blob: 271c28dc9baae1057681ce326ea4bc81e50e8756 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*------------------------------------------------------------------------
2 . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device.
3 .
4 . Copyright (C) 1996 by Erik Stahlman
5 . Copyright (C) 2001 Standard Microsystems Corporation
6 . Developed by Simple Network Magic Corporation
7 . Copyright (C) 2003 Monta Vista Software, Inc.
8 . Unified SMC91x driver by Nicolas Pitre
9 .
10 . This program is free software; you can redistribute it and/or modify
11 . it under the terms of the GNU General Public License as published by
12 . the Free Software Foundation; either version 2 of the License, or
13 . (at your option) any later version.
14 .
15 . This program is distributed in the hope that it will be useful,
16 . but WITHOUT ANY WARRANTY; without even the implied warranty of
17 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 . GNU General Public License for more details.
19 .
20 . You should have received a copy of the GNU General Public License
21 . along with this program; if not, write to the Free Software
22 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 .
24 . Information contained in this file was obtained from the LAN91C111
25 . manual from SMC. To get a copy, if you really want one, you can find
26 . information under www.smsc.com.
27 .
28 . Authors
29 . Erik Stahlman <erik@vt.edu>
30 . Daris A Nevil <dnevil@snmc.com>
31 . Nicolas Pitre <nico@cam.org>
32 .
33 ---------------------------------------------------------------------------*/
34#ifndef _SMC91X_H_
35#define _SMC91X_H_
36
37
38/*
39 * Define your architecture specific bus configuration parameters here.
40 */
41
42#if defined(CONFIG_ARCH_LUBBOCK)
43
44/* We can only do 16-bit reads and writes in the static memory space. */
45#define SMC_CAN_USE_8BIT 0
46#define SMC_CAN_USE_16BIT 1
47#define SMC_CAN_USE_32BIT 0
48#define SMC_NOWAIT 1
49
50/* The first two address lines aren't connected... */
51#define SMC_IO_SHIFT 2
52
53#define SMC_inw(a, r) readw((a) + (r))
54#define SMC_outw(v, a, r) writew(v, (a) + (r))
55#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
56#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
Russell Kinge7b3dc72008-01-14 22:30:10 +000057#define SMC_IRQ_FLAGS (-1) /* from resource */
Linus Torvalds1da177e2005-04-16 15:20:36 -070058
Mike Frysinger95af9fe2007-11-23 17:55:50 +080059#elif defined(CONFIG_BLACKFIN)
Wu, Bryan0851a282007-05-06 14:50:32 -070060
61#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
Jean-Christian de Rivazc5760abd2007-06-11 17:44:14 +080062#define RPC_LSA_DEFAULT RPC_LED_100_10
63#define RPC_LSB_DEFAULT RPC_LED_TX_RX
Wu, Bryan0851a282007-05-06 14:50:32 -070064
65# if defined (CONFIG_BFIN561_EZKIT)
66#define SMC_CAN_USE_8BIT 0
67#define SMC_CAN_USE_16BIT 1
68#define SMC_CAN_USE_32BIT 1
69#define SMC_IO_SHIFT 0
70#define SMC_NOWAIT 1
71#define SMC_USE_BFIN_DMA 0
72
73
74#define SMC_inw(a, r) readw((a) + (r))
75#define SMC_outw(v, a, r) writew(v, (a) + (r))
76#define SMC_inl(a, r) readl((a) + (r))
77#define SMC_outl(v, a, r) writel(v, (a) + (r))
78#define SMC_outsl(a, r, p, l) outsl((unsigned long *)((a) + (r)), p, l)
79#define SMC_insl(a, r, p, l) insl ((unsigned long *)((a) + (r)), p, l)
80# else
81#define SMC_CAN_USE_8BIT 0
82#define SMC_CAN_USE_16BIT 1
83#define SMC_CAN_USE_32BIT 0
84#define SMC_IO_SHIFT 0
85#define SMC_NOWAIT 1
86#define SMC_USE_BFIN_DMA 0
87
88
89#define SMC_inw(a, r) readw((a) + (r))
90#define SMC_outw(v, a, r) writew(v, (a) + (r))
91#define SMC_outsw(a, r, p, l) outsw((unsigned long *)((a) + (r)), p, l)
92#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
93# endif
94/* check if the mac in reg is valid */
95#define SMC_GET_MAC_ADDR(addr) \
96 do { \
97 unsigned int __v; \
98 __v = SMC_inw(ioaddr, ADDR0_REG); \
99 addr[0] = __v; addr[1] = __v >> 8; \
100 __v = SMC_inw(ioaddr, ADDR1_REG); \
101 addr[2] = __v; addr[3] = __v >> 8; \
102 __v = SMC_inw(ioaddr, ADDR2_REG); \
103 addr[4] = __v; addr[5] = __v >> 8; \
104 if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
105 random_ether_addr(addr); \
106 } \
107 } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
109
110/* We can only do 16-bit reads and writes in the static memory space. */
111#define SMC_CAN_USE_8BIT 0
112#define SMC_CAN_USE_16BIT 1
113#define SMC_CAN_USE_32BIT 0
114#define SMC_NOWAIT 1
115
116#define SMC_IO_SHIFT 0
117
118#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r)))
119#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v)
120#define SMC_insw(a, r, p, l) \
121 do { \
122 unsigned long __port = (a) + (r); \
123 u16 *__p = (u16 *)(p); \
124 int __l = (l); \
125 insw(__port, __p, __l); \
126 while (__l > 0) { \
127 *__p = swab16(*__p); \
128 __p++; \
129 __l--; \
130 } \
131 } while (0)
132#define SMC_outsw(a, r, p, l) \
133 do { \
134 unsigned long __port = (a) + (r); \
135 u16 *__p = (u16 *)(p); \
136 int __l = (l); \
137 while (__l > 0) { \
138 /* Believe it or not, the swab isn't needed. */ \
139 outw( /* swab16 */ (*__p++), __port); \
140 __l--; \
141 } \
142 } while (0)
Russell King9ded96f2006-01-08 01:02:07 -0800143#define SMC_IRQ_FLAGS (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144
145#elif defined(CONFIG_SA1100_PLEB)
146/* We can only do 16-bit reads and writes in the static memory space. */
147#define SMC_CAN_USE_8BIT 1
148#define SMC_CAN_USE_16BIT 1
149#define SMC_CAN_USE_32BIT 0
150#define SMC_IO_SHIFT 0
151#define SMC_NOWAIT 1
152
Russell King1cf99be2005-11-12 21:49:36 +0000153#define SMC_inb(a, r) readb((a) + (r))
154#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
155#define SMC_inw(a, r) readw((a) + (r))
156#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
157#define SMC_outb(v, a, r) writeb(v, (a) + (r))
158#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
159#define SMC_outw(v, a, r) writew(v, (a) + (r))
160#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700161
Russell Kinge7b3dc72008-01-14 22:30:10 +0000162#define SMC_IRQ_FLAGS (-1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700163
164#elif defined(CONFIG_SA1100_ASSABET)
165
166#include <asm/arch/neponset.h>
167
168/* We can only do 8-bit reads and writes in the static memory space. */
169#define SMC_CAN_USE_8BIT 1
170#define SMC_CAN_USE_16BIT 0
171#define SMC_CAN_USE_32BIT 0
172#define SMC_NOWAIT 1
173
174/* The first two address lines aren't connected... */
175#define SMC_IO_SHIFT 2
176
177#define SMC_inb(a, r) readb((a) + (r))
178#define SMC_outb(v, a, r) writeb(v, (a) + (r))
179#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
180#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
Russell Kinge7b3dc72008-01-14 22:30:10 +0000181#define SMC_IRQ_FLAGS (-1) /* from resource */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182
Lennert Buytenhekb0348b92006-03-28 17:19:50 +0200183#elif defined(CONFIG_MACH_LOGICPD_PXA270)
184
185#define SMC_CAN_USE_8BIT 0
186#define SMC_CAN_USE_16BIT 1
187#define SMC_CAN_USE_32BIT 0
188#define SMC_IO_SHIFT 0
189#define SMC_NOWAIT 1
Lennert Buytenhekb0348b92006-03-28 17:19:50 +0200190
Lennert Buytenhekb0348b92006-03-28 17:19:50 +0200191#define SMC_inw(a, r) readw((a) + (r))
Lennert Buytenhekb0348b92006-03-28 17:19:50 +0200192#define SMC_outw(v, a, r) writew(v, (a) + (r))
Lennert Buytenhekb0348b92006-03-28 17:19:50 +0200193#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
194#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196#elif defined(CONFIG_ARCH_INNOKOM) || \
197 defined(CONFIG_MACH_MAINSTONE) || \
198 defined(CONFIG_ARCH_PXA_IDP) || \
Robert Schwebel4f15a982008-01-08 08:50:02 +0100199 defined(CONFIG_ARCH_RAMSES) || \
200 defined(CONFIG_ARCH_PCM027)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201
202#define SMC_CAN_USE_8BIT 1
203#define SMC_CAN_USE_16BIT 1
204#define SMC_CAN_USE_32BIT 1
205#define SMC_IO_SHIFT 0
206#define SMC_NOWAIT 1
207#define SMC_USE_PXA_DMA 1
208
209#define SMC_inb(a, r) readb((a) + (r))
210#define SMC_inw(a, r) readw((a) + (r))
211#define SMC_inl(a, r) readl((a) + (r))
212#define SMC_outb(v, a, r) writeb(v, (a) + (r))
213#define SMC_outl(v, a, r) writel(v, (a) + (r))
214#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
215#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
Russell Kinge7b3dc72008-01-14 22:30:10 +0000216#define SMC_IRQ_FLAGS (-1) /* from resource */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217
218/* We actually can't write halfwords properly if not word aligned */
219static inline void
Nicolas Pitreeb1d6982005-05-12 20:19:09 -0400220SMC_outw(u16 val, void __iomem *ioaddr, int reg)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221{
222 if (reg & 2) {
223 unsigned int v = val << 16;
224 v |= readl(ioaddr + (reg & ~2)) & 0xffff;
225 writel(v, ioaddr + (reg & ~2));
226 } else {
227 writew(val, ioaddr + reg);
228 }
229}
230
eric miao7c826a02007-10-30 09:48:41 +0800231#elif defined(CONFIG_MACH_ZYLONITE)
232
233#define SMC_CAN_USE_8BIT 1
234#define SMC_CAN_USE_16BIT 1
235#define SMC_CAN_USE_32BIT 0
236#define SMC_IO_SHIFT 0
237#define SMC_NOWAIT 1
238#define SMC_USE_PXA_DMA 1
239#define SMC_inb(a, r) readb((a) + (r))
240#define SMC_inw(a, r) readw((a) + (r))
241#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
242#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
243#define SMC_outb(v, a, r) writeb(v, (a) + (r))
244#define SMC_outw(v, a, r) writew(v, (a) + (r))
Russell Kinge7b3dc72008-01-14 22:30:10 +0000245#define SMC_IRQ_FLAGS (-1) /* from resource */
eric miao7c826a02007-10-30 09:48:41 +0800246
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247#elif defined(CONFIG_ARCH_OMAP)
248
249/* We can only do 16-bit reads and writes in the static memory space. */
250#define SMC_CAN_USE_8BIT 0
251#define SMC_CAN_USE_16BIT 1
252#define SMC_CAN_USE_32BIT 0
253#define SMC_IO_SHIFT 0
254#define SMC_NOWAIT 1
255
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256#define SMC_inw(a, r) readw((a) + (r))
257#define SMC_outw(v, a, r) writew(v, (a) + (r))
258#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
259#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
Russell Kinge7b3dc72008-01-14 22:30:10 +0000260#define SMC_IRQ_FLAGS (-1) /* from resource */
David Brownell5f13e7e2005-05-16 08:53:52 -0700261
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262#elif defined(CONFIG_SH_SH4202_MICRODEV)
263
264#define SMC_CAN_USE_8BIT 0
265#define SMC_CAN_USE_16BIT 1
266#define SMC_CAN_USE_32BIT 0
267
268#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
269#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
270#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
271#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
272#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
273#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
274#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
275#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
276#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
277#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
278
Russell King9ded96f2006-01-08 01:02:07 -0800279#define SMC_IRQ_FLAGS (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280
281#elif defined(CONFIG_ISA)
282
283#define SMC_CAN_USE_8BIT 1
284#define SMC_CAN_USE_16BIT 1
285#define SMC_CAN_USE_32BIT 0
286
287#define SMC_inb(a, r) inb((a) + (r))
288#define SMC_inw(a, r) inw((a) + (r))
289#define SMC_outb(v, a, r) outb(v, (a) + (r))
290#define SMC_outw(v, a, r) outw(v, (a) + (r))
291#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
292#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
293
Nobuhiro Iwamatsu5125ed92007-05-03 18:56:56 +0900294#elif defined(CONFIG_SUPERH)
295
Paul Mundt6026ee62007-06-01 17:36:48 +0900296#ifdef CONFIG_SOLUTION_ENGINE
Nobuhiro Iwamatsu18ad4e72007-09-19 21:07:52 +0900297#define SMC_IRQ_FLAGS (0)
Nobuhiro Iwamatsu5125ed92007-05-03 18:56:56 +0900298#define SMC_CAN_USE_8BIT 0
299#define SMC_CAN_USE_16BIT 1
300#define SMC_CAN_USE_32BIT 0
301#define SMC_IO_SHIFT 0
302#define SMC_NOWAIT 1
303
Nobuhiro Iwamatsu5125ed92007-05-03 18:56:56 +0900304#define SMC_inw(a, r) inw((a) + (r))
Nobuhiro Iwamatsu5125ed92007-05-03 18:56:56 +0900305#define SMC_outw(v, a, r) outw(v, (a) + (r))
306#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
307#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
308
309#else /* BOARDS */
310
311#define SMC_CAN_USE_8BIT 1
312#define SMC_CAN_USE_16BIT 1
Paul Mundt092ed992007-08-01 15:48:55 +0900313#define SMC_CAN_USE_32BIT 0
Nobuhiro Iwamatsu5125ed92007-05-03 18:56:56 +0900314
315#define SMC_inb(a, r) inb((a) + (r))
316#define SMC_inw(a, r) inw((a) + (r))
317#define SMC_outb(v, a, r) outb(v, (a) + (r))
318#define SMC_outw(v, a, r) outw(v, (a) + (r))
319#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
320#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
321
322#endif /* BOARDS */
323
Linus Torvalds1da177e2005-04-16 15:20:36 -0700324#elif defined(CONFIG_M32R)
325
326#define SMC_CAN_USE_8BIT 0
327#define SMC_CAN_USE_16BIT 1
328#define SMC_CAN_USE_32BIT 0
329
Mariusz Kozlowski59dc76a2006-12-04 15:04:56 -0800330#define SMC_inb(a, r) inb(((u32)a) + (r))
Hirokazu Takataf3ac9fb2005-10-30 15:00:06 -0800331#define SMC_inw(a, r) inw(((u32)a) + (r))
332#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
333#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
334#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
335#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700336
Russell King9ded96f2006-01-08 01:02:07 -0800337#define SMC_IRQ_FLAGS (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700338
339#define RPC_LSA_DEFAULT RPC_LED_TX_RX
340#define RPC_LSB_DEFAULT RPC_LED_100_10
341
Marc Singerd4adcff2006-05-16 11:41:40 +0100342#elif defined(CONFIG_MACH_LPD79520) \
343 || defined(CONFIG_MACH_LPD7A400) \
344 || defined(CONFIG_MACH_LPD7A404)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345
Marc Singerd4adcff2006-05-16 11:41:40 +0100346/* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the
347 * way that the CPU handles chip selects and the way that the SMC chip
348 * expects the chip select to operate. Refer to
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349 * Documentation/arm/Sharp-LH/IOBarrier for details. The read from
Marc Singerd4adcff2006-05-16 11:41:40 +0100350 * IOBARRIER is a byte, in order that we read the least-common
351 * denominator. It would be wasteful to read 32 bits from an 8-bit
352 * accessible region.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 *
354 * There is no explicit protection against interrupts intervening
355 * between the writew and the IOBARRIER. In SMC ISR there is a
356 * preamble that performs an IOBARRIER in the extremely unlikely event
357 * that the driver interrupts itself between a writew to the chip an
358 * the IOBARRIER that follows *and* the cache is large enough that the
359 * first off-chip access while handing the interrupt is to the SMC
360 * chip. Other devices in the same address space as the SMC chip must
361 * be aware of the potential for trouble and perform a similar
362 * IOBARRIER on entry to their ISR.
363 */
364
365#include <asm/arch/constants.h> /* IOBARRIER_VIRT */
366
367#define SMC_CAN_USE_8BIT 0
368#define SMC_CAN_USE_16BIT 1
369#define SMC_CAN_USE_32BIT 0
370#define SMC_NOWAIT 0
Marc Singerd4adcff2006-05-16 11:41:40 +0100371#define LPD7X_IOBARRIER readb (IOBARRIER_VIRT)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372
Marc Singerd4adcff2006-05-16 11:41:40 +0100373#define SMC_inw(a,r)\
374 ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; })
375#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; })
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376
Marc Singerd4adcff2006-05-16 11:41:40 +0100377#define SMC_insw LPD7_SMC_insw
378static inline void LPD7_SMC_insw (unsigned char* a, int r,
379 unsigned char* p, int l)
380{
381 unsigned short* ps = (unsigned short*) p;
382 while (l-- > 0) {
383 *ps++ = readw (a + r);
384 LPD7X_IOBARRIER;
385 }
386}
Nicolas Pitre09779c62006-03-20 11:54:27 -0500387
Marc Singerd4adcff2006-05-16 11:41:40 +0100388#define SMC_outsw LPD7_SMC_outsw
389static inline void LPD7_SMC_outsw (unsigned char* a, int r,
390 unsigned char* p, int l)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391{
392 unsigned short* ps = (unsigned short*) p;
393 while (l-- > 0) {
394 writew (*ps++, a + r);
Marc Singerd4adcff2006-05-16 11:41:40 +0100395 LPD7X_IOBARRIER;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396 }
397}
398
Marc Singerd4adcff2006-05-16 11:41:40 +0100399#define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400
401#define RPC_LSA_DEFAULT RPC_LED_TX_RX
402#define RPC_LSB_DEFAULT RPC_LED_100_10
403
Pete Popov55793452005-11-09 22:46:05 -0500404#elif defined(CONFIG_SOC_AU1X00)
405
406#include <au1xxx.h>
407
408/* We can only do 16-bit reads and writes in the static memory space. */
409#define SMC_CAN_USE_8BIT 0
410#define SMC_CAN_USE_16BIT 1
411#define SMC_CAN_USE_32BIT 0
412#define SMC_IO_SHIFT 0
413#define SMC_NOWAIT 1
414
415#define SMC_inw(a, r) au_readw((unsigned long)((a) + (r)))
416#define SMC_insw(a, r, p, l) \
417 do { \
418 unsigned long _a = (unsigned long)((a) + (r)); \
419 int _l = (l); \
420 u16 *_p = (u16 *)(p); \
421 while (_l-- > 0) \
422 *_p++ = au_readw(_a); \
423 } while(0)
424#define SMC_outw(v, a, r) au_writew(v, (unsigned long)((a) + (r)))
425#define SMC_outsw(a, r, p, l) \
426 do { \
427 unsigned long _a = (unsigned long)((a) + (r)); \
428 int _l = (l); \
429 const u16 *_p = (const u16 *)(p); \
430 while (_l-- > 0) \
431 au_writew(*_p++ , _a); \
432 } while(0)
433
Russell King9ded96f2006-01-08 01:02:07 -0800434#define SMC_IRQ_FLAGS (0)
Pete Popov55793452005-11-09 22:46:05 -0500435
Deepak Saxena8431adf2006-07-11 23:02:48 -0700436#elif defined(CONFIG_ARCH_VERSATILE)
437
438#define SMC_CAN_USE_8BIT 1
439#define SMC_CAN_USE_16BIT 1
440#define SMC_CAN_USE_32BIT 1
441#define SMC_NOWAIT 1
442
443#define SMC_inb(a, r) readb((a) + (r))
444#define SMC_inw(a, r) readw((a) + (r))
445#define SMC_inl(a, r) readl((a) + (r))
446#define SMC_outb(v, a, r) writeb(v, (a) + (r))
447#define SMC_outw(v, a, r) writew(v, (a) + (r))
448#define SMC_outl(v, a, r) writel(v, (a) + (r))
449#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
450#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
Russell Kinge7b3dc72008-01-14 22:30:10 +0000451#define SMC_IRQ_FLAGS (-1) /* from resource */
Deepak Saxena8431adf2006-07-11 23:02:48 -0700452
Linus Torvalds1da177e2005-04-16 15:20:36 -0700453#else
454
455#define SMC_CAN_USE_8BIT 1
456#define SMC_CAN_USE_16BIT 1
457#define SMC_CAN_USE_32BIT 1
458#define SMC_NOWAIT 1
459
460#define SMC_inb(a, r) readb((a) + (r))
461#define SMC_inw(a, r) readw((a) + (r))
462#define SMC_inl(a, r) readl((a) + (r))
463#define SMC_outb(v, a, r) writeb(v, (a) + (r))
464#define SMC_outw(v, a, r) writew(v, (a) + (r))
465#define SMC_outl(v, a, r) writel(v, (a) + (r))
466#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
467#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
468
469#define RPC_LSA_DEFAULT RPC_LED_100_10
470#define RPC_LSB_DEFAULT RPC_LED_TX_RX
471
472#endif
473
Russell King073ac8f2007-09-01 21:27:18 +0100474
475/* store this information for the driver.. */
476struct smc_local {
477 /*
478 * If I have to wait until memory is available to send a
479 * packet, I will store the skbuff here, until I get the
480 * desired memory. Then, I'll send it out and free it.
481 */
482 struct sk_buff *pending_tx_skb;
483 struct tasklet_struct tx_task;
484
485 /* version/revision of the SMC91x chip */
486 int version;
487
488 /* Contains the current active transmission mode */
489 int tcr_cur_mode;
490
491 /* Contains the current active receive mode */
492 int rcr_cur_mode;
493
494 /* Contains the current active receive/phy mode */
495 int rpc_cur_mode;
496 int ctl_rfduplx;
497 int ctl_rspeed;
498
499 u32 msg_enable;
500 u32 phy_type;
501 struct mii_if_info mii;
502
503 /* work queue */
504 struct work_struct phy_configure;
505 struct net_device *dev;
506 int work_pending;
507
508 spinlock_t lock;
509
510#ifdef SMC_USE_PXA_DMA
511 /* DMA needs the physical address of the chip */
512 u_long physaddr;
513 struct device *device;
514#endif
515 void __iomem *base;
516 void __iomem *datacs;
517};
518
519
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520#ifdef SMC_USE_PXA_DMA
521/*
522 * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
523 * always happening in irq context so no need to worry about races. TX is
524 * different and probably not worth it for that reason, and not as critical
525 * as RX which can overrun memory and lose packets.
526 */
527#include <linux/dma-mapping.h>
528#include <asm/dma.h>
529#include <asm/arch/pxa-regs.h>
530
531#ifdef SMC_insl
532#undef SMC_insl
533#define SMC_insl(a, r, p, l) \
Russell King073ac8f2007-09-01 21:27:18 +0100534 smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535static inline void
Russell King073ac8f2007-09-01 21:27:18 +0100536smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 u_char *buf, int len)
538{
Russell King073ac8f2007-09-01 21:27:18 +0100539 u_long physaddr = lp->physaddr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 dma_addr_t dmabuf;
541
542 /* fallback if no DMA available */
543 if (dma == (unsigned char)-1) {
544 readsl(ioaddr + reg, buf, len);
545 return;
546 }
547
548 /* 64 bit alignment is required for memory to memory DMA */
549 if ((long)buf & 4) {
550 *((u32 *)buf) = SMC_inl(ioaddr, reg);
551 buf += 4;
552 len--;
553 }
554
555 len *= 4;
Russell King073ac8f2007-09-01 21:27:18 +0100556 dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700557 DCSR(dma) = DCSR_NODESC;
558 DTADR(dma) = dmabuf;
559 DSADR(dma) = physaddr + reg;
560 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
561 DCMD_WIDTH4 | (DCMD_LENGTH & len));
562 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
563 while (!(DCSR(dma) & DCSR_STOPSTATE))
564 cpu_relax();
565 DCSR(dma) = 0;
Russell King073ac8f2007-09-01 21:27:18 +0100566 dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567}
568#endif
569
570#ifdef SMC_insw
571#undef SMC_insw
572#define SMC_insw(a, r, p, l) \
Russell King073ac8f2007-09-01 21:27:18 +0100573 smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574static inline void
Russell King073ac8f2007-09-01 21:27:18 +0100575smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576 u_char *buf, int len)
577{
Russell King073ac8f2007-09-01 21:27:18 +0100578 u_long physaddr = lp->physaddr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 dma_addr_t dmabuf;
580
581 /* fallback if no DMA available */
582 if (dma == (unsigned char)-1) {
583 readsw(ioaddr + reg, buf, len);
584 return;
585 }
586
587 /* 64 bit alignment is required for memory to memory DMA */
588 while ((long)buf & 6) {
589 *((u16 *)buf) = SMC_inw(ioaddr, reg);
590 buf += 2;
591 len--;
592 }
593
594 len *= 2;
Russell King073ac8f2007-09-01 21:27:18 +0100595 dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700596 DCSR(dma) = DCSR_NODESC;
597 DTADR(dma) = dmabuf;
598 DSADR(dma) = physaddr + reg;
599 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
600 DCMD_WIDTH2 | (DCMD_LENGTH & len));
601 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
602 while (!(DCSR(dma) & DCSR_STOPSTATE))
603 cpu_relax();
604 DCSR(dma) = 0;
Russell King073ac8f2007-09-01 21:27:18 +0100605 dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606}
607#endif
608
609static void
David Howells7d12e782006-10-05 14:55:46 +0100610smc_pxa_dma_irq(int dma, void *dummy)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700611{
612 DCSR(dma) = 0;
613}
614#endif /* SMC_USE_PXA_DMA */
615
616
Nicolas Pitre09779c62006-03-20 11:54:27 -0500617/*
618 * Everything a particular hardware setup needs should have been defined
619 * at this point. Add stubs for the undefined cases, mainly to avoid
620 * compilation warnings since they'll be optimized away, or to prevent buggy
621 * use of them.
622 */
623
624#if ! SMC_CAN_USE_32BIT
625#define SMC_inl(ioaddr, reg) ({ BUG(); 0; })
626#define SMC_outl(x, ioaddr, reg) BUG()
627#define SMC_insl(a, r, p, l) BUG()
628#define SMC_outsl(a, r, p, l) BUG()
629#endif
630
631#if !defined(SMC_insl) || !defined(SMC_outsl)
632#define SMC_insl(a, r, p, l) BUG()
633#define SMC_outsl(a, r, p, l) BUG()
634#endif
635
636#if ! SMC_CAN_USE_16BIT
637
638/*
639 * Any 16-bit access is performed with two 8-bit accesses if the hardware
640 * can't do it directly. Most registers are 16-bit so those are mandatory.
641 */
642#define SMC_outw(x, ioaddr, reg) \
643 do { \
644 unsigned int __val16 = (x); \
645 SMC_outb( __val16, ioaddr, reg ); \
646 SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
647 } while (0)
648#define SMC_inw(ioaddr, reg) \
649 ({ \
650 unsigned int __val16; \
651 __val16 = SMC_inb( ioaddr, reg ); \
652 __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
653 __val16; \
654 })
655
656#define SMC_insw(a, r, p, l) BUG()
657#define SMC_outsw(a, r, p, l) BUG()
658
659#endif
660
661#if !defined(SMC_insw) || !defined(SMC_outsw)
662#define SMC_insw(a, r, p, l) BUG()
663#define SMC_outsw(a, r, p, l) BUG()
664#endif
665
666#if ! SMC_CAN_USE_8BIT
667#define SMC_inb(ioaddr, reg) ({ BUG(); 0; })
668#define SMC_outb(x, ioaddr, reg) BUG()
669#define SMC_insb(a, r, p, l) BUG()
670#define SMC_outsb(a, r, p, l) BUG()
671#endif
672
673#if !defined(SMC_insb) || !defined(SMC_outsb)
674#define SMC_insb(a, r, p, l) BUG()
675#define SMC_outsb(a, r, p, l) BUG()
676#endif
677
678#ifndef SMC_CAN_USE_DATACS
679#define SMC_CAN_USE_DATACS 0
680#endif
681
Linus Torvalds1da177e2005-04-16 15:20:36 -0700682#ifndef SMC_IO_SHIFT
683#define SMC_IO_SHIFT 0
684#endif
Nicolas Pitre09779c62006-03-20 11:54:27 -0500685
686#ifndef SMC_IRQ_FLAGS
Thomas Gleixner1fb9df52006-07-01 19:29:39 -0700687#define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING
Nicolas Pitre09779c62006-03-20 11:54:27 -0500688#endif
689
690#ifndef SMC_INTERRUPT_PREAMBLE
691#define SMC_INTERRUPT_PREAMBLE
692#endif
693
694
695/* Because of bank switching, the LAN91x uses only 16 I/O ports */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700696#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT)
697#define SMC_DATA_EXTENT (4)
698
699/*
700 . Bank Select Register:
701 .
702 . yyyy yyyy 0000 00xx
703 . xx = bank number
704 . yyyy yyyy = 0x33, for identification purposes.
705*/
706#define BANK_SELECT (14 << SMC_IO_SHIFT)
707
708
709// Transmit Control Register
710/* BANK 0 */
711#define TCR_REG SMC_REG(0x0000, 0)
712#define TCR_ENABLE 0x0001 // When 1 we can transmit
713#define TCR_LOOP 0x0002 // Controls output pin LBK
714#define TCR_FORCOL 0x0004 // When 1 will force a collision
715#define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0
716#define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames
717#define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier
718#define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation
719#define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error
720#define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback
721#define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode
722
723#define TCR_CLEAR 0 /* do NOTHING */
724/* the default settings for the TCR register : */
725#define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN)
726
727
728// EPH Status Register
729/* BANK 0 */
730#define EPH_STATUS_REG SMC_REG(0x0002, 0)
731#define ES_TX_SUC 0x0001 // Last TX was successful
732#define ES_SNGL_COL 0x0002 // Single collision detected for last tx
733#define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx
734#define ES_LTX_MULT 0x0008 // Last tx was a multicast
735#define ES_16COL 0x0010 // 16 Collisions Reached
736#define ES_SQET 0x0020 // Signal Quality Error Test
737#define ES_LTXBRD 0x0040 // Last tx was a broadcast
738#define ES_TXDEFR 0x0080 // Transmit Deferred
739#define ES_LATCOL 0x0200 // Late collision detected on last tx
740#define ES_LOSTCARR 0x0400 // Lost Carrier Sense
741#define ES_EXC_DEF 0x0800 // Excessive Deferral
742#define ES_CTR_ROL 0x1000 // Counter Roll Over indication
743#define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin
744#define ES_TXUNRN 0x8000 // Tx Underrun
745
746
747// Receive Control Register
748/* BANK 0 */
749#define RCR_REG SMC_REG(0x0004, 0)
750#define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted
751#define RCR_PRMS 0x0002 // Enable promiscuous mode
752#define RCR_ALMUL 0x0004 // When set accepts all multicast frames
753#define RCR_RXEN 0x0100 // IFF this is set, we can receive packets
754#define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets
755#define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision
756#define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier
757#define RCR_SOFTRST 0x8000 // resets the chip
758
759/* the normal settings for the RCR register : */
760#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
761#define RCR_CLEAR 0x0 // set it to a base state
762
763
764// Counter Register
765/* BANK 0 */
766#define COUNTER_REG SMC_REG(0x0006, 0)
767
768
769// Memory Information Register
770/* BANK 0 */
771#define MIR_REG SMC_REG(0x0008, 0)
772
773
774// Receive/Phy Control Register
775/* BANK 0 */
776#define RPC_REG SMC_REG(0x000A, 0)
777#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode.
778#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode
779#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
780#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
781#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
782#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
783#define RPC_LED_RES (0x01) // LED = Reserved
784#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
785#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
786#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
787#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
788#define RPC_LED_TX (0x06) // LED = TX packet occurred
789#define RPC_LED_RX (0x07) // LED = RX packet occurred
790
791#ifndef RPC_LSA_DEFAULT
792#define RPC_LSA_DEFAULT RPC_LED_100
793#endif
794#ifndef RPC_LSB_DEFAULT
795#define RPC_LSB_DEFAULT RPC_LED_FD
796#endif
797
798#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
799
800
801/* Bank 0 0x0C is reserved */
802
803// Bank Select Register
804/* All Banks */
805#define BSR_REG 0x000E
806
807
808// Configuration Reg
809/* BANK 1 */
810#define CONFIG_REG SMC_REG(0x0000, 1)
811#define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy
812#define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL
813#define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus
814#define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode.
815
816// Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low
817#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
818
819
820// Base Address Register
821/* BANK 1 */
822#define BASE_REG SMC_REG(0x0002, 1)
823
824
825// Individual Address Registers
826/* BANK 1 */
827#define ADDR0_REG SMC_REG(0x0004, 1)
828#define ADDR1_REG SMC_REG(0x0006, 1)
829#define ADDR2_REG SMC_REG(0x0008, 1)
830
831
832// General Purpose Register
833/* BANK 1 */
834#define GP_REG SMC_REG(0x000A, 1)
835
836
837// Control Register
838/* BANK 1 */
839#define CTL_REG SMC_REG(0x000C, 1)
840#define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received
841#define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
842#define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt
843#define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt
844#define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt
845#define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store
846#define CTL_RELOAD 0x0002 // When set reads EEPROM into registers
847#define CTL_STORE 0x0001 // When set stores registers into EEPROM
848
849
850// MMU Command Register
851/* BANK 2 */
852#define MMU_CMD_REG SMC_REG(0x0000, 2)
853#define MC_BUSY 1 // When 1 the last release has not completed
854#define MC_NOP (0<<5) // No Op
855#define MC_ALLOC (1<<5) // OR with number of 256 byte packets
856#define MC_RESET (2<<5) // Reset MMU to initial state
857#define MC_REMOVE (3<<5) // Remove the current rx packet
858#define MC_RELEASE (4<<5) // Remove and release the current rx packet
859#define MC_FREEPKT (5<<5) // Release packet in PNR register
860#define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit
861#define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs
862
863
864// Packet Number Register
865/* BANK 2 */
866#define PN_REG SMC_REG(0x0002, 2)
867
868
869// Allocation Result Register
870/* BANK 2 */
871#define AR_REG SMC_REG(0x0003, 2)
872#define AR_FAILED 0x80 // Alocation Failed
873
874
875// TX FIFO Ports Register
876/* BANK 2 */
877#define TXFIFO_REG SMC_REG(0x0004, 2)
878#define TXFIFO_TEMPTY 0x80 // TX FIFO Empty
879
880// RX FIFO Ports Register
881/* BANK 2 */
882#define RXFIFO_REG SMC_REG(0x0005, 2)
883#define RXFIFO_REMPTY 0x80 // RX FIFO Empty
884
885#define FIFO_REG SMC_REG(0x0004, 2)
886
887// Pointer Register
888/* BANK 2 */
889#define PTR_REG SMC_REG(0x0006, 2)
890#define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area
891#define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access
892#define PTR_READ 0x2000 // When 1 the operation is a read
893
894
895// Data Register
896/* BANK 2 */
897#define DATA_REG SMC_REG(0x0008, 2)
898
899
900// Interrupt Status/Acknowledge Register
901/* BANK 2 */
902#define INT_REG SMC_REG(0x000C, 2)
903
904
905// Interrupt Mask Register
906/* BANK 2 */
907#define IM_REG SMC_REG(0x000D, 2)
908#define IM_MDINT 0x80 // PHY MI Register 18 Interrupt
909#define IM_ERCV_INT 0x40 // Early Receive Interrupt
910#define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section
911#define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns
912#define IM_ALLOC_INT 0x08 // Set when allocation request is completed
913#define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty
914#define IM_TX_INT 0x02 // Transmit Interrupt
915#define IM_RCV_INT 0x01 // Receive Interrupt
916
917
918// Multicast Table Registers
919/* BANK 3 */
920#define MCAST_REG1 SMC_REG(0x0000, 3)
921#define MCAST_REG2 SMC_REG(0x0002, 3)
922#define MCAST_REG3 SMC_REG(0x0004, 3)
923#define MCAST_REG4 SMC_REG(0x0006, 3)
924
925
926// Management Interface Register (MII)
927/* BANK 3 */
928#define MII_REG SMC_REG(0x0008, 3)
929#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup
930#define MII_MDOE 0x0008 // MII Output Enable
931#define MII_MCLK 0x0004 // MII Clock, pin MDCLK
932#define MII_MDI 0x0002 // MII Input, pin MDI
933#define MII_MDO 0x0001 // MII Output, pin MDO
934
935
936// Revision Register
937/* BANK 3 */
938/* ( hi: chip id low: rev # ) */
939#define REV_REG SMC_REG(0x000A, 3)
940
941
942// Early RCV Register
943/* BANK 3 */
944/* this is NOT on SMC9192 */
945#define ERCV_REG SMC_REG(0x000C, 3)
946#define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
947#define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask
948
949
950// External Register
951/* BANK 7 */
952#define EXT_REG SMC_REG(0x0000, 7)
953
954
955#define CHIP_9192 3
956#define CHIP_9194 4
957#define CHIP_9195 5
958#define CHIP_9196 6
959#define CHIP_91100 7
960#define CHIP_91100FD 8
961#define CHIP_91111FD 9
962
963static const char * chip_ids[ 16 ] = {
964 NULL, NULL, NULL,
965 /* 3 */ "SMC91C90/91C92",
966 /* 4 */ "SMC91C94",
967 /* 5 */ "SMC91C95",
968 /* 6 */ "SMC91C96",
969 /* 7 */ "SMC91C100",
970 /* 8 */ "SMC91C100FD",
971 /* 9 */ "SMC91C11xFD",
972 NULL, NULL, NULL,
973 NULL, NULL, NULL};
974
975
976/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700977 . Receive status bits
978*/
979#define RS_ALGNERR 0x8000
980#define RS_BRODCAST 0x4000
981#define RS_BADCRC 0x2000
982#define RS_ODDFRAME 0x1000
983#define RS_TOOLONG 0x0800
984#define RS_TOOSHORT 0x0400
985#define RS_MULTICAST 0x0001
986#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
987
988
989/*
990 * PHY IDs
991 * LAN83C183 == LAN91C111 Internal PHY
992 */
993#define PHY_LAN83C183 0x0016f840
994#define PHY_LAN83C180 0x02821c50
995
996/*
997 * PHY Register Addresses (LAN91C111 Internal PHY)
998 *
999 * Generic PHY registers can be found in <linux/mii.h>
1000 *
1001 * These phy registers are specific to our on-board phy.
1002 */
1003
1004// PHY Configuration Register 1
1005#define PHY_CFG1_REG 0x10
1006#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled
1007#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled
1008#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down
1009#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler
1010#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable
1011#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled
1012#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm)
1013#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db
1014#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust
1015#define PHY_CFG1_TLVL_MASK 0x003C
1016#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time
1017
1018
1019// PHY Configuration Register 2
1020#define PHY_CFG2_REG 0x11
1021#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled
1022#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled
1023#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt)
1024#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo
1025
1026// PHY Status Output (and Interrupt status) Register
1027#define PHY_INT_REG 0x12 // Status Output (Interrupt Status)
1028#define PHY_INT_INT 0x8000 // 1=bits have changed since last read
1029#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected
1030#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync
1031#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx
1032#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx
1033#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx
1034#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected
1035#define PHY_INT_JAB 0x0100 // 1=Jabber detected
1036#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode
1037#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex
1038
1039// PHY Interrupt/Status Mask Register
1040#define PHY_MASK_REG 0x13 // Interrupt Mask
1041// Uses the same bit definitions as PHY_INT_REG
1042
1043
1044/*
1045 * SMC91C96 ethernet config and status registers.
1046 * These are in the "attribute" space.
1047 */
1048#define ECOR 0x8000
1049#define ECOR_RESET 0x80
1050#define ECOR_LEVEL_IRQ 0x40
1051#define ECOR_WR_ATTRIB 0x04
1052#define ECOR_ENABLE 0x01
1053
1054#define ECSR 0x8002
1055#define ECSR_IOIS8 0x20
1056#define ECSR_PWRDWN 0x04
1057#define ECSR_INT 0x02
1058
1059#define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT)
1060
1061
1062/*
1063 * Macros to abstract register access according to the data bus
1064 * capabilities. Please use those and not the in/out primitives.
1065 * Note: the following macros do *not* select the bank -- this must
1066 * be done separately as needed in the main code. The SMC_REG() macro
1067 * only uses the bank argument for debugging purposes (when enabled).
Nicolas Pitre09779c62006-03-20 11:54:27 -05001068 *
1069 * Note: despite inline functions being safer, everything leading to this
1070 * should preferably be macros to let BUG() display the line number in
1071 * the core source code since we're interested in the top call site
1072 * not in any inline function location.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 */
1074
1075#if SMC_DEBUG > 0
1076#define SMC_REG(reg, bank) \
1077 ({ \
1078 int __b = SMC_CURRENT_BANK(); \
1079 if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \
1080 printk( "%s: bank reg screwed (0x%04x)\n", \
1081 CARDNAME, __b ); \
1082 BUG(); \
1083 } \
1084 reg<<SMC_IO_SHIFT; \
1085 })
1086#else
1087#define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT)
1088#endif
1089
Nicolas Pitre09779c62006-03-20 11:54:27 -05001090/*
1091 * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
1092 * aligned to a 32 bit boundary. I tell you that does exist!
1093 * Fortunately the affected register accesses can be easily worked around
1094 * since we can write zeroes to the preceeding 16 bits without adverse
1095 * effects and use a 32-bit access.
1096 *
1097 * Enforce it on any 32-bit capable setup for now.
1098 */
1099#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT
1100
1101#define SMC_GET_PN() \
1102 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \
1103 : (SMC_inw(ioaddr, PN_REG) & 0xFF) )
1104
1105#define SMC_SET_PN(x) \
1106 do { \
1107 if (SMC_MUST_ALIGN_WRITE) \
1108 SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \
1109 else if (SMC_CAN_USE_8BIT) \
1110 SMC_outb(x, ioaddr, PN_REG); \
1111 else \
1112 SMC_outw(x, ioaddr, PN_REG); \
1113 } while (0)
1114
1115#define SMC_GET_AR() \
1116 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \
1117 : (SMC_inw(ioaddr, PN_REG) >> 8) )
1118
1119#define SMC_GET_TXFIFO() \
1120 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \
1121 : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) )
1122
1123#define SMC_GET_RXFIFO() \
1124 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \
1125 : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) )
1126
1127#define SMC_GET_INT() \
1128 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \
1129 : (SMC_inw(ioaddr, INT_REG) & 0xFF) )
1130
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131#define SMC_ACK_INT(x) \
1132 do { \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001133 if (SMC_CAN_USE_8BIT) \
1134 SMC_outb(x, ioaddr, INT_REG); \
1135 else { \
1136 unsigned long __flags; \
1137 int __mask; \
1138 local_irq_save(__flags); \
1139 __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \
1140 SMC_outw( __mask | (x), ioaddr, INT_REG ); \
1141 local_irq_restore(__flags); \
1142 } \
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143 } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001144
Nicolas Pitre09779c62006-03-20 11:54:27 -05001145#define SMC_GET_INT_MASK() \
1146 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \
1147 : (SMC_inw( ioaddr, INT_REG ) >> 8) )
1148
1149#define SMC_SET_INT_MASK(x) \
1150 do { \
1151 if (SMC_CAN_USE_8BIT) \
1152 SMC_outb(x, ioaddr, IM_REG); \
1153 else \
1154 SMC_outw((x) << 8, ioaddr, INT_REG); \
1155 } while (0)
1156
1157#define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT)
1158
1159#define SMC_SELECT_BANK(x) \
1160 do { \
1161 if (SMC_MUST_ALIGN_WRITE) \
1162 SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
1163 else \
1164 SMC_outw(x, ioaddr, BANK_SELECT); \
1165 } while (0)
1166
1167#define SMC_GET_BASE() SMC_inw(ioaddr, BASE_REG)
1168
1169#define SMC_SET_BASE(x) SMC_outw(x, ioaddr, BASE_REG)
1170
1171#define SMC_GET_CONFIG() SMC_inw(ioaddr, CONFIG_REG)
1172
1173#define SMC_SET_CONFIG(x) SMC_outw(x, ioaddr, CONFIG_REG)
1174
1175#define SMC_GET_COUNTER() SMC_inw(ioaddr, COUNTER_REG)
1176
1177#define SMC_GET_CTL() SMC_inw(ioaddr, CTL_REG)
1178
1179#define SMC_SET_CTL(x) SMC_outw(x, ioaddr, CTL_REG)
1180
1181#define SMC_GET_MII() SMC_inw(ioaddr, MII_REG)
1182
1183#define SMC_SET_MII(x) SMC_outw(x, ioaddr, MII_REG)
1184
1185#define SMC_GET_MIR() SMC_inw(ioaddr, MIR_REG)
1186
1187#define SMC_SET_MIR(x) SMC_outw(x, ioaddr, MIR_REG)
1188
1189#define SMC_GET_MMU_CMD() SMC_inw(ioaddr, MMU_CMD_REG)
1190
1191#define SMC_SET_MMU_CMD(x) SMC_outw(x, ioaddr, MMU_CMD_REG)
1192
1193#define SMC_GET_FIFO() SMC_inw(ioaddr, FIFO_REG)
1194
1195#define SMC_GET_PTR() SMC_inw(ioaddr, PTR_REG)
1196
1197#define SMC_SET_PTR(x) \
1198 do { \
1199 if (SMC_MUST_ALIGN_WRITE) \
1200 SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2)); \
1201 else \
1202 SMC_outw(x, ioaddr, PTR_REG); \
1203 } while (0)
1204
1205#define SMC_GET_EPH_STATUS() SMC_inw(ioaddr, EPH_STATUS_REG)
1206
1207#define SMC_GET_RCR() SMC_inw(ioaddr, RCR_REG)
1208
1209#define SMC_SET_RCR(x) SMC_outw(x, ioaddr, RCR_REG)
1210
1211#define SMC_GET_REV() SMC_inw(ioaddr, REV_REG)
1212
1213#define SMC_GET_RPC() SMC_inw(ioaddr, RPC_REG)
1214
1215#define SMC_SET_RPC(x) \
1216 do { \
1217 if (SMC_MUST_ALIGN_WRITE) \
1218 SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0)); \
1219 else \
1220 SMC_outw(x, ioaddr, RPC_REG); \
1221 } while (0)
1222
1223#define SMC_GET_TCR() SMC_inw(ioaddr, TCR_REG)
1224
1225#define SMC_SET_TCR(x) SMC_outw(x, ioaddr, TCR_REG)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001226
1227#ifndef SMC_GET_MAC_ADDR
1228#define SMC_GET_MAC_ADDR(addr) \
1229 do { \
1230 unsigned int __v; \
1231 __v = SMC_inw( ioaddr, ADDR0_REG ); \
1232 addr[0] = __v; addr[1] = __v >> 8; \
1233 __v = SMC_inw( ioaddr, ADDR1_REG ); \
1234 addr[2] = __v; addr[3] = __v >> 8; \
1235 __v = SMC_inw( ioaddr, ADDR2_REG ); \
1236 addr[4] = __v; addr[5] = __v >> 8; \
1237 } while (0)
1238#endif
1239
1240#define SMC_SET_MAC_ADDR(addr) \
1241 do { \
1242 SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \
1243 SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \
1244 SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \
1245 } while (0)
1246
1247#define SMC_SET_MCAST(x) \
1248 do { \
1249 const unsigned char *mt = (x); \
1250 SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \
1251 SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \
1252 SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \
1253 SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \
1254 } while (0)
1255
Linus Torvalds1da177e2005-04-16 15:20:36 -07001256#define SMC_PUT_PKT_HDR(status, length) \
1257 do { \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001258 if (SMC_CAN_USE_32BIT) \
1259 SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \
1260 else { \
1261 SMC_outw(status, ioaddr, DATA_REG); \
1262 SMC_outw(length, ioaddr, DATA_REG); \
1263 } \
Linus Torvalds1da177e2005-04-16 15:20:36 -07001264 } while (0)
Nicolas Pitre09779c62006-03-20 11:54:27 -05001265
Linus Torvalds1da177e2005-04-16 15:20:36 -07001266#define SMC_GET_PKT_HDR(status, length) \
1267 do { \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001268 if (SMC_CAN_USE_32BIT) { \
1269 unsigned int __val = SMC_inl(ioaddr, DATA_REG); \
1270 (status) = __val & 0xffff; \
1271 (length) = __val >> 16; \
1272 } else { \
1273 (status) = SMC_inw(ioaddr, DATA_REG); \
1274 (length) = SMC_inw(ioaddr, DATA_REG); \
Linus Torvalds1da177e2005-04-16 15:20:36 -07001275 } \
1276 } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277
Linus Torvalds1da177e2005-04-16 15:20:36 -07001278#define SMC_PUSH_DATA(p, l) \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001279 do { \
1280 if (SMC_CAN_USE_32BIT) { \
1281 void *__ptr = (p); \
1282 int __len = (l); \
Al Virofbd81972006-05-30 23:58:25 -04001283 void __iomem *__ioaddr = ioaddr; \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001284 if (__len >= 2 && (unsigned long)__ptr & 2) { \
1285 __len -= 2; \
1286 SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \
1287 __ptr += 2; \
1288 } \
1289 if (SMC_CAN_USE_DATACS && lp->datacs) \
1290 __ioaddr = lp->datacs; \
1291 SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \
1292 if (__len & 2) { \
1293 __ptr += (__len & ~3); \
1294 SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \
1295 } \
1296 } else if (SMC_CAN_USE_16BIT) \
1297 SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \
1298 else if (SMC_CAN_USE_8BIT) \
1299 SMC_outsb(ioaddr, DATA_REG, p, l); \
1300 } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001301
1302#define SMC_PULL_DATA(p, l) \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001303 do { \
1304 if (SMC_CAN_USE_32BIT) { \
1305 void *__ptr = (p); \
1306 int __len = (l); \
Al Virofbd81972006-05-30 23:58:25 -04001307 void __iomem *__ioaddr = ioaddr; \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001308 if ((unsigned long)__ptr & 2) { \
1309 /* \
1310 * We want 32bit alignment here. \
1311 * Since some buses perform a full \
1312 * 32bit fetch even for 16bit data \
1313 * we can't use SMC_inw() here. \
1314 * Back both source (on-chip) and \
1315 * destination pointers of 2 bytes. \
1316 * This is possible since the call to \
1317 * SMC_GET_PKT_HDR() already advanced \
1318 * the source pointer of 4 bytes, and \
1319 * the skb_reserve(skb, 2) advanced \
1320 * the destination pointer of 2 bytes. \
1321 */ \
1322 __ptr -= 2; \
1323 __len += 2; \
1324 SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
1325 } \
1326 if (SMC_CAN_USE_DATACS && lp->datacs) \
1327 __ioaddr = lp->datacs; \
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328 __len += 2; \
Nicolas Pitre09779c62006-03-20 11:54:27 -05001329 SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \
1330 } else if (SMC_CAN_USE_16BIT) \
1331 SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \
1332 else if (SMC_CAN_USE_8BIT) \
1333 SMC_insb(ioaddr, DATA_REG, p, l); \
1334 } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001335
1336#endif /* _SMC91X_H_ */