Russell King | a4e137a | 2005-08-18 10:06:59 +0100 | [diff] [blame] | 1 | # |
| 2 | # Multifunction miscellaneous devices |
| 3 | # |
| 4 | |
Randy Dunlap | 3827064 | 2010-05-11 01:07:34 +0200 | [diff] [blame] | 5 | menuconfig MFD_SUPPORT |
| 6 | bool "Multifunction device drivers" |
Martin Schwidefsky | e25df12 | 2007-05-10 15:45:57 +0200 | [diff] [blame] | 7 | depends on HAS_IOMEM |
Randy Dunlap | 3827064 | 2010-05-11 01:07:34 +0200 | [diff] [blame] | 8 | default y |
| 9 | help |
Samuel Ortiz | 15742c8 | 2010-06-19 02:29:24 +0200 | [diff] [blame] | 10 | Multifunction devices embed several functions (e.g. GPIOs, |
| 11 | touchscreens, keyboards, current regulators, power management chips, |
| 12 | etc...) in one single integrated circuit. They usually talk to the |
| 13 | main CPU through one or more IRQ lines and low speed data busses (SPI, |
| 14 | I2C, etc..). They appear as one single device to the main system |
| 15 | through the data bus and the MFD framework allows for sub devices |
| 16 | (a.k.a. functions) to appear as discrete platform devices. |
| 17 | MFDs are typically found on embedded platforms. |
| 18 | |
| 19 | This option alone does not add any kernel code. |
Randy Dunlap | 3827064 | 2010-05-11 01:07:34 +0200 | [diff] [blame] | 20 | |
| 21 | if MFD_SUPPORT |
Ben Dooks | b6d6454 | 2007-02-20 13:58:01 -0800 | [diff] [blame] | 22 | |
Dmitry Baryshkov | aa613de | 2008-06-27 10:37:19 +0100 | [diff] [blame] | 23 | config MFD_CORE |
| 24 | tristate |
| 25 | default n |
| 26 | |
Haojian Zhuang | 2cc50be | 2010-01-06 17:07:13 -0500 | [diff] [blame] | 27 | config MFD_88PM860X |
| 28 | bool "Support Marvell 88PM8606/88PM8607" |
Geert Uytterhoeven | 8d002bd | 2009-12-15 21:49:57 +0100 | [diff] [blame] | 29 | depends on I2C=y && GENERIC_HARDIRQS |
Haojian Zhuang | 2cc50be | 2010-01-06 17:07:13 -0500 | [diff] [blame] | 30 | select MFD_CORE |
| 31 | help |
| 32 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. |
| 33 | This includes the I2C driver and the core APIs _only_, you have to |
| 34 | select individual components like voltage regulators, RTC and |
| 35 | battery-charger under the corresponding menus. |
| 36 | |
Ben Dooks | b6d6454 | 2007-02-20 13:58:01 -0800 | [diff] [blame] | 37 | config MFD_SM501 |
| 38 | tristate "Support for Silicon Motion SM501" |
| 39 | ---help--- |
| 40 | This is the core driver for the Silicon Motion SM501 multimedia |
| 41 | companion chip. This device is a multifunction device which may |
Matt LaPlante | 01dd2fb | 2007-10-20 01:34:40 +0200 | [diff] [blame] | 42 | provide numerous interfaces including USB host controller, USB gadget, |
| 43 | asynchronous serial ports, audio functions, and a dual display video |
Ben Dooks | b6d6454 | 2007-02-20 13:58:01 -0800 | [diff] [blame] | 44 | interface. The device may be connected by PCI or local bus with |
| 45 | varying functions enabled. |
| 46 | |
Ben Dooks | f61be27 | 2008-07-25 01:45:59 -0700 | [diff] [blame] | 47 | config MFD_SM501_GPIO |
| 48 | bool "Export GPIO via GPIO layer" |
Samuel Ortiz | 2eedd60 | 2008-09-25 00:39:05 +0200 | [diff] [blame] | 49 | depends on MFD_SM501 && GPIOLIB |
Ben Dooks | f61be27 | 2008-07-25 01:45:59 -0700 | [diff] [blame] | 50 | ---help--- |
| 51 | This option uses the gpio library layer to export the 64 GPIO |
| 52 | lines on the SM501. The platform data is used to supply the |
| 53 | base number for the first GPIO line to register. |
| 54 | |
Samuel Ortiz | fa9ff4b | 2008-02-07 00:14:49 -0800 | [diff] [blame] | 55 | config MFD_ASIC3 |
| 56 | bool "Support for Compaq ASIC3" |
Samuel Ortiz | 2eedd60 | 2008-09-25 00:39:05 +0200 | [diff] [blame] | 57 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
Philipp Zabel | 9461f65 | 2009-06-15 12:10:24 +0200 | [diff] [blame] | 58 | select MFD_CORE |
Samuel Ortiz | fa9ff4b | 2008-02-07 00:14:49 -0800 | [diff] [blame] | 59 | ---help--- |
| 60 | This driver supports the ASIC3 multifunction chip found on many |
| 61 | PDAs (mainly iPAQ and HTC based ones) |
| 62 | |
Magnus Damm | a87d563 | 2009-10-02 02:22:09 +0000 | [diff] [blame] | 63 | config MFD_SH_MOBILE_SDHI |
| 64 | bool "Support for SuperH Mobile SDHI" |
Magnus Damm | 3d8ca8c | 2010-02-22 13:40:59 +0900 | [diff] [blame] | 65 | depends on SUPERH || ARCH_SHMOBILE |
Magnus Damm | a87d563 | 2009-10-02 02:22:09 +0000 | [diff] [blame] | 66 | select MFD_CORE |
Guennadi Liakhovetski | 311f3ac | 2010-05-19 18:34:22 +0000 | [diff] [blame] | 67 | select TMIO_MMC_DMA |
Magnus Damm | a87d563 | 2009-10-02 02:22:09 +0000 | [diff] [blame] | 68 | ---help--- |
| 69 | This driver supports the SDHI hardware block found in many |
| 70 | SuperH Mobile SoCs. |
| 71 | |
Miguel Aguilar | ca26308 | 2010-03-11 09:32:21 -0600 | [diff] [blame] | 72 | config MFD_DAVINCI_VOICECODEC |
| 73 | tristate |
| 74 | select MFD_CORE |
| 75 | |
David Brownell | 0931a4c | 2008-12-22 12:05:27 +0100 | [diff] [blame] | 76 | config MFD_DM355EVM_MSP |
| 77 | bool "DaVinci DM355 EVM microcontroller" |
Samuel Ortiz | 1819ebc | 2010-09-20 00:19:27 +0200 | [diff] [blame] | 78 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
David Brownell | 0931a4c | 2008-12-22 12:05:27 +0100 | [diff] [blame] | 79 | help |
| 80 | This driver supports the MSP430 microcontroller used on these |
| 81 | boards. MSP430 firmware manages resets and power sequencing, |
| 82 | inputs from buttons and the IR remote, LEDs, an RTC, and more. |
| 83 | |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 84 | config MFD_TI_SSP |
| 85 | tristate "TI Sequencer Serial Port support" |
| 86 | depends on ARCH_DAVINCI_TNETV107X |
| 87 | select MFD_CORE |
| 88 | ---help--- |
| 89 | Say Y here if you want support for the Sequencer Serial Port |
| 90 | in a Texas Instruments TNETV107X SoC. |
| 91 | |
| 92 | To compile this driver as a module, choose M here: the |
| 93 | module will be called ti-ssp. |
| 94 | |
Philipp Zabel | a1635b8 | 2008-04-09 19:20:34 +0100 | [diff] [blame] | 95 | config HTC_EGPIO |
| 96 | bool "HTC EGPIO support" |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 97 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
Philipp Zabel | a1635b8 | 2008-04-09 19:20:34 +0100 | [diff] [blame] | 98 | help |
| 99 | This driver supports the CPLD egpio chip present on |
| 100 | several HTC phones. It provides basic support for input |
| 101 | pins, output pins, and irqs. |
| 102 | |
Philipp Zabel | 5dc3339 | 2008-04-12 13:25:41 +0100 | [diff] [blame] | 103 | config HTC_PASIC3 |
| 104 | tristate "HTC PASIC3 LED/DS1WM chip support" |
Philipp Zabel | 0254a8f | 2009-02-17 10:06:45 +0100 | [diff] [blame] | 105 | select MFD_CORE |
Philipp Zabel | 5dc3339 | 2008-04-12 13:25:41 +0100 | [diff] [blame] | 106 | help |
| 107 | This core driver provides register access for the LED/DS1WM |
| 108 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and |
| 109 | HTC Magician devices, respectively. Actual functionality is |
| 110 | handled by the leds-pasic3 and ds1wm drivers. |
| 111 | |
Cory Maccarrone | 6048a3d | 2010-01-19 11:22:45 +0100 | [diff] [blame] | 112 | config HTC_I2CPLD |
| 113 | bool "HTC I2C PLD chip support" |
Randy Dunlap | bef3e20 | 2010-01-20 19:55:34 -0800 | [diff] [blame] | 114 | depends on I2C=y && GPIOLIB |
Cory Maccarrone | 6048a3d | 2010-01-19 11:22:45 +0100 | [diff] [blame] | 115 | help |
| 116 | If you say yes here you get support for the supposed CPLD |
| 117 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. |
| 118 | This device provides input and output GPIOs through an I2C |
| 119 | interface to one or more sub-chips. |
| 120 | |
Marek Vašut | d9105c2 | 2008-08-03 21:34:08 +0100 | [diff] [blame] | 121 | config UCB1400_CORE |
| 122 | tristate "Philips UCB1400 Core driver" |
Randy Dunlap | e483180 | 2008-10-15 13:29:07 +0200 | [diff] [blame] | 123 | depends on AC97_BUS |
Andrew Morton | 5a49a54 | 2008-10-15 13:30:47 +0200 | [diff] [blame] | 124 | depends on GPIOLIB |
Marek Vašut | d9105c2 | 2008-08-03 21:34:08 +0100 | [diff] [blame] | 125 | help |
| 126 | This enables support for the Philips UCB1400 core functions. |
| 127 | The UCB1400 is an AC97 audio codec. |
| 128 | |
| 129 | To compile this driver as a module, choose M here: the |
| 130 | module will be called ucb1400_core. |
| 131 | |
Linus Walleij | 798a8ee | 2011-03-09 13:02:38 +0100 | [diff] [blame] | 132 | config TPS6105X |
| 133 | tristate "TPS61050/61052 Boost Converters" |
| 134 | depends on I2C |
Linus Walleij | 2edd3b6 | 2011-03-09 12:02:55 +0000 | [diff] [blame] | 135 | select REGULATOR |
Guenter Roeck | fc498fa | 2011-03-24 12:12:47 -0700 | [diff] [blame] | 136 | select MFD_CORE |
Linus Walleij | 2edd3b6 | 2011-03-09 12:02:55 +0000 | [diff] [blame] | 137 | select REGULATOR_FIXED_VOLTAGE |
Linus Walleij | 798a8ee | 2011-03-09 13:02:38 +0100 | [diff] [blame] | 138 | help |
| 139 | This option enables a driver for the TP61050/TPS61052 |
| 140 | high-power "white LED driver". This boost converter is |
| 141 | sometimes used for other things than white LEDs, and |
| 142 | also contains a GPIO pin. |
| 143 | |
David Brownell | 87c1349 | 2008-12-22 12:16:27 +0100 | [diff] [blame] | 144 | config TPS65010 |
| 145 | tristate "TPS6501x Power Management chips" |
| 146 | depends on I2C && GPIOLIB |
| 147 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK |
| 148 | help |
| 149 | If you say yes here you get support for the TPS6501x series of |
| 150 | Power Management chips. These include voltage regulators, |
| 151 | lithium ion/polymer battery charging, and other features that |
| 152 | are often used in portable devices like cell phones and cameras. |
| 153 | |
| 154 | This driver can also be built as a module. If so, the module |
| 155 | will be called tps65010. |
| 156 | |
Todd Fischer | 31dd6a2 | 2010-04-08 09:04:55 +0200 | [diff] [blame] | 157 | config TPS6507X |
| 158 | tristate "TPS6507x Power Management / Touch Screen chips" |
| 159 | select MFD_CORE |
| 160 | depends on I2C |
| 161 | help |
| 162 | If you say yes here you get support for the TPS6507x series of |
| 163 | Power Management / Touch Screen chips. These include voltage |
| 164 | regulators, lithium ion/polymer battery charging, touch screen |
| 165 | and other features that are often used in portable devices. |
| 166 | This driver can also be built as a module. If so, the module |
| 167 | will be called tps6507x. |
| 168 | |
David Brownell | 88e75cc | 2008-12-22 12:18:02 +0100 | [diff] [blame] | 169 | config MENELAUS |
| 170 | bool "Texas Instruments TWL92330/Menelaus PM chip" |
Tony Lindgren | 088ef95 | 2010-02-12 12:26:47 -0800 | [diff] [blame] | 171 | depends on I2C=y && ARCH_OMAP2 |
David Brownell | 88e75cc | 2008-12-22 12:18:02 +0100 | [diff] [blame] | 172 | help |
| 173 | If you say yes here you get support for the Texas Instruments |
| 174 | TWL92330/Menelaus Power Management chip. This include voltage |
Matt LaPlante | 692105b | 2009-01-26 11:12:25 +0100 | [diff] [blame] | 175 | regulators, Dual slot memory card transceivers, real-time clock |
David Brownell | 88e75cc | 2008-12-22 12:18:02 +0100 | [diff] [blame] | 176 | and other features that are often used in portable devices like |
| 177 | cell phones and PDAs. |
| 178 | |
David Brownell | a603a7f | 2008-10-15 12:15:39 +0200 | [diff] [blame] | 179 | config TWL4030_CORE |
Balaji T K | e8deb28 | 2009-12-14 00:25:31 +0100 | [diff] [blame] | 180 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
David Brownell | 67460a7 | 2008-12-01 00:35:33 +0100 | [diff] [blame] | 181 | depends on I2C=y && GENERIC_HARDIRQS |
David Brownell | a603a7f | 2008-10-15 12:15:39 +0200 | [diff] [blame] | 182 | help |
Balaji T K | e8deb28 | 2009-12-14 00:25:31 +0100 | [diff] [blame] | 183 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
David Brownell | a603a7f | 2008-10-15 12:15:39 +0200 | [diff] [blame] | 184 | This core driver provides register access and IRQ handling |
| 185 | facilities, and registers devices for the various functions |
| 186 | so that function-specific drivers can bind to them. |
| 187 | |
| 188 | These multi-function chips are found on many OMAP2 and OMAP3 |
| 189 | boards, providing power management, RTC, GPIO, keypad, a |
| 190 | high speed USB OTG transceiver, an audio codec (on most |
| 191 | versions) and many other features. |
| 192 | |
Keerthy | f99c1d4 | 2011-03-01 19:12:26 +0530 | [diff] [blame] | 193 | config TWL4030_MADC |
| 194 | tristate "Texas Instruments TWL4030 MADC" |
| 195 | depends on TWL4030_CORE |
| 196 | help |
| 197 | This driver provides support for triton TWL4030-MADC. The |
| 198 | driver supports both RT and SW conversion methods. |
| 199 | |
| 200 | This driver can be built as a module. If so it will be |
| 201 | named twl4030-madc |
| 202 | |
Amit Kucheria | ebf0bd3 | 2009-08-31 18:32:18 +0200 | [diff] [blame] | 203 | config TWL4030_POWER |
| 204 | bool "Support power resources on TWL4030 family chips" |
| 205 | depends on TWL4030_CORE && ARM |
| 206 | help |
| 207 | Say yes here if you want to use the power resources on the |
| 208 | TWL4030 family chips. Most of these resources are regulators, |
| 209 | which have a separate driver; some are control signals, such |
| 210 | as clock request handshaking. |
| 211 | |
| 212 | This driver uses board-specific data to initialize the resources |
| 213 | and load scripts controling which resources are switched off/on |
| 214 | or reset when a sleep, wakeup or warm reset event occurs. |
| 215 | |
Peter Ujfalusi | 0b83dde | 2009-10-22 13:26:45 +0300 | [diff] [blame] | 216 | config TWL4030_CODEC |
| 217 | bool |
| 218 | depends on TWL4030_CORE |
| 219 | select MFD_CORE |
| 220 | default n |
| 221 | |
Hemanth V | 31fc03d | 2010-07-14 12:04:56 +0200 | [diff] [blame] | 222 | config TWL6030_PWM |
| 223 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" |
| 224 | depends on TWL4030_CORE |
| 225 | select HAVE_PWM |
| 226 | default n |
| 227 | help |
| 228 | Say yes here if you want support for TWL6030 PWM. |
| 229 | This is used to control charging LED brightness. |
| 230 | |
Rabin Vincent | 27e3499 | 2010-07-02 16:52:08 +0530 | [diff] [blame] | 231 | config MFD_STMPE |
| 232 | bool "Support STMicroelectronics STMPE" |
| 233 | depends on I2C=y && GENERIC_HARDIRQS |
| 234 | select MFD_CORE |
| 235 | help |
| 236 | Support for the STMPE family of I/O Expanders from |
| 237 | STMicroelectronics. |
| 238 | |
| 239 | Currently supported devices are: |
| 240 | |
| 241 | STMPE811: GPIO, Touchscreen |
| 242 | STMPE1601: GPIO, Keypad |
| 243 | STMPE2401: GPIO, Keypad |
| 244 | STMPE2403: GPIO, Keypad |
| 245 | |
| 246 | This driver provides common support for accessing the device, |
| 247 | additional drivers must be enabled in order to use the functionality |
| 248 | of the device. Currently available sub drivers are: |
| 249 | |
| 250 | GPIO: stmpe-gpio |
| 251 | Keypad: stmpe-keypad |
| 252 | Touchscreen: stmpe-ts |
| 253 | |
Sundar Iyer | f4e8afd | 2010-12-13 09:33:13 +0530 | [diff] [blame] | 254 | config MFD_TC3589X |
| 255 | bool "Support Toshiba TC35892 and variants" |
Rabin Vincent | b4ecd32 | 2010-05-10 23:39:47 +0200 | [diff] [blame] | 256 | depends on I2C=y && GENERIC_HARDIRQS |
| 257 | select MFD_CORE |
| 258 | help |
Sundar Iyer | f4e8afd | 2010-12-13 09:33:13 +0530 | [diff] [blame] | 259 | Support for the Toshiba TC35892 and variants I/O Expander. |
Rabin Vincent | b4ecd32 | 2010-05-10 23:39:47 +0200 | [diff] [blame] | 260 | |
| 261 | This driver provides common support for accessing the device, |
| 262 | additional drivers must be enabled in order to use the |
| 263 | functionality of the device. |
| 264 | |
Samuel Ortiz | 1c2c30a | 2008-08-05 19:27:58 +0200 | [diff] [blame] | 265 | config MFD_TMIO |
| 266 | bool |
| 267 | default n |
| 268 | |
Guennadi Liakhovetski | 311f3ac | 2010-05-19 18:34:22 +0000 | [diff] [blame] | 269 | config TMIO_MMC_DMA |
| 270 | bool |
| 271 | select DMA_ENGINE |
| 272 | select DMADEVICES |
| 273 | |
Ian Molton | 1f19201 | 2008-07-15 15:09:43 +0100 | [diff] [blame] | 274 | config MFD_T7L66XB |
| 275 | bool "Support Toshiba T7L66XB" |
Al Viro | 9ca6823 | 2008-11-01 18:19:59 +0000 | [diff] [blame] | 276 | depends on ARM && HAVE_CLK |
Ian Molton | 1f19201 | 2008-07-15 15:09:43 +0100 | [diff] [blame] | 277 | select MFD_CORE |
Samuel Ortiz | 1c2c30a | 2008-08-05 19:27:58 +0200 | [diff] [blame] | 278 | select MFD_TMIO |
Ian Molton | 1f19201 | 2008-07-15 15:09:43 +0100 | [diff] [blame] | 279 | help |
| 280 | Support for Toshiba Mobile IO Controller T7L66XB |
| 281 | |
Ian Molton | cbdfb42 | 2008-07-15 15:12:52 +0100 | [diff] [blame] | 282 | config MFD_TC6387XB |
| 283 | bool "Support Toshiba TC6387XB" |
Al Viro | 9ca6823 | 2008-11-01 18:19:59 +0000 | [diff] [blame] | 284 | depends on ARM && HAVE_CLK |
Ian Molton | cbdfb42 | 2008-07-15 15:12:52 +0100 | [diff] [blame] | 285 | select MFD_CORE |
Samuel Ortiz | 1c2c30a | 2008-08-05 19:27:58 +0200 | [diff] [blame] | 286 | select MFD_TMIO |
Ian Molton | cbdfb42 | 2008-07-15 15:12:52 +0100 | [diff] [blame] | 287 | help |
| 288 | Support for Toshiba Mobile IO Controller TC6387XB |
| 289 | |
Dmitry Baryshkov | d631594 | 2008-06-22 12:01:58 +0100 | [diff] [blame] | 290 | config MFD_TC6393XB |
| 291 | bool "Support Toshiba TC6393XB" |
Adrian Bunk | 8d25b36 | 2008-07-26 02:38:00 +0300 | [diff] [blame] | 292 | depends on GPIOLIB && ARM |
Dmitry Baryshkov | f024ff1 | 2008-06-27 10:37:57 +0100 | [diff] [blame] | 293 | select MFD_CORE |
Samuel Ortiz | 1c2c30a | 2008-08-05 19:27:58 +0200 | [diff] [blame] | 294 | select MFD_TMIO |
Dmitry Baryshkov | d631594 | 2008-06-22 12:01:58 +0100 | [diff] [blame] | 295 | help |
| 296 | Support for Toshiba Mobile IO Controller TC6393XB |
| 297 | |
Samuel Ortiz | 8e2eaab | 2008-10-24 17:10:05 +0200 | [diff] [blame] | 298 | config PMIC_DA903X |
| 299 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" |
| 300 | depends on I2C=y |
| 301 | help |
| 302 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a |
| 303 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC |
| 304 | usually found on PXA processors-based platforms. This includes |
| 305 | the I2C driver and the core APIs _only_, you have to select |
| 306 | individual components like LCD backlight, voltage regulators, |
| 307 | LEDs and battery-charger under the corresponding menus. |
| 308 | |
Michael Hennerich | a5736e0 | 2009-10-12 17:22:38 +0200 | [diff] [blame] | 309 | config PMIC_ADP5520 |
| 310 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" |
| 311 | depends on I2C=y |
| 312 | help |
| 313 | Say yes here to add support for Analog Devices AD5520 and ADP5501, |
| 314 | Multifunction Power Management IC. This includes |
| 315 | the I2C driver and the core APIs _only_, you have to select |
| 316 | individual components like LCD backlight, LEDs, GPIOs and Kepad |
| 317 | under the corresponding menus. |
| 318 | |
Haojian Zhuang | d50f8f3 | 2010-01-08 12:29:23 +0100 | [diff] [blame] | 319 | config MFD_MAX8925 |
Haojian Zhuang | 1f1cf8f | 2010-02-05 16:07:54 +0100 | [diff] [blame] | 320 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
Geert Uytterhoeven | 8d002bd | 2009-12-15 21:49:57 +0100 | [diff] [blame] | 321 | depends on I2C=y && GENERIC_HARDIRQS |
Haojian Zhuang | 1ad9989 | 2010-01-08 12:43:29 -0500 | [diff] [blame] | 322 | select MFD_CORE |
Haojian Zhuang | d50f8f3 | 2010-01-08 12:29:23 +0100 | [diff] [blame] | 323 | help |
| 324 | Say yes here to support for Maxim Semiconductor MAX8925. This is |
| 325 | a Power Management IC. This driver provies common support for |
| 326 | accessing the device, additional drivers must be enabled in order |
| 327 | to use the functionality of the device. |
| 328 | |
MyungJoo Ham | 527e7e9 | 2011-03-04 15:50:26 +0900 | [diff] [blame] | 329 | config MFD_MAX8997 |
| 330 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" |
| 331 | depends on I2C=y && GENERIC_HARDIRQS |
| 332 | select MFD_CORE |
| 333 | help |
| 334 | Say yes here to support for Maxim Semiconductor MAX8998/8966. |
| 335 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
| 336 | MUIC controls on chip. |
Randy Dunlap | d7e8c01 | 2011-03-14 11:28:37 +0100 | [diff] [blame] | 337 | This driver provides common support for accessing the device; |
MyungJoo Ham | 527e7e9 | 2011-03-04 15:50:26 +0900 | [diff] [blame] | 338 | additional drivers must be enabled in order to use the functionality |
| 339 | of the device. |
| 340 | |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 341 | config MFD_MAX8998 |
Kyungmin Park | f8539dd | 2010-08-23 13:46:49 +0900 | [diff] [blame] | 342 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
Joonyoung Shim | 2c7e6f5 | 2010-09-10 18:36:39 +0200 | [diff] [blame] | 343 | depends on I2C=y && GENERIC_HARDIRQS |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 344 | select MFD_CORE |
| 345 | help |
Kyungmin Park | f8539dd | 2010-08-23 13:46:49 +0900 | [diff] [blame] | 346 | Say yes here to support for Maxim Semiconductor MAX8998 and |
| 347 | National Semiconductor LP3974. This is a Power Management IC. |
| 348 | This driver provies common support for accessing the device, |
| 349 | additional drivers must be enabled in order to use the functionality |
| 350 | of the device. |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 351 | |
Mark Brown | 1d9f9f0 | 2008-09-10 18:58:42 +0100 | [diff] [blame] | 352 | config MFD_WM8400 |
| 353 | tristate "Support Wolfson Microelectronics WM8400" |
Mark Brown | b8380c1 | 2008-12-18 10:54:22 +0100 | [diff] [blame] | 354 | select MFD_CORE |
Mark Brown | 9c36645 | 2008-10-24 17:16:11 +0200 | [diff] [blame] | 355 | depends on I2C |
Mark Brown | 1d9f9f0 | 2008-09-10 18:58:42 +0100 | [diff] [blame] | 356 | help |
| 357 | Support for the Wolfson Microelecronics WM8400 PMIC and audio |
Mark Brown | 9e5aca5 | 2009-05-29 11:34:18 +0100 | [diff] [blame] | 358 | CODEC. This driver provides common support for accessing |
Mark Brown | 1d9f9f0 | 2008-09-10 18:58:42 +0100 | [diff] [blame] | 359 | the device, additional drivers must be enabled in order to use |
| 360 | the functionality of the device. |
| 361 | |
Mark Brown | b11062b | 2009-07-27 14:45:58 +0100 | [diff] [blame] | 362 | config MFD_WM831X |
Mark Brown | e5b4868 | 2010-10-19 23:57:56 +0200 | [diff] [blame] | 363 | bool |
| 364 | depends on GENERIC_HARDIRQS |
| 365 | |
| 366 | config MFD_WM831X_I2C |
| 367 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" |
Mark Brown | b11062b | 2009-07-27 14:45:58 +0100 | [diff] [blame] | 368 | select MFD_CORE |
Mark Brown | e5b4868 | 2010-10-19 23:57:56 +0200 | [diff] [blame] | 369 | select MFD_WM831X |
Geert Uytterhoeven | 8d002bd | 2009-12-15 21:49:57 +0100 | [diff] [blame] | 370 | depends on I2C=y && GENERIC_HARDIRQS |
Mark Brown | b11062b | 2009-07-27 14:45:58 +0100 | [diff] [blame] | 371 | help |
Mark Brown | e5b4868 | 2010-10-19 23:57:56 +0200 | [diff] [blame] | 372 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
| 373 | when controlled using I2C. This driver provides common support |
| 374 | for accessing the device, additional drivers must be enabled in |
| 375 | order to use the functionality of the device. |
Mark Brown | b11062b | 2009-07-27 14:45:58 +0100 | [diff] [blame] | 376 | |
Mark Brown | 2aa13b9 | 2010-10-20 00:00:11 +0200 | [diff] [blame] | 377 | config MFD_WM831X_SPI |
| 378 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" |
| 379 | select MFD_CORE |
| 380 | select MFD_WM831X |
| 381 | depends on SPI_MASTER && GENERIC_HARDIRQS |
| 382 | help |
| 383 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
| 384 | when controlled using SPI. This driver provides common support |
| 385 | for accessing the device, additional drivers must be enabled in |
| 386 | order to use the functionality of the device. |
| 387 | |
Mark Brown | 89b4012 | 2008-10-10 15:58:10 +0100 | [diff] [blame] | 388 | config MFD_WM8350 |
Mark Brown | ecf926b | 2010-01-05 20:40:47 +0000 | [diff] [blame] | 389 | bool |
Geert Uytterhoeven | 8d002bd | 2009-12-15 21:49:57 +0100 | [diff] [blame] | 390 | depends on GENERIC_HARDIRQS |
Mark Brown | 89b4012 | 2008-10-10 15:58:10 +0100 | [diff] [blame] | 391 | |
| 392 | config MFD_WM8350_CONFIG_MODE_0 |
| 393 | bool |
| 394 | depends on MFD_WM8350 |
| 395 | |
| 396 | config MFD_WM8350_CONFIG_MODE_1 |
| 397 | bool |
| 398 | depends on MFD_WM8350 |
| 399 | |
| 400 | config MFD_WM8350_CONFIG_MODE_2 |
| 401 | bool |
| 402 | depends on MFD_WM8350 |
| 403 | |
| 404 | config MFD_WM8350_CONFIG_MODE_3 |
| 405 | bool |
| 406 | depends on MFD_WM8350 |
| 407 | |
Mark Brown | ca23f8c | 2008-12-18 23:12:28 +0100 | [diff] [blame] | 408 | config MFD_WM8351_CONFIG_MODE_0 |
| 409 | bool |
| 410 | depends on MFD_WM8350 |
| 411 | |
| 412 | config MFD_WM8351_CONFIG_MODE_1 |
| 413 | bool |
| 414 | depends on MFD_WM8350 |
| 415 | |
| 416 | config MFD_WM8351_CONFIG_MODE_2 |
| 417 | bool |
| 418 | depends on MFD_WM8350 |
| 419 | |
| 420 | config MFD_WM8351_CONFIG_MODE_3 |
| 421 | bool |
| 422 | depends on MFD_WM8350 |
| 423 | |
Mark Brown | 9692063 | 2008-12-18 23:09:50 +0100 | [diff] [blame] | 424 | config MFD_WM8352_CONFIG_MODE_0 |
| 425 | bool |
| 426 | depends on MFD_WM8350 |
| 427 | |
| 428 | config MFD_WM8352_CONFIG_MODE_1 |
| 429 | bool |
| 430 | depends on MFD_WM8350 |
| 431 | |
| 432 | config MFD_WM8352_CONFIG_MODE_2 |
| 433 | bool |
| 434 | depends on MFD_WM8350 |
| 435 | |
| 436 | config MFD_WM8352_CONFIG_MODE_3 |
| 437 | bool |
| 438 | depends on MFD_WM8350 |
| 439 | |
Mark Brown | c661a0b | 2008-10-10 15:58:11 +0100 | [diff] [blame] | 440 | config MFD_WM8350_I2C |
Mark Brown | ecf926b | 2010-01-05 20:40:47 +0000 | [diff] [blame] | 441 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
Mark Brown | c661a0b | 2008-10-10 15:58:11 +0100 | [diff] [blame] | 442 | select MFD_WM8350 |
Geert Uytterhoeven | 8d002bd | 2009-12-15 21:49:57 +0100 | [diff] [blame] | 443 | depends on I2C=y && GENERIC_HARDIRQS |
Mark Brown | c661a0b | 2008-10-10 15:58:11 +0100 | [diff] [blame] | 444 | help |
| 445 | The WM8350 is an integrated audio and power management |
| 446 | subsystem with watchdog and RTC functionality for embedded |
| 447 | systems. This option enables core support for the WM8350 with |
| 448 | I2C as the control interface. Additional options must be |
| 449 | selected to enable support for the functionality of the chip. |
| 450 | |
Mark Brown | 9e50108 | 2010-01-29 18:20:29 +0000 | [diff] [blame] | 451 | config MFD_WM8994 |
Mark Brown | c9fbf7e | 2010-03-26 16:49:15 +0000 | [diff] [blame] | 452 | bool "Support Wolfson Microelectronics WM8994" |
Mark Brown | 9e50108 | 2010-01-29 18:20:29 +0000 | [diff] [blame] | 453 | select MFD_CORE |
Mark Brown | c9fbf7e | 2010-03-26 16:49:15 +0000 | [diff] [blame] | 454 | depends on I2C=y && GENERIC_HARDIRQS |
Mark Brown | 9e50108 | 2010-01-29 18:20:29 +0000 | [diff] [blame] | 455 | help |
| 456 | The WM8994 is a highly integrated hi-fi CODEC designed for |
| 457 | smartphone applicatiosn. As well as audio functionality it |
| 458 | has on board GPIO and regulator functionality which is |
| 459 | supported via the relevant subsystems. This driver provides |
| 460 | core support for the WM8994, in order to use the actual |
| 461 | functionaltiy of the device other drivers must be enabled. |
| 462 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 463 | config MFD_PCF50633 |
| 464 | tristate "Support for NXP PCF50633" |
| 465 | depends on I2C |
| 466 | help |
| 467 | Say yes here if you have NXP PCF50633 chip on your board. |
| 468 | This core driver provides register access and IRQ handling |
| 469 | facilities, and registers devices for the various functions |
| 470 | so that function-specific drivers can bind to them. |
| 471 | |
Sascha Hauer | 8238add | 2009-08-19 01:40:28 +0200 | [diff] [blame] | 472 | config MFD_MC13783 |
Uwe Kleine-König | 8e00593 | 2010-09-28 16:37:20 +0200 | [diff] [blame] | 473 | tristate |
| 474 | |
| 475 | config MFD_MC13XXX |
| 476 | tristate "Support Freescale MC13783 and MC13892" |
Sascha Hauer | 8238add | 2009-08-19 01:40:28 +0200 | [diff] [blame] | 477 | depends on SPI_MASTER |
| 478 | select MFD_CORE |
Uwe Kleine-König | 8e00593 | 2010-09-28 16:37:20 +0200 | [diff] [blame] | 479 | select MFD_MC13783 |
Sascha Hauer | 8238add | 2009-08-19 01:40:28 +0200 | [diff] [blame] | 480 | help |
Uwe Kleine-König | 8e00593 | 2010-09-28 16:37:20 +0200 | [diff] [blame] | 481 | Support for the Freescale (Atlas) PMIC and audio CODECs |
| 482 | MC13783 and MC13892. |
Sascha Hauer | 8238add | 2009-08-19 01:40:28 +0200 | [diff] [blame] | 483 | This driver provides common support for accessing the device, |
| 484 | additional drivers must be enabled in order to use the |
| 485 | functionality of the device. |
| 486 | |
Balaji Rao | 08c3e06 | 2009-01-09 01:49:26 +0100 | [diff] [blame] | 487 | config PCF50633_ADC |
| 488 | tristate "Support for NXP PCF50633 ADC" |
| 489 | depends on MFD_PCF50633 |
| 490 | help |
| 491 | Say yes here if you want to include support for ADC in the |
| 492 | NXP PCF50633 chip. |
| 493 | |
Balaji Rao | 6a3d119 | 2009-01-09 01:49:37 +0100 | [diff] [blame] | 494 | config PCF50633_GPIO |
| 495 | tristate "Support for NXP PCF50633 GPIO" |
| 496 | depends on MFD_PCF50633 |
| 497 | help |
| 498 | Say yes here if you want to include support GPIO for pins on |
| 499 | the PCF50633 chip. |
| 500 | |
Mattias Wallin | fa66125 | 2010-05-01 18:26:20 +0200 | [diff] [blame] | 501 | config ABX500_CORE |
| 502 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" |
Mattias Wallin | 47c1697 | 2010-09-10 17:47:56 +0200 | [diff] [blame] | 503 | default y if ARCH_U300 || ARCH_U8500 |
Mattias Wallin | fa66125 | 2010-05-01 18:26:20 +0200 | [diff] [blame] | 504 | help |
| 505 | Say yes here if you have the ABX500 Mixed Signal IC family |
| 506 | chips. This core driver expose register access functions. |
| 507 | Functionality specific drivers using these functions can |
| 508 | remain unchanged when IC changes. Binding of the functions to |
| 509 | actual register access is done by the IC core driver. |
| 510 | |
Linus Walleij | 14fa569 | 2009-05-21 23:17:06 +0200 | [diff] [blame] | 511 | config AB3100_CORE |
Linus Walleij | 2071db4 | 2010-01-19 11:41:52 +0100 | [diff] [blame] | 512 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
Mattias Wallin | fa66125 | 2010-05-01 18:26:20 +0200 | [diff] [blame] | 513 | depends on I2C=y && ABX500_CORE |
Linus Walleij | 8c96aef | 2010-08-20 10:27:12 +0200 | [diff] [blame] | 514 | select MFD_CORE |
Linus Walleij | 14fa569 | 2009-05-21 23:17:06 +0200 | [diff] [blame] | 515 | default y if ARCH_U300 |
| 516 | help |
| 517 | Select this to enable the AB3100 Mixed Signal IC core |
| 518 | functionality. This connects to a AB3100 on the I2C bus |
| 519 | and expose a number of symbols needed for dependent devices |
| 520 | to read and write registers and subscribe to events from |
| 521 | this multi-functional IC. This is needed to use other features |
| 522 | of the AB3100 such as battery-backed RTC, charging control, |
| 523 | LEDs, vibrator, system power and temperature, power management |
| 524 | and ALSA sound. |
| 525 | |
Linus Walleij | 12992dd | 2009-08-18 22:52:26 +0200 | [diff] [blame] | 526 | config AB3100_OTP |
| 527 | tristate "ST-Ericsson AB3100 OTP functions" |
| 528 | depends on AB3100_CORE |
| 529 | default y if AB3100_CORE |
| 530 | help |
| 531 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time |
| 532 | programmable memory) support. This exposes a sysfs file to read |
| 533 | out OTP values. |
| 534 | |
Daniel Ribeiro | 13a09f9 | 2009-05-28 15:43:37 -0300 | [diff] [blame] | 535 | config EZX_PCAP |
| 536 | bool "PCAP Support" |
| 537 | depends on GENERIC_HARDIRQS && SPI_MASTER |
| 538 | help |
| 539 | This enables the PCAP ASIC present on EZX Phones. This is |
| 540 | needed for MMC, TouchScreen, Sound, USB, etc.. |
| 541 | |
Rabin Vincent | 6257926 | 2010-05-19 11:39:02 +0200 | [diff] [blame] | 542 | config AB8500_CORE |
| 543 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" |
Sundar Iyer | 6680d94 | 2010-12-24 11:52:08 +0100 | [diff] [blame] | 544 | depends on GENERIC_HARDIRQS && ABX500_CORE |
Rabin Vincent | 6257926 | 2010-05-19 11:39:02 +0200 | [diff] [blame] | 545 | select MFD_CORE |
Srinidhi Kasagar | 0c41839 | 2009-10-12 17:11:52 +0200 | [diff] [blame] | 546 | help |
Rabin Vincent | 6257926 | 2010-05-19 11:39:02 +0200 | [diff] [blame] | 547 | Select this option to enable access to AB8500 power management |
Sundar Iyer | 6680d94 | 2010-12-24 11:52:08 +0100 | [diff] [blame] | 548 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
| 549 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds |
| 550 | the irq_chip parts for handling the Mixed Signal chip events. |
Srinidhi Kasagar | 0c41839 | 2009-10-12 17:11:52 +0200 | [diff] [blame] | 551 | This chip embeds various other multimedia funtionalities as well. |
| 552 | |
Mattias Wallin | 39368ed | 2010-09-15 13:12:03 +0200 | [diff] [blame] | 553 | config AB8500_I2C_CORE |
| 554 | bool "AB8500 register access via PRCMU I2C" |
| 555 | depends on AB8500_CORE && UX500_SOC_DB8500 |
| 556 | default y |
| 557 | help |
| 558 | This enables register access to the AB8500 chip via PRCMU I2C. |
| 559 | The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware |
| 560 | the I2C bus is connected to the Power Reset |
| 561 | and Mangagement Unit, PRCMU. |
| 562 | |
Mattias Wallin | 5814fc3 | 2010-09-13 16:05:04 +0200 | [diff] [blame] | 563 | config AB8500_DEBUG |
| 564 | bool "Enable debug info via debugfs" |
| 565 | depends on AB8500_CORE && DEBUG_FS |
| 566 | default y if DEBUG_FS |
| 567 | help |
| 568 | Select this option if you want debug information using the debug |
| 569 | filesystem, debugfs. |
| 570 | |
Arun Murthy | dae2db3 | 2011-02-22 10:11:13 +0100 | [diff] [blame] | 571 | config AB8500_GPADC |
| 572 | bool "AB8500 GPADC driver" |
| 573 | depends on AB8500_CORE && REGULATOR_AB8500 |
| 574 | default y |
| 575 | help |
| 576 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage |
| 577 | |
Mattias Wallin | 09bcb3f | 2010-05-11 00:25:29 +0200 | [diff] [blame] | 578 | config AB3550_CORE |
| 579 | bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" |
| 580 | select MFD_CORE |
| 581 | depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE |
| 582 | help |
| 583 | Select this to enable the AB3550 Mixed Signal IC core |
| 584 | functionality. This connects to a AB3550 on the I2C bus |
| 585 | and expose a number of symbols needed for dependent devices |
| 586 | to read and write registers and subscribe to events from |
| 587 | this multi-functional IC. This is needed to use other features |
| 588 | of the AB3550 such as battery-backed RTC, charging control, |
| 589 | LEDs, vibrator, system power and temperature, power management |
| 590 | and ALSA sound. |
| 591 | |
Andres Salomon | f71e1af | 2010-11-26 11:52:35 +0100 | [diff] [blame] | 592 | config MFD_CS5535 |
| 593 | tristate "Support for CS5535 and CS5536 southbridge core functions" |
| 594 | select MFD_CORE |
Andres Salomon | 15b7cf1 | 2011-03-27 21:26:03 -0700 | [diff] [blame] | 595 | depends on PCI && X86 |
Andres Salomon | f71e1af | 2010-11-26 11:52:35 +0100 | [diff] [blame] | 596 | ---help--- |
| 597 | This is the core driver for CS5535/CS5536 MFD functions. This is |
| 598 | necessary for using the board's GPIO and MFGPT functionality. |
| 599 | |
Richard Röjfors | 8edbede | 2010-02-04 08:18:52 -0300 | [diff] [blame] | 600 | config MFD_TIMBERDALE |
| 601 | tristate "Support for the Timberdale FPGA" |
| 602 | select MFD_CORE |
Randy Dunlap | 546e29b6 | 2010-02-12 12:30:55 -0300 | [diff] [blame] | 603 | depends on PCI && GPIOLIB |
Richard Röjfors | 8edbede | 2010-02-04 08:18:52 -0300 | [diff] [blame] | 604 | ---help--- |
| 605 | This is the core driver for the timberdale FPGA. This device is a |
| 606 | multifunction device which exposes numerous platform devices. |
| 607 | |
| 608 | The timberdale FPGA can be found on the Intel Atom development board |
| 609 | for in-vehicle infontainment, called Russellville. |
Denis Turischev | e82c60a | 2010-02-19 11:26:25 +0100 | [diff] [blame] | 610 | |
| 611 | config LPC_SCH |
| 612 | tristate "Intel SCH LPC" |
| 613 | depends on PCI |
| 614 | select MFD_CORE |
| 615 | help |
| 616 | LPC bridge function of the Intel SCH provides support for |
| 617 | System Management Bus and General Purpose I/O. |
| 618 | |
Florian Fainelli | e090d50 | 2010-03-21 01:06:05 +0100 | [diff] [blame] | 619 | config MFD_RDC321X |
| 620 | tristate "Support for RDC-R321x southbridge" |
| 621 | select MFD_CORE |
| 622 | depends on PCI |
| 623 | help |
| 624 | Say yes here if you want to have support for the RDC R-321x SoC |
| 625 | southbridge which provides access to GPIOs and Watchdog using the |
| 626 | southbridge PCI device configuration space. |
| 627 | |
Ira W. Snyder | bd35813 | 2010-04-07 09:43:00 +0200 | [diff] [blame] | 628 | config MFD_JANZ_CMODIO |
| 629 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" |
| 630 | select MFD_CORE |
| 631 | depends on PCI |
| 632 | help |
| 633 | This is the core driver for the Janz CMOD-IO PCI MODULbus |
| 634 | carrier board. This device is a PCI to MODULbus bridge which may |
| 635 | host many different types of MODULbus daughterboards, including |
| 636 | CAN and GPIO controllers. |
| 637 | |
Lars-Peter Clausen | 91f4deb | 2010-07-12 03:48:08 +0200 | [diff] [blame] | 638 | config MFD_JZ4740_ADC |
| 639 | tristate "Support for the JZ4740 SoC ADC core" |
| 640 | select MFD_CORE |
| 641 | depends on MACH_JZ4740 |
| 642 | help |
| 643 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. |
| 644 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. |
| 645 | |
Mike Rapoport | c6c1933 | 2010-08-11 01:11:04 +0200 | [diff] [blame] | 646 | config MFD_TPS6586X |
Gary King | c26448c | 2010-09-20 00:18:27 +0200 | [diff] [blame] | 647 | bool "TPS6586x Power Management chips" |
| 648 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS |
Mike Rapoport | c6c1933 | 2010-08-11 01:11:04 +0200 | [diff] [blame] | 649 | select MFD_CORE |
| 650 | help |
| 651 | If you say yes here you get support for the TPS6586X series of |
| 652 | Power Management chips. |
| 653 | This driver provides common support for accessing the device, |
| 654 | additional drivers must be enabled in order to use the |
| 655 | functionality of the device. |
| 656 | |
| 657 | This driver can also be built as a module. If so, the module |
| 658 | will be called tps6586x. |
| 659 | |
Daniel Drake | 375fc77 | 2010-09-30 21:55:41 +0100 | [diff] [blame] | 660 | config MFD_VX855 |
| 661 | tristate "Support for VIA VX855/VX875 integrated south bridge" |
| 662 | depends on PCI |
| 663 | select MFD_CORE |
| 664 | help |
| 665 | Say yes here to enable support for various functions of the |
| 666 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi |
| 667 | and/or vx855_gpio drivers for this to do anything useful. |
| 668 | |
Matti Aaltonen | 383268a | 2010-12-10 11:41:33 -0300 | [diff] [blame] | 669 | config MFD_WL1273_CORE |
Matti Aaltonen | 94fd5b7 | 2011-03-01 10:10:35 -0300 | [diff] [blame] | 670 | tristate "Support for TI WL1273 FM radio." |
Matti Aaltonen | 383268a | 2010-12-10 11:41:33 -0300 | [diff] [blame] | 671 | depends on I2C |
| 672 | select MFD_CORE |
| 673 | default n |
| 674 | help |
| 675 | This is the core driver for the TI WL1273 FM radio. This MFD |
| 676 | driver connects the radio-wl1273 V4L2 module and the wl1273 |
| 677 | audio codec. |
| 678 | |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 679 | config MFD_OMAP_USB_HOST |
| 680 | bool "Support OMAP USBHS core driver" |
| 681 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 |
| 682 | default y |
| 683 | help |
| 684 | This is the core driver for the OAMP EHCI and OHCI drivers. |
| 685 | This MFD driver does the required setup functionalities for |
| 686 | OMAP USB Host drivers. |
| 687 | |
Randy Dunlap | 3827064 | 2010-05-11 01:07:34 +0200 | [diff] [blame] | 688 | endif # MFD_SUPPORT |
Ben Dooks | b6d6454 | 2007-02-20 13:58:01 -0800 | [diff] [blame] | 689 | |
Russell King | a4e137a | 2005-08-18 10:06:59 +0100 | [diff] [blame] | 690 | menu "Multimedia Capabilities Port drivers" |
Adrian Bunk | f751d50 | 2006-03-24 03:18:21 -0800 | [diff] [blame] | 691 | depends on ARCH_SA1100 |
Russell King | a4e137a | 2005-08-18 10:06:59 +0100 | [diff] [blame] | 692 | |
| 693 | config MCP |
| 694 | tristate |
| 695 | |
Russell King | 5e742ad | 2005-08-18 10:08:15 +0100 | [diff] [blame] | 696 | # Interface drivers |
| 697 | config MCP_SA11X0 |
| 698 | tristate "Support SA11x0 MCP interface" |
| 699 | depends on ARCH_SA1100 |
| 700 | select MCP |
| 701 | |
Russell King | 05c45ca | 2005-09-11 10:26:31 +0100 | [diff] [blame] | 702 | # Chip drivers |
| 703 | config MCP_UCB1200 |
| 704 | tristate "Support for UCB1200 / UCB1300" |
| 705 | depends on MCP |
| 706 | |
Russell King | acb4543 | 2005-09-11 10:26:57 +0100 | [diff] [blame] | 707 | config MCP_UCB1200_TS |
| 708 | tristate "Touchscreen interface support" |
| 709 | depends on MCP_UCB1200 && INPUT |
| 710 | |
Russell King | a4e137a | 2005-08-18 10:06:59 +0100 | [diff] [blame] | 711 | endmenu |