blob: dcd98793d5681e14e7521e1f9efcf92806fe4f8b [file] [log] [blame]
Ben Dooks5fc404e2007-02-20 13:58:21 -08001/* linux/drivers/video/sm501fb.c
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * Vincent Sanders <vince@simtec.co.uk>
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Framebuffer driver for the Silicon Motion SM501
12 */
13
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/errno.h>
17#include <linux/string.h>
18#include <linux/mm.h>
19#include <linux/tty.h>
20#include <linux/slab.h>
21#include <linux/delay.h>
22#include <linux/fb.h>
23#include <linux/init.h>
24#include <linux/vmalloc.h>
25#include <linux/dma-mapping.h>
26#include <linux/interrupt.h>
27#include <linux/workqueue.h>
28#include <linux/wait.h>
29#include <linux/platform_device.h>
30#include <linux/clk.h>
Ben Dooksf22e5212007-10-16 01:28:38 -070031#include <linux/console.h>
Ben Dooks5fc404e2007-02-20 13:58:21 -080032
33#include <asm/io.h>
34#include <asm/uaccess.h>
35#include <asm/div64.h>
36
37#ifdef CONFIG_PM
38#include <linux/pm.h>
39#endif
40
41#include <linux/sm501.h>
42#include <linux/sm501-regs.h>
43
44#define NR_PALETTE 256
45
46enum sm501_controller {
47 HEAD_CRT = 0,
48 HEAD_PANEL = 1,
49};
50
Ben Dooksd0525412008-07-23 21:31:37 -070051/* SM501 memory address.
52 *
53 * This structure is used to track memory usage within the SM501 framebuffer
54 * allocation. The sm_addr field is stored as an offset as it is often used
55 * against both the physical and mapped addresses.
56 */
Ben Dooks5fc404e2007-02-20 13:58:21 -080057struct sm501_mem {
58 unsigned long size;
Ben Dooksd0525412008-07-23 21:31:37 -070059 unsigned long sm_addr; /* offset from base of sm501 fb. */
Ben Dooks5fc404e2007-02-20 13:58:21 -080060 void __iomem *k_addr;
61};
62
63/* private data that is shared between all frambuffers* */
64struct sm501fb_info {
65 struct device *dev;
66 struct fb_info *fb[2]; /* fb info for both heads */
67 struct resource *fbmem_res; /* framebuffer resource */
68 struct resource *regs_res; /* registers resource */
69 struct sm501_platdata_fb *pdata; /* our platform data */
70
Ben Dooksc1f303b2007-10-16 01:28:37 -070071 unsigned long pm_crt_ctrl; /* pm: crt ctrl save */
72
Ben Dooks5fc404e2007-02-20 13:58:21 -080073 int irq;
74 int swap_endian; /* set to swap rgb=>bgr */
75 void __iomem *regs; /* remapped registers */
76 void __iomem *fbmem; /* remapped framebuffer */
77 size_t fbmem_len; /* length of remapped region */
78};
79
80/* per-framebuffer private data */
81struct sm501fb_par {
82 u32 pseudo_palette[16];
83
84 enum sm501_controller head;
85 struct sm501_mem cursor;
86 struct sm501_mem screen;
87 struct fb_ops ops;
88
89 void *store_fb;
90 void *store_cursor;
91 void __iomem *cursor_regs;
92 struct sm501fb_info *info;
93};
94
95/* Helper functions */
96
97static inline int h_total(struct fb_var_screeninfo *var)
98{
99 return var->xres + var->left_margin +
100 var->right_margin + var->hsync_len;
101}
102
103static inline int v_total(struct fb_var_screeninfo *var)
104{
105 return var->yres + var->upper_margin +
106 var->lower_margin + var->vsync_len;
107}
108
109/* sm501fb_sync_regs()
110 *
111 * This call is mainly for PCI bus systems where we need to
112 * ensure that any writes to the bus are completed before the
113 * next phase, or after completing a function.
114*/
115
116static inline void sm501fb_sync_regs(struct sm501fb_info *info)
117{
118 readl(info->regs);
119}
120
121/* sm501_alloc_mem
122 *
123 * This is an attempt to lay out memory for the two framebuffers and
124 * everything else
125 *
126 * |fbmem_res->start fbmem_res->end|
127 * | |
128 * |fb[0].fix.smem_start | |fb[1].fix.smem_start | 2K |
129 * |-> fb[0].fix.smem_len <-| spare |-> fb[1].fix.smem_len <-|-> cursors <-|
130 *
131 * The "spare" space is for the 2d engine data
132 * the fixed is space for the cursors (2x1Kbyte)
133 *
134 * we need to allocate memory for the 2D acceleration engine
135 * command list and the data for the engine to deal with.
136 *
137 * - all allocations must be 128bit aligned
138 * - cursors are 64x64x2 bits (1Kbyte)
139 *
140 */
141
142#define SM501_MEMF_CURSOR (1)
143#define SM501_MEMF_PANEL (2)
144#define SM501_MEMF_CRT (4)
145#define SM501_MEMF_ACCEL (8)
146
Adrian Bunk9540f752007-02-28 20:11:06 -0800147static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
148 unsigned int why, size_t size)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800149{
Ben Dooksd0525412008-07-23 21:31:37 -0700150 struct sm501fb_par *par;
Ben Dooks9b599fb2008-07-23 21:31:36 -0700151 struct fb_info *fbi;
Ben Dooksd0525412008-07-23 21:31:37 -0700152 unsigned int ptr;
153 unsigned int end;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800154
155 switch (why) {
156 case SM501_MEMF_CURSOR:
157 ptr = inf->fbmem_len - size;
Ben Dooksd0525412008-07-23 21:31:37 -0700158 inf->fbmem_len = ptr; /* adjust available memory. */
Ben Dooks5fc404e2007-02-20 13:58:21 -0800159 break;
160
161 case SM501_MEMF_PANEL:
roel kluinc00b1b72009-01-06 14:42:36 -0800162 if (size > inf->fbmem_len)
163 return -ENOMEM;
164
Ben Dooks5fc404e2007-02-20 13:58:21 -0800165 ptr = inf->fbmem_len - size;
Ben Dooksd0525412008-07-23 21:31:37 -0700166 fbi = inf->fb[HEAD_CRT];
167
168 /* round down, some programs such as directfb do not draw
169 * 0,0 correctly unless the start is aligned to a page start.
170 */
171
172 if (ptr > 0)
173 ptr &= ~(PAGE_SIZE - 1);
Ben Dooks9b599fb2008-07-23 21:31:36 -0700174
175 if (fbi && ptr < fbi->fix.smem_len)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800176 return -ENOMEM;
177
178 break;
179
180 case SM501_MEMF_CRT:
181 ptr = 0;
Ben Dooksd0525412008-07-23 21:31:37 -0700182
183 /* check to see if we have panel memory allocated
184 * which would put an limit on available memory. */
185
186 fbi = inf->fb[HEAD_PANEL];
187 if (fbi) {
188 par = fbi->par;
189 end = par->screen.k_addr ? par->screen.sm_addr : inf->fbmem_len;
190 } else
191 end = inf->fbmem_len;
192
193 if ((ptr + size) > end)
194 return -ENOMEM;
195
Ben Dooks5fc404e2007-02-20 13:58:21 -0800196 break;
197
198 case SM501_MEMF_ACCEL:
Ben Dooksd0525412008-07-23 21:31:37 -0700199 fbi = inf->fb[HEAD_CRT];
Ben Dooks9b599fb2008-07-23 21:31:36 -0700200 ptr = fbi ? fbi->fix.smem_len : 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800201
Ben Dooksd0525412008-07-23 21:31:37 -0700202 fbi = inf->fb[HEAD_PANEL];
203 if (fbi) {
204 par = fbi->par;
205 end = par->screen.sm_addr;
206 } else
Ben Dooks9b599fb2008-07-23 21:31:36 -0700207 end = inf->fbmem_len;
208
209 if ((ptr + size) > end)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800210 return -ENOMEM;
Ben Dooks9b599fb2008-07-23 21:31:36 -0700211
Ben Dooks5fc404e2007-02-20 13:58:21 -0800212 break;
213
214 default:
215 return -EINVAL;
216 }
217
218 mem->size = size;
219 mem->sm_addr = ptr;
220 mem->k_addr = inf->fbmem + ptr;
221
222 dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n",
223 __func__, mem->sm_addr, mem->k_addr, why, size);
224
225 return 0;
226}
227
228/* sm501fb_ps_to_hz
229 *
230 * Converts a period in picoseconds to Hz.
231 *
232 * Note, we try to keep this in Hz to minimise rounding with
233 * the limited PLL settings on the SM501.
234*/
235
236static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
237{
238 unsigned long long numerator=1000000000000ULL;
239
240 /* 10^12 / picosecond period gives frequency in Hz */
241 do_div(numerator, psvalue);
242 return (unsigned long)numerator;
243}
244
245/* sm501fb_hz_to_ps is identical to the oposite transform */
246
247#define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
248
249/* sm501fb_setup_gamma
250 *
251 * Programs a linear 1.0 gamma ramp in case the gamma
252 * correction is enabled without programming anything else.
253*/
254
255static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
256 unsigned long palette)
257{
258 unsigned long value = 0;
259 int offset;
260
261 /* set gamma values */
262 for (offset = 0; offset < 256 * 4; offset += 4) {
263 writel(value, fbi->regs + palette + offset);
264 value += 0x010101; /* Advance RGB by 1,1,1.*/
265 }
266}
267
268/* sm501fb_check_var
269 *
270 * check common variables for both panel and crt
271*/
272
273static int sm501fb_check_var(struct fb_var_screeninfo *var,
274 struct fb_info *info)
275{
276 struct sm501fb_par *par = info->par;
277 struct sm501fb_info *sm = par->info;
278 unsigned long tmp;
279
280 /* check we can fit these values into the registers */
281
Ville Syrjala7e533702008-03-04 14:28:49 -0800282 if (var->hsync_len > 255 || var->vsync_len > 63)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800283 return -EINVAL;
284
Ville Syrjala7e533702008-03-04 14:28:49 -0800285 /* hdisplay end and hsync start */
286 if ((var->xres + var->right_margin) > 4096)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800287 return -EINVAL;
288
Ville Syrjala7e533702008-03-04 14:28:49 -0800289 /* vdisplay end and vsync start */
Ben Dooks5fc404e2007-02-20 13:58:21 -0800290 if ((var->yres + var->lower_margin) > 2048)
291 return -EINVAL;
292
293 /* hard limits of device */
294
295 if (h_total(var) > 4096 || v_total(var) > 2048)
296 return -EINVAL;
297
298 /* check our line length is going to be 128 bit aligned */
299
300 tmp = (var->xres * var->bits_per_pixel) / 8;
301 if ((tmp & 15) != 0)
302 return -EINVAL;
303
304 /* check the virtual size */
305
306 if (var->xres_virtual > 4096 || var->yres_virtual > 2048)
307 return -EINVAL;
308
309 /* can cope with 8,16 or 32bpp */
310
311 if (var->bits_per_pixel <= 8)
312 var->bits_per_pixel = 8;
313 else if (var->bits_per_pixel <= 16)
314 var->bits_per_pixel = 16;
315 else if (var->bits_per_pixel == 24)
316 var->bits_per_pixel = 32;
317
318 /* set r/g/b positions and validate bpp */
319 switch(var->bits_per_pixel) {
320 case 8:
321 var->red.length = var->bits_per_pixel;
322 var->red.offset = 0;
323 var->green.length = var->bits_per_pixel;
324 var->green.offset = 0;
325 var->blue.length = var->bits_per_pixel;
326 var->blue.offset = 0;
327 var->transp.length = 0;
Ville Syrjala19d06ef2008-03-04 14:28:48 -0800328 var->transp.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800329
330 break;
331
332 case 16:
333 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
Ben Dooks5fc404e2007-02-20 13:58:21 -0800334 var->blue.offset = 11;
335 var->green.offset = 5;
336 var->red.offset = 0;
Ville Syrjalafedbb362008-03-04 14:28:47 -0800337 } else {
338 var->red.offset = 11;
339 var->green.offset = 5;
340 var->blue.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800341 }
Ville Syrjala19d06ef2008-03-04 14:28:48 -0800342 var->transp.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800343
344 var->red.length = 5;
345 var->green.length = 6;
346 var->blue.length = 5;
347 var->transp.length = 0;
348 break;
349
350 case 32:
351 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
352 var->transp.offset = 0;
353 var->red.offset = 8;
354 var->green.offset = 16;
355 var->blue.offset = 24;
356 } else {
357 var->transp.offset = 24;
358 var->red.offset = 16;
359 var->green.offset = 8;
360 var->blue.offset = 0;
361 }
362
363 var->red.length = 8;
364 var->green.length = 8;
365 var->blue.length = 8;
366 var->transp.length = 0;
367 break;
368
369 default:
370 return -EINVAL;
371 }
372
373 return 0;
374}
375
376/*
377 * sm501fb_check_var_crt():
378 *
379 * check the parameters for the CRT head, and either bring them
380 * back into range, or return -EINVAL.
381*/
382
383static int sm501fb_check_var_crt(struct fb_var_screeninfo *var,
384 struct fb_info *info)
385{
386 return sm501fb_check_var(var, info);
387}
388
389/* sm501fb_check_var_pnl():
390 *
391 * check the parameters for the CRT head, and either bring them
392 * back into range, or return -EINVAL.
393*/
394
395static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var,
396 struct fb_info *info)
397{
398 return sm501fb_check_var(var, info);
399}
400
401/* sm501fb_set_par_common
402 *
403 * set common registers for framebuffers
404*/
405
406static int sm501fb_set_par_common(struct fb_info *info,
407 struct fb_var_screeninfo *var)
408{
409 struct sm501fb_par *par = info->par;
410 struct sm501fb_info *fbi = par->info;
411 unsigned long pixclock; /* pixelclock in Hz */
412 unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
413 unsigned int mem_type;
414 unsigned int clock_type;
415 unsigned int head_addr;
416
417 dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
418 __func__, var->xres, var->yres, var->bits_per_pixel,
419 var->xres_virtual, var->yres_virtual);
420
421 switch (par->head) {
422 case HEAD_CRT:
423 mem_type = SM501_MEMF_CRT;
424 clock_type = SM501_CLOCK_V2XCLK;
425 head_addr = SM501_DC_CRT_FB_ADDR;
426 break;
427
428 case HEAD_PANEL:
429 mem_type = SM501_MEMF_PANEL;
430 clock_type = SM501_CLOCK_P2XCLK;
431 head_addr = SM501_DC_PANEL_FB_ADDR;
432 break;
433
434 default:
435 mem_type = 0; /* stop compiler warnings */
436 head_addr = 0;
437 clock_type = 0;
438 }
439
440 switch (var->bits_per_pixel) {
441 case 8:
442 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
443 break;
444
445 case 16:
Ville Syrjala5619d822008-03-04 14:28:46 -0800446 info->fix.visual = FB_VISUAL_TRUECOLOR;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800447 break;
448
449 case 32:
450 info->fix.visual = FB_VISUAL_TRUECOLOR;
451 break;
452 }
453
454 /* allocate fb memory within 501 */
455 info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
456 info->fix.smem_len = info->fix.line_length * var->yres_virtual;
457
458 dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
459 info->fix.line_length);
460
461 if (sm501_alloc_mem(fbi, &par->screen, mem_type,
462 info->fix.smem_len)) {
463 dev_err(fbi->dev, "no memory available\n");
464 return -ENOMEM;
465 }
466
467 info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
468
469 info->screen_base = fbi->fbmem + par->screen.sm_addr;
470 info->screen_size = info->fix.smem_len;
471
472 /* set start of framebuffer to the screen */
473
474 writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr);
475
476 /* program CRT clock */
477
478 pixclock = sm501fb_ps_to_hz(var->pixclock);
479
480 sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type,
481 pixclock);
482
483 /* update fb layer with actual clock used */
484 var->pixclock = sm501fb_hz_to_ps(sm501pixclock);
485
486 dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz) = %lu, "
487 "sm501pixclock = %lu, error = %ld%%\n",
488 __func__, var->pixclock, pixclock, sm501pixclock,
489 ((pixclock - sm501pixclock)*100)/pixclock);
490
491 return 0;
492}
493
494/* sm501fb_set_par_geometry
495 *
496 * set the geometry registers for specified framebuffer.
497*/
498
499static void sm501fb_set_par_geometry(struct fb_info *info,
500 struct fb_var_screeninfo *var)
501{
502 struct sm501fb_par *par = info->par;
503 struct sm501fb_info *fbi = par->info;
504 void __iomem *base = fbi->regs;
505 unsigned long reg;
506
507 if (par->head == HEAD_CRT)
508 base += SM501_DC_CRT_H_TOT;
509 else
510 base += SM501_DC_PANEL_H_TOT;
511
512 /* set framebuffer width and display width */
513
514 reg = info->fix.line_length;
515 reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
516
517 writel(reg, fbi->regs + (par->head == HEAD_CRT ?
518 SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET));
519
520 /* program horizontal total */
521
522 reg = (h_total(var) - 1) << 16;
523 reg |= (var->xres - 1);
524
525 writel(reg, base + SM501_OFF_DC_H_TOT);
526
527 /* program horizontal sync */
528
529 reg = var->hsync_len << 16;
530 reg |= var->xres + var->right_margin - 1;
531
532 writel(reg, base + SM501_OFF_DC_H_SYNC);
533
534 /* program vertical total */
535
536 reg = (v_total(var) - 1) << 16;
537 reg |= (var->yres - 1);
538
539 writel(reg, base + SM501_OFF_DC_V_TOT);
540
541 /* program vertical sync */
542 reg = var->vsync_len << 16;
543 reg |= var->yres + var->lower_margin - 1;
544
545 writel(reg, base + SM501_OFF_DC_V_SYNC);
546}
547
548/* sm501fb_pan_crt
549 *
550 * pan the CRT display output within an virtual framebuffer
551*/
552
553static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
554 struct fb_info *info)
555{
556 struct sm501fb_par *par = info->par;
557 struct sm501fb_info *fbi = par->info;
558 unsigned int bytes_pixel = var->bits_per_pixel / 8;
559 unsigned long reg;
560 unsigned long xoffs;
561
562 xoffs = var->xoffset * bytes_pixel;
563
564 reg = readl(fbi->regs + SM501_DC_CRT_CONTROL);
565
566 reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
567 reg |= ((xoffs & 15) / bytes_pixel) << 4;
568 writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
569
570 reg = (par->screen.sm_addr + xoffs +
571 var->yoffset * info->fix.line_length);
572 writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
573
574 sm501fb_sync_regs(fbi);
575 return 0;
576}
577
578/* sm501fb_pan_pnl
579 *
580 * pan the panel display output within an virtual framebuffer
581*/
582
583static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
584 struct fb_info *info)
585{
586 struct sm501fb_par *par = info->par;
587 struct sm501fb_info *fbi = par->info;
588 unsigned long reg;
589
590 reg = var->xoffset | (var->xres_virtual << 16);
591 writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
592
593 reg = var->yoffset | (var->yres_virtual << 16);
594 writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
595
596 sm501fb_sync_regs(fbi);
597 return 0;
598}
599
600/* sm501fb_set_par_crt
601 *
602 * Set the CRT video mode from the fb_info structure
603*/
604
605static int sm501fb_set_par_crt(struct fb_info *info)
606{
607 struct sm501fb_par *par = info->par;
608 struct sm501fb_info *fbi = par->info;
609 struct fb_var_screeninfo *var = &info->var;
610 unsigned long control; /* control register */
611 int ret;
612
613 /* activate new configuration */
614
615 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
616
617 /* enable CRT DAC - note 0 is on!*/
618 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
619
620 control = readl(fbi->regs + SM501_DC_CRT_CONTROL);
621
622 control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
623 SM501_DC_CRT_CONTROL_GAMMA |
624 SM501_DC_CRT_CONTROL_BLANK |
625 SM501_DC_CRT_CONTROL_SEL |
626 SM501_DC_CRT_CONTROL_CP |
627 SM501_DC_CRT_CONTROL_TVP);
628
629 /* set the sync polarities before we check data source */
630
631 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
632 control |= SM501_DC_CRT_CONTROL_HSP;
633
634 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
635 control |= SM501_DC_CRT_CONTROL_VSP;
636
637 if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
638 /* the head is displaying panel data... */
639
640 sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
641 goto out_update;
642 }
643
644 ret = sm501fb_set_par_common(info, var);
645 if (ret) {
646 dev_err(fbi->dev, "failed to set common parameters\n");
647 return ret;
648 }
649
650 sm501fb_pan_crt(var, info);
651 sm501fb_set_par_geometry(info, var);
652
653 control |= SM501_FIFO_3; /* fill if >3 free slots */
654
655 switch(var->bits_per_pixel) {
656 case 8:
657 control |= SM501_DC_CRT_CONTROL_8BPP;
658 break;
659
660 case 16:
661 control |= SM501_DC_CRT_CONTROL_16BPP;
Ville Syrjala5619d822008-03-04 14:28:46 -0800662 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
Ben Dooks5fc404e2007-02-20 13:58:21 -0800663 break;
664
665 case 32:
666 control |= SM501_DC_CRT_CONTROL_32BPP;
667 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
668 break;
669
670 default:
671 BUG();
672 }
673
674 control |= SM501_DC_CRT_CONTROL_SEL; /* CRT displays CRT data */
675 control |= SM501_DC_CRT_CONTROL_TE; /* enable CRT timing */
676 control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */
677
678 out_update:
679 dev_dbg(fbi->dev, "new control is %08lx\n", control);
680
681 writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
682 sm501fb_sync_regs(fbi);
683
684 return 0;
685}
686
687static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
688{
689 unsigned long control;
690 void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
Magnus Dammdfcffa42008-02-06 01:39:24 -0800691 struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800692
693 control = readl(ctrl_reg);
694
695 if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
696 /* enable panel power */
697
698 control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */
699 writel(control, ctrl_reg);
700 sm501fb_sync_regs(fbi);
701 mdelay(10);
702
703 control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */
704 writel(control, ctrl_reg);
705 sm501fb_sync_regs(fbi);
706 mdelay(10);
707
Ben Dooks206c5d62008-07-23 21:31:35 -0700708 /* VBIASEN */
709
Ben Dookscdc83ae2008-05-23 13:04:53 -0700710 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700711 if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
712 control &= ~SM501_DC_PANEL_CONTROL_BIAS;
713 else
714 control |= SM501_DC_PANEL_CONTROL_BIAS;
715
Magnus Dammdfcffa42008-02-06 01:39:24 -0800716 writel(control, ctrl_reg);
717 sm501fb_sync_regs(fbi);
718 mdelay(10);
719 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800720
Ben Dookscdc83ae2008-05-23 13:04:53 -0700721 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700722 if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
723 control &= ~SM501_DC_PANEL_CONTROL_FPEN;
724 else
725 control |= SM501_DC_PANEL_CONTROL_FPEN;
726
Magnus Dammdfcffa42008-02-06 01:39:24 -0800727 writel(control, ctrl_reg);
728 sm501fb_sync_regs(fbi);
729 mdelay(10);
730 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800731 } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
732 /* disable panel power */
Ben Dookscdc83ae2008-05-23 13:04:53 -0700733 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700734 if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
735 control |= SM501_DC_PANEL_CONTROL_FPEN;
736 else
737 control &= ~SM501_DC_PANEL_CONTROL_FPEN;
738
Magnus Dammdfcffa42008-02-06 01:39:24 -0800739 writel(control, ctrl_reg);
740 sm501fb_sync_regs(fbi);
741 mdelay(10);
742 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800743
Ben Dookscdc83ae2008-05-23 13:04:53 -0700744 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700745 if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
746 control |= SM501_DC_PANEL_CONTROL_BIAS;
747 else
748 control &= ~SM501_DC_PANEL_CONTROL_BIAS;
749
Magnus Dammdfcffa42008-02-06 01:39:24 -0800750 writel(control, ctrl_reg);
751 sm501fb_sync_regs(fbi);
752 mdelay(10);
753 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800754
755 control &= ~SM501_DC_PANEL_CONTROL_DATA;
756 writel(control, ctrl_reg);
757 sm501fb_sync_regs(fbi);
758 mdelay(10);
759
760 control &= ~SM501_DC_PANEL_CONTROL_VDD;
761 writel(control, ctrl_reg);
762 sm501fb_sync_regs(fbi);
763 mdelay(10);
764 }
765
766 sm501fb_sync_regs(fbi);
767}
768
769/* sm501fb_set_par_pnl
770 *
771 * Set the panel video mode from the fb_info structure
772*/
773
774static int sm501fb_set_par_pnl(struct fb_info *info)
775{
776 struct sm501fb_par *par = info->par;
777 struct sm501fb_info *fbi = par->info;
778 struct fb_var_screeninfo *var = &info->var;
779 unsigned long control;
780 unsigned long reg;
781 int ret;
782
783 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
784
785 /* activate this new configuration */
786
787 ret = sm501fb_set_par_common(info, var);
788 if (ret)
789 return ret;
790
791 sm501fb_pan_pnl(var, info);
792 sm501fb_set_par_geometry(info, var);
793
794 /* update control register */
795
796 control = readl(fbi->regs + SM501_DC_PANEL_CONTROL);
797 control &= (SM501_DC_PANEL_CONTROL_GAMMA |
798 SM501_DC_PANEL_CONTROL_VDD |
799 SM501_DC_PANEL_CONTROL_DATA |
800 SM501_DC_PANEL_CONTROL_BIAS |
801 SM501_DC_PANEL_CONTROL_FPEN |
802 SM501_DC_PANEL_CONTROL_CP |
803 SM501_DC_PANEL_CONTROL_CK |
804 SM501_DC_PANEL_CONTROL_HP |
805 SM501_DC_PANEL_CONTROL_VP |
806 SM501_DC_PANEL_CONTROL_HPD |
807 SM501_DC_PANEL_CONTROL_VPD);
808
809 control |= SM501_FIFO_3; /* fill if >3 free slots */
810
811 switch(var->bits_per_pixel) {
812 case 8:
813 control |= SM501_DC_PANEL_CONTROL_8BPP;
814 break;
815
816 case 16:
817 control |= SM501_DC_PANEL_CONTROL_16BPP;
Ville Syrjala5619d822008-03-04 14:28:46 -0800818 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
Ben Dooks5fc404e2007-02-20 13:58:21 -0800819 break;
820
821 case 32:
822 control |= SM501_DC_PANEL_CONTROL_32BPP;
823 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
824 break;
825
826 default:
827 BUG();
828 }
829
830 writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
831
832 /* panel plane top left and bottom right location */
833
834 writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
835
836 reg = var->xres - 1;
837 reg |= (var->yres - 1) << 16;
838
839 writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
840
841 /* program panel control register */
842
843 control |= SM501_DC_PANEL_CONTROL_TE; /* enable PANEL timing */
844 control |= SM501_DC_PANEL_CONTROL_EN; /* enable PANEL gfx plane */
845
846 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
847 control |= SM501_DC_PANEL_CONTROL_HSP;
848
849 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
850 control |= SM501_DC_PANEL_CONTROL_VSP;
851
852 writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
853 sm501fb_sync_regs(fbi);
854
Ben Dookseb78f9b2007-10-16 01:28:39 -0700855 /* ensure the panel interface is not tristated at this point */
856
857 sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL,
858 0, SM501_SYSCTRL_PANEL_TRISTATE);
859
Ben Dooks5fc404e2007-02-20 13:58:21 -0800860 /* power the panel up */
861 sm501fb_panel_power(fbi, 1);
862 return 0;
863}
864
865
866/* chan_to_field
867 *
868 * convert a colour value into a field position
869 *
870 * from pxafb.c
871*/
872
873static inline unsigned int chan_to_field(unsigned int chan,
874 struct fb_bitfield *bf)
875{
876 chan &= 0xffff;
877 chan >>= 16 - bf->length;
878 return chan << bf->offset;
879}
880
881/* sm501fb_setcolreg
882 *
883 * set the colour mapping for modes that support palettised data
884*/
885
886static int sm501fb_setcolreg(unsigned regno,
887 unsigned red, unsigned green, unsigned blue,
888 unsigned transp, struct fb_info *info)
889{
890 struct sm501fb_par *par = info->par;
891 struct sm501fb_info *fbi = par->info;
892 void __iomem *base = fbi->regs;
893 unsigned int val;
894
895 if (par->head == HEAD_CRT)
896 base += SM501_DC_CRT_PALETTE;
897 else
898 base += SM501_DC_PANEL_PALETTE;
899
900 switch (info->fix.visual) {
901 case FB_VISUAL_TRUECOLOR:
902 /* true-colour, use pseuo-palette */
903
904 if (regno < 16) {
905 u32 *pal = par->pseudo_palette;
906
907 val = chan_to_field(red, &info->var.red);
908 val |= chan_to_field(green, &info->var.green);
909 val |= chan_to_field(blue, &info->var.blue);
910
911 pal[regno] = val;
912 }
913 break;
914
915 case FB_VISUAL_PSEUDOCOLOR:
916 if (regno < 256) {
917 val = (red >> 8) << 16;
918 val |= (green >> 8) << 8;
919 val |= blue >> 8;
920
921 writel(val, base + (regno * 4));
922 }
923
924 break;
925
926 default:
927 return 1; /* unknown type */
928 }
929
930 return 0;
931}
932
933/* sm501fb_blank_pnl
934 *
935 * Blank or un-blank the panel interface
936*/
937
938static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info)
939{
940 struct sm501fb_par *par = info->par;
941 struct sm501fb_info *fbi = par->info;
942
943 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
944
945 switch (blank_mode) {
946 case FB_BLANK_POWERDOWN:
947 sm501fb_panel_power(fbi, 0);
948 break;
949
950 case FB_BLANK_UNBLANK:
951 sm501fb_panel_power(fbi, 1);
952 break;
953
954 case FB_BLANK_NORMAL:
955 case FB_BLANK_VSYNC_SUSPEND:
956 case FB_BLANK_HSYNC_SUSPEND:
957 default:
958 return 1;
959 }
960
961 return 0;
962}
963
964/* sm501fb_blank_crt
965 *
966 * Blank or un-blank the crt interface
967*/
968
969static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
970{
971 struct sm501fb_par *par = info->par;
972 struct sm501fb_info *fbi = par->info;
973 unsigned long ctrl;
974
975 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
976
977 ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL);
978
979 switch (blank_mode) {
980 case FB_BLANK_POWERDOWN:
981 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
982 sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0);
983
984 case FB_BLANK_NORMAL:
985 ctrl |= SM501_DC_CRT_CONTROL_BLANK;
986 break;
987
988 case FB_BLANK_UNBLANK:
989 ctrl &= ~SM501_DC_CRT_CONTROL_BLANK;
990 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
991 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
992 break;
993
994 case FB_BLANK_VSYNC_SUSPEND:
995 case FB_BLANK_HSYNC_SUSPEND:
996 default:
997 return 1;
998
999 }
1000
1001 writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
1002 sm501fb_sync_regs(fbi);
1003
1004 return 0;
1005}
1006
1007/* sm501fb_cursor
1008 *
1009 * set or change the hardware cursor parameters
1010*/
1011
Adrian Bunk9540f752007-02-28 20:11:06 -08001012static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001013{
1014 struct sm501fb_par *par = info->par;
1015 struct sm501fb_info *fbi = par->info;
1016 void __iomem *base = fbi->regs;
1017 unsigned long hwc_addr;
1018 unsigned long fg, bg;
1019
1020 dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor);
1021
1022 if (par->head == HEAD_CRT)
1023 base += SM501_DC_CRT_HWC_BASE;
1024 else
1025 base += SM501_DC_PANEL_HWC_BASE;
1026
1027 /* check not being asked to exceed capabilities */
1028
1029 if (cursor->image.width > 64)
1030 return -EINVAL;
1031
1032 if (cursor->image.height > 64)
1033 return -EINVAL;
1034
1035 if (cursor->image.depth > 1)
1036 return -EINVAL;
1037
1038 hwc_addr = readl(base + SM501_OFF_HWC_ADDR);
1039
1040 if (cursor->enable)
1041 writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
1042 else
1043 writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
1044
1045 /* set data */
1046 if (cursor->set & FB_CUR_SETPOS) {
1047 unsigned int x = cursor->image.dx;
1048 unsigned int y = cursor->image.dy;
1049
1050 if (x >= 2048 || y >= 2048 )
1051 return -EINVAL;
1052
1053 dev_dbg(fbi->dev, "set position %d,%d\n", x, y);
1054
1055 //y += cursor->image.height;
1056
1057 writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
1058 }
1059
1060 if (cursor->set & FB_CUR_SETCMAP) {
1061 unsigned int bg_col = cursor->image.bg_color;
1062 unsigned int fg_col = cursor->image.fg_color;
1063
1064 dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n",
1065 __func__, bg_col, fg_col);
1066
1067 bg = ((info->cmap.red[bg_col] & 0xF8) << 8) |
1068 ((info->cmap.green[bg_col] & 0xFC) << 3) |
1069 ((info->cmap.blue[bg_col] & 0xF8) >> 3);
1070
1071 fg = ((info->cmap.red[fg_col] & 0xF8) << 8) |
1072 ((info->cmap.green[fg_col] & 0xFC) << 3) |
1073 ((info->cmap.blue[fg_col] & 0xF8) >> 3);
1074
Andrew Mortonbe3478d2007-05-08 00:40:22 -07001075 dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001076
1077 writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
1078 writel(fg, base + SM501_OFF_HWC_COLOR_3);
1079 }
1080
1081 if (cursor->set & FB_CUR_SETSIZE ||
1082 cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
1083 /* SM501 cursor is a two bpp 64x64 bitmap this routine
1084 * clears it to transparent then combines the cursor
1085 * shape plane with the colour plane to set the
1086 * cursor */
1087 int x, y;
1088 const unsigned char *pcol = cursor->image.data;
1089 const unsigned char *pmsk = cursor->mask;
1090 void __iomem *dst = par->cursor.k_addr;
1091 unsigned char dcol = 0;
1092 unsigned char dmsk = 0;
1093 unsigned int op;
1094
1095 dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n",
1096 __func__, cursor->image.width, cursor->image.height);
1097
1098 for (op = 0; op < (64*64*2)/8; op+=4)
1099 writel(0x0, dst + op);
1100
1101 for (y = 0; y < cursor->image.height; y++) {
1102 for (x = 0; x < cursor->image.width; x++) {
1103 if ((x % 8) == 0) {
1104 dcol = *pcol++;
1105 dmsk = *pmsk++;
1106 } else {
1107 dcol >>= 1;
1108 dmsk >>= 1;
1109 }
1110
1111 if (dmsk & 1) {
1112 op = (dcol & 1) ? 1 : 3;
1113 op <<= ((x % 4) * 2);
1114
1115 op |= readb(dst + (x / 4));
1116 writeb(op, dst + (x / 4));
1117 }
1118 }
1119 dst += (64*2)/8;
1120 }
1121 }
1122
1123 sm501fb_sync_regs(fbi); /* ensure cursor data flushed */
1124 return 0;
1125}
1126
1127/* sm501fb_crtsrc_show
1128 *
1129 * device attribute code to show where the crt output is sourced from
1130*/
1131
1132static ssize_t sm501fb_crtsrc_show(struct device *dev,
1133 struct device_attribute *attr, char *buf)
1134{
1135 struct sm501fb_info *info = dev_get_drvdata(dev);
1136 unsigned long ctrl;
1137
1138 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1139 ctrl &= SM501_DC_CRT_CONTROL_SEL;
1140
1141 return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
1142}
1143
1144/* sm501fb_crtsrc_show
1145 *
1146 * device attribute code to set where the crt output is sourced from
1147*/
1148
1149static ssize_t sm501fb_crtsrc_store(struct device *dev,
1150 struct device_attribute *attr,
1151 const char *buf, size_t len)
1152{
1153 struct sm501fb_info *info = dev_get_drvdata(dev);
1154 enum sm501_controller head;
1155 unsigned long ctrl;
1156
1157 if (len < 1)
1158 return -EINVAL;
1159
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001160 if (strnicmp(buf, "crt", 3) == 0)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001161 head = HEAD_CRT;
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001162 else if (strnicmp(buf, "panel", 5) == 0)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001163 head = HEAD_PANEL;
1164 else
1165 return -EINVAL;
1166
1167 dev_info(dev, "setting crt source to head %d\n", head);
1168
1169 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1170
1171 if (head == HEAD_CRT) {
1172 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1173 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
1174 ctrl |= SM501_DC_CRT_CONTROL_TE;
1175 } else {
1176 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1177 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
1178 ctrl &= ~SM501_DC_CRT_CONTROL_TE;
1179 }
1180
1181 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1182 sm501fb_sync_regs(info);
1183
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001184 return len;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001185}
1186
1187/* Prepare the device_attr for registration with sysfs later */
1188static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store);
1189
1190/* sm501fb_show_regs
1191 *
1192 * show the primary sm501 registers
1193*/
1194static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
1195 unsigned int start, unsigned int len)
1196{
1197 void __iomem *mem = info->regs;
1198 char *buf = ptr;
1199 unsigned int reg;
1200
1201 for (reg = start; reg < (len + start); reg += 4)
1202 ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg));
1203
1204 return ptr - buf;
1205}
1206
1207/* sm501fb_debug_show_crt
1208 *
1209 * show the crt control and cursor registers
1210*/
1211
1212static ssize_t sm501fb_debug_show_crt(struct device *dev,
1213 struct device_attribute *attr, char *buf)
1214{
1215 struct sm501fb_info *info = dev_get_drvdata(dev);
1216 char *ptr = buf;
1217
1218 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40);
1219 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10);
1220
1221 return ptr - buf;
1222}
1223
1224static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL);
1225
1226/* sm501fb_debug_show_pnl
1227 *
1228 * show the panel control and cursor registers
1229*/
1230
1231static ssize_t sm501fb_debug_show_pnl(struct device *dev,
1232 struct device_attribute *attr, char *buf)
1233{
1234 struct sm501fb_info *info = dev_get_drvdata(dev);
1235 char *ptr = buf;
1236
1237 ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40);
1238 ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10);
1239
1240 return ptr - buf;
1241}
1242
1243static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL);
1244
1245/* framebuffer ops */
1246
1247static struct fb_ops sm501fb_ops_crt = {
1248 .owner = THIS_MODULE,
1249 .fb_check_var = sm501fb_check_var_crt,
1250 .fb_set_par = sm501fb_set_par_crt,
1251 .fb_blank = sm501fb_blank_crt,
1252 .fb_setcolreg = sm501fb_setcolreg,
1253 .fb_pan_display = sm501fb_pan_crt,
1254 .fb_cursor = sm501fb_cursor,
1255 .fb_fillrect = cfb_fillrect,
1256 .fb_copyarea = cfb_copyarea,
1257 .fb_imageblit = cfb_imageblit,
1258};
1259
1260static struct fb_ops sm501fb_ops_pnl = {
1261 .owner = THIS_MODULE,
1262 .fb_check_var = sm501fb_check_var_pnl,
1263 .fb_set_par = sm501fb_set_par_pnl,
1264 .fb_pan_display = sm501fb_pan_pnl,
1265 .fb_blank = sm501fb_blank_pnl,
1266 .fb_setcolreg = sm501fb_setcolreg,
1267 .fb_cursor = sm501fb_cursor,
1268 .fb_fillrect = cfb_fillrect,
1269 .fb_copyarea = cfb_copyarea,
1270 .fb_imageblit = cfb_imageblit,
1271};
1272
Ben Dooks5fc404e2007-02-20 13:58:21 -08001273/* sm501_init_cursor
1274 *
1275 * initialise hw cursor parameters
1276*/
1277
Adrian Bunk9540f752007-02-28 20:11:06 -08001278static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001279{
Ben Dooks9b599fb2008-07-23 21:31:36 -07001280 struct sm501fb_par *par;
1281 struct sm501fb_info *info;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001282 int ret;
1283
Ben Dooks9b599fb2008-07-23 21:31:36 -07001284 if (fbi == NULL)
1285 return 0;
1286
1287 par = fbi->par;
1288 info = par->info;
1289
Ben Dooks5fc404e2007-02-20 13:58:21 -08001290 par->cursor_regs = info->regs + reg_base;
1291
1292 ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
1293 if (ret < 0)
1294 return ret;
1295
1296 /* initialise the colour registers */
1297
1298 writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR);
1299
1300 writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
1301 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
1302 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
1303 sm501fb_sync_regs(info);
1304
1305 return 0;
1306}
1307
1308/* sm501fb_info_start
1309 *
1310 * fills the par structure claiming resources and remapping etc.
1311*/
1312
1313static int sm501fb_start(struct sm501fb_info *info,
1314 struct platform_device *pdev)
1315{
1316 struct resource *res;
Ben Dooks9b599fb2008-07-23 21:31:36 -07001317 struct device *dev = &pdev->dev;
Magnus Dammb1230ee2008-02-06 01:39:25 -08001318 int k;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001319 int ret;
1320
Ben Dooks5fc404e2007-02-20 13:58:21 -08001321 info->irq = ret = platform_get_irq(pdev, 0);
1322 if (ret < 0) {
1323 /* we currently do not use the IRQ */
1324 dev_warn(dev, "no irq for device\n");
1325 }
1326
1327 /* allocate, reserve and remap resources for registers */
1328 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1329 if (res == NULL) {
1330 dev_err(dev, "no resource definition for registers\n");
1331 ret = -ENOENT;
1332 goto err_release;
1333 }
1334
1335 info->regs_res = request_mem_region(res->start,
1336 res->end - res->start,
1337 pdev->name);
1338
1339 if (info->regs_res == NULL) {
1340 dev_err(dev, "cannot claim registers\n");
1341 ret = -ENXIO;
1342 goto err_release;
1343 }
1344
1345 info->regs = ioremap(res->start, (res->end - res->start)+1);
1346 if (info->regs == NULL) {
1347 dev_err(dev, "cannot remap registers\n");
1348 ret = -ENXIO;
1349 goto err_regs_res;
1350 }
1351
1352 /* allocate, reserve resources for framebuffer */
1353 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
1354 if (res == NULL) {
1355 dev_err(dev, "no memory resource defined\n");
1356 ret = -ENXIO;
1357 goto err_regs_map;
1358 }
1359
1360 info->fbmem_res = request_mem_region(res->start,
1361 (res->end - res->start)+1,
1362 pdev->name);
1363 if (info->fbmem_res == NULL) {
1364 dev_err(dev, "cannot claim framebuffer\n");
1365 ret = -ENXIO;
1366 goto err_regs_map;
1367 }
1368
1369 info->fbmem = ioremap(res->start, (res->end - res->start)+1);
1370 if (info->fbmem == NULL) {
1371 dev_err(dev, "cannot remap framebuffer\n");
1372 goto err_mem_res;
1373 }
1374
1375 info->fbmem_len = (res->end - res->start)+1;
1376
Magnus Dammb1230ee2008-02-06 01:39:25 -08001377 /* clear framebuffer memory - avoids garbage data on unused fb */
1378 memset(info->fbmem, 0, info->fbmem_len);
1379
1380 /* clear palette ram - undefined at power on */
1381 for (k = 0; k < (256 * 3); k++)
1382 writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
1383
Ben Dooks5fc404e2007-02-20 13:58:21 -08001384 /* enable display controller */
1385 sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
1386
1387 /* setup cursors */
1388
1389 sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR);
1390 sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR);
1391
1392 return 0; /* everything is setup */
1393
1394 err_mem_res:
1395 release_resource(info->fbmem_res);
1396 kfree(info->fbmem_res);
1397
1398 err_regs_map:
1399 iounmap(info->regs);
1400
1401 err_regs_res:
1402 release_resource(info->regs_res);
1403 kfree(info->regs_res);
1404
1405 err_release:
1406 return ret;
1407}
1408
1409static void sm501fb_stop(struct sm501fb_info *info)
1410{
1411 /* disable display controller */
1412 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1413
1414 iounmap(info->fbmem);
1415 release_resource(info->fbmem_res);
1416 kfree(info->fbmem_res);
1417
1418 iounmap(info->regs);
1419 release_resource(info->regs_res);
1420 kfree(info->regs_res);
1421}
1422
Ben Dooks5fc404e2007-02-20 13:58:21 -08001423static int sm501fb_init_fb(struct fb_info *fb,
1424 enum sm501_controller head,
1425 const char *fbname)
1426{
1427 struct sm501_platdata_fbsub *pd;
1428 struct sm501fb_par *par = fb->par;
1429 struct sm501fb_info *info = par->info;
1430 unsigned long ctrl;
1431 unsigned int enable;
1432 int ret;
1433
1434 switch (head) {
1435 case HEAD_CRT:
1436 pd = info->pdata->fb_crt;
1437 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1438 enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
1439
1440 /* ensure we set the correct source register */
1441 if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
1442 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1443 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1444 }
1445
1446 break;
1447
1448 case HEAD_PANEL:
1449 pd = info->pdata->fb_pnl;
1450 ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL);
1451 enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
1452 break;
1453
1454 default:
1455 pd = NULL; /* stop compiler warnings */
1456 ctrl = 0;
1457 enable = 0;
1458 BUG();
1459 }
1460
1461 dev_info(info->dev, "fb %s %sabled at start\n",
1462 fbname, enable ? "en" : "dis");
1463
1464 /* check to see if our routing allows this */
1465
1466 if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
1467 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1468 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1469 enable = 0;
1470 }
1471
1472 strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id));
1473
1474 memcpy(&par->ops,
1475 (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
1476 sizeof(struct fb_ops));
1477
1478 /* update ops dependant on what we've been passed */
1479
1480 if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
1481 par->ops.fb_cursor = NULL;
1482
1483 fb->fbops = &par->ops;
1484 fb->flags = FBINFO_FLAG_DEFAULT |
1485 FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
1486
1487 /* fixed data */
1488
1489 fb->fix.type = FB_TYPE_PACKED_PIXELS;
1490 fb->fix.type_aux = 0;
1491 fb->fix.xpanstep = 1;
1492 fb->fix.ypanstep = 1;
1493 fb->fix.ywrapstep = 0;
1494 fb->fix.accel = FB_ACCEL_NONE;
1495
1496 /* screenmode */
1497
1498 fb->var.nonstd = 0;
1499 fb->var.activate = FB_ACTIVATE_NOW;
1500 fb->var.accel_flags = 0;
1501 fb->var.vmode = FB_VMODE_NONINTERLACED;
1502 fb->var.bits_per_pixel = 16;
1503
1504 if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
1505 /* TODO read the mode from the current display */
1506
1507 } else {
1508 if (pd->def_mode) {
1509 dev_info(info->dev, "using supplied mode\n");
1510 fb_videomode_to_var(&fb->var, pd->def_mode);
1511
1512 fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8;
1513 fb->var.xres_virtual = fb->var.xres;
1514 fb->var.yres_virtual = fb->var.yres;
1515 } else {
1516 ret = fb_find_mode(&fb->var, fb,
1517 NULL, NULL, 0, NULL, 8);
1518
1519 if (ret == 0 || ret == 4) {
1520 dev_err(info->dev,
1521 "failed to get initial mode\n");
1522 return -EINVAL;
1523 }
1524 }
1525 }
1526
1527 /* initialise and set the palette */
1528 fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0);
1529 fb_set_cmap(&fb->cmap, fb);
1530
1531 ret = (fb->fbops->fb_check_var)(&fb->var, fb);
1532 if (ret)
1533 dev_err(info->dev, "check_var() failed on initial setup?\n");
1534
1535 /* ensure we've activated our new configuration */
1536 (fb->fbops->fb_set_par)(fb);
1537
1538 return 0;
1539}
1540
1541/* default platform data if none is supplied (ie, PCI device) */
1542
1543static struct sm501_platdata_fbsub sm501fb_pdata_crt = {
1544 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1545 SM501FB_FLAG_USE_HWCURSOR |
1546 SM501FB_FLAG_USE_HWACCEL |
1547 SM501FB_FLAG_DISABLE_AT_EXIT),
1548
1549};
1550
1551static struct sm501_platdata_fbsub sm501fb_pdata_pnl = {
1552 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1553 SM501FB_FLAG_USE_HWCURSOR |
1554 SM501FB_FLAG_USE_HWACCEL |
1555 SM501FB_FLAG_DISABLE_AT_EXIT),
1556};
1557
1558static struct sm501_platdata_fb sm501fb_def_pdata = {
1559 .fb_route = SM501_FB_OWN,
1560 .fb_crt = &sm501fb_pdata_crt,
1561 .fb_pnl = &sm501fb_pdata_pnl,
1562};
1563
1564static char driver_name_crt[] = "sm501fb-crt";
1565static char driver_name_pnl[] = "sm501fb-panel";
1566
Ben Dooks9b599fb2008-07-23 21:31:36 -07001567static int __devinit sm501fb_probe_one(struct sm501fb_info *info,
1568 enum sm501_controller head)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001569{
Ben Dooks9b599fb2008-07-23 21:31:36 -07001570 unsigned char *name = (head == HEAD_CRT) ? "crt" : "panel";
1571 struct sm501_platdata_fbsub *pd;
1572 struct sm501fb_par *par;
1573 struct fb_info *fbi;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001574
Ben Dooks9b599fb2008-07-23 21:31:36 -07001575 pd = (head == HEAD_CRT) ? info->pdata->fb_crt : info->pdata->fb_pnl;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001576
Ben Dooks9b599fb2008-07-23 21:31:36 -07001577 /* Do not initialise if we've not been given any platform data */
1578 if (pd == NULL) {
1579 dev_info(info->dev, "no data for fb %s (disabled)\n", name);
1580 return 0;
1581 }
1582
1583 fbi = framebuffer_alloc(sizeof(struct sm501fb_par), info->dev);
1584 if (fbi == NULL) {
1585 dev_err(info->dev, "cannot allocate %s framebuffer\n", name);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001586 return -ENOMEM;
1587 }
1588
Ben Dooks9b599fb2008-07-23 21:31:36 -07001589 par = fbi->par;
1590 par->info = info;
1591 par->head = head;
1592 fbi->pseudo_palette = &par->pseudo_palette;
1593
1594 info->fb[head] = fbi;
1595
1596 return 0;
1597}
1598
1599/* Free up anything allocated by sm501fb_init_fb */
1600
1601static void sm501_free_init_fb(struct sm501fb_info *info,
1602 enum sm501_controller head)
1603{
1604 struct fb_info *fbi = info->fb[head];
1605
1606 fb_dealloc_cmap(&fbi->cmap);
1607}
1608
1609static int __devinit sm501fb_start_one(struct sm501fb_info *info,
1610 enum sm501_controller head,
1611 const char *drvname)
1612{
1613 struct fb_info *fbi = info->fb[head];
1614 int ret;
1615
1616 if (!fbi)
1617 return 0;
1618
1619 ret = sm501fb_init_fb(info->fb[head], head, drvname);
1620 if (ret) {
1621 dev_err(info->dev, "cannot initialise fb %s\n", drvname);
1622 return ret;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001623 }
1624
Ben Dooks9b599fb2008-07-23 21:31:36 -07001625 ret = register_framebuffer(info->fb[head]);
1626 if (ret) {
1627 dev_err(info->dev, "failed to register fb %s\n", drvname);
1628 sm501_free_init_fb(info, head);
1629 return ret;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001630 }
1631
Ben Dooks9b599fb2008-07-23 21:31:36 -07001632 dev_info(info->dev, "fb%d: %s frame buffer\n", fbi->node, fbi->fix.id);
1633
1634 return 0;
1635}
1636
1637static int __devinit sm501fb_probe(struct platform_device *pdev)
1638{
1639 struct sm501fb_info *info;
1640 struct device *dev = &pdev->dev;
1641 int ret;
1642
1643 /* allocate our framebuffers */
1644
1645 info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
1646 if (!info) {
1647 dev_err(dev, "failed to allocate state\n");
1648 return -ENOMEM;
1649 }
1650
1651 info->dev = dev = &pdev->dev;
1652 platform_set_drvdata(pdev, info);
1653
Ben Dooks5fc404e2007-02-20 13:58:21 -08001654 if (dev->parent->platform_data) {
1655 struct sm501_platdata *pd = dev->parent->platform_data;
1656 info->pdata = pd->fb;
1657 }
1658
1659 if (info->pdata == NULL) {
1660 dev_info(dev, "using default configuration data\n");
1661 info->pdata = &sm501fb_def_pdata;
1662 }
1663
Ben Dooks9b599fb2008-07-23 21:31:36 -07001664 /* probe for the presence of each panel */
1665
1666 ret = sm501fb_probe_one(info, HEAD_CRT);
1667 if (ret < 0) {
1668 dev_err(dev, "failed to probe CRT\n");
1669 goto err_alloc;
1670 }
1671
1672 ret = sm501fb_probe_one(info, HEAD_PANEL);
1673 if (ret < 0) {
1674 dev_err(dev, "failed to probe PANEL\n");
1675 goto err_probed_crt;
1676 }
1677
1678 if (info->fb[HEAD_PANEL] == NULL &&
1679 info->fb[HEAD_CRT] == NULL) {
1680 dev_err(dev, "no framebuffers found\n");
1681 goto err_alloc;
1682 }
1683
1684 /* get the resources for both of the framebuffers */
Ben Dooks5fc404e2007-02-20 13:58:21 -08001685
1686 ret = sm501fb_start(info, pdev);
1687 if (ret) {
1688 dev_err(dev, "cannot initialise SM501\n");
Ben Dooks9b599fb2008-07-23 21:31:36 -07001689 goto err_probed_panel;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001690 }
1691
Ben Dooks9b599fb2008-07-23 21:31:36 -07001692 ret = sm501fb_start_one(info, HEAD_CRT, driver_name_crt);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001693 if (ret) {
Ben Dooks9b599fb2008-07-23 21:31:36 -07001694 dev_err(dev, "failed to start CRT\n");
1695 goto err_started;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001696 }
1697
Ben Dooks9b599fb2008-07-23 21:31:36 -07001698 ret = sm501fb_start_one(info, HEAD_PANEL, driver_name_pnl);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001699 if (ret) {
Ben Dooks9b599fb2008-07-23 21:31:36 -07001700 dev_err(dev, "failed to start Panel\n");
1701 goto err_started_crt;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001702 }
1703
Ben Dooks5fc404e2007-02-20 13:58:21 -08001704 /* create device files */
1705
1706 ret = device_create_file(dev, &dev_attr_crt_src);
1707 if (ret)
Ben Dooks9b599fb2008-07-23 21:31:36 -07001708 goto err_started_panel;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001709
1710 ret = device_create_file(dev, &dev_attr_fbregs_pnl);
1711 if (ret)
Ben Dooks9b599fb2008-07-23 21:31:36 -07001712 goto err_attached_crtsrc_file;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001713
1714 ret = device_create_file(dev, &dev_attr_fbregs_crt);
1715 if (ret)
Ben Dooks9b599fb2008-07-23 21:31:36 -07001716 goto err_attached_pnlregs_file;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001717
1718 /* we registered, return ok */
1719 return 0;
1720
Ben Dooks9b599fb2008-07-23 21:31:36 -07001721err_attached_pnlregs_file:
Ben Dooks5fc404e2007-02-20 13:58:21 -08001722 device_remove_file(dev, &dev_attr_fbregs_pnl);
1723
Ben Dooks9b599fb2008-07-23 21:31:36 -07001724err_attached_crtsrc_file:
Ben Dooks5fc404e2007-02-20 13:58:21 -08001725 device_remove_file(dev, &dev_attr_crt_src);
1726
Ben Dooks9b599fb2008-07-23 21:31:36 -07001727err_started_panel:
1728 unregister_framebuffer(info->fb[HEAD_PANEL]);
1729 sm501_free_init_fb(info, HEAD_PANEL);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001730
Ben Dooks9b599fb2008-07-23 21:31:36 -07001731err_started_crt:
1732 unregister_framebuffer(info->fb[HEAD_CRT]);
1733 sm501_free_init_fb(info, HEAD_CRT);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001734
Ben Dooks9b599fb2008-07-23 21:31:36 -07001735err_started:
Ben Dooks5fc404e2007-02-20 13:58:21 -08001736 sm501fb_stop(info);
1737
Ben Dooks9b599fb2008-07-23 21:31:36 -07001738err_probed_panel:
1739 framebuffer_release(info->fb[HEAD_PANEL]);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001740
Ben Dooks9b599fb2008-07-23 21:31:36 -07001741err_probed_crt:
1742 framebuffer_release(info->fb[HEAD_CRT]);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001743
Ben Dooks9b599fb2008-07-23 21:31:36 -07001744err_alloc:
1745 kfree(info);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001746
1747 return ret;
1748}
1749
1750
1751/*
1752 * Cleanup
1753 */
1754static int sm501fb_remove(struct platform_device *pdev)
1755{
1756 struct sm501fb_info *info = platform_get_drvdata(pdev);
1757 struct fb_info *fbinfo_crt = info->fb[0];
1758 struct fb_info *fbinfo_pnl = info->fb[1];
1759
1760 device_remove_file(&pdev->dev, &dev_attr_fbregs_crt);
1761 device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
1762 device_remove_file(&pdev->dev, &dev_attr_crt_src);
1763
Ben Dooks9b599fb2008-07-23 21:31:36 -07001764 sm501_free_init_fb(info, HEAD_CRT);
1765 sm501_free_init_fb(info, HEAD_PANEL);
1766
Ben Dooks5fc404e2007-02-20 13:58:21 -08001767 unregister_framebuffer(fbinfo_crt);
1768 unregister_framebuffer(fbinfo_pnl);
1769
1770 sm501fb_stop(info);
Ben Dooks9b599fb2008-07-23 21:31:36 -07001771 kfree(info);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001772
1773 framebuffer_release(fbinfo_pnl);
1774 framebuffer_release(fbinfo_crt);
1775
1776 return 0;
1777}
1778
1779#ifdef CONFIG_PM
1780
1781static int sm501fb_suspend_fb(struct sm501fb_info *info,
1782 enum sm501_controller head)
1783{
1784 struct fb_info *fbi = info->fb[head];
1785 struct sm501fb_par *par = fbi->par;
1786
1787 if (par->screen.size == 0)
1788 return 0;
1789
Ben Dooks40488db2008-02-06 01:39:38 -08001790 /* blank the relevant interface to ensure unit power minimised */
1791 (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi);
1792
1793 /* tell console/fb driver we are suspending */
1794
1795 acquire_console_sem();
1796 fb_set_suspend(fbi, 1);
1797 release_console_sem();
1798
Ben Dooks5fc404e2007-02-20 13:58:21 -08001799 /* backup copies in case chip is powered down over suspend */
1800
1801 par->store_fb = vmalloc(par->screen.size);
1802 if (par->store_fb == NULL) {
1803 dev_err(info->dev, "no memory to store screen\n");
1804 return -ENOMEM;
1805 }
1806
1807 par->store_cursor = vmalloc(par->cursor.size);
1808 if (par->store_cursor == NULL) {
1809 dev_err(info->dev, "no memory to store cursor\n");
1810 goto err_nocursor;
1811 }
1812
Ben Dooksc1f303b2007-10-16 01:28:37 -07001813 dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb);
1814 dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor);
1815
Ben Dooks5fc404e2007-02-20 13:58:21 -08001816 memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size);
1817 memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size);
Ben Dooksf22e5212007-10-16 01:28:38 -07001818
Ben Dooks5fc404e2007-02-20 13:58:21 -08001819 return 0;
1820
1821 err_nocursor:
1822 vfree(par->store_fb);
Ben Dooksc1f303b2007-10-16 01:28:37 -07001823 par->store_fb = NULL;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001824
1825 return -ENOMEM;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001826}
1827
1828static void sm501fb_resume_fb(struct sm501fb_info *info,
1829 enum sm501_controller head)
1830{
1831 struct fb_info *fbi = info->fb[head];
1832 struct sm501fb_par *par = fbi->par;
1833
1834 if (par->screen.size == 0)
1835 return;
1836
1837 /* re-activate the configuration */
1838
1839 (par->ops.fb_set_par)(fbi);
1840
1841 /* restore the data */
1842
Ben Dooksc1f303b2007-10-16 01:28:37 -07001843 dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb);
1844 dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor);
1845
1846 if (par->store_fb)
1847 memcpy_toio(par->screen.k_addr, par->store_fb,
1848 par->screen.size);
1849
1850 if (par->store_cursor)
1851 memcpy_toio(par->cursor.k_addr, par->store_cursor,
1852 par->cursor.size);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001853
Ben Dooksf22e5212007-10-16 01:28:38 -07001854 acquire_console_sem();
1855 fb_set_suspend(fbi, 0);
1856 release_console_sem();
1857
Ben Dooks5fc404e2007-02-20 13:58:21 -08001858 vfree(par->store_fb);
1859 vfree(par->store_cursor);
1860}
1861
1862
1863/* suspend and resume support */
1864
1865static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
1866{
1867 struct sm501fb_info *info = platform_get_drvdata(pdev);
1868
Ben Dooksc1f303b2007-10-16 01:28:37 -07001869 /* store crt control to resume with */
1870 info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1871
Ben Dooks5fc404e2007-02-20 13:58:21 -08001872 sm501fb_suspend_fb(info, HEAD_CRT);
1873 sm501fb_suspend_fb(info, HEAD_PANEL);
1874
1875 /* turn off the clocks, in case the device is not powered down */
1876 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1877
1878 return 0;
1879}
1880
Ben Dooksc1f303b2007-10-16 01:28:37 -07001881#define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP | \
1882 SM501_DC_CRT_CONTROL_SEL)
1883
1884
Ben Dooks5fc404e2007-02-20 13:58:21 -08001885static int sm501fb_resume(struct platform_device *pdev)
1886{
1887 struct sm501fb_info *info = platform_get_drvdata(pdev);
Ben Dooksc1f303b2007-10-16 01:28:37 -07001888 unsigned long crt_ctrl;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001889
1890 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1);
1891
Ben Dooksc1f303b2007-10-16 01:28:37 -07001892 /* restore the items we want to be saved for crt control */
1893
1894 crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1895 crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
1896 crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
1897 writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
1898
Ben Dooks5fc404e2007-02-20 13:58:21 -08001899 sm501fb_resume_fb(info, HEAD_CRT);
1900 sm501fb_resume_fb(info, HEAD_PANEL);
1901
1902 return 0;
1903}
1904
1905#else
1906#define sm501fb_suspend NULL
1907#define sm501fb_resume NULL
1908#endif
1909
1910static struct platform_driver sm501fb_driver = {
1911 .probe = sm501fb_probe,
1912 .remove = sm501fb_remove,
1913 .suspend = sm501fb_suspend,
1914 .resume = sm501fb_resume,
1915 .driver = {
1916 .name = "sm501-fb",
1917 .owner = THIS_MODULE,
1918 },
1919};
1920
Adrian Bunk9540f752007-02-28 20:11:06 -08001921static int __devinit sm501fb_init(void)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001922{
1923 return platform_driver_register(&sm501fb_driver);
1924}
1925
1926static void __exit sm501fb_cleanup(void)
1927{
1928 platform_driver_unregister(&sm501fb_driver);
1929}
1930
1931module_init(sm501fb_init);
1932module_exit(sm501fb_cleanup);
1933
1934MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
1935MODULE_DESCRIPTION("SM501 Framebuffer driver");
1936MODULE_LICENSE("GPL v2");