Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
Uwe Zeisberger | f30c226 | 2006-10-03 23:01:26 +0200 | [diff] [blame] | 2 | * sound/oss/sb_audio.c |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 | * |
| 4 | * Audio routines for Sound Blaster compatible cards. |
| 5 | * |
| 6 | * |
| 7 | * Copyright (C) by Hannu Savolainen 1993-1997 |
| 8 | * |
| 9 | * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) |
| 10 | * Version 2 (June 1991). See the "COPYING" file distributed with this software |
| 11 | * for more info. |
| 12 | * |
| 13 | * Changes |
| 14 | * Alan Cox : Formatting and clean ups |
| 15 | * |
| 16 | * Status |
| 17 | * Mostly working. Weird uart bug causing irq storms |
| 18 | * |
| 19 | * Daniel J. Rodriksson: Changes to make sb16 work full duplex. |
| 20 | * Maybe other 16 bit cards in this code could behave |
| 21 | * the same. |
| 22 | * Chris Rankin: Use spinlocks instead of CLI/STI |
| 23 | */ |
| 24 | |
| 25 | #include <linux/spinlock.h> |
| 26 | |
| 27 | #include "sound_config.h" |
| 28 | |
| 29 | #include "sb_mixer.h" |
| 30 | #include "sb.h" |
| 31 | |
| 32 | #include "sb_ess.h" |
| 33 | |
| 34 | int sb_audio_open(int dev, int mode) |
| 35 | { |
| 36 | sb_devc *devc = audio_devs[dev]->devc; |
| 37 | unsigned long flags; |
| 38 | |
| 39 | if (devc == NULL) |
| 40 | { |
| 41 | printk(KERN_ERR "Sound Blaster: incomplete initialization.\n"); |
| 42 | return -ENXIO; |
| 43 | } |
| 44 | if (devc->caps & SB_NO_RECORDING && mode & OPEN_READ) |
| 45 | { |
| 46 | if (mode == OPEN_READ) |
| 47 | return -EPERM; |
| 48 | } |
| 49 | spin_lock_irqsave(&devc->lock, flags); |
| 50 | if (devc->opened) |
| 51 | { |
| 52 | spin_unlock_irqrestore(&devc->lock, flags); |
| 53 | return -EBUSY; |
| 54 | } |
| 55 | if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex) |
| 56 | { |
| 57 | if (sound_open_dma(devc->dma16, "Sound Blaster 16 bit")) |
| 58 | { |
| 59 | spin_unlock_irqrestore(&devc->lock, flags); |
| 60 | return -EBUSY; |
| 61 | } |
| 62 | } |
| 63 | devc->opened = mode; |
| 64 | spin_unlock_irqrestore(&devc->lock, flags); |
| 65 | |
| 66 | devc->irq_mode = IMODE_NONE; |
| 67 | devc->irq_mode_16 = IMODE_NONE; |
| 68 | devc->fullduplex = devc->duplex && |
| 69 | ((mode & OPEN_READ) && (mode & OPEN_WRITE)); |
| 70 | sb_dsp_reset(devc); |
| 71 | |
| 72 | /* At first glance this check isn't enough, some ESS chips might not |
| 73 | * have a RECLEV. However if they don't common_mixer_set will refuse |
| 74 | * cause devc->iomap has no register mapping for RECLEV |
| 75 | */ |
| 76 | if (devc->model == MDL_ESS) ess_mixer_reload (devc, SOUND_MIXER_RECLEV); |
| 77 | |
| 78 | /* The ALS007 seems to require that the DSP be removed from the output */ |
| 79 | /* in order for recording to be activated properly. This is done by */ |
| 80 | /* setting the appropriate bits of the output control register 4ch to */ |
| 81 | /* zero. This code assumes that the output control registers are not */ |
| 82 | /* used anywhere else and therefore the DSP bits are *always* ON for */ |
| 83 | /* output and OFF for sampling. */ |
| 84 | |
| 85 | if (devc->submodel == SUBMDL_ALS007) |
| 86 | { |
| 87 | if (mode & OPEN_READ) |
| 88 | sb_setmixer(devc,ALS007_OUTPUT_CTRL2, |
| 89 | sb_getmixer(devc,ALS007_OUTPUT_CTRL2) & 0xf9); |
| 90 | else |
| 91 | sb_setmixer(devc,ALS007_OUTPUT_CTRL2, |
| 92 | sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06); |
| 93 | } |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | void sb_audio_close(int dev) |
| 98 | { |
| 99 | sb_devc *devc = audio_devs[dev]->devc; |
| 100 | |
| 101 | /* fix things if mmap turned off fullduplex */ |
| 102 | if(devc->duplex |
| 103 | && !devc->fullduplex |
| 104 | && (devc->opened & OPEN_READ) && (devc->opened & OPEN_WRITE)) |
| 105 | { |
| 106 | struct dma_buffparms *dmap_temp; |
| 107 | dmap_temp = audio_devs[dev]->dmap_out; |
| 108 | audio_devs[dev]->dmap_out = audio_devs[dev]->dmap_in; |
| 109 | audio_devs[dev]->dmap_in = dmap_temp; |
| 110 | } |
| 111 | audio_devs[dev]->dmap_out->dma = devc->dma8; |
| 112 | audio_devs[dev]->dmap_in->dma = ( devc->duplex ) ? |
| 113 | devc->dma16 : devc->dma8; |
| 114 | |
| 115 | if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex) |
| 116 | sound_close_dma(devc->dma16); |
| 117 | |
| 118 | /* For ALS007, turn DSP output back on if closing the device for read */ |
| 119 | |
| 120 | if ((devc->submodel == SUBMDL_ALS007) && (devc->opened & OPEN_READ)) |
| 121 | { |
| 122 | sb_setmixer(devc,ALS007_OUTPUT_CTRL2, |
| 123 | sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06); |
| 124 | } |
| 125 | devc->opened = 0; |
| 126 | } |
| 127 | |
| 128 | static void sb_set_output_parms(int dev, unsigned long buf, int nr_bytes, |
| 129 | int intrflag) |
| 130 | { |
| 131 | sb_devc *devc = audio_devs[dev]->devc; |
| 132 | |
| 133 | if (!devc->fullduplex || devc->bits == AFMT_S16_LE) |
| 134 | { |
| 135 | devc->trg_buf = buf; |
| 136 | devc->trg_bytes = nr_bytes; |
| 137 | devc->trg_intrflag = intrflag; |
| 138 | devc->irq_mode = IMODE_OUTPUT; |
| 139 | } |
| 140 | else |
| 141 | { |
| 142 | devc->trg_buf_16 = buf; |
| 143 | devc->trg_bytes_16 = nr_bytes; |
| 144 | devc->trg_intrflag_16 = intrflag; |
| 145 | devc->irq_mode_16 = IMODE_OUTPUT; |
| 146 | } |
| 147 | } |
| 148 | |
| 149 | static void sb_set_input_parms(int dev, unsigned long buf, int count, int intrflag) |
| 150 | { |
| 151 | sb_devc *devc = audio_devs[dev]->devc; |
| 152 | |
| 153 | if (!devc->fullduplex || devc->bits != AFMT_S16_LE) |
| 154 | { |
| 155 | devc->trg_buf = buf; |
| 156 | devc->trg_bytes = count; |
| 157 | devc->trg_intrflag = intrflag; |
| 158 | devc->irq_mode = IMODE_INPUT; |
| 159 | } |
| 160 | else |
| 161 | { |
| 162 | devc->trg_buf_16 = buf; |
| 163 | devc->trg_bytes_16 = count; |
| 164 | devc->trg_intrflag_16 = intrflag; |
| 165 | devc->irq_mode_16 = IMODE_INPUT; |
| 166 | } |
| 167 | } |
| 168 | |
| 169 | /* |
| 170 | * SB1.x compatible routines |
| 171 | */ |
| 172 | |
| 173 | static void sb1_audio_output_block(int dev, unsigned long buf, int nr_bytes, int intrflag) |
| 174 | { |
| 175 | unsigned long flags; |
| 176 | int count = nr_bytes; |
| 177 | sb_devc *devc = audio_devs[dev]->devc; |
| 178 | |
| 179 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ |
| 180 | |
| 181 | if (audio_devs[dev]->dmap_out->dma > 3) |
| 182 | count >>= 1; |
| 183 | count--; |
| 184 | |
| 185 | devc->irq_mode = IMODE_OUTPUT; |
| 186 | |
| 187 | spin_lock_irqsave(&devc->lock, flags); |
| 188 | if (sb_dsp_command(devc, 0x14)) /* 8 bit DAC using DMA */ |
| 189 | { |
| 190 | sb_dsp_command(devc, (unsigned char) (count & 0xff)); |
| 191 | sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); |
| 192 | } |
| 193 | else |
| 194 | printk(KERN_WARNING "Sound Blaster: unable to start DAC.\n"); |
| 195 | spin_unlock_irqrestore(&devc->lock, flags); |
| 196 | devc->intr_active = 1; |
| 197 | } |
| 198 | |
| 199 | static void sb1_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag) |
| 200 | { |
| 201 | unsigned long flags; |
| 202 | int count = nr_bytes; |
| 203 | sb_devc *devc = audio_devs[dev]->devc; |
| 204 | |
| 205 | /* |
| 206 | * Start a DMA input to the buffer pointed by dmaqtail |
| 207 | */ |
| 208 | |
| 209 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ |
| 210 | |
| 211 | if (audio_devs[dev]->dmap_out->dma > 3) |
| 212 | count >>= 1; |
| 213 | count--; |
| 214 | |
| 215 | devc->irq_mode = IMODE_INPUT; |
| 216 | |
| 217 | spin_lock_irqsave(&devc->lock, flags); |
| 218 | if (sb_dsp_command(devc, 0x24)) /* 8 bit ADC using DMA */ |
| 219 | { |
| 220 | sb_dsp_command(devc, (unsigned char) (count & 0xff)); |
| 221 | sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); |
| 222 | } |
| 223 | else |
| 224 | printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); |
| 225 | spin_unlock_irqrestore(&devc->lock, flags); |
| 226 | |
| 227 | devc->intr_active = 1; |
| 228 | } |
| 229 | |
| 230 | static void sb1_audio_trigger(int dev, int bits) |
| 231 | { |
| 232 | sb_devc *devc = audio_devs[dev]->devc; |
| 233 | |
| 234 | bits &= devc->irq_mode; |
| 235 | |
| 236 | if (!bits) |
| 237 | sb_dsp_command(devc, 0xd0); /* Halt DMA */ |
| 238 | else |
| 239 | { |
| 240 | switch (devc->irq_mode) |
| 241 | { |
| 242 | case IMODE_INPUT: |
| 243 | sb1_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, |
| 244 | devc->trg_intrflag); |
| 245 | break; |
| 246 | |
| 247 | case IMODE_OUTPUT: |
| 248 | sb1_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, |
| 249 | devc->trg_intrflag); |
| 250 | break; |
| 251 | } |
| 252 | } |
| 253 | devc->trigger_bits = bits; |
| 254 | } |
| 255 | |
| 256 | static int sb1_audio_prepare_for_input(int dev, int bsize, int bcount) |
| 257 | { |
| 258 | sb_devc *devc = audio_devs[dev]->devc; |
| 259 | unsigned long flags; |
| 260 | |
| 261 | spin_lock_irqsave(&devc->lock, flags); |
| 262 | if (sb_dsp_command(devc, 0x40)) |
| 263 | sb_dsp_command(devc, devc->tconst); |
| 264 | sb_dsp_command(devc, DSP_CMD_SPKOFF); |
| 265 | spin_unlock_irqrestore(&devc->lock, flags); |
| 266 | |
| 267 | devc->trigger_bits = 0; |
| 268 | return 0; |
| 269 | } |
| 270 | |
| 271 | static int sb1_audio_prepare_for_output(int dev, int bsize, int bcount) |
| 272 | { |
| 273 | sb_devc *devc = audio_devs[dev]->devc; |
| 274 | unsigned long flags; |
| 275 | |
| 276 | spin_lock_irqsave(&devc->lock, flags); |
| 277 | if (sb_dsp_command(devc, 0x40)) |
| 278 | sb_dsp_command(devc, devc->tconst); |
| 279 | sb_dsp_command(devc, DSP_CMD_SPKON); |
| 280 | spin_unlock_irqrestore(&devc->lock, flags); |
| 281 | devc->trigger_bits = 0; |
| 282 | return 0; |
| 283 | } |
| 284 | |
| 285 | static int sb1_audio_set_speed(int dev, int speed) |
| 286 | { |
| 287 | int max_speed = 23000; |
| 288 | sb_devc *devc = audio_devs[dev]->devc; |
| 289 | int tmp; |
| 290 | |
| 291 | if (devc->opened & OPEN_READ) |
| 292 | max_speed = 13000; |
| 293 | |
| 294 | if (speed > 0) |
| 295 | { |
| 296 | if (speed < 4000) |
| 297 | speed = 4000; |
| 298 | |
| 299 | if (speed > max_speed) |
| 300 | speed = max_speed; |
| 301 | |
| 302 | devc->tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff; |
| 303 | tmp = 256 - devc->tconst; |
| 304 | speed = (1000000 + tmp / 2) / tmp; |
| 305 | |
| 306 | devc->speed = speed; |
| 307 | } |
| 308 | return devc->speed; |
| 309 | } |
| 310 | |
| 311 | static short sb1_audio_set_channels(int dev, short channels) |
| 312 | { |
| 313 | sb_devc *devc = audio_devs[dev]->devc; |
| 314 | return devc->channels = 1; |
| 315 | } |
| 316 | |
| 317 | static unsigned int sb1_audio_set_bits(int dev, unsigned int bits) |
| 318 | { |
| 319 | sb_devc *devc = audio_devs[dev]->devc; |
| 320 | return devc->bits = 8; |
| 321 | } |
| 322 | |
| 323 | static void sb1_audio_halt_xfer(int dev) |
| 324 | { |
| 325 | unsigned long flags; |
| 326 | sb_devc *devc = audio_devs[dev]->devc; |
| 327 | |
| 328 | spin_lock_irqsave(&devc->lock, flags); |
| 329 | sb_dsp_reset(devc); |
| 330 | spin_unlock_irqrestore(&devc->lock, flags); |
| 331 | } |
| 332 | |
| 333 | /* |
| 334 | * SB 2.0 and SB 2.01 compatible routines |
| 335 | */ |
| 336 | |
| 337 | static void sb20_audio_output_block(int dev, unsigned long buf, int nr_bytes, |
| 338 | int intrflag) |
| 339 | { |
| 340 | unsigned long flags; |
| 341 | int count = nr_bytes; |
| 342 | sb_devc *devc = audio_devs[dev]->devc; |
| 343 | unsigned char cmd; |
| 344 | |
| 345 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ |
| 346 | |
| 347 | if (audio_devs[dev]->dmap_out->dma > 3) |
| 348 | count >>= 1; |
| 349 | count--; |
| 350 | |
| 351 | devc->irq_mode = IMODE_OUTPUT; |
| 352 | |
| 353 | spin_lock_irqsave(&devc->lock, flags); |
| 354 | if (sb_dsp_command(devc, 0x48)) /* DSP Block size */ |
| 355 | { |
| 356 | sb_dsp_command(devc, (unsigned char) (count & 0xff)); |
| 357 | sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); |
| 358 | |
| 359 | if (devc->speed * devc->channels <= 23000) |
| 360 | cmd = 0x1c; /* 8 bit PCM output */ |
| 361 | else |
| 362 | cmd = 0x90; /* 8 bit high speed PCM output (SB2.01/Pro) */ |
| 363 | |
| 364 | if (!sb_dsp_command(devc, cmd)) |
| 365 | printk(KERN_ERR "Sound Blaster: unable to start DAC.\n"); |
| 366 | } |
| 367 | else |
| 368 | printk(KERN_ERR "Sound Blaster: unable to start DAC.\n"); |
| 369 | spin_unlock_irqrestore(&devc->lock, flags); |
| 370 | devc->intr_active = 1; |
| 371 | } |
| 372 | |
| 373 | static void sb20_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag) |
| 374 | { |
| 375 | unsigned long flags; |
| 376 | int count = nr_bytes; |
| 377 | sb_devc *devc = audio_devs[dev]->devc; |
| 378 | unsigned char cmd; |
| 379 | |
| 380 | /* |
| 381 | * Start a DMA input to the buffer pointed by dmaqtail |
| 382 | */ |
| 383 | |
| 384 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ |
| 385 | |
| 386 | if (audio_devs[dev]->dmap_out->dma > 3) |
| 387 | count >>= 1; |
| 388 | count--; |
| 389 | |
| 390 | devc->irq_mode = IMODE_INPUT; |
| 391 | |
| 392 | spin_lock_irqsave(&devc->lock, flags); |
| 393 | if (sb_dsp_command(devc, 0x48)) /* DSP Block size */ |
| 394 | { |
| 395 | sb_dsp_command(devc, (unsigned char) (count & 0xff)); |
| 396 | sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); |
| 397 | |
| 398 | if (devc->speed * devc->channels <= (devc->major == 3 ? 23000 : 13000)) |
| 399 | cmd = 0x2c; /* 8 bit PCM input */ |
| 400 | else |
| 401 | cmd = 0x98; /* 8 bit high speed PCM input (SB2.01/Pro) */ |
| 402 | |
| 403 | if (!sb_dsp_command(devc, cmd)) |
| 404 | printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); |
| 405 | } |
| 406 | else |
| 407 | printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); |
| 408 | spin_unlock_irqrestore(&devc->lock, flags); |
| 409 | devc->intr_active = 1; |
| 410 | } |
| 411 | |
| 412 | static void sb20_audio_trigger(int dev, int bits) |
| 413 | { |
| 414 | sb_devc *devc = audio_devs[dev]->devc; |
| 415 | bits &= devc->irq_mode; |
| 416 | |
| 417 | if (!bits) |
| 418 | sb_dsp_command(devc, 0xd0); /* Halt DMA */ |
| 419 | else |
| 420 | { |
| 421 | switch (devc->irq_mode) |
| 422 | { |
| 423 | case IMODE_INPUT: |
| 424 | sb20_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, |
| 425 | devc->trg_intrflag); |
| 426 | break; |
| 427 | |
| 428 | case IMODE_OUTPUT: |
| 429 | sb20_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, |
| 430 | devc->trg_intrflag); |
| 431 | break; |
| 432 | } |
| 433 | } |
| 434 | devc->trigger_bits = bits; |
| 435 | } |
| 436 | |
| 437 | /* |
| 438 | * SB2.01 specific speed setup |
| 439 | */ |
| 440 | |
| 441 | static int sb201_audio_set_speed(int dev, int speed) |
| 442 | { |
| 443 | sb_devc *devc = audio_devs[dev]->devc; |
| 444 | int tmp; |
| 445 | int s = speed * devc->channels; |
| 446 | |
| 447 | if (speed > 0) |
| 448 | { |
| 449 | if (speed < 4000) |
| 450 | speed = 4000; |
| 451 | if (speed > 44100) |
| 452 | speed = 44100; |
| 453 | if (devc->opened & OPEN_READ && speed > 15000) |
| 454 | speed = 15000; |
| 455 | devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; |
| 456 | tmp = 256 - devc->tconst; |
| 457 | speed = ((1000000 + tmp / 2) / tmp) / devc->channels; |
| 458 | |
| 459 | devc->speed = speed; |
| 460 | } |
| 461 | return devc->speed; |
| 462 | } |
| 463 | |
| 464 | /* |
| 465 | * SB Pro specific routines |
| 466 | */ |
| 467 | |
| 468 | static int sbpro_audio_prepare_for_input(int dev, int bsize, int bcount) |
| 469 | { /* For SB Pro and Jazz16 */ |
| 470 | sb_devc *devc = audio_devs[dev]->devc; |
| 471 | unsigned long flags; |
| 472 | unsigned char bits = 0; |
| 473 | |
| 474 | if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) |
| 475 | audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = |
| 476 | devc->bits == 16 ? devc->dma16 : devc->dma8; |
| 477 | |
| 478 | if (devc->model == MDL_JAZZ || devc->model == MDL_SMW) |
| 479 | if (devc->bits == AFMT_S16_LE) |
| 480 | bits = 0x04; /* 16 bit mode */ |
| 481 | |
| 482 | spin_lock_irqsave(&devc->lock, flags); |
| 483 | if (sb_dsp_command(devc, 0x40)) |
| 484 | sb_dsp_command(devc, devc->tconst); |
| 485 | sb_dsp_command(devc, DSP_CMD_SPKOFF); |
| 486 | if (devc->channels == 1) |
| 487 | sb_dsp_command(devc, 0xa0 | bits); /* Mono input */ |
| 488 | else |
| 489 | sb_dsp_command(devc, 0xa8 | bits); /* Stereo input */ |
| 490 | spin_unlock_irqrestore(&devc->lock, flags); |
| 491 | |
| 492 | devc->trigger_bits = 0; |
| 493 | return 0; |
| 494 | } |
| 495 | |
| 496 | static int sbpro_audio_prepare_for_output(int dev, int bsize, int bcount) |
| 497 | { /* For SB Pro and Jazz16 */ |
| 498 | sb_devc *devc = audio_devs[dev]->devc; |
| 499 | unsigned long flags; |
| 500 | unsigned char tmp; |
| 501 | unsigned char bits = 0; |
| 502 | |
| 503 | if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) |
| 504 | audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = devc->bits == 16 ? devc->dma16 : devc->dma8; |
| 505 | if (devc->model == MDL_SBPRO) |
| 506 | sb_mixer_set_stereo(devc, devc->channels == 2); |
| 507 | |
| 508 | spin_lock_irqsave(&devc->lock, flags); |
| 509 | if (sb_dsp_command(devc, 0x40)) |
| 510 | sb_dsp_command(devc, devc->tconst); |
| 511 | sb_dsp_command(devc, DSP_CMD_SPKON); |
| 512 | |
| 513 | if (devc->model == MDL_JAZZ || devc->model == MDL_SMW) |
| 514 | { |
| 515 | if (devc->bits == AFMT_S16_LE) |
| 516 | bits = 0x04; /* 16 bit mode */ |
| 517 | |
| 518 | if (devc->channels == 1) |
| 519 | sb_dsp_command(devc, 0xa0 | bits); /* Mono output */ |
| 520 | else |
| 521 | sb_dsp_command(devc, 0xa8 | bits); /* Stereo output */ |
| 522 | spin_unlock_irqrestore(&devc->lock, flags); |
| 523 | } |
| 524 | else |
| 525 | { |
| 526 | spin_unlock_irqrestore(&devc->lock, flags); |
| 527 | tmp = sb_getmixer(devc, 0x0e); |
| 528 | if (devc->channels == 1) |
| 529 | tmp &= ~0x02; |
| 530 | else |
| 531 | tmp |= 0x02; |
| 532 | sb_setmixer(devc, 0x0e, tmp); |
| 533 | } |
| 534 | devc->trigger_bits = 0; |
| 535 | return 0; |
| 536 | } |
| 537 | |
| 538 | static int sbpro_audio_set_speed(int dev, int speed) |
| 539 | { |
| 540 | sb_devc *devc = audio_devs[dev]->devc; |
| 541 | |
| 542 | if (speed > 0) |
| 543 | { |
| 544 | if (speed < 4000) |
| 545 | speed = 4000; |
| 546 | if (speed > 44100) |
| 547 | speed = 44100; |
| 548 | if (devc->channels > 1 && speed > 22050) |
| 549 | speed = 22050; |
| 550 | sb201_audio_set_speed(dev, speed); |
| 551 | } |
| 552 | return devc->speed; |
| 553 | } |
| 554 | |
| 555 | static short sbpro_audio_set_channels(int dev, short channels) |
| 556 | { |
| 557 | sb_devc *devc = audio_devs[dev]->devc; |
| 558 | |
| 559 | if (channels == 1 || channels == 2) |
| 560 | { |
| 561 | if (channels != devc->channels) |
| 562 | { |
| 563 | devc->channels = channels; |
| 564 | if (devc->model == MDL_SBPRO && devc->channels == 2) |
| 565 | sbpro_audio_set_speed(dev, devc->speed); |
| 566 | } |
| 567 | } |
| 568 | return devc->channels; |
| 569 | } |
| 570 | |
| 571 | static int jazz16_audio_set_speed(int dev, int speed) |
| 572 | { |
| 573 | sb_devc *devc = audio_devs[dev]->devc; |
| 574 | |
| 575 | if (speed > 0) |
| 576 | { |
| 577 | int tmp; |
| 578 | int s = speed * devc->channels; |
| 579 | |
| 580 | if (speed < 5000) |
| 581 | speed = 5000; |
| 582 | if (speed > 44100) |
| 583 | speed = 44100; |
| 584 | |
| 585 | devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; |
| 586 | |
| 587 | tmp = 256 - devc->tconst; |
| 588 | speed = ((1000000 + tmp / 2) / tmp) / devc->channels; |
| 589 | |
| 590 | devc->speed = speed; |
| 591 | } |
| 592 | return devc->speed; |
| 593 | } |
| 594 | |
| 595 | /* |
| 596 | * SB16 specific routines |
| 597 | */ |
| 598 | |
| 599 | static int sb16_audio_set_speed(int dev, int speed) |
| 600 | { |
| 601 | sb_devc *devc = audio_devs[dev]->devc; |
| 602 | int max_speed = devc->submodel == SUBMDL_ALS100 ? 48000 : 44100; |
| 603 | |
| 604 | if (speed > 0) |
| 605 | { |
| 606 | if (speed < 5000) |
| 607 | speed = 5000; |
| 608 | |
| 609 | if (speed > max_speed) |
| 610 | speed = max_speed; |
| 611 | |
| 612 | devc->speed = speed; |
| 613 | } |
| 614 | return devc->speed; |
| 615 | } |
| 616 | |
| 617 | static unsigned int sb16_audio_set_bits(int dev, unsigned int bits) |
| 618 | { |
| 619 | sb_devc *devc = audio_devs[dev]->devc; |
| 620 | |
| 621 | if (bits != 0) |
| 622 | { |
| 623 | if (bits == AFMT_U8 || bits == AFMT_S16_LE) |
| 624 | devc->bits = bits; |
| 625 | else |
| 626 | devc->bits = AFMT_U8; |
| 627 | } |
| 628 | |
| 629 | return devc->bits; |
| 630 | } |
| 631 | |
| 632 | static int sb16_audio_prepare_for_input(int dev, int bsize, int bcount) |
| 633 | { |
| 634 | sb_devc *devc = audio_devs[dev]->devc; |
| 635 | |
| 636 | if (!devc->fullduplex) |
| 637 | { |
| 638 | audio_devs[dev]->dmap_out->dma = |
| 639 | audio_devs[dev]->dmap_in->dma = |
| 640 | devc->bits == AFMT_S16_LE ? |
| 641 | devc->dma16 : devc->dma8; |
| 642 | } |
| 643 | else if (devc->bits == AFMT_S16_LE) |
| 644 | { |
| 645 | audio_devs[dev]->dmap_out->dma = devc->dma8; |
| 646 | audio_devs[dev]->dmap_in->dma = devc->dma16; |
| 647 | } |
| 648 | else |
| 649 | { |
| 650 | audio_devs[dev]->dmap_out->dma = devc->dma16; |
| 651 | audio_devs[dev]->dmap_in->dma = devc->dma8; |
| 652 | } |
| 653 | |
| 654 | devc->trigger_bits = 0; |
| 655 | return 0; |
| 656 | } |
| 657 | |
| 658 | static int sb16_audio_prepare_for_output(int dev, int bsize, int bcount) |
| 659 | { |
| 660 | sb_devc *devc = audio_devs[dev]->devc; |
| 661 | |
| 662 | if (!devc->fullduplex) |
| 663 | { |
| 664 | audio_devs[dev]->dmap_out->dma = |
| 665 | audio_devs[dev]->dmap_in->dma = |
| 666 | devc->bits == AFMT_S16_LE ? |
| 667 | devc->dma16 : devc->dma8; |
| 668 | } |
| 669 | else if (devc->bits == AFMT_S16_LE) |
| 670 | { |
| 671 | audio_devs[dev]->dmap_out->dma = devc->dma8; |
| 672 | audio_devs[dev]->dmap_in->dma = devc->dma16; |
| 673 | } |
| 674 | else |
| 675 | { |
| 676 | audio_devs[dev]->dmap_out->dma = devc->dma16; |
| 677 | audio_devs[dev]->dmap_in->dma = devc->dma8; |
| 678 | } |
| 679 | |
| 680 | devc->trigger_bits = 0; |
| 681 | return 0; |
| 682 | } |
| 683 | |
| 684 | static void sb16_audio_output_block(int dev, unsigned long buf, int count, |
| 685 | int intrflag) |
| 686 | { |
| 687 | unsigned long flags, cnt; |
| 688 | sb_devc *devc = audio_devs[dev]->devc; |
| 689 | unsigned long bits; |
| 690 | |
| 691 | if (!devc->fullduplex || devc->bits == AFMT_S16_LE) |
| 692 | { |
| 693 | devc->irq_mode = IMODE_OUTPUT; |
| 694 | devc->intr_active = 1; |
| 695 | } |
| 696 | else |
| 697 | { |
| 698 | devc->irq_mode_16 = IMODE_OUTPUT; |
| 699 | devc->intr_active_16 = 1; |
| 700 | } |
| 701 | |
| 702 | /* save value */ |
| 703 | spin_lock_irqsave(&devc->lock, flags); |
| 704 | bits = devc->bits; |
| 705 | if (devc->fullduplex) |
| 706 | devc->bits = (devc->bits == AFMT_S16_LE) ? |
| 707 | AFMT_U8 : AFMT_S16_LE; |
| 708 | spin_unlock_irqrestore(&devc->lock, flags); |
| 709 | |
| 710 | cnt = count; |
| 711 | if (devc->bits == AFMT_S16_LE) |
| 712 | cnt >>= 1; |
| 713 | cnt--; |
| 714 | |
| 715 | spin_lock_irqsave(&devc->lock, flags); |
| 716 | |
| 717 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ |
| 718 | |
| 719 | sb_dsp_command(devc, 0x41); |
| 720 | sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff)); |
| 721 | sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff)); |
| 722 | |
| 723 | sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xb6 : 0xc6)); |
| 724 | sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) + |
| 725 | (devc->bits == AFMT_S16_LE ? 0x10 : 0))); |
| 726 | sb_dsp_command(devc, (unsigned char) (cnt & 0xff)); |
| 727 | sb_dsp_command(devc, (unsigned char) (cnt >> 8)); |
| 728 | |
| 729 | /* restore real value after all programming */ |
| 730 | devc->bits = bits; |
| 731 | spin_unlock_irqrestore(&devc->lock, flags); |
| 732 | } |
| 733 | |
| 734 | |
| 735 | /* |
| 736 | * This fails on the Cyrix MediaGX. If you don't have the DMA enabled |
| 737 | * before the first sample arrives it locks up. However even if you |
| 738 | * do enable the DMA in time you just get DMA timeouts and missing |
| 739 | * interrupts and stuff, so for now I've not bothered fixing this either. |
| 740 | */ |
| 741 | |
| 742 | static void sb16_audio_start_input(int dev, unsigned long buf, int count, int intrflag) |
| 743 | { |
| 744 | unsigned long flags, cnt; |
| 745 | sb_devc *devc = audio_devs[dev]->devc; |
| 746 | |
| 747 | if (!devc->fullduplex || devc->bits != AFMT_S16_LE) |
| 748 | { |
| 749 | devc->irq_mode = IMODE_INPUT; |
| 750 | devc->intr_active = 1; |
| 751 | } |
| 752 | else |
| 753 | { |
| 754 | devc->irq_mode_16 = IMODE_INPUT; |
| 755 | devc->intr_active_16 = 1; |
| 756 | } |
| 757 | |
| 758 | cnt = count; |
| 759 | if (devc->bits == AFMT_S16_LE) |
| 760 | cnt >>= 1; |
| 761 | cnt--; |
| 762 | |
| 763 | spin_lock_irqsave(&devc->lock, flags); |
| 764 | |
| 765 | /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ |
| 766 | |
| 767 | sb_dsp_command(devc, 0x42); |
| 768 | sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff)); |
| 769 | sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff)); |
| 770 | |
| 771 | sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xbe : 0xce)); |
| 772 | sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) + |
| 773 | (devc->bits == AFMT_S16_LE ? 0x10 : 0))); |
| 774 | sb_dsp_command(devc, (unsigned char) (cnt & 0xff)); |
| 775 | sb_dsp_command(devc, (unsigned char) (cnt >> 8)); |
| 776 | |
| 777 | spin_unlock_irqrestore(&devc->lock, flags); |
| 778 | } |
| 779 | |
| 780 | static void sb16_audio_trigger(int dev, int bits) |
| 781 | { |
| 782 | sb_devc *devc = audio_devs[dev]->devc; |
| 783 | |
| 784 | int bits_16 = bits & devc->irq_mode_16; |
| 785 | bits &= devc->irq_mode; |
| 786 | |
| 787 | if (!bits && !bits_16) |
| 788 | sb_dsp_command(devc, 0xd0); /* Halt DMA */ |
| 789 | else |
| 790 | { |
| 791 | if (bits) |
| 792 | { |
| 793 | switch (devc->irq_mode) |
| 794 | { |
| 795 | case IMODE_INPUT: |
| 796 | sb16_audio_start_input(dev, |
| 797 | devc->trg_buf, |
| 798 | devc->trg_bytes, |
| 799 | devc->trg_intrflag); |
| 800 | break; |
| 801 | |
| 802 | case IMODE_OUTPUT: |
| 803 | sb16_audio_output_block(dev, |
| 804 | devc->trg_buf, |
| 805 | devc->trg_bytes, |
| 806 | devc->trg_intrflag); |
| 807 | break; |
| 808 | } |
| 809 | } |
| 810 | if (bits_16) |
| 811 | { |
| 812 | switch (devc->irq_mode_16) |
| 813 | { |
| 814 | case IMODE_INPUT: |
| 815 | sb16_audio_start_input(dev, |
| 816 | devc->trg_buf_16, |
| 817 | devc->trg_bytes_16, |
| 818 | devc->trg_intrflag_16); |
| 819 | break; |
| 820 | |
| 821 | case IMODE_OUTPUT: |
| 822 | sb16_audio_output_block(dev, |
| 823 | devc->trg_buf_16, |
| 824 | devc->trg_bytes_16, |
| 825 | devc->trg_intrflag_16); |
| 826 | break; |
| 827 | } |
| 828 | } |
| 829 | } |
| 830 | |
| 831 | devc->trigger_bits = bits | bits_16; |
| 832 | } |
| 833 | |
| 834 | static unsigned char lbuf8[2048]; |
| 835 | static signed short *lbuf16 = (signed short *)lbuf8; |
| 836 | #define LBUFCOPYSIZE 1024 |
| 837 | static void |
| 838 | sb16_copy_from_user(int dev, |
| 839 | char *localbuf, int localoffs, |
| 840 | const char __user *userbuf, int useroffs, |
| 841 | int max_in, int max_out, |
| 842 | int *used, int *returned, |
| 843 | int len) |
| 844 | { |
| 845 | sb_devc *devc = audio_devs[dev]->devc; |
| 846 | int i, c, p, locallen; |
| 847 | unsigned char *buf8; |
| 848 | signed short *buf16; |
| 849 | |
| 850 | /* if not duplex no conversion */ |
| 851 | if (!devc->fullduplex) |
| 852 | { |
| 853 | if (copy_from_user(localbuf + localoffs, |
| 854 | userbuf + useroffs, len)) |
| 855 | return; |
| 856 | *used = len; |
| 857 | *returned = len; |
| 858 | } |
| 859 | else if (devc->bits == AFMT_S16_LE) |
| 860 | { |
| 861 | /* 16 -> 8 */ |
| 862 | /* max_in >> 1, max number of samples in ( 16 bits ) */ |
| 863 | /* max_out, max number of samples out ( 8 bits ) */ |
| 864 | /* len, number of samples that will be taken ( 16 bits )*/ |
| 865 | /* c, count of samples remaining in buffer ( 16 bits )*/ |
| 866 | /* p, count of samples already processed ( 16 bits )*/ |
| 867 | len = ( (max_in >> 1) > max_out) ? max_out : (max_in >> 1); |
| 868 | c = len; |
| 869 | p = 0; |
| 870 | buf8 = (unsigned char *)(localbuf + localoffs); |
| 871 | while (c) |
| 872 | { |
| 873 | locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c); |
| 874 | /* << 1 in order to get 16 bit samples */ |
| 875 | if (copy_from_user(lbuf16, |
| 876 | userbuf + useroffs + (p << 1), |
| 877 | locallen << 1)) |
| 878 | return; |
| 879 | for (i = 0; i < locallen; i++) |
| 880 | { |
| 881 | buf8[p+i] = ~((lbuf16[i] >> 8) & 0xff) ^ 0x80; |
| 882 | } |
| 883 | c -= locallen; p += locallen; |
| 884 | } |
| 885 | /* used = ( samples * 16 bits size ) */ |
| 886 | *used = max_in > ( max_out << 1) ? (max_out << 1) : max_in; |
| 887 | /* returned = ( samples * 8 bits size ) */ |
| 888 | *returned = len; |
| 889 | } |
| 890 | else |
| 891 | { |
| 892 | /* 8 -> 16 */ |
| 893 | /* max_in, max number of samples in ( 8 bits ) */ |
| 894 | /* max_out >> 1, max number of samples out ( 16 bits ) */ |
| 895 | /* len, number of samples that will be taken ( 8 bits )*/ |
| 896 | /* c, count of samples remaining in buffer ( 8 bits )*/ |
| 897 | /* p, count of samples already processed ( 8 bits )*/ |
| 898 | len = max_in > (max_out >> 1) ? (max_out >> 1) : max_in; |
| 899 | c = len; |
| 900 | p = 0; |
| 901 | buf16 = (signed short *)(localbuf + localoffs); |
| 902 | while (c) |
| 903 | { |
| 904 | locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c); |
| 905 | if (copy_from_user(lbuf8, |
| 906 | userbuf+useroffs + p, |
| 907 | locallen)) |
| 908 | return; |
| 909 | for (i = 0; i < locallen; i++) |
| 910 | { |
| 911 | buf16[p+i] = (~lbuf8[i] ^ 0x80) << 8; |
| 912 | } |
| 913 | c -= locallen; p += locallen; |
| 914 | } |
| 915 | /* used = ( samples * 8 bits size ) */ |
| 916 | *used = len; |
| 917 | /* returned = ( samples * 16 bits size ) */ |
| 918 | *returned = len << 1; |
| 919 | } |
| 920 | } |
| 921 | |
| 922 | static void |
| 923 | sb16_audio_mmap(int dev) |
| 924 | { |
| 925 | sb_devc *devc = audio_devs[dev]->devc; |
| 926 | devc->fullduplex = 0; |
| 927 | } |
| 928 | |
| 929 | static struct audio_driver sb1_audio_driver = /* SB1.x */ |
| 930 | { |
| 931 | .owner = THIS_MODULE, |
| 932 | .open = sb_audio_open, |
| 933 | .close = sb_audio_close, |
| 934 | .output_block = sb_set_output_parms, |
| 935 | .start_input = sb_set_input_parms, |
| 936 | .prepare_for_input = sb1_audio_prepare_for_input, |
| 937 | .prepare_for_output = sb1_audio_prepare_for_output, |
| 938 | .halt_io = sb1_audio_halt_xfer, |
| 939 | .trigger = sb1_audio_trigger, |
| 940 | .set_speed = sb1_audio_set_speed, |
| 941 | .set_bits = sb1_audio_set_bits, |
| 942 | .set_channels = sb1_audio_set_channels |
| 943 | }; |
| 944 | |
| 945 | static struct audio_driver sb20_audio_driver = /* SB2.0 */ |
| 946 | { |
| 947 | .owner = THIS_MODULE, |
| 948 | .open = sb_audio_open, |
| 949 | .close = sb_audio_close, |
| 950 | .output_block = sb_set_output_parms, |
| 951 | .start_input = sb_set_input_parms, |
| 952 | .prepare_for_input = sb1_audio_prepare_for_input, |
| 953 | .prepare_for_output = sb1_audio_prepare_for_output, |
| 954 | .halt_io = sb1_audio_halt_xfer, |
| 955 | .trigger = sb20_audio_trigger, |
| 956 | .set_speed = sb1_audio_set_speed, |
| 957 | .set_bits = sb1_audio_set_bits, |
| 958 | .set_channels = sb1_audio_set_channels |
| 959 | }; |
| 960 | |
| 961 | static struct audio_driver sb201_audio_driver = /* SB2.01 */ |
| 962 | { |
| 963 | .owner = THIS_MODULE, |
| 964 | .open = sb_audio_open, |
| 965 | .close = sb_audio_close, |
| 966 | .output_block = sb_set_output_parms, |
| 967 | .start_input = sb_set_input_parms, |
| 968 | .prepare_for_input = sb1_audio_prepare_for_input, |
| 969 | .prepare_for_output = sb1_audio_prepare_for_output, |
| 970 | .halt_io = sb1_audio_halt_xfer, |
| 971 | .trigger = sb20_audio_trigger, |
| 972 | .set_speed = sb201_audio_set_speed, |
| 973 | .set_bits = sb1_audio_set_bits, |
| 974 | .set_channels = sb1_audio_set_channels |
| 975 | }; |
| 976 | |
| 977 | static struct audio_driver sbpro_audio_driver = /* SB Pro */ |
| 978 | { |
| 979 | .owner = THIS_MODULE, |
| 980 | .open = sb_audio_open, |
| 981 | .close = sb_audio_close, |
| 982 | .output_block = sb_set_output_parms, |
| 983 | .start_input = sb_set_input_parms, |
| 984 | .prepare_for_input = sbpro_audio_prepare_for_input, |
| 985 | .prepare_for_output = sbpro_audio_prepare_for_output, |
| 986 | .halt_io = sb1_audio_halt_xfer, |
| 987 | .trigger = sb20_audio_trigger, |
| 988 | .set_speed = sbpro_audio_set_speed, |
| 989 | .set_bits = sb1_audio_set_bits, |
| 990 | .set_channels = sbpro_audio_set_channels |
| 991 | }; |
| 992 | |
| 993 | static struct audio_driver jazz16_audio_driver = /* Jazz16 and SM Wave */ |
| 994 | { |
| 995 | .owner = THIS_MODULE, |
| 996 | .open = sb_audio_open, |
| 997 | .close = sb_audio_close, |
| 998 | .output_block = sb_set_output_parms, |
| 999 | .start_input = sb_set_input_parms, |
| 1000 | .prepare_for_input = sbpro_audio_prepare_for_input, |
| 1001 | .prepare_for_output = sbpro_audio_prepare_for_output, |
| 1002 | .halt_io = sb1_audio_halt_xfer, |
| 1003 | .trigger = sb20_audio_trigger, |
| 1004 | .set_speed = jazz16_audio_set_speed, |
| 1005 | .set_bits = sb16_audio_set_bits, |
| 1006 | .set_channels = sbpro_audio_set_channels |
| 1007 | }; |
| 1008 | |
| 1009 | static struct audio_driver sb16_audio_driver = /* SB16 */ |
| 1010 | { |
| 1011 | .owner = THIS_MODULE, |
| 1012 | .open = sb_audio_open, |
| 1013 | .close = sb_audio_close, |
| 1014 | .output_block = sb_set_output_parms, |
| 1015 | .start_input = sb_set_input_parms, |
| 1016 | .prepare_for_input = sb16_audio_prepare_for_input, |
| 1017 | .prepare_for_output = sb16_audio_prepare_for_output, |
| 1018 | .halt_io = sb1_audio_halt_xfer, |
| 1019 | .copy_user = sb16_copy_from_user, |
| 1020 | .trigger = sb16_audio_trigger, |
| 1021 | .set_speed = sb16_audio_set_speed, |
| 1022 | .set_bits = sb16_audio_set_bits, |
| 1023 | .set_channels = sbpro_audio_set_channels, |
| 1024 | .mmap = sb16_audio_mmap |
| 1025 | }; |
| 1026 | |
| 1027 | void sb_audio_init(sb_devc * devc, char *name, struct module *owner) |
| 1028 | { |
| 1029 | int audio_flags = 0; |
| 1030 | int format_mask = AFMT_U8; |
| 1031 | |
| 1032 | struct audio_driver *driver = &sb1_audio_driver; |
| 1033 | |
| 1034 | switch (devc->model) |
| 1035 | { |
| 1036 | case MDL_SB1: /* SB1.0 or SB 1.5 */ |
| 1037 | DDB(printk("Will use standard SB1.x driver\n")); |
| 1038 | audio_flags = DMA_HARDSTOP; |
| 1039 | break; |
| 1040 | |
| 1041 | case MDL_SB2: |
| 1042 | DDB(printk("Will use SB2.0 driver\n")); |
| 1043 | audio_flags = DMA_AUTOMODE; |
| 1044 | driver = &sb20_audio_driver; |
| 1045 | break; |
| 1046 | |
| 1047 | case MDL_SB201: |
| 1048 | DDB(printk("Will use SB2.01 (high speed) driver\n")); |
| 1049 | audio_flags = DMA_AUTOMODE; |
| 1050 | driver = &sb201_audio_driver; |
| 1051 | break; |
| 1052 | |
| 1053 | case MDL_JAZZ: |
| 1054 | case MDL_SMW: |
| 1055 | DDB(printk("Will use Jazz16 driver\n")); |
| 1056 | audio_flags = DMA_AUTOMODE; |
| 1057 | format_mask |= AFMT_S16_LE; |
| 1058 | driver = &jazz16_audio_driver; |
| 1059 | break; |
| 1060 | |
| 1061 | case MDL_ESS: |
| 1062 | DDB(printk("Will use ESS ES688/1688 driver\n")); |
| 1063 | driver = ess_audio_init (devc, &audio_flags, &format_mask); |
| 1064 | break; |
| 1065 | |
| 1066 | case MDL_SB16: |
| 1067 | DDB(printk("Will use SB16 driver\n")); |
| 1068 | audio_flags = DMA_AUTOMODE; |
| 1069 | format_mask |= AFMT_S16_LE; |
| 1070 | if (devc->dma8 != devc->dma16 && devc->dma16 != -1) |
| 1071 | { |
| 1072 | audio_flags |= DMA_DUPLEX; |
| 1073 | devc->duplex = 1; |
| 1074 | } |
| 1075 | driver = &sb16_audio_driver; |
| 1076 | break; |
| 1077 | |
| 1078 | default: |
| 1079 | DDB(printk("Will use SB Pro driver\n")); |
| 1080 | audio_flags = DMA_AUTOMODE; |
| 1081 | driver = &sbpro_audio_driver; |
| 1082 | } |
| 1083 | |
| 1084 | if (owner) |
| 1085 | driver->owner = owner; |
| 1086 | |
| 1087 | if ((devc->dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, |
| 1088 | name,driver, sizeof(struct audio_driver), |
| 1089 | audio_flags, format_mask, devc, |
| 1090 | devc->dma8, |
| 1091 | devc->duplex ? devc->dma16 : devc->dma8)) < 0) |
| 1092 | { |
| 1093 | printk(KERN_ERR "Sound Blaster: unable to install audio.\n"); |
| 1094 | return; |
| 1095 | } |
| 1096 | audio_devs[devc->dev]->mixer_dev = devc->my_mixerdev; |
| 1097 | audio_devs[devc->dev]->min_fragment = 5; |
| 1098 | } |