Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
Uwe Zeisberger | f30c226 | 2006-10-03 23:01:26 +0200 | [diff] [blame] | 2 | * linux/drivers/serial/21285.c |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 | * |
| 4 | * Driver for the serial port on the 21285 StrongArm-110 core logic chip. |
| 5 | * |
| 6 | * Based on drivers/char/serial.c |
| 7 | * |
| 8 | * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $ |
| 9 | */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 10 | #include <linux/module.h> |
| 11 | #include <linux/tty.h> |
| 12 | #include <linux/ioport.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/console.h> |
| 15 | #include <linux/device.h> |
| 16 | #include <linux/tty_flip.h> |
| 17 | #include <linux/serial_core.h> |
| 18 | #include <linux/serial.h> |
| 19 | |
| 20 | #include <asm/io.h> |
| 21 | #include <asm/irq.h> |
| 22 | #include <asm/mach-types.h> |
| 23 | #include <asm/hardware/dec21285.h> |
| 24 | #include <asm/hardware.h> |
| 25 | |
| 26 | #define BAUD_BASE (mem_fclk_21285/64) |
| 27 | |
| 28 | #define SERIAL_21285_NAME "ttyFB" |
| 29 | #define SERIAL_21285_MAJOR 204 |
| 30 | #define SERIAL_21285_MINOR 4 |
| 31 | |
| 32 | #define RXSTAT_DUMMY_READ 0x80000000 |
| 33 | #define RXSTAT_FRAME (1 << 0) |
| 34 | #define RXSTAT_PARITY (1 << 1) |
| 35 | #define RXSTAT_OVERRUN (1 << 2) |
| 36 | #define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) |
| 37 | |
| 38 | #define H_UBRLCR_BREAK (1 << 0) |
| 39 | #define H_UBRLCR_PARENB (1 << 1) |
| 40 | #define H_UBRLCR_PAREVN (1 << 2) |
| 41 | #define H_UBRLCR_STOPB (1 << 3) |
| 42 | #define H_UBRLCR_FIFO (1 << 4) |
| 43 | |
| 44 | static const char serial21285_name[] = "Footbridge UART"; |
| 45 | |
| 46 | #define tx_enabled(port) ((port)->unused[0]) |
| 47 | #define rx_enabled(port) ((port)->unused[1]) |
| 48 | |
| 49 | /* |
| 50 | * The documented expression for selecting the divisor is: |
| 51 | * BAUD_BASE / baud - 1 |
| 52 | * However, typically BAUD_BASE is not divisible by baud, so |
| 53 | * we want to select the divisor that gives us the minimum |
| 54 | * error. Therefore, we want: |
| 55 | * int(BAUD_BASE / baud - 0.5) -> |
| 56 | * int(BAUD_BASE / baud - (baud >> 1) / baud) -> |
| 57 | * int((BAUD_BASE - (baud >> 1)) / baud) |
| 58 | */ |
| 59 | |
Russell King | b129a8c | 2005-08-31 10:12:14 +0100 | [diff] [blame] | 60 | static void serial21285_stop_tx(struct uart_port *port) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 61 | { |
| 62 | if (tx_enabled(port)) { |
| 63 | disable_irq(IRQ_CONTX); |
| 64 | tx_enabled(port) = 0; |
| 65 | } |
| 66 | } |
| 67 | |
Russell King | b129a8c | 2005-08-31 10:12:14 +0100 | [diff] [blame] | 68 | static void serial21285_start_tx(struct uart_port *port) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 69 | { |
| 70 | if (!tx_enabled(port)) { |
| 71 | enable_irq(IRQ_CONTX); |
| 72 | tx_enabled(port) = 1; |
| 73 | } |
| 74 | } |
| 75 | |
| 76 | static void serial21285_stop_rx(struct uart_port *port) |
| 77 | { |
| 78 | if (rx_enabled(port)) { |
| 79 | disable_irq(IRQ_CONRX); |
| 80 | rx_enabled(port) = 0; |
| 81 | } |
| 82 | } |
| 83 | |
| 84 | static void serial21285_enable_ms(struct uart_port *port) |
| 85 | { |
| 86 | } |
| 87 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 88 | static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 89 | { |
| 90 | struct uart_port *port = dev_id; |
| 91 | struct tty_struct *tty = port->info->tty; |
| 92 | unsigned int status, ch, flag, rxs, max_count = 256; |
| 93 | |
| 94 | status = *CSR_UARTFLG; |
| 95 | while (!(status & 0x10) && max_count--) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 96 | ch = *CSR_UARTDR; |
| 97 | flag = TTY_NORMAL; |
| 98 | port->icount.rx++; |
| 99 | |
| 100 | rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; |
Russell King | 4584928 | 2005-04-26 15:29:44 +0100 | [diff] [blame] | 101 | if (unlikely(rxs & RXSTAT_ANYERR)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 102 | if (rxs & RXSTAT_PARITY) |
| 103 | port->icount.parity++; |
| 104 | else if (rxs & RXSTAT_FRAME) |
| 105 | port->icount.frame++; |
| 106 | if (rxs & RXSTAT_OVERRUN) |
| 107 | port->icount.overrun++; |
| 108 | |
| 109 | rxs &= port->read_status_mask; |
| 110 | |
| 111 | if (rxs & RXSTAT_PARITY) |
| 112 | flag = TTY_PARITY; |
| 113 | else if (rxs & RXSTAT_FRAME) |
| 114 | flag = TTY_FRAME; |
| 115 | } |
| 116 | |
Russell King | 05ab301 | 2005-05-09 23:21:59 +0100 | [diff] [blame] | 117 | uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); |
| 118 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 119 | status = *CSR_UARTFLG; |
| 120 | } |
| 121 | tty_flip_buffer_push(tty); |
| 122 | |
| 123 | return IRQ_HANDLED; |
| 124 | } |
| 125 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 126 | static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 127 | { |
| 128 | struct uart_port *port = dev_id; |
| 129 | struct circ_buf *xmit = &port->info->xmit; |
| 130 | int count = 256; |
| 131 | |
| 132 | if (port->x_char) { |
| 133 | *CSR_UARTDR = port->x_char; |
| 134 | port->icount.tx++; |
| 135 | port->x_char = 0; |
| 136 | goto out; |
| 137 | } |
| 138 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { |
Russell King | b129a8c | 2005-08-31 10:12:14 +0100 | [diff] [blame] | 139 | serial21285_stop_tx(port); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 140 | goto out; |
| 141 | } |
| 142 | |
| 143 | do { |
| 144 | *CSR_UARTDR = xmit->buf[xmit->tail]; |
| 145 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| 146 | port->icount.tx++; |
| 147 | if (uart_circ_empty(xmit)) |
| 148 | break; |
| 149 | } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); |
| 150 | |
| 151 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| 152 | uart_write_wakeup(port); |
| 153 | |
| 154 | if (uart_circ_empty(xmit)) |
Russell King | b129a8c | 2005-08-31 10:12:14 +0100 | [diff] [blame] | 155 | serial21285_stop_tx(port); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 156 | |
| 157 | out: |
| 158 | return IRQ_HANDLED; |
| 159 | } |
| 160 | |
| 161 | static unsigned int serial21285_tx_empty(struct uart_port *port) |
| 162 | { |
| 163 | return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; |
| 164 | } |
| 165 | |
| 166 | /* no modem control lines */ |
| 167 | static unsigned int serial21285_get_mctrl(struct uart_port *port) |
| 168 | { |
| 169 | return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; |
| 170 | } |
| 171 | |
| 172 | static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| 173 | { |
| 174 | } |
| 175 | |
| 176 | static void serial21285_break_ctl(struct uart_port *port, int break_state) |
| 177 | { |
| 178 | unsigned long flags; |
| 179 | unsigned int h_lcr; |
| 180 | |
| 181 | spin_lock_irqsave(&port->lock, flags); |
| 182 | h_lcr = *CSR_H_UBRLCR; |
| 183 | if (break_state) |
| 184 | h_lcr |= H_UBRLCR_BREAK; |
| 185 | else |
| 186 | h_lcr &= ~H_UBRLCR_BREAK; |
| 187 | *CSR_H_UBRLCR = h_lcr; |
| 188 | spin_unlock_irqrestore(&port->lock, flags); |
| 189 | } |
| 190 | |
| 191 | static int serial21285_startup(struct uart_port *port) |
| 192 | { |
| 193 | int ret; |
| 194 | |
| 195 | tx_enabled(port) = 1; |
| 196 | rx_enabled(port) = 1; |
| 197 | |
| 198 | ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, |
| 199 | serial21285_name, port); |
| 200 | if (ret == 0) { |
| 201 | ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, |
| 202 | serial21285_name, port); |
| 203 | if (ret) |
| 204 | free_irq(IRQ_CONRX, port); |
| 205 | } |
| 206 | |
| 207 | return ret; |
| 208 | } |
| 209 | |
| 210 | static void serial21285_shutdown(struct uart_port *port) |
| 211 | { |
| 212 | free_irq(IRQ_CONTX, port); |
| 213 | free_irq(IRQ_CONRX, port); |
| 214 | } |
| 215 | |
| 216 | static void |
Alan Cox | 606d099 | 2006-12-08 02:38:45 -0800 | [diff] [blame] | 217 | serial21285_set_termios(struct uart_port *port, struct ktermios *termios, |
| 218 | struct ktermios *old) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 219 | { |
| 220 | unsigned long flags; |
| 221 | unsigned int baud, quot, h_lcr; |
| 222 | |
| 223 | /* |
| 224 | * We don't support modem control lines. |
| 225 | */ |
| 226 | termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); |
| 227 | termios->c_cflag |= CLOCAL; |
| 228 | |
| 229 | /* |
| 230 | * We don't support BREAK character recognition. |
| 231 | */ |
| 232 | termios->c_iflag &= ~(IGNBRK | BRKINT); |
| 233 | |
| 234 | /* |
| 235 | * Ask the core to calculate the divisor for us. |
| 236 | */ |
| 237 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); |
| 238 | quot = uart_get_divisor(port, baud); |
| 239 | |
| 240 | switch (termios->c_cflag & CSIZE) { |
| 241 | case CS5: |
| 242 | h_lcr = 0x00; |
| 243 | break; |
| 244 | case CS6: |
| 245 | h_lcr = 0x20; |
| 246 | break; |
| 247 | case CS7: |
| 248 | h_lcr = 0x40; |
| 249 | break; |
| 250 | default: /* CS8 */ |
| 251 | h_lcr = 0x60; |
| 252 | break; |
| 253 | } |
| 254 | |
| 255 | if (termios->c_cflag & CSTOPB) |
| 256 | h_lcr |= H_UBRLCR_STOPB; |
| 257 | if (termios->c_cflag & PARENB) { |
| 258 | h_lcr |= H_UBRLCR_PARENB; |
| 259 | if (!(termios->c_cflag & PARODD)) |
| 260 | h_lcr |= H_UBRLCR_PAREVN; |
| 261 | } |
| 262 | |
| 263 | if (port->fifosize) |
| 264 | h_lcr |= H_UBRLCR_FIFO; |
| 265 | |
| 266 | spin_lock_irqsave(&port->lock, flags); |
| 267 | |
| 268 | /* |
| 269 | * Update the per-port timeout. |
| 270 | */ |
| 271 | uart_update_timeout(port, termios->c_cflag, baud); |
| 272 | |
| 273 | /* |
| 274 | * Which character status flags are we interested in? |
| 275 | */ |
| 276 | port->read_status_mask = RXSTAT_OVERRUN; |
| 277 | if (termios->c_iflag & INPCK) |
| 278 | port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; |
| 279 | |
Alan Cox | c5f33383 | 2007-11-19 15:12:22 +0000 | [diff] [blame^] | 280 | tty_encode_baud_rate(tty, baud, baud); |
| 281 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 282 | /* |
| 283 | * Which character status flags should we ignore? |
| 284 | */ |
| 285 | port->ignore_status_mask = 0; |
| 286 | if (termios->c_iflag & IGNPAR) |
| 287 | port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; |
| 288 | if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) |
| 289 | port->ignore_status_mask |= RXSTAT_OVERRUN; |
| 290 | |
| 291 | /* |
| 292 | * Ignore all characters if CREAD is not set. |
| 293 | */ |
| 294 | if ((termios->c_cflag & CREAD) == 0) |
| 295 | port->ignore_status_mask |= RXSTAT_DUMMY_READ; |
| 296 | |
| 297 | quot -= 1; |
| 298 | |
| 299 | *CSR_UARTCON = 0; |
| 300 | *CSR_L_UBRLCR = quot & 0xff; |
| 301 | *CSR_M_UBRLCR = (quot >> 8) & 0x0f; |
| 302 | *CSR_H_UBRLCR = h_lcr; |
| 303 | *CSR_UARTCON = 1; |
| 304 | |
| 305 | spin_unlock_irqrestore(&port->lock, flags); |
| 306 | } |
| 307 | |
| 308 | static const char *serial21285_type(struct uart_port *port) |
| 309 | { |
| 310 | return port->type == PORT_21285 ? "DC21285" : NULL; |
| 311 | } |
| 312 | |
| 313 | static void serial21285_release_port(struct uart_port *port) |
| 314 | { |
| 315 | release_mem_region(port->mapbase, 32); |
| 316 | } |
| 317 | |
| 318 | static int serial21285_request_port(struct uart_port *port) |
| 319 | { |
| 320 | return request_mem_region(port->mapbase, 32, serial21285_name) |
| 321 | != NULL ? 0 : -EBUSY; |
| 322 | } |
| 323 | |
| 324 | static void serial21285_config_port(struct uart_port *port, int flags) |
| 325 | { |
| 326 | if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) |
| 327 | port->type = PORT_21285; |
| 328 | } |
| 329 | |
| 330 | /* |
| 331 | * verify the new serial_struct (for TIOCSSERIAL). |
| 332 | */ |
| 333 | static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) |
| 334 | { |
| 335 | int ret = 0; |
| 336 | if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) |
| 337 | ret = -EINVAL; |
| 338 | if (ser->irq != NO_IRQ) |
| 339 | ret = -EINVAL; |
| 340 | if (ser->baud_base != port->uartclk / 16) |
| 341 | ret = -EINVAL; |
| 342 | return ret; |
| 343 | } |
| 344 | |
| 345 | static struct uart_ops serial21285_ops = { |
| 346 | .tx_empty = serial21285_tx_empty, |
| 347 | .get_mctrl = serial21285_get_mctrl, |
| 348 | .set_mctrl = serial21285_set_mctrl, |
| 349 | .stop_tx = serial21285_stop_tx, |
| 350 | .start_tx = serial21285_start_tx, |
| 351 | .stop_rx = serial21285_stop_rx, |
| 352 | .enable_ms = serial21285_enable_ms, |
| 353 | .break_ctl = serial21285_break_ctl, |
| 354 | .startup = serial21285_startup, |
| 355 | .shutdown = serial21285_shutdown, |
| 356 | .set_termios = serial21285_set_termios, |
| 357 | .type = serial21285_type, |
| 358 | .release_port = serial21285_release_port, |
| 359 | .request_port = serial21285_request_port, |
| 360 | .config_port = serial21285_config_port, |
| 361 | .verify_port = serial21285_verify_port, |
| 362 | }; |
| 363 | |
| 364 | static struct uart_port serial21285_port = { |
| 365 | .mapbase = 0x42000160, |
Russell King | 9b4a161 | 2006-02-05 10:48:10 +0000 | [diff] [blame] | 366 | .iotype = UPIO_MEM, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 367 | .irq = NO_IRQ, |
| 368 | .fifosize = 16, |
| 369 | .ops = &serial21285_ops, |
Russell King | ce8337c | 2006-01-21 19:28:15 +0000 | [diff] [blame] | 370 | .flags = UPF_BOOT_AUTOCONF, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 371 | }; |
| 372 | |
| 373 | static void serial21285_setup_ports(void) |
| 374 | { |
| 375 | serial21285_port.uartclk = mem_fclk_21285 / 4; |
| 376 | } |
| 377 | |
| 378 | #ifdef CONFIG_SERIAL_21285_CONSOLE |
Russell King | d358788 | 2006-03-20 20:00:09 +0000 | [diff] [blame] | 379 | static void serial21285_console_putchar(struct uart_port *port, int ch) |
| 380 | { |
| 381 | while (*CSR_UARTFLG & 0x20) |
| 382 | barrier(); |
| 383 | *CSR_UARTDR = ch; |
| 384 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 385 | |
| 386 | static void |
| 387 | serial21285_console_write(struct console *co, const char *s, |
| 388 | unsigned int count) |
| 389 | { |
Russell King | d358788 | 2006-03-20 20:00:09 +0000 | [diff] [blame] | 390 | uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 391 | } |
| 392 | |
| 393 | static void __init |
| 394 | serial21285_get_options(struct uart_port *port, int *baud, |
| 395 | int *parity, int *bits) |
| 396 | { |
| 397 | if (*CSR_UARTCON == 1) { |
| 398 | unsigned int tmp; |
| 399 | |
| 400 | tmp = *CSR_H_UBRLCR; |
| 401 | switch (tmp & 0x60) { |
| 402 | case 0x00: |
| 403 | *bits = 5; |
| 404 | break; |
| 405 | case 0x20: |
| 406 | *bits = 6; |
| 407 | break; |
| 408 | case 0x40: |
| 409 | *bits = 7; |
| 410 | break; |
| 411 | default: |
| 412 | case 0x60: |
| 413 | *bits = 8; |
| 414 | break; |
| 415 | } |
| 416 | |
| 417 | if (tmp & H_UBRLCR_PARENB) { |
| 418 | *parity = 'o'; |
| 419 | if (tmp & H_UBRLCR_PAREVN) |
| 420 | *parity = 'e'; |
| 421 | } |
| 422 | |
| 423 | tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); |
| 424 | |
| 425 | *baud = port->uartclk / (16 * (tmp + 1)); |
| 426 | } |
| 427 | } |
| 428 | |
| 429 | static int __init serial21285_console_setup(struct console *co, char *options) |
| 430 | { |
| 431 | struct uart_port *port = &serial21285_port; |
| 432 | int baud = 9600; |
| 433 | int bits = 8; |
| 434 | int parity = 'n'; |
| 435 | int flow = 'n'; |
| 436 | |
| 437 | if (machine_is_personal_server()) |
| 438 | baud = 57600; |
| 439 | |
| 440 | /* |
| 441 | * Check whether an invalid uart number has been specified, and |
| 442 | * if so, search for the first available port that does have |
| 443 | * console support. |
| 444 | */ |
| 445 | if (options) |
| 446 | uart_parse_options(options, &baud, &parity, &bits, &flow); |
| 447 | else |
| 448 | serial21285_get_options(port, &baud, &parity, &bits); |
| 449 | |
| 450 | return uart_set_options(port, co, baud, parity, bits, flow); |
| 451 | } |
| 452 | |
Vincent Sanders | 2d93486 | 2005-09-14 22:36:03 +0100 | [diff] [blame] | 453 | static struct uart_driver serial21285_reg; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 454 | |
| 455 | static struct console serial21285_console = |
| 456 | { |
| 457 | .name = SERIAL_21285_NAME, |
| 458 | .write = serial21285_console_write, |
| 459 | .device = uart_console_device, |
| 460 | .setup = serial21285_console_setup, |
| 461 | .flags = CON_PRINTBUFFER, |
| 462 | .index = -1, |
| 463 | .data = &serial21285_reg, |
| 464 | }; |
| 465 | |
| 466 | static int __init rs285_console_init(void) |
| 467 | { |
| 468 | serial21285_setup_ports(); |
| 469 | register_console(&serial21285_console); |
| 470 | return 0; |
| 471 | } |
| 472 | console_initcall(rs285_console_init); |
| 473 | |
| 474 | #define SERIAL_21285_CONSOLE &serial21285_console |
| 475 | #else |
| 476 | #define SERIAL_21285_CONSOLE NULL |
| 477 | #endif |
| 478 | |
| 479 | static struct uart_driver serial21285_reg = { |
| 480 | .owner = THIS_MODULE, |
| 481 | .driver_name = "ttyFB", |
| 482 | .dev_name = "ttyFB", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 483 | .major = SERIAL_21285_MAJOR, |
| 484 | .minor = SERIAL_21285_MINOR, |
| 485 | .nr = 1, |
| 486 | .cons = SERIAL_21285_CONSOLE, |
| 487 | }; |
| 488 | |
| 489 | static int __init serial21285_init(void) |
| 490 | { |
| 491 | int ret; |
| 492 | |
| 493 | printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n"); |
| 494 | |
| 495 | serial21285_setup_ports(); |
| 496 | |
| 497 | ret = uart_register_driver(&serial21285_reg); |
| 498 | if (ret == 0) |
| 499 | uart_add_one_port(&serial21285_reg, &serial21285_port); |
| 500 | |
| 501 | return ret; |
| 502 | } |
| 503 | |
| 504 | static void __exit serial21285_exit(void) |
| 505 | { |
| 506 | uart_remove_one_port(&serial21285_reg, &serial21285_port); |
| 507 | uart_unregister_driver(&serial21285_reg); |
| 508 | } |
| 509 | |
| 510 | module_init(serial21285_init); |
| 511 | module_exit(serial21285_exit); |
| 512 | |
| 513 | MODULE_LICENSE("GPL"); |
| 514 | MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $"); |
| 515 | MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); |