Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 7dda18a44bf22ff0decb3c370114ccd73224f6bb / . / arch / arm / mach-msm / Kconfig
blob: 18b1c5ab7349a0c0fe0b1cacf24fc806a1a47981 [file] [log] [blame]
Brian Swetland1637de02008-09-09 07:13:33 -0700[diff] [blame]1if ARCH_MSM
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]3menu "MSM SoC Type"
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]4
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]5config ARCH_MSM7X01A
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]6 bool "MSM7x00A / MSM7x01A"
7 select ARCH_MSM_ARM11
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]8 select MSM_VIC
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]9 select CPU_V6
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]10 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]11 select MSM_REMOTE_SPINLOCK_SWP
12
13config ARCH_MSM7X25
14 bool "MSM7x25"
15 select ARCH_MSM_ARM11
16 select MSM_VIC
17 select CPU_V6
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]18 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]19 select MSM_REMOTE_SPINLOCK_SWP
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]20 select MULTI_IRQ_HANDLER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]21
22config ARCH_MSM7X27
23 bool "MSM7x27"
24 select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
Trilok Soni7ff06e02012-10-15 01:05:24 +0530[diff] [blame]25 select ARCH_HAS_BARRIERS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]26 select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
27 select MSM_VIC
28 select CPU_V6 if MSM_SOC_REV_NONE
29 select CPU_V7 if MSM_SOC_REV_A
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]30 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]31 select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
32 select MSM_GPIOMUX
33 select REGULATOR
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]34 select MULTI_IRQ_HANDLER
Pankaj Kumar75c86fd2011-10-01 18:51:09 +0530[diff] [blame]35 select MSM_PROC_COMM_REGULATOR
Laura Abbott1fbd2e62011-12-18 10:26:46 -0800[diff] [blame]36 select CLEANCACHE
37 select QCACHE
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]38 select MSM_PM2 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]39 select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Dasd4c39f92012-05-14 17:41:49 +0530[diff] [blame]40 select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]41 select MIGHT_HAVE_CACHE_L2X0
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]42 select MSM_MODEM_RESTART
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]43
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]44config ARCH_MSM7X30
45 bool "MSM7x30"
46 select ARCH_MSM_SCORPION
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]47 select MSM_VIC
48 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]49 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]50 select MSM_REMOTE_SPINLOCK_DEKKERS
51 select ARCH_SPARSEMEM_ENABLE
Laura Abbott78593b52011-09-26 18:48:14 -0700[diff] [blame]52 select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]53 select MIGRATION
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]54 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]55 select RESERVE_FIRST_PAGE
56 select MSM_DALRPC
57 select MSM_SPM_V1
58 select REGULATOR
Justin Paupore637a25d2011-07-14 17:11:04 -0700[diff] [blame]59 select MSM_PROC_COMM_REGULATOR
Taniya Dasbae99fb2011-10-12 09:55:13 +0530[diff] [blame]60 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]61 select MSM_PM2 if PM
Chintan Pandyabb021762012-06-21 15:03:29 +0530[diff] [blame]62 select HOLES_IN_ZONE if SPARSEMEM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]63 select MSM_MODEM_RESTART
Chintan Pandya62a2f7c2012-10-30 12:00:40 +0530[diff] [blame]64 select ARM_HAS_SG_CHAIN
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]65
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]66config ARCH_QSD8X50
67 bool "QSD8X50"
68 select ARCH_MSM_SCORPION
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]69 select MSM_VIC
70 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]71 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]72 select MSM_REMOTE_SPINLOCK_LDREX
73 select CPU_USE_DOMAINS
74 select EMULATE_DOMAIN_MANAGER_V7
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]75 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]76 select MSM_DALRPC
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]77 select MSM_PM2 if PM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]78 select MSM_MODEM_RESTART
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]79
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]80config ARCH_MSM8X60
81 bool "MSM8X60"
Jeff Ohlsteine14411d2010-11-30 13:06:36 -0800[diff] [blame]82 select ARCH_MSM_SCORPIONMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]83 select SMP_PARALLEL_START if SMP
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]84 select ARM_GIC
85 select CPU_V7
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]86 select MSM_REMOTE_SPINLOCK_LDREX
87 select ARCH_REQUIRE_GPIOLIB
88 select MSM_ADM3
89 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]90 select MSM_RPM_REGULATOR
David Brown1a5ab4b2011-05-16 15:53:38 -0700[diff] [blame]91 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]92 select MSM_PIL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]93 select ARCH_HAS_CPU_IDLE_WAIT
94 select MSM_DIRECT_SCLK_ACCESS
95 select MSM_RPM
96 select MSM_XO
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]97 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]98 select MSM_BUS_SCALING
99 select MSM_SECURE_IO
100 select MSM_DALRPC
101 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]102 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]103 select MSM_NATIVE_RESTART
104 select ARCH_INLINE_SPIN_TRYLOCK
105 select ARCH_INLINE_SPIN_TRYLOCK_BH
106 select ARCH_INLINE_SPIN_LOCK
107 select ARCH_INLINE_SPIN_LOCK_BH
108 select ARCH_INLINE_SPIN_LOCK_IRQ
109 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
110 select ARCH_INLINE_SPIN_UNLOCK
111 select ARCH_INLINE_SPIN_UNLOCK_BH
112 select ARCH_INLINE_SPIN_UNLOCK_IRQ
113 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
114 select ARCH_INLINE_READ_TRYLOCK
115 select ARCH_INLINE_READ_LOCK
116 select ARCH_INLINE_READ_LOCK_BH
117 select ARCH_INLINE_READ_LOCK_IRQ
118 select ARCH_INLINE_READ_LOCK_IRQSAVE
119 select ARCH_INLINE_READ_UNLOCK
120 select ARCH_INLINE_READ_UNLOCK_BH
121 select ARCH_INLINE_READ_UNLOCK_IRQ
122 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
123 select ARCH_INLINE_WRITE_TRYLOCK
124 select ARCH_INLINE_WRITE_LOCK
125 select ARCH_INLINE_WRITE_LOCK_BH
126 select ARCH_INLINE_WRITE_LOCK_IRQ
127 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
128 select ARCH_INLINE_WRITE_UNLOCK
129 select ARCH_INLINE_WRITE_UNLOCK_BH
130 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
131 select CPU_HAS_L2_PMU
132 select MSM_SPM_V1
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]133 select MSM_SCM if SMP
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]134 select MULTI_IRQ_HANDLER
Laura Abbott46505f62011-11-02 18:06:55 -0700[diff] [blame]135 select MSM_MULTIMEDIA_USE_ION
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]136 select MSM_PM8X60 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]137 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]138 select ARM_HAS_SG_CHAIN
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]139 select USE_DEV_CTRL_VOLUME
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]140
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]141config ARCH_MSM8960
142 bool "MSM8960"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]143 select ARCH_MSM_KRAITMP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]144 select ARM_GIC
145 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]146 select GPIO_MSM_V2
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]147 select MSM_GPIOMUX
148 select MSM_SCM if SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]149 select MSM_DIRECT_SCLK_ACCESS
150 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]151 select MSM_RPM_REGULATOR
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]152 select MSM_RPM
153 select MSM_XO
154 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]155 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]156 select MSM_PIL
157 select MSM_AUDIO_QDSP6 if SND_SOC
158 select CPU_HAS_L2_PMU
159 select MSM_SPM_V2
160 select MSM_L2_SPM
161 select MSM_NATIVE_RESTART
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]162 select DONT_MAP_HOLE_AFTER_MEMBANK0
163 select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]164 select ARCH_HAS_HOLES_MEMORYMODEL
Larry Basseld4d82c92011-12-07 09:52:49 -0800[diff] [blame]165 select CLEANCACHE
166 select QCACHE
Laura Abbott6d61a912011-10-27 16:44:14 -0700[diff] [blame]167 select MSM_MULTIMEDIA_USE_ION
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]168 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]169 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]170 select HOLES_IN_ZONE if SPARSEMEM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]171 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]172 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]173 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]174 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]175 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]176 select GENERIC_TIME_VSYSCALL
177 select USE_USER_ACCESSIBLE_TIMERS
178 select ARM_USE_USER_ACCESSIBLE_TIMERS
179 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]180 select MSM_CPU_PWRCTL
Priyanka Mathurdcaaaa9f2012-12-05 18:51:03 -0800[diff] [blame]181 select MSM_LPM_TEST
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]182
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]183config ARCH_MSM8930
184 bool "MSM8930"
185 select ARCH_MSM_KRAITMP
186 select ARM_GIC
187 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]188 select GPIO_MSM_V2
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]189 select MSM_GPIOMUX
190 select MSM_SCM if SMP
191 select MSM_DIRECT_SCLK_ACCESS
192 select REGULATOR
David Collins5779cea2012-01-05 15:09:21 -0800[diff] [blame]193 select MSM_RPM_REGULATOR
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]194 select MSM_RPM
195 select MSM_XO
196 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]197 select MSM_QDSP6_CODECS
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]198 select MSM_PIL
199 select MSM_AUDIO_QDSP6 if SND_SOC
200 select CPU_HAS_L2_PMU
201 select MSM_SPM_V2
202 select MSM_L2_SPM
203 select MSM_NATIVE_RESTART
204 select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]205 select MSM_REMOTE_SPINLOCK_SFPB
Larry Basself74479e2011-09-08 11:07:52 -0700[diff] [blame]206 select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]207 select MSM_ULTRASOUND_A
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]208 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]209 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]210 select HOLES_IN_ZONE if SPARSEMEM
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]211 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]212 select MSM_KRAIT_WFE_FIXUP
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]213 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]214 select GENERIC_TIME_VSYSCALL
215 select USE_USER_ACCESSIBLE_TIMERS
216 select ARM_USE_USER_ACCESSIBLE_TIMERS
217 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]218 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]219
220config ARCH_APQ8064
221 bool "APQ8064"
222 select ARCH_MSM_KRAITMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]223 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]224 select ARM_GIC
225 select CPU_V7
226 select MSM_SCM if SMP
Joel King4ebccc62011-07-22 09:43:22 -0700[diff] [blame]227 select MSM_GPIOMUX
Eric Holmberg40d21882011-09-27 09:42:03 -0600[diff] [blame]228 select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan47e5d932011-12-05 14:48:07 -0800[diff] [blame]229 select MSM_PIL
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]230 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]231 select MSM_QDSP6_CODECS
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]232 select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]233 select MULTI_IRQ_HANDLER
Praveen Chidambaram78499012011-11-01 17:15:17 -0600[diff] [blame]234 select MSM_RPM
235 select MSM_SPM_V2
236 select MSM_L2_SPM
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]237 select MSM_PM8X60 if PM
Neil Leeder814d3d32012-01-19 17:21:43 -0500[diff] [blame]238 select CPU_HAS_L2_PMU
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]239 select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel67b921d2012-04-06 10:23:27 -0700[diff] [blame]240 select CLEANCACHE
241 select QCACHE
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]242 select MIGHT_HAVE_PCI
243 select ARCH_SUPPORTS_MSI
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]244 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]245 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]246 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]247 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]248 select GENERIC_TIME_VSYSCALL
249 select USE_USER_ACCESSIBLE_TIMERS
250 select ARM_USE_USER_ACCESSIBLE_TIMERS
251 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]252 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]253
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]254config ARCH_MSM8974
255 bool "MSM8974"
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]256 select ARCH_MSM_KRAITMP
Sathish Ambley4149e842012-03-23 11:53:55 -0700[diff] [blame]257 select GPIO_MSM_V3
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]258 select ARM_GIC
259 select CPU_V7
260 select MSM_SCM if SMP
261 select MSM_GPIOMUX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]262 select MULTI_IRQ_HANDLER
Olav Hauganb800c8c2012-01-30 08:50:45 -0800[diff] [blame]263 select MSM_MULTIMEDIA_USE_ION
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]264 select MSM_PIL
Praveen Chidambaramaa9d52b2012-04-02 11:09:47 -0600[diff] [blame]265 select MSM_SPM_V2
266 select MSM_L2_SPM
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]267 select MSM_NATIVE_RESTART
268 select MSM_RESTART_V2
Praveen Chidambaram85b7b282012-04-16 13:45:15 -0600[diff] [blame]269 select MSM_PM8X60 if PM
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]270 select MAY_HAVE_SPARSE_IRQ
271 select SPARSE_IRQ
Mahesh Sivasubramaniancb668712012-04-04 13:03:25 -0600[diff] [blame]272 select MSM_RPM_SMD
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]273 select REGULATOR
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]274 select MSM_QDSP6_APRV2
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]275 select MSM_QDSP6V2_CODECS
276 select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins1c91ea72012-05-03 16:17:35 -0700[diff] [blame]277 select MSM_RPM_REGULATOR_SMD
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]278 select ARM_HAS_SG_CHAIN
Karthik Parsha404fb8f2012-07-30 19:14:05 -0700[diff] [blame]279 select MSM_RUN_QUEUE_STATS
Neeti Desai92eab922012-10-22 15:14:48 -0700[diff] [blame]280 select MEMORY_HOLE_CARVEOUT
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]281 select MSM_RPM_STATS_LOG
Karthikeyan Ramasubramanian1edce9e2012-11-08 18:26:10 -0700[diff] [blame]282 select QMI_ENCDEC
Neeti Desai1b2cb552012-11-01 21:57:36 -0700[diff] [blame]283 select DONT_MAP_HOLE_AFTER_MEMBANK0
Naveen Ramarajf56e9af2012-12-10 17:07:38 -0800[diff] [blame]284 select SENSORS_ADSP
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]285 select MSM_ULTRASOUND_B
Priyanka Mathur5d5b0a82013-01-17 10:54:29 -0800[diff] [blame]286 select MSM_LPM_TEST
Priyanka Mathur94abc462012-12-11 16:34:52 -0800[diff] [blame]287 select MSM_RPM_LOG
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]288
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]289config ARCH_MSMZINC
290 bool "MSMZINC"
291 select ARCH_MSM_KRAITMP
292 select GPIO_MSM_V3
293 select ARM_GIC
294 select CPU_V7
295 select MSM_SCM if SMP
296 select MSM_GPIOMUX
297 select MULTI_IRQ_HANDLER
298 select MSM_NATIVE_RESTART
299 select MSM_RESTART_V2
300 select MSM_PM8X60 if PM
301 select MAY_HAVE_SPARSE_IRQ
302 select SPARSE_IRQ
303 select REGULATOR
304 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko3a5ae972013-03-08 16:46:29 -0800[diff] [blame]305 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]306
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]307config ARCH_MPQ8092
308 bool "MPQ8092"
309 select ARCH_MSM_KRAITMP
310 select GPIO_MSM_V3
311 select ARM_GIC
312 select MULTI_IRQ_HANDLER
313 select CPU_V7
314 select MSM_GPIOMUX
315 select MAY_HAVE_SPARSE_IRQ
316 select SPARSE_IRQ
317 select MSM_NOPM
318
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]319config ARCH_FSM9XXX
320 bool "FSM9XXX"
321 select ARCH_MSM_SCORPION
322 select MSM_VIC
323 select CPU_V7
324 select MSM_REMOTE_SPINLOCK_LDREX
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]325 select GPIO_FSM9XXX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]326 select MULTI_IRQ_HANDLER
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]327 select MSM_DALRPC
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]328
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]329config ARCH_MSM9615
330 bool "MSM9615"
331 select ARM_GIC
Taniya Dasb241bd82012-03-19 17:58:06 +0530[diff] [blame]332 select GIC_SECURE
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]333 select ARCH_MSM_CORTEX_A5
334 select CPU_V7
Rohit Vaswani4307c842012-10-11 15:50:05 -0700[diff] [blame]335 select MIGHT_HAVE_CACHE_L2X0
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]336 select GPIO_MSM_V2
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]337 select MSM_GPIOMUX
Praveen Chidambaramab3b1c42011-08-25 08:44:05 -0600[diff] [blame]338 select MSM_RPM
Maheshkumar Sivasubramanian738b4582011-09-06 17:26:24 -0600[diff] [blame]339 select MSM_SPM_V2
Rohit Vaswanif688fa62011-10-13 18:13:10 -0700[diff] [blame]340 select MSM_NATIVE_RESTART
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]341 select REGULATOR
342 select MSM_RPM_REGULATOR
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]343 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]344 select MSM_PM8X60 if PM
Vikram Mulukutla2021c002011-12-16 12:32:59 -0800[diff] [blame]345 select MSM_XO
Olav Haugane6a0acd2012-04-05 09:29:12 -0700[diff] [blame]346 select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli9ec55e92012-01-09 14:44:59 -0800[diff] [blame]347 select MSM_QDSP6_APR
348 select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswaniead426f2012-01-05 20:24:52 -0800[diff] [blame]349 select FIQ
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]350 select ARM_HAS_SG_CHAIN
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]351
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]352config ARCH_MSM8625
353 bool "MSM8625"
354 select ARCH_MSM_CORTEX_A5
355 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]356 select GPIO_MSM_V1
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]357 select MSM_GPIOMUX
358 select ARM_GIC
359 select ARCH_MSM_CORTEXMP
360 select MULTI_IRQ_HANDLER
Trilok Soni3a453992012-03-06 18:46:22 +0530[diff] [blame]361 select ARM_TICKET_LOCKS
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]362 select MSM_RUN_QUEUE_STATS
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]363 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]364 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]365 select CPU_HAS_L2_PMU
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]366
367config ARCH_MSM9625
368 bool "MSM9625"
369 select ARM_GIC
Abhimanyu Kapur490d20c2012-06-22 17:34:20 -0700[diff] [blame]370 select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]371 select ARCH_MSM_CORTEX_A5
372 select SMP
373 select MSM_SMP
374 select CPU_V7
Abhimanyu Kapur4bb38622012-10-16 19:07:48 -0700[diff] [blame]375 select MSM_SCM if SMP
Jin Hong690e3352012-05-02 09:25:05 -0700[diff] [blame]376 select MSM_GPIOMUX
Girish Mahadevanf1c20a42012-09-19 11:44:36 -0600[diff] [blame]377 select MSM_RPM_SMD
Abhimanyu Kapur46e5e2b2012-10-02 20:45:37 -0700[diff] [blame]378 select MSM_NATIVE_RESTART
379 select MSM_RESTART_V2
Girish Mahadevan6e419562012-09-19 12:50:05 -0600[diff] [blame]380 select MSM_SPM_V2
381 select MSM_PM8X60 if PM
382 select MSM_SCM if SMP
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]383 select MULTI_IRQ_HANDLER
Rohit Vaswani61cf6ef2012-07-27 13:51:48 -0700[diff] [blame]384 select GPIO_MSM_V3
David Collins1cc6e402012-09-17 16:02:24 -0700[diff] [blame]385 select MAY_HAVE_SPARSE_IRQ
386 select SPARSE_IRQ
Mitchel Humpherys92e9b8a2012-10-08 18:12:47 -0700[diff] [blame]387 select MSM_MULTIMEDIA_USE_ION
Girish Mahadevane3be9302012-11-07 16:21:52 -0700[diff] [blame]388 select MSM_RPM_STATS_LOG
Venkat Sudhir0620e982012-11-15 16:04:36 -0800[diff] [blame]389 select MSM_QDSP6_APRV2
390 select MSM_QDSP6V2_CODECS
391 select MSM_AUDIO_QDSP6V2 if SND_SOC
Ashwin Chaugule8b459cc2012-11-26 15:20:54 -0500[diff] [blame]392 select CPU_HAS_L2_PMU
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]393 select MSM_JTAG_MM if CORESIGHT_ETM
Neeti Desai5f3b0312012-11-07 11:20:03 -0800[diff] [blame]394 select MEMORY_HOLE_CARVEOUT
Priyanka Mathurdc424552013-02-22 16:30:53 -0800[diff] [blame]395 select MSM_RPM_LOG
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]396
Syed Rameez Mustafa3971c142013-01-09 19:04:53 -0800[diff] [blame]397config ARCH_MSM8610
398 bool "MSM8610"
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]399 select ARM_GIC
400 select GIC_SECURE
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]401 select ARCH_MSM_CORTEXMP
402 select CPU_V7
403 select MSM_SCM if SMP
404 select MAY_HAVE_SPARSE_IRQ
405 select SPARSE_IRQ
406 select MULTI_IRQ_HANDLER
407 select GPIO_MSM_V3
408 select MSM_GPIOMUX
Hanumant Singhe4271312012-10-24 13:27:57 -0700[diff] [blame]409 select MSM_NATIVE_RESTART
410 select MSM_RESTART_V2
Arun Menon7d2f1732013-01-16 15:20:56 -0800[diff] [blame]411 select MSM_QDSP6_APRV2
412 select MSM_QDSP6V2_CODECS
413 select MSM_AUDIO_QDSP6V2 if SND_SOC
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]414 select QMI_ENCDEC
Praveen Chidambaramee7b1652012-11-29 09:52:53 -0700[diff] [blame]415 select MSM_RPM_SMD
416 select MSM_SPM_V2
417 select MSM_L2_SPM
418 select MSM_PM8X60 if PM
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]419 select MEMORY_HOLE_CARVEOUT
420 select DONT_MAP_HOLE_AFTER_MEMBANK0
421 select MSM_BUS_SCALING
Patrick Dalyd3ad9ff2012-11-06 11:07:27 -0800[diff] [blame]422 select CPU_FREQ_MSM
423 select CPU_FREQ
424 select CPU_FREQ_GOV_USERSPACE
425 select CPU_FREQ_GOV_ONDEMAND
Patrick Daly9e3fca92013-01-30 13:53:57 -0800[diff] [blame]426 select MSM_PIL
Siddharth Vermaead71842013-02-27 14:25:27 -0800[diff] [blame]427 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]428 select ARM_HAS_SG_CHAIN
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]429 select REGULATOR
430 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]431 select MSM_SPM_REGULATOR
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]432
433config ARCH_MSM8226
434 bool "MSM8226"
435 select ARM_GIC
436 select GIC_SECURE
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]437 select ARCH_MSM_CORTEXMP
438 select CPU_V7
439 select MSM_SCM if SMP
440 select MAY_HAVE_SPARSE_IRQ
441 select SPARSE_IRQ
442 select MULTI_IRQ_HANDLER
443 select GPIO_MSM_V3
444 select MSM_GPIOMUX
Syed Rameez Mustafaf1bdd712012-11-20 14:56:44 -0800[diff] [blame]445 select MSM_NATIVE_RESTART
446 select MSM_RESTART_V2
Bhalchandra Gajare4e08f632012-12-18 11:54:35 -0800[diff] [blame]447 select MSM_QDSP6_APRV2
448 select MSM_QDSP6V2_CODECS
449 select MSM_AUDIO_QDSP6V2 if SND_SOC
Karthikeyan Ramasubramaniand04c8652013-01-16 09:03:51 -0700[diff] [blame]450 select QMI_ENCDEC
Praveen Chidambarama06f60d2012-11-29 09:52:53 -0700[diff] [blame]451 select MSM_RPM_SMD
452 select MSM_SPM_V2
453 select MSM_L2_SPM
454 select MSM_PM8X60 if PM
Neeti Desaibfedbd32012-11-21 13:19:36 -0800[diff] [blame]455 select MEMORY_HOLE_CARVEOUT
456 select DONT_MAP_HOLE_AFTER_MEMBANK0
Gagan Mace1ec9522013-02-01 12:10:21 -0700[diff] [blame]457 select MSM_BUS_SCALING
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]458 select CPU_FREQ_MSM
459 select CPU_FREQ
460 select CPU_FREQ_GOV_USERSPACE
461 select CPU_FREQ_GOV_ONDEMAND
462 select MSM_PIL
463 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]464 select ARM_HAS_SG_CHAIN
David Keitelc0092e12013-03-07 12:09:48 -0800[diff] [blame]465 select REGULATOR
466 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]467 select MSM_SPM_REGULATOR
Pushkar Joshi1bea8372013-03-06 18:26:37 -0800[diff] [blame]468 select MSM_JTAG_MM if CORESIGHT_ETM
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]469endmenu
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]470
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]471choice
472 prompt "MSM SoC Revision"
473 default MSM_SOC_REV_NONE
474config MSM_SOC_REV_NONE
475 bool "N/A"
476 select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
477 select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]478config MSM_SOC_REV_A
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]479 bool "Rev. A"
480 select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]481endchoice
482
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]483config MSM_KRAIT_TBB_ABORT_HANDLER
484 bool "Krait TBB/TBH data abort handler"
485 depends on ARCH_MSM_KRAIT
486 depends on ARM_THUMB
487 help
488 Certain early samples of the Krait processor may generate data
489 aborts for TBB / TBH instructions that fail their condition code
490 checks. Enabling this option will ignore these erroneous data aborts,
491 at the expense of a very small performance penalty.
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800[diff] [blame]492
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]493 If unsure, say N.
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]494
495config ARCH_MSM_ARM11
496 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]497
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]498config ARCH_MSM_SCORPION
499 bool
500
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]501config ARCH_MSM_KRAIT
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]502 bool
Stephen Boyd51cabbe2011-12-02 13:28:56 -0800[diff] [blame]503 select ARM_L1_CACHE_SHIFT_6
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]504
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]505config MSM_SMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]506 select HAVE_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]507 bool
508
509config ARCH_MSM_SCORPIONMP
510 select ARCH_MSM_SCORPION
511 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]512 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]513 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]514 bool
515
516config ARCH_MSM_KRAITMP
517 select ARCH_MSM_KRAIT
518 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]519 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]520 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]521 bool
522
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]523config ARCH_MSM_CORTEXMP
524 select MSM_SMP
525 bool
526
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]527config MSM_KRAIT_WFE_FIXUP
528 bool
529
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]530config MSM_RESTART_V2
531 bool
532
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]533config ARCH_MSM_CORTEX_A5
Bryan Huntsman239ef1e2011-11-23 15:09:13 -0800[diff] [blame]534 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]535
536config ARCH_MSM7X27A
537 bool
538 select MSM_DALRPC
Justin Pauporeb3a33b72011-08-23 15:30:32 -0700[diff] [blame]539 select MSM_PROC_COMM_REGULATOR
Taniya Das86e0e132011-10-19 11:32:00 +0530[diff] [blame]540 select MULTI_IRQ_HANDLER
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]541 select ARM_GIC
542 select ARCH_MSM_CORTEXMP
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]543 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]544 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]545 select CPU_HAS_L2_PMU
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]546
Gregory Beanf9f3d312010-04-30 22:06:50 -0700[diff] [blame]547config MSM_VIC
548 bool
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]549
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]550config MSM_RPM
551 bool "Resource Power Manager"
552 select MSM_MPM
553
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]554config MSM_RPM_SMD
555 depends on MSM_SMD
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]556 select MSM_MPM_OF
557 bool "RPM driver using SMD protocol"
558 help
559 RPM is the dedicated hardware engine for managing shared SoC
560 resources. This config adds driver support for using SMD as a
561 transport layer communication with RPM hardware. It also selects
562 the MSM_MPM config that programs the MPM module to monitor interrupts
563 during sleep modes.
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]564
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]565config MSM_MPM
566 bool "Modem Power Manager"
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]567 help
568 MPM is a dedicated hardware resource responsible for entering and
569 waking up from a system wide low power mode. The MPM driver tracks
570 the wakeup interrupts and configures the MPM to monitor the wakeup
571 interrupts when going to a system wide sleep mode.
572
573config MSM_MPM_OF
574 bool "Modem Power Manager"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]575 depends on OF
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]576 help
577 MPM is a dedicated hardware resource responsible for entering and
578 waking up from a system wide low power mode. The MPM driver tracks
579 the wakeup interrupts and configures the MPM to monitor the wakeup
580 interrupts when going to a system wide sleep mode. This config option
581 enables the MPM driver that supports initialization from a device
582 tree
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]583
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]584config MSM_LPM_TEST
585 bool "Low Power Mode test framework"
Priyanka Mathur3abfd442013-01-11 12:58:51 -0800[diff] [blame]586 depends on MSM_RPM || MSM_RPM_SMD
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]587 depends on MSM_PM8X60
588 help
589 LPM_TEST is a test framework that assists in exercising the low
590 power mode algorithm on MSM targets. This test framework tracks
591 notifications sent during entry/exit of the low power modes and
592 processes them to measure various stats including latency
593 measurement.
594
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]595config MSM_XO
596 bool
597
598config MSM_REMOTE_SPINLOCK_DEKKERS
599 bool
600config MSM_REMOTE_SPINLOCK_SWP
601 bool
602config MSM_REMOTE_SPINLOCK_LDREX
603 bool
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]604config MSM_REMOTE_SPINLOCK_SFPB
605 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]606config MSM_ADM3
607 bool
608
609menu "MSM Board Selection"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]610
611config MACH_HALIBUT
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]612 depends on ARCH_MSM7X01A
613 depends on MSM_STACKED_MEMORY
614 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]615 bool "Halibut Board (QCT SURF7201A)"
616 help
617 Support for the Qualcomm SURF7201A eval board.
618
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]619config MACH_MSM7201A_SURF
620 depends on ARCH_MSM7X01A
621 depends on MSM_STACKED_MEMORY
622 default y
623 bool "MSM7201A SURF"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]624 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]625 Support for the Qualcomm MSM7201A SURF eval board.
626
627config MACH_MSM7201A_FFA
628 depends on ARCH_MSM7X01A
629 depends on MSM_STACKED_MEMORY
630 default y
631 bool "MSM7201A FFA"
632 help
633 Support for the Qualcomm MSM7201A FFA eval board.
634
635config MACH_TROUT
636 depends on ARCH_MSM7X01A
637 depends on MSM_STACKED_MEMORY
638 default y
639 bool "Trout"
640
641config MACH_MSM7X27_SURF
642 depends on ARCH_MSM7X27
643 depends on !MSM_STACKED_MEMORY
644 default y
645 bool "MSM7x27 SURF"
646 help
647 Support for the Qualcomm MSM7x27 SURF eval board.
648
649config MACH_MSM7X27_FFA
650 depends on ARCH_MSM7X27
651 depends on !MSM_STACKED_MEMORY
652 default y
653 bool "MSM7x27 FFA"
654 help
655 Support for the Qualcomm MSM7x27 FFA eval board.
656
657config MACH_MSM7X27A_RUMI3
658 depends on ARCH_MSM7X27A
659 depends on !MSM_STACKED_MEMORY
660 default y
661 bool "MSM7x27A RUMI3"
662 help
663 Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
664
665config MACH_MSM7X27A_SURF
666 depends on ARCH_MSM7X27A
667 depends on !MSM_STACKED_MEMORY
668 default y
669 bool "MSM7x27A SURF"
670 help
671 Support for the Qualcomm MSM7x27A SURF.
672
673config MACH_MSM7X27A_FFA
674 depends on ARCH_MSM7X27A
675 depends on !MSM_STACKED_MEMORY
676 default y
677 bool "MSM7x27A FFA"
678 help
679 Support for the Qualcomm MSM7x27A FFA.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]680
Trilok Soni3d0f6c52011-07-26 16:06:58 +0530[diff] [blame]681config MACH_MSM7625A_SURF
682 depends on ARCH_MSM7X27A
683 depends on !MSM_STACKED_MEMORY
684 default y
685 bool "MSM7625A SURF"
686 help
687 Support for the Qualcomm MSM7625A SURF.
688
689config MACH_MSM7625A_FFA
690 depends on ARCH_MSM7X27A
691 depends on !MSM_STACKED_MEMORY
692 default y
693 bool "MSM7625A FFA"
694 help
695 Support for the Qualcomm MSM7625A FFA.
696
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]697config MACH_MSM7627A_QRD1
698 depends on ARCH_MSM7X27A
699 depends on !MSM_STACKED_MEMORY
700 default y
701 bool "MSM7627A QRD1"
702 help
Chintan Pandyab1bad0e2012-02-06 19:04:51 +0530[diff] [blame]703 Support for the Qualcomm MSM7627A Reference Design.
704
705config MACH_MSM7627A_QRD3
706 depends on ARCH_MSM7X27A
707 depends on !MSM_STACKED_MEMORY
708 default y
709 bool "MSM7627A QRD3"
710 help
711 Support for the Qualcomm MSM7627A Reference Design.
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]712
Taniya Dasc868a2e2012-01-03 10:18:47 +0530[diff] [blame]713config MACH_MSM7627A_EVB
714 depends on ARCH_MSM7X27A
715 depends on !MSM_STACKED_MEMORY
716 default y
717 bool "MSM7627A EVB"
718 help
719 Support for the Qualcomm MSM7627A Reference Design.
720
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]721config MACH_MSM8625_RUMI3
722 depends on ARCH_MSM8625
723 depends on !MSM_STACKED_MEMORY
724 default y
725 bool "MSM8625 RUMI3"
726 help
727 Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
728
Taniya Dase3027e22012-02-27 16:32:27 +0530[diff] [blame]729config MACH_MSM8625_SURF
730 depends on ARCH_MSM8625
731 depends on !MSM_STACKED_MEMORY
732 default y
733 bool "MSM8625 SURF"
734 help
735 Support for the Qualcomm MSM8625 SURF.
736
Aparna Mallavarapu9f000a72012-04-20 15:37:57 +0530[diff] [blame]737config MACH_MSM8625_FFA
738 depends on ARCH_MSM8625
739 depends on !MSM_STACKED_MEMORY
740 default y
741 bool "MSM8625 FFA"
742 help
743 Support for the Qualcomm MSM8625 FFA.
744
Chintan Pandyaf4ad4002012-02-28 19:49:03 +0530[diff] [blame]745config MACH_MSM8625_EVB
746 depends on ARCH_MSM8625
747 depends on !MSM_STACKED_MEMORY
748 default y
749 bool "MSM8625 EVB"
750 help
751 Support for the Qualcomm MSM8625 Reference Design.
752
Taniya Dasbd096542012-03-15 17:43:45 +0530[diff] [blame]753config MACH_MSM8625_QRD7
754 depends on ARCH_MSM8625
755 depends on !MSM_STACKED_MEMORY
756 default y
757 bool "MSM8625 QRD7"
758 help
759 Support for the Qualcomm MSM8625 Reference Design.
760
Aparna Mallavarapu5a326242012-05-09 19:49:02 +0530[diff] [blame]761config MACH_MSM8625_EVT
762 depends on ARCH_MSM8625
763 depends on !MSM_STACKED_MEMORY
764 default y
765 bool "MSM8625 EVT"
766 help
767 Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]768
Channagoud Kadabi2bd65c82012-10-12 15:14:23 +0530[diff] [blame]769config MACH_QRD_SKUD_PRIME
770 depends on ARCH_MSM8625
771 depends on !MSM_STACKED_MEMORY
772 default y
773 bool "MSM8625 SKUD PRIME"
774 help
775 Support for the Qualcomm MSM8625 SKUD prime Reference Design.
776 Add support for a SKUD prime reference design based on MSM8x25
777 chipset. This device is much closer to a phone than regular form
778 factor devices, with new touch, display panel and other hardware
779 configurations.
780
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]781config MACH_MSM7X30_SURF
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]782 depends on ARCH_MSM7X30
783 depends on !MSM_STACKED_MEMORY
784 default y
785 bool "MSM7x30 SURF"
786 help
787 Support for the Qualcomm MSM7x30 SURF eval board.
788
789config MACH_MSM7X30_FFA
790 depends on ARCH_MSM7X30
791 depends on !MSM_STACKED_MEMORY
792 default y
793 bool "MSM7x30 FFA"
794 help
795 Support for the Qualcomm MSM7x30 FFA eval board.
796
797config MACH_MSM7X30_FLUID
798 depends on ARCH_MSM7X30
799 depends on !MSM_STACKED_MEMORY
800 default y
801 bool "MSM7x30 FLUID"
802 help
803 Support for the Qualcomm MSM7x30 FLUID eval board.
804
805config MACH_SAPPHIRE
806 depends on ARCH_MSM7X01A
807 default n
808 bool "Sapphire"
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]809
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]810config MACH_QSD8X50_SURF
811 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]812 depends on MSM_SOC_REV_NONE
813 depends on MSM_STACKED_MEMORY
814 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]815 bool "QSD8x50 SURF"
816 help
817 Support for the Qualcomm QSD8x50 SURF eval board.
818
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]819config MACH_QSD8X50_FFA
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]820 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]821 depends on MSM_SOC_REV_NONE
822 depends on MSM_STACKED_MEMORY
823 default y
824 bool "QSD8x50 FFA"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]825 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]826 Support for the Qualcomm QSD8x50 FFA eval board.
827
828config MACH_MSM7X25_SURF
829 depends on ARCH_MSM7X25
830 depends on !MSM_STACKED_MEMORY
831 default y
832 bool "MSM7x25 SURF"
833 help
834 Support for the Qualcomm MSM7x25 SURF eval board.
835
836config MACH_MSM7X25_FFA
837 depends on ARCH_MSM7X25
838 depends on !MSM_STACKED_MEMORY
839 default y
840 bool "MSM7x25 FFA"
841 help
842 Support for the Qualcomm MSM7x25 FFA eval board.
843
844config MACH_MSM8X55_SURF
845 depends on ARCH_MSM7X30
846 depends on !MSM_STACKED_MEMORY
847 default y
848 bool "MSM8X55 SURF"
849 help
850 Support for the Qualcomm MSM8x55 SURF eval board.
851
852config MACH_MSM8X55_FFA
853 depends on ARCH_MSM7X30
854 depends on !MSM_STACKED_MEMORY
855 default y
856 bool "MSM8X55 FFA"
857 help
858 Support for the Qualcomm MSM8x55 FFA eval board.
859
860config MACH_MSM8X55_SVLTE_FFA
861 depends on ARCH_MSM7X30
862 depends on !MSM_STACKED_MEMORY
863 default y
864 bool "MSM8X55 SVLTE FFA"
865 help
866 Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
867
868config MACH_MSM8X55_SVLTE_SURF
869 depends on ARCH_MSM7X30
870 depends on !MSM_STACKED_MEMORY
871 default y
872 bool "MSM8X55 SVLTE SURF"
873 help
874 Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]875
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]876config MACH_MSM8X60_SURF
877 depends on ARCH_MSM8X60
878 default n
879 bool "MSM8x60 SURF"
880 help
881 Support for the Qualcomm MSM8x60 SURF eval board.
882
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]883config MACH_MSM8X60_FFA
884 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]885 default n
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]886 bool "MSM8x60 FFA"
887 help
888 Support for the Qualcomm MSM8x60 FFA eval board.
889
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]890config MACH_MSM8X60_FLUID
891 depends on ARCH_MSM8X60
892 default n
893 bool "MSM8x60 FLUID"
894 help
895 Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
896 8x60 target which has a form factor that is much closer to that
897 of a phone than other targets. It also has a new display and
898 touchscreen controller.
899
900config MACH_MSM8X60_FUSION
901 depends on ARCH_MSM8X60
902 default n
903 bool "MSM8x60 FUSION"
904 help
905 Support for the Qualcomm MSM8x60 Fusion SURF device.
906
907config MACH_MSM8X60_FUSN_FFA
908 depends on ARCH_MSM8X60
909 default n
910 bool "MSM8x60 FUSN FFA"
911 help
912 Support for the Qualcomm MSM8x60 Fusion FFA device.
913
Zhang Chang Kenef05b172011-07-27 15:28:13 -0400[diff] [blame]914config MACH_MSM8X60_DRAGON
915 depends on ARCH_MSM8X60
916 default n
917 bool "MSM8x60 DRAGON"
918 help
919 Support for the Qualcomm MSM8x60 Dragon board.
920
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]921config MACH_MSM8960_CDP
922 depends on ARCH_MSM8960
923 bool "MSM8960 CDP"
924 help
925 Support for the Qualcomm MSM8960 CDP device.
926
927config MACH_MSM8960_MTP
928 depends on ARCH_MSM8960
929 bool "MSM8960 MTP"
930 help
931 Support for the Qualcomm MSM8960 MTP device.
932
933config MACH_MSM8960_FLUID
934 depends on ARCH_MSM8960
935 bool "MSM8960 FLUID"
936 help
937 Support for the Qualcomm MSM8960 FLUID device.
938
Amir Samuelov0d1f8ae2011-07-28 11:13:58 +0300[diff] [blame]939config MACH_MSM8960_LIQUID
940 depends on ARCH_MSM8960
941 bool "MSM8960 LIQUID"
942 help
943 Support for the Qualcomm MSM8960 LIQUID device.
944
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]945config MACH_MSM8930_CDP
946 depends on ARCH_MSM8930
947 bool "MSM8930 CDP"
948 help
949 Support for the Qualcomm MSM8930 CDP device.
950
951config MACH_MSM8930_MTP
952 depends on ARCH_MSM8930
953 bool "MSM8930 MTP"
954 help
955 Support for the Qualcomm MSM8930 MTP device.
956
957config MACH_MSM8930_FLUID
958 depends on ARCH_MSM8930
959 bool "MSM8930 FLUID"
960 help
961 Support for the Qualcomm MSM8930 FLUID device.
962
Stepan Moskovchenko8768eff2011-12-01 18:55:07 -0800[diff] [blame]963config MACH_MSM8627_CDP
964 depends on ARCH_MSM8930
965 bool "MSM8627 CDP"
966 help
967 Support for the Qualcomm MSM8627 CDP device.
968
969config MACH_MSM8627_MTP
970 depends on ARCH_MSM8930
971 bool "MSM8627 MTP"
972 help
973 Support for the Qualcomm MSM8627 MTP device.
974
Rohit Vaswania8e7a832011-09-28 21:00:05 -0700[diff] [blame]975config MACH_MSM9615_CDP
976 depends on ARCH_MSM9615
977 bool "MSM9615 CDP"
978 help
979 Support for the Qualcomm MSM9615 CDP device.
980
981config MACH_MSM9615_MTP
982 depends on ARCH_MSM9615
983 bool "MSM9615 MTP"
984 help
985 Support for the Qualcomm MSM9615 MTP device.
986
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]987config MSM_USE_TSIF1
988 depends on ARCH_MSM8X60
989 bool "MSM8x60 use TSIF1"
990 help
991 Selects TSIF1 core to be used rather than TSIF0.
992 The two TSIF cores share the same DM configuration
993 so they cannot be used simultaneously.
994
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]995config MACH_APQ8064_CDP
996 depends on ARCH_APQ8064
997 bool "APQ8064 CDP"
998 help
999 Support for the Qualcomm APQ8064 CDP device.
1000
Rohit Vaswani4375c802013-01-09 13:38:19 -0800[diff] [blame]1001config MACH_FSM8064_EP
1002 depends on ARCH_APQ8064
1003 bool "FSM8064 EP"
1004 help
1005 Support for the Qualcomm FSM8064 EP device.
1006 This board also known as Femto development platform (FDP)
1007 is based on APQ8064 chipset. This board does not support
1008 keyboard, display or multimedia.
1009
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1010config MACH_APQ8064_MTP
1011 depends on ARCH_APQ8064
1012 bool "APQ8064 MTP"
1013 help
1014 Support for the Qualcomm APQ8064 MTP device.
1015
1016config MACH_APQ8064_LIQUID
1017 depends on ARCH_APQ8064
1018 bool "APQ8064 LIQUID"
1019 help
1020 Support for the Qualcomm APQ8064 LIQUID device.
1021
Joel King064bbf82012-04-01 13:23:39 -0700[diff] [blame]1022config MACH_MPQ8064_CDP
1023 depends on ARCH_APQ8064
1024 bool "MPQ8064 CDP"
1025 help
1026 Support for the Qualcomm MPQ8064 CDP device.
1027
Joel King11ca8202012-02-13 16:19:03 -0800[diff] [blame]1028config MACH_MPQ8064_HRD
1029 depends on ARCH_APQ8064
1030 bool "MPQ8064 HRD"
1031 help
1032 Support for the Qualcomm MPQ8064 HRD device.
1033
1034config MACH_MPQ8064_DTV
1035 depends on ARCH_APQ8064
1036 bool "MPQ8064 DTV"
1037 help
1038 Support for the Qualcomm MPQ8064 DTV device.
1039
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1040config MACH_FSM9XXX_SURF
1041 depends on ARCH_FSM9XXX
1042 depends on !MSM_STACKED_MEMORY
1043 default y
1044 bool "FSM9XXX SURF"
1045 help
1046 Support for the Qualcomm FSM9xxx femtocell
1047 chipset based SURF evaluation board and
1048 FFA board.
1049
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]1050endmenu
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1051
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1052config MSM_STACKED_MEMORY
1053 bool "Stacked Memory"
1054 default y
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1055 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1056 This option is used to indicate the presence of on-die stacked
1057 memory. When present this memory bank is used for a high speed
1058 shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1059
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1060config PHYS_OFFSET
1061 hex
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]1062 default "0x40800000" if ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1063 default "0x80200000" if ARCH_APQ8064
1064 default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]1065 default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1066 default "0x00000000" if ARCH_MSM8974
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]1067 default "0x00000000" if ARCH_MSMZINC
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1068 default "0x00000000" if ARCH_MPQ8092
Syed Rameez Mustafa1c99fd32013-03-05 22:11:17 -0800[diff] [blame]1069 default "0x00000000" if ARCH_MSM8226
1070 default "0x00000000" if ARCH_MSM8610
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1071 default "0x10000000" if ARCH_FSM9XXX
Abhimanyu Kapur20ac2ad2012-09-25 04:23:59 -0700[diff] [blame]1072 default "0x00200000" if ARCH_MSM9625
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1073 default "0x00200000" if !MSM_STACKED_MEMORY
1074 default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
1075 default "0x20000000" if ARCH_QSD8X50
1076 default "0x40200000" if ARCH_MSM8X60
1077 default "0x10000000"
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1078
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1079config KERNEL_MSM_CONTIG_MEM_REGION
1080 bool "Enable in-kernel contiguous memory region"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1081 default y if ARCH_MSM8X60
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1082 depends on ANDROID_PMEM && (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1083 help
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1084 Enable the in-kernel contiguous memory allocator. Sets up a
1085 region of physically contiguous memory. This memory is
1086 reserved during initialization, and can be used
1087 generically.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1088
1089config KERNEL_PMEM_SMI_REGION
1090 bool "Enable in-kernel PMEM region for SMI"
1091 default y if ARCH_MSM8X60
1092 depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM))
1093 help
1094 Enable the in-kernel PMEM allocator to use SMI memory.
1095
1096config PMEM_GPU0
1097 bool "Enable PMEM GPU0 region"
1098 default y
1099 depends on ARCH_QSD8X50 && ANDROID_PMEM
1100 help
1101 Enable the PMEM GPU0 device on SMI Memory.
1102
1103config MSM_AMSS_VERSION
1104 int
1105 default 6210 if MSM_AMSS_VERSION_6210
1106 default 6220 if MSM_AMSS_VERSION_6220
1107 default 6225 if MSM_AMSS_VERSION_6225
1108
1109choice
1110 prompt "AMSS modem firmware version"
1111
1112 default MSM_AMSS_VERSION_6225
1113
1114 config MSM_AMSS_VERSION_6210
1115 bool "6.2.10"
1116
1117 config MSM_AMSS_VERSION_6220
1118 bool "6.2.20"
1119
1120 config MSM_AMSS_VERSION_6225
1121 bool "6.2.20 + New ADSP"
1122endchoice
Stepan Moskovchenko2607b0a2010-11-15 17:46:10 -0800[diff] [blame]1123
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1124config MSM_HAS_DEBUG_UART_HS
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]1125 bool
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1126 help
1127 Say Y here if high speed MSM UART is present.
1128
1129config MSM_HAS_DEBUG_UART_HS_V14
1130 bool
1131 select MSM_HAS_DEBUG_UART_HS
1132 help
1133 Say Y here if high speed MSM UART v1.4 is present.
1134
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1135config MSM_DEBUG_UART_PHYS
1136 hex
1137 default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
1138 default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
1139 default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
1140 default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
1141 default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
1142 default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
1143 default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
1144 default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
1145
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1146choice
1147 prompt "Debug UART"
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1148 depends on DEBUG_LL
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1149
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1150 config DEBUG_MSM_UART1
1151 bool "Kernel low-level debugging messages via MSM UART1"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1152 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1153 help
1154 Say Y here if you want the debug print routines to direct
1155 their output to the first serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1156
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1157 config DEBUG_MSM_UART2
1158 bool "Kernel low-level debugging messages via MSM UART2"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1159 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1160 help
1161 Say Y here if you want the debug print routines to direct
1162 their output to the second serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1163
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1164 config DEBUG_MSM_UART3
1165 bool "Kernel low-level debugging messages via MSM UART3"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1166 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1167 help
1168 Say Y here if you want the debug print routines to direct
1169 their output to the third serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1170
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1171 config DEBUG_MSM8660_UART
1172 bool "Kernel low-level debugging messages via MSM 8660 UART"
1173 depends on ARCH_MSM8X60
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1174 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1175 help
1176 Say Y here if you want the debug print routines to direct
1177 their output to the serial port on MSM 8660 devices.
Steve Mucklec8aabae2010-04-21 16:20:27 -0700[diff] [blame]1178
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1179 config DEBUG_MSM8960_UART
1180 bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1181 depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1182 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1183 help
1184 Say Y here if you want the debug print routines to direct
1185 their output to the serial port on MSM 8960 devices.
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1186
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1187 config DEBUG_MSM8930_UART
1188 bool "Kernel low-level debugging messages via MSM 8930 UART"
1189 depends on ARCH_MSM8930 && DEBUG_LL
1190 select MSM_HAS_DEBUG_UART_HS
1191 help
1192 Say Y here if you want the debug print routines to direct
1193 their output to the serial port on MSM 8930 devices.
1194
1195 config DEBUG_APQ8064_UART
1196 bool "Kernel low-level debugging messages via APQ 8064 UART"
1197 depends on ARCH_APQ8064 && DEBUG_LL
1198 select MSM_HAS_DEBUG_UART_HS
1199 help
1200 Say Y here if you want the debug print routines to direct
1201 their output to the serial port on APQ 8064 devices.
1202
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1203 config DEBUG_MSM8974_UART
1204 bool "Kernel low-level debugging messages via MSM 8974 UART"
1205 depends on ARCH_MSM8974
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1206 select MSM_HAS_DEBUG_UART_HS_V14
1207 help
1208 Say Y here if you want the debug print routines to direct
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1209 their output to the serial port on MSM 8974 devices.
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1210
1211 config DEBUG_MPQ8092_UART
1212 bool "Kernel low-level debugging messages via MPQ8092 UART"
1213 depends on ARCH_MPQ8092
1214 select MSM_HAS_DEBUG_UART_HS_V14
1215 help
1216 Say Y here if you want the debug print routines to direct
1217 their output to the serial port on MPQ8092 devices.
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1218
1219 config DEBUG_MSMZINC_UART
1220 bool "Kernel low-level debugging messages via MSMZINC UART"
1221 depends on ARCH_MSMZINC
1222 select MSM_HAS_DEBUG_UART_HS_V14
1223 help
1224 Say Y here if you want the debug print routines to direct
1225 their output to the serial port on MSMZINC devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1226endchoice
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1227
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1228choice
1229 prompt "Default Timer"
1230 default MSM7X00A_USE_GP_TIMER
1231
1232 config MSM7X00A_USE_GP_TIMER
1233 bool "GP Timer"
1234 help
1235 Low resolution timer that allows power collapse from idle.
1236
1237 config MSM7X00A_USE_DG_TIMER
1238 bool "DG Timer"
1239 help
1240 High resolution timer.
1241endchoice
1242
1243choice
1244 prompt "Suspend sleep mode"
1245 default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1246 help
1247 Allows overriding the sleep mode used. Leave at power
1248 collapse suspend unless the arm9 image has problems.
1249
1250 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1251 bool "Power collapse suspend"
1252 help
1253 Lowest sleep state. Returns through reset vector.
1254
1255 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1256 bool "Power collapse"
1257 help
1258 Sleep state that returns through reset vector.
1259
1260 config MSM7X00A_SLEEP_MODE_APPS_SLEEP
1261 bool "Apps Sleep"
1262
1263 config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1264 bool "Ramp down cpu clock and wait for interrupt"
1265
1266 config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1267 bool "Wait for interrupt"
1268endchoice
1269
1270config MSM7X00A_SLEEP_MODE
1271 int
1272 default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1273 default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1274 default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
1275 default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1276 default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1277
1278choice
1279 prompt "Idle sleep mode"
1280 default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1281 help
1282 Allows overriding the sleep mode used from idle. Leave at power
1283 collapse suspend unless the arm9 image has problems.
1284
1285 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1286 bool "Power collapse suspend"
1287 help
1288 Lowest sleep state. Returns through reset vector.
1289
1290 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1291 bool "Power collapse"
1292 help
1293 Sleep state that returns through reset vector.
1294
1295 config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1296 bool "Apps Sleep"
1297
1298 config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1299 bool "Ramp down cpu clock and wait for interrupt"
1300
1301 config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1302 bool "Wait for interrupt"
1303endchoice
1304
1305config MSM7X00A_IDLE_SLEEP_MODE
1306 int
1307 default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1308 default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1309 default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1310 default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1311 default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1312
1313config MSM7X00A_IDLE_SLEEP_MIN_TIME
1314 int "Minimum idle time before sleep"
1315 default 20000000
1316 help
1317 Minimum idle time in nanoseconds before entering low power mode.
1318
1319config MSM7X00A_IDLE_SPIN_TIME
1320 int "Idle spin time before cpu ramp down"
1321 default 80000
1322 help
1323 Spin time in nanoseconds before ramping down cpu clock and entering
1324 any low power state.
1325
1326menuconfig MSM_IDLE_STATS
1327 bool "Collect idle statistics"
1328 default y
1329 help
1330 Collect idle statistics and export them in proc/msm_pm_stats.
1331
1332if MSM_IDLE_STATS
1333
1334config MSM_IDLE_STATS_FIRST_BUCKET
1335 int "First bucket time"
1336 default 62500
1337 help
1338 Upper time limit in nanoseconds of first bucket.
1339
1340config MSM_IDLE_STATS_BUCKET_SHIFT
1341 int "Bucket shift"
1342 default 2
1343
1344config MSM_IDLE_STATS_BUCKET_COUNT
1345 int "Bucket count"
1346 default 10
1347
1348config MSM_SUSPEND_STATS_FIRST_BUCKET
1349 int "First bucket time for suspend"
1350 default 1000000000
1351 help
1352 Upper time limit in nanoseconds of first bucket of the
1353 histogram. This is for collecting statistics on suspend.
1354
1355endif # MSM_IDLE_STATS
1356
1357config CPU_HAS_L2_PMU
1358 bool "L2CC PMU Support"
1359 help
1360 Select this if the L2 cache controller has a Performance Monitoring Unit.
1361
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1362config HTC_HEADSET
1363 tristate "HTC 2 Wire detection driver"
1364 default n
1365 help
1366 Provides support for detecting HTC 2 wire devices, such as wired
1367 headset, on the trout platform. Can be used with the msm serial
1368 debugger, but not with serial console.
1369
1370config TROUT_BATTCHG
1371 depends on MACH_TROUT && POWER_SUPPLY
1372 default y
1373 bool "Trout battery / charger driver"
1374
1375config HTC_PWRSINK
1376 depends on MSM_SMD
1377 default n
1378 bool "HTC Power Sink Driver"
1379
1380config QSD_SVS
1381 bool "QSD Static Voltage Scaling"
1382 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1383 default y
1384 select TPS65023
1385 help
1386 Enables static voltage scaling using the TPS65023 PMIC.
1387
1388config QSD_PMIC_DEFAULT_DCDC1
1389 int "PMIC default output voltage"
1390 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1391 default 1250
1392 help
1393 This is the PMIC voltage at Linux kernel boot.
1394
1395config MSM_FIQ_SUPPORT
1396 default y
1397 bool "Enable installation of an FIQ handler."
1398
1399config MSM_SERIAL_DEBUGGER
1400 select MSM_FIQ_SUPPORT
1401 select KERNEL_DEBUGGER_CORE
1402 default n
1403 bool "FIQ Mode Serial Debugger"
1404 help
1405 The FIQ serial debugger can accept commands even when the
1406 kernel is unresponsive due to being stuck with interrupts
1407 disabled. Depends on the kernel debugger core in drivers/misc.
1408
1409config MSM_SERIAL_DEBUGGER_CONSOLE
1410 depends on MSM_SERIAL_DEBUGGER
1411 default n
1412 bool "Console on FIQ Serial Debugger port"
1413 help
1414 Enables a console so that printk messages are displayed on
1415 the debugger serial port as the occur.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1416
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1417config MSM_PROC_COMM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1418 default y
1419 bool "Proc-Comm RPC Interface"
1420 help
1421 Enables a lightweight communications interface to the
1422 baseband processor.
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1423
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1424config MSM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1425 bool "MSM Shared Memory Driver (SMD)"
1426 help
1427 Support for the shared memory interface between the apps
1428 processor and the baseband processor. Provides access to
1429 the "shared heap", as well as virtual serial channels
1430 used to communicate with various services on the baseband
1431 processor.
1432
1433choice
1434 prompt "MSM Shared memory interface version"
1435 depends on MSM_SMD
1436 default MSM_SMD_PKG3 if ARCH_MSM_ARM11
1437 default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
1438
1439 config MSM_SMD_PKG3
1440 bool
1441 prompt "Package 3"
1442
1443 config MSM_SMD_PKG4
1444 bool
1445 prompt "Package 4"
1446endchoice
1447
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]1448config MSM_PCIE
1449 bool "MSM PCIe Controller driver"
1450 depends on PCI && PCI_MSI
1451 help
1452 Enables the PCIe functionality by configures PCIe core on
1453 MSM chipset and by enabling the ARM PCI framework extension.
1454
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1455config MSM_RPC_SDIO_XPRT
1456 depends on MSM_SDIO_AL
1457 default y
1458 bool "MSM SDIO XPRT Layer"
1459 help
1460 SDIO Transport Layer for RPC Rouer
1461
1462config MSM_RPC_SDIO_DEBUG
1463 depends on MSM_RPC_SDIO_XPRT
1464 default y
1465 bool "MSM SDIO XPRT debug support"
1466 help
1467 Support for debugging SDIO XPRT
1468
1469config MSM_SMD_DEBUG
1470 depends on MSM_SMD
1471 default y
1472 bool "MSM SMD debug support"
1473 help
1474 Support for debugging the SMD for communication
1475 between the ARM9 and ARM11
1476
1477config MSM_SDIO_AL
1478 depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
1479 default y
1480 tristate "SDIO-Abstraction-Layer"
1481 help
1482 Support MSM<->MDM Communication over SDIO bus.
1483 MDM SDIO-Client should have pipes support.
1484
1485config MSM_SDIO_DMUX
1486 bool "SDIO Data Mux Driver"
1487 depends on MSM_SDIO_AL
1488 default n
1489 help
1490 Support Muxed Data Channels over SDIO interface.
1491
1492config MSM_BAM_DMUX
1493 bool "BAM Data Mux Driver"
1494 depends on SPS
1495 default n
1496 help
1497 Support Muxed Data Channels over BAM interface.
1498 BAM has a limited number of pipes. This driver
1499 provides a means to support more logical channels
1500 via muxing than BAM could without muxing.
1501
1502config MSM_N_WAY_SMD
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1503 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1504 default y
1505 bool "MSM N-WAY SMD support"
1506 help
1507 Supports APPS-QDSP SMD communication along with
1508 normal APPS-MODEM SMD communication.
1509
1510config MSM_N_WAY_SMSM
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1511 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1512 default y
1513 bool "MSM N-WAY SMSM support"
1514 help
1515 Supports APPS-QDSP SMSM communication along with
1516 normal APPS-MODEM SMSM communication.
1517
Eric Holmberg6275b602012-11-19 13:05:04 -0700[diff] [blame]1518config MSM_SMP2P
1519 bool "SMSM Point-to-Point (SMP2P)"
1520 depends on MSM_SMD
1521 help
1522 Provide point-to-point remote signaling support.
1523 SMP2P enables transferring 32-bit values between
1524 the local and a remote system using shared
1525 memory and interrupts. A client can open multiple
1526 32-bit values by specifying a unique string and
1527 remote processor ID.
1528
1529config MSM_SMP2P_TEST
1530 bool "SMSM Point-to-Point Test"
1531 depends on MSM_SMP2P
1532 help
1533 Enables loopback and unit testing support for
1534 SMP2P. Loopback support is used by other
1535 processors to do unit testing. Unit tests
1536 are used to verify the local and remote
1537 implementations.
1538
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1539config MSM_RESET_MODEM
1540 tristate "Reset Modem Driver"
1541 depends on MSM_SMD
1542 default m
1543 help
1544 Allows the user to reset the modem through a device node.
1545
1546config MSM_SMD_LOGGING
1547 depends on MSM_SMD
1548 default y
1549 bool "MSM Shared Memory Logger"
1550 help
1551 This option exposes the shared memory logger at /dev/smem_log
1552 and a debugfs node named smem_log.
1553
1554 If in doubt, say yes.
1555
Karthikeyan Ramasubramaniane1f4f732011-08-08 13:34:47 -0600[diff] [blame]1556config MSM_IPC_LOGGING
1557 bool "MSM Debug Logging for IPC Drivers"
1558 help
1559 This option allows the debug logging for IPC Drivers.
1560
1561 If in doubt, say no.
1562
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1563config MSM_SMD_NMEA
1564 bool "NMEA GPS Driver"
1565 depends on MSM_SMD
1566 default y
1567 help
1568 Enable this to support the NMEA GPS device.
1569
1570 If in doubt, say yes.
1571
1572config MSM_SDIO_TTY
1573 bool "SDIO TTY Driver"
1574 depends on MSM_SDIO_AL
1575 default n
1576 help
1577 Provides a TTY driver SDIO TTY
1578 This driver can be used by user space
1579 applications for passing data through the
1580 SDIO interface.
1581
1582config MSM_SMD_TTY
1583 bool "SMD TTY Driver"
1584 depends on MSM_SMD
1585 default y
1586 help
1587 Provides TTY interfaces to interact with the modem.
1588
1589 If in doubt, say yes.
1590
1591config MSM_SMD_QMI
1592 bool "SMD QMI Driver"
1593 depends on MSM_SMD
1594 default y
1595 help
1596 Manages network data connections.
1597
1598 If in doubt, say yes.
1599
1600config MSM_SMD_PKT
1601 bool "SMD Packet Driver"
1602 depends on MSM_SMD
1603 default y
1604 help
1605 Provides a binary SMD non-muxed packet port interface.
1606
1607 If in doubt, say yes.
1608
1609config MSM_SDIO_CMUX
1610 bool "SDIO CMUX Driver"
1611 depends on MSM_SDIO_AL
1612 default n
1613 help
1614 Provides a Muxed port interface over SDIO QMI
1615
1616config MSM_DSPS
1617 bool "Sensors DSPS driver"
1618 depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
1619 default n
1620 help
1621 Provides user-space interface to the sensors manager
1622 to turn on/off the Sensors Processor system clocks.
1623 It is the DSPS responsibility to turn on/off the sensors
1624 themself.
1625 The number of clocks and their name may vary between targets.
1626 It also triggers the PIL to load the DSPS firmware.
1627
1628config MSM_SDIO_CTL
1629 bool "SDIO CTL Driver"
1630 depends on MSM_SDIO_CMUX
1631 default n
1632 help
1633 Provides a binary SDIO control port interface.
1634
1635config MSM_ONCRPCROUTER
1636 depends on MSM_SMD
1637 default n
1638 bool "MSM ONCRPC router support"
1639 help
1640 Support for the MSM ONCRPC router for communication between
1641 the ARM9 and ARM11
1642
1643config MSM_IPC_ROUTER
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1644 depends on NET
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1645 default n
1646 bool "MSM IPC Router support"
1647 help
1648 Support for the MSM IPC Router for communication between
1649 the APPs and the MODEM
1650
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1651config MSM_IPC_ROUTER_SMD_XPRT
1652 depends on MSM_SMD
1653 depends on MSM_IPC_ROUTER
1654 default n
1655 bool "MSM SMD XPRT Layer"
1656 help
1657 SMD Transport Layer for IPC Router
1658
Karthikeyan Ramasubramanian5b502d3642012-09-23 22:23:36 -0600[diff] [blame]1659config MSM_IPC_ROUTER_SECURITY
1660 depends on MSM_IPC_ROUTER
1661 bool "MSM IPC Router Security support"
1662 help
1663 This feature of IPC Router will enforce security rules
1664 configured by a security script from the user-space. IPC Router
1665 once configured with the security rules will ensure that the
1666 sender of the message to a service belongs to the relevant
1667 Linux group as configured by the security script.
1668
Karthikeyan Ramasubramanianfec77ff2012-10-26 20:03:26 -0600[diff] [blame]1669config MSM_QMI_INTERFACE
1670 depends on MSM_IPC_ROUTER
1671 depends on QMI_ENCDEC
1672 default n
1673 bool "MSM QMI Interface Library"
1674 help
1675 Library to send and receive QMI messages over IPC Router.
1676 This library provides interface functions to the kernel drivers
1677 to perform QMI message marshaling and transport them over IPC
1678 Router.
1679
Karthikeyan Ramasubramaniana9859e82012-07-12 13:10:42 -0600[diff] [blame]1680config MSM_TEST_QMI_CLIENT
1681 depends on MSM_QMI_INTERFACE
1682 bool "MSM TEST QMI CLIENT"
1683 help
1684 The sample QMI client provides a test code for QMI usage. The
1685 test_service client driver uses QMI interface library to send
1686 and receive QMI messages over IPC Router. The test code sends
1687 a synchronous QMI request to the test_service and handles the
1688 QMI responses.
1689
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1690config MSM_ONCRPCROUTER_DEBUG
1691 depends on MSM_ONCRPCROUTER
1692 default y
1693 bool "MSM debug ONCRPC router support"
1694 help
1695 Support for debugging the ONCRPC router for communication
1696 between the ARM9 and ARM11
1697
1698config MSM_RPC_LOOPBACK_XPRT
1699 depends on MSM_ONCRPCROUTER
1700 default n
1701 bool "MSM RPC local routing support"
1702 help
1703 Support for routing RPC messages between APPS clients
1704 and APPS servers. Helps in testing APPS RPC framework.
1705
1706config MSM_RPCSERVER_TIME_REMOTE
1707 depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
1708 default y
1709 bool "Time remote RPC server"
1710 help
1711 The time remote server receives notification of time bases and
1712 reports these events to registered callback functions.
1713
1714config MSM_RPCSERVER_WATCHDOG
1715 depends on MSM_ONCRPCROUTER
1716 default y
1717 bool "Watchdog RPC server"
1718 help
1719 The dog_keepalive server handles watchdog events.
1720
1721config MSM_RPC_WATCHDOG
1722 depends on MSM_ONCRPCROUTER
1723 default n
1724 bool "Watchdog RPC client"
1725 help
1726 The dog_keepalive client module.
1727
1728config MSM_RPC_PING
1729 depends on MSM_ONCRPCROUTER && DEBUG_FS
1730 default m
1731 bool "MSM rpc ping"
1732 help
1733 Implements MSM rpc ping test module.
1734
1735config MSM_RPC_PROC_COMM_TEST
1736 depends on DEBUG_FS && MSM_PROC_COMM
1737 default m
1738 bool "MSM rpc proc comm test"
1739 help
1740 Implements MSM rpc proc comm test module.
1741
1742config MSM_RPC_OEM_RAPI
1743 depends on MSM_ONCRPCROUTER
1744 default m
1745 bool "MSM oem rapi"
1746 help
1747 Implements MSM oem rapi client module.
1748
1749config MSM_RPCSERVER_HANDSET
1750 depends on MSM_ONCRPCROUTER
1751 default y
1752 bool "Handset events RPC server"
1753 help
1754 Support for receiving handset events like headset detect,
1755 headset switch and clamshell state.
1756
1757config MSM_RMT_STORAGE_CLIENT
1758 depends on (ARCH_MSM && MSM_ONCRPCROUTER)
1759 default n
1760 bool "Remote Storage RPC client"
1761 help
1762 Provide RPC mechanism for remote processors to access storage
1763 device on apps processor.
1764
1765config MSM_RMT_STORAGE_CLIENT_STATS
1766 depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
1767 default n
1768 bool "Remote storage RPC client performance statistics"
1769 help
1770 Collects performance statistics and shows this information
1771 through a debugfs file rmt_storage_stats.
1772
1773config MSM_SDIO_SMEM
1774 depends on MSM_SDIO_AL
1775 default n
1776 bool "SDIO SMEM for remote storage"
1777 help
1778 Copies data from remote MDM9K memory to local MSM8x60
1779 memory. Used by remote storage client to shadow
1780 MDM9K filesystem.
1781
1782config MSM_DALRPC
1783 bool "DAL RPC support"
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]1784 default n
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1785 help
1786 Supports RPC calls to DAL devices on remote processor cores.
1787
1788config MSM_DALRPC_TEST
1789 tristate "DAL RPC test module"
1790 depends on (MSM_DALRPC && DEBUG_FS)
1791 default m
1792 help
1793 Exercises DAL RPC calls to QDSP6.
1794
1795if CPU_FREQ_MSM
1796
1797config MSM_CPU_FREQ_SET_MIN_MAX
1798 bool "Set Min/Max CPU frequencies."
1799 default n
1800 help
1801 Allow setting min and max CPU frequencies. Sysfs can be used
1802 to override these values.
1803
1804config MSM_CPU_FREQ_MAX
1805 int "Max CPU Frequency"
1806 depends on MSM_CPU_FREQ_SET_MIN_MAX
1807 default 384000
1808
1809config MSM_CPU_FREQ_MIN
1810 int "Min CPU Frequency"
1811 depends on MSM_CPU_FREQ_SET_MIN_MAX
1812 default 245760
1813
1814endif # CPU_FREQ_MSM
1815
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1816config MSM_AVS_HW
1817 bool "Enable Adaptive Voltage Scaling (AVS)"
1818 default n
1819 help
1820 Enable AVS hardware to fine tune voltage at each frequency. The
1821 AVS hardware blocks associated with each Qualcomm ARMv7 cores can
1822 fine tune the voltages based on the feedback from the ring
1823 oscillators.
1824
1825config MSM_HW3D
1826 tristate "MSM Hardware 3D Register Driver"
1827 depends on ANDROID_PMEM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1828 help
1829 Provides access to registers needed by the userspace OpenGL|ES
1830 library.
1831
1832config MSM_ADSP
1833 depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
1834 tristate "MSM ADSP driver"
1835 depends on ANDROID_PMEM
1836 default y
1837 help
1838 Provides access to registers needed by the userspace aDSP library.
1839
1840config ADSP_RPC_VER
1841 hex
1842 default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
1843 default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
1844 depends on MSM_ADSP
1845 help
1846 Select proper ADSP RPC version
1847choice
1848 prompt "ADSP RPC version"
1849
1850 default AMSS_7X25_VERSION_2009
1851
1852 config AMSS_7X25_VERSION_2009
1853 bool "2.0.09"
1854
1855 config AMSS_7X25_VERSION_2008
1856 bool "2.0.08"
1857endchoice
1858
1859config MSM7KV2_AUDIO
1860 bool "MSM7K v2 audio"
1861 depends on (ARCH_MSM7X30 && ANDROID_PMEM)
1862 default y
1863 help
1864 Enables QDSP5V2-based audio drivers for audio playbacks and
1865 voice call.
1866
1867config MSM_ADSP_REPORT_EVENTS
1868 bool "Report modem events from the DSP"
1869 default y
1870 depends on (MSM_ADSP || MSM7KV2_AUDIO)
1871 help
1872 Normally, only messages from the aDSP are reported to userspace.
1873 With this option, we report events from the aDSP as well.
1874
1875config MSM_QDSP6
1876 tristate "QDSP6 support"
1877 depends on ARCH_QSD8X50 && ANDROID_PMEM
1878 default y
1879 help
1880 Enable support for qdsp6. This provides audio and video functionality.
1881
1882config MSM8X60_AUDIO
1883 tristate "MSM8X60 audio support"
1884 depends on ARCH_MSM8X60 && ANDROID_PMEM
1885 default y
1886 help
1887 Enable support for qdsp6v2. This provides audio functionality.
1888
1889config MSM8X60_FTM_AUDIO_DEVICES
1890 bool "MSM8X60 audio factory test mode support"
1891 depends on MSM8X60_AUDIO
1892 help
1893 Enable support audio factory test mode devices. This is used
1894 in a production line environment.
1895
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1896config RTAC
1897 bool "MSM8K real-time audio calibration support"
1898 default y
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1899 help
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1900 Enable support for rtac. This enables calibration during
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1901 audio operation
1902
1903config MSM7X27A_AUDIO
1904 bool "MSM7X27A audio support"
1905 depends on ARCH_MSM7X27A && MSM_ADSP
1906 default n
1907 help
1908 Enable support for 7x27a. This provides audio functionality.
1909
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1910config MSM_PROC_COMM_REGULATOR
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1911 bool
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1912 depends on MSM_PROC_COMM && REGULATOR
1913 help
1914 Enable regulator framework support for regulators managed by PMLIB
1915 on the modem, and controlled through proccomm calls.
1916
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1917config MSM_VREG_SWITCH_INVERTED
1918 bool "Reverse vreg switch polarity"
1919 default n
1920 help
1921 Reverses the enable and disable for vreg switch.
1922
1923config MSM_DMA_TEST
1924 tristate "MSM DMA test module"
1925 default m
1926 help
1927 Intended to be compiled as a module. Provides a device node
1928 and ioctls for testing the MSM dma system.
1929
1930config WIFI_CONTROL_FUNC
1931 bool "Enable WiFi control function abstraction"
1932 help
1933 Enables Power/Reset/Carddetect function abstraction
1934
1935config WIFI_MEM_PREALLOC
1936 depends on WIFI_CONTROL_FUNC
1937 bool "Preallocate memory for WiFi buffers"
1938 help
1939 Preallocates memory buffers for WiFi driver
1940
1941config QSD_AUDIO
1942 bool "QSD audio"
1943 depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
1944 default y
1945 help
1946 Provides PCM, MP3, and AAC audio playback.
1947
1948config AUDIO_AAC_PLUS
1949 depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
1950 bool "AAC+ Audio"
1951 default y
1952 help
1953 Provides AAC+ decoding
1954
1955config AUDIO_ENHANCED_AAC_PLUS
1956 depends on AUDIO_AAC_PLUS
1957 bool "Enhanced AAC+ Audio"
1958 default y
1959 help
1960 Provides Enhanced AAC+ decoding
1961
1962config SURF_FFA_GPIO_KEYPAD
1963 bool "MSM SURF/FFA GPIO keypad"
1964 depends on INPUT_GPIO = "y"
1965 default y
1966 help
1967 Select if the GPIO keypad is attached.
1968
1969config MSM_SLEEP_TIME_OVERRIDE
1970 bool "Allow overriding suspend/sleep time with PM module parameter"
1971 default y
1972 help
1973 Enable the module parameter sleep_time_override. Specified
1974 in units of seconds, it overwrites the normal sleep time of
1975 suspend. The feature is required for automated power management
1976 testing.
1977
1978config MSM_MEMORY_LOW_POWER_MODE
1979 bool "Control the low power modes of memory"
1980 default n
1981 help
1982 The application processor controls whether memory should enter
1983 which low power mode.
1984
1985choice
1986 prompt "Default Memory Low Power Mode during Idle"
1987 depends on MSM_MEMORY_LOW_POWER_MODE
1988 default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1989 help
1990 Selects the default low power mode of the memory during idle
1991 sleep.
1992
1993 config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1994 bool "Memory active"
1995
1996 config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
1997 bool "Memory in retention"
1998
1999 config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
2000 bool "Memory in deep power down"
2001endchoice
2002
2003choice
2004 prompt "Default Memory Low Power Mode during Suspend"
2005 depends on MSM_MEMORY_LOW_POWER_MODE
2006 default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2007 help
2008 Selects the default low power mode of the memory during suspend
2009 sleep.
2010
2011 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2012 bool "Memory active"
2013
2014 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
2015 bool "Memory in retention"
2016
2017 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
2018 bool "Memory in deep power down"
2019endchoice
2020
2021choice
2022 prompt "Power management timeout action"
2023 default MSM_PM_TIMEOUT_HALT
2024 help
2025 Selects the Application Processor's action when Power Management
2026 times out waiting for Modem's handshake.
2027
2028 config MSM_PM_TIMEOUT_HALT
2029 bool "Halt the Application Processor"
2030
2031 config MSM_PM_TIMEOUT_RESET_MODEM
2032 bool "Reset the Modem Processor"
2033
2034 config MSM_PM_TIMEOUT_RESET_CHIP
2035 bool "Reset the entire chip"
2036endchoice
2037
2038config MSM_IDLE_WAIT_ON_MODEM
2039 int "Wait for Modem to become ready for idle power collapse"
2040 default 0
2041 help
2042 If Modem is not ready to handle Application Processor's request
2043 for idle power collapse, wait the number of microseconds in case
2044 Modem becomes ready soon.
2045
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2046config MSM_RPM_REGULATOR
2047 bool "RPM regulator driver"
Matt Wagantall32dc71e2012-01-04 11:13:11 -0800[diff] [blame]2048 depends on MSM_RPM && REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2049 help
2050 Compile in support for the RPM regulator driver, used for setting
2051 voltages and other parameters of the various power rails supplied
2052 by some Qualcomm PMICs.
2053
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]2054config MSM_RPM_REGULATOR_SMD
2055 bool "SMD RPM regulator driver"
2056 depends on REGULATOR
2057 depends on OF
2058 depends on MSM_RPM_SMD
2059 help
2060 Compile in support for the SMD RPM regulator driver which is used for
2061 setting voltages and other parameters of the various power rails
2062 supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
2063 be used on systems which contain an RPM which communicates with the
2064 application processor over SMD.
2065
David Collins037d6482013-03-14 16:53:33 -0700[diff] [blame]2066config MSM_SPM_REGULATOR
2067 bool "SPM regulator driver"
2068 depends on REGULATOR && SPMI && OF_SPMI
2069 help
2070 Enable support for the SPM regulator driver which is used for
2071 setting voltages of processor supply regulators via the SPM module
2072 found inside of the MSM chips. The SPM regulator driver can be used
2073 on MSM systems where the APSS processor cores are supplied by their
2074 own PMIC regulator.
2075
Rohit Vaswani5fd759e2012-11-07 07:05:08 -0800[diff] [blame]2076config MSM_SMCMOD
2077 tristate "Secure Monitor Call (SMC) Module"
2078 default n
2079 depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
2080 help
2081 Enable support for smcmod driver. This driver provides a mechanism
2082 to execute the Secure Monitor Call (SMC) to switch from non-secure
2083 to secure execution in the fsm9xxx targets. This module utilizes Ion
2084 for buffer management.
2085
Stephen Boyd01710582012-07-09 13:40:05 -0700[diff] [blame]2086config MSM_SUBSYSTEM_RESTART
2087 bool "MSM Subsystem Restart"
2088 help
2089 This option enables the MSM subsystem restart framework.
2090
2091 The MSM subsystem restart framework provides support to boot,
2092 shutdown, and restart subsystems with a reference counted API.
2093 It also notifies userspace of transitions between these states via
2094 sysfs.
2095
2096config MSM_SYSMON_COMM
2097 bool "MSM System Monitor communication support"
2098 depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
2099 help
2100 This option adds support for MSM System Monitor library, which
2101 provides an API that may be used for notifying subsystems within
2102 the SoC about other subsystems' power-up/down state-changes.
2103
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2104config MSM_PIL
2105 bool "Peripheral image loading"
2106 select FW_LOADER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2107 default n
2108 help
2109 Some peripherals need to be loaded into memory before they can be
2110 brought out of reset.
2111
2112 Say yes to support these devices.
2113
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2114config MSM_PIL_MODEM
2115 tristate "Modem (ARM11) Boot Support"
Stephen Boyd3ac20732012-05-03 18:46:08 -0700[diff] [blame]2116 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2117 help
2118 Support for booting and shutting down ARM11 Modem processors.
2119
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2120config MSM_PIL_QDSP6V3
2121 tristate "QDSP6v3 (Hexagon) Boot Support"
Stephen Boyd2e19d932012-05-09 17:36:04 -0700[diff] [blame]2122 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2123 help
2124 Support for booting and shutting down QDSP6v3 processors (hexagon).
2125 The QDSP6 is a low power DSP used in audio software applications.
2126
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2127config MSM_PIL_LPASS_QDSP6V4
2128 tristate "LPASS QDSP6v4 (Hexagon) Boot Support"
Stephen Boyda1cf76b2012-06-13 12:05:35 -0700[diff] [blame]2129 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2130 help
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2131 Support for booting and shutting down QDSP6v4 processors (hexagon)
2132 in low power audio subsystems. If you would like to record or
2133 play audio then say Y here.
2134
2135 If unsure, say N.
2136
2137config MSM_PIL_MODEM_QDSP6V4
2138 tristate "Modem QDSP6v4 (Hexagon) Boot Support"
Stephen Boyd2efa9962012-06-12 14:20:12 -0700[diff] [blame]2139 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2140 help
2141 Support for booting and shutting down QDSP6v4 processors (hexagon)
2142 in modem subsystems. If you would like to make or receive phone
2143 calls then say Y here.
2144
2145 If unsure, say N.
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2146
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2147config MSM_PIL_LPASS_QDSP6V5
Stephen Boyd633eb622012-06-13 12:05:35 -0700[diff] [blame]2148 tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
2149 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
2150 help
2151 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2152 in low power audio subsystems. This driver also monitors the ADSP
2153 SMSM status bits and the ADSP's watchdog interrupt and restarts the
2154 ADSP if the processor encounters a fatal error.
Matt Wagantall4e2599e2012-03-21 22:31:35 -0700[diff] [blame]2155
2156config MSM_PIL_MSS_QDSP6V5
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2157 tristate "MSS QDSP6v5 (Hexagon) Boot Support"
2158 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantalle6e00d52012-03-08 17:39:07 -0800[diff] [blame]2159 help
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2160 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2161 in modem subsystems. If you would like to make or receive phone
2162 calls then say Y here.
2163
2164 If unsure, say N.
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2165
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2166config MSM_PIL_RIVA
2167 tristate "RIVA (WCNSS) Boot Support"
Stephen Boydfdec00d2012-05-10 17:04:49 -0700[diff] [blame]2168 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2169 help
2170 Support for booting and shutting down the RIVA processor (WCNSS).
2171 Riva is the wireless subsystem processor used in bluetooth, wireless
2172 LAN, and FM software applications.
2173
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2174config MSM_PIL_TZAPPS
2175 tristate "TZApps Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2176 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2177 help
2178 Support for booting and shutting down TZApps.
2179
2180 TZApps is an image that runs in the secure processor state. It is
2181 used to decrypt data and perform secure operations on the behalf of
2182 the kernel.
2183
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2184config MSM_PIL_DSPS
2185 tristate "DSPS Boot Support"
Stephen Boydf169b4b2012-05-10 17:55:55 -0700[diff] [blame]2186 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2187 help
2188 Support for booting and shutting down ARM7 DSPS processors.
2189
2190 DSPS is a sensors offloading processor used for applications such
2191 as rotation detection, temperature, etc.
2192
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2193config MSM_PIL_VIDC
2194 tristate "Video Core Secure Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2195 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2196 help
2197 Support for authenticating the video core image.
2198
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2199config MSM_PIL_VENUS
2200 tristate "VENUS (Video) Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2201 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2202 help
2203 Support for booting and shutting down the VENUS processor (Video).
2204 Venus is the Video subsystem processor used for video codecs.
2205
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2206config MSM_PIL_GSS
Stephen Boydd86214b2012-05-10 15:26:35 -0700[diff] [blame]2207 tristate "GSS (Cortex A5) Boot Support"
2208 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2209 help
2210 Support for booting and shutting down Cortex A5 processors which run
2211 GPS subsystem firmware.
2212
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2213config MSM_PIL_PRONTO
2214 tristate "PRONTO (WCNSS) Boot Support"
Stephen Boyd581fe852012-06-13 12:05:35 -0700[diff] [blame]2215 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2216 help
2217 Support for booting and shutting down the PRONTO processor (WCNSS).
2218 PRONTO is the wireless subsystem processor used in bluetooth, wireless
2219 LAN, and FM software applications.
2220
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2221config MSM_SCM
2222 bool "Secure Channel Manager (SCM) support"
2223 default n
2224
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2225config SCORPION_Uni_45nm_BUG
2226 bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
2227 depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
2228 default y
2229 help
2230 Invalidating the Instruction Cache by Modified Virtual Address to PoU and
2231 invalidating the Branch Predictor Array by Modified Virtual Address can
2232 create invalid entries in the TLB with the wrong ASID values on Scorpion
2233 Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
2234 workaround for Scorpion Uniprocessor 45nm cores.
2235
2236 This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
2237
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2238config MSM_BUSPM_DEV
2239 tristate "MSM Bus Performance Monitor Kernel Module"
Gagan Mac0d5d49e2012-08-28 19:41:37 -0600[diff] [blame]2240 depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2241 default m
2242 help
2243 This kernel module is used to mmap() hardware registers for the
2244 performance monitors, counters, etc. The module can also be used to
2245 allocate physical memory which is used by bus performance hardware to
2246 dump performance data.
2247
Mona Hossain11c03ac2011-10-26 12:42:10 -0700[diff] [blame]2248config MSM_TZ_LOG
2249 tristate "MSM Trust Zone (TZ) Log Driver"
2250 depends on DEBUG_FS
2251 help
2252 This option enables a driver with a debugfs interface for messages
2253 produced by the Secure code (Trust zone). These messages provide
2254 diagnostic information about TZ operation.
2255
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2256config MSM_RPM_LOG
2257 tristate "MSM Resource Power Manager Log Driver"
2258 depends on DEBUG_FS
Priyanka Mathur49c60802012-12-13 12:53:58 -0800[diff] [blame]2259 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2260 default n
2261 help
2262 This option enables a driver which can read from a circular buffer
2263 of messages produced by the RPM. These messages provide diagnostic
2264 information about RPM operation. The driver outputs the messages
2265 via a debugfs node.
2266
2267config MSM_RPM_STATS_LOG
2268 tristate "MSM Resource Power Manager Stat Driver"
2269 depends on DEBUG_FS
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]2270 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2271 default n
2272 help
2273 This option enables a driver which reads RPM messages from a shared
2274 memory location. These messages provide statistical information about
2275 the low power modes that RPM enters. The drivers outputs the message
2276 via a debugfs node.
2277
Girish Mahadevan898c56d2012-06-05 16:09:19 -0600[diff] [blame]2278config MSM_RPM_RBCPR_STATS_LOG
2279 tristate "MSM Resource Power Manager RPBCPR Stat Driver"
2280 depends on DEBUG_FS
2281 depends on MSM_RPM
2282 help
2283 This option enables a driver which reads RPM messages from a shared
2284 memory location. These messages provide statistical information about
2285 RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
2286 outputs the message via a debugfs node.
2287
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2288config MSM_DIRECT_SCLK_ACCESS
2289 bool "Direct access to the SCLK timer"
2290 default n
2291
2292config IOMMU_API
2293 bool
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]2294
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2295config MSM_GPIOMUX
2296 bool
2297
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2298config MSM_SECURE_IO
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2299 bool
Stepan Moskovchenko0ab847452010-11-12 19:29:57 -0800[diff] [blame]2300
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2301config MSM_NATIVE_RESTART
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]2302 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2303
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]2304config MSM_MODEM_RESTART
2305 bool
2306
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2307config MSM_PM2
2308 depends on PM
2309 bool
2310
2311config MSM_PM8X60
2312 depends on PM
2313 bool
2314
Girish Mahadevan388c3082012-09-10 15:30:36 -0600[diff] [blame]2315config MSM_EVENT_TIMER
2316 bool "Event timer"
2317 help
2318 This option enables a modules that manages a list of event timers that
2319 need to be monitored by the PM. The enables the PM code to monitor
2320 events that require the core to be awake and ready to handle the
2321 event.
2322
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2323config MSM_NOPM
2324 default y if !PM
2325 bool
2326
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2327config MSM_BUS_SCALING
2328 bool "Bus scaling driver"
2329 default n
2330
Gagan Mac85c70492011-06-10 16:07:47 -0600[diff] [blame]2331config MSM_BUS_RPM_MULTI_TIER_ENABLED
2332 bool "RPM Multi-tiering Configuration"
2333 depends on MSM_BUS_SCALING
2334
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2335config MSM_WATCHDOG
2336 bool "MSM Watchdog Support"
Rohit Vaswanie897f842012-03-19 14:19:34 -0700[diff] [blame]2337 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2338 help
2339 This enables the watchdog as is present on 8x60. Currently we use
2340 core 0's watchdog, and reset the entire SoC if it times out. It does
2341 not run during the bootup process, so it will not catch any early
2342 lockups.
2343
Hanumant Singhd1f01022012-07-05 14:21:53 -0700[diff] [blame]2344config MSM_WATCHDOG_V2
2345 bool "MSM Watchdog Support"
2346 help
2347 This enables the watchdog module. It causes kernel panic if the
2348 watchdog times out. It allows for detection of cpu hangs and
2349 deadlocks. It does not run during the bootup process, so it will
2350 not catch any early lockups.
2351
Hanumant Singh5e2541c2012-07-31 14:41:14 -0700[diff] [blame]2352config MSM_MEMORY_DUMP
2353 bool "MSM Memory Dump Support"
2354 help
2355 This enables memory dump feature. It allows various client
2356 subsystems to register respective dump regions. At the time
2357 of deadlocks or cpu hangs these dump regions are captured to
2358 give a snapshot of the system at the time of the crash.
2359
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2360config MSM_DLOAD_MODE
2361 bool "Enable download mode on crashes"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2362 default n
2363 help
2364 This makes the SoC enter download mode when it resets
2365 due to a kernel panic. Note that this doesn't by itself
2366 make the kernel reboot on a kernel panic - that must be
2367 enabled via another mechanism.
2368
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2369config MSM_JTAG
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2370 bool "Debug and ETM trace support across power collapse"
Pratik Patelfd6f56a2011-10-10 17:47:55 -0700[diff] [blame]2371 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2372 Enables support for debugging (specifically breakpoints) and ETM
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2373 processor tracing across power collapse both for JTag and OS hosted
2374 software running on the target. Enabling this will ensure debug
2375 and ETM registers are saved and restored across power collapse.
2376
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2377 If unsure, say 'N' here to avoid potential power, performance and
2378 memory penalty.
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2379
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2380config MSM_JTAG_MM
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2381 bool "Debug and ETM trace support across power collapse using memory mapped access"
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2382 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2383 Enables support for debugging (specifically breakpoints) and ETM
2384 processor tracing across power collapse both for JTag and OS hosted
2385 software running on the target. Enabling this will ensure debug
2386 and ETM registers are saved and restored across power collapse.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2387
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2388 Required on targets on which cp14 access to debug and ETM registers is
2389 not permitted and so memory mapped access is necessary.
2390
2391 If unsure, say 'N' here to avoid potential power, performance and
2392 memory penalty.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2393
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2394config MSM_ETM
2395 tristate "Enable MSM ETM and ETB"
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2396 depends on ARCH_MSM8X60
2397 select MSM_JTAG
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2398 help
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2399 Enables embedded trace collection on MSM8660
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2400
Lynus Vazdde09ee2012-01-05 13:28:22 +0530[diff] [blame]2401config MSM_SLEEP_STATS_DEVICE
2402 bool "Enable exporting of MSM sleep device stats to userspace"
2403
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2404config MSM_RUN_QUEUE_STATS
2405 bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]2406 default n
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]2407 help
2408 This option enalbes statistics collection on Run Queue. A daemon
2409 in user mode, called MPDecision will be using this data to decide
2410 on when to switch off/on the other cores.
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2411
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2412config MSM_STANDALONE_POWER_COLLAPSE
2413 bool "Enable standalone power collapse"
2414 default n
2415
2416config MSM_GSBI9_UART
2417 bool "Enable GSBI9 UART device"
2418 default n
2419 help
2420 This enables GSBI9 configured into UART.
2421
2422config MSM_SHARED_GPIO_FOR_UART2DM
2423 bool "Use shared GPIOs into UART mode"
2424 depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
2425 help
2426 This option configures GPIO muxed with SDC4/MMC3
2427 8-bit mode into UART mode. It is used for serial
2428 console on UART2DM. Say Y if you want to have
2429 serial console on UART2DM.
2430
2431config MSM_SHOW_RESUME_IRQ
2432 bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsmancc147032011-11-23 13:03:56 -0800[diff] [blame]2433 depends on (ARM_GIC || PMIC8058)
2434 default y if PMIC8058
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2435 default n
2436 help
2437 This option logs wake up interrupts that have triggered just before
2438 the resume loop unrolls. Say Y if you want to debug why the system
2439 resumed.
2440
2441config BT_MSM_PINTEST
2442 tristate "MSM Bluetooth Pin Connectivity Test"
2443 depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
2444 default n
2445 help
2446 Bluetooth MSM Pin Connectivity test module.
2447 This driver provides support for verifying the MSM to BT pin
2448 connectivity.
2449
2450config MSM_FAKE_BATTERY
2451 depends on POWER_SUPPLY
2452 default n
2453 bool "MSM Fake Battery"
2454 help
2455 Enables MSM fake battery driver.
2456
2457config MSM_QDSP6_APR
2458 bool "Audio QDSP6 APR support"
2459 depends on MSM_SMD
2460 default n
2461 help
2462 Enable APR IPC protocol support between
2463 application processor and QDSP6. APR is
2464 used by audio driver to configure QDSP6's
2465 ASM, ADM and AFE.
2466
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]2467config MSM_QDSP6_APRV2
2468 bool "Audio QDSP6 APRv2 support"
2469 depends on MSM_SMD
2470 default n
2471 help
2472 Enable APRv2 IPC protocol support between
2473 application processor and QDSP6. APR is
2474 used by audio driver to configure QDSP6's
2475 ASM, ADM and AFE.
2476
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]2477config MSM_QDSP6_CODECS
2478 bool "Audio Codecs on QDSP6 APR "
2479 depends on MSM_SMD
2480 default n
2481 help
2482 Enable Audio codecs with APR IPC protocol support between
2483 application processor and QDSP6. APR is
2484 used by audio driver to configure QDSP6's
2485 ASM, ADM and AFE.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2486
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2487config MSM_QDSP6V2_CODECS
2488 bool "Audio QDSP6V2 APR support"
2489 depends on MSM_SMD
2490 help
2491 Enable Audio codecs with APR IPC protocol support between
2492 application processor and QDSP6 for B-family. APR is
2493 used by audio driver to configure QDSP6's
2494 ASM, ADM and AFE.
2495
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2496config MSM_AUDIO_QDSP6
2497 bool "QDSP6 HW Audio support"
2498 select SND_SOC_MSM_QDSP6_INTF
2499 default n
2500 help
2501 Enable HW audio support in QDSP6.
2502 QDSP6 can support HW encoder & decoder and audio processing
2503
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2504config MSM_AUDIO_QDSP6V2
2505 bool "QDSP6V2 HW Audio support"
2506 select SND_SOC_MSM_QDSP6V2_INTF
2507 help
2508 Enable HW audio support in QDSP6V2.
2509 QDSP6V2 can support HW encoder & decoder and
2510 audio processing. It will enable support for
2511 AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
2512 others.
2513
Joonwoo Park4a14a552012-08-02 11:03:21 -0700[diff] [blame]2514config MSM_ADSP_LOADER
2515 tristate "ADSP loader support"
2516 select SND_SOC_MSM_APRV2_INTF
2517 depends on MSM_AUDIO_QDSP6V2 && m
2518 help
2519 Enable ADSP image loader.
2520 The ADSP loader brings ADSP out of reset
2521 for the platforms that use APRv2.
2522 Say M if you want to enable this module.
2523
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2524config MSM_ULTRASOUND_A
2525 bool "QDSP6 HW Ultrasound support"
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2526 help
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2527 Enable HW ultrasound support in QDSP6.
2528 QDSP6 can support HW encoder & decoder and
2529 ultrasound processing. It will enable
2530 ultrasound data paths between
2531 HW and services, calculating input events
2532 upon the ultrasound data.
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2533
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]2534config MSM_ULTRASOUND_B
2535 bool "QDSP6V2 HW Ultrasound support"
2536 help
2537 Enable HW Ultrasound support in QDSP6V2.
2538 QDSP6V2 can support HW encoder & decoder and
2539 ultrasound processing. It will enable
2540 ultrasound data paths between
2541 HW and services, calculating input events
2542 upon the ultrasound data.
2543
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2544config MSM_RPC_VIBRATOR
2545 bool "RPC based MSM Vibrator Support"
2546 depends on MSM_ONCRPCROUTER
2547 help
2548 Enable the vibrator support on MSM over RPC. The vibrator
2549 is connected on the PMIC. Say Y if you want to enable this
2550 feature.
2551
2552config PM8XXX_RPC_VIBRATOR
2553 bool "RPC based Vibrator on PM8xxx PMICs"
2554 depends on MSM_RPC_VIBRATOR
2555 help
2556 Enable the vibrator support on MSM over RPC. The vibrator
2557 is connected on the PM8XXX PMIC. Say Y if you want to enable
2558 this feature.
2559
2560config MSM_SPM_V1
2561 bool "Driver support for SPM Version 1"
2562 help
2563 Enables the support for Version 1 of the SPM driver. SPM hardware is
2564 used to manage the processor power during sleep. The driver allows
2565 configuring SPM to allow different power modes.
2566
2567config MSM_SPM_V2
2568 bool "Driver support for SPM Version 2"
2569 help
2570 Enables the support for Version 2 of the SPM driver. SPM hardware is
2571 used to manage the processor power during sleep. The driver allows
2572 configuring SPM to allow different power modes.
2573
2574config MSM_L2_SPM
2575 bool "SPM support for L2 cache"
2576 depends on MSM_SPM_V2
2577 help
2578 Enable SPM driver support for L2 cache. Some MSM chipsets allow
2579 control of L2 cache low power mode with a Subsystem Power manager.
2580 Enabling this driver allows configuring L2 SPM for low power modes
2581 on supported chipsets.
2582
Laura Abbott2d1760b2011-09-29 21:31:24 -0700[diff] [blame]2583config MSM_MULTIMEDIA_USE_ION
2584 bool "Multimedia suport using Ion"
2585 depends on ION_MSM
2586 help
2587 Enable support for multimedia drivers using Ion for buffer management
2588 instead of pmem. Selecting this may also involve userspace
2589 dependencies as well.
2590
Naveen Ramaraj51f5e8b2012-04-09 15:58:40 -0700[diff] [blame]2591config MSM_OCMEM
2592 bool "MSM On-Chip memory driver (OCMEM)"
2593 help
2594 Enable support for On-Chip Memory available on certain MSM chipsets.
2595 OCMEM is a low latency, high performance pool shared by subsystems.
2596
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2597config MSM_OCMEM_LOCAL_POWER_CTRL
2598 bool "OCMEM Local Power Control"
2599 depends on MSM_OCMEM
2600 help
2601 Enable direct power management of the OCMEM core by the
2602 OCMEM driver. By default power management is delegated to
2603 the RPM. Selecting this option causes the OCMEM driver to
2604 directly handle the various macro power transitions.
2605
2606config MSM_OCMEM_DEBUG
2607 bool "OCMEM Debug Support"
2608 depends on MSM_OCMEM
2609 help
2610 Enable debug options for On-chip Memory (OCMEM) driver.
2611 Various debug options include memory, power and latency.
2612 Choosing one of these options allows debugging of each
2613 individual subsystem separately.
2614
Naveen Ramarajc71b2de2012-08-20 12:35:52 -0700[diff] [blame]2615config MSM_OCMEM_NONSECURE
2616 bool "OCMEM Non Secure Mode"
2617 depends on MSM_OCMEM_DEBUG
2618 help
2619 Disable OCMEM interaction with secure processor.
2620 By default OCMEM is secured and accesses for each master
2621 is requested by the OCMEM driver. Selecting this option
2622 causes the OCMEM memory to be in non-secure state unless
2623 its locked down by the secure processor.
2624
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2625config MSM_OCMEM_POWER_DEBUG
2626 bool "OCMEM Power Debug Support"
2627 depends on MSM_OCMEM_DEBUG
2628 help
2629 Enable debug support for OCMEM power management.
2630 This adds support for verifying all power management
2631 related operations of OCMEM. Both local power management
2632 and RPM assisted power management operations are supported.
2633
Naveen Ramaraj4b1d9392012-08-06 21:05:14 -0700[diff] [blame]2634config MSM_OCMEM_POWER_DISABLE
2635 bool "OCMEM Disable Power Control"
2636 depends on MSM_OCMEM_DEBUG
2637 help
2638 Disable all OCMEM power management.
2639 This keeps all OCMEM macros turned ON at all times thus
2640 never allowing them to be turned OFF. Both local power
2641 management and RPM assisted power modes are supported.
2642
Naveen Ramaraj88f23632012-10-10 12:23:29 -0700[diff] [blame]2643config SENSORS_ADSP
2644 bool "Enable Sensors Driver Support for ADSP"
2645 help
2646 Add support for sensors ADSP driver.
2647 This driver is used for exercising different sensors use cases,
2648 such as for lower-power OCMEM use cases, and for time syncing
2649 with ADSP clock.
2650
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2651config MSM_RTB
2652 bool "Register tracing"
2653 help
2654 Add support for logging different events to a small uncached
2655 region. This is designed to aid in debugging reset cases where the
2656 caches may not be flushed before the target resets.
2657
2658config MSM_RTB_SEPARATE_CPUS
2659 bool "Separate entries for each cpu"
2660 depends on MSM_RTB
Laura Abbott9959f982012-02-28 11:30:50 -0800[diff] [blame]2661 depends on SMP
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2662 help
2663 Under some circumstances, it may be beneficial to give dedicated space
2664 for each cpu to log accesses. Selecting this option will log each cpu
2665 separately. This will guarantee that the last acesses for each cpu
2666 will be logged but there will be fewer entries per cpu
2667
Stepan Moskovchenko57884842012-06-07 17:35:49 -0700[diff] [blame]2668config MSM_EBI_ERP
2669 bool "External Bus Interface (EBI) error reporting"
2670 help
2671 Say 'Y' here to enable reporting of external bus interface errors to
2672 the kernel log. Information such as the offending address and
2673 transaction type will be logged. This may be useful for debugging
2674 seemingly broken memory accesses.
2675
2676 For production builds, you should probably say 'N' here.
2677
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2678config MSM_CACHE_ERP
2679 bool "Cache / CPU error reporting"
2680 depends on ARCH_MSM_KRAIT
2681 help
2682 Say 'Y' here to enable reporting of cache and TLB errors to the kernel
2683 log. Enabling this feature can be used as a system debugging technique
2684 if cache corruption is suspected. Cache error statistics will also be
2685 reported in /proc/cpu/msm_cache_erp.
2686
2687 For production builds, you should probably say 'N' here.
2688
2689config MSM_L1_ERR_PANIC
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2690 bool "Panic on L1 cache errors"
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2691 depends on MSM_CACHE_ERP
2692 help
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2693 To cause the kernel to panic whenever an L1 cache error is detected, say
2694 'Y' here. This may be useful as a debugging technique if general system
2695 instability is suspected.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2696
2697 For production builds, you should probably say 'N' here.
2698
Stepan Moskovchenkoe1aba3d2012-12-06 18:40:25 -0800[diff] [blame]2699config MSM_L1_RECOV_ERR_PANIC
2700 bool "Panic on recoverable L1 cache errors"
2701 depends on MSM_CACHE_ERP && MSM_L1_ERR_PANIC
2702 help
2703 Certain CPU designs may be able to automatically recover from certain
2704 kinds of L1 cache errors, even though the L1 cache itself may not
2705 support error correction. These errors should not result in any kind
2706 of corruption, but their presence is nevertheless an indication of
2707 poor system health. To cause the kernel to panic whenever a
2708 recoverable L1 cache error is detected, say 'Y' here. This may be
2709 useful as a debugging technique if general system instability is
2710 suspected.
2711
2712 For production builds, you should definitely say 'N' here.
2713
Stepan Moskovchenko7035f652012-05-31 17:48:01 -0700[diff] [blame]2714config MSM_L1_ERR_LOG
2715 bool "Log CPU ERP events to system memory"
2716 depends on MSM_CACHE_ERP
2717 help
2718 Enable logging CPU ERP events to an area of memory that will be
2719 preserved across a system reset. This may be useful for detecting and
2720 troubleshooting ERP-related system crashes in the field.
2721
2722 For production builds, you may want to say 'Y' here.
2723
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2724config MSM_L2_ERP_PRINT_ACCESS_ERRORS
2725 bool "Report L2 master port slave/decode errors in kernel log"
2726 depends on MSM_CACHE_ERP
2727 help
2728 Master port errors can occur when a memory request is not properly
2729 handled by the destination slave. This can occur if the destination
2730 register does not exist or is inaccessible due to security
2731 restrictions or (in some cases) clock configuration. Enabling this
2732 option will cause a backtrace to be printed to the kernel log whenever
2733 such an error is encountered. Note that the error is reported as an
2734 interrupt rather than as an exception, meaning that the backtrace may
2735 have some skid. This option may help with debugging, though production
2736 builds should probably say 'N' here.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2737
2738config MSM_L2_ERP_PORT_PANIC
2739 bool "Panic on L2 master port errors"
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2740 depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2741 help
2742 Master port errors can occur when a memory request is not properly
2743 handled by the destination slave. Enable this option to catch drivers
2744 which attempt to access bad areas of the address space, or access
2745 hardware registers in an improper state (such as certain clocks not
2746 being on). This option may help with debugging, though production
2747 builds should probably say 'N' here.
2748
2749config MSM_L2_ERP_1BIT_PANIC
2750 bool "Panic on recoverable L2 soft errors"
2751 depends on MSM_CACHE_ERP
2752 help
2753 Enable this option to cause a kernel panic whenever the L2 cache
2754 encounters a single-bit (correctable) soft error. This option should
2755 only be enabled when doing low-level debugging where cache corruption
2756 is suspected.
2757
2758 For production builds, you should definitely say 'N' here.
2759
2760config MSM_L2_ERP_2BIT_PANIC
2761 bool "Panic on unrecoverable L2 soft errors"
2762 depends on MSM_CACHE_ERP
2763 help
2764 Enable this option to cause a kernel panic whenever the L2 cache
2765 encounters a double-bit (non-correctable) soft error. Debug builds
2766 will likely benefit from having this option enabled to catch cache
2767 problems as soon as possible.
2768
2769 For production builds, it may be acceptable to say 'N' here, since
2770 an uncorrectable error might not necessarily cause further problems.
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2771
Praveen Chidambaramf53ef1b2011-12-06 08:27:49 -0700[diff] [blame]2772config MSM_DCVS
2773 bool "Use MSM DCVS for CPU/GPU Frequency control"
2774 depends on MSM_SCM
2775 help
2776 Enable support for MSM DCVS to control all CPU and GPU core frequencies.
2777 The DCVS manager allows idle driver to feed the idle information to the
2778 algorithm and the algorithm returns a frequency for the core which is
2779 passed to the frequency change driver.
2780
Pankaj Kumar32ce1ea2012-04-04 20:29:29 +0530[diff] [blame]2781config MSM_CPR
2782 tristate "Use MSM CPR in S/W mode"
2783 help
2784 Enable CPR (core power reduction) in S/W mode, where the processor
2785 get's the notification from CPR block and programs the PMIC.
2786
2787config MSM_VP_REGULATOR
2788 tristate "Use MSM PMIC8029 C2 regulator"
2789 depends on ARCH_MSM8625
2790 help
2791 Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
2792 for MSMs like 8625.
2793
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]2794config HAVE_ARCH_HAS_CURRENT_TIMER
2795 bool
Laura Abbott306bcc22012-03-08 11:24:53 -0800[diff] [blame]2796
2797config MSM_CACHE_DUMP
2798 bool "Cache dumping support"
2799 help
2800 Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
2801 This allows for analysis of the caches in case cache corruption is
2802 suspected.
2803
Laura Abbott7b637362012-03-29 16:43:49 -0700[diff] [blame]2804config MSM_CACHE_DUMP_ON_PANIC
2805 bool "Dump caches on panic"
2806 depends on MSM_CACHE_DUMP
2807 help
2808 By default, the caches are flushed on panic. This means that trying to
2809 look at them in a RAM dump will give useless data. Select this if you
2810 want to dump the L1 and L2 caches on panic before any flush occurs.
2811 If unsure, say N
2812
Jack Phamccbbfab2012-04-09 19:50:20 -0700[diff] [blame]2813config MSM_HSIC_SYSMON
2814 tristate "MSM HSIC system monitor driver"
2815 depends on USB
2816 help
2817 Add support for bridging with the system monitor interface of MDM
2818 over HSIC. This driver allows the local system monitor to
2819 communicate with the remote system monitor interface.
2820
2821config MSM_HSIC_SYSMON_TEST
2822 tristate "MSM HSIC system monitor bridge test"
2823 depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
2824 help
2825 Enable the test hook for the Qualcomm system monitor HSIC driver.
2826 This will create a debugfs file entry named "hsic_sysmon_test" which
2827 can be read and written to send character data to the sysmon port of
2828 the modem over USB.
2829
Anirudh Ghayal0d2291a2012-09-20 21:31:41 +0530[diff] [blame]2830config MSM_RPC_PMIC
2831 tristate "MSM RPC PMIC driver"
2832 depends on MSM_ONCRPCROUTER
2833 help
2834 This driver supports the PMIC functionality over RPC for those MSM's
2835 which do not have a direct access to PMIC. It supports ability to
2836 configure MPP, GPIO and all the other supported peripherals of the
2837 PMIC.
2838
Anirudh Ghayald3a63732012-09-20 22:13:13 +0530[diff] [blame]2839config MSM_RPC_USB
2840 tristate "MSM RPC USB driver"
2841 depends on MSM_ONCRPCROUTER
2842 help
2843 This driver supports the USB configuration support over the RPC
2844 interface. It support the HS USB module connected to the MSM
2845 and FS USB which is connected over the PMIC. This support is
2846 required for MSMs on which the APPS does not have a direct access
2847 to the PMIC.
2848
2849config MSM_RPC_PMAPP
2850 tristate "MSM RPC PMIC APP driver"
2851 depends on MSM_ONCRPCROUTER
2852 help
2853 This driver supports the configuration of various PMIC APP modules
2854 such as display backlight, vreg pin-ctrl, smps clock over the RPC
2855 interface. This support is required for MSMs on which the APPS
2856 does not have a direct access to the PMIC.
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2857
2858config MSM_ENABLE_WDOG_DEBUG_CONTROL
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2859 bool "Enable control of watchdog debug and boot partition select"
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2860 help
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2861 Enables support for controlling watchdog debug and boot partition
2862 select. This is currently used to bypass debug image for PS_HOLD reset
2863 by disabling watchdog debug and boot partition select. This allows
2864 for a clean MSM reset for reboot scenarios.
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2865
2866config MSM_FIQ
2867 bool "Enable FIQ for debugging"
2868 depends on ARCH_MSM8625
2869 select FIQ
Taniya Das36e4aa12012-07-04 18:27:16 +0530[diff] [blame]2870 select GIC_SECURE
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2871 help
2872 Enable any line to be used as an FIQ. This will help debugging
2873 if apps is not responding and holding lock with irqs disabled.
2874 Modem will then generate an raise a FIQ on this line before sending
2875 SMSM reset.
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]2876
2877config MSM_USE_USER_ACCESSIBLE_TIMERS
2878 bool "Enables mapping an MSM timer counter page to user space."
2879 depends on ARM_USE_USER_ACCESSIBLE_TIMERS
2880 help
2881 Enables MSM-specific user accessible timers via a shared
2882 memory page containing the cycle counter.
2883
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]2884config USE_DEV_CTRL_VOLUME
2885 bool "Use Device Control Volume"
2886 help
2887 Use Device Control Volume as opposed to ALSA volume control.
2888
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]2889config MSM_CPU_PWRCTL
2890 bool "Ensures that krait droop detectors are always off"
2891 help
2892 Droop detector mechanism can adversely affect krait plls during
2893 stand alone power collapse operation. Selecting this option
2894 ensures that they are always off.
2895
Saket Saurabh6089f952012-12-07 15:49:13 +0530[diff] [blame]2896config MSM_UARTDM_Core_v14
2897 bool "Use MSM BLSP based HSUART Core v1.4"
2898 depends on SERIAL_MSM_HS
2899 help
2900 Select if BLSP based UART Core v.14 or higher is present.
Abhimanyu Kapurcf3ed152013-03-01 19:32:19 -0800[diff] [blame]2901
2902config MSM_BOOT_STATS
2903 bool "Use MSM boot stats reporting"
2904 help
2905 Use this to report msm boot stats such as bootloader throughput,
2906 display init, total boot time.
2907 This figures are reported in mpm sleep clock cycles and have a
2908 resolution of 31 bits as 1 bit is used as an overflow check.
Syed Rameez Mustafa37f93472013-03-18 15:49:48 -0700[diff] [blame]2909
2910config MSM_XPU_ERR_FATAL
2911 bool "Configure XPU violations as fatal errors"
2912 help
2913 Select if XPU violations have to be configured as fatal errors.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2914endif