Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Standard PCI Hot Plug Driver |
| 3 | * |
| 4 | * Copyright (C) 1995,2001 Compaq Computer Corporation |
| 5 | * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| 6 | * Copyright (C) 2001 IBM Corp. |
| 7 | * Copyright (C) 2003-2004 Intel Corporation |
| 8 | * |
| 9 | * All rights reserved. |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License as published by |
| 13 | * the Free Software Foundation; either version 2 of the License, or (at |
| 14 | * your option) any later version. |
| 15 | * |
| 16 | * This program is distributed in the hope that it will be useful, but |
| 17 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| 19 | * NON INFRINGEMENT. See the GNU General Public License for more |
| 20 | * details. |
| 21 | * |
| 22 | * You should have received a copy of the GNU General Public License |
| 23 | * along with this program; if not, write to the Free Software |
| 24 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 25 | * |
| 26 | * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> |
| 27 | * |
| 28 | */ |
| 29 | |
| 30 | #include <linux/config.h> |
| 31 | #include <linux/kernel.h> |
| 32 | #include <linux/module.h> |
| 33 | #include <linux/types.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/vmalloc.h> |
| 36 | #include <linux/interrupt.h> |
| 37 | #include <linux/spinlock.h> |
| 38 | #include <linux/delay.h> |
| 39 | #include <linux/pci.h> |
| 40 | #include <asm/system.h> |
| 41 | #include "shpchp.h" |
| 42 | |
| 43 | #ifdef DEBUG |
| 44 | #define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */ |
| 45 | #define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */ |
| 46 | #define DBG_K_INFO ((unsigned int)0x00000004) /* Info messages */ |
| 47 | #define DBG_K_ERROR ((unsigned int)0x00000008) /* Error messages */ |
| 48 | #define DBG_K_TRACE (DBG_K_TRACE_ENTRY|DBG_K_TRACE_EXIT) |
| 49 | #define DBG_K_STANDARD (DBG_K_INFO|DBG_K_ERROR|DBG_K_TRACE) |
| 50 | /* Redefine this flagword to set debug level */ |
| 51 | #define DEBUG_LEVEL DBG_K_STANDARD |
| 52 | |
| 53 | #define DEFINE_DBG_BUFFER char __dbg_str_buf[256]; |
| 54 | |
| 55 | #define DBG_PRINT( dbg_flags, args... ) \ |
| 56 | do { \ |
| 57 | if ( DEBUG_LEVEL & ( dbg_flags ) ) \ |
| 58 | { \ |
| 59 | int len; \ |
| 60 | len = sprintf( __dbg_str_buf, "%s:%d: %s: ", \ |
| 61 | __FILE__, __LINE__, __FUNCTION__ ); \ |
| 62 | sprintf( __dbg_str_buf + len, args ); \ |
| 63 | printk( KERN_NOTICE "%s\n", __dbg_str_buf ); \ |
| 64 | } \ |
| 65 | } while (0) |
| 66 | |
| 67 | #define DBG_ENTER_ROUTINE DBG_PRINT (DBG_K_TRACE_ENTRY, "%s", "[Entry]"); |
| 68 | #define DBG_LEAVE_ROUTINE DBG_PRINT (DBG_K_TRACE_EXIT, "%s", "[Exit]"); |
| 69 | #else |
| 70 | #define DEFINE_DBG_BUFFER |
| 71 | #define DBG_ENTER_ROUTINE |
| 72 | #define DBG_LEAVE_ROUTINE |
| 73 | #endif /* DEBUG */ |
| 74 | |
| 75 | /* Slot Available Register I field definition */ |
| 76 | #define SLOT_33MHZ 0x0000001f |
| 77 | #define SLOT_66MHZ_PCIX 0x00001f00 |
| 78 | #define SLOT_100MHZ_PCIX 0x001f0000 |
| 79 | #define SLOT_133MHZ_PCIX 0x1f000000 |
| 80 | |
| 81 | /* Slot Available Register II field definition */ |
| 82 | #define SLOT_66MHZ 0x0000001f |
| 83 | #define SLOT_66MHZ_PCIX_266 0x00000f00 |
| 84 | #define SLOT_100MHZ_PCIX_266 0x0000f000 |
| 85 | #define SLOT_133MHZ_PCIX_266 0x000f0000 |
| 86 | #define SLOT_66MHZ_PCIX_533 0x00f00000 |
| 87 | #define SLOT_100MHZ_PCIX_533 0x0f000000 |
| 88 | #define SLOT_133MHZ_PCIX_533 0xf0000000 |
| 89 | |
| 90 | |
| 91 | /* Secondary Bus Configuration Register */ |
| 92 | /* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */ |
| 93 | #define PCI_33MHZ 0x0 |
| 94 | #define PCI_66MHZ 0x1 |
| 95 | #define PCIX_66MHZ 0x2 |
| 96 | #define PCIX_100MHZ 0x3 |
| 97 | #define PCIX_133MHZ 0x4 |
| 98 | |
| 99 | /* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */ |
| 100 | #define PCI_33MHZ 0x0 |
| 101 | #define PCI_66MHZ 0x1 |
| 102 | #define PCIX_66MHZ 0x2 |
| 103 | #define PCIX_100MHZ 0x3 |
| 104 | #define PCIX_133MHZ 0x4 |
| 105 | #define PCIX_66MHZ_ECC 0x5 |
| 106 | #define PCIX_100MHZ_ECC 0x6 |
| 107 | #define PCIX_133MHZ_ECC 0x7 |
| 108 | #define PCIX_66MHZ_266 0x9 |
| 109 | #define PCIX_100MHZ_266 0xa |
| 110 | #define PCIX_133MHZ_266 0xb |
| 111 | #define PCIX_66MHZ_533 0x11 |
| 112 | #define PCIX_100MHZ_533 0x12 |
| 113 | #define PCIX_133MHZ_533 0x13 |
| 114 | |
| 115 | /* Slot Configuration */ |
| 116 | #define SLOT_NUM 0x0000001F |
| 117 | #define FIRST_DEV_NUM 0x00001F00 |
| 118 | #define PSN 0x07FF0000 |
| 119 | #define UPDOWN 0x20000000 |
| 120 | #define MRLSENSOR 0x40000000 |
| 121 | #define ATTN_BUTTON 0x80000000 |
| 122 | |
| 123 | /* Slot Status Field Definitions */ |
| 124 | /* Slot State */ |
| 125 | #define PWR_ONLY 0x0001 |
| 126 | #define ENABLED 0x0002 |
| 127 | #define DISABLED 0x0003 |
| 128 | |
| 129 | /* Power Indicator State */ |
| 130 | #define PWR_LED_ON 0x0004 |
| 131 | #define PWR_LED_BLINK 0x0008 |
| 132 | #define PWR_LED_OFF 0x000c |
| 133 | |
| 134 | /* Attention Indicator State */ |
| 135 | #define ATTEN_LED_ON 0x0010 |
| 136 | #define ATTEN_LED_BLINK 0x0020 |
| 137 | #define ATTEN_LED_OFF 0x0030 |
| 138 | |
| 139 | /* Power Fault */ |
| 140 | #define pwr_fault 0x0040 |
| 141 | |
| 142 | /* Attention Button */ |
| 143 | #define ATTEN_BUTTON 0x0080 |
| 144 | |
| 145 | /* MRL Sensor */ |
| 146 | #define MRL_SENSOR 0x0100 |
| 147 | |
| 148 | /* 66 MHz Capable */ |
| 149 | #define IS_66MHZ_CAP 0x0200 |
| 150 | |
| 151 | /* PRSNT1#/PRSNT2# */ |
| 152 | #define SLOT_EMP 0x0c00 |
| 153 | |
| 154 | /* PCI-X Capability */ |
| 155 | #define NON_PCIX 0x0000 |
| 156 | #define PCIX_66 0x1000 |
| 157 | #define PCIX_133 0x3000 |
| 158 | #define PCIX_266 0x4000 /* For PI = 2 only */ |
| 159 | #define PCIX_533 0x5000 /* For PI = 2 only */ |
| 160 | |
| 161 | /* SHPC 'write' operations/commands */ |
| 162 | |
| 163 | /* Slot operation - 0x00h to 0x3Fh */ |
| 164 | |
| 165 | #define NO_CHANGE 0x00 |
| 166 | |
| 167 | /* Slot state - Bits 0 & 1 of controller command register */ |
| 168 | #define SET_SLOT_PWR 0x01 |
| 169 | #define SET_SLOT_ENABLE 0x02 |
| 170 | #define SET_SLOT_DISABLE 0x03 |
| 171 | |
| 172 | /* Power indicator state - Bits 2 & 3 of controller command register*/ |
| 173 | #define SET_PWR_ON 0x04 |
| 174 | #define SET_PWR_BLINK 0x08 |
| 175 | #define SET_PWR_OFF 0x0C |
| 176 | |
| 177 | /* Attention indicator state - Bits 4 & 5 of controller command register*/ |
| 178 | #define SET_ATTN_ON 0x010 |
| 179 | #define SET_ATTN_BLINK 0x020 |
| 180 | #define SET_ATTN_OFF 0x030 |
| 181 | |
| 182 | /* Set bus speed/mode A - 0x40h to 0x47h */ |
| 183 | #define SETA_PCI_33MHZ 0x40 |
| 184 | #define SETA_PCI_66MHZ 0x41 |
| 185 | #define SETA_PCIX_66MHZ 0x42 |
| 186 | #define SETA_PCIX_100MHZ 0x43 |
| 187 | #define SETA_PCIX_133MHZ 0x44 |
| 188 | #define RESERV_1 0x45 |
| 189 | #define RESERV_2 0x46 |
| 190 | #define RESERV_3 0x47 |
| 191 | |
| 192 | /* Set bus speed/mode B - 0x50h to 0x5fh */ |
| 193 | #define SETB_PCI_33MHZ 0x50 |
| 194 | #define SETB_PCI_66MHZ 0x51 |
| 195 | #define SETB_PCIX_66MHZ_PM 0x52 |
| 196 | #define SETB_PCIX_100MHZ_PM 0x53 |
| 197 | #define SETB_PCIX_133MHZ_PM 0x54 |
| 198 | #define SETB_PCIX_66MHZ_EM 0x55 |
| 199 | #define SETB_PCIX_100MHZ_EM 0x56 |
| 200 | #define SETB_PCIX_133MHZ_EM 0x57 |
| 201 | #define SETB_PCIX_66MHZ_266 0x58 |
| 202 | #define SETB_PCIX_100MHZ_266 0x59 |
| 203 | #define SETB_PCIX_133MHZ_266 0x5a |
| 204 | #define SETB_PCIX_66MHZ_533 0x5b |
| 205 | #define SETB_PCIX_100MHZ_533 0x5c |
| 206 | #define SETB_PCIX_133MHZ_533 0x5d |
| 207 | |
| 208 | |
| 209 | /* Power-on all slots - 0x48h */ |
| 210 | #define SET_PWR_ON_ALL 0x48 |
| 211 | |
| 212 | /* Enable all slots - 0x49h */ |
| 213 | #define SET_ENABLE_ALL 0x49 |
| 214 | |
| 215 | /* SHPC controller command error code */ |
| 216 | #define SWITCH_OPEN 0x1 |
| 217 | #define INVALID_CMD 0x2 |
| 218 | #define INVALID_SPEED_MODE 0x4 |
| 219 | |
| 220 | /* For accessing SHPC Working Register Set */ |
| 221 | #define DWORD_SELECT 0x2 |
| 222 | #define DWORD_DATA 0x4 |
| 223 | #define BASE_OFFSET 0x0 |
| 224 | |
| 225 | /* Field Offset in Logical Slot Register - byte boundary */ |
| 226 | #define SLOT_EVENT_LATCH 0x2 |
| 227 | #define SLOT_SERR_INT_MASK 0x3 |
| 228 | |
| 229 | static spinlock_t hpc_event_lock; |
| 230 | |
| 231 | DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */ |
| 232 | static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */ |
| 233 | static int ctlr_seq_num = 0; /* Controller sequenc # */ |
| 234 | static spinlock_t list_lock; |
| 235 | |
| 236 | static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs); |
| 237 | |
| 238 | static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds); |
| 239 | |
| 240 | /* This is the interrupt polling timeout function. */ |
| 241 | static void int_poll_timeout(unsigned long lphp_ctlr) |
| 242 | { |
| 243 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *)lphp_ctlr; |
| 244 | |
| 245 | DBG_ENTER_ROUTINE |
| 246 | |
| 247 | if ( !php_ctlr ) { |
| 248 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 249 | return; |
| 250 | } |
| 251 | |
| 252 | /* Poll for interrupt events. regs == NULL => polling */ |
| 253 | shpc_isr( 0, (void *)php_ctlr, NULL ); |
| 254 | |
| 255 | init_timer(&php_ctlr->int_poll_timer); |
| 256 | if (!shpchp_poll_time) |
| 257 | shpchp_poll_time = 2; /* reset timer to poll in 2 secs if user doesn't specify at module installation*/ |
| 258 | |
| 259 | start_int_poll_timer(php_ctlr, shpchp_poll_time); |
| 260 | |
| 261 | return; |
| 262 | } |
| 263 | |
| 264 | /* This function starts the interrupt polling timer. */ |
| 265 | static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds) |
| 266 | { |
| 267 | if (!php_ctlr) { |
| 268 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 269 | return; |
| 270 | } |
| 271 | |
| 272 | if ( ( seconds <= 0 ) || ( seconds > 60 ) ) |
| 273 | seconds = 2; /* Clamp to sane value */ |
| 274 | |
| 275 | php_ctlr->int_poll_timer.function = &int_poll_timeout; |
| 276 | php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr; /* Instance data */ |
| 277 | php_ctlr->int_poll_timer.expires = jiffies + seconds * HZ; |
| 278 | add_timer(&php_ctlr->int_poll_timer); |
| 279 | |
| 280 | return; |
| 281 | } |
| 282 | |
| 283 | static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) |
| 284 | { |
| 285 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 286 | u16 cmd_status; |
| 287 | int retval = 0; |
| 288 | u16 temp_word; |
| 289 | int i; |
| 290 | |
| 291 | DBG_ENTER_ROUTINE |
| 292 | |
| 293 | if (!php_ctlr) { |
| 294 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 295 | return -1; |
| 296 | } |
| 297 | |
| 298 | for (i = 0; i < 10; i++) { |
| 299 | cmd_status = readw(php_ctlr->creg + CMD_STATUS); |
| 300 | |
| 301 | if (!(cmd_status & 0x1)) |
| 302 | break; |
| 303 | /* Check every 0.1 sec for a total of 1 sec*/ |
| 304 | msleep(100); |
| 305 | } |
| 306 | |
| 307 | cmd_status = readw(php_ctlr->creg + CMD_STATUS); |
| 308 | |
| 309 | if (cmd_status & 0x1) { |
| 310 | /* After 1 sec and and the controller is still busy */ |
| 311 | err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__); |
| 312 | return -1; |
| 313 | } |
| 314 | |
| 315 | ++t_slot; |
| 316 | temp_word = (t_slot << 8) | (cmd & 0xFF); |
| 317 | dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd); |
| 318 | |
| 319 | /* To make sure the Controller Busy bit is 0 before we send out the |
| 320 | * command. |
| 321 | */ |
| 322 | writew(temp_word, php_ctlr->creg + CMD); |
| 323 | dbg("%s: temp_word written %x\n", __FUNCTION__, temp_word); |
| 324 | |
| 325 | DBG_LEAVE_ROUTINE |
| 326 | return retval; |
| 327 | } |
| 328 | |
| 329 | static int hpc_check_cmd_status(struct controller *ctrl) |
| 330 | { |
| 331 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| 332 | u16 cmd_status; |
| 333 | int retval = 0; |
| 334 | |
| 335 | DBG_ENTER_ROUTINE |
| 336 | |
| 337 | if (!ctrl->hpc_ctlr_handle) { |
| 338 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 339 | return -1; |
| 340 | } |
| 341 | |
| 342 | cmd_status = readw(php_ctlr->creg + CMD_STATUS) & 0x000F; |
| 343 | |
| 344 | switch (cmd_status >> 1) { |
| 345 | case 0: |
| 346 | retval = 0; |
| 347 | break; |
| 348 | case 1: |
| 349 | retval = SWITCH_OPEN; |
| 350 | err("%s: Switch opened!\n", __FUNCTION__); |
| 351 | break; |
| 352 | case 2: |
| 353 | retval = INVALID_CMD; |
| 354 | err("%s: Invalid HPC command!\n", __FUNCTION__); |
| 355 | break; |
| 356 | case 4: |
| 357 | retval = INVALID_SPEED_MODE; |
| 358 | err("%s: Invalid bus speed/mode!\n", __FUNCTION__); |
| 359 | break; |
| 360 | default: |
| 361 | retval = cmd_status; |
| 362 | } |
| 363 | |
| 364 | DBG_LEAVE_ROUTINE |
| 365 | return retval; |
| 366 | } |
| 367 | |
| 368 | |
| 369 | static int hpc_get_attention_status(struct slot *slot, u8 *status) |
| 370 | { |
| 371 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 372 | u32 slot_reg; |
| 373 | u16 slot_status; |
| 374 | u8 atten_led_state; |
| 375 | |
| 376 | DBG_ENTER_ROUTINE |
| 377 | |
| 378 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 379 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 380 | return -1; |
| 381 | } |
| 382 | |
| 383 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 384 | slot_status = (u16) slot_reg; |
| 385 | atten_led_state = (slot_status & 0x0030) >> 4; |
| 386 | |
| 387 | switch (atten_led_state) { |
| 388 | case 0: |
| 389 | *status = 0xFF; /* Reserved */ |
| 390 | break; |
| 391 | case 1: |
| 392 | *status = 1; /* On */ |
| 393 | break; |
| 394 | case 2: |
| 395 | *status = 2; /* Blink */ |
| 396 | break; |
| 397 | case 3: |
| 398 | *status = 0; /* Off */ |
| 399 | break; |
| 400 | default: |
| 401 | *status = 0xFF; |
| 402 | break; |
| 403 | } |
| 404 | |
| 405 | DBG_LEAVE_ROUTINE |
| 406 | return 0; |
| 407 | } |
| 408 | |
| 409 | static int hpc_get_power_status(struct slot * slot, u8 *status) |
| 410 | { |
| 411 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 412 | u32 slot_reg; |
| 413 | u16 slot_status; |
| 414 | u8 slot_state; |
| 415 | int retval = 0; |
| 416 | |
| 417 | DBG_ENTER_ROUTINE |
| 418 | |
| 419 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 420 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 421 | return -1; |
| 422 | } |
| 423 | |
| 424 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 425 | slot_status = (u16) slot_reg; |
| 426 | slot_state = (slot_status & 0x0003); |
| 427 | |
| 428 | switch (slot_state) { |
| 429 | case 0: |
| 430 | *status = 0xFF; |
| 431 | break; |
| 432 | case 1: |
| 433 | *status = 2; /* Powered only */ |
| 434 | break; |
| 435 | case 2: |
| 436 | *status = 1; /* Enabled */ |
| 437 | break; |
| 438 | case 3: |
| 439 | *status = 0; /* Disabled */ |
| 440 | break; |
| 441 | default: |
| 442 | *status = 0xFF; |
| 443 | break; |
| 444 | } |
| 445 | |
| 446 | DBG_LEAVE_ROUTINE |
| 447 | return retval; |
| 448 | } |
| 449 | |
| 450 | |
| 451 | static int hpc_get_latch_status(struct slot *slot, u8 *status) |
| 452 | { |
| 453 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 454 | u32 slot_reg; |
| 455 | u16 slot_status; |
| 456 | |
| 457 | DBG_ENTER_ROUTINE |
| 458 | |
| 459 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 460 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 461 | return -1; |
| 462 | } |
| 463 | |
| 464 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 465 | slot_status = (u16)slot_reg; |
| 466 | |
| 467 | *status = ((slot_status & 0x0100) == 0) ? 0 : 1; /* 0 -> close; 1 -> open */ |
| 468 | |
| 469 | |
| 470 | DBG_LEAVE_ROUTINE |
| 471 | return 0; |
| 472 | } |
| 473 | |
| 474 | static int hpc_get_adapter_status(struct slot *slot, u8 *status) |
| 475 | { |
| 476 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 477 | u32 slot_reg; |
| 478 | u16 slot_status; |
| 479 | u8 card_state; |
| 480 | |
| 481 | DBG_ENTER_ROUTINE |
| 482 | |
| 483 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 484 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 485 | return -1; |
| 486 | } |
| 487 | |
| 488 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 489 | slot_status = (u16)slot_reg; |
| 490 | card_state = (u8)((slot_status & 0x0C00) >> 10); |
| 491 | *status = (card_state != 0x3) ? 1 : 0; |
| 492 | |
| 493 | DBG_LEAVE_ROUTINE |
| 494 | return 0; |
| 495 | } |
| 496 | |
| 497 | static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) |
| 498 | { |
| 499 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 500 | |
| 501 | DBG_ENTER_ROUTINE |
| 502 | |
| 503 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 504 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 505 | return -1; |
| 506 | } |
| 507 | |
| 508 | *prog_int = readb(php_ctlr->creg + PROG_INTERFACE); |
| 509 | |
| 510 | DBG_LEAVE_ROUTINE |
| 511 | return 0; |
| 512 | } |
| 513 | |
| 514 | static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) |
| 515 | { |
| 516 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 517 | u32 slot_reg; |
| 518 | u16 slot_status, sec_bus_status; |
| 519 | u8 m66_cap, pcix_cap, pi; |
| 520 | int retval = 0; |
| 521 | |
| 522 | DBG_ENTER_ROUTINE |
| 523 | |
| 524 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 525 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 526 | return -1; |
| 527 | } |
| 528 | |
| 529 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 530 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 531 | return -1; |
| 532 | } |
| 533 | |
| 534 | pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| 535 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 536 | dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg); |
| 537 | slot_status = (u16) slot_reg; |
| 538 | dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status); |
| 539 | sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| 540 | |
| 541 | pcix_cap = (u8) ((slot_status & 0x3000) >> 12); |
| 542 | dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap); |
| 543 | m66_cap = (u8) ((slot_status & 0x0200) >> 9); |
| 544 | dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap); |
| 545 | |
| 546 | |
| 547 | if (pi == 2) { |
| 548 | switch (pcix_cap) { |
| 549 | case 0: |
| 550 | *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; |
| 551 | break; |
| 552 | case 1: |
| 553 | *value = PCI_SPEED_66MHz_PCIX; |
| 554 | break; |
| 555 | case 3: |
| 556 | *value = PCI_SPEED_133MHz_PCIX; |
| 557 | break; |
| 558 | case 4: |
| 559 | *value = PCI_SPEED_133MHz_PCIX_266; |
| 560 | break; |
| 561 | case 5: |
| 562 | *value = PCI_SPEED_133MHz_PCIX_533; |
| 563 | break; |
| 564 | case 2: /* Reserved */ |
| 565 | default: |
| 566 | *value = PCI_SPEED_UNKNOWN; |
| 567 | retval = -ENODEV; |
| 568 | break; |
| 569 | } |
| 570 | } else { |
| 571 | switch (pcix_cap) { |
| 572 | case 0: |
| 573 | *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; |
| 574 | break; |
| 575 | case 1: |
| 576 | *value = PCI_SPEED_66MHz_PCIX; |
| 577 | break; |
| 578 | case 3: |
| 579 | *value = PCI_SPEED_133MHz_PCIX; |
| 580 | break; |
| 581 | case 2: /* Reserved */ |
| 582 | default: |
| 583 | *value = PCI_SPEED_UNKNOWN; |
| 584 | retval = -ENODEV; |
| 585 | break; |
| 586 | } |
| 587 | } |
| 588 | |
| 589 | dbg("Adapter speed = %d\n", *value); |
| 590 | |
| 591 | DBG_LEAVE_ROUTINE |
| 592 | return retval; |
| 593 | } |
| 594 | |
| 595 | static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) |
| 596 | { |
| 597 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 598 | u16 sec_bus_status; |
| 599 | u8 pi; |
| 600 | int retval = 0; |
| 601 | |
| 602 | DBG_ENTER_ROUTINE |
| 603 | |
| 604 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 605 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 606 | return -1; |
| 607 | } |
| 608 | |
| 609 | pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| 610 | sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| 611 | |
| 612 | if (pi == 2) { |
| 613 | *mode = (sec_bus_status & 0x0100) >> 7; |
| 614 | } else { |
| 615 | retval = -1; |
| 616 | } |
| 617 | |
| 618 | dbg("Mode 1 ECC cap = %d\n", *mode); |
| 619 | |
| 620 | DBG_LEAVE_ROUTINE |
| 621 | return retval; |
| 622 | } |
| 623 | |
| 624 | static int hpc_query_power_fault(struct slot * slot) |
| 625 | { |
| 626 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 627 | u32 slot_reg; |
| 628 | u16 slot_status; |
| 629 | u8 pwr_fault_state, status; |
| 630 | |
| 631 | DBG_ENTER_ROUTINE |
| 632 | |
| 633 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 634 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 635 | return -1; |
| 636 | } |
| 637 | |
| 638 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| 639 | slot_status = (u16) slot_reg; |
| 640 | pwr_fault_state = (slot_status & 0x0040) >> 7; |
| 641 | status = (pwr_fault_state == 1) ? 0 : 1; |
| 642 | |
| 643 | DBG_LEAVE_ROUTINE |
| 644 | /* Note: Logic 0 => fault */ |
| 645 | return status; |
| 646 | } |
| 647 | |
| 648 | static int hpc_set_attention_status(struct slot *slot, u8 value) |
| 649 | { |
| 650 | struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 651 | u8 slot_cmd = 0; |
| 652 | int rc = 0; |
| 653 | |
| 654 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 655 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 656 | return -1; |
| 657 | } |
| 658 | |
| 659 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 660 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 661 | return -1; |
| 662 | } |
| 663 | |
| 664 | switch (value) { |
| 665 | case 0 : |
| 666 | slot_cmd = 0x30; /* OFF */ |
| 667 | break; |
| 668 | case 1: |
| 669 | slot_cmd = 0x10; /* ON */ |
| 670 | break; |
| 671 | case 2: |
| 672 | slot_cmd = 0x20; /* BLINK */ |
| 673 | break; |
| 674 | default: |
| 675 | return -1; |
| 676 | } |
| 677 | |
| 678 | shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 679 | |
| 680 | return rc; |
| 681 | } |
| 682 | |
| 683 | |
| 684 | static void hpc_set_green_led_on(struct slot *slot) |
| 685 | { |
| 686 | struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 687 | u8 slot_cmd; |
| 688 | |
| 689 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 690 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 691 | return ; |
| 692 | } |
| 693 | |
| 694 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 695 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 696 | return ; |
| 697 | } |
| 698 | |
| 699 | slot_cmd = 0x04; |
| 700 | |
| 701 | shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 702 | |
| 703 | return; |
| 704 | } |
| 705 | |
| 706 | static void hpc_set_green_led_off(struct slot *slot) |
| 707 | { |
| 708 | struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 709 | u8 slot_cmd; |
| 710 | |
| 711 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 712 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 713 | return ; |
| 714 | } |
| 715 | |
| 716 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 717 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 718 | return ; |
| 719 | } |
| 720 | |
| 721 | slot_cmd = 0x0C; |
| 722 | |
| 723 | shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 724 | |
| 725 | return; |
| 726 | } |
| 727 | |
| 728 | static void hpc_set_green_led_blink(struct slot *slot) |
| 729 | { |
| 730 | struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 731 | u8 slot_cmd; |
| 732 | |
| 733 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 734 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 735 | return ; |
| 736 | } |
| 737 | |
| 738 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 739 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 740 | return ; |
| 741 | } |
| 742 | |
| 743 | slot_cmd = 0x08; |
| 744 | |
| 745 | shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 746 | |
| 747 | return; |
| 748 | } |
| 749 | |
| 750 | int shpc_get_ctlr_slot_config(struct controller *ctrl, |
| 751 | int *num_ctlr_slots, /* number of slots in this HPC */ |
| 752 | int *first_device_num, /* PCI dev num of the first slot in this SHPC */ |
| 753 | int *physical_slot_num, /* phy slot num of the first slot in this SHPC */ |
| 754 | int *updown, /* physical_slot_num increament: 1 or -1 */ |
| 755 | int *flags) |
| 756 | { |
| 757 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| 758 | |
| 759 | DBG_ENTER_ROUTINE |
| 760 | |
| 761 | if (!ctrl->hpc_ctlr_handle) { |
| 762 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 763 | return -1; |
| 764 | } |
| 765 | |
| 766 | *first_device_num = php_ctlr->slot_device_offset; /* Obtained in shpc_init() */ |
| 767 | *num_ctlr_slots = php_ctlr->num_slots; /* Obtained in shpc_init() */ |
| 768 | |
| 769 | *physical_slot_num = (readl(php_ctlr->creg + SLOT_CONFIG) & PSN) >> 16; |
| 770 | dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num); |
| 771 | *updown = ((readl(php_ctlr->creg + SLOT_CONFIG) & UPDOWN ) >> 29) ? 1 : -1; |
| 772 | |
| 773 | DBG_LEAVE_ROUTINE |
| 774 | return 0; |
| 775 | } |
| 776 | |
| 777 | static void hpc_release_ctlr(struct controller *ctrl) |
| 778 | { |
| 779 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| 780 | struct php_ctlr_state_s *p, *p_prev; |
| 781 | |
| 782 | DBG_ENTER_ROUTINE |
| 783 | |
| 784 | if (!ctrl->hpc_ctlr_handle) { |
| 785 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 786 | return ; |
| 787 | } |
| 788 | |
| 789 | if (shpchp_poll_mode) { |
| 790 | del_timer(&php_ctlr->int_poll_timer); |
| 791 | } else { |
| 792 | if (php_ctlr->irq) { |
| 793 | free_irq(php_ctlr->irq, ctrl); |
| 794 | php_ctlr->irq = 0; |
| 795 | pci_disable_msi(php_ctlr->pci_dev); |
| 796 | } |
| 797 | } |
| 798 | if (php_ctlr->pci_dev) { |
| 799 | dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); |
| 800 | iounmap(php_ctlr->creg); |
| 801 | release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0)); |
| 802 | dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); |
| 803 | php_ctlr->pci_dev = NULL; |
| 804 | } |
| 805 | |
| 806 | spin_lock(&list_lock); |
| 807 | p = php_ctlr_list_head; |
| 808 | p_prev = NULL; |
| 809 | while (p) { |
| 810 | if (p == php_ctlr) { |
| 811 | if (p_prev) |
| 812 | p_prev->pnext = p->pnext; |
| 813 | else |
| 814 | php_ctlr_list_head = p->pnext; |
| 815 | break; |
| 816 | } else { |
| 817 | p_prev = p; |
| 818 | p = p->pnext; |
| 819 | } |
| 820 | } |
| 821 | spin_unlock(&list_lock); |
| 822 | |
| 823 | kfree(php_ctlr); |
| 824 | |
| 825 | DBG_LEAVE_ROUTINE |
| 826 | |
| 827 | } |
| 828 | |
| 829 | static int hpc_power_on_slot(struct slot * slot) |
| 830 | { |
| 831 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 832 | u8 slot_cmd; |
| 833 | int retval = 0; |
| 834 | |
| 835 | DBG_ENTER_ROUTINE |
| 836 | |
| 837 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 838 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 839 | return -1; |
| 840 | } |
| 841 | |
| 842 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 843 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 844 | return -1; |
| 845 | } |
| 846 | slot_cmd = 0x01; |
| 847 | |
| 848 | retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 849 | |
| 850 | if (retval) { |
| 851 | err("%s: Write command failed!\n", __FUNCTION__); |
| 852 | return -1; |
| 853 | } |
| 854 | |
| 855 | DBG_LEAVE_ROUTINE |
| 856 | |
| 857 | return retval; |
| 858 | } |
| 859 | |
| 860 | static int hpc_slot_enable(struct slot * slot) |
| 861 | { |
| 862 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 863 | u8 slot_cmd; |
| 864 | int retval = 0; |
| 865 | |
| 866 | DBG_ENTER_ROUTINE |
| 867 | |
| 868 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 869 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 870 | return -1; |
| 871 | } |
| 872 | |
| 873 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 874 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 875 | return -1; |
| 876 | } |
| 877 | /* 3A => Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */ |
| 878 | slot_cmd = 0x3A; |
| 879 | |
| 880 | retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 881 | |
| 882 | if (retval) { |
| 883 | err("%s: Write command failed!\n", __FUNCTION__); |
| 884 | return -1; |
| 885 | } |
| 886 | |
| 887 | DBG_LEAVE_ROUTINE |
| 888 | return retval; |
| 889 | } |
| 890 | |
| 891 | static int hpc_slot_disable(struct slot * slot) |
| 892 | { |
| 893 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 894 | u8 slot_cmd; |
| 895 | int retval = 0; |
| 896 | |
| 897 | DBG_ENTER_ROUTINE |
| 898 | |
| 899 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 900 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 901 | return -1; |
| 902 | } |
| 903 | |
| 904 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 905 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 906 | return -1; |
| 907 | } |
| 908 | |
| 909 | /* 1F => Slot - Disable, Power Indicator - Off, Attention Indicator - On */ |
| 910 | slot_cmd = 0x1F; |
| 911 | |
| 912 | retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| 913 | |
| 914 | if (retval) { |
| 915 | err("%s: Write command failed!\n", __FUNCTION__); |
| 916 | return -1; |
| 917 | } |
| 918 | |
| 919 | DBG_LEAVE_ROUTINE |
| 920 | return retval; |
| 921 | } |
| 922 | |
| 923 | static int hpc_enable_all_slots( struct slot *slot ) |
| 924 | { |
| 925 | int retval = 0; |
| 926 | |
| 927 | DBG_ENTER_ROUTINE |
| 928 | |
| 929 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 930 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 931 | return -1; |
| 932 | } |
| 933 | |
| 934 | retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL); |
| 935 | if (retval) { |
| 936 | err("%s: Write command failed!\n", __FUNCTION__); |
| 937 | return -1; |
| 938 | } |
| 939 | |
| 940 | DBG_LEAVE_ROUTINE |
| 941 | |
| 942 | return retval; |
| 943 | } |
| 944 | |
| 945 | static int hpc_pwr_on_all_slots(struct slot *slot) |
| 946 | { |
| 947 | int retval = 0; |
| 948 | |
| 949 | DBG_ENTER_ROUTINE |
| 950 | |
| 951 | retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL); |
| 952 | |
| 953 | if (retval) { |
| 954 | err("%s: Write command failed!\n", __FUNCTION__); |
| 955 | return -1; |
| 956 | } |
| 957 | |
| 958 | DBG_LEAVE_ROUTINE |
| 959 | return retval; |
| 960 | } |
| 961 | |
| 962 | static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) |
| 963 | { |
| 964 | u8 slot_cmd; |
| 965 | u8 pi; |
| 966 | int retval = 0; |
| 967 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 968 | |
| 969 | DBG_ENTER_ROUTINE |
| 970 | |
| 971 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 972 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 973 | return -1; |
| 974 | } |
| 975 | |
| 976 | pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| 977 | |
| 978 | if (pi == 1) { |
| 979 | switch (value) { |
| 980 | case 0: |
| 981 | slot_cmd = SETA_PCI_33MHZ; |
| 982 | break; |
| 983 | case 1: |
| 984 | slot_cmd = SETA_PCI_66MHZ; |
| 985 | break; |
| 986 | case 2: |
| 987 | slot_cmd = SETA_PCIX_66MHZ; |
| 988 | break; |
| 989 | case 3: |
| 990 | slot_cmd = SETA_PCIX_100MHZ; |
| 991 | break; |
| 992 | case 4: |
| 993 | slot_cmd = SETA_PCIX_133MHZ; |
| 994 | break; |
| 995 | default: |
| 996 | slot_cmd = PCI_SPEED_UNKNOWN; |
| 997 | retval = -ENODEV; |
| 998 | return retval; |
| 999 | } |
| 1000 | } else { |
| 1001 | switch (value) { |
| 1002 | case 0: |
| 1003 | slot_cmd = SETB_PCI_33MHZ; |
| 1004 | break; |
| 1005 | case 1: |
| 1006 | slot_cmd = SETB_PCI_66MHZ; |
| 1007 | break; |
| 1008 | case 2: |
| 1009 | slot_cmd = SETB_PCIX_66MHZ_PM; |
| 1010 | break; |
| 1011 | case 3: |
| 1012 | slot_cmd = SETB_PCIX_100MHZ_PM; |
| 1013 | break; |
| 1014 | case 4: |
| 1015 | slot_cmd = SETB_PCIX_133MHZ_PM; |
| 1016 | break; |
| 1017 | case 5: |
| 1018 | slot_cmd = SETB_PCIX_66MHZ_EM; |
| 1019 | break; |
| 1020 | case 6: |
| 1021 | slot_cmd = SETB_PCIX_100MHZ_EM; |
| 1022 | break; |
| 1023 | case 7: |
| 1024 | slot_cmd = SETB_PCIX_133MHZ_EM; |
| 1025 | break; |
| 1026 | case 8: |
| 1027 | slot_cmd = SETB_PCIX_66MHZ_266; |
| 1028 | break; |
| 1029 | case 0x9: |
| 1030 | slot_cmd = SETB_PCIX_100MHZ_266; |
| 1031 | break; |
| 1032 | case 0xa: |
| 1033 | slot_cmd = SETB_PCIX_133MHZ_266; |
| 1034 | break; |
| 1035 | case 0xb: |
| 1036 | slot_cmd = SETB_PCIX_66MHZ_533; |
| 1037 | break; |
| 1038 | case 0xc: |
| 1039 | slot_cmd = SETB_PCIX_100MHZ_533; |
| 1040 | break; |
| 1041 | case 0xd: |
| 1042 | slot_cmd = SETB_PCIX_133MHZ_533; |
| 1043 | break; |
| 1044 | default: |
| 1045 | slot_cmd = PCI_SPEED_UNKNOWN; |
| 1046 | retval = -ENODEV; |
| 1047 | return retval; |
| 1048 | } |
| 1049 | |
| 1050 | } |
| 1051 | retval = shpc_write_cmd(slot, 0, slot_cmd); |
| 1052 | if (retval) { |
| 1053 | err("%s: Write command failed!\n", __FUNCTION__); |
| 1054 | return -1; |
| 1055 | } |
| 1056 | |
| 1057 | DBG_LEAVE_ROUTINE |
| 1058 | return retval; |
| 1059 | } |
| 1060 | |
| 1061 | static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) |
| 1062 | { |
| 1063 | struct controller *ctrl = NULL; |
| 1064 | struct php_ctlr_state_s *php_ctlr; |
| 1065 | u8 schedule_flag = 0; |
| 1066 | u8 temp_byte; |
| 1067 | u32 temp_dword, intr_loc, intr_loc2; |
| 1068 | int hp_slot; |
| 1069 | |
| 1070 | if (!dev_id) |
| 1071 | return IRQ_NONE; |
| 1072 | |
| 1073 | if (!shpchp_poll_mode) { |
| 1074 | ctrl = (struct controller *)dev_id; |
| 1075 | php_ctlr = ctrl->hpc_ctlr_handle; |
| 1076 | } else { |
| 1077 | php_ctlr = (struct php_ctlr_state_s *) dev_id; |
| 1078 | ctrl = (struct controller *)php_ctlr->callback_instance_id; |
| 1079 | } |
| 1080 | |
| 1081 | if (!ctrl) |
| 1082 | return IRQ_NONE; |
| 1083 | |
| 1084 | if (!php_ctlr || !php_ctlr->creg) |
| 1085 | return IRQ_NONE; |
| 1086 | |
| 1087 | /* Check to see if it was our interrupt */ |
| 1088 | intr_loc = readl(php_ctlr->creg + INTR_LOC); |
| 1089 | |
| 1090 | if (!intr_loc) |
| 1091 | return IRQ_NONE; |
| 1092 | dbg("%s: shpc_isr proceeds\n", __FUNCTION__); |
| 1093 | dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc); |
| 1094 | |
| 1095 | if(!shpchp_poll_mode) { |
| 1096 | /* Mask Global Interrupt Mask - see implementation note on p. 139 */ |
| 1097 | /* of SHPC spec rev 1.0*/ |
| 1098 | temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1099 | dbg("%s: Before masking global interrupt, temp_dword = %x\n", |
| 1100 | __FUNCTION__, temp_dword); |
| 1101 | temp_dword |= 0x00000001; |
| 1102 | dbg("%s: After masking global interrupt, temp_dword = %x\n", |
| 1103 | __FUNCTION__, temp_dword); |
| 1104 | writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1105 | |
| 1106 | intr_loc2 = readl(php_ctlr->creg + INTR_LOC); |
| 1107 | dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); |
| 1108 | } |
| 1109 | |
| 1110 | if (intr_loc & 0x0001) { |
| 1111 | /* |
| 1112 | * Command Complete Interrupt Pending |
| 1113 | * RO only - clear by writing 0 to the Command Completion |
| 1114 | * Detect bit in Controller SERR-INT register |
| 1115 | */ |
| 1116 | temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1117 | dbg("%s: Before clearing CCIP, temp_dword = %x\n", |
| 1118 | __FUNCTION__, temp_dword); |
| 1119 | temp_dword &= 0xfffeffff; |
| 1120 | dbg("%s: After clearing CCIP, temp_dword = %x\n", |
| 1121 | __FUNCTION__, temp_dword); |
| 1122 | writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1123 | wake_up_interruptible(&ctrl->queue); |
| 1124 | } |
| 1125 | |
| 1126 | if ((intr_loc = (intr_loc >> 1)) == 0) { |
| 1127 | /* Unmask Global Interrupt Mask */ |
| 1128 | temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1129 | dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n", |
| 1130 | __FUNCTION__, temp_dword); |
| 1131 | temp_dword &= 0xfffffffe; |
| 1132 | dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n", |
| 1133 | __FUNCTION__, temp_dword); |
| 1134 | writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1135 | |
| 1136 | return IRQ_NONE; |
| 1137 | } |
| 1138 | |
| 1139 | for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { |
| 1140 | /* To find out which slot has interrupt pending */ |
| 1141 | if ((intr_loc >> hp_slot) & 0x01) { |
| 1142 | temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| 1143 | dbg("%s: Slot %x with intr, temp_dword = %x\n", |
| 1144 | __FUNCTION__, hp_slot, temp_dword); |
| 1145 | temp_byte = (temp_dword >> 16) & 0xFF; |
| 1146 | dbg("%s: Slot with intr, temp_byte = %x\n", |
| 1147 | __FUNCTION__, temp_byte); |
| 1148 | if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08)) |
| 1149 | schedule_flag += php_ctlr->switch_change_callback( |
| 1150 | hp_slot, php_ctlr->callback_instance_id); |
| 1151 | if ((php_ctlr->attention_button_callback) && (temp_byte & 0x04)) |
| 1152 | schedule_flag += php_ctlr->attention_button_callback( |
| 1153 | hp_slot, php_ctlr->callback_instance_id); |
| 1154 | if ((php_ctlr->presence_change_callback) && (temp_byte & 0x01)) |
| 1155 | schedule_flag += php_ctlr->presence_change_callback( |
| 1156 | hp_slot , php_ctlr->callback_instance_id); |
| 1157 | if ((php_ctlr->power_fault_callback) && (temp_byte & 0x12)) |
| 1158 | schedule_flag += php_ctlr->power_fault_callback( |
| 1159 | hp_slot, php_ctlr->callback_instance_id); |
| 1160 | |
| 1161 | /* Clear all slot events */ |
| 1162 | temp_dword = 0xe01f3fff; |
| 1163 | dbg("%s: Clearing slot events, temp_dword = %x\n", |
| 1164 | __FUNCTION__, temp_dword); |
| 1165 | writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| 1166 | |
| 1167 | intr_loc2 = readl(php_ctlr->creg + INTR_LOC); |
| 1168 | dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); |
| 1169 | } |
| 1170 | } |
| 1171 | if (!shpchp_poll_mode) { |
| 1172 | /* Unmask Global Interrupt Mask */ |
| 1173 | temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1174 | dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n", |
| 1175 | __FUNCTION__, temp_dword); |
| 1176 | temp_dword &= 0xfffffffe; |
| 1177 | dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n", |
| 1178 | __FUNCTION__, temp_dword); |
| 1179 | writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1180 | } |
| 1181 | |
| 1182 | return IRQ_HANDLED; |
| 1183 | } |
| 1184 | |
| 1185 | static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) |
| 1186 | { |
| 1187 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 1188 | enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; |
| 1189 | int retval = 0; |
| 1190 | u8 pi; |
| 1191 | u32 slot_avail1, slot_avail2; |
| 1192 | int slot_num; |
| 1193 | |
| 1194 | DBG_ENTER_ROUTINE |
| 1195 | |
| 1196 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 1197 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 1198 | return -1; |
| 1199 | } |
| 1200 | |
| 1201 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 1202 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 1203 | return -1; |
| 1204 | } |
| 1205 | |
| 1206 | pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| 1207 | slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); |
| 1208 | slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); |
| 1209 | |
| 1210 | if (pi == 2) { |
| 1211 | if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_533) >> 27) ) != 0 ) |
| 1212 | bus_speed = PCIX_133MHZ_533; |
| 1213 | else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_533) >> 23) ) != 0 ) |
| 1214 | bus_speed = PCIX_100MHZ_533; |
| 1215 | else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_533) >> 19) ) != 0 ) |
| 1216 | bus_speed = PCIX_66MHZ_533; |
| 1217 | else if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_266) >> 15) ) != 0 ) |
| 1218 | bus_speed = PCIX_133MHZ_266; |
| 1219 | else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_266) >> 11) ) != 0 ) |
| 1220 | bus_speed = PCIX_100MHZ_266; |
| 1221 | else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_266) >> 7) ) != 0 ) |
| 1222 | bus_speed = PCIX_66MHZ_266; |
| 1223 | else if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 ) |
| 1224 | bus_speed = PCIX_133MHZ; |
| 1225 | else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 ) |
| 1226 | bus_speed = PCIX_100MHZ; |
| 1227 | else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 ) |
| 1228 | bus_speed = PCIX_66MHZ; |
| 1229 | else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 ) |
| 1230 | bus_speed = PCI_66MHZ; |
| 1231 | else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 ) |
| 1232 | bus_speed = PCI_33MHZ; |
| 1233 | else bus_speed = PCI_SPEED_UNKNOWN; |
| 1234 | } else { |
| 1235 | if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 ) |
| 1236 | bus_speed = PCIX_133MHZ; |
| 1237 | else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 ) |
| 1238 | bus_speed = PCIX_100MHZ; |
| 1239 | else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 ) |
| 1240 | bus_speed = PCIX_66MHZ; |
| 1241 | else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 ) |
| 1242 | bus_speed = PCI_66MHZ; |
| 1243 | else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 ) |
| 1244 | bus_speed = PCI_33MHZ; |
| 1245 | else bus_speed = PCI_SPEED_UNKNOWN; |
| 1246 | } |
| 1247 | |
| 1248 | *value = bus_speed; |
| 1249 | dbg("Max bus speed = %d\n", bus_speed); |
| 1250 | DBG_LEAVE_ROUTINE |
| 1251 | return retval; |
| 1252 | } |
| 1253 | |
| 1254 | static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) |
| 1255 | { |
| 1256 | struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| 1257 | enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; |
| 1258 | u16 sec_bus_status; |
| 1259 | int retval = 0; |
| 1260 | u8 pi; |
| 1261 | |
| 1262 | DBG_ENTER_ROUTINE |
| 1263 | |
| 1264 | if (!slot->ctrl->hpc_ctlr_handle) { |
| 1265 | err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| 1266 | return -1; |
| 1267 | } |
| 1268 | |
| 1269 | if (slot->hp_slot >= php_ctlr->num_slots) { |
| 1270 | err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| 1271 | return -1; |
| 1272 | } |
| 1273 | |
| 1274 | pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| 1275 | sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| 1276 | |
| 1277 | if (pi == 2) { |
| 1278 | switch (sec_bus_status & 0x000f) { |
| 1279 | case 0: |
| 1280 | bus_speed = PCI_SPEED_33MHz; |
| 1281 | break; |
| 1282 | case 1: |
| 1283 | bus_speed = PCI_SPEED_66MHz; |
| 1284 | break; |
| 1285 | case 2: |
| 1286 | bus_speed = PCI_SPEED_66MHz_PCIX; |
| 1287 | break; |
| 1288 | case 3: |
| 1289 | bus_speed = PCI_SPEED_100MHz_PCIX; |
| 1290 | break; |
| 1291 | case 4: |
| 1292 | bus_speed = PCI_SPEED_133MHz_PCIX; |
| 1293 | break; |
| 1294 | case 5: |
| 1295 | bus_speed = PCI_SPEED_66MHz_PCIX_ECC; |
| 1296 | break; |
| 1297 | case 6: |
| 1298 | bus_speed = PCI_SPEED_100MHz_PCIX_ECC; |
| 1299 | break; |
| 1300 | case 7: |
| 1301 | bus_speed = PCI_SPEED_133MHz_PCIX_ECC; |
| 1302 | break; |
| 1303 | case 8: |
| 1304 | bus_speed = PCI_SPEED_66MHz_PCIX_266; |
| 1305 | break; |
| 1306 | case 9: |
| 1307 | bus_speed = PCI_SPEED_100MHz_PCIX_266; |
| 1308 | break; |
| 1309 | case 0xa: |
| 1310 | bus_speed = PCI_SPEED_133MHz_PCIX_266; |
| 1311 | break; |
| 1312 | case 0xb: |
| 1313 | bus_speed = PCI_SPEED_66MHz_PCIX_533; |
| 1314 | break; |
| 1315 | case 0xc: |
| 1316 | bus_speed = PCI_SPEED_100MHz_PCIX_533; |
| 1317 | break; |
| 1318 | case 0xd: |
| 1319 | bus_speed = PCI_SPEED_133MHz_PCIX_533; |
| 1320 | break; |
| 1321 | case 0xe: |
| 1322 | case 0xf: |
| 1323 | default: |
| 1324 | bus_speed = PCI_SPEED_UNKNOWN; |
| 1325 | break; |
| 1326 | } |
| 1327 | } else { |
| 1328 | /* In the case where pi is undefined, default it to 1 */ |
| 1329 | switch (sec_bus_status & 0x0007) { |
| 1330 | case 0: |
| 1331 | bus_speed = PCI_SPEED_33MHz; |
| 1332 | break; |
| 1333 | case 1: |
| 1334 | bus_speed = PCI_SPEED_66MHz; |
| 1335 | break; |
| 1336 | case 2: |
| 1337 | bus_speed = PCI_SPEED_66MHz_PCIX; |
| 1338 | break; |
| 1339 | case 3: |
| 1340 | bus_speed = PCI_SPEED_100MHz_PCIX; |
| 1341 | break; |
| 1342 | case 4: |
| 1343 | bus_speed = PCI_SPEED_133MHz_PCIX; |
| 1344 | break; |
| 1345 | case 5: |
| 1346 | bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| 1347 | break; |
| 1348 | case 6: |
| 1349 | bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| 1350 | break; |
| 1351 | case 7: |
| 1352 | bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| 1353 | break; |
| 1354 | default: |
| 1355 | bus_speed = PCI_SPEED_UNKNOWN; |
| 1356 | break; |
| 1357 | } |
| 1358 | } |
| 1359 | |
| 1360 | *value = bus_speed; |
| 1361 | dbg("Current bus speed = %d\n", bus_speed); |
| 1362 | DBG_LEAVE_ROUTINE |
| 1363 | return retval; |
| 1364 | } |
| 1365 | |
| 1366 | static struct hpc_ops shpchp_hpc_ops = { |
| 1367 | .power_on_slot = hpc_power_on_slot, |
| 1368 | .slot_enable = hpc_slot_enable, |
| 1369 | .slot_disable = hpc_slot_disable, |
| 1370 | .enable_all_slots = hpc_enable_all_slots, |
| 1371 | .pwr_on_all_slots = hpc_pwr_on_all_slots, |
| 1372 | .set_bus_speed_mode = hpc_set_bus_speed_mode, |
| 1373 | .set_attention_status = hpc_set_attention_status, |
| 1374 | .get_power_status = hpc_get_power_status, |
| 1375 | .get_attention_status = hpc_get_attention_status, |
| 1376 | .get_latch_status = hpc_get_latch_status, |
| 1377 | .get_adapter_status = hpc_get_adapter_status, |
| 1378 | |
| 1379 | .get_max_bus_speed = hpc_get_max_bus_speed, |
| 1380 | .get_cur_bus_speed = hpc_get_cur_bus_speed, |
| 1381 | .get_adapter_speed = hpc_get_adapter_speed, |
| 1382 | .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, |
| 1383 | .get_prog_int = hpc_get_prog_int, |
| 1384 | |
| 1385 | .query_power_fault = hpc_query_power_fault, |
| 1386 | .green_led_on = hpc_set_green_led_on, |
| 1387 | .green_led_off = hpc_set_green_led_off, |
| 1388 | .green_led_blink = hpc_set_green_led_blink, |
| 1389 | |
| 1390 | .release_ctlr = hpc_release_ctlr, |
| 1391 | .check_cmd_status = hpc_check_cmd_status, |
| 1392 | }; |
| 1393 | |
| 1394 | int shpc_init(struct controller * ctrl, |
| 1395 | struct pci_dev * pdev, |
| 1396 | php_intr_callback_t attention_button_callback, |
| 1397 | php_intr_callback_t switch_change_callback, |
| 1398 | php_intr_callback_t presence_change_callback, |
| 1399 | php_intr_callback_t power_fault_callback) |
| 1400 | { |
| 1401 | struct php_ctlr_state_s *php_ctlr, *p; |
| 1402 | void *instance_id = ctrl; |
| 1403 | int rc; |
| 1404 | u8 hp_slot; |
| 1405 | static int first = 1; |
| 1406 | u32 shpc_cap_offset, shpc_base_offset; |
| 1407 | u32 tempdword, slot_reg; |
| 1408 | u16 vendor_id, device_id; |
| 1409 | u8 i; |
| 1410 | |
| 1411 | DBG_ENTER_ROUTINE |
| 1412 | |
| 1413 | spin_lock_init(&list_lock); |
| 1414 | php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL); |
| 1415 | |
| 1416 | if (!php_ctlr) { /* allocate controller state data */ |
| 1417 | err("%s: HPC controller memory allocation error!\n", __FUNCTION__); |
| 1418 | goto abort; |
| 1419 | } |
| 1420 | |
| 1421 | memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s)); |
| 1422 | |
| 1423 | php_ctlr->pci_dev = pdev; /* save pci_dev in context */ |
| 1424 | |
| 1425 | rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); |
| 1426 | dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id); |
| 1427 | if (rc) { |
| 1428 | err("%s: unable to read PCI configuration data\n", __FUNCTION__); |
| 1429 | goto abort_free_ctlr; |
| 1430 | } |
| 1431 | |
| 1432 | rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id); |
| 1433 | dbg("%s: Device ID: %x\n",__FUNCTION__, device_id); |
| 1434 | if (rc) { |
| 1435 | err("%s: unable to read PCI configuration data\n", __FUNCTION__); |
| 1436 | goto abort_free_ctlr; |
| 1437 | } |
| 1438 | |
| 1439 | if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) { |
| 1440 | shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */ |
| 1441 | } else { |
| 1442 | if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) { |
| 1443 | err("%s : shpc_cap_offset == 0\n", __FUNCTION__); |
| 1444 | goto abort_free_ctlr; |
| 1445 | } |
| 1446 | dbg("%s: shpc_cap_offset = %x\n", __FUNCTION__, shpc_cap_offset); |
| 1447 | |
| 1448 | rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , BASE_OFFSET); |
| 1449 | if (rc) { |
| 1450 | err("%s : pci_word_config_byte failed\n", __FUNCTION__); |
| 1451 | goto abort_free_ctlr; |
| 1452 | } |
| 1453 | |
| 1454 | rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &shpc_base_offset); |
| 1455 | if (rc) { |
| 1456 | err("%s : pci_read_config_dword failed\n", __FUNCTION__); |
| 1457 | goto abort_free_ctlr; |
| 1458 | } |
| 1459 | |
| 1460 | for (i = 0; i <= 14; i++) { |
| 1461 | rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , i); |
| 1462 | if (rc) { |
| 1463 | err("%s : pci_word_config_byte failed\n", __FUNCTION__); |
| 1464 | goto abort_free_ctlr; |
| 1465 | } |
| 1466 | |
| 1467 | rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &tempdword); |
| 1468 | if (rc) { |
| 1469 | err("%s : pci_read_config_dword failed\n", __FUNCTION__); |
| 1470 | goto abort_free_ctlr; |
| 1471 | } |
| 1472 | dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword); |
| 1473 | } |
| 1474 | } |
| 1475 | |
| 1476 | if (first) { |
| 1477 | spin_lock_init(&hpc_event_lock); |
| 1478 | first = 0; |
| 1479 | } |
| 1480 | |
| 1481 | dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn), |
| 1482 | PCI_FUNC(pdev->devfn), pdev->irq); |
| 1483 | for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++) |
| 1484 | if (pci_resource_len(pdev, rc) > 0) |
| 1485 | dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc, |
| 1486 | pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset); |
| 1487 | |
| 1488 | info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, |
| 1489 | pdev->subsystem_device); |
| 1490 | |
| 1491 | if (pci_enable_device(pdev)) |
| 1492 | goto abort_free_ctlr; |
| 1493 | |
| 1494 | if (!request_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0), MY_NAME)) { |
| 1495 | err("%s: cannot reserve MMIO region\n", __FUNCTION__); |
| 1496 | goto abort_free_ctlr; |
| 1497 | } |
| 1498 | |
| 1499 | php_ctlr->creg = ioremap(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0)); |
| 1500 | if (!php_ctlr->creg) { |
| 1501 | err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__, pci_resource_len(pdev, 0), |
| 1502 | pci_resource_start(pdev, 0) + shpc_base_offset); |
| 1503 | release_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0)); |
| 1504 | goto abort_free_ctlr; |
| 1505 | } |
| 1506 | dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); |
| 1507 | dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0)); |
| 1508 | |
| 1509 | init_MUTEX(&ctrl->crit_sect); |
| 1510 | /* Setup wait queue */ |
| 1511 | init_waitqueue_head(&ctrl->queue); |
| 1512 | |
| 1513 | /* Find the IRQ */ |
| 1514 | php_ctlr->irq = pdev->irq; |
| 1515 | dbg("HPC interrupt = %d\n", php_ctlr->irq); |
| 1516 | |
| 1517 | /* Save interrupt callback info */ |
| 1518 | php_ctlr->attention_button_callback = attention_button_callback; |
| 1519 | php_ctlr->switch_change_callback = switch_change_callback; |
| 1520 | php_ctlr->presence_change_callback = presence_change_callback; |
| 1521 | php_ctlr->power_fault_callback = power_fault_callback; |
| 1522 | php_ctlr->callback_instance_id = instance_id; |
| 1523 | |
| 1524 | /* Return PCI Controller Info */ |
| 1525 | php_ctlr->slot_device_offset = (readl(php_ctlr->creg + SLOT_CONFIG) & FIRST_DEV_NUM ) >> 8; |
| 1526 | php_ctlr->num_slots = readl(php_ctlr->creg + SLOT_CONFIG) & SLOT_NUM; |
| 1527 | dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset); |
| 1528 | dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots); |
| 1529 | |
| 1530 | /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ |
| 1531 | tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1532 | dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| 1533 | tempdword = 0x0003000f; |
| 1534 | writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1535 | tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1536 | dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| 1537 | |
| 1538 | /* Mask the MRL sensor SERR Mask of individual slot in |
| 1539 | * Slot SERR-INT Mask & clear all the existing event if any |
| 1540 | */ |
| 1541 | for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) { |
| 1542 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot ); |
| 1543 | dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__, |
| 1544 | hp_slot, slot_reg); |
| 1545 | tempdword = 0xffff3fff; |
| 1546 | writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| 1547 | } |
| 1548 | |
| 1549 | if (shpchp_poll_mode) {/* Install interrupt polling code */ |
| 1550 | /* Install and start the interrupt polling timer */ |
| 1551 | init_timer(&php_ctlr->int_poll_timer); |
| 1552 | start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */ |
| 1553 | } else { |
| 1554 | /* Installs the interrupt handler */ |
| 1555 | rc = pci_enable_msi(pdev); |
| 1556 | if (rc) { |
| 1557 | info("Can't get msi for the hotplug controller\n"); |
| 1558 | info("Use INTx for the hotplug controller\n"); |
| 1559 | dbg("%s: rc = %x\n", __FUNCTION__, rc); |
| 1560 | } else |
| 1561 | php_ctlr->irq = pdev->irq; |
| 1562 | |
| 1563 | rc = request_irq(php_ctlr->irq, shpc_isr, SA_SHIRQ, MY_NAME, (void *) ctrl); |
| 1564 | dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc); |
| 1565 | if (rc) { |
| 1566 | err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq); |
| 1567 | goto abort_free_ctlr; |
| 1568 | } |
| 1569 | /* Execute OSHP method here */ |
| 1570 | } |
| 1571 | dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); |
| 1572 | |
| 1573 | /* Add this HPC instance into the HPC list */ |
| 1574 | spin_lock(&list_lock); |
| 1575 | if (php_ctlr_list_head == 0) { |
| 1576 | php_ctlr_list_head = php_ctlr; |
| 1577 | p = php_ctlr_list_head; |
| 1578 | p->pnext = NULL; |
| 1579 | } else { |
| 1580 | p = php_ctlr_list_head; |
| 1581 | |
| 1582 | while (p->pnext) |
| 1583 | p = p->pnext; |
| 1584 | |
| 1585 | p->pnext = php_ctlr; |
| 1586 | } |
| 1587 | spin_unlock(&list_lock); |
| 1588 | |
| 1589 | |
| 1590 | ctlr_seq_num++; |
| 1591 | ctrl->hpc_ctlr_handle = php_ctlr; |
| 1592 | ctrl->hpc_ops = &shpchp_hpc_ops; |
| 1593 | |
| 1594 | for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) { |
| 1595 | slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot ); |
| 1596 | dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__, |
| 1597 | hp_slot, slot_reg); |
| 1598 | tempdword = 0xe01f3fff; |
| 1599 | writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| 1600 | } |
| 1601 | if (!shpchp_poll_mode) { |
| 1602 | /* Unmask all general input interrupts and SERR */ |
| 1603 | tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1604 | tempdword = 0x0000000a; |
| 1605 | writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE); |
| 1606 | tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| 1607 | dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| 1608 | } |
| 1609 | |
| 1610 | dbg("%s: Leaving shpc_init\n", __FUNCTION__); |
| 1611 | DBG_LEAVE_ROUTINE |
| 1612 | return 0; |
| 1613 | |
| 1614 | /* We end up here for the many possible ways to fail this API. */ |
| 1615 | abort_free_ctlr: |
| 1616 | kfree(php_ctlr); |
| 1617 | abort: |
| 1618 | DBG_LEAVE_ROUTINE |
| 1619 | return -1; |
| 1620 | } |