Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 4630b130b30be6420394ba31121e111c8771ca08 / . / drivers / mfd / Kconfig
blob: c6edba69678aad8aab6b5fef9d3720d28d9b900a [file] [log] [blame]
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]1#
2# Multifunction miscellaneous devices
3#
4
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]5if HAS_IOMEM
6menu "Multifunction device drivers"
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]7
Dmitry Baryshkovaa613de2008-06-27 10:37:19 +0100[diff] [blame]8config MFD_CORE
9 tristate
10 default n
11
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]12config MFD_88PM860X
13 bool "Support Marvell 88PM8606/88PM8607"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]14 depends on I2C=y && GENERIC_HARDIRQS
Jett.Zhoub46a36c2011-11-11 15:38:27 +0800[diff] [blame]15 select REGMAP_I2C
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]16 select MFD_CORE
17 help
18 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
19 This includes the I2C driver and the core APIs _only_, you have to
20 select individual components like voltage regulators, RTC and
21 battery-charger under the corresponding menus.
22
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]23config MFD_SM501
24 tristate "Support for Silicon Motion SM501"
25 ---help---
26 This is the core driver for the Silicon Motion SM501 multimedia
27 companion chip. This device is a multifunction device which may
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200[diff] [blame]28 provide numerous interfaces including USB host controller, USB gadget,
29 asynchronous serial ports, audio functions, and a dual display video
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]30 interface. The device may be connected by PCI or local bus with
31 varying functions enabled.
32
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]33config MFD_SM501_GPIO
34 bool "Export GPIO via GPIO layer"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]35 depends on MFD_SM501 && GPIOLIB
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]36 ---help---
37 This option uses the gpio library layer to export the 64 GPIO
38 lines on the SM501. The platform data is used to supply the
39 base number for the first GPIO line to register.
40
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]41config MFD_ASIC3
42 bool "Support for Compaq ASIC3"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]43 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel9461f652009-06-15 12:10:24 +0200[diff] [blame]44 select MFD_CORE
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]45 ---help---
46 This driver supports the ASIC3 multifunction chip found on many
47 PDAs (mainly iPAQ and HTC based ones)
48
Miguel Aguilarca263082010-03-11 09:32:21 -0600[diff] [blame]49config MFD_DAVINCI_VOICECODEC
50 tristate
51 select MFD_CORE
52
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]53config MFD_DM355EVM_MSP
54 bool "DaVinci DM355 EVM microcontroller"
Samuel Ortiz1819ebc2010-09-20 00:19:27 +0200[diff] [blame]55 depends on I2C=y && MACH_DAVINCI_DM355_EVM
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]56 help
57 This driver supports the MSP430 microcontroller used on these
58 boards. MSP430 firmware manages resets and power sequencing,
59 inputs from buttons and the IR remote, LEDs, an RTC, and more.
60
Cyril Chemparathy03df0f62011-01-18 19:21:35 +0000[diff] [blame]61config MFD_TI_SSP
62 tristate "TI Sequencer Serial Port support"
63 depends on ARCH_DAVINCI_TNETV107X
64 select MFD_CORE
65 ---help---
66 Say Y here if you want support for the Sequencer Serial Port
67 in a Texas Instruments TNETV107X SoC.
68
69 To compile this driver as a module, choose M here: the
70 module will be called ti-ssp.
71
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]72config HTC_EGPIO
73 bool "HTC EGPIO support"
Michael Buesch7444a722008-07-25 01:46:11 -0700[diff] [blame]74 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]75 help
76 This driver supports the CPLD egpio chip present on
77 several HTC phones. It provides basic support for input
78 pins, output pins, and irqs.
79
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]80config HTC_PASIC3
81 tristate "HTC PASIC3 LED/DS1WM chip support"
Philipp Zabel0254a8f2009-02-17 10:06:45 +0100[diff] [blame]82 select MFD_CORE
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]83 help
84 This core driver provides register access for the LED/DS1WM
85 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
86 HTC Magician devices, respectively. Actual functionality is
87 handled by the leds-pasic3 and ds1wm drivers.
88
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]89config HTC_I2CPLD
90 bool "HTC I2C PLD chip support"
Randy Dunlapbef3e202010-01-20 19:55:34 -0800[diff] [blame]91 depends on I2C=y && GPIOLIB
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]92 help
93 If you say yes here you get support for the supposed CPLD
94 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
95 This device provides input and output GPIOs through an I2C
96 interface to one or more sub-chips.
97
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]98config UCB1400_CORE
99 tristate "Philips UCB1400 Core driver"
Randy Dunlape4831802008-10-15 13:29:07 +0200[diff] [blame]100 depends on AC97_BUS
Andrew Morton5a49a542008-10-15 13:30:47 +0200[diff] [blame]101 depends on GPIOLIB
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]102 help
103 This enables support for the Philips UCB1400 core functions.
104 The UCB1400 is an AC97 audio codec.
105
106 To compile this driver as a module, choose M here: the
107 module will be called ucb1400_core.
108
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]109config TPS6105X
110 tristate "TPS61050/61052 Boost Converters"
111 depends on I2C
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]112 select REGULATOR
Guenter Roeckfc498fa2011-03-24 12:12:47 -0700[diff] [blame]113 select MFD_CORE
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]114 select REGULATOR_FIXED_VOLTAGE
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]115 help
116 This option enables a driver for the TP61050/TPS61052
117 high-power "white LED driver". This boost converter is
118 sometimes used for other things than white LEDs, and
119 also contains a GPIO pin.
120
David Brownell87c13492008-12-22 12:16:27 +0100[diff] [blame]121config TPS65010
122 tristate "TPS6501x Power Management chips"
123 depends on I2C && GPIOLIB
124 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
125 help
126 If you say yes here you get support for the TPS6501x series of
127 Power Management chips. These include voltage regulators,
128 lithium ion/polymer battery charging, and other features that
129 are often used in portable devices like cell phones and cameras.
130
131 This driver can also be built as a module. If so, the module
132 will be called tps65010.
133
Todd Fischer31dd6a22010-04-08 09:04:55 +0200[diff] [blame]134config TPS6507X
135 tristate "TPS6507x Power Management / Touch Screen chips"
136 select MFD_CORE
137 depends on I2C
138 help
139 If you say yes here you get support for the TPS6507x series of
140 Power Management / Touch Screen chips. These include voltage
141 regulators, lithium ion/polymer battery charging, touch screen
142 and other features that are often used in portable devices.
143 This driver can also be built as a module. If so, the module
144 will be called tps6507x.
145
AnilKumar Chd48f4112012-01-11 16:11:41 +0530[diff] [blame]146config MFD_TPS65217
147 tristate "TPS65217 Power Management / White LED chips"
148 depends on I2C
149 select MFD_CORE
150 select REGMAP_I2C
151 help
152 If you say yes here you get support for the TPS65217 series of
153 Power Management / White LED chips.
154 These include voltage regulators, lithium ion/polymer battery
155 charger, wled and other features that are often used in portable
156 devices.
157
158 This driver can also be built as a module. If so, the module
159 will be called tps65217.
160
Axel Lin37df0032011-04-15 20:04:45 +0800[diff] [blame]161config MFD_TPS6586X
162 bool "TPS6586x Power Management chips"
163 depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
164 select MFD_CORE
165 help
166 If you say yes here you get support for the TPS6586X series of
167 Power Management chips.
168 This driver provides common support for accessing the device,
169 additional drivers must be enabled in order to use the
170 functionality of the device.
171
172 This driver can also be built as a module. If so, the module
173 will be called tps6586x.
174
Linus Walleij54f323b2011-07-04 17:34:16 +0200[diff] [blame]175config MFD_TPS65910
176 bool "TPS65910 Power Management chip"
177 depends on I2C=y && GPIOLIB
178 select MFD_CORE
179 select GPIO_TPS65910
Laxman Dewangandc9913a2012-02-21 18:21:34 +0530[diff] [blame]180 select REGMAP_I2C
Linus Walleij54f323b2011-07-04 17:34:16 +0200[diff] [blame]181 help
182 if you say yes here you get support for the TPS65910 series of
183 Power Management chips.
184
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]185config MFD_TPS65912
Mark Brown56088012011-06-22 14:53:58 +0100[diff] [blame]186 bool
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]187 depends on GPIOLIB
188
189config MFD_TPS65912_I2C
Axel Lin231dd9c2012-02-15 16:05:24 +0800[diff] [blame]190 bool "TPS65912 Power Management chip with I2C"
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]191 select MFD_CORE
192 select MFD_TPS65912
193 depends on I2C=y && GPIOLIB
194 help
195 If you say yes here you get support for the TPS65912 series of
196 PM chips with I2C interface.
197
198config MFD_TPS65912_SPI
199 bool "TPS65912 Power Management chip with SPI"
200 select MFD_CORE
201 select MFD_TPS65912
202 depends on SPI_MASTER && GPIOLIB
203 help
204 If you say yes here you get support for the TPS65912 series of
205 PM chips with SPI interface.
206
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]207config MENELAUS
208 bool "Texas Instruments TWL92330/Menelaus PM chip"
Tony Lindgren088ef952010-02-12 12:26:47 -0800[diff] [blame]209 depends on I2C=y && ARCH_OMAP2
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]210 help
211 If you say yes here you get support for the Texas Instruments
212 TWL92330/Menelaus Power Management chip. This include voltage
Matt LaPlante692105b2009-01-26 11:12:25 +0100[diff] [blame]213 regulators, Dual slot memory card transceivers, real-time clock
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]214 and other features that are often used in portable devices like
215 cell phones and PDAs.
216
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]217config TWL4030_CORE
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]218 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
Russell King62525472012-02-07 09:47:21 +0000[diff] [blame]219 depends on I2C=y && GENERIC_HARDIRQS
Grant Likely280ad7f2012-02-24 14:58:54 -0700[diff] [blame]220 select IRQ_DOMAIN
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]221 help
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]222 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]223 This core driver provides register access and IRQ handling
224 facilities, and registers devices for the various functions
225 so that function-specific drivers can bind to them.
226
227 These multi-function chips are found on many OMAP2 and OMAP3
228 boards, providing power management, RTC, GPIO, keypad, a
229 high speed USB OTG transceiver, an audio codec (on most
230 versions) and many other features.
231
Keerthyf99c1d42011-03-01 19:12:26 +0530[diff] [blame]232config TWL4030_MADC
233 tristate "Texas Instruments TWL4030 MADC"
234 depends on TWL4030_CORE
235 help
236 This driver provides support for triton TWL4030-MADC. The
237 driver supports both RT and SW conversion methods.
238
239 This driver can be built as a module. If so it will be
240 named twl4030-madc
241
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]242config TWL4030_POWER
243 bool "Support power resources on TWL4030 family chips"
244 depends on TWL4030_CORE && ARM
245 help
246 Say yes here if you want to use the power resources on the
247 TWL4030 family chips. Most of these resources are regulators,
248 which have a separate driver; some are control signals, such
249 as clock request handshaking.
250
251 This driver uses board-specific data to initialize the resources
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300[diff] [blame]252 and load scripts controlling which resources are switched off/on
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]253 or reset when a sleep, wakeup or warm reset event occurs.
254
Peter Ujfalusi57fe7252011-05-31 12:02:49 +0300[diff] [blame]255config MFD_TWL4030_AUDIO
Peter Ujfalusi0b83dde2009-10-22 13:26:45 +0300[diff] [blame]256 bool
257 depends on TWL4030_CORE
258 select MFD_CORE
259 default n
260
Hemanth V31fc03d2010-07-14 12:04:56 +0200[diff] [blame]261config TWL6030_PWM
262 tristate "TWL6030 PWM (Pulse Width Modulator) Support"
263 depends on TWL4030_CORE
264 select HAVE_PWM
265 default n
266 help
267 Say yes here if you want support for TWL6030 PWM.
268 This is used to control charging LED brightness.
269
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]270config TWL6040_CORE
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]271 bool "Support for TWL6040 audio codec"
272 depends on I2C=y && GENERIC_HARDIRQS
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]273 select MFD_CORE
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]274 select REGMAP_I2C
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]275 default n
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]276 help
277 Say yes here if you want support for Texas Instruments TWL6040 audio
278 codec.
279 This driver provides common support for accessing the device,
280 additional drivers must be enabled in order to use the
281 functionality of the device (audio, vibra).
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]282
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]283config MFD_STMPE
284 bool "Support STMicroelectronics STMPE"
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]285 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]286 select MFD_CORE
287 help
288 Support for the STMPE family of I/O Expanders from
289 STMicroelectronics.
290
291 Currently supported devices are:
292
293 STMPE811: GPIO, Touchscreen
294 STMPE1601: GPIO, Keypad
295 STMPE2401: GPIO, Keypad
296 STMPE2403: GPIO, Keypad
297
298 This driver provides common support for accessing the device,
299 additional drivers must be enabled in order to use the functionality
300 of the device. Currently available sub drivers are:
301
302 GPIO: stmpe-gpio
303 Keypad: stmpe-keypad
304 Touchscreen: stmpe-ts
305
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]306menu "STMPE Interface Drivers"
307depends on MFD_STMPE
308
309config STMPE_I2C
310 bool "STMPE I2C Inteface"
Samuel Ortizeedea802011-12-20 18:28:19 +0100[diff] [blame]311 depends on I2C=y
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]312 default y
313 help
314 This is used to enable I2C interface of STMPE
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]315
316config STMPE_SPI
317 bool "STMPE SPI Inteface"
318 depends on SPI_MASTER
319 help
320 This is used to enable SPI interface of STMPE
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]321endmenu
322
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]323config MFD_TC3589X
324 bool "Support Toshiba TC35892 and variants"
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]325 depends on I2C=y && GENERIC_HARDIRQS
326 select MFD_CORE
327 help
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]328 Support for the Toshiba TC35892 and variants I/O Expander.
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]329
330 This driver provides common support for accessing the device,
331 additional drivers must be enabled in order to use the
332 functionality of the device.
333
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]334config MFD_TMIO
335 bool
336 default n
337
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]338config MFD_T7L66XB
339 bool "Support Toshiba T7L66XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]340 depends on ARM && HAVE_CLK
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]341 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]342 select MFD_TMIO
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]343 help
344 Support for Toshiba Mobile IO Controller T7L66XB
345
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]346config MFD_TC6387XB
347 bool "Support Toshiba TC6387XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]348 depends on ARM && HAVE_CLK
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]349 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]350 select MFD_TMIO
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]351 help
352 Support for Toshiba Mobile IO Controller TC6387XB
353
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]354config MFD_TC6393XB
355 bool "Support Toshiba TC6393XB"
Christoph Fritze959da12011-11-29 19:38:38 +0100[diff] [blame]356 depends on GPIOLIB && ARM && HAVE_CLK
Dmitry Baryshkovf024ff12008-06-27 10:37:57 +0100[diff] [blame]357 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]358 select MFD_TMIO
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]359 help
360 Support for Toshiba Mobile IO Controller TC6393XB
361
Samuel Ortiz8e2eaab2008-10-24 17:10:05 +0200[diff] [blame]362config PMIC_DA903X
363 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
364 depends on I2C=y
365 help
366 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
367 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
368 usually found on PXA processors-based platforms. This includes
369 the I2C driver and the core APIs _only_, you have to select
370 individual components like LCD backlight, voltage regulators,
371 LEDs and battery-charger under the corresponding menus.
372
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]373config PMIC_DA9052
374 bool
375 select MFD_CORE
376
Ashish Jangamcfe04472011-12-12 20:37:41 +0530[diff] [blame]377config MFD_DA9052_SPI
378 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
379 select REGMAP_SPI
380 select REGMAP_IRQ
381 select PMIC_DA9052
382 depends on SPI_MASTER=y
383 help
384 Support for the Dialog Semiconductor DA9052 PMIC
385 when controlled using SPI. This driver provides common support
386 for accessing the device, additional drivers must be enabled in
387 order to use the functionality of the device.
388
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]389config MFD_DA9052_I2C
390 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
391 select REGMAP_I2C
392 select REGMAP_IRQ
393 select PMIC_DA9052
394 depends on I2C=y
395 help
396 Support for the Dialog Semiconductor DA9052 PMIC
397 when controlled using I2C. This driver provides common support
398 for accessing the device, additional drivers must be enabled in
399 order to use the functionality of the device.
400
Michael Hennericha5736e02009-10-12 17:22:38 +0200[diff] [blame]401config PMIC_ADP5520
402 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
403 depends on I2C=y
404 help
405 Say yes here to add support for Analog Devices AD5520 and ADP5501,
406 Multifunction Power Management IC. This includes
407 the I2C driver and the core APIs _only_, you have to select
408 individual components like LCD backlight, LEDs, GPIOs and Kepad
409 under the corresponding menus.
410
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]411config MFD_MAX8925
Haojian Zhuang1f1cf8f2010-02-05 16:07:54 +0100[diff] [blame]412 bool "Maxim Semiconductor MAX8925 PMIC Support"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]413 depends on I2C=y && GENERIC_HARDIRQS
Haojian Zhuang1ad99892010-01-08 12:43:29 -0500[diff] [blame]414 select MFD_CORE
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]415 help
416 Say yes here to support for Maxim Semiconductor MAX8925. This is
417 a Power Management IC. This driver provies common support for
418 accessing the device, additional drivers must be enabled in order
419 to use the functionality of the device.
420
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]421config MFD_MAX8997
422 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
423 depends on I2C=y && GENERIC_HARDIRQS
424 select MFD_CORE
425 help
Axel Lin5a924d12012-03-01 09:31:25 +0800[diff] [blame]426 Say yes here to support for Maxim Semiconductor MAX8997/8966.
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]427 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
428 MUIC controls on chip.
Randy Dunlapd7e8c012011-03-14 11:28:37 +0100[diff] [blame]429 This driver provides common support for accessing the device;
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]430 additional drivers must be enabled in order to use the functionality
431 of the device.
432
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]433config MFD_MAX8998
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]434 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
Joonyoung Shim2c7e6f52010-09-10 18:36:39 +0200[diff] [blame]435 depends on I2C=y && GENERIC_HARDIRQS
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]436 select MFD_CORE
437 help
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]438 Say yes here to support for Maxim Semiconductor MAX8998 and
439 National Semiconductor LP3974. This is a Power Management IC.
440 This driver provies common support for accessing the device,
441 additional drivers must be enabled in order to use the functionality
442 of the device.
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]443
Sangbeom Kimc3d4d692012-01-09 00:09:09 +0100[diff] [blame]444config MFD_S5M_CORE
445 bool "SAMSUNG S5M Series Support"
446 depends on I2C=y && GENERIC_HARDIRQS
447 select MFD_CORE
448 select REGMAP_I2C
449 help
450 Support for the Samsung Electronics S5M MFD series.
451 This driver provies common support for accessing the device,
452 additional drivers must be enabled in order to use the functionality
453 of the device
454
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]455config MFD_WM8400
456 tristate "Support Wolfson Microelectronics WM8400"
Mark Brownb8380c12008-12-18 10:54:22 +0100[diff] [blame]457 select MFD_CORE
Mark Brown9c366452008-10-24 17:16:11 +0200[diff] [blame]458 depends on I2C
Mark Brown2b247d02011-08-23 18:56:19 +0100[diff] [blame]459 select REGMAP_I2C
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]460 help
461 Support for the Wolfson Microelecronics WM8400 PMIC and audio
Mark Brown9e5aca52009-05-29 11:34:18 +0100[diff] [blame]462 CODEC. This driver provides common support for accessing
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]463 the device, additional drivers must be enabled in order to use
464 the functionality of the device.
465
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]466config MFD_WM831X
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]467 bool
468 depends on GENERIC_HARDIRQS
469
470config MFD_WM831X_I2C
471 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]472 select MFD_CORE
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]473 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]474 select REGMAP_I2C
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]475 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]476 help
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]477 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
478 when controlled using I2C. This driver provides common support
479 for accessing the device, additional drivers must be enabled in
480 order to use the functionality of the device.
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]481
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]482config MFD_WM831X_SPI
483 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
484 select MFD_CORE
485 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]486 select REGMAP_SPI
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]487 depends on SPI_MASTER && GENERIC_HARDIRQS
488 help
489 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
490 when controlled using SPI. This driver provides common support
491 for accessing the device, additional drivers must be enabled in
492 order to use the functionality of the device.
493
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]494config MFD_WM8350
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]495 bool
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]496 depends on GENERIC_HARDIRQS
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]497
498config MFD_WM8350_CONFIG_MODE_0
499 bool
500 depends on MFD_WM8350
501
502config MFD_WM8350_CONFIG_MODE_1
503 bool
504 depends on MFD_WM8350
505
506config MFD_WM8350_CONFIG_MODE_2
507 bool
508 depends on MFD_WM8350
509
510config MFD_WM8350_CONFIG_MODE_3
511 bool
512 depends on MFD_WM8350
513
Mark Brownca23f8c2008-12-18 23:12:28 +0100[diff] [blame]514config MFD_WM8351_CONFIG_MODE_0
515 bool
516 depends on MFD_WM8350
517
518config MFD_WM8351_CONFIG_MODE_1
519 bool
520 depends on MFD_WM8350
521
522config MFD_WM8351_CONFIG_MODE_2
523 bool
524 depends on MFD_WM8350
525
526config MFD_WM8351_CONFIG_MODE_3
527 bool
528 depends on MFD_WM8350
529
Mark Brown96920632008-12-18 23:09:50 +0100[diff] [blame]530config MFD_WM8352_CONFIG_MODE_0
531 bool
532 depends on MFD_WM8350
533
534config MFD_WM8352_CONFIG_MODE_1
535 bool
536 depends on MFD_WM8350
537
538config MFD_WM8352_CONFIG_MODE_2
539 bool
540 depends on MFD_WM8350
541
542config MFD_WM8352_CONFIG_MODE_3
543 bool
544 depends on MFD_WM8350
545
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]546config MFD_WM8350_I2C
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]547 bool "Support Wolfson Microelectronics WM8350 with I2C"
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]548 select MFD_WM8350
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]549 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]550 help
551 The WM8350 is an integrated audio and power management
552 subsystem with watchdog and RTC functionality for embedded
553 systems. This option enables core support for the WM8350 with
554 I2C as the control interface. Additional options must be
555 selected to enable support for the functionality of the chip.
556
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]557config MFD_WM8994
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]558 bool "Support Wolfson Microelectronics WM8994"
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]559 select MFD_CORE
Mark Brownd6c645fc2011-06-17 13:02:27 +0100[diff] [blame]560 select REGMAP_I2C
Mark Brown8ab30692011-10-25 10:19:04 +0200[diff] [blame]561 select REGMAP_IRQ
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]562 depends on I2C=y && GENERIC_HARDIRQS
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]563 help
564 The WM8994 is a highly integrated hi-fi CODEC designed for
565 smartphone applicatiosn. As well as audio functionality it
566 has on board GPIO and regulator functionality which is
567 supported via the relevant subsystems. This driver provides
568 core support for the WM8994, in order to use the actual
569 functionaltiy of the device other drivers must be enabled.
570
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]571config MFD_PCF50633
572 tristate "Support for NXP PCF50633"
573 depends on I2C
Mark Brown6e3ad112011-08-08 17:04:40 +0900[diff] [blame]574 select REGMAP_I2C
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]575 help
576 Say yes here if you have NXP PCF50633 chip on your board.
577 This core driver provides register access and IRQ handling
578 facilities, and registers devices for the various functions
579 so that function-specific drivers can bind to them.
580
Axel Lin13051342011-04-15 20:06:37 +0800[diff] [blame]581config PCF50633_ADC
582 tristate "Support for NXP PCF50633 ADC"
583 depends on MFD_PCF50633
584 help
585 Say yes here if you want to include support for ADC in the
586 NXP PCF50633 chip.
587
588config PCF50633_GPIO
589 tristate "Support for NXP PCF50633 GPIO"
590 depends on MFD_PCF50633
591 help
592 Say yes here if you want to include support GPIO for pins on
593 the PCF50633 chip.
594
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]595config MFD_MC13783
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]596 tristate
597
598config MFD_MC13XXX
599 tristate "Support Freescale MC13783 and MC13892"
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]600 depends on SPI_MASTER
601 select MFD_CORE
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]602 select MFD_MC13783
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]603 help
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]604 Support for the Freescale (Atlas) PMIC and audio CODECs
605 MC13783 and MC13892.
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]606 This driver provides common support for accessing the device,
607 additional drivers must be enabled in order to use the
608 functionality of the device.
609
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]610config ABX500_CORE
611 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
Mattias Wallin47c16972010-09-10 17:47:56 +0200[diff] [blame]612 default y if ARCH_U300 || ARCH_U8500
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]613 help
614 Say yes here if you have the ABX500 Mixed Signal IC family
615 chips. This core driver expose register access functions.
616 Functionality specific drivers using these functions can
617 remain unchanged when IC changes. Binding of the functions to
618 actual register access is done by the IC core driver.
619
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]620config AB3100_CORE
Linus Walleij2071db42010-01-19 11:41:52 +0100[diff] [blame]621 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]622 depends on I2C=y && ABX500_CORE
Linus Walleij8c96aef2010-08-20 10:27:12 +0200[diff] [blame]623 select MFD_CORE
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]624 default y if ARCH_U300
625 help
626 Select this to enable the AB3100 Mixed Signal IC core
627 functionality. This connects to a AB3100 on the I2C bus
628 and expose a number of symbols needed for dependent devices
629 to read and write registers and subscribe to events from
630 this multi-functional IC. This is needed to use other features
631 of the AB3100 such as battery-backed RTC, charging control,
632 LEDs, vibrator, system power and temperature, power management
633 and ALSA sound.
634
Linus Walleij12992dd2009-08-18 22:52:26 +0200[diff] [blame]635config AB3100_OTP
636 tristate "ST-Ericsson AB3100 OTP functions"
637 depends on AB3100_CORE
638 default y if AB3100_CORE
639 help
640 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
641 programmable memory) support. This exposes a sysfs file to read
642 out OTP values.
643
Daniel Ribeiro13a09f92009-05-28 15:43:37 -0300[diff] [blame]644config EZX_PCAP
645 bool "PCAP Support"
646 depends on GENERIC_HARDIRQS && SPI_MASTER
647 help
648 This enables the PCAP ASIC present on EZX Phones. This is
649 needed for MMC, TouchScreen, Sound, USB, etc..
650
Mattias Wallin3d5e2ca2011-09-22 08:22:18 +0200[diff] [blame]651config AB5500_CORE
652 bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
653 depends on ABX500_CORE && MFD_DB5500_PRCMU
654 select MFD_CORE
655 help
656 Select this option to enable access to AB5500 power management
657 chip. This connects to the db5500 chip via the I2C bus via PRCMU.
658 This chip embeds various other multimedia funtionalities as well.
659
Linus Walleij94be70d2011-09-22 08:22:33 +0200[diff] [blame]660config AB5500_DEBUG
661 bool "Enable debug info via debugfs"
662 depends on AB5500_CORE && DEBUG_FS
663 default y if DEBUG_FS
664 help
665 Select this option if you want debug information from the AB5500
666 using the debug filesystem, debugfs.
667
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]668config AB8500_CORE
669 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]670 depends on GENERIC_HARDIRQS && ABX500_CORE
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]671 select MFD_CORE
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]672 help
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]673 Select this option to enable access to AB8500 power management
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]674 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
675 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
676 the irq_chip parts for handling the Mixed Signal chip events.
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]677 This chip embeds various other multimedia funtionalities as well.
678
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]679config AB8500_I2C_CORE
680 bool "AB8500 register access via PRCMU I2C"
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]681 depends on AB8500_CORE && MFD_DB8500_PRCMU
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]682 default y
683 help
684 This enables register access to the AB8500 chip via PRCMU I2C.
685 The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
686 the I2C bus is connected to the Power Reset
687 and Mangagement Unit, PRCMU.
688
Mattias Wallin5814fc32010-09-13 16:05:04 +0200[diff] [blame]689config AB8500_DEBUG
690 bool "Enable debug info via debugfs"
691 depends on AB8500_CORE && DEBUG_FS
692 default y if DEBUG_FS
693 help
694 Select this option if you want debug information using the debug
695 filesystem, debugfs.
696
Arun Murthydae2db32011-02-22 10:11:13 +0100[diff] [blame]697config AB8500_GPADC
698 bool "AB8500 GPADC driver"
699 depends on AB8500_CORE && REGULATOR_AB8500
700 default y
701 help
702 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
703
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]704config MFD_DB8500_PRCMU
705 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
706 depends on UX500_SOC_DB8500
707 select MFD_CORE
708 help
709 Select this option to enable support for the DB8500 Power Reset
710 and Control Management Unit. This is basically an autonomous
711 system controller running an XP70 microprocessor, which is accessed
712 through a register map.
713
Linus Walleij83177972011-05-03 18:14:48 +0200[diff] [blame]714config MFD_DB5500_PRCMU
715 bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
716 depends on UX500_SOC_DB5500
717 select MFD_CORE
718 help
719 Select this option to enable support for the DB5500 Power Reset
720 and Control Management Unit. This is basically an autonomous
721 system controller running an XP70 microprocessor, which is accessed
722 through a register map.
723
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]724config MFD_CS5535
725 tristate "Support for CS5535 and CS5536 southbridge core functions"
726 select MFD_CORE
Andres Salomon15b7cf12011-03-27 21:26:03 -0700[diff] [blame]727 depends on PCI && X86
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]728 ---help---
729 This is the core driver for CS5535/CS5536 MFD functions. This is
730 necessary for using the board's GPIO and MFGPT functionality.
731
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]732config MFD_TIMBERDALE
733 tristate "Support for the Timberdale FPGA"
734 select MFD_CORE
Randy Dunlap546e29b62010-02-12 12:30:55 -0300[diff] [blame]735 depends on PCI && GPIOLIB
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]736 ---help---
737 This is the core driver for the timberdale FPGA. This device is a
738 multifunction device which exposes numerous platform devices.
739
740 The timberdale FPGA can be found on the Intel Atom development board
741 for in-vehicle infontainment, called Russellville.
Denis Turischeve82c60a2010-02-19 11:26:25 +0100[diff] [blame]742
743config LPC_SCH
744 tristate "Intel SCH LPC"
745 depends on PCI
746 select MFD_CORE
747 help
748 LPC bridge function of the Intel SCH provides support for
749 System Management Bus and General Purpose I/O.
750
Aaron Sierra4630b132012-03-28 09:43:10 -0500[diff] [blame^]751config LPC_ICH
752 tristate "Intel ICH LPC"
753 depends on PCI
754 select MFD_CORE
755 help
756 The LPC bridge function of the Intel ICH provides support for
757 many functional units. This driver provides needed support for
758 other drivers to control these functions, currently GPIO.
759
Florian Fainellie090d502010-03-21 01:06:05 +0100[diff] [blame]760config MFD_RDC321X
761 tristate "Support for RDC-R321x southbridge"
762 select MFD_CORE
763 depends on PCI
764 help
765 Say yes here if you want to have support for the RDC R-321x SoC
766 southbridge which provides access to GPIOs and Watchdog using the
767 southbridge PCI device configuration space.
768
Ira W. Snyderbd358132010-04-07 09:43:00 +0200[diff] [blame]769config MFD_JANZ_CMODIO
770 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
771 select MFD_CORE
772 depends on PCI
773 help
774 This is the core driver for the Janz CMOD-IO PCI MODULbus
775 carrier board. This device is a PCI to MODULbus bridge which may
776 host many different types of MODULbus daughterboards, including
777 CAN and GPIO controllers.
778
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]779config MFD_JZ4740_ADC
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]780 bool "Support for the JZ4740 SoC ADC core"
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]781 select MFD_CORE
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]782 select GENERIC_IRQ_CHIP
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]783 depends on MACH_JZ4740
784 help
785 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
786 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
787
Daniel Drake375fc772010-09-30 21:55:41 +0100[diff] [blame]788config MFD_VX855
789 tristate "Support for VIA VX855/VX875 integrated south bridge"
790 depends on PCI
791 select MFD_CORE
792 help
793 Say yes here to enable support for various functions of the
794 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
795 and/or vx855_gpio drivers for this to do anything useful.
796
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]797config MFD_WL1273_CORE
Matti Aaltonen94fd5b72011-03-01 10:10:35 -0300[diff] [blame]798 tristate "Support for TI WL1273 FM radio."
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]799 depends on I2C
800 select MFD_CORE
801 default n
802 help
803 This is the core driver for the TI WL1273 FM radio. This MFD
804 driver connects the radio-wl1273 V4L2 module and the wl1273
805 audio codec.
806
Keshava Munegowda17cdd292011-03-01 20:08:17 +0530[diff] [blame]807config MFD_OMAP_USB_HOST
808 bool "Support OMAP USBHS core driver"
809 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
810 default y
811 help
812 This is the core driver for the OAMP EHCI and OHCI drivers.
813 This MFD driver does the required setup functionalities for
814 OMAP USB Host drivers.
815
Abhijeet Dharmapurikarcbdb53e2011-04-05 14:40:52 -0700[diff] [blame]816config MFD_PM8XXX
817 tristate
818
819config MFD_PM8921_CORE
820 tristate "Qualcomm PM8921 PMIC chip"
821 depends on MSM_SSBI
822 select MFD_CORE
823 select MFD_PM8XXX
824 help
825 If you say yes to this option, support will be included for the
826 built-in PM8921 PMIC chip.
827
828 This is required if your board has a PM8921 and uses its features,
829 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
830
831 Say M here if you want to include support for PM8921 chip as a module.
832 This will build a module called "pm8921-core".
833
Abhijeet Dharmapurikarc013f0a2011-04-05 14:40:53 -0700[diff] [blame]834config MFD_PM8XXX_IRQ
835 bool "Support for Qualcomm PM8xxx IRQ features"
836 depends on MFD_PM8XXX
837 default y if MFD_PM8XXX
838 help
839 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
840
841 This is required to use certain other PM 8xxx features, such as GPIO
842 and MPP.
843
Axel Lin8509e142011-06-23 10:15:51 +0800[diff] [blame]844config TPS65911_COMPARATOR
845 tristate
846
Venu Byravarasu3c33be062012-03-16 11:10:19 +0530[diff] [blame]847config MFD_TPS65090
848 bool "TPS65090 Power Management chips"
849 depends on I2C=y && GENERIC_HARDIRQS
850 select MFD_CORE
851 select REGMAP_I2C
852 help
853 If you say yes here you get support for the TPS65090 series of
854 Power Management chips.
855 This driver provides common support for accessing the device,
856 additional drivers must be enabled in order to use the
857 functionality of the device.
858
Jin Park09d62922011-07-04 19:48:12 +0200[diff] [blame]859config MFD_AAT2870_CORE
860 bool "Support for the AnalogicTech AAT2870"
861 select MFD_CORE
862 depends on I2C=y && GPIOLIB
863 help
864 If you say yes here you get support for the AAT2870.
865 This driver provides common support for accessing the device,
866 additional drivers must be enabled in order to use the
867 functionality of the device.
868
Mika Westerberg1f5a3712011-09-21 13:03:07 +0200[diff] [blame]869config MFD_INTEL_MSIC
870 bool "Support for Intel MSIC"
871 depends on INTEL_SCU_IPC
872 select MFD_CORE
873 help
874 Select this option to enable access to Intel MSIC (Avatele
875 Passage) chip. This chip embeds audio, battery, GPIO, etc.
876 devices used in Intel Medfield platforms.
877
Laxman Dewangan1b1247d2012-02-28 18:35:17 +0530[diff] [blame]878config MFD_RC5T583
879 bool "Ricoh RC5T583 Power Management system device"
Laxman Dewangan5364d0b82012-03-19 11:44:55 +0530[diff] [blame]880 depends on I2C=y && GENERIC_HARDIRQS
Laxman Dewangan1b1247d2012-02-28 18:35:17 +0530[diff] [blame]881 select MFD_CORE
882 select REGMAP_I2C
883 help
884 Select this option to get support for the RICOH583 Power
885 Management system device.
886 This driver provides common support for accessing the device
887 through i2c interface. The device supports multiple sub-devices
888 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
889 Additional drivers must be enabled in order to use the
890 different functionality of the device.
891
Ying-Chun Liu (PaulLiu)75060a12012-03-16 21:12:32 +0100[diff] [blame]892config MFD_ANATOP
893 bool "Support for Freescale i.MX on-chip ANATOP controller"
894 depends on SOC_IMX6Q
895 help
896 Select this option to enable Freescale i.MX on-chip ANATOP
897 MFD controller. This controller embeds regulator and
898 thermal devices for Freescale i.MX platforms.
899
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]900endmenu
901endif
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]902
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]903menu "Multimedia Capabilities Port drivers"
Adrian Bunkf751d502006-03-24 03:18:21 -0800[diff] [blame]904 depends on ARCH_SA1100
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]905
906config MCP
907 tristate
908
Russell King5e742ad2005-08-18 10:08:15 +0100[diff] [blame]909# Interface drivers
910config MCP_SA11X0
911 tristate "Support SA11x0 MCP interface"
912 depends on ARCH_SA1100
913 select MCP
914
Russell King05c45ca2005-09-11 10:26:31 +0100[diff] [blame]915# Chip drivers
916config MCP_UCB1200
Russell Kinga3364402012-01-21 14:58:28 +0000[diff] [blame]917 bool "Support for UCB1200 / UCB1300"
918 depends on MCP_SA11X0
919 select MCP
Russell King05c45ca2005-09-11 10:26:31 +0100[diff] [blame]920
Russell Kingacb45432005-09-11 10:26:57 +0100[diff] [blame]921config MCP_UCB1200_TS
922 tristate "Touchscreen interface support"
923 depends on MCP_UCB1200 && INPUT
924
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]925endmenu