blob: f9ca72e937ee177feb0f54d10afabd51fbd74183 [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata-cs5530.c - CS5530 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
Jeff Garzik669a5db2006-08-29 18:12:40 -04004 *
5 * based upon cs5530.c by Mark Lord.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 *
20 * Loosely based on the piix & svwks drivers.
21 *
22 * Documentation:
23 * Available from AMD web site.
24 */
25
26#include <linux/kernel.h>
27#include <linux/module.h>
28#include <linux/pci.h>
Jeff Garzik669a5db2006-08-29 18:12:40 -040029#include <linux/blkdev.h>
30#include <linux/delay.h>
31#include <scsi/scsi_host.h>
32#include <linux/libata.h>
33#include <linux/dmi.h>
34
35#define DRV_NAME "pata_cs5530"
Jeff Garzik2a3103c2007-08-31 04:54:06 -040036#define DRV_VERSION "0.7.4"
Jeff Garzik669a5db2006-08-29 18:12:40 -040037
Tejun Heo0d5ff562007-02-01 15:06:36 +090038static void __iomem *cs5530_port_base(struct ata_port *ap)
39{
40 unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
41
42 return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
43}
44
Jeff Garzik669a5db2006-08-29 18:12:40 -040045/**
46 * cs5530_set_piomode - PIO setup
47 * @ap: ATA interface
48 * @adev: device on the interface
49 *
50 * Set our PIO requirements. This is fairly simple on the CS5530
51 * chips.
52 */
53
54static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
55{
56 static const unsigned int cs5530_pio_timings[2][5] = {
57 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
58 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
59 };
Tejun Heo0d5ff562007-02-01 15:06:36 +090060 void __iomem *base = cs5530_port_base(ap);
Jeff Garzik669a5db2006-08-29 18:12:40 -040061 u32 tuning;
62 int format;
63
64 /* Find out which table to use */
Tejun Heo0d5ff562007-02-01 15:06:36 +090065 tuning = ioread32(base + 0x04);
Jeff Garzik669a5db2006-08-29 18:12:40 -040066 format = (tuning & 0x80000000UL) ? 1 : 0;
67
68 /* Now load the right timing register */
69 if (adev->devno)
70 base += 0x08;
71
Tejun Heo0d5ff562007-02-01 15:06:36 +090072 iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
Jeff Garzik669a5db2006-08-29 18:12:40 -040073}
74
75/**
76 * cs5530_set_dmamode - DMA timing setup
77 * @ap: ATA interface
78 * @adev: Device being configured
79 *
80 * We cannot mix MWDMA and UDMA without reloading timings each switch
81 * master to slave. We track the last DMA setup in order to minimise
82 * reloads.
83 */
84
85static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
86{
Tejun Heo0d5ff562007-02-01 15:06:36 +090087 void __iomem *base = cs5530_port_base(ap);
Jeff Garzik669a5db2006-08-29 18:12:40 -040088 u32 tuning, timing = 0;
89 u8 reg;
90
91 /* Find out which table to use */
Tejun Heo0d5ff562007-02-01 15:06:36 +090092 tuning = ioread32(base + 0x04);
Jeff Garzik669a5db2006-08-29 18:12:40 -040093
94 switch(adev->dma_mode) {
95 case XFER_UDMA_0:
96 timing = 0x00921250;break;
97 case XFER_UDMA_1:
98 timing = 0x00911140;break;
99 case XFER_UDMA_2:
100 timing = 0x00911030;break;
101 case XFER_MW_DMA_0:
102 timing = 0x00077771;break;
103 case XFER_MW_DMA_1:
104 timing = 0x00012121;break;
105 case XFER_MW_DMA_2:
106 timing = 0x00002020;break;
107 default:
108 BUG();
109 }
110 /* Merge in the PIO format bit */
111 timing |= (tuning & 0x80000000UL);
112 if (adev->devno == 0) /* Master */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900113 iowrite32(timing, base + 0x04);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400114 else {
115 if (timing & 0x00100000)
116 tuning |= 0x00100000; /* UDMA for both */
117 else
118 tuning &= ~0x00100000; /* MWDMA for both */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900119 iowrite32(tuning, base + 0x04);
120 iowrite32(timing, base + 0x0C);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400121 }
122
123 /* Set the DMA capable bit in the BMDMA area */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900124 reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400125 reg |= (1 << (5 + adev->devno));
Tejun Heo0d5ff562007-02-01 15:06:36 +0900126 iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400127
128 /* Remember the last DMA setup we did */
129
130 ap->private_data = adev;
131}
132
133/**
Tejun Heo9363c382008-04-07 22:47:16 +0900134 * cs5530_qc_issue - command issue
Jeff Garzik669a5db2006-08-29 18:12:40 -0400135 * @qc: command pending
136 *
137 * Called when the libata layer is about to issue a command. We wrap
138 * this interface so that we can load the correct ATA timings if
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200139 * necessary. Specifically we have a problem that there is only
Jeff Garzik669a5db2006-08-29 18:12:40 -0400140 * one MWDMA/UDMA bit.
141 */
142
Tejun Heo9363c382008-04-07 22:47:16 +0900143static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400144{
145 struct ata_port *ap = qc->ap;
146 struct ata_device *adev = qc->dev;
147 struct ata_device *prev = ap->private_data;
148
149 /* See if the DMA settings could be wrong */
Alan Coxb15b3eb2008-08-01 09:18:34 +0100150 if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400151 /* Maybe, but do the channels match MWDMA/UDMA ? */
Alan Coxb15b3eb2008-08-01 09:18:34 +0100152 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
153 (ata_using_udma(prev) && !ata_using_udma(adev)))
Jeff Garzik669a5db2006-08-29 18:12:40 -0400154 /* Switch the mode bits */
155 cs5530_set_dmamode(ap, adev);
156 }
157
Tejun Heo360ff782010-05-10 21:41:42 +0200158 return ata_bmdma_qc_issue(qc);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400159}
160
Jeff Garzik669a5db2006-08-29 18:12:40 -0400161static struct scsi_host_template cs5530_sht = {
Tejun Heo68d1d072008-03-25 12:22:49 +0900162 ATA_BMDMA_SHT(DRV_NAME),
163 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400164};
165
166static struct ata_port_operations cs5530_port_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900167 .inherits = &ata_bmdma_port_ops,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400168
Tejun Heof47451c2010-05-10 21:41:40 +0200169 .qc_prep = ata_bmdma_dumb_qc_prep,
Tejun Heo9363c382008-04-07 22:47:16 +0900170 .qc_issue = cs5530_qc_issue,
Jeff Garzikbda30282006-09-27 05:41:13 -0400171
Tejun Heo029cfd62008-03-25 12:22:49 +0900172 .cable_detect = ata_cable_40wire,
173 .set_piomode = cs5530_set_piomode,
174 .set_dmamode = cs5530_set_dmamode,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400175};
176
Jeff Garzik18552562007-10-03 15:15:40 -0400177static const struct dmi_system_id palmax_dmi_table[] = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400178 {
179 .ident = "Palmax PD1100",
180 .matches = {
181 DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
182 DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
183 },
184 },
185 { }
186};
187
188static int cs5530_is_palmax(void)
189{
190 if (dmi_check_system(palmax_dmi_table)) {
191 printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
192 return 1;
193 }
194 return 0;
195}
196
Alanf7e37ba2006-11-22 17:21:03 +0000197
Jeff Garzik669a5db2006-08-29 18:12:40 -0400198/**
Alanf7e37ba2006-11-22 17:21:03 +0000199 * cs5530_init_chip - Chipset init
Jeff Garzik669a5db2006-08-29 18:12:40 -0400200 *
Alanf7e37ba2006-11-22 17:21:03 +0000201 * Perform the chip initialisation work that is shared between both
202 * setup and resume paths
Jeff Garzik669a5db2006-08-29 18:12:40 -0400203 */
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500204
Alanf7e37ba2006-11-22 17:21:03 +0000205static int cs5530_init_chip(void)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400206{
Alanf7e37ba2006-11-22 17:21:03 +0000207 struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400208
Jeff Garzik669a5db2006-08-29 18:12:40 -0400209 while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
210 switch (dev->device) {
211 case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
212 master_0 = pci_dev_get(dev);
213 break;
214 case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
215 cs5530_0 = pci_dev_get(dev);
216 break;
217 }
218 }
219 if (!master_0) {
220 printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
221 goto fail_put;
222 }
223 if (!cs5530_0) {
224 printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
225 goto fail_put;
226 }
227
228 pci_set_master(cs5530_0);
Randy Dunlap694625c2007-07-09 11:55:54 -0700229 pci_try_set_mwi(cs5530_0);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400230
231 /*
232 * Set PCI CacheLineSize to 16-bytes:
233 * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
234 *
235 * Note: This value is constant because the 5530 is only a Geode companion
236 */
237
238 pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
239
240 /*
241 * Disable trapping of UDMA register accesses (Win98 hack):
242 * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
243 */
244
245 pci_write_config_word(cs5530_0, 0xd0, 0x5006);
246
247 /*
248 * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
249 * The other settings are what is necessary to get the register
250 * into a sane state for IDE DMA operation.
251 */
252
253 pci_write_config_byte(master_0, 0x40, 0x1e);
254
255 /*
256 * Set max PCI burst size (16-bytes seems to work best):
257 * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
258 * all others: clear bit-1 at 0x41, and do:
259 * 128bytes: OR 0x00 at 0x41
260 * 256bytes: OR 0x04 at 0x41
261 * 512bytes: OR 0x08 at 0x41
262 * 1024bytes: OR 0x0c at 0x41
263 */
264
265 pci_write_config_byte(master_0, 0x41, 0x14);
266
267 /*
268 * These settings are necessary to get the chip
269 * into a sane state for IDE DMA operation.
270 */
271
272 pci_write_config_byte(master_0, 0x42, 0x00);
273 pci_write_config_byte(master_0, 0x43, 0xc1);
274
275 pci_dev_put(master_0);
276 pci_dev_put(cs5530_0);
Alanf7e37ba2006-11-22 17:21:03 +0000277 return 0;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400278fail_put:
Markus Elfring214f1af2015-02-02 22:08:29 +0100279 pci_dev_put(master_0);
280 pci_dev_put(cs5530_0);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400281 return -ENODEV;
282}
283
Alanf7e37ba2006-11-22 17:21:03 +0000284/**
285 * cs5530_init_one - Initialise a CS5530
286 * @dev: PCI device
287 * @id: Entry in match table
288 *
289 * Install a driver for the newly found CS5530 companion chip. Most of
290 * this is just housekeeping. We have to set the chip up correctly and
291 * turn off various bits of emulation magic.
292 */
293
294static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
295{
Tejun Heo1626aeb2007-05-04 12:43:58 +0200296 static const struct ata_port_info info = {
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400297 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100298 .pio_mask = ATA_PIO4,
299 .mwdma_mask = ATA_MWDMA2,
300 .udma_mask = ATA_UDMA2,
Alanf7e37ba2006-11-22 17:21:03 +0000301 .port_ops = &cs5530_port_ops
302 };
303 /* The docking connector doesn't do UDMA, and it seems not MWDMA */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200304 static const struct ata_port_info info_palmax_secondary = {
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400305 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100306 .pio_mask = ATA_PIO4,
Alanf7e37ba2006-11-22 17:21:03 +0000307 .port_ops = &cs5530_port_ops
308 };
Tejun Heo1626aeb2007-05-04 12:43:58 +0200309 const struct ata_port_info *ppi[] = { &info, NULL };
Tejun Heof08048e2008-03-25 12:22:47 +0900310 int rc;
311
312 rc = pcim_enable_device(pdev);
313 if (rc)
314 return rc;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500315
Alanf7e37ba2006-11-22 17:21:03 +0000316 /* Chip initialisation */
317 if (cs5530_init_chip())
318 return -ENODEV;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500319
Alanf7e37ba2006-11-22 17:21:03 +0000320 if (cs5530_is_palmax())
Tejun Heo1626aeb2007-05-04 12:43:58 +0200321 ppi[1] = &info_palmax_secondary;
Alanf7e37ba2006-11-22 17:21:03 +0000322
323 /* Now kick off ATA set up */
Tejun Heo1c5afdf2010-05-19 22:10:22 +0200324 return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
Alanf7e37ba2006-11-22 17:21:03 +0000325}
326
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +0200327#ifdef CONFIG_PM_SLEEP
Alanf7e37ba2006-11-22 17:21:03 +0000328static int cs5530_reinit_one(struct pci_dev *pdev)
329{
Jingoo Han0a86e1c2013-06-03 14:05:36 +0900330 struct ata_host *host = pci_get_drvdata(pdev);
Tejun Heof08048e2008-03-25 12:22:47 +0900331 int rc;
332
333 rc = ata_pci_device_do_resume(pdev);
334 if (rc)
335 return rc;
336
Alanf7e37ba2006-11-22 17:21:03 +0000337 /* If we fail on resume we are doomed */
Andrew Morton01532602006-12-20 13:03:11 -0500338 if (cs5530_init_chip())
Tejun Heof08048e2008-03-25 12:22:47 +0900339 return -EIO;
340
341 ata_host_resume(host);
342 return 0;
Alanf7e37ba2006-11-22 17:21:03 +0000343}
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +0200344#endif /* CONFIG_PM_SLEEP */
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500345
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400346static const struct pci_device_id cs5530[] = {
347 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
348
349 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400350};
351
352static struct pci_driver cs5530_pci_driver = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400353 .name = DRV_NAME,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400354 .id_table = cs5530,
355 .probe = cs5530_init_one,
Alanf7e37ba2006-11-22 17:21:03 +0000356 .remove = ata_pci_remove_one,
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +0200357#ifdef CONFIG_PM_SLEEP
Alanf7e37ba2006-11-22 17:21:03 +0000358 .suspend = ata_pci_device_suspend,
359 .resume = cs5530_reinit_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900360#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400361};
362
Axel Lin2fc75da2012-04-19 13:43:05 +0800363module_pci_driver(cs5530_pci_driver);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400364
Jeff Garzik669a5db2006-08-29 18:12:40 -0400365MODULE_AUTHOR("Alan Cox");
366MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
367MODULE_LICENSE("GPL");
368MODULE_DEVICE_TABLE(pci, cs5530);
369MODULE_VERSION(DRV_VERSION);