blob: 4461229f56a54cf8aaa6c3df5b91bfe3aa62f519 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Madge Horizon ATM Adapter driver.
3 Copyright (C) 1995-1999 Madge Networks Ltd.
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18
19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
20 system and in the file COPYING in the Linux kernel source.
21*/
22
23/*
24 IMPORTANT NOTE: Madge Networks no longer makes the adapters
25 supported by this driver and makes no commitment to maintain it.
26*/
27
28/* too many macros - change to inline functions */
29
30#ifndef DRIVER_ATM_HORIZON_H
31#define DRIVER_ATM_HORIZON_H
32
Linus Torvalds1da177e2005-04-16 15:20:36 -070033
34#ifdef CONFIG_ATM_HORIZON_DEBUG
35#define DEBUG_HORIZON
36#endif
37
38#define DEV_LABEL "hrz"
39
40#ifndef PCI_VENDOR_ID_MADGE
41#define PCI_VENDOR_ID_MADGE 0x10B6
42#endif
43#ifndef PCI_DEVICE_ID_MADGE_HORIZON
44#define PCI_DEVICE_ID_MADGE_HORIZON 0x1000
45#endif
46
47// diagnostic output
48
49#define PRINTK(severity,format,args...) \
50 printk(severity DEV_LABEL ": " format "\n" , ## args)
51
52#ifdef DEBUG_HORIZON
53
54#define DBG_ERR 0x0001
55#define DBG_WARN 0x0002
56#define DBG_INFO 0x0004
57#define DBG_VCC 0x0008
58#define DBG_QOS 0x0010
59#define DBG_TX 0x0020
60#define DBG_RX 0x0040
61#define DBG_SKB 0x0080
62#define DBG_IRQ 0x0100
63#define DBG_FLOW 0x0200
64#define DBG_BUS 0x0400
65#define DBG_REGS 0x0800
66#define DBG_DATA 0x1000
67#define DBG_MASK 0x1fff
68
69/* the ## prevents the annoying double expansion of the macro arguments */
70/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
71#define PRINTDB(bits,format,args...) \
72 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
73#define PRINTDM(bits,format,args...) \
74 ( (debug & (bits)) ? printk (format , ## args) : 1 )
75#define PRINTDE(bits,format,args...) \
76 ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
77#define PRINTD(bits,format,args...) \
78 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
79
80#else
81
82#define PRINTD(bits,format,args...)
83#define PRINTDB(bits,format,args...)
84#define PRINTDM(bits,format,args...)
85#define PRINTDE(bits,format,args...)
86
87#endif
88
89#define PRINTDD(sec,fmt,args...)
90#define PRINTDDB(sec,fmt,args...)
91#define PRINTDDM(sec,fmt,args...)
92#define PRINTDDE(sec,fmt,args...)
93
94// fixed constants
95
96#define SPARE_BUFFER_POOL_SIZE MAX_VCS
97#define HRZ_MAX_VPI 4
98#define MIN_PCI_LATENCY 48 // 24 IS TOO SMALL
99
100/* Horizon specific bits */
101/* Register offsets */
102
103#define HRZ_IO_EXTENT 0x80
104
105#define DATA_PORT_OFF 0x00
106#define TX_CHANNEL_PORT_OFF 0x04
107#define TX_DESCRIPTOR_PORT_OFF 0x08
108#define MEMORY_PORT_OFF 0x0C
109#define MEM_WR_ADDR_REG_OFF 0x14
110#define MEM_RD_ADDR_REG_OFF 0x18
111#define CONTROL_0_REG 0x1C
112#define INT_SOURCE_REG_OFF 0x20
113#define INT_ENABLE_REG_OFF 0x24
114#define MASTER_RX_ADDR_REG_OFF 0x28
115#define MASTER_RX_COUNT_REG_OFF 0x2C
116#define MASTER_TX_ADDR_REG_OFF 0x30
117#define MASTER_TX_COUNT_REG_OFF 0x34
118#define TX_DESCRIPTOR_REG_OFF 0x38
119#define TX_CHANNEL_CONFIG_COMMAND_OFF 0x40
120#define TX_CHANNEL_CONFIG_DATA_OFF 0x44
121#define TX_FREE_BUFFER_COUNT_OFF 0x48
122#define RX_FREE_BUFFER_COUNT_OFF 0x4C
123#define TX_CONFIG_OFF 0x50
124#define TX_STATUS_OFF 0x54
125#define RX_CONFIG_OFF 0x58
126#define RX_LINE_CONFIG_OFF 0x5C
127#define RX_QUEUE_RD_PTR_OFF 0x60
128#define RX_QUEUE_WR_PTR_OFF 0x64
129#define MAX_AAL5_CELL_COUNT_OFF 0x68
130#define RX_CHANNEL_PORT_OFF 0x6C
131#define TX_CELL_COUNT_OFF 0x70
132#define RX_CELL_COUNT_OFF 0x74
133#define HEC_ERROR_COUNT_OFF 0x78
134#define UNASSIGNED_CELL_COUNT_OFF 0x7C
135
136/* Register bit definitions */
137
138/* Control 0 register */
139
140#define SEEPROM_DO 0x00000001
141#define SEEPROM_DI 0x00000002
142#define SEEPROM_SK 0x00000004
143#define SEEPROM_CS 0x00000008
144#define DEBUG_BIT_0 0x00000010
145#define DEBUG_BIT_1 0x00000020
146#define DEBUG_BIT_2 0x00000040
147// RESERVED 0x00000080
148#define DEBUG_BIT_0_OE 0x00000100
149#define DEBUG_BIT_1_OE 0x00000200
150#define DEBUG_BIT_2_OE 0x00000400
151// RESERVED 0x00000800
152#define DEBUG_BIT_0_STATE 0x00001000
153#define DEBUG_BIT_1_STATE 0x00002000
154#define DEBUG_BIT_2_STATE 0x00004000
155// RESERVED 0x00008000
156#define GENERAL_BIT_0 0x00010000
157#define GENERAL_BIT_1 0x00020000
158#define GENERAL_BIT_2 0x00040000
159#define GENERAL_BIT_3 0x00080000
160#define RESET_HORIZON 0x00100000
161#define RESET_ATM 0x00200000
162#define RESET_RX 0x00400000
163#define RESET_TX 0x00800000
164#define RESET_HOST 0x01000000
165// RESERVED 0x02000000
166#define TARGET_RETRY_DISABLE 0x04000000
167#define ATM_LAYER_SELECT 0x08000000
168#define ATM_LAYER_STATUS 0x10000000
169// RESERVED 0xE0000000
170
171/* Interrupt source and enable registers */
172
173#define RX_DATA_AV 0x00000001
174#define RX_DISABLED 0x00000002
175#define TIMING_MARKER 0x00000004
176#define FORCED 0x00000008
177#define RX_BUS_MASTER_COMPLETE 0x00000010
178#define TX_BUS_MASTER_COMPLETE 0x00000020
179#define ABR_TX_CELL_COUNT_INT 0x00000040
180#define DEBUG_INT 0x00000080
181// RESERVED 0xFFFFFF00
182
183/* PIO and Bus Mastering */
184
185#define MAX_PIO_COUNT 0x000000ff // 255 - make tunable?
186// 8188 is a hard limit for bus mastering
187#define MAX_TRANSFER_COUNT 0x00001ffc // 8188
188#define MASTER_TX_AUTO_APPEND_DESC 0x80000000
189
190/* TX channel config command port */
191
192#define PCR_TIMER_ACCESS 0x0000
193#define SCR_TIMER_ACCESS 0x0001
194#define BUCKET_CAPACITY_ACCESS 0x0002
195#define BUCKET_FULLNESS_ACCESS 0x0003
196#define RATE_TYPE_ACCESS 0x0004
197// UNUSED 0x00F8
198#define TX_CHANNEL_CONFIG_MULT 0x0100
199// UNUSED 0xF800
200#define BUCKET_MAX_SIZE 0x003f
201
202/* TX channel config data port */
203
204#define CLOCK_SELECT_SHIFT 4
205#define CLOCK_DISABLE 0x00ff
206
207#define IDLE_RATE_TYPE 0x0
208#define ABR_RATE_TYPE 0x1
209#define VBR_RATE_TYPE 0x2
210#define CBR_RATE_TYPE 0x3
211
212/* TX config register */
213
214#define DRVR_DRVRBAR_ENABLE 0x0001
215#define TXCLK_MUX_SELECT_RCLK 0x0002
216#define TRANSMIT_TIMING_MARKER 0x0004
217#define LOOPBACK_TIMING_MARKER 0x0008
218#define TX_TEST_MODE_16MHz 0x0000
219#define TX_TEST_MODE_8MHz 0x0010
220#define TX_TEST_MODE_5_33MHz 0x0020
221#define TX_TEST_MODE_4MHz 0x0030
222#define TX_TEST_MODE_3_2MHz 0x0040
223#define TX_TEST_MODE_2_66MHz 0x0050
224#define TX_TEST_MODE_2_29MHz 0x0060
225#define TX_NORMAL_OPERATION 0x0070
226#define ABR_ROUND_ROBIN 0x0080
227
228/* TX status register */
229
230#define IDLE_CHANNELS_MASK 0x00FF
231#define ABR_CELL_COUNT_REACHED_MULT 0x0100
232#define ABR_CELL_COUNT_REACHED_MASK 0xFF
233
234/* RX config register */
235
236#define NON_USER_CELLS_IN_ONE_CHANNEL 0x0008
237#define RX_ENABLE 0x0010
238#define IGNORE_UNUSED_VPI_VCI_BITS_SET 0x0000
239#define NON_USER_UNUSED_VPI_VCI_BITS_SET 0x0020
240#define DISCARD_UNUSED_VPI_VCI_BITS_SET 0x0040
241
242/* RX line config register */
243
244#define SIGNAL_LOSS 0x0001
245#define FREQUENCY_DETECT_ERROR 0x0002
246#define LOCK_DETECT_ERROR 0x0004
247#define SELECT_INTERNAL_LOOPBACK 0x0008
248#define LOCK_DETECT_ENABLE 0x0010
249#define FREQUENCY_DETECT_ENABLE 0x0020
250#define USER_FRAQ 0x0040
251#define GXTALOUT_SELECT_DIV4 0x0080
252#define GXTALOUT_SELECT_NO_GATING 0x0100
253#define TIMING_MARKER_RECEIVED 0x0200
254
255/* RX channel port */
256
257#define RX_CHANNEL_MASK 0x03FF
258// UNUSED 0x3C00
259#define FLUSH_CHANNEL 0x4000
260#define RX_CHANNEL_UPDATE_IN_PROGRESS 0x8000
261
262/* Receive queue entry */
263
264#define RX_Q_ENTRY_LENGTH_MASK 0x0000FFFF
265#define RX_Q_ENTRY_CHANNEL_SHIFT 16
266#define SIMONS_DODGEY_MARKER 0x08000000
267#define RX_CONGESTION_EXPERIENCED 0x10000000
268#define RX_CRC_10_OK 0x20000000
269#define RX_CRC_32_OK 0x40000000
270#define RX_COMPLETE_FRAME 0x80000000
271
272/* Offsets and constants for use with the buffer memory */
273
274/* Buffer pointers and channel types */
275
276#define BUFFER_PTR_MASK 0x0000FFFF
277#define RX_INT_THRESHOLD_MULT 0x00010000
278#define RX_INT_THRESHOLD_MASK 0x07FF
279#define INT_EVERY_N_CELLS 0x08000000
280#define CONGESTION_EXPERIENCED 0x10000000
281#define FIRST_CELL_OF_AAL5_FRAME 0x20000000
282#define CHANNEL_TYPE_AAL5 0x00000000
283#define CHANNEL_TYPE_RAW_CELLS 0x40000000
284#define CHANNEL_TYPE_AAL3_4 0x80000000
285
286/* Buffer status stuff */
287
288#define BUFF_STATUS_MASK 0x00030000
289#define BUFF_STATUS_EMPTY 0x00000000
290#define BUFF_STATUS_CELL_AV 0x00010000
291#define BUFF_STATUS_LAST_CELL_AV 0x00020000
292
293/* Transmit channel stuff */
294
295/* Receive channel stuff */
296
297#define RX_CHANNEL_DISABLED 0x00000000
298#define RX_CHANNEL_IDLE 0x00000001
299
300/* General things */
301
302#define INITIAL_CRC 0xFFFFFFFF
303
304// A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit)
305// word addresses and so standard C pointer operations break (as they
306// assume byte addresses); so we pretend that Horizon words (and word
307// pointers) are bytes (and byte pointers) for the purposes of having
308// a memory map that works.
309
310typedef u8 HDW;
311
312typedef struct cell_buf {
313 HDW payload[12];
314 HDW next;
315 HDW cell_count; // AAL5 rx bufs
316 HDW res;
317 union {
318 HDW partial_crc; // AAL5 rx bufs
319 HDW cell_header; // RAW bufs
320 } u;
321} cell_buf;
322
323typedef struct tx_ch_desc {
324 HDW rd_buf_type;
325 HDW wr_buf_type;
326 HDW partial_crc;
327 HDW cell_header;
328} tx_ch_desc;
329
330typedef struct rx_ch_desc {
331 HDW wr_buf_type;
332 HDW rd_buf_type;
333} rx_ch_desc;
334
335typedef struct rx_q_entry {
336 HDW entry;
337} rx_q_entry;
338
339#define TX_CHANS 8
340#define RX_CHANS 1024
341#define RX_QS 1024
342#define MAX_VCS RX_CHANS
343
344/* Horizon buffer memory map */
345
346// TX Channel Descriptors 2
347// TX Initial Buffers 8 // TX_CHANS
348#define BUFN1_SIZE 118 // (126 - TX_CHANS)
349// RX/TX Start/End Buffers 4
350#define BUFN2_SIZE 124
351// RX Queue Entries 64
352#define BUFN3_SIZE 192
353// RX Channel Descriptors 128
354#define BUFN4_SIZE 1408
355// TOTAL cell_buff chunks 2048
356
357// cell_buf bufs[2048];
358// HDW dws[32768];
359
360typedef struct MEMMAP {
361 tx_ch_desc tx_descs[TX_CHANS]; // 8 * 4 = 32 , 0x0020
362 cell_buf inittxbufs[TX_CHANS]; // these are really
363 cell_buf bufn1[BUFN1_SIZE]; // part of this pool
364 cell_buf txfreebufstart;
365 cell_buf txfreebufend;
366 cell_buf rxfreebufstart;
367 cell_buf rxfreebufend; // 8+118+1+1+1+1+124 = 254
368 cell_buf bufn2[BUFN2_SIZE]; // 16 * 254 = 4064 , 0x1000
369 rx_q_entry rx_q_entries[RX_QS]; // 1 * 1024 = 1024 , 0x1400
370 cell_buf bufn3[BUFN3_SIZE]; // 16 * 192 = 3072 , 0x2000
371 rx_ch_desc rx_descs[MAX_VCS]; // 2 * 1024 = 2048 , 0x2800
372 cell_buf bufn4[BUFN4_SIZE]; // 16 * 1408 = 22528 , 0x8000
373} MEMMAP;
374
375#define memmap ((MEMMAP *)0)
376
377/* end horizon specific bits */
378
379typedef enum {
380 aal0,
381 aal34,
382 aal5
383} hrz_aal;
384
385typedef enum {
386 tx_busy,
387 rx_busy,
388 ultra
389} hrz_flags;
390
391// a single struct pointed to by atm_vcc->dev_data
392
393typedef struct {
394 unsigned int tx_rate;
395 unsigned int rx_rate;
396 u16 channel;
397 u16 tx_xbr_bits;
398 u16 tx_pcr_bits;
399#if 0
400 u16 tx_scr_bits;
401 u16 tx_bucket_bits;
402#endif
403 hrz_aal aal;
404} hrz_vcc;
405
406struct hrz_dev {
407
408 u32 iobase;
409 u32 * membase;
410
411 struct sk_buff * rx_skb; // skb being RXed
412 unsigned int rx_bytes; // bytes remaining to RX within region
413 void * rx_addr; // addr to send bytes to (for PIO)
414 unsigned int rx_channel; // channel that the skb is going out on
415
416 struct sk_buff * tx_skb; // skb being TXed
417 unsigned int tx_bytes; // bytes remaining to TX within region
418 void * tx_addr; // addr to send bytes from (for PIO)
419 struct iovec * tx_iovec; // remaining regions
420 unsigned int tx_regions; // number of remaining regions
421
422 spinlock_t mem_lock;
423 wait_queue_head_t tx_queue;
424
425 u8 irq;
426 long flags;
427 u8 tx_last;
428 u8 tx_idle;
429
430 rx_q_entry * rx_q_reset;
431 rx_q_entry * rx_q_entry;
432 rx_q_entry * rx_q_wrap;
433
434 struct atm_dev * atm_dev;
435
436 u32 last_vc;
437
438 int noof_spare_buffers;
439 u16 spare_buffers[SPARE_BUFFER_POOL_SIZE];
440
441 u16 tx_channel_record[TX_CHANS];
442
443 // this is what we follow when we get incoming data
444 u32 txer[MAX_VCS/32];
445 struct atm_vcc * rxer[MAX_VCS];
446
447 // cell rate allocation
448 spinlock_t rate_lock;
449 unsigned int rx_avail;
450 unsigned int tx_avail;
451
452 // dev stats
453 unsigned long tx_cell_count;
454 unsigned long rx_cell_count;
455 unsigned long hec_error_count;
456 unsigned long unassigned_cell_count;
457
458 struct pci_dev * pci_dev;
459 struct timer_list housekeeping;
460};
461
462typedef struct hrz_dev hrz_dev;
463
464/* macros for use later */
465
466#define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0)
467
468#define INTERESTING_INTERRUPTS \
469 (RX_DATA_AV | RX_DISABLED | TX_BUS_MASTER_COMPLETE | RX_BUS_MASTER_COMPLETE)
470
471// 190 cells by default (192 TX buffers - 2 elbow room, see docs)
472#define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112
473
474// Have enough RX buffers (unless we allow other buffer splits)
475#define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU
476
477/* multi-statement macro protector */
478#define DW(x) do{ x } while(0)
479
480#define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data)
481#define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data)
482
483/* Turn the LEDs on and off */
484// The LEDs bits are upside down in that setting the bit in the debug
485// register will turn the appropriate LED off.
486
487#define YELLOW_LED DEBUG_BIT_0
488#define GREEN_LED DEBUG_BIT_1
489#define YELLOW_LED_OE DEBUG_BIT_0_OE
490#define GREEN_LED_OE DEBUG_BIT_1_OE
491
492#define GREEN_LED_OFF(dev) \
493 wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | GREEN_LED)
494#define GREEN_LED_ON(dev) \
495 wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED)
496#define YELLOW_LED_OFF(dev) \
497 wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | YELLOW_LED)
498#define YELLOW_LED_ON(dev) \
499 wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED)
500
501typedef enum {
502 round_up,
503 round_down,
504 round_nearest
505} rounding;
506
507#endif /* DRIVER_ATM_HORIZON_H */