Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 82b736df4da2c6fdf2c0018938685cf36d112ecd / . / drivers / regulator / Kconfig
blob: 759b601b54ef7910b0de4421eb404d626c438e43 [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]67config REGULATOR_88PM8607
68 bool "Marvell 88PM8607 Power regulators"
69 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]71 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]72
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]73config REGULATOR_AD5398
74 tristate "Analog Devices AD5398/AD5821 regulators"
75 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]76 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77 This driver supports AD5398 and AD5821 current regulator chips.
78 If building into module, its name is ad5398.ko.
79
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]80config REGULATOR_ANATOP
81 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
82 depends on MFD_SYSCON
83 help
84 Say y here to support Freescale i.MX on-chip ANATOP LDOs
85 regulators. It is recommended that this option be
86 enabled on i.MX6 platform.
87
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]88config REGULATOR_AAT2870
89 tristate "AnalogicTech AAT2870 Regulators"
90 depends on MFD_AAT2870_CORE
91 help
92 If you have a AnalogicTech AAT2870 say Y to enable the
93 regulator driver.
94
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]95config REGULATOR_AB3100
96 tristate "ST-Ericsson AB3100 Regulator functions"
97 depends on AB3100_CORE
98 default y if AB3100_CORE
99 help
100 These regulators correspond to functionality in the
101 AB3100 analog baseband dealing with power regulators
102 for the system.
103
104config REGULATOR_AB8500
105 bool "ST-Ericsson AB8500 Power Regulators"
106 depends on AB8500_CORE
107 help
108 This driver supports the regulators found on the ST-Ericsson mixed
109 signal AB8500 PMIC
110
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]111config REGULATOR_ARIZONA
112 tristate "Wolfson Arizona class devices"
113 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]114 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]115 help
116 Support for the regulators found on Wolfson Arizona class
117 devices.
118
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]119config REGULATOR_AS3711
120 tristate "AS3711 PMIC"
121 depends on MFD_AS3711
122 help
123 This driver provides support for the voltage regulators on the
124 AS3711 PMIC
125
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]126config REGULATOR_DA903X
127 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
128 depends on PMIC_DA903X
129 help
130 Say y here to support the BUCKs and LDOs regulators found on
131 Dialog Semiconductor DA9030/DA9034 PMIC.
132
133config REGULATOR_DA9052
134 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
135 depends on PMIC_DA9052
136 help
137 This driver supports the voltage regulators of DA9052-BC and
138 DA9053-AA/Bx PMIC.
139
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]140config REGULATOR_DA9055
141 tristate "Dialog Semiconductor DA9055 regulators"
142 depends on MFD_DA9055
143 help
144 Say y here to support the BUCKs and LDOs regulators found on
145 Dialog Semiconductor DA9055 PMIC.
146
147 This driver can also be built as a module. If so, the module
148 will be called da9055-regulator.
149
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]150config REGULATOR_DBX500_PRCMU
151 bool
152
153config REGULATOR_DB8500_PRCMU
154 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
155 depends on MFD_DB8500_PRCMU
156 select REGULATOR_DBX500_PRCMU
157 help
158 This driver supports the voltage domain regulators controlled by the
159 DB8500 PRCMU
160
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]161config REGULATOR_FAN53555
162 tristate "Fairchild FAN53555 Regulator"
163 depends on I2C
164 select REGMAP_I2C
165 help
166 This driver supports Fairchild FAN53555 Digitally Programmable
167 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
168 regulator that delivers a digitally programmable output from an
169 input voltage supply of 2.5V to 5.5V. The output voltage is
170 programmed through an I2C interface.
171
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]172config REGULATOR_GPIO
173 tristate "GPIO regulator support"
174 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]175 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]176 This driver provides support for regulators that can be
177 controlled via gpios.
178 It is capable of supporting current and voltage regulators
179 and the platform has to provide a mapping of GPIO-states
180 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]181
182config REGULATOR_ISL6271A
183 tristate "Intersil ISL6271A Power regulator"
184 depends on I2C
185 help
186 This driver supports ISL6271A voltage regulator chip.
187
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]188config REGULATOR_LP3971
189 tristate "National Semiconductors LP3971 PMIC regulator driver"
190 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]191 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]192 Say Y here to support the voltage regulators and convertors
193 on National Semiconductors LP3971 PMIC
194
195config REGULATOR_LP3972
196 tristate "National Semiconductors LP3972 PMIC regulator driver"
197 depends on I2C
198 help
199 Say Y here to support the voltage regulators and convertors
200 on National Semiconductors LP3972 PMIC
201
202config REGULATOR_LP872X
203 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
204 depends on I2C=y
205 select REGMAP_I2C
206 help
207 This driver supports LP8720/LP8725 PMIC
208
209config REGULATOR_LP8755
210 tristate "TI LP8755 High Performance PMU driver"
211 depends on I2C
212 select REGMAP_I2C
213 help
214 This driver supports LP8755 High Performance PMU driver. This
215 chip contains six step-down DC/DC converters which can support
216 9 mode multiphase configuration.
217
218config REGULATOR_LP8788
219 bool "TI LP8788 Power Regulators"
220 depends on MFD_LP8788
221 help
222 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]223
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]224config REGULATOR_MAX1586
225 tristate "Maxim 1586/1587 voltage regulator"
226 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]227 help
228 This driver controls a Maxim 1586 or 1587 voltage output
229 regulator via I2C bus. The provided regulator is suitable
230 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
231
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]232config REGULATOR_MAX8649
233 tristate "Maxim 8649 voltage regulator"
234 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]235 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]236 help
237 This driver controls a Maxim 8649 voltage output regulator via
238 I2C bus.
239
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]240config REGULATOR_MAX8660
241 tristate "Maxim 8660/8661 voltage regulator"
242 depends on I2C
243 help
244 This driver controls a Maxim 8660/8661 voltage output
245 regulator via I2C bus.
246
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]247config REGULATOR_MAX8907
248 tristate "Maxim 8907 voltage regulator"
249 depends on MFD_MAX8907
250 help
251 This driver controls a Maxim 8907 voltage output regulator
252 via I2C bus. The provided regulator is suitable for Tegra
253 chip to control Step-Down DC-DC and LDOs.
254
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]255config REGULATOR_MAX8925
256 tristate "Maxim MAX8925 Power Management IC"
257 depends on MFD_MAX8925
258 help
259 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
260
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]261config REGULATOR_MAX8952
262 tristate "Maxim MAX8952 Power Management IC"
263 depends on I2C
264 help
265 This driver controls a Maxim 8952 voltage output regulator
266 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
267 modes ranging from 0.77V to 1.40V by 0.01V steps.
268
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]269config REGULATOR_MAX8973
270 tristate "Maxim MAX8973 voltage regulator "
271 depends on I2C
272 select REGMAP_I2C
273 help
274 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
275 switching regulator delievers up to 9A of output current. Each
276 phase operates at a 2MHz fixed frequency with a 120 deg shift
277 from the adjacent phase, allowing the use of small magnetic component.
278
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]279config REGULATOR_MAX8997
280 tristate "Maxim 8997/8966 regulator"
281 depends on MFD_MAX8997
282 help
283 This driver controls a Maxim 8997/8966 regulator
284 via I2C bus. The provided regulator is suitable for S5PC110,
285 S5PV210, and Exynos-4 chips to control VCC_CORE and
286 VCC_USIM voltages.
287
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]288config REGULATOR_MAX8998
289 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]290 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]291 help
292 This driver controls a Maxim 8998 voltage output regulator
293 via I2C bus. The provided regulator is suitable for S3C6410
294 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
295
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]296config REGULATOR_MAX77686
297 tristate "Maxim 77686 regulator"
298 depends on MFD_MAX77686
299 help
300 This driver controls a Maxim 77686 regulator
301 via I2C bus. The provided regulator is suitable for
302 Exynos-4 chips to control VARM and VINT voltages.
303
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]304config REGULATOR_MAX77693
305 tristate "Maxim MAX77693 regulator"
306 depends on MFD_MAX77693
307 help
308 This driver controls a Maxim 77693 regulator via I2C bus.
309 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
310 and one current regulator 'CHARGER'. This is suitable for
311 Exynos-4x12 chips.
312
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]313config REGULATOR_MC13XXX_CORE
314 tristate
315
316config REGULATOR_MC13783
317 tristate "Freescale MC13783 regulator driver"
318 depends on MFD_MC13783
319 select REGULATOR_MC13XXX_CORE
320 help
321 Say y here to support the regulators found on the Freescale MC13783
322 PMIC.
323
324config REGULATOR_MC13892
325 tristate "Freescale MC13892 regulator driver"
326 depends on MFD_MC13XXX
327 select REGULATOR_MC13XXX_CORE
328 help
329 Say y here to support the regulators found on the Freescale MC13892
330 PMIC.
331
332config REGULATOR_PALMAS
333 tristate "TI Palmas PMIC Regulators"
334 depends on MFD_PALMAS
335 help
336 If you wish to control the regulators on the Palmas series of
337 chips say Y here. This will enable support for all the software
338 controllable SMPS/LDO regulators.
339
340 The regulators available on Palmas series chips vary depending
341 on the muxing. This is handled automatically in the driver by
342 reading the mux info from OTP.
343
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]344config REGULATOR_PCAP
345 tristate "Motorola PCAP2 regulator driver"
346 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]347 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]348 This driver provides support for the voltage regulators of the
349 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]350
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]351config REGULATOR_PCF50633
352 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]353 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]354 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]355 Say Y here to support the voltage regulators and convertors
356 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]357
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]358config REGULATOR_RC5T583
359 tristate "RICOH RC5T583 Power regulators"
360 depends on MFD_RC5T583
361 help
362 Select this option to enable the power regulator of RICOH
363 PMIC RC5T583.
364 This driver supports the control of different power rails of device
365 through regulator interface. The device supports multiple DCDC/LDO
366 outputs which can be controlled by i2c communication.
367
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]368config REGULATOR_S2MPS11
369 tristate "Samsung S2MPS11 voltage regulator"
370 depends on MFD_SEC_CORE
371 help
372 This driver supports a Samsung S2MPS11 voltage output regulator
373 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
374 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
375
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]376config REGULATOR_S5M8767
377 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]378 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]379 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]380 This driver supports a Samsung S5M8767A voltage output regulator
381 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
382 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]383
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]384config REGULATOR_TI_ABB
385 bool "TI Adaptive Body Bias on-chip LDO"
386 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]387 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame^]388 Select this option to support Texas Instruments' on-chip Adaptive Body
389 Bias (ABB) LDO regulators. It is recommended that this option be
390 enabled on required TI SoC. Certain Operating Performance Points
391 on TI SoCs may be unstable without enabling this as it provides
392 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]393
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]394config REGULATOR_TPS51632
395 tristate "TI TPS51632 Power Regulator"
396 depends on I2C
397 select REGMAP_I2C
398 help
399 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]400 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]401 with Serial VID control and DVFS.
402 The voltage output can be configure through I2C interface or PWM
403 interface.
404
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]405config REGULATOR_TPS6105X
406 tristate "TI TPS6105X Power regulators"
407 depends on TPS6105X
408 default y if TPS6105X
409 help
410 This driver supports TPS61050/TPS61052 voltage regulator chips.
411 It is a single boost converter primarily for white LEDs and
412 audio amplifiers.
413
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]414config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]415 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]416 depends on I2C
417 select REGMAP_I2C
418 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]419 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]420 regulator is meant for processor core supply. This chip is
421 high-frequency synchronous step down dc-dc converter optimized
422 for battery-powered portable applications.
423
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]424config REGULATOR_TPS65023
425 tristate "TI TPS65023 Power regulators"
426 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]427 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]428 help
429 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
430 three step-down converters and two general-purpose LDO voltage regulators.
431 It supports TI's software based Class-2 SmartReflex implementation.
432
433config REGULATOR_TPS6507X
434 tristate "TI TPS6507X Power regulators"
435 depends on I2C
436 help
437 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
438 three step-down converters and two general-purpose LDO voltage regulators.
439 It supports TI's software based Class-2 SmartReflex implementation.
440
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]441config REGULATOR_TPS65090
442 tristate "TI TPS65090 Power regulator"
443 depends on MFD_TPS65090
444 help
445 This driver provides support for the voltage regulators on the
446 TI TPS65090 PMIC.
447
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]448config REGULATOR_TPS65217
449 tristate "TI TPS65217 Power regulators"
450 depends on MFD_TPS65217
451 help
452 This driver supports TPS65217 voltage regulator chips. TPS65217
453 provides three step-down converters and four general-purpose LDO
454 voltage regulators. It supports software based voltage control
455 for different voltage domains
456
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]457config REGULATOR_TPS6524X
458 tristate "TI TPS6524X Power regulators"
459 depends on SPI
460 help
461 This driver supports TPS6524X voltage regulator chips. TPS6524X
462 provides three step-down converters and two general-purpose LDO
463 voltage regulators. This device is interfaced using a customized
464 serial interface currently supported on the sequencer serial
465 port controller.
466
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]467config REGULATOR_TPS6586X
468 tristate "TI TPS6586X Power regulators"
469 depends on MFD_TPS6586X
470 help
471 This driver supports TPS6586X voltage regulator chips.
472
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]473config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]474 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]475 depends on MFD_TPS65910
476 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]477 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]478
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]479config REGULATOR_TPS65912
480 tristate "TI TPS65912 Power regulator"
481 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]482 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]483 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]484
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]485config REGULATOR_TPS80031
486 tristate "TI TPS80031/TPS80032 power regualtor driver"
487 depends on MFD_TPS80031
488 help
489 TPS80031/ TPS80032 Fully Integrated Power Management with Power
490 Path and Battery Charger. It has 5 configurable step-down
491 converters, 11 general purpose LDOs, VBUS generator and digital
492 output to control regulators.
493
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]494config REGULATOR_TWL4030
495 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
496 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]497 help
498 This driver supports the voltage regulators provided by
499 this family of companion chips.
500
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]501config REGULATOR_VEXPRESS
502 tristate "Versatile Express regulators"
503 depends on VEXPRESS_CONFIG
504 help
505 This driver provides support for voltage regulators available
506 on the ARM Ltd's Versatile Express platform.
507
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]508config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]509 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]510 depends on MFD_WM831X
511 help
512 Support the voltage and current regulators of the WM831x series
513 of PMIC devices.
514
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]515config REGULATOR_WM8350
516 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
517 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]518 help
519 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]520 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]521
522config REGULATOR_WM8400
523 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
524 depends on MFD_WM8400
525 help
526 This driver provides support for the voltage regulators of the
527 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]528
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]529config REGULATOR_WM8994
530 tristate "Wolfson Microelectronics WM8994 CODEC"
531 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]532 help
533 This driver provides support for the voltage regulators on the
534 WM8994 CODEC.
535
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]536endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]537