crc_bytes & 0x0001)
257 crc_bytes = (crc_bytes >> 1) ^ 0xA001;
258 else
259 crc_bytes >>= 1;
260 }
261 }
262
263 return crc_bytes;
264} /* psa_crc */
265#endif /* SET_PSA_CRC */
266
267/*------------------------------------------------------------------*/
268/*
269 * update the checksum field in the Wavelan's PSA
270 */
271static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr)
272{
273#ifdef SET_PSA_CRC
274 psa_t psa;
275 u16 crc;
276
277 /* read the parameter storage area */
278 psa_read(ioaddr, hacr, 0, (unsigned char *) &psa, sizeof(psa));
279
280 /* update the checksum */
281 crc = psa_crc((unsigned char *) &psa,
282 sizeof(psa) - sizeof(psa.psa_crc[0]) -
283 sizeof(psa.psa_crc[1])
284 - sizeof(psa.psa_crc_status));
285
286 psa.psa_crc[0] = crc & 0xFF;
287 psa.psa_crc[1] = (crc & 0xFF00) >> 8;
288
289 /* Write it ! */
290 psa_write(ioaddr, hacr, (char *) &psa.psa_crc - (char *) &psa,
291 (unsigned char *) &psa.psa_crc, 2);
292
293#ifdef DEBUG_IOCTL_INFO
294 printk(KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
295 dev->name, psa.psa_crc[0], psa.psa_crc[1]);
296
297 /* Check again (luxury !) */
298 crc = psa_crc((unsigned char *) &psa,
299 sizeof(psa) - sizeof(psa.psa_crc_status));
300
301 if (crc != 0)
302 printk(KERN_WARNING
303 "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n",
304 dev->name);
305#endif /* DEBUG_IOCTL_INFO */
306#endif /* SET_PSA_CRC */
307} /* update_psa_checksum */
308
309/*------------------------------------------------------------------*/
310/*
311 * Write 1 byte to the MMC.
312 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800313static void mmc_out(unsigned long ioaddr, u16 o, u8 d)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314{
315 int count = 0;
316
317 /* Wait for MMC to go idle */
318 while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
319 udelay(10);
320
321 outw((u16) (((u16) d << 8) | (o << 1) | 1), MMCR(ioaddr));
322}
323
324/*------------------------------------------------------------------*/
325/*
326 * Routine to write bytes to the Modem Management Controller.
327 * We start at the end because it is the way it should be!
328 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800329static void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330{
331 o += n;
332 b += n;
333
334 while (n-- > 0)
335 mmc_out(ioaddr, --o, *(--b));
336} /* mmc_write */
337
338/*------------------------------------------------------------------*/
339/*
340 * Read a byte from the MMC.
341 * Optimised version for 1 byte, avoid using memory.
342 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800343static u8 mmc_in(unsigned long ioaddr, u16 o)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344{
345 int count = 0;
346
347 while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
348 udelay(10);
349 outw(o << 1, MMCR(ioaddr));
350
351 while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
352 udelay(10);
353 return (u8) (inw(MMCR(ioaddr)) >> 8);
354}
355
356/*------------------------------------------------------------------*/
357/*
358 * Routine to read bytes from the Modem Management Controller.
359 * The implementation is complicated by a lack of address lines,
360 * which prevents decoding of the low-order bit.
361 * (code has just been moved in the above function)
362 * We start at the end because it is the way it should be!
363 */
364static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n)
365{
366 o += n;
367 b += n;
368
369 while (n-- > 0)
370 *(--b) = mmc_in(ioaddr, --o);
371} /* mmc_read */
372
373/*------------------------------------------------------------------*/
374/*
375 * Get the type of encryption available.
376 */
377static inline int mmc_encr(unsigned long ioaddr)
378{ /* I/O port of the card */
379 int temp;
380
381 temp = mmc_in(ioaddr, mmroff(0, mmr_des_avail));
382 if ((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
383 return 0;
384 else
385 return temp;
386}
387
388/*------------------------------------------------------------------*/
389/*
390 * Wait for the frequency EEPROM to complete a command.
391 * I hope this one will be optimally inlined.
392 */
393static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */
394 int delay, /* Base delay to wait for */
395 int number)
396{ /* Number of time to wait */
397 int count = 0; /* Wait only a limited time */
398
399 while ((count++ < number) &&
400 (mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
401 MMR_FEE_STATUS_BUSY)) udelay(delay);
402}
403
404/*------------------------------------------------------------------*/
405/*
406 * Read bytes from the Frequency EEPROM (frequency select cards).
407 */
408static void fee_read(unsigned long ioaddr, /* I/O port of the card */
409 u16 o, /* destination offset */
410 u16 * b, /* data buffer */
411 int n)
412{ /* number of registers */
413 b += n; /* Position at the end of the area */
414
415 /* Write the address */
416 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
417
418 /* Loop on all buffer */
419 while (n-- > 0) {
420 /* Write the read command */
421 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
422 MMW_FEE_CTRL_READ);
423
424 /* Wait until EEPROM is ready (should be quick). */
425 fee_wait(ioaddr, 10, 100);
426
427 /* Read the value. */
428 *--b = ((mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)) << 8) |
429 mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
430 }
431}
432
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433
434/*------------------------------------------------------------------*/
435/*
436 * Write bytes from the Frequency EEPROM (frequency select cards).
437 * This is a bit complicated, because the frequency EEPROM has to
438 * be unprotected and the write enabled.
439 * Jean II
440 */
441static void fee_write(unsigned long ioaddr, /* I/O port of the card */
442 u16 o, /* destination offset */
443 u16 * b, /* data buffer */
444 int n)
445{ /* number of registers */
446 b += n; /* Position at the end of the area. */
447
448#ifdef EEPROM_IS_PROTECTED /* disabled */
449#ifdef DOESNT_SEEM_TO_WORK /* disabled */
450 /* Ask to read the protected register */
451 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
452
453 fee_wait(ioaddr, 10, 100);
454
455 /* Read the protected register. */
456 printk("Protected 2: %02X-%02X\n",
457 mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)),
458 mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
459#endif /* DOESNT_SEEM_TO_WORK */
460
461 /* Enable protected register. */
462 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
463 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
464
465 fee_wait(ioaddr, 10, 100);
466
467 /* Unprotect area. */
468 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n);
469 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
470#ifdef DOESNT_SEEM_TO_WORK /* disabled */
471 /* or use: */
472 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
473#endif /* DOESNT_SEEM_TO_WORK */
474
475 fee_wait(ioaddr, 10, 100);
476#endif /* EEPROM_IS_PROTECTED */
477
478 /* Write enable. */
479 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
480 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
481
482 fee_wait(ioaddr, 10, 100);
483
484 /* Write the EEPROM address. */
485 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
486
487 /* Loop on all buffer */
488 while (n-- > 0) {
489 /* Write the value. */
490 mmc_out(ioaddr, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
491 mmc_out(ioaddr, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
492
493 /* Write the write command. */
494 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
495 MMW_FEE_CTRL_WRITE);
496
497 /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */
498 mdelay(10);
499 fee_wait(ioaddr, 10, 100);
500 }
501
502 /* Write disable. */
503 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
504 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
505
506 fee_wait(ioaddr, 10, 100);
507
508#ifdef EEPROM_IS_PROTECTED /* disabled */
509 /* Reprotect EEPROM. */
510 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x00);
511 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
512
513 fee_wait(ioaddr, 10, 100);
514#endif /* EEPROM_IS_PROTECTED */
515}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516
517/************************ I82586 SUBROUTINES *************************/
518/*
519 * Useful subroutines to manage the Ethernet controller
520 */
521
522/*------------------------------------------------------------------*/
523/*
524 * Read bytes from the on-board RAM.
525 * Why does inlining this function make it fail?
526 */
527static /*inline */ void obram_read(unsigned long ioaddr,
528 u16 o, u8 * b, int n)
529{
530 outw(o, PIOR1(ioaddr));
531 insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
532}
533
534/*------------------------------------------------------------------*/
535/*
536 * Write bytes to the on-board RAM.
537 */
538static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n)
539{
540 outw(o, PIOR1(ioaddr));
541 outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
542}
543
544/*------------------------------------------------------------------*/
545/*
546 * Acknowledge the reading of the status issued by the i82586.
547 */
548static void wv_ack(struct net_device * dev)
549{
550 net_local *lp = (net_local *) dev->priv;
551 unsigned long ioaddr = dev->base_addr;
552 u16 scb_cs;
553 int i;
554
555 obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
556 (unsigned char *) &scb_cs, sizeof(scb_cs));
557 scb_cs &= SCB_ST_INT;
558
559 if (scb_cs == 0)
560 return;
561
562 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
563 (unsigned char *) &scb_cs, sizeof(scb_cs));
564
565 set_chan_attn(ioaddr, lp->hacr);
566
567 for (i = 1000; i > 0; i--) {
568 obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
569 (unsigned char *) &scb_cs, sizeof(scb_cs));
570 if (scb_cs == 0)
571 break;
572
573 udelay(10);
574 }
575 udelay(100);
576
577#ifdef DEBUG_CONFIG_ERROR
578 if (i <= 0)
579 printk(KERN_INFO
580 "%s: wv_ack(): board not accepting command.\n",
581 dev->name);
582#endif
583}
584
585/*------------------------------------------------------------------*/
586/*
587 * Set channel attention bit and busy wait until command has
588 * completed, then acknowledge completion of the command.
589 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800590static int wv_synchronous_cmd(struct net_device * dev, const char *str)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591{
592 net_local *lp = (net_local *) dev->priv;
593 unsigned long ioaddr = dev->base_addr;
594 u16 scb_cmd;
595 ach_t cb;
596 int i;
597
598 scb_cmd = SCB_CMD_CUC & SCB_CMD_CUC_GO;
599 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
600 (unsigned char *) &scb_cmd, sizeof(scb_cmd));
601
602 set_chan_attn(ioaddr, lp->hacr);
603
604 for (i = 1000; i > 0; i--) {
605 obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb,
606 sizeof(cb));
607 if (cb.ac_status & AC_SFLD_C)
608 break;
609
610 udelay(10);
611 }
612 udelay(100);
613
614 if (i <= 0 || !(cb.ac_status & AC_SFLD_OK)) {
615#ifdef DEBUG_CONFIG_ERROR
616 printk(KERN_INFO "%s: %s failed; status = 0x%x\n",
617 dev->name, str, cb.ac_status);
618#endif
619#ifdef DEBUG_I82586_SHOW
620 wv_scb_show(ioaddr);
621#endif
622 return -1;
623 }
624
625 /* Ack the status */
626 wv_ack(dev);
627
628 return 0;
629}
630
631/*------------------------------------------------------------------*/
632/*
633 * Configuration commands completion interrupt.
634 * Check if done, and if OK.
635 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800636static int
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
638{
639 unsigned short mcs_addr;
640 unsigned short status;
641 int ret;
642
643#ifdef DEBUG_INTERRUPT_TRACE
644 printk(KERN_DEBUG "%s: ->wv_config_complete()\n", dev->name);
645#endif
646
647 mcs_addr = lp->tx_first_in_use + sizeof(ac_tx_t) + sizeof(ac_nop_t)
648 + sizeof(tbd_t) + sizeof(ac_cfg_t) + sizeof(ac_ias_t);
649
650 /* Read the status of the last command (set mc list). */
651 obram_read(ioaddr, acoff(mcs_addr, ac_status),
652 (unsigned char *) &status, sizeof(status));
653
654 /* If not completed -> exit */
655 if ((status & AC_SFLD_C) == 0)
656 ret = 0; /* Not ready to be scrapped */
657 else {
658#ifdef DEBUG_CONFIG_ERROR
659 unsigned short cfg_addr;
660 unsigned short ias_addr;
661
662 /* Check mc_config command */
663 if ((status & AC_SFLD_OK) != AC_SFLD_OK)
664 printk(KERN_INFO
665 "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n",
666 dev->name, status);
667
668 /* check ia-config command */
669 ias_addr = mcs_addr - sizeof(ac_ias_t);
670 obram_read(ioaddr, acoff(ias_addr, ac_status),
671 (unsigned char *) &status, sizeof(status));
672 if ((status & AC_SFLD_OK) != AC_SFLD_OK)
673 printk(KERN_INFO
674 "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n",
675 dev->name, status);
676
677 /* Check config command. */
678 cfg_addr = ias_addr - sizeof(ac_cfg_t);
679 obram_read(ioaddr, acoff(cfg_addr, ac_status),
680 (unsigned char *) &status, sizeof(status));
681 if ((status & AC_SFLD_OK) != AC_SFLD_OK)
682 printk(KERN_INFO
683 "%s: wv_config_complete(): configure failed; status = 0x%x\n",
684 dev->name, status);
685#endif /* DEBUG_CONFIG_ERROR */
686
687 ret = 1; /* Ready to be scrapped */
688 }
689
690#ifdef DEBUG_INTERRUPT_TRACE
691 printk(KERN_DEBUG "%s: <-wv_config_complete() - %d\n", dev->name,
692 ret);
693#endif
694 return ret;
695}
696
697/*------------------------------------------------------------------*/
698/*
699 * Command completion interrupt.
700 * Reclaim as many freed tx buffers as we can.
701 * (called in wavelan_interrupt()).
702 * Note : the spinlock is already grabbed for us.
703 */
704static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
705{
706 int nreaped = 0;
707
708#ifdef DEBUG_INTERRUPT_TRACE
709 printk(KERN_DEBUG "%s: ->wv_complete()\n", dev->name);
710#endif
711
712 /* Loop on all the transmit buffers */
713 while (lp->tx_first_in_use != I82586NULL) {
714 unsigned short tx_status;
715
716 /* Read the first transmit buffer */
717 obram_read(ioaddr, acoff(lp->tx_first_in_use, ac_status),
718 (unsigned char *) &tx_status,
719 sizeof(tx_status));
720
721 /* If not completed -> exit */
722 if ((tx_status & AC_SFLD_C) == 0)
723 break;
724
725 /* Hack for reconfiguration */
726 if (tx_status == 0xFFFF)
727 if (!wv_config_complete(dev, ioaddr, lp))
728 break; /* Not completed */
729
730 /* We now remove this buffer */
731 nreaped++;
732 --lp->tx_n_in_use;
733
734/*
735if (lp->tx_n_in_use > 0)
736 printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]);
737*/
738
739 /* Was it the last one? */
740 if (lp->tx_n_in_use <= 0)
741 lp->tx_first_in_use = I82586NULL;
742 else {
743 /* Next one in the chain */
744 lp->tx_first_in_use += TXBLOCKZ;
745 if (lp->tx_first_in_use >=
746 OFFSET_CU +
747 NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -=
748 NTXBLOCKS * TXBLOCKZ;
749 }
750
751 /* Hack for reconfiguration */
752 if (tx_status == 0xFFFF)
753 continue;
754
755 /* Now, check status of the finished command */
756 if (tx_status & AC_SFLD_OK) {
757 int ncollisions;
758
759 lp->stats.tx_packets++;
760 ncollisions = tx_status & AC_SFLD_MAXCOL;
761 lp->stats.collisions += ncollisions;
762#ifdef DEBUG_TX_INFO
763 if (ncollisions > 0)
764 printk(KERN_DEBUG
765 "%s: wv_complete(): tx completed after %d collisions.\n",
766 dev->name, ncollisions);
767#endif
768 } else {
769 lp->stats.tx_errors++;
770 if (tx_status & AC_SFLD_S10) {
771 lp->stats.tx_carrier_errors++;
772#ifdef DEBUG_TX_FAIL
773 printk(KERN_DEBUG
774 "%s: wv_complete(): tx error: no CS.\n",
775 dev->name);
776#endif
777 }
778 if (tx_status & AC_SFLD_S9) {
779 lp->stats.tx_carrier_errors++;
780#ifdef DEBUG_TX_FAIL
781 printk(KERN_DEBUG
782 "%s: wv_complete(): tx error: lost CTS.\n",
783 dev->name);
784#endif
785 }
786 if (tx_status & AC_SFLD_S8) {
787 lp->stats.tx_fifo_errors++;
788#ifdef DEBUG_TX_FAIL
789 printk(KERN_DEBUG
790 "%s: wv_complete(): tx error: slow DMA.\n",
791 dev->name);
792#endif
793 }
794 if (tx_status & AC_SFLD_S6) {
795 lp->stats.tx_heartbeat_errors++;
796#ifdef DEBUG_TX_FAIL
797 printk(KERN_DEBUG
798 "%s: wv_complete(): tx error: heart beat.\n",
799 dev->name);
800#endif
801 }
802 if (tx_status & AC_SFLD_S5) {
803 lp->stats.tx_aborted_errors++;
804#ifdef DEBUG_TX_FAIL
805 printk(KERN_DEBUG
806 "%s: wv_complete(): tx error: too many collisions.\n",
807 dev->name);
808#endif
809 }
810 }
811
812#ifdef DEBUG_TX_INFO
813 printk(KERN_DEBUG
814 "%s: wv_complete(): tx completed, tx_status 0x%04x\n",
815 dev->name, tx_status);
816#endif
817 }
818
819#ifdef DEBUG_INTERRUPT_INFO
820 if (nreaped > 1)
821 printk(KERN_DEBUG "%s: wv_complete(): reaped %d\n",
822 dev->name, nreaped);
823#endif
824
825 /*
826 * Inform upper layers.
827 */
828 if (lp->tx_n_in_use < NTXBLOCKS - 1) {
829 netif_wake_queue(dev);
830 }
831#ifdef DEBUG_INTERRUPT_TRACE
832 printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name);
833#endif
834 return nreaped;
835}
836
837/*------------------------------------------------------------------*/
838/*
839 * Reconfigure the i82586, or at least ask for it.
840 * Because wv_82586_config uses a transmission buffer, we must do it
841 * when we are sure that there is one left, so we do it now
842 * or in wavelan_packet_xmit() (I can't find any better place,
843 * wavelan_interrupt is not an option), so you may experience
844 * delays sometimes.
845 */
Arjan van de Ven858119e2006-01-14 13:20:43 -0800846static void wv_82586_reconfig(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700847{
848 net_local *lp = (net_local *) dev->priv;
849 unsigned long flags;
850
851 /* Arm the flag, will be cleard in wv_82586_config() */
852 lp->reconfig_82586 = 1;
853
854 /* Check if we can do it now ! */
855 if((netif_running(dev)) && !(netif_queue_stopped(dev))) {
856 spin_lock_irqsave(&lp->spinlock, flags);
857 /* May fail */
858 wv_82586_config(dev);
859 spin_unlock_irqrestore(&lp->spinlock, flags);
860 }
861 else {
862#ifdef DEBUG_CONFIG_INFO
863 printk(KERN_DEBUG
864 "%s: wv_82586_reconfig(): delayed (state = %lX)\n",
865 dev->name, dev->state);
866#endif
867 }
868}
869
870/********************* DEBUG & INFO SUBROUTINES *********************/
871/*
872 * This routine is used in the code to show information for debugging.
873 * Most of the time, it dumps the contents of hardware structures.
874 */
875
876#ifdef DEBUG_PSA_SHOW
877/*------------------------------------------------------------------*/
878/*
879 * Print the formatted contents of the Parameter Storage Area.
880 */
881static void wv_psa_show(psa_t * p)
882{
883 printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n");
884 printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
885 p->psa_io_base_addr_1,
886 p->psa_io_base_addr_2,
887 p->psa_io_base_addr_3, p->psa_io_base_addr_4);
888 printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
889 p->psa_rem_boot_addr_1,
890 p->psa_rem_boot_addr_2, p->psa_rem_boot_addr_3);
891 printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
892 printk("psa_int_req_no: %d\n", p->psa_int_req_no);
893#ifdef DEBUG_SHOW_UNUSED
894 printk(KERN_DEBUG
895 "psa_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
896 p->psa_unused0[0], p->psa_unused0[1], p->psa_unused0[2],
897 p->psa_unused0[3], p->psa_unused0[4], p->psa_unused0[5],
898 p->psa_unused0[6]);
899#endif /* DEBUG_SHOW_UNUSED */
900 printk(KERN_DEBUG
901 "psa_univ_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
902 p->psa_univ_mac_addr[0], p->psa_univ_mac_addr[1],
903 p->psa_univ_mac_addr[2], p->psa_univ_mac_addr[3],
904 p->psa_univ_mac_addr[4], p->psa_univ_mac_addr[5]);
905 printk(KERN_DEBUG
906 "psa_local_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
907 p->psa_local_mac_addr[0], p->psa_local_mac_addr[1],
908 p->psa_local_mac_addr[2], p->psa_local_mac_addr[3],
909 p->psa_local_mac_addr[4], p->psa_local_mac_addr[5]);
910 printk(KERN_DEBUG "psa_univ_local_sel: %d, ",
911 p->psa_univ_local_sel);
912 printk("psa_comp_number: %d, ", p->psa_comp_number);
913 printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
914 printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
915 p->psa_feature_select);
916 printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
917 printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
918 printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
919 printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0],
920 p->psa_nwid[1]);
921 printk("psa_nwid_select: %d\n", p->psa_nwid_select);
922 printk(KERN_DEBUG "psa_encryption_select: %d, ",
923 p->psa_encryption_select);
924 printk
925 ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
926 p->psa_encryption_key[0], p->psa_encryption_key[1],
927 p->psa_encryption_key[2], p->psa_encryption_key[3],
928 p->psa_encryption_key[4], p->psa_encryption_key[5],
929 p->psa_encryption_key[6], p->psa_encryption_key[7]);
930 printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
931 printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
932 p->psa_call_code[0]);
933 printk
934 ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
935 p->psa_call_code[0], p->psa_call_code[1], p->psa_call_code[2],
936 p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5],
937 p->psa_call_code[6], p->psa_call_code[7]);
938#ifdef DEBUG_SHOW_UNUSED
939 printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n",
940 p->psa_reserved[0],
941 p->psa_reserved[1], p->psa_reserved[2], p->psa_reserved[3]);
942#endif /* DEBUG_SHOW_UNUSED */
943 printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
944 printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
945 printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
946} /* wv_psa_show */
947#endif /* DEBUG_PSA_SHOW */
948
949#ifdef DEBUG_MMC_SHOW
950/*------------------------------------------------------------------*/
951/*
952 * Print the formatted status of the Modem Management Controller.
953 * This function needs to be completed.
954 */
955static void wv_mmc_show(struct net_device * dev)
956{
957 unsigned long ioaddr = dev->base_addr;
958 net_local *lp = (net_local *) dev->priv;
959 mmr_t m;
960
961 /* Basic check */
962 if (hasr_read(ioaddr) & HASR_NO_CLK) {
963 printk(KERN_WARNING
964 "%s: wv_mmc_show: modem not connected\n",
965 dev->name);
966 return;
967 }
968
969 /* Read the mmc */
970 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
971 mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
972 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
973
Linus Torvalds1da177e2005-04-16 15:20:36 -0700974 /* Don't forget to update statistics */
975 lp->wstats.discard.nwid +=
976 (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700977
978 printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n");
979#ifdef DEBUG_SHOW_UNUSED
980 printk(KERN_DEBUG
981 "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
982 m.mmr_unused0[0], m.mmr_unused0[1], m.mmr_unused0[2],
983 m.mmr_unused0[3], m.mmr_unused0[4], m.mmr_unused0[5],
984 m.mmr_unused0[6], m.mmr_unused0[7]);
985#endif /* DEBUG_SHOW_UNUSED */
986 printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
987 m.mmr_des_avail, m.mmr_des_status);
988#ifdef DEBUG_SHOW_UNUSED
989 printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
990 m.mmr_unused1[0],
991 m.mmr_unused1[1],
992 m.mmr_unused1[2], m.mmr_unused1[3], m.mmr_unused1[4]);
993#endif /* DEBUG_SHOW_UNUSED */
994 printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
995 m.mmr_dce_status,
996 (m.
997 mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ?
998 "energy detected," : "",
999 (m.
1000 mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
1001 "loop test indicated," : "",
1002 (m.
1003 mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ?
1004 "transmitter on," : "",
1005 (m.
1006 mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
1007 "jabber timer expired," : "");
1008 printk(KERN_DEBUG "Dsp ID: %02X\n", m.mmr_dsp_id);
1009#ifdef DEBUG_SHOW_UNUSED
1010 printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
1011 m.mmr_unused2[0], m.mmr_unused2[1]);
1012#endif /* DEBUG_SHOW_UNUSED */
1013 printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
1014 (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
1015 (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
1016 printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
1017 m.mmr_thr_pre_set & MMR_THR_PRE_SET,
1018 (m.
1019 mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" :
1020 "below");
1021 printk(KERN_DEBUG "signal_lvl: %d [%s], ",
1022 m.mmr_signal_lvl & MMR_SIGNAL_LVL,
1023 (m.
1024 mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" :
1025 "no new msg");
1026 printk("silence_lvl: %d [%s], ",
1027 m.mmr_silence_lvl & MMR_SILENCE_LVL,
1028 (m.
1029 mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" :
1030 "no new update");
1031 printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
1032 (m.
1033 mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" :
1034 "Antenna 0");
1035#ifdef DEBUG_SHOW_UNUSED
1036 printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
1037#endif /* DEBUG_SHOW_UNUSED */
1038} /* wv_mmc_show */
1039#endif /* DEBUG_MMC_SHOW */
1040
1041#ifdef DEBUG_I82586_SHOW
1042/*------------------------------------------------------------------*/
1043/*
1044 * Print the last block of the i82586 memory.
1045 */
1046static void wv_scb_show(unsigned long ioaddr)
1047{
1048 scb_t scb;
1049
1050 obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
1051 sizeof(scb));
1052
1053 printk(KERN_DEBUG "##### WaveLAN system control block: #####\n");
1054
1055 printk(KERN_DEBUG "status: ");
1056 printk("stat 0x%x[%s%s%s%s] ",
1057 (scb.
1058 scb_status & (SCB_ST_CX | SCB_ST_FR | SCB_ST_CNA |
1059 SCB_ST_RNR)) >> 12,
1060 (scb.
1061 scb_status & SCB_ST_CX) ? "command completion interrupt," :
1062 "", (scb.scb_status & SCB_ST_FR) ? "frame received," : "",
1063 (scb.
1064 scb_status & SCB_ST_CNA) ? "command unit not active," : "",
1065 (scb.
1066 scb_status & SCB_ST_RNR) ? "receiving unit not ready," :
1067 "");
1068 printk("cus 0x%x[%s%s%s] ", (scb.scb_status & SCB_ST_CUS) >> 8,
1069 ((scb.scb_status & SCB_ST_CUS) ==
1070 SCB_ST_CUS_IDLE) ? "idle" : "",
1071 ((scb.scb_status & SCB_ST_CUS) ==
1072 SCB_ST_CUS_SUSP) ? "suspended" : "",
1073 ((scb.scb_status & SCB_ST_CUS) ==
1074 SCB_ST_CUS_ACTV) ? "active" : "");
1075 printk("rus 0x%x[%s%s%s%s]\n", (scb.scb_status & SCB_ST_RUS) >> 4,
1076 ((scb.scb_status & SCB_ST_RUS) ==
1077 SCB_ST_RUS_IDLE) ? "idle" : "",
1078 ((scb.scb_status & SCB_ST_RUS) ==
1079 SCB_ST_RUS_SUSP) ? "suspended" : "",
1080 ((scb.scb_status & SCB_ST_RUS) ==
1081 SCB_ST_RUS_NRES) ? "no resources" : "",
1082 ((scb.scb_status & SCB_ST_RUS) ==
1083 SCB_ST_RUS_RDY) ? "ready" : "");
1084
1085 printk(KERN_DEBUG "command: ");
1086 printk("ack 0x%x[%s%s%s%s] ",
1087 (scb.
1088 scb_command & (SCB_CMD_ACK_CX | SCB_CMD_ACK_FR |
1089 SCB_CMD_ACK_CNA | SCB_CMD_ACK_RNR)) >> 12,
1090 (scb.
1091 scb_command & SCB_CMD_ACK_CX) ? "ack cmd completion," : "",
1092 (scb.
1093 scb_command & SCB_CMD_ACK_FR) ? "ack frame received," : "",
1094 (scb.
1095 scb_command & SCB_CMD_ACK_CNA) ? "ack CU not active," : "",
1096 (scb.
1097 scb_command & SCB_CMD_ACK_RNR) ? "ack RU not ready," : "");
1098 printk("cuc 0x%x[%s%s%s%s%s] ",
1099 (scb.scb_command & SCB_CMD_CUC) >> 8,
1100 ((scb.scb_command & SCB_CMD_CUC) ==
1101 SCB_CMD_CUC_NOP) ? "nop" : "",
1102 ((scb.scb_command & SCB_CMD_CUC) ==
1103 SCB_CMD_CUC_GO) ? "start cbl_offset" : "",
1104 ((scb.scb_command & SCB_CMD_CUC) ==
1105 SCB_CMD_CUC_RES) ? "resume execution" : "",
1106 ((scb.scb_command & SCB_CMD_CUC) ==
1107 SCB_CMD_CUC_SUS) ? "suspend execution" : "",
1108 ((scb.scb_command & SCB_CMD_CUC) ==
1109 SCB_CMD_CUC_ABT) ? "abort execution" : "");
1110 printk("ruc 0x%x[%s%s%s%s%s]\n",
1111 (scb.scb_command & SCB_CMD_RUC) >> 4,
1112 ((scb.scb_command & SCB_CMD_RUC) ==
1113 SCB_CMD_RUC_NOP) ? "nop" : "",
1114 ((scb.scb_command & SCB_CMD_RUC) ==
1115 SCB_CMD_RUC_GO) ? "start rfa_offset" : "",
1116 ((scb.scb_command & SCB_CMD_RUC) ==
1117 SCB_CMD_RUC_RES) ? "resume reception" : "",
1118 ((scb.scb_command & SCB_CMD_RUC) ==
1119 SCB_CMD_RUC_SUS) ? "suspend reception" : "",
1120 ((scb.scb_command & SCB_CMD_RUC) ==
1121 SCB_CMD_RUC_ABT) ? "abort reception" : "");
1122
1123 printk(KERN_DEBUG "cbl_offset 0x%x ", scb.scb_cbl_offset);
1124 printk("rfa_offset 0x%x\n", scb.scb_rfa_offset);
1125
1126 printk(KERN_DEBUG "crcerrs %d ", scb.scb_crcerrs);
1127 printk("alnerrs %d ", scb.scb_alnerrs);
1128 printk("rscerrs %d ", scb.scb_rscerrs);
1129 printk("ovrnerrs %d\n", scb.scb_ovrnerrs);
1130}
1131
1132/*------------------------------------------------------------------*/
1133/*
1134 * Print the formatted status of the i82586's receive unit.
1135 */
1136static void wv_ru_show(struct net_device * dev)
1137{
1138 /* net_local *lp = (net_local *) dev->priv; */
1139
1140 printk(KERN_DEBUG
1141 "##### WaveLAN i82586 receiver unit status: #####\n");
1142 printk(KERN_DEBUG "ru:");
1143 /*
1144 * Not implemented yet
1145 */
1146 printk("\n");
1147} /* wv_ru_show */
1148
1149/*------------------------------------------------------------------*/
1150/*
1151 * Display info about one control block of the i82586 memory.
1152 */
1153static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p)
1154{
1155 unsigned long ioaddr;
1156 ac_tx_t actx;
1157
1158 ioaddr = dev->base_addr;
1159
1160 printk("%d: 0x%x:", i, p);
1161
1162 obram_read(ioaddr, p, (unsigned char *) &actx, sizeof(actx));
1163 printk(" status=0x%x,", actx.tx_h.ac_status);
1164 printk(" command=0x%x,", actx.tx_h.ac_command);
1165
1166 /*
1167 {
1168 tbd_t tbd;
1169
1170 obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd));
1171 printk(" tbd_status=0x%x,", tbd.tbd_status);
1172 }
1173 */
1174
1175 printk("|");
1176}
1177
1178/*------------------------------------------------------------------*/
1179/*
1180 * Print status of the command unit of the i82586.
1181 */
1182static void wv_cu_show(struct net_device * dev)
1183{
1184 net_local *lp = (net_local *) dev->priv;
1185 unsigned int i;
1186 u16 p;
1187
1188 printk(KERN_DEBUG
1189 "##### WaveLAN i82586 command unit status: #####\n");
1190
1191 printk(KERN_DEBUG);
1192 for (i = 0, p = lp->tx_first_in_use; i < NTXBLOCKS; i++) {
1193 wv_cu_show_one(dev, lp, i, p);
1194
1195 p += TXBLOCKZ;
1196 if (p >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
1197 p -= NTXBLOCKS * TXBLOCKZ;
1198 }
1199 printk("\n");
1200}
1201#endif /* DEBUG_I82586_SHOW */
1202
1203#ifdef DEBUG_DEVICE_SHOW
1204/*------------------------------------------------------------------*/
1205/*
1206 * Print the formatted status of the WaveLAN PCMCIA device driver.
1207 */
1208static void wv_dev_show(struct net_device * dev)
1209{
1210 printk(KERN_DEBUG "dev:");
1211 printk(" state=%lX,", dev->state);
1212 printk(" trans_start=%ld,", dev->trans_start);
1213 printk(" flags=0x%x,", dev->flags);
1214 printk("\n");
1215} /* wv_dev_show */
1216
1217/*------------------------------------------------------------------*/
1218/*
1219 * Print the formatted status of the WaveLAN PCMCIA device driver's
1220 * private information.
1221 */
1222static void wv_local_show(struct net_device * dev)
1223{
1224 net_local *lp;
1225
1226 lp = (net_local *) dev->priv;
1227
1228 printk(KERN_DEBUG "local:");
1229 printk(" tx_n_in_use=%d,", lp->tx_n_in_use);
1230 printk(" hacr=0x%x,", lp->hacr);
1231 printk(" rx_head=0x%x,", lp->rx_head);
1232 printk(" rx_last=0x%x,", lp->rx_last);
1233 printk(" tx_first_free=0x%x,", lp->tx_first_free);
1234 printk(" tx_first_in_use=0x%x,", lp->tx_first_in_use);
1235 printk("\n");
1236} /* wv_local_show */
1237#endif /* DEBUG_DEVICE_SHOW */
1238
1239#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
1240/*------------------------------------------------------------------*/
1241/*
1242 * Dump packet header (and content if necessary) on the screen
1243 */
1244static inline void wv_packet_info(u8 * p, /* Packet to dump */
1245 int length, /* Length of the packet */
1246 char *msg1, /* Name of the device */
1247 char *msg2)
1248{ /* Name of the function */
1249 int i;
1250 int maxi;
1251
1252 printk(KERN_DEBUG
1253 "%s: %s(): dest %02X:%02X:%02X:%02X:%02X:%02X, length %d\n",
1254 msg1, msg2, p[0], p[1], p[2], p[3], p[4], p[5], length);
1255 printk(KERN_DEBUG
1256 "%s: %s(): src %02X:%02X:%02X:%02X:%02X:%02X, type 0x%02X%02X\n",
1257 msg1, msg2, p[6], p[7], p[8], p[9], p[10], p[11], p[12],
1258 p[13]);
1259
1260#ifdef DEBUG_PACKET_DUMP
1261
1262 printk(KERN_DEBUG "data=\"");
1263
1264 if ((maxi = length) > DEBUG_PACKET_DUMP)
1265 maxi = DEBUG_PACKET_DUMP;
1266 for (i = 14; i < maxi; i++)
1267 if (p[i] >= ' ' && p[i] <= '~')
1268 printk(" %c", p[i]);
1269 else
1270 printk("%02X", p[i]);
1271 if (maxi < length)
1272 printk("..");
1273 printk("\"\n");
1274 printk(KERN_DEBUG "\n");
1275#endif /* DEBUG_PACKET_DUMP */
1276}
1277#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
1278
1279/*------------------------------------------------------------------*/
1280/*
1281 * This is the information which is displayed by the driver at startup.
1282 * There are lots of flags for configuring it to your liking.
1283 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001284static void wv_init_info(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001285{
1286 short ioaddr = dev->base_addr;
1287 net_local *lp = (net_local *) dev->priv;
1288 psa_t psa;
1289 int i;
1290
1291 /* Read the parameter storage area */
1292 psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
1293
1294#ifdef DEBUG_PSA_SHOW
1295 wv_psa_show(&psa);
1296#endif
1297#ifdef DEBUG_MMC_SHOW
1298 wv_mmc_show(dev);
1299#endif
1300#ifdef DEBUG_I82586_SHOW
1301 wv_cu_show(dev);
1302#endif
1303
1304#ifdef DEBUG_BASIC_SHOW
1305 /* Now, let's go for the basic stuff. */
1306 printk(KERN_NOTICE "%s: WaveLAN at %#x,", dev->name, ioaddr);
1307 for (i = 0; i < WAVELAN_ADDR_SIZE; i++)
1308 printk("%s%02X", (i == 0) ? " " : ":", dev->dev_addr[i]);
1309 printk(", IRQ %d", dev->irq);
1310
1311 /* Print current network ID. */
1312 if (psa.psa_nwid_select)
1313 printk(", nwid 0x%02X-%02X", psa.psa_nwid[0],
1314 psa.psa_nwid[1]);
1315 else
1316 printk(", nwid off");
1317
1318 /* If 2.00 card */
1319 if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
1320 (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
1321 unsigned short freq;
1322
1323 /* Ask the EEPROM to read the frequency from the first area. */
1324 fee_read(ioaddr, 0x00, &freq, 1);
1325
1326 /* Print frequency */
1327 printk(", 2.00, %ld", (freq >> 6) + 2400L);
1328
1329 /* Hack! */
1330 if (freq & 0x20)
1331 printk(".5");
1332 } else {
1333 printk(", PC");
1334 switch (psa.psa_comp_number) {
1335 case PSA_COMP_PC_AT_915:
1336 case PSA_COMP_PC_AT_2400:
1337 printk("-AT");
1338 break;
1339 case PSA_COMP_PC_MC_915:
1340 case PSA_COMP_PC_MC_2400:
1341 printk("-MC");
1342 break;
1343 case PSA_COMP_PCMCIA_915:
1344 printk("MCIA");
1345 break;
1346 default:
1347 printk("?");
1348 }
1349 printk(", ");
1350 switch (psa.psa_subband) {
1351 case PSA_SUBBAND_915:
1352 printk("915");
1353 break;
1354 case PSA_SUBBAND_2425:
1355 printk("2425");
1356 break;
1357 case PSA_SUBBAND_2460:
1358 printk("2460");
1359 break;
1360 case PSA_SUBBAND_2484:
1361 printk("2484");
1362 break;
1363 case PSA_SUBBAND_2430_5:
1364 printk("2430.5");
1365 break;
1366 default:
1367 printk("?");
1368 }
1369 }
1370
1371 printk(" MHz\n");
1372#endif /* DEBUG_BASIC_SHOW */
1373
1374#ifdef DEBUG_VERSION_SHOW
1375 /* Print version information */
1376 printk(KERN_NOTICE "%s", version);
1377#endif
1378} /* wv_init_info */
1379
1380/********************* IOCTL, STATS & RECONFIG *********************/
1381/*
1382 * We found here routines that are called by Linux on different
1383 * occasions after the configuration and not for transmitting data
1384 * These may be called when the user use ifconfig, /proc/net/dev
1385 * or wireless extensions
1386 */
1387
1388/*------------------------------------------------------------------*/
1389/*
1390 * Get the current Ethernet statistics. This may be called with the
1391 * card open or closed.
1392 * Used when the user read /proc/net/dev
1393 */
1394static en_stats *wavelan_get_stats(struct net_device * dev)
1395{
1396#ifdef DEBUG_IOCTL_TRACE
1397 printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
1398#endif
1399
1400 return (&((net_local *) dev->priv)->stats);
1401}
1402
1403/*------------------------------------------------------------------*/
1404/*
1405 * Set or clear the multicast filter for this adaptor.
1406 * num_addrs == -1 Promiscuous mode, receive all packets
1407 * num_addrs == 0 Normal mode, clear multicast list
1408 * num_addrs > 0 Multicast mode, receive normal and MC packets,
1409 * and do best-effort filtering.
1410 */
1411static void wavelan_set_multicast_list(struct net_device * dev)
1412{
1413 net_local *lp = (net_local *) dev->priv;
1414
1415#ifdef DEBUG_IOCTL_TRACE
1416 printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n",
1417 dev->name);
1418#endif
1419
1420#ifdef DEBUG_IOCTL_INFO
1421 printk(KERN_DEBUG
1422 "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
1423 dev->name, dev->flags, dev->mc_count);
1424#endif
1425
1426 /* Are we asking for promiscuous mode,
1427 * or all multicast addresses (we don't have that!)
1428 * or too many multicast addresses for the hardware filter? */
1429 if ((dev->flags & IFF_PROMISC) ||
1430 (dev->flags & IFF_ALLMULTI) ||
1431 (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) {
1432 /*
1433 * Enable promiscuous mode: receive all packets.
1434 */
1435 if (!lp->promiscuous) {
1436 lp->promiscuous = 1;
1437 lp->mc_count = 0;
1438
1439 wv_82586_reconfig(dev);
1440
1441 /* Tell the kernel that we are doing a really bad job. */
1442 dev->flags |= IFF_PROMISC;
1443 }
1444 } else
1445 /* Are there multicast addresses to send? */
1446 if (dev->mc_list != (struct dev_mc_list *) NULL) {
1447 /*
1448 * Disable promiscuous mode, but receive all packets
1449 * in multicast list
1450 */
1451#ifdef MULTICAST_AVOID
1452 if (lp->promiscuous || (dev->mc_count != lp->mc_count))
1453#endif
1454 {
1455 lp->promiscuous = 0;
1456 lp->mc_count = dev->mc_count;
1457
1458 wv_82586_reconfig(dev);
1459 }
1460 } else {
1461 /*
1462 * Switch to normal mode: disable promiscuous mode and
1463 * clear the multicast list.
1464 */
1465 if (lp->promiscuous || lp->mc_count == 0) {
1466 lp->promiscuous = 0;
1467 lp->mc_count = 0;
1468
1469 wv_82586_reconfig(dev);
1470 }
1471 }
1472#ifdef DEBUG_IOCTL_TRACE
1473 printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n",
1474 dev->name);
1475#endif
1476}
1477
1478/*------------------------------------------------------------------*/
1479/*
1480 * This function doesn't exist.
1481 * (Note : it was a nice way to test the reconfigure stuff...)
1482 */
1483#ifdef SET_MAC_ADDRESS
1484static int wavelan_set_mac_address(struct net_device * dev, void *addr)
1485{
1486 struct sockaddr *mac = addr;
1487
1488 /* Copy the address. */
1489 memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
1490
1491 /* Reconfigure the beast. */
1492 wv_82586_reconfig(dev);
1493
1494 return 0;
1495}
1496#endif /* SET_MAC_ADDRESS */
1497
Linus Torvalds1da177e2005-04-16 15:20:36 -07001498
1499/*------------------------------------------------------------------*/
1500/*
1501 * Frequency setting (for hardware capable of it)
1502 * It's a bit complicated and you don't really want to look into it.
1503 * (called in wavelan_ioctl)
1504 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001505static int wv_set_frequency(unsigned long ioaddr, /* I/O port of the card */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001506 iw_freq * frequency)
1507{
1508 const int BAND_NUM = 10; /* Number of bands */
1509 long freq = 0L; /* offset to 2.4 GHz in .5 MHz */
1510#ifdef DEBUG_IOCTL_INFO
1511 int i;
1512#endif
1513
1514 /* Setting by frequency */
1515 /* Theoretically, you may set any frequency between
1516 * the two limits with a 0.5 MHz precision. In practice,
1517 * I don't want you to have trouble with local regulations.
1518 */
1519 if ((frequency->e == 1) &&
1520 (frequency->m >= (int) 2.412e8)
1521 && (frequency->m <= (int) 2.487e8)) {
1522 freq = ((frequency->m / 10000) - 24000L) / 5;
1523 }
1524
1525 /* Setting by channel (same as wfreqsel) */
1526 /* Warning: each channel is 22 MHz wide, so some of the channels
1527 * will interfere. */
1528 if ((frequency->e == 0) && (frequency->m < BAND_NUM)) {
1529 /* Get frequency offset. */
1530 freq = channel_bands[frequency->m] >> 1;
1531 }
1532
1533 /* Verify that the frequency is allowed. */
1534 if (freq != 0L) {
1535 u16 table[10]; /* Authorized frequency table */
1536
1537 /* Read the frequency table. */
1538 fee_read(ioaddr, 0x71, table, 10);
1539
1540#ifdef DEBUG_IOCTL_INFO
1541 printk(KERN_DEBUG "Frequency table: ");
1542 for (i = 0; i < 10; i++) {
1543 printk(" %04X", table[i]);
1544 }
1545 printk("\n");
1546#endif
1547
1548 /* Look in the table to see whether the frequency is allowed. */
1549 if (!(table[9 - ((freq - 24) / 16)] &
1550 (1 << ((freq - 24) % 16)))) return -EINVAL; /* not allowed */
1551 } else
1552 return -EINVAL;
1553
1554 /* if we get a usable frequency */
1555 if (freq != 0L) {
1556 unsigned short area[16];
1557 unsigned short dac[2];
1558 unsigned short area_verify[16];
1559 unsigned short dac_verify[2];
1560 /* Corresponding gain (in the power adjust value table)
1561 * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8
1562 * and WCIN062D.DOC, page 6.2.9. */
1563 unsigned short power_limit[] = { 40, 80, 120, 160, 0 };
1564 int power_band = 0; /* Selected band */
1565 unsigned short power_adjust; /* Correct value */
1566
1567 /* Search for the gain. */
1568 power_band = 0;
1569 while ((freq > power_limit[power_band]) &&
1570 (power_limit[++power_band] != 0));
1571
1572 /* Read the first area. */
1573 fee_read(ioaddr, 0x00, area, 16);
1574
1575 /* Read the DAC. */
1576 fee_read(ioaddr, 0x60, dac, 2);
1577
1578 /* Read the new power adjust value. */
1579 fee_read(ioaddr, 0x6B - (power_band >> 1), &power_adjust,
1580 1);
1581 if (power_band & 0x1)
1582 power_adjust >>= 8;
1583 else
1584 power_adjust &= 0xFF;
1585
1586#ifdef DEBUG_IOCTL_INFO
1587 printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
1588 for (i = 0; i < 16; i++) {
1589 printk(" %04X", area[i]);
1590 }
1591 printk("\n");
1592
1593 printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n",
1594 dac[0], dac[1]);
1595#endif
1596
1597 /* Frequency offset (for info only) */
1598 area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
1599
1600 /* Receiver Principle main divider coefficient */
1601 area[3] = (freq >> 1) + 2400L - 352L;
1602 area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
1603
1604 /* Transmitter Main divider coefficient */
1605 area[13] = (freq >> 1) + 2400L;
1606 area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
1607
1608 /* Other parts of the area are flags, bit streams or unused. */
1609
1610 /* Set the value in the DAC. */
1611 dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
1612 dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
1613
1614 /* Write the first area. */
1615 fee_write(ioaddr, 0x00, area, 16);
1616
1617 /* Write the DAC. */
1618 fee_write(ioaddr, 0x60, dac, 2);
1619
1620 /* We now should verify here that the writing of the EEPROM went OK. */
1621
1622 /* Reread the first area. */
1623 fee_read(ioaddr, 0x00, area_verify, 16);
1624
1625 /* Reread the DAC. */
1626 fee_read(ioaddr, 0x60, dac_verify, 2);
1627
1628 /* Compare. */
1629 if (memcmp(area, area_verify, 16 * 2) ||
1630 memcmp(dac, dac_verify, 2 * 2)) {
1631#ifdef DEBUG_IOCTL_ERROR
1632 printk(KERN_INFO
1633 "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n");
1634#endif
1635 return -EOPNOTSUPP;
1636 }
1637
1638 /* We must download the frequency parameters to the
1639 * synthesizers (from the EEPROM - area 1)
1640 * Note: as the EEPROM is automatically decremented, we set the end
1641 * if the area... */
1642 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x0F);
1643 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
1644 MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
1645
1646 /* Wait until the download is finished. */
1647 fee_wait(ioaddr, 100, 100);
1648
1649 /* We must now download the power adjust value (gain) to
1650 * the synthesizers (from the EEPROM - area 7 - DAC). */
1651 mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x61);
1652 mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
1653 MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
1654
1655 /* Wait for the download to finish. */
1656 fee_wait(ioaddr, 100, 100);
1657
1658#ifdef DEBUG_IOCTL_INFO
1659 /* Verification of what we have done */
1660
1661 printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
1662 for (i = 0; i < 16; i++) {
1663 printk(" %04X", area_verify[i]);
1664 }
1665 printk("\n");
1666
1667 printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n",
1668 dac_verify[0], dac_verify[1]);
1669#endif
1670
1671 return 0;
1672 } else
1673 return -EINVAL; /* Bah, never get there... */
1674}
1675
1676/*------------------------------------------------------------------*/
1677/*
1678 * Give the list of available frequencies.
1679 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001680static int wv_frequency_list(unsigned long ioaddr, /* I/O port of the card */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001681 iw_freq * list, /* List of frequencies to fill */
1682 int max)
1683{ /* Maximum number of frequencies */
1684 u16 table[10]; /* Authorized frequency table */
1685 long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */
1686 int i; /* index in the table */
1687 int c = 0; /* Channel number */
1688
1689 /* Read the frequency table. */
1690 fee_read(ioaddr, 0x71 /* frequency table */ , table, 10);
1691
1692 /* Check all frequencies. */
1693 i = 0;
1694 for (freq = 0; freq < 150; freq++)
1695 /* Look in the table if the frequency is allowed */
1696 if (table[9 - (freq / 16)] & (1 << (freq % 16))) {
1697 /* Compute approximate channel number */
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +02001698 while ((c < ARRAY_SIZE(channel_bands)) &&
Eric Sesterhenna1924912006-06-21 16:40:24 +02001699 (((channel_bands[c] >> 1) - 24) < freq))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001700 c++;
1701 list[i].i = c; /* Set the list index */
1702
1703 /* put in the list */
1704 list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
1705 list[i++].e = 1;
1706
1707 /* Check number. */
1708 if (i >= max)
1709 return (i);
1710 }
1711
1712 return (i);
1713}
1714
1715#ifdef IW_WIRELESS_SPY
1716/*------------------------------------------------------------------*/
1717/*
1718 * Gather wireless spy statistics: for each packet, compare the source
1719 * address with our list, and if they match, get the statistics.
1720 * Sorry, but this function really needs the wireless extensions.
1721 */
1722static inline void wl_spy_gather(struct net_device * dev,
1723 u8 * mac, /* MAC address */
1724 u8 * stats) /* Statistics to gather */
1725{
1726 struct iw_quality wstats;
1727
1728 wstats.qual = stats[2] & MMR_SGNL_QUAL;
1729 wstats.level = stats[0] & MMR_SIGNAL_LVL;
1730 wstats.noise = stats[1] & MMR_SILENCE_LVL;
1731 wstats.updated = 0x7;
1732
1733 /* Update spy records */
1734 wireless_spy_update(dev, mac, &wstats);
1735}
1736#endif /* IW_WIRELESS_SPY */
1737
1738#ifdef HISTOGRAM
1739/*------------------------------------------------------------------*/
1740/*
1741 * This function calculates a histogram of the signal level.
1742 * As the noise is quite constant, it's like doing it on the SNR.
1743 * We have defined a set of interval (lp->his_range), and each time
1744 * the level goes in that interval, we increment the count (lp->his_sum).
1745 * With this histogram you may detect if one WaveLAN is really weak,
1746 * or you may also calculate the mean and standard deviation of the level.
1747 */
1748static inline void wl_his_gather(struct net_device * dev, u8 * stats)
1749{ /* Statistics to gather */
1750 net_local *lp = (net_local *) dev->priv;
1751 u8 level = stats[0] & MMR_SIGNAL_LVL;
1752 int i;
1753
1754 /* Find the correct interval. */
1755 i = 0;
1756 while ((i < (lp->his_number - 1))
1757 && (level >= lp->his_range[i++]));
1758
1759 /* Increment interval counter. */
1760 (lp->his_sum[i])++;
1761}
1762#endif /* HISTOGRAM */
1763
1764/*------------------------------------------------------------------*/
1765/*
1766 * Wireless Handler : get protocol name
1767 */
1768static int wavelan_get_name(struct net_device *dev,
1769 struct iw_request_info *info,
1770 union iwreq_data *wrqu,
1771 char *extra)
1772{
1773 strcpy(wrqu->name, "WaveLAN");
1774 return 0;
1775}
1776
1777/*------------------------------------------------------------------*/
1778/*
1779 * Wireless Handler : set NWID
1780 */
1781static int wavelan_set_nwid(struct net_device *dev,
1782 struct iw_request_info *info,
1783 union iwreq_data *wrqu,
1784 char *extra)
1785{
1786 unsigned long ioaddr = dev->base_addr;
1787 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1788 psa_t psa;
1789 mm_t m;
1790 unsigned long flags;
1791 int ret = 0;
1792
1793 /* Disable interrupts and save flags. */
1794 spin_lock_irqsave(&lp->spinlock, flags);
1795
1796 /* Set NWID in WaveLAN. */
1797 if (!wrqu->nwid.disabled) {
1798 /* Set NWID in psa */
1799 psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
1800 psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
1801 psa.psa_nwid_select = 0x01;
1802 psa_write(ioaddr, lp->hacr,
1803 (char *) psa.psa_nwid - (char *) &psa,
1804 (unsigned char *) psa.psa_nwid, 3);
1805
1806 /* Set NWID in mmc. */
1807 m.w.mmw_netw_id_l = psa.psa_nwid[1];
1808 m.w.mmw_netw_id_h = psa.psa_nwid[0];
1809 mmc_write(ioaddr,
1810 (char *) &m.w.mmw_netw_id_l -
1811 (char *) &m,
1812 (unsigned char *) &m.w.mmw_netw_id_l, 2);
1813 mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), 0x00);
1814 } else {
1815 /* Disable NWID in the psa. */
1816 psa.psa_nwid_select = 0x00;
1817 psa_write(ioaddr, lp->hacr,
1818 (char *) &psa.psa_nwid_select -
1819 (char *) &psa,
1820 (unsigned char *) &psa.psa_nwid_select,
1821 1);
1822
1823 /* Disable NWID in the mmc (no filtering). */
1824 mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel),
1825 MMW_LOOPT_SEL_DIS_NWID);
1826 }
1827 /* update the Wavelan checksum */
1828 update_psa_checksum(dev, ioaddr, lp->hacr);
1829
1830 /* Enable interrupts and restore flags. */
1831 spin_unlock_irqrestore(&lp->spinlock, flags);
1832
1833 return ret;
1834}
1835
1836/*------------------------------------------------------------------*/
1837/*
1838 * Wireless Handler : get NWID
1839 */
1840static int wavelan_get_nwid(struct net_device *dev,
1841 struct iw_request_info *info,
1842 union iwreq_data *wrqu,
1843 char *extra)
1844{
1845 unsigned long ioaddr = dev->base_addr;
1846 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1847 psa_t psa;
1848 unsigned long flags;
1849 int ret = 0;
1850
1851 /* Disable interrupts and save flags. */
1852 spin_lock_irqsave(&lp->spinlock, flags);
1853
1854 /* Read the NWID. */
1855 psa_read(ioaddr, lp->hacr,
1856 (char *) psa.psa_nwid - (char *) &psa,
1857 (unsigned char *) psa.psa_nwid, 3);
1858 wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
1859 wrqu->nwid.disabled = !(psa.psa_nwid_select);
1860 wrqu->nwid.fixed = 1; /* Superfluous */
1861
1862 /* Enable interrupts and restore flags. */
1863 spin_unlock_irqrestore(&lp->spinlock, flags);
1864
1865 return ret;
1866}
1867
1868/*------------------------------------------------------------------*/
1869/*
1870 * Wireless Handler : set frequency
1871 */
1872static int wavelan_set_freq(struct net_device *dev,
1873 struct iw_request_info *info,
1874 union iwreq_data *wrqu,
1875 char *extra)
1876{
1877 unsigned long ioaddr = dev->base_addr;
1878 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1879 unsigned long flags;
1880 int ret;
1881
1882 /* Disable interrupts and save flags. */
1883 spin_lock_irqsave(&lp->spinlock, flags);
1884
1885 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
1886 if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
1887 (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
1888 ret = wv_set_frequency(ioaddr, &(wrqu->freq));
1889 else
1890 ret = -EOPNOTSUPP;
1891
1892 /* Enable interrupts and restore flags. */
1893 spin_unlock_irqrestore(&lp->spinlock, flags);
1894
1895 return ret;
1896}
1897
1898/*------------------------------------------------------------------*/
1899/*
1900 * Wireless Handler : get frequency
1901 */
1902static int wavelan_get_freq(struct net_device *dev,
1903 struct iw_request_info *info,
1904 union iwreq_data *wrqu,
1905 char *extra)
1906{
1907 unsigned long ioaddr = dev->base_addr;
1908 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1909 psa_t psa;
1910 unsigned long flags;
1911 int ret = 0;
1912
1913 /* Disable interrupts and save flags. */
1914 spin_lock_irqsave(&lp->spinlock, flags);
1915
1916 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
1917 * Does it work for everybody, especially old cards? */
1918 if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
1919 (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
1920 unsigned short freq;
1921
1922 /* Ask the EEPROM to read the frequency from the first area. */
1923 fee_read(ioaddr, 0x00, &freq, 1);
1924 wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
1925 wrqu->freq.e = 1;
1926 } else {
1927 psa_read(ioaddr, lp->hacr,
1928 (char *) &psa.psa_subband - (char *) &psa,
1929 (unsigned char *) &psa.psa_subband, 1);
1930
1931 if (psa.psa_subband <= 4) {
1932 wrqu->freq.m = fixed_bands[psa.psa_subband];
1933 wrqu->freq.e = (psa.psa_subband != 0);
1934 } else
1935 ret = -EOPNOTSUPP;
1936 }
1937
1938 /* Enable interrupts and restore flags. */
1939 spin_unlock_irqrestore(&lp->spinlock, flags);
1940
1941 return ret;
1942}
1943
1944/*------------------------------------------------------------------*/
1945/*
1946 * Wireless Handler : set level threshold
1947 */
1948static int wavelan_set_sens(struct net_device *dev,
1949 struct iw_request_info *info,
1950 union iwreq_data *wrqu,
1951 char *extra)
1952{
1953 unsigned long ioaddr = dev->base_addr;
1954 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1955 psa_t psa;
1956 unsigned long flags;
1957 int ret = 0;
1958
1959 /* Disable interrupts and save flags. */
1960 spin_lock_irqsave(&lp->spinlock, flags);
1961
1962 /* Set the level threshold. */
1963 /* We should complain loudly if wrqu->sens.fixed = 0, because we
1964 * can't set auto mode... */
1965 psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
1966 psa_write(ioaddr, lp->hacr,
1967 (char *) &psa.psa_thr_pre_set - (char *) &psa,
1968 (unsigned char *) &psa.psa_thr_pre_set, 1);
1969 /* update the Wavelan checksum */
1970 update_psa_checksum(dev, ioaddr, lp->hacr);
1971 mmc_out(ioaddr, mmwoff(0, mmw_thr_pre_set),
1972 psa.psa_thr_pre_set);
1973
1974 /* Enable interrupts and restore flags. */
1975 spin_unlock_irqrestore(&lp->spinlock, flags);
1976
1977 return ret;
1978}
1979
1980/*------------------------------------------------------------------*/
1981/*
1982 * Wireless Handler : get level threshold
1983 */
1984static int wavelan_get_sens(struct net_device *dev,
1985 struct iw_request_info *info,
1986 union iwreq_data *wrqu,
1987 char *extra)
1988{
1989 unsigned long ioaddr = dev->base_addr;
1990 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
1991 psa_t psa;
1992 unsigned long flags;
1993 int ret = 0;
1994
1995 /* Disable interrupts and save flags. */
1996 spin_lock_irqsave(&lp->spinlock, flags);
1997
1998 /* Read the level threshold. */
1999 psa_read(ioaddr, lp->hacr,
2000 (char *) &psa.psa_thr_pre_set - (char *) &psa,
2001 (unsigned char *) &psa.psa_thr_pre_set, 1);
2002 wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
2003 wrqu->sens.fixed = 1;
2004
2005 /* Enable interrupts and restore flags. */
2006 spin_unlock_irqrestore(&lp->spinlock, flags);
2007
2008 return ret;
2009}
2010
2011/*------------------------------------------------------------------*/
2012/*
2013 * Wireless Handler : set encryption key
2014 */
2015static int wavelan_set_encode(struct net_device *dev,
2016 struct iw_request_info *info,
2017 union iwreq_data *wrqu,
2018 char *extra)
2019{
2020 unsigned long ioaddr = dev->base_addr;
2021 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2022 unsigned long flags;
2023 psa_t psa;
2024 int ret = 0;
2025
2026 /* Disable interrupts and save flags. */
2027 spin_lock_irqsave(&lp->spinlock, flags);
2028
2029 /* Check if capable of encryption */
2030 if (!mmc_encr(ioaddr)) {
2031 ret = -EOPNOTSUPP;
2032 }
2033
2034 /* Check the size of the key */
2035 if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
2036 ret = -EINVAL;
2037 }
2038
2039 if(!ret) {
2040 /* Basic checking... */
2041 if (wrqu->encoding.length == 8) {
2042 /* Copy the key in the driver */
2043 memcpy(psa.psa_encryption_key, extra,
2044 wrqu->encoding.length);
2045 psa.psa_encryption_select = 1;
2046
2047 psa_write(ioaddr, lp->hacr,
2048 (char *) &psa.psa_encryption_select -
2049 (char *) &psa,
2050 (unsigned char *) &psa.
2051 psa_encryption_select, 8 + 1);
2052
2053 mmc_out(ioaddr, mmwoff(0, mmw_encr_enable),
2054 MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
2055 mmc_write(ioaddr, mmwoff(0, mmw_encr_key),
2056 (unsigned char *) &psa.
2057 psa_encryption_key, 8);
2058 }
2059
2060 /* disable encryption */
2061 if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
2062 psa.psa_encryption_select = 0;
2063 psa_write(ioaddr, lp->hacr,
2064 (char *) &psa.psa_encryption_select -
2065 (char *) &psa,
2066 (unsigned char *) &psa.
2067 psa_encryption_select, 1);
2068
2069 mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), 0);
2070 }
2071 /* update the Wavelan checksum */
2072 update_psa_checksum(dev, ioaddr, lp->hacr);
2073 }
2074
2075 /* Enable interrupts and restore flags. */
2076 spin_unlock_irqrestore(&lp->spinlock, flags);
2077
2078 return ret;
2079}
2080
2081/*------------------------------------------------------------------*/
2082/*
2083 * Wireless Handler : get encryption key
2084 */
2085static int wavelan_get_encode(struct net_device *dev,
2086 struct iw_request_info *info,
2087 union iwreq_data *wrqu,
2088 char *extra)
2089{
2090 unsigned long ioaddr = dev->base_addr;
2091 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2092 psa_t psa;
2093 unsigned long flags;
2094 int ret = 0;
2095
2096 /* Disable interrupts and save flags. */
2097 spin_lock_irqsave(&lp->spinlock, flags);
2098
2099 /* Check if encryption is available */
2100 if (!mmc_encr(ioaddr)) {
2101 ret = -EOPNOTSUPP;
2102 } else {
2103 /* Read the encryption key */
2104 psa_read(ioaddr, lp->hacr,
2105 (char *) &psa.psa_encryption_select -
2106 (char *) &psa,
2107 (unsigned char *) &psa.
2108 psa_encryption_select, 1 + 8);
2109
2110 /* encryption is enabled ? */
2111 if (psa.psa_encryption_select)
2112 wrqu->encoding.flags = IW_ENCODE_ENABLED;
2113 else
2114 wrqu->encoding.flags = IW_ENCODE_DISABLED;
2115 wrqu->encoding.flags |= mmc_encr(ioaddr);
2116
2117 /* Copy the key to the user buffer */
2118 wrqu->encoding.length = 8;
2119 memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
2120 }
2121
2122 /* Enable interrupts and restore flags. */
2123 spin_unlock_irqrestore(&lp->spinlock, flags);
2124
2125 return ret;
2126}
2127
2128/*------------------------------------------------------------------*/
2129/*
2130 * Wireless Handler : get range info
2131 */
2132static int wavelan_get_range(struct net_device *dev,
2133 struct iw_request_info *info,
2134 union iwreq_data *wrqu,
2135 char *extra)
2136{
2137 unsigned long ioaddr = dev->base_addr;
2138 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2139 struct iw_range *range = (struct iw_range *) extra;
2140 unsigned long flags;
2141 int ret = 0;
2142
2143 /* Set the length (very important for backward compatibility) */
2144 wrqu->data.length = sizeof(struct iw_range);
2145
2146 /* Set all the info we don't care or don't know about to zero */
2147 memset(range, 0, sizeof(struct iw_range));
2148
2149 /* Set the Wireless Extension versions */
2150 range->we_version_compiled = WIRELESS_EXT;
2151 range->we_version_source = 9;
2152
2153 /* Set information in the range struct. */
2154 range->throughput = 1.6 * 1000 * 1000; /* don't argue on this ! */
2155 range->min_nwid = 0x0000;
2156 range->max_nwid = 0xFFFF;
2157
2158 range->sensitivity = 0x3F;
2159 range->max_qual.qual = MMR_SGNL_QUAL;
2160 range->max_qual.level = MMR_SIGNAL_LVL;
2161 range->max_qual.noise = MMR_SILENCE_LVL;
2162 range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
2163 /* Need to get better values for those two */
2164 range->avg_qual.level = 30;
2165 range->avg_qual.noise = 8;
2166
2167 range->num_bitrates = 1;
2168 range->bitrate[0] = 2000000; /* 2 Mb/s */
2169
2170 /* Event capability (kernel + driver) */
2171 range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
2172 IW_EVENT_CAPA_MASK(0x8B04));
2173 range->event_capa[1] = IW_EVENT_CAPA_K_1;
2174
2175 /* Disable interrupts and save flags. */
2176 spin_lock_irqsave(&lp->spinlock, flags);
2177
2178 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
2179 if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
2180 (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
2181 range->num_channels = 10;
2182 range->num_frequency = wv_frequency_list(ioaddr, range->freq,
2183 IW_MAX_FREQUENCIES);
2184 } else
2185 range->num_channels = range->num_frequency = 0;
2186
2187 /* Encryption supported ? */
2188 if (mmc_encr(ioaddr)) {
2189 range->encoding_size[0] = 8; /* DES = 64 bits key */
2190 range->num_encoding_sizes = 1;
2191 range->max_encoding_tokens = 1; /* Only one key possible */
2192 } else {
2193 range->num_encoding_sizes = 0;
2194 range->max_encoding_tokens = 0;
2195 }
2196
2197 /* Enable interrupts and restore flags. */
2198 spin_unlock_irqrestore(&lp->spinlock, flags);
2199
2200 return ret;
2201}
2202
2203/*------------------------------------------------------------------*/
2204/*
2205 * Wireless Private Handler : set quality threshold
2206 */
2207static int wavelan_set_qthr(struct net_device *dev,
2208 struct iw_request_info *info,
2209 union iwreq_data *wrqu,
2210 char *extra)
2211{
2212 unsigned long ioaddr = dev->base_addr;
2213 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2214 psa_t psa;
2215 unsigned long flags;
2216
2217 /* Disable interrupts and save flags. */
2218 spin_lock_irqsave(&lp->spinlock, flags);
2219
2220 psa.psa_quality_thr = *(extra) & 0x0F;
2221 psa_write(ioaddr, lp->hacr,
2222 (char *) &psa.psa_quality_thr - (char *) &psa,
2223 (unsigned char *) &psa.psa_quality_thr, 1);
2224 /* update the Wavelan checksum */
2225 update_psa_checksum(dev, ioaddr, lp->hacr);
2226 mmc_out(ioaddr, mmwoff(0, mmw_quality_thr),
2227 psa.psa_quality_thr);
2228
2229 /* Enable interrupts and restore flags. */
2230 spin_unlock_irqrestore(&lp->spinlock, flags);
2231
2232 return 0;
2233}
2234
2235/*------------------------------------------------------------------*/
2236/*
2237 * Wireless Private Handler : get quality threshold
2238 */
2239static int wavelan_get_qthr(struct net_device *dev,
2240 struct iw_request_info *info,
2241 union iwreq_data *wrqu,
2242 char *extra)
2243{
2244 unsigned long ioaddr = dev->base_addr;
2245 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2246 psa_t psa;
2247 unsigned long flags;
2248
2249 /* Disable interrupts and save flags. */
2250 spin_lock_irqsave(&lp->spinlock, flags);
2251
2252 psa_read(ioaddr, lp->hacr,
2253 (char *) &psa.psa_quality_thr - (char *) &psa,
2254 (unsigned char *) &psa.psa_quality_thr, 1);
2255 *(extra) = psa.psa_quality_thr & 0x0F;
2256
2257 /* Enable interrupts and restore flags. */
2258 spin_unlock_irqrestore(&lp->spinlock, flags);
2259
2260 return 0;
2261}
2262
2263#ifdef HISTOGRAM
2264/*------------------------------------------------------------------*/
2265/*
2266 * Wireless Private Handler : set histogram
2267 */
2268static int wavelan_set_histo(struct net_device *dev,
2269 struct iw_request_info *info,
2270 union iwreq_data *wrqu,
2271 char *extra)
2272{
2273 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2274
2275 /* Check the number of intervals. */
2276 if (wrqu->data.length > 16) {
2277 return(-E2BIG);
2278 }
2279
2280 /* Disable histo while we copy the addresses.
2281 * As we don't disable interrupts, we need to do this */
2282 lp->his_number = 0;
2283
2284 /* Are there ranges to copy? */
2285 if (wrqu->data.length > 0) {
2286 /* Copy interval ranges to the driver */
2287 memcpy(lp->his_range, extra, wrqu->data.length);
2288
2289 {
2290 int i;
2291 printk(KERN_DEBUG "Histo :");
2292 for(i = 0; i < wrqu->data.length; i++)
2293 printk(" %d", lp->his_range[i]);
2294 printk("\n");
2295 }
2296
2297 /* Reset result structure. */
2298 memset(lp->his_sum, 0x00, sizeof(long) * 16);
2299 }
2300
2301 /* Now we can set the number of ranges */
2302 lp->his_number = wrqu->data.length;
2303
2304 return(0);
2305}
2306
2307/*------------------------------------------------------------------*/
2308/*
2309 * Wireless Private Handler : get histogram
2310 */
2311static int wavelan_get_histo(struct net_device *dev,
2312 struct iw_request_info *info,
2313 union iwreq_data *wrqu,
2314 char *extra)
2315{
2316 net_local *lp = (net_local *) dev->priv; /* lp is not unused */
2317
2318 /* Set the number of intervals. */
2319 wrqu->data.length = lp->his_number;
2320
2321 /* Give back the distribution statistics */
2322 if(lp->his_number > 0)
2323 memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
2324
2325 return(0);
2326}
2327#endif /* HISTOGRAM */
2328
2329/*------------------------------------------------------------------*/
2330/*
2331 * Structures to export the Wireless Handlers
2332 */
2333
2334static const iw_handler wavelan_handler[] =
2335{
2336 NULL, /* SIOCSIWNAME */
2337 wavelan_get_name, /* SIOCGIWNAME */
2338 wavelan_set_nwid, /* SIOCSIWNWID */
2339 wavelan_get_nwid, /* SIOCGIWNWID */
2340 wavelan_set_freq, /* SIOCSIWFREQ */
2341 wavelan_get_freq, /* SIOCGIWFREQ */
2342 NULL, /* SIOCSIWMODE */
2343 NULL, /* SIOCGIWMODE */
2344 wavelan_set_sens, /* SIOCSIWSENS */
2345 wavelan_get_sens, /* SIOCGIWSENS */
2346 NULL, /* SIOCSIWRANGE */
2347 wavelan_get_range, /* SIOCGIWRANGE */
2348 NULL, /* SIOCSIWPRIV */
2349 NULL, /* SIOCGIWPRIV */
2350 NULL, /* SIOCSIWSTATS */
2351 NULL, /* SIOCGIWSTATS */
2352 iw_handler_set_spy, /* SIOCSIWSPY */
2353 iw_handler_get_spy, /* SIOCGIWSPY */
2354 iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
2355 iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
2356 NULL, /* SIOCSIWAP */
2357 NULL, /* SIOCGIWAP */
2358 NULL, /* -- hole -- */
2359 NULL, /* SIOCGIWAPLIST */
2360 NULL, /* -- hole -- */
2361 NULL, /* -- hole -- */
2362 NULL, /* SIOCSIWESSID */
2363 NULL, /* SIOCGIWESSID */
2364 NULL, /* SIOCSIWNICKN */
2365 NULL, /* SIOCGIWNICKN */
2366 NULL, /* -- hole -- */
2367 NULL, /* -- hole -- */
2368 NULL, /* SIOCSIWRATE */
2369 NULL, /* SIOCGIWRATE */
2370 NULL, /* SIOCSIWRTS */
2371 NULL, /* SIOCGIWRTS */
2372 NULL, /* SIOCSIWFRAG */
2373 NULL, /* SIOCGIWFRAG */
2374 NULL, /* SIOCSIWTXPOW */
2375 NULL, /* SIOCGIWTXPOW */
2376 NULL, /* SIOCSIWRETRY */
2377 NULL, /* SIOCGIWRETRY */
2378 /* Bummer ! Why those are only at the end ??? */
2379 wavelan_set_encode, /* SIOCSIWENCODE */
2380 wavelan_get_encode, /* SIOCGIWENCODE */
2381};
2382
2383static const iw_handler wavelan_private_handler[] =
2384{
2385 wavelan_set_qthr, /* SIOCIWFIRSTPRIV */
2386 wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */
2387#ifdef HISTOGRAM
2388 wavelan_set_histo, /* SIOCIWFIRSTPRIV + 2 */
2389 wavelan_get_histo, /* SIOCIWFIRSTPRIV + 3 */
2390#endif /* HISTOGRAM */
2391};
2392
2393static const struct iw_priv_args wavelan_private_args[] = {
2394/*{ cmd, set_args, get_args, name } */
2395 { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
2396 { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
2397 { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" },
2398 { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" },
2399};
2400
2401static const struct iw_handler_def wavelan_handler_def =
2402{
2403 .num_standard = sizeof(wavelan_handler)/sizeof(iw_handler),
2404 .num_private = sizeof(wavelan_private_handler)/sizeof(iw_handler),
2405 .num_private_args = sizeof(wavelan_private_args)/sizeof(struct iw_priv_args),
2406 .standard = wavelan_handler,
2407 .private = wavelan_private_handler,
2408 .private_args = wavelan_private_args,
2409 .get_wireless_stats = wavelan_get_wireless_stats,
2410};
2411
2412/*------------------------------------------------------------------*/
2413/*
2414 * Get wireless statistics.
2415 * Called by /proc/net/wireless
2416 */
2417static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
2418{
2419 unsigned long ioaddr = dev->base_addr;
2420 net_local *lp = (net_local *) dev->priv;
2421 mmr_t m;
2422 iw_stats *wstats;
2423 unsigned long flags;
2424
2425#ifdef DEBUG_IOCTL_TRACE
2426 printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n",
2427 dev->name);
2428#endif
2429
2430 /* Check */
2431 if (lp == (net_local *) NULL)
2432 return (iw_stats *) NULL;
2433
2434 /* Disable interrupts and save flags. */
2435 spin_lock_irqsave(&lp->spinlock, flags);
2436
2437 wstats = &lp->wstats;
2438
2439 /* Get data from the mmc. */
2440 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
2441
2442 mmc_read(ioaddr, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
2443 mmc_read(ioaddr, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l,
2444 2);
2445 mmc_read(ioaddr, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set,
2446 4);
2447
2448 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
2449
2450 /* Copy data to wireless stuff. */
2451 wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
2452 wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
2453 wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
2454 wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
2455 wstats->qual.updated = (((m. mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7)
2456 | ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6)
2457 | ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
2458 wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
2459 wstats->discard.code = 0L;
2460 wstats->discard.misc = 0L;
2461
2462 /* Enable interrupts and restore flags. */
2463 spin_unlock_irqrestore(&lp->spinlock, flags);
2464
2465#ifdef DEBUG_IOCTL_TRACE
2466 printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n",
2467 dev->name);
2468#endif
2469 return &lp->wstats;
2470}
Linus Torvalds1da177e2005-04-16 15:20:36 -07002471
2472/************************* PACKET RECEPTION *************************/
2473/*
2474 * This part deals with receiving the packets.
2475 * The interrupt handler gets an interrupt when a packet has been
2476 * successfully received and calls this part.
2477 */
2478
2479/*------------------------------------------------------------------*/
2480/*
2481 * This routine does the actual copying of data (including the Ethernet
2482 * header structure) from the WaveLAN card to an sk_buff chain that
2483 * will be passed up to the network interface layer. NOTE: we
2484 * currently don't handle trailer protocols (neither does the rest of
2485 * the network interface), so if that is needed, it will (at least in
2486 * part) be added here. The contents of the receive ring buffer are
2487 * copied to a message chain that is then passed to the kernel.
2488 *
2489 * Note: if any errors occur, the packet is "dropped on the floor".
2490 * (called by wv_packet_rcv())
2491 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002492static void
Linus Torvalds1da177e2005-04-16 15:20:36 -07002493wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
2494{
2495 net_local *lp = (net_local *) dev->priv;
2496 unsigned long ioaddr = dev->base_addr;
2497 struct sk_buff *skb;
2498
2499#ifdef DEBUG_RX_TRACE
2500 printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
2501 dev->name, buf_off, sksize);
2502#endif
2503
2504 /* Allocate buffer for the data */
2505 if ((skb = dev_alloc_skb(sksize)) == (struct sk_buff *) NULL) {
2506#ifdef DEBUG_RX_ERROR
2507 printk(KERN_INFO
2508 "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n",
2509 dev->name, sksize);
2510#endif
2511 lp->stats.rx_dropped++;
2512 return;
2513 }
2514
2515 skb->dev = dev;
2516
2517 /* Copy the packet to the buffer. */
2518 obram_read(ioaddr, buf_off, skb_put(skb, sksize), sksize);
2519 skb->protocol = eth_type_trans(skb, dev);
2520
2521#ifdef DEBUG_RX_INFO
2522 wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read");
2523#endif /* DEBUG_RX_INFO */
2524
2525 /* Statistics-gathering and associated stuff.
2526 * It seem a bit messy with all the define, but it's really
2527 * simple... */
2528 if (
2529#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
2530 (lp->spy_data.spy_number > 0) ||
2531#endif /* IW_WIRELESS_SPY */
2532#ifdef HISTOGRAM
2533 (lp->his_number > 0) ||
2534#endif /* HISTOGRAM */
2535 0) {
2536 u8 stats[3]; /* signal level, noise level, signal quality */
2537
2538 /* Read signal level, silence level and signal quality bytes */
2539 /* Note: in the PCMCIA hardware, these are part of the frame.
2540 * It seems that for the ISA hardware, it's nowhere to be
2541 * found in the frame, so I'm obliged to do this (it has a
2542 * side effect on /proc/net/wireless).
2543 * Any ideas?
2544 */
2545 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
2546 mmc_read(ioaddr, mmroff(0, mmr_signal_lvl), stats, 3);
2547 mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
2548
2549#ifdef DEBUG_RX_INFO
2550 printk(KERN_DEBUG
2551 "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
2552 dev->name, stats[0] & 0x3F, stats[1] & 0x3F,
2553 stats[2] & 0x0F);
2554#endif
2555
2556 /* Spying stuff */
2557#ifdef IW_WIRELESS_SPY
2558 wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE,
2559 stats);
2560#endif /* IW_WIRELESS_SPY */
2561#ifdef HISTOGRAM
2562 wl_his_gather(dev, stats);
2563#endif /* HISTOGRAM */
2564 }
2565
2566 /*
2567 * Hand the packet to the network module.
2568 */
2569 netif_rx(skb);
2570
2571 /* Keep statistics up to date */
2572 dev->last_rx = jiffies;
2573 lp->stats.rx_packets++;
2574 lp->stats.rx_bytes += sksize;
2575
2576#ifdef DEBUG_RX_TRACE
2577 printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
2578#endif
2579}
2580
2581/*------------------------------------------------------------------*/
2582/*
2583 * Transfer as many packets as we can
2584 * from the device RAM.
2585 * (called in wavelan_interrupt()).
2586 * Note : the spinlock is already grabbed for us.
2587 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002588static void wv_receive(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002589{
2590 unsigned long ioaddr = dev->base_addr;
2591 net_local *lp = (net_local *) dev->priv;
2592 fd_t fd;
2593 rbd_t rbd;
2594 int nreaped = 0;
2595
2596#ifdef DEBUG_RX_TRACE
2597 printk(KERN_DEBUG "%s: ->wv_receive()\n", dev->name);
2598#endif
2599
2600 /* Loop on each received packet. */
2601 for (;;) {
2602 obram_read(ioaddr, lp->rx_head, (unsigned char *) &fd,
2603 sizeof(fd));
2604
2605 /* Note about the status :
2606 * It start up to be 0 (the value we set). Then, when the RU
2607 * grab the buffer to prepare for reception, it sets the
2608 * FD_STATUS_B flag. When the RU has finished receiving the
2609 * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate
2610 * completion and set the other flags to indicate the eventual
2611 * errors. FD_STATUS_OK indicates that the reception was OK.
2612 */
2613
2614 /* If the current frame is not complete, we have reached the end. */
2615 if ((fd.fd_status & FD_STATUS_C) != FD_STATUS_C)
2616 break; /* This is how we exit the loop. */
2617
2618 nreaped++;
2619
2620 /* Check whether frame was correctly received. */
2621 if ((fd.fd_status & FD_STATUS_OK) == FD_STATUS_OK) {
2622 /* Does the frame contain a pointer to the data? Let's check. */
2623 if (fd.fd_rbd_offset != I82586NULL) {
2624 /* Read the receive buffer descriptor */
2625 obram_read(ioaddr, fd.fd_rbd_offset,
2626 (unsigned char *) &rbd,
2627 sizeof(rbd));
2628
2629#ifdef DEBUG_RX_ERROR
2630 if ((rbd.rbd_status & RBD_STATUS_EOF) !=
2631 RBD_STATUS_EOF) printk(KERN_INFO
2632 "%s: wv_receive(): missing EOF flag.\n",
2633 dev->name);
2634
2635 if ((rbd.rbd_status & RBD_STATUS_F) !=
2636 RBD_STATUS_F) printk(KERN_INFO
2637 "%s: wv_receive(): missing F flag.\n",
2638 dev->name);
2639#endif /* DEBUG_RX_ERROR */
2640
2641 /* Read the packet and transmit to Linux */
2642 wv_packet_read(dev, rbd.rbd_bufl,
2643 rbd.
2644 rbd_status &
2645 RBD_STATUS_ACNT);
2646 }
2647#ifdef DEBUG_RX_ERROR
2648 else /* if frame has no data */
2649 printk(KERN_INFO
2650 "%s: wv_receive(): frame has no data.\n",
2651 dev->name);
2652#endif
2653 } else { /* If reception was no successful */
2654
2655 lp->stats.rx_errors++;
2656
2657#ifdef DEBUG_RX_INFO
2658 printk(KERN_DEBUG
2659 "%s: wv_receive(): frame not received successfully (%X).\n",
2660 dev->name, fd.fd_status);
2661#endif
2662
2663#ifdef DEBUG_RX_ERROR
2664 if ((fd.fd_status & FD_STATUS_S6) != 0)
2665 printk(KERN_INFO
2666 "%s: wv_receive(): no EOF flag.\n",
2667 dev->name);
2668#endif
2669
2670 if ((fd.fd_status & FD_STATUS_S7) != 0) {
2671 lp->stats.rx_length_errors++;
2672#ifdef DEBUG_RX_FAIL
2673 printk(KERN_DEBUG
2674 "%s: wv_receive(): frame too short.\n",
2675 dev->name);
2676#endif
2677 }
2678
2679 if ((fd.fd_status & FD_STATUS_S8) != 0) {
2680 lp->stats.rx_over_errors++;
2681#ifdef DEBUG_RX_FAIL
2682 printk(KERN_DEBUG
2683 "%s: wv_receive(): rx DMA overrun.\n",
2684 dev->name);
2685#endif
2686 }
2687
2688 if ((fd.fd_status & FD_STATUS_S9) != 0) {
2689 lp->stats.rx_fifo_errors++;
2690#ifdef DEBUG_RX_FAIL
2691 printk(KERN_DEBUG
2692 "%s: wv_receive(): ran out of resources.\n",
2693 dev->name);
2694#endif
2695 }
2696
2697 if ((fd.fd_status & FD_STATUS_S10) != 0) {
2698 lp->stats.rx_frame_errors++;
2699#ifdef DEBUG_RX_FAIL
2700 printk(KERN_DEBUG
2701 "%s: wv_receive(): alignment error.\n",
2702 dev->name);
2703#endif
2704 }
2705
2706 if ((fd.fd_status & FD_STATUS_S11) != 0) {
2707 lp->stats.rx_crc_errors++;
2708#ifdef DEBUG_RX_FAIL
2709 printk(KERN_DEBUG
2710 "%s: wv_receive(): CRC error.\n",
2711 dev->name);
2712#endif
2713 }
2714 }
2715
2716 fd.fd_status = 0;
2717 obram_write(ioaddr, fdoff(lp->rx_head, fd_status),
2718 (unsigned char *) &fd.fd_status,
2719 sizeof(fd.fd_status));
2720
2721 fd.fd_command = FD_COMMAND_EL;
2722 obram_write(ioaddr, fdoff(lp->rx_head, fd_command),
2723 (unsigned char *) &fd.fd_command,
2724 sizeof(fd.fd_command));
2725
2726 fd.fd_command = 0;
2727 obram_write(ioaddr, fdoff(lp->rx_last, fd_command),
2728 (unsigned char *) &fd.fd_command,
2729 sizeof(fd.fd_command));
2730
2731 lp->rx_last = lp->rx_head;
2732 lp->rx_head = fd.fd_link_offset;
2733 } /* for(;;) -> loop on all frames */
2734
2735#ifdef DEBUG_RX_INFO
2736 if (nreaped > 1)
2737 printk(KERN_DEBUG "%s: wv_receive(): reaped %d\n",
2738 dev->name, nreaped);
2739#endif
2740#ifdef DEBUG_RX_TRACE
2741 printk(KERN_DEBUG "%s: <-wv_receive()\n", dev->name);
2742#endif
2743}
2744
2745/*********************** PACKET TRANSMISSION ***********************/
2746/*
2747 * This part deals with sending packets through the WaveLAN.
2748 *
2749 */
2750
2751/*------------------------------------------------------------------*/
2752/*
2753 * This routine fills in the appropriate registers and memory
2754 * locations on the WaveLAN card and starts the card off on
2755 * the transmit.
2756 *
2757 * The principle:
2758 * Each block contains a transmit command, a NOP command,
2759 * a transmit block descriptor and a buffer.
2760 * The CU read the transmit block which point to the tbd,
2761 * read the tbd and the content of the buffer.
2762 * When it has finish with it, it goes to the next command
2763 * which in our case is the NOP. The NOP points on itself,
2764 * so the CU stop here.
2765 * When we add the next block, we modify the previous nop
2766 * to make it point on the new tx command.
2767 * Simple, isn't it ?
2768 *
2769 * (called in wavelan_packet_xmit())
2770 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002771static int wv_packet_write(struct net_device * dev, void *buf, short length)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002772{
2773 net_local *lp = (net_local *) dev->priv;
2774 unsigned long ioaddr = dev->base_addr;
2775 unsigned short txblock;
2776 unsigned short txpred;
2777 unsigned short tx_addr;
2778 unsigned short nop_addr;
2779 unsigned short tbd_addr;
2780 unsigned short buf_addr;
2781 ac_tx_t tx;
2782 ac_nop_t nop;
2783 tbd_t tbd;
2784 int clen = length;
2785 unsigned long flags;
2786
2787#ifdef DEBUG_TX_TRACE
2788 printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name,
2789 length);
2790#endif
2791
2792 spin_lock_irqsave(&lp->spinlock, flags);
2793
2794 /* Check nothing bad has happened */
2795 if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
2796#ifdef DEBUG_TX_ERROR
2797 printk(KERN_INFO "%s: wv_packet_write(): Tx queue full.\n",
2798 dev->name);
2799#endif
2800 spin_unlock_irqrestore(&lp->spinlock, flags);
2801 return 1;
2802 }
2803
2804 /* Calculate addresses of next block and previous block. */
2805 txblock = lp->tx_first_free;
2806 txpred = txblock - TXBLOCKZ;
2807 if (txpred < OFFSET_CU)
2808 txpred += NTXBLOCKS * TXBLOCKZ;
2809 lp->tx_first_free += TXBLOCKZ;
2810 if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
2811 lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
2812
2813 lp->tx_n_in_use++;
2814
2815 /* Calculate addresses of the different parts of the block. */
2816 tx_addr = txblock;
2817 nop_addr = tx_addr + sizeof(tx);
2818 tbd_addr = nop_addr + sizeof(nop);
2819 buf_addr = tbd_addr + sizeof(tbd);
2820
2821 /*
2822 * Transmit command
2823 */
2824 tx.tx_h.ac_status = 0;
2825 obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
2826 (unsigned char *) &tx.tx_h.ac_status,
2827 sizeof(tx.tx_h.ac_status));
2828
2829 /*
2830 * NOP command
2831 */
2832 nop.nop_h.ac_status = 0;
2833 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
2834 (unsigned char *) &nop.nop_h.ac_status,
2835 sizeof(nop.nop_h.ac_status));
2836 nop.nop_h.ac_link = nop_addr;
2837 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
2838 (unsigned char *) &nop.nop_h.ac_link,
2839 sizeof(nop.nop_h.ac_link));
2840
2841 /*
2842 * Transmit buffer descriptor
2843 */
2844 tbd.tbd_status = TBD_STATUS_EOF | (TBD_STATUS_ACNT & clen);
2845 tbd.tbd_next_bd_offset = I82586NULL;
2846 tbd.tbd_bufl = buf_addr;
2847 tbd.tbd_bufh = 0;
2848 obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, sizeof(tbd));
2849
2850 /*
2851 * Data
2852 */
2853 obram_write(ioaddr, buf_addr, buf, length);
2854
2855 /*
2856 * Overwrite the predecessor NOP link
2857 * so that it points to this txblock.
2858 */
2859 nop_addr = txpred + sizeof(tx);
2860 nop.nop_h.ac_status = 0;
2861 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
2862 (unsigned char *) &nop.nop_h.ac_status,
2863 sizeof(nop.nop_h.ac_status));
2864 nop.nop_h.ac_link = txblock;
2865 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
2866 (unsigned char *) &nop.nop_h.ac_link,
2867 sizeof(nop.nop_h.ac_link));
2868
2869 /* Make sure the watchdog will keep quiet for a while */
2870 dev->trans_start = jiffies;
2871
2872 /* Keep stats up to date. */
2873 lp->stats.tx_bytes += length;
2874
2875 if (lp->tx_first_in_use == I82586NULL)
2876 lp->tx_first_in_use = txblock;
2877
2878 if (lp->tx_n_in_use < NTXBLOCKS - 1)
2879 netif_wake_queue(dev);
2880
2881 spin_unlock_irqrestore(&lp->spinlock, flags);
2882
2883#ifdef DEBUG_TX_INFO
2884 wv_packet_info((u8 *) buf, length, dev->name,
2885 "wv_packet_write");
2886#endif /* DEBUG_TX_INFO */
2887
2888#ifdef DEBUG_TX_TRACE
2889 printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
2890#endif
2891
2892 return 0;
2893}
2894
2895/*------------------------------------------------------------------*/
2896/*
2897 * This routine is called when we want to send a packet (NET3 callback)
2898 * In this routine, we check if the harware is ready to accept
2899 * the packet. We also prevent reentrance. Then we call the function
2900 * to send the packet.
2901 */
2902static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
2903{
2904 net_local *lp = (net_local *) dev->priv;
2905 unsigned long flags;
Alan Coxaa95abe2006-06-22 14:25:34 +01002906 char data[ETH_ZLEN];
Linus Torvalds1da177e2005-04-16 15:20:36 -07002907
2908#ifdef DEBUG_TX_TRACE
2909 printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
2910 (unsigned) skb);
2911#endif
2912
2913 /*
2914 * Block a timer-based transmit from overlapping.
2915 * In other words, prevent reentering this routine.
2916 */
2917 netif_stop_queue(dev);
2918
2919 /* If somebody has asked to reconfigure the controller,
2920 * we can do it now.
2921 */
2922 if (lp->reconfig_82586) {
2923 spin_lock_irqsave(&lp->spinlock, flags);
2924 wv_82586_config(dev);
2925 spin_unlock_irqrestore(&lp->spinlock, flags);
2926 /* Check that we can continue */
2927 if (lp->tx_n_in_use == (NTXBLOCKS - 1))
2928 return 1;
2929 }
2930#ifdef DEBUG_TX_ERROR
2931 if (skb->next)
2932 printk(KERN_INFO "skb has next\n");
2933#endif
2934
2935 /* Do we need some padding? */
2936 /* Note : on wireless the propagation time is in the order of 1us,
2937 * and we don't have the Ethernet specific requirement of beeing
2938 * able to detect collisions, therefore in theory we don't really
2939 * need to pad. Jean II */
2940 if (skb->len < ETH_ZLEN) {
Alan Coxaa95abe2006-06-22 14:25:34 +01002941 memset(data, 0, ETH_ZLEN);
2942 memcpy(data, skb->data, skb->len);
2943 /* Write packet on the card */
2944 if(wv_packet_write(dev, data, ETH_ZLEN))
2945 return 1; /* We failed */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002946 }
Alan Coxaa95abe2006-06-22 14:25:34 +01002947 else if(wv_packet_write(dev, skb->data, skb->len))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002948 return 1; /* We failed */
2949
Alan Coxaa95abe2006-06-22 14:25:34 +01002950
Linus Torvalds1da177e2005-04-16 15:20:36 -07002951 dev_kfree_skb(skb);
2952
2953#ifdef DEBUG_TX_TRACE
2954 printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
2955#endif
2956 return 0;
2957}
2958
2959/*********************** HARDWARE CONFIGURATION ***********************/
2960/*
2961 * This part does the real job of starting and configuring the hardware.
2962 */
2963
2964/*--------------------------------------------------------------------*/
2965/*
2966 * Routine to initialize the Modem Management Controller.
2967 * (called by wv_hw_reset())
2968 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002969static int wv_mmc_init(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002970{
2971 unsigned long ioaddr = dev->base_addr;
2972 net_local *lp = (net_local *) dev->priv;
2973 psa_t psa;
2974 mmw_t m;
2975 int configured;
2976
2977#ifdef DEBUG_CONFIG_TRACE
2978 printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
2979#endif
2980
2981 /* Read the parameter storage area. */
2982 psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
2983
2984#ifdef USE_PSA_CONFIG
2985 configured = psa.psa_conf_status & 1;
2986#else
2987 configured = 0;
2988#endif
2989
2990 /* Is the PSA is not configured */
2991 if (!configured) {
2992 /* User will be able to configure NWID later (with iwconfig). */
2993 psa.psa_nwid[0] = 0;
2994 psa.psa_nwid[1] = 0;
2995
2996 /* no NWID checking since NWID is not set */
2997 psa.psa_nwid_select = 0;
2998
2999 /* Disable encryption */
3000 psa.psa_encryption_select = 0;
3001
3002 /* Set to standard values:
3003 * 0x04 for AT,
3004 * 0x01 for MCA,
3005 * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
3006 */
3007 if (psa.psa_comp_number & 1)
3008 psa.psa_thr_pre_set = 0x01;
3009 else
3010 psa.psa_thr_pre_set = 0x04;
3011 psa.psa_quality_thr = 0x03;
3012
3013 /* It is configured */
3014 psa.psa_conf_status |= 1;
3015
3016#ifdef USE_PSA_CONFIG
3017 /* Write the psa. */
3018 psa_write(ioaddr, lp->hacr,
3019 (char *) psa.psa_nwid - (char *) &psa,
3020 (unsigned char *) psa.psa_nwid, 4);
3021 psa_write(ioaddr, lp->hacr,
3022 (char *) &psa.psa_thr_pre_set - (char *) &psa,
3023 (unsigned char *) &psa.psa_thr_pre_set, 1);
3024 psa_write(ioaddr, lp->hacr,
3025 (char *) &psa.psa_quality_thr - (char *) &psa,
3026 (unsigned char *) &psa.psa_quality_thr, 1);
3027 psa_write(ioaddr, lp->hacr,
3028 (char *) &psa.psa_conf_status - (char *) &psa,
3029 (unsigned char *) &psa.psa_conf_status, 1);
3030 /* update the Wavelan checksum */
3031 update_psa_checksum(dev, ioaddr, lp->hacr);
3032#endif
3033 }
3034
3035 /* Zero the mmc structure. */
3036 memset(&m, 0x00, sizeof(m));
3037
3038 /* Copy PSA info to the mmc. */
3039 m.mmw_netw_id_l = psa.psa_nwid[1];
3040 m.mmw_netw_id_h = psa.psa_nwid[0];
3041
3042 if (psa.psa_nwid_select & 1)
3043 m.mmw_loopt_sel = 0x00;
3044 else
3045 m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
3046
3047 memcpy(&m.mmw_encr_key, &psa.psa_encryption_key,
3048 sizeof(m.mmw_encr_key));
3049
3050 if (psa.psa_encryption_select)
3051 m.mmw_encr_enable =
3052 MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
3053 else
3054 m.mmw_encr_enable = 0;
3055
3056 m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
3057 m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
3058
3059 /*
3060 * Set default modem control parameters.
3061 * See NCR document 407-0024326 Rev. A.
3062 */
3063 m.mmw_jabber_enable = 0x01;
3064 m.mmw_freeze = 0;
3065 m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
3066 m.mmw_ifs = 0x20;
3067 m.mmw_mod_delay = 0x04;
3068 m.mmw_jam_time = 0x38;
3069
3070 m.mmw_des_io_invert = 0;
3071 m.mmw_decay_prm = 0;
3072 m.mmw_decay_updat_prm = 0;
3073
3074 /* Write all info to MMC. */
3075 mmc_write(ioaddr, 0, (u8 *) & m, sizeof(m));
3076
3077 /* The following code starts the modem of the 2.00 frequency
3078 * selectable cards at power on. It's not strictly needed for the
3079 * following boots.
3080 * The original patch was by Joe Finney for the PCMCIA driver, but
3081 * I've cleaned it up a bit and added documentation.
3082 * Thanks to Loeke Brederveld from Lucent for the info.
3083 */
3084
3085 /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
3086 * Does it work for everybody, especially old cards? */
3087 /* Note: WFREQSEL verifies that it is able to read a sensible
3088 * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID
3089 * is 0xA (Xilinx version) or 0xB (Ariadne version).
3090 * My test is more crude but does work. */
3091 if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
3092 (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
3093 /* We must download the frequency parameters to the
3094 * synthesizers (from the EEPROM - area 1)
3095 * Note: as the EEPROM is automatically decremented, we set the end
3096 * if the area... */
3097 m.mmw_fee_addr = 0x0F;
3098 m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
3099 mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
3100 (unsigned char *) &m.mmw_fee_ctrl, 2);
3101
3102 /* Wait until the download is finished. */
3103 fee_wait(ioaddr, 100, 100);
3104
3105#ifdef DEBUG_CONFIG_INFO
3106 /* The frequency was in the last word downloaded. */
3107 mmc_read(ioaddr, (char *) &m.mmw_fee_data_l - (char *) &m,
3108 (unsigned char *) &m.mmw_fee_data_l, 2);
3109
3110 /* Print some info for the user. */
3111 printk(KERN_DEBUG
3112 "%s: WaveLAN 2.00 recognised (frequency select). Current frequency = %ld\n",
3113 dev->name,
3114 ((m.
3115 mmw_fee_data_h << 4) | (m.mmw_fee_data_l >> 4)) *
3116 5 / 2 + 24000L);
3117#endif
3118
3119 /* We must now download the power adjust value (gain) to
3120 * the synthesizers (from the EEPROM - area 7 - DAC). */
3121 m.mmw_fee_addr = 0x61;
3122 m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
3123 mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
3124 (unsigned char *) &m.mmw_fee_ctrl, 2);
3125
3126 /* Wait until the download is finished. */
3127 }
3128 /* if 2.00 card */
3129#ifdef DEBUG_CONFIG_TRACE
3130 printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
3131#endif
3132 return 0;
3133}
3134
3135/*------------------------------------------------------------------*/
3136/*
3137 * Construct the fd and rbd structures.
3138 * Start the receive unit.
3139 * (called by wv_hw_reset())
3140 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08003141static int wv_ru_start(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003142{
3143 net_local *lp = (net_local *) dev->priv;
3144 unsigned long ioaddr = dev->base_addr;
3145 u16 scb_cs;
3146 fd_t fd;
3147 rbd_t rbd;
3148 u16 rx;
3149 u16 rx_next;
3150 int i;
3151
3152#ifdef DEBUG_CONFIG_TRACE
3153 printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
3154#endif
3155
3156 obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
3157 (unsigned char *) &scb_cs, sizeof(scb_cs));
3158 if ((scb_cs & SCB_ST_RUS) == SCB_ST_RUS_RDY)
3159 return 0;
3160
3161 lp->rx_head = OFFSET_RU;
3162
3163 for (i = 0, rx = lp->rx_head; i < NRXBLOCKS; i++, rx = rx_next) {
3164 rx_next =
3165 (i == NRXBLOCKS - 1) ? lp->rx_head : rx + RXBLOCKZ;
3166
3167 fd.fd_status = 0;
3168 fd.fd_command = (i == NRXBLOCKS - 1) ? FD_COMMAND_EL : 0;
3169 fd.fd_link_offset = rx_next;
3170 fd.fd_rbd_offset = rx + sizeof(fd);
3171 obram_write(ioaddr, rx, (unsigned char *) &fd, sizeof(fd));
3172
3173 rbd.rbd_status = 0;
3174 rbd.rbd_next_rbd_offset = I82586NULL;
3175 rbd.rbd_bufl = rx + sizeof(fd) + sizeof(rbd);
3176 rbd.rbd_bufh = 0;
3177 rbd.rbd_el_size = RBD_EL | (RBD_SIZE & MAXDATAZ);
3178 obram_write(ioaddr, rx + sizeof(fd),
3179 (unsigned char *) &rbd, sizeof(rbd));
3180
3181 lp->rx_last = rx;
3182 }
3183
3184 obram_write(ioaddr, scboff(OFFSET_SCB, scb_rfa_offset),
3185 (unsigned char *) &lp->rx_head, sizeof(lp->rx_head));
3186
3187 scb_cs = SCB_CMD_RUC_GO;
3188 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
3189 (unsigned char *) &scb_cs, sizeof(scb_cs));
3190
3191 set_chan_attn(ioaddr, lp->hacr);
3192
3193 for (i = 1000; i > 0; i--) {
3194 obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
3195 (unsigned char *) &scb_cs, sizeof(scb_cs));
3196 if (scb_cs == 0)
3197 break;
3198
3199 udelay(10);
3200 }
3201
3202 if (i <= 0) {
3203#ifdef DEBUG_CONFIG_ERROR
3204 printk(KERN_INFO
3205 "%s: wavelan_ru_start(): board not accepting command.\n",
3206 dev->name);
3207#endif
3208 return -1;
3209 }
3210#ifdef DEBUG_CONFIG_TRACE
3211 printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
3212#endif
3213 return 0;
3214}
3215
3216/*------------------------------------------------------------------*/
3217/*
3218 * Initialise the transmit blocks.
3219 * Start the command unit executing the NOP
3220 * self-loop of the first transmit block.
3221 *
3222 * Here we create the list of send buffers used to transmit packets
3223 * between the PC and the command unit. For each buffer, we create a
3224 * buffer descriptor (pointing on the buffer), a transmit command
3225 * (pointing to the buffer descriptor) and a NOP command.
3226 * The transmit command is linked to the NOP, and the NOP to itself.
3227 * When we will have finished executing the transmit command, we will
3228 * then loop on the NOP. By releasing the NOP link to a new command,
3229 * we may send another buffer.
3230 *
3231 * (called by wv_hw_reset())
3232 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08003233static int wv_cu_start(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003234{
3235 net_local *lp = (net_local *) dev->priv;
3236 unsigned long ioaddr = dev->base_addr;
3237 int i;
3238 u16 txblock;
3239 u16 first_nop;
3240 u16 scb_cs;
3241
3242#ifdef DEBUG_CONFIG_TRACE
3243 printk(KERN_DEBUG "%s: ->wv_cu_start()\n", dev->name);
3244#endif
3245
3246 lp->tx_first_free = OFFSET_CU;
3247 lp->tx_first_in_use = I82586NULL;
3248
3249 for (i = 0, txblock = OFFSET_CU;
3250 i < NTXBLOCKS; i++, txblock += TXBLOCKZ) {
3251 ac_tx_t tx;
3252 ac_nop_t nop;
3253 tbd_t tbd;
3254 unsigned short tx_addr;
3255 unsigned short nop_addr;
3256 unsigned short tbd_addr;
3257 unsigned short buf_addr;
3258
3259 tx_addr = txblock;
3260 nop_addr = tx_addr + sizeof(tx);
3261 tbd_addr = nop_addr + sizeof(nop);
3262 buf_addr = tbd_addr + sizeof(tbd);
3263
3264 tx.tx_h.ac_status = 0;
3265 tx.tx_h.ac_command = acmd_transmit | AC_CFLD_I;
3266 tx.tx_h.ac_link = nop_addr;
3267 tx.tx_tbd_offset = tbd_addr;
3268 obram_write(ioaddr, tx_addr, (unsigned char *) &tx,
3269 sizeof(tx));
3270
3271 nop.nop_h.ac_status = 0;
3272 nop.nop_h.ac_command = acmd_nop;
3273 nop.nop_h.ac_link = nop_addr;
3274 obram_write(ioaddr, nop_addr, (unsigned char *) &nop,
3275 sizeof(nop));
3276
3277 tbd.tbd_status = TBD_STATUS_EOF;
3278 tbd.tbd_next_bd_offset = I82586NULL;
3279 tbd.tbd_bufl = buf_addr;
3280 tbd.tbd_bufh = 0;
3281 obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd,
3282 sizeof(tbd));
3283 }
3284
3285 first_nop =
3286 OFFSET_CU + (NTXBLOCKS - 1) * TXBLOCKZ + sizeof(ac_tx_t);
3287 obram_write(ioaddr, scboff(OFFSET_SCB, scb_cbl_offset),
3288 (unsigned char *) &first_nop, sizeof(first_nop));
3289
3290 scb_cs = SCB_CMD_CUC_GO;
3291 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
3292 (unsigned char *) &scb_cs, sizeof(scb_cs));
3293
3294 set_chan_attn(ioaddr, lp->hacr);
3295
3296 for (i = 1000; i > 0; i--) {
3297 obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
3298 (unsigned char *) &scb_cs, sizeof(scb_cs));
3299 if (scb_cs == 0)
3300 break;
3301
3302 udelay(10);
3303 }
3304
3305 if (i <= 0) {
3306#ifdef DEBUG_CONFIG_ERROR
3307 printk(KERN_INFO
3308 "%s: wavelan_cu_start(): board not accepting command.\n",
3309 dev->name);
3310#endif
3311 return -1;
3312 }
3313
3314 lp->tx_n_in_use = 0;
3315 netif_start_queue(dev);
3316#ifdef DEBUG_CONFIG_TRACE
3317 printk(KERN_DEBUG "%s: <-wv_cu_start()\n", dev->name);
3318#endif
3319 return 0;
3320}
3321
3322/*------------------------------------------------------------------*/
3323/*
3324 * This routine does a standard configuration of the WaveLAN
3325 * controller (i82586).
3326 *
3327 * It initialises the scp, iscp and scb structure
3328 * The first two are just pointers to the next.
3329 * The last one is used for basic configuration and for basic
3330 * communication (interrupt status).
3331 *
3332 * (called by wv_hw_reset())
3333 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08003334static int wv_82586_start(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003335{
3336 net_local *lp = (net_local *) dev->priv;
3337 unsigned long ioaddr = dev->base_addr;
3338 scp_t scp; /* system configuration pointer */
3339 iscp_t iscp; /* intermediate scp */
3340 scb_t scb; /* system control block */
3341 ach_t cb; /* Action command header */
3342 u8 zeroes[512];
3343 int i;
3344
3345#ifdef DEBUG_CONFIG_TRACE
3346 printk(KERN_DEBUG "%s: ->wv_82586_start()\n", dev->name);
3347#endif
3348
3349 /*
3350 * Clear the onboard RAM.
3351 */
3352 memset(&zeroes[0], 0x00, sizeof(zeroes));
3353 for (i = 0; i < I82586_MEMZ; i += sizeof(zeroes))
3354 obram_write(ioaddr, i, &zeroes[0], sizeof(zeroes));
3355
3356 /*
3357 * Construct the command unit structures:
3358 * scp, iscp, scb, cb.
3359 */
3360 memset(&scp, 0x00, sizeof(scp));
3361 scp.scp_sysbus = SCP_SY_16BBUS;
3362 scp.scp_iscpl = OFFSET_ISCP;
3363 obram_write(ioaddr, OFFSET_SCP, (unsigned char *) &scp,
3364 sizeof(scp));
3365
3366 memset(&iscp, 0x00, sizeof(iscp));
3367 iscp.iscp_busy = 1;
3368 iscp.iscp_offset = OFFSET_SCB;
3369 obram_write(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
3370 sizeof(iscp));
3371
3372 /* Our first command is to reset the i82586. */
3373 memset(&scb, 0x00, sizeof(scb));
3374 scb.scb_command = SCB_CMD_RESET;
3375 scb.scb_cbl_offset = OFFSET_CU;
3376 scb.scb_rfa_offset = OFFSET_RU;
3377 obram_write(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
3378 sizeof(scb));
3379
3380 set_chan_attn(ioaddr, lp->hacr);
3381
3382 /* Wait for command to finish. */
3383 for (i = 1000; i > 0; i--) {
3384 obram_read(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
3385 sizeof(iscp));
3386
3387 if (iscp.iscp_busy == (unsigned short) 0)
3388 break;
3389
3390 udelay(10);
3391 }
3392
3393 if (i <= 0) {
3394#ifdef DEBUG_CONFIG_ERROR
3395 printk(KERN_INFO
3396 "%s: wv_82586_start(): iscp_busy timeout.\n",
3397 dev->name);
3398#endif
3399 return -1;
3400 }
3401
3402 /* Check command completion. */
3403 for (i = 15; i > 0; i--) {
3404 obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
3405 sizeof(scb));
3406
3407 if (scb.scb_status == (SCB_ST_CX | SCB_ST_CNA))
3408 break;
3409
3410 udelay(10);
3411 }
3412
3413 if (i <= 0) {
3414#ifdef DEBUG_CONFIG_ERROR
3415 printk(KERN_INFO
3416 "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n",
3417 dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status);
3418#endif
3419 return -1;
3420 }
3421
3422 wv_ack(dev);
3423
3424 /* Set the action command header. */
3425 memset(&cb, 0x00, sizeof(cb));
3426 cb.ac_command = AC_CFLD_EL | (AC_CFLD_CMD & acmd_diagnose);
3427 cb.ac_link = OFFSET_CU;
3428 obram_write(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
3429
3430 if (wv_synchronous_cmd(dev, "diag()") == -1)
3431 return -1;
3432
3433 obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
3434 if (cb.ac_status & AC_SFLD_FAIL) {
3435#ifdef DEBUG_CONFIG_ERROR
3436 printk(KERN_INFO
3437 "%s: wv_82586_start(): i82586 Self Test failed.\n",
3438 dev->name);
3439#endif
3440 return -1;
3441 }
3442#ifdef DEBUG_I82586_SHOW
3443 wv_scb_show(ioaddr);
3444#endif
3445
3446#ifdef DEBUG_CONFIG_TRACE
3447 printk(KERN_DEBUG "%s: <-wv_82586_start()\n", dev->name);
3448#endif
3449 return 0;
3450}
3451
3452/*------------------------------------------------------------------*/
3453/*
3454 * This routine does a standard configuration of the WaveLAN
3455 * controller (i82586).
3456 *
3457 * This routine is a violent hack. We use the first free transmit block
3458 * to make our configuration. In the buffer area, we create the three
3459 * configuration commands (linked). We make the previous NOP point to
3460 * the beginning of the buffer instead of the tx command. After, we go
3461 * as usual to the NOP command.
3462 * Note that only the last command (mc_set) will generate an interrupt.
3463 *
3464 * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit())
3465 */
3466static void wv_82586_config(struct net_device * dev)
3467{
3468 net_local *lp = (net_local *) dev->priv;
3469 unsigned long ioaddr = dev->base_addr;
3470 unsigned short txblock;
3471 unsigned short txpred;
3472 unsigned short tx_addr;
3473 unsigned short nop_addr;
3474 unsigned short tbd_addr;
3475 unsigned short cfg_addr;
3476 unsigned short ias_addr;
3477 unsigned short mcs_addr;
3478 ac_tx_t tx;
3479 ac_nop_t nop;
3480 ac_cfg_t cfg; /* Configure action */
3481 ac_ias_t ias; /* IA-setup action */
3482 ac_mcs_t mcs; /* Multicast setup */
3483 struct dev_mc_list *dmi;
3484
3485#ifdef DEBUG_CONFIG_TRACE
3486 printk(KERN_DEBUG "%s: ->wv_82586_config()\n", dev->name);
3487#endif
3488
3489 /* Check nothing bad has happened */
3490 if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
3491#ifdef DEBUG_CONFIG_ERROR
3492 printk(KERN_INFO "%s: wv_82586_config(): Tx queue full.\n",
3493 dev->name);
3494#endif
3495 return;
3496 }
3497
3498 /* Calculate addresses of next block and previous block. */
3499 txblock = lp->tx_first_free;
3500 txpred = txblock - TXBLOCKZ;
3501 if (txpred < OFFSET_CU)
3502 txpred += NTXBLOCKS * TXBLOCKZ;
3503 lp->tx_first_free += TXBLOCKZ;
3504 if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
3505 lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
3506
3507 lp->tx_n_in_use++;
3508
3509 /* Calculate addresses of the different parts of the block. */
3510 tx_addr = txblock;
3511 nop_addr = tx_addr + sizeof(tx);
3512 tbd_addr = nop_addr + sizeof(nop);
3513 cfg_addr = tbd_addr + sizeof(tbd_t); /* beginning of the buffer */
3514 ias_addr = cfg_addr + sizeof(cfg);
3515 mcs_addr = ias_addr + sizeof(ias);
3516
3517 /*
3518 * Transmit command
3519 */
3520 tx.tx_h.ac_status = 0xFFFF; /* Fake completion value */
3521 obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
3522 (unsigned char *) &tx.tx_h.ac_status,
3523 sizeof(tx.tx_h.ac_status));
3524
3525 /*
3526 * NOP command
3527 */
3528 nop.nop_h.ac_status = 0;
3529 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
3530 (unsigned char *) &nop.nop_h.ac_status,
3531 sizeof(nop.nop_h.ac_status));
3532 nop.nop_h.ac_link = nop_addr;
3533 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
3534 (unsigned char *) &nop.nop_h.ac_link,
3535 sizeof(nop.nop_h.ac_link));
3536
3537 /* Create a configure action. */
3538 memset(&cfg, 0x00, sizeof(cfg));
3539
3540 /*
3541 * For Linux we invert AC_CFG_ALOC() so as to conform
3542 * to the way that net packets reach us from above.
3543 * (See also ac_tx_t.)
3544 *
3545 * Updated from Wavelan Manual WCIN085B
3546 */
3547 cfg.cfg_byte_cnt =
3548 AC_CFG_BYTE_CNT(sizeof(ac_cfg_t) - sizeof(ach_t));
3549 cfg.cfg_fifolim = AC_CFG_FIFOLIM(4);
3550 cfg.cfg_byte8 = AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0);
3551 cfg.cfg_byte9 = AC_CFG_ELPBCK(0) |
3552 AC_CFG_ILPBCK(0) |
3553 AC_CFG_PRELEN(AC_CFG_PLEN_2) |
3554 AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE);
3555 cfg.cfg_byte10 = AC_CFG_BOFMET(1) |
3556 AC_CFG_ACR(6) | AC_CFG_LINPRIO(0);
3557 cfg.cfg_ifs = 0x20;
3558 cfg.cfg_slotl = 0x0C;
3559 cfg.cfg_byte13 = AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0);
3560 cfg.cfg_byte14 = AC_CFG_FLGPAD(0) |
3561 AC_CFG_BTSTF(0) |
3562 AC_CFG_CRC16(0) |
3563 AC_CFG_NCRC(0) |
3564 AC_CFG_TNCRS(1) |
3565 AC_CFG_MANCH(0) |
3566 AC_CFG_BCDIS(0) | AC_CFG_PRM(lp->promiscuous);
3567 cfg.cfg_byte15 = AC_CFG_ICDS(0) |
3568 AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0);
3569/*
3570 cfg.cfg_min_frm_len = AC_CFG_MNFRM(64);
3571*/
3572 cfg.cfg_min_frm_len = AC_CFG_MNFRM(8);
3573
3574 cfg.cfg_h.ac_command = (AC_CFLD_CMD & acmd_configure);
3575 cfg.cfg_h.ac_link = ias_addr;
3576 obram_write(ioaddr, cfg_addr, (unsigned char *) &cfg, sizeof(cfg));
3577
3578 /* Set up the MAC address */
3579 memset(&ias, 0x00, sizeof(ias));
3580 ias.ias_h.ac_command = (AC_CFLD_CMD & acmd_ia_setup);
3581 ias.ias_h.ac_link = mcs_addr;
3582 memcpy(&ias.ias_addr[0], (unsigned char *) &dev->dev_addr[0],
3583 sizeof(ias.ias_addr));
3584 obram_write(ioaddr, ias_addr, (unsigned char *) &ias, sizeof(ias));
3585
3586 /* Initialize adapter's Ethernet multicast addresses */
3587 memset(&mcs, 0x00, sizeof(mcs));
3588 mcs.mcs_h.ac_command = AC_CFLD_I | (AC_CFLD_CMD & acmd_mc_setup);
3589 mcs.mcs_h.ac_link = nop_addr;
3590 mcs.mcs_cnt = WAVELAN_ADDR_SIZE * lp->mc_count;
3591 obram_write(ioaddr, mcs_addr, (unsigned char *) &mcs, sizeof(mcs));
3592
3593 /* Any address to set? */
3594 if (lp->mc_count) {
3595 for (dmi = dev->mc_list; dmi; dmi = dmi->next)
3596 outsw(PIOP1(ioaddr), (u16 *) dmi->dmi_addr,
3597 WAVELAN_ADDR_SIZE >> 1);
3598
3599#ifdef DEBUG_CONFIG_INFO
3600 printk(KERN_DEBUG
3601 "%s: wv_82586_config(): set %d multicast addresses:\n",
3602 dev->name, lp->mc_count);
3603 for (dmi = dev->mc_list; dmi; dmi = dmi->next)
3604 printk(KERN_DEBUG
3605 " %02x:%02x:%02x:%02x:%02x:%02x\n",
3606 dmi->dmi_addr[0], dmi->dmi_addr[1],
3607 dmi->dmi_addr[2], dmi->dmi_addr[3],
3608 dmi->dmi_addr[4], dmi->dmi_addr[5]);
3609#endif
3610 }
3611
3612 /*
3613 * Overwrite the predecessor NOP link
3614 * so that it points to the configure action.
3615 */
3616 nop_addr = txpred + sizeof(tx);
3617 nop.nop_h.ac_status = 0;
3618 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
3619 (unsigned char *) &nop.nop_h.ac_status,
3620 sizeof(nop.nop_h.ac_status));
3621 nop.nop_h.ac_link = cfg_addr;
3622 obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
3623 (unsigned char *) &nop.nop_h.ac_link,
3624 sizeof(nop.nop_h.ac_link));
3625
3626 /* Job done, clear the flag */
3627 lp->reconfig_82586 = 0;
3628
3629 if (lp->tx_first_in_use == I82586NULL)
3630 lp->tx_first_in_use = txblock;
3631
3632 if (lp->tx_n_in_use == (NTXBLOCKS - 1))
3633 netif_stop_queue(dev);
3634
3635#ifdef DEBUG_CONFIG_TRACE
3636 printk(KERN_DEBUG "%s: <-wv_82586_config()\n", dev->name);
3637#endif
3638}
3639
3640/*------------------------------------------------------------------*/
3641/*
3642 * This routine, called by wavelan_close(), gracefully stops the
3643 * WaveLAN controller (i82586).
3644 * (called by wavelan_close())
3645 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08003646static void wv_82586_stop(struct net_device * dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003647{
3648 net_local *lp = (net_local *) dev->priv;
3649 unsigned long ioaddr = dev->base_addr;
3650 u16 scb_cmd;
3651
3652#ifdef DEBUG_CONFIG_TRACE
3653 printk(KERN_DEBUG "%s: ->wv_82586_stop()\n", dev->name);
3654#endif
3655
3656 /* Suspend both command unit and receive unit. */
3657 scb_cmd =
3658 (SCB_CMD_CUC & SCB_CMD_CUC_SUS) | (SCB_CMD_RUC &
3659 SCB_CMD_RUC_SUS);
3660 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
3661 (unsigned char *) &scb_cmd, sizeof(scb_cmd));
3662 set_chan_attn(ioaddr, lp->hacr);
3663
3664 /* No more interrupts */
3665 wv_ints_off(dev);
3666
3667#ifdef DEBUG_CONFIG_TRACE
3668 printk(KERN_DEBUG "%s: <-wv_82586_stop()\n", dev->name);
3669#endif
3670}
3671
3672/*------------------------------------------------------------------*/
3673/*
3674 * Totally reset the WaveLAN and restart it.
3675 * Performs the following actions:
3676 * 1. A power reset (reset DMA)
3677 * 2. Initialize the radio modem (using wv_mmc_init)
3678 * 3. Reset & Configure LAN controller (using wv_82586_start)
3679 * 4. Start the LAN controller's command unit
3680 * 5. Start the LAN controller's receive unit
3681 * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open())
3682 */
3683static int wv_hw_reset(struct net_device * dev)
3684{
3685 net_local *lp = (net_local *) dev->priv;
3686 unsigned long ioaddr = dev->base_addr;
3687
3688#ifdef DEBUG_CONFIG_TRACE
3689 printk(KERN_DEBUG "%s: ->wv_hw_reset(dev=0x%x)\n", dev->name,
3690 (unsigned int) dev);
3691#endif
3692
3693 /* Increase the number of resets done. */
3694 lp->nresets++;
3695
3696 wv_hacr_reset(ioaddr);
3697 lp->hacr = HACR_DEFAULT;
3698
3699 if ((wv_mmc_init(dev) < 0) || (wv_82586_start(dev) < 0))
3700 return -1;
3701
3702 /* Enable the card to send interrupts. */
3703 wv_ints_on(dev);
3704
3705 /* Start card functions */
3706 if (wv_cu_start(dev) < 0)
3707 return -1;
3708
3709 /* Setup the controller and parameters */
3710 wv_82586_config(dev);
3711
3712 /* Finish configuration with the receive unit */
3713 if (wv_ru_start(dev) < 0)
3714 return -1;
3715
3716#ifdef DEBUG_CONFIG_TRACE
3717 printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
3718#endif
3719 return 0;
3720}
3721
3722/*------------------------------------------------------------------*/
3723/*
3724 * Check if there is a WaveLAN at the specific base address.
3725 * As a side effect, this reads the MAC address.
3726 * (called in wavelan_probe() and init_module())
3727 */
3728static int wv_check_ioaddr(unsigned long ioaddr, u8 * mac)
3729{
3730 int i; /* Loop counter */
3731
3732 /* Check if the base address if available. */
3733 if (!request_region(ioaddr, sizeof(ha_t), "wavelan probe"))
3734 return -EBUSY; /* ioaddr already used */
3735
3736 /* Reset host interface */
3737 wv_hacr_reset(ioaddr);
3738
3739 /* Read the MAC address from the parameter storage area. */
3740 psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_univ_mac_addr),
3741 mac, 6);
3742
3743 release_region(ioaddr, sizeof(ha_t));
3744
3745 /*
3746 * Check the first three octets of the address for the manufacturer's code.
3747 * Note: if this can't find your WaveLAN card, you've got a
3748 * non-NCR/AT&T/Lucent ISA card. See wavelan.p.h for detail on
3749 * how to configure your card.
3750 */
3751 for (i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++)
3752 if ((mac[0] == MAC_ADDRESSES[i][0]) &&
3753 (mac[1] == MAC_ADDRESSES[i][1]) &&
3754 (mac[2] == MAC_ADDRESSES[i][2]))
3755 return 0;
3756
3757#ifdef DEBUG_CONFIG_INFO
3758 printk(KERN_WARNING
3759 "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n",
3760 ioaddr, mac[0], mac[1], mac[2]);
3761#endif
3762 return -ENODEV;
3763}
3764
3765/************************ INTERRUPT HANDLING ************************/
3766
3767/*
3768 * This function is the interrupt handler for the WaveLAN card. This
3769 * routine will be called whenever:
3770 */
David Howells7d12e782006-10-05 14:55:46 +01003771static irqreturn_t wavelan_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003772{
3773 struct net_device *dev;
3774 unsigned long ioaddr;
3775 net_local *lp;
3776 u16 hasr;
3777 u16 status;
3778 u16 ack_cmd;
3779
3780 dev = dev_id;
3781
3782#ifdef DEBUG_INTERRUPT_TRACE
3783 printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
3784#endif
3785
3786 lp = (net_local *) dev->priv;
3787 ioaddr = dev->base_addr;
3788
3789#ifdef DEBUG_INTERRUPT_INFO
3790 /* Check state of our spinlock */
3791 if(spin_is_locked(&lp->spinlock))
3792 printk(KERN_DEBUG
3793 "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
3794 dev->name);
3795#endif
3796
3797 /* Prevent reentrancy. We need to do that because we may have
3798 * multiple interrupt handler running concurrently.
3799 * It is safe because interrupts are disabled before acquiring
3800 * the spinlock. */
3801 spin_lock(&lp->spinlock);
3802
3803 /* We always had spurious interrupts at startup, but lately I
3804 * saw them comming *between* the request_irq() and the
3805 * spin_lock_irqsave() in wavelan_open(), so the spinlock
3806 * protection is no enough.
3807 * So, we also check lp->hacr that will tell us is we enabled
3808 * irqs or not (see wv_ints_on()).
3809 * We can't use netif_running(dev) because we depend on the
3810 * proper processing of the irq generated during the config. */
3811
3812 /* Which interrupt it is ? */
3813 hasr = hasr_read(ioaddr);
3814
3815#ifdef DEBUG_INTERRUPT_INFO
3816 printk(KERN_INFO
3817 "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n",
3818 dev->name, hasr, lp->hacr);
3819#endif
3820
3821 /* Check modem interrupt */
3822 if ((hasr & HASR_MMC_INTR) && (lp->hacr & HACR_MMC_INT_ENABLE)) {
3823 u8 dce_status;
3824
3825 /*
3826 * Interrupt from the modem management controller.
3827 * This will clear it -- ignored for now.
3828 */
3829 mmc_read(ioaddr, mmroff(0, mmr_dce_status), &dce_status,
3830 sizeof(dce_status));
3831
3832#ifdef DEBUG_INTERRUPT_ERROR
3833 printk(KERN_INFO
3834 "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n",
3835 dev->name, dce_status);
3836#endif
3837 }
3838
3839 /* Check if not controller interrupt */
3840 if (((hasr & HASR_82586_INTR) == 0) ||
3841 ((lp->hacr & HACR_82586_INT_ENABLE) == 0)) {
3842#ifdef DEBUG_INTERRUPT_ERROR
3843 printk(KERN_INFO
3844 "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n",
3845 dev->name, hasr);
3846#endif
3847 spin_unlock (&lp->spinlock);
3848 return IRQ_NONE;
3849 }
3850
3851 /* Read interrupt data. */
3852 obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
3853 (unsigned char *) &status, sizeof(status));
3854
3855 /*
3856 * Acknowledge the interrupt(s).
3857 */
3858 ack_cmd = status & SCB_ST_INT;
3859 obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
3860 (unsigned char *) &ack_cmd, sizeof(ack_cmd));
3861 set_chan_attn(ioaddr, lp->hacr);
3862
3863#ifdef DEBUG_INTERRUPT_INFO
3864 printk(KERN_DEBUG "%s: wavelan_interrupt(): status 0x%04x.\n",
3865 dev->name, status);
3866#endif
3867
3868 /* Command completed. */
3869 if ((status & SCB_ST_CX) == SCB_ST_CX) {
3870#ifdef DEBUG_INTERRUPT_INFO
3871 printk(KERN_DEBUG
3872 "%s: wavelan_interrupt(): command completed.\n",
3873 dev->name);
3874#endif
3875 wv_complete(dev, ioaddr, lp);
3876 }
3877
3878 /* Frame received. */
3879 if ((status & SCB_ST_FR) == SCB_ST_FR) {
3880#ifdef DEBUG_INTERRUPT_INFO
3881 printk(KERN_DEBUG
3882 "%s: wavelan_interrupt(): received packet.\n",
3883 dev->name);
3884#endif
3885 wv_receive(dev);
3886 }
3887
3888 /* Check the state of the command unit. */
3889 if (((status & SCB_ST_CNA) == SCB_ST_CNA) ||
3890 (((status & SCB_ST_CUS) != SCB_ST_CUS_ACTV) &&
3891 (netif_running(dev)))) {
3892#ifdef DEBUG_INTERRUPT_ERROR
3893 printk(KERN_INFO
3894 "%s: wavelan_interrupt(): CU inactive -- restarting\n",
3895 dev->name);
3896#endif
3897 wv_hw_reset(dev);
3898 }
3899
3900 /* Check the state of the command unit. */
3901 if (((status & SCB_ST_RNR) == SCB_ST_RNR) ||
3902 (((status & SCB_ST_RUS) != SCB_ST_RUS_RDY) &&
3903 (netif_running(dev)))) {
3904#ifdef DEBUG_INTERRUPT_ERROR
3905 printk(KERN_INFO
3906 "%s: wavelan_interrupt(): RU not ready -- restarting\n",
3907 dev->name);
3908#endif
3909 wv_hw_reset(dev);
3910 }
3911
3912 /* Release spinlock */
3913 spin_unlock (&lp->spinlock);
3914
3915#ifdef DEBUG_INTERRUPT_TRACE
3916 printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
3917#endif
3918 return IRQ_HANDLED;
3919}
3920
3921/*------------------------------------------------------------------*/
3922/*
3923 * Watchdog: when we start a transmission, a timer is set for us in the
3924 * kernel. If the transmission completes, this timer is disabled. If
3925 * the timer expires, we are called and we try to unlock the hardware.
3926 */
3927static void wavelan_watchdog(struct net_device * dev)
3928{
3929 net_local * lp = (net_local *)dev->priv;
3930 u_long ioaddr = dev->base_addr;
3931 unsigned long flags;
3932 unsigned int nreaped;
3933
3934#ifdef DEBUG_INTERRUPT_TRACE
3935 printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
3936#endif
3937
3938#ifdef DEBUG_INTERRUPT_ERROR
3939 printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
3940 dev->name);
3941#endif
3942
3943 /* Check that we came here for something */
3944 if (lp->tx_n_in_use <= 0) {
3945 return;
3946 }
3947
3948 spin_lock_irqsave(&lp->spinlock, flags);
3949
3950 /* Try to see if some buffers are not free (in case we missed
3951 * an interrupt */
3952 nreaped = wv_complete(dev, ioaddr, lp);
3953
3954#ifdef DEBUG_INTERRUPT_INFO
3955 printk(KERN_DEBUG
3956 "%s: wavelan_watchdog(): %d reaped, %d remain.\n",
3957 dev->name, nreaped, lp->tx_n_in_use);
3958#endif
3959
3960#ifdef DEBUG_PSA_SHOW
3961 {
3962 psa_t psa;
3963 psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
3964 wv_psa_show(&psa);
3965 }
3966#endif
3967#ifdef DEBUG_MMC_SHOW
3968 wv_mmc_show(dev);
3969#endif
3970#ifdef DEBUG_I82586_SHOW
3971 wv_cu_show(dev);
3972#endif
3973
3974 /* If no buffer has been freed */
3975 if (nreaped == 0) {
3976#ifdef DEBUG_INTERRUPT_ERROR
3977 printk(KERN_INFO
3978 "%s: wavelan_watchdog(): cleanup failed, trying reset\n",
3979 dev->name);
3980#endif
3981 wv_hw_reset(dev);
3982 }
3983
3984 /* At this point, we should have some free Tx buffer ;-) */
3985 if (lp->tx_n_in_use < NTXBLOCKS - 1)
3986 netif_wake_queue(dev);
3987
3988 spin_unlock_irqrestore(&lp->spinlock, flags);
3989
3990#ifdef DEBUG_INTERRUPT_TRACE
3991 printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
3992#endif
3993}
3994
3995/********************* CONFIGURATION CALLBACKS *********************/
3996/*
3997 * Here are the functions called by the Linux networking code (NET3)
3998 * for initialization, configuration and deinstallations of the
3999 * WaveLAN ISA hardware.
4000 */
4001
4002/*------------------------------------------------------------------*/
4003/*
4004 * Configure and start up the WaveLAN PCMCIA adaptor.
4005 * Called by NET3 when it "opens" the device.
4006 */
4007static int wavelan_open(struct net_device * dev)
4008{
4009 net_local * lp = (net_local *)dev->priv;
4010 unsigned long flags;
4011
4012#ifdef DEBUG_CALLBACK_TRACE
4013 printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
4014 (unsigned int) dev);
4015#endif
4016
4017 /* Check irq */
4018 if (dev->irq == 0) {
4019#ifdef DEBUG_CONFIG_ERROR
4020 printk(KERN_WARNING "%s: wavelan_open(): no IRQ\n",
4021 dev->name);
4022#endif
4023 return -ENXIO;
4024 }
4025
4026 if (request_irq(dev->irq, &wavelan_interrupt, 0, "WaveLAN", dev) != 0)
4027 {
4028#ifdef DEBUG_CONFIG_ERROR
4029 printk(KERN_WARNING "%s: wavelan_open(): invalid IRQ\n",
4030 dev->name);
4031#endif
4032 return -EAGAIN;
4033 }
4034
4035 spin_lock_irqsave(&lp->spinlock, flags);
4036
4037 if (wv_hw_reset(dev) != -1) {
4038 netif_start_queue(dev);
4039 } else {
4040 free_irq(dev->irq, dev);
4041#ifdef DEBUG_CONFIG_ERROR
4042 printk(KERN_INFO
4043 "%s: wavelan_open(): impossible to start the card\n",
4044 dev->name);
4045#endif
4046 spin_unlock_irqrestore(&lp->spinlock, flags);
4047 return -EAGAIN;
4048 }
4049 spin_unlock_irqrestore(&lp->spinlock, flags);
4050
4051#ifdef DEBUG_CALLBACK_TRACE
4052 printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
4053#endif
4054 return 0;
4055}
4056
4057/*------------------------------------------------------------------*/
4058/*
4059 * Shut down the WaveLAN ISA card.
4060 * Called by NET3 when it "closes" the device.
4061 */
4062static int wavelan_close(struct net_device * dev)
4063{
4064 net_local *lp = (net_local *) dev->priv;
4065 unsigned long flags;
4066
4067#ifdef DEBUG_CALLBACK_TRACE
4068 printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
4069 (unsigned int) dev);
4070#endif
4071
4072 netif_stop_queue(dev);
4073
4074 /*
4075 * Flush the Tx and disable Rx.
4076 */
4077 spin_lock_irqsave(&lp->spinlock, flags);
4078 wv_82586_stop(dev);
4079 spin_unlock_irqrestore(&lp->spinlock, flags);
4080
4081 free_irq(dev->irq, dev);
4082
4083#ifdef DEBUG_CALLBACK_TRACE
4084 printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
4085#endif
4086 return 0;
4087}
4088
4089/*------------------------------------------------------------------*/
4090/*
4091 * Probe an I/O address, and if the WaveLAN is there configure the
4092 * device structure
4093 * (called by wavelan_probe() and via init_module()).
4094 */
4095static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
4096{
4097 u8 irq_mask;
4098 int irq;
4099 net_local *lp;
4100 mac_addr mac;
4101 int err;
4102
4103 if (!request_region(ioaddr, sizeof(ha_t), "wavelan"))
4104 return -EADDRINUSE;
4105
4106 err = wv_check_ioaddr(ioaddr, mac);
4107 if (err)
4108 goto out;
4109
4110 memcpy(dev->dev_addr, mac, 6);
4111
4112 dev->base_addr = ioaddr;
4113
4114#ifdef DEBUG_CALLBACK_TRACE
4115 printk(KERN_DEBUG "%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n",
4116 dev->name, (unsigned int) dev, ioaddr);
4117#endif
4118
4119 /* Check IRQ argument on command line. */
4120 if (dev->irq != 0) {
4121 irq_mask = wv_irq_to_psa(dev->irq);
4122
4123 if (irq_mask == 0) {
4124#ifdef DEBUG_CONFIG_ERROR
4125 printk(KERN_WARNING
4126 "%s: wavelan_config(): invalid IRQ %d ignored.\n",
4127 dev->name, dev->irq);
4128#endif
4129 dev->irq = 0;
4130 } else {
4131#ifdef DEBUG_CONFIG_INFO
4132 printk(KERN_DEBUG
4133 "%s: wavelan_config(): changing IRQ to %d\n",
4134 dev->name, dev->irq);
4135#endif
4136 psa_write(ioaddr, HACR_DEFAULT,
4137 psaoff(0, psa_int_req_no), &irq_mask, 1);
4138 /* update the Wavelan checksum */
4139 update_psa_checksum(dev, ioaddr, HACR_DEFAULT);
4140 wv_hacr_reset(ioaddr);
4141 }
4142 }
4143
4144 psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_int_req_no),
4145 &irq_mask, 1);
4146 if ((irq = wv_psa_to_irq(irq_mask)) == -1) {
4147#ifdef DEBUG_CONFIG_ERROR
4148 printk(KERN_INFO
4149 "%s: wavelan_config(): could not wavelan_map_irq(%d).\n",
4150 dev->name, irq_mask);
4151#endif
4152 err = -EAGAIN;
4153 goto out;
4154 }
4155
4156 dev->irq = irq;
4157
4158 dev->mem_start = 0x0000;
4159 dev->mem_end = 0x0000;
4160 dev->if_port = 0;
4161
4162 /* Initialize device structures */
4163 memset(dev->priv, 0, sizeof(net_local));
4164 lp = (net_local *) dev->priv;
4165
4166 /* Back link to the device structure. */
4167 lp->dev = dev;
4168 /* Add the device at the beginning of the linked list. */
4169 lp->next = wavelan_list;
4170 wavelan_list = lp;
4171
4172 lp->hacr = HACR_DEFAULT;
4173
4174 /* Multicast stuff */
4175 lp->promiscuous = 0;
4176 lp->mc_count = 0;
4177
4178 /* Init spinlock */
4179 spin_lock_init(&lp->spinlock);
4180
4181 SET_MODULE_OWNER(dev);
4182 dev->open = wavelan_open;
4183 dev->stop = wavelan_close;
4184 dev->hard_start_xmit = wavelan_packet_xmit;
4185 dev->get_stats = wavelan_get_stats;
4186 dev->set_multicast_list = &wavelan_set_multicast_list;
4187 dev->tx_timeout = &wavelan_watchdog;
4188 dev->watchdog_timeo = WATCHDOG_JIFFIES;
4189#ifdef SET_MAC_ADDRESS
4190 dev->set_mac_address = &wavelan_set_mac_address;
4191#endif /* SET_MAC_ADDRESS */
4192
Linus Torvalds1da177e2005-04-16 15:20:36 -07004193 dev->wireless_handlers = &wavelan_handler_def;
4194 lp->wireless_data.spy_data = &lp->spy_data;
4195 dev->wireless_data = &lp->wireless_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004196
4197 dev->mtu = WAVELAN_MTU;
4198
4199 /* Display nice information. */
4200 wv_init_info(dev);
4201
4202#ifdef DEBUG_CALLBACK_TRACE
4203 printk(KERN_DEBUG "%s: <-wavelan_config()\n", dev->name);
4204#endif
4205 return 0;
4206out:
4207 release_region(ioaddr, sizeof(ha_t));
4208 return err;
4209}
4210
4211/*------------------------------------------------------------------*/
4212/*
4213 * Check for a network adaptor of this type. Return '0' iff one
4214 * exists. There seem to be different interpretations of
4215 * the initial value of dev->base_addr.
4216 * We follow the example in drivers/net/ne.c.
4217 * (called in "Space.c")
4218 */
4219struct net_device * __init wavelan_probe(int unit)
4220{
4221 struct net_device *dev;
4222 short base_addr;
4223 int def_irq;
4224 int i;
4225 int r = 0;
4226
4227#ifdef STRUCT_CHECK
4228 if (wv_struct_check() != (char *) NULL) {
4229 printk(KERN_WARNING
4230 "%s: wavelan_probe(): structure/compiler botch: \"%s\"\n",
4231 dev->name, wv_struct_check());
4232 return -ENODEV;
4233 }
4234#endif /* STRUCT_CHECK */
4235
4236 dev = alloc_etherdev(sizeof(net_local));
4237 if (!dev)
4238 return ERR_PTR(-ENOMEM);
4239
4240 sprintf(dev->name, "eth%d", unit);
4241 netdev_boot_setup_check(dev);
4242 base_addr = dev->base_addr;
4243 def_irq = dev->irq;
4244
4245#ifdef DEBUG_CALLBACK_TRACE
4246 printk(KERN_DEBUG
4247 "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n",
4248 dev->name, dev, (unsigned int) dev->base_addr);
4249#endif
4250
4251 /* Don't probe at all. */
4252 if (base_addr < 0) {
4253#ifdef DEBUG_CONFIG_ERROR
4254 printk(KERN_WARNING
4255 "%s: wavelan_probe(): invalid base address\n",
4256 dev->name);
4257#endif
4258 r = -ENXIO;
4259 } else if (base_addr > 0x100) { /* Check a single specified location. */
4260 r = wavelan_config(dev, base_addr);
4261#ifdef DEBUG_CONFIG_INFO
4262 if (r != 0)
4263 printk(KERN_DEBUG
4264 "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n",
4265 dev->name, base_addr);
4266#endif
4267
4268#ifdef DEBUG_CALLBACK_TRACE
4269 printk(KERN_DEBUG "%s: <-wavelan_probe()\n", dev->name);
4270#endif
4271 } else { /* Scan all possible addresses of the WaveLAN hardware. */
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +02004272 for (i = 0; i < ARRAY_SIZE(iobase); i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004273 dev->irq = def_irq;
4274 if (wavelan_config(dev, iobase[i]) == 0) {
4275#ifdef DEBUG_CALLBACK_TRACE
4276 printk(KERN_DEBUG
4277 "%s: <-wavelan_probe()\n",
4278 dev->name);
4279#endif
4280 break;
4281 }
4282 }
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +02004283 if (i == ARRAY_SIZE(iobase))
Linus Torvalds1da177e2005-04-16 15:20:36 -07004284 r = -ENODEV;
4285 }
4286 if (r)
4287 goto out;
4288 r = register_netdev(dev);
4289 if (r)
4290 goto out1;
4291 return dev;
4292out1:
4293 release_region(dev->base_addr, sizeof(ha_t));
4294 wavelan_list = wavelan_list->next;
4295out:
4296 free_netdev(dev);
4297 return ERR_PTR(r);
4298}
4299
4300/****************************** MODULE ******************************/
4301/*
4302 * Module entry point: insertion and removal
4303 */
4304
4305#ifdef MODULE
4306/*------------------------------------------------------------------*/
4307/*
4308 * Insertion of the module
4309 * I'm now quite proud of the multi-device support.
4310 */
Randy Dunlap53072d62006-05-25 11:09:21 -07004311int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004312{
4313 int ret = -EIO; /* Return error if no cards found */
4314 int i;
4315
4316#ifdef DEBUG_MODULE_TRACE
4317 printk(KERN_DEBUG "-> init_module()\n");
4318#endif
4319
4320 /* If probing is asked */
4321 if (io[0] == 0) {
4322#ifdef DEBUG_CONFIG_ERROR
4323 printk(KERN_WARNING
4324 "WaveLAN init_module(): doing device probing (bad !)\n");
4325 printk(KERN_WARNING
4326 "Specify base addresses while loading module to correct the problem\n");
4327#endif
4328
4329 /* Copy the basic set of address to be probed. */
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +02004330 for (i = 0; i < ARRAY_SIZE(iobase); i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004331 io[i] = iobase[i];
4332 }
4333
4334
4335 /* Loop on all possible base addresses. */
4336 i = -1;
Ahmed S. Darwish0a92dd02007-02-06 11:34:54 +02004337 while ((io[++i] != 0) && (i < ARRAY_SIZE(io))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004338 struct net_device *dev = alloc_etherdev(sizeof(net_local));
4339 if (!dev)
4340 break;
4341 if (name[i])
4342 strcpy(dev->name, name[i]); /* Copy name */
4343 dev->base_addr = io[i];
4344 dev->irq = irq[i];
4345
4346 /* Check if there is something at this base address. */
4347 if (wavelan_config(dev, io[i]) == 0) {
4348 if (register_netdev(dev) != 0) {
4349 release_region(dev->base_addr, sizeof(ha_t));
4350 wavelan_list = wavelan_list->next;
4351 } else {
4352 ret = 0;
4353 continue;
4354 }
4355 }
4356 free_netdev(dev);
4357 }
4358
4359#ifdef DEBUG_CONFIG_ERROR
4360 if (!wavelan_list)
4361 printk(KERN_WARNING
4362 "WaveLAN init_module(): no device found\n");
4363#endif
4364
4365#ifdef DEBUG_MODULE_TRACE
4366 printk(KERN_DEBUG "<- init_module()\n");
4367#endif
4368 return ret;
4369}
4370
4371/*------------------------------------------------------------------*/
4372/*
4373 * Removal of the module
4374 */
4375void cleanup_module(void)
4376{
4377#ifdef DEBUG_MODULE_TRACE
4378 printk(KERN_DEBUG "-> cleanup_module()\n");
4379#endif
4380
4381 /* Loop on all devices and release them. */
4382 while (wavelan_list) {
4383 struct net_device *dev = wavelan_list->dev;
4384
4385#ifdef DEBUG_CONFIG_INFO
4386 printk(KERN_DEBUG
4387 "%s: cleanup_module(): removing device at 0x%x\n",
4388 dev->name, (unsigned int) dev);
4389#endif
4390 unregister_netdev(dev);
4391
4392 release_region(dev->base_addr, sizeof(ha_t));
4393 wavelan_list = wavelan_list->next;
4394
4395 free_netdev(dev);
4396 }
4397
4398#ifdef DEBUG_MODULE_TRACE
4399 printk(KERN_DEBUG "<- cleanup_module()\n");
4400#endif
4401}
4402#endif /* MODULE */
4403MODULE_LICENSE("GPL");
4404
4405/*
4406 * This software may only be used and distributed
4407 * according to the terms of the GNU General Public License.
4408 *
4409 * This software was developed as a component of the
4410 * Linux operating system.
4411 * It is based on other device drivers and information
4412 * either written or supplied by:
4413 * Ajay Bakre (bakre@paul.rutgers.edu),
4414 * Donald Becker (becker@scyld.com),
4415 * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com),
4416 * Anders Klemets (klemets@it.kth.se),
4417 * Vladimir V. Kolpakov (w@stier.koenig.ru),
4418 * Marc Meertens (Marc.Meertens@Utrecht.NCR.com),
4419 * Pauline Middelink (middelin@polyware.iaf.nl),
4420 * Robert Morris (rtm@das.harvard.edu),
4421 * Jean Tourrilhes (jt@hplb.hpl.hp.com),
4422 * Girish Welling (welling@paul.rutgers.edu),
4423 *
4424 * Thanks go also to:
4425 * James Ashton (jaa101@syseng.anu.edu.au),
4426 * Alan Cox (alan@redhat.com),
4427 * Allan Creighton (allanc@cs.usyd.edu.au),
4428 * Matthew Geier (matthew@cs.usyd.edu.au),
4429 * Remo di Giovanni (remo@cs.usyd.edu.au),
4430 * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de),
4431 * Vipul Gupta (vgupta@cs.binghamton.edu),
4432 * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
4433 * Tim Nicholson (tim@cs.usyd.edu.au),
4434 * Ian Parkin (ian@cs.usyd.edu.au),
4435 * John Rosenberg (johnr@cs.usyd.edu.au),
4436 * George Rossi (george@phm.gov.au),
4437 * Arthur Scott (arthur@cs.usyd.edu.au),
4438 * Peter Storey,
4439 * for their assistance and advice.
4440 *
4441 * Please send bug reports, updates, comments to:
4442 *
4443 * Bruce Janson Email: bruce@cs.usyd.edu.au
4444 * Basser Department of Computer Science Phone: +61-2-9351-3423
4445 * University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838
4446 */