blob: 34d4dcc0320ac9774e2c480e0d9c43e140ead5fe [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/video/pxafb.c
3 *
4 * Copyright (C) 1999 Eric A. Thomas.
5 * Copyright (C) 2004 Jean-Frederic Clere.
6 * Copyright (C) 2004 Ian Campbell.
7 * Copyright (C) 2004 Jeff Lackey.
8 * Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
9 * which in turn is
10 * Based on acornfb.c Copyright (C) Russell King.
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file COPYING in the main directory of this archive for
14 * more details.
15 *
16 * Intel PXA250/210 LCD Controller Frame Buffer Driver
17 *
18 * Please direct your questions and comments on this driver to the following
19 * email address:
20 *
21 * linux-arm-kernel@lists.arm.linux.org.uk
22 *
23 */
24
25#include <linux/config.h>
26#include <linux/module.h>
27#include <linux/moduleparam.h>
28#include <linux/kernel.h>
29#include <linux/sched.h>
30#include <linux/errno.h>
31#include <linux/string.h>
32#include <linux/interrupt.h>
33#include <linux/slab.h>
34#include <linux/fb.h>
35#include <linux/delay.h>
36#include <linux/init.h>
37#include <linux/ioport.h>
38#include <linux/cpufreq.h>
39#include <linux/device.h>
40#include <linux/dma-mapping.h>
41
42#include <asm/hardware.h>
43#include <asm/io.h>
44#include <asm/irq.h>
45#include <asm/uaccess.h>
Nicolas Pitrebf1b8ab2005-06-23 21:56:45 +010046#include <asm/div64.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070047#include <asm/arch/pxa-regs.h>
48#include <asm/arch/bitfield.h>
49#include <asm/arch/pxafb.h>
50
51/*
52 * Complain if VAR is out of range.
53 */
54#define DEBUG_VAR 1
55
56#include "pxafb.h"
57
58/* Bits which should not be set in machine configuration structures */
59#define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
60#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
61
62static void (*pxafb_backlight_power)(int);
63static void (*pxafb_lcd_power)(int);
64
65static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
66static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
67
68#ifdef CONFIG_FB_PXA_PARAMETERS
69#define PXAFB_OPTIONS_SIZE 256
70static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
71#endif
72
73static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
74{
75 unsigned long flags;
76
77 local_irq_save(flags);
78 /*
79 * We need to handle two requests being made at the same time.
80 * There are two important cases:
81 * 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
82 * We must perform the unblanking, which will do our REENABLE for us.
83 * 2. When we are blanking, but immediately unblank before we have
84 * blanked. We do the "REENABLE" thing here as well, just to be sure.
85 */
86 if (fbi->task_state == C_ENABLE && state == C_REENABLE)
87 state = (u_int) -1;
88 if (fbi->task_state == C_DISABLE && state == C_ENABLE)
89 state = C_REENABLE;
90
91 if (state != (u_int)-1) {
92 fbi->task_state = state;
93 schedule_work(&fbi->task);
94 }
95 local_irq_restore(flags);
96}
97
98static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
99{
100 chan &= 0xffff;
101 chan >>= 16 - bf->length;
102 return chan << bf->offset;
103}
104
105static int
106pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
107 u_int trans, struct fb_info *info)
108{
109 struct pxafb_info *fbi = (struct pxafb_info *)info;
110 u_int val, ret = 1;
111
112 if (regno < fbi->palette_size) {
113 if (fbi->fb.var.grayscale) {
114 val = ((blue >> 8) & 0x00ff);
115 } else {
116 val = ((red >> 0) & 0xf800);
117 val |= ((green >> 5) & 0x07e0);
118 val |= ((blue >> 11) & 0x001f);
119 }
120 fbi->palette_cpu[regno] = val;
121 ret = 0;
122 }
123 return ret;
124}
125
126static int
127pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
128 u_int trans, struct fb_info *info)
129{
130 struct pxafb_info *fbi = (struct pxafb_info *)info;
131 unsigned int val;
132 int ret = 1;
133
134 /*
135 * If inverse mode was selected, invert all the colours
136 * rather than the register number. The register number
137 * is what you poke into the framebuffer to produce the
138 * colour you requested.
139 */
140 if (fbi->cmap_inverse) {
141 red = 0xffff - red;
142 green = 0xffff - green;
143 blue = 0xffff - blue;
144 }
145
146 /*
147 * If greyscale is true, then we convert the RGB value
148 * to greyscale no matter what visual we are using.
149 */
150 if (fbi->fb.var.grayscale)
151 red = green = blue = (19595 * red + 38470 * green +
152 7471 * blue) >> 16;
153
154 switch (fbi->fb.fix.visual) {
155 case FB_VISUAL_TRUECOLOR:
156 /*
157 * 16-bit True Colour. We encode the RGB value
158 * according to the RGB bitfield information.
159 */
160 if (regno < 16) {
161 u32 *pal = fbi->fb.pseudo_palette;
162
163 val = chan_to_field(red, &fbi->fb.var.red);
164 val |= chan_to_field(green, &fbi->fb.var.green);
165 val |= chan_to_field(blue, &fbi->fb.var.blue);
166
167 pal[regno] = val;
168 ret = 0;
169 }
170 break;
171
172 case FB_VISUAL_STATIC_PSEUDOCOLOR:
173 case FB_VISUAL_PSEUDOCOLOR:
174 ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
175 break;
176 }
177
178 return ret;
179}
180
181/*
182 * pxafb_bpp_to_lccr3():
183 * Convert a bits per pixel value to the correct bit pattern for LCCR3
184 */
185static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
186{
187 int ret = 0;
188 switch (var->bits_per_pixel) {
189 case 1: ret = LCCR3_1BPP; break;
190 case 2: ret = LCCR3_2BPP; break;
191 case 4: ret = LCCR3_4BPP; break;
192 case 8: ret = LCCR3_8BPP; break;
193 case 16: ret = LCCR3_16BPP; break;
194 }
195 return ret;
196}
197
198#ifdef CONFIG_CPU_FREQ
199/*
200 * pxafb_display_dma_period()
201 * Calculate the minimum period (in picoseconds) between two DMA
202 * requests for the LCD controller. If we hit this, it means we're
203 * doing nothing but LCD DMA.
204 */
205static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
206{
207 /*
208 * Period = pixclock * bits_per_byte * bytes_per_transfer
209 * / memory_bits_per_pixel;
210 */
211 return var->pixclock * 8 * 16 / var->bits_per_pixel;
212}
213
214extern unsigned int get_clk_frequency_khz(int info);
215#endif
216
217/*
218 * pxafb_check_var():
219 * Get the video params out of 'var'. If a value doesn't fit, round it up,
220 * if it's too big, return -EINVAL.
221 *
222 * Round up in the following order: bits_per_pixel, xres,
223 * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
224 * bitfields, horizontal timing, vertical timing.
225 */
226static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
227{
228 struct pxafb_info *fbi = (struct pxafb_info *)info;
229
230 if (var->xres < MIN_XRES)
231 var->xres = MIN_XRES;
232 if (var->yres < MIN_YRES)
233 var->yres = MIN_YRES;
234 if (var->xres > fbi->max_xres)
235 var->xres = fbi->max_xres;
236 if (var->yres > fbi->max_yres)
237 var->yres = fbi->max_yres;
238 var->xres_virtual =
239 max(var->xres_virtual, var->xres);
240 var->yres_virtual =
241 max(var->yres_virtual, var->yres);
242
243 /*
244 * Setup the RGB parameters for this display.
245 *
246 * The pixel packing format is described on page 7-11 of the
247 * PXA2XX Developer's Manual.
248 */
249 if (var->bits_per_pixel == 16) {
250 var->red.offset = 11; var->red.length = 5;
251 var->green.offset = 5; var->green.length = 6;
252 var->blue.offset = 0; var->blue.length = 5;
253 var->transp.offset = var->transp.length = 0;
254 } else {
255 var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
256 var->red.length = 8;
257 var->green.length = 8;
258 var->blue.length = 8;
259 var->transp.length = 0;
260 }
261
262#ifdef CONFIG_CPU_FREQ
263 DPRINTK("dma period = %d ps, clock = %d kHz\n",
264 pxafb_display_dma_period(var),
265 get_clk_frequency_khz(0));
266#endif
267
268 return 0;
269}
270
271static inline void pxafb_set_truecolor(u_int is_true_color)
272{
273 DPRINTK("true_color = %d\n", is_true_color);
274 // do your machine-specific setup if needed
275}
276
277/*
278 * pxafb_set_par():
279 * Set the user defined part of the display for the specified console
280 */
281static int pxafb_set_par(struct fb_info *info)
282{
283 struct pxafb_info *fbi = (struct pxafb_info *)info;
284 struct fb_var_screeninfo *var = &info->var;
285 unsigned long palette_mem_size;
286
287 DPRINTK("set_par\n");
288
289 if (var->bits_per_pixel == 16)
290 fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
291 else if (!fbi->cmap_static)
292 fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
293 else {
294 /*
295 * Some people have weird ideas about wanting static
296 * pseudocolor maps. I suspect their user space
297 * applications are broken.
298 */
299 fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
300 }
301
302 fbi->fb.fix.line_length = var->xres_virtual *
303 var->bits_per_pixel / 8;
304 if (var->bits_per_pixel == 16)
305 fbi->palette_size = 0;
306 else
307 fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
308
309 palette_mem_size = fbi->palette_size * sizeof(u16);
310
311 DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
312
313 fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
314 fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
315
316 /*
317 * Set (any) board control register to handle new color depth
318 */
319 pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
320
321 if (fbi->fb.var.bits_per_pixel == 16)
322 fb_dealloc_cmap(&fbi->fb.cmap);
323 else
324 fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
325
326 pxafb_activate_var(var, fbi);
327
328 return 0;
329}
330
331/*
332 * Formal definition of the VESA spec:
333 * On
334 * This refers to the state of the display when it is in full operation
335 * Stand-By
336 * This defines an optional operating state of minimal power reduction with
337 * the shortest recovery time
338 * Suspend
339 * This refers to a level of power management in which substantial power
340 * reduction is achieved by the display. The display can have a longer
341 * recovery time from this state than from the Stand-by state
342 * Off
343 * This indicates that the display is consuming the lowest level of power
344 * and is non-operational. Recovery from this state may optionally require
345 * the user to manually power on the monitor
346 *
347 * Now, the fbdev driver adds an additional state, (blank), where they
348 * turn off the video (maybe by colormap tricks), but don't mess with the
349 * video itself: think of it semantically between on and Stand-By.
350 *
351 * So here's what we should do in our fbdev blank routine:
352 *
353 * VESA_NO_BLANKING (mode 0) Video on, front/back light on
354 * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off
355 * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off
356 * VESA_POWERDOWN (mode 3) Video off, front/back light off
357 *
358 * This will match the matrox implementation.
359 */
360
361/*
362 * pxafb_blank():
363 * Blank the display by setting all palette values to zero. Note, the
364 * 16 bpp mode does not really use the palette, so this will not
365 * blank the display in all modes.
366 */
367static int pxafb_blank(int blank, struct fb_info *info)
368{
369 struct pxafb_info *fbi = (struct pxafb_info *)info;
370 int i;
371
372 DPRINTK("pxafb_blank: blank=%d\n", blank);
373
374 switch (blank) {
375 case FB_BLANK_POWERDOWN:
376 case FB_BLANK_VSYNC_SUSPEND:
377 case FB_BLANK_HSYNC_SUSPEND:
378 case FB_BLANK_NORMAL:
379 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
380 fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
381 for (i = 0; i < fbi->palette_size; i++)
382 pxafb_setpalettereg(i, 0, 0, 0, 0, info);
383
384 pxafb_schedule_work(fbi, C_DISABLE);
385 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
386 break;
387
388 case FB_BLANK_UNBLANK:
389 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
390 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
391 fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
392 fb_set_cmap(&fbi->fb.cmap, info);
393 pxafb_schedule_work(fbi, C_ENABLE);
394 }
395 return 0;
396}
397
398static int pxafb_mmap(struct fb_info *info, struct file *file,
399 struct vm_area_struct *vma)
400{
401 struct pxafb_info *fbi = (struct pxafb_info *)info;
402 unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
403
404 if (off < info->fix.smem_len) {
405 vma->vm_pgoff += 1;
406 return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
407 fbi->map_dma, fbi->map_size);
408 }
409 return -EINVAL;
410}
411
412static struct fb_ops pxafb_ops = {
413 .owner = THIS_MODULE,
414 .fb_check_var = pxafb_check_var,
415 .fb_set_par = pxafb_set_par,
416 .fb_setcolreg = pxafb_setcolreg,
417 .fb_fillrect = cfb_fillrect,
418 .fb_copyarea = cfb_copyarea,
419 .fb_imageblit = cfb_imageblit,
420 .fb_blank = pxafb_blank,
421 .fb_cursor = soft_cursor,
422 .fb_mmap = pxafb_mmap,
423};
424
425/*
426 * Calculate the PCD value from the clock rate (in picoseconds).
427 * We take account of the PPCR clock setting.
428 * From PXA Developer's Manual:
429 *
430 * PixelClock = LCLK
431 * -------------
432 * 2 ( PCD + 1 )
433 *
434 * PCD = LCLK
435 * ------------- - 1
436 * 2(PixelClock)
437 *
438 * Where:
439 * LCLK = LCD/Memory Clock
440 * PCD = LCCR3[7:0]
441 *
442 * PixelClock here is in Hz while the pixclock argument given is the
443 * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
444 *
445 * The function get_lclk_frequency_10khz returns LCLK in units of
446 * 10khz. Calling the result of this function lclk gives us the
447 * following
448 *
449 * PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
450 * -------------------------------------- - 1
451 * 2
452 *
453 * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
454 */
455static inline unsigned int get_pcd(unsigned int pixclock)
456{
457 unsigned long long pcd;
458
459 /* FIXME: Need to take into account Double Pixel Clock mode
460 * (DPC) bit? or perhaps set it based on the various clock
461 * speeds */
462
463 pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
Nicolas Pitrebf1b8ab2005-06-23 21:56:45 +0100464 do_div(pcd, 100000000 * 2);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465 /* no need for this, since we should subtract 1 anyway. they cancel */
466 /* pcd += 1; */ /* make up for integer math truncations */
467 return (unsigned int)pcd;
468}
469
470/*
Richard Purdieba44cd22005-09-09 13:10:03 -0700471 * Some touchscreens need hsync information from the video driver to
472 * function correctly. We export it here.
473 */
474static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
475{
476 unsigned long long htime;
477
478 if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
479 fbi->hsync_time=0;
480 return;
481 }
482
483 htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000;
484 do_div(htime, pcd * fbi->fb.var.hsync_len);
485 fbi->hsync_time = htime;
486}
487
488unsigned long pxafb_get_hsync_time(struct device *dev)
489{
490 struct pxafb_info *fbi = dev_get_drvdata(dev);
491
492 /* If display is blanked/suspended, hsync isn't active */
493 if (!fbi || (fbi->state != C_ENABLE))
494 return 0;
495
496 return fbi->hsync_time;
497}
498EXPORT_SYMBOL(pxafb_get_hsync_time);
499
500/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501 * pxafb_activate_var():
502 * Configures LCD Controller based on entries in var parameter. Settings are
503 * only written to the controller if changes were made.
504 */
505static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi)
506{
507 struct pxafb_lcd_reg new_regs;
508 u_long flags;
509 u_int lines_per_panel, pcd = get_pcd(var->pixclock);
510
511 DPRINTK("Configuring PXA LCD\n");
512
513 DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
514 var->xres, var->hsync_len,
515 var->left_margin, var->right_margin);
516 DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
517 var->yres, var->vsync_len,
518 var->upper_margin, var->lower_margin);
519 DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd);
520
521#if DEBUG_VAR
522 if (var->xres < 16 || var->xres > 1024)
523 printk(KERN_ERR "%s: invalid xres %d\n",
524 fbi->fb.fix.id, var->xres);
525 switch(var->bits_per_pixel) {
526 case 1:
527 case 2:
528 case 4:
529 case 8:
530 case 16:
531 break;
532 default:
533 printk(KERN_ERR "%s: invalid bit depth %d\n",
534 fbi->fb.fix.id, var->bits_per_pixel);
535 break;
536 }
537 if (var->hsync_len < 1 || var->hsync_len > 64)
538 printk(KERN_ERR "%s: invalid hsync_len %d\n",
539 fbi->fb.fix.id, var->hsync_len);
540 if (var->left_margin < 1 || var->left_margin > 255)
541 printk(KERN_ERR "%s: invalid left_margin %d\n",
542 fbi->fb.fix.id, var->left_margin);
543 if (var->right_margin < 1 || var->right_margin > 255)
544 printk(KERN_ERR "%s: invalid right_margin %d\n",
545 fbi->fb.fix.id, var->right_margin);
546 if (var->yres < 1 || var->yres > 1024)
547 printk(KERN_ERR "%s: invalid yres %d\n",
548 fbi->fb.fix.id, var->yres);
549 if (var->vsync_len < 1 || var->vsync_len > 64)
550 printk(KERN_ERR "%s: invalid vsync_len %d\n",
551 fbi->fb.fix.id, var->vsync_len);
552 if (var->upper_margin < 0 || var->upper_margin > 255)
553 printk(KERN_ERR "%s: invalid upper_margin %d\n",
554 fbi->fb.fix.id, var->upper_margin);
555 if (var->lower_margin < 0 || var->lower_margin > 255)
556 printk(KERN_ERR "%s: invalid lower_margin %d\n",
557 fbi->fb.fix.id, var->lower_margin);
558#endif
559
560 new_regs.lccr0 = fbi->lccr0 |
561 (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
562 LCCR0_QDM | LCCR0_BM | LCCR0_OUM);
563
564 new_regs.lccr1 =
565 LCCR1_DisWdth(var->xres) +
566 LCCR1_HorSnchWdth(var->hsync_len) +
567 LCCR1_BegLnDel(var->left_margin) +
568 LCCR1_EndLnDel(var->right_margin);
569
570 /*
571 * If we have a dual scan LCD, we need to halve
572 * the YRES parameter.
573 */
574 lines_per_panel = var->yres;
575 if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
576 lines_per_panel /= 2;
577
578 new_regs.lccr2 =
579 LCCR2_DisHght(lines_per_panel) +
580 LCCR2_VrtSnchWdth(var->vsync_len) +
581 LCCR2_BegFrmDel(var->upper_margin) +
582 LCCR2_EndFrmDel(var->lower_margin);
583
584 new_regs.lccr3 = fbi->lccr3 |
585 pxafb_bpp_to_lccr3(var) |
586 (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
587 (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
588
589 if (pcd)
590 new_regs.lccr3 |= LCCR3_PixClkDiv(pcd);
591
592 DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0);
593 DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1);
594 DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2);
595 DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3);
596
597 /* Update shadow copy atomically */
598 local_irq_save(flags);
599
600 /* setup dma descriptors */
601 fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16);
602 fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16);
603 fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16);
604
605 fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16;
606 fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
607 fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
608
609#define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
610
611 /* populate descriptors */
612 fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
613 fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL;
614 fbi->dmadesc_fblow_cpu->fidr = 0;
615 fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL;
616
617 fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */
618
619 fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
620 fbi->dmadesc_fbhigh_cpu->fidr = 0;
621 fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
622
623 fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
624 fbi->dmadesc_palette_cpu->fidr = 0;
625 fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
626
627 if (var->bits_per_pixel == 16) {
628 /* palette shouldn't be loaded in true-color mode */
629 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
630 fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
631 /* init it to something, even though we won't be using it */
632 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma;
633 } else {
634 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
635 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma;
636 fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */
637 }
638
639#if 0
640 DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu);
641 DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu);
642 DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu);
643 DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma);
644 DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma);
645 DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma);
646
647 DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr);
648 DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr);
649 DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr);
650
651 DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr);
652 DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr);
653 DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr);
654
655 DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd);
656 DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd);
657 DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd);
658#endif
659
660 fbi->reg_lccr0 = new_regs.lccr0;
661 fbi->reg_lccr1 = new_regs.lccr1;
662 fbi->reg_lccr2 = new_regs.lccr2;
663 fbi->reg_lccr3 = new_regs.lccr3;
Richard Purdieba44cd22005-09-09 13:10:03 -0700664 set_hsync_time(fbi, pcd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700665 local_irq_restore(flags);
666
667 /*
668 * Only update the registers if the controller is enabled
669 * and something has changed.
670 */
671 if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
672 (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
673 (FDADR0 != fbi->fdadr0) || (FDADR1 != fbi->fdadr1))
674 pxafb_schedule_work(fbi, C_REENABLE);
675
676 return 0;
677}
678
679/*
680 * NOTE! The following functions are purely helpers for set_ctrlr_state.
681 * Do not call them directly; set_ctrlr_state does the correct serialisation
682 * to ensure that things happen in the right way 100% of time time.
683 * -- rmk
684 */
685static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
686{
687 DPRINTK("backlight o%s\n", on ? "n" : "ff");
688
689 if (pxafb_backlight_power)
690 pxafb_backlight_power(on);
691}
692
693static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
694{
695 DPRINTK("LCD power o%s\n", on ? "n" : "ff");
696
697 if (pxafb_lcd_power)
698 pxafb_lcd_power(on);
699}
700
701static void pxafb_setup_gpio(struct pxafb_info *fbi)
702{
703 int gpio, ldd_bits;
704 unsigned int lccr0 = fbi->lccr0;
705
706 /*
707 * setup is based on type of panel supported
708 */
709
710 /* 4 bit interface */
711 if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
712 (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
713 (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
714 ldd_bits = 4;
715
716 /* 8 bit interface */
717 else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
718 ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
719 ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
720 (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
721 ldd_bits = 8;
722
723 /* 16 bit interface */
724 else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
725 ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
726 ldd_bits = 16;
727
728 else {
729 printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
730 return;
731 }
732
733 for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
734 pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
735 pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
736 pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
737 pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
738 pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
739}
740
741static void pxafb_enable_controller(struct pxafb_info *fbi)
742{
743 DPRINTK("Enabling LCD controller\n");
744 DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0);
745 DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1);
746 DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
747 DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
748 DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
749 DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
750
Nicolas Pitre8d372262005-08-10 16:45:13 +0100751 /* enable LCD controller clock */
752 pxa_set_cken(CKEN16_LCD, 1);
753
Linus Torvalds1da177e2005-04-16 15:20:36 -0700754 /* Sequence from 11.7.10 */
755 LCCR3 = fbi->reg_lccr3;
756 LCCR2 = fbi->reg_lccr2;
757 LCCR1 = fbi->reg_lccr1;
758 LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
759
760 FDADR0 = fbi->fdadr0;
761 FDADR1 = fbi->fdadr1;
762 LCCR0 |= LCCR0_ENB;
763
764 DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0);
765 DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1);
766 DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0);
767 DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1);
768 DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2);
769 DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3);
770}
771
772static void pxafb_disable_controller(struct pxafb_info *fbi)
773{
774 DECLARE_WAITQUEUE(wait, current);
775
776 DPRINTK("Disabling LCD controller\n");
777
778 set_current_state(TASK_UNINTERRUPTIBLE);
779 add_wait_queue(&fbi->ctrlr_wait, &wait);
780
781 LCSR = 0xffffffff; /* Clear LCD Status Register */
782 LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
783 LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
784
785 schedule_timeout(20 * HZ / 1000);
786 remove_wait_queue(&fbi->ctrlr_wait, &wait);
Nicolas Pitre8d372262005-08-10 16:45:13 +0100787
788 /* disable LCD controller clock */
789 pxa_set_cken(CKEN16_LCD, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700790}
791
792/*
793 * pxafb_handle_irq: Handle 'LCD DONE' interrupts.
794 */
795static irqreturn_t pxafb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
796{
797 struct pxafb_info *fbi = dev_id;
798 unsigned int lcsr = LCSR;
799
800 if (lcsr & LCSR_LDD) {
801 LCCR0 |= LCCR0_LDM;
802 wake_up(&fbi->ctrlr_wait);
803 }
804
805 LCSR = lcsr;
806 return IRQ_HANDLED;
807}
808
809/*
810 * This function must be called from task context only, since it will
811 * sleep when disabling the LCD controller, or if we get two contending
812 * processes trying to alter state.
813 */
814static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
815{
816 u_int old_state;
817
818 down(&fbi->ctrlr_sem);
819
820 old_state = fbi->state;
821
822 /*
823 * Hack around fbcon initialisation.
824 */
825 if (old_state == C_STARTUP && state == C_REENABLE)
826 state = C_ENABLE;
827
828 switch (state) {
829 case C_DISABLE_CLKCHANGE:
830 /*
831 * Disable controller for clock change. If the
832 * controller is already disabled, then do nothing.
833 */
834 if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
835 fbi->state = state;
836 //TODO __pxafb_lcd_power(fbi, 0);
837 pxafb_disable_controller(fbi);
838 }
839 break;
840
841 case C_DISABLE_PM:
842 case C_DISABLE:
843 /*
844 * Disable controller
845 */
846 if (old_state != C_DISABLE) {
847 fbi->state = state;
848 __pxafb_backlight_power(fbi, 0);
849 __pxafb_lcd_power(fbi, 0);
850 if (old_state != C_DISABLE_CLKCHANGE)
851 pxafb_disable_controller(fbi);
852 }
853 break;
854
855 case C_ENABLE_CLKCHANGE:
856 /*
857 * Enable the controller after clock change. Only
858 * do this if we were disabled for the clock change.
859 */
860 if (old_state == C_DISABLE_CLKCHANGE) {
861 fbi->state = C_ENABLE;
862 pxafb_enable_controller(fbi);
863 //TODO __pxafb_lcd_power(fbi, 1);
864 }
865 break;
866
867 case C_REENABLE:
868 /*
869 * Re-enable the controller only if it was already
870 * enabled. This is so we reprogram the control
871 * registers.
872 */
873 if (old_state == C_ENABLE) {
874 pxafb_disable_controller(fbi);
875 pxafb_setup_gpio(fbi);
876 pxafb_enable_controller(fbi);
877 }
878 break;
879
880 case C_ENABLE_PM:
881 /*
882 * Re-enable the controller after PM. This is not
883 * perfect - think about the case where we were doing
884 * a clock change, and we suspended half-way through.
885 */
886 if (old_state != C_DISABLE_PM)
887 break;
888 /* fall through */
889
890 case C_ENABLE:
891 /*
892 * Power up the LCD screen, enable controller, and
893 * turn on the backlight.
894 */
895 if (old_state != C_ENABLE) {
896 fbi->state = C_ENABLE;
897 pxafb_setup_gpio(fbi);
898 pxafb_enable_controller(fbi);
899 __pxafb_lcd_power(fbi, 1);
900 __pxafb_backlight_power(fbi, 1);
901 }
902 break;
903 }
904 up(&fbi->ctrlr_sem);
905}
906
907/*
908 * Our LCD controller task (which is called when we blank or unblank)
909 * via keventd.
910 */
911static void pxafb_task(void *dummy)
912{
913 struct pxafb_info *fbi = dummy;
914 u_int state = xchg(&fbi->task_state, -1);
915
916 set_ctrlr_state(fbi, state);
917}
918
919#ifdef CONFIG_CPU_FREQ
920/*
921 * CPU clock speed change handler. We need to adjust the LCD timing
922 * parameters when the CPU clock is adjusted by the power management
923 * subsystem.
924 *
925 * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
926 */
927static int
928pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
929{
930 struct pxafb_info *fbi = TO_INF(nb, freq_transition);
931 //TODO struct cpufreq_freqs *f = data;
932 u_int pcd;
933
934 switch (val) {
935 case CPUFREQ_PRECHANGE:
936 set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
937 break;
938
939 case CPUFREQ_POSTCHANGE:
940 pcd = get_pcd(fbi->fb.var.pixclock);
Richard Purdieba44cd22005-09-09 13:10:03 -0700941 set_hsync_time(fbi, pcd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942 fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
943 set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
944 break;
945 }
946 return 0;
947}
948
949static int
950pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
951{
952 struct pxafb_info *fbi = TO_INF(nb, freq_policy);
953 struct fb_var_screeninfo *var = &fbi->fb.var;
954 struct cpufreq_policy *policy = data;
955
956 switch (val) {
957 case CPUFREQ_ADJUST:
958 case CPUFREQ_INCOMPATIBLE:
959 printk(KERN_DEBUG "min dma period: %d ps, "
960 "new clock %d kHz\n", pxafb_display_dma_period(var),
961 policy->max);
962 // TODO: fill in min/max values
963 break;
964#if 0
965 case CPUFREQ_NOTIFY:
966 printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__);
967 do {} while(0);
968 /* todo: panic if min/max values aren't fulfilled
969 * [can't really happen unless there's a bug in the
970 * CPU policy verification process *
971 */
972 break;
973#endif
974 }
975 return 0;
976}
977#endif
978
979#ifdef CONFIG_PM
980/*
981 * Power management hooks. Note that we won't be called from IRQ context,
982 * unlike the blank functions above, so we may sleep.
983 */
Pavel Machek9bfd3542005-04-16 15:25:36 -0700984static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700985{
986 struct pxafb_info *fbi = dev_get_drvdata(dev);
987
988 if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
989 set_ctrlr_state(fbi, C_DISABLE_PM);
990 return 0;
991}
992
993static int pxafb_resume(struct device *dev, u32 level)
994{
995 struct pxafb_info *fbi = dev_get_drvdata(dev);
996
997 if (level == RESUME_ENABLE)
998 set_ctrlr_state(fbi, C_ENABLE_PM);
999 return 0;
1000}
1001#else
1002#define pxafb_suspend NULL
1003#define pxafb_resume NULL
1004#endif
1005
1006/*
1007 * pxafb_map_video_memory():
1008 * Allocates the DRAM memory for the frame buffer. This buffer is
1009 * remapped into a non-cached, non-buffered, memory region to
1010 * allow palette and pixel writes to occur without flushing the
1011 * cache. Once this area is remapped, all virtual memory
1012 * access to the video memory should occur at the new region.
1013 */
1014static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
1015{
1016 u_long palette_mem_size;
1017
1018 /*
1019 * We reserve one page for the palette, plus the size
1020 * of the framebuffer.
1021 */
1022 fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
1023 fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
1024 &fbi->map_dma, GFP_KERNEL);
1025
1026 if (fbi->map_cpu) {
1027 /* prevent initial garbage on screen */
1028 memset(fbi->map_cpu, 0, fbi->map_size);
1029 fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
1030 fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
1031 /*
1032 * FIXME: this is actually the wrong thing to place in
1033 * smem_start. But fbdev suffers from the problem that
1034 * it needs an API which doesn't exist (in this case,
1035 * dma_writecombine_mmap)
1036 */
1037 fbi->fb.fix.smem_start = fbi->screen_dma;
1038
1039 fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
1040
1041 palette_mem_size = fbi->palette_size * sizeof(u16);
1042 DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
1043
1044 fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
1045 fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
1046 }
1047
1048 return fbi->map_cpu ? 0 : -ENOMEM;
1049}
1050
1051static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
1052{
1053 struct pxafb_info *fbi;
1054 void *addr;
1055 struct pxafb_mach_info *inf = dev->platform_data;
1056
1057 /* Alloc the pxafb_info and pseudo_palette in one step */
1058 fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
1059 if (!fbi)
1060 return NULL;
1061
1062 memset(fbi, 0, sizeof(struct pxafb_info));
1063 fbi->dev = dev;
1064
1065 strcpy(fbi->fb.fix.id, PXA_NAME);
1066
1067 fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
1068 fbi->fb.fix.type_aux = 0;
1069 fbi->fb.fix.xpanstep = 0;
1070 fbi->fb.fix.ypanstep = 0;
1071 fbi->fb.fix.ywrapstep = 0;
1072 fbi->fb.fix.accel = FB_ACCEL_NONE;
1073
1074 fbi->fb.var.nonstd = 0;
1075 fbi->fb.var.activate = FB_ACTIVATE_NOW;
1076 fbi->fb.var.height = -1;
1077 fbi->fb.var.width = -1;
1078 fbi->fb.var.accel_flags = 0;
1079 fbi->fb.var.vmode = FB_VMODE_NONINTERLACED;
1080
1081 fbi->fb.fbops = &pxafb_ops;
1082 fbi->fb.flags = FBINFO_DEFAULT;
1083 fbi->fb.node = -1;
1084
1085 addr = fbi;
1086 addr = addr + sizeof(struct pxafb_info);
1087 fbi->fb.pseudo_palette = addr;
1088
1089 fbi->max_xres = inf->xres;
1090 fbi->fb.var.xres = inf->xres;
1091 fbi->fb.var.xres_virtual = inf->xres;
1092 fbi->max_yres = inf->yres;
1093 fbi->fb.var.yres = inf->yres;
1094 fbi->fb.var.yres_virtual = inf->yres;
1095 fbi->max_bpp = inf->bpp;
1096 fbi->fb.var.bits_per_pixel = inf->bpp;
1097 fbi->fb.var.pixclock = inf->pixclock;
1098 fbi->fb.var.hsync_len = inf->hsync_len;
1099 fbi->fb.var.left_margin = inf->left_margin;
1100 fbi->fb.var.right_margin = inf->right_margin;
1101 fbi->fb.var.vsync_len = inf->vsync_len;
1102 fbi->fb.var.upper_margin = inf->upper_margin;
1103 fbi->fb.var.lower_margin = inf->lower_margin;
1104 fbi->fb.var.sync = inf->sync;
1105 fbi->fb.var.grayscale = inf->cmap_greyscale;
1106 fbi->cmap_inverse = inf->cmap_inverse;
1107 fbi->cmap_static = inf->cmap_static;
1108 fbi->lccr0 = inf->lccr0;
1109 fbi->lccr3 = inf->lccr3;
1110 fbi->state = C_STARTUP;
1111 fbi->task_state = (u_char)-1;
1112 fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
1113 fbi->max_bpp / 8;
1114
1115 init_waitqueue_head(&fbi->ctrlr_wait);
1116 INIT_WORK(&fbi->task, pxafb_task, fbi);
1117 init_MUTEX(&fbi->ctrlr_sem);
1118
1119 return fbi;
1120}
1121
1122#ifdef CONFIG_FB_PXA_PARAMETERS
1123static int __init pxafb_parse_options(struct device *dev, char *options)
1124{
1125 struct pxafb_mach_info *inf = dev->platform_data;
1126 char *this_opt;
1127
1128 if (!options || !*options)
1129 return 0;
1130
1131 dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
1132
1133 /* could be made table driven or similar?... */
1134 while ((this_opt = strsep(&options, ",")) != NULL) {
1135 if (!strncmp(this_opt, "mode:", 5)) {
1136 const char *name = this_opt+5;
1137 unsigned int namelen = strlen(name);
1138 int res_specified = 0, bpp_specified = 0;
1139 unsigned int xres = 0, yres = 0, bpp = 0;
1140 int yres_specified = 0;
1141 int i;
1142 for (i = namelen-1; i >= 0; i--) {
1143 switch (name[i]) {
1144 case '-':
1145 namelen = i;
1146 if (!bpp_specified && !yres_specified) {
1147 bpp = simple_strtoul(&name[i+1], NULL, 0);
1148 bpp_specified = 1;
1149 } else
1150 goto done;
1151 break;
1152 case 'x':
1153 if (!yres_specified) {
1154 yres = simple_strtoul(&name[i+1], NULL, 0);
1155 yres_specified = 1;
1156 } else
1157 goto done;
1158 break;
1159 case '0'...'9':
1160 break;
1161 default:
1162 goto done;
1163 }
1164 }
1165 if (i < 0 && yres_specified) {
1166 xres = simple_strtoul(name, NULL, 0);
1167 res_specified = 1;
1168 }
1169 done:
1170 if (res_specified) {
1171 dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
1172 inf->xres = xres; inf->yres = yres;
1173 }
1174 if (bpp_specified)
1175 switch (bpp) {
1176 case 1:
1177 case 2:
1178 case 4:
1179 case 8:
1180 case 16:
1181 inf->bpp = bpp;
1182 dev_info(dev, "overriding bit depth: %d\n", bpp);
1183 break;
1184 default:
1185 dev_err(dev, "Depth %d is not valid\n", bpp);
1186 }
1187 } else if (!strncmp(this_opt, "pixclock:", 9)) {
1188 inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
1189 dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
1190 } else if (!strncmp(this_opt, "left:", 5)) {
1191 inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
1192 dev_info(dev, "override left: %u\n", inf->left_margin);
1193 } else if (!strncmp(this_opt, "right:", 6)) {
1194 inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
1195 dev_info(dev, "override right: %u\n", inf->right_margin);
1196 } else if (!strncmp(this_opt, "upper:", 6)) {
1197 inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
1198 dev_info(dev, "override upper: %u\n", inf->upper_margin);
1199 } else if (!strncmp(this_opt, "lower:", 6)) {
1200 inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
1201 dev_info(dev, "override lower: %u\n", inf->lower_margin);
1202 } else if (!strncmp(this_opt, "hsynclen:", 9)) {
1203 inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
1204 dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
1205 } else if (!strncmp(this_opt, "vsynclen:", 9)) {
1206 inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
1207 dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
1208 } else if (!strncmp(this_opt, "hsync:", 6)) {
1209 if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1210 dev_info(dev, "override hsync: Active Low\n");
1211 inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
1212 } else {
1213 dev_info(dev, "override hsync: Active High\n");
1214 inf->sync |= FB_SYNC_HOR_HIGH_ACT;
1215 }
1216 } else if (!strncmp(this_opt, "vsync:", 6)) {
1217 if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1218 dev_info(dev, "override vsync: Active Low\n");
1219 inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
1220 } else {
1221 dev_info(dev, "override vsync: Active High\n");
1222 inf->sync |= FB_SYNC_VERT_HIGH_ACT;
1223 }
1224 } else if (!strncmp(this_opt, "dpc:", 4)) {
1225 if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
1226 dev_info(dev, "override double pixel clock: false\n");
1227 inf->lccr3 &= ~LCCR3_DPC;
1228 } else {
1229 dev_info(dev, "override double pixel clock: true\n");
1230 inf->lccr3 |= LCCR3_DPC;
1231 }
1232 } else if (!strncmp(this_opt, "outputen:", 9)) {
1233 if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
1234 dev_info(dev, "override output enable: active low\n");
1235 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
1236 } else {
1237 dev_info(dev, "override output enable: active high\n");
1238 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
1239 }
1240 } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
1241 if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
1242 dev_info(dev, "override pixel clock polarity: falling edge\n");
1243 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
1244 } else {
1245 dev_info(dev, "override pixel clock polarity: rising edge\n");
1246 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
1247 }
1248 } else if (!strncmp(this_opt, "color", 5)) {
1249 inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
1250 } else if (!strncmp(this_opt, "mono", 4)) {
1251 inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
1252 } else if (!strncmp(this_opt, "active", 6)) {
1253 inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
1254 } else if (!strncmp(this_opt, "passive", 7)) {
1255 inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
1256 } else if (!strncmp(this_opt, "single", 6)) {
1257 inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
1258 } else if (!strncmp(this_opt, "dual", 4)) {
1259 inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
1260 } else if (!strncmp(this_opt, "4pix", 4)) {
1261 inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
1262 } else if (!strncmp(this_opt, "8pix", 4)) {
1263 inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
1264 } else {
1265 dev_err(dev, "unknown option: %s\n", this_opt);
1266 return -EINVAL;
1267 }
1268 }
1269 return 0;
1270
1271}
1272#endif
1273
1274int __init pxafb_probe(struct device *dev)
1275{
1276 struct pxafb_info *fbi;
1277 struct pxafb_mach_info *inf;
1278 int ret;
1279
1280 dev_dbg(dev, "pxafb_probe\n");
1281
1282 inf = dev->platform_data;
1283 ret = -ENOMEM;
1284 fbi = NULL;
1285 if (!inf)
1286 goto failed;
1287
1288#ifdef CONFIG_FB_PXA_PARAMETERS
1289 ret = pxafb_parse_options(dev, g_options);
1290 if (ret < 0)
1291 goto failed;
1292#endif
1293
1294#ifdef DEBUG_VAR
1295 /* Check for various illegal bit-combinations. Currently only
1296 * a warning is given. */
1297
1298 if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
1299 dev_warn(dev, "machine LCCR0 setting contains illegal bits: %08x\n",
1300 inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
1301 if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
1302 dev_warn(dev, "machine LCCR3 setting contains illegal bits: %08x\n",
1303 inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
1304 if (inf->lccr0 & LCCR0_DPD &&
1305 ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
1306 (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
1307 (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
1308 dev_warn(dev, "Double Pixel Data (DPD) mode is only valid in passive mono"
1309 " single panel mode\n");
1310 if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
1311 (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
1312 dev_warn(dev, "Dual panel only valid in passive mode\n");
1313 if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
1314 (inf->upper_margin || inf->lower_margin))
1315 dev_warn(dev, "Upper and lower margins must be 0 in passive mode\n");
1316#endif
1317
1318 dev_dbg(dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp);
1319 if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) {
1320 dev_err(dev, "Invalid resolution or bit depth\n");
1321 ret = -EINVAL;
1322 goto failed;
1323 }
1324 pxafb_backlight_power = inf->pxafb_backlight_power;
1325 pxafb_lcd_power = inf->pxafb_lcd_power;
1326 fbi = pxafb_init_fbinfo(dev);
1327 if (!fbi) {
1328 dev_err(dev, "Failed to initialize framebuffer device\n");
1329 ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
1330 goto failed;
1331 }
1332
1333 /* Initialize video memory */
1334 ret = pxafb_map_video_memory(fbi);
1335 if (ret) {
1336 dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
1337 ret = -ENOMEM;
1338 goto failed;
1339 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340
1341 ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
1342 if (ret) {
1343 dev_err(dev, "request_irq failed: %d\n", ret);
1344 ret = -EBUSY;
1345 goto failed;
1346 }
1347
1348 /*
1349 * This makes sure that our colour bitfield
1350 * descriptors are correctly initialised.
1351 */
1352 pxafb_check_var(&fbi->fb.var, &fbi->fb);
1353 pxafb_set_par(&fbi->fb);
1354
1355 dev_set_drvdata(dev, fbi);
1356
1357 ret = register_framebuffer(&fbi->fb);
1358 if (ret < 0) {
1359 dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
1360 goto failed;
1361 }
1362
1363#ifdef CONFIG_PM
1364 // TODO
1365#endif
1366
1367#ifdef CONFIG_CPU_FREQ
1368 fbi->freq_transition.notifier_call = pxafb_freq_transition;
1369 fbi->freq_policy.notifier_call = pxafb_freq_policy;
1370 cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
1371 cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
1372#endif
1373
1374 /*
1375 * Ok, now enable the LCD controller
1376 */
1377 set_ctrlr_state(fbi, C_ENABLE);
1378
1379 return 0;
1380
1381failed:
1382 dev_set_drvdata(dev, NULL);
1383 kfree(fbi);
1384 return ret;
1385}
1386
1387static struct device_driver pxafb_driver = {
1388 .name = "pxa2xx-fb",
1389 .bus = &platform_bus_type,
1390 .probe = pxafb_probe,
1391#ifdef CONFIG_PM
1392 .suspend = pxafb_suspend,
1393 .resume = pxafb_resume,
1394#endif
1395};
1396
1397#ifndef MODULE
1398int __devinit pxafb_setup(char *options)
1399{
1400# ifdef CONFIG_FB_PXA_PARAMETERS
1401 strlcpy(g_options, options, sizeof(g_options));
1402# endif
1403 return 0;
1404}
1405#else
1406# ifdef CONFIG_FB_PXA_PARAMETERS
1407module_param_string(options, g_options, sizeof(g_options), 0);
1408MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
1409# endif
1410#endif
1411
1412int __devinit pxafb_init(void)
1413{
1414#ifndef MODULE
1415 char *option = NULL;
1416
1417 if (fb_get_options("pxafb", &option))
1418 return -ENODEV;
1419 pxafb_setup(option);
1420#endif
1421 return driver_register(&pxafb_driver);
1422}
1423
1424module_init(pxafb_init);
1425
1426MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
1427MODULE_LICENSE("GPL");