blob: 4777a1cbcd8d6f7f7f9b032f9f1bbe385f1f6538 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */
2/*
3 Written 1992-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency. This software may be used and
7 distributed according to the terms of the GNU General Public License,
8 incorporated herein by reference.
9
10 The author may be reached as becker@scyld.com, or C/O
11 Scyld Computing Corporation
12 410 Severn Ave., Suite 210
13 Annapolis MD 21403
14
15
16 This driver should work with the 3c503 and 3c503/16. It should be used
17 in shared memory mode for best performance, although it may also work
18 in programmed-I/O mode.
19
20 Sources:
21 EtherLink II Technical Reference Manual,
22 EtherLink II/16 Technical Reference Manual Supplement,
23 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145
24
25 The Crynwr 3c503 packet driver.
26
27 Changelog:
28
29 Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards.
30 Paul Gortmaker : multiple card support for module users.
31 rjohnson@analogic.com : Fix up PIO interface for efficient operation.
32 Jeff Garzik : ethtool support
33
34*/
35
36#define DRV_NAME "3c503"
37#define DRV_VERSION "1.10a"
38#define DRV_RELDATE "11/17/2001"
39
40
41static const char version[] =
42 DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n";
43
44#include <linux/module.h>
45#include <linux/kernel.h>
46#include <linux/errno.h>
47#include <linux/string.h>
48#include <linux/delay.h>
49#include <linux/netdevice.h>
50#include <linux/etherdevice.h>
51#include <linux/init.h>
52#include <linux/ethtool.h>
53
54#include <asm/uaccess.h>
55#include <asm/io.h>
56#include <asm/system.h>
57#include <asm/byteorder.h>
58
59#include "8390.h"
60#include "3c503.h"
61#define WRD_COUNT 4
62
63static int el2_pio_probe(struct net_device *dev);
64static int el2_probe1(struct net_device *dev, int ioaddr);
65
66/* A zero-terminated list of I/O addresses to be probed in PIO mode. */
67static unsigned int netcard_portlist[] __initdata =
68 { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0};
69
70#define EL2_IO_EXTENT 16
71
72static int el2_open(struct net_device *dev);
73static int el2_close(struct net_device *dev);
74static void el2_reset_8390(struct net_device *dev);
75static void el2_init_card(struct net_device *dev);
76static void el2_block_output(struct net_device *dev, int count,
77 const unsigned char *buf, int start_page);
78static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb,
79 int ring_offset);
80static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
81 int ring_page);
Jeff Garzik7282d492006-09-13 14:30:00 -040082static const struct ethtool_ops netdev_ethtool_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -070083
Jeff Garzik6aa20a22006-09-13 13:24:59 -040084
Linus Torvalds1da177e2005-04-16 15:20:36 -070085/* This routine probes for a memory-mapped 3c503 board by looking for
86 the "location register" at the end of the jumpered boot PROM space.
87 This works even if a PROM isn't there.
88
89 If the ethercard isn't found there is an optional probe for
90 ethercard jumpered to programmed-I/O mode.
91 */
92static int __init do_el2_probe(struct net_device *dev)
93{
94 int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0};
95 int base_addr = dev->base_addr;
96 int irq = dev->irq;
97
Linus Torvalds1da177e2005-04-16 15:20:36 -070098 if (base_addr > 0x1ff) /* Check a single specified location. */
99 return el2_probe1(dev, base_addr);
100 else if (base_addr != 0) /* Don't probe at all. */
101 return -ENXIO;
102
103 for (addr = addrs; *addr; addr++) {
104 void __iomem *p = ioremap(*addr, 1);
105 unsigned base_bits;
106 int i;
107
108 if (!p)
109 continue;
110 base_bits = readb(p);
111 iounmap(p);
112 i = ffs(base_bits) - 1;
113 if (i == -1 || base_bits != (1 << i))
114 continue;
115 if (el2_probe1(dev, netcard_portlist[i]) == 0)
116 return 0;
117 dev->irq = irq;
118 }
119#if ! defined(no_probe_nonshared_memory)
120 return el2_pio_probe(dev);
121#else
122 return -ENODEV;
123#endif
124}
125
126/* Try all of the locations that aren't obviously empty. This touches
127 a lot of locations, and is much riskier than the code above. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400128static int __init
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129el2_pio_probe(struct net_device *dev)
130{
131 int i;
132 int base_addr = dev->base_addr;
133 int irq = dev->irq;
134
135 if (base_addr > 0x1ff) /* Check a single specified location. */
136 return el2_probe1(dev, base_addr);
137 else if (base_addr != 0) /* Don't probe at all. */
138 return -ENXIO;
139
140 for (i = 0; netcard_portlist[i]; i++) {
141 if (el2_probe1(dev, netcard_portlist[i]) == 0)
142 return 0;
143 dev->irq = irq;
144 }
145
146 return -ENODEV;
147}
148
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149#ifndef MODULE
150struct net_device * __init el2_probe(int unit)
151{
Alan Cox055e5112008-07-03 23:43:12 -0700152 struct net_device *dev = alloc_eip_netdev();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153 int err;
154
155 if (!dev)
156 return ERR_PTR(-ENOMEM);
157
158 sprintf(dev->name, "eth%d", unit);
159 netdev_boot_setup_check(dev);
160
161 err = do_el2_probe(dev);
162 if (err)
163 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165out:
166 free_netdev(dev);
167 return ERR_PTR(err);
168}
169#endif
170
Stephen Hemminger53cdd282008-11-25 18:26:20 -0800171static const struct net_device_ops el2_netdev_ops = {
172 .ndo_open = el2_open,
173 .ndo_stop = el2_close,
174
175 .ndo_start_xmit = eip_start_xmit,
176 .ndo_tx_timeout = eip_tx_timeout,
177 .ndo_get_stats = eip_get_stats,
178 .ndo_set_multicast_list = eip_set_multicast_list,
179 .ndo_validate_addr = eth_validate_addr,
Stephen Hemmingerfe96aaa2009-01-09 11:13:14 +0000180 .ndo_set_mac_address = eth_mac_addr,
Stephen Hemminger53cdd282008-11-25 18:26:20 -0800181 .ndo_change_mtu = eth_change_mtu,
182#ifdef CONFIG_NET_POLL_CONTROLLER
183 .ndo_poll_controller = eip_poll,
184#endif
185};
186
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187/* Probe for the Etherlink II card at I/O port base IOADDR,
188 returning non-zero on success. If found, set the station
189 address and memory parameters in DEVICE. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400190static int __init
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191el2_probe1(struct net_device *dev, int ioaddr)
192{
193 int i, iobase_reg, membase_reg, saved_406, wordlength, retval;
194 static unsigned version_printed;
195 unsigned long vendor_id;
196
197 if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME))
198 return -EBUSY;
199
200 if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) {
201 retval = -EBUSY;
202 goto out;
203 }
204
205 /* Reset and/or avoid any lurking NE2000 */
206 if (inb(ioaddr + 0x408) == 0xff) {
207 mdelay(1);
208 retval = -ENODEV;
209 goto out1;
210 }
211
212 /* We verify that it's a 3C503 board by checking the first three octets
213 of its ethernet address. */
214 iobase_reg = inb(ioaddr+0x403);
215 membase_reg = inb(ioaddr+0x404);
216 /* ASIC location registers should be 0 or have only a single bit set. */
Joe Perches8e95a202009-12-03 07:58:21 +0000217 if ((iobase_reg & (iobase_reg - 1)) ||
218 (membase_reg & (membase_reg - 1))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700219 retval = -ENODEV;
220 goto out1;
221 }
222 saved_406 = inb_p(ioaddr + 0x406);
223 outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */
224 outb_p(ECNTRL_THIN, ioaddr + 0x406);
225 /* Map the station addr PROM into the lower I/O ports. We now check
226 for both the old and new 3Com prefix */
227 outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406);
228 vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2);
229 if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) {
230 /* Restore the register we frobbed. */
231 outb(saved_406, ioaddr + 0x406);
232 retval = -ENODEV;
233 goto out1;
234 }
235
236 if (ei_debug && version_printed++ == 0)
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000237 pr_debug("%s", version);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700238
239 dev->base_addr = ioaddr;
240
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000241 pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242
243 /* Retrieve and print the ethernet address. */
244 for (i = 0; i < 6; i++)
Joe Perches0795af52007-10-03 17:59:30 -0700245 dev->dev_addr[i] = inb(ioaddr + i);
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000246 pr_cont("%pM", dev->dev_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247
248 /* Map the 8390 back into the window. */
249 outb(ECNTRL_THIN, ioaddr + 0x406);
250
251 /* Check for EL2/16 as described in tech. man. */
252 outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
253 outb_p(0, ioaddr + EN0_DCFG);
254 outb_p(E8390_PAGE2, ioaddr + E8390_CMD);
255 wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS;
256 outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
257
258 /* Probe for, turn on and clear the board's shared memory. */
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000259 if (ei_debug > 2)
260 pr_cont(" memory jumpers %2.2x ", membase_reg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */
262
263 /* This should be probed for (or set via an ioctl()) at run-time.
264 Right now we use a sleazy hack to pass in the interface number
265 at boot-time via the low bits of the mem_end field. That value is
266 unused, and the low bits would be discarded even if it was used. */
267#if defined(EI8390_THICK) || defined(EL2_AUI)
268 ei_status.interface_num = 1;
269#else
270 ei_status.interface_num = dev->mem_end & 0xf;
271#endif
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000272 pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273
274 if ((membase_reg & 0xf0) == 0) {
275 dev->mem_start = 0;
276 ei_status.name = "3c503-PIO";
277 ei_status.mem = NULL;
278 } else {
279 dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) +
280 ((membase_reg & 0xA0) ? 0x4000 : 0);
281#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256
282 ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE);
283
284#ifdef EL2MEMTEST
285 /* This has never found an error, but someone might care.
286 Note that it only tests the 2nd 8kB on 16kB 3c503/16
287 cards between card addr. 0x2000 and 0x3fff. */
288 { /* Check the card's memory. */
289 void __iomem *mem_base = ei_status.mem;
290 unsigned int test_val = 0xbbadf00d;
291 writel(0xba5eba5e, mem_base);
292 for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
293 writel(test_val, mem_base + i);
Joe Perches8e95a202009-12-03 07:58:21 +0000294 if (readl(mem_base) != 0xba5eba5e ||
295 readl(mem_base + i) != test_val) {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000296 pr_warning("3c503: memory failure or memory address conflict.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 dev->mem_start = 0;
298 ei_status.name = "3c503-PIO";
299 iounmap(mem_base);
300 ei_status.mem = NULL;
301 break;
302 }
303 test_val += 0x55555555;
304 writel(0, mem_base + i);
305 }
306 }
307#endif /* EL2MEMTEST */
308
309 if (dev->mem_start)
310 dev->mem_end = dev->mem_start + EL2_MEMSIZE;
311
312 if (wordlength) { /* No Tx pages to skip over to get to Rx */
313 ei_status.priv = 0;
314 ei_status.name = "3c503/16";
315 } else {
316 ei_status.priv = TX_PAGES * 256;
317 ei_status.name = "3c503";
318 }
319 }
320
321 /*
322 Divide up the memory on the card. This is the same regardless of
323 whether shared-mem or PIO is used. For 16 bit cards (16kB RAM),
324 we use the entire 8k of bank1 for an Rx ring. We only use 3k
325 of the bank0 for 2 full size Tx packet slots. For 8 bit cards,
326 (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining
327 5kB for an Rx ring. */
328
329 if (wordlength) {
330 ei_status.tx_start_page = EL2_MB0_START_PG;
331 ei_status.rx_start_page = EL2_MB1_START_PG;
332 } else {
333 ei_status.tx_start_page = EL2_MB1_START_PG;
334 ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
335 }
336
337 /* Finish setting the board's parameters. */
338 ei_status.stop_page = EL2_MB1_STOP_PG;
339 ei_status.word16 = wordlength;
Joe Perchesc061b182010-08-23 18:20:03 +0000340 ei_status.reset_8390 = el2_reset_8390;
341 ei_status.get_8390_hdr = el2_get_8390_hdr;
342 ei_status.block_input = el2_block_input;
343 ei_status.block_output = el2_block_output;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344
345 if (dev->irq == 2)
346 dev->irq = 9;
347 else if (dev->irq > 5 && dev->irq != 9) {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000348 pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349 dev->irq);
350 dev->irq = 0;
351 }
352
353 ei_status.saved_irq = dev->irq;
354
Stephen Hemminger53cdd282008-11-25 18:26:20 -0800355 dev->netdev_ops = &el2_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356 dev->ethtool_ops = &netdev_ethtool_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357
b1fc5502005-05-12 20:11:55 -0400358 retval = register_netdev(dev);
359 if (retval)
360 goto out1;
361
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362 if (dev->mem_start)
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000363 pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364 dev->name, ei_status.name, (wordlength+1)<<3,
365 dev->mem_start, dev->mem_end-1);
366
367 else
368 {
369 ei_status.tx_start_page = EL2_MB1_START_PG;
370 ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000371 pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372 dev->name, ei_status.name, (wordlength+1)<<3);
373 }
374 release_region(ioaddr + 0x400, 8);
375 return 0;
376out1:
377 release_region(ioaddr + 0x400, 8);
378out:
379 release_region(ioaddr, EL2_IO_EXTENT);
380 return retval;
381}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400382
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700383static irqreturn_t el2_probe_interrupt(int irq, void *seen)
384{
385 *(bool *)seen = true;
386 return IRQ_HANDLED;
387}
388
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389static int
390el2_open(struct net_device *dev)
391{
roel kluinab089992009-09-01 06:24:53 +0000392 int retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700393
394 if (dev->irq < 2) {
395 int irqlist[] = {5, 9, 3, 4, 0};
396 int *irqp = irqlist;
397
398 outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
399 do {
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700400 bool seen;
401
402 retval = request_irq(*irqp, el2_probe_interrupt, 0,
403 dev->name, &seen);
404 if (retval == -EBUSY)
405 continue;
406 if (retval < 0)
407 goto err_disable;
408
Linus Torvalds1da177e2005-04-16 15:20:36 -0700409 /* Twinkle the interrupt, and check if it's seen. */
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700410 seen = false;
411 smp_wmb();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
413 outb_p(0x00, E33G_IDCFR);
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700414 msleep(1);
415 free_irq(*irqp, el2_probe_interrupt);
416 if (!seen)
417 continue;
418
419 retval = request_irq(dev->irq = *irqp, eip_interrupt, 0,
420 dev->name, dev);
421 if (retval == -EBUSY)
422 continue;
423 if (retval < 0)
424 goto err_disable;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425 } while (*++irqp);
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700426
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427 if (*irqp == 0) {
Ben Hutchingsb0cf4df2010-04-07 20:55:47 -0700428 err_disable:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
roel kluinab089992009-09-01 06:24:53 +0000430 return -EAGAIN;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431 }
432 } else {
Alan Cox055e5112008-07-03 23:43:12 -0700433 if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700434 return retval;
435 }
436 }
437
438 el2_init_card(dev);
Alan Cox055e5112008-07-03 23:43:12 -0700439 eip_open(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 return 0;
441}
442
443static int
444el2_close(struct net_device *dev)
445{
446 free_irq(dev->irq, dev);
447 dev->irq = ei_status.saved_irq;
448 outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
449
Alan Cox055e5112008-07-03 23:43:12 -0700450 eip_close(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 return 0;
452}
453
454/* This is called whenever we have a unrecoverable failure:
455 transmit timeout
456 Bad ring buffer packet header
457 */
458static void
459el2_reset_8390(struct net_device *dev)
460{
461 if (ei_debug > 1) {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000462 pr_debug("%s: Resetting the 3c503 board...", dev->name);
463 pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464 E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
465 }
466 outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
467 ei_status.txing = 0;
468 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
469 el2_init_card(dev);
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000470 if (ei_debug > 1)
471 pr_cont("done\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472}
473
474/* Initialize the 3c503 GA registers after a reset. */
475static void
476el2_init_card(struct net_device *dev)
477{
478 /* Unmap the station PROM and select the DIX or BNC connector. */
479 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
480
481 /* Set ASIC copy of rx's first and last+1 buffer pages */
482 /* These must be the same as in the 8390. */
483 outb(ei_status.rx_start_page, E33G_STARTPG);
484 outb(ei_status.stop_page, E33G_STOPPG);
485
486 /* Point the vector pointer registers somewhere ?harmless?. */
487 outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */
488 outb(0xff, E33G_VP1);
489 outb(0x00, E33G_VP0);
490 /* Turn off all interrupts until we're opened. */
491 outb_p(0x00, dev->base_addr + EN0_IMR);
492 /* Enable IRQs iff started. */
493 outb(EGACFR_NORM, E33G_GACFR);
494
495 /* Set the interrupt line. */
496 outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR);
497 outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */
498 outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */
499 outb_p(0x00, E33G_DMAAL);
500 return; /* We always succeed */
501}
502
503/*
504 * Either use the shared memory (if enabled on the board) or put the packet
505 * out through the ASIC FIFO.
506 */
507static void
508el2_block_output(struct net_device *dev, int count,
509 const unsigned char *buf, int start_page)
510{
511 unsigned short int *wrd;
512 int boguscount; /* timeout counter */
513 unsigned short word; /* temporary for better machine code */
514 void __iomem *base = ei_status.mem;
515
516 if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */
517 outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR);
518 else
519 outb(EGACFR_NORM, E33G_GACFR);
520
521 if (base) { /* Shared memory transfer */
522 memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8),
523 buf, count);
524 outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */
525 return;
526 }
527
528/*
529 * No shared memory, put the packet out the other way.
530 * Set up then start the internal memory transfer to Tx Start Page
531 */
532
533 word = (unsigned short)start_page;
534 outb(word&0xFF, E33G_DMAAH);
535 outb(word>>8, E33G_DMAAL);
536
537 outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT
538 | ECNTRL_START, E33G_CNTRL);
539
540/*
541 * Here I am going to write data to the FIFO as quickly as possible.
542 * Note that E33G_FIFOH is defined incorrectly. It is really
543 * E33G_FIFOL, the lowest port address for both the byte and
544 * word write. Variable 'count' is NOT checked. Caller must supply a
545 * valid count. Note that I may write a harmless extra byte to the
546 * 8390 if the byte-count was not even.
547 */
548 wrd = (unsigned short int *) buf;
549 count = (count + 1) >> 1;
550 for(;;)
551 {
552 boguscount = 0x1000;
553 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
554 {
555 if(!boguscount--)
556 {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000557 pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 el2_reset_8390(dev);
559 goto blocked;
560 }
561 }
562 if(count > WRD_COUNT)
563 {
564 outsw(E33G_FIFOH, wrd, WRD_COUNT);
565 wrd += WRD_COUNT;
566 count -= WRD_COUNT;
567 }
568 else
569 {
570 outsw(E33G_FIFOH, wrd, count);
571 break;
572 }
573 }
574 blocked:;
575 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576}
577
578/* Read the 4 byte, page aligned 8390 specific header. */
579static void
580el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
581{
582 int boguscount;
583 void __iomem *base = ei_status.mem;
584 unsigned short word;
585
586 if (base) { /* Use the shared memory. */
587 void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8);
588 memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
589 hdr->count = le16_to_cpu(hdr->count);
590 return;
591 }
592
593/*
594 * No shared memory, use programmed I/O.
595 */
596
597 word = (unsigned short)ring_page;
598 outb(word&0xFF, E33G_DMAAH);
599 outb(word>>8, E33G_DMAAL);
600
601 outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
602 | ECNTRL_START, E33G_CNTRL);
603 boguscount = 0x1000;
604 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
605 {
606 if(!boguscount--)
607 {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000608 pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700609 memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
610 el2_reset_8390(dev);
611 goto blocked;
612 }
613 }
614 insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1);
615 blocked:;
616 outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
617}
618
619
620static void
621el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
622{
623 int boguscount = 0;
624 void __iomem *base = ei_status.mem;
625 unsigned short int *buf;
626 unsigned short word;
627
628 /* Maybe enable shared memory just be to be safe... nahh.*/
629 if (base) { /* Use the shared memory. */
630 ring_offset -= (EL2_MB1_START_PG<<8);
631 if (ring_offset + count > EL2_MEMSIZE) {
632 /* We must wrap the input move. */
633 int semi_count = EL2_MEMSIZE - ring_offset;
634 memcpy_fromio(skb->data, base + ring_offset, semi_count);
635 count -= semi_count;
636 memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count);
637 } else {
Al Viro4ec03112007-02-09 16:38:30 +0000638 memcpy_fromio(skb->data, base + ring_offset, count);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 }
640 return;
641 }
642
643/*
644 * No shared memory, use programmed I/O.
645 */
646 word = (unsigned short) ring_offset;
647 outb(word>>8, E33G_DMAAH);
648 outb(word&0xFF, E33G_DMAAL);
649
650 outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
651 | ECNTRL_START, E33G_CNTRL);
652
653/*
654 * Here I also try to get data as fast as possible. I am betting that I
655 * can read one extra byte without clobbering anything in the kernel because
656 * this would only occur on an odd byte-count and allocation of skb->data
657 * is word-aligned. Variable 'count' is NOT checked. Caller must check
658 * for a valid count.
659 * [This is currently quite safe.... but if one day the 3c503 explodes
660 * you know where to come looking ;)]
661 */
662
663 buf = (unsigned short int *) skb->data;
664 count = (count + 1) >> 1;
665 for(;;)
666 {
667 boguscount = 0x1000;
668 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
669 {
670 if(!boguscount--)
671 {
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000672 pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673 el2_reset_8390(dev);
674 goto blocked;
675 }
676 }
677 if(count > WRD_COUNT)
678 {
679 insw(E33G_FIFOH, buf, WRD_COUNT);
680 buf += WRD_COUNT;
681 count -= WRD_COUNT;
682 }
683 else
684 {
685 insw(E33G_FIFOH, buf, count);
686 break;
687 }
688 }
689 blocked:;
690 outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700691}
692
693
694static void netdev_get_drvinfo(struct net_device *dev,
695 struct ethtool_drvinfo *info)
696{
697 strcpy(info->driver, DRV_NAME);
698 strcpy(info->version, DRV_VERSION);
699 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
700}
701
Jeff Garzik7282d492006-09-13 14:30:00 -0400702static const struct ethtool_ops netdev_ethtool_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 .get_drvinfo = netdev_get_drvinfo,
704};
705
706#ifdef MODULE
707#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */
708
709static struct net_device *dev_el2[MAX_EL2_CARDS];
710static int io[MAX_EL2_CARDS];
711static int irq[MAX_EL2_CARDS];
712static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */
713module_param_array(io, int, NULL, 0);
714module_param_array(irq, int, NULL, 0);
715module_param_array(xcvr, int, NULL, 0);
716MODULE_PARM_DESC(io, "I/O base address(es)");
717MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
718MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
719MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver");
720MODULE_LICENSE("GPL");
721
722/* This is set up so that only a single autoprobe takes place per call.
723ISA device autoprobes on a running machine are not recommended. */
Randy Dunlap96e672c2006-06-10 13:33:48 -0700724int __init
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725init_module(void)
726{
727 struct net_device *dev;
728 int this_dev, found = 0;
729
730 for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
731 if (io[this_dev] == 0) {
732 if (this_dev != 0) break; /* only autoprobe 1st one */
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000733 pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734 }
Alan Cox055e5112008-07-03 23:43:12 -0700735 dev = alloc_eip_netdev();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736 if (!dev)
737 break;
738 dev->irq = irq[this_dev];
739 dev->base_addr = io[this_dev];
740 dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
741 if (do_el2_probe(dev) == 0) {
b1fc5502005-05-12 20:11:55 -0400742 dev_el2[found++] = dev;
743 continue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744 }
745 free_netdev(dev);
Alexander Beregalov646cdb32009-05-26 12:35:25 +0000746 pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700747 break;
748 }
749 if (found)
750 return 0;
751 return -ENXIO;
752}
753
Denis Vlasenko64916f12006-01-05 22:45:47 -0800754static void cleanup_card(struct net_device *dev)
755{
756 /* NB: el2_close() handles free_irq */
757 release_region(dev->base_addr, EL2_IO_EXTENT);
758 if (ei_status.mem)
759 iounmap(ei_status.mem);
760}
761
Al Viroafc8eb42006-06-14 18:50:53 -0400762void __exit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763cleanup_module(void)
764{
765 int this_dev;
766
767 for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
768 struct net_device *dev = dev_el2[this_dev];
769 if (dev) {
770 unregister_netdev(dev);
771 cleanup_card(dev);
772 free_netdev(dev);
773 }
774 }
775}
776#endif /* MODULE */