Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / cd090eedd85256829f762677d0752a846c1b88b9 / . / include / asm-mips / serial.h
blob: 7b236641220381122fe44c79385c3282b57d647e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1999 by Ralf Baechle
7 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
8 */
9#ifndef _ASM_SERIAL_H
10#define _ASM_SERIAL_H
11
12#include <linux/config.h>
13
14/*
15 * This assumes you have a 1.8432 MHz clock for your UART.
16 *
17 * It'd be nice if someone built a serial card with a 24.576 MHz
18 * clock, since the 16550A is capable of handling a top speed of 1.5
19 * megabits/second; but this requires the faster clock.
20 */
21#define BASE_BAUD (1843200 / 16)
22
23/* Standard COM flags (except for COM4, because of the 8514 problem) */
24#ifdef CONFIG_SERIAL_DETECT_IRQ
25#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
26#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
27#else
28#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
29#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
30#endif
31
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]32#ifdef CONFIG_MACH_JAZZ
33#include <asm/jazz.h>
34
35#ifndef CONFIG_OLIVETTI_M700
36 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
37 exactly which ones ... XXX */
38#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */
39#else
40/* but the M700 isn't such a strange beast */
41#define JAZZ_BASE_BAUD BASE_BAUD
42#endif
43
44#define _JAZZ_SERIAL_INIT(int, base) \
45 { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
46 .iomem_base = (u8 *) base, .iomem_reg_shift = 0, \
47 .io_type = SERIAL_IO_MEM }
48#define JAZZ_SERIAL_PORT_DEFNS \
49 _JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \
50 _JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE),
51#else
52#define JAZZ_SERIAL_PORT_DEFNS
53#endif
54
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]55/*
56 * Both Galileo boards have the same UART mappings.
57 */
58#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
59#include <asm/galileo-boards/ev96100.h>
60#include <asm/galileo-boards/ev96100int.h>
61#define EV96100_SERIAL_PORT_DEFNS \
62 { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
63 .flags = STD_COM_FLAGS, \
64 .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
65 .io_type = SERIAL_IO_MEM }, \
66 { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
67 .flags = STD_COM_FLAGS, \
68 .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
69 .io_type = SERIAL_IO_MEM },
70#else
71#define EV96100_SERIAL_PORT_DEFNS
72#endif
73
74#ifdef CONFIG_MIPS_ITE8172
75#include <asm/it8172/it8172.h>
76#include <asm/it8172/it8172_int.h>
77#include <asm/it8712.h>
78#define ITE_SERIAL_PORT_DEFNS \
79 { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
80 .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
81 { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
82 .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
83 /* Smart Card Reader 0 */ \
84 { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
85 .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
86 /* Smart Card Reader 1 */ \
87 { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
88 .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
89#else
90#define ITE_SERIAL_PORT_DEFNS
91#endif
92
93#ifdef CONFIG_MIPS_IVR
94#include <asm/it8172/it8172.h>
95#include <asm/it8172/it8172_int.h>
96#define IVR_SERIAL_PORT_DEFNS \
97 { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
98 .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
99 /* Smart Card Reader 1 */ \
100 { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
101 .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
102#else
103#define IVR_SERIAL_PORT_DEFNS
104#endif
105
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]106#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
107#define STD_SERIAL_PORT_DEFNS \
108 /* UART CLK PORT IRQ FLAGS */ \
109 { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
110 { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
111 { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
112 { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
113
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]114#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
115#define STD_SERIAL_PORT_DEFNS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]116#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
117
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]118#ifdef CONFIG_MOMENCO_JAGUAR_ATX
119/* Ordinary NS16552 duart with a 20MHz crystal. */
120#define JAGUAR_ATX_UART_CLK 20000000
121#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16)
122
123#define JAGUAR_ATX_SERIAL1_IRQ 6
124#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
125
126#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
Ralf Baechle0f04afb2005-03-01 10:38:58 +0000[diff] [blame]127 { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
128 .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
129 .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]130 io_type: SERIAL_IO_MEM }
131#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
132 _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
133#else
134#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
135#endif
136
137#ifdef CONFIG_MOMENCO_OCELOT_3
138#define OCELOT_3_BASE_BAUD ( 20000000 / 16 )
139#define OCELOT_3_SERIAL_IRQ 6
140#define OCELOT_3_SERIAL_BASE (signed)0xfd000020
141
142#define _OCELOT_3_SERIAL_INIT(int, base) \
Ralf Baechle0f04afb2005-03-01 10:38:58 +0000[diff] [blame]143 { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \
144 .flags = STD_COM_FLAGS, \
145 .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]146 io_type: SERIAL_IO_MEM }
147
148#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
149 _OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE)
150#else
151#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
152#endif
153
154#ifdef CONFIG_MOMENCO_OCELOT
155/* Ordinary NS16552 duart with a 20MHz crystal. */
156#define OCELOT_BASE_BAUD ( 20000000 / 16 )
157
158#define OCELOT_SERIAL1_IRQ 4
159#define OCELOT_SERIAL1_BASE 0xe0001020
160
161#define _OCELOT_SERIAL_INIT(int, base) \
162 { .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
163 .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
164 .io_type = SERIAL_IO_MEM }
165#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
166 _OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE)
167#else
168#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
169#endif
170
171#ifdef CONFIG_MOMENCO_OCELOT_G
172/* Ordinary NS16552 duart with a 20MHz crystal. */
173#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
174
175#define OCELOT_G_SERIAL1_IRQ 4
176#if 0
177#define OCELOT_G_SERIAL1_BASE 0xe0001020
178#else
179#define OCELOT_G_SERIAL1_BASE 0xfd000020
180#endif
181
182#define _OCELOT_G_SERIAL_INIT(int, base) \
183 { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
184 .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
185 .io_type = SERIAL_IO_MEM }
186#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
187 _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
188#else
189#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
190#endif
191
192#ifdef CONFIG_MOMENCO_OCELOT_C
193/* Ordinary NS16552 duart with a 20MHz crystal. */
194#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
195
196#define OCELOT_C_SERIAL1_IRQ 80
197#define OCELOT_C_SERIAL1_BASE 0xfd000020
198
199#define OCELOT_C_SERIAL2_IRQ 81
200#define OCELOT_C_SERIAL2_BASE 0xfd000000
201
202#define _OCELOT_C_SERIAL_INIT(int, base) \
203 { .baud_base = OCELOT_C_BASE_BAUD, \
204 .irq = (int), \
205 .flags = STD_COM_FLAGS, \
206 .iomem_base = (u8 *) base, \
207 .iomem_reg_shift = 2, \
208 .io_type = SERIAL_IO_MEM \
209 }
210#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
211 _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
212 _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
213#else
214#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
215#endif
216
217#ifdef CONFIG_DDB5477
218#include <asm/ddb5xxx/ddb5477.h>
219#define DDB5477_SERIAL_PORT_DEFNS \
220 { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \
221 .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \
222 .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \
223 { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \
224 .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \
225 .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},
226#else
227#define DDB5477_SERIAL_PORT_DEFNS
228#endif
229
230#ifdef CONFIG_SGI_IP32
231/*
232 * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory
233 * They are initialized in ip32_setup
234 */
235#define IP32_SERIAL_PORT_DEFNS \
236 {},{},
237#else
238#define IP32_SERIAL_PORT_DEFNS
239#endif /* CONFIG_SGI_IP32 */
240
241#define SERIAL_PORT_DFNS \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]242 DDB5477_SERIAL_PORT_DEFNS \
243 EV96100_SERIAL_PORT_DEFNS \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]244 IP32_SERIAL_PORT_DEFNS \
245 ITE_SERIAL_PORT_DEFNS \
246 IVR_SERIAL_PORT_DEFNS \
247 JAZZ_SERIAL_PORT_DEFNS \
248 STD_SERIAL_PORT_DEFNS \
249 MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
250 MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
251 MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
Ralf Baechle335bd9d2006-03-26 21:25:57 +0100[diff] [blame]252 MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]253
254#endif /* _ASM_SERIAL_H */