blob: 5d3a1478004b8a4448ccbf2c4a47030609951872 [file] [log] [blame]
David Brownella30d46c2008-10-20 23:46:28 +02001/*
2 * twl4030-irq.c - TWL4030/TPS659x0 irq support
3 *
4 * Copyright (C) 2005-2006 Texas Instruments, Inc.
5 *
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
8 *
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
11 *
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 */
29
30#include <linux/init.h>
31#include <linux/interrupt.h>
32#include <linux/irq.h>
33#include <linux/kthread.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090034#include <linux/slab.h>
David Brownella30d46c2008-10-20 23:46:28 +020035
Santosh Shilimkarb07682b2009-12-13 20:05:51 +010036#include <linux/i2c/twl.h>
David Brownella30d46c2008-10-20 23:46:28 +020037
G, Manjunath Kondaiahb0b4a7c2010-10-19 11:02:48 +020038#include "twl-core.h"
David Brownella30d46c2008-10-20 23:46:28 +020039
40/*
41 * TWL4030 IRQ handling has two stages in hardware, and thus in software.
42 * The Primary Interrupt Handler (PIH) stage exposes status bits saying
43 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
44 * SIH modules are more traditional IRQ components, which support per-IRQ
45 * enable/disable and trigger controls; they do most of the work.
46 *
47 * These chips are designed to support IRQ handling from two different
48 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status
49 * and mask registers in the PIH and SIH modules.
50 *
51 * We set up IRQs starting at a platform-specified base, always starting
52 * with PIH and the SIH for PWR_INT and then usually adding GPIO:
53 * base + 0 .. base + 7 PIH
54 * base + 8 .. base + 15 SIH for PWR_INT
55 * base + 16 .. base + 33 SIH for GPIO
56 */
57
58/* PIH register offsets */
59#define REG_PIH_ISR_P1 0x01
60#define REG_PIH_ISR_P2 0x02
61#define REG_PIH_SIR 0x03 /* for testing */
62
63
64/* Linux could (eventually) use either IRQ line */
65static int irq_line;
66
67struct sih {
68 char name[8];
69 u8 module; /* module id */
70 u8 control_offset; /* for SIH_CTRL */
71 bool set_cor;
72
73 u8 bits; /* valid in isr/imr */
74 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */
75
76 u8 edr_offset;
77 u8 bytes_edr; /* bytelen of EDR */
78
Ilkka Koskinen1920a612009-11-10 17:26:15 +020079 u8 irq_lines; /* number of supported irq lines */
80
David Brownella30d46c2008-10-20 23:46:28 +020081 /* SIR ignored -- set interrupt, for testing only */
Thomas Gleixner35a27e82010-10-01 16:35:59 +020082 struct sih_irq_data {
David Brownella30d46c2008-10-20 23:46:28 +020083 u8 isr_offset;
84 u8 imr_offset;
85 } mask[2];
86 /* + 2 bytes padding */
87};
88
Ilkka Koskinen1920a612009-11-10 17:26:15 +020089static const struct sih *sih_modules;
90static int nr_sih_modules;
91
David Brownella30d46c2008-10-20 23:46:28 +020092#define SIH_INITIALIZER(modname, nbits) \
93 .module = TWL4030_MODULE_ ## modname, \
94 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
95 .bits = nbits, \
96 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
97 .edr_offset = TWL4030_ ## modname ## _EDR, \
98 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
Ilkka Koskinen1920a612009-11-10 17:26:15 +020099 .irq_lines = 2, \
David Brownella30d46c2008-10-20 23:46:28 +0200100 .mask = { { \
101 .isr_offset = TWL4030_ ## modname ## _ISR1, \
102 .imr_offset = TWL4030_ ## modname ## _IMR1, \
103 }, \
104 { \
105 .isr_offset = TWL4030_ ## modname ## _ISR2, \
106 .imr_offset = TWL4030_ ## modname ## _IMR2, \
107 }, },
108
109/* register naming policies are inconsistent ... */
110#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
111#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
112#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
113
114
115/* Order in this table matches order in PIH_ISR. That is,
116 * BIT(n) in PIH_ISR is sih_modules[n].
117 */
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200118/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
119static const struct sih sih_modules_twl4030[6] = {
David Brownella30d46c2008-10-20 23:46:28 +0200120 [0] = {
121 .name = "gpio",
122 .module = TWL4030_MODULE_GPIO,
123 .control_offset = REG_GPIO_SIH_CTRL,
124 .set_cor = true,
125 .bits = TWL4030_GPIO_MAX,
126 .bytes_ixr = 3,
127 /* Note: *all* of these IRQs default to no-trigger */
128 .edr_offset = REG_GPIO_EDR1,
129 .bytes_edr = 5,
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200130 .irq_lines = 2,
David Brownella30d46c2008-10-20 23:46:28 +0200131 .mask = { {
132 .isr_offset = REG_GPIO_ISR1A,
133 .imr_offset = REG_GPIO_IMR1A,
134 }, {
135 .isr_offset = REG_GPIO_ISR1B,
136 .imr_offset = REG_GPIO_IMR1B,
137 }, },
138 },
139 [1] = {
140 .name = "keypad",
141 .set_cor = true,
142 SIH_INITIALIZER(KEYPAD_KEYP, 4)
143 },
144 [2] = {
145 .name = "bci",
146 .module = TWL4030_MODULE_INTERRUPTS,
147 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL,
Grazvydas Ignotas8e52e272010-09-28 16:22:19 +0300148 .set_cor = true,
David Brownella30d46c2008-10-20 23:46:28 +0200149 .bits = 12,
150 .bytes_ixr = 2,
151 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
152 /* Note: most of these IRQs default to no-trigger */
153 .bytes_edr = 3,
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200154 .irq_lines = 2,
David Brownella30d46c2008-10-20 23:46:28 +0200155 .mask = { {
156 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
157 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
158 }, {
159 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B,
160 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B,
161 }, },
162 },
163 [3] = {
164 .name = "madc",
165 SIH_INITIALIZER(MADC, 4)
166 },
167 [4] = {
168 /* USB doesn't use the same SIH organization */
169 .name = "usb",
170 },
171 [5] = {
172 .name = "power",
173 .set_cor = true,
174 SIH_INITIALIZER(INT_PWR, 8)
175 },
176 /* there are no SIH modules #6 or #7 ... */
177};
178
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200179static const struct sih sih_modules_twl5031[8] = {
180 [0] = {
181 .name = "gpio",
182 .module = TWL4030_MODULE_GPIO,
183 .control_offset = REG_GPIO_SIH_CTRL,
184 .set_cor = true,
185 .bits = TWL4030_GPIO_MAX,
186 .bytes_ixr = 3,
187 /* Note: *all* of these IRQs default to no-trigger */
188 .edr_offset = REG_GPIO_EDR1,
189 .bytes_edr = 5,
190 .irq_lines = 2,
191 .mask = { {
192 .isr_offset = REG_GPIO_ISR1A,
193 .imr_offset = REG_GPIO_IMR1A,
194 }, {
195 .isr_offset = REG_GPIO_ISR1B,
196 .imr_offset = REG_GPIO_IMR1B,
197 }, },
198 },
199 [1] = {
200 .name = "keypad",
201 .set_cor = true,
202 SIH_INITIALIZER(KEYPAD_KEYP, 4)
203 },
204 [2] = {
205 .name = "bci",
206 .module = TWL5031_MODULE_INTERRUPTS,
207 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
208 .bits = 7,
209 .bytes_ixr = 1,
210 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
211 /* Note: most of these IRQs default to no-trigger */
212 .bytes_edr = 2,
213 .irq_lines = 2,
214 .mask = { {
215 .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
216 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
217 }, {
218 .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
219 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
220 }, },
221 },
222 [3] = {
223 .name = "madc",
224 SIH_INITIALIZER(MADC, 4)
225 },
226 [4] = {
227 /* USB doesn't use the same SIH organization */
228 .name = "usb",
229 },
230 [5] = {
231 .name = "power",
232 .set_cor = true,
233 SIH_INITIALIZER(INT_PWR, 8)
234 },
235 [6] = {
236 /*
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300237 * ECI/DBI doesn't use the same SIH organization.
238 * For example, it supports only one interrupt output line.
239 * That is, the interrupts are seen on both INT1 and INT2 lines.
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200240 */
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300241 .name = "eci_dbi",
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200242 .module = TWL5031_MODULE_ACCESSORY,
243 .bits = 9,
244 .bytes_ixr = 2,
245 .irq_lines = 1,
246 .mask = { {
247 .isr_offset = TWL5031_ACIIDR_LSB,
248 .imr_offset = TWL5031_ACIIMR_LSB,
249 }, },
250
251 },
252 [7] = {
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300253 /* Audio accessory */
254 .name = "audio",
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200255 .module = TWL5031_MODULE_ACCESSORY,
256 .control_offset = TWL5031_ACCSIHCTRL,
257 .bits = 2,
258 .bytes_ixr = 1,
259 .edr_offset = TWL5031_ACCEDR1,
260 /* Note: most of these IRQs default to no-trigger */
261 .bytes_edr = 1,
262 .irq_lines = 2,
263 .mask = { {
264 .isr_offset = TWL5031_ACCISR1,
265 .imr_offset = TWL5031_ACCIMR1,
266 }, {
267 .isr_offset = TWL5031_ACCISR2,
268 .imr_offset = TWL5031_ACCIMR2,
269 }, },
270 },
271};
272
David Brownella30d46c2008-10-20 23:46:28 +0200273#undef TWL4030_MODULE_KEYPAD_KEYP
274#undef TWL4030_MODULE_INT_PWR
275#undef TWL4030_INT_PWR_EDR
276
277/*----------------------------------------------------------------------*/
278
279static unsigned twl4030_irq_base;
280
281static struct completion irq_event;
282
283/*
284 * This thread processes interrupts reported by the Primary Interrupt Handler.
285 */
286static int twl4030_irq_thread(void *data)
287{
288 long irq = (long)data;
David Brownella30d46c2008-10-20 23:46:28 +0200289 static unsigned i2c_errors;
Tobias Klauser3446d4b2009-02-17 10:11:42 +0100290 static const unsigned max_i2c_errors = 100;
David Brownella30d46c2008-10-20 23:46:28 +0200291
Samuel Ortiz94964f92008-12-18 11:38:02 +0100292
David Brownella30d46c2008-10-20 23:46:28 +0200293 current->flags |= PF_NOFREEZE;
294
295 while (!kthread_should_stop()) {
296 int ret;
297 int module_irq;
298 u8 pih_isr;
299
300 /* Wait for IRQ, then read PIH irq status (also blocking) */
301 wait_for_completion_interruptible(&irq_event);
302
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100303 ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
David Brownella30d46c2008-10-20 23:46:28 +0200304 REG_PIH_ISR_P1);
305 if (ret) {
306 pr_warning("twl4030: I2C error %d reading PIH ISR\n",
307 ret);
308 if (++i2c_errors >= max_i2c_errors) {
309 printk(KERN_ERR "Maximum I2C error count"
310 " exceeded. Terminating %s.\n",
311 __func__);
312 break;
313 }
314 complete(&irq_event);
315 continue;
316 }
317
318 /* these handlers deal with the relevant SIH irq status */
319 local_irq_disable();
320 for (module_irq = twl4030_irq_base;
321 pih_isr;
322 pih_isr >>= 1, module_irq++) {
323 if (pih_isr & 0x1) {
Samuel Ortiz94964f92008-12-18 11:38:02 +0100324 struct irq_desc *d = irq_to_desc(module_irq);
325
326 if (!d) {
327 pr_err("twl4030: Invalid SIH IRQ: %d\n",
328 module_irq);
329 return -EINVAL;
330 }
David Brownella30d46c2008-10-20 23:46:28 +0200331
332 /* These can't be masked ... always warn
333 * if we get any surprises.
334 */
335 if (d->status & IRQ_DISABLED)
336 note_interrupt(module_irq, d,
337 IRQ_NONE);
338 else
339 d->handle_irq(module_irq, d);
340 }
341 }
342 local_irq_enable();
343
Russell King1cef8e42009-07-27 11:30:48 +0530344 enable_irq(irq);
David Brownella30d46c2008-10-20 23:46:28 +0200345 }
346
347 return 0;
348}
349
350/*
351 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
352 * This is a chained interrupt, so there is no desc->action method for it.
353 * Now we need to query the interrupt controller in the twl4030 to determine
354 * which module is generating the interrupt request. However, we can't do i2c
355 * transactions in interrupt context, so we must defer that work to a kernel
356 * thread. All we do here is acknowledge and mask the interrupt and wakeup
357 * the kernel thread.
358 */
Russell King1cef8e42009-07-27 11:30:48 +0530359static irqreturn_t handle_twl4030_pih(int irq, void *devid)
David Brownella30d46c2008-10-20 23:46:28 +0200360{
361 /* Acknowledge, clear *AND* mask the interrupt... */
Russell King1cef8e42009-07-27 11:30:48 +0530362 disable_irq_nosync(irq);
363 complete(devid);
364 return IRQ_HANDLED;
David Brownella30d46c2008-10-20 23:46:28 +0200365}
David Brownella30d46c2008-10-20 23:46:28 +0200366/*----------------------------------------------------------------------*/
367
368/*
369 * twl4030_init_sih_modules() ... start from a known state where no
370 * IRQs will be coming in, and where we can quickly enable them then
371 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL.
372 *
373 * NOTE: we don't touch EDR registers here; they stay with hardware
374 * defaults or whatever the last value was. Note that when both EDR
375 * bits for an IRQ are clear, that's as if its IMR bit is set...
376 */
377static int twl4030_init_sih_modules(unsigned line)
378{
379 const struct sih *sih;
380 u8 buf[4];
381 int i;
382 int status;
383
384 /* line 0 == int1_n signal; line 1 == int2_n signal */
385 if (line > 1)
386 return -EINVAL;
387
388 irq_line = line;
389
390 /* disable all interrupts on our line */
391 memset(buf, 0xff, sizeof buf);
392 sih = sih_modules;
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200393 for (i = 0; i < nr_sih_modules; i++, sih++) {
David Brownella30d46c2008-10-20 23:46:28 +0200394
395 /* skip USB -- it's funky */
396 if (!sih->bytes_ixr)
397 continue;
398
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200399 /* Not all the SIH modules support multiple interrupt lines */
400 if (sih->irq_lines <= line)
401 continue;
402
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100403 status = twl_i2c_write(sih->module, buf,
David Brownella30d46c2008-10-20 23:46:28 +0200404 sih->mask[line].imr_offset, sih->bytes_ixr);
405 if (status < 0)
406 pr_err("twl4030: err %d initializing %s %s\n",
407 status, sih->name, "IMR");
408
409 /* Maybe disable "exclusive" mode; buffer second pending irq;
410 * set Clear-On-Read (COR) bit.
411 *
412 * NOTE that sometimes COR polarity is documented as being
Grazvydas Ignotas8e52e272010-09-28 16:22:19 +0300413 * inverted: for MADC, COR=1 means "clear on write".
David Brownella30d46c2008-10-20 23:46:28 +0200414 * And for PWR_INT it's not documented...
415 */
416 if (sih->set_cor) {
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100417 status = twl_i2c_write_u8(sih->module,
David Brownella30d46c2008-10-20 23:46:28 +0200418 TWL4030_SIH_CTRL_COR_MASK,
419 sih->control_offset);
420 if (status < 0)
421 pr_err("twl4030: err %d initializing %s %s\n",
422 status, sih->name, "SIH_CTRL");
423 }
424 }
425
426 sih = sih_modules;
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200427 for (i = 0; i < nr_sih_modules; i++, sih++) {
David Brownella30d46c2008-10-20 23:46:28 +0200428 u8 rxbuf[4];
429 int j;
430
431 /* skip USB */
432 if (!sih->bytes_ixr)
433 continue;
434
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200435 /* Not all the SIH modules support multiple interrupt lines */
436 if (sih->irq_lines <= line)
437 continue;
438
David Brownella30d46c2008-10-20 23:46:28 +0200439 /* Clear pending interrupt status. Either the read was
440 * enough, or we need to write those bits. Repeat, in
441 * case an IRQ is pending (PENDDIS=0) ... that's not
442 * uncommon with PWR_INT.PWRON.
443 */
444 for (j = 0; j < 2; j++) {
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100445 status = twl_i2c_read(sih->module, rxbuf,
David Brownella30d46c2008-10-20 23:46:28 +0200446 sih->mask[line].isr_offset, sih->bytes_ixr);
447 if (status < 0)
448 pr_err("twl4030: err %d initializing %s %s\n",
449 status, sih->name, "ISR");
450
451 if (!sih->set_cor)
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100452 status = twl_i2c_write(sih->module, buf,
David Brownella30d46c2008-10-20 23:46:28 +0200453 sih->mask[line].isr_offset,
454 sih->bytes_ixr);
455 /* else COR=1 means read sufficed.
456 * (for most SIH modules...)
457 */
458 }
459 }
460
461 return 0;
462}
463
464static inline void activate_irq(int irq)
465{
466#ifdef CONFIG_ARM
467 /* ARM requires an extra step to clear IRQ_NOREQUEST, which it
468 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
469 */
470 set_irq_flags(irq, IRQF_VALID);
471#else
472 /* same effect on other architectures */
473 set_irq_noprobe(irq);
474#endif
475}
476
477/*----------------------------------------------------------------------*/
478
479static DEFINE_SPINLOCK(sih_agent_lock);
480
481static struct workqueue_struct *wq;
482
483struct sih_agent {
484 int irq_base;
485 const struct sih *sih;
486
487 u32 imr;
488 bool imr_change_pending;
489 struct work_struct mask_work;
490
491 u32 edge_change;
492 struct work_struct edge_work;
493};
494
495static void twl4030_sih_do_mask(struct work_struct *work)
496{
497 struct sih_agent *agent;
498 const struct sih *sih;
499 union {
500 u8 bytes[4];
501 u32 word;
502 } imr;
503 int status;
504
505 agent = container_of(work, struct sih_agent, mask_work);
506
507 /* see what work we have */
508 spin_lock_irq(&sih_agent_lock);
509 if (agent->imr_change_pending) {
510 sih = agent->sih;
511 /* byte[0] gets overwritten as we write ... */
512 imr.word = cpu_to_le32(agent->imr << 8);
513 agent->imr_change_pending = false;
514 } else
515 sih = NULL;
516 spin_unlock_irq(&sih_agent_lock);
517 if (!sih)
518 return;
519
520 /* write the whole mask ... simpler than subsetting it */
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100521 status = twl_i2c_write(sih->module, imr.bytes,
David Brownella30d46c2008-10-20 23:46:28 +0200522 sih->mask[irq_line].imr_offset, sih->bytes_ixr);
523 if (status)
524 pr_err("twl4030: %s, %s --> %d\n", __func__,
525 "write", status);
526}
527
528static void twl4030_sih_do_edge(struct work_struct *work)
529{
530 struct sih_agent *agent;
531 const struct sih *sih;
532 u8 bytes[6];
533 u32 edge_change;
534 int status;
535
536 agent = container_of(work, struct sih_agent, edge_work);
537
538 /* see what work we have */
539 spin_lock_irq(&sih_agent_lock);
540 edge_change = agent->edge_change;
Joe Perchesdf10d642009-06-28 09:26:30 -0700541 agent->edge_change = 0;
David Brownella30d46c2008-10-20 23:46:28 +0200542 sih = edge_change ? agent->sih : NULL;
543 spin_unlock_irq(&sih_agent_lock);
544 if (!sih)
545 return;
546
547 /* Read, reserving first byte for write scratch. Yes, this
548 * could be cached for some speedup ... but be careful about
549 * any processor on the other IRQ line, EDR registers are
550 * shared.
551 */
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100552 status = twl_i2c_read(sih->module, bytes + 1,
David Brownella30d46c2008-10-20 23:46:28 +0200553 sih->edr_offset, sih->bytes_edr);
554 if (status) {
555 pr_err("twl4030: %s, %s --> %d\n", __func__,
556 "read", status);
557 return;
558 }
559
560 /* Modify only the bits we know must change */
561 while (edge_change) {
562 int i = fls(edge_change) - 1;
Samuel Ortiz94964f92008-12-18 11:38:02 +0100563 struct irq_desc *d = irq_to_desc(i + agent->irq_base);
David Brownella30d46c2008-10-20 23:46:28 +0200564 int byte = 1 + (i >> 2);
565 int off = (i & 0x3) * 2;
566
Samuel Ortiz94964f92008-12-18 11:38:02 +0100567 if (!d) {
568 pr_err("twl4030: Invalid IRQ: %d\n",
569 i + agent->irq_base);
570 return;
571 }
572
David Brownella30d46c2008-10-20 23:46:28 +0200573 bytes[byte] &= ~(0x03 << off);
574
Linus Torvaldscd6e1252009-12-31 17:26:05 -0800575 raw_spin_lock_irq(&d->lock);
David Brownella30d46c2008-10-20 23:46:28 +0200576 if (d->status & IRQ_TYPE_EDGE_RISING)
577 bytes[byte] |= BIT(off + 1);
578 if (d->status & IRQ_TYPE_EDGE_FALLING)
579 bytes[byte] |= BIT(off + 0);
Linus Torvaldscd6e1252009-12-31 17:26:05 -0800580 raw_spin_unlock_irq(&d->lock);
David Brownella30d46c2008-10-20 23:46:28 +0200581
582 edge_change &= ~BIT(i);
583 }
584
585 /* Write */
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100586 status = twl_i2c_write(sih->module, bytes,
David Brownella30d46c2008-10-20 23:46:28 +0200587 sih->edr_offset, sih->bytes_edr);
588 if (status)
589 pr_err("twl4030: %s, %s --> %d\n", __func__,
590 "write", status);
591}
592
593/*----------------------------------------------------------------------*/
594
595/*
596 * All irq_chip methods get issued from code holding irq_desc[irq].lock,
597 * which can't perform the underlying I2C operations (because they sleep).
598 * So we must hand them off to a thread (workqueue) and cope with asynch
599 * completion, potentially including some re-ordering, of these requests.
600 */
601
602static void twl4030_sih_mask(unsigned irq)
603{
604 struct sih_agent *sih = get_irq_chip_data(irq);
605 unsigned long flags;
606
607 spin_lock_irqsave(&sih_agent_lock, flags);
608 sih->imr |= BIT(irq - sih->irq_base);
609 sih->imr_change_pending = true;
610 queue_work(wq, &sih->mask_work);
611 spin_unlock_irqrestore(&sih_agent_lock, flags);
612}
613
614static void twl4030_sih_unmask(unsigned irq)
615{
616 struct sih_agent *sih = get_irq_chip_data(irq);
617 unsigned long flags;
618
619 spin_lock_irqsave(&sih_agent_lock, flags);
620 sih->imr &= ~BIT(irq - sih->irq_base);
621 sih->imr_change_pending = true;
622 queue_work(wq, &sih->mask_work);
623 spin_unlock_irqrestore(&sih_agent_lock, flags);
624}
625
626static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
627{
628 struct sih_agent *sih = get_irq_chip_data(irq);
Samuel Ortiz94964f92008-12-18 11:38:02 +0100629 struct irq_desc *desc = irq_to_desc(irq);
David Brownella30d46c2008-10-20 23:46:28 +0200630 unsigned long flags;
631
Samuel Ortiz94964f92008-12-18 11:38:02 +0100632 if (!desc) {
633 pr_err("twl4030: Invalid IRQ: %d\n", irq);
634 return -EINVAL;
635 }
636
David Brownella30d46c2008-10-20 23:46:28 +0200637 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
638 return -EINVAL;
639
640 spin_lock_irqsave(&sih_agent_lock, flags);
641 if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) {
642 desc->status &= ~IRQ_TYPE_SENSE_MASK;
643 desc->status |= trigger;
644 sih->edge_change |= BIT(irq - sih->irq_base);
645 queue_work(wq, &sih->edge_work);
646 }
647 spin_unlock_irqrestore(&sih_agent_lock, flags);
648 return 0;
649}
650
651static struct irq_chip twl4030_sih_irq_chip = {
652 .name = "twl4030",
653 .mask = twl4030_sih_mask,
654 .unmask = twl4030_sih_unmask,
655 .set_type = twl4030_sih_set_type,
656};
657
658/*----------------------------------------------------------------------*/
659
660static inline int sih_read_isr(const struct sih *sih)
661{
662 int status;
663 union {
664 u8 bytes[4];
665 u32 word;
666 } isr;
667
668 /* FIXME need retry-on-error ... */
669
670 isr.word = 0;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100671 status = twl_i2c_read(sih->module, isr.bytes,
David Brownella30d46c2008-10-20 23:46:28 +0200672 sih->mask[irq_line].isr_offset, sih->bytes_ixr);
673
674 return (status < 0) ? status : le32_to_cpu(isr.word);
675}
676
677/*
678 * Generic handler for SIH interrupts ... we "know" this is called
679 * in task context, with IRQs enabled.
680 */
681static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
682{
683 struct sih_agent *agent = get_irq_data(irq);
684 const struct sih *sih = agent->sih;
685 int isr;
686
687 /* reading ISR acks the IRQs, using clear-on-read mode */
688 local_irq_enable();
689 isr = sih_read_isr(sih);
690 local_irq_disable();
691
692 if (isr < 0) {
693 pr_err("twl4030: %s SIH, read ISR error %d\n",
694 sih->name, isr);
695 /* REVISIT: recover; eventually mask it all, etc */
696 return;
697 }
698
699 while (isr) {
700 irq = fls(isr);
701 irq--;
702 isr &= ~BIT(irq);
703
704 if (irq < sih->bits)
705 generic_handle_irq(agent->irq_base + irq);
706 else
707 pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
708 sih->name, irq);
709 }
710}
711
712static unsigned twl4030_irq_next;
713
714/* returns the first IRQ used by this SIH bank,
715 * or negative errno
716 */
717int twl4030_sih_setup(int module)
718{
719 int sih_mod;
720 const struct sih *sih = NULL;
721 struct sih_agent *agent;
722 int i, irq;
723 int status = -EINVAL;
724 unsigned irq_base = twl4030_irq_next;
725
726 /* only support modules with standard clear-on-read for now */
727 for (sih_mod = 0, sih = sih_modules;
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200728 sih_mod < nr_sih_modules;
David Brownella30d46c2008-10-20 23:46:28 +0200729 sih_mod++, sih++) {
730 if (sih->module == module && sih->set_cor) {
731 if (!WARN((irq_base + sih->bits) > NR_IRQS,
732 "irq %d for %s too big\n",
733 irq_base + sih->bits,
734 sih->name))
735 status = 0;
736 break;
737 }
738 }
739 if (status < 0)
740 return status;
741
742 agent = kzalloc(sizeof *agent, GFP_KERNEL);
743 if (!agent)
744 return -ENOMEM;
745
746 status = 0;
747
748 agent->irq_base = irq_base;
749 agent->sih = sih;
750 agent->imr = ~0;
751 INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
752 INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
753
754 for (i = 0; i < sih->bits; i++) {
755 irq = irq_base + i;
756
757 set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip,
758 handle_edge_irq);
759 set_irq_chip_data(irq, agent);
760 activate_irq(irq);
761 }
762
763 status = irq_base;
764 twl4030_irq_next += i;
765
766 /* replace generic PIH handler (handle_simple_irq) */
767 irq = sih_mod + twl4030_irq_base;
768 set_irq_data(irq, agent);
769 set_irq_chained_handler(irq, handle_twl4030_sih);
770
771 pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
772 irq, irq_base, twl4030_irq_next - 1);
773
774 return status;
775}
776
777/* FIXME need a call to reverse twl4030_sih_setup() ... */
778
779
780/*----------------------------------------------------------------------*/
781
782/* FIXME pass in which interrupt line we'll use ... */
783#define twl_irq_line 0
784
Balaji T Ke8deb282009-12-14 00:25:31 +0100785int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
David Brownella30d46c2008-10-20 23:46:28 +0200786{
787 static struct irq_chip twl4030_irq_chip;
788
789 int status;
790 int i;
791 struct task_struct *task;
792
793 /*
794 * Mask and clear all TWL4030 interrupts since initially we do
795 * not have any TWL4030 module interrupt handlers present
796 */
797 status = twl4030_init_sih_modules(twl_irq_line);
798 if (status < 0)
799 return status;
800
801 wq = create_singlethread_workqueue("twl4030-irqchip");
802 if (!wq) {
803 pr_err("twl4030: workqueue FAIL\n");
804 return -ESRCH;
805 }
806
807 twl4030_irq_base = irq_base;
808
809 /* install an irq handler for each of the SIH modules;
810 * clone dummy irq_chip since PIH can't *do* anything
811 */
812 twl4030_irq_chip = dummy_irq_chip;
813 twl4030_irq_chip.name = "twl4030";
814
Thomas Gleixnerfe212212010-10-08 15:33:01 +0200815 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack;
David Brownella30d46c2008-10-20 23:46:28 +0200816
817 for (i = irq_base; i < irq_end; i++) {
818 set_irq_chip_and_handler(i, &twl4030_irq_chip,
819 handle_simple_irq);
820 activate_irq(i);
821 }
822 twl4030_irq_next = i;
823 pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
824 irq_num, irq_base, twl4030_irq_next - 1);
825
826 /* ... and the PWR_INT module ... */
827 status = twl4030_sih_setup(TWL4030_MODULE_INT);
828 if (status < 0) {
829 pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
830 goto fail;
831 }
832
833 /* install an irq handler to demultiplex the TWL4030 interrupt */
Russell King1cef8e42009-07-27 11:30:48 +0530834
835
836 init_completion(&irq_event);
837
838 status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
839 "TWL4030-PIH", &irq_event);
840 if (status < 0) {
841 pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
842 goto fail_rqirq;
David Brownella30d46c2008-10-20 23:46:28 +0200843 }
844
Alan Cox89f5f9f2009-11-17 15:48:47 +0000845 task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
846 "twl4030-irq");
Russell King1cef8e42009-07-27 11:30:48 +0530847 if (IS_ERR(task)) {
848 pr_err("twl4030: could not create irq %d thread!\n", irq_num);
849 status = PTR_ERR(task);
850 goto fail_kthread;
851 }
David Brownella30d46c2008-10-20 23:46:28 +0200852 return status;
Russell King1cef8e42009-07-27 11:30:48 +0530853fail_kthread:
854 free_irq(irq_num, &irq_event);
855fail_rqirq:
856 /* clean up twl4030_sih_setup */
David Brownella30d46c2008-10-20 23:46:28 +0200857fail:
858 for (i = irq_base; i < irq_end; i++)
859 set_irq_chip_and_handler(i, NULL, NULL);
860 destroy_workqueue(wq);
861 wq = NULL;
862 return status;
863}
864
Balaji T Ke8deb282009-12-14 00:25:31 +0100865int twl4030_exit_irq(void)
David Brownella30d46c2008-10-20 23:46:28 +0200866{
867 /* FIXME undo twl_init_irq() */
868 if (twl4030_irq_base) {
869 pr_err("twl4030: can't yet clean up IRQs?\n");
870 return -ENOSYS;
871 }
872 return 0;
873}
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200874
Balaji T Ke8deb282009-12-14 00:25:31 +0100875int twl4030_init_chip_irq(const char *chip)
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200876{
877 if (!strcmp(chip, "twl5031")) {
878 sih_modules = sih_modules_twl5031;
879 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
880 } else {
881 sih_modules = sih_modules_twl4030;
882 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
883 }
884
885 return 0;
886}