blob: 7c545d5eee4570f0cbe9c4e175db925db36344bd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Based on lm75.c and lm85.c
5 Supports adm1030 / adm1031
6 Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
7 Reworked by Jean Delvare <khali@linux-fr.org>
8
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22*/
23
24#include <linux/module.h>
25#include <linux/init.h>
26#include <linux/slab.h>
27#include <linux/jiffies.h>
28#include <linux/i2c.h>
Mark M. Hoffman943b0832005-07-15 21:39:18 -040029#include <linux/hwmon.h>
30#include <linux/err.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070031
32/* Following macros takes channel parameter starting from 0 to 2 */
33#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr))
34#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr))
35#define ADM1031_REG_PWM (0x22)
36#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr))
37
38#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4*(nr))
39#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4*(nr))
40#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4*(nr))
41
42#define ADM1031_REG_TEMP(nr) (0xa + (nr))
43#define ADM1031_REG_AUTO_TEMP(nr) (0x24 + (nr))
44
45#define ADM1031_REG_STATUS(nr) (0x2 + (nr))
46
47#define ADM1031_REG_CONF1 0x0
48#define ADM1031_REG_CONF2 0x1
49#define ADM1031_REG_EXT_TEMP 0x6
50
51#define ADM1031_CONF1_MONITOR_ENABLE 0x01 /* Monitoring enable */
52#define ADM1031_CONF1_PWM_INVERT 0x08 /* PWM Invert */
53#define ADM1031_CONF1_AUTO_MODE 0x80 /* Auto FAN */
54
55#define ADM1031_CONF2_PWM1_ENABLE 0x01
56#define ADM1031_CONF2_PWM2_ENABLE 0x02
57#define ADM1031_CONF2_TACH1_ENABLE 0x04
58#define ADM1031_CONF2_TACH2_ENABLE 0x08
59#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan))
60
61/* Addresses to scan */
62static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
Linus Torvalds1da177e2005-04-16 15:20:36 -070063
64/* Insmod parameters */
Jean Delvaref4b50262005-07-31 21:49:03 +020065I2C_CLIENT_INSMOD_2(adm1030, adm1031);
Linus Torvalds1da177e2005-04-16 15:20:36 -070066
67typedef u8 auto_chan_table_t[8][2];
68
69/* Each client has this additional data */
70struct adm1031_data {
71 struct i2c_client client;
Mark M. Hoffman943b0832005-07-15 21:39:18 -040072 struct class_device *class_dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -070073 struct semaphore update_lock;
74 int chip_type;
75 char valid; /* !=0 if following fields are valid */
76 unsigned long last_updated; /* In jiffies */
77 /* The chan_select_table contains the possible configurations for
78 * auto fan control.
79 */
80 auto_chan_table_t *chan_select_table;
81 u16 alarm;
82 u8 conf1;
83 u8 conf2;
84 u8 fan[2];
85 u8 fan_div[2];
86 u8 fan_min[2];
87 u8 pwm[2];
88 u8 old_pwm[2];
89 s8 temp[3];
90 u8 ext_temp[3];
91 u8 auto_temp[3];
92 u8 auto_temp_min[3];
93 u8 auto_temp_off[3];
94 u8 auto_temp_max[3];
95 s8 temp_min[3];
96 s8 temp_max[3];
97 s8 temp_crit[3];
98};
99
100static int adm1031_attach_adapter(struct i2c_adapter *adapter);
101static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
102static void adm1031_init_client(struct i2c_client *client);
103static int adm1031_detach_client(struct i2c_client *client);
104static struct adm1031_data *adm1031_update_device(struct device *dev);
105
106/* This is the driver that will be inserted */
107static struct i2c_driver adm1031_driver = {
108 .owner = THIS_MODULE,
109 .name = "adm1031",
110 .flags = I2C_DF_NOTIFY,
111 .attach_adapter = adm1031_attach_adapter,
112 .detach_client = adm1031_detach_client,
113};
114
115static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
116{
117 return i2c_smbus_read_byte_data(client, reg);
118}
119
120static inline int
121adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
122{
123 return i2c_smbus_write_byte_data(client, reg, value);
124}
125
126
127#define TEMP_TO_REG(val) (((val) < 0 ? ((val - 500) / 1000) : \
128 ((val + 500) / 1000)))
129
130#define TEMP_FROM_REG(val) ((val) * 1000)
131
132#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125)
133
134#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
135
136static int FAN_TO_REG(int reg, int div)
137{
138 int tmp;
139 tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
140 return tmp > 255 ? 255 : tmp;
141}
142
143#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6))
144
145#define PWM_TO_REG(val) (SENSORS_LIMIT((val), 0, 255) >> 4)
146#define PWM_FROM_REG(val) ((val) << 4)
147
148#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7)
149#define FAN_CHAN_TO_REG(val, reg) \
150 (((reg) & 0x1F) | (((val) << 5) & 0xe0))
151
152#define AUTO_TEMP_MIN_TO_REG(val, reg) \
153 ((((val)/500) & 0xf8)|((reg) & 0x7))
154#define AUTO_TEMP_RANGE_FROM_REG(reg) (5000 * (1<< ((reg)&0x7)))
155#define AUTO_TEMP_MIN_FROM_REG(reg) (1000 * ((((reg) >> 3) & 0x1f) << 2))
156
157#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2)
158
159#define AUTO_TEMP_OFF_FROM_REG(reg) \
160 (AUTO_TEMP_MIN_FROM_REG(reg) - 5000)
161
162#define AUTO_TEMP_MAX_FROM_REG(reg) \
163 (AUTO_TEMP_RANGE_FROM_REG(reg) + \
164 AUTO_TEMP_MIN_FROM_REG(reg))
165
166static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
167{
168 int ret;
169 int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
170
171 range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
172 ret = ((reg & 0xf8) |
173 (range < 10000 ? 0 :
174 range < 20000 ? 1 :
175 range < 40000 ? 2 : range < 80000 ? 3 : 4));
176 return ret;
177}
178
179/* FAN auto control */
180#define GET_FAN_AUTO_BITFIELD(data, idx) \
181 (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
182
183/* The tables below contains the possible values for the auto fan
184 * control bitfields. the index in the table is the register value.
185 * MSb is the auto fan control enable bit, so the four first entries
186 * in the table disables auto fan control when both bitfields are zero.
187 */
188static auto_chan_table_t auto_channel_select_table_adm1031 = {
189 {0, 0}, {0, 0}, {0, 0}, {0, 0},
190 {2 /*0b010 */ , 4 /*0b100 */ },
191 {2 /*0b010 */ , 2 /*0b010 */ },
192 {4 /*0b100 */ , 4 /*0b100 */ },
193 {7 /*0b111 */ , 7 /*0b111 */ },
194};
195
196static auto_chan_table_t auto_channel_select_table_adm1030 = {
197 {0, 0}, {0, 0}, {0, 0}, {0, 0},
198 {2 /*0b10 */ , 0},
199 {0xff /*invalid */ , 0},
200 {0xff /*invalid */ , 0},
201 {3 /*0b11 */ , 0},
202};
203
204/* That function checks if a bitfield is valid and returns the other bitfield
205 * nearest match if no exact match where found.
206 */
207static int
208get_fan_auto_nearest(struct adm1031_data *data,
209 int chan, u8 val, u8 reg, u8 * new_reg)
210{
211 int i;
212 int first_match = -1, exact_match = -1;
213 u8 other_reg_val =
214 (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
215
216 if (val == 0) {
217 *new_reg = 0;
218 return 0;
219 }
220
221 for (i = 0; i < 8; i++) {
222 if ((val == (*data->chan_select_table)[i][chan]) &&
223 ((*data->chan_select_table)[i][chan ? 0 : 1] ==
224 other_reg_val)) {
225 /* We found an exact match */
226 exact_match = i;
227 break;
228 } else if (val == (*data->chan_select_table)[i][chan] &&
229 first_match == -1) {
230 /* Save the first match in case of an exact match has not been
231 * found
232 */
233 first_match = i;
234 }
235 }
236
237 if (exact_match >= 0) {
238 *new_reg = exact_match;
239 } else if (first_match >= 0) {
240 *new_reg = first_match;
241 } else {
242 return -EINVAL;
243 }
244 return 0;
245}
246
247static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr)
248{
249 struct adm1031_data *data = adm1031_update_device(dev);
250 return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
251}
252
253static ssize_t
254set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
255{
256 struct i2c_client *client = to_i2c_client(dev);
257 struct adm1031_data *data = i2c_get_clientdata(client);
258 int val = simple_strtol(buf, NULL, 10);
259 u8 reg;
260 int ret;
261 u8 old_fan_mode;
262
263 old_fan_mode = data->conf1;
264
265 down(&data->update_lock);
266
267 if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
268 up(&data->update_lock);
269 return ret;
270 }
271 if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^
272 (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
273 if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
274 /* Switch to Auto Fan Mode
275 * Save PWM registers
276 * Set PWM registers to 33% Both */
277 data->old_pwm[0] = data->pwm[0];
278 data->old_pwm[1] = data->pwm[1];
279 adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
280 } else {
281 /* Switch to Manual Mode */
282 data->pwm[0] = data->old_pwm[0];
283 data->pwm[1] = data->old_pwm[1];
284 /* Restore PWM registers */
285 adm1031_write_value(client, ADM1031_REG_PWM,
286 data->pwm[0] | (data->pwm[1] << 4));
287 }
288 }
289 data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
290 adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
291 up(&data->update_lock);
292 return count;
293}
294
295#define fan_auto_channel_offset(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400296static ssize_t show_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297{ \
298 return show_fan_auto_channel(dev, buf, offset - 1); \
299} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400300static ssize_t set_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301 const char *buf, size_t count) \
302{ \
303 return set_fan_auto_channel(dev, buf, count, offset - 1); \
304} \
305static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR, \
306 show_fan_auto_channel_##offset, \
307 set_fan_auto_channel_##offset)
308
309fan_auto_channel_offset(1);
310fan_auto_channel_offset(2);
311
312/* Auto Temps */
313static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
314{
315 struct adm1031_data *data = adm1031_update_device(dev);
316 return sprintf(buf, "%d\n",
317 AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
318}
319static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
320{
321 struct adm1031_data *data = adm1031_update_device(dev);
322 return sprintf(buf, "%d\n",
323 AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
324}
325static ssize_t
326set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr)
327{
328 struct i2c_client *client = to_i2c_client(dev);
329 struct adm1031_data *data = i2c_get_clientdata(client);
330 int val = simple_strtol(buf, NULL, 10);
331
332 down(&data->update_lock);
333 data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
334 adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
335 data->auto_temp[nr]);
336 up(&data->update_lock);
337 return count;
338}
339static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
340{
341 struct adm1031_data *data = adm1031_update_device(dev);
342 return sprintf(buf, "%d\n",
343 AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
344}
345static ssize_t
346set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr)
347{
348 struct i2c_client *client = to_i2c_client(dev);
349 struct adm1031_data *data = i2c_get_clientdata(client);
350 int val = simple_strtol(buf, NULL, 10);
351
352 down(&data->update_lock);
353 data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
354 adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
355 data->temp_max[nr]);
356 up(&data->update_lock);
357 return count;
358}
359
360#define auto_temp_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400361static ssize_t show_auto_temp_##offset##_off (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362{ \
363 return show_auto_temp_off(dev, buf, offset - 1); \
364} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400365static ssize_t show_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366{ \
367 return show_auto_temp_min(dev, buf, offset - 1); \
368} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400369static ssize_t show_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700370{ \
371 return show_auto_temp_max(dev, buf, offset - 1); \
372} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400373static ssize_t set_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374 const char *buf, size_t count) \
375{ \
376 return set_auto_temp_min(dev, buf, count, offset - 1); \
377} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400378static ssize_t set_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379 const char *buf, size_t count) \
380{ \
381 return set_auto_temp_max(dev, buf, count, offset - 1); \
382} \
383static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO, \
384 show_auto_temp_##offset##_off, NULL); \
385static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR, \
386 show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\
387static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR, \
388 show_auto_temp_##offset##_max, set_auto_temp_##offset##_max)
389
390auto_temp_reg(1);
391auto_temp_reg(2);
392auto_temp_reg(3);
393
394/* pwm */
395static ssize_t show_pwm(struct device *dev, char *buf, int nr)
396{
397 struct adm1031_data *data = adm1031_update_device(dev);
398 return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
399}
400static ssize_t
401set_pwm(struct device *dev, const char *buf, size_t count, int nr)
402{
403 struct i2c_client *client = to_i2c_client(dev);
404 struct adm1031_data *data = i2c_get_clientdata(client);
405 int val = simple_strtol(buf, NULL, 10);
406 int reg;
407
408 down(&data->update_lock);
409 if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) &&
410 (((val>>4) & 0xf) != 5)) {
411 /* In automatic mode, the only PWM accepted is 33% */
412 up(&data->update_lock);
413 return -EINVAL;
414 }
415 data->pwm[nr] = PWM_TO_REG(val);
416 reg = adm1031_read_value(client, ADM1031_REG_PWM);
417 adm1031_write_value(client, ADM1031_REG_PWM,
418 nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
419 : (data->pwm[nr] & 0xf) | (reg & 0xf0));
420 up(&data->update_lock);
421 return count;
422}
423
424#define pwm_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400425static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426{ \
427 return show_pwm(dev, buf, offset - 1); \
428} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400429static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700430 const char *buf, size_t count) \
431{ \
432 return set_pwm(dev, buf, count, offset - 1); \
433} \
434static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
435 show_pwm_##offset, set_pwm_##offset)
436
437pwm_reg(1);
438pwm_reg(2);
439
440/* Fans */
441
442/*
443 * That function checks the cases where the fan reading is not
Steven Cole44bbe872005-05-03 18:21:25 -0600444 * relevant. It is used to provide 0 as fan reading when the fan is
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445 * not supposed to run
446 */
447static int trust_fan_readings(struct adm1031_data *data, int chan)
448{
449 int res = 0;
450
451 if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
452 switch (data->conf1 & 0x60) {
453 case 0x00: /* remote temp1 controls fan1 remote temp2 controls fan2 */
454 res = data->temp[chan+1] >=
455 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
456 break;
457 case 0x20: /* remote temp1 controls both fans */
458 res =
459 data->temp[1] >=
460 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
461 break;
462 case 0x40: /* remote temp2 controls both fans */
463 res =
464 data->temp[2] >=
465 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
466 break;
467 case 0x60: /* max controls both fans */
468 res =
469 data->temp[0] >=
470 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
471 || data->temp[1] >=
472 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
473 || (data->chip_type == adm1031
474 && data->temp[2] >=
475 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
476 break;
477 }
478 } else {
479 res = data->pwm[chan] > 0;
480 }
481 return res;
482}
483
484
485static ssize_t show_fan(struct device *dev, char *buf, int nr)
486{
487 struct adm1031_data *data = adm1031_update_device(dev);
488 int value;
489
490 value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
491 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
492 return sprintf(buf, "%d\n", value);
493}
494
495static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
496{
497 struct adm1031_data *data = adm1031_update_device(dev);
498 return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
499}
500static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
501{
502 struct adm1031_data *data = adm1031_update_device(dev);
503 return sprintf(buf, "%d\n",
504 FAN_FROM_REG(data->fan_min[nr],
505 FAN_DIV_FROM_REG(data->fan_div[nr])));
506}
507static ssize_t
508set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
509{
510 struct i2c_client *client = to_i2c_client(dev);
511 struct adm1031_data *data = i2c_get_clientdata(client);
512 int val = simple_strtol(buf, NULL, 10);
513
514 down(&data->update_lock);
515 if (val) {
516 data->fan_min[nr] =
517 FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
518 } else {
519 data->fan_min[nr] = 0xff;
520 }
521 adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
522 up(&data->update_lock);
523 return count;
524}
525static ssize_t
526set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
527{
528 struct i2c_client *client = to_i2c_client(dev);
529 struct adm1031_data *data = i2c_get_clientdata(client);
530 int val = simple_strtol(buf, NULL, 10);
531 u8 tmp;
532 int old_div;
533 int new_min;
534
535 tmp = val == 8 ? 0xc0 :
536 val == 4 ? 0x80 :
537 val == 2 ? 0x40 :
538 val == 1 ? 0x00 :
539 0xff;
540 if (tmp == 0xff)
541 return -EINVAL;
542
543 down(&data->update_lock);
544 old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
545 data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
546 new_min = data->fan_min[nr] * old_div /
547 FAN_DIV_FROM_REG(data->fan_div[nr]);
548 data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
549 data->fan[nr] = data->fan[nr] * old_div /
550 FAN_DIV_FROM_REG(data->fan_div[nr]);
551
552 adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr),
553 data->fan_div[nr]);
554 adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr),
555 data->fan_min[nr]);
556 up(&data->update_lock);
557 return count;
558}
559
560#define fan_offset(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400561static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700562{ \
563 return show_fan(dev, buf, offset - 1); \
564} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400565static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566{ \
567 return show_fan_min(dev, buf, offset - 1); \
568} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400569static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570{ \
571 return show_fan_div(dev, buf, offset - 1); \
572} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400573static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574 const char *buf, size_t count) \
575{ \
576 return set_fan_min(dev, buf, count, offset - 1); \
577} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400578static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 const char *buf, size_t count) \
580{ \
581 return set_fan_div(dev, buf, count, offset - 1); \
582} \
583static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \
584 NULL); \
585static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
586 show_fan_##offset##_min, set_fan_##offset##_min); \
587static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
588 show_fan_##offset##_div, set_fan_##offset##_div); \
589static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR, \
590 show_pwm_##offset, set_pwm_##offset)
591
592fan_offset(1);
593fan_offset(2);
594
595
596/* Temps */
597static ssize_t show_temp(struct device *dev, char *buf, int nr)
598{
599 struct adm1031_data *data = adm1031_update_device(dev);
600 int ext;
601 ext = nr == 0 ?
602 ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
603 (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
604 return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
605}
606static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
607{
608 struct adm1031_data *data = adm1031_update_device(dev);
609 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
610}
611static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
612{
613 struct adm1031_data *data = adm1031_update_device(dev);
614 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
615}
616static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
617{
618 struct adm1031_data *data = adm1031_update_device(dev);
619 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
620}
621static ssize_t
622set_temp_min(struct device *dev, const char *buf, size_t count, int nr)
623{
624 struct i2c_client *client = to_i2c_client(dev);
625 struct adm1031_data *data = i2c_get_clientdata(client);
626 int val;
627
628 val = simple_strtol(buf, NULL, 10);
629 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
630 down(&data->update_lock);
631 data->temp_min[nr] = TEMP_TO_REG(val);
632 adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
633 data->temp_min[nr]);
634 up(&data->update_lock);
635 return count;
636}
637static ssize_t
638set_temp_max(struct device *dev, const char *buf, size_t count, int nr)
639{
640 struct i2c_client *client = to_i2c_client(dev);
641 struct adm1031_data *data = i2c_get_clientdata(client);
642 int val;
643
644 val = simple_strtol(buf, NULL, 10);
645 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
646 down(&data->update_lock);
647 data->temp_max[nr] = TEMP_TO_REG(val);
648 adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
649 data->temp_max[nr]);
650 up(&data->update_lock);
651 return count;
652}
653static ssize_t
654set_temp_crit(struct device *dev, const char *buf, size_t count, int nr)
655{
656 struct i2c_client *client = to_i2c_client(dev);
657 struct adm1031_data *data = i2c_get_clientdata(client);
658 int val;
659
660 val = simple_strtol(buf, NULL, 10);
661 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
662 down(&data->update_lock);
663 data->temp_crit[nr] = TEMP_TO_REG(val);
664 adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
665 data->temp_crit[nr]);
666 up(&data->update_lock);
667 return count;
668}
669
670#define temp_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400671static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700672{ \
673 return show_temp(dev, buf, offset - 1); \
674} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400675static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700676{ \
677 return show_temp_min(dev, buf, offset - 1); \
678} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400679static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680{ \
681 return show_temp_max(dev, buf, offset - 1); \
682} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400683static ssize_t show_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700684{ \
685 return show_temp_crit(dev, buf, offset - 1); \
686} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400687static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700688 const char *buf, size_t count) \
689{ \
690 return set_temp_min(dev, buf, count, offset - 1); \
691} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400692static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 const char *buf, size_t count) \
694{ \
695 return set_temp_max(dev, buf, count, offset - 1); \
696} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400697static ssize_t set_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 const char *buf, size_t count) \
699{ \
700 return set_temp_crit(dev, buf, count, offset - 1); \
701} \
702static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \
703 NULL); \
704static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
705 show_temp_##offset##_min, set_temp_##offset##_min); \
706static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
707 show_temp_##offset##_max, set_temp_##offset##_max); \
708static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \
709 show_temp_##offset##_crit, set_temp_##offset##_crit)
710
711temp_reg(1);
712temp_reg(2);
713temp_reg(3);
714
715/* Alarms */
Yani Ioannou30f74292005-05-17 06:41:35 -0400716static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700717{
718 struct adm1031_data *data = adm1031_update_device(dev);
719 return sprintf(buf, "%d\n", data->alarm);
720}
721
722static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
723
724
725static int adm1031_attach_adapter(struct i2c_adapter *adapter)
726{
727 if (!(adapter->class & I2C_CLASS_HWMON))
728 return 0;
Jean Delvare2ed2dc32005-07-31 21:42:02 +0200729 return i2c_probe(adapter, &addr_data, adm1031_detect);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730}
731
Jean Delvare2ed2dc32005-07-31 21:42:02 +0200732/* This function is called by i2c_probe */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
734{
735 struct i2c_client *new_client;
736 struct adm1031_data *data;
737 int err = 0;
738 const char *name = "";
739
740 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
741 goto exit;
742
Deepak Saxenaba9c2e82005-10-17 23:08:32 +0200743 if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744 err = -ENOMEM;
745 goto exit;
746 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700747
748 new_client = &data->client;
749 i2c_set_clientdata(new_client, data);
750 new_client->addr = address;
751 new_client->adapter = adapter;
752 new_client->driver = &adm1031_driver;
753 new_client->flags = 0;
754
755 if (kind < 0) {
756 int id, co;
757 id = i2c_smbus_read_byte_data(new_client, 0x3d);
758 co = i2c_smbus_read_byte_data(new_client, 0x3e);
759
760 if (!((id == 0x31 || id == 0x30) && co == 0x41))
761 goto exit_free;
762 kind = (id == 0x30) ? adm1030 : adm1031;
763 }
764
765 if (kind <= 0)
766 kind = adm1031;
767
768 /* Given the detected chip type, set the chip name and the
769 * auto fan control helper table. */
770 if (kind == adm1030) {
771 name = "adm1030";
772 data->chan_select_table = &auto_channel_select_table_adm1030;
773 } else if (kind == adm1031) {
774 name = "adm1031";
775 data->chan_select_table = &auto_channel_select_table_adm1031;
776 }
777 data->chip_type = kind;
778
779 strlcpy(new_client->name, name, I2C_NAME_SIZE);
780 data->valid = 0;
781 init_MUTEX(&data->update_lock);
782
783 /* Tell the I2C layer a new client has arrived */
784 if ((err = i2c_attach_client(new_client)))
785 goto exit_free;
786
787 /* Initialize the ADM1031 chip */
788 adm1031_init_client(new_client);
789
790 /* Register sysfs hooks */
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400791 data->class_dev = hwmon_device_register(&new_client->dev);
792 if (IS_ERR(data->class_dev)) {
793 err = PTR_ERR(data->class_dev);
794 goto exit_detach;
795 }
796
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 device_create_file(&new_client->dev, &dev_attr_fan1_input);
798 device_create_file(&new_client->dev, &dev_attr_fan1_div);
799 device_create_file(&new_client->dev, &dev_attr_fan1_min);
800 device_create_file(&new_client->dev, &dev_attr_pwm1);
801 device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel);
802 device_create_file(&new_client->dev, &dev_attr_temp1_input);
803 device_create_file(&new_client->dev, &dev_attr_temp1_min);
804 device_create_file(&new_client->dev, &dev_attr_temp1_max);
805 device_create_file(&new_client->dev, &dev_attr_temp1_crit);
806 device_create_file(&new_client->dev, &dev_attr_temp2_input);
807 device_create_file(&new_client->dev, &dev_attr_temp2_min);
808 device_create_file(&new_client->dev, &dev_attr_temp2_max);
809 device_create_file(&new_client->dev, &dev_attr_temp2_crit);
810
811 device_create_file(&new_client->dev, &dev_attr_auto_temp1_off);
812 device_create_file(&new_client->dev, &dev_attr_auto_temp1_min);
813 device_create_file(&new_client->dev, &dev_attr_auto_temp1_max);
814
815 device_create_file(&new_client->dev, &dev_attr_auto_temp2_off);
816 device_create_file(&new_client->dev, &dev_attr_auto_temp2_min);
817 device_create_file(&new_client->dev, &dev_attr_auto_temp2_max);
818
819 device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm);
820
821 device_create_file(&new_client->dev, &dev_attr_alarms);
822
823 if (kind == adm1031) {
824 device_create_file(&new_client->dev, &dev_attr_fan2_input);
825 device_create_file(&new_client->dev, &dev_attr_fan2_div);
826 device_create_file(&new_client->dev, &dev_attr_fan2_min);
827 device_create_file(&new_client->dev, &dev_attr_pwm2);
828 device_create_file(&new_client->dev,
829 &dev_attr_auto_fan2_channel);
830 device_create_file(&new_client->dev, &dev_attr_temp3_input);
831 device_create_file(&new_client->dev, &dev_attr_temp3_min);
832 device_create_file(&new_client->dev, &dev_attr_temp3_max);
833 device_create_file(&new_client->dev, &dev_attr_temp3_crit);
834 device_create_file(&new_client->dev, &dev_attr_auto_temp3_off);
835 device_create_file(&new_client->dev, &dev_attr_auto_temp3_min);
836 device_create_file(&new_client->dev, &dev_attr_auto_temp3_max);
837 device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm);
838 }
839
840 return 0;
841
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400842exit_detach:
843 i2c_detach_client(new_client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700844exit_free:
Alexey Dobriyan1f57ff82005-08-26 01:49:14 +0400845 kfree(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846exit:
847 return err;
848}
849
850static int adm1031_detach_client(struct i2c_client *client)
851{
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400852 struct adm1031_data *data = i2c_get_clientdata(client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700853 int ret;
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400854
855 hwmon_device_unregister(data->class_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700856 if ((ret = i2c_detach_client(client)) != 0) {
857 return ret;
858 }
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400859 kfree(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860 return 0;
861}
862
863static void adm1031_init_client(struct i2c_client *client)
864{
865 unsigned int read_val;
866 unsigned int mask;
867 struct adm1031_data *data = i2c_get_clientdata(client);
868
869 mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
870 if (data->chip_type == adm1031) {
871 mask |= (ADM1031_CONF2_PWM2_ENABLE |
872 ADM1031_CONF2_TACH2_ENABLE);
873 }
874 /* Initialize the ADM1031 chip (enables fan speed reading ) */
875 read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
876 if ((read_val | mask) != read_val) {
877 adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);
878 }
879
880 read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
881 if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
882 adm1031_write_value(client, ADM1031_REG_CONF1, read_val |
883 ADM1031_CONF1_MONITOR_ENABLE);
884 }
885
886}
887
888static struct adm1031_data *adm1031_update_device(struct device *dev)
889{
890 struct i2c_client *client = to_i2c_client(dev);
891 struct adm1031_data *data = i2c_get_clientdata(client);
892 int chan;
893
894 down(&data->update_lock);
895
896 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
897 || !data->valid) {
898
899 dev_dbg(&client->dev, "Starting adm1031 update\n");
900 for (chan = 0;
901 chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
902 u8 oldh, newh;
903
904 oldh =
905 adm1031_read_value(client, ADM1031_REG_TEMP(chan));
906 data->ext_temp[chan] =
907 adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
908 newh =
909 adm1031_read_value(client, ADM1031_REG_TEMP(chan));
910 if (newh != oldh) {
911 data->ext_temp[chan] =
912 adm1031_read_value(client,
913 ADM1031_REG_EXT_TEMP);
914#ifdef DEBUG
915 oldh =
916 adm1031_read_value(client,
917 ADM1031_REG_TEMP(chan));
918
919 /* oldh is actually newer */
920 if (newh != oldh)
921 dev_warn(&client->dev,
922 "Remote temperature may be "
923 "wrong.\n");
924#endif
925 }
926 data->temp[chan] = newh;
927
928 data->temp_min[chan] =
929 adm1031_read_value(client,
930 ADM1031_REG_TEMP_MIN(chan));
931 data->temp_max[chan] =
932 adm1031_read_value(client,
933 ADM1031_REG_TEMP_MAX(chan));
934 data->temp_crit[chan] =
935 adm1031_read_value(client,
936 ADM1031_REG_TEMP_CRIT(chan));
937 data->auto_temp[chan] =
938 adm1031_read_value(client,
939 ADM1031_REG_AUTO_TEMP(chan));
940
941 }
942
943 data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
944 data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);
945
946 data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
947 | (adm1031_read_value(client, ADM1031_REG_STATUS(1))
948 << 8);
949 if (data->chip_type == adm1030) {
950 data->alarm &= 0xc0ff;
951 }
952
953 for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
954 data->fan_div[chan] =
955 adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
956 data->fan_min[chan] =
957 adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan));
958 data->fan[chan] =
959 adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
960 data->pwm[chan] =
961 0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >>
962 (4*chan));
963 }
964 data->last_updated = jiffies;
965 data->valid = 1;
966 }
967
968 up(&data->update_lock);
969
970 return data;
971}
972
973static int __init sensors_adm1031_init(void)
974{
975 return i2c_add_driver(&adm1031_driver);
976}
977
978static void __exit sensors_adm1031_exit(void)
979{
980 i2c_del_driver(&adm1031_driver);
981}
982
983MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>");
984MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
985MODULE_LICENSE("GPL");
986
987module_init(sensors_adm1031_init);
988module_exit(sensors_adm1031_exit);