Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2012 |
| 3 | * |
| 4 | * Charger driver for AB8500 |
| 5 | * |
| 6 | * License Terms: GNU General Public License v2 |
| 7 | * Author: |
| 8 | * Johan Palsson <johan.palsson@stericsson.com> |
| 9 | * Karl Komierowski <karl.komierowski@stericsson.com> |
| 10 | * Arun R Murthy <arun.murthy@stericsson.com> |
| 11 | */ |
| 12 | |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/device.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/power_supply.h> |
| 21 | #include <linux/completion.h> |
| 22 | #include <linux/regulator/consumer.h> |
| 23 | #include <linux/err.h> |
| 24 | #include <linux/workqueue.h> |
| 25 | #include <linux/kobject.h> |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 26 | #include <linux/of.h> |
| 27 | #include <linux/mfd/core.h> |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 28 | #include <linux/mfd/abx500/ab8500.h> |
| 29 | #include <linux/mfd/abx500.h> |
| 30 | #include <linux/mfd/abx500/ab8500-bm.h> |
| 31 | #include <linux/mfd/abx500/ab8500-gpadc.h> |
| 32 | #include <linux/mfd/abx500/ux500_chargalg.h> |
| 33 | #include <linux/usb/otg.h> |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 34 | #include <linux/mutex.h> |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 35 | |
| 36 | /* Charger constants */ |
| 37 | #define NO_PW_CONN 0 |
| 38 | #define AC_PW_CONN 1 |
| 39 | #define USB_PW_CONN 2 |
| 40 | |
| 41 | #define MAIN_WDOG_ENA 0x01 |
| 42 | #define MAIN_WDOG_KICK 0x02 |
| 43 | #define MAIN_WDOG_DIS 0x00 |
| 44 | #define CHARG_WD_KICK 0x01 |
| 45 | #define MAIN_CH_ENA 0x01 |
| 46 | #define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 |
| 47 | #define USB_CH_ENA 0x01 |
| 48 | #define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 |
| 49 | #define MAIN_CH_DET 0x01 |
| 50 | #define MAIN_CH_CV_ON 0x04 |
| 51 | #define USB_CH_CV_ON 0x08 |
| 52 | #define VBUS_DET_DBNC100 0x02 |
| 53 | #define VBUS_DET_DBNC1 0x01 |
| 54 | #define OTP_ENABLE_WD 0x01 |
| 55 | |
| 56 | #define MAIN_CH_INPUT_CURR_SHIFT 4 |
| 57 | #define VBUS_IN_CURR_LIM_SHIFT 4 |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 58 | #define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 59 | |
| 60 | #define LED_INDICATOR_PWM_ENA 0x01 |
| 61 | #define LED_INDICATOR_PWM_DIS 0x00 |
| 62 | #define LED_IND_CUR_5MA 0x04 |
| 63 | #define LED_INDICATOR_PWM_DUTY_252_256 0xBF |
| 64 | |
| 65 | /* HW failure constants */ |
| 66 | #define MAIN_CH_TH_PROT 0x02 |
| 67 | #define VBUS_CH_NOK 0x08 |
| 68 | #define USB_CH_TH_PROT 0x02 |
| 69 | #define VBUS_OVV_TH 0x01 |
| 70 | #define MAIN_CH_NOK 0x01 |
| 71 | #define VBUS_DET 0x80 |
| 72 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 73 | #define MAIN_CH_STATUS2_MAINCHGDROP 0x80 |
| 74 | #define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40 |
| 75 | #define USB_CH_VBUSDROP 0x40 |
| 76 | #define USB_CH_VBUSDETDBNC 0x01 |
| 77 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 78 | /* UsbLineStatus register bit masks */ |
| 79 | #define AB8500_USB_LINK_STATUS 0x78 |
| 80 | #define AB8500_STD_HOST_SUSP 0x18 |
| 81 | |
| 82 | /* Watchdog timeout constant */ |
| 83 | #define WD_TIMER 0x30 /* 4min */ |
| 84 | #define WD_KICK_INTERVAL (60 * HZ) |
| 85 | |
| 86 | /* Lowest charger voltage is 3.39V -> 0x4E */ |
| 87 | #define LOW_VOLT_REG 0x4E |
| 88 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 89 | /* Step up/down delay in us */ |
| 90 | #define STEP_UDELAY 1000 |
| 91 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 92 | #define CHARGER_STATUS_POLL 10 /* in ms */ |
| 93 | |
Loic Pallardy | e07a564 | 2012-05-10 15:33:56 +0200 | [diff] [blame] | 94 | #define CHG_WD_INTERVAL (60 * HZ) |
| 95 | |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 96 | #define AB8500_SW_CONTROL_FALLBACK 0x03 |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 97 | /* Wait for enumeration before charing in us */ |
| 98 | #define WAIT_ACA_RID_ENUMERATION (5 * 1000) |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 99 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 100 | /* UsbLineStatus register - usb types */ |
| 101 | enum ab8500_charger_link_status { |
| 102 | USB_STAT_NOT_CONFIGURED, |
| 103 | USB_STAT_STD_HOST_NC, |
| 104 | USB_STAT_STD_HOST_C_NS, |
| 105 | USB_STAT_STD_HOST_C_S, |
| 106 | USB_STAT_HOST_CHG_NM, |
| 107 | USB_STAT_HOST_CHG_HS, |
| 108 | USB_STAT_HOST_CHG_HS_CHIRP, |
| 109 | USB_STAT_DEDICATED_CHG, |
| 110 | USB_STAT_ACA_RID_A, |
| 111 | USB_STAT_ACA_RID_B, |
| 112 | USB_STAT_ACA_RID_C_NM, |
| 113 | USB_STAT_ACA_RID_C_HS, |
| 114 | USB_STAT_ACA_RID_C_HS_CHIRP, |
| 115 | USB_STAT_HM_IDGND, |
| 116 | USB_STAT_RESERVED, |
| 117 | USB_STAT_NOT_VALID_LINK, |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 118 | USB_STAT_PHY_EN, |
| 119 | USB_STAT_SUP_NO_IDGND_VBUS, |
| 120 | USB_STAT_SUP_IDGND_VBUS, |
| 121 | USB_STAT_CHARGER_LINE_1, |
| 122 | USB_STAT_CARKIT_1, |
| 123 | USB_STAT_CARKIT_2, |
| 124 | USB_STAT_ACA_DOCK_CHARGER, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 125 | }; |
| 126 | |
| 127 | enum ab8500_usb_state { |
| 128 | AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ |
| 129 | AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ |
| 130 | AB8500_BM_USB_STATE_CONFIGURED, |
| 131 | AB8500_BM_USB_STATE_SUSPEND, |
| 132 | AB8500_BM_USB_STATE_RESUME, |
| 133 | AB8500_BM_USB_STATE_MAX, |
| 134 | }; |
| 135 | |
| 136 | /* VBUS input current limits supported in AB8500 in mA */ |
| 137 | #define USB_CH_IP_CUR_LVL_0P05 50 |
| 138 | #define USB_CH_IP_CUR_LVL_0P09 98 |
| 139 | #define USB_CH_IP_CUR_LVL_0P19 193 |
| 140 | #define USB_CH_IP_CUR_LVL_0P29 290 |
| 141 | #define USB_CH_IP_CUR_LVL_0P38 380 |
| 142 | #define USB_CH_IP_CUR_LVL_0P45 450 |
| 143 | #define USB_CH_IP_CUR_LVL_0P5 500 |
| 144 | #define USB_CH_IP_CUR_LVL_0P6 600 |
| 145 | #define USB_CH_IP_CUR_LVL_0P7 700 |
| 146 | #define USB_CH_IP_CUR_LVL_0P8 800 |
| 147 | #define USB_CH_IP_CUR_LVL_0P9 900 |
| 148 | #define USB_CH_IP_CUR_LVL_1P0 1000 |
| 149 | #define USB_CH_IP_CUR_LVL_1P1 1100 |
| 150 | #define USB_CH_IP_CUR_LVL_1P3 1300 |
| 151 | #define USB_CH_IP_CUR_LVL_1P4 1400 |
| 152 | #define USB_CH_IP_CUR_LVL_1P5 1500 |
| 153 | |
| 154 | #define VBAT_TRESH_IP_CUR_RED 3800 |
| 155 | |
| 156 | #define to_ab8500_charger_usb_device_info(x) container_of((x), \ |
| 157 | struct ab8500_charger, usb_chg) |
| 158 | #define to_ab8500_charger_ac_device_info(x) container_of((x), \ |
| 159 | struct ab8500_charger, ac_chg) |
| 160 | |
| 161 | /** |
| 162 | * struct ab8500_charger_interrupts - ab8500 interupts |
| 163 | * @name: name of the interrupt |
| 164 | * @isr function pointer to the isr |
| 165 | */ |
| 166 | struct ab8500_charger_interrupts { |
| 167 | char *name; |
| 168 | irqreturn_t (*isr)(int irq, void *data); |
| 169 | }; |
| 170 | |
| 171 | struct ab8500_charger_info { |
| 172 | int charger_connected; |
| 173 | int charger_online; |
| 174 | int charger_voltage; |
| 175 | int cv_active; |
| 176 | bool wd_expired; |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 177 | int charger_current; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 178 | }; |
| 179 | |
| 180 | struct ab8500_charger_event_flags { |
| 181 | bool mainextchnotok; |
| 182 | bool main_thermal_prot; |
| 183 | bool usb_thermal_prot; |
| 184 | bool vbus_ovv; |
| 185 | bool usbchargernotok; |
| 186 | bool chgwdexp; |
| 187 | bool vbus_collapse; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 188 | bool vbus_drop_end; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 189 | }; |
| 190 | |
| 191 | struct ab8500_charger_usb_state { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 192 | int usb_current; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 193 | int usb_current_tmp; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 194 | enum ab8500_usb_state state; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 195 | enum ab8500_usb_state state_tmp; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 196 | spinlock_t usb_lock; |
| 197 | }; |
| 198 | |
| 199 | /** |
| 200 | * struct ab8500_charger - ab8500 Charger device information |
| 201 | * @dev: Pointer to the structure device |
| 202 | * @max_usb_in_curr: Max USB charger input current |
| 203 | * @vbus_detected: VBUS detected |
| 204 | * @vbus_detected_start: |
| 205 | * VBUS detected during startup |
| 206 | * @ac_conn: This will be true when the AC charger has been plugged |
| 207 | * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC |
| 208 | * charger is enabled |
| 209 | * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB |
| 210 | * charger is enabled |
| 211 | * @vbat Battery voltage |
| 212 | * @old_vbat Previously measured battery voltage |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 213 | * @usb_device_is_unrecognised USB device is unrecognised by the hardware |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 214 | * @autopower Indicate if we should have automatic pwron after pwrloss |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 215 | * @autopower_cfg platform specific power config support for "pwron after pwrloss" |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 216 | * @invalid_charger_detect_state State when forcing AB to use invalid charger |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 217 | * @is_usb_host: Indicate if last detected USB type is host |
| 218 | * @is_aca_rid: Incicate if accessory is ACA type |
| 219 | * @current_stepping_sessions: |
| 220 | * Counter for current stepping sessions |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 221 | * @parent: Pointer to the struct ab8500 |
| 222 | * @gpadc: Pointer to the struct gpadc |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 223 | * @bm: Platform specific battery management information |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 224 | * @flags: Structure for information about events triggered |
| 225 | * @usb_state: Structure for usb stack information |
| 226 | * @ac_chg: AC charger power supply |
| 227 | * @usb_chg: USB charger power supply |
| 228 | * @ac: Structure that holds the AC charger properties |
| 229 | * @usb: Structure that holds the USB charger properties |
| 230 | * @regu: Pointer to the struct regulator |
| 231 | * @charger_wq: Work queue for the IRQs and checking HW state |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 232 | * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals |
| 233 | * @pm_lock: Lock to prevent system to suspend |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 234 | * @check_vbat_work Work for checking vbat threshold to adjust vbus current |
| 235 | * @check_hw_failure_work: Work for checking HW state |
| 236 | * @check_usbchgnotok_work: Work for checking USB charger not ok status |
| 237 | * @kick_wd_work: Work for kicking the charger watchdog in case |
| 238 | * of ABB rev 1.* due to the watchog logic bug |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 239 | * @ac_charger_attached_work: Work for checking if AC charger is still |
| 240 | * connected |
| 241 | * @usb_charger_attached_work: Work for checking if USB charger is still |
| 242 | * connected |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 243 | * @ac_work: Work for checking AC charger connection |
| 244 | * @detect_usb_type_work: Work for detecting the USB type connected |
| 245 | * @usb_link_status_work: Work for checking the new USB link status |
| 246 | * @usb_state_changed_work: Work for checking USB state |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 247 | * @attach_work: Work for detecting USB type |
| 248 | * @vbus_drop_end_work: Work for detecting VBUS drop end |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 249 | * @check_main_thermal_prot_work: |
| 250 | * Work for checking Main thermal status |
| 251 | * @check_usb_thermal_prot_work: |
| 252 | * Work for checking USB thermal status |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 253 | * @charger_attached_mutex: For controlling the wakelock |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 254 | */ |
| 255 | struct ab8500_charger { |
| 256 | struct device *dev; |
| 257 | int max_usb_in_curr; |
| 258 | bool vbus_detected; |
| 259 | bool vbus_detected_start; |
| 260 | bool ac_conn; |
| 261 | bool vddadc_en_ac; |
| 262 | bool vddadc_en_usb; |
| 263 | int vbat; |
| 264 | int old_vbat; |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 265 | bool usb_device_is_unrecognised; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 266 | bool autopower; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 267 | bool autopower_cfg; |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 268 | int invalid_charger_detect_state; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 269 | bool is_usb_host; |
| 270 | int is_aca_rid; |
| 271 | atomic_t current_stepping_sessions; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 272 | struct ab8500 *parent; |
| 273 | struct ab8500_gpadc *gpadc; |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 274 | struct abx500_bm_data *bm; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 275 | struct ab8500_charger_event_flags flags; |
| 276 | struct ab8500_charger_usb_state usb_state; |
| 277 | struct ux500_charger ac_chg; |
| 278 | struct ux500_charger usb_chg; |
| 279 | struct ab8500_charger_info ac; |
| 280 | struct ab8500_charger_info usb; |
| 281 | struct regulator *regu; |
| 282 | struct workqueue_struct *charger_wq; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 283 | struct mutex usb_ipt_crnt_lock; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 284 | struct delayed_work check_vbat_work; |
| 285 | struct delayed_work check_hw_failure_work; |
| 286 | struct delayed_work check_usbchgnotok_work; |
| 287 | struct delayed_work kick_wd_work; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 288 | struct delayed_work usb_state_changed_work; |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 289 | struct delayed_work attach_work; |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 290 | struct delayed_work ac_charger_attached_work; |
| 291 | struct delayed_work usb_charger_attached_work; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 292 | struct delayed_work vbus_drop_end_work; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 293 | struct work_struct ac_work; |
| 294 | struct work_struct detect_usb_type_work; |
| 295 | struct work_struct usb_link_status_work; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 296 | struct work_struct check_main_thermal_prot_work; |
| 297 | struct work_struct check_usb_thermal_prot_work; |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 298 | struct usb_phy *usb_phy; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 299 | struct notifier_block nb; |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 300 | struct mutex charger_attached_mutex; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 301 | }; |
| 302 | |
| 303 | /* AC properties */ |
| 304 | static enum power_supply_property ab8500_charger_ac_props[] = { |
| 305 | POWER_SUPPLY_PROP_HEALTH, |
| 306 | POWER_SUPPLY_PROP_PRESENT, |
| 307 | POWER_SUPPLY_PROP_ONLINE, |
| 308 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 309 | POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| 310 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 311 | }; |
| 312 | |
| 313 | /* USB properties */ |
| 314 | static enum power_supply_property ab8500_charger_usb_props[] = { |
| 315 | POWER_SUPPLY_PROP_HEALTH, |
| 316 | POWER_SUPPLY_PROP_CURRENT_AVG, |
| 317 | POWER_SUPPLY_PROP_PRESENT, |
| 318 | POWER_SUPPLY_PROP_ONLINE, |
| 319 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 320 | POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| 321 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 322 | }; |
| 323 | |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 324 | /* |
| 325 | * Function for enabling and disabling sw fallback mode |
| 326 | * should always be disabled when no charger is connected. |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 327 | */ |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 328 | static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, |
| 329 | bool fallback) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 330 | { |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 331 | u8 val; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 332 | u8 reg; |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 333 | u8 bank; |
| 334 | u8 bit; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 335 | int ret; |
| 336 | |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 337 | dev_dbg(di->dev, "SW Fallback: %d\n", fallback); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 338 | |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 339 | if (is_ab8500(di->parent)) { |
| 340 | bank = 0x15; |
| 341 | reg = 0x0; |
| 342 | bit = 3; |
| 343 | } else { |
| 344 | bank = AB8500_SYS_CTRL1_BLOCK; |
| 345 | reg = AB8500_SW_CONTROL_FALLBACK; |
| 346 | bit = 0; |
| 347 | } |
| 348 | |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 349 | /* read the register containing fallback bit */ |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 350 | ret = abx500_get_register_interruptible(di->dev, bank, reg, &val); |
| 351 | if (ret < 0) { |
| 352 | dev_err(di->dev, "%d read failed\n", __LINE__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 353 | return; |
| 354 | } |
| 355 | |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 356 | if (is_ab8500(di->parent)) { |
| 357 | /* enable the OPT emulation registers */ |
| 358 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); |
| 359 | if (ret) { |
| 360 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 361 | goto disable_otp; |
| 362 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 363 | } |
| 364 | |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 365 | if (fallback) |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 366 | val |= (1 << bit); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 367 | else |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 368 | val &= ~(1 << bit); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 369 | |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 370 | /* write back the changed fallback bit value to register */ |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 371 | ret = abx500_set_register_interruptible(di->dev, bank, reg, val); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 372 | if (ret) { |
| 373 | dev_err(di->dev, "%d write failed\n", __LINE__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 374 | } |
| 375 | |
Nicolas Guion | b016322 | 2012-05-23 15:59:43 +0200 | [diff] [blame] | 376 | disable_otp: |
| 377 | if (is_ab8500(di->parent)) { |
| 378 | /* disable the set OTP registers again */ |
| 379 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); |
| 380 | if (ret) { |
| 381 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 382 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 383 | } |
| 384 | } |
| 385 | |
| 386 | /** |
| 387 | * ab8500_power_supply_changed - a wrapper with local extentions for |
| 388 | * power_supply_changed |
| 389 | * @di: pointer to the ab8500_charger structure |
| 390 | * @psy: pointer to power_supply_that have changed. |
| 391 | * |
| 392 | */ |
| 393 | static void ab8500_power_supply_changed(struct ab8500_charger *di, |
| 394 | struct power_supply *psy) |
| 395 | { |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 396 | if (di->autopower_cfg) { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 397 | if (!di->usb.charger_connected && |
| 398 | !di->ac.charger_connected && |
| 399 | di->autopower) { |
| 400 | di->autopower = false; |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 401 | ab8500_enable_disable_sw_fallback(di, false); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 402 | } else if (!di->autopower && |
| 403 | (di->ac.charger_connected || |
| 404 | di->usb.charger_connected)) { |
| 405 | di->autopower = true; |
Paer-Olof Haakansson | defbfa9 | 2013-01-11 13:12:49 +0000 | [diff] [blame] | 406 | ab8500_enable_disable_sw_fallback(di, true); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 407 | } |
| 408 | } |
| 409 | power_supply_changed(psy); |
| 410 | } |
| 411 | |
| 412 | static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, |
| 413 | bool connected) |
| 414 | { |
| 415 | if (connected != di->usb.charger_connected) { |
| 416 | dev_dbg(di->dev, "USB connected:%i\n", connected); |
| 417 | di->usb.charger_connected = connected; |
| 418 | sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 419 | |
| 420 | if (connected) { |
| 421 | mutex_lock(&di->charger_attached_mutex); |
| 422 | mutex_unlock(&di->charger_attached_mutex); |
| 423 | |
| 424 | queue_delayed_work(di->charger_wq, |
| 425 | &di->usb_charger_attached_work, |
| 426 | HZ); |
| 427 | } else { |
| 428 | cancel_delayed_work_sync(&di->usb_charger_attached_work); |
| 429 | mutex_lock(&di->charger_attached_mutex); |
| 430 | mutex_unlock(&di->charger_attached_mutex); |
| 431 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 432 | } |
| 433 | } |
| 434 | |
| 435 | /** |
| 436 | * ab8500_charger_get_ac_voltage() - get ac charger voltage |
| 437 | * @di: pointer to the ab8500_charger structure |
| 438 | * |
| 439 | * Returns ac charger voltage (on success) |
| 440 | */ |
| 441 | static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) |
| 442 | { |
| 443 | int vch; |
| 444 | |
| 445 | /* Only measure voltage if the charger is connected */ |
| 446 | if (di->ac.charger_connected) { |
| 447 | vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); |
| 448 | if (vch < 0) |
| 449 | dev_err(di->dev, "%s gpadc conv failed,\n", __func__); |
| 450 | } else { |
| 451 | vch = 0; |
| 452 | } |
| 453 | return vch; |
| 454 | } |
| 455 | |
| 456 | /** |
| 457 | * ab8500_charger_ac_cv() - check if the main charger is in CV mode |
| 458 | * @di: pointer to the ab8500_charger structure |
| 459 | * |
| 460 | * Returns ac charger CV mode (on success) else error code |
| 461 | */ |
| 462 | static int ab8500_charger_ac_cv(struct ab8500_charger *di) |
| 463 | { |
| 464 | u8 val; |
| 465 | int ret = 0; |
| 466 | |
| 467 | /* Only check CV mode if the charger is online */ |
| 468 | if (di->ac.charger_online) { |
| 469 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 470 | AB8500_CH_STATUS1_REG, &val); |
| 471 | if (ret < 0) { |
| 472 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 473 | return 0; |
| 474 | } |
| 475 | |
| 476 | if (val & MAIN_CH_CV_ON) |
| 477 | ret = 1; |
| 478 | else |
| 479 | ret = 0; |
| 480 | } |
| 481 | |
| 482 | return ret; |
| 483 | } |
| 484 | |
| 485 | /** |
| 486 | * ab8500_charger_get_vbus_voltage() - get vbus voltage |
| 487 | * @di: pointer to the ab8500_charger structure |
| 488 | * |
| 489 | * This function returns the vbus voltage. |
| 490 | * Returns vbus voltage (on success) |
| 491 | */ |
| 492 | static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) |
| 493 | { |
| 494 | int vch; |
| 495 | |
| 496 | /* Only measure voltage if the charger is connected */ |
| 497 | if (di->usb.charger_connected) { |
| 498 | vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); |
| 499 | if (vch < 0) |
| 500 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 501 | } else { |
| 502 | vch = 0; |
| 503 | } |
| 504 | return vch; |
| 505 | } |
| 506 | |
| 507 | /** |
| 508 | * ab8500_charger_get_usb_current() - get usb charger current |
| 509 | * @di: pointer to the ab8500_charger structure |
| 510 | * |
| 511 | * This function returns the usb charger current. |
| 512 | * Returns usb current (on success) and error code on failure |
| 513 | */ |
| 514 | static int ab8500_charger_get_usb_current(struct ab8500_charger *di) |
| 515 | { |
| 516 | int ich; |
| 517 | |
| 518 | /* Only measure current if the charger is online */ |
| 519 | if (di->usb.charger_online) { |
| 520 | ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); |
| 521 | if (ich < 0) |
| 522 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 523 | } else { |
| 524 | ich = 0; |
| 525 | } |
| 526 | return ich; |
| 527 | } |
| 528 | |
| 529 | /** |
| 530 | * ab8500_charger_get_ac_current() - get ac charger current |
| 531 | * @di: pointer to the ab8500_charger structure |
| 532 | * |
| 533 | * This function returns the ac charger current. |
| 534 | * Returns ac current (on success) and error code on failure. |
| 535 | */ |
| 536 | static int ab8500_charger_get_ac_current(struct ab8500_charger *di) |
| 537 | { |
| 538 | int ich; |
| 539 | |
| 540 | /* Only measure current if the charger is online */ |
| 541 | if (di->ac.charger_online) { |
| 542 | ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); |
| 543 | if (ich < 0) |
| 544 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 545 | } else { |
| 546 | ich = 0; |
| 547 | } |
| 548 | return ich; |
| 549 | } |
| 550 | |
| 551 | /** |
| 552 | * ab8500_charger_usb_cv() - check if the usb charger is in CV mode |
| 553 | * @di: pointer to the ab8500_charger structure |
| 554 | * |
| 555 | * Returns ac charger CV mode (on success) else error code |
| 556 | */ |
| 557 | static int ab8500_charger_usb_cv(struct ab8500_charger *di) |
| 558 | { |
| 559 | int ret; |
| 560 | u8 val; |
| 561 | |
| 562 | /* Only check CV mode if the charger is online */ |
| 563 | if (di->usb.charger_online) { |
| 564 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 565 | AB8500_CH_USBCH_STAT1_REG, &val); |
| 566 | if (ret < 0) { |
| 567 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 568 | return 0; |
| 569 | } |
| 570 | |
| 571 | if (val & USB_CH_CV_ON) |
| 572 | ret = 1; |
| 573 | else |
| 574 | ret = 0; |
| 575 | } else { |
| 576 | ret = 0; |
| 577 | } |
| 578 | |
| 579 | return ret; |
| 580 | } |
| 581 | |
| 582 | /** |
| 583 | * ab8500_charger_detect_chargers() - Detect the connected chargers |
| 584 | * @di: pointer to the ab8500_charger structure |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 585 | * @probe: if probe, don't delay and wait for HW |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 586 | * |
| 587 | * Returns the type of charger connected. |
| 588 | * For USB it will not mean we can actually charge from it |
| 589 | * but that there is a USB cable connected that we have to |
| 590 | * identify. This is used during startup when we don't get |
| 591 | * interrupts of the charger detection |
| 592 | * |
| 593 | * Returns an integer value, that means, |
| 594 | * NO_PW_CONN no power supply is connected |
| 595 | * AC_PW_CONN if the AC power supply is connected |
| 596 | * USB_PW_CONN if the USB power supply is connected |
| 597 | * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected |
| 598 | */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 599 | static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 600 | { |
| 601 | int result = NO_PW_CONN; |
| 602 | int ret; |
| 603 | u8 val; |
| 604 | |
| 605 | /* Check for AC charger */ |
| 606 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 607 | AB8500_CH_STATUS1_REG, &val); |
| 608 | if (ret < 0) { |
| 609 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 610 | return ret; |
| 611 | } |
| 612 | |
| 613 | if (val & MAIN_CH_DET) |
| 614 | result = AC_PW_CONN; |
| 615 | |
| 616 | /* Check for USB charger */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 617 | |
| 618 | if (!probe) { |
| 619 | /* |
| 620 | * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 |
| 621 | * when disconnecting ACA even though no |
| 622 | * charger was connected. Try waiting a little |
| 623 | * longer than the 100 ms of VBUS_DET_DBNC100... |
| 624 | */ |
| 625 | msleep(110); |
| 626 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 627 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 628 | AB8500_CH_USBCH_STAT1_REG, &val); |
| 629 | if (ret < 0) { |
| 630 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 631 | return ret; |
| 632 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 633 | dev_dbg(di->dev, |
| 634 | "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, |
| 635 | val); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 636 | if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) |
| 637 | result |= USB_PW_CONN; |
| 638 | |
| 639 | return result; |
| 640 | } |
| 641 | |
| 642 | /** |
| 643 | * ab8500_charger_max_usb_curr() - get the max curr for the USB type |
| 644 | * @di: pointer to the ab8500_charger structure |
| 645 | * @link_status: the identified USB type |
| 646 | * |
| 647 | * Get the maximum current that is allowed to be drawn from the host |
| 648 | * based on the USB type. |
| 649 | * Returns error code in case of failure else 0 on success |
| 650 | */ |
| 651 | static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 652 | enum ab8500_charger_link_status link_status) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 653 | { |
| 654 | int ret = 0; |
| 655 | |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 656 | di->usb_device_is_unrecognised = false; |
| 657 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 658 | /* |
| 659 | * Platform only supports USB 2.0. |
| 660 | * This means that charging current from USB source |
| 661 | * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* |
| 662 | * should set USB_CH_IP_CUR_LVL_0P5. |
| 663 | */ |
| 664 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 665 | switch (link_status) { |
| 666 | case USB_STAT_STD_HOST_NC: |
| 667 | case USB_STAT_STD_HOST_C_NS: |
| 668 | case USB_STAT_STD_HOST_C_S: |
| 669 | dev_dbg(di->dev, "USB Type - Standard host is " |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 670 | "detected through USB driver\n"); |
| 671 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 672 | di->is_usb_host = true; |
| 673 | di->is_aca_rid = 0; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 674 | break; |
| 675 | case USB_STAT_HOST_CHG_HS_CHIRP: |
| 676 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 677 | di->is_usb_host = true; |
| 678 | di->is_aca_rid = 0; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 679 | break; |
| 680 | case USB_STAT_HOST_CHG_HS: |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 681 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 682 | di->is_usb_host = true; |
| 683 | di->is_aca_rid = 0; |
| 684 | break; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 685 | case USB_STAT_ACA_RID_C_HS: |
| 686 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 687 | di->is_usb_host = false; |
| 688 | di->is_aca_rid = 0; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 689 | break; |
| 690 | case USB_STAT_ACA_RID_A: |
| 691 | /* |
| 692 | * Dedicated charger level minus maximum current accessory |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 693 | * can consume (900mA). Closest level is 500mA |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 694 | */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 695 | dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); |
| 696 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 697 | di->is_usb_host = false; |
| 698 | di->is_aca_rid = 1; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 699 | break; |
| 700 | case USB_STAT_ACA_RID_B: |
| 701 | /* |
| 702 | * Dedicated charger level minus 120mA (20mA for ACA and |
| 703 | * 100mA for potential accessory). Closest level is 1300mA |
| 704 | */ |
| 705 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 706 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, |
| 707 | di->max_usb_in_curr); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 708 | di->is_usb_host = false; |
| 709 | di->is_aca_rid = 1; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 710 | break; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 711 | case USB_STAT_HOST_CHG_NM: |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 712 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 713 | di->is_usb_host = true; |
| 714 | di->is_aca_rid = 0; |
| 715 | break; |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 716 | case USB_STAT_DEDICATED_CHG: |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 717 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 718 | di->is_usb_host = false; |
| 719 | di->is_aca_rid = 0; |
| 720 | break; |
| 721 | case USB_STAT_ACA_RID_C_HS_CHIRP: |
| 722 | case USB_STAT_ACA_RID_C_NM: |
| 723 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; |
| 724 | di->is_usb_host = false; |
| 725 | di->is_aca_rid = 1; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 726 | break; |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 727 | case USB_STAT_NOT_CONFIGURED: |
| 728 | if (di->vbus_detected) { |
| 729 | di->usb_device_is_unrecognised = true; |
| 730 | dev_dbg(di->dev, "USB Type - Legacy charger.\n"); |
| 731 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; |
| 732 | break; |
| 733 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 734 | case USB_STAT_HM_IDGND: |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 735 | dev_err(di->dev, "USB Type - Charging not allowed\n"); |
| 736 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 737 | ret = -ENXIO; |
| 738 | break; |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 739 | case USB_STAT_RESERVED: |
| 740 | if (is_ab8500(di->parent)) { |
| 741 | di->flags.vbus_collapse = true; |
| 742 | dev_err(di->dev, "USB Type - USB_STAT_RESERVED " |
| 743 | "VBUS has collapsed\n"); |
| 744 | ret = -ENXIO; |
| 745 | break; |
| 746 | } |
| 747 | if (is_ab9540(di->parent) || is_ab8505(di->parent)) { |
| 748 | dev_dbg(di->dev, "USB Type - Charging not allowed\n"); |
| 749 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 750 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", |
| 751 | link_status, di->max_usb_in_curr); |
| 752 | ret = -ENXIO; |
| 753 | break; |
| 754 | } |
| 755 | break; |
| 756 | case USB_STAT_CARKIT_1: |
| 757 | case USB_STAT_CARKIT_2: |
| 758 | case USB_STAT_ACA_DOCK_CHARGER: |
| 759 | case USB_STAT_CHARGER_LINE_1: |
| 760 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 761 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, |
| 762 | di->max_usb_in_curr); |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 763 | case USB_STAT_NOT_VALID_LINK: |
| 764 | dev_err(di->dev, "USB Type invalid - try charging anyway\n"); |
| 765 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 766 | break; |
| 767 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 768 | default: |
| 769 | dev_err(di->dev, "USB Type - Unknown\n"); |
| 770 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 771 | ret = -ENXIO; |
| 772 | break; |
| 773 | }; |
| 774 | |
| 775 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", |
| 776 | link_status, di->max_usb_in_curr); |
| 777 | |
| 778 | return ret; |
| 779 | } |
| 780 | |
| 781 | /** |
| 782 | * ab8500_charger_read_usb_type() - read the type of usb connected |
| 783 | * @di: pointer to the ab8500_charger structure |
| 784 | * |
| 785 | * Detect the type of the plugged USB |
| 786 | * Returns error code in case of failure else 0 on success |
| 787 | */ |
| 788 | static int ab8500_charger_read_usb_type(struct ab8500_charger *di) |
| 789 | { |
| 790 | int ret; |
| 791 | u8 val; |
| 792 | |
| 793 | ret = abx500_get_register_interruptible(di->dev, |
| 794 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); |
| 795 | if (ret < 0) { |
| 796 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 797 | return ret; |
| 798 | } |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 799 | if (is_ab8500(di->parent)) { |
| 800 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
| 801 | AB8500_USB_LINE_STAT_REG, &val); |
| 802 | } else { |
| 803 | if (is_ab9540(di->parent) || is_ab8505(di->parent)) |
| 804 | ret = abx500_get_register_interruptible(di->dev, |
| 805 | AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); |
| 806 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 807 | if (ret < 0) { |
| 808 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 809 | return ret; |
| 810 | } |
| 811 | |
| 812 | /* get the USB type */ |
| 813 | val = (val & AB8500_USB_LINK_STATUS) >> 3; |
| 814 | ret = ab8500_charger_max_usb_curr(di, |
| 815 | (enum ab8500_charger_link_status) val); |
| 816 | |
| 817 | return ret; |
| 818 | } |
| 819 | |
| 820 | /** |
| 821 | * ab8500_charger_detect_usb_type() - get the type of usb connected |
| 822 | * @di: pointer to the ab8500_charger structure |
| 823 | * |
| 824 | * Detect the type of the plugged USB |
| 825 | * Returns error code in case of failure else 0 on success |
| 826 | */ |
| 827 | static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) |
| 828 | { |
| 829 | int i, ret; |
| 830 | u8 val; |
| 831 | |
| 832 | /* |
| 833 | * On getting the VBUS rising edge detect interrupt there |
| 834 | * is a 250ms delay after which the register UsbLineStatus |
| 835 | * is filled with valid data. |
| 836 | */ |
| 837 | for (i = 0; i < 10; i++) { |
| 838 | msleep(250); |
| 839 | ret = abx500_get_register_interruptible(di->dev, |
| 840 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, |
| 841 | &val); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 842 | dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", |
| 843 | __func__, val); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 844 | if (ret < 0) { |
| 845 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 846 | return ret; |
| 847 | } |
Hakan Berg | 74a8e34 | 2013-01-11 13:12:58 +0000 | [diff] [blame] | 848 | |
| 849 | if (is_ab8500(di->parent)) |
| 850 | ret = abx500_get_register_interruptible(di->dev, |
| 851 | AB8500_USB, AB8500_USB_LINE_STAT_REG, &val); |
| 852 | else |
| 853 | ret = abx500_get_register_interruptible(di->dev, |
| 854 | AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 855 | if (ret < 0) { |
| 856 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 857 | return ret; |
| 858 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 859 | dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, |
| 860 | val); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 861 | /* |
| 862 | * Until the IT source register is read the UsbLineStatus |
| 863 | * register is not updated, hence doing the same |
| 864 | * Revisit this: |
| 865 | */ |
| 866 | |
| 867 | /* get the USB type */ |
| 868 | val = (val & AB8500_USB_LINK_STATUS) >> 3; |
| 869 | if (val) |
| 870 | break; |
| 871 | } |
| 872 | ret = ab8500_charger_max_usb_curr(di, |
| 873 | (enum ab8500_charger_link_status) val); |
| 874 | |
| 875 | return ret; |
| 876 | } |
| 877 | |
| 878 | /* |
| 879 | * This array maps the raw hex value to charger voltage used by the AB8500 |
| 880 | * Values taken from the UM0836 |
| 881 | */ |
| 882 | static int ab8500_charger_voltage_map[] = { |
| 883 | 3500 , |
| 884 | 3525 , |
| 885 | 3550 , |
| 886 | 3575 , |
| 887 | 3600 , |
| 888 | 3625 , |
| 889 | 3650 , |
| 890 | 3675 , |
| 891 | 3700 , |
| 892 | 3725 , |
| 893 | 3750 , |
| 894 | 3775 , |
| 895 | 3800 , |
| 896 | 3825 , |
| 897 | 3850 , |
| 898 | 3875 , |
| 899 | 3900 , |
| 900 | 3925 , |
| 901 | 3950 , |
| 902 | 3975 , |
| 903 | 4000 , |
| 904 | 4025 , |
| 905 | 4050 , |
| 906 | 4060 , |
| 907 | 4070 , |
| 908 | 4080 , |
| 909 | 4090 , |
| 910 | 4100 , |
| 911 | 4110 , |
| 912 | 4120 , |
| 913 | 4130 , |
| 914 | 4140 , |
| 915 | 4150 , |
| 916 | 4160 , |
| 917 | 4170 , |
| 918 | 4180 , |
| 919 | 4190 , |
| 920 | 4200 , |
| 921 | 4210 , |
| 922 | 4220 , |
| 923 | 4230 , |
| 924 | 4240 , |
| 925 | 4250 , |
| 926 | 4260 , |
| 927 | 4270 , |
| 928 | 4280 , |
| 929 | 4290 , |
| 930 | 4300 , |
| 931 | 4310 , |
| 932 | 4320 , |
| 933 | 4330 , |
| 934 | 4340 , |
| 935 | 4350 , |
| 936 | 4360 , |
| 937 | 4370 , |
| 938 | 4380 , |
| 939 | 4390 , |
| 940 | 4400 , |
| 941 | 4410 , |
| 942 | 4420 , |
| 943 | 4430 , |
| 944 | 4440 , |
| 945 | 4450 , |
| 946 | 4460 , |
| 947 | 4470 , |
| 948 | 4480 , |
| 949 | 4490 , |
| 950 | 4500 , |
| 951 | 4510 , |
| 952 | 4520 , |
| 953 | 4530 , |
| 954 | 4540 , |
| 955 | 4550 , |
| 956 | 4560 , |
| 957 | 4570 , |
| 958 | 4580 , |
| 959 | 4590 , |
| 960 | 4600 , |
| 961 | }; |
| 962 | |
| 963 | /* |
| 964 | * This array maps the raw hex value to charger current used by the AB8500 |
| 965 | * Values taken from the UM0836 |
| 966 | */ |
| 967 | static int ab8500_charger_current_map[] = { |
| 968 | 100 , |
| 969 | 200 , |
| 970 | 300 , |
| 971 | 400 , |
| 972 | 500 , |
| 973 | 600 , |
| 974 | 700 , |
| 975 | 800 , |
| 976 | 900 , |
| 977 | 1000 , |
| 978 | 1100 , |
| 979 | 1200 , |
| 980 | 1300 , |
| 981 | 1400 , |
| 982 | 1500 , |
| 983 | }; |
| 984 | |
| 985 | /* |
| 986 | * This array maps the raw hex value to VBUS input current used by the AB8500 |
| 987 | * Values taken from the UM0836 |
| 988 | */ |
| 989 | static int ab8500_charger_vbus_in_curr_map[] = { |
| 990 | USB_CH_IP_CUR_LVL_0P05, |
| 991 | USB_CH_IP_CUR_LVL_0P09, |
| 992 | USB_CH_IP_CUR_LVL_0P19, |
| 993 | USB_CH_IP_CUR_LVL_0P29, |
| 994 | USB_CH_IP_CUR_LVL_0P38, |
| 995 | USB_CH_IP_CUR_LVL_0P45, |
| 996 | USB_CH_IP_CUR_LVL_0P5, |
| 997 | USB_CH_IP_CUR_LVL_0P6, |
| 998 | USB_CH_IP_CUR_LVL_0P7, |
| 999 | USB_CH_IP_CUR_LVL_0P8, |
| 1000 | USB_CH_IP_CUR_LVL_0P9, |
| 1001 | USB_CH_IP_CUR_LVL_1P0, |
| 1002 | USB_CH_IP_CUR_LVL_1P1, |
| 1003 | USB_CH_IP_CUR_LVL_1P3, |
| 1004 | USB_CH_IP_CUR_LVL_1P4, |
| 1005 | USB_CH_IP_CUR_LVL_1P5, |
| 1006 | }; |
| 1007 | |
| 1008 | static int ab8500_voltage_to_regval(int voltage) |
| 1009 | { |
| 1010 | int i; |
| 1011 | |
| 1012 | /* Special case for voltage below 3.5V */ |
| 1013 | if (voltage < ab8500_charger_voltage_map[0]) |
| 1014 | return LOW_VOLT_REG; |
| 1015 | |
| 1016 | for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { |
| 1017 | if (voltage < ab8500_charger_voltage_map[i]) |
| 1018 | return i - 1; |
| 1019 | } |
| 1020 | |
| 1021 | /* If not last element, return error */ |
| 1022 | i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; |
| 1023 | if (voltage == ab8500_charger_voltage_map[i]) |
| 1024 | return i; |
| 1025 | else |
| 1026 | return -1; |
| 1027 | } |
| 1028 | |
| 1029 | static int ab8500_current_to_regval(int curr) |
| 1030 | { |
| 1031 | int i; |
| 1032 | |
| 1033 | if (curr < ab8500_charger_current_map[0]) |
| 1034 | return 0; |
| 1035 | |
| 1036 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { |
| 1037 | if (curr < ab8500_charger_current_map[i]) |
| 1038 | return i - 1; |
| 1039 | } |
| 1040 | |
| 1041 | /* If not last element, return error */ |
| 1042 | i = ARRAY_SIZE(ab8500_charger_current_map) - 1; |
| 1043 | if (curr == ab8500_charger_current_map[i]) |
| 1044 | return i; |
| 1045 | else |
| 1046 | return -1; |
| 1047 | } |
| 1048 | |
| 1049 | static int ab8500_vbus_in_curr_to_regval(int curr) |
| 1050 | { |
| 1051 | int i; |
| 1052 | |
| 1053 | if (curr < ab8500_charger_vbus_in_curr_map[0]) |
| 1054 | return 0; |
| 1055 | |
| 1056 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { |
| 1057 | if (curr < ab8500_charger_vbus_in_curr_map[i]) |
| 1058 | return i - 1; |
| 1059 | } |
| 1060 | |
| 1061 | /* If not last element, return error */ |
| 1062 | i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; |
| 1063 | if (curr == ab8500_charger_vbus_in_curr_map[i]) |
| 1064 | return i; |
| 1065 | else |
| 1066 | return -1; |
| 1067 | } |
| 1068 | |
| 1069 | /** |
| 1070 | * ab8500_charger_get_usb_cur() - get usb current |
| 1071 | * @di: pointer to the ab8500_charger structre |
| 1072 | * |
| 1073 | * The usb stack provides the maximum current that can be drawn from |
| 1074 | * the standard usb host. This will be in mA. |
| 1075 | * This function converts current in mA to a value that can be written |
| 1076 | * to the register. Returns -1 if charging is not allowed |
| 1077 | */ |
| 1078 | static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) |
| 1079 | { |
| 1080 | switch (di->usb_state.usb_current) { |
| 1081 | case 100: |
| 1082 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; |
| 1083 | break; |
| 1084 | case 200: |
| 1085 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; |
| 1086 | break; |
| 1087 | case 300: |
| 1088 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; |
| 1089 | break; |
| 1090 | case 400: |
| 1091 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; |
| 1092 | break; |
| 1093 | case 500: |
| 1094 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 1095 | break; |
| 1096 | default: |
| 1097 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 1098 | return -1; |
| 1099 | break; |
| 1100 | }; |
| 1101 | return 0; |
| 1102 | } |
| 1103 | |
| 1104 | /** |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1105 | * ab8500_charger_set_current() - set charger current |
| 1106 | * @di: pointer to the ab8500_charger structure |
| 1107 | * @ich: charger current, in mA |
| 1108 | * @reg: select what charger register to set |
| 1109 | * |
| 1110 | * Set charger current. |
| 1111 | * There is no state machine in the AB to step up/down the charger |
| 1112 | * current to avoid dips and spikes on MAIN, VBUS and VBAT when |
| 1113 | * charging is started. Instead we need to implement |
| 1114 | * this charger current step-up/down here. |
| 1115 | * Returns error code in case of failure else 0(on success) |
| 1116 | */ |
| 1117 | static int ab8500_charger_set_current(struct ab8500_charger *di, |
| 1118 | int ich, int reg) |
| 1119 | { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1120 | int ret = 0; |
| 1121 | int auto_curr_index, curr_index, prev_curr_index, shift_value, i; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1122 | u8 reg_value; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1123 | u32 step_udelay; |
| 1124 | bool no_stepping = false; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1125 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1126 | atomic_inc(&di->current_stepping_sessions); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1127 | |
| 1128 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 1129 | reg, ®_value); |
| 1130 | if (ret < 0) { |
| 1131 | dev_err(di->dev, "%s read failed\n", __func__); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1132 | goto exit_set_current; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1133 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1134 | |
| 1135 | switch (reg) { |
| 1136 | case AB8500_MCH_IPT_CURLVL_REG: |
| 1137 | shift_value = MAIN_CH_INPUT_CURR_SHIFT; |
| 1138 | prev_curr_index = (reg_value >> shift_value); |
| 1139 | curr_index = ab8500_current_to_regval(ich); |
| 1140 | step_udelay = STEP_UDELAY; |
| 1141 | if (!di->ac.charger_connected) |
| 1142 | no_stepping = true; |
| 1143 | break; |
| 1144 | case AB8500_USBCH_IPT_CRNTLVL_REG: |
| 1145 | shift_value = VBUS_IN_CURR_LIM_SHIFT; |
| 1146 | prev_curr_index = (reg_value >> shift_value); |
| 1147 | curr_index = ab8500_vbus_in_curr_to_regval(ich); |
| 1148 | step_udelay = STEP_UDELAY * 100; |
| 1149 | |
| 1150 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 1151 | AB8500_CH_USBCH_STAT2_REG, ®_value); |
| 1152 | if (ret < 0) { |
| 1153 | dev_err(di->dev, "%s read failed\n", __func__); |
| 1154 | goto exit_set_current; |
| 1155 | } |
| 1156 | auto_curr_index = |
| 1157 | reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT; |
| 1158 | |
| 1159 | dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n", |
| 1160 | __func__, |
| 1161 | ab8500_charger_vbus_in_curr_map[auto_curr_index]); |
| 1162 | |
| 1163 | prev_curr_index = min(prev_curr_index, auto_curr_index); |
| 1164 | |
| 1165 | if (!di->usb.charger_connected) |
| 1166 | no_stepping = true; |
| 1167 | break; |
| 1168 | case AB8500_CH_OPT_CRNTLVL_REG: |
| 1169 | shift_value = 0; |
| 1170 | prev_curr_index = (reg_value >> shift_value); |
| 1171 | curr_index = ab8500_current_to_regval(ich); |
| 1172 | step_udelay = STEP_UDELAY; |
| 1173 | if (curr_index && (curr_index - prev_curr_index) > 1) |
| 1174 | step_udelay *= 100; |
| 1175 | |
| 1176 | if (!di->usb.charger_connected && !di->ac.charger_connected) |
| 1177 | no_stepping = true; |
| 1178 | |
| 1179 | break; |
| 1180 | default: |
| 1181 | dev_err(di->dev, "%s current register not valid\n", __func__); |
| 1182 | ret = -ENXIO; |
| 1183 | goto exit_set_current; |
| 1184 | } |
| 1185 | |
| 1186 | if (curr_index < 0) { |
| 1187 | dev_err(di->dev, "requested current limit out-of-range\n"); |
| 1188 | ret = -ENXIO; |
| 1189 | goto exit_set_current; |
| 1190 | } |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1191 | |
| 1192 | /* only update current if it's been changed */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1193 | if (prev_curr_index == curr_index) { |
| 1194 | dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", |
| 1195 | __func__, reg); |
| 1196 | ret = 0; |
| 1197 | goto exit_set_current; |
| 1198 | } |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1199 | |
| 1200 | dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", |
| 1201 | __func__, ich, reg); |
| 1202 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1203 | if (no_stepping) { |
| 1204 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1205 | reg, (u8)curr_index << shift_value); |
| 1206 | if (ret) |
| 1207 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1208 | } else if (prev_curr_index > curr_index) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1209 | for (i = prev_curr_index - 1; i >= curr_index; i--) { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1210 | dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", |
| 1211 | (u8) i << shift_value, reg); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1212 | ret = abx500_set_register_interruptible(di->dev, |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1213 | AB8500_CHARGER, reg, (u8)i << shift_value); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1214 | if (ret) { |
| 1215 | dev_err(di->dev, "%s write failed\n", __func__); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1216 | goto exit_set_current; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1217 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1218 | if (i != curr_index) |
| 1219 | usleep_range(step_udelay, step_udelay * 2); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1220 | } |
| 1221 | } else { |
| 1222 | for (i = prev_curr_index + 1; i <= curr_index; i++) { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1223 | dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", |
| 1224 | (u8)i << shift_value, reg); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1225 | ret = abx500_set_register_interruptible(di->dev, |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1226 | AB8500_CHARGER, reg, (u8)i << shift_value); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1227 | if (ret) { |
| 1228 | dev_err(di->dev, "%s write failed\n", __func__); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1229 | goto exit_set_current; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1230 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1231 | if (i != curr_index) |
| 1232 | usleep_range(step_udelay, step_udelay * 2); |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1233 | } |
| 1234 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1235 | |
| 1236 | exit_set_current: |
| 1237 | atomic_dec(&di->current_stepping_sessions); |
| 1238 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1239 | return ret; |
| 1240 | } |
| 1241 | |
| 1242 | /** |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1243 | * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit |
| 1244 | * @di: pointer to the ab8500_charger structure |
| 1245 | * @ich_in: charger input current limit |
| 1246 | * |
| 1247 | * Sets the current that can be drawn from the USB host |
| 1248 | * Returns error code in case of failure else 0(on success) |
| 1249 | */ |
| 1250 | static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, |
| 1251 | int ich_in) |
| 1252 | { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1253 | int min_value; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1254 | int ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1255 | |
| 1256 | /* We should always use to lowest current limit */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1257 | min_value = min(di->bm->chg_params->usb_curr_max, ich_in); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1258 | |
| 1259 | switch (min_value) { |
| 1260 | case 100: |
| 1261 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) |
| 1262 | min_value = USB_CH_IP_CUR_LVL_0P05; |
| 1263 | break; |
| 1264 | case 500: |
| 1265 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) |
| 1266 | min_value = USB_CH_IP_CUR_LVL_0P45; |
| 1267 | break; |
| 1268 | default: |
| 1269 | break; |
| 1270 | } |
| 1271 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1272 | dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); |
| 1273 | |
| 1274 | mutex_lock(&di->usb_ipt_crnt_lock); |
| 1275 | ret = ab8500_charger_set_current(di, min_value, |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1276 | AB8500_USBCH_IPT_CRNTLVL_REG); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1277 | mutex_unlock(&di->usb_ipt_crnt_lock); |
| 1278 | |
| 1279 | return ret; |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1280 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1281 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1282 | /** |
| 1283 | * ab8500_charger_set_main_in_curr() - set main charger input current |
| 1284 | * @di: pointer to the ab8500_charger structure |
| 1285 | * @ich_in: input charger current, in mA |
| 1286 | * |
| 1287 | * Set main charger input current. |
| 1288 | * Returns error code in case of failure else 0(on success) |
| 1289 | */ |
| 1290 | static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, |
| 1291 | int ich_in) |
| 1292 | { |
| 1293 | return ab8500_charger_set_current(di, ich_in, |
| 1294 | AB8500_MCH_IPT_CURLVL_REG); |
| 1295 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1296 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1297 | /** |
| 1298 | * ab8500_charger_set_output_curr() - set charger output current |
| 1299 | * @di: pointer to the ab8500_charger structure |
| 1300 | * @ich_out: output charger current, in mA |
| 1301 | * |
| 1302 | * Set charger output current. |
| 1303 | * Returns error code in case of failure else 0(on success) |
| 1304 | */ |
| 1305 | static int ab8500_charger_set_output_curr(struct ab8500_charger *di, |
| 1306 | int ich_out) |
| 1307 | { |
| 1308 | return ab8500_charger_set_current(di, ich_out, |
| 1309 | AB8500_CH_OPT_CRNTLVL_REG); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1310 | } |
| 1311 | |
| 1312 | /** |
| 1313 | * ab8500_charger_led_en() - turn on/off chargign led |
| 1314 | * @di: pointer to the ab8500_charger structure |
| 1315 | * @on: flag to turn on/off the chargign led |
| 1316 | * |
| 1317 | * Power ON/OFF charging LED indication |
| 1318 | * Returns error code in case of failure else 0(on success) |
| 1319 | */ |
| 1320 | static int ab8500_charger_led_en(struct ab8500_charger *di, int on) |
| 1321 | { |
| 1322 | int ret; |
| 1323 | |
| 1324 | if (on) { |
| 1325 | /* Power ON charging LED indicator, set LED current to 5mA */ |
| 1326 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1327 | AB8500_LED_INDICATOR_PWM_CTRL, |
| 1328 | (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); |
| 1329 | if (ret) { |
| 1330 | dev_err(di->dev, "Power ON LED failed\n"); |
| 1331 | return ret; |
| 1332 | } |
| 1333 | /* LED indicator PWM duty cycle 252/256 */ |
| 1334 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1335 | AB8500_LED_INDICATOR_PWM_DUTY, |
| 1336 | LED_INDICATOR_PWM_DUTY_252_256); |
| 1337 | if (ret) { |
| 1338 | dev_err(di->dev, "Set LED PWM duty cycle failed\n"); |
| 1339 | return ret; |
| 1340 | } |
| 1341 | } else { |
| 1342 | /* Power off charging LED indicator */ |
| 1343 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1344 | AB8500_LED_INDICATOR_PWM_CTRL, |
| 1345 | LED_INDICATOR_PWM_DIS); |
| 1346 | if (ret) { |
| 1347 | dev_err(di->dev, "Power-off LED failed\n"); |
| 1348 | return ret; |
| 1349 | } |
| 1350 | } |
| 1351 | |
| 1352 | return ret; |
| 1353 | } |
| 1354 | |
| 1355 | /** |
| 1356 | * ab8500_charger_ac_en() - enable or disable ac charging |
| 1357 | * @di: pointer to the ab8500_charger structure |
| 1358 | * @enable: enable/disable flag |
| 1359 | * @vset: charging voltage |
| 1360 | * @iset: charging current |
| 1361 | * |
| 1362 | * Enable/Disable AC/Mains charging and turns on/off the charging led |
| 1363 | * respectively. |
| 1364 | **/ |
| 1365 | static int ab8500_charger_ac_en(struct ux500_charger *charger, |
| 1366 | int enable, int vset, int iset) |
| 1367 | { |
| 1368 | int ret; |
| 1369 | int volt_index; |
| 1370 | int curr_index; |
| 1371 | int input_curr_index; |
| 1372 | u8 overshoot = 0; |
| 1373 | |
| 1374 | struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); |
| 1375 | |
| 1376 | if (enable) { |
| 1377 | /* Check if AC is connected */ |
| 1378 | if (!di->ac.charger_connected) { |
| 1379 | dev_err(di->dev, "AC charger not connected\n"); |
| 1380 | return -ENXIO; |
| 1381 | } |
| 1382 | |
| 1383 | /* Enable AC charging */ |
| 1384 | dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); |
| 1385 | |
| 1386 | /* |
| 1387 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts |
| 1388 | * will be triggered everytime we enable the VDD ADC supply. |
| 1389 | * This will turn off charging for a short while. |
| 1390 | * It can be avoided by having the supply on when |
| 1391 | * there is a charger enabled. Normally the VDD ADC supply |
| 1392 | * is enabled everytime a GPADC conversion is triggered. We will |
| 1393 | * force it to be enabled from this driver to have |
| 1394 | * the GPADC module independant of the AB8500 chargers |
| 1395 | */ |
| 1396 | if (!di->vddadc_en_ac) { |
| 1397 | regulator_enable(di->regu); |
| 1398 | di->vddadc_en_ac = true; |
| 1399 | } |
| 1400 | |
| 1401 | /* Check if the requested voltage or current is valid */ |
| 1402 | volt_index = ab8500_voltage_to_regval(vset); |
| 1403 | curr_index = ab8500_current_to_regval(iset); |
| 1404 | input_curr_index = ab8500_current_to_regval( |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1405 | di->bm->chg_params->ac_curr_max); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1406 | if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { |
| 1407 | dev_err(di->dev, |
| 1408 | "Charger voltage or current too high, " |
| 1409 | "charging not started\n"); |
| 1410 | return -ENXIO; |
| 1411 | } |
| 1412 | |
| 1413 | /* ChVoltLevel: maximum battery charging voltage */ |
| 1414 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1415 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); |
| 1416 | if (ret) { |
| 1417 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1418 | return ret; |
| 1419 | } |
| 1420 | /* MainChInputCurr: current that can be drawn from the charger*/ |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1421 | ret = ab8500_charger_set_main_in_curr(di, |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1422 | di->bm->chg_params->ac_curr_max); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1423 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1424 | dev_err(di->dev, "%s Failed to set MainChInputCurr\n", |
| 1425 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1426 | return ret; |
| 1427 | } |
| 1428 | /* ChOutputCurentLevel: protected output current */ |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1429 | ret = ab8500_charger_set_output_curr(di, iset); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1430 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1431 | dev_err(di->dev, "%s " |
| 1432 | "Failed to set ChOutputCurentLevel\n", |
| 1433 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1434 | return ret; |
| 1435 | } |
| 1436 | |
| 1437 | /* Check if VBAT overshoot control should be enabled */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1438 | if (!di->bm->enable_overshoot) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1439 | overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; |
| 1440 | |
| 1441 | /* Enable Main Charger */ |
| 1442 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1443 | AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); |
| 1444 | if (ret) { |
| 1445 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1446 | return ret; |
| 1447 | } |
| 1448 | |
| 1449 | /* Power on charging LED indication */ |
| 1450 | ret = ab8500_charger_led_en(di, true); |
| 1451 | if (ret < 0) |
| 1452 | dev_err(di->dev, "failed to enable LED\n"); |
| 1453 | |
| 1454 | di->ac.charger_online = 1; |
| 1455 | } else { |
| 1456 | /* Disable AC charging */ |
| 1457 | if (is_ab8500_1p1_or_earlier(di->parent)) { |
| 1458 | /* |
| 1459 | * For ABB revision 1.0 and 1.1 there is a bug in the |
| 1460 | * watchdog logic. That means we have to continously |
| 1461 | * kick the charger watchdog even when no charger is |
| 1462 | * connected. This is only valid once the AC charger |
| 1463 | * has been enabled. This is a bug that is not handled |
| 1464 | * by the algorithm and the watchdog have to be kicked |
| 1465 | * by the charger driver when the AC charger |
| 1466 | * is disabled |
| 1467 | */ |
| 1468 | if (di->ac_conn) { |
| 1469 | queue_delayed_work(di->charger_wq, |
| 1470 | &di->kick_wd_work, |
| 1471 | round_jiffies(WD_KICK_INTERVAL)); |
| 1472 | } |
| 1473 | |
| 1474 | /* |
| 1475 | * We can't turn off charging completely |
| 1476 | * due to a bug in AB8500 cut1. |
| 1477 | * If we do, charging will not start again. |
| 1478 | * That is why we set the lowest voltage |
| 1479 | * and current possible |
| 1480 | */ |
| 1481 | ret = abx500_set_register_interruptible(di->dev, |
| 1482 | AB8500_CHARGER, |
| 1483 | AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); |
| 1484 | if (ret) { |
| 1485 | dev_err(di->dev, |
| 1486 | "%s write failed\n", __func__); |
| 1487 | return ret; |
| 1488 | } |
| 1489 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1490 | ret = ab8500_charger_set_output_curr(di, 0); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1491 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1492 | dev_err(di->dev, "%s " |
| 1493 | "Failed to set ChOutputCurentLevel\n", |
| 1494 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1495 | return ret; |
| 1496 | } |
| 1497 | } else { |
| 1498 | ret = abx500_set_register_interruptible(di->dev, |
| 1499 | AB8500_CHARGER, |
| 1500 | AB8500_MCH_CTRL1, 0); |
| 1501 | if (ret) { |
| 1502 | dev_err(di->dev, |
| 1503 | "%s write failed\n", __func__); |
| 1504 | return ret; |
| 1505 | } |
| 1506 | } |
| 1507 | |
| 1508 | ret = ab8500_charger_led_en(di, false); |
| 1509 | if (ret < 0) |
| 1510 | dev_err(di->dev, "failed to disable LED\n"); |
| 1511 | |
| 1512 | di->ac.charger_online = 0; |
| 1513 | di->ac.wd_expired = false; |
| 1514 | |
| 1515 | /* Disable regulator if enabled */ |
| 1516 | if (di->vddadc_en_ac) { |
| 1517 | regulator_disable(di->regu); |
| 1518 | di->vddadc_en_ac = false; |
| 1519 | } |
| 1520 | |
| 1521 | dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); |
| 1522 | } |
| 1523 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1524 | |
| 1525 | return ret; |
| 1526 | } |
| 1527 | |
| 1528 | /** |
| 1529 | * ab8500_charger_usb_en() - enable usb charging |
| 1530 | * @di: pointer to the ab8500_charger structure |
| 1531 | * @enable: enable/disable flag |
| 1532 | * @vset: charging voltage |
| 1533 | * @ich_out: charger output current |
| 1534 | * |
| 1535 | * Enable/Disable USB charging and turns on/off the charging led respectively. |
| 1536 | * Returns error code in case of failure else 0(on success) |
| 1537 | */ |
| 1538 | static int ab8500_charger_usb_en(struct ux500_charger *charger, |
| 1539 | int enable, int vset, int ich_out) |
| 1540 | { |
| 1541 | int ret; |
| 1542 | int volt_index; |
| 1543 | int curr_index; |
| 1544 | u8 overshoot = 0; |
| 1545 | |
| 1546 | struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); |
| 1547 | |
| 1548 | if (enable) { |
| 1549 | /* Check if USB is connected */ |
| 1550 | if (!di->usb.charger_connected) { |
| 1551 | dev_err(di->dev, "USB charger not connected\n"); |
| 1552 | return -ENXIO; |
| 1553 | } |
| 1554 | |
| 1555 | /* |
| 1556 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts |
| 1557 | * will be triggered everytime we enable the VDD ADC supply. |
| 1558 | * This will turn off charging for a short while. |
| 1559 | * It can be avoided by having the supply on when |
| 1560 | * there is a charger enabled. Normally the VDD ADC supply |
| 1561 | * is enabled everytime a GPADC conversion is triggered. We will |
| 1562 | * force it to be enabled from this driver to have |
| 1563 | * the GPADC module independant of the AB8500 chargers |
| 1564 | */ |
| 1565 | if (!di->vddadc_en_usb) { |
| 1566 | regulator_enable(di->regu); |
| 1567 | di->vddadc_en_usb = true; |
| 1568 | } |
| 1569 | |
| 1570 | /* Enable USB charging */ |
| 1571 | dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); |
| 1572 | |
| 1573 | /* Check if the requested voltage or current is valid */ |
| 1574 | volt_index = ab8500_voltage_to_regval(vset); |
| 1575 | curr_index = ab8500_current_to_regval(ich_out); |
| 1576 | if (volt_index < 0 || curr_index < 0) { |
| 1577 | dev_err(di->dev, |
| 1578 | "Charger voltage or current too high, " |
| 1579 | "charging not started\n"); |
| 1580 | return -ENXIO; |
| 1581 | } |
| 1582 | |
| 1583 | /* ChVoltLevel: max voltage upto which battery can be charged */ |
| 1584 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1585 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); |
| 1586 | if (ret) { |
| 1587 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1588 | return ret; |
| 1589 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1590 | /* Check if VBAT overshoot control should be enabled */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1591 | if (!di->bm->enable_overshoot) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1592 | overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; |
| 1593 | |
| 1594 | /* Enable USB Charger */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1595 | dev_dbg(di->dev, |
| 1596 | "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1597 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1598 | AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); |
| 1599 | if (ret) { |
| 1600 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1601 | return ret; |
| 1602 | } |
| 1603 | |
| 1604 | /* If success power on charging LED indication */ |
| 1605 | ret = ab8500_charger_led_en(di, true); |
| 1606 | if (ret < 0) |
| 1607 | dev_err(di->dev, "failed to enable LED\n"); |
| 1608 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1609 | di->usb.charger_online = 1; |
| 1610 | |
| 1611 | /* USBChInputCurr: current that can be drawn from the usb */ |
| 1612 | ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 1613 | if (ret) { |
| 1614 | dev_err(di->dev, "setting USBChInputCurr failed\n"); |
| 1615 | return ret; |
| 1616 | } |
| 1617 | |
| 1618 | /* ChOutputCurentLevel: protected output current */ |
| 1619 | ret = ab8500_charger_set_output_curr(di, ich_out); |
| 1620 | if (ret) { |
| 1621 | dev_err(di->dev, "%s " |
| 1622 | "Failed to set ChOutputCurentLevel\n", |
| 1623 | __func__); |
| 1624 | return ret; |
| 1625 | } |
| 1626 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1627 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); |
| 1628 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1629 | } else { |
| 1630 | /* Disable USB charging */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1631 | dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1632 | ret = abx500_set_register_interruptible(di->dev, |
| 1633 | AB8500_CHARGER, |
| 1634 | AB8500_USBCH_CTRL1_REG, 0); |
| 1635 | if (ret) { |
| 1636 | dev_err(di->dev, |
| 1637 | "%s write failed\n", __func__); |
| 1638 | return ret; |
| 1639 | } |
| 1640 | |
| 1641 | ret = ab8500_charger_led_en(di, false); |
| 1642 | if (ret < 0) |
| 1643 | dev_err(di->dev, "failed to disable LED\n"); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1644 | /* USBChInputCurr: current that can be drawn from the usb */ |
| 1645 | ret = ab8500_charger_set_vbus_in_curr(di, 0); |
| 1646 | if (ret) { |
| 1647 | dev_err(di->dev, "setting USBChInputCurr failed\n"); |
| 1648 | return ret; |
| 1649 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1650 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1651 | /* ChOutputCurentLevel: protected output current */ |
| 1652 | ret = ab8500_charger_set_output_curr(di, 0); |
| 1653 | if (ret) { |
| 1654 | dev_err(di->dev, "%s " |
| 1655 | "Failed to reset ChOutputCurentLevel\n", |
| 1656 | __func__); |
| 1657 | return ret; |
| 1658 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1659 | di->usb.charger_online = 0; |
| 1660 | di->usb.wd_expired = false; |
| 1661 | |
| 1662 | /* Disable regulator if enabled */ |
| 1663 | if (di->vddadc_en_usb) { |
| 1664 | regulator_disable(di->regu); |
| 1665 | di->vddadc_en_usb = false; |
| 1666 | } |
| 1667 | |
| 1668 | dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); |
| 1669 | |
| 1670 | /* Cancel any pending Vbat check work */ |
| 1671 | if (delayed_work_pending(&di->check_vbat_work)) |
| 1672 | cancel_delayed_work(&di->check_vbat_work); |
| 1673 | |
| 1674 | } |
| 1675 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1676 | |
| 1677 | return ret; |
| 1678 | } |
| 1679 | |
| 1680 | /** |
| 1681 | * ab8500_charger_watchdog_kick() - kick charger watchdog |
| 1682 | * @di: pointer to the ab8500_charger structure |
| 1683 | * |
| 1684 | * Kick charger watchdog |
| 1685 | * Returns error code in case of failure else 0(on success) |
| 1686 | */ |
| 1687 | static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) |
| 1688 | { |
| 1689 | int ret; |
| 1690 | struct ab8500_charger *di; |
| 1691 | |
| 1692 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) |
| 1693 | di = to_ab8500_charger_ac_device_info(charger); |
| 1694 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) |
| 1695 | di = to_ab8500_charger_usb_device_info(charger); |
| 1696 | else |
| 1697 | return -ENXIO; |
| 1698 | |
| 1699 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1700 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 1701 | if (ret) |
| 1702 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 1703 | |
| 1704 | return ret; |
| 1705 | } |
| 1706 | |
| 1707 | /** |
| 1708 | * ab8500_charger_update_charger_current() - update charger current |
| 1709 | * @di: pointer to the ab8500_charger structure |
| 1710 | * |
| 1711 | * Update the charger output current for the specified charger |
| 1712 | * Returns error code in case of failure else 0(on success) |
| 1713 | */ |
| 1714 | static int ab8500_charger_update_charger_current(struct ux500_charger *charger, |
| 1715 | int ich_out) |
| 1716 | { |
| 1717 | int ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1718 | struct ab8500_charger *di; |
| 1719 | |
| 1720 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) |
| 1721 | di = to_ab8500_charger_ac_device_info(charger); |
| 1722 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) |
| 1723 | di = to_ab8500_charger_usb_device_info(charger); |
| 1724 | else |
| 1725 | return -ENXIO; |
| 1726 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1727 | ret = ab8500_charger_set_output_curr(di, ich_out); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1728 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1729 | dev_err(di->dev, "%s " |
| 1730 | "Failed to set ChOutputCurentLevel\n", |
| 1731 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1732 | return ret; |
| 1733 | } |
| 1734 | |
| 1735 | /* Reset the main and usb drop input current measurement counter */ |
| 1736 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1737 | AB8500_CHARGER_CTRL, |
| 1738 | 0x1); |
| 1739 | if (ret) { |
| 1740 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1741 | return ret; |
| 1742 | } |
| 1743 | |
| 1744 | return ret; |
| 1745 | } |
| 1746 | |
| 1747 | static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) |
| 1748 | { |
| 1749 | struct power_supply *psy; |
| 1750 | struct power_supply *ext; |
| 1751 | struct ab8500_charger *di; |
| 1752 | union power_supply_propval ret; |
| 1753 | int i, j; |
| 1754 | bool psy_found = false; |
| 1755 | struct ux500_charger *usb_chg; |
| 1756 | |
| 1757 | usb_chg = (struct ux500_charger *)data; |
| 1758 | psy = &usb_chg->psy; |
| 1759 | |
| 1760 | di = to_ab8500_charger_usb_device_info(usb_chg); |
| 1761 | |
| 1762 | ext = dev_get_drvdata(dev); |
| 1763 | |
| 1764 | /* For all psy where the driver name appears in any supplied_to */ |
| 1765 | for (i = 0; i < ext->num_supplicants; i++) { |
| 1766 | if (!strcmp(ext->supplied_to[i], psy->name)) |
| 1767 | psy_found = true; |
| 1768 | } |
| 1769 | |
| 1770 | if (!psy_found) |
| 1771 | return 0; |
| 1772 | |
| 1773 | /* Go through all properties for the psy */ |
| 1774 | for (j = 0; j < ext->num_properties; j++) { |
| 1775 | enum power_supply_property prop; |
| 1776 | prop = ext->properties[j]; |
| 1777 | |
| 1778 | if (ext->get_property(ext, prop, &ret)) |
| 1779 | continue; |
| 1780 | |
| 1781 | switch (prop) { |
| 1782 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 1783 | switch (ext->type) { |
| 1784 | case POWER_SUPPLY_TYPE_BATTERY: |
| 1785 | di->vbat = ret.intval / 1000; |
| 1786 | break; |
| 1787 | default: |
| 1788 | break; |
| 1789 | } |
| 1790 | break; |
| 1791 | default: |
| 1792 | break; |
| 1793 | } |
| 1794 | } |
| 1795 | return 0; |
| 1796 | } |
| 1797 | |
| 1798 | /** |
| 1799 | * ab8500_charger_check_vbat_work() - keep vbus current within spec |
| 1800 | * @work pointer to the work_struct structure |
| 1801 | * |
| 1802 | * Due to a asic bug it is necessary to lower the input current to the vbus |
| 1803 | * charger when charging with at some specific levels. This issue is only valid |
| 1804 | * for below a certain battery voltage. This function makes sure that the |
| 1805 | * the allowed current limit isn't exceeded. |
| 1806 | */ |
| 1807 | static void ab8500_charger_check_vbat_work(struct work_struct *work) |
| 1808 | { |
| 1809 | int t = 10; |
| 1810 | struct ab8500_charger *di = container_of(work, |
| 1811 | struct ab8500_charger, check_vbat_work.work); |
| 1812 | |
| 1813 | class_for_each_device(power_supply_class, NULL, |
| 1814 | &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); |
| 1815 | |
| 1816 | /* First run old_vbat is 0. */ |
| 1817 | if (di->old_vbat == 0) |
| 1818 | di->old_vbat = di->vbat; |
| 1819 | |
| 1820 | if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && |
| 1821 | di->vbat <= VBAT_TRESH_IP_CUR_RED) || |
| 1822 | (di->old_vbat > VBAT_TRESH_IP_CUR_RED && |
| 1823 | di->vbat > VBAT_TRESH_IP_CUR_RED))) { |
| 1824 | |
| 1825 | dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," |
| 1826 | " old: %d\n", di->max_usb_in_curr, di->vbat, |
| 1827 | di->old_vbat); |
| 1828 | ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 1829 | power_supply_changed(&di->usb_chg.psy); |
| 1830 | } |
| 1831 | |
| 1832 | di->old_vbat = di->vbat; |
| 1833 | |
| 1834 | /* |
| 1835 | * No need to check the battery voltage every second when not close to |
| 1836 | * the threshold. |
| 1837 | */ |
| 1838 | if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && |
| 1839 | (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) |
| 1840 | t = 1; |
| 1841 | |
| 1842 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); |
| 1843 | } |
| 1844 | |
| 1845 | /** |
| 1846 | * ab8500_charger_check_hw_failure_work() - check main charger failure |
| 1847 | * @work: pointer to the work_struct structure |
| 1848 | * |
| 1849 | * Work queue function for checking the main charger status |
| 1850 | */ |
| 1851 | static void ab8500_charger_check_hw_failure_work(struct work_struct *work) |
| 1852 | { |
| 1853 | int ret; |
| 1854 | u8 reg_value; |
| 1855 | |
| 1856 | struct ab8500_charger *di = container_of(work, |
| 1857 | struct ab8500_charger, check_hw_failure_work.work); |
| 1858 | |
| 1859 | /* Check if the status bits for HW failure is still active */ |
| 1860 | if (di->flags.mainextchnotok) { |
| 1861 | ret = abx500_get_register_interruptible(di->dev, |
| 1862 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); |
| 1863 | if (ret < 0) { |
| 1864 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1865 | return; |
| 1866 | } |
| 1867 | if (!(reg_value & MAIN_CH_NOK)) { |
| 1868 | di->flags.mainextchnotok = false; |
| 1869 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1870 | } |
| 1871 | } |
| 1872 | if (di->flags.vbus_ovv) { |
| 1873 | ret = abx500_get_register_interruptible(di->dev, |
| 1874 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, |
| 1875 | ®_value); |
| 1876 | if (ret < 0) { |
| 1877 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1878 | return; |
| 1879 | } |
| 1880 | if (!(reg_value & VBUS_OVV_TH)) { |
| 1881 | di->flags.vbus_ovv = false; |
| 1882 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1883 | } |
| 1884 | } |
| 1885 | /* If we still have a failure, schedule a new check */ |
| 1886 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { |
| 1887 | queue_delayed_work(di->charger_wq, |
| 1888 | &di->check_hw_failure_work, round_jiffies(HZ)); |
| 1889 | } |
| 1890 | } |
| 1891 | |
| 1892 | /** |
| 1893 | * ab8500_charger_kick_watchdog_work() - kick the watchdog |
| 1894 | * @work: pointer to the work_struct structure |
| 1895 | * |
| 1896 | * Work queue function for kicking the charger watchdog. |
| 1897 | * |
| 1898 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 1899 | * logic. That means we have to continously kick the charger |
| 1900 | * watchdog even when no charger is connected. This is only |
| 1901 | * valid once the AC charger has been enabled. This is |
| 1902 | * a bug that is not handled by the algorithm and the |
| 1903 | * watchdog have to be kicked by the charger driver |
| 1904 | * when the AC charger is disabled |
| 1905 | */ |
| 1906 | static void ab8500_charger_kick_watchdog_work(struct work_struct *work) |
| 1907 | { |
| 1908 | int ret; |
| 1909 | |
| 1910 | struct ab8500_charger *di = container_of(work, |
| 1911 | struct ab8500_charger, kick_wd_work.work); |
| 1912 | |
| 1913 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1914 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 1915 | if (ret) |
| 1916 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 1917 | |
| 1918 | /* Schedule a new watchdog kick */ |
| 1919 | queue_delayed_work(di->charger_wq, |
| 1920 | &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); |
| 1921 | } |
| 1922 | |
| 1923 | /** |
| 1924 | * ab8500_charger_ac_work() - work to get and set main charger status |
| 1925 | * @work: pointer to the work_struct structure |
| 1926 | * |
| 1927 | * Work queue function for checking the main charger status |
| 1928 | */ |
| 1929 | static void ab8500_charger_ac_work(struct work_struct *work) |
| 1930 | { |
| 1931 | int ret; |
| 1932 | |
| 1933 | struct ab8500_charger *di = container_of(work, |
| 1934 | struct ab8500_charger, ac_work); |
| 1935 | |
| 1936 | /* |
| 1937 | * Since we can't be sure that the events are received |
| 1938 | * synchronously, we have the check if the main charger is |
| 1939 | * connected by reading the status register |
| 1940 | */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 1941 | ret = ab8500_charger_detect_chargers(di, false); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1942 | if (ret < 0) |
| 1943 | return; |
| 1944 | |
| 1945 | if (ret & AC_PW_CONN) { |
| 1946 | di->ac.charger_connected = 1; |
| 1947 | di->ac_conn = true; |
| 1948 | } else { |
| 1949 | di->ac.charger_connected = 0; |
| 1950 | } |
| 1951 | |
| 1952 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1953 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); |
| 1954 | } |
| 1955 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 1956 | static void ab8500_charger_usb_attached_work(struct work_struct *work) |
| 1957 | { |
| 1958 | struct ab8500_charger *di = container_of(work, |
| 1959 | struct ab8500_charger, |
| 1960 | usb_charger_attached_work.work); |
| 1961 | int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC); |
| 1962 | int ret, i; |
| 1963 | u8 statval; |
| 1964 | |
| 1965 | for (i = 0; i < 10; i++) { |
| 1966 | ret = abx500_get_register_interruptible(di->dev, |
| 1967 | AB8500_CHARGER, |
| 1968 | AB8500_CH_USBCH_STAT1_REG, |
| 1969 | &statval); |
| 1970 | if (ret < 0) { |
| 1971 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); |
| 1972 | goto reschedule; |
| 1973 | } |
| 1974 | if ((statval & usbch) != usbch) |
| 1975 | goto reschedule; |
| 1976 | |
| 1977 | msleep(CHARGER_STATUS_POLL); |
| 1978 | } |
| 1979 | |
| 1980 | ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0); |
| 1981 | |
| 1982 | mutex_lock(&di->charger_attached_mutex); |
| 1983 | mutex_unlock(&di->charger_attached_mutex); |
| 1984 | |
| 1985 | return; |
| 1986 | |
| 1987 | reschedule: |
| 1988 | queue_delayed_work(di->charger_wq, |
| 1989 | &di->usb_charger_attached_work, |
| 1990 | HZ); |
| 1991 | } |
| 1992 | |
| 1993 | static void ab8500_charger_ac_attached_work(struct work_struct *work) |
| 1994 | { |
| 1995 | |
| 1996 | struct ab8500_charger *di = container_of(work, |
| 1997 | struct ab8500_charger, |
| 1998 | ac_charger_attached_work.work); |
| 1999 | int mainch = (MAIN_CH_STATUS2_MAINCHGDROP | |
| 2000 | MAIN_CH_STATUS2_MAINCHARGERDETDBNC); |
| 2001 | int ret, i; |
| 2002 | u8 statval; |
| 2003 | |
| 2004 | for (i = 0; i < 10; i++) { |
| 2005 | ret = abx500_get_register_interruptible(di->dev, |
| 2006 | AB8500_CHARGER, |
| 2007 | AB8500_CH_STATUS2_REG, |
| 2008 | &statval); |
| 2009 | if (ret < 0) { |
| 2010 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); |
| 2011 | goto reschedule; |
| 2012 | } |
| 2013 | |
| 2014 | if ((statval & mainch) != mainch) |
| 2015 | goto reschedule; |
| 2016 | |
| 2017 | msleep(CHARGER_STATUS_POLL); |
| 2018 | } |
| 2019 | |
| 2020 | ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0); |
| 2021 | queue_work(di->charger_wq, &di->ac_work); |
| 2022 | |
| 2023 | mutex_lock(&di->charger_attached_mutex); |
| 2024 | mutex_unlock(&di->charger_attached_mutex); |
| 2025 | |
| 2026 | return; |
| 2027 | |
| 2028 | reschedule: |
| 2029 | queue_delayed_work(di->charger_wq, |
| 2030 | &di->ac_charger_attached_work, |
| 2031 | HZ); |
| 2032 | } |
| 2033 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2034 | /** |
| 2035 | * ab8500_charger_detect_usb_type_work() - work to detect USB type |
| 2036 | * @work: Pointer to the work_struct structure |
| 2037 | * |
| 2038 | * Detect the type of USB plugged |
| 2039 | */ |
Anton Vorontsov | 64eb9b0 | 2012-03-14 04:43:11 +0400 | [diff] [blame] | 2040 | static void ab8500_charger_detect_usb_type_work(struct work_struct *work) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2041 | { |
| 2042 | int ret; |
| 2043 | |
| 2044 | struct ab8500_charger *di = container_of(work, |
| 2045 | struct ab8500_charger, detect_usb_type_work); |
| 2046 | |
| 2047 | /* |
| 2048 | * Since we can't be sure that the events are received |
| 2049 | * synchronously, we have the check if is |
| 2050 | * connected by reading the status register |
| 2051 | */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2052 | ret = ab8500_charger_detect_chargers(di, false); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2053 | if (ret < 0) |
| 2054 | return; |
| 2055 | |
| 2056 | if (!(ret & USB_PW_CONN)) { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2057 | dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); |
| 2058 | di->vbus_detected = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2059 | ab8500_charger_set_usb_connected(di, false); |
| 2060 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2061 | } else { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2062 | dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); |
| 2063 | di->vbus_detected = true; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2064 | |
| 2065 | if (is_ab8500_1p1_or_earlier(di->parent)) { |
| 2066 | ret = ab8500_charger_detect_usb_type(di); |
| 2067 | if (!ret) { |
| 2068 | ab8500_charger_set_usb_connected(di, true); |
| 2069 | ab8500_power_supply_changed(di, |
| 2070 | &di->usb_chg.psy); |
| 2071 | } |
| 2072 | } else { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2073 | /* |
| 2074 | * For ABB cut2.0 and onwards we have an IRQ, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2075 | * USB_LINK_STATUS that will be triggered when the USB |
| 2076 | * link status changes. The exception is USB connected |
| 2077 | * during startup. Then we don't get a |
| 2078 | * USB_LINK_STATUS IRQ |
| 2079 | */ |
| 2080 | if (di->vbus_detected_start) { |
| 2081 | di->vbus_detected_start = false; |
| 2082 | ret = ab8500_charger_detect_usb_type(di); |
| 2083 | if (!ret) { |
| 2084 | ab8500_charger_set_usb_connected(di, |
| 2085 | true); |
| 2086 | ab8500_power_supply_changed(di, |
| 2087 | &di->usb_chg.psy); |
| 2088 | } |
| 2089 | } |
| 2090 | } |
| 2091 | } |
| 2092 | } |
| 2093 | |
| 2094 | /** |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2095 | * ab8500_charger_usb_link_attach_work() - work to detect USB type |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 2096 | * @work: pointer to the work_struct structure |
| 2097 | * |
| 2098 | * Detect the type of USB plugged |
| 2099 | */ |
| 2100 | static void ab8500_charger_usb_link_attach_work(struct work_struct *work) |
| 2101 | { |
| 2102 | struct ab8500_charger *di = |
| 2103 | container_of(work, struct ab8500_charger, attach_work.work); |
| 2104 | int ret; |
| 2105 | |
| 2106 | /* Update maximum input current if USB enumeration is not detected */ |
| 2107 | if (!di->usb.charger_online) { |
| 2108 | ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 2109 | if (ret) |
| 2110 | return; |
| 2111 | } |
| 2112 | |
| 2113 | ab8500_charger_set_usb_connected(di, true); |
| 2114 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2115 | } |
| 2116 | |
| 2117 | /** |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2118 | * ab8500_charger_usb_link_status_work() - work to detect USB type |
| 2119 | * @work: pointer to the work_struct structure |
| 2120 | * |
| 2121 | * Detect the type of USB plugged |
| 2122 | */ |
| 2123 | static void ab8500_charger_usb_link_status_work(struct work_struct *work) |
| 2124 | { |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 2125 | int detected_chargers; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2126 | int ret; |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 2127 | u8 val; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2128 | |
| 2129 | struct ab8500_charger *di = container_of(work, |
| 2130 | struct ab8500_charger, usb_link_status_work); |
| 2131 | |
| 2132 | /* |
| 2133 | * Since we can't be sure that the events are received |
| 2134 | * synchronously, we have the check if is |
| 2135 | * connected by reading the status register |
| 2136 | */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2137 | detected_chargers = ab8500_charger_detect_chargers(di, false); |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 2138 | if (detected_chargers < 0) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2139 | return; |
| 2140 | |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 2141 | /* |
| 2142 | * Some chargers that breaks the USB spec is |
| 2143 | * identified as invalid by AB8500 and it refuse |
| 2144 | * to start the charging process. but by jumping |
| 2145 | * thru a few hoops it can be forced to start. |
| 2146 | */ |
| 2147 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
| 2148 | AB8500_USB_LINE_STAT_REG, &val); |
| 2149 | if (ret >= 0) |
| 2150 | dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); |
| 2151 | else |
| 2152 | dev_dbg(di->dev, "Error reading USB link status\n"); |
| 2153 | |
| 2154 | if (detected_chargers & USB_PW_CONN) { |
| 2155 | if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK && |
| 2156 | di->invalid_charger_detect_state == 0) { |
| 2157 | dev_dbg(di->dev, "Invalid charger detected, state= 0\n"); |
| 2158 | /*Enable charger*/ |
| 2159 | abx500_mask_and_set_register_interruptible(di->dev, |
| 2160 | AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01); |
| 2161 | /*Enable charger detection*/ |
| 2162 | abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, |
| 2163 | AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01); |
| 2164 | di->invalid_charger_detect_state = 1; |
| 2165 | /*exit and wait for new link status interrupt.*/ |
| 2166 | return; |
| 2167 | |
| 2168 | } |
| 2169 | if (di->invalid_charger_detect_state == 1) { |
| 2170 | dev_dbg(di->dev, "Invalid charger detected, state= 1\n"); |
| 2171 | /*Stop charger detection*/ |
| 2172 | abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, |
| 2173 | AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00); |
| 2174 | /*Check link status*/ |
| 2175 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
| 2176 | AB8500_USB_LINE_STAT_REG, &val); |
| 2177 | dev_dbg(di->dev, "USB link status= 0x%02x\n", |
| 2178 | (val & AB8500_USB_LINK_STATUS) >> 3); |
| 2179 | di->invalid_charger_detect_state = 2; |
| 2180 | } |
| 2181 | } else { |
| 2182 | di->invalid_charger_detect_state = 0; |
| 2183 | } |
| 2184 | |
| 2185 | if (!(detected_chargers & USB_PW_CONN)) { |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2186 | di->vbus_detected = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2187 | ab8500_charger_set_usb_connected(di, false); |
| 2188 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 2189 | return; |
| 2190 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2191 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2192 | dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); |
| 2193 | di->vbus_detected = true; |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 2194 | ret = ab8500_charger_read_usb_type(di); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2195 | if (ret) { |
| 2196 | if (ret == -ENXIO) { |
| 2197 | /* No valid charger type detected */ |
| 2198 | ab8500_charger_set_usb_connected(di, false); |
| 2199 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2200 | } |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2201 | return; |
| 2202 | } |
| 2203 | |
| 2204 | if (di->usb_device_is_unrecognised) { |
| 2205 | dev_dbg(di->dev, |
| 2206 | "Potential Legacy Charger device. " |
| 2207 | "Delay work for %d msec for USB enum " |
| 2208 | "to finish", |
| 2209 | WAIT_ACA_RID_ENUMERATION); |
| 2210 | queue_delayed_work(di->charger_wq, |
| 2211 | &di->attach_work, |
| 2212 | msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); |
| 2213 | } else if (di->is_aca_rid == 1) { |
| 2214 | /* Only wait once */ |
| 2215 | di->is_aca_rid++; |
| 2216 | dev_dbg(di->dev, |
| 2217 | "%s Wait %d msec for USB enum to finish", |
| 2218 | __func__, WAIT_ACA_RID_ENUMERATION); |
| 2219 | queue_delayed_work(di->charger_wq, |
| 2220 | &di->attach_work, |
| 2221 | msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); |
| 2222 | } else { |
| 2223 | queue_delayed_work(di->charger_wq, |
| 2224 | &di->attach_work, |
| 2225 | 0); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2226 | } |
| 2227 | } |
| 2228 | |
| 2229 | static void ab8500_charger_usb_state_changed_work(struct work_struct *work) |
| 2230 | { |
| 2231 | int ret; |
| 2232 | unsigned long flags; |
| 2233 | |
| 2234 | struct ab8500_charger *di = container_of(work, |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2235 | struct ab8500_charger, usb_state_changed_work.work); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2236 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2237 | if (!di->vbus_detected) { |
| 2238 | dev_dbg(di->dev, |
| 2239 | "%s !di->vbus_detected\n", |
| 2240 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2241 | return; |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2242 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2243 | |
| 2244 | spin_lock_irqsave(&di->usb_state.usb_lock, flags); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2245 | di->usb_state.state = di->usb_state.state_tmp; |
| 2246 | di->usb_state.usb_current = di->usb_state.usb_current_tmp; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2247 | spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); |
| 2248 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2249 | dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", |
| 2250 | __func__, di->usb_state.state, di->usb_state.usb_current); |
| 2251 | |
| 2252 | switch (di->usb_state.state) { |
| 2253 | case AB8500_BM_USB_STATE_RESET_HS: |
| 2254 | case AB8500_BM_USB_STATE_RESET_FS: |
| 2255 | case AB8500_BM_USB_STATE_SUSPEND: |
| 2256 | case AB8500_BM_USB_STATE_MAX: |
| 2257 | ab8500_charger_set_usb_connected(di, false); |
| 2258 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2259 | break; |
| 2260 | |
| 2261 | case AB8500_BM_USB_STATE_RESUME: |
| 2262 | /* |
| 2263 | * when suspend->resume there should be delay |
| 2264 | * of 1sec for enabling charging |
| 2265 | */ |
| 2266 | msleep(1000); |
| 2267 | /* Intentional fall through */ |
| 2268 | case AB8500_BM_USB_STATE_CONFIGURED: |
| 2269 | /* |
| 2270 | * USB is configured, enable charging with the charging |
| 2271 | * input current obtained from USB driver |
| 2272 | */ |
| 2273 | if (!ab8500_charger_get_usb_cur(di)) { |
| 2274 | /* Update maximum input current */ |
| 2275 | ret = ab8500_charger_set_vbus_in_curr(di, |
| 2276 | di->max_usb_in_curr); |
| 2277 | if (ret) |
| 2278 | return; |
| 2279 | |
| 2280 | ab8500_charger_set_usb_connected(di, true); |
| 2281 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2282 | } |
| 2283 | break; |
| 2284 | |
| 2285 | default: |
| 2286 | break; |
| 2287 | }; |
| 2288 | } |
| 2289 | |
| 2290 | /** |
| 2291 | * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status |
| 2292 | * @work: pointer to the work_struct structure |
| 2293 | * |
| 2294 | * Work queue function for checking the USB charger Not OK status |
| 2295 | */ |
| 2296 | static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) |
| 2297 | { |
| 2298 | int ret; |
| 2299 | u8 reg_value; |
| 2300 | bool prev_status; |
| 2301 | |
| 2302 | struct ab8500_charger *di = container_of(work, |
| 2303 | struct ab8500_charger, check_usbchgnotok_work.work); |
| 2304 | |
| 2305 | /* Check if the status bit for usbchargernotok is still active */ |
| 2306 | ret = abx500_get_register_interruptible(di->dev, |
| 2307 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); |
| 2308 | if (ret < 0) { |
| 2309 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 2310 | return; |
| 2311 | } |
| 2312 | prev_status = di->flags.usbchargernotok; |
| 2313 | |
| 2314 | if (reg_value & VBUS_CH_NOK) { |
| 2315 | di->flags.usbchargernotok = true; |
| 2316 | /* Check again in 1sec */ |
| 2317 | queue_delayed_work(di->charger_wq, |
| 2318 | &di->check_usbchgnotok_work, HZ); |
| 2319 | } else { |
| 2320 | di->flags.usbchargernotok = false; |
| 2321 | di->flags.vbus_collapse = false; |
| 2322 | } |
| 2323 | |
| 2324 | if (prev_status != di->flags.usbchargernotok) |
| 2325 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2326 | } |
| 2327 | |
| 2328 | /** |
| 2329 | * ab8500_charger_check_main_thermal_prot_work() - check main thermal status |
| 2330 | * @work: pointer to the work_struct structure |
| 2331 | * |
| 2332 | * Work queue function for checking the Main thermal prot status |
| 2333 | */ |
| 2334 | static void ab8500_charger_check_main_thermal_prot_work( |
| 2335 | struct work_struct *work) |
| 2336 | { |
| 2337 | int ret; |
| 2338 | u8 reg_value; |
| 2339 | |
| 2340 | struct ab8500_charger *di = container_of(work, |
| 2341 | struct ab8500_charger, check_main_thermal_prot_work); |
| 2342 | |
| 2343 | /* Check if the status bit for main_thermal_prot is still active */ |
| 2344 | ret = abx500_get_register_interruptible(di->dev, |
| 2345 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); |
| 2346 | if (ret < 0) { |
| 2347 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 2348 | return; |
| 2349 | } |
| 2350 | if (reg_value & MAIN_CH_TH_PROT) |
| 2351 | di->flags.main_thermal_prot = true; |
| 2352 | else |
| 2353 | di->flags.main_thermal_prot = false; |
| 2354 | |
| 2355 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2356 | } |
| 2357 | |
| 2358 | /** |
| 2359 | * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status |
| 2360 | * @work: pointer to the work_struct structure |
| 2361 | * |
| 2362 | * Work queue function for checking the USB thermal prot status |
| 2363 | */ |
| 2364 | static void ab8500_charger_check_usb_thermal_prot_work( |
| 2365 | struct work_struct *work) |
| 2366 | { |
| 2367 | int ret; |
| 2368 | u8 reg_value; |
| 2369 | |
| 2370 | struct ab8500_charger *di = container_of(work, |
| 2371 | struct ab8500_charger, check_usb_thermal_prot_work); |
| 2372 | |
| 2373 | /* Check if the status bit for usb_thermal_prot is still active */ |
| 2374 | ret = abx500_get_register_interruptible(di->dev, |
| 2375 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); |
| 2376 | if (ret < 0) { |
| 2377 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 2378 | return; |
| 2379 | } |
| 2380 | if (reg_value & USB_CH_TH_PROT) |
| 2381 | di->flags.usb_thermal_prot = true; |
| 2382 | else |
| 2383 | di->flags.usb_thermal_prot = false; |
| 2384 | |
| 2385 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2386 | } |
| 2387 | |
| 2388 | /** |
| 2389 | * ab8500_charger_mainchunplugdet_handler() - main charger unplugged |
| 2390 | * @irq: interrupt number |
| 2391 | * @_di: pointer to the ab8500_charger structure |
| 2392 | * |
| 2393 | * Returns IRQ status(IRQ_HANDLED) |
| 2394 | */ |
| 2395 | static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) |
| 2396 | { |
| 2397 | struct ab8500_charger *di = _di; |
| 2398 | |
| 2399 | dev_dbg(di->dev, "Main charger unplugged\n"); |
| 2400 | queue_work(di->charger_wq, &di->ac_work); |
| 2401 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 2402 | cancel_delayed_work_sync(&di->ac_charger_attached_work); |
| 2403 | mutex_lock(&di->charger_attached_mutex); |
| 2404 | mutex_unlock(&di->charger_attached_mutex); |
| 2405 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2406 | return IRQ_HANDLED; |
| 2407 | } |
| 2408 | |
| 2409 | /** |
| 2410 | * ab8500_charger_mainchplugdet_handler() - main charger plugged |
| 2411 | * @irq: interrupt number |
| 2412 | * @_di: pointer to the ab8500_charger structure |
| 2413 | * |
| 2414 | * Returns IRQ status(IRQ_HANDLED) |
| 2415 | */ |
| 2416 | static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) |
| 2417 | { |
| 2418 | struct ab8500_charger *di = _di; |
| 2419 | |
| 2420 | dev_dbg(di->dev, "Main charger plugged\n"); |
| 2421 | queue_work(di->charger_wq, &di->ac_work); |
| 2422 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 2423 | mutex_lock(&di->charger_attached_mutex); |
| 2424 | mutex_unlock(&di->charger_attached_mutex); |
| 2425 | queue_delayed_work(di->charger_wq, |
| 2426 | &di->ac_charger_attached_work, |
| 2427 | HZ); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2428 | return IRQ_HANDLED; |
| 2429 | } |
| 2430 | |
| 2431 | /** |
| 2432 | * ab8500_charger_mainextchnotok_handler() - main charger not ok |
| 2433 | * @irq: interrupt number |
| 2434 | * @_di: pointer to the ab8500_charger structure |
| 2435 | * |
| 2436 | * Returns IRQ status(IRQ_HANDLED) |
| 2437 | */ |
| 2438 | static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) |
| 2439 | { |
| 2440 | struct ab8500_charger *di = _di; |
| 2441 | |
| 2442 | dev_dbg(di->dev, "Main charger not ok\n"); |
| 2443 | di->flags.mainextchnotok = true; |
| 2444 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2445 | |
| 2446 | /* Schedule a new HW failure check */ |
| 2447 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); |
| 2448 | |
| 2449 | return IRQ_HANDLED; |
| 2450 | } |
| 2451 | |
| 2452 | /** |
| 2453 | * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger |
| 2454 | * thermal protection threshold |
| 2455 | * @irq: interrupt number |
| 2456 | * @_di: pointer to the ab8500_charger structure |
| 2457 | * |
| 2458 | * Returns IRQ status(IRQ_HANDLED) |
| 2459 | */ |
| 2460 | static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) |
| 2461 | { |
| 2462 | struct ab8500_charger *di = _di; |
| 2463 | |
| 2464 | dev_dbg(di->dev, |
| 2465 | "Die temp above Main charger thermal protection threshold\n"); |
| 2466 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); |
| 2467 | |
| 2468 | return IRQ_HANDLED; |
| 2469 | } |
| 2470 | |
| 2471 | /** |
| 2472 | * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger |
| 2473 | * thermal protection threshold |
| 2474 | * @irq: interrupt number |
| 2475 | * @_di: pointer to the ab8500_charger structure |
| 2476 | * |
| 2477 | * Returns IRQ status(IRQ_HANDLED) |
| 2478 | */ |
| 2479 | static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) |
| 2480 | { |
| 2481 | struct ab8500_charger *di = _di; |
| 2482 | |
| 2483 | dev_dbg(di->dev, |
| 2484 | "Die temp ok for Main charger thermal protection threshold\n"); |
| 2485 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); |
| 2486 | |
| 2487 | return IRQ_HANDLED; |
| 2488 | } |
| 2489 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2490 | static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) |
| 2491 | { |
| 2492 | struct ab8500_charger *di = container_of(work, |
| 2493 | struct ab8500_charger, vbus_drop_end_work.work); |
| 2494 | |
| 2495 | di->flags.vbus_drop_end = false; |
| 2496 | |
| 2497 | /* Reset the drop counter */ |
| 2498 | abx500_set_register_interruptible(di->dev, |
| 2499 | AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); |
| 2500 | |
| 2501 | if (di->usb.charger_connected) |
| 2502 | ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 2503 | } |
| 2504 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2505 | /** |
| 2506 | * ab8500_charger_vbusdetf_handler() - VBUS falling detected |
| 2507 | * @irq: interrupt number |
| 2508 | * @_di: pointer to the ab8500_charger structure |
| 2509 | * |
| 2510 | * Returns IRQ status(IRQ_HANDLED) |
| 2511 | */ |
| 2512 | static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) |
| 2513 | { |
| 2514 | struct ab8500_charger *di = _di; |
| 2515 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2516 | di->vbus_detected = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2517 | dev_dbg(di->dev, "VBUS falling detected\n"); |
| 2518 | queue_work(di->charger_wq, &di->detect_usb_type_work); |
| 2519 | |
| 2520 | return IRQ_HANDLED; |
| 2521 | } |
| 2522 | |
| 2523 | /** |
| 2524 | * ab8500_charger_vbusdetr_handler() - VBUS rising detected |
| 2525 | * @irq: interrupt number |
| 2526 | * @_di: pointer to the ab8500_charger structure |
| 2527 | * |
| 2528 | * Returns IRQ status(IRQ_HANDLED) |
| 2529 | */ |
| 2530 | static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) |
| 2531 | { |
| 2532 | struct ab8500_charger *di = _di; |
| 2533 | |
| 2534 | di->vbus_detected = true; |
| 2535 | dev_dbg(di->dev, "VBUS rising detected\n"); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2536 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2537 | queue_work(di->charger_wq, &di->detect_usb_type_work); |
| 2538 | |
| 2539 | return IRQ_HANDLED; |
| 2540 | } |
| 2541 | |
| 2542 | /** |
| 2543 | * ab8500_charger_usblinkstatus_handler() - USB link status has changed |
| 2544 | * @irq: interrupt number |
| 2545 | * @_di: pointer to the ab8500_charger structure |
| 2546 | * |
| 2547 | * Returns IRQ status(IRQ_HANDLED) |
| 2548 | */ |
| 2549 | static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) |
| 2550 | { |
| 2551 | struct ab8500_charger *di = _di; |
| 2552 | |
| 2553 | dev_dbg(di->dev, "USB link status changed\n"); |
| 2554 | |
| 2555 | queue_work(di->charger_wq, &di->usb_link_status_work); |
| 2556 | |
| 2557 | return IRQ_HANDLED; |
| 2558 | } |
| 2559 | |
| 2560 | /** |
| 2561 | * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger |
| 2562 | * thermal protection threshold |
| 2563 | * @irq: interrupt number |
| 2564 | * @_di: pointer to the ab8500_charger structure |
| 2565 | * |
| 2566 | * Returns IRQ status(IRQ_HANDLED) |
| 2567 | */ |
| 2568 | static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) |
| 2569 | { |
| 2570 | struct ab8500_charger *di = _di; |
| 2571 | |
| 2572 | dev_dbg(di->dev, |
| 2573 | "Die temp above USB charger thermal protection threshold\n"); |
| 2574 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); |
| 2575 | |
| 2576 | return IRQ_HANDLED; |
| 2577 | } |
| 2578 | |
| 2579 | /** |
| 2580 | * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger |
| 2581 | * thermal protection threshold |
| 2582 | * @irq: interrupt number |
| 2583 | * @_di: pointer to the ab8500_charger structure |
| 2584 | * |
| 2585 | * Returns IRQ status(IRQ_HANDLED) |
| 2586 | */ |
| 2587 | static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) |
| 2588 | { |
| 2589 | struct ab8500_charger *di = _di; |
| 2590 | |
| 2591 | dev_dbg(di->dev, |
| 2592 | "Die temp ok for USB charger thermal protection threshold\n"); |
| 2593 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); |
| 2594 | |
| 2595 | return IRQ_HANDLED; |
| 2596 | } |
| 2597 | |
| 2598 | /** |
| 2599 | * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected |
| 2600 | * @irq: interrupt number |
| 2601 | * @_di: pointer to the ab8500_charger structure |
| 2602 | * |
| 2603 | * Returns IRQ status(IRQ_HANDLED) |
| 2604 | */ |
| 2605 | static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) |
| 2606 | { |
| 2607 | struct ab8500_charger *di = _di; |
| 2608 | |
| 2609 | dev_dbg(di->dev, "Not allowed USB charger detected\n"); |
| 2610 | queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); |
| 2611 | |
| 2612 | return IRQ_HANDLED; |
| 2613 | } |
| 2614 | |
| 2615 | /** |
| 2616 | * ab8500_charger_chwdexp_handler() - Charger watchdog expired |
| 2617 | * @irq: interrupt number |
| 2618 | * @_di: pointer to the ab8500_charger structure |
| 2619 | * |
| 2620 | * Returns IRQ status(IRQ_HANDLED) |
| 2621 | */ |
| 2622 | static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) |
| 2623 | { |
| 2624 | struct ab8500_charger *di = _di; |
| 2625 | |
| 2626 | dev_dbg(di->dev, "Charger watchdog expired\n"); |
| 2627 | |
| 2628 | /* |
| 2629 | * The charger that was online when the watchdog expired |
| 2630 | * needs to be restarted for charging to start again |
| 2631 | */ |
| 2632 | if (di->ac.charger_online) { |
| 2633 | di->ac.wd_expired = true; |
| 2634 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2635 | } |
| 2636 | if (di->usb.charger_online) { |
| 2637 | di->usb.wd_expired = true; |
| 2638 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2639 | } |
| 2640 | |
| 2641 | return IRQ_HANDLED; |
| 2642 | } |
| 2643 | |
| 2644 | /** |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2645 | * ab8500_charger_vbuschdropend_handler() - VBUS drop removed |
| 2646 | * @irq: interrupt number |
| 2647 | * @_di: pointer to the ab8500_charger structure |
| 2648 | * |
| 2649 | * Returns IRQ status(IRQ_HANDLED) |
| 2650 | */ |
| 2651 | static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) |
| 2652 | { |
| 2653 | struct ab8500_charger *di = _di; |
| 2654 | |
| 2655 | dev_dbg(di->dev, "VBUS charger drop ended\n"); |
| 2656 | di->flags.vbus_drop_end = true; |
| 2657 | queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, |
| 2658 | round_jiffies(30 * HZ)); |
| 2659 | |
| 2660 | return IRQ_HANDLED; |
| 2661 | } |
| 2662 | |
| 2663 | /** |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2664 | * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected |
| 2665 | * @irq: interrupt number |
| 2666 | * @_di: pointer to the ab8500_charger structure |
| 2667 | * |
| 2668 | * Returns IRQ status(IRQ_HANDLED) |
| 2669 | */ |
| 2670 | static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) |
| 2671 | { |
| 2672 | struct ab8500_charger *di = _di; |
| 2673 | |
| 2674 | dev_dbg(di->dev, "VBUS overvoltage detected\n"); |
| 2675 | di->flags.vbus_ovv = true; |
| 2676 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2677 | |
| 2678 | /* Schedule a new HW failure check */ |
| 2679 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); |
| 2680 | |
| 2681 | return IRQ_HANDLED; |
| 2682 | } |
| 2683 | |
| 2684 | /** |
| 2685 | * ab8500_charger_ac_get_property() - get the ac/mains properties |
| 2686 | * @psy: pointer to the power_supply structure |
| 2687 | * @psp: pointer to the power_supply_property structure |
| 2688 | * @val: pointer to the power_supply_propval union |
| 2689 | * |
| 2690 | * This function gets called when an application tries to get the ac/mains |
| 2691 | * properties by reading the sysfs files. |
| 2692 | * AC/Mains properties are online, present and voltage. |
| 2693 | * online: ac/mains charging is in progress or not |
| 2694 | * present: presence of the ac/mains |
| 2695 | * voltage: AC/Mains voltage |
| 2696 | * Returns error code in case of failure else 0(on success) |
| 2697 | */ |
| 2698 | static int ab8500_charger_ac_get_property(struct power_supply *psy, |
| 2699 | enum power_supply_property psp, |
| 2700 | union power_supply_propval *val) |
| 2701 | { |
| 2702 | struct ab8500_charger *di; |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2703 | int ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2704 | |
| 2705 | di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); |
| 2706 | |
| 2707 | switch (psp) { |
| 2708 | case POWER_SUPPLY_PROP_HEALTH: |
| 2709 | if (di->flags.mainextchnotok) |
| 2710 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 2711 | else if (di->ac.wd_expired || di->usb.wd_expired) |
| 2712 | val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| 2713 | else if (di->flags.main_thermal_prot) |
| 2714 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 2715 | else |
| 2716 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 2717 | break; |
| 2718 | case POWER_SUPPLY_PROP_ONLINE: |
| 2719 | val->intval = di->ac.charger_online; |
| 2720 | break; |
| 2721 | case POWER_SUPPLY_PROP_PRESENT: |
| 2722 | val->intval = di->ac.charger_connected; |
| 2723 | break; |
| 2724 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2725 | ret = ab8500_charger_get_ac_voltage(di); |
| 2726 | if (ret >= 0) |
| 2727 | di->ac.charger_voltage = ret; |
| 2728 | /* On error, use previous value */ |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2729 | val->intval = di->ac.charger_voltage * 1000; |
| 2730 | break; |
| 2731 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| 2732 | /* |
| 2733 | * This property is used to indicate when CV mode is entered |
| 2734 | * for the AC charger |
| 2735 | */ |
| 2736 | di->ac.cv_active = ab8500_charger_ac_cv(di); |
| 2737 | val->intval = di->ac.cv_active; |
| 2738 | break; |
| 2739 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2740 | ret = ab8500_charger_get_ac_current(di); |
| 2741 | if (ret >= 0) |
| 2742 | di->ac.charger_current = ret; |
| 2743 | val->intval = di->ac.charger_current * 1000; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2744 | break; |
| 2745 | default: |
| 2746 | return -EINVAL; |
| 2747 | } |
| 2748 | return 0; |
| 2749 | } |
| 2750 | |
| 2751 | /** |
| 2752 | * ab8500_charger_usb_get_property() - get the usb properties |
| 2753 | * @psy: pointer to the power_supply structure |
| 2754 | * @psp: pointer to the power_supply_property structure |
| 2755 | * @val: pointer to the power_supply_propval union |
| 2756 | * |
| 2757 | * This function gets called when an application tries to get the usb |
| 2758 | * properties by reading the sysfs files. |
| 2759 | * USB properties are online, present and voltage. |
| 2760 | * online: usb charging is in progress or not |
| 2761 | * present: presence of the usb |
| 2762 | * voltage: vbus voltage |
| 2763 | * Returns error code in case of failure else 0(on success) |
| 2764 | */ |
| 2765 | static int ab8500_charger_usb_get_property(struct power_supply *psy, |
| 2766 | enum power_supply_property psp, |
| 2767 | union power_supply_propval *val) |
| 2768 | { |
| 2769 | struct ab8500_charger *di; |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2770 | int ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2771 | |
| 2772 | di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); |
| 2773 | |
| 2774 | switch (psp) { |
| 2775 | case POWER_SUPPLY_PROP_HEALTH: |
| 2776 | if (di->flags.usbchargernotok) |
| 2777 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 2778 | else if (di->ac.wd_expired || di->usb.wd_expired) |
| 2779 | val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| 2780 | else if (di->flags.usb_thermal_prot) |
| 2781 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 2782 | else if (di->flags.vbus_ovv) |
| 2783 | val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 2784 | else |
| 2785 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 2786 | break; |
| 2787 | case POWER_SUPPLY_PROP_ONLINE: |
| 2788 | val->intval = di->usb.charger_online; |
| 2789 | break; |
| 2790 | case POWER_SUPPLY_PROP_PRESENT: |
| 2791 | val->intval = di->usb.charger_connected; |
| 2792 | break; |
| 2793 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2794 | ret = ab8500_charger_get_vbus_voltage(di); |
| 2795 | if (ret >= 0) |
| 2796 | di->usb.charger_voltage = ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2797 | val->intval = di->usb.charger_voltage * 1000; |
| 2798 | break; |
| 2799 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| 2800 | /* |
| 2801 | * This property is used to indicate when CV mode is entered |
| 2802 | * for the USB charger |
| 2803 | */ |
| 2804 | di->usb.cv_active = ab8500_charger_usb_cv(di); |
| 2805 | val->intval = di->usb.cv_active; |
| 2806 | break; |
| 2807 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
Jonas Aaberg | a864c5a | 2013-01-11 13:12:53 +0000 | [diff] [blame] | 2808 | ret = ab8500_charger_get_usb_current(di); |
| 2809 | if (ret >= 0) |
| 2810 | di->usb.charger_current = ret; |
| 2811 | val->intval = di->usb.charger_current * 1000; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2812 | break; |
| 2813 | case POWER_SUPPLY_PROP_CURRENT_AVG: |
| 2814 | /* |
| 2815 | * This property is used to indicate when VBUS has collapsed |
| 2816 | * due to too high output current from the USB charger |
| 2817 | */ |
| 2818 | if (di->flags.vbus_collapse) |
| 2819 | val->intval = 1; |
| 2820 | else |
| 2821 | val->intval = 0; |
| 2822 | break; |
| 2823 | default: |
| 2824 | return -EINVAL; |
| 2825 | } |
| 2826 | return 0; |
| 2827 | } |
| 2828 | |
| 2829 | /** |
| 2830 | * ab8500_charger_init_hw_registers() - Set up charger related registers |
| 2831 | * @di: pointer to the ab8500_charger structure |
| 2832 | * |
| 2833 | * Set up charger OVV, watchdog and maximum voltage registers as well as |
| 2834 | * charging of the backup battery |
| 2835 | */ |
| 2836 | static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) |
| 2837 | { |
| 2838 | int ret = 0; |
| 2839 | |
| 2840 | /* Setup maximum charger current and voltage for ABB cut2.0 */ |
| 2841 | if (!is_ab8500_1p1_or_earlier(di->parent)) { |
| 2842 | ret = abx500_set_register_interruptible(di->dev, |
| 2843 | AB8500_CHARGER, |
| 2844 | AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); |
| 2845 | if (ret) { |
| 2846 | dev_err(di->dev, |
| 2847 | "failed to set CH_VOLT_LVL_MAX_REG\n"); |
| 2848 | goto out; |
| 2849 | } |
| 2850 | |
| 2851 | ret = abx500_set_register_interruptible(di->dev, |
| 2852 | AB8500_CHARGER, |
| 2853 | AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); |
| 2854 | if (ret) { |
| 2855 | dev_err(di->dev, |
| 2856 | "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); |
| 2857 | goto out; |
| 2858 | } |
| 2859 | } |
| 2860 | |
Jonas Aaberg | 0ed5107 | 2012-05-11 12:42:25 +0200 | [diff] [blame] | 2861 | if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent)) |
| 2862 | ret = abx500_mask_and_set_register_interruptible(di->dev, |
| 2863 | AB8500_CHARGER, |
| 2864 | AB8500_USBCH_CTRL2_REG, |
| 2865 | VBUS_AUTO_IN_CURR_LIM_ENA, |
| 2866 | VBUS_AUTO_IN_CURR_LIM_ENA); |
| 2867 | else |
| 2868 | /* |
| 2869 | * VBUS OVV set to 6.3V and enable automatic current limitation |
| 2870 | */ |
| 2871 | ret = abx500_set_register_interruptible(di->dev, |
| 2872 | AB8500_CHARGER, |
| 2873 | AB8500_USBCH_CTRL2_REG, |
| 2874 | VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2875 | if (ret) { |
Jonas Aaberg | 0ed5107 | 2012-05-11 12:42:25 +0200 | [diff] [blame] | 2876 | dev_err(di->dev, |
| 2877 | "failed to set automatic current limitation\n"); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2878 | goto out; |
| 2879 | } |
| 2880 | |
| 2881 | /* Enable main watchdog in OTP */ |
| 2882 | ret = abx500_set_register_interruptible(di->dev, |
| 2883 | AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); |
| 2884 | if (ret) { |
| 2885 | dev_err(di->dev, "failed to enable main WD in OTP\n"); |
| 2886 | goto out; |
| 2887 | } |
| 2888 | |
| 2889 | /* Enable main watchdog */ |
| 2890 | ret = abx500_set_register_interruptible(di->dev, |
| 2891 | AB8500_SYS_CTRL2_BLOCK, |
| 2892 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); |
| 2893 | if (ret) { |
| 2894 | dev_err(di->dev, "faile to enable main watchdog\n"); |
| 2895 | goto out; |
| 2896 | } |
| 2897 | |
| 2898 | /* |
| 2899 | * Due to internal synchronisation, Enable and Kick watchdog bits |
| 2900 | * cannot be enabled in a single write. |
| 2901 | * A minimum delay of 2*32 kHz period (62.5µs) must be inserted |
| 2902 | * between writing Enable then Kick bits. |
| 2903 | */ |
| 2904 | udelay(63); |
| 2905 | |
| 2906 | /* Kick main watchdog */ |
| 2907 | ret = abx500_set_register_interruptible(di->dev, |
| 2908 | AB8500_SYS_CTRL2_BLOCK, |
| 2909 | AB8500_MAIN_WDOG_CTRL_REG, |
| 2910 | (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); |
| 2911 | if (ret) { |
| 2912 | dev_err(di->dev, "failed to kick main watchdog\n"); |
| 2913 | goto out; |
| 2914 | } |
| 2915 | |
| 2916 | /* Disable main watchdog */ |
| 2917 | ret = abx500_set_register_interruptible(di->dev, |
| 2918 | AB8500_SYS_CTRL2_BLOCK, |
| 2919 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); |
| 2920 | if (ret) { |
| 2921 | dev_err(di->dev, "failed to disable main watchdog\n"); |
| 2922 | goto out; |
| 2923 | } |
| 2924 | |
| 2925 | /* Set watchdog timeout */ |
| 2926 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 2927 | AB8500_CH_WD_TIMER_REG, WD_TIMER); |
| 2928 | if (ret) { |
| 2929 | dev_err(di->dev, "failed to set charger watchdog timeout\n"); |
| 2930 | goto out; |
| 2931 | } |
| 2932 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2933 | /* Set charger watchdog timeout */ |
| 2934 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 2935 | AB8500_CH_WD_TIMER_REG, WD_TIMER); |
| 2936 | if (ret) { |
| 2937 | dev_err(di->dev, "failed to set charger watchdog timeout\n"); |
| 2938 | goto out; |
| 2939 | } |
| 2940 | |
| 2941 | ret = ab8500_charger_led_en(di, false); |
| 2942 | if (ret < 0) { |
| 2943 | dev_err(di->dev, "failed to disable LED\n"); |
| 2944 | goto out; |
| 2945 | } |
| 2946 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2947 | /* Backup battery voltage and current */ |
| 2948 | ret = abx500_set_register_interruptible(di->dev, |
| 2949 | AB8500_RTC, |
| 2950 | AB8500_RTC_BACKUP_CHG_REG, |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 2951 | di->bm->bkup_bat_v | |
| 2952 | di->bm->bkup_bat_i); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2953 | if (ret) { |
| 2954 | dev_err(di->dev, "failed to setup backup battery charging\n"); |
| 2955 | goto out; |
| 2956 | } |
| 2957 | |
| 2958 | /* Enable backup battery charging */ |
| 2959 | abx500_mask_and_set_register_interruptible(di->dev, |
| 2960 | AB8500_RTC, AB8500_RTC_CTRL_REG, |
| 2961 | RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); |
| 2962 | if (ret < 0) |
| 2963 | dev_err(di->dev, "%s mask and set failed\n", __func__); |
| 2964 | |
| 2965 | out: |
| 2966 | return ret; |
| 2967 | } |
| 2968 | |
| 2969 | /* |
| 2970 | * ab8500 charger driver interrupts and their respective isr |
| 2971 | */ |
| 2972 | static struct ab8500_charger_interrupts ab8500_charger_irq[] = { |
| 2973 | {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, |
| 2974 | {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, |
| 2975 | {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, |
| 2976 | {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, |
| 2977 | {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, |
| 2978 | {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, |
| 2979 | {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, |
| 2980 | {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, |
| 2981 | {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, |
| 2982 | {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, |
| 2983 | {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, |
| 2984 | {"VBUS_OVV", ab8500_charger_vbusovv_handler}, |
| 2985 | {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 2986 | {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2987 | }; |
| 2988 | |
| 2989 | static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, |
| 2990 | unsigned long event, void *power) |
| 2991 | { |
| 2992 | struct ab8500_charger *di = |
| 2993 | container_of(nb, struct ab8500_charger, nb); |
| 2994 | enum ab8500_usb_state bm_usb_state; |
| 2995 | unsigned mA = *((unsigned *)power); |
| 2996 | |
Lee Jones | c9ade0f | 2013-01-21 11:22:56 +0000 | [diff] [blame] | 2997 | if (!di) |
| 2998 | return NOTIFY_DONE; |
| 2999 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3000 | if (event != USB_EVENT_VBUS) { |
| 3001 | dev_dbg(di->dev, "not a standard host, returning\n"); |
| 3002 | return NOTIFY_DONE; |
| 3003 | } |
| 3004 | |
| 3005 | /* TODO: State is fabricate here. See if charger really needs USB |
| 3006 | * state or if mA is enough |
| 3007 | */ |
| 3008 | if ((di->usb_state.usb_current == 2) && (mA > 2)) |
| 3009 | bm_usb_state = AB8500_BM_USB_STATE_RESUME; |
| 3010 | else if (mA == 0) |
| 3011 | bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; |
| 3012 | else if (mA == 2) |
| 3013 | bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; |
| 3014 | else if (mA >= 8) /* 8, 100, 500 */ |
| 3015 | bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; |
| 3016 | else /* Should never occur */ |
| 3017 | bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; |
| 3018 | |
| 3019 | dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", |
| 3020 | __func__, bm_usb_state, mA); |
| 3021 | |
| 3022 | spin_lock(&di->usb_state.usb_lock); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3023 | di->usb_state.state_tmp = bm_usb_state; |
| 3024 | di->usb_state.usb_current_tmp = mA; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3025 | spin_unlock(&di->usb_state.usb_lock); |
| 3026 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3027 | /* |
| 3028 | * wait for some time until you get updates from the usb stack |
| 3029 | * and negotiations are completed |
| 3030 | */ |
| 3031 | queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3032 | |
| 3033 | return NOTIFY_OK; |
| 3034 | } |
| 3035 | |
| 3036 | #if defined(CONFIG_PM) |
| 3037 | static int ab8500_charger_resume(struct platform_device *pdev) |
| 3038 | { |
| 3039 | int ret; |
| 3040 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 3041 | |
| 3042 | /* |
| 3043 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 3044 | * logic. That means we have to continously kick the charger |
| 3045 | * watchdog even when no charger is connected. This is only |
| 3046 | * valid once the AC charger has been enabled. This is |
| 3047 | * a bug that is not handled by the algorithm and the |
| 3048 | * watchdog have to be kicked by the charger driver |
| 3049 | * when the AC charger is disabled |
| 3050 | */ |
| 3051 | if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { |
| 3052 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 3053 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 3054 | if (ret) |
| 3055 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 3056 | |
| 3057 | /* If not already pending start a new timer */ |
| 3058 | if (!delayed_work_pending( |
| 3059 | &di->kick_wd_work)) { |
| 3060 | queue_delayed_work(di->charger_wq, &di->kick_wd_work, |
| 3061 | round_jiffies(WD_KICK_INTERVAL)); |
| 3062 | } |
| 3063 | } |
| 3064 | |
| 3065 | /* If we still have a HW failure, schedule a new check */ |
| 3066 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { |
| 3067 | queue_delayed_work(di->charger_wq, |
| 3068 | &di->check_hw_failure_work, 0); |
| 3069 | } |
| 3070 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3071 | if (di->flags.vbus_drop_end) |
| 3072 | queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); |
| 3073 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3074 | return 0; |
| 3075 | } |
| 3076 | |
| 3077 | static int ab8500_charger_suspend(struct platform_device *pdev, |
| 3078 | pm_message_t state) |
| 3079 | { |
| 3080 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 3081 | |
| 3082 | /* Cancel any pending HW failure check */ |
| 3083 | if (delayed_work_pending(&di->check_hw_failure_work)) |
| 3084 | cancel_delayed_work(&di->check_hw_failure_work); |
| 3085 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3086 | if (delayed_work_pending(&di->vbus_drop_end_work)) |
| 3087 | cancel_delayed_work(&di->vbus_drop_end_work); |
| 3088 | |
Jonas Aaberg | 53ef1f5 | 2012-05-21 16:05:01 +0200 | [diff] [blame] | 3089 | flush_delayed_work(&di->attach_work); |
| 3090 | flush_delayed_work(&di->usb_charger_attached_work); |
| 3091 | flush_delayed_work(&di->ac_charger_attached_work); |
| 3092 | flush_delayed_work(&di->check_usbchgnotok_work); |
| 3093 | flush_delayed_work(&di->check_vbat_work); |
| 3094 | flush_delayed_work(&di->kick_wd_work); |
| 3095 | |
| 3096 | flush_work(&di->usb_link_status_work); |
| 3097 | flush_work(&di->ac_work); |
| 3098 | flush_work(&di->detect_usb_type_work); |
| 3099 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3100 | if (atomic_read(&di->current_stepping_sessions)) |
| 3101 | return -EAGAIN; |
| 3102 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3103 | return 0; |
| 3104 | } |
| 3105 | #else |
| 3106 | #define ab8500_charger_suspend NULL |
| 3107 | #define ab8500_charger_resume NULL |
| 3108 | #endif |
| 3109 | |
Bill Pemberton | 415ec69 | 2012-11-19 13:26:07 -0500 | [diff] [blame] | 3110 | static int ab8500_charger_remove(struct platform_device *pdev) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3111 | { |
| 3112 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 3113 | int i, irq, ret; |
| 3114 | |
| 3115 | /* Disable AC charging */ |
| 3116 | ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); |
| 3117 | |
| 3118 | /* Disable USB charging */ |
| 3119 | ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); |
| 3120 | |
| 3121 | /* Disable interrupts */ |
| 3122 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { |
| 3123 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 3124 | free_irq(irq, di); |
| 3125 | } |
| 3126 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3127 | /* Backup battery voltage and current disable */ |
| 3128 | ret = abx500_mask_and_set_register_interruptible(di->dev, |
| 3129 | AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); |
| 3130 | if (ret < 0) |
| 3131 | dev_err(di->dev, "%s mask and set failed\n", __func__); |
| 3132 | |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3133 | usb_unregister_notifier(di->usb_phy, &di->nb); |
Kishon Vijay Abraham I | 721002e | 2012-06-22 17:02:45 +0530 | [diff] [blame] | 3134 | usb_put_phy(di->usb_phy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3135 | |
| 3136 | /* Delete the work queue */ |
| 3137 | destroy_workqueue(di->charger_wq); |
| 3138 | |
| 3139 | flush_scheduled_work(); |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3140 | if(di->usb_chg.enabled) |
| 3141 | power_supply_unregister(&di->usb_chg.psy); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3142 | #if !defined(CONFIG_CHARGER_PM2301) |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3143 | if(di->ac_chg.enabled) |
| 3144 | power_supply_unregister(&di->ac_chg.psy); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3145 | #endif |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3146 | platform_set_drvdata(pdev, NULL); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3147 | |
| 3148 | return 0; |
| 3149 | } |
| 3150 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3151 | static char *supply_interface[] = { |
| 3152 | "ab8500_chargalg", |
| 3153 | "ab8500_fg", |
| 3154 | "ab8500_btemp", |
| 3155 | }; |
| 3156 | |
Bill Pemberton | c8afa64 | 2012-11-19 13:22:23 -0500 | [diff] [blame] | 3157 | static int ab8500_charger_probe(struct platform_device *pdev) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3158 | { |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3159 | struct device_node *np = pdev->dev.of_node; |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame] | 3160 | struct abx500_bm_data *plat = pdev->dev.platform_data; |
Lee Jones | 2aac3de | 2012-05-05 04:38:19 -0700 | [diff] [blame] | 3161 | struct ab8500_charger *di; |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 3162 | int irq, i, charger_status, ret = 0, ch_stat; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3163 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3164 | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
| 3165 | if (!di) { |
| 3166 | dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3167 | return -ENOMEM; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3168 | } |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame] | 3169 | |
| 3170 | if (!plat) { |
| 3171 | dev_err(&pdev->dev, "no battery management data supplied\n"); |
| 3172 | return -EINVAL; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3173 | } |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame] | 3174 | di->bm = plat; |
| 3175 | |
| 3176 | if (np) { |
| 3177 | ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); |
| 3178 | if (ret) { |
| 3179 | dev_err(&pdev->dev, "failed to get battery information\n"); |
| 3180 | return ret; |
| 3181 | } |
| 3182 | di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); |
| 3183 | } else |
| 3184 | di->autopower_cfg = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3185 | |
| 3186 | /* get parent data */ |
| 3187 | di->dev = &pdev->dev; |
| 3188 | di->parent = dev_get_drvdata(pdev->dev.parent); |
| 3189 | di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| 3190 | |
| 3191 | /* initialize lock */ |
| 3192 | spin_lock_init(&di->usb_state.usb_lock); |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3193 | mutex_init(&di->usb_ipt_crnt_lock); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3194 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3195 | di->autopower = false; |
Henrik Sölver | ff38090 | 2012-04-17 15:51:01 +0200 | [diff] [blame] | 3196 | di->invalid_charger_detect_state = 0; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3197 | |
| 3198 | /* AC supply */ |
| 3199 | /* power_supply base class */ |
| 3200 | di->ac_chg.psy.name = "ab8500_ac"; |
| 3201 | di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; |
| 3202 | di->ac_chg.psy.properties = ab8500_charger_ac_props; |
| 3203 | di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); |
| 3204 | di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3205 | di->ac_chg.psy.supplied_to = supply_interface; |
| 3206 | di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3207 | /* ux500_charger sub-class */ |
| 3208 | di->ac_chg.ops.enable = &ab8500_charger_ac_en; |
| 3209 | di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
| 3210 | di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; |
| 3211 | di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ |
| 3212 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; |
| 3213 | di->ac_chg.max_out_curr = ab8500_charger_current_map[ |
| 3214 | ARRAY_SIZE(ab8500_charger_current_map) - 1]; |
Loic Pallardy | e07a564 | 2012-05-10 15:33:56 +0200 | [diff] [blame] | 3215 | di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; |
Lee Jones | 97034a1 | 2013-01-17 16:08:42 +0000 | [diff] [blame] | 3216 | di->ac_chg.enabled = di->bm->ac_enabled; |
Loic Pallardy | e07a564 | 2012-05-10 15:33:56 +0200 | [diff] [blame] | 3217 | di->ac_chg.external = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3218 | |
| 3219 | /* USB supply */ |
| 3220 | /* power_supply base class */ |
| 3221 | di->usb_chg.psy.name = "ab8500_usb"; |
| 3222 | di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; |
| 3223 | di->usb_chg.psy.properties = ab8500_charger_usb_props; |
| 3224 | di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); |
| 3225 | di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3226 | di->usb_chg.psy.supplied_to = supply_interface; |
| 3227 | di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3228 | /* ux500_charger sub-class */ |
| 3229 | di->usb_chg.ops.enable = &ab8500_charger_usb_en; |
| 3230 | di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
| 3231 | di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; |
| 3232 | di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ |
| 3233 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; |
| 3234 | di->usb_chg.max_out_curr = ab8500_charger_current_map[ |
| 3235 | ARRAY_SIZE(ab8500_charger_current_map) - 1]; |
Loic Pallardy | e07a564 | 2012-05-10 15:33:56 +0200 | [diff] [blame] | 3236 | di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; |
Lee Jones | 97034a1 | 2013-01-17 16:08:42 +0000 | [diff] [blame] | 3237 | di->usb_chg.enabled = di->bm->usb_enabled; |
Loic Pallardy | e07a564 | 2012-05-10 15:33:56 +0200 | [diff] [blame] | 3238 | di->usb_chg.external = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3239 | |
| 3240 | /* Create a work queue for the charger */ |
| 3241 | di->charger_wq = |
| 3242 | create_singlethread_workqueue("ab8500_charger_wq"); |
| 3243 | if (di->charger_wq == NULL) { |
| 3244 | dev_err(di->dev, "failed to create work queue\n"); |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3245 | return -ENOMEM; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3246 | } |
| 3247 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 3248 | mutex_init(&di->charger_attached_mutex); |
| 3249 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3250 | /* Init work for HW failure check */ |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 3251 | INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3252 | ab8500_charger_check_hw_failure_work); |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 3253 | INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3254 | ab8500_charger_check_usbchargernotok_work); |
| 3255 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 3256 | INIT_DELAYED_WORK(&di->ac_charger_attached_work, |
| 3257 | ab8500_charger_ac_attached_work); |
| 3258 | INIT_DELAYED_WORK(&di->usb_charger_attached_work, |
| 3259 | ab8500_charger_usb_attached_work); |
| 3260 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3261 | /* |
| 3262 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 3263 | * logic. That means we have to continously kick the charger |
| 3264 | * watchdog even when no charger is connected. This is only |
| 3265 | * valid once the AC charger has been enabled. This is |
| 3266 | * a bug that is not handled by the algorithm and the |
| 3267 | * watchdog have to be kicked by the charger driver |
| 3268 | * when the AC charger is disabled |
| 3269 | */ |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 3270 | INIT_DEFERRABLE_WORK(&di->kick_wd_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3271 | ab8500_charger_kick_watchdog_work); |
| 3272 | |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 3273 | INIT_DEFERRABLE_WORK(&di->check_vbat_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3274 | ab8500_charger_check_vbat_work); |
| 3275 | |
Marcus Cooper | 4b45f4a | 2013-01-11 13:13:04 +0000 | [diff] [blame] | 3276 | INIT_DELAYED_WORK(&di->attach_work, |
| 3277 | ab8500_charger_usb_link_attach_work); |
| 3278 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3279 | INIT_DELAYED_WORK(&di->usb_state_changed_work, |
| 3280 | ab8500_charger_usb_state_changed_work); |
| 3281 | |
| 3282 | INIT_DELAYED_WORK(&di->vbus_drop_end_work, |
| 3283 | ab8500_charger_vbus_drop_end_work); |
| 3284 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3285 | /* Init work for charger detection */ |
| 3286 | INIT_WORK(&di->usb_link_status_work, |
| 3287 | ab8500_charger_usb_link_status_work); |
| 3288 | INIT_WORK(&di->ac_work, ab8500_charger_ac_work); |
| 3289 | INIT_WORK(&di->detect_usb_type_work, |
| 3290 | ab8500_charger_detect_usb_type_work); |
| 3291 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3292 | /* Init work for checking HW status */ |
| 3293 | INIT_WORK(&di->check_main_thermal_prot_work, |
| 3294 | ab8500_charger_check_main_thermal_prot_work); |
| 3295 | INIT_WORK(&di->check_usb_thermal_prot_work, |
| 3296 | ab8500_charger_check_usb_thermal_prot_work); |
| 3297 | |
| 3298 | /* |
| 3299 | * VDD ADC supply needs to be enabled from this driver when there |
| 3300 | * is a charger connected to avoid erroneous BTEMP_HIGH/LOW |
| 3301 | * interrupts during charging |
| 3302 | */ |
Sachin Kamat | 8feffd1 | 2012-12-07 17:23:28 +0530 | [diff] [blame] | 3303 | di->regu = devm_regulator_get(di->dev, "vddadc"); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3304 | if (IS_ERR(di->regu)) { |
| 3305 | ret = PTR_ERR(di->regu); |
| 3306 | dev_err(di->dev, "failed to get vddadc regulator\n"); |
| 3307 | goto free_charger_wq; |
| 3308 | } |
| 3309 | |
| 3310 | |
| 3311 | /* Initialize OVV, and other registers */ |
| 3312 | ret = ab8500_charger_init_hw_registers(di); |
| 3313 | if (ret) { |
| 3314 | dev_err(di->dev, "failed to initialize ABB registers\n"); |
Sachin Kamat | 8feffd1 | 2012-12-07 17:23:28 +0530 | [diff] [blame] | 3315 | goto free_charger_wq; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3316 | } |
| 3317 | |
| 3318 | /* Register AC charger class */ |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3319 | if(di->ac_chg.enabled) { |
| 3320 | ret = power_supply_register(di->dev, &di->ac_chg.psy); |
| 3321 | if (ret) { |
| 3322 | dev_err(di->dev, "failed to register AC charger\n"); |
| 3323 | goto free_charger_wq; |
| 3324 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3325 | } |
| 3326 | |
| 3327 | /* Register USB charger class */ |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3328 | if(di->usb_chg.enabled) { |
| 3329 | ret = power_supply_register(di->dev, &di->usb_chg.psy); |
| 3330 | if (ret) { |
| 3331 | dev_err(di->dev, "failed to register USB charger\n"); |
| 3332 | goto free_ac; |
| 3333 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3334 | } |
| 3335 | |
Kishon Vijay Abraham I | 662dca5 | 2012-06-22 17:02:46 +0530 | [diff] [blame] | 3336 | di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); |
Kishon Vijay Abraham I | ded017e | 2012-06-26 17:40:32 +0530 | [diff] [blame] | 3337 | if (IS_ERR_OR_NULL(di->usb_phy)) { |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3338 | dev_err(di->dev, "failed to get usb transceiver\n"); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3339 | ret = -EINVAL; |
| 3340 | goto free_usb; |
| 3341 | } |
| 3342 | di->nb.notifier_call = ab8500_charger_usb_notifier_call; |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3343 | ret = usb_register_notifier(di->usb_phy, &di->nb); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3344 | if (ret) { |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3345 | dev_err(di->dev, "failed to register usb notifier\n"); |
| 3346 | goto put_usb_phy; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3347 | } |
| 3348 | |
| 3349 | /* Identify the connected charger types during startup */ |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3350 | charger_status = ab8500_charger_detect_chargers(di, true); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3351 | if (charger_status & AC_PW_CONN) { |
| 3352 | di->ac.charger_connected = 1; |
| 3353 | di->ac_conn = true; |
| 3354 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 3355 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); |
| 3356 | } |
| 3357 | |
| 3358 | if (charger_status & USB_PW_CONN) { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3359 | di->vbus_detected = true; |
| 3360 | di->vbus_detected_start = true; |
| 3361 | queue_work(di->charger_wq, |
| 3362 | &di->detect_usb_type_work); |
| 3363 | } |
| 3364 | |
| 3365 | /* Register interrupts */ |
| 3366 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { |
| 3367 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 3368 | ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, |
| 3369 | IRQF_SHARED | IRQF_NO_SUSPEND, |
| 3370 | ab8500_charger_irq[i].name, di); |
| 3371 | |
| 3372 | if (ret != 0) { |
| 3373 | dev_err(di->dev, "failed to request %s IRQ %d: %d\n" |
| 3374 | , ab8500_charger_irq[i].name, irq, ret); |
| 3375 | goto free_irq; |
| 3376 | } |
| 3377 | dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", |
| 3378 | ab8500_charger_irq[i].name, irq, ret); |
| 3379 | } |
| 3380 | |
| 3381 | platform_set_drvdata(pdev, di); |
| 3382 | |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 3383 | mutex_lock(&di->charger_attached_mutex); |
| 3384 | |
Paer-Olof Haakansson | 34c11a7 | 2012-02-22 19:07:51 +0100 | [diff] [blame^] | 3385 | ch_stat = ab8500_charger_detect_chargers(di, false); |
Lee Jones | b269fff | 2013-01-11 13:12:51 +0000 | [diff] [blame] | 3386 | |
| 3387 | if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { |
| 3388 | queue_delayed_work(di->charger_wq, |
| 3389 | &di->ac_charger_attached_work, |
| 3390 | HZ); |
| 3391 | } |
| 3392 | if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { |
| 3393 | queue_delayed_work(di->charger_wq, |
| 3394 | &di->usb_charger_attached_work, |
| 3395 | HZ); |
| 3396 | } |
| 3397 | |
| 3398 | mutex_unlock(&di->charger_attached_mutex); |
| 3399 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3400 | return ret; |
| 3401 | |
| 3402 | free_irq: |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3403 | usb_unregister_notifier(di->usb_phy, &di->nb); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3404 | |
| 3405 | /* We also have to free all successfully registered irqs */ |
| 3406 | for (i = i - 1; i >= 0; i--) { |
| 3407 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 3408 | free_irq(irq, di); |
| 3409 | } |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 3410 | put_usb_phy: |
Kishon Vijay Abraham I | 721002e | 2012-06-22 17:02:45 +0530 | [diff] [blame] | 3411 | usb_put_phy(di->usb_phy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3412 | free_usb: |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3413 | if(di->usb_chg.enabled) |
| 3414 | power_supply_unregister(&di->usb_chg.psy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3415 | free_ac: |
Michel JAOUEN | 01ec8c5 | 2012-04-26 10:00:04 +0200 | [diff] [blame] | 3416 | if(di->ac_chg.enabled) |
| 3417 | power_supply_unregister(&di->ac_chg.psy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3418 | free_charger_wq: |
| 3419 | destroy_workqueue(di->charger_wq); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3420 | return ret; |
| 3421 | } |
| 3422 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3423 | static const struct of_device_id ab8500_charger_match[] = { |
| 3424 | { .compatible = "stericsson,ab8500-charger", }, |
| 3425 | { }, |
| 3426 | }; |
| 3427 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3428 | static struct platform_driver ab8500_charger_driver = { |
| 3429 | .probe = ab8500_charger_probe, |
Bill Pemberton | 28ea73f | 2012-11-19 13:20:40 -0500 | [diff] [blame] | 3430 | .remove = ab8500_charger_remove, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3431 | .suspend = ab8500_charger_suspend, |
| 3432 | .resume = ab8500_charger_resume, |
| 3433 | .driver = { |
| 3434 | .name = "ab8500-charger", |
| 3435 | .owner = THIS_MODULE, |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 3436 | .of_match_table = ab8500_charger_match, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 3437 | }, |
| 3438 | }; |
| 3439 | |
| 3440 | static int __init ab8500_charger_init(void) |
| 3441 | { |
| 3442 | return platform_driver_register(&ab8500_charger_driver); |
| 3443 | } |
| 3444 | |
| 3445 | static void __exit ab8500_charger_exit(void) |
| 3446 | { |
| 3447 | platform_driver_unregister(&ab8500_charger_driver); |
| 3448 | } |
| 3449 | |
| 3450 | subsys_initcall_sync(ab8500_charger_init); |
| 3451 | module_exit(ab8500_charger_exit); |
| 3452 | |
| 3453 | MODULE_LICENSE("GPL v2"); |
| 3454 | MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); |
| 3455 | MODULE_ALIAS("platform:ab8500-charger"); |
| 3456 | MODULE_DESCRIPTION("AB8500 charger management driver"); |