blob: 0c47bb66c19996e2fe6af72336af5c1ad5e5985e [file] [log] [blame]
Tom Rinida58dec2015-11-10 01:06:16 +00001#
2# SPDX-License-Identifier: GPL-2.0+
3#
4
Tom Rini3d482542015-11-16 20:29:51 -05005VERSION = 2016
Tom Rinib104b3d2016-06-06 17:43:54 -04006PATCHLEVEL = 07
Wolfgang Denk211e4752012-07-10 09:21:12 +02007SUBLEVEL =
Tom Rini46fd6252016-06-20 11:14:12 -04008EXTRAVERSION = -rc2
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09009NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +010010
Masahiro Yamada6825a952014-02-04 17:24:28 +090011# *DOCUMENTATION*
12# To see a list of typical targets execute "make help"
13# More info can be located in ./README
14# Comments in this file are targeted only to the developer, do not
15# expect to learn how to build the kernel reading this file.
16
Masahiro Yamada4d713be2015-07-05 01:56:57 +090017# o Do not use make's built-in rules and variables
18# (this increases performance and avoids hard-to-debug behaviour);
19# o Look for make include files relative to root of kernel src
20MAKEFLAGS += -rR --include-dir=$(CURDIR)
Masahiro Yamada6825a952014-02-04 17:24:28 +090021
22# Avoid funny character set dependencies
23unexport LC_ALL
24LC_COLLATE=C
25LC_NUMERIC=C
26export LC_COLLATE LC_NUMERIC
27
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090028# Avoid interference with shell env settings
29unexport GREP_OPTIONS
30
Masahiro Yamada6825a952014-02-04 17:24:28 +090031# We are using a recursive build, so we need to do a little thinking
32# to get the ordering right.
33#
34# Most importantly: sub-Makefiles should only ever modify files in
35# their own directory. If in some directory we have a dependency on
36# a file in another dir (which doesn't happen often, but it's often
37# unavoidable when linking the built-in.o targets which finally
38# turn into vmlinux), we will call a sub make in that other dir, and
39# after that we are sure that everything which is in that other dir
40# is now up to date.
41#
42# The only cases where we need to modify files which have global
43# effects are thus separated out and done before the recursive
44# descending is started. They are now explicitly listed as the
45# prepare rule.
46
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090047# Beautify output
48# ---------------------------------------------------------------------------
49#
50# Normally, we echo the whole command before executing it. By making
51# that echo $($(quiet)$(cmd)), we now have the possibility to set
52# $(quiet) to choose other forms of output instead, e.g.
53#
54# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
55# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
56#
57# If $(quiet) is empty, the whole command will be printed.
58# If it is set to "quiet_", only the short version will be printed.
59# If it is set to "silent_", nothing will be printed at all, since
60# the variable $(silent_cmd_cc_o_c) doesn't exist.
61#
62# A simple variant is to prefix commands with $(Q) - that's useful
63# for commands that shall be hidden in non-verbose mode.
64#
65# $(Q)ln $@ :<
66#
67# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
68# If KBUILD_VERBOSE equals 1 then the above command is displayed.
69#
Masahiro Yamada6825a952014-02-04 17:24:28 +090070# To put more focus on warnings, be less verbose as default
71# Use 'make V=1' to see the full commands
72
73ifeq ("$(origin V)", "command line")
74 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000075endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090076ifndef KBUILD_VERBOSE
77 KBUILD_VERBOSE = 0
78endif
79
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090080ifeq ($(KBUILD_VERBOSE),1)
81 quiet =
82 Q =
83else
84 quiet=quiet_
85 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +090086endif
87
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090088# If the user is running make -s (silent mode), suppress echoing of
89# commands
90
91ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
92ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
93 quiet=silent_
94endif
95else # make-3.8x
96ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
97 quiet=silent_
98endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090099endif
100
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900101export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900102
Masahiro Yamada9e414032014-02-04 17:24:24 +0900103# kbuild supports saving output files in a separate directory.
104# To locate output files in a separate directory two syntaxes are supported.
105# In both cases the working directory must be the root of the kernel src.
106# 1) O=
107# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200108#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900109# 2) Set KBUILD_OUTPUT
110# Set the environment variable KBUILD_OUTPUT to point to the directory
111# where the output files shall be placed.
112# export KBUILD_OUTPUT=dir/to/store/output/files/
113# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200114#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900115# The O= assignment takes precedence over the KBUILD_OUTPUT environment
116# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000117
Masahiro Yamada9e414032014-02-04 17:24:24 +0900118# KBUILD_SRC is set on invocation of make in OBJ directory
119# KBUILD_SRC is not intended to be used by the regular user (for now)
120ifeq ($(KBUILD_SRC),)
121
122# OK, Make called in directory where kernel src resides
123# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200124ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900125 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200126endif
wdenk7ebf7442002-11-02 23:17:16 +0000127
Masahiro Yamada9e414032014-02-04 17:24:24 +0900128# That's our default target when none is given on the command line
129PHONY := _all
130_all:
131
132# Cancel implicit rules on top Makefile
133$(CURDIR)/Makefile Makefile: ;
134
135ifneq ($(KBUILD_OUTPUT),)
136# Invoke a second make in the output directory, passing relevant variables
137# check that the output directory actually exists
138saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900139KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
140 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900141$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900142 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900143
144PHONY += $(MAKECMDGOALS) sub-make
145
146$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
147 @:
148
149sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900150 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
151 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900152
153# Leave processing to above invocation of make
154skip-makefile := 1
155endif # ifneq ($(KBUILD_OUTPUT),)
156endif # ifeq ($(KBUILD_SRC),)
157
158# We process the rest of the Makefile if this is the final invocation of make
159ifeq ($(skip-makefile),)
160
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900161# Do not print "Entering directory ...",
162# but we want to display it when entering to the output directory
163# so that IDEs/editors are able to understand relative filenames.
164MAKEFLAGS += --no-print-directory
165
166# Call a source code checker (by default, "sparse") as part of the
167# C compilation.
168#
169# Use 'make C=1' to enable checking of only re-compiled files.
170# Use 'make C=2' to enable checking of *all* source files, regardless
171# of whether they are re-compiled or not.
172#
173# See the file "Documentation/sparse.txt" for more details, including
174# where to get the "sparse" utility.
175
176ifeq ("$(origin C)", "command line")
177 KBUILD_CHECKSRC = $(C)
178endif
179ifndef KBUILD_CHECKSRC
180 KBUILD_CHECKSRC = 0
181endif
182
183# Use make M=dir to specify directory of external module to build
184# Old syntax make ... SUBDIRS=$PWD is still supported
185# Setting the environment variable KBUILD_EXTMOD take precedence
186ifdef SUBDIRS
187 KBUILD_EXTMOD ?= $(SUBDIRS)
188endif
189
190ifeq ("$(origin M)", "command line")
191 KBUILD_EXTMOD := $(M)
192endif
193
Masahiro Yamada6825a952014-02-04 17:24:28 +0900194# If building an external module we do not care about the all: rule
195# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900196PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900197ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900198_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900199else
200_all: modules
201endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900202
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900203ifeq ($(KBUILD_SRC),)
204 # building in the source tree
205 srctree := .
206else
207 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
208 # building in a subdirectory of the source tree
209 srctree := ..
210 else
211 srctree := $(KBUILD_SRC)
212 endif
213endif
214objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900215src := $(srctree)
216obj := $(objtree)
217
218VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
219
220export srctree objtree VPATH
221
Wolfgang Denk5013c092008-03-02 22:45:33 +0100222# Make sure CDPATH settings don't interfere
223unexport CDPATH
224
Marian Balakowiczf9328632006-09-01 19:49:50 +0200225#########################################################################
226
wdenk7ebf7442002-11-02 23:17:16 +0000227HOSTARCH := $(shell uname -m | \
228 sed -e s/i.86/x86/ \
229 -e s/sun4u/sparc64/ \
230 -e s/arm.*/arm/ \
231 -e s/sa110/arm/ \
232 -e s/ppc64/powerpc/ \
233 -e s/ppc/powerpc/ \
234 -e s/macppc/powerpc/\
235 -e s/sh.*/sh/)
236
237HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
238 sed -e 's/\(cygwin\).*/cygwin/')
239
240export HOSTARCH HOSTOS
241
wdenk7ebf7442002-11-02 23:17:16 +0000242#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200243
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400244# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100245ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400246CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000247endif
wdenk7ebf7442002-11-02 23:17:16 +0000248
Masahiro Yamada51148792014-07-30 14:08:17 +0900249KCONFIG_CONFIG ?= .config
250export KCONFIG_CONFIG
251
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900252# SHELL used by kbuild
253CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
254 else if [ -x /bin/bash ]; then echo /bin/bash; \
255 else echo sh; fi ; fi)
256
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200257HOSTCC = cc
258HOSTCXX = c++
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900259HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900260HOSTCXXFLAGS = -O2
261
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900262ifeq ($(HOSTOS),cygwin)
263HOSTCFLAGS += -ansi
264endif
265
266# Mac OS X / Darwin's C preprocessor is Apple specific. It
267# generates numerous errors and warnings. We want to bypass it
268# and use GNU C's cpp. To do this we pass the -traditional-cpp
269# option to the compiler. Note that the -traditional-cpp flag
270# DOES NOT have the same semantics as GNU C's flag, all it does
271# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
272#
273# Apple's linker is similar, thanks to the new 2 stage linking
274# multiple symbol definitions are treated as errors, hence the
275# -multiply_defined suppress option to turn off this error.
276#
277ifeq ($(HOSTOS),darwin)
278# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
279DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
280DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
281
282os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
283 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
284
285# Snow Leopards build environment has no longer restrictions as described above
286HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
287HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
288HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100289
290# since Lion (10.7) ASLR is on by default, but we use linker generated lists
291# in some host tools which is a problem then ... so disable ASLR for these
292# tools
293HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900294endif
295
Masahiro Yamada6825a952014-02-04 17:24:28 +0900296# Decide whether to build built-in, modular, or both.
297# Normally, just do built-in.
298
299KBUILD_MODULES :=
300KBUILD_BUILTIN := 1
301
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900302# If we have only "make modules", don't compile built-in objects.
303# When we're building modules with modversions, we need to consider
304# the built-in objects during the descend as well, in order to
305# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900306
307ifeq ($(MAKECMDGOALS),modules)
308 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
309endif
310
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900311# If we have "make <whatever> modules", compile modules
312# in addition to whatever we do anyway.
313# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900314
315# U-Boot does not need modules
316#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
317# KBUILD_MODULES := 1
318#endif
319
320#ifeq ($(MAKECMDGOALS),)
321# KBUILD_MODULES := 1
322#endif
323
324export KBUILD_MODULES KBUILD_BUILTIN
325export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
326
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900327# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900328scripts/Kbuild.include: ;
329include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900330
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900331# Make variables (CC, etc...)
332
333AS = $(CROSS_COMPILE)as
334# Always use GNU ld
335ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
336LD = $(CROSS_COMPILE)ld.bfd
337else
338LD = $(CROSS_COMPILE)ld
339endif
340CC = $(CROSS_COMPILE)gcc
341CPP = $(CC) -E
342AR = $(CROSS_COMPILE)ar
343NM = $(CROSS_COMPILE)nm
344LDR = $(CROSS_COMPILE)ldr
345STRIP = $(CROSS_COMPILE)strip
346OBJCOPY = $(CROSS_COMPILE)objcopy
347OBJDUMP = $(CROSS_COMPILE)objdump
348AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900349PERL = perl
Masahiro Yamada51148792014-07-30 14:08:17 +0900350PYTHON = python
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900351DTC = dtc
352CHECK = sparse
353
354CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
355 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
356
Masahiro Yamada3b612972014-08-31 15:16:53 +0900357KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900358
359KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
360 -Wno-format-security \
361 -fno-builtin -ffreestanding
362KBUILD_AFLAGS := -D__ASSEMBLY__
363
Masahiro Yamada74241452014-02-24 11:12:09 +0900364# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
365UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
366UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900367
Masahiro Yamada74241452014-02-24 11:12:09 +0900368export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900369export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900370export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
371export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
Masahiro Yamada51148792014-07-30 14:08:17 +0900372export MAKE AWK PERL PYTHON
Masahiro Yamada15c939f2014-06-06 10:15:27 +0900373export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900374
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900375export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900376export KBUILD_CFLAGS KBUILD_AFLAGS
377
Masahiro Yamada6825a952014-02-04 17:24:28 +0900378# When compiling out-of-tree modules, put MODVERDIR in the module
379# tree rather than in the kernel tree. The kernel tree might
380# even be read-only.
381export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
382
383# Files to ignore in find ... statements
384
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900385export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
386 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
387 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900388export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
389 --exclude CVS --exclude .pc --exclude .hg --exclude .git
390
391# ===========================================================================
392# Rules shared between *config targets and build targets
393
394# Basic helpers built in scripts/
395PHONY += scripts_basic
396scripts_basic:
397 $(Q)$(MAKE) $(build)=scripts/basic
398 $(Q)rm -f .tmp_quiet_recordmcount
399
400# To avoid any implicit rule to kick in, define an empty command.
401scripts/basic/%: scripts_basic ;
402
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900403PHONY += outputmakefile
404# outputmakefile generates a Makefile in the output directory, if using a
405# separate output directory. This allows convenient use of make in the
406# output directory.
407outputmakefile:
408ifneq ($(KBUILD_SRC),)
409 $(Q)ln -fsn $(srctree) source
410 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
411 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
412endif
413
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900414# To make sure we do not include .config for any of the *config targets
415# catch them early, and hand them over to scripts/kconfig/Makefile
416# It is allowed to specify more targets when calling make, including
417# mixing *config targets and build targets.
418# For example 'make oldconfig all'.
419# Detect when mixed targets is specified, and make a second invocation
420# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900421
Masahiro Yamada74241452014-02-24 11:12:09 +0900422version_h := include/generated/version_autogenerated.h
423timestamp_h := include/generated/timestamp_autogenerated.h
424
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900425no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900426 help %docs check% coccicheck \
Tom Rinic7ad5cb2014-10-13 08:38:55 -0400427 ubootversion backup
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900428
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900429config-targets := 0
430mixed-targets := 0
431dot-config := 1
432
433ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
434 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
435 dot-config := 0
436 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900437endif
438
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900439ifeq ($(KBUILD_EXTMOD),)
440 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
441 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900442 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900443 mixed-targets := 1
444 endif
445 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900446endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900447
448ifeq ($(mixed-targets),1)
449# ===========================================================================
450# We're called with mixed targets (*config and build targets).
451# Handle them one by one.
452
Masahiro Yamadae7734402014-08-05 15:56:44 +0900453PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900454
Masahiro Yamadae7734402014-08-05 15:56:44 +0900455$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900456 @:
457
Masahiro Yamadae7734402014-08-05 15:56:44 +0900458__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900459 $(Q)set -e; \
460 for i in $(MAKECMDGOALS); do \
461 $(MAKE) -f $(srctree)/Makefile $$i; \
462 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900463
464else
465ifeq ($(config-targets),1)
466# ===========================================================================
467# *config targets only - make sure prerequisites are updated, and descend
468# in scripts/kconfig to make the *config target
469
Masahiro Yamada51148792014-07-30 14:08:17 +0900470KBUILD_DEFCONFIG := sandbox_defconfig
471export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900472
Masahiro Yamada51148792014-07-30 14:08:17 +0900473config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900474 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900475
476%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900477 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900478
479else
480# ===========================================================================
481# Build targets only - this includes vmlinux, arch specific targets, clean
482# targets and others. In general all targets except *config targets.
483
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900484ifeq ($(dot-config),1)
485# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900486-include include/config/auto.conf
487
488# Read in dependencies to all Kconfig* files, make sure to run
489# oldconfig if changes are detected.
490-include include/config/auto.conf.cmd
491
492# To avoid any implicit rule to kick in, define an empty command
493$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
494
495# If .config is newer than include/config/auto.conf, someone tinkered
496# with it and forgot to run make oldconfig.
497# if auto.conf.cmd is missing then we are probably in a cleaned tree so
498# we execute the config step to be sure to catch updated Kconfig files
499include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
500 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900501 @# If the following part fails, include/config/auto.conf should be
502 @# deleted so "make silentoldconfig" will be re-run on the next build.
503 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
504 { rm -f include/config/auto.conf; false; }
505 @# include/config.h has been updated after "make silentoldconfig".
506 @# We need to touch include/config/auto.conf so it gets newer
507 @# than include/config.h.
508 @# Otherwise, 'make silentoldconfig' would be invoked twice.
509 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900510
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900511-include include/autoconf.mk
512-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900513
Masahiro Yamada51148792014-07-30 14:08:17 +0900514# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
515# is up-to-date. When we switch to a different board configuration, old CONFIG
516# macros are still remaining in include/config/auto.conf. Without the following
517# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900518ifneq ($(wildcard $(KCONFIG_CONFIG)),)
519ifneq ($(wildcard include/config/auto.conf),)
520autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
521 include/config/auto.conf)
522ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900523include config.mk
524include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900525endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900526endif
527endif
Simon Glassfada9e22013-04-20 08:42:36 +0000528
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000529# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
530# that (or fail if absent). Otherwise, search for a linker script in a
531# standard location.
532
533ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900534 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000535 ifdef CONFIG_SYS_LDSCRIPT
536 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900537 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000538 endif
539endif
540
Simon Glassee601972011-11-21 10:49:37 +0000541# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000542ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000543 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900544 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000545 endif
546 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900547 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000548 endif
549 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900550 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000551 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000552endif
553
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900554else
Masahiro Yamada51148792014-07-30 14:08:17 +0900555# Dummy target needed, because used as prerequisite
556include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900557endif # $(dot-config)
558
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900559ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
560KBUILD_CFLAGS += -Os
561else
562KBUILD_CFLAGS += -O2
563endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900564
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900565KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530566KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900567
568KBUILD_CFLAGS += -g
569# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
570# option to the assembler.
571KBUILD_AFLAGS += -g
572
573# Report stack usage if supported
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900574ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
575 KBUILD_CFLAGS += -fstack-usage
576endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900577
578KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
579
580# turn jbsr into jsr for m68k
581ifeq ($(ARCH),m68k)
582ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
583KBUILD_AFLAGS += -Wa,-gstabs,-S
584endif
585endif
586
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900587# Prohibit date/time macros, which would make the build non-deterministic
588KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
589
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900590include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900591
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900592# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
593KBUILD_CPPFLAGS += $(KCPPFLAGS)
594KBUILD_AFLAGS += $(KAFLAGS)
595KBUILD_CFLAGS += $(KCFLAGS)
596
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900597# Use UBOOTINCLUDE when you must reference the include/ directory.
598# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900599UBOOTINCLUDE := \
600 -Iinclude \
601 $(if $(KBUILD_SRC), -I$(srctree)/include) \
Albert ARIBAUD62e92072015-10-23 18:06:40 +0200602 $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
603 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
Masahiro Yamada51148792014-07-30 14:08:17 +0900604 -I$(srctree)/arch/$(ARCH)/include \
605 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900606
607NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
608CHECKFLAGS += $(NOSTDINC_FLAGS)
609
610# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900611cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
612 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900613c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
614
wdenk7ebf7442002-11-02 23:17:16 +0000615#########################################################################
616# U-Boot objects....order is important (i.e. start must be first)
617
Masahiro Yamada9e414032014-02-04 17:24:24 +0900618HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200619
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900620libs-y += lib/
621libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900622libs-$(CONFIG_OF_EMBED) += dts/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900623libs-y += fs/
624libs-y += net/
625libs-y += disk/
626libs-y += drivers/
627libs-y += drivers/dma/
628libs-y += drivers/gpio/
629libs-y += drivers/i2c/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900630libs-y += drivers/mmc/
631libs-y += drivers/mtd/
632libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
633libs-y += drivers/mtd/onenand/
634libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
635libs-y += drivers/mtd/spi/
636libs-y += drivers/net/
637libs-y += drivers/net/phy/
638libs-y += drivers/pci/
639libs-y += drivers/power/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900640 drivers/power/fuel_gauge/ \
641 drivers/power/mfd/ \
642 drivers/power/pmic/ \
Przemyslaw Marczakaf41e8d2015-04-20 20:07:42 +0200643 drivers/power/battery/ \
644 drivers/power/regulator/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900645libs-y += drivers/spi/
646libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
647libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Dinh Nguyen9bbd2132015-06-02 22:52:48 -0500648libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900649libs-y += drivers/serial/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530650libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530651libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600652libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900653libs-y += drivers/usb/eth/
654libs-y += drivers/usb/gadget/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530655libs-y += drivers/usb/gadget/udc/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900656libs-y += drivers/usb/host/
657libs-y += drivers/usb/musb/
658libs-y += drivers/usb/musb-new/
659libs-y += drivers/usb/phy/
660libs-y += drivers/usb/ulpi/
Simon Glass72a8cf82016-01-17 20:53:51 -0700661libs-y += cmd/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900662libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900663libs-$(CONFIG_API) += api/
664libs-$(CONFIG_HAS_POST) += post/
665libs-y += test/
Simon Glass2e7d35d2014-02-26 15:59:21 -0700666libs-y += test/dm/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500667libs-$(CONFIG_UT_ENV) += test/env/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200668
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900669libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900670
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900671libs-y := $(sort $(libs-y))
672
673u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
674
675u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
676
677libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
678
679u-boot-init := $(head-y)
680u-boot-main := $(libs-y)
681
wdenka8c7c702003-12-06 19:49:23 +0000682
wdenk4f7cb082003-09-11 23:06:34 +0000683# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900684ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900685PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200686else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900687PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200688endif
689PLATFORM_LIBS += $(PLATFORM_LIBGCC)
690export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400691export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000692
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400693# Special flags for CPP when processing the linker script.
694# Pass the version down so we can handle backwards compatibility
695# on the fly.
696LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900697 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000698 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400699 $(shell $(LD) --version | \
700 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
701
wdenk7ebf7442002-11-02 23:17:16 +0000702#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000703#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000704
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400705ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
706BOARD_SIZE_CHECK = \
707 @actual=`wc -c $@ | awk '{print $$1}'`; \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000708 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400709 if test $$actual -gt $$limit; then \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000710 echo "$@ exceeds file size limit:" >&2 ; \
711 echo " limit: $$limit bytes" >&2 ; \
712 echo " actual: $$actual bytes" >&2 ; \
713 echo " excess: $$((actual - limit)) bytes" >&2; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400714 exit 1; \
715 fi
716else
717BOARD_SIZE_CHECK =
718endif
719
Scott Wood8137af12013-12-14 11:47:32 +0800720# Statically apply RELA-style relocations (currently arm64 only)
721ifneq ($(CONFIG_STATIC_RELA),)
722# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
723DO_STATIC_RELA = \
724 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
725 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900726 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800727else
728DO_STATIC_RELA =
729endif
730
Mike Frysinger3e883372009-06-15 00:25:19 -0400731# Always append ALL so that arch config.mk's can add custom ones
Stephen Warren7ed48482016-02-08 14:44:15 -0700732ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map u-boot.cfg binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500733
Masahiro Yamada9e414032014-02-04 17:24:24 +0900734ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530735ifeq ($(CONFIG_SPL_FSL_PBL),y)
736ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
737else
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530738ifneq ($(CONFIG_SECURE_BOOT), y)
739# For Secure Boot The Image needs to be signed and Header must also
740# be included. So The image has to be built explicitly
Masahiro Yamada9e414032014-02-04 17:24:24 +0900741ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530742endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530743endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900744ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
745ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
746ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Simon Glassad1ecd22016-01-31 18:10:50 -0700747ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
Masahiro Yamada2405d092014-05-15 20:37:51 +0900748ifeq ($(CONFIG_SPL_FRAMEWORK),y)
749ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
750endif
Simon Glass714a5622014-02-26 15:59:14 -0700751ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000752ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900753ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000754endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900755ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
Simon Glass08aeb8b2015-08-04 12:33:43 -0600756ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
Simon Glass476476e2015-08-04 12:33:52 -0600757ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000758
Simon Glasseea0f112015-01-27 22:13:32 -0700759ifneq ($(BUILD_ROM),)
760ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
761endif
Simon Glassfce7b272014-11-12 22:42:08 -0700762
Allen Martin12b7b702012-08-31 08:30:12 +0000763# enable combined SPL/u-boot/dtb rules for tegra
Simon Glass580cc032016-01-31 18:10:49 -0700764ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
Simon Glassa9d78262016-01-31 18:10:52 -0700765ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
Simon Glass580cc032016-01-31 18:10:49 -0700766ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530767endif
Allen Martin12b7b702012-08-31 08:30:12 +0000768
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200769# Add optional build target if defined in board/cpu/soc headers
770ifneq ($(CONFIG_BUILD_TARGET),)
771ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
772endif
773
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900774LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900775ifneq ($(CONFIG_SYS_TEXT_BASE),)
776LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
777endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900778
Simon Glasse020c882015-07-31 09:31:23 -0600779# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900780quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -0600781cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
782 $(OBJCOPYFLAGS_$(@F)) $< $@
783
784# Provide a version which does not do this, for use by EFI
785quiet_cmd_zobjcopy = OBJCOPY $@
786cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900787
Simon Glass476476e2015-08-04 12:33:52 -0600788quiet_cmd_efipayload = OBJCOPY $@
789cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
790
Marek Vasutb97241b2014-03-14 05:00:14 +0100791quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900792cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
793 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
794
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900795quiet_cmd_cat = CAT $@
796cmd_cat = cat $(filter-out $(PHONY), $^) > $@
797
Masahiro Yamada982a1192014-02-24 11:12:17 +0900798append = cat $(filter-out $< $(PHONY), $^) >> $@
799
800quiet_cmd_pad_cat = CAT $@
801cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
802
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900803all: $(ALL-y)
Simon Glass73845352015-01-12 18:02:08 -0700804ifeq ($(CONFIG_DM_I2C_COMPAT),y)
805 @echo "===================== WARNING ======================"
806 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
807 @echo "(possibly in a subsequent patch in your series)"
808 @echo "before sending patches to the mailing list."
809 @echo "===================================================="
810endif
wdenk7ebf7442002-11-02 23:17:16 +0000811
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900812PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +0900813dtbs: dts/dt.dtb
814 @:
815dts/dt.dtb: checkdtc u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900816 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +0000817
Simon Glassad1ecd22016-01-31 18:10:50 -0700818quiet_cmd_copy = COPY $@
819 cmd_copy = cp $< $@
820
821ifeq ($(CONFIG_OF_SEPARATE),y)
822u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900823 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +0000824
Simon Glassad1ecd22016-01-31 18:10:50 -0700825u-boot.bin: u-boot-dtb.bin FORCE
826 $(call if_changed,copy)
827else
828u-boot.bin: u-boot-nodtb.bin FORCE
829 $(call if_changed,copy)
830endif
831
Stefano Babice64348f2014-03-31 09:50:35 +0200832%.imx: %.bin
833 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
834
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900835u-boot.dtb: dts/dt.dtb
836 $(call cmd,copy)
837
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900838OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +0000839
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900840OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +0000841
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900842u-boot.hex u-boot.srec: u-boot FORCE
843 $(call if_changed,objcopy)
844
Simon Glassad1ecd22016-01-31 18:10:50 -0700845OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Simon Glassfce7b272014-11-12 22:42:08 -0700846 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900847
Simon Glassad1ecd22016-01-31 18:10:50 -0700848binary_size_check: u-boot-nodtb.bin FORCE
849 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200850 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -0600851 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200852 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -0600853 | bc); \
Simon Glass89742922014-06-02 22:04:47 -0600854 if [ "" != "$$map_size" ]; then \
855 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200856 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -0700857 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -0600858 exit 1; \
859 fi \
860 fi
861
Simon Glassad1ecd22016-01-31 18:10:50 -0700862u-boot-nodtb.bin: u-boot FORCE
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900863 $(call if_changed,objcopy)
864 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
865 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +0000866
Masahiro Yamada9e414032014-02-04 17:24:24 +0900867u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -0400868 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +0800869 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400870 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500871
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900872OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -0500873
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900874OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
875
876u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
877 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500878
Stefan Roeseb40bda62012-08-16 17:54:52 +0200879#
880# U-Boot entry point, needed for booting of full-blown U-Boot
881# from the SPL U-Boot version.
882#
883ifndef CONFIG_SYS_UBOOT_START
884CONFIG_SYS_UBOOT_START := 0
885endif
886
Simon Glass741e58e2015-02-05 22:06:10 -0700887# Create a file containing the configuration options the image was built with
888quiet_cmd_cpp_cfg = CFG $@
889cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
Masahiro Yamada31134712015-05-26 12:51:25 +0900890 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
Simon Glass741e58e2015-02-05 22:06:10 -0700891
Simon Glasscdf17242016-02-22 22:55:57 -0700892ifdef CONFIG_SPL_LOAD_FIT
893MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
894 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
895 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Andreas Bießmann7a439ca2016-05-01 03:01:27 +0200896 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -0700897else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900898MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
899 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
900 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Simon Glasscdf17242016-02-22 22:55:57 -0700901endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900902
Simon Glassdae6e7b2016-01-31 18:10:54 -0700903MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
904
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +0900905MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
906 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900907
Stefan Roesea90ffb52015-01-19 11:33:45 +0100908MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
Stefan Roese944c7a32015-08-25 13:49:41 +0200909 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Stefan Roesea90ffb52015-01-19 11:33:45 +0100910
Masahiro Yamadae4536f82014-03-11 11:05:16 +0900911MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
912 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900913
Simon Glasscdf17242016-02-22 22:55:57 -0700914u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
915 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900916 $(call if_changed,mkimage)
wdenkbdccc4f2003-08-05 17:43:17 +0000917
Simon Glass73c5c392016-01-31 18:10:55 -0700918u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +0100919 $(call if_changed,mkimage)
920
Masahiro Yamada9e414032014-02-04 17:24:24 +0900921u-boot.sha1: u-boot.bin
922 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +0200923
Masahiro Yamada9e414032014-02-04 17:24:24 +0900924u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +0000925 $(OBJDUMP) -d $< > $@
926
Masahiro Yamada514ec432016-02-05 17:55:13 +0900927u-boot.cfg: include/config.h FORCE
Simon Glass741e58e2015-02-05 22:06:10 -0700928 $(call if_changed,cpp_cfg)
929
Ying Zhang3aa29de2013-08-16 15:16:15 +0800930ifdef CONFIG_TPL
Masahiro Yamada9e414032014-02-04 17:24:24 +0900931SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800932else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900933SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800934endif
Scott Wood74752ba2012-12-06 13:33:16 +0000935
Masahiro Yamada982a1192014-02-24 11:12:17 +0900936OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
937 --pad-to=$(CONFIG_SPL_PAD_TO)
938u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
939 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +0800940
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200941MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
942
943lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
944 $(call if_changed,mkimage)
945
946OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
947
Masahiro Yamada514ec432016-02-05 17:55:13 +0900948lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200949 $(call if_changed,objcopy)
950
951OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
952
Masahiro Yamada514ec432016-02-05 17:55:13 +0900953lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200954 $(call if_changed,objcopy)
955
Masahiro Yamada514ec432016-02-05 17:55:13 +0900956lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200957 $(call if_changed,cat)
958
959CLEAN_FILES += lpc32xx-*
960
Masahiro Yamada982a1192014-02-24 11:12:17 +0900961OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
962 --pad-to=$(CONFIG_TPL_PAD_TO)
963tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
964 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +0000965
Masahiro Yamada630d2342014-02-24 11:12:21 +0900966SPL: spl/u-boot-spl.bin FORCE
967 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
968
969u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
Masahiro Yamada4e0c8ab2014-02-24 11:12:20 +0900970 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +0000971
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900972MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
973
974u-boot.ubl: u-boot-with-spl.bin FORCE
975 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +0000976
Masahiro Yamada982a1192014-02-24 11:12:17 +0900977MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
978 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
979 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
980spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
981 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +0000982
Christian Riesch532d5312014-05-07 10:16:28 +0200983OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900984u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
985 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +0000986
Marek Vasut1a9df132014-04-03 19:12:21 +0200987u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
988 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900989u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +0900990 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +0000991
Stefan Roese94aebe62012-01-05 11:19:50 +0100992# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
993# Both images are created using mkimage (crc etc), so that the ROM
994# bootloader can check its integrity. Padding needs to be done to the
995# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
996# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
997# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +0900998MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
999 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1000spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1001 $(call if_changed,mkimage)
1002
1003OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1004 --gap-fill=0xff
1005u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1006 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +01001007
Marek Vasut333b7202015-07-15 02:53:45 +02001008ifneq ($(CONFIG_ARCH_SOCFPGA),)
1009quiet_cmd_socboot = SOCBOOT $@
Simon Glassbd7dc382016-01-31 18:10:53 -07001010cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1011 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1012 u-boot.img > $@ || rm -f $@
1013u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001014 $(call if_changed,socboot)
1015endif
1016
Simon Glassfce7b272014-11-12 22:42:08 -07001017# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1018# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1019# the middle.
1020ifneq ($(CONFIG_X86_RESET_VECTOR),)
1021rom: u-boot.rom FORCE
1022
Bin Mengc7016232014-12-12 21:05:21 +08001023IFDTOOL=$(objtree)/tools/ifdtool
Simon Glass0f61de82014-12-17 15:50:37 +08001024IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
1025IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
Simon Glassad1ecd22016-01-31 18:10:50 -07001026IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
Bin Mengc7016232014-12-12 21:05:21 +08001027IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
Simon Glassb0980322015-08-15 14:37:53 -06001028IFDTOOL_FLAGS += -C
Bin Mengc7016232014-12-12 21:05:21 +08001029
1030ifneq ($(CONFIG_HAVE_INTEL_ME),)
1031IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
1032IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
1033endif
1034
1035ifneq ($(CONFIG_HAVE_MRC),)
Bin Meng8c5224c2014-12-17 15:50:42 +08001036IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
Bin Mengc7016232014-12-12 21:05:21 +08001037endif
1038
Bin Meng63faf252014-12-17 15:50:43 +08001039ifneq ($(CONFIG_HAVE_FSP),)
1040IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
1041endif
1042
1043ifneq ($(CONFIG_HAVE_CMC),)
1044IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
1045endif
1046
Bin Meng786a08e2015-07-06 16:31:33 +08001047ifneq ($(CONFIG_HAVE_VGA_BIOS),)
1048IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
Bin Mengc7016232014-12-12 21:05:21 +08001049endif
1050
Simon Glass0adf8d32016-03-11 22:07:16 -07001051ifneq ($(CONFIG_HAVE_REFCODE),)
1052IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
1053endif
1054
Bin Mengc7016232014-12-12 21:05:21 +08001055quiet_cmd_ifdtool = IFDTOOL $@
1056cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
1057ifneq ($(CONFIG_HAVE_INTEL_ME),)
1058cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
1059endif
1060cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
1061cmd_ifdtool += mv u-boot.tmp $@
1062
Simon Glass0adf8d32016-03-11 22:07:16 -07001063refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1064 $(call if_changed,copy)
1065
1066quiet_cmd_ldr = LD $@
1067cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1068 $(filter-out FORCE,$^) -o $@
1069
1070u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
1071 $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
Bin Mengc7016232014-12-12 21:05:21 +08001072 $(call if_changed,ifdtool)
Simon Glassfce7b272014-11-12 22:42:08 -07001073
1074OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1075u-boot-x86-16bit.bin: u-boot FORCE
1076 $(call if_changed,objcopy)
1077endif
1078
Ian Campbell50827a52014-05-05 11:52:30 +01001079ifneq ($(CONFIG_SUNXI),)
1080OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
1081 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
Simon Glass73c5c392016-01-31 18:10:55 -07001082u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
Ian Campbell50827a52014-05-05 11:52:30 +01001083 $(call if_changed,pad_cat)
1084endif
1085
Tom Warren6d6c0ba2012-12-11 13:34:17 +00001086ifneq ($(CONFIG_TEGRA),)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001087OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glassad1ecd22016-01-31 18:10:50 -07001088u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001089 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +00001090
Simon Glassa9d78262016-01-31 18:10:52 -07001091OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glass73c5c392016-01-31 18:10:55 -07001092u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
Simon Glass580cc032016-01-31 18:10:49 -07001093 $(call if_changed,pad_cat)
Simon Glassa9d78262016-01-31 18:10:52 -07001094
1095u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1096 $(call if_changed,copy)
Allen Martin984df4e2012-08-31 08:30:10 +00001097endif
1098
Simon Glass08aeb8b2015-08-04 12:33:43 -06001099OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1100u-boot-app.efi: u-boot FORCE
1101 $(call if_changed,zobjcopy)
1102
Simon Glass73c5c392016-01-31 18:10:55 -07001103u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001104 $(call if_changed,efipayload)
1105
1106u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1107 $(call if_changed_dep,cpp_lds)
1108
1109# Rule to link the EFI payload which contains a stub and a U-Boot binary
1110quiet_cmd_u-boot_payload ?= LD $@
1111 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001112 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001113 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass476476e2015-08-04 12:33:52 -06001114 $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
1115
Simon Glass73c5c392016-01-31 18:10:55 -07001116u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001117 $(call if_changed,u-boot_payload)
1118
1119OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1120u-boot-payload.efi: u-boot-payload FORCE
1121 $(call if_changed,zobjcopy)
1122
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001123u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1124 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001125
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301126#Add a target to create boot binary having SPL binary in PBI format
1127#concatenated with u-boot binary. It is need by PowerPC SoC having
1128#internal SRAM <= 512KB.
1129MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001130 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1131 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301132
1133spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1134 $(call if_changed,mkimage)
1135
Alison Wang45c2e482014-12-03 15:00:42 +08001136ifeq ($(ARCH),arm)
1137UBOOT_BINLOAD := u-boot.img
1138else
1139UBOOT_BINLOAD := u-boot.bin
1140endif
1141
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301142OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1143 --gap-fill=0xff
1144
Alison Wang45c2e482014-12-03 15:00:42 +08001145u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301146 $(call if_changed,pad_cat)
1147
Stefan Roeseecddccd2013-02-22 11:36:50 +01001148# PPC4xx needs the SPL at the end of the image, since the reset vector
1149# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1150# and need to introduce a new build target with the full blown U-Boot
1151# at the start padded up to the start of the SPL image. And then concat
1152# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001153
1154OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1155 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1156u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1157 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001158
Scott Woodf4dc7142013-12-14 11:47:33 +08001159# Create a new ELF from a raw binary file. This is useful for arm64
1160# where static relocation needs to be performed on the raw binary,
1161# but certain simulators only accept an ELF file (but don't do the
1162# relocation).
1163# FIXME refactor dts/Makefile to share target/arch detection
Masahiro Yamada9e414032014-02-04 17:24:24 +09001164u-boot.elf: u-boot.bin
Scott Woodf4dc7142013-12-14 11:47:33 +08001165 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
Masahiro Yamada9e414032014-02-04 17:24:24 +09001166 $< u-boot-elf.o
1167 @$(LD) u-boot-elf.o -o $@ \
Scott Woodf4dc7142013-12-14 11:47:33 +08001168 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
1169 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1170
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001171# Rule to link u-boot
1172# May be overridden by arch/$(ARCH)/config.mk
1173quiet_cmd_u-boot__ ?= LD $@
1174 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1175 -T u-boot.lds $(u-boot-init) \
1176 --start-group $(u-boot-main) --end-group \
1177 $(PLATFORM_LIBS) -Map u-boot.map
Simon Glass86eb49b2011-10-03 19:26:50 +00001178
Vasili Galkacac8f382014-08-14 12:40:55 +03001179quiet_cmd_smap = GEN common/system_map.o
1180cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001181 smap=`$(call SYSTEM_MAP,u-boot) | \
1182 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1183 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1184 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001185
Masahiro Yamada514ec432016-02-05 17:55:13 +09001186u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
Vasili Galkacac8f382014-08-14 12:40:55 +03001187 $(call if_changed,u-boot__)
1188ifeq ($(CONFIG_KALLSYMS),y)
1189 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001190 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001191endif
wdenk7ebf7442002-11-02 23:17:16 +00001192
Stephen Warren7ed48482016-02-08 14:44:15 -07001193quiet_cmd_sym ?= SYM $@
1194 cmd_sym ?= $(OBJDUMP) -t $< > $@
1195u-boot.sym: u-boot FORCE
1196 $(call if_changed,sym)
1197
Michal Simek69c0d322014-04-24 15:24:28 +02001198# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001199# make sure no implicit rule kicks in
1200$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001201
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001202# Handle descending into subdirectories listed in $(vmlinux-dirs)
1203# Preset locale variables to speed up the build process. Limit locale
1204# tweaks to this spot to avoid wrong language settings when running
1205# make menuconfig etc.
1206# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001207
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001208PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001209$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001210 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001211
Masahiro Yamada74241452014-02-24 11:12:09 +09001212tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001213# The "tools" are needed early
1214$(filter-out tools, $(u-boot-dirs)): tools
1215# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1216# is "yes"), so compile examples after U-Boot is compiled.
1217examples: $(filter-out examples, $(u-boot-dirs))
1218
Masahiro Yamada74241452014-02-24 11:12:09 +09001219define filechk_uboot.release
1220 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1221endef
1222
1223# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001224include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001225 $(call filechk,uboot.release)
1226
1227
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001228# Things we need to do before we recursively start building the kernel
1229# or the modules are listed in "prepare".
1230# A multi level approach is used. prepareN is processed before prepareN-1.
1231# archprepare is used in arch Makefiles and when processed asm symlink,
1232# version.h and scripts_basic is processed / created.
1233
1234# Listed in dependency order
1235PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1236
1237# prepare3 is used to check if we are building in a separate output directory,
1238# and if so do:
1239# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001240prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001241ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001242 @$(kecho) ' Using $(srctree) as source for U-Boot'
1243 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001244 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1245 echo >&2 " in the '$(srctree)' directory.";\
1246 /bin/false; \
1247 fi;
1248endif
1249
1250# prepare2 creates a makefile if using a separate output directory
1251prepare2: prepare3 outputmakefile
1252
Masahiro Yamada51148792014-07-30 14:08:17 +09001253prepare1: prepare2 $(version_h) $(timestamp_h) \
1254 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001255ifeq ($(wildcard $(LDSCRIPT)),)
1256 @echo >&2 " Could not find linker script."
1257 @/bin/false
1258endif
wdenk7ebf7442002-11-02 23:17:16 +00001259
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001260archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001261
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001262prepare0: archprepare FORCE
1263 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001264
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001265# All the preparing..
1266prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001267
Masahiro Yamada74241452014-02-24 11:12:09 +09001268# Generate some files
1269# ---------------------------------------------------------------------------
1270
1271define filechk_version.h
1272 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1273 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001274 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1275 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001276endef
1277
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001278# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1279# The BSD date on the other hand behaves different and would produce errors
1280# with the misused '-d' switch. Respect that and search a working date with
1281# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001282define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001283 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1284 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001285 DATE=""; \
1286 for date in gdate date.gnu date; do \
1287 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1288 done; \
1289 if test -n "$${DATE}"; then \
1290 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1291 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1292 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001293 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001294 else \
1295 return 42; \
1296 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12001297 else \
1298 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1299 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1300 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001301 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Chris Packham70d39f52015-08-13 18:08:27 +12001302 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09001303endef
1304
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001305$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001306 $(call filechk,version.h)
1307
1308$(timestamp_h): $(srctree)/Makefile FORCE
1309 $(call filechk,timestamp.h)
1310
Masahiro Yamada63780082014-02-24 11:12:10 +09001311# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001312quiet_cmd_cpp_lds = LDS $@
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001313cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1314 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001315
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001316u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001317 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001318
Masahiro Yamada982a1192014-02-24 11:12:17 +09001319spl/u-boot-spl.bin: spl/u-boot-spl
1320 @:
Simon Glassfa78e0a2015-06-23 15:38:29 -06001321spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09001322 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001323
Ian Campbell50827a52014-05-05 11:52:30 +01001324spl/sunxi-spl.bin: spl/u-boot-spl
1325 @:
1326
Simon Glassbd7dc382016-01-31 18:10:53 -07001327spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02001328 @:
1329
Nathan Rossi08598d62015-11-17 22:56:57 +10001330spl/boot.bin: spl/u-boot-spl
1331 @:
1332
Masahiro Yamada63780082014-02-24 11:12:10 +09001333tpl/u-boot-tpl.bin: tools prepare
Masahiro Yamada51148792014-07-30 14:08:17 +09001334 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
Ying Zhang3aa29de2013-08-16 15:16:15 +08001335
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001336TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001337
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001338FIND := find
1339FINDFLAGS := -L
1340
Marian Balakowiczf9328632006-09-01 19:49:50 +02001341tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001342 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001343 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07001344 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00001345
1346etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001347 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001348 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001349cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001350 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1351 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001352 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001353
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001354SYSTEM_MAP = \
1355 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001356 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001357 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001358System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001359 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001360
Stephen Warren501ebdf2013-07-24 10:09:16 -07001361checkdtc:
1362 @if test $(call dtc-version) -lt 0104; then \
1363 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1364 false; \
1365 fi
1366
wdenk7ebf7442002-11-02 23:17:16 +00001367#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001368
Scott Wood54799e42013-12-14 11:47:34 +08001369# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1370# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001371checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001372 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1373 grep R_A | sort -u`"; \
1374 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1375 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1376 echo "$< contains unexpected relocations: $$RELOC"; \
1377 false; \
1378 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001379
Masahiro Yamada74241452014-02-24 11:12:09 +09001380env: scripts_basic
Masahiro Yamada3f76e982014-02-04 17:24:38 +09001381 $(Q)$(MAKE) $(build)=tools/$@
Mike Frysinger0358df42010-08-15 00:03:21 -04001382
Masahiro Yamada4642e002014-03-31 17:33:51 +09001383tools-only: scripts_basic $(version_h) $(timestamp_h)
1384 $(Q)$(MAKE) $(build)=tools
1385
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09001386tools-all: export HOST_TOOLS_ALL=y
Masahiro Yamada2887c472014-02-04 17:24:39 +09001387tools-all: env tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001388
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09001389cross_tools: export CROSS_BUILD_TOOLS=y
1390cross_tools: tools ;
1391
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001392.PHONY : CHANGELOG
1393CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001394 git log --no-merges U-Boot-1_1_5.. | \
1395 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001396
wdenk7ebf7442002-11-02 23:17:16 +00001397#########################################################################
1398
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001399###
1400# Cleaning is done on three levels.
1401# make clean Delete most generated files
1402# Leave enough to build external modules
1403# make mrproper Delete the current configuration, and all generated files
1404# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001405
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001406# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001407CLEAN_DIRS += $(MODVERDIR) \
1408 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09001409 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001410
Tom Rini8a7367a2016-03-15 12:49:12 -04001411CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
Bo Shen2a507122015-01-15 10:03:53 +08001412 boot* u-boot* MLO* SPL System.map
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001413
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001414# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09001415MRPROPER_DIRS += include/config include/generated spl tpl \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +09001416 .tmp_objdiff
Masahiro Yamada51148792014-07-30 14:08:17 +09001417MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1418 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
wdenk7ebf7442002-11-02 23:17:16 +00001419
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001420# clean - Delete most, but leave enough to build external modules
1421#
1422clean: rm-dirs := $(CLEAN_DIRS)
1423clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001424
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09001425clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001426
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001427clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
wdenk7ebf7442002-11-02 23:17:16 +00001428
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001429PHONY += $(clean-dirs) clean archclean
1430$(clean-dirs):
1431 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1432
1433# TODO: Do not use *.cfgtmp
1434clean: $(clean-dirs)
1435 $(call cmd,rmdirs)
1436 $(call cmd,rmfiles)
1437 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1438 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1439 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1440 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1441 -o -name '*.symtypes' -o -name 'modules.order' \
1442 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Bin Meng0fbdaa02016-05-22 01:45:25 -07001443 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001444 -o -name '*.gcno' \) -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001445
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001446# mrproper - Delete all generated files, including .config
1447#
1448mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1449mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1450mrproper-dirs := $(addprefix _mrproper_,scripts)
1451
1452PHONY += $(mrproper-dirs) mrproper archmrproper
1453$(mrproper-dirs):
1454 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1455
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001456mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001457 $(call cmd,rmdirs)
1458 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09001459 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001460
1461# distclean
1462#
1463PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001464
1465distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001466 @find $(srctree) $(RCS_FIND_IGNORE) \
1467 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1468 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001469 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1470 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001471 -type f -print | xargs rm -f
Roger Meierfd18a892014-08-20 22:10:29 +02001472 @rm -f boards.cfg
wdenk7ebf7442002-11-02 23:17:16 +00001473
1474backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09001475 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001476 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001477
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001478help:
1479 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001480 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001481 @echo ' mrproper - Remove all generated files + config + various backup files'
1482 @echo ' distclean - mrproper + remove editor backup and patch files'
1483 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09001484 @echo 'Configuration targets:'
1485 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1486 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001487 @echo 'Other generic targets:'
1488 @echo ' all - Build all necessary images depending on configuration'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001489 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001490 @echo ' dir/ - Build all files in dir and below'
1491 @echo ' dir/file.[oisS] - Build specified target only'
1492 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1493 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03001494 @echo ' tags/ctags - Generate ctags file for editors'
1495 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001496 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001497 @echo ' ubootrelease - Output the release version string (use with make -s)'
1498 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001499 @echo ''
1500 @echo 'Static analysers'
1501 @echo ' checkstack - Generate a list of stack hogs'
1502 @echo ''
1503 @echo 'Documentation targets:'
1504 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1505 @echo ''
1506 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1507 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1508 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1509 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1510 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1511 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1512 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1513 @echo ' 1: warnings which may be relevant and do not occur too often'
1514 @echo ' 2: warnings which occur quite often but may still be relevant'
1515 @echo ' 3: more obscure warnings, can most likely be ignored'
1516 @echo ' Multiple levels can be combined with W=12 or W=123'
1517 @echo ''
1518 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1519 @echo 'For further info see the ./README file'
1520
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001521
1522# Documentation targets
1523# ---------------------------------------------------------------------------
1524%docs: scripts_basic FORCE
1525 $(Q)$(MAKE) $(build)=scripts build_docproc
1526 $(Q)$(MAKE) $(build)=doc/DocBook $@
1527
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001528# Dummies...
1529PHONY += prepare scripts
1530prepare: ;
1531scripts: ;
Masahiro Yamada9e414032014-02-04 17:24:24 +09001532
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001533endif #ifeq ($(config-targets),1)
1534endif #ifeq ($(mixed-targets),1)
1535
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001536PHONY += checkstack ubootrelease ubootversion
1537
1538checkstack:
1539 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1540 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1541
1542ubootrelease:
1543 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1544
1545ubootversion:
1546 @echo $(UBOOTVERSION)
1547
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001548# Single targets
1549# ---------------------------------------------------------------------------
1550# Single targets are compatible with:
1551# - build with mixed source and output
1552# - build with separate output dir 'make O=...'
1553# - external modules
1554#
1555# target-dir => where to store outputfile
1556# build-dir => directory in kernel source tree to use
1557
1558ifeq ($(KBUILD_EXTMOD),)
1559 build-dir = $(patsubst %/,%,$(dir $@))
1560 target-dir = $(dir $@)
1561else
1562 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1563 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1564 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1565endif
1566
1567%.s: %.c prepare scripts FORCE
1568 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1569%.i: %.c prepare scripts FORCE
1570 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1571%.o: %.c prepare scripts FORCE
1572 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1573%.lst: %.c prepare scripts FORCE
1574 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1575%.s: %.S prepare scripts FORCE
1576 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1577%.o: %.S prepare scripts FORCE
1578 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1579%.symtypes: %.c prepare scripts FORCE
1580 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1581
1582# Modules
1583/: prepare scripts FORCE
1584 $(cmd_crmodverdir)
1585 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1586 $(build)=$(build-dir)
1587%/: prepare scripts FORCE
1588 $(cmd_crmodverdir)
1589 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1590 $(build)=$(build-dir)
1591%.ko: prepare scripts FORCE
1592 $(cmd_crmodverdir)
1593 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1594 $(build)=$(build-dir) $(@:.ko=.o)
1595 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1596
Michal Simek69c0d322014-04-24 15:24:28 +02001597# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001598# ===========================================================================
1599
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001600quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1601 cmd_rmdirs = rm -rf $(rm-dirs)
1602
1603quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1604 cmd_rmfiles = rm -f $(rm-files)
1605
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001606# read all saved command lines
1607
1608targets := $(wildcard $(sort $(targets)))
1609cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1610
1611ifneq ($(cmd_files),)
1612 $(cmd_files): ; # Do not try to update included dependency files
1613 include $(cmd_files)
1614endif
1615
Masahiro Yamada9e414032014-02-04 17:24:24 +09001616endif # skip-makefile
1617
1618PHONY += FORCE
1619FORCE:
1620
1621# Declare the contents of the .PHONY variable as phony. We keep that
1622# information in a variable so we can use it in if_changed and friends.
1623.PHONY: $(PHONY)