Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 1 | /* |
| 2 | * AppliedMicro X-Gene SoC SATA Host Controller Driver |
| 3 | * |
| 4 | * Copyright (c) 2014, Applied Micro Circuits Corporation |
| 5 | * Author: Loc Ho <lho@apm.com> |
| 6 | * Tuan Phan <tphan@apm.com> |
| 7 | * Suman Tripathi <stripathi@apm.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify it |
| 10 | * under the terms of the GNU General Public License as published by the |
| 11 | * Free Software Foundation; either version 2 of the License, or (at your |
| 12 | * option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 21 | * |
| 22 | * NOTE: PM support is not currently available. |
| 23 | * |
| 24 | */ |
Feng Kan | 92b5bf9 | 2015-03-18 17:03:55 -0700 | [diff] [blame] | 25 | #include <linux/acpi.h> |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 26 | #include <linux/module.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/ahci_platform.h> |
| 29 | #include <linux/of_address.h> |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 30 | #include <linux/of_device.h> |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 31 | #include <linux/of_irq.h> |
| 32 | #include <linux/phy/phy.h> |
| 33 | #include "ahci.h" |
| 34 | |
Akinobu Mita | 018d5ef | 2015-01-29 08:30:29 +0900 | [diff] [blame] | 35 | #define DRV_NAME "xgene-ahci" |
| 36 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 37 | /* Max # of disk per a controller */ |
| 38 | #define MAX_AHCI_CHN_PERCTR 2 |
| 39 | |
| 40 | /* MUX CSR */ |
| 41 | #define SATA_ENET_CONFIG_REG 0x00000000 |
| 42 | #define CFG_SATA_ENET_SELECT_MASK 0x00000001 |
| 43 | |
| 44 | /* SATA core host controller CSR */ |
| 45 | #define SLVRDERRATTRIBUTES 0x00000000 |
| 46 | #define SLVWRERRATTRIBUTES 0x00000004 |
| 47 | #define MSTRDERRATTRIBUTES 0x00000008 |
| 48 | #define MSTWRERRATTRIBUTES 0x0000000c |
| 49 | #define BUSCTLREG 0x00000014 |
| 50 | #define IOFMSTRWAUX 0x00000018 |
| 51 | #define INTSTATUSMASK 0x0000002c |
| 52 | #define ERRINTSTATUS 0x00000030 |
| 53 | #define ERRINTSTATUSMASK 0x00000034 |
| 54 | |
| 55 | /* SATA host AHCI CSR */ |
| 56 | #define PORTCFG 0x000000a4 |
| 57 | #define PORTADDR_SET(dst, src) \ |
| 58 | (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) |
| 59 | #define PORTPHY1CFG 0x000000a8 |
| 60 | #define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ |
| 61 | (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) |
| 62 | #define PORTPHY2CFG 0x000000ac |
| 63 | #define PORTPHY3CFG 0x000000b0 |
| 64 | #define PORTPHY4CFG 0x000000b4 |
| 65 | #define PORTPHY5CFG 0x000000b8 |
| 66 | #define SCTL0 0x0000012C |
| 67 | #define PORTPHY5CFG_RTCHG_SET(dst, src) \ |
| 68 | (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) |
| 69 | #define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ |
| 70 | (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) |
| 71 | #define PORTAXICFG 0x000000bc |
| 72 | #define PORTAXICFG_OUTTRANS_SET(dst, src) \ |
| 73 | (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) |
Suman Tripathi | aeae4dc | 2014-07-29 12:24:49 +0530 | [diff] [blame] | 74 | #define PORTRANSCFG 0x000000c8 |
| 75 | #define PORTRANSCFG_RXWM_SET(dst, src) \ |
| 76 | (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 77 | |
| 78 | /* SATA host controller AXI CSR */ |
| 79 | #define INT_SLV_TMOMASK 0x00000010 |
| 80 | |
| 81 | /* SATA diagnostic CSR */ |
| 82 | #define CFG_MEM_RAM_SHUTDOWN 0x00000070 |
| 83 | #define BLOCK_MEM_RDY 0x00000074 |
| 84 | |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 85 | /* Max retry for link down */ |
| 86 | #define MAX_LINK_DOWN_RETRY 3 |
| 87 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 88 | enum xgene_ahci_version { |
| 89 | XGENE_AHCI_V1 = 1, |
| 90 | XGENE_AHCI_V2, |
| 91 | }; |
| 92 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 93 | struct xgene_ahci_context { |
| 94 | struct ahci_host_priv *hpriv; |
| 95 | struct device *dev; |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 96 | u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ |
Suman Tripathi | a3a84bc | 2015-01-06 15:32:16 +0530 | [diff] [blame] | 97 | u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 98 | void __iomem *csr_core; /* Core CSR address of IP */ |
| 99 | void __iomem *csr_diag; /* Diag CSR address of IP */ |
| 100 | void __iomem *csr_axi; /* AXI CSR address of IP */ |
| 101 | void __iomem *csr_mux; /* MUX CSR address of IP */ |
| 102 | }; |
| 103 | |
| 104 | static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) |
| 105 | { |
| 106 | dev_dbg(ctx->dev, "Release memory from shutdown\n"); |
| 107 | writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); |
| 108 | readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ |
| 109 | msleep(1); /* reset may take up to 1ms */ |
| 110 | if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { |
| 111 | dev_err(ctx->dev, "failed to release memory from shutdown\n"); |
| 112 | return -ENODEV; |
| 113 | } |
| 114 | return 0; |
| 115 | } |
| 116 | |
| 117 | /** |
Suman Tripathi | 1540035 | 2015-01-06 15:32:15 +0530 | [diff] [blame] | 118 | * xgene_ahci_poll_reg_val- Poll a register on a specific value. |
| 119 | * @ap : ATA port of interest. |
| 120 | * @reg : Register of interest. |
| 121 | * @val : Value to be attained. |
| 122 | * @interval : waiting interval for polling. |
| 123 | * @timeout : timeout for achieving the value. |
| 124 | */ |
| 125 | static int xgene_ahci_poll_reg_val(struct ata_port *ap, |
| 126 | void __iomem *reg, unsigned |
| 127 | int val, unsigned long interval, |
| 128 | unsigned long timeout) |
| 129 | { |
| 130 | unsigned long deadline; |
| 131 | unsigned int tmp; |
| 132 | |
| 133 | tmp = ioread32(reg); |
| 134 | deadline = ata_deadline(jiffies, timeout); |
| 135 | |
| 136 | while (tmp != val && time_before(jiffies, deadline)) { |
| 137 | ata_msleep(ap, interval); |
| 138 | tmp = ioread32(reg); |
| 139 | } |
| 140 | |
| 141 | return tmp; |
| 142 | } |
| 143 | |
| 144 | /** |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 145 | * xgene_ahci_restart_engine - Restart the dma engine. |
| 146 | * @ap : ATA port of interest |
| 147 | * |
Suman Tripathi | 1540035 | 2015-01-06 15:32:15 +0530 | [diff] [blame] | 148 | * Waits for completion of multiple commands and restarts |
| 149 | * the DMA engine inside the controller. |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 150 | */ |
| 151 | static int xgene_ahci_restart_engine(struct ata_port *ap) |
| 152 | { |
| 153 | struct ahci_host_priv *hpriv = ap->host->private_data; |
Suman Tripathi | 1540035 | 2015-01-06 15:32:15 +0530 | [diff] [blame] | 154 | struct ahci_port_priv *pp = ap->private_data; |
| 155 | void __iomem *port_mmio = ahci_port_base(ap); |
| 156 | u32 fbs; |
| 157 | |
| 158 | /* |
| 159 | * In case of PMP multiple IDENTIFY DEVICE commands can be |
| 160 | * issued inside PxCI. So need to poll PxCI for the |
| 161 | * completion of outstanding IDENTIFY DEVICE commands before |
| 162 | * we restart the DMA engine. |
| 163 | */ |
| 164 | if (xgene_ahci_poll_reg_val(ap, port_mmio + |
| 165 | PORT_CMD_ISSUE, 0x0, 1, 100)) |
| 166 | return -EBUSY; |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 167 | |
| 168 | ahci_stop_engine(ap); |
| 169 | ahci_start_fis_rx(ap); |
Suman Tripathi | 1540035 | 2015-01-06 15:32:15 +0530 | [diff] [blame] | 170 | |
| 171 | /* |
| 172 | * Enable the PxFBS.FBS_EN bit as it |
| 173 | * gets cleared due to stopping the engine. |
| 174 | */ |
| 175 | if (pp->fbs_supported) { |
| 176 | fbs = readl(port_mmio + PORT_FBS); |
| 177 | writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); |
| 178 | fbs = readl(port_mmio + PORT_FBS); |
| 179 | } |
| 180 | |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 181 | hpriv->start_engine(ap); |
| 182 | |
| 183 | return 0; |
| 184 | } |
| 185 | |
| 186 | /** |
| 187 | * xgene_ahci_qc_issue - Issue commands to the device |
| 188 | * @qc: Command to issue |
| 189 | * |
Suman Tripathi | a3a84bc | 2015-01-06 15:32:16 +0530 | [diff] [blame] | 190 | * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot |
| 191 | * clear the BSY bit after receiving the PIO setup FIS. This results in the dma |
| 192 | * state machine goes into the CMFatalErrorUpdate state and locks up. By |
| 193 | * restarting the dma engine, it removes the controller out of lock up state. |
| 194 | * |
| 195 | * Due to H/W errata, the controller is unable to save the PMP |
| 196 | * field fetched from command header before sending the H2D FIS. |
| 197 | * When the device returns the PMP port field in the D2H FIS, there is |
| 198 | * a mismatch and results in command completion failure. The |
| 199 | * workaround is to write the pmp value to PxFBS.DEV field before issuing |
| 200 | * any command to PMP. |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 201 | */ |
| 202 | static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) |
| 203 | { |
| 204 | struct ata_port *ap = qc->ap; |
| 205 | struct ahci_host_priv *hpriv = ap->host->private_data; |
| 206 | struct xgene_ahci_context *ctx = hpriv->plat_data; |
| 207 | int rc = 0; |
Suman Tripathi | a3a84bc | 2015-01-06 15:32:16 +0530 | [diff] [blame] | 208 | u32 port_fbs; |
| 209 | void *port_mmio = ahci_port_base(ap); |
| 210 | |
| 211 | /* |
| 212 | * Write the pmp value to PxFBS.DEV |
| 213 | * for case of Port Mulitplier. |
| 214 | */ |
| 215 | if (ctx->class[ap->port_no] == ATA_DEV_PMP) { |
| 216 | port_fbs = readl(port_mmio + PORT_FBS); |
| 217 | port_fbs &= ~PORT_FBS_DEV_MASK; |
| 218 | port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; |
| 219 | writel(port_fbs, port_mmio + PORT_FBS); |
| 220 | } |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 221 | |
Suman Tripathi | 1102407 | 2014-12-29 08:52:47 +0530 | [diff] [blame] | 222 | if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || |
Suman Tripathi | 09c32aa | 2015-02-02 23:37:19 +0530 | [diff] [blame] | 223 | (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || |
| 224 | (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 225 | xgene_ahci_restart_engine(ap); |
| 226 | |
| 227 | rc = ahci_qc_issue(qc); |
| 228 | |
| 229 | /* Save the last command issued */ |
| 230 | ctx->last_cmd[ap->port_no] = qc->tf.command; |
| 231 | |
| 232 | return rc; |
| 233 | } |
| 234 | |
Suman Tripathi | 0bed13b | 2014-08-28 14:51:21 +0530 | [diff] [blame] | 235 | static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) |
| 236 | { |
| 237 | void __iomem *diagcsr = ctx->csr_diag; |
| 238 | |
| 239 | return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && |
| 240 | readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); |
| 241 | } |
| 242 | |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 243 | /** |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 244 | * xgene_ahci_read_id - Read ID data from the specified device |
| 245 | * @dev: device |
| 246 | * @tf: proposed taskfile |
| 247 | * @id: data buffer |
| 248 | * |
| 249 | * This custom read ID function is required due to the fact that the HW |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 250 | * does not support DEVSLP. |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 251 | */ |
| 252 | static unsigned int xgene_ahci_read_id(struct ata_device *dev, |
| 253 | struct ata_taskfile *tf, u16 *id) |
| 254 | { |
| 255 | u32 err_mask; |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 256 | |
| 257 | err_mask = ata_do_dev_read_id(dev, tf, id); |
| 258 | if (err_mask) |
| 259 | return err_mask; |
| 260 | |
| 261 | /* |
| 262 | * Mask reserved area. Word78 spec of Link Power Management |
| 263 | * bit15-8: reserved |
| 264 | * bit7: NCQ autosence |
| 265 | * bit6: Software settings preservation supported |
| 266 | * bit5: reserved |
| 267 | * bit4: In-order sata delivery supported |
| 268 | * bit3: DIPM requests supported |
| 269 | * bit2: DMA Setup FIS Auto-Activate optimization supported |
| 270 | * bit1: DMA Setup FIX non-Zero buffer offsets supported |
| 271 | * bit0: Reserved |
| 272 | * |
| 273 | * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP |
| 274 | */ |
Suman Tripathi | 5c0b8e0 | 2014-12-29 08:52:46 +0530 | [diff] [blame] | 275 | id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 276 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 277 | return 0; |
| 278 | } |
| 279 | |
| 280 | static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) |
| 281 | { |
| 282 | void __iomem *mmio = ctx->hpriv->mmio; |
| 283 | u32 val; |
| 284 | |
| 285 | dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", |
| 286 | mmio, channel); |
| 287 | val = readl(mmio + PORTCFG); |
| 288 | val = PORTADDR_SET(val, channel == 0 ? 2 : 3); |
| 289 | writel(val, mmio + PORTCFG); |
| 290 | readl(mmio + PORTCFG); /* Force a barrier */ |
| 291 | /* Disable fix rate */ |
| 292 | writel(0x0001fffe, mmio + PORTPHY1CFG); |
| 293 | readl(mmio + PORTPHY1CFG); /* Force a barrier */ |
Suman Tripathi | 0185b1b | 2014-07-29 12:24:51 +0530 | [diff] [blame] | 294 | writel(0x28183219, mmio + PORTPHY2CFG); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 295 | readl(mmio + PORTPHY2CFG); /* Force a barrier */ |
Suman Tripathi | 0185b1b | 2014-07-29 12:24:51 +0530 | [diff] [blame] | 296 | writel(0x13081008, mmio + PORTPHY3CFG); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 297 | readl(mmio + PORTPHY3CFG); /* Force a barrier */ |
Suman Tripathi | 0185b1b | 2014-07-29 12:24:51 +0530 | [diff] [blame] | 298 | writel(0x00480815, mmio + PORTPHY4CFG); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 299 | readl(mmio + PORTPHY4CFG); /* Force a barrier */ |
| 300 | /* Set window negotiation */ |
| 301 | val = readl(mmio + PORTPHY5CFG); |
| 302 | val = PORTPHY5CFG_RTCHG_SET(val, 0x300); |
| 303 | writel(val, mmio + PORTPHY5CFG); |
| 304 | readl(mmio + PORTPHY5CFG); /* Force a barrier */ |
| 305 | val = readl(mmio + PORTAXICFG); |
| 306 | val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ |
| 307 | val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ |
| 308 | writel(val, mmio + PORTAXICFG); |
| 309 | readl(mmio + PORTAXICFG); /* Force a barrier */ |
Suman Tripathi | aeae4dc | 2014-07-29 12:24:49 +0530 | [diff] [blame] | 310 | /* Set the watermark threshold of the receive FIFO */ |
| 311 | val = readl(mmio + PORTRANSCFG); |
| 312 | val = PORTRANSCFG_RXWM_SET(val, 0x30); |
| 313 | writel(val, mmio + PORTRANSCFG); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 314 | } |
| 315 | |
| 316 | /** |
| 317 | * xgene_ahci_do_hardreset - Issue the actual COMRESET |
| 318 | * @link: link to reset |
| 319 | * @deadline: deadline jiffies for the operation |
| 320 | * @online: Return value to indicate if device online |
| 321 | * |
| 322 | * Due to the limitation of the hardware PHY, a difference set of setting is |
| 323 | * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), |
| 324 | * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will |
| 325 | * report disparity error and etc. In addition, during COMRESET, there can |
| 326 | * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 327 | * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long |
| 328 | * reboot cycle regression, sometimes the PHY reports link down even if the |
| 329 | * device is present because of speed negotiation failure. so need to retry |
| 330 | * the COMRESET to get the link up. The following algorithm is followed to |
| 331 | * proper configure the hardware PHY during COMRESET: |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 332 | * |
| 333 | * Alg Part 1: |
| 334 | * 1. Start the PHY at Gen3 speed (default setting) |
| 335 | * 2. Issue the COMRESET |
| 336 | * 3. If no link, go to Alg Part 3 |
| 337 | * 4. If link up, determine if the negotiated speed matches the PHY |
| 338 | * configured speed |
| 339 | * 5. If they matched, go to Alg Part 2 |
| 340 | * 6. If they do not matched and first time, configure the PHY for the linked |
| 341 | * up disk speed and repeat step 2 |
| 342 | * 7. Go to Alg Part 2 |
| 343 | * |
| 344 | * Alg Part 2: |
| 345 | * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error |
| 346 | * reported in the register PORT_SCR_ERR, then reset the PHY receiver line |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 347 | * 2. Go to Alg Part 4 |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 348 | * |
| 349 | * Alg Part 3: |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 350 | * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY |
| 351 | * communication establishment failed and maximum link down attempts are |
| 352 | * less than Max attempts 3 then goto Alg Part 1. |
| 353 | * 2. Go to Alg Part 4. |
| 354 | * |
| 355 | * Alg Part 4: |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 356 | * 1. Clear any pending from register PORT_SCR_ERR. |
| 357 | * |
| 358 | * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition |
| 359 | * and until the underlying PHY supports an method to reset the receiver |
| 360 | * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, |
| 361 | * an warning message will be printed. |
| 362 | */ |
| 363 | static int xgene_ahci_do_hardreset(struct ata_link *link, |
| 364 | unsigned long deadline, bool *online) |
| 365 | { |
| 366 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); |
| 367 | struct ata_port *ap = link->ap; |
| 368 | struct ahci_host_priv *hpriv = ap->host->private_data; |
| 369 | struct xgene_ahci_context *ctx = hpriv->plat_data; |
| 370 | struct ahci_port_priv *pp = ap->private_data; |
| 371 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
| 372 | void __iomem *port_mmio = ahci_port_base(ap); |
| 373 | struct ata_taskfile tf; |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 374 | int link_down_retry = 0; |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 375 | int rc; |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 376 | u32 val, sstatus; |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 377 | |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 378 | do { |
| 379 | /* clear D2H reception area to properly wait for D2H FIS */ |
| 380 | ata_tf_init(link->device, &tf); |
| 381 | tf.command = ATA_BUSY; |
| 382 | ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
| 383 | rc = sata_link_hardreset(link, timing, deadline, online, |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 384 | ahci_check_ready); |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 385 | if (*online) { |
| 386 | val = readl(port_mmio + PORT_SCR_ERR); |
| 387 | if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) |
| 388 | dev_warn(ctx->dev, "link has error\n"); |
| 389 | break; |
| 390 | } |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 391 | |
Suman Tripathi | 0babe61 | 2014-08-28 14:51:22 +0530 | [diff] [blame] | 392 | sata_scr_read(link, SCR_STATUS, &sstatus); |
| 393 | } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && |
| 394 | (sstatus & 0xff) == 0x1); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 395 | |
| 396 | /* clear all errors if any pending */ |
| 397 | val = readl(port_mmio + PORT_SCR_ERR); |
| 398 | writel(val, port_mmio + PORT_SCR_ERR); |
| 399 | |
| 400 | return rc; |
| 401 | } |
| 402 | |
| 403 | static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, |
| 404 | unsigned long deadline) |
| 405 | { |
| 406 | struct ata_port *ap = link->ap; |
| 407 | struct ahci_host_priv *hpriv = ap->host->private_data; |
| 408 | void __iomem *port_mmio = ahci_port_base(ap); |
| 409 | bool online; |
| 410 | int rc; |
| 411 | u32 portcmd_saved; |
| 412 | u32 portclb_saved; |
| 413 | u32 portclbhi_saved; |
| 414 | u32 portrxfis_saved; |
| 415 | u32 portrxfishi_saved; |
| 416 | |
| 417 | /* As hardreset resets these CSR, save it to restore later */ |
| 418 | portcmd_saved = readl(port_mmio + PORT_CMD); |
| 419 | portclb_saved = readl(port_mmio + PORT_LST_ADDR); |
| 420 | portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); |
| 421 | portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); |
| 422 | portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); |
| 423 | |
| 424 | ahci_stop_engine(ap); |
| 425 | |
| 426 | rc = xgene_ahci_do_hardreset(link, deadline, &online); |
| 427 | |
| 428 | /* As controller hardreset clears them, restore them */ |
| 429 | writel(portcmd_saved, port_mmio + PORT_CMD); |
| 430 | writel(portclb_saved, port_mmio + PORT_LST_ADDR); |
| 431 | writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); |
| 432 | writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); |
| 433 | writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); |
| 434 | |
| 435 | hpriv->start_engine(ap); |
| 436 | |
| 437 | if (online) |
| 438 | *class = ahci_dev_classify(ap); |
| 439 | |
| 440 | return rc; |
| 441 | } |
| 442 | |
| 443 | static void xgene_ahci_host_stop(struct ata_host *host) |
| 444 | { |
| 445 | struct ahci_host_priv *hpriv = host->private_data; |
| 446 | |
| 447 | ahci_platform_disable_resources(hpriv); |
| 448 | } |
| 449 | |
Suman Tripathi | a3a84bc | 2015-01-06 15:32:16 +0530 | [diff] [blame] | 450 | /** |
| 451 | * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected |
| 452 | * to Port Multiplier. |
| 453 | * @link: link to reset |
| 454 | * @class: Return value to indicate class of device |
| 455 | * @deadline: deadline jiffies for the operation |
| 456 | * |
| 457 | * Due to H/W errata, the controller is unable to save the PMP |
| 458 | * field fetched from command header before sending the H2D FIS. |
| 459 | * When the device returns the PMP port field in the D2H FIS, there is |
| 460 | * a mismatch and results in command completion failure. The workaround |
| 461 | * is to write the pmp value to PxFBS.DEV field before issuing any command |
| 462 | * to PMP. |
| 463 | */ |
| 464 | static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, |
| 465 | unsigned long deadline) |
| 466 | { |
| 467 | int pmp = sata_srst_pmp(link); |
| 468 | struct ata_port *ap = link->ap; |
| 469 | u32 rc; |
| 470 | void *port_mmio = ahci_port_base(ap); |
| 471 | u32 port_fbs; |
| 472 | |
| 473 | /* |
| 474 | * Set PxFBS.DEV field with pmp |
| 475 | * value. |
| 476 | */ |
| 477 | port_fbs = readl(port_mmio + PORT_FBS); |
| 478 | port_fbs &= ~PORT_FBS_DEV_MASK; |
| 479 | port_fbs |= pmp << PORT_FBS_DEV_OFFSET; |
| 480 | writel(port_fbs, port_mmio + PORT_FBS); |
| 481 | |
| 482 | rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); |
| 483 | |
| 484 | return rc; |
| 485 | } |
| 486 | |
| 487 | /** |
| 488 | * xgene_ahci_softreset - Issue the softreset to the drive. |
| 489 | * @link: link to reset |
| 490 | * @class: Return value to indicate class of device |
| 491 | * @deadline: deadline jiffies for the operation |
| 492 | * |
| 493 | * Due to H/W errata, the controller is unable to save the PMP |
| 494 | * field fetched from command header before sending the H2D FIS. |
| 495 | * When the device returns the PMP port field in the D2H FIS, there is |
| 496 | * a mismatch and results in command completion failure. The workaround |
| 497 | * is to write the pmp value to PxFBS.DEV field before issuing any command |
| 498 | * to PMP. Here is the algorithm to detect PMP : |
| 499 | * |
| 500 | * 1. Save the PxFBS value |
| 501 | * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends |
| 502 | * 0xF for both PMP/NON-PMP initially |
| 503 | * 3. Issue softreset |
| 504 | * 4. If signature class is PMP goto 6 |
| 505 | * 5. restore the original PxFBS and goto 3 |
| 506 | * 6. return |
| 507 | */ |
| 508 | static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, |
| 509 | unsigned long deadline) |
| 510 | { |
| 511 | int pmp = sata_srst_pmp(link); |
| 512 | struct ata_port *ap = link->ap; |
| 513 | struct ahci_host_priv *hpriv = ap->host->private_data; |
| 514 | struct xgene_ahci_context *ctx = hpriv->plat_data; |
| 515 | void *port_mmio = ahci_port_base(ap); |
| 516 | u32 port_fbs; |
| 517 | u32 port_fbs_save; |
| 518 | u32 retry = 1; |
| 519 | u32 rc; |
| 520 | |
| 521 | port_fbs_save = readl(port_mmio + PORT_FBS); |
| 522 | |
| 523 | /* |
| 524 | * Set PxFBS.DEV field with pmp |
| 525 | * value. |
| 526 | */ |
| 527 | port_fbs = readl(port_mmio + PORT_FBS); |
| 528 | port_fbs &= ~PORT_FBS_DEV_MASK; |
| 529 | port_fbs |= pmp << PORT_FBS_DEV_OFFSET; |
| 530 | writel(port_fbs, port_mmio + PORT_FBS); |
| 531 | |
| 532 | softreset_retry: |
| 533 | rc = ahci_do_softreset(link, class, pmp, |
| 534 | deadline, ahci_check_ready); |
| 535 | |
| 536 | ctx->class[ap->port_no] = *class; |
| 537 | if (*class != ATA_DEV_PMP) { |
| 538 | /* |
| 539 | * Retry for normal drives without |
| 540 | * setting PxFBS.DEV field with pmp value. |
| 541 | */ |
| 542 | if (retry--) { |
| 543 | writel(port_fbs_save, port_mmio + PORT_FBS); |
| 544 | goto softreset_retry; |
| 545 | } |
| 546 | } |
| 547 | |
| 548 | return rc; |
| 549 | } |
| 550 | |
Suman Tripathi | 32aea26 | 2016-02-06 11:25:24 +0530 | [diff] [blame] | 551 | /** |
| 552 | * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. |
| 553 | * @ata_host: Host that recieved the irq |
| 554 | * @irq_masked: HOST_IRQ_STAT value |
| 555 | * |
| 556 | * For hardware with broken edge trigger latch |
| 557 | * the HOST_IRQ_STAT register misses the edge interrupt |
| 558 | * when clearing of HOST_IRQ_STAT register and hardware |
| 559 | * reporting the PORT_IRQ_STAT register at the |
| 560 | * same clock cycle. |
| 561 | * As such, the algorithm below outlines the workaround. |
| 562 | * |
| 563 | * 1. Read HOST_IRQ_STAT register and save the state. |
| 564 | * 2. Clear the HOST_IRQ_STAT register. |
| 565 | * 3. Read back the HOST_IRQ_STAT register. |
| 566 | * 4. If HOST_IRQ_STAT register equals to zero, then |
| 567 | * traverse the rest of port's PORT_IRQ_STAT register |
| 568 | * to check if an interrupt is triggered at that point else |
| 569 | * go to step 6. |
| 570 | * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero |
| 571 | * then update the state of HOST_IRQ_STAT saved in step 1. |
| 572 | * 6. Handle port interrupts. |
| 573 | * 7. Exit |
| 574 | */ |
| 575 | static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, |
| 576 | u32 irq_masked) |
| 577 | { |
| 578 | struct ahci_host_priv *hpriv = host->private_data; |
| 579 | void __iomem *port_mmio; |
| 580 | int i; |
| 581 | |
| 582 | if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { |
| 583 | for (i = 0; i < host->n_ports; i++) { |
| 584 | if (irq_masked & (1 << i)) |
| 585 | continue; |
| 586 | |
| 587 | port_mmio = ahci_port_base(host->ports[i]); |
| 588 | if (readl(port_mmio + PORT_IRQ_STAT)) |
| 589 | irq_masked |= (1 << i); |
| 590 | } |
| 591 | } |
| 592 | |
| 593 | return ahci_handle_port_intr(host, irq_masked); |
| 594 | } |
| 595 | |
Suman Tripathi | d867b95 | 2016-02-06 11:25:23 +0530 | [diff] [blame] | 596 | static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) |
| 597 | { |
| 598 | struct ata_host *host = dev_instance; |
| 599 | struct ahci_host_priv *hpriv; |
| 600 | unsigned int rc = 0; |
| 601 | void __iomem *mmio; |
| 602 | u32 irq_stat, irq_masked; |
| 603 | |
| 604 | VPRINTK("ENTER\n"); |
| 605 | |
| 606 | hpriv = host->private_data; |
| 607 | mmio = hpriv->mmio; |
| 608 | |
| 609 | /* sigh. 0xffffffff is a valid return from h/w */ |
| 610 | irq_stat = readl(mmio + HOST_IRQ_STAT); |
| 611 | if (!irq_stat) |
| 612 | return IRQ_NONE; |
| 613 | |
| 614 | irq_masked = irq_stat & hpriv->port_map; |
| 615 | |
| 616 | spin_lock(&host->lock); |
| 617 | |
| 618 | /* |
| 619 | * HOST_IRQ_STAT behaves as edge triggered latch meaning that |
| 620 | * it should be cleared before all the port events are cleared. |
| 621 | */ |
| 622 | writel(irq_stat, mmio + HOST_IRQ_STAT); |
| 623 | |
Suman Tripathi | 32aea26 | 2016-02-06 11:25:24 +0530 | [diff] [blame] | 624 | rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); |
Suman Tripathi | d867b95 | 2016-02-06 11:25:23 +0530 | [diff] [blame] | 625 | |
| 626 | spin_unlock(&host->lock); |
| 627 | |
| 628 | VPRINTK("EXIT\n"); |
| 629 | |
| 630 | return IRQ_RETVAL(rc); |
| 631 | } |
| 632 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 633 | static struct ata_port_operations xgene_ahci_v1_ops = { |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 634 | .inherits = &ahci_ops, |
| 635 | .host_stop = xgene_ahci_host_stop, |
| 636 | .hardreset = xgene_ahci_hardreset, |
| 637 | .read_id = xgene_ahci_read_id, |
Suman Tripathi | 2a0bdff | 2014-07-07 22:33:05 +0530 | [diff] [blame] | 638 | .qc_issue = xgene_ahci_qc_issue, |
Suman Tripathi | a3a84bc | 2015-01-06 15:32:16 +0530 | [diff] [blame] | 639 | .softreset = xgene_ahci_softreset, |
| 640 | .pmp_softreset = xgene_ahci_pmp_softreset |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 641 | }; |
| 642 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 643 | static const struct ata_port_info xgene_ahci_v1_port_info = { |
Suman Tripathi | 1540035 | 2015-01-06 15:32:15 +0530 | [diff] [blame] | 644 | .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 645 | .pio_mask = ATA_PIO4, |
| 646 | .udma_mask = ATA_UDMA6, |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 647 | .port_ops = &xgene_ahci_v1_ops, |
| 648 | }; |
| 649 | |
| 650 | static struct ata_port_operations xgene_ahci_v2_ops = { |
| 651 | .inherits = &ahci_ops, |
| 652 | .host_stop = xgene_ahci_host_stop, |
| 653 | .hardreset = xgene_ahci_hardreset, |
| 654 | .read_id = xgene_ahci_read_id, |
| 655 | }; |
| 656 | |
| 657 | static const struct ata_port_info xgene_ahci_v2_port_info = { |
| 658 | .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, |
| 659 | .pio_mask = ATA_PIO4, |
| 660 | .udma_mask = ATA_UDMA6, |
| 661 | .port_ops = &xgene_ahci_v2_ops, |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 662 | }; |
| 663 | |
| 664 | static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) |
| 665 | { |
| 666 | struct xgene_ahci_context *ctx = hpriv->plat_data; |
| 667 | int i; |
| 668 | int rc; |
| 669 | u32 val; |
| 670 | |
| 671 | /* Remove IP RAM out of shutdown */ |
| 672 | rc = xgene_ahci_init_memram(ctx); |
| 673 | if (rc) |
| 674 | return rc; |
| 675 | |
| 676 | for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) |
| 677 | xgene_ahci_set_phy_cfg(ctx, i); |
| 678 | |
| 679 | /* AXI disable Mask */ |
| 680 | writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); |
| 681 | readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ |
| 682 | writel(0, ctx->csr_core + INTSTATUSMASK); |
Loc Ho | 6a96918 | 2014-03-18 12:14:37 -0600 | [diff] [blame] | 683 | val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 684 | dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", |
| 685 | INTSTATUSMASK, val); |
| 686 | |
| 687 | writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); |
| 688 | readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ |
| 689 | writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); |
| 690 | readl(ctx->csr_axi + INT_SLV_TMOMASK); |
| 691 | |
| 692 | /* Enable AXI Interrupt */ |
| 693 | writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); |
| 694 | writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); |
| 695 | writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); |
| 696 | writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); |
| 697 | |
| 698 | /* Enable coherency */ |
| 699 | val = readl(ctx->csr_core + BUSCTLREG); |
| 700 | val &= ~0x00000002; /* Enable write coherency */ |
| 701 | val &= ~0x00000001; /* Enable read coherency */ |
| 702 | writel(val, ctx->csr_core + BUSCTLREG); |
| 703 | |
| 704 | val = readl(ctx->csr_core + IOFMSTRWAUX); |
| 705 | val |= (1 << 3); /* Enable read coherency */ |
| 706 | val |= (1 << 9); /* Enable write coherency */ |
| 707 | writel(val, ctx->csr_core + IOFMSTRWAUX); |
| 708 | val = readl(ctx->csr_core + IOFMSTRWAUX); |
| 709 | dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", |
| 710 | IOFMSTRWAUX, val); |
| 711 | |
| 712 | return rc; |
| 713 | } |
| 714 | |
| 715 | static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) |
| 716 | { |
| 717 | u32 val; |
| 718 | |
| 719 | /* Check for optional MUX resource */ |
Suman Tripathi | a77b6ee | 2014-09-22 18:31:33 +0530 | [diff] [blame] | 720 | if (!ctx->csr_mux) |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 721 | return 0; |
| 722 | |
| 723 | val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); |
| 724 | val &= ~CFG_SATA_ENET_SELECT_MASK; |
| 725 | writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); |
| 726 | val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); |
| 727 | return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; |
| 728 | } |
| 729 | |
Akinobu Mita | 018d5ef | 2015-01-29 08:30:29 +0900 | [diff] [blame] | 730 | static struct scsi_host_template ahci_platform_sht = { |
| 731 | AHCI_SHT(DRV_NAME), |
| 732 | }; |
| 733 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 734 | #ifdef CONFIG_ACPI |
| 735 | static const struct acpi_device_id xgene_ahci_acpi_match[] = { |
| 736 | { "APMC0D0D", XGENE_AHCI_V1}, |
| 737 | { "APMC0D32", XGENE_AHCI_V2}, |
| 738 | {}, |
| 739 | }; |
| 740 | MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); |
| 741 | #endif |
| 742 | |
| 743 | static const struct of_device_id xgene_ahci_of_match[] = { |
| 744 | {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, |
| 745 | {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, |
| 746 | {}, |
| 747 | }; |
| 748 | MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); |
| 749 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 750 | static int xgene_ahci_probe(struct platform_device *pdev) |
| 751 | { |
| 752 | struct device *dev = &pdev->dev; |
| 753 | struct ahci_host_priv *hpriv; |
| 754 | struct xgene_ahci_context *ctx; |
| 755 | struct resource *res; |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 756 | const struct of_device_id *of_devid; |
| 757 | enum xgene_ahci_version version = XGENE_AHCI_V1; |
| 758 | const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, |
| 759 | &xgene_ahci_v2_port_info }; |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 760 | int rc; |
| 761 | |
| 762 | hpriv = ahci_platform_get_resources(pdev); |
| 763 | if (IS_ERR(hpriv)) |
| 764 | return PTR_ERR(hpriv); |
| 765 | |
| 766 | ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| 767 | if (!ctx) |
| 768 | return -ENOMEM; |
| 769 | |
| 770 | hpriv->plat_data = ctx; |
| 771 | ctx->hpriv = hpriv; |
| 772 | ctx->dev = dev; |
| 773 | |
| 774 | /* Retrieve the IP core resource */ |
| 775 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| 776 | ctx->csr_core = devm_ioremap_resource(dev, res); |
| 777 | if (IS_ERR(ctx->csr_core)) |
| 778 | return PTR_ERR(ctx->csr_core); |
| 779 | |
| 780 | /* Retrieve the IP diagnostic resource */ |
| 781 | res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| 782 | ctx->csr_diag = devm_ioremap_resource(dev, res); |
| 783 | if (IS_ERR(ctx->csr_diag)) |
| 784 | return PTR_ERR(ctx->csr_diag); |
| 785 | |
| 786 | /* Retrieve the IP AXI resource */ |
| 787 | res = platform_get_resource(pdev, IORESOURCE_MEM, 3); |
| 788 | ctx->csr_axi = devm_ioremap_resource(dev, res); |
| 789 | if (IS_ERR(ctx->csr_axi)) |
| 790 | return PTR_ERR(ctx->csr_axi); |
| 791 | |
| 792 | /* Retrieve the optional IP mux resource */ |
| 793 | res = platform_get_resource(pdev, IORESOURCE_MEM, 4); |
Suman Tripathi | a77b6ee | 2014-09-22 18:31:33 +0530 | [diff] [blame] | 794 | if (res) { |
| 795 | void __iomem *csr = devm_ioremap_resource(dev, res); |
| 796 | if (IS_ERR(csr)) |
| 797 | return PTR_ERR(csr); |
| 798 | |
| 799 | ctx->csr_mux = csr; |
| 800 | } |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 801 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 802 | of_devid = of_match_device(xgene_ahci_of_match, dev); |
| 803 | if (of_devid) { |
| 804 | if (of_devid->data) |
| 805 | version = (enum xgene_ahci_version) of_devid->data; |
| 806 | } |
| 807 | #ifdef CONFIG_ACPI |
| 808 | else { |
| 809 | const struct acpi_device_id *acpi_id; |
| 810 | struct acpi_device_info *info; |
| 811 | acpi_status status; |
| 812 | |
| 813 | acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); |
| 814 | if (!acpi_id) { |
| 815 | dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); |
| 816 | version = XGENE_AHCI_V1; |
Dan Carpenter | 2d32d10 | 2015-05-15 12:24:15 +0300 | [diff] [blame] | 817 | } else if (acpi_id->driver_data) { |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 818 | version = (enum xgene_ahci_version) acpi_id->driver_data; |
| 819 | status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); |
| 820 | if (ACPI_FAILURE(status)) { |
| 821 | dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", |
| 822 | __func__); |
| 823 | version = XGENE_AHCI_V1; |
Dan Carpenter | 8134233 | 2016-03-10 10:45:32 +0300 | [diff] [blame] | 824 | } else if (info->valid & ACPI_VALID_CID) { |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 825 | version = XGENE_AHCI_V2; |
Dan Carpenter | 8134233 | 2016-03-10 10:45:32 +0300 | [diff] [blame] | 826 | } |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 827 | } |
| 828 | } |
| 829 | #endif |
| 830 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 831 | dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, |
| 832 | hpriv->mmio); |
| 833 | |
| 834 | /* Select ATA */ |
| 835 | if ((rc = xgene_ahci_mux_select(ctx))) { |
| 836 | dev_err(dev, "SATA mux selection failed error %d\n", rc); |
| 837 | return -ENODEV; |
| 838 | } |
| 839 | |
Suman Tripathi | 0bed13b | 2014-08-28 14:51:21 +0530 | [diff] [blame] | 840 | if (xgene_ahci_is_memram_inited(ctx)) { |
| 841 | dev_info(dev, "skip clock and PHY initialization\n"); |
| 842 | goto skip_clk_phy; |
| 843 | } |
| 844 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 845 | /* Due to errata, HW requires full toggle transition */ |
| 846 | rc = ahci_platform_enable_clks(hpriv); |
| 847 | if (rc) |
| 848 | goto disable_resources; |
| 849 | ahci_platform_disable_clks(hpriv); |
| 850 | |
| 851 | rc = ahci_platform_enable_resources(hpriv); |
| 852 | if (rc) |
| 853 | goto disable_resources; |
| 854 | |
| 855 | /* Configure the host controller */ |
| 856 | xgene_ahci_hw_init(hpriv); |
Suman Tripathi | 0bed13b | 2014-08-28 14:51:21 +0530 | [diff] [blame] | 857 | skip_clk_phy: |
Kefeng Wang | f9f3691 | 2014-05-14 14:13:41 +0800 | [diff] [blame] | 858 | |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 859 | switch (version) { |
| 860 | case XGENE_AHCI_V1: |
| 861 | hpriv->flags = AHCI_HFLAG_NO_NCQ; |
| 862 | break; |
| 863 | case XGENE_AHCI_V2: |
Suman Tripathi | d867b95 | 2016-02-06 11:25:23 +0530 | [diff] [blame] | 864 | hpriv->flags |= AHCI_HFLAG_YES_FBS; |
| 865 | hpriv->irq_handler = xgene_ahci_irq_intr; |
Suman Tripathi | c9802a4 | 2015-05-11 14:06:15 +0530 | [diff] [blame] | 866 | break; |
| 867 | default: |
| 868 | break; |
| 869 | } |
| 870 | |
| 871 | rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], |
Akinobu Mita | 018d5ef | 2015-01-29 08:30:29 +0900 | [diff] [blame] | 872 | &ahci_platform_sht); |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 873 | if (rc) |
| 874 | goto disable_resources; |
| 875 | |
| 876 | dev_dbg(dev, "X-Gene SATA host controller initialized\n"); |
| 877 | return 0; |
| 878 | |
| 879 | disable_resources: |
| 880 | ahci_platform_disable_resources(hpriv); |
| 881 | return rc; |
| 882 | } |
| 883 | |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 884 | static struct platform_driver xgene_ahci_driver = { |
| 885 | .probe = xgene_ahci_probe, |
| 886 | .remove = ata_platform_remove_one, |
| 887 | .driver = { |
Akinobu Mita | 018d5ef | 2015-01-29 08:30:29 +0900 | [diff] [blame] | 888 | .name = DRV_NAME, |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 889 | .of_match_table = xgene_ahci_of_match, |
Feng Kan | 92b5bf9 | 2015-03-18 17:03:55 -0700 | [diff] [blame] | 890 | .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), |
Loc Ho | 81d01bf | 2014-03-14 17:53:20 -0600 | [diff] [blame] | 891 | }, |
| 892 | }; |
| 893 | |
| 894 | module_platform_driver(xgene_ahci_driver); |
| 895 | |
| 896 | MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); |
| 897 | MODULE_AUTHOR("Loc Ho <lho@apm.com>"); |
| 898 | MODULE_LICENSE("GPL"); |
| 899 | MODULE_VERSION("0.4"); |