drivers/net/wireless/iwlwifi/iwl-agn-devices.c

/******************************************************************************
 *
 * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * The full GNU General Public License is included in this distribution in the
 * file called LICENSE.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 *****************************************************************************/

/*
 * DVM device-specific data & functions
 */
#include "iwl-agn.h"
#include "iwl-dev.h"
#include "iwl-commands.h"
#include "iwl-io.h"
#include "iwl-prph.h"

/*
 * 1000 series
 * ===========
 */

/*
 * For 1000, use advance thermal throttling critical temperature threshold,
 * but legacy thermal management implementation for now.
 * This is for the reason of 1000 uCode using advance thermal throttling API
 * but not implement ct_kill_exit based on ct_kill exit temperature
 * so the thermal throttling will still based on legacy thermal throttling
 * management.
 * The code here need to be modified once 1000 uCode has the advanced thermal
 * throttling algorithm in place
 */
static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
{
	/* want Celsius */
	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}

/* NIC configuration for 1000 series */
static void iwl1000_nic_config(struct iwl_priv *priv)
{
	/* set CSR_HW_CONFIG_REG for uCode use */
	iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);

	/* Setting digital SVR for 1000 card to 1.32V */
	/* locking is acquired in iwl_set_bits_mask_prph() function */
	iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
				APMG_SVR_DIGITAL_VOLTAGE_1_32,
				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
}

/**
 * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time
 * @priv -- pointer to iwl_priv data structure
 * @tsf_bits -- number of bits need to shift for masking)
 */
static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv,
					   u16 tsf_bits)
{
	return (1 << tsf_bits) - 1;
}

/**
 * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time
 * @priv -- pointer to iwl_priv data structure
 * @tsf_bits -- number of bits need to shift for masking)
 */
static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv,
					    u16 tsf_bits)
{
	return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
}

/*
 * extended beacon time format
 * time in usec will be changed into a 32-bit value in extended:internal format
 * the extended part is the beacon counts
 * the internal part is the time in usec within one beacon interval
 */
static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec,
				u32 beacon_interval)
{
	u32 quot;
	u32 rem;
	u32 interval = beacon_interval * TIME_UNIT;

	if (!interval || !usec)
		return 0;

	quot = (usec / interval) &
		(iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >>
		IWLAGN_EXT_BEACON_TIME_POS);
	rem = (usec % interval) & iwl_beacon_time_mask_low(priv,
				   IWLAGN_EXT_BEACON_TIME_POS);

	return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem;
}

/* base is usually what we get from ucode with each received frame,
 * the same as HW timer counter counting down
 */
static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
			   u32 addon, u32 beacon_interval)
{
	u32 base_low = base & iwl_beacon_time_mask_low(priv,
				IWLAGN_EXT_BEACON_TIME_POS);
	u32 addon_low = addon & iwl_beacon_time_mask_low(priv,
				IWLAGN_EXT_BEACON_TIME_POS);
	u32 interval = beacon_interval * TIME_UNIT;
	u32 res = (base & iwl_beacon_time_mask_high(priv,
				IWLAGN_EXT_BEACON_TIME_POS)) +
				(addon & iwl_beacon_time_mask_high(priv,
				IWLAGN_EXT_BEACON_TIME_POS));

	if (base_low > addon_low)
		res += base_low - addon_low;
	else if (base_low < addon_low) {
		res += interval + base_low - addon_low;
		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
	} else
		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);

	return cpu_to_le32(res);
}

static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
	.min_nrg_cck = 95,
	.auto_corr_min_ofdm = 90,
	.auto_corr_min_ofdm_mrc = 170,
	.auto_corr_min_ofdm_x1 = 120,
	.auto_corr_min_ofdm_mrc_x1 = 240,

	.auto_corr_max_ofdm = 120,
	.auto_corr_max_ofdm_mrc = 210,
	.auto_corr_max_ofdm_x1 = 155,
	.auto_corr_max_ofdm_mrc_x1 = 290,

	.auto_corr_min_cck = 125,
	.auto_corr_max_cck = 200,
	.auto_corr_min_cck_mrc = 170,
	.auto_corr_max_cck_mrc = 400,
	.nrg_th_cck = 95,
	.nrg_th_ofdm = 95,

	.barker_corr_th_min = 190,
	.barker_corr_th_min_mrc = 390,
	.nrg_th_cca = 62,
};

static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
{
	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ);

	priv->hw_params.tx_chains_num =
		num_of_ant(priv->hw_params.valid_tx_ant);
	if (priv->cfg->rx_with_siso_diversity)
		priv->hw_params.rx_chains_num = 1;
	else
		priv->hw_params.rx_chains_num =
			num_of_ant(priv->hw_params.valid_rx_ant);

	iwl1000_set_ct_threshold(priv);

	/* Set initial sensitivity parameters */
	priv->hw_params.sens = &iwl1000_sensitivity;
}

struct iwl_lib_ops iwl1000_lib = {
	.set_hw_params = iwl1000_hw_set_hw_params,
	.nic_config = iwl1000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REGULATORY_BAND_NO_HT40,
		},
	},
	.temperature = iwlagn_temperature,
};


/*
 * 2000 series
 * ===========
 */

static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
{
	/* want Celsius */
	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}

/* NIC configuration for 2000 series */
static void iwl2000_nic_config(struct iwl_priv *priv)
{
	iwl_rf_config(priv);

	iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
		    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
}

static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
	.min_nrg_cck = 97,
	.auto_corr_min_ofdm = 80,
	.auto_corr_min_ofdm_mrc = 128,
	.auto_corr_min_ofdm_x1 = 105,
	.auto_corr_min_ofdm_mrc_x1 = 192,

	.auto_corr_max_ofdm = 145,
	.auto_corr_max_ofdm_mrc = 232,
	.auto_corr_max_ofdm_x1 = 110,
	.auto_corr_max_ofdm_mrc_x1 = 232,

	.auto_corr_min_cck = 125,
	.auto_corr_max_cck = 175,
	.auto_corr_min_cck_mrc = 160,
	.auto_corr_max_cck_mrc = 310,
	.nrg_th_cck = 97,
	.nrg_th_ofdm = 100,

	.barker_corr_th_min = 190,
	.barker_corr_th_min_mrc = 390,
	.nrg_th_cca = 62,
};

static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
{
	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ);

	priv->hw_params.tx_chains_num =
		num_of_ant(priv->hw_params.valid_tx_ant);
	if (priv->cfg->rx_with_siso_diversity)
		priv->hw_params.rx_chains_num = 1;
	else
		priv->hw_params.rx_chains_num =
			num_of_ant(priv->hw_params.valid_rx_ant);

	iwl2000_set_ct_threshold(priv);

	/* Set initial sensitivity parameters */
	priv->hw_params.sens = &iwl2000_sensitivity;
}

struct iwl_lib_ops iwl2000_lib = {
	.set_hw_params = iwl2000_hw_set_hw_params,
	.nic_config = iwl2000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REGULATORY_BAND_NO_HT40,
		},
		.enhanced_txpower = true,
	},
	.temperature = iwlagn_temperature,
};

struct iwl_lib_ops iwl2030_lib = {
	.set_hw_params = iwl2000_hw_set_hw_params,
	.nic_config = iwl2000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REGULATORY_BAND_NO_HT40,
		},
		.enhanced_txpower = true,
	},
	.temperature = iwlagn_temperature,
};

/*
 * 5000 series
 * ===========
 */

/* NIC configuration for 5000 series */
static void iwl5000_nic_config(struct iwl_priv *priv)
{
	iwl_rf_config(priv);

	/* W/A : NIC is stuck in a reset state after Early PCIe power off
	 * (PCIe power is lost before PERST# is asserted),
	 * causing ME FW to lose ownership and not being able to obtain it back.
	 */
	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
}

static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
	.min_nrg_cck = 100,
	.auto_corr_min_ofdm = 90,
	.auto_corr_min_ofdm_mrc = 170,
	.auto_corr_min_ofdm_x1 = 105,
	.auto_corr_min_ofdm_mrc_x1 = 220,

	.auto_corr_max_ofdm = 120,
	.auto_corr_max_ofdm_mrc = 210,
	.auto_corr_max_ofdm_x1 = 120,
	.auto_corr_max_ofdm_mrc_x1 = 240,

	.auto_corr_min_cck = 125,
	.auto_corr_max_cck = 200,
	.auto_corr_min_cck_mrc = 200,
	.auto_corr_max_cck_mrc = 400,
	.nrg_th_cck = 100,
	.nrg_th_ofdm = 100,

	.barker_corr_th_min = 190,
	.barker_corr_th_min_mrc = 390,
	.nrg_th_cca = 62,
};

static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
	.min_nrg_cck = 95,
	.auto_corr_min_ofdm = 90,
	.auto_corr_min_ofdm_mrc = 170,
	.auto_corr_min_ofdm_x1 = 105,
	.auto_corr_min_ofdm_mrc_x1 = 220,

	.auto_corr_max_ofdm = 120,
	.auto_corr_max_ofdm_mrc = 210,
	/* max = min for performance bug in 5150 DSP */
	.auto_corr_max_ofdm_x1 = 105,
	.auto_corr_max_ofdm_mrc_x1 = 220,

	.auto_corr_min_cck = 125,
	.auto_corr_max_cck = 200,
	.auto_corr_min_cck_mrc = 170,
	.auto_corr_max_cck_mrc = 400,
	.nrg_th_cck = 95,
	.nrg_th_ofdm = 95,

	.barker_corr_th_min = 190,
	.barker_corr_th_min_mrc = 390,
	.nrg_th_cca = 62,
};

#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)

static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
{
	u16 temperature, voltage;
	__le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(priv,
				EEPROM_KELVIN_TEMPERATURE);

	temperature = le16_to_cpu(temp_calib[0]);
	voltage = le16_to_cpu(temp_calib[1]);

	/* offset = temp - volt / coeff */
	return (s32)(temperature -
			voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
}

static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
{
	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
			iwl_temp_calib_to_offset(priv);

	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
}

static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
{
	/* want Celsius */
	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
}

static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
					BIT(IEEE80211_BAND_5GHZ);

	priv->hw_params.tx_chains_num =
		num_of_ant(priv->hw_params.valid_tx_ant);
	priv->hw_params.rx_chains_num =
		num_of_ant(priv->hw_params.valid_rx_ant);

	iwl5000_set_ct_threshold(priv);

	/* Set initial sensitivity parameters */
	priv->hw_params.sens = &iwl5000_sensitivity;
}

static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
{
	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
					BIT(IEEE80211_BAND_5GHZ);

	priv->hw_params.tx_chains_num =
		num_of_ant(priv->hw_params.valid_tx_ant);
	priv->hw_params.rx_chains_num =
		num_of_ant(priv->hw_params.valid_rx_ant);

	iwl5150_set_ct_threshold(priv);

	/* Set initial sensitivity parameters */
	priv->hw_params.sens = &iwl5150_sensitivity;
}

static void iwl5150_temperature(struct iwl_priv *priv)
{
	u32 vt = 0;
	s32 offset =  iwl_temp_calib_to_offset(priv);

	vt = le32_to_cpu(priv->statistics.common.temperature);
	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
	/* now vt hold the temperature in Kelvin */
	priv->temperature = KELVIN_TO_CELSIUS(vt);
	iwl_tt_handler(priv);
}

static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
				     struct ieee80211_channel_switch *ch_switch)
{
	/*
	 * MULTI-FIXME
	 * See iwlagn_mac_channel_switch.
	 */
	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
	struct iwl5000_channel_switch_cmd cmd;
	const struct iwl_channel_info *ch_info;
	u32 switch_time_in_usec, ucode_switch_time;
	u16 ch;
	u32 tsf_low;
	u8 switch_count;
	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
	struct ieee80211_vif *vif = ctx->vif;
	struct iwl_host_cmd hcmd = {
		.id = REPLY_CHANNEL_SWITCH,
		.len = { sizeof(cmd), },
		.flags = CMD_SYNC,
		.data = { &cmd, },
	};

	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
	ch = ch_switch->channel->hw_value;
	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
		      ctx->active.channel, ch);
	cmd.channel = cpu_to_le16(ch);
	cmd.rxon_flags = ctx->staging.flags;
	cmd.rxon_filter_flags = ctx->staging.filter_flags;
	switch_count = ch_switch->count;
	tsf_low = ch_switch->timestamp & 0x0ffffffff;
	/*
	 * calculate the ucode channel switch time
	 * adding TSF as one of the factor for when to switch
	 */
	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
		    beacon_interval)) {
			switch_count -= (priv->ucode_beacon_time -
				tsf_low) / beacon_interval;
		} else
			switch_count = 0;
	}
	if (switch_count <= 1)
		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
	else {
		switch_time_in_usec =
			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
		ucode_switch_time = iwl_usecs_to_beacons(priv,
							 switch_time_in_usec,
							 beacon_interval);
		cmd.switch_time = iwl_add_beacon_time(priv,
						      priv->ucode_beacon_time,
						      ucode_switch_time,
						      beacon_interval);
	}
	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
		      cmd.switch_time);
	ch_info = iwl_get_channel_info(priv, priv->band, ch);
	if (ch_info)
		cmd.expect_beacon = is_channel_radar(ch_info);
	else {
		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
			ctx->active.channel, ch);
		return -EFAULT;
	}

	return iwl_dvm_send_cmd(priv, &hcmd);
}

struct iwl_lib_ops iwl5000_lib = {
	.set_hw_params = iwl5000_hw_set_hw_params,
	.set_channel_switch = iwl5000_hw_channel_switch,
	.nic_config = iwl5000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REG_BAND_52_HT40_CHANNELS
		},
	},
	.temperature = iwlagn_temperature,
};

struct iwl_lib_ops iwl5150_lib = {
	.set_hw_params = iwl5150_hw_set_hw_params,
	.set_channel_switch = iwl5000_hw_channel_switch,
	.nic_config = iwl5000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REG_BAND_52_HT40_CHANNELS
		},
	},
	.temperature = iwl5150_temperature,
};



/*
 * 6000 series
 * ===========
 */

static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
	/* want Celsius */
	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}

/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
	iwl_rf_config(priv);

	switch (priv->cfg->device_family) {
	case IWL_DEVICE_FAMILY_6005:
	case IWL_DEVICE_FAMILY_6030:
	case IWL_DEVICE_FAMILY_6000:
		break;
	case IWL_DEVICE_FAMILY_6000i:
		/* 2x2 IPA phy type */
		iwl_write32(priv->trans, CSR_GP_DRIVER_REG,
			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
		break;
	case IWL_DEVICE_FAMILY_6050:
		/* Indicate calibration version to uCode. */
		if (iwl_eeprom_calib_version(priv) >= 6)
			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
		break;
	case IWL_DEVICE_FAMILY_6150:
		/* Indicate calibration version to uCode. */
		if (iwl_eeprom_calib_version(priv) >= 6)
			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
		iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
			    CSR_GP_DRIVER_REG_BIT_6050_1x2);
		break;
	default:
		WARN_ON(1);
	}
}

static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
	.min_nrg_cck = 110,
	.auto_corr_min_ofdm = 80,
	.auto_corr_min_ofdm_mrc = 128,
	.auto_corr_min_ofdm_x1 = 105,
	.auto_corr_min_ofdm_mrc_x1 = 192,

	.auto_corr_max_ofdm = 145,
	.auto_corr_max_ofdm_mrc = 232,
	.auto_corr_max_ofdm_x1 = 110,
	.auto_corr_max_ofdm_mrc_x1 = 232,

	.auto_corr_min_cck = 125,
	.auto_corr_max_cck = 175,
	.auto_corr_min_cck_mrc = 160,
	.auto_corr_max_cck_mrc = 310,
	.nrg_th_cck = 110,
	.nrg_th_ofdm = 110,

	.barker_corr_th_min = 190,
	.barker_corr_th_min_mrc = 336,
	.nrg_th_cca = 62,
};

static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
					BIT(IEEE80211_BAND_5GHZ);

	priv->hw_params.tx_chains_num =
		num_of_ant(priv->hw_params.valid_tx_ant);
	if (priv->cfg->rx_with_siso_diversity)
		priv->hw_params.rx_chains_num = 1;
	else
		priv->hw_params.rx_chains_num =
			num_of_ant(priv->hw_params.valid_rx_ant);

	iwl6000_set_ct_threshold(priv);

	/* Set initial sensitivity parameters */
	priv->hw_params.sens = &iwl6000_sensitivity;

}

static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
				     struct ieee80211_channel_switch *ch_switch)
{
	/*
	 * MULTI-FIXME
	 * See iwlagn_mac_channel_switch.
	 */
	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
	struct iwl6000_channel_switch_cmd cmd;
	const struct iwl_channel_info *ch_info;
	u32 switch_time_in_usec, ucode_switch_time;
	u16 ch;
	u32 tsf_low;
	u8 switch_count;
	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
	struct ieee80211_vif *vif = ctx->vif;
	struct iwl_host_cmd hcmd = {
		.id = REPLY_CHANNEL_SWITCH,
		.len = { sizeof(cmd), },
		.flags = CMD_SYNC,
		.data = { &cmd, },
	};

	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
	ch = ch_switch->channel->hw_value;
	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
		      ctx->active.channel, ch);
	cmd.channel = cpu_to_le16(ch);
	cmd.rxon_flags = ctx->staging.flags;
	cmd.rxon_filter_flags = ctx->staging.filter_flags;
	switch_count = ch_switch->count;
	tsf_low = ch_switch->timestamp & 0x0ffffffff;
	/*
	 * calculate the ucode channel switch time
	 * adding TSF as one of the factor for when to switch
	 */
	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
		    beacon_interval)) {
			switch_count -= (priv->ucode_beacon_time -
				tsf_low) / beacon_interval;
		} else
			switch_count = 0;
	}
	if (switch_count <= 1)
		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
	else {
		switch_time_in_usec =
			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
		ucode_switch_time = iwl_usecs_to_beacons(priv,
							 switch_time_in_usec,
							 beacon_interval);
		cmd.switch_time = iwl_add_beacon_time(priv,
						      priv->ucode_beacon_time,
						      ucode_switch_time,
						      beacon_interval);
	}
	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
		      cmd.switch_time);
	ch_info = iwl_get_channel_info(priv, priv->band, ch);
	if (ch_info)
		cmd.expect_beacon = is_channel_radar(ch_info);
	else {
		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
			ctx->active.channel, ch);
		return -EFAULT;
	}

	return iwl_dvm_send_cmd(priv, &hcmd);
}

struct iwl_lib_ops iwl6000_lib = {
	.set_hw_params = iwl6000_hw_set_hw_params,
	.set_channel_switch = iwl6000_hw_channel_switch,
	.nic_config = iwl6000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REG_BAND_52_HT40_CHANNELS
		},
		.enhanced_txpower = true,
	},
	.temperature = iwlagn_temperature,
};

struct iwl_lib_ops iwl6030_lib = {
	.set_hw_params = iwl6000_hw_set_hw_params,
	.set_channel_switch = iwl6000_hw_channel_switch,
	.nic_config = iwl6000_nic_config,
	.eeprom_ops = {
		.regulatory_bands = {
			EEPROM_REG_BAND_1_CHANNELS,
			EEPROM_REG_BAND_2_CHANNELS,
			EEPROM_REG_BAND_3_CHANNELS,
			EEPROM_REG_BAND_4_CHANNELS,
			EEPROM_REG_BAND_5_CHANNELS,
			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
			EEPROM_REG_BAND_52_HT40_CHANNELS
		},
		.enhanced_txpower = true,
	},
	.temperature = iwlagn_temperature,
};