The Android Open Source Project | e9df6ba | 2012-12-13 14:55:37 -0800 | [diff] [blame^] | 1 | /****************************************************************************** |
| 2 | * |
| 3 | * Copyright (C) 1999-2012 Broadcom Corporation |
| 4 | * |
| 5 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 6 | * you may not use this file except in compliance with the License. |
| 7 | * You may obtain a copy of the License at: |
| 8 | * |
| 9 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 10 | * |
| 11 | * Unless required by applicable law or agreed to in writing, software |
| 12 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 13 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 14 | * See the License for the specific language governing permissions and |
| 15 | * limitations under the License. |
| 16 | * |
| 17 | ******************************************************************************/ |
| 18 | #ifndef BT_TARGET_H |
| 19 | #define BT_TARGET_H |
| 20 | |
| 21 | #include "data_types.h" |
| 22 | |
| 23 | #ifdef BUILDCFG |
| 24 | #include "buildcfg.h" |
| 25 | #endif |
| 26 | |
| 27 | /* Include common GKI definitions used by this platform */ |
| 28 | #include "gki_target.h" |
| 29 | |
| 30 | #include "bt_types.h" /* This must be defined AFTER buildcfg.h */ |
| 31 | #include "dyn_mem.h" /* defines static and/or dynamic memory for components */ |
| 32 | |
| 33 | /* #define BYPASS_AVDATATRACE */ |
| 34 | |
| 35 | /****************************************************************************** |
| 36 | ** |
| 37 | ** Platform-Specific |
| 38 | ** |
| 39 | ******************************************************************************/ |
| 40 | |
| 41 | /* set to FALSE unless using Zeevo */ |
| 42 | #ifndef ZEEVO_CTRL_DEFINED |
| 43 | #define ZEEVO_CTRL_DEFINED FALSE |
| 44 | #endif |
| 45 | |
| 46 | /* Supporting GPS shared transport */ |
| 47 | #ifndef GPS_INCLUDED |
| 48 | #define GPS_INCLUDED TRUE |
| 49 | #endif |
| 50 | |
| 51 | /* API macros for simulator */ |
| 52 | |
| 53 | #define BTAPI |
| 54 | |
| 55 | #ifndef BTE_BSE_WRAPPER |
| 56 | #ifdef BTE_SIM_APP |
| 57 | #undef BTAPI |
| 58 | #define BTAPI __declspec(dllexport) |
| 59 | #endif |
| 60 | #endif |
| 61 | |
| 62 | #define BT_API BTAPI |
| 63 | #define BTU_API BTAPI |
| 64 | #define A2D_API BTAPI |
| 65 | #define VDP_API BTAPI |
| 66 | #define AVDT_API BTAPI |
| 67 | #define AVCT_API BTAPI |
| 68 | #define AVRC_API BTAPI |
| 69 | #define BIP_API BTAPI |
| 70 | #define BNEP_API BTAPI |
| 71 | #define BPP_API BTAPI |
| 72 | #define BTM_API BTAPI |
| 73 | #define CTP_API BTAPI |
| 74 | #define DUN_API BTAPI |
| 75 | #define FTP_API BTAPI |
| 76 | #define GAP_API BTAPI |
| 77 | #define GOEP_API BTAPI |
| 78 | #define HCI_API BTAPI |
| 79 | #define HCRP_API BTAPI |
| 80 | #define HID_API BTAPI |
| 81 | #define HFP_API BTAPI |
| 82 | #define HSP2_API BTAPI |
| 83 | #define ICP_API BTAPI |
| 84 | #define L2C_API BTAPI |
| 85 | #define OBX_API BTAPI |
| 86 | #define OPP_API BTAPI |
| 87 | #define PAN_API BTAPI |
| 88 | #define RFC_API BTAPI |
| 89 | #define RPC_API BTAPI |
| 90 | #define SDP_API BTAPI |
| 91 | #define SPP_API BTAPI |
| 92 | #define TCS_API BTAPI |
| 93 | #define XML_API BTAPI |
| 94 | #define BTA_API BTAPI |
| 95 | #define SBC_API BTAPI |
| 96 | #define LPM_API BTAPI |
| 97 | #define AMP_API BTAPI |
| 98 | #define MCE_API BTAPI |
| 99 | #define MCA_API BTAPI |
| 100 | #define GATT_API BTAPI |
| 101 | #define SMP_API BTAPI |
| 102 | |
| 103 | |
| 104 | /****************************************************************************** |
| 105 | ** |
| 106 | ** GKI Buffer Pools |
| 107 | ** |
| 108 | ******************************************************************************/ |
| 109 | |
| 110 | /* Receives HCI events from the lower-layer. */ |
| 111 | #ifndef HCI_CMD_POOL_ID |
| 112 | #define HCI_CMD_POOL_ID GKI_POOL_ID_2 |
| 113 | #endif |
| 114 | |
| 115 | #ifndef HCI_CMD_POOL_BUF_SIZE |
| 116 | #define HCI_CMD_POOL_BUF_SIZE GKI_BUF2_SIZE |
| 117 | #endif |
| 118 | |
| 119 | /* Receives ACL data packets from thelower-layer. */ |
| 120 | #ifndef HCI_ACL_POOL_ID |
| 121 | #define HCI_ACL_POOL_ID GKI_POOL_ID_3 |
| 122 | #endif |
| 123 | |
| 124 | #ifndef HCI_ACL_POOL_BUF_SIZE |
| 125 | #define HCI_ACL_POOL_BUF_SIZE GKI_BUF3_SIZE |
| 126 | #endif |
| 127 | |
| 128 | /* Maximum number of buffers available for ACL receive data. */ |
| 129 | #ifndef HCI_ACL_BUF_MAX |
| 130 | #define HCI_ACL_BUF_MAX GKI_BUF3_MAX |
| 131 | #endif |
| 132 | |
| 133 | /* Receives SCO data packets from the lower-layer. */ |
| 134 | #ifndef HCI_SCO_POOL_ID |
| 135 | #define HCI_SCO_POOL_ID GKI_POOL_ID_6 |
| 136 | #endif |
| 137 | |
| 138 | /* Not used. */ |
| 139 | #ifndef HCI_DATA_DESCR_POOL_ID |
| 140 | #define HCI_DATA_DESCR_POOL_ID GKI_POOL_ID_0 |
| 141 | #endif |
| 142 | |
| 143 | /* Sends SDP data packets. */ |
| 144 | #ifndef SDP_POOL_ID |
| 145 | #define SDP_POOL_ID GKI_POOL_ID_2 |
| 146 | #endif |
| 147 | |
| 148 | /* Sends RFCOMM command packets. */ |
| 149 | #ifndef RFCOMM_CMD_POOL_ID |
| 150 | #define RFCOMM_CMD_POOL_ID GKI_POOL_ID_2 |
| 151 | #endif |
| 152 | |
| 153 | #ifndef RFCOMM_CMD_POOL_BUF_SIZE |
| 154 | #define RFCOMM_CMD_POOL_BUF_SIZE GKI_BUF2_SIZE |
| 155 | #endif |
| 156 | |
| 157 | /* Sends RFCOMM data packets. */ |
| 158 | #ifndef RFCOMM_DATA_POOL_ID |
| 159 | #define RFCOMM_DATA_POOL_ID GKI_POOL_ID_3 |
| 160 | #endif |
| 161 | |
| 162 | #ifndef RFCOMM_DATA_POOL_BUF_SIZE |
| 163 | #define RFCOMM_DATA_POOL_BUF_SIZE GKI_BUF3_SIZE |
| 164 | #endif |
| 165 | |
| 166 | /* Sends L2CAP packets to the peer and HCI messages to the controller. */ |
| 167 | #ifndef L2CAP_CMD_POOL_ID |
| 168 | #define L2CAP_CMD_POOL_ID GKI_POOL_ID_2 |
| 169 | #endif |
| 170 | |
| 171 | /* Sends L2CAP segmented packets in ERTM mode */ |
| 172 | #ifndef L2CAP_FCR_TX_POOL_ID |
| 173 | #define L2CAP_FCR_TX_POOL_ID HCI_ACL_POOL_ID |
| 174 | #endif |
| 175 | |
| 176 | /* Receives L2CAP segmented packets in ERTM mode */ |
| 177 | #ifndef L2CAP_FCR_RX_POOL_ID |
| 178 | #define L2CAP_FCR_RX_POOL_ID HCI_ACL_POOL_ID |
| 179 | #endif |
| 180 | |
| 181 | /* Used by BTM when it sends HCI commands to the controller. */ |
| 182 | #ifndef BTM_CMD_POOL_ID |
| 183 | #define BTM_CMD_POOL_ID GKI_POOL_ID_2 |
| 184 | #endif |
| 185 | |
| 186 | /* Sends TCS messages. */ |
| 187 | #ifndef TCS_MSG_POOL_ID |
| 188 | #define TCS_MSG_POOL_ID GKI_POOL_ID_2 |
| 189 | #endif |
| 190 | |
| 191 | #ifndef OBX_CMD_POOL_SIZE |
| 192 | #define OBX_CMD_POOL_SIZE GKI_BUF2_SIZE |
| 193 | #endif |
| 194 | |
| 195 | #ifndef OBX_LRG_DATA_POOL_SIZE |
| 196 | #define OBX_LRG_DATA_POOL_SIZE GKI_BUF4_SIZE |
| 197 | #endif |
| 198 | |
| 199 | #ifndef OBX_LRG_DATA_POOL_ID |
| 200 | #define OBX_LRG_DATA_POOL_ID GKI_POOL_ID_4 |
| 201 | #endif |
| 202 | |
| 203 | /* Used for CTP discovery database. */ |
| 204 | #ifndef CTP_SDP_DB_POOL_ID |
| 205 | #define CTP_SDP_DB_POOL_ID GKI_POOL_ID_3 |
| 206 | #endif |
| 207 | |
| 208 | /* Used for CTP data exchange feature. */ |
| 209 | #ifndef CTP_DATA_EXCHG_POOL_ID |
| 210 | #define CTP_DATA_EXCHG_POOL_ID GKI_POOL_ID_2 |
| 211 | #endif |
| 212 | |
| 213 | /* Used to send data to L2CAP. */ |
| 214 | #ifndef GAP_DATA_POOL_ID |
| 215 | #define GAP_DATA_POOL_ID GKI_POOL_ID_3 |
| 216 | #endif |
| 217 | |
| 218 | /* Used for SPP inquiry and discovery databases. */ |
| 219 | #ifndef SPP_DB_POOL_ID |
| 220 | #define SPP_DB_POOL_ID GKI_POOL_ID_3 |
| 221 | #endif |
| 222 | |
| 223 | #ifndef SPP_DB_SIZE |
| 224 | #define SPP_DB_SIZE GKI_BUF3_SIZE |
| 225 | #endif |
| 226 | |
| 227 | /* HCRP protocol and internal commands. */ |
| 228 | #ifndef HCRP_CMD_POOL_ID |
| 229 | #define HCRP_CMD_POOL_ID GKI_POOL_ID_2 |
| 230 | #endif |
| 231 | |
| 232 | #ifndef HCRP_CMD_POOL_SIZE |
| 233 | #define HCRP_CMD_POOL_SIZE GKI_BUF2_SIZE |
| 234 | #endif |
| 235 | |
| 236 | #ifndef BIP_EVT_POOL_SIZE |
| 237 | #define BIP_EVT_POOL_SIZE GKI_BUF3_SIZE |
| 238 | #endif |
| 239 | |
| 240 | #ifndef BIP_DB_SIZE |
| 241 | #define BIP_DB_SIZE GKI_BUF3_SIZE |
| 242 | #endif |
| 243 | |
| 244 | |
| 245 | /* BNEP data and protocol messages. */ |
| 246 | #ifndef BNEP_POOL_ID |
| 247 | #define BNEP_POOL_ID GKI_POOL_ID_3 |
| 248 | #endif |
| 249 | |
| 250 | /* RPC pool for temporary trace message buffers. */ |
| 251 | #ifndef RPC_SCRATCH_POOL_ID |
| 252 | #define RPC_SCRATCH_POOL_ID GKI_POOL_ID_2 |
| 253 | #endif |
| 254 | |
| 255 | /* RPC scratch buffer size (not related to RPC_SCRATCH_POOL_ID) */ |
| 256 | #ifndef RPC_SCRATCH_BUF_SIZE |
| 257 | #define RPC_SCRATCH_BUF_SIZE GKI_BUF3_SIZE |
| 258 | #endif |
| 259 | |
| 260 | /* RPC pool for protocol messages */ |
| 261 | #ifndef RPC_MSG_POOL_ID |
| 262 | #define RPC_MSG_POOL_ID GKI_POOL_ID_3 |
| 263 | #endif |
| 264 | |
| 265 | #ifndef RPC_MSG_POOL_SIZE |
| 266 | #define RPC_MSG_POOL_SIZE GKI_BUF3_SIZE |
| 267 | #endif |
| 268 | |
| 269 | /* AVDTP pool for protocol messages */ |
| 270 | #ifndef AVDT_CMD_POOL_ID |
| 271 | #define AVDT_CMD_POOL_ID GKI_POOL_ID_2 |
| 272 | #endif |
| 273 | |
| 274 | /* AVDTP pool size for media packets in case of fragmentation */ |
| 275 | #ifndef AVDT_DATA_POOL_SIZE |
| 276 | #define AVDT_DATA_POOL_SIZE GKI_BUF3_SIZE |
| 277 | #endif |
| 278 | |
| 279 | #ifndef PAN_POOL_ID |
| 280 | #define PAN_POOL_ID GKI_POOL_ID_3 |
| 281 | #endif |
| 282 | |
| 283 | /* UNV pool for read/write serialization */ |
| 284 | #ifndef UNV_MSG_POOL_ID |
| 285 | #define UNV_MSG_POOL_ID GKI_POOL_ID_2 |
| 286 | #endif |
| 287 | |
| 288 | #ifndef UNV_MSG_POOL_SIZE |
| 289 | #define UNV_MSG_POOL_SIZE GKI_BUF2_SIZE |
| 290 | #endif |
| 291 | |
| 292 | /* AVCTP pool for protocol messages */ |
| 293 | #ifndef AVCT_CMD_POOL_ID |
| 294 | #define AVCT_CMD_POOL_ID GKI_POOL_ID_1 |
| 295 | #endif |
| 296 | |
| 297 | #ifndef AVCT_META_CMD_POOL_ID |
| 298 | #define AVCT_META_CMD_POOL_ID GKI_POOL_ID_2 |
| 299 | #endif |
| 300 | |
| 301 | /* AVRCP pool for protocol messages */ |
| 302 | #ifndef AVRC_CMD_POOL_ID |
| 303 | #define AVRC_CMD_POOL_ID GKI_POOL_ID_1 |
| 304 | #endif |
| 305 | |
| 306 | /* AVRCP pool size for protocol messages */ |
| 307 | #ifndef AVRC_CMD_POOL_SIZE |
| 308 | #define AVRC_CMD_POOL_SIZE GKI_BUF1_SIZE |
| 309 | #endif |
| 310 | |
| 311 | /* AVRCP Metadata pool for protocol messages */ |
| 312 | #ifndef AVRC_META_CMD_POOL_ID |
| 313 | #define AVRC_META_CMD_POOL_ID GKI_POOL_ID_2 |
| 314 | #endif |
| 315 | |
| 316 | /* AVRCP Metadata pool size for protocol messages */ |
| 317 | #ifndef AVRC_META_CMD_POOL_SIZE |
| 318 | #define AVRC_META_CMD_POOL_SIZE GKI_BUF2_SIZE |
| 319 | #endif |
| 320 | |
| 321 | |
| 322 | /* AVRCP buffer size for browsing channel messages */ |
| 323 | #ifndef AVRC_BROWSE_POOL_SIZE |
| 324 | #define AVRC_BROWSE_POOL_SIZE GKI_MAX_BUF_SIZE |
| 325 | #endif |
| 326 | |
| 327 | /* HDP buffer size for the Pulse Oximeter */ |
| 328 | #ifndef BTA_HL_LRG_DATA_POOL_SIZE |
| 329 | #define BTA_HL_LRG_DATA_POOL_SIZE GKI_BUF7_SIZE |
| 330 | #endif |
| 331 | |
| 332 | #ifndef BTA_HL_LRG_DATA_POOL_ID |
| 333 | #define BTA_HL_LRG_DATA_POOL_ID GKI_POOL_ID_7 |
| 334 | #endif |
| 335 | |
| 336 | /* GATT Server Database pool ID */ |
| 337 | #ifndef GATT_DB_POOL_ID |
| 338 | #define GATT_DB_POOL_ID GKI_POOL_ID_8 |
| 339 | #endif |
| 340 | |
| 341 | |
| 342 | /****************************************************************************** |
| 343 | ** |
| 344 | ** Lower Layer Interface |
| 345 | ** |
| 346 | ******************************************************************************/ |
| 347 | |
| 348 | /* Sends ACL data received over HCI to the upper stack. */ |
| 349 | #ifndef HCI_ACL_DATA_TO_UPPER |
| 350 | #define HCI_ACL_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_ACL; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);} |
| 351 | #endif |
| 352 | |
| 353 | /* Sends SCO data received over HCI to the upper stack. */ |
| 354 | #ifndef HCI_SCO_DATA_TO_UPPER |
| 355 | #define HCI_SCO_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_SCO; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);} |
| 356 | #endif |
| 357 | |
| 358 | /* Sends an HCI event received over HCI to theupper stack. */ |
| 359 | #ifndef HCI_EVT_TO_UPPER |
| 360 | #define HCI_EVT_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_EVT; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);} |
| 361 | #endif |
| 362 | |
| 363 | /* HCI 4 wire power management protocol. */ |
| 364 | #ifndef HCILL_INCLUDED |
| 365 | #define HCILL_INCLUDED FALSE |
| 366 | #endif |
| 367 | |
| 368 | /* Macro for allocating buffer for HCI commands */ |
| 369 | #ifndef HCI_GET_CMD_BUF |
| 370 | #if (!defined(HCI_USE_VARIABLE_SIZE_CMD_BUF) || (HCI_USE_VARIABLE_SIZE_CMD_BUF == FALSE)) |
| 371 | /* Allocate fixed-size buffer from HCI_CMD_POOL (default case) */ |
| 372 | #define HCI_GET_CMD_BUF(paramlen) ((BT_HDR *)GKI_getpoolbuf (HCI_CMD_POOL_ID)) |
| 373 | #else |
| 374 | /* Allocate smallest possible buffer (for platforms with limited RAM) */ |
| 375 | #define HCI_GET_CMD_BUF(paramlen) ((BT_HDR *)GKI_getbuf ((UINT16)(BT_HDR_SIZE + HCIC_PREAMBLE_SIZE + (paramlen)))) |
| 376 | #endif |
| 377 | #endif /* HCI_GET_CMD_BUF */ |
| 378 | |
| 379 | /****************************************************************************** |
| 380 | ** |
| 381 | ** HCI Services (H4) |
| 382 | ** |
| 383 | ******************************************************************************/ |
| 384 | #ifndef HCISU_H4_INCLUDED |
| 385 | #define HCISU_H4_INCLUDED FALSE |
| 386 | #endif |
| 387 | |
| 388 | #ifdef __cplusplus |
| 389 | extern "C" { |
| 390 | #endif |
| 391 | BT_API extern void bte_ncisu_send (BT_HDR *p_pkt, UINT16 event); |
| 392 | BT_API extern void bte_hcisu_send (BT_HDR *p_msg, UINT16 event); |
| 393 | #if (HCISU_H4_INCLUDED == TRUE) |
| 394 | BT_API extern void bte_hcisu_lp_allow_bt_device_sleep (void); |
| 395 | BT_API extern void bte_hcisu_lp_wakeup_host (void); |
| 396 | BT_API extern void bte_hcisu_lp_h4ibss_evt(UINT8 *p, UINT8 evt_len); |
| 397 | #endif |
| 398 | |
| 399 | /* HCILL API for the applications */ |
| 400 | typedef void (tHCILL_SLEEP_ACK)(void); |
| 401 | BT_API extern void HCILL_GoToSleep( tHCILL_SLEEP_ACK *sl_ack_fn); |
| 402 | typedef void (tHCILL_STATE_CBACK)(BOOLEAN is_sleep); |
| 403 | BT_API extern void HCILL_RegState( tHCILL_STATE_CBACK *p_cback); |
| 404 | #ifdef __cplusplus |
| 405 | } |
| 406 | #endif |
| 407 | |
| 408 | /* Sends ACL data received from the upper stack to the BD/EDR HCI transport. */ |
| 409 | #ifndef HCI_ACL_DATA_TO_LOWER |
| 410 | #define HCI_ACL_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_ACL); |
| 411 | #endif |
| 412 | |
| 413 | #ifndef HCI_BLE_ACL_DATA_TO_LOWER |
| 414 | #define HCI_BLE_ACL_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|LOCAL_BLE_CONTROLLER_ID)); |
| 415 | #endif |
| 416 | |
| 417 | /* Sends ACL data received from the upper stack to the AMP HCI transport. */ |
| 418 | #ifndef HCI_AMP_DATA_TO_LOWER |
| 419 | #define HCI_AMP_DATA_TO_LOWER(p,x) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|((UINT16)(x)))); |
| 420 | #endif |
| 421 | |
| 422 | /* Sends SCO data received from the upper stack to the HCI transport. */ |
| 423 | #ifndef HCI_SCO_DATA_TO_LOWER |
| 424 | #define HCI_SCO_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_SCO); |
| 425 | #endif |
| 426 | |
| 427 | /* Sends an HCI command received from the upper stack to the BD/EDR HCI transport. */ |
| 428 | #ifndef HCI_CMD_TO_LOWER |
| 429 | #define HCI_CMD_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_CMD); |
| 430 | #endif |
| 431 | |
| 432 | /* Sends an HCI command received from the upper stack to the AMP HCI transport. */ |
| 433 | #ifndef HCI_CMD_TO_AMP |
| 434 | #define HCI_CMD_TO_AMP(x,p) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_CMD|((UINT16)(x)))); |
| 435 | #endif |
| 436 | |
| 437 | /* Sends an LM Diagnosic command received from the upper stack to the HCI transport. */ |
| 438 | #ifndef HCI_LM_DIAG_TO_LOWER |
| 439 | #define HCI_LM_DIAG_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_DIAG); |
| 440 | #endif |
| 441 | |
| 442 | /* Send HCISU a message to allow BT sleep */ |
| 443 | #ifndef HCI_LP_ALLOW_BT_DEVICE_SLEEP |
| 444 | #if (HCISU_H4_INCLUDED == TRUE) |
| 445 | #define HCI_LP_ALLOW_BT_DEVICE_SLEEP() bte_hcisu_lp_allow_bt_device_sleep() |
| 446 | #else |
| 447 | #define HCI_LP_ALLOW_BT_DEVICE_SLEEP() HCILP_AllowBTDeviceSleep() |
| 448 | #endif |
| 449 | #endif |
| 450 | |
| 451 | /* Send HCISU a message to wakeup host */ |
| 452 | #ifndef HCI_LP_WAKEUP_HOST |
| 453 | #if (HCISU_H4_INCLUDED == TRUE) |
| 454 | #define HCI_LP_WAKEUP_HOST() bte_hcisu_lp_wakeup_host() |
| 455 | #else |
| 456 | #define HCI_LP_WAKEUP_HOST() HCILP_WakeupHost() |
| 457 | #endif |
| 458 | #endif |
| 459 | |
| 460 | /* Send HCISU the received H4IBSS event from controller */ |
| 461 | #ifndef HCI_LP_RCV_H4IBSS_EVT |
| 462 | #if (HCISU_H4_INCLUDED == TRUE) |
| 463 | #define HCI_LP_RCV_H4IBSS_EVT(p1, p2) bte_hcisu_lp_h4ibss_evt((UINT8*)(p1), (UINT8)(p2)) |
| 464 | #else |
| 465 | #define HCI_LP_RCV_H4IBSS_EVT(p1, p2) h4ibss_sleep_mode_evt((UINT8*)(p1), (UINT8)(p2)) |
| 466 | #endif |
| 467 | #endif |
| 468 | |
| 469 | /* If nonzero, the upper-layer sends at most this number of HCI commands to the lower-layer. */ |
| 470 | #ifndef HCI_MAX_SIMUL_CMDS |
| 471 | #define HCI_MAX_SIMUL_CMDS 0 |
| 472 | #endif |
| 473 | |
| 474 | /* Timeout for receiving response to HCI command */ |
| 475 | #ifndef BTU_CMD_CMPL_TIMEOUT |
| 476 | #define BTU_CMD_CMPL_TIMEOUT 8 |
| 477 | #endif |
| 478 | |
| 479 | /* If TRUE, BTU task will check HCISU again when HCI command timer expires */ |
| 480 | #ifndef BTU_CMD_CMPL_TOUT_DOUBLE_CHECK |
| 481 | #define BTU_CMD_CMPL_TOUT_DOUBLE_CHECK FALSE |
| 482 | #endif |
| 483 | |
| 484 | /* If TRUE, stack is compiled to include MM dual stack functionality */ |
| 485 | #ifndef BTU_DUAL_STACK_MM_INCLUDED |
| 486 | #define BTU_DUAL_STACK_MM_INCLUDED FALSE |
| 487 | #endif |
| 488 | |
| 489 | /* If TRUE, stack is compiled to support Embedded Lite Stack in BT chip */ |
| 490 | #ifndef BTU_DUAL_STACK_BTC_INCLUDED |
| 491 | #define BTU_DUAL_STACK_BTC_INCLUDED FALSE |
| 492 | #endif |
| 493 | |
| 494 | /* If TRUE, stack is compiled to support Embedded Lite Stack for AV SNK in BT chip */ |
| 495 | #ifndef BTU_BTC_SNK_INCLUDED |
| 496 | #define BTU_BTC_SNK_INCLUDED FALSE |
| 497 | #endif |
| 498 | |
| 499 | /* If TRUE, stack is compiled as Lite Stack in Multimedia chip */ |
| 500 | /* If FALSE, stack is compiled as Full Stack in Baseband chip */ |
| 501 | #ifndef BTU_STACK_LITE_ENABLED |
| 502 | #define BTU_STACK_LITE_ENABLED FALSE |
| 503 | #endif |
| 504 | |
| 505 | /* Transport pause time (BT slot(0.625ms) unit) when switching between BB and MM */ |
| 506 | /* FW is using a tick which is 20 slot unit so if timeout is between 0 to 20 slot */ |
| 507 | /* then actual timeout would be 0 to 12.5ms because it could be beteen ticks. */ |
| 508 | /* if timeout is between 20 to 40 slot then actual timeout would be 12.5 to 25ms */ |
| 509 | #ifndef BTU_DUAL_TRANSPORT_PAUSE_TIME |
| 510 | #define BTU_DUAL_TRANSPORT_PAUSE_TIME 40 |
| 511 | #endif |
| 512 | |
| 513 | /* if UART baudrate is different between BB and MM, it will be updated during switching */ |
| 514 | #ifndef BTU_DUAL_TRANSPORT_BB_BAUDRATE |
| 515 | #define BTU_DUAL_TRANSPORT_BB_BAUDRATE 115200 |
| 516 | #endif |
| 517 | |
| 518 | #ifndef BTU_DUAL_TRANSPORT_MM_BAUDRATE |
| 519 | #define BTU_DUAL_TRANSPORT_MM_BAUDRATE 921600 |
| 520 | #endif |
| 521 | |
| 522 | /* If TRUE, stack is compiled to include the multi-av feature (A2DP packets are duplicated inside controller) */ |
| 523 | #ifndef BTU_MULTI_AV_INCLUDED |
| 524 | #define BTU_MULTI_AV_INCLUDED FALSE |
| 525 | #endif |
| 526 | |
| 527 | /* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */ |
| 528 | #ifndef BT_1SEC_TIMEOUT |
| 529 | #define BT_1SEC_TIMEOUT (2) |
| 530 | #endif |
| 531 | |
| 532 | /* Quick Timer */ |
| 533 | /* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */ |
| 534 | /* if HCILP_INCLUDED is TRUE then it should have 100 millisecond resolution */ |
| 535 | /* if SLIP_INCLUDED is TRUE then it should have 10 millisecond resolution */ |
| 536 | /* if BCM2045_USE_DELAY is FALSE then it should have 10 millisecond resolution */ |
| 537 | /* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */ |
| 538 | #ifndef QUICK_TIMER_TICKS_PER_SEC |
| 539 | #define QUICK_TIMER_TICKS_PER_SEC 100 /* 10ms timer */ |
| 540 | #endif |
| 541 | |
| 542 | /****************************************************************************** |
| 543 | ** |
| 544 | ** BTM |
| 545 | ** |
| 546 | ******************************************************************************/ |
| 547 | /* if set to TRUE, stack will automatically send an HCI reset at start-up. To be |
| 548 | set to FALSE for advanced start-up / shut-down procedures using USER_HW_ENABLE_API |
| 549 | and USER_HW_DISABLE_API macros */ |
| 550 | #ifndef BTM_AUTOMATIC_HCI_RESET |
| 551 | #define BTM_AUTOMATIC_HCI_RESET TRUE |
| 552 | #endif |
| 553 | |
| 554 | /* Include BTM Discovery database and code. */ |
| 555 | #ifndef BTM_DISCOVERY_INCLUDED |
| 556 | #define BTM_DISCOVERY_INCLUDED TRUE |
| 557 | #endif |
| 558 | |
| 559 | /* Include inquiry code. */ |
| 560 | #ifndef BTM_INQUIRY_INCLUDED |
| 561 | #define BTM_INQUIRY_INCLUDED TRUE |
| 562 | #endif |
| 563 | |
| 564 | /* Cancel Inquiry on incoming SSP - Work around code for a FW issue (CQ#167446). */ |
| 565 | #ifndef BTM_NO_SSP_ON_INQUIRY |
| 566 | #define BTM_NO_SSP_ON_INQUIRY FALSE |
| 567 | #endif |
| 568 | |
| 569 | /* Include periodic inquiry code (used when BTM_INQUIRY_INCLUDED is TRUE). */ |
| 570 | #ifndef BTM_PERIODIC_INQ_INCLUDED |
| 571 | #define BTM_PERIODIC_INQ_INCLUDED TRUE |
| 572 | #endif |
| 573 | |
| 574 | /* Include security authorization code */ |
| 575 | #ifndef BTM_AUTHORIZATION_INCLUDED |
| 576 | #define BTM_AUTHORIZATION_INCLUDED TRUE |
| 577 | #endif |
| 578 | |
| 579 | /* Include the implemenation needed by Pre-Lisbon controller (2.0_EDR or older) */ |
| 580 | #ifndef BTM_PRE_LISBON_INCLUDED |
| 581 | #define BTM_PRE_LISBON_INCLUDED TRUE |
| 582 | #endif |
| 583 | |
| 584 | |
| 585 | /* Includes SCO if TRUE */ |
| 586 | #ifndef BTM_SCO_INCLUDED |
| 587 | #define BTM_SCO_INCLUDED TRUE /* TRUE includes SCO code */ |
| 588 | #endif |
| 589 | |
| 590 | /* Includes SCO if TRUE */ |
| 591 | #ifndef BTM_SCO_HCI_INCLUDED |
| 592 | #define BTM_SCO_HCI_INCLUDED FALSE /* TRUE includes SCO over HCI code */ |
| 593 | #endif |
| 594 | |
| 595 | /* Includes WBS if TRUE */ |
| 596 | #ifndef BTM_WBS_INCLUDED |
| 597 | #define BTM_WBS_INCLUDED FALSE /* TRUE includes WBS code */ |
| 598 | #endif |
| 599 | |
| 600 | /* Includes PCM2 support if TRUE */ |
| 601 | #ifndef BTM_PCM2_INCLUDED |
| 602 | #define BTM_PCM2_INCLUDED FALSE |
| 603 | #endif |
| 604 | |
| 605 | /* If FALSE, AFH channel automatically adjusted based on AMP channel in use */ |
| 606 | /* Set TRUE, if want to bypass AFH channel automatic adjustment and use */ |
| 607 | /* BTA_DM_API_SET_AFH_CHANNELS_ API */ |
| 608 | |
| 609 | #ifndef BTM_BYPASS_AMP_AUTO_AFH |
| 610 | #define BTM_BYPASS_AMP_AUTO_AFH FALSE |
| 611 | #endif |
| 612 | |
| 613 | |
| 614 | /************************** |
| 615 | ** Initial SCO TX credit |
| 616 | *************************/ |
| 617 | /* max TX SCO data packet size */ |
| 618 | #ifndef BTM_SCO_DATA_SIZE_MAX |
| 619 | #define BTM_SCO_DATA_SIZE_MAX 240 |
| 620 | #endif |
| 621 | |
| 622 | /* maximum BTM buffering capacity */ |
| 623 | #ifndef BTM_SCO_MAX_BUF_CAP |
| 624 | #define BTM_SCO_MAX_BUF_CAP (BTM_SCO_INIT_XMIT_CREDIT * 4) |
| 625 | #endif |
| 626 | |
| 627 | /* The size in bytes of the BTM inquiry database. */ |
| 628 | #ifndef BTM_INQ_DB_SIZE |
| 629 | #define BTM_INQ_DB_SIZE 12 |
| 630 | #endif |
| 631 | |
| 632 | /* This is set to enable automatic periodic inquiry at startup. */ |
| 633 | #ifndef BTM_ENABLE_AUTO_INQUIRY |
| 634 | #define BTM_ENABLE_AUTO_INQUIRY FALSE |
| 635 | #endif |
| 636 | |
| 637 | /* This is set to always try to acquire the remote device name. */ |
| 638 | #ifndef BTM_INQ_GET_REMOTE_NAME |
| 639 | #define BTM_INQ_GET_REMOTE_NAME FALSE |
| 640 | #endif |
| 641 | |
| 642 | /* The inquiry duration in 1.28 second units when auto inquiry is enabled. */ |
| 643 | #ifndef BTM_DEFAULT_INQ_DUR |
| 644 | #define BTM_DEFAULT_INQ_DUR 5 |
| 645 | #endif |
| 646 | |
| 647 | /* The inquiry mode when auto inquiry is enabled. */ |
| 648 | #ifndef BTM_DEFAULT_INQ_MODE |
| 649 | #define BTM_DEFAULT_INQ_MODE BTM_GENERAL_INQUIRY |
| 650 | #endif |
| 651 | |
| 652 | /* The default periodic inquiry maximum delay when auto inquiry is enabled, in 1.28 second units. */ |
| 653 | #ifndef BTM_DEFAULT_INQ_MAX_DELAY |
| 654 | #define BTM_DEFAULT_INQ_MAX_DELAY 30 |
| 655 | #endif |
| 656 | |
| 657 | /* The default periodic inquiry minimum delay when auto inquiry is enabled, in 1.28 second units. */ |
| 658 | #ifndef BTM_DEFAULT_INQ_MIN_DELAY |
| 659 | #define BTM_DEFAULT_INQ_MIN_DELAY 20 |
| 660 | #endif |
| 661 | |
| 662 | /* The maximum age of entries in inquiry database in seconds ('0' disables feature). */ |
| 663 | #ifndef BTM_INQ_MAX_AGE |
| 664 | #define BTM_INQ_MAX_AGE 0 |
| 665 | #endif |
| 666 | |
| 667 | /* The maximum age of entries in inquiry database based on inquiry response failure ('0' disables feature). */ |
| 668 | #ifndef BTM_INQ_AGE_BY_COUNT |
| 669 | #define BTM_INQ_AGE_BY_COUNT 0 |
| 670 | #endif |
| 671 | |
| 672 | /* TRUE if controller does not support inquiry event filtering. */ |
| 673 | #ifndef BTM_BYPASS_EVENT_FILTERING |
| 674 | #define BTM_BYPASS_EVENT_FILTERING FALSE |
| 675 | #endif |
| 676 | |
| 677 | /* TRUE if inquiry filtering is desired from BTM. */ |
| 678 | #ifndef BTM_USE_INQ_RESULTS_FILTER |
| 679 | #define BTM_USE_INQ_RESULTS_FILTER TRUE |
| 680 | #endif |
| 681 | |
| 682 | /* The default scan mode */ |
| 683 | #ifndef BTM_DEFAULT_SCAN_TYPE |
| 684 | #define BTM_DEFAULT_SCAN_TYPE BTM_SCAN_TYPE_INTERLACED |
| 685 | #endif |
| 686 | |
| 687 | /* Should connections to unknown devices be allowed when not discoverable? */ |
| 688 | #ifndef BTM_ALLOW_CONN_IF_NONDISCOVER |
| 689 | #define BTM_ALLOW_CONN_IF_NONDISCOVER FALSE |
| 690 | #endif |
| 691 | |
| 692 | /* When connectable mode is set to TRUE, the device will respond to paging. */ |
| 693 | #ifndef BTM_IS_CONNECTABLE |
| 694 | #define BTM_IS_CONNECTABLE FALSE |
| 695 | #endif |
| 696 | |
| 697 | /* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */ |
| 698 | #ifndef BTM_DEFAULT_CONN_WINDOW |
| 699 | #define BTM_DEFAULT_CONN_WINDOW 0x0012 |
| 700 | #endif |
| 701 | |
| 702 | /* Sets the Page_Scan_Activity: the interval between the start of two consecutive page scans. */ |
| 703 | #ifndef BTM_DEFAULT_CONN_INTERVAL |
| 704 | #define BTM_DEFAULT_CONN_INTERVAL 0x0800 |
| 705 | #endif |
| 706 | |
| 707 | /* This is set to automatically perform inquiry scan on startup. */ |
| 708 | #ifndef BTM_IS_DISCOVERABLE |
| 709 | #define BTM_IS_DISCOVERABLE FALSE |
| 710 | #endif |
| 711 | |
| 712 | /* When automatic inquiry scan is enabled, this sets the discovery mode. */ |
| 713 | #ifndef BTM_DEFAULT_DISC_MODE |
| 714 | #define BTM_DEFAULT_DISC_MODE BTM_GENERAL_DISCOVERABLE |
| 715 | #endif |
| 716 | |
| 717 | /* When automatic inquiry scan is enabled, this sets the inquiry scan window. */ |
| 718 | #ifndef BTM_DEFAULT_DISC_WINDOW |
| 719 | #define BTM_DEFAULT_DISC_WINDOW 0x0012 |
| 720 | #endif |
| 721 | |
| 722 | /* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */ |
| 723 | #ifndef BTM_DEFAULT_DISC_INTERVAL |
| 724 | #define BTM_DEFAULT_DISC_INTERVAL 0x0800 |
| 725 | #endif |
| 726 | |
| 727 | /* Sets the period, in seconds, to automatically perform service discovery. */ |
| 728 | #ifndef BTM_AUTO_DISCOVERY_PERIOD |
| 729 | #define BTM_AUTO_DISCOVERY_PERIOD 0 |
| 730 | #endif |
| 731 | |
| 732 | /* The size in bytes of the BTM discovery database (if discovery is included). */ |
| 733 | #ifndef BTM_DISCOVERY_DB_SIZE |
| 734 | #define BTM_DISCOVERY_DB_SIZE 4000 |
| 735 | #endif |
| 736 | |
| 737 | /* Number of milliseconds to delay BTU task startup upon device initialization. */ |
| 738 | #ifndef BTU_STARTUP_DELAY |
| 739 | #define BTU_STARTUP_DELAY 0 |
| 740 | #endif |
| 741 | |
| 742 | /* Whether BTA is included in BTU task. */ |
| 743 | #ifndef BTU_BTA_INCLUDED |
| 744 | #define BTU_BTA_INCLUDED FALSE |
| 745 | #endif |
| 746 | |
| 747 | /* Number of seconds to wait to send an HCI Reset command upon device initialization. */ |
| 748 | #ifndef BTM_FIRST_RESET_DELAY |
| 749 | #define BTM_FIRST_RESET_DELAY 0 |
| 750 | #endif |
| 751 | |
| 752 | /* The number of seconds to wait for controller module to reset after issuing an HCI Reset command. */ |
| 753 | #ifndef BTM_AFTER_RESET_TIMEOUT |
| 754 | #define BTM_AFTER_RESET_TIMEOUT 0 |
| 755 | #endif |
| 756 | |
| 757 | /* The default class of device. */ |
| 758 | #ifndef BTM_INIT_CLASS_OF_DEVICE |
| 759 | #define BTM_INIT_CLASS_OF_DEVICE "\x00\x1F\x00" |
| 760 | #endif |
| 761 | |
| 762 | /* The number of SCO links. */ |
| 763 | #ifndef BTM_MAX_SCO_LINKS |
| 764 | #define BTM_MAX_SCO_LINKS 3 |
| 765 | #endif |
| 766 | |
| 767 | /* The preferred type of SCO links (2-eSCO, 0-SCO). */ |
| 768 | #ifndef BTM_DEFAULT_SCO_MODE |
| 769 | #define BTM_DEFAULT_SCO_MODE 2 |
| 770 | #endif |
| 771 | |
| 772 | /* The number of security records for peer devices. */ |
| 773 | #ifndef BTM_SEC_MAX_DEVICE_RECORDS |
| 774 | #define BTM_SEC_MAX_DEVICE_RECORDS 8 |
| 775 | #endif |
| 776 | |
| 777 | /* The number of security records for services. */ |
| 778 | #ifndef BTM_SEC_MAX_SERVICE_RECORDS |
| 779 | #define BTM_SEC_MAX_SERVICE_RECORDS 24 |
| 780 | #endif |
| 781 | |
| 782 | /* If True, force a retrieval of remote device name for each bond in case it's changed */ |
| 783 | #ifndef BTM_SEC_FORCE_RNR_FOR_DBOND |
| 784 | #define BTM_SEC_FORCE_RNR_FOR_DBOND TRUE |
| 785 | #endif |
| 786 | |
| 787 | /* Maximum device name length used in btm database. */ |
| 788 | #ifndef BTM_MAX_REM_BD_NAME_LEN |
| 789 | #define BTM_MAX_REM_BD_NAME_LEN 20 |
| 790 | #endif |
| 791 | |
| 792 | /* Maximum local device name length stored btm database. |
| 793 | '0' disables storage of the local name in BTM */ |
| 794 | #ifndef BTM_MAX_LOC_BD_NAME_LEN |
| 795 | #define BTM_MAX_LOC_BD_NAME_LEN 31 |
| 796 | #endif |
| 797 | |
| 798 | /* TRUE if default string is used, FALSE if device name is set in the application */ |
| 799 | #ifndef BTM_USE_DEF_LOCAL_NAME |
| 800 | #define BTM_USE_DEF_LOCAL_NAME FALSE |
| 801 | #endif |
| 802 | |
| 803 | /* Fixed Default String (Ignored if BTM_USE_DEF_LOCAL_NAME is FALSE) */ |
| 804 | #ifndef BTM_DEF_LOCAL_NAME |
| 805 | #define BTM_DEF_LOCAL_NAME "" |
| 806 | #endif |
| 807 | |
| 808 | /* Maximum service name stored with security authorization (0 if not needed) */ |
| 809 | #ifndef BTM_SEC_SERVICE_NAME_LEN |
| 810 | #define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN |
| 811 | #endif |
| 812 | |
| 813 | /* Maximum number of pending security callback */ |
| 814 | #ifndef BTM_SEC_MAX_CALLBACKS |
| 815 | #define BTM_SEC_MAX_CALLBACKS 7 |
| 816 | #endif |
| 817 | |
| 818 | /* Maximum length of the service name. */ |
| 819 | #ifndef BT_MAX_SERVICE_NAME_LEN |
| 820 | #define BT_MAX_SERVICE_NAME_LEN 21 |
| 821 | #endif |
| 822 | |
| 823 | /* ACL buffer size in HCI Host Buffer Size command. */ |
| 824 | #ifndef BTM_ACL_BUF_SIZE |
| 825 | #define BTM_ACL_BUF_SIZE 0 |
| 826 | #endif |
| 827 | |
| 828 | /* This is set to use the BTM power manager. */ |
| 829 | #ifndef BTM_PWR_MGR_INCLUDED |
| 830 | #define BTM_PWR_MGR_INCLUDED TRUE |
| 831 | #endif |
| 832 | |
| 833 | /* The maximum number of clients that can register with the power manager. */ |
| 834 | #ifndef BTM_MAX_PM_RECORDS |
| 835 | #define BTM_MAX_PM_RECORDS 2 |
| 836 | #endif |
| 837 | |
| 838 | /* This is set to show debug trace messages for the power manager. */ |
| 839 | #ifndef BTM_PM_DEBUG |
| 840 | #define BTM_PM_DEBUG FALSE |
| 841 | #endif |
| 842 | |
| 843 | /* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */ |
| 844 | #ifndef BTM_SCO_WAKE_PARKED_LINK |
| 845 | #define BTM_SCO_WAKE_PARKED_LINK TRUE |
| 846 | #endif |
| 847 | |
| 848 | /* May be set to the the name of a function used for vendor specific chip initialization */ |
| 849 | #ifndef BTM_APP_DEV_INIT |
| 850 | /* #define BTM_APP_DEV_INIT myInitFunction() */ |
| 851 | #endif |
| 852 | |
| 853 | /* This is set to TRUE if the busy level change event is desired. (replace ACL change event) */ |
| 854 | #ifndef BTM_BUSY_LEVEL_CHANGE_INCLUDED |
| 855 | #define BTM_BUSY_LEVEL_CHANGE_INCLUDED TRUE |
| 856 | #endif |
| 857 | |
| 858 | /* If the user does not respond to security process requests within this many seconds, |
| 859 | * a negative response would be sent automatically. |
| 860 | * It's recommended to use a value between 30 and OBX_TIMEOUT_VALUE |
| 861 | * 30 is LMP response timeout value */ |
| 862 | #ifndef BTM_SEC_TIMEOUT_VALUE |
| 863 | #define BTM_SEC_TIMEOUT_VALUE 35 |
| 864 | #endif |
| 865 | |
| 866 | /* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */ |
| 867 | #ifndef BTM_MAX_VSE_CALLBACKS |
| 868 | #define BTM_MAX_VSE_CALLBACKS 3 |
| 869 | #endif |
| 870 | |
| 871 | /* Number of streams for dual stack */ |
| 872 | #ifndef BTM_SYNC_INFO_NUM_STR |
| 873 | #define BTM_SYNC_INFO_NUM_STR 2 |
| 874 | #endif |
| 875 | |
| 876 | /* Number of streams for dual stack in BT Controller */ |
| 877 | #ifndef BTM_SYNC_INFO_NUM_STR_BTC |
| 878 | #define BTM_SYNC_INFO_NUM_STR_BTC 2 |
| 879 | #endif |
| 880 | |
| 881 | /****************************************** |
| 882 | ** Lisbon Features |
| 883 | *******************************************/ |
| 884 | /* This is set to TRUE if the server Extended Inquiry Response feature is desired. */ |
| 885 | /* server sends EIR to client */ |
| 886 | #ifndef BTM_EIR_SERVER_INCLUDED |
| 887 | #define BTM_EIR_SERVER_INCLUDED TRUE |
| 888 | #endif |
| 889 | |
| 890 | /* This is set to TRUE if the client Extended Inquiry Response feature is desired. */ |
| 891 | /* client inquiry to server */ |
| 892 | #ifndef BTM_EIR_CLIENT_INCLUDED |
| 893 | #define BTM_EIR_CLIENT_INCLUDED TRUE |
| 894 | #endif |
| 895 | |
| 896 | /* This is set to TRUE if the FEC is required for EIR packet. */ |
| 897 | #ifndef BTM_EIR_DEFAULT_FEC_REQUIRED |
| 898 | #define BTM_EIR_DEFAULT_FEC_REQUIRED TRUE |
| 899 | #endif |
| 900 | |
| 901 | /* User defined UUID look up table */ |
| 902 | #ifndef BTM_EIR_UUID_LKUP_TBL |
| 903 | #endif |
| 904 | |
| 905 | /* The IO capability of the local device (for Simple Pairing) */ |
| 906 | #ifndef BTM_LOCAL_IO_CAPS |
| 907 | #define BTM_LOCAL_IO_CAPS BTM_IO_CAP_IO |
| 908 | #endif |
| 909 | |
| 910 | /* The default MITM Protection Requirement (for Simple Pairing) |
| 911 | * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */ |
| 912 | #ifndef BTM_DEFAULT_AUTH_REQ |
| 913 | #define BTM_DEFAULT_AUTH_REQ BTM_AUTH_SP_NO |
| 914 | #endif |
| 915 | |
| 916 | /* The default MITM Protection Requirement for dedicated bonding using Simple Pairing |
| 917 | * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */ |
| 918 | #ifndef BTM_DEFAULT_DD_AUTH_REQ |
| 919 | #define BTM_DEFAULT_DD_AUTH_REQ BTM_AUTH_AP_YES |
| 920 | #endif |
| 921 | |
| 922 | /* Include Out-of-Band implementation for Simple Pairing */ |
| 923 | #ifndef BTM_OOB_INCLUDED |
| 924 | #define BTM_OOB_INCLUDED TRUE |
| 925 | #endif |
| 926 | |
| 927 | /* TRUE to include Sniff Subrating */ |
| 928 | #ifndef BTM_SSR_INCLUDED |
| 929 | #define BTM_SSR_INCLUDED TRUE |
| 930 | #endif |
| 931 | |
| 932 | /************************* |
| 933 | ** End of Lisbon Features |
| 934 | **************************/ |
| 935 | |
| 936 | /* Used for conformance testing ONLY */ |
| 937 | #ifndef BTM_BLE_CONFORMANCE_TESTING |
| 938 | #define BTM_BLE_CONFORMANCE_TESTING FALSE |
| 939 | #endif |
| 940 | |
| 941 | |
| 942 | /****************************************************************************** |
| 943 | ** |
| 944 | ** L2CAP |
| 945 | ** |
| 946 | ******************************************************************************/ |
| 947 | |
| 948 | /* Flow control and retransmission mode */ |
| 949 | |
| 950 | #ifndef L2CAP_FCR_INCLUDED |
| 951 | #define L2CAP_FCR_INCLUDED FALSE |
| 952 | #endif |
| 953 | |
| 954 | /* The maximum number of simultaneous links that L2CAP can support. */ |
| 955 | #ifndef MAX_L2CAP_LINKS |
| 956 | #define MAX_L2CAP_LINKS 4 |
| 957 | #endif |
| 958 | |
| 959 | /* The maximum number of simultaneous channels that L2CAP can support. */ |
| 960 | #ifndef MAX_L2CAP_CHANNELS |
| 961 | #define MAX_L2CAP_CHANNELS 10 |
| 962 | #endif |
| 963 | |
| 964 | /* The maximum number of simultaneous applications that can register with L2CAP. */ |
| 965 | #ifndef MAX_L2CAP_CLIENTS |
| 966 | #define MAX_L2CAP_CLIENTS 8 |
| 967 | #endif |
| 968 | |
| 969 | /* The number of seconds of link inactivity before a link is disconnected. */ |
| 970 | #ifndef L2CAP_LINK_INACTIVITY_TOUT |
| 971 | #define L2CAP_LINK_INACTIVITY_TOUT 3 |
| 972 | #endif |
| 973 | |
| 974 | /* The number of seconds of link inactivity after bonding before a link is disconnected. */ |
| 975 | #ifndef L2CAP_BONDING_TIMEOUT |
| 976 | #define L2CAP_BONDING_TIMEOUT 3 |
| 977 | #endif |
| 978 | |
| 979 | /* The time from the HCI connection complete to disconnect if no channel is established. */ |
| 980 | #ifndef L2CAP_LINK_STARTUP_TOUT |
| 981 | #define L2CAP_LINK_STARTUP_TOUT 60 |
| 982 | #endif |
| 983 | |
| 984 | /* The L2CAP MTU; must be in accord with the HCI ACL pool size. */ |
| 985 | #ifndef L2CAP_MTU_SIZE |
| 986 | #define L2CAP_MTU_SIZE 1691 |
| 987 | #endif |
| 988 | |
| 989 | /* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */ |
| 990 | #ifndef L2CAP_MPS_OVER_BR_EDR |
| 991 | #define L2CAP_MPS_OVER_BR_EDR 1010 |
| 992 | #endif |
| 993 | |
| 994 | /* The L2CAP MPS over AMP; must be in accord with the FCR tx pool size and ACL down buffer size. */ |
| 995 | #ifndef L2CAP_MPS_OVER_AMP |
| 996 | #define L2CAP_MPS_OVER_AMP 1480 |
| 997 | #endif |
| 998 | |
| 999 | /* This is set to enable host flow control. */ |
| 1000 | #ifndef L2CAP_HOST_FLOW_CTRL |
| 1001 | #define L2CAP_HOST_FLOW_CTRL FALSE |
| 1002 | #endif |
| 1003 | |
| 1004 | /* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */ |
| 1005 | #ifndef L2CAP_HOST_FC_ACL_BUFS |
| 1006 | #define L2CAP_HOST_FC_ACL_BUFS 20 |
| 1007 | #endif |
| 1008 | |
| 1009 | /* The percentage of the queue size allowed before a congestion event is sent to the L2CAP client (typically 120%). */ |
| 1010 | #ifndef L2CAP_FWD_CONG_THRESH |
| 1011 | #define L2CAP_FWD_CONG_THRESH 120 |
| 1012 | #endif |
| 1013 | |
| 1014 | /* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */ |
| 1015 | #ifndef L2CAP_WAKE_PARKED_LINK |
| 1016 | #define L2CAP_WAKE_PARKED_LINK TRUE |
| 1017 | #endif |
| 1018 | |
| 1019 | /* Whether link wants to be the master or the slave. */ |
| 1020 | #ifndef L2CAP_DESIRED_LINK_ROLE |
| 1021 | #define L2CAP_DESIRED_LINK_ROLE HCI_ROLE_SLAVE |
| 1022 | #endif |
| 1023 | |
| 1024 | /* Include Non-Flushable Packet Boundary Flag feature of Lisbon */ |
| 1025 | #ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED |
| 1026 | #define L2CAP_NON_FLUSHABLE_PB_INCLUDED TRUE |
| 1027 | #endif |
| 1028 | |
| 1029 | /* max queued Multi-AV packets per link including controller */ |
| 1030 | #ifndef L2CAP_MULTI_AV_TOTAL_QUEUED_BUF |
| 1031 | #define L2CAP_MULTI_AV_TOTAL_QUEUED_BUF 6 |
| 1032 | #endif |
| 1033 | |
| 1034 | /* max links supported by Multi-AV feature */ |
| 1035 | #ifndef L2CAP_MAX_MULTI_AV_CID |
| 1036 | #define L2CAP_MAX_MULTI_AV_CID 5 |
| 1037 | #endif |
| 1038 | |
| 1039 | /* Minimum number of ACL credit for high priority link */ |
| 1040 | #ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA |
| 1041 | #define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 4 |
| 1042 | #endif |
| 1043 | |
| 1044 | /* used for monitoring HCI ACL credit management */ |
| 1045 | #ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG |
| 1046 | #define L2CAP_HCI_FLOW_CONTROL_DEBUG TRUE |
| 1047 | #endif |
| 1048 | |
| 1049 | /* Used for calculating transmit buffers off of */ |
| 1050 | #ifndef L2CAP_NUM_XMIT_BUFFS |
| 1051 | #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX |
| 1052 | #endif |
| 1053 | |
| 1054 | /* Unicast Connectionless Data */ |
| 1055 | #ifndef L2CAP_UCD_INCLUDED |
| 1056 | #define L2CAP_UCD_INCLUDED FALSE |
| 1057 | #endif |
| 1058 | |
| 1059 | /* Unicast Connectionless Data MTU */ |
| 1060 | #ifndef L2CAP_UCD_MTU |
| 1061 | #define L2CAP_UCD_MTU L2CAP_MTU_SIZE |
| 1062 | #endif |
| 1063 | |
| 1064 | /* Unicast Connectionless Data Idle Timeout */ |
| 1065 | #ifndef L2CAP_UCD_IDLE_TIMEOUT |
| 1066 | #define L2CAP_UCD_IDLE_TIMEOUT 2 |
| 1067 | #endif |
| 1068 | |
| 1069 | /* Unicast Connectionless Data Idle Timeout */ |
| 1070 | #ifndef L2CAP_UCD_CH_PRIORITY |
| 1071 | #define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM |
| 1072 | #endif |
| 1073 | |
| 1074 | /* Max clients on Unicast Connectionless Data */ |
| 1075 | #ifndef L2CAP_MAX_UCD_CLIENTS |
| 1076 | #define L2CAP_MAX_UCD_CLIENTS 5 |
| 1077 | #endif |
| 1078 | |
| 1079 | /* Used for features using fixed channels; set to zero if no fixed channels supported (AMP, BLE, etc.) */ |
| 1080 | /* Excluding L2CAP signaling channel and UCD */ |
| 1081 | #ifndef L2CAP_NUM_FIXED_CHNLS |
| 1082 | #define L2CAP_NUM_FIXED_CHNLS 4 |
| 1083 | #endif |
| 1084 | |
| 1085 | /* First fixed channel supported; 3 if AMP supported */ |
| 1086 | #ifndef L2CAP_FIRST_FIXED_CHNL |
| 1087 | #define L2CAP_FIRST_FIXED_CHNL 3 |
| 1088 | #endif |
| 1089 | |
| 1090 | #ifndef L2CAP_LAST_FIXED_CHNL |
| 1091 | #define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1) |
| 1092 | #endif |
| 1093 | |
| 1094 | /* Round Robin service channels in link */ |
| 1095 | #ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE |
| 1096 | #define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE TRUE |
| 1097 | #endif |
| 1098 | |
| 1099 | /* Reconfig after move channel between BR/EDR and AMP */ |
| 1100 | #ifndef L2CAP_MOVE_CH_RECONFIG_INCLUDED |
| 1101 | #define L2CAP_MOVE_CH_RECONFIG_INCLUDED FALSE |
| 1102 | #endif |
| 1103 | |
| 1104 | /* Initiate reconfig after move channel between BR/EDR and AMP */ |
| 1105 | #ifndef L2CAP_MOVE_CH_RECONFIG_INTITIATOR |
| 1106 | #define L2CAP_MOVE_CH_RECONFIG_INTITIATOR FALSE |
| 1107 | #endif |
| 1108 | |
| 1109 | /* Adjust our monitor timeout in ms plus peer's processing time on class 2 AMP controller */ |
| 1110 | #ifndef L2CAP_AMP_ADJUST_MONITOR_TOUT |
| 1111 | #define L2CAP_AMP_ADJUST_MONITOR_TOUT 500 |
| 1112 | #endif |
| 1113 | |
| 1114 | /* Adjust our retrans timeout in ms plus peer's processing time on class 2 AMP controller */ |
| 1115 | #ifndef L2CAP_AMP_ADJUST_RETRANS_TOUT |
| 1116 | #define L2CAP_AMP_ADJUST_RETRANS_TOUT 500 |
| 1117 | #endif |
| 1118 | |
| 1119 | /* Default local device's processing time (ms) */ |
| 1120 | #ifndef L2CAP_AMP_PROCESSING_TIME |
| 1121 | #define L2CAP_AMP_PROCESSING_TIME 500 |
| 1122 | #endif |
| 1123 | |
| 1124 | /* Used for calculating transmit buffers off of */ |
| 1125 | #ifndef L2CAP_NUM_XMIT_BUFFS |
| 1126 | #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX |
| 1127 | #endif |
| 1128 | |
| 1129 | /* Used for features using fixed channels; set to zero if no fixed channels supported (AMP, BLE, etc.) */ |
| 1130 | #ifndef L2CAP_NUM_FIXED_CHNLS |
| 1131 | #define L2CAP_NUM_FIXED_CHNLS 1 |
| 1132 | #endif |
| 1133 | |
| 1134 | /* First fixed channel supported; 3 if AMP supported */ |
| 1135 | #ifndef L2CAP_FIRST_FIXED_CHNL |
| 1136 | #define L2CAP_FIRST_FIXED_CHNL 3 |
| 1137 | #endif |
| 1138 | |
| 1139 | #ifndef L2CAP_LAST_FIXED_CHNL |
| 1140 | #define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1) |
| 1141 | #endif |
| 1142 | |
| 1143 | /* used for monitoring eL2CAP data flow */ |
| 1144 | #ifndef L2CAP_ERTM_STATS |
| 1145 | #define L2CAP_ERTM_STATS FALSE |
| 1146 | #endif |
| 1147 | |
| 1148 | /* USED FOR FCR TEST ONLY: When TRUE generates bad tx and rx packets */ |
| 1149 | #ifndef L2CAP_CORRUPT_ERTM_PKTS |
| 1150 | #define L2CAP_CORRUPT_ERTM_PKTS FALSE |
| 1151 | #endif |
| 1152 | |
| 1153 | /* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */ |
| 1154 | #ifndef L2CAP_CONFORMANCE_TESTING |
| 1155 | #define L2CAP_CONFORMANCE_TESTING FALSE |
| 1156 | #endif |
| 1157 | |
| 1158 | /****************************************************************************** |
| 1159 | ** |
| 1160 | ** AMP |
| 1161 | ** |
| 1162 | ******************************************************************************/ |
| 1163 | |
| 1164 | #ifndef AMP_INCLUDED |
| 1165 | #define AMP_INCLUDED FALSE |
| 1166 | #endif |
| 1167 | |
| 1168 | /* TRUE if AMP includes debug functionality. */ |
| 1169 | #ifndef AMP_DEBUG |
| 1170 | #define AMP_DEBUG FALSE |
| 1171 | #endif |
| 1172 | |
| 1173 | /* Maximum number of simultaneous remote AMP Hosts in system */ |
| 1174 | #ifndef AMP_MAX_REMOTE_HOSTS |
| 1175 | #define AMP_MAX_REMOTE_HOSTS MAX_L2CAP_LINKS |
| 1176 | #endif |
| 1177 | |
| 1178 | /* Maximum number of simultaneous remote AMP controllers in system (BR/EDR excluded) */ |
| 1179 | #ifndef AMP_MAX_REMOTE_CTRLS |
| 1180 | #define AMP_MAX_REMOTE_CTRLS 2 |
| 1181 | #endif |
| 1182 | |
| 1183 | /* Maximum number of UUIDs per remote AMP host */ |
| 1184 | #ifndef AMP_MAX_UUIDS_PER_REM_HOST |
| 1185 | #define AMP_MAX_UUIDS_PER_REM_HOST 4 |
| 1186 | #endif |
| 1187 | |
| 1188 | /* Maximum number of simultaneous local AMP controllers in system (BR/EDR excluded) */ |
| 1189 | #ifndef AMP_MAX_LOCAL_CTRLS |
| 1190 | #define AMP_MAX_LOCAL_CTRLS 1 |
| 1191 | #endif |
| 1192 | |
| 1193 | /* Maximum number of simultaneous Physical Links in system */ |
| 1194 | #ifndef AMP_MAX_PHYS_LINKS |
| 1195 | #define AMP_MAX_PHYS_LINKS 1 |
| 1196 | #endif |
| 1197 | |
| 1198 | /* The maximum number of simultaneous AMP logical links that L2CAP can support. */ |
| 1199 | #ifndef AMP_MAX_L2C_LOG_LINKS |
| 1200 | #define AMP_MAX_L2C_LOG_LINKS (MAX_L2CAP_LINKS * 2) |
| 1201 | #endif |
| 1202 | |
| 1203 | /* The number of seconds of link inactivity on AMP fixed channel before the ACL is disconnected. */ |
| 1204 | #ifndef AMP_L2C_INACTIVITY_TIMER |
| 1205 | #define AMP_L2C_INACTIVITY_TIMER 7 |
| 1206 | #endif |
| 1207 | |
| 1208 | #ifndef AMP_NUM_ALWAYS_PRESENT_LOC_CTRLRS |
| 1209 | #define AMP_NUM_ALWAYS_PRESENT_LOC_CTRLRS AMP_MAX_LOCAL_CTRLS |
| 1210 | #endif |
| 1211 | |
| 1212 | /* If this is non-zero value then l2cap overwrites total ACL credit on AMP. */ |
| 1213 | /* This temporarily needs until number in dhd driver is finalized */ |
| 1214 | #ifndef AMP_TOTAL_NUM_BLOCKS |
| 1215 | #define AMP_TOTAL_NUM_BLOCKS 0 |
| 1216 | #endif |
| 1217 | |
| 1218 | /**************************** |
| 1219 | ** AMP Autoswitch Constants |
| 1220 | *****************************/ |
| 1221 | /* AMP physical link inactivity timeout |
| 1222 | ** This is started when the last logical channel got disconnected */ |
| 1223 | #ifndef AMP_PHYS_LINK_INACT_DISC_TOUT |
| 1224 | #define AMP_PHYS_LINK_INACT_DISC_TOUT 20 |
| 1225 | #endif |
| 1226 | |
| 1227 | /* interval between the moments to check if auto-switch ready connections |
| 1228 | ** on this AMP controller have to be moved to BR/EDR and if yes - to |
| 1229 | ** start to move the connections */ |
| 1230 | #ifndef AMP_AS_TOUT_ON_AMP |
| 1231 | #define AMP_AS_TOUT_ON_AMP 1 |
| 1232 | #endif |
| 1233 | |
| 1234 | /* on timeout all auto-switch ready connections |
| 1235 | ** have to be moved from BR/EDR to AMP */ |
| 1236 | #ifndef AMP_AS_TOUT_ON_BR_EDR |
| 1237 | #define AMP_AS_TOUT_ON_BR_EDR 1 |
| 1238 | #endif |
| 1239 | |
| 1240 | /* min time to stay on BR/EDR after auto-switch from AMP |
| 1241 | ** (during this time conditions to switch from BR/EDR to |
| 1242 | ** AMP are ignored) */ |
| 1243 | #ifndef AMP_AS_TOUT_NO_MOVE_TO_AMP |
| 1244 | #define AMP_AS_TOUT_NO_MOVE_TO_AMP 4 |
| 1245 | #endif |
| 1246 | |
| 1247 | /* TRUE means that "tout to check throughput on BR/EDR" |
| 1248 | ** is restarted after "no move to AMP" timer expires, |
| 1249 | ** i.e. move from BR/EDR will start not earlier than |
| 1250 | ** AMP_AS_TOUT_NO_MOVE_TO_AMP + AMP_AS_TOUT_ON_BR_EDR |
| 1251 | ** FALSE means that "tout no move to AMP" and "tout |
| 1252 | ** to check throughput on BR/EDR" run in parallel, i.e. |
| 1253 | ** connections can be moved from BR/EDR any moment after |
| 1254 | ** "tout no move to AMP" expires. */ |
| 1255 | #ifndef AMP_AS_TOUT_ON_BR_EDR_AFTER_NO_MOVE_TO_AMP |
| 1256 | #define AMP_AS_TOUT_ON_BR_EDR_AFTER_NO_MOVE_TO_AMP TRUE |
| 1257 | #endif |
| 1258 | |
| 1259 | /* Until the number of packets sent to L2CAP is <= than this |
| 1260 | ** value preparations for auto-switch BR/EDR->AMP do not start. |
| 1261 | ** If the number of packets sent to L2CAP falls to this |
| 1262 | ** value preparations for auto-switch BR/EDR->AMP stop. */ |
| 1263 | #ifndef AMP_AS_THRESHOLD_ON_BR_EDR |
| 1264 | #define AMP_AS_THRESHOLD_ON_BR_EDR 3 |
| 1265 | #endif |
| 1266 | |
| 1267 | /* the number of counters used to collect throughput data |
| 1268 | ** on AMP controller. Check for auto-switch conditions starts |
| 1269 | ** AMP_AMP_AS_COUNT_ARRAY_SIZE * AMP_AS_TOUT_ON_AMP |
| 1270 | ** sec after the first auto-switch ready connection is moved |
| 1271 | ** to this controller */ |
| 1272 | #ifndef AMP_AMP_AS_COUNT_ARRAY_SIZE |
| 1273 | #define AMP_AMP_AS_COUNT_ARRAY_SIZE 10 |
| 1274 | #endif |
| 1275 | |
| 1276 | /* meaning: flow spec modify is never sent to controller |
| 1277 | ** best effort logical link is created with all |
| 1278 | ** parameters sent to unknown...*/ |
| 1279 | #ifndef AMP_SIMPLISTIC_AGGREGATION |
| 1280 | #define AMP_SIMPLISTIC_AGGREGATION TRUE |
| 1281 | #endif |
| 1282 | |
| 1283 | /* meaning: auto-switch ready connections start move |
| 1284 | ** BR/EDR->AMP after throughput to remote host passes |
| 1285 | ** some threshold in bytes (as opposite to move that |
| 1286 | ** starts if during some time the number of UNACKED |
| 1287 | ** L2CAP packets to remote host stays bigger than some |
| 1288 | ** threshold) */ |
| 1289 | #ifndef AMP_AUTO_SW_TO_AMP_BY_THROUGHPUT |
| 1290 | #define AMP_AUTO_SW_TO_AMP_BY_THROUGHPUT TRUE |
| 1291 | #endif |
| 1292 | |
| 1293 | /* the number of counters used to collect throughput data |
| 1294 | ** on BR/EDR controller. Check for auto-switch conditions starts |
| 1295 | ** AMP_BR_EDR_AS_COUNT_ARRAY_SIZE * AMP_AS_TOUT_ON_BR_EDR |
| 1296 | ** sec after the first auto-switch ready connection is moved |
| 1297 | ** to this controller */ |
| 1298 | #ifndef AMP_BR_EDR_AS_COUNT_ARRAY_SIZE |
| 1299 | #define AMP_BR_EDR_AS_COUNT_ARRAY_SIZE 7 |
| 1300 | #endif |
| 1301 | |
| 1302 | /* if it takes more than this amount of time to transfer object on BR/EDR |
| 1303 | ** application(BTA) will initiate to AMP connection. */ |
| 1304 | #ifndef AMP_AS_TRANSFER_TIME_ON_BR_EDR |
| 1305 | #define AMP_AS_TRANSFER_TIME_ON_BR_EDR 5 |
| 1306 | #endif |
| 1307 | |
| 1308 | |
| 1309 | #ifndef AMP_RFC_TEST |
| 1310 | #define AMP_RFC_TEST FALSE |
| 1311 | #endif |
| 1312 | |
| 1313 | #ifndef TIMER_PARAM_TYPE |
| 1314 | #ifdef WIN2000 |
| 1315 | #define TIMER_PARAM_TYPE void * |
| 1316 | #else |
| 1317 | #define TIMER_PARAM_TYPE UINT32 |
| 1318 | #endif |
| 1319 | #endif |
| 1320 | |
| 1321 | /****************************************************************************** |
| 1322 | ** |
| 1323 | ** BLE |
| 1324 | ** |
| 1325 | ******************************************************************************/ |
| 1326 | |
| 1327 | #ifndef BLE_INCLUDED |
| 1328 | #define BLE_INCLUDED FALSE |
| 1329 | #endif |
| 1330 | |
| 1331 | #ifndef LOCAL_BLE_CONTROLLER_ID |
| 1332 | #define LOCAL_BLE_CONTROLLER_ID (AMP_MAX_LOCAL_CTRLS + 1) |
| 1333 | #endif |
| 1334 | |
| 1335 | /****************************************************************************** |
| 1336 | ** |
| 1337 | ** ATT/GATT Protocol/Profile Settings |
| 1338 | ** |
| 1339 | ******************************************************************************/ |
| 1340 | #ifndef ATT_INCLUDED |
| 1341 | #define ATT_INCLUDED FALSE |
| 1342 | #endif |
| 1343 | |
| 1344 | #ifndef ATT_DEBUG |
| 1345 | #define ATT_DEBUG FALSE |
| 1346 | #endif |
| 1347 | |
| 1348 | #ifndef GATT_SERVER_ENABLED |
| 1349 | #define GATT_SERVER_ENABLED FALSE |
| 1350 | #endif |
| 1351 | |
| 1352 | #ifndef GATT_CLIENT_ENABLED |
| 1353 | #define GATT_CLIENT_ENABLED FALSE |
| 1354 | #endif |
| 1355 | |
| 1356 | #ifndef GATT_MAX_SR_PROFILES |
| 1357 | #define GATT_MAX_SR_PROFILES 32 /* max is 32 */ |
| 1358 | #endif |
| 1359 | |
| 1360 | #ifndef GATT_MAX_APPS |
| 1361 | #define GATT_MAX_APPS 10 /* note: 2 apps used internally GATT and GAP */ |
| 1362 | #endif |
| 1363 | |
| 1364 | #ifndef GATT_MAX_PHY_CHANNEL |
| 1365 | #define GATT_MAX_PHY_CHANNEL 4 |
| 1366 | #endif |
| 1367 | |
| 1368 | /* Used for conformance testing ONLY */ |
| 1369 | #ifndef GATT_CONFORMANCE_TESTING |
| 1370 | #define GATT_CONFORMANCE_TESTING FALSE |
| 1371 | #endif |
| 1372 | |
| 1373 | /* number of background connection device allowence, ideally to be the same as WL size |
| 1374 | */ |
| 1375 | #ifndef GATT_MAX_BG_CONN_DEV |
| 1376 | #define GATT_MAX_BG_CONN_DEV 32 |
| 1377 | #endif |
| 1378 | |
| 1379 | /****************************************************************************** |
| 1380 | ** |
| 1381 | ** SMP |
| 1382 | ** |
| 1383 | ******************************************************************************/ |
| 1384 | #ifndef SMP_INCLUDED |
| 1385 | #define SMP_INCLUDED FALSE |
| 1386 | #endif |
| 1387 | |
| 1388 | #ifndef SMP_DEBUG |
| 1389 | #define SMP_DEBUG FALSE |
| 1390 | #endif |
| 1391 | |
| 1392 | #ifndef SMP_DEFAULT_AUTH_REQ |
| 1393 | #define SMP_DEFAULT_AUTH_REQ SMP_AUTH_NB_ENC_ONLY |
| 1394 | #endif |
| 1395 | |
| 1396 | #ifndef SMP_MAX_ENC_KEY_SIZE |
| 1397 | #define SMP_MAX_ENC_KEY_SIZE 16 |
| 1398 | #endif |
| 1399 | |
| 1400 | #ifndef SMP_MIN_ENC_KEY_SIZE |
| 1401 | #define SMP_MIN_ENC_KEY_SIZE 7 |
| 1402 | #endif |
| 1403 | |
| 1404 | /* Used for conformance testing ONLY */ |
| 1405 | #ifndef SMP_CONFORMANCE_TESTING |
| 1406 | #define SMP_CONFORMANCE_TESTING FALSE |
| 1407 | #endif |
| 1408 | |
| 1409 | /****************************************************************************** |
| 1410 | ** |
| 1411 | ** SDP |
| 1412 | ** |
| 1413 | ******************************************************************************/ |
| 1414 | |
| 1415 | /* This is set to enable SDP server functionality. */ |
| 1416 | #ifndef SDP_SERVER_ENABLED |
| 1417 | #define SDP_SERVER_ENABLED TRUE |
| 1418 | #endif |
| 1419 | |
| 1420 | /* The maximum number of SDP records the server can support. */ |
| 1421 | #ifndef SDP_MAX_RECORDS |
| 1422 | #define SDP_MAX_RECORDS 20 |
| 1423 | #endif |
| 1424 | |
| 1425 | /* The maximum number of attributes in each record. */ |
| 1426 | #ifndef SDP_MAX_REC_ATTR |
| 1427 | #if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE) |
| 1428 | #define SDP_MAX_REC_ATTR 25 |
| 1429 | #else |
| 1430 | #define SDP_MAX_REC_ATTR 13 |
| 1431 | #endif |
| 1432 | #endif |
| 1433 | |
| 1434 | #ifndef SDP_MAX_PAD_LEN |
| 1435 | #define SDP_MAX_PAD_LEN 350 |
| 1436 | #endif |
| 1437 | |
| 1438 | /* The maximum length, in bytes, of an attribute. */ |
| 1439 | #ifndef SDP_MAX_ATTR_LEN |
| 1440 | #if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE) |
| 1441 | #define SDP_MAX_ATTR_LEN 80 |
| 1442 | #else |
| 1443 | #define SDP_MAX_ATTR_LEN 100 |
| 1444 | #endif |
| 1445 | #endif |
| 1446 | |
| 1447 | /* The maximum number of attribute filters supported by SDP databases. */ |
| 1448 | #ifndef SDP_MAX_ATTR_FILTERS |
| 1449 | #define SDP_MAX_ATTR_FILTERS 12 |
| 1450 | #endif |
| 1451 | |
| 1452 | /* The maximum number of UUID filters supported by SDP databases. */ |
| 1453 | #ifndef SDP_MAX_UUID_FILTERS |
| 1454 | #define SDP_MAX_UUID_FILTERS 3 |
| 1455 | #endif |
| 1456 | |
| 1457 | /* This is set to enable SDP client functionality. */ |
| 1458 | #ifndef SDP_CLIENT_ENABLED |
| 1459 | #define SDP_CLIENT_ENABLED TRUE |
| 1460 | #endif |
| 1461 | |
| 1462 | /* The maximum number of record handles retrieved in a search. */ |
| 1463 | #ifndef SDP_MAX_DISC_SERVER_RECS |
| 1464 | #define SDP_MAX_DISC_SERVER_RECS 21 |
| 1465 | #endif |
| 1466 | |
| 1467 | /* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */ |
| 1468 | #ifndef SDP_MAX_LIST_BYTE_COUNT |
| 1469 | #define SDP_MAX_LIST_BYTE_COUNT 1000 |
| 1470 | #endif |
| 1471 | |
| 1472 | /* The maximum number of parameters in an SDP protocol element. */ |
| 1473 | #ifndef SDP_MAX_PROTOCOL_PARAMS |
| 1474 | #define SDP_MAX_PROTOCOL_PARAMS 2 |
| 1475 | #endif |
| 1476 | |
| 1477 | /* The maximum number of simultaneous client and server connections. */ |
| 1478 | #ifndef SDP_MAX_CONNECTIONS |
| 1479 | #define SDP_MAX_CONNECTIONS 4 |
| 1480 | #endif |
| 1481 | |
| 1482 | /* The MTU size for the L2CAP configuration. */ |
| 1483 | #ifndef SDP_MTU_SIZE |
| 1484 | #define SDP_MTU_SIZE 256 |
| 1485 | #endif |
| 1486 | |
| 1487 | /* The flush timeout for the L2CAP configuration. */ |
| 1488 | #ifndef SDP_FLUSH_TO |
| 1489 | #define SDP_FLUSH_TO 0xFFFF |
| 1490 | #endif |
| 1491 | |
| 1492 | /* The name for security authorization. */ |
| 1493 | #ifndef SDP_SERVICE_NAME |
| 1494 | #define SDP_SERVICE_NAME "Service Discovery" |
| 1495 | #endif |
| 1496 | |
| 1497 | /* The security level for BTM. */ |
| 1498 | #ifndef SDP_SECURITY_LEVEL |
| 1499 | #define SDP_SECURITY_LEVEL BTM_SEC_NONE |
| 1500 | #endif |
| 1501 | |
| 1502 | /* Device identification feature. */ |
| 1503 | #ifndef SDP_DI_INCLUDED |
| 1504 | #define SDP_DI_INCLUDED FALSE |
| 1505 | #endif |
| 1506 | |
| 1507 | /****************************************************************************** |
| 1508 | ** |
| 1509 | ** RFCOMM |
| 1510 | ** |
| 1511 | ******************************************************************************/ |
| 1512 | |
| 1513 | #ifndef RFCOMM_INCLUDED |
| 1514 | #define RFCOMM_INCLUDED FALSE |
| 1515 | #endif |
| 1516 | |
| 1517 | /* The maximum number of ports supported. */ |
| 1518 | #ifndef MAX_RFC_PORTS |
| 1519 | #define MAX_RFC_PORTS 5 |
| 1520 | #endif |
| 1521 | |
| 1522 | /* The maximum simultaneous links to different devices. */ |
| 1523 | #ifndef MAX_BD_CONNECTIONS |
| 1524 | #define MAX_BD_CONNECTIONS 1 |
| 1525 | #endif |
| 1526 | |
| 1527 | /* The port receive queue low watermark level, in bytes. */ |
| 1528 | #ifndef PORT_RX_LOW_WM |
| 1529 | #define PORT_RX_LOW_WM 5000 |
| 1530 | #endif |
| 1531 | |
| 1532 | /* The port receive queue high watermark level, in bytes. */ |
| 1533 | #ifndef PORT_RX_HIGH_WM |
| 1534 | #define PORT_RX_HIGH_WM 8000 |
| 1535 | #endif |
| 1536 | |
| 1537 | /* The port receive queue critical watermark level, in bytes. */ |
| 1538 | #ifndef PORT_RX_CRITICAL_WM |
| 1539 | #define PORT_RX_CRITICAL_WM 12000 |
| 1540 | #endif |
| 1541 | |
| 1542 | /* The port receive queue low watermark level, in number of buffers. */ |
| 1543 | #ifndef PORT_RX_BUF_LOW_WM |
| 1544 | #define PORT_RX_BUF_LOW_WM 8 |
| 1545 | #endif |
| 1546 | |
| 1547 | /* The port receive queue high watermark level, in number of buffers. */ |
| 1548 | #ifndef PORT_RX_BUF_HIGH_WM |
| 1549 | #define PORT_RX_BUF_HIGH_WM 16 |
| 1550 | #endif |
| 1551 | |
| 1552 | /* The port receive queue critical watermark level, in number of buffers. */ |
| 1553 | #ifndef PORT_RX_BUF_CRITICAL_WM |
| 1554 | #define PORT_RX_BUF_CRITICAL_WM 22 |
| 1555 | #endif |
| 1556 | |
| 1557 | /* The port transmit queue high watermark level, in bytes. */ |
| 1558 | #ifndef PORT_TX_HIGH_WM |
| 1559 | #define PORT_TX_HIGH_WM 8000 |
| 1560 | #endif |
| 1561 | |
| 1562 | /* The port transmit queue critical watermark level, in bytes. */ |
| 1563 | #ifndef PORT_TX_CRITICAL_WM |
| 1564 | #define PORT_TX_CRITICAL_WM 10000 |
| 1565 | #endif |
| 1566 | |
| 1567 | /* The port transmit queue high watermark level, in number of buffers. */ |
| 1568 | #ifndef PORT_TX_BUF_HIGH_WM |
| 1569 | #define PORT_TX_BUF_HIGH_WM 16 |
| 1570 | #endif |
| 1571 | |
| 1572 | /* The port transmit queue high watermark level, in number of buffers. */ |
| 1573 | #ifndef PORT_TX_BUF_CRITICAL_WM |
| 1574 | #define PORT_TX_BUF_CRITICAL_WM 22 |
| 1575 | #endif |
| 1576 | |
| 1577 | /* The RFCOMM multiplexer preferred flow control mechanism. */ |
| 1578 | #ifndef PORT_FC_DEFAULT |
| 1579 | #define PORT_FC_DEFAULT PORT_FC_CREDIT |
| 1580 | #endif |
| 1581 | |
| 1582 | /* The maximum number of credits receiver sends to peer when using credit-based flow control. */ |
| 1583 | #ifndef PORT_CREDIT_RX_MAX |
| 1584 | #define PORT_CREDIT_RX_MAX 16 |
| 1585 | #endif |
| 1586 | |
| 1587 | /* The credit low watermark level. */ |
| 1588 | #ifndef PORT_CREDIT_RX_LOW |
| 1589 | #define PORT_CREDIT_RX_LOW 8 |
| 1590 | #endif |
| 1591 | |
| 1592 | /* Test code allowing l2cap FEC on RFCOMM.*/ |
| 1593 | #ifndef PORT_ENABLE_L2CAP_FCR_TEST |
| 1594 | #define PORT_ENABLE_L2CAP_FCR_TEST FALSE |
| 1595 | #endif |
| 1596 | |
| 1597 | /* if application like BTA, Java or script test engine is running on other than BTU thread, */ |
| 1598 | /* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_lock() or GKI_disable() */ |
| 1599 | #ifndef PORT_SCHEDULE_LOCK |
| 1600 | #define PORT_SCHEDULE_LOCK GKI_disable() |
| 1601 | #endif |
| 1602 | |
| 1603 | /* if application like BTA, Java or script test engine is running on other than BTU thread, */ |
| 1604 | /* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_unlock() or GKI_enable() */ |
| 1605 | #ifndef PORT_SCHEDULE_UNLOCK |
| 1606 | #define PORT_SCHEDULE_UNLOCK GKI_enable() |
| 1607 | #endif |
| 1608 | |
| 1609 | /****************************************************************************** |
| 1610 | ** |
| 1611 | ** TCS |
| 1612 | ** |
| 1613 | ******************************************************************************/ |
| 1614 | |
| 1615 | #ifndef TCS_INCLUDED |
| 1616 | #define TCS_INCLUDED FALSE |
| 1617 | #endif |
| 1618 | |
| 1619 | /* If set to TRUE, gives lean TCS state machine configuration. */ |
| 1620 | #ifndef TCS_LEAN |
| 1621 | #define TCS_LEAN FALSE |
| 1622 | #endif |
| 1623 | |
| 1624 | /* To include/exclude point-to-multipoint broadcast SETUP configuration. */ |
| 1625 | #ifndef TCS_BCST_SETUP_INCLUDED |
| 1626 | #define TCS_BCST_SETUP_INCLUDED TRUE |
| 1627 | #endif |
| 1628 | |
| 1629 | /* To include/exclude supplementary services. */ |
| 1630 | #ifndef TCS_SUPP_SVCS_INCLUDED |
| 1631 | #define TCS_SUPP_SVCS_INCLUDED TRUE |
| 1632 | #endif |
| 1633 | |
| 1634 | /* To include/exclude WUG master role. */ |
| 1635 | #ifndef TCS_WUG_MASTER_INCLUDED |
| 1636 | #define TCS_WUG_MASTER_INCLUDED TRUE |
| 1637 | #endif |
| 1638 | |
| 1639 | /* To include/exclude WUG member role. */ |
| 1640 | #ifndef TCS_WUG_MEMBER_INCLUDED |
| 1641 | #define TCS_WUG_MEMBER_INCLUDED TRUE |
| 1642 | #endif |
| 1643 | |
| 1644 | /* Maximum number of WUG members. */ |
| 1645 | #ifndef TCS_MAX_WUG_MEMBERS |
| 1646 | #define TCS_MAX_WUG_MEMBERS 7 |
| 1647 | #endif |
| 1648 | |
| 1649 | /* Widcomm specific acknowledgement message to ensure fast and robust operation of WUG FIMA procedure. */ |
| 1650 | #ifndef TCS_WUG_LISTEN_ACPT_ACK_INCLUDED |
| 1651 | #define TCS_WUG_LISTEN_ACPT_ACK_INCLUDED TRUE |
| 1652 | #endif |
| 1653 | |
| 1654 | /* The number of simultaneous calls supported. */ |
| 1655 | #ifndef TCS_MAX_NUM_SIMUL_CALLS |
| 1656 | #define TCS_MAX_NUM_SIMUL_CALLS 3 |
| 1657 | #endif |
| 1658 | |
| 1659 | /* The number of devices the device can connect to. */ |
| 1660 | #ifndef TCS_MAX_NUM_ACL_CONNS |
| 1661 | #define TCS_MAX_NUM_ACL_CONNS 7 |
| 1662 | #endif |
| 1663 | |
| 1664 | /* The maximum length, in bytes, of the company specific information element. */ |
| 1665 | #ifndef TCS_MAX_CO_SPEC_LEN |
| 1666 | #define TCS_MAX_CO_SPEC_LEN 40 |
| 1667 | #endif |
| 1668 | |
| 1669 | /* The maximum length, in bytes, of the audio control information element . */ |
| 1670 | #ifndef TCS_MAX_AUDIO_CTL_LEN |
| 1671 | #define TCS_MAX_AUDIO_CTL_LEN 40 |
| 1672 | #endif |
| 1673 | |
| 1674 | /* (Dis)allow EDR ESCO */ |
| 1675 | #ifndef TCS_AUDIO_USE_ESCO_EDR |
| 1676 | #define TCS_AUDIO_USE_ESCO_EDR FALSE |
| 1677 | #endif |
| 1678 | |
| 1679 | /****************************************************************************** |
| 1680 | ** |
| 1681 | ** OBX |
| 1682 | ** |
| 1683 | ******************************************************************************/ |
| 1684 | #ifndef OBX_INCLUDED |
| 1685 | #define OBX_INCLUDED FALSE |
| 1686 | #endif |
| 1687 | |
| 1688 | #ifndef OBX_CLIENT_INCLUDED |
| 1689 | #define OBX_CLIENT_INCLUDED TRUE |
| 1690 | #endif |
| 1691 | |
| 1692 | #ifndef OBX_SERVER_INCLUDED |
| 1693 | #define OBX_SERVER_INCLUDED TRUE |
| 1694 | #endif |
| 1695 | |
| 1696 | /* TRUE to include OBEX authentication/MD5 code */ |
| 1697 | #ifndef OBX_MD5_INCLUDED |
| 1698 | #define OBX_MD5_INCLUDED TRUE |
| 1699 | #endif |
| 1700 | |
| 1701 | /* TRUE to include OBEX authentication/MD5 test code */ |
| 1702 | #ifndef OBX_MD5_TEST_INCLUDED |
| 1703 | #define OBX_MD5_TEST_INCLUDED FALSE |
| 1704 | #endif |
| 1705 | |
| 1706 | /* TRUE to include OBEX 1.4 enhancement (including Obex Over L2CAP) */ |
| 1707 | #ifndef OBX_14_INCLUDED |
| 1708 | #define OBX_14_INCLUDED FALSE |
| 1709 | #endif |
| 1710 | /* MD5 code is required to use OBEX 1.4 features (Reliable session) */ |
| 1711 | #if (OBX_MD5_INCLUDED == FALSE) |
| 1712 | #undef OBX_14_INCLUDED |
| 1713 | #define OBX_14_INCLUDED FALSE |
| 1714 | #endif |
| 1715 | |
| 1716 | /* L2CAP FCR/eRTM mode is required to use OBEX Over L2CAP */ |
| 1717 | #if (L2CAP_FCR_INCLUDED == FALSE) |
| 1718 | #undef OBX_14_INCLUDED |
| 1719 | #define OBX_14_INCLUDED FALSE |
| 1720 | #endif |
| 1721 | |
| 1722 | /* The timeout value (in seconds) for reliable sessions to remain in suspend. 0xFFFFFFFF for no timeout event. */ |
| 1723 | #ifndef OBX_SESS_TIMEOUT_VALUE |
| 1724 | #define OBX_SESS_TIMEOUT_VALUE 600 |
| 1725 | #endif |
| 1726 | |
| 1727 | /* The idle timeout value. 0 for no timeout event. */ |
| 1728 | #ifndef OBX_TIMEOUT_VALUE |
| 1729 | #define OBX_TIMEOUT_VALUE 60 |
| 1730 | #endif |
| 1731 | |
| 1732 | /* Timeout value used for disconnect */ |
| 1733 | #ifndef OBX_DISC_TOUT_VALUE |
| 1734 | #define OBX_DISC_TOUT_VALUE 5 |
| 1735 | #endif |
| 1736 | |
| 1737 | /* The maximum number of registered servers. */ |
| 1738 | #ifndef OBX_NUM_SERVERS |
| 1739 | #define OBX_NUM_SERVERS 12 |
| 1740 | #endif |
| 1741 | |
| 1742 | /* The maximum number of sessions per registered server. */ |
| 1743 | #ifndef OBX_MAX_SR_SESSION |
| 1744 | #define OBX_MAX_SR_SESSION 4 |
| 1745 | #endif |
| 1746 | |
| 1747 | /* The maximum number of sessions for all registered servers. |
| 1748 | * (must be equal or bigger than OBX_NUM_SERVERS) */ |
| 1749 | #ifndef OBX_NUM_SR_SESSIONS |
| 1750 | #define OBX_NUM_SR_SESSIONS 26 |
| 1751 | #endif |
| 1752 | |
| 1753 | /* The maximum number of sessions per registered server. |
| 1754 | * must be less than MAX_BD_CONNECTIONS */ |
| 1755 | #ifndef OBX_MAX_SR_SESSION |
| 1756 | #define OBX_MAX_SR_SESSION 4 |
| 1757 | #endif |
| 1758 | |
| 1759 | /* The maximum number of suspended sessions per registered servers. */ |
| 1760 | #ifndef OBX_MAX_SUSPEND_SESSIONS |
| 1761 | #define OBX_MAX_SUSPEND_SESSIONS 4 |
| 1762 | #endif |
| 1763 | |
| 1764 | /* The maximum number of active clients. */ |
| 1765 | #ifndef OBX_NUM_CLIENTS |
| 1766 | #define OBX_NUM_CLIENTS 8 |
| 1767 | #endif |
| 1768 | |
| 1769 | /* The maximum length of OBEX target header.*/ |
| 1770 | #ifndef OBX_MAX_TARGET_LEN |
| 1771 | #define OBX_MAX_TARGET_LEN 16 |
| 1772 | #endif |
| 1773 | |
| 1774 | /* The maximum length of authentication challenge realm.*/ |
| 1775 | #ifndef OBX_MAX_REALM_LEN |
| 1776 | #define OBX_MAX_REALM_LEN 30 |
| 1777 | #endif |
| 1778 | |
| 1779 | /* The maximum of GKI buffer queued at OBX before flow control L2CAP */ |
| 1780 | #ifndef OBX_MAX_RX_QUEUE_COUNT |
| 1781 | #define OBX_MAX_RX_QUEUE_COUNT 3 |
| 1782 | #endif |
| 1783 | |
| 1784 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1785 | Pool ID where to reassemble the SDU. |
| 1786 | This Pool will allow buffers to be used that are larger than |
| 1787 | the L2CAP_MAX_MTU. */ |
| 1788 | #ifndef OBX_USER_RX_POOL_ID |
| 1789 | #define OBX_USER_RX_POOL_ID OBX_LRG_DATA_POOL_ID |
| 1790 | #endif |
| 1791 | |
| 1792 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1793 | Pool ID where to hold the SDU. |
| 1794 | This Pool will allow buffers to be used that are larger than |
| 1795 | the L2CAP_MAX_MTU. */ |
| 1796 | #ifndef OBX_USER_TX_POOL_ID |
| 1797 | #define OBX_USER_TX_POOL_ID OBX_LRG_DATA_POOL_ID |
| 1798 | #endif |
| 1799 | |
| 1800 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1801 | GKI Buffer Pool ID used to hold MPS segments during SDU reassembly |
| 1802 | */ |
| 1803 | #ifndef OBX_FCR_RX_POOL_ID |
| 1804 | #define OBX_FCR_RX_POOL_ID HCI_ACL_POOL_ID |
| 1805 | #endif |
| 1806 | |
| 1807 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1808 | GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions. |
| 1809 | L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. |
| 1810 | Note: This pool needs to have enough buffers to hold two times the window size negotiated |
| 1811 | in the L2CA_SetFCROptions (2 * tx_win_size) to allow for retransmissions. |
| 1812 | The size of each buffer must be able to hold the maximum MPS segment size passed in |
| 1813 | L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). |
| 1814 | */ |
| 1815 | #ifndef OBX_FCR_TX_POOL_ID |
| 1816 | #define OBX_FCR_TX_POOL_ID HCI_ACL_POOL_ID |
| 1817 | #endif |
| 1818 | |
| 1819 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1820 | Size of the transmission window when using enhanced retransmission mode. Not used |
| 1821 | in basic and streaming modes. Range: 1 - 63 |
| 1822 | This is used when AMP_INCLUDED == FALSE |
| 1823 | */ |
| 1824 | #ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR |
| 1825 | #define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20 |
| 1826 | #endif |
| 1827 | |
| 1828 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1829 | Size of the transmission window when using enhanced retransmission mode. Not used |
| 1830 | in basic and streaming modes. Range: 1 - 63 |
| 1831 | This is used when AMP_INCLUDED == TRUE |
| 1832 | */ |
| 1833 | #ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_AMP |
| 1834 | #define OBX_FCR_OPT_TX_WINDOW_SIZE_AMP 45 |
| 1835 | #endif |
| 1836 | |
| 1837 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1838 | Number of transmission attempts for a single I-Frame before taking |
| 1839 | Down the connection. Used In ERTM mode only. Value is Ignored in basic and |
| 1840 | Streaming modes. |
| 1841 | Range: 0, 1-0xFF |
| 1842 | 0 - infinite retransmissions |
| 1843 | 1 - single transmission |
| 1844 | */ |
| 1845 | #ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT |
| 1846 | #define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20 |
| 1847 | #endif |
| 1848 | |
| 1849 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1850 | Retransmission Timeout |
| 1851 | Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF. |
| 1852 | */ |
| 1853 | #ifndef OBX_FCR_OPT_RETX_TOUT |
| 1854 | #define OBX_FCR_OPT_RETX_TOUT 2000 |
| 1855 | #endif |
| 1856 | |
| 1857 | /* This option is application when OBX_14_INCLUDED=TRUE |
| 1858 | Monitor Timeout |
| 1859 | Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF. |
| 1860 | */ |
| 1861 | #ifndef OBX_FCR_OPT_MONITOR_TOUT |
| 1862 | #define OBX_FCR_OPT_MONITOR_TOUT 12000 |
| 1863 | #endif |
| 1864 | |
| 1865 | /****************************************************************************** |
| 1866 | ** |
| 1867 | ** BNEP |
| 1868 | ** |
| 1869 | ******************************************************************************/ |
| 1870 | |
| 1871 | #ifndef BNEP_INCLUDED |
| 1872 | #define BNEP_INCLUDED FALSE |
| 1873 | #endif |
| 1874 | |
| 1875 | /* Protocol filtering is an optional feature. Bydefault it will be turned on */ |
| 1876 | #ifndef BNEP_SUPPORTS_PROT_FILTERS |
| 1877 | #define BNEP_SUPPORTS_PROT_FILTERS TRUE |
| 1878 | #endif |
| 1879 | |
| 1880 | /* Multicast filtering is an optional feature. Bydefault it will be turned on */ |
| 1881 | #ifndef BNEP_SUPPORTS_MULTI_FILTERS |
| 1882 | #define BNEP_SUPPORTS_MULTI_FILTERS TRUE |
| 1883 | #endif |
| 1884 | |
| 1885 | /* BNEP status API call is used mainly to get the L2CAP handle */ |
| 1886 | #ifndef BNEP_SUPPORTS_STATUS_API |
| 1887 | #define BNEP_SUPPORTS_STATUS_API TRUE |
| 1888 | #endif |
| 1889 | |
| 1890 | /* This is just a debug function */ |
| 1891 | #ifndef BNEP_SUPPORTS_DEBUG_DUMP |
| 1892 | #define BNEP_SUPPORTS_DEBUG_DUMP TRUE |
| 1893 | #endif |
| 1894 | |
| 1895 | #ifndef BNEP_SUPPORTS_ALL_UUID_LENGTHS |
| 1896 | #define BNEP_SUPPORTS_ALL_UUID_LENGTHS TRUE /* Otherwise it will support only 16bit UUIDs */ |
| 1897 | #endif |
| 1898 | |
| 1899 | /* |
| 1900 | ** When BNEP connection changes roles after the connection is established |
| 1901 | ** we will do an authentication check again on the new role |
| 1902 | */ |
| 1903 | #ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH |
| 1904 | #define BNEP_DO_AUTH_FOR_ROLE_SWITCH TRUE |
| 1905 | #endif |
| 1906 | |
| 1907 | |
| 1908 | /* Maximum number of protocol filters supported. */ |
| 1909 | #ifndef BNEP_MAX_PROT_FILTERS |
| 1910 | #define BNEP_MAX_PROT_FILTERS 5 |
| 1911 | #endif |
| 1912 | |
| 1913 | /* Maximum number of multicast filters supported. */ |
| 1914 | #ifndef BNEP_MAX_MULTI_FILTERS |
| 1915 | #define BNEP_MAX_MULTI_FILTERS 5 |
| 1916 | #endif |
| 1917 | |
| 1918 | /* Minimum MTU size. */ |
| 1919 | #ifndef BNEP_MIN_MTU_SIZE |
| 1920 | #define BNEP_MIN_MTU_SIZE L2CAP_MTU_SIZE |
| 1921 | #endif |
| 1922 | |
| 1923 | /* Preferred MTU size. */ |
| 1924 | #ifndef BNEP_MTU_SIZE |
| 1925 | #define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE |
| 1926 | #endif |
| 1927 | |
| 1928 | /* Maximum size of user data, in bytes. */ |
| 1929 | #ifndef BNEP_MAX_USER_DATA_SIZE |
| 1930 | #define BNEP_MAX_USER_DATA_SIZE 1500 |
| 1931 | #endif |
| 1932 | |
| 1933 | /* Maximum number of buffers allowed in transmit data queue. */ |
| 1934 | #ifndef BNEP_MAX_XMITQ_DEPTH |
| 1935 | #define BNEP_MAX_XMITQ_DEPTH 20 |
| 1936 | #endif |
| 1937 | |
| 1938 | /* Maximum number BNEP of connections supported. */ |
| 1939 | #ifndef BNEP_MAX_CONNECTIONS |
| 1940 | #define BNEP_MAX_CONNECTIONS 7 |
| 1941 | #endif |
| 1942 | |
| 1943 | |
| 1944 | /****************************************************************************** |
| 1945 | ** |
| 1946 | ** AVDTP |
| 1947 | ** |
| 1948 | ******************************************************************************/ |
| 1949 | |
| 1950 | #ifndef AVDT_INCLUDED |
| 1951 | #define AVDT_INCLUDED FALSE |
| 1952 | #endif |
| 1953 | |
| 1954 | /* Include reporting capability in AVDTP */ |
| 1955 | #ifndef AVDT_REPORTING |
| 1956 | #define AVDT_REPORTING TRUE |
| 1957 | #endif |
| 1958 | |
| 1959 | /* Include multiplexing capability in AVDTP */ |
| 1960 | #ifndef AVDT_MULTIPLEXING |
| 1961 | #define AVDT_MULTIPLEXING TRUE |
| 1962 | #endif |
| 1963 | |
| 1964 | /* Number of simultaneous links to different peer devices. */ |
| 1965 | #ifndef AVDT_NUM_LINKS |
| 1966 | #define AVDT_NUM_LINKS 2 |
| 1967 | #endif |
| 1968 | |
| 1969 | /* Number of simultaneous stream endpoints. */ |
| 1970 | #ifndef AVDT_NUM_SEPS |
| 1971 | #define AVDT_NUM_SEPS 3 |
| 1972 | #endif |
| 1973 | |
| 1974 | /* Number of transport channels setup per media stream(audio or video) */ |
| 1975 | #ifndef AVDT_NUM_CHANNELS |
| 1976 | |
| 1977 | #if AVDT_REPORTING == TRUE |
| 1978 | /* signaling, media and reporting channels */ |
| 1979 | #define AVDT_NUM_CHANNELS 3 |
| 1980 | #else |
| 1981 | /* signaling and media channels */ |
| 1982 | #define AVDT_NUM_CHANNELS 2 |
| 1983 | #endif |
| 1984 | |
| 1985 | #endif |
| 1986 | |
| 1987 | /* Number of transport channels setup by AVDT for all media streams |
| 1988 | * AVDT_NUM_CHANNELS * Number of simultaneous streams. |
| 1989 | */ |
| 1990 | #ifndef AVDT_NUM_TC_TBL |
| 1991 | #define AVDT_NUM_TC_TBL 6 |
| 1992 | #endif |
| 1993 | |
| 1994 | |
| 1995 | /* Maximum size in bytes of the codec capabilities information element. */ |
| 1996 | #ifndef AVDT_CODEC_SIZE |
| 1997 | #define AVDT_CODEC_SIZE 10 |
| 1998 | #endif |
| 1999 | |
| 2000 | /* Maximum size in bytes of the content protection information element. */ |
| 2001 | #ifndef AVDT_PROTECT_SIZE |
| 2002 | #define AVDT_PROTECT_SIZE 90 |
| 2003 | #endif |
| 2004 | |
| 2005 | /* Maximum number of GKI buffers in the fragment queue (for video frames). |
| 2006 | * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */ |
| 2007 | #ifndef AVDT_MAX_FRAG_COUNT |
| 2008 | #define AVDT_MAX_FRAG_COUNT 15 |
| 2009 | #endif |
| 2010 | |
| 2011 | /****************************************************************************** |
| 2012 | ** |
| 2013 | ** PAN |
| 2014 | ** |
| 2015 | ******************************************************************************/ |
| 2016 | |
| 2017 | #ifndef PAN_INCLUDED |
| 2018 | #define PAN_INCLUDED FALSE |
| 2019 | #endif |
| 2020 | |
| 2021 | /* This will enable the PANU role */ |
| 2022 | #ifndef PAN_SUPPORTS_ROLE_PANU |
| 2023 | #define PAN_SUPPORTS_ROLE_PANU TRUE |
| 2024 | #endif |
| 2025 | |
| 2026 | /* This will enable the GN role */ |
| 2027 | #ifndef PAN_SUPPORTS_ROLE_GN |
| 2028 | #define PAN_SUPPORTS_ROLE_GN TRUE |
| 2029 | #endif |
| 2030 | |
| 2031 | /* This will enable the NAP role */ |
| 2032 | #ifndef PAN_SUPPORTS_ROLE_NAP |
| 2033 | #define PAN_SUPPORTS_ROLE_NAP TRUE |
| 2034 | #endif |
| 2035 | |
| 2036 | /* This is just for debugging purposes */ |
| 2037 | #ifndef PAN_SUPPORTS_DEBUG_DUMP |
| 2038 | #define PAN_SUPPORTS_DEBUG_DUMP TRUE |
| 2039 | #endif |
| 2040 | |
| 2041 | |
| 2042 | /* Maximum number of PAN connections allowed */ |
| 2043 | #ifndef MAX_PAN_CONNS |
| 2044 | #define MAX_PAN_CONNS 7 |
| 2045 | #endif |
| 2046 | |
| 2047 | /* Default service name for NAP role */ |
| 2048 | #ifndef PAN_NAP_DEFAULT_SERVICE_NAME |
| 2049 | #define PAN_NAP_DEFAULT_SERVICE_NAME "Network Access Point Service" |
| 2050 | #endif |
| 2051 | |
| 2052 | /* Default service name for GN role */ |
| 2053 | #ifndef PAN_GN_DEFAULT_SERVICE_NAME |
| 2054 | #define PAN_GN_DEFAULT_SERVICE_NAME "Group Network Service" |
| 2055 | #endif |
| 2056 | |
| 2057 | /* Default service name for PANU role */ |
| 2058 | #ifndef PAN_PANU_DEFAULT_SERVICE_NAME |
| 2059 | #define PAN_PANU_DEFAULT_SERVICE_NAME "PAN User Service" |
| 2060 | #endif |
| 2061 | |
| 2062 | /* Default description for NAP role service */ |
| 2063 | #ifndef PAN_NAP_DEFAULT_DESCRIPTION |
| 2064 | #define PAN_NAP_DEFAULT_DESCRIPTION "Public NAP" |
| 2065 | #endif |
| 2066 | |
| 2067 | /* Default description for GN role service */ |
| 2068 | #ifndef PAN_GN_DEFAULT_DESCRIPTION |
| 2069 | #define PAN_GN_DEFAULT_DESCRIPTION "Widcomm GN" |
| 2070 | #endif |
| 2071 | |
| 2072 | /* Default description for PANU role service */ |
| 2073 | #ifndef PAN_PANU_DEFAULT_DESCRIPTION |
| 2074 | #define PAN_PANU_DEFAULT_DESCRIPTION "Laptop's PANU" |
| 2075 | #endif |
| 2076 | |
| 2077 | /* Default Security level for PANU role. */ |
| 2078 | #ifndef PAN_PANU_SECURITY_LEVEL |
| 2079 | #define PAN_PANU_SECURITY_LEVEL 0 |
| 2080 | #endif |
| 2081 | |
| 2082 | /* Default Security level for GN role. */ |
| 2083 | #ifndef PAN_GN_SECURITY_LEVEL |
| 2084 | #define PAN_GN_SECURITY_LEVEL 0 |
| 2085 | #endif |
| 2086 | |
| 2087 | /* Default Security level for NAP role. */ |
| 2088 | #ifndef PAN_NAP_SECURITY_LEVEL |
| 2089 | #define PAN_NAP_SECURITY_LEVEL 0 |
| 2090 | #endif |
| 2091 | |
| 2092 | |
| 2093 | |
| 2094 | |
| 2095 | /****************************************************************************** |
| 2096 | ** |
| 2097 | ** GAP |
| 2098 | ** |
| 2099 | ******************************************************************************/ |
| 2100 | |
| 2101 | #ifndef GAP_INCLUDED |
| 2102 | #define GAP_INCLUDED FALSE |
| 2103 | #endif |
| 2104 | |
| 2105 | /* This is set to enable use of GAP L2CAP connections. */ |
| 2106 | #ifndef GAP_CONN_INCLUDED |
| 2107 | #define GAP_CONN_INCLUDED TRUE |
| 2108 | #endif |
| 2109 | |
| 2110 | /* This is set to enable posting event for data write */ |
| 2111 | #ifndef GAP_CONN_POST_EVT_INCLUDED |
| 2112 | #define GAP_CONN_POST_EVT_INCLUDED FALSE |
| 2113 | #endif |
| 2114 | |
| 2115 | /* The maximum number of simultaneous GAP L2CAP connections. */ |
| 2116 | #ifndef GAP_MAX_CONNECTIONS |
| 2117 | #define GAP_MAX_CONNECTIONS 8 |
| 2118 | #endif |
| 2119 | |
| 2120 | /****************************************************************************** |
| 2121 | ** |
| 2122 | ** CTP |
| 2123 | ** |
| 2124 | ******************************************************************************/ |
| 2125 | |
| 2126 | #ifndef CTP_INCLUDED |
| 2127 | #define CTP_INCLUDED FALSE |
| 2128 | #endif |
| 2129 | |
| 2130 | /* To include CTP gateway functionality or not. */ |
| 2131 | #ifndef CTP_GW_INCLUDED |
| 2132 | #define CTP_GW_INCLUDED TRUE |
| 2133 | #endif |
| 2134 | |
| 2135 | /* The number of terminals supported. */ |
| 2136 | #ifndef CTP_MAX_NUM_TLS |
| 2137 | #define CTP_MAX_NUM_TLS 7 |
| 2138 | #endif |
| 2139 | |
| 2140 | /* If the controller can not support sniff mode when the SCO is up, set this to FALSE. */ |
| 2141 | #ifndef CTP_USE_SNIFF_ON_SCO |
| 2142 | #define CTP_USE_SNIFF_ON_SCO FALSE |
| 2143 | #endif |
| 2144 | |
| 2145 | /* When ACL link between TL and GW is idle for more than this amount of seconds, the ACL may be put to low power mode. */ |
| 2146 | #ifndef CTP_TL_IDLE_TIMEOUT |
| 2147 | #define CTP_TL_IDLE_TIMEOUT 90 |
| 2148 | #endif |
| 2149 | |
| 2150 | /* To include CTP terminal functionality or not. */ |
| 2151 | #ifndef CTP_TL_INCLUDED |
| 2152 | #define CTP_TL_INCLUDED TRUE |
| 2153 | #endif |
| 2154 | |
| 2155 | /* To include CTP device discovery functionality or not. */ |
| 2156 | #ifndef CTP_DISCOVERY_INCLUDED |
| 2157 | #define CTP_DISCOVERY_INCLUDED TRUE |
| 2158 | #endif |
| 2159 | |
| 2160 | /* set to TRUE for controllers that do not support multi-point */ |
| 2161 | #ifndef CTP_TL_WAIT_DISC |
| 2162 | #define CTP_TL_WAIT_DISC TRUE |
| 2163 | #endif |
| 2164 | |
| 2165 | /* The CTP inquiry database size. */ |
| 2166 | #ifndef CTP_INQ_DB_SIZE |
| 2167 | #define CTP_INQ_DB_SIZE CTP_DISC_REC_SIZE |
| 2168 | #endif |
| 2169 | |
| 2170 | /* The CTP discovery record size. */ |
| 2171 | #ifndef CTP_DISC_REC_SIZE |
| 2172 | #define CTP_DISC_REC_SIZE 60 |
| 2173 | #endif |
| 2174 | |
| 2175 | /* CTP TL would try to re-establish L2CAP channel after channel is disconnected for this amount of seconds. */ |
| 2176 | #ifndef CTP_GUARD_LINK_LOST |
| 2177 | #define CTP_GUARD_LINK_LOST 1 |
| 2178 | #endif |
| 2179 | |
| 2180 | /* The link policy bitmap. */ |
| 2181 | #ifndef CTP_DEFAULT_LINK_POLICY |
| 2182 | #define CTP_DEFAULT_LINK_POLICY 0x000F |
| 2183 | #endif |
| 2184 | |
| 2185 | /* The minimum period interval used for the sniff and park modes. */ |
| 2186 | #ifndef CTP_DEF_LOWPWR_MIN_PERIOD |
| 2187 | #define CTP_DEF_LOWPWR_MIN_PERIOD 0x100 |
| 2188 | #endif |
| 2189 | |
| 2190 | /* The maximum period interval used for the sniff and park modes. */ |
| 2191 | #ifndef CTP_DEF_LOWPWR_MAX_PERIOD |
| 2192 | #define CTP_DEF_LOWPWR_MAX_PERIOD 0x1E0 |
| 2193 | #endif |
| 2194 | |
| 2195 | /* The number of baseband receive slot sniff attempts. */ |
| 2196 | #ifndef CTP_DEF_LOWPWR_ATTEMPT |
| 2197 | #define CTP_DEF_LOWPWR_ATTEMPT 0x200 |
| 2198 | #endif |
| 2199 | |
| 2200 | /* The number of baseband receive slots for sniff timeout. */ |
| 2201 | #ifndef CTP_DEF_LOWPWR_TIMEOUT |
| 2202 | #define CTP_DEF_LOWPWR_TIMEOUT 0x200 |
| 2203 | #endif |
| 2204 | |
| 2205 | /* This is set if CTP is to use park mode. */ |
| 2206 | #ifndef CTP_PARK_INCLUDED |
| 2207 | #define CTP_PARK_INCLUDED TRUE |
| 2208 | #endif |
| 2209 | |
| 2210 | /* This is set if CTP is to use sniff mode. */ |
| 2211 | #ifndef CTP_SNIFF_INCLUDED |
| 2212 | #define CTP_SNIFF_INCLUDED TRUE |
| 2213 | #endif |
| 2214 | |
| 2215 | /* To include CTP data exchange functionality or not. */ |
| 2216 | #ifndef CTP_DATA_EXCHG_FEATURE |
| 2217 | #define CTP_DATA_EXCHG_FEATURE FALSE |
| 2218 | #endif |
| 2219 | |
| 2220 | /* To include CTP GW intercom functionality or not. */ |
| 2221 | #ifndef CTP_GW_INTERCOM_FEATURE |
| 2222 | #define CTP_GW_INTERCOM_FEATURE FALSE |
| 2223 | #endif |
| 2224 | |
| 2225 | /* The MTU size for L2CAP channel. */ |
| 2226 | #ifndef CTP_MTU_SIZE |
| 2227 | #define CTP_MTU_SIZE 200 |
| 2228 | #endif |
| 2229 | |
| 2230 | /* The L2CAP PSM for the data exchange feature. */ |
| 2231 | #ifndef CTP_DATA_EXCHG_PSM |
| 2232 | #define CTP_DATA_EXCHG_PSM 13 |
| 2233 | #endif |
| 2234 | |
| 2235 | /* The flush timeout for L2CAP channels. */ |
| 2236 | #ifndef CTP_FLUSH_TO |
| 2237 | #define CTP_FLUSH_TO 0xFFFF |
| 2238 | #endif |
| 2239 | |
| 2240 | /* The default service name for CTP. */ |
| 2241 | #ifndef CTP_DEFAULT_SERVICE_NAME |
| 2242 | #define CTP_DEFAULT_SERVICE_NAME "Cordless Telephony" |
| 2243 | #endif |
| 2244 | |
| 2245 | /* The CTP security level. */ |
| 2246 | #ifndef CTP_SECURITY_LEVEL |
| 2247 | #define CTP_SECURITY_LEVEL (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT) |
| 2248 | #endif |
| 2249 | |
| 2250 | /* The number of lines to the external network. */ |
| 2251 | #ifndef CTP_MAX_LINES |
| 2252 | #define CTP_MAX_LINES 1 |
| 2253 | #endif |
| 2254 | |
| 2255 | /* Test if the number of resources in TCS is consistent with CTP setting. */ |
| 2256 | #ifndef CTP_TEST_FULL_TCS |
| 2257 | #define CTP_TEST_FULL_TCS TRUE |
| 2258 | #endif |
| 2259 | |
| 2260 | /* The default inquiry mode. */ |
| 2261 | #ifndef CTP_DEFAULT_INQUIRY_MODE |
| 2262 | #define CTP_DEFAULT_INQUIRY_MODE BTM_GENERAL_INQUIRY |
| 2263 | #endif |
| 2264 | |
| 2265 | /* The default inquiry duration. */ |
| 2266 | #ifndef CTP_DEFAULT_INQ_DURATION |
| 2267 | #define CTP_DEFAULT_INQ_DURATION 4 |
| 2268 | #endif |
| 2269 | |
| 2270 | /* The maximum number of inquiry responses. */ |
| 2271 | #ifndef CTP_DEFAULT_INQ_MAX_RESP |
| 2272 | #define CTP_DEFAULT_INQ_MAX_RESP 3 |
| 2273 | #endif |
| 2274 | |
| 2275 | /* When TL does not create another L2CAP channel within this period of time GW declares that it's "Connected Limited". */ |
| 2276 | #ifndef CTP_TL_CONN_TIMEOUT |
| 2277 | #define CTP_TL_CONN_TIMEOUT 5 |
| 2278 | #endif |
| 2279 | |
| 2280 | /* The delay for ACL to completely disconnect (for intercom) before sending the connect request to GW. */ |
| 2281 | #ifndef CTP_RECONNECT_DELAY |
| 2282 | #define CTP_RECONNECT_DELAY 5 |
| 2283 | #endif |
| 2284 | |
| 2285 | /* How many times to retry connection when it has failed. */ |
| 2286 | #ifndef CTP_RETRY_ON_CONN_ERR |
| 2287 | #define CTP_RETRY_ON_CONN_ERR 5 |
| 2288 | #endif |
| 2289 | |
| 2290 | /****************************************************************************** |
| 2291 | ** |
| 2292 | ** ICP |
| 2293 | ** |
| 2294 | ******************************************************************************/ |
| 2295 | |
| 2296 | #ifndef ICP_INCLUDED |
| 2297 | #define ICP_INCLUDED FALSE |
| 2298 | #endif |
| 2299 | |
| 2300 | /* The ICP default MTU. */ |
| 2301 | #ifndef ICP_MTU_SIZE |
| 2302 | #define ICP_MTU_SIZE 100 |
| 2303 | #endif |
| 2304 | |
| 2305 | /* The ICP security level. */ |
| 2306 | #ifndef ICP_SECURITY_LEVEL |
| 2307 | #define ICP_SECURITY_LEVEL BTM_SEC_NONE |
| 2308 | #endif |
| 2309 | |
| 2310 | /* The default service name for ICP. */ |
| 2311 | #ifndef ICP_DEFAULT_SERVICE_NAME |
| 2312 | #define ICP_DEFAULT_SERVICE_NAME "Intercom" |
| 2313 | #endif |
| 2314 | |
| 2315 | /* The flush timeout for L2CAP channels. */ |
| 2316 | #ifndef ICP_FLUSH_TO |
| 2317 | #define ICP_FLUSH_TO 0xFFFF |
| 2318 | #endif |
| 2319 | |
| 2320 | /****************************************************************************** |
| 2321 | ** |
| 2322 | ** SPP |
| 2323 | ** |
| 2324 | ******************************************************************************/ |
| 2325 | |
| 2326 | #ifndef SPP_INCLUDED |
| 2327 | #define SPP_INCLUDED FALSE |
| 2328 | #endif |
| 2329 | |
| 2330 | /* The SPP default MTU. */ |
| 2331 | #ifndef SPP_DEFAULT_MTU |
| 2332 | #define SPP_DEFAULT_MTU 127 |
| 2333 | #endif |
| 2334 | |
| 2335 | /* The interval, in seconds, that a client tries to reconnect to a service. */ |
| 2336 | #ifndef SPP_RETRY_CONN_INTERVAL |
| 2337 | #define SPP_RETRY_CONN_INTERVAL 1 |
| 2338 | #endif |
| 2339 | |
| 2340 | /* The SPP discoverable mode: limited or general. */ |
| 2341 | #ifndef SPP_DISCOVERABLE_MODE |
| 2342 | #define SPP_DISCOVERABLE_MODE BTM_GENERAL_DISCOVERABLE |
| 2343 | #endif |
| 2344 | |
| 2345 | /* The maximum number of inquiry results returned in by inquiry procedure. */ |
| 2346 | #ifndef SPP_DEF_INQ_MAX_RESP |
| 2347 | #define SPP_DEF_INQ_MAX_RESP 10 |
| 2348 | #endif |
| 2349 | |
| 2350 | /* The SPP discovery record size. */ |
| 2351 | #ifndef SPP_DISC_REC_SIZE |
| 2352 | #define SPP_DISC_REC_SIZE 60 |
| 2353 | #endif |
| 2354 | |
| 2355 | #ifndef SPP_MAX_RECS_PER_DEVICE |
| 2356 | #define SPP_MAX_RECS_PER_DEVICE (SPP_DB_SIZE / SPP_DISC_REC_SIZE) |
| 2357 | #endif |
| 2358 | |
| 2359 | /* Inquiry duration in 1.28 second units. */ |
| 2360 | #ifndef SPP_DEF_INQ_DURATION |
| 2361 | #define SPP_DEF_INQ_DURATION 9 |
| 2362 | #endif |
| 2363 | |
| 2364 | /* keep the raw data received from SDP server in database. */ |
| 2365 | #ifndef SDP_RAW_DATA_INCLUDED |
| 2366 | #define SDP_RAW_DATA_INCLUDED FALSE |
| 2367 | #endif |
| 2368 | |
| 2369 | /* TRUE, to allow JV to create L2CAP connection on SDP PSM. */ |
| 2370 | #ifndef SDP_FOR_JV_INCLUDED |
| 2371 | #define SDP_FOR_JV_INCLUDED FALSE |
| 2372 | #endif |
| 2373 | |
| 2374 | /* Inquiry duration in 1.28 second units. */ |
| 2375 | #ifndef SDP_DEBUG |
| 2376 | #define SDP_DEBUG TRUE |
| 2377 | #endif |
| 2378 | |
| 2379 | /****************************************************************************** |
| 2380 | ** |
| 2381 | ** HSP2, HFP |
| 2382 | ** |
| 2383 | ******************************************************************************/ |
| 2384 | |
| 2385 | #ifndef HSP2_INCLUDED |
| 2386 | #define HSP2_INCLUDED FALSE |
| 2387 | #endif |
| 2388 | |
| 2389 | /* Include the ability to perform inquiry for peer devices. */ |
| 2390 | #ifndef HSP2_INQUIRY_INCLUDED |
| 2391 | #define HSP2_INQUIRY_INCLUDED TRUE |
| 2392 | #endif |
| 2393 | |
| 2394 | /* Include Audio Gateway specific code. */ |
| 2395 | #ifndef HSP2_AG_INCLUDED |
| 2396 | #define HSP2_AG_INCLUDED TRUE |
| 2397 | #endif |
| 2398 | |
| 2399 | /* Include Headset Specific Code. */ |
| 2400 | #ifndef HSP2_HS_INCLUDED |
| 2401 | #define HSP2_HS_INCLUDED TRUE |
| 2402 | #endif |
| 2403 | |
| 2404 | /* Include the ability to open an SCO connection for In-Band Ringing. */ |
| 2405 | #ifndef HSP2_IB_RING_INCLUDED |
| 2406 | #define HSP2_IB_RING_INCLUDED TRUE |
| 2407 | #endif |
| 2408 | |
| 2409 | /* Include the ability to repeat a ring. */ |
| 2410 | #ifndef HSP2_AG_REPEAT_RING |
| 2411 | #define HSP2_AG_REPEAT_RING TRUE |
| 2412 | #endif |
| 2413 | |
| 2414 | #ifndef HSP2_APP_CLOSES_ON_CKPD |
| 2415 | #define HSP2_APP_CLOSES_ON_CKPD FALSE |
| 2416 | #endif |
| 2417 | |
| 2418 | |
| 2419 | /* Include the ability to park a connection. */ |
| 2420 | #ifndef HSP2_PARK_INCLUDED |
| 2421 | #define HSP2_PARK_INCLUDED TRUE |
| 2422 | #endif |
| 2423 | |
| 2424 | /* Include HSP State Machine debug trace messages. */ |
| 2425 | #ifndef HSP2_FSM_DEBUG |
| 2426 | #define HSP2_FSM_DEBUG TRUE |
| 2427 | #endif |
| 2428 | |
| 2429 | /* The Module's Inquiry Scan Window. */ |
| 2430 | #ifndef HSP2_INQ_SCAN_WINDOW |
| 2431 | #define HSP2_INQ_SCAN_WINDOW 0 |
| 2432 | #endif |
| 2433 | |
| 2434 | /* The Module's Inquiry Scan Interval. */ |
| 2435 | #ifndef HSP2_INQ_SCAN_INTERVAL |
| 2436 | #define HSP2_INQ_SCAN_INTERVAL 0 |
| 2437 | #endif |
| 2438 | |
| 2439 | /* The Module's Page Scan Interval. */ |
| 2440 | #ifndef HSP2_PAGE_SCAN_INTERVAL |
| 2441 | #define HSP2_PAGE_SCAN_INTERVAL 0 |
| 2442 | #endif |
| 2443 | |
| 2444 | /* The Module's Page Scan Window. */ |
| 2445 | #ifndef HSP2_PAGE_SCAN_WINDOW |
| 2446 | #define HSP2_PAGE_SCAN_WINDOW 0 |
| 2447 | #endif |
| 2448 | |
| 2449 | /* The Park Mode's Minimum Beacon Period. */ |
| 2450 | #ifndef HSP2_BEACON_MIN_PERIOD |
| 2451 | #define HSP2_BEACON_MIN_PERIOD 450 |
| 2452 | #endif |
| 2453 | |
| 2454 | /* The Park Mode's Maximum Beacon Period. */ |
| 2455 | #ifndef HSP2_BEACON_MAX_PERIOD |
| 2456 | #define HSP2_BEACON_MAX_PERIOD 500 |
| 2457 | #endif |
| 2458 | |
| 2459 | /* The duration of the inquiry in seconds. */ |
| 2460 | #ifndef HSP2_INQ_DURATION |
| 2461 | #define HSP2_INQ_DURATION 4 |
| 2462 | #endif |
| 2463 | |
| 2464 | /* Maximum number of peer responses during an inquiry. */ |
| 2465 | #ifndef HSP2_INQ_MAX_NUM_RESPS |
| 2466 | #define HSP2_INQ_MAX_NUM_RESPS 3 |
| 2467 | #endif |
| 2468 | |
| 2469 | /* Maximum number of times to retry an inquiry prior to failure. */ |
| 2470 | #ifndef HSP2_MAX_INQ_RETRY |
| 2471 | #define HSP2_MAX_INQ_RETRY 6 |
| 2472 | #endif |
| 2473 | |
| 2474 | /* Maximum number of times to retry an RFCOMM connection prior to failure. */ |
| 2475 | #ifndef HSP2_MAX_CONN_RETRY |
| 2476 | #define HSP2_MAX_CONN_RETRY 3 |
| 2477 | #endif |
| 2478 | |
| 2479 | /* If the connect request failed for authentication reasons, do not retry */ |
| 2480 | #ifndef HSP2_NO_RETRY_ON_AUTH_FAIL |
| 2481 | #define HSP2_NO_RETRY_ON_AUTH_FAIL TRUE |
| 2482 | #endif |
| 2483 | |
| 2484 | /* Maximum number of characters in an HSP2 device name. */ |
| 2485 | #ifndef HSP2_MAX_NAME_LEN |
| 2486 | #define HSP2_MAX_NAME_LEN 32 |
| 2487 | #endif |
| 2488 | |
| 2489 | /* The minimum speaker and/or microphone gain setting. */ |
| 2490 | #ifndef HSP2_MIN_GAIN |
| 2491 | #define HSP2_MIN_GAIN 0 |
| 2492 | #endif |
| 2493 | |
| 2494 | /* The maximum speaker and/or microphone setting. */ |
| 2495 | #ifndef HSP2_MAX_GAIN |
| 2496 | #define HSP2_MAX_GAIN 15 |
| 2497 | #endif |
| 2498 | |
| 2499 | /* The default value to send on an AT+CKPD. */ |
| 2500 | #ifndef HSP2_KEYPRESS_DEFAULT |
| 2501 | #define HSP2_KEYPRESS_DEFAULT 200 |
| 2502 | #endif |
| 2503 | |
| 2504 | /* Maximum amount a data that can be received per RFCOMM frame. */ |
| 2505 | #ifndef HSP2_MAX_RFC_READ_LEN |
| 2506 | #define HSP2_MAX_RFC_READ_LEN 128 |
| 2507 | #endif |
| 2508 | |
| 2509 | /* The time in seconds to wait for completion of a partial AT command or response from the peer. */ |
| 2510 | #ifndef HSP2_AT_TO_INTERVAL |
| 2511 | #define HSP2_AT_TO_INTERVAL 30 |
| 2512 | #endif |
| 2513 | |
| 2514 | /* The time to wait before repeating a ring to a peer Headset. */ |
| 2515 | #ifndef HSP2_REPEAT_RING_TO |
| 2516 | #define HSP2_REPEAT_RING_TO 4 |
| 2517 | #endif |
| 2518 | |
| 2519 | /* Time to wait for a response for an AT command */ |
| 2520 | #ifndef HSP2_AT_RSP_TO |
| 2521 | #define HSP2_AT_RSP_TO 20 |
| 2522 | #endif |
| 2523 | |
| 2524 | /* SCO packet type(s) to use (bitmask: see spec), 0 - device default (recommended) */ |
| 2525 | #ifndef HSP2_SCO_PKT_TYPES |
| 2526 | #define HSP2_SCO_PKT_TYPES ((UINT16)0x0000) |
| 2527 | #endif |
| 2528 | |
| 2529 | /* The default settings of the SCO voice link. */ |
| 2530 | #ifndef HSP2_DEFAULT_VOICE_SETTINGS |
| 2531 | #define HSP2_DEFAULT_VOICE_SETTINGS (HCI_INP_CODING_LINEAR | HCI_INP_DATA_FMT_2S_COMPLEMENT | HCI_INP_SAMPLE_SIZE_16BIT | HCI_AIR_CODING_FORMAT_CVSD) |
| 2532 | #endif |
| 2533 | |
| 2534 | #ifndef HSP2_MAX_AT_CMD_LENGTH |
| 2535 | #define HSP2_MAX_AT_CMD_LENGTH 16 |
| 2536 | #endif |
| 2537 | |
| 2538 | #ifndef HSP2_MAX_AT_VAL_LENGTH |
| 2539 | #if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE) |
| 2540 | #define HSP2_MAX_AT_VAL_LENGTH 310 |
| 2541 | #else |
| 2542 | #define HSP2_MAX_AT_VAL_LENGTH 5 |
| 2543 | #endif |
| 2544 | #endif |
| 2545 | |
| 2546 | |
| 2547 | #ifndef HSP2_SDP_DB_SIZE |
| 2548 | #define HSP2_SDP_DB_SIZE 300 |
| 2549 | #endif |
| 2550 | |
| 2551 | |
| 2552 | /****************************************************************************** |
| 2553 | ** |
| 2554 | ** HFP |
| 2555 | ** |
| 2556 | ******************************************************************************/ |
| 2557 | |
| 2558 | #ifndef HFP_INCLUDED |
| 2559 | #define HFP_INCLUDED FALSE |
| 2560 | #endif |
| 2561 | |
| 2562 | /* Include Audio Gateway specific code. */ |
| 2563 | #ifndef HFP_AG_INCLUDED |
| 2564 | #define HFP_AG_INCLUDED TRUE |
| 2565 | #endif |
| 2566 | |
| 2567 | /* Include Hand Free Specific Code. */ |
| 2568 | #ifndef HFP_HF_INCLUDED |
| 2569 | #define HFP_HF_INCLUDED TRUE |
| 2570 | #endif |
| 2571 | |
| 2572 | /* Use AT interface instead of full blown API */ |
| 2573 | #ifndef AT_INTERFACE |
| 2574 | #define AT_INTERFACE FALSE |
| 2575 | #endif |
| 2576 | |
| 2577 | /* HFP Manages SCO establishement for various procedures */ |
| 2578 | #ifndef HFP_SCO_MGMT_INCLUDED |
| 2579 | #define HFP_SCO_MGMT_INCLUDED TRUE |
| 2580 | #endif |
| 2581 | |
| 2582 | /* CCAP compliant features and behavior desired */ |
| 2583 | #ifndef CCAP_COMPLIANCE |
| 2584 | #define CCAP_COMPLIANCE TRUE |
| 2585 | #endif |
| 2586 | |
| 2587 | /* Caller ID string, part of +CLIP result code */ |
| 2588 | #ifndef HFP_MAX_CLIP_INFO |
| 2589 | #define HFP_MAX_CLIP_INFO 45 |
| 2590 | #endif |
| 2591 | |
| 2592 | #ifndef HFP_RPT_PEER_INFO_INCLUDED |
| 2593 | #define HFP_RPT_PEER_INFO_INCLUDED TRUE /* Reporting of peer features enabled */ |
| 2594 | #endif |
| 2595 | |
| 2596 | /****************************************************************************** |
| 2597 | ** |
| 2598 | ** HID |
| 2599 | ** |
| 2600 | ******************************************************************************/ |
| 2601 | |
| 2602 | /* HID Device Role Included */ |
| 2603 | #ifndef HID_DEV_INCLUDED |
| 2604 | #define HID_DEV_INCLUDED FALSE |
| 2605 | #endif |
| 2606 | |
| 2607 | #ifndef HID_DEV_PM_INCLUDED |
| 2608 | #define HID_DEV_PM_INCLUDED TRUE |
| 2609 | #endif |
| 2610 | |
| 2611 | /* The HID Device is a virtual cable */ |
| 2612 | #ifndef HID_DEV_VIRTUAL_CABLE |
| 2613 | #define HID_DEV_VIRTUAL_CABLE TRUE |
| 2614 | #endif |
| 2615 | |
| 2616 | /* The HID device initiates the reconnections */ |
| 2617 | #ifndef HID_DEV_RECONN_INITIATE |
| 2618 | #define HID_DEV_RECONN_INITIATE TRUE |
| 2619 | #endif |
| 2620 | |
| 2621 | /* THe HID device is normally connectable */ |
| 2622 | #ifndef HID_DEV_NORMALLY_CONN |
| 2623 | #define HID_DEV_NORMALLY_CONN FALSE |
| 2624 | #endif |
| 2625 | |
| 2626 | /* The device is battery powered */ |
| 2627 | #ifndef HID_DEV_BATTERY_POW |
| 2628 | #define HID_DEV_BATTERY_POW TRUE |
| 2629 | #endif |
| 2630 | |
| 2631 | /* Device is capable of waking up the host */ |
| 2632 | #ifndef HID_DEV_REMOTE_WAKE |
| 2633 | #define HID_DEV_REMOTE_WAKE TRUE |
| 2634 | #endif |
| 2635 | |
| 2636 | /* Device needs host to close SDP channel after SDP is over */ |
| 2637 | #ifndef HID_DEV_SDP_DISABLE |
| 2638 | #define HID_DEV_SDP_DISABLE TRUE |
| 2639 | #endif |
| 2640 | |
| 2641 | #ifndef HID_DEV_MTU_SIZE |
| 2642 | #define HID_DEV_MTU_SIZE 64 |
| 2643 | #endif |
| 2644 | |
| 2645 | #ifndef HID_DEV_FLUSH_TO |
| 2646 | #define HID_DEV_FLUSH_TO 0xffff |
| 2647 | #endif |
| 2648 | |
| 2649 | #ifndef HID_DEV_PAGE_SCAN_WIN |
| 2650 | #define HID_DEV_PAGE_SCAN_WIN (0) |
| 2651 | #endif |
| 2652 | |
| 2653 | #ifndef HID_DEV_PAGE_SCAN_INT |
| 2654 | #define HID_DEV_PAGE_SCAN_INT (0) |
| 2655 | #endif |
| 2656 | |
| 2657 | #ifndef HID_DEV_MAX_CONN_RETRY |
| 2658 | #define HID_DEV_MAX_CONN_RETRY (15) |
| 2659 | #endif |
| 2660 | |
| 2661 | #ifndef HID_DEV_REPAGE_WIN |
| 2662 | #define HID_DEV_REPAGE_WIN (1) |
| 2663 | #endif |
| 2664 | |
| 2665 | #ifndef HID_DEV_SVC_NAME |
| 2666 | #define HID_DEV_SVC_NAME "HID" |
| 2667 | #endif |
| 2668 | |
| 2669 | #ifndef HID_DEV_SVC_DESCR |
| 2670 | #define HID_DEV_SVC_DESCR "3-button mouse and keyboard" |
| 2671 | #endif |
| 2672 | |
| 2673 | #ifndef HID_DEV_PROVIDER_NAME |
| 2674 | #define HID_DEV_PROVIDER_NAME "Widcomm" |
| 2675 | #endif |
| 2676 | |
| 2677 | #ifndef HID_DEV_REL_NUM |
| 2678 | #define HID_DEV_REL_NUM 0x0100 |
| 2679 | #endif |
| 2680 | |
| 2681 | #ifndef HID_DEV_PARSER_VER |
| 2682 | #define HID_DEV_PARSER_VER 0x0111 |
| 2683 | #endif |
| 2684 | |
| 2685 | #ifndef HID_DEV_SUBCLASS |
| 2686 | #define HID_DEV_SUBCLASS COD_MINOR_POINTING |
| 2687 | #endif |
| 2688 | |
| 2689 | #ifndef HID_DEV_COUNTRY_CODE |
| 2690 | #define HID_DEV_COUNTRY_CODE 0x33 |
| 2691 | #endif |
| 2692 | |
| 2693 | #ifndef HID_DEV_SUP_TOUT |
| 2694 | #define HID_DEV_SUP_TOUT 0x8000 |
| 2695 | #endif |
| 2696 | |
| 2697 | #ifndef HID_DEV_NUM_LANGS |
| 2698 | #define HID_DEV_NUM_LANGS 1 |
| 2699 | #endif |
| 2700 | |
| 2701 | #ifndef HID_DEV_INACT_TIMEOUT |
| 2702 | #define HID_DEV_INACT_TIMEOUT 60 |
| 2703 | #endif |
| 2704 | |
| 2705 | #ifndef HID_DEV_BUSY_MODE_PARAMS |
| 2706 | #define HID_DEV_BUSY_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_ACTIVE } |
| 2707 | #endif |
| 2708 | |
| 2709 | #ifndef HID_DEV_IDLE_MODE_PARAMS |
| 2710 | #define HID_DEV_IDLE_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_SNIFF } |
| 2711 | #endif |
| 2712 | |
| 2713 | #ifndef HID_DEV_SUSP_MODE_PARAMS |
| 2714 | #define HID_DEV_SUSP_MODE_PARAMS { 640, 320, 0, 0, HCI_MODE_PARK } |
| 2715 | #endif |
| 2716 | |
| 2717 | #ifndef HID_DEV_MAX_DESCRIPTOR_SIZE |
| 2718 | #define HID_DEV_MAX_DESCRIPTOR_SIZE 128 /* Max descriptor size */ |
| 2719 | #endif |
| 2720 | |
| 2721 | #ifndef HID_DEV_LANGUAGELIST |
| 2722 | #define HID_DEV_LANGUAGELIST {0x35, 0x06, 0x09, 0x04, 0x09, 0x09, 0x01, 0x00} |
| 2723 | #endif |
| 2724 | |
| 2725 | #ifndef HID_DEV_LINK_SUPERVISION_TO |
| 2726 | #define HID_DEV_LINK_SUPERVISION_TO 0x8000 |
| 2727 | #endif |
| 2728 | |
| 2729 | #ifndef HID_CONTROL_POOL_ID |
| 2730 | #define HID_CONTROL_POOL_ID 2 |
| 2731 | #endif |
| 2732 | |
| 2733 | #ifndef HID_INTERRUPT_POOL_ID |
| 2734 | #define HID_INTERRUPT_POOL_ID 2 |
| 2735 | #endif |
| 2736 | |
| 2737 | #ifndef UCD_HID_INCLUDED |
| 2738 | #define UCD_HID_INCLUDED FALSE |
| 2739 | #endif |
| 2740 | |
| 2741 | #ifndef BRR_HID_INCLUDED |
| 2742 | #define BRR_HID_INCLUDED FALSE |
| 2743 | #endif |
| 2744 | |
| 2745 | /************************************************************************* |
| 2746 | ** Definitions for Both HID-Host & Device |
| 2747 | */ |
| 2748 | #ifndef HID_MAX_SVC_NAME_LEN |
| 2749 | #define HID_MAX_SVC_NAME_LEN 32 |
| 2750 | #endif |
| 2751 | |
| 2752 | #ifndef HID_MAX_SVC_DESCR_LEN |
| 2753 | #define HID_MAX_SVC_DESCR_LEN 32 |
| 2754 | #endif |
| 2755 | |
| 2756 | #ifndef HID_MAX_PROV_NAME_LEN |
| 2757 | #define HID_MAX_PROV_NAME_LEN 32 |
| 2758 | #endif |
| 2759 | |
| 2760 | /************************************************************************* |
| 2761 | ** Definitions for HID-Host |
| 2762 | */ |
| 2763 | #ifndef HID_HOST_INCLUDED |
| 2764 | #define HID_HOST_INCLUDED FALSE |
| 2765 | #endif |
| 2766 | |
| 2767 | #ifndef HID_HOST_MAX_DEVICES |
| 2768 | #define HID_HOST_MAX_DEVICES 7 |
| 2769 | #endif |
| 2770 | |
| 2771 | #ifndef HID_HOST_MTU |
| 2772 | #define HID_HOST_MTU 640 |
| 2773 | #endif |
| 2774 | |
| 2775 | #ifndef HID_HOST_FLUSH_TO |
| 2776 | #define HID_HOST_FLUSH_TO 0xffff |
| 2777 | #endif |
| 2778 | |
| 2779 | #ifndef HID_HOST_MAX_CONN_RETRY |
| 2780 | #define HID_HOST_MAX_CONN_RETRY (15) |
| 2781 | #endif |
| 2782 | |
| 2783 | #ifndef HID_HOST_REPAGE_WIN |
| 2784 | #define HID_HOST_REPAGE_WIN (2) |
| 2785 | #endif |
| 2786 | |
| 2787 | |
| 2788 | /****************************************************************************** |
| 2789 | ** |
| 2790 | ** DUN and FAX |
| 2791 | ** |
| 2792 | ******************************************************************************/ |
| 2793 | |
| 2794 | #ifndef DUN_INCLUDED |
| 2795 | #define DUN_INCLUDED FALSE |
| 2796 | #endif |
| 2797 | |
| 2798 | |
| 2799 | /****************************************************************************** |
| 2800 | ** |
| 2801 | ** GOEP |
| 2802 | ** |
| 2803 | ******************************************************************************/ |
| 2804 | |
| 2805 | #ifndef GOEP_INCLUDED |
| 2806 | #define GOEP_INCLUDED FALSE |
| 2807 | #endif |
| 2808 | |
| 2809 | /* This is set to enable GOEP non-blocking file system access functions. */ |
| 2810 | #ifndef GOEP_FS_INCLUDED |
| 2811 | #define GOEP_FS_INCLUDED TRUE |
| 2812 | #endif |
| 2813 | |
| 2814 | /* GOEP authentication key size. */ |
| 2815 | #ifndef GOEP_MAX_AUTH_KEY_SIZE |
| 2816 | #define GOEP_MAX_AUTH_KEY_SIZE 16 |
| 2817 | #endif |
| 2818 | |
| 2819 | /* Maximum size of the realm authentication string. */ |
| 2820 | #ifndef GOEP_MAX_AUTH_REALM_SIZE |
| 2821 | #define GOEP_MAX_AUTH_REALM_SIZE 16 |
| 2822 | #endif |
| 2823 | |
| 2824 | /* Realm Character Set */ |
| 2825 | #ifndef GOEP_REALM_CHARSET |
| 2826 | #define GOEP_REALM_CHARSET 0 /* ASCII */ |
| 2827 | #endif |
| 2828 | |
| 2829 | /* This is set to the maximum length of path name allowed in the system (_MAX_PATH). */ |
| 2830 | #ifndef GOEP_MAX_PATH_SIZE |
| 2831 | #define GOEP_MAX_PATH_SIZE 255 |
| 2832 | #endif |
| 2833 | |
| 2834 | /* Specifies whether or not client's user id is required during obex authentication */ |
| 2835 | #ifndef GOEP_SERVER_USERID_REQUIRED |
| 2836 | #define GOEP_SERVER_USERID_REQUIRED FALSE |
| 2837 | #endif |
| 2838 | |
| 2839 | /* This is set to the maximum length of file name allowed in the system (_MAX_FNAME). */ |
| 2840 | #ifndef GOEP_MAX_FILE_SIZE |
| 2841 | #define GOEP_MAX_FILE_SIZE 128 |
| 2842 | #endif |
| 2843 | |
| 2844 | /* Character used as path separator */ |
| 2845 | #ifndef GOEP_PATH_SEPARATOR |
| 2846 | #define GOEP_PATH_SEPARATOR ((char) 0x5c) /* 0x2f ('/'), or 0x5c ('\') */ |
| 2847 | #endif |
| 2848 | |
| 2849 | /****************************************************************************** |
| 2850 | ** |
| 2851 | ** OPP |
| 2852 | ** |
| 2853 | ******************************************************************************/ |
| 2854 | |
| 2855 | #ifndef OPP_INCLUDED |
| 2856 | #define OPP_INCLUDED FALSE |
| 2857 | #endif |
| 2858 | |
| 2859 | /* This is set to enable OPP client capabilities. */ |
| 2860 | #ifndef OPP_CLIENT_INCLUDED |
| 2861 | #define OPP_CLIENT_INCLUDED FALSE |
| 2862 | #endif |
| 2863 | |
| 2864 | /* This is set to enable OPP server capabilities. */ |
| 2865 | #ifndef OPP_SERVER_INCLUDED |
| 2866 | #define OPP_SERVER_INCLUDED FALSE |
| 2867 | #endif |
| 2868 | |
| 2869 | /* if the optional formating functions are to be included or not */ |
| 2870 | #ifndef OPP_FORMAT_INCLUDED |
| 2871 | #define OPP_FORMAT_INCLUDED FALSE |
| 2872 | #endif |
| 2873 | |
| 2874 | /* Maximum number of client sessions allowed by server */ |
| 2875 | #ifndef OPP_MAX_SRVR_SESS |
| 2876 | #define OPP_MAX_SRVR_SESS 3 |
| 2877 | #endif |
| 2878 | |
| 2879 | /****************************************************************************** |
| 2880 | ** |
| 2881 | ** FTP |
| 2882 | ** |
| 2883 | ******************************************************************************/ |
| 2884 | |
| 2885 | #ifndef FTP_INCLUDED |
| 2886 | #define FTP_INCLUDED FALSE |
| 2887 | #endif |
| 2888 | |
| 2889 | /* This is set to enable FTP client capabilities. */ |
| 2890 | #ifndef FTP_CLIENT_INCLUDED |
| 2891 | #define FTP_CLIENT_INCLUDED TRUE |
| 2892 | #endif |
| 2893 | |
| 2894 | /* This is set to enable FTP server capabilities. */ |
| 2895 | #ifndef FTP_SERVER_INCLUDED |
| 2896 | #define FTP_SERVER_INCLUDED TRUE |
| 2897 | #endif |
| 2898 | |
| 2899 | /****************************************************************************** |
| 2900 | ** |
| 2901 | ** XML Parser |
| 2902 | ** |
| 2903 | ******************************************************************************/ |
| 2904 | |
| 2905 | #ifndef XML_STACK_SIZE |
| 2906 | #define XML_STACK_SIZE 7 |
| 2907 | #endif |
| 2908 | |
| 2909 | /****************************************************************************** |
| 2910 | ** |
| 2911 | ** BPP Printer |
| 2912 | ** |
| 2913 | ******************************************************************************/ |
| 2914 | #ifndef BPP_DEBUG |
| 2915 | #define BPP_DEBUG FALSE |
| 2916 | #endif |
| 2917 | |
| 2918 | #ifndef BPP_INCLUDED |
| 2919 | #define BPP_INCLUDED FALSE |
| 2920 | #endif |
| 2921 | |
| 2922 | #ifndef BPP_SND_INCLUDED |
| 2923 | #define BPP_SND_INCLUDED FALSE |
| 2924 | #endif |
| 2925 | |
| 2926 | /* Maximum number of senders allowed to connect simultaneously |
| 2927 | ** The maximum is 6 or (OBX_NUM_SERVERS / 2), whichever is smaller |
| 2928 | */ |
| 2929 | #ifndef BPP_PR_MAX_CON |
| 2930 | #define BPP_PR_MAX_CON 3 |
| 2931 | #endif |
| 2932 | |
| 2933 | /* Service Name. maximum length: 248 |
| 2934 | #ifndef BPP_SERVICE_NAME |
| 2935 | #define BPP_SERVICE_NAME "Basic Printing" |
| 2936 | #endif |
| 2937 | */ |
| 2938 | /* Document Format Supported. ASCII comma-delimited list of MIME type:version string |
| 2939 | #ifndef BPP_DOC_FORMAT_SUPPORTED |
| 2940 | #define BPP_DOC_FORMAT_SUPPORTED "application/vnd.pwg-xhtml-print:1.0,application/vnd.hp-PCL:5E,application/PDF" |
| 2941 | #endif |
| 2942 | |
| 2943 | #ifndef BPP_DOC_FORMAT_SUPPORTED_LEN |
| 2944 | #define BPP_DOC_FORMAT_SUPPORTED_LEN 77 |
| 2945 | #endif |
| 2946 | */ |
| 2947 | /* Character repertoires. |
| 2948 | #ifndef BPP_CHARACTER_REPERTOIRES |
| 2949 | #define BPP_CHARACTER_REPERTOIRES {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01} |
| 2950 | #endif |
| 2951 | */ |
| 2952 | /* XHTML formats. |
| 2953 | #ifndef BPP_XHTML_PRINT_FORMATS |
| 2954 | #define BPP_XHTML_PRINT_FORMATS "image/gif:89A,image/jpeg" |
| 2955 | #endif |
| 2956 | |
| 2957 | #ifndef BPP_XHTML_PRINT_FORMATS_LEN |
| 2958 | #define BPP_XHTML_PRINT_FORMATS_LEN 24 |
| 2959 | #endif |
| 2960 | */ |
| 2961 | /* Color supported. |
| 2962 | #ifndef BPP_COLOR_SUPORTED |
| 2963 | #define BPP_COLOR_SUPORTED FALSE |
| 2964 | #endif |
| 2965 | */ |
| 2966 | /* 1284 ID string. First 2 bytes are the length. |
| 2967 | #ifndef BPP_1284ID |
| 2968 | #define BPP_1284ID "\x00\x48MANUFACTURER:ACME Manufacturing;COMMAND SET:PCL,MPL;MODEL:LaserBeam \?;" |
| 2969 | #endif |
| 2970 | |
| 2971 | #ifndef BPP_1284ID_LEN |
| 2972 | #define BPP_1284ID_LEN 72 |
| 2973 | #endif |
| 2974 | */ |
| 2975 | /* Printer name. |
| 2976 | #ifndef BPP_PRINTER_NAME |
| 2977 | #define BPP_PRINTER_NAME "My Printer" |
| 2978 | #endif |
| 2979 | |
| 2980 | #ifndef BPP_PRINTER_NAME_LEN |
| 2981 | #define BPP_PRINTER_NAME_LEN 10 |
| 2982 | #endif |
| 2983 | */ |
| 2984 | |
| 2985 | /* Printer location. |
| 2986 | #ifndef BPP_PRINTER_LOCATION |
| 2987 | #define BPP_PRINTER_LOCATION "Hotel Lobby" |
| 2988 | #endif |
| 2989 | |
| 2990 | #ifndef BPP_PRINTER_LOCATION_LEN |
| 2991 | #define BPP_PRINTER_LOCATION_LEN 11 |
| 2992 | #endif |
| 2993 | */ |
| 2994 | /* Duplex printing supported. |
| 2995 | #ifndef BPP_DUPLEX_SUPPORTED |
| 2996 | #define BPP_DUPLEX_SUPPORTED TRUE |
| 2997 | #endif |
| 2998 | */ |
| 2999 | |
| 3000 | /* Media types supported. |
| 3001 | #ifndef BPP_MEDIA_TYPES_SUPPORTED |
| 3002 | #define BPP_MEDIA_TYPES_SUPPORTED "stationary,continuous-long,photographic-high-gloss,cardstock" |
| 3003 | #endif |
| 3004 | |
| 3005 | #ifndef BPP_MEDIA_TYPES_SUPPORTED_LEN |
| 3006 | #define BPP_MEDIA_TYPES_SUPPORTED_LEN 60 |
| 3007 | #endif |
| 3008 | */ |
| 3009 | /* Maximum media with supported. |
| 3010 | #ifndef BPP_MAX_MEDIA_WIDTH |
| 3011 | #define BPP_MAX_MEDIA_WIDTH 205 |
| 3012 | #endif |
| 3013 | */ |
| 3014 | /* Maximum media length supported. |
| 3015 | #ifndef BPP_MAX_MEDIA_LENGTH |
| 3016 | #define BPP_MAX_MEDIA_LENGTH 285 |
| 3017 | #endif |
| 3018 | */ |
| 3019 | /* the maximum string len for the media size of medium loaded */ |
| 3020 | #ifndef BPP_MEDIA_SIZE_LEN |
| 3021 | #define BPP_MEDIA_SIZE_LEN 33 |
| 3022 | #endif |
| 3023 | |
| 3024 | /* Debug Trace the SOAP object, if TRUE */ |
| 3025 | #ifndef BPP_TRACE_XML |
| 3026 | #define BPP_TRACE_XML TRUE |
| 3027 | #endif |
| 3028 | |
| 3029 | /* in case that the SOAP object does not all come in one OBEX packet, |
| 3030 | * this size of data may be kept in the BPP control block for continuing parsing. |
| 3031 | * The maximum is the size of the biggest GKI buffer (GKI_MAX_BUF_SIZE) */ |
| 3032 | #ifndef BPP_SOAP_KEEP_SIZE |
| 3033 | #define BPP_SOAP_KEEP_SIZE 200 |
| 3034 | #endif |
| 3035 | |
| 3036 | |
| 3037 | /****************************************************************************** |
| 3038 | ** |
| 3039 | ** BIP |
| 3040 | ** |
| 3041 | ******************************************************************************/ |
| 3042 | #ifndef BIP_INCLUDED |
| 3043 | #define BIP_INCLUDED FALSE |
| 3044 | #endif |
| 3045 | |
| 3046 | /* TRUE to include imaging initiator */ |
| 3047 | #ifndef BIP_INITR_INCLUDED |
| 3048 | #define BIP_INITR_INCLUDED FALSE |
| 3049 | #endif |
| 3050 | |
| 3051 | /* TRUE to include imaging responder */ |
| 3052 | #ifndef BIP_RSPDR_INCLUDED |
| 3053 | #define BIP_RSPDR_INCLUDED FALSE |
| 3054 | #endif |
| 3055 | |
| 3056 | /* TRUE to include image push feature */ |
| 3057 | #ifndef BIP_PUSH_INCLUDED |
| 3058 | #define BIP_PUSH_INCLUDED TRUE |
| 3059 | #endif |
| 3060 | |
| 3061 | /* TRUE to include image pull feature */ |
| 3062 | #ifndef BIP_PULL_INCLUDED |
| 3063 | #define BIP_PULL_INCLUDED TRUE |
| 3064 | #endif |
| 3065 | |
| 3066 | /* TRUE to include advanced image printing feature */ |
| 3067 | #ifndef BIP_PRINTING_INCLUDED |
| 3068 | #define BIP_PRINTING_INCLUDED TRUE |
| 3069 | #endif |
| 3070 | |
| 3071 | /* TRUE to include automatic archive feature */ |
| 3072 | #ifndef BIP_ARCHIVE_INCLUDED |
| 3073 | #define BIP_ARCHIVE_INCLUDED TRUE |
| 3074 | #endif |
| 3075 | |
| 3076 | /* TRUE to include remote camera feature */ |
| 3077 | #ifndef BIP_CAMERA_INCLUDED |
| 3078 | #define BIP_CAMERA_INCLUDED TRUE |
| 3079 | #endif |
| 3080 | |
| 3081 | /* TRUE to include remote display feature */ |
| 3082 | #ifndef BIP_DISPLAY_INCLUDED |
| 3083 | #define BIP_DISPLAY_INCLUDED TRUE |
| 3084 | #endif |
| 3085 | |
| 3086 | /* TRUE to include sanity check code for API functions */ |
| 3087 | #ifndef BIP_SANITY_CHECKS |
| 3088 | #define BIP_SANITY_CHECKS TRUE |
| 3089 | #endif |
| 3090 | |
| 3091 | /* TRUE to show the received XML object in trace for conformance tests */ |
| 3092 | #ifndef BIP_TRACE_XML |
| 3093 | #define BIP_TRACE_XML TRUE |
| 3094 | #endif |
| 3095 | |
| 3096 | /* in case that the received XML object is not complete, the XML parser state machine needs |
| 3097 | * to keep a copy of the data from the last '<' |
| 3098 | * This macro specifies the maximun amount of data for this purpose */ |
| 3099 | #ifndef BIP_XML_CARRY_OVER_LEN |
| 3100 | #define BIP_XML_CARRY_OVER_LEN 100 |
| 3101 | #endif |
| 3102 | |
| 3103 | /* minimum 4, maximum is 255. The value should be set to the maximum size of encoding string + 1. JPEG2000. |
| 3104 | * If vendor specific format is supported, it might be bigger than 9 */ |
| 3105 | #ifndef BIP_IMG_ENCODE_SIZE |
| 3106 | #define BIP_IMG_ENCODE_SIZE 9 |
| 3107 | #endif |
| 3108 | |
| 3109 | /* MIME type: text/plain */ |
| 3110 | #ifndef BIP_TYPE_SIZE |
| 3111 | #define BIP_TYPE_SIZE 20 |
| 3112 | #endif |
| 3113 | |
| 3114 | /* example: iso-8895-1 */ |
| 3115 | #ifndef BIP_CHARSET_SIZE |
| 3116 | #define BIP_CHARSET_SIZE 10 |
| 3117 | #endif |
| 3118 | |
| 3119 | /* friendly name */ |
| 3120 | #ifndef BIP_FNAME_SIZE |
| 3121 | #define BIP_FNAME_SIZE 20 |
| 3122 | #endif |
| 3123 | |
| 3124 | /* service name */ |
| 3125 | #ifndef BIP_SNAME_SIZE |
| 3126 | #define BIP_SNAME_SIZE 60 |
| 3127 | #endif |
| 3128 | |
| 3129 | /* temporary storage file name(for file system access, may include path) */ |
| 3130 | #ifndef BIP_TEMP_NAME_SIZE |
| 3131 | #define BIP_TEMP_NAME_SIZE 200 |
| 3132 | #endif |
| 3133 | |
| 3134 | /* image file name */ |
| 3135 | #ifndef BIP_IMG_NAME_SIZE |
| 3136 | #define BIP_IMG_NAME_SIZE 200 |
| 3137 | #endif |
| 3138 | |
| 3139 | /* attachment file name */ |
| 3140 | #ifndef BIP_ATT_NAME_SIZE |
| 3141 | #define BIP_ATT_NAME_SIZE 200 |
| 3142 | #endif |
| 3143 | |
| 3144 | /* object (image, attachment, thumbnail) file name (may be used for file system) */ |
| 3145 | #ifndef BIP_OBJ_NAME_SIZE |
| 3146 | #define BIP_OBJ_NAME_SIZE 200 |
| 3147 | #endif |
| 3148 | |
| 3149 | |
| 3150 | |
| 3151 | /****************************************************************************** |
| 3152 | ** |
| 3153 | ** HCRP |
| 3154 | ** |
| 3155 | ******************************************************************************/ |
| 3156 | |
| 3157 | #ifndef HCRP_INCLUDED |
| 3158 | #define HCRP_INCLUDED FALSE |
| 3159 | #endif |
| 3160 | |
| 3161 | /* This is set to enable server. */ |
| 3162 | #ifndef HCRP_SERVER_INCLUDED |
| 3163 | #define HCRP_SERVER_INCLUDED FALSE |
| 3164 | #endif |
| 3165 | |
| 3166 | /* This is set to enable client. */ |
| 3167 | #ifndef HCRP_CLIENT_INCLUDED |
| 3168 | #define HCRP_CLIENT_INCLUDED FALSE |
| 3169 | #endif |
| 3170 | |
| 3171 | /* TRUE enables the notification option of the profile. */ |
| 3172 | #ifndef HCRP_NOTIFICATION_INCLUDED |
| 3173 | #define HCRP_NOTIFICATION_INCLUDED TRUE |
| 3174 | #endif |
| 3175 | |
| 3176 | /* TRUE enables the vendor specific option of the profile. */ |
| 3177 | #ifndef HCRP_VENDOR_SPEC_INCLUDED |
| 3178 | #define HCRP_VENDOR_SPEC_INCLUDED TRUE |
| 3179 | #endif |
| 3180 | |
| 3181 | /* TRUE enables state machine traces. */ |
| 3182 | #ifndef HCRP_FSM_DEBUG |
| 3183 | #define HCRP_FSM_DEBUG FALSE |
| 3184 | #endif |
| 3185 | |
| 3186 | /* TRUE enables protocol message traces. */ |
| 3187 | #ifndef HCRP_PROTO_DEBUG |
| 3188 | #define HCRP_PROTO_DEBUG FALSE |
| 3189 | #endif |
| 3190 | |
| 3191 | /* Maximum length used to store the service name (Minimum 1). */ |
| 3192 | #ifndef HCRP_MAX_SERVICE_NAME_LEN |
| 3193 | #define HCRP_MAX_SERVICE_NAME_LEN 32 |
| 3194 | #endif |
| 3195 | |
| 3196 | /* Maximum length used to store the device name (Minimum 1). */ |
| 3197 | #ifndef HCRP_MAX_DEVICE_NAME_LEN |
| 3198 | #define HCRP_MAX_DEVICE_NAME_LEN 32 |
| 3199 | #endif |
| 3200 | |
| 3201 | /* Maximum length of device location (Minimum 1) */ |
| 3202 | #ifndef HCRP_MAX_DEVICE_LOC_LEN |
| 3203 | #define HCRP_MAX_DEVICE_LOC_LEN 32 |
| 3204 | #endif |
| 3205 | |
| 3206 | /* Maximum length used to store the friendly name (Minimum 1). */ |
| 3207 | #ifndef HCRP_MAX_FRIENDLY_NAME_LEN |
| 3208 | #define HCRP_MAX_FRIENDLY_NAME_LEN 32 |
| 3209 | #endif |
| 3210 | |
| 3211 | /* Maximum length used to store the 1284 id string (Minimum 2 byte length field). */ |
| 3212 | #ifndef HCRP_MAX_SDP_1284_ID_LEN |
| 3213 | #define HCRP_MAX_SDP_1284_ID_LEN 128 |
| 3214 | #endif |
| 3215 | |
| 3216 | /* Maximum length for parameters to be processed for vendor specific commands. */ |
| 3217 | #ifndef HCRP_MAX_VEND_SPEC_LEN |
| 3218 | #define HCRP_MAX_VEND_SPEC_LEN 4 |
| 3219 | #endif |
| 3220 | |
| 3221 | /* Number of seconds to wait for 2nd GAP to open. */ |
| 3222 | #ifndef HCRP_OPEN_CHAN_TOUT |
| 3223 | #define HCRP_OPEN_CHAN_TOUT 5 |
| 3224 | #endif |
| 3225 | |
| 3226 | /* Number of seconds to wait for 2nd GAP to close. */ |
| 3227 | #ifndef HCRP_CLOSE_CHAN_TOUT |
| 3228 | #define HCRP_CLOSE_CHAN_TOUT 3 |
| 3229 | #endif |
| 3230 | |
| 3231 | /* Number of seconds to wait for the application to respond to a protocol request. */ |
| 3232 | #ifndef HCRP_APPL_RSP_TOUT |
| 3233 | #define HCRP_APPL_RSP_TOUT 5 |
| 3234 | #endif |
| 3235 | |
| 3236 | /* Number of seconds to wait for the peer device to respond to a protocol request. */ |
| 3237 | #ifndef HCRP_CMD_RSP_TOUT |
| 3238 | #define HCRP_CMD_RSP_TOUT 7 |
| 3239 | #endif |
| 3240 | |
| 3241 | /* Number of seconds between subsequent credit requests to the server when the send watermark has been exceeded. */ |
| 3242 | #ifndef HCRP_CREDIT_REQ_UPDATES |
| 3243 | #define HCRP_CREDIT_REQ_UPDATES 1 |
| 3244 | #endif |
| 3245 | |
| 3246 | /* Maximum number of results to return in a HCRP_FindServices search. */ |
| 3247 | #ifndef HCRP_MAX_SEARCH_RESULTS |
| 3248 | #define HCRP_MAX_SEARCH_RESULTS 1 |
| 3249 | #endif |
| 3250 | |
| 3251 | /* Maximum number of bytes to be reserved for searching for the client's notification record. */ |
| 3252 | #ifndef HCRP_MAX_NOTIF_DISC_BUF |
| 3253 | #define HCRP_MAX_NOTIF_DISC_BUF 300 |
| 3254 | #endif |
| 3255 | |
| 3256 | /* Maximum number of clients the server will allow to be registered for notifications. */ |
| 3257 | #ifndef HCRP_MAX_NOTIF_CLIENTS |
| 3258 | #define HCRP_MAX_NOTIF_CLIENTS 3 |
| 3259 | #endif |
| 3260 | |
| 3261 | /* Spec says minimum of two notification retries. */ |
| 3262 | #ifndef HCRP_NOTIF_NUM_RETRIES |
| 3263 | #define HCRP_NOTIF_NUM_RETRIES 4 |
| 3264 | #endif |
| 3265 | |
| 3266 | /************************************************************************* |
| 3267 | ** Definitions for Multi-Client Server HCRP |
| 3268 | ** Note: Many of the above HCRP definitions are also used |
| 3269 | ** Maximum number of clients allowed to connect simultaneously |
| 3270 | ** Must be less than ((GAP_MAX_CONNECTIONS - 1) / 2) |
| 3271 | */ |
| 3272 | #ifndef HCRPM_MAX_CLIENTS |
| 3273 | #define HCRPM_MAX_CLIENTS 3 |
| 3274 | #endif |
| 3275 | |
| 3276 | |
| 3277 | /****************************************************************************** |
| 3278 | ** |
| 3279 | ** PAN |
| 3280 | ** |
| 3281 | ******************************************************************************/ |
| 3282 | |
| 3283 | #ifndef PAN_INCLUDED |
| 3284 | #define PAN_INCLUDED FALSE |
| 3285 | #endif |
| 3286 | |
| 3287 | |
| 3288 | /****************************************************************************** |
| 3289 | ** |
| 3290 | ** SAP |
| 3291 | ** |
| 3292 | ******************************************************************************/ |
| 3293 | |
| 3294 | #ifndef SAP_SERVER_INCLUDED |
| 3295 | #define SAP_SERVER_INCLUDED FALSE |
| 3296 | #endif |
| 3297 | |
| 3298 | |
| 3299 | /************************************************************************* |
| 3300 | * A2DP Definitions |
| 3301 | */ |
| 3302 | #ifndef A2D_INCLUDED |
| 3303 | #define A2D_INCLUDED FALSE |
| 3304 | #endif |
| 3305 | |
| 3306 | /* TRUE to include SBC utility functions */ |
| 3307 | #ifndef A2D_SBC_INCLUDED |
| 3308 | #define A2D_SBC_INCLUDED A2D_INCLUDED |
| 3309 | #endif |
| 3310 | |
| 3311 | /* TRUE to include MPEG-1,2 (mp3) utility functions */ |
| 3312 | #ifndef A2D_M12_INCLUDED |
| 3313 | #define A2D_M12_INCLUDED A2D_INCLUDED |
| 3314 | #endif |
| 3315 | |
| 3316 | /* TRUE to include MPEG-2,4 (aac) utility functions */ |
| 3317 | #ifndef A2D_M24_INCLUDED |
| 3318 | #define A2D_M24_INCLUDED A2D_INCLUDED |
| 3319 | #endif |
| 3320 | |
| 3321 | /************************************************************************* |
| 3322 | * VDP Definitions |
| 3323 | */ |
| 3324 | #ifndef VDP_INCLUDED |
| 3325 | #define VDP_INCLUDED FALSE |
| 3326 | #endif |
| 3327 | |
| 3328 | /****************************************************************************** |
| 3329 | ** |
| 3330 | ** AVCTP |
| 3331 | ** |
| 3332 | ******************************************************************************/ |
| 3333 | |
| 3334 | #ifndef AVCT_INCLUDED |
| 3335 | #define AVCT_INCLUDED FALSE |
| 3336 | #endif |
| 3337 | |
| 3338 | /* Number of simultaneous ACL links to different peer devices. */ |
| 3339 | #ifndef AVCT_NUM_LINKS |
| 3340 | #define AVCT_NUM_LINKS 2 |
| 3341 | #endif |
| 3342 | |
| 3343 | /* Number of simultaneous AVCTP connections. */ |
| 3344 | #ifndef AVCT_NUM_CONN |
| 3345 | #define AVCT_NUM_CONN 3 |
| 3346 | #endif |
| 3347 | |
| 3348 | /* TRUE to support the browsing channel. */ |
| 3349 | #ifndef AVCT_BROWSE_INCLUDED |
| 3350 | #define AVCT_BROWSE_INCLUDED TRUE |
| 3351 | #endif |
| 3352 | |
| 3353 | #if ((L2CAP_FCR_INCLUDED == FALSE) && (AVCT_BROWSE_INCLUDED == TRUE)) |
| 3354 | #undef AVCT_BROWSE_INCLUDED |
| 3355 | #define AVCT_BROWSE_INCLUDED FALSE |
| 3356 | #endif |
| 3357 | |
| 3358 | /* Pool ID where to reassemble the SDU. |
| 3359 | This Pool allows buffers to be used that are larger than |
| 3360 | the L2CAP_MAX_MTU. */ |
| 3361 | #ifndef AVCT_BR_USER_RX_POOL_ID |
| 3362 | #define AVCT_BR_USER_RX_POOL_ID HCI_ACL_POOL_ID |
| 3363 | #endif |
| 3364 | |
| 3365 | /* Pool ID where to hold the SDU. |
| 3366 | This Pool allows buffers to be used that are larger than |
| 3367 | the L2CAP_MAX_MTU. */ |
| 3368 | #ifndef AVCT_BR_USER_TX_POOL_ID |
| 3369 | #define AVCT_BR_USER_TX_POOL_ID HCI_ACL_POOL_ID |
| 3370 | #endif |
| 3371 | |
| 3372 | /* |
| 3373 | GKI Buffer Pool ID used to hold MPS segments during SDU reassembly |
| 3374 | */ |
| 3375 | #ifndef AVCT_BR_FCR_RX_POOL_ID |
| 3376 | #define AVCT_BR_FCR_RX_POOL_ID HCI_ACL_POOL_ID |
| 3377 | #endif |
| 3378 | |
| 3379 | /* |
| 3380 | GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions. |
| 3381 | L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. |
| 3382 | Note: This pool needs to have enough buffers to hold two times the window size negotiated |
| 3383 | in the tL2CAP_FCR_OPTIONS (2 * tx_win_size) to allow for retransmissions. |
| 3384 | The size of each buffer must be able to hold the maximum MPS segment size passed in |
| 3385 | tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). |
| 3386 | */ |
| 3387 | #ifndef AVCT_BR_FCR_TX_POOL_ID |
| 3388 | #define AVCT_BR_FCR_TX_POOL_ID HCI_ACL_POOL_ID |
| 3389 | #endif |
| 3390 | |
| 3391 | /* AVCTP Browsing channel FCR Option: |
| 3392 | Size of the transmission window when using enhanced retransmission mode. Not used |
| 3393 | in basic and streaming modes. Range: 1 - 63 |
| 3394 | */ |
| 3395 | #ifndef AVCT_BR_FCR_OPT_TX_WINDOW_SIZE |
| 3396 | #define AVCT_BR_FCR_OPT_TX_WINDOW_SIZE 10 |
| 3397 | #endif |
| 3398 | |
| 3399 | /* AVCTP Browsing channel FCR Option: |
| 3400 | Number of transmission attempts for a single I-Frame before taking |
| 3401 | Down the connection. Used In ERTM mode only. Value is Ignored in basic and |
| 3402 | Streaming modes. |
| 3403 | Range: 0, 1-0xFF |
| 3404 | 0 - infinite retransmissions |
| 3405 | 1 - single transmission |
| 3406 | */ |
| 3407 | #ifndef AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT |
| 3408 | #define AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT 20 |
| 3409 | #endif |
| 3410 | |
| 3411 | /* AVCTP Browsing channel FCR Option: Retransmission Timeout |
| 3412 | The AVRCP specification set a value in the range of 300 - 2000 ms |
| 3413 | Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode. |
| 3414 | Range: Minimum 2000 (2 secs) when supporting PBF. |
| 3415 | */ |
| 3416 | #ifndef AVCT_BR_FCR_OPT_RETX_TOUT |
| 3417 | #define AVCT_BR_FCR_OPT_RETX_TOUT 2000 |
| 3418 | #endif |
| 3419 | |
| 3420 | /* AVCTP Browsing channel FCR Option: Monitor Timeout |
| 3421 | The AVRCP specification set a value in the range of 300 - 2000 ms |
| 3422 | Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode. |
| 3423 | Range: Minimum 12000 (12 secs) when supporting PBF. |
| 3424 | */ |
| 3425 | #ifndef AVCT_BR_FCR_OPT_MONITOR_TOUT |
| 3426 | #define AVCT_BR_FCR_OPT_MONITOR_TOUT 12000 |
| 3427 | #endif |
| 3428 | |
| 3429 | /****************************************************************************** |
| 3430 | ** |
| 3431 | ** AVRCP |
| 3432 | ** |
| 3433 | ******************************************************************************/ |
| 3434 | |
| 3435 | #ifndef AVRC_INCLUDED |
| 3436 | #define AVRC_INCLUDED FALSE |
| 3437 | #endif |
| 3438 | |
| 3439 | /* TRUE to support AVRCP 1.3 - Metadata. */ |
| 3440 | #ifndef AVRC_METADATA_INCLUDED |
| 3441 | #define AVRC_METADATA_INCLUDED TRUE |
| 3442 | #endif |
| 3443 | |
| 3444 | /* TRUE to support AVRCP 1.4 - Advanced Control. */ |
| 3445 | #ifndef AVRC_ADV_CTRL_INCLUDED |
| 3446 | #define AVRC_ADV_CTRL_INCLUDED TRUE |
| 3447 | #endif |
| 3448 | |
| 3449 | /****************************************************************************** |
| 3450 | ** |
| 3451 | ** MCAP |
| 3452 | ** |
| 3453 | ******************************************************************************/ |
| 3454 | #ifndef MCA_INCLUDED |
| 3455 | #define MCA_INCLUDED FALSE |
| 3456 | #endif |
| 3457 | |
| 3458 | /* TRUE to support Clock Synchronization OpCodes */ |
| 3459 | #ifndef MCA_SYNC_INCLUDED |
| 3460 | #define MCA_SYNC_INCLUDED FALSE |
| 3461 | #endif |
| 3462 | |
| 3463 | /* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */ |
| 3464 | #ifndef MCA_CTRL_MTU |
| 3465 | #define MCA_CTRL_MTU 60 |
| 3466 | #endif |
| 3467 | |
| 3468 | /* The maximum number of registered MCAP instances. */ |
| 3469 | #ifndef MCA_NUM_REGS |
| 3470 | #define MCA_NUM_REGS 3 |
| 3471 | #endif |
| 3472 | |
| 3473 | /* The maximum number of control channels (to difference devices) per registered MCAP instances. */ |
| 3474 | #ifndef MCA_NUM_LINKS |
| 3475 | #define MCA_NUM_LINKS 3 |
| 3476 | #endif |
| 3477 | |
| 3478 | /* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */ |
| 3479 | #ifndef MCA_NUM_DEPS |
| 3480 | #define MCA_NUM_DEPS 3 |
| 3481 | #endif |
| 3482 | |
| 3483 | /* The maximum number of MDL link per control channel. */ |
| 3484 | #ifndef MCA_NUM_MDLS |
| 3485 | #define MCA_NUM_MDLS 4 |
| 3486 | #endif |
| 3487 | |
| 3488 | /* Pool ID where to reassemble the SDU. */ |
| 3489 | #ifndef MCA_USER_RX_POOL_ID |
| 3490 | #define MCA_USER_RX_POOL_ID HCI_ACL_POOL_ID |
| 3491 | #endif |
| 3492 | |
| 3493 | /* Pool ID where to hold the SDU. */ |
| 3494 | #ifndef MCA_USER_TX_POOL_ID |
| 3495 | #define MCA_USER_TX_POOL_ID HCI_ACL_POOL_ID |
| 3496 | #endif |
| 3497 | |
| 3498 | /* |
| 3499 | GKI Buffer Pool ID used to hold MPS segments during SDU reassembly |
| 3500 | */ |
| 3501 | #ifndef MCA_FCR_RX_POOL_ID |
| 3502 | #define MCA_FCR_RX_POOL_ID HCI_ACL_POOL_ID |
| 3503 | #endif |
| 3504 | |
| 3505 | /* |
| 3506 | GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions. |
| 3507 | L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. |
| 3508 | Note: This pool needs to have enough buffers to hold two times the window size negotiated |
| 3509 | in the tL2CAP_FCR_OPTIONS (2 * tx_win_size) to allow for retransmissions. |
| 3510 | The size of each buffer must be able to hold the maximum MPS segment size passed in |
| 3511 | tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). |
| 3512 | */ |
| 3513 | #ifndef MCA_FCR_TX_POOL_ID |
| 3514 | #define MCA_FCR_TX_POOL_ID HCI_ACL_POOL_ID |
| 3515 | #endif |
| 3516 | |
| 3517 | /* MCAP control channel FCR Option: |
| 3518 | Size of the transmission window when using enhanced retransmission mode. |
| 3519 | 1 is defined by HDP specification for control channel. |
| 3520 | */ |
| 3521 | #ifndef MCA_FCR_OPT_TX_WINDOW_SIZE |
| 3522 | #define MCA_FCR_OPT_TX_WINDOW_SIZE 1 |
| 3523 | #endif |
| 3524 | |
| 3525 | /* MCAP control channel FCR Option: |
| 3526 | Number of transmission attempts for a single I-Frame before taking |
| 3527 | Down the connection. Used In ERTM mode only. Value is Ignored in basic and |
| 3528 | Streaming modes. |
| 3529 | Range: 0, 1-0xFF |
| 3530 | 0 - infinite retransmissions |
| 3531 | 1 - single transmission |
| 3532 | */ |
| 3533 | #ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT |
| 3534 | #define MCA_FCR_OPT_MAX_TX_B4_DISCNT 20 |
| 3535 | #endif |
| 3536 | |
| 3537 | /* MCAP control channel FCR Option: Retransmission Timeout |
| 3538 | The AVRCP specification set a value in the range of 300 - 2000 ms |
| 3539 | Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode. |
| 3540 | Range: Minimum 2000 (2 secs) when supporting PBF. |
| 3541 | */ |
| 3542 | #ifndef MCA_FCR_OPT_RETX_TOUT |
| 3543 | #define MCA_FCR_OPT_RETX_TOUT 2000 |
| 3544 | #endif |
| 3545 | |
| 3546 | /* MCAP control channel FCR Option: Monitor Timeout |
| 3547 | The AVRCP specification set a value in the range of 300 - 2000 ms |
| 3548 | Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode. |
| 3549 | Range: Minimum 12000 (12 secs) when supporting PBF. |
| 3550 | */ |
| 3551 | #ifndef MCA_FCR_OPT_MONITOR_TOUT |
| 3552 | #define MCA_FCR_OPT_MONITOR_TOUT 12000 |
| 3553 | #endif |
| 3554 | |
| 3555 | /* MCAP control channel FCR Option: Maximum PDU payload size. |
| 3556 | The maximum number of payload octets that the local device can receive in a single PDU. |
| 3557 | */ |
| 3558 | #ifndef MCA_FCR_OPT_MPS_SIZE |
| 3559 | #define MCA_FCR_OPT_MPS_SIZE 1000 |
| 3560 | #endif |
| 3561 | |
| 3562 | /* Shared transport */ |
| 3563 | #ifndef NFC_SHARED_TRANSPORT_ENABLED |
| 3564 | #define NFC_SHARED_TRANSPORT_ENABLED FALSE |
| 3565 | #endif |
| 3566 | |
| 3567 | /****************************************************************************** |
| 3568 | ** |
| 3569 | ** SER |
| 3570 | ** |
| 3571 | ******************************************************************************/ |
| 3572 | |
| 3573 | #ifndef SER_INCLUDED |
| 3574 | #define SER_INCLUDED FALSE |
| 3575 | #endif |
| 3576 | |
| 3577 | /* Task which runs the serial application. */ |
| 3578 | #ifndef SER_TASK |
| 3579 | #define SER_TASK BTE_APPL_TASK |
| 3580 | #endif |
| 3581 | |
| 3582 | /* Mailbox used by serial application. */ |
| 3583 | #ifndef SER_MBOX |
| 3584 | #define SER_MBOX TASK_MBOX_1 |
| 3585 | #endif |
| 3586 | |
| 3587 | /* Mailbox mask. */ |
| 3588 | #ifndef SER_MBOX_MASK |
| 3589 | #define SER_MBOX_MASK TASK_MBOX_1_EVT_MASK |
| 3590 | #endif |
| 3591 | |
| 3592 | /* TX path application event. */ |
| 3593 | #ifndef SER_TX_PATH_APPL_EVT |
| 3594 | #define SER_TX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_3) |
| 3595 | #endif |
| 3596 | |
| 3597 | /* RX path application event. */ |
| 3598 | #ifndef SER_RX_PATH_APPL_EVT |
| 3599 | #define SER_RX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_4) |
| 3600 | #endif |
| 3601 | |
| 3602 | /****************************************************************************** |
| 3603 | ** |
| 3604 | ** HCI Services |
| 3605 | ** |
| 3606 | ******************************************************************************/ |
| 3607 | /* Event mask reserved for handling HCIS events HCISU_TASK */ |
| 3608 | #ifndef HCISU_EVT_MASK |
| 3609 | #define HCISU_EVT_MASK EVENT_MASK(APPL_EVT_0) |
| 3610 | #endif |
| 3611 | |
| 3612 | /* MBox reserved for handling HCIS events HCISU_TASK */ |
| 3613 | #ifndef HCISU_MBOX |
| 3614 | #define HCISU_MBOX TASK_MBOX_2 |
| 3615 | #endif |
| 3616 | |
| 3617 | /* MBox event mask reserved for handling HCIS events HCISU_TASK */ |
| 3618 | #ifndef HCISU_MBOX_EVT_MASK |
| 3619 | #define HCISU_MBOX_EVT_MASK TASK_MBOX_2_EVT_MASK |
| 3620 | #endif |
| 3621 | |
| 3622 | /* Timer reserved for handling HCIS events HCISU_TASK */ |
| 3623 | #ifndef HCISU_TIMER |
| 3624 | #define HCISU_TIMER TIMER_2 |
| 3625 | #endif |
| 3626 | |
| 3627 | /* Timer event mask reserved for handling HCIS events HCISU_TASK */ |
| 3628 | #ifndef HCISU_TIMER_EVT_MASK |
| 3629 | #define HCISU_TIMER_EVT_MASK TIMER_2_EVT_MASK |
| 3630 | #endif |
| 3631 | |
| 3632 | /****************************************************************************** |
| 3633 | ** |
| 3634 | ** HCI UART |
| 3635 | ** |
| 3636 | ******************************************************************************/ |
| 3637 | #ifndef BAUDRATE_UPDATE_ENCODED_INCLUDED |
| 3638 | #define BAUDRATE_UPDATE_ENCODED_INCLUDED FALSE |
| 3639 | #endif |
| 3640 | |
| 3641 | /****************************************************************************** |
| 3642 | ** |
| 3643 | ** HCI Services (H5 3 wired uart), H4 plus SLIP enabled |
| 3644 | ** |
| 3645 | ******************************************************************************/ |
| 3646 | #ifndef SLIP_INCLUDED |
| 3647 | #define SLIP_INCLUDED TRUE |
| 3648 | #endif |
| 3649 | |
| 3650 | #ifndef SLIP_STATIS_INCLUDED |
| 3651 | #define SLIP_STATIS_INCLUDED TRUE |
| 3652 | #endif |
| 3653 | |
| 3654 | #ifndef SLIP_SW_FLOW_CTRL |
| 3655 | #define SLIP_SW_FLOW_CTRL TRUE |
| 3656 | #endif |
| 3657 | |
| 3658 | #ifndef BT_TRACE_SLIP |
| 3659 | #define BT_TRACE_SLIP FALSE |
| 3660 | #endif |
| 3661 | |
| 3662 | #ifndef SLIP_HOST_SLIDING_WINDOW_SIZE |
| 3663 | #define SLIP_HOST_SLIDING_WINDOW_SIZE 7 |
| 3664 | #endif |
| 3665 | |
| 3666 | #ifndef SLIP_MAX_RETRANSMIT |
| 3667 | #define SLIP_MAX_RETRANSMIT 10 |
| 3668 | #endif |
| 3669 | |
| 3670 | /* time (in ms) interval between WAKEUP messages */ |
| 3671 | #ifndef SLIP_WAKEUP_INTERVAL |
| 3672 | #define SLIP_WAKEUP_INTERVAL 10 |
| 3673 | #endif |
| 3674 | |
| 3675 | /* max trial to send WAKEUP messages up to 255 */ |
| 3676 | #ifndef SLIP_MAX_WAKEUP_TRIAL |
| 3677 | #define SLIP_MAX_WAKEUP_TRIAL 10 |
| 3678 | #endif |
| 3679 | |
| 3680 | /* |
| 3681 | The H5 work around sequence will be: |
| 3682 | |
| 3683 | 1. controller sends CONFIG with configuration field. (This is not spec compliance. |
| 3684 | Controller shall not have configuration field. This initiates work around.) |
| 3685 | 2. host ignore the configuration field. |
| 3686 | 3. Host sends CONFIG with configuration field. |
| 3687 | 4. controller reponse CONFIG_RESPONSE with configuration field. This shall be the |
| 3688 | final configuration both FW and STACK use. (spec compliance). |
| 3689 | 5. Host copied the configuration field over and sent CONFIG_RESPONSE with this |
| 3690 | configuration field (workaround) |
| 3691 | */ |
| 3692 | |
| 3693 | #ifndef SLIP_CONFIG_FIELD_WORK_AROUND_INCLUDED |
| 3694 | #define SLIP_CONFIG_FIELD_WORK_AROUND_INCLUDED TRUE |
| 3695 | #endif |
| 3696 | |
| 3697 | /****************************************************************************** |
| 3698 | ** |
| 3699 | ** Sleep Mode (Low Power Mode) |
| 3700 | ** |
| 3701 | ******************************************************************************/ |
| 3702 | #ifndef HCILP_INCLUDED |
| 3703 | #define HCILP_INCLUDED TRUE |
| 3704 | #endif |
| 3705 | |
| 3706 | /* sleep mode |
| 3707 | |
| 3708 | 0: disable |
| 3709 | 1: UART with Host wake/BT wake out of band signals |
| 3710 | 4: H4IBSS, UART with in band signal without Host/BT wake |
| 3711 | 9: H5 with in band signal of SLIP without Host/BT wake |
| 3712 | */ |
| 3713 | #ifndef HCILP_SLEEP_MODE |
| 3714 | #define HCILP_SLEEP_MODE (0) |
| 3715 | #endif |
| 3716 | |
| 3717 | /* Host Stack Idle Threshold in 300ms or 25ms, it depends on controller |
| 3718 | |
| 3719 | In sleep mode 1, this is the number of firmware loops executed with no activity |
| 3720 | before the Host wake line is deasserted. Activity includes HCI traffic excluding |
| 3721 | certain sleep mode commands and the presence of SCO connections if the |
| 3722 | "Allow Host Sleep During SCO" flag is not set to 1. Each count of this |
| 3723 | parameter is roughly equivalent to 300ms or 25ms. |
| 3724 | |
| 3725 | Not applicable for sleep mode 4(H4IBSS) and 9(H5) |
| 3726 | */ |
| 3727 | #ifndef HCILP_IDLE_THRESHOLD |
| 3728 | #define HCILP_IDLE_THRESHOLD (1) |
| 3729 | #endif |
| 3730 | |
| 3731 | /* Host Controller Idle Threshold in 300ms or 25ms, it depends on controller |
| 3732 | |
| 3733 | This is the number of firmware loops executed with no activity before the HC is |
| 3734 | considered idle. Depending on the mode, HC may then attempt to sleep. |
| 3735 | Activity includes HCI traffic excluding certain sleep mode commands and |
| 3736 | the presence of ACL/SCO connections. |
| 3737 | |
| 3738 | Not applicable for sleep mode 4(H4IBSS) |
| 3739 | */ |
| 3740 | #ifndef HCILP_HC_IDLE_THRESHOLD |
| 3741 | #define HCILP_HC_IDLE_THRESHOLD (1) |
| 3742 | #endif |
| 3743 | |
| 3744 | /* GPIO for BT_WAKE signal */ |
| 3745 | /* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */ |
| 3746 | #ifndef HCILP_BT_WAKE_GPIO |
| 3747 | #define HCILP_BT_WAKE_GPIO UPIO_GENERAL1 |
| 3748 | #endif |
| 3749 | |
| 3750 | /* GPIO for HOST_WAKE signal */ |
| 3751 | /* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */ |
| 3752 | #ifndef HCILP_HOST_WAKE_GPIO |
| 3753 | #define HCILP_HOST_WAKE_GPIO UPIO_GENERAL2 |
| 3754 | #endif |
| 3755 | |
| 3756 | /* BT_WAKE Polarity - 0=Active Low, 1= Active High */ |
| 3757 | /* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */ |
| 3758 | #ifndef HCILP_BT_WAKE_POLARITY |
| 3759 | #define HCILP_BT_WAKE_POLARITY 0 |
| 3760 | #endif |
| 3761 | |
| 3762 | /* HOST_WAKE Polarity - 0=Active Low, 1= Active High */ |
| 3763 | /* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */ |
| 3764 | #ifndef HCILP_HOST_WAKE_POLARITY |
| 3765 | #define HCILP_HOST_WAKE_POLARITY 0 |
| 3766 | #endif |
| 3767 | |
| 3768 | /* HCILP_ALLOW_HOST_SLEEP_DURING_SCO |
| 3769 | |
| 3770 | When this flag is set to 0, the host is not allowed to sleep while |
| 3771 | an SCO is active. In sleep mode 1, the device will keep the host |
| 3772 | wake line asserted while an SCO is active. |
| 3773 | When this flag is set to 1, the host can sleep while an SCO is active. |
| 3774 | This flag should only be set to 1 if SCO traffic is directed to the PCM interface. |
| 3775 | |
| 3776 | Not applicable for sleep mode 4(H4IBSS) and 9(H5) |
| 3777 | */ |
| 3778 | #ifndef HCILP_ALLOW_HOST_SLEEP_DURING_SCO |
| 3779 | #define HCILP_ALLOW_HOST_SLEEP_DURING_SCO 1 |
| 3780 | #endif |
| 3781 | |
| 3782 | /* HCILP_COMBINE_SLEEP_MODE_AND_LPM |
| 3783 | |
| 3784 | In Mode 0, always set byte 7 to 0. In sleep mode 1, device always |
| 3785 | requires permission to sleep between scans / periodic inquiries regardless |
| 3786 | of the setting of this byte. In sleep mode 1, if byte is set, device must |
| 3787 | have "permission" to sleep during the low power modes of sniff, hold, and park. |
| 3788 | If byte is not set, device can sleep without permission during these modes. |
| 3789 | Permission to sleep in Mode 1 is obtained if the BT_WAKE signal is not asserted. |
| 3790 | |
| 3791 | Not applicable for sleep mode 4(H4IBSS) and 9(H5) |
| 3792 | */ |
| 3793 | #ifndef HCILP_COMBINE_SLEEP_MODE_AND_LPM |
| 3794 | #define HCILP_COMBINE_SLEEP_MODE_AND_LPM 1 |
| 3795 | #endif |
| 3796 | |
| 3797 | /* HCILP_ENABLE_UART_TXD_TRI_STATE |
| 3798 | |
| 3799 | When set to 0, the device will not tristate its UART TX line before going to sleep. |
| 3800 | When set to 1, the device will tristate its UART TX line before going to sleep. |
| 3801 | |
| 3802 | Not applicable for sleep mode 4(H4IBSS) and 9(H5) |
| 3803 | */ |
| 3804 | #ifndef HCILP_ENABLE_UART_TXD_TRI_STATE |
| 3805 | #define HCILP_ENABLE_UART_TXD_TRI_STATE 0 |
| 3806 | #endif |
| 3807 | |
| 3808 | /* HCILP_PULSED_HOST_WAKE |
| 3809 | |
| 3810 | Not applicable for sleep mode 4(H4IBSS) and 9(H5) |
| 3811 | */ |
| 3812 | #ifndef HCILP_PULSED_HOST_WAKE |
| 3813 | #define HCILP_PULSED_HOST_WAKE 0 |
| 3814 | #endif |
| 3815 | |
| 3816 | /* HCILP_SLEEP_GUARD_TIME |
| 3817 | |
| 3818 | Only for sleep mode 4(H4IBSS) |
| 3819 | Time in 12.5ms between starting to monitor controller's CTS and raising its RTS |
| 3820 | */ |
| 3821 | #ifndef HCILP_SLEEP_GUARD_TIME |
| 3822 | #define HCILP_SLEEP_GUARD_TIME 5 |
| 3823 | #endif |
| 3824 | |
| 3825 | /* HCILP_WAKEUP_GUARD_TIME |
| 3826 | |
| 3827 | Only for sleep mode 4(H4IBSS) |
| 3828 | Time in 12.5ms between starting to monitor controller's CTS and lowering its RTS |
| 3829 | */ |
| 3830 | #ifndef HCILP_WAKEUP_GUARD_TIME |
| 3831 | #define HCILP_WAKEUP_GUARD_TIME 5 |
| 3832 | #endif |
| 3833 | |
| 3834 | /* HCILP_TXD_CONFIG |
| 3835 | |
| 3836 | Only for sleep mode 4(H4IBSS) |
| 3837 | 0: controller's TXD stays low in sleep mode |
| 3838 | 1: controller's TXD stays high in sleep mode (default) |
| 3839 | */ |
| 3840 | #ifndef HCILP_TXD_CONFIG |
| 3841 | #define HCILP_TXD_CONFIG 1 |
| 3842 | #endif |
| 3843 | |
| 3844 | /* HCILP_BT_WAKE_IDLE_TIMEOUT |
| 3845 | |
| 3846 | host's idle time in ms before initiating sleep procedure |
| 3847 | */ |
| 3848 | #ifndef HCILP_BT_WAKE_IDLE_TIMEOUT |
| 3849 | #define HCILP_BT_WAKE_IDLE_TIMEOUT 50 |
| 3850 | #endif |
| 3851 | |
| 3852 | #ifndef H4IBSS_INCLUDED |
| 3853 | #define H4IBSS_INCLUDED TRUE |
| 3854 | #endif |
| 3855 | |
| 3856 | /* display H4IBSS state and event in text */ |
| 3857 | #ifndef H4IBSS_DEBUG |
| 3858 | #define H4IBSS_DEBUG TRUE |
| 3859 | #endif |
| 3860 | |
| 3861 | /* time interval before going into sleep after having sent or received SLEEP_REQ_ACK */ |
| 3862 | /* Valid range is 20 - 50 ms */ |
| 3863 | #ifndef H4IBSS_SLEEP_GUARD_TIME |
| 3864 | #define H4IBSS_SLEEP_GUARD_TIME (40) |
| 3865 | #endif |
| 3866 | |
| 3867 | /* timeout(msec) to wait for response of sleep request */ |
| 3868 | #ifndef H4IBSS_SLEEP_REQ_RESP_TIME |
| 3869 | #define H4IBSS_SLEEP_REQ_RESP_TIME (50) |
| 3870 | #endif |
| 3871 | |
| 3872 | /****************************************************************************** |
| 3873 | ** |
| 3874 | ** RPC |
| 3875 | ** |
| 3876 | ******************************************************************************/ |
| 3877 | |
| 3878 | #ifndef RPC_INCLUDED |
| 3879 | #define RPC_INCLUDED FALSE |
| 3880 | #endif |
| 3881 | |
| 3882 | /* RPCT task mailbox ID for messages coming from rpcgen code. */ |
| 3883 | #ifndef RPCT_MBOX |
| 3884 | #define RPCT_MBOX TASK_MBOX_0 |
| 3885 | #endif |
| 3886 | |
| 3887 | /* RPCT task event for mailbox. */ |
| 3888 | #ifndef RPCT_RPC_MBOX_EVT |
| 3889 | #define RPCT_RPC_MBOX_EVT TASK_MBOX_0_EVT_MASK |
| 3890 | #endif |
| 3891 | |
| 3892 | /* RPCT task event from driver indicating RX data is ready. */ |
| 3893 | #ifndef RPCT_RX_READY_EVT |
| 3894 | #define RPCT_RX_READY_EVT APPL_EVT_0 |
| 3895 | #endif |
| 3896 | |
| 3897 | /* RPCT task event from driver indicating data TX is done. */ |
| 3898 | #ifndef RPCT_TX_DONE_EVT |
| 3899 | #define RPCT_TX_DONE_EVT APPL_EVT_1 |
| 3900 | #endif |
| 3901 | |
| 3902 | /* RPCT task event indicating data is in the circular buffer. */ |
| 3903 | #ifndef RPCT_UCBUF_EVT |
| 3904 | #define RPCT_UCBUF_EVT APPL_EVT_2 |
| 3905 | #endif |
| 3906 | |
| 3907 | /* Task ID of RPCGEN task. */ |
| 3908 | #ifndef RPCGEN_TASK |
| 3909 | #define RPCGEN_TASK BTU_TASK |
| 3910 | #endif |
| 3911 | |
| 3912 | /* RPCGEN task event for messages coming from RPCT. */ |
| 3913 | #ifndef RPCGEN_MSG_EVT |
| 3914 | #define RPCGEN_MSG_EVT TASK_MBOX_1_EVT_MASK |
| 3915 | #endif |
| 3916 | |
| 3917 | #ifndef RPCGEN_MSG_MBOX |
| 3918 | #define RPCGEN_MSG_MBOX TASK_MBOX_1 |
| 3919 | #endif |
| 3920 | |
| 3921 | /* Size of circular buffer used to store diagnostic messages. */ |
| 3922 | #ifndef RPCT_UCBUF_SIZE |
| 3923 | #define RPCT_UCBUF_SIZE 2000 |
| 3924 | #endif |
| 3925 | |
| 3926 | /****************************************************************************** |
| 3927 | ** |
| 3928 | ** SAP - Sample ICP and HSP applications |
| 3929 | ** |
| 3930 | ******************************************************************************/ |
| 3931 | |
| 3932 | #ifndef SAP_INCLUDED |
| 3933 | #define SAP_INCLUDED FALSE |
| 3934 | #endif |
| 3935 | |
| 3936 | #ifndef ICA_INCLUDED |
| 3937 | #define ICA_INCLUDED FALSE |
| 3938 | #endif |
| 3939 | |
| 3940 | #ifndef HSA_HS_INCLUDED |
| 3941 | #define HSA_HS_INCLUDED FALSE |
| 3942 | #endif |
| 3943 | |
| 3944 | #ifndef HSA_AG_INCLUDED |
| 3945 | #define HSA_AG_INCLUDED FALSE |
| 3946 | #endif |
| 3947 | |
| 3948 | #ifndef MMI_INCLUDED |
| 3949 | #define MMI_INCLUDED FALSE |
| 3950 | #endif |
| 3951 | |
| 3952 | /* MMI task event from driver indicating RX data is ready. */ |
| 3953 | #ifndef MMI_RX_READY_EVT |
| 3954 | #define MMI_RX_READY_EVT APPL_EVT_0 |
| 3955 | #endif |
| 3956 | |
| 3957 | /****************************************************************************** |
| 3958 | ** |
| 3959 | ** APPL - Application Task |
| 3960 | ** |
| 3961 | ******************************************************************************/ |
| 3962 | /* When TRUE indicates that an application task is to be run */ |
| 3963 | #ifndef APPL_INCLUDED |
| 3964 | #define APPL_INCLUDED FALSE |
| 3965 | #endif |
| 3966 | |
| 3967 | /* When TRUE remote terminal code included (RPC MUST be included) */ |
| 3968 | #ifndef RSI_INCLUDED |
| 3969 | #define RSI_INCLUDED FALSE |
| 3970 | #endif |
| 3971 | |
| 3972 | |
| 3973 | |
| 3974 | #define L2CAP_FEATURE_REQ_ID 73 |
| 3975 | #define L2CAP_FEATURE_RSP_ID 173 |
| 3976 | |
| 3977 | |
| 3978 | #define L2CAP_ENHANCED_FEATURES 0 |
| 3979 | |
| 3980 | |
| 3981 | |
| 3982 | /* Use gki_delay for patch ram */ |
| 3983 | #ifndef BCM2045_USE_DELAY |
| 3984 | #if ( SLIP_INCLUDED == TRUE ) |
| 3985 | /* H5 need to be initialized after sending download mini driver HCI command */ |
| 3986 | #define BCM2045_USE_DELAY FALSE |
| 3987 | #else |
| 3988 | #define BCM2045_USE_DELAY TRUE |
| 3989 | #endif |
| 3990 | #endif |
| 3991 | |
| 3992 | /****************************************************************************** |
| 3993 | ** |
| 3994 | ** BTA |
| 3995 | ** |
| 3996 | ******************************************************************************/ |
| 3997 | /* BTA EIR canned UUID list (default is dynamic) */ |
| 3998 | #ifndef BTA_EIR_CANNED_UUID_LIST |
| 3999 | #define BTA_EIR_CANNED_UUID_LIST FALSE |
| 4000 | #endif |
| 4001 | |
| 4002 | /* Number of supported customer UUID in EIR */ |
| 4003 | #ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID |
| 4004 | #define BTA_EIR_SERVER_NUM_CUSTOM_UUID 8 |
| 4005 | #endif |
| 4006 | |
| 4007 | /****************************************************************************** |
| 4008 | ** |
| 4009 | ** BTE |
| 4010 | ** |
| 4011 | ******************************************************************************/ |
| 4012 | #ifndef BTE_PLATFORM_IDLE |
| 4013 | #define BTE_PLATFORM_IDLE |
| 4014 | #endif |
| 4015 | |
| 4016 | #ifndef BTE_IDLE_TASK_INCLUDED |
| 4017 | #define BTE_IDLE_TASK_INCLUDED TRUE |
| 4018 | #endif |
| 4019 | |
| 4020 | #ifndef BTE_PLATFORM_INITHW |
| 4021 | #define BTE_PLATFORM_INITHW |
| 4022 | #endif |
| 4023 | |
| 4024 | #ifndef BTE_BTA_CODE_INCLUDED |
| 4025 | #define BTE_BTA_CODE_INCLUDED FALSE |
| 4026 | #endif |
| 4027 | |
| 4028 | |
| 4029 | /****************************************************************************** |
| 4030 | ** |
| 4031 | ** BTTRC |
| 4032 | ** |
| 4033 | ******************************************************************************/ |
| 4034 | /* Whether to parse and display traces-> Platform specific implementation */ |
| 4035 | #ifndef BTTRC_DISP |
| 4036 | #define BTTRC_DISP BTTRC_DispOnInsight |
| 4037 | #endif |
| 4038 | |
| 4039 | /****************************************************************************** |
| 4040 | ** |
| 4041 | ** Tracing: Include trace header file here. |
| 4042 | ** |
| 4043 | ******************************************************************************/ |
| 4044 | |
| 4045 | #include "bt_trace.h" |
| 4046 | |
| 4047 | #endif /* BT_TARGET_H */ |
| 4048 | |