blob: 86af29f53bbebefec7d58ca0c595c3852e6fdf79 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "SCSI device support"
2
James Bottomleyfac829f2010-03-03 11:06:56 +05303config SCSI_MOD
4 tristate
5 default y if SCSI=n || SCSI=y
6 default m if SCSI=m
7
James Bottomley61a7afa2005-08-16 18:27:34 -05008config RAID_ATTRS
9 tristate "RAID Transport Class"
10 default n
David Howells93614012006-09-30 20:45:40 +020011 depends on BLOCK
James Bottomleyfac829f2010-03-03 11:06:56 +053012 depends on SCSI_MOD
James Bottomley61a7afa2005-08-16 18:27:34 -050013 ---help---
14 Provides RAID
15
Linus Torvalds1da177e2005-04-16 15:20:36 -070016config SCSI
17 tristate "SCSI device support"
David Howells93614012006-09-30 20:45:40 +020018 depends on BLOCK
Cornelia Huck7689e822007-07-09 11:59:59 -070019 select SCSI_DMA if HAS_DMA
Linus Torvalds1da177e2005-04-16 15:20:36 -070020 ---help---
21 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
22 any other SCSI device under Linux, say Y and make sure that you know
23 the name of your SCSI host adapter (the card inside your computer
24 that "speaks" the SCSI protocol, also called SCSI controller),
25 because you will be asked for it.
26
27 You also need to say Y here if you have a device which speaks
28 the SCSI protocol. Examples of this include the parallel port
29 version of the IOMEGA ZIP drive, USB storage devices, Fibre
FUJITA Tomonori93c164a2009-01-02 16:12:51 +010030 Channel, and FireWire storage.
Linus Torvalds1da177e2005-04-16 15:20:36 -070031
32 To compile this driver as a module, choose M here and read
33 <file:Documentation/scsi/scsi.txt>.
34 The module will be called scsi_mod.
35
36 However, do not compile this as a module if your root file system
37 (the one containing the directory /) is located on a SCSI device.
38
Cornelia Huck7689e822007-07-09 11:59:59 -070039config SCSI_DMA
40 bool
41 default n
42
FUJITA Tomonori0d2db302006-11-16 19:24:18 +090043config SCSI_TGT
44 tristate "SCSI target support"
Kees Cook92f6ed42013-01-16 18:53:52 -080045 depends on SCSI
FUJITA Tomonori0d2db302006-11-16 19:24:18 +090046 ---help---
47 If you want to use SCSI target mode drivers enable this option.
48 If you choose M, the module will be called scsi_tgt.
49
James Smart84314fd2006-08-18 17:30:09 -040050config SCSI_NETLINK
James Bottomley2b7cbe22006-09-07 15:14:46 -050051 bool
James Smart84314fd2006-08-18 17:30:09 -040052 default n
53 select NET
54
Linus Torvalds1da177e2005-04-16 15:20:36 -070055config SCSI_PROC_FS
56 bool "legacy /proc/scsi/ support"
57 depends on SCSI && PROC_FS
58 default y
59 ---help---
60 This option enables support for the various files in
Matt LaPlante09509602006-10-03 22:31:37 +020061 /proc/scsi. In Linux 2.6 this has been superseded by
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 files in sysfs but many legacy applications rely on this.
63
Matt LaPlante09509602006-10-03 22:31:37 +020064 If unsure say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070065
66comment "SCSI support type (disk, tape, CD-ROM)"
67 depends on SCSI
68
69config BLK_DEV_SD
70 tristate "SCSI disk support"
71 depends on SCSI
Stefan Richterbfad9ce2008-08-02 19:49:40 +020072 select CRC_T10DIF if BLK_DEV_INTEGRITY
Linus Torvalds1da177e2005-04-16 15:20:36 -070073 ---help---
74 If you want to use SCSI hard disks, Fibre Channel disks,
Randy Dunlapabcdceb2007-06-11 11:59:34 -070075 Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
Linus Torvalds1da177e2005-04-16 15:20:36 -070076 USB storage or the SCSI or parallel port version of
77 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
78 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
79 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
80 CD-ROMs.
81
82 To compile this driver as a module, choose M here and read
83 <file:Documentation/scsi/scsi.txt>.
84 The module will be called sd_mod.
85
86 Do not compile this driver as a module if your root file system
87 (the one containing the directory /) is located on a SCSI disk.
88 In this case, do not compile the driver for your SCSI host adapter
89 (below) as a module either.
90
91config CHR_DEV_ST
92 tristate "SCSI tape support"
93 depends on SCSI
94 ---help---
95 If you want to use a SCSI tape drive under Linux, say Y and read the
96 SCSI-HOWTO, available from
97 <http://www.tldp.org/docs.html#howto>, and
98 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
99 for SCSI CD-ROMs.
100
101 To compile this driver as a module, choose M here and read
102 <file:Documentation/scsi/scsi.txt>. The module will be called st.
103
104config CHR_DEV_OSST
105 tristate "SCSI OnStream SC-x0 tape support"
106 depends on SCSI
107 ---help---
Matt LaPlante84eb8d02006-10-03 22:53:09 +0200108 The OnStream SC-x0 SCSI tape drives cannot be driven by the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109 standard st driver, but instead need this special osst driver and
FUJITA Tomonori93c164a2009-01-02 16:12:51 +0100110 use the /dev/osstX char device nodes (major 206). Via usb-storage,
111 you may be able to drive the USB-x0 and DI-x0 drives as well.
112 Note that there is also a second generation of OnStream
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 tape drives (ADR-x0) that supports the standard SCSI-2 commands for
114 tapes (QIC-157) and can be driven by the standard driver st.
115 For more information, you may have a look at the SCSI-HOWTO
116 <http://www.tldp.org/docs.html#howto> and
117 <file:Documentation/scsi/osst.txt> in the kernel source.
118 More info on the OnStream driver may be found on
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200119 <http://sourceforge.net/projects/osst/>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120 Please also have a look at the standard st docu, as most of it
121 applies to osst as well.
122
123 To compile this driver as a module, choose M here and read
124 <file:Documentation/scsi/scsi.txt>. The module will be called osst.
125
126config BLK_DEV_SR
127 tristate "SCSI CDROM support"
128 depends on SCSI
129 ---help---
Alan Coxe7fb6d22009-04-01 15:00:18 +0100130 If you want to use a CD or DVD drive attached to your computer
131 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
132 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
133
134 Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136 To compile this driver as a module, choose M here and read
137 <file:Documentation/scsi/scsi.txt>.
138 The module will be called sr_mod.
139
140config BLK_DEV_SR_VENDOR
141 bool "Enable vendor-specific extensions (for SCSI CDROM)"
142 depends on BLK_DEV_SR
143 help
144 This enables the usage of vendor specific SCSI commands. This is
145 required to support multisession CDs with old NEC/TOSHIBA cdrom
146 drives (and HP Writers). If you have such a drive and get the first
147 session only, try saying Y here; everybody else says N.
148
149config CHR_DEV_SG
150 tristate "SCSI generic support"
151 depends on SCSI
152 ---help---
153 If you want to use SCSI scanners, synthesizers or CD-writers or just
154 about anything having "SCSI" in its name other than hard disks,
155 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
156 directly, so you need some additional software which knows how to
157 talk to these devices using the SCSI protocol:
158
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200159 For scanners, look at SANE (<http://www.sane-project.org/>). For CD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700160 writer software look at Cdrtools
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200161 (<http://cdrecord.berlios.de/private/cdrecord.html>)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700162 and for burning a "disk at once": CDRDAO
163 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
164 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
165 For other devices, it's possible that you'll have to write the
166 driver software yourself. Please read the file
167 <file:Documentation/scsi/scsi-generic.txt> for more information.
168
169 To compile this driver as a module, choose M here and read
170 <file:Documentation/scsi/scsi.txt>. The module will be called sg.
171
172 If unsure, say N.
173
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200174config CHR_DEV_SCH
175 tristate "SCSI media changer support"
176 depends on SCSI
177 ---help---
178 This is a driver for SCSI media changers. Most common devices are
179 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
180 don't need this for those tiny 6-slot cdrom changers. Media
181 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
182 If you have such hardware and want to use it with linux, say Y
Dirk Hohndele4031492007-10-30 13:37:19 -0700183 here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200184
185 If you want to compile this as a module ( = code which can be
186 inserted in and removed from the running kernel whenever you want),
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500187 say M here and read <file:Documentation/kbuild/modules.txt> and
Dirk Hohndele4031492007-10-30 13:37:19 -0700188 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200189 If unsure, say N.
James Bottomley9927c682008-02-03 15:48:56 -0600190
191config SCSI_ENCLOSURE
192 tristate "SCSI Enclosure Support"
193 depends on SCSI && ENCLOSURE_SERVICES
194 help
195 Enclosures are devices sitting on or in SCSI backplanes that
196 manage devices. If you have a disk cage, the chances are that
197 it has an enclosure device. Selecting this option will just allow
198 certain enclosure conditions to be reported and is not required.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200199
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200config SCSI_MULTI_LUN
201 bool "Probe all LUNs on each SCSI device"
202 depends on SCSI
203 help
Eric Piela3ec7232009-05-04 12:43:02 +0200204 Some devices support more than one LUN (Logical Unit Number) in order
205 to allow access to several media, e.g. CD jukebox, USB card reader,
206 mobile phone in mass storage mode. This option forces the kernel to
207 probe for all LUNs by default. This setting can be overriden by
208 max_luns boot/module parameter. Note that this option does not affect
209 devices conforming to SCSI-3 or higher as they can explicitely report
210 their number of LUNs. It is safe to say Y here unless you have one of
211 those rare devices which reacts in an unexpected way when probed for
212 multiple LUNs.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213
214config SCSI_CONSTANTS
215 bool "Verbose SCSI error reporting (kernel size +=12K)"
216 depends on SCSI
217 help
218 The error messages regarding your SCSI hardware will be easier to
219 understand if you say Y here; it will enlarge your kernel by about
220 12 KB. If in doubt, say Y.
221
222config SCSI_LOGGING
223 bool "SCSI logging facility"
224 depends on SCSI
225 ---help---
226 This turns on a logging facility that can be used to debug a number
227 of SCSI related problems.
228
229 If you say Y here, no logging output will appear by default, but you
230 can enable logging by saying Y to "/proc file system support" and
231 "Sysctl support" below and executing the command
232
Robert Love5ef07412009-01-14 11:14:32 -0800233 echo <bitmask> > /proc/sys/dev/scsi/logging_level
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234
Robert Love5ef07412009-01-14 11:14:32 -0800235 where <bitmask> is a four byte value representing the logging type
236 and logging level for each type of logging selected.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237
Robert Love5ef07412009-01-14 11:14:32 -0800238 There are a number of logging types and you can find them in the
239 source at <file:drivers/scsi/scsi_logging.h>. The logging levels
240 are also described in that file and they determine the verbosity of
241 the logging for each logging type.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242
243 If you say N here, it may be harder to track down some types of SCSI
244 problems. If you say Y here your kernel will be somewhat larger, but
245 there should be no noticeable performance impact as long as you have
246 logging turned off.
247
Matthew Wilcox21db1882006-11-22 13:24:52 -0700248config SCSI_SCAN_ASYNC
249 bool "Asynchronous SCSI scanning"
250 depends on SCSI
251 help
252 The SCSI subsystem can probe for devices while the rest of the
253 system continues booting, and even probe devices on different
254 busses in parallel, leading to a significant speed-up.
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100255
Matthew Wilcox21db1882006-11-22 13:24:52 -0700256 If you have built SCSI as modules, enabling this option can
257 be a problem as the devices may not have been found by the
258 time your system expects them to have been. You can load the
259 scsi_wait_scan module to ensure that all scans have completed.
260 If you build your SCSI drivers into the kernel, then everything
261 will work fine if you say Y here.
262
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100263 You can override this choice by specifying "scsi_mod.scan=sync"
264 or async on the kernel's command line.
Matthew Wilcox21db1882006-11-22 13:24:52 -0700265
James Bottomley2908d772006-08-29 09:22:51 -0500266menu "SCSI Transports"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267 depends on SCSI
268
269config SCSI_SPI_ATTRS
270 tristate "Parallel SCSI (SPI) Transport Attributes"
271 depends on SCSI
272 help
273 If you wish to export transport-specific information about
274 each attached SCSI device to sysfs, say Y. Otherwise, say N.
275
276config SCSI_FC_ATTRS
277 tristate "FiberChannel Transport Attributes"
278 depends on SCSI
James Smart84314fd2006-08-18 17:30:09 -0400279 select SCSI_NETLINK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280 help
281 If you wish to export transport-specific information about
282 each attached FiberChannel device to sysfs, say Y.
283 Otherwise, say N.
284
FUJITA Tomonori75252362007-09-01 02:02:27 +0900285config SCSI_FC_TGT_ATTRS
286 bool "SCSI target support for FiberChannel Transport Attributes"
287 depends on SCSI_FC_ATTRS
288 depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
289 help
290 If you want to use SCSI target mode drivers enable this option.
291
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292config SCSI_ISCSI_ATTRS
293 tristate "iSCSI Transport Attributes"
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700294 depends on SCSI && NET
Mike Christie90eeb012011-07-25 13:48:50 -0500295 select BLK_DEV_BSGLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296 help
297 If you wish to export transport-specific information about
298 each attached iSCSI device to sysfs, say Y.
299 Otherwise, say N.
300
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200301config SCSI_SAS_ATTRS
302 tristate "SAS Transport Attributes"
Randy Dunlap47259652010-08-18 09:28:43 -0700303 depends on SCSI
304 select BLK_DEV_BSG
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200305 help
306 If you wish to export transport-specific information about
307 each attached SAS device to sysfs, say Y.
308
James Bottomley2908d772006-08-29 09:22:51 -0500309source "drivers/scsi/libsas/Kconfig"
310
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900311config SCSI_SRP_ATTRS
312 tristate "SRP Transport Attributes"
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900313 depends on SCSI
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900314 help
315 If you wish to export transport-specific information about
316 each attached SRP device to sysfs, say Y.
317
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900318config SCSI_SRP_TGT_ATTRS
319 bool "SCSI target support for SRP Transport Attributes"
320 depends on SCSI_SRP_ATTRS
321 depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
322 help
323 If you want to use SCSI target mode drivers enable this option.
324
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325endmenu
326
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700327menuconfig SCSI_LOWLEVEL
328 bool "SCSI low-level drivers"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329 depends on SCSI!=n
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700330 default y
331
James Bottomley67951f62008-03-06 15:32:06 -0600332if SCSI_LOWLEVEL && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700334config ISCSI_TCP
335 tristate "iSCSI Initiator over TCP/IP"
James Bottomley96bad872005-09-08 09:56:18 -0500336 depends on SCSI && INET
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700337 select CRYPTO
338 select CRYPTO_MD5
339 select CRYPTO_CRC32C
James Bottomley96bad872005-09-08 09:56:18 -0500340 select SCSI_ISCSI_ATTRS
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700341 help
342 The iSCSI Driver provides a host with the ability to access storage
343 through an IP network. The driver uses the iSCSI protocol to transport
344 SCSI requests and responses over a TCP/IP network between the host
345 (the "initiator") and "targets". Architecturally, the iSCSI driver
346 combines with the host's TCP/IP stack, network drivers, and Network
347 Interface Card (NIC) to provide the same functions as a SCSI or a
348 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
349
350 To compile this driver as a module, choose M here: the
351 module will be called iscsi_tcp.
352
353 The userspace component needed to initialize the driver, documentation,
354 and sample configuration files can be found here:
355
FUJITA Tomonoribca10882007-12-13 12:43:31 -0600356 http://open-iscsi.org
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700357
Mike Christieaab7a8f2010-08-02 12:46:12 -0500358config ISCSI_BOOT_SYSFS
359 tristate "iSCSI Boot Sysfs Interface"
360 default n
361 help
362 This option enables support for exposing iSCSI boot information
363 via sysfs to userspace. If you wish to export this information,
364 say Y. Otherwise, say N.
365
kxie@chelsio.com7b36b6e2010-08-16 20:55:53 -0700366source "drivers/scsi/cxgbi/Kconfig"
Michael Chancf4e6362009-06-08 18:14:44 -0700367source "drivers/scsi/bnx2i/Kconfig"
Bhanu Gollapudi853e2bd2011-02-04 12:10:34 -0800368source "drivers/scsi/bnx2fc/Kconfig"
Jayamohan Kallickal6733b392009-09-05 07:36:35 +0530369source "drivers/scsi/be2iscsi/Kconfig"
Karen Xiec3673462008-12-09 14:15:32 -0800370
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371config SGIWD93_SCSI
372 tristate "SGI WD93C93 SCSI Driver"
Thomas Bogendoerfer2adbfa32008-01-27 00:25:53 +0100373 depends on SGI_HAS_WD93 && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374 help
375 If you have a Western Digital WD93 SCSI controller on
376 an SGI MIPS system, say Y. Otherwise, say N.
377
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378config BLK_DEV_3W_XXXX_RAID
379 tristate "3ware 5/6/7/8xxx ATA-RAID support"
380 depends on PCI && SCSI
381 help
382 3ware is the only hardware ATA-Raid product in Linux to date.
383 This card is 2,4, or 8 channel master mode support only.
384 SCSI support required!!!
385
386 <http://www.3ware.com/>
387
388 Please read the comments at the top of
389 <file:drivers/scsi/3w-xxxx.c>.
390
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800391config SCSI_HPSA
392 tristate "HP Smart Array SCSI driver"
393 depends on PCI && SCSI
Akinobu Mita0fc9fd42012-04-04 22:14:59 +0900394 select CHECK_SIGNATURE
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800395 help
396 This driver supports HP Smart Array Controllers (circa 2009).
397 It is a SCSI alternative to the cciss driver, which is a block
398 driver. Anyone wishing to use HP Smart Array controllers who
399 would prefer the devices be presented to linux as SCSI devices,
400 rather than as generic block devices should say Y here.
401
Linus Torvalds1da177e2005-04-16 15:20:36 -0700402config SCSI_3W_9XXX
403 tristate "3ware 9xxx SATA-RAID support"
404 depends on PCI && SCSI
405 help
406 This driver supports the 9000 series 3ware SATA-RAID cards.
407
408 <http://www.amcc.com>
409
410 Please read the comments at the top of
411 <file:drivers/scsi/3w-9xxx.c>.
412
adam radfordf6191062009-10-23 14:52:33 -0700413config SCSI_3W_SAS
414 tristate "3ware 97xx SAS/SATA-RAID support"
415 depends on PCI && SCSI
416 help
417 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
418
419 <http://www.lsi.com>
420
421 Please read the comments at the top of
422 <file:drivers/scsi/3w-sas.c>.
423
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424config SCSI_7000FASST
425 tristate "7000FASST SCSI support"
Al Viroa5532602005-05-04 05:39:42 +0100426 depends on ISA && SCSI && ISA_DMA_API
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700427 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428 help
429 This driver supports the Western Digital 7000 SCSI host adapter
430 family. Some information is in the source:
431 <file:drivers/scsi/wd7000.c>.
432
433 To compile this driver as a module, choose M here: the
434 module will be called wd7000.
435
436config SCSI_ACARD
437 tristate "ACARD SCSI support"
438 depends on PCI && SCSI
439 help
440 This driver supports the ACARD SCSI host adapter.
441 Support Chip <ATP870 ATP876 ATP880 ATP885>
442 To compile this driver as a module, choose M here: the
443 module will be called atp870u.
444
445config SCSI_AHA152X
446 tristate "Adaptec AHA152X/2825 support"
Alan Coxfa7250d2012-07-12 16:40:15 +0100447 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500448 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700449 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450 ---help---
451 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
452 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
453 must be manually specified in this case.
454
455 It is explained in section 3.3 of the SCSI-HOWTO, available from
456 <http://www.tldp.org/docs.html#howto>. You might also want to
457 read the file <file:Documentation/scsi/aha152x.txt>.
458
459 To compile this driver as a module, choose M here: the
460 module will be called aha152x.
461
462config SCSI_AHA1542
463 tristate "Adaptec AHA1542 support"
Al Viroa5532602005-05-04 05:39:42 +0100464 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465 ---help---
466 This is support for a SCSI host adapter. It is explained in section
467 3.4 of the SCSI-HOWTO, available from
468 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
469 purchased by Adaptec, and some former Trantor products are being
470 sold under the Adaptec name. If it doesn't work out of the box, you
471 may have to change some settings in <file:drivers/scsi/aha1542.h>.
472
473 To compile this driver as a module, choose M here: the
474 module will be called aha1542.
475
476config SCSI_AHA1740
477 tristate "Adaptec AHA1740 support"
478 depends on EISA && SCSI
479 ---help---
480 This is support for a SCSI host adapter. It is explained in section
481 3.5 of the SCSI-HOWTO, available from
482 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
483 of the box, you may have to change some settings in
484 <file:drivers/scsi/aha1740.h>.
485
486 To compile this driver as a module, choose M here: the
487 module will be called aha1740.
488
489config SCSI_AACRAID
490 tristate "Adaptec AACRAID support"
491 depends on SCSI && PCI
Adrian Bunk8075f212006-03-20 20:21:24 +0100492 help
493 This driver supports a variety of Dell, HP, Adaptec, IBM and
494 ICP storage products. For a list of supported products, refer
495 to <file:Documentation/scsi/aacraid.txt>.
496
497 To compile this driver as a module, choose M here: the module
498 will be called aacraid.
499
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500
501source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
502
503config SCSI_AIC7XXX_OLD
504 tristate "Adaptec AIC7xxx support (old driver)"
505 depends on (ISA || EISA || PCI ) && SCSI
506 help
507 WARNING This driver is an older aic7xxx driver and is no longer
508 under active development. Adaptec, Inc. is writing a new driver to
509 take the place of this one, and it is recommended that whenever
510 possible, people should use the new Adaptec written driver instead
511 of this one. This driver will eventually be phased out entirely.
512
513 This is support for the various aic7xxx based Adaptec SCSI
514 controllers. These include the 274x EISA cards; 284x VLB cards;
515 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
516 motherboard based SCSI controllers from Adaptec. It does not support
517 the AAA-13x RAID controllers from Adaptec, nor will it likely ever
518 support them. It does not support the 2920 cards from Adaptec that
519 use the Future Domain SCSI controller chip. For those cards, you
520 need the "Future Domain 16xx SCSI support" driver.
521
522 In general, if the controller is based on an Adaptec SCSI controller
523 chip from the aic777x series or the aic78xx series, this driver
524 should work. The only exception is the 7810 which is specifically
525 not supported (that's the RAID controller chip on the AAA-13x
526 cards).
527
528 Note that the AHA2920 SCSI host adapter is *not* supported by this
529 driver; choose "Future Domain 16xx SCSI support" instead if you have
530 one of those.
531
532 Information on the configuration options for this controller can be
533 found by checking the help file for each of the available
534 configuration options. You should read
535 <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
536 contacting the maintainer with any questions. The SCSI-HOWTO,
537 available from <http://www.tldp.org/docs.html#howto>, can also
538 be of great help.
539
540 To compile this driver as a module, choose M here: the
541 module will be called aic7xxx_old.
542
543source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
James Bottomley2908d772006-08-29 09:22:51 -0500544source "drivers/scsi/aic94xx/Kconfig"
Jeff Garzik2ad52f42009-05-08 16:35:37 -0400545source "drivers/scsi/mvsas/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546
Jianyun Lif0c568a2011-05-11 23:22:44 +0800547config SCSI_MVUMI
548 tristate "Marvell UMI driver"
549 depends on SCSI && PCI
550 help
551 Module for Marvell Universal Message Interface(UMI) driver
552
553 To compile this driver as a module, choose M here: the
554 module will be called mvumi.
555
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556config SCSI_DPT_I2O
557 tristate "Adaptec I2O RAID support "
Miquel van Smoorenburg62ac5ae2008-05-02 01:07:27 +0200558 depends on SCSI && PCI && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 help
560 This driver supports all of Adaptec's I2O based RAID controllers as
561 well as the DPT SmartRaid V cards. This is an Adaptec maintained
562 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
563
564 To compile this driver as a module, choose M here: the
565 module will be called dpt_i2o.
566
567config SCSI_ADVANSYS
568 tristate "AdvanSys SCSI support"
Andrew Morton50899562007-10-18 23:39:10 -0700569 depends on SCSI && VIRT_TO_BUS
Linus Torvalds4661e3e2006-04-29 14:27:13 -0700570 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571 help
572 This is a driver for all SCSI host adapters manufactured by
573 AdvanSys. It is documented in the kernel source in
574 <file:drivers/scsi/advansys.c>.
575
576 To compile this driver as a module, choose M here: the
577 module will be called advansys.
578
579config SCSI_IN2000
580 tristate "Always IN2000 SCSI support"
581 depends on ISA && SCSI
582 help
583 This is support for an ISA bus SCSI host adapter. You'll find more
584 information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
585 out of the box, you may have to change the jumpers for IRQ or
586 address selection.
587
588 To compile this driver as a module, choose M here: the
589 module will be called in2000.
590
Erich Chen1c57e862006-07-12 08:59:32 -0700591config SCSI_ARCMSR
Nick Cheng1a4f5502007-09-13 17:26:40 +0800592 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
Erich Chen1c57e862006-07-12 08:59:32 -0700593 depends on PCI && SCSI
594 help
Nick Cheng1a4f5502007-09-13 17:26:40 +0800595 This driver supports all of ARECA's SATA/SAS RAID controller cards.
Erich Chen1c57e862006-07-12 08:59:32 -0700596 This is an ARECA-maintained driver by Erich Chen.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800597 If you have any problems, please mail to: <erich@areca.com.tw>.
Erich Chen1c57e862006-07-12 08:59:32 -0700598 Areca supports Linux RAID config tools.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800599 Please link <http://www.areca.com.tw>
Erich Chen1c57e862006-07-12 08:59:32 -0700600
601 To compile this driver as a module, choose M here: the
602 module will be called arcmsr (modprobe arcmsr).
603
Linus Torvalds1da177e2005-04-16 15:20:36 -0700604source "drivers/scsi/megaraid/Kconfig.megaraid"
Eric Moore635374e2009-03-09 01:21:12 -0600605source "drivers/scsi/mpt2sas/Kconfig"
Sreekanth Reddyf92363d2012-11-30 07:44:21 +0530606source "drivers/scsi/mpt3sas/Kconfig"
Santosh Yaraganavi7a3e97b2012-02-29 12:11:50 +0530607source "drivers/scsi/ufs/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700608
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800609config SCSI_HPTIOP
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800610 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800611 depends on SCSI && PCI
612 help
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800613 This option enables support for HighPoint RocketRAID 3xxx/4xxx
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800614 controllers.
615
616 To compile this driver as a module, choose M here; the module
617 will be called hptiop. If unsure, say N.
618
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619config SCSI_BUSLOGIC
620 tristate "BusLogic SCSI support"
Stephen Rothwellf057eac2007-07-15 23:40:05 -0700621 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700622 ---help---
623 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
624 Adapters. Consult the SCSI-HOWTO, available from
625 <http://www.tldp.org/docs.html#howto>, and the files
626 <file:Documentation/scsi/BusLogic.txt> and
627 <file:Documentation/scsi/FlashPoint.txt> for more information.
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600628 Note that support for FlashPoint is only available for 32-bit
629 x86 configurations.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700630
631 To compile this driver as a module, choose M here: the
632 module will be called BusLogic.
633
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600634config SCSI_FLASHPOINT
635 bool "FlashPoint support"
636 depends on SCSI_BUSLOGIC && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637 help
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600638 This option allows you to add FlashPoint support to the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600640 substantial, so users of MultiMaster Host Adapters may not
641 wish to include it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642
Alok Kataria851b1642009-10-13 14:51:05 -0700643config VMWARE_PVSCSI
644 tristate "VMware PVSCSI driver support"
645 depends on PCI && SCSI && X86
646 help
647 This driver supports VMware's para virtualized SCSI HBA.
648 To compile this driver as a module, choose M here: the
649 module will be called vmw_pvscsi.
650
K. Y. Srinivasan89ae7d72012-02-09 14:14:48 -0800651config HYPERV_STORAGE
652 tristate "Microsoft Hyper-V virtual storage driver"
653 depends on SCSI && HYPERV
654 default HYPERV
655 help
656 Select this option to enable the Hyper-V virtual storage driver.
657
Robert Love42e9a922008-12-09 15:10:17 -0800658config LIBFC
659 tristate "LibFC module"
James Bottomleyfb5edd02008-12-30 09:44:29 -0600660 select SCSI_FC_ATTRS
Randy Dunlapd943aee2009-01-12 10:50:58 -0800661 select CRC32
Robert Love42e9a922008-12-09 15:10:17 -0800662 ---help---
663 Fibre Channel library module
664
Vasu Dev9b34ecf2009-03-17 11:42:13 -0700665config LIBFCOE
666 tristate "LibFCoE module"
667 select LIBFC
668 ---help---
669 Library for Fibre Channel over Ethernet module
670
Robert Love85b4aa42008-12-09 15:10:24 -0800671config FCOE
672 tristate "FCoE module"
James Bottomleyfb5edd02008-12-30 09:44:29 -0600673 depends on PCI
Vasu Dev9b34ecf2009-03-17 11:42:13 -0700674 select LIBFCOE
Robert Love85b4aa42008-12-09 15:10:24 -0800675 ---help---
676 Fibre Channel over Ethernet module
677
Abhijeet Joglekar5df6d732009-04-17 18:33:26 -0700678config FCOE_FNIC
679 tristate "Cisco FNIC Driver"
680 depends on PCI && X86
Joe Eykholt78112e52009-11-03 11:49:22 -0800681 select LIBFCOE
Abhijeet Joglekar5df6d732009-04-17 18:33:26 -0700682 help
683 This is support for the Cisco PCI-Express FCoE HBA.
684
685 To compile this driver as a module, choose M here and read
686 <file:Documentation/scsi/scsi.txt>.
687 The module will be called fnic.
688
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689config SCSI_DMX3191D
690 tristate "DMX3191D SCSI support"
691 depends on PCI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500692 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 help
694 This is support for Domex DMX3191D SCSI Host Adapters.
695
696 To compile this driver as a module, choose M here: the
697 module will be called dmx3191d.
698
699config SCSI_DTC3280
700 tristate "DTC3180/3280 SCSI support"
701 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500702 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700703 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700704 help
705 This is support for DTC 3180/3280 SCSI Host Adapters. Please read
706 the SCSI-HOWTO, available from
707 <http://www.tldp.org/docs.html#howto>, and the file
708 <file:Documentation/scsi/dtc3x80.txt>.
709
710 To compile this driver as a module, choose M here: the
711 module will be called dtc.
712
713config SCSI_EATA
714 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
Al Viroa5532602005-05-04 05:39:42 +0100715 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700716 ---help---
717 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
718 ISA and all EISA I/O addresses are probed looking for the "EATA"
719 signature. The addresses of all the PCI SCSI controllers reported
720 by the PCI subsystem are probed as well.
721
722 You want to read the start of <file:drivers/scsi/eata.c> and the
723 SCSI-HOWTO, available from
724 <http://www.tldp.org/docs.html#howto>.
725
726 To compile this driver as a module, choose M here: the
727 module will be called eata.
728
729config SCSI_EATA_TAGGED_QUEUE
730 bool "enable tagged command queueing"
731 depends on SCSI_EATA
732 help
733 This is a feature of SCSI-2 which improves performance: the host
734 adapter can send several SCSI commands to a device's queue even if
735 previous commands haven't finished yet.
736 This is equivalent to the "eata=tc:y" boot option.
737
738config SCSI_EATA_LINKED_COMMANDS
739 bool "enable elevator sorting"
740 depends on SCSI_EATA
741 help
742 This option enables elevator sorting for all probed SCSI disks and
743 CD-ROMs. It definitely reduces the average seek distance when doing
744 random seeks, but this does not necessarily result in a noticeable
745 performance improvement: your mileage may vary...
746 This is equivalent to the "eata=lc:y" boot option.
747
748config SCSI_EATA_MAX_TAGS
749 int "maximum number of queued commands"
750 depends on SCSI_EATA
751 default "16"
752 help
753 This specifies how many SCSI commands can be maximally queued for
754 each probed SCSI device. You should reduce the default value of 16
755 only if you have disks with buggy or limited tagged command support.
756 Minimum is 2 and maximum is 62. This value is also the window size
757 used by the elevator sorting option above. The effective value used
758 by the driver for each probed SCSI device is reported at boot time.
759 This is equivalent to the "eata=mq:8" boot option.
760
761config SCSI_EATA_PIO
762 tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
763 depends on (ISA || EISA || PCI) && SCSI && BROKEN
764 ---help---
765 This driver supports all EATA-PIO protocol compliant SCSI Host
766 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
767 host adapters could also use this driver but are discouraged from
768 doing so, since this driver only supports hard disks and lacks
769 numerous features. You might want to have a look at the SCSI-HOWTO,
770 available from <http://www.tldp.org/docs.html#howto>.
771
772 To compile this driver as a module, choose M here: the
773 module will be called eata_pio.
774
775config SCSI_FUTURE_DOMAIN
776 tristate "Future Domain 16xx SCSI/AHA-2920A support"
777 depends on (ISA || PCI) && SCSI
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700778 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700779 ---help---
780 This is support for Future Domain's 16-bit SCSI host adapters
781 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
782 other adapters based on the Future Domain chipsets (Quantum
783 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
784 It is explained in section 3.7 of the SCSI-HOWTO, available from
785 <http://www.tldp.org/docs.html#howto>.
786
787 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
788 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
789 controller support"). This Future Domain driver works with the older
790 Adaptec AHA-2920A boards with a Future Domain chip on them.
791
792 To compile this driver as a module, choose M here: the
793 module will be called fdomain.
794
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795config SCSI_GDTH
796 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
Sergio Luis99109302008-02-12 20:48:03 -0300797 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700798 ---help---
799 Formerly called GDT SCSI Disk Array Controller Support.
800
801 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
802 manufactured by Intel Corporation/ICP vortex GmbH. It is documented
803 in the kernel source in <file:drivers/scsi/gdth.c> and
Johann Felix Soden889c94a2008-01-20 14:41:18 +0100804 <file:drivers/scsi/gdth.h>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805
806 To compile this driver as a module, choose M here: the
807 module will be called gdth.
808
Dan Williams6f231dd2011-07-02 22:56:22 -0700809config SCSI_ISCI
810 tristate "Intel(R) C600 Series Chipset SAS Controller"
811 depends on PCI && SCSI
Dan Williams6f231dd2011-07-02 22:56:22 -0700812 depends on X86
Dan Williams6f231dd2011-07-02 22:56:22 -0700813 select SCSI_SAS_LIBSAS
814 ---help---
815 This driver supports the 6Gb/s SAS capabilities of the storage
816 control unit found in the Intel(R) C600 series chipset.
817
Linus Torvalds1da177e2005-04-16 15:20:36 -0700818config SCSI_GENERIC_NCR5380
819 tristate "Generic NCR5380/53c400 SCSI PIO support"
820 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500821 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700822 ---help---
823 This is a driver for the old NCR 53c80 series of SCSI controllers
824 on boards using PIO. Most boards such as the Trantor T130 fit this
825 category, along with a large number of ISA 8bit controllers shipped
826 for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
827 you should select the specific driver for that card rather than
828 generic 5380 support.
829
830 It is explained in section 3.8 of the SCSI-HOWTO, available from
831 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
832 of the box, you may have to change some settings in
833 <file:drivers/scsi/g_NCR5380.h>.
834
835 To compile this driver as a module, choose M here: the
836 module will be called g_NCR5380.
837
838config SCSI_GENERIC_NCR5380_MMIO
839 tristate "Generic NCR5380/53c400 SCSI MMIO support"
840 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500841 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 ---help---
843 This is a driver for the old NCR 53c80 series of SCSI controllers
844 on boards using memory mapped I/O.
845 It is explained in section 3.8 of the SCSI-HOWTO, available from
846 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
847 of the box, you may have to change some settings in
848 <file:drivers/scsi/g_NCR5380.h>.
849
850 To compile this driver as a module, choose M here: the
851 module will be called g_NCR5380_mmio.
852
853config SCSI_GENERIC_NCR53C400
854 bool "Enable NCR53c400 extensions"
855 depends on SCSI_GENERIC_NCR5380
856 help
857 This enables certain optimizations for the NCR53c400 SCSI cards.
858 You might as well try it out. Note that this driver will only probe
859 for the Trantor T130B in its default configuration; you might have
860 to pass a command line option to the kernel at boot time if it does
861 not detect your card. See the file
862 <file:Documentation/scsi/g_NCR5380.txt> for details.
863
Linus Torvalds1da177e2005-04-16 15:20:36 -0700864config SCSI_IPS
865 tristate "IBM ServeRAID support"
866 depends on PCI && SCSI
867 ---help---
868 This is support for the IBM ServeRAID hardware RAID controllers.
869 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200870 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871 for more information. If this driver does not work correctly
872 without modification please contact the author by email at
873 <ipslinux@adaptec.com>.
874
875 To compile this driver as a module, choose M here: the
876 module will be called ips.
877
878config SCSI_IBMVSCSI
879 tristate "IBM Virtual SCSI support"
Stephen Rothwell78347992012-03-07 18:35:38 +0000880 depends on PPC_PSERIES
FUJITA Tomonori4d680412007-06-27 16:32:50 +0900881 select SCSI_SRP_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 help
883 This is the IBM POWER Virtual SCSI Client
884
885 To compile this driver as a module, choose M here: the
Wade Cline46beb542012-12-18 23:11:28 -0800886 module will be called ibmvscsi.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700887
FUJITA Tomonori0e5d0302006-12-01 03:00:54 +0900888config SCSI_IBMVSCSIS
889 tristate "IBM Virtual SCSI Server support"
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900890 depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
FUJITA Tomonori0e5d0302006-12-01 03:00:54 +0900891 help
892 This is the SRP target driver for IBM pSeries virtual environments.
893
894 The userspace component needed to initialize the driver and
895 documentation can be found:
896
897 http://stgt.berlios.de/
898
899 To compile this driver as a module, choose M here: the
900 module will be called ibmvstgt.
901
Brian King072b91f2008-07-01 13:14:30 -0500902config SCSI_IBMVFC
903 tristate "IBM Virtual FC support"
904 depends on PPC_PSERIES && SCSI
905 select SCSI_FC_ATTRS
906 help
907 This is the IBM POWER Virtual FC Client
908
909 To compile this driver as a module, choose M here: the
910 module will be called ibmvfc.
911
912config SCSI_IBMVFC_TRACE
913 bool "enable driver internal trace"
914 depends on SCSI_IBMVFC
915 default y
916 help
917 If you say Y here, the driver will trace all commands issued
918 to the adapter. Performance impact is minimal. Trace can be
919 dumped using /sys/class/scsi_host/hostXX/trace.
920
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921config SCSI_INITIO
922 tristate "Initio 9100U(W) support"
923 depends on PCI && SCSI
924 help
925 This is support for the Initio 91XXU(W) SCSI host adapter. Please
926 read the SCSI-HOWTO, available from
927 <http://www.tldp.org/docs.html#howto>.
928
929 To compile this driver as a module, choose M here: the
930 module will be called initio.
931
932config SCSI_INIA100
933 tristate "Initio INI-A100U2W support"
934 depends on PCI && SCSI
935 help
936 This is support for the Initio INI-A100U2W SCSI host adapter.
937 Please read the SCSI-HOWTO, available from
938 <http://www.tldp.org/docs.html#howto>.
939
940 To compile this driver as a module, choose M here: the
941 module will be called a100u2w.
942
943config SCSI_PPA
944 tristate "IOMEGA parallel port (ppa - older drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800945 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700946 ---help---
947 This driver supports older versions of IOMEGA's parallel port ZIP
948 drive (a 100 MB removable media device).
949
950 Note that you can say N here if you have the SCSI version of the ZIP
951 drive: it will be supported automatically if you said Y to the
952 generic "SCSI disk support", above.
953
954 If you have the ZIP Plus drive or a more recent parallel port ZIP
955 drive (if the supplied cable with the drive is labeled "AutoDetect")
956 then you should say N here and Y to "IOMEGA parallel port (imm -
957 newer drives)", below.
958
959 For more information about this driver and how to use it you should
960 read the file <file:Documentation/scsi/ppa.txt>. You should also read
961 the SCSI-HOWTO, which is available from
962 <http://www.tldp.org/docs.html#howto>. If you use this driver,
963 you will still be able to use the parallel port for other tasks,
964 such as a printer; it is safe to compile both drivers into the
965 kernel.
966
967 To compile this driver as a module, choose M here: the
968 module will be called ppa.
969
970config SCSI_IMM
971 tristate "IOMEGA parallel port (imm - newer drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800972 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700973 ---help---
974 This driver supports newer versions of IOMEGA's parallel port ZIP
975 drive (a 100 MB removable media device).
976
977 Note that you can say N here if you have the SCSI version of the ZIP
978 drive: it will be supported automatically if you said Y to the
979 generic "SCSI disk support", above.
980
981 If you have the ZIP Plus drive or a more recent parallel port ZIP
982 drive (if the supplied cable with the drive is labeled "AutoDetect")
983 then you should say Y here; if you have an older ZIP drive, say N
984 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
985
986 For more information about this driver and how to use it you should
987 read the file <file:Documentation/scsi/ppa.txt>. You should also read
988 the SCSI-HOWTO, which is available from
989 <http://www.tldp.org/docs.html#howto>. If you use this driver,
990 you will still be able to use the parallel port for other tasks,
991 such as a printer; it is safe to compile both drivers into the
992 kernel.
993
994 To compile this driver as a module, choose M here: the
995 module will be called imm.
996
997config SCSI_IZIP_EPP16
998 bool "ppa/imm option - Use slow (but safe) EPP-16"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800999 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -07001000 ---help---
1001 EPP (Enhanced Parallel Port) is a standard for parallel ports which
1002 allows them to act as expansion buses that can handle up to 64
1003 peripheral devices.
1004
1005 Some parallel port chipsets are slower than their motherboard, and
1006 so we have to control the state of the chipset's FIFO queue every
1007 now and then to avoid data loss. This will be done if you say Y
1008 here.
1009
1010 Generally, saying Y is the safe option and slows things down a bit.
1011
1012config SCSI_IZIP_SLOW_CTR
1013 bool "ppa/imm option - Assume slow parport control register"
Marko Kohtala6a19b412006-01-06 00:19:49 -08001014 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015 help
1016 Some parallel ports are known to have excessive delays between
1017 changing the parallel port control register and good data being
1018 available on the parallel port data/status register. This option
1019 forces a small delay (1.0 usec to be exact) after changing the
1020 control register to let things settle out. Enabling this option may
1021 result in a big drop in performance but some very old parallel ports
1022 (found in 386 vintage machines) will not work properly.
1023
1024 Generally, saying N is fine.
1025
1026config SCSI_NCR53C406A
1027 tristate "NCR53c406a SCSI support"
1028 depends on ISA && SCSI
1029 help
1030 This is support for the NCR53c406a SCSI host adapter. For user
1031 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
1032 in the kernel source. Also read the SCSI-HOWTO, available from
1033 <http://www.tldp.org/docs.html#howto>.
1034
1035 To compile this driver as a module, choose M here: the
1036 module will be called NCR53c406.
1037
1038config SCSI_NCR_D700
1039 tristate "NCR Dual 700 MCA SCSI support"
1040 depends on MCA && SCSI
1041 select SCSI_SPI_ATTRS
1042 help
1043 This is a driver for the MicroChannel Dual 700 card produced by
1044 NCR and commonly used in 345x/35xx/4100 class machines. It always
1045 tries to negotiate sync and uses tag command queueing.
1046
1047 Unless you have an NCR manufactured machine, the chances are that
1048 you do not have this SCSI card, so say N.
1049
Linus Torvalds1da177e2005-04-16 15:20:36 -07001050config SCSI_LASI700
1051 tristate "HP Lasi SCSI support for 53c700/710"
1052 depends on GSC && SCSI
1053 select SCSI_SPI_ATTRS
1054 help
1055 This is a driver for the SCSI controller in the Lasi chip found in
1056 many PA-RISC workstations & servers. If you do not know whether you
1057 have a Lasi chip, it is safe to say "Y" here.
1058
Thomas Bogendoerferc27d85f2006-12-25 21:32:04 +01001059config SCSI_SNI_53C710
1060 tristate "SNI RM SCSI support for 53c710"
1061 depends on SNI_RM && SCSI
1062 select SCSI_SPI_ATTRS
1063 select 53C700_LE_ON_BE
1064 help
1065 This is a driver for the onboard SCSI controller found in older
1066 SNI RM workstations & servers.
1067
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068config 53C700_LE_ON_BE
1069 bool
1070 depends on SCSI_LASI700
1071 default y
1072
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001073config SCSI_STEX
1074 tristate "Promise SuperTrak EX Series support"
1075 depends on PCI && SCSI
1076 ---help---
Ed Linee926b22006-12-04 17:49:36 -08001077 This driver supports Promise SuperTrak EX series storage controllers.
1078
1079 Promise provides Linux RAID configuration utility for these
1080 controllers. Please visit <http://www.promise.com> to download.
1081
1082 To compile this driver as a module, choose M here: the
1083 module will be called stex.
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001084
Kars de Jong63273132007-06-17 14:47:05 +02001085config 53C700_BE_BUS
1086 bool
Kars de Jong45804fb2007-06-17 14:47:09 +02001087 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
Kars de Jong63273132007-06-17 14:47:05 +02001088 default y
1089
Linus Torvalds1da177e2005-04-16 15:20:36 -07001090config SCSI_SYM53C8XX_2
1091 tristate "SYM53C8XX Version 2 SCSI support"
1092 depends on PCI && SCSI
1093 select SCSI_SPI_ATTRS
1094 ---help---
1095 This driver supports the whole NCR53C8XX/SYM53C8XX family of
1096 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
1097 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
1098 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
1099 controllers; you need to use the Fusion MPT driver for that.
1100
1101 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
1102 information.
1103
1104config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
1105 int "DMA addressing mode"
1106 depends on SCSI_SYM53C8XX_2
1107 default "1"
1108 ---help---
1109 This option only applies to PCI-SCSI chips that are PCI DAC
1110 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
1111
1112 When set to 0, the driver will program the chip to only perform
1113 32-bit DMA. When set to 1, the chip will be able to perform DMA
1114 to addresses up to 1TB. When set to 2, the driver supports the
1115 full 64-bit DMA address range, but can only address 16 segments
1116 of 4 GB each. This limits the total addressable range to 64 GB.
1117
1118 Most machines with less than 4GB of memory should use a setting
1119 of 0 for best performance. If your machine has 4GB of memory
1120 or more, you should set this option to 1 (the default).
1121
1122 The still experimental value 2 (64 bit DMA addressing with 16
1123 x 4GB segments limitation) can be used on systems that require
1124 PCI address bits past bit 39 to be set for the addressing of
1125 memory using PCI DAC cycles.
1126
1127config SCSI_SYM53C8XX_DEFAULT_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001128 int "Default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129 depends on SCSI_SYM53C8XX_2
1130 default "16"
1131 help
1132 This is the default value of the command queue depth the
1133 driver will announce to the generic SCSI layer for devices
1134 that support tagged command queueing. This value can be changed
1135 from the boot command line. This is a soft limit that cannot
1136 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
1137
1138config SCSI_SYM53C8XX_MAX_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001139 int "Maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001140 depends on SCSI_SYM53C8XX_2
1141 default "64"
1142 help
1143 This option allows you to specify the maximum number of commands
1144 that can be queued to any device, when tagged command queuing is
1145 possible. The driver supports up to 256 queued commands per device.
1146 This value is used as a compiled-in hard limit.
1147
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001148config SCSI_SYM53C8XX_MMIO
1149 bool "Use memory mapped IO"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001150 depends on SCSI_SYM53C8XX_2
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001151 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152 help
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001153 Memory mapped IO is faster than Port IO. Most people should
1154 answer Y here, but some machines may have problems. If you have
1155 to answer N here, please report the problem to the maintainer.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156
1157config SCSI_IPR
1158 tristate "IBM Power Linux RAID adapter support"
Brian King35a39692006-09-25 12:39:20 -05001159 depends on PCI && SCSI && ATA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160 select FW_LOADER
1161 ---help---
1162 This driver supports the IBM Power Linux family RAID adapters.
1163 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
1164 as IBM iSeries 5702, 5703, 5709, and 570A.
1165
1166config SCSI_IPR_TRACE
1167 bool "enable driver internal trace"
1168 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001169 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001170 help
1171 If you say Y here, the driver will trace all commands issued
1172 to the adapter. Performance impact is minimal. Trace can be
1173 dumped using /sys/bus/class/scsi_host/hostXX/trace.
1174
1175config SCSI_IPR_DUMP
1176 bool "enable adapter dump support"
1177 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001178 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001179 help
1180 If you say Y here, the driver will support adapter crash dump.
1181 If you enable this support, the iprdump daemon can be used
1182 to capture adapter failure analysis information.
1183
1184config SCSI_ZALON
1185 tristate "Zalon SCSI support"
1186 depends on GSC && SCSI
1187 select SCSI_SPI_ATTRS
1188 help
1189 The Zalon is a GSC/HSC bus interface chip that sits between the
1190 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1191 C110, J200, J210 and some D, K & R-class machines. It's also
1192 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1193 Say Y here if you have one of these machines or cards.
1194
1195config SCSI_NCR_Q720
1196 tristate "NCR Quad 720 MCA SCSI support"
1197 depends on MCA && SCSI
1198 select SCSI_SPI_ATTRS
1199 help
1200 This is a driver for the MicroChannel Quad 720 card produced by
1201 NCR and commonly used in 345x/35xx/4100 class machines. It always
1202 tries to negotiate sync and uses tag command queueing.
1203
1204 Unless you have an NCR manufactured machine, the chances are that
1205 you do not have this SCSI card, so say N.
1206
1207config SCSI_NCR53C8XX_DEFAULT_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001208 int "default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001209 depends on SCSI_ZALON || SCSI_NCR_Q720
1210 default "8"
1211 ---help---
1212 "Tagged command queuing" is a feature of SCSI-2 which improves
1213 performance: the host adapter can send several SCSI commands to a
1214 device's queue even if previous commands haven't finished yet.
1215 Because the device is intelligent, it can optimize its operations
1216 (like head positioning) based on its own request queue. Some SCSI
1217 devices don't implement this properly; if you want to disable this
1218 feature, enter 0 or 1 here (it doesn't matter which).
1219
1220 The default value is 8 and should be supported by most hard disks.
1221 This value can be overridden from the boot command line using the
1222 'tags' option as follows (example):
1223 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1224 4, set queue depth to 16 for target 2 and target 3 on controller 0
1225 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1226
1227 The normal answer therefore is to go with the default 8 and to use
1228 a boot command line option for devices that need to use a different
1229 command queue depth.
1230
1231 There is no safe option other than using good SCSI devices.
1232
1233config SCSI_NCR53C8XX_MAX_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001234 int "maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001235 depends on SCSI_ZALON || SCSI_NCR_Q720
1236 default "32"
1237 ---help---
1238 This option allows you to specify the maximum number of commands
1239 that can be queued to any device, when tagged command queuing is
1240 possible. The default value is 32. Minimum is 2, maximum is 64.
1241 Modern hard disks are able to support 64 tags and even more, but
1242 do not seem to be faster when more than 32 tags are being used.
1243
1244 So, the normal answer here is to go with the default value 32 unless
1245 you are using very large hard disks with large cache (>= 1 MB) that
1246 are able to take advantage of more than 32 tagged commands.
1247
1248 There is no safe option and the default answer is recommended.
1249
1250config SCSI_NCR53C8XX_SYNC
Roman Zippele55a3e82006-06-08 22:12:49 -07001251 int "synchronous transfers frequency in MHz"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252 depends on SCSI_ZALON || SCSI_NCR_Q720
1253 default "20"
1254 ---help---
1255 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1256 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1257 are respectively the maximum data transfer rates in mega-transfers
1258 per second for each class. For example, a FAST-20 Wide 16 device is
1259 able to transfer data at 20 million 16 bit packets per second for a
1260 total rate of 40 MB/s.
1261
1262 You may specify 0 if you want to only use asynchronous data
1263 transfers. This is the safest and slowest option. Otherwise, specify
1264 a value between 5 and 80, depending on the capability of your SCSI
1265 controller. The higher the number, the faster the data transfer.
1266 Note that 80 should normally be ok since the driver decreases the
1267 value automatically according to the controller's capabilities.
1268
1269 Your answer to this question is ignored for controllers with NVRAM,
1270 since the driver will get this information from the user set-up. It
1271 also can be overridden using a boot setup option, as follows
1272 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1273 for FAST-20 synchronous data transfer (20 mega-transfers per
1274 second).
1275
1276 The normal answer therefore is not to go with the default but to
1277 select the maximum value 80 allowing the driver to use the maximum
1278 value supported by each controller. If this causes problems with
1279 your SCSI devices, you should come back and decrease the value.
1280
1281 There is no safe option other than using good cabling, right
1282 terminations and SCSI conformant devices.
1283
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284config SCSI_NCR53C8XX_NO_DISCONNECT
Roman Zippele55a3e82006-06-08 22:12:49 -07001285 bool "not allow targets to disconnect"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1287 help
1288 This option is only provided for safety if you suspect some SCSI
1289 device of yours to not support properly the target-disconnect
1290 feature. In that case, you would say Y here. In general however, to
1291 not allow targets to disconnect is not reasonable if there is more
1292 than 1 device on a SCSI bus. The normal answer therefore is N.
1293
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294config SCSI_PAS16
1295 tristate "PAS16 SCSI support"
1296 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001297 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001298 ---help---
1299 This is support for a SCSI host adapter. It is explained in section
1300 3.10 of the SCSI-HOWTO, available from
1301 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1302 of the box, you may have to change some settings in
1303 <file:drivers/scsi/pas16.h>.
1304
1305 To compile this driver as a module, choose M here: the
1306 module will be called pas16.
1307
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308config SCSI_QLOGIC_FAS
1309 tristate "Qlogic FAS SCSI support"
1310 depends on ISA && SCSI
1311 ---help---
1312 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1313 FastSCSI! cards as well as any other card based on the FASXX chip
1314 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1315
1316 This driver does NOT support the PCI versions of these cards. The
1317 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1318 SCSI support"), below.
1319
1320 Information about this driver is contained in
1321 <file:Documentation/scsi/qlogicfas.txt>. You should also read the
1322 SCSI-HOWTO, available from
1323 <http://www.tldp.org/docs.html#howto>.
1324
1325 To compile this driver as a module, choose M here: the
1326 module will be called qlogicfas.
1327
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328config SCSI_QLOGIC_1280
1329 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1330 depends on PCI && SCSI
1331 help
1332 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1333
1334 To compile this driver as a module, choose M here: the
1335 module will be called qla1280.
1336
Linus Torvalds1da177e2005-04-16 15:20:36 -07001337config SCSI_QLOGICPTI
1338 tristate "PTI Qlogic, ISP Driver"
1339 depends on SBUS && SCSI
1340 help
1341 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1342 controllers are known under Solaris as qpti and in the openprom as
1343 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1344 driven by a different driver.
1345
1346 To compile this driver as a module, choose M here: the
1347 module will be called qlogicpti.
1348
1349source "drivers/scsi/qla2xxx/Kconfig"
David Somayajuluafaf5a22006-09-19 10:28:00 -07001350source "drivers/scsi/qla4xxx/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001351
dea31012005-04-17 16:05:31 -05001352config SCSI_LPFC
1353 tristate "Emulex LightPulse Fibre Channel Support"
1354 depends on PCI && SCSI
1355 select SCSI_FC_ATTRS
James Bottomley6a7252f2013-05-06 09:49:25 -07001356 select GENERIC_CSUM
1357 select CRC_T10DIF
dea31012005-04-17 16:05:31 -05001358 help
1359 This lpfc driver supports the Emulex LightPulse
1360 Family of Fibre Channel PCI host adapters.
1361
James Smart923e4b62008-12-04 22:40:07 -05001362config SCSI_LPFC_DEBUG_FS
1363 bool "Emulex LightPulse Fibre Channel debugfs Support"
1364 depends on SCSI_LPFC && DEBUG_FS
1365 help
Matt LaPlante692105b2009-01-26 11:12:25 +01001366 This makes debugging information from the lpfc driver
James Smart923e4b62008-12-04 22:40:07 -05001367 available via the debugfs filesystem.
1368
Linus Torvalds1da177e2005-04-16 15:20:36 -07001369config SCSI_SIM710
1370 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1371 depends on (EISA || MCA) && SCSI
1372 select SCSI_SPI_ATTRS
1373 ---help---
Matt LaPlante692105b2009-01-26 11:12:25 +01001374 This driver is for NCR53c710 based SCSI host adapters.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001375
1376 It currently supports Compaq EISA cards and NCR MCA cards
1377
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378config SCSI_SYM53C416
1379 tristate "Symbios 53c416 SCSI support"
1380 depends on ISA && SCSI
1381 ---help---
1382 This is support for the sym53c416 SCSI host adapter, the SCSI
1383 adapter that comes with some HP scanners. This driver requires that
1384 the sym53c416 is configured first using some sort of PnP
1385 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
1386 are using isapnp then you need to compile this driver as a module
1387 and then load it using insmod after isapnp has run. The parameters
1388 of the configured card(s) should be passed to the driver. The format
1389 is:
1390
1391 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
1392
1393 To compile this driver as a module, choose M here: the
1394 module will be called sym53c416.
1395
1396config SCSI_DC395x
Kees Cook92f6ed42013-01-16 18:53:52 -08001397 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1398 depends on PCI && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001399 ---help---
1400 This driver supports PCI SCSI host adapters based on the ASIC
1401 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1402
1403 This driver works, but is still in experimental status. So better
1404 have a bootable disk and a backup in case of emergency.
1405
1406 Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
1407
1408 To compile this driver as a module, choose M here: the
1409 module will be called dc395x.
1410
1411config SCSI_DC390T
1412 tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
1413 depends on PCI && SCSI
1414 ---help---
1415 This driver supports PCI SCSI host adapters based on the Am53C974A
1416 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1417 PCscsi/PCnet (Am53/79C974) solutions.
1418
1419 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
1420
1421 Note that this driver does NOT support Tekram DC390W/U/F, which are
1422 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1423
1424 To compile this driver as a module, choose M here: the
1425 module will be called tmscsim.
1426
1427config SCSI_T128
1428 tristate "Trantor T128/T128F/T228 SCSI support"
1429 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001430 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -07001431 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001432 ---help---
1433 This is support for a SCSI host adapter. It is explained in section
1434 3.11 of the SCSI-HOWTO, available from
1435 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1436 of the box, you may have to change some settings in
1437 <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
1438 Adaptec, and some former Trantor products are being sold under the
1439 Adaptec name.
1440
1441 To compile this driver as a module, choose M here: the
1442 module will be called t128.
1443
1444config SCSI_U14_34F
1445 tristate "UltraStor 14F/34F support"
Al Viroa5532602005-05-04 05:39:42 +01001446 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001447 ---help---
1448 This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
1449 The source at <file:drivers/scsi/u14-34f.c> contains some
1450 information about this hardware. If the driver doesn't work out of
1451 the box, you may have to change some settings in
1452 <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
1453 <http://www.tldp.org/docs.html#howto>. Note that there is also
1454 another driver for the same hardware: "UltraStor SCSI support",
1455 below. You should say Y to both only if you want 24F support as
1456 well.
1457
1458 To compile this driver as a module, choose M here: the
1459 module will be called u14-34f.
1460
1461config SCSI_U14_34F_TAGGED_QUEUE
1462 bool "enable tagged command queueing"
1463 depends on SCSI_U14_34F
1464 help
1465 This is a feature of SCSI-2 which improves performance: the host
1466 adapter can send several SCSI commands to a device's queue even if
1467 previous commands haven't finished yet.
1468 This is equivalent to the "u14-34f=tc:y" boot option.
1469
1470config SCSI_U14_34F_LINKED_COMMANDS
1471 bool "enable elevator sorting"
1472 depends on SCSI_U14_34F
1473 help
1474 This option enables elevator sorting for all probed SCSI disks and
1475 CD-ROMs. It definitely reduces the average seek distance when doing
1476 random seeks, but this does not necessarily result in a noticeable
1477 performance improvement: your mileage may vary...
1478 This is equivalent to the "u14-34f=lc:y" boot option.
1479
1480config SCSI_U14_34F_MAX_TAGS
1481 int "maximum number of queued commands"
1482 depends on SCSI_U14_34F
1483 default "8"
1484 help
1485 This specifies how many SCSI commands can be maximally queued for
1486 each probed SCSI device. You should reduce the default value of 8
1487 only if you have disks with buggy or limited tagged command support.
1488 Minimum is 2 and maximum is 14. This value is also the window size
1489 used by the elevator sorting option above. The effective value used
1490 by the driver for each probed SCSI device is reported at boot time.
1491 This is equivalent to the "u14-34f=mq:8" boot option.
1492
1493config SCSI_ULTRASTOR
1494 tristate "UltraStor SCSI support"
1495 depends on X86 && ISA && SCSI
1496 ---help---
1497 This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
1498 adapter family. This driver is explained in section 3.12 of the
1499 SCSI-HOWTO, available from
1500 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1501 of the box, you may have to change some settings in
1502 <file:drivers/scsi/ultrastor.h>.
1503
1504 Note that there is also another driver for the same hardware:
1505 "UltraStor 14F/34F support", above.
1506
1507 To compile this driver as a module, choose M here: the
1508 module will be called ultrastor.
1509
1510config SCSI_NSP32
1511 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1512 depends on PCI && SCSI && !64BIT
1513 help
1514 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1515 SCSI host adapter. Please read the SCSI-HOWTO, available from
1516 <http://www.tldp.org/docs.html#howto>.
1517
1518 To compile this driver as a module, choose M here: the
1519 module will be called nsp32.
1520
1521config SCSI_DEBUG
1522 tristate "SCSI debugging host simulator"
1523 depends on SCSI
Randy Dunlapd0ace3c2009-01-12 10:53:04 -08001524 select CRC_T10DIF
Linus Torvalds1da177e2005-04-16 15:20:36 -07001525 help
1526 This is a host adapter simulator that can simulate multiple hosts
1527 each with multiple dummy SCSI devices (disks). It defaults to one
1528 host adapter with one dummy SCSI disk. Each dummy disk uses kernel
1529 RAM as storage (i.e. it is a ramdisk). To save space when multiple
1530 dummy disks are simulated, they share the same kernel RAM for
Justin P. Mattock631dd1a2010-10-18 11:03:14 +02001531 their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -07001532 information. This driver is primarily of use to those testing the
1533 SCSI and block subsystems. If unsure, say N.
1534
1535config SCSI_MESH
1536 tristate "MESH (Power Mac internal SCSI) support"
1537 depends on PPC32 && PPC_PMAC && SCSI
1538 help
1539 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1540 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1541 other Power Macintoshes do). Say Y to include support for this SCSI
1542 adaptor.
1543
1544 To compile this driver as a module, choose M here: the
1545 module will be called mesh.
1546
1547config SCSI_MESH_SYNC_RATE
1548 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1549 depends on SCSI_MESH
1550 default "5"
1551 help
1552 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1553 drives a bus which is entirely internal to the machine (such as the
1554 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1555 operation at up to 10 MB/s. On machines where the SCSI bus
1556 controlled by the MESH can have external devices connected, it is
1557 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1558 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1559 to disable synchronous operation.
1560
1561config SCSI_MESH_RESET_DELAY_MS
1562 int "initial bus reset delay (ms) (0 = no reset)"
1563 depends on SCSI_MESH
1564 default "4000"
1565
1566config SCSI_MAC53C94
1567 tristate "53C94 (Power Mac external SCSI) support"
1568 depends on PPC32 && PPC_PMAC && SCSI
1569 help
1570 On Power Macintoshes (and clones) with two SCSI buses, the external
1571 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1572 machines which only have one SCSI bus, such as the 7200, also use
1573 the 53C94. Say Y to include support for the 53C94.
1574
1575 To compile this driver as a module, choose M here: the
1576 module will be called mac53c94.
1577
1578source "drivers/scsi/arm/Kconfig"
1579
1580config JAZZ_ESP
1581 bool "MIPS JAZZ FAS216 SCSI support"
1582 depends on MACH_JAZZ && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001583 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584 help
1585 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1586 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1587 systems.
1588
1589config A3000_SCSI
1590 tristate "A3000 WD33C93A support"
1591 depends on AMIGA && SCSI
1592 help
1593 If you have an Amiga 3000 and have SCSI devices connected to the
1594 built-in SCSI controller, say Y. Otherwise, say N.
1595
1596 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001597 module will be called a3000.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001598
1599config A2091_SCSI
1600 tristate "A2091/A590 WD33C93A support"
1601 depends on ZORRO && SCSI
1602 help
1603 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1604 say N.
1605
1606 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001607 module will be called a2091.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001608
1609config GVP11_SCSI
1610 tristate "GVP Series II WD33C93A support"
1611 depends on ZORRO && SCSI
1612 ---help---
1613 If you have a Great Valley Products Series II SCSI controller,
1614 answer Y. Also say Y if you have a later model of GVP SCSI
1615 controller (such as the GVP A4008 or a Combo board). Otherwise,
1616 answer N. This driver does NOT work for the T-Rex series of
1617 accelerators from TekMagic and GVP-M.
1618
1619 To compile this driver as a module, choose M here: the
1620 module will be called gvp11.
1621
Kars de Jonga16efc12007-06-17 14:47:08 +02001622config SCSI_A4000T
Kees Cook92f6ed42013-01-16 18:53:52 -08001623 tristate "A4000T NCR53c710 SCSI support"
1624 depends on AMIGA && SCSI
Kars de Jonga16efc12007-06-17 14:47:08 +02001625 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001626 help
Kars de Jonga16efc12007-06-17 14:47:08 +02001627 If you have an Amiga 4000T and have SCSI devices connected to the
1628 built-in SCSI controller, say Y. Otherwise, say N.
1629
1630 To compile this driver as a module, choose M here: the
1631 module will be called a4000t.
1632
Kars de Jong45804fb2007-06-17 14:47:09 +02001633config SCSI_ZORRO7XX
Kees Cook92f6ed42013-01-16 18:53:52 -08001634 tristate "Zorro NCR53c710 SCSI support"
1635 depends on ZORRO && SCSI
Kars de Jong45804fb2007-06-17 14:47:09 +02001636 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001637 help
Kars de Jong45804fb2007-06-17 14:47:09 +02001638 Support for various NCR53c710-based SCSI controllers on Zorro
1639 expansion boards for the Amiga.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001640 This includes:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001641 - the Amiga 4091 Zorro III SCSI-2 controller,
1642 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1643 (info at
1644 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1645 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1646 accelerator card for the Amiga 1200,
1647 - the SCSI controller on the GVP Turbo 040/060 accelerator.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001648
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649config ATARI_SCSI
1650 tristate "Atari native SCSI support"
Michael Schmitzfb810d12007-05-01 22:32:35 +02001651 depends on ATARI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001652 select SCSI_SPI_ATTRS
Geert Uytterhoevenfff11c02008-10-13 21:59:02 +02001653 select NVRAM
Linus Torvalds1da177e2005-04-16 15:20:36 -07001654 ---help---
1655 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1656 Falcon, ...) say Y to get it supported. Of course also, if you have
1657 a compatible SCSI controller (e.g. for Medusa).
1658
1659 To compile this driver as a module, choose M here: the
1660 module will be called atari_scsi.
1661
1662 This driver supports both styles of NCR integration into the
1663 system: the TT style (separate DMA), and the Falcon style (via
1664 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1665 in the Hades (without DMA).
1666
1667config ATARI_SCSI_TOSHIBA_DELAY
1668 bool "Long delays for Toshiba CD-ROMs"
1669 depends on ATARI_SCSI
1670 help
1671 This option increases the delay after a SCSI arbitration to
1672 accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
1673 use a Toshiba CD-ROM drive; otherwise, the option is not needed and
1674 would impact performance a bit, so say N.
1675
1676config ATARI_SCSI_RESET_BOOT
1677 bool "Reset SCSI-devices at boottime"
1678 depends on ATARI_SCSI
1679 help
1680 Reset the devices on your Atari whenever it boots. This makes the
1681 boot process fractionally longer but may assist recovery from errors
1682 that leave the devices with SCSI operations partway completed.
1683
Linus Torvalds1da177e2005-04-16 15:20:36 -07001684config MAC_SCSI
1685 bool "Macintosh NCR5380 SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001686 depends on MAC && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001687 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001688 help
1689 This is the NCR 5380 SCSI controller included on most of the 68030
1690 based Macintoshes. If you have one of these say Y and read the
1691 SCSI-HOWTO, available from
1692 <http://www.tldp.org/docs.html#howto>.
1693
Finn Thain6fe07aa2008-04-25 10:06:05 -05001694config SCSI_MAC_ESP
1695 tristate "Macintosh NCR53c9[46] SCSI"
1696 depends on MAC && SCSI
Geert Uytterhoeven48fc8de2008-05-05 21:27:21 +02001697 select SCSI_SPI_ATTRS
Finn Thain6fe07aa2008-04-25 10:06:05 -05001698 help
1699 This is the NCR 53c9x SCSI controller found on most of the 68040
1700 based Macintoshes.
1701
1702 To compile this driver as a module, choose M here: the module
1703 will be called mac_esp.
1704
Linus Torvalds1da177e2005-04-16 15:20:36 -07001705config MVME147_SCSI
1706 bool "WD33C93 SCSI driver for MVME147"
Al Virofa53bb62005-08-23 22:48:07 +01001707 depends on MVME147 && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001708 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001709 help
1710 Support for the on-board SCSI controller on the Motorola MVME147
1711 single-board computer.
1712
1713config MVME16x_SCSI
Kars de Jong506c7bb2007-06-17 14:47:07 +02001714 tristate "NCR53C710 SCSI driver for MVME16x"
1715 depends on MVME16x && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001716 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001717 help
1718 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1719 SCSI controller chip. Almost everyone using one of these boards
1720 will want to say Y to this question.
1721
1722config BVME6000_SCSI
Kars de Jong8276b582007-06-17 14:47:06 +02001723 tristate "NCR53C710 SCSI driver for BVME6000"
1724 depends on BVME6000 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001725 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001726 help
1727 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1728 SCSI controller chip. Almost everyone using one of these boards
1729 will want to say Y to this question.
1730
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731config SUN3_SCSI
1732 tristate "Sun3 NCR5380 SCSI"
Sam Creaseyc39e7ee2006-12-09 10:37:05 +01001733 depends on SUN3 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001734 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 help
1736 This option will enable support for the OBIO (onboard io) NCR5380
1737 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1738 "Sun3" type VME scsi controllers also based on the NCR5380.
1739 General Linux information on the Sun 3 series (now discontinued)
1740 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1741
1742config SUN3X_ESP
1743 bool "Sun3x ESP SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001744 depends on SUN3X && SCSI=y
Thomas Bogendoerfer0bb67f12008-02-01 00:13:34 +01001745 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001746 help
1747 The ESP was an on-board SCSI controller used on Sun 3/80
1748 machines. Say Y here to compile in support for it.
1749
1750config SCSI_SUNESP
1751 tristate "Sparc ESP Scsi Driver"
1752 depends on SBUS && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001753 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001754 help
1755 This is the driver for the Sun ESP SCSI host adapter. The ESP
Frans Popdbfe54a2008-06-19 20:20:12 -07001756 chipset is present in most SPARC SBUS-based computers and
1757 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1758 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001759
1760 To compile this driver as a module, choose M here: the
Frans Popdbfe54a2008-06-19 20:20:12 -07001761 module will be called sun_esp.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001762
Linus Torvalds1da177e2005-04-16 15:20:36 -07001763config ZFCP
1764 tristate "FCP host bus adapter driver for IBM eServer zSeries"
Martin Schwidefsky347a8dc2006-01-06 00:19:28 -08001765 depends on S390 && QDIO && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001766 select SCSI_FC_ATTRS
1767 help
1768 If you want to access SCSI devices attached to your IBM eServer
1769 zSeries by means of Fibre Channel interfaces say Y.
1770 For details please refer to the documentation provided by IBM at
1771 <http://oss.software.ibm.com/developerworks/opensource/linux390>
1772
1773 This driver is also available as a module. This module will be
1774 called zfcp. If you want to compile it as a module, say M here
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001775 and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776
Anil Ravindranath89a36812009-08-25 17:35:18 -07001777config SCSI_PMCRAID
1778 tristate "PMC SIERRA Linux MaxRAID adapter support"
Randy Dunlapb2045242010-08-10 18:01:24 -07001779 depends on PCI && SCSI && NET
Anil Ravindranath89a36812009-08-25 17:35:18 -07001780 ---help---
1781 This driver supports the PMC SIERRA MaxRAID adapters.
1782
jack wangdbf9bfe2009-10-14 16:19:21 +08001783config SCSI_PM8001
1784 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1785 depends on PCI && SCSI
1786 select SCSI_SAS_LIBSAS
1787 help
1788 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1789 based host adapters.
1790
FUJITA Tomonori26b14822006-12-01 03:00:50 +09001791config SCSI_SRP
1792 tristate "SCSI RDMA Protocol helper library"
1793 depends on SCSI && PCI
1794 select SCSI_TGT
1795 help
1796 If you wish to use SRP target drivers, say Y.
1797
1798 To compile this driver as a module, choose M here: the
1799 module will be called libsrp.
1800
Jing Huang7725ccf2009-09-23 17:46:15 -07001801config SCSI_BFA_FC
1802 tristate "Brocade BFA Fibre Channel Support"
1803 depends on PCI && SCSI
1804 select SCSI_FC_ATTRS
1805 help
1806 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1807
1808 To compile this driver as a module, choose M here. The module will
1809 be called bfa.
1810
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001811config SCSI_VIRTIO
Kees Cook92f6ed42013-01-16 18:53:52 -08001812 tristate "virtio-scsi support"
1813 depends on VIRTIO
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001814 help
1815 This is the virtual HBA driver for virtio. If the kernel will
1816 be used in a virtual machine, say Y or M.
1817
Naresh Kumar Innaa3667aa2012-11-15 22:41:18 +05301818source "drivers/scsi/csiostor/Kconfig"
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001819
Jan Engelhardtfc6e7402007-07-09 12:00:08 -07001820endif # SCSI_LOWLEVEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001821
1822source "drivers/scsi/pcmcia/Kconfig"
1823
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -07001824source "drivers/scsi/device_handler/Kconfig"
1825
Boaz Harrosh68274792009-01-25 17:24:14 +02001826source "drivers/scsi/osd/Kconfig"
1827
Linus Torvalds1da177e2005-04-16 15:20:36 -07001828endmenu