Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2 | * Serial port driver for the ETRAX 100LX chip |
| 3 | * |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4 | * Copyright (C) 1998-2007 Axis Communications AB |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 5 | * |
| 6 | * Many, many authors. Based once upon a time on serial.c for 16x50. |
| 7 | * |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | static char *serial_version = "$Revision: 1.25 $"; |
| 11 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 12 | #include <linux/types.h> |
| 13 | #include <linux/errno.h> |
| 14 | #include <linux/signal.h> |
| 15 | #include <linux/sched.h> |
| 16 | #include <linux/timer.h> |
| 17 | #include <linux/interrupt.h> |
| 18 | #include <linux/tty.h> |
| 19 | #include <linux/tty_flip.h> |
| 20 | #include <linux/major.h> |
| 21 | #include <linux/string.h> |
| 22 | #include <linux/fcntl.h> |
| 23 | #include <linux/mm.h> |
| 24 | #include <linux/slab.h> |
| 25 | #include <linux/init.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 26 | #include <linux/kernel.h> |
Arjan van de Ven | f392ecf | 2006-01-12 18:44:32 +0000 | [diff] [blame] | 27 | #include <linux/mutex.h> |
Jiri Slaby | 1977f03 | 2007-10-18 23:40:25 -0700 | [diff] [blame] | 28 | #include <linux/bitops.h> |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 29 | #include <linux/seq_file.h> |
| 30 | #include <linux/delay.h> |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/uaccess.h> |
| 33 | #include <linux/io.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 34 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 35 | #include <asm/irq.h> |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 36 | #include <asm/dma.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 37 | |
Jesper Nilsson | 556dcee | 2008-10-21 17:45:58 +0200 | [diff] [blame] | 38 | #include <arch/svinto.h> |
David Howells | b1a154d | 2012-03-28 18:30:02 +0100 | [diff] [blame] | 39 | #include <arch/system.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 40 | |
| 41 | /* non-arch dependent serial structures are in linux/serial.h */ |
| 42 | #include <linux/serial.h> |
| 43 | /* while we keep our own stuff (struct e100_serial) in a local .h file */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 44 | #include "crisv10.h" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 45 | #include <asm/fasttimer.h> |
Jesper Nilsson | 556dcee | 2008-10-21 17:45:58 +0200 | [diff] [blame] | 46 | #include <arch/io_interface_mux.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 47 | |
| 48 | #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER |
| 49 | #ifndef CONFIG_ETRAX_FAST_TIMER |
| 50 | #error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" |
| 51 | #endif |
| 52 | #endif |
| 53 | |
| 54 | #if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ |
| 55 | (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) |
| 56 | #error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" |
| 57 | #endif |
| 58 | |
| 59 | #if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) |
| 60 | #error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" |
| 61 | #endif |
| 62 | |
| 63 | /* |
| 64 | * All of the compatibilty code so we can compile serial.c against |
| 65 | * older kernels is hidden in serial_compat.h |
| 66 | */ |
| 67 | #if defined(LOCAL_HEADERS) |
| 68 | #include "serial_compat.h" |
| 69 | #endif |
| 70 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 71 | struct tty_driver *serial_driver; |
| 72 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 73 | /* number of characters left in xmit buffer before we ask for more */ |
| 74 | #define WAKEUP_CHARS 256 |
| 75 | |
| 76 | //#define SERIAL_DEBUG_INTR |
| 77 | //#define SERIAL_DEBUG_OPEN |
| 78 | //#define SERIAL_DEBUG_FLOW |
| 79 | //#define SERIAL_DEBUG_DATA |
| 80 | //#define SERIAL_DEBUG_THROTTLE |
| 81 | //#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ |
| 82 | //#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ |
| 83 | |
| 84 | /* Enable this to use serial interrupts to handle when you |
| 85 | expect the first received event on the serial port to |
| 86 | be an error, break or similar. Used to be able to flash IRMA |
| 87 | from eLinux */ |
| 88 | #define SERIAL_HANDLE_EARLY_ERRORS |
| 89 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 90 | /* Currently 16 descriptors x 128 bytes = 2048 bytes */ |
| 91 | #define SERIAL_DESCR_BUF_SIZE 256 |
| 92 | |
| 93 | #define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ |
| 94 | #define DEF_BAUD_BASE SERIAL_PRESCALE_BASE |
| 95 | |
| 96 | /* We don't want to load the system with massive fast timer interrupt |
| 97 | * on high baudrates so limit it to 250 us (4kHz) */ |
| 98 | #define MIN_FLUSH_TIME_USEC 250 |
| 99 | |
| 100 | /* Add an x here to log a lot of timer stuff */ |
| 101 | #define TIMERD(x) |
| 102 | /* Debug details of interrupt handling */ |
| 103 | #define DINTR1(x) /* irq on/off, errors */ |
| 104 | #define DINTR2(x) /* tx and rx */ |
| 105 | /* Debug flip buffer stuff */ |
| 106 | #define DFLIP(x) |
| 107 | /* Debug flow control and overview of data flow */ |
| 108 | #define DFLOW(x) |
| 109 | #define DBAUD(x) |
| 110 | #define DLOG_INT_TRIG(x) |
| 111 | |
| 112 | //#define DEBUG_LOG_INCLUDED |
| 113 | #ifndef DEBUG_LOG_INCLUDED |
| 114 | #define DEBUG_LOG(line, string, value) |
| 115 | #else |
| 116 | struct debug_log_info |
| 117 | { |
| 118 | unsigned long time; |
| 119 | unsigned long timer_data; |
| 120 | // int line; |
| 121 | const char *string; |
| 122 | int value; |
| 123 | }; |
| 124 | #define DEBUG_LOG_SIZE 4096 |
| 125 | |
| 126 | struct debug_log_info debug_log[DEBUG_LOG_SIZE]; |
| 127 | int debug_log_pos = 0; |
| 128 | |
| 129 | #define DEBUG_LOG(_line, _string, _value) do { \ |
| 130 | if ((_line) == SERIAL_DEBUG_LINE) {\ |
| 131 | debug_log_func(_line, _string, _value); \ |
| 132 | }\ |
| 133 | }while(0) |
| 134 | |
| 135 | void debug_log_func(int line, const char *string, int value) |
| 136 | { |
| 137 | if (debug_log_pos < DEBUG_LOG_SIZE) { |
| 138 | debug_log[debug_log_pos].time = jiffies; |
| 139 | debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; |
| 140 | // debug_log[debug_log_pos].line = line; |
| 141 | debug_log[debug_log_pos].string = string; |
| 142 | debug_log[debug_log_pos].value = value; |
| 143 | debug_log_pos++; |
| 144 | } |
| 145 | /*printk(string, value);*/ |
| 146 | } |
| 147 | #endif |
| 148 | |
| 149 | #ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS |
| 150 | /* Default number of timer ticks before flushing rx fifo |
| 151 | * When using "little data, low latency applications: use 0 |
| 152 | * When using "much data applications (PPP)" use ~5 |
| 153 | */ |
| 154 | #define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 |
| 155 | #endif |
| 156 | |
| 157 | unsigned long timer_data_to_ns(unsigned long timer_data); |
| 158 | |
| 159 | static void change_speed(struct e100_serial *info); |
| 160 | static void rs_throttle(struct tty_struct * tty); |
| 161 | static void rs_wait_until_sent(struct tty_struct *tty, int timeout); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 162 | static int rs_write(struct tty_struct *tty, |
| 163 | const unsigned char *buf, int count); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 164 | #ifdef CONFIG_ETRAX_RS485 |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 165 | static int e100_write_rs485(struct tty_struct *tty, |
| 166 | const unsigned char *buf, int count); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 167 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 168 | static int get_lsr_info(struct e100_serial *info, unsigned int *value); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 169 | |
| 170 | |
| 171 | #define DEF_BAUD 115200 /* 115.2 kbit/s */ |
| 172 | #define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) |
| 173 | #define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ |
| 174 | /* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ |
| 175 | #define DEF_TX 0x80 /* or SERIAL_CTRL_B */ |
| 176 | |
| 177 | /* offsets from R_SERIALx_CTRL */ |
| 178 | |
| 179 | #define REG_DATA 0 |
| 180 | #define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ |
| 181 | #define REG_TR_DATA 0 |
| 182 | #define REG_STATUS 1 |
| 183 | #define REG_TR_CTRL 1 |
| 184 | #define REG_REC_CTRL 2 |
| 185 | #define REG_BAUD 3 |
| 186 | #define REG_XOFF 4 /* this is a 32 bit register */ |
| 187 | |
| 188 | /* The bitfields are the same for all serial ports */ |
| 189 | #define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) |
| 190 | #define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) |
| 191 | #define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) |
| 192 | #define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) |
| 193 | #define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) |
| 194 | |
| 195 | #define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) |
| 196 | |
| 197 | /* Values for info->errorcode */ |
| 198 | #define ERRCODE_SET_BREAK (TTY_BREAK) |
| 199 | #define ERRCODE_INSERT 0x100 |
| 200 | #define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) |
| 201 | |
| 202 | #define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; |
| 203 | |
| 204 | /* |
| 205 | * General note regarding the use of IO_* macros in this file: |
| 206 | * |
| 207 | * We will use the bits defined for DMA channel 6 when using various |
| 208 | * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are |
| 209 | * the same for all channels (which of course they are). |
| 210 | * |
| 211 | * We will also use the bits defined for serial port 0 when writing commands |
| 212 | * to the different ports, as these bits too are the same for all ports. |
| 213 | */ |
| 214 | |
| 215 | |
| 216 | /* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ |
| 217 | static const unsigned long e100_ser_int_mask = 0 |
| 218 | #ifdef CONFIG_ETRAX_SERIAL_PORT0 |
| 219 | | IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
| 220 | #endif |
| 221 | #ifdef CONFIG_ETRAX_SERIAL_PORT1 |
| 222 | | IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
| 223 | #endif |
| 224 | #ifdef CONFIG_ETRAX_SERIAL_PORT2 |
| 225 | | IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
| 226 | #endif |
| 227 | #ifdef CONFIG_ETRAX_SERIAL_PORT3 |
| 228 | | IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) |
| 229 | #endif |
| 230 | ; |
| 231 | unsigned long r_alt_ser_baudrate_shadow = 0; |
| 232 | |
| 233 | /* this is the data for the four serial ports in the etrax100 */ |
| 234 | /* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ |
| 235 | /* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ |
| 236 | |
| 237 | static struct e100_serial rs_table[] = { |
| 238 | { .baud = DEF_BAUD, |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 239 | .ioport = (unsigned char *)R_SERIAL0_CTRL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 240 | .irq = 1U << 12, /* uses DMA 6 and 7 */ |
| 241 | .oclrintradr = R_DMA_CH6_CLR_INTR, |
| 242 | .ofirstadr = R_DMA_CH6_FIRST, |
| 243 | .ocmdadr = R_DMA_CH6_CMD, |
| 244 | .ostatusadr = R_DMA_CH6_STATUS, |
| 245 | .iclrintradr = R_DMA_CH7_CLR_INTR, |
| 246 | .ifirstadr = R_DMA_CH7_FIRST, |
| 247 | .icmdadr = R_DMA_CH7_CMD, |
| 248 | .idescradr = R_DMA_CH7_DESCR, |
| 249 | .flags = STD_FLAGS, |
| 250 | .rx_ctrl = DEF_RX, |
| 251 | .tx_ctrl = DEF_TX, |
| 252 | .iseteop = 2, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 253 | .dma_owner = dma_ser0, |
| 254 | .io_if = if_serial_0, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 255 | #ifdef CONFIG_ETRAX_SERIAL_PORT0 |
| 256 | .enabled = 1, |
| 257 | #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT |
| 258 | .dma_out_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 259 | .dma_out_nbr = SER0_TX_DMA_NBR, |
| 260 | .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 261 | .dma_out_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 262 | .dma_out_irq_description = "serial 0 dma tr", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 263 | #else |
| 264 | .dma_out_enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 265 | .dma_out_nbr = UINT_MAX, |
| 266 | .dma_out_irq_nbr = 0, |
| 267 | .dma_out_irq_flags = 0, |
| 268 | .dma_out_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 269 | #endif |
| 270 | #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN |
| 271 | .dma_in_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 272 | .dma_in_nbr = SER0_RX_DMA_NBR, |
| 273 | .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 274 | .dma_in_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 275 | .dma_in_irq_description = "serial 0 dma rec", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 276 | #else |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 277 | .dma_in_enabled = 0, |
| 278 | .dma_in_nbr = UINT_MAX, |
| 279 | .dma_in_irq_nbr = 0, |
| 280 | .dma_in_irq_flags = 0, |
| 281 | .dma_in_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 282 | #endif |
| 283 | #else |
| 284 | .enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 285 | .io_if_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 286 | .dma_out_enabled = 0, |
| 287 | .dma_in_enabled = 0 |
| 288 | #endif |
| 289 | |
| 290 | }, /* ttyS0 */ |
| 291 | #ifndef CONFIG_SVINTO_SIM |
| 292 | { .baud = DEF_BAUD, |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 293 | .ioport = (unsigned char *)R_SERIAL1_CTRL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 294 | .irq = 1U << 16, /* uses DMA 8 and 9 */ |
| 295 | .oclrintradr = R_DMA_CH8_CLR_INTR, |
| 296 | .ofirstadr = R_DMA_CH8_FIRST, |
| 297 | .ocmdadr = R_DMA_CH8_CMD, |
| 298 | .ostatusadr = R_DMA_CH8_STATUS, |
| 299 | .iclrintradr = R_DMA_CH9_CLR_INTR, |
| 300 | .ifirstadr = R_DMA_CH9_FIRST, |
| 301 | .icmdadr = R_DMA_CH9_CMD, |
| 302 | .idescradr = R_DMA_CH9_DESCR, |
| 303 | .flags = STD_FLAGS, |
| 304 | .rx_ctrl = DEF_RX, |
| 305 | .tx_ctrl = DEF_TX, |
| 306 | .iseteop = 3, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 307 | .dma_owner = dma_ser1, |
| 308 | .io_if = if_serial_1, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 309 | #ifdef CONFIG_ETRAX_SERIAL_PORT1 |
| 310 | .enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 311 | .io_if_description = "ser1", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 312 | #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT |
| 313 | .dma_out_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 314 | .dma_out_nbr = SER1_TX_DMA_NBR, |
| 315 | .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 316 | .dma_out_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 317 | .dma_out_irq_description = "serial 1 dma tr", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 318 | #else |
| 319 | .dma_out_enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 320 | .dma_out_nbr = UINT_MAX, |
| 321 | .dma_out_irq_nbr = 0, |
| 322 | .dma_out_irq_flags = 0, |
| 323 | .dma_out_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 324 | #endif |
| 325 | #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN |
| 326 | .dma_in_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 327 | .dma_in_nbr = SER1_RX_DMA_NBR, |
| 328 | .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 329 | .dma_in_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 330 | .dma_in_irq_description = "serial 1 dma rec", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 331 | #else |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 332 | .dma_in_enabled = 0, |
| 333 | .dma_in_enabled = 0, |
| 334 | .dma_in_nbr = UINT_MAX, |
| 335 | .dma_in_irq_nbr = 0, |
| 336 | .dma_in_irq_flags = 0, |
| 337 | .dma_in_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 338 | #endif |
| 339 | #else |
| 340 | .enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 341 | .io_if_description = NULL, |
| 342 | .dma_in_irq_nbr = 0, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 343 | .dma_out_enabled = 0, |
| 344 | .dma_in_enabled = 0 |
| 345 | #endif |
| 346 | }, /* ttyS1 */ |
| 347 | |
| 348 | { .baud = DEF_BAUD, |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 349 | .ioport = (unsigned char *)R_SERIAL2_CTRL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 350 | .irq = 1U << 4, /* uses DMA 2 and 3 */ |
| 351 | .oclrintradr = R_DMA_CH2_CLR_INTR, |
| 352 | .ofirstadr = R_DMA_CH2_FIRST, |
| 353 | .ocmdadr = R_DMA_CH2_CMD, |
| 354 | .ostatusadr = R_DMA_CH2_STATUS, |
| 355 | .iclrintradr = R_DMA_CH3_CLR_INTR, |
| 356 | .ifirstadr = R_DMA_CH3_FIRST, |
| 357 | .icmdadr = R_DMA_CH3_CMD, |
| 358 | .idescradr = R_DMA_CH3_DESCR, |
| 359 | .flags = STD_FLAGS, |
| 360 | .rx_ctrl = DEF_RX, |
| 361 | .tx_ctrl = DEF_TX, |
| 362 | .iseteop = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 363 | .dma_owner = dma_ser2, |
| 364 | .io_if = if_serial_2, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 365 | #ifdef CONFIG_ETRAX_SERIAL_PORT2 |
| 366 | .enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 367 | .io_if_description = "ser2", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 368 | #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT |
| 369 | .dma_out_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 370 | .dma_out_nbr = SER2_TX_DMA_NBR, |
| 371 | .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 372 | .dma_out_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 373 | .dma_out_irq_description = "serial 2 dma tr", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 374 | #else |
| 375 | .dma_out_enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 376 | .dma_out_nbr = UINT_MAX, |
| 377 | .dma_out_irq_nbr = 0, |
| 378 | .dma_out_irq_flags = 0, |
| 379 | .dma_out_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 380 | #endif |
| 381 | #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN |
| 382 | .dma_in_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 383 | .dma_in_nbr = SER2_RX_DMA_NBR, |
| 384 | .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 385 | .dma_in_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 386 | .dma_in_irq_description = "serial 2 dma rec", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 387 | #else |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 388 | .dma_in_enabled = 0, |
| 389 | .dma_in_nbr = UINT_MAX, |
| 390 | .dma_in_irq_nbr = 0, |
| 391 | .dma_in_irq_flags = 0, |
| 392 | .dma_in_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 393 | #endif |
| 394 | #else |
| 395 | .enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 396 | .io_if_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 397 | .dma_out_enabled = 0, |
| 398 | .dma_in_enabled = 0 |
| 399 | #endif |
| 400 | }, /* ttyS2 */ |
| 401 | |
| 402 | { .baud = DEF_BAUD, |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 403 | .ioport = (unsigned char *)R_SERIAL3_CTRL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 404 | .irq = 1U << 8, /* uses DMA 4 and 5 */ |
| 405 | .oclrintradr = R_DMA_CH4_CLR_INTR, |
| 406 | .ofirstadr = R_DMA_CH4_FIRST, |
| 407 | .ocmdadr = R_DMA_CH4_CMD, |
| 408 | .ostatusadr = R_DMA_CH4_STATUS, |
| 409 | .iclrintradr = R_DMA_CH5_CLR_INTR, |
| 410 | .ifirstadr = R_DMA_CH5_FIRST, |
| 411 | .icmdadr = R_DMA_CH5_CMD, |
| 412 | .idescradr = R_DMA_CH5_DESCR, |
| 413 | .flags = STD_FLAGS, |
| 414 | .rx_ctrl = DEF_RX, |
| 415 | .tx_ctrl = DEF_TX, |
| 416 | .iseteop = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 417 | .dma_owner = dma_ser3, |
| 418 | .io_if = if_serial_3, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 419 | #ifdef CONFIG_ETRAX_SERIAL_PORT3 |
| 420 | .enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 421 | .io_if_description = "ser3", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 422 | #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT |
| 423 | .dma_out_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 424 | .dma_out_nbr = SER3_TX_DMA_NBR, |
| 425 | .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 426 | .dma_out_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 427 | .dma_out_irq_description = "serial 3 dma tr", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 428 | #else |
| 429 | .dma_out_enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 430 | .dma_out_nbr = UINT_MAX, |
| 431 | .dma_out_irq_nbr = 0, |
| 432 | .dma_out_irq_flags = 0, |
| 433 | .dma_out_irq_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 434 | #endif |
| 435 | #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN |
| 436 | .dma_in_enabled = 1, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 437 | .dma_in_nbr = SER3_RX_DMA_NBR, |
| 438 | .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 439 | .dma_in_irq_flags = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 440 | .dma_in_irq_description = "serial 3 dma rec", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 441 | #else |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 442 | .dma_in_enabled = 0, |
| 443 | .dma_in_nbr = UINT_MAX, |
| 444 | .dma_in_irq_nbr = 0, |
| 445 | .dma_in_irq_flags = 0, |
| 446 | .dma_in_irq_description = NULL |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 447 | #endif |
| 448 | #else |
| 449 | .enabled = 0, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 450 | .io_if_description = NULL, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 451 | .dma_out_enabled = 0, |
| 452 | .dma_in_enabled = 0 |
| 453 | #endif |
| 454 | } /* ttyS3 */ |
| 455 | #endif |
| 456 | }; |
| 457 | |
| 458 | |
| 459 | #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) |
| 460 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 461 | #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER |
| 462 | static struct fast_timer fast_timers[NR_PORTS]; |
| 463 | #endif |
| 464 | |
| 465 | #ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY |
| 466 | #define PROCSTAT(x) x |
| 467 | struct ser_statistics_type { |
| 468 | int overrun_cnt; |
| 469 | int early_errors_cnt; |
| 470 | int ser_ints_ok_cnt; |
| 471 | int errors_cnt; |
| 472 | unsigned long int processing_flip; |
| 473 | unsigned long processing_flip_still_room; |
| 474 | unsigned long int timeout_flush_cnt; |
| 475 | int rx_dma_ints; |
| 476 | int tx_dma_ints; |
| 477 | int rx_tot; |
| 478 | int tx_tot; |
| 479 | }; |
| 480 | |
| 481 | static struct ser_statistics_type ser_stat[NR_PORTS]; |
| 482 | |
| 483 | #else |
| 484 | |
| 485 | #define PROCSTAT(x) |
| 486 | |
| 487 | #endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ |
| 488 | |
| 489 | /* RS-485 */ |
| 490 | #if defined(CONFIG_ETRAX_RS485) |
| 491 | #ifdef CONFIG_ETRAX_FAST_TIMER |
| 492 | static struct fast_timer fast_timers_rs485[NR_PORTS]; |
| 493 | #endif |
| 494 | #if defined(CONFIG_ETRAX_RS485_ON_PA) |
| 495 | static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; |
| 496 | #endif |
| 497 | #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) |
| 498 | static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; |
| 499 | #endif |
| 500 | #endif |
| 501 | |
| 502 | /* Info and macros needed for each ports extra control/status signals. */ |
| 503 | #define E100_STRUCT_PORT(line, pinname) \ |
| 504 | ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ |
| 505 | (R_PORT_PA_DATA): ( \ |
| 506 | (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ |
| 507 | (R_PORT_PB_DATA):&dummy_ser[line])) |
| 508 | |
| 509 | #define E100_STRUCT_SHADOW(line, pinname) \ |
| 510 | ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ |
| 511 | (&port_pa_data_shadow): ( \ |
| 512 | (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ |
| 513 | (&port_pb_data_shadow):&dummy_ser[line])) |
| 514 | #define E100_STRUCT_MASK(line, pinname) \ |
| 515 | ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ |
| 516 | (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \ |
| 517 | (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ |
| 518 | (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK)) |
| 519 | |
| 520 | #define DUMMY_DTR_MASK 1 |
| 521 | #define DUMMY_RI_MASK 2 |
| 522 | #define DUMMY_DSR_MASK 4 |
| 523 | #define DUMMY_CD_MASK 8 |
| 524 | static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF}; |
| 525 | |
| 526 | /* If not all status pins are used or disabled, use mixed mode */ |
| 527 | #ifdef CONFIG_ETRAX_SERIAL_PORT0 |
| 528 | |
| 529 | #define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT) |
| 530 | |
| 531 | #if SER0_PA_BITSUM != -4 |
| 532 | # if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1 |
| 533 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 534 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 535 | # endif |
| 536 | # endif |
| 537 | # if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1 |
| 538 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 539 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 540 | # endif |
| 541 | # endif |
| 542 | # if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1 |
| 543 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 544 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 545 | # endif |
| 546 | # endif |
| 547 | # if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1 |
| 548 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 549 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 550 | # endif |
| 551 | # endif |
| 552 | #endif |
| 553 | |
| 554 | #define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT) |
| 555 | |
| 556 | #if SER0_PB_BITSUM != -4 |
| 557 | # if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1 |
| 558 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 559 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 560 | # endif |
| 561 | # endif |
| 562 | # if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1 |
| 563 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 564 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 565 | # endif |
| 566 | # endif |
| 567 | # if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1 |
| 568 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 569 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 570 | # endif |
| 571 | # endif |
| 572 | # if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1 |
| 573 | # ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED |
| 574 | # define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 |
| 575 | # endif |
| 576 | # endif |
| 577 | #endif |
| 578 | |
| 579 | #endif /* PORT0 */ |
| 580 | |
| 581 | |
| 582 | #ifdef CONFIG_ETRAX_SERIAL_PORT1 |
| 583 | |
| 584 | #define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT) |
| 585 | |
| 586 | #if SER1_PA_BITSUM != -4 |
| 587 | # if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1 |
| 588 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 589 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 590 | # endif |
| 591 | # endif |
| 592 | # if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1 |
| 593 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 594 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 595 | # endif |
| 596 | # endif |
| 597 | # if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1 |
| 598 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 599 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 600 | # endif |
| 601 | # endif |
| 602 | # if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1 |
| 603 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 604 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 605 | # endif |
| 606 | # endif |
| 607 | #endif |
| 608 | |
| 609 | #define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT) |
| 610 | |
| 611 | #if SER1_PB_BITSUM != -4 |
| 612 | # if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1 |
| 613 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 614 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 615 | # endif |
| 616 | # endif |
| 617 | # if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1 |
| 618 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 619 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 620 | # endif |
| 621 | # endif |
| 622 | # if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1 |
| 623 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 624 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 625 | # endif |
| 626 | # endif |
| 627 | # if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1 |
| 628 | # ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED |
| 629 | # define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 |
| 630 | # endif |
| 631 | # endif |
| 632 | #endif |
| 633 | |
| 634 | #endif /* PORT1 */ |
| 635 | |
| 636 | #ifdef CONFIG_ETRAX_SERIAL_PORT2 |
| 637 | |
| 638 | #define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT) |
| 639 | |
| 640 | #if SER2_PA_BITSUM != -4 |
| 641 | # if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1 |
| 642 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 643 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 644 | # endif |
| 645 | # endif |
| 646 | # if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1 |
| 647 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 648 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 649 | # endif |
| 650 | # endif |
| 651 | # if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1 |
| 652 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 653 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 654 | # endif |
| 655 | # endif |
| 656 | # if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1 |
| 657 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 658 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 659 | # endif |
| 660 | # endif |
| 661 | #endif |
| 662 | |
| 663 | #define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT) |
| 664 | |
| 665 | #if SER2_PB_BITSUM != -4 |
| 666 | # if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1 |
| 667 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 668 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 669 | # endif |
| 670 | # endif |
| 671 | # if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1 |
| 672 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 673 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 674 | # endif |
| 675 | # endif |
| 676 | # if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1 |
| 677 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 678 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 679 | # endif |
| 680 | # endif |
| 681 | # if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1 |
| 682 | # ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED |
| 683 | # define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 |
| 684 | # endif |
| 685 | # endif |
| 686 | #endif |
| 687 | |
| 688 | #endif /* PORT2 */ |
| 689 | |
| 690 | #ifdef CONFIG_ETRAX_SERIAL_PORT3 |
| 691 | |
| 692 | #define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT) |
| 693 | |
| 694 | #if SER3_PA_BITSUM != -4 |
| 695 | # if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1 |
| 696 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 697 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 698 | # endif |
| 699 | # endif |
| 700 | # if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1 |
| 701 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 702 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 703 | # endif |
| 704 | # endif |
| 705 | # if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1 |
| 706 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 707 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 708 | # endif |
| 709 | # endif |
| 710 | # if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1 |
| 711 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 712 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 713 | # endif |
| 714 | # endif |
| 715 | #endif |
| 716 | |
| 717 | #define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT) |
| 718 | |
| 719 | #if SER3_PB_BITSUM != -4 |
| 720 | # if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1 |
| 721 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 722 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 723 | # endif |
| 724 | # endif |
| 725 | # if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1 |
| 726 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 727 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 728 | # endif |
| 729 | # endif |
| 730 | # if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1 |
| 731 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 732 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 733 | # endif |
| 734 | # endif |
| 735 | # if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1 |
| 736 | # ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED |
| 737 | # define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 |
| 738 | # endif |
| 739 | # endif |
| 740 | #endif |
| 741 | |
| 742 | #endif /* PORT3 */ |
| 743 | |
| 744 | |
| 745 | #if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \ |
| 746 | defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \ |
| 747 | defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \ |
| 748 | defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED) |
| 749 | #define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED |
| 750 | #endif |
| 751 | |
| 752 | #ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED |
| 753 | /* The pins can be mixed on PA and PB */ |
| 754 | #define CONTROL_PINS_PORT_NOT_USED(line) \ |
| 755 | &dummy_ser[line], &dummy_ser[line], \ |
| 756 | &dummy_ser[line], &dummy_ser[line], \ |
| 757 | &dummy_ser[line], &dummy_ser[line], \ |
| 758 | &dummy_ser[line], &dummy_ser[line], \ |
| 759 | DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK |
| 760 | |
| 761 | |
| 762 | struct control_pins |
| 763 | { |
| 764 | volatile unsigned char *dtr_port; |
| 765 | unsigned char *dtr_shadow; |
| 766 | volatile unsigned char *ri_port; |
| 767 | unsigned char *ri_shadow; |
| 768 | volatile unsigned char *dsr_port; |
| 769 | unsigned char *dsr_shadow; |
| 770 | volatile unsigned char *cd_port; |
| 771 | unsigned char *cd_shadow; |
| 772 | |
| 773 | unsigned char dtr_mask; |
| 774 | unsigned char ri_mask; |
| 775 | unsigned char dsr_mask; |
| 776 | unsigned char cd_mask; |
| 777 | }; |
| 778 | |
| 779 | static const struct control_pins e100_modem_pins[NR_PORTS] = |
| 780 | { |
| 781 | /* Ser 0 */ |
| 782 | { |
| 783 | #ifdef CONFIG_ETRAX_SERIAL_PORT0 |
| 784 | E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR), |
| 785 | E100_STRUCT_PORT(0,RI), E100_STRUCT_SHADOW(0,RI), |
| 786 | E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR), |
| 787 | E100_STRUCT_PORT(0,CD), E100_STRUCT_SHADOW(0,CD), |
| 788 | E100_STRUCT_MASK(0,DTR), |
| 789 | E100_STRUCT_MASK(0,RI), |
| 790 | E100_STRUCT_MASK(0,DSR), |
| 791 | E100_STRUCT_MASK(0,CD) |
| 792 | #else |
| 793 | CONTROL_PINS_PORT_NOT_USED(0) |
| 794 | #endif |
| 795 | }, |
| 796 | |
| 797 | /* Ser 1 */ |
| 798 | { |
| 799 | #ifdef CONFIG_ETRAX_SERIAL_PORT1 |
| 800 | E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR), |
| 801 | E100_STRUCT_PORT(1,RI), E100_STRUCT_SHADOW(1,RI), |
| 802 | E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR), |
| 803 | E100_STRUCT_PORT(1,CD), E100_STRUCT_SHADOW(1,CD), |
| 804 | E100_STRUCT_MASK(1,DTR), |
| 805 | E100_STRUCT_MASK(1,RI), |
| 806 | E100_STRUCT_MASK(1,DSR), |
| 807 | E100_STRUCT_MASK(1,CD) |
| 808 | #else |
| 809 | CONTROL_PINS_PORT_NOT_USED(1) |
| 810 | #endif |
| 811 | }, |
| 812 | |
| 813 | /* Ser 2 */ |
| 814 | { |
| 815 | #ifdef CONFIG_ETRAX_SERIAL_PORT2 |
| 816 | E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR), |
| 817 | E100_STRUCT_PORT(2,RI), E100_STRUCT_SHADOW(2,RI), |
| 818 | E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR), |
| 819 | E100_STRUCT_PORT(2,CD), E100_STRUCT_SHADOW(2,CD), |
| 820 | E100_STRUCT_MASK(2,DTR), |
| 821 | E100_STRUCT_MASK(2,RI), |
| 822 | E100_STRUCT_MASK(2,DSR), |
| 823 | E100_STRUCT_MASK(2,CD) |
| 824 | #else |
| 825 | CONTROL_PINS_PORT_NOT_USED(2) |
| 826 | #endif |
| 827 | }, |
| 828 | |
| 829 | /* Ser 3 */ |
| 830 | { |
| 831 | #ifdef CONFIG_ETRAX_SERIAL_PORT3 |
| 832 | E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR), |
| 833 | E100_STRUCT_PORT(3,RI), E100_STRUCT_SHADOW(3,RI), |
| 834 | E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR), |
| 835 | E100_STRUCT_PORT(3,CD), E100_STRUCT_SHADOW(3,CD), |
| 836 | E100_STRUCT_MASK(3,DTR), |
| 837 | E100_STRUCT_MASK(3,RI), |
| 838 | E100_STRUCT_MASK(3,DSR), |
| 839 | E100_STRUCT_MASK(3,CD) |
| 840 | #else |
| 841 | CONTROL_PINS_PORT_NOT_USED(3) |
| 842 | #endif |
| 843 | } |
| 844 | }; |
| 845 | #else /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ |
| 846 | |
| 847 | /* All pins are on either PA or PB for each serial port */ |
| 848 | #define CONTROL_PINS_PORT_NOT_USED(line) \ |
| 849 | &dummy_ser[line], &dummy_ser[line], \ |
| 850 | DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK |
| 851 | |
| 852 | |
| 853 | struct control_pins |
| 854 | { |
| 855 | volatile unsigned char *port; |
| 856 | unsigned char *shadow; |
| 857 | |
| 858 | unsigned char dtr_mask; |
| 859 | unsigned char ri_mask; |
| 860 | unsigned char dsr_mask; |
| 861 | unsigned char cd_mask; |
| 862 | }; |
| 863 | |
| 864 | #define dtr_port port |
| 865 | #define dtr_shadow shadow |
| 866 | #define ri_port port |
| 867 | #define ri_shadow shadow |
| 868 | #define dsr_port port |
| 869 | #define dsr_shadow shadow |
| 870 | #define cd_port port |
| 871 | #define cd_shadow shadow |
| 872 | |
| 873 | static const struct control_pins e100_modem_pins[NR_PORTS] = |
| 874 | { |
| 875 | /* Ser 0 */ |
| 876 | { |
| 877 | #ifdef CONFIG_ETRAX_SERIAL_PORT0 |
| 878 | E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR), |
| 879 | E100_STRUCT_MASK(0,DTR), |
| 880 | E100_STRUCT_MASK(0,RI), |
| 881 | E100_STRUCT_MASK(0,DSR), |
| 882 | E100_STRUCT_MASK(0,CD) |
| 883 | #else |
| 884 | CONTROL_PINS_PORT_NOT_USED(0) |
| 885 | #endif |
| 886 | }, |
| 887 | |
| 888 | /* Ser 1 */ |
| 889 | { |
| 890 | #ifdef CONFIG_ETRAX_SERIAL_PORT1 |
| 891 | E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR), |
| 892 | E100_STRUCT_MASK(1,DTR), |
| 893 | E100_STRUCT_MASK(1,RI), |
| 894 | E100_STRUCT_MASK(1,DSR), |
| 895 | E100_STRUCT_MASK(1,CD) |
| 896 | #else |
| 897 | CONTROL_PINS_PORT_NOT_USED(1) |
| 898 | #endif |
| 899 | }, |
| 900 | |
| 901 | /* Ser 2 */ |
| 902 | { |
| 903 | #ifdef CONFIG_ETRAX_SERIAL_PORT2 |
| 904 | E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR), |
| 905 | E100_STRUCT_MASK(2,DTR), |
| 906 | E100_STRUCT_MASK(2,RI), |
| 907 | E100_STRUCT_MASK(2,DSR), |
| 908 | E100_STRUCT_MASK(2,CD) |
| 909 | #else |
| 910 | CONTROL_PINS_PORT_NOT_USED(2) |
| 911 | #endif |
| 912 | }, |
| 913 | |
| 914 | /* Ser 3 */ |
| 915 | { |
| 916 | #ifdef CONFIG_ETRAX_SERIAL_PORT3 |
| 917 | E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR), |
| 918 | E100_STRUCT_MASK(3,DTR), |
| 919 | E100_STRUCT_MASK(3,RI), |
| 920 | E100_STRUCT_MASK(3,DSR), |
| 921 | E100_STRUCT_MASK(3,CD) |
| 922 | #else |
| 923 | CONTROL_PINS_PORT_NOT_USED(3) |
| 924 | #endif |
| 925 | } |
| 926 | }; |
| 927 | #endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ |
| 928 | |
| 929 | #define E100_RTS_MASK 0x20 |
| 930 | #define E100_CTS_MASK 0x40 |
| 931 | |
| 932 | /* All serial port signals are active low: |
| 933 | * active = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level |
| 934 | * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level |
| 935 | * |
| 936 | * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip |
| 937 | */ |
| 938 | |
| 939 | /* Output */ |
| 940 | #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) |
| 941 | /* Input */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 942 | #define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 943 | |
| 944 | /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ |
| 945 | /* Is an output */ |
| 946 | #define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) |
| 947 | |
| 948 | /* Normally inputs */ |
| 949 | #define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) |
| 950 | #define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) |
| 951 | |
| 952 | /* Input */ |
| 953 | #define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) |
| 954 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 955 | /* Calculate the chartime depending on baudrate, numbor of bits etc. */ |
| 956 | static void update_char_time(struct e100_serial * info) |
| 957 | { |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 958 | tcflag_t cflags = info->port.tty->termios.c_cflag; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 959 | int bits; |
| 960 | |
| 961 | /* calc. number of bits / data byte */ |
| 962 | /* databits + startbit and 1 stopbit */ |
| 963 | if ((cflags & CSIZE) == CS7) |
| 964 | bits = 9; |
| 965 | else |
| 966 | bits = 10; |
| 967 | |
| 968 | if (cflags & CSTOPB) /* 2 stopbits ? */ |
| 969 | bits++; |
| 970 | |
| 971 | if (cflags & PARENB) /* parity bit ? */ |
| 972 | bits++; |
| 973 | |
| 974 | /* calc timeout */ |
| 975 | info->char_time_usec = ((bits * 1000000) / info->baud) + 1; |
| 976 | info->flush_time_usec = 4*info->char_time_usec; |
| 977 | if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) |
| 978 | info->flush_time_usec = MIN_FLUSH_TIME_USEC; |
| 979 | |
| 980 | } |
| 981 | |
| 982 | /* |
| 983 | * This function maps from the Bxxxx defines in asm/termbits.h into real |
| 984 | * baud rates. |
| 985 | */ |
| 986 | |
| 987 | static int |
| 988 | cflag_to_baud(unsigned int cflag) |
| 989 | { |
| 990 | static int baud_table[] = { |
| 991 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, |
| 992 | 4800, 9600, 19200, 38400 }; |
| 993 | |
| 994 | static int ext_baud_table[] = { |
| 995 | 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, |
| 996 | 0, 0, 0, 0, 0, 0, 0, 0 }; |
| 997 | |
| 998 | if (cflag & CBAUDEX) |
| 999 | return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; |
| 1000 | else |
| 1001 | return baud_table[cflag & CBAUD]; |
| 1002 | } |
| 1003 | |
| 1004 | /* and this maps to an etrax100 hardware baud constant */ |
| 1005 | |
| 1006 | static unsigned char |
| 1007 | cflag_to_etrax_baud(unsigned int cflag) |
| 1008 | { |
| 1009 | char retval; |
| 1010 | |
| 1011 | static char baud_table[] = { |
| 1012 | -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; |
| 1013 | |
| 1014 | static char ext_baud_table[] = { |
| 1015 | -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; |
| 1016 | |
| 1017 | if (cflag & CBAUDEX) |
| 1018 | retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; |
| 1019 | else |
| 1020 | retval = baud_table[cflag & CBAUD]; |
| 1021 | |
| 1022 | if (retval < 0) { |
| 1023 | printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); |
| 1024 | retval = 5; /* choose default 9600 instead */ |
| 1025 | } |
| 1026 | |
| 1027 | return retval | (retval << 4); /* choose same for both TX and RX */ |
| 1028 | } |
| 1029 | |
| 1030 | |
| 1031 | /* Various static support functions */ |
| 1032 | |
| 1033 | /* Functions to set or clear DTR/RTS on the requested line */ |
| 1034 | /* It is complicated by the fact that RTS is a serial port register, while |
| 1035 | * DTR might not be implemented in the HW at all, and if it is, it can be on |
| 1036 | * any general port. |
| 1037 | */ |
| 1038 | |
| 1039 | |
| 1040 | static inline void |
| 1041 | e100_dtr(struct e100_serial *info, int set) |
| 1042 | { |
| 1043 | #ifndef CONFIG_SVINTO_SIM |
| 1044 | unsigned char mask = e100_modem_pins[info->line].dtr_mask; |
| 1045 | |
| 1046 | #ifdef SERIAL_DEBUG_IO |
| 1047 | printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); |
| 1048 | printk("ser%i shadow before 0x%02X get: %i\n", |
| 1049 | info->line, *e100_modem_pins[info->line].dtr_shadow, |
| 1050 | E100_DTR_GET(info)); |
| 1051 | #endif |
| 1052 | /* DTR is active low */ |
| 1053 | { |
| 1054 | unsigned long flags; |
| 1055 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1056 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1057 | *e100_modem_pins[info->line].dtr_shadow &= ~mask; |
| 1058 | *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); |
| 1059 | *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1060 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1061 | } |
| 1062 | |
| 1063 | #ifdef SERIAL_DEBUG_IO |
| 1064 | printk("ser%i shadow after 0x%02X get: %i\n", |
| 1065 | info->line, *e100_modem_pins[info->line].dtr_shadow, |
| 1066 | E100_DTR_GET(info)); |
| 1067 | #endif |
| 1068 | #endif |
| 1069 | } |
| 1070 | |
| 1071 | /* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive |
| 1072 | * 0=0V , 1=3.3V |
| 1073 | */ |
| 1074 | static inline void |
| 1075 | e100_rts(struct e100_serial *info, int set) |
| 1076 | { |
| 1077 | #ifndef CONFIG_SVINTO_SIM |
| 1078 | unsigned long flags; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1079 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1080 | info->rx_ctrl &= ~E100_RTS_MASK; |
| 1081 | info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1082 | info->ioport[REG_REC_CTRL] = info->rx_ctrl; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1083 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1084 | #ifdef SERIAL_DEBUG_IO |
| 1085 | printk("ser%i rts %i\n", info->line, set); |
| 1086 | #endif |
| 1087 | #endif |
| 1088 | } |
| 1089 | |
| 1090 | |
| 1091 | /* If this behaves as a modem, RI and CD is an output */ |
| 1092 | static inline void |
| 1093 | e100_ri_out(struct e100_serial *info, int set) |
| 1094 | { |
| 1095 | #ifndef CONFIG_SVINTO_SIM |
| 1096 | /* RI is active low */ |
| 1097 | { |
| 1098 | unsigned char mask = e100_modem_pins[info->line].ri_mask; |
| 1099 | unsigned long flags; |
| 1100 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1101 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1102 | *e100_modem_pins[info->line].ri_shadow &= ~mask; |
| 1103 | *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); |
| 1104 | *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1105 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1106 | } |
| 1107 | #endif |
| 1108 | } |
| 1109 | static inline void |
| 1110 | e100_cd_out(struct e100_serial *info, int set) |
| 1111 | { |
| 1112 | #ifndef CONFIG_SVINTO_SIM |
| 1113 | /* CD is active low */ |
| 1114 | { |
| 1115 | unsigned char mask = e100_modem_pins[info->line].cd_mask; |
| 1116 | unsigned long flags; |
| 1117 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1118 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1119 | *e100_modem_pins[info->line].cd_shadow &= ~mask; |
| 1120 | *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); |
| 1121 | *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1122 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1123 | } |
| 1124 | #endif |
| 1125 | } |
| 1126 | |
| 1127 | static inline void |
| 1128 | e100_disable_rx(struct e100_serial *info) |
| 1129 | { |
| 1130 | #ifndef CONFIG_SVINTO_SIM |
| 1131 | /* disable the receiver */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1132 | info->ioport[REG_REC_CTRL] = |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1133 | (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); |
| 1134 | #endif |
| 1135 | } |
| 1136 | |
| 1137 | static inline void |
| 1138 | e100_enable_rx(struct e100_serial *info) |
| 1139 | { |
| 1140 | #ifndef CONFIG_SVINTO_SIM |
| 1141 | /* enable the receiver */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1142 | info->ioport[REG_REC_CTRL] = |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1143 | (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); |
| 1144 | #endif |
| 1145 | } |
| 1146 | |
| 1147 | /* the rx DMA uses both the dma_descr and the dma_eop interrupts */ |
| 1148 | |
| 1149 | static inline void |
| 1150 | e100_disable_rxdma_irq(struct e100_serial *info) |
| 1151 | { |
| 1152 | #ifdef SERIAL_DEBUG_INTR |
| 1153 | printk("rxdma_irq(%d): 0\n",info->line); |
| 1154 | #endif |
| 1155 | DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); |
| 1156 | *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); |
| 1157 | } |
| 1158 | |
| 1159 | static inline void |
| 1160 | e100_enable_rxdma_irq(struct e100_serial *info) |
| 1161 | { |
| 1162 | #ifdef SERIAL_DEBUG_INTR |
| 1163 | printk("rxdma_irq(%d): 1\n",info->line); |
| 1164 | #endif |
| 1165 | DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); |
| 1166 | *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); |
| 1167 | } |
| 1168 | |
| 1169 | /* the tx DMA uses only dma_descr interrupt */ |
| 1170 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1171 | static void e100_disable_txdma_irq(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1172 | { |
| 1173 | #ifdef SERIAL_DEBUG_INTR |
| 1174 | printk("txdma_irq(%d): 0\n",info->line); |
| 1175 | #endif |
| 1176 | DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); |
| 1177 | *R_IRQ_MASK2_CLR = info->irq; |
| 1178 | } |
| 1179 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1180 | static void e100_enable_txdma_irq(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1181 | { |
| 1182 | #ifdef SERIAL_DEBUG_INTR |
| 1183 | printk("txdma_irq(%d): 1\n",info->line); |
| 1184 | #endif |
| 1185 | DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); |
| 1186 | *R_IRQ_MASK2_SET = info->irq; |
| 1187 | } |
| 1188 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1189 | static void e100_disable_txdma_channel(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1190 | { |
| 1191 | unsigned long flags; |
| 1192 | |
| 1193 | /* Disable output DMA channel for the serial port in question |
Frederik Schwarzer | 025dfda | 2008-10-16 19:02:37 +0200 | [diff] [blame] | 1194 | * ( set to something other than serialX) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1195 | */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1196 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1197 | DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); |
| 1198 | if (info->line == 0) { |
| 1199 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == |
| 1200 | IO_STATE(R_GEN_CONFIG, dma6, serial0)) { |
| 1201 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); |
| 1202 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); |
| 1203 | } |
| 1204 | } else if (info->line == 1) { |
| 1205 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == |
| 1206 | IO_STATE(R_GEN_CONFIG, dma8, serial1)) { |
| 1207 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); |
| 1208 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); |
| 1209 | } |
| 1210 | } else if (info->line == 2) { |
| 1211 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == |
| 1212 | IO_STATE(R_GEN_CONFIG, dma2, serial2)) { |
| 1213 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); |
| 1214 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); |
| 1215 | } |
| 1216 | } else if (info->line == 3) { |
| 1217 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == |
| 1218 | IO_STATE(R_GEN_CONFIG, dma4, serial3)) { |
| 1219 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); |
| 1220 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); |
| 1221 | } |
| 1222 | } |
| 1223 | *R_GEN_CONFIG = genconfig_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1224 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1225 | } |
| 1226 | |
| 1227 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1228 | static void e100_enable_txdma_channel(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1229 | { |
| 1230 | unsigned long flags; |
| 1231 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1232 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1233 | DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); |
| 1234 | /* Enable output DMA channel for the serial port in question */ |
| 1235 | if (info->line == 0) { |
| 1236 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); |
| 1237 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); |
| 1238 | } else if (info->line == 1) { |
| 1239 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); |
| 1240 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); |
| 1241 | } else if (info->line == 2) { |
| 1242 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); |
| 1243 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); |
| 1244 | } else if (info->line == 3) { |
| 1245 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); |
| 1246 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); |
| 1247 | } |
| 1248 | *R_GEN_CONFIG = genconfig_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1249 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1250 | } |
| 1251 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1252 | static void e100_disable_rxdma_channel(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1253 | { |
| 1254 | unsigned long flags; |
| 1255 | |
| 1256 | /* Disable input DMA channel for the serial port in question |
Frederik Schwarzer | 025dfda | 2008-10-16 19:02:37 +0200 | [diff] [blame] | 1257 | * ( set to something other than serialX) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1258 | */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1259 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1260 | if (info->line == 0) { |
| 1261 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == |
| 1262 | IO_STATE(R_GEN_CONFIG, dma7, serial0)) { |
| 1263 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); |
| 1264 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); |
| 1265 | } |
| 1266 | } else if (info->line == 1) { |
| 1267 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == |
| 1268 | IO_STATE(R_GEN_CONFIG, dma9, serial1)) { |
| 1269 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); |
| 1270 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); |
| 1271 | } |
| 1272 | } else if (info->line == 2) { |
| 1273 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == |
| 1274 | IO_STATE(R_GEN_CONFIG, dma3, serial2)) { |
| 1275 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); |
| 1276 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); |
| 1277 | } |
| 1278 | } else if (info->line == 3) { |
| 1279 | if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == |
| 1280 | IO_STATE(R_GEN_CONFIG, dma5, serial3)) { |
| 1281 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); |
| 1282 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); |
| 1283 | } |
| 1284 | } |
| 1285 | *R_GEN_CONFIG = genconfig_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1286 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1287 | } |
| 1288 | |
| 1289 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1290 | static void e100_enable_rxdma_channel(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1291 | { |
| 1292 | unsigned long flags; |
| 1293 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1294 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1295 | /* Enable input DMA channel for the serial port in question */ |
| 1296 | if (info->line == 0) { |
| 1297 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); |
| 1298 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); |
| 1299 | } else if (info->line == 1) { |
| 1300 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); |
| 1301 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); |
| 1302 | } else if (info->line == 2) { |
| 1303 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); |
| 1304 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); |
| 1305 | } else if (info->line == 3) { |
| 1306 | genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); |
| 1307 | genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); |
| 1308 | } |
| 1309 | *R_GEN_CONFIG = genconfig_shadow; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1310 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1311 | } |
| 1312 | |
| 1313 | #ifdef SERIAL_HANDLE_EARLY_ERRORS |
| 1314 | /* in order to detect and fix errors on the first byte |
| 1315 | we have to use the serial interrupts as well. */ |
| 1316 | |
| 1317 | static inline void |
| 1318 | e100_disable_serial_data_irq(struct e100_serial *info) |
| 1319 | { |
| 1320 | #ifdef SERIAL_DEBUG_INTR |
| 1321 | printk("ser_irq(%d): 0\n",info->line); |
| 1322 | #endif |
| 1323 | DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); |
| 1324 | *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); |
| 1325 | } |
| 1326 | |
| 1327 | static inline void |
| 1328 | e100_enable_serial_data_irq(struct e100_serial *info) |
| 1329 | { |
| 1330 | #ifdef SERIAL_DEBUG_INTR |
| 1331 | printk("ser_irq(%d): 1\n",info->line); |
| 1332 | printk("**** %d = %d\n", |
| 1333 | (8+2*info->line), |
| 1334 | (1U << (8+2*info->line))); |
| 1335 | #endif |
| 1336 | DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); |
| 1337 | *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); |
| 1338 | } |
| 1339 | #endif |
| 1340 | |
| 1341 | static inline void |
| 1342 | e100_disable_serial_tx_ready_irq(struct e100_serial *info) |
| 1343 | { |
| 1344 | #ifdef SERIAL_DEBUG_INTR |
| 1345 | printk("ser_tx_irq(%d): 0\n",info->line); |
| 1346 | #endif |
| 1347 | DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); |
| 1348 | *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); |
| 1349 | } |
| 1350 | |
| 1351 | static inline void |
| 1352 | e100_enable_serial_tx_ready_irq(struct e100_serial *info) |
| 1353 | { |
| 1354 | #ifdef SERIAL_DEBUG_INTR |
| 1355 | printk("ser_tx_irq(%d): 1\n",info->line); |
| 1356 | printk("**** %d = %d\n", |
| 1357 | (8+1+2*info->line), |
| 1358 | (1U << (8+1+2*info->line))); |
| 1359 | #endif |
| 1360 | DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); |
| 1361 | *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); |
| 1362 | } |
| 1363 | |
| 1364 | static inline void e100_enable_rx_irq(struct e100_serial *info) |
| 1365 | { |
| 1366 | if (info->uses_dma_in) |
| 1367 | e100_enable_rxdma_irq(info); |
| 1368 | else |
| 1369 | e100_enable_serial_data_irq(info); |
| 1370 | } |
| 1371 | static inline void e100_disable_rx_irq(struct e100_serial *info) |
| 1372 | { |
| 1373 | if (info->uses_dma_in) |
| 1374 | e100_disable_rxdma_irq(info); |
| 1375 | else |
| 1376 | e100_disable_serial_data_irq(info); |
| 1377 | } |
| 1378 | |
| 1379 | #if defined(CONFIG_ETRAX_RS485) |
| 1380 | /* Enable RS-485 mode on selected port. This is UGLY. */ |
| 1381 | static int |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1382 | e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1383 | { |
| 1384 | struct e100_serial * info = (struct e100_serial *)tty->driver_data; |
| 1385 | |
| 1386 | #if defined(CONFIG_ETRAX_RS485_ON_PA) |
| 1387 | *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); |
| 1388 | #endif |
| 1389 | #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) |
| 1390 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 1391 | rs485_port_g_bit, 1); |
| 1392 | #endif |
| 1393 | #if defined(CONFIG_ETRAX_RS485_LTC1387) |
| 1394 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 1395 | CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); |
| 1396 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 1397 | CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); |
| 1398 | #endif |
| 1399 | |
Jesper Nilsson | c7213fc | 2010-10-28 12:08:27 +0200 | [diff] [blame] | 1400 | info->rs485 = *r; |
| 1401 | |
| 1402 | /* Maximum delay before RTS equal to 1000 */ |
| 1403 | if (info->rs485.delay_rts_before_send >= 1000) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1404 | info->rs485.delay_rts_before_send = 1000; |
Jesper Nilsson | c7213fc | 2010-10-28 12:08:27 +0200 | [diff] [blame] | 1405 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1406 | /* printk("rts: on send = %i, after = %i, enabled = %i", |
| 1407 | info->rs485.rts_on_send, |
| 1408 | info->rs485.rts_after_sent, |
| 1409 | info->rs485.enabled |
| 1410 | ); |
| 1411 | */ |
| 1412 | return 0; |
| 1413 | } |
| 1414 | |
| 1415 | static int |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1416 | e100_write_rs485(struct tty_struct *tty, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1417 | const unsigned char *buf, int count) |
| 1418 | { |
| 1419 | struct e100_serial * info = (struct e100_serial *)tty->driver_data; |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1420 | int old_value = (info->rs485.flags) & SER_RS485_ENABLED; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1421 | |
| 1422 | /* rs485 is always implicitly enabled if we're using the ioctl() |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1423 | * but it doesn't have to be set in the serial_rs485 |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1424 | * (to be backward compatible with old apps) |
| 1425 | * So we store, set and restore it. |
| 1426 | */ |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1427 | info->rs485.flags |= SER_RS485_ENABLED; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1428 | /* rs_write now deals with RS485 if enabled */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1429 | count = rs_write(tty, buf, count); |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1430 | if (!old_value) |
| 1431 | info->rs485.flags &= ~(SER_RS485_ENABLED); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1432 | return count; |
| 1433 | } |
| 1434 | |
| 1435 | #ifdef CONFIG_ETRAX_FAST_TIMER |
| 1436 | /* Timer function to toggle RTS when using FAST_TIMER */ |
| 1437 | static void rs485_toggle_rts_timer_function(unsigned long data) |
| 1438 | { |
| 1439 | struct e100_serial *info = (struct e100_serial *)data; |
| 1440 | |
| 1441 | fast_timers_rs485[info->line].function = NULL; |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1442 | e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1443 | #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) |
| 1444 | e100_enable_rx(info); |
| 1445 | e100_enable_rx_irq(info); |
| 1446 | #endif |
| 1447 | } |
| 1448 | #endif |
| 1449 | #endif /* CONFIG_ETRAX_RS485 */ |
| 1450 | |
| 1451 | /* |
| 1452 | * ------------------------------------------------------------ |
| 1453 | * rs_stop() and rs_start() |
| 1454 | * |
| 1455 | * This routines are called before setting or resetting tty->stopped. |
| 1456 | * They enable or disable transmitter using the XOFF registers, as necessary. |
| 1457 | * ------------------------------------------------------------ |
| 1458 | */ |
| 1459 | |
| 1460 | static void |
| 1461 | rs_stop(struct tty_struct *tty) |
| 1462 | { |
| 1463 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 1464 | if (info) { |
| 1465 | unsigned long flags; |
| 1466 | unsigned long xoff; |
| 1467 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1468 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1469 | DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", |
| 1470 | CIRC_CNT(info->xmit.head, |
| 1471 | info->xmit.tail,SERIAL_XMIT_SIZE))); |
| 1472 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 1473 | xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, |
| 1474 | STOP_CHAR(info->port.tty)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1475 | xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 1476 | if (tty->termios.c_iflag & IXON ) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1477 | xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); |
| 1478 | } |
| 1479 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1480 | *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1481 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1482 | } |
| 1483 | } |
| 1484 | |
| 1485 | static void |
| 1486 | rs_start(struct tty_struct *tty) |
| 1487 | { |
| 1488 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 1489 | if (info) { |
| 1490 | unsigned long flags; |
| 1491 | unsigned long xoff; |
| 1492 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1493 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1494 | DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", |
| 1495 | CIRC_CNT(info->xmit.head, |
| 1496 | info->xmit.tail,SERIAL_XMIT_SIZE))); |
| 1497 | xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); |
| 1498 | xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 1499 | if (tty->termios.c_iflag & IXON ) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1500 | xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); |
| 1501 | } |
| 1502 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1503 | *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1504 | if (!info->uses_dma_out && |
| 1505 | info->xmit.head != info->xmit.tail && info->xmit.buf) |
| 1506 | e100_enable_serial_tx_ready_irq(info); |
| 1507 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1508 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1509 | } |
| 1510 | } |
| 1511 | |
| 1512 | /* |
| 1513 | * ---------------------------------------------------------------------- |
| 1514 | * |
| 1515 | * Here starts the interrupt handling routines. All of the following |
| 1516 | * subroutines are declared as inline and are folded into |
| 1517 | * rs_interrupt(). They were separated out for readability's sake. |
| 1518 | * |
| 1519 | * Note: rs_interrupt() is a "fast" interrupt, which means that it |
| 1520 | * runs with interrupts turned off. People who may want to modify |
| 1521 | * rs_interrupt() should try to keep the interrupt handler as fast as |
| 1522 | * possible. After you are done making modifications, it is not a bad |
| 1523 | * idea to do: |
| 1524 | * |
| 1525 | * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c |
| 1526 | * |
| 1527 | * and look at the resulting assemble code in serial.s. |
| 1528 | * |
| 1529 | * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 |
| 1530 | * ----------------------------------------------------------------------- |
| 1531 | */ |
| 1532 | |
| 1533 | /* |
| 1534 | * This routine is used by the interrupt handler to schedule |
| 1535 | * processing in the software interrupt portion of the driver. |
| 1536 | */ |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1537 | static void rs_sched_event(struct e100_serial *info, int event) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1538 | { |
| 1539 | if (info->event & (1 << event)) |
| 1540 | return; |
| 1541 | info->event |= 1 << event; |
| 1542 | schedule_work(&info->work); |
| 1543 | } |
| 1544 | |
| 1545 | /* The output DMA channel is free - use it to send as many chars as possible |
| 1546 | * NOTES: |
| 1547 | * We don't pay attention to info->x_char, which means if the TTY wants to |
| 1548 | * use XON/XOFF it will set info->x_char but we won't send any X char! |
| 1549 | * |
| 1550 | * To implement this, we'd just start a DMA send of 1 byte pointing at a |
| 1551 | * buffer containing the X char, and skip updating xmit. We'd also have to |
| 1552 | * check if the last sent char was the X char when we enter this function |
| 1553 | * the next time, to avoid updating xmit with the sent X value. |
| 1554 | */ |
| 1555 | |
| 1556 | static void |
| 1557 | transmit_chars_dma(struct e100_serial *info) |
| 1558 | { |
| 1559 | unsigned int c, sentl; |
| 1560 | struct etrax_dma_descr *descr; |
| 1561 | |
| 1562 | #ifdef CONFIG_SVINTO_SIM |
| 1563 | /* This will output too little if tail is not 0 always since |
| 1564 | * we don't reloop to send the other part. Anyway this SHOULD be a |
| 1565 | * no-op - transmit_chars_dma would never really be called during sim |
| 1566 | * since rs_write does not write into the xmit buffer then. |
| 1567 | */ |
| 1568 | if (info->xmit.tail) |
| 1569 | printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); |
| 1570 | if (info->xmit.head != info->xmit.tail) { |
| 1571 | SIMCOUT(info->xmit.buf + info->xmit.tail, |
| 1572 | CIRC_CNT(info->xmit.head, |
| 1573 | info->xmit.tail, |
| 1574 | SERIAL_XMIT_SIZE)); |
| 1575 | info->xmit.head = info->xmit.tail; /* move back head */ |
| 1576 | info->tr_running = 0; |
| 1577 | } |
| 1578 | return; |
| 1579 | #endif |
| 1580 | /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ |
| 1581 | *info->oclrintradr = |
| 1582 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | |
| 1583 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); |
| 1584 | |
| 1585 | #ifdef SERIAL_DEBUG_INTR |
| 1586 | if (info->line == SERIAL_DEBUG_LINE) |
| 1587 | printk("tc\n"); |
| 1588 | #endif |
| 1589 | if (!info->tr_running) { |
| 1590 | /* weirdo... we shouldn't get here! */ |
| 1591 | printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); |
| 1592 | return; |
| 1593 | } |
| 1594 | |
| 1595 | descr = &info->tr_descr; |
| 1596 | |
| 1597 | /* first get the amount of bytes sent during the last DMA transfer, |
| 1598 | and update xmit accordingly */ |
| 1599 | |
| 1600 | /* if the stop bit was not set, all data has been sent */ |
| 1601 | if (!(descr->status & d_stop)) { |
| 1602 | sentl = descr->sw_len; |
| 1603 | } else |
| 1604 | /* otherwise we find the amount of data sent here */ |
| 1605 | sentl = descr->hw_len; |
| 1606 | |
| 1607 | DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); |
| 1608 | |
| 1609 | /* update stats */ |
| 1610 | info->icount.tx += sentl; |
| 1611 | |
| 1612 | /* update xmit buffer */ |
| 1613 | info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); |
| 1614 | |
| 1615 | /* if there is only a few chars left in the buf, wake up the blocked |
| 1616 | write if any */ |
| 1617 | if (CIRC_CNT(info->xmit.head, |
| 1618 | info->xmit.tail, |
| 1619 | SERIAL_XMIT_SIZE) < WAKEUP_CHARS) |
| 1620 | rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); |
| 1621 | |
| 1622 | /* find out the largest amount of consecutive bytes we want to send now */ |
| 1623 | |
| 1624 | c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); |
| 1625 | |
| 1626 | /* Don't send all in one DMA transfer - divide it so we wake up |
| 1627 | * application before all is sent |
| 1628 | */ |
| 1629 | |
| 1630 | if (c >= 4*WAKEUP_CHARS) |
| 1631 | c = c/2; |
| 1632 | |
| 1633 | if (c <= 0) { |
| 1634 | /* our job here is done, don't schedule any new DMA transfer */ |
| 1635 | info->tr_running = 0; |
| 1636 | |
| 1637 | #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 1638 | if (info->rs485.flags & SER_RS485_ENABLED) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1639 | /* Set a short timer to toggle RTS */ |
| 1640 | start_one_shot_timer(&fast_timers_rs485[info->line], |
| 1641 | rs485_toggle_rts_timer_function, |
| 1642 | (unsigned long)info, |
| 1643 | info->char_time_usec*2, |
| 1644 | "RS-485"); |
| 1645 | } |
| 1646 | #endif /* RS485 */ |
| 1647 | return; |
| 1648 | } |
| 1649 | |
| 1650 | /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ |
| 1651 | /* set up the descriptor correctly for output */ |
| 1652 | DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); |
| 1653 | descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ |
| 1654 | descr->sw_len = c; |
| 1655 | descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); |
| 1656 | descr->status = 0; |
| 1657 | |
| 1658 | *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ |
| 1659 | *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); |
| 1660 | |
| 1661 | /* DMA is now running (hopefully) */ |
| 1662 | } /* transmit_chars_dma */ |
| 1663 | |
| 1664 | static void |
| 1665 | start_transmit(struct e100_serial *info) |
| 1666 | { |
| 1667 | #if 0 |
| 1668 | if (info->line == SERIAL_DEBUG_LINE) |
| 1669 | printk("x\n"); |
| 1670 | #endif |
| 1671 | |
| 1672 | info->tr_descr.sw_len = 0; |
| 1673 | info->tr_descr.hw_len = 0; |
| 1674 | info->tr_descr.status = 0; |
| 1675 | info->tr_running = 1; |
| 1676 | if (info->uses_dma_out) |
| 1677 | transmit_chars_dma(info); |
| 1678 | else |
| 1679 | e100_enable_serial_tx_ready_irq(info); |
| 1680 | } /* start_transmit */ |
| 1681 | |
| 1682 | #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER |
| 1683 | static int serial_fast_timer_started = 0; |
| 1684 | static int serial_fast_timer_expired = 0; |
| 1685 | static void flush_timeout_function(unsigned long data); |
| 1686 | #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ |
| 1687 | unsigned long timer_flags; \ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1688 | local_irq_save(timer_flags); \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1689 | if (fast_timers[info->line].function == NULL) { \ |
| 1690 | serial_fast_timer_started++; \ |
| 1691 | TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ |
| 1692 | TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ |
| 1693 | start_one_shot_timer(&fast_timers[info->line], \ |
| 1694 | flush_timeout_function, \ |
| 1695 | (unsigned long)info, \ |
| 1696 | (usec), \ |
| 1697 | string); \ |
| 1698 | } \ |
| 1699 | else { \ |
| 1700 | TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ |
| 1701 | } \ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1702 | local_irq_restore(timer_flags); \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1703 | } |
| 1704 | #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) |
| 1705 | |
| 1706 | #else |
| 1707 | #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) |
| 1708 | #define START_FLUSH_FAST_TIMER(info, string) |
| 1709 | #endif |
| 1710 | |
| 1711 | static struct etrax_recv_buffer * |
| 1712 | alloc_recv_buffer(unsigned int size) |
| 1713 | { |
| 1714 | struct etrax_recv_buffer *buffer; |
| 1715 | |
| 1716 | if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) |
| 1717 | return NULL; |
| 1718 | |
| 1719 | buffer->next = NULL; |
| 1720 | buffer->length = 0; |
| 1721 | buffer->error = TTY_NORMAL; |
| 1722 | |
| 1723 | return buffer; |
| 1724 | } |
| 1725 | |
| 1726 | static void |
| 1727 | append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) |
| 1728 | { |
| 1729 | unsigned long flags; |
| 1730 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1731 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1732 | |
| 1733 | if (!info->first_recv_buffer) |
| 1734 | info->first_recv_buffer = buffer; |
| 1735 | else |
| 1736 | info->last_recv_buffer->next = buffer; |
| 1737 | |
| 1738 | info->last_recv_buffer = buffer; |
| 1739 | |
| 1740 | info->recv_cnt += buffer->length; |
| 1741 | if (info->recv_cnt > info->max_recv_cnt) |
| 1742 | info->max_recv_cnt = info->recv_cnt; |
| 1743 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1744 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1745 | } |
| 1746 | |
| 1747 | static int |
| 1748 | add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) |
| 1749 | { |
| 1750 | struct etrax_recv_buffer *buffer; |
| 1751 | if (info->uses_dma_in) { |
| 1752 | if (!(buffer = alloc_recv_buffer(4))) |
| 1753 | return 0; |
| 1754 | |
| 1755 | buffer->length = 1; |
| 1756 | buffer->error = flag; |
| 1757 | buffer->buffer[0] = data; |
| 1758 | |
| 1759 | append_recv_buffer(info, buffer); |
| 1760 | |
| 1761 | info->icount.rx++; |
| 1762 | } else { |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 1763 | struct tty_struct *tty = info->port.tty; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 1764 | tty_insert_flip_char(tty, data, flag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1765 | info->icount.rx++; |
| 1766 | } |
| 1767 | |
| 1768 | return 1; |
| 1769 | } |
| 1770 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1771 | static unsigned int handle_descr_data(struct e100_serial *info, |
| 1772 | struct etrax_dma_descr *descr, |
| 1773 | unsigned int recvl) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1774 | { |
| 1775 | struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; |
| 1776 | |
| 1777 | if (info->recv_cnt + recvl > 65536) { |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 1778 | printk(KERN_WARNING |
Harvey Harrison | 71cc2c2 | 2008-04-30 00:55:10 -0700 | [diff] [blame] | 1779 | "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1780 | return 0; |
| 1781 | } |
| 1782 | |
| 1783 | buffer->length = recvl; |
| 1784 | |
| 1785 | if (info->errorcode == ERRCODE_SET_BREAK) |
| 1786 | buffer->error = TTY_BREAK; |
| 1787 | info->errorcode = 0; |
| 1788 | |
| 1789 | append_recv_buffer(info, buffer); |
| 1790 | |
| 1791 | if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) |
Harvey Harrison | 71cc2c2 | 2008-04-30 00:55:10 -0700 | [diff] [blame] | 1792 | panic("%s: Failed to allocate memory for receive buffer!\n", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1793 | |
| 1794 | descr->buf = virt_to_phys(buffer->buffer); |
| 1795 | |
| 1796 | return recvl; |
| 1797 | } |
| 1798 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1799 | static unsigned int handle_all_descr_data(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1800 | { |
| 1801 | struct etrax_dma_descr *descr; |
| 1802 | unsigned int recvl; |
| 1803 | unsigned int ret = 0; |
| 1804 | |
| 1805 | while (1) |
| 1806 | { |
| 1807 | descr = &info->rec_descr[info->cur_rec_descr]; |
| 1808 | |
| 1809 | if (descr == phys_to_virt(*info->idescradr)) |
| 1810 | break; |
| 1811 | |
| 1812 | if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) |
| 1813 | info->cur_rec_descr = 0; |
| 1814 | |
| 1815 | /* find out how many bytes were read */ |
| 1816 | |
| 1817 | /* if the eop bit was not set, all data has been received */ |
| 1818 | if (!(descr->status & d_eop)) { |
| 1819 | recvl = descr->sw_len; |
| 1820 | } else { |
| 1821 | /* otherwise we find the amount of data received here */ |
| 1822 | recvl = descr->hw_len; |
| 1823 | } |
| 1824 | |
| 1825 | /* Reset the status information */ |
| 1826 | descr->status = 0; |
| 1827 | |
| 1828 | DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 1829 | if (info->port.tty->stopped) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1830 | unsigned char *buf = phys_to_virt(descr->buf); |
| 1831 | DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); |
| 1832 | DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); |
| 1833 | DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); |
| 1834 | } |
| 1835 | ); |
| 1836 | |
| 1837 | /* update stats */ |
| 1838 | info->icount.rx += recvl; |
| 1839 | |
| 1840 | ret += handle_descr_data(info, descr, recvl); |
| 1841 | } |
| 1842 | |
| 1843 | return ret; |
| 1844 | } |
| 1845 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1846 | static void receive_chars_dma(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1847 | { |
| 1848 | struct tty_struct *tty; |
| 1849 | unsigned char rstat; |
| 1850 | |
| 1851 | #ifdef CONFIG_SVINTO_SIM |
| 1852 | /* No receive in the simulator. Will probably be when the rest of |
| 1853 | * the serial interface works, and this piece will just be removed. |
| 1854 | */ |
| 1855 | return; |
| 1856 | #endif |
| 1857 | |
| 1858 | /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ |
| 1859 | *info->iclrintradr = |
| 1860 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | |
| 1861 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); |
| 1862 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 1863 | tty = info->port.tty; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1864 | if (!tty) /* Something wrong... */ |
| 1865 | return; |
| 1866 | |
| 1867 | #ifdef SERIAL_HANDLE_EARLY_ERRORS |
| 1868 | if (info->uses_dma_in) |
| 1869 | e100_enable_serial_data_irq(info); |
| 1870 | #endif |
| 1871 | |
| 1872 | if (info->errorcode == ERRCODE_INSERT_BREAK) |
| 1873 | add_char_and_flag(info, '\0', TTY_BREAK); |
| 1874 | |
| 1875 | handle_all_descr_data(info); |
| 1876 | |
| 1877 | /* Read the status register to detect errors */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1878 | rstat = info->ioport[REG_STATUS]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1879 | if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { |
| 1880 | DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); |
| 1881 | } |
| 1882 | |
| 1883 | if (rstat & SER_ERROR_MASK) { |
| 1884 | /* If we got an error, we must reset it by reading the |
| 1885 | * data_in field |
| 1886 | */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 1887 | unsigned char data = info->ioport[REG_DATA]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1888 | |
| 1889 | PROCSTAT(ser_stat[info->line].errors_cnt++); |
| 1890 | DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", |
| 1891 | ((rstat & SER_ERROR_MASK) << 8) | data); |
| 1892 | |
| 1893 | if (rstat & SER_PAR_ERR_MASK) |
| 1894 | add_char_and_flag(info, data, TTY_PARITY); |
| 1895 | else if (rstat & SER_OVERRUN_MASK) |
| 1896 | add_char_and_flag(info, data, TTY_OVERRUN); |
| 1897 | else if (rstat & SER_FRAMING_ERR_MASK) |
| 1898 | add_char_and_flag(info, data, TTY_FRAME); |
| 1899 | } |
| 1900 | |
| 1901 | START_FLUSH_FAST_TIMER(info, "receive_chars"); |
| 1902 | |
| 1903 | /* Restart the receiving DMA */ |
| 1904 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); |
| 1905 | } |
| 1906 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 1907 | static int start_recv_dma(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1908 | { |
| 1909 | struct etrax_dma_descr *descr = info->rec_descr; |
| 1910 | struct etrax_recv_buffer *buffer; |
| 1911 | int i; |
| 1912 | |
| 1913 | /* Set up the receiving descriptors */ |
| 1914 | for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { |
| 1915 | if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) |
Harvey Harrison | 71cc2c2 | 2008-04-30 00:55:10 -0700 | [diff] [blame] | 1916 | panic("%s: Failed to allocate memory for receive buffer!\n", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1917 | |
| 1918 | descr[i].ctrl = d_int; |
| 1919 | descr[i].buf = virt_to_phys(buffer->buffer); |
| 1920 | descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; |
| 1921 | descr[i].hw_len = 0; |
| 1922 | descr[i].status = 0; |
| 1923 | descr[i].next = virt_to_phys(&descr[i+1]); |
| 1924 | } |
| 1925 | |
| 1926 | /* Link the last descriptor to the first */ |
| 1927 | descr[i-1].next = virt_to_phys(&descr[0]); |
| 1928 | |
| 1929 | /* Start with the first descriptor in the list */ |
| 1930 | info->cur_rec_descr = 0; |
| 1931 | |
| 1932 | /* Start the DMA */ |
| 1933 | *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); |
| 1934 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); |
| 1935 | |
| 1936 | /* Input DMA should be running now */ |
| 1937 | return 1; |
| 1938 | } |
| 1939 | |
| 1940 | static void |
| 1941 | start_receive(struct e100_serial *info) |
| 1942 | { |
| 1943 | #ifdef CONFIG_SVINTO_SIM |
| 1944 | /* No receive in the simulator. Will probably be when the rest of |
| 1945 | * the serial interface works, and this piece will just be removed. |
| 1946 | */ |
| 1947 | return; |
| 1948 | #endif |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1949 | if (info->uses_dma_in) { |
| 1950 | /* reset the input dma channel to be sure it works */ |
| 1951 | |
| 1952 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); |
| 1953 | while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == |
| 1954 | IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); |
| 1955 | |
| 1956 | start_recv_dma(info); |
| 1957 | } |
| 1958 | } |
| 1959 | |
| 1960 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1961 | /* the bits in the MASK2 register are laid out like this: |
| 1962 | DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR |
| 1963 | where I is the input channel and O is the output channel for the port. |
| 1964 | info->irq is the bit number for the DMAO_DESCR so to check the others we |
| 1965 | shift info->irq to the left. |
| 1966 | */ |
| 1967 | |
| 1968 | /* dma output channel interrupt handler |
| 1969 | this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or |
| 1970 | DMA8(ser1) when they have finished a descriptor with the intr flag set. |
| 1971 | */ |
| 1972 | |
| 1973 | static irqreturn_t |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 1974 | tr_interrupt(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1975 | { |
| 1976 | struct e100_serial *info; |
| 1977 | unsigned long ireg; |
| 1978 | int i; |
| 1979 | int handled = 0; |
| 1980 | |
| 1981 | #ifdef CONFIG_SVINTO_SIM |
| 1982 | /* No receive in the simulator. Will probably be when the rest of |
| 1983 | * the serial interface works, and this piece will just be removed. |
| 1984 | */ |
| 1985 | { |
| 1986 | const char *s = "What? tr_interrupt in simulator??\n"; |
| 1987 | SIMCOUT(s,strlen(s)); |
| 1988 | } |
| 1989 | return IRQ_HANDLED; |
| 1990 | #endif |
| 1991 | |
| 1992 | /* find out the line that caused this irq and get it from rs_table */ |
| 1993 | |
| 1994 | ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ |
| 1995 | |
| 1996 | for (i = 0; i < NR_PORTS; i++) { |
| 1997 | info = rs_table + i; |
| 1998 | if (!info->enabled || !info->uses_dma_out) |
| 1999 | continue; |
| 2000 | /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ |
| 2001 | if (ireg & info->irq) { |
| 2002 | handled = 1; |
| 2003 | /* we can send a new dma bunch. make it so. */ |
| 2004 | DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); |
| 2005 | /* Read jiffies_usec first, |
| 2006 | * we want this time to be as late as possible |
| 2007 | */ |
| 2008 | PROCSTAT(ser_stat[info->line].tx_dma_ints++); |
| 2009 | info->last_tx_active_usec = GET_JIFFIES_USEC(); |
| 2010 | info->last_tx_active = jiffies; |
| 2011 | transmit_chars_dma(info); |
| 2012 | } |
| 2013 | |
| 2014 | /* FIXME: here we should really check for a change in the |
| 2015 | status lines and if so call status_handle(info) */ |
| 2016 | } |
| 2017 | return IRQ_RETVAL(handled); |
| 2018 | } /* tr_interrupt */ |
| 2019 | |
| 2020 | /* dma input channel interrupt handler */ |
| 2021 | |
| 2022 | static irqreturn_t |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 2023 | rec_interrupt(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2024 | { |
| 2025 | struct e100_serial *info; |
| 2026 | unsigned long ireg; |
| 2027 | int i; |
| 2028 | int handled = 0; |
| 2029 | |
| 2030 | #ifdef CONFIG_SVINTO_SIM |
| 2031 | /* No receive in the simulator. Will probably be when the rest of |
| 2032 | * the serial interface works, and this piece will just be removed. |
| 2033 | */ |
| 2034 | { |
| 2035 | const char *s = "What? rec_interrupt in simulator??\n"; |
| 2036 | SIMCOUT(s,strlen(s)); |
| 2037 | } |
| 2038 | return IRQ_HANDLED; |
| 2039 | #endif |
| 2040 | |
| 2041 | /* find out the line that caused this irq and get it from rs_table */ |
| 2042 | |
| 2043 | ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ |
| 2044 | |
| 2045 | for (i = 0; i < NR_PORTS; i++) { |
| 2046 | info = rs_table + i; |
| 2047 | if (!info->enabled || !info->uses_dma_in) |
| 2048 | continue; |
| 2049 | /* check for both dma_eop and dma_descr for the input dma channel */ |
| 2050 | if (ireg & ((info->irq << 2) | (info->irq << 3))) { |
| 2051 | handled = 1; |
| 2052 | /* we have received something */ |
| 2053 | receive_chars_dma(info); |
| 2054 | } |
| 2055 | |
| 2056 | /* FIXME: here we should really check for a change in the |
| 2057 | status lines and if so call status_handle(info) */ |
| 2058 | } |
| 2059 | return IRQ_RETVAL(handled); |
| 2060 | } /* rec_interrupt */ |
| 2061 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2062 | static int force_eop_if_needed(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2063 | { |
| 2064 | /* We check data_avail bit to determine if data has |
| 2065 | * arrived since last time |
| 2066 | */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2067 | unsigned char rstat = info->ioport[REG_STATUS]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2068 | |
| 2069 | /* error or datavail? */ |
| 2070 | if (rstat & SER_ERROR_MASK) { |
| 2071 | /* Some error has occurred. If there has been valid data, an |
| 2072 | * EOP interrupt will be made automatically. If no data, the |
| 2073 | * normal ser_interrupt should be enabled and handle it. |
| 2074 | * So do nothing! |
| 2075 | */ |
| 2076 | DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", |
| 2077 | rstat | (info->line << 8)); |
| 2078 | return 0; |
| 2079 | } |
| 2080 | |
| 2081 | if (rstat & SER_DATA_AVAIL_MASK) { |
| 2082 | /* Ok data, no error, count it */ |
| 2083 | TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", |
| 2084 | rstat | (info->line << 8))); |
| 2085 | /* Read data to clear status flags */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2086 | (void)info->ioport[REG_DATA]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2087 | |
| 2088 | info->forced_eop = 0; |
| 2089 | START_FLUSH_FAST_TIMER(info, "magic"); |
| 2090 | return 0; |
| 2091 | } |
| 2092 | |
| 2093 | /* hit the timeout, force an EOP for the input |
| 2094 | * dma channel if we haven't already |
| 2095 | */ |
| 2096 | if (!info->forced_eop) { |
| 2097 | info->forced_eop = 1; |
| 2098 | PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); |
| 2099 | TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); |
| 2100 | FORCE_EOP(info); |
| 2101 | } |
| 2102 | |
| 2103 | return 1; |
| 2104 | } |
| 2105 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2106 | static void flush_to_flip_buffer(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2107 | { |
| 2108 | struct tty_struct *tty; |
| 2109 | struct etrax_recv_buffer *buffer; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2110 | unsigned long flags; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2111 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2112 | local_irq_save(flags); |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2113 | tty = info->port.tty; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2114 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2115 | if (!tty) { |
| 2116 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2117 | return; |
| 2118 | } |
| 2119 | |
Alan Cox | 2090ab0 | 2007-10-16 01:26:38 -0700 | [diff] [blame] | 2120 | while ((buffer = info->first_recv_buffer) != NULL) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2121 | unsigned int count = buffer->length; |
| 2122 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2123 | tty_insert_flip_string(tty, buffer->buffer, count); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2124 | info->recv_cnt -= count; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2125 | |
| 2126 | if (count == buffer->length) { |
| 2127 | info->first_recv_buffer = buffer->next; |
| 2128 | kfree(buffer); |
| 2129 | } else { |
| 2130 | buffer->length -= count; |
| 2131 | memmove(buffer->buffer, buffer->buffer + count, buffer->length); |
| 2132 | buffer->error = TTY_NORMAL; |
| 2133 | } |
| 2134 | } |
| 2135 | |
| 2136 | if (!info->first_recv_buffer) |
| 2137 | info->last_recv_buffer = NULL; |
| 2138 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2139 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2140 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2141 | /* This includes a check for low-latency */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2142 | tty_flip_buffer_push(tty); |
| 2143 | } |
| 2144 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2145 | static void check_flush_timeout(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2146 | { |
| 2147 | /* Flip what we've got (if we can) */ |
| 2148 | flush_to_flip_buffer(info); |
| 2149 | |
| 2150 | /* We might need to flip later, but not to fast |
| 2151 | * since the system is busy processing input... */ |
| 2152 | if (info->first_recv_buffer) |
| 2153 | START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); |
| 2154 | |
| 2155 | /* Force eop last, since data might have come while we're processing |
| 2156 | * and if we started the slow timer above, we won't start a fast |
| 2157 | * below. |
| 2158 | */ |
| 2159 | force_eop_if_needed(info); |
| 2160 | } |
| 2161 | |
| 2162 | #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER |
| 2163 | static void flush_timeout_function(unsigned long data) |
| 2164 | { |
| 2165 | struct e100_serial *info = (struct e100_serial *)data; |
| 2166 | |
| 2167 | fast_timers[info->line].function = NULL; |
| 2168 | serial_fast_timer_expired++; |
| 2169 | TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); |
| 2170 | TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); |
| 2171 | check_flush_timeout(info); |
| 2172 | } |
| 2173 | |
| 2174 | #else |
| 2175 | |
| 2176 | /* dma fifo/buffer timeout handler |
| 2177 | forces an end-of-packet for the dma input channel if no chars |
| 2178 | have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. |
| 2179 | */ |
| 2180 | |
| 2181 | static struct timer_list flush_timer; |
| 2182 | |
| 2183 | static void |
| 2184 | timed_flush_handler(unsigned long ptr) |
| 2185 | { |
| 2186 | struct e100_serial *info; |
| 2187 | int i; |
| 2188 | |
| 2189 | #ifdef CONFIG_SVINTO_SIM |
| 2190 | return; |
| 2191 | #endif |
| 2192 | |
| 2193 | for (i = 0; i < NR_PORTS; i++) { |
| 2194 | info = rs_table + i; |
| 2195 | if (info->uses_dma_in) |
| 2196 | check_flush_timeout(info); |
| 2197 | } |
| 2198 | |
| 2199 | /* restart flush timer */ |
| 2200 | mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); |
| 2201 | } |
| 2202 | #endif |
| 2203 | |
| 2204 | #ifdef SERIAL_HANDLE_EARLY_ERRORS |
| 2205 | |
| 2206 | /* If there is an error (ie break) when the DMA is running and |
| 2207 | * there are no bytes in the fifo the DMA is stopped and we get no |
| 2208 | * eop interrupt. Thus we have to monitor the first bytes on a DMA |
| 2209 | * transfer, and if it is without error we can turn the serial |
| 2210 | * interrupts off. |
| 2211 | */ |
| 2212 | |
| 2213 | /* |
| 2214 | BREAK handling on ETRAX 100: |
| 2215 | ETRAX will generate interrupt although there is no stop bit between the |
| 2216 | characters. |
| 2217 | |
| 2218 | Depending on how long the break sequence is, the end of the breaksequence |
| 2219 | will look differently: |
| 2220 | | indicates start/end of a character. |
| 2221 | |
| 2222 | B= Break character (0x00) with framing error. |
| 2223 | E= Error byte with parity error received after B characters. |
| 2224 | F= "Faked" valid byte received immediately after B characters. |
| 2225 | V= Valid byte |
| 2226 | |
| 2227 | 1. |
| 2228 | B BL ___________________________ V |
| 2229 | .._|__________|__________| |valid data | |
| 2230 | |
| 2231 | Multiple frame errors with data == 0x00 (B), |
| 2232 | the timing matches up "perfectly" so no extra ending char is detected. |
| 2233 | The RXD pin is 1 in the last interrupt, in that case |
| 2234 | we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really |
| 2235 | know if another byte will come and this really is case 2. below |
| 2236 | (e.g F=0xFF or 0xFE) |
| 2237 | If RXD pin is 0 we can expect another character (see 2. below). |
| 2238 | |
| 2239 | |
| 2240 | 2. |
| 2241 | |
| 2242 | B B E or F__________________..__ V |
| 2243 | .._|__________|__________|______ | |valid data |
| 2244 | "valid" or |
| 2245 | parity error |
| 2246 | |
| 2247 | Multiple frame errors with data == 0x00 (B), |
| 2248 | but the part of the break trigs is interpreted as a start bit (and possibly |
| 2249 | some 0 bits followed by a number of 1 bits and a stop bit). |
| 2250 | Depending on parity settings etc. this last character can be either |
| 2251 | a fake "valid" char (F) or have a parity error (E). |
| 2252 | |
| 2253 | If the character is valid it will be put in the buffer, |
| 2254 | we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt |
| 2255 | will set the flags so the tty will handle it, |
| 2256 | if it's an error byte it will not be put in the buffer |
| 2257 | and we set info->errorcode = ERRCODE_INSERT_BREAK. |
| 2258 | |
| 2259 | To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp |
| 2260 | of the last faulty char (B) and compares it with the current time: |
| 2261 | If the time elapsed time is less then 2*char_time_usec we will assume |
| 2262 | it's a faked F char and not a Valid char and set |
| 2263 | info->errorcode = ERRCODE_SET_BREAK. |
| 2264 | |
| 2265 | Flaws in the above solution: |
| 2266 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 2267 | We use the timer to distinguish a F character from a V character, |
| 2268 | if a V character is to close after the break we might make the wrong decision. |
| 2269 | |
| 2270 | TODO: The break will be delayed until an F or V character is received. |
| 2271 | |
| 2272 | */ |
| 2273 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2274 | static |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2275 | struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) |
| 2276 | { |
| 2277 | unsigned long data_read; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2278 | struct tty_struct *tty = info->port.tty; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2279 | |
| 2280 | if (!tty) { |
| 2281 | printk("!NO TTY!\n"); |
| 2282 | return info; |
| 2283 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2284 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2285 | /* Read data and status at the same time */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2286 | data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2287 | more_data: |
| 2288 | if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { |
| 2289 | DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); |
| 2290 | } |
| 2291 | DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); |
| 2292 | |
| 2293 | if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | |
| 2294 | IO_MASK(R_SERIAL0_READ, par_err) | |
| 2295 | IO_MASK(R_SERIAL0_READ, overrun) )) { |
| 2296 | /* An error */ |
| 2297 | info->last_rx_active_usec = GET_JIFFIES_USEC(); |
| 2298 | info->last_rx_active = jiffies; |
| 2299 | DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); |
| 2300 | DLOG_INT_TRIG( |
| 2301 | if (!log_int_trig1_pos) { |
| 2302 | log_int_trig1_pos = log_int_pos; |
| 2303 | log_int(rdpc(), 0, 0); |
| 2304 | } |
| 2305 | ); |
| 2306 | |
| 2307 | |
| 2308 | if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && |
| 2309 | (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { |
| 2310 | /* Most likely a break, but we get interrupts over and |
| 2311 | * over again. |
| 2312 | */ |
| 2313 | |
| 2314 | if (!info->break_detected_cnt) { |
| 2315 | DEBUG_LOG(info->line, "#BRK start\n", 0); |
| 2316 | } |
| 2317 | if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { |
| 2318 | /* The RX pin is high now, so the break |
| 2319 | * must be over, but.... |
| 2320 | * we can't really know if we will get another |
| 2321 | * last byte ending the break or not. |
| 2322 | * And we don't know if the byte (if any) will |
| 2323 | * have an error or look valid. |
| 2324 | */ |
| 2325 | DEBUG_LOG(info->line, "# BL BRK\n", 0); |
| 2326 | info->errorcode = ERRCODE_INSERT_BREAK; |
| 2327 | } |
| 2328 | info->break_detected_cnt++; |
| 2329 | } else { |
| 2330 | /* The error does not look like a break, but could be |
| 2331 | * the end of one |
| 2332 | */ |
| 2333 | if (info->break_detected_cnt) { |
| 2334 | DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); |
| 2335 | info->errorcode = ERRCODE_INSERT_BREAK; |
| 2336 | } else { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2337 | unsigned char data = IO_EXTRACT(R_SERIAL0_READ, |
| 2338 | data_in, data_read); |
| 2339 | char flag = TTY_NORMAL; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2340 | if (info->errorcode == ERRCODE_INSERT_BREAK) { |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2341 | struct tty_struct *tty = info->port.tty; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2342 | tty_insert_flip_char(tty, 0, flag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2343 | info->icount.rx++; |
| 2344 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2345 | |
| 2346 | if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { |
| 2347 | info->icount.parity++; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2348 | flag = TTY_PARITY; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2349 | } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { |
| 2350 | info->icount.overrun++; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2351 | flag = TTY_OVERRUN; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2352 | } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { |
| 2353 | info->icount.frame++; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2354 | flag = TTY_FRAME; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2355 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2356 | tty_insert_flip_char(tty, data, flag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2357 | info->errorcode = 0; |
| 2358 | } |
| 2359 | info->break_detected_cnt = 0; |
| 2360 | } |
| 2361 | } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { |
| 2362 | /* No error */ |
| 2363 | DLOG_INT_TRIG( |
| 2364 | if (!log_int_trig1_pos) { |
| 2365 | if (log_int_pos >= log_int_size) { |
| 2366 | log_int_pos = 0; |
| 2367 | } |
| 2368 | log_int_trig0_pos = log_int_pos; |
| 2369 | log_int(rdpc(), 0, 0); |
| 2370 | } |
| 2371 | ); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2372 | tty_insert_flip_char(tty, |
| 2373 | IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), |
| 2374 | TTY_NORMAL); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2375 | } else { |
| 2376 | DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); |
| 2377 | } |
| 2378 | |
| 2379 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2380 | info->icount.rx++; |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2381 | data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2382 | if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { |
| 2383 | DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); |
| 2384 | goto more_data; |
| 2385 | } |
| 2386 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2387 | tty_flip_buffer_push(info->port.tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2388 | return info; |
| 2389 | } |
| 2390 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2391 | static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2392 | { |
| 2393 | unsigned char rstat; |
| 2394 | |
| 2395 | #ifdef SERIAL_DEBUG_INTR |
| 2396 | printk("Interrupt from serport %d\n", i); |
| 2397 | #endif |
| 2398 | /* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ |
| 2399 | if (!info->uses_dma_in) { |
| 2400 | return handle_ser_rx_interrupt_no_dma(info); |
| 2401 | } |
| 2402 | /* DMA is used */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2403 | rstat = info->ioport[REG_STATUS]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2404 | if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { |
| 2405 | DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); |
| 2406 | } |
| 2407 | |
| 2408 | if (rstat & SER_ERROR_MASK) { |
| 2409 | unsigned char data; |
| 2410 | |
| 2411 | info->last_rx_active_usec = GET_JIFFIES_USEC(); |
| 2412 | info->last_rx_active = jiffies; |
| 2413 | /* If we got an error, we must reset it by reading the |
| 2414 | * data_in field |
| 2415 | */ |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2416 | data = info->ioport[REG_DATA]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2417 | DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); |
| 2418 | DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); |
| 2419 | if (!data && (rstat & SER_FRAMING_ERR_MASK)) { |
| 2420 | /* Most likely a break, but we get interrupts over and |
| 2421 | * over again. |
| 2422 | */ |
| 2423 | |
| 2424 | if (!info->break_detected_cnt) { |
| 2425 | DEBUG_LOG(info->line, "#BRK start\n", 0); |
| 2426 | } |
| 2427 | if (rstat & SER_RXD_MASK) { |
| 2428 | /* The RX pin is high now, so the break |
| 2429 | * must be over, but.... |
| 2430 | * we can't really know if we will get another |
| 2431 | * last byte ending the break or not. |
| 2432 | * And we don't know if the byte (if any) will |
| 2433 | * have an error or look valid. |
| 2434 | */ |
| 2435 | DEBUG_LOG(info->line, "# BL BRK\n", 0); |
| 2436 | info->errorcode = ERRCODE_INSERT_BREAK; |
| 2437 | } |
| 2438 | info->break_detected_cnt++; |
| 2439 | } else { |
| 2440 | /* The error does not look like a break, but could be |
| 2441 | * the end of one |
| 2442 | */ |
| 2443 | if (info->break_detected_cnt) { |
| 2444 | DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); |
| 2445 | info->errorcode = ERRCODE_INSERT_BREAK; |
| 2446 | } else { |
| 2447 | if (info->errorcode == ERRCODE_INSERT_BREAK) { |
| 2448 | info->icount.brk++; |
| 2449 | add_char_and_flag(info, '\0', TTY_BREAK); |
| 2450 | } |
| 2451 | |
| 2452 | if (rstat & SER_PAR_ERR_MASK) { |
| 2453 | info->icount.parity++; |
| 2454 | add_char_and_flag(info, data, TTY_PARITY); |
| 2455 | } else if (rstat & SER_OVERRUN_MASK) { |
| 2456 | info->icount.overrun++; |
| 2457 | add_char_and_flag(info, data, TTY_OVERRUN); |
| 2458 | } else if (rstat & SER_FRAMING_ERR_MASK) { |
| 2459 | info->icount.frame++; |
| 2460 | add_char_and_flag(info, data, TTY_FRAME); |
| 2461 | } |
| 2462 | |
| 2463 | info->errorcode = 0; |
| 2464 | } |
| 2465 | info->break_detected_cnt = 0; |
| 2466 | DEBUG_LOG(info->line, "#iERR s d %04X\n", |
| 2467 | ((rstat & SER_ERROR_MASK) << 8) | data); |
| 2468 | } |
| 2469 | PROCSTAT(ser_stat[info->line].early_errors_cnt++); |
| 2470 | } else { /* It was a valid byte, now let the DMA do the rest */ |
| 2471 | unsigned long curr_time_u = GET_JIFFIES_USEC(); |
| 2472 | unsigned long curr_time = jiffies; |
| 2473 | |
| 2474 | if (info->break_detected_cnt) { |
| 2475 | /* Detect if this character is a new valid char or the |
| 2476 | * last char in a break sequence: If LSBits are 0 and |
| 2477 | * MSBits are high AND the time is close to the |
| 2478 | * previous interrupt we should discard it. |
| 2479 | */ |
| 2480 | long elapsed_usec = |
| 2481 | (curr_time - info->last_rx_active) * (1000000/HZ) + |
| 2482 | curr_time_u - info->last_rx_active_usec; |
| 2483 | if (elapsed_usec < 2*info->char_time_usec) { |
| 2484 | DEBUG_LOG(info->line, "FBRK %i\n", info->line); |
| 2485 | /* Report as BREAK (error) and let |
| 2486 | * receive_chars_dma() handle it |
| 2487 | */ |
| 2488 | info->errorcode = ERRCODE_SET_BREAK; |
| 2489 | } else { |
| 2490 | DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); |
| 2491 | } |
| 2492 | DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); |
| 2493 | } |
| 2494 | |
| 2495 | #ifdef SERIAL_DEBUG_INTR |
| 2496 | printk("** OK, disabling ser_interrupts\n"); |
| 2497 | #endif |
| 2498 | e100_disable_serial_data_irq(info); |
| 2499 | DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); |
| 2500 | info->break_detected_cnt = 0; |
| 2501 | |
| 2502 | PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); |
| 2503 | } |
| 2504 | /* Restarting the DMA never hurts */ |
| 2505 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); |
| 2506 | START_FLUSH_FAST_TIMER(info, "ser_int"); |
| 2507 | return info; |
| 2508 | } /* handle_ser_rx_interrupt */ |
| 2509 | |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 2510 | static void handle_ser_tx_interrupt(struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2511 | { |
| 2512 | unsigned long flags; |
| 2513 | |
| 2514 | if (info->x_char) { |
| 2515 | unsigned char rstat; |
| 2516 | DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2517 | local_irq_save(flags); |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2518 | rstat = info->ioport[REG_STATUS]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2519 | DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); |
| 2520 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2521 | info->ioport[REG_TR_DATA] = info->x_char; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2522 | info->icount.tx++; |
| 2523 | info->x_char = 0; |
| 2524 | /* We must enable since it is disabled in ser_interrupt */ |
| 2525 | e100_enable_serial_tx_ready_irq(info); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2526 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2527 | return; |
| 2528 | } |
| 2529 | if (info->uses_dma_out) { |
| 2530 | unsigned char rstat; |
| 2531 | int i; |
| 2532 | /* We only use normal tx interrupt when sending x_char */ |
| 2533 | DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2534 | local_irq_save(flags); |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2535 | rstat = info->ioport[REG_STATUS]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2536 | DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); |
| 2537 | e100_disable_serial_tx_ready_irq(info); |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2538 | if (info->port.tty->stopped) |
| 2539 | rs_stop(info->port.tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2540 | /* Enable the DMA channel and tell it to continue */ |
| 2541 | e100_enable_txdma_channel(info); |
| 2542 | /* Wait 12 cycles before doing the DMA command */ |
| 2543 | for(i = 6; i > 0; i--) |
| 2544 | nop(); |
| 2545 | |
| 2546 | *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2547 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2548 | return; |
| 2549 | } |
| 2550 | /* Normal char-by-char interrupt */ |
| 2551 | if (info->xmit.head == info->xmit.tail |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2552 | || info->port.tty->stopped |
| 2553 | || info->port.tty->hw_stopped) { |
| 2554 | DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", |
| 2555 | info->port.tty->stopped)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2556 | e100_disable_serial_tx_ready_irq(info); |
| 2557 | info->tr_running = 0; |
| 2558 | return; |
| 2559 | } |
| 2560 | DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); |
| 2561 | /* Send a byte, rs485 timing is critical so turn of ints */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2562 | local_irq_save(flags); |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2563 | info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2564 | info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); |
| 2565 | info->icount.tx++; |
| 2566 | if (info->xmit.head == info->xmit.tail) { |
| 2567 | #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 2568 | if (info->rs485.flags & SER_RS485_ENABLED) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2569 | /* Set a short timer to toggle RTS */ |
| 2570 | start_one_shot_timer(&fast_timers_rs485[info->line], |
| 2571 | rs485_toggle_rts_timer_function, |
| 2572 | (unsigned long)info, |
| 2573 | info->char_time_usec*2, |
| 2574 | "RS-485"); |
| 2575 | } |
| 2576 | #endif /* RS485 */ |
| 2577 | info->last_tx_active_usec = GET_JIFFIES_USEC(); |
| 2578 | info->last_tx_active = jiffies; |
| 2579 | e100_disable_serial_tx_ready_irq(info); |
| 2580 | info->tr_running = 0; |
| 2581 | DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); |
| 2582 | } else { |
| 2583 | /* We must enable since it is disabled in ser_interrupt */ |
| 2584 | e100_enable_serial_tx_ready_irq(info); |
| 2585 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2586 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2587 | |
| 2588 | if (CIRC_CNT(info->xmit.head, |
| 2589 | info->xmit.tail, |
| 2590 | SERIAL_XMIT_SIZE) < WAKEUP_CHARS) |
| 2591 | rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); |
| 2592 | |
| 2593 | } /* handle_ser_tx_interrupt */ |
| 2594 | |
| 2595 | /* result of time measurements: |
| 2596 | * RX duration 54-60 us when doing something, otherwise 6-9 us |
| 2597 | * ser_int duration: just sending: 8-15 us normally, up to 73 us |
| 2598 | */ |
| 2599 | static irqreturn_t |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 2600 | ser_interrupt(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2601 | { |
| 2602 | static volatile int tx_started = 0; |
| 2603 | struct e100_serial *info; |
| 2604 | int i; |
| 2605 | unsigned long flags; |
| 2606 | unsigned long irq_mask1_rd; |
| 2607 | unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ |
| 2608 | int handled = 0; |
| 2609 | static volatile unsigned long reentered_ready_mask = 0; |
| 2610 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2611 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2612 | irq_mask1_rd = *R_IRQ_MASK1_RD; |
| 2613 | /* First handle all rx interrupts with ints disabled */ |
| 2614 | info = rs_table; |
| 2615 | irq_mask1_rd &= e100_ser_int_mask; |
| 2616 | for (i = 0; i < NR_PORTS; i++) { |
| 2617 | /* Which line caused the data irq? */ |
| 2618 | if (irq_mask1_rd & data_mask) { |
| 2619 | handled = 1; |
| 2620 | handle_ser_rx_interrupt(info); |
| 2621 | } |
| 2622 | info += 1; |
| 2623 | data_mask <<= 2; |
| 2624 | } |
| 2625 | /* Handle tx interrupts with interrupts enabled so we |
| 2626 | * can take care of new data interrupts while transmitting |
| 2627 | * We protect the tx part with the tx_started flag. |
| 2628 | * We disable the tr_ready interrupts we are about to handle and |
| 2629 | * unblock the serial interrupt so new serial interrupts may come. |
| 2630 | * |
| 2631 | * If we get a new interrupt: |
| 2632 | * - it migth be due to synchronous serial ports. |
| 2633 | * - serial irq will be blocked by general irq handler. |
| 2634 | * - async data will be handled above (sync will be ignored). |
| 2635 | * - tx_started flag will prevent us from trying to send again and |
| 2636 | * we will exit fast - no need to unblock serial irq. |
| 2637 | * - Next (sync) serial interrupt handler will be runned with |
| 2638 | * disabled interrupt due to restore_flags() at end of function, |
| 2639 | * so sync handler will not be preempted or reentered. |
| 2640 | */ |
| 2641 | if (!tx_started) { |
| 2642 | unsigned long ready_mask; |
| 2643 | unsigned long |
| 2644 | tx_started = 1; |
| 2645 | /* Only the tr_ready interrupts left */ |
| 2646 | irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | |
| 2647 | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | |
| 2648 | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | |
| 2649 | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); |
| 2650 | while (irq_mask1_rd) { |
| 2651 | /* Disable those we are about to handle */ |
| 2652 | *R_IRQ_MASK1_CLR = irq_mask1_rd; |
| 2653 | /* Unblock the serial interrupt */ |
| 2654 | *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); |
| 2655 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2656 | local_irq_enable(); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2657 | ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ |
| 2658 | info = rs_table; |
| 2659 | for (i = 0; i < NR_PORTS; i++) { |
| 2660 | /* Which line caused the ready irq? */ |
| 2661 | if (irq_mask1_rd & ready_mask) { |
| 2662 | handled = 1; |
| 2663 | handle_ser_tx_interrupt(info); |
| 2664 | } |
| 2665 | info += 1; |
| 2666 | ready_mask <<= 2; |
| 2667 | } |
| 2668 | /* handle_ser_tx_interrupt enables tr_ready interrupts */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2669 | local_irq_disable(); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2670 | /* Handle reentered TX interrupt */ |
| 2671 | irq_mask1_rd = reentered_ready_mask; |
| 2672 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2673 | local_irq_disable(); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2674 | tx_started = 0; |
| 2675 | } else { |
| 2676 | unsigned long ready_mask; |
| 2677 | ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | |
| 2678 | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | |
| 2679 | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | |
| 2680 | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); |
| 2681 | if (ready_mask) { |
| 2682 | reentered_ready_mask |= ready_mask; |
| 2683 | /* Disable those we are about to handle */ |
| 2684 | *R_IRQ_MASK1_CLR = ready_mask; |
| 2685 | DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); |
| 2686 | } |
| 2687 | } |
| 2688 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2689 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2690 | return IRQ_RETVAL(handled); |
| 2691 | } /* ser_interrupt */ |
| 2692 | #endif |
| 2693 | |
| 2694 | /* |
| 2695 | * ------------------------------------------------------------------- |
| 2696 | * Here ends the serial interrupt routines. |
| 2697 | * ------------------------------------------------------------------- |
| 2698 | */ |
| 2699 | |
| 2700 | /* |
| 2701 | * This routine is used to handle the "bottom half" processing for the |
| 2702 | * serial driver, known also the "software interrupt" processing. |
| 2703 | * This processing is done at the kernel interrupt level, after the |
| 2704 | * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This |
| 2705 | * is where time-consuming activities which can not be done in the |
| 2706 | * interrupt driver proper are done; the interrupt driver schedules |
| 2707 | * them using rs_sched_event(), and they get done here. |
| 2708 | */ |
| 2709 | static void |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2710 | do_softint(struct work_struct *work) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2711 | { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2712 | struct e100_serial *info; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2713 | struct tty_struct *tty; |
| 2714 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2715 | info = container_of(work, struct e100_serial, work); |
| 2716 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2717 | tty = info->port.tty; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2718 | if (!tty) |
| 2719 | return; |
| 2720 | |
Jiri Slaby | b963a84 | 2007-02-10 01:44:55 -0800 | [diff] [blame] | 2721 | if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) |
| 2722 | tty_wakeup(tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2723 | } |
| 2724 | |
| 2725 | static int |
| 2726 | startup(struct e100_serial * info) |
| 2727 | { |
| 2728 | unsigned long flags; |
| 2729 | unsigned long xmit_page; |
| 2730 | int i; |
| 2731 | |
| 2732 | xmit_page = get_zeroed_page(GFP_KERNEL); |
| 2733 | if (!xmit_page) |
| 2734 | return -ENOMEM; |
| 2735 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2736 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2737 | |
| 2738 | /* if it was already initialized, skip this */ |
| 2739 | |
| 2740 | if (info->flags & ASYNC_INITIALIZED) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2741 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2742 | free_page(xmit_page); |
| 2743 | return 0; |
| 2744 | } |
| 2745 | |
| 2746 | if (info->xmit.buf) |
| 2747 | free_page(xmit_page); |
| 2748 | else |
| 2749 | info->xmit.buf = (unsigned char *) xmit_page; |
| 2750 | |
| 2751 | #ifdef SERIAL_DEBUG_OPEN |
| 2752 | printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); |
| 2753 | #endif |
| 2754 | |
| 2755 | #ifdef CONFIG_SVINTO_SIM |
| 2756 | /* Bits and pieces collected from below. Better to have them |
| 2757 | in one ifdef:ed clause than to mix in a lot of ifdefs, |
| 2758 | right? */ |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2759 | if (info->port.tty) |
| 2760 | clear_bit(TTY_IO_ERROR, &info->port.tty->flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2761 | |
| 2762 | info->xmit.head = info->xmit.tail = 0; |
| 2763 | info->first_recv_buffer = info->last_recv_buffer = NULL; |
| 2764 | info->recv_cnt = info->max_recv_cnt = 0; |
| 2765 | |
| 2766 | for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) |
| 2767 | info->rec_descr[i].buf = NULL; |
| 2768 | |
| 2769 | /* No real action in the simulator, but may set info important |
| 2770 | to ioctl. */ |
| 2771 | change_speed(info); |
| 2772 | #else |
| 2773 | |
| 2774 | /* |
| 2775 | * Clear the FIFO buffers and disable them |
| 2776 | * (they will be reenabled in change_speed()) |
| 2777 | */ |
| 2778 | |
| 2779 | /* |
| 2780 | * Reset the DMA channels and make sure their interrupts are cleared |
| 2781 | */ |
| 2782 | |
| 2783 | if (info->dma_in_enabled) { |
| 2784 | info->uses_dma_in = 1; |
| 2785 | e100_enable_rxdma_channel(info); |
| 2786 | |
| 2787 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); |
| 2788 | |
| 2789 | /* Wait until reset cycle is complete */ |
| 2790 | while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == |
| 2791 | IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); |
| 2792 | |
| 2793 | /* Make sure the irqs are cleared */ |
| 2794 | *info->iclrintradr = |
| 2795 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | |
| 2796 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); |
| 2797 | } else { |
| 2798 | e100_disable_rxdma_channel(info); |
| 2799 | } |
| 2800 | |
| 2801 | if (info->dma_out_enabled) { |
| 2802 | info->uses_dma_out = 1; |
| 2803 | e100_enable_txdma_channel(info); |
| 2804 | *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); |
| 2805 | |
| 2806 | while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == |
| 2807 | IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); |
| 2808 | |
| 2809 | /* Make sure the irqs are cleared */ |
| 2810 | *info->oclrintradr = |
| 2811 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | |
| 2812 | IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); |
| 2813 | } else { |
| 2814 | e100_disable_txdma_channel(info); |
| 2815 | } |
| 2816 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2817 | if (info->port.tty) |
| 2818 | clear_bit(TTY_IO_ERROR, &info->port.tty->flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2819 | |
| 2820 | info->xmit.head = info->xmit.tail = 0; |
| 2821 | info->first_recv_buffer = info->last_recv_buffer = NULL; |
| 2822 | info->recv_cnt = info->max_recv_cnt = 0; |
| 2823 | |
| 2824 | for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) |
| 2825 | info->rec_descr[i].buf = 0; |
| 2826 | |
| 2827 | /* |
| 2828 | * and set the speed and other flags of the serial port |
| 2829 | * this will start the rx/tx as well |
| 2830 | */ |
| 2831 | #ifdef SERIAL_HANDLE_EARLY_ERRORS |
| 2832 | e100_enable_serial_data_irq(info); |
| 2833 | #endif |
| 2834 | change_speed(info); |
| 2835 | |
| 2836 | /* dummy read to reset any serial errors */ |
| 2837 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2838 | (void)info->ioport[REG_DATA]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2839 | |
| 2840 | /* enable the interrupts */ |
| 2841 | if (info->uses_dma_out) |
| 2842 | e100_enable_txdma_irq(info); |
| 2843 | |
| 2844 | e100_enable_rx_irq(info); |
| 2845 | |
| 2846 | info->tr_running = 0; /* to be sure we don't lock up the transmitter */ |
| 2847 | |
| 2848 | /* setup the dma input descriptor and start dma */ |
| 2849 | |
| 2850 | start_receive(info); |
| 2851 | |
| 2852 | /* for safety, make sure the descriptors last result is 0 bytes written */ |
| 2853 | |
| 2854 | info->tr_descr.sw_len = 0; |
| 2855 | info->tr_descr.hw_len = 0; |
| 2856 | info->tr_descr.status = 0; |
| 2857 | |
| 2858 | /* enable RTS/DTR last */ |
| 2859 | |
| 2860 | e100_rts(info, 1); |
| 2861 | e100_dtr(info, 1); |
| 2862 | |
| 2863 | #endif /* CONFIG_SVINTO_SIM */ |
| 2864 | |
| 2865 | info->flags |= ASYNC_INITIALIZED; |
| 2866 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2867 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2868 | return 0; |
| 2869 | } |
| 2870 | |
| 2871 | /* |
| 2872 | * This routine will shutdown a serial port; interrupts are disabled, and |
| 2873 | * DTR is dropped if the hangup on close termio flag is on. |
| 2874 | */ |
| 2875 | static void |
| 2876 | shutdown(struct e100_serial * info) |
| 2877 | { |
| 2878 | unsigned long flags; |
| 2879 | struct etrax_dma_descr *descr = info->rec_descr; |
| 2880 | struct etrax_recv_buffer *buffer; |
| 2881 | int i; |
| 2882 | |
| 2883 | #ifndef CONFIG_SVINTO_SIM |
| 2884 | /* shut down the transmitter and receiver */ |
| 2885 | DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); |
| 2886 | e100_disable_rx(info); |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2887 | info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2888 | |
| 2889 | /* disable interrupts, reset dma channels */ |
| 2890 | if (info->uses_dma_in) { |
| 2891 | e100_disable_rxdma_irq(info); |
| 2892 | *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); |
| 2893 | info->uses_dma_in = 0; |
| 2894 | } else { |
| 2895 | e100_disable_serial_data_irq(info); |
| 2896 | } |
| 2897 | |
| 2898 | if (info->uses_dma_out) { |
| 2899 | e100_disable_txdma_irq(info); |
| 2900 | info->tr_running = 0; |
| 2901 | *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); |
| 2902 | info->uses_dma_out = 0; |
| 2903 | } else { |
| 2904 | e100_disable_serial_tx_ready_irq(info); |
| 2905 | info->tr_running = 0; |
| 2906 | } |
| 2907 | |
| 2908 | #endif /* CONFIG_SVINTO_SIM */ |
| 2909 | |
| 2910 | if (!(info->flags & ASYNC_INITIALIZED)) |
| 2911 | return; |
| 2912 | |
| 2913 | #ifdef SERIAL_DEBUG_OPEN |
| 2914 | printk("Shutting down serial port %d (irq %d)....\n", info->line, |
| 2915 | info->irq); |
| 2916 | #endif |
| 2917 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2918 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2919 | |
| 2920 | if (info->xmit.buf) { |
| 2921 | free_page((unsigned long)info->xmit.buf); |
| 2922 | info->xmit.buf = NULL; |
| 2923 | } |
| 2924 | |
| 2925 | for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) |
| 2926 | if (descr[i].buf) { |
| 2927 | buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; |
| 2928 | kfree(buffer); |
| 2929 | descr[i].buf = 0; |
| 2930 | } |
| 2931 | |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 2932 | if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2933 | /* hang up DTR and RTS if HUPCL is enabled */ |
| 2934 | e100_dtr(info, 0); |
| 2935 | e100_rts(info, 0); /* could check CRTSCTS before doing this */ |
| 2936 | } |
| 2937 | |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 2938 | if (info->port.tty) |
| 2939 | set_bit(TTY_IO_ERROR, &info->port.tty->flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2940 | |
| 2941 | info->flags &= ~ASYNC_INITIALIZED; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 2942 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2943 | } |
| 2944 | |
| 2945 | |
| 2946 | /* change baud rate and other assorted parameters */ |
| 2947 | |
| 2948 | static void |
| 2949 | change_speed(struct e100_serial *info) |
| 2950 | { |
| 2951 | unsigned int cflag; |
| 2952 | unsigned long xoff; |
| 2953 | unsigned long flags; |
| 2954 | /* first some safety checks */ |
| 2955 | |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 2956 | if (!info->port.tty) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2957 | return; |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 2958 | if (!info->ioport) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2959 | return; |
| 2960 | |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 2961 | cflag = info->port.tty->termios.c_cflag; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2962 | |
| 2963 | /* possibly, the tx/rx should be disabled first to do this safely */ |
| 2964 | |
| 2965 | /* change baud-rate and write it to the hardware */ |
| 2966 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { |
| 2967 | /* Special baudrate */ |
| 2968 | u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ |
| 2969 | unsigned long alt_source = |
| 2970 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | |
| 2971 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); |
| 2972 | /* R_ALT_SER_BAUDRATE selects the source */ |
| 2973 | DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", |
| 2974 | (unsigned long)info->baud_base, info->custom_divisor)); |
| 2975 | if (info->baud_base == SERIAL_PRESCALE_BASE) { |
| 2976 | /* 0, 2-65535 (0=65536) */ |
| 2977 | u16 divisor = info->custom_divisor; |
| 2978 | /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ |
| 2979 | /* baudrate is 3.125MHz/custom_divisor */ |
| 2980 | alt_source = |
| 2981 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | |
| 2982 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); |
| 2983 | alt_source = 0x11; |
| 2984 | DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); |
| 2985 | *R_SERIAL_PRESCALE = divisor; |
| 2986 | info->baud = SERIAL_PRESCALE_BASE/divisor; |
| 2987 | } |
| 2988 | #ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED |
| 2989 | else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && |
| 2990 | info->custom_divisor == 1) || |
| 2991 | (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && |
| 2992 | info->custom_divisor == 8)) { |
| 2993 | /* ext_clk selected */ |
| 2994 | alt_source = |
| 2995 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | |
| 2996 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); |
| 2997 | DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); |
| 2998 | info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; |
| 2999 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3000 | #endif |
| 3001 | else |
| 3002 | { |
| 3003 | /* Bad baudbase, we don't support using timer0 |
| 3004 | * for baudrate. |
| 3005 | */ |
| 3006 | printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", |
| 3007 | (unsigned long)info->baud_base, info->custom_divisor); |
| 3008 | } |
| 3009 | r_alt_ser_baudrate_shadow &= ~mask; |
| 3010 | r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); |
| 3011 | *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; |
| 3012 | } else { |
| 3013 | /* Normal baudrate */ |
| 3014 | /* Make sure we use normal baudrate */ |
| 3015 | u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ |
| 3016 | unsigned long alt_source = |
| 3017 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | |
| 3018 | IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); |
| 3019 | r_alt_ser_baudrate_shadow &= ~mask; |
| 3020 | r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); |
| 3021 | #ifndef CONFIG_SVINTO_SIM |
| 3022 | *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; |
| 3023 | #endif /* CONFIG_SVINTO_SIM */ |
| 3024 | |
| 3025 | info->baud = cflag_to_baud(cflag); |
| 3026 | #ifndef CONFIG_SVINTO_SIM |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3027 | info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3028 | #endif /* CONFIG_SVINTO_SIM */ |
| 3029 | } |
| 3030 | |
| 3031 | #ifndef CONFIG_SVINTO_SIM |
| 3032 | /* start with default settings and then fill in changes */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3033 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3034 | /* 8 bit, no/even parity */ |
| 3035 | info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | |
| 3036 | IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | |
| 3037 | IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); |
| 3038 | |
| 3039 | /* 8 bit, no/even parity, 1 stop bit, no cts */ |
| 3040 | info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | |
| 3041 | IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | |
| 3042 | IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | |
| 3043 | IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | |
| 3044 | IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); |
| 3045 | |
| 3046 | if ((cflag & CSIZE) == CS7) { |
| 3047 | /* set 7 bit mode */ |
| 3048 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); |
| 3049 | info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); |
| 3050 | } |
| 3051 | |
| 3052 | if (cflag & CSTOPB) { |
| 3053 | /* set 2 stop bit mode */ |
| 3054 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); |
| 3055 | } |
| 3056 | |
| 3057 | if (cflag & PARENB) { |
| 3058 | /* enable parity */ |
| 3059 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); |
| 3060 | info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); |
| 3061 | } |
| 3062 | |
| 3063 | if (cflag & CMSPAR) { |
| 3064 | /* enable stick parity, PARODD mean Mark which matches ETRAX */ |
| 3065 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); |
| 3066 | info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); |
| 3067 | } |
| 3068 | if (cflag & PARODD) { |
| 3069 | /* set odd parity (or Mark if CMSPAR) */ |
| 3070 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); |
| 3071 | info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); |
| 3072 | } |
| 3073 | |
| 3074 | if (cflag & CRTSCTS) { |
| 3075 | /* enable automatic CTS handling */ |
| 3076 | DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); |
| 3077 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); |
| 3078 | } |
| 3079 | |
| 3080 | /* make sure the tx and rx are enabled */ |
| 3081 | |
| 3082 | info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); |
| 3083 | info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); |
| 3084 | |
| 3085 | /* actually write the control regs to the hardware */ |
| 3086 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3087 | info->ioport[REG_TR_CTRL] = info->tx_ctrl; |
| 3088 | info->ioport[REG_REC_CTRL] = info->rx_ctrl; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 3089 | xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3090 | xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 3091 | if (info->port.tty->termios.c_iflag & IXON ) { |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 3092 | DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", |
| 3093 | STOP_CHAR(info->port.tty))); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3094 | xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); |
| 3095 | } |
| 3096 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3097 | *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3098 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3099 | #endif /* !CONFIG_SVINTO_SIM */ |
| 3100 | |
| 3101 | update_char_time(info); |
| 3102 | |
| 3103 | } /* change_speed */ |
| 3104 | |
| 3105 | /* start transmitting chars NOW */ |
| 3106 | |
| 3107 | static void |
| 3108 | rs_flush_chars(struct tty_struct *tty) |
| 3109 | { |
| 3110 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3111 | unsigned long flags; |
| 3112 | |
| 3113 | if (info->tr_running || |
| 3114 | info->xmit.head == info->xmit.tail || |
| 3115 | tty->stopped || |
| 3116 | tty->hw_stopped || |
| 3117 | !info->xmit.buf) |
| 3118 | return; |
| 3119 | |
| 3120 | #ifdef SERIAL_DEBUG_FLOW |
| 3121 | printk("rs_flush_chars\n"); |
| 3122 | #endif |
| 3123 | |
| 3124 | /* this protection might not exactly be necessary here */ |
| 3125 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3126 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3127 | start_transmit(info); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3128 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3129 | } |
| 3130 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3131 | static int rs_raw_write(struct tty_struct *tty, |
Adrian Bunk | 41c28ff | 2006-03-23 03:00:56 -0800 | [diff] [blame] | 3132 | const unsigned char *buf, int count) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3133 | { |
| 3134 | int c, ret = 0; |
| 3135 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3136 | unsigned long flags; |
| 3137 | |
| 3138 | /* first some sanity checks */ |
| 3139 | |
Jiri Slaby | 37f00f6 | 2012-04-02 13:53:45 +0200 | [diff] [blame] | 3140 | if (!tty || !info->xmit.buf) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3141 | return 0; |
| 3142 | |
| 3143 | #ifdef SERIAL_DEBUG_DATA |
| 3144 | if (info->line == SERIAL_DEBUG_LINE) |
| 3145 | printk("rs_raw_write (%d), status %d\n", |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3146 | count, info->ioport[REG_STATUS]); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3147 | #endif |
| 3148 | |
| 3149 | #ifdef CONFIG_SVINTO_SIM |
| 3150 | /* Really simple. The output is here and now. */ |
| 3151 | SIMCOUT(buf, count); |
| 3152 | return count; |
| 3153 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3154 | local_save_flags(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3155 | DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); |
| 3156 | DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); |
| 3157 | |
| 3158 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3159 | /* The local_irq_disable/restore_flags pairs below are needed |
| 3160 | * because the DMA interrupt handler moves the info->xmit values. |
| 3161 | * the memcpy needs to be in the critical region unfortunately, |
| 3162 | * because we need to read xmit values, memcpy, write xmit values |
| 3163 | * in one atomic operation... this could perhaps be avoided by |
| 3164 | * more clever design. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3165 | */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3166 | local_irq_disable(); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3167 | while (count) { |
| 3168 | c = CIRC_SPACE_TO_END(info->xmit.head, |
| 3169 | info->xmit.tail, |
| 3170 | SERIAL_XMIT_SIZE); |
| 3171 | |
| 3172 | if (count < c) |
| 3173 | c = count; |
| 3174 | if (c <= 0) |
| 3175 | break; |
| 3176 | |
| 3177 | memcpy(info->xmit.buf + info->xmit.head, buf, c); |
| 3178 | info->xmit.head = (info->xmit.head + c) & |
| 3179 | (SERIAL_XMIT_SIZE-1); |
| 3180 | buf += c; |
| 3181 | count -= c; |
| 3182 | ret += c; |
| 3183 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3184 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3185 | |
| 3186 | /* enable transmitter if not running, unless the tty is stopped |
| 3187 | * this does not need IRQ protection since if tr_running == 0 |
| 3188 | * the IRQ's are not running anyway for this port. |
| 3189 | */ |
| 3190 | DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); |
| 3191 | |
| 3192 | if (info->xmit.head != info->xmit.tail && |
| 3193 | !tty->stopped && |
| 3194 | !tty->hw_stopped && |
| 3195 | !info->tr_running) { |
| 3196 | start_transmit(info); |
| 3197 | } |
| 3198 | |
| 3199 | return ret; |
| 3200 | } /* raw_raw_write() */ |
| 3201 | |
| 3202 | static int |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3203 | rs_write(struct tty_struct *tty, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3204 | const unsigned char *buf, int count) |
| 3205 | { |
| 3206 | #if defined(CONFIG_ETRAX_RS485) |
| 3207 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3208 | |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3209 | if (info->rs485.flags & SER_RS485_ENABLED) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3210 | { |
| 3211 | /* If we are in RS-485 mode, we need to toggle RTS and disable |
| 3212 | * the receiver before initiating a DMA transfer |
| 3213 | */ |
| 3214 | #ifdef CONFIG_ETRAX_FAST_TIMER |
| 3215 | /* Abort any started timer */ |
| 3216 | fast_timers_rs485[info->line].function = NULL; |
| 3217 | del_fast_timer(&fast_timers_rs485[info->line]); |
| 3218 | #endif |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3219 | e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3220 | #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) |
| 3221 | e100_disable_rx(info); |
| 3222 | e100_enable_rx_irq(info); |
| 3223 | #endif |
Claudio Scordino | 93f3350 | 2011-11-09 15:51:49 +0100 | [diff] [blame] | 3224 | if (info->rs485.delay_rts_before_send > 0) |
| 3225 | msleep(info->rs485.delay_rts_before_send); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3226 | } |
| 3227 | #endif /* CONFIG_ETRAX_RS485 */ |
| 3228 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3229 | count = rs_raw_write(tty, buf, count); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3230 | |
| 3231 | #if defined(CONFIG_ETRAX_RS485) |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3232 | if (info->rs485.flags & SER_RS485_ENABLED) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3233 | { |
| 3234 | unsigned int val; |
| 3235 | /* If we are in RS-485 mode the following has to be done: |
| 3236 | * wait until DMA is ready |
| 3237 | * wait on transmit shift register |
| 3238 | * toggle RTS |
| 3239 | * enable the receiver |
| 3240 | */ |
| 3241 | |
| 3242 | /* Sleep until all sent */ |
| 3243 | tty_wait_until_sent(tty, 0); |
| 3244 | #ifdef CONFIG_ETRAX_FAST_TIMER |
| 3245 | /* Now sleep a little more so that shift register is empty */ |
| 3246 | schedule_usleep(info->char_time_usec * 2); |
| 3247 | #endif |
| 3248 | /* wait on transmit shift register */ |
| 3249 | do{ |
| 3250 | get_lsr_info(info, &val); |
| 3251 | }while (!(val & TIOCSER_TEMT)); |
| 3252 | |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3253 | e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3254 | |
| 3255 | #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) |
| 3256 | e100_enable_rx(info); |
| 3257 | e100_enable_rxdma_irq(info); |
| 3258 | #endif |
| 3259 | } |
| 3260 | #endif /* CONFIG_ETRAX_RS485 */ |
| 3261 | |
| 3262 | return count; |
| 3263 | } /* rs_write */ |
| 3264 | |
| 3265 | |
| 3266 | /* how much space is available in the xmit buffer? */ |
| 3267 | |
| 3268 | static int |
| 3269 | rs_write_room(struct tty_struct *tty) |
| 3270 | { |
| 3271 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3272 | |
| 3273 | return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); |
| 3274 | } |
| 3275 | |
| 3276 | /* How many chars are in the xmit buffer? |
| 3277 | * This does not include any chars in the transmitter FIFO. |
| 3278 | * Use wait_until_sent for waiting for FIFO drain. |
| 3279 | */ |
| 3280 | |
| 3281 | static int |
| 3282 | rs_chars_in_buffer(struct tty_struct *tty) |
| 3283 | { |
| 3284 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3285 | |
| 3286 | return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); |
| 3287 | } |
| 3288 | |
| 3289 | /* discard everything in the xmit buffer */ |
| 3290 | |
| 3291 | static void |
| 3292 | rs_flush_buffer(struct tty_struct *tty) |
| 3293 | { |
| 3294 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3295 | unsigned long flags; |
| 3296 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3297 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3298 | info->xmit.head = info->xmit.tail = 0; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3299 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3300 | |
Jiri Slaby | b963a84 | 2007-02-10 01:44:55 -0800 | [diff] [blame] | 3301 | tty_wakeup(tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3302 | } |
| 3303 | |
| 3304 | /* |
| 3305 | * This function is used to send a high-priority XON/XOFF character to |
| 3306 | * the device |
| 3307 | * |
| 3308 | * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), |
| 3309 | * but we do it in handle_ser_tx_interrupt(). |
| 3310 | * We disable DMA channel and enable tx ready interrupt and write the |
| 3311 | * character when possible. |
| 3312 | */ |
| 3313 | static void rs_send_xchar(struct tty_struct *tty, char ch) |
| 3314 | { |
| 3315 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3316 | unsigned long flags; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3317 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3318 | if (info->uses_dma_out) { |
| 3319 | /* Put the DMA on hold and disable the channel */ |
| 3320 | *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); |
| 3321 | while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != |
| 3322 | IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); |
| 3323 | e100_disable_txdma_channel(info); |
| 3324 | } |
| 3325 | |
| 3326 | /* Must make sure transmitter is not stopped before we can transmit */ |
| 3327 | if (tty->stopped) |
| 3328 | rs_start(tty); |
| 3329 | |
| 3330 | /* Enable manual transmit interrupt and send from there */ |
| 3331 | DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); |
| 3332 | info->x_char = ch; |
| 3333 | e100_enable_serial_tx_ready_irq(info); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3334 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3335 | } |
| 3336 | |
| 3337 | /* |
| 3338 | * ------------------------------------------------------------ |
| 3339 | * rs_throttle() |
| 3340 | * |
| 3341 | * This routine is called by the upper-layer tty layer to signal that |
| 3342 | * incoming characters should be throttled. |
| 3343 | * ------------------------------------------------------------ |
| 3344 | */ |
| 3345 | static void |
| 3346 | rs_throttle(struct tty_struct * tty) |
| 3347 | { |
| 3348 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3349 | #ifdef SERIAL_DEBUG_THROTTLE |
| 3350 | char buf[64]; |
| 3351 | |
| 3352 | printk("throttle %s: %lu....\n", tty_name(tty, buf), |
| 3353 | (unsigned long)tty->ldisc.chars_in_buffer(tty)); |
| 3354 | #endif |
| 3355 | DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); |
| 3356 | |
| 3357 | /* Do RTS before XOFF since XOFF might take some time */ |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 3358 | if (tty->termios.c_cflag & CRTSCTS) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3359 | /* Turn off RTS line */ |
| 3360 | e100_rts(info, 0); |
| 3361 | } |
| 3362 | if (I_IXOFF(tty)) |
| 3363 | rs_send_xchar(tty, STOP_CHAR(tty)); |
| 3364 | |
| 3365 | } |
| 3366 | |
| 3367 | static void |
| 3368 | rs_unthrottle(struct tty_struct * tty) |
| 3369 | { |
| 3370 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3371 | #ifdef SERIAL_DEBUG_THROTTLE |
| 3372 | char buf[64]; |
| 3373 | |
| 3374 | printk("unthrottle %s: %lu....\n", tty_name(tty, buf), |
| 3375 | (unsigned long)tty->ldisc.chars_in_buffer(tty)); |
| 3376 | #endif |
| 3377 | DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); |
| 3378 | DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); |
| 3379 | /* Do RTS before XOFF since XOFF might take some time */ |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 3380 | if (tty->termios.c_cflag & CRTSCTS) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3381 | /* Assert RTS line */ |
| 3382 | e100_rts(info, 1); |
| 3383 | } |
| 3384 | |
| 3385 | if (I_IXOFF(tty)) { |
| 3386 | if (info->x_char) |
| 3387 | info->x_char = 0; |
| 3388 | else |
| 3389 | rs_send_xchar(tty, START_CHAR(tty)); |
| 3390 | } |
| 3391 | |
| 3392 | } |
| 3393 | |
| 3394 | /* |
| 3395 | * ------------------------------------------------------------ |
| 3396 | * rs_ioctl() and friends |
| 3397 | * ------------------------------------------------------------ |
| 3398 | */ |
| 3399 | |
| 3400 | static int |
| 3401 | get_serial_info(struct e100_serial * info, |
| 3402 | struct serial_struct * retinfo) |
| 3403 | { |
| 3404 | struct serial_struct tmp; |
| 3405 | |
| 3406 | /* this is all probably wrong, there are a lot of fields |
| 3407 | * here that we don't have in e100_serial and maybe we |
| 3408 | * should set them to something else than 0. |
| 3409 | */ |
| 3410 | |
| 3411 | if (!retinfo) |
| 3412 | return -EFAULT; |
| 3413 | memset(&tmp, 0, sizeof(tmp)); |
| 3414 | tmp.type = info->type; |
| 3415 | tmp.line = info->line; |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3416 | tmp.port = (int)info->ioport; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3417 | tmp.irq = info->irq; |
| 3418 | tmp.flags = info->flags; |
| 3419 | tmp.baud_base = info->baud_base; |
| 3420 | tmp.close_delay = info->close_delay; |
| 3421 | tmp.closing_wait = info->closing_wait; |
| 3422 | tmp.custom_divisor = info->custom_divisor; |
| 3423 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) |
| 3424 | return -EFAULT; |
| 3425 | return 0; |
| 3426 | } |
| 3427 | |
| 3428 | static int |
| 3429 | set_serial_info(struct e100_serial *info, |
| 3430 | struct serial_struct *new_info) |
| 3431 | { |
| 3432 | struct serial_struct new_serial; |
| 3433 | struct e100_serial old_info; |
| 3434 | int retval = 0; |
| 3435 | |
| 3436 | if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) |
| 3437 | return -EFAULT; |
| 3438 | |
| 3439 | old_info = *info; |
| 3440 | |
| 3441 | if (!capable(CAP_SYS_ADMIN)) { |
| 3442 | if ((new_serial.type != info->type) || |
| 3443 | (new_serial.close_delay != info->close_delay) || |
| 3444 | ((new_serial.flags & ~ASYNC_USR_MASK) != |
| 3445 | (info->flags & ~ASYNC_USR_MASK))) |
| 3446 | return -EPERM; |
| 3447 | info->flags = ((info->flags & ~ASYNC_USR_MASK) | |
| 3448 | (new_serial.flags & ASYNC_USR_MASK)); |
| 3449 | goto check_and_exit; |
| 3450 | } |
| 3451 | |
| 3452 | if (info->count > 1) |
| 3453 | return -EBUSY; |
| 3454 | |
| 3455 | /* |
| 3456 | * OK, past this point, all the error checking has been done. |
| 3457 | * At this point, we start making changes..... |
| 3458 | */ |
| 3459 | |
| 3460 | info->baud_base = new_serial.baud_base; |
| 3461 | info->flags = ((info->flags & ~ASYNC_FLAGS) | |
| 3462 | (new_serial.flags & ASYNC_FLAGS)); |
| 3463 | info->custom_divisor = new_serial.custom_divisor; |
| 3464 | info->type = new_serial.type; |
| 3465 | info->close_delay = new_serial.close_delay; |
| 3466 | info->closing_wait = new_serial.closing_wait; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 3467 | info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3468 | |
| 3469 | check_and_exit: |
| 3470 | if (info->flags & ASYNC_INITIALIZED) { |
| 3471 | change_speed(info); |
| 3472 | } else |
| 3473 | retval = startup(info); |
| 3474 | return retval; |
| 3475 | } |
| 3476 | |
| 3477 | /* |
| 3478 | * get_lsr_info - get line status register info |
| 3479 | * |
| 3480 | * Purpose: Let user call ioctl() to get info when the UART physically |
| 3481 | * is emptied. On bus types like RS485, the transmitter must |
| 3482 | * release the bus after transmitting. This must be done when |
| 3483 | * the transmit shift register is empty, not be done when the |
| 3484 | * transmit holding register is empty. This functionality |
| 3485 | * allows an RS485 driver to be written in user space. |
| 3486 | */ |
| 3487 | static int |
| 3488 | get_lsr_info(struct e100_serial * info, unsigned int *value) |
| 3489 | { |
| 3490 | unsigned int result = TIOCSER_TEMT; |
| 3491 | #ifndef CONFIG_SVINTO_SIM |
| 3492 | unsigned long curr_time = jiffies; |
| 3493 | unsigned long curr_time_usec = GET_JIFFIES_USEC(); |
| 3494 | unsigned long elapsed_usec = |
| 3495 | (curr_time - info->last_tx_active) * 1000000/HZ + |
| 3496 | curr_time_usec - info->last_tx_active_usec; |
| 3497 | |
| 3498 | if (info->xmit.head != info->xmit.tail || |
| 3499 | elapsed_usec < 2*info->char_time_usec) { |
| 3500 | result = 0; |
| 3501 | } |
| 3502 | #endif |
| 3503 | |
| 3504 | if (copy_to_user(value, &result, sizeof(int))) |
| 3505 | return -EFAULT; |
| 3506 | return 0; |
| 3507 | } |
| 3508 | |
| 3509 | #ifdef SERIAL_DEBUG_IO |
| 3510 | struct state_str |
| 3511 | { |
| 3512 | int state; |
| 3513 | const char *str; |
| 3514 | }; |
| 3515 | |
| 3516 | const struct state_str control_state_str[] = { |
| 3517 | {TIOCM_DTR, "DTR" }, |
| 3518 | {TIOCM_RTS, "RTS"}, |
| 3519 | {TIOCM_ST, "ST?" }, |
| 3520 | {TIOCM_SR, "SR?" }, |
| 3521 | {TIOCM_CTS, "CTS" }, |
| 3522 | {TIOCM_CD, "CD" }, |
| 3523 | {TIOCM_RI, "RI" }, |
| 3524 | {TIOCM_DSR, "DSR" }, |
| 3525 | {0, NULL } |
| 3526 | }; |
| 3527 | |
| 3528 | char *get_control_state_str(int MLines, char *s) |
| 3529 | { |
| 3530 | int i = 0; |
| 3531 | |
| 3532 | s[0]='\0'; |
| 3533 | while (control_state_str[i].str != NULL) { |
| 3534 | if (MLines & control_state_str[i].state) { |
| 3535 | if (s[0] != '\0') { |
| 3536 | strcat(s, ", "); |
| 3537 | } |
| 3538 | strcat(s, control_state_str[i].str); |
| 3539 | } |
| 3540 | i++; |
| 3541 | } |
| 3542 | return s; |
| 3543 | } |
| 3544 | #endif |
| 3545 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3546 | static int |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3547 | rs_break(struct tty_struct *tty, int break_state) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3548 | { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3549 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3550 | unsigned long flags; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3551 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3552 | if (!info->ioport) |
| 3553 | return -EIO; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3554 | |
| 3555 | local_irq_save(flags); |
| 3556 | if (break_state == -1) { |
| 3557 | /* Go to manual mode and set the txd pin to 0 */ |
| 3558 | /* Clear bit 7 (txd) and 6 (tr_enable) */ |
| 3559 | info->tx_ctrl &= 0x3F; |
| 3560 | } else { |
| 3561 | /* Set bit 7 (txd) and 6 (tr_enable) */ |
| 3562 | info->tx_ctrl |= (0x80 | 0x40); |
| 3563 | } |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3564 | info->ioport[REG_TR_CTRL] = info->tx_ctrl; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3565 | local_irq_restore(flags); |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 3566 | return 0; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3567 | } |
| 3568 | |
| 3569 | static int |
Alan Cox | 20b9d17 | 2011-02-14 16:26:50 +0000 | [diff] [blame] | 3570 | rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3571 | { |
| 3572 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3573 | unsigned long flags; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3574 | |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3575 | local_irq_save(flags); |
Alan Cox | 032c17e | 2008-04-28 02:13:50 -0700 | [diff] [blame] | 3576 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3577 | if (clear & TIOCM_RTS) |
| 3578 | e100_rts(info, 0); |
| 3579 | if (clear & TIOCM_DTR) |
| 3580 | e100_dtr(info, 0); |
| 3581 | /* Handle FEMALE behaviour */ |
| 3582 | if (clear & TIOCM_RI) |
| 3583 | e100_ri_out(info, 0); |
| 3584 | if (clear & TIOCM_CD) |
| 3585 | e100_cd_out(info, 0); |
| 3586 | |
| 3587 | if (set & TIOCM_RTS) |
| 3588 | e100_rts(info, 1); |
| 3589 | if (set & TIOCM_DTR) |
| 3590 | e100_dtr(info, 1); |
| 3591 | /* Handle FEMALE behaviour */ |
| 3592 | if (set & TIOCM_RI) |
| 3593 | e100_ri_out(info, 1); |
| 3594 | if (set & TIOCM_CD) |
| 3595 | e100_cd_out(info, 1); |
Alan Cox | 032c17e | 2008-04-28 02:13:50 -0700 | [diff] [blame] | 3596 | |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3597 | local_irq_restore(flags); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3598 | return 0; |
| 3599 | } |
| 3600 | |
| 3601 | static int |
Alan Cox | 60b33c1 | 2011-02-14 16:26:14 +0000 | [diff] [blame] | 3602 | rs_tiocmget(struct tty_struct *tty) |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3603 | { |
| 3604 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3605 | unsigned int result; |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3606 | unsigned long flags; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3607 | |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3608 | local_irq_save(flags); |
| 3609 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3610 | result = |
| 3611 | (!E100_RTS_GET(info) ? TIOCM_RTS : 0) |
| 3612 | | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) |
| 3613 | | (!E100_RI_GET(info) ? TIOCM_RNG : 0) |
| 3614 | | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) |
| 3615 | | (!E100_CD_GET(info) ? TIOCM_CAR : 0) |
| 3616 | | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); |
| 3617 | |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3618 | local_irq_restore(flags); |
Alan Cox | 032c17e | 2008-04-28 02:13:50 -0700 | [diff] [blame] | 3619 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3620 | #ifdef SERIAL_DEBUG_IO |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3621 | printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", |
| 3622 | info->line, result, result); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3623 | { |
| 3624 | char s[100]; |
| 3625 | |
| 3626 | get_control_state_str(result, s); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3627 | printk(KERN_DEBUG "state: %s\n", s); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3628 | } |
| 3629 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3630 | return result; |
| 3631 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3632 | } |
| 3633 | |
| 3634 | |
| 3635 | static int |
Alan Cox | 6caa76b | 2011-02-14 16:27:22 +0000 | [diff] [blame] | 3636 | rs_ioctl(struct tty_struct *tty, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3637 | unsigned int cmd, unsigned long arg) |
| 3638 | { |
| 3639 | struct e100_serial * info = (struct e100_serial *)tty->driver_data; |
| 3640 | |
| 3641 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && |
| 3642 | (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && |
| 3643 | (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { |
| 3644 | if (tty->flags & (1 << TTY_IO_ERROR)) |
| 3645 | return -EIO; |
| 3646 | } |
| 3647 | |
| 3648 | switch (cmd) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3649 | case TIOCGSERIAL: |
| 3650 | return get_serial_info(info, |
| 3651 | (struct serial_struct *) arg); |
| 3652 | case TIOCSSERIAL: |
| 3653 | return set_serial_info(info, |
| 3654 | (struct serial_struct *) arg); |
| 3655 | case TIOCSERGETLSR: /* Get line status register */ |
| 3656 | return get_lsr_info(info, (unsigned int *) arg); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3657 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3658 | case TIOCSERGSTRUCT: |
| 3659 | if (copy_to_user((struct e100_serial *) arg, |
| 3660 | info, sizeof(struct e100_serial))) |
| 3661 | return -EFAULT; |
| 3662 | return 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3663 | |
| 3664 | #if defined(CONFIG_ETRAX_RS485) |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3665 | case TIOCSERSETRS485: |
| 3666 | { |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3667 | /* In this ioctl we still use the old structure |
| 3668 | * rs485_control for backward compatibility |
| 3669 | * (if we use serial_rs485, then old user-level code |
| 3670 | * wouldn't work anymore...). |
| 3671 | * The use of this ioctl is deprecated: use TIOCSRS485 |
| 3672 | * instead.*/ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3673 | struct rs485_control rs485ctrl; |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3674 | struct serial_rs485 rs485data; |
| 3675 | printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3676 | if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, |
| 3677 | sizeof(rs485ctrl))) |
| 3678 | return -EFAULT; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3679 | |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3680 | rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; |
| 3681 | rs485data.flags = 0; |
Jesper Nilsson | c7213fc | 2010-10-28 12:08:27 +0200 | [diff] [blame] | 3682 | |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3683 | if (rs485ctrl.enabled) |
| 3684 | rs485data.flags |= SER_RS485_ENABLED; |
| 3685 | else |
| 3686 | rs485data.flags &= ~(SER_RS485_ENABLED); |
| 3687 | |
| 3688 | if (rs485ctrl.rts_on_send) |
| 3689 | rs485data.flags |= SER_RS485_RTS_ON_SEND; |
| 3690 | else |
| 3691 | rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); |
| 3692 | |
| 3693 | if (rs485ctrl.rts_after_sent) |
| 3694 | rs485data.flags |= SER_RS485_RTS_AFTER_SEND; |
| 3695 | else |
| 3696 | rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); |
| 3697 | |
| 3698 | return e100_enable_rs485(tty, &rs485data); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3699 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3700 | |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3701 | case TIOCSRS485: |
| 3702 | { |
| 3703 | /* This is the new version of TIOCSRS485, with new |
| 3704 | * data structure serial_rs485 */ |
| 3705 | struct serial_rs485 rs485data; |
| 3706 | if (copy_from_user(&rs485data, (struct rs485_control *)arg, |
| 3707 | sizeof(rs485data))) |
| 3708 | return -EFAULT; |
| 3709 | |
| 3710 | return e100_enable_rs485(tty, &rs485data); |
| 3711 | } |
| 3712 | |
Claudio Scordino | f1d23ed | 2010-05-31 10:19:09 +0200 | [diff] [blame] | 3713 | case TIOCGRS485: |
| 3714 | { |
| 3715 | struct serial_rs485 *rs485data = |
| 3716 | &(((struct e100_serial *)tty->driver_data)->rs485); |
| 3717 | /* This is the ioctl to get RS485 data from user-space */ |
| 3718 | if (copy_to_user((struct serial_rs485 *) arg, |
| 3719 | rs485data, |
Jesper Nilsson | 94479c0 | 2010-10-28 12:04:55 +0200 | [diff] [blame] | 3720 | sizeof(struct serial_rs485))) |
Claudio Scordino | f1d23ed | 2010-05-31 10:19:09 +0200 | [diff] [blame] | 3721 | return -EFAULT; |
| 3722 | break; |
| 3723 | } |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3724 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3725 | case TIOCSERWRRS485: |
| 3726 | { |
| 3727 | struct rs485_write rs485wr; |
| 3728 | if (copy_from_user(&rs485wr, (struct rs485_write *)arg, |
| 3729 | sizeof(rs485wr))) |
| 3730 | return -EFAULT; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3731 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3732 | return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); |
| 3733 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3734 | #endif |
| 3735 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3736 | default: |
| 3737 | return -ENOIOCTLCMD; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3738 | } |
| 3739 | return 0; |
| 3740 | } |
| 3741 | |
| 3742 | static void |
Alan Cox | 606d099 | 2006-12-08 02:38:45 -0800 | [diff] [blame] | 3743 | rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3744 | { |
| 3745 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3746 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3747 | change_speed(info); |
| 3748 | |
| 3749 | /* Handle turning off CRTSCTS */ |
| 3750 | if ((old_termios->c_cflag & CRTSCTS) && |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 3751 | !(tty->termios.c_cflag & CRTSCTS)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3752 | tty->hw_stopped = 0; |
| 3753 | rs_start(tty); |
| 3754 | } |
| 3755 | |
| 3756 | } |
| 3757 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3758 | /* |
| 3759 | * ------------------------------------------------------------ |
| 3760 | * rs_close() |
| 3761 | * |
| 3762 | * This routine is called when the serial port gets closed. First, we |
| 3763 | * wait for the last remaining data to be sent. Then, we unlink its |
| 3764 | * S structure from the interrupt chain if necessary, and we free |
| 3765 | * that IRQ if nothing is left in the chain. |
| 3766 | * ------------------------------------------------------------ |
| 3767 | */ |
| 3768 | static void |
| 3769 | rs_close(struct tty_struct *tty, struct file * filp) |
| 3770 | { |
| 3771 | struct e100_serial * info = (struct e100_serial *)tty->driver_data; |
| 3772 | unsigned long flags; |
| 3773 | |
| 3774 | if (!info) |
| 3775 | return; |
| 3776 | |
| 3777 | /* interrupts are disabled for this entire function */ |
| 3778 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3779 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3780 | |
| 3781 | if (tty_hung_up_p(filp)) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3782 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3783 | return; |
| 3784 | } |
| 3785 | |
| 3786 | #ifdef SERIAL_DEBUG_OPEN |
| 3787 | printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, |
| 3788 | info->line, info->count); |
| 3789 | #endif |
| 3790 | if ((tty->count == 1) && (info->count != 1)) { |
| 3791 | /* |
| 3792 | * Uh, oh. tty->count is 1, which means that the tty |
| 3793 | * structure will be freed. Info->count should always |
| 3794 | * be one in these conditions. If it's greater than |
| 3795 | * one, we've got real problems, since it means the |
| 3796 | * serial port won't be shutdown. |
| 3797 | */ |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 3798 | printk(KERN_ERR |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3799 | "rs_close: bad serial port count; tty->count is 1, " |
| 3800 | "info->count is %d\n", info->count); |
| 3801 | info->count = 1; |
| 3802 | } |
| 3803 | if (--info->count < 0) { |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 3804 | printk(KERN_ERR "rs_close: bad serial port count for ttyS%d: %d\n", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3805 | info->line, info->count); |
| 3806 | info->count = 0; |
| 3807 | } |
| 3808 | if (info->count) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3809 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3810 | return; |
| 3811 | } |
| 3812 | info->flags |= ASYNC_CLOSING; |
| 3813 | /* |
| 3814 | * Save the termios structure, since this port may have |
| 3815 | * separate termios for callout and dialin. |
| 3816 | */ |
| 3817 | if (info->flags & ASYNC_NORMAL_ACTIVE) |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 3818 | info->normal_termios = tty->termios; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3819 | /* |
| 3820 | * Now we wait for the transmit buffer to clear; and we notify |
| 3821 | * the line discipline to only process XON/XOFF characters. |
| 3822 | */ |
| 3823 | tty->closing = 1; |
| 3824 | if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) |
| 3825 | tty_wait_until_sent(tty, info->closing_wait); |
| 3826 | /* |
| 3827 | * At this point we stop accepting input. To do this, we |
| 3828 | * disable the serial receiver and the DMA receive interrupt. |
| 3829 | */ |
| 3830 | #ifdef SERIAL_HANDLE_EARLY_ERRORS |
| 3831 | e100_disable_serial_data_irq(info); |
| 3832 | #endif |
| 3833 | |
| 3834 | #ifndef CONFIG_SVINTO_SIM |
| 3835 | e100_disable_rx(info); |
| 3836 | e100_disable_rx_irq(info); |
| 3837 | |
| 3838 | if (info->flags & ASYNC_INITIALIZED) { |
| 3839 | /* |
| 3840 | * Before we drop DTR, make sure the UART transmitter |
| 3841 | * has completely drained; this is especially |
| 3842 | * important as we have a transmit FIFO! |
| 3843 | */ |
| 3844 | rs_wait_until_sent(tty, HZ); |
| 3845 | } |
| 3846 | #endif |
| 3847 | |
| 3848 | shutdown(info); |
Alan Cox | 978e595 | 2008-04-30 00:53:59 -0700 | [diff] [blame] | 3849 | rs_flush_buffer(tty); |
Alan Cox | 454aa38 | 2008-05-12 12:31:37 +0100 | [diff] [blame] | 3850 | tty_ldisc_flush(tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3851 | tty->closing = 0; |
| 3852 | info->event = 0; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 3853 | info->port.tty = NULL; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3854 | if (info->blocked_open) { |
Nishanth Aravamudan | 3c76bc5 | 2005-11-07 01:01:21 -0800 | [diff] [blame] | 3855 | if (info->close_delay) |
| 3856 | schedule_timeout_interruptible(info->close_delay); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3857 | wake_up_interruptible(&info->open_wait); |
| 3858 | } |
| 3859 | info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); |
| 3860 | wake_up_interruptible(&info->close_wait); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3861 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3862 | |
| 3863 | /* port closed */ |
| 3864 | |
| 3865 | #if defined(CONFIG_ETRAX_RS485) |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 3866 | if (info->rs485.flags & SER_RS485_ENABLED) { |
| 3867 | info->rs485.flags &= ~(SER_RS485_ENABLED); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3868 | #if defined(CONFIG_ETRAX_RS485_ON_PA) |
| 3869 | *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); |
| 3870 | #endif |
| 3871 | #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) |
| 3872 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 3873 | rs485_port_g_bit, 0); |
| 3874 | #endif |
| 3875 | #if defined(CONFIG_ETRAX_RS485_LTC1387) |
| 3876 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 3877 | CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); |
| 3878 | REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, |
| 3879 | CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); |
| 3880 | #endif |
| 3881 | } |
| 3882 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3883 | |
| 3884 | /* |
| 3885 | * Release any allocated DMA irq's. |
| 3886 | */ |
| 3887 | if (info->dma_in_enabled) { |
| 3888 | free_irq(info->dma_in_irq_nbr, info); |
| 3889 | cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); |
| 3890 | info->uses_dma_in = 0; |
| 3891 | #ifdef SERIAL_DEBUG_OPEN |
| 3892 | printk(KERN_DEBUG "DMA irq '%s' freed\n", |
| 3893 | info->dma_in_irq_description); |
| 3894 | #endif |
| 3895 | } |
| 3896 | if (info->dma_out_enabled) { |
| 3897 | free_irq(info->dma_out_irq_nbr, info); |
| 3898 | cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); |
| 3899 | info->uses_dma_out = 0; |
| 3900 | #ifdef SERIAL_DEBUG_OPEN |
| 3901 | printk(KERN_DEBUG "DMA irq '%s' freed\n", |
| 3902 | info->dma_out_irq_description); |
| 3903 | #endif |
| 3904 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3905 | } |
| 3906 | |
| 3907 | /* |
| 3908 | * rs_wait_until_sent() --- wait until the transmitter is empty |
| 3909 | */ |
| 3910 | static void rs_wait_until_sent(struct tty_struct *tty, int timeout) |
| 3911 | { |
| 3912 | unsigned long orig_jiffies; |
| 3913 | struct e100_serial *info = (struct e100_serial *)tty->driver_data; |
| 3914 | unsigned long curr_time = jiffies; |
| 3915 | unsigned long curr_time_usec = GET_JIFFIES_USEC(); |
| 3916 | long elapsed_usec = |
| 3917 | (curr_time - info->last_tx_active) * (1000000/HZ) + |
| 3918 | curr_time_usec - info->last_tx_active_usec; |
| 3919 | |
| 3920 | /* |
| 3921 | * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO |
| 3922 | * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) |
| 3923 | */ |
| 3924 | orig_jiffies = jiffies; |
| 3925 | while (info->xmit.head != info->xmit.tail || /* More in send queue */ |
| 3926 | (*info->ostatusadr & 0x007f) || /* more in FIFO */ |
| 3927 | (elapsed_usec < 2*info->char_time_usec)) { |
Nishanth Aravamudan | 3c76bc5 | 2005-11-07 01:01:21 -0800 | [diff] [blame] | 3928 | schedule_timeout_interruptible(1); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3929 | if (signal_pending(current)) |
| 3930 | break; |
| 3931 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) |
| 3932 | break; |
| 3933 | curr_time = jiffies; |
| 3934 | curr_time_usec = GET_JIFFIES_USEC(); |
| 3935 | elapsed_usec = |
| 3936 | (curr_time - info->last_tx_active) * (1000000/HZ) + |
| 3937 | curr_time_usec - info->last_tx_active_usec; |
| 3938 | } |
| 3939 | set_current_state(TASK_RUNNING); |
| 3940 | } |
| 3941 | |
| 3942 | /* |
| 3943 | * rs_hangup() --- called by tty_hangup() when a hangup is signaled. |
| 3944 | */ |
| 3945 | void |
| 3946 | rs_hangup(struct tty_struct *tty) |
| 3947 | { |
| 3948 | struct e100_serial * info = (struct e100_serial *)tty->driver_data; |
| 3949 | |
| 3950 | rs_flush_buffer(tty); |
| 3951 | shutdown(info); |
| 3952 | info->event = 0; |
| 3953 | info->count = 0; |
| 3954 | info->flags &= ~ASYNC_NORMAL_ACTIVE; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 3955 | info->port.tty = NULL; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3956 | wake_up_interruptible(&info->open_wait); |
| 3957 | } |
| 3958 | |
| 3959 | /* |
| 3960 | * ------------------------------------------------------------ |
| 3961 | * rs_open() and friends |
| 3962 | * ------------------------------------------------------------ |
| 3963 | */ |
| 3964 | static int |
| 3965 | block_til_ready(struct tty_struct *tty, struct file * filp, |
| 3966 | struct e100_serial *info) |
| 3967 | { |
| 3968 | DECLARE_WAITQUEUE(wait, current); |
| 3969 | unsigned long flags; |
| 3970 | int retval; |
| 3971 | int do_clocal = 0, extra_count = 0; |
| 3972 | |
| 3973 | /* |
| 3974 | * If the device is in the middle of being closed, then block |
| 3975 | * until it's done, and then try again. |
| 3976 | */ |
| 3977 | if (tty_hung_up_p(filp) || |
| 3978 | (info->flags & ASYNC_CLOSING)) { |
Alan Cox | 89c8d91 | 2012-08-08 16:30:13 +0100 | [diff] [blame^] | 3979 | wait_event_interruptible_tty(tty, info->close_wait, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 3980 | !(info->flags & ASYNC_CLOSING)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3981 | #ifdef SERIAL_DO_RESTART |
| 3982 | if (info->flags & ASYNC_HUP_NOTIFY) |
| 3983 | return -EAGAIN; |
| 3984 | else |
| 3985 | return -ERESTARTSYS; |
| 3986 | #else |
| 3987 | return -EAGAIN; |
| 3988 | #endif |
| 3989 | } |
| 3990 | |
| 3991 | /* |
| 3992 | * If non-blocking mode is set, or the port is not enabled, |
| 3993 | * then make the check up front and then exit. |
| 3994 | */ |
| 3995 | if ((filp->f_flags & O_NONBLOCK) || |
| 3996 | (tty->flags & (1 << TTY_IO_ERROR))) { |
| 3997 | info->flags |= ASYNC_NORMAL_ACTIVE; |
| 3998 | return 0; |
| 3999 | } |
| 4000 | |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 4001 | if (tty->termios.c_cflag & CLOCAL) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4002 | do_clocal = 1; |
| 4003 | } |
| 4004 | |
| 4005 | /* |
| 4006 | * Block waiting for the carrier detect and the line to become |
| 4007 | * free (i.e., not in use by the callout). While we are in |
| 4008 | * this loop, info->count is dropped by one, so that |
| 4009 | * rs_close() knows when to free things. We restore it upon |
| 4010 | * exit, either normal or abnormal. |
| 4011 | */ |
| 4012 | retval = 0; |
| 4013 | add_wait_queue(&info->open_wait, &wait); |
| 4014 | #ifdef SERIAL_DEBUG_OPEN |
| 4015 | printk("block_til_ready before block: ttyS%d, count = %d\n", |
| 4016 | info->line, info->count); |
| 4017 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4018 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4019 | if (!tty_hung_up_p(filp)) { |
| 4020 | extra_count++; |
| 4021 | info->count--; |
| 4022 | } |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4023 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4024 | info->blocked_open++; |
| 4025 | while (1) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4026 | local_irq_save(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4027 | /* assert RTS and DTR */ |
| 4028 | e100_rts(info, 1); |
| 4029 | e100_dtr(info, 1); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4030 | local_irq_restore(flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4031 | set_current_state(TASK_INTERRUPTIBLE); |
| 4032 | if (tty_hung_up_p(filp) || |
| 4033 | !(info->flags & ASYNC_INITIALIZED)) { |
| 4034 | #ifdef SERIAL_DO_RESTART |
| 4035 | if (info->flags & ASYNC_HUP_NOTIFY) |
| 4036 | retval = -EAGAIN; |
| 4037 | else |
| 4038 | retval = -ERESTARTSYS; |
| 4039 | #else |
| 4040 | retval = -EAGAIN; |
| 4041 | #endif |
| 4042 | break; |
| 4043 | } |
| 4044 | if (!(info->flags & ASYNC_CLOSING) && do_clocal) |
| 4045 | /* && (do_clocal || DCD_IS_ASSERTED) */ |
| 4046 | break; |
| 4047 | if (signal_pending(current)) { |
| 4048 | retval = -ERESTARTSYS; |
| 4049 | break; |
| 4050 | } |
| 4051 | #ifdef SERIAL_DEBUG_OPEN |
| 4052 | printk("block_til_ready blocking: ttyS%d, count = %d\n", |
| 4053 | info->line, info->count); |
| 4054 | #endif |
Alan Cox | 89c8d91 | 2012-08-08 16:30:13 +0100 | [diff] [blame^] | 4055 | tty_unlock(tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4056 | schedule(); |
Alan Cox | 89c8d91 | 2012-08-08 16:30:13 +0100 | [diff] [blame^] | 4057 | tty_lock(tty); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4058 | } |
| 4059 | set_current_state(TASK_RUNNING); |
| 4060 | remove_wait_queue(&info->open_wait, &wait); |
| 4061 | if (extra_count) |
| 4062 | info->count++; |
| 4063 | info->blocked_open--; |
| 4064 | #ifdef SERIAL_DEBUG_OPEN |
| 4065 | printk("block_til_ready after blocking: ttyS%d, count = %d\n", |
| 4066 | info->line, info->count); |
| 4067 | #endif |
| 4068 | if (retval) |
| 4069 | return retval; |
| 4070 | info->flags |= ASYNC_NORMAL_ACTIVE; |
| 4071 | return 0; |
| 4072 | } |
| 4073 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4074 | static void |
| 4075 | deinit_port(struct e100_serial *info) |
| 4076 | { |
| 4077 | if (info->dma_out_enabled) { |
| 4078 | cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); |
| 4079 | free_irq(info->dma_out_irq_nbr, info); |
| 4080 | } |
| 4081 | if (info->dma_in_enabled) { |
| 4082 | cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); |
| 4083 | free_irq(info->dma_in_irq_nbr, info); |
| 4084 | } |
| 4085 | } |
| 4086 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4087 | /* |
| 4088 | * This routine is called whenever a serial port is opened. |
| 4089 | * It performs the serial-specific initialization for the tty structure. |
| 4090 | */ |
| 4091 | static int |
| 4092 | rs_open(struct tty_struct *tty, struct file * filp) |
| 4093 | { |
| 4094 | struct e100_serial *info; |
Jiri Slaby | 410235f | 2012-03-05 14:52:01 +0100 | [diff] [blame] | 4095 | int retval; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4096 | int allocated_resources = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4097 | |
Jiri Slaby | 410235f | 2012-03-05 14:52:01 +0100 | [diff] [blame] | 4098 | info = rs_table + tty->index; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4099 | if (!info->enabled) |
| 4100 | return -ENODEV; |
| 4101 | |
| 4102 | #ifdef SERIAL_DEBUG_OPEN |
| 4103 | printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, |
| 4104 | info->count); |
| 4105 | #endif |
| 4106 | |
| 4107 | info->count++; |
| 4108 | tty->driver_data = info; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 4109 | info->port.tty = tty; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4110 | |
Jiri Slaby | 410235f | 2012-03-05 14:52:01 +0100 | [diff] [blame] | 4111 | tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4112 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4113 | /* |
| 4114 | * If the port is in the middle of closing, bail out now |
| 4115 | */ |
| 4116 | if (tty_hung_up_p(filp) || |
| 4117 | (info->flags & ASYNC_CLOSING)) { |
Alan Cox | 89c8d91 | 2012-08-08 16:30:13 +0100 | [diff] [blame^] | 4118 | wait_event_interruptible_tty(tty, info->close_wait, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4119 | !(info->flags & ASYNC_CLOSING)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4120 | #ifdef SERIAL_DO_RESTART |
| 4121 | return ((info->flags & ASYNC_HUP_NOTIFY) ? |
| 4122 | -EAGAIN : -ERESTARTSYS); |
| 4123 | #else |
| 4124 | return -EAGAIN; |
| 4125 | #endif |
| 4126 | } |
| 4127 | |
| 4128 | /* |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4129 | * If DMA is enabled try to allocate the irq's. |
| 4130 | */ |
| 4131 | if (info->count == 1) { |
| 4132 | allocated_resources = 1; |
| 4133 | if (info->dma_in_enabled) { |
| 4134 | if (request_irq(info->dma_in_irq_nbr, |
| 4135 | rec_interrupt, |
| 4136 | info->dma_in_irq_flags, |
| 4137 | info->dma_in_irq_description, |
| 4138 | info)) { |
| 4139 | printk(KERN_WARNING "DMA irq '%s' busy; " |
| 4140 | "falling back to non-DMA mode\n", |
| 4141 | info->dma_in_irq_description); |
| 4142 | /* Make sure we never try to use DMA in */ |
| 4143 | /* for the port again. */ |
| 4144 | info->dma_in_enabled = 0; |
| 4145 | } else if (cris_request_dma(info->dma_in_nbr, |
| 4146 | info->dma_in_irq_description, |
| 4147 | DMA_VERBOSE_ON_ERROR, |
| 4148 | info->dma_owner)) { |
| 4149 | free_irq(info->dma_in_irq_nbr, info); |
| 4150 | printk(KERN_WARNING "DMA '%s' busy; " |
| 4151 | "falling back to non-DMA mode\n", |
| 4152 | info->dma_in_irq_description); |
| 4153 | /* Make sure we never try to use DMA in */ |
| 4154 | /* for the port again. */ |
| 4155 | info->dma_in_enabled = 0; |
| 4156 | } |
| 4157 | #ifdef SERIAL_DEBUG_OPEN |
| 4158 | else |
| 4159 | printk(KERN_DEBUG "DMA irq '%s' allocated\n", |
| 4160 | info->dma_in_irq_description); |
| 4161 | #endif |
| 4162 | } |
| 4163 | if (info->dma_out_enabled) { |
| 4164 | if (request_irq(info->dma_out_irq_nbr, |
| 4165 | tr_interrupt, |
| 4166 | info->dma_out_irq_flags, |
| 4167 | info->dma_out_irq_description, |
| 4168 | info)) { |
| 4169 | printk(KERN_WARNING "DMA irq '%s' busy; " |
| 4170 | "falling back to non-DMA mode\n", |
| 4171 | info->dma_out_irq_description); |
| 4172 | /* Make sure we never try to use DMA out */ |
| 4173 | /* for the port again. */ |
| 4174 | info->dma_out_enabled = 0; |
| 4175 | } else if (cris_request_dma(info->dma_out_nbr, |
| 4176 | info->dma_out_irq_description, |
| 4177 | DMA_VERBOSE_ON_ERROR, |
| 4178 | info->dma_owner)) { |
| 4179 | free_irq(info->dma_out_irq_nbr, info); |
| 4180 | printk(KERN_WARNING "DMA '%s' busy; " |
| 4181 | "falling back to non-DMA mode\n", |
| 4182 | info->dma_out_irq_description); |
| 4183 | /* Make sure we never try to use DMA out */ |
| 4184 | /* for the port again. */ |
| 4185 | info->dma_out_enabled = 0; |
| 4186 | } |
| 4187 | #ifdef SERIAL_DEBUG_OPEN |
| 4188 | else |
| 4189 | printk(KERN_DEBUG "DMA irq '%s' allocated\n", |
| 4190 | info->dma_out_irq_description); |
| 4191 | #endif |
| 4192 | } |
| 4193 | } |
| 4194 | |
| 4195 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4196 | * Start up the serial port |
| 4197 | */ |
| 4198 | |
| 4199 | retval = startup(info); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4200 | if (retval) { |
| 4201 | if (allocated_resources) |
| 4202 | deinit_port(info); |
| 4203 | |
| 4204 | /* FIXME Decrease count info->count here too? */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4205 | return retval; |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4206 | } |
| 4207 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4208 | |
| 4209 | retval = block_til_ready(tty, filp, info); |
| 4210 | if (retval) { |
| 4211 | #ifdef SERIAL_DEBUG_OPEN |
| 4212 | printk("rs_open returning after block_til_ready with %d\n", |
| 4213 | retval); |
| 4214 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4215 | if (allocated_resources) |
| 4216 | deinit_port(info); |
| 4217 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4218 | return retval; |
| 4219 | } |
| 4220 | |
| 4221 | if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { |
Alan Cox | adc8d74 | 2012-07-14 15:31:47 +0100 | [diff] [blame] | 4222 | tty->termios = info->normal_termios; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4223 | change_speed(info); |
| 4224 | } |
| 4225 | |
| 4226 | #ifdef SERIAL_DEBUG_OPEN |
| 4227 | printk("rs_open ttyS%d successful...\n", info->line); |
| 4228 | #endif |
| 4229 | DLOG_INT_TRIG( log_int_pos = 0); |
| 4230 | |
| 4231 | DFLIP( if (info->line == SERIAL_DEBUG_LINE) { |
| 4232 | info->icount.rx = 0; |
| 4233 | } ); |
| 4234 | |
| 4235 | return 0; |
| 4236 | } |
| 4237 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4238 | #ifdef CONFIG_PROC_FS |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4239 | /* |
| 4240 | * /proc fs routines.... |
| 4241 | */ |
| 4242 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4243 | static void seq_line_info(struct seq_file *m, struct e100_serial *info) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4244 | { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4245 | unsigned long tmp; |
| 4246 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4247 | seq_printf(m, "%d: uart:E100 port:%lX irq:%d", |
| 4248 | info->line, (unsigned long)info->ioport, info->irq); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4249 | |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 4250 | if (!info->ioport || (info->type == PORT_UNKNOWN)) { |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4251 | seq_printf(m, "\n"); |
| 4252 | return; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4253 | } |
| 4254 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4255 | seq_printf(m, " baud:%d", info->baud); |
| 4256 | seq_printf(m, " tx:%lu rx:%lu", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4257 | (unsigned long)info->icount.tx, |
| 4258 | (unsigned long)info->icount.rx); |
| 4259 | tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4260 | if (tmp) |
| 4261 | seq_printf(m, " tx_pend:%lu/%lu", |
| 4262 | (unsigned long)tmp, |
| 4263 | (unsigned long)SERIAL_XMIT_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4264 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4265 | seq_printf(m, " rx_pend:%lu/%lu", |
| 4266 | (unsigned long)info->recv_cnt, |
| 4267 | (unsigned long)info->max_recv_cnt); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4268 | |
| 4269 | #if 1 |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 4270 | if (info->port.tty) { |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 4271 | if (info->port.tty->stopped) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4272 | seq_printf(m, " stopped:%i", |
| 4273 | (int)info->port.tty->stopped); |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 4274 | if (info->port.tty->hw_stopped) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4275 | seq_printf(m, " hw_stopped:%i", |
| 4276 | (int)info->port.tty->hw_stopped); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4277 | } |
| 4278 | |
| 4279 | { |
Alan Cox | d728335 | 2008-08-04 17:21:18 +0100 | [diff] [blame] | 4280 | unsigned char rstat = info->ioport[REG_STATUS]; |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4281 | if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) |
| 4282 | seq_printf(m, " xoff_detect:1"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4283 | } |
| 4284 | |
| 4285 | #endif |
| 4286 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4287 | if (info->icount.frame) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4288 | seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4289 | |
| 4290 | if (info->icount.parity) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4291 | seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4292 | |
| 4293 | if (info->icount.brk) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4294 | seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4295 | |
| 4296 | if (info->icount.overrun) |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4297 | seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4298 | |
| 4299 | /* |
| 4300 | * Last thing is the RS-232 status lines |
| 4301 | */ |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4302 | if (!E100_RTS_GET(info)) |
| 4303 | seq_puts(m, "|RTS"); |
| 4304 | if (!E100_CTS_GET(info)) |
| 4305 | seq_puts(m, "|CTS"); |
| 4306 | if (!E100_DTR_GET(info)) |
| 4307 | seq_puts(m, "|DTR"); |
| 4308 | if (!E100_DSR_GET(info)) |
| 4309 | seq_puts(m, "|DSR"); |
| 4310 | if (!E100_CD_GET(info)) |
| 4311 | seq_puts(m, "|CD"); |
| 4312 | if (!E100_RI_GET(info)) |
| 4313 | seq_puts(m, "|RI"); |
| 4314 | seq_puts(m, "\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4315 | } |
| 4316 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4317 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4318 | static int crisv10_proc_show(struct seq_file *m, void *v) |
| 4319 | { |
| 4320 | int i; |
| 4321 | |
| 4322 | seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); |
| 4323 | |
| 4324 | for (i = 0; i < NR_PORTS; i++) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4325 | if (!rs_table[i].enabled) |
| 4326 | continue; |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4327 | seq_line_info(m, &rs_table[i]); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4328 | } |
| 4329 | #ifdef DEBUG_LOG_INCLUDED |
| 4330 | for (i = 0; i < debug_log_pos; i++) { |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4331 | seq_printf(m, "%-4i %lu.%lu ", |
| 4332 | i, debug_log[i].time, |
| 4333 | timer_data_to_ns(debug_log[i].timer_data)); |
| 4334 | seq_printf(m, debug_log[i].string, debug_log[i].value); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4335 | } |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4336 | seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4337 | debug_log_pos = 0; |
| 4338 | #endif |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4339 | return 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4340 | } |
| 4341 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4342 | static int crisv10_proc_open(struct inode *inode, struct file *file) |
| 4343 | { |
| 4344 | return single_open(file, crisv10_proc_show, NULL); |
| 4345 | } |
| 4346 | |
| 4347 | static const struct file_operations crisv10_proc_fops = { |
| 4348 | .owner = THIS_MODULE, |
| 4349 | .open = crisv10_proc_open, |
| 4350 | .read = seq_read, |
| 4351 | .llseek = seq_lseek, |
| 4352 | .release = single_release, |
| 4353 | }; |
| 4354 | #endif |
| 4355 | |
| 4356 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4357 | /* Finally, routines used to initialize the serial driver. */ |
| 4358 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4359 | static void show_serial_version(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4360 | { |
| 4361 | printk(KERN_INFO |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4362 | "ETRAX 100LX serial-driver %s, " |
| 4363 | "(c) 2000-2004 Axis Communications AB\r\n", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4364 | &serial_version[11]); /* "$Revision: x.yy" */ |
| 4365 | } |
| 4366 | |
| 4367 | /* rs_init inits the driver at boot (using the module_init chain) */ |
| 4368 | |
Jeff Dike | b68e31d | 2006-10-02 02:17:18 -0700 | [diff] [blame] | 4369 | static const struct tty_operations rs_ops = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4370 | .open = rs_open, |
| 4371 | .close = rs_close, |
| 4372 | .write = rs_write, |
| 4373 | .flush_chars = rs_flush_chars, |
| 4374 | .write_room = rs_write_room, |
| 4375 | .chars_in_buffer = rs_chars_in_buffer, |
| 4376 | .flush_buffer = rs_flush_buffer, |
| 4377 | .ioctl = rs_ioctl, |
| 4378 | .throttle = rs_throttle, |
| 4379 | .unthrottle = rs_unthrottle, |
| 4380 | .set_termios = rs_set_termios, |
| 4381 | .stop = rs_stop, |
| 4382 | .start = rs_start, |
| 4383 | .hangup = rs_hangup, |
| 4384 | .break_ctl = rs_break, |
| 4385 | .send_xchar = rs_send_xchar, |
| 4386 | .wait_until_sent = rs_wait_until_sent, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4387 | .tiocmget = rs_tiocmget, |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4388 | .tiocmset = rs_tiocmset, |
| 4389 | #ifdef CONFIG_PROC_FS |
| 4390 | .proc_fops = &crisv10_proc_fops, |
| 4391 | #endif |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4392 | }; |
| 4393 | |
Jesper Nilsson | 9e040a3 | 2009-04-30 15:08:13 -0700 | [diff] [blame] | 4394 | static int __init rs_init(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4395 | { |
| 4396 | int i; |
| 4397 | struct e100_serial *info; |
| 4398 | struct tty_driver *driver = alloc_tty_driver(NR_PORTS); |
| 4399 | |
| 4400 | if (!driver) |
| 4401 | return -ENOMEM; |
| 4402 | |
| 4403 | show_serial_version(); |
| 4404 | |
| 4405 | /* Setup the timed flush handler system */ |
| 4406 | |
| 4407 | #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4408 | setup_timer(&flush_timer, timed_flush_handler, 0); |
| 4409 | mod_timer(&flush_timer, jiffies + 5); |
| 4410 | #endif |
| 4411 | |
| 4412 | #if defined(CONFIG_ETRAX_RS485) |
| 4413 | #if defined(CONFIG_ETRAX_RS485_ON_PA) |
WANG Cong | 2f7861d | 2011-09-01 13:58:29 +0800 | [diff] [blame] | 4414 | if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4415 | rs485_pa_bit)) { |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 4416 | printk(KERN_ERR "ETRAX100LX serial: Could not allocate " |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4417 | "RS485 pin\n"); |
Julia Lawall | 41ca732 | 2008-10-13 10:31:37 +0100 | [diff] [blame] | 4418 | put_tty_driver(driver); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4419 | return -EBUSY; |
| 4420 | } |
| 4421 | #endif |
| 4422 | #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) |
WANG Cong | 2f7861d | 2011-09-01 13:58:29 +0800 | [diff] [blame] | 4423 | if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit, |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4424 | rs485_port_g_bit)) { |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 4425 | printk(KERN_ERR "ETRAX100LX serial: Could not allocate " |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4426 | "RS485 pin\n"); |
Julia Lawall | 41ca732 | 2008-10-13 10:31:37 +0100 | [diff] [blame] | 4427 | put_tty_driver(driver); |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4428 | return -EBUSY; |
| 4429 | } |
| 4430 | #endif |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4431 | #endif |
| 4432 | |
| 4433 | /* Initialize the tty_driver structure */ |
| 4434 | |
| 4435 | driver->driver_name = "serial"; |
| 4436 | driver->name = "ttyS"; |
| 4437 | driver->major = TTY_MAJOR; |
| 4438 | driver->minor_start = 64; |
| 4439 | driver->type = TTY_DRIVER_TYPE_SERIAL; |
| 4440 | driver->subtype = SERIAL_TYPE_NORMAL; |
| 4441 | driver->init_termios = tty_std_termios; |
| 4442 | driver->init_termios.c_cflag = |
| 4443 | B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ |
Alan Cox | 606d099 | 2006-12-08 02:38:45 -0800 | [diff] [blame] | 4444 | driver->init_termios.c_ispeed = 115200; |
| 4445 | driver->init_termios.c_ospeed = 115200; |
Greg Kroah-Hartman | 331b831 | 2005-06-20 21:15:16 -0700 | [diff] [blame] | 4446 | driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4447 | |
| 4448 | tty_set_operations(driver, &rs_ops); |
| 4449 | serial_driver = driver; |
| 4450 | if (tty_register_driver(driver)) |
| 4451 | panic("Couldn't register serial driver\n"); |
| 4452 | /* do some initializing for the separate ports */ |
| 4453 | |
| 4454 | for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4455 | if (info->enabled) { |
| 4456 | if (cris_request_io_interface(info->io_if, |
| 4457 | info->io_if_description)) { |
WANG Cong | 3d43b7d | 2011-09-01 16:47:49 +0800 | [diff] [blame] | 4458 | printk(KERN_ERR "ETRAX100LX async serial: " |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4459 | "Could not allocate IO pins for " |
| 4460 | "%s, port %d\n", |
| 4461 | info->io_if_description, i); |
| 4462 | info->enabled = 0; |
| 4463 | } |
| 4464 | } |
Jiri Slaby | 953756e | 2012-04-02 13:53:46 +0200 | [diff] [blame] | 4465 | tty_port_init(&info->port); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4466 | info->uses_dma_in = 0; |
| 4467 | info->uses_dma_out = 0; |
| 4468 | info->line = i; |
Takashi Iwai | a88487c | 2008-07-16 21:54:42 +0100 | [diff] [blame] | 4469 | info->port.tty = NULL; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4470 | info->type = PORT_ETRAX; |
| 4471 | info->tr_running = 0; |
| 4472 | info->forced_eop = 0; |
| 4473 | info->baud_base = DEF_BAUD_BASE; |
| 4474 | info->custom_divisor = 0; |
| 4475 | info->flags = 0; |
| 4476 | info->close_delay = 5*HZ/10; |
| 4477 | info->closing_wait = 30*HZ; |
| 4478 | info->x_char = 0; |
| 4479 | info->event = 0; |
| 4480 | info->count = 0; |
| 4481 | info->blocked_open = 0; |
| 4482 | info->normal_termios = driver->init_termios; |
| 4483 | init_waitqueue_head(&info->open_wait); |
| 4484 | init_waitqueue_head(&info->close_wait); |
| 4485 | info->xmit.buf = NULL; |
| 4486 | info->xmit.tail = info->xmit.head = 0; |
| 4487 | info->first_recv_buffer = info->last_recv_buffer = NULL; |
| 4488 | info->recv_cnt = info->max_recv_cnt = 0; |
| 4489 | info->last_tx_active_usec = 0; |
| 4490 | info->last_tx_active = 0; |
| 4491 | |
| 4492 | #if defined(CONFIG_ETRAX_RS485) |
| 4493 | /* Set sane defaults */ |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 4494 | info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); |
| 4495 | info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4496 | info->rs485.delay_rts_before_send = 0; |
Claudio Scordino | 6fd1af4 | 2009-04-07 16:48:19 +0100 | [diff] [blame] | 4497 | info->rs485.flags &= ~(SER_RS485_ENABLED); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4498 | #endif |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4499 | INIT_WORK(&info->work, do_softint); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4500 | |
| 4501 | if (info->enabled) { |
Kulikov Vasiliy | 078dee2 | 2010-07-14 22:04:42 +0400 | [diff] [blame] | 4502 | printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", |
| 4503 | serial_driver->name, info->line, info->ioport); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4504 | } |
| 4505 | } |
| 4506 | #ifdef CONFIG_ETRAX_FAST_TIMER |
| 4507 | #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER |
| 4508 | memset(fast_timers, 0, sizeof(fast_timers)); |
| 4509 | #endif |
| 4510 | #ifdef CONFIG_ETRAX_RS485 |
| 4511 | memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); |
| 4512 | #endif |
| 4513 | fast_timer_init(); |
| 4514 | #endif |
| 4515 | |
| 4516 | #ifndef CONFIG_SVINTO_SIM |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4517 | #ifndef CONFIG_ETRAX_KGDB |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4518 | /* Not needed in simulator. May only complicate stuff. */ |
| 4519 | /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ |
| 4520 | |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4521 | if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, |
Yong Zhang | 9cfb5c0 | 2011-09-22 16:59:15 +0800 | [diff] [blame] | 4522 | IRQF_SHARED, "serial ", driver)) |
Harvey Harrison | 71cc2c2 | 2008-04-30 00:55:10 -0700 | [diff] [blame] | 4523 | panic("%s: Failed to request irq8", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4524 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4525 | #endif |
| 4526 | #endif /* CONFIG_SVINTO_SIM */ |
Jesper Nilsson | 77accbf | 2007-11-14 17:01:15 -0800 | [diff] [blame] | 4527 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4528 | return 0; |
| 4529 | } |
| 4530 | |
| 4531 | /* this makes sure that rs_init is called during kernel boot */ |
| 4532 | |
| 4533 | module_init(rs_init); |