Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / b9dedc695fb86b5c3a9d32af16f250abefa95d81 / . / arch / arm / mach-msm / Kconfig
blob: 5ca6d2b72096a497ef7c6dfdd2a8c0de631f584c [file] [log] [blame]
Brian Swetland1637de02008-09-09 07:13:33 -0700[diff] [blame]1if ARCH_MSM
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]3menu "MSM SoC Type"
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]4
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]5config ARCH_MSM7X01A
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]6 bool "MSM7x00A / MSM7x01A"
7 select ARCH_MSM_ARM11
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]8 select MSM_VIC
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]9 select CPU_V6
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]10 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]11 select MSM_REMOTE_SPINLOCK_SWP
12
13config ARCH_MSM7X25
14 bool "MSM7x25"
15 select ARCH_MSM_ARM11
16 select MSM_VIC
17 select CPU_V6
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]18 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]19 select MSM_REMOTE_SPINLOCK_SWP
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]20 select MULTI_IRQ_HANDLER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]21
22config ARCH_MSM7X27
23 bool "MSM7x27"
24 select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
Trilok Soni7ff06e02012-10-15 01:05:24 +0530[diff] [blame]25 select ARCH_HAS_BARRIERS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]26 select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
27 select MSM_VIC
28 select CPU_V6 if MSM_SOC_REV_NONE
29 select CPU_V7 if MSM_SOC_REV_A
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]30 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]31 select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
32 select MSM_GPIOMUX
33 select REGULATOR
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]34 select MULTI_IRQ_HANDLER
Pankaj Kumar75c86fd2011-10-01 18:51:09 +0530[diff] [blame]35 select MSM_PROC_COMM_REGULATOR
Laura Abbott1fbd2e62011-12-18 10:26:46 -0800[diff] [blame]36 select CLEANCACHE
37 select QCACHE
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]38 select MSM_PM2 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]39 select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Dasd4c39f92012-05-14 17:41:49 +0530[diff] [blame]40 select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]41 select MIGHT_HAVE_CACHE_L2X0
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]42 select MSM_MODEM_RESTART
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]43
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]44config ARCH_MSM7X30
45 bool "MSM7x30"
46 select ARCH_MSM_SCORPION
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]47 select MSM_VIC
48 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]49 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]50 select MSM_REMOTE_SPINLOCK_DEKKERS
51 select ARCH_SPARSEMEM_ENABLE
Laura Abbott78593b52011-09-26 18:48:14 -0700[diff] [blame]52 select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]53 select MIGRATION
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]54 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]55 select RESERVE_FIRST_PAGE
56 select MSM_DALRPC
57 select MSM_SPM_V1
58 select REGULATOR
Justin Paupore637a25d2011-07-14 17:11:04 -0700[diff] [blame]59 select MSM_PROC_COMM_REGULATOR
Taniya Dasbae99fb2011-10-12 09:55:13 +0530[diff] [blame]60 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]61 select MSM_PM2 if PM
Chintan Pandyabb021762012-06-21 15:03:29 +0530[diff] [blame]62 select HOLES_IN_ZONE if SPARSEMEM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]63 select MSM_MODEM_RESTART
Chintan Pandya62a2f7c2012-10-30 12:00:40 +0530[diff] [blame]64 select ARM_HAS_SG_CHAIN
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]65
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]66config ARCH_QSD8X50
67 bool "QSD8X50"
68 select ARCH_MSM_SCORPION
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]69 select MSM_VIC
70 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]71 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]72 select MSM_REMOTE_SPINLOCK_LDREX
73 select CPU_USE_DOMAINS
74 select EMULATE_DOMAIN_MANAGER_V7
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]75 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]76 select MSM_DALRPC
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]77 select MSM_PM2 if PM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]78 select MSM_MODEM_RESTART
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]79
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]80config ARCH_MSM8X60
81 bool "MSM8X60"
Jeff Ohlsteine14411d2010-11-30 13:06:36 -0800[diff] [blame]82 select ARCH_MSM_SCORPIONMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]83 select SMP_PARALLEL_START if SMP
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]84 select ARM_GIC
85 select CPU_V7
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]86 select MSM_REMOTE_SPINLOCK_LDREX
87 select ARCH_REQUIRE_GPIOLIB
88 select MSM_ADM3
89 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]90 select MSM_RPM_REGULATOR
David Brown1a5ab4b2011-05-16 15:53:38 -0700[diff] [blame]91 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]92 select MSM_PIL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]93 select ARCH_HAS_CPU_IDLE_WAIT
94 select MSM_DIRECT_SCLK_ACCESS
95 select MSM_RPM
96 select MSM_XO
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]97 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]98 select MSM_BUS_SCALING
99 select MSM_SECURE_IO
100 select MSM_DALRPC
101 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]102 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]103 select MSM_NATIVE_RESTART
104 select ARCH_INLINE_SPIN_TRYLOCK
105 select ARCH_INLINE_SPIN_TRYLOCK_BH
106 select ARCH_INLINE_SPIN_LOCK
107 select ARCH_INLINE_SPIN_LOCK_BH
108 select ARCH_INLINE_SPIN_LOCK_IRQ
109 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
110 select ARCH_INLINE_SPIN_UNLOCK
111 select ARCH_INLINE_SPIN_UNLOCK_BH
112 select ARCH_INLINE_SPIN_UNLOCK_IRQ
113 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
114 select ARCH_INLINE_READ_TRYLOCK
115 select ARCH_INLINE_READ_LOCK
116 select ARCH_INLINE_READ_LOCK_BH
117 select ARCH_INLINE_READ_LOCK_IRQ
118 select ARCH_INLINE_READ_LOCK_IRQSAVE
119 select ARCH_INLINE_READ_UNLOCK
120 select ARCH_INLINE_READ_UNLOCK_BH
121 select ARCH_INLINE_READ_UNLOCK_IRQ
122 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
123 select ARCH_INLINE_WRITE_TRYLOCK
124 select ARCH_INLINE_WRITE_LOCK
125 select ARCH_INLINE_WRITE_LOCK_BH
126 select ARCH_INLINE_WRITE_LOCK_IRQ
127 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
128 select ARCH_INLINE_WRITE_UNLOCK
129 select ARCH_INLINE_WRITE_UNLOCK_BH
130 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
131 select CPU_HAS_L2_PMU
132 select MSM_SPM_V1
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]133 select MSM_SCM if SMP
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]134 select MULTI_IRQ_HANDLER
Laura Abbott46505f62011-11-02 18:06:55 -0700[diff] [blame]135 select MSM_MULTIMEDIA_USE_ION
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]136 select MSM_PM8X60 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]137 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]138 select ARM_HAS_SG_CHAIN
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]139 select USE_DEV_CTRL_VOLUME
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]140
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]141config ARCH_MSM8960
142 bool "MSM8960"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]143 select ARCH_MSM_KRAITMP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]144 select ARM_GIC
145 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]146 select GPIO_MSM_V2
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]147 select MSM_GPIOMUX
148 select MSM_SCM if SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]149 select MSM_DIRECT_SCLK_ACCESS
150 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]151 select MSM_RPM_REGULATOR
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]152 select MSM_RPM
153 select MSM_XO
154 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]155 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]156 select MSM_PIL
157 select MSM_AUDIO_QDSP6 if SND_SOC
158 select CPU_HAS_L2_PMU
159 select MSM_SPM_V2
160 select MSM_L2_SPM
161 select MSM_NATIVE_RESTART
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]162 select DONT_MAP_HOLE_AFTER_MEMBANK0
163 select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]164 select ARCH_HAS_HOLES_MEMORYMODEL
Larry Basseld4d82c92011-12-07 09:52:49 -0800[diff] [blame]165 select CLEANCACHE
166 select QCACHE
Laura Abbott6d61a912011-10-27 16:44:14 -0700[diff] [blame]167 select MSM_MULTIMEDIA_USE_ION
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]168 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]169 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]170 select HOLES_IN_ZONE if SPARSEMEM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]171 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]172 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]173 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]174 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]175 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]176 select GENERIC_TIME_VSYSCALL
177 select USE_USER_ACCESSIBLE_TIMERS
178 select ARM_USE_USER_ACCESSIBLE_TIMERS
179 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]180 select MSM_CPU_PWRCTL
Priyanka Mathurdcaaaa9f2012-12-05 18:51:03 -0800[diff] [blame]181 select MSM_LPM_TEST
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]182
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]183config ARCH_MSM8930
184 bool "MSM8930"
185 select ARCH_MSM_KRAITMP
186 select ARM_GIC
187 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]188 select GPIO_MSM_V2
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]189 select MSM_GPIOMUX
190 select MSM_SCM if SMP
191 select MSM_DIRECT_SCLK_ACCESS
192 select REGULATOR
David Collins5779cea2012-01-05 15:09:21 -0800[diff] [blame]193 select MSM_RPM_REGULATOR
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]194 select MSM_RPM
195 select MSM_XO
196 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]197 select MSM_QDSP6_CODECS
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]198 select MSM_PIL
199 select MSM_AUDIO_QDSP6 if SND_SOC
200 select CPU_HAS_L2_PMU
201 select MSM_SPM_V2
202 select MSM_L2_SPM
203 select MSM_NATIVE_RESTART
204 select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]205 select MSM_REMOTE_SPINLOCK_SFPB
Larry Basself74479e2011-09-08 11:07:52 -0700[diff] [blame]206 select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]207 select MSM_ULTRASOUND_A
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]208 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]209 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]210 select HOLES_IN_ZONE if SPARSEMEM
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]211 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]212 select MSM_KRAIT_WFE_FIXUP
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]213 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]214 select GENERIC_TIME_VSYSCALL
215 select USE_USER_ACCESSIBLE_TIMERS
216 select ARM_USE_USER_ACCESSIBLE_TIMERS
217 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]218 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]219
220config ARCH_APQ8064
221 bool "APQ8064"
222 select ARCH_MSM_KRAITMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]223 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]224 select ARM_GIC
225 select CPU_V7
226 select MSM_SCM if SMP
Joel King4ebccc62011-07-22 09:43:22 -0700[diff] [blame]227 select MSM_GPIOMUX
Eric Holmberg40d21882011-09-27 09:42:03 -0600[diff] [blame]228 select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan47e5d932011-12-05 14:48:07 -0800[diff] [blame]229 select MSM_PIL
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]230 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]231 select MSM_QDSP6_CODECS
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]232 select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]233 select MULTI_IRQ_HANDLER
Praveen Chidambaram78499012011-11-01 17:15:17 -0600[diff] [blame]234 select MSM_RPM
235 select MSM_SPM_V2
236 select MSM_L2_SPM
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]237 select MSM_PM8X60 if PM
Neil Leeder814d3d32012-01-19 17:21:43 -0500[diff] [blame]238 select CPU_HAS_L2_PMU
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]239 select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel67b921d2012-04-06 10:23:27 -0700[diff] [blame]240 select CLEANCACHE
241 select QCACHE
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]242 select MIGHT_HAVE_PCI
243 select ARCH_SUPPORTS_MSI
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]244 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]245 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]246 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]247 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]248 select GENERIC_TIME_VSYSCALL
249 select USE_USER_ACCESSIBLE_TIMERS
250 select ARM_USE_USER_ACCESSIBLE_TIMERS
251 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]252 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]253
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]254config ARCH_MSM8974
255 bool "MSM8974"
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]256 select ARCH_MSM_KRAITMP
Sathish Ambley4149e842012-03-23 11:53:55 -0700[diff] [blame]257 select GPIO_MSM_V3
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]258 select ARM_GIC
259 select CPU_V7
260 select MSM_SCM if SMP
261 select MSM_GPIOMUX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]262 select MULTI_IRQ_HANDLER
Olav Hauganb800c8c2012-01-30 08:50:45 -0800[diff] [blame]263 select MSM_MULTIMEDIA_USE_ION
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]264 select MSM_PIL
Praveen Chidambaramaa9d52b2012-04-02 11:09:47 -0600[diff] [blame]265 select MSM_SPM_V2
266 select MSM_L2_SPM
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]267 select MSM_NATIVE_RESTART
268 select MSM_RESTART_V2
Praveen Chidambaram85b7b282012-04-16 13:45:15 -0600[diff] [blame]269 select MSM_PM8X60 if PM
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]270 select MAY_HAVE_SPARSE_IRQ
271 select SPARSE_IRQ
Mahesh Sivasubramaniancb668712012-04-04 13:03:25 -0600[diff] [blame]272 select MSM_RPM_SMD
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]273 select REGULATOR
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]274 select MSM_QDSP6_APRV2
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]275 select MSM_QDSP6V2_CODECS
276 select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins1c91ea72012-05-03 16:17:35 -0700[diff] [blame]277 select MSM_RPM_REGULATOR_SMD
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]278 select ARM_HAS_SG_CHAIN
Karthik Parsha404fb8f2012-07-30 19:14:05 -0700[diff] [blame]279 select MSM_RUN_QUEUE_STATS
Neeti Desai92eab922012-10-22 15:14:48 -0700[diff] [blame]280 select MEMORY_HOLE_CARVEOUT
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]281 select MSM_RPM_STATS_LOG
Karthikeyan Ramasubramanian1edce9e2012-11-08 18:26:10 -0700[diff] [blame]282 select QMI_ENCDEC
Neeti Desai1b2cb552012-11-01 21:57:36 -0700[diff] [blame]283 select DONT_MAP_HOLE_AFTER_MEMBANK0
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]284 select MSM_ULTRASOUND_B
Priyanka Mathur5d5b0a82013-01-17 10:54:29 -0800[diff] [blame]285 select MSM_LPM_TEST
Priyanka Mathur94abc462012-12-11 16:34:52 -0800[diff] [blame]286 select MSM_RPM_LOG
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]287 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]288
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]289config ARCH_APQ8084
290 bool "APQ8084"
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]291 select ARCH_MSM_KRAITMP
292 select GPIO_MSM_V3
293 select ARM_GIC
294 select CPU_V7
295 select MSM_SCM if SMP
296 select MSM_GPIOMUX
297 select MULTI_IRQ_HANDLER
298 select MSM_NATIVE_RESTART
299 select MSM_RESTART_V2
300 select MSM_PM8X60 if PM
301 select MAY_HAVE_SPARSE_IRQ
302 select SPARSE_IRQ
303 select REGULATOR
304 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko3a5ae972013-03-08 16:46:29 -0800[diff] [blame]305 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]306 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]307
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]308config ARCH_MPQ8092
309 bool "MPQ8092"
310 select ARCH_MSM_KRAITMP
311 select GPIO_MSM_V3
312 select ARM_GIC
313 select MULTI_IRQ_HANDLER
314 select CPU_V7
315 select MSM_GPIOMUX
316 select MAY_HAVE_SPARSE_IRQ
317 select SPARSE_IRQ
318 select MSM_NOPM
319
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]320config ARCH_FSM9XXX
321 bool "FSM9XXX"
322 select ARCH_MSM_SCORPION
323 select MSM_VIC
324 select CPU_V7
325 select MSM_REMOTE_SPINLOCK_LDREX
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]326 select GPIO_FSM9XXX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]327 select MULTI_IRQ_HANDLER
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]328 select MSM_DALRPC
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]329
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]330config ARCH_MSM9615
331 bool "MSM9615"
332 select ARM_GIC
Taniya Dasb241bd82012-03-19 17:58:06 +0530[diff] [blame]333 select GIC_SECURE
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]334 select ARCH_MSM_CORTEX_A5
335 select CPU_V7
Rohit Vaswani4307c842012-10-11 15:50:05 -0700[diff] [blame]336 select MIGHT_HAVE_CACHE_L2X0
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]337 select GPIO_MSM_V2
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]338 select MSM_GPIOMUX
Praveen Chidambaramab3b1c42011-08-25 08:44:05 -0600[diff] [blame]339 select MSM_RPM
Maheshkumar Sivasubramanian738b4582011-09-06 17:26:24 -0600[diff] [blame]340 select MSM_SPM_V2
Rohit Vaswanif688fa62011-10-13 18:13:10 -0700[diff] [blame]341 select MSM_NATIVE_RESTART
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]342 select REGULATOR
343 select MSM_RPM_REGULATOR
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]344 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]345 select MSM_PM8X60 if PM
Vikram Mulukutla2021c002011-12-16 12:32:59 -0800[diff] [blame]346 select MSM_XO
Olav Haugane6a0acd2012-04-05 09:29:12 -0700[diff] [blame]347 select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli9ec55e92012-01-09 14:44:59 -0800[diff] [blame]348 select MSM_QDSP6_APR
349 select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswaniead426f2012-01-05 20:24:52 -0800[diff] [blame]350 select FIQ
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]351 select ARM_HAS_SG_CHAIN
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]352
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]353config ARCH_MSM8625
354 bool "MSM8625"
355 select ARCH_MSM_CORTEX_A5
356 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]357 select GPIO_MSM_V1
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]358 select MSM_GPIOMUX
359 select ARM_GIC
360 select ARCH_MSM_CORTEXMP
361 select MULTI_IRQ_HANDLER
Trilok Soni3a453992012-03-06 18:46:22 +0530[diff] [blame]362 select ARM_TICKET_LOCKS
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]363 select MSM_RUN_QUEUE_STATS
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]364 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]365 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]366 select CPU_HAS_L2_PMU
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]367
368config ARCH_MSM9625
369 bool "MSM9625"
370 select ARM_GIC
Abhimanyu Kapur490d20c2012-06-22 17:34:20 -0700[diff] [blame]371 select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]372 select ARCH_MSM_CORTEX_A5
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]373 select CPU_V7
Abhimanyu Kapur37398ac2013-03-26 14:58:49 -0700[diff] [blame]374 select MSM_SCM
Jin Hong690e3352012-05-02 09:25:05 -0700[diff] [blame]375 select MSM_GPIOMUX
Girish Mahadevanf1c20a42012-09-19 11:44:36 -0600[diff] [blame]376 select MSM_RPM_SMD
Abhimanyu Kapur46e5e2b2012-10-02 20:45:37 -0700[diff] [blame]377 select MSM_NATIVE_RESTART
378 select MSM_RESTART_V2
Girish Mahadevan6e419562012-09-19 12:50:05 -0600[diff] [blame]379 select MSM_SPM_V2
380 select MSM_PM8X60 if PM
381 select MSM_SCM if SMP
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]382 select MULTI_IRQ_HANDLER
Rohit Vaswani61cf6ef2012-07-27 13:51:48 -0700[diff] [blame]383 select GPIO_MSM_V3
David Collins1cc6e402012-09-17 16:02:24 -0700[diff] [blame]384 select MAY_HAVE_SPARSE_IRQ
385 select SPARSE_IRQ
Mitchel Humpherys92e9b8a2012-10-08 18:12:47 -0700[diff] [blame]386 select MSM_MULTIMEDIA_USE_ION
Girish Mahadevane3be9302012-11-07 16:21:52 -0700[diff] [blame]387 select MSM_RPM_STATS_LOG
Venkat Sudhir0620e982012-11-15 16:04:36 -0800[diff] [blame]388 select MSM_QDSP6_APRV2
389 select MSM_QDSP6V2_CODECS
390 select MSM_AUDIO_QDSP6V2 if SND_SOC
Ashwin Chaugule8b459cc2012-11-26 15:20:54 -0500[diff] [blame]391 select CPU_HAS_L2_PMU
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]392 select MSM_JTAG_MM if CORESIGHT_ETM
Neeti Desai5f3b0312012-11-07 11:20:03 -0800[diff] [blame]393 select MEMORY_HOLE_CARVEOUT
Priyanka Mathurdc424552013-02-22 16:30:53 -0800[diff] [blame]394 select MSM_RPM_LOG
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]395
Abhimanyu Kapur17284802013-03-18 17:00:49 -0700[diff] [blame]396config ARCH_MSMKRYPTON
397 bool "MSMKRYPTON"
398 select ARM_GIC
399 select CPU_V7
400 select MSM_GPIOMUX
401 select MSM_RPM_SMD
402 select MSM_NATIVE_RESTART
403 select MSM_RESTART_V2
404 select MSM_SPM_V2
405 select MSM_PM8X60 if PM
406 select MULTI_IRQ_HANDLER
407 select GPIO_MSM_V3
408 select MAY_HAVE_SPARSE_IRQ
409 select SPARSE_IRQ
410
Syed Rameez Mustafa3971c142013-01-09 19:04:53 -0800[diff] [blame]411config ARCH_MSM8610
412 bool "MSM8610"
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]413 select ARM_GIC
414 select GIC_SECURE
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]415 select ARCH_MSM_CORTEXMP
416 select CPU_V7
417 select MSM_SCM if SMP
418 select MAY_HAVE_SPARSE_IRQ
419 select SPARSE_IRQ
420 select MULTI_IRQ_HANDLER
421 select GPIO_MSM_V3
422 select MSM_GPIOMUX
Hanumant Singhe4271312012-10-24 13:27:57 -0700[diff] [blame]423 select MSM_NATIVE_RESTART
424 select MSM_RESTART_V2
Arun Menon7d2f1732013-01-16 15:20:56 -0800[diff] [blame]425 select MSM_QDSP6_APRV2
426 select MSM_QDSP6V2_CODECS
427 select MSM_AUDIO_QDSP6V2 if SND_SOC
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]428 select QMI_ENCDEC
Praveen Chidambaramee7b1652012-11-29 09:52:53 -0700[diff] [blame]429 select MSM_RPM_SMD
430 select MSM_SPM_V2
431 select MSM_L2_SPM
432 select MSM_PM8X60 if PM
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]433 select MEMORY_HOLE_CARVEOUT
434 select DONT_MAP_HOLE_AFTER_MEMBANK0
435 select MSM_BUS_SCALING
Patrick Dalyd3ad9ff2012-11-06 11:07:27 -0800[diff] [blame]436 select CPU_FREQ_MSM
437 select CPU_FREQ
438 select CPU_FREQ_GOV_USERSPACE
439 select CPU_FREQ_GOV_ONDEMAND
Patrick Daly9e3fca92013-01-30 13:53:57 -0800[diff] [blame]440 select MSM_PIL
Siddharth Vermaead71842013-02-27 14:25:27 -0800[diff] [blame]441 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]442 select ARM_HAS_SG_CHAIN
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]443 select REGULATOR
444 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]445 select MSM_SPM_REGULATOR
Aparna Das258c1722013-03-28 17:20:50 -0700[diff] [blame]446 select MSM_JTAG_MM if CORESIGHT_ETM
Willie Ruande543ba2013-03-26 14:52:11 -0700[diff] [blame]447 select MSM_CPR_REGULATOR
Priyanka Mathur6e0e2112013-04-03 12:58:52 -0700[diff] [blame]448 select MSM_RPM_LOG
Priyanka Mathur6c469162013-04-03 13:04:13 -0700[diff] [blame]449 select MSM_RPM_STATS_LOG
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]450
451config ARCH_MSM8226
452 bool "MSM8226"
453 select ARM_GIC
454 select GIC_SECURE
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]455 select ARCH_MSM_CORTEXMP
456 select CPU_V7
457 select MSM_SCM if SMP
458 select MAY_HAVE_SPARSE_IRQ
459 select SPARSE_IRQ
460 select MULTI_IRQ_HANDLER
461 select GPIO_MSM_V3
462 select MSM_GPIOMUX
Syed Rameez Mustafaf1bdd712012-11-20 14:56:44 -0800[diff] [blame]463 select MSM_NATIVE_RESTART
464 select MSM_RESTART_V2
Bhalchandra Gajare4e08f632012-12-18 11:54:35 -0800[diff] [blame]465 select MSM_QDSP6_APRV2
466 select MSM_QDSP6V2_CODECS
467 select MSM_AUDIO_QDSP6V2 if SND_SOC
Karthikeyan Ramasubramaniand04c8652013-01-16 09:03:51 -0700[diff] [blame]468 select QMI_ENCDEC
Praveen Chidambarama06f60d2012-11-29 09:52:53 -0700[diff] [blame]469 select MSM_RPM_SMD
470 select MSM_SPM_V2
471 select MSM_L2_SPM
472 select MSM_PM8X60 if PM
Neeti Desaibfedbd32012-11-21 13:19:36 -0800[diff] [blame]473 select MEMORY_HOLE_CARVEOUT
474 select DONT_MAP_HOLE_AFTER_MEMBANK0
Gagan Mace1ec9522013-02-01 12:10:21 -0700[diff] [blame]475 select MSM_BUS_SCALING
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]476 select CPU_FREQ_MSM
477 select CPU_FREQ
478 select CPU_FREQ_GOV_USERSPACE
479 select CPU_FREQ_GOV_ONDEMAND
480 select MSM_PIL
481 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]482 select ARM_HAS_SG_CHAIN
David Keitelc0092e12013-03-07 12:09:48 -0800[diff] [blame]483 select REGULATOR
484 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]485 select MSM_SPM_REGULATOR
Pushkar Joshi1bea8372013-03-06 18:26:37 -0800[diff] [blame]486 select MSM_JTAG_MM if CORESIGHT_ETM
Willie Ruan679eaf32013-03-21 13:30:40 -0700[diff] [blame]487 select MSM_CPR_REGULATOR
Priyanka Mathur6e0e2112013-04-03 12:58:52 -0700[diff] [blame]488 select MSM_RPM_LOG
Priyanka Mathur6c469162013-04-03 13:04:13 -0700[diff] [blame]489 select MSM_RPM_STATS_LOG
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]490 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]491endmenu
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]492
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]493choice
494 prompt "MSM SoC Revision"
495 default MSM_SOC_REV_NONE
496config MSM_SOC_REV_NONE
497 bool "N/A"
498 select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
499 select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]500config MSM_SOC_REV_A
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]501 bool "Rev. A"
502 select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]503endchoice
504
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]505config MSM_KRAIT_TBB_ABORT_HANDLER
506 bool "Krait TBB/TBH data abort handler"
507 depends on ARCH_MSM_KRAIT
508 depends on ARM_THUMB
509 help
510 Certain early samples of the Krait processor may generate data
511 aborts for TBB / TBH instructions that fail their condition code
512 checks. Enabling this option will ignore these erroneous data aborts,
513 at the expense of a very small performance penalty.
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800[diff] [blame]514
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]515 If unsure, say N.
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]516
517config ARCH_MSM_ARM11
518 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]519
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]520config ARCH_MSM_SCORPION
521 bool
522
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]523config ARCH_MSM_KRAIT
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]524 bool
Stephen Boyd51cabbe2011-12-02 13:28:56 -0800[diff] [blame]525 select ARM_L1_CACHE_SHIFT_6
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]526
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]527config MSM_SMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]528 select HAVE_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]529 bool
530
531config ARCH_MSM_SCORPIONMP
532 select ARCH_MSM_SCORPION
533 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]534 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]535 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]536 bool
537
538config ARCH_MSM_KRAITMP
539 select ARCH_MSM_KRAIT
540 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]541 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]542 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]543 bool
544
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]545config ARCH_MSM_CORTEXMP
546 select MSM_SMP
547 bool
548
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]549config MSM_KRAIT_WFE_FIXUP
550 bool
551
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]552config MSM_RESTART_V2
553 bool
554
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]555config ARCH_MSM_CORTEX_A5
Bryan Huntsman239ef1e2011-11-23 15:09:13 -0800[diff] [blame]556 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]557
558config ARCH_MSM7X27A
559 bool
560 select MSM_DALRPC
Justin Pauporeb3a33b72011-08-23 15:30:32 -0700[diff] [blame]561 select MSM_PROC_COMM_REGULATOR
Taniya Das86e0e132011-10-19 11:32:00 +0530[diff] [blame]562 select MULTI_IRQ_HANDLER
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]563 select ARM_GIC
564 select ARCH_MSM_CORTEXMP
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]565 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]566 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]567 select CPU_HAS_L2_PMU
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]568
Gregory Beanf9f3d312010-04-30 22:06:50 -0700[diff] [blame]569config MSM_VIC
570 bool
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]571
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]572config MSM_RPM
573 bool "Resource Power Manager"
574 select MSM_MPM
575
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]576config MSM_RPM_SMD
577 depends on MSM_SMD
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]578 select MSM_MPM_OF
579 bool "RPM driver using SMD protocol"
580 help
581 RPM is the dedicated hardware engine for managing shared SoC
582 resources. This config adds driver support for using SMD as a
583 transport layer communication with RPM hardware. It also selects
584 the MSM_MPM config that programs the MPM module to monitor interrupts
585 during sleep modes.
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]586
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]587config MSM_MPM
588 bool "Modem Power Manager"
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]589 help
590 MPM is a dedicated hardware resource responsible for entering and
591 waking up from a system wide low power mode. The MPM driver tracks
592 the wakeup interrupts and configures the MPM to monitor the wakeup
593 interrupts when going to a system wide sleep mode.
594
595config MSM_MPM_OF
596 bool "Modem Power Manager"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]597 depends on OF
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]598 help
599 MPM is a dedicated hardware resource responsible for entering and
600 waking up from a system wide low power mode. The MPM driver tracks
601 the wakeup interrupts and configures the MPM to monitor the wakeup
602 interrupts when going to a system wide sleep mode. This config option
603 enables the MPM driver that supports initialization from a device
604 tree
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]605
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]606config MSM_LPM_TEST
607 bool "Low Power Mode test framework"
Priyanka Mathur3abfd442013-01-11 12:58:51 -0800[diff] [blame]608 depends on MSM_RPM || MSM_RPM_SMD
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]609 depends on MSM_PM8X60
610 help
611 LPM_TEST is a test framework that assists in exercising the low
612 power mode algorithm on MSM targets. This test framework tracks
613 notifications sent during entry/exit of the low power modes and
614 processes them to measure various stats including latency
615 measurement.
616
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]617config MSM_XO
618 bool
619
620config MSM_REMOTE_SPINLOCK_DEKKERS
621 bool
622config MSM_REMOTE_SPINLOCK_SWP
623 bool
624config MSM_REMOTE_SPINLOCK_LDREX
625 bool
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]626config MSM_REMOTE_SPINLOCK_SFPB
627 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]628config MSM_ADM3
629 bool
630
631menu "MSM Board Selection"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]632
633config MACH_HALIBUT
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]634 depends on ARCH_MSM7X01A
635 depends on MSM_STACKED_MEMORY
636 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]637 bool "Halibut Board (QCT SURF7201A)"
638 help
639 Support for the Qualcomm SURF7201A eval board.
640
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]641config MACH_MSM7201A_SURF
642 depends on ARCH_MSM7X01A
643 depends on MSM_STACKED_MEMORY
644 default y
645 bool "MSM7201A SURF"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]646 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]647 Support for the Qualcomm MSM7201A SURF eval board.
648
649config MACH_MSM7201A_FFA
650 depends on ARCH_MSM7X01A
651 depends on MSM_STACKED_MEMORY
652 default y
653 bool "MSM7201A FFA"
654 help
655 Support for the Qualcomm MSM7201A FFA eval board.
656
657config MACH_TROUT
658 depends on ARCH_MSM7X01A
659 depends on MSM_STACKED_MEMORY
660 default y
661 bool "Trout"
662
663config MACH_MSM7X27_SURF
664 depends on ARCH_MSM7X27
665 depends on !MSM_STACKED_MEMORY
666 default y
667 bool "MSM7x27 SURF"
668 help
669 Support for the Qualcomm MSM7x27 SURF eval board.
670
671config MACH_MSM7X27_FFA
672 depends on ARCH_MSM7X27
673 depends on !MSM_STACKED_MEMORY
674 default y
675 bool "MSM7x27 FFA"
676 help
677 Support for the Qualcomm MSM7x27 FFA eval board.
678
679config MACH_MSM7X27A_RUMI3
680 depends on ARCH_MSM7X27A
681 depends on !MSM_STACKED_MEMORY
682 default y
683 bool "MSM7x27A RUMI3"
684 help
685 Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
686
687config MACH_MSM7X27A_SURF
688 depends on ARCH_MSM7X27A
689 depends on !MSM_STACKED_MEMORY
690 default y
691 bool "MSM7x27A SURF"
692 help
693 Support for the Qualcomm MSM7x27A SURF.
694
695config MACH_MSM7X27A_FFA
696 depends on ARCH_MSM7X27A
697 depends on !MSM_STACKED_MEMORY
698 default y
699 bool "MSM7x27A FFA"
700 help
701 Support for the Qualcomm MSM7x27A FFA.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]702
Trilok Soni3d0f6c52011-07-26 16:06:58 +0530[diff] [blame]703config MACH_MSM7625A_SURF
704 depends on ARCH_MSM7X27A
705 depends on !MSM_STACKED_MEMORY
706 default y
707 bool "MSM7625A SURF"
708 help
709 Support for the Qualcomm MSM7625A SURF.
710
711config MACH_MSM7625A_FFA
712 depends on ARCH_MSM7X27A
713 depends on !MSM_STACKED_MEMORY
714 default y
715 bool "MSM7625A FFA"
716 help
717 Support for the Qualcomm MSM7625A FFA.
718
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]719config MACH_MSM7627A_QRD1
720 depends on ARCH_MSM7X27A
721 depends on !MSM_STACKED_MEMORY
722 default y
723 bool "MSM7627A QRD1"
724 help
Chintan Pandyab1bad0e2012-02-06 19:04:51 +0530[diff] [blame]725 Support for the Qualcomm MSM7627A Reference Design.
726
727config MACH_MSM7627A_QRD3
728 depends on ARCH_MSM7X27A
729 depends on !MSM_STACKED_MEMORY
730 default y
731 bool "MSM7627A QRD3"
732 help
733 Support for the Qualcomm MSM7627A Reference Design.
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]734
Taniya Dasc868a2e2012-01-03 10:18:47 +0530[diff] [blame]735config MACH_MSM7627A_EVB
736 depends on ARCH_MSM7X27A
737 depends on !MSM_STACKED_MEMORY
738 default y
739 bool "MSM7627A EVB"
740 help
741 Support for the Qualcomm MSM7627A Reference Design.
742
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]743config MACH_MSM8625_RUMI3
744 depends on ARCH_MSM8625
745 depends on !MSM_STACKED_MEMORY
746 default y
747 bool "MSM8625 RUMI3"
748 help
749 Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
750
Taniya Dase3027e22012-02-27 16:32:27 +0530[diff] [blame]751config MACH_MSM8625_SURF
752 depends on ARCH_MSM8625
753 depends on !MSM_STACKED_MEMORY
754 default y
755 bool "MSM8625 SURF"
756 help
757 Support for the Qualcomm MSM8625 SURF.
758
Aparna Mallavarapu9f000a72012-04-20 15:37:57 +0530[diff] [blame]759config MACH_MSM8625_FFA
760 depends on ARCH_MSM8625
761 depends on !MSM_STACKED_MEMORY
762 default y
763 bool "MSM8625 FFA"
764 help
765 Support for the Qualcomm MSM8625 FFA.
766
Chintan Pandyaf4ad4002012-02-28 19:49:03 +0530[diff] [blame]767config MACH_MSM8625_EVB
768 depends on ARCH_MSM8625
769 depends on !MSM_STACKED_MEMORY
770 default y
771 bool "MSM8625 EVB"
772 help
773 Support for the Qualcomm MSM8625 Reference Design.
774
Taniya Dasbd096542012-03-15 17:43:45 +0530[diff] [blame]775config MACH_MSM8625_QRD7
776 depends on ARCH_MSM8625
777 depends on !MSM_STACKED_MEMORY
778 default y
779 bool "MSM8625 QRD7"
780 help
781 Support for the Qualcomm MSM8625 Reference Design.
782
Aparna Mallavarapu5a326242012-05-09 19:49:02 +0530[diff] [blame]783config MACH_MSM8625_EVT
784 depends on ARCH_MSM8625
785 depends on !MSM_STACKED_MEMORY
786 default y
787 bool "MSM8625 EVT"
788 help
789 Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]790
Channagoud Kadabi2bd65c82012-10-12 15:14:23 +0530[diff] [blame]791config MACH_QRD_SKUD_PRIME
792 depends on ARCH_MSM8625
793 depends on !MSM_STACKED_MEMORY
794 default y
795 bool "MSM8625 SKUD PRIME"
796 help
797 Support for the Qualcomm MSM8625 SKUD prime Reference Design.
798 Add support for a SKUD prime reference design based on MSM8x25
799 chipset. This device is much closer to a phone than regular form
800 factor devices, with new touch, display panel and other hardware
801 configurations.
802
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]803config MACH_MSM7X30_SURF
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]804 depends on ARCH_MSM7X30
805 depends on !MSM_STACKED_MEMORY
806 default y
807 bool "MSM7x30 SURF"
808 help
809 Support for the Qualcomm MSM7x30 SURF eval board.
810
811config MACH_MSM7X30_FFA
812 depends on ARCH_MSM7X30
813 depends on !MSM_STACKED_MEMORY
814 default y
815 bool "MSM7x30 FFA"
816 help
817 Support for the Qualcomm MSM7x30 FFA eval board.
818
819config MACH_MSM7X30_FLUID
820 depends on ARCH_MSM7X30
821 depends on !MSM_STACKED_MEMORY
822 default y
823 bool "MSM7x30 FLUID"
824 help
825 Support for the Qualcomm MSM7x30 FLUID eval board.
826
827config MACH_SAPPHIRE
828 depends on ARCH_MSM7X01A
829 default n
830 bool "Sapphire"
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]831
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]832config MACH_QSD8X50_SURF
833 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]834 depends on MSM_SOC_REV_NONE
835 depends on MSM_STACKED_MEMORY
836 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]837 bool "QSD8x50 SURF"
838 help
839 Support for the Qualcomm QSD8x50 SURF eval board.
840
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]841config MACH_QSD8X50_FFA
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]842 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]843 depends on MSM_SOC_REV_NONE
844 depends on MSM_STACKED_MEMORY
845 default y
846 bool "QSD8x50 FFA"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]847 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]848 Support for the Qualcomm QSD8x50 FFA eval board.
849
850config MACH_MSM7X25_SURF
851 depends on ARCH_MSM7X25
852 depends on !MSM_STACKED_MEMORY
853 default y
854 bool "MSM7x25 SURF"
855 help
856 Support for the Qualcomm MSM7x25 SURF eval board.
857
858config MACH_MSM7X25_FFA
859 depends on ARCH_MSM7X25
860 depends on !MSM_STACKED_MEMORY
861 default y
862 bool "MSM7x25 FFA"
863 help
864 Support for the Qualcomm MSM7x25 FFA eval board.
865
866config MACH_MSM8X55_SURF
867 depends on ARCH_MSM7X30
868 depends on !MSM_STACKED_MEMORY
869 default y
870 bool "MSM8X55 SURF"
871 help
872 Support for the Qualcomm MSM8x55 SURF eval board.
873
874config MACH_MSM8X55_FFA
875 depends on ARCH_MSM7X30
876 depends on !MSM_STACKED_MEMORY
877 default y
878 bool "MSM8X55 FFA"
879 help
880 Support for the Qualcomm MSM8x55 FFA eval board.
881
882config MACH_MSM8X55_SVLTE_FFA
883 depends on ARCH_MSM7X30
884 depends on !MSM_STACKED_MEMORY
885 default y
886 bool "MSM8X55 SVLTE FFA"
887 help
888 Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
889
890config MACH_MSM8X55_SVLTE_SURF
891 depends on ARCH_MSM7X30
892 depends on !MSM_STACKED_MEMORY
893 default y
894 bool "MSM8X55 SVLTE SURF"
895 help
896 Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]897
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]898config MACH_MSM8X60_SURF
899 depends on ARCH_MSM8X60
900 default n
901 bool "MSM8x60 SURF"
902 help
903 Support for the Qualcomm MSM8x60 SURF eval board.
904
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]905config MACH_MSM8X60_FFA
906 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]907 default n
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]908 bool "MSM8x60 FFA"
909 help
910 Support for the Qualcomm MSM8x60 FFA eval board.
911
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]912config MACH_MSM8X60_FLUID
913 depends on ARCH_MSM8X60
914 default n
915 bool "MSM8x60 FLUID"
916 help
917 Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
918 8x60 target which has a form factor that is much closer to that
919 of a phone than other targets. It also has a new display and
920 touchscreen controller.
921
922config MACH_MSM8X60_FUSION
923 depends on ARCH_MSM8X60
924 default n
925 bool "MSM8x60 FUSION"
926 help
927 Support for the Qualcomm MSM8x60 Fusion SURF device.
928
929config MACH_MSM8X60_FUSN_FFA
930 depends on ARCH_MSM8X60
931 default n
932 bool "MSM8x60 FUSN FFA"
933 help
934 Support for the Qualcomm MSM8x60 Fusion FFA device.
935
Zhang Chang Kenef05b172011-07-27 15:28:13 -0400[diff] [blame]936config MACH_MSM8X60_DRAGON
937 depends on ARCH_MSM8X60
938 default n
939 bool "MSM8x60 DRAGON"
940 help
941 Support for the Qualcomm MSM8x60 Dragon board.
942
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]943config MACH_MSM8960_CDP
944 depends on ARCH_MSM8960
945 bool "MSM8960 CDP"
946 help
947 Support for the Qualcomm MSM8960 CDP device.
948
949config MACH_MSM8960_MTP
950 depends on ARCH_MSM8960
951 bool "MSM8960 MTP"
952 help
953 Support for the Qualcomm MSM8960 MTP device.
954
955config MACH_MSM8960_FLUID
956 depends on ARCH_MSM8960
957 bool "MSM8960 FLUID"
958 help
959 Support for the Qualcomm MSM8960 FLUID device.
960
Amir Samuelov0d1f8ae2011-07-28 11:13:58 +0300[diff] [blame]961config MACH_MSM8960_LIQUID
962 depends on ARCH_MSM8960
963 bool "MSM8960 LIQUID"
964 help
965 Support for the Qualcomm MSM8960 LIQUID device.
966
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]967config MACH_MSM8930_CDP
968 depends on ARCH_MSM8930
969 bool "MSM8930 CDP"
970 help
971 Support for the Qualcomm MSM8930 CDP device.
972
973config MACH_MSM8930_MTP
974 depends on ARCH_MSM8930
975 bool "MSM8930 MTP"
976 help
977 Support for the Qualcomm MSM8930 MTP device.
978
979config MACH_MSM8930_FLUID
980 depends on ARCH_MSM8930
981 bool "MSM8930 FLUID"
982 help
983 Support for the Qualcomm MSM8930 FLUID device.
984
Stepan Moskovchenko8768eff2011-12-01 18:55:07 -0800[diff] [blame]985config MACH_MSM8627_CDP
986 depends on ARCH_MSM8930
987 bool "MSM8627 CDP"
988 help
989 Support for the Qualcomm MSM8627 CDP device.
990
991config MACH_MSM8627_MTP
992 depends on ARCH_MSM8930
993 bool "MSM8627 MTP"
994 help
995 Support for the Qualcomm MSM8627 MTP device.
996
Rohit Vaswania8e7a832011-09-28 21:00:05 -0700[diff] [blame]997config MACH_MSM9615_CDP
998 depends on ARCH_MSM9615
999 bool "MSM9615 CDP"
1000 help
1001 Support for the Qualcomm MSM9615 CDP device.
1002
1003config MACH_MSM9615_MTP
1004 depends on ARCH_MSM9615
1005 bool "MSM9615 MTP"
1006 help
1007 Support for the Qualcomm MSM9615 MTP device.
1008
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1009config MSM_USE_TSIF1
1010 depends on ARCH_MSM8X60
1011 bool "MSM8x60 use TSIF1"
1012 help
1013 Selects TSIF1 core to be used rather than TSIF0.
1014 The two TSIF cores share the same DM configuration
1015 so they cannot be used simultaneously.
1016
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1017config MACH_APQ8064_CDP
1018 depends on ARCH_APQ8064
1019 bool "APQ8064 CDP"
1020 help
1021 Support for the Qualcomm APQ8064 CDP device.
1022
Rohit Vaswani4375c802013-01-09 13:38:19 -0800[diff] [blame]1023config MACH_FSM8064_EP
1024 depends on ARCH_APQ8064
1025 bool "FSM8064 EP"
1026 help
1027 Support for the Qualcomm FSM8064 EP device.
1028 This board also known as Femto development platform (FDP)
1029 is based on APQ8064 chipset. This board does not support
1030 keyboard, display or multimedia.
1031
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1032config MACH_APQ8064_MTP
1033 depends on ARCH_APQ8064
1034 bool "APQ8064 MTP"
1035 help
1036 Support for the Qualcomm APQ8064 MTP device.
1037
1038config MACH_APQ8064_LIQUID
1039 depends on ARCH_APQ8064
1040 bool "APQ8064 LIQUID"
1041 help
1042 Support for the Qualcomm APQ8064 LIQUID device.
1043
Joel King064bbf82012-04-01 13:23:39 -0700[diff] [blame]1044config MACH_MPQ8064_CDP
1045 depends on ARCH_APQ8064
1046 bool "MPQ8064 CDP"
1047 help
1048 Support for the Qualcomm MPQ8064 CDP device.
1049
Joel King11ca8202012-02-13 16:19:03 -0800[diff] [blame]1050config MACH_MPQ8064_HRD
1051 depends on ARCH_APQ8064
1052 bool "MPQ8064 HRD"
1053 help
1054 Support for the Qualcomm MPQ8064 HRD device.
1055
1056config MACH_MPQ8064_DTV
1057 depends on ARCH_APQ8064
1058 bool "MPQ8064 DTV"
1059 help
1060 Support for the Qualcomm MPQ8064 DTV device.
1061
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1062config MACH_FSM9XXX_SURF
1063 depends on ARCH_FSM9XXX
1064 depends on !MSM_STACKED_MEMORY
1065 default y
1066 bool "FSM9XXX SURF"
1067 help
1068 Support for the Qualcomm FSM9xxx femtocell
1069 chipset based SURF evaluation board and
1070 FFA board.
1071
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]1072endmenu
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1073
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1074config MSM_STACKED_MEMORY
1075 bool "Stacked Memory"
1076 default y
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1077 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1078 This option is used to indicate the presence of on-die stacked
1079 memory. When present this memory bank is used for a high speed
1080 shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1081
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1082config PHYS_OFFSET
1083 hex
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]1084 default "0x40800000" if ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1085 default "0x80200000" if ARCH_APQ8064
1086 default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]1087 default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1088 default "0x00000000" if ARCH_MSM8974
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1089 default "0x00000000" if ARCH_APQ8084
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1090 default "0x00000000" if ARCH_MPQ8092
Syed Rameez Mustafa1c99fd32013-03-05 22:11:17 -0800[diff] [blame]1091 default "0x00000000" if ARCH_MSM8226
1092 default "0x00000000" if ARCH_MSM8610
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1093 default "0x10000000" if ARCH_FSM9XXX
Abhimanyu Kapur20ac2ad2012-09-25 04:23:59 -0700[diff] [blame]1094 default "0x00200000" if ARCH_MSM9625
Abhimanyu Kapur17284802013-03-18 17:00:49 -0700[diff] [blame]1095 default "0x00200000" if ARCH_MSMKRYPTON
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1096 default "0x00200000" if !MSM_STACKED_MEMORY
1097 default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
1098 default "0x20000000" if ARCH_QSD8X50
1099 default "0x40200000" if ARCH_MSM8X60
1100 default "0x10000000"
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1101
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1102config KERNEL_MSM_CONTIG_MEM_REGION
1103 bool "Enable in-kernel contiguous memory region"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1104 default y if ARCH_MSM8X60
Laura Abbottc1fa75b2013-04-02 14:29:53 -0700[diff] [blame]1105 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1106 help
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1107 Enable the in-kernel contiguous memory allocator. Sets up a
1108 region of physically contiguous memory. This memory is
1109 reserved during initialization, and can be used
1110 generically.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1111
1112config KERNEL_PMEM_SMI_REGION
1113 bool "Enable in-kernel PMEM region for SMI"
1114 default y if ARCH_MSM8X60
1115 depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM))
1116 help
1117 Enable the in-kernel PMEM allocator to use SMI memory.
1118
1119config PMEM_GPU0
1120 bool "Enable PMEM GPU0 region"
1121 default y
1122 depends on ARCH_QSD8X50 && ANDROID_PMEM
1123 help
1124 Enable the PMEM GPU0 device on SMI Memory.
1125
1126config MSM_AMSS_VERSION
1127 int
1128 default 6210 if MSM_AMSS_VERSION_6210
1129 default 6220 if MSM_AMSS_VERSION_6220
1130 default 6225 if MSM_AMSS_VERSION_6225
1131
1132choice
1133 prompt "AMSS modem firmware version"
1134
1135 default MSM_AMSS_VERSION_6225
1136
1137 config MSM_AMSS_VERSION_6210
1138 bool "6.2.10"
1139
1140 config MSM_AMSS_VERSION_6220
1141 bool "6.2.20"
1142
1143 config MSM_AMSS_VERSION_6225
1144 bool "6.2.20 + New ADSP"
1145endchoice
Stepan Moskovchenko2607b0a2010-11-15 17:46:10 -0800[diff] [blame]1146
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1147config MSM_HAS_DEBUG_UART_HS
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]1148 bool
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1149 help
1150 Say Y here if high speed MSM UART is present.
1151
1152config MSM_HAS_DEBUG_UART_HS_V14
1153 bool
1154 select MSM_HAS_DEBUG_UART_HS
1155 help
1156 Say Y here if high speed MSM UART v1.4 is present.
1157
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1158config MSM_DEBUG_UART_PHYS
1159 hex
1160 default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
1161 default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
1162 default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
1163 default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
1164 default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
1165 default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
1166 default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
1167 default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
1168
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1169choice
1170 prompt "Debug UART"
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1171 depends on DEBUG_LL
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1172
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1173 config DEBUG_MSM_UART1
1174 bool "Kernel low-level debugging messages via MSM UART1"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1175 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1176 help
1177 Say Y here if you want the debug print routines to direct
1178 their output to the first serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1179
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1180 config DEBUG_MSM_UART2
1181 bool "Kernel low-level debugging messages via MSM UART2"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1182 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1183 help
1184 Say Y here if you want the debug print routines to direct
1185 their output to the second serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1186
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1187 config DEBUG_MSM_UART3
1188 bool "Kernel low-level debugging messages via MSM UART3"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1189 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1190 help
1191 Say Y here if you want the debug print routines to direct
1192 their output to the third serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1193
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1194 config DEBUG_MSM8660_UART
1195 bool "Kernel low-level debugging messages via MSM 8660 UART"
1196 depends on ARCH_MSM8X60
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1197 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1198 help
1199 Say Y here if you want the debug print routines to direct
1200 their output to the serial port on MSM 8660 devices.
Steve Mucklec8aabae2010-04-21 16:20:27 -0700[diff] [blame]1201
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1202 config DEBUG_MSM8960_UART
1203 bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1204 depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1205 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1206 help
1207 Say Y here if you want the debug print routines to direct
1208 their output to the serial port on MSM 8960 devices.
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1209
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1210 config DEBUG_MSM8930_UART
1211 bool "Kernel low-level debugging messages via MSM 8930 UART"
1212 depends on ARCH_MSM8930 && DEBUG_LL
1213 select MSM_HAS_DEBUG_UART_HS
1214 help
1215 Say Y here if you want the debug print routines to direct
1216 their output to the serial port on MSM 8930 devices.
1217
1218 config DEBUG_APQ8064_UART
1219 bool "Kernel low-level debugging messages via APQ 8064 UART"
1220 depends on ARCH_APQ8064 && DEBUG_LL
1221 select MSM_HAS_DEBUG_UART_HS
1222 help
1223 Say Y here if you want the debug print routines to direct
1224 their output to the serial port on APQ 8064 devices.
1225
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1226 config DEBUG_MSM8974_UART
1227 bool "Kernel low-level debugging messages via MSM 8974 UART"
1228 depends on ARCH_MSM8974
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1229 select MSM_HAS_DEBUG_UART_HS_V14
1230 help
1231 Say Y here if you want the debug print routines to direct
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1232 their output to the serial port on MSM 8974 devices.
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1233
1234 config DEBUG_MPQ8092_UART
1235 bool "Kernel low-level debugging messages via MPQ8092 UART"
1236 depends on ARCH_MPQ8092
1237 select MSM_HAS_DEBUG_UART_HS_V14
1238 help
1239 Say Y here if you want the debug print routines to direct
1240 their output to the serial port on MPQ8092 devices.
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1241
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1242 config DEBUG_APQ8084_UART
1243 bool "Kernel low-level debugging messages via APQ8084 UART"
1244 depends on ARCH_APQ8084
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1245 select MSM_HAS_DEBUG_UART_HS_V14
1246 help
1247 Say Y here if you want the debug print routines to direct
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1248 their output to the serial port on APQ8084 devices.
Stephen Boydb9dedc62013-04-19 15:29:30 -0700[diff] [blame^]1249
1250 config DEBUG_MSM9625_UART
1251 bool "Kernel low-level debugging messages via MSM9625 UART"
1252 depends on ARCH_MSM9625
1253 select MSM_HAS_DEBUG_UART_HS_V14
1254 help
1255 Say Y here if you want the debug print routines to direct
1256 their output to the serial port on MSM9625 devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1257endchoice
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1258
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1259choice
1260 prompt "Default Timer"
1261 default MSM7X00A_USE_GP_TIMER
1262
1263 config MSM7X00A_USE_GP_TIMER
1264 bool "GP Timer"
1265 help
1266 Low resolution timer that allows power collapse from idle.
1267
1268 config MSM7X00A_USE_DG_TIMER
1269 bool "DG Timer"
1270 help
1271 High resolution timer.
1272endchoice
1273
1274choice
1275 prompt "Suspend sleep mode"
1276 default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1277 help
1278 Allows overriding the sleep mode used. Leave at power
1279 collapse suspend unless the arm9 image has problems.
1280
1281 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1282 bool "Power collapse suspend"
1283 help
1284 Lowest sleep state. Returns through reset vector.
1285
1286 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1287 bool "Power collapse"
1288 help
1289 Sleep state that returns through reset vector.
1290
1291 config MSM7X00A_SLEEP_MODE_APPS_SLEEP
1292 bool "Apps Sleep"
1293
1294 config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1295 bool "Ramp down cpu clock and wait for interrupt"
1296
1297 config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1298 bool "Wait for interrupt"
1299endchoice
1300
1301config MSM7X00A_SLEEP_MODE
1302 int
1303 default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1304 default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1305 default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
1306 default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1307 default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1308
1309choice
1310 prompt "Idle sleep mode"
1311 default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1312 help
1313 Allows overriding the sleep mode used from idle. Leave at power
1314 collapse suspend unless the arm9 image has problems.
1315
1316 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1317 bool "Power collapse suspend"
1318 help
1319 Lowest sleep state. Returns through reset vector.
1320
1321 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1322 bool "Power collapse"
1323 help
1324 Sleep state that returns through reset vector.
1325
1326 config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1327 bool "Apps Sleep"
1328
1329 config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1330 bool "Ramp down cpu clock and wait for interrupt"
1331
1332 config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1333 bool "Wait for interrupt"
1334endchoice
1335
1336config MSM7X00A_IDLE_SLEEP_MODE
1337 int
1338 default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1339 default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1340 default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1341 default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1342 default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1343
1344config MSM7X00A_IDLE_SLEEP_MIN_TIME
1345 int "Minimum idle time before sleep"
1346 default 20000000
1347 help
1348 Minimum idle time in nanoseconds before entering low power mode.
1349
1350config MSM7X00A_IDLE_SPIN_TIME
1351 int "Idle spin time before cpu ramp down"
1352 default 80000
1353 help
1354 Spin time in nanoseconds before ramping down cpu clock and entering
1355 any low power state.
1356
1357menuconfig MSM_IDLE_STATS
1358 bool "Collect idle statistics"
1359 default y
1360 help
1361 Collect idle statistics and export them in proc/msm_pm_stats.
1362
1363if MSM_IDLE_STATS
1364
1365config MSM_IDLE_STATS_FIRST_BUCKET
1366 int "First bucket time"
1367 default 62500
1368 help
1369 Upper time limit in nanoseconds of first bucket.
1370
1371config MSM_IDLE_STATS_BUCKET_SHIFT
1372 int "Bucket shift"
1373 default 2
1374
1375config MSM_IDLE_STATS_BUCKET_COUNT
1376 int "Bucket count"
1377 default 10
1378
1379config MSM_SUSPEND_STATS_FIRST_BUCKET
1380 int "First bucket time for suspend"
1381 default 1000000000
1382 help
1383 Upper time limit in nanoseconds of first bucket of the
1384 histogram. This is for collecting statistics on suspend.
1385
1386endif # MSM_IDLE_STATS
1387
1388config CPU_HAS_L2_PMU
1389 bool "L2CC PMU Support"
1390 help
1391 Select this if the L2 cache controller has a Performance Monitoring Unit.
1392
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1393config HTC_HEADSET
1394 tristate "HTC 2 Wire detection driver"
1395 default n
1396 help
1397 Provides support for detecting HTC 2 wire devices, such as wired
1398 headset, on the trout platform. Can be used with the msm serial
1399 debugger, but not with serial console.
1400
1401config TROUT_BATTCHG
1402 depends on MACH_TROUT && POWER_SUPPLY
1403 default y
1404 bool "Trout battery / charger driver"
1405
1406config HTC_PWRSINK
1407 depends on MSM_SMD
1408 default n
1409 bool "HTC Power Sink Driver"
1410
1411config QSD_SVS
1412 bool "QSD Static Voltage Scaling"
1413 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1414 default y
1415 select TPS65023
1416 help
1417 Enables static voltage scaling using the TPS65023 PMIC.
1418
1419config QSD_PMIC_DEFAULT_DCDC1
1420 int "PMIC default output voltage"
1421 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1422 default 1250
1423 help
1424 This is the PMIC voltage at Linux kernel boot.
1425
1426config MSM_FIQ_SUPPORT
1427 default y
1428 bool "Enable installation of an FIQ handler."
1429
1430config MSM_SERIAL_DEBUGGER
1431 select MSM_FIQ_SUPPORT
1432 select KERNEL_DEBUGGER_CORE
1433 default n
1434 bool "FIQ Mode Serial Debugger"
1435 help
1436 The FIQ serial debugger can accept commands even when the
1437 kernel is unresponsive due to being stuck with interrupts
1438 disabled. Depends on the kernel debugger core in drivers/misc.
1439
1440config MSM_SERIAL_DEBUGGER_CONSOLE
1441 depends on MSM_SERIAL_DEBUGGER
1442 default n
1443 bool "Console on FIQ Serial Debugger port"
1444 help
1445 Enables a console so that printk messages are displayed on
1446 the debugger serial port as the occur.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1447
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1448config MSM_PROC_COMM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1449 default y
1450 bool "Proc-Comm RPC Interface"
1451 help
1452 Enables a lightweight communications interface to the
1453 baseband processor.
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1454
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1455config MSM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1456 bool "MSM Shared Memory Driver (SMD)"
1457 help
1458 Support for the shared memory interface between the apps
1459 processor and the baseband processor. Provides access to
1460 the "shared heap", as well as virtual serial channels
1461 used to communicate with various services on the baseband
1462 processor.
1463
1464choice
1465 prompt "MSM Shared memory interface version"
1466 depends on MSM_SMD
1467 default MSM_SMD_PKG3 if ARCH_MSM_ARM11
1468 default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
1469
1470 config MSM_SMD_PKG3
1471 bool
1472 prompt "Package 3"
1473
1474 config MSM_SMD_PKG4
1475 bool
1476 prompt "Package 4"
1477endchoice
1478
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]1479config MSM_PCIE
1480 bool "MSM PCIe Controller driver"
1481 depends on PCI && PCI_MSI
1482 help
1483 Enables the PCIe functionality by configures PCIe core on
1484 MSM chipset and by enabling the ARM PCI framework extension.
1485
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1486config MSM_RPC_SDIO_XPRT
1487 depends on MSM_SDIO_AL
1488 default y
1489 bool "MSM SDIO XPRT Layer"
1490 help
1491 SDIO Transport Layer for RPC Rouer
1492
1493config MSM_RPC_SDIO_DEBUG
1494 depends on MSM_RPC_SDIO_XPRT
1495 default y
1496 bool "MSM SDIO XPRT debug support"
1497 help
1498 Support for debugging SDIO XPRT
1499
1500config MSM_SMD_DEBUG
1501 depends on MSM_SMD
1502 default y
1503 bool "MSM SMD debug support"
1504 help
1505 Support for debugging the SMD for communication
1506 between the ARM9 and ARM11
1507
1508config MSM_SDIO_AL
1509 depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
1510 default y
1511 tristate "SDIO-Abstraction-Layer"
1512 help
1513 Support MSM<->MDM Communication over SDIO bus.
1514 MDM SDIO-Client should have pipes support.
1515
1516config MSM_SDIO_DMUX
1517 bool "SDIO Data Mux Driver"
1518 depends on MSM_SDIO_AL
1519 default n
1520 help
1521 Support Muxed Data Channels over SDIO interface.
1522
1523config MSM_BAM_DMUX
1524 bool "BAM Data Mux Driver"
1525 depends on SPS
1526 default n
1527 help
1528 Support Muxed Data Channels over BAM interface.
1529 BAM has a limited number of pipes. This driver
1530 provides a means to support more logical channels
1531 via muxing than BAM could without muxing.
1532
1533config MSM_N_WAY_SMD
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1534 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1535 default y
1536 bool "MSM N-WAY SMD support"
1537 help
1538 Supports APPS-QDSP SMD communication along with
1539 normal APPS-MODEM SMD communication.
1540
1541config MSM_N_WAY_SMSM
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1542 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1543 default y
1544 bool "MSM N-WAY SMSM support"
1545 help
1546 Supports APPS-QDSP SMSM communication along with
1547 normal APPS-MODEM SMSM communication.
1548
Eric Holmberg6275b602012-11-19 13:05:04 -0700[diff] [blame]1549config MSM_SMP2P
1550 bool "SMSM Point-to-Point (SMP2P)"
1551 depends on MSM_SMD
1552 help
1553 Provide point-to-point remote signaling support.
1554 SMP2P enables transferring 32-bit values between
1555 the local and a remote system using shared
1556 memory and interrupts. A client can open multiple
1557 32-bit values by specifying a unique string and
1558 remote processor ID.
1559
1560config MSM_SMP2P_TEST
1561 bool "SMSM Point-to-Point Test"
1562 depends on MSM_SMP2P
1563 help
1564 Enables loopback and unit testing support for
1565 SMP2P. Loopback support is used by other
1566 processors to do unit testing. Unit tests
1567 are used to verify the local and remote
1568 implementations.
1569
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1570config MSM_RESET_MODEM
1571 tristate "Reset Modem Driver"
1572 depends on MSM_SMD
1573 default m
1574 help
1575 Allows the user to reset the modem through a device node.
1576
1577config MSM_SMD_LOGGING
1578 depends on MSM_SMD
1579 default y
1580 bool "MSM Shared Memory Logger"
1581 help
1582 This option exposes the shared memory logger at /dev/smem_log
1583 and a debugfs node named smem_log.
1584
1585 If in doubt, say yes.
1586
Karthikeyan Ramasubramaniane1f4f732011-08-08 13:34:47 -0600[diff] [blame]1587config MSM_IPC_LOGGING
1588 bool "MSM Debug Logging for IPC Drivers"
1589 help
1590 This option allows the debug logging for IPC Drivers.
1591
1592 If in doubt, say no.
1593
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1594config MSM_SMD_NMEA
1595 bool "NMEA GPS Driver"
1596 depends on MSM_SMD
1597 default y
1598 help
1599 Enable this to support the NMEA GPS device.
1600
1601 If in doubt, say yes.
1602
1603config MSM_SDIO_TTY
1604 bool "SDIO TTY Driver"
1605 depends on MSM_SDIO_AL
1606 default n
1607 help
1608 Provides a TTY driver SDIO TTY
1609 This driver can be used by user space
1610 applications for passing data through the
1611 SDIO interface.
1612
1613config MSM_SMD_TTY
1614 bool "SMD TTY Driver"
1615 depends on MSM_SMD
1616 default y
1617 help
1618 Provides TTY interfaces to interact with the modem.
1619
1620 If in doubt, say yes.
1621
1622config MSM_SMD_QMI
1623 bool "SMD QMI Driver"
1624 depends on MSM_SMD
1625 default y
1626 help
1627 Manages network data connections.
1628
1629 If in doubt, say yes.
1630
1631config MSM_SMD_PKT
1632 bool "SMD Packet Driver"
1633 depends on MSM_SMD
1634 default y
1635 help
1636 Provides a binary SMD non-muxed packet port interface.
1637
1638 If in doubt, say yes.
1639
1640config MSM_SDIO_CMUX
1641 bool "SDIO CMUX Driver"
1642 depends on MSM_SDIO_AL
1643 default n
1644 help
1645 Provides a Muxed port interface over SDIO QMI
1646
1647config MSM_DSPS
1648 bool "Sensors DSPS driver"
1649 depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
1650 default n
1651 help
1652 Provides user-space interface to the sensors manager
1653 to turn on/off the Sensors Processor system clocks.
1654 It is the DSPS responsibility to turn on/off the sensors
1655 themself.
1656 The number of clocks and their name may vary between targets.
1657 It also triggers the PIL to load the DSPS firmware.
1658
1659config MSM_SDIO_CTL
1660 bool "SDIO CTL Driver"
1661 depends on MSM_SDIO_CMUX
1662 default n
1663 help
1664 Provides a binary SDIO control port interface.
1665
1666config MSM_ONCRPCROUTER
1667 depends on MSM_SMD
1668 default n
1669 bool "MSM ONCRPC router support"
1670 help
1671 Support for the MSM ONCRPC router for communication between
1672 the ARM9 and ARM11
1673
1674config MSM_IPC_ROUTER
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1675 depends on NET
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1676 default n
1677 bool "MSM IPC Router support"
1678 help
1679 Support for the MSM IPC Router for communication between
1680 the APPs and the MODEM
1681
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1682config MSM_IPC_ROUTER_SMD_XPRT
1683 depends on MSM_SMD
1684 depends on MSM_IPC_ROUTER
1685 default n
1686 bool "MSM SMD XPRT Layer"
1687 help
1688 SMD Transport Layer for IPC Router
1689
Karthikeyan Ramasubramanian5b502d3642012-09-23 22:23:36 -0600[diff] [blame]1690config MSM_IPC_ROUTER_SECURITY
1691 depends on MSM_IPC_ROUTER
1692 bool "MSM IPC Router Security support"
1693 help
1694 This feature of IPC Router will enforce security rules
1695 configured by a security script from the user-space. IPC Router
1696 once configured with the security rules will ensure that the
1697 sender of the message to a service belongs to the relevant
1698 Linux group as configured by the security script.
1699
Karthikeyan Ramasubramanianfec77ff2012-10-26 20:03:26 -0600[diff] [blame]1700config MSM_QMI_INTERFACE
1701 depends on MSM_IPC_ROUTER
1702 depends on QMI_ENCDEC
1703 default n
1704 bool "MSM QMI Interface Library"
1705 help
1706 Library to send and receive QMI messages over IPC Router.
1707 This library provides interface functions to the kernel drivers
1708 to perform QMI message marshaling and transport them over IPC
1709 Router.
1710
Karthikeyan Ramasubramaniana9859e82012-07-12 13:10:42 -0600[diff] [blame]1711config MSM_TEST_QMI_CLIENT
1712 depends on MSM_QMI_INTERFACE
1713 bool "MSM TEST QMI CLIENT"
1714 help
1715 The sample QMI client provides a test code for QMI usage. The
1716 test_service client driver uses QMI interface library to send
1717 and receive QMI messages over IPC Router. The test code sends
1718 a synchronous QMI request to the test_service and handles the
1719 QMI responses.
1720
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1721config MSM_ONCRPCROUTER_DEBUG
1722 depends on MSM_ONCRPCROUTER
1723 default y
1724 bool "MSM debug ONCRPC router support"
1725 help
1726 Support for debugging the ONCRPC router for communication
1727 between the ARM9 and ARM11
1728
1729config MSM_RPC_LOOPBACK_XPRT
1730 depends on MSM_ONCRPCROUTER
1731 default n
1732 bool "MSM RPC local routing support"
1733 help
1734 Support for routing RPC messages between APPS clients
1735 and APPS servers. Helps in testing APPS RPC framework.
1736
1737config MSM_RPCSERVER_TIME_REMOTE
1738 depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
1739 default y
1740 bool "Time remote RPC server"
1741 help
1742 The time remote server receives notification of time bases and
1743 reports these events to registered callback functions.
1744
1745config MSM_RPCSERVER_WATCHDOG
1746 depends on MSM_ONCRPCROUTER
1747 default y
1748 bool "Watchdog RPC server"
1749 help
1750 The dog_keepalive server handles watchdog events.
1751
1752config MSM_RPC_WATCHDOG
1753 depends on MSM_ONCRPCROUTER
1754 default n
1755 bool "Watchdog RPC client"
1756 help
1757 The dog_keepalive client module.
1758
1759config MSM_RPC_PING
1760 depends on MSM_ONCRPCROUTER && DEBUG_FS
1761 default m
1762 bool "MSM rpc ping"
1763 help
1764 Implements MSM rpc ping test module.
1765
1766config MSM_RPC_PROC_COMM_TEST
1767 depends on DEBUG_FS && MSM_PROC_COMM
1768 default m
1769 bool "MSM rpc proc comm test"
1770 help
1771 Implements MSM rpc proc comm test module.
1772
1773config MSM_RPC_OEM_RAPI
1774 depends on MSM_ONCRPCROUTER
1775 default m
1776 bool "MSM oem rapi"
1777 help
1778 Implements MSM oem rapi client module.
1779
1780config MSM_RPCSERVER_HANDSET
1781 depends on MSM_ONCRPCROUTER
1782 default y
1783 bool "Handset events RPC server"
1784 help
1785 Support for receiving handset events like headset detect,
1786 headset switch and clamshell state.
1787
1788config MSM_RMT_STORAGE_CLIENT
1789 depends on (ARCH_MSM && MSM_ONCRPCROUTER)
1790 default n
1791 bool "Remote Storage RPC client"
1792 help
1793 Provide RPC mechanism for remote processors to access storage
1794 device on apps processor.
1795
1796config MSM_RMT_STORAGE_CLIENT_STATS
1797 depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
1798 default n
1799 bool "Remote storage RPC client performance statistics"
1800 help
1801 Collects performance statistics and shows this information
1802 through a debugfs file rmt_storage_stats.
1803
1804config MSM_SDIO_SMEM
1805 depends on MSM_SDIO_AL
1806 default n
1807 bool "SDIO SMEM for remote storage"
1808 help
1809 Copies data from remote MDM9K memory to local MSM8x60
1810 memory. Used by remote storage client to shadow
1811 MDM9K filesystem.
1812
1813config MSM_DALRPC
1814 bool "DAL RPC support"
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]1815 default n
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1816 help
1817 Supports RPC calls to DAL devices on remote processor cores.
1818
1819config MSM_DALRPC_TEST
1820 tristate "DAL RPC test module"
1821 depends on (MSM_DALRPC && DEBUG_FS)
1822 default m
1823 help
1824 Exercises DAL RPC calls to QDSP6.
1825
1826if CPU_FREQ_MSM
1827
1828config MSM_CPU_FREQ_SET_MIN_MAX
1829 bool "Set Min/Max CPU frequencies."
1830 default n
1831 help
1832 Allow setting min and max CPU frequencies. Sysfs can be used
1833 to override these values.
1834
1835config MSM_CPU_FREQ_MAX
1836 int "Max CPU Frequency"
1837 depends on MSM_CPU_FREQ_SET_MIN_MAX
1838 default 384000
1839
1840config MSM_CPU_FREQ_MIN
1841 int "Min CPU Frequency"
1842 depends on MSM_CPU_FREQ_SET_MIN_MAX
1843 default 245760
1844
1845endif # CPU_FREQ_MSM
1846
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1847config MSM_AVS_HW
1848 bool "Enable Adaptive Voltage Scaling (AVS)"
1849 default n
1850 help
1851 Enable AVS hardware to fine tune voltage at each frequency. The
1852 AVS hardware blocks associated with each Qualcomm ARMv7 cores can
1853 fine tune the voltages based on the feedback from the ring
1854 oscillators.
1855
1856config MSM_HW3D
1857 tristate "MSM Hardware 3D Register Driver"
1858 depends on ANDROID_PMEM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1859 help
1860 Provides access to registers needed by the userspace OpenGL|ES
1861 library.
1862
1863config MSM_ADSP
1864 depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
1865 tristate "MSM ADSP driver"
1866 depends on ANDROID_PMEM
1867 default y
1868 help
1869 Provides access to registers needed by the userspace aDSP library.
1870
1871config ADSP_RPC_VER
1872 hex
1873 default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
1874 default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
1875 depends on MSM_ADSP
1876 help
1877 Select proper ADSP RPC version
1878choice
1879 prompt "ADSP RPC version"
1880
1881 default AMSS_7X25_VERSION_2009
1882
1883 config AMSS_7X25_VERSION_2009
1884 bool "2.0.09"
1885
1886 config AMSS_7X25_VERSION_2008
1887 bool "2.0.08"
1888endchoice
1889
1890config MSM7KV2_AUDIO
1891 bool "MSM7K v2 audio"
1892 depends on (ARCH_MSM7X30 && ANDROID_PMEM)
1893 default y
1894 help
1895 Enables QDSP5V2-based audio drivers for audio playbacks and
1896 voice call.
1897
1898config MSM_ADSP_REPORT_EVENTS
1899 bool "Report modem events from the DSP"
1900 default y
1901 depends on (MSM_ADSP || MSM7KV2_AUDIO)
1902 help
1903 Normally, only messages from the aDSP are reported to userspace.
1904 With this option, we report events from the aDSP as well.
1905
1906config MSM_QDSP6
1907 tristate "QDSP6 support"
1908 depends on ARCH_QSD8X50 && ANDROID_PMEM
1909 default y
1910 help
1911 Enable support for qdsp6. This provides audio and video functionality.
1912
1913config MSM8X60_AUDIO
1914 tristate "MSM8X60 audio support"
1915 depends on ARCH_MSM8X60 && ANDROID_PMEM
1916 default y
1917 help
1918 Enable support for qdsp6v2. This provides audio functionality.
1919
1920config MSM8X60_FTM_AUDIO_DEVICES
1921 bool "MSM8X60 audio factory test mode support"
1922 depends on MSM8X60_AUDIO
1923 help
1924 Enable support audio factory test mode devices. This is used
1925 in a production line environment.
1926
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1927config RTAC
1928 bool "MSM8K real-time audio calibration support"
1929 default y
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1930 help
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1931 Enable support for rtac. This enables calibration during
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1932 audio operation
1933
1934config MSM7X27A_AUDIO
1935 bool "MSM7X27A audio support"
1936 depends on ARCH_MSM7X27A && MSM_ADSP
1937 default n
1938 help
1939 Enable support for 7x27a. This provides audio functionality.
1940
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1941config MSM_PROC_COMM_REGULATOR
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1942 bool
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1943 depends on MSM_PROC_COMM && REGULATOR
1944 help
1945 Enable regulator framework support for regulators managed by PMLIB
1946 on the modem, and controlled through proccomm calls.
1947
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1948config MSM_VREG_SWITCH_INVERTED
1949 bool "Reverse vreg switch polarity"
1950 default n
1951 help
1952 Reverses the enable and disable for vreg switch.
1953
1954config MSM_DMA_TEST
1955 tristate "MSM DMA test module"
1956 default m
1957 help
1958 Intended to be compiled as a module. Provides a device node
1959 and ioctls for testing the MSM dma system.
1960
1961config WIFI_CONTROL_FUNC
1962 bool "Enable WiFi control function abstraction"
1963 help
1964 Enables Power/Reset/Carddetect function abstraction
1965
1966config WIFI_MEM_PREALLOC
1967 depends on WIFI_CONTROL_FUNC
1968 bool "Preallocate memory for WiFi buffers"
1969 help
1970 Preallocates memory buffers for WiFi driver
1971
1972config QSD_AUDIO
1973 bool "QSD audio"
1974 depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
1975 default y
1976 help
1977 Provides PCM, MP3, and AAC audio playback.
1978
1979config AUDIO_AAC_PLUS
1980 depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
1981 bool "AAC+ Audio"
1982 default y
1983 help
1984 Provides AAC+ decoding
1985
1986config AUDIO_ENHANCED_AAC_PLUS
1987 depends on AUDIO_AAC_PLUS
1988 bool "Enhanced AAC+ Audio"
1989 default y
1990 help
1991 Provides Enhanced AAC+ decoding
1992
1993config SURF_FFA_GPIO_KEYPAD
1994 bool "MSM SURF/FFA GPIO keypad"
1995 depends on INPUT_GPIO = "y"
1996 default y
1997 help
1998 Select if the GPIO keypad is attached.
1999
2000config MSM_SLEEP_TIME_OVERRIDE
2001 bool "Allow overriding suspend/sleep time with PM module parameter"
2002 default y
2003 help
2004 Enable the module parameter sleep_time_override. Specified
2005 in units of seconds, it overwrites the normal sleep time of
2006 suspend. The feature is required for automated power management
2007 testing.
2008
2009config MSM_MEMORY_LOW_POWER_MODE
2010 bool "Control the low power modes of memory"
2011 default n
2012 help
2013 The application processor controls whether memory should enter
2014 which low power mode.
2015
2016choice
2017 prompt "Default Memory Low Power Mode during Idle"
2018 depends on MSM_MEMORY_LOW_POWER_MODE
2019 default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
2020 help
2021 Selects the default low power mode of the memory during idle
2022 sleep.
2023
2024 config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
2025 bool "Memory active"
2026
2027 config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
2028 bool "Memory in retention"
2029
2030 config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
2031 bool "Memory in deep power down"
2032endchoice
2033
2034choice
2035 prompt "Default Memory Low Power Mode during Suspend"
2036 depends on MSM_MEMORY_LOW_POWER_MODE
2037 default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2038 help
2039 Selects the default low power mode of the memory during suspend
2040 sleep.
2041
2042 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2043 bool "Memory active"
2044
2045 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
2046 bool "Memory in retention"
2047
2048 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
2049 bool "Memory in deep power down"
2050endchoice
2051
2052choice
2053 prompt "Power management timeout action"
2054 default MSM_PM_TIMEOUT_HALT
2055 help
2056 Selects the Application Processor's action when Power Management
2057 times out waiting for Modem's handshake.
2058
2059 config MSM_PM_TIMEOUT_HALT
2060 bool "Halt the Application Processor"
2061
2062 config MSM_PM_TIMEOUT_RESET_MODEM
2063 bool "Reset the Modem Processor"
2064
2065 config MSM_PM_TIMEOUT_RESET_CHIP
2066 bool "Reset the entire chip"
2067endchoice
2068
2069config MSM_IDLE_WAIT_ON_MODEM
2070 int "Wait for Modem to become ready for idle power collapse"
2071 default 0
2072 help
2073 If Modem is not ready to handle Application Processor's request
2074 for idle power collapse, wait the number of microseconds in case
2075 Modem becomes ready soon.
2076
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2077config MSM_RPM_REGULATOR
2078 bool "RPM regulator driver"
Matt Wagantall32dc71e2012-01-04 11:13:11 -0800[diff] [blame]2079 depends on MSM_RPM && REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2080 help
2081 Compile in support for the RPM regulator driver, used for setting
2082 voltages and other parameters of the various power rails supplied
2083 by some Qualcomm PMICs.
2084
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]2085config MSM_RPM_REGULATOR_SMD
2086 bool "SMD RPM regulator driver"
2087 depends on REGULATOR
2088 depends on OF
2089 depends on MSM_RPM_SMD
2090 help
2091 Compile in support for the SMD RPM regulator driver which is used for
2092 setting voltages and other parameters of the various power rails
2093 supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
2094 be used on systems which contain an RPM which communicates with the
2095 application processor over SMD.
2096
David Collins037d6482013-03-14 16:53:33 -0700[diff] [blame]2097config MSM_SPM_REGULATOR
2098 bool "SPM regulator driver"
2099 depends on REGULATOR && SPMI && OF_SPMI
2100 help
2101 Enable support for the SPM regulator driver which is used for
2102 setting voltages of processor supply regulators via the SPM module
2103 found inside of the MSM chips. The SPM regulator driver can be used
2104 on MSM systems where the APSS processor cores are supplied by their
2105 own PMIC regulator.
2106
Rohit Vaswani5fd759e2012-11-07 07:05:08 -0800[diff] [blame]2107config MSM_SMCMOD
2108 tristate "Secure Monitor Call (SMC) Module"
2109 default n
2110 depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
2111 help
2112 Enable support for smcmod driver. This driver provides a mechanism
2113 to execute the Secure Monitor Call (SMC) to switch from non-secure
2114 to secure execution in the fsm9xxx targets. This module utilizes Ion
2115 for buffer management.
2116
Stephen Boyd01710582012-07-09 13:40:05 -0700[diff] [blame]2117config MSM_SUBSYSTEM_RESTART
2118 bool "MSM Subsystem Restart"
2119 help
2120 This option enables the MSM subsystem restart framework.
2121
2122 The MSM subsystem restart framework provides support to boot,
2123 shutdown, and restart subsystems with a reference counted API.
2124 It also notifies userspace of transitions between these states via
2125 sysfs.
2126
2127config MSM_SYSMON_COMM
2128 bool "MSM System Monitor communication support"
2129 depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
2130 help
2131 This option adds support for MSM System Monitor library, which
2132 provides an API that may be used for notifying subsystems within
2133 the SoC about other subsystems' power-up/down state-changes.
2134
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2135config MSM_PIL
2136 bool "Peripheral image loading"
2137 select FW_LOADER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2138 default n
2139 help
2140 Some peripherals need to be loaded into memory before they can be
2141 brought out of reset.
2142
2143 Say yes to support these devices.
2144
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2145config MSM_PIL_MODEM
2146 tristate "Modem (ARM11) Boot Support"
Stephen Boyd3ac20732012-05-03 18:46:08 -0700[diff] [blame]2147 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2148 help
2149 Support for booting and shutting down ARM11 Modem processors.
2150
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2151config MSM_PIL_QDSP6V3
2152 tristate "QDSP6v3 (Hexagon) Boot Support"
Stephen Boyd2e19d932012-05-09 17:36:04 -0700[diff] [blame]2153 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2154 help
2155 Support for booting and shutting down QDSP6v3 processors (hexagon).
2156 The QDSP6 is a low power DSP used in audio software applications.
2157
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2158config MSM_PIL_LPASS_QDSP6V4
2159 tristate "LPASS QDSP6v4 (Hexagon) Boot Support"
Stephen Boyda1cf76b2012-06-13 12:05:35 -0700[diff] [blame]2160 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2161 help
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2162 Support for booting and shutting down QDSP6v4 processors (hexagon)
2163 in low power audio subsystems. If you would like to record or
2164 play audio then say Y here.
2165
2166 If unsure, say N.
2167
2168config MSM_PIL_MODEM_QDSP6V4
2169 tristate "Modem QDSP6v4 (Hexagon) Boot Support"
Stephen Boyd2efa9962012-06-12 14:20:12 -0700[diff] [blame]2170 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2171 help
2172 Support for booting and shutting down QDSP6v4 processors (hexagon)
2173 in modem subsystems. If you would like to make or receive phone
2174 calls then say Y here.
2175
2176 If unsure, say N.
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2177
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2178config MSM_PIL_LPASS_QDSP6V5
Stephen Boyd633eb622012-06-13 12:05:35 -0700[diff] [blame]2179 tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
2180 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
2181 help
2182 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2183 in low power audio subsystems. This driver also monitors the ADSP
2184 SMSM status bits and the ADSP's watchdog interrupt and restarts the
2185 ADSP if the processor encounters a fatal error.
Matt Wagantall4e2599e2012-03-21 22:31:35 -0700[diff] [blame]2186
2187config MSM_PIL_MSS_QDSP6V5
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2188 tristate "MSS QDSP6v5 (Hexagon) Boot Support"
2189 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantalle6e00d52012-03-08 17:39:07 -0800[diff] [blame]2190 help
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2191 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2192 in modem subsystems. If you would like to make or receive phone
2193 calls then say Y here.
2194
2195 If unsure, say N.
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2196
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2197config MSM_PIL_RIVA
2198 tristate "RIVA (WCNSS) Boot Support"
Stephen Boydfdec00d2012-05-10 17:04:49 -0700[diff] [blame]2199 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2200 help
2201 Support for booting and shutting down the RIVA processor (WCNSS).
2202 Riva is the wireless subsystem processor used in bluetooth, wireless
2203 LAN, and FM software applications.
2204
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2205config MSM_PIL_TZAPPS
2206 tristate "TZApps Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2207 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2208 help
2209 Support for booting and shutting down TZApps.
2210
2211 TZApps is an image that runs in the secure processor state. It is
2212 used to decrypt data and perform secure operations on the behalf of
2213 the kernel.
2214
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2215config MSM_PIL_DSPS
2216 tristate "DSPS Boot Support"
Stephen Boydf169b4b2012-05-10 17:55:55 -0700[diff] [blame]2217 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2218 help
2219 Support for booting and shutting down ARM7 DSPS processors.
2220
2221 DSPS is a sensors offloading processor used for applications such
2222 as rotation detection, temperature, etc.
2223
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2224config MSM_PIL_VIDC
2225 tristate "Video Core Secure Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2226 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2227 help
2228 Support for authenticating the video core image.
2229
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2230config MSM_PIL_VENUS
2231 tristate "VENUS (Video) Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2232 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2233 help
2234 Support for booting and shutting down the VENUS processor (Video).
2235 Venus is the Video subsystem processor used for video codecs.
2236
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2237config MSM_PIL_GSS
Stephen Boydd86214b2012-05-10 15:26:35 -0700[diff] [blame]2238 tristate "GSS (Cortex A5) Boot Support"
2239 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2240 help
2241 Support for booting and shutting down Cortex A5 processors which run
2242 GPS subsystem firmware.
2243
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2244config MSM_PIL_PRONTO
2245 tristate "PRONTO (WCNSS) Boot Support"
Stephen Boyd581fe852012-06-13 12:05:35 -0700[diff] [blame]2246 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2247 help
2248 Support for booting and shutting down the PRONTO processor (WCNSS).
2249 PRONTO is the wireless subsystem processor used in bluetooth, wireless
2250 LAN, and FM software applications.
2251
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2252config MSM_SCM
2253 bool "Secure Channel Manager (SCM) support"
2254 default n
2255
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2256config SCORPION_Uni_45nm_BUG
2257 bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
2258 depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
2259 default y
2260 help
2261 Invalidating the Instruction Cache by Modified Virtual Address to PoU and
2262 invalidating the Branch Predictor Array by Modified Virtual Address can
2263 create invalid entries in the TLB with the wrong ASID values on Scorpion
2264 Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
2265 workaround for Scorpion Uniprocessor 45nm cores.
2266
2267 This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
2268
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2269config MSM_BUSPM_DEV
2270 tristate "MSM Bus Performance Monitor Kernel Module"
Gagan Mac0d5d49e2012-08-28 19:41:37 -0600[diff] [blame]2271 depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2272 default m
2273 help
2274 This kernel module is used to mmap() hardware registers for the
2275 performance monitors, counters, etc. The module can also be used to
2276 allocate physical memory which is used by bus performance hardware to
2277 dump performance data.
2278
Mona Hossain11c03ac2011-10-26 12:42:10 -0700[diff] [blame]2279config MSM_TZ_LOG
2280 tristate "MSM Trust Zone (TZ) Log Driver"
2281 depends on DEBUG_FS
2282 help
2283 This option enables a driver with a debugfs interface for messages
2284 produced by the Secure code (Trust zone). These messages provide
2285 diagnostic information about TZ operation.
2286
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2287config MSM_RPM_LOG
2288 tristate "MSM Resource Power Manager Log Driver"
2289 depends on DEBUG_FS
Priyanka Mathur49c60802012-12-13 12:53:58 -0800[diff] [blame]2290 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2291 default n
2292 help
2293 This option enables a driver which can read from a circular buffer
2294 of messages produced by the RPM. These messages provide diagnostic
2295 information about RPM operation. The driver outputs the messages
2296 via a debugfs node.
2297
2298config MSM_RPM_STATS_LOG
2299 tristate "MSM Resource Power Manager Stat Driver"
2300 depends on DEBUG_FS
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]2301 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2302 default n
2303 help
2304 This option enables a driver which reads RPM messages from a shared
2305 memory location. These messages provide statistical information about
2306 the low power modes that RPM enters. The drivers outputs the message
2307 via a debugfs node.
2308
Girish Mahadevan898c56d2012-06-05 16:09:19 -0600[diff] [blame]2309config MSM_RPM_RBCPR_STATS_LOG
2310 tristate "MSM Resource Power Manager RPBCPR Stat Driver"
2311 depends on DEBUG_FS
2312 depends on MSM_RPM
2313 help
2314 This option enables a driver which reads RPM messages from a shared
2315 memory location. These messages provide statistical information about
2316 RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
2317 outputs the message via a debugfs node.
2318
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2319config MSM_DIRECT_SCLK_ACCESS
2320 bool "Direct access to the SCLK timer"
2321 default n
2322
2323config IOMMU_API
2324 bool
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]2325
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2326config MSM_GPIOMUX
2327 bool
2328
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2329config MSM_SECURE_IO
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2330 bool
Stepan Moskovchenko0ab847452010-11-12 19:29:57 -0800[diff] [blame]2331
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2332config MSM_NATIVE_RESTART
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]2333 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2334
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]2335config MSM_MODEM_RESTART
2336 bool
2337
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2338config MSM_PM2
2339 depends on PM
2340 bool
2341
2342config MSM_PM8X60
2343 depends on PM
2344 bool
2345
Girish Mahadevan388c3082012-09-10 15:30:36 -0600[diff] [blame]2346config MSM_EVENT_TIMER
2347 bool "Event timer"
2348 help
2349 This option enables a modules that manages a list of event timers that
2350 need to be monitored by the PM. The enables the PM code to monitor
2351 events that require the core to be awake and ready to handle the
2352 event.
2353
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2354config MSM_NOPM
2355 default y if !PM
2356 bool
2357
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2358config MSM_BUS_SCALING
2359 bool "Bus scaling driver"
2360 default n
2361
Gagan Mac85c70492011-06-10 16:07:47 -0600[diff] [blame]2362config MSM_BUS_RPM_MULTI_TIER_ENABLED
2363 bool "RPM Multi-tiering Configuration"
2364 depends on MSM_BUS_SCALING
2365
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2366config MSM_WATCHDOG
2367 bool "MSM Watchdog Support"
Rohit Vaswanie897f842012-03-19 14:19:34 -0700[diff] [blame]2368 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2369 help
2370 This enables the watchdog as is present on 8x60. Currently we use
2371 core 0's watchdog, and reset the entire SoC if it times out. It does
2372 not run during the bootup process, so it will not catch any early
2373 lockups.
2374
Hanumant Singhd1f01022012-07-05 14:21:53 -0700[diff] [blame]2375config MSM_WATCHDOG_V2
2376 bool "MSM Watchdog Support"
2377 help
2378 This enables the watchdog module. It causes kernel panic if the
2379 watchdog times out. It allows for detection of cpu hangs and
2380 deadlocks. It does not run during the bootup process, so it will
2381 not catch any early lockups.
2382
Hanumant Singh5e2541c2012-07-31 14:41:14 -0700[diff] [blame]2383config MSM_MEMORY_DUMP
2384 bool "MSM Memory Dump Support"
2385 help
2386 This enables memory dump feature. It allows various client
2387 subsystems to register respective dump regions. At the time
2388 of deadlocks or cpu hangs these dump regions are captured to
2389 give a snapshot of the system at the time of the crash.
2390
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2391config MSM_DLOAD_MODE
2392 bool "Enable download mode on crashes"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2393 default n
2394 help
2395 This makes the SoC enter download mode when it resets
2396 due to a kernel panic. Note that this doesn't by itself
2397 make the kernel reboot on a kernel panic - that must be
2398 enabled via another mechanism.
2399
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2400config MSM_JTAG
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2401 bool "Debug and ETM trace support across power collapse"
Pratik Patelfd6f56a2011-10-10 17:47:55 -0700[diff] [blame]2402 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2403 Enables support for debugging (specifically breakpoints) and ETM
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2404 processor tracing across power collapse both for JTag and OS hosted
2405 software running on the target. Enabling this will ensure debug
2406 and ETM registers are saved and restored across power collapse.
2407
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2408 If unsure, say 'N' here to avoid potential power, performance and
2409 memory penalty.
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2410
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2411config MSM_JTAG_MM
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2412 bool "Debug and ETM trace support across power collapse using memory mapped access"
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2413 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2414 Enables support for debugging (specifically breakpoints) and ETM
2415 processor tracing across power collapse both for JTag and OS hosted
2416 software running on the target. Enabling this will ensure debug
2417 and ETM registers are saved and restored across power collapse.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2418
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2419 Required on targets on which cp14 access to debug and ETM registers is
2420 not permitted and so memory mapped access is necessary.
2421
2422 If unsure, say 'N' here to avoid potential power, performance and
2423 memory penalty.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2424
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2425config MSM_ETM
2426 tristate "Enable MSM ETM and ETB"
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2427 depends on ARCH_MSM8X60
2428 select MSM_JTAG
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2429 help
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2430 Enables embedded trace collection on MSM8660
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2431
Lynus Vazdde09ee2012-01-05 13:28:22 +0530[diff] [blame]2432config MSM_SLEEP_STATS_DEVICE
2433 bool "Enable exporting of MSM sleep device stats to userspace"
2434
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2435config MSM_RUN_QUEUE_STATS
2436 bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]2437 default n
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]2438 help
2439 This option enalbes statistics collection on Run Queue. A daemon
2440 in user mode, called MPDecision will be using this data to decide
2441 on when to switch off/on the other cores.
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2442
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2443config MSM_STANDALONE_POWER_COLLAPSE
2444 bool "Enable standalone power collapse"
2445 default n
2446
2447config MSM_GSBI9_UART
2448 bool "Enable GSBI9 UART device"
2449 default n
2450 help
2451 This enables GSBI9 configured into UART.
2452
2453config MSM_SHARED_GPIO_FOR_UART2DM
2454 bool "Use shared GPIOs into UART mode"
2455 depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
2456 help
2457 This option configures GPIO muxed with SDC4/MMC3
2458 8-bit mode into UART mode. It is used for serial
2459 console on UART2DM. Say Y if you want to have
2460 serial console on UART2DM.
2461
2462config MSM_SHOW_RESUME_IRQ
2463 bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsmancc147032011-11-23 13:03:56 -0800[diff] [blame]2464 depends on (ARM_GIC || PMIC8058)
2465 default y if PMIC8058
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2466 default n
2467 help
2468 This option logs wake up interrupts that have triggered just before
2469 the resume loop unrolls. Say Y if you want to debug why the system
2470 resumed.
2471
2472config BT_MSM_PINTEST
2473 tristate "MSM Bluetooth Pin Connectivity Test"
2474 depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
2475 default n
2476 help
2477 Bluetooth MSM Pin Connectivity test module.
2478 This driver provides support for verifying the MSM to BT pin
2479 connectivity.
2480
2481config MSM_FAKE_BATTERY
2482 depends on POWER_SUPPLY
2483 default n
2484 bool "MSM Fake Battery"
2485 help
2486 Enables MSM fake battery driver.
2487
2488config MSM_QDSP6_APR
2489 bool "Audio QDSP6 APR support"
2490 depends on MSM_SMD
2491 default n
2492 help
2493 Enable APR IPC protocol support between
2494 application processor and QDSP6. APR is
2495 used by audio driver to configure QDSP6's
2496 ASM, ADM and AFE.
2497
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]2498config MSM_QDSP6_APRV2
2499 bool "Audio QDSP6 APRv2 support"
2500 depends on MSM_SMD
2501 default n
2502 help
2503 Enable APRv2 IPC protocol support between
2504 application processor and QDSP6. APR is
2505 used by audio driver to configure QDSP6's
2506 ASM, ADM and AFE.
2507
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]2508config MSM_QDSP6_CODECS
2509 bool "Audio Codecs on QDSP6 APR "
2510 depends on MSM_SMD
2511 default n
2512 help
2513 Enable Audio codecs with APR IPC protocol support between
2514 application processor and QDSP6. APR is
2515 used by audio driver to configure QDSP6's
2516 ASM, ADM and AFE.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2517
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2518config MSM_QDSP6V2_CODECS
2519 bool "Audio QDSP6V2 APR support"
2520 depends on MSM_SMD
2521 help
2522 Enable Audio codecs with APR IPC protocol support between
2523 application processor and QDSP6 for B-family. APR is
2524 used by audio driver to configure QDSP6's
2525 ASM, ADM and AFE.
2526
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2527config MSM_AUDIO_QDSP6
2528 bool "QDSP6 HW Audio support"
2529 select SND_SOC_MSM_QDSP6_INTF
2530 default n
2531 help
2532 Enable HW audio support in QDSP6.
2533 QDSP6 can support HW encoder & decoder and audio processing
2534
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2535config MSM_AUDIO_QDSP6V2
2536 bool "QDSP6V2 HW Audio support"
2537 select SND_SOC_MSM_QDSP6V2_INTF
2538 help
2539 Enable HW audio support in QDSP6V2.
2540 QDSP6V2 can support HW encoder & decoder and
2541 audio processing. It will enable support for
2542 AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
2543 others.
2544
Joonwoo Park4a14a552012-08-02 11:03:21 -0700[diff] [blame]2545config MSM_ADSP_LOADER
2546 tristate "ADSP loader support"
2547 select SND_SOC_MSM_APRV2_INTF
2548 depends on MSM_AUDIO_QDSP6V2 && m
2549 help
2550 Enable ADSP image loader.
2551 The ADSP loader brings ADSP out of reset
2552 for the platforms that use APRv2.
2553 Say M if you want to enable this module.
2554
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2555config MSM_ULTRASOUND_A
2556 bool "QDSP6 HW Ultrasound support"
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2557 help
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2558 Enable HW ultrasound support in QDSP6.
2559 QDSP6 can support HW encoder & decoder and
2560 ultrasound processing. It will enable
2561 ultrasound data paths between
2562 HW and services, calculating input events
2563 upon the ultrasound data.
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2564
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]2565config MSM_ULTRASOUND_B
2566 bool "QDSP6V2 HW Ultrasound support"
2567 help
2568 Enable HW Ultrasound support in QDSP6V2.
2569 QDSP6V2 can support HW encoder & decoder and
2570 ultrasound processing. It will enable
2571 ultrasound data paths between
2572 HW and services, calculating input events
2573 upon the ultrasound data.
2574
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2575config MSM_RPC_VIBRATOR
2576 bool "RPC based MSM Vibrator Support"
2577 depends on MSM_ONCRPCROUTER
2578 help
2579 Enable the vibrator support on MSM over RPC. The vibrator
2580 is connected on the PMIC. Say Y if you want to enable this
2581 feature.
2582
2583config PM8XXX_RPC_VIBRATOR
2584 bool "RPC based Vibrator on PM8xxx PMICs"
2585 depends on MSM_RPC_VIBRATOR
2586 help
2587 Enable the vibrator support on MSM over RPC. The vibrator
2588 is connected on the PM8XXX PMIC. Say Y if you want to enable
2589 this feature.
2590
2591config MSM_SPM_V1
2592 bool "Driver support for SPM Version 1"
2593 help
2594 Enables the support for Version 1 of the SPM driver. SPM hardware is
2595 used to manage the processor power during sleep. The driver allows
2596 configuring SPM to allow different power modes.
2597
2598config MSM_SPM_V2
2599 bool "Driver support for SPM Version 2"
2600 help
2601 Enables the support for Version 2 of the SPM driver. SPM hardware is
2602 used to manage the processor power during sleep. The driver allows
2603 configuring SPM to allow different power modes.
2604
2605config MSM_L2_SPM
2606 bool "SPM support for L2 cache"
2607 depends on MSM_SPM_V2
2608 help
2609 Enable SPM driver support for L2 cache. Some MSM chipsets allow
2610 control of L2 cache low power mode with a Subsystem Power manager.
2611 Enabling this driver allows configuring L2 SPM for low power modes
2612 on supported chipsets.
2613
Laura Abbott2d1760b2011-09-29 21:31:24 -0700[diff] [blame]2614config MSM_MULTIMEDIA_USE_ION
2615 bool "Multimedia suport using Ion"
2616 depends on ION_MSM
2617 help
2618 Enable support for multimedia drivers using Ion for buffer management
2619 instead of pmem. Selecting this may also involve userspace
2620 dependencies as well.
2621
Naveen Ramaraj51f5e8b2012-04-09 15:58:40 -0700[diff] [blame]2622config MSM_OCMEM
2623 bool "MSM On-Chip memory driver (OCMEM)"
2624 help
2625 Enable support for On-Chip Memory available on certain MSM chipsets.
2626 OCMEM is a low latency, high performance pool shared by subsystems.
2627
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2628config MSM_OCMEM_LOCAL_POWER_CTRL
2629 bool "OCMEM Local Power Control"
2630 depends on MSM_OCMEM
2631 help
2632 Enable direct power management of the OCMEM core by the
2633 OCMEM driver. By default power management is delegated to
2634 the RPM. Selecting this option causes the OCMEM driver to
2635 directly handle the various macro power transitions.
2636
2637config MSM_OCMEM_DEBUG
2638 bool "OCMEM Debug Support"
2639 depends on MSM_OCMEM
2640 help
2641 Enable debug options for On-chip Memory (OCMEM) driver.
2642 Various debug options include memory, power and latency.
2643 Choosing one of these options allows debugging of each
2644 individual subsystem separately.
2645
Naveen Ramarajc71b2de2012-08-20 12:35:52 -0700[diff] [blame]2646config MSM_OCMEM_NONSECURE
2647 bool "OCMEM Non Secure Mode"
2648 depends on MSM_OCMEM_DEBUG
2649 help
2650 Disable OCMEM interaction with secure processor.
2651 By default OCMEM is secured and accesses for each master
2652 is requested by the OCMEM driver. Selecting this option
2653 causes the OCMEM memory to be in non-secure state unless
2654 its locked down by the secure processor.
2655
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2656config MSM_OCMEM_POWER_DEBUG
2657 bool "OCMEM Power Debug Support"
2658 depends on MSM_OCMEM_DEBUG
2659 help
2660 Enable debug support for OCMEM power management.
2661 This adds support for verifying all power management
2662 related operations of OCMEM. Both local power management
2663 and RPM assisted power management operations are supported.
2664
Naveen Ramaraj4b1d9392012-08-06 21:05:14 -0700[diff] [blame]2665config MSM_OCMEM_POWER_DISABLE
2666 bool "OCMEM Disable Power Control"
2667 depends on MSM_OCMEM_DEBUG
2668 help
2669 Disable all OCMEM power management.
2670 This keeps all OCMEM macros turned ON at all times thus
2671 never allowing them to be turned OFF. Both local power
2672 management and RPM assisted power modes are supported.
2673
Naveen Ramaraj88f23632012-10-10 12:23:29 -0700[diff] [blame]2674config SENSORS_ADSP
2675 bool "Enable Sensors Driver Support for ADSP"
2676 help
2677 Add support for sensors ADSP driver.
2678 This driver is used for exercising different sensors use cases,
2679 such as for lower-power OCMEM use cases, and for time syncing
2680 with ADSP clock.
2681
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2682config MSM_RTB
2683 bool "Register tracing"
2684 help
2685 Add support for logging different events to a small uncached
2686 region. This is designed to aid in debugging reset cases where the
2687 caches may not be flushed before the target resets.
2688
2689config MSM_RTB_SEPARATE_CPUS
2690 bool "Separate entries for each cpu"
2691 depends on MSM_RTB
Laura Abbott9959f982012-02-28 11:30:50 -0800[diff] [blame]2692 depends on SMP
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2693 help
2694 Under some circumstances, it may be beneficial to give dedicated space
2695 for each cpu to log accesses. Selecting this option will log each cpu
2696 separately. This will guarantee that the last acesses for each cpu
2697 will be logged but there will be fewer entries per cpu
2698
Stepan Moskovchenko57884842012-06-07 17:35:49 -0700[diff] [blame]2699config MSM_EBI_ERP
2700 bool "External Bus Interface (EBI) error reporting"
2701 help
2702 Say 'Y' here to enable reporting of external bus interface errors to
2703 the kernel log. Information such as the offending address and
2704 transaction type will be logged. This may be useful for debugging
2705 seemingly broken memory accesses.
2706
2707 For production builds, you should probably say 'N' here.
2708
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2709config MSM_CACHE_ERP
2710 bool "Cache / CPU error reporting"
2711 depends on ARCH_MSM_KRAIT
2712 help
2713 Say 'Y' here to enable reporting of cache and TLB errors to the kernel
2714 log. Enabling this feature can be used as a system debugging technique
2715 if cache corruption is suspected. Cache error statistics will also be
2716 reported in /proc/cpu/msm_cache_erp.
2717
2718 For production builds, you should probably say 'N' here.
2719
2720config MSM_L1_ERR_PANIC
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2721 bool "Panic on L1 cache errors"
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2722 depends on MSM_CACHE_ERP
2723 help
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2724 To cause the kernel to panic whenever an L1 cache error is detected, say
2725 'Y' here. This may be useful as a debugging technique if general system
2726 instability is suspected.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2727
2728 For production builds, you should probably say 'N' here.
2729
Stepan Moskovchenkoe1aba3d2012-12-06 18:40:25 -0800[diff] [blame]2730config MSM_L1_RECOV_ERR_PANIC
2731 bool "Panic on recoverable L1 cache errors"
2732 depends on MSM_CACHE_ERP && MSM_L1_ERR_PANIC
2733 help
2734 Certain CPU designs may be able to automatically recover from certain
2735 kinds of L1 cache errors, even though the L1 cache itself may not
2736 support error correction. These errors should not result in any kind
2737 of corruption, but their presence is nevertheless an indication of
2738 poor system health. To cause the kernel to panic whenever a
2739 recoverable L1 cache error is detected, say 'Y' here. This may be
2740 useful as a debugging technique if general system instability is
2741 suspected.
2742
2743 For production builds, you should definitely say 'N' here.
2744
Stepan Moskovchenko7035f652012-05-31 17:48:01 -0700[diff] [blame]2745config MSM_L1_ERR_LOG
2746 bool "Log CPU ERP events to system memory"
2747 depends on MSM_CACHE_ERP
2748 help
2749 Enable logging CPU ERP events to an area of memory that will be
2750 preserved across a system reset. This may be useful for detecting and
2751 troubleshooting ERP-related system crashes in the field.
2752
2753 For production builds, you may want to say 'Y' here.
2754
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2755config MSM_L2_ERP_PRINT_ACCESS_ERRORS
2756 bool "Report L2 master port slave/decode errors in kernel log"
2757 depends on MSM_CACHE_ERP
2758 help
2759 Master port errors can occur when a memory request is not properly
2760 handled by the destination slave. This can occur if the destination
2761 register does not exist or is inaccessible due to security
2762 restrictions or (in some cases) clock configuration. Enabling this
2763 option will cause a backtrace to be printed to the kernel log whenever
2764 such an error is encountered. Note that the error is reported as an
2765 interrupt rather than as an exception, meaning that the backtrace may
2766 have some skid. This option may help with debugging, though production
2767 builds should probably say 'N' here.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2768
2769config MSM_L2_ERP_PORT_PANIC
2770 bool "Panic on L2 master port errors"
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2771 depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2772 help
2773 Master port errors can occur when a memory request is not properly
2774 handled by the destination slave. Enable this option to catch drivers
2775 which attempt to access bad areas of the address space, or access
2776 hardware registers in an improper state (such as certain clocks not
2777 being on). This option may help with debugging, though production
2778 builds should probably say 'N' here.
2779
2780config MSM_L2_ERP_1BIT_PANIC
2781 bool "Panic on recoverable L2 soft errors"
2782 depends on MSM_CACHE_ERP
2783 help
2784 Enable this option to cause a kernel panic whenever the L2 cache
2785 encounters a single-bit (correctable) soft error. This option should
2786 only be enabled when doing low-level debugging where cache corruption
2787 is suspected.
2788
2789 For production builds, you should definitely say 'N' here.
2790
2791config MSM_L2_ERP_2BIT_PANIC
2792 bool "Panic on unrecoverable L2 soft errors"
2793 depends on MSM_CACHE_ERP
2794 help
2795 Enable this option to cause a kernel panic whenever the L2 cache
2796 encounters a double-bit (non-correctable) soft error. Debug builds
2797 will likely benefit from having this option enabled to catch cache
2798 problems as soon as possible.
2799
2800 For production builds, it may be acceptable to say 'N' here, since
2801 an uncorrectable error might not necessarily cause further problems.
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2802
Praveen Chidambaramf53ef1b2011-12-06 08:27:49 -0700[diff] [blame]2803config MSM_DCVS
2804 bool "Use MSM DCVS for CPU/GPU Frequency control"
2805 depends on MSM_SCM
2806 help
2807 Enable support for MSM DCVS to control all CPU and GPU core frequencies.
2808 The DCVS manager allows idle driver to feed the idle information to the
2809 algorithm and the algorithm returns a frequency for the core which is
2810 passed to the frequency change driver.
2811
Pankaj Kumar32ce1ea2012-04-04 20:29:29 +0530[diff] [blame]2812config MSM_CPR
2813 tristate "Use MSM CPR in S/W mode"
2814 help
2815 Enable CPR (core power reduction) in S/W mode, where the processor
2816 get's the notification from CPR block and programs the PMIC.
2817
2818config MSM_VP_REGULATOR
2819 tristate "Use MSM PMIC8029 C2 regulator"
2820 depends on ARCH_MSM8625
2821 help
2822 Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
2823 for MSMs like 8625.
2824
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]2825config HAVE_ARCH_HAS_CURRENT_TIMER
2826 bool
Laura Abbott306bcc22012-03-08 11:24:53 -0800[diff] [blame]2827
2828config MSM_CACHE_DUMP
2829 bool "Cache dumping support"
2830 help
2831 Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
2832 This allows for analysis of the caches in case cache corruption is
2833 suspected.
2834
Laura Abbott7b637362012-03-29 16:43:49 -0700[diff] [blame]2835config MSM_CACHE_DUMP_ON_PANIC
2836 bool "Dump caches on panic"
2837 depends on MSM_CACHE_DUMP
2838 help
2839 By default, the caches are flushed on panic. This means that trying to
2840 look at them in a RAM dump will give useless data. Select this if you
2841 want to dump the L1 and L2 caches on panic before any flush occurs.
2842 If unsure, say N
2843
Jack Phamccbbfab2012-04-09 19:50:20 -0700[diff] [blame]2844config MSM_HSIC_SYSMON
2845 tristate "MSM HSIC system monitor driver"
2846 depends on USB
2847 help
2848 Add support for bridging with the system monitor interface of MDM
2849 over HSIC. This driver allows the local system monitor to
2850 communicate with the remote system monitor interface.
2851
2852config MSM_HSIC_SYSMON_TEST
2853 tristate "MSM HSIC system monitor bridge test"
2854 depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
2855 help
2856 Enable the test hook for the Qualcomm system monitor HSIC driver.
2857 This will create a debugfs file entry named "hsic_sysmon_test" which
2858 can be read and written to send character data to the sysmon port of
2859 the modem over USB.
2860
Anirudh Ghayal0d2291a2012-09-20 21:31:41 +0530[diff] [blame]2861config MSM_RPC_PMIC
2862 tristate "MSM RPC PMIC driver"
2863 depends on MSM_ONCRPCROUTER
2864 help
2865 This driver supports the PMIC functionality over RPC for those MSM's
2866 which do not have a direct access to PMIC. It supports ability to
2867 configure MPP, GPIO and all the other supported peripherals of the
2868 PMIC.
2869
Anirudh Ghayald3a63732012-09-20 22:13:13 +0530[diff] [blame]2870config MSM_RPC_USB
2871 tristate "MSM RPC USB driver"
2872 depends on MSM_ONCRPCROUTER
2873 help
2874 This driver supports the USB configuration support over the RPC
2875 interface. It support the HS USB module connected to the MSM
2876 and FS USB which is connected over the PMIC. This support is
2877 required for MSMs on which the APPS does not have a direct access
2878 to the PMIC.
2879
2880config MSM_RPC_PMAPP
2881 tristate "MSM RPC PMIC APP driver"
2882 depends on MSM_ONCRPCROUTER
2883 help
2884 This driver supports the configuration of various PMIC APP modules
2885 such as display backlight, vreg pin-ctrl, smps clock over the RPC
2886 interface. This support is required for MSMs on which the APPS
2887 does not have a direct access to the PMIC.
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2888
2889config MSM_ENABLE_WDOG_DEBUG_CONTROL
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2890 bool "Enable control of watchdog debug and boot partition select"
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2891 help
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2892 Enables support for controlling watchdog debug and boot partition
2893 select. This is currently used to bypass debug image for PS_HOLD reset
2894 by disabling watchdog debug and boot partition select. This allows
2895 for a clean MSM reset for reboot scenarios.
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2896
2897config MSM_FIQ
2898 bool "Enable FIQ for debugging"
2899 depends on ARCH_MSM8625
2900 select FIQ
Taniya Das36e4aa12012-07-04 18:27:16 +0530[diff] [blame]2901 select GIC_SECURE
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2902 help
2903 Enable any line to be used as an FIQ. This will help debugging
2904 if apps is not responding and holding lock with irqs disabled.
2905 Modem will then generate an raise a FIQ on this line before sending
2906 SMSM reset.
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]2907
2908config MSM_USE_USER_ACCESSIBLE_TIMERS
2909 bool "Enables mapping an MSM timer counter page to user space."
2910 depends on ARM_USE_USER_ACCESSIBLE_TIMERS
2911 help
2912 Enables MSM-specific user accessible timers via a shared
2913 memory page containing the cycle counter.
2914
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]2915config USE_DEV_CTRL_VOLUME
2916 bool "Use Device Control Volume"
2917 help
2918 Use Device Control Volume as opposed to ALSA volume control.
2919
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]2920config MSM_CPU_PWRCTL
2921 bool "Ensures that krait droop detectors are always off"
2922 help
2923 Droop detector mechanism can adversely affect krait plls during
2924 stand alone power collapse operation. Selecting this option
2925 ensures that they are always off.
2926
Saket Saurabh6089f952012-12-07 15:49:13 +0530[diff] [blame]2927config MSM_UARTDM_Core_v14
2928 bool "Use MSM BLSP based HSUART Core v1.4"
2929 depends on SERIAL_MSM_HS
2930 help
2931 Select if BLSP based UART Core v.14 or higher is present.
Abhimanyu Kapurcf3ed152013-03-01 19:32:19 -0800[diff] [blame]2932
2933config MSM_BOOT_STATS
2934 bool "Use MSM boot stats reporting"
2935 help
2936 Use this to report msm boot stats such as bootloader throughput,
2937 display init, total boot time.
2938 This figures are reported in mpm sleep clock cycles and have a
2939 resolution of 31 bits as 1 bit is used as an overflow check.
Syed Rameez Mustafa37f93472013-03-18 15:49:48 -0700[diff] [blame]2940
2941config MSM_XPU_ERR_FATAL
2942 bool "Configure XPU violations as fatal errors"
2943 help
2944 Select if XPU violations have to be configured as fatal errors.
Willie Ruan2635a852013-03-17 16:33:42 -0700[diff] [blame]2945
2946config MSM_CPR_REGULATOR
2947 bool "RBCPR regulator driver for APC"
2948 depends on REGULATOR
2949 depends on OF
2950 help
2951 Compile in RBCPR (RapidBridge Core Power Reduction) driver to support
2952 corner vote for APC power rail. The driver takes PTE process voltage
2953 suggestions in efuse as initial settings. It converts corner vote
2954 to voltage value before writing to a voltage regulator API, such as
2955 that provided by spm-regulator driver.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2956endif