blob: 1b94daa615845f50f185328b2ecf3326f71bdffa [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * IPWireless 3G UMTS TDD Modem driver (USB connected)
3 *
4 * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
5 * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * All information about the device was acquired using SnoopyPro
13 * on MSFT's O/S, and examing the MSFT drivers' debug output
14 * (insanely left _on_ in the enduser version)
15 *
16 * It was written out of frustration with the IPWireless USB modem
17 * supplied by Axity3G/Sentech South Africa not supporting
18 * Linux whatsoever.
19 *
20 * Nobody provided any proprietary information that was not already
21 * available for this device.
22 *
23 * The modem adheres to the "3GPP TS 27.007 AT command set for 3G
24 * User Equipment (UE)" standard, available from
25 * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
26 *
27 * The code was only tested the IPWireless handheld modem distributed
28 * in South Africa by Sentech.
29 *
30 * It may work for Woosh Inc in .nz too, as it appears they use the
31 * same kit.
32 *
33 * There is still some work to be done in terms of handling
34 * DCD, DTR, RTS, CTS which are currently faked.
35 * It's good enough for PPP at this point. It's based off all kinds of
36 * code found in usb/serial and usb/class
37 *
38 */
39
40#include <linux/kernel.h>
41#include <linux/errno.h>
42#include <linux/init.h>
43#include <linux/slab.h>
44#include <linux/tty.h>
45#include <linux/tty_flip.h>
46#include <linux/module.h>
47#include <linux/spinlock.h>
48#include <linux/usb.h>
Greg Kroah-Hartmana9698882006-07-11 21:22:58 -070049#include <linux/usb/serial.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070050#include <asm/uaccess.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070051
52/*
53 * Version Information
54 */
55#define DRIVER_VERSION "v0.3"
56#define DRIVER_AUTHOR "Roelf Diedericks"
57#define DRIVER_DESC "IPWireless tty driver"
58
59#define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */
60#define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */
61
62#define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */
63
64
65/* Message sizes */
66#define EVENT_BUFFER_SIZE 0xFF
67#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
68#define NUM_BULK_URBS 24
69#define NUM_CONTROL_URBS 16
70
71/* vendor/product pairs that are known work with this driver*/
72#define IPW_VID 0x0bc3
73#define IPW_PID 0x0001
74
75
76/* Vendor commands: */
77
78/* baud rates */
79enum {
80 ipw_sio_b256000 = 0x000e,
81 ipw_sio_b128000 = 0x001d,
82 ipw_sio_b115200 = 0x0020,
83 ipw_sio_b57600 = 0x0040,
84 ipw_sio_b56000 = 0x0042,
85 ipw_sio_b38400 = 0x0060,
86 ipw_sio_b19200 = 0x00c0,
87 ipw_sio_b14400 = 0x0100,
88 ipw_sio_b9600 = 0x0180,
89 ipw_sio_b4800 = 0x0300,
90 ipw_sio_b2400 = 0x0600,
91 ipw_sio_b1200 = 0x0c00,
92 ipw_sio_b600 = 0x1800
93};
94
95/* data bits */
96#define ipw_dtb_7 0x700
97#define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1
98 // I mean, is there a point to any other setting these days? :)
99
100/* usb control request types : */
101#define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off)
102#define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx
103#define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x
104#define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx
105#define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0
106#define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open)
107#define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge
108#define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes
109#define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes,
110 // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
111
112/* values used for request IPW_SIO_SET_PIN */
113#define IPW_PIN_SETDTR 0x101
114#define IPW_PIN_SETRTS 0x202
115#define IPW_PIN_CLRDTR 0x100
116#define IPW_PIN_CLRRTS 0x200 // unconfirmed
117
118/* values used for request IPW_SIO_RXCTL */
119#define IPW_RXBULK_ON 1
120#define IPW_RXBULK_OFF 0
121
122/* various 16 byte hardcoded transferbuffers used by flow control */
123#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
124
125/* Interpretation of modem status lines */
126/* These need sorting out by individually connecting pins and checking
127 * results. FIXME!
128 * When data is being sent we see 0x30 in the lower byte; this must
129 * contain DSR and CTS ...
130 */
131#define IPW_DSR ((1<<4) | (1<<5))
132#define IPW_CTS ((1<<5) | (1<<4))
133
134#define IPW_WANTS_TO_SEND 0x30
135//#define IPW_DTR /* Data Terminal Ready */
136//#define IPW_CTS /* Clear To Send */
137//#define IPW_CD /* Carrier Detect */
138//#define IPW_DSR /* Data Set Ready */
139//#define IPW_RxD /* Receive pin */
140
141//#define IPW_LE
142//#define IPW_RTS
143//#define IPW_ST
144//#define IPW_SR
145//#define IPW_RI /* Ring Indicator */
146
147static struct usb_device_id usb_ipw_ids[] = {
148 { USB_DEVICE(IPW_VID, IPW_PID) },
149 { },
150};
151
152MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
153
154static struct usb_driver usb_ipw_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700155 .name = "ipwtty",
156 .probe = usb_serial_probe,
157 .disconnect = usb_serial_disconnect,
158 .id_table = usb_ipw_ids,
Greg Kroah-Hartmanba9dc652005-11-16 13:41:28 -0800159 .no_dynamic_id = 1,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700160};
161
162static int debug;
163
David Howells7d12e782006-10-05 14:55:46 +0100164static void ipw_read_bulk_callback(struct urb *urb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165{
166 struct usb_serial_port *port = urb->context;
167 unsigned char *data = urb->transfer_buffer;
168 struct tty_struct *tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 int result;
Greg Kroah-Hartmanb4a15792007-06-15 15:44:13 -0700170 int status = urb->status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171
172 dbg("%s - port %d", __FUNCTION__, port->number);
173
Greg Kroah-Hartmanb4a15792007-06-15 15:44:13 -0700174 if (status) {
175 dbg("%s - nonzero read bulk status received: %d",
176 __FUNCTION__, status);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177 return;
178 }
179
180 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
181
182 tty = port->tty;
183 if (tty && urb->actual_length) {
Alan Cox33f0f882006-01-09 20:54:13 -0800184 tty_buffer_request_room(tty, urb->actual_length);
185 tty_insert_flip_string(tty, data, urb->actual_length);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186 tty_flip_buffer_push(tty);
187 }
188
189 /* Continue trying to always read */
190 usb_fill_bulk_urb (port->read_urb, port->serial->dev,
191 usb_rcvbulkpipe(port->serial->dev,
192 port->bulk_in_endpointAddress),
193 port->read_urb->transfer_buffer,
194 port->read_urb->transfer_buffer_length,
195 ipw_read_bulk_callback, port);
196 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
197 if (result)
198 dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
199 return;
200}
201
202static int ipw_open(struct usb_serial_port *port, struct file *filp)
203{
204 struct usb_device *dev = port->serial->dev;
205 u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
206 u8 *buf_flow_init;
207 int result;
208
209 dbg("%s", __FUNCTION__);
210
Eric Sesterhenn5d7efe52006-10-26 21:06:24 +0200211 buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212 if (!buf_flow_init)
213 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214
215 if (port->tty)
216 port->tty->low_latency = 1;
217
218 /* --1: Tell the modem to initialize (we think) From sniffs this is always the
219 * first thing that gets sent to the modem during opening of the device */
220 dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
221 result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
222 IPW_SIO_INIT,
223 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
224 0,
225 0, /* index */
226 NULL,
227 0,
228 100000);
229 if (result < 0)
230 dev_err(&port->dev, "Init of modem failed (error = %d)", result);
231
232 /* reset the bulk pipes */
233 usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
234 usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
235
236 /*--2: Start reading from the device */
237 dbg("%s: setting up bulk read callback",__FUNCTION__);
238 usb_fill_bulk_urb(port->read_urb, dev,
239 usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
240 port->bulk_in_buffer,
241 port->bulk_in_size,
242 ipw_read_bulk_callback, port);
243 result = usb_submit_urb(port->read_urb, GFP_KERNEL);
244 if (result < 0)
245 dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
246
247 /*--3: Tell the modem to open the floodgates on the rx bulk channel */
248 dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
249 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
250 IPW_SIO_RXCTL,
251 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
252 IPW_RXBULK_ON,
253 0, /* index */
254 NULL,
255 0,
256 100000);
257 if (result < 0)
258 dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
259
260 /*--4: setup the initial flowcontrol */
261 dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
262 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
263 IPW_SIO_HANDFLOW,
264 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
265 0,
266 0,
267 buf_flow_init,
268 0x10,
269 200000);
270 if (result < 0)
271 dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
272
273
274 /*--5: raise the dtr */
275 dbg("%s:raising dtr",__FUNCTION__);
276 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
277 IPW_SIO_SET_PIN,
278 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
279 IPW_PIN_SETDTR,
280 0,
281 NULL,
282 0,
283 200000);
284 if (result < 0)
285 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
286
287 /*--6: raise the rts */
288 dbg("%s:raising rts",__FUNCTION__);
289 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
290 IPW_SIO_SET_PIN,
291 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
292 IPW_PIN_SETRTS,
293 0,
294 NULL,
295 0,
296 200000);
297 if (result < 0)
298 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
299
300 kfree(buf_flow_init);
301 return 0;
302}
303
304static void ipw_close(struct usb_serial_port *port, struct file * filp)
305{
306 struct usb_device *dev = port->serial->dev;
307 int result;
308
309 if (tty_hung_up_p(filp)) {
310 dbg("%s: tty_hung_up_p ...", __FUNCTION__);
311 return;
312 }
313
314 /*--1: drop the dtr */
315 dbg("%s:dropping dtr",__FUNCTION__);
316 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
317 IPW_SIO_SET_PIN,
318 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
319 IPW_PIN_CLRDTR,
320 0,
321 NULL,
322 0,
323 200000);
324 if (result < 0)
325 dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
326
327 /*--2: drop the rts */
328 dbg("%s:dropping rts",__FUNCTION__);
329 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
330 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
331 IPW_PIN_CLRRTS,
332 0,
333 NULL,
334 0,
335 200000);
336 if (result < 0)
337 dev_err(&port->dev, "dropping rts failed (error = %d)", result);
338
339
340 /*--3: purge */
341 dbg("%s:sending purge",__FUNCTION__);
342 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
343 IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
344 0x03,
345 0,
346 NULL,
347 0,
348 200000);
349 if (result < 0)
350 dev_err(&port->dev, "purge failed (error = %d)", result);
351
352
353 /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
354 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
355 IPW_SIO_RXCTL,
356 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
357 IPW_RXBULK_OFF,
358 0, /* index */
359 NULL,
360 0,
361 100000);
362
363 if (result < 0)
364 dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
365
366 /* shutdown any in-flight urbs that we know about */
367 usb_kill_urb(port->read_urb);
368 usb_kill_urb(port->write_urb);
369}
370
David Howells7d12e782006-10-05 14:55:46 +0100371static void ipw_write_bulk_callback(struct urb *urb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372{
373 struct usb_serial_port *port = urb->context;
Greg Kroah-Hartmanb4a15792007-06-15 15:44:13 -0700374 int status = urb->status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375
376 dbg("%s", __FUNCTION__);
377
Bart Oldemanb2f1b0d2006-07-02 15:07:10 +1200378 port->write_urb_busy = 0;
379
Greg Kroah-Hartmanb4a15792007-06-15 15:44:13 -0700380 if (status)
381 dbg("%s - nonzero write bulk status received: %d",
382 __FUNCTION__, status);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383
Pete Zaitcevcf2c7482006-05-22 21:58:49 -0700384 usb_serial_port_softint(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385}
386
387static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
388{
389 struct usb_device *dev = port->serial->dev;
390 int ret;
391
392 dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
393 count, in_interrupt() );
394
395 if (count == 0) {
396 dbg("%s - write request of 0 bytes", __FUNCTION__);
397 return 0;
398 }
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700399
Peter Zijlstrae81ee632006-09-25 12:51:41 +0200400 spin_lock_bh(&port->lock);
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700401 if (port->write_urb_busy) {
Peter Zijlstrae81ee632006-09-25 12:51:41 +0200402 spin_unlock_bh(&port->lock);
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700403 dbg("%s - already writing", __FUNCTION__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404 return 0;
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700405 }
406 port->write_urb_busy = 1;
Peter Zijlstrae81ee632006-09-25 12:51:41 +0200407 spin_unlock_bh(&port->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408
409 count = min(count, port->bulk_out_size);
410 memcpy(port->bulk_out_buffer, buf, count);
411
412 dbg("%s count now:%d", __FUNCTION__, count);
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700413
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414 usb_fill_bulk_urb(port->write_urb, dev,
415 usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
416 port->write_urb->transfer_buffer,
417 count,
418 ipw_write_bulk_callback,
419 port);
420
421 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
422 if (ret != 0) {
Greg Kroah-Hartman507ca9b2005-04-23 12:49:16 -0700423 port->write_urb_busy = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
425 return ret;
426 }
427
428 dbg("%s returning %d", __FUNCTION__, count);
429 return count;
430}
431
432static int ipw_probe(struct usb_serial_port *port)
433{
434 return 0;
435}
436
437static int ipw_disconnect(struct usb_serial_port *port)
438{
439 usb_set_serial_port_data(port, NULL);
440 return 0;
441}
442
Greg Kroah-Hartmanea653702005-06-20 21:15:16 -0700443static struct usb_serial_driver ipw_device = {
Greg Kroah-Hartman18fcac32005-06-20 21:15:16 -0700444 .driver = {
445 .owner = THIS_MODULE,
Greg Kroah-Hartman269bda12005-06-20 21:15:16 -0700446 .name = "ipw",
Greg Kroah-Hartman18fcac32005-06-20 21:15:16 -0700447 },
Greg Kroah-Hartman269bda12005-06-20 21:15:16 -0700448 .description = "IPWireless converter",
Johannes Hölzld9b1b782006-12-17 21:50:24 +0100449 .usb_driver = &usb_ipw_driver,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450 .id_table = usb_ipw_ids,
451 .num_interrupt_in = NUM_DONT_CARE,
452 .num_bulk_in = 1,
453 .num_bulk_out = 1,
454 .num_ports = 1,
455 .open = ipw_open,
456 .close = ipw_close,
457 .port_probe = ipw_probe,
458 .port_remove = ipw_disconnect,
459 .write = ipw_write,
460 .write_bulk_callback = ipw_write_bulk_callback,
461 .read_bulk_callback = ipw_read_bulk_callback,
462};
463
464
465
466static int usb_ipw_init(void)
467{
468 int retval;
469
470 retval = usb_serial_register(&ipw_device);
471 if (retval)
472 return retval;
473 retval = usb_register(&usb_ipw_driver);
474 if (retval) {
475 usb_serial_deregister(&ipw_device);
476 return retval;
477 }
478 info(DRIVER_DESC " " DRIVER_VERSION);
479 return 0;
480}
481
482static void usb_ipw_exit(void)
483{
484 usb_deregister(&usb_ipw_driver);
485 usb_serial_deregister(&ipw_device);
486}
487
488module_init(usb_ipw_init);
489module_exit(usb_ipw_exit);
490
491/* Module information */
492MODULE_AUTHOR( DRIVER_AUTHOR );
493MODULE_DESCRIPTION( DRIVER_DESC );
494MODULE_LICENSE("GPL");
495
496module_param(debug, bool, S_IRUGO | S_IWUSR);
497MODULE_PARM_DESC(debug, "Debug enabled or not");