blob: fbf965b31c14b3cacf165a4b9f82c6e5a667508d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -07002# PCCARD (PCMCIA/CardBus) bus subsystem configuration
Linus Torvalds1da177e2005-04-16 15:20:36 -07003#
4
Jan Engelhardt42c53232007-10-16 01:23:48 -07005menuconfig PCCARD
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 tristate "PCCard (PCMCIA/CardBus) support"
Andrew Morton135c2942006-07-10 04:43:48 -07007 depends on HOTPLUG
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 ---help---
9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
10 computer. These are credit-card size devices such as network cards,
11 modems or hard drives often used with laptops computers. There are
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070012 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
13 CardBus cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -070014
15 To compile this driver as modules, choose M here: the
16 module will be called pcmcia_core.
17
18if PCCARD
19
20config PCMCIA_DEBUG
21 bool "Enable PCCARD debugging"
22 help
23 Say Y here to enable PCMCIA subsystem debugging. You
24 will need to choose the debugging level either via the
25 kernel command line, or module options depending whether
26 you build the PCMCIA as modules.
27
28 The kernel command line options are:
29 pcmcia_core.pc_debug=N
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070030 pcmcia.pc_debug=N
Linus Torvalds1da177e2005-04-16 15:20:36 -070031 sa11xx_core.pc_debug=N
32
33 The module option is called pc_debug=N
34
35 In all the above examples, N is the debugging verbosity
36 level.
37
38config PCMCIA
39 tristate "16-bit PCMCIA support"
Dominik Brodowskif861bd22005-06-27 16:28:57 -070040 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 default y
42 ---help---
43 This option enables support for 16-bit PCMCIA cards. Most older
44 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
45 only using 32-bit CardBus cards, say Y or M here.
46
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070047 To use 16-bit PCMCIA cards, you will need supporting software in
48 most cases. (see the file <file:Documentation/Changes> for
49 location and details).
Linus Torvalds1da177e2005-04-16 15:20:36 -070050
51 To compile this driver as modules, choose M here: the
52 module will be called pcmcia.
53
54 If unsure, say Y.
55
Dominik Brodowskidaa95172005-06-27 16:28:14 -070056config PCMCIA_LOAD_CIS
57 bool "Load CIS updates from userspace (EXPERIMENTAL)"
58 depends on PCMCIA && EXPERIMENTAL
59 select FW_LOADER
60 default y
61 help
62 Some PCMCIA cards require an updated Card Information Structure (CIS)
63 to be loaded from userspace to work correctly. If you say Y here,
64 and your userspace is arranged correctly, this will be loaded
65 automatically using the in-kernel firmware loader and the hotplug
66 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
67
68 If unsure, say Y.
69
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070070config PCMCIA_IOCTL
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070071 bool "PCMCIA control ioctl (obsolete)"
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070072 depends on PCMCIA
73 default y
74 help
75 If you say Y here, the deprecated ioctl interface to the PCMCIA
76 subsystem will be built. It is needed by cardmgr and cardctl
77 (pcmcia-cs) to function properly.
78
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070079 You should use the new pcmciautils package instead (see
80 <file:Documentation/Changes> for location and details).
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070081
82 If unsure, say Y.
83
Linus Torvalds1da177e2005-04-16 15:20:36 -070084config CARDBUS
85 bool "32-bit CardBus support"
86 depends on PCI
87 default y
88 ---help---
89 CardBus is a bus mastering architecture for PC-cards, which allows
90 for 32 bit PC-cards (the original PCMCIA standard specifies only
91 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
92
93 To use 32 bit PC-cards, you also need a CardBus compatible host
94 bridge. Virtually all modern PCMCIA bridges do this, and most of
95 them are "yenta-compatible", so say Y or M there, too.
96
97 If unsure, say Y.
98
99comment "PC-card bridges"
100
101config YENTA
102 tristate "CardBus yenta-compatible bridge support"
Dominik Brodowski89b39f52005-07-07 17:59:09 -0700103 depends on PCI
104 select CARDBUS if !EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 select PCCARD_NONSTATIC
106 ---help---
107 This option enables support for CardBus host bridges. Virtually
108 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
109 the hardware inside your computer that PCMCIA cards are plugged
110 into.
111
112 To compile this driver as modules, choose M here: the
113 module will be called yenta_socket.
114
115 If unsure, say Y.
116
Daniel Ritz63e7ebd2005-11-03 21:12:14 +0100117config YENTA_O2
118 default y
119 bool "Special initialization for O2Micro bridges" if EMBEDDED
120 depends on YENTA
121
122config YENTA_RICOH
123 default y
124 bool "Special initialization for Ricoh bridges" if EMBEDDED
125 depends on YENTA
126
127config YENTA_TI
128 default y
129 bool "Special initialization for TI and EnE bridges" if EMBEDDED
130 depends on YENTA
131
132config YENTA_ENE_TUNE
133 default y
134 bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
135 depends on YENTA_TI && CARDBUS
136
137config YENTA_TOSHIBA
138 default y
139 bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
140 depends on YENTA
141
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142config PD6729
143 tristate "Cirrus PD6729 compatible bridge support"
144 depends on PCMCIA && PCI
145 select PCCARD_NONSTATIC
146 help
147 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
148 device, found in some older laptops and PCMCIA card readers.
149
150config I82092
151 tristate "i82092 compatible bridge support"
152 depends on PCMCIA && PCI
153 select PCCARD_NONSTATIC
154 help
155 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
156 found in some older laptops and more commonly in evaluation boards for the
157 chip.
158
159config I82365
160 tristate "i82365 compatible bridge support"
161 depends on PCMCIA && ISA
162 select PCCARD_NONSTATIC
163 help
164 Say Y here to include support for ISA-bus PCMCIA host bridges that
165 are register compatible with the Intel i82365. These are found on
166 older laptops and ISA-bus card readers for desktop systems. A
167 "bridge" is the hardware inside your computer that PCMCIA cards are
168 plugged into. If unsure, say N.
169
170config TCIC
171 tristate "Databook TCIC host bridge support"
Komuro81000802005-09-24 23:12:40 -0700172 depends on PCMCIA && ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173 select PCCARD_NONSTATIC
174 help
175 Say Y here to include support for the Databook TCIC family of PCMCIA
176 host bridges. These are only found on a handful of old systems.
177 "Bridge" is the name used for the hardware inside your computer that
178 PCMCIA cards are plugged into. If unsure, say N.
179
Marcelo Tosattide957c82005-10-28 17:46:13 -0700180config PCMCIA_M8XX
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700181 tristate "MPC8xx PCMCIA support"
182 depends on PCMCIA && PPC && 8xx
183 select PCCARD_IODYN
184 select PCCARD_NONSTATIC
185 help
186 Say Y here to include support for PowerPC 8xx series PCMCIA
187 controller.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700188
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700189 This driver is also available as a module called m8xx_pcmcia.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700190
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191config PCMCIA_AU1X00
192 tristate "Au1x00 pcmcia support"
193 depends on SOC_AU1X00 && PCMCIA
194
195config PCMCIA_SA1100
196 tristate "SA1100 support"
197 depends on ARM && ARCH_SA1100 && PCMCIA
198 help
199 Say Y here to include support for SA11x0-based PCMCIA or CF
200 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
201 Xscale(R) embedded machines.
202
203 This driver is also available as a module called sa1100_cs.
204
205config PCMCIA_SA1111
206 tristate "SA1111 support"
207 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
208 help
209 Say Y here to include support for SA1111-based PCMCIA or CF
210 sockets, found on the Jornada 720, Graphicsmaster and other
211 StrongARM(R)/Xscale(R) embedded machines.
212
213 This driver is also available as a module called sa1111_cs.
214
215config PCMCIA_PXA2XX
216 tristate "PXA2xx support"
217 depends on ARM && ARCH_PXA && PCMCIA
Marek VaĊĦut35978402008-07-07 17:28:59 +0100218 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
Russell Kingcc513ac2008-10-07 19:08:32 +0100219 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
Jonathan Cameron5aeb1a52009-05-12 19:37:21 +0000220 || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221 help
222 Say Y here to include support for the PXA2xx PCMCIA controller
223
224config PCMCIA_PROBE
225 bool
Dominik Brodowski6423efa2005-12-11 20:47:44 +0100226 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227
228config M32R_PCC
229 bool "M32R PCMCIA I/F"
230 depends on M32R && CHIP_M32700 && PCMCIA
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700231 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232 help
233 Say Y here to use the M32R PCMCIA controller.
234
235config M32R_CFC
236 bool "M32R CF I/F Controller"
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700237 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
238 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239 help
240 Say Y here to use the M32R CompactFlash controller.
241
242config M32R_CFC_NUM
243 int "M32R CF I/F number"
244 depends on M32R_CFC
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700245 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246 help
247 Set the number of M32R CF slots.
248
249config PCMCIA_VRC4171
250 tristate "NEC VRC4171 Card Controllers support"
Yoichi Yuasadaaeb722006-04-06 15:08:29 +0900251 depends on CPU_VR41XX && ISA && PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252
253config PCMCIA_VRC4173
254 tristate "NEC VRC4173 CARDU support"
255 depends on CPU_VR41XX && PCI && PCMCIA
256
David Brownellf74e48a2005-09-09 13:03:28 -0700257config OMAP_CF
258 tristate "OMAP CompactFlash Controller"
259 depends on PCMCIA && ARCH_OMAP16XX
260 help
261 Say Y here to support the CompactFlash controller on OMAP.
262 Note that this doesn't support "True IDE" mode.
263
Michael Hennerich785e8212008-06-11 09:06:16 +0200264config BFIN_CFPCMCIA
265 tristate "Blackfin CompactFlash PCMCIA Driver"
266 depends on PCMCIA && BLACKFIN
267 help
268 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
269
270
Andrew Victor2c1f3b72006-02-21 12:56:52 +0200271config AT91_CF
272 tristate "AT91 CompactFlash Controller"
273 depends on PCMCIA && ARCH_AT91RM9200
274 help
275 Say Y here to support the CompactFlash controller on AT91 chips.
276 Or choose M to compile the driver as a module named "at91_cf".
277
Olof Johansson2b571a02007-10-16 23:26:20 -0700278config ELECTRA_CF
279 tristate "Electra CompactFlash Controller"
280 depends on PCMCIA && PPC_PASEMI
281 help
282 Say Y here to support the CompactFlash controller on the
283 PA Semi Electra eval board.
284
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285config PCCARD_NONSTATIC
286 tristate
287
Dominik Brodowski3b27e942005-12-07 12:32:20 +0100288config PCCARD_IODYN
289 bool
290
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291endif # PCCARD