blob: c0d13d65091333555f118f5c16f386a955b500cf [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*------------------------------------------------------------------------
2 . smc9194.c
3 . This is a driver for SMC's 9000 series of Ethernet cards.
4 .
5 . Copyright (C) 1996 by Erik Stahlman
6 . This software may be used and distributed according to the terms
7 . of the GNU General Public License, incorporated herein by reference.
8 .
9 . "Features" of the SMC chip:
10 . 4608 byte packet memory. ( for the 91C92. Others have more )
11 . EEPROM for configuration
12 . AUI/TP selection ( mine has 10Base2/10BaseT select )
13 .
14 . Arguments:
15 . io = for the base address
16 . irq = for the IRQ
17 . ifport = 0 for autodetect, 1 for TP, 2 for AUI ( or 10base2 )
18 .
19 . author:
20 . Erik Stahlman ( erik@vt.edu )
21 . contributors:
22 . Arnaldo Carvalho de Melo <acme@conectiva.com.br>
23 .
24 . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
25 .
26 . Sources:
27 . o SMC databook
28 . o skeleton.c by Donald Becker ( becker@scyld.com )
29 . o ( a LOT of advice from Becker as well )
30 .
31 . History:
32 . 12/07/95 Erik Stahlman written, got receive/xmit handled
33 . 01/03/96 Erik Stahlman worked out some bugs, actually usable!!! :-)
34 . 01/06/96 Erik Stahlman cleaned up some, better testing, etc
35 . 01/29/96 Erik Stahlman fixed autoirq, added multicast
36 . 02/01/96 Erik Stahlman 1. disabled all interrupts in smc_reset
37 . 2. got rid of post-decrementing bug -- UGH.
38 . 02/13/96 Erik Stahlman Tried to fix autoirq failure. Added more
39 . descriptive error messages.
40 . 02/15/96 Erik Stahlman Fixed typo that caused detection failure
41 . 02/23/96 Erik Stahlman Modified it to fit into kernel tree
42 . Added support to change hardware address
43 . Cleared stats on opens
44 . 02/26/96 Erik Stahlman Trial support for Kernel 1.2.13
45 . Kludge for automatic IRQ detection
46 . 03/04/96 Erik Stahlman Fixed kernel 1.3.70 +
47 . Fixed bug reported by Gardner Buchanan in
48 . smc_enable, with outw instead of outb
49 . 03/06/96 Erik Stahlman Added hardware multicast from Peter Cammaert
50 . 04/14/00 Heiko Pruessing (SMA Regelsysteme) Fixed bug in chip memory
51 . allocation
52 . 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
53 . 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
54 . 11/08/01 Matt Domsch Use common crc32 function
55 ----------------------------------------------------------------------------*/
56
57static const char version[] =
58 "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
59
60#include <linux/module.h>
61#include <linux/kernel.h>
62#include <linux/types.h>
63#include <linux/fcntl.h>
64#include <linux/interrupt.h>
65#include <linux/ioport.h>
66#include <linux/in.h>
67#include <linux/slab.h>
68#include <linux/string.h>
69#include <linux/init.h>
70#include <linux/crc32.h>
71#include <linux/errno.h>
72#include <linux/netdevice.h>
73#include <linux/etherdevice.h>
74#include <linux/skbuff.h>
75#include <linux/bitops.h>
76
77#include <asm/io.h>
78
79#include "smc9194.h"
80
81#define DRV_NAME "smc9194"
82
83/*------------------------------------------------------------------------
84 .
85 . Configuration options, for the experienced user to change.
86 .
87 -------------------------------------------------------------------------*/
88
89/*
90 . Do you want to use 32 bit xfers? This should work on all chips, as
91 . the chipset is designed to accommodate them.
92*/
93#ifdef __sh__
94#undef USE_32_BIT
95#else
96#define USE_32_BIT 1
97#endif
98
99#if defined(__H8300H__) || defined(__H8300S__)
100#define NO_AUTOPROBE
101#undef insl
102#undef outsl
103#define insl(a,b,l) io_insl_noswap(a,b,l)
104#define outsl(a,b,l) io_outsl_noswap(a,b,l)
105#endif
106
107/*
108 .the SMC9194 can be at any of the following port addresses. To change,
109 .for a slightly different card, you can add it to the array. Keep in
110 .mind that the array must end in zero.
111*/
112
113struct devlist {
114 unsigned int port;
115 unsigned int irq;
116};
117
118#if defined(CONFIG_H8S_EDOSK2674)
119static struct devlist smc_devlist[] __initdata = {
120 {.port = 0xf80000, .irq = 16},
121 {.port = 0, .irq = 0 },
122};
123#else
124static struct devlist smc_devlist[] __initdata = {
125 {.port = 0x200, .irq = 0},
126 {.port = 0x220, .irq = 0},
127 {.port = 0x240, .irq = 0},
128 {.port = 0x260, .irq = 0},
129 {.port = 0x280, .irq = 0},
130 {.port = 0x2A0, .irq = 0},
131 {.port = 0x2C0, .irq = 0},
132 {.port = 0x2E0, .irq = 0},
133 {.port = 0x300, .irq = 0},
134 {.port = 0x320, .irq = 0},
135 {.port = 0x340, .irq = 0},
136 {.port = 0x360, .irq = 0},
137 {.port = 0x380, .irq = 0},
138 {.port = 0x3A0, .irq = 0},
139 {.port = 0x3C0, .irq = 0},
140 {.port = 0x3E0, .irq = 0},
141 {.port = 0, .irq = 0},
142};
143#endif
144/*
145 . Wait time for memory to be free. This probably shouldn't be
146 . tuned that much, as waiting for this means nothing else happens
147 . in the system
148*/
149#define MEMORY_WAIT_TIME 16
150
151/*
152 . DEBUGGING LEVELS
153 .
154 . 0 for normal operation
155 . 1 for slightly more details
156 . >2 for various levels of increasingly useless information
157 . 2 for interrupt tracking, status flags
158 . 3 for packet dumps, etc.
159*/
160#define SMC_DEBUG 0
161
162#if (SMC_DEBUG > 2 )
163#define PRINTK3(x) printk x
164#else
165#define PRINTK3(x)
166#endif
167
168#if SMC_DEBUG > 1
169#define PRINTK2(x) printk x
170#else
171#define PRINTK2(x)
172#endif
173
174#ifdef SMC_DEBUG
175#define PRINTK(x) printk x
176#else
177#define PRINTK(x)
178#endif
179
180
181/*------------------------------------------------------------------------
182 .
183 . The internal workings of the driver. If you are changing anything
184 . here with the SMC stuff, you should have the datasheet and known
185 . what you are doing.
186 .
187 -------------------------------------------------------------------------*/
188#define CARDNAME "SMC9194"
189
190
191/* store this information for the driver.. */
192struct smc_local {
193 /*
194 these are things that the kernel wants me to keep, so users
195 can find out semi-useless statistics of how well the card is
196 performing
197 */
198 struct net_device_stats stats;
199
200 /*
201 If I have to wait until memory is available to send
202 a packet, I will store the skbuff here, until I get the
203 desired memory. Then, I'll send it out and free it.
204 */
205 struct sk_buff * saved_skb;
206
207 /*
208 . This keeps track of how many packets that I have
209 . sent out. When an TX_EMPTY interrupt comes, I know
210 . that all of these have been sent.
211 */
212 int packets_waiting;
213};
214
215
216/*-----------------------------------------------------------------
217 .
218 . The driver can be entered at any of the following entry points.
219 .
220 .------------------------------------------------------------------ */
221
222/*
223 . This is called by register_netdev(). It is responsible for
224 . checking the portlist for the SMC9000 series chipset. If it finds
225 . one, then it will initialize the device, find the hardware information,
226 . and sets up the appropriate device parameters.
227 . NOTE: Interrupts are *OFF* when this procedure is called.
228 .
229 . NB:This shouldn't be static since it is referred to externally.
230*/
231struct net_device *smc_init(int unit);
232
233/*
234 . The kernel calls this function when someone wants to use the device,
235 . typically 'ifconfig ethX up'.
236*/
237static int smc_open(struct net_device *dev);
238
239/*
240 . Our watchdog timed out. Called by the networking layer
241*/
242static void smc_timeout(struct net_device *dev);
243
244/*
245 . This is called by the kernel in response to 'ifconfig ethX down'. It
246 . is responsible for cleaning up everything that the open routine
247 . does, and maybe putting the card into a powerdown state.
248*/
249static int smc_close(struct net_device *dev);
250
251/*
252 . This routine allows the proc file system to query the driver's
253 . statistics.
254*/
255static struct net_device_stats * smc_query_statistics( struct net_device *dev);
256
257/*
258 . Finally, a call to set promiscuous mode ( for TCPDUMP and related
259 . programs ) and multicast modes.
260*/
261static void smc_set_multicast_list(struct net_device *dev);
262
263
264/*---------------------------------------------------------------
265 .
266 . Interrupt level calls..
267 .
268 ----------------------------------------------------------------*/
269
270/*
271 . Handles the actual interrupt
272*/
David Howells7d12e782006-10-05 14:55:46 +0100273static irqreturn_t smc_interrupt(int irq, void *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274/*
275 . This is a separate procedure to handle the receipt of a packet, to
276 . leave the interrupt code looking slightly cleaner
277*/
278static inline void smc_rcv( struct net_device *dev );
279/*
280 . This handles a TX interrupt, which is only called when an error
281 . relating to a packet is sent.
282*/
283static inline void smc_tx( struct net_device * dev );
284
285/*
286 ------------------------------------------------------------
287 .
288 . Internal routines
289 .
290 ------------------------------------------------------------
291*/
292
293/*
294 . Test if a given location contains a chip, trying to cause as
295 . little damage as possible if it's not a SMC chip.
296*/
297static int smc_probe(struct net_device *dev, int ioaddr);
298
299/*
300 . A rather simple routine to print out a packet for debugging purposes.
301*/
302#if SMC_DEBUG > 2
303static void print_packet( byte *, int );
304#endif
305
306#define tx_done(dev) 1
307
308/* this is called to actually send the packet to the chip */
309static void smc_hardware_send_packet( struct net_device * dev );
310
311/* Since I am not sure if I will have enough room in the chip's ram
312 . to store the packet, I call this routine, which either sends it
313 . now, or generates an interrupt when the card is ready for the
314 . packet */
315static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device *dev );
316
317/* this does a soft reset on the device */
318static void smc_reset( int ioaddr );
319
320/* Enable Interrupts, Receive, and Transmit */
321static void smc_enable( int ioaddr );
322
323/* this puts the device in an inactive state */
324static void smc_shutdown( int ioaddr );
325
326/* This routine will find the IRQ of the driver if one is not
327 . specified in the input to the device. */
328static int smc_findirq( int ioaddr );
329
330/*
331 . Function: smc_reset( int ioaddr )
332 . Purpose:
333 . This sets the SMC91xx chip to its normal state, hopefully from whatever
334 . mess that any other DOS driver has put it in.
335 .
336 . Maybe I should reset more registers to defaults in here? SOFTRESET should
337 . do that for me.
338 .
339 . Method:
340 . 1. send a SOFT RESET
341 . 2. wait for it to finish
342 . 3. enable autorelease mode
343 . 4. reset the memory management unit
344 . 5. clear all interrupts
345 .
346*/
347static void smc_reset( int ioaddr )
348{
349 /* This resets the registers mostly to defaults, but doesn't
350 affect EEPROM. That seems unnecessary */
351 SMC_SELECT_BANK( 0 );
352 outw( RCR_SOFTRESET, ioaddr + RCR );
353
354 /* this should pause enough for the chip to be happy */
355 SMC_DELAY( );
356
357 /* Set the transmit and receive configuration registers to
358 default values */
359 outw( RCR_CLEAR, ioaddr + RCR );
360 outw( TCR_CLEAR, ioaddr + TCR );
361
362 /* set the control register to automatically
363 release successfully transmitted packets, to make the best
364 use out of our limited memory */
365 SMC_SELECT_BANK( 1 );
366 outw( inw( ioaddr + CONTROL ) | CTL_AUTO_RELEASE , ioaddr + CONTROL );
367
368 /* Reset the MMU */
369 SMC_SELECT_BANK( 2 );
370 outw( MC_RESET, ioaddr + MMU_CMD );
371
372 /* Note: It doesn't seem that waiting for the MMU busy is needed here,
373 but this is a place where future chipsets _COULD_ break. Be wary
374 of issuing another MMU command right after this */
375
376 outb( 0, ioaddr + INT_MASK );
377}
378
379/*
380 . Function: smc_enable
381 . Purpose: let the chip talk to the outside work
382 . Method:
383 . 1. Enable the transmitter
384 . 2. Enable the receiver
385 . 3. Enable interrupts
386*/
387static void smc_enable( int ioaddr )
388{
389 SMC_SELECT_BANK( 0 );
390 /* see the header file for options in TCR/RCR NORMAL*/
391 outw( TCR_NORMAL, ioaddr + TCR );
392 outw( RCR_NORMAL, ioaddr + RCR );
393
394 /* now, enable interrupts */
395 SMC_SELECT_BANK( 2 );
396 outb( SMC_INTERRUPT_MASK, ioaddr + INT_MASK );
397}
398
399/*
400 . Function: smc_shutdown
401 . Purpose: closes down the SMC91xxx chip.
402 . Method:
403 . 1. zero the interrupt mask
404 . 2. clear the enable receive flag
405 . 3. clear the enable xmit flags
406 .
407 . TODO:
408 . (1) maybe utilize power down mode.
409 . Why not yet? Because while the chip will go into power down mode,
410 . the manual says that it will wake up in response to any I/O requests
411 . in the register space. Empirical results do not show this working.
412*/
413static void smc_shutdown( int ioaddr )
414{
415 /* no more interrupts for me */
416 SMC_SELECT_BANK( 2 );
417 outb( 0, ioaddr + INT_MASK );
418
419 /* and tell the card to stay away from that nasty outside world */
420 SMC_SELECT_BANK( 0 );
421 outb( RCR_CLEAR, ioaddr + RCR );
422 outb( TCR_CLEAR, ioaddr + TCR );
423#if 0
424 /* finally, shut the chip down */
425 SMC_SELECT_BANK( 1 );
426 outw( inw( ioaddr + CONTROL ), CTL_POWERDOWN, ioaddr + CONTROL );
427#endif
428}
429
430
431/*
432 . Function: smc_setmulticast( int ioaddr, int count, dev_mc_list * adds )
433 . Purpose:
434 . This sets the internal hardware table to filter out unwanted multicast
435 . packets before they take up memory.
436 .
437 . The SMC chip uses a hash table where the high 6 bits of the CRC of
438 . address are the offset into the table. If that bit is 1, then the
439 . multicast packet is accepted. Otherwise, it's dropped silently.
440 .
441 . To use the 6 bits as an offset into the table, the high 3 bits are the
442 . number of the 8 bit register, while the low 3 bits are the bit within
443 . that register.
444 .
445 . This routine is based very heavily on the one provided by Peter Cammaert.
446*/
447
448
449static void smc_setmulticast( int ioaddr, int count, struct dev_mc_list * addrs ) {
450 int i;
451 unsigned char multicast_table[ 8 ];
452 struct dev_mc_list * cur_addr;
453 /* table for flipping the order of 3 bits */
454 unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
455
456 /* start with a table of all zeros: reject all */
457 memset( multicast_table, 0, sizeof( multicast_table ) );
458
459 cur_addr = addrs;
460 for ( i = 0; i < count ; i ++, cur_addr = cur_addr->next ) {
461 int position;
462
463 /* do we have a pointer here? */
464 if ( !cur_addr )
465 break;
466 /* make sure this is a multicast address - shouldn't this
467 be a given if we have it here ? */
468 if ( !( *cur_addr->dmi_addr & 1 ) )
469 continue;
470
471 /* only use the low order bits */
472 position = ether_crc_le(6, cur_addr->dmi_addr) & 0x3f;
473
474 /* do some messy swapping to put the bit in the right spot */
475 multicast_table[invert3[position&7]] |=
476 (1<<invert3[(position>>3)&7]);
477
478 }
479 /* now, the table can be loaded into the chipset */
480 SMC_SELECT_BANK( 3 );
481
482 for ( i = 0; i < 8 ; i++ ) {
483 outb( multicast_table[i], ioaddr + MULTICAST1 + i );
484 }
485}
486
487/*
488 . Function: smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * )
489 . Purpose:
490 . Attempt to allocate memory for a packet, if chip-memory is not
491 . available, then tell the card to generate an interrupt when it
492 . is available.
493 .
494 . Algorithm:
495 .
496 . o if the saved_skb is not currently null, then drop this packet
497 . on the floor. This should never happen, because of TBUSY.
498 . o if the saved_skb is null, then replace it with the current packet,
499 . o See if I can sending it now.
500 . o (NO): Enable interrupts and let the interrupt handler deal with it.
501 . o (YES):Send it now.
502*/
503static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * dev )
504{
505 struct smc_local *lp = netdev_priv(dev);
506 unsigned int ioaddr = dev->base_addr;
507 word length;
508 unsigned short numPages;
509 word time_out;
510
511 netif_stop_queue(dev);
512 /* Well, I want to send the packet.. but I don't know
513 if I can send it right now... */
514
515 if ( lp->saved_skb) {
516 /* THIS SHOULD NEVER HAPPEN. */
517 lp->stats.tx_aborted_errors++;
518 printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
519 return 1;
520 }
521 lp->saved_skb = skb;
522
523 length = skb->len;
524
525 if (length < ETH_ZLEN) {
Herbert Xu5b057c62006-06-23 02:06:41 -0700526 if (skb_padto(skb, ETH_ZLEN)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700527 netif_wake_queue(dev);
528 return 0;
529 }
530 length = ETH_ZLEN;
531 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400532
Linus Torvalds1da177e2005-04-16 15:20:36 -0700533 /*
534 ** The MMU wants the number of pages to be the number of 256 bytes
535 ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
536 **
537 ** Pkt size for allocating is data length +6 (for additional status words,
538 ** length and ctl!) If odd size last byte is included in this header.
539 */
540 numPages = ((length & 0xfffe) + 6) / 256;
541
542 if (numPages > 7 ) {
543 printk(CARDNAME": Far too big packet error. \n");
544 /* freeing the packet is a good thing here... but should
545 . any packets of this size get down here? */
546 dev_kfree_skb (skb);
547 lp->saved_skb = NULL;
548 /* this IS an error, but, i don't want the skb saved */
549 netif_wake_queue(dev);
550 return 0;
551 }
552 /* either way, a packet is waiting now */
553 lp->packets_waiting++;
554
555 /* now, try to allocate the memory */
556 SMC_SELECT_BANK( 2 );
557 outw( MC_ALLOC | numPages, ioaddr + MMU_CMD );
558 /*
559 . Performance Hack
560 .
561 . wait a short amount of time.. if I can send a packet now, I send
562 . it now. Otherwise, I enable an interrupt and wait for one to be
563 . available.
564 .
565 . I could have handled this a slightly different way, by checking to
566 . see if any memory was available in the FREE MEMORY register. However,
567 . either way, I need to generate an allocation, and the allocation works
568 . no matter what, so I saw no point in checking free memory.
569 */
570 time_out = MEMORY_WAIT_TIME;
571 do {
572 word status;
573
574 status = inb( ioaddr + INTERRUPT );
575 if ( status & IM_ALLOC_INT ) {
576 /* acknowledge the interrupt */
577 outb( IM_ALLOC_INT, ioaddr + INTERRUPT );
578 break;
579 }
580 } while ( -- time_out );
581
582 if ( !time_out ) {
583 /* oh well, wait until the chip finds memory later */
584 SMC_ENABLE_INT( IM_ALLOC_INT );
585 PRINTK2((CARDNAME": memory allocation deferred. \n"));
586 /* it's deferred, but I'll handle it later */
587 return 0;
588 }
589 /* or YES! I can send the packet now.. */
590 smc_hardware_send_packet(dev);
591 netif_wake_queue(dev);
592 return 0;
593}
594
595/*
596 . Function: smc_hardware_send_packet(struct net_device * )
597 . Purpose:
598 . This sends the actual packet to the SMC9xxx chip.
599 .
600 . Algorithm:
601 . First, see if a saved_skb is available.
602 . ( this should NOT be called if there is no 'saved_skb'
603 . Now, find the packet number that the chip allocated
604 . Point the data pointers at it in memory
605 . Set the length word in the chip's memory
606 . Dump the packet to chip memory
607 . Check if a last byte is needed ( odd length packet )
608 . if so, set the control flag right
609 . Tell the card to send it
610 . Enable the transmit interrupt, so I know if it failed
611 . Free the kernel data if I actually sent it.
612*/
613static void smc_hardware_send_packet( struct net_device * dev )
614{
615 struct smc_local *lp = netdev_priv(dev);
616 byte packet_no;
617 struct sk_buff * skb = lp->saved_skb;
618 word length;
619 unsigned int ioaddr;
620 byte * buf;
621
622 ioaddr = dev->base_addr;
623
624 if ( !skb ) {
625 PRINTK((CARDNAME": In XMIT with no packet to send \n"));
626 return;
627 }
628 length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
629 buf = skb->data;
630
631 /* If I get here, I _know_ there is a packet slot waiting for me */
632 packet_no = inb( ioaddr + PNR_ARR + 1 );
633 if ( packet_no & 0x80 ) {
634 /* or isn't there? BAD CHIP! */
635 printk(KERN_DEBUG CARDNAME": Memory allocation failed. \n");
636 dev_kfree_skb_any(skb);
637 lp->saved_skb = NULL;
638 netif_wake_queue(dev);
639 return;
640 }
641
642 /* we have a packet address, so tell the card to use it */
643 outb( packet_no, ioaddr + PNR_ARR );
644
645 /* point to the beginning of the packet */
646 outw( PTR_AUTOINC , ioaddr + POINTER );
647
648 PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
649#if SMC_DEBUG > 2
650 print_packet( buf, length );
651#endif
652
653 /* send the packet length ( +6 for status, length and ctl byte )
654 and the status word ( set to zeros ) */
655#ifdef USE_32_BIT
656 outl( (length +6 ) << 16 , ioaddr + DATA_1 );
657#else
658 outw( 0, ioaddr + DATA_1 );
659 /* send the packet length ( +6 for status words, length, and ctl*/
660 outb( (length+6) & 0xFF,ioaddr + DATA_1 );
661 outb( (length+6) >> 8 , ioaddr + DATA_1 );
662#endif
663
664 /* send the actual data
665 . I _think_ it's faster to send the longs first, and then
666 . mop up by sending the last word. It depends heavily
667 . on alignment, at least on the 486. Maybe it would be
668 . a good idea to check which is optimal? But that could take
669 . almost as much time as is saved?
670 */
671#ifdef USE_32_BIT
672 if ( length & 0x2 ) {
673 outsl(ioaddr + DATA_1, buf, length >> 2 );
674#if !defined(__H8300H__) && !defined(__H8300S__)
675 outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
676#else
677 ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
678#endif
679 }
680 else
681 outsl(ioaddr + DATA_1, buf, length >> 2 );
682#else
683 outsw(ioaddr + DATA_1 , buf, (length ) >> 1);
684#endif
685 /* Send the last byte, if there is one. */
686
687 if ( (length & 1) == 0 ) {
688 outw( 0, ioaddr + DATA_1 );
689 } else {
690 outb( buf[length -1 ], ioaddr + DATA_1 );
691 outb( 0x20, ioaddr + DATA_1);
692 }
693
694 /* enable the interrupts */
695 SMC_ENABLE_INT( (IM_TX_INT | IM_TX_EMPTY_INT) );
696
697 /* and let the chipset deal with it */
698 outw( MC_ENQUEUE , ioaddr + MMU_CMD );
699
700 PRINTK2((CARDNAME": Sent packet of length %d \n",length));
701
702 lp->saved_skb = NULL;
703 dev_kfree_skb_any (skb);
704
705 dev->trans_start = jiffies;
706
707 /* we can send another packet */
708 netif_wake_queue(dev);
709
710 return;
711}
712
713/*-------------------------------------------------------------------------
714 |
715 | smc_init(int unit)
716 | Input parameters:
717 | dev->base_addr == 0, try to find all possible locations
718 | dev->base_addr == 1, return failure code
719 | dev->base_addr == 2, always allocate space, and return success
720 | dev->base_addr == <anything else> this is the address to check
721 |
722 | Output:
723 | pointer to net_device or ERR_PTR(error)
724 |
725 ---------------------------------------------------------------------------
726*/
727static int io;
728static int irq;
729static int ifport;
730
731struct net_device * __init smc_init(int unit)
732{
733 struct net_device *dev = alloc_etherdev(sizeof(struct smc_local));
Randy Dunlapa2bd2ec2006-06-10 13:30:10 -0700734 struct devlist *smcdev = smc_devlist;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700735 int err = 0;
736
Linus Torvalds1da177e2005-04-16 15:20:36 -0700737 if (!dev)
738 return ERR_PTR(-ENODEV);
739
740 if (unit >= 0) {
741 sprintf(dev->name, "eth%d", unit);
742 netdev_boot_setup_check(dev);
743 io = dev->base_addr;
744 irq = dev->irq;
745 }
746
747 SET_MODULE_OWNER(dev);
748
749 if (io > 0x1ff) { /* Check a single specified location. */
750 err = smc_probe(dev, io);
751 } else if (io != 0) { /* Don't probe at all. */
752 err = -ENXIO;
753 } else {
754 for (;smcdev->port; smcdev++) {
755 if (smc_probe(dev, smcdev->port) == 0)
756 break;
757 }
758 if (!smcdev->port)
759 err = -ENODEV;
760 }
761 if (err)
762 goto out;
763 err = register_netdev(dev);
764 if (err)
765 goto out1;
766 return dev;
767out1:
768 free_irq(dev->irq, dev);
769 release_region(dev->base_addr, SMC_IO_EXTENT);
770out:
771 free_netdev(dev);
772 return ERR_PTR(err);
773}
774
775/*----------------------------------------------------------------------
776 . smc_findirq
777 .
778 . This routine has a simple purpose -- make the SMC chip generate an
779 . interrupt, so an auto-detect routine can detect it, and find the IRQ,
780 ------------------------------------------------------------------------
781*/
782int __init smc_findirq( int ioaddr )
783{
784#ifndef NO_AUTOPROBE
785 int timeout = 20;
786 unsigned long cookie;
787
788
789 cookie = probe_irq_on();
790
791 /*
792 * What I try to do here is trigger an ALLOC_INT. This is done
793 * by allocating a small chunk of memory, which will give an interrupt
794 * when done.
795 */
796
797
798 SMC_SELECT_BANK(2);
799 /* enable ALLOCation interrupts ONLY */
800 outb( IM_ALLOC_INT, ioaddr + INT_MASK );
801
802 /*
803 . Allocate 512 bytes of memory. Note that the chip was just
804 . reset so all the memory is available
805 */
806 outw( MC_ALLOC | 1, ioaddr + MMU_CMD );
807
808 /*
809 . Wait until positive that the interrupt has been generated
810 */
811 while ( timeout ) {
812 byte int_status;
813
814 int_status = inb( ioaddr + INTERRUPT );
815
816 if ( int_status & IM_ALLOC_INT )
817 break; /* got the interrupt */
818 timeout--;
819 }
820 /* there is really nothing that I can do here if timeout fails,
821 as probe_irq_off will return a 0 anyway, which is what I
822 want in this case. Plus, the clean up is needed in both
823 cases. */
824
825 /* DELAY HERE!
826 On a fast machine, the status might change before the interrupt
827 is given to the processor. This means that the interrupt was
828 never detected, and probe_irq_off fails to report anything.
829 This should fix probe_irq_* problems.
830 */
831 SMC_DELAY();
832 SMC_DELAY();
833
834 /* and disable all interrupts again */
835 outb( 0, ioaddr + INT_MASK );
836
837 /* and return what I found */
838 return probe_irq_off(cookie);
839#else /* NO_AUTOPROBE */
840 struct devlist *smcdev;
841 for (smcdev = smc_devlist; smcdev->port; smcdev++) {
842 if (smcdev->port == ioaddr)
843 return smcdev->irq;
844 }
845 return 0;
846#endif
847}
848
849/*----------------------------------------------------------------------
850 . Function: smc_probe( int ioaddr )
851 .
852 . Purpose:
853 . Tests to see if a given ioaddr points to an SMC9xxx chip.
854 . Returns a 0 on success
855 .
856 . Algorithm:
857 . (1) see if the high byte of BANK_SELECT is 0x33
858 . (2) compare the ioaddr with the base register's address
859 . (3) see if I recognize the chip ID in the appropriate register
860 .
861 .---------------------------------------------------------------------
862 */
863
864/*---------------------------------------------------------------
865 . Here I do typical initialization tasks.
866 .
867 . o Initialize the structure if needed
868 . o print out my vanity message if not done so already
869 . o print out what type of hardware is detected
870 . o print out the ethernet address
871 . o find the IRQ
872 . o set up my private data
873 . o configure the dev structure with my subroutines
874 . o actually GRAB the irq.
875 . o GRAB the region
876 .-----------------------------------------------------------------
877*/
878static int __init smc_probe(struct net_device *dev, int ioaddr)
879{
880 int i, memory, retval;
881 static unsigned version_printed;
882 unsigned int bank;
883
884 const char *version_string;
885 const char *if_string;
886
887 /* registers */
888 word revision_register;
889 word base_address_register;
890 word configuration_register;
891 word memory_info_register;
892 word memory_cfg_register;
893
894 /* Grab the region so that no one else tries to probe our ioports. */
895 if (!request_region(ioaddr, SMC_IO_EXTENT, DRV_NAME))
896 return -EBUSY;
897
898 dev->irq = irq;
899 dev->if_port = ifport;
900
901 /* First, see if the high byte is 0x33 */
902 bank = inw( ioaddr + BANK_SELECT );
903 if ( (bank & 0xFF00) != 0x3300 ) {
904 retval = -ENODEV;
905 goto err_out;
906 }
907 /* The above MIGHT indicate a device, but I need to write to further
908 test this. */
909 outw( 0x0, ioaddr + BANK_SELECT );
910 bank = inw( ioaddr + BANK_SELECT );
911 if ( (bank & 0xFF00 ) != 0x3300 ) {
912 retval = -ENODEV;
913 goto err_out;
914 }
915#if !defined(CONFIG_H8S_EDOSK2674)
916 /* well, we've already written once, so hopefully another time won't
917 hurt. This time, I need to switch the bank register to bank 1,
918 so I can access the base address register */
919 SMC_SELECT_BANK(1);
920 base_address_register = inw( ioaddr + BASE );
921 if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) {
922 printk(CARDNAME ": IOADDR %x doesn't match configuration (%x)."
923 "Probably not a SMC chip\n",
924 ioaddr, base_address_register >> 3 & 0x3E0 );
925 /* well, the base address register didn't match. Must not have
926 been a SMC chip after all. */
927 retval = -ENODEV;
928 goto err_out;
929 }
930#else
931 (void)base_address_register; /* Warning suppression */
932#endif
933
934
935 /* check if the revision register is something that I recognize.
936 These might need to be added to later, as future revisions
937 could be added. */
938 SMC_SELECT_BANK(3);
939 revision_register = inw( ioaddr + REVISION );
940 if ( !chip_ids[ ( revision_register >> 4 ) & 0xF ] ) {
941 /* I don't recognize this chip, so... */
942 printk(CARDNAME ": IO %x: Unrecognized revision register:"
943 " %x, Contact author. \n", ioaddr, revision_register );
944
945 retval = -ENODEV;
946 goto err_out;
947 }
948
949 /* at this point I'll assume that the chip is an SMC9xxx.
950 It might be prudent to check a listing of MAC addresses
951 against the hardware address, or do some other tests. */
952
953 if (version_printed++ == 0)
954 printk("%s", version);
955
956 /* fill in some of the fields */
957 dev->base_addr = ioaddr;
958
959 /*
960 . Get the MAC address ( bank 1, regs 4 - 9 )
961 */
962 SMC_SELECT_BANK( 1 );
963 for ( i = 0; i < 6; i += 2 ) {
964 word address;
965
966 address = inw( ioaddr + ADDR0 + i );
967 dev->dev_addr[ i + 1] = address >> 8;
968 dev->dev_addr[ i ] = address & 0xFF;
969 }
970
971 /* get the memory information */
972
973 SMC_SELECT_BANK( 0 );
974 memory_info_register = inw( ioaddr + MIR );
975 memory_cfg_register = inw( ioaddr + MCR );
976 memory = ( memory_cfg_register >> 9 ) & 0x7; /* multiplier */
977 memory *= 256 * ( memory_info_register & 0xFF );
978
979 /*
980 Now, I want to find out more about the chip. This is sort of
981 redundant, but it's cleaner to have it in both, rather than having
982 one VERY long probe procedure.
983 */
984 SMC_SELECT_BANK(3);
985 revision_register = inw( ioaddr + REVISION );
986 version_string = chip_ids[ ( revision_register >> 4 ) & 0xF ];
987 if ( !version_string ) {
988 /* I shouldn't get here because this call was done before.... */
989 retval = -ENODEV;
990 goto err_out;
991 }
992
993 /* is it using AUI or 10BaseT ? */
994 if ( dev->if_port == 0 ) {
995 SMC_SELECT_BANK(1);
996 configuration_register = inw( ioaddr + CONFIG );
997 if ( configuration_register & CFG_AUI_SELECT )
998 dev->if_port = 2;
999 else
1000 dev->if_port = 1;
1001 }
1002 if_string = interfaces[ dev->if_port - 1 ];
1003
1004 /* now, reset the chip, and put it into a known state */
1005 smc_reset( ioaddr );
1006
1007 /*
1008 . If dev->irq is 0, then the device has to be banged on to see
1009 . what the IRQ is.
1010 .
1011 . This banging doesn't always detect the IRQ, for unknown reasons.
1012 . a workaround is to reset the chip and try again.
1013 .
1014 . Interestingly, the DOS packet driver *SETS* the IRQ on the card to
1015 . be what is requested on the command line. I don't do that, mostly
1016 . because the card that I have uses a non-standard method of accessing
1017 . the IRQs, and because this _should_ work in most configurations.
1018 .
1019 . Specifying an IRQ is done with the assumption that the user knows
1020 . what (s)he is doing. No checking is done!!!!
1021 .
1022 */
1023 if ( dev->irq < 2 ) {
1024 int trials;
1025
1026 trials = 3;
1027 while ( trials-- ) {
1028 dev->irq = smc_findirq( ioaddr );
1029 if ( dev->irq )
1030 break;
1031 /* kick the card and try again */
1032 smc_reset( ioaddr );
1033 }
1034 }
1035 if (dev->irq == 0 ) {
1036 printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n");
1037 retval = -ENODEV;
1038 goto err_out;
1039 }
1040
1041 /* now, print out the card info, in a short format.. */
1042
1043 printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
1044 version_string, revision_register & 0xF, ioaddr, dev->irq,
1045 if_string, memory );
1046 /*
1047 . Print the Ethernet address
1048 */
1049 printk("ADDR: ");
1050 for (i = 0; i < 5; i++)
1051 printk("%2.2x:", dev->dev_addr[i] );
1052 printk("%2.2x \n", dev->dev_addr[5] );
1053
1054 /* set the private data to zero by default */
1055 memset(dev->priv, 0, sizeof(struct smc_local));
1056
1057 /* Grab the IRQ */
1058 retval = request_irq(dev->irq, &smc_interrupt, 0, DRV_NAME, dev);
1059 if (retval) {
1060 printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
1061 dev->irq, retval);
1062 goto err_out;
1063 }
1064
1065 dev->open = smc_open;
1066 dev->stop = smc_close;
1067 dev->hard_start_xmit = smc_wait_to_send_packet;
1068 dev->tx_timeout = smc_timeout;
1069 dev->watchdog_timeo = HZ/20;
1070 dev->get_stats = smc_query_statistics;
1071 dev->set_multicast_list = smc_set_multicast_list;
1072
1073 return 0;
1074
1075err_out:
1076 release_region(ioaddr, SMC_IO_EXTENT);
1077 return retval;
1078}
1079
1080#if SMC_DEBUG > 2
1081static void print_packet( byte * buf, int length )
1082{
1083#if 0
1084 int i;
1085 int remainder;
1086 int lines;
1087
1088 printk("Packet of length %d \n", length );
1089 lines = length / 16;
1090 remainder = length % 16;
1091
1092 for ( i = 0; i < lines ; i ++ ) {
1093 int cur;
1094
1095 for ( cur = 0; cur < 8; cur ++ ) {
1096 byte a, b;
1097
1098 a = *(buf ++ );
1099 b = *(buf ++ );
1100 printk("%02x%02x ", a, b );
1101 }
1102 printk("\n");
1103 }
1104 for ( i = 0; i < remainder/2 ; i++ ) {
1105 byte a, b;
1106
1107 a = *(buf ++ );
1108 b = *(buf ++ );
1109 printk("%02x%02x ", a, b );
1110 }
1111 printk("\n");
1112#endif
1113}
1114#endif
1115
1116
1117/*
1118 * Open and Initialize the board
1119 *
1120 * Set up everything, reset the card, etc ..
1121 *
1122 */
1123static int smc_open(struct net_device *dev)
1124{
1125 int ioaddr = dev->base_addr;
1126
1127 int i; /* used to set hw ethernet address */
1128
1129 /* clear out all the junk that was put here before... */
1130 memset(dev->priv, 0, sizeof(struct smc_local));
1131
1132 /* reset the hardware */
1133
1134 smc_reset( ioaddr );
1135 smc_enable( ioaddr );
1136
1137 /* Select which interface to use */
1138
1139 SMC_SELECT_BANK( 1 );
1140 if ( dev->if_port == 1 ) {
1141 outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT,
1142 ioaddr + CONFIG );
1143 }
1144 else if ( dev->if_port == 2 ) {
1145 outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT,
1146 ioaddr + CONFIG );
1147 }
1148
1149 /*
1150 According to Becker, I have to set the hardware address
1151 at this point, because the (l)user can set it with an
1152 ioctl. Easily done...
1153 */
1154 SMC_SELECT_BANK( 1 );
1155 for ( i = 0; i < 6; i += 2 ) {
1156 word address;
1157
1158 address = dev->dev_addr[ i + 1 ] << 8 ;
1159 address |= dev->dev_addr[ i ];
1160 outw( address, ioaddr + ADDR0 + i );
1161 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001162
Linus Torvalds1da177e2005-04-16 15:20:36 -07001163 netif_start_queue(dev);
1164 return 0;
1165}
1166
1167/*--------------------------------------------------------
1168 . Called by the kernel to send a packet out into the void
1169 . of the net. This routine is largely based on
1170 . skeleton.c, from Becker.
1171 .--------------------------------------------------------
1172*/
1173
1174static void smc_timeout(struct net_device *dev)
1175{
1176 /* If we get here, some higher level has decided we are broken.
1177 There should really be a "kick me" function call instead. */
1178 printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
1179 tx_done(dev) ? "IRQ conflict" :
1180 "network cable problem");
1181 /* "kick" the adaptor */
1182 smc_reset( dev->base_addr );
1183 smc_enable( dev->base_addr );
1184 dev->trans_start = jiffies;
1185 /* clear anything saved */
1186 ((struct smc_local *)dev->priv)->saved_skb = NULL;
1187 netif_wake_queue(dev);
1188}
1189
1190/*-------------------------------------------------------------
1191 .
1192 . smc_rcv - receive a packet from the card
1193 .
1194 . There is ( at least ) a packet waiting to be read from
1195 . chip-memory.
1196 .
1197 . o Read the status
1198 . o If an error, record it
1199 . o otherwise, read in the packet
1200 --------------------------------------------------------------
1201*/
1202static void smc_rcv(struct net_device *dev)
1203{
1204 struct smc_local *lp = netdev_priv(dev);
1205 int ioaddr = dev->base_addr;
1206 int packet_number;
1207 word status;
1208 word packet_length;
1209
1210 /* assume bank 2 */
1211
1212 packet_number = inw( ioaddr + FIFO_PORTS );
1213
1214 if ( packet_number & FP_RXEMPTY ) {
1215 /* we got called , but nothing was on the FIFO */
1216 PRINTK((CARDNAME ": WARNING: smc_rcv with nothing on FIFO. \n"));
1217 /* don't need to restore anything */
1218 return;
1219 }
1220
1221 /* start reading from the start of the packet */
1222 outw( PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER );
1223
1224 /* First two words are status and packet_length */
1225 status = inw( ioaddr + DATA_1 );
1226 packet_length = inw( ioaddr + DATA_1 );
1227
1228 packet_length &= 0x07ff; /* mask off top bits */
1229
1230 PRINTK2(("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ));
1231 /*
1232 . the packet length contains 3 extra words :
1233 . status, length, and an extra word with an odd byte .
1234 */
1235 packet_length -= 6;
1236
1237 if ( !(status & RS_ERRORS ) ){
1238 /* do stuff to make a new packet */
1239 struct sk_buff * skb;
1240 byte * data;
1241
1242 /* read one extra byte */
1243 if ( status & RS_ODDFRAME )
1244 packet_length++;
1245
1246 /* set multicast stats */
1247 if ( status & RS_MULTICAST )
1248 lp->stats.multicast++;
1249
1250 skb = dev_alloc_skb( packet_length + 5);
1251
1252 if ( skb == NULL ) {
1253 printk(KERN_NOTICE CARDNAME ": Low memory, packet dropped.\n");
1254 lp->stats.rx_dropped++;
1255 goto done;
1256 }
1257
1258 /*
1259 ! This should work without alignment, but it could be
1260 ! in the worse case
1261 */
1262
1263 skb_reserve( skb, 2 ); /* 16 bit alignment */
1264
1265 skb->dev = dev;
1266 data = skb_put( skb, packet_length);
1267
1268#ifdef USE_32_BIT
1269 /* QUESTION: Like in the TX routine, do I want
1270 to send the DWORDs or the bytes first, or some
1271 mixture. A mixture might improve already slow PIO
1272 performance */
1273 PRINTK3((" Reading %d dwords (and %d bytes) \n",
1274 packet_length >> 2, packet_length & 3 ));
1275 insl(ioaddr + DATA_1 , data, packet_length >> 2 );
1276 /* read the left over bytes */
1277 insb( ioaddr + DATA_1, data + (packet_length & 0xFFFFFC),
1278 packet_length & 0x3 );
1279#else
1280 PRINTK3((" Reading %d words and %d byte(s) \n",
1281 (packet_length >> 1 ), packet_length & 1 ));
1282 insw(ioaddr + DATA_1 , data, packet_length >> 1);
1283 if ( packet_length & 1 ) {
1284 data += packet_length & ~1;
1285 *(data++) = inb( ioaddr + DATA_1 );
1286 }
1287#endif
1288#if SMC_DEBUG > 2
1289 print_packet( data, packet_length );
1290#endif
1291
1292 skb->protocol = eth_type_trans(skb, dev );
1293 netif_rx(skb);
1294 dev->last_rx = jiffies;
1295 lp->stats.rx_packets++;
1296 lp->stats.rx_bytes += packet_length;
1297 } else {
1298 /* error ... */
1299 lp->stats.rx_errors++;
1300
1301 if ( status & RS_ALGNERR ) lp->stats.rx_frame_errors++;
1302 if ( status & (RS_TOOSHORT | RS_TOOLONG ) )
1303 lp->stats.rx_length_errors++;
1304 if ( status & RS_BADCRC) lp->stats.rx_crc_errors++;
1305 }
1306
1307done:
1308 /* error or good, tell the card to get rid of this packet */
1309 outw( MC_RELEASE, ioaddr + MMU_CMD );
1310}
1311
1312
1313/*************************************************************************
1314 . smc_tx
1315 .
1316 . Purpose: Handle a transmit error message. This will only be called
1317 . when an error, because of the AUTO_RELEASE mode.
1318 .
1319 . Algorithm:
1320 . Save pointer and packet no
1321 . Get the packet no from the top of the queue
1322 . check if it's valid ( if not, is this an error??? )
1323 . read the status word
1324 . record the error
1325 . ( resend? Not really, since we don't want old packets around )
1326 . Restore saved values
1327 ************************************************************************/
1328static void smc_tx( struct net_device * dev )
1329{
1330 int ioaddr = dev->base_addr;
1331 struct smc_local *lp = netdev_priv(dev);
1332 byte saved_packet;
1333 byte packet_no;
1334 word tx_status;
1335
1336
1337 /* assume bank 2 */
1338
1339 saved_packet = inb( ioaddr + PNR_ARR );
1340 packet_no = inw( ioaddr + FIFO_PORTS );
1341 packet_no &= 0x7F;
1342
1343 /* select this as the packet to read from */
1344 outb( packet_no, ioaddr + PNR_ARR );
1345
1346 /* read the first word from this packet */
1347 outw( PTR_AUTOINC | PTR_READ, ioaddr + POINTER );
1348
1349 tx_status = inw( ioaddr + DATA_1 );
1350 PRINTK3((CARDNAME": TX DONE STATUS: %4x \n", tx_status ));
1351
1352 lp->stats.tx_errors++;
1353 if ( tx_status & TS_LOSTCAR ) lp->stats.tx_carrier_errors++;
1354 if ( tx_status & TS_LATCOL ) {
1355 printk(KERN_DEBUG CARDNAME
1356 ": Late collision occurred on last xmit.\n");
1357 lp->stats.tx_window_errors++;
1358 }
1359#if 0
1360 if ( tx_status & TS_16COL ) { ... }
1361#endif
1362
1363 if ( tx_status & TS_SUCCESS ) {
1364 printk(CARDNAME": Successful packet caused interrupt \n");
1365 }
1366 /* re-enable transmit */
1367 SMC_SELECT_BANK( 0 );
1368 outw( inw( ioaddr + TCR ) | TCR_ENABLE, ioaddr + TCR );
1369
1370 /* kill the packet */
1371 SMC_SELECT_BANK( 2 );
1372 outw( MC_FREEPKT, ioaddr + MMU_CMD );
1373
1374 /* one less packet waiting for me */
1375 lp->packets_waiting--;
1376
1377 outb( saved_packet, ioaddr + PNR_ARR );
1378 return;
1379}
1380
1381/*--------------------------------------------------------------------
1382 .
1383 . This is the main routine of the driver, to handle the device when
1384 . it needs some attention.
1385 .
1386 . So:
1387 . first, save state of the chipset
1388 . branch off into routines to handle each case, and acknowledge
1389 . each to the interrupt register
1390 . and finally restore state.
1391 .
1392 ---------------------------------------------------------------------*/
1393
David Howells7d12e782006-10-05 14:55:46 +01001394static irqreturn_t smc_interrupt(int irq, void * dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395{
1396 struct net_device *dev = dev_id;
1397 int ioaddr = dev->base_addr;
1398 struct smc_local *lp = netdev_priv(dev);
1399
1400 byte status;
1401 word card_stats;
1402 byte mask;
1403 int timeout;
1404 /* state registers */
1405 word saved_bank;
1406 word saved_pointer;
1407 int handled = 0;
1408
1409
1410 PRINTK3((CARDNAME": SMC interrupt started \n"));
1411
1412 saved_bank = inw( ioaddr + BANK_SELECT );
1413
1414 SMC_SELECT_BANK(2);
1415 saved_pointer = inw( ioaddr + POINTER );
1416
1417 mask = inb( ioaddr + INT_MASK );
1418 /* clear all interrupts */
1419 outb( 0, ioaddr + INT_MASK );
1420
1421
1422 /* set a timeout value, so I don't stay here forever */
1423 timeout = 4;
1424
1425 PRINTK2((KERN_WARNING CARDNAME ": MASK IS %x \n", mask ));
1426 do {
1427 /* read the status flag, and mask it */
1428 status = inb( ioaddr + INTERRUPT ) & mask;
1429 if (!status )
1430 break;
1431
1432 handled = 1;
1433
1434 PRINTK3((KERN_WARNING CARDNAME
1435 ": Handling interrupt status %x \n", status ));
1436
1437 if (status & IM_RCV_INT) {
1438 /* Got a packet(s). */
1439 PRINTK2((KERN_WARNING CARDNAME
1440 ": Receive Interrupt\n"));
1441 smc_rcv(dev);
1442 } else if (status & IM_TX_INT ) {
1443 PRINTK2((KERN_WARNING CARDNAME
1444 ": TX ERROR handled\n"));
1445 smc_tx(dev);
1446 outb(IM_TX_INT, ioaddr + INTERRUPT );
1447 } else if (status & IM_TX_EMPTY_INT ) {
1448 /* update stats */
1449 SMC_SELECT_BANK( 0 );
1450 card_stats = inw( ioaddr + COUNTER );
1451 /* single collisions */
1452 lp->stats.collisions += card_stats & 0xF;
1453 card_stats >>= 4;
1454 /* multiple collisions */
1455 lp->stats.collisions += card_stats & 0xF;
1456
1457 /* these are for when linux supports these statistics */
1458
1459 SMC_SELECT_BANK( 2 );
1460 PRINTK2((KERN_WARNING CARDNAME
1461 ": TX_BUFFER_EMPTY handled\n"));
1462 outb( IM_TX_EMPTY_INT, ioaddr + INTERRUPT );
1463 mask &= ~IM_TX_EMPTY_INT;
1464 lp->stats.tx_packets += lp->packets_waiting;
1465 lp->packets_waiting = 0;
1466
1467 } else if (status & IM_ALLOC_INT ) {
1468 PRINTK2((KERN_DEBUG CARDNAME
1469 ": Allocation interrupt \n"));
1470 /* clear this interrupt so it doesn't happen again */
1471 mask &= ~IM_ALLOC_INT;
1472
1473 smc_hardware_send_packet( dev );
1474
1475 /* enable xmit interrupts based on this */
1476 mask |= ( IM_TX_EMPTY_INT | IM_TX_INT );
1477
1478 /* and let the card send more packets to me */
1479 netif_wake_queue(dev);
1480
1481 PRINTK2((CARDNAME": Handoff done successfully.\n"));
1482 } else if (status & IM_RX_OVRN_INT ) {
1483 lp->stats.rx_errors++;
1484 lp->stats.rx_fifo_errors++;
1485 outb( IM_RX_OVRN_INT, ioaddr + INTERRUPT );
1486 } else if (status & IM_EPH_INT ) {
1487 PRINTK((CARDNAME ": UNSUPPORTED: EPH INTERRUPT \n"));
1488 } else if (status & IM_ERCV_INT ) {
1489 PRINTK((CARDNAME ": UNSUPPORTED: ERCV INTERRUPT \n"));
1490 outb( IM_ERCV_INT, ioaddr + INTERRUPT );
1491 }
1492 } while ( timeout -- );
1493
1494
1495 /* restore state register */
1496 SMC_SELECT_BANK( 2 );
1497 outb( mask, ioaddr + INT_MASK );
1498
1499 PRINTK3(( KERN_WARNING CARDNAME ": MASK is now %x \n", mask ));
1500 outw( saved_pointer, ioaddr + POINTER );
1501
1502 SMC_SELECT_BANK( saved_bank );
1503
1504 PRINTK3((CARDNAME ": Interrupt done\n"));
1505 return IRQ_RETVAL(handled);
1506}
1507
1508
1509/*----------------------------------------------------
1510 . smc_close
1511 .
1512 . this makes the board clean up everything that it can
1513 . and not talk to the outside world. Caused by
1514 . an 'ifconfig ethX down'
1515 .
1516 -----------------------------------------------------*/
1517static int smc_close(struct net_device *dev)
1518{
1519 netif_stop_queue(dev);
1520 /* clear everything */
1521 smc_shutdown( dev->base_addr );
1522
1523 /* Update the statistics here. */
1524 return 0;
1525}
1526
1527/*------------------------------------------------------------
1528 . Get the current statistics.
1529 . This may be called with the card open or closed.
1530 .-------------------------------------------------------------*/
1531static struct net_device_stats* smc_query_statistics(struct net_device *dev) {
1532 struct smc_local *lp = netdev_priv(dev);
1533
1534 return &lp->stats;
1535}
1536
1537/*-----------------------------------------------------------
1538 . smc_set_multicast_list
1539 .
1540 . This routine will, depending on the values passed to it,
1541 . either make it accept multicast packets, go into
1542 . promiscuous mode ( for TCPDUMP and cousins ) or accept
1543 . a select set of multicast packets
1544*/
1545static void smc_set_multicast_list(struct net_device *dev)
1546{
1547 short ioaddr = dev->base_addr;
1548
1549 SMC_SELECT_BANK(0);
1550 if ( dev->flags & IFF_PROMISC )
1551 outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR );
1552
1553/* BUG? I never disable promiscuous mode if multicasting was turned on.
1554 Now, I turn off promiscuous mode, but I don't do anything to multicasting
1555 when promiscuous mode is turned on.
1556*/
1557
1558 /* Here, I am setting this to accept all multicast packets.
1559 I don't need to zero the multicast table, because the flag is
1560 checked before the table is
1561 */
1562 else if (dev->flags & IFF_ALLMULTI)
1563 outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR );
1564
1565 /* We just get all multicast packets even if we only want them
1566 . from one source. This will be changed at some future
1567 . point. */
1568 else if (dev->mc_count ) {
1569 /* support hardware multicasting */
1570
1571 /* be sure I get rid of flags I might have set */
1572 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
1573 ioaddr + RCR );
1574 /* NOTE: this has to set the bank, so make sure it is the
1575 last thing called. The bank is set to zero at the top */
1576 smc_setmulticast( ioaddr, dev->mc_count, dev->mc_list );
1577 }
1578 else {
1579 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
1580 ioaddr + RCR );
1581
1582 /*
1583 since I'm disabling all multicast entirely, I need to
1584 clear the multicast list
1585 */
1586 SMC_SELECT_BANK( 3 );
1587 outw( 0, ioaddr + MULTICAST1 );
1588 outw( 0, ioaddr + MULTICAST2 );
1589 outw( 0, ioaddr + MULTICAST3 );
1590 outw( 0, ioaddr + MULTICAST4 );
1591 }
1592}
1593
1594#ifdef MODULE
1595
1596static struct net_device *devSMC9194;
1597MODULE_LICENSE("GPL");
1598
1599module_param(io, int, 0);
1600module_param(irq, int, 0);
1601module_param(ifport, int, 0);
1602MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
1603MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
1604MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)");
1605
Randy Dunlapa2bd2ec2006-06-10 13:30:10 -07001606int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001607{
1608 if (io == 0)
1609 printk(KERN_WARNING
1610 CARDNAME": You shouldn't use auto-probing with insmod!\n" );
1611
1612 /* copy the parameters from insmod into the device structure */
1613 devSMC9194 = smc_init(-1);
1614 if (IS_ERR(devSMC9194))
1615 return PTR_ERR(devSMC9194);
1616 return 0;
1617}
1618
1619void cleanup_module(void)
1620{
1621 unregister_netdev(devSMC9194);
1622 free_irq(devSMC9194->irq, devSMC9194);
1623 release_region(devSMC9194->base_addr, SMC_IO_EXTENT);
1624 free_netdev(devSMC9194);
1625}
1626
1627#endif /* MODULE */