llvm/lib/Target/AArch64/AArch64LoadStoreOptimizer.cpp

//=- AArch64LoadStoreOptimizer.cpp - AArch64 load/store opt. pass -*- C++ -*-=//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains a pass that performs load / store related peephole
// optimizations. This pass should be run after register allocation.
//
//===----------------------------------------------------------------------===//

#include "AArch64InstrInfo.h"
#include "AArch64Subtarget.h"
#include "MCTargetDesc/AArch64AddressingModes.h"
#include "llvm/ADT/BitVector.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/CodeGen/MachineBasicBlock.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineInstr.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetInstrInfo.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetRegisterInfo.h"
using namespace llvm;

#define DEBUG_TYPE "aarch64-ldst-opt"

/// AArch64AllocLoadStoreOpt - Post-register allocation pass to combine
/// load / store instructions to form ldp / stp instructions.

STATISTIC(NumPairCreated, "Number of load/store pair instructions generated");
STATISTIC(NumPostFolded, "Number of post-index updates folded");
STATISTIC(NumPreFolded, "Number of pre-index updates folded");
STATISTIC(NumUnscaledPairCreated,
          "Number of load/store from unscaled generated");
STATISTIC(NumSmallTypeMerged, "Number of small type loads merged");

static cl::opt<unsigned> ScanLimit("aarch64-load-store-scan-limit",
                                   cl::init(20), cl::Hidden);

namespace llvm {
void initializeAArch64LoadStoreOptPass(PassRegistry &);
}

#define AARCH64_LOAD_STORE_OPT_NAME "AArch64 load / store optimization pass"

namespace {

typedef struct LdStPairFlags {
  // If a matching instruction is found, MergeForward is set to true if the
  // merge is to remove the first instruction and replace the second with
  // a pair-wise insn, and false if the reverse is true.
  bool MergeForward;

  // SExtIdx gives the index of the result of the load pair that must be
  // extended. The value of SExtIdx assumes that the paired load produces the
  // value in this order: (I, returned iterator), i.e., -1 means no value has
  // to be extended, 0 means I, and 1 means the returned iterator.
  int SExtIdx;

  LdStPairFlags() : MergeForward(false), SExtIdx(-1) {}

  void setMergeForward(bool V = true) { MergeForward = V; }
  bool getMergeForward() const { return MergeForward; }

  void setSExtIdx(int V) { SExtIdx = V; }
  int getSExtIdx() const { return SExtIdx; }

} LdStPairFlags;

struct AArch64LoadStoreOpt : public MachineFunctionPass {
  static char ID;
  AArch64LoadStoreOpt() : MachineFunctionPass(ID) {
    initializeAArch64LoadStoreOptPass(*PassRegistry::getPassRegistry());
  }

  const AArch64InstrInfo *TII;
  const TargetRegisterInfo *TRI;
  const AArch64Subtarget *Subtarget;

  // Scan the instructions looking for a load/store that can be combined
  // with the current instruction into a load/store pair.
  // Return the matching instruction if one is found, else MBB->end().
  MachineBasicBlock::iterator findMatchingInsn(MachineBasicBlock::iterator I,
                                               LdStPairFlags &Flags,
                                               unsigned Limit);
  // Merge the two instructions indicated into a single pair-wise instruction.
  // If MergeForward is true, erase the first instruction and fold its
  // operation into the second. If false, the reverse. Return the instruction
  // following the first instruction (which may change during processing).
  MachineBasicBlock::iterator
  mergePairedInsns(MachineBasicBlock::iterator I,
                   MachineBasicBlock::iterator Paired,
                   const LdStPairFlags &Flags);

  // Scan the instruction list to find a base register update that can
  // be combined with the current instruction (a load or store) using
  // pre or post indexed addressing with writeback. Scan forwards.
  MachineBasicBlock::iterator
  findMatchingUpdateInsnForward(MachineBasicBlock::iterator I, unsigned Limit,
                                int UnscaledOffset);

  // Scan the instruction list to find a base register update that can
  // be combined with the current instruction (a load or store) using
  // pre or post indexed addressing with writeback. Scan backwards.
  MachineBasicBlock::iterator
  findMatchingUpdateInsnBackward(MachineBasicBlock::iterator I, unsigned Limit);

  // Find an instruction that updates the base register of the ld/st
  // instruction.
  bool isMatchingUpdateInsn(MachineInstr *MemMI, MachineInstr *MI,
                            unsigned BaseReg, int Offset);

  // Merge a pre- or post-index base register update into a ld/st instruction.
  MachineBasicBlock::iterator
  mergeUpdateInsn(MachineBasicBlock::iterator I,
                  MachineBasicBlock::iterator Update, bool IsPreIdx);

  // Find and merge foldable ldr/str instructions.
  bool tryToMergeLdStInst(MachineBasicBlock::iterator &MBBI);

  // Check if converting two narrow loads into a single wider load with
  // bitfield extracts could be enabled.
  bool enableNarrowLdMerge(MachineFunction &Fn);

  bool optimizeBlock(MachineBasicBlock &MBB, bool enableNarrowLdOpt);

  bool runOnMachineFunction(MachineFunction &Fn) override;

  const char *getPassName() const override {
    return AARCH64_LOAD_STORE_OPT_NAME;
  }
};
char AArch64LoadStoreOpt::ID = 0;
} // namespace

INITIALIZE_PASS(AArch64LoadStoreOpt, "aarch64-ldst-opt",
                AARCH64_LOAD_STORE_OPT_NAME, false, false)

static bool isUnscaledLdSt(unsigned Opc) {
  switch (Opc) {
  default:
    return false;
  case AArch64::STURSi:
  case AArch64::STURDi:
  case AArch64::STURQi:
  case AArch64::STURWi:
  case AArch64::STURXi:
  case AArch64::LDURSi:
  case AArch64::LDURDi:
  case AArch64::LDURQi:
  case AArch64::LDURWi:
  case AArch64::LDURXi:
  case AArch64::LDURSWi:
  case AArch64::LDURHHi:
    return true;
  }
}

static bool isUnscaledLdSt(MachineInstr *MI) {
  return isUnscaledLdSt(MI->getOpcode());
}

static bool isSmallTypeLdMerge(unsigned Opc) {
  switch (Opc) {
  default:
    return false;
  case AArch64::LDRHHui:
  case AArch64::LDURHHi:
    return true;
    // FIXME: Add other instructions (e.g, LDRBBui, LDURSHWi, LDRSHWui, etc.).
  }
}
static bool isSmallTypeLdMerge(MachineInstr *MI) {
  return isSmallTypeLdMerge(MI->getOpcode());
}

// Scaling factor for unscaled load or store.
static int getMemScale(MachineInstr *MI) {
  switch (MI->getOpcode()) {
  default:
    llvm_unreachable("Opcode has unknown scale!");
  case AArch64::LDRBBui:
  case AArch64::STRBBui:
    return 1;
  case AArch64::LDRHHui:
  case AArch64::LDURHHi:
  case AArch64::STRHHui:
    return 2;
  case AArch64::LDRSui:
  case AArch64::LDURSi:
  case AArch64::LDRSWui:
  case AArch64::LDURSWi:
  case AArch64::LDRWui:
  case AArch64::LDURWi:
  case AArch64::STRSui:
  case AArch64::STURSi:
  case AArch64::STRWui:
  case AArch64::STURWi:
  case AArch64::LDPSi:
  case AArch64::LDPSWi:
  case AArch64::LDPWi:
  case AArch64::STPSi:
  case AArch64::STPWi:
    return 4;
  case AArch64::LDRDui:
  case AArch64::LDURDi:
  case AArch64::LDRXui:
  case AArch64::LDURXi:
  case AArch64::STRDui:
  case AArch64::STURDi:
  case AArch64::STRXui:
  case AArch64::STURXi:
  case AArch64::LDPDi:
  case AArch64::LDPXi:
  case AArch64::STPDi:
  case AArch64::STPXi:
    return 8;
  case AArch64::LDRQui:
  case AArch64::LDURQi:
  case AArch64::STRQui:
  case AArch64::STURQi:
  case AArch64::LDPQi:
  case AArch64::STPQi:
    return 16;
  }
}

static unsigned getMatchingNonSExtOpcode(unsigned Opc,
                                         bool *IsValidLdStrOpc = nullptr) {
  if (IsValidLdStrOpc)
    *IsValidLdStrOpc = true;
  switch (Opc) {
  default:
    if (IsValidLdStrOpc)
      *IsValidLdStrOpc = false;
    return UINT_MAX;
  case AArch64::STRDui:
  case AArch64::STURDi:
  case AArch64::STRQui:
  case AArch64::STURQi:
  case AArch64::STRWui:
  case AArch64::STURWi:
  case AArch64::STRXui:
  case AArch64::STURXi:
  case AArch64::LDRDui:
  case AArch64::LDURDi:
  case AArch64::LDRQui:
  case AArch64::LDURQi:
  case AArch64::LDRWui:
  case AArch64::LDURWi:
  case AArch64::LDRXui:
  case AArch64::LDURXi:
  case AArch64::STRSui:
  case AArch64::STURSi:
  case AArch64::LDRSui:
  case AArch64::LDURSi:
  case AArch64::LDRHHui:
  case AArch64::LDURHHi:
    return Opc;
  case AArch64::LDRSWui:
    return AArch64::LDRWui;
  case AArch64::LDURSWi:
    return AArch64::LDURWi;
  }
}

static unsigned getMatchingPairOpcode(unsigned Opc) {
  switch (Opc) {
  default:
    llvm_unreachable("Opcode has no pairwise equivalent!");
  case AArch64::STRSui:
  case AArch64::STURSi:
    return AArch64::STPSi;
  case AArch64::STRDui:
  case AArch64::STURDi:
    return AArch64::STPDi;
  case AArch64::STRQui:
  case AArch64::STURQi:
    return AArch64::STPQi;
  case AArch64::STRWui:
  case AArch64::STURWi:
    return AArch64::STPWi;
  case AArch64::STRXui:
  case AArch64::STURXi:
    return AArch64::STPXi;
  case AArch64::LDRSui:
  case AArch64::LDURSi:
    return AArch64::LDPSi;
  case AArch64::LDRDui:
  case AArch64::LDURDi:
    return AArch64::LDPDi;
  case AArch64::LDRQui:
  case AArch64::LDURQi:
    return AArch64::LDPQi;
  case AArch64::LDRWui:
  case AArch64::LDURWi:
    return AArch64::LDPWi;
  case AArch64::LDRXui:
  case AArch64::LDURXi:
    return AArch64::LDPXi;
  case AArch64::LDRSWui:
  case AArch64::LDURSWi:
    return AArch64::LDPSWi;
  case AArch64::LDRHHui:
    return AArch64::LDRWui;
  case AArch64::LDURHHi:
    return AArch64::LDURWi;
  }
}

static unsigned getPreIndexedOpcode(unsigned Opc) {
  switch (Opc) {
  default:
    llvm_unreachable("Opcode has no pre-indexed equivalent!");
  case AArch64::STRSui:
    return AArch64::STRSpre;
  case AArch64::STRDui:
    return AArch64::STRDpre;
  case AArch64::STRQui:
    return AArch64::STRQpre;
  case AArch64::STRBBui:
    return AArch64::STRBBpre;
  case AArch64::STRHHui:
    return AArch64::STRHHpre;
  case AArch64::STRWui:
    return AArch64::STRWpre;
  case AArch64::STRXui:
    return AArch64::STRXpre;
  case AArch64::LDRSui:
    return AArch64::LDRSpre;
  case AArch64::LDRDui:
    return AArch64::LDRDpre;
  case AArch64::LDRQui:
    return AArch64::LDRQpre;
  case AArch64::LDRBBui:
    return AArch64::LDRBBpre;
  case AArch64::LDRHHui:
    return AArch64::LDRHHpre;
  case AArch64::LDRWui:
    return AArch64::LDRWpre;
  case AArch64::LDRXui:
    return AArch64::LDRXpre;
  case AArch64::LDRSWui:
    return AArch64::LDRSWpre;
  case AArch64::LDPSi:
    return AArch64::LDPSpre;
  case AArch64::LDPSWi:
    return AArch64::LDPSWpre;
  case AArch64::LDPDi:
    return AArch64::LDPDpre;
  case AArch64::LDPQi:
    return AArch64::LDPQpre;
  case AArch64::LDPWi:
    return AArch64::LDPWpre;
  case AArch64::LDPXi:
    return AArch64::LDPXpre;
  case AArch64::STPSi:
    return AArch64::STPSpre;
  case AArch64::STPDi:
    return AArch64::STPDpre;
  case AArch64::STPQi:
    return AArch64::STPQpre;
  case AArch64::STPWi:
    return AArch64::STPWpre;
  case AArch64::STPXi:
    return AArch64::STPXpre;
  }
}

static unsigned getPostIndexedOpcode(unsigned Opc) {
  switch (Opc) {
  default:
    llvm_unreachable("Opcode has no post-indexed wise equivalent!");
  case AArch64::STRSui:
    return AArch64::STRSpost;
  case AArch64::STRDui:
    return AArch64::STRDpost;
  case AArch64::STRQui:
    return AArch64::STRQpost;
  case AArch64::STRBBui:
    return AArch64::STRBBpost;
  case AArch64::STRHHui:
    return AArch64::STRHHpost;
  case AArch64::STRWui:
    return AArch64::STRWpost;
  case AArch64::STRXui:
    return AArch64::STRXpost;
  case AArch64::LDRSui:
    return AArch64::LDRSpost;
  case AArch64::LDRDui:
    return AArch64::LDRDpost;
  case AArch64::LDRQui:
    return AArch64::LDRQpost;
  case AArch64::LDRBBui:
    return AArch64::LDRBBpost;
  case AArch64::LDRHHui:
    return AArch64::LDRHHpost;
  case AArch64::LDRWui:
    return AArch64::LDRWpost;
  case AArch64::LDRXui:
    return AArch64::LDRXpost;
  case AArch64::LDRSWui:
    return AArch64::LDRSWpost;
  case AArch64::LDPSi:
    return AArch64::LDPSpost;
  case AArch64::LDPSWi:
    return AArch64::LDPSWpost;
  case AArch64::LDPDi:
    return AArch64::LDPDpost;
  case AArch64::LDPQi:
    return AArch64::LDPQpost;
  case AArch64::LDPWi:
    return AArch64::LDPWpost;
  case AArch64::LDPXi:
    return AArch64::LDPXpost;
  case AArch64::STPSi:
    return AArch64::STPSpost;
  case AArch64::STPDi:
    return AArch64::STPDpost;
  case AArch64::STPQi:
    return AArch64::STPQpost;
  case AArch64::STPWi:
    return AArch64::STPWpost;
  case AArch64::STPXi:
    return AArch64::STPXpost;
  }
}

static bool isPairedLdSt(const MachineInstr *MI) {
  switch (MI->getOpcode()) {
  default:
    return false;
  case AArch64::LDPSi:
  case AArch64::LDPSWi:
  case AArch64::LDPDi:
  case AArch64::LDPQi:
  case AArch64::LDPWi:
  case AArch64::LDPXi:
  case AArch64::STPSi:
  case AArch64::STPDi:
  case AArch64::STPQi:
  case AArch64::STPWi:
  case AArch64::STPXi:
    return true;
  }
}

static const MachineOperand &getLdStRegOp(const MachineInstr *MI,
                                          unsigned PairedRegOp = 0) {
  assert(PairedRegOp < 2 && "Unexpected register operand idx.");
  unsigned Idx = isPairedLdSt(MI) ? PairedRegOp : 0;
  return MI->getOperand(Idx);
}

static const MachineOperand &getLdStBaseOp(const MachineInstr *MI) {
  unsigned Idx = isPairedLdSt(MI) ? 2 : 1;
  return MI->getOperand(Idx);
}

static const MachineOperand &getLdStOffsetOp(const MachineInstr *MI) {
  unsigned Idx = isPairedLdSt(MI) ? 3 : 2;
  return MI->getOperand(Idx);
}

// Copy MachineMemOperands from Op0 and Op1 to a new array assigned to MI.
static void concatenateMemOperands(MachineInstr *MI, MachineInstr *Op0,
                                   MachineInstr *Op1) {
  assert(MI->memoperands_empty() && "expected a new machineinstr");
  size_t numMemRefs = (Op0->memoperands_end() - Op0->memoperands_begin()) +
                      (Op1->memoperands_end() - Op1->memoperands_begin());

  MachineFunction *MF = MI->getParent()->getParent();
  MachineSDNode::mmo_iterator MemBegin = MF->allocateMemRefsArray(numMemRefs);
  MachineSDNode::mmo_iterator MemEnd =
      std::copy(Op0->memoperands_begin(), Op0->memoperands_end(), MemBegin);
  MemEnd = std::copy(Op1->memoperands_begin(), Op1->memoperands_end(), MemEnd);
  MI->setMemRefs(MemBegin, MemEnd);
}

MachineBasicBlock::iterator
AArch64LoadStoreOpt::mergePairedInsns(MachineBasicBlock::iterator I,
                                      MachineBasicBlock::iterator Paired,
                                      const LdStPairFlags &Flags) {
  MachineBasicBlock::iterator NextI = I;
  ++NextI;
  // If NextI is the second of the two instructions to be merged, we need
  // to skip one further. Either way we merge will invalidate the iterator,
  // and we don't need to scan the new instruction, as it's a pairwise
  // instruction, which we're not considering for further action anyway.
  if (NextI == Paired)
    ++NextI;

  int SExtIdx = Flags.getSExtIdx();
  unsigned Opc =
      SExtIdx == -1 ? I->getOpcode() : getMatchingNonSExtOpcode(I->getOpcode());
  bool IsUnscaled = isUnscaledLdSt(Opc);
  int OffsetStride = IsUnscaled ? getMemScale(I) : 1;

  bool MergeForward = Flags.getMergeForward();
  unsigned NewOpc = getMatchingPairOpcode(Opc);
  // Insert our new paired instruction after whichever of the paired
  // instructions MergeForward indicates.
  MachineBasicBlock::iterator InsertionPoint = MergeForward ? Paired : I;
  // Also based on MergeForward is from where we copy the base register operand
  // so we get the flags compatible with the input code.
  const MachineOperand &BaseRegOp =
      MergeForward ? getLdStBaseOp(Paired) : getLdStBaseOp(I);

  // Which register is Rt and which is Rt2 depends on the offset order.
  MachineInstr *RtMI, *Rt2MI;
  if (getLdStOffsetOp(I).getImm() ==
      getLdStOffsetOp(Paired).getImm() + OffsetStride) {
    RtMI = Paired;
    Rt2MI = I;
    // Here we swapped the assumption made for SExtIdx.
    // I.e., we turn ldp I, Paired into ldp Paired, I.
    // Update the index accordingly.
    if (SExtIdx != -1)
      SExtIdx = (SExtIdx + 1) % 2;
  } else {
    RtMI = I;
    Rt2MI = Paired;
  }

  int OffsetImm = getLdStOffsetOp(RtMI).getImm();

  if (isSmallTypeLdMerge(Opc)) {
    // Change the scaled offset from small to large type.
    if (!IsUnscaled)
      OffsetImm /= 2;
    MachineInstr *RtNewDest = MergeForward ? I : Paired;
    // When merging small (< 32 bit) loads for big-endian targets, the order of
    // the component parts gets swapped.
    if (!Subtarget->isLittleEndian())
      std::swap(RtMI, Rt2MI);
    // Construct the new load instruction.
    // FIXME: currently we support only halfword unsigned load. We need to
    // handle byte type, signed, and store instructions as well.
    MachineInstr *NewMemMI, *BitExtMI1, *BitExtMI2;
    NewMemMI = BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                       TII->get(NewOpc))
                   .addOperand(getLdStRegOp(RtNewDest))
                   .addOperand(BaseRegOp)
                   .addImm(OffsetImm);

    // Copy MachineMemOperands from the original loads.
    concatenateMemOperands(NewMemMI, I, Paired);

    DEBUG(
        dbgs()
        << "Creating the new load and extract. Replacing instructions:\n    ");
    DEBUG(I->print(dbgs()));
    DEBUG(dbgs() << "    ");
    DEBUG(Paired->print(dbgs()));
    DEBUG(dbgs() << "  with instructions:\n    ");
    DEBUG((NewMemMI)->print(dbgs()));

    MachineInstr *ExtDestMI = MergeForward ? Paired : I;
    if ((ExtDestMI == Rt2MI) == Subtarget->isLittleEndian()) {
      // Create the bitfield extract for high half.
      BitExtMI1 = BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                          TII->get(AArch64::UBFMWri))
                      .addOperand(getLdStRegOp(Rt2MI))
                      .addReg(getLdStRegOp(RtNewDest).getReg())
                      .addImm(16)
                      .addImm(31);
      // Create the bitfield extract for low half.
      BitExtMI2 = BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                          TII->get(AArch64::ANDWri))
                      .addOperand(getLdStRegOp(RtMI))
                      .addReg(getLdStRegOp(RtNewDest).getReg())
                      .addImm(15);
    } else {
      // Create the bitfield extract for low half.
      BitExtMI1 = BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                          TII->get(AArch64::ANDWri))
                      .addOperand(getLdStRegOp(RtMI))
                      .addReg(getLdStRegOp(RtNewDest).getReg())
                      .addImm(15);
      // Create the bitfield extract for high half.
      BitExtMI2 = BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                          TII->get(AArch64::UBFMWri))
                      .addOperand(getLdStRegOp(Rt2MI))
                      .addReg(getLdStRegOp(RtNewDest).getReg())
                      .addImm(16)
                      .addImm(31);
    }
    DEBUG(dbgs() << "    ");
    DEBUG((BitExtMI1)->print(dbgs()));
    DEBUG(dbgs() << "    ");
    DEBUG((BitExtMI2)->print(dbgs()));
    DEBUG(dbgs() << "\n");

    // Erase the old instructions.
    I->eraseFromParent();
    Paired->eraseFromParent();
    return NextI;
  }

  // Handle Unscaled
  if (IsUnscaled)
    OffsetImm /= OffsetStride;

  // Construct the new instruction.
  MachineInstrBuilder MIB = BuildMI(*I->getParent(), InsertionPoint,
                                    I->getDebugLoc(), TII->get(NewOpc))
                                .addOperand(getLdStRegOp(RtMI))
                                .addOperand(getLdStRegOp(Rt2MI))
                                .addOperand(BaseRegOp)
                                .addImm(OffsetImm);
  (void)MIB;

  // FIXME: Do we need/want to copy the mem operands from the source
  //        instructions? Probably. What uses them after this?

  DEBUG(dbgs() << "Creating pair load/store. Replacing instructions:\n    ");
  DEBUG(I->print(dbgs()));
  DEBUG(dbgs() << "    ");
  DEBUG(Paired->print(dbgs()));
  DEBUG(dbgs() << "  with instruction:\n    ");

  if (SExtIdx != -1) {
    // Generate the sign extension for the proper result of the ldp.
    // I.e., with X1, that would be:
    // %W1<def> = KILL %W1, %X1<imp-def>
    // %X1<def> = SBFMXri %X1<kill>, 0, 31
    MachineOperand &DstMO = MIB->getOperand(SExtIdx);
    // Right now, DstMO has the extended register, since it comes from an
    // extended opcode.
    unsigned DstRegX = DstMO.getReg();
    // Get the W variant of that register.
    unsigned DstRegW = TRI->getSubReg(DstRegX, AArch64::sub_32);
    // Update the result of LDP to use the W instead of the X variant.
    DstMO.setReg(DstRegW);
    DEBUG(((MachineInstr *)MIB)->print(dbgs()));
    DEBUG(dbgs() << "\n");
    // Make the machine verifier happy by providing a definition for
    // the X register.
    // Insert this definition right after the generated LDP, i.e., before
    // InsertionPoint.
    MachineInstrBuilder MIBKill =
        BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                TII->get(TargetOpcode::KILL), DstRegW)
            .addReg(DstRegW)
            .addReg(DstRegX, RegState::Define);
    MIBKill->getOperand(2).setImplicit();
    // Create the sign extension.
    MachineInstrBuilder MIBSXTW =
        BuildMI(*I->getParent(), InsertionPoint, I->getDebugLoc(),
                TII->get(AArch64::SBFMXri), DstRegX)
            .addReg(DstRegX)
            .addImm(0)
            .addImm(31);
    (void)MIBSXTW;
    DEBUG(dbgs() << "  Extend operand:\n    ");
    DEBUG(((MachineInstr *)MIBSXTW)->print(dbgs()));
    DEBUG(dbgs() << "\n");
  } else {
    DEBUG(((MachineInstr *)MIB)->print(dbgs()));
    DEBUG(dbgs() << "\n");
  }

  // Erase the old instructions.
  I->eraseFromParent();
  Paired->eraseFromParent();

  return NextI;
}

/// trackRegDefsUses - Remember what registers the specified instruction uses
/// and modifies.
static void trackRegDefsUses(const MachineInstr *MI, BitVector &ModifiedRegs,
                             BitVector &UsedRegs,
                             const TargetRegisterInfo *TRI) {
  for (const MachineOperand &MO : MI->operands()) {
    if (MO.isRegMask())
      ModifiedRegs.setBitsNotInMask(MO.getRegMask());

    if (!MO.isReg())
      continue;
    unsigned Reg = MO.getReg();
    if (MO.isDef()) {
      for (MCRegAliasIterator AI(Reg, TRI, true); AI.isValid(); ++AI)
        ModifiedRegs.set(*AI);
    } else {
      assert(MO.isUse() && "Reg operand not a def and not a use?!?");
      for (MCRegAliasIterator AI(Reg, TRI, true); AI.isValid(); ++AI)
        UsedRegs.set(*AI);
    }
  }
}

static bool inBoundsForPair(bool IsUnscaled, int Offset, int OffsetStride) {
  // Convert the byte-offset used by unscaled into an "element" offset used
  // by the scaled pair load/store instructions.
  if (IsUnscaled)
    Offset /= OffsetStride;

  return Offset <= 63 && Offset >= -64;
}

// Do alignment, specialized to power of 2 and for signed ints,
// avoiding having to do a C-style cast from uint_64t to int when
// using RoundUpToAlignment from include/llvm/Support/MathExtras.h.
// FIXME: Move this function to include/MathExtras.h?
static int alignTo(int Num, int PowOf2) {
  return (Num + PowOf2 - 1) & ~(PowOf2 - 1);
}

static bool mayAlias(MachineInstr *MIa, MachineInstr *MIb,
                     const AArch64InstrInfo *TII) {
  // One of the instructions must modify memory.
  if (!MIa->mayStore() && !MIb->mayStore())
    return false;

  // Both instructions must be memory operations.
  if (!MIa->mayLoadOrStore() && !MIb->mayLoadOrStore())
    return false;

  return !TII->areMemAccessesTriviallyDisjoint(MIa, MIb);
}

static bool mayAlias(MachineInstr *MIa,
                     SmallVectorImpl<MachineInstr *> &MemInsns,
                     const AArch64InstrInfo *TII) {
  for (auto &MIb : MemInsns)
    if (mayAlias(MIa, MIb, TII))
      return true;

  return false;
}

/// findMatchingInsn - Scan the instructions looking for a load/store that can
/// be combined with the current instruction into a load/store pair.
MachineBasicBlock::iterator
AArch64LoadStoreOpt::findMatchingInsn(MachineBasicBlock::iterator I,
                                      LdStPairFlags &Flags, unsigned Limit) {
  MachineBasicBlock::iterator E = I->getParent()->end();
  MachineBasicBlock::iterator MBBI = I;
  MachineInstr *FirstMI = I;
  ++MBBI;

  unsigned Opc = FirstMI->getOpcode();
  bool MayLoad = FirstMI->mayLoad();
  bool IsUnscaled = isUnscaledLdSt(FirstMI);
  unsigned Reg = getLdStRegOp(FirstMI).getReg();
  unsigned BaseReg = getLdStBaseOp(FirstMI).getReg();
  int Offset = getLdStOffsetOp(FirstMI).getImm();

  // Early exit if the first instruction modifies the base register.
  // e.g., ldr x0, [x0]
  if (FirstMI->modifiesRegister(BaseReg, TRI))
    return E;

  // Early exit if the offset if not possible to match. (6 bits of positive
  // range, plus allow an extra one in case we find a later insn that matches
  // with Offset-1)
  int OffsetStride = IsUnscaled ? getMemScale(FirstMI) : 1;
  if (!isSmallTypeLdMerge(Opc) &&
      !inBoundsForPair(IsUnscaled, Offset, OffsetStride))
    return E;

  // Track which registers have been modified and used between the first insn
  // (inclusive) and the second insn.
  BitVector ModifiedRegs, UsedRegs;
  ModifiedRegs.resize(TRI->getNumRegs());
  UsedRegs.resize(TRI->getNumRegs());

  // Remember any instructions that read/write memory between FirstMI and MI.
  SmallVector<MachineInstr *, 4> MemInsns;

  for (unsigned Count = 0; MBBI != E && Count < Limit; ++MBBI) {
    MachineInstr *MI = MBBI;
    // Skip DBG_VALUE instructions. Otherwise debug info can affect the
    // optimization by changing how far we scan.
    if (MI->isDebugValue())
      continue;

    // Now that we know this is a real instruction, count it.
    ++Count;

    bool CanMergeOpc = Opc == MI->getOpcode();
    Flags.setSExtIdx(-1);
    if (!CanMergeOpc) {
      bool IsValidLdStrOpc;
      unsigned NonSExtOpc = getMatchingNonSExtOpcode(Opc, &IsValidLdStrOpc);
      assert(IsValidLdStrOpc &&
             "Given Opc should be a Load or Store with an immediate");
      // Opc will be the first instruction in the pair.
      Flags.setSExtIdx(NonSExtOpc == (unsigned)Opc ? 1 : 0);
      CanMergeOpc = NonSExtOpc == getMatchingNonSExtOpcode(MI->getOpcode());
    }

    if (CanMergeOpc && getLdStOffsetOp(MI).isImm()) {
      assert(MI->mayLoadOrStore() && "Expected memory operation.");
      // If we've found another instruction with the same opcode, check to see
      // if the base and offset are compatible with our starting instruction.
      // These instructions all have scaled immediate operands, so we just
      // check for +1/-1. Make sure to check the new instruction offset is
      // actually an immediate and not a symbolic reference destined for
      // a relocation.
      //
      // Pairwise instructions have a 7-bit signed offset field. Single insns
      // have a 12-bit unsigned offset field. To be a valid combine, the
      // final offset must be in range.
      unsigned MIBaseReg = getLdStBaseOp(MI).getReg();
      int MIOffset = getLdStOffsetOp(MI).getImm();
      if (BaseReg == MIBaseReg && ((Offset == MIOffset + OffsetStride) ||
                                   (Offset + OffsetStride == MIOffset))) {
        int MinOffset = Offset < MIOffset ? Offset : MIOffset;
        // If this is a volatile load/store that otherwise matched, stop looking
        // as something is going on that we don't have enough information to
        // safely transform. Similarly, stop if we see a hint to avoid pairs.
        if (MI->hasOrderedMemoryRef() || TII->isLdStPairSuppressed(MI))
          return E;
        // If the resultant immediate offset of merging these instructions
        // is out of range for a pairwise instruction, bail and keep looking.
        bool MIIsUnscaled = isUnscaledLdSt(MI);
        bool IsSmallTypeLd = isSmallTypeLdMerge(MI->getOpcode());
        if (!IsSmallTypeLd &&
            !inBoundsForPair(MIIsUnscaled, MinOffset, OffsetStride)) {
          trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);
          MemInsns.push_back(MI);
          continue;
        }

        if (IsSmallTypeLd) {
          // If the alignment requirements of the larger type scaled load
          // instruction can't express the scaled offset of the smaller type
          // input, bail and keep looking.
          if (!IsUnscaled && alignTo(MinOffset, 2) != MinOffset) {
            trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);
            MemInsns.push_back(MI);
            continue;
          }
        } else {
          // If the alignment requirements of the paired (scaled) instruction
          // can't express the offset of the unscaled input, bail and keep
          // looking.
          if (IsUnscaled && (alignTo(MinOffset, OffsetStride) != MinOffset)) {
            trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);
            MemInsns.push_back(MI);
            continue;
          }
        }
        // If the destination register of the loads is the same register, bail
        // and keep looking. A load-pair instruction with both destination
        // registers the same is UNPREDICTABLE and will result in an exception.
        if (MayLoad && Reg == getLdStRegOp(MI).getReg()) {
          trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);
          MemInsns.push_back(MI);
          continue;
        }

        // If the Rt of the second instruction was not modified or used between
        // the two instructions and none of the instructions between the second
        // and first alias with the second, we can combine the second into the
        // first.
        if (!ModifiedRegs[getLdStRegOp(MI).getReg()] &&
            !(MI->mayLoad() && UsedRegs[getLdStRegOp(MI).getReg()]) &&
            !mayAlias(MI, MemInsns, TII)) {
          Flags.setMergeForward(false);
          return MBBI;
        }

        // Likewise, if the Rt of the first instruction is not modified or used
        // between the two instructions and none of the instructions between the
        // first and the second alias with the first, we can combine the first
        // into the second.
        if (!ModifiedRegs[getLdStRegOp(FirstMI).getReg()] &&
            !(MayLoad && UsedRegs[getLdStRegOp(FirstMI).getReg()]) &&
            !mayAlias(FirstMI, MemInsns, TII)) {
          Flags.setMergeForward(true);
          return MBBI;
        }
        // Unable to combine these instructions due to interference in between.
        // Keep looking.
      }
    }

    // If the instruction wasn't a matching load or store.  Stop searching if we
    // encounter a call instruction that might modify memory.
    if (MI->isCall())
      return E;

    // Update modified / uses register lists.
    trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);

    // Otherwise, if the base register is modified, we have no match, so
    // return early.
    if (ModifiedRegs[BaseReg])
      return E;

    // Update list of instructions that read/write memory.
    if (MI->mayLoadOrStore())
      MemInsns.push_back(MI);
  }
  return E;
}

MachineBasicBlock::iterator
AArch64LoadStoreOpt::mergeUpdateInsn(MachineBasicBlock::iterator I,
                                     MachineBasicBlock::iterator Update,
                                     bool IsPreIdx) {
  assert((Update->getOpcode() == AArch64::ADDXri ||
          Update->getOpcode() == AArch64::SUBXri) &&
         "Unexpected base register update instruction to merge!");
  MachineBasicBlock::iterator NextI = I;
  // Return the instruction following the merged instruction, which is
  // the instruction following our unmerged load. Unless that's the add/sub
  // instruction we're merging, in which case it's the one after that.
  if (++NextI == Update)
    ++NextI;

  int Value = Update->getOperand(2).getImm();
  assert(AArch64_AM::getShiftValue(Update->getOperand(3).getImm()) == 0 &&
         "Can't merge 1 << 12 offset into pre-/post-indexed load / store");
  if (Update->getOpcode() == AArch64::SUBXri)
    Value = -Value;

  unsigned NewOpc = IsPreIdx ? getPreIndexedOpcode(I->getOpcode())
                             : getPostIndexedOpcode(I->getOpcode());
  MachineInstrBuilder MIB;
  if (!isPairedLdSt(I)) {
    // Non-paired instruction.
    MIB = BuildMI(*I->getParent(), I, I->getDebugLoc(), TII->get(NewOpc))
              .addOperand(getLdStRegOp(Update))
              .addOperand(getLdStRegOp(I))
              .addOperand(getLdStBaseOp(I))
              .addImm(Value);
  } else {
    // Paired instruction.
    int Scale = getMemScale(I);
    MIB = BuildMI(*I->getParent(), I, I->getDebugLoc(), TII->get(NewOpc))
              .addOperand(getLdStRegOp(Update))
              .addOperand(getLdStRegOp(I, 0))
              .addOperand(getLdStRegOp(I, 1))
              .addOperand(getLdStBaseOp(I))
              .addImm(Value / Scale);
  }
  (void)MIB;

  if (IsPreIdx)
    DEBUG(dbgs() << "Creating pre-indexed load/store.");
  else
    DEBUG(dbgs() << "Creating post-indexed load/store.");
  DEBUG(dbgs() << "    Replacing instructions:\n    ");
  DEBUG(I->print(dbgs()));
  DEBUG(dbgs() << "    ");
  DEBUG(Update->print(dbgs()));
  DEBUG(dbgs() << "  with instruction:\n    ");
  DEBUG(((MachineInstr *)MIB)->print(dbgs()));
  DEBUG(dbgs() << "\n");

  // Erase the old instructions for the block.
  I->eraseFromParent();
  Update->eraseFromParent();

  return NextI;
}

bool AArch64LoadStoreOpt::isMatchingUpdateInsn(MachineInstr *MemMI,
                                               MachineInstr *MI,
                                               unsigned BaseReg, int Offset) {
  switch (MI->getOpcode()) {
  default:
    break;
  case AArch64::SUBXri:
    // Negate the offset for a SUB instruction.
    Offset *= -1;
  // FALLTHROUGH
  case AArch64::ADDXri:
    // Make sure it's a vanilla immediate operand, not a relocation or
    // anything else we can't handle.
    if (!MI->getOperand(2).isImm())
      break;
    // Watch out for 1 << 12 shifted value.
    if (AArch64_AM::getShiftValue(MI->getOperand(3).getImm()))
      break;

    // The update instruction source and destination register must be the
    // same as the load/store base register.
    if (MI->getOperand(0).getReg() != BaseReg ||
        MI->getOperand(1).getReg() != BaseReg)
      break;

    bool IsPairedInsn = isPairedLdSt(MemMI);
    int UpdateOffset = MI->getOperand(2).getImm();
    // For non-paired load/store instructions, the immediate must fit in a
    // signed 9-bit integer.
    if (!IsPairedInsn && (UpdateOffset > 255 || UpdateOffset < -256))
      break;

    // For paired load/store instructions, the immediate must be a multiple of
    // the scaling factor.  The scaled offset must also fit into a signed 7-bit
    // integer.
    if (IsPairedInsn) {
      int Scale = getMemScale(MemMI);
      if (UpdateOffset % Scale != 0)
        break;

      int ScaledOffset = UpdateOffset / Scale;
      if (ScaledOffset > 64 || ScaledOffset < -64)
        break;
    }

    // If we have a non-zero Offset, we check that it matches the amount
    // we're adding to the register.
    if (!Offset || Offset == MI->getOperand(2).getImm())
      return true;
    break;
  }
  return false;
}

MachineBasicBlock::iterator AArch64LoadStoreOpt::findMatchingUpdateInsnForward(
    MachineBasicBlock::iterator I, unsigned Limit, int UnscaledOffset) {
  MachineBasicBlock::iterator E = I->getParent()->end();
  MachineInstr *MemMI = I;
  MachineBasicBlock::iterator MBBI = I;

  unsigned BaseReg = getLdStBaseOp(MemMI).getReg();
  int MIUnscaledOffset = getLdStOffsetOp(MemMI).getImm() * getMemScale(MemMI);

  // Scan forward looking for post-index opportunities.  Updating instructions
  // can't be formed if the memory instruction doesn't have the offset we're
  // looking for.
  if (MIUnscaledOffset != UnscaledOffset)
    return E;

  // If the base register overlaps a destination register, we can't
  // merge the update.
  bool IsPairedInsn = isPairedLdSt(MemMI);
  for (unsigned i = 0, e = IsPairedInsn ? 2 : 1; i != e; ++i) {
    unsigned DestReg = getLdStRegOp(MemMI, i).getReg();
    if (DestReg == BaseReg || TRI->isSubRegister(BaseReg, DestReg))
      return E;
  }

  // Track which registers have been modified and used between the first insn
  // (inclusive) and the second insn.
  BitVector ModifiedRegs, UsedRegs;
  ModifiedRegs.resize(TRI->getNumRegs());
  UsedRegs.resize(TRI->getNumRegs());
  ++MBBI;
  for (unsigned Count = 0; MBBI != E; ++MBBI) {
    MachineInstr *MI = MBBI;
    // Skip DBG_VALUE instructions. Otherwise debug info can affect the
    // optimization by changing how far we scan.
    if (MI->isDebugValue())
      continue;

    // Now that we know this is a real instruction, count it.
    ++Count;

    // If we found a match, return it.
    if (isMatchingUpdateInsn(I, MI, BaseReg, UnscaledOffset))
      return MBBI;

    // Update the status of what the instruction clobbered and used.
    trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);

    // Otherwise, if the base register is used or modified, we have no match, so
    // return early.
    if (ModifiedRegs[BaseReg] || UsedRegs[BaseReg])
      return E;
  }
  return E;
}

MachineBasicBlock::iterator AArch64LoadStoreOpt::findMatchingUpdateInsnBackward(
    MachineBasicBlock::iterator I, unsigned Limit) {
  MachineBasicBlock::iterator B = I->getParent()->begin();
  MachineBasicBlock::iterator E = I->getParent()->end();
  MachineInstr *MemMI = I;
  MachineBasicBlock::iterator MBBI = I;

  unsigned BaseReg = getLdStBaseOp(MemMI).getReg();
  int Offset = getLdStOffsetOp(MemMI).getImm();

  // If the load/store is the first instruction in the block, there's obviously
  // not any matching update. Ditto if the memory offset isn't zero.
  if (MBBI == B || Offset != 0)
    return E;
  // If the base register overlaps a destination register, we can't
  // merge the update.
  bool IsPairedInsn = isPairedLdSt(MemMI);
  for (unsigned i = 0, e = IsPairedInsn ? 2 : 1; i != e; ++i) {
    unsigned DestReg = getLdStRegOp(MemMI, i).getReg();
    if (DestReg == BaseReg || TRI->isSubRegister(BaseReg, DestReg))
      return E;
  }

  // Track which registers have been modified and used between the first insn
  // (inclusive) and the second insn.
  BitVector ModifiedRegs, UsedRegs;
  ModifiedRegs.resize(TRI->getNumRegs());
  UsedRegs.resize(TRI->getNumRegs());
  --MBBI;
  for (unsigned Count = 0; MBBI != B; --MBBI) {
    MachineInstr *MI = MBBI;
    // Skip DBG_VALUE instructions. Otherwise debug info can affect the
    // optimization by changing how far we scan.
    if (MI->isDebugValue())
      continue;

    // Now that we know this is a real instruction, count it.
    ++Count;

    // If we found a match, return it.
    if (isMatchingUpdateInsn(I, MI, BaseReg, Offset))
      return MBBI;

    // Update the status of what the instruction clobbered and used.
    trackRegDefsUses(MI, ModifiedRegs, UsedRegs, TRI);

    // Otherwise, if the base register is used or modified, we have no match, so
    // return early.
    if (ModifiedRegs[BaseReg] || UsedRegs[BaseReg])
      return E;
  }
  return E;
}

bool AArch64LoadStoreOpt::tryToMergeLdStInst(
    MachineBasicBlock::iterator &MBBI) {
  MachineInstr *MI = MBBI;
  MachineBasicBlock::iterator E = MI->getParent()->end();
  // If this is a volatile load/store, don't mess with it.
  if (MI->hasOrderedMemoryRef())
    return false;

  // Make sure this is a reg+imm (as opposed to an address reloc).
  if (!getLdStOffsetOp(MI).isImm())
    return false;

  // Check if this load/store has a hint to avoid pair formation.
  // MachineMemOperands hints are set by the AArch64StorePairSuppress pass.
  if (TII->isLdStPairSuppressed(MI))
    return false;

  // Look ahead up to ScanLimit instructions for a pairable instruction.
  LdStPairFlags Flags;
  MachineBasicBlock::iterator Paired = findMatchingInsn(MBBI, Flags, ScanLimit);
  if (Paired != E) {
    if (isSmallTypeLdMerge(MI)) {
      ++NumSmallTypeMerged;
    } else {
      ++NumPairCreated;
      if (isUnscaledLdSt(MI))
        ++NumUnscaledPairCreated;
    }

    // Merge the loads into a pair. Keeping the iterator straight is a
    // pain, so we let the merge routine tell us what the next instruction
    // is after it's done mucking about.
    MBBI = mergePairedInsns(MBBI, Paired, Flags);
    return true;
  }
  return false;
}

bool AArch64LoadStoreOpt::optimizeBlock(MachineBasicBlock &MBB,
                                        bool enableNarrowLdOpt) {
  bool Modified = false;
  // Three tranformations to do here:
  // 1) Find halfword loads that can be merged into a single 32-bit word load
  //    with bitfield extract instructions.
  //      e.g.,
  //        ldrh w0, [x2]
  //        ldrh w1, [x2, #2]
  //        ; becomes
  //        ldr w0, [x2]
  //        ubfx w1, w0, #16, #16
  //        and w0, w0, #ffff
  // 2) Find loads and stores that can be merged into a single load or store
  //    pair instruction.
  //      e.g.,
  //        ldr x0, [x2]
  //        ldr x1, [x2, #8]
  //        ; becomes
  //        ldp x0, x1, [x2]
  // 3) Find base register updates that can be merged into the load or store
  //    as a base-reg writeback.
  //      e.g.,
  //        ldr x0, [x2]
  //        add x2, x2, #4
  //        ; becomes
  //        ldr x0, [x2], #4

  for (MachineBasicBlock::iterator MBBI = MBB.begin(), E = MBB.end();
       enableNarrowLdOpt && MBBI != E;) {
    MachineInstr *MI = MBBI;
    switch (MI->getOpcode()) {
    default:
      // Just move on to the next instruction.
      ++MBBI;
      break;
    // Scaled instructions.
    case AArch64::LDRHHui:
    // Unscaled instructions.
    case AArch64::LDURHHi: {
      if (tryToMergeLdStInst(MBBI)) {
        Modified = true;
        break;
      }
      ++MBBI;
      break;
    }
      // FIXME: Do the other instructions.
    }
  }

  for (MachineBasicBlock::iterator MBBI = MBB.begin(), E = MBB.end();
       MBBI != E;) {
    MachineInstr *MI = MBBI;
    switch (MI->getOpcode()) {
    default:
      // Just move on to the next instruction.
      ++MBBI;
      break;
    // Scaled instructions.
    case AArch64::STRSui:
    case AArch64::STRDui:
    case AArch64::STRQui:
    case AArch64::STRXui:
    case AArch64::STRWui:
    case AArch64::LDRSui:
    case AArch64::LDRDui:
    case AArch64::LDRQui:
    case AArch64::LDRXui:
    case AArch64::LDRWui:
    case AArch64::LDRSWui:
    // Unscaled instructions.
    case AArch64::STURSi:
    case AArch64::STURDi:
    case AArch64::STURQi:
    case AArch64::STURWi:
    case AArch64::STURXi:
    case AArch64::LDURSi:
    case AArch64::LDURDi:
    case AArch64::LDURQi:
    case AArch64::LDURWi:
    case AArch64::LDURXi:
    case AArch64::LDURSWi: {
      if (tryToMergeLdStInst(MBBI)) {
        Modified = true;
        break;
      }
      ++MBBI;
      break;
    }
      // FIXME: Do the other instructions.
    }
  }

  for (MachineBasicBlock::iterator MBBI = MBB.begin(), E = MBB.end();
       MBBI != E;) {
    MachineInstr *MI = MBBI;
    // Do update merging. It's simpler to keep this separate from the above
    // switch, though not strictly necessary.
    unsigned Opc = MI->getOpcode();
    switch (Opc) {
    default:
      // Just move on to the next instruction.
      ++MBBI;
      break;
    // Scaled instructions.
    case AArch64::STRSui:
    case AArch64::STRDui:
    case AArch64::STRQui:
    case AArch64::STRXui:
    case AArch64::STRWui:
    case AArch64::STRHHui:
    case AArch64::STRBBui:
    case AArch64::LDRSui:
    case AArch64::LDRDui:
    case AArch64::LDRQui:
    case AArch64::LDRXui:
    case AArch64::LDRWui:
    case AArch64::LDRHHui:
    case AArch64::LDRBBui:
    // Unscaled instructions.
    case AArch64::STURSi:
    case AArch64::STURDi:
    case AArch64::STURQi:
    case AArch64::STURWi:
    case AArch64::STURXi:
    case AArch64::LDURSi:
    case AArch64::LDURDi:
    case AArch64::LDURQi:
    case AArch64::LDURWi:
    case AArch64::LDURXi:
    // Paired instructions.
    case AArch64::LDPSi:
    case AArch64::LDPSWi:
    case AArch64::LDPDi:
    case AArch64::LDPQi:
    case AArch64::LDPWi:
    case AArch64::LDPXi:
    case AArch64::STPSi:
    case AArch64::STPDi:
    case AArch64::STPQi:
    case AArch64::STPWi:
    case AArch64::STPXi: {
      // Make sure this is a reg+imm (as opposed to an address reloc).
      if (!getLdStOffsetOp(MI).isImm()) {
        ++MBBI;
        break;
      }
      // Look forward to try to form a post-index instruction. For example,
      // ldr x0, [x20]
      // add x20, x20, #32
      //   merged into:
      // ldr x0, [x20], #32
      MachineBasicBlock::iterator Update =
          findMatchingUpdateInsnForward(MBBI, ScanLimit, 0);
      if (Update != E) {
        // Merge the update into the ld/st.
        MBBI = mergeUpdateInsn(MBBI, Update, /*IsPreIdx=*/false);
        Modified = true;
        ++NumPostFolded;
        break;
      }
      // Don't know how to handle pre/post-index versions, so move to the next
      // instruction.
      if (isUnscaledLdSt(Opc)) {
        ++MBBI;
        break;
      }

      // Look back to try to find a pre-index instruction. For example,
      // add x0, x0, #8
      // ldr x1, [x0]
      //   merged into:
      // ldr x1, [x0, #8]!
      Update = findMatchingUpdateInsnBackward(MBBI, ScanLimit);
      if (Update != E) {
        // Merge the update into the ld/st.
        MBBI = mergeUpdateInsn(MBBI, Update, /*IsPreIdx=*/true);
        Modified = true;
        ++NumPreFolded;
        break;
      }
      // The immediate in the load/store is scaled by the size of the memory
      // operation. The immediate in the add we're looking for,
      // however, is not, so adjust here.
      int UnscaledOffset = getLdStOffsetOp(MI).getImm() * getMemScale(MI);

      // Look forward to try to find a post-index instruction. For example,
      // ldr x1, [x0, #64]
      // add x0, x0, #64
      //   merged into:
      // ldr x1, [x0, #64]!
      Update = findMatchingUpdateInsnForward(MBBI, ScanLimit, UnscaledOffset);
      if (Update != E) {
        // Merge the update into the ld/st.
        MBBI = mergeUpdateInsn(MBBI, Update, /*IsPreIdx=*/true);
        Modified = true;
        ++NumPreFolded;
        break;
      }

      // Nothing found. Just move to the next instruction.
      ++MBBI;
      break;
    }
      // FIXME: Do the other instructions.
    }
  }

  return Modified;
}

bool AArch64LoadStoreOpt::enableNarrowLdMerge(MachineFunction &Fn) {
  const AArch64Subtarget *SubTarget =
      &static_cast<const AArch64Subtarget &>(Fn.getSubtarget());
  bool ProfitableArch = SubTarget->isCortexA57();
  // FIXME: The benefit from converting narrow loads into a wider load could be
  // microarchitectural as it assumes that a single load with two bitfield
  // extracts is cheaper than two narrow loads. Currently, this conversion is
  // enabled only in cortex-a57 on which performance benefits were verified.
  return ProfitableArch & (!SubTarget->requiresStrictAlign());
}

bool AArch64LoadStoreOpt::runOnMachineFunction(MachineFunction &Fn) {
  Subtarget = &static_cast<const AArch64Subtarget &>(Fn.getSubtarget());
  TII = static_cast<const AArch64InstrInfo *>(Subtarget->getInstrInfo());
  TRI = Subtarget->getRegisterInfo();

  bool Modified = false;
  bool enableNarrowLdOpt = enableNarrowLdMerge(Fn);
  for (auto &MBB : Fn)
    Modified |= optimizeBlock(MBB, enableNarrowLdOpt);

  return Modified;
}

// FIXME: Do we need/want a pre-alloc pass like ARM has to try to keep
// loads and stores near one another?

/// createAArch64LoadStoreOptimizationPass - returns an instance of the
/// load / store optimization pass.
FunctionPass *llvm::createAArch64LoadStoreOptimizationPass() {
  return new AArch64LoadStoreOpt();
}