Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 0ae53b5c43c8e51d3990b1e0b30940f157384882 / . / arch / arm64 / boot / dts / qcom / msm8937-camera-sensor-mtp.dtsi
blob: e7a582213680d224b8baf678efbbfce70300a9b6 [file] [log] [blame]
Vijay kumar Tumati0ae53b52018-03-06 15:24:25 +0530[diff] [blame^]1/*
2 * Copyright (c) 2015-2016, 2018, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14&cci {
15 actuator0: qcom,actuator@0 {
16 cell-index = <0>;
17 reg = <0x0>;
18 compatible = "qcom,actuator";
19 qcom,cci-master = <0>;
20 cam_vaf-supply = <&pm8937_l17>;
21 qcom,cam-vreg-name = "cam_vaf";
22 qcom,cam-vreg-min-voltage = <2850000>;
23 qcom,cam-vreg-max-voltage = <2850000>;
24 qcom,cam-vreg-op-mode = <80000>;
25 };
26
27 actuator1: qcom,actuator@1 {
28 cell-index = <1>;
29 reg = <0x1>;
30 compatible = "qcom,actuator";
31 qcom,cci-master = <0>;
32 cam_vaf-supply = <&pm8937_l17>;
33 qcom,cam-vreg-name = "cam_vaf";
34 qcom,cam-vreg-min-voltage = <2850000>;
35 qcom,cam-vreg-max-voltage = <2850000>;
36 qcom,cam-vreg-op-mode = <80000>;
37 };
38
39 eeprom0: qcom,eeprom@0 {
40 cell-index = <0>;
41 compatible = "qcom,eeprom";
42 qcom,cci-master = <0>;
43 reg = <0x0>;
44 cam_vdig-supply = <&pm8937_l23>;
45 cam_vana-supply = <&pm8937_l22>;
46 cam_vio-supply = <&pm8937_l6>;
47 cam_vaf-supply = <&pm8937_l17>;
48 qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio",
49 "cam_vaf";
50 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
51 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
52 qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
53 pinctrl-names = "cam_default", "cam_suspend";
54 pinctrl-0 = <&cam_sensor_mclk0_default
55 &cam_sensor_rear_default>;
56 pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
57 gpios = <&tlmm 26 0>,
58 <&tlmm 36 0>,
59 <&tlmm 35 0>;
60 qcom,gpio-reset = <1>;
61 qcom,gpio-standby = <2>;
62 qcom,gpio-req-tbl-num = <0 1 2>;
63 qcom,gpio-req-tbl-flags = <1 0 0>;
64 qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
65 "CAM_RESET0",
66 "CAM_STANDBY0";
67 status = "ok";
68 clocks = <&clock_gcc clk_mclk0_clk_src>,
69 <&clock_gcc clk_gcc_camss_mclk0_clk>;
70 clock-names = "cam_src_clk", "cam_clk";
71 qcom,clock-rates = <19200000 0>;
72 };
73
74 eeprom1: qcom,eeprom@1 {
75 cell-index = <1>;
76 reg = <0x1>;
77 qcom,eeprom-name = "sunny_8865";
78 compatible = "qcom,eeprom";
79 qcom,slave-addr = <0x6c>;
80 qcom,cci-master = <0>;
81 qcom,num-blocks = <8>;
82
83 qcom,page0 = <1 0x0100 2 0x01 1 1>;
84 qcom,poll0 = <0 0x0 2 0x0 1 0>;
85 qcom,mem0 = <0 0x0 2 0x0 1 0>;
86
87 qcom,page1 = <1 0x5002 2 0x00 1 0>;
88 qcom,poll1 = <0 0x0 2 0x0 1 0>;
89 qcom,mem1 = <0 0x0 2 0x0 1 0>;
90
91 qcom,page2 = <1 0x3d84 2 0xc0 1 0>;
92 qcom,poll2 = <0 0x0 2 0x0 1 0>;
93 qcom,mem2 = <0 0x0 2 0x0 1 0>;
94
95 qcom,page3 = <1 0x3d88 2 0x70 1 0>;
96 qcom,poll3 = <0 0x0 2 0x0 1 0>;
97 qcom,mem3 = <0 0x0 2 0x0 1 0>;
98
99 qcom,page4 = <1 0x3d89 2 0x10 1 0>;
100 qcom,poll4 = <0 0x0 2 0x0 1 0>;
101 qcom,mem4 = <0 0x0 2 0x0 1 0>;
102
103 qcom,page5 = <1 0x3d8a 2 0x70 1 0>;
104 qcom,poll5 = <0 0x0 2 0x0 1 0>;
105 qcom,mem5 = <0 0x0 2 0x0 1 0>;
106
107 qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;
108 qcom,poll6 = <0 0x0 2 0x0 1 0>;
109 qcom,mem6 = <0 0x0 2 0x0 1 0>;
110
111 qcom,page7 = <1 0x3d81 2 0x01 1 10>;
112 qcom,poll7 = <0 0x0 2 0x0 1 1>;
113 qcom,mem7 = <1536 0x7010 2 0 1 0>;
114
115 cam_vdig-supply = <&pm8937_l23>;
116 cam_vana-supply = <&pm8937_l22>;
117 cam_vio-supply = <&pm8937_l6>;
118 cam_vaf-supply = <&pm8937_l17>;
119 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
120 "cam_vaf";
121 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
122 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
123 qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
124 qcom,gpio-no-mux = <0>;
125 pinctrl-names = "cam_default", "cam_suspend";
126 pinctrl-0 = <&cam_sensor_mclk2_default
127 &cam_sensor_front1_default>;
128 pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;
129 gpios = <&tlmm 28 0>,
130 <&tlmm 40 0>,
131 <&tlmm 39 0>;
132 qcom,gpio-reset = <1>;
133 qcom,gpio-standby = <2>;
134 qcom,gpio-req-tbl-num = <0 1 2>;
135 qcom,gpio-req-tbl-flags = <1 0 0>;
136 qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
137 "CAM_RESET2",
138 "CAM_STANDBY2";
139 qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",
140 "sensor_vreg",
141 "sensor_gpio", "sensor_gpio" , "sensor_clk";
142 qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",
143 "sensor_gpio_reset", "sensor_gpio_standby",
144 "sensor_cam_mclk";
145 qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
146 qcom,cam-power-seq-delay = <1 1 1 30 30 5>;
147 status = "ok";
148 clocks = <&clock_gcc clk_mclk2_clk_src>,
149 <&clock_gcc clk_gcc_camss_mclk2_clk>;
150 clock-names = "cam_src_clk", "cam_clk";
151 qcom,clock-rates = <19200000 0>;
152 };
153
154 qcom,camera@0 {
155 cell-index = <0>;
156 compatible = "qcom,camera";
157 reg = <0x0>;
158 qcom,csiphy-sd-index = <0>;
159 qcom,csid-sd-index = <0>;
160 qcom,mount-angle = <270>;
161 qcom,led-flash-src = <&led_flash0>;
162 qcom,eeprom-src = <&eeprom0>;
163 qcom,actuator-src = <&actuator0>;
164 cam_vana-supply = <&pm8937_l22>;
165 cam_vio-supply = <&pm8937_l6>;
166 cam_vaf-supply = <&pm8937_l17>;
167 qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
168 qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
169 qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
170 qcom,cam-vreg-op-mode = <0 80000 100000>;
171 pinctrl-names = "cam_default", "cam_suspend";
172 pinctrl-0 = <&cam_sensor_mclk0_default
173 &cam_sensor_rear_default
174 &cam_sensor_rear_vdig>;
175 pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
176 &cam_sensor_rear_vdig_sleep>;
177 gpios = <&tlmm 26 0>,
178 <&tlmm 36 0>,
179 <&tlmm 35 0>,
180 <&tlmm 62 0>;
181 qcom,gpio-reset = <1>;
182 qcom,gpio-standby = <2>;
183 qcom,gpio-vdig = <3>;
184 qcom,gpio-req-tbl-num = <0 1 2 3>;
185 qcom,gpio-req-tbl-flags = <1 0 0 0>;
186 qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
187 "CAM_RESET0",
188 "CAM_STANDBY0",
189 "CAM_VDIG";
190 qcom,sensor-position = <0>;
191 qcom,sensor-mode = <0>;
192 qcom,cci-master = <0>;
193 status = "ok";
194 clocks = <&clock_gcc clk_mclk0_clk_src>,
195 <&clock_gcc clk_gcc_camss_mclk0_clk>;
196 clock-names = "cam_src_clk", "cam_clk";
197 qcom,clock-rates = <24000000 0>;
198 };
199
200 qcom,camera@1 {
201 cell-index = <1>;
202 compatible = "qcom,camera";
203 reg = <0x1>;
204 qcom,csiphy-sd-index = <1>;
205 qcom,csid-sd-index = <1>;
206 qcom,mount-angle = <90>;
207 cam_vdig-supply = <&pm8937_l23>;
208 cam_vana-supply = <&pm8937_l22>;
209 cam_vio-supply = <&pm8937_l6>;
210 cam_vaf-supply = <&pm8937_l17>;
211 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
212 "cam_vaf";
213 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
214 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
215 qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
216 pinctrl-names = "cam_default", "cam_suspend";
217 pinctrl-0 = <&cam_sensor_mclk1_default
218 &cam_sensor_front_default>;
219 pinctrl-1 = <&cam_sensor_mclk1_sleep
220 &cam_sensor_front_sleep>;
221 gpios = <&tlmm 27 0>,
222 <&tlmm 38 0>,
223 <&tlmm 50 0>;
224 qcom,gpio-reset = <1>;
225 qcom,gpio-standby = <2>;
226 qcom,gpio-req-tbl-num = <0 1 2>;
227 qcom,gpio-req-tbl-flags = <1 0 0>;
228 qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
229 "CAM_RESET1",
230 "CAM_STANDBY1";
231 qcom,sensor-position = <0x100>;
232 qcom,sensor-mode = <1>;
233 qcom,cci-master = <1>;
234 clocks = <&clock_gcc clk_mclk1_clk_src>,
235 <&clock_gcc clk_gcc_camss_mclk1_clk>;
236 clock-names = "cam_src_clk", "cam_clk";
237 qcom,clock-rates = <24000000 0>;
238 };
239
240 qcom,camera@2 {
241 cell-index = <2>;
242 compatible = "qcom,camera";
243 reg = <0x02>;
244 qcom,csiphy-sd-index = <1>;
245 qcom,csid-sd-index = <1>;
246 qcom,mount-angle = <90>;
247 qcom,eeprom-src = <&eeprom1>;
248 qcom,actuator-src = <&actuator1>;
249 cam_vdig-supply = <&pm8937_l23>;
250 cam_vana-supply = <&pm8937_l22>;
251 cam_vio-supply = <&pm8937_l6>;
252 cam_vaf-supply = <&pm8937_l17>;
253 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
254 "cam_vaf";
255 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
256 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
257 qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
258 qcom,gpio-no-mux = <0>;
259 pinctrl-names = "cam_default", "cam_suspend";
260 pinctrl-0 = <&cam_sensor_mclk2_default
261 &cam_sensor_front1_default>;
262 pinctrl-1 = <&cam_sensor_mclk2_sleep
263 &cam_sensor_front1_sleep>;
264 gpios = <&tlmm 28 0>,
265 <&tlmm 40 0>,
266 <&tlmm 39 0>;
267 qcom,gpio-reset = <1>;
268 qcom,gpio-standby = <2>;
269 qcom,gpio-req-tbl-num = <0 1 2>;
270 qcom,gpio-req-tbl-flags = <1 0 0>;
271 qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
272 "CAM_RESET2",
273 "CAM_STANDBY2";
274 qcom,sensor-position = <1>;
275 qcom,sensor-mode = <0>;
276 qcom,cci-master = <0>;
277 status = "ok";
278 clocks = <&clock_gcc clk_mclk2_clk_src>,
279 <&clock_gcc clk_gcc_camss_mclk2_clk>;
280 clock-names = "cam_src_clk", "cam_clk";
281 qcom,clock-rates = <24000000 0>;
282 };
283};