Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 95f1dc08c6f98a62b5dae6ed86fa04f40fb6b34f / . / drivers / regulator / Kconfig
blob: 65b7d5b1bb395f3e0f0002625f9825aae7786b60 [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame^]67config REGULATOR_88PM800
68 tristate "Marvell 88PM800 Power regulators"
69 depends on MFD_88PM800=y
70 help
71 This driver supports Marvell 88PM800 voltage regulator chips.
72 It delivers digitally programmable output,
73 the voltage is programmed via I2C interface.
74 It's suitable to support PXA988 chips to control VCC_MAIN and
75 various voltages.
76
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]77config REGULATOR_88PM8607
78 bool "Marvell 88PM8607 Power regulators"
79 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]80 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]81 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]82
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]83config REGULATOR_AD5398
84 tristate "Analog Devices AD5398/AD5821 regulators"
85 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]86 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]87 This driver supports AD5398 and AD5821 current regulator chips.
88 If building into module, its name is ad5398.ko.
89
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]90config REGULATOR_ANATOP
91 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
92 depends on MFD_SYSCON
93 help
94 Say y here to support Freescale i.MX on-chip ANATOP LDOs
95 regulators. It is recommended that this option be
96 enabled on i.MX6 platform.
97
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]98config REGULATOR_AAT2870
99 tristate "AnalogicTech AAT2870 Regulators"
100 depends on MFD_AAT2870_CORE
101 help
102 If you have a AnalogicTech AAT2870 say Y to enable the
103 regulator driver.
104
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]105config REGULATOR_AB3100
106 tristate "ST-Ericsson AB3100 Regulator functions"
107 depends on AB3100_CORE
108 default y if AB3100_CORE
109 help
110 These regulators correspond to functionality in the
111 AB3100 analog baseband dealing with power regulators
112 for the system.
113
114config REGULATOR_AB8500
115 bool "ST-Ericsson AB8500 Power Regulators"
116 depends on AB8500_CORE
117 help
118 This driver supports the regulators found on the ST-Ericsson mixed
119 signal AB8500 PMIC
120
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]121config REGULATOR_ARIZONA
122 tristate "Wolfson Arizona class devices"
123 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]124 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]125 help
126 Support for the regulators found on Wolfson Arizona class
127 devices.
128
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]129config REGULATOR_AS3711
130 tristate "AS3711 PMIC"
131 depends on MFD_AS3711
132 help
133 This driver provides support for the voltage regulators on the
134 AS3711 PMIC
135
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]136config REGULATOR_DA903X
137 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
138 depends on PMIC_DA903X
139 help
140 Say y here to support the BUCKs and LDOs regulators found on
141 Dialog Semiconductor DA9030/DA9034 PMIC.
142
143config REGULATOR_DA9052
144 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
145 depends on PMIC_DA9052
146 help
147 This driver supports the voltage regulators of DA9052-BC and
148 DA9053-AA/Bx PMIC.
149
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]150config REGULATOR_DA9055
151 tristate "Dialog Semiconductor DA9055 regulators"
152 depends on MFD_DA9055
153 help
154 Say y here to support the BUCKs and LDOs regulators found on
155 Dialog Semiconductor DA9055 PMIC.
156
157 This driver can also be built as a module. If so, the module
158 will be called da9055-regulator.
159
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]160config REGULATOR_DBX500_PRCMU
161 bool
162
163config REGULATOR_DB8500_PRCMU
164 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
165 depends on MFD_DB8500_PRCMU
166 select REGULATOR_DBX500_PRCMU
167 help
168 This driver supports the voltage domain regulators controlled by the
169 DB8500 PRCMU
170
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]171config REGULATOR_FAN53555
172 tristate "Fairchild FAN53555 Regulator"
173 depends on I2C
174 select REGMAP_I2C
175 help
176 This driver supports Fairchild FAN53555 Digitally Programmable
177 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
178 regulator that delivers a digitally programmable output from an
179 input voltage supply of 2.5V to 5.5V. The output voltage is
180 programmed through an I2C interface.
181
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]182config REGULATOR_GPIO
183 tristate "GPIO regulator support"
184 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]185 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]186 This driver provides support for regulators that can be
187 controlled via gpios.
188 It is capable of supporting current and voltage regulators
189 and the platform has to provide a mapping of GPIO-states
190 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]191
192config REGULATOR_ISL6271A
193 tristate "Intersil ISL6271A Power regulator"
194 depends on I2C
195 help
196 This driver supports ISL6271A voltage regulator chip.
197
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]198config REGULATOR_LP3971
199 tristate "National Semiconductors LP3971 PMIC regulator driver"
200 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]201 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]202 Say Y here to support the voltage regulators and convertors
203 on National Semiconductors LP3971 PMIC
204
205config REGULATOR_LP3972
206 tristate "National Semiconductors LP3972 PMIC regulator driver"
207 depends on I2C
208 help
209 Say Y here to support the voltage regulators and convertors
210 on National Semiconductors LP3972 PMIC
211
212config REGULATOR_LP872X
213 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
214 depends on I2C=y
215 select REGMAP_I2C
216 help
217 This driver supports LP8720/LP8725 PMIC
218
219config REGULATOR_LP8755
220 tristate "TI LP8755 High Performance PMU driver"
221 depends on I2C
222 select REGMAP_I2C
223 help
224 This driver supports LP8755 High Performance PMU driver. This
225 chip contains six step-down DC/DC converters which can support
226 9 mode multiphase configuration.
227
228config REGULATOR_LP8788
229 bool "TI LP8788 Power Regulators"
230 depends on MFD_LP8788
231 help
232 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]233
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]234config REGULATOR_MAX1586
235 tristate "Maxim 1586/1587 voltage regulator"
236 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]237 help
238 This driver controls a Maxim 1586 or 1587 voltage output
239 regulator via I2C bus. The provided regulator is suitable
240 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
241
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]242config REGULATOR_MAX8649
243 tristate "Maxim 8649 voltage regulator"
244 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]245 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]246 help
247 This driver controls a Maxim 8649 voltage output regulator via
248 I2C bus.
249
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]250config REGULATOR_MAX8660
251 tristate "Maxim 8660/8661 voltage regulator"
252 depends on I2C
253 help
254 This driver controls a Maxim 8660/8661 voltage output
255 regulator via I2C bus.
256
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]257config REGULATOR_MAX8907
258 tristate "Maxim 8907 voltage regulator"
259 depends on MFD_MAX8907
260 help
261 This driver controls a Maxim 8907 voltage output regulator
262 via I2C bus. The provided regulator is suitable for Tegra
263 chip to control Step-Down DC-DC and LDOs.
264
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]265config REGULATOR_MAX8925
266 tristate "Maxim MAX8925 Power Management IC"
267 depends on MFD_MAX8925
268 help
269 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
270
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]271config REGULATOR_MAX8952
272 tristate "Maxim MAX8952 Power Management IC"
273 depends on I2C
274 help
275 This driver controls a Maxim 8952 voltage output regulator
276 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
277 modes ranging from 0.77V to 1.40V by 0.01V steps.
278
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]279config REGULATOR_MAX8973
280 tristate "Maxim MAX8973 voltage regulator "
281 depends on I2C
282 select REGMAP_I2C
283 help
284 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
285 switching regulator delievers up to 9A of output current. Each
286 phase operates at a 2MHz fixed frequency with a 120 deg shift
287 from the adjacent phase, allowing the use of small magnetic component.
288
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]289config REGULATOR_MAX8997
290 tristate "Maxim 8997/8966 regulator"
291 depends on MFD_MAX8997
292 help
293 This driver controls a Maxim 8997/8966 regulator
294 via I2C bus. The provided regulator is suitable for S5PC110,
295 S5PV210, and Exynos-4 chips to control VCC_CORE and
296 VCC_USIM voltages.
297
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]298config REGULATOR_MAX8998
299 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]300 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]301 help
302 This driver controls a Maxim 8998 voltage output regulator
303 via I2C bus. The provided regulator is suitable for S3C6410
304 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
305
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]306config REGULATOR_MAX77686
307 tristate "Maxim 77686 regulator"
308 depends on MFD_MAX77686
309 help
310 This driver controls a Maxim 77686 regulator
311 via I2C bus. The provided regulator is suitable for
312 Exynos-4 chips to control VARM and VINT voltages.
313
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]314config REGULATOR_MAX77693
315 tristate "Maxim MAX77693 regulator"
316 depends on MFD_MAX77693
317 help
318 This driver controls a Maxim 77693 regulator via I2C bus.
319 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
320 and one current regulator 'CHARGER'. This is suitable for
321 Exynos-4x12 chips.
322
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]323config REGULATOR_MC13XXX_CORE
324 tristate
325
326config REGULATOR_MC13783
327 tristate "Freescale MC13783 regulator driver"
328 depends on MFD_MC13783
329 select REGULATOR_MC13XXX_CORE
330 help
331 Say y here to support the regulators found on the Freescale MC13783
332 PMIC.
333
334config REGULATOR_MC13892
335 tristate "Freescale MC13892 regulator driver"
336 depends on MFD_MC13XXX
337 select REGULATOR_MC13XXX_CORE
338 help
339 Say y here to support the regulators found on the Freescale MC13892
340 PMIC.
341
342config REGULATOR_PALMAS
343 tristate "TI Palmas PMIC Regulators"
344 depends on MFD_PALMAS
345 help
346 If you wish to control the regulators on the Palmas series of
347 chips say Y here. This will enable support for all the software
348 controllable SMPS/LDO regulators.
349
350 The regulators available on Palmas series chips vary depending
351 on the muxing. This is handled automatically in the driver by
352 reading the mux info from OTP.
353
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]354config REGULATOR_PCAP
355 tristate "Motorola PCAP2 regulator driver"
356 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]357 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]358 This driver provides support for the voltage regulators of the
359 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]360
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]361config REGULATOR_PCF50633
362 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]363 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]364 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]365 Say Y here to support the voltage regulators and convertors
366 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]367
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]368config REGULATOR_RC5T583
369 tristate "RICOH RC5T583 Power regulators"
370 depends on MFD_RC5T583
371 help
372 Select this option to enable the power regulator of RICOH
373 PMIC RC5T583.
374 This driver supports the control of different power rails of device
375 through regulator interface. The device supports multiple DCDC/LDO
376 outputs which can be controlled by i2c communication.
377
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]378config REGULATOR_S2MPS11
379 tristate "Samsung S2MPS11 voltage regulator"
380 depends on MFD_SEC_CORE
381 help
382 This driver supports a Samsung S2MPS11 voltage output regulator
383 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
384 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
385
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]386config REGULATOR_S5M8767
387 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]388 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]389 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]390 This driver supports a Samsung S5M8767A voltage output regulator
391 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
392 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]393
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]394config REGULATOR_TI_ABB
395 bool "TI Adaptive Body Bias on-chip LDO"
396 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]397 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]398 Select this option to support Texas Instruments' on-chip Adaptive Body
399 Bias (ABB) LDO regulators. It is recommended that this option be
400 enabled on required TI SoC. Certain Operating Performance Points
401 on TI SoCs may be unstable without enabling this as it provides
402 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]403
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]404config REGULATOR_TPS51632
405 tristate "TI TPS51632 Power Regulator"
406 depends on I2C
407 select REGMAP_I2C
408 help
409 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]410 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]411 with Serial VID control and DVFS.
412 The voltage output can be configure through I2C interface or PWM
413 interface.
414
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]415config REGULATOR_TPS6105X
416 tristate "TI TPS6105X Power regulators"
417 depends on TPS6105X
418 default y if TPS6105X
419 help
420 This driver supports TPS61050/TPS61052 voltage regulator chips.
421 It is a single boost converter primarily for white LEDs and
422 audio amplifiers.
423
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]424config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]425 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]426 depends on I2C
427 select REGMAP_I2C
428 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]429 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]430 regulator is meant for processor core supply. This chip is
431 high-frequency synchronous step down dc-dc converter optimized
432 for battery-powered portable applications.
433
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]434config REGULATOR_TPS65023
435 tristate "TI TPS65023 Power regulators"
436 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]437 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]438 help
439 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
440 three step-down converters and two general-purpose LDO voltage regulators.
441 It supports TI's software based Class-2 SmartReflex implementation.
442
443config REGULATOR_TPS6507X
444 tristate "TI TPS6507X Power regulators"
445 depends on I2C
446 help
447 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
448 three step-down converters and two general-purpose LDO voltage regulators.
449 It supports TI's software based Class-2 SmartReflex implementation.
450
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]451config REGULATOR_TPS65090
452 tristate "TI TPS65090 Power regulator"
453 depends on MFD_TPS65090
454 help
455 This driver provides support for the voltage regulators on the
456 TI TPS65090 PMIC.
457
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]458config REGULATOR_TPS65217
459 tristate "TI TPS65217 Power regulators"
460 depends on MFD_TPS65217
461 help
462 This driver supports TPS65217 voltage regulator chips. TPS65217
463 provides three step-down converters and four general-purpose LDO
464 voltage regulators. It supports software based voltage control
465 for different voltage domains
466
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]467config REGULATOR_TPS6524X
468 tristate "TI TPS6524X Power regulators"
469 depends on SPI
470 help
471 This driver supports TPS6524X voltage regulator chips. TPS6524X
472 provides three step-down converters and two general-purpose LDO
473 voltage regulators. This device is interfaced using a customized
474 serial interface currently supported on the sequencer serial
475 port controller.
476
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]477config REGULATOR_TPS6586X
478 tristate "TI TPS6586X Power regulators"
479 depends on MFD_TPS6586X
480 help
481 This driver supports TPS6586X voltage regulator chips.
482
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]483config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]484 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]485 depends on MFD_TPS65910
486 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]487 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]488
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]489config REGULATOR_TPS65912
490 tristate "TI TPS65912 Power regulator"
491 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]492 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]493 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]494
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]495config REGULATOR_TPS80031
496 tristate "TI TPS80031/TPS80032 power regualtor driver"
497 depends on MFD_TPS80031
498 help
499 TPS80031/ TPS80032 Fully Integrated Power Management with Power
500 Path and Battery Charger. It has 5 configurable step-down
501 converters, 11 general purpose LDOs, VBUS generator and digital
502 output to control regulators.
503
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]504config REGULATOR_TWL4030
505 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
506 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]507 help
508 This driver supports the voltage regulators provided by
509 this family of companion chips.
510
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]511config REGULATOR_VEXPRESS
512 tristate "Versatile Express regulators"
513 depends on VEXPRESS_CONFIG
514 help
515 This driver provides support for voltage regulators available
516 on the ARM Ltd's Versatile Express platform.
517
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]518config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]519 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]520 depends on MFD_WM831X
521 help
522 Support the voltage and current regulators of the WM831x series
523 of PMIC devices.
524
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]525config REGULATOR_WM8350
526 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
527 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]528 help
529 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]530 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]531
532config REGULATOR_WM8400
533 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
534 depends on MFD_WM8400
535 help
536 This driver provides support for the voltage regulators of the
537 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]538
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]539config REGULATOR_WM8994
540 tristate "Wolfson Microelectronics WM8994 CODEC"
541 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]542 help
543 This driver provides support for the voltage regulators on the
544 WM8994 CODEC.
545
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]546endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]547