kernel/sys.c

/*
 *  linux/kernel/sys.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

#include <linux/export.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/reboot.h>
#include <linux/prctl.h>
#include <linux/highuid.h>
#include <linux/fs.h>
#include <linux/kmod.h>
#include <linux/perf_event.h>
#include <linux/resource.h>
#include <linux/kernel.h>
#include <linux/kexec.h>
#include <linux/workqueue.h>
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/key.h>
#include <linux/times.h>
#include <linux/posix-timers.h>
#include <linux/security.h>
#include <linux/dcookies.h>
#include <linux/suspend.h>
#include <linux/tty.h>
#include <linux/signal.h>
#include <linux/cn_proc.h>
#include <linux/getcpu.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/seccomp.h>
#include <linux/cpu.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/fs_struct.h>
#include <linux/gfp.h>
#include <linux/syscore_ops.h>
#include <linux/version.h>
#include <linux/ctype.h>

#include <linux/compat.h>
#include <linux/syscalls.h>
#include <linux/kprobes.h>
#include <linux/user_namespace.h>

#include <linux/kmsg_dump.h>
/* Move somewhere else to avoid recompiling? */
#include <generated/utsrelease.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/unistd.h>

#ifndef SET_UNALIGN_CTL
# define SET_UNALIGN_CTL(a,b)	(-EINVAL)
#endif
#ifndef GET_UNALIGN_CTL
# define GET_UNALIGN_CTL(a,b)	(-EINVAL)
#endif
#ifndef SET_FPEMU_CTL
# define SET_FPEMU_CTL(a,b)	(-EINVAL)
#endif
#ifndef GET_FPEMU_CTL
# define GET_FPEMU_CTL(a,b)	(-EINVAL)
#endif
#ifndef SET_FPEXC_CTL
# define SET_FPEXC_CTL(a,b)	(-EINVAL)
#endif
#ifndef GET_FPEXC_CTL
# define GET_FPEXC_CTL(a,b)	(-EINVAL)
#endif
#ifndef GET_ENDIAN
# define GET_ENDIAN(a,b)	(-EINVAL)
#endif
#ifndef SET_ENDIAN
# define SET_ENDIAN(a,b)	(-EINVAL)
#endif
#ifndef GET_TSC_CTL
# define GET_TSC_CTL(a)		(-EINVAL)
#endif
#ifndef SET_TSC_CTL
# define SET_TSC_CTL(a)		(-EINVAL)
#endif

/*
 * this is where the system-wide overflow UID and GID are defined, for
 * architectures that now have 32-bit UID/GID but didn't in the past
 */

int overflowuid = DEFAULT_OVERFLOWUID;
int overflowgid = DEFAULT_OVERFLOWGID;

#ifdef CONFIG_UID16
EXPORT_SYMBOL(overflowuid);
EXPORT_SYMBOL(overflowgid);
#endif

/*
 * the same as above, but for filesystems which can only store a 16-bit
 * UID and GID. as such, this is needed on all architectures
 */

int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;

EXPORT_SYMBOL(fs_overflowuid);
EXPORT_SYMBOL(fs_overflowgid);

/*
 * this indicates whether you can reboot with ctrl-alt-del: the default is yes
 */

int C_A_D = 1;
struct pid *cad_pid;
EXPORT_SYMBOL(cad_pid);

/*
 * If set, this is used for preparing the system to power off.
 */

void (*pm_power_off_prepare)(void);

/*
 * Returns true if current's euid is same as p's uid or euid,
 * or has CAP_SYS_NICE to p's user_ns.
 *
 * Called with rcu_read_lock, creds are safe
 */
static bool set_one_prio_perm(struct task_struct *p)
{
	const struct cred *cred = current_cred(), *pcred = __task_cred(p);

	if (pcred->user_ns == cred->user_ns &&
	    (pcred->uid  == cred->euid ||
	     pcred->euid == cred->euid))
		return true;
	if (ns_capable(pcred->user_ns, CAP_SYS_NICE))
		return true;
	return false;
}

/*
 * set the priority of a task
 * - the caller must hold the RCU read lock
 */
static int set_one_prio(struct task_struct *p, int niceval, int error)
{
	int no_nice;

	if (!set_one_prio_perm(p)) {
		error = -EPERM;
		goto out;
	}
	if (niceval < task_nice(p) && !can_nice(p, niceval)) {
		error = -EACCES;
		goto out;
	}
	no_nice = security_task_setnice(p, niceval);
	if (no_nice) {
		error = no_nice;
		goto out;
	}
	if (error == -ESRCH)
		error = 0;
	set_user_nice(p, niceval);
out:
	return error;
}

SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
{
	struct task_struct *g, *p;
	struct user_struct *user;
	const struct cred *cred = current_cred();
	int error = -EINVAL;
	struct pid *pgrp;

	if (which > PRIO_USER || which < PRIO_PROCESS)
		goto out;

	/* normalize: avoid signed division (rounding problems) */
	error = -ESRCH;
	if (niceval < -20)
		niceval = -20;
	if (niceval > 19)
		niceval = 19;

	rcu_read_lock();
	read_lock(&tasklist_lock);
	switch (which) {
		case PRIO_PROCESS:
			if (who)
				p = find_task_by_vpid(who);
			else
				p = current;
			if (p)
				error = set_one_prio(p, niceval, error);
			break;
		case PRIO_PGRP:
			if (who)
				pgrp = find_vpid(who);
			else
				pgrp = task_pgrp(current);
			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
				error = set_one_prio(p, niceval, error);
			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
			break;
		case PRIO_USER:
			user = cred->user;
			if (!who)
				who = cred->uid;
			else if ((who != cred->uid) &&
				 !(user = find_user(who)))
				goto out_unlock;	/* No processes for this user */

			do_each_thread(g, p) {
				if (__task_cred(p)->uid == who)
					error = set_one_prio(p, niceval, error);
			} while_each_thread(g, p);
			if (who != cred->uid)
				free_uid(user);		/* For find_user() */
			break;
	}
out_unlock:
	read_unlock(&tasklist_lock);
	rcu_read_unlock();
out:
	return error;
}

/*
 * Ugh. To avoid negative return values, "getpriority()" will
 * not return the normal nice-value, but a negated value that
 * has been offset by 20 (ie it returns 40..1 instead of -20..19)
 * to stay compatible.
 */
SYSCALL_DEFINE2(getpriority, int, which, int, who)
{
	struct task_struct *g, *p;
	struct user_struct *user;
	const struct cred *cred = current_cred();
	long niceval, retval = -ESRCH;
	struct pid *pgrp;

	if (which > PRIO_USER || which < PRIO_PROCESS)
		return -EINVAL;

	rcu_read_lock();
	read_lock(&tasklist_lock);
	switch (which) {
		case PRIO_PROCESS:
			if (who)
				p = find_task_by_vpid(who);
			else
				p = current;
			if (p) {
				niceval = 20 - task_nice(p);
				if (niceval > retval)
					retval = niceval;
			}
			break;
		case PRIO_PGRP:
			if (who)
				pgrp = find_vpid(who);
			else
				pgrp = task_pgrp(current);
			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
				niceval = 20 - task_nice(p);
				if (niceval > retval)
					retval = niceval;
			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
			break;
		case PRIO_USER:
			user = cred->user;
			if (!who)
				who = cred->uid;
			else if ((who != cred->uid) &&
				 !(user = find_user(who)))
				goto out_unlock;	/* No processes for this user */

			do_each_thread(g, p) {
				if (__task_cred(p)->uid == who) {
					niceval = 20 - task_nice(p);
					if (niceval > retval)
						retval = niceval;
				}
			} while_each_thread(g, p);
			if (who != cred->uid)
				free_uid(user);		/* for find_user() */
			break;
	}
out_unlock:
	read_unlock(&tasklist_lock);
	rcu_read_unlock();

	return retval;
}

/**
 *	emergency_restart - reboot the system
 *
 *	Without shutting down any hardware or taking any locks
 *	reboot the system.  This is called when we know we are in
 *	trouble so this is our best effort to reboot.  This is
 *	safe to call in interrupt context.
 */
void emergency_restart(void)
{
	kmsg_dump(KMSG_DUMP_EMERG);
	machine_emergency_restart();
}
EXPORT_SYMBOL_GPL(emergency_restart);

void kernel_restart_prepare(char *cmd)
{
	blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
	system_state = SYSTEM_RESTART;
	usermodehelper_disable();
	device_shutdown();
	syscore_shutdown();
}

/**
 *	register_reboot_notifier - Register function to be called at reboot time
 *	@nb: Info about notifier function to be called
 *
 *	Registers a function with the list of functions
 *	to be called at reboot time.
 *
 *	Currently always returns zero, as blocking_notifier_chain_register()
 *	always returns zero.
 */
int register_reboot_notifier(struct notifier_block *nb)
{
	return blocking_notifier_chain_register(&reboot_notifier_list, nb);
}
EXPORT_SYMBOL(register_reboot_notifier);

/**
 *	unregister_reboot_notifier - Unregister previously registered reboot notifier
 *	@nb: Hook to be unregistered
 *
 *	Unregisters a previously registered reboot
 *	notifier function.
 *
 *	Returns zero on success, or %-ENOENT on failure.
 */
int unregister_reboot_notifier(struct notifier_block *nb)
{
	return blocking_notifier_chain_unregister(&reboot_notifier_list, nb);
}
EXPORT_SYMBOL(unregister_reboot_notifier);

/**
 *	kernel_restart - reboot the system
 *	@cmd: pointer to buffer containing command to execute for restart
 *		or %NULL
 *
 *	Shutdown everything and perform a clean reboot.
 *	This is not safe to call in interrupt context.
 */
void kernel_restart(char *cmd)
{
	kernel_restart_prepare(cmd);
	if (!cmd)
		printk(KERN_EMERG "Restarting system.\n");
	else
		printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
	kmsg_dump(KMSG_DUMP_RESTART);
	machine_restart(cmd);
}
EXPORT_SYMBOL_GPL(kernel_restart);

static void kernel_shutdown_prepare(enum system_states state)
{
	blocking_notifier_call_chain(&reboot_notifier_list,
		(state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
	system_state = state;
	usermodehelper_disable();
	device_shutdown();
}
/**
 *	kernel_halt - halt the system
 *
 *	Shutdown everything and perform a clean system halt.
 */
void kernel_halt(void)
{
	kernel_shutdown_prepare(SYSTEM_HALT);
	syscore_shutdown();
	printk(KERN_EMERG "System halted.\n");
	kmsg_dump(KMSG_DUMP_HALT);
	machine_halt();
}

EXPORT_SYMBOL_GPL(kernel_halt);

/**
 *	kernel_power_off - power_off the system
 *
 *	Shutdown everything and perform a clean system power_off.
 */
void kernel_power_off(void)
{
	kernel_shutdown_prepare(SYSTEM_POWER_OFF);
	if (pm_power_off_prepare)
		pm_power_off_prepare();
	disable_nonboot_cpus();
	syscore_shutdown();
	printk(KERN_EMERG "Power down.\n");
	kmsg_dump(KMSG_DUMP_POWEROFF);
	machine_power_off();
}
EXPORT_SYMBOL_GPL(kernel_power_off);

static DEFINE_MUTEX(reboot_mutex);

/*
 * Reboot system call: for obvious reasons only root may call it,
 * and even root needs to set up some magic numbers in the registers
 * so that some mistake won't make this reboot the whole machine.
 * You can also set the meaning of the ctrl-alt-del-key here.
 *
 * reboot doesn't sync: do that yourself before calling this.
 */
SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
		void __user *, arg)
{
	char buffer[256];
	int ret = 0;

	/* We only trust the superuser with rebooting the system. */
	if (!capable(CAP_SYS_BOOT))
		return -EPERM;

	/* For safety, we require "magic" arguments. */
	if (magic1 != LINUX_REBOOT_MAGIC1 ||
	    (magic2 != LINUX_REBOOT_MAGIC2 &&
	                magic2 != LINUX_REBOOT_MAGIC2A &&
			magic2 != LINUX_REBOOT_MAGIC2B &&
	                magic2 != LINUX_REBOOT_MAGIC2C))
		return -EINVAL;

	/*
	 * If pid namespaces are enabled and the current task is in a child
	 * pid_namespace, the command is handled by reboot_pid_ns() which will
	 * call do_exit().
	 */
	ret = reboot_pid_ns(task_active_pid_ns(current), cmd);
	if (ret)
		return ret;

	/* Instead of trying to make the power_off code look like
	 * halt when pm_power_off is not set do it the easy way.
	 */
	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
		cmd = LINUX_REBOOT_CMD_HALT;

	mutex_lock(&reboot_mutex);
	switch (cmd) {
	case LINUX_REBOOT_CMD_RESTART:
		kernel_restart(NULL);
		break;

	case LINUX_REBOOT_CMD_CAD_ON:
		C_A_D = 1;
		break;

	case LINUX_REBOOT_CMD_CAD_OFF:
		C_A_D = 0;
		break;

	case LINUX_REBOOT_CMD_HALT:
		kernel_halt();
		do_exit(0);
		panic("cannot halt");

	case LINUX_REBOOT_CMD_POWER_OFF:
		kernel_power_off();
		do_exit(0);
		break;

	case LINUX_REBOOT_CMD_RESTART2:
		if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
			ret = -EFAULT;
			break;
		}
		buffer[sizeof(buffer) - 1] = '\0';

		kernel_restart(buffer);
		break;

#ifdef CONFIG_KEXEC
	case LINUX_REBOOT_CMD_KEXEC:
		ret = kernel_kexec();
		break;
#endif

#ifdef CONFIG_HIBERNATION
	case LINUX_REBOOT_CMD_SW_SUSPEND:
		ret = hibernate();
		break;
#endif

	default:
		ret = -EINVAL;
		break;
	}
	mutex_unlock(&reboot_mutex);
	return ret;
}

static void deferred_cad(struct work_struct *dummy)
{
	kernel_restart(NULL);
}

/*
 * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
 * As it's called within an interrupt, it may NOT sync: the only choice
 * is whether to reboot at once, or just ignore the ctrl-alt-del.
 */
void ctrl_alt_del(void)
{
	static DECLARE_WORK(cad_work, deferred_cad);

	if (C_A_D)
		schedule_work(&cad_work);
	else
		kill_cad_pid(SIGINT, 1);
}
	
/*
 * Unprivileged users may change the real gid to the effective gid
 * or vice versa.  (BSD-style)
 *
 * If you set the real gid at all, or set the effective gid to a value not
 * equal to the real gid, then the saved gid is set to the new effective gid.
 *
 * This makes it possible for a setgid program to completely drop its
 * privileges, which is often a useful assertion to make when you are doing
 * a security audit over a program.
 *
 * The general idea is that a program which uses just setregid() will be
 * 100% compatible with BSD.  A program which uses just setgid() will be
 * 100% compatible with POSIX with saved IDs. 
 *
 * SMP: There are not races, the GIDs are checked only by filesystem
 *      operations (as far as semantic preservation is concerned).
 */
SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (rgid != (gid_t) -1) {
		if (old->gid == rgid ||
		    old->egid == rgid ||
		    nsown_capable(CAP_SETGID))
			new->gid = rgid;
		else
			goto error;
	}
	if (egid != (gid_t) -1) {
		if (old->gid == egid ||
		    old->egid == egid ||
		    old->sgid == egid ||
		    nsown_capable(CAP_SETGID))
			new->egid = egid;
		else
			goto error;
	}

	if (rgid != (gid_t) -1 ||
	    (egid != (gid_t) -1 && egid != old->gid))
		new->sgid = new->egid;
	new->fsgid = new->egid;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

/*
 * setgid() is implemented like SysV w/ SAVED_IDS 
 *
 * SMP: Same implicit races as above.
 */
SYSCALL_DEFINE1(setgid, gid_t, gid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (nsown_capable(CAP_SETGID))
		new->gid = new->egid = new->sgid = new->fsgid = gid;
	else if (gid == old->gid || gid == old->sgid)
		new->egid = new->fsgid = gid;
	else
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

/*
 * change the user struct in a credentials set to match the new UID
 */
static int set_user(struct cred *new)
{
	struct user_struct *new_user;

	new_user = alloc_uid(current_user_ns(), new->uid);
	if (!new_user)
		return -EAGAIN;

	/*
	 * We don't fail in case of NPROC limit excess here because too many
	 * poorly written programs don't check set*uid() return code, assuming
	 * it never fails if called by root.  We may still enforce NPROC limit
	 * for programs doing set*uid()+execve() by harmlessly deferring the
	 * failure to the execve() stage.
	 */
	if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) &&
			new_user != INIT_USER)
		current->flags |= PF_NPROC_EXCEEDED;
	else
		current->flags &= ~PF_NPROC_EXCEEDED;

	free_uid(new->user);
	new->user = new_user;
	return 0;
}

/*
 * Unprivileged users may change the real uid to the effective uid
 * or vice versa.  (BSD-style)
 *
 * If you set the real uid at all, or set the effective uid to a value not
 * equal to the real uid, then the saved uid is set to the new effective uid.
 *
 * This makes it possible for a setuid program to completely drop its
 * privileges, which is often a useful assertion to make when you are doing
 * a security audit over a program.
 *
 * The general idea is that a program which uses just setreuid() will be
 * 100% compatible with BSD.  A program which uses just setuid() will be
 * 100% compatible with POSIX with saved IDs. 
 */
SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (ruid != (uid_t) -1) {
		new->uid = ruid;
		if (old->uid != ruid &&
		    old->euid != ruid &&
		    !nsown_capable(CAP_SETUID))
			goto error;
	}

	if (euid != (uid_t) -1) {
		new->euid = euid;
		if (old->uid != euid &&
		    old->euid != euid &&
		    old->suid != euid &&
		    !nsown_capable(CAP_SETUID))
			goto error;
	}

	if (new->uid != old->uid) {
		retval = set_user(new);
		if (retval < 0)
			goto error;
	}
	if (ruid != (uid_t) -1 ||
	    (euid != (uid_t) -1 && euid != old->uid))
		new->suid = new->euid;
	new->fsuid = new->euid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_RE);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}
		
/*
 * setuid() is implemented like SysV with SAVED_IDS 
 * 
 * Note that SAVED_ID's is deficient in that a setuid root program
 * like sendmail, for example, cannot set its uid to be a normal 
 * user and then switch back, because if you're root, setuid() sets
 * the saved uid too.  If you don't like this, blame the bright people
 * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
 * will allow a root program to temporarily drop privileges and be able to
 * regain them by swapping the real and effective uid.  
 */
SYSCALL_DEFINE1(setuid, uid_t, uid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (nsown_capable(CAP_SETUID)) {
		new->suid = new->uid = uid;
		if (uid != old->uid) {
			retval = set_user(new);
			if (retval < 0)
				goto error;
		}
	} else if (uid != old->uid && uid != new->suid) {
		goto error;
	}

	new->fsuid = new->euid = uid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_ID);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}


/*
 * This function implements a generic ability to update ruid, euid,
 * and suid.  This allows you to implement the 4.4 compatible seteuid().
 */
SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;

	old = current_cred();

	retval = -EPERM;
	if (!nsown_capable(CAP_SETUID)) {
		if (ruid != (uid_t) -1 && ruid != old->uid &&
		    ruid != old->euid  && ruid != old->suid)
			goto error;
		if (euid != (uid_t) -1 && euid != old->uid &&
		    euid != old->euid  && euid != old->suid)
			goto error;
		if (suid != (uid_t) -1 && suid != old->uid &&
		    suid != old->euid  && suid != old->suid)
			goto error;
	}

	if (ruid != (uid_t) -1) {
		new->uid = ruid;
		if (ruid != old->uid) {
			retval = set_user(new);
			if (retval < 0)
				goto error;
		}
	}
	if (euid != (uid_t) -1)
		new->euid = euid;
	if (suid != (uid_t) -1)
		new->suid = suid;
	new->fsuid = new->euid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_RES);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)
{
	const struct cred *cred = current_cred();
	int retval;

	if (!(retval   = put_user(cred->uid,  ruid)) &&
	    !(retval   = put_user(cred->euid, euid)))
		retval = put_user(cred->suid, suid);

	return retval;
}

/*
 * Same as above, but for rgid, egid, sgid.
 */
SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
{
	const struct cred *old;
	struct cred *new;
	int retval;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (!nsown_capable(CAP_SETGID)) {
		if (rgid != (gid_t) -1 && rgid != old->gid &&
		    rgid != old->egid  && rgid != old->sgid)
			goto error;
		if (egid != (gid_t) -1 && egid != old->gid &&
		    egid != old->egid  && egid != old->sgid)
			goto error;
		if (sgid != (gid_t) -1 && sgid != old->gid &&
		    sgid != old->egid  && sgid != old->sgid)
			goto error;
	}

	if (rgid != (gid_t) -1)
		new->gid = rgid;
	if (egid != (gid_t) -1)
		new->egid = egid;
	if (sgid != (gid_t) -1)
		new->sgid = sgid;
	new->fsgid = new->egid;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)
{
	const struct cred *cred = current_cred();
	int retval;

	if (!(retval   = put_user(cred->gid,  rgid)) &&
	    !(retval   = put_user(cred->egid, egid)))
		retval = put_user(cred->sgid, sgid);

	return retval;
}


/*
 * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
 * is used for "access()" and for the NFS daemon (letting nfsd stay at
 * whatever uid it wants to). It normally shadows "euid", except when
 * explicitly set by setfsuid() or for access..
 */
SYSCALL_DEFINE1(setfsuid, uid_t, uid)
{
	const struct cred *old;
	struct cred *new;
	uid_t old_fsuid;

	new = prepare_creds();
	if (!new)
		return current_fsuid();
	old = current_cred();
	old_fsuid = old->fsuid;

	if (uid == old->uid  || uid == old->euid  ||
	    uid == old->suid || uid == old->fsuid ||
	    nsown_capable(CAP_SETUID)) {
		if (uid != old_fsuid) {
			new->fsuid = uid;
			if (security_task_fix_setuid(new, old, LSM_SETID_FS) == 0)
				goto change_okay;
		}
	}

	abort_creds(new);
	return old_fsuid;

change_okay:
	commit_creds(new);
	return old_fsuid;
}

/*
 * Samma på svenska..
 */
SYSCALL_DEFINE1(setfsgid, gid_t, gid)
{
	const struct cred *old;
	struct cred *new;
	gid_t old_fsgid;

	new = prepare_creds();
	if (!new)
		return current_fsgid();
	old = current_cred();
	old_fsgid = old->fsgid;

	if (gid == old->gid  || gid == old->egid  ||
	    gid == old->sgid || gid == old->fsgid ||
	    nsown_capable(CAP_SETGID)) {
		if (gid != old_fsgid) {
			new->fsgid = gid;
			goto change_okay;
		}
	}

	abort_creds(new);
	return old_fsgid;

change_okay:
	commit_creds(new);
	return old_fsgid;
}

void do_sys_times(struct tms *tms)
{
	cputime_t tgutime, tgstime, cutime, cstime;

	spin_lock_irq(&current->sighand->siglock);
	thread_group_times(current, &tgutime, &tgstime);
	cutime = current->signal->cutime;
	cstime = current->signal->cstime;
	spin_unlock_irq(&current->sighand->siglock);
	tms->tms_utime = cputime_to_clock_t(tgutime);
	tms->tms_stime = cputime_to_clock_t(tgstime);
	tms->tms_cutime = cputime_to_clock_t(cutime);
	tms->tms_cstime = cputime_to_clock_t(cstime);
}

SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
{
	if (tbuf) {
		struct tms tmp;

		do_sys_times(&tmp);
		if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
			return -EFAULT;
	}
	force_successful_syscall_return();
	return (long) jiffies_64_to_clock_t(get_jiffies_64());
}

/*
 * This needs some heavy checking ...
 * I just haven't the stomach for it. I also don't fully
 * understand sessions/pgrp etc. Let somebody who does explain it.
 *
 * OK, I think I have the protection semantics right.... this is really
 * only important on a multi-user system anyway, to make sure one user
 * can't send a signal to a process owned by another.  -TYT, 12/12/91
 *
 * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
 * LBT 04.03.94
 */
SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
{
	struct task_struct *p;
	struct task_struct *group_leader = current->group_leader;
	struct pid *pgrp;
	int err;

	if (!pid)
		pid = task_pid_vnr(group_leader);
	if (!pgid)
		pgid = pid;
	if (pgid < 0)
		return -EINVAL;
	rcu_read_lock();

	/* From this point forward we keep holding onto the tasklist lock
	 * so that our parent does not change from under us. -DaveM
	 */
	write_lock_irq(&tasklist_lock);

	err = -ESRCH;
	p = find_task_by_vpid(pid);
	if (!p)
		goto out;

	err = -EINVAL;
	if (!thread_group_leader(p))
		goto out;

	if (same_thread_group(p->real_parent, group_leader)) {
		err = -EPERM;
		if (task_session(p) != task_session(group_leader))
			goto out;
		err = -EACCES;
		if (p->did_exec)
			goto out;
	} else {
		err = -ESRCH;
		if (p != group_leader)
			goto out;
	}

	err = -EPERM;
	if (p->signal->leader)
		goto out;

	pgrp = task_pid(p);
	if (pgid != pid) {
		struct task_struct *g;

		pgrp = find_vpid(pgid);
		g = pid_task(pgrp, PIDTYPE_PGID);
		if (!g || task_session(g) != task_session(group_leader))
			goto out;
	}

	err = security_task_setpgid(p, pgid);
	if (err)
		goto out;

	if (task_pgrp(p) != pgrp)
		change_pid(p, PIDTYPE_PGID, pgrp);

	err = 0;
out:
	/* All paths lead to here, thus we are safe. -DaveM */
	write_unlock_irq(&tasklist_lock);
	rcu_read_unlock();
	return err;
}

SYSCALL_DEFINE1(getpgid, pid_t, pid)
{
	struct task_struct *p;
	struct pid *grp;
	int retval;

	rcu_read_lock();
	if (!pid)
		grp = task_pgrp(current);
	else {
		retval = -ESRCH;
		p = find_task_by_vpid(pid);
		if (!p)
			goto out;
		grp = task_pgrp(p);
		if (!grp)
			goto out;

		retval = security_task_getpgid(p);
		if (retval)
			goto out;
	}
	retval = pid_vnr(grp);
out:
	rcu_read_unlock();
	return retval;
}

#ifdef __ARCH_WANT_SYS_GETPGRP

SYSCALL_DEFINE0(getpgrp)
{
	return sys_getpgid(0);
}

#endif

SYSCALL_DEFINE1(getsid, pid_t, pid)
{
	struct task_struct *p;
	struct pid *sid;
	int retval;

	rcu_read_lock();
	if (!pid)
		sid = task_session(current);
	else {
		retval = -ESRCH;
		p = find_task_by_vpid(pid);
		if (!p)
			goto out;
		sid = task_session(p);
		if (!sid)
			goto out;

		retval = security_task_getsid(p);
		if (retval)
			goto out;
	}
	retval = pid_vnr(sid);
out:
	rcu_read_unlock();
	return retval;
}

SYSCALL_DEFINE0(setsid)
{
	struct task_struct *group_leader = current->group_leader;
	struct pid *sid = task_pid(group_leader);
	pid_t session = pid_vnr(sid);
	int err = -EPERM;

	write_lock_irq(&tasklist_lock);
	/* Fail if I am already a session leader */
	if (group_leader->signal->leader)
		goto out;

	/* Fail if a process group id already exists that equals the
	 * proposed session id.
	 */
	if (pid_task(sid, PIDTYPE_PGID))
		goto out;

	group_leader->signal->leader = 1;
	__set_special_pids(sid);

	proc_clear_tty(group_leader);

	err = session;
out:
	write_unlock_irq(&tasklist_lock);
	if (err > 0) {
		proc_sid_connector(group_leader);
		sched_autogroup_create_attach(group_leader);
	}
	return err;
}

DECLARE_RWSEM(uts_sem);

#ifdef COMPAT_UTS_MACHINE
#define override_architecture(name) \
	(personality(current->personality) == PER_LINUX32 && \
	 copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
		      sizeof(COMPAT_UTS_MACHINE)))
#else
#define override_architecture(name)	0
#endif

/*
 * Work around broken programs that cannot handle "Linux 3.0".
 * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
 */
static int override_release(char __user *release, int len)
{
	int ret = 0;
	char buf[65];

	if (current->personality & UNAME26) {
		char *rest = UTS_RELEASE;
		int ndots = 0;
		unsigned v;

		while (*rest) {
			if (*rest == '.' && ++ndots >= 3)
				break;
			if (!isdigit(*rest) && *rest != '.')
				break;
			rest++;
		}
		v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
		snprintf(buf, len, "2.6.%u%s", v, rest);
		ret = copy_to_user(release, buf, len);
	}
	return ret;
}

SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
	int errno = 0;

	down_read(&uts_sem);
	if (copy_to_user(name, utsname(), sizeof *name))
		errno = -EFAULT;
	up_read(&uts_sem);

	if (!errno && override_release(name->release, sizeof(name->release)))
		errno = -EFAULT;
	if (!errno && override_architecture(name))
		errno = -EFAULT;
	return errno;
}

#ifdef __ARCH_WANT_SYS_OLD_UNAME
/*
 * Old cruft
 */
SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
{
	int error = 0;

	if (!name)
		return -EFAULT;

	down_read(&uts_sem);
	if (copy_to_user(name, utsname(), sizeof(*name)))
		error = -EFAULT;
	up_read(&uts_sem);

	if (!error && override_release(name->release, sizeof(name->release)))
		error = -EFAULT;
	if (!error && override_architecture(name))
		error = -EFAULT;
	return error;
}

SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
{
	int error;

	if (!name)
		return -EFAULT;
	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
		return -EFAULT;

	down_read(&uts_sem);
	error = __copy_to_user(&name->sysname, &utsname()->sysname,
			       __OLD_UTS_LEN);
	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
				__OLD_UTS_LEN);
	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
	error |= __copy_to_user(&name->release, &utsname()->release,
				__OLD_UTS_LEN);
	error |= __put_user(0, name->release + __OLD_UTS_LEN);
	error |= __copy_to_user(&name->version, &utsname()->version,
				__OLD_UTS_LEN);
	error |= __put_user(0, name->version + __OLD_UTS_LEN);
	error |= __copy_to_user(&name->machine, &utsname()->machine,
				__OLD_UTS_LEN);
	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
	up_read(&uts_sem);

	if (!error && override_architecture(name))
		error = -EFAULT;
	if (!error && override_release(name->release, sizeof(name->release)))
		error = -EFAULT;
	return error ? -EFAULT : 0;
}
#endif

SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
{
	int errno;
	char tmp[__NEW_UTS_LEN];

	if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
		return -EPERM;

	if (len < 0 || len > __NEW_UTS_LEN)
		return -EINVAL;
	down_write(&uts_sem);
	errno = -EFAULT;
	if (!copy_from_user(tmp, name, len)) {
		struct new_utsname *u = utsname();

		memcpy(u->nodename, tmp, len);
		memset(u->nodename + len, 0, sizeof(u->nodename) - len);
		errno = 0;
	}
	uts_proc_notify(UTS_PROC_HOSTNAME);
	up_write(&uts_sem);
	return errno;
}

#ifdef __ARCH_WANT_SYS_GETHOSTNAME

SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
{
	int i, errno;
	struct new_utsname *u;

	if (len < 0)
		return -EINVAL;
	down_read(&uts_sem);
	u = utsname();
	i = 1 + strlen(u->nodename);
	if (i > len)
		i = len;
	errno = 0;
	if (copy_to_user(name, u->nodename, i))
		errno = -EFAULT;
	up_read(&uts_sem);
	return errno;
}

#endif

/*
 * Only setdomainname; getdomainname can be implemented by calling
 * uname()
 */
SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
{
	int errno;
	char tmp[__NEW_UTS_LEN];

	if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
		return -EPERM;
	if (len < 0 || len > __NEW_UTS_LEN)
		return -EINVAL;

	down_write(&uts_sem);
	errno = -EFAULT;
	if (!copy_from_user(tmp, name, len)) {
		struct new_utsname *u = utsname();

		memcpy(u->domainname, tmp, len);
		memset(u->domainname + len, 0, sizeof(u->domainname) - len);
		errno = 0;
	}
	uts_proc_notify(UTS_PROC_DOMAINNAME);
	up_write(&uts_sem);
	return errno;
}

SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
	struct rlimit value;
	int ret;

	ret = do_prlimit(current, resource, NULL, &value);
	if (!ret)
		ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;

	return ret;
}

#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT

/*
 *	Back compatibility for getrlimit. Needed for some apps.
 */
 
SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
		struct rlimit __user *, rlim)
{
	struct rlimit x;
	if (resource >= RLIM_NLIMITS)
		return -EINVAL;

	task_lock(current->group_leader);
	x = current->signal->rlim[resource];
	task_unlock(current->group_leader);
	if (x.rlim_cur > 0x7FFFFFFF)
		x.rlim_cur = 0x7FFFFFFF;
	if (x.rlim_max > 0x7FFFFFFF)
		x.rlim_max = 0x7FFFFFFF;
	return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
}

#endif

static inline bool rlim64_is_infinity(__u64 rlim64)
{
#if BITS_PER_LONG < 64
	return rlim64 >= ULONG_MAX;
#else
	return rlim64 == RLIM64_INFINITY;
#endif
}

static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
{
	if (rlim->rlim_cur == RLIM_INFINITY)
		rlim64->rlim_cur = RLIM64_INFINITY;
	else
		rlim64->rlim_cur = rlim->rlim_cur;
	if (rlim->rlim_max == RLIM_INFINITY)
		rlim64->rlim_max = RLIM64_INFINITY;
	else
		rlim64->rlim_max = rlim->rlim_max;
}

static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
{
	if (rlim64_is_infinity(rlim64->rlim_cur))
		rlim->rlim_cur = RLIM_INFINITY;
	else
		rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
	if (rlim64_is_infinity(rlim64->rlim_max))
		rlim->rlim_max = RLIM_INFINITY;
	else
		rlim->rlim_max = (unsigned long)rlim64->rlim_max;
}

/* make sure you are allowed to change @tsk limits before calling this */
int do_prlimit(struct task_struct *tsk, unsigned int resource,
		struct rlimit *new_rlim, struct rlimit *old_rlim)
{
	struct rlimit *rlim;
	int retval = 0;

	if (resource >= RLIM_NLIMITS)
		return -EINVAL;
	if (new_rlim) {
		if (new_rlim->rlim_cur > new_rlim->rlim_max)
			return -EINVAL;
		if (resource == RLIMIT_NOFILE &&
				new_rlim->rlim_max > sysctl_nr_open)
			return -EPERM;
	}

	/* protect tsk->signal and tsk->sighand from disappearing */
	read_lock(&tasklist_lock);
	if (!tsk->sighand) {
		retval = -ESRCH;
		goto out;
	}

	rlim = tsk->signal->rlim + resource;
	task_lock(tsk->group_leader);
	if (new_rlim) {
		/* Keep the capable check against init_user_ns until
		   cgroups can contain all limits */
		if (new_rlim->rlim_max > rlim->rlim_max &&
				!capable(CAP_SYS_RESOURCE))
			retval = -EPERM;
		if (!retval)
			retval = security_task_setrlimit(tsk->group_leader,
					resource, new_rlim);
		if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
			/*
			 * The caller is asking for an immediate RLIMIT_CPU
			 * expiry.  But we use the zero value to mean "it was
			 * never set".  So let's cheat and make it one second
			 * instead
			 */
			new_rlim->rlim_cur = 1;
		}
	}
	if (!retval) {
		if (old_rlim)
			*old_rlim = *rlim;
		if (new_rlim)
			*rlim = *new_rlim;
	}
	task_unlock(tsk->group_leader);

	/*
	 * RLIMIT_CPU handling.   Note that the kernel fails to return an error
	 * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
	 * very long-standing error, and fixing it now risks breakage of
	 * applications, so we live with it
	 */
	 if (!retval && new_rlim && resource == RLIMIT_CPU &&
			 new_rlim->rlim_cur != RLIM_INFINITY)
		update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
	read_unlock(&tasklist_lock);
	return retval;
}

/* rcu lock must be held */
static int check_prlimit_permission(struct task_struct *task)
{
	const struct cred *cred = current_cred(), *tcred;

	if (current == task)
		return 0;

	tcred = __task_cred(task);
	if (cred->user_ns == tcred->user_ns &&
	    (cred->uid == tcred->euid &&
	     cred->uid == tcred->suid &&
	     cred->uid == tcred->uid  &&
	     cred->gid == tcred->egid &&
	     cred->gid == tcred->sgid &&
	     cred->gid == tcred->gid))
		return 0;
	if (ns_capable(tcred->user_ns, CAP_SYS_RESOURCE))
		return 0;

	return -EPERM;
}

SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
		const struct rlimit64 __user *, new_rlim,
		struct rlimit64 __user *, old_rlim)
{
	struct rlimit64 old64, new64;
	struct rlimit old, new;
	struct task_struct *tsk;
	int ret;

	if (new_rlim) {
		if (copy_from_user(&new64, new_rlim, sizeof(new64)))
			return -EFAULT;
		rlim64_to_rlim(&new64, &new);
	}

	rcu_read_lock();
	tsk = pid ? find_task_by_vpid(pid) : current;
	if (!tsk) {
		rcu_read_unlock();
		return -ESRCH;
	}
	ret = check_prlimit_permission(tsk);
	if (ret) {
		rcu_read_unlock();
		return ret;
	}
	get_task_struct(tsk);
	rcu_read_unlock();

	ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
			old_rlim ? &old : NULL);

	if (!ret && old_rlim) {
		rlim_to_rlim64(&old, &old64);
		if (copy_to_user(old_rlim, &old64, sizeof(old64)))
			ret = -EFAULT;
	}

	put_task_struct(tsk);
	return ret;
}

SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
	struct rlimit new_rlim;

	if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
		return -EFAULT;
	return do_prlimit(current, resource, &new_rlim, NULL);
}

/*
 * It would make sense to put struct rusage in the task_struct,
 * except that would make the task_struct be *really big*.  After
 * task_struct gets moved into malloc'ed memory, it would
 * make sense to do this.  It will make moving the rest of the information
 * a lot simpler!  (Which we're not doing right now because we're not
 * measuring them yet).
 *
 * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
 * races with threads incrementing their own counters.  But since word
 * reads are atomic, we either get new values or old values and we don't
 * care which for the sums.  We always take the siglock to protect reading
 * the c* fields from p->signal from races with exit.c updating those
 * fields when reaping, so a sample either gets all the additions of a
 * given child after it's reaped, or none so this sample is before reaping.
 *
 * Locking:
 * We need to take the siglock for CHILDEREN, SELF and BOTH
 * for  the cases current multithreaded, non-current single threaded
 * non-current multithreaded.  Thread traversal is now safe with
 * the siglock held.
 * Strictly speaking, we donot need to take the siglock if we are current and
 * single threaded,  as no one else can take our signal_struct away, no one
 * else can  reap the  children to update signal->c* counters, and no one else
 * can race with the signal-> fields. If we do not take any lock, the
 * signal-> fields could be read out of order while another thread was just
 * exiting. So we should  place a read memory barrier when we avoid the lock.
 * On the writer side,  write memory barrier is implied in  __exit_signal
 * as __exit_signal releases  the siglock spinlock after updating the signal->
 * fields. But we don't do this yet to keep things simple.
 *
 */

static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r)
{
	r->ru_nvcsw += t->nvcsw;
	r->ru_nivcsw += t->nivcsw;
	r->ru_minflt += t->min_flt;
	r->ru_majflt += t->maj_flt;
	r->ru_inblock += task_io_get_inblock(t);
	r->ru_oublock += task_io_get_oublock(t);
}

static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
{
	struct task_struct *t;
	unsigned long flags;
	cputime_t tgutime, tgstime, utime, stime;
	unsigned long maxrss = 0;

	memset((char *) r, 0, sizeof *r);
	utime = stime = 0;

	if (who == RUSAGE_THREAD) {
		task_times(current, &utime, &stime);
		accumulate_thread_rusage(p, r);
		maxrss = p->signal->maxrss;
		goto out;
	}

	if (!lock_task_sighand(p, &flags))
		return;

	switch (who) {
		case RUSAGE_BOTH:
		case RUSAGE_CHILDREN:
			utime = p->signal->cutime;
			stime = p->signal->cstime;
			r->ru_nvcsw = p->signal->cnvcsw;
			r->ru_nivcsw = p->signal->cnivcsw;
			r->ru_minflt = p->signal->cmin_flt;
			r->ru_majflt = p->signal->cmaj_flt;
			r->ru_inblock = p->signal->cinblock;
			r->ru_oublock = p->signal->coublock;
			maxrss = p->signal->cmaxrss;

			if (who == RUSAGE_CHILDREN)
				break;

		case RUSAGE_SELF:
			thread_group_times(p, &tgutime, &tgstime);
			utime += tgutime;
			stime += tgstime;
			r->ru_nvcsw += p->signal->nvcsw;
			r->ru_nivcsw += p->signal->nivcsw;
			r->ru_minflt += p->signal->min_flt;
			r->ru_majflt += p->signal->maj_flt;
			r->ru_inblock += p->signal->inblock;
			r->ru_oublock += p->signal->oublock;
			if (maxrss < p->signal->maxrss)
				maxrss = p->signal->maxrss;
			t = p;
			do {
				accumulate_thread_rusage(t, r);
				t = next_thread(t);
			} while (t != p);
			break;

		default:
			BUG();
	}
	unlock_task_sighand(p, &flags);

out:
	cputime_to_timeval(utime, &r->ru_utime);
	cputime_to_timeval(stime, &r->ru_stime);

	if (who != RUSAGE_CHILDREN) {
		struct mm_struct *mm = get_task_mm(p);
		if (mm) {
			setmax_mm_hiwater_rss(&maxrss, mm);
			mmput(mm);
		}
	}
	r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */
}

int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
{
	struct rusage r;
	k_getrusage(p, who, &r);
	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
}

SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
{
	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
	    who != RUSAGE_THREAD)
		return -EINVAL;
	return getrusage(current, who, ru);
}

SYSCALL_DEFINE1(umask, int, mask)
{
	mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
	return mask;
}

#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm(int opt, unsigned long addr,
			unsigned long arg4, unsigned long arg5)
{
	unsigned long rlim = rlimit(RLIMIT_DATA);
	unsigned long vm_req_flags;
	unsigned long vm_bad_flags;
	struct vm_area_struct *vma;
	int error = 0;
	struct mm_struct *mm = current->mm;

	if (arg4 | arg5)
		return -EINVAL;

	if (!capable(CAP_SYS_RESOURCE))
		return -EPERM;

	if (addr >= TASK_SIZE)
		return -EINVAL;

	down_read(&mm->mmap_sem);
	vma = find_vma(mm, addr);

	if (opt != PR_SET_MM_START_BRK && opt != PR_SET_MM_BRK) {
		/* It must be existing VMA */
		if (!vma || vma->vm_start > addr)
			goto out;
	}

	error = -EINVAL;
	switch (opt) {
	case PR_SET_MM_START_CODE:
	case PR_SET_MM_END_CODE:
		vm_req_flags = VM_READ | VM_EXEC;
		vm_bad_flags = VM_WRITE | VM_MAYSHARE;

		if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
		    (vma->vm_flags & vm_bad_flags))
			goto out;

		if (opt == PR_SET_MM_START_CODE)
			mm->start_code = addr;
		else
			mm->end_code = addr;
		break;

	case PR_SET_MM_START_DATA:
	case PR_SET_MM_END_DATA:
		vm_req_flags = VM_READ | VM_WRITE;
		vm_bad_flags = VM_EXEC | VM_MAYSHARE;

		if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
		    (vma->vm_flags & vm_bad_flags))
			goto out;

		if (opt == PR_SET_MM_START_DATA)
			mm->start_data = addr;
		else
			mm->end_data = addr;
		break;

	case PR_SET_MM_START_STACK:

#ifdef CONFIG_STACK_GROWSUP
		vm_req_flags = VM_READ | VM_WRITE | VM_GROWSUP;
#else
		vm_req_flags = VM_READ | VM_WRITE | VM_GROWSDOWN;
#endif
		if ((vma->vm_flags & vm_req_flags) != vm_req_flags)
			goto out;

		mm->start_stack = addr;
		break;

	case PR_SET_MM_START_BRK:
		if (addr <= mm->end_data)
			goto out;

		if (rlim < RLIM_INFINITY &&
		    (mm->brk - addr) +
		    (mm->end_data - mm->start_data) > rlim)
			goto out;

		mm->start_brk = addr;
		break;

	case PR_SET_MM_BRK:
		if (addr <= mm->end_data)
			goto out;

		if (rlim < RLIM_INFINITY &&
		    (addr - mm->start_brk) +
		    (mm->end_data - mm->start_data) > rlim)
			goto out;

		mm->brk = addr;
		break;

	default:
		error = -EINVAL;
		goto out;
	}

	error = 0;

out:
	up_read(&mm->mmap_sem);

	return error;
}
#else /* CONFIG_CHECKPOINT_RESTORE */
static int prctl_set_mm(int opt, unsigned long addr,
			unsigned long arg4, unsigned long arg5)
{
	return -EINVAL;
}
#endif

SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
		unsigned long, arg4, unsigned long, arg5)
{
	struct task_struct *me = current;
	unsigned char comm[sizeof(me->comm)];
	long error;

	error = security_task_prctl(option, arg2, arg3, arg4, arg5);
	if (error != -ENOSYS)
		return error;

	error = 0;
	switch (option) {
		case PR_SET_PDEATHSIG:
			if (!valid_signal(arg2)) {
				error = -EINVAL;
				break;
			}
			me->pdeath_signal = arg2;
			error = 0;
			break;
		case PR_GET_PDEATHSIG:
			error = put_user(me->pdeath_signal, (int __user *)arg2);
			break;
		case PR_GET_DUMPABLE:
			error = get_dumpable(me->mm);
			break;
		case PR_SET_DUMPABLE:
			if (arg2 < 0 || arg2 > 1) {
				error = -EINVAL;
				break;
			}
			set_dumpable(me->mm, arg2);
			error = 0;
			break;

		case PR_SET_UNALIGN:
			error = SET_UNALIGN_CTL(me, arg2);
			break;
		case PR_GET_UNALIGN:
			error = GET_UNALIGN_CTL(me, arg2);
			break;
		case PR_SET_FPEMU:
			error = SET_FPEMU_CTL(me, arg2);
			break;
		case PR_GET_FPEMU:
			error = GET_FPEMU_CTL(me, arg2);
			break;
		case PR_SET_FPEXC:
			error = SET_FPEXC_CTL(me, arg2);
			break;
		case PR_GET_FPEXC:
			error = GET_FPEXC_CTL(me, arg2);
			break;
		case PR_GET_TIMING:
			error = PR_TIMING_STATISTICAL;
			break;
		case PR_SET_TIMING:
			if (arg2 != PR_TIMING_STATISTICAL)
				error = -EINVAL;
			else
				error = 0;
			break;

		case PR_SET_NAME:
			comm[sizeof(me->comm)-1] = 0;
			if (strncpy_from_user(comm, (char __user *)arg2,
					      sizeof(me->comm) - 1) < 0)
				return -EFAULT;
			set_task_comm(me, comm);
			proc_comm_connector(me);
			return 0;
		case PR_GET_NAME:
			get_task_comm(comm, me);
			if (copy_to_user((char __user *)arg2, comm,
					 sizeof(comm)))
				return -EFAULT;
			return 0;
		case PR_GET_ENDIAN:
			error = GET_ENDIAN(me, arg2);
			break;
		case PR_SET_ENDIAN:
			error = SET_ENDIAN(me, arg2);
			break;

		case PR_GET_SECCOMP:
			error = prctl_get_seccomp();
			break;
		case PR_SET_SECCOMP:
			error = prctl_set_seccomp(arg2);
			break;
		case PR_GET_TSC:
			error = GET_TSC_CTL(arg2);
			break;
		case PR_SET_TSC:
			error = SET_TSC_CTL(arg2);
			break;
		case PR_TASK_PERF_EVENTS_DISABLE:
			error = perf_event_task_disable();
			break;
		case PR_TASK_PERF_EVENTS_ENABLE:
			error = perf_event_task_enable();
			break;
		case PR_GET_TIMERSLACK:
			error = current->timer_slack_ns;
			break;
		case PR_SET_TIMERSLACK:
			if (arg2 <= 0)
				current->timer_slack_ns =
					current->default_timer_slack_ns;
			else
				current->timer_slack_ns = arg2;
			error = 0;
			break;
		case PR_MCE_KILL:
			if (arg4 | arg5)
				return -EINVAL;
			switch (arg2) {
			case PR_MCE_KILL_CLEAR:
				if (arg3 != 0)
					return -EINVAL;
				current->flags &= ~PF_MCE_PROCESS;
				break;
			case PR_MCE_KILL_SET:
				current->flags |= PF_MCE_PROCESS;
				if (arg3 == PR_MCE_KILL_EARLY)
					current->flags |= PF_MCE_EARLY;
				else if (arg3 == PR_MCE_KILL_LATE)
					current->flags &= ~PF_MCE_EARLY;
				else if (arg3 == PR_MCE_KILL_DEFAULT)
					current->flags &=
						~(PF_MCE_EARLY|PF_MCE_PROCESS);
				else
					return -EINVAL;
				break;
			default:
				return -EINVAL;
			}
			error = 0;
			break;
		case PR_MCE_KILL_GET:
			if (arg2 | arg3 | arg4 | arg5)
				return -EINVAL;
			if (current->flags & PF_MCE_PROCESS)
				error = (current->flags & PF_MCE_EARLY) ?
					PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
			else
				error = PR_MCE_KILL_DEFAULT;
			break;
		case PR_SET_MM:
			error = prctl_set_mm(arg2, arg3, arg4, arg5);
			break;
		case PR_SET_CHILD_SUBREAPER:
			me->signal->is_child_subreaper = !!arg2;
			error = 0;
			break;
		case PR_GET_CHILD_SUBREAPER:
			error = put_user(me->signal->is_child_subreaper,
					 (int __user *) arg2);
			break;
		default:
			error = -EINVAL;
			break;
	}
	return error;
}

SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
		struct getcpu_cache __user *, unused)
{
	int err = 0;
	int cpu = raw_smp_processor_id();
	if (cpup)
		err |= put_user(cpu, cpup);
	if (nodep)
		err |= put_user(cpu_to_node(cpu), nodep);
	return err ? -EFAULT : 0;
}

char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";

static void argv_cleanup(struct subprocess_info *info)
{
	argv_free(info->argv);
}

/**
 * orderly_poweroff - Trigger an orderly system poweroff
 * @force: force poweroff if command execution fails
 *
 * This may be called from any context to trigger a system shutdown.
 * If the orderly shutdown fails, it will force an immediate shutdown.
 */
int orderly_poweroff(bool force)
{
	int argc;
	char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
	static char *envp[] = {
		"HOME=/",
		"PATH=/sbin:/bin:/usr/sbin:/usr/bin",
		NULL
	};
	int ret = -ENOMEM;
	struct subprocess_info *info;

	if (argv == NULL) {
		printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
		       __func__, poweroff_cmd);
		goto out;
	}

	info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
	if (info == NULL) {
		argv_free(argv);
		goto out;
	}

	call_usermodehelper_setfns(info, NULL, argv_cleanup, NULL);

	ret = call_usermodehelper_exec(info, UMH_NO_WAIT);

  out:
	if (ret && force) {
		printk(KERN_WARNING "Failed to start orderly shutdown: "
		       "forcing the issue\n");

		/* I guess this should try to kick off some daemon to
		   sync and poweroff asap.  Or not even bother syncing
		   if we're doing an emergency shutdown? */
		emergency_sync();
		kernel_power_off();
	}

	return ret;
}
EXPORT_SYMBOL_GPL(orderly_poweroff);