blob: 1074231f0a0d722a803bcc968372d9705b582a53 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */
2/*
3 Written/copyright 1999-2001 by Donald Becker.
4 Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
5 Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com)
Mark Brownb27a16b2006-02-02 00:00:01 +00006 Portions copyright 2004 Harald Welte <laforge@gnumonks.org>
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
8 This software may be used and distributed according to the terms of
9 the GNU General Public License (GPL), incorporated herein by reference.
10 Drivers based on or derived from this code fall under the GPL and must
11 retain the authorship, copyright and license notice. This file is not
12 a complete program and may only be used when the entire operating
13 system is licensed under the GPL. License for under other terms may be
14 available. Contact the original author for details.
15
16 The original author may be reached as becker@scyld.com, or at
17 Scyld Computing Corporation
18 410 Severn Ave., Suite 210
19 Annapolis MD 21403
20
21 Support information and updates available at
22 http://www.scyld.com/network/netsemi.html
Jeff Garzik03a8c662006-06-27 07:57:22 -040023 [link no longer provides useful info -jgarzik]
Linus Torvalds1da177e2005-04-16 15:20:36 -070024
25
Linus Torvalds1da177e2005-04-16 15:20:36 -070026 TODO:
27 * big endian support with CFG:BEM instead of cpu_to_le32
Linus Torvalds1da177e2005-04-16 15:20:36 -070028*/
29
Linus Torvalds1da177e2005-04-16 15:20:36 -070030#include <linux/module.h>
31#include <linux/kernel.h>
32#include <linux/string.h>
33#include <linux/timer.h>
34#include <linux/errno.h>
35#include <linux/ioport.h>
36#include <linux/slab.h>
37#include <linux/interrupt.h>
38#include <linux/pci.h>
39#include <linux/netdevice.h>
40#include <linux/etherdevice.h>
41#include <linux/skbuff.h>
42#include <linux/init.h>
43#include <linux/spinlock.h>
44#include <linux/ethtool.h>
45#include <linux/delay.h>
46#include <linux/rtnetlink.h>
47#include <linux/mii.h>
48#include <linux/crc32.h>
49#include <linux/bitops.h>
Mark Brownb27a16b2006-02-02 00:00:01 +000050#include <linux/prefetch.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070051#include <asm/processor.h> /* Processor type for cache alignment. */
52#include <asm/io.h>
53#include <asm/irq.h>
54#include <asm/uaccess.h>
55
56#define DRV_NAME "natsemi"
Andy Gospodarekd5b20692006-09-11 17:39:18 -040057#define DRV_VERSION "2.1"
58#define DRV_RELDATE "Sept 11, 2006"
Linus Torvalds1da177e2005-04-16 15:20:36 -070059
60#define RX_OFFSET 2
61
62/* Updated to recommendations in pci-skeleton v2.03. */
63
64/* The user-configurable values.
65 These may be modified when a driver module is loaded.*/
66
67#define NATSEMI_DEF_MSG (NETIF_MSG_DRV | \
68 NETIF_MSG_LINK | \
69 NETIF_MSG_WOL | \
70 NETIF_MSG_RX_ERR | \
71 NETIF_MSG_TX_ERR)
72static int debug = -1;
73
Linus Torvalds1da177e2005-04-16 15:20:36 -070074static int mtu;
75
76/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
77 This chip uses a 512 element hash table based on the Ethernet CRC. */
Arjan van de Venf71e1302006-03-03 21:33:57 -050078static const int multicast_filter_limit = 100;
Linus Torvalds1da177e2005-04-16 15:20:36 -070079
80/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
81 Setting to > 1518 effectively disables this feature. */
82static int rx_copybreak;
83
Mark Brown1a147802007-05-03 10:36:56 +010084static int dspcfg_workaround = 1;
85
Linus Torvalds1da177e2005-04-16 15:20:36 -070086/* Used to pass the media type, etc.
87 Both 'options[]' and 'full_duplex[]' should exist for driver
88 interoperability.
89 The media type is usually passed in 'options[]'.
90*/
91#define MAX_UNITS 8 /* More are supported, limit only on options */
92static int options[MAX_UNITS];
93static int full_duplex[MAX_UNITS];
94
95/* Operational parameters that are set at compile time. */
96
97/* Keep the ring sizes a power of two for compile efficiency.
98 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
99 Making the Tx ring too large decreases the effectiveness of channel
100 bonding and packet priority.
101 There are no ill effects from too-large receive rings. */
102#define TX_RING_SIZE 16
103#define TX_QUEUE_LEN 10 /* Limit ring entries actually used, min 4. */
104#define RX_RING_SIZE 32
105
106/* Operational parameters that usually are not changed. */
107/* Time in jiffies before concluding the transmitter is hung. */
108#define TX_TIMEOUT (2*HZ)
109
110#define NATSEMI_HW_TIMEOUT 400
Mark Brownf2cade12007-10-09 22:57:39 +0100111#define NATSEMI_TIMER_FREQ 5*HZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112#define NATSEMI_PG0_NREGS 64
113#define NATSEMI_RFDR_NREGS 8
114#define NATSEMI_PG1_NREGS 4
115#define NATSEMI_NREGS (NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \
116 NATSEMI_PG1_NREGS)
117#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */
118#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119
120/* Buffer sizes:
121 * The nic writes 32-bit values, even if the upper bytes of
122 * a 32-bit value are beyond the end of the buffer.
123 */
124#define NATSEMI_HEADERS 22 /* 2*mac,type,vlan,crc */
125#define NATSEMI_PADDING 16 /* 2 bytes should be sufficient */
126#define NATSEMI_LONGPKT 1518 /* limit for normal packets */
127#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */
128
129/* These identify the driver base version and may not be removed. */
Stephen Hemminger23410492009-02-26 10:19:29 +0000130static const char version[] __devinitconst =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131 KERN_INFO DRV_NAME " dp8381x driver, version "
132 DRV_VERSION ", " DRV_RELDATE "\n"
Joe Perchesad361c92009-07-06 13:05:40 -0700133 " originally by Donald Becker <becker@scyld.com>\n"
134 " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
137MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
138MODULE_LICENSE("GPL");
139
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140module_param(mtu, int, 0);
141module_param(debug, int, 0);
142module_param(rx_copybreak, int, 0);
Mark Brown1a147802007-05-03 10:36:56 +0100143module_param(dspcfg_workaround, int, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144module_param_array(options, int, NULL, 0);
145module_param_array(full_duplex, int, NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
147MODULE_PARM_DESC(debug, "DP8381x default debug level");
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400148MODULE_PARM_DESC(rx_copybreak,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149 "DP8381x copy breakpoint for copy-only-tiny-frames");
Mark Brown1a147802007-05-03 10:36:56 +0100150MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround");
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400151MODULE_PARM_DESC(options,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152 "DP8381x: Bits 0-3: media type, bit 17: full duplex");
153MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
154
155/*
156 Theory of Operation
157
158I. Board Compatibility
159
160This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC.
161It also works with other chips in in the DP83810 series.
162
163II. Board-specific settings
164
165This driver requires the PCI interrupt line to be valid.
166It honors the EEPROM-set values.
167
168III. Driver operation
169
170IIIa. Ring buffers
171
172This driver uses two statically allocated fixed-size descriptor lists
173formed into rings by a branch from the final descriptor to the beginning of
174the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
175The NatSemi design uses a 'next descriptor' pointer that the driver forms
176into a list.
177
178IIIb/c. Transmit/Receive Structure
179
180This driver uses a zero-copy receive and transmit scheme.
181The driver allocates full frame size skbuffs for the Rx ring buffers at
182open() time and passes the skb->data field to the chip as receive data
183buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
184a fresh skbuff is allocated and the frame is copied to the new skbuff.
185When the incoming frame is larger, the skbuff is passed directly up the
186protocol stack. Buffers consumed this way are replaced by newly allocated
187skbuffs in a later phase of receives.
188
189The RX_COPYBREAK value is chosen to trade-off the memory wasted by
190using a full-sized skbuff for small frames vs. the copying costs of larger
191frames. New boards are typically used in generously configured machines
192and the underfilled buffers have negligible impact compared to the benefit of
193a single allocation size, so the default value of zero results in never
194copying packets. When copying is done, the cost is usually mitigated by using
195a combined copy/checksum routine. Copying also preloads the cache, which is
196most useful with small frames.
197
198A subtle aspect of the operation is that unaligned buffers are not permitted
199by the hardware. Thus the IP header at offset 14 in an ethernet frame isn't
200longword aligned for further processing. On copies frames are put into the
201skbuff at an offset of "+2", 16-byte aligning the IP header.
202
203IIId. Synchronization
204
205Most operations are synchronized on the np->lock irq spinlock, except the
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300206receive and transmit paths which are synchronised using a combination of
Mark Brown6344f052008-01-27 13:58:11 +0000207hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208
209IVb. References
210
211http://www.scyld.com/expert/100mbps.html
212http://www.scyld.com/expert/NWay.html
213Datasheet is available from:
214http://www.national.com/pf/DP/DP83815.html
215
216IVc. Errata
217
218None characterised.
219*/
220
221
222
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223/*
224 * Support for fibre connections on Am79C874:
225 * This phy needs a special setup when connected to a fibre cable.
226 * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf
227 */
228#define PHYID_AM79C874 0x0022561b
229
Jeff Garzika2b524b2006-06-26 22:48:38 -0400230enum {
231 MII_MCTRL = 0x15, /* mode control register */
232 MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */
233 MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */
234};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235
Mark Brown6aab4442007-02-19 20:15:40 +0000236enum {
237 NATSEMI_FLAG_IGNORE_PHY = 0x1,
238};
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400239
Linus Torvalds1da177e2005-04-16 15:20:36 -0700240/* array of board data directly indexed by pci_tbl[x].driver_data */
Andrew Mortonaa738ad2008-02-09 23:41:08 -0800241static struct {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 const char *name;
243 unsigned long flags;
Jeff Garzika2b524b2006-06-26 22:48:38 -0400244 unsigned int eeprom_size;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245} natsemi_pci_info[] __devinitdata = {
Mark Brown6aab4442007-02-19 20:15:40 +0000246 { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 },
Jeff Garzika2b524b2006-06-26 22:48:38 -0400247 { "NatSemi DP8381[56]", 0, 24 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700248};
249
Alexey Dobriyana3aa1882010-01-07 11:58:11 +0000250static DEFINE_PCI_DEVICE_TABLE(natsemi_pci_tbl) = {
Mark Brown6aab4442007-02-19 20:15:40 +0000251 { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 },
Mark Brown36c843d2007-02-25 15:37:27 +0000252 { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
Jeff Garzika2b524b2006-06-26 22:48:38 -0400253 { } /* terminate list */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254};
255MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl);
256
257/* Offsets to the device registers.
258 Unlike software-only systems, device drivers interact with complex hardware.
259 It's not useful to define symbolic names for every register bit in the
260 device.
261*/
262enum register_offsets {
263 ChipCmd = 0x00,
264 ChipConfig = 0x04,
265 EECtrl = 0x08,
266 PCIBusCfg = 0x0C,
267 IntrStatus = 0x10,
268 IntrMask = 0x14,
269 IntrEnable = 0x18,
270 IntrHoldoff = 0x1C, /* DP83816 only */
271 TxRingPtr = 0x20,
272 TxConfig = 0x24,
273 RxRingPtr = 0x30,
274 RxConfig = 0x34,
275 ClkRun = 0x3C,
276 WOLCmd = 0x40,
277 PauseCmd = 0x44,
278 RxFilterAddr = 0x48,
279 RxFilterData = 0x4C,
280 BootRomAddr = 0x50,
281 BootRomData = 0x54,
282 SiliconRev = 0x58,
283 StatsCtrl = 0x5C,
284 StatsData = 0x60,
285 RxPktErrs = 0x60,
286 RxMissed = 0x68,
287 RxCRCErrs = 0x64,
288 BasicControl = 0x80,
289 BasicStatus = 0x84,
290 AnegAdv = 0x90,
291 AnegPeer = 0x94,
292 PhyStatus = 0xC0,
293 MIntrCtrl = 0xC4,
294 MIntrStatus = 0xC8,
295 PhyCtrl = 0xE4,
296
297 /* These are from the spec, around page 78... on a separate table.
298 * The meaning of these registers depend on the value of PGSEL. */
299 PGSEL = 0xCC,
300 PMDCSR = 0xE4,
301 TSTDAT = 0xFC,
302 DSPCFG = 0xF4,
303 SDCFG = 0xF8
304};
305/* the values for the 'magic' registers above (PGSEL=1) */
306#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */
307#define TSTDAT_VAL 0x0
308#define DSPCFG_VAL 0x5040
309#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */
310#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */
311#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */
312#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */
313
314/* misc PCI space registers */
315enum pci_register_offsets {
316 PCIPM = 0x44,
317};
318
319enum ChipCmd_bits {
320 ChipReset = 0x100,
321 RxReset = 0x20,
322 TxReset = 0x10,
323 RxOff = 0x08,
324 RxOn = 0x04,
325 TxOff = 0x02,
326 TxOn = 0x01,
327};
328
329enum ChipConfig_bits {
330 CfgPhyDis = 0x200,
331 CfgPhyRst = 0x400,
332 CfgExtPhy = 0x1000,
333 CfgAnegEnable = 0x2000,
334 CfgAneg100 = 0x4000,
335 CfgAnegFull = 0x8000,
336 CfgAnegDone = 0x8000000,
337 CfgFullDuplex = 0x20000000,
338 CfgSpeed100 = 0x40000000,
339 CfgLink = 0x80000000,
340};
341
342enum EECtrl_bits {
343 EE_ShiftClk = 0x04,
344 EE_DataIn = 0x01,
345 EE_ChipSelect = 0x08,
346 EE_DataOut = 0x02,
347 MII_Data = 0x10,
348 MII_Write = 0x20,
349 MII_ShiftClk = 0x40,
350};
351
352enum PCIBusCfg_bits {
353 EepromReload = 0x4,
354};
355
356/* Bits in the interrupt status/mask registers. */
357enum IntrStatus_bits {
358 IntrRxDone = 0x0001,
359 IntrRxIntr = 0x0002,
360 IntrRxErr = 0x0004,
361 IntrRxEarly = 0x0008,
362 IntrRxIdle = 0x0010,
363 IntrRxOverrun = 0x0020,
364 IntrTxDone = 0x0040,
365 IntrTxIntr = 0x0080,
366 IntrTxErr = 0x0100,
367 IntrTxIdle = 0x0200,
368 IntrTxUnderrun = 0x0400,
369 StatsMax = 0x0800,
370 SWInt = 0x1000,
371 WOLPkt = 0x2000,
372 LinkChange = 0x4000,
373 IntrHighBits = 0x8000,
374 RxStatusFIFOOver = 0x10000,
375 IntrPCIErr = 0xf00000,
376 RxResetDone = 0x1000000,
377 TxResetDone = 0x2000000,
378 IntrAbnormalSummary = 0xCD20,
379};
380
381/*
382 * Default Interrupts:
383 * Rx OK, Rx Packet Error, Rx Overrun,
384 * Tx OK, Tx Packet Error, Tx Underrun,
385 * MIB Service, Phy Interrupt, High Bits,
386 * Rx Status FIFO overrun,
387 * Received Target Abort, Received Master Abort,
388 * Signalled System Error, Received Parity Error
389 */
390#define DEFAULT_INTR 0x00f1cd65
391
392enum TxConfig_bits {
393 TxDrthMask = 0x3f,
394 TxFlthMask = 0x3f00,
395 TxMxdmaMask = 0x700000,
396 TxMxdma_512 = 0x0,
397 TxMxdma_4 = 0x100000,
398 TxMxdma_8 = 0x200000,
399 TxMxdma_16 = 0x300000,
400 TxMxdma_32 = 0x400000,
401 TxMxdma_64 = 0x500000,
402 TxMxdma_128 = 0x600000,
403 TxMxdma_256 = 0x700000,
404 TxCollRetry = 0x800000,
405 TxAutoPad = 0x10000000,
406 TxMacLoop = 0x20000000,
407 TxHeartIgn = 0x40000000,
408 TxCarrierIgn = 0x80000000
409};
410
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400411/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 * Tx Configuration:
413 * - 256 byte DMA burst length
414 * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free)
415 * - 64 bytes initial drain threshold (i.e. begin actual transmission
416 * when 64 byte are in the fifo)
417 * - on tx underruns, increase drain threshold by 64.
418 * - at most use a drain threshold of 1472 bytes: The sum of the fill
419 * threshold and the drain threshold must be less than 2016 bytes.
420 *
421 */
422#define TX_FLTH_VAL ((512/32) << 8)
423#define TX_DRTH_VAL_START (64/32)
424#define TX_DRTH_VAL_INC 2
425#define TX_DRTH_VAL_LIMIT (1472/32)
426
427enum RxConfig_bits {
428 RxDrthMask = 0x3e,
429 RxMxdmaMask = 0x700000,
430 RxMxdma_512 = 0x0,
431 RxMxdma_4 = 0x100000,
432 RxMxdma_8 = 0x200000,
433 RxMxdma_16 = 0x300000,
434 RxMxdma_32 = 0x400000,
435 RxMxdma_64 = 0x500000,
436 RxMxdma_128 = 0x600000,
437 RxMxdma_256 = 0x700000,
438 RxAcceptLong = 0x8000000,
439 RxAcceptTx = 0x10000000,
440 RxAcceptRunt = 0x40000000,
441 RxAcceptErr = 0x80000000
442};
443#define RX_DRTH_VAL (128/8)
444
445enum ClkRun_bits {
446 PMEEnable = 0x100,
447 PMEStatus = 0x8000,
448};
449
450enum WolCmd_bits {
451 WakePhy = 0x1,
452 WakeUnicast = 0x2,
453 WakeMulticast = 0x4,
454 WakeBroadcast = 0x8,
455 WakeArp = 0x10,
456 WakePMatch0 = 0x20,
457 WakePMatch1 = 0x40,
458 WakePMatch2 = 0x80,
459 WakePMatch3 = 0x100,
460 WakeMagic = 0x200,
461 WakeMagicSecure = 0x400,
462 SecureHack = 0x100000,
463 WokePhy = 0x400000,
464 WokeUnicast = 0x800000,
465 WokeMulticast = 0x1000000,
466 WokeBroadcast = 0x2000000,
467 WokeArp = 0x4000000,
468 WokePMatch0 = 0x8000000,
469 WokePMatch1 = 0x10000000,
470 WokePMatch2 = 0x20000000,
471 WokePMatch3 = 0x40000000,
472 WokeMagic = 0x80000000,
473 WakeOptsSummary = 0x7ff
474};
475
476enum RxFilterAddr_bits {
477 RFCRAddressMask = 0x3ff,
478 AcceptMulticast = 0x00200000,
479 AcceptMyPhys = 0x08000000,
480 AcceptAllPhys = 0x10000000,
481 AcceptAllMulticast = 0x20000000,
482 AcceptBroadcast = 0x40000000,
483 RxFilterEnable = 0x80000000
484};
485
486enum StatsCtrl_bits {
487 StatsWarn = 0x1,
488 StatsFreeze = 0x2,
489 StatsClear = 0x4,
490 StatsStrobe = 0x8,
491};
492
493enum MIntrCtrl_bits {
494 MICRIntEn = 0x2,
495};
496
497enum PhyCtrl_bits {
498 PhyAddrMask = 0x1f,
499};
500
501#define PHY_ADDR_NONE 32
502#define PHY_ADDR_INTERNAL 1
503
504/* values we might find in the silicon revision register */
505#define SRR_DP83815_C 0x0302
506#define SRR_DP83815_D 0x0403
507#define SRR_DP83816_A4 0x0504
508#define SRR_DP83816_A5 0x0505
509
510/* The Rx and Tx buffer descriptors. */
511/* Note that using only 32 bit fields simplifies conversion to big-endian
512 architectures. */
513struct netdev_desc {
Al Viroeca1ad82008-03-16 22:21:54 +0000514 __le32 next_desc;
515 __le32 cmd_status;
516 __le32 addr;
517 __le32 software_use;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518};
519
520/* Bits in network_desc.status */
521enum desc_status_bits {
522 DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000,
523 DescNoCRC=0x10000000, DescPktOK=0x08000000,
524 DescSizeMask=0xfff,
525
526 DescTxAbort=0x04000000, DescTxFIFO=0x02000000,
527 DescTxCarrier=0x01000000, DescTxDefer=0x00800000,
528 DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000,
529 DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000,
530
531 DescRxAbort=0x04000000, DescRxOver=0x02000000,
532 DescRxDest=0x01800000, DescRxLong=0x00400000,
533 DescRxRunt=0x00200000, DescRxInvalid=0x00100000,
534 DescRxCRC=0x00080000, DescRxAlign=0x00040000,
535 DescRxLoop=0x00020000, DesRxColl=0x00010000,
536};
537
538struct netdev_private {
539 /* Descriptor rings first for alignment */
540 dma_addr_t ring_dma;
541 struct netdev_desc *rx_ring;
542 struct netdev_desc *tx_ring;
543 /* The addresses of receive-in-place skbuffs */
544 struct sk_buff *rx_skbuff[RX_RING_SIZE];
545 dma_addr_t rx_dma[RX_RING_SIZE];
546 /* address of a sent-in-place packet/buffer, for later free() */
547 struct sk_buff *tx_skbuff[TX_RING_SIZE];
548 dma_addr_t tx_dma[TX_RING_SIZE];
Stephen Hemmingerbea33482007-10-03 16:41:36 -0700549 struct net_device *dev;
550 struct napi_struct napi;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 /* Media monitoring timer */
552 struct timer_list timer;
553 /* Frequently used values: keep some adjacent for cache effect */
554 struct pci_dev *pci_dev;
555 struct netdev_desc *rx_head_desc;
556 /* Producer/consumer ring indices */
557 unsigned int cur_rx, dirty_rx;
558 unsigned int cur_tx, dirty_tx;
559 /* Based on MTU+slack. */
560 unsigned int rx_buf_sz;
561 int oom;
Mark Brownb27a16b2006-02-02 00:00:01 +0000562 /* Interrupt status */
563 u32 intr_status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700564 /* Do not touch the nic registers */
565 int hands_off;
Mark Brown68c90162007-02-19 20:15:39 +0000566 /* Don't pay attention to the reported link state. */
567 int ignore_phy;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568 /* external phy that is used: only valid if dev->if_port != PORT_TP */
569 int mii;
570 int phy_addr_external;
571 unsigned int full_duplex;
572 /* Rx filter */
573 u32 cur_rx_mode;
574 u32 rx_filter[16];
575 /* FIFO and PCI burst thresholds */
576 u32 tx_config, rx_config;
577 /* original contents of ClkRun register */
578 u32 SavedClkRun;
579 /* silicon revision */
580 u32 srr;
581 /* expected DSPCFG value */
582 u16 dspcfg;
Mark Brown1a147802007-05-03 10:36:56 +0100583 int dspcfg_workaround;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584 /* parms saved in ethtool format */
585 u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
586 u8 duplex; /* Duplex, half or full */
587 u8 autoneg; /* Autonegotiation enabled */
588 /* MII transceiver section */
589 u16 advertising;
590 unsigned int iosize;
591 spinlock_t lock;
592 u32 msg_enable;
Mark Browna8b4cf42006-03-28 14:08:55 -0800593 /* EEPROM data */
594 int eeprom_size;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595};
596
597static void move_int_phy(struct net_device *dev, int addr);
598static int eeprom_read(void __iomem *ioaddr, int location);
599static int mdio_read(struct net_device *dev, int reg);
600static void mdio_write(struct net_device *dev, int reg, u16 data);
601static void init_phy_fixup(struct net_device *dev);
602static int miiport_read(struct net_device *dev, int phy_id, int reg);
603static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data);
604static int find_mii(struct net_device *dev);
605static void natsemi_reset(struct net_device *dev);
606static void natsemi_reload_eeprom(struct net_device *dev);
607static void natsemi_stop_rxtx(struct net_device *dev);
608static int netdev_open(struct net_device *dev);
609static void do_cable_magic(struct net_device *dev);
610static void undo_cable_magic(struct net_device *dev);
611static void check_link(struct net_device *dev);
612static void netdev_timer(unsigned long data);
613static void dump_ring(struct net_device *dev);
Arjan van de Vened4cb132008-10-05 07:35:05 +0000614static void ns_tx_timeout(struct net_device *dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615static int alloc_ring(struct net_device *dev);
616static void refill_rx(struct net_device *dev);
617static void init_ring(struct net_device *dev);
618static void drain_tx(struct net_device *dev);
619static void drain_ring(struct net_device *dev);
620static void free_ring(struct net_device *dev);
621static void reinit_ring(struct net_device *dev);
622static void init_registers(struct net_device *dev);
Stephen Hemminger613573252009-08-31 19:50:58 +0000623static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100624static irqreturn_t intr_handler(int irq, void *dev_instance);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625static void netdev_error(struct net_device *dev, int intr_status);
Stephen Hemmingerbea33482007-10-03 16:41:36 -0700626static int natsemi_poll(struct napi_struct *napi, int budget);
Mark Brownb27a16b2006-02-02 00:00:01 +0000627static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700628static void netdev_tx_done(struct net_device *dev);
629static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
630#ifdef CONFIG_NET_POLL_CONTROLLER
631static void natsemi_poll_controller(struct net_device *dev);
632#endif
633static void __set_rx_mode(struct net_device *dev);
634static void set_rx_mode(struct net_device *dev);
635static void __get_stats(struct net_device *dev);
636static struct net_device_stats *get_stats(struct net_device *dev);
637static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
638static int netdev_set_wol(struct net_device *dev, u32 newval);
639static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur);
640static int netdev_set_sopass(struct net_device *dev, u8 *newval);
641static int netdev_get_sopass(struct net_device *dev, u8 *data);
642static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd);
643static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd);
644static void enable_wol_mode(struct net_device *dev, int enable_intr);
645static int netdev_close(struct net_device *dev);
646static int netdev_get_regs(struct net_device *dev, u8 *buf);
647static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
Jeff Garzik7282d492006-09-13 14:30:00 -0400648static const struct ethtool_ops ethtool_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649
Mark Brown1a147802007-05-03 10:36:56 +0100650#define NATSEMI_ATTR(_name) \
651static ssize_t natsemi_show_##_name(struct device *dev, \
652 struct device_attribute *attr, char *buf); \
653 static ssize_t natsemi_set_##_name(struct device *dev, \
654 struct device_attribute *attr, \
655 const char *buf, size_t count); \
656 static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name)
657
658#define NATSEMI_CREATE_FILE(_dev, _name) \
659 device_create_file(&_dev->dev, &dev_attr_##_name)
660#define NATSEMI_REMOVE_FILE(_dev, _name) \
Jeff Garzikf6c42862007-07-17 00:01:09 -0400661 device_remove_file(&_dev->dev, &dev_attr_##_name)
Mark Brown1a147802007-05-03 10:36:56 +0100662
663NATSEMI_ATTR(dspcfg_workaround);
664
665static ssize_t natsemi_show_dspcfg_workaround(struct device *dev,
Jeff Garzik7d2e3cb2008-05-13 01:41:58 -0400666 struct device_attribute *attr,
Mark Brown1a147802007-05-03 10:36:56 +0100667 char *buf)
668{
669 struct netdev_private *np = netdev_priv(to_net_dev(dev));
670
671 return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off");
672}
673
674static ssize_t natsemi_set_dspcfg_workaround(struct device *dev,
675 struct device_attribute *attr,
676 const char *buf, size_t count)
677{
678 struct netdev_private *np = netdev_priv(to_net_dev(dev));
679 int new_setting;
Gregory Haskinsd41f2d12007-06-15 17:17:50 -0400680 unsigned long flags;
Mark Brown1a147802007-05-03 10:36:56 +0100681
682 /* Find out the new setting */
683 if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
684 new_setting = 1;
Joe Perches8e95a202009-12-03 07:58:21 +0000685 else if (!strncmp("off", buf, count - 1) ||
686 !strncmp("0", buf, count - 1))
Mark Brown1a147802007-05-03 10:36:56 +0100687 new_setting = 0;
688 else
Jeff Garzik7d2e3cb2008-05-13 01:41:58 -0400689 return count;
Mark Brown1a147802007-05-03 10:36:56 +0100690
691 spin_lock_irqsave(&np->lock, flags);
692
693 np->dspcfg_workaround = new_setting;
694
695 spin_unlock_irqrestore(&np->lock, flags);
696
697 return count;
698}
699
Linus Torvalds1da177e2005-04-16 15:20:36 -0700700static inline void __iomem *ns_ioaddr(struct net_device *dev)
701{
702 return (void __iomem *) dev->base_addr;
703}
704
Mark Brownb27a16b2006-02-02 00:00:01 +0000705static inline void natsemi_irq_enable(struct net_device *dev)
706{
707 writel(1, ns_ioaddr(dev) + IntrEnable);
708 readl(ns_ioaddr(dev) + IntrEnable);
709}
710
711static inline void natsemi_irq_disable(struct net_device *dev)
712{
713 writel(0, ns_ioaddr(dev) + IntrEnable);
714 readl(ns_ioaddr(dev) + IntrEnable);
715}
716
Linus Torvalds1da177e2005-04-16 15:20:36 -0700717static void move_int_phy(struct net_device *dev, int addr)
718{
719 struct netdev_private *np = netdev_priv(dev);
720 void __iomem *ioaddr = ns_ioaddr(dev);
721 int target = 31;
722
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400723 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724 * The internal phy is visible on the external mii bus. Therefore we must
725 * move it away before we can send commands to an external phy.
726 * There are two addresses we must avoid:
727 * - the address on the external phy that is used for transmission.
728 * - the address that we want to access. User space can access phys
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300729 * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730 * phy that is used for transmission.
731 */
732
733 if (target == addr)
734 target--;
735 if (target == np->phy_addr_external)
736 target--;
737 writew(target, ioaddr + PhyCtrl);
738 readw(ioaddr + PhyCtrl);
739 udelay(1);
740}
741
Jeff Garzik5a40f092006-06-26 22:24:03 -0400742static void __devinit natsemi_init_media (struct net_device *dev)
743{
744 struct netdev_private *np = netdev_priv(dev);
745 u32 tmp;
746
Mark Brown68c90162007-02-19 20:15:39 +0000747 if (np->ignore_phy)
748 netif_carrier_on(dev);
749 else
750 netif_carrier_off(dev);
Jeff Garzik5a40f092006-06-26 22:24:03 -0400751
752 /* get the initial settings from hardware */
753 tmp = mdio_read(dev, MII_BMCR);
754 np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10;
755 np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF;
756 np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
757 np->advertising= mdio_read(dev, MII_ADVERTISE);
758
Joe Perches8e95a202009-12-03 07:58:21 +0000759 if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL &&
760 netif_msg_probe(np)) {
Jeff Garzik5a40f092006-06-26 22:24:03 -0400761 printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
762 "10%s %s duplex.\n",
763 pci_name(np->pci_dev),
764 (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)?
765 "enabled, advertise" : "disabled, force",
766 (np->advertising &
767 (ADVERTISE_100FULL|ADVERTISE_100HALF))?
768 "0" : "",
769 (np->advertising &
770 (ADVERTISE_100FULL|ADVERTISE_10FULL))?
771 "full" : "half");
772 }
773 if (netif_msg_probe(np))
774 printk(KERN_INFO
775 "natsemi %s: Transceiver status %#04x advertising %#04x.\n",
776 pci_name(np->pci_dev), mdio_read(dev, MII_BMSR),
777 np->advertising);
778
779}
780
Stephen Hemminger2b7d0c72009-01-07 17:57:19 -0800781static const struct net_device_ops natsemi_netdev_ops = {
782 .ndo_open = netdev_open,
783 .ndo_stop = netdev_close,
784 .ndo_start_xmit = start_tx,
785 .ndo_get_stats = get_stats,
786 .ndo_set_multicast_list = set_rx_mode,
787 .ndo_change_mtu = natsemi_change_mtu,
788 .ndo_do_ioctl = netdev_ioctl,
789 .ndo_tx_timeout = ns_tx_timeout,
790 .ndo_set_mac_address = eth_mac_addr,
791 .ndo_validate_addr = eth_validate_addr,
792#ifdef CONFIG_NET_POLL_CONTROLLER
793 .ndo_poll_controller = natsemi_poll_controller,
794#endif
795};
796
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797static int __devinit natsemi_probe1 (struct pci_dev *pdev,
798 const struct pci_device_id *ent)
799{
800 struct net_device *dev;
801 struct netdev_private *np;
802 int i, option, irq, chip_idx = ent->driver_data;
803 static int find_cnt = -1;
Sergei Shtylyov703bb992008-04-12 20:58:30 +0400804 resource_size_t iostart;
805 unsigned long iosize;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 void __iomem *ioaddr;
807 const int pcibar = 1; /* PCI base address register */
808 int prev_eedata;
809 u32 tmp;
810
811/* when built into the kernel, we only print version if device is found */
812#ifndef MODULE
813 static int printed_version;
814 if (!printed_version++)
815 printk(version);
816#endif
817
818 i = pci_enable_device(pdev);
819 if (i) return i;
820
821 /* natsemi has a non-standard PM control register
822 * in PCI config space. Some boards apparently need
823 * to be brought to D0 in this manner.
824 */
825 pci_read_config_dword(pdev, PCIPM, &tmp);
826 if (tmp & PCI_PM_CTRL_STATE_MASK) {
827 /* D0 state, disable PME assertion */
828 u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK;
829 pci_write_config_dword(pdev, PCIPM, newtmp);
830 }
831
832 find_cnt++;
833 iostart = pci_resource_start(pdev, pcibar);
834 iosize = pci_resource_len(pdev, pcibar);
835 irq = pdev->irq;
836
Jeff Garzika2b524b2006-06-26 22:48:38 -0400837 pci_set_master(pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838
839 dev = alloc_etherdev(sizeof (struct netdev_private));
840 if (!dev)
841 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 SET_NETDEV_DEV(dev, &pdev->dev);
843
844 i = pci_request_regions(pdev, DRV_NAME);
845 if (i)
846 goto err_pci_request_regions;
847
848 ioaddr = ioremap(iostart, iosize);
849 if (!ioaddr) {
850 i = -ENOMEM;
851 goto err_ioremap;
852 }
853
854 /* Work around the dropped serial bit. */
855 prev_eedata = eeprom_read(ioaddr, 6);
856 for (i = 0; i < 3; i++) {
857 int eedata = eeprom_read(ioaddr, i + 7);
858 dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15);
859 dev->dev_addr[i*2+1] = eedata >> 7;
860 prev_eedata = eedata;
861 }
862
Otavio Salvador3d894a92011-04-12 05:30:41 +0000863 /* Store MAC Address in perm_addr */
864 memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
865
Linus Torvalds1da177e2005-04-16 15:20:36 -0700866 dev->base_addr = (unsigned long __force) ioaddr;
867 dev->irq = irq;
868
869 np = netdev_priv(dev);
Stephen Hemmingerbea33482007-10-03 16:41:36 -0700870 netif_napi_add(dev, &np->napi, natsemi_poll, 64);
Ingo Molnarbbbab5c2007-10-24 13:58:57 +0200871 np->dev = dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872
873 np->pci_dev = pdev;
874 pci_set_drvdata(pdev, dev);
875 np->iosize = iosize;
876 spin_lock_init(&np->lock);
877 np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
878 np->hands_off = 0;
Mark Brownb27a16b2006-02-02 00:00:01 +0000879 np->intr_status = 0;
Jeff Garzika2b524b2006-06-26 22:48:38 -0400880 np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
Mark Brown6aab4442007-02-19 20:15:40 +0000881 if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY)
882 np->ignore_phy = 1;
883 else
884 np->ignore_phy = 0;
Mark Brown1a147802007-05-03 10:36:56 +0100885 np->dspcfg_workaround = dspcfg_workaround;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700886
887 /* Initial port:
Mark Brown68c90162007-02-19 20:15:39 +0000888 * - If configured to ignore the PHY set up for external.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700889 * - If the nic was configured to use an external phy and if find_mii
890 * finds a phy: use external port, first phy that replies.
891 * - Otherwise: internal port.
892 * Note that the phy address for the internal phy doesn't matter:
893 * The address would be used to access a phy over the mii bus, but
894 * the internal phy is accessed through mapped registers.
895 */
Mark Brown68c90162007-02-19 20:15:39 +0000896 if (np->ignore_phy || readl(ioaddr + ChipConfig) & CfgExtPhy)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700897 dev->if_port = PORT_MII;
898 else
899 dev->if_port = PORT_TP;
900 /* Reset the chip to erase previous misconfiguration. */
901 natsemi_reload_eeprom(dev);
902 natsemi_reset(dev);
903
904 if (dev->if_port != PORT_TP) {
905 np->phy_addr_external = find_mii(dev);
Mark Brown68c90162007-02-19 20:15:39 +0000906 /* If we're ignoring the PHY it doesn't matter if we can't
907 * find one. */
908 if (!np->ignore_phy && np->phy_addr_external == PHY_ADDR_NONE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700909 dev->if_port = PORT_TP;
910 np->phy_addr_external = PHY_ADDR_INTERNAL;
911 }
912 } else {
913 np->phy_addr_external = PHY_ADDR_INTERNAL;
914 }
915
916 option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
917 if (dev->mem_start)
918 option = dev->mem_start;
919
920 /* The lower four bits are the media type. */
921 if (option) {
922 if (option & 0x200)
923 np->full_duplex = 1;
924 if (option & 15)
925 printk(KERN_INFO
926 "natsemi %s: ignoring user supplied media type %d",
927 pci_name(np->pci_dev), option & 15);
928 }
929 if (find_cnt < MAX_UNITS && full_duplex[find_cnt])
930 np->full_duplex = 1;
931
Stephen Hemminger2b7d0c72009-01-07 17:57:19 -0800932 dev->netdev_ops = &natsemi_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933 dev->watchdog_timeo = TX_TIMEOUT;
Mark Brownb27a16b2006-02-02 00:00:01 +0000934
Linus Torvalds1da177e2005-04-16 15:20:36 -0700935 SET_ETHTOOL_OPS(dev, &ethtool_ops);
936
937 if (mtu)
938 dev->mtu = mtu;
939
Jeff Garzik5a40f092006-06-26 22:24:03 -0400940 natsemi_init_media(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700941
942 /* save the silicon revision for later querying */
943 np->srr = readl(ioaddr + SiliconRev);
944 if (netif_msg_hw(np))
945 printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n",
946 pci_name(np->pci_dev), np->srr);
947
948 i = register_netdev(dev);
949 if (i)
950 goto err_register_netdev;
951
Mark Brown1a147802007-05-03 10:36:56 +0100952 if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround))
953 goto err_create_file;
954
Linus Torvalds1da177e2005-04-16 15:20:36 -0700955 if (netif_msg_drv(np)) {
Sergei Shtylyov703bb992008-04-12 20:58:30 +0400956 printk(KERN_INFO "natsemi %s: %s at %#08llx "
Johannes Berge1749612008-10-27 15:59:26 -0700957 "(%s), %pM, IRQ %d",
Sergei Shtylyov703bb992008-04-12 20:58:30 +0400958 dev->name, natsemi_pci_info[chip_idx].name,
959 (unsigned long long)iostart, pci_name(np->pci_dev),
Johannes Berge1749612008-10-27 15:59:26 -0700960 dev->dev_addr, irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700961 if (dev->if_port == PORT_TP)
962 printk(", port TP.\n");
Mark Brown68c90162007-02-19 20:15:39 +0000963 else if (np->ignore_phy)
964 printk(", port MII, ignoring PHY\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700965 else
966 printk(", port MII, phy ad %d.\n", np->phy_addr_external);
967 }
968 return 0;
969
Mark Brown1a147802007-05-03 10:36:56 +0100970 err_create_file:
971 unregister_netdev(dev);
972
Linus Torvalds1da177e2005-04-16 15:20:36 -0700973 err_register_netdev:
974 iounmap(ioaddr);
975
976 err_ioremap:
977 pci_release_regions(pdev);
978 pci_set_drvdata(pdev, NULL);
979
980 err_pci_request_regions:
981 free_netdev(dev);
982 return i;
983}
984
985
986/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
987 The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */
988
989/* Delay between EEPROM clock transitions.
990 No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
991 a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that
992 made udelay() unreliable.
993 The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
Rolf Eike Beer405bbe92007-10-20 03:10:57 +0200994 deprecated.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700995*/
996#define eeprom_delay(ee_addr) readl(ee_addr)
997
998#define EE_Write0 (EE_ChipSelect)
999#define EE_Write1 (EE_ChipSelect | EE_DataIn)
1000
1001/* The EEPROM commands include the alway-set leading bit. */
1002enum EEPROM_Cmds {
1003 EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
1004};
1005
1006static int eeprom_read(void __iomem *addr, int location)
1007{
1008 int i;
1009 int retval = 0;
1010 void __iomem *ee_addr = addr + EECtrl;
1011 int read_cmd = location | EE_ReadCmd;
1012
1013 writel(EE_Write0, ee_addr);
1014
1015 /* Shift the read command bits out. */
1016 for (i = 10; i >= 0; i--) {
1017 short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
1018 writel(dataval, ee_addr);
1019 eeprom_delay(ee_addr);
1020 writel(dataval | EE_ShiftClk, ee_addr);
1021 eeprom_delay(ee_addr);
1022 }
1023 writel(EE_ChipSelect, ee_addr);
1024 eeprom_delay(ee_addr);
1025
1026 for (i = 0; i < 16; i++) {
1027 writel(EE_ChipSelect | EE_ShiftClk, ee_addr);
1028 eeprom_delay(ee_addr);
1029 retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0;
1030 writel(EE_ChipSelect, ee_addr);
1031 eeprom_delay(ee_addr);
1032 }
1033
1034 /* Terminate the EEPROM access. */
1035 writel(EE_Write0, ee_addr);
1036 writel(0, ee_addr);
1037 return retval;
1038}
1039
1040/* MII transceiver control section.
1041 * The 83815 series has an internal transceiver, and we present the
1042 * internal management registers as if they were MII connected.
1043 * External Phy registers are referenced through the MII interface.
1044 */
1045
1046/* clock transitions >= 20ns (25MHz)
1047 * One readl should be good to PCI @ 100MHz
1048 */
1049#define mii_delay(ioaddr) readl(ioaddr + EECtrl)
1050
1051static int mii_getbit (struct net_device *dev)
1052{
1053 int data;
1054 void __iomem *ioaddr = ns_ioaddr(dev);
1055
1056 writel(MII_ShiftClk, ioaddr + EECtrl);
1057 data = readl(ioaddr + EECtrl);
1058 writel(0, ioaddr + EECtrl);
1059 mii_delay(ioaddr);
1060 return (data & MII_Data)? 1 : 0;
1061}
1062
1063static void mii_send_bits (struct net_device *dev, u32 data, int len)
1064{
1065 u32 i;
1066 void __iomem *ioaddr = ns_ioaddr(dev);
1067
1068 for (i = (1 << (len-1)); i; i >>= 1)
1069 {
1070 u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0);
1071 writel(mdio_val, ioaddr + EECtrl);
1072 mii_delay(ioaddr);
1073 writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl);
1074 mii_delay(ioaddr);
1075 }
1076 writel(0, ioaddr + EECtrl);
1077 mii_delay(ioaddr);
1078}
1079
1080static int miiport_read(struct net_device *dev, int phy_id, int reg)
1081{
1082 u32 cmd;
1083 int i;
1084 u32 retval = 0;
1085
1086 /* Ensure sync */
1087 mii_send_bits (dev, 0xffffffff, 32);
1088 /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
1089 /* ST,OP = 0110'b for read operation */
1090 cmd = (0x06 << 10) | (phy_id << 5) | reg;
1091 mii_send_bits (dev, cmd, 14);
1092 /* Turnaround */
1093 if (mii_getbit (dev))
1094 return 0;
1095 /* Read data */
1096 for (i = 0; i < 16; i++) {
1097 retval <<= 1;
1098 retval |= mii_getbit (dev);
1099 }
1100 /* End cycle */
1101 mii_getbit (dev);
1102 return retval;
1103}
1104
1105static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data)
1106{
1107 u32 cmd;
1108
1109 /* Ensure sync */
1110 mii_send_bits (dev, 0xffffffff, 32);
1111 /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
1112 /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */
1113 cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data;
1114 mii_send_bits (dev, cmd, 32);
1115 /* End cycle */
1116 mii_getbit (dev);
1117}
1118
1119static int mdio_read(struct net_device *dev, int reg)
1120{
1121 struct netdev_private *np = netdev_priv(dev);
1122 void __iomem *ioaddr = ns_ioaddr(dev);
1123
1124 /* The 83815 series has two ports:
1125 * - an internal transceiver
1126 * - an external mii bus
1127 */
1128 if (dev->if_port == PORT_TP)
1129 return readw(ioaddr+BasicControl+(reg<<2));
1130 else
1131 return miiport_read(dev, np->phy_addr_external, reg);
1132}
1133
1134static void mdio_write(struct net_device *dev, int reg, u16 data)
1135{
1136 struct netdev_private *np = netdev_priv(dev);
1137 void __iomem *ioaddr = ns_ioaddr(dev);
1138
1139 /* The 83815 series has an internal transceiver; handle separately */
1140 if (dev->if_port == PORT_TP)
1141 writew(data, ioaddr+BasicControl+(reg<<2));
1142 else
1143 miiport_write(dev, np->phy_addr_external, reg, data);
1144}
1145
1146static void init_phy_fixup(struct net_device *dev)
1147{
1148 struct netdev_private *np = netdev_priv(dev);
1149 void __iomem *ioaddr = ns_ioaddr(dev);
1150 int i;
1151 u32 cfg;
1152 u16 tmp;
1153
1154 /* restore stuff lost when power was out */
1155 tmp = mdio_read(dev, MII_BMCR);
1156 if (np->autoneg == AUTONEG_ENABLE) {
1157 /* renegotiate if something changed */
Joe Perches8e95a202009-12-03 07:58:21 +00001158 if ((tmp & BMCR_ANENABLE) == 0 ||
1159 np->advertising != mdio_read(dev, MII_ADVERTISE))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160 {
1161 /* turn on autonegotiation and force negotiation */
1162 tmp |= (BMCR_ANENABLE | BMCR_ANRESTART);
1163 mdio_write(dev, MII_ADVERTISE, np->advertising);
1164 }
1165 } else {
1166 /* turn off auto negotiation, set speed and duplexity */
1167 tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
1168 if (np->speed == SPEED_100)
1169 tmp |= BMCR_SPEED100;
1170 if (np->duplex == DUPLEX_FULL)
1171 tmp |= BMCR_FULLDPLX;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001172 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001173 * Note: there is no good way to inform the link partner
1174 * that our capabilities changed. The user has to unplug
1175 * and replug the network cable after some changes, e.g.
1176 * after switching from 10HD, autoneg off to 100 HD,
1177 * autoneg off.
1178 */
1179 }
1180 mdio_write(dev, MII_BMCR, tmp);
1181 readl(ioaddr + ChipConfig);
1182 udelay(1);
1183
1184 /* find out what phy this is */
1185 np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
1186 + mdio_read(dev, MII_PHYSID2);
1187
1188 /* handle external phys here */
1189 switch (np->mii) {
1190 case PHYID_AM79C874:
1191 /* phy specific configuration for fibre/tp operation */
1192 tmp = mdio_read(dev, MII_MCTRL);
1193 tmp &= ~(MII_FX_SEL | MII_EN_SCRM);
1194 if (dev->if_port == PORT_FIBRE)
1195 tmp |= MII_FX_SEL;
1196 else
1197 tmp |= MII_EN_SCRM;
1198 mdio_write(dev, MII_MCTRL, tmp);
1199 break;
1200 default:
1201 break;
1202 }
1203 cfg = readl(ioaddr + ChipConfig);
1204 if (cfg & CfgExtPhy)
1205 return;
1206
1207 /* On page 78 of the spec, they recommend some settings for "optimum
1208 performance" to be done in sequence. These settings optimize some
1209 of the 100Mbit autodetection circuitry. They say we only want to
1210 do this for rev C of the chip, but engineers at NSC (Bradley
1211 Kennedy) recommends always setting them. If you don't, you get
1212 errors on some autonegotiations that make the device unusable.
1213
1214 It seems that the DSP needs a few usec to reinitialize after
1215 the start of the phy. Just retry writing these values until they
1216 stick.
1217 */
1218 for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
1219
1220 int dspcfg;
1221 writew(1, ioaddr + PGSEL);
1222 writew(PMDCSR_VAL, ioaddr + PMDCSR);
1223 writew(TSTDAT_VAL, ioaddr + TSTDAT);
1224 np->dspcfg = (np->srr <= SRR_DP83815_C)?
1225 DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG));
1226 writew(np->dspcfg, ioaddr + DSPCFG);
1227 writew(SDCFG_VAL, ioaddr + SDCFG);
1228 writew(0, ioaddr + PGSEL);
1229 readl(ioaddr + ChipConfig);
1230 udelay(10);
1231
1232 writew(1, ioaddr + PGSEL);
1233 dspcfg = readw(ioaddr + DSPCFG);
1234 writew(0, ioaddr + PGSEL);
1235 if (np->dspcfg == dspcfg)
1236 break;
1237 }
1238
1239 if (netif_msg_link(np)) {
1240 if (i==NATSEMI_HW_TIMEOUT) {
1241 printk(KERN_INFO
1242 "%s: DSPCFG mismatch after retrying for %d usec.\n",
1243 dev->name, i*10);
1244 } else {
1245 printk(KERN_INFO
1246 "%s: DSPCFG accepted after %d usec.\n",
1247 dev->name, i*10);
1248 }
1249 }
1250 /*
1251 * Enable PHY Specific event based interrupts. Link state change
1252 * and Auto-Negotiation Completion are among the affected.
1253 * Read the intr status to clear it (needed for wake events).
1254 */
1255 readw(ioaddr + MIntrStatus);
1256 writew(MICRIntEn, ioaddr + MIntrCtrl);
1257}
1258
1259static int switch_port_external(struct net_device *dev)
1260{
1261 struct netdev_private *np = netdev_priv(dev);
1262 void __iomem *ioaddr = ns_ioaddr(dev);
1263 u32 cfg;
1264
1265 cfg = readl(ioaddr + ChipConfig);
1266 if (cfg & CfgExtPhy)
1267 return 0;
1268
1269 if (netif_msg_link(np)) {
1270 printk(KERN_INFO "%s: switching to external transceiver.\n",
1271 dev->name);
1272 }
1273
1274 /* 1) switch back to external phy */
1275 writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig);
1276 readl(ioaddr + ChipConfig);
1277 udelay(1);
1278
1279 /* 2) reset the external phy: */
1280 /* resetting the external PHY has been known to cause a hub supplying
1281 * power over Ethernet to kill the power. We don't want to kill
1282 * power to this computer, so we avoid resetting the phy.
1283 */
1284
1285 /* 3) reinit the phy fixup, it got lost during power down. */
1286 move_int_phy(dev, np->phy_addr_external);
1287 init_phy_fixup(dev);
1288
1289 return 1;
1290}
1291
1292static int switch_port_internal(struct net_device *dev)
1293{
1294 struct netdev_private *np = netdev_priv(dev);
1295 void __iomem *ioaddr = ns_ioaddr(dev);
1296 int i;
1297 u32 cfg;
1298 u16 bmcr;
1299
1300 cfg = readl(ioaddr + ChipConfig);
1301 if (!(cfg &CfgExtPhy))
1302 return 0;
1303
1304 if (netif_msg_link(np)) {
1305 printk(KERN_INFO "%s: switching to internal transceiver.\n",
1306 dev->name);
1307 }
1308 /* 1) switch back to internal phy: */
1309 cfg = cfg & ~(CfgExtPhy | CfgPhyDis);
1310 writel(cfg, ioaddr + ChipConfig);
1311 readl(ioaddr + ChipConfig);
1312 udelay(1);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001313
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314 /* 2) reset the internal phy: */
1315 bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
1316 writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2));
1317 readl(ioaddr + ChipConfig);
1318 udelay(10);
1319 for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
1320 bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
1321 if (!(bmcr & BMCR_RESET))
1322 break;
1323 udelay(10);
1324 }
1325 if (i==NATSEMI_HW_TIMEOUT && netif_msg_link(np)) {
1326 printk(KERN_INFO
1327 "%s: phy reset did not complete in %d usec.\n",
1328 dev->name, i*10);
1329 }
1330 /* 3) reinit the phy fixup, it got lost during power down. */
1331 init_phy_fixup(dev);
1332
1333 return 1;
1334}
1335
1336/* Scan for a PHY on the external mii bus.
1337 * There are two tricky points:
1338 * - Do not scan while the internal phy is enabled. The internal phy will
1339 * crash: e.g. reads from the DSPCFG register will return odd values and
1340 * the nasty random phy reset code will reset the nic every few seconds.
1341 * - The internal phy must be moved around, an external phy could
1342 * have the same address as the internal phy.
1343 */
1344static int find_mii(struct net_device *dev)
1345{
1346 struct netdev_private *np = netdev_priv(dev);
1347 int tmp;
1348 int i;
1349 int did_switch;
1350
1351 /* Switch to external phy */
1352 did_switch = switch_port_external(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001353
Linus Torvalds1da177e2005-04-16 15:20:36 -07001354 /* Scan the possible phy addresses:
1355 *
1356 * PHY address 0 means that the phy is in isolate mode. Not yet
1357 * supported due to lack of test hardware. User space should
1358 * handle it through ethtool.
1359 */
1360 for (i = 1; i <= 31; i++) {
1361 move_int_phy(dev, i);
1362 tmp = miiport_read(dev, i, MII_BMSR);
1363 if (tmp != 0xffff && tmp != 0x0000) {
1364 /* found something! */
1365 np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
1366 + mdio_read(dev, MII_PHYSID2);
1367 if (netif_msg_probe(np)) {
1368 printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n",
1369 pci_name(np->pci_dev), np->mii, i);
1370 }
1371 break;
1372 }
1373 }
1374 /* And switch back to internal phy: */
1375 if (did_switch)
1376 switch_port_internal(dev);
1377 return i;
1378}
1379
1380/* CFG bits [13:16] [18:23] */
1381#define CFG_RESET_SAVE 0xfde000
1382/* WCSR bits [0:4] [9:10] */
1383#define WCSR_RESET_SAVE 0x61f
1384/* RFCR bits [20] [22] [27:31] */
1385#define RFCR_RESET_SAVE 0xf8500000;
1386
1387static void natsemi_reset(struct net_device *dev)
1388{
1389 int i;
1390 u32 cfg;
1391 u32 wcsr;
1392 u32 rfcr;
1393 u16 pmatch[3];
1394 u16 sopass[3];
1395 struct netdev_private *np = netdev_priv(dev);
1396 void __iomem *ioaddr = ns_ioaddr(dev);
1397
1398 /*
1399 * Resetting the chip causes some registers to be lost.
1400 * Natsemi suggests NOT reloading the EEPROM while live, so instead
1401 * we save the state that would have been loaded from EEPROM
1402 * on a normal power-up (see the spec EEPROM map). This assumes
1403 * whoever calls this will follow up with init_registers() eventually.
1404 */
1405
1406 /* CFG */
1407 cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE;
1408 /* WCSR */
1409 wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE;
1410 /* RFCR */
1411 rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE;
1412 /* PMATCH */
1413 for (i = 0; i < 3; i++) {
1414 writel(i*2, ioaddr + RxFilterAddr);
1415 pmatch[i] = readw(ioaddr + RxFilterData);
1416 }
1417 /* SOPAS */
1418 for (i = 0; i < 3; i++) {
1419 writel(0xa+(i*2), ioaddr + RxFilterAddr);
1420 sopass[i] = readw(ioaddr + RxFilterData);
1421 }
1422
1423 /* now whack the chip */
1424 writel(ChipReset, ioaddr + ChipCmd);
1425 for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
1426 if (!(readl(ioaddr + ChipCmd) & ChipReset))
1427 break;
1428 udelay(5);
1429 }
1430 if (i==NATSEMI_HW_TIMEOUT) {
1431 printk(KERN_WARNING "%s: reset did not complete in %d usec.\n",
1432 dev->name, i*5);
1433 } else if (netif_msg_hw(np)) {
1434 printk(KERN_DEBUG "%s: reset completed in %d usec.\n",
1435 dev->name, i*5);
1436 }
1437
1438 /* restore CFG */
1439 cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE;
1440 /* turn on external phy if it was selected */
1441 if (dev->if_port == PORT_TP)
1442 cfg &= ~(CfgExtPhy | CfgPhyDis);
1443 else
1444 cfg |= (CfgExtPhy | CfgPhyDis);
1445 writel(cfg, ioaddr + ChipConfig);
1446 /* restore WCSR */
1447 wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE;
1448 writel(wcsr, ioaddr + WOLCmd);
1449 /* read RFCR */
1450 rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE;
1451 /* restore PMATCH */
1452 for (i = 0; i < 3; i++) {
1453 writel(i*2, ioaddr + RxFilterAddr);
1454 writew(pmatch[i], ioaddr + RxFilterData);
1455 }
1456 for (i = 0; i < 3; i++) {
1457 writel(0xa+(i*2), ioaddr + RxFilterAddr);
1458 writew(sopass[i], ioaddr + RxFilterData);
1459 }
1460 /* restore RFCR */
1461 writel(rfcr, ioaddr + RxFilterAddr);
1462}
1463
Mark Browne72fd962006-02-02 00:00:02 +00001464static void reset_rx(struct net_device *dev)
1465{
1466 int i;
1467 struct netdev_private *np = netdev_priv(dev);
1468 void __iomem *ioaddr = ns_ioaddr(dev);
1469
1470 np->intr_status &= ~RxResetDone;
1471
1472 writel(RxReset, ioaddr + ChipCmd);
1473
1474 for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
1475 np->intr_status |= readl(ioaddr + IntrStatus);
1476 if (np->intr_status & RxResetDone)
1477 break;
1478 udelay(15);
1479 }
1480 if (i==NATSEMI_HW_TIMEOUT) {
1481 printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n",
1482 dev->name, i*15);
1483 } else if (netif_msg_hw(np)) {
1484 printk(KERN_WARNING "%s: RX reset took %d usec.\n",
1485 dev->name, i*15);
1486 }
1487}
1488
Linus Torvalds1da177e2005-04-16 15:20:36 -07001489static void natsemi_reload_eeprom(struct net_device *dev)
1490{
1491 struct netdev_private *np = netdev_priv(dev);
1492 void __iomem *ioaddr = ns_ioaddr(dev);
1493 int i;
1494
1495 writel(EepromReload, ioaddr + PCIBusCfg);
1496 for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
1497 udelay(50);
1498 if (!(readl(ioaddr + PCIBusCfg) & EepromReload))
1499 break;
1500 }
1501 if (i==NATSEMI_HW_TIMEOUT) {
1502 printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n",
1503 pci_name(np->pci_dev), i*50);
1504 } else if (netif_msg_hw(np)) {
1505 printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n",
1506 pci_name(np->pci_dev), i*50);
1507 }
1508}
1509
1510static void natsemi_stop_rxtx(struct net_device *dev)
1511{
1512 void __iomem * ioaddr = ns_ioaddr(dev);
1513 struct netdev_private *np = netdev_priv(dev);
1514 int i;
1515
1516 writel(RxOff | TxOff, ioaddr + ChipCmd);
1517 for(i=0;i< NATSEMI_HW_TIMEOUT;i++) {
1518 if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0)
1519 break;
1520 udelay(5);
1521 }
1522 if (i==NATSEMI_HW_TIMEOUT) {
1523 printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n",
1524 dev->name, i*5);
1525 } else if (netif_msg_hw(np)) {
1526 printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n",
1527 dev->name, i*5);
1528 }
1529}
1530
1531static int netdev_open(struct net_device *dev)
1532{
1533 struct netdev_private *np = netdev_priv(dev);
1534 void __iomem * ioaddr = ns_ioaddr(dev);
1535 int i;
1536
1537 /* Reset the chip, just in case. */
1538 natsemi_reset(dev);
1539
Joe Perchesa0607fd2009-11-18 23:29:17 -08001540 i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001541 if (i) return i;
1542
1543 if (netif_msg_ifup(np))
1544 printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
1545 dev->name, dev->irq);
1546 i = alloc_ring(dev);
1547 if (i < 0) {
1548 free_irq(dev->irq, dev);
1549 return i;
1550 }
Stephen Hemmingerbea33482007-10-03 16:41:36 -07001551 napi_enable(&np->napi);
1552
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553 init_ring(dev);
1554 spin_lock_irq(&np->lock);
1555 init_registers(dev);
1556 /* now set the MAC address according to dev->dev_addr */
1557 for (i = 0; i < 3; i++) {
1558 u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i];
1559
1560 writel(i*2, ioaddr + RxFilterAddr);
1561 writew(mac, ioaddr + RxFilterData);
1562 }
1563 writel(np->cur_rx_mode, ioaddr + RxFilterAddr);
1564 spin_unlock_irq(&np->lock);
1565
1566 netif_start_queue(dev);
1567
1568 if (netif_msg_ifup(np))
1569 printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n",
1570 dev->name, (int)readl(ioaddr + ChipCmd));
1571
1572 /* Set the timer to check for link beat. */
1573 init_timer(&np->timer);
Mark Brown0e5d5442007-10-10 11:05:44 +01001574 np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001575 np->timer.data = (unsigned long)dev;
Joe Perchesc061b182010-08-23 18:20:03 +00001576 np->timer.function = netdev_timer; /* timer handler */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001577 add_timer(&np->timer);
1578
1579 return 0;
1580}
1581
1582static void do_cable_magic(struct net_device *dev)
1583{
1584 struct netdev_private *np = netdev_priv(dev);
1585 void __iomem *ioaddr = ns_ioaddr(dev);
1586
1587 if (dev->if_port != PORT_TP)
1588 return;
1589
1590 if (np->srr >= SRR_DP83816_A5)
1591 return;
1592
1593 /*
1594 * 100 MBit links with short cables can trip an issue with the chip.
1595 * The problem manifests as lots of CRC errors and/or flickering
1596 * activity LED while idle. This process is based on instructions
1597 * from engineers at National.
1598 */
1599 if (readl(ioaddr + ChipConfig) & CfgSpeed100) {
1600 u16 data;
1601
1602 writew(1, ioaddr + PGSEL);
1603 /*
1604 * coefficient visibility should already be enabled via
1605 * DSPCFG | 0x1000
1606 */
1607 data = readw(ioaddr + TSTDAT) & 0xff;
1608 /*
1609 * the value must be negative, and within certain values
1610 * (these values all come from National)
1611 */
1612 if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) {
Stephen Hemmingerddfce6b2007-10-05 17:19:47 -07001613 np = netdev_priv(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001614
1615 /* the bug has been triggered - fix the coefficient */
1616 writew(TSTDAT_FIXED, ioaddr + TSTDAT);
1617 /* lock the value */
1618 data = readw(ioaddr + DSPCFG);
1619 np->dspcfg = data | DSPCFG_LOCK;
1620 writew(np->dspcfg, ioaddr + DSPCFG);
1621 }
1622 writew(0, ioaddr + PGSEL);
1623 }
1624}
1625
1626static void undo_cable_magic(struct net_device *dev)
1627{
1628 u16 data;
1629 struct netdev_private *np = netdev_priv(dev);
1630 void __iomem * ioaddr = ns_ioaddr(dev);
1631
1632 if (dev->if_port != PORT_TP)
1633 return;
1634
1635 if (np->srr >= SRR_DP83816_A5)
1636 return;
1637
1638 writew(1, ioaddr + PGSEL);
1639 /* make sure the lock bit is clear */
1640 data = readw(ioaddr + DSPCFG);
1641 np->dspcfg = data & ~DSPCFG_LOCK;
1642 writew(np->dspcfg, ioaddr + DSPCFG);
1643 writew(0, ioaddr + PGSEL);
1644}
1645
1646static void check_link(struct net_device *dev)
1647{
1648 struct netdev_private *np = netdev_priv(dev);
1649 void __iomem * ioaddr = ns_ioaddr(dev);
Mark Brown68c90162007-02-19 20:15:39 +00001650 int duplex = np->duplex;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001651 u16 bmsr;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001652
Mark Brown68c90162007-02-19 20:15:39 +00001653 /* If we are ignoring the PHY then don't try reading it. */
1654 if (np->ignore_phy)
1655 goto propagate_state;
1656
Linus Torvalds1da177e2005-04-16 15:20:36 -07001657 /* The link status field is latched: it remains low after a temporary
1658 * link failure until it's read. We need the current link status,
1659 * thus read twice.
1660 */
1661 mdio_read(dev, MII_BMSR);
1662 bmsr = mdio_read(dev, MII_BMSR);
1663
1664 if (!(bmsr & BMSR_LSTATUS)) {
1665 if (netif_carrier_ok(dev)) {
1666 if (netif_msg_link(np))
1667 printk(KERN_NOTICE "%s: link down.\n",
Mark Brown68c90162007-02-19 20:15:39 +00001668 dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669 netif_carrier_off(dev);
1670 undo_cable_magic(dev);
1671 }
1672 return;
1673 }
1674 if (!netif_carrier_ok(dev)) {
1675 if (netif_msg_link(np))
1676 printk(KERN_NOTICE "%s: link up.\n", dev->name);
1677 netif_carrier_on(dev);
1678 do_cable_magic(dev);
1679 }
1680
1681 duplex = np->full_duplex;
1682 if (!duplex) {
1683 if (bmsr & BMSR_ANEGCOMPLETE) {
1684 int tmp = mii_nway_result(
1685 np->advertising & mdio_read(dev, MII_LPA));
1686 if (tmp == LPA_100FULL || tmp == LPA_10FULL)
1687 duplex = 1;
1688 } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX)
1689 duplex = 1;
1690 }
1691
Mark Brown68c90162007-02-19 20:15:39 +00001692propagate_state:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001693 /* if duplex is set then bit 28 must be set, too */
1694 if (duplex ^ !!(np->rx_config & RxAcceptTx)) {
1695 if (netif_msg_link(np))
1696 printk(KERN_INFO
1697 "%s: Setting %s-duplex based on negotiated "
1698 "link capability.\n", dev->name,
1699 duplex ? "full" : "half");
1700 if (duplex) {
1701 np->rx_config |= RxAcceptTx;
1702 np->tx_config |= TxCarrierIgn | TxHeartIgn;
1703 } else {
1704 np->rx_config &= ~RxAcceptTx;
1705 np->tx_config &= ~(TxCarrierIgn | TxHeartIgn);
1706 }
1707 writel(np->tx_config, ioaddr + TxConfig);
1708 writel(np->rx_config, ioaddr + RxConfig);
1709 }
1710}
1711
1712static void init_registers(struct net_device *dev)
1713{
1714 struct netdev_private *np = netdev_priv(dev);
1715 void __iomem * ioaddr = ns_ioaddr(dev);
1716
1717 init_phy_fixup(dev);
1718
1719 /* clear any interrupts that are pending, such as wake events */
1720 readl(ioaddr + IntrStatus);
1721
1722 writel(np->ring_dma, ioaddr + RxRingPtr);
1723 writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc),
1724 ioaddr + TxRingPtr);
1725
1726 /* Initialize other registers.
1727 * Configure the PCI bus bursts and FIFO thresholds.
1728 * Configure for standard, in-spec Ethernet.
1729 * Start with half-duplex. check_link will update
1730 * to the correct settings.
1731 */
1732
1733 /* DRTH: 2: start tx if 64 bytes are in the fifo
1734 * FLTH: 0x10: refill with next packet if 512 bytes are free
1735 * MXDMA: 0: up to 256 byte bursts.
1736 * MXDMA must be <= FLTH
1737 * ECRETRY=1
1738 * ATP=1
1739 */
1740 np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 |
1741 TX_FLTH_VAL | TX_DRTH_VAL_START;
1742 writel(np->tx_config, ioaddr + TxConfig);
1743
1744 /* DRTH 0x10: start copying to memory if 128 bytes are in the fifo
1745 * MXDMA 0: up to 256 byte bursts
1746 */
1747 np->rx_config = RxMxdma_256 | RX_DRTH_VAL;
1748 /* if receive ring now has bigger buffers than normal, enable jumbo */
1749 if (np->rx_buf_sz > NATSEMI_LONGPKT)
1750 np->rx_config |= RxAcceptLong;
1751
1752 writel(np->rx_config, ioaddr + RxConfig);
1753
1754 /* Disable PME:
1755 * The PME bit is initialized from the EEPROM contents.
1756 * PCI cards probably have PME disabled, but motherboard
1757 * implementations may have PME set to enable WakeOnLan.
1758 * With PME set the chip will scan incoming packets but
1759 * nothing will be written to memory. */
1760 np->SavedClkRun = readl(ioaddr + ClkRun);
1761 writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun);
1762 if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) {
1763 printk(KERN_NOTICE "%s: Wake-up event %#08x\n",
1764 dev->name, readl(ioaddr + WOLCmd));
1765 }
1766
1767 check_link(dev);
1768 __set_rx_mode(dev);
1769
1770 /* Enable interrupts by setting the interrupt mask. */
1771 writel(DEFAULT_INTR, ioaddr + IntrMask);
broonie@sirena.org.uk14fdd902007-03-14 19:49:13 +00001772 natsemi_irq_enable(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001773
1774 writel(RxOn | TxOn, ioaddr + ChipCmd);
1775 writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */
1776}
1777
1778/*
1779 * netdev_timer:
1780 * Purpose:
1781 * 1) check for link changes. Usually they are handled by the MII interrupt
1782 * but it doesn't hurt to check twice.
1783 * 2) check for sudden death of the NIC:
1784 * It seems that a reference set for this chip went out with incorrect info,
1785 * and there exist boards that aren't quite right. An unexpected voltage
1786 * drop can cause the PHY to get itself in a weird state (basically reset).
Mark Brown1a147802007-05-03 10:36:56 +01001787 * NOTE: this only seems to affect revC chips. The user can disable
1788 * this check via dspcfg_workaround sysfs option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001789 * 3) check of death of the RX path due to OOM
1790 */
1791static void netdev_timer(unsigned long data)
1792{
1793 struct net_device *dev = (struct net_device *)data;
1794 struct netdev_private *np = netdev_priv(dev);
1795 void __iomem * ioaddr = ns_ioaddr(dev);
Mark Brownf2cade12007-10-09 22:57:39 +01001796 int next_tick = NATSEMI_TIMER_FREQ;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001797
1798 if (netif_msg_timer(np)) {
1799 /* DO NOT read the IntrStatus register,
1800 * a read clears any pending interrupts.
1801 */
1802 printk(KERN_DEBUG "%s: Media selection timer tick.\n",
1803 dev->name);
1804 }
1805
1806 if (dev->if_port == PORT_TP) {
1807 u16 dspcfg;
1808
1809 spin_lock_irq(&np->lock);
1810 /* check for a nasty random phy-reset - use dspcfg as a flag */
1811 writew(1, ioaddr+PGSEL);
1812 dspcfg = readw(ioaddr+DSPCFG);
1813 writew(0, ioaddr+PGSEL);
Mark Brown1a147802007-05-03 10:36:56 +01001814 if (np->dspcfg_workaround && dspcfg != np->dspcfg) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001815 if (!netif_queue_stopped(dev)) {
1816 spin_unlock_irq(&np->lock);
Mark Brownd0ed4862007-05-03 10:36:50 +01001817 if (netif_msg_drv(np))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001818 printk(KERN_NOTICE "%s: possible phy reset: "
1819 "re-initializing\n", dev->name);
1820 disable_irq(dev->irq);
1821 spin_lock_irq(&np->lock);
1822 natsemi_stop_rxtx(dev);
1823 dump_ring(dev);
1824 reinit_ring(dev);
1825 init_registers(dev);
1826 spin_unlock_irq(&np->lock);
1827 enable_irq(dev->irq);
1828 } else {
1829 /* hurry back */
1830 next_tick = HZ;
1831 spin_unlock_irq(&np->lock);
1832 }
1833 } else {
1834 /* init_registers() calls check_link() for the above case */
1835 check_link(dev);
1836 spin_unlock_irq(&np->lock);
1837 }
1838 } else {
1839 spin_lock_irq(&np->lock);
1840 check_link(dev);
1841 spin_unlock_irq(&np->lock);
1842 }
1843 if (np->oom) {
1844 disable_irq(dev->irq);
1845 np->oom = 0;
1846 refill_rx(dev);
1847 enable_irq(dev->irq);
1848 if (!np->oom) {
1849 writel(RxOn, ioaddr + ChipCmd);
1850 } else {
1851 next_tick = 1;
1852 }
1853 }
Mark Brown0e5d5442007-10-10 11:05:44 +01001854
1855 if (next_tick > 1)
1856 mod_timer(&np->timer, round_jiffies(jiffies + next_tick));
1857 else
1858 mod_timer(&np->timer, jiffies + next_tick);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001859}
1860
1861static void dump_ring(struct net_device *dev)
1862{
1863 struct netdev_private *np = netdev_priv(dev);
1864
1865 if (netif_msg_pktdata(np)) {
1866 int i;
1867 printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring);
1868 for (i = 0; i < TX_RING_SIZE; i++) {
1869 printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
1870 i, np->tx_ring[i].next_desc,
1871 np->tx_ring[i].cmd_status,
1872 np->tx_ring[i].addr);
1873 }
1874 printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring);
1875 for (i = 0; i < RX_RING_SIZE; i++) {
1876 printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
1877 i, np->rx_ring[i].next_desc,
1878 np->rx_ring[i].cmd_status,
1879 np->rx_ring[i].addr);
1880 }
1881 }
1882}
1883
Arjan van de Vened4cb132008-10-05 07:35:05 +00001884static void ns_tx_timeout(struct net_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001885{
1886 struct netdev_private *np = netdev_priv(dev);
1887 void __iomem * ioaddr = ns_ioaddr(dev);
1888
1889 disable_irq(dev->irq);
1890 spin_lock_irq(&np->lock);
1891 if (!np->hands_off) {
1892 if (netif_msg_tx_err(np))
1893 printk(KERN_WARNING
1894 "%s: Transmit timed out, status %#08x,"
1895 " resetting...\n",
1896 dev->name, readl(ioaddr + IntrStatus));
1897 dump_ring(dev);
1898
1899 natsemi_reset(dev);
1900 reinit_ring(dev);
1901 init_registers(dev);
1902 } else {
1903 printk(KERN_WARNING
1904 "%s: tx_timeout while in hands_off state?\n",
1905 dev->name);
1906 }
1907 spin_unlock_irq(&np->lock);
1908 enable_irq(dev->irq);
1909
Eric Dumazet1ae5dc32010-05-10 05:01:31 -07001910 dev->trans_start = jiffies; /* prevent tx timeout */
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00001911 dev->stats.tx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001912 netif_wake_queue(dev);
1913}
1914
1915static int alloc_ring(struct net_device *dev)
1916{
1917 struct netdev_private *np = netdev_priv(dev);
1918 np->rx_ring = pci_alloc_consistent(np->pci_dev,
1919 sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
1920 &np->ring_dma);
1921 if (!np->rx_ring)
1922 return -ENOMEM;
1923 np->tx_ring = &np->rx_ring[RX_RING_SIZE];
1924 return 0;
1925}
1926
1927static void refill_rx(struct net_device *dev)
1928{
1929 struct netdev_private *np = netdev_priv(dev);
1930
1931 /* Refill the Rx ring buffers. */
1932 for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
1933 struct sk_buff *skb;
1934 int entry = np->dirty_rx % RX_RING_SIZE;
1935 if (np->rx_skbuff[entry] == NULL) {
1936 unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING;
1937 skb = dev_alloc_skb(buflen);
1938 np->rx_skbuff[entry] = skb;
1939 if (skb == NULL)
1940 break; /* Better luck next round. */
1941 skb->dev = dev; /* Mark as being used by this device. */
1942 np->rx_dma[entry] = pci_map_single(np->pci_dev,
David S. Miller689be432005-06-28 15:25:31 -07001943 skb->data, buflen, PCI_DMA_FROMDEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001944 np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]);
1945 }
1946 np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz);
1947 }
1948 if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) {
1949 if (netif_msg_rx_err(np))
1950 printk(KERN_WARNING "%s: going OOM.\n", dev->name);
1951 np->oom = 1;
1952 }
1953}
1954
1955static void set_bufsize(struct net_device *dev)
1956{
1957 struct netdev_private *np = netdev_priv(dev);
1958 if (dev->mtu <= ETH_DATA_LEN)
1959 np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS;
1960 else
1961 np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS;
1962}
1963
1964/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1965static void init_ring(struct net_device *dev)
1966{
1967 struct netdev_private *np = netdev_priv(dev);
1968 int i;
1969
1970 /* 1) TX ring */
1971 np->dirty_tx = np->cur_tx = 0;
1972 for (i = 0; i < TX_RING_SIZE; i++) {
1973 np->tx_skbuff[i] = NULL;
1974 np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma
1975 +sizeof(struct netdev_desc)
1976 *((i+1)%TX_RING_SIZE+RX_RING_SIZE));
1977 np->tx_ring[i].cmd_status = 0;
1978 }
1979
1980 /* 2) RX ring */
1981 np->dirty_rx = 0;
1982 np->cur_rx = RX_RING_SIZE;
1983 np->oom = 0;
1984 set_bufsize(dev);
1985
1986 np->rx_head_desc = &np->rx_ring[0];
1987
Lucas De Marchi25985ed2011-03-30 22:57:33 -03001988 /* Please be careful before changing this loop - at least gcc-2.95.1
Linus Torvalds1da177e2005-04-16 15:20:36 -07001989 * miscompiles it otherwise.
1990 */
1991 /* Initialize all Rx descriptors. */
1992 for (i = 0; i < RX_RING_SIZE; i++) {
1993 np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma
1994 +sizeof(struct netdev_desc)
1995 *((i+1)%RX_RING_SIZE));
1996 np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
1997 np->rx_skbuff[i] = NULL;
1998 }
1999 refill_rx(dev);
2000 dump_ring(dev);
2001}
2002
2003static void drain_tx(struct net_device *dev)
2004{
2005 struct netdev_private *np = netdev_priv(dev);
2006 int i;
2007
2008 for (i = 0; i < TX_RING_SIZE; i++) {
2009 if (np->tx_skbuff[i]) {
2010 pci_unmap_single(np->pci_dev,
2011 np->tx_dma[i], np->tx_skbuff[i]->len,
2012 PCI_DMA_TODEVICE);
2013 dev_kfree_skb(np->tx_skbuff[i]);
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002014 dev->stats.tx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002015 }
2016 np->tx_skbuff[i] = NULL;
2017 }
2018}
2019
2020static void drain_rx(struct net_device *dev)
2021{
2022 struct netdev_private *np = netdev_priv(dev);
2023 unsigned int buflen = np->rx_buf_sz;
2024 int i;
2025
2026 /* Free all the skbuffs in the Rx queue. */
2027 for (i = 0; i < RX_RING_SIZE; i++) {
2028 np->rx_ring[i].cmd_status = 0;
Al Viroeca1ad82008-03-16 22:21:54 +00002029 np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002030 if (np->rx_skbuff[i]) {
2031 pci_unmap_single(np->pci_dev,
2032 np->rx_dma[i], buflen,
2033 PCI_DMA_FROMDEVICE);
2034 dev_kfree_skb(np->rx_skbuff[i]);
2035 }
2036 np->rx_skbuff[i] = NULL;
2037 }
2038}
2039
2040static void drain_ring(struct net_device *dev)
2041{
2042 drain_rx(dev);
2043 drain_tx(dev);
2044}
2045
2046static void free_ring(struct net_device *dev)
2047{
2048 struct netdev_private *np = netdev_priv(dev);
2049 pci_free_consistent(np->pci_dev,
2050 sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
2051 np->rx_ring, np->ring_dma);
2052}
2053
2054static void reinit_rx(struct net_device *dev)
2055{
2056 struct netdev_private *np = netdev_priv(dev);
2057 int i;
2058
2059 /* RX Ring */
2060 np->dirty_rx = 0;
2061 np->cur_rx = RX_RING_SIZE;
2062 np->rx_head_desc = &np->rx_ring[0];
2063 /* Initialize all Rx descriptors. */
2064 for (i = 0; i < RX_RING_SIZE; i++)
2065 np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
2066
2067 refill_rx(dev);
2068}
2069
2070static void reinit_ring(struct net_device *dev)
2071{
2072 struct netdev_private *np = netdev_priv(dev);
2073 int i;
2074
2075 /* drain TX ring */
2076 drain_tx(dev);
2077 np->dirty_tx = np->cur_tx = 0;
2078 for (i=0;i<TX_RING_SIZE;i++)
2079 np->tx_ring[i].cmd_status = 0;
2080
2081 reinit_rx(dev);
2082}
2083
Stephen Hemminger613573252009-08-31 19:50:58 +00002084static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002085{
2086 struct netdev_private *np = netdev_priv(dev);
2087 void __iomem * ioaddr = ns_ioaddr(dev);
2088 unsigned entry;
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002089 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002090
2091 /* Note: Ordering is important here, set the field with the
2092 "ownership" bit last, and only then increment cur_tx. */
2093
2094 /* Calculate the next Tx descriptor entry. */
2095 entry = np->cur_tx % TX_RING_SIZE;
2096
2097 np->tx_skbuff[entry] = skb;
2098 np->tx_dma[entry] = pci_map_single(np->pci_dev,
2099 skb->data,skb->len, PCI_DMA_TODEVICE);
2100
2101 np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]);
2102
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002103 spin_lock_irqsave(&np->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002104
2105 if (!np->hands_off) {
2106 np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len);
2107 /* StrongARM: Explicitly cache flush np->tx_ring and
2108 * skb->data,skb->len. */
2109 wmb();
2110 np->cur_tx++;
2111 if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) {
2112 netdev_tx_done(dev);
2113 if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1)
2114 netif_stop_queue(dev);
2115 }
2116 /* Wake the potentially-idle transmit channel. */
2117 writel(TxOn, ioaddr + ChipCmd);
2118 } else {
2119 dev_kfree_skb_irq(skb);
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002120 dev->stats.tx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002121 }
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002122 spin_unlock_irqrestore(&np->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002123
Linus Torvalds1da177e2005-04-16 15:20:36 -07002124 if (netif_msg_tx_queued(np)) {
2125 printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
2126 dev->name, np->cur_tx, entry);
2127 }
Patrick McHardy6ed10652009-06-23 06:03:08 +00002128 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002129}
2130
2131static void netdev_tx_done(struct net_device *dev)
2132{
2133 struct netdev_private *np = netdev_priv(dev);
2134
2135 for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
2136 int entry = np->dirty_tx % TX_RING_SIZE;
2137 if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn))
2138 break;
2139 if (netif_msg_tx_done(np))
2140 printk(KERN_DEBUG
2141 "%s: tx frame #%d finished, status %#08x.\n",
2142 dev->name, np->dirty_tx,
2143 le32_to_cpu(np->tx_ring[entry].cmd_status));
2144 if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) {
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002145 dev->stats.tx_packets++;
2146 dev->stats.tx_bytes += np->tx_skbuff[entry]->len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002147 } else { /* Various Tx errors */
2148 int tx_status =
2149 le32_to_cpu(np->tx_ring[entry].cmd_status);
2150 if (tx_status & (DescTxAbort|DescTxExcColl))
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002151 dev->stats.tx_aborted_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002152 if (tx_status & DescTxFIFO)
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002153 dev->stats.tx_fifo_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002154 if (tx_status & DescTxCarrier)
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002155 dev->stats.tx_carrier_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002156 if (tx_status & DescTxOOWCol)
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002157 dev->stats.tx_window_errors++;
2158 dev->stats.tx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002159 }
2160 pci_unmap_single(np->pci_dev,np->tx_dma[entry],
2161 np->tx_skbuff[entry]->len,
2162 PCI_DMA_TODEVICE);
2163 /* Free the original skb. */
2164 dev_kfree_skb_irq(np->tx_skbuff[entry]);
2165 np->tx_skbuff[entry] = NULL;
2166 }
Joe Perches8e95a202009-12-03 07:58:21 +00002167 if (netif_queue_stopped(dev) &&
2168 np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002169 /* The ring is no longer full, wake queue. */
2170 netif_wake_queue(dev);
2171 }
2172}
2173
Mark Brownb27a16b2006-02-02 00:00:01 +00002174/* The interrupt handler doesn't actually handle interrupts itself, it
2175 * schedules a NAPI poll if there is anything to do. */
David Howells7d12e782006-10-05 14:55:46 +01002176static irqreturn_t intr_handler(int irq, void *dev_instance)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002177{
2178 struct net_device *dev = dev_instance;
2179 struct netdev_private *np = netdev_priv(dev);
2180 void __iomem * ioaddr = ns_ioaddr(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002181
broonie@sirena.org.uk069f8252007-03-14 19:49:14 +00002182 /* Reading IntrStatus automatically acknowledges so don't do
2183 * that while interrupts are disabled, (for example, while a
2184 * poll is scheduled). */
2185 if (np->hands_off || !readl(ioaddr + IntrEnable))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002186 return IRQ_NONE;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002187
Mark Brownb27a16b2006-02-02 00:00:01 +00002188 np->intr_status = readl(ioaddr + IntrStatus);
2189
broonie@sirena.org.uk069f8252007-03-14 19:49:14 +00002190 if (!np->intr_status)
2191 return IRQ_NONE;
2192
Mark Brownb27a16b2006-02-02 00:00:01 +00002193 if (netif_msg_intr(np))
2194 printk(KERN_DEBUG
2195 "%s: Interrupt, status %#08x, mask %#08x.\n",
2196 dev->name, np->intr_status,
2197 readl(ioaddr + IntrMask));
2198
Mark Brownb27a16b2006-02-02 00:00:01 +00002199 prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
2200
Ben Hutchings288379f2009-01-19 16:43:59 -08002201 if (napi_schedule_prep(&np->napi)) {
Mark Brownb27a16b2006-02-02 00:00:01 +00002202 /* Disable interrupts and register for poll */
2203 natsemi_irq_disable(dev);
Ben Hutchings288379f2009-01-19 16:43:59 -08002204 __napi_schedule(&np->napi);
broonie@sirena.org.uk069f8252007-03-14 19:49:14 +00002205 } else
2206 printk(KERN_WARNING
2207 "%s: Ignoring interrupt, status %#08x, mask %#08x.\n",
2208 dev->name, np->intr_status,
2209 readl(ioaddr + IntrMask));
2210
Mark Brownb27a16b2006-02-02 00:00:01 +00002211 return IRQ_HANDLED;
2212}
2213
2214/* This is the NAPI poll routine. As well as the standard RX handling
2215 * it also handles all other interrupts that the chip might raise.
2216 */
Stephen Hemmingerbea33482007-10-03 16:41:36 -07002217static int natsemi_poll(struct napi_struct *napi, int budget)
Mark Brownb27a16b2006-02-02 00:00:01 +00002218{
Stephen Hemmingerbea33482007-10-03 16:41:36 -07002219 struct netdev_private *np = container_of(napi, struct netdev_private, napi);
2220 struct net_device *dev = np->dev;
Mark Brownb27a16b2006-02-02 00:00:01 +00002221 void __iomem * ioaddr = ns_ioaddr(dev);
Mark Brownb27a16b2006-02-02 00:00:01 +00002222 int work_done = 0;
2223
Linus Torvalds1da177e2005-04-16 15:20:36 -07002224 do {
broonie@sirena.org.uk069f8252007-03-14 19:49:14 +00002225 if (netif_msg_intr(np))
2226 printk(KERN_DEBUG
2227 "%s: Poll, status %#08x, mask %#08x.\n",
2228 dev->name, np->intr_status,
2229 readl(ioaddr + IntrMask));
2230
broonie@sirena.org.ukd2a90032007-03-14 19:49:15 +00002231 /* netdev_rx() may read IntrStatus again if the RX state
2232 * machine falls over so do it first. */
2233 if (np->intr_status &
2234 (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
2235 IntrRxErr | IntrRxOverrun)) {
Stephen Hemmingerbea33482007-10-03 16:41:36 -07002236 netdev_rx(dev, &work_done, budget);
broonie@sirena.org.ukd2a90032007-03-14 19:49:15 +00002237 }
2238
Mark Brownb27a16b2006-02-02 00:00:01 +00002239 if (np->intr_status &
2240 (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002241 spin_lock(&np->lock);
2242 netdev_tx_done(dev);
2243 spin_unlock(&np->lock);
2244 }
2245
2246 /* Abnormal error summary/uncommon events handlers. */
Mark Brownb27a16b2006-02-02 00:00:01 +00002247 if (np->intr_status & IntrAbnormalSummary)
2248 netdev_error(dev, np->intr_status);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002249
Stephen Hemmingerbea33482007-10-03 16:41:36 -07002250 if (work_done >= budget)
2251 return work_done;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002252
Mark Brownb27a16b2006-02-02 00:00:01 +00002253 np->intr_status = readl(ioaddr + IntrStatus);
2254 } while (np->intr_status);
2255
Ben Hutchings288379f2009-01-19 16:43:59 -08002256 napi_complete(napi);
Mark Brownb27a16b2006-02-02 00:00:01 +00002257
2258 /* Reenable interrupts providing nothing is trying to shut
2259 * the chip down. */
2260 spin_lock(&np->lock);
David S. Miller4ec24112008-01-07 20:48:21 -08002261 if (!np->hands_off)
Mark Brownb27a16b2006-02-02 00:00:01 +00002262 natsemi_irq_enable(dev);
2263 spin_unlock(&np->lock);
2264
Stephen Hemmingerbea33482007-10-03 16:41:36 -07002265 return work_done;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002266}
2267
2268/* This routine is logically part of the interrupt handler, but separated
2269 for clarity and better register allocation. */
Mark Brownb27a16b2006-02-02 00:00:01 +00002270static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002271{
2272 struct netdev_private *np = netdev_priv(dev);
2273 int entry = np->cur_rx % RX_RING_SIZE;
2274 int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
2275 s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
2276 unsigned int buflen = np->rx_buf_sz;
2277 void __iomem * ioaddr = ns_ioaddr(dev);
2278
2279 /* If the driver owns the next entry it's a new packet. Send it up. */
2280 while (desc_status < 0) { /* e.g. & DescOwn */
2281 int pkt_len;
2282 if (netif_msg_rx_status(np))
2283 printk(KERN_DEBUG
2284 " netdev_rx() entry %d status was %#08x.\n",
2285 entry, desc_status);
2286 if (--boguscnt < 0)
2287 break;
Mark Brownb27a16b2006-02-02 00:00:01 +00002288
2289 if (*work_done >= work_to_do)
2290 break;
2291
2292 (*work_done)++;
2293
Linus Torvalds1da177e2005-04-16 15:20:36 -07002294 pkt_len = (desc_status & DescSizeMask) - 4;
2295 if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
2296 if (desc_status & DescMore) {
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002297 unsigned long flags;
2298
Linus Torvalds1da177e2005-04-16 15:20:36 -07002299 if (netif_msg_rx_err(np))
2300 printk(KERN_WARNING
2301 "%s: Oversized(?) Ethernet "
2302 "frame spanned multiple "
2303 "buffers, entry %#08x "
2304 "status %#08x.\n", dev->name,
2305 np->cur_rx, desc_status);
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002306 dev->stats.rx_length_errors++;
Mark Browne72fd962006-02-02 00:00:02 +00002307
2308 /* The RX state machine has probably
2309 * locked up beneath us. Follow the
2310 * reset procedure documented in
2311 * AN-1287. */
2312
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002313 spin_lock_irqsave(&np->lock, flags);
Mark Browne72fd962006-02-02 00:00:02 +00002314 reset_rx(dev);
2315 reinit_rx(dev);
2316 writel(np->ring_dma, ioaddr + RxRingPtr);
2317 check_link(dev);
Sergei Shtylyov6006f7f2007-03-06 00:10:08 +04002318 spin_unlock_irqrestore(&np->lock, flags);
Mark Browne72fd962006-02-02 00:00:02 +00002319
2320 /* We'll enable RX on exit from this
2321 * function. */
2322 break;
2323
Linus Torvalds1da177e2005-04-16 15:20:36 -07002324 } else {
2325 /* There was an error. */
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002326 dev->stats.rx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002327 if (desc_status & (DescRxAbort|DescRxOver))
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002328 dev->stats.rx_over_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002329 if (desc_status & (DescRxLong|DescRxRunt))
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002330 dev->stats.rx_length_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002331 if (desc_status & (DescRxInvalid|DescRxAlign))
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002332 dev->stats.rx_frame_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002333 if (desc_status & DescRxCRC)
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002334 dev->stats.rx_crc_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002335 }
2336 } else if (pkt_len > np->rx_buf_sz) {
2337 /* if this is the tail of a double buffer
2338 * packet, we've already counted the error
2339 * on the first part. Ignore the second half.
2340 */
2341 } else {
2342 struct sk_buff *skb;
2343 /* Omit CRC size. */
2344 /* Check if the packet is long enough to accept
2345 * without copying to a minimally-sized skbuff. */
Joe Perches8e95a202009-12-03 07:58:21 +00002346 if (pkt_len < rx_copybreak &&
2347 (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002348 /* 16 byte align the IP header */
2349 skb_reserve(skb, RX_OFFSET);
2350 pci_dma_sync_single_for_cpu(np->pci_dev,
2351 np->rx_dma[entry],
2352 buflen,
2353 PCI_DMA_FROMDEVICE);
David S. Miller8c7b7fa2007-07-10 22:08:12 -07002354 skb_copy_to_linear_data(skb,
2355 np->rx_skbuff[entry]->data, pkt_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002356 skb_put(skb, pkt_len);
2357 pci_dma_sync_single_for_device(np->pci_dev,
2358 np->rx_dma[entry],
2359 buflen,
2360 PCI_DMA_FROMDEVICE);
2361 } else {
2362 pci_unmap_single(np->pci_dev, np->rx_dma[entry],
2363 buflen, PCI_DMA_FROMDEVICE);
2364 skb_put(skb = np->rx_skbuff[entry], pkt_len);
2365 np->rx_skbuff[entry] = NULL;
2366 }
2367 skb->protocol = eth_type_trans(skb, dev);
Mark Brownb27a16b2006-02-02 00:00:01 +00002368 netif_receive_skb(skb);
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002369 dev->stats.rx_packets++;
2370 dev->stats.rx_bytes += pkt_len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002371 }
2372 entry = (++np->cur_rx) % RX_RING_SIZE;
2373 np->rx_head_desc = &np->rx_ring[entry];
2374 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
2375 }
2376 refill_rx(dev);
2377
2378 /* Restart Rx engine if stopped. */
2379 if (np->oom)
2380 mod_timer(&np->timer, jiffies + 1);
2381 else
2382 writel(RxOn, ioaddr + ChipCmd);
2383}
2384
2385static void netdev_error(struct net_device *dev, int intr_status)
2386{
2387 struct netdev_private *np = netdev_priv(dev);
2388 void __iomem * ioaddr = ns_ioaddr(dev);
2389
2390 spin_lock(&np->lock);
2391 if (intr_status & LinkChange) {
2392 u16 lpa = mdio_read(dev, MII_LPA);
Joe Perches8e95a202009-12-03 07:58:21 +00002393 if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE &&
2394 netif_msg_link(np)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002395 printk(KERN_INFO
2396 "%s: Autonegotiation advertising"
2397 " %#04x partner %#04x.\n", dev->name,
2398 np->advertising, lpa);
2399 }
2400
2401 /* read MII int status to clear the flag */
2402 readw(ioaddr + MIntrStatus);
2403 check_link(dev);
2404 }
2405 if (intr_status & StatsMax) {
2406 __get_stats(dev);
2407 }
2408 if (intr_status & IntrTxUnderrun) {
2409 if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) {
2410 np->tx_config += TX_DRTH_VAL_INC;
2411 if (netif_msg_tx_err(np))
2412 printk(KERN_NOTICE
2413 "%s: increased tx threshold, txcfg %#08x.\n",
2414 dev->name, np->tx_config);
2415 } else {
2416 if (netif_msg_tx_err(np))
2417 printk(KERN_NOTICE
2418 "%s: tx underrun with maximum tx threshold, txcfg %#08x.\n",
2419 dev->name, np->tx_config);
2420 }
2421 writel(np->tx_config, ioaddr + TxConfig);
2422 }
2423 if (intr_status & WOLPkt && netif_msg_wol(np)) {
2424 int wol_status = readl(ioaddr + WOLCmd);
2425 printk(KERN_NOTICE "%s: Link wake-up event %#08x\n",
2426 dev->name, wol_status);
2427 }
2428 if (intr_status & RxStatusFIFOOver) {
2429 if (netif_msg_rx_err(np) && netif_msg_intr(np)) {
2430 printk(KERN_NOTICE "%s: Rx status FIFO overrun\n",
2431 dev->name);
2432 }
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002433 dev->stats.rx_fifo_errors++;
2434 dev->stats.rx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002435 }
2436 /* Hmmmmm, it's not clear how to recover from PCI faults. */
2437 if (intr_status & IntrPCIErr) {
2438 printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
2439 intr_status & IntrPCIErr);
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002440 dev->stats.tx_fifo_errors++;
2441 dev->stats.tx_errors++;
2442 dev->stats.rx_fifo_errors++;
2443 dev->stats.rx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002444 }
2445 spin_unlock(&np->lock);
2446}
2447
2448static void __get_stats(struct net_device *dev)
2449{
2450 void __iomem * ioaddr = ns_ioaddr(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002451
2452 /* The chip only need report frame silently dropped. */
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002453 dev->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs);
2454 dev->stats.rx_missed_errors += readl(ioaddr + RxMissed);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002455}
2456
2457static struct net_device_stats *get_stats(struct net_device *dev)
2458{
2459 struct netdev_private *np = netdev_priv(dev);
2460
2461 /* The chip only need report frame silently dropped. */
2462 spin_lock_irq(&np->lock);
2463 if (netif_running(dev) && !np->hands_off)
2464 __get_stats(dev);
2465 spin_unlock_irq(&np->lock);
2466
Kulikov Vasiliy2321e802010-07-05 02:14:17 +00002467 return &dev->stats;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002468}
2469
2470#ifdef CONFIG_NET_POLL_CONTROLLER
2471static void natsemi_poll_controller(struct net_device *dev)
2472{
2473 disable_irq(dev->irq);
broonie@sirena.org.uk069f8252007-03-14 19:49:14 +00002474 intr_handler(dev->irq, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002475 enable_irq(dev->irq);
2476}
2477#endif
2478
2479#define HASH_TABLE 0x200
2480static void __set_rx_mode(struct net_device *dev)
2481{
2482 void __iomem * ioaddr = ns_ioaddr(dev);
2483 struct netdev_private *np = netdev_priv(dev);
2484 u8 mc_filter[64]; /* Multicast hash filter */
2485 u32 rx_mode;
2486
2487 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002488 rx_mode = RxFilterEnable | AcceptBroadcast
2489 | AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys;
Jiri Pirko4cd24ea2010-02-08 04:30:35 +00002490 } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
Joe Perches8e95a202009-12-03 07:58:21 +00002491 (dev->flags & IFF_ALLMULTI)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002492 rx_mode = RxFilterEnable | AcceptBroadcast
2493 | AcceptAllMulticast | AcceptMyPhys;
2494 } else {
Jiri Pirko22bedad32010-04-01 21:22:57 +00002495 struct netdev_hw_addr *ha;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002496 int i;
Jiri Pirkof9dcbcc2010-02-23 09:19:49 +00002497
Linus Torvalds1da177e2005-04-16 15:20:36 -07002498 memset(mc_filter, 0, sizeof(mc_filter));
Jiri Pirko22bedad32010-04-01 21:22:57 +00002499 netdev_for_each_mc_addr(ha, dev) {
2500 int b = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x1ff;
Stephen Hemmingerddfce6b2007-10-05 17:19:47 -07002501 mc_filter[b/8] |= (1 << (b & 0x07));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002502 }
2503 rx_mode = RxFilterEnable | AcceptBroadcast
2504 | AcceptMulticast | AcceptMyPhys;
2505 for (i = 0; i < 64; i += 2) {
Herbert Xu760f86d2005-04-16 16:24:16 +10002506 writel(HASH_TABLE + i, ioaddr + RxFilterAddr);
2507 writel((mc_filter[i + 1] << 8) + mc_filter[i],
2508 ioaddr + RxFilterData);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002509 }
2510 }
2511 writel(rx_mode, ioaddr + RxFilterAddr);
2512 np->cur_rx_mode = rx_mode;
2513}
2514
2515static int natsemi_change_mtu(struct net_device *dev, int new_mtu)
2516{
2517 if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS)
2518 return -EINVAL;
2519
2520 dev->mtu = new_mtu;
2521
2522 /* synchronized against open : rtnl_lock() held by caller */
2523 if (netif_running(dev)) {
2524 struct netdev_private *np = netdev_priv(dev);
2525 void __iomem * ioaddr = ns_ioaddr(dev);
2526
2527 disable_irq(dev->irq);
2528 spin_lock(&np->lock);
2529 /* stop engines */
2530 natsemi_stop_rxtx(dev);
2531 /* drain rx queue */
2532 drain_rx(dev);
2533 /* change buffers */
2534 set_bufsize(dev);
2535 reinit_rx(dev);
2536 writel(np->ring_dma, ioaddr + RxRingPtr);
2537 /* restart engines */
2538 writel(RxOn | TxOn, ioaddr + ChipCmd);
2539 spin_unlock(&np->lock);
2540 enable_irq(dev->irq);
2541 }
2542 return 0;
2543}
2544
2545static void set_rx_mode(struct net_device *dev)
2546{
2547 struct netdev_private *np = netdev_priv(dev);
2548 spin_lock_irq(&np->lock);
2549 if (!np->hands_off)
2550 __set_rx_mode(dev);
2551 spin_unlock_irq(&np->lock);
2552}
2553
2554static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2555{
2556 struct netdev_private *np = netdev_priv(dev);
2557 strncpy(info->driver, DRV_NAME, ETHTOOL_BUSINFO_LEN);
2558 strncpy(info->version, DRV_VERSION, ETHTOOL_BUSINFO_LEN);
2559 strncpy(info->bus_info, pci_name(np->pci_dev), ETHTOOL_BUSINFO_LEN);
2560}
2561
2562static int get_regs_len(struct net_device *dev)
2563{
2564 return NATSEMI_REGS_SIZE;
2565}
2566
2567static int get_eeprom_len(struct net_device *dev)
2568{
Mark Browna8b4cf42006-03-28 14:08:55 -08002569 struct netdev_private *np = netdev_priv(dev);
2570 return np->eeprom_size;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002571}
2572
2573static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2574{
2575 struct netdev_private *np = netdev_priv(dev);
2576 spin_lock_irq(&np->lock);
2577 netdev_get_ecmd(dev, ecmd);
2578 spin_unlock_irq(&np->lock);
2579 return 0;
2580}
2581
2582static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2583{
2584 struct netdev_private *np = netdev_priv(dev);
2585 int res;
2586 spin_lock_irq(&np->lock);
2587 res = netdev_set_ecmd(dev, ecmd);
2588 spin_unlock_irq(&np->lock);
2589 return res;
2590}
2591
2592static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2593{
2594 struct netdev_private *np = netdev_priv(dev);
2595 spin_lock_irq(&np->lock);
2596 netdev_get_wol(dev, &wol->supported, &wol->wolopts);
2597 netdev_get_sopass(dev, wol->sopass);
2598 spin_unlock_irq(&np->lock);
2599}
2600
2601static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2602{
2603 struct netdev_private *np = netdev_priv(dev);
2604 int res;
2605 spin_lock_irq(&np->lock);
2606 netdev_set_wol(dev, wol->wolopts);
2607 res = netdev_set_sopass(dev, wol->sopass);
2608 spin_unlock_irq(&np->lock);
2609 return res;
2610}
2611
2612static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
2613{
2614 struct netdev_private *np = netdev_priv(dev);
2615 regs->version = NATSEMI_REGS_VER;
2616 spin_lock_irq(&np->lock);
2617 netdev_get_regs(dev, buf);
2618 spin_unlock_irq(&np->lock);
2619}
2620
2621static u32 get_msglevel(struct net_device *dev)
2622{
2623 struct netdev_private *np = netdev_priv(dev);
2624 return np->msg_enable;
2625}
2626
2627static void set_msglevel(struct net_device *dev, u32 val)
2628{
2629 struct netdev_private *np = netdev_priv(dev);
2630 np->msg_enable = val;
2631}
2632
2633static int nway_reset(struct net_device *dev)
2634{
2635 int tmp;
2636 int r = -EINVAL;
2637 /* if autoneg is off, it's an error */
2638 tmp = mdio_read(dev, MII_BMCR);
2639 if (tmp & BMCR_ANENABLE) {
2640 tmp |= (BMCR_ANRESTART);
2641 mdio_write(dev, MII_BMCR, tmp);
2642 r = 0;
2643 }
2644 return r;
2645}
2646
2647static u32 get_link(struct net_device *dev)
2648{
2649 /* LSTATUS is latched low until a read - so read twice */
2650 mdio_read(dev, MII_BMSR);
2651 return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
2652}
2653
2654static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
2655{
2656 struct netdev_private *np = netdev_priv(dev);
Mark Browna8b4cf42006-03-28 14:08:55 -08002657 u8 *eebuf;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002658 int res;
2659
Mark Browna8b4cf42006-03-28 14:08:55 -08002660 eebuf = kmalloc(np->eeprom_size, GFP_KERNEL);
2661 if (!eebuf)
2662 return -ENOMEM;
2663
Linus Torvalds1da177e2005-04-16 15:20:36 -07002664 eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
2665 spin_lock_irq(&np->lock);
2666 res = netdev_get_eeprom(dev, eebuf);
2667 spin_unlock_irq(&np->lock);
2668 if (!res)
2669 memcpy(data, eebuf+eeprom->offset, eeprom->len);
Mark Browna8b4cf42006-03-28 14:08:55 -08002670 kfree(eebuf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002671 return res;
2672}
2673
Jeff Garzik7282d492006-09-13 14:30:00 -04002674static const struct ethtool_ops ethtool_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002675 .get_drvinfo = get_drvinfo,
2676 .get_regs_len = get_regs_len,
2677 .get_eeprom_len = get_eeprom_len,
2678 .get_settings = get_settings,
2679 .set_settings = set_settings,
2680 .get_wol = get_wol,
2681 .set_wol = set_wol,
2682 .get_regs = get_regs,
2683 .get_msglevel = get_msglevel,
2684 .set_msglevel = set_msglevel,
2685 .nway_reset = nway_reset,
2686 .get_link = get_link,
2687 .get_eeprom = get_eeprom,
2688};
2689
2690static int netdev_set_wol(struct net_device *dev, u32 newval)
2691{
2692 struct netdev_private *np = netdev_priv(dev);
2693 void __iomem * ioaddr = ns_ioaddr(dev);
2694 u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary;
2695
2696 /* translate to bitmasks this chip understands */
2697 if (newval & WAKE_PHY)
2698 data |= WakePhy;
2699 if (newval & WAKE_UCAST)
2700 data |= WakeUnicast;
2701 if (newval & WAKE_MCAST)
2702 data |= WakeMulticast;
2703 if (newval & WAKE_BCAST)
2704 data |= WakeBroadcast;
2705 if (newval & WAKE_ARP)
2706 data |= WakeArp;
2707 if (newval & WAKE_MAGIC)
2708 data |= WakeMagic;
2709 if (np->srr >= SRR_DP83815_D) {
2710 if (newval & WAKE_MAGICSECURE) {
2711 data |= WakeMagicSecure;
2712 }
2713 }
2714
2715 writel(data, ioaddr + WOLCmd);
2716
2717 return 0;
2718}
2719
2720static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur)
2721{
2722 struct netdev_private *np = netdev_priv(dev);
2723 void __iomem * ioaddr = ns_ioaddr(dev);
2724 u32 regval = readl(ioaddr + WOLCmd);
2725
2726 *supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST
2727 | WAKE_ARP | WAKE_MAGIC);
2728
2729 if (np->srr >= SRR_DP83815_D) {
2730 /* SOPASS works on revD and higher */
2731 *supported |= WAKE_MAGICSECURE;
2732 }
2733 *cur = 0;
2734
2735 /* translate from chip bitmasks */
2736 if (regval & WakePhy)
2737 *cur |= WAKE_PHY;
2738 if (regval & WakeUnicast)
2739 *cur |= WAKE_UCAST;
2740 if (regval & WakeMulticast)
2741 *cur |= WAKE_MCAST;
2742 if (regval & WakeBroadcast)
2743 *cur |= WAKE_BCAST;
2744 if (regval & WakeArp)
2745 *cur |= WAKE_ARP;
2746 if (regval & WakeMagic)
2747 *cur |= WAKE_MAGIC;
2748 if (regval & WakeMagicSecure) {
2749 /* this can be on in revC, but it's broken */
2750 *cur |= WAKE_MAGICSECURE;
2751 }
2752
2753 return 0;
2754}
2755
2756static int netdev_set_sopass(struct net_device *dev, u8 *newval)
2757{
2758 struct netdev_private *np = netdev_priv(dev);
2759 void __iomem * ioaddr = ns_ioaddr(dev);
2760 u16 *sval = (u16 *)newval;
2761 u32 addr;
2762
2763 if (np->srr < SRR_DP83815_D) {
2764 return 0;
2765 }
2766
2767 /* enable writing to these registers by disabling the RX filter */
2768 addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
2769 addr &= ~RxFilterEnable;
2770 writel(addr, ioaddr + RxFilterAddr);
2771
2772 /* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */
2773 writel(addr | 0xa, ioaddr + RxFilterAddr);
2774 writew(sval[0], ioaddr + RxFilterData);
2775
2776 writel(addr | 0xc, ioaddr + RxFilterAddr);
2777 writew(sval[1], ioaddr + RxFilterData);
2778
2779 writel(addr | 0xe, ioaddr + RxFilterAddr);
2780 writew(sval[2], ioaddr + RxFilterData);
2781
2782 /* re-enable the RX filter */
2783 writel(addr | RxFilterEnable, ioaddr + RxFilterAddr);
2784
2785 return 0;
2786}
2787
2788static int netdev_get_sopass(struct net_device *dev, u8 *data)
2789{
2790 struct netdev_private *np = netdev_priv(dev);
2791 void __iomem * ioaddr = ns_ioaddr(dev);
2792 u16 *sval = (u16 *)data;
2793 u32 addr;
2794
2795 if (np->srr < SRR_DP83815_D) {
2796 sval[0] = sval[1] = sval[2] = 0;
2797 return 0;
2798 }
2799
2800 /* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */
2801 addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
2802
2803 writel(addr | 0xa, ioaddr + RxFilterAddr);
2804 sval[0] = readw(ioaddr + RxFilterData);
2805
2806 writel(addr | 0xc, ioaddr + RxFilterAddr);
2807 sval[1] = readw(ioaddr + RxFilterData);
2808
2809 writel(addr | 0xe, ioaddr + RxFilterAddr);
2810 sval[2] = readw(ioaddr + RxFilterData);
2811
2812 writel(addr, ioaddr + RxFilterAddr);
2813
2814 return 0;
2815}
2816
2817static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
2818{
2819 struct netdev_private *np = netdev_priv(dev);
2820 u32 tmp;
2821
2822 ecmd->port = dev->if_port;
2823 ecmd->speed = np->speed;
2824 ecmd->duplex = np->duplex;
2825 ecmd->autoneg = np->autoneg;
2826 ecmd->advertising = 0;
2827 if (np->advertising & ADVERTISE_10HALF)
2828 ecmd->advertising |= ADVERTISED_10baseT_Half;
2829 if (np->advertising & ADVERTISE_10FULL)
2830 ecmd->advertising |= ADVERTISED_10baseT_Full;
2831 if (np->advertising & ADVERTISE_100HALF)
2832 ecmd->advertising |= ADVERTISED_100baseT_Half;
2833 if (np->advertising & ADVERTISE_100FULL)
2834 ecmd->advertising |= ADVERTISED_100baseT_Full;
2835 ecmd->supported = (SUPPORTED_Autoneg |
2836 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
2837 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
2838 SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE);
2839 ecmd->phy_address = np->phy_addr_external;
2840 /*
2841 * We intentionally report the phy address of the external
2842 * phy, even if the internal phy is used. This is necessary
2843 * to work around a deficiency of the ethtool interface:
2844 * It's only possible to query the settings of the active
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002845 * port. Therefore
Linus Torvalds1da177e2005-04-16 15:20:36 -07002846 * # ethtool -s ethX port mii
2847 * actually sends an ioctl to switch to port mii with the
2848 * settings that are used for the current active port.
2849 * If we would report a different phy address in this
2850 * command, then
2851 * # ethtool -s ethX port tp;ethtool -s ethX port mii
2852 * would unintentionally change the phy address.
2853 *
2854 * Fortunately the phy address doesn't matter with the
2855 * internal phy...
2856 */
2857
2858 /* set information based on active port type */
2859 switch (ecmd->port) {
2860 default:
2861 case PORT_TP:
2862 ecmd->advertising |= ADVERTISED_TP;
2863 ecmd->transceiver = XCVR_INTERNAL;
2864 break;
2865 case PORT_MII:
2866 ecmd->advertising |= ADVERTISED_MII;
2867 ecmd->transceiver = XCVR_EXTERNAL;
2868 break;
2869 case PORT_FIBRE:
2870 ecmd->advertising |= ADVERTISED_FIBRE;
2871 ecmd->transceiver = XCVR_EXTERNAL;
2872 break;
2873 }
2874
2875 /* if autonegotiation is on, try to return the active speed/duplex */
2876 if (ecmd->autoneg == AUTONEG_ENABLE) {
2877 ecmd->advertising |= ADVERTISED_Autoneg;
2878 tmp = mii_nway_result(
2879 np->advertising & mdio_read(dev, MII_LPA));
2880 if (tmp == LPA_100FULL || tmp == LPA_100HALF)
2881 ecmd->speed = SPEED_100;
2882 else
2883 ecmd->speed = SPEED_10;
2884 if (tmp == LPA_100FULL || tmp == LPA_10FULL)
2885 ecmd->duplex = DUPLEX_FULL;
2886 else
2887 ecmd->duplex = DUPLEX_HALF;
2888 }
2889
2890 /* ignore maxtxpkt, maxrxpkt for now */
2891
2892 return 0;
2893}
2894
2895static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
2896{
2897 struct netdev_private *np = netdev_priv(dev);
2898
2899 if (ecmd->port != PORT_TP && ecmd->port != PORT_MII && ecmd->port != PORT_FIBRE)
2900 return -EINVAL;
2901 if (ecmd->transceiver != XCVR_INTERNAL && ecmd->transceiver != XCVR_EXTERNAL)
2902 return -EINVAL;
2903 if (ecmd->autoneg == AUTONEG_ENABLE) {
2904 if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
2905 ADVERTISED_10baseT_Full |
2906 ADVERTISED_100baseT_Half |
2907 ADVERTISED_100baseT_Full)) == 0) {
2908 return -EINVAL;
2909 }
2910 } else if (ecmd->autoneg == AUTONEG_DISABLE) {
2911 if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
2912 return -EINVAL;
2913 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
2914 return -EINVAL;
2915 } else {
2916 return -EINVAL;
2917 }
2918
2919 /*
Mark Brown68c90162007-02-19 20:15:39 +00002920 * If we're ignoring the PHY then autoneg and the internal
2921 * transciever are really not going to work so don't let the
2922 * user select them.
2923 */
2924 if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||
2925 ecmd->port == PORT_TP))
2926 return -EINVAL;
2927
2928 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002929 * maxtxpkt, maxrxpkt: ignored for now.
2930 *
2931 * transceiver:
2932 * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always
2933 * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and
2934 * selects based on ecmd->port.
2935 *
2936 * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre
2937 * phys that are connected to the mii bus. It's used to apply fibre
2938 * specific updates.
2939 */
2940
2941 /* WHEW! now lets bang some bits */
2942
2943 /* save the parms */
2944 dev->if_port = ecmd->port;
2945 np->autoneg = ecmd->autoneg;
2946 np->phy_addr_external = ecmd->phy_address & PhyAddrMask;
2947 if (np->autoneg == AUTONEG_ENABLE) {
2948 /* advertise only what has been requested */
2949 np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
2950 if (ecmd->advertising & ADVERTISED_10baseT_Half)
2951 np->advertising |= ADVERTISE_10HALF;
2952 if (ecmd->advertising & ADVERTISED_10baseT_Full)
2953 np->advertising |= ADVERTISE_10FULL;
2954 if (ecmd->advertising & ADVERTISED_100baseT_Half)
2955 np->advertising |= ADVERTISE_100HALF;
2956 if (ecmd->advertising & ADVERTISED_100baseT_Full)
2957 np->advertising |= ADVERTISE_100FULL;
2958 } else {
2959 np->speed = ecmd->speed;
2960 np->duplex = ecmd->duplex;
2961 /* user overriding the initial full duplex parm? */
2962 if (np->duplex == DUPLEX_HALF)
2963 np->full_duplex = 0;
2964 }
2965
2966 /* get the right phy enabled */
2967 if (ecmd->port == PORT_TP)
2968 switch_port_internal(dev);
2969 else
2970 switch_port_external(dev);
2971
2972 /* set parms and see how this affected our link status */
2973 init_phy_fixup(dev);
2974 check_link(dev);
2975 return 0;
2976}
2977
2978static int netdev_get_regs(struct net_device *dev, u8 *buf)
2979{
2980 int i;
2981 int j;
2982 u32 rfcr;
2983 u32 *rbuf = (u32 *)buf;
2984 void __iomem * ioaddr = ns_ioaddr(dev);
2985
2986 /* read non-mii page 0 of registers */
2987 for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) {
2988 rbuf[i] = readl(ioaddr + i*4);
2989 }
2990
2991 /* read current mii registers */
2992 for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++)
2993 rbuf[i] = mdio_read(dev, i & 0x1f);
2994
2995 /* read only the 'magic' registers from page 1 */
2996 writew(1, ioaddr + PGSEL);
2997 rbuf[i++] = readw(ioaddr + PMDCSR);
2998 rbuf[i++] = readw(ioaddr + TSTDAT);
2999 rbuf[i++] = readw(ioaddr + DSPCFG);
3000 rbuf[i++] = readw(ioaddr + SDCFG);
3001 writew(0, ioaddr + PGSEL);
3002
3003 /* read RFCR indexed registers */
3004 rfcr = readl(ioaddr + RxFilterAddr);
3005 for (j = 0; j < NATSEMI_RFDR_NREGS; j++) {
3006 writel(j*2, ioaddr + RxFilterAddr);
3007 rbuf[i++] = readw(ioaddr + RxFilterData);
3008 }
3009 writel(rfcr, ioaddr + RxFilterAddr);
3010
3011 /* the interrupt status is clear-on-read - see if we missed any */
3012 if (rbuf[4] & rbuf[5]) {
3013 printk(KERN_WARNING
3014 "%s: shoot, we dropped an interrupt (%#08x)\n",
3015 dev->name, rbuf[4] & rbuf[5]);
3016 }
3017
3018 return 0;
3019}
3020
3021#define SWAP_BITS(x) ( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \
3022 | (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9) \
3023 | (((x) & 0x0010) << 7) | (((x) & 0x0020) << 5) \
3024 | (((x) & 0x0040) << 3) | (((x) & 0x0080) << 1) \
3025 | (((x) & 0x0100) >> 1) | (((x) & 0x0200) >> 3) \
3026 | (((x) & 0x0400) >> 5) | (((x) & 0x0800) >> 7) \
3027 | (((x) & 0x1000) >> 9) | (((x) & 0x2000) >> 11) \
3028 | (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) )
3029
3030static int netdev_get_eeprom(struct net_device *dev, u8 *buf)
3031{
3032 int i;
3033 u16 *ebuf = (u16 *)buf;
3034 void __iomem * ioaddr = ns_ioaddr(dev);
Mark Browna8b4cf42006-03-28 14:08:55 -08003035 struct netdev_private *np = netdev_priv(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003036
3037 /* eeprom_read reads 16 bits, and indexes by 16 bits */
Mark Browna8b4cf42006-03-28 14:08:55 -08003038 for (i = 0; i < np->eeprom_size/2; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003039 ebuf[i] = eeprom_read(ioaddr, i);
3040 /* The EEPROM itself stores data bit-swapped, but eeprom_read
3041 * reads it back "sanely". So we swap it back here in order to
3042 * present it to userland as it is stored. */
3043 ebuf[i] = SWAP_BITS(ebuf[i]);
3044 }
3045 return 0;
3046}
3047
3048static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
3049{
3050 struct mii_ioctl_data *data = if_mii(rq);
3051 struct netdev_private *np = netdev_priv(dev);
3052
3053 switch(cmd) {
3054 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003055 data->phy_id = np->phy_addr_external;
3056 /* Fall Through */
3057
3058 case SIOCGMIIREG: /* Read MII PHY register. */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003059 /* The phy_id is not enough to uniquely identify
3060 * the intended target. Therefore the command is sent to
3061 * the given mii on the current port.
3062 */
3063 if (dev->if_port == PORT_TP) {
3064 if ((data->phy_id & 0x1f) == np->phy_addr_external)
3065 data->val_out = mdio_read(dev,
3066 data->reg_num & 0x1f);
3067 else
3068 data->val_out = 0;
3069 } else {
3070 move_int_phy(dev, data->phy_id & 0x1f);
3071 data->val_out = miiport_read(dev, data->phy_id & 0x1f,
3072 data->reg_num & 0x1f);
3073 }
3074 return 0;
3075
3076 case SIOCSMIIREG: /* Write MII PHY register. */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003077 if (dev->if_port == PORT_TP) {
3078 if ((data->phy_id & 0x1f) == np->phy_addr_external) {
3079 if ((data->reg_num & 0x1f) == MII_ADVERTISE)
3080 np->advertising = data->val_in;
3081 mdio_write(dev, data->reg_num & 0x1f,
3082 data->val_in);
3083 }
3084 } else {
3085 if ((data->phy_id & 0x1f) == np->phy_addr_external) {
3086 if ((data->reg_num & 0x1f) == MII_ADVERTISE)
3087 np->advertising = data->val_in;
3088 }
3089 move_int_phy(dev, data->phy_id & 0x1f);
3090 miiport_write(dev, data->phy_id & 0x1f,
3091 data->reg_num & 0x1f,
3092 data->val_in);
3093 }
3094 return 0;
3095 default:
3096 return -EOPNOTSUPP;
3097 }
3098}
3099
3100static void enable_wol_mode(struct net_device *dev, int enable_intr)
3101{
3102 void __iomem * ioaddr = ns_ioaddr(dev);
3103 struct netdev_private *np = netdev_priv(dev);
3104
3105 if (netif_msg_wol(np))
3106 printk(KERN_INFO "%s: remaining active for wake-on-lan\n",
3107 dev->name);
3108
3109 /* For WOL we must restart the rx process in silent mode.
3110 * Write NULL to the RxRingPtr. Only possible if
3111 * rx process is stopped
3112 */
3113 writel(0, ioaddr + RxRingPtr);
3114
3115 /* read WoL status to clear */
3116 readl(ioaddr + WOLCmd);
3117
3118 /* PME on, clear status */
3119 writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun);
3120
3121 /* and restart the rx process */
3122 writel(RxOn, ioaddr + ChipCmd);
3123
3124 if (enable_intr) {
3125 /* enable the WOL interrupt.
3126 * Could be used to send a netlink message.
3127 */
3128 writel(WOLPkt | LinkChange, ioaddr + IntrMask);
broonie@sirena.org.uk14fdd902007-03-14 19:49:13 +00003129 natsemi_irq_enable(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003130 }
3131}
3132
3133static int netdev_close(struct net_device *dev)
3134{
3135 void __iomem * ioaddr = ns_ioaddr(dev);
3136 struct netdev_private *np = netdev_priv(dev);
3137
3138 if (netif_msg_ifdown(np))
3139 printk(KERN_DEBUG
3140 "%s: Shutting down ethercard, status was %#04x.\n",
3141 dev->name, (int)readl(ioaddr + ChipCmd));
3142 if (netif_msg_pktdata(np))
3143 printk(KERN_DEBUG
3144 "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
3145 dev->name, np->cur_tx, np->dirty_tx,
3146 np->cur_rx, np->dirty_rx);
3147
Stephen Hemmingerbea33482007-10-03 16:41:36 -07003148 napi_disable(&np->napi);
3149
Linus Torvalds1da177e2005-04-16 15:20:36 -07003150 /*
3151 * FIXME: what if someone tries to close a device
3152 * that is suspended?
3153 * Should we reenable the nic to switch to
3154 * the final WOL settings?
3155 */
3156
3157 del_timer_sync(&np->timer);
3158 disable_irq(dev->irq);
3159 spin_lock_irq(&np->lock);
Mark Brownb27a16b2006-02-02 00:00:01 +00003160 natsemi_irq_disable(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003161 np->hands_off = 1;
3162 spin_unlock_irq(&np->lock);
3163 enable_irq(dev->irq);
3164
3165 free_irq(dev->irq, dev);
3166
3167 /* Interrupt disabled, interrupt handler released,
3168 * queue stopped, timer deleted, rtnl_lock held
3169 * All async codepaths that access the driver are disabled.
3170 */
3171 spin_lock_irq(&np->lock);
3172 np->hands_off = 0;
3173 readl(ioaddr + IntrMask);
3174 readw(ioaddr + MIntrStatus);
3175
3176 /* Freeze Stats */
3177 writel(StatsFreeze, ioaddr + StatsCtrl);
3178
3179 /* Stop the chip's Tx and Rx processes. */
3180 natsemi_stop_rxtx(dev);
3181
3182 __get_stats(dev);
3183 spin_unlock_irq(&np->lock);
3184
3185 /* clear the carrier last - an interrupt could reenable it otherwise */
3186 netif_carrier_off(dev);
3187 netif_stop_queue(dev);
3188
3189 dump_ring(dev);
3190 drain_ring(dev);
3191 free_ring(dev);
3192
3193 {
3194 u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
3195 if (wol) {
3196 /* restart the NIC in WOL mode.
3197 * The nic must be stopped for this.
3198 */
3199 enable_wol_mode(dev, 0);
3200 } else {
3201 /* Restore PME enable bit unmolested */
3202 writel(np->SavedClkRun, ioaddr + ClkRun);
3203 }
3204 }
3205 return 0;
3206}
3207
3208
3209static void __devexit natsemi_remove1 (struct pci_dev *pdev)
3210{
3211 struct net_device *dev = pci_get_drvdata(pdev);
3212 void __iomem * ioaddr = ns_ioaddr(dev);
3213
Mark Brown1a147802007-05-03 10:36:56 +01003214 NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003215 unregister_netdev (dev);
3216 pci_release_regions (pdev);
3217 iounmap(ioaddr);
3218 free_netdev (dev);
3219 pci_set_drvdata(pdev, NULL);
3220}
3221
3222#ifdef CONFIG_PM
3223
3224/*
3225 * The ns83815 chip doesn't have explicit RxStop bits.
3226 * Kicking the Rx or Tx process for a new packet reenables the Rx process
3227 * of the nic, thus this function must be very careful:
3228 *
3229 * suspend/resume synchronization:
3230 * entry points:
3231 * netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler,
Arjan van de Vened4cb132008-10-05 07:35:05 +00003232 * start_tx, ns_tx_timeout
Linus Torvalds1da177e2005-04-16 15:20:36 -07003233 *
3234 * No function accesses the hardware without checking np->hands_off.
3235 * the check occurs under spin_lock_irq(&np->lock);
3236 * exceptions:
3237 * * netdev_ioctl: noncritical access.
3238 * * netdev_open: cannot happen due to the device_detach
3239 * * netdev_close: doesn't hurt.
3240 * * netdev_timer: timer stopped by natsemi_suspend.
3241 * * intr_handler: doesn't acquire the spinlock. suspend calls
3242 * disable_irq() to enforce synchronization.
Mark Brownb27a16b2006-02-02 00:00:01 +00003243 * * natsemi_poll: checks before reenabling interrupts. suspend
3244 * sets hands_off, disables interrupts and then waits with
Stephen Hemmingerbea33482007-10-03 16:41:36 -07003245 * napi_disable().
Linus Torvalds1da177e2005-04-16 15:20:36 -07003246 *
3247 * Interrupts must be disabled, otherwise hands_off can cause irq storms.
3248 */
3249
3250static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state)
3251{
3252 struct net_device *dev = pci_get_drvdata (pdev);
3253 struct netdev_private *np = netdev_priv(dev);
3254 void __iomem * ioaddr = ns_ioaddr(dev);
3255
3256 rtnl_lock();
3257 if (netif_running (dev)) {
3258 del_timer_sync(&np->timer);
3259
3260 disable_irq(dev->irq);
3261 spin_lock_irq(&np->lock);
3262
broonie@sirena.org.uk14fdd902007-03-14 19:49:13 +00003263 natsemi_irq_disable(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003264 np->hands_off = 1;
3265 natsemi_stop_rxtx(dev);
3266 netif_stop_queue(dev);
3267
3268 spin_unlock_irq(&np->lock);
3269 enable_irq(dev->irq);
3270
Stephen Hemmingerbea33482007-10-03 16:41:36 -07003271 napi_disable(&np->napi);
Mark Brownb27a16b2006-02-02 00:00:01 +00003272
Linus Torvalds1da177e2005-04-16 15:20:36 -07003273 /* Update the error counts. */
3274 __get_stats(dev);
3275
3276 /* pci_power_off(pdev, -1); */
3277 drain_ring(dev);
3278 {
3279 u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
3280 /* Restore PME enable bit */
3281 if (wol) {
3282 /* restart the NIC in WOL mode.
3283 * The nic must be stopped for this.
3284 * FIXME: use the WOL interrupt
3285 */
3286 enable_wol_mode(dev, 0);
3287 } else {
3288 /* Restore PME enable bit unmolested */
3289 writel(np->SavedClkRun, ioaddr + ClkRun);
3290 }
3291 }
3292 }
3293 netif_device_detach(dev);
3294 rtnl_unlock();
3295 return 0;
3296}
3297
3298
3299static int natsemi_resume (struct pci_dev *pdev)
3300{
3301 struct net_device *dev = pci_get_drvdata (pdev);
3302 struct netdev_private *np = netdev_priv(dev);
Mark Browna8a935d2007-10-10 17:11:12 +01003303 int ret = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003304
3305 rtnl_lock();
3306 if (netif_device_present(dev))
3307 goto out;
3308 if (netif_running(dev)) {
3309 BUG_ON(!np->hands_off);
Mark Browna8a935d2007-10-10 17:11:12 +01003310 ret = pci_enable_device(pdev);
3311 if (ret < 0) {
3312 dev_err(&pdev->dev,
3313 "pci_enable_device() failed: %d\n", ret);
3314 goto out;
3315 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003316 /* pci_power_on(pdev); */
3317
Stephen Hemmingerbea33482007-10-03 16:41:36 -07003318 napi_enable(&np->napi);
3319
Linus Torvalds1da177e2005-04-16 15:20:36 -07003320 natsemi_reset(dev);
3321 init_ring(dev);
3322 disable_irq(dev->irq);
3323 spin_lock_irq(&np->lock);
3324 np->hands_off = 0;
3325 init_registers(dev);
3326 netif_device_attach(dev);
3327 spin_unlock_irq(&np->lock);
3328 enable_irq(dev->irq);
3329
Mark Brown0e5d5442007-10-10 11:05:44 +01003330 mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ));
Linus Torvalds1da177e2005-04-16 15:20:36 -07003331 }
3332 netif_device_attach(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003333out:
3334 rtnl_unlock();
Mark Browna8a935d2007-10-10 17:11:12 +01003335 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003336}
3337
3338#endif /* CONFIG_PM */
3339
3340static struct pci_driver natsemi_driver = {
3341 .name = DRV_NAME,
3342 .id_table = natsemi_pci_tbl,
3343 .probe = natsemi_probe1,
3344 .remove = __devexit_p(natsemi_remove1),
3345#ifdef CONFIG_PM
3346 .suspend = natsemi_suspend,
3347 .resume = natsemi_resume,
3348#endif
3349};
3350
3351static int __init natsemi_init_mod (void)
3352{
3353/* when a module, this is printed whether or not devices are found in probe */
3354#ifdef MODULE
3355 printk(version);
3356#endif
3357
Jeff Garzik29917622006-08-19 17:48:59 -04003358 return pci_register_driver(&natsemi_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003359}
3360
3361static void __exit natsemi_exit_mod (void)
3362{
3363 pci_unregister_driver (&natsemi_driver);
3364}
3365
3366module_init(natsemi_init_mod);
3367module_exit(natsemi_exit_mod);
3368