blob: 4ac85a09c5a6724785435dbf640ec4450afe5f24 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Moxa C101 synchronous serial card driver for Linux
3 *
4 * Copyright (C) 2000-2003 Krzysztof Halasa <khc@pm.waw.pl>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of version 2 of the GNU General Public License
8 * as published by the Free Software Foundation.
9 *
Krzysztof Halasa467c4322006-06-26 21:36:52 +020010 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
Linus Torvalds1da177e2005-04-16 15:20:36 -070011 *
12 * Sources of information:
13 * Hitachi HD64570 SCA User's Manual
14 * Moxa C101 User's Manual
15 */
16
17#include <linux/module.h>
18#include <linux/kernel.h>
Ingo Molnar86ae13b2009-10-12 16:22:46 +020019#include <linux/capability.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070020#include <linux/slab.h>
21#include <linux/types.h>
22#include <linux/string.h>
23#include <linux/errno.h>
24#include <linux/init.h>
25#include <linux/moduleparam.h>
26#include <linux/netdevice.h>
27#include <linux/hdlc.h>
28#include <linux/delay.h>
29#include <asm/io.h>
30
31#include "hd64570.h"
32
33
34static const char* version = "Moxa C101 driver version: 1.15";
35static const char* devname = "C101";
36
37#undef DEBUG_PKT
38#define DEBUG_RINGS
39
40#define C101_PAGE 0x1D00
41#define C101_DTR 0x1E00
42#define C101_SCA 0x1F00
43#define C101_WINDOW_SIZE 0x2000
44#define C101_MAPPED_RAM_SIZE 0x4000
45
46#define RAM_SIZE (256 * 1024)
47#define TX_RING_BUFFERS 10
48#define RX_RING_BUFFERS ((RAM_SIZE - C101_WINDOW_SIZE) / \
49 (sizeof(pkt_desc) + HDLC_MAX_MRU) - TX_RING_BUFFERS)
50
51#define CLOCK_BASE 9830400 /* 9.8304 MHz */
52#define PAGE0_ALWAYS_MAPPED
53
54static char *hw; /* pointer to hw=xxx command line string */
55
56
57typedef struct card_s {
58 struct net_device *dev;
59 spinlock_t lock; /* TX lock */
60 u8 __iomem *win0base; /* ISA window base address */
61 u32 phy_winbase; /* ISA physical base address */
62 sync_serial_settings settings;
63 int rxpart; /* partial frame received, next frame invalid*/
64 unsigned short encoding;
65 unsigned short parity;
66 u16 rx_ring_buffers; /* number of buffers in a ring */
67 u16 tx_ring_buffers;
68 u16 buff_offset; /* offset of first buffer of first channel */
69 u16 rxin; /* rx ring buffer 'in' pointer */
70 u16 txin; /* tx ring buffer 'in' and 'last' pointers */
71 u16 txlast;
72 u8 rxs, txs, tmc; /* SCA registers */
73 u8 irq; /* IRQ (3-15) */
74 u8 page;
75
76 struct card_s *next_card;
77}card_t;
78
79typedef card_t port_t;
80
81static card_t *first_card;
82static card_t **new_card = &first_card;
83
84
85#define sca_in(reg, card) readb((card)->win0base + C101_SCA + (reg))
86#define sca_out(value, reg, card) writeb(value, (card)->win0base + C101_SCA + (reg))
87#define sca_inw(reg, card) readw((card)->win0base + C101_SCA + (reg))
88
89/* EDA address register must be set in EDAL, EDAH order - 8 bit ISA bus */
90#define sca_outw(value, reg, card) do { \
91 writeb(value & 0xFF, (card)->win0base + C101_SCA + (reg)); \
Krzysztof Hałasa88597362008-03-24 19:12:23 +010092 writeb((value >> 8 ) & 0xFF, (card)->win0base + C101_SCA + (reg + 1));\
Linus Torvalds1da177e2005-04-16 15:20:36 -070093} while(0)
94
95#define port_to_card(port) (port)
96#define log_node(port) (0)
97#define phy_node(port) (0)
98#define winsize(card) (C101_WINDOW_SIZE)
99#define win0base(card) ((card)->win0base)
100#define winbase(card) ((card)->win0base + 0x2000)
101#define get_port(card, port) (card)
102static void sca_msci_intr(port_t *port);
103
104
105static inline u8 sca_get_page(card_t *card)
106{
107 return card->page;
108}
109
110static inline void openwin(card_t *card, u8 page)
111{
112 card->page = page;
113 writeb(page, card->win0base + C101_PAGE);
114}
115
116
Krzysztof Hałasa6b40aba2008-03-24 16:39:02 +0100117#include "hd64570.c"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118
119
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700120static inline void set_carrier(port_t *port)
121{
Krzysztof Halasaa76b0442006-08-16 01:52:23 +0200122 if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD))
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700123 netif_carrier_on(port_to_dev(port));
124 else
125 netif_carrier_off(port_to_dev(port));
126}
127
128
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129static void sca_msci_intr(port_t *port)
130{
Krzysztof Halasaa76b0442006-08-16 01:52:23 +0200131 u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132
Krzysztof Halasaa76b0442006-08-16 01:52:23 +0200133 /* Reset MSCI TX underrun and CDCD (ignored) status bit */
134 sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136 if (stat & ST1_UDRN) {
Krzysztof Halasa198191c2008-06-30 23:26:53 +0200137 /* TX Underrun error detected */
138 port_to_dev(port)->stats.tx_errors++;
139 port_to_dev(port)->stats.tx_fifo_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140 }
141
Krzysztof Halasaa76b0442006-08-16 01:52:23 +0200142 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 /* Reset MSCI CDCD status bit - uses ch#2 DCD input */
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700144 sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145
146 if (stat & ST1_CDCD)
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700147 set_carrier(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148}
149
150
151static void c101_set_iface(port_t *port)
152{
153 u8 rxs = port->rxs & CLK_BRG_MASK;
154 u8 txs = port->txs & CLK_BRG_MASK;
155
156 switch(port->settings.clock_type) {
157 case CLOCK_INT:
158 rxs |= CLK_BRG_RX; /* TX clock */
159 txs |= CLK_RXCLK_TX; /* BRG output */
160 break;
161
162 case CLOCK_TXINT:
163 rxs |= CLK_LINE_RX; /* RXC input */
164 txs |= CLK_BRG_TX; /* BRG output */
165 break;
166
167 case CLOCK_TXFROMRX:
168 rxs |= CLK_LINE_RX; /* RXC input */
169 txs |= CLK_RXCLK_TX; /* RX clock */
170 break;
171
172 default: /* EXTernal clock */
173 rxs |= CLK_LINE_RX; /* RXC input */
174 txs |= CLK_LINE_TX; /* TXC input */
175 }
176
177 port->rxs = rxs;
178 port->txs = txs;
179 sca_out(rxs, MSCI1_OFFSET + RXS, port);
180 sca_out(txs, MSCI1_OFFSET + TXS, port);
181 sca_set_port(port);
182}
183
184
185static int c101_open(struct net_device *dev)
186{
187 port_t *port = dev_to_port(dev);
188 int result;
189
190 result = hdlc_open(dev);
191 if (result)
192 return result;
193
194 writeb(1, port->win0base + C101_DTR);
195 sca_out(0, MSCI1_OFFSET + CTL, port); /* RTS uses ch#2 output */
196 sca_open(dev);
197 /* DCD is connected to port 2 !@#$%^& - disable MSCI0 CDCD interrupt */
198 sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
199 sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
200
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700201 set_carrier(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202
203 /* enable MSCI1 CDCD interrupt */
204 sca_out(IE1_CDCD, MSCI1_OFFSET + IE1, port);
205 sca_out(IE0_RXINTA, MSCI1_OFFSET + IE0, port);
206 sca_out(0x48, IER0, port); /* TXINT #0 and RXINT #1 */
207 c101_set_iface(port);
208 return 0;
209}
210
211
212static int c101_close(struct net_device *dev)
213{
214 port_t *port = dev_to_port(dev);
215
216 sca_close(dev);
217 writeb(0, port->win0base + C101_DTR);
218 sca_out(CTL_NORTS, MSCI1_OFFSET + CTL, port);
219 hdlc_close(dev);
220 return 0;
221}
222
223
224static int c101_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
225{
226 const size_t size = sizeof(sync_serial_settings);
227 sync_serial_settings new_line;
228 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
229 port_t *port = dev_to_port(dev);
230
231#ifdef DEBUG_RINGS
232 if (cmd == SIOCDEVPRIVATE) {
233 sca_dump_rings(dev);
234 printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n",
235 sca_in(MSCI1_OFFSET + ST0, port),
236 sca_in(MSCI1_OFFSET + ST1, port),
237 sca_in(MSCI1_OFFSET + ST2, port),
238 sca_in(MSCI1_OFFSET + ST3, port));
239 return 0;
240 }
241#endif
242 if (cmd != SIOCWANDEV)
243 return hdlc_ioctl(dev, ifr, cmd);
244
245 switch(ifr->ifr_settings.type) {
246 case IF_GET_IFACE:
247 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
248 if (ifr->ifr_settings.size < size) {
249 ifr->ifr_settings.size = size; /* data size wanted */
250 return -ENOBUFS;
251 }
252 if (copy_to_user(line, &port->settings, size))
253 return -EFAULT;
254 return 0;
255
256 case IF_IFACE_SYNC_SERIAL:
257 if(!capable(CAP_NET_ADMIN))
258 return -EPERM;
259
260 if (copy_from_user(&new_line, line, size))
261 return -EFAULT;
262
263 if (new_line.clock_type != CLOCK_EXT &&
264 new_line.clock_type != CLOCK_TXFROMRX &&
265 new_line.clock_type != CLOCK_INT &&
266 new_line.clock_type != CLOCK_TXINT)
Julia Lawall354c8e32010-08-05 10:17:00 +0000267 return -EINVAL; /* No such clock setting */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268
269 if (new_line.loopback != 0 && new_line.loopback != 1)
270 return -EINVAL;
271
272 memcpy(&port->settings, &new_line, size); /* Update settings */
273 c101_set_iface(port);
274 return 0;
275
276 default:
277 return hdlc_ioctl(dev, ifr, cmd);
278 }
279}
280
281
282
283static void c101_destroy_card(card_t *card)
284{
285 readb(card->win0base + C101_PAGE); /* Resets SCA? */
286
287 if (card->irq)
288 free_irq(card->irq, card);
289
290 if (card->win0base) {
291 iounmap(card->win0base);
292 release_mem_region(card->phy_winbase, C101_MAPPED_RAM_SIZE);
293 }
294
295 free_netdev(card->dev);
296
297 kfree(card);
298}
299
Krzysztof Hałasa991990a2009-01-08 22:52:11 +0100300static const struct net_device_ops c101_ops = {
301 .ndo_open = c101_open,
302 .ndo_stop = c101_close,
303 .ndo_change_mtu = hdlc_change_mtu,
304 .ndo_start_xmit = hdlc_start_xmit,
305 .ndo_do_ioctl = c101_ioctl,
306};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
308static int __init c101_run(unsigned long irq, unsigned long winbase)
309{
310 struct net_device *dev;
311 hdlc_device *hdlc;
312 card_t *card;
313 int result;
314
315 if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
316 printk(KERN_ERR "c101: invalid IRQ value\n");
317 return -ENODEV;
318 }
319
320 if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
321 printk(KERN_ERR "c101: invalid RAM value\n");
322 return -ENODEV;
323 }
324
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700325 card = kzalloc(sizeof(card_t), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700326 if (card == NULL) {
327 printk(KERN_ERR "c101: unable to allocate memory\n");
328 return -ENOBUFS;
329 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330
331 card->dev = alloc_hdlcdev(card);
332 if (!card->dev) {
333 printk(KERN_ERR "c101: unable to allocate memory\n");
334 kfree(card);
335 return -ENOBUFS;
336 }
337
338 if (request_irq(irq, sca_intr, 0, devname, card)) {
339 printk(KERN_ERR "c101: could not allocate IRQ\n");
340 c101_destroy_card(card);
Krzysztof Halasa44460652006-06-22 22:29:28 +0200341 return -EBUSY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342 }
343 card->irq = irq;
344
345 if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
346 printk(KERN_ERR "c101: could not request RAM window\n");
347 c101_destroy_card(card);
Krzysztof Halasa44460652006-06-22 22:29:28 +0200348 return -EBUSY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349 }
350 card->phy_winbase = winbase;
351 card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
352 if (!card->win0base) {
353 printk(KERN_ERR "c101: could not map I/O address\n");
354 c101_destroy_card(card);
Krzysztof Halasa44460652006-06-22 22:29:28 +0200355 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356 }
357
358 card->tx_ring_buffers = TX_RING_BUFFERS;
359 card->rx_ring_buffers = RX_RING_BUFFERS;
360 card->buff_offset = C101_WINDOW_SIZE; /* Bytes 1D00-1FFF reserved */
361
362 readb(card->win0base + C101_PAGE); /* Resets SCA? */
363 udelay(100);
364 writeb(0, card->win0base + C101_PAGE);
365 writeb(0, card->win0base + C101_DTR); /* Power-up for RAM? */
366
367 sca_init(card, 0);
368
369 dev = port_to_dev(card);
370 hdlc = dev_to_hdlc(dev);
371
372 spin_lock_init(&card->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 dev->irq = irq;
374 dev->mem_start = winbase;
375 dev->mem_end = winbase + C101_MAPPED_RAM_SIZE - 1;
376 dev->tx_queue_len = 50;
Krzysztof Hałasa991990a2009-01-08 22:52:11 +0100377 dev->netdev_ops = &c101_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378 hdlc->attach = sca_attach;
379 hdlc->xmit = sca_xmit;
380 card->settings.clock_type = CLOCK_EXT;
381
382 result = register_hdlc_device(dev);
383 if (result) {
384 printk(KERN_WARNING "c101: unable to register hdlc device\n");
385 c101_destroy_card(card);
386 return result;
387 }
388
Krzysztof Hałasa88597362008-03-24 19:12:23 +0100389 sca_init_port(card); /* Set up C101 memory */
Krzysztof Halasac2ce9202006-07-12 13:46:12 -0700390 set_carrier(card);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391
392 printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
393 " using %u TX + %u RX packets rings\n",
394 dev->name, card->irq,
395 card->tx_ring_buffers, card->rx_ring_buffers);
396
397 *new_card = card;
398 new_card = &card->next_card;
399 return 0;
400}
401
402
403
404static int __init c101_init(void)
405{
406 if (hw == NULL) {
407#ifdef MODULE
408 printk(KERN_INFO "c101: no card initialized\n");
409#endif
Krzysztof Halasad753d822008-04-20 19:10:56 +0200410 return -EINVAL; /* no parameters specified, abort */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 }
412
413 printk(KERN_INFO "%s\n", version);
414
415 do {
416 unsigned long irq, ram;
417
418 irq = simple_strtoul(hw, &hw, 0);
419
420 if (*hw++ != ',')
421 break;
422 ram = simple_strtoul(hw, &hw, 0);
423
424 if (*hw == ':' || *hw == '\x0')
425 c101_run(irq, ram);
426
427 if (*hw == '\x0')
Krzysztof Halasad753d822008-04-20 19:10:56 +0200428 return first_card ? 0 : -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 }while(*hw++ == ':');
430
431 printk(KERN_ERR "c101: invalid hardware parameters\n");
Krzysztof Halasad753d822008-04-20 19:10:56 +0200432 return first_card ? 0 : -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433}
434
435
436static void __exit c101_cleanup(void)
437{
438 card_t *card = first_card;
439
440 while (card) {
441 card_t *ptr = card;
442 card = card->next_card;
443 unregister_hdlc_device(port_to_dev(ptr));
444 c101_destroy_card(ptr);
445 }
446}
447
448
449module_init(c101_init);
450module_exit(c101_cleanup);
451
452MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
453MODULE_DESCRIPTION("Moxa C101 serial port driver");
454MODULE_LICENSE("GPL v2");
Krzysztof Halasa41b1d172006-07-21 14:41:36 -0700455module_param(hw, charp, 0444);
456MODULE_PARM_DESC(hw, "irq,ram:irq,...");