blob: 4a917748fd9ffac79f863675574ffd2155994858 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Input core configuration
3#
4menuconfig INPUT_KEYBOARD
5 bool "Keyboards" if EMBEDDED || !X86
6 default y
7 help
8 Say Y here, and a list of supported keyboards will be displayed.
9 This option doesn't affect the kernel.
10
11 If unsure, say Y.
12
13if INPUT_KEYBOARD
14
15config KEYBOARD_ATKBD
Arthur Othienof2c84c02005-10-30 23:04:05 -050016 tristate "AT keyboard" if !X86_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 default y
18 select SERIO
19 select SERIO_LIBPS2
Arthur Othienof2c84c02005-10-30 23:04:05 -050020 select SERIO_I8042 if X86_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 select SERIO_GSCPS2 if GSC
22 help
23 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
24 you'll need this, unless you have a different type keyboard (USB, ADB
25 or other). This also works for AT and PS/2 keyboards connected over a
26 PS/2 to serial converter.
27
28 If unsure, say Y.
29
30 To compile this driver as a module, choose M here: the
31 module will be called atkbd.
32
33config KEYBOARD_ATKBD_HP_KEYCODES
34 bool "Use HP keyboard scancodes"
35 depends on PARISC && KEYBOARD_ATKBD
36 default y
37 help
38 Say Y here if you have a PA-RISC machine and want to use an AT or
39 PS/2 keyboard, and your keyboard uses keycodes that are specific to
40 PA-RISC keyboards.
41
42 Say N if you use a standard keyboard.
43
44config KEYBOARD_ATKBD_RDI_KEYCODES
45 bool "Use PrecisionBook keyboard scancodes"
46 depends on KEYBOARD_ATKBD_HP_KEYCODES
47 default n
48 help
49 If you have an RDI PrecisionBook, say Y here if you want to use its
50 built-in keyboard (as opposed to an external keyboard).
51
52 The PrecisionBook has five keys that conflict with those used by most
53 AT and PS/2 keyboards. These are as follows:
54
55 PrecisionBook Standard AT or PS/2
56
57 F1 F12
58 Left Ctrl Left Alt
59 Caps Lock Left Ctrl
60 Right Ctrl Caps Lock
61 Left 102nd key (the key to the right of Left Shift)
62
63 If you say N here, and use the PrecisionBook keyboard, then each key
64 in the left-hand column will be interpreted as the corresponding key
65 in the right-hand column.
66
67 If you say Y here, and use an external keyboard, then each key in the
68 right-hand column will be interpreted as the key shown in the
69 left-hand column.
70
71config KEYBOARD_SUNKBD
72 tristate "Sun Type 4 and Type 5 keyboard"
73 select SERIO
74 help
75 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
76 connected either to the Sun keyboard connector or to an serial
77 (RS-232) port via a simple adapter.
78
79 To compile this driver as a module, choose M here: the
80 module will be called sunkbd.
81
82config KEYBOARD_LKKBD
83 tristate "DECstation/VAXstation LK201/LK401 keyboard"
84 select SERIO
85 help
86 Say Y here if you want to use a LK201 or LK401 style serial
87 keyboard. This keyboard is also useable on PCs if you attach
88 it with the inputattach program. The connector pinout is
89 described within lkkbd.c.
90
91 To compile this driver as a module, choose M here: the
92 module will be called lkkbd.
93
94config KEYBOARD_LOCOMO
95 tristate "LoCoMo Keyboard Support"
Pavel Machek65d406a2005-10-14 15:59:03 -070096 depends on SHARP_LOCOMO && INPUT_KEYBOARD
Linus Torvalds1da177e2005-04-16 15:20:36 -070097 help
98 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
99
100 To compile this driver as a module, choose M here: the
101 module will be called locomokbd.
102
103config KEYBOARD_XTKBD
104 tristate "XT keyboard"
105 select SERIO
106 help
107 Say Y here if you want to use the old IBM PC/XT keyboard (or
108 compatible) on your system. This is only possible with a
109 parallel port keyboard adapter, you cannot connect it to the
110 keyboard port on a PC that runs Linux.
111
112 To compile this driver as a module, choose M here: the
113 module will be called xtkbd.
114
115config KEYBOARD_NEWTON
116 tristate "Newton keyboard"
117 select SERIO
118 help
119 Say Y here if you have a Newton keyboard on a serial port.
120
121 To compile this driver as a module, choose M here: the
122 module will be called newtonkbd.
123
124config KEYBOARD_CORGI
125 tristate "Corgi keyboard"
126 depends on PXA_SHARPSL
127 default y
128 help
129 Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
130 series of PDAs.
131
132 To compile this driver as a module, choose M here: the
133 module will be called corgikbd.
134
Richard Purdiefff71312005-09-13 01:25:35 -0700135config KEYBOARD_SPITZ
136 tristate "Spitz keyboard"
137 depends on PXA_SHARPSL
138 default y
139 help
140 Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
141 SL-C3000 and Sl-C3100 series of PDAs.
142
143 To compile this driver as a module, choose M here: the
144 module will be called spitzkbd.
145
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146config KEYBOARD_MAPLE
147 tristate "Maple bus keyboard"
148 depends on SH_DREAMCAST && MAPLE
149 help
150 Say Y here if you have a DreamCast console running Linux and have
151 a keyboard attached to its Maple bus.
152
153 To compile this driver as a module, choose M here: the
154 module will be called maple_keyb.
155
156config KEYBOARD_AMIGA
157 tristate "Amiga keyboard"
158 depends on AMIGA
159 help
160 Say Y here if you are running Linux on any AMIGA and have a keyboard
161 attached.
162
163 To compile this driver as a module, choose M here: the
164 module will be called amikbd.
165
166config KEYBOARD_HIL_OLD
167 tristate "HP HIL keyboard support (simple driver)"
168 depends on GSC
169 default y
170 help
171 The "Human Interface Loop" is a older, 8-channel USB-like
172 controller used in several Hewlett Packard models. This driver
173 was adapted from the one written for m68k/hp300, and implements
174 support for a keyboard attached to the HIL port, but not for
175 any other types of HIL input devices like mice or tablets.
176 However, it has been thoroughly tested and is stable.
177
178 If you want full HIL support including support for multiple
179 keyboards, mices and tablets, you have to enable the
180 "HP System Device Controller i8042 Support" in the input/serio
181 submenu.
182
183config KEYBOARD_HIL
184 tristate "HP HIL keyboard support"
185 depends on GSC
186 default y
187 select HP_SDC
188 select HIL_MLC
189 select SERIO
190 help
191 The "Human Interface Loop" is a older, 8-channel USB-like
192 controller used in several Hewlett Packard models.
193 This driver implements support for HIL-keyboards attached
194 to your machine, so normally you should say Y here.
195
196endif