blob: 084478e14d243bb4bea2fc8aeec0d26290544de8 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * This header file contains public constants and structures used by
3 * the scsi code for linux.
4 *
5 * For documentation on the OPCODES, MESSAGES, and SENSE values,
6 * please consult the SCSI standard.
7 */
8#ifndef _SCSI_SCSI_H
9#define _SCSI_SCSI_H
10
11#include <linux/types.h>
James Bottomleyf290f192009-02-08 21:59:48 -060012
13struct scsi_cmnd;
Linus Torvalds1da177e2005-04-16 15:20:36 -070014
15/*
James Bottomleyd3f46f32008-01-15 11:11:46 -060016 * The maximum number of SG segments that we will put inside a
17 * scatterlist (unless chaining is used). Should ideally fit inside a
18 * single page, to avoid a higher order allocation. We could define this
19 * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The
20 * minimum value is 32
21 */
22#define SCSI_MAX_SG_SEGMENTS 128
23
24/*
25 * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
26 * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
27 */
28#ifdef ARCH_HAS_SG_CHAIN
29#define SCSI_MAX_SG_CHAIN_SEGMENTS 2048
30#else
31#define SCSI_MAX_SG_CHAIN_SEGMENTS SCSI_MAX_SG_SEGMENTS
32#endif
33
34/*
Christoph Hellwige02f3f52006-01-13 19:04:00 +010035 * Special value for scanning to specify scanning or rescanning of all
36 * possible channels, (target) ids, or luns on a given shost.
37 */
38#define SCAN_WILD_CARD ~0
39
40/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 * SCSI opcodes
42 */
43
44#define TEST_UNIT_READY 0x00
45#define REZERO_UNIT 0x01
46#define REQUEST_SENSE 0x03
47#define FORMAT_UNIT 0x04
48#define READ_BLOCK_LIMITS 0x05
49#define REASSIGN_BLOCKS 0x07
Gerd Knorr daa6eda2005-05-10 10:59:13 +020050#define INITIALIZE_ELEMENT_STATUS 0x07
Linus Torvalds1da177e2005-04-16 15:20:36 -070051#define READ_6 0x08
52#define WRITE_6 0x0a
53#define SEEK_6 0x0b
54#define READ_REVERSE 0x0f
55#define WRITE_FILEMARKS 0x10
56#define SPACE 0x11
57#define INQUIRY 0x12
58#define RECOVER_BUFFERED_DATA 0x14
59#define MODE_SELECT 0x15
60#define RESERVE 0x16
61#define RELEASE 0x17
62#define COPY 0x18
63#define ERASE 0x19
64#define MODE_SENSE 0x1a
65#define START_STOP 0x1b
66#define RECEIVE_DIAGNOSTIC 0x1c
67#define SEND_DIAGNOSTIC 0x1d
68#define ALLOW_MEDIUM_REMOVAL 0x1e
69
70#define SET_WINDOW 0x24
71#define READ_CAPACITY 0x25
72#define READ_10 0x28
73#define WRITE_10 0x2a
74#define SEEK_10 0x2b
Gerd Knorr daa6eda2005-05-10 10:59:13 +020075#define POSITION_TO_ELEMENT 0x2b
Linus Torvalds1da177e2005-04-16 15:20:36 -070076#define WRITE_VERIFY 0x2e
77#define VERIFY 0x2f
78#define SEARCH_HIGH 0x30
79#define SEARCH_EQUAL 0x31
80#define SEARCH_LOW 0x32
81#define SET_LIMITS 0x33
82#define PRE_FETCH 0x34
83#define READ_POSITION 0x34
84#define SYNCHRONIZE_CACHE 0x35
85#define LOCK_UNLOCK_CACHE 0x36
86#define READ_DEFECT_DATA 0x37
87#define MEDIUM_SCAN 0x38
88#define COMPARE 0x39
89#define COPY_VERIFY 0x3a
90#define WRITE_BUFFER 0x3b
91#define READ_BUFFER 0x3c
92#define UPDATE_BLOCK 0x3d
93#define READ_LONG 0x3e
94#define WRITE_LONG 0x3f
95#define CHANGE_DEFINITION 0x40
96#define WRITE_SAME 0x41
97#define READ_TOC 0x43
98#define LOG_SELECT 0x4c
99#define LOG_SENSE 0x4d
FUJITA Tomonoric639d142008-01-23 01:32:01 +0900100#define XDWRITEREAD_10 0x53
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101#define MODE_SELECT_10 0x55
102#define RESERVE_10 0x56
103#define RELEASE_10 0x57
104#define MODE_SENSE_10 0x5a
105#define PERSISTENT_RESERVE_IN 0x5e
106#define PERSISTENT_RESERVE_OUT 0x5f
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300107#define VARIABLE_LENGTH_CMD 0x7f
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108#define REPORT_LUNS 0xa0
Hannes Reinecke5a09e392006-10-20 09:58:47 +0200109#define MAINTENANCE_IN 0xa3
Hannes Reinecke057ea7c2008-07-17 16:53:21 -0700110#define MAINTENANCE_OUT 0xa4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111#define MOVE_MEDIUM 0xa5
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200112#define EXCHANGE_MEDIUM 0xa6
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113#define READ_12 0xa8
114#define WRITE_12 0xaa
115#define WRITE_VERIFY_12 0xae
116#define SEARCH_HIGH_12 0xb0
117#define SEARCH_EQUAL_12 0xb1
118#define SEARCH_LOW_12 0xb2
119#define READ_ELEMENT_STATUS 0xb8
120#define SEND_VOLUME_TAG 0xb6
121#define WRITE_LONG_2 0xea
122#define READ_16 0x88
123#define WRITE_16 0x8a
124#define VERIFY_16 0x8f
125#define SERVICE_ACTION_IN 0x9e
126/* values for service action in */
127#define SAI_READ_CAPACITY_16 0x10
Hannes Reinecke5a09e392006-10-20 09:58:47 +0200128/* values for maintenance in */
129#define MI_REPORT_TARGET_PGS 0x0a
Hannes Reinecke057ea7c2008-07-17 16:53:21 -0700130/* values for maintenance out */
131#define MO_SET_TARGET_PGS 0x0a
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132
Jeff Garzikb0955182005-05-12 15:45:22 -0400133/* Values for T10/04-262r7 */
134#define ATA_16 0x85 /* 16-byte pass-thru */
135#define ATA_12 0xa1 /* 12-byte pass-thru */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136
137/*
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300138 * SCSI command lengths
139 */
140
141#define SCSI_MAX_VARLEN_CDB_SIZE 260
142
143/* defined in T10 SCSI Primary Commands-2 (SPC2) */
144struct scsi_varlen_cdb_hdr {
145 u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
146 u8 control;
147 u8 misc[5];
148 u8 additional_cdb_length; /* total cdb length - 8 */
149 __be16 service_action;
150 /* service specific data follows */
151};
152
153static inline unsigned
154scsi_varlen_cdb_length(const void *hdr)
155{
156 return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
157}
158
159extern const unsigned char scsi_command_size_tbl[8];
160#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
161
162static inline unsigned
163scsi_command_size(const unsigned char *cmnd)
164{
165 return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
166 scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
167}
168
169/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
171 * T10/1561-D Revision 4 Draft dated 7th November 2002.
172 */
173#define SAM_STAT_GOOD 0x00
174#define SAM_STAT_CHECK_CONDITION 0x02
175#define SAM_STAT_CONDITION_MET 0x04
176#define SAM_STAT_BUSY 0x08
177#define SAM_STAT_INTERMEDIATE 0x10
178#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
179#define SAM_STAT_RESERVATION_CONFLICT 0x18
180#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
181#define SAM_STAT_TASK_SET_FULL 0x28
182#define SAM_STAT_ACA_ACTIVE 0x30
183#define SAM_STAT_TASK_ABORTED 0x40
184
185/** scsi_status_is_good - check the status return.
186 *
187 * @status: the status passed up from the driver (including host and
188 * driver components)
189 *
190 * This returns true for known good conditions that may be treated as
191 * command completed normally
192 */
193static inline int scsi_status_is_good(int status)
194{
195 /*
196 * FIXME: bit0 is listed as reserved in SCSI-2, but is
197 * significant in SCSI-3. For now, we follow the SCSI-2
198 * behaviour and ignore reserved bits.
199 */
200 status &= 0xfe;
201 return ((status == SAM_STAT_GOOD) ||
202 (status == SAM_STAT_INTERMEDIATE) ||
203 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
204 /* FIXME: this is obsolete in SAM-3 */
205 (status == SAM_STAT_COMMAND_TERMINATED));
206}
207
208/*
209 * Status codes. These are deprecated as they are shifted 1 bit right
210 * from those found in the SCSI standards. This causes confusion for
211 * applications that are ported to several OSes. Prefer SAM Status codes
212 * above.
213 */
214
215#define GOOD 0x00
216#define CHECK_CONDITION 0x01
217#define CONDITION_GOOD 0x02
218#define BUSY 0x04
219#define INTERMEDIATE_GOOD 0x08
220#define INTERMEDIATE_C_GOOD 0x0a
221#define RESERVATION_CONFLICT 0x0c
222#define COMMAND_TERMINATED 0x11
223#define QUEUE_FULL 0x14
224#define ACA_ACTIVE 0x18
225#define TASK_ABORTED 0x20
226
227#define STATUS_MASK 0xfe
228
229/*
230 * SENSE KEYS
231 */
232
233#define NO_SENSE 0x00
234#define RECOVERED_ERROR 0x01
235#define NOT_READY 0x02
236#define MEDIUM_ERROR 0x03
237#define HARDWARE_ERROR 0x04
238#define ILLEGAL_REQUEST 0x05
239#define UNIT_ATTENTION 0x06
240#define DATA_PROTECT 0x07
241#define BLANK_CHECK 0x08
242#define COPY_ABORTED 0x0a
243#define ABORTED_COMMAND 0x0b
244#define VOLUME_OVERFLOW 0x0d
245#define MISCOMPARE 0x0e
246
247
248/*
249 * DEVICE TYPES
Michael Tokarevd7b8bcb2006-10-27 16:02:37 +0400250 * Please keep them in 0x%02x format for $MODALIAS to work
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 */
252
253#define TYPE_DISK 0x00
254#define TYPE_TAPE 0x01
255#define TYPE_PRINTER 0x02
256#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
257#define TYPE_WORM 0x04 /* Treated as ROM by our system */
258#define TYPE_ROM 0x05
259#define TYPE_SCANNER 0x06
260#define TYPE_MOD 0x07 /* Magneto-optical disk -
261 * - treated as TYPE_DISK */
262#define TYPE_MEDIUM_CHANGER 0x08
263#define TYPE_COMM 0x09 /* Communications device */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264#define TYPE_RAID 0x0c
James Bottomley7f602c52005-05-21 10:24:37 -0500265#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
Al Viro 631e8a12005-05-16 01:59:55 +0100266#define TYPE_RBC 0x0e
Boaz Harrosh82443a52009-01-25 16:51:33 +0200267#define TYPE_OSD 0x11
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268#define TYPE_NO_LUN 0x7f
269
James Bottomley89dddbc2008-02-03 15:32:59 -0600270/* SCSI protocols; these are taken from SPC-3 section 7.5 */
271enum scsi_protocol {
272 SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
273 SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
274 SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
275 SCSI_PROTOCOL_SBP = 3, /* firewire */
276 SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
277 SCSI_PROTOCOL_ISCSI = 5,
278 SCSI_PROTOCOL_SAS = 6,
279 SCSI_PROTOCOL_ADT = 7, /* Media Changers */
280 SCSI_PROTOCOL_ATA = 8,
281 SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
282};
283
Matthew Wilcox4ff36712006-07-04 12:15:20 -0600284/* Returns a human-readable name for the device */
285extern const char * scsi_device_type(unsigned type);
286
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287/*
288 * standard mode-select header prepended to all mode-select commands
289 */
290
291struct ccs_modesel_head {
292 __u8 _r1; /* reserved */
293 __u8 medium; /* device-specific medium type */
294 __u8 _r2; /* reserved */
295 __u8 block_desc_length; /* block descriptor length */
296 __u8 density; /* device-specific density code */
297 __u8 number_blocks_hi; /* number of blocks in this block desc */
298 __u8 number_blocks_med;
299 __u8 number_blocks_lo;
300 __u8 _r3;
301 __u8 block_length_hi; /* block length for blocks in this desc */
302 __u8 block_length_med;
303 __u8 block_length_lo;
304};
305
306/*
307 * ScsiLun: 8 byte LUN.
308 */
309struct scsi_lun {
310 __u8 scsi_lun[8];
311};
312
313/*
James Bottomley01b291b2008-08-21 15:14:14 -0500314 * The Well Known LUNS (SAM-3) in our int representation of a LUN
315 */
316#define SCSI_W_LUN_BASE 0xc100
317#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
318#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
319#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
320
321static inline int scsi_is_wlun(unsigned int lun)
322{
323 return (lun & 0xff00) == SCSI_W_LUN_BASE;
324}
325
326
327/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328 * MESSAGE CODES
329 */
330
331#define COMMAND_COMPLETE 0x00
332#define EXTENDED_MESSAGE 0x01
333#define EXTENDED_MODIFY_DATA_POINTER 0x00
334#define EXTENDED_SDTR 0x01
335#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
336#define EXTENDED_WDTR 0x03
337#define EXTENDED_PPR 0x04
338#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
339#define SAVE_POINTERS 0x02
340#define RESTORE_POINTERS 0x03
341#define DISCONNECT 0x04
342#define INITIATOR_ERROR 0x05
343#define ABORT_TASK_SET 0x06
344#define MESSAGE_REJECT 0x07
345#define NOP 0x08
346#define MSG_PARITY_ERROR 0x09
347#define LINKED_CMD_COMPLETE 0x0a
348#define LINKED_FLG_CMD_COMPLETE 0x0b
349#define TARGET_RESET 0x0c
350#define ABORT_TASK 0x0d
351#define CLEAR_TASK_SET 0x0e
352#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
353#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
354#define CLEAR_ACA 0x16
355#define LOGICAL_UNIT_RESET 0x17
356#define SIMPLE_QUEUE_TAG 0x20
357#define HEAD_OF_QUEUE_TAG 0x21
358#define ORDERED_QUEUE_TAG 0x22
359#define IGNORE_WIDE_RESIDUE 0x23
360#define ACA 0x24
361#define QAS_REQUEST 0x55
362
363/* Old SCSI2 names, don't use in new code */
364#define BUS_DEVICE_RESET TARGET_RESET
365#define ABORT ABORT_TASK_SET
366
367/*
368 * Host byte codes
369 */
370
371#define DID_OK 0x00 /* NO error */
372#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
373#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
374#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
375#define DID_BAD_TARGET 0x04 /* BAD target. */
376#define DID_ABORT 0x05 /* Told to abort for some other reason */
377#define DID_PARITY 0x06 /* Parity error */
378#define DID_ERROR 0x07 /* Internal error */
379#define DID_RESET 0x08 /* Reset by somebody. */
380#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
381#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
382#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
383#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
bf341912005-04-12 17:49:09 -0500384#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
385 * without decrementing the retry count */
Mike Christiea4dfaa62008-08-19 18:45:25 -0500386#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
387 * and the driver blocked the port to
388 * recover the link. Transport class will
389 * retry or fail IO */
390#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391#define DRIVER_OK 0x00 /* Driver status */
392
393/*
394 * These indicate the error that occurred, and what is available.
395 */
396
397#define DRIVER_BUSY 0x01
398#define DRIVER_SOFT 0x02
399#define DRIVER_MEDIA 0x03
400#define DRIVER_ERROR 0x04
401
402#define DRIVER_INVALID 0x05
403#define DRIVER_TIMEOUT 0x06
404#define DRIVER_HARD 0x07
405#define DRIVER_SENSE 0x08
406
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407/*
408 * Internal return values.
409 */
410
411#define NEEDS_RETRY 0x2001
412#define SUCCESS 0x2002
413#define FAILED 0x2003
414#define QUEUED 0x2004
415#define SOFT_ERROR 0x2005
416#define ADD_TO_MLQUEUE 0x2006
417#define TIMEOUT_ERROR 0x2007
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -0700418#define SCSI_RETURN_NOT_HANDLED 0x2008
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419
420/*
421 * Midlevel queue return values.
422 */
423#define SCSI_MLQUEUE_HOST_BUSY 0x1055
424#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
425#define SCSI_MLQUEUE_EH_RETRY 0x1057
Mike Christief0c0a372008-08-17 15:24:38 -0500426#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427
428/*
429 * Use these to separate status msg and our bytes
430 *
431 * These are set by:
432 *
433 * status byte = set from target device
434 * msg_byte = return status from host adapter itself.
435 * host_byte = set by low-level driver to indicate status.
436 * driver_byte = set by mid-level.
437 */
438#define status_byte(result) (((result) >> 1) & 0x7f)
439#define msg_byte(result) (((result) >> 8) & 0xff)
440#define host_byte(result) (((result) >> 16) & 0xff)
441#define driver_byte(result) (((result) >> 24) & 0xff)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442
443#define sense_class(sense) (((sense) >> 4) & 0x7)
444#define sense_error(sense) ((sense) & 0xf)
445#define sense_valid(sense) ((sense) & 0x80);
446
b6651122005-04-03 14:52:44 -0500447/*
448 * default timeouts
449*/
450#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
451#define START_STOP_TIMEOUT (60 * HZ)
452#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
453#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
454#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
455
Linus Torvalds1da177e2005-04-16 15:20:36 -0700456
457#define IDENTIFY_BASE 0x80
458#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
459 ((can_disconnect) ? 0x40 : 0) |\
460 ((lun) & 0x07))
461
462/*
463 * struct scsi_device::scsi_level values. For SCSI devices other than those
464 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
465 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
466 * variable is visible to the user via sysfs.
467 */
468
469#define SCSI_UNKNOWN 0
470#define SCSI_1 1
471#define SCSI_1_CCS 2
472#define SCSI_2 3
473#define SCSI_3 4 /* SPC */
474#define SCSI_SPC_2 5
475#define SCSI_SPC_3 6
476
477/*
478 * INQ PERIPHERAL QUALIFIERS
479 */
480#define SCSI_INQ_PQ_CON 0x00
481#define SCSI_INQ_PQ_NOT_CON 0x01
482#define SCSI_INQ_PQ_NOT_CAP 0x03
483
484
485/*
486 * Here are some scsi specific ioctl commands which are sometimes useful.
487 *
488 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
489 */
490
491/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
492#define SCSI_IOCTL_GET_IDLUN 0x5382
493
494/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
495
496/* Used to obtain the host number of a device. */
497#define SCSI_IOCTL_PROBE_HOST 0x5385
498
499/* Used to obtain the bus number for a device */
500#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
501
502/* Used to obtain the PCI location of a device */
503#define SCSI_IOCTL_GET_PCI 0x5387
504
James Bottomley2908d772006-08-29 09:22:51 -0500505/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
FUJITA Tomonori4a531e82006-10-20 09:08:18 +0900506static inline __u32 scsi_to_u32(__u8 *ptr)
James Bottomley2908d772006-08-29 09:22:51 -0500507{
508 return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
509}
510
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511#endif /* _SCSI_SCSI_H */