blob: c4dfa42a75acc6663de5b0c4aabd7db3705de954 [file] [log] [blame]
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +00001/*
2 * Copyright (C) 2011 Dmitry Eremin-Solenikov
3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
11 * that is iMac G5 and latest single CPU desktop.
12 */
13
14#undef DEBUG
15
16#include <linux/module.h>
17#include <linux/types.h>
18#include <linux/errno.h>
19#include <linux/kernel.h>
20#include <linux/delay.h>
21#include <linux/sched.h>
22#include <linux/cpufreq.h>
23#include <linux/init.h>
24#include <linux/completion.h>
25#include <linux/mutex.h>
26#include <linux/time.h>
Sudeep KarkadaNagesha2421d4c2013-07-17 12:39:29 +010027#include <linux/of_device.h>
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +000028
29#define DBG(fmt...) pr_debug(fmt)
30
31/* see 970FX user manual */
32
33#define SCOM_PCR 0x0aa001 /* PCR scom addr */
34
35#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
36#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
37#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
38#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
39#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
40#define PCR_SPEED_SHIFT 17
41#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
42#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
43#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
44#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
45#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
46#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
47
48#define SCOM_PSR 0x408001 /* PSR scom addr */
49/* warning: PSR is a 64 bits register */
50#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
51#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
52#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
53#define PSR_CUR_SPEED_SHIFT (56)
54
55/*
56 * The G5 only supports two frequencies (Quarter speed is not supported)
57 */
58#define CPUFREQ_HIGH 0
59#define CPUFREQ_LOW 1
60
61static struct cpufreq_frequency_table maple_cpu_freqs[] = {
62 {CPUFREQ_HIGH, 0},
63 {CPUFREQ_LOW, 0},
64 {0, CPUFREQ_TABLE_END},
65};
66
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +000067/* Power mode data is an array of the 32 bits PCR values to use for
68 * the various frequencies, retrieved from the device-tree
69 */
70static int maple_pmode_cur;
71
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +000072static const u32 *maple_pmode_data;
73static int maple_pmode_max;
74
75/*
76 * SCOM based frequency switching for 970FX rev3
77 */
78static int maple_scom_switch_freq(int speed_mode)
79{
80 unsigned long flags;
81 int to;
82
83 local_irq_save(flags);
84
85 /* Clear PCR high */
86 scom970_write(SCOM_PCR, 0);
87 /* Clear PCR low */
88 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
89 /* Set PCR low */
90 scom970_write(SCOM_PCR, PCR_HILO_SELECT |
91 maple_pmode_data[speed_mode]);
92
93 /* Wait for completion */
94 for (to = 0; to < 10; to++) {
95 unsigned long psr = scom970_read(SCOM_PSR);
96
97 if ((psr & PSR_CMD_RECEIVED) == 0 &&
98 (((psr >> PSR_CUR_SPEED_SHIFT) ^
99 (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
100 == 0)
101 break;
102 if (psr & PSR_CMD_COMPLETED)
103 break;
104 udelay(100);
105 }
106
107 local_irq_restore(flags);
108
109 maple_pmode_cur = speed_mode;
110 ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
111
112 return 0;
113}
114
115static int maple_scom_query_freq(void)
116{
117 unsigned long psr = scom970_read(SCOM_PSR);
118 int i;
119
120 for (i = 0; i <= maple_pmode_max; i++)
121 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
122 (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
123 break;
124 return i;
125}
126
127/*
128 * Common interface to the cpufreq core
129 */
130
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000131static int maple_cpufreq_target(struct cpufreq_policy *policy,
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530132 unsigned int index)
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000133{
Viresh Kumard4019f02013-08-14 19:38:24 +0530134 return maple_scom_switch_freq(index);
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000135}
136
137static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
138{
139 return maple_cpu_freqs[maple_pmode_cur].frequency;
140}
141
142static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
143{
Viresh Kumar7bfd2482013-10-03 20:29:17 +0530144 return cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000145}
146
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000147static struct cpufreq_driver maple_cpufreq_driver = {
148 .name = "maple",
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000149 .flags = CPUFREQ_CONST_LOOPS,
150 .init = maple_cpufreq_cpu_init,
Viresh Kumarb766b902013-10-03 20:28:12 +0530151 .verify = cpufreq_generic_frequency_table_verify,
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530152 .target_index = maple_cpufreq_target,
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000153 .get = maple_cpufreq_get_speed,
Viresh Kumarb766b902013-10-03 20:28:12 +0530154 .attr = cpufreq_generic_attr,
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000155};
156
157static int __init maple_cpufreq_init(void)
158{
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000159 struct device_node *cpunode;
160 unsigned int psize;
161 unsigned long max_freq;
162 const u32 *valp;
163 u32 pvr_hi;
164 int rc = -ENODEV;
165
166 /*
167 * Behave here like powermac driver which checks machine compatibility
168 * to ease merging of two drivers in future.
169 */
170 if (!of_machine_is_compatible("Momentum,Maple") &&
171 !of_machine_is_compatible("Momentum,Apache"))
172 return 0;
173
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000174 /* Get first CPU node */
Sudeep KarkadaNagesha2421d4c2013-07-17 12:39:29 +0100175 cpunode = of_cpu_device_node_get(0);
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000176 if (cpunode == NULL) {
177 printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
Sudeep KarkadaNagesha2421d4c2013-07-17 12:39:29 +0100178 goto bail_noprops;
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000179 }
180
181 /* Check 970FX for now */
182 /* we actually don't care on which CPU to access PVR */
183 pvr_hi = PVR_VER(mfspr(SPRN_PVR));
184 if (pvr_hi != 0x3c && pvr_hi != 0x44) {
185 printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n",
186 pvr_hi);
187 goto bail_noprops;
188 }
189
190 /* Look for the powertune data in the device-tree */
191 /*
192 * On Maple this property is provided by PIBS in dual-processor config,
193 * not provided by PIBS in CPU0 config and also not provided by SLOF,
194 * so YMMV
195 */
196 maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
197 if (!maple_pmode_data) {
198 DBG("No power-mode-data !\n");
199 goto bail_noprops;
200 }
201 maple_pmode_max = psize / sizeof(u32) - 1;
202
203 /*
204 * From what I see, clock-frequency is always the maximal frequency.
205 * The current driver can not slew sysclk yet, so we really only deal
206 * with powertune steps for now. We also only implement full freq and
207 * half freq in this version. So far, I haven't yet seen a machine
208 * supporting anything else.
209 */
210 valp = of_get_property(cpunode, "clock-frequency", NULL);
211 if (!valp)
212 return -ENODEV;
213 max_freq = (*valp)/1000;
214 maple_cpu_freqs[0].frequency = max_freq;
215 maple_cpu_freqs[1].frequency = max_freq/2;
216
217 /* Force apply current frequency to make sure everything is in
218 * sync (voltage is right for example). Firmware may leave us with
219 * a strange setting ...
220 */
221 msleep(10);
222 maple_pmode_cur = -1;
223 maple_scom_switch_freq(maple_scom_query_freq());
224
225 printk(KERN_INFO "Registering Maple CPU frequency driver\n");
226 printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
227 maple_cpu_freqs[1].frequency/1000,
228 maple_cpu_freqs[0].frequency/1000,
229 maple_cpu_freqs[maple_pmode_cur].frequency/1000);
230
231 rc = cpufreq_register_driver(&maple_cpufreq_driver);
232
233 of_node_put(cpunode);
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000234
235 return rc;
236
237bail_noprops:
238 of_node_put(cpunode);
Dmitry Eremin-Solenikov5d8c6652011-06-29 05:07:56 +0000239
240 return rc;
241}
242
243module_init(maple_cpufreq_init);
244
245
246MODULE_LICENSE("GPL");