| /* Copyright (c) 2008-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef _SPI_QSD_H |
| #define _SPI_QSD_H |
| |
| #define SPI_DRV_NAME "spi_qsd" |
| |
| #if defined(CONFIG_SPI_QSD) || defined(CONFIG_SPI_QSD_MODULE) |
| |
| #define QSD_REG(x) (x) |
| #define QUP_REG(x) |
| |
| #define SPI_FIFO_WORD_CNT 0x0048 |
| |
| #else |
| |
| #define QSD_REG(x) |
| #define QUP_REG(x) (x) |
| |
| #define QUP_CONFIG 0x0000 /* N & NO_INPUT/NO_OUPUT bits */ |
| #define QUP_ERROR_FLAGS_EN 0x030C |
| #define QUP_ERR_MASK 0x3 |
| #define SPI_OUTPUT_FIFO_WORD_CNT 0x010C |
| #define SPI_INPUT_FIFO_WORD_CNT 0x0214 |
| #define QUP_MX_WRITE_COUNT 0x0150 |
| #define QUP_MX_WRITE_CNT_CURRENT 0x0154 |
| |
| #define QUP_CONFIG_SPI_MODE 0x0100 |
| #endif |
| |
| #define GSBI_CTRL_REG 0x0 |
| #define GSBI_SPI_CONFIG 0x30 |
| /* B-family only registers */ |
| #define QUP_HARDWARE_VER 0x0030 |
| #define QUP_HARDWARE_VER_2_1_1 0X20010001 |
| #define QUP_OPERATIONAL_MASK 0x0028 |
| #define QUP_OP_MASK_OUTPUT_SERVICE_FLAG 0x100 |
| #define QUP_OP_MASK_INPUT_SERVICE_FLAG 0x200 |
| |
| #define QUP_ERROR_FLAGS 0x0308 |
| |
| #define SPI_CONFIG QSD_REG(0x0000) QUP_REG(0x0300) |
| #define SPI_IO_CONTROL QSD_REG(0x0004) QUP_REG(0x0304) |
| #define SPI_IO_MODES QSD_REG(0x0008) QUP_REG(0x0008) |
| #define SPI_SW_RESET QSD_REG(0x000C) QUP_REG(0x000C) |
| #define SPI_TIME_OUT_CURRENT QSD_REG(0x0014) QUP_REG(0x0014) |
| #define SPI_MX_OUTPUT_COUNT QSD_REG(0x0018) QUP_REG(0x0100) |
| #define SPI_MX_OUTPUT_CNT_CURRENT QSD_REG(0x001C) QUP_REG(0x0104) |
| #define SPI_MX_INPUT_COUNT QSD_REG(0x0020) QUP_REG(0x0200) |
| #define SPI_MX_INPUT_CNT_CURRENT QSD_REG(0x0024) QUP_REG(0x0204) |
| #define SPI_MX_READ_COUNT QSD_REG(0x0028) QUP_REG(0x0208) |
| #define SPI_MX_READ_CNT_CURRENT QSD_REG(0x002C) QUP_REG(0x020C) |
| #define SPI_OPERATIONAL QSD_REG(0x0030) QUP_REG(0x0018) |
| #define SPI_ERROR_FLAGS QSD_REG(0x0034) QUP_REG(0x001C) |
| #define SPI_ERROR_FLAGS_EN QSD_REG(0x0038) QUP_REG(0x0020) |
| #define SPI_DEASSERT_WAIT QSD_REG(0x003C) QUP_REG(0x0310) |
| #define SPI_OUTPUT_DEBUG QSD_REG(0x0040) QUP_REG(0x0108) |
| #define SPI_INPUT_DEBUG QSD_REG(0x0044) QUP_REG(0x0210) |
| #define SPI_TEST_CTRL QSD_REG(0x004C) QUP_REG(0x0024) |
| #define SPI_OUTPUT_FIFO QSD_REG(0x0100) QUP_REG(0x0110) |
| #define SPI_INPUT_FIFO QSD_REG(0x0200) QUP_REG(0x0218) |
| #define SPI_STATE QSD_REG(SPI_OPERATIONAL) QUP_REG(0x0004) |
| |
| /* QUP_CONFIG fields */ |
| #define SPI_CFG_N 0x0000001F |
| #define SPI_NO_INPUT 0x00000080 |
| #define SPI_NO_OUTPUT 0x00000040 |
| #define SPI_EN_EXT_OUT_FLAG 0x00010000 |
| |
| /* SPI_CONFIG fields */ |
| #define SPI_CFG_LOOPBACK 0x00000100 |
| #define SPI_CFG_INPUT_FIRST 0x00000200 |
| #define SPI_CFG_HS_MODE 0x00000400 |
| |
| /* SPI_IO_CONTROL fields */ |
| #define SPI_IO_C_FORCE_CS 0x00000800 |
| #define SPI_IO_C_CLK_IDLE_HIGH 0x00000400 |
| #define SPI_IO_C_MX_CS_MODE 0x00000100 |
| #define SPI_IO_C_CS_N_POLARITY 0x000000F0 |
| #define SPI_IO_C_CS_N_POLARITY_0 0x00000010 |
| #define SPI_IO_C_CS_SELECT 0x0000000C |
| #define SPI_IO_C_TRISTATE_CS 0x00000002 |
| #define SPI_IO_C_NO_TRI_STATE 0x00000001 |
| |
| /* SPI_IO_MODES fields */ |
| #define SPI_IO_M_OUTPUT_BIT_SHIFT_EN QSD_REG(0x00004000) QUP_REG(0x00010000) |
| #define SPI_IO_M_PACK_EN QSD_REG(0x00002000) QUP_REG(0x00008000) |
| #define SPI_IO_M_UNPACK_EN QSD_REG(0x00001000) QUP_REG(0x00004000) |
| #define SPI_IO_M_INPUT_MODE QSD_REG(0x00000C00) QUP_REG(0x00003000) |
| #define SPI_IO_M_OUTPUT_MODE QSD_REG(0x00000300) QUP_REG(0x00000C00) |
| #define SPI_IO_M_INPUT_FIFO_SIZE QSD_REG(0x000000C0) QUP_REG(0x00000380) |
| #define SPI_IO_M_INPUT_BLOCK_SIZE QSD_REG(0x00000030) QUP_REG(0x00000060) |
| #define SPI_IO_M_OUTPUT_FIFO_SIZE QSD_REG(0x0000000C) QUP_REG(0x0000001C) |
| #define SPI_IO_M_OUTPUT_BLOCK_SIZE QSD_REG(0x00000003) QUP_REG(0x00000003) |
| |
| #define INPUT_BLOCK_SZ_SHIFT QSD_REG(4) QUP_REG(5) |
| #define INPUT_FIFO_SZ_SHIFT QSD_REG(6) QUP_REG(7) |
| #define OUTPUT_BLOCK_SZ_SHIFT QSD_REG(0) QUP_REG(0) |
| #define OUTPUT_FIFO_SZ_SHIFT QSD_REG(2) QUP_REG(2) |
| #define OUTPUT_MODE_SHIFT QSD_REG(8) QUP_REG(10) |
| #define INPUT_MODE_SHIFT QSD_REG(10) QUP_REG(12) |
| |
| /* SPI_OPERATIONAL fields */ |
| #define SPI_OP_MAX_INPUT_DONE_FLAG 0x00000800 |
| #define SPI_OP_MAX_OUTPUT_DONE_FLAG 0x00000400 |
| #define SPI_OP_INPUT_SERVICE_FLAG 0x00000200 |
| #define SPI_OP_OUTPUT_SERVICE_FLAG 0x00000100 |
| #define SPI_OP_INPUT_FIFO_FULL 0x00000080 |
| #define SPI_OP_OUTPUT_FIFO_FULL 0x00000040 |
| #define SPI_OP_IP_FIFO_NOT_EMPTY 0x00000020 |
| #define SPI_OP_OP_FIFO_NOT_EMPTY 0x00000010 |
| #define SPI_OP_STATE_VALID 0x00000004 |
| #define SPI_OP_STATE 0x00000003 |
| |
| #define SPI_OP_STATE_CLEAR_BITS 0x2 |
| enum msm_spi_state { |
| SPI_OP_STATE_RESET = 0x00000000, |
| SPI_OP_STATE_RUN = 0x00000001, |
| SPI_OP_STATE_PAUSE = 0x00000003, |
| }; |
| |
| /* SPI_ERROR_FLAGS fields */ |
| #define SPI_ERR_OUTPUT_OVER_RUN_ERR 0x00000020 |
| #define SPI_ERR_INPUT_UNDER_RUN_ERR 0x00000010 |
| #define SPI_ERR_OUTPUT_UNDER_RUN_ERR 0x00000008 |
| #define SPI_ERR_INPUT_OVER_RUN_ERR 0x00000004 |
| #define SPI_ERR_CLK_OVER_RUN_ERR 0x00000002 |
| #define SPI_ERR_CLK_UNDER_RUN_ERR 0x00000001 |
| |
| /* We don't allow transactions larger than 4K-64 or 64K-64 due to |
| mx_input/output_cnt register size */ |
| #define SPI_MAX_TRANSFERS QSD_REG(0xFC0) QUP_REG(0xFC0) |
| #define SPI_MAX_LEN (SPI_MAX_TRANSFERS * dd->bytes_per_word) |
| |
| #define SPI_NUM_CHIPSELECTS 4 |
| #define SPI_SUPPORTED_MODES (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP) |
| |
| /* high speed mode is when bus rate is greater then 26MHz */ |
| #define SPI_HS_MIN_RATE (26000000) |
| |
| #define SPI_DELAY_THRESHOLD 1 |
| /* Default timeout is 10 milliseconds */ |
| #define SPI_DEFAULT_TIMEOUT 10 |
| /* 250 microseconds */ |
| #define SPI_TRYLOCK_DELAY 250 |
| |
| /* Data Mover burst size */ |
| #define DM_BURST_SIZE 16 |
| /* Data Mover commands should be aligned to 64 bit(8 bytes) */ |
| #define DM_BYTE_ALIGN 8 |
| |
| enum msm_spi_qup_version { |
| SPI_QUP_VERSION_NONE = 0x0, |
| SPI_QUP_VERSION_BFAM = 0x2, |
| }; |
| |
| enum msm_spi_pipe_direction { |
| SPI_BAM_CONSUMER_PIPE = 0x0, |
| SPI_BAM_PRODUCER_PIPE = 0x1, |
| }; |
| |
| #define SPI_BAM_MAX_DESC_NUM 32 |
| #define SPI_MAX_TRFR_BTWN_RESETS ((64 * 1024) - 16) /* 64KB - 16byte */ |
| |
| enum msm_spi_clk_path_vec_idx { |
| MSM_SPI_CLK_PATH_SUSPEND_VEC = 0, |
| MSM_SPI_CLK_PATH_RESUME_VEC = 1, |
| }; |
| #define MSM_SPI_CLK_PATH_AVRG_BW(dd) (dd->pdata->max_clock_speed * 8) |
| #define MSM_SPI_CLK_PATH_BRST_BW(dd) (dd->pdata->max_clock_speed * 8) |
| |
| static char const * const spi_rsrcs[] = { |
| "spi_clk", |
| "spi_miso", |
| "spi_mosi" |
| }; |
| |
| static char const * const spi_cs_rsrcs[] = { |
| "spi_cs", |
| "spi_cs1", |
| "spi_cs2", |
| "spi_cs3", |
| }; |
| |
| enum msm_spi_mode { |
| SPI_FIFO_MODE = 0x0, /* 00 */ |
| SPI_BLOCK_MODE = 0x1, /* 01 */ |
| SPI_DMOV_MODE = 0x2, /* 10 */ |
| SPI_BAM_MODE = 0x3, /* 11 */ |
| SPI_MODE_NONE = 0xFF, /* invalid value */ |
| }; |
| |
| /* Structure for SPI CS GPIOs */ |
| struct spi_cs_gpio { |
| int gpio_num; |
| bool valid; |
| }; |
| |
| /* Structures for Data Mover */ |
| struct spi_dmov_cmd { |
| dmov_box box; /* data aligned to max(dm_burst_size, block_size) |
| (<= fifo_size) */ |
| dmov_s single_pad; /* data unaligned to max(dm_burst_size, block_size) |
| padded to fit */ |
| dma_addr_t cmd_ptr; |
| }; |
| |
| static struct pm_qos_request qos_req_list; |
| |
| #ifdef CONFIG_DEBUG_FS |
| /* Used to create debugfs entries */ |
| static const struct { |
| const char *name; |
| mode_t mode; |
| int offset; |
| } debugfs_spi_regs[] = { |
| {"config", S_IRUGO | S_IWUSR, SPI_CONFIG}, |
| {"io_control", S_IRUGO | S_IWUSR, SPI_IO_CONTROL}, |
| {"io_modes", S_IRUGO | S_IWUSR, SPI_IO_MODES}, |
| {"sw_reset", S_IWUSR, SPI_SW_RESET}, |
| {"time_out_current", S_IRUGO, SPI_TIME_OUT_CURRENT}, |
| {"mx_output_count", S_IRUGO | S_IWUSR, SPI_MX_OUTPUT_COUNT}, |
| {"mx_output_cnt_current", S_IRUGO, SPI_MX_OUTPUT_CNT_CURRENT}, |
| {"mx_input_count", S_IRUGO | S_IWUSR, SPI_MX_INPUT_COUNT}, |
| {"mx_input_cnt_current", S_IRUGO, SPI_MX_INPUT_CNT_CURRENT}, |
| {"mx_read_count", S_IRUGO | S_IWUSR, SPI_MX_READ_COUNT}, |
| {"mx_read_cnt_current", S_IRUGO, SPI_MX_READ_CNT_CURRENT}, |
| {"operational", S_IRUGO | S_IWUSR, SPI_OPERATIONAL}, |
| {"error_flags", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS}, |
| {"error_flags_en", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS_EN}, |
| {"deassert_wait", S_IRUGO | S_IWUSR, SPI_DEASSERT_WAIT}, |
| {"output_debug", S_IRUGO, SPI_OUTPUT_DEBUG}, |
| {"input_debug", S_IRUGO, SPI_INPUT_DEBUG}, |
| {"test_ctrl", S_IRUGO | S_IWUSR, SPI_TEST_CTRL}, |
| {"output_fifo", S_IWUSR, SPI_OUTPUT_FIFO}, |
| {"input_fifo" , S_IRUSR, SPI_INPUT_FIFO}, |
| {"spi_state", S_IRUGO | S_IWUSR, SPI_STATE}, |
| #if defined(CONFIG_SPI_QSD) || defined(CONFIG_SPI_QSD_MODULE) |
| {"fifo_word_cnt", S_IRUGO, SPI_FIFO_WORD_CNT}, |
| #else |
| {"qup_config", S_IRUGO | S_IWUSR, QUP_CONFIG}, |
| {"qup_error_flags", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS}, |
| {"qup_error_flags_en", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS_EN}, |
| {"mx_write_cnt", S_IRUGO | S_IWUSR, QUP_MX_WRITE_COUNT}, |
| {"mx_write_cnt_current", S_IRUGO, QUP_MX_WRITE_CNT_CURRENT}, |
| {"output_fifo_word_cnt", S_IRUGO, SPI_OUTPUT_FIFO_WORD_CNT}, |
| {"input_fifo_word_cnt", S_IRUGO, SPI_INPUT_FIFO_WORD_CNT}, |
| #endif |
| }; |
| #endif |
| |
| /** |
| * qup_i2c_clk_path_vote: data to use bus scaling driver for clock path vote |
| * |
| * @client_hdl when zero, client is not registered with the bus scaling driver, |
| * and bus scaling functionality should not be used. When non zero, it |
| * is a bus scaling client id and may be used to vote for clock path. |
| * @reg_err when true, registration error was detected and an error message was |
| * logged. i2c will attempt to re-register but will log error only once. |
| * once registration succeed, the flag is set to false. |
| */ |
| struct qup_i2c_clk_path_vote { |
| u32 client_hdl; |
| struct msm_bus_scale_pdata *pdata; |
| bool reg_err; |
| }; |
| |
| struct msm_spi_bam_pipe { |
| struct sps_pipe *handle; |
| struct sps_connect config; |
| bool teardown_required; |
| }; |
| |
| struct msm_spi_bam { |
| void __iomem *base; |
| u32 phys_addr; |
| u32 handle; |
| u32 irq; |
| struct msm_spi_bam_pipe prod; |
| struct msm_spi_bam_pipe cons; |
| bool deregister_required; |
| }; |
| |
| struct msm_spi { |
| u8 *read_buf; |
| const u8 *write_buf; |
| void __iomem *base; |
| struct device *dev; |
| spinlock_t queue_lock; |
| struct mutex core_lock; |
| struct list_head queue; |
| struct workqueue_struct *workqueue; |
| struct work_struct work_data; |
| struct spi_message *cur_msg; |
| struct spi_transfer *cur_transfer; |
| struct completion transfer_complete; |
| struct clk *clk; /* core clock */ |
| struct clk *pclk; /* interface clock */ |
| struct qup_i2c_clk_path_vote clk_path_vote; |
| unsigned long mem_phys_addr; |
| size_t mem_size; |
| int input_fifo_size; |
| int output_fifo_size; |
| u32 rx_bytes_remaining; |
| u32 tx_bytes_remaining; |
| u32 clock_speed; |
| int irq_in; |
| int read_xfr_cnt; |
| int write_xfr_cnt; |
| int write_len; |
| int read_len; |
| #if defined(CONFIG_SPI_QSD) || defined(CONFIG_SPI_QSD_MODULE) |
| int irq_out; |
| int irq_err; |
| #endif |
| int bytes_per_word; |
| bool suspended; |
| bool transfer_pending; |
| wait_queue_head_t continue_suspend; |
| /* DMA data */ |
| enum msm_spi_mode mode; |
| bool use_dma; |
| int tx_dma_chan; |
| int tx_dma_crci; |
| int rx_dma_chan; |
| int rx_dma_crci; |
| int (*dma_init) (struct msm_spi *dd); |
| void (*dma_teardown) (struct msm_spi *dd); |
| struct msm_spi_bam bam; |
| /* Data Mover Commands */ |
| struct spi_dmov_cmd *tx_dmov_cmd; |
| struct spi_dmov_cmd *rx_dmov_cmd; |
| /* Physical address of the tx dmov box command */ |
| dma_addr_t tx_dmov_cmd_dma; |
| dma_addr_t rx_dmov_cmd_dma; |
| struct msm_dmov_cmd tx_hdr; |
| struct msm_dmov_cmd rx_hdr; |
| int input_block_size; |
| int output_block_size; |
| int input_burst_size; |
| int output_burst_size; |
| atomic_t rx_irq_called; |
| atomic_t tx_irq_called; |
| /* Used to pad messages unaligned to block size */ |
| u8 *tx_padding; |
| dma_addr_t tx_padding_dma; |
| u8 *rx_padding; |
| dma_addr_t rx_padding_dma; |
| u32 tx_unaligned_len; |
| u32 rx_unaligned_len; |
| /* DMA statistics */ |
| int stat_dmov_tx_err; |
| int stat_dmov_rx_err; |
| int stat_rx; |
| int stat_dmov_rx; |
| int stat_tx; |
| int stat_dmov_tx; |
| #ifdef CONFIG_DEBUG_FS |
| struct dentry *dent_spi; |
| struct dentry *debugfs_spi_regs[ARRAY_SIZE(debugfs_spi_regs)]; |
| #endif |
| struct msm_spi_platform_data *pdata; /* Platform data */ |
| /* Remote Spinlock Data */ |
| bool use_rlock; |
| remote_mutex_t r_lock; |
| uint32_t pm_lat; |
| /* When set indicates multiple transfers in a single message */ |
| bool multi_xfr; |
| bool done; |
| u32 cur_msg_len; |
| /* Used in FIFO mode to keep track of the transfer being processed */ |
| struct spi_transfer *cur_tx_transfer; |
| struct spi_transfer *cur_rx_transfer; |
| /* Temporary buffer used for WR-WR or WR-RD transfers */ |
| u8 *temp_buf; |
| /* GPIO pin numbers for SPI clk, miso and mosi */ |
| int spi_gpios[ARRAY_SIZE(spi_rsrcs)]; |
| /* SPI CS GPIOs for each slave */ |
| struct spi_cs_gpio cs_gpios[ARRAY_SIZE(spi_cs_rsrcs)]; |
| enum msm_spi_qup_version qup_ver; |
| int max_trfr_len; |
| }; |
| |
| /* Forward declaration */ |
| static irqreturn_t msm_spi_input_irq(int irq, void *dev_id); |
| static irqreturn_t msm_spi_output_irq(int irq, void *dev_id); |
| static irqreturn_t msm_spi_error_irq(int irq, void *dev_id); |
| static inline int msm_spi_set_state(struct msm_spi *dd, |
| enum msm_spi_state state); |
| static void msm_spi_write_word_to_fifo(struct msm_spi *dd); |
| static inline void msm_spi_write_rmn_to_fifo(struct msm_spi *dd); |
| static irqreturn_t msm_spi_qup_irq(int irq, void *dev_id); |
| |
| #if defined(CONFIG_SPI_QSD) || defined(CONFIG_SPI_QSD_MODULE) |
| static inline void msm_spi_disable_irqs(struct msm_spi *dd) |
| { |
| disable_irq(dd->irq_in); |
| disable_irq(dd->irq_out); |
| disable_irq(dd->irq_err); |
| } |
| |
| static inline void msm_spi_enable_irqs(struct msm_spi *dd) |
| { |
| enable_irq(dd->irq_in); |
| enable_irq(dd->irq_out); |
| enable_irq(dd->irq_err); |
| } |
| |
| static inline int msm_spi_request_irq(struct msm_spi *dd, |
| struct platform_device *pdev, |
| struct spi_master *master) |
| { |
| int rc; |
| |
| dd->irq_in = platform_get_irq(pdev, 0); |
| dd->irq_out = platform_get_irq(pdev, 1); |
| dd->irq_err = platform_get_irq(pdev, 2); |
| if ((dd->irq_in < 0) || (dd->irq_out < 0) || (dd->irq_err < 0)) |
| return -EINVAL; |
| |
| rc = devm_request_irq(dd->dev, dd->irq_in, msm_spi_input_irq, |
| IRQF_TRIGGER_RISING, pdev->name, dd); |
| if (rc) |
| goto error_irq; |
| |
| rc = devm_request_irq(dd->dev, dd->irq_out, msm_spi_output_irq, |
| IRQF_TRIGGER_RISING, pdev->name, dd); |
| if (rc) |
| goto error_irq; |
| |
| rc = devm_request_irq(dd->dev, dd->irq_err, msm_spi_error_irq, |
| IRQF_TRIGGER_RISING, pdev->name, master); |
| if (rc) |
| goto error_irq; |
| |
| error_irq: |
| return rc; |
| } |
| |
| static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err) {} |
| static inline void msm_spi_ack_clk_err(struct msm_spi *dd) {} |
| static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw) {} |
| |
| static inline int msm_spi_prepare_for_write(struct msm_spi *dd) { return 0; } |
| static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count) |
| { |
| msm_spi_write_word_to_fifo(dd); |
| } |
| static inline void msm_spi_set_write_count(struct msm_spi *dd, int val) {} |
| |
| static inline void msm_spi_complete(struct msm_spi *dd) |
| { |
| complete(&dd->transfer_complete); |
| } |
| |
| static inline void msm_spi_enable_error_flags(struct msm_spi *dd) |
| { |
| writel_relaxed(0x0000007B, dd->base + SPI_ERROR_FLAGS_EN); |
| } |
| |
| static inline void msm_spi_clear_error_flags(struct msm_spi *dd) |
| { |
| writel_relaxed(0x0000007F, dd->base + SPI_ERROR_FLAGS); |
| } |
| |
| #else |
| /* In QUP the same interrupt line is used for input, output and error*/ |
| static inline int msm_spi_request_irq(struct msm_spi *dd, |
| struct platform_device *pdev, |
| struct spi_master *master) |
| { |
| dd->irq_in = platform_get_irq(pdev, 0); |
| if (dd->irq_in < 0) |
| return -EINVAL; |
| |
| return devm_request_irq(dd->dev, dd->irq_in, msm_spi_qup_irq, |
| IRQF_TRIGGER_HIGH, pdev->name, dd); |
| } |
| |
| static inline void msm_spi_disable_irqs(struct msm_spi *dd) |
| { |
| disable_irq(dd->irq_in); |
| } |
| |
| static inline void msm_spi_enable_irqs(struct msm_spi *dd) |
| { |
| enable_irq(dd->irq_in); |
| } |
| |
| static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err) |
| { |
| *spi_err = readl_relaxed(dd->base + QUP_ERROR_FLAGS); |
| } |
| |
| static inline void msm_spi_ack_clk_err(struct msm_spi *dd) |
| { |
| writel_relaxed(QUP_ERR_MASK, dd->base + QUP_ERROR_FLAGS); |
| } |
| |
| static inline void |
| msm_spi_set_bpw_and_no_io_flags(struct msm_spi *dd, u32 *config, int n); |
| |
| /** |
| * msm_spi_set_qup_config: set QUP_CONFIG to no_input, no_output, and N bits |
| */ |
| static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw) |
| { |
| u32 qup_config = readl_relaxed(dd->base + QUP_CONFIG); |
| |
| msm_spi_set_bpw_and_no_io_flags(dd, &qup_config, bpw-1); |
| writel_relaxed(qup_config | QUP_CONFIG_SPI_MODE, dd->base + QUP_CONFIG); |
| } |
| |
| static inline int msm_spi_prepare_for_write(struct msm_spi *dd) |
| { |
| if (msm_spi_set_state(dd, SPI_OP_STATE_RUN)) |
| return -EINVAL; |
| if (msm_spi_set_state(dd, SPI_OP_STATE_PAUSE)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count) |
| { |
| if (read_count <= dd->input_fifo_size) |
| msm_spi_write_rmn_to_fifo(dd); |
| else |
| msm_spi_write_word_to_fifo(dd); |
| } |
| |
| static inline void msm_spi_set_write_count(struct msm_spi *dd, int val) |
| { |
| writel_relaxed(val, dd->base + QUP_MX_WRITE_COUNT); |
| } |
| |
| static inline void msm_spi_complete(struct msm_spi *dd) |
| { |
| dd->done = 1; |
| } |
| |
| static inline void msm_spi_enable_error_flags(struct msm_spi *dd) |
| { |
| if (dd->qup_ver == SPI_QUP_VERSION_BFAM) |
| writel_relaxed( |
| SPI_ERR_CLK_UNDER_RUN_ERR | SPI_ERR_CLK_OVER_RUN_ERR, |
| dd->base + SPI_ERROR_FLAGS_EN); |
| else |
| writel_relaxed(0x00000078, dd->base + SPI_ERROR_FLAGS_EN); |
| } |
| |
| static inline void msm_spi_clear_error_flags(struct msm_spi *dd) |
| { |
| if (dd->qup_ver == SPI_QUP_VERSION_BFAM) |
| writel_relaxed( |
| SPI_ERR_CLK_UNDER_RUN_ERR | SPI_ERR_CLK_OVER_RUN_ERR, |
| dd->base + SPI_ERROR_FLAGS); |
| else |
| writel_relaxed(0x0000007C, dd->base + SPI_ERROR_FLAGS); |
| } |
| |
| #endif |
| #endif |