Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3 | * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> |
Jay Cliburn | e8f720f | 2008-05-09 22:12:09 -0500 | [diff] [blame] | 4 | * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 5 | * |
| 6 | * Derived from Intel e1000 driver |
| 7 | * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify it |
| 10 | * under the terms of the GNU General Public License as published by the Free |
| 11 | * Software Foundation; either version 2 of the License, or (at your option) |
| 12 | * any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 17 | * more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License along with |
| 20 | * this program; if not, write to the Free Software Foundation, Inc., 59 |
| 21 | * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 22 | * |
| 23 | * The full GNU General Public License is included in this distribution in the |
| 24 | * file called COPYING. |
| 25 | * |
| 26 | * Contact Information: |
Jay Cliburn | c8f2d9b | 2008-09-27 04:17:23 +0000 | [diff] [blame] | 27 | * Xiong Huang <xiong.huang@atheros.com> |
| 28 | * Jie Yang <jie.yang@atheros.com> |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 29 | * Chris Snook <csnook@redhat.com> |
| 30 | * Jay Cliburn <jcliburn@gmail.com> |
| 31 | * |
Jay Cliburn | c8f2d9b | 2008-09-27 04:17:23 +0000 | [diff] [blame] | 32 | * This version is adapted from the Attansic reference driver. |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 33 | * |
| 34 | * TODO: |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 35 | * Add more ethtool functions. |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 36 | * Fix abstruse irq enable/disable condition described here: |
| 37 | * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 |
| 38 | * |
| 39 | * NEEDS TESTING: |
| 40 | * VLAN |
| 41 | * multicast |
| 42 | * promiscuous mode |
| 43 | * interrupt coalescing |
| 44 | * SMP torture testing |
| 45 | */ |
| 46 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 47 | #include <asm/atomic.h> |
| 48 | #include <asm/byteorder.h> |
| 49 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 50 | #include <linux/compiler.h> |
| 51 | #include <linux/crc32.h> |
| 52 | #include <linux/delay.h> |
| 53 | #include <linux/dma-mapping.h> |
| 54 | #include <linux/etherdevice.h> |
| 55 | #include <linux/hardirq.h> |
| 56 | #include <linux/if_ether.h> |
| 57 | #include <linux/if_vlan.h> |
| 58 | #include <linux/in.h> |
| 59 | #include <linux/interrupt.h> |
| 60 | #include <linux/ip.h> |
| 61 | #include <linux/irqflags.h> |
| 62 | #include <linux/irqreturn.h> |
| 63 | #include <linux/jiffies.h> |
| 64 | #include <linux/mii.h> |
| 65 | #include <linux/module.h> |
| 66 | #include <linux/moduleparam.h> |
| 67 | #include <linux/net.h> |
| 68 | #include <linux/netdevice.h> |
| 69 | #include <linux/pci.h> |
| 70 | #include <linux/pci_ids.h> |
| 71 | #include <linux/pm.h> |
| 72 | #include <linux/skbuff.h> |
| 73 | #include <linux/slab.h> |
| 74 | #include <linux/spinlock.h> |
| 75 | #include <linux/string.h> |
| 76 | #include <linux/tcp.h> |
| 77 | #include <linux/timer.h> |
| 78 | #include <linux/types.h> |
| 79 | #include <linux/workqueue.h> |
| 80 | |
| 81 | #include <net/checksum.h> |
| 82 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 83 | #include "atl1.h" |
| 84 | |
Alex Chiang | 5ad1890 | 2009-05-26 20:50:12 -0700 | [diff] [blame] | 85 | #define ATLX_DRIVER_VERSION "2.1.3" |
| 86 | MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \ |
Joe Perches | 44ebb95 | 2010-03-26 16:27:55 +0000 | [diff] [blame] | 87 | Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>"); |
Alex Chiang | 5ad1890 | 2009-05-26 20:50:12 -0700 | [diff] [blame] | 88 | MODULE_LICENSE("GPL"); |
| 89 | MODULE_VERSION(ATLX_DRIVER_VERSION); |
| 90 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 91 | /* Temporary hack for merging atl1 and atl2 */ |
| 92 | #include "atlx.c" |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 93 | |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 94 | static const struct ethtool_ops atl1_ethtool_ops; |
| 95 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 96 | /* |
Chris Snook | 8ec7226 | 2008-04-18 21:51:53 -0400 | [diff] [blame] | 97 | * This is the only thing that needs to be changed to adjust the |
| 98 | * maximum number of ports that the driver can manage. |
| 99 | */ |
| 100 | #define ATL1_MAX_NIC 4 |
| 101 | |
| 102 | #define OPTION_UNSET -1 |
| 103 | #define OPTION_DISABLED 0 |
| 104 | #define OPTION_ENABLED 1 |
| 105 | |
| 106 | #define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } |
| 107 | |
| 108 | /* |
| 109 | * Interrupt Moderate Timer in units of 2 us |
| 110 | * |
| 111 | * Valid Range: 10-65535 |
| 112 | * |
| 113 | * Default Value: 100 (200us) |
| 114 | */ |
| 115 | static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; |
Hannes Eder | b79d8ff | 2009-02-14 11:15:17 +0000 | [diff] [blame] | 116 | static unsigned int num_int_mod_timer; |
Chris Snook | 8ec7226 | 2008-04-18 21:51:53 -0400 | [diff] [blame] | 117 | module_param_array_named(int_mod_timer, int_mod_timer, int, |
| 118 | &num_int_mod_timer, 0); |
| 119 | MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); |
| 120 | |
| 121 | #define DEFAULT_INT_MOD_CNT 100 /* 200us */ |
| 122 | #define MAX_INT_MOD_CNT 65000 |
| 123 | #define MIN_INT_MOD_CNT 50 |
| 124 | |
| 125 | struct atl1_option { |
| 126 | enum { enable_option, range_option, list_option } type; |
| 127 | char *name; |
| 128 | char *err; |
| 129 | int def; |
| 130 | union { |
| 131 | struct { /* range_option info */ |
| 132 | int min; |
| 133 | int max; |
| 134 | } r; |
| 135 | struct { /* list_option info */ |
| 136 | int nr; |
| 137 | struct atl1_opt_list { |
| 138 | int i; |
| 139 | char *str; |
| 140 | } *p; |
| 141 | } l; |
| 142 | } arg; |
| 143 | }; |
| 144 | |
| 145 | static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, |
| 146 | struct pci_dev *pdev) |
| 147 | { |
| 148 | if (*value == OPTION_UNSET) { |
| 149 | *value = opt->def; |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | switch (opt->type) { |
| 154 | case enable_option: |
| 155 | switch (*value) { |
| 156 | case OPTION_ENABLED: |
| 157 | dev_info(&pdev->dev, "%s enabled\n", opt->name); |
| 158 | return 0; |
| 159 | case OPTION_DISABLED: |
| 160 | dev_info(&pdev->dev, "%s disabled\n", opt->name); |
| 161 | return 0; |
| 162 | } |
| 163 | break; |
| 164 | case range_option: |
| 165 | if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { |
| 166 | dev_info(&pdev->dev, "%s set to %i\n", opt->name, |
| 167 | *value); |
| 168 | return 0; |
| 169 | } |
| 170 | break; |
| 171 | case list_option:{ |
| 172 | int i; |
| 173 | struct atl1_opt_list *ent; |
| 174 | |
| 175 | for (i = 0; i < opt->arg.l.nr; i++) { |
| 176 | ent = &opt->arg.l.p[i]; |
| 177 | if (*value == ent->i) { |
| 178 | if (ent->str[0] != '\0') |
| 179 | dev_info(&pdev->dev, "%s\n", |
| 180 | ent->str); |
| 181 | return 0; |
| 182 | } |
| 183 | } |
| 184 | } |
| 185 | break; |
| 186 | |
| 187 | default: |
| 188 | break; |
| 189 | } |
| 190 | |
| 191 | dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", |
| 192 | opt->name, *value, opt->err); |
| 193 | *value = opt->def; |
| 194 | return -1; |
| 195 | } |
| 196 | |
| 197 | /* |
| 198 | * atl1_check_options - Range Checking for Command Line Parameters |
| 199 | * @adapter: board private structure |
| 200 | * |
| 201 | * This routine checks all command line parameters for valid user |
| 202 | * input. If an invalid value is given, or if no user specified |
| 203 | * value exists, a default value is used. The final value is stored |
| 204 | * in a variable in the adapter structure. |
| 205 | */ |
Hannes Eder | 9dc20f5 | 2008-12-25 23:58:35 -0800 | [diff] [blame] | 206 | static void __devinit atl1_check_options(struct atl1_adapter *adapter) |
Chris Snook | 8ec7226 | 2008-04-18 21:51:53 -0400 | [diff] [blame] | 207 | { |
| 208 | struct pci_dev *pdev = adapter->pdev; |
| 209 | int bd = adapter->bd_number; |
| 210 | if (bd >= ATL1_MAX_NIC) { |
| 211 | dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); |
| 212 | dev_notice(&pdev->dev, "using defaults for all values\n"); |
| 213 | } |
| 214 | { /* Interrupt Moderate Timer */ |
| 215 | struct atl1_option opt = { |
| 216 | .type = range_option, |
| 217 | .name = "Interrupt Moderator Timer", |
| 218 | .err = "using default of " |
| 219 | __MODULE_STRING(DEFAULT_INT_MOD_CNT), |
| 220 | .def = DEFAULT_INT_MOD_CNT, |
| 221 | .arg = {.r = {.min = MIN_INT_MOD_CNT, |
| 222 | .max = MAX_INT_MOD_CNT} } |
| 223 | }; |
| 224 | int val; |
| 225 | if (num_int_mod_timer > bd) { |
| 226 | val = int_mod_timer[bd]; |
| 227 | atl1_validate_option(&val, &opt, pdev); |
| 228 | adapter->imt = (u16) val; |
| 229 | } else |
| 230 | adapter->imt = (u16) (opt.def); |
| 231 | } |
| 232 | } |
| 233 | |
| 234 | /* |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 235 | * atl1_pci_tbl - PCI Device ID Table |
| 236 | */ |
Alexey Dobriyan | a3aa188 | 2010-01-07 11:58:11 +0000 | [diff] [blame] | 237 | static DEFINE_PCI_DEVICE_TABLE(atl1_pci_tbl) = { |
Chris Snook | e81e557 | 2007-02-14 20:17:01 -0600 | [diff] [blame] | 238 | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 239 | /* required last entry */ |
| 240 | {0,} |
| 241 | }; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 242 | MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); |
| 243 | |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 244 | static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | |
| 245 | NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; |
| 246 | |
| 247 | static int debug = -1; |
| 248 | module_param(debug, int, 0); |
| 249 | MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); |
| 250 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 251 | /* |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 252 | * Reset the transmit and receive units; mask and clear all interrupts. |
| 253 | * hw - Struct containing variables accessed by shared code |
| 254 | * return : 0 or idle status (if error) |
| 255 | */ |
| 256 | static s32 atl1_reset_hw(struct atl1_hw *hw) |
| 257 | { |
| 258 | struct pci_dev *pdev = hw->back->pdev; |
| 259 | struct atl1_adapter *adapter = hw->back; |
| 260 | u32 icr; |
| 261 | int i; |
| 262 | |
| 263 | /* |
| 264 | * Clear Interrupt mask to stop board from generating |
| 265 | * interrupts & Clear any pending interrupt events |
| 266 | */ |
| 267 | /* |
| 268 | * iowrite32(0, hw->hw_addr + REG_IMR); |
| 269 | * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); |
| 270 | */ |
| 271 | |
| 272 | /* |
| 273 | * Issue Soft Reset to the MAC. This will reset the chip's |
| 274 | * transmit, receive, DMA. It will not effect |
| 275 | * the current PCI configuration. The global reset bit is self- |
| 276 | * clearing, and should clear within a microsecond. |
| 277 | */ |
| 278 | iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); |
| 279 | ioread32(hw->hw_addr + REG_MASTER_CTRL); |
| 280 | |
| 281 | iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); |
| 282 | ioread16(hw->hw_addr + REG_PHY_ENABLE); |
| 283 | |
| 284 | /* delay about 1ms */ |
| 285 | msleep(1); |
| 286 | |
| 287 | /* Wait at least 10ms for All module to be Idle */ |
| 288 | for (i = 0; i < 10; i++) { |
| 289 | icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); |
| 290 | if (!icr) |
| 291 | break; |
| 292 | /* delay 1 ms */ |
| 293 | msleep(1); |
| 294 | /* FIXME: still the right way to do this? */ |
| 295 | cpu_relax(); |
| 296 | } |
| 297 | |
| 298 | if (icr) { |
| 299 | if (netif_msg_hw(adapter)) |
| 300 | dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); |
| 301 | return icr; |
| 302 | } |
| 303 | |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | /* function about EEPROM |
| 308 | * |
| 309 | * check_eeprom_exist |
| 310 | * return 0 if eeprom exist |
| 311 | */ |
| 312 | static int atl1_check_eeprom_exist(struct atl1_hw *hw) |
| 313 | { |
| 314 | u32 value; |
| 315 | value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 316 | if (value & SPI_FLASH_CTRL_EN_VPD) { |
| 317 | value &= ~SPI_FLASH_CTRL_EN_VPD; |
| 318 | iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 319 | } |
| 320 | |
| 321 | value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); |
| 322 | return ((value & 0xFF00) == 0x6C00) ? 0 : 1; |
| 323 | } |
| 324 | |
| 325 | static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) |
| 326 | { |
| 327 | int i; |
| 328 | u32 control; |
| 329 | |
| 330 | if (offset & 3) |
| 331 | /* address do not align */ |
| 332 | return false; |
| 333 | |
| 334 | iowrite32(0, hw->hw_addr + REG_VPD_DATA); |
| 335 | control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; |
| 336 | iowrite32(control, hw->hw_addr + REG_VPD_CAP); |
| 337 | ioread32(hw->hw_addr + REG_VPD_CAP); |
| 338 | |
| 339 | for (i = 0; i < 10; i++) { |
| 340 | msleep(2); |
| 341 | control = ioread32(hw->hw_addr + REG_VPD_CAP); |
| 342 | if (control & VPD_CAP_VPD_FLAG) |
| 343 | break; |
| 344 | } |
| 345 | if (control & VPD_CAP_VPD_FLAG) { |
| 346 | *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); |
| 347 | return true; |
| 348 | } |
| 349 | /* timeout */ |
| 350 | return false; |
| 351 | } |
| 352 | |
| 353 | /* |
| 354 | * Reads the value from a PHY register |
| 355 | * hw - Struct containing variables accessed by shared code |
| 356 | * reg_addr - address of the PHY register to read |
| 357 | */ |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 358 | static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 359 | { |
| 360 | u32 val; |
| 361 | int i; |
| 362 | |
| 363 | val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | |
| 364 | MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << |
| 365 | MDIO_CLK_SEL_SHIFT; |
| 366 | iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); |
| 367 | ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| 368 | |
| 369 | for (i = 0; i < MDIO_WAIT_TIMES; i++) { |
| 370 | udelay(2); |
| 371 | val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| 372 | if (!(val & (MDIO_START | MDIO_BUSY))) |
| 373 | break; |
| 374 | } |
| 375 | if (!(val & (MDIO_START | MDIO_BUSY))) { |
| 376 | *phy_data = (u16) val; |
| 377 | return 0; |
| 378 | } |
| 379 | return ATLX_ERR_PHY; |
| 380 | } |
| 381 | |
| 382 | #define CUSTOM_SPI_CS_SETUP 2 |
| 383 | #define CUSTOM_SPI_CLK_HI 2 |
| 384 | #define CUSTOM_SPI_CLK_LO 2 |
| 385 | #define CUSTOM_SPI_CS_HOLD 2 |
| 386 | #define CUSTOM_SPI_CS_HI 3 |
| 387 | |
| 388 | static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) |
| 389 | { |
| 390 | int i; |
| 391 | u32 value; |
| 392 | |
| 393 | iowrite32(0, hw->hw_addr + REG_SPI_DATA); |
| 394 | iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); |
| 395 | |
| 396 | value = SPI_FLASH_CTRL_WAIT_READY | |
| 397 | (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << |
| 398 | SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & |
| 399 | SPI_FLASH_CTRL_CLK_HI_MASK) << |
| 400 | SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & |
| 401 | SPI_FLASH_CTRL_CLK_LO_MASK) << |
| 402 | SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & |
| 403 | SPI_FLASH_CTRL_CS_HOLD_MASK) << |
| 404 | SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & |
| 405 | SPI_FLASH_CTRL_CS_HI_MASK) << |
| 406 | SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << |
| 407 | SPI_FLASH_CTRL_INS_SHIFT; |
| 408 | |
| 409 | iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 410 | |
| 411 | value |= SPI_FLASH_CTRL_START; |
| 412 | iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 413 | ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 414 | |
| 415 | for (i = 0; i < 10; i++) { |
| 416 | msleep(1); |
| 417 | value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); |
| 418 | if (!(value & SPI_FLASH_CTRL_START)) |
| 419 | break; |
| 420 | } |
| 421 | |
| 422 | if (value & SPI_FLASH_CTRL_START) |
| 423 | return false; |
| 424 | |
| 425 | *buf = ioread32(hw->hw_addr + REG_SPI_DATA); |
| 426 | |
| 427 | return true; |
| 428 | } |
| 429 | |
| 430 | /* |
| 431 | * get_permanent_address |
| 432 | * return 0 if get valid mac address, |
| 433 | */ |
| 434 | static int atl1_get_permanent_address(struct atl1_hw *hw) |
| 435 | { |
| 436 | u32 addr[2]; |
| 437 | u32 i, control; |
| 438 | u16 reg; |
| 439 | u8 eth_addr[ETH_ALEN]; |
| 440 | bool key_valid; |
| 441 | |
| 442 | if (is_valid_ether_addr(hw->perm_mac_addr)) |
| 443 | return 0; |
| 444 | |
| 445 | /* init */ |
| 446 | addr[0] = addr[1] = 0; |
| 447 | |
| 448 | if (!atl1_check_eeprom_exist(hw)) { |
| 449 | reg = 0; |
| 450 | key_valid = false; |
| 451 | /* Read out all EEPROM content */ |
| 452 | i = 0; |
| 453 | while (1) { |
| 454 | if (atl1_read_eeprom(hw, i + 0x100, &control)) { |
| 455 | if (key_valid) { |
| 456 | if (reg == REG_MAC_STA_ADDR) |
| 457 | addr[0] = control; |
| 458 | else if (reg == (REG_MAC_STA_ADDR + 4)) |
| 459 | addr[1] = control; |
| 460 | key_valid = false; |
| 461 | } else if ((control & 0xff) == 0x5A) { |
| 462 | key_valid = true; |
| 463 | reg = (u16) (control >> 16); |
| 464 | } else |
| 465 | break; |
| 466 | } else |
| 467 | /* read error */ |
| 468 | break; |
| 469 | i += 4; |
| 470 | } |
| 471 | |
| 472 | *(u32 *) ð_addr[2] = swab32(addr[0]); |
| 473 | *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| 474 | if (is_valid_ether_addr(eth_addr)) { |
| 475 | memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| 476 | return 0; |
| 477 | } |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 478 | } |
| 479 | |
| 480 | /* see if SPI FLAGS exist ? */ |
| 481 | addr[0] = addr[1] = 0; |
| 482 | reg = 0; |
| 483 | key_valid = false; |
| 484 | i = 0; |
| 485 | while (1) { |
| 486 | if (atl1_spi_read(hw, i + 0x1f000, &control)) { |
| 487 | if (key_valid) { |
| 488 | if (reg == REG_MAC_STA_ADDR) |
| 489 | addr[0] = control; |
| 490 | else if (reg == (REG_MAC_STA_ADDR + 4)) |
| 491 | addr[1] = control; |
| 492 | key_valid = false; |
| 493 | } else if ((control & 0xff) == 0x5A) { |
| 494 | key_valid = true; |
| 495 | reg = (u16) (control >> 16); |
| 496 | } else |
| 497 | /* data end */ |
| 498 | break; |
| 499 | } else |
| 500 | /* read error */ |
| 501 | break; |
| 502 | i += 4; |
| 503 | } |
| 504 | |
| 505 | *(u32 *) ð_addr[2] = swab32(addr[0]); |
| 506 | *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| 507 | if (is_valid_ether_addr(eth_addr)) { |
| 508 | memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| 509 | return 0; |
| 510 | } |
| 511 | |
| 512 | /* |
| 513 | * On some motherboards, the MAC address is written by the |
| 514 | * BIOS directly to the MAC register during POST, and is |
| 515 | * not stored in eeprom. If all else thus far has failed |
| 516 | * to fetch the permanent MAC address, try reading it directly. |
| 517 | */ |
| 518 | addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); |
| 519 | addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); |
| 520 | *(u32 *) ð_addr[2] = swab32(addr[0]); |
| 521 | *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); |
| 522 | if (is_valid_ether_addr(eth_addr)) { |
| 523 | memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); |
| 524 | return 0; |
| 525 | } |
| 526 | |
| 527 | return 1; |
| 528 | } |
| 529 | |
| 530 | /* |
| 531 | * Reads the adapter's MAC address from the EEPROM |
| 532 | * hw - Struct containing variables accessed by shared code |
| 533 | */ |
Hannes Eder | 9dc20f5 | 2008-12-25 23:58:35 -0800 | [diff] [blame] | 534 | static s32 atl1_read_mac_addr(struct atl1_hw *hw) |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 535 | { |
| 536 | u16 i; |
| 537 | |
| 538 | if (atl1_get_permanent_address(hw)) |
| 539 | random_ether_addr(hw->perm_mac_addr); |
| 540 | |
| 541 | for (i = 0; i < ETH_ALEN; i++) |
| 542 | hw->mac_addr[i] = hw->perm_mac_addr[i]; |
| 543 | return 0; |
| 544 | } |
| 545 | |
| 546 | /* |
| 547 | * Hashes an address to determine its location in the multicast table |
| 548 | * hw - Struct containing variables accessed by shared code |
| 549 | * mc_addr - the multicast address to hash |
| 550 | * |
| 551 | * atl1_hash_mc_addr |
| 552 | * purpose |
| 553 | * set hash value for a multicast address |
| 554 | * hash calcu processing : |
| 555 | * 1. calcu 32bit CRC for multicast address |
| 556 | * 2. reverse crc with MSB to LSB |
| 557 | */ |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 558 | static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 559 | { |
| 560 | u32 crc32, value = 0; |
| 561 | int i; |
| 562 | |
| 563 | crc32 = ether_crc_le(6, mc_addr); |
| 564 | for (i = 0; i < 32; i++) |
| 565 | value |= (((crc32 >> i) & 1) << (31 - i)); |
| 566 | |
| 567 | return value; |
| 568 | } |
| 569 | |
| 570 | /* |
| 571 | * Sets the bit in the multicast table corresponding to the hash value. |
| 572 | * hw - Struct containing variables accessed by shared code |
| 573 | * hash_value - Multicast address hash value |
| 574 | */ |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 575 | static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 576 | { |
| 577 | u32 hash_bit, hash_reg; |
| 578 | u32 mta; |
| 579 | |
| 580 | /* |
| 581 | * The HASH Table is a register array of 2 32-bit registers. |
| 582 | * It is treated like an array of 64 bits. We want to set |
| 583 | * bit BitArray[hash_value]. So we figure out what register |
| 584 | * the bit is in, read it, OR in the new bit, then write |
| 585 | * back the new value. The register is determined by the |
| 586 | * upper 7 bits of the hash value and the bit within that |
| 587 | * register are determined by the lower 5 bits of the value. |
| 588 | */ |
| 589 | hash_reg = (hash_value >> 31) & 0x1; |
| 590 | hash_bit = (hash_value >> 26) & 0x1F; |
| 591 | mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); |
| 592 | mta |= (1 << hash_bit); |
| 593 | iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); |
| 594 | } |
| 595 | |
| 596 | /* |
| 597 | * Writes a value to a PHY register |
| 598 | * hw - Struct containing variables accessed by shared code |
| 599 | * reg_addr - address of the PHY register to write |
| 600 | * data - data to write to the PHY |
| 601 | */ |
| 602 | static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) |
| 603 | { |
| 604 | int i; |
| 605 | u32 val; |
| 606 | |
| 607 | val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | |
| 608 | (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | |
| 609 | MDIO_SUP_PREAMBLE | |
| 610 | MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; |
| 611 | iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); |
| 612 | ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| 613 | |
| 614 | for (i = 0; i < MDIO_WAIT_TIMES; i++) { |
| 615 | udelay(2); |
| 616 | val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| 617 | if (!(val & (MDIO_START | MDIO_BUSY))) |
| 618 | break; |
| 619 | } |
| 620 | |
| 621 | if (!(val & (MDIO_START | MDIO_BUSY))) |
| 622 | return 0; |
| 623 | |
| 624 | return ATLX_ERR_PHY; |
| 625 | } |
| 626 | |
| 627 | /* |
| 628 | * Make L001's PHY out of Power Saving State (bug) |
| 629 | * hw - Struct containing variables accessed by shared code |
| 630 | * when power on, L001's PHY always on Power saving State |
| 631 | * (Gigabit Link forbidden) |
| 632 | */ |
| 633 | static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) |
| 634 | { |
| 635 | s32 ret; |
| 636 | ret = atl1_write_phy_reg(hw, 29, 0x0029); |
| 637 | if (ret) |
| 638 | return ret; |
| 639 | return atl1_write_phy_reg(hw, 30, 0); |
| 640 | } |
| 641 | |
| 642 | /* |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 643 | * Resets the PHY and make all config validate |
| 644 | * hw - Struct containing variables accessed by shared code |
| 645 | * |
| 646 | * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) |
| 647 | */ |
| 648 | static s32 atl1_phy_reset(struct atl1_hw *hw) |
| 649 | { |
| 650 | struct pci_dev *pdev = hw->back->pdev; |
| 651 | struct atl1_adapter *adapter = hw->back; |
| 652 | s32 ret_val; |
| 653 | u16 phy_data; |
| 654 | |
| 655 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 656 | hw->media_type == MEDIA_TYPE_1000M_FULL) |
| 657 | phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| 658 | else { |
| 659 | switch (hw->media_type) { |
| 660 | case MEDIA_TYPE_100M_FULL: |
| 661 | phy_data = |
| 662 | MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| 663 | MII_CR_RESET; |
| 664 | break; |
| 665 | case MEDIA_TYPE_100M_HALF: |
| 666 | phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| 667 | break; |
| 668 | case MEDIA_TYPE_10M_FULL: |
| 669 | phy_data = |
| 670 | MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| 671 | break; |
| 672 | default: |
| 673 | /* MEDIA_TYPE_10M_HALF: */ |
| 674 | phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| 675 | break; |
| 676 | } |
| 677 | } |
| 678 | |
| 679 | ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| 680 | if (ret_val) { |
| 681 | u32 val; |
| 682 | int i; |
| 683 | /* pcie serdes link may be down! */ |
| 684 | if (netif_msg_hw(adapter)) |
| 685 | dev_dbg(&pdev->dev, "pcie phy link down\n"); |
| 686 | |
| 687 | for (i = 0; i < 25; i++) { |
| 688 | msleep(1); |
| 689 | val = ioread32(hw->hw_addr + REG_MDIO_CTRL); |
| 690 | if (!(val & (MDIO_START | MDIO_BUSY))) |
| 691 | break; |
| 692 | } |
| 693 | |
| 694 | if ((val & (MDIO_START | MDIO_BUSY)) != 0) { |
| 695 | if (netif_msg_hw(adapter)) |
| 696 | dev_warn(&pdev->dev, |
| 697 | "pcie link down at least 25ms\n"); |
| 698 | return ret_val; |
| 699 | } |
| 700 | } |
| 701 | return 0; |
| 702 | } |
| 703 | |
| 704 | /* |
| 705 | * Configures PHY autoneg and flow control advertisement settings |
| 706 | * hw - Struct containing variables accessed by shared code |
| 707 | */ |
| 708 | static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) |
| 709 | { |
| 710 | s32 ret_val; |
| 711 | s16 mii_autoneg_adv_reg; |
| 712 | s16 mii_1000t_ctrl_reg; |
| 713 | |
| 714 | /* Read the MII Auto-Neg Advertisement Register (Address 4). */ |
| 715 | mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; |
| 716 | |
| 717 | /* Read the MII 1000Base-T Control Register (Address 9). */ |
| 718 | mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; |
| 719 | |
| 720 | /* |
| 721 | * First we clear all the 10/100 mb speed bits in the Auto-Neg |
| 722 | * Advertisement Register (Address 4) and the 1000 mb speed bits in |
| 723 | * the 1000Base-T Control Register (Address 9). |
| 724 | */ |
| 725 | mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; |
| 726 | mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; |
| 727 | |
| 728 | /* |
| 729 | * Need to parse media_type and set up |
| 730 | * the appropriate PHY registers. |
| 731 | */ |
| 732 | switch (hw->media_type) { |
| 733 | case MEDIA_TYPE_AUTO_SENSOR: |
| 734 | mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | |
| 735 | MII_AR_10T_FD_CAPS | |
| 736 | MII_AR_100TX_HD_CAPS | |
| 737 | MII_AR_100TX_FD_CAPS); |
| 738 | mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; |
| 739 | break; |
| 740 | |
| 741 | case MEDIA_TYPE_1000M_FULL: |
| 742 | mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; |
| 743 | break; |
| 744 | |
| 745 | case MEDIA_TYPE_100M_FULL: |
| 746 | mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; |
| 747 | break; |
| 748 | |
| 749 | case MEDIA_TYPE_100M_HALF: |
| 750 | mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; |
| 751 | break; |
| 752 | |
| 753 | case MEDIA_TYPE_10M_FULL: |
| 754 | mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; |
| 755 | break; |
| 756 | |
| 757 | default: |
| 758 | mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; |
| 759 | break; |
| 760 | } |
| 761 | |
| 762 | /* flow control fixed to enable all */ |
| 763 | mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); |
| 764 | |
| 765 | hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; |
| 766 | hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; |
| 767 | |
| 768 | ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); |
| 769 | if (ret_val) |
| 770 | return ret_val; |
| 771 | |
| 772 | ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); |
| 773 | if (ret_val) |
| 774 | return ret_val; |
| 775 | |
| 776 | return 0; |
| 777 | } |
| 778 | |
| 779 | /* |
| 780 | * Configures link settings. |
| 781 | * hw - Struct containing variables accessed by shared code |
| 782 | * Assumes the hardware has previously been reset and the |
| 783 | * transmitter and receiver are not enabled. |
| 784 | */ |
| 785 | static s32 atl1_setup_link(struct atl1_hw *hw) |
| 786 | { |
| 787 | struct pci_dev *pdev = hw->back->pdev; |
| 788 | struct atl1_adapter *adapter = hw->back; |
| 789 | s32 ret_val; |
| 790 | |
| 791 | /* |
| 792 | * Options: |
| 793 | * PHY will advertise value(s) parsed from |
| 794 | * autoneg_advertised and fc |
| 795 | * no matter what autoneg is , We will not wait link result. |
| 796 | */ |
| 797 | ret_val = atl1_phy_setup_autoneg_adv(hw); |
| 798 | if (ret_val) { |
| 799 | if (netif_msg_link(adapter)) |
| 800 | dev_dbg(&pdev->dev, |
| 801 | "error setting up autonegotiation\n"); |
| 802 | return ret_val; |
| 803 | } |
| 804 | /* SW.Reset , En-Auto-Neg if needed */ |
| 805 | ret_val = atl1_phy_reset(hw); |
| 806 | if (ret_val) { |
| 807 | if (netif_msg_link(adapter)) |
| 808 | dev_dbg(&pdev->dev, "error resetting phy\n"); |
| 809 | return ret_val; |
| 810 | } |
| 811 | hw->phy_configured = true; |
| 812 | return ret_val; |
| 813 | } |
| 814 | |
| 815 | static void atl1_init_flash_opcode(struct atl1_hw *hw) |
| 816 | { |
| 817 | if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) |
| 818 | /* Atmel */ |
| 819 | hw->flash_vendor = 0; |
| 820 | |
| 821 | /* Init OP table */ |
| 822 | iowrite8(flash_table[hw->flash_vendor].cmd_program, |
| 823 | hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); |
| 824 | iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, |
| 825 | hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); |
| 826 | iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, |
| 827 | hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); |
| 828 | iowrite8(flash_table[hw->flash_vendor].cmd_rdid, |
| 829 | hw->hw_addr + REG_SPI_FLASH_OP_RDID); |
| 830 | iowrite8(flash_table[hw->flash_vendor].cmd_wren, |
| 831 | hw->hw_addr + REG_SPI_FLASH_OP_WREN); |
| 832 | iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, |
| 833 | hw->hw_addr + REG_SPI_FLASH_OP_RDSR); |
| 834 | iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, |
| 835 | hw->hw_addr + REG_SPI_FLASH_OP_WRSR); |
| 836 | iowrite8(flash_table[hw->flash_vendor].cmd_read, |
| 837 | hw->hw_addr + REG_SPI_FLASH_OP_READ); |
| 838 | } |
| 839 | |
| 840 | /* |
| 841 | * Performs basic configuration of the adapter. |
| 842 | * hw - Struct containing variables accessed by shared code |
| 843 | * Assumes that the controller has previously been reset and is in a |
| 844 | * post-reset uninitialized state. Initializes multicast table, |
| 845 | * and Calls routines to setup link |
| 846 | * Leaves the transmit and receive units disabled and uninitialized. |
| 847 | */ |
| 848 | static s32 atl1_init_hw(struct atl1_hw *hw) |
| 849 | { |
| 850 | u32 ret_val = 0; |
| 851 | |
| 852 | /* Zero out the Multicast HASH table */ |
| 853 | iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); |
| 854 | /* clear the old settings from the multicast hash table */ |
| 855 | iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); |
| 856 | |
| 857 | atl1_init_flash_opcode(hw); |
| 858 | |
| 859 | if (!hw->phy_configured) { |
| 860 | /* enable GPHY LinkChange Interrrupt */ |
| 861 | ret_val = atl1_write_phy_reg(hw, 18, 0xC00); |
| 862 | if (ret_val) |
| 863 | return ret_val; |
| 864 | /* make PHY out of power-saving state */ |
| 865 | ret_val = atl1_phy_leave_power_saving(hw); |
| 866 | if (ret_val) |
| 867 | return ret_val; |
| 868 | /* Call a subroutine to configure the link */ |
| 869 | ret_val = atl1_setup_link(hw); |
| 870 | } |
| 871 | return ret_val; |
| 872 | } |
| 873 | |
| 874 | /* |
| 875 | * Detects the current speed and duplex settings of the hardware. |
| 876 | * hw - Struct containing variables accessed by shared code |
| 877 | * speed - Speed of the connection |
| 878 | * duplex - Duplex setting of the connection |
| 879 | */ |
| 880 | static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) |
| 881 | { |
| 882 | struct pci_dev *pdev = hw->back->pdev; |
| 883 | struct atl1_adapter *adapter = hw->back; |
| 884 | s32 ret_val; |
| 885 | u16 phy_data; |
| 886 | |
| 887 | /* ; --- Read PHY Specific Status Register (17) */ |
| 888 | ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); |
| 889 | if (ret_val) |
| 890 | return ret_val; |
| 891 | |
| 892 | if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) |
| 893 | return ATLX_ERR_PHY_RES; |
| 894 | |
| 895 | switch (phy_data & MII_ATLX_PSSR_SPEED) { |
| 896 | case MII_ATLX_PSSR_1000MBS: |
| 897 | *speed = SPEED_1000; |
| 898 | break; |
| 899 | case MII_ATLX_PSSR_100MBS: |
| 900 | *speed = SPEED_100; |
| 901 | break; |
| 902 | case MII_ATLX_PSSR_10MBS: |
| 903 | *speed = SPEED_10; |
| 904 | break; |
| 905 | default: |
| 906 | if (netif_msg_hw(adapter)) |
| 907 | dev_dbg(&pdev->dev, "error getting speed\n"); |
| 908 | return ATLX_ERR_PHY_SPEED; |
| 909 | break; |
| 910 | } |
| 911 | if (phy_data & MII_ATLX_PSSR_DPLX) |
| 912 | *duplex = FULL_DUPLEX; |
| 913 | else |
| 914 | *duplex = HALF_DUPLEX; |
| 915 | |
| 916 | return 0; |
| 917 | } |
| 918 | |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 919 | static void atl1_set_mac_addr(struct atl1_hw *hw) |
Jay Cliburn | 6446a86 | 2008-02-02 19:50:12 -0600 | [diff] [blame] | 920 | { |
| 921 | u32 value; |
| 922 | /* |
| 923 | * 00-0B-6A-F6-00-DC |
| 924 | * 0: 6AF600DC 1: 000B |
| 925 | * low dword |
| 926 | */ |
| 927 | value = (((u32) hw->mac_addr[2]) << 24) | |
| 928 | (((u32) hw->mac_addr[3]) << 16) | |
| 929 | (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); |
| 930 | iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); |
| 931 | /* high dword */ |
| 932 | value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); |
| 933 | iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); |
| 934 | } |
| 935 | |
| 936 | /* |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 937 | * atl1_sw_init - Initialize general software structures (struct atl1_adapter) |
| 938 | * @adapter: board private structure to initialize |
| 939 | * |
| 940 | * atl1_sw_init initializes the Adapter private data structure. |
| 941 | * Fields are initialized based on PCI device information and |
| 942 | * OS network device settings (MTU size). |
| 943 | */ |
| 944 | static int __devinit atl1_sw_init(struct atl1_adapter *adapter) |
| 945 | { |
| 946 | struct atl1_hw *hw = &adapter->hw; |
| 947 | struct net_device *netdev = adapter->netdev; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 948 | |
Jay Cliburn | 2a49128 | 2008-01-14 19:56:41 -0600 | [diff] [blame] | 949 | hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
Jay Cliburn | a3093d9 | 2007-07-19 18:45:14 -0500 | [diff] [blame] | 950 | hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 951 | |
| 952 | adapter->wol = 0; |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 953 | device_set_wakeup_enable(&adapter->pdev->dev, false); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 954 | adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 955 | adapter->ict = 50000; /* 100ms */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 956 | adapter->link_speed = SPEED_0; /* hardware init */ |
| 957 | adapter->link_duplex = FULL_DUPLEX; |
| 958 | |
| 959 | hw->phy_configured = false; |
| 960 | hw->preamble_len = 7; |
| 961 | hw->ipgt = 0x60; |
| 962 | hw->min_ifg = 0x50; |
| 963 | hw->ipgr1 = 0x40; |
| 964 | hw->ipgr2 = 0x60; |
| 965 | hw->max_retry = 0xf; |
| 966 | hw->lcol = 0x37; |
| 967 | hw->jam_ipg = 7; |
| 968 | hw->rfd_burst = 8; |
| 969 | hw->rrd_burst = 8; |
| 970 | hw->rfd_fetch_gap = 1; |
| 971 | hw->rx_jumbo_th = adapter->rx_buffer_len / 8; |
| 972 | hw->rx_jumbo_lkah = 1; |
| 973 | hw->rrd_ret_timer = 16; |
| 974 | hw->tpd_burst = 4; |
| 975 | hw->tpd_fetch_th = 16; |
| 976 | hw->txf_burst = 0x100; |
| 977 | hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; |
| 978 | hw->tpd_fetch_gap = 1; |
| 979 | hw->rcb_value = atl1_rcb_64; |
| 980 | hw->dma_ord = atl1_dma_ord_enh; |
| 981 | hw->dmar_block = atl1_dma_req_256; |
| 982 | hw->dmaw_block = atl1_dma_req_256; |
| 983 | hw->cmb_rrd = 4; |
| 984 | hw->cmb_tpd = 4; |
| 985 | hw->cmb_rx_timer = 1; /* about 2us */ |
| 986 | hw->cmb_tx_timer = 1; /* about 2us */ |
| 987 | hw->smb_timer = 100000; /* about 200ms */ |
| 988 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 989 | spin_lock_init(&adapter->lock); |
| 990 | spin_lock_init(&adapter->mb_lock); |
| 991 | |
| 992 | return 0; |
| 993 | } |
| 994 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 995 | static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) |
| 996 | { |
| 997 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 998 | u16 result; |
| 999 | |
| 1000 | atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); |
| 1001 | |
| 1002 | return result; |
| 1003 | } |
| 1004 | |
| 1005 | static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, |
| 1006 | int val) |
| 1007 | { |
| 1008 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 1009 | |
| 1010 | atl1_write_phy_reg(&adapter->hw, reg_num, val); |
| 1011 | } |
| 1012 | |
| 1013 | /* |
| 1014 | * atl1_mii_ioctl - |
| 1015 | * @netdev: |
| 1016 | * @ifreq: |
| 1017 | * @cmd: |
| 1018 | */ |
| 1019 | static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| 1020 | { |
| 1021 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 1022 | unsigned long flags; |
| 1023 | int retval; |
| 1024 | |
| 1025 | if (!netif_running(netdev)) |
| 1026 | return -EINVAL; |
| 1027 | |
| 1028 | spin_lock_irqsave(&adapter->lock, flags); |
| 1029 | retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); |
| 1030 | spin_unlock_irqrestore(&adapter->lock, flags); |
| 1031 | |
| 1032 | return retval; |
| 1033 | } |
| 1034 | |
| 1035 | /* |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1036 | * atl1_setup_mem_resources - allocate Tx / RX descriptor resources |
| 1037 | * @adapter: board private structure |
| 1038 | * |
| 1039 | * Return 0 on success, negative on failure |
| 1040 | */ |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 1041 | static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1042 | { |
| 1043 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 1044 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1045 | struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| 1046 | struct atl1_ring_header *ring_header = &adapter->ring_header; |
| 1047 | struct pci_dev *pdev = adapter->pdev; |
| 1048 | int size; |
| 1049 | u8 offset = 0; |
| 1050 | |
| 1051 | size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); |
| 1052 | tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); |
| 1053 | if (unlikely(!tpd_ring->buffer_info)) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1054 | if (netif_msg_drv(adapter)) |
| 1055 | dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", |
| 1056 | size); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1057 | goto err_nomem; |
| 1058 | } |
| 1059 | rfd_ring->buffer_info = |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1060 | (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1061 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1062 | /* |
| 1063 | * real ring DMA buffer |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1064 | * each ring/block may need up to 8 bytes for alignment, hence the |
| 1065 | * additional 40 bytes tacked onto the end. |
| 1066 | */ |
| 1067 | ring_header->size = size = |
| 1068 | sizeof(struct tx_packet_desc) * tpd_ring->count |
| 1069 | + sizeof(struct rx_free_desc) * rfd_ring->count |
| 1070 | + sizeof(struct rx_return_desc) * rrd_ring->count |
| 1071 | + sizeof(struct coals_msg_block) |
| 1072 | + sizeof(struct stats_msg_block) |
| 1073 | + 40; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1074 | |
| 1075 | ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1076 | &ring_header->dma); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1077 | if (unlikely(!ring_header->desc)) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1078 | if (netif_msg_drv(adapter)) |
| 1079 | dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1080 | goto err_nomem; |
| 1081 | } |
| 1082 | |
| 1083 | memset(ring_header->desc, 0, ring_header->size); |
| 1084 | |
| 1085 | /* init TPD ring */ |
| 1086 | tpd_ring->dma = ring_header->dma; |
| 1087 | offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; |
| 1088 | tpd_ring->dma += offset; |
| 1089 | tpd_ring->desc = (u8 *) ring_header->desc + offset; |
| 1090 | tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1091 | |
| 1092 | /* init RFD ring */ |
| 1093 | rfd_ring->dma = tpd_ring->dma + tpd_ring->size; |
| 1094 | offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; |
| 1095 | rfd_ring->dma += offset; |
| 1096 | rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); |
| 1097 | rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; |
Jay Cliburn | 2ca13da | 2007-07-15 11:03:28 -0500 | [diff] [blame] | 1098 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1099 | |
| 1100 | /* init RRD ring */ |
| 1101 | rrd_ring->dma = rfd_ring->dma + rfd_ring->size; |
| 1102 | offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; |
| 1103 | rrd_ring->dma += offset; |
| 1104 | rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); |
| 1105 | rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; |
Jay Cliburn | 2ca13da | 2007-07-15 11:03:28 -0500 | [diff] [blame] | 1106 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1107 | |
| 1108 | /* init CMB */ |
| 1109 | adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; |
| 1110 | offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; |
| 1111 | adapter->cmb.dma += offset; |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1112 | adapter->cmb.cmb = (struct coals_msg_block *) |
| 1113 | ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1114 | |
| 1115 | /* init SMB */ |
| 1116 | adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); |
| 1117 | offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; |
| 1118 | adapter->smb.dma += offset; |
| 1119 | adapter->smb.smb = (struct stats_msg_block *) |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1120 | ((u8 *) adapter->cmb.cmb + |
| 1121 | (sizeof(struct coals_msg_block) + offset)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1122 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1123 | return 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1124 | |
| 1125 | err_nomem: |
| 1126 | kfree(tpd_ring->buffer_info); |
| 1127 | return -ENOMEM; |
| 1128 | } |
| 1129 | |
Chris Snook | 3d2557f | 2007-07-23 16:38:39 -0400 | [diff] [blame] | 1130 | static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) |
Jay Cliburn | 2ca13da | 2007-07-15 11:03:28 -0500 | [diff] [blame] | 1131 | { |
| 1132 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 1133 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1134 | struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| 1135 | |
| 1136 | atomic_set(&tpd_ring->next_to_use, 0); |
| 1137 | atomic_set(&tpd_ring->next_to_clean, 0); |
| 1138 | |
| 1139 | rfd_ring->next_to_clean = 0; |
| 1140 | atomic_set(&rfd_ring->next_to_use, 0); |
| 1141 | |
| 1142 | rrd_ring->next_to_use = 0; |
| 1143 | atomic_set(&rrd_ring->next_to_clean, 0); |
| 1144 | } |
| 1145 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1146 | /* |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1147 | * atl1_clean_rx_ring - Free RFD Buffers |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1148 | * @adapter: board private structure |
| 1149 | */ |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1150 | static void atl1_clean_rx_ring(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1151 | { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1152 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1153 | struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| 1154 | struct atl1_buffer *buffer_info; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1155 | struct pci_dev *pdev = adapter->pdev; |
| 1156 | unsigned long size; |
| 1157 | unsigned int i; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1158 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1159 | /* Free all the Rx ring sk_buffs */ |
| 1160 | for (i = 0; i < rfd_ring->count; i++) { |
| 1161 | buffer_info = &rfd_ring->buffer_info[i]; |
| 1162 | if (buffer_info->dma) { |
| 1163 | pci_unmap_page(pdev, buffer_info->dma, |
| 1164 | buffer_info->length, PCI_DMA_FROMDEVICE); |
| 1165 | buffer_info->dma = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1166 | } |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1167 | if (buffer_info->skb) { |
| 1168 | dev_kfree_skb(buffer_info->skb); |
| 1169 | buffer_info->skb = NULL; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1170 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1171 | } |
| 1172 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1173 | size = sizeof(struct atl1_buffer) * rfd_ring->count; |
| 1174 | memset(rfd_ring->buffer_info, 0, size); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1175 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1176 | /* Zero out the descriptor ring */ |
| 1177 | memset(rfd_ring->desc, 0, rfd_ring->size); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1178 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1179 | rfd_ring->next_to_clean = 0; |
| 1180 | atomic_set(&rfd_ring->next_to_use, 0); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1181 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1182 | rrd_ring->next_to_use = 0; |
| 1183 | atomic_set(&rrd_ring->next_to_clean, 0); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1184 | } |
| 1185 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1186 | /* |
| 1187 | * atl1_clean_tx_ring - Free Tx Buffers |
| 1188 | * @adapter: board private structure |
| 1189 | */ |
| 1190 | static void atl1_clean_tx_ring(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1191 | { |
| 1192 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 1193 | struct atl1_buffer *buffer_info; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1194 | struct pci_dev *pdev = adapter->pdev; |
| 1195 | unsigned long size; |
| 1196 | unsigned int i; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1197 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1198 | /* Free all the Tx ring sk_buffs */ |
| 1199 | for (i = 0; i < tpd_ring->count; i++) { |
| 1200 | buffer_info = &tpd_ring->buffer_info[i]; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1201 | if (buffer_info->dma) { |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1202 | pci_unmap_page(pdev, buffer_info->dma, |
| 1203 | buffer_info->length, PCI_DMA_TODEVICE); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1204 | buffer_info->dma = 0; |
| 1205 | } |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1206 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1207 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1208 | for (i = 0; i < tpd_ring->count; i++) { |
| 1209 | buffer_info = &tpd_ring->buffer_info[i]; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1210 | if (buffer_info->skb) { |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1211 | dev_kfree_skb_any(buffer_info->skb); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1212 | buffer_info->skb = NULL; |
| 1213 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1214 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1215 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1216 | size = sizeof(struct atl1_buffer) * tpd_ring->count; |
| 1217 | memset(tpd_ring->buffer_info, 0, size); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1218 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1219 | /* Zero out the descriptor ring */ |
| 1220 | memset(tpd_ring->desc, 0, tpd_ring->size); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1221 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1222 | atomic_set(&tpd_ring->next_to_use, 0); |
| 1223 | atomic_set(&tpd_ring->next_to_clean, 0); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1224 | } |
| 1225 | |
| 1226 | /* |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1227 | * atl1_free_ring_resources - Free Tx / RX descriptor Resources |
| 1228 | * @adapter: board private structure |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1229 | * |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1230 | * Free all transmit software resources |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1231 | */ |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 1232 | static void atl1_free_ring_resources(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1233 | { |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1234 | struct pci_dev *pdev = adapter->pdev; |
| 1235 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 1236 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1237 | struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| 1238 | struct atl1_ring_header *ring_header = &adapter->ring_header; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1239 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1240 | atl1_clean_tx_ring(adapter); |
| 1241 | atl1_clean_rx_ring(adapter); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1242 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1243 | kfree(tpd_ring->buffer_info); |
| 1244 | pci_free_consistent(pdev, ring_header->size, ring_header->desc, |
| 1245 | ring_header->dma); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1246 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1247 | tpd_ring->buffer_info = NULL; |
| 1248 | tpd_ring->desc = NULL; |
| 1249 | tpd_ring->dma = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1250 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1251 | rfd_ring->buffer_info = NULL; |
| 1252 | rfd_ring->desc = NULL; |
| 1253 | rfd_ring->dma = 0; |
| 1254 | |
| 1255 | rrd_ring->desc = NULL; |
| 1256 | rrd_ring->dma = 0; |
Luca Tettamanti | 3f5a2a7 | 2010-09-22 10:42:31 +0000 | [diff] [blame] | 1257 | |
| 1258 | adapter->cmb.dma = 0; |
| 1259 | adapter->cmb.cmb = NULL; |
| 1260 | |
| 1261 | adapter->smb.dma = 0; |
| 1262 | adapter->smb.smb = NULL; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1263 | } |
| 1264 | |
| 1265 | static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) |
| 1266 | { |
| 1267 | u32 value; |
| 1268 | struct atl1_hw *hw = &adapter->hw; |
| 1269 | struct net_device *netdev = adapter->netdev; |
| 1270 | /* Config MAC CTRL Register */ |
| 1271 | value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; |
| 1272 | /* duplex */ |
| 1273 | if (FULL_DUPLEX == adapter->link_duplex) |
| 1274 | value |= MAC_CTRL_DUPLX; |
| 1275 | /* speed */ |
| 1276 | value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? |
| 1277 | MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << |
| 1278 | MAC_CTRL_SPEED_SHIFT); |
| 1279 | /* flow control */ |
| 1280 | value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); |
| 1281 | /* PAD & CRC */ |
| 1282 | value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); |
| 1283 | /* preamble length */ |
| 1284 | value |= (((u32) adapter->hw.preamble_len |
| 1285 | & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| 1286 | /* vlan */ |
| 1287 | if (adapter->vlgrp) |
| 1288 | value |= MAC_CTRL_RMV_VLAN; |
| 1289 | /* rx checksum |
| 1290 | if (adapter->rx_csum) |
| 1291 | value |= MAC_CTRL_RX_CHKSUM_EN; |
| 1292 | */ |
| 1293 | /* filter mode */ |
| 1294 | value |= MAC_CTRL_BC_EN; |
| 1295 | if (netdev->flags & IFF_PROMISC) |
| 1296 | value |= MAC_CTRL_PROMIS_EN; |
| 1297 | else if (netdev->flags & IFF_ALLMULTI) |
| 1298 | value |= MAC_CTRL_MC_ALL_EN; |
| 1299 | /* value |= MAC_CTRL_LOOPBACK; */ |
| 1300 | iowrite32(value, hw->hw_addr + REG_MAC_CTRL); |
| 1301 | } |
| 1302 | |
| 1303 | static u32 atl1_check_link(struct atl1_adapter *adapter) |
| 1304 | { |
| 1305 | struct atl1_hw *hw = &adapter->hw; |
| 1306 | struct net_device *netdev = adapter->netdev; |
| 1307 | u32 ret_val; |
| 1308 | u16 speed, duplex, phy_data; |
| 1309 | int reconfig = 0; |
| 1310 | |
| 1311 | /* MII_BMSR must read twice */ |
| 1312 | atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
| 1313 | atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1314 | if (!(phy_data & BMSR_LSTATUS)) { |
| 1315 | /* link down */ |
| 1316 | if (netif_carrier_ok(netdev)) { |
| 1317 | /* old link state: Up */ |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1318 | if (netif_msg_link(adapter)) |
| 1319 | dev_info(&adapter->pdev->dev, "link is down\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1320 | adapter->link_speed = SPEED_0; |
| 1321 | netif_carrier_off(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1322 | } |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1323 | return 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1324 | } |
| 1325 | |
| 1326 | /* Link Up */ |
| 1327 | ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); |
| 1328 | if (ret_val) |
| 1329 | return ret_val; |
| 1330 | |
| 1331 | switch (hw->media_type) { |
| 1332 | case MEDIA_TYPE_1000M_FULL: |
| 1333 | if (speed != SPEED_1000 || duplex != FULL_DUPLEX) |
| 1334 | reconfig = 1; |
| 1335 | break; |
| 1336 | case MEDIA_TYPE_100M_FULL: |
| 1337 | if (speed != SPEED_100 || duplex != FULL_DUPLEX) |
| 1338 | reconfig = 1; |
| 1339 | break; |
| 1340 | case MEDIA_TYPE_100M_HALF: |
| 1341 | if (speed != SPEED_100 || duplex != HALF_DUPLEX) |
| 1342 | reconfig = 1; |
| 1343 | break; |
| 1344 | case MEDIA_TYPE_10M_FULL: |
| 1345 | if (speed != SPEED_10 || duplex != FULL_DUPLEX) |
| 1346 | reconfig = 1; |
| 1347 | break; |
| 1348 | case MEDIA_TYPE_10M_HALF: |
| 1349 | if (speed != SPEED_10 || duplex != HALF_DUPLEX) |
| 1350 | reconfig = 1; |
| 1351 | break; |
| 1352 | } |
| 1353 | |
| 1354 | /* link result is our setting */ |
| 1355 | if (!reconfig) { |
Joe Perches | 8e95a20 | 2009-12-03 07:58:21 +0000 | [diff] [blame] | 1356 | if (adapter->link_speed != speed || |
| 1357 | adapter->link_duplex != duplex) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1358 | adapter->link_speed = speed; |
| 1359 | adapter->link_duplex = duplex; |
| 1360 | atl1_setup_mac_ctrl(adapter); |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1361 | if (netif_msg_link(adapter)) |
| 1362 | dev_info(&adapter->pdev->dev, |
| 1363 | "%s link is up %d Mbps %s\n", |
| 1364 | netdev->name, adapter->link_speed, |
| 1365 | adapter->link_duplex == FULL_DUPLEX ? |
| 1366 | "full duplex" : "half duplex"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1367 | } |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1368 | if (!netif_carrier_ok(netdev)) { |
| 1369 | /* Link down -> Up */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1370 | netif_carrier_on(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1371 | } |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1372 | return 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1373 | } |
| 1374 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1375 | /* change original link status */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1376 | if (netif_carrier_ok(netdev)) { |
| 1377 | adapter->link_speed = SPEED_0; |
| 1378 | netif_carrier_off(netdev); |
| 1379 | netif_stop_queue(netdev); |
| 1380 | } |
| 1381 | |
| 1382 | if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && |
| 1383 | hw->media_type != MEDIA_TYPE_1000M_FULL) { |
| 1384 | switch (hw->media_type) { |
| 1385 | case MEDIA_TYPE_100M_FULL: |
| 1386 | phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| 1387 | MII_CR_RESET; |
| 1388 | break; |
| 1389 | case MEDIA_TYPE_100M_HALF: |
| 1390 | phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| 1391 | break; |
| 1392 | case MEDIA_TYPE_10M_FULL: |
| 1393 | phy_data = |
| 1394 | MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| 1395 | break; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1396 | default: |
| 1397 | /* MEDIA_TYPE_10M_HALF: */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1398 | phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| 1399 | break; |
| 1400 | } |
| 1401 | atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1402 | return 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1403 | } |
| 1404 | |
| 1405 | /* auto-neg, insert timer to re-config phy */ |
| 1406 | if (!adapter->phy_timer_pending) { |
| 1407 | adapter->phy_timer_pending = true; |
Stephen Hemminger | e053b62 | 2008-10-31 16:52:04 -0700 | [diff] [blame] | 1408 | mod_timer(&adapter->phy_config_timer, |
| 1409 | round_jiffies(jiffies + 3 * HZ)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1410 | } |
| 1411 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1412 | return 0; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1413 | } |
| 1414 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1415 | static void set_flow_ctrl_old(struct atl1_adapter *adapter) |
| 1416 | { |
| 1417 | u32 hi, lo, value; |
| 1418 | |
| 1419 | /* RFD Flow Control */ |
| 1420 | value = adapter->rfd_ring.count; |
| 1421 | hi = value / 16; |
| 1422 | if (hi < 2) |
| 1423 | hi = 2; |
| 1424 | lo = value * 7 / 8; |
| 1425 | |
| 1426 | value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1427 | ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1428 | iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| 1429 | |
| 1430 | /* RRD Flow Control */ |
| 1431 | value = adapter->rrd_ring.count; |
| 1432 | lo = value / 16; |
| 1433 | hi = value * 7 / 8; |
| 1434 | if (lo < 2) |
| 1435 | lo = 2; |
| 1436 | value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1437 | ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1438 | iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| 1439 | } |
| 1440 | |
| 1441 | static void set_flow_ctrl_new(struct atl1_hw *hw) |
| 1442 | { |
| 1443 | u32 hi, lo, value; |
| 1444 | |
| 1445 | /* RXF Flow Control */ |
| 1446 | value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); |
| 1447 | lo = value / 16; |
| 1448 | if (lo < 192) |
| 1449 | lo = 192; |
| 1450 | hi = value * 7 / 8; |
| 1451 | if (hi < lo) |
| 1452 | hi = lo + 16; |
| 1453 | value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1454 | ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1455 | iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| 1456 | |
| 1457 | /* RRD Flow Control */ |
| 1458 | value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); |
| 1459 | lo = value / 8; |
| 1460 | hi = value * 7 / 8; |
| 1461 | if (lo < 2) |
| 1462 | lo = 2; |
| 1463 | if (hi < lo) |
| 1464 | hi = lo + 3; |
| 1465 | value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1466 | ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1467 | iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| 1468 | } |
| 1469 | |
| 1470 | /* |
| 1471 | * atl1_configure - Configure Transmit&Receive Unit after Reset |
| 1472 | * @adapter: board private structure |
| 1473 | * |
| 1474 | * Configure the Tx /Rx unit of the MAC after a reset. |
| 1475 | */ |
| 1476 | static u32 atl1_configure(struct atl1_adapter *adapter) |
| 1477 | { |
| 1478 | struct atl1_hw *hw = &adapter->hw; |
| 1479 | u32 value; |
| 1480 | |
| 1481 | /* clear interrupt status */ |
| 1482 | iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); |
| 1483 | |
| 1484 | /* set MAC Address */ |
| 1485 | value = (((u32) hw->mac_addr[2]) << 24) | |
| 1486 | (((u32) hw->mac_addr[3]) << 16) | |
| 1487 | (((u32) hw->mac_addr[4]) << 8) | |
| 1488 | (((u32) hw->mac_addr[5])); |
| 1489 | iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); |
| 1490 | value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); |
| 1491 | iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); |
| 1492 | |
| 1493 | /* tx / rx ring */ |
| 1494 | |
| 1495 | /* HI base address */ |
| 1496 | iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), |
| 1497 | hw->hw_addr + REG_DESC_BASE_ADDR_HI); |
| 1498 | /* LO base address */ |
| 1499 | iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), |
| 1500 | hw->hw_addr + REG_DESC_RFD_ADDR_LO); |
| 1501 | iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), |
| 1502 | hw->hw_addr + REG_DESC_RRD_ADDR_LO); |
| 1503 | iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), |
| 1504 | hw->hw_addr + REG_DESC_TPD_ADDR_LO); |
| 1505 | iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), |
| 1506 | hw->hw_addr + REG_DESC_CMB_ADDR_LO); |
| 1507 | iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), |
| 1508 | hw->hw_addr + REG_DESC_SMB_ADDR_LO); |
| 1509 | |
| 1510 | /* element count */ |
| 1511 | value = adapter->rrd_ring.count; |
| 1512 | value <<= 16; |
| 1513 | value += adapter->rfd_ring.count; |
| 1514 | iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); |
Jay Cliburn | 2ca13da | 2007-07-15 11:03:28 -0500 | [diff] [blame] | 1515 | iowrite32(adapter->tpd_ring.count, hw->hw_addr + |
| 1516 | REG_DESC_TPD_RING_SIZE); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1517 | |
| 1518 | /* Load Ptr */ |
| 1519 | iowrite32(1, hw->hw_addr + REG_LOAD_PTR); |
| 1520 | |
| 1521 | /* config Mailbox */ |
| 1522 | value = ((atomic_read(&adapter->tpd_ring.next_to_use) |
| 1523 | & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1524 | ((atomic_read(&adapter->rrd_ring.next_to_clean) |
| 1525 | & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | |
| 1526 | ((atomic_read(&adapter->rfd_ring.next_to_use) |
| 1527 | & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1528 | iowrite32(value, hw->hw_addr + REG_MAILBOX); |
| 1529 | |
| 1530 | /* config IPG/IFG */ |
| 1531 | value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) |
| 1532 | << MAC_IPG_IFG_IPGT_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1533 | (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) |
| 1534 | << MAC_IPG_IFG_MIFG_SHIFT) | |
| 1535 | (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) |
| 1536 | << MAC_IPG_IFG_IPGR1_SHIFT) | |
| 1537 | (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) |
| 1538 | << MAC_IPG_IFG_IPGR2_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1539 | iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); |
| 1540 | |
| 1541 | /* config Half-Duplex Control */ |
| 1542 | value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1543 | (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) |
| 1544 | << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | |
| 1545 | MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | |
| 1546 | (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | |
| 1547 | (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) |
| 1548 | << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1549 | iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); |
| 1550 | |
| 1551 | /* set Interrupt Moderator Timer */ |
| 1552 | iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); |
| 1553 | iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); |
| 1554 | |
| 1555 | /* set Interrupt Clear Timer */ |
| 1556 | iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); |
| 1557 | |
Jay Cliburn | 2a49128 | 2008-01-14 19:56:41 -0600 | [diff] [blame] | 1558 | /* set max frame size hw will accept */ |
| 1559 | iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1560 | |
| 1561 | /* jumbo size & rrd retirement timer */ |
| 1562 | value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) |
| 1563 | << RXQ_JMBOSZ_TH_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1564 | (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) |
| 1565 | << RXQ_JMBO_LKAH_SHIFT) | |
| 1566 | (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) |
| 1567 | << RXQ_RRD_TIMER_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1568 | iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); |
| 1569 | |
| 1570 | /* Flow Control */ |
| 1571 | switch (hw->dev_rev) { |
| 1572 | case 0x8001: |
| 1573 | case 0x9001: |
| 1574 | case 0x9002: |
| 1575 | case 0x9003: |
| 1576 | set_flow_ctrl_old(adapter); |
| 1577 | break; |
| 1578 | default: |
| 1579 | set_flow_ctrl_new(hw); |
| 1580 | break; |
| 1581 | } |
| 1582 | |
| 1583 | /* config TXQ */ |
| 1584 | value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) |
| 1585 | << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1586 | (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) |
| 1587 | << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | |
| 1588 | (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) |
| 1589 | << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | |
| 1590 | TXQ_CTRL_EN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1591 | iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); |
| 1592 | |
| 1593 | /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ |
| 1594 | value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1595 | << TX_JUMBO_TASK_TH_SHIFT) | |
| 1596 | (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) |
| 1597 | << TX_TPD_MIN_IPG_SHIFT); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1598 | iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); |
| 1599 | |
| 1600 | /* config RXQ */ |
| 1601 | value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1602 | << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | |
| 1603 | (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) |
| 1604 | << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | |
| 1605 | (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) |
| 1606 | << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | |
| 1607 | RXQ_CTRL_EN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1608 | iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); |
| 1609 | |
| 1610 | /* config DMA Engine */ |
| 1611 | value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1612 | << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | |
Jay Cliburn | 3f516c0 | 2007-07-19 18:45:11 -0500 | [diff] [blame] | 1613 | ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) |
| 1614 | << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 1615 | DMA_CTRL_DMAW_EN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1616 | value |= (u32) hw->dma_ord; |
| 1617 | if (atl1_rcb_128 == hw->rcb_value) |
| 1618 | value |= DMA_CTRL_RCB_VALUE; |
| 1619 | iowrite32(value, hw->hw_addr + REG_DMA_CTRL); |
| 1620 | |
| 1621 | /* config CMB / SMB */ |
Jay Cliburn | 91a500a | 2007-07-19 18:45:12 -0500 | [diff] [blame] | 1622 | value = (hw->cmb_tpd > adapter->tpd_ring.count) ? |
| 1623 | hw->cmb_tpd : adapter->tpd_ring.count; |
| 1624 | value <<= 16; |
| 1625 | value |= hw->cmb_rrd; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1626 | iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); |
| 1627 | value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); |
| 1628 | iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); |
| 1629 | iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); |
| 1630 | |
| 1631 | /* --- enable CMB / SMB */ |
| 1632 | value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; |
| 1633 | iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); |
| 1634 | |
| 1635 | value = ioread32(adapter->hw.hw_addr + REG_ISR); |
| 1636 | if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) |
| 1637 | value = 1; /* config failed */ |
| 1638 | else |
| 1639 | value = 0; |
| 1640 | |
| 1641 | /* clear all interrupt status */ |
| 1642 | iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); |
| 1643 | iowrite32(0, adapter->hw.hw_addr + REG_ISR); |
| 1644 | return value; |
| 1645 | } |
| 1646 | |
| 1647 | /* |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1648 | * atl1_pcie_patch - Patch for PCIE module |
| 1649 | */ |
| 1650 | static void atl1_pcie_patch(struct atl1_adapter *adapter) |
| 1651 | { |
| 1652 | u32 value; |
| 1653 | |
| 1654 | /* much vendor magic here */ |
| 1655 | value = 0x6500; |
| 1656 | iowrite32(value, adapter->hw.hw_addr + 0x12FC); |
| 1657 | /* pcie flow control mode change */ |
| 1658 | value = ioread32(adapter->hw.hw_addr + 0x1008); |
| 1659 | value |= 0x8000; |
| 1660 | iowrite32(value, adapter->hw.hw_addr + 0x1008); |
| 1661 | } |
| 1662 | |
| 1663 | /* |
| 1664 | * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 |
| 1665 | * on PCI Command register is disable. |
| 1666 | * The function enable this bit. |
| 1667 | * Brackett, 2006/03/15 |
| 1668 | */ |
| 1669 | static void atl1_via_workaround(struct atl1_adapter *adapter) |
| 1670 | { |
| 1671 | unsigned long value; |
| 1672 | |
| 1673 | value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); |
| 1674 | if (value & PCI_COMMAND_INTX_DISABLE) |
| 1675 | value &= ~PCI_COMMAND_INTX_DISABLE; |
| 1676 | iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); |
| 1677 | } |
| 1678 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1679 | static void atl1_inc_smb(struct atl1_adapter *adapter) |
| 1680 | { |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1681 | struct net_device *netdev = adapter->netdev; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1682 | struct stats_msg_block *smb = adapter->smb.smb; |
| 1683 | |
| 1684 | /* Fill out the OS statistics structure */ |
| 1685 | adapter->soft_stats.rx_packets += smb->rx_ok; |
| 1686 | adapter->soft_stats.tx_packets += smb->tx_ok; |
| 1687 | adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; |
| 1688 | adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; |
| 1689 | adapter->soft_stats.multicast += smb->rx_mcast; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1690 | adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + |
| 1691 | smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1692 | |
| 1693 | /* Rx Errors */ |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1694 | adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + |
| 1695 | smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + |
| 1696 | smb->rx_rrd_ov + smb->rx_align_err); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1697 | adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; |
| 1698 | adapter->soft_stats.rx_length_errors += smb->rx_len_err; |
| 1699 | adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; |
| 1700 | adapter->soft_stats.rx_frame_errors += smb->rx_align_err; |
| 1701 | adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1702 | smb->rx_rxf_ov); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1703 | |
| 1704 | adapter->soft_stats.rx_pause += smb->rx_pause; |
| 1705 | adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; |
| 1706 | adapter->soft_stats.rx_trunc += smb->rx_sz_ov; |
| 1707 | |
| 1708 | /* Tx Errors */ |
| 1709 | adapter->soft_stats.tx_errors += (smb->tx_late_col + |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1710 | smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1711 | adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; |
| 1712 | adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; |
| 1713 | adapter->soft_stats.tx_window_errors += smb->tx_late_col; |
| 1714 | |
| 1715 | adapter->soft_stats.excecol += smb->tx_abort_col; |
| 1716 | adapter->soft_stats.deffer += smb->tx_defer; |
| 1717 | adapter->soft_stats.scc += smb->tx_1_col; |
| 1718 | adapter->soft_stats.mcc += smb->tx_2_col; |
| 1719 | adapter->soft_stats.latecol += smb->tx_late_col; |
| 1720 | adapter->soft_stats.tx_underun += smb->tx_underrun; |
| 1721 | adapter->soft_stats.tx_trunc += smb->tx_trunc; |
| 1722 | adapter->soft_stats.tx_pause += smb->tx_pause; |
| 1723 | |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1724 | netdev->stats.rx_packets = adapter->soft_stats.rx_packets; |
| 1725 | netdev->stats.tx_packets = adapter->soft_stats.tx_packets; |
| 1726 | netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes; |
| 1727 | netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes; |
| 1728 | netdev->stats.multicast = adapter->soft_stats.multicast; |
| 1729 | netdev->stats.collisions = adapter->soft_stats.collisions; |
| 1730 | netdev->stats.rx_errors = adapter->soft_stats.rx_errors; |
| 1731 | netdev->stats.rx_over_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1732 | adapter->soft_stats.rx_missed_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1733 | netdev->stats.rx_length_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1734 | adapter->soft_stats.rx_length_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1735 | netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; |
| 1736 | netdev->stats.rx_frame_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1737 | adapter->soft_stats.rx_frame_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1738 | netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; |
| 1739 | netdev->stats.rx_missed_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1740 | adapter->soft_stats.rx_missed_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1741 | netdev->stats.tx_errors = adapter->soft_stats.tx_errors; |
| 1742 | netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; |
| 1743 | netdev->stats.tx_aborted_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1744 | adapter->soft_stats.tx_aborted_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1745 | netdev->stats.tx_window_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1746 | adapter->soft_stats.tx_window_errors; |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1747 | netdev->stats.tx_carrier_errors = |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1748 | adapter->soft_stats.tx_carrier_errors; |
| 1749 | } |
| 1750 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1751 | static void atl1_update_mailbox(struct atl1_adapter *adapter) |
| 1752 | { |
| 1753 | unsigned long flags; |
| 1754 | u32 tpd_next_to_use; |
| 1755 | u32 rfd_next_to_use; |
| 1756 | u32 rrd_next_to_clean; |
| 1757 | u32 value; |
| 1758 | |
| 1759 | spin_lock_irqsave(&adapter->mb_lock, flags); |
| 1760 | |
| 1761 | tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| 1762 | rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); |
| 1763 | rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); |
| 1764 | |
| 1765 | value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| 1766 | MB_RFD_PROD_INDX_SHIFT) | |
| 1767 | ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| 1768 | MB_RRD_CONS_INDX_SHIFT) | |
| 1769 | ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| 1770 | MB_TPD_PROD_INDX_SHIFT); |
| 1771 | iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| 1772 | |
| 1773 | spin_unlock_irqrestore(&adapter->mb_lock, flags); |
| 1774 | } |
| 1775 | |
| 1776 | static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, |
| 1777 | struct rx_return_desc *rrd, u16 offset) |
| 1778 | { |
| 1779 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1780 | |
| 1781 | while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { |
| 1782 | rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; |
| 1783 | if (++rfd_ring->next_to_clean == rfd_ring->count) { |
| 1784 | rfd_ring->next_to_clean = 0; |
| 1785 | } |
| 1786 | } |
| 1787 | } |
| 1788 | |
| 1789 | static void atl1_update_rfd_index(struct atl1_adapter *adapter, |
| 1790 | struct rx_return_desc *rrd) |
| 1791 | { |
| 1792 | u16 num_buf; |
| 1793 | |
| 1794 | num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / |
| 1795 | adapter->rx_buffer_len; |
| 1796 | if (rrd->num_buf == num_buf) |
| 1797 | /* clean alloc flag for bad rrd */ |
| 1798 | atl1_clean_alloc_flag(adapter, rrd, num_buf); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1799 | } |
| 1800 | |
| 1801 | static void atl1_rx_checksum(struct atl1_adapter *adapter, |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1802 | struct rx_return_desc *rrd, struct sk_buff *skb) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1803 | { |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1804 | struct pci_dev *pdev = adapter->pdev; |
| 1805 | |
Jay Cliburn | c2ac3ef | 2008-08-04 19:05:10 -0500 | [diff] [blame] | 1806 | /* |
| 1807 | * The L1 hardware contains a bug that erroneously sets the |
| 1808 | * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a |
| 1809 | * fragmented IP packet is received, even though the packet |
| 1810 | * is perfectly valid and its checksum is correct. There's |
| 1811 | * no way to distinguish between one of these good packets |
| 1812 | * and a packet that actually contains a TCP/UDP checksum |
| 1813 | * error, so all we can do is allow it to be handed up to |
| 1814 | * the higher layers and let it be sorted out there. |
| 1815 | */ |
| 1816 | |
Eric Dumazet | bc8acf2 | 2010-09-02 13:07:41 -0700 | [diff] [blame] | 1817 | skb_checksum_none_assert(skb); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1818 | |
| 1819 | if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| 1820 | if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | |
| 1821 | ERR_FLAG_CODE | ERR_FLAG_OV)) { |
| 1822 | adapter->hw_csum_err++; |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1823 | if (netif_msg_rx_err(adapter)) |
| 1824 | dev_printk(KERN_DEBUG, &pdev->dev, |
| 1825 | "rx checksum error\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1826 | return; |
| 1827 | } |
| 1828 | } |
| 1829 | |
| 1830 | /* not IPv4 */ |
| 1831 | if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) |
| 1832 | /* checksum is invalid, but it's not an IPv4 pkt, so ok */ |
| 1833 | return; |
| 1834 | |
| 1835 | /* IPv4 packet */ |
| 1836 | if (likely(!(rrd->err_flg & |
| 1837 | (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { |
| 1838 | skb->ip_summed = CHECKSUM_UNNECESSARY; |
| 1839 | adapter->hw_csum_good++; |
| 1840 | return; |
| 1841 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1842 | } |
| 1843 | |
| 1844 | /* |
| 1845 | * atl1_alloc_rx_buffers - Replace used receive buffers |
| 1846 | * @adapter: address of board private structure |
| 1847 | */ |
| 1848 | static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) |
| 1849 | { |
| 1850 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1851 | struct pci_dev *pdev = adapter->pdev; |
| 1852 | struct page *page; |
| 1853 | unsigned long offset; |
| 1854 | struct atl1_buffer *buffer_info, *next_info; |
| 1855 | struct sk_buff *skb; |
| 1856 | u16 num_alloc = 0; |
| 1857 | u16 rfd_next_to_use, next_next; |
| 1858 | struct rx_free_desc *rfd_desc; |
| 1859 | |
| 1860 | next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); |
| 1861 | if (++next_next == rfd_ring->count) |
| 1862 | next_next = 0; |
| 1863 | buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| 1864 | next_info = &rfd_ring->buffer_info[next_next]; |
| 1865 | |
| 1866 | while (!buffer_info->alloced && !next_info->alloced) { |
| 1867 | if (buffer_info->skb) { |
| 1868 | buffer_info->alloced = 1; |
| 1869 | goto next; |
| 1870 | } |
| 1871 | |
| 1872 | rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); |
| 1873 | |
Eric Dumazet | 89d71a6 | 2009-10-13 05:34:20 +0000 | [diff] [blame] | 1874 | skb = netdev_alloc_skb_ip_align(adapter->netdev, |
| 1875 | adapter->rx_buffer_len); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1876 | if (unlikely(!skb)) { |
| 1877 | /* Better luck next round */ |
Stephen Hemminger | 02e7173 | 2008-10-31 16:52:03 -0700 | [diff] [blame] | 1878 | adapter->netdev->stats.rx_dropped++; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1879 | break; |
| 1880 | } |
| 1881 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1882 | buffer_info->alloced = 1; |
| 1883 | buffer_info->skb = skb; |
| 1884 | buffer_info->length = (u16) adapter->rx_buffer_len; |
| 1885 | page = virt_to_page(skb->data); |
| 1886 | offset = (unsigned long)skb->data & ~PAGE_MASK; |
| 1887 | buffer_info->dma = pci_map_page(pdev, page, offset, |
| 1888 | adapter->rx_buffer_len, |
| 1889 | PCI_DMA_FROMDEVICE); |
| 1890 | rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); |
| 1891 | rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); |
| 1892 | rfd_desc->coalese = 0; |
| 1893 | |
| 1894 | next: |
| 1895 | rfd_next_to_use = next_next; |
| 1896 | if (unlikely(++next_next == rfd_ring->count)) |
| 1897 | next_next = 0; |
| 1898 | |
| 1899 | buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| 1900 | next_info = &rfd_ring->buffer_info[next_next]; |
| 1901 | num_alloc++; |
| 1902 | } |
| 1903 | |
| 1904 | if (num_alloc) { |
| 1905 | /* |
| 1906 | * Force memory writes to complete before letting h/w |
| 1907 | * know there are new descriptors to fetch. (Only |
| 1908 | * applicable for weak-ordered memory model archs, |
| 1909 | * such as IA-64). |
| 1910 | */ |
| 1911 | wmb(); |
| 1912 | atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); |
| 1913 | } |
| 1914 | return num_alloc; |
| 1915 | } |
| 1916 | |
| 1917 | static void atl1_intr_rx(struct atl1_adapter *adapter) |
| 1918 | { |
| 1919 | int i, count; |
| 1920 | u16 length; |
| 1921 | u16 rrd_next_to_clean; |
| 1922 | u32 value; |
| 1923 | struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| 1924 | struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| 1925 | struct atl1_buffer *buffer_info; |
| 1926 | struct rx_return_desc *rrd; |
| 1927 | struct sk_buff *skb; |
| 1928 | |
| 1929 | count = 0; |
| 1930 | |
| 1931 | rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); |
| 1932 | |
| 1933 | while (1) { |
| 1934 | rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); |
| 1935 | i = 1; |
| 1936 | if (likely(rrd->xsz.valid)) { /* packet valid */ |
| 1937 | chk_rrd: |
| 1938 | /* check rrd status */ |
| 1939 | if (likely(rrd->num_buf == 1)) |
| 1940 | goto rrd_ok; |
Jay Cliburn | 235ffa1 | 2008-02-02 19:50:10 -0600 | [diff] [blame] | 1941 | else if (netif_msg_rx_err(adapter)) { |
| 1942 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1943 | "unexpected RRD buffer count\n"); |
| 1944 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1945 | "rx_buf_len = %d\n", |
| 1946 | adapter->rx_buffer_len); |
| 1947 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1948 | "RRD num_buf = %d\n", |
| 1949 | rrd->num_buf); |
| 1950 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1951 | "RRD pkt_len = %d\n", |
| 1952 | rrd->xsz.xsum_sz.pkt_size); |
| 1953 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1954 | "RRD pkt_flg = 0x%08X\n", |
| 1955 | rrd->pkt_flg); |
| 1956 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1957 | "RRD err_flg = 0x%08X\n", |
| 1958 | rrd->err_flg); |
| 1959 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1960 | "RRD vlan_tag = 0x%08X\n", |
| 1961 | rrd->vlan_tag); |
| 1962 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1963 | |
| 1964 | /* rrd seems to be bad */ |
| 1965 | if (unlikely(i-- > 0)) { |
| 1966 | /* rrd may not be DMAed completely */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1967 | udelay(1); |
| 1968 | goto chk_rrd; |
| 1969 | } |
| 1970 | /* bad rrd */ |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 1971 | if (netif_msg_rx_err(adapter)) |
| 1972 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 1973 | "bad RRD\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1974 | /* see if update RFD index */ |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1975 | if (rrd->num_buf > 1) |
| 1976 | atl1_update_rfd_index(adapter, rrd); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1977 | |
| 1978 | /* update rrd */ |
| 1979 | rrd->xsz.valid = 0; |
| 1980 | if (++rrd_next_to_clean == rrd_ring->count) |
| 1981 | rrd_next_to_clean = 0; |
| 1982 | count++; |
| 1983 | continue; |
| 1984 | } else { /* current rrd still not be updated */ |
| 1985 | |
| 1986 | break; |
| 1987 | } |
| 1988 | rrd_ok: |
| 1989 | /* clean alloc flag for bad rrd */ |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 1990 | atl1_clean_alloc_flag(adapter, rrd, 0); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 1991 | |
| 1992 | buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; |
| 1993 | if (++rfd_ring->next_to_clean == rfd_ring->count) |
| 1994 | rfd_ring->next_to_clean = 0; |
| 1995 | |
| 1996 | /* update rrd next to clean */ |
| 1997 | if (++rrd_next_to_clean == rrd_ring->count) |
| 1998 | rrd_next_to_clean = 0; |
| 1999 | count++; |
| 2000 | |
| 2001 | if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| 2002 | if (!(rrd->err_flg & |
| 2003 | (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM |
| 2004 | | ERR_FLAG_LEN))) { |
| 2005 | /* packet error, don't need upstream */ |
| 2006 | buffer_info->alloced = 0; |
| 2007 | rrd->xsz.valid = 0; |
| 2008 | continue; |
| 2009 | } |
| 2010 | } |
| 2011 | |
| 2012 | /* Good Receive */ |
| 2013 | pci_unmap_page(adapter->pdev, buffer_info->dma, |
| 2014 | buffer_info->length, PCI_DMA_FROMDEVICE); |
Alexey Dobriyan | aefdbf1 | 2008-05-23 02:00:25 +0400 | [diff] [blame] | 2015 | buffer_info->dma = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2016 | skb = buffer_info->skb; |
| 2017 | length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); |
| 2018 | |
Jay Cliburn | a3093d9 | 2007-07-19 18:45:14 -0500 | [diff] [blame] | 2019 | skb_put(skb, length - ETH_FCS_LEN); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2020 | |
| 2021 | /* Receive Checksum Offload */ |
| 2022 | atl1_rx_checksum(adapter, rrd, skb); |
| 2023 | skb->protocol = eth_type_trans(skb, adapter->netdev); |
| 2024 | |
| 2025 | if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { |
| 2026 | u16 vlan_tag = (rrd->vlan_tag >> 4) | |
| 2027 | ((rrd->vlan_tag & 7) << 13) | |
| 2028 | ((rrd->vlan_tag & 8) << 9); |
| 2029 | vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); |
| 2030 | } else |
| 2031 | netif_rx(skb); |
| 2032 | |
| 2033 | /* let protocol layer free skb */ |
| 2034 | buffer_info->skb = NULL; |
| 2035 | buffer_info->alloced = 0; |
| 2036 | rrd->xsz.valid = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2037 | } |
| 2038 | |
| 2039 | atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); |
| 2040 | |
| 2041 | atl1_alloc_rx_buffers(adapter); |
| 2042 | |
| 2043 | /* update mailbox ? */ |
| 2044 | if (count) { |
| 2045 | u32 tpd_next_to_use; |
| 2046 | u32 rfd_next_to_use; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2047 | |
| 2048 | spin_lock(&adapter->mb_lock); |
| 2049 | |
| 2050 | tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| 2051 | rfd_next_to_use = |
| 2052 | atomic_read(&adapter->rfd_ring.next_to_use); |
| 2053 | rrd_next_to_clean = |
| 2054 | atomic_read(&adapter->rrd_ring.next_to_clean); |
| 2055 | value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| 2056 | MB_RFD_PROD_INDX_SHIFT) | |
| 2057 | ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| 2058 | MB_RRD_CONS_INDX_SHIFT) | |
| 2059 | ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| 2060 | MB_TPD_PROD_INDX_SHIFT); |
| 2061 | iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| 2062 | spin_unlock(&adapter->mb_lock); |
| 2063 | } |
| 2064 | } |
| 2065 | |
| 2066 | static void atl1_intr_tx(struct atl1_adapter *adapter) |
| 2067 | { |
| 2068 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 2069 | struct atl1_buffer *buffer_info; |
| 2070 | u16 sw_tpd_next_to_clean; |
| 2071 | u16 cmb_tpd_next_to_clean; |
| 2072 | |
| 2073 | sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| 2074 | cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); |
| 2075 | |
| 2076 | while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { |
| 2077 | struct tx_packet_desc *tpd; |
| 2078 | |
| 2079 | tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); |
| 2080 | buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; |
| 2081 | if (buffer_info->dma) { |
| 2082 | pci_unmap_page(adapter->pdev, buffer_info->dma, |
| 2083 | buffer_info->length, PCI_DMA_TODEVICE); |
| 2084 | buffer_info->dma = 0; |
| 2085 | } |
| 2086 | |
| 2087 | if (buffer_info->skb) { |
| 2088 | dev_kfree_skb_irq(buffer_info->skb); |
| 2089 | buffer_info->skb = NULL; |
| 2090 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2091 | |
| 2092 | if (++sw_tpd_next_to_clean == tpd_ring->count) |
| 2093 | sw_tpd_next_to_clean = 0; |
| 2094 | } |
| 2095 | atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); |
| 2096 | |
Joe Perches | 8e95a20 | 2009-12-03 07:58:21 +0000 | [diff] [blame] | 2097 | if (netif_queue_stopped(adapter->netdev) && |
| 2098 | netif_carrier_ok(adapter->netdev)) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2099 | netif_wake_queue(adapter->netdev); |
| 2100 | } |
| 2101 | |
Jay Cliburn | e6a7ff4 | 2007-07-19 18:45:10 -0500 | [diff] [blame] | 2102 | static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2103 | { |
| 2104 | u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| 2105 | u16 next_to_use = atomic_read(&tpd_ring->next_to_use); |
Eric Dumazet | 807540b | 2010-09-23 05:40:09 +0000 | [diff] [blame] | 2106 | return (next_to_clean > next_to_use) ? |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2107 | next_to_clean - next_to_use - 1 : |
Eric Dumazet | 807540b | 2010-09-23 05:40:09 +0000 | [diff] [blame] | 2108 | tpd_ring->count + next_to_clean - next_to_use - 1; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2109 | } |
| 2110 | |
| 2111 | static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2112 | struct tx_packet_desc *ptpd) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2113 | { |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2114 | u8 hdr_len, ip_off; |
| 2115 | u32 real_len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2116 | int err; |
| 2117 | |
| 2118 | if (skb_shinfo(skb)->gso_size) { |
| 2119 | if (skb_header_cloned(skb)) { |
| 2120 | err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| 2121 | if (unlikely(err)) |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2122 | return -1; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2123 | } |
| 2124 | |
Al Viro | d63ddce | 2008-05-21 01:34:30 +0100 | [diff] [blame] | 2125 | if (skb->protocol == htons(ETH_P_IP)) { |
Arnaldo Carvalho de Melo | eddc9ec | 2007-04-20 22:47:35 -0700 | [diff] [blame] | 2126 | struct iphdr *iph = ip_hdr(skb); |
| 2127 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2128 | real_len = (((unsigned char *)iph - skb->data) + |
| 2129 | ntohs(iph->tot_len)); |
| 2130 | if (real_len < skb->len) |
| 2131 | pskb_trim(skb, real_len); |
| 2132 | hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); |
| 2133 | if (skb->len == hdr_len) { |
| 2134 | iph->check = 0; |
| 2135 | tcp_hdr(skb)->check = |
| 2136 | ~csum_tcpudp_magic(iph->saddr, |
| 2137 | iph->daddr, tcp_hdrlen(skb), |
| 2138 | IPPROTO_TCP, 0); |
| 2139 | ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << |
| 2140 | TPD_IPHL_SHIFT; |
| 2141 | ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & |
| 2142 | TPD_TCPHDRLEN_MASK) << |
| 2143 | TPD_TCPHDRLEN_SHIFT; |
| 2144 | ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; |
| 2145 | ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; |
| 2146 | return 1; |
| 2147 | } |
| 2148 | |
Arnaldo Carvalho de Melo | eddc9ec | 2007-04-20 22:47:35 -0700 | [diff] [blame] | 2149 | iph->check = 0; |
Arnaldo Carvalho de Melo | aa8223c | 2007-04-10 21:04:22 -0700 | [diff] [blame] | 2150 | tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2151 | iph->daddr, 0, IPPROTO_TCP, 0); |
| 2152 | ip_off = (unsigned char *)iph - |
| 2153 | (unsigned char *) skb_network_header(skb); |
| 2154 | if (ip_off == 8) /* 802.3-SNAP frame */ |
| 2155 | ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; |
| 2156 | else if (ip_off != 0) |
| 2157 | return -2; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2158 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2159 | ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << |
| 2160 | TPD_IPHL_SHIFT; |
| 2161 | ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & |
| 2162 | TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; |
| 2163 | ptpd->word3 |= (skb_shinfo(skb)->gso_size & |
| 2164 | TPD_MSS_MASK) << TPD_MSS_SHIFT; |
| 2165 | ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; |
| 2166 | return 3; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2167 | } |
| 2168 | } |
| 2169 | return false; |
| 2170 | } |
| 2171 | |
| 2172 | static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2173 | struct tx_packet_desc *ptpd) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2174 | { |
| 2175 | u8 css, cso; |
| 2176 | |
| 2177 | if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
Michał Mirosław | 55508d6 | 2010-12-14 15:24:08 +0000 | [diff] [blame] | 2178 | css = skb_checksum_start_offset(skb); |
Jay Cliburn | 5ca3bc3 | 2008-02-02 19:50:08 -0600 | [diff] [blame] | 2179 | cso = css + (u8) skb->csum_offset; |
| 2180 | if (unlikely(css & 0x1)) { |
| 2181 | /* L1 hardware requires an even number here */ |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2182 | if (netif_msg_tx_err(adapter)) |
| 2183 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 2184 | "payload offset not an even number\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2185 | return -1; |
| 2186 | } |
Jay Cliburn | 5ca3bc3 | 2008-02-02 19:50:08 -0600 | [diff] [blame] | 2187 | ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2188 | TPD_PLOADOFFSET_SHIFT; |
Jay Cliburn | 5ca3bc3 | 2008-02-02 19:50:08 -0600 | [diff] [blame] | 2189 | ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2190 | TPD_CCSUMOFFSET_SHIFT; |
| 2191 | ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2192 | return true; |
| 2193 | } |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2194 | return 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2195 | } |
| 2196 | |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2197 | static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2198 | struct tx_packet_desc *ptpd) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2199 | { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2200 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| 2201 | struct atl1_buffer *buffer_info; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2202 | u16 buf_len = skb->len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2203 | struct page *page; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2204 | unsigned long offset; |
| 2205 | unsigned int nr_frags; |
| 2206 | unsigned int f; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2207 | int retval; |
| 2208 | u16 next_to_use; |
| 2209 | u16 data_len; |
| 2210 | u8 hdr_len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2211 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2212 | buf_len -= skb->data_len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2213 | nr_frags = skb_shinfo(skb)->nr_frags; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2214 | next_to_use = atomic_read(&tpd_ring->next_to_use); |
| 2215 | buffer_info = &tpd_ring->buffer_info[next_to_use]; |
Alexander Beregalov | 0ee904c | 2009-04-11 14:50:23 +0000 | [diff] [blame] | 2216 | BUG_ON(buffer_info->skb); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2217 | /* put skb in last TPD */ |
| 2218 | buffer_info->skb = NULL; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2219 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2220 | retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; |
| 2221 | if (retval) { |
| 2222 | /* TSO */ |
| 2223 | hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| 2224 | buffer_info->length = hdr_len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2225 | page = virt_to_page(skb->data); |
| 2226 | offset = (unsigned long)skb->data & ~PAGE_MASK; |
| 2227 | buffer_info->dma = pci_map_page(adapter->pdev, page, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2228 | offset, hdr_len, |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2229 | PCI_DMA_TODEVICE); |
| 2230 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2231 | if (++next_to_use == tpd_ring->count) |
| 2232 | next_to_use = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2233 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2234 | if (buf_len > hdr_len) { |
| 2235 | int i, nseg; |
Stephen Hemminger | ddfce6b | 2007-10-05 17:19:47 -0700 | [diff] [blame] | 2236 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2237 | data_len = buf_len - hdr_len; |
| 2238 | nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2239 | ATL1_MAX_TX_BUF_LEN; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2240 | for (i = 0; i < nseg; i++) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2241 | buffer_info = |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2242 | &tpd_ring->buffer_info[next_to_use]; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2243 | buffer_info->skb = NULL; |
| 2244 | buffer_info->length = |
Jay Cliburn | 2b11614 | 2007-07-15 11:03:26 -0500 | [diff] [blame] | 2245 | (ATL1_MAX_TX_BUF_LEN >= |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2246 | data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; |
| 2247 | data_len -= buffer_info->length; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2248 | page = virt_to_page(skb->data + |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2249 | (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2250 | offset = (unsigned long)(skb->data + |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2251 | (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) & |
| 2252 | ~PAGE_MASK; |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2253 | buffer_info->dma = pci_map_page(adapter->pdev, |
| 2254 | page, offset, buffer_info->length, |
| 2255 | PCI_DMA_TODEVICE); |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2256 | if (++next_to_use == tpd_ring->count) |
| 2257 | next_to_use = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2258 | } |
| 2259 | } |
| 2260 | } else { |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2261 | /* not TSO */ |
| 2262 | buffer_info->length = buf_len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2263 | page = virt_to_page(skb->data); |
| 2264 | offset = (unsigned long)skb->data & ~PAGE_MASK; |
| 2265 | buffer_info->dma = pci_map_page(adapter->pdev, page, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2266 | offset, buf_len, PCI_DMA_TODEVICE); |
| 2267 | if (++next_to_use == tpd_ring->count) |
| 2268 | next_to_use = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2269 | } |
| 2270 | |
| 2271 | for (f = 0; f < nr_frags; f++) { |
| 2272 | struct skb_frag_struct *frag; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2273 | u16 i, nseg; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2274 | |
| 2275 | frag = &skb_shinfo(skb)->frags[f]; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2276 | buf_len = frag->size; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2277 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2278 | nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / |
| 2279 | ATL1_MAX_TX_BUF_LEN; |
| 2280 | for (i = 0; i < nseg; i++) { |
| 2281 | buffer_info = &tpd_ring->buffer_info[next_to_use]; |
Alexander Beregalov | 0ee904c | 2009-04-11 14:50:23 +0000 | [diff] [blame] | 2282 | BUG_ON(buffer_info->skb); |
| 2283 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2284 | buffer_info->skb = NULL; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2285 | buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? |
| 2286 | ATL1_MAX_TX_BUF_LEN : buf_len; |
| 2287 | buf_len -= buffer_info->length; |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2288 | buffer_info->dma = pci_map_page(adapter->pdev, |
| 2289 | frag->page, |
| 2290 | frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), |
| 2291 | buffer_info->length, PCI_DMA_TODEVICE); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2292 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2293 | if (++next_to_use == tpd_ring->count) |
| 2294 | next_to_use = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2295 | } |
| 2296 | } |
| 2297 | |
| 2298 | /* last tpd's buffer-info */ |
| 2299 | buffer_info->skb = skb; |
| 2300 | } |
| 2301 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2302 | static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, |
| 2303 | struct tx_packet_desc *ptpd) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2304 | { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2305 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2306 | struct atl1_buffer *buffer_info; |
| 2307 | struct tx_packet_desc *tpd; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2308 | u16 j; |
| 2309 | u32 val; |
| 2310 | u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2311 | |
| 2312 | for (j = 0; j < count; j++) { |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2313 | buffer_info = &tpd_ring->buffer_info[next_to_use]; |
| 2314 | tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); |
| 2315 | if (tpd != ptpd) |
| 2316 | memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2317 | tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
Jay Cliburn | dc5596d | 2008-10-29 11:01:36 -0500 | [diff] [blame] | 2318 | tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); |
| 2319 | tpd->word2 |= (cpu_to_le16(buffer_info->length) & |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2320 | TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2321 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2322 | /* |
| 2323 | * if this is the first packet in a TSO chain, set |
| 2324 | * TPD_HDRFLAG, otherwise, clear it. |
| 2325 | */ |
| 2326 | val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & |
| 2327 | TPD_SEGMENT_EN_MASK; |
| 2328 | if (val) { |
| 2329 | if (!j) |
| 2330 | tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; |
| 2331 | else |
| 2332 | tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); |
| 2333 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2334 | |
| 2335 | if (j == (count - 1)) |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2336 | tpd->word3 |= 1 << TPD_EOP_SHIFT; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2337 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2338 | if (++next_to_use == tpd_ring->count) |
| 2339 | next_to_use = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2340 | } |
| 2341 | /* |
| 2342 | * Force memory writes to complete before letting h/w |
| 2343 | * know there are new descriptors to fetch. (Only |
| 2344 | * applicable for weak-ordered memory model archs, |
| 2345 | * such as IA-64). |
| 2346 | */ |
| 2347 | wmb(); |
| 2348 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2349 | atomic_set(&tpd_ring->next_to_use, next_to_use); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2350 | } |
| 2351 | |
Stephen Hemminger | 61357325 | 2009-08-31 19:50:58 +0000 | [diff] [blame] | 2352 | static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb, |
| 2353 | struct net_device *netdev) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2354 | { |
| 2355 | struct atl1_adapter *adapter = netdev_priv(netdev); |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2356 | struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
Eric Dumazet | e743d31 | 2010-04-14 15:59:40 -0700 | [diff] [blame] | 2357 | int len; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2358 | int tso; |
| 2359 | int count = 1; |
| 2360 | int ret_val; |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2361 | struct tx_packet_desc *ptpd; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2362 | u16 frag_size; |
| 2363 | u16 vlan_tag; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2364 | unsigned int nr_frags = 0; |
| 2365 | unsigned int mss = 0; |
| 2366 | unsigned int f; |
| 2367 | unsigned int proto_hdr_len; |
| 2368 | |
Eric Dumazet | e743d31 | 2010-04-14 15:59:40 -0700 | [diff] [blame] | 2369 | len = skb_headlen(skb); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2370 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2371 | if (unlikely(skb->len <= 0)) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2372 | dev_kfree_skb_any(skb); |
| 2373 | return NETDEV_TX_OK; |
| 2374 | } |
| 2375 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2376 | nr_frags = skb_shinfo(skb)->nr_frags; |
| 2377 | for (f = 0; f < nr_frags; f++) { |
| 2378 | frag_size = skb_shinfo(skb)->frags[f].size; |
| 2379 | if (frag_size) |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2380 | count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / |
| 2381 | ATL1_MAX_TX_BUF_LEN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2382 | } |
| 2383 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2384 | mss = skb_shinfo(skb)->gso_size; |
| 2385 | if (mss) { |
Eric Dumazet | 17d0cdf | 2009-06-11 17:23:24 -0700 | [diff] [blame] | 2386 | if (skb->protocol == htons(ETH_P_IP)) { |
Arnaldo Carvalho de Melo | ea2ae17 | 2007-04-25 17:55:53 -0700 | [diff] [blame] | 2387 | proto_hdr_len = (skb_transport_offset(skb) + |
Arnaldo Carvalho de Melo | ab6a5bb | 2007-03-18 17:43:48 -0700 | [diff] [blame] | 2388 | tcp_hdrlen(skb)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2389 | if (unlikely(proto_hdr_len > len)) { |
| 2390 | dev_kfree_skb_any(skb); |
| 2391 | return NETDEV_TX_OK; |
| 2392 | } |
| 2393 | /* need additional TPD ? */ |
| 2394 | if (proto_hdr_len != len) |
| 2395 | count += (len - proto_hdr_len + |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2396 | ATL1_MAX_TX_BUF_LEN - 1) / |
| 2397 | ATL1_MAX_TX_BUF_LEN; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2398 | } |
| 2399 | } |
| 2400 | |
Jay Cliburn | e6a7ff4 | 2007-07-19 18:45:10 -0500 | [diff] [blame] | 2401 | if (atl1_tpd_avail(&adapter->tpd_ring) < count) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2402 | /* not enough descriptors */ |
| 2403 | netif_stop_queue(netdev); |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2404 | if (netif_msg_tx_queued(adapter)) |
| 2405 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 2406 | "tx busy\n"); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2407 | return NETDEV_TX_BUSY; |
| 2408 | } |
| 2409 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2410 | ptpd = ATL1_TPD_DESC(tpd_ring, |
| 2411 | (u16) atomic_read(&tpd_ring->next_to_use)); |
| 2412 | memset(ptpd, 0, sizeof(struct tx_packet_desc)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2413 | |
Jesse Gross | eab6d18 | 2010-10-20 13:56:03 +0000 | [diff] [blame] | 2414 | if (vlan_tx_tag_present(skb)) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2415 | vlan_tag = vlan_tx_tag_get(skb); |
| 2416 | vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | |
| 2417 | ((vlan_tag >> 9) & 0x8); |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2418 | ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; |
Jay Cliburn | dc5596d | 2008-10-29 11:01:36 -0500 | [diff] [blame] | 2419 | ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << |
| 2420 | TPD_VLANTAG_SHIFT; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2421 | } |
| 2422 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2423 | tso = atl1_tso(adapter, skb, ptpd); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2424 | if (tso < 0) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2425 | dev_kfree_skb_any(skb); |
| 2426 | return NETDEV_TX_OK; |
| 2427 | } |
| 2428 | |
| 2429 | if (!tso) { |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2430 | ret_val = atl1_tx_csum(adapter, skb, ptpd); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2431 | if (ret_val < 0) { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2432 | dev_kfree_skb_any(skb); |
| 2433 | return NETDEV_TX_OK; |
| 2434 | } |
| 2435 | } |
| 2436 | |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 2437 | atl1_tx_map(adapter, skb, ptpd); |
| 2438 | atl1_tx_queue(adapter, count, ptpd); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2439 | atl1_update_mailbox(adapter); |
Jay Cliburn | e109832 | 2008-09-27 04:17:21 +0000 | [diff] [blame] | 2440 | mmiowb(); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2441 | return NETDEV_TX_OK; |
| 2442 | } |
| 2443 | |
| 2444 | /* |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2445 | * atl1_intr - Interrupt Handler |
| 2446 | * @irq: interrupt number |
| 2447 | * @data: pointer to a network interface device structure |
| 2448 | * @pt_regs: CPU registers structure |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2449 | */ |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2450 | static irqreturn_t atl1_intr(int irq, void *data) |
| 2451 | { |
| 2452 | struct atl1_adapter *adapter = netdev_priv(data); |
| 2453 | u32 status; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2454 | int max_ints = 10; |
| 2455 | |
| 2456 | status = adapter->cmb.cmb->int_stats; |
| 2457 | if (!status) |
| 2458 | return IRQ_NONE; |
| 2459 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2460 | do { |
| 2461 | /* clear CMB interrupt status at once */ |
| 2462 | adapter->cmb.cmb->int_stats = 0; |
| 2463 | |
| 2464 | if (status & ISR_GPHY) /* clear phy status */ |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2465 | atlx_clear_phy_int(adapter); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2466 | |
| 2467 | /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ |
| 2468 | iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); |
| 2469 | |
| 2470 | /* check if SMB intr */ |
| 2471 | if (status & ISR_SMB) |
| 2472 | atl1_inc_smb(adapter); |
| 2473 | |
| 2474 | /* check if PCIE PHY Link down */ |
| 2475 | if (status & ISR_PHY_LINKDOWN) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2476 | if (netif_msg_intr(adapter)) |
| 2477 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 2478 | "pcie phy link down %x\n", status); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2479 | if (netif_running(adapter->netdev)) { /* reset MAC */ |
| 2480 | iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| 2481 | schedule_work(&adapter->pcie_dma_to_rst_task); |
| 2482 | return IRQ_HANDLED; |
| 2483 | } |
| 2484 | } |
| 2485 | |
| 2486 | /* check if DMA read/write error ? */ |
| 2487 | if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2488 | if (netif_msg_intr(adapter)) |
| 2489 | dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| 2490 | "pcie DMA r/w error (status = 0x%x)\n", |
| 2491 | status); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2492 | iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| 2493 | schedule_work(&adapter->pcie_dma_to_rst_task); |
| 2494 | return IRQ_HANDLED; |
| 2495 | } |
| 2496 | |
| 2497 | /* link event */ |
| 2498 | if (status & ISR_GPHY) { |
| 2499 | adapter->soft_stats.tx_carrier_errors++; |
| 2500 | atl1_check_for_link(adapter); |
| 2501 | } |
| 2502 | |
| 2503 | /* transmit event */ |
| 2504 | if (status & ISR_CMB_TX) |
| 2505 | atl1_intr_tx(adapter); |
| 2506 | |
| 2507 | /* rx exception */ |
| 2508 | if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | |
| 2509 | ISR_RRD_OV | ISR_HOST_RFD_UNRUN | |
| 2510 | ISR_HOST_RRD_OV | ISR_CMB_RX))) { |
| 2511 | if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | |
| 2512 | ISR_RRD_OV | ISR_HOST_RFD_UNRUN | |
| 2513 | ISR_HOST_RRD_OV)) |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2514 | if (netif_msg_intr(adapter)) |
| 2515 | dev_printk(KERN_DEBUG, |
| 2516 | &adapter->pdev->dev, |
| 2517 | "rx exception, ISR = 0x%x\n", |
| 2518 | status); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2519 | atl1_intr_rx(adapter); |
| 2520 | } |
| 2521 | |
| 2522 | if (--max_ints < 0) |
| 2523 | break; |
| 2524 | |
| 2525 | } while ((status = adapter->cmb.cmb->int_stats)); |
| 2526 | |
| 2527 | /* re-enable Interrupt */ |
| 2528 | iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); |
| 2529 | return IRQ_HANDLED; |
| 2530 | } |
| 2531 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2532 | |
| 2533 | /* |
| 2534 | * atl1_phy_config - Timer Call-back |
| 2535 | * @data: pointer to netdev cast into an unsigned long |
| 2536 | */ |
| 2537 | static void atl1_phy_config(unsigned long data) |
| 2538 | { |
| 2539 | struct atl1_adapter *adapter = (struct atl1_adapter *)data; |
| 2540 | struct atl1_hw *hw = &adapter->hw; |
| 2541 | unsigned long flags; |
| 2542 | |
| 2543 | spin_lock_irqsave(&adapter->lock, flags); |
| 2544 | adapter->phy_timer_pending = false; |
| 2545 | atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2546 | atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2547 | atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); |
| 2548 | spin_unlock_irqrestore(&adapter->lock, flags); |
| 2549 | } |
| 2550 | |
| 2551 | /* |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2552 | * Orphaned vendor comment left intact here: |
| 2553 | * <vendor comment> |
| 2554 | * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT |
| 2555 | * will assert. We do soft reset <0x1400=1> according |
| 2556 | * with the SPEC. BUT, it seemes that PCIE or DMA |
| 2557 | * state-machine will not be reset. DMAR_TO_INT will |
| 2558 | * assert again and again. |
| 2559 | * </vendor comment> |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2560 | */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2561 | |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 2562 | static int atl1_reset(struct atl1_adapter *adapter) |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2563 | { |
| 2564 | int ret; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2565 | ret = atl1_reset_hw(&adapter->hw); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2566 | if (ret) |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2567 | return ret; |
| 2568 | return atl1_init_hw(&adapter->hw); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2569 | } |
| 2570 | |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 2571 | static s32 atl1_up(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2572 | { |
| 2573 | struct net_device *netdev = adapter->netdev; |
| 2574 | int err; |
| 2575 | int irq_flags = IRQF_SAMPLE_RANDOM; |
| 2576 | |
| 2577 | /* hardware has been reset, we need to reload some things */ |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2578 | atlx_set_multi(netdev); |
Jay Cliburn | 2ca13da | 2007-07-15 11:03:28 -0500 | [diff] [blame] | 2579 | atl1_init_ring_ptrs(adapter); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2580 | atlx_restore_vlan(adapter); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2581 | err = atl1_alloc_rx_buffers(adapter); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2582 | if (unlikely(!err)) |
| 2583 | /* no RX BUFFER allocated */ |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2584 | return -ENOMEM; |
| 2585 | |
| 2586 | if (unlikely(atl1_configure(adapter))) { |
| 2587 | err = -EIO; |
| 2588 | goto err_up; |
| 2589 | } |
| 2590 | |
| 2591 | err = pci_enable_msi(adapter->pdev); |
| 2592 | if (err) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2593 | if (netif_msg_ifup(adapter)) |
| 2594 | dev_info(&adapter->pdev->dev, |
| 2595 | "Unable to enable MSI: %d\n", err); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2596 | irq_flags |= IRQF_SHARED; |
| 2597 | } |
| 2598 | |
Joe Perches | a0607fd | 2009-11-18 23:29:17 -0800 | [diff] [blame] | 2599 | err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags, |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2600 | netdev->name, netdev); |
| 2601 | if (unlikely(err)) |
| 2602 | goto err_up; |
| 2603 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2604 | atlx_irq_enable(adapter); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2605 | atl1_check_link(adapter); |
David S. Miller | 39d4815 | 2008-07-21 08:28:37 -0700 | [diff] [blame] | 2606 | netif_start_queue(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2607 | return 0; |
| 2608 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2609 | err_up: |
| 2610 | pci_disable_msi(adapter->pdev); |
| 2611 | /* free rx_buffers */ |
| 2612 | atl1_clean_rx_ring(adapter); |
| 2613 | return err; |
| 2614 | } |
| 2615 | |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 2616 | static void atl1_down(struct atl1_adapter *adapter) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2617 | { |
| 2618 | struct net_device *netdev = adapter->netdev; |
| 2619 | |
Jay Cliburn | b29be6d | 2008-09-27 04:17:20 +0000 | [diff] [blame] | 2620 | netif_stop_queue(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2621 | del_timer_sync(&adapter->phy_config_timer); |
| 2622 | adapter->phy_timer_pending = false; |
| 2623 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2624 | atlx_irq_disable(adapter); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2625 | free_irq(adapter->pdev->irq, netdev); |
| 2626 | pci_disable_msi(adapter->pdev); |
| 2627 | atl1_reset_hw(&adapter->hw); |
| 2628 | adapter->cmb.cmb->int_stats = 0; |
| 2629 | |
| 2630 | adapter->link_speed = SPEED_0; |
| 2631 | adapter->link_duplex = -1; |
| 2632 | netif_carrier_off(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2633 | |
| 2634 | atl1_clean_tx_ring(adapter); |
| 2635 | atl1_clean_rx_ring(adapter); |
| 2636 | } |
| 2637 | |
Jay Cliburn | 0dde4ef | 2008-02-02 19:50:11 -0600 | [diff] [blame] | 2638 | static void atl1_tx_timeout_task(struct work_struct *work) |
| 2639 | { |
| 2640 | struct atl1_adapter *adapter = |
| 2641 | container_of(work, struct atl1_adapter, tx_timeout_task); |
| 2642 | struct net_device *netdev = adapter->netdev; |
| 2643 | |
| 2644 | netif_device_detach(netdev); |
| 2645 | atl1_down(adapter); |
| 2646 | atl1_up(adapter); |
| 2647 | netif_device_attach(netdev); |
| 2648 | } |
| 2649 | |
| 2650 | /* |
| 2651 | * atl1_change_mtu - Change the Maximum Transfer Unit |
| 2652 | * @netdev: network interface device structure |
| 2653 | * @new_mtu: new value for maximum frame size |
| 2654 | * |
| 2655 | * Returns 0 on success, negative on failure |
| 2656 | */ |
| 2657 | static int atl1_change_mtu(struct net_device *netdev, int new_mtu) |
| 2658 | { |
| 2659 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 2660 | int old_mtu = netdev->mtu; |
| 2661 | int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| 2662 | |
| 2663 | if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || |
| 2664 | (max_frame > MAX_JUMBO_FRAME_SIZE)) { |
| 2665 | if (netif_msg_link(adapter)) |
| 2666 | dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); |
| 2667 | return -EINVAL; |
| 2668 | } |
| 2669 | |
| 2670 | adapter->hw.max_frame_size = max_frame; |
| 2671 | adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; |
| 2672 | adapter->rx_buffer_len = (max_frame + 7) & ~7; |
| 2673 | adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; |
| 2674 | |
| 2675 | netdev->mtu = new_mtu; |
| 2676 | if ((old_mtu != new_mtu) && netif_running(netdev)) { |
| 2677 | atl1_down(adapter); |
| 2678 | atl1_up(adapter); |
| 2679 | } |
| 2680 | |
| 2681 | return 0; |
| 2682 | } |
| 2683 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2684 | /* |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2685 | * atl1_open - Called when a network interface is made active |
| 2686 | * @netdev: network interface device structure |
| 2687 | * |
| 2688 | * Returns 0 on success, negative value on failure |
| 2689 | * |
| 2690 | * The open entry point is called when a network interface is made |
| 2691 | * active by the system (IFF_UP). At this point all resources needed |
| 2692 | * for transmit and receive operations are allocated, the interrupt |
| 2693 | * handler is registered with the OS, the watchdog timer is started, |
| 2694 | * and the stack is notified that the interface is ready. |
| 2695 | */ |
| 2696 | static int atl1_open(struct net_device *netdev) |
| 2697 | { |
| 2698 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 2699 | int err; |
| 2700 | |
Jay Cliburn | b29be6d | 2008-09-27 04:17:20 +0000 | [diff] [blame] | 2701 | netif_carrier_off(netdev); |
| 2702 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2703 | /* allocate transmit descriptors */ |
| 2704 | err = atl1_setup_ring_resources(adapter); |
| 2705 | if (err) |
| 2706 | return err; |
| 2707 | |
| 2708 | err = atl1_up(adapter); |
| 2709 | if (err) |
| 2710 | goto err_up; |
| 2711 | |
| 2712 | return 0; |
| 2713 | |
| 2714 | err_up: |
| 2715 | atl1_reset(adapter); |
| 2716 | return err; |
| 2717 | } |
| 2718 | |
| 2719 | /* |
| 2720 | * atl1_close - Disables a network interface |
| 2721 | * @netdev: network interface device structure |
| 2722 | * |
| 2723 | * Returns 0, this is not allowed to fail |
| 2724 | * |
| 2725 | * The close entry point is called when an interface is de-activated |
| 2726 | * by the OS. The hardware is still under the drivers control, but |
| 2727 | * needs to be disabled. A global MAC reset is issued to stop the |
| 2728 | * hardware, and all transmit and receive resources are freed. |
| 2729 | */ |
| 2730 | static int atl1_close(struct net_device *netdev) |
| 2731 | { |
| 2732 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 2733 | atl1_down(adapter); |
| 2734 | atl1_free_ring_resources(adapter); |
| 2735 | return 0; |
| 2736 | } |
| 2737 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2738 | #ifdef CONFIG_PM |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2739 | static int atl1_suspend(struct device *dev) |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2740 | { |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2741 | struct pci_dev *pdev = to_pci_dev(dev); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2742 | struct net_device *netdev = pci_get_drvdata(pdev); |
| 2743 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 2744 | struct atl1_hw *hw = &adapter->hw; |
| 2745 | u32 ctrl = 0; |
| 2746 | u32 wufc = adapter->wol; |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2747 | u32 val; |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2748 | u16 speed; |
| 2749 | u16 duplex; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2750 | |
| 2751 | netif_device_detach(netdev); |
| 2752 | if (netif_running(netdev)) |
| 2753 | atl1_down(adapter); |
| 2754 | |
| 2755 | atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
| 2756 | atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2757 | val = ctrl & BMSR_LSTATUS; |
| 2758 | if (val) |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2759 | wufc &= ~ATLX_WUFC_LNKC; |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2760 | if (!wufc) |
| 2761 | goto disable_wol; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2762 | |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2763 | if (val) { |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2764 | val = atl1_get_speed_and_duplex(hw, &speed, &duplex); |
| 2765 | if (val) { |
| 2766 | if (netif_msg_ifdown(adapter)) |
| 2767 | dev_printk(KERN_DEBUG, &pdev->dev, |
| 2768 | "error getting speed/duplex\n"); |
| 2769 | goto disable_wol; |
| 2770 | } |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2771 | |
| 2772 | ctrl = 0; |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2773 | |
| 2774 | /* enable magic packet WOL */ |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2775 | if (wufc & ATLX_WUFC_MAG) |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2776 | ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2777 | iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2778 | ioread32(hw->hw_addr + REG_WOL_CTRL); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2779 | |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2780 | /* configure the mac */ |
| 2781 | ctrl = MAC_CTRL_RX_EN; |
| 2782 | ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 : |
| 2783 | MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT); |
| 2784 | if (duplex == FULL_DUPLEX) |
| 2785 | ctrl |= MAC_CTRL_DUPLX; |
| 2786 | ctrl |= (((u32)adapter->hw.preamble_len & |
| 2787 | MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| 2788 | if (adapter->vlgrp) |
| 2789 | ctrl |= MAC_CTRL_RMV_VLAN; |
| 2790 | if (wufc & ATLX_WUFC_MAG) |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2791 | ctrl |= MAC_CTRL_BC_EN; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2792 | iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2793 | ioread32(hw->hw_addr + REG_MAC_CTRL); |
| 2794 | |
| 2795 | /* poke the PHY */ |
| 2796 | ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| 2797 | ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| 2798 | iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); |
| 2799 | ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2800 | } else { |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2801 | ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); |
| 2802 | iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); |
| 2803 | ioread32(hw->hw_addr + REG_WOL_CTRL); |
| 2804 | iowrite32(0, hw->hw_addr + REG_MAC_CTRL); |
| 2805 | ioread32(hw->hw_addr + REG_MAC_CTRL); |
| 2806 | hw->phy_configured = false; |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2807 | } |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2808 | |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2809 | return 0; |
| 2810 | |
| 2811 | disable_wol: |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2812 | iowrite32(0, hw->hw_addr + REG_WOL_CTRL); |
| 2813 | ioread32(hw->hw_addr + REG_WOL_CTRL); |
| 2814 | ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
| 2815 | ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| 2816 | iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); |
| 2817 | ioread32(hw->hw_addr + REG_PCIE_PHYMISC); |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2818 | hw->phy_configured = false; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2819 | |
| 2820 | return 0; |
| 2821 | } |
| 2822 | |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2823 | static int atl1_resume(struct device *dev) |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2824 | { |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2825 | struct pci_dev *pdev = to_pci_dev(dev); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2826 | struct net_device *netdev = pci_get_drvdata(pdev); |
| 2827 | struct atl1_adapter *adapter = netdev_priv(netdev); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2828 | |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2829 | iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2830 | |
Jay Cliburn | 08e0f1d | 2008-05-09 22:12:07 -0500 | [diff] [blame] | 2831 | atl1_reset_hw(&adapter->hw); |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2832 | |
Luca Tettamanti | ec5a32f | 2010-09-22 10:41:58 +0000 | [diff] [blame] | 2833 | if (netif_running(netdev)) { |
| 2834 | adapter->cmb.cmb->int_stats = 0; |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2835 | atl1_up(adapter); |
Luca Tettamanti | ec5a32f | 2010-09-22 10:41:58 +0000 | [diff] [blame] | 2836 | } |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2837 | netif_device_attach(netdev); |
| 2838 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2839 | return 0; |
| 2840 | } |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2841 | |
| 2842 | static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume); |
| 2843 | #define ATL1_PM_OPS (&atl1_pm_ops) |
| 2844 | |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2845 | #else |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2846 | |
| 2847 | static int atl1_suspend(struct device *dev) { return 0; } |
| 2848 | |
| 2849 | #define ATL1_PM_OPS NULL |
Jay Cliburn | 05ffdd7 | 2007-07-15 11:03:29 -0500 | [diff] [blame] | 2850 | #endif |
| 2851 | |
Jay Cliburn | bf455a2 | 2008-05-09 22:12:08 -0500 | [diff] [blame] | 2852 | static void atl1_shutdown(struct pci_dev *pdev) |
| 2853 | { |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 2854 | struct net_device *netdev = pci_get_drvdata(pdev); |
| 2855 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 2856 | |
| 2857 | atl1_suspend(&pdev->dev); |
| 2858 | pci_wake_from_d3(pdev, adapter->wol); |
| 2859 | pci_set_power_state(pdev, PCI_D3hot); |
Jay Cliburn | bf455a2 | 2008-05-09 22:12:08 -0500 | [diff] [blame] | 2860 | } |
| 2861 | |
Alexey Dobriyan | 497f050 | 2007-05-09 18:52:35 +0400 | [diff] [blame] | 2862 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 2863 | static void atl1_poll_controller(struct net_device *netdev) |
| 2864 | { |
| 2865 | disable_irq(netdev->irq); |
| 2866 | atl1_intr(netdev->irq, netdev); |
| 2867 | enable_irq(netdev->irq); |
| 2868 | } |
| 2869 | #endif |
| 2870 | |
Stephen Hemminger | 825a84d | 2008-11-19 22:14:17 -0800 | [diff] [blame] | 2871 | static const struct net_device_ops atl1_netdev_ops = { |
| 2872 | .ndo_open = atl1_open, |
| 2873 | .ndo_stop = atl1_close, |
Stephen Hemminger | 0082982 | 2008-11-20 20:14:53 -0800 | [diff] [blame] | 2874 | .ndo_start_xmit = atl1_xmit_frame, |
Stephen Hemminger | 825a84d | 2008-11-19 22:14:17 -0800 | [diff] [blame] | 2875 | .ndo_set_multicast_list = atlx_set_multi, |
| 2876 | .ndo_validate_addr = eth_validate_addr, |
| 2877 | .ndo_set_mac_address = atl1_set_mac, |
| 2878 | .ndo_change_mtu = atl1_change_mtu, |
| 2879 | .ndo_do_ioctl = atlx_ioctl, |
Stephen Hemminger | 0082982 | 2008-11-20 20:14:53 -0800 | [diff] [blame] | 2880 | .ndo_tx_timeout = atlx_tx_timeout, |
Stephen Hemminger | 825a84d | 2008-11-19 22:14:17 -0800 | [diff] [blame] | 2881 | .ndo_vlan_rx_register = atlx_vlan_rx_register, |
| 2882 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 2883 | .ndo_poll_controller = atl1_poll_controller, |
| 2884 | #endif |
| 2885 | }; |
| 2886 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2887 | /* |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2888 | * atl1_probe - Device Initialization Routine |
| 2889 | * @pdev: PCI device information struct |
| 2890 | * @ent: entry in atl1_pci_tbl |
| 2891 | * |
| 2892 | * Returns 0 on success, negative on failure |
| 2893 | * |
| 2894 | * atl1_probe initializes an adapter identified by a pci_dev structure. |
| 2895 | * The OS initialization, configuring of the adapter private structure, |
| 2896 | * and a hardware reset occur. |
| 2897 | */ |
| 2898 | static int __devinit atl1_probe(struct pci_dev *pdev, |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2899 | const struct pci_device_id *ent) |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2900 | { |
| 2901 | struct net_device *netdev; |
| 2902 | struct atl1_adapter *adapter; |
| 2903 | static int cards_found = 0; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2904 | int err; |
| 2905 | |
| 2906 | err = pci_enable_device(pdev); |
| 2907 | if (err) |
| 2908 | return err; |
| 2909 | |
Luca Tettamanti | 5f08e46 | 2007-09-07 20:25:01 -0400 | [diff] [blame] | 2910 | /* |
Chris Snook | cdcc520 | 2007-09-20 15:57:15 -0400 | [diff] [blame] | 2911 | * The atl1 chip can DMA to 64-bit addresses, but it uses a single |
| 2912 | * shared register for the high 32 bits, so only a single, aligned, |
| 2913 | * 4 GB physical address range can be used at a time. |
| 2914 | * |
| 2915 | * Supporting 64-bit DMA on this hardware is more trouble than it's |
| 2916 | * worth. It is far easier to limit to 32-bit DMA than update |
| 2917 | * various kernel subsystems to support the mechanics required by a |
| 2918 | * fixed-high-32-bit system. |
Luca Tettamanti | 5f08e46 | 2007-09-07 20:25:01 -0400 | [diff] [blame] | 2919 | */ |
Yang Hongyang | 284901a | 2009-04-06 19:01:15 -0700 | [diff] [blame] | 2920 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2921 | if (err) { |
Luca Tettamanti | 5f08e46 | 2007-09-07 20:25:01 -0400 | [diff] [blame] | 2922 | dev_err(&pdev->dev, "no usable DMA configuration\n"); |
| 2923 | goto err_dma; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2924 | } |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2925 | /* |
| 2926 | * Mark all PCI regions associated with PCI device |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2927 | * pdev as being reserved by owner atl1_driver_name |
| 2928 | */ |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2929 | err = pci_request_regions(pdev, ATLX_DRIVER_NAME); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2930 | if (err) |
| 2931 | goto err_request_regions; |
| 2932 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2933 | /* |
| 2934 | * Enables bus-mastering on the device and calls |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2935 | * pcibios_set_master to do the needed arch specific settings |
| 2936 | */ |
| 2937 | pci_set_master(pdev); |
| 2938 | |
| 2939 | netdev = alloc_etherdev(sizeof(struct atl1_adapter)); |
| 2940 | if (!netdev) { |
| 2941 | err = -ENOMEM; |
| 2942 | goto err_alloc_etherdev; |
| 2943 | } |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2944 | SET_NETDEV_DEV(netdev, &pdev->dev); |
| 2945 | |
| 2946 | pci_set_drvdata(pdev, netdev); |
| 2947 | adapter = netdev_priv(netdev); |
| 2948 | adapter->netdev = netdev; |
| 2949 | adapter->pdev = pdev; |
| 2950 | adapter->hw.back = adapter; |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2951 | adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2952 | |
| 2953 | adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); |
| 2954 | if (!adapter->hw.hw_addr) { |
| 2955 | err = -EIO; |
| 2956 | goto err_pci_iomap; |
| 2957 | } |
| 2958 | /* get device revision number */ |
Jay Cliburn | 1e00636 | 2007-04-29 21:42:10 -0500 | [diff] [blame] | 2959 | adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 2960 | (REG_MASTER_CTRL + 2)); |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 2961 | if (netif_msg_probe(adapter)) |
| 2962 | dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2963 | |
| 2964 | /* set default ring resource counts */ |
| 2965 | adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; |
| 2966 | adapter->tpd_ring.count = ATL1_DEFAULT_TPD; |
| 2967 | |
| 2968 | adapter->mii.dev = netdev; |
| 2969 | adapter->mii.mdio_read = mdio_read; |
| 2970 | adapter->mii.mdio_write = mdio_write; |
| 2971 | adapter->mii.phy_id_mask = 0x1f; |
| 2972 | adapter->mii.reg_num_mask = 0x1f; |
| 2973 | |
Stephen Hemminger | 825a84d | 2008-11-19 22:14:17 -0800 | [diff] [blame] | 2974 | netdev->netdev_ops = &atl1_netdev_ops; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2975 | netdev->watchdog_timeo = 5 * HZ; |
Stephen Hemminger | cb434e3 | 2007-06-01 09:44:00 -0700 | [diff] [blame] | 2976 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2977 | netdev->ethtool_ops = &atl1_ethtool_ops; |
| 2978 | adapter->bd_number = cards_found; |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2979 | |
| 2980 | /* setup the private structure */ |
| 2981 | err = atl1_sw_init(adapter); |
| 2982 | if (err) |
| 2983 | goto err_common; |
| 2984 | |
| 2985 | netdev->features = NETIF_F_HW_CSUM; |
| 2986 | netdev->features |= NETIF_F_SG; |
| 2987 | netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2988 | |
| 2989 | /* |
| 2990 | * patch for some L1 of old version, |
| 2991 | * the final version of L1 may not need these |
| 2992 | * patches |
| 2993 | */ |
| 2994 | /* atl1_pcie_patch(adapter); */ |
| 2995 | |
| 2996 | /* really reset GPHY core */ |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 2997 | iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 2998 | |
| 2999 | /* |
| 3000 | * reset the controller to |
| 3001 | * put the device in a known good starting state |
| 3002 | */ |
| 3003 | if (atl1_reset_hw(&adapter->hw)) { |
| 3004 | err = -EIO; |
| 3005 | goto err_common; |
| 3006 | } |
| 3007 | |
| 3008 | /* copy the MAC address out of the EEPROM */ |
| 3009 | atl1_read_mac_addr(&adapter->hw); |
| 3010 | memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); |
| 3011 | |
| 3012 | if (!is_valid_ether_addr(netdev->dev_addr)) { |
| 3013 | err = -EIO; |
| 3014 | goto err_common; |
| 3015 | } |
| 3016 | |
| 3017 | atl1_check_options(adapter); |
| 3018 | |
| 3019 | /* pre-init the MAC, and setup link */ |
| 3020 | err = atl1_init_hw(&adapter->hw); |
| 3021 | if (err) { |
| 3022 | err = -EIO; |
| 3023 | goto err_common; |
| 3024 | } |
| 3025 | |
| 3026 | atl1_pcie_patch(adapter); |
| 3027 | /* assume we have no link for now */ |
| 3028 | netif_carrier_off(netdev); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3029 | |
Joe Perches | c061b18 | 2010-08-23 18:20:03 +0000 | [diff] [blame] | 3030 | setup_timer(&adapter->phy_config_timer, atl1_phy_config, |
Stephen Hemminger | e053b62 | 2008-10-31 16:52:04 -0700 | [diff] [blame] | 3031 | (unsigned long)adapter); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3032 | adapter->phy_timer_pending = false; |
| 3033 | |
| 3034 | INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); |
| 3035 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3036 | INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3037 | |
| 3038 | INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); |
| 3039 | |
| 3040 | err = register_netdev(netdev); |
| 3041 | if (err) |
| 3042 | goto err_common; |
| 3043 | |
| 3044 | cards_found++; |
| 3045 | atl1_via_workaround(adapter); |
| 3046 | return 0; |
| 3047 | |
| 3048 | err_common: |
| 3049 | pci_iounmap(pdev, adapter->hw.hw_addr); |
| 3050 | err_pci_iomap: |
| 3051 | free_netdev(netdev); |
| 3052 | err_alloc_etherdev: |
| 3053 | pci_release_regions(pdev); |
| 3054 | err_dma: |
| 3055 | err_request_regions: |
| 3056 | pci_disable_device(pdev); |
| 3057 | return err; |
| 3058 | } |
| 3059 | |
| 3060 | /* |
| 3061 | * atl1_remove - Device Removal Routine |
| 3062 | * @pdev: PCI device information struct |
| 3063 | * |
| 3064 | * atl1_remove is called by the PCI subsystem to alert the driver |
| 3065 | * that it should release a PCI device. The could be caused by a |
| 3066 | * Hot-Plug event, or because the driver is going to be removed from |
| 3067 | * memory. |
| 3068 | */ |
| 3069 | static void __devexit atl1_remove(struct pci_dev *pdev) |
| 3070 | { |
| 3071 | struct net_device *netdev = pci_get_drvdata(pdev); |
| 3072 | struct atl1_adapter *adapter; |
| 3073 | /* Device not available. Return. */ |
| 3074 | if (!netdev) |
| 3075 | return; |
| 3076 | |
| 3077 | adapter = netdev_priv(netdev); |
Chris Snook | 8c754a0 | 2007-03-28 20:51:51 -0400 | [diff] [blame] | 3078 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3079 | /* |
| 3080 | * Some atl1 boards lack persistent storage for their MAC, and get it |
Chris Snook | 8c754a0 | 2007-03-28 20:51:51 -0400 | [diff] [blame] | 3081 | * from the BIOS during POST. If we've been messing with the MAC |
| 3082 | * address, we need to save the permanent one. |
| 3083 | */ |
| 3084 | if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { |
Jay Cliburn | 53ffb42 | 2007-07-15 11:03:27 -0500 | [diff] [blame] | 3085 | memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, |
| 3086 | ETH_ALEN); |
Chris Snook | 8c754a0 | 2007-03-28 20:51:51 -0400 | [diff] [blame] | 3087 | atl1_set_mac_addr(&adapter->hw); |
| 3088 | } |
| 3089 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3090 | iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3091 | unregister_netdev(netdev); |
| 3092 | pci_iounmap(pdev, adapter->hw.hw_addr); |
| 3093 | pci_release_regions(pdev); |
| 3094 | free_netdev(netdev); |
| 3095 | pci_disable_device(pdev); |
| 3096 | } |
| 3097 | |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3098 | static struct pci_driver atl1_driver = { |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3099 | .name = ATLX_DRIVER_NAME, |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3100 | .id_table = atl1_pci_tbl, |
| 3101 | .probe = atl1_probe, |
| 3102 | .remove = __devexit_p(atl1_remove), |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 3103 | .shutdown = atl1_shutdown, |
| 3104 | .driver.pm = ATL1_PM_OPS, |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3105 | }; |
| 3106 | |
| 3107 | /* |
| 3108 | * atl1_exit_module - Driver Exit Cleanup Routine |
| 3109 | * |
| 3110 | * atl1_exit_module is called just before the driver is removed |
| 3111 | * from memory. |
| 3112 | */ |
| 3113 | static void __exit atl1_exit_module(void) |
| 3114 | { |
| 3115 | pci_unregister_driver(&atl1_driver); |
| 3116 | } |
| 3117 | |
| 3118 | /* |
| 3119 | * atl1_init_module - Driver Registration Routine |
| 3120 | * |
| 3121 | * atl1_init_module is the first routine called when the driver is |
| 3122 | * loaded. All it does is register with the PCI subsystem. |
| 3123 | */ |
| 3124 | static int __init atl1_init_module(void) |
| 3125 | { |
Jay Cliburn | f3cc28c | 2007-02-08 10:42:37 -0500 | [diff] [blame] | 3126 | return pci_register_driver(&atl1_driver); |
| 3127 | } |
| 3128 | |
| 3129 | module_init(atl1_init_module); |
| 3130 | module_exit(atl1_exit_module); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3131 | |
| 3132 | struct atl1_stats { |
| 3133 | char stat_string[ETH_GSTRING_LEN]; |
| 3134 | int sizeof_stat; |
| 3135 | int stat_offset; |
| 3136 | }; |
| 3137 | |
| 3138 | #define ATL1_STAT(m) \ |
| 3139 | sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) |
| 3140 | |
| 3141 | static struct atl1_stats atl1_gstrings_stats[] = { |
| 3142 | {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, |
| 3143 | {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, |
| 3144 | {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, |
| 3145 | {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, |
| 3146 | {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, |
| 3147 | {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3148 | {"multicast", ATL1_STAT(soft_stats.multicast)}, |
| 3149 | {"collisions", ATL1_STAT(soft_stats.collisions)}, |
| 3150 | {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, |
| 3151 | {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, |
| 3152 | {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, |
| 3153 | {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, |
| 3154 | {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, |
| 3155 | {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, |
| 3156 | {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, |
| 3157 | {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, |
| 3158 | {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, |
| 3159 | {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, |
| 3160 | {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, |
| 3161 | {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, |
| 3162 | {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, |
| 3163 | {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, |
| 3164 | {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, |
| 3165 | {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, |
| 3166 | {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, |
| 3167 | {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, |
| 3168 | {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, |
| 3169 | {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, |
| 3170 | {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} |
| 3171 | }; |
| 3172 | |
| 3173 | static void atl1_get_ethtool_stats(struct net_device *netdev, |
| 3174 | struct ethtool_stats *stats, u64 *data) |
| 3175 | { |
| 3176 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3177 | int i; |
| 3178 | char *p; |
| 3179 | |
| 3180 | for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { |
| 3181 | p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; |
| 3182 | data[i] = (atl1_gstrings_stats[i].sizeof_stat == |
| 3183 | sizeof(u64)) ? *(u64 *)p : *(u32 *)p; |
| 3184 | } |
| 3185 | |
| 3186 | } |
| 3187 | |
| 3188 | static int atl1_get_sset_count(struct net_device *netdev, int sset) |
| 3189 | { |
| 3190 | switch (sset) { |
| 3191 | case ETH_SS_STATS: |
| 3192 | return ARRAY_SIZE(atl1_gstrings_stats); |
| 3193 | default: |
| 3194 | return -EOPNOTSUPP; |
| 3195 | } |
| 3196 | } |
| 3197 | |
| 3198 | static int atl1_get_settings(struct net_device *netdev, |
| 3199 | struct ethtool_cmd *ecmd) |
| 3200 | { |
| 3201 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3202 | struct atl1_hw *hw = &adapter->hw; |
| 3203 | |
| 3204 | ecmd->supported = (SUPPORTED_10baseT_Half | |
| 3205 | SUPPORTED_10baseT_Full | |
| 3206 | SUPPORTED_100baseT_Half | |
| 3207 | SUPPORTED_100baseT_Full | |
| 3208 | SUPPORTED_1000baseT_Full | |
| 3209 | SUPPORTED_Autoneg | SUPPORTED_TP); |
| 3210 | ecmd->advertising = ADVERTISED_TP; |
| 3211 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3212 | hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| 3213 | ecmd->advertising |= ADVERTISED_Autoneg; |
| 3214 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { |
| 3215 | ecmd->advertising |= ADVERTISED_Autoneg; |
| 3216 | ecmd->advertising |= |
| 3217 | (ADVERTISED_10baseT_Half | |
| 3218 | ADVERTISED_10baseT_Full | |
| 3219 | ADVERTISED_100baseT_Half | |
| 3220 | ADVERTISED_100baseT_Full | |
| 3221 | ADVERTISED_1000baseT_Full); |
| 3222 | } else |
| 3223 | ecmd->advertising |= (ADVERTISED_1000baseT_Full); |
| 3224 | } |
| 3225 | ecmd->port = PORT_TP; |
| 3226 | ecmd->phy_address = 0; |
| 3227 | ecmd->transceiver = XCVR_INTERNAL; |
| 3228 | |
| 3229 | if (netif_carrier_ok(adapter->netdev)) { |
| 3230 | u16 link_speed, link_duplex; |
| 3231 | atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); |
| 3232 | ecmd->speed = link_speed; |
| 3233 | if (link_duplex == FULL_DUPLEX) |
| 3234 | ecmd->duplex = DUPLEX_FULL; |
| 3235 | else |
| 3236 | ecmd->duplex = DUPLEX_HALF; |
| 3237 | } else { |
| 3238 | ecmd->speed = -1; |
| 3239 | ecmd->duplex = -1; |
| 3240 | } |
| 3241 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3242 | hw->media_type == MEDIA_TYPE_1000M_FULL) |
| 3243 | ecmd->autoneg = AUTONEG_ENABLE; |
| 3244 | else |
| 3245 | ecmd->autoneg = AUTONEG_DISABLE; |
| 3246 | |
| 3247 | return 0; |
| 3248 | } |
| 3249 | |
| 3250 | static int atl1_set_settings(struct net_device *netdev, |
| 3251 | struct ethtool_cmd *ecmd) |
| 3252 | { |
| 3253 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3254 | struct atl1_hw *hw = &adapter->hw; |
| 3255 | u16 phy_data; |
| 3256 | int ret_val = 0; |
| 3257 | u16 old_media_type = hw->media_type; |
| 3258 | |
| 3259 | if (netif_running(adapter->netdev)) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3260 | if (netif_msg_link(adapter)) |
| 3261 | dev_dbg(&adapter->pdev->dev, |
| 3262 | "ethtool shutting down adapter\n"); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3263 | atl1_down(adapter); |
| 3264 | } |
| 3265 | |
| 3266 | if (ecmd->autoneg == AUTONEG_ENABLE) |
| 3267 | hw->media_type = MEDIA_TYPE_AUTO_SENSOR; |
| 3268 | else { |
| 3269 | if (ecmd->speed == SPEED_1000) { |
| 3270 | if (ecmd->duplex != DUPLEX_FULL) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3271 | if (netif_msg_link(adapter)) |
| 3272 | dev_warn(&adapter->pdev->dev, |
| 3273 | "1000M half is invalid\n"); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3274 | ret_val = -EINVAL; |
| 3275 | goto exit_sset; |
| 3276 | } |
| 3277 | hw->media_type = MEDIA_TYPE_1000M_FULL; |
| 3278 | } else if (ecmd->speed == SPEED_100) { |
| 3279 | if (ecmd->duplex == DUPLEX_FULL) |
| 3280 | hw->media_type = MEDIA_TYPE_100M_FULL; |
| 3281 | else |
| 3282 | hw->media_type = MEDIA_TYPE_100M_HALF; |
| 3283 | } else { |
| 3284 | if (ecmd->duplex == DUPLEX_FULL) |
| 3285 | hw->media_type = MEDIA_TYPE_10M_FULL; |
| 3286 | else |
| 3287 | hw->media_type = MEDIA_TYPE_10M_HALF; |
| 3288 | } |
| 3289 | } |
| 3290 | switch (hw->media_type) { |
| 3291 | case MEDIA_TYPE_AUTO_SENSOR: |
| 3292 | ecmd->advertising = |
| 3293 | ADVERTISED_10baseT_Half | |
| 3294 | ADVERTISED_10baseT_Full | |
| 3295 | ADVERTISED_100baseT_Half | |
| 3296 | ADVERTISED_100baseT_Full | |
| 3297 | ADVERTISED_1000baseT_Full | |
| 3298 | ADVERTISED_Autoneg | ADVERTISED_TP; |
| 3299 | break; |
| 3300 | case MEDIA_TYPE_1000M_FULL: |
| 3301 | ecmd->advertising = |
| 3302 | ADVERTISED_1000baseT_Full | |
| 3303 | ADVERTISED_Autoneg | ADVERTISED_TP; |
| 3304 | break; |
| 3305 | default: |
| 3306 | ecmd->advertising = 0; |
| 3307 | break; |
| 3308 | } |
| 3309 | if (atl1_phy_setup_autoneg_adv(hw)) { |
| 3310 | ret_val = -EINVAL; |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3311 | if (netif_msg_link(adapter)) |
| 3312 | dev_warn(&adapter->pdev->dev, |
| 3313 | "invalid ethtool speed/duplex setting\n"); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3314 | goto exit_sset; |
| 3315 | } |
| 3316 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3317 | hw->media_type == MEDIA_TYPE_1000M_FULL) |
| 3318 | phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| 3319 | else { |
| 3320 | switch (hw->media_type) { |
| 3321 | case MEDIA_TYPE_100M_FULL: |
| 3322 | phy_data = |
| 3323 | MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| 3324 | MII_CR_RESET; |
| 3325 | break; |
| 3326 | case MEDIA_TYPE_100M_HALF: |
| 3327 | phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| 3328 | break; |
| 3329 | case MEDIA_TYPE_10M_FULL: |
| 3330 | phy_data = |
| 3331 | MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| 3332 | break; |
| 3333 | default: |
| 3334 | /* MEDIA_TYPE_10M_HALF: */ |
| 3335 | phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| 3336 | break; |
| 3337 | } |
| 3338 | } |
| 3339 | atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| 3340 | exit_sset: |
| 3341 | if (ret_val) |
| 3342 | hw->media_type = old_media_type; |
| 3343 | |
| 3344 | if (netif_running(adapter->netdev)) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3345 | if (netif_msg_link(adapter)) |
| 3346 | dev_dbg(&adapter->pdev->dev, |
| 3347 | "ethtool starting adapter\n"); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3348 | atl1_up(adapter); |
| 3349 | } else if (!ret_val) { |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3350 | if (netif_msg_link(adapter)) |
| 3351 | dev_dbg(&adapter->pdev->dev, |
| 3352 | "ethtool resetting adapter\n"); |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3353 | atl1_reset(adapter); |
| 3354 | } |
| 3355 | return ret_val; |
| 3356 | } |
| 3357 | |
| 3358 | static void atl1_get_drvinfo(struct net_device *netdev, |
| 3359 | struct ethtool_drvinfo *drvinfo) |
| 3360 | { |
| 3361 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3362 | |
Roel Kluin | 082ba88 | 2009-08-06 13:06:56 +0000 | [diff] [blame] | 3363 | strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); |
| 3364 | strlcpy(drvinfo->version, ATLX_DRIVER_VERSION, |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3365 | sizeof(drvinfo->version)); |
Roel Kluin | 082ba88 | 2009-08-06 13:06:56 +0000 | [diff] [blame] | 3366 | strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); |
| 3367 | strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3368 | sizeof(drvinfo->bus_info)); |
| 3369 | drvinfo->eedump_len = ATL1_EEDUMP_LEN; |
| 3370 | } |
| 3371 | |
| 3372 | static void atl1_get_wol(struct net_device *netdev, |
| 3373 | struct ethtool_wolinfo *wol) |
| 3374 | { |
| 3375 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3376 | |
J. K. Cliburn | 3b259e3 | 2008-11-09 15:05:30 -0600 | [diff] [blame] | 3377 | wol->supported = WAKE_MAGIC; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3378 | wol->wolopts = 0; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3379 | if (adapter->wol & ATLX_WUFC_MAG) |
| 3380 | wol->wolopts |= WAKE_MAGIC; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3381 | } |
| 3382 | |
| 3383 | static int atl1_set_wol(struct net_device *netdev, |
| 3384 | struct ethtool_wolinfo *wol) |
| 3385 | { |
| 3386 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3387 | |
J. K. Cliburn | 3b259e3 | 2008-11-09 15:05:30 -0600 | [diff] [blame] | 3388 | if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | |
| 3389 | WAKE_ARP | WAKE_MAGICSECURE)) |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3390 | return -EOPNOTSUPP; |
| 3391 | adapter->wol = 0; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3392 | if (wol->wolopts & WAKE_MAGIC) |
| 3393 | adapter->wol |= ATLX_WUFC_MAG; |
Rafael J. Wysocki | dd68153 | 2011-02-10 06:55:19 +0000 | [diff] [blame^] | 3394 | |
| 3395 | device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
| 3396 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3397 | return 0; |
| 3398 | } |
| 3399 | |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3400 | static u32 atl1_get_msglevel(struct net_device *netdev) |
| 3401 | { |
| 3402 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3403 | return adapter->msg_enable; |
| 3404 | } |
| 3405 | |
| 3406 | static void atl1_set_msglevel(struct net_device *netdev, u32 value) |
| 3407 | { |
| 3408 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3409 | adapter->msg_enable = value; |
| 3410 | } |
| 3411 | |
Jay Cliburn | c67c9a2 | 2008-02-02 19:50:06 -0600 | [diff] [blame] | 3412 | static int atl1_get_regs_len(struct net_device *netdev) |
| 3413 | { |
| 3414 | return ATL1_REG_COUNT * sizeof(u32); |
| 3415 | } |
| 3416 | |
| 3417 | static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, |
| 3418 | void *p) |
| 3419 | { |
| 3420 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3421 | struct atl1_hw *hw = &adapter->hw; |
| 3422 | unsigned int i; |
| 3423 | u32 *regbuf = p; |
| 3424 | |
| 3425 | for (i = 0; i < ATL1_REG_COUNT; i++) { |
| 3426 | /* |
| 3427 | * This switch statement avoids reserved regions |
| 3428 | * of register space. |
| 3429 | */ |
| 3430 | switch (i) { |
| 3431 | case 6 ... 9: |
| 3432 | case 14: |
| 3433 | case 29 ... 31: |
| 3434 | case 34 ... 63: |
| 3435 | case 75 ... 127: |
| 3436 | case 136 ... 1023: |
| 3437 | case 1027 ... 1087: |
| 3438 | case 1091 ... 1151: |
| 3439 | case 1194 ... 1195: |
| 3440 | case 1200 ... 1201: |
| 3441 | case 1206 ... 1213: |
| 3442 | case 1216 ... 1279: |
| 3443 | case 1290 ... 1311: |
| 3444 | case 1323 ... 1343: |
| 3445 | case 1358 ... 1359: |
| 3446 | case 1368 ... 1375: |
| 3447 | case 1378 ... 1383: |
| 3448 | case 1388 ... 1391: |
| 3449 | case 1393 ... 1395: |
| 3450 | case 1402 ... 1403: |
| 3451 | case 1410 ... 1471: |
| 3452 | case 1522 ... 1535: |
| 3453 | /* reserved region; don't read it */ |
| 3454 | regbuf[i] = 0; |
| 3455 | break; |
| 3456 | default: |
| 3457 | /* unreserved region */ |
| 3458 | regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); |
| 3459 | } |
| 3460 | } |
| 3461 | } |
| 3462 | |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3463 | static void atl1_get_ringparam(struct net_device *netdev, |
| 3464 | struct ethtool_ringparam *ring) |
| 3465 | { |
| 3466 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3467 | struct atl1_tpd_ring *txdr = &adapter->tpd_ring; |
| 3468 | struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; |
| 3469 | |
| 3470 | ring->rx_max_pending = ATL1_MAX_RFD; |
| 3471 | ring->tx_max_pending = ATL1_MAX_TPD; |
| 3472 | ring->rx_mini_max_pending = 0; |
| 3473 | ring->rx_jumbo_max_pending = 0; |
| 3474 | ring->rx_pending = rxdr->count; |
| 3475 | ring->tx_pending = txdr->count; |
| 3476 | ring->rx_mini_pending = 0; |
| 3477 | ring->rx_jumbo_pending = 0; |
| 3478 | } |
| 3479 | |
| 3480 | static int atl1_set_ringparam(struct net_device *netdev, |
| 3481 | struct ethtool_ringparam *ring) |
| 3482 | { |
| 3483 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3484 | struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; |
| 3485 | struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; |
| 3486 | struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; |
| 3487 | |
| 3488 | struct atl1_tpd_ring tpd_old, tpd_new; |
| 3489 | struct atl1_rfd_ring rfd_old, rfd_new; |
| 3490 | struct atl1_rrd_ring rrd_old, rrd_new; |
| 3491 | struct atl1_ring_header rhdr_old, rhdr_new; |
J. K. Cliburn | 2f32c86 | 2011-01-01 05:02:12 +0000 | [diff] [blame] | 3492 | struct atl1_smb smb; |
| 3493 | struct atl1_cmb cmb; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3494 | int err; |
| 3495 | |
| 3496 | tpd_old = adapter->tpd_ring; |
| 3497 | rfd_old = adapter->rfd_ring; |
| 3498 | rrd_old = adapter->rrd_ring; |
| 3499 | rhdr_old = adapter->ring_header; |
| 3500 | |
| 3501 | if (netif_running(adapter->netdev)) |
| 3502 | atl1_down(adapter); |
| 3503 | |
| 3504 | rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); |
| 3505 | rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : |
| 3506 | rfdr->count; |
| 3507 | rfdr->count = (rfdr->count + 3) & ~3; |
| 3508 | rrdr->count = rfdr->count; |
| 3509 | |
| 3510 | tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); |
| 3511 | tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : |
| 3512 | tpdr->count; |
| 3513 | tpdr->count = (tpdr->count + 3) & ~3; |
| 3514 | |
| 3515 | if (netif_running(adapter->netdev)) { |
| 3516 | /* try to get new resources before deleting old */ |
| 3517 | err = atl1_setup_ring_resources(adapter); |
| 3518 | if (err) |
| 3519 | goto err_setup_ring; |
| 3520 | |
| 3521 | /* |
| 3522 | * save the new, restore the old in order to free it, |
| 3523 | * then restore the new back again |
| 3524 | */ |
| 3525 | |
| 3526 | rfd_new = adapter->rfd_ring; |
| 3527 | rrd_new = adapter->rrd_ring; |
| 3528 | tpd_new = adapter->tpd_ring; |
| 3529 | rhdr_new = adapter->ring_header; |
| 3530 | adapter->rfd_ring = rfd_old; |
| 3531 | adapter->rrd_ring = rrd_old; |
| 3532 | adapter->tpd_ring = tpd_old; |
| 3533 | adapter->ring_header = rhdr_old; |
J. K. Cliburn | 2f32c86 | 2011-01-01 05:02:12 +0000 | [diff] [blame] | 3534 | /* |
| 3535 | * Save SMB and CMB, since atl1_free_ring_resources |
| 3536 | * will clear them. |
| 3537 | */ |
| 3538 | smb = adapter->smb; |
| 3539 | cmb = adapter->cmb; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3540 | atl1_free_ring_resources(adapter); |
| 3541 | adapter->rfd_ring = rfd_new; |
| 3542 | adapter->rrd_ring = rrd_new; |
| 3543 | adapter->tpd_ring = tpd_new; |
| 3544 | adapter->ring_header = rhdr_new; |
J. K. Cliburn | 2f32c86 | 2011-01-01 05:02:12 +0000 | [diff] [blame] | 3545 | adapter->smb = smb; |
| 3546 | adapter->cmb = cmb; |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3547 | |
| 3548 | err = atl1_up(adapter); |
| 3549 | if (err) |
| 3550 | return err; |
| 3551 | } |
| 3552 | return 0; |
| 3553 | |
| 3554 | err_setup_ring: |
| 3555 | adapter->rfd_ring = rfd_old; |
| 3556 | adapter->rrd_ring = rrd_old; |
| 3557 | adapter->tpd_ring = tpd_old; |
| 3558 | adapter->ring_header = rhdr_old; |
| 3559 | atl1_up(adapter); |
| 3560 | return err; |
| 3561 | } |
| 3562 | |
| 3563 | static void atl1_get_pauseparam(struct net_device *netdev, |
| 3564 | struct ethtool_pauseparam *epause) |
| 3565 | { |
| 3566 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3567 | struct atl1_hw *hw = &adapter->hw; |
| 3568 | |
| 3569 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3570 | hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| 3571 | epause->autoneg = AUTONEG_ENABLE; |
| 3572 | } else { |
| 3573 | epause->autoneg = AUTONEG_DISABLE; |
| 3574 | } |
| 3575 | epause->rx_pause = 1; |
| 3576 | epause->tx_pause = 1; |
| 3577 | } |
| 3578 | |
| 3579 | static int atl1_set_pauseparam(struct net_device *netdev, |
| 3580 | struct ethtool_pauseparam *epause) |
| 3581 | { |
| 3582 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3583 | struct atl1_hw *hw = &adapter->hw; |
| 3584 | |
| 3585 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3586 | hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| 3587 | epause->autoneg = AUTONEG_ENABLE; |
| 3588 | } else { |
| 3589 | epause->autoneg = AUTONEG_DISABLE; |
| 3590 | } |
| 3591 | |
| 3592 | epause->rx_pause = 1; |
| 3593 | epause->tx_pause = 1; |
| 3594 | |
| 3595 | return 0; |
| 3596 | } |
| 3597 | |
| 3598 | /* FIXME: is this right? -- CHS */ |
| 3599 | static u32 atl1_get_rx_csum(struct net_device *netdev) |
| 3600 | { |
| 3601 | return 1; |
| 3602 | } |
| 3603 | |
| 3604 | static void atl1_get_strings(struct net_device *netdev, u32 stringset, |
| 3605 | u8 *data) |
| 3606 | { |
| 3607 | u8 *p = data; |
| 3608 | int i; |
| 3609 | |
| 3610 | switch (stringset) { |
| 3611 | case ETH_SS_STATS: |
| 3612 | for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { |
| 3613 | memcpy(p, atl1_gstrings_stats[i].stat_string, |
| 3614 | ETH_GSTRING_LEN); |
| 3615 | p += ETH_GSTRING_LEN; |
| 3616 | } |
| 3617 | break; |
| 3618 | } |
| 3619 | } |
| 3620 | |
| 3621 | static int atl1_nway_reset(struct net_device *netdev) |
| 3622 | { |
| 3623 | struct atl1_adapter *adapter = netdev_priv(netdev); |
| 3624 | struct atl1_hw *hw = &adapter->hw; |
| 3625 | |
| 3626 | if (netif_running(netdev)) { |
| 3627 | u16 phy_data; |
| 3628 | atl1_down(adapter); |
| 3629 | |
| 3630 | if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || |
| 3631 | hw->media_type == MEDIA_TYPE_1000M_FULL) { |
| 3632 | phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; |
| 3633 | } else { |
| 3634 | switch (hw->media_type) { |
| 3635 | case MEDIA_TYPE_100M_FULL: |
| 3636 | phy_data = MII_CR_FULL_DUPLEX | |
| 3637 | MII_CR_SPEED_100 | MII_CR_RESET; |
| 3638 | break; |
| 3639 | case MEDIA_TYPE_100M_HALF: |
| 3640 | phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| 3641 | break; |
| 3642 | case MEDIA_TYPE_10M_FULL: |
| 3643 | phy_data = MII_CR_FULL_DUPLEX | |
| 3644 | MII_CR_SPEED_10 | MII_CR_RESET; |
| 3645 | break; |
| 3646 | default: |
| 3647 | /* MEDIA_TYPE_10M_HALF */ |
| 3648 | phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| 3649 | } |
| 3650 | } |
| 3651 | atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| 3652 | atl1_up(adapter); |
| 3653 | } |
| 3654 | return 0; |
| 3655 | } |
| 3656 | |
stephen hemminger | ff2d8d6 | 2010-10-21 07:50:50 +0000 | [diff] [blame] | 3657 | static const struct ethtool_ops atl1_ethtool_ops = { |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3658 | .get_settings = atl1_get_settings, |
| 3659 | .set_settings = atl1_set_settings, |
| 3660 | .get_drvinfo = atl1_get_drvinfo, |
| 3661 | .get_wol = atl1_get_wol, |
| 3662 | .set_wol = atl1_set_wol, |
Jay Cliburn | 460578b | 2008-02-02 19:50:09 -0600 | [diff] [blame] | 3663 | .get_msglevel = atl1_get_msglevel, |
| 3664 | .set_msglevel = atl1_set_msglevel, |
Jay Cliburn | c67c9a2 | 2008-02-02 19:50:06 -0600 | [diff] [blame] | 3665 | .get_regs_len = atl1_get_regs_len, |
| 3666 | .get_regs = atl1_get_regs, |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3667 | .get_ringparam = atl1_get_ringparam, |
| 3668 | .set_ringparam = atl1_set_ringparam, |
| 3669 | .get_pauseparam = atl1_get_pauseparam, |
Jay Cliburn | 401c0aa | 2008-02-02 19:50:07 -0600 | [diff] [blame] | 3670 | .set_pauseparam = atl1_set_pauseparam, |
Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 3671 | .get_rx_csum = atl1_get_rx_csum, |
| 3672 | .set_tx_csum = ethtool_op_set_tx_hw_csum, |
| 3673 | .get_link = ethtool_op_get_link, |
| 3674 | .set_sg = ethtool_op_set_sg, |
| 3675 | .get_strings = atl1_get_strings, |
| 3676 | .nway_reset = atl1_nway_reset, |
| 3677 | .get_ethtool_stats = atl1_get_ethtool_stats, |
| 3678 | .get_sset_count = atl1_get_sset_count, |
| 3679 | .set_tso = ethtool_op_set_tso, |
| 3680 | }; |