Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 347a8dc3b815f0c0fa62a1df075184ffe4cbdcf1 / . / drivers / char / ip2main.c
blob: d815d197dc3e331daee13bfbfa3e1dd7ba37dddb [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*
2*
3* (c) 1999 by Computone Corporation
4*
5********************************************************************************
6*
7* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
8* serial I/O controllers.
9*
10* DESCRIPTION: Mainline code for the device driver
11*
12*******************************************************************************/
13// ToDo:
14//
15// Fix the immediate DSS_NOW problem.
16// Work over the channel stats return logic in ip2_ipl_ioctl so they
17// make sense for all 256 possible channels and so the user space
18// utilities will compile and work properly.
19//
20// Done:
21//
22// 1.2.14 /\/\|=mhw=|\/\/
23// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
24// Changed the definition of ip2trace to be more consistent with kernel style
25// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
26//
27// 1.2.13 /\/\|=mhw=|\/\/
28// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
29// to agreed devfs serial device naming convention.
30//
31// 1.2.12 /\/\|=mhw=|\/\/
32// Cleaned up some remove queue cut and paste errors
33//
34// 1.2.11 /\/\|=mhw=|\/\/
35// Clean up potential NULL pointer dereferences
36// Clean up devfs registration
37// Add kernel command line parsing for io and irq
38// Compile defaults for io and irq are now set in ip2.c not ip2/ip2.h!
39// Reworked poll_only hack for explicit parameter setting
40// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
41// Merged ip2_loadmain and old_ip2_init
42// Converted all instances of interruptible_sleep_on into queue calls
43// Most of these had no race conditions but better to clean up now
44//
45// 1.2.10 /\/\|=mhw=|\/\/
46// Fixed the bottom half interrupt handler and enabled USE_IQI
47// to split the interrupt handler into a formal top-half / bottom-half
48// Fixed timing window on high speed processors that queued messages to
49// the outbound mail fifo faster than the board could handle.
50//
51// 1.2.9
52// Four box EX was barfing on >128k kmalloc, made structure smaller by
53// reducing output buffer size
54//
55// 1.2.8
56// Device file system support (MHW)
57//
58// 1.2.7
59// Fixed
60// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
61//
62// 1.2.6
63//Fixes DCD problems
64// DCD was not reported when CLOCAL was set on call to TIOCMGET
65//
66//Enhancements:
67// TIOCMGET requests and waits for status return
68// No DSS interrupts enabled except for DCD when needed
69//
70// For internal use only
71//
72//#define IP2DEBUG_INIT
73//#define IP2DEBUG_OPEN
74//#define IP2DEBUG_WRITE
75//#define IP2DEBUG_READ
76//#define IP2DEBUG_IOCTL
77//#define IP2DEBUG_IPL
78
79//#define IP2DEBUG_TRACE
80//#define DEBUG_FIFO
81
82/************/
83/* Includes */
84/************/
85#include <linux/config.h>
86
87#include <linux/ctype.h>
88#include <linux/string.h>
89#include <linux/fcntl.h>
90#include <linux/errno.h>
91#include <linux/module.h>
92#include <linux/signal.h>
93#include <linux/sched.h>
94#include <linux/devfs_fs_kernel.h>
95#include <linux/timer.h>
96#include <linux/interrupt.h>
97#include <linux/pci.h>
98#include <linux/mm.h>
99#include <linux/slab.h>
100#include <linux/major.h>
101#include <linux/wait.h>
102#include <linux/device.h>
103
104#include <linux/tty.h>
105#include <linux/tty_flip.h>
106#include <linux/termios.h>
107#include <linux/tty_driver.h>
108#include <linux/serial.h>
109#include <linux/ptrace.h>
110#include <linux/ioport.h>
111
112#include <linux/cdk.h>
113#include <linux/comstats.h>
114#include <linux/delay.h>
115#include <linux/bitops.h>
116
117#include <asm/system.h>
118#include <asm/io.h>
119#include <asm/irq.h>
120
121#include <linux/vmalloc.h>
122#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]123
124#include <asm/uaccess.h>
125
126#include "./ip2/ip2types.h"
127#include "./ip2/ip2trace.h"
128#include "./ip2/ip2ioctl.h"
129#include "./ip2/ip2.h"
130#include "./ip2/i2ellis.h"
131#include "./ip2/i2lib.h"
132
133/*****************
134 * /proc/ip2mem *
135 *****************/
136
137#include <linux/proc_fs.h>
138
139static int ip2_read_procmem(char *, char **, off_t, int);
140static int ip2_read_proc(char *, char **, off_t, int, int *, void * );
141
142/********************/
143/* Type Definitions */
144/********************/
145
146/*************/
147/* Constants */
148/*************/
149
150/* String constants to identify ourselves */
151static char *pcName = "Computone IntelliPort Plus multiport driver";
152static char *pcVersion = "1.2.14";
153
154/* String constants for port names */
155static char *pcDriver_name = "ip2";
156static char *pcIpl = "ip2ipl";
157
158/* Serial subtype definitions */
159#define SERIAL_TYPE_NORMAL 1
160
161// cheezy kludge or genius - you decide?
162int ip2_loadmain(int *, int *, unsigned char *, int);
163static unsigned char *Fip_firmware;
164static int Fip_firmware_size;
165
166/***********************/
167/* Function Prototypes */
168/***********************/
169
170/* Global module entry functions */
171
172/* Private (static) functions */
173static int ip2_open(PTTY, struct file *);
174static void ip2_close(PTTY, struct file *);
175static int ip2_write(PTTY, int, const unsigned char *, int);
176static void ip2_putchar(PTTY, unsigned char);
177static void ip2_flush_chars(PTTY);
178static int ip2_write_room(PTTY);
179static int ip2_chars_in_buf(PTTY);
180static void ip2_flush_buffer(PTTY);
181static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
182static void ip2_set_termios(PTTY, struct termios *);
183static void ip2_set_line_discipline(PTTY);
184static void ip2_throttle(PTTY);
185static void ip2_unthrottle(PTTY);
186static void ip2_stop(PTTY);
187static void ip2_start(PTTY);
188static void ip2_hangup(PTTY);
189static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
190static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
191 unsigned int set, unsigned int clear);
192
193static void set_irq(int, int);
194static void ip2_interrupt_bh(i2eBordStrPtr pB);
195static irqreturn_t ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs);
196static void ip2_poll(unsigned long arg);
197static inline void service_all_boards(void);
198static void do_input(void *p);
199static void do_status(void *p);
200
201static void ip2_wait_until_sent(PTTY,int);
202
203static void set_params (i2ChanStrPtr, struct termios *);
204static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
205static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
206
207static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
208static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
209static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG);
210static int ip2_ipl_open(struct inode *, struct file *);
211
212static int DumpTraceBuffer(char __user *, int);
213static int DumpFifoBuffer( char __user *, int);
214
215static void ip2_init_board(int);
216static unsigned short find_eisa_board(int);
217
218/***************/
219/* Static Data */
220/***************/
221
222static struct tty_driver *ip2_tty_driver;
223
224/* Here, then is a table of board pointers which the interrupt routine should
225 * scan through to determine who it must service.
226 */
227static unsigned short i2nBoards; // Number of boards here
228
229static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
230
231static i2ChanStrPtr DevTable[IP2_MAX_PORTS];
232//DevTableMem just used to save addresses for kfree
233static void *DevTableMem[IP2_MAX_BOARDS];
234
235/* This is the driver descriptor for the ip2ipl device, which is used to
236 * download the loadware to the boards.
237 */
238static struct file_operations ip2_ipl = {
239 .owner = THIS_MODULE,
240 .read = ip2_ipl_read,
241 .write = ip2_ipl_write,
242 .ioctl = ip2_ipl_ioctl,
243 .open = ip2_ipl_open,
244};
245
246static unsigned long irq_counter = 0;
247static unsigned long bh_counter = 0;
248
249// Use immediate queue to service interrupts
250#define USE_IQI
251//#define USE_IQ // PCI&2.2 needs work
252
253/* The timer_list entry for our poll routine. If interrupt operation is not
254 * selected, the board is serviced periodically to see if anything needs doing.
255 */
256#define POLL_TIMEOUT (jiffies + 1)
Ingo Molnar8d06afa2005-09-09 13:10:40 -0700[diff] [blame]257static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]258static char TimerOn;
259
260#ifdef IP2DEBUG_TRACE
261/* Trace (debug) buffer data */
262#define TRACEMAX 1000
263static unsigned long tracebuf[TRACEMAX];
264static int tracestuff;
265static int tracestrip;
266static int tracewrap;
267#endif
268
269/**********/
270/* Macros */
271/**********/
272
273#if defined(MODULE) && defined(IP2DEBUG_OPEN)
274#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \
275 tty->name,(pCh->flags),ip2_tty_driver->refcount, \
276 tty->count,/*GET_USE_COUNT(module)*/0,s)
277#else
278#define DBG_CNT(s)
279#endif
280
281/********/
282/* Code */
283/********/
284
285#include "./ip2/i2ellis.c" /* Extremely low-level interface services */
286#include "./ip2/i2cmd.c" /* Standard loadware command definitions */
287#include "./ip2/i2lib.c" /* High level interface services */
288
289/* Configuration area for modprobe */
290
291MODULE_AUTHOR("Doug McNash");
292MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
293
294static int poll_only = 0;
295
296static int Eisa_irq;
297static int Eisa_slot;
298
299static int iindx;
300static char rirqs[IP2_MAX_BOARDS];
301static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
302
303/* for sysfs class support */
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]304static struct class *ip2_class;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]305
306// Some functions to keep track of what irq's we have
307
308static int __init
309is_valid_irq(int irq)
310{
311 int *i = Valid_Irqs;
312
313 while ((*i != 0) && (*i != irq)) {
314 i++;
315 }
316 return (*i);
317}
318
319static void __init
320mark_requested_irq( char irq )
321{
322 rirqs[iindx++] = irq;
323}
324
325#ifdef MODULE
326static int __init
327clear_requested_irq( char irq )
328{
329 int i;
330 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
331 if (rirqs[i] == irq) {
332 rirqs[i] = 0;
333 return 1;
334 }
335 }
336 return 0;
337}
338#endif
339
340static int __init
341have_requested_irq( char irq )
342{
343 // array init to zeros so 0 irq will not be requested as a side effect
344 int i;
345 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
346 if (rirqs[i] == irq)
347 return 1;
348 }
349 return 0;
350}
351
352/******************************************************************************/
353/* Function: init_module() */
354/* Parameters: None */
355/* Returns: Success (0) */
356/* */
357/* Description: */
358/* This is a required entry point for an installable module. It simply calls */
359/* the driver initialisation function and returns what it returns. */
360/******************************************************************************/
361#ifdef MODULE
362int
363init_module(void)
364{
365#ifdef IP2DEBUG_INIT
366 printk (KERN_DEBUG "Loading module ...\n" );
367#endif
368 return 0;
369}
370#endif /* MODULE */
371
372/******************************************************************************/
373/* Function: cleanup_module() */
374/* Parameters: None */
375/* Returns: Nothing */
376/* */
377/* Description: */
378/* This is a required entry point for an installable module. It has to return */
379/* the device and the driver to a passive state. It should not be necessary */
380/* to reset the board fully, especially as the loadware is downloaded */
381/* externally rather than in the driver. We just want to disable the board */
382/* and clear the loadware to a reset state. To allow this there has to be a */
383/* way to detect whether the board has the loadware running at init time to */
384/* handle subsequent installations of the driver. All memory allocated by the */
385/* driver should be returned since it may be unloaded from memory. */
386/******************************************************************************/
387#ifdef MODULE
388void
389cleanup_module(void)
390{
391 int err;
392 int i;
393
394#ifdef IP2DEBUG_INIT
395 printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion );
396#endif
397 /* Stop poll timer if we had one. */
398 if ( TimerOn ) {
399 del_timer ( &PollTimer );
400 TimerOn = 0;
401 }
402
403 /* Reset the boards we have. */
404 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
405 if ( i2BoardPtrTable[i] ) {
406 iiReset( i2BoardPtrTable[i] );
407 }
408 }
409
410 /* The following is done at most once, if any boards were installed. */
411 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
412 if ( i2BoardPtrTable[i] ) {
413 iiResetDelay( i2BoardPtrTable[i] );
414 /* free io addresses and Tibet */
415 release_region( ip2config.addr[i], 8 );
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]416 class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]417 devfs_remove("ip2/ipl%d", i);
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]418 class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]419 devfs_remove("ip2/stat%d", i);
420 }
421 /* Disable and remove interrupt handler. */
422 if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) {
423 free_irq ( ip2config.irq[i], (void *)&pcName);
424 clear_requested_irq( ip2config.irq[i]);
425 }
426 }
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]427 class_destroy(ip2_class);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]428 devfs_remove("ip2");
429 if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) {
430 printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err);
431 }
432 put_tty_driver(ip2_tty_driver);
433 if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) {
434 printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err);
435 }
436 remove_proc_entry("ip2mem", &proc_root);
437
438 // free memory
439 for (i = 0; i < IP2_MAX_BOARDS; i++) {
440 void *pB;
441#ifdef CONFIG_PCI
442 if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
443 pci_disable_device(ip2config.pci_dev[i]);
444 ip2config.pci_dev[i] = NULL;
445 }
446#endif
447 if ((pB = i2BoardPtrTable[i]) != 0 ) {
448 kfree ( pB );
449 i2BoardPtrTable[i] = NULL;
450 }
451 if ((DevTableMem[i]) != NULL ) {
452 kfree ( DevTableMem[i] );
453 DevTableMem[i] = NULL;
454 }
455 }
456
457 /* Cleanup the iiEllis subsystem. */
458 iiEllisCleanup();
459#ifdef IP2DEBUG_INIT
460 printk (KERN_DEBUG "IP2 Unloaded\n" );
461#endif
462}
463#endif /* MODULE */
464
465static struct tty_operations ip2_ops = {
466 .open = ip2_open,
467 .close = ip2_close,
468 .write = ip2_write,
469 .put_char = ip2_putchar,
470 .flush_chars = ip2_flush_chars,
471 .write_room = ip2_write_room,
472 .chars_in_buffer = ip2_chars_in_buf,
473 .flush_buffer = ip2_flush_buffer,
474 .ioctl = ip2_ioctl,
475 .throttle = ip2_throttle,
476 .unthrottle = ip2_unthrottle,
477 .set_termios = ip2_set_termios,
478 .set_ldisc = ip2_set_line_discipline,
479 .stop = ip2_stop,
480 .start = ip2_start,
481 .hangup = ip2_hangup,
482 .read_proc = ip2_read_proc,
483 .tiocmget = ip2_tiocmget,
484 .tiocmset = ip2_tiocmset,
485};
486
487/******************************************************************************/
488/* Function: ip2_loadmain() */
489/* Parameters: irq, io from command line of insmod et. al. */
490/* pointer to fip firmware and firmware size for boards */
491/* Returns: Success (0) */
492/* */
493/* Description: */
494/* This was the required entry point for all drivers (now in ip2.c) */
495/* It performs all */
496/* initialisation of the devices and driver structures, and registers itself */
497/* with the relevant kernel modules. */
498/******************************************************************************/
499/* SA_INTERRUPT- if set blocks all interrupts else only this line */
500/* SA_SHIRQ - for shared irq PCI or maybe EISA only */
501/* SA_RANDOM - can be source for cert. random number generators */
502#define IP2_SA_FLAGS 0
503
504int
505ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize)
506{
507 int i, j, box;
508 int err = 0;
509 int status = 0;
510 static int loaded;
511 i2eBordStrPtr pB = NULL;
512 int rc = -1;
513
514 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
515
516 /* process command line arguments to modprobe or
517 insmod i.e. iop & irqp */
518 /* irqp and iop should ALWAYS be specified now... But we check
519 them individually just to be sure, anyways... */
520 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
521 if (iop) {
522 ip2config.addr[i] = iop[i];
523 if (irqp) {
524 if( irqp[i] >= 0 ) {
525 ip2config.irq[i] = irqp[i];
526 } else {
527 ip2config.irq[i] = 0;
528 }
529 // This is a little bit of a hack. If poll_only=1 on command
530 // line back in ip2.c OR all IRQs on all specified boards are
531 // explicitly set to 0, then drop to poll only mode and override
532 // PCI or EISA interrupts. This superceeds the old hack of
533 // triggering if all interrupts were zero (like da default).
534 // Still a hack but less prone to random acts of terrorism.
535 //
536 // What we really should do, now that the IRQ default is set
537 // to -1, is to use 0 as a hard coded, do not probe.
538 //
539 // /\/\|=mhw=|\/\/
540 poll_only |= irqp[i];
541 }
542 }
543 }
544 poll_only = !poll_only;
545
546 Fip_firmware = firmware;
547 Fip_firmware_size = firmsize;
548
549 /* Announce our presence */
550 printk( KERN_INFO "%s version %s\n", pcName, pcVersion );
551
552 // ip2 can be unloaded and reloaded for no good reason
553 // we can't let that happen here or bad things happen
554 // second load hoses board but not system - fixme later
555 if (loaded) {
556 printk( KERN_INFO "Still loaded\n" );
557 return 0;
558 }
559 loaded++;
560
561 ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
562 if (!ip2_tty_driver)
563 return -ENOMEM;
564
565 /* Initialise the iiEllis subsystem. */
566 iiEllisInit();
567
568 /* Initialize arrays. */
569 memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable );
570 memset( DevTable, 0, sizeof DevTable );
571
572 /* Initialise all the boards we can find (up to the maximum). */
573 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
574 switch ( ip2config.addr[i] ) {
575 case 0: /* skip this slot even if card is present */
576 break;
577 default: /* ISA */
578 /* ISA address must be specified */
579 if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) {
580 printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n",
581 i, ip2config.addr[i] );
582 ip2config.addr[i] = 0;
583 } else {
584 ip2config.type[i] = ISA;
585
586 /* Check for valid irq argument, set for polling if invalid */
587 if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) {
588 printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]);
589 ip2config.irq[i] = 0;// 0 is polling and is valid in that sense
590 }
591 }
592 break;
593 case PCI:
594#ifdef CONFIG_PCI
595 {
596 struct pci_dev *pci_dev_i = NULL;
597 pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE,
598 PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
599 if (pci_dev_i != NULL) {
600 unsigned int addr;
601
602 if (pci_enable_device(pci_dev_i)) {
603 printk( KERN_ERR "IP2: can't enable PCI device at %s\n",
604 pci_name(pci_dev_i));
605 break;
606 }
607 ip2config.type[i] = PCI;
608 ip2config.pci_dev[i] = pci_dev_i;
609 status =
610 pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr);
611 if ( addr & 1 ) {
612 ip2config.addr[i]=(USHORT)(addr&0xfffe);
613 } else {
614 printk( KERN_ERR "IP2: PCI I/O address error\n");
615 }
616
617// If the PCI BIOS assigned it, lets try and use it. If we
618// can't acquire it or it screws up, deal with it then.
619
620// if (!is_valid_irq(pci_irq)) {
621// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq);
622// pci_irq = 0;
623// }
624 ip2config.irq[i] = pci_dev_i->irq;
625 } else { // ann error
626 ip2config.addr[i] = 0;
627 if (status == PCIBIOS_DEVICE_NOT_FOUND) {
628 printk( KERN_ERR "IP2: PCI board %d not found\n", i );
629 } else {
630 printk( KERN_ERR "IP2: PCI error 0x%x \n", status );
631 }
632 }
633 }
634#else
635 printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");
636 printk( KERN_ERR "IP2: configured in this kernel.\n");
637 printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n");
638#endif /* CONFIG_PCI */
639 break;
640 case EISA:
641 if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) {
642 /* Eisa_irq set as side effect, boo */
643 ip2config.type[i] = EISA;
644 }
645 ip2config.irq[i] = Eisa_irq;
646 break;
647 } /* switch */
648 } /* for */
649 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
650 if ( ip2config.addr[i] ) {
651 pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL);
652 if ( pB != NULL ) {
653 i2BoardPtrTable[i] = pB;
654 memset( pB, 0, sizeof(i2eBordStr) );
655 iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer );
656 iiReset( pB );
657 } else {
658 printk(KERN_ERR "IP2: board memory allocation error\n");
659 }
660 }
661 }
662 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
663 if ( ( pB = i2BoardPtrTable[i] ) != NULL ) {
664 iiResetDelay( pB );
665 break;
666 }
667 }
668 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
669 if ( i2BoardPtrTable[i] != NULL ) {
670 ip2_init_board( i );
671 }
672 }
673
674 ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 );
675
676 ip2_tty_driver->owner = THIS_MODULE;
677 ip2_tty_driver->name = "ttyF";
678 ip2_tty_driver->devfs_name = "tts/F";
679 ip2_tty_driver->driver_name = pcDriver_name;
680 ip2_tty_driver->major = IP2_TTY_MAJOR;
681 ip2_tty_driver->minor_start = 0;
682 ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
683 ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
684 ip2_tty_driver->init_termios = tty_std_termios;
685 ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
686 ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
687 tty_set_operations(ip2_tty_driver, &ip2_ops);
688
689 ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 );
690
691 /* Register the tty devices. */
692 if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) {
693 printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err);
694 put_tty_driver(ip2_tty_driver);
695 return -EINVAL;
696 } else
697 /* Register the IPL driver. */
698 if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) {
699 printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err );
700 } else {
701 /* create the sysfs class */
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]702 ip2_class = class_create(THIS_MODULE, "ip2");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]703 if (IS_ERR(ip2_class)) {
704 err = PTR_ERR(ip2_class);
705 goto out_chrdev;
706 }
707 }
708 /* Register the read_procmem thing */
709 if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) {
710 printk(KERN_ERR "IP2: failed to register read_procmem\n");
711 } else {
712
713 ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 );
714 /* Register the interrupt handler or poll handler, depending upon the
715 * specified interrupt.
716 */
717
718 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
719 if ( 0 == ip2config.addr[i] ) {
720 continue;
721 }
722
723 if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
Greg Kroah-Hartman53f46542005-10-27 22:25:43 -0700[diff] [blame]724 class_device_create(ip2_class, NULL,
725 MKDEV(IP2_IPL_MAJOR, 4 * i),
726 NULL, "ipl%d", i);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]727 err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i),
728 S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
729 "ip2/ipl%d", i);
730 if (err) {
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]731 class_device_destroy(ip2_class,
732 MKDEV(IP2_IPL_MAJOR, 4 * i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]733 goto out_class;
734 }
735
Greg Kroah-Hartman53f46542005-10-27 22:25:43 -0700[diff] [blame]736 class_device_create(ip2_class, NULL,
737 MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
738 NULL, "stat%d", i);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]739 err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
740 S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
741 "ip2/stat%d", i);
742 if (err) {
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]743 class_device_destroy(ip2_class,
744 MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]745 goto out_class;
746 }
747
748 for ( box = 0; box < ABS_MAX_BOXES; ++box )
749 {
750 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
751 {
752 if ( pB->i2eChannelMap[box] & (1 << j) )
753 {
754 tty_register_device(ip2_tty_driver,
755 j + ABS_BIGGEST_BOX *
756 (box+i*ABS_MAX_BOXES), NULL);
757 }
758 }
759 }
760 }
761
762 if (poll_only) {
763// Poll only forces driver to only use polling and
764// to ignore the probed PCI or EISA interrupts.
765 ip2config.irq[i] = CIR_POLL;
766 }
767 if ( ip2config.irq[i] == CIR_POLL ) {
768retry:
769 if (!TimerOn) {
770 PollTimer.expires = POLL_TIMEOUT;
771 add_timer ( &PollTimer );
772 TimerOn = 1;
773 printk( KERN_INFO "IP2: polling\n");
774 }
775 } else {
776 if (have_requested_irq(ip2config.irq[i]))
777 continue;
778 rc = request_irq( ip2config.irq[i], ip2_interrupt,
779 IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0),
780 pcName, (void *)&pcName);
781 if (rc) {
782 printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
783 ip2config.irq[i] = CIR_POLL;
784 printk( KERN_INFO "IP2: Polling %ld/sec.\n",
785 (POLL_TIMEOUT - jiffies));
786 goto retry;
787 }
788 mark_requested_irq(ip2config.irq[i]);
789 /* Initialise the interrupt handler bottom half (aka slih). */
790 }
791 }
792 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
793 if ( i2BoardPtrTable[i] ) {
794 set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */
795 }
796 }
797 }
798 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 );
799 goto out;
800
801out_class:
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]802 class_destroy(ip2_class);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]803out_chrdev:
804 unregister_chrdev(IP2_IPL_MAJOR, "ip2");
805out:
806 return err;
807}
808
809EXPORT_SYMBOL(ip2_loadmain);
810
811/******************************************************************************/
812/* Function: ip2_init_board() */
813/* Parameters: Index of board in configuration structure */
814/* Returns: Success (0) */
815/* */
816/* Description: */
817/* This function initializes the specified board. The loadware is copied to */
818/* the board, the channel structures are initialized, and the board details */
819/* are reported on the console. */
820/******************************************************************************/
821static void __init
822ip2_init_board( int boardnum )
823{
824 int i;
825 int nports = 0, nboxes = 0;
826 i2ChanStrPtr pCh;
827 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
828
829 if ( !iiInitialize ( pB ) ) {
830 printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
831 pB->i2eBase, pB->i2eError );
832 goto err_initialize;
833 }
834 printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
835 ip2config.addr[boardnum], ip2config.irq[boardnum] );
836
837 if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
838 printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
839 goto err_initialize;
840 }
841
842 if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size )
843 != II_DOWN_GOOD ) {
844 printk ( KERN_ERR "IP2: failed to download loadware\n" );
845 goto err_release_region;
846 } else {
847 printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
848 pB->i2ePom.e.porVersion,
849 pB->i2ePom.e.porRevision,
850 pB->i2ePom.e.porSubRev, pB->i2eLVersion,
851 pB->i2eLRevision, pB->i2eLSub );
852 }
853
854 switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
855
856 default:
857 printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
858 pB->i2ePom.e.porID );
859 nports = 0;
860 goto err_release_region;
861 break;
862
863 case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
864 printk ( KERN_INFO "IP2: ISA-4\n" );
865 nports = 4;
866 break;
867
868 case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
869 printk ( KERN_INFO "IP2: ISA-8 std\n" );
870 nports = 8;
871 break;
872
873 case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
874 printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
875 nports = 8;
876 break;
877
878 case POR_ID_FIIEX: /* IntelliPort IIEX */
879 {
880 int portnum = IP2_PORTS_PER_BOARD * boardnum;
881 int box;
882
883 for( box = 0; box < ABS_MAX_BOXES; ++box ) {
884 if ( pB->i2eChannelMap[box] != 0 ) {
885 ++nboxes;
886 }
887 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
888 if ( pB->i2eChannelMap[box] & 1<< i ) {
889 ++nports;
890 }
891 }
892 }
893 DevTableMem[boardnum] = pCh =
894 kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
895 if ( !pCh ) {
896 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
897 goto err_release_region;
898 }
899 if ( !i2InitChannels( pB, nports, pCh ) ) {
900 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
901 kfree ( pCh );
902 goto err_release_region;
903 }
904 pB->i2eChannelPtr = &DevTable[portnum];
905 pB->i2eChannelCnt = ABS_MOST_PORTS;
906
907 for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
908 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
909 if ( pB->i2eChannelMap[box] & (1 << i) ) {
910 DevTable[portnum + i] = pCh;
911 pCh->port_index = portnum + i;
912 pCh++;
913 }
914 }
915 }
916 printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
917 nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
918 }
919 goto ex_exit;
920 }
921 DevTableMem[boardnum] = pCh =
922 kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
923 if ( !pCh ) {
924 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
925 goto err_release_region;
926 }
927 pB->i2eChannelPtr = pCh;
928 pB->i2eChannelCnt = nports;
929 if ( !i2InitChannels( pB, nports, pCh ) ) {
930 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
931 kfree ( pCh );
932 goto err_release_region;
933 }
934 pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
935
936 for( i = 0; i < pB->i2eChannelCnt; ++i ) {
937 DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
938 pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
939 pCh++;
940 }
941ex_exit:
942 INIT_WORK(&pB->tqueue_interrupt, (void(*)(void*)) ip2_interrupt_bh, pB);
943 return;
944
945err_release_region:
946 release_region(ip2config.addr[boardnum], 8);
947err_initialize:
948 kfree ( pB );
949 i2BoardPtrTable[boardnum] = NULL;
950 return;
951}
952
953/******************************************************************************/
954/* Function: find_eisa_board ( int start_slot ) */
955/* Parameters: First slot to check */
956/* Returns: Address of EISA IntelliPort II controller */
957/* */
958/* Description: */
959/* This function searches for an EISA IntelliPort controller, starting */
960/* from the specified slot number. If the motherboard is not identified as an */
961/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
962/* it returns the base address of the controller. */
963/******************************************************************************/
964static unsigned short __init
965find_eisa_board( int start_slot )
966{
967 int i, j;
968 unsigned int idm = 0;
969 unsigned int idp = 0;
970 unsigned int base = 0;
971 unsigned int value;
972 int setup_address;
973 int setup_irq;
974 int ismine = 0;
975
976 /*
977 * First a check for an EISA motherboard, which we do by comparing the
978 * EISA ID registers for the system board and the first couple of slots.
979 * No slot ID should match the system board ID, but on an ISA or PCI
980 * machine the odds are that an empty bus will return similar values for
981 * each slot.
982 */
983 i = 0x0c80;
984 value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
985 for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
986 j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
987 if ( value == j )
988 return 0;
989 }
990
991 /*
992 * OK, so we are inclined to believe that this is an EISA machine. Find
993 * an IntelliPort controller.
994 */
995 for( i = start_slot; i < 16; i++ ) {
996 base = i << 12;
997 idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
998 idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
999 ismine = 0;
1000 if ( idm == 0x0e8e ) {
1001 if ( idp == 0x0281 || idp == 0x0218 ) {
1002 ismine = 1;
1003 } else if ( idp == 0x0282 || idp == 0x0283 ) {
1004 ismine = 3; /* Can do edge-trigger */
1005 }
1006 if ( ismine ) {
1007 Eisa_slot = i;
1008 break;
1009 }
1010 }
1011 }
1012 if ( !ismine )
1013 return 0;
1014
1015 /* It's some sort of EISA card, but at what address is it configured? */
1016
1017 setup_address = base + 0xc88;
1018 value = inb(base + 0xc86);
1019 setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
1020
1021 if ( (ismine & 2) && !(value & 0x10) ) {
1022 ismine = 1; /* Could be edging, but not */
1023 }
1024
1025 if ( Eisa_irq == 0 ) {
1026 Eisa_irq = setup_irq;
1027 } else if ( Eisa_irq != setup_irq ) {
1028 printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
1029 }
1030
1031#ifdef IP2DEBUG_INIT
1032printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
1033 base >> 12, idm, idp, setup_address);
1034 if ( Eisa_irq ) {
1035 printk(KERN_DEBUG ", Interrupt %d %s\n",
1036 setup_irq, (ismine & 2) ? "(edge)" : "(level)");
1037 } else {
1038 printk(KERN_DEBUG ", (polled)\n");
1039 }
1040#endif
1041 return setup_address;
1042}
1043
1044/******************************************************************************/
1045/* Function: set_irq() */
1046/* Parameters: index to board in board table */
1047/* IRQ to use */
1048/* Returns: Success (0) */
1049/* */
1050/* Description: */
1051/******************************************************************************/
1052static void
1053set_irq( int boardnum, int boardIrq )
1054{
1055 unsigned char tempCommand[16];
1056 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
1057 unsigned long flags;
1058
1059 /*
1060 * Notify the boards they may generate interrupts. This is done by
1061 * sending an in-line command to channel 0 on each board. This is why
1062 * the channels have to be defined already. For each board, if the
1063 * interrupt has never been defined, we must do so NOW, directly, since
1064 * board will not send flow control or even give an interrupt until this
1065 * is done. If polling we must send 0 as the interrupt parameter.
1066 */
1067
1068 // We will get an interrupt here at the end of this function
1069
1070 iiDisableMailIrq(pB);
1071
1072 /* We build up the entire packet header. */
1073 CHANNEL_OF(tempCommand) = 0;
1074 PTYPE_OF(tempCommand) = PTYPE_INLINE;
1075 CMD_COUNT_OF(tempCommand) = 2;
1076 (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
1077 (CMD_OF(tempCommand))[1] = boardIrq;
1078 /*
1079 * Write to FIFO; don't bother to adjust fifo capacity for this, since
1080 * board will respond almost immediately after SendMail hit.
1081 */
1082 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1083 iiWriteBuf(pB, tempCommand, 4);
1084 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1085 pB->i2eUsingIrq = boardIrq;
1086 pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
1087
1088 /* Need to update number of boards before you enable mailbox int */
1089 ++i2nBoards;
1090
1091 CHANNEL_OF(tempCommand) = 0;
1092 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1093 CMD_COUNT_OF(tempCommand) = 6;
1094 (CMD_OF(tempCommand))[0] = 88; // SILO
1095 (CMD_OF(tempCommand))[1] = 64; // chars
1096 (CMD_OF(tempCommand))[2] = 32; // ms
1097
1098 (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK
1099 (CMD_OF(tempCommand))[4] = 64; // chars
1100
1101 (CMD_OF(tempCommand))[5] = 87; // HW_TEST
1102 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1103 iiWriteBuf(pB, tempCommand, 8);
1104 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1105
1106 CHANNEL_OF(tempCommand) = 0;
1107 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1108 CMD_COUNT_OF(tempCommand) = 1;
1109 (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */
1110 iiWriteBuf(pB, tempCommand, 3);
1111
1112#ifdef XXX
1113 // enable heartbeat for test porpoises
1114 CHANNEL_OF(tempCommand) = 0;
1115 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1116 CMD_COUNT_OF(tempCommand) = 2;
1117 (CMD_OF(tempCommand))[0] = 44; /* get ping */
1118 (CMD_OF(tempCommand))[1] = 200; /* 200 ms */
1119 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1120 iiWriteBuf(pB, tempCommand, 4);
1121 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1122#endif
1123
1124 iiEnableMailIrq(pB);
1125 iiSendPendingMail(pB);
1126}
1127
1128/******************************************************************************/
1129/* Interrupt Handler Section */
1130/******************************************************************************/
1131
1132static inline void
1133service_all_boards(void)
1134{
1135 int i;
1136 i2eBordStrPtr pB;
1137
1138 /* Service every board on the list */
1139 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
1140 pB = i2BoardPtrTable[i];
1141 if ( pB ) {
1142 i2ServiceBoard( pB );
1143 }
1144 }
1145}
1146
1147
1148/******************************************************************************/
1149/* Function: ip2_interrupt_bh(pB) */
1150/* Parameters: pB - pointer to the board structure */
1151/* Returns: Nothing */
1152/* */
1153/* Description: */
1154/* Service the board in a bottom half interrupt handler and then */
1155/* reenable the board's interrupts if it has an IRQ number */
1156/* */
1157/******************************************************************************/
1158static void
1159ip2_interrupt_bh(i2eBordStrPtr pB)
1160{
1161// pB better well be set or we have a problem! We can only get
1162// here from the IMMEDIATE queue. Here, we process the boards.
1163// Checking pB doesn't cost much and it saves us from the sanity checkers.
1164
1165 bh_counter++;
1166
1167 if ( pB ) {
1168 i2ServiceBoard( pB );
1169 if( pB->i2eUsingIrq ) {
1170// Re-enable his interrupts
1171 iiEnableMailIrq(pB);
1172 }
1173 }
1174}
1175
1176
1177/******************************************************************************/
1178/* Function: ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) */
1179/* Parameters: irq - interrupt number */
1180/* pointer to optional device ID structure */
1181/* pointer to register structure */
1182/* Returns: Nothing */
1183/* */
1184/* Description: */
1185/* */
1186/* Our task here is simply to identify each board which needs servicing. */
1187/* If we are queuing then, queue it to be serviced, and disable its irq */
1188/* mask otherwise process the board directly. */
1189/* */
1190/* We could queue by IRQ but that just complicates things on both ends */
1191/* with very little gain in performance (how many instructions does */
1192/* it take to iterate on the immediate queue). */
1193/* */
1194/* */
1195/******************************************************************************/
1196static irqreturn_t
1197ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs)
1198{
1199 int i;
1200 i2eBordStrPtr pB;
1201 int handled = 0;
1202
1203 ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq );
1204
1205 /* Service just the boards on the list using this irq */
1206 for( i = 0; i < i2nBoards; ++i ) {
1207 pB = i2BoardPtrTable[i];
1208
1209// Only process those boards which match our IRQ.
1210// IRQ = 0 for polled boards, we won't poll "IRQ" boards
1211
1212 if ( pB && (pB->i2eUsingIrq == irq) ) {
1213 handled = 1;
1214#ifdef USE_IQI
1215
1216 if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
1217// Disable his interrupt (will be enabled when serviced)
1218// This is mostly to protect from reentrancy.
1219 iiDisableMailIrq(pB);
1220
1221// Park the board on the immediate queue for processing.
1222 schedule_work(&pB->tqueue_interrupt);
1223
1224// Make sure the immediate queue is flagged to fire.
1225 }
1226#else
1227// We are using immediate servicing here. This sucks and can
1228// cause all sorts of havoc with ppp and others. The failsafe
1229// check on iiSendPendingMail could also throw a hairball.
1230 i2ServiceBoard( pB );
1231#endif /* USE_IQI */
1232 }
1233 }
1234
1235 ++irq_counter;
1236
1237 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1238 return IRQ_RETVAL(handled);
1239}
1240
1241/******************************************************************************/
1242/* Function: ip2_poll(unsigned long arg) */
1243/* Parameters: ? */
1244/* Returns: Nothing */
1245/* */
1246/* Description: */
1247/* This function calls the library routine i2ServiceBoard for each board in */
1248/* the board table. This is used instead of the interrupt routine when polled */
1249/* mode is specified. */
1250/******************************************************************************/
1251static void
1252ip2_poll(unsigned long arg)
1253{
1254 ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
1255
1256 TimerOn = 0; // it's the truth but not checked in service
1257
1258 // Just polled boards, IRQ = 0 will hit all non-interrupt boards.
1259 // It will NOT poll boards handled by hard interrupts.
1260 // The issue of queued BH interrups is handled in ip2_interrupt().
1261 ip2_interrupt(0, NULL, NULL);
1262
1263 PollTimer.expires = POLL_TIMEOUT;
1264 add_timer( &PollTimer );
1265 TimerOn = 1;
1266
1267 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1268}
1269
1270static void do_input(void *p)
1271{
1272 i2ChanStrPtr pCh = p;
1273 unsigned long flags;
1274
1275 ip2trace(CHANN, ITRC_INPUT, 21, 0 );
1276
1277 // Data input
1278 if ( pCh->pTTY != NULL ) {
1279 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1280 if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
1281 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1282 i2Input( pCh );
1283 } else
1284 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1285 } else {
1286 ip2trace(CHANN, ITRC_INPUT, 22, 0 );
1287
1288 i2InputFlush( pCh );
1289 }
1290}
1291
1292// code duplicated from n_tty (ldisc)
1293static inline void isig(int sig, struct tty_struct *tty, int flush)
1294{
1295 if (tty->pgrp > 0)
1296 kill_pg(tty->pgrp, sig, 1);
1297 if (flush || !L_NOFLSH(tty)) {
1298 if ( tty->ldisc.flush_buffer )
1299 tty->ldisc.flush_buffer(tty);
1300 i2InputFlush( tty->driver_data );
1301 }
1302}
1303
1304static void do_status(void *p)
1305{
1306 i2ChanStrPtr pCh = p;
1307 int status;
1308
1309 status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
1310
1311 ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
1312
1313 if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
1314 if ( (status & I2_BRK) ) {
1315 // code duplicated from n_tty (ldisc)
1316 if (I_IGNBRK(pCh->pTTY))
1317 goto skip_this;
1318 if (I_BRKINT(pCh->pTTY)) {
1319 isig(SIGINT, pCh->pTTY, 1);
1320 goto skip_this;
1321 }
1322 wake_up_interruptible(&pCh->pTTY->read_wait);
1323 }
1324#ifdef NEVER_HAPPENS_AS_SETUP_XXX
1325 // and can't work because we don't know the_char
1326 // as the_char is reported on a separate path
1327 // The intelligent board does this stuff as setup
1328 {
1329 char brkf = TTY_NORMAL;
1330 unsigned char brkc = '\0';
1331 unsigned char tmp;
1332 if ( (status & I2_BRK) ) {
1333 brkf = TTY_BREAK;
1334 brkc = '\0';
1335 }
1336 else if (status & I2_PAR) {
1337 brkf = TTY_PARITY;
1338 brkc = the_char;
1339 } else if (status & I2_FRA) {
1340 brkf = TTY_FRAME;
1341 brkc = the_char;
1342 } else if (status & I2_OVR) {
1343 brkf = TTY_OVERRUN;
1344 brkc = the_char;
1345 }
1346 tmp = pCh->pTTY->real_raw;
1347 pCh->pTTY->real_raw = 0;
1348 pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
1349 pCh->pTTY->real_raw = tmp;
1350 }
1351#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
1352 }
1353skip_this:
1354
1355 if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
1356 wake_up_interruptible(&pCh->delta_msr_wait);
1357
1358 if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
1359 if ( status & I2_DCD ) {
1360 if ( pCh->wopen ) {
1361 wake_up_interruptible ( &pCh->open_wait );
1362 }
1363 } else {
1364 if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
1365 tty_hangup( pCh->pTTY );
1366 }
1367 }
1368 }
1369 }
1370
1371 ip2trace (CHANN, ITRC_STATUS, 26, 0 );
1372}
1373
1374/******************************************************************************/
1375/* Device Open/Close/Ioctl Entry Point Section */
1376/******************************************************************************/
1377
1378/******************************************************************************/
1379/* Function: open_sanity_check() */
1380/* Parameters: Pointer to tty structure */
1381/* Pointer to file structure */
1382/* Returns: Success or failure */
1383/* */
1384/* Description: */
1385/* Verifies the structure magic numbers and cross links. */
1386/******************************************************************************/
1387#ifdef IP2DEBUG_OPEN
1388static void
1389open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
1390{
1391 if ( pBrd->i2eValid != I2E_MAGIC ) {
1392 printk(KERN_ERR "IP2: invalid board structure\n" );
1393 } else if ( pBrd != pCh->pMyBord ) {
1394 printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
1395 pCh->pMyBord );
1396 } else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
1397 printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
1398 } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
1399 } else {
1400 printk(KERN_INFO "IP2: all pointers check out!\n" );
1401 }
1402}
1403#endif
1404
1405
1406/******************************************************************************/
1407/* Function: ip2_open() */
1408/* Parameters: Pointer to tty structure */
1409/* Pointer to file structure */
1410/* Returns: Success or failure */
1411/* */
1412/* Description: (MANDATORY) */
1413/* A successful device open has to run a gauntlet of checks before it */
1414/* completes. After some sanity checking and pointer setup, the function */
1415/* blocks until all conditions are satisfied. It then initialises the port to */
1416/* the default characteristics and returns. */
1417/******************************************************************************/
1418static int
1419ip2_open( PTTY tty, struct file *pFile )
1420{
1421 wait_queue_t wait;
1422 int rc = 0;
1423 int do_clocal = 0;
1424 i2ChanStrPtr pCh = DevTable[tty->index];
1425
1426 ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
1427
1428 if ( pCh == NULL ) {
1429 return -ENODEV;
1430 }
1431 /* Setup pointer links in device and tty structures */
1432 pCh->pTTY = tty;
1433 tty->driver_data = pCh;
1434
1435#ifdef IP2DEBUG_OPEN
1436 printk(KERN_DEBUG \
1437 "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
1438 tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
1439 open_sanity_check ( pCh, pCh->pMyBord );
1440#endif
1441
1442 i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
1443 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1444 serviceOutgoingFifo( pCh->pMyBord );
1445
1446 /* Block here until the port is ready (per serial and istallion) */
1447 /*
1448 * 1. If the port is in the middle of closing wait for the completion
1449 * and then return the appropriate error.
1450 */
1451 init_waitqueue_entry(&wait, current);
1452 add_wait_queue(&pCh->close_wait, &wait);
1453 set_current_state( TASK_INTERRUPTIBLE );
1454
1455 if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
1456 if ( pCh->flags & ASYNC_CLOSING ) {
1457 schedule();
1458 }
1459 if ( tty_hung_up_p(pFile) ) {
1460 set_current_state( TASK_RUNNING );
1461 remove_wait_queue(&pCh->close_wait, &wait);
1462 return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
1463 }
1464 }
1465 set_current_state( TASK_RUNNING );
1466 remove_wait_queue(&pCh->close_wait, &wait);
1467
1468 /*
1469 * 3. Handle a non-blocking open of a normal port.
1470 */
1471 if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
1472 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1473 goto noblock;
1474 }
1475 /*
1476 * 4. Now loop waiting for the port to be free and carrier present
1477 * (if required).
1478 */
1479 if ( tty->termios->c_cflag & CLOCAL )
1480 do_clocal = 1;
1481
1482#ifdef IP2DEBUG_OPEN
1483 printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
1484#endif
1485
1486 ++pCh->wopen;
1487
1488 init_waitqueue_entry(&wait, current);
1489 add_wait_queue(&pCh->open_wait, &wait);
1490
1491 for(;;) {
1492 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
1493 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1494 set_current_state( TASK_INTERRUPTIBLE );
1495 serviceOutgoingFifo( pCh->pMyBord );
1496 if ( tty_hung_up_p(pFile) ) {
1497 set_current_state( TASK_RUNNING );
1498 remove_wait_queue(&pCh->open_wait, &wait);
1499 return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
1500 }
1501 if (!(pCh->flags & ASYNC_CLOSING) &&
1502 (do_clocal || (pCh->dataSetIn & I2_DCD) )) {
1503 rc = 0;
1504 break;
1505 }
1506
1507#ifdef IP2DEBUG_OPEN
1508 printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
1509 (pCh->flags & ASYNC_CLOSING)?"True":"False");
1510 printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
1511#endif
1512 ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
1513 (pCh->flags & ASYNC_CLOSING) );
1514 /* check for signal */
1515 if (signal_pending(current)) {
1516 rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
1517 break;
1518 }
1519 schedule();
1520 }
1521 set_current_state( TASK_RUNNING );
1522 remove_wait_queue(&pCh->open_wait, &wait);
1523
1524 --pCh->wopen; //why count?
1525
1526 ip2trace (CHANN, ITRC_OPEN, 4, 0 );
1527
1528 if (rc != 0 ) {
1529 return rc;
1530 }
1531 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1532
1533noblock:
1534
1535 /* first open - Assign termios structure to port */
1536 if ( tty->count == 1 ) {
1537 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1538 /* Now we must send the termios settings to the loadware */
1539 set_params( pCh, NULL );
1540 }
1541
1542 /*
1543 * Now set any i2lib options. These may go away if the i2lib code ends
1544 * up rolled into the mainline.
1545 */
1546 pCh->channelOptions |= CO_NBLOCK_WRITE;
1547
1548#ifdef IP2DEBUG_OPEN
1549 printk (KERN_DEBUG "IP2: open completed\n" );
1550#endif
1551 serviceOutgoingFifo( pCh->pMyBord );
1552
1553 ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
1554
1555 return 0;
1556}
1557
1558/******************************************************************************/
1559/* Function: ip2_close() */
1560/* Parameters: Pointer to tty structure */
1561/* Pointer to file structure */
1562/* Returns: Nothing */
1563/* */
1564/* Description: */
1565/* */
1566/* */
1567/******************************************************************************/
1568static void
1569ip2_close( PTTY tty, struct file *pFile )
1570{
1571 i2ChanStrPtr pCh = tty->driver_data;
1572
1573 if ( !pCh ) {
1574 return;
1575 }
1576
1577 ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
1578
1579#ifdef IP2DEBUG_OPEN
1580 printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
1581#endif
1582
1583 if ( tty_hung_up_p ( pFile ) ) {
1584
1585 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
1586
1587 return;
1588 }
1589 if ( tty->count > 1 ) { /* not the last close */
1590
1591 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
1592
1593 return;
1594 }
1595 pCh->flags |= ASYNC_CLOSING; // last close actually
1596
1597 tty->closing = 1;
1598
1599 if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
1600 /*
1601 * Before we drop DTR, make sure the transmitter has completely drained.
1602 * This uses an timeout, after which the close
1603 * completes.
1604 */
1605 ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
1606 }
1607 /*
1608 * At this point we stop accepting input. Here we flush the channel
1609 * input buffer which will allow the board to send up more data. Any
1610 * additional input is tossed at interrupt/poll time.
1611 */
1612 i2InputFlush( pCh );
1613
1614 /* disable DSS reporting */
1615 i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
1616 CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1617 if ( !tty || (tty->termios->c_cflag & HUPCL) ) {
1618 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
1619 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1620 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1621 }
1622
1623 serviceOutgoingFifo ( pCh->pMyBord );
1624
1625 if ( tty->driver->flush_buffer )
1626 tty->driver->flush_buffer(tty);
1627 if ( tty->ldisc.flush_buffer )
1628 tty->ldisc.flush_buffer(tty);
1629 tty->closing = 0;
1630
1631 pCh->pTTY = NULL;
1632
1633 if (pCh->wopen) {
1634 if (pCh->ClosingDelay) {
1635 msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
1636 }
1637 wake_up_interruptible(&pCh->open_wait);
1638 }
1639
1640 pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1641 wake_up_interruptible(&pCh->close_wait);
1642
1643#ifdef IP2DEBUG_OPEN
1644 DBG_CNT("ip2_close: after wakeups--");
1645#endif
1646
1647
1648 ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
1649
1650 return;
1651}
1652
1653/******************************************************************************/
1654/* Function: ip2_hangup() */
1655/* Parameters: Pointer to tty structure */
1656/* Returns: Nothing */
1657/* */
1658/* Description: */
1659/* */
1660/* */
1661/******************************************************************************/
1662static void
1663ip2_hangup ( PTTY tty )
1664{
1665 i2ChanStrPtr pCh = tty->driver_data;
1666
1667 if( !pCh ) {
1668 return;
1669 }
1670
1671 ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
1672
1673 ip2_flush_buffer(tty);
1674
1675 /* disable DSS reporting */
1676
1677 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
1678 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1679 if ( (tty->termios->c_cflag & HUPCL) ) {
1680 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
1681 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1682 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1683 }
1684 i2QueueCommands(PTYPE_INLINE, pCh, 1, 3,
1685 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1686 serviceOutgoingFifo ( pCh->pMyBord );
1687
1688 wake_up_interruptible ( &pCh->delta_msr_wait );
1689
1690 pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
1691 pCh->pTTY = NULL;
1692 wake_up_interruptible ( &pCh->open_wait );
1693
1694 ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
1695}
1696
1697/******************************************************************************/
1698/******************************************************************************/
1699/* Device Output Section */
1700/******************************************************************************/
1701/******************************************************************************/
1702
1703/******************************************************************************/
1704/* Function: ip2_write() */
1705/* Parameters: Pointer to tty structure */
1706/* Flag denoting data is in user (1) or kernel (0) space */
1707/* Pointer to data */
1708/* Number of bytes to write */
1709/* Returns: Number of bytes actually written */
1710/* */
1711/* Description: (MANDATORY) */
1712/* */
1713/* */
1714/******************************************************************************/
1715static int
1716ip2_write( PTTY tty, int user, const unsigned char *pData, int count)
1717{
1718 i2ChanStrPtr pCh = tty->driver_data;
1719 int bytesSent = 0;
1720 unsigned long flags;
1721
1722 ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
1723
1724 /* Flush out any buffered data left over from ip2_putchar() calls. */
1725 ip2_flush_chars( tty );
1726
1727 /* This is the actual move bit. Make sure it does what we need!!!!! */
1728 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1729 bytesSent = i2Output( pCh, pData, count, user );
1730 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1731
1732 ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
1733
1734 return bytesSent > 0 ? bytesSent : 0;
1735}
1736
1737/******************************************************************************/
1738/* Function: ip2_putchar() */
1739/* Parameters: Pointer to tty structure */
1740/* Character to write */
1741/* Returns: Nothing */
1742/* */
1743/* Description: */
1744/* */
1745/* */
1746/******************************************************************************/
1747static void
1748ip2_putchar( PTTY tty, unsigned char ch )
1749{
1750 i2ChanStrPtr pCh = tty->driver_data;
1751 unsigned long flags;
1752
1753// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
1754
1755 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1756 pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
1757 if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
1758 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1759 ip2_flush_chars( tty );
1760 } else
1761 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1762
1763// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
1764}
1765
1766/******************************************************************************/
1767/* Function: ip2_flush_chars() */
1768/* Parameters: Pointer to tty structure */
1769/* Returns: Nothing */
1770/* */
1771/* Description: */
1772/* */
1773/******************************************************************************/
1774static void
1775ip2_flush_chars( PTTY tty )
1776{
1777 int strip;
1778 i2ChanStrPtr pCh = tty->driver_data;
1779 unsigned long flags;
1780
1781 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1782 if ( pCh->Pbuf_stuff ) {
1783
1784// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
1785
1786 //
1787 // We may need to restart i2Output if it does not fullfill this request
1788 //
1789 strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff, 0 );
1790 if ( strip != pCh->Pbuf_stuff ) {
1791 memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
1792 }
1793 pCh->Pbuf_stuff -= strip;
1794 }
1795 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1796}
1797
1798/******************************************************************************/
1799/* Function: ip2_write_room() */
1800/* Parameters: Pointer to tty structure */
1801/* Returns: Number of bytes that the driver can accept */
1802/* */
1803/* Description: */
1804/* */
1805/******************************************************************************/
1806static int
1807ip2_write_room ( PTTY tty )
1808{
1809 int bytesFree;
1810 i2ChanStrPtr pCh = tty->driver_data;
1811 unsigned long flags;
1812
1813 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1814 bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
1815 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1816
1817 ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
1818
1819 return ((bytesFree > 0) ? bytesFree : 0);
1820}
1821
1822/******************************************************************************/
1823/* Function: ip2_chars_in_buf() */
1824/* Parameters: Pointer to tty structure */
1825/* Returns: Number of bytes queued for transmission */
1826/* */
1827/* Description: */
1828/* */
1829/* */
1830/******************************************************************************/
1831static int
1832ip2_chars_in_buf ( PTTY tty )
1833{
1834 i2ChanStrPtr pCh = tty->driver_data;
1835 int rc;
1836 unsigned long flags;
1837
1838 ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
1839
1840#ifdef IP2DEBUG_WRITE
1841 printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
1842 pCh->Obuf_char_count + pCh->Pbuf_stuff,
1843 pCh->Obuf_char_count, pCh->Pbuf_stuff );
1844#endif
1845 READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1846 rc = pCh->Obuf_char_count;
1847 READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1848 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1849 rc += pCh->Pbuf_stuff;
1850 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1851 return rc;
1852}
1853
1854/******************************************************************************/
1855/* Function: ip2_flush_buffer() */
1856/* Parameters: Pointer to tty structure */
1857/* Returns: Nothing */
1858/* */
1859/* Description: */
1860/* */
1861/* */
1862/******************************************************************************/
1863static void
1864ip2_flush_buffer( PTTY tty )
1865{
1866 i2ChanStrPtr pCh = tty->driver_data;
1867 unsigned long flags;
1868
1869 ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
1870
1871#ifdef IP2DEBUG_WRITE
1872 printk (KERN_DEBUG "IP2: flush buffer\n" );
1873#endif
1874 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1875 pCh->Pbuf_stuff = 0;
1876 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1877 i2FlushOutput( pCh );
1878 ip2_owake(tty);
1879
1880 ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
1881
1882}
1883
1884/******************************************************************************/
1885/* Function: ip2_wait_until_sent() */
1886/* Parameters: Pointer to tty structure */
1887/* Timeout for wait. */
1888/* Returns: Nothing */
1889/* */
1890/* Description: */
1891/* This function is used in place of the normal tty_wait_until_sent, which */
1892/* only waits for the driver buffers to be empty (or rather, those buffers */
1893/* reported by chars_in_buffer) which doesn't work for IP2 due to the */
1894/* indeterminate number of bytes buffered on the board. */
1895/******************************************************************************/
1896static void
1897ip2_wait_until_sent ( PTTY tty, int timeout )
1898{
1899 int i = jiffies;
1900 i2ChanStrPtr pCh = tty->driver_data;
1901
1902 tty_wait_until_sent(tty, timeout );
1903 if ( (i = timeout - (jiffies -i)) > 0)
1904 i2DrainOutput( pCh, i );
1905}
1906
1907/******************************************************************************/
1908/******************************************************************************/
1909/* Device Input Section */
1910/******************************************************************************/
1911/******************************************************************************/
1912
1913/******************************************************************************/
1914/* Function: ip2_throttle() */
1915/* Parameters: Pointer to tty structure */
1916/* Returns: Nothing */
1917/* */
1918/* Description: */
1919/* */
1920/* */
1921/******************************************************************************/
1922static void
1923ip2_throttle ( PTTY tty )
1924{
1925 i2ChanStrPtr pCh = tty->driver_data;
1926
1927#ifdef IP2DEBUG_READ
1928 printk (KERN_DEBUG "IP2: throttle\n" );
1929#endif
1930 /*
1931 * Signal the poll/interrupt handlers not to forward incoming data to
1932 * the line discipline. This will cause the buffers to fill up in the
1933 * library and thus cause the library routines to send the flow control
1934 * stuff.
1935 */
1936 pCh->throttled = 1;
1937}
1938
1939/******************************************************************************/
1940/* Function: ip2_unthrottle() */
1941/* Parameters: Pointer to tty structure */
1942/* Returns: Nothing */
1943/* */
1944/* Description: */
1945/* */
1946/* */
1947/******************************************************************************/
1948static void
1949ip2_unthrottle ( PTTY tty )
1950{
1951 i2ChanStrPtr pCh = tty->driver_data;
1952 unsigned long flags;
1953
1954#ifdef IP2DEBUG_READ
1955 printk (KERN_DEBUG "IP2: unthrottle\n" );
1956#endif
1957
1958 /* Pass incoming data up to the line discipline again. */
1959 pCh->throttled = 0;
1960 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1961 serviceOutgoingFifo( pCh->pMyBord );
1962 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1963 if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
1964 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1965#ifdef IP2DEBUG_READ
1966 printk (KERN_DEBUG "i2Input called from unthrottle\n" );
1967#endif
1968 i2Input( pCh );
1969 } else
1970 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1971}
1972
1973static void
1974ip2_start ( PTTY tty )
1975{
1976 i2ChanStrPtr pCh = DevTable[tty->index];
1977
1978 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1979 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
1980 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
1981#ifdef IP2DEBUG_WRITE
1982 printk (KERN_DEBUG "IP2: start tx\n" );
1983#endif
1984}
1985
1986static void
1987ip2_stop ( PTTY tty )
1988{
1989 i2ChanStrPtr pCh = DevTable[tty->index];
1990
1991 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
1992#ifdef IP2DEBUG_WRITE
1993 printk (KERN_DEBUG "IP2: stop tx\n" );
1994#endif
1995}
1996
1997/******************************************************************************/
1998/* Device Ioctl Section */
1999/******************************************************************************/
2000
2001static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
2002{
2003 i2ChanStrPtr pCh = DevTable[tty->index];
2004 wait_queue_t wait;
2005
2006 if (pCh == NULL)
2007 return -ENODEV;
2008
2009/*
2010 FIXME - the following code is causing a NULL pointer dereference in
2011 2.3.51 in an interrupt handler. It's suppose to prompt the board
2012 to return the DSS signal status immediately. Why doesn't it do
2013 the same thing in 2.2.14?
2014*/
2015
2016/* This thing is still busted in the 1.2.12 driver on 2.4.x
2017 and even hoses the serial console so the oops can be trapped.
2018 /\/\|=mhw=|\/\/ */
2019
2020#ifdef ENABLE_DSSNOW
2021 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
2022
2023 init_waitqueue_entry(&wait, current);
2024 add_wait_queue(&pCh->dss_now_wait, &wait);
2025 set_current_state( TASK_INTERRUPTIBLE );
2026
2027 serviceOutgoingFifo( pCh->pMyBord );
2028
2029 schedule();
2030
2031 set_current_state( TASK_RUNNING );
2032 remove_wait_queue(&pCh->dss_now_wait, &wait);
2033
2034 if (signal_pending(current)) {
2035 return -EINTR;
2036 }
2037#endif
2038 return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
2039 | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
2040 | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0)
2041 | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0)
2042 | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0)
2043 | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
2044}
2045
2046static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
2047 unsigned int set, unsigned int clear)
2048{
2049 i2ChanStrPtr pCh = DevTable[tty->index];
2050
2051 if (pCh == NULL)
2052 return -ENODEV;
2053
2054 if (set & TIOCM_RTS) {
2055 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
2056 pCh->dataSetOut |= I2_RTS;
2057 }
2058 if (set & TIOCM_DTR) {
2059 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
2060 pCh->dataSetOut |= I2_DTR;
2061 }
2062
2063 if (clear & TIOCM_RTS) {
2064 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
2065 pCh->dataSetOut &= ~I2_RTS;
2066 }
2067 if (clear & TIOCM_DTR) {
2068 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
2069 pCh->dataSetOut &= ~I2_DTR;
2070 }
2071 serviceOutgoingFifo( pCh->pMyBord );
2072 return 0;
2073}
2074
2075/******************************************************************************/
2076/* Function: ip2_ioctl() */
2077/* Parameters: Pointer to tty structure */
2078/* Pointer to file structure */
2079/* Command */
2080/* Argument */
2081/* Returns: Success or failure */
2082/* */
2083/* Description: */
2084/* */
2085/* */
2086/******************************************************************************/
2087static int
2088ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
2089{
2090 wait_queue_t wait;
2091 i2ChanStrPtr pCh = DevTable[tty->index];
2092 struct async_icount cprev, cnow; /* kernel counter temps */
2093 struct serial_icounter_struct __user *p_cuser;
2094 int rc = 0;
2095 unsigned long flags;
2096 void __user *argp = (void __user *)arg;
2097
2098 if ( pCh == NULL ) {
2099 return -ENODEV;
2100 }
2101
2102 ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
2103
2104#ifdef IP2DEBUG_IOCTL
2105 printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
2106#endif
2107
2108 switch(cmd) {
2109 case TIOCGSERIAL:
2110
2111 ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
2112
2113 rc = get_serial_info(pCh, argp);
2114 if (rc)
2115 return rc;
2116 break;
2117
2118 case TIOCSSERIAL:
2119
2120 ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
2121
2122 rc = set_serial_info(pCh, argp);
2123 if (rc)
2124 return rc;
2125 break;
2126
2127 case TCXONC:
2128 rc = tty_check_change(tty);
2129 if (rc)
2130 return rc;
2131 switch (arg) {
2132 case TCOOFF:
2133 //return -ENOIOCTLCMD;
2134 break;
2135 case TCOON:
2136 //return -ENOIOCTLCMD;
2137 break;
2138 case TCIOFF:
2139 if (STOP_CHAR(tty) != __DISABLED_CHAR) {
2140 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2141 CMD_XMIT_NOW(STOP_CHAR(tty)));
2142 }
2143 break;
2144 case TCION:
2145 if (START_CHAR(tty) != __DISABLED_CHAR) {
2146 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2147 CMD_XMIT_NOW(START_CHAR(tty)));
2148 }
2149 break;
2150 default:
2151 return -EINVAL;
2152 }
2153 return 0;
2154
2155 case TCSBRK: /* SVID version: non-zero arg --> no break */
2156 rc = tty_check_change(tty);
2157
2158 ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
2159
2160 if (!rc) {
2161 ip2_wait_until_sent(tty,0);
2162 if (!arg) {
2163 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
2164 serviceOutgoingFifo( pCh->pMyBord );
2165 }
2166 }
2167 break;
2168
2169 case TCSBRKP: /* support for POSIX tcsendbreak() */
2170 rc = tty_check_change(tty);
2171
2172 ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
2173
2174 if (!rc) {
2175 ip2_wait_until_sent(tty,0);
2176 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2177 CMD_SEND_BRK(arg ? arg*100 : 250));
2178 serviceOutgoingFifo ( pCh->pMyBord );
2179 }
2180 break;
2181
2182 case TIOCGSOFTCAR:
2183
2184 ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
2185
2186 rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
2187 if (rc)
2188 return rc;
2189 break;
2190
2191 case TIOCSSOFTCAR:
2192
2193 ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
2194
2195 rc = get_user(arg,(unsigned long __user *) argp);
2196 if (rc)
2197 return rc;
2198 tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
2199 | (arg ? CLOCAL : 0));
2200
2201 break;
2202
2203 /*
2204 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
2205 * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
2206 * for masking). Caller should use TIOCGICOUNT to see which one it was
2207 */
2208 case TIOCMIWAIT:
2209 save_flags(flags);cli();
2210 cprev = pCh->icount; /* note the counters on entry */
2211 restore_flags(flags);
2212 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
2213 CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
2214 init_waitqueue_entry(&wait, current);
2215 add_wait_queue(&pCh->delta_msr_wait, &wait);
2216 set_current_state( TASK_INTERRUPTIBLE );
2217
2218 serviceOutgoingFifo( pCh->pMyBord );
2219 for(;;) {
2220 ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
2221
2222 schedule();
2223
2224 ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
2225
2226 /* see if a signal did it */
2227 if (signal_pending(current)) {
2228 rc = -ERESTARTSYS;
2229 break;
2230 }
2231 save_flags(flags);cli();
2232 cnow = pCh->icount; /* atomic copy */
2233 restore_flags(flags);
2234 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2235 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2236 rc = -EIO; /* no change => rc */
2237 break;
2238 }
2239 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2240 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2241 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2242 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
2243 rc = 0;
2244 break;
2245 }
2246 cprev = cnow;
2247 }
2248 set_current_state( TASK_RUNNING );
2249 remove_wait_queue(&pCh->delta_msr_wait, &wait);
2250
2251 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3,
2252 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
2253 if ( ! (pCh->flags & ASYNC_CHECK_CD)) {
2254 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
2255 }
2256 serviceOutgoingFifo( pCh->pMyBord );
2257 return rc;
2258 break;
2259
2260 /*
2261 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2262 * Return: write counters to the user passed counter struct
2263 * NB: both 1->0 and 0->1 transitions are counted except for RI where
2264 * only 0->1 is counted. The controller is quite capable of counting
2265 * both, but this done to preserve compatibility with the standard
2266 * serial driver.
2267 */
2268 case TIOCGICOUNT:
2269 ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
2270
2271 save_flags(flags);cli();
2272 cnow = pCh->icount;
2273 restore_flags(flags);
2274 p_cuser = argp;
2275 rc = put_user(cnow.cts, &p_cuser->cts);
2276 rc = put_user(cnow.dsr, &p_cuser->dsr);
2277 rc = put_user(cnow.rng, &p_cuser->rng);
2278 rc = put_user(cnow.dcd, &p_cuser->dcd);
2279 rc = put_user(cnow.rx, &p_cuser->rx);
2280 rc = put_user(cnow.tx, &p_cuser->tx);
2281 rc = put_user(cnow.frame, &p_cuser->frame);
2282 rc = put_user(cnow.overrun, &p_cuser->overrun);
2283 rc = put_user(cnow.parity, &p_cuser->parity);
2284 rc = put_user(cnow.brk, &p_cuser->brk);
2285 rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
2286 break;
2287
2288 /*
2289 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
2290 * will be passed to the line discipline for it to handle.
2291 */
2292 case TIOCSERCONFIG:
2293 case TIOCSERGWILD:
2294 case TIOCSERGETLSR:
2295 case TIOCSERSWILD:
2296 case TIOCSERGSTRUCT:
2297 case TIOCSERGETMULTI:
2298 case TIOCSERSETMULTI:
2299
2300 default:
2301 ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
2302
2303 rc = -ENOIOCTLCMD;
2304 break;
2305 }
2306
2307 ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
2308
2309 return rc;
2310}
2311
2312/******************************************************************************/
2313/* Function: GetSerialInfo() */
2314/* Parameters: Pointer to channel structure */
2315/* Pointer to old termios structure */
2316/* Returns: Nothing */
2317/* */
2318/* Description: */
2319/* This is to support the setserial command, and requires processing of the */
2320/* standard Linux serial structure. */
2321/******************************************************************************/
2322static int
2323get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
2324{
2325 struct serial_struct tmp;
2326
2327 memset ( &tmp, 0, sizeof(tmp) );
2328 tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
2329 if (BID_HAS_654(tmp.type)) {
2330 tmp.type = PORT_16650;
2331 } else {
2332 tmp.type = PORT_CIRRUS;
2333 }
2334 tmp.line = pCh->port_index;
2335 tmp.port = pCh->pMyBord->i2eBase;
2336 tmp.irq = ip2config.irq[pCh->port_index/64];
2337 tmp.flags = pCh->flags;
2338 tmp.baud_base = pCh->BaudBase;
2339 tmp.close_delay = pCh->ClosingDelay;
2340 tmp.closing_wait = pCh->ClosingWaitTime;
2341 tmp.custom_divisor = pCh->BaudDivisor;
2342 return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
2343}
2344
2345/******************************************************************************/
2346/* Function: SetSerialInfo() */
2347/* Parameters: Pointer to channel structure */
2348/* Pointer to old termios structure */
2349/* Returns: Nothing */
2350/* */
2351/* Description: */
2352/* This function provides support for setserial, which uses the TIOCSSERIAL */
2353/* ioctl. Not all setserial parameters are relevant. If the user attempts to */
2354/* change the IRQ, address or type of the port the ioctl fails. */
2355/******************************************************************************/
2356static int
2357set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
2358{
2359 struct serial_struct ns;
2360 int old_flags, old_baud_divisor;
2361
2362 if (copy_from_user(&ns, new_info, sizeof (ns)))
2363 return -EFAULT;
2364
2365 /*
2366 * We don't allow setserial to change IRQ, board address, type or baud
2367 * base. Also line nunber as such is meaningless but we use it for our
2368 * array index so it is fixed also.
2369 */
2370 if ( (ns.irq != ip2config.irq[pCh->port_index])
2371 || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase)))
2372 || (ns.baud_base != pCh->BaudBase)
2373 || (ns.line != pCh->port_index) ) {
2374 return -EINVAL;
2375 }
2376
2377 old_flags = pCh->flags;
2378 old_baud_divisor = pCh->BaudDivisor;
2379
2380 if ( !capable(CAP_SYS_ADMIN) ) {
2381 if ( ( ns.close_delay != pCh->ClosingDelay ) ||
2382 ( (ns.flags & ~ASYNC_USR_MASK) !=
2383 (pCh->flags & ~ASYNC_USR_MASK) ) ) {
2384 return -EPERM;
2385 }
2386
2387 pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
2388 (ns.flags & ASYNC_USR_MASK);
2389 pCh->BaudDivisor = ns.custom_divisor;
2390 } else {
2391 pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
2392 (ns.flags & ASYNC_FLAGS);
2393 pCh->BaudDivisor = ns.custom_divisor;
2394 pCh->ClosingDelay = ns.close_delay * HZ/100;
2395 pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
2396 }
2397
2398 if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
2399 || (old_baud_divisor != pCh->BaudDivisor) ) {
2400 // Invalidate speed and reset parameters
2401 set_params( pCh, NULL );
2402 }
2403
2404 return 0;
2405}
2406
2407/******************************************************************************/
2408/* Function: ip2_set_termios() */
2409/* Parameters: Pointer to tty structure */
2410/* Pointer to old termios structure */
2411/* Returns: Nothing */
2412/* */
2413/* Description: */
2414/* */
2415/* */
2416/******************************************************************************/
2417static void
2418ip2_set_termios( PTTY tty, struct termios *old_termios )
2419{
2420 i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
2421
2422#ifdef IP2DEBUG_IOCTL
2423 printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
2424#endif
2425
2426 set_params( pCh, old_termios );
2427}
2428
2429/******************************************************************************/
2430/* Function: ip2_set_line_discipline() */
2431/* Parameters: Pointer to tty structure */
2432/* Returns: Nothing */
2433/* */
2434/* Description: Does nothing */
2435/* */
2436/* */
2437/******************************************************************************/
2438static void
2439ip2_set_line_discipline ( PTTY tty )
2440{
2441#ifdef IP2DEBUG_IOCTL
2442 printk (KERN_DEBUG "IP2: set line discipline\n" );
2443#endif
2444
2445 ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
2446
2447}
2448
2449/******************************************************************************/
2450/* Function: SetLine Characteristics() */
2451/* Parameters: Pointer to channel structure */
2452/* Returns: Nothing */
2453/* */
2454/* Description: */
2455/* This routine is called to update the channel structure with the new line */
2456/* characteristics, and send the appropriate commands to the board when they */
2457/* change. */
2458/******************************************************************************/
2459static void
2460set_params( i2ChanStrPtr pCh, struct termios *o_tios )
2461{
2462 tcflag_t cflag, iflag, lflag;
2463 char stop_char, start_char;
2464 struct termios dummy;
2465
2466 lflag = pCh->pTTY->termios->c_lflag;
2467 cflag = pCh->pTTY->termios->c_cflag;
2468 iflag = pCh->pTTY->termios->c_iflag;
2469
2470 if (o_tios == NULL) {
2471 dummy.c_lflag = ~lflag;
2472 dummy.c_cflag = ~cflag;
2473 dummy.c_iflag = ~iflag;
2474 o_tios = &dummy;
2475 }
2476
2477 {
2478 switch ( cflag & CBAUD ) {
2479 case B0:
2480 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
2481 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
2482 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
2483 pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
2484 goto service_it;
2485 break;
2486 case B38400:
2487 /*
2488 * This is the speed that is overloaded with all the other high
2489 * speeds, depending upon the flag settings.
2490 */
2491 if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
2492 pCh->speed = CBR_57600;
2493 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
2494 pCh->speed = CBR_115200;
2495 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
2496 pCh->speed = CBR_C1;
2497 } else {
2498 pCh->speed = CBR_38400;
2499 }
2500 break;
2501 case B50: pCh->speed = CBR_50; break;
2502 case B75: pCh->speed = CBR_75; break;
2503 case B110: pCh->speed = CBR_110; break;
2504 case B134: pCh->speed = CBR_134; break;
2505 case B150: pCh->speed = CBR_150; break;
2506 case B200: pCh->speed = CBR_200; break;
2507 case B300: pCh->speed = CBR_300; break;
2508 case B600: pCh->speed = CBR_600; break;
2509 case B1200: pCh->speed = CBR_1200; break;
2510 case B1800: pCh->speed = CBR_1800; break;
2511 case B2400: pCh->speed = CBR_2400; break;
2512 case B4800: pCh->speed = CBR_4800; break;
2513 case B9600: pCh->speed = CBR_9600; break;
2514 case B19200: pCh->speed = CBR_19200; break;
2515 case B57600: pCh->speed = CBR_57600; break;
2516 case B115200: pCh->speed = CBR_115200; break;
2517 case B153600: pCh->speed = CBR_153600; break;
2518 case B230400: pCh->speed = CBR_230400; break;
2519 case B307200: pCh->speed = CBR_307200; break;
2520 case B460800: pCh->speed = CBR_460800; break;
2521 case B921600: pCh->speed = CBR_921600; break;
2522 default: pCh->speed = CBR_9600; break;
2523 }
2524 if ( pCh->speed == CBR_C1 ) {
2525 // Process the custom speed parameters.
2526 int bps = pCh->BaudBase / pCh->BaudDivisor;
2527 if ( bps == 921600 ) {
2528 pCh->speed = CBR_921600;
2529 } else {
2530 bps = bps/10;
2531 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
2532 }
2533 }
2534 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
2535
2536 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
2537 pCh->dataSetOut |= (I2_DTR | I2_RTS);
2538 }
2539 if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag))
2540 {
2541 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2542 CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
2543 }
2544 if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag))
2545 {
2546 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2547 CMD_SETPAR(
2548 (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
2549 )
2550 );
2551 }
2552 /* byte size and parity */
2553 if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag))
2554 {
2555 int datasize;
2556 switch ( cflag & CSIZE ) {
2557 case CS5: datasize = CSZ_5; break;
2558 case CS6: datasize = CSZ_6; break;
2559 case CS7: datasize = CSZ_7; break;
2560 case CS8: datasize = CSZ_8; break;
2561 default: datasize = CSZ_5; break; /* as per serial.c */
2562 }
2563 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
2564 }
2565 /* Process CTS flow control flag setting */
2566 if ( (cflag & CRTSCTS) ) {
2567 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2568 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
2569 } else {
2570 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2571 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
2572 }
2573 //
2574 // Process XON/XOFF flow control flags settings
2575 //
2576 stop_char = STOP_CHAR(pCh->pTTY);
2577 start_char = START_CHAR(pCh->pTTY);
2578
2579 //////////// can't be \000
2580 if (stop_char == __DISABLED_CHAR )
2581 {
2582 stop_char = ~__DISABLED_CHAR;
2583 }
2584 if (start_char == __DISABLED_CHAR )
2585 {
2586 start_char = ~__DISABLED_CHAR;
2587 }
2588 /////////////////////////////////
2589
2590 if ( o_tios->c_cc[VSTART] != start_char )
2591 {
2592 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
2593 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
2594 }
2595 if ( o_tios->c_cc[VSTOP] != stop_char )
2596 {
2597 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
2598 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
2599 }
2600 if (stop_char == __DISABLED_CHAR )
2601 {
2602 stop_char = ~__DISABLED_CHAR; //TEST123
2603 goto no_xoff;
2604 }
2605 if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF)))
2606 {
2607 if ( iflag & IXOFF ) { // Enable XOFF output flow control
2608 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
2609 } else { // Disable XOFF output flow control
2610no_xoff:
2611 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
2612 }
2613 }
2614 if (start_char == __DISABLED_CHAR )
2615 {
2616 goto no_xon;
2617 }
2618 if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY)))
2619 {
2620 if ( iflag & IXON ) {
2621 if ( iflag & IXANY ) { // Enable XON/XANY output flow control
2622 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
2623 } else { // Enable XON output flow control
2624 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
2625 }
2626 } else { // Disable XON output flow control
2627no_xon:
2628 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
2629 }
2630 }
2631 if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) )
2632 {
2633 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2634 CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
2635 }
2636 if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) )
2637 {
2638 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2639 CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
2640 }
2641
2642 if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR))
2643 ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) )
2644 {
2645 char brkrpt = 0;
2646 char parrpt = 0;
2647
2648 if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
2649 /* Ignore breaks altogether */
2650 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
2651 } else {
2652 if ( iflag & BRKINT ) {
2653 if ( iflag & PARMRK ) {
2654 brkrpt = 0x0a; // exception an inline triple
2655 } else {
2656 brkrpt = 0x1a; // exception and NULL
2657 }
2658 brkrpt |= 0x04; // flush input
2659 } else {
2660 if ( iflag & PARMRK ) {
2661 brkrpt = 0x0b; //POSIX triple \0377 \0 \0
2662 } else {
2663 brkrpt = 0x01; // Null only
2664 }
2665 }
2666 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
2667 }
2668
2669 if (iflag & IGNPAR) {
2670 parrpt = 0x20;
2671 /* would be 2 for not cirrus bug */
2672 /* would be 0x20 cept for cirrus bug */
2673 } else {
2674 if ( iflag & PARMRK ) {
2675 /*
2676 * Replace error characters with 3-byte sequence (\0377,\0,char)
2677 */
2678 parrpt = 0x04 ;
2679 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
2680 } else {
2681 parrpt = 0x03;
2682 }
2683 }
2684 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
2685 }
2686 if (cflag & CLOCAL) {
2687 // Status reporting fails for DCD if this is off
2688 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
2689 pCh->flags &= ~ASYNC_CHECK_CD;
2690 } else {
2691 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
2692 pCh->flags |= ASYNC_CHECK_CD;
2693 }
2694
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2695service_it:
2696 i2DrainOutput( pCh, 100 );
2697}
2698
2699/******************************************************************************/
2700/* IPL Device Section */
2701/******************************************************************************/
2702
2703/******************************************************************************/
2704/* Function: ip2_ipl_read() */
2705/* Parameters: Pointer to device inode */
2706/* Pointer to file structure */
2707/* Pointer to data */
2708/* Number of bytes to read */
2709/* Returns: Success or failure */
2710/* */
2711/* Description: Ugly */
2712/* */
2713/* */
2714/******************************************************************************/
2715
2716static
2717ssize_t
2718ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
2719{
2720 unsigned int minor = iminor(pFile->f_dentry->d_inode);
2721 int rc = 0;
2722
2723#ifdef IP2DEBUG_IPL
2724 printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
2725#endif
2726
2727 switch( minor ) {
2728 case 0: // IPL device
2729 rc = -EINVAL;
2730 break;
2731 case 1: // Status dump
2732 rc = -EINVAL;
2733 break;
2734 case 2: // Ping device
2735 rc = -EINVAL;
2736 break;
2737 case 3: // Trace device
2738 rc = DumpTraceBuffer ( pData, count );
2739 break;
2740 case 4: // Trace device
2741 rc = DumpFifoBuffer ( pData, count );
2742 break;
2743 default:
2744 rc = -ENODEV;
2745 break;
2746 }
2747 return rc;
2748}
2749
2750static int
2751DumpFifoBuffer ( char __user *pData, int count )
2752{
2753#ifdef DEBUG_FIFO
2754 int rc;
2755 rc = copy_to_user(pData, DBGBuf, count);
2756
2757 printk(KERN_DEBUG "Last index %d\n", I );
2758
2759 return count;
2760#endif /* DEBUG_FIFO */
2761 return 0;
2762}
2763
2764static int
2765DumpTraceBuffer ( char __user *pData, int count )
2766{
2767#ifdef IP2DEBUG_TRACE
2768 int rc;
2769 int dumpcount;
2770 int chunk;
2771 int *pIndex = (int __user *)pData;
2772
2773 if ( count < (sizeof(int) * 6) ) {
2774 return -EIO;
2775 }
2776 rc = put_user(tracewrap, pIndex );
2777 rc = put_user(TRACEMAX, ++pIndex );
2778 rc = put_user(tracestrip, ++pIndex );
2779 rc = put_user(tracestuff, ++pIndex );
2780 pData += sizeof(int) * 6;
2781 count -= sizeof(int) * 6;
2782
2783 dumpcount = tracestuff - tracestrip;
2784 if ( dumpcount < 0 ) {
2785 dumpcount += TRACEMAX;
2786 }
2787 if ( dumpcount > count ) {
2788 dumpcount = count;
2789 }
2790 chunk = TRACEMAX - tracestrip;
2791 if ( dumpcount > chunk ) {
2792 rc = copy_to_user(pData, &tracebuf[tracestrip],
2793 chunk * sizeof(tracebuf[0]) );
2794 pData += chunk * sizeof(tracebuf[0]);
2795 tracestrip = 0;
2796 chunk = dumpcount - chunk;
2797 } else {
2798 chunk = dumpcount;
2799 }
2800 rc = copy_to_user(pData, &tracebuf[tracestrip],
2801 chunk * sizeof(tracebuf[0]) );
2802 tracestrip += chunk;
2803 tracewrap = 0;
2804
2805 rc = put_user(tracestrip, ++pIndex );
2806 rc = put_user(tracestuff, ++pIndex );
2807
2808 return dumpcount;
2809#else
2810 return 0;
2811#endif
2812}
2813
2814/******************************************************************************/
2815/* Function: ip2_ipl_write() */
2816/* Parameters: */
2817/* Pointer to file structure */
2818/* Pointer to data */
2819/* Number of bytes to write */
2820/* Returns: Success or failure */
2821/* */
2822/* Description: */
2823/* */
2824/* */
2825/******************************************************************************/
2826static ssize_t
2827ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
2828{
2829#ifdef IP2DEBUG_IPL
2830 printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
2831#endif
2832 return 0;
2833}
2834
2835/******************************************************************************/
2836/* Function: ip2_ipl_ioctl() */
2837/* Parameters: Pointer to device inode */
2838/* Pointer to file structure */
2839/* Command */
2840/* Argument */
2841/* Returns: Success or failure */
2842/* */
2843/* Description: */
2844/* */
2845/* */
2846/******************************************************************************/
2847static int
2848ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
2849{
2850 unsigned int iplminor = iminor(pInode);
2851 int rc = 0;
2852 void __user *argp = (void __user *)arg;
2853 ULONG __user *pIndex = argp;
2854 i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
2855 i2ChanStrPtr pCh;
2856
2857#ifdef IP2DEBUG_IPL
2858 printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
2859#endif
2860
2861 switch ( iplminor ) {
2862 case 0: // IPL device
2863 rc = -EINVAL;
2864 break;
2865 case 1: // Status dump
2866 case 5:
2867 case 9:
2868 case 13:
2869 switch ( cmd ) {
2870 case 64: /* Driver - ip2stat */
2871 rc = put_user(ip2_tty_driver->refcount, pIndex++ );
2872 rc = put_user(irq_counter, pIndex++ );
2873 rc = put_user(bh_counter, pIndex++ );
2874 break;
2875
2876 case 65: /* Board - ip2stat */
2877 if ( pB ) {
2878 rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
2879 rc = put_user(INB(pB->i2eStatus),
2880 (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
2881 } else {
2882 rc = -ENODEV;
2883 }
2884 break;
2885
2886 default:
2887 if (cmd < IP2_MAX_PORTS) {
2888 pCh = DevTable[cmd];
2889 if ( pCh )
2890 {
2891 rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
2892 } else {
2893 rc = -ENODEV;
2894 }
2895 } else {
2896 rc = -EINVAL;
2897 }
2898 }
2899 break;
2900
2901 case 2: // Ping device
2902 rc = -EINVAL;
2903 break;
2904 case 3: // Trace device
2905 if ( cmd == 1 ) {
2906 rc = put_user(iiSendPendingMail, pIndex++ );
2907 rc = put_user(i2InitChannels, pIndex++ );
2908 rc = put_user(i2QueueNeeds, pIndex++ );
2909 rc = put_user(i2QueueCommands, pIndex++ );
2910 rc = put_user(i2GetStatus, pIndex++ );
2911 rc = put_user(i2Input, pIndex++ );
2912 rc = put_user(i2InputFlush, pIndex++ );
2913 rc = put_user(i2Output, pIndex++ );
2914 rc = put_user(i2FlushOutput, pIndex++ );
2915 rc = put_user(i2DrainWakeup, pIndex++ );
2916 rc = put_user(i2DrainOutput, pIndex++ );
2917 rc = put_user(i2OutputFree, pIndex++ );
2918 rc = put_user(i2StripFifo, pIndex++ );
2919 rc = put_user(i2StuffFifoBypass, pIndex++ );
2920 rc = put_user(i2StuffFifoFlow, pIndex++ );
2921 rc = put_user(i2StuffFifoInline, pIndex++ );
2922 rc = put_user(i2ServiceBoard, pIndex++ );
2923 rc = put_user(serviceOutgoingFifo, pIndex++ );
2924 // rc = put_user(ip2_init, pIndex++ );
2925 rc = put_user(ip2_init_board, pIndex++ );
2926 rc = put_user(find_eisa_board, pIndex++ );
2927 rc = put_user(set_irq, pIndex++ );
2928 rc = put_user(ip2_interrupt, pIndex++ );
2929 rc = put_user(ip2_poll, pIndex++ );
2930 rc = put_user(service_all_boards, pIndex++ );
2931 rc = put_user(do_input, pIndex++ );
2932 rc = put_user(do_status, pIndex++ );
2933#ifndef IP2DEBUG_OPEN
2934 rc = put_user(0, pIndex++ );
2935#else
2936 rc = put_user(open_sanity_check, pIndex++ );
2937#endif
2938 rc = put_user(ip2_open, pIndex++ );
2939 rc = put_user(ip2_close, pIndex++ );
2940 rc = put_user(ip2_hangup, pIndex++ );
2941 rc = put_user(ip2_write, pIndex++ );
2942 rc = put_user(ip2_putchar, pIndex++ );
2943 rc = put_user(ip2_flush_chars, pIndex++ );
2944 rc = put_user(ip2_write_room, pIndex++ );
2945 rc = put_user(ip2_chars_in_buf, pIndex++ );
2946 rc = put_user(ip2_flush_buffer, pIndex++ );
2947
2948 //rc = put_user(ip2_wait_until_sent, pIndex++ );
2949 rc = put_user(0, pIndex++ );
2950
2951 rc = put_user(ip2_throttle, pIndex++ );
2952 rc = put_user(ip2_unthrottle, pIndex++ );
2953 rc = put_user(ip2_ioctl, pIndex++ );
2954 rc = put_user(0, pIndex++ );
2955 rc = put_user(get_serial_info, pIndex++ );
2956 rc = put_user(set_serial_info, pIndex++ );
2957 rc = put_user(ip2_set_termios, pIndex++ );
2958 rc = put_user(ip2_set_line_discipline, pIndex++ );
2959 rc = put_user(set_params, pIndex++ );
2960 } else {
2961 rc = -EINVAL;
2962 }
2963
2964 break;
2965
2966 default:
2967 rc = -ENODEV;
2968 break;
2969 }
2970 return rc;
2971}
2972
2973/******************************************************************************/
2974/* Function: ip2_ipl_open() */
2975/* Parameters: Pointer to device inode */
2976/* Pointer to file structure */
2977/* Returns: Success or failure */
2978/* */
2979/* Description: */
2980/* */
2981/* */
2982/******************************************************************************/
2983static int
2984ip2_ipl_open( struct inode *pInode, struct file *pFile )
2985{
2986 unsigned int iplminor = iminor(pInode);
2987 i2eBordStrPtr pB;
2988 i2ChanStrPtr pCh;
2989
2990#ifdef IP2DEBUG_IPL
2991 printk (KERN_DEBUG "IP2IPL: open\n" );
2992#endif
2993
2994 switch(iplminor) {
2995 // These are the IPL devices
2996 case 0:
2997 case 4:
2998 case 8:
2999 case 12:
3000 break;
3001
3002 // These are the status devices
3003 case 1:
3004 case 5:
3005 case 9:
3006 case 13:
3007 break;
3008
3009 // These are the debug devices
3010 case 2:
3011 case 6:
3012 case 10:
3013 case 14:
3014 pB = i2BoardPtrTable[iplminor / 4];
3015 pCh = (i2ChanStrPtr) pB->i2eChannelPtr;
3016 break;
3017
3018 // This is the trace device
3019 case 3:
3020 break;
3021 }
3022 return 0;
3023}
3024/******************************************************************************/
3025/* Function: ip2_read_procmem */
3026/* Parameters: */
3027/* */
3028/* Returns: Length of output */
3029/* */
3030/* Description: */
3031/* Supplies some driver operating parameters */
3032/* Not real useful unless your debugging the fifo */
3033/* */
3034/******************************************************************************/
3035
3036#define LIMIT (PAGE_SIZE - 120)
3037
3038static int
3039ip2_read_procmem(char *buf, char **start, off_t offset, int len)
3040{
3041 i2eBordStrPtr pB;
3042 i2ChanStrPtr pCh;
3043 PTTY tty;
3044 int i;
3045
3046 len = 0;
3047
3048#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
3049#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
3050#define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
3051
3052 len += sprintf(buf+len,"\n");
3053
3054 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
3055 pB = i2BoardPtrTable[i];
3056 if ( pB ) {
3057 len += sprintf(buf+len,"board %d:\n",i);
3058 len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n",
3059 pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
3060 }
3061 }
3062
3063 len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n");
3064 for (i=0; i < IP2_MAX_PORTS; i++) {
3065 if (len > LIMIT)
3066 break;
3067 pCh = DevTable[i];
3068 if (pCh) {
3069 tty = pCh->pTTY;
3070 if (tty && tty->count) {
3071 len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags,
3072 tty->termios->c_cflag,tty->termios->c_iflag);
3073
3074 len += sprintf(buf+len,FMTLIN2,
3075 pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
3076 len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room);
3077 }
3078 }
3079 }
3080 return len;
3081}
3082
3083/*
3084 * This is the handler for /proc/tty/driver/ip2
3085 *
3086 * This stretch of code has been largely plagerized from at least three
3087 * different sources including ip2mkdev.c and a couple of other drivers.
3088 * The bugs are all mine. :-) =mhw=
3089 */
3090static int ip2_read_proc(char *page, char **start, off_t off,
3091 int count, int *eof, void *data)
3092{
3093 int i, j, box;
3094 int len = 0;
3095 int boxes = 0;
3096 int ports = 0;
3097 int tports = 0;
3098 off_t begin = 0;
3099 i2eBordStrPtr pB;
3100
3101 len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion );
3102 len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
3103 IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
3104 IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
3105
3106 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
3107 /* This need to be reset for a board by board count... */
3108 boxes = 0;
3109 pB = i2BoardPtrTable[i];
3110 if( pB ) {
3111 switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
3112 {
3113 case POR_ID_FIIEX:
3114 len += sprintf( page+len, "Board %d: EX ports=", i );
3115 for( box = 0; box < ABS_MAX_BOXES; ++box )
3116 {
3117 ports = 0;
3118
3119 if( pB->i2eChannelMap[box] != 0 ) ++boxes;
3120 for( j = 0; j < ABS_BIGGEST_BOX; ++j )
3121 {
3122 if( pB->i2eChannelMap[box] & 1<< j ) {
3123 ++ports;
3124 }
3125 }
3126 len += sprintf( page+len, "%d,", ports );
3127 tports += ports;
3128 }
3129
3130 --len; /* Backup over that last comma */
3131
3132 len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 );
3133 break;
3134
3135 case POR_ID_II_4:
3136 len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i );
3137 tports = ports = 4;
3138 break;
3139
3140 case POR_ID_II_8:
3141 len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i );
3142 tports = ports = 8;
3143 break;
3144
3145 case POR_ID_II_8R:
3146 len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i );
3147 tports = ports = 8;
3148 break;
3149
3150 default:
3151 len += sprintf(page+len, "Board %d: unknown", i );
3152 /* Don't try and probe for minor numbers */
3153 tports = ports = 0;
3154 }
3155
3156 } else {
3157 /* Don't try and probe for minor numbers */
3158 len += sprintf(page+len, "Board %d: vacant", i );
3159 tports = ports = 0;
3160 }
3161
3162 if( tports ) {
3163 len += sprintf(page+len, " minors=" );
3164
3165 for ( box = 0; box < ABS_MAX_BOXES; ++box )
3166 {
3167 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
3168 {
3169 if ( pB->i2eChannelMap[box] & (1 << j) )
3170 {
3171 len += sprintf (page+len,"%d,",
3172 j + ABS_BIGGEST_BOX *
3173 (box+i*ABS_MAX_BOXES));
3174 }
3175 }
3176 }
3177
3178 page[ len - 1 ] = '\n'; /* Overwrite that last comma */
3179 } else {
3180 len += sprintf (page+len,"\n" );
3181 }
3182
3183 if (len+begin > off+count)
3184 break;
3185 if (len+begin < off) {
3186 begin += len;
3187 len = 0;
3188 }
3189 }
3190
3191 if (i >= IP2_MAX_BOARDS)
3192 *eof = 1;
3193 if (off >= len+begin)
3194 return 0;
3195
3196 *start = page + (off-begin);
3197 return ((count < begin+len-off) ? count : begin+len-off);
3198 }
3199
3200/******************************************************************************/
3201/* Function: ip2trace() */
3202/* Parameters: Value to add to trace buffer */
3203/* Returns: Nothing */
3204/* */
3205/* Description: */
3206/* */
3207/* */
3208/******************************************************************************/
3209#ifdef IP2DEBUG_TRACE
3210void
3211ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
3212{
3213 long flags;
3214 unsigned long *pCode = &codes;
3215 union ip2breadcrumb bc;
3216 i2ChanStrPtr pCh;
3217
3218
3219 tracebuf[tracestuff++] = jiffies;
3220 if ( tracestuff == TRACEMAX ) {
3221 tracestuff = 0;
3222 }
3223 if ( tracestuff == tracestrip ) {
3224 if ( ++tracestrip == TRACEMAX ) {
3225 tracestrip = 0;
3226 }
3227 ++tracewrap;
3228 }
3229
3230 bc.hdr.port = 0xff & pn;
3231 bc.hdr.cat = cat;
3232 bc.hdr.codes = (unsigned char)( codes & 0xff );
3233 bc.hdr.label = label;
3234 tracebuf[tracestuff++] = bc.value;
3235
3236 for (;;) {
3237 if ( tracestuff == TRACEMAX ) {
3238 tracestuff = 0;
3239 }
3240 if ( tracestuff == tracestrip ) {
3241 if ( ++tracestrip == TRACEMAX ) {
3242 tracestrip = 0;
3243 }
3244 ++tracewrap;
3245 }
3246
3247 if ( !codes-- )
3248 break;
3249
3250 tracebuf[tracestuff++] = *++pCode;
3251 }
3252}
3253#endif
3254
3255
3256MODULE_LICENSE("GPL");