sshd.c

/*
 * Author: Tatu Ylonen <ylo@cs.hut.fi>
 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
 *                    All rights reserved
 * This program is the ssh daemon.  It listens for connections from clients,
 * and performs authentication, executes use commands or shell, and forwards
 * information to/from the application to the user client over an encrypted
 * connection.  This can also handle forwarding of X11, TCP/IP, and
 * authentication agent connections.
 *
 * As far as I am concerned, the code I have written for this software
 * can be used freely for any purpose.  Any derived versions of this
 * software must be clearly marked as such, and if the derived work is
 * incompatible with the protocol description in the RFC file, it must be
 * called by a name other than "ssh" or "Secure Shell".
 *
 * SSH2 implementation:
 * Privilege Separation:
 *
 * Copyright (c) 2000, 2001, 2002 Markus Friedl.  All rights reserved.
 * Copyright (c) 2002 Niels Provos.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "includes.h"

#include <sys/types.h>
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#include <sys/ioctl.h>
#include <sys/wait.h>

#ifdef HAVE_PATHS_H
#include <paths.h>
#endif
#include <signal.h>

#include <openssl/dh.h>
#include <openssl/bn.h>
#include <openssl/md5.h>
#include <openssl/rand.h>
#ifdef HAVE_SECUREWARE
#include <sys/security.h>
#include <prot.h>
#endif

#include "ssh.h"
#include "ssh1.h"
#include "ssh2.h"
#include "xmalloc.h"
#include "rsa.h"
#include "sshpty.h"
#include "packet.h"
#include "log.h"
#include "servconf.h"
#include "uidswap.h"
#include "compat.h"
#include "buffer.h"
#include "bufaux.h"
#include "cipher.h"
#include "kex.h"
#include "key.h"
#include "dh.h"
#include "myproposal.h"
#include "authfile.h"
#include "pathnames.h"
#include "atomicio.h"
#include "canohost.h"
#include "auth.h"
#include "misc.h"
#include "msg.h"
#include "dispatch.h"
#include "channels.h"
#include "session.h"
#include "monitor_mm.h"
#include "monitor.h"
#include "monitor_wrap.h"
#include "monitor_fdpass.h"

#ifdef LIBWRAP
#include <tcpd.h>
#include <syslog.h>
int allow_severity = LOG_INFO;
int deny_severity = LOG_WARNING;
#endif /* LIBWRAP */

#ifndef O_NOCTTY
#define O_NOCTTY	0
#endif

/* Re-exec fds */
#define REEXEC_DEVCRYPTO_RESERVED_FD	(STDERR_FILENO + 1)
#define REEXEC_STARTUP_PIPE_FD		(STDERR_FILENO + 2)
#define REEXEC_CONFIG_PASS_FD		(STDERR_FILENO + 3)
#define REEXEC_MIN_FREE_FD		(STDERR_FILENO + 4)

extern char *__progname;

/* Server configuration options. */
ServerOptions options;

/* Name of the server configuration file. */
char *config_file_name = _PATH_SERVER_CONFIG_FILE;

/*
 * Debug mode flag.  This can be set on the command line.  If debug
 * mode is enabled, extra debugging output will be sent to the system
 * log, the daemon will not go to background, and will exit after processing
 * the first connection.
 */
int debug_flag = 0;

/* Flag indicating that the daemon should only test the configuration and keys. */
int test_flag = 0;

/* Flag indicating that the daemon is being started from inetd. */
int inetd_flag = 0;

/* Flag indicating that sshd should not detach and become a daemon. */
int no_daemon_flag = 0;

/* debug goes to stderr unless inetd_flag is set */
int log_stderr = 0;

/* Saved arguments to main(). */
char **saved_argv;
int saved_argc;

/* re-exec */
int rexeced_flag = 0;
int rexec_flag = 1;
int rexec_argc = 0;
char **rexec_argv;

/*
 * The sockets that the server is listening; this is used in the SIGHUP
 * signal handler.
 */
#define	MAX_LISTEN_SOCKS	16
int listen_socks[MAX_LISTEN_SOCKS];
int num_listen_socks = 0;

/*
 * the client's version string, passed by sshd2 in compat mode. if != NULL,
 * sshd will skip the version-number exchange
 */
char *client_version_string = NULL;
char *server_version_string = NULL;

/* for rekeying XXX fixme */
Kex *xxx_kex;

/*
 * Any really sensitive data in the application is contained in this
 * structure. The idea is that this structure could be locked into memory so
 * that the pages do not get written into swap.  However, there are some
 * problems. The private key contains BIGNUMs, and we do not (in principle)
 * have access to the internals of them, and locking just the structure is
 * not very useful.  Currently, memory locking is not implemented.
 */
struct {
	Key	*server_key;		/* ephemeral server key */
	Key	*ssh1_host_key;		/* ssh1 host key */
	Key	**host_keys;		/* all private host keys */
	int	have_ssh1_key;
	int	have_ssh2_key;
	u_char	ssh1_cookie[SSH_SESSION_KEY_LENGTH];
} sensitive_data;

/*
 * Flag indicating whether the RSA server key needs to be regenerated.
 * Is set in the SIGALRM handler and cleared when the key is regenerated.
 */
static volatile sig_atomic_t key_do_regen = 0;

/* This is set to true when a signal is received. */
static volatile sig_atomic_t received_sighup = 0;
static volatile sig_atomic_t received_sigterm = 0;

/* session identifier, used by RSA-auth */
u_char session_id[16];

/* same for ssh2 */
u_char *session_id2 = NULL;
u_int session_id2_len = 0;

/* record remote hostname or ip */
u_int utmp_len = MAXHOSTNAMELEN;

/* options.max_startup sized array of fd ints */
int *startup_pipes = NULL;
int startup_pipe;		/* in child */

/* variables used for privilege separation */
int use_privsep;
struct monitor *pmonitor = NULL;

/* global authentication context */
Authctxt *the_authctxt = NULL;

/* message to be displayed after login */
Buffer loginmsg;

/* Prototypes for various functions defined later in this file. */
void destroy_sensitive_data(void);
void demote_sensitive_data(void);

static void do_ssh1_kex(void);
static void do_ssh2_kex(void);

/*
 * Close all listening sockets
 */
static void
close_listen_socks(void)
{
	int i;

	for (i = 0; i < num_listen_socks; i++)
		close(listen_socks[i]);
	num_listen_socks = -1;
}

static void
close_startup_pipes(void)
{
	int i;

	if (startup_pipes)
		for (i = 0; i < options.max_startups; i++)
			if (startup_pipes[i] != -1)
				close(startup_pipes[i]);
}

/*
 * Signal handler for SIGHUP.  Sshd execs itself when it receives SIGHUP;
 * the effect is to reread the configuration file (and to regenerate
 * the server key).
 */
static void
sighup_handler(int sig)
{
	int save_errno = errno;

	received_sighup = 1;
	signal(SIGHUP, sighup_handler);
	errno = save_errno;
}

/*
 * Called from the main program after receiving SIGHUP.
 * Restarts the server.
 */
static void
sighup_restart(void)
{
	logit("Received SIGHUP; restarting.");
	close_listen_socks();
	close_startup_pipes();
	execv(saved_argv[0], saved_argv);
	logit("RESTART FAILED: av[0]='%.100s', error: %.100s.", saved_argv[0],
	    strerror(errno));
	exit(1);
}

/*
 * Generic signal handler for terminating signals in the master daemon.
 */
static void
sigterm_handler(int sig)
{
	received_sigterm = sig;
}

/*
 * SIGCHLD handler.  This is called whenever a child dies.  This will then
 * reap any zombies left by exited children.
 */
static void
main_sigchld_handler(int sig)
{
	int save_errno = errno;
	pid_t pid;
	int status;

	while ((pid = waitpid(-1, &status, WNOHANG)) > 0 ||
	    (pid < 0 && errno == EINTR))
		;

	signal(SIGCHLD, main_sigchld_handler);
	errno = save_errno;
}

/*
 * Signal handler for the alarm after the login grace period has expired.
 */
static void
grace_alarm_handler(int sig)
{
	/* XXX no idea how fix this signal handler */

	if (use_privsep && pmonitor != NULL && pmonitor->m_pid > 0)
		kill(pmonitor->m_pid, SIGALRM);

	/* Log error and exit. */
	fatal("Timeout before authentication for %s", get_remote_ipaddr());
}

/*
 * Signal handler for the key regeneration alarm.  Note that this
 * alarm only occurs in the daemon waiting for connections, and it does not
 * do anything with the private key or random state before forking.
 * Thus there should be no concurrency control/asynchronous execution
 * problems.
 */
static void
generate_ephemeral_server_key(void)
{
	u_int32_t rnd = 0;
	int i;

	verbose("Generating %s%d bit RSA key.",
	    sensitive_data.server_key ? "new " : "", options.server_key_bits);
	if (sensitive_data.server_key != NULL)
		key_free(sensitive_data.server_key);
	sensitive_data.server_key = key_generate(KEY_RSA1,
	    options.server_key_bits);
	verbose("RSA key generation complete.");

	for (i = 0; i < SSH_SESSION_KEY_LENGTH; i++) {
		if (i % 4 == 0)
			rnd = arc4random();
		sensitive_data.ssh1_cookie[i] = rnd & 0xff;
		rnd >>= 8;
	}
	arc4random_stir();
}

static void
key_regeneration_alarm(int sig)
{
	int save_errno = errno;

	signal(SIGALRM, SIG_DFL);
	errno = save_errno;
	key_do_regen = 1;
}

static void
sshd_exchange_identification(int sock_in, int sock_out)
{
	u_int i;
	int mismatch;
	int remote_major, remote_minor;
	int major, minor;
	char *s;
	char buf[256];			/* Must not be larger than remote_version. */
	char remote_version[256];	/* Must be at least as big as buf. */

	if ((options.protocol & SSH_PROTO_1) &&
	    (options.protocol & SSH_PROTO_2)) {
		major = PROTOCOL_MAJOR_1;
		minor = 99;
	} else if (options.protocol & SSH_PROTO_2) {
		major = PROTOCOL_MAJOR_2;
		minor = PROTOCOL_MINOR_2;
	} else {
		major = PROTOCOL_MAJOR_1;
		minor = PROTOCOL_MINOR_1;
	}
	snprintf(buf, sizeof buf, "SSH-%d.%d-%.100s\n", major, minor, SSH_VERSION);
	server_version_string = xstrdup(buf);

	/* Send our protocol version identification. */
	if (atomicio(vwrite, sock_out, server_version_string,
	    strlen(server_version_string))
	    != strlen(server_version_string)) {
		logit("Could not write ident string to %s", get_remote_ipaddr());
		cleanup_exit(255);
	}

	/* Read other sides version identification. */
	memset(buf, 0, sizeof(buf));
	for (i = 0; i < sizeof(buf) - 1; i++) {
		if (atomicio(read, sock_in, &buf[i], 1) != 1) {
			logit("Did not receive identification string from %s",
			    get_remote_ipaddr());
			cleanup_exit(255);
		}
		if (buf[i] == '\r') {
			buf[i] = 0;
			/* Kludge for F-Secure Macintosh < 1.0.2 */
			if (i == 12 &&
			    strncmp(buf, "SSH-1.5-W1.0", 12) == 0)
				break;
			continue;
		}
		if (buf[i] == '\n') {
			buf[i] = 0;
			break;
		}
	}
	buf[sizeof(buf) - 1] = 0;
	client_version_string = xstrdup(buf);

	/*
	 * Check that the versions match.  In future this might accept
	 * several versions and set appropriate flags to handle them.
	 */
	if (sscanf(client_version_string, "SSH-%d.%d-%[^\n]\n",
	    &remote_major, &remote_minor, remote_version) != 3) {
		s = "Protocol mismatch.\n";
		(void) atomicio(vwrite, sock_out, s, strlen(s));
		close(sock_in);
		close(sock_out);
		logit("Bad protocol version identification '%.100s' from %s",
		    client_version_string, get_remote_ipaddr());
		cleanup_exit(255);
	}
	debug("Client protocol version %d.%d; client software version %.100s",
	    remote_major, remote_minor, remote_version);

	compat_datafellows(remote_version);

	if (datafellows & SSH_BUG_PROBE) {
		logit("probed from %s with %s.  Don't panic.",
		    get_remote_ipaddr(), client_version_string);
		cleanup_exit(255);
	}

	if (datafellows & SSH_BUG_SCANNER) {
		logit("scanned from %s with %s.  Don't panic.",
		    get_remote_ipaddr(), client_version_string);
		cleanup_exit(255);
	}

	mismatch = 0;
	switch (remote_major) {
	case 1:
		if (remote_minor == 99) {
			if (options.protocol & SSH_PROTO_2)
				enable_compat20();
			else
				mismatch = 1;
			break;
		}
		if (!(options.protocol & SSH_PROTO_1)) {
			mismatch = 1;
			break;
		}
		if (remote_minor < 3) {
			packet_disconnect("Your ssh version is too old and "
			    "is no longer supported.  Please install a newer version.");
		} else if (remote_minor == 3) {
			/* note that this disables agent-forwarding */
			enable_compat13();
		}
		break;
	case 2:
		if (options.protocol & SSH_PROTO_2) {
			enable_compat20();
			break;
		}
		/* FALLTHROUGH */
	default:
		mismatch = 1;
		break;
	}
	chop(server_version_string);
	debug("Local version string %.200s", server_version_string);

	if (mismatch) {
		s = "Protocol major versions differ.\n";
		(void) atomicio(vwrite, sock_out, s, strlen(s));
		close(sock_in);
		close(sock_out);
		logit("Protocol major versions differ for %s: %.200s vs. %.200s",
		    get_remote_ipaddr(),
		    server_version_string, client_version_string);
		cleanup_exit(255);
	}
}

/* Destroy the host and server keys.  They will no longer be needed. */
void
destroy_sensitive_data(void)
{
	int i;

	if (sensitive_data.server_key) {
		key_free(sensitive_data.server_key);
		sensitive_data.server_key = NULL;
	}
	for (i = 0; i < options.num_host_key_files; i++) {
		if (sensitive_data.host_keys[i]) {
			key_free(sensitive_data.host_keys[i]);
			sensitive_data.host_keys[i] = NULL;
		}
	}
	sensitive_data.ssh1_host_key = NULL;
	memset(sensitive_data.ssh1_cookie, 0, SSH_SESSION_KEY_LENGTH);
}

/* Demote private to public keys for network child */
void
demote_sensitive_data(void)
{
	Key *tmp;
	int i;

	if (sensitive_data.server_key) {
		tmp = key_demote(sensitive_data.server_key);
		key_free(sensitive_data.server_key);
		sensitive_data.server_key = tmp;
	}

	for (i = 0; i < options.num_host_key_files; i++) {
		if (sensitive_data.host_keys[i]) {
			tmp = key_demote(sensitive_data.host_keys[i]);
			key_free(sensitive_data.host_keys[i]);
			sensitive_data.host_keys[i] = tmp;
			if (tmp->type == KEY_RSA1)
				sensitive_data.ssh1_host_key = tmp;
		}
	}

	/* We do not clear ssh1_host key and cookie.  XXX - Okay Niels? */
}

static void
privsep_preauth_child(void)
{
	u_int32_t rnd[256];
	gid_t gidset[1];
	struct passwd *pw;
	int i;

	/* Enable challenge-response authentication for privilege separation */
	privsep_challenge_enable();

	for (i = 0; i < 256; i++)
		rnd[i] = arc4random();
	RAND_seed(rnd, sizeof(rnd));

	/* Demote the private keys to public keys. */
	demote_sensitive_data();

	if ((pw = getpwnam(SSH_PRIVSEP_USER)) == NULL)
		fatal("Privilege separation user %s does not exist",
		    SSH_PRIVSEP_USER);
	memset(pw->pw_passwd, 0, strlen(pw->pw_passwd));
	endpwent();

	/* Change our root directory */
	if (chroot(_PATH_PRIVSEP_CHROOT_DIR) == -1)
		fatal("chroot(\"%s\"): %s", _PATH_PRIVSEP_CHROOT_DIR,
		    strerror(errno));
	if (chdir("/") == -1)
		fatal("chdir(\"/\"): %s", strerror(errno));

	/* Drop our privileges */
	debug3("privsep user:group %u:%u", (u_int)pw->pw_uid,
	    (u_int)pw->pw_gid);
#if 0
	/* XXX not ready, too heavy after chroot */
	do_setusercontext(pw);
#else
	gidset[0] = pw->pw_gid;
	if (setgroups(1, gidset) < 0)
		fatal("setgroups: %.100s", strerror(errno));
	permanently_set_uid(pw);
#endif
}

static int
privsep_preauth(Authctxt *authctxt)
{
	int status;
	pid_t pid;

	/* Set up unprivileged child process to deal with network data */
	pmonitor = monitor_init();
	/* Store a pointer to the kex for later rekeying */
	pmonitor->m_pkex = &xxx_kex;

	pid = fork();
	if (pid == -1) {
		fatal("fork of unprivileged child failed");
	} else if (pid != 0) {
		debug2("Network child is on pid %ld", (long)pid);

		close(pmonitor->m_recvfd);
		pmonitor->m_pid = pid;
		monitor_child_preauth(authctxt, pmonitor);
		close(pmonitor->m_sendfd);

		/* Sync memory */
		monitor_sync(pmonitor);

		/* Wait for the child's exit status */
		while (waitpid(pid, &status, 0) < 0)
			if (errno != EINTR)
				break;
		return (1);
	} else {
		/* child */

		close(pmonitor->m_sendfd);

		/* Demote the child */
		if (getuid() == 0 || geteuid() == 0)
			privsep_preauth_child();
		setproctitle("%s", "[net]");
	}
	return (0);
}

static void
privsep_postauth(Authctxt *authctxt)
{
#ifdef DISABLE_FD_PASSING
	if (1) {
#else
	if (authctxt->pw->pw_uid == 0 || options.use_login) {
#endif
		/* File descriptor passing is broken or root login */
		use_privsep = 0;
		goto skip;
	}

	/* New socket pair */
	monitor_reinit(pmonitor);

	pmonitor->m_pid = fork();
	if (pmonitor->m_pid == -1)
		fatal("fork of unprivileged child failed");
	else if (pmonitor->m_pid != 0) {
		debug2("User child is on pid %ld", (long)pmonitor->m_pid);
		close(pmonitor->m_recvfd);
		buffer_clear(&loginmsg);
		monitor_child_postauth(pmonitor);

		/* NEVERREACHED */
		exit(0);
	}

	close(pmonitor->m_sendfd);

	/* Demote the private keys to public keys. */
	demote_sensitive_data();

	/* Drop privileges */
	do_setusercontext(authctxt->pw);

 skip:
	/* It is safe now to apply the key state */
	monitor_apply_keystate(pmonitor);

	/*
	 * Tell the packet layer that authentication was successful, since
	 * this information is not part of the key state.
	 */
	packet_set_authenticated();
}

static char *
list_hostkey_types(void)
{
	Buffer b;
	const char *p;
	char *ret;
	int i;

	buffer_init(&b);
	for (i = 0; i < options.num_host_key_files; i++) {
		Key *key = sensitive_data.host_keys[i];
		if (key == NULL)
			continue;
		switch (key->type) {
		case KEY_RSA:
		case KEY_DSA:
			if (buffer_len(&b) > 0)
				buffer_append(&b, ",", 1);
			p = key_ssh_name(key);
			buffer_append(&b, p, strlen(p));
			break;
		}
	}
	buffer_append(&b, "\0", 1);
	ret = xstrdup(buffer_ptr(&b));
	buffer_free(&b);
	debug("list_hostkey_types: %s", ret);
	return ret;
}

Key *
get_hostkey_by_type(int type)
{
	int i;

	for (i = 0; i < options.num_host_key_files; i++) {
		Key *key = sensitive_data.host_keys[i];
		if (key != NULL && key->type == type)
			return key;
	}
	return NULL;
}

Key *
get_hostkey_by_index(int ind)
{
	if (ind < 0 || ind >= options.num_host_key_files)
		return (NULL);
	return (sensitive_data.host_keys[ind]);
}

int
get_hostkey_index(Key *key)
{
	int i;

	for (i = 0; i < options.num_host_key_files; i++) {
		if (key == sensitive_data.host_keys[i])
			return (i);
	}
	return (-1);
}

/*
 * returns 1 if connection should be dropped, 0 otherwise.
 * dropping starts at connection #max_startups_begin with a probability
 * of (max_startups_rate/100). the probability increases linearly until
 * all connections are dropped for startups > max_startups
 */
static int
drop_connection(int startups)
{
	int p, r;

	if (startups < options.max_startups_begin)
		return 0;
	if (startups >= options.max_startups)
		return 1;
	if (options.max_startups_rate == 100)
		return 1;

	p  = 100 - options.max_startups_rate;
	p *= startups - options.max_startups_begin;
	p /= options.max_startups - options.max_startups_begin;
	p += options.max_startups_rate;
	r = arc4random() % 100;

	debug("drop_connection: p %d, r %d", p, r);
	return (r < p) ? 1 : 0;
}

static void
usage(void)
{
	fprintf(stderr, "%s, %s\n",
	    SSH_RELEASE, SSLeay_version(SSLEAY_VERSION));
	fprintf(stderr,
"usage: sshd [-46Ddeiqt] [-b bits] [-f config_file] [-g login_grace_time]\n"
"            [-h host_key_file] [-k key_gen_time] [-o option] [-p port] [-u len]\n"
	);
	exit(1);
}

static void
send_rexec_state(int fd, Buffer *conf)
{
	Buffer m;

	debug3("%s: entering fd = %d config len %d", __func__, fd,
	    buffer_len(conf));

	/*
	 * Protocol from reexec master to child:
	 *	string	configuration
	 *	u_int	ephemeral_key_follows
	 *	bignum	e		(only if ephemeral_key_follows == 1)
	 *	bignum	n			"
	 *	bignum	d			"
	 *	bignum	iqmp			"
	 *	bignum	p			"
	 *	bignum	q			"
	 *	string rngseed		(only if OpenSSL is not self-seeded)
	 */
	buffer_init(&m);
	buffer_put_cstring(&m, buffer_ptr(conf));

	if (sensitive_data.server_key != NULL &&
	    sensitive_data.server_key->type == KEY_RSA1) {
		buffer_put_int(&m, 1);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->e);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->n);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->d);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->iqmp);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->p);
		buffer_put_bignum(&m, sensitive_data.server_key->rsa->q);
	} else
		buffer_put_int(&m, 0);

#ifndef OPENSSL_PRNG_ONLY
	rexec_send_rng_seed(&m);
#endif

	if (ssh_msg_send(fd, 0, &m) == -1)
		fatal("%s: ssh_msg_send failed", __func__);

	buffer_free(&m);

	debug3("%s: done", __func__);
}

static void
recv_rexec_state(int fd, Buffer *conf)
{
	Buffer m;
	char *cp;
	u_int len;

	debug3("%s: entering fd = %d", __func__, fd);

	buffer_init(&m);

	if (ssh_msg_recv(fd, &m) == -1)
		fatal("%s: ssh_msg_recv failed", __func__);
	if (buffer_get_char(&m) != 0)
		fatal("%s: rexec version mismatch", __func__);

	cp = buffer_get_string(&m, &len);
	if (conf != NULL)
		buffer_append(conf, cp, len + 1);
	xfree(cp);

	if (buffer_get_int(&m)) {
		if (sensitive_data.server_key != NULL)
			key_free(sensitive_data.server_key);
		sensitive_data.server_key = key_new_private(KEY_RSA1);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->e);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->n);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->d);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->iqmp);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->p);
		buffer_get_bignum(&m, sensitive_data.server_key->rsa->q);
		rsa_generate_additional_parameters(
		    sensitive_data.server_key->rsa);
	}

#ifndef OPENSSL_PRNG_ONLY
	rexec_recv_rng_seed(&m);
#endif

	buffer_free(&m);

	debug3("%s: done", __func__);
}

/*
 * Main program for the daemon.
 */
int
main(int ac, char **av)
{
	extern char *optarg;
	extern int optind;
	int opt, j, i, fdsetsz, on = 1;
	int sock_in = -1, sock_out = -1, newsock = -1;
	pid_t pid;
	socklen_t fromlen;
	fd_set *fdset;
	struct sockaddr_storage from;
	const char *remote_ip;
	int remote_port;
	FILE *f;
	struct addrinfo *ai;
	char ntop[NI_MAXHOST], strport[NI_MAXSERV];
	char *line;
	int listen_sock, maxfd;
	int startup_p[2] = { -1 , -1 }, config_s[2] = { -1 , -1 };
	int startups = 0;
	Key *key;
	Authctxt *authctxt;
	int ret, key_used = 0;
	Buffer cfg;

#ifdef HAVE_SECUREWARE
	(void)set_auth_parameters(ac, av);
#endif
	__progname = ssh_get_progname(av[0]);
	init_rng();

	/* Save argv. Duplicate so setproctitle emulation doesn't clobber it */
	saved_argc = ac;
	rexec_argc = ac;
	saved_argv = xmalloc(sizeof(*saved_argv) * (ac + 1));
	for (i = 0; i < ac; i++)
		saved_argv[i] = xstrdup(av[i]);
	saved_argv[i] = NULL;

#ifndef HAVE_SETPROCTITLE
	/* Prepare for later setproctitle emulation */
	compat_init_setproctitle(ac, av);
	av = saved_argv;
#endif

	if (geteuid() == 0 && setgroups(0, NULL) == -1)
		debug("setgroups(): %.200s", strerror(errno));

	/* Ensure that fds 0, 1 and 2 are open or directed to /dev/null */
	sanitise_stdfd();

	/* Initialize configuration options to their default values. */
	initialize_server_options(&options);

	/* Parse command-line arguments. */
	while ((opt = getopt(ac, av, "f:p:b:k:h:g:u:o:dDeiqrtQR46")) != -1) {
		switch (opt) {
		case '4':
			options.address_family = AF_INET;
			break;
		case '6':
			options.address_family = AF_INET6;
			break;
		case 'f':
			config_file_name = optarg;
			break;
		case 'd':
			if (debug_flag == 0) {
				debug_flag = 1;
				options.log_level = SYSLOG_LEVEL_DEBUG1;
			} else if (options.log_level < SYSLOG_LEVEL_DEBUG3)
				options.log_level++;
			break;
		case 'D':
			no_daemon_flag = 1;
			break;
		case 'e':
			log_stderr = 1;
			break;
		case 'i':
			inetd_flag = 1;
			break;
		case 'r':
			rexec_flag = 0;
			break;
		case 'R':
			rexeced_flag = 1;
			inetd_flag = 1;
			break;
		case 'Q':
			/* ignored */
			break;
		case 'q':
			options.log_level = SYSLOG_LEVEL_QUIET;
			break;
		case 'b':
			options.server_key_bits = atoi(optarg);
			break;
		case 'p':
			options.ports_from_cmdline = 1;
			if (options.num_ports >= MAX_PORTS) {
				fprintf(stderr, "too many ports.\n");
				exit(1);
			}
			options.ports[options.num_ports++] = a2port(optarg);
			if (options.ports[options.num_ports-1] == 0) {
				fprintf(stderr, "Bad port number.\n");
				exit(1);
			}
			break;
		case 'g':
			if ((options.login_grace_time = convtime(optarg)) == -1) {
				fprintf(stderr, "Invalid login grace time.\n");
				exit(1);
			}
			break;
		case 'k':
			if ((options.key_regeneration_time = convtime(optarg)) == -1) {
				fprintf(stderr, "Invalid key regeneration interval.\n");
				exit(1);
			}
			break;
		case 'h':
			if (options.num_host_key_files >= MAX_HOSTKEYS) {
				fprintf(stderr, "too many host keys.\n");
				exit(1);
			}
			options.host_key_files[options.num_host_key_files++] = optarg;
			break;
		case 't':
			test_flag = 1;
			break;
		case 'u':
			utmp_len = atoi(optarg);
			if (utmp_len > MAXHOSTNAMELEN) {
				fprintf(stderr, "Invalid utmp length.\n");
				exit(1);
			}
			break;
		case 'o':
			line = xstrdup(optarg);
			if (process_server_config_line(&options, line,
			    "command-line", 0) != 0)
				exit(1);
			xfree(line);
			break;
		case '?':
		default:
			usage();
			break;
		}
	}
	if (rexeced_flag || inetd_flag)
		rexec_flag = 0;
	if (rexec_flag && (av[0] == NULL || *av[0] != '/'))
		fatal("sshd re-exec requires execution with an absolute path");
	if (rexeced_flag)
		closefrom(REEXEC_MIN_FREE_FD);
	else
		closefrom(REEXEC_DEVCRYPTO_RESERVED_FD);

	SSLeay_add_all_algorithms();

	/*
	 * Force logging to stderr until we have loaded the private host
	 * key (unless started from inetd)
	 */
	log_init(__progname,
	    options.log_level == SYSLOG_LEVEL_NOT_SET ?
	    SYSLOG_LEVEL_INFO : options.log_level,
	    options.log_facility == SYSLOG_FACILITY_NOT_SET ?
	    SYSLOG_FACILITY_AUTH : options.log_facility,
	    log_stderr || !inetd_flag);

	/*
	 * Unset KRB5CCNAME, otherwise the user's session may inherit it from
	 * root's environment
	 */
	if (getenv("KRB5CCNAME") != NULL)
		unsetenv("KRB5CCNAME");

#ifdef _UNICOS
	/* Cray can define user privs drop all privs now!
	 * Not needed on PRIV_SU systems!
	 */
	drop_cray_privs();
#endif

	sensitive_data.server_key = NULL;
	sensitive_data.ssh1_host_key = NULL;
	sensitive_data.have_ssh1_key = 0;
	sensitive_data.have_ssh2_key = 0;

	/* Fetch our configuration */
	buffer_init(&cfg);
	if (rexeced_flag)
		recv_rexec_state(REEXEC_CONFIG_PASS_FD, &cfg);
	else
		load_server_config(config_file_name, &cfg);

	parse_server_config(&options,
	    rexeced_flag ? "rexec" : config_file_name, &cfg);

	if (!rexec_flag)
		buffer_free(&cfg);

	seed_rng();

	/* Fill in default values for those options not explicitly set. */
	fill_default_server_options(&options);

	/* set default channel AF */
	channel_set_af(options.address_family);

	/* Check that there are no remaining arguments. */
	if (optind < ac) {
		fprintf(stderr, "Extra argument %s.\n", av[optind]);
		exit(1);
	}

	debug("sshd version %.100s", SSH_RELEASE);

	/* load private host keys */
	sensitive_data.host_keys = xmalloc(options.num_host_key_files *
	    sizeof(Key *));
	for (i = 0; i < options.num_host_key_files; i++)
		sensitive_data.host_keys[i] = NULL;

	for (i = 0; i < options.num_host_key_files; i++) {
		key = key_load_private(options.host_key_files[i], "", NULL);
		sensitive_data.host_keys[i] = key;
		if (key == NULL) {
			error("Could not load host key: %s",
			    options.host_key_files[i]);
			sensitive_data.host_keys[i] = NULL;
			continue;
		}
		switch (key->type) {
		case KEY_RSA1:
			sensitive_data.ssh1_host_key = key;
			sensitive_data.have_ssh1_key = 1;
			break;
		case KEY_RSA:
		case KEY_DSA:
			sensitive_data.have_ssh2_key = 1;
			break;
		}
		debug("private host key: #%d type %d %s", i, key->type,
		    key_type(key));
	}
	if ((options.protocol & SSH_PROTO_1) && !sensitive_data.have_ssh1_key) {
		logit("Disabling protocol version 1. Could not load host key");
		options.protocol &= ~SSH_PROTO_1;
	}
	if ((options.protocol & SSH_PROTO_2) && !sensitive_data.have_ssh2_key) {
		logit("Disabling protocol version 2. Could not load host key");
		options.protocol &= ~SSH_PROTO_2;
	}
	if (!(options.protocol & (SSH_PROTO_1|SSH_PROTO_2))) {
		logit("sshd: no hostkeys available -- exiting.");
		exit(1);
	}

	/* Check certain values for sanity. */
	if (options.protocol & SSH_PROTO_1) {
		if (options.server_key_bits < 512 ||
		    options.server_key_bits > 32768) {
			fprintf(stderr, "Bad server key size.\n");
			exit(1);
		}
		/*
		 * Check that server and host key lengths differ sufficiently. This
		 * is necessary to make double encryption work with rsaref. Oh, I
		 * hate software patents. I dont know if this can go? Niels
		 */
		if (options.server_key_bits >
		    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) -
		    SSH_KEY_BITS_RESERVED && options.server_key_bits <
		    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) +
		    SSH_KEY_BITS_RESERVED) {
			options.server_key_bits =
			    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) +
			    SSH_KEY_BITS_RESERVED;
			debug("Forcing server key to %d bits to make it differ from host key.",
			    options.server_key_bits);
		}
	}

	if (use_privsep) {
		struct passwd *pw;
		struct stat st;

		if ((pw = getpwnam(SSH_PRIVSEP_USER)) == NULL)
			fatal("Privilege separation user %s does not exist",
			    SSH_PRIVSEP_USER);
		if ((stat(_PATH_PRIVSEP_CHROOT_DIR, &st) == -1) ||
		    (S_ISDIR(st.st_mode) == 0))
			fatal("Missing privilege separation directory: %s",
			    _PATH_PRIVSEP_CHROOT_DIR);

#ifdef HAVE_CYGWIN
		if (check_ntsec(_PATH_PRIVSEP_CHROOT_DIR) &&
		    (st.st_uid != getuid () ||
		    (st.st_mode & (S_IWGRP|S_IWOTH)) != 0))
#else
		if (st.st_uid != 0 || (st.st_mode & (S_IWGRP|S_IWOTH)) != 0)
#endif
			fatal("%s must be owned by root and not group or "
			    "world-writable.", _PATH_PRIVSEP_CHROOT_DIR);
	}

	/* Configuration looks good, so exit if in test mode. */
	if (test_flag)
		exit(0);

	/*
	 * Clear out any supplemental groups we may have inherited.  This
	 * prevents inadvertent creation of files with bad modes (in the
	 * portable version at least, it's certainly possible for PAM
	 * to create a file, and we can't control the code in every
	 * module which might be used).
	 */
	if (setgroups(0, NULL) < 0)
		debug("setgroups() failed: %.200s", strerror(errno));

	if (rexec_flag) {
		rexec_argv = xmalloc(sizeof(char *) * (rexec_argc + 2));
		for (i = 0; i < rexec_argc; i++) {
			debug("rexec_argv[%d]='%s'", i, saved_argv[i]);
			rexec_argv[i] = saved_argv[i];
		}
		rexec_argv[rexec_argc] = "-R";
		rexec_argv[rexec_argc + 1] = NULL;
	}

	/* Initialize the log (it is reinitialized below in case we forked). */
	if (debug_flag && (!inetd_flag || rexeced_flag))
		log_stderr = 1;
	log_init(__progname, options.log_level, options.log_facility, log_stderr);

	/*
	 * If not in debugging mode, and not started from inetd, disconnect
	 * from the controlling terminal, and fork.  The original process
	 * exits.
	 */
	if (!(debug_flag || inetd_flag || no_daemon_flag)) {
#ifdef TIOCNOTTY
		int fd;
#endif /* TIOCNOTTY */
		if (daemon(0, 0) < 0)
			fatal("daemon() failed: %.200s", strerror(errno));

		/* Disconnect from the controlling tty. */
#ifdef TIOCNOTTY
		fd = open(_PATH_TTY, O_RDWR | O_NOCTTY);
		if (fd >= 0) {
			(void) ioctl(fd, TIOCNOTTY, NULL);
			close(fd);
		}
#endif /* TIOCNOTTY */
	}
	/* Reinitialize the log (because of the fork above). */
	log_init(__progname, options.log_level, options.log_facility, log_stderr);

	/* Initialize the random number generator. */
	arc4random_stir();

	/* Chdir to the root directory so that the current disk can be
	   unmounted if desired. */
	chdir("/");

	/* ignore SIGPIPE */
	signal(SIGPIPE, SIG_IGN);

	/* Start listening for a socket, unless started from inetd. */
	if (inetd_flag) {
		int fd;

		startup_pipe = -1;
		if (rexeced_flag) {
			close(REEXEC_CONFIG_PASS_FD);
			sock_in = sock_out = dup(STDIN_FILENO);
			if (!debug_flag) {
				startup_pipe = dup(REEXEC_STARTUP_PIPE_FD);
				close(REEXEC_STARTUP_PIPE_FD);
			}
		} else {
			sock_in = dup(STDIN_FILENO);
			sock_out = dup(STDOUT_FILENO);
		}
		/*
		 * We intentionally do not close the descriptors 0, 1, and 2
		 * as our code for setting the descriptors won't work if
		 * ttyfd happens to be one of those.
		 */
		if ((fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) {
			dup2(fd, STDIN_FILENO);
			dup2(fd, STDOUT_FILENO);
			if (fd > STDOUT_FILENO)
				close(fd);
		}
		debug("inetd sockets after dupping: %d, %d", sock_in, sock_out);
		if ((options.protocol & SSH_PROTO_1) &&
		    sensitive_data.server_key == NULL)
			generate_ephemeral_server_key();
	} else {
		for (ai = options.listen_addrs; ai; ai = ai->ai_next) {
			if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6)
				continue;
			if (num_listen_socks >= MAX_LISTEN_SOCKS)
				fatal("Too many listen sockets. "
				    "Enlarge MAX_LISTEN_SOCKS");
			if ((ret = getnameinfo(ai->ai_addr, ai->ai_addrlen,
			    ntop, sizeof(ntop), strport, sizeof(strport),
			    NI_NUMERICHOST|NI_NUMERICSERV)) != 0) {
				error("getnameinfo failed: %.100s",
				    (ret != EAI_SYSTEM) ? gai_strerror(ret) :
				    strerror(errno));
				continue;
			}
			/* Create socket for listening. */
			listen_sock = socket(ai->ai_family, ai->ai_socktype,
			    ai->ai_protocol);
			if (listen_sock < 0) {
				/* kernel may not support ipv6 */
				verbose("socket: %.100s", strerror(errno));
				continue;
			}
			if (set_nonblock(listen_sock) == -1) {
				close(listen_sock);
				continue;
			}
			/*
			 * Set socket options.
			 * Allow local port reuse in TIME_WAIT.
			 */
			if (setsockopt(listen_sock, SOL_SOCKET, SO_REUSEADDR,
			    &on, sizeof(on)) == -1)
				error("setsockopt SO_REUSEADDR: %s", strerror(errno));

			debug("Bind to port %s on %s.", strport, ntop);

			/* Bind the socket to the desired port. */
			if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
				if (!ai->ai_next)
				    error("Bind to port %s on %s failed: %.200s.",
					    strport, ntop, strerror(errno));
				close(listen_sock);
				continue;
			}
			listen_socks[num_listen_socks] = listen_sock;
			num_listen_socks++;

			/* Start listening on the port. */
			if (listen(listen_sock, SSH_LISTEN_BACKLOG) < 0)
				fatal("listen on [%s]:%s: %.100s",
				    ntop, strport, strerror(errno));
			logit("Server listening on %s port %s.", ntop, strport);
		}
		freeaddrinfo(options.listen_addrs);

		if (!num_listen_socks)
			fatal("Cannot bind any address.");

		if (options.protocol & SSH_PROTO_1)
			generate_ephemeral_server_key();

		/*
		 * Arrange to restart on SIGHUP.  The handler needs
		 * listen_sock.
		 */
		signal(SIGHUP, sighup_handler);

		signal(SIGTERM, sigterm_handler);
		signal(SIGQUIT, sigterm_handler);

		/* Arrange SIGCHLD to be caught. */
		signal(SIGCHLD, main_sigchld_handler);

		/* Write out the pid file after the sigterm handler is setup */
		if (!debug_flag) {
			/*
			 * Record our pid in /var/run/sshd.pid to make it
			 * easier to kill the correct sshd.  We don't want to
			 * do this before the bind above because the bind will
			 * fail if there already is a daemon, and this will
			 * overwrite any old pid in the file.
			 */
			f = fopen(options.pid_file, "wb");
			if (f == NULL) {
				error("Couldn't create pid file \"%s\": %s",
				    options.pid_file, strerror(errno));
			} else {
				fprintf(f, "%ld\n", (long) getpid());
				fclose(f);
			}
		}

		/* setup fd set for listen */
		fdset = NULL;
		maxfd = 0;
		for (i = 0; i < num_listen_socks; i++)
			if (listen_socks[i] > maxfd)
				maxfd = listen_socks[i];
		/* pipes connected to unauthenticated childs */
		startup_pipes = xmalloc(options.max_startups * sizeof(int));
		for (i = 0; i < options.max_startups; i++)
			startup_pipes[i] = -1;

		/*
		 * Stay listening for connections until the system crashes or
		 * the daemon is killed with a signal.
		 */
		for (;;) {
			if (received_sighup)
				sighup_restart();
			if (fdset != NULL)
				xfree(fdset);
			fdsetsz = howmany(maxfd+1, NFDBITS) * sizeof(fd_mask);
			fdset = (fd_set *)xmalloc(fdsetsz);
			memset(fdset, 0, fdsetsz);

			for (i = 0; i < num_listen_socks; i++)
				FD_SET(listen_socks[i], fdset);
			for (i = 0; i < options.max_startups; i++)
				if (startup_pipes[i] != -1)
					FD_SET(startup_pipes[i], fdset);

			/* Wait in select until there is a connection. */
			ret = select(maxfd+1, fdset, NULL, NULL, NULL);
			if (ret < 0 && errno != EINTR)
				error("select: %.100s", strerror(errno));
			if (received_sigterm) {
				logit("Received signal %d; terminating.",
				    (int) received_sigterm);
				close_listen_socks();
				unlink(options.pid_file);
				exit(255);
			}
			if (key_used && key_do_regen) {
				generate_ephemeral_server_key();
				key_used = 0;
				key_do_regen = 0;
			}
			if (ret < 0)
				continue;

			for (i = 0; i < options.max_startups; i++)
				if (startup_pipes[i] != -1 &&
				    FD_ISSET(startup_pipes[i], fdset)) {
					/*
					 * the read end of the pipe is ready
					 * if the child has closed the pipe
					 * after successful authentication
					 * or if the child has died
					 */
					close(startup_pipes[i]);
					startup_pipes[i] = -1;
					startups--;
				}
			for (i = 0; i < num_listen_socks; i++) {
				if (!FD_ISSET(listen_socks[i], fdset))
					continue;
				fromlen = sizeof(from);
				newsock = accept(listen_socks[i], (struct sockaddr *)&from,
				    &fromlen);
				if (newsock < 0) {
					if (errno != EINTR && errno != EWOULDBLOCK)
						error("accept: %.100s", strerror(errno));
					continue;
				}
				if (unset_nonblock(newsock) == -1) {
					close(newsock);
					continue;
				}
				if (drop_connection(startups) == 1) {
					debug("drop connection #%d", startups);
					close(newsock);
					continue;
				}
				if (pipe(startup_p) == -1) {
					close(newsock);
					continue;
				}

				if (rexec_flag && socketpair(AF_UNIX,
				    SOCK_STREAM, 0, config_s) == -1) {
					error("reexec socketpair: %s",
					    strerror(errno));
					close(newsock);
					close(startup_p[0]);
					close(startup_p[1]);
					continue;
				}

				for (j = 0; j < options.max_startups; j++)
					if (startup_pipes[j] == -1) {
						startup_pipes[j] = startup_p[0];
						if (maxfd < startup_p[0])
							maxfd = startup_p[0];
						startups++;
						break;
					}

				/*
				 * Got connection.  Fork a child to handle it, unless
				 * we are in debugging mode.
				 */
				if (debug_flag) {
					/*
					 * In debugging mode.  Close the listening
					 * socket, and start processing the
					 * connection without forking.
					 */
					debug("Server will not fork when running in debugging mode.");
					close_listen_socks();
					sock_in = newsock;
					sock_out = newsock;
					close(startup_p[0]);
					close(startup_p[1]);
					startup_pipe = -1;
					pid = getpid();
					if (rexec_flag) {
						send_rexec_state(config_s[0],
						    &cfg);
						close(config_s[0]);
					}
					break;
				} else {
					/*
					 * Normal production daemon.  Fork, and have
					 * the child process the connection. The
					 * parent continues listening.
					 */
					if ((pid = fork()) == 0) {
						/*
						 * Child.  Close the listening and max_startup
						 * sockets.  Start using the accepted socket.
						 * Reinitialize logging (since our pid has
						 * changed).  We break out of the loop to handle
						 * the connection.
						 */
						startup_pipe = startup_p[1];
						close_startup_pipes();
						close_listen_socks();
						sock_in = newsock;
						sock_out = newsock;
						log_init(__progname, options.log_level, options.log_facility, log_stderr);
						if (rexec_flag)
							close(config_s[0]);
						break;
					}
				}

				/* Parent.  Stay in the loop. */
				if (pid < 0)
					error("fork: %.100s", strerror(errno));
				else
					debug("Forked child %ld.", (long)pid);

				close(startup_p[1]);

				if (rexec_flag) {
					send_rexec_state(config_s[0], &cfg);
					close(config_s[0]);
					close(config_s[1]);
				}

				/* Mark that the key has been used (it was "given" to the child). */
				if ((options.protocol & SSH_PROTO_1) &&
				    key_used == 0) {
					/* Schedule server key regeneration alarm. */
					signal(SIGALRM, key_regeneration_alarm);
					alarm(options.key_regeneration_time);
					key_used = 1;
				}

				arc4random_stir();

				/* Close the new socket (the child is now taking care of it). */
				close(newsock);
			}
			/* child process check (or debug mode) */
			if (num_listen_socks < 0)
				break;
		}
	}

	/* This is the child processing a new connection. */
	setproctitle("%s", "[accepted]");

	/*
	 * Create a new session and process group since the 4.4BSD
	 * setlogin() affects the entire process group.  We don't
	 * want the child to be able to affect the parent.
	 */
#if !defined(SSHD_ACQUIRES_CTTY)
	/*
	 * If setsid is called, on some platforms sshd will later acquire a
	 * controlling terminal which will result in "could not set
	 * controlling tty" errors.
	 */
	if (!debug_flag && !inetd_flag && setsid() < 0)
		error("setsid: %.100s", strerror(errno));
#endif

	if (rexec_flag) {
		int fd;

		debug("rexec start in %d out %d newsock %d pipe %d sock %d",
		    sock_in, sock_out, newsock, startup_pipe, config_s[0]);
		dup2(newsock, STDIN_FILENO);
		dup2(STDIN_FILENO, STDOUT_FILENO);
		if (startup_pipe == -1)
			close(REEXEC_STARTUP_PIPE_FD);
		else
			dup2(startup_pipe, REEXEC_STARTUP_PIPE_FD);

		dup2(config_s[1], REEXEC_CONFIG_PASS_FD);
		close(config_s[1]);
		if (startup_pipe != -1)
			close(startup_pipe);

		execv(rexec_argv[0], rexec_argv);

		/* Reexec has failed, fall back and continue */
		error("rexec of %s failed: %s", rexec_argv[0], strerror(errno));
		recv_rexec_state(REEXEC_CONFIG_PASS_FD, NULL);
		log_init(__progname, options.log_level,
		    options.log_facility, log_stderr);

		/* Clean up fds */
		startup_pipe = REEXEC_STARTUP_PIPE_FD;
		close(config_s[1]);
		close(REEXEC_CONFIG_PASS_FD);
		newsock = sock_out = sock_in = dup(STDIN_FILENO);
		if ((fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) {
			dup2(fd, STDIN_FILENO);
			dup2(fd, STDOUT_FILENO);
			if (fd > STDERR_FILENO)
				close(fd);
		}
		debug("rexec cleanup in %d out %d newsock %d pipe %d sock %d",
		    sock_in, sock_out, newsock, startup_pipe, config_s[0]);
	}

	/*
	 * Disable the key regeneration alarm.  We will not regenerate the
	 * key since we are no longer in a position to give it to anyone. We
	 * will not restart on SIGHUP since it no longer makes sense.
	 */
	alarm(0);
	signal(SIGALRM, SIG_DFL);
	signal(SIGHUP, SIG_DFL);
	signal(SIGTERM, SIG_DFL);
	signal(SIGQUIT, SIG_DFL);
	signal(SIGCHLD, SIG_DFL);
	signal(SIGINT, SIG_DFL);

	/*
	 * Register our connection.  This turns encryption off because we do
	 * not have a key.
	 */
	packet_set_connection(sock_in, sock_out);
	packet_set_server();

	/* Set SO_KEEPALIVE if requested. */
	if (options.tcp_keep_alive && packet_connection_is_on_socket() &&
	    setsockopt(sock_in, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) < 0)
		error("setsockopt SO_KEEPALIVE: %.100s", strerror(errno));

	if ((remote_port = get_remote_port()) < 0) {
		debug("get_remote_port failed");
		cleanup_exit(255);
	}

	/*
	 * We use get_canonical_hostname with usedns = 0 instead of
	 * get_remote_ipaddr here so IP options will be checked.
	 */
	remote_ip = get_canonical_hostname(0);

#ifdef SSH_AUDIT_EVENTS
	audit_connection_from(remote_ip, remote_port);
#endif
#ifdef LIBWRAP
	/* Check whether logins are denied from this host. */
	if (packet_connection_is_on_socket()) {
		struct request_info req;

		request_init(&req, RQ_DAEMON, __progname, RQ_FILE, sock_in, 0);
		fromhost(&req);

		if (!hosts_access(&req)) {
			debug("Connection refused by tcp wrapper");
			refuse(&req);
			/* NOTREACHED */
			fatal("libwrap refuse returns");
		}
	}
#endif /* LIBWRAP */

	/* Log the connection. */
	verbose("Connection from %.500s port %d", remote_ip, remote_port);

	/*
	 * We don't want to listen forever unless the other side
	 * successfully authenticates itself.  So we set up an alarm which is
	 * cleared after successful authentication.  A limit of zero
	 * indicates no limit. Note that we don't set the alarm in debugging
	 * mode; it is just annoying to have the server exit just when you
	 * are about to discover the bug.
	 */
	signal(SIGALRM, grace_alarm_handler);
	if (!debug_flag)
		alarm(options.login_grace_time);

	sshd_exchange_identification(sock_in, sock_out);

	packet_set_nonblocking();

	/* allocate authentication context */
	authctxt = xmalloc(sizeof(*authctxt));
	memset(authctxt, 0, sizeof(*authctxt));

	authctxt->loginmsg = &loginmsg;

	/* XXX global for cleanup, access from other modules */
	the_authctxt = authctxt;

	/* prepare buffer to collect messages to display to user after login */
	buffer_init(&loginmsg);

	if (use_privsep)
		if (privsep_preauth(authctxt) == 1)
			goto authenticated;

	/* perform the key exchange */
	/* authenticate user and start session */
	if (compat20) {
		do_ssh2_kex();
		do_authentication2(authctxt);
	} else {
		do_ssh1_kex();
		do_authentication(authctxt);
	}
	/*
	 * If we use privilege separation, the unprivileged child transfers
	 * the current keystate and exits
	 */
	if (use_privsep) {
		mm_send_keystate(pmonitor);
		exit(0);
	}

 authenticated:
	/*
	 * Cancel the alarm we set to limit the time taken for
	 * authentication.
	 */
	alarm(0);
	signal(SIGALRM, SIG_DFL);
	if (startup_pipe != -1) {
		close(startup_pipe);
		startup_pipe = -1;
	}

#ifdef SSH_AUDIT_EVENTS
	audit_event(SSH_AUTH_SUCCESS);
#endif

	/*
	 * In privilege separation, we fork another child and prepare
	 * file descriptor passing.
	 */
	if (use_privsep) {
		privsep_postauth(authctxt);
		/* the monitor process [priv] will not return */
		if (!compat20)
			destroy_sensitive_data();
	}

	/* Start session. */
	do_authenticated(authctxt);

	/* The connection has been terminated. */
	verbose("Closing connection to %.100s", remote_ip);

#ifdef USE_PAM
	if (options.use_pam)
		finish_pam();
#endif /* USE_PAM */

#ifdef SSH_AUDIT_EVENTS
	PRIVSEP(audit_event(SSH_CONNECTION_CLOSE));
#endif

	packet_close();

	if (use_privsep)
		mm_terminate();

	exit(0);
}

/*
 * Decrypt session_key_int using our private server key and private host key
 * (key with larger modulus first).
 */
int
ssh1_session_key(BIGNUM *session_key_int)
{
	int rsafail = 0;

	if (BN_cmp(sensitive_data.server_key->rsa->n, sensitive_data.ssh1_host_key->rsa->n) > 0) {
		/* Server key has bigger modulus. */
		if (BN_num_bits(sensitive_data.server_key->rsa->n) <
		    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) + SSH_KEY_BITS_RESERVED) {
			fatal("do_connection: %s: server_key %d < host_key %d + SSH_KEY_BITS_RESERVED %d",
			    get_remote_ipaddr(),
			    BN_num_bits(sensitive_data.server_key->rsa->n),
			    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n),
			    SSH_KEY_BITS_RESERVED);
		}
		if (rsa_private_decrypt(session_key_int, session_key_int,
		    sensitive_data.server_key->rsa) <= 0)
			rsafail++;
		if (rsa_private_decrypt(session_key_int, session_key_int,
		    sensitive_data.ssh1_host_key->rsa) <= 0)
			rsafail++;
	} else {
		/* Host key has bigger modulus (or they are equal). */
		if (BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) <
		    BN_num_bits(sensitive_data.server_key->rsa->n) + SSH_KEY_BITS_RESERVED) {
			fatal("do_connection: %s: host_key %d < server_key %d + SSH_KEY_BITS_RESERVED %d",
			    get_remote_ipaddr(),
			    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n),
			    BN_num_bits(sensitive_data.server_key->rsa->n),
			    SSH_KEY_BITS_RESERVED);
		}
		if (rsa_private_decrypt(session_key_int, session_key_int,
		    sensitive_data.ssh1_host_key->rsa) < 0)
			rsafail++;
		if (rsa_private_decrypt(session_key_int, session_key_int,
		    sensitive_data.server_key->rsa) < 0)
			rsafail++;
	}
	return (rsafail);
}
/*
 * SSH1 key exchange
 */
static void
do_ssh1_kex(void)
{
	int i, len;
	int rsafail = 0;
	BIGNUM *session_key_int;
	u_char session_key[SSH_SESSION_KEY_LENGTH];
	u_char cookie[8];
	u_int cipher_type, auth_mask, protocol_flags;
	u_int32_t rnd = 0;

	/*
	 * Generate check bytes that the client must send back in the user
	 * packet in order for it to be accepted; this is used to defy ip
	 * spoofing attacks.  Note that this only works against somebody
	 * doing IP spoofing from a remote machine; any machine on the local
	 * network can still see outgoing packets and catch the random
	 * cookie.  This only affects rhosts authentication, and this is one
	 * of the reasons why it is inherently insecure.
	 */
	for (i = 0; i < 8; i++) {
		if (i % 4 == 0)
			rnd = arc4random();
		cookie[i] = rnd & 0xff;
		rnd >>= 8;
	}

	/*
	 * Send our public key.  We include in the packet 64 bits of random
	 * data that must be matched in the reply in order to prevent IP
	 * spoofing.
	 */
	packet_start(SSH_SMSG_PUBLIC_KEY);
	for (i = 0; i < 8; i++)
		packet_put_char(cookie[i]);

	/* Store our public server RSA key. */
	packet_put_int(BN_num_bits(sensitive_data.server_key->rsa->n));
	packet_put_bignum(sensitive_data.server_key->rsa->e);
	packet_put_bignum(sensitive_data.server_key->rsa->n);

	/* Store our public host RSA key. */
	packet_put_int(BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));
	packet_put_bignum(sensitive_data.ssh1_host_key->rsa->e);
	packet_put_bignum(sensitive_data.ssh1_host_key->rsa->n);

	/* Put protocol flags. */
	packet_put_int(SSH_PROTOFLAG_HOST_IN_FWD_OPEN);

	/* Declare which ciphers we support. */
	packet_put_int(cipher_mask_ssh1(0));

	/* Declare supported authentication types. */
	auth_mask = 0;
	if (options.rhosts_rsa_authentication)
		auth_mask |= 1 << SSH_AUTH_RHOSTS_RSA;
	if (options.rsa_authentication)
		auth_mask |= 1 << SSH_AUTH_RSA;
	if (options.challenge_response_authentication == 1)
		auth_mask |= 1 << SSH_AUTH_TIS;
	if (options.password_authentication)
		auth_mask |= 1 << SSH_AUTH_PASSWORD;
	packet_put_int(auth_mask);

	/* Send the packet and wait for it to be sent. */
	packet_send();
	packet_write_wait();

	debug("Sent %d bit server key and %d bit host key.",
	    BN_num_bits(sensitive_data.server_key->rsa->n),
	    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));

	/* Read clients reply (cipher type and session key). */
	packet_read_expect(SSH_CMSG_SESSION_KEY);

	/* Get cipher type and check whether we accept this. */
	cipher_type = packet_get_char();

	if (!(cipher_mask_ssh1(0) & (1 << cipher_type)))
		packet_disconnect("Warning: client selects unsupported cipher.");

	/* Get check bytes from the packet.  These must match those we
	   sent earlier with the public key packet. */
	for (i = 0; i < 8; i++)
		if (cookie[i] != packet_get_char())
			packet_disconnect("IP Spoofing check bytes do not match.");

	debug("Encryption type: %.200s", cipher_name(cipher_type));

	/* Get the encrypted integer. */
	if ((session_key_int = BN_new()) == NULL)
		fatal("do_ssh1_kex: BN_new failed");
	packet_get_bignum(session_key_int);

	protocol_flags = packet_get_int();
	packet_set_protocol_flags(protocol_flags);
	packet_check_eom();

	/* Decrypt session_key_int using host/server keys */
	rsafail = PRIVSEP(ssh1_session_key(session_key_int));

	/*
	 * Extract session key from the decrypted integer.  The key is in the
	 * least significant 256 bits of the integer; the first byte of the
	 * key is in the highest bits.
	 */
	if (!rsafail) {
		BN_mask_bits(session_key_int, sizeof(session_key) * 8);
		len = BN_num_bytes(session_key_int);
		if (len < 0 || (u_int)len > sizeof(session_key)) {
			error("do_connection: bad session key len from %s: "
			    "session_key_int %d > sizeof(session_key) %lu",
			    get_remote_ipaddr(), len, (u_long)sizeof(session_key));
			rsafail++;
		} else {
			memset(session_key, 0, sizeof(session_key));
			BN_bn2bin(session_key_int,
			    session_key + sizeof(session_key) - len);

			derive_ssh1_session_id(
			    sensitive_data.ssh1_host_key->rsa->n,
			    sensitive_data.server_key->rsa->n,
			    cookie, session_id);
			/*
			 * Xor the first 16 bytes of the session key with the
			 * session id.
			 */
			for (i = 0; i < 16; i++)
				session_key[i] ^= session_id[i];
		}
	}
	if (rsafail) {
		int bytes = BN_num_bytes(session_key_int);
		u_char *buf = xmalloc(bytes);
		MD5_CTX md;

		logit("do_connection: generating a fake encryption key");
		BN_bn2bin(session_key_int, buf);
		MD5_Init(&md);
		MD5_Update(&md, buf, bytes);
		MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
		MD5_Final(session_key, &md);
		MD5_Init(&md);
		MD5_Update(&md, session_key, 16);
		MD5_Update(&md, buf, bytes);
		MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
		MD5_Final(session_key + 16, &md);
		memset(buf, 0, bytes);
		xfree(buf);
		for (i = 0; i < 16; i++)
			session_id[i] = session_key[i] ^ session_key[i + 16];
	}
	/* Destroy the private and public keys. No longer. */
	destroy_sensitive_data();

	if (use_privsep)
		mm_ssh1_session_id(session_id);

	/* Destroy the decrypted integer.  It is no longer needed. */
	BN_clear_free(session_key_int);

	/* Set the session key.  From this on all communications will be encrypted. */
	packet_set_encryption_key(session_key, SSH_SESSION_KEY_LENGTH, cipher_type);

	/* Destroy our copy of the session key.  It is no longer needed. */
	memset(session_key, 0, sizeof(session_key));

	debug("Received session key; encryption turned on.");

	/* Send an acknowledgment packet.  Note that this packet is sent encrypted. */
	packet_start(SSH_SMSG_SUCCESS);
	packet_send();
	packet_write_wait();
}

/*
 * SSH2 key exchange: diffie-hellman-group1-sha1
 */
static void
do_ssh2_kex(void)
{
	Kex *kex;

	if (options.ciphers != NULL) {
		myproposal[PROPOSAL_ENC_ALGS_CTOS] =
		myproposal[PROPOSAL_ENC_ALGS_STOC] = options.ciphers;
	}
	myproposal[PROPOSAL_ENC_ALGS_CTOS] =
	    compat_cipher_proposal(myproposal[PROPOSAL_ENC_ALGS_CTOS]);
	myproposal[PROPOSAL_ENC_ALGS_STOC] =
	    compat_cipher_proposal(myproposal[PROPOSAL_ENC_ALGS_STOC]);

	if (options.macs != NULL) {
		myproposal[PROPOSAL_MAC_ALGS_CTOS] =
		myproposal[PROPOSAL_MAC_ALGS_STOC] = options.macs;
	}
	if (options.compression == COMP_NONE) {
		myproposal[PROPOSAL_COMP_ALGS_CTOS] =
		myproposal[PROPOSAL_COMP_ALGS_STOC] = "none";
	} else if (options.compression == COMP_DELAYED) {
		myproposal[PROPOSAL_COMP_ALGS_CTOS] =
		myproposal[PROPOSAL_COMP_ALGS_STOC] = "none,zlib@openssh.com";
	}
	
	myproposal[PROPOSAL_SERVER_HOST_KEY_ALGS] = list_hostkey_types();

	/* start key exchange */
	kex = kex_setup(myproposal);
	kex->kex[KEX_DH_GRP1_SHA1] = kexdh_server;
	kex->kex[KEX_DH_GRP14_SHA1] = kexdh_server;
	kex->kex[KEX_DH_GEX_SHA1] = kexgex_server;
	kex->kex[KEX_DH_GEX_SHA256] = kexgex_server;
	kex->server = 1;
	kex->client_version_string=client_version_string;
	kex->server_version_string=server_version_string;
	kex->load_host_key=&get_hostkey_by_type;
	kex->host_key_index=&get_hostkey_index;

	xxx_kex = kex;

	dispatch_run(DISPATCH_BLOCK, &kex->done, kex);

	session_id2 = kex->session_id;
	session_id2_len = kex->session_id_len;

#ifdef DEBUG_KEXDH
	/* send 1st encrypted/maced/compressed message */
	packet_start(SSH2_MSG_IGNORE);
	packet_put_cstring("markus");
	packet_send();
	packet_write_wait();
#endif
	debug("KEX done");
}

/* server specific fatal cleanup */
void
cleanup_exit(int i)
{
	if (the_authctxt)
		do_cleanup(the_authctxt);
#ifdef SSH_AUDIT_EVENTS
	/* done after do_cleanup so it can cancel the PAM auth 'thread' */
	if (!use_privsep || mm_is_monitor())
		audit_event(SSH_CONNECTION_ABANDON);
#endif
	_exit(i);
}