Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / a1b8ee105888f7041e99944d4deed0b0c5af5eca / . / arch / arm / boot / dts / dra7.dtsi
blob: 9e3caf3d19fbcf34187495a14eda3daf17aade4a [file] [log] [blame]
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]1/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
8 */
9
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/pinctrl/dra.h>
12
13#include "skeleton.dtsi"
14
15/ {
16 #address-cells = <1>;
17 #size-cells = <1>;
18
19 compatible = "ti,dra7xx";
20 interrupt-parent = <&gic>;
21
22 aliases {
Nishanth Menon20b80942013-10-16 15:21:03 -0500[diff] [blame]23 i2c0 = &i2c1;
24 i2c1 = &i2c2;
25 i2c2 = &i2c3;
26 i2c3 = &i2c4;
27 i2c4 = &i2c5;
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]28 serial0 = &uart1;
29 serial1 = &uart2;
30 serial2 = &uart3;
31 serial3 = &uart4;
32 serial4 = &uart5;
33 serial5 = &uart6;
34 };
35
36 cpus {
37 #address-cells = <1>;
38 #size-cells = <0>;
39
J Keerthy22f1e7e2013-10-16 10:39:05 -0500[diff] [blame]40 cpu0: cpu@0 {
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]41 device_type = "cpu";
42 compatible = "arm,cortex-a15";
43 reg = <0>;
J Keerthy620c5162013-10-16 10:39:07 -0500[diff] [blame]44
45 operating-points = <
46 /* kHz uV */
47 1000000 1060000
48 1176000 1160000
49 >;
Nishanth Menon8d766fa2014-01-29 12:19:17 -0600[diff] [blame]50
51 clocks = <&dpll_mpu_ck>;
52 clock-names = "cpu";
53
54 clock-latency = <300000>; /* From omap-cpufreq driver */
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]55 };
56 cpu@1 {
57 device_type = "cpu";
58 compatible = "arm,cortex-a15";
59 reg = <1>;
60 };
61 };
62
63 timer {
64 compatible = "arm,armv7-timer";
65 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
66 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
67 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
68 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
69 };
70
71 gic: interrupt-controller@48211000 {
72 compatible = "arm,cortex-a15-gic";
73 interrupt-controller;
74 #interrupt-cells = <3>;
75 reg = <0x48211000 0x1000>,
76 <0x48212000 0x1000>,
77 <0x48214000 0x2000>,
78 <0x48216000 0x2000>;
79 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
80 };
81
82 /*
83 * The soc node represents the soc top level view. It is uses for IPs
84 * that are not memory mapped in the MPU view or for the MPU itself.
85 */
86 soc {
87 compatible = "ti,omap-infra";
88 mpu {
89 compatible = "ti,omap5-mpu";
90 ti,hwmods = "mpu";
91 };
92 };
93
94 /*
95 * XXX: Use a flat representation of the SOC interconnect.
96 * The real OMAP interconnect network is quite complex.
97 * Since that will not bring real advantage to represent that in DT for
98 * the moment, just use a fake OCP bus entry to represent the whole bus
99 * hierarchy.
100 */
101 ocp {
102 compatible = "ti,omap4-l3-noc", "simple-bus";
103 #address-cells = <1>;
104 #size-cells = <1>;
105 ranges;
106 ti,hwmods = "l3_main_1", "l3_main_2";
107 reg = <0x44000000 0x2000>,
108 <0x44800000 0x3000>;
109 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
110 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
111
Tero Kristoee6c7502013-07-18 17:18:33 +0300[diff] [blame]112 prm: prm@4ae06000 {
113 compatible = "ti,dra7-prm";
114 reg = <0x4ae06000 0x3000>;
115
116 prm_clocks: clocks {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 };
120
121 prm_clockdomains: clockdomains {
122 };
123 };
124
125 cm_core_aon: cm_core_aon@4a005000 {
126 compatible = "ti,dra7-cm-core-aon";
127 reg = <0x4a005000 0x2000>;
128
129 cm_core_aon_clocks: clocks {
130 #address-cells = <1>;
131 #size-cells = <0>;
132 };
133
134 cm_core_aon_clockdomains: clockdomains {
135 };
136 };
137
138 cm_core: cm_core@4a008000 {
139 compatible = "ti,dra7-cm-core";
140 reg = <0x4a008000 0x3000>;
141
142 cm_core_clocks: clocks {
143 #address-cells = <1>;
144 #size-cells = <0>;
145 };
146
147 cm_core_clockdomains: clockdomains {
148 };
149 };
150
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]151 counter32k: counter@4ae04000 {
152 compatible = "ti,omap-counter32k";
153 reg = <0x4ae04000 0x40>;
154 ti,hwmods = "counter_32k";
155 };
156
157 dra7_pmx_core: pinmux@4a003400 {
158 compatible = "pinctrl-single";
159 reg = <0x4a003400 0x0464>;
160 #address-cells = <1>;
161 #size-cells = <0>;
162 pinctrl-single,register-width = <32>;
163 pinctrl-single,function-mask = <0x3fffffff>;
164 };
165
166 sdma: dma-controller@4a056000 {
167 compatible = "ti,omap4430-sdma";
168 reg = <0x4a056000 0x1000>;
169 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
170 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
171 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
172 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
173 #dma-cells = <1>;
174 #dma-channels = <32>;
175 #dma-requests = <127>;
176 };
177
178 gpio1: gpio@4ae10000 {
179 compatible = "ti,omap4-gpio";
180 reg = <0x4ae10000 0x200>;
181 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
182 ti,hwmods = "gpio1";
183 gpio-controller;
184 #gpio-cells = <2>;
185 interrupt-controller;
186 #interrupt-cells = <1>;
187 };
188
189 gpio2: gpio@48055000 {
190 compatible = "ti,omap4-gpio";
191 reg = <0x48055000 0x200>;
192 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
193 ti,hwmods = "gpio2";
194 gpio-controller;
195 #gpio-cells = <2>;
196 interrupt-controller;
197 #interrupt-cells = <1>;
198 };
199
200 gpio3: gpio@48057000 {
201 compatible = "ti,omap4-gpio";
202 reg = <0x48057000 0x200>;
203 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
204 ti,hwmods = "gpio3";
205 gpio-controller;
206 #gpio-cells = <2>;
207 interrupt-controller;
208 #interrupt-cells = <1>;
209 };
210
211 gpio4: gpio@48059000 {
212 compatible = "ti,omap4-gpio";
213 reg = <0x48059000 0x200>;
214 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
215 ti,hwmods = "gpio4";
216 gpio-controller;
217 #gpio-cells = <2>;
218 interrupt-controller;
219 #interrupt-cells = <1>;
220 };
221
222 gpio5: gpio@4805b000 {
223 compatible = "ti,omap4-gpio";
224 reg = <0x4805b000 0x200>;
225 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
226 ti,hwmods = "gpio5";
227 gpio-controller;
228 #gpio-cells = <2>;
229 interrupt-controller;
230 #interrupt-cells = <1>;
231 };
232
233 gpio6: gpio@4805d000 {
234 compatible = "ti,omap4-gpio";
235 reg = <0x4805d000 0x200>;
236 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
237 ti,hwmods = "gpio6";
238 gpio-controller;
239 #gpio-cells = <2>;
240 interrupt-controller;
241 #interrupt-cells = <1>;
242 };
243
244 gpio7: gpio@48051000 {
245 compatible = "ti,omap4-gpio";
246 reg = <0x48051000 0x200>;
247 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
248 ti,hwmods = "gpio7";
249 gpio-controller;
250 #gpio-cells = <2>;
251 interrupt-controller;
252 #interrupt-cells = <1>;
253 };
254
255 gpio8: gpio@48053000 {
256 compatible = "ti,omap4-gpio";
257 reg = <0x48053000 0x200>;
258 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
259 ti,hwmods = "gpio8";
260 gpio-controller;
261 #gpio-cells = <2>;
262 interrupt-controller;
263 #interrupt-cells = <1>;
264 };
265
266 uart1: serial@4806a000 {
267 compatible = "ti,omap4-uart";
268 reg = <0x4806a000 0x100>;
269 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
270 ti,hwmods = "uart1";
271 clock-frequency = <48000000>;
272 status = "disabled";
273 };
274
275 uart2: serial@4806c000 {
276 compatible = "ti,omap4-uart";
277 reg = <0x4806c000 0x100>;
278 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
279 ti,hwmods = "uart2";
280 clock-frequency = <48000000>;
281 status = "disabled";
282 };
283
284 uart3: serial@48020000 {
285 compatible = "ti,omap4-uart";
286 reg = <0x48020000 0x100>;
287 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
288 ti,hwmods = "uart3";
289 clock-frequency = <48000000>;
290 status = "disabled";
291 };
292
293 uart4: serial@4806e000 {
294 compatible = "ti,omap4-uart";
295 reg = <0x4806e000 0x100>;
296 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
297 ti,hwmods = "uart4";
298 clock-frequency = <48000000>;
299 status = "disabled";
300 };
301
302 uart5: serial@48066000 {
303 compatible = "ti,omap4-uart";
304 reg = <0x48066000 0x100>;
305 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
306 ti,hwmods = "uart5";
307 clock-frequency = <48000000>;
308 status = "disabled";
309 };
310
311 uart6: serial@48068000 {
312 compatible = "ti,omap4-uart";
313 reg = <0x48068000 0x100>;
314 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
315 ti,hwmods = "uart6";
316 clock-frequency = <48000000>;
317 status = "disabled";
318 };
319
320 uart7: serial@48420000 {
321 compatible = "ti,omap4-uart";
322 reg = <0x48420000 0x100>;
323 ti,hwmods = "uart7";
324 clock-frequency = <48000000>;
325 status = "disabled";
326 };
327
328 uart8: serial@48422000 {
329 compatible = "ti,omap4-uart";
330 reg = <0x48422000 0x100>;
331 ti,hwmods = "uart8";
332 clock-frequency = <48000000>;
333 status = "disabled";
334 };
335
336 uart9: serial@48424000 {
337 compatible = "ti,omap4-uart";
338 reg = <0x48424000 0x100>;
339 ti,hwmods = "uart9";
340 clock-frequency = <48000000>;
341 status = "disabled";
342 };
343
344 uart10: serial@4ae2b000 {
345 compatible = "ti,omap4-uart";
346 reg = <0x4ae2b000 0x100>;
347 ti,hwmods = "uart10";
348 clock-frequency = <48000000>;
349 status = "disabled";
350 };
351
352 timer1: timer@4ae18000 {
353 compatible = "ti,omap5430-timer";
354 reg = <0x4ae18000 0x80>;
355 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
356 ti,hwmods = "timer1";
357 ti,timer-alwon;
358 };
359
360 timer2: timer@48032000 {
361 compatible = "ti,omap5430-timer";
362 reg = <0x48032000 0x80>;
363 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
364 ti,hwmods = "timer2";
365 };
366
367 timer3: timer@48034000 {
368 compatible = "ti,omap5430-timer";
369 reg = <0x48034000 0x80>;
370 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
371 ti,hwmods = "timer3";
372 };
373
374 timer4: timer@48036000 {
375 compatible = "ti,omap5430-timer";
376 reg = <0x48036000 0x80>;
377 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
378 ti,hwmods = "timer4";
379 };
380
381 timer5: timer@48820000 {
382 compatible = "ti,omap5430-timer";
383 reg = <0x48820000 0x80>;
384 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
385 ti,hwmods = "timer5";
386 ti,timer-dsp;
387 };
388
389 timer6: timer@48822000 {
390 compatible = "ti,omap5430-timer";
391 reg = <0x48822000 0x80>;
392 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
393 ti,hwmods = "timer6";
394 ti,timer-dsp;
395 ti,timer-pwm;
396 };
397
398 timer7: timer@48824000 {
399 compatible = "ti,omap5430-timer";
400 reg = <0x48824000 0x80>;
401 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
402 ti,hwmods = "timer7";
403 ti,timer-dsp;
404 };
405
406 timer8: timer@48826000 {
407 compatible = "ti,omap5430-timer";
408 reg = <0x48826000 0x80>;
409 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
410 ti,hwmods = "timer8";
411 ti,timer-dsp;
412 ti,timer-pwm;
413 };
414
415 timer9: timer@4803e000 {
416 compatible = "ti,omap5430-timer";
417 reg = <0x4803e000 0x80>;
418 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
419 ti,hwmods = "timer9";
420 };
421
422 timer10: timer@48086000 {
423 compatible = "ti,omap5430-timer";
424 reg = <0x48086000 0x80>;
425 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
426 ti,hwmods = "timer10";
427 };
428
429 timer11: timer@48088000 {
430 compatible = "ti,omap5430-timer";
431 reg = <0x48088000 0x80>;
432 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
433 ti,hwmods = "timer11";
434 ti,timer-pwm;
435 };
436
437 timer13: timer@48828000 {
438 compatible = "ti,omap5430-timer";
439 reg = <0x48828000 0x80>;
440 ti,hwmods = "timer13";
441 status = "disabled";
442 };
443
444 timer14: timer@4882a000 {
445 compatible = "ti,omap5430-timer";
446 reg = <0x4882a000 0x80>;
447 ti,hwmods = "timer14";
448 status = "disabled";
449 };
450
451 timer15: timer@4882c000 {
452 compatible = "ti,omap5430-timer";
453 reg = <0x4882c000 0x80>;
454 ti,hwmods = "timer15";
455 status = "disabled";
456 };
457
458 timer16: timer@4882e000 {
459 compatible = "ti,omap5430-timer";
460 reg = <0x4882e000 0x80>;
461 ti,hwmods = "timer16";
462 status = "disabled";
463 };
464
465 wdt2: wdt@4ae14000 {
466 compatible = "ti,omap4-wdt";
467 reg = <0x4ae14000 0x80>;
468 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
469 ti,hwmods = "wd_timer2";
470 };
471
Suman Annadbd7c192014-01-13 18:26:46 -0600[diff] [blame]472 hwspinlock: spinlock@4a0f6000 {
473 compatible = "ti,omap4-hwspinlock";
474 reg = <0x4a0f6000 0x1000>;
475 ti,hwmods = "spinlock";
476 #hwlock-cells = <1>;
477 };
478
Archit Taneja1a5fe3c2013-12-17 15:32:21 +0530[diff] [blame]479 dmm@4e000000 {
480 compatible = "ti,omap5-dmm";
481 reg = <0x4e000000 0x800>;
482 interrupts = <0 113 0x4>;
483 ti,hwmods = "dmm";
484 };
485
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]486 i2c1: i2c@48070000 {
487 compatible = "ti,omap4-i2c";
488 reg = <0x48070000 0x100>;
489 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
490 #address-cells = <1>;
491 #size-cells = <0>;
492 ti,hwmods = "i2c1";
493 status = "disabled";
494 };
495
496 i2c2: i2c@48072000 {
497 compatible = "ti,omap4-i2c";
498 reg = <0x48072000 0x100>;
499 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
500 #address-cells = <1>;
501 #size-cells = <0>;
502 ti,hwmods = "i2c2";
503 status = "disabled";
504 };
505
506 i2c3: i2c@48060000 {
507 compatible = "ti,omap4-i2c";
508 reg = <0x48060000 0x100>;
509 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
510 #address-cells = <1>;
511 #size-cells = <0>;
512 ti,hwmods = "i2c3";
513 status = "disabled";
514 };
515
516 i2c4: i2c@4807a000 {
517 compatible = "ti,omap4-i2c";
518 reg = <0x4807a000 0x100>;
519 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
520 #address-cells = <1>;
521 #size-cells = <0>;
522 ti,hwmods = "i2c4";
523 status = "disabled";
524 };
525
526 i2c5: i2c@4807c000 {
527 compatible = "ti,omap4-i2c";
528 reg = <0x4807c000 0x100>;
529 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
530 #address-cells = <1>;
531 #size-cells = <0>;
532 ti,hwmods = "i2c5";
533 status = "disabled";
534 };
535
536 mmc1: mmc@4809c000 {
537 compatible = "ti,omap4-hsmmc";
538 reg = <0x4809c000 0x400>;
539 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
540 ti,hwmods = "mmc1";
541 ti,dual-volt;
542 ti,needs-special-reset;
543 dmas = <&sdma 61>, <&sdma 62>;
544 dma-names = "tx", "rx";
545 status = "disabled";
546 };
547
548 mmc2: mmc@480b4000 {
549 compatible = "ti,omap4-hsmmc";
550 reg = <0x480b4000 0x400>;
551 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
552 ti,hwmods = "mmc2";
553 ti,needs-special-reset;
554 dmas = <&sdma 47>, <&sdma 48>;
555 dma-names = "tx", "rx";
556 status = "disabled";
557 };
558
559 mmc3: mmc@480ad000 {
560 compatible = "ti,omap4-hsmmc";
561 reg = <0x480ad000 0x400>;
562 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
563 ti,hwmods = "mmc3";
564 ti,needs-special-reset;
565 dmas = <&sdma 77>, <&sdma 78>;
566 dma-names = "tx", "rx";
567 status = "disabled";
568 };
569
570 mmc4: mmc@480d1000 {
571 compatible = "ti,omap4-hsmmc";
572 reg = <0x480d1000 0x400>;
573 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
574 ti,hwmods = "mmc4";
575 ti,needs-special-reset;
576 dmas = <&sdma 57>, <&sdma 58>;
577 dma-names = "tx", "rx";
578 status = "disabled";
579 };
580
Nishanth Menona1b8ee12014-03-03 20:20:23 +0530[diff] [blame^]581 abb_mpu: regulator-abb-mpu {
582 compatible = "ti,abb-v3";
583 regulator-name = "abb_mpu";
584 #address-cells = <0>;
585 #size-cells = <0>;
586 clocks = <&sys_clkin1>;
587 ti,settling-time = <50>;
588 ti,clock-cycles = <16>;
589
590 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
591 <0x4ae06014 0x4>, <0x4a003b20 0x8>,
592 <0x4ae0c158 0x4>;
593 reg-names = "setup-address", "control-address",
594 "int-address", "efuse-address",
595 "ldo-address";
596 ti,tranxdone-status-mask = <0x80>;
597 /* LDOVBBMPU_FBB_MUX_CTRL */
598 ti,ldovbb-override-mask = <0x400>;
599 /* LDOVBBMPU_FBB_VSET_OUT */
600 ti,ldovbb-vset-mask = <0x1F>;
601
602 /*
603 * NOTE: only FBB mode used but actual vset will
604 * determine final biasing
605 */
606 ti,abb_info = <
607 /*uV ABB efuse rbb_m fbb_m vset_m*/
608 1060000 0 0x0 0 0x02000000 0x01F00000
609 1160000 0 0x4 0 0x02000000 0x01F00000
610 1210000 0 0x8 0 0x02000000 0x01F00000
611 >;
612 };
613
614 abb_ivahd: regulator-abb-ivahd {
615 compatible = "ti,abb-v3";
616 regulator-name = "abb_ivahd";
617 #address-cells = <0>;
618 #size-cells = <0>;
619 clocks = <&sys_clkin1>;
620 ti,settling-time = <50>;
621 ti,clock-cycles = <16>;
622
623 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
624 <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
625 <0x4a002470 0x4>;
626 reg-names = "setup-address", "control-address",
627 "int-address", "efuse-address",
628 "ldo-address";
629 ti,tranxdone-status-mask = <0x40000000>;
630 /* LDOVBBIVA_FBB_MUX_CTRL */
631 ti,ldovbb-override-mask = <0x400>;
632 /* LDOVBBIVA_FBB_VSET_OUT */
633 ti,ldovbb-vset-mask = <0x1F>;
634
635 /*
636 * NOTE: only FBB mode used but actual vset will
637 * determine final biasing
638 */
639 ti,abb_info = <
640 /*uV ABB efuse rbb_m fbb_m vset_m*/
641 1055000 0 0x0 0 0x02000000 0x01F00000
642 1150000 0 0x4 0 0x02000000 0x01F00000
643 1250000 0 0x8 0 0x02000000 0x01F00000
644 >;
645 };
646
647 abb_dspeve: regulator-abb-dspeve {
648 compatible = "ti,abb-v3";
649 regulator-name = "abb_dspeve";
650 #address-cells = <0>;
651 #size-cells = <0>;
652 clocks = <&sys_clkin1>;
653 ti,settling-time = <50>;
654 ti,clock-cycles = <16>;
655
656 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
657 <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
658 <0x4a00246c 0x4>;
659 reg-names = "setup-address", "control-address",
660 "int-address", "efuse-address",
661 "ldo-address";
662 ti,tranxdone-status-mask = <0x20000000>;
663 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
664 ti,ldovbb-override-mask = <0x400>;
665 /* LDOVBBDSPEVE_FBB_VSET_OUT */
666 ti,ldovbb-vset-mask = <0x1F>;
667
668 /*
669 * NOTE: only FBB mode used but actual vset will
670 * determine final biasing
671 */
672 ti,abb_info = <
673 /*uV ABB efuse rbb_m fbb_m vset_m*/
674 1055000 0 0x0 0 0x02000000 0x01F00000
675 1150000 0 0x4 0 0x02000000 0x01F00000
676 1250000 0 0x8 0 0x02000000 0x01F00000
677 >;
678 };
679
680 abb_gpu: regulator-abb-gpu {
681 compatible = "ti,abb-v3";
682 regulator-name = "abb_gpu";
683 #address-cells = <0>;
684 #size-cells = <0>;
685 clocks = <&sys_clkin1>;
686 ti,settling-time = <50>;
687 ti,clock-cycles = <16>;
688
689 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
690 <0x4ae06010 0x4>, <0x4a003b08 0x8>,
691 <0x4ae0c154 0x4>;
692 reg-names = "setup-address", "control-address",
693 "int-address", "efuse-address",
694 "ldo-address";
695 ti,tranxdone-status-mask = <0x10000000>;
696 /* LDOVBBGPU_FBB_MUX_CTRL */
697 ti,ldovbb-override-mask = <0x400>;
698 /* LDOVBBGPU_FBB_VSET_OUT */
699 ti,ldovbb-vset-mask = <0x1F>;
700
701 /*
702 * NOTE: only FBB mode used but actual vset will
703 * determine final biasing
704 */
705 ti,abb_info = <
706 /*uV ABB efuse rbb_m fbb_m vset_m*/
707 1090000 0 0x0 0 0x02000000 0x01F00000
708 1210000 0 0x4 0 0x02000000 0x01F00000
709 1280000 0 0x8 0 0x02000000 0x01F00000
710 >;
711 };
712
R Sricharan6e58b8f2013-08-14 19:08:20 +0530[diff] [blame]713 mcspi1: spi@48098000 {
714 compatible = "ti,omap4-mcspi";
715 reg = <0x48098000 0x200>;
716 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
717 #address-cells = <1>;
718 #size-cells = <0>;
719 ti,hwmods = "mcspi1";
720 ti,spi-num-cs = <4>;
721 dmas = <&sdma 35>,
722 <&sdma 36>,
723 <&sdma 37>,
724 <&sdma 38>,
725 <&sdma 39>,
726 <&sdma 40>,
727 <&sdma 41>,
728 <&sdma 42>;
729 dma-names = "tx0", "rx0", "tx1", "rx1",
730 "tx2", "rx2", "tx3", "rx3";
731 status = "disabled";
732 };
733
734 mcspi2: spi@4809a000 {
735 compatible = "ti,omap4-mcspi";
736 reg = <0x4809a000 0x200>;
737 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
738 #address-cells = <1>;
739 #size-cells = <0>;
740 ti,hwmods = "mcspi2";
741 ti,spi-num-cs = <2>;
742 dmas = <&sdma 43>,
743 <&sdma 44>,
744 <&sdma 45>,
745 <&sdma 46>;
746 dma-names = "tx0", "rx0", "tx1", "rx1";
747 status = "disabled";
748 };
749
750 mcspi3: spi@480b8000 {
751 compatible = "ti,omap4-mcspi";
752 reg = <0x480b8000 0x200>;
753 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
754 #address-cells = <1>;
755 #size-cells = <0>;
756 ti,hwmods = "mcspi3";
757 ti,spi-num-cs = <2>;
758 dmas = <&sdma 15>, <&sdma 16>;
759 dma-names = "tx0", "rx0";
760 status = "disabled";
761 };
762
763 mcspi4: spi@480ba000 {
764 compatible = "ti,omap4-mcspi";
765 reg = <0x480ba000 0x200>;
766 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
767 #address-cells = <1>;
768 #size-cells = <0>;
769 ti,hwmods = "mcspi4";
770 ti,spi-num-cs = <1>;
771 dmas = <&sdma 70>, <&sdma 71>;
772 dma-names = "tx0", "rx0";
773 status = "disabled";
774 };
775 };
776};
Tero Kristoee6c7502013-07-18 17:18:33 +0300[diff] [blame]777
778/include/ "dra7xx-clocks.dtsi"