Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 98f08f3ded09ae1faa600347bf9c1a752d4dfc05 / . / arch / arm / boot / dts / msm8610-camera-sensor-cdp-mtp.dtsi
blob: e133117b6049d10f7b4b1203e9d6081335249337 [file] [log] [blame]
Lokesh Kumar Aakulu25213502013-05-07 17:43:03 -0700[diff] [blame]1/*
2 * Copyright (c) 2013, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14&i2c {
15
16 led_flash0: qcom,led-flash@60 {
17 cell-index = <0>;
18 reg = <0x60>;
19 qcom,slave-id = <0x60 0x00 0x0011>;
20 compatible = "qcom,led-flash";
21 qcom,flash-name = "adp1600";
22 qcom,flash-type = <1>;
23 qcom,gpio-no-mux = <0>;
24 gpios = <&msmgpio 18 0>,
25 <&msmgpio 19 0>;
26 qcom,gpio-flash-en = <0>;
27 qcom,gpio-flash-now = <1>;
28 qcom,gpio-req-tbl-num = <0 1>;
29 qcom,gpio-req-tbl-flags = <0 0>;
30 qcom,gpio-req-tbl-label = "FLASH_EN",
31 "FLASH_NOW";
32 };
33
34 actuator0: qcom,actuator@6e {
35 cell-index = <3>;
36 reg = <0x6c>;
37 compatible = "qcom,actuator";
38 qcom,cci-master = <0>;
39 };
40
Wei Dingce0432e2013-09-10 09:44:57 +0800[diff] [blame]41 eeprom0: qcom,eeprom@6a {
42 cell-index = <0>;
43 reg = <0x6a 0x0>;
44 qcom,eeprom-name = "truly_cm7700";
45 compatible = "qcom,msm_eeprom";
46 qcom,slave-addr = <0x6c>;
47 qcom,num-blocks = <9>;
48 qcom,page0 = <1 0x0100 2 0x01 1 1>;
49 qcom,poll0 = <0 0x0 2 0 1 1>;
50 qcom,mem0 = <0 0x0 2 0 1 0>;
51 qcom,page1 = <1 0x3d84 2 0x8 1 1>;
52 qcom,pageen1 = <1 0x3d81 2 0x01 1 10>;
53 qcom,poll1 = <0 0x0 2 0 1 1>;
54 qcom,mem1 = <32 0x3d00 2 0 1 0>;
55 qcom,page2 = <1 0x3d84 2 0x9 1 1>;
56 qcom,pageen2 = <1 0x3d81 2 0x01 1 10>;
57 qcom,poll2 = <0 0x0 2 0 1 1>;
58 qcom,mem2 = <32 0x3d00 2 0 1 0>;
59 qcom,page3 = <1 0x3d84 2 0xa 1 1>;
60 qcom,pageen3 = <1 0x3d81 2 0x01 1 10>;
61 qcom,poll3 = <0 0x0 2 0 1 1>;
62 qcom,mem3 = <32 0x3d00 2 0 1 0>;
63 qcom,page4 = <1 0x3d84 2 0xb 1 1>;
64 qcom,pageen4 = <1 0x3d81 2 0x01 1 10>;
65 qcom,poll4 = <0 0x0 2 0 1 1>;
66 qcom,mem4 = <32 0x3d00 2 0 1 0>;
67 qcom,page5 = <1 0x3d84 2 0xc 1 1>;
68 qcom,pageen5 = <1 0x3d81 2 0x01 1 10>;
69 qcom,poll5 = <0 0x0 2 0 1 1>;
70 qcom,mem5 = <32 0x3d00 2 0 1 0>;
71 qcom,page6 = <1 0x3d84 2 0xd 1 1>;
72 qcom,pageen6 = <1 0x3d81 2 0x01 1 10>;
73 qcom,poll6 = <0 0x0 2 0 1 1>;
74 qcom,mem6 = <32 0x3d00 2 0 1 0>;
75 qcom,page7 = <1 0x3d84 2 0xe 1 1>;
76 qcom,pageen7 = <1 0x3d81 2 0x01 1 10>;
77 qcom,poll7 = <0 0x0 2 0 1 1>;
78 qcom,mem7 = <32 0x3d00 2 0 1 0>;
79 qcom,page8 = <1 0x3d84 2 0xf 1 1>;
80 qcom,pageen8 = <1 0x3d81 2 0x01 1 10>;
81 qcom,poll8 = <0 0x0 2 0 1 1>;
82 qcom,mem8 = <32 0x3d00 2 0 1 0>;
83
84 cam_vdig-supply = <&pm8110_l2>;
85 cam_vio-supply = <&pm8110_l14>;
86 qcom,cam-vreg-name = "cam_vdig", "cam_vio";
87 qcom,cam-vreg-type = <0 0 0 0>;
88 qcom,cam-vreg-min-voltage = <1200000 1800000>;
89 qcom,cam-vreg-max-voltage = <1200000 1800000>;
90 qcom,cam-vreg-op-mode = <200000 8000>;
91 qcom,gpio-no-mux = <0>;
92 gpios = <&msmgpio 13 0>,
93 <&msmgpio 21 0>,
94 <&msmgpio 20 0>;
95 qcom,gpio-reset = <1>;
96 qcom,gpio-standby = <2>;
97 qcom,gpio-req-tbl-num = <0 1 2>;
98 qcom,gpio-req-tbl-flags = <1 0 0>;
99 qcom,gpio-req-tbl-label = "CAMIF_MCLK",
100 "CAM_RESET1",
101 "CAM_STANDBY";
102 qcom,cam-power-seq-type = "sensor_vreg",
103 "sensor_vreg", "sensor_clk",
104 "sensor_gpio", "sensor_gpio";
105 qcom,cam-power-seq-val = "cam_vdig",
106 "cam_vio", "sensor_cam_mclk",
107 "sensor_gpio_reset",
108 "sensor_gpio_standby";
109 qcom,cam-power-seq-cfg-val = <1 1 24000000 1 1>;
110 qcom,cam-power-seq-delay = <1 1 5 5 10>;
111 };
112
Lokesh Kumar Aakulu25213502013-05-07 17:43:03 -0700[diff] [blame]113 qcom,camera@6f {
114 compatible = "qcom,ov8825";
115 reg = <0x6f>;
116 qcom,slave-id = <0x6c 0x300a 0x8825>;
117 qcom,csiphy-sd-index = <0>;
118 qcom,csid-sd-index = <0>;
119 qcom,actuator-src = <&actuator0>;
120 qcom,led-flash-src = <&led_flash0>;
Wei Dingce0432e2013-09-10 09:44:57 +0800[diff] [blame]121 qcom,eeprom-src = <&eeprom0>;
Lokesh Kumar Aakulu25213502013-05-07 17:43:03 -0700[diff] [blame]122 qcom,mount-angle = <90>;
123 qcom,sensor-name = "ov8825";
124 cam_vdig-supply = <&pm8110_l2>;
125 cam_vana-supply = <&pm8110_l19>;
126 cam_vio-supply = <&pm8110_l14>;
127 cam_vaf-supply = <&pm8110_l16>;
128 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
129 "cam_vaf";
130 qcom,cam-vreg-type = <0 0 0 0>;
131 qcom,cam-vreg-min-voltage = <1200000 1800000 2850000 3000000>;
132 qcom,cam-vreg-max-voltage = <1200000 1800000 2850000 3000000>;
133 qcom,cam-vreg-op-mode = <200000 8000 80000 100000>;
134 qcom,gpio-no-mux = <0>;
135 gpios = <&msmgpio 13 0>,
136 <&msmgpio 21 0>,
137 <&msmgpio 20 0>;
138 qcom,gpio-reset = <1>;
139 qcom,gpio-standby = <2>;
140 qcom,gpio-req-tbl-num = <0 1 2>;
141 qcom,gpio-req-tbl-flags = <1 0 0>;
142 qcom,gpio-req-tbl-label = "CAMIF_MCLK",
143 "CAM_RESET1",
144 "CAM_STANDBY";
145 qcom,csi-lane-assign = <0xe4>;
146 qcom,csi-lane-mask = <0x3>;
147 qcom,sensor-position = <0>;
148 qcom,sensor-mode = <1>;
149 qcom,cci-master = <0>;
150 };
151
152 qcom,camera@6d {
153 compatible = "qcom,ov9724";
154 reg = <0x6d>;
155 qcom,slave-id = <0x20 0x0 0x9724>;
156 qcom,csiphy-sd-index = <1>;
157 qcom,csid-sd-index = <0>;
158 qcom,mount-angle = <90>;
159 qcom,sensor-name = "ov9724";
160 cam_vdig-supply = <&pm8110_l4>;
161 cam_vana-supply = <&pm8110_l19>;
162 cam_vio-supply = <&pm8110_l14>;
163 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
164 qcom,cam-vreg-type = <0 1 0>;
165 qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
166 qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
167 qcom,cam-vreg-op-mode = <200000 0 80000>;
168 qcom,gpio-no-mux = <0>;
169 gpios = <&msmgpio 14 0>,
170 <&msmgpio 15 0>,
171 <&msmgpio 8 0>;
172 qcom,gpio-reset = <1>;
173 qcom,gpio-standby = <2>;
174 qcom,gpio-req-tbl-num = <0 1 2>;
175 qcom,gpio-req-tbl-flags = <1 0 0>;
176 qcom,gpio-req-tbl-label = "CAMIF_MCLK",
177 "CAM_RESET",
178 "CAM_STANDBY";
179 qcom,gpio-set-tbl-num = <1 1>;
180 qcom,gpio-set-tbl-flags = <0 2>;
181 qcom,gpio-set-tbl-delay = <1000 4000>;
182 qcom,csi-lane-assign = <0xe4>;
183 qcom,csi-lane-mask = <0x1>;
184 qcom,sensor-position = <1>;
185 qcom,sensor-mode = <1>;
186 qcom,cci-master = <0>;
187 status = "ok";
188 };
Ju Hef437ef82013-06-07 15:50:04 -0700[diff] [blame]189
190 qcom,camera@78 {
191 compatible = "qcom,sp1628";
192 reg = <0x78>;
193 qcom,slave-id = <0x78 0x0 0x1628>;
194 qcom,csiphy-sd-index = <1>;
195 qcom,csid-sd-index = <1>;
196 qcom,mount-angle = <90>;
197 qcom,sensor-name = "sp1628";
198 cam_vdig-supply = <&pm8110_l2>;
199 cam_vana-supply = <&pm8110_l19>;
200 cam_vio-supply = <&pm8110_l14>;
201 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
202 qcom,cam-vreg-type = <0 0 0>;
203 qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;
204 qcom,cam-vreg-max-voltage = <1200000 1800000 2850000>;
205 qcom,cam-vreg-op-mode = <200000 80000 80000>;
206 qcom,gpio-no-mux = <0>;
207 gpios = <&msmgpio 14 0>,
208 <&msmgpio 15 0>,
209 <&msmgpio 8 0>;
210 qcom,gpio-reset = <1>;
211 qcom,gpio-standby = <2>;
212 qcom,gpio-req-tbl-num = <0 1 2>;
213 qcom,gpio-req-tbl-flags = <1 0 0>;
214 qcom,gpio-req-tbl-label = "CAMIF_MCLK",
215 "CAM_RESET",
216 "CAM_STANDBY";
217 qcom,gpio-set-tbl-num = <1 1>;
218 qcom,gpio-set-tbl-flags = <0 2>;
219 qcom,gpio-set-tbl-delay = <1000 4000>;
220 qcom,csi-lane-assign = <0xe4>;
221 qcom,csi-lane-mask = <0x3>;
222 qcom,sensor-position = <1>;
223 qcom,sensor-mode = <1>;
224 qcom,cci-master = <0>;
225 };
226
Lokesh Kumar Aakulu25213502013-05-07 17:43:03 -0700[diff] [blame]227};